From 71005be40a7fc95edda3cc462361ce0243e4f5fa Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Thu, 26 May 2011 21:31:08 +0100
Subject: libertas: Set command sequence number later to ensure consistency

Before this patch, the command sequence number is being set before
lbs_queue_cmd() adds the command to the queue. However, lbs_queue_cmd()
sometimes forces commands to queue-jump (e.g. CMD_802_11_WAKEUP_CONFIRM).
It currently does this without considering that sequence numbers might need
adjusting to keep things running in order.

Fix this by setting the sequence number at a later stage, just before
we're actually submitting the command to the hardware. Also fixes a
possible race where seqnum was being modified outside of the driver
lock.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 84566db..71c8f3f 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv,
 	cmd = cmdnode->cmdbuf;
 
 	spin_lock_irqsave(&priv->driver_lock, flags);
+	priv->seqnum++;
+	cmd->seqnum = cpu_to_le16(priv->seqnum);
 	priv->cur_cmd = cmdnode;
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
 
@@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
 	/* Copy the incoming command to the buffer */
 	memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
 
-	/* Set sequence number, clean result, move to buffer */
-	priv->seqnum++;
+	/* Set command, clean result, move to buffer */
 	cmdnode->cmdbuf->command = cpu_to_le16(command);
 	cmdnode->cmdbuf->size    = cpu_to_le16(in_cmd_size);
-	cmdnode->cmdbuf->seqnum  = cpu_to_le16(priv->seqnum);
 	cmdnode->cmdbuf->result  = 0;
 
 	lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
-- 
cgit v0.10.2


From dd08682150e1815fe5cdd0673a2f2e9cd2d55a7a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 27 May 2011 15:34:45 +0300
Subject: wl12xx: fix passive and radar channel generation for scheduled scan

We were comparing bitwise AND results with a boolean, so when the
boolean was set to true, it was not matching as it should.

Fix this by booleanizing the bitwise AND results with !!.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index f37e5a3..f223e0e 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -338,8 +338,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 		flags = req->channels[i]->flags;
 
 		if (!(flags & IEEE80211_CHAN_DISABLED) &&
-		    ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
-		    ((flags & IEEE80211_CHAN_RADAR) == radar) &&
+		    (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
+		    (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
 		    (req->channels[i]->band == band)) {
 			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
 				     req->channels[i]->band,
-- 
cgit v0.10.2


From 2497a246e880d1fb537f754f551177c01fa39242 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 27 May 2011 15:34:46 +0300
Subject: wl12xx: fix DFS channels handling in scheduled scan

DFS channels were never getting included in the scheduled scans,
because they always contain the passive flag as well and the call was
asking for DFS and active channels.

Fix this by ignoring the passive flag when collecting DFS channels.
Also, move the DFS channels in the channel list before the 5GHz active
channels (this was implemented in the FW differently than specified).

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index f223e0e..8ccbb91 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -337,10 +337,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 	     i++) {
 		flags = req->channels[i]->flags;
 
-		if (!(flags & IEEE80211_CHAN_DISABLED) &&
-		    (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
+		if ((req->channels[i]->band == band) &&
+		    !(flags & IEEE80211_CHAN_DISABLED) &&
 		    (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
-		    (req->channels[i]->band == band)) {
+		    /* if radar is set, we ignore the passive flag */
+		    (radar ||
+		     !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
 			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
 				     req->channels[i]->band,
 				     req->channels[i]->center_freq);
@@ -350,6 +352,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 			wl1271_debug(DEBUG_SCAN, "max_power %d",
 				     req->channels[i]->max_power);
 
+			if (flags & IEEE80211_CHAN_RADAR)
+				channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
 			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 				channels[j].passive_duration =
 					cpu_to_le16(c->dwell_time_passive);
@@ -359,7 +363,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 				channels[j].max_duration =
 					cpu_to_le16(c->max_dwell_time_active);
 			}
-			channels[j].tx_power_att = req->channels[j]->max_power;
+			channels[j].tx_power_att = req->channels[i]->max_power;
 			channels[j].channel = req->channels[i]->hw_value;
 
 			j++;
@@ -386,7 +390,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_2GHZ,
 						    false, false, idx);
-	idx += cfg->active[0];
+	/*
+	 * 5GHz channels always start at position 14, not immediately
+	 * after the last 2.4GHz channel
+	 */
+	idx = 14;
 
 	cfg->passive[1] =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
@@ -394,22 +402,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
 						    false, true, idx);
 	idx += cfg->passive[1];
 
-	cfg->active[1] =
+	cfg->dfs =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
-						    false, false, 14);
-	idx += cfg->active[1];
+						    true, true, idx);
+	idx += cfg->dfs;
 
-	cfg->dfs =
+	cfg->active[1] =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
-						    true, false, idx);
-	idx += cfg->dfs;
+						    false, false, idx);
+	idx += cfg->active[1];
 
 	wl1271_debug(DEBUG_SCAN, "    2.4GHz: active %d passive %d",
 		     cfg->active[0], cfg->passive[0]);
 	wl1271_debug(DEBUG_SCAN, "    5GHz: active %d passive %d",
 		     cfg->active[1], cfg->passive[1]);
+	wl1271_debug(DEBUG_SCAN, "    DFS: %d", cfg->dfs);
 
 	return idx;
 }
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index c833195..a0b6c5d 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -137,6 +137,9 @@ enum {
 	SCAN_BSS_TYPE_ANY,
 };
 
+#define SCAN_CHANNEL_FLAGS_DFS		BIT(0)
+#define SCAN_CHANNEL_FLAGS_DFS_ENABLED	BIT(1)
+
 struct conn_scan_ch_params {
 	__le16 min_duration;
 	__le16 max_duration;
-- 
cgit v0.10.2


From 50a66d7f04adbfab9db55144c58dc693358cb635 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 27 May 2011 15:34:47 +0300
Subject: wl12xx: add separate config value for DFS dwell time on sched scan

Use a different value for DFS dwell time when performing a scheduled
scan.  Previously we were using the same value as for normal passive
scans.  This adds some flexibility between these two different types
of passive scan.

For now we use 150 TUs for DFS channel dwell time.  This may need to
be fine-tuned in the future.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 1ab6c86..c83fefb 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings {
 	/* time to wait on the channel for passive scans (in TUs) */
 	u32 dwell_time_passive;
 
+	/* time to wait on the channel for DFS scans (in TUs) */
+	u32 dwell_time_dfs;
+
 	/* number of probe requests to send on each channel in active scans */
 	u8 num_probe_reqs;
 
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index bc00e52..e6497dc 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = {
 		.min_dwell_time_active = 8,
 		.max_dwell_time_active = 30,
 		.dwell_time_passive    = 100,
+		.dwell_time_dfs        = 150,
 		.num_probe_reqs        = 2,
 		.rssi_threshold        = -90,
 		.snr_threshold         = 0,
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 8ccbb91..28ec0ad 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -352,9 +352,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 			wl1271_debug(DEBUG_SCAN, "max_power %d",
 				     req->channels[i]->max_power);
 
-			if (flags & IEEE80211_CHAN_RADAR)
+			if (flags & IEEE80211_CHAN_RADAR) {
 				channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
-			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+				channels[j].passive_duration =
+					cpu_to_le16(c->dwell_time_dfs);
+			}
+			else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 				channels[j].passive_duration =
 					cpu_to_le16(c->dwell_time_passive);
 			} else {
-- 
cgit v0.10.2


From 66870b1ccd5c1460e437c18b0026e2dcaab1ece9 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 27 May 2011 15:34:48 +0300
Subject: wl12xx: fix oops in sched_scan when forcing a passive scan

Fix kernel oops when trying to use passive scheduled scans.  The
reason was that in passive scans there are no SSIDs, so there was a
NULL pointer dereference.

To solve the problem, we now check the number of SSIDs provided in the
sched_scan request and only access the list if there's one or more
(ie. passive scan is not forced).  We also force all the channels to
be passive by adding the IEEE80211_CHAN_PASSIVE_SCAN flag locally
before the checks in the wl1271_scan_get_sched_scan_channels()
function.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 28ec0ad..56f76ab 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -331,12 +331,16 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, j;
 	u32 flags;
+	bool force_passive = !req->n_ssids;
 
 	for (i = 0, j = start;
 	     i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
 	     i++) {
 		flags = req->channels[i]->flags;
 
+		if (force_passive)
+			flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
 		if ((req->channels[i]->band == band) &&
 		    !(flags & IEEE80211_CHAN_DISABLED) &&
 		    (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
@@ -433,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	struct wl1271_cmd_sched_scan_config *cfg = NULL;
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, total_channels, ret;
+	bool force_passive = !req->n_ssids;
 
 	wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
 
@@ -456,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
 		cfg->intervals[i] = cpu_to_le32(req->interval);
 
-	if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+	if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
 		cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
 		cfg->ssid_len = req->ssids[0].ssid_len;
 		memcpy(cfg->ssid, req->ssids[0].ssid,
@@ -473,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 		goto out;
 	}
 
-	if (cfg->active[0]) {
+	if (!force_passive && cfg->active[0]) {
 		ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_2GHZ],
@@ -485,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 		}
 	}
 
-	if (cfg->active[1]) {
+	if (!force_passive && cfg->active[1]) {
 		ret = wl1271_cmd_build_probe_req(wl,  req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_5GHZ],
-- 
cgit v0.10.2


From 59342f6a6bc35df623fb44784daa5e1077063b8f Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Mon, 30 May 2011 10:15:47 +0300
Subject: zd1211rw: fix to work on OHCI

zd1211 devices register 'EP 4 OUT' endpoint as Interrupt type on USB 2.0:

      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1

However on USB 1.1 endpoint becomes Bulk:

      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0

Commit 37939810b937aba830dd751291fcdc51cae1a6cb assumed that endpoint is
always interrupt type and changed usb_bulk_msg() calls to usb_interrupt_msg().

Problem here is that usb_bulk_msg() on interrupt endpoint selfcorrects the
call and changes requested pipe to interrupt type (see usb_bulk_msg).
However with usb_interrupt_msg() on bulk endpoint does not correct the
pipe type to bulk, but instead URB is submitted with interrupt type pipe.

So pre-2.6.39 used usb_bulk_msg() and therefore worked with both endpoint
types, however in 2.6.39 usb_interrupt_msg() with bulk endpoint causes
ohci_hcd to fail submitted URB instantly with -ENOSPC and preventing zd1211rw
from working with OHCI.

Fix this by detecting endpoint type and using correct endpoint/pipe types
for URB. Also fix asynchronous zd_usb_iowrite16v_async() to use right
URB type on 'EP 4 OUT'.

Cc: stable@kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 0e81994..631194d 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
 module_init(usb_init);
 module_exit(usb_exit);
 
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+			      int *actual_length, int timeout)
+{
+	/* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+	 * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+	 * descriptor.
+	 */
+	struct usb_host_endpoint *ep;
+	unsigned int pipe;
+
+	pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+	ep = usb_pipe_endpoint(udev, pipe);
+	if (!ep)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_int(&ep->desc)) {
+		return usb_interrupt_msg(udev, pipe, data, len,
+					 actual_length, timeout);
+	} else {
+		pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+		return usb_bulk_msg(udev, pipe, data, len, actual_length,
+				    timeout);
+	}
+}
+
 static int usb_int_regs_length(unsigned int count)
 {
 	return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
 
 	udev = zd_usb_to_usbdev(usb);
 	prepare_read_regs_int(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto error;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;
@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
 		rw->value = cpu_to_le16(ioreqs[i].value);
 	}
 
-	usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			 req, req_len, iowrite16v_urb_complete, usb,
-			 ep->desc.bInterval);
+	/* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+	 * endpoint is bulk. Select correct type URB by endpoint descriptor.
+	 */
+	if (usb_endpoint_xfer_int(&ep->desc))
+		usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+				 req, req_len, iowrite16v_urb_complete, usb,
+				 ep->desc.bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+				  req, req_len, iowrite16v_urb_complete, usb);
+
 	urb->transfer_flags |= URB_FREE_BUFFER;
 
 	/* Submit previous URB */
@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
 	}
 
 	udev = zd_usb_to_usbdev(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto out;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;
-- 
cgit v0.10.2


From 1144181c1bc054dc5e001a6f10b4820167e6c883 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Mon, 30 May 2011 09:32:52 -0700
Subject: iwlagn: fix incorrect PCI subsystem id for 6150 devices

For 6150 devices, modify the supported PCI subsystem ID.

Cc: stable@kernel.org
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index f8c710d..fda6fe0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	IWL_DEVICE_6050,
 };
 
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.ops = &iwl6150_ops,					\
+	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
 struct iwl_cfg iwl6150_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
-	.ops = &iwl6150_ops,
-	.base_params = &iwl6050_base_params,
+	IWL_DEVICE_6150,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 11c6c11..a662adc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 
 /* 6150 WiFi/WiMax Series */
 	{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
 
 /* 1000 Series WiFi */
 	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index 2495fe7..d171684 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg;
 extern struct iwl_cfg iwl6050_2agn_cfg;
 extern struct iwl_cfg iwl6050_2abg_cfg;
 extern struct iwl_cfg iwl6150_bgn_cfg;
+extern struct iwl_cfg iwl6150_bg_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
 extern struct iwl_cfg iwl1000_bg_cfg;
 extern struct iwl_cfg iwl100_bgn_cfg;
-- 
cgit v0.10.2


From 333ba7325213f0a09dfa5ceeddb056d6ad74b3b5 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 29 May 2011 15:53:20 +0300
Subject: cfg80211: don't drop p2p probe responses

Commit 0a35d36 ("cfg80211: Use capability info to detect mesh beacons")
assumed that probe response with both ESS and IBSS bits cleared
means that the frame was sent by a mesh sta.

However, these capabilities are also being used in the p2p_find phase,
and the mesh-validation broke it.

Rename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies
exist before assuming this frame was sent by a mesh sta.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b2eee58..bf56b6f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1003,8 +1003,12 @@ struct ieee80211_ht_info {
 #define WLAN_CAPABILITY_ESS		(1<<0)
 #define WLAN_CAPABILITY_IBSS		(1<<1)
 
-/* A mesh STA sets the ESS and IBSS capability bits to zero */
-#define WLAN_CAPABILITY_IS_MBSS(cap)	\
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
 	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
 
 #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 73a441d..7a6c676 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -267,13 +267,35 @@ static bool is_bss(struct cfg80211_bss *a,
 	return memcmp(ssidie + 2, ssid, ssid_len) == 0;
 }
 
+static bool is_mesh_bss(struct cfg80211_bss *a)
+{
+	const u8 *ie;
+
+	if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
+		return false;
+
+	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+			      a->information_elements,
+			      a->len_information_elements);
+	if (!ie)
+		return false;
+
+	ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+			      a->information_elements,
+			      a->len_information_elements);
+	if (!ie)
+		return false;
+
+	return true;
+}
+
 static bool is_mesh(struct cfg80211_bss *a,
 		    const u8 *meshid, size_t meshidlen,
 		    const u8 *meshcfg)
 {
 	const u8 *ie;
 
-	if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
+	if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
 		return false;
 
 	ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -311,7 +333,7 @@ static int cmp_bss(struct cfg80211_bss *a,
 	if (a->channel != b->channel)
 		return b->channel->center_freq - a->channel->center_freq;
 
-	if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
+	if (is_mesh_bss(a) && is_mesh_bss(b)) {
 		r = cmp_ies(WLAN_EID_MESH_ID,
 			    a->information_elements,
 			    a->len_information_elements,
@@ -457,7 +479,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 		    struct cfg80211_internal_bss *res)
 {
 	struct cfg80211_internal_bss *found = NULL;
-	const u8 *meshid, *meshcfg;
 
 	/*
 	 * The reference to "res" is donated to this function.
@@ -470,22 +491,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 
 	res->ts = jiffies;
 
-	if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
-		/* must be mesh, verify */
-		meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
-					  res->pub.information_elements,
-					  res->pub.len_information_elements);
-		meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
-					   res->pub.information_elements,
-					   res->pub.len_information_elements);
-		if (!meshid || !meshcfg ||
-		    meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
-			/* bogus mesh */
-			kref_put(&res->ref, bss_release);
-			return NULL;
-		}
-	}
-
 	spin_lock_bh(&dev->bss_lock);
 
 	found = rb_find_bss(dev, res);
-- 
cgit v0.10.2


From 21fdc87248d1d28492c775e05fa92b3c8c7bc8db Mon Sep 17 00:00:00 2001
From: Daniel Halperin <dhalperi@cs.washington.edu>
Date: Tue, 31 May 2011 11:59:30 -0700
Subject: ath9k: fix two more bugs in tx power

This is the same fix as

   commit 841051602e3fa18ea468fe5a177aa92b6eb44b56
   Author: Matteo Croce <technoboy85@gmail.com>
   Date:   Fri Dec 3 02:25:08 2010 +0100

   The ath9k driver subtracts 3 dBm to the txpower as with two radios the
   signal power is doubled.
   The resulting value is assigned in an u16 which overflows and makes
   the card work at full power.

in two more places. I grepped the ath tree and didn't find any others.

Cc: stable@kernel.org
Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 0ca7635..ff8150e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 7856f0d..343fc9f 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 	scaledPower = max((u16)0, scaledPower);
-- 
cgit v0.10.2


From a7567b2059020bf3fa96c389ec25eed8e28ad4ba Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 1 Jun 2011 08:29:54 +0200
Subject: bluetooth l2cap: fix locking in l2cap_global_chan_by_psm

read_lock() ... read_unlock_bh() is clearly bogus.
This was broken by

commit 23691d75cdc69c3b285211b4d77746aa20a17d18
Author: Gustavo F. Padovan <padovan@profusion.mobi>
Date:   Wed Apr 27 18:26:32 2011 -0300

    Bluetooth: Remove l2cap_sk_list

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a86f9ba..e64a1c2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -906,7 +906,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr
 		if (c->psm == psm) {
 			/* Exact match. */
 			if (!bacmp(&bt_sk(sk)->src, src)) {
-				read_unlock_bh(&chan_list_lock);
+				read_unlock(&chan_list_lock);
 				return c;
 			}
 
-- 
cgit v0.10.2


From dfe21582ac5ebc460dda98c67e8589dd506d02cd Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 1 Jun 2011 17:17:57 +0200
Subject: iwl4965: correctly validate temperature value

In some cases we can read wrong temperature value. If after that
temperature value will not be updated to good one, we badly configure
tx power parameters and device is unable to send a data.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=35932

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index f5433c7..f9db25b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv)
 	s32 temp;
 
 	temp = iwl4965_hw_get_temperature(priv);
-	if (temp < 0)
+	if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
 		return;
 
 	if (priv->temperature != temp) {
-- 
cgit v0.10.2


From bdf492f502ad4f646e9905db1b89e11822826edd Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 1 Jun 2011 11:01:11 +0200
Subject: ssb: fix PCI(e) driver regression causing oops on PCI cards
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We were incorrectly executing PCIe specific workarounds on PCI cards.
This resulted in:
Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 82feb34..2a20dab 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -539,10 +539,12 @@ void ssb_pcicore_init(struct ssb_pcicore *pc)
 	if (!pc->hostmode)
 		ssb_pcicore_init_clientmode(pc);
 
-	/* Additional always once-executed workarounds */
-	ssb_pcicore_serdes_workaround(pc);
-	/* TODO: ASPM */
-	/* TODO: Clock Request Update */
+	/* Additional PCIe always once-executed workarounds */
+	if (dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
-- 
cgit v0.10.2


From a99168eece601d2a79ecfcb968ce226f2f30cf98 Mon Sep 17 00:00:00 2001
From: Nick Kossifidis <mickflemm@gmail.com>
Date: Thu, 2 Jun 2011 03:09:48 +0300
Subject: ath5k: Disable fast channel switching by default

Disable fast channel change by default on AR2413/AR5413 due to
some bug reports (it still works for me but it's better to be safe).
Add a module parameter "fastchanswitch" in case anyone wants to enable
it and play with it.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2204762..b6c5d37 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -72,6 +72,11 @@ static int modparam_all_channels;
 module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
 MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
 
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
 /* Module info */
 MODULE_AUTHOR("Jiri Slaby");
 MODULE_AUTHOR("Nick Kossifidis");
@@ -2686,6 +2691,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
 	struct ath5k_hw *ah = sc->ah;
 	struct ath_common *common = ath5k_hw_common(ah);
 	int ret, ani_mode;
+	bool fast;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
@@ -2705,7 +2711,10 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
 	ath5k_drain_tx_buffs(sc);
 	if (chan)
 		sc->curchan = chan;
-	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+	fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
 								skip_pcu);
 	if (ret) {
 		ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 3510de2..126a4ea 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1124,8 +1124,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			/* Non fatal, can happen eg.
 			 * on mode change */
 			ret = 0;
-		} else
+		} else {
+			ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+				"fast chan change successful\n");
 			return 0;
+		}
 	}
 
 	/*
-- 
cgit v0.10.2


From 6f213ff1919fab6f8244ceae55631b5d6ef750a7 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Thu, 2 Jun 2011 18:17:15 +0200
Subject: iwlagn: fix channel switch locking

We use priv->mutex to avoid race conditions between iwl_chswitch_done()
and iwlagn_mac_channel_switch(), when marking channel switch in
progress. But iwl_chswitch_done() can be called in atomic context
from iwl_rx_csa() or with mutex already taken from iwlagn_commit_rxon().

These bugs were introduced by:

commit 79d07325502e73508f917475bc1617b60979dd94
Author: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date:   Thu May 6 08:54:11 2010 -0700

    iwlwifi: support channel switch offload in driver

To fix remove mutex from iwl_chswitch_done() and use atomic bitops for
marking channel switch pending.

Also remove iwl2030_hw_channel_switch() since 2000 series adapters are
2.4GHz only devices.

Cc: stable@kernel.org # 2.6.36+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index 86feec8..2282279 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -177,79 +177,6 @@ static int iwl2000_hw_set_hw_params(struct iwl_priv *priv)
 	return 0;
 }
 
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
-                                    struct ieee80211_channel_switch *ch_switch)
-{
-	/*
-	 * MULTI-FIXME
-	 * See iwl_mac_channel_switch.
-	 */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl6000_channel_switch_cmd cmd;
-	const struct iwl_channel_info *ch_info;
-	u32 switch_time_in_usec, ucode_switch_time;
-	u16 ch;
-	u32 tsf_low;
-	u8 switch_count;
-	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
-	struct ieee80211_vif *vif = ctx->vif;
-	struct iwl_host_cmd hcmd = {
-		.id = REPLY_CHANNEL_SWITCH,
-		.len = { sizeof(cmd), },
-		.flags = CMD_SYNC,
-		.data = { &cmd, },
-	};
-
-	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
-	ch = ch_switch->channel->hw_value;
-	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
-		ctx->active.channel, ch);
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
-	switch_count = ch_switch->count;
-	tsf_low = ch_switch->timestamp & 0x0ffffffff;
-	/*
-	 * calculate the ucode channel switch time
-	 * adding TSF as one of the factor for when to switch
-	 */
-	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
-		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
-		    beacon_interval)) {
-			switch_count -= (priv->ucode_beacon_time -
-				tsf_low) / beacon_interval;
-		} else
-			switch_count = 0;
-	}
-	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
-	else {
-		switch_time_in_usec =
-			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
-		ucode_switch_time = iwl_usecs_to_beacons(priv,
-						switch_time_in_usec,
-						beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						priv->ucode_beacon_time,
-						ucode_switch_time,
-						beacon_interval);
-	}
-	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	ch_info = iwl_get_channel_info(priv, priv->band, ch);
-	if (ch_info)
-		cmd.expect_beacon = is_channel_radar(ch_info);
-	else {
-		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
-			ctx->active.channel, ch);
-		return -EFAULT;
-	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
-
-	return iwl_send_cmd_sync(priv, &hcmd);
-}
-
 static struct iwl_lib_ops iwl2000_lib = {
 	.set_hw_params = iwl2000_hw_set_hw_params,
 	.rx_handler_setup = iwlagn_rx_handler_setup,
@@ -258,7 +185,6 @@ static struct iwl_lib_ops iwl2000_lib = {
 	.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 	.send_tx_power = iwlagn_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
-	.set_channel_switch = iwl2030_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
 		.config = iwl2000_nic_config,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index a70b8cf..5b721c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -331,8 +331,6 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
 			ctx->active.channel, ch);
 		return -EFAULT;
 	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
 
 	return iwl_send_cmd_sync(priv, &hcmd);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index fda6fe0..fbe565c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -270,8 +270,6 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 			ctx->active.channel, ch);
 		return -EFAULT;
 	}
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
 
 	return iwl_send_cmd_sync(priv, &hcmd);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index a95ad84..2532c7d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -342,10 +342,10 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	 * receive commit_rxon request
 	 * abort any previous channel switch if still in process
 	 */
-	if (priv->switch_rxon.switch_in_progress &&
-	    (priv->switch_rxon.channel != ctx->staging.channel)) {
+	if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+	    (priv->switch_channel != ctx->staging.channel)) {
 		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
-		      le16_to_cpu(priv->switch_rxon.channel));
+			      le16_to_cpu(priv->switch_channel));
 		iwl_chswitch_done(priv, false);
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a662adc..8e1942e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2843,16 +2843,13 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
 		goto out;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    test_bit(STATUS_SCANNING, &priv->status))
+	    test_bit(STATUS_SCANNING, &priv->status) ||
+	    test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
 		goto out;
 
 	if (!iwl_is_associated_ctx(ctx))
 		goto out;
 
-	/* channel switch in progress */
-	if (priv->switch_rxon.switch_in_progress == true)
-		goto out;
-
 	if (priv->cfg->ops->lib->set_channel_switch) {
 
 		ch = channel->hw_value;
@@ -2901,15 +2898,19 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
 			 * at this point, staging_rxon has the
 			 * configuration for channel switch
 			 */
+			set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+			priv->switch_channel = cpu_to_le16(ch);
 			if (priv->cfg->ops->lib->set_channel_switch(priv,
-								    ch_switch))
-				priv->switch_rxon.switch_in_progress = false;
+								    ch_switch)) {
+				clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+					  &priv->status);
+				priv->switch_channel = 0;
+				ieee80211_chswitch_done(ctx->vif, false);
+			}
 		}
 	}
 out:
 	mutex_unlock(&priv->mutex);
-	if (!priv->switch_rxon.switch_in_progress)
-		ieee80211_chswitch_done(ctx->vif, false);
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4653dea..213c80c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -843,12 +843,8 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	if (priv->switch_rxon.switch_in_progress) {
+	if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
 		ieee80211_chswitch_done(ctx->vif, is_success);
-		mutex_lock(&priv->mutex);
-		priv->switch_rxon.switch_in_progress = false;
-		mutex_unlock(&priv->mutex);
-	}
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 3bb76f6..a54d416 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -560,6 +560,7 @@ void iwlcore_free_geos(struct iwl_priv *priv);
 #define STATUS_POWER_PMI	16
 #define STATUS_FW_ERROR		17
 #define STATUS_DEVICE_ENABLED	18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
 
 
 static inline int iwl_is_ready(struct iwl_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 22a6e3e..c8de236 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -982,17 +982,6 @@ struct traffic_stats {
 };
 
 /*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
-	bool switch_in_progress;
-	__le16 channel;
-};
-
-/*
  * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
  * to perform continuous uCode event logging operation if enabled
  */
@@ -1287,7 +1276,7 @@ struct iwl_priv {
 
 	struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
 
-	struct iwl_switch_rxon switch_rxon;
+	__le16 switch_channel;
 
 	struct {
 		u32 error_event_table;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 0053e9e..b774517 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -250,19 +250,19 @@ static void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 	struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
 
-	if (priv->switch_rxon.switch_in_progress) {
-		if (!le32_to_cpu(csa->status) &&
-		    (csa->channel == priv->switch_rxon.channel)) {
-			rxon->channel = csa->channel;
-			ctx->staging.channel = csa->channel;
-			IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
-			      le16_to_cpu(csa->channel));
-			iwl_chswitch_done(priv, true);
-		} else {
-			IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+	if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+		return;
+
+	if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+		rxon->channel = csa->channel;
+		ctx->staging.channel = csa->channel;
+		IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
 			      le16_to_cpu(csa->channel));
-			iwl_chswitch_done(priv, false);
-		}
+		iwl_chswitch_done(priv, true);
+	} else {
+		IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+			le16_to_cpu(csa->channel));
+		iwl_chswitch_done(priv, false);
 	}
 }
 
-- 
cgit v0.10.2


From 59e7e7078d6c2c6294caf454c6e3695f9d3e46a2 Mon Sep 17 00:00:00 2001
From: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Thu, 2 Jun 2011 17:28:37 -0300
Subject: mac80211: call dev_alloc_name before copying name to sdata

This partially reverts 1c5cae815d19ffe02bdfda1260949ef2b1806171, because
the netdev name is copied into sdata->name, which is used for debugging
messages, for example. Otherwise, we get messages like this:

wlan%d: authenticated

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 49d4f86..dee30ae 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1145,6 +1145,10 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 				+ IEEE80211_ENCRYPT_HEADROOM;
 	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
 
+	ret = dev_alloc_name(ndev, ndev->name);
+	if (ret < 0)
+		goto fail;
+
 	ieee80211_assign_perm_addr(local, ndev, type);
 	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
-- 
cgit v0.10.2


From d2ac49fe3c7c4730323c1042fb53a2e008643b6a Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Fri, 3 Jun 2011 00:13:26 +0100
Subject: libertas_sdio: handle spurious interrupts

Commit 06e8935febe687e2a561707d4c7ca4245d261dbe adds an IRQ handling
optimization for single-function SDIO cards like this one, but at the
same time exposes a small hardware bug.

During hardware init, an interrupt is generated with (apparently) no
source. Previously, mmc threw this interrupt away, but now (due to the
optimization), the mmc layer passes this onto libertas, before it is ready
(and before it has enabled interrupts), causing a crash.

Work around this hardware bug by registering the IRQ handler later and
making it capable of handling interrupts with no cause. The change that
makes the IRQ handler registration happen later actually eliminates
the spurious interrupt as well.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a7b5cb0..224e985 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -907,7 +907,7 @@ static void if_sdio_interrupt(struct sdio_func *func)
 	card = sdio_get_drvdata(func);
 
 	cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
-	if (ret)
+	if (ret || !cause)
 		goto out;
 
 	lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
@@ -1008,10 +1008,6 @@ static int if_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto release;
 
-	ret = sdio_claim_irq(func, if_sdio_interrupt);
-	if (ret)
-		goto disable;
-
 	/* For 1-bit transfers to the 8686 model, we need to enable the
 	 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
 	 * bit to allow access to non-vendor registers. */
@@ -1083,6 +1079,21 @@ static int if_sdio_probe(struct sdio_func *func,
 		card->rx_unit = 0;
 
 	/*
+	 * Set up the interrupt handler late.
+	 *
+	 * If we set it up earlier, the (buggy) hardware generates a spurious
+	 * interrupt, even before the interrupt has been enabled, with
+	 * CCCR_INTx = 0.
+	 *
+	 * We register the interrupt handler late so that we can handle any
+	 * spurious interrupts, and also to avoid generation of that known
+	 * spurious interrupt in the first place.
+	 */
+	ret = sdio_claim_irq(func, if_sdio_interrupt);
+	if (ret)
+		goto disable;
+
+	/*
 	 * Enable interrupts now that everything is set up
 	 */
 	sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
-- 
cgit v0.10.2


From ab6a44ce1da48d35fe7ec95fa068aa617bd7e8dd Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 6 Jun 2011 14:35:27 -0400
Subject: Revert "mac80211: Skip tailroom reservation for full HW-crypto
 devices"

This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6.

Conflicts:

	net/mac80211/key.c

That commit has a race that causes a warning, as documented in the thread
here:

	http://marc.info/?l=linux-wireless&m=130717684914101&w=2

Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 2025af5..090b0ec 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -775,9 +775,6 @@ struct ieee80211_local {
 
 	int tx_headroom; /* required headroom for hardware/radiotap */
 
-	/* count for keys needing tailroom space allocation */
-	int crypto_tx_tailroom_needed_cnt;
-
 	/* Tasklet and skb queue to process calls from IRQ mode. All frames
 	 * added to skb_queue will be processed, but frames in
 	 * skb_queue_unreliable may be dropped if the total length of these
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 31afd712..f825e2f 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -101,11 +101,6 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 
 	if (!ret) {
 		key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-
-		if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
-			key->local->crypto_tx_tailroom_needed_cnt--;
-
 		return 0;
 	}
 
@@ -161,10 +156,6 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 			  key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
 
 	key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-
-	if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-	      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
-		key->local->crypto_tx_tailroom_needed_cnt++;
 }
 
 void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
@@ -403,10 +394,8 @@ static void __ieee80211_key_destroy(struct ieee80211_key *key)
 		ieee80211_aes_key_free(key->u.ccmp.tfm);
 	if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
 		ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
-	if (key->local) {
+	if (key->local)
 		ieee80211_debugfs_key_remove(key);
-		key->local->crypto_tx_tailroom_needed_cnt--;
-	}
 
 	kfree(key);
 }
@@ -468,8 +457,6 @@ int ieee80211_key_link(struct ieee80211_key *key,
 
 	ieee80211_debugfs_key_add(key);
 
-	key->local->crypto_tx_tailroom_needed_cnt++;
-
 	ret = ieee80211_key_enable_hw_accel(key);
 
 	mutex_unlock(&sdata->local->key_mtx);
@@ -511,12 +498,8 @@ void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata)
 
 	mutex_lock(&sdata->local->key_mtx);
 
-	sdata->local->crypto_tx_tailroom_needed_cnt = 0;
-
-	list_for_each_entry(key, &sdata->key_list, list) {
-		sdata->local->crypto_tx_tailroom_needed_cnt++;
+	list_for_each_entry(key, &sdata->key_list, list)
 		ieee80211_key_enable_hw_accel(key);
-	}
 
 	mutex_unlock(&sdata->local->key_mtx);
 }
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 64e0f75..3104c84 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1480,7 +1480,12 @@ static int ieee80211_skb_resize(struct ieee80211_local *local,
 {
 	int tail_need = 0;
 
-	if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
+	/*
+	 * This could be optimised, devices that do full hardware
+	 * crypto (including TKIP MMIC) need no tailroom... But we
+	 * have no drivers for such devices currently.
+	 */
+	if (may_encrypt) {
 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
 		tail_need -= skb_tailroom(skb);
 		tail_need = max_t(int, tail_need, 0);
-- 
cgit v0.10.2


From 42b70a5f6d18165a075d189d1bee82fad7cdbf29 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Thu, 26 May 2011 17:14:22 +0200
Subject: iwlagn: use cts-to-self protection on 5000 adapters series

This patch fixes 802.11n stability and performance regression we have
since 2.6.35. It boost performance on my 5GHz N-only network from about
5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz.

These are test results of 5x downloading of approximately 700MB iso
image:

vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110
patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946

This was achieved with NetworkManager configured to do not perform
periodical scans, by configuring constant BSSID. With periodical scans,
after some time, performance downgrade to unpatched driver level, like
in example below:

patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683

However patch still make better here, since similar test on unpatched
driver make link disconnects with below messages after some time:

wlan1: authenticate with 00:23:69:35:d1:3f (try 1)
wlan1: authenticate with 00:23:69:35:d1:3f (try 2)
wlan1: authenticate with 00:23:69:35:d1:3f (try 3)
wlan1: authentication with 00:23:69:35:d1:3f timed out

On 2.6.35 kernel patch helps against connection hangs with messages:

iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload.
iwlagn 0000:20:00.0: On demand firmware reload
iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting

Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 5b721c5..f99f9c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -423,7 +423,6 @@ static struct iwl_base_params iwl5000_base_params = {
 };
 static struct iwl_ht_params iwl5000_ht_params = {
 	.ht_greenfield_support = true,
-	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
 #define IWL_DEVICE_5000						\
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index b12c72d..23fa93d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -163,17 +163,9 @@ static void iwlagn_tx_cmd_protection(struct iwl_priv *priv,
 				     __le16 fc, __le32 *tx_flags)
 {
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
-	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+	    info->flags & IEEE80211_TX_CTL_AMPDU)
 		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
-		return;
-	}
-
-	if (priv->cfg->ht_params &&
-	    priv->cfg->ht_params->use_rts_for_aggregation &&
-	    info->flags & IEEE80211_TX_CTL_AMPDU) {
-		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
-		return;
-	}
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 2532c7d..0188749 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -325,6 +325,14 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 			return 0;
 	}
 
+	/*
+	 * force CTS-to-self frames protection if RTS-CTS is not preferred
+	 * one aggregation protection method
+	 */
+	if (!(priv->cfg->ht_params &&
+	      priv->cfg->ht_params->use_rts_for_aggregation))
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
 	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
 	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
 		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
-- 
cgit v0.10.2


From 3bb42a64960253353278876ca8da6b0a7d3bea87 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stf_xl@wp.pl>
Date: Sat, 4 Jun 2011 16:48:54 +0200
Subject: rt2x00: fix rmmod crash

Avoid queue and run autowakeup_work when device is not present anymore.
That prevent rmmod and device remove crash introduced by:

commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde
Author: Ivo van Doorn <ivdoorn@gmail.com>
Date:   Sat Apr 30 17:18:18 2011 +0200

    rt2x00: Add autowake support for USB hardware

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 555180d..b704e5b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -250,7 +250,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
 		rt2x00link_reset_tuner(rt2x00dev, false);
 
-	if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
 	    (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
 	    (conf->flags & IEEE80211_CONF_PS)) {
 		beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c018d67..939821b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -146,6 +146,9 @@ static void rt2x00lib_autowakeup(struct work_struct *work)
 	struct rt2x00_dev *rt2x00dev =
 	    container_of(work, struct rt2x00_dev, autowakeup_work.work);
 
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
 	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 		ERROR(rt2x00dev, "Device failed to wakeup.\n");
 	clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
@@ -1160,6 +1163,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 * Stop all work.
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
+	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
 		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
-- 
cgit v0.10.2


From 51892dbbd511911c0f965a36b431fc3e8f1e4f8a Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Mon, 6 Jun 2011 15:11:30 +0200
Subject: iwl4965: set tx power after rxon_assoc

Setting tx power can be deferred during scan or changing channel.
If after that correct tx power settings will not be sent to device,
we can observe transmission problems and timeouts. Force to send
tx power settings also after partial rxon change, to assure device
always be configured with up-to-date settings.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=36492

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index f9db25b..e1b8922 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1237,7 +1237,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c
 
 		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
 		iwl_legacy_print_rx_config_cmd(priv, ctx);
-		return 0;
+		goto set_tx_power;
 	}
 
 	/* If we are currently associated and the new config requires
@@ -1317,6 +1317,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c
 
 	iwl4965_init_sensitivity(priv);
 
+set_tx_power:
 	/* If we issue a new RXON command which required a tune then we must
 	 * send a new TXPOWER command or we won't be able to Tx any frames */
 	ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
-- 
cgit v0.10.2