From 1d9dbf154295aa33819b08340464ff15495e83d8 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 11 Jul 2014 11:03:39 +0000 Subject: ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt As of: 4845934 ACPI / scan: use platform bus type by default for _HID enumeration ACPI uses the platform bus by default, changing the opt-in to an opt-out policy, eliminating the acpi_platform_device_ids table and replacing it with forbidden_id_list[]. Remove the qualifying paragraph from the acpi/enumeration documentation as it no longer applies. Reported-by: Max Eliaser Signed-off-by: Darren Hart Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index fd786ea..e182be5 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and configuring GPIOs it can get its ACPI handle and extract this information from ACPI tables. -Currently the kernel is not able to automatically determine from which ACPI -device it should make the corresponding platform device so we need to add -the ACPI device explicitly to acpi_platform_device_ids list defined in -drivers/acpi/acpi_platform.c. This limitation is only for the platform -devices, SPI and I2C devices are created automatically as described below. - DMA support ~~~~~~~~~~~ DMA controllers enumerated via ACPI should be registered in the system to -- cgit v0.10.2 From 2843768b701971ab10e62c77d5c75ad7c306f1bd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 14 Jul 2014 19:35:45 +0200 Subject: Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 886129a8eebeb (ACPI / video: change acpi-video brightness_switch_enabled default to 0) as it is reported to cause problems to happen. Fixes: 886129a8eebeb (ACPI / video: change acpi-video brightness_switch_enabled default to 0) Link: http://marc.info/?l=linux-acpi&m=140534286826819&w=2 Reported by: Bjørn Mork Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c1b9aa8..e332e71 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3526,7 +3526,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the allocated input device; If set to 0, video driver will only send out the event without touching backlight brightness level. - default: 0 + default: 1 virtio_mmio.device= [VMMIO] Memory mapped virtio (platform) device. diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 071c1df..29649c1 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -68,7 +68,7 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); -static bool brightness_switch_enabled; +static bool brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); /* -- cgit v0.10.2 From 4320f6b1d9db4ca912c5eb6ecb328b2e090e1586 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Jul 2014 08:51:27 +0200 Subject: PM / sleep: Fix request_firmware() error at resume The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc0374254 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790 Cc: 3.4+ # 3.4+ Signed-off-by: Takashi Iwai Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/process.c b/kernel/power/process.c index 0ca8d83..4ee194e 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -186,6 +186,7 @@ void thaw_processes(void) printk("Restarting tasks ... "); + __usermodehelper_set_disable_depth(UMH_FREEZING); thaw_workqueues(); read_lock(&tasklist_lock); -- cgit v0.10.2 From 653a3538f865d26350727df25397bee2bacde773 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 15 Jul 2014 14:26:13 +0200 Subject: PM / sleep: fix freeze_ops NULL pointer dereferences This patch fixes a NULL pointer dereference issue introduced by commit 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state). Fixes: 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state) Link: http://marc.info/?l=linux-pm&m=140541182017443&w=2 Reported-and-tested-by: Alexander Stein Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 4dd8822..ed35a47 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -306,7 +306,7 @@ int suspend_devices_and_enter(suspend_state_t state) error = suspend_ops->begin(state); if (error) goto Close; - } else if (state == PM_SUSPEND_FREEZE && freeze_ops->begin) { + } else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) { error = freeze_ops->begin(); if (error) goto Close; @@ -335,7 +335,7 @@ int suspend_devices_and_enter(suspend_state_t state) Close: if (need_suspend_ops(state) && suspend_ops->end) suspend_ops->end(); - else if (state == PM_SUSPEND_FREEZE && freeze_ops->end) + else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end) freeze_ops->end(); return error; -- cgit v0.10.2 From 4cf465b579c20bee868464f5d664f8d2d96cd370 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 16 Jul 2014 13:28:34 +0200 Subject: ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s As reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1025690 This is yet another model which needs this quirk. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1025690 Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 29649c1..350d52a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -581,6 +581,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, { .callback = video_set_use_native_backlight, + .ident = "HP ProBook 4540s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4540s"), + }, + }, + { + .callback = video_set_use_native_backlight, .ident = "HP ProBook 2013 models", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), -- cgit v0.10.2 From 97d496bf1a7934c77f8bb0de9b773dd759def616 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 12 Jul 2014 11:43:33 +0200 Subject: cpufreq: sa1110: set memory type for h3600 The Compaq iPAQ h3600 also has the K4S281632b-1H memory type. Verified by prying apart a broken board. Signed-off-by: Linus Walleij Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index 5463767..b5befc2 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -349,7 +349,7 @@ static int __init sa1110_clk_init(void) name = "K4S641632D"; if (machine_is_h3100()) name = "KM416S4030CT"; - if (machine_is_jornada720()) + if (machine_is_jornada720() || machine_is_h3600()) name = "K4S281632B-1H"; if (machine_is_nanoengine()) name = "MT48LC8M16A2TG-75"; -- cgit v0.10.2 From 7e02168711e70a93a4795870e028a260702bdcb5 Mon Sep 17 00:00:00 2001 From: Nicolas Del Piano Date: Sun, 13 Jul 2014 18:59:00 -0300 Subject: cpufreq: imx6q: Select PM_OPP PM_OPP is a library used by several of the existing cpufreq drivers. ARM IMX6Q cpufreq driver uses this library for its functionality. Thus, it should be selected in Kconfig. Reported-by: Ezequiel Garcia Signed-off-by: Nicolas Del Piano Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index ebac671..8c5cf4b 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -104,6 +104,7 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC depends on REGULATOR_ANATOP + select PM_OPP help This adds cpufreq driver support for Freescale i.MX6 series SoCs. -- cgit v0.10.2 From 2fa1adc07089020984d52bb55c5af0b9d86dff21 Mon Sep 17 00:00:00 2001 From: Quentin Armitage Date: Thu, 10 Jul 2014 11:15:55 +0100 Subject: cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD Commit ff1f0018cf66080d8e6f59791e552615648a033a ("drivers: Enable building of Kirkwood drivers for mach-mvebu") added Kirkwood into mach-mvebu, adding MACH_KIRKWOOD to ARCH_KIRKWOOD in the KConfig files. The change for ARM_KIRKWOOD_CPUFREQ replaced ARCH_KIRKWOOD with MACH_KIRKWOOD, whereas all the other changes were ARCH_KIRKWOOD || MACH_KIRKWOOD. As a consequence of this change, the cpufreq driver is no longer enabled for ARCH_KIRKWOOD. This patch reinstates ARM_KIRKWOOD_CPUFREQ for ARCH_KIRKWOOD. Signed-off-by: Quentin Armitage Acked-by: Andrew Lunn Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 8c5cf4b..7364a53 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -119,7 +119,7 @@ config ARM_INTEGRATOR If in doubt, say Y. config ARM_KIRKWOOD_CPUFREQ - def_bool MACH_KIRKWOOD + def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD help This adds the CPUFreq driver for Marvell Kirkwood SoCs. -- cgit v0.10.2 From 1bf8cc3d017575a38d4361f56ccc0a670a16bcd9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 11 Jul 2014 20:24:19 +0530 Subject: cpufreq: cpu0: OPPs can be populated at runtime OPPs can be populated statically, via DT, or added at run time with dev_pm_opp_add(). While this driver handles the first case correctly, it would fail to populate OPPs added at runtime. Because call to of_init_opp_table() would fail as there are no OPPs in DT and probe will return early. To fix this, remove error checking and call dev_pm_opp_init_cpufreq_table() unconditionally. Update bindings as well. Suggested-by: Stephen Boyd Tested-by: Stephen Boyd Signed-off-by: Viresh Kumar Acked-by: Santosh Shilimkar Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index f055515..366690c 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined under node /cpus/cpu@0. Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt - for details +- None Optional properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for + details. OPPs *must* be supplied either via DT, i.e. this property, or + populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index ee1ae30..86beda9 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -152,11 +152,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_reg; } - ret = of_init_opp_table(cpu_dev); - if (ret) { - pr_err("failed to init OPP table: %d\n", ret); - goto out_put_clk; - } + /* OPPs might be populated at runtime, don't check for error here */ + of_init_opp_table(cpu_dev); ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { -- cgit v0.10.2 From 92c14bd9477a20a83144f08c0ca25b0308bf0730 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 17 Jul 2014 10:48:25 +0530 Subject: cpufreq: move policy kobj to policy->cpu at resume This is only relevant to implementations with multiple clusters, where clusters have separate clock lines but all CPUs within a cluster share it. Consider a dual cluster platform with 2 cores per cluster. During suspend we start hot unplugging CPUs in order 1 to 3. When CPU2 is removed, policy->kobj would be moved to CPU3 and when CPU3 goes down we wouldn't free policy or its kobj as we want to retain permissions/values/etc. Now on resume, we will get CPU2 before CPU3 and will call __cpufreq_add_dev(). We will recover the old policy and update policy->cpu from 3 to 2 from update_policy_cpu(). But the kobj is still tied to CPU3 and isn't moved to CPU2. We wouldn't create a link for CPU2, but would try that for CPU3 while bringing it online. Which will report errors as CPU3 already has kobj assigned to it. This bug got introduced with commit 42f921a, which overlooked this scenario. To fix this, lets move kobj to the new policy->cpu while bringing first CPU of a cluster back. Also do a WARN_ON() if kobject_move failed, as we would reach here only for the first CPU of a non-boot cluster. And we can't recover from this situation, if kobject_move() fails. Fixes: 42f921a6f10c (cpufreq: remove sysfs files for CPUs which failed to come back after resume) Cc: 3.13+ # 3.13+ Reported-and-tested-by: Bu Yitian Reported-by: Saravana Kannan Reviewed-by: Srivatsa S. Bhat Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 62259d2..6f02485 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1153,10 +1153,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) * the creation of a brand new one. So we need to perform this update * by invoking update_policy_cpu(). */ - if (recover_policy && cpu != policy->cpu) + if (recover_policy && cpu != policy->cpu) { update_policy_cpu(policy, cpu); - else + WARN_ON(kobject_move(&policy->kobj, &dev->kobj)); + } else { policy->cpu = cpu; + } cpumask_copy(policy->cpus, cpumask_of(cpu)); -- cgit v0.10.2 From 2b1987a9f1e6250c962ca13820d3c69817879266 Mon Sep 17 00:00:00 2001 From: Brian W Hart Date: Fri, 27 Jun 2014 16:09:39 -0500 Subject: cpufreq: make table sentinel macros unsigned to match use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 5eeaf1f18973 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*) moved function cpufreq_next_valid() to a public header. Warnings are now generated when objects including that header are built with -Wsign-compare (as an out-of-tree module might be): .../include/linux/cpufreq.h: In function ‘cpufreq_next_valid’: .../include/linux/cpufreq.h:519:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] while ((*pos)->frequency != CPUFREQ_TABLE_END) ^ .../include/linux/cpufreq.h:520:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID) ^ Constants CPUFREQ_ENTRY_INVALID and CPUFREQ_TABLE_END are signed, but are used with unsigned member 'frequency' of cpufreq_frequency_table. Update the macro definitions to be explicitly unsigned to match their use. This also corrects potentially wrong behavior of clk_rate_table_iter() if unsigned long is wider than usigned int. Fixes: 5eeaf1f18973 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*) Signed-off-by: Brian W Hart Reviewed-by: Simon Horman Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index ec4112d..8f8ae95 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -482,8 +482,8 @@ extern struct cpufreq_governor cpufreq_gov_conservative; *********************************************************************/ /* Special Values of .frequency field */ -#define CPUFREQ_ENTRY_INVALID ~0 -#define CPUFREQ_TABLE_END ~1 +#define CPUFREQ_ENTRY_INVALID ~0u +#define CPUFREQ_TABLE_END ~1u /* Special Values of .flags field */ #define CPUFREQ_BOOST_FREQ (1 << 0) -- cgit v0.10.2