From be7b6d64c0f2f31ea03746edaabb22f57234cb49 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:17 +0300 Subject: qede: Fix VF minimum BW setting VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 337e839..3bb1428 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1824,7 +1824,7 @@ static int qede_set_vf_rate(struct net_device *dev, int vfidx, { struct qede_dev *edev = netdev_priv(dev); - return edev->ops->iov->set_rate(edev->cdev, vfidx, max_tx_rate, + return edev->ops->iov->set_rate(edev->cdev, vfidx, min_tx_rate, max_tx_rate); } -- cgit v0.10.2 From ce2b885cc5014d1cbcbe519c45f00f6a59e5ab70 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:18 +0300 Subject: qede: Reload on GRO changes Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 3bb1428..5d00d14 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2091,6 +2091,29 @@ static void qede_vlan_mark_nonconfigured(struct qede_dev *edev) edev->accept_any_vlan = false; } +int qede_set_features(struct net_device *dev, netdev_features_t features) +{ + struct qede_dev *edev = netdev_priv(dev); + netdev_features_t changes = features ^ dev->features; + bool need_reload = false; + + /* No action needed if hardware GRO is disabled during driver load */ + if (changes & NETIF_F_GRO) { + if (dev->features & NETIF_F_GRO) + need_reload = !edev->gro_disable; + else + need_reload = edev->gro_disable; + } + + if (need_reload && netif_running(edev->ndev)) { + dev->features = features; + qede_reload(edev, NULL, NULL); + return 1; + } + + return 0; +} + #ifdef CONFIG_QEDE_VXLAN static void qede_add_vxlan_port(struct net_device *dev, sa_family_t sa_family, __be16 port) @@ -2175,6 +2198,7 @@ static const struct net_device_ops qede_netdev_ops = { #endif .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid, + .ndo_set_features = qede_set_features, .ndo_get_stats64 = qede_get_stats64, #ifdef CONFIG_QED_SRIOV .ndo_set_vf_link_state = qede_set_vf_link_state, -- cgit v0.10.2 From 6ecb0a0c0d9539fac1497d1d218e60a393a1070c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:19 +0300 Subject: qede: Don't expose self-test for VFs PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 1bc7535..ad3cae3 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -230,7 +230,10 @@ static int qede_get_sset_count(struct net_device *dev, int stringset) case ETH_SS_PRIV_FLAGS: return QEDE_PRI_FLAG_LEN; case ETH_SS_TEST: - return QEDE_ETHTOOL_TEST_MAX; + if (!IS_VF(edev)) + return QEDE_ETHTOOL_TEST_MAX; + else + return 0; default: DP_VERBOSE(edev, QED_MSG_DEBUG, "Unsupported stringset 0x%08x\n", stringset); -- cgit v0.10.2 From 795292916cf9d8c47c53b692bcb36b02953101cf Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:20 +0300 Subject: qed: Fix allocation in interrupt context Commit 39651abd2814 ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 089016f..7aeed2f 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -155,7 +155,7 @@ void qed_resc_free(struct qed_dev *cdev) } } -static int qed_init_qm_info(struct qed_hwfn *p_hwfn) +static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) { u8 num_vports, vf_offset = 0, i, vport_id, num_ports, curr_queue = 0; struct qed_qm_info *qm_info = &p_hwfn->qm_info; @@ -182,23 +182,28 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn) /* PQs will be arranged as follows: First per-TC PQ then pure-LB quete. */ - qm_info->qm_pq_params = kzalloc(sizeof(*qm_info->qm_pq_params) * - num_pqs, GFP_KERNEL); + qm_info->qm_pq_params = kcalloc(num_pqs, + sizeof(struct init_qm_pq_params), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->qm_pq_params) goto alloc_err; - qm_info->qm_vport_params = kzalloc(sizeof(*qm_info->qm_vport_params) * - num_vports, GFP_KERNEL); + qm_info->qm_vport_params = kcalloc(num_vports, + sizeof(struct init_qm_vport_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_vport_params) goto alloc_err; - qm_info->qm_port_params = kzalloc(sizeof(*qm_info->qm_port_params) * - MAX_NUM_PORTS, GFP_KERNEL); + qm_info->qm_port_params = kcalloc(MAX_NUM_PORTS, + sizeof(struct init_qm_port_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_port_params) goto alloc_err; - qm_info->wfq_data = kcalloc(num_vports, sizeof(*qm_info->wfq_data), - GFP_KERNEL); + qm_info->wfq_data = kcalloc(num_vports, sizeof(struct qed_wfq_data), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->wfq_data) goto alloc_err; @@ -299,7 +304,7 @@ int qed_qm_reconf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) qed_qm_info_free(p_hwfn); /* initialize qed's qm data structure */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, false); if (rc) return rc; @@ -388,7 +393,7 @@ int qed_resc_alloc(struct qed_dev *cdev) goto alloc_err; /* Prepare and process QM requirements */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, true); if (rc) goto alloc_err; -- cgit v0.10.2 From cc3d5eb09111a471f942c76e9610ee962e1d4c31 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:21 +0300 Subject: qed: Save min/max accross dcbx-change When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 7aeed2f..920eadd 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -161,6 +161,8 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) struct qed_qm_info *qm_info = &p_hwfn->qm_info; struct init_qm_port_params *p_qm_port; u16 num_pqs, multi_cos_tcs = 1; + u8 pf_wfq = qm_info->pf_wfq; + u32 pf_rl = qm_info->pf_rl; u16 num_vfs = 0; #ifdef CONFIG_QED_SRIOV @@ -269,10 +271,10 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) for (i = 0; i < qm_info->num_vports; i++) qm_info->qm_vport_params[i].vport_wfq = 1; - qm_info->pf_wfq = 0; - qm_info->pf_rl = 0; qm_info->vport_rl_en = 1; qm_info->vport_wfq_en = 1; + qm_info->pf_rl = pf_rl; + qm_info->pf_wfq = pf_wfq; return 0; -- cgit v0.10.2 From 1af9dcf7f90e6b75b7c42eaaf19cdd5da1354784 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:22 +0300 Subject: qed: Add missing 100g init mode Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 920eadd..2a7c875 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -588,7 +588,14 @@ static void qed_calc_hw_mode(struct qed_hwfn *p_hwfn) hw_mode |= 1 << MODE_ASIC; + if (p_hwfn->cdev->num_hwfns > 1) + hw_mode |= 1 << MODE_100G; + p_hwfn->hw_info.hw_mode = hw_mode; + + DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP), + "Configuring function for hw_mode: 0x%08x\n", + p_hwfn->hw_info.hw_mode); } /* Init run time data for all PFs on an engine. */ -- cgit v0.10.2 From bb13ace7dca5d2385847e43511acf5777da35c0e Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:23 +0300 Subject: qed: Prevent 100g from working in MSI Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 2a7c875..579c6d5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -835,6 +835,11 @@ int qed_hw_init(struct qed_dev *cdev, u32 load_code, param; int rc, mfw_rc, i; + if ((int_mode == QED_INT_MODE_MSI) && (cdev->num_hwfns > 1)) { + DP_NOTICE(cdev, "MSI mode is not supported for CMT devices\n"); + return -EINVAL; + } + if (IS_PF(cdev)) { rc = qed_init_fw_data(cdev, bin_fw_data); if (rc != 0) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 8b22f87..7530646 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -413,15 +413,17 @@ static int qed_set_int_mode(struct qed_dev *cdev, bool force_mode) /* Fallthrough */ case QED_INT_MODE_MSI: - rc = pci_enable_msi(cdev->pdev); - if (!rc) { - int_params->out.int_mode = QED_INT_MODE_MSI; - goto out; - } + if (cdev->num_hwfns == 1) { + rc = pci_enable_msi(cdev->pdev); + if (!rc) { + int_params->out.int_mode = QED_INT_MODE_MSI; + goto out; + } - DP_NOTICE(cdev, "Failed to enable MSI\n"); - if (force_mode) - goto out; + DP_NOTICE(cdev, "Failed to enable MSI\n"); + if (force_mode) + goto out; + } /* Fallthrough */ case QED_INT_MODE_INTA: -- cgit v0.10.2 From 3e7cfce228c6c67dd31e09175eaca55fee0c7082 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:24 +0300 Subject: qed: Don't config min BW on 100g on link flap Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 579c6d5..2d89e8c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -2105,6 +2105,13 @@ void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate) { int i; + if (cdev->num_hwfns > 1) { + DP_VERBOSE(cdev, + NETIF_MSG_LINK, + "WFQ configuration is not supported for this device\n"); + return; + } + for_each_hwfn(cdev, i) { struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; -- cgit v0.10.2