From d82603c6da7579c50ebe3fe7da6e3e267d9f6427 Mon Sep 17 00:00:00 2001 From: Jorrit Schippers Date: Thu, 27 Dec 2012 17:33:02 +0100 Subject: treewide: Replace incomming with incoming in all comments and strings Signed-off-by: Jorrit Schippers Signed-off-by: Jiri Kosina diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c index 116dea1..dfdfe8b 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -175,7 +175,7 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ @@ -210,7 +210,7 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h index 6a6e52f..01c8ddd 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-util.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h @@ -60,7 +60,7 @@ extern int cvmx_helper_dump_packet(cvmx_wqe_t *work); * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ @@ -74,7 +74,7 @@ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh, * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index 6336bcb..5f0581e 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -528,7 +528,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (!test_bit(IBS_STARTED, pcpu->state)) { /* * Catch spurious interrupts after stopping IBS: After - * disabling IBS there could be still incomming NMIs + * disabling IBS there could be still incoming NMIs * with samples that even have the valid bit cleared. * Mark all this NMIs as handled. */ diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 1630150..eb325ba 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -311,7 +311,7 @@ config HID_LOGITECH_DJ Say Y if you want support for Logitech Unifying receivers and devices. Unifying receivers are capable of pairing up to 6 Logitech compliant devices to the same receiver. Without this driver it will be handled by - generic USB_HID driver and all incomming events will be multiplexed + generic USB_HID driver and all incoming events will be multiplexed into a single mouse and a single keyboard device. config LOGITECH_FF diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h index 3942efb..a315a29 100644 --- a/drivers/isdn/hardware/eicon/divacapi.h +++ b/drivers/isdn/hardware/eicon/divacapi.h @@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER { #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */ @@ -1125,7 +1125,7 @@ extern word li_total_channels; | Direction | word | Enable compression/decompression for | | | | 0: All direction | | | | 1: disable outgoing data | - | | | 2: disable incomming data | + | | | 2: disable incoming data | | | | 3: disable both direction (default) | +---------------------+------+-----------------------------------------+ | Number of code | word | Parameter P1 of V.42bis in accordance | diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h index 889dc98..329c0c2 100644 --- a/drivers/isdn/hardware/eicon/pc.h +++ b/drivers/isdn/hardware/eicon/pc.h @@ -419,11 +419,11 @@ struct dual #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* x.75 with V.42bis */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */ #define LISTENER 27 /* Layer 2 to listen line */ diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index db50f78..d67126db 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -692,7 +692,7 @@ l1oip_socket_thread(void *data) hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip); hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport); - /* bind to incomming port */ + /* bind to incoming port */ if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local, sizeof(hc->sin_local))) { printk(KERN_ERR "%s: Failed to bind socket to port %d.\n", diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 9fd9d1c..4544a07 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -312,7 +312,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { /* * This is a generic configuration which is valid for most * prp input-output format combinations. - * We set the incomming and outgoing pixelformat to a + * We set the incoming and outgoing pixelformat to a * 16 Bit wide format and adjust the bytesperline * accordingly. With this configuration the inputdata * will not be changed by the emma and could be any type diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d5648fc..2bf4c08 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8498,7 +8498,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); } else { - /* Prevent incomming interrupts in IGU */ + /* Prevent incoming interrupts in IGU */ val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index a52922e..d09b0d9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -64,7 +64,7 @@ static const char mlx4_en_version[] = /* Enable RSS UDP traffic */ MLX4_EN_PARM_INT(udp_rss, 1, - "Enable RSS for incomming UDP traffic or disabled (0)"); + "Enable RSS for incoming UDP traffic or disabled (0)"); /* Priority pausing */ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 8487204..9cea451 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) /* Enable Interuupt */ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM - /* Be ready for incomming frames */ + /* Be ready for incoming frames */ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete } /* Go to SIR Speed */ diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h index 2f7d195..629372f 100644 --- a/drivers/staging/android/binder.h +++ b/drivers/staging/android/binder.h @@ -224,7 +224,7 @@ enum BinderDriverReturnProtocol { BR_SPAWN_LOOPER = _IO('r', 13), /* * No parameters. The driver has determined that a process has no - * threads waiting to service incomming transactions. When a process + * threads waiting to service incoming transactions. When a process * receives this command, it must spawn a new service thread and * register it via bcENTER_LOOPER. */ diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 683bedc..b595b9d 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -72,7 +72,7 @@ int pow_receive_group = 15; module_param(pow_receive_group, int, 0444); MODULE_PARM_DESC(pow_receive_group, "\n" "\tPOW group to receive packets from. All ethernet hardware\n" - "\twill be configured to send incomming packets to this POW\n" + "\twill be configured to send incoming packets to this POW\n" "\tgroup. Also any other software can submit packets to this\n" "\tgroup for the kernel to process."); diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c index b4ba067..97a511f 100644 --- a/drivers/tty/ipwireless/hardware.c +++ b/drivers/tty/ipwireless/hardware.c @@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw, (*assem) = pool_allocate(hw, *assem, length); if (!(*assem)) { printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming data packet, dropped!\n"); + ": no memory for incoming data packet, dropped!\n"); return; } (*assem)->protocol = protocol; @@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw, packet = pool_allocate(hw, NULL, length); if (!packet) { printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming ctrl packet, dropped!\n"); + ": no memory for incoming ctrl packet, dropped!\n"); return; } packet->protocol = protocol; diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h index 591f786..f741091 100644 --- a/include/net/irda/irlmp.h +++ b/include/net/irda/irlmp.h @@ -278,7 +278,7 @@ static inline int irlmp_lap_tx_queue_full(struct lsap_cb *self) } /* After doing a irlmp_dup(), this get one of the two socket back into - * a state where it's waiting incomming connections. + * a state where it's waiting incoming connections. * Note : this can be used *only* if the socket is not yet connected * (i.e. NO irlmp_connect_response() done on this socket). * - Jean II */ diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h index af4b877..98682d4 100644 --- a/include/net/irda/irttp.h +++ b/include/net/irda/irttp.h @@ -185,7 +185,7 @@ static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self) } /* After doing a irttp_dup(), this get one of the two socket back into - * a state where it's waiting incomming connections. + * a state where it's waiting incoming connections. * Note : this can be used *only* if the socket is not yet connected * (i.e. NO irttp_connect_response() done on this socket). * - Jean II */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 8a0ce70..8de421d 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1855,7 +1855,7 @@ int hci_recv_frame(struct sk_buff *skb) return -ENXIO; } - /* Incomming skb */ + /* Incoming skb */ bt_cb(skb)->incoming = 1; /* Time stamp */ diff --git a/net/irda/timer.c b/net/irda/timer.c index 1d552b3..0c4c115 100644 --- a/net/irda/timer.c +++ b/net/irda/timer.c @@ -57,7 +57,7 @@ void irlap_start_query_timer(struct irlap_cb *self, int S, int s) * Basically, we multiply the number of remaining slots by our * slot time, plus add some extra time to properly receive the last * discovery packet (which is longer due to extra discovery info), - * to avoid messing with for incomming connections requests and + * to avoid messing with for incoming connections requests and * to accommodate devices that perform discovery slower than us. * Jean II */ timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index fbe1636..16a1085 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1181,7 +1181,7 @@ nodata: * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT) * This is a helper function to allocate an error chunk for * for those invalid parameter codes in which we may not want - * to report all the errors, if the incomming chunk is large + * to report all the errors, if the incoming chunk is large */ static inline struct sctp_chunk *sctp_make_op_error_fixed( const struct sctp_association *asoc, -- cgit v0.10.2