From 23450319e2890986c247ec0aa1442f060e657e6d Mon Sep 17 00:00:00 2001 From: Suleiman Souhlal Date: Tue, 10 Apr 2007 22:38:37 +0200 Subject: ide: correctly prevent IDE timer expiry function to run if request was already handled It is possible for the timer expiry function to run even though the request has already been handled: ide_timer_expiry() only checks that the handler is not NULL, but it is possible that we have handled a request (thus clearing the handler) and then started a new request (thus starting the timer again, and setting a handler). A simple way to exhibit this is to set the DMA timeout to 1 jiffy and run dd: The kernel will panic after a few minutes because ide_timer_expiry() tries to add a timer when it's already active. To fix this, we simply add a request generation count that gets incremented at every interrupt, and check in ide_timer_expiry() that we have not already handled a new interrupt before running the expiry function. Signed-off-by: Suleiman Souhlal Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 0e02800..8670112 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1226,6 +1226,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) #endif /* so that ide_timer_expiry knows what to do */ hwgroup->sleeping = 1; + hwgroup->req_gen_timer = hwgroup->req_gen; mod_timer(&hwgroup->timer, sleep); /* we purposely leave hwgroup->busy==1 * while sleeping */ @@ -1411,7 +1412,8 @@ void ide_timer_expiry (unsigned long data) spin_lock_irqsave(&ide_lock, flags); - if ((handler = hwgroup->handler) == NULL) { + if (((handler = hwgroup->handler) == NULL) || + (hwgroup->req_gen != hwgroup->req_gen_timer)) { /* * Either a marginal timeout occurred * (got the interrupt just as timer expired), @@ -1439,6 +1441,7 @@ void ide_timer_expiry (unsigned long data) if ((wait = expiry(drive)) > 0) { /* reset timer */ hwgroup->timer.expires = jiffies + wait; + hwgroup->req_gen_timer = hwgroup->req_gen; add_timer(&hwgroup->timer); spin_unlock_irqrestore(&ide_lock, flags); return; @@ -1653,6 +1656,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name); } hwgroup->handler = NULL; + hwgroup->req_gen++; del_timer(&hwgroup->timer); spin_unlock(&ide_lock); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 1ee53a5..3caa176 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -889,6 +889,7 @@ static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, hwgroup->handler = handler; hwgroup->expiry = expiry; hwgroup->timer.expires = jiffies + timeout; + hwgroup->req_gen_timer = hwgroup->req_gen; add_timer(&hwgroup->timer); } @@ -929,6 +930,7 @@ void ide_execute_command(ide_drive_t *drive, task_ioreg_t cmd, ide_handler_t *ha hwgroup->handler = handler; hwgroup->expiry = expiry; hwgroup->timer.expires = jiffies + timeout; + hwgroup->req_gen_timer = hwgroup->req_gen; add_timer(&hwgroup->timer); hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG); /* Drive takes 400nS to respond, we must avoid the IRQ being diff --git a/include/linux/ide.h b/include/linux/ide.h index 58564a1..d3bbc71 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -861,6 +861,8 @@ typedef struct hwgroup_s { int (*expiry)(ide_drive_t *); /* ide_system_bus_speed */ int pio_clock; + int req_gen; + int req_gen_timer; unsigned char cmd_buf[4]; } ide_hwgroup_t; -- cgit v0.10.2 From 76ca1af10e28021e1894c5703da42b5e7bff1771 Mon Sep 17 00:00:00 2001 From: Stuart Hayes Date: Tue, 10 Apr 2007 22:38:43 +0200 Subject: ide: ugly messages trying to open CD drive with no media present I get the following error messages when trying to open a CD device (specifically, the Teac CD-ROM CD-224E) that has no media present: hda: packet command error: status=3D0x51 { DriveReady SeekComplete Error } hda: packet command error: error=3D0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown This happens when a "start stop unit" command (0x1b 0 0 0 3 0 0 0 0 0) is sent to the drive to try to close the CD-ROM tray, but this drive doesn't have that capability (it's a slim portable-type CD-ROM), so it reports sense key 5 (illegal request) with asc/ascq 24/0. This is exactly how SFF8090i says it should respond. But ide-cd.c (in cdrom_decode_status() ) just sees sense key 5 and spews out an error. It then goes on to request sense data, and cdrom_log_sense() understands this error and doesn't log it. The patch, for kernel 2.6.20.4, suppresses this error message. Signed-off-by: Stuart Hayes Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 45a928c..638becd 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -735,6 +735,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_saw_media_change (drive); /*printk("%s: media changed\n",drive->name);*/ return 0; + } else if ((sense_key == ILLEGAL_REQUEST) && + (rq->cmd[0] == GPCMD_START_STOP_UNIT)) { + /* + * Don't print error message for this condition-- + * SFF8090i indicates that 5/24/00 is the correct + * response to a request to close the tray if the + * drive doesn't have that capability. + * cdrom_log_sense() knows this! + */ } else if (!(rq->cmd_flags & REQ_QUIET)) { /* Otherwise, print an error. */ ide_dump_status(drive, "packet command error", stat); -- cgit v0.10.2 From a7a832de9e9624bcf069a5369c3c38ba2f44d460 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Tue, 10 Apr 2007 22:39:14 +0200 Subject: ide: add "optical" to sysfs "media" attribute Add "optical" to sysfs "media" attribute as already in /proc Signed-off-by: Danny Kukawka Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index a6f098f..ae5bf2b 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1962,6 +1962,8 @@ static char *media_string(ide_drive_t *drive) return "tape"; case ide_floppy: return "floppy"; + case ide_optical: + return "optical"; default: return "UNKNOWN"; } -- cgit v0.10.2