From 6dccf9c508d5d773859df1cc2dce75c5b19e35a0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 12 Jul 2011 22:29:32 -0400 Subject: mrst_pmu: driver for Intel Moorestown Power Management Unit The Moorestown (MRST) Power Management Unit (PMU) driver directs the SOC power states in the "Langwell" south complex (SCU). It hooks pci_platform_pm_ops[] and thus observes all PCI ".set_state" requests. For devices in the SC, the pmu driver translates those PCI requests into the appropriate commands for the SCU. The PMU driver helps implement S0i3, a deep system idle power idle state. Entry into S0i3 is via cpuidle, just like regular processor c-states. S0i3 depends on pre-conditions including uni-processor, graphics off, and certain IO devices in the SC must be off. If those pre-conditions are met, then the PMU allows cpuidle to enter S0i3, otherwise such requests are demoted, either to Atom C4 or Atom C6. This driver is based on prototype work by Bruce Flemming, Illyas Mansoor, Rajeev D. Muralidhar, Vishwesh M. Rudramuni, Hari Seshadri and Sujith Thomas. The current driver also includes contributions from H. Peter Anvin, Arjan van de Ven, Kristen Accardi, and Yong Wang. Thanks for additional review feedback from Alan Cox and Randy Dunlap. Acked-by: Alan Cox Acked-by: H. Peter Anvin Signed-off-by: Len Brown diff --git a/MAINTAINERS b/MAINTAINERS index 187282d..d37b387 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3344,6 +3344,12 @@ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ F: drivers/net/ixgbevf/ +INTEL MRST PMU DRIVER +M: Len Brown +L: linux-pm@lists.linux-foundation.org +S: Supported +F: arch/x86/platform/mrst/pmu.* + INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT L: linux-wireless@vger.kernel.org S: Orphan diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index f61ccdd..1ea3877 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_X86_MRST) += mrst.o obj-$(CONFIG_X86_MRST) += vrtc.o obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o +obj-$(CONFIG_X86_MRST) += pmu.o diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c new file mode 100644 index 0000000..9281da7 --- /dev/null +++ b/arch/x86/platform/mrst/pmu.c @@ -0,0 +1,817 @@ +/* + * mrst/pmu.c - driver for MRST Power Management Unit + * + * Copyright (c) 2011, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pmu.h" + +#define IPCMSG_FW_REVISION 0xF4 + +struct mrst_device { + u16 pci_dev_num; /* DEBUG only */ + u16 lss; + u16 latest_request; + unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */ +}; + +/* + * comlete list of MRST PCI devices + */ +static struct mrst_device mrst_devs[] = { +/* 0 */ { 0x0800, LSS_SPI0 }, /* Moorestown SPI Ctrl 0 */ +/* 1 */ { 0x0801, LSS_SPI1 }, /* Moorestown SPI Ctrl 1 */ +/* 2 */ { 0x0802, LSS_I2C0 }, /* Moorestown I2C 0 */ +/* 3 */ { 0x0803, LSS_I2C1 }, /* Moorestown I2C 1 */ +/* 4 */ { 0x0804, LSS_I2C2 }, /* Moorestown I2C 2 */ +/* 5 */ { 0x0805, LSS_KBD }, /* Moorestown Keyboard Ctrl */ +/* 6 */ { 0x0806, LSS_USB_HC }, /* Moorestown USB Ctrl */ +/* 7 */ { 0x0807, LSS_SD_HC0 }, /* Moorestown SD Host Ctrl 0 */ +/* 8 */ { 0x0808, LSS_SD_HC1 }, /* Moorestown SD Host Ctrl 1 */ +/* 9 */ { 0x0809, LSS_NAND }, /* Moorestown NAND Ctrl */ +/* 10 */ { 0x080a, LSS_AUDIO }, /* Moorestown Audio Ctrl */ +/* 11 */ { 0x080b, LSS_IMAGING }, /* Moorestown ISP */ +/* 12 */ { 0x080c, LSS_SECURITY }, /* Moorestown Security Controller */ +/* 13 */ { 0x080d, LSS_DISPLAY }, /* Moorestown External Displays */ +/* 14 */ { 0x080e, 0 }, /* Moorestown SCU IPC */ +/* 15 */ { 0x080f, LSS_GPIO }, /* Moorestown GPIO Controller */ +/* 16 */ { 0x0810, 0 }, /* Moorestown Power Management Unit */ +/* 17 */ { 0x0811, LSS_USB_OTG }, /* Moorestown OTG Ctrl */ +/* 18 */ { 0x0812, LSS_SPI2 }, /* Moorestown SPI Ctrl 2 */ +/* 19 */ { 0x0813, 0 }, /* Moorestown SC DMA */ +/* 20 */ { 0x0814, LSS_AUDIO_LPE }, /* Moorestown LPE DMA */ +/* 21 */ { 0x0815, LSS_AUDIO_SSP }, /* Moorestown SSP0 */ + +/* 22 */ { 0x084F, LSS_SD_HC2 }, /* Moorestown SD Host Ctrl 2 */ + +/* 23 */ { 0x4102, 0 }, /* Lincroft */ +/* 24 */ { 0x4110, 0 }, /* Lincroft */ +}; + +/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */ +static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0}; +static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803, + 0x0804, 0x0805, 0x080f, 0}; + +/* handle concurrent SMP invokations of pmu_pci_set_power_state() */ +static spinlock_t mrst_pmu_power_state_lock; + +static unsigned int wake_counters[MRST_NUM_LSS]; /* DEBUG only */ +static unsigned int pmu_irq_stats[INT_INVALID + 1]; /* DEBUG only */ + +static int graphics_is_off; +static int lss_s0i3_enabled; +static bool mrst_pmu_s0i3_enable; + +/* debug counters */ +static u32 pmu_wait_ready_calls; +static u32 pmu_wait_ready_udelays; +static u32 pmu_wait_ready_udelays_max; +static u32 pmu_wait_done_calls; +static u32 pmu_wait_done_udelays; +static u32 pmu_wait_done_udelays_max; +static u32 pmu_set_power_state_entry; +static u32 pmu_set_power_state_send_cmd; + +static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num) +{ + int index = 0; + + if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815)) + index = pci_dev_num - 0x800; + else if (pci_dev_num == 0x084F) + index = 22; + else if (pci_dev_num == 0x4102) + index = 23; + else if (pci_dev_num == 0x4110) + index = 24; + + if (pci_dev_num != mrst_devs[index].pci_dev_num) { + WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num); + return 0; + } + + return &mrst_devs[index]; +} + +/** + * mrst_pmu_validate_cstates + * @dev: cpuidle_device + * + * Certain states are not appropriate for governor to pick in some cases. + * This function will be called as cpuidle_device's prepare callback and + * thus tells governor to ignore such states when selecting the next state + * to enter. + */ + +#define IDLE_STATE4_IS_C6 4 +#define IDLE_STATE5_IS_S0I3 5 + +int mrst_pmu_invalid_cstates(void) +{ + int cpu = smp_processor_id(); + + /* + * Demote to C4 if the PMU is busy. + * Since LSS changes leave the busy bit clear... + * busy means either the PMU is waiting for an ACK-C6 that + * isn't coming due to an MWAIT that returned immediately; + * or we returned from S0i3 successfully, and the PMU + * is not done sending us interrupts. + */ + if (pmu_read_busy_status()) + return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3; + + /* + * Disallow S0i3 if: PMU is not initialized, or CPU1 is active, + * or if device LSS is insufficient, or the GPU is active, + * or if it has been explicitly disabled. + */ + if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) || + !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable) + return 1 << IDLE_STATE5_IS_S0I3; + else + return 0; +} + +/* + * pmu_update_wake_counters(): read PM_WKS, update wake_counters[] + * DEBUG only. + */ +static void pmu_update_wake_counters(void) +{ + int lss; + u32 wake_status; + + wake_status = pmu_read_wks(); + + for (lss = 0; lss < MRST_NUM_LSS; ++lss) { + if (wake_status & (1 << lss)) + wake_counters[lss]++; + } +} + +int mrst_pmu_s0i3_entry(void) +{ + int status; + + /* Clear any possible error conditions */ + pmu_write_ics(0x300); + + /* set wake control to current D-states */ + pmu_write_wssc(S0I3_SSS_TARGET); + + status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd); + pmu_update_wake_counters(); + return status; +} + +/* poll for maximum of 5ms for busy bit to clear */ +static int pmu_wait_ready(void) +{ + int udelays; + + pmu_wait_ready_calls++; + + for (udelays = 0; udelays < 500; ++udelays) { + if (udelays > pmu_wait_ready_udelays_max) + pmu_wait_ready_udelays_max = udelays; + + if (pmu_read_busy_status() == 0) + return 0; + + udelay(10); + pmu_wait_ready_udelays++; + } + + /* + * if this fires, observe + * /sys/kernel/debug/mrst_pmu_wait_ready_calls + * /sys/kernel/debug/mrst_pmu_wait_ready_udelays + */ + WARN_ONCE(1, "SCU not ready for 5ms"); + return -EBUSY; +} +/* poll for maximum of 50ms us for busy bit to clear */ +static int pmu_wait_done(void) +{ + int udelays; + + pmu_wait_done_calls++; + + for (udelays = 0; udelays < 500; ++udelays) { + if (udelays > pmu_wait_done_udelays_max) + pmu_wait_done_udelays_max = udelays; + + if (pmu_read_busy_status() == 0) + return 0; + + udelay(100); + pmu_wait_done_udelays++; + } + + /* + * if this fires, observe + * /sys/kernel/debug/mrst_pmu_wait_done_calls + * /sys/kernel/debug/mrst_pmu_wait_done_udelays + */ + WARN_ONCE(1, "SCU not done for 50ms"); + return -EBUSY; +} + +u32 mrst_pmu_msi_is_disabled(void) +{ + return pmu_msi_is_disabled(); +} + +void mrst_pmu_enable_msi(void) +{ + pmu_msi_enable(); +} + +/** + * pmu_irq - pmu driver interrupt handler + * Context: interrupt context + */ +static irqreturn_t pmu_irq(int irq, void *dummy) +{ + union pmu_pm_ics pmu_ics; + + pmu_ics.value = pmu_read_ics(); + + if (!pmu_ics.bits.pending) + return IRQ_NONE; + + switch (pmu_ics.bits.cause) { + case INT_SPURIOUS: + case INT_CMD_DONE: + case INT_CMD_ERR: + case INT_WAKE_RX: + case INT_SS_ERROR: + case INT_S0IX_MISS: + case INT_NO_ACKC6: + pmu_irq_stats[pmu_ics.bits.cause]++; + break; + default: + pmu_irq_stats[INT_INVALID]++; + } + + pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */ + + return IRQ_HANDLED; +} + +/* + * Translate PCI power management to MRST LSS D-states + */ +static int pci_2_mrst_state(int lss, pci_power_t pci_state) +{ + switch (pci_state) { + case PCI_D0: + if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET) + return D0i1; + else + return D0; + case PCI_D1: + return D0i1; + case PCI_D2: + return D0i2; + case PCI_D3hot: + case PCI_D3cold: + return D0i3; + default: + WARN(1, "pci_state %d\n", pci_state); + return 0; + } +} + +static int pmu_issue_command(u32 pm_ssc) +{ + union pmu_pm_set_cfg_cmd_t command; + + if (pmu_read_busy_status()) { + pr_debug("pmu is busy, Operation not permitted\n"); + return -1; + } + + /* + * enable interrupts in PMU so that interrupts are + * propagated when ioc bit for a particular set + * command is set + */ + + pmu_irq_enable(); + + /* Configure the sub systems for pmu2 */ + + pmu_write_ssc(pm_ssc); + + /* + * Send the set config command for pmu its configured + * for mode CM_IMMEDIATE & hence with No Trigger + */ + + command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE; + command.pmu2_params.d_param.cfg_delay = 0; + command.pmu2_params.d_param.rsvd = 0; + + /* construct the command to send SET_CFG to particular PMU */ + command.pmu2_params.d_param.cmd = SET_CFG_CMD; + command.pmu2_params.d_param.ioc = 0; + command.pmu2_params.d_param.mode_id = 0; + command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0; + + /* write the value of PM_CMD into particular PMU */ + pr_debug("pmu command being written %x\n", + command.pmu_pm_set_cfg_cmd_value); + + pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value); + + return 0; +} + +static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state) +{ + u16 existing_request; + int i; + + for (i = 0; ids[i]; ++i) { + struct mrst_device *mrst_dev; + + mrst_dev = pci_id_2_mrst_dev(ids[i]); + if (unlikely(!mrst_dev)) + continue; + + existing_request = mrst_dev->latest_request; + if (existing_request < pci_state) + pci_state = existing_request; + } + return pci_state; +} + +/** + * pmu_pci_set_power_state - Callback function is used by all the PCI devices + * for a platform specific device power on/shutdown. + */ + +int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state) +{ + u32 old_sss, new_sss; + int status = 0; + struct mrst_device *mrst_dev; + + pmu_set_power_state_entry++; + + BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL); + BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold); + + mrst_dev = pci_id_2_mrst_dev(pdev->device); + if (unlikely(!mrst_dev)) + return -ENODEV; + + mrst_dev->pci_state_counts[pci_state]++; /* count invocations */ + + /* PMU driver calls self as part of PCI initialization, ignore */ + if (pdev->device == PCI_DEV_ID_MRST_PMU) + return 0; + + BUG_ON(!pmu_reg); /* SW bug if called before initialized */ + + spin_lock(&mrst_pmu_power_state_lock); + + if (pdev->d3_delay) { + dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n", + pdev->d3_delay); + pdev->d3_delay = 0; + } + /* + * If Lincroft graphics, simply remember state + */ + if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY + && !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) { + if (pci_state == PCI_D0) + graphics_is_off = 0; + else + graphics_is_off = 1; + goto ret; + } + + if (!mrst_dev->lss) + goto ret; /* device with no LSS */ + + if (mrst_dev->latest_request == pci_state) + goto ret; /* no change */ + + mrst_dev->latest_request = pci_state; /* record latest request */ + + /* + * LSS9 and LSS10 contain multiple PCI devices. + * Use the lowest numbered (highest power) state in the LSS + */ + if (mrst_dev->lss == 9) + pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state); + else if (mrst_dev->lss == 10) + pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state); + + status = pmu_wait_ready(); + if (status) + goto ret; + + old_sss = pmu_read_sss(); + new_sss = old_sss & ~SSMSK(3, mrst_dev->lss); + new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state), + mrst_dev->lss); + + if (new_sss == old_sss) + goto ret; /* nothing to do */ + + pmu_set_power_state_send_cmd++; + + status = pmu_issue_command(new_sss); + + if (unlikely(status != 0)) { + dev_err(&pdev->dev, "Failed to Issue a PM command\n"); + goto ret; + } + + if (pmu_wait_done()) + goto ret; + + lss_s0i3_enabled = + ((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET); +ret: + spin_unlock(&mrst_pmu_power_state_lock); + return status; +} + +#ifdef CONFIG_DEBUG_FS +static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"}; + +static inline const char *d0ix_name(int state) +{ + return d0ix_names[(int) state]; +} + +static int debug_mrst_pmu_show(struct seq_file *s, void *unused) +{ + struct pci_dev *pdev = NULL; + u32 cur_pmsss; + int lss; + + seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET); + + cur_pmsss = pmu_read_sss(); + + seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET); + + seq_printf(s, "0x%08X Current SSS ", cur_pmsss); + seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n"); + + if (cpumask_equal(cpu_online_mask, cpumask_of(0))) + seq_printf(s, "cpu0 is only cpu online\n"); + else + seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n"); + + seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]"); + + + for_each_pci_dev(pdev) { + int pos; + u16 pmcsr; + struct mrst_device *mrst_dev; + int i; + + mrst_dev = pci_id_2_mrst_dev(pdev->device); + + seq_printf(s, "%s %04x/%04X %-16.16s ", + dev_name(&pdev->dev), + pdev->vendor, pdev->device, + dev_driver_string(&pdev->dev)); + + if (unlikely (!mrst_dev)) { + seq_printf(s, " UNKNOWN\n"); + continue; + } + + if (mrst_dev->lss) + seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss, + d0ix_name(((cur_pmsss >> + (mrst_dev->lss * 2)) & 0x3))); + else + seq_printf(s, " "); + + /* PCI PM config space setting */ + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos != 0) { + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + seq_printf(s, "PCI-%-4s", + pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK)); + } else { + seq_printf(s, " "); + } + + seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request)); + for (i = 0; i <= PCI_D3cold; ++i) + seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]); + + if (mrst_dev->lss) { + unsigned int lssmask; + + lssmask = SSMSK(D0i3, mrst_dev->lss); + + if ((lssmask & S0I3_SSS_TARGET) && + ((lssmask & cur_pmsss) != + (lssmask & S0I3_SSS_TARGET))) + seq_printf(s , "[BLOCKS s0i3]"); + } + + seq_printf(s, "\n"); + } + seq_printf(s, "Wake Counters:\n"); + for (lss = 0; lss < MRST_NUM_LSS; ++lss) + seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]); + + seq_printf(s, "Interrupt Counters:\n"); + seq_printf(s, + "INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n" + "INT_CMD_ERR \t%8u\n" "INT_WAKE_RX \t%8u\n" + "INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n" + "INT_NO_ACKC6 \t%8u\n" "INT_INVALID \t%8u\n", + pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE], + pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX], + pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS], + pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]); + + seq_printf(s, "mrst_pmu_wait_ready_calls %8d\n", + pmu_wait_ready_calls); + seq_printf(s, "mrst_pmu_wait_ready_udelays %8d\n", + pmu_wait_ready_udelays); + seq_printf(s, "mrst_pmu_wait_ready_udelays_max %8d\n", + pmu_wait_ready_udelays_max); + seq_printf(s, "mrst_pmu_wait_done_calls %8d\n", + pmu_wait_done_calls); + seq_printf(s, "mrst_pmu_wait_done_udelays %8d\n", + pmu_wait_done_udelays); + seq_printf(s, "mrst_pmu_wait_done_udelays_max %8d\n", + pmu_wait_done_udelays_max); + seq_printf(s, "mrst_pmu_set_power_state_entry %8d\n", + pmu_set_power_state_entry); + seq_printf(s, "mrst_pmu_set_power_state_send_cmd %8d\n", + pmu_set_power_state_send_cmd); + seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status()); + + return 0; +} + +static int debug_mrst_pmu_open(struct inode *inode, struct file *file) +{ + return single_open(file, debug_mrst_pmu_show, NULL); +} + +static const struct file_operations devices_state_operations = { + .open = debug_mrst_pmu_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* DEBUG_FS */ + +/* + * Validate SCU PCI shim PCI vendor capability byte + * against LSS hard-coded in mrst_devs[] above. + * DEBUG only. + */ +static void pmu_scu_firmware_debug(void) +{ + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + struct mrst_device *mrst_dev; + u8 pci_config_lss; + int pos; + + mrst_dev = pci_id_2_mrst_dev(pdev->device); + if (unlikely(!mrst_dev)) { + printk(KERN_ERR FW_BUG "pmu: Unknown " + "PCI device 0x%04X\n", pdev->device); + continue; + } + + if (mrst_dev->lss == 0) + continue; /* no LSS in our table */ + + pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR); + if (!pos != 0) { + printk(KERN_ERR FW_BUG "pmu: 0x%04X " + "missing PCI Vendor Capability\n", + pdev->device); + continue; + } + pci_read_config_byte(pdev, pos + 4, &pci_config_lss); + if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) { + printk(KERN_ERR FW_BUG "pmu: 0x%04X " + "invalid PCI Vendor Capability 0x%x " + " expected LSS 0x%X\n", + pdev->device, pci_config_lss, mrst_dev->lss); + continue; + } + pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK; + + if (mrst_dev->lss == pci_config_lss) + continue; + + printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n", + pdev->device, pci_config_lss, mrst_dev->lss); + } +} + +/** + * pmu_probe + */ +static int __devinit pmu_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + int ret; + struct mrst_pmu_reg *pmu; + + /* Init the device */ + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "Unable to Enable PCI device\n"); + return ret; + } + + ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME); + if (ret < 0) { + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n"); + goto out_err1; + } + + /* Map the memory of PMU reg base */ + pmu = pci_iomap(pdev, 0, 0); + if (!pmu) { + dev_err(&pdev->dev, "Unable to map the PMU address space\n"); + ret = -ENOMEM; + goto out_err2; + } + +#ifdef CONFIG_DEBUG_FS + /* /sys/kernel/debug/mrst_pmu */ + (void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO, + NULL, NULL, &devices_state_operations); +#endif + pmu_reg = pmu; /* success */ + + if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) { + dev_err(&pdev->dev, "Registering isr has failed\n"); + ret = -1; + goto out_err3; + } + + pmu_scu_firmware_debug(); + + pmu_write_wkc(S0I3_WAKE_SOURCES); /* Enable S0i3 wakeup sources */ + + pmu_wait_ready(); + + pmu_write_ssc(D0I1_ACG_SSS_TARGET); /* Enable Auto-Clock_Gating */ + pmu_write_cmd(0x201); + + spin_lock_init(&mrst_pmu_power_state_lock); + + /* Enable the hardware interrupt */ + pmu_irq_enable(); + return 0; + +out_err3: + free_irq(pdev->irq, NULL); + pci_iounmap(pdev, pmu_reg); + pmu_reg = NULL; +out_err2: + pci_release_region(pdev, 0); +out_err1: + pci_disable_device(pdev); + return ret; +} + +static void __devexit pmu_remove(struct pci_dev *pdev) +{ + dev_err(&pdev->dev, "Mid PM pmu_remove called\n"); + + /* Freeing up the irq */ + free_irq(pdev->irq, NULL); + + pci_iounmap(pdev, pmu_reg); + pmu_reg = NULL; + + /* disable the current PCI device */ + pci_release_region(pdev, 0); + pci_disable_device(pdev); +} + +static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = { + { PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 }, + { } +}; + +MODULE_DEVICE_TABLE(pci, pmu_pci_ids); + +static struct pci_driver driver = { + .name = MRST_PMU_DRV_NAME, + .id_table = pmu_pci_ids, + .probe = pmu_probe, + .remove = __devexit_p(pmu_remove), +}; + +/** + * pmu_pci_register - register the PMU driver as PCI device + */ +static int __init pmu_pci_register(void) +{ + return pci_register_driver(&driver); +} + +/* Register and probe via fs_initcall() to preceed device_initcall() */ +fs_initcall(pmu_pci_register); + +static void __exit mid_pci_cleanup(void) +{ + pci_unregister_driver(&driver); +} + +static int ia_major; +static int ia_minor; + +static int pmu_sfi_parse_oem(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + + sb = (struct sfi_table_simple *)table; + ia_major = (sb->pentry[1] >> 0) & 0xFFFF; + ia_minor = (sb->pentry[1] >> 16) & 0xFFFF; + printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n", + ia_major, ia_minor); + + return 0; +} + +static int __init scu_fw_check(void) +{ + int ret; + u32 fw_version; + + if (!pmu_reg) + return 0; /* this driver didn't probe-out */ + + sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem); + + if (ia_major < 0x6005 || ia_minor < 0x1525) { + WARN(1, "mrst_pmu: IA FW version too old\n"); + return -1; + } + + ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0, + &fw_version, 1); + + if (ret) { + WARN(1, "mrst_pmu: IPC FW version? %d\n", ret); + } else { + int scu_major = (fw_version >> 8) & 0xFF; + int scu_minor = (fw_version >> 0) & 0xFF; + + printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version); + + if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) { + printk(KERN_INFO "mrst_pmu: enabling S0i3\n"); + mrst_pmu_s0i3_enable = true; + } else { + WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X", + scu_major, scu_minor); + } + } + return 0; +} +late_initcall(scu_fw_check); +module_exit(mid_pci_cleanup); diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h new file mode 100644 index 0000000..bfbfe64 --- /dev/null +++ b/arch/x86/platform/mrst/pmu.h @@ -0,0 +1,234 @@ +/* + * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c + * + * Copyright (c) 2011, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _MRST_PMU_H_ +#define _MRST_PMU_H_ + +#define PCI_DEV_ID_MRST_PMU 0x0810 +#define MRST_PMU_DRV_NAME "mrst_pmu" +#define PCI_SUB_CLASS_MASK 0xFF00 + +#define PCI_VENDOR_CAP_LOG_ID_MASK 0x7F +#define PCI_VENDOR_CAP_LOG_SS_MASK 0x80 + +#define SUB_SYS_ALL_D0I1 0x01155555 +#define S0I3_WAKE_SOURCES 0x00001FFF + +#define PM_S0I3_COMMAND \ + ((0 << 31) | /* Reserved */ \ + (0 << 30) | /* Core must be idle */ \ + (0xc2 << 22) | /* ACK C6 trigger */ \ + (3 << 19) | /* Trigger on DMI message */ \ + (3 << 16) | /* Enter S0i3 */ \ + (0 << 13) | /* Numeric mode ID (sw) */ \ + (3 << 9) | /* Trigger mode */ \ + (0 << 8) | /* Do not interrupt */ \ + (1 << 0)) /* Set configuration */ + +#define LSS_DMI 0 +#define LSS_SD_HC0 1 +#define LSS_SD_HC1 2 +#define LSS_NAND 3 +#define LSS_IMAGING 4 +#define LSS_SECURITY 5 +#define LSS_DISPLAY 6 +#define LSS_USB_HC 7 +#define LSS_USB_OTG 8 +#define LSS_AUDIO 9 +#define LSS_AUDIO_LPE 9 +#define LSS_AUDIO_SSP 9 +#define LSS_I2C0 10 +#define LSS_I2C1 10 +#define LSS_I2C2 10 +#define LSS_KBD 10 +#define LSS_SPI0 10 +#define LSS_SPI1 10 +#define LSS_SPI2 10 +#define LSS_GPIO 10 +#define LSS_SRAM 11 /* used by SCU, do not touch */ +#define LSS_SD_HC2 12 +/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */ +#define MRST_NUM_LSS 13 + +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) + +#define SSMSK(mask, lss) ((mask) << ((lss) * 2)) +#define D0 0 +#define D0i1 1 +#define D0i2 2 +#define D0i3 3 + +#define S0I3_SSS_TARGET ( \ + SSMSK(D0i1, LSS_DMI) | \ + SSMSK(D0i3, LSS_SD_HC0) | \ + SSMSK(D0i3, LSS_SD_HC1) | \ + SSMSK(D0i3, LSS_NAND) | \ + SSMSK(D0i3, LSS_SD_HC2) | \ + SSMSK(D0i3, LSS_IMAGING) | \ + SSMSK(D0i3, LSS_SECURITY) | \ + SSMSK(D0i3, LSS_DISPLAY) | \ + SSMSK(D0i3, LSS_USB_HC) | \ + SSMSK(D0i3, LSS_USB_OTG) | \ + SSMSK(D0i3, LSS_AUDIO) | \ + SSMSK(D0i1, LSS_I2C0)) + +/* + * D0i1 on Langwell is Autonomous Clock Gating (ACG). + * Enable ACG on every LSS except camera and audio + */ +#define D0I1_ACG_SSS_TARGET \ + (SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO)) + +enum cm_mode { + CM_NOP, /* ignore the config mode value */ + CM_IMMEDIATE, + CM_DELAY, + CM_TRIGGER, + CM_INVALID +}; + +enum sys_state { + SYS_STATE_S0I0, + SYS_STATE_S0I1, + SYS_STATE_S0I2, + SYS_STATE_S0I3, + SYS_STATE_S3, + SYS_STATE_S5 +}; + +#define SET_CFG_CMD 1 + +enum int_status { + INT_SPURIOUS = 0, + INT_CMD_DONE = 1, + INT_CMD_ERR = 2, + INT_WAKE_RX = 3, + INT_SS_ERROR = 4, + INT_S0IX_MISS = 5, + INT_NO_ACKC6 = 6, + INT_INVALID = 7, +}; + +/* PMU register interface */ +static struct mrst_pmu_reg { + u32 pm_sts; /* 0x00 */ + u32 pm_cmd; /* 0x04 */ + u32 pm_ics; /* 0x08 */ + u32 _resv1; /* 0x0C */ + u32 pm_wkc[2]; /* 0x10 */ + u32 pm_wks[2]; /* 0x18 */ + u32 pm_ssc[4]; /* 0x20 */ + u32 pm_sss[4]; /* 0x30 */ + u32 pm_wssc[4]; /* 0x40 */ + u32 pm_c3c4; /* 0x50 */ + u32 pm_c5c6; /* 0x54 */ + u32 pm_msi_disable; /* 0x58 */ +} *pmu_reg; + +static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); } +static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); } +static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); } +static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); } + +static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); } +static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); } +static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); } +static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); } +static inline void pmu_write_wssc(u32 arg) + { writel(arg, &pmu_reg->pm_wssc[0]); } + +static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); } +static inline u32 pmu_msi_is_disabled(void) + { return readl(&pmu_reg->pm_msi_disable); } + +union pmu_pm_ics { + struct { + u32 cause:8; + u32 enable:1; + u32 pending:1; + u32 reserved:22; + } bits; + u32 value; +}; + +static inline void pmu_irq_enable(void) +{ + union pmu_pm_ics pmu_ics; + + pmu_ics.value = pmu_read_ics(); + pmu_ics.bits.enable = 1; + pmu_write_ics(pmu_ics.value); +} + +union pmu_pm_status { + struct { + u32 pmu_rev:8; + u32 pmu_busy:1; + u32 mode_id:4; + u32 Reserved:19; + } pmu_status_parts; + u32 pmu_status_value; +}; + +static inline int pmu_read_busy_status(void) +{ + union pmu_pm_status result; + + result.pmu_status_value = pmu_read_sts(); + + return result.pmu_status_parts.pmu_busy; +} + +/* pmu set config parameters */ +struct cfg_delay_param_t { + u32 cmd:8; + u32 ioc:1; + u32 cfg_mode:4; + u32 mode_id:3; + u32 sys_state:3; + u32 cfg_delay:8; + u32 rsvd:5; +}; + +struct cfg_trig_param_t { + u32 cmd:8; + u32 ioc:1; + u32 cfg_mode:4; + u32 mode_id:3; + u32 sys_state:3; + u32 cfg_trig_type:3; + u32 cfg_trig_val:8; + u32 cmbi:1; + u32 rsvd1:1; +}; + +union pmu_pm_set_cfg_cmd_t { + union { + struct cfg_delay_param_t d_param; + struct cfg_trig_param_t t_param; + } pmu2_params; + u32 pmu_pm_set_cfg_cmd_value; +}; + +#ifdef FUTURE_PATCH +extern int mrst_s0i3_entry(u32 regval, u32 *regaddr); +#else +static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; } +#endif +#endif -- cgit v0.10.2 From 62027aea23fcd14478abdddd3b74a4e0f5fb2984 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 18:13:10 -0400 Subject: cpuidle: create bootparam "cpuidle.off=1" useful for disabling cpuidle to fall back to architecture-default idle loop cpuidle drivers and governors will fail to register. on x86 they'll say so: intel_idle: intel_idle yielding to (null) ACPI: acpi_idle yielding to (null) Signed-off-by: Len Brown diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index aa47be7..9b8e62d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -546,6 +546,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. /proc//coredump_filter. See also Documentation/filesystems/proc.txt. + cpuidle.off=1 [CPU_IDLE] + disable the cpuidle sub-system + cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: ,,,[,] diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index bf50924..faae2c3 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -28,6 +28,12 @@ LIST_HEAD(cpuidle_detected_devices); static void (*pm_idle_old)(void); static int enabled_devices; +static int off __read_mostly; + +int cpuidle_disabled(void) +{ + return off; +} #if defined(CONFIG_ARCH_HAS_CPU_IDLE_WAIT) static void cpuidle_kick_cpus(void) @@ -427,6 +433,9 @@ static int __init cpuidle_init(void) { int ret; + if (cpuidle_disabled()) + return -ENODEV; + pm_idle_old = pm_idle; ret = cpuidle_add_class_sysfs(&cpu_sysdev_class); @@ -438,4 +447,5 @@ static int __init cpuidle_init(void) return 0; } +module_param(off, int, 0444); core_initcall(cpuidle_init); diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h index 33e50d5..38c3fd8 100644 --- a/drivers/cpuidle/cpuidle.h +++ b/drivers/cpuidle/cpuidle.h @@ -13,6 +13,7 @@ extern struct list_head cpuidle_governors; extern struct list_head cpuidle_detected_devices; extern struct mutex cpuidle_lock; extern spinlock_t cpuidle_driver_lock; +extern int cpuidle_disabled(void); /* idle loop */ extern void cpuidle_install_idle_handler(void); diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index fd1601e..3f7e3ce 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -26,6 +26,9 @@ int cpuidle_register_driver(struct cpuidle_driver *drv) if (!drv) return -EINVAL; + if (cpuidle_disabled()) + return -ENODEV; + spin_lock(&cpuidle_driver_lock); if (cpuidle_curr_driver) { spin_unlock(&cpuidle_driver_lock); diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c index 724c164..ea2f8e7 100644 --- a/drivers/cpuidle/governor.c +++ b/drivers/cpuidle/governor.c @@ -81,6 +81,9 @@ int cpuidle_register_governor(struct cpuidle_governor *gov) if (!gov || !gov->select) return -EINVAL; + if (cpuidle_disabled()) + return -ENODEV; + mutex_lock(&cpuidle_lock); if (__cpuidle_find_governor(gov->name) == NULL) { ret = 0; -- cgit v0.10.2 From d91ee5863b71e8c90eaf6035bff3078a85e2e7b5 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 18:28:35 -0400 Subject: cpuidle: replace xen access to x86 pm_idle and default_idle When a Xen Dom0 kernel boots on a hypervisor, it gets access to the raw-hardware ACPI tables. While it parses the idle tables for the hypervisor's beneift, it uses HLT for its own idle. Rather than have xen scribble on pm_idle and access default_idle, have it simply disable_cpuidle() so acpi_idle will not load and architecture default HLT will be used. cc: xen-devel@lists.xensource.com Tested-by: Konrad Rzeszutek Wilk Acked-by: H. Peter Anvin Signed-off-by: Len Brown diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 60aeeb5..a9627e2 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -426,7 +427,7 @@ void __init xen_arch_setup(void) #ifdef CONFIG_X86_32 boot_cpu_data.hlt_works_ok = 1; #endif - pm_idle = default_idle; + disable_cpuidle(); boot_option_idle_override = IDLE_HALT; fiddle_vdso(); diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index faae2c3..041df0b 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -34,6 +34,10 @@ int cpuidle_disabled(void) { return off; } +void disable_cpuidle(void) +{ + off = 1; +} #if defined(CONFIG_ARCH_HAS_CPU_IDLE_WAIT) static void cpuidle_kick_cpus(void) diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 36719ea..b89f67d 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -122,6 +122,7 @@ struct cpuidle_driver { }; #ifdef CONFIG_CPU_IDLE +extern void disable_cpuidle(void); extern int cpuidle_register_driver(struct cpuidle_driver *drv); struct cpuidle_driver *cpuidle_get_driver(void); @@ -135,6 +136,7 @@ extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); #else +static inline void disable_cpuidle(void) { } static inline int cpuidle_register_driver(struct cpuidle_driver *drv) {return -ENODEV; } -- cgit v0.10.2 From 4bfc8288bc4a64529c5547d17349a2a1f4675507 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 30 Mar 2011 23:52:29 -0400 Subject: x86 idle: move mwait_idle_with_hints() to where it is used ...and make it static no functional change cc: x86@kernel.org Acked-by: H. Peter Anvin Signed-off-by: Len Brown diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 2193715..0d1171c 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -751,8 +751,6 @@ static inline void __sti_mwait(unsigned long eax, unsigned long ecx) :: "a" (eax), "c" (ecx)); } -extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); - extern void select_idle_routine(const struct cpuinfo_x86 *c); extern void init_amd_e400_c1e_mask(void); diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index 5812404..f50e7fb 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -149,6 +149,29 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu, } EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); +/* + * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, + * which can obviate IPI to trigger checking of need_resched. + * We execute MONITOR against need_resched and enter optimized wait state + * through MWAIT. Whenever someone changes need_resched, we would be woken + * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. + */ +void mwait_idle_with_hints(unsigned long ax, unsigned long cx) +{ + if (!need_resched()) { + if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) + clflush((void *)¤t_thread_info()->flags); + + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __mwait(ax, cx); + } +} + void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) { unsigned int cpu = smp_processor_id(); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index e1ba8cb2..e7e3b01 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -438,29 +438,6 @@ void cpu_idle_wait(void) } EXPORT_SYMBOL_GPL(cpu_idle_wait); -/* - * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, - * which can obviate IPI to trigger checking of need_resched. - * We execute MONITOR against need_resched and enter optimized wait state - * through MWAIT. Whenever someone changes need_resched, we would be woken - * up from MWAIT (without an IPI). - * - * New with Core Duo processors, MWAIT can take some hints based on CPU - * capability. - */ -void mwait_idle_with_hints(unsigned long ax, unsigned long cx) -{ - if (!need_resched()) { - if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) - clflush((void *)¤t_thread_info()->flags); - - __monitor((void *)¤t_thread_info()->flags, 0, 0); - smp_mb(); - if (!need_resched()) - __mwait(ax, cx); - } -} - /* Default MONITOR/MWAIT with no hints, used for default C1 state */ static void mwait_idle(void) { -- cgit v0.10.2 From a0bfa1373859e9d11dc92561a8667588803e42d8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 19:34:59 -0400 Subject: cpuidle: stop depending on pm_idle cpuidle users should call cpuidle_call_idle() directly rather than via (pm_idle)() function pointer. Architecture may choose to continue using (pm_idle)(), but cpuidle need not depend on it: my_arch_cpu_idle() ... if(cpuidle_call_idle()) pm_idle(); cc: Kevin Hilman cc: Paul Mundt cc: x86@kernel.org Acked-by: H. Peter Anvin Signed-off-by: Len Brown diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 5e1e541..d7ee0d4 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -196,7 +197,8 @@ void cpu_idle(void) cpu_relax(); } else { stop_critical_timings(); - pm_idle(); + if (cpuidle_call_idle()) + pm_idle(); start_critical_timings(); /* * This will eventually be removed - pm_idle diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 425d604..9c7099e 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -16,12 +16,13 @@ #include #include #include +#include #include #include #include #include -void (*pm_idle)(void) = NULL; +static void (*pm_idle)(void); static int hlt_counter; @@ -100,7 +101,8 @@ void cpu_idle(void) local_irq_disable(); /* Don't trace irqs off for idle */ stop_critical_timings(); - pm_idle(); + if (cpuidle_call_idle()) + pm_idle(); /* * Sanity check to ensure that pm_idle() returns * with IRQs enabled diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index a3d0dc5..7a3b651 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -109,7 +110,8 @@ void cpu_idle(void) local_irq_disable(); /* Don't trace irqs off for idle */ stop_critical_timings(); - pm_idle(); + if (cpuidle_idle_call()) + pm_idle(); start_critical_timings(); } tick_nohz_restart_sched_tick(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ca6f7ab..f693e44 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -136,7 +137,8 @@ void cpu_idle(void) enter_idle(); /* Don't trace irqs off for idle */ stop_critical_timings(); - pm_idle(); + if (cpuidle_idle_call()) + pm_idle(); start_critical_timings(); /* In many cases the interrupt that ended idle diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 041df0b..d4c5423 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -25,10 +25,10 @@ DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices); DEFINE_MUTEX(cpuidle_lock); LIST_HEAD(cpuidle_detected_devices); -static void (*pm_idle_old)(void); static int enabled_devices; static int off __read_mostly; +static int initialized __read_mostly; int cpuidle_disabled(void) { @@ -56,25 +56,23 @@ static int __cpuidle_register_device(struct cpuidle_device *dev); * cpuidle_idle_call - the main idle loop * * NOTE: no locks or semaphores should be used here + * return non-zero on failure */ -static void cpuidle_idle_call(void) +int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_state *target_state; int next_state; + if (off) + return -ENODEV; + + if (!initialized) + return -ENODEV; + /* check if the device is ready */ - if (!dev || !dev->enabled) { - if (pm_idle_old) - pm_idle_old(); - else -#if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE) - default_idle(); -#else - local_irq_enable(); -#endif - return; - } + if (!dev || !dev->enabled) + return -EBUSY; #if 0 /* shows regressions, re-enable for 2.6.29 */ @@ -99,7 +97,7 @@ static void cpuidle_idle_call(void) next_state = cpuidle_curr_governor->select(dev); if (need_resched()) { local_irq_enable(); - return; + return 0; } target_state = &dev->states[next_state]; @@ -124,6 +122,8 @@ static void cpuidle_idle_call(void) /* give the governor an opportunity to reflect on the outcome */ if (cpuidle_curr_governor->reflect) cpuidle_curr_governor->reflect(dev); + + return 0; } /** @@ -131,10 +131,10 @@ static void cpuidle_idle_call(void) */ void cpuidle_install_idle_handler(void) { - if (enabled_devices && (pm_idle != cpuidle_idle_call)) { + if (enabled_devices) { /* Make sure all changes finished before we switch to new idle */ smp_wmb(); - pm_idle = cpuidle_idle_call; + initialized = 1; } } @@ -143,8 +143,8 @@ void cpuidle_install_idle_handler(void) */ void cpuidle_uninstall_idle_handler(void) { - if (enabled_devices && pm_idle_old && (pm_idle != pm_idle_old)) { - pm_idle = pm_idle_old; + if (enabled_devices) { + initialized = 0; cpuidle_kick_cpus(); } } @@ -440,8 +440,6 @@ static int __init cpuidle_init(void) if (cpuidle_disabled()) return -ENODEV; - pm_idle_old = pm_idle; - ret = cpuidle_add_class_sysfs(&cpu_sysdev_class); if (ret) return ret; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index b89f67d..b51629e 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -123,6 +123,7 @@ struct cpuidle_driver { #ifdef CONFIG_CPU_IDLE extern void disable_cpuidle(void); +extern int cpuidle_idle_call(void); extern int cpuidle_register_driver(struct cpuidle_driver *drv); struct cpuidle_driver *cpuidle_get_driver(void); @@ -137,6 +138,7 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev); #else static inline void disable_cpuidle(void) { } +static inline int cpuidle_idle_call(void) { return -ENODEV; } static inline int cpuidle_register_driver(struct cpuidle_driver *drv) {return -ENODEV; } -- cgit v0.10.2