From 03efed8a2a1b8e00164eb4720a82a7dd5e368a8e Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Sat, 28 May 2011 00:34:19 +0800 Subject: ocfs2: Bugfix for hard readonly mount ocfs2 cannot currently mount a device that is readonly at the media ("hard readonly"). Fix the broken places. see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322 [ Description edited -- Joel ] Signed-off-by: Tiger Yang Reviewed-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 7642d7c..da103f5 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1692,7 +1692,7 @@ int ocfs2_open_lock(struct inode *inode) mlog(0, "inode %llu take PRMODE open lock\n", (unsigned long long)OCFS2_I(inode)->ip_blkno); - if (ocfs2_mount_local(osb)) + if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb)) goto out; lockres = &OCFS2_I(inode)->ip_open_lockres; @@ -1718,6 +1718,12 @@ int ocfs2_try_open_lock(struct inode *inode, int write) (unsigned long long)OCFS2_I(inode)->ip_blkno, write ? "EXMODE" : "PRMODE"); + if (ocfs2_is_hard_readonly(osb)) { + if (write) + status = -EROFS; + goto out; + } + if (ocfs2_mount_local(osb)) goto out; @@ -2298,7 +2304,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode, if (ocfs2_is_hard_readonly(osb)) { if (ex) status = -EROFS; - goto bail; + goto getbh; } if (ocfs2_mount_local(osb)) @@ -2356,7 +2362,7 @@ local: mlog_errno(status); goto bail; } - +getbh: if (ret_bh) { status = ocfs2_assign_bh(inode, ret_bh, local_bh); if (status < 0) { @@ -2628,8 +2634,11 @@ int ocfs2_dentry_lock(struct dentry *dentry, int ex) BUG_ON(!dl); - if (ocfs2_is_hard_readonly(osb)) - return -EROFS; + if (ocfs2_is_hard_readonly(osb)) { + if (ex) + return -EROFS; + return 0; + } if (ocfs2_mount_local(osb)) return 0; @@ -2647,7 +2656,7 @@ void ocfs2_dentry_unlock(struct dentry *dentry, int ex) struct ocfs2_dentry_lock *dl = dentry->d_fsdata; struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb); - if (!ocfs2_mount_local(osb)) + if (!ocfs2_is_hard_readonly(osb) && !ocfs2_mount_local(osb)) ocfs2_cluster_unlock(osb, &dl->dl_lockres, level); } diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index cdbaf5e..029c4cd 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1974,7 +1974,8 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) * If we failed before we got a uuid_str yet, we can't stop * heartbeat. Otherwise, do it. */ - if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str) + if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str && + !ocfs2_is_hard_readonly(osb)) hangup_needed = 1; if (osb->cconn) -- cgit v0.10.2 From 3d75be7c4771c7e4d5b5fa586a599af8473de32c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 May 2011 22:56:31 +0300 Subject: ocfs2: checking the wrong variable in ocfs2_move_extent() "new_phys_cpos" is always a valid pointer here. ocfs2_probe_alloc_group() allocates "*new_phys_cpos". Signed-off-by: Dan Carpenter Signed-off-by: Joel Becker diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index cd94270..d3433d6 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -746,7 +746,7 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context, */ ocfs2_probe_alloc_group(inode, gd_bh, &goal_bit, len, move_max_hop, new_phys_cpos); - if (!new_phys_cpos) { + if (!*new_phys_cpos) { ret = -ENOSPC; goto out_commit; } -- cgit v0.10.2 From 87f0d5c8db7aad85b9120c26723fdc63cd84a460 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 May 2011 22:57:16 +0300 Subject: ocfs2: null deref on allocation error The original code had a null derefence in the error handling. Signed-off-by: Dan Carpenter Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index bc91072..d9a6ce7 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -381,7 +381,7 @@ int ocfs2_info_handle_freeinode(struct inode *inode, if (!oifi) { status = -ENOMEM; mlog_errno(status); - goto bail; + goto out_err; } if (o2info_from_user(*oifi, req)) @@ -431,7 +431,7 @@ bail: o2info_set_request_error(&oifi->ifi_req, req); kfree(oifi); - +out_err: return status; } @@ -666,7 +666,7 @@ int ocfs2_info_handle_freefrag(struct inode *inode, if (!oiff) { status = -ENOMEM; mlog_errno(status); - goto bail; + goto out_err; } if (o2info_from_user(*oiff, req)) @@ -716,7 +716,7 @@ bail: o2info_set_request_error(&oiff->iff_req, req); kfree(oiff); - +out_err: return status; } -- cgit v0.10.2 From 730e663bd82c1a10a85ff00728d34152a5a67ec8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 30 May 2011 21:58:05 +0900 Subject: ocfs2: use proper little-endian bitops Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). Signed-off-by: Akinobu Mita Cc: Joel Becker Cc: Mark Fasheh Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 4092858..bcde467 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -836,13 +836,13 @@ static inline unsigned int ocfs2_clusters_to_megabytes(struct super_block *sb, static inline void _ocfs2_set_bit(unsigned int bit, unsigned long *bitmap) { - __test_and_set_bit_le(bit, bitmap); + __set_bit_le(bit, bitmap); } #define ocfs2_set_bit(bit, addr) _ocfs2_set_bit((bit), (unsigned long *)(addr)) static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap) { - __test_and_clear_bit_le(bit, bitmap); + __clear_bit_le(bit, bitmap); } #define ocfs2_clear_bit(bit, addr) _ocfs2_clear_bit((bit), (unsigned long *)(addr)) -- cgit v0.10.2 From d2eece376648d2f7ba0a7d78f3c4d0421e608ac2 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:21:54 -0700 Subject: ocfs2/cluster: Abort heartbeat start on hard-ro devices Currently if the heartbeat device is hard-ro, the o2hb thread keeps chugging along and dumping errors along the way. The user needs to manually stop the heartbeat. The patch addresses this shortcoming by adding a limit to the number of times the hb thread will iterate in an unsteady state. If the hb thread does not ready steady state in that many interation, the start is aborted. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 9a3e6bb..4728a74 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -216,6 +216,7 @@ struct o2hb_region { struct list_head hr_all_item; unsigned hr_unclean_stop:1, + hr_aborted_start:1, hr_item_pinned:1, hr_item_dropped:1; @@ -254,6 +255,10 @@ struct o2hb_region { * a more complete api that doesn't lead to this sort of fragility. */ atomic_t hr_steady_iterations; + /* terminate o2hb thread if it does not reach steady state + * (hr_steady_iterations == 0) within hr_unsteady_iterations */ + atomic_t hr_unsteady_iterations; + char hr_dev_name[BDEVNAME_SIZE]; unsigned int hr_timeout_ms; @@ -324,6 +329,10 @@ static void o2hb_write_timeout(struct work_struct *work) static void o2hb_arm_write_timeout(struct o2hb_region *reg) { + /* Arm writeout only after thread reaches steady state */ + if (atomic_read(®->hr_steady_iterations) != 0) + return; + mlog(ML_HEARTBEAT, "Queue write timeout for %u ms\n", O2HB_MAX_WRITE_TIMEOUT_MS); @@ -537,9 +546,14 @@ static int o2hb_verify_crc(struct o2hb_region *reg, return read == computed; } -/* We want to make sure that nobody is heartbeating on top of us -- - * this will help detect an invalid configuration. */ -static void o2hb_check_last_timestamp(struct o2hb_region *reg) +/* + * Compare the slot data with what we wrote in the last iteration. + * If the match fails, print an appropriate error message. This is to + * detect errors like... another node hearting on the same slot, + * flaky device that is losing writes, etc. + * Returns 1 if check succeeds, 0 otherwise. + */ +static int o2hb_check_own_slot(struct o2hb_region *reg) { struct o2hb_disk_slot *slot; struct o2hb_disk_heartbeat_block *hb_block; @@ -548,13 +562,13 @@ static void o2hb_check_last_timestamp(struct o2hb_region *reg) slot = ®->hr_slots[o2nm_this_node()]; /* Don't check on our 1st timestamp */ if (!slot->ds_last_time) - return; + return 0; hb_block = slot->ds_raw_block; if (le64_to_cpu(hb_block->hb_seq) == slot->ds_last_time && le64_to_cpu(hb_block->hb_generation) == slot->ds_last_generation && hb_block->hb_node == slot->ds_node_num) - return; + return 1; #define ERRSTR1 "Another node is heartbeating on device" #define ERRSTR2 "Heartbeat generation mismatch on device" @@ -574,6 +588,8 @@ static void o2hb_check_last_timestamp(struct o2hb_region *reg) (unsigned long long)slot->ds_last_time, hb_block->hb_node, (unsigned long long)le64_to_cpu(hb_block->hb_generation), (unsigned long long)le64_to_cpu(hb_block->hb_seq)); + + return 0; } static inline void o2hb_prepare_block(struct o2hb_region *reg, @@ -719,17 +735,24 @@ static void o2hb_shutdown_slot(struct o2hb_disk_slot *slot) o2nm_node_put(node); } -static void o2hb_set_quorum_device(struct o2hb_region *reg, - struct o2hb_disk_slot *slot) +static void o2hb_set_quorum_device(struct o2hb_region *reg) { - assert_spin_locked(&o2hb_live_lock); - if (!o2hb_global_heartbeat_active()) return; - if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + /* Prevent race with o2hb_heartbeat_group_drop_item() */ + if (kthread_should_stop()) + return; + + /* Tag region as quorum only after thread reaches steady state */ + if (atomic_read(®->hr_steady_iterations) != 0) return; + spin_lock(&o2hb_live_lock); + + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + goto unlock; + /* * A region can be added to the quorum only when it sees all * live nodes heartbeat on it. In other words, the region has been @@ -737,13 +760,10 @@ static void o2hb_set_quorum_device(struct o2hb_region *reg, */ if (memcmp(reg->hr_live_node_bitmap, o2hb_live_node_bitmap, sizeof(o2hb_live_node_bitmap))) - return; - - if (slot->ds_changed_samples < O2HB_LIVE_THRESHOLD) - return; + goto unlock; - printk(KERN_NOTICE "o2hb: Region %s is now a quorum device\n", - config_item_name(®->hr_item)); + printk(KERN_NOTICE "o2hb: Region %s (%s) is now a quorum device\n", + config_item_name(®->hr_item), reg->hr_dev_name); set_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); @@ -754,6 +774,8 @@ static void o2hb_set_quorum_device(struct o2hb_region *reg, if (o2hb_pop_count(&o2hb_quorum_region_bitmap, O2NM_MAX_REGIONS) > O2HB_PIN_CUT_OFF) o2hb_region_unpin(NULL); +unlock: + spin_unlock(&o2hb_live_lock); } static int o2hb_check_slot(struct o2hb_region *reg, @@ -925,8 +947,6 @@ fire_callbacks: slot->ds_equal_samples = 0; } out: - o2hb_set_quorum_device(reg, slot); - spin_unlock(&o2hb_live_lock); o2hb_run_event_list(&event); @@ -957,7 +977,8 @@ static int o2hb_highest_node(unsigned long *nodes, static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) { - int i, ret, highest_node, change = 0; + int i, ret, highest_node; + int membership_change = 0, own_slot_ok = 0; unsigned long configured_nodes[BITS_TO_LONGS(O2NM_MAX_NODES)]; unsigned long live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; struct o2hb_bio_wait_ctxt write_wc; @@ -966,7 +987,7 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) sizeof(configured_nodes)); if (ret) { mlog_errno(ret); - return ret; + goto bail; } /* @@ -982,8 +1003,9 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) highest_node = o2hb_highest_node(configured_nodes, O2NM_MAX_NODES); if (highest_node >= O2NM_MAX_NODES) { - mlog(ML_NOTICE, "ocfs2_heartbeat: no configured nodes found!\n"); - return -EINVAL; + mlog(ML_NOTICE, "o2hb: No configured nodes found!\n"); + ret = -EINVAL; + goto bail; } /* No sense in reading the slots of nodes that don't exist @@ -993,29 +1015,27 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) ret = o2hb_read_slots(reg, highest_node + 1); if (ret < 0) { mlog_errno(ret); - return ret; + goto bail; } /* With an up to date view of the slots, we can check that no * other node has been improperly configured to heartbeat in * our slot. */ - o2hb_check_last_timestamp(reg); + own_slot_ok = o2hb_check_own_slot(reg); /* fill in the proper info for our next heartbeat */ o2hb_prepare_block(reg, reg->hr_generation); - /* And fire off the write. Note that we don't wait on this I/O - * until later. */ ret = o2hb_issue_node_write(reg, &write_wc); if (ret < 0) { mlog_errno(ret); - return ret; + goto bail; } i = -1; while((i = find_next_bit(configured_nodes, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) { - change |= o2hb_check_slot(reg, ®->hr_slots[i]); + membership_change |= o2hb_check_slot(reg, ®->hr_slots[i]); } /* @@ -1030,18 +1050,39 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) * disk */ mlog(ML_ERROR, "Write error %d on device \"%s\"\n", write_wc.wc_error, reg->hr_dev_name); - return write_wc.wc_error; + ret = write_wc.wc_error; + goto bail; } - o2hb_arm_write_timeout(reg); + /* Skip disarming the timeout if own slot has stale/bad data */ + if (own_slot_ok) { + o2hb_set_quorum_device(reg); + o2hb_arm_write_timeout(reg); + } +bail: /* let the person who launched us know when things are steady */ - if (!change && (atomic_read(®->hr_steady_iterations) != 0)) { - if (atomic_dec_and_test(®->hr_steady_iterations)) + if (atomic_read(®->hr_steady_iterations) != 0) { + if (!ret && own_slot_ok && !membership_change) { + if (atomic_dec_and_test(®->hr_steady_iterations)) + wake_up(&o2hb_steady_queue); + } + } + + if (atomic_read(®->hr_steady_iterations) != 0) { + if (atomic_dec_and_test(®->hr_unsteady_iterations)) { + printk(KERN_NOTICE "o2hb: Unable to stabilize " + "heartbeart on region %s (%s)\n", + config_item_name(®->hr_item), + reg->hr_dev_name); + atomic_set(®->hr_steady_iterations, 0); + reg->hr_aborted_start = 1; wake_up(&o2hb_steady_queue); + ret = -EIO; + } } - return 0; + return ret; } /* Subtract b from a, storing the result in a. a *must* have a larger @@ -1095,7 +1136,8 @@ static int o2hb_thread(void *data) /* Pin node */ o2nm_depend_this_node(); - while (!kthread_should_stop() && !reg->hr_unclean_stop) { + while (!kthread_should_stop() && + !reg->hr_unclean_stop && !reg->hr_aborted_start) { /* We track the time spent inside * o2hb_do_disk_heartbeat so that we avoid more than * hr_timeout_ms between disk writes. On busy systems @@ -1103,10 +1145,7 @@ static int o2hb_thread(void *data) * likely to time itself out. */ do_gettimeofday(&before_hb); - i = 0; - do { - ret = o2hb_do_disk_heartbeat(reg); - } while (ret && ++i < 2); + ret = o2hb_do_disk_heartbeat(reg); do_gettimeofday(&after_hb); elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb); @@ -1117,7 +1156,8 @@ static int o2hb_thread(void *data) after_hb.tv_sec, (unsigned long) after_hb.tv_usec, elapsed_msec); - if (elapsed_msec < reg->hr_timeout_ms) { + if (!kthread_should_stop() && + elapsed_msec < reg->hr_timeout_ms) { /* the kthread api has blocked signals for us so no * need to record the return value. */ msleep_interruptible(reg->hr_timeout_ms - elapsed_msec); @@ -1134,20 +1174,20 @@ static int o2hb_thread(void *data) * to timeout on this region when we could just as easily * write a clear generation - thus indicating to them that * this node has left this region. - * - * XXX: Should we skip this on unclean_stop? */ - o2hb_prepare_block(reg, 0); - ret = o2hb_issue_node_write(reg, &write_wc); - if (ret == 0) { - o2hb_wait_on_io(reg, &write_wc); - } else { - mlog_errno(ret); + */ + if (!reg->hr_unclean_stop && !reg->hr_aborted_start) { + o2hb_prepare_block(reg, 0); + ret = o2hb_issue_node_write(reg, &write_wc); + if (ret == 0) + o2hb_wait_on_io(reg, &write_wc); + else + mlog_errno(ret); } /* Unpin node */ o2nm_undepend_this_node(); - mlog(ML_HEARTBEAT|ML_KTHREAD, "hb thread exiting\n"); + mlog(ML_HEARTBEAT|ML_KTHREAD, "o2hb thread exiting\n"); return 0; } @@ -1426,6 +1466,8 @@ static void o2hb_region_release(struct config_item *item) struct page *page; struct o2hb_region *reg = to_o2hb_region(item); + mlog(ML_HEARTBEAT, "hb region release (%s)\n", reg->hr_dev_name); + if (reg->hr_tmp_block) kfree(reg->hr_tmp_block); @@ -1792,7 +1834,10 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, live_threshold <<= 1; spin_unlock(&o2hb_live_lock); } - atomic_set(®->hr_steady_iterations, live_threshold + 1); + ++live_threshold; + atomic_set(®->hr_steady_iterations, live_threshold); + /* unsteady_iterations is double the steady_iterations */ + atomic_set(®->hr_unsteady_iterations, (live_threshold << 1)); hb_task = kthread_run(o2hb_thread, reg, "o2hb-%s", reg->hr_item.ci_name); @@ -1809,14 +1854,12 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, ret = wait_event_interruptible(o2hb_steady_queue, atomic_read(®->hr_steady_iterations) == 0); if (ret) { - /* We got interrupted (hello ptrace!). Clean up */ - spin_lock(&o2hb_live_lock); - hb_task = reg->hr_task; - reg->hr_task = NULL; - spin_unlock(&o2hb_live_lock); + atomic_set(®->hr_steady_iterations, 0); + reg->hr_aborted_start = 1; + } - if (hb_task) - kthread_stop(hb_task); + if (reg->hr_aborted_start) { + ret = -EIO; goto out; } @@ -1833,8 +1876,8 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, ret = -EIO; if (hb_task && o2hb_global_heartbeat_active()) - printk(KERN_NOTICE "o2hb: Heartbeat started on region %s\n", - config_item_name(®->hr_item)); + printk(KERN_NOTICE "o2hb: Heartbeat started on region %s (%s)\n", + config_item_name(®->hr_item), reg->hr_dev_name); out: if (filp) @@ -2092,13 +2135,6 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, /* stop the thread when the user removes the region dir */ spin_lock(&o2hb_live_lock); - if (o2hb_global_heartbeat_active()) { - clear_bit(reg->hr_region_num, o2hb_region_bitmap); - clear_bit(reg->hr_region_num, o2hb_live_region_bitmap); - if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) - quorum_region = 1; - clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); - } hb_task = reg->hr_task; reg->hr_task = NULL; reg->hr_item_dropped = 1; @@ -2107,19 +2143,30 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, if (hb_task) kthread_stop(hb_task); + if (o2hb_global_heartbeat_active()) { + spin_lock(&o2hb_live_lock); + clear_bit(reg->hr_region_num, o2hb_region_bitmap); + clear_bit(reg->hr_region_num, o2hb_live_region_bitmap); + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + quorum_region = 1; + clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); + spin_unlock(&o2hb_live_lock); + printk(KERN_NOTICE "o2hb: Heartbeat %s on region %s (%s)\n", + ((atomic_read(®->hr_steady_iterations) == 0) ? + "stopped" : "start aborted"), config_item_name(item), + reg->hr_dev_name); + } + /* * If we're racing a dev_write(), we need to wake them. They will * check reg->hr_task */ if (atomic_read(®->hr_steady_iterations) != 0) { + reg->hr_aborted_start = 1; atomic_set(®->hr_steady_iterations, 0); wake_up(&o2hb_steady_queue); } - if (o2hb_global_heartbeat_active()) - printk(KERN_NOTICE "o2hb: Heartbeat stopped on region %s\n", - config_item_name(®->hr_item)); - config_item_put(item); if (!o2hb_global_heartbeat_active() || !quorum_region) -- cgit v0.10.2 From 1dfecf810e0eacb35987905082f23e5c2cd26e91 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:22:54 -0700 Subject: ocfs2/cluster: Clean up messages in o2net o2net messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index db5ee4b..6e97895 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -545,7 +545,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, } if (was_valid && !valid) { - printk(KERN_NOTICE "o2net: no longer connected to " + printk(KERN_NOTICE "o2net: No longer connected to " SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc)); o2net_complete_nodes_nsw(nn); } @@ -555,7 +555,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, cancel_delayed_work(&nn->nn_connect_expired); printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n", o2nm_this_node() > sc->sc_node->nd_num ? - "connected to" : "accepted connection from", + "Connected to" : "Accepted connection from", SC_NODEF_ARGS(sc)); } @@ -643,7 +643,7 @@ static void o2net_state_change(struct sock *sk) o2net_sc_queue_work(sc, &sc->sc_connect_work); break; default: - printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT + printk(KERN_INFO "o2net: Connection to " SC_NODEF_FMT " shutdown, state %d\n", SC_NODEF_ARGS(sc), sk->sk_state); o2net_sc_queue_work(sc, &sc->sc_shutdown_work); @@ -1284,11 +1284,11 @@ static int o2net_check_handshake(struct o2net_sock_container *sc) struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num); if (hand->protocol_version != cpu_to_be64(O2NET_PROTOCOL_VERSION)) { - mlog(ML_NOTICE, SC_NODEF_FMT " advertised net protocol " - "version %llu but %llu is required, disconnecting\n", - SC_NODEF_ARGS(sc), - (unsigned long long)be64_to_cpu(hand->protocol_version), - O2NET_PROTOCOL_VERSION); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " Advertised net " + "protocol version %llu but %llu is required. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + (unsigned long long)be64_to_cpu(hand->protocol_version), + O2NET_PROTOCOL_VERSION); /* don't bother reconnecting if its the wrong version. */ o2net_ensure_shutdown(nn, sc, -ENOTCONN); @@ -1302,33 +1302,33 @@ static int o2net_check_handshake(struct o2net_sock_container *sc) */ if (be32_to_cpu(hand->o2net_idle_timeout_ms) != o2net_idle_timeout()) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a network idle timeout of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2net_idle_timeout_ms), - o2net_idle_timeout()); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a network " + "idle timeout of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2net_idle_timeout_ms), + o2net_idle_timeout()); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } if (be32_to_cpu(hand->o2net_keepalive_delay_ms) != o2net_keepalive_delay()) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a keepalive delay of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2net_keepalive_delay_ms), - o2net_keepalive_delay()); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a keepalive " + "delay of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2net_keepalive_delay_ms), + o2net_keepalive_delay()); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } if (be32_to_cpu(hand->o2hb_heartbeat_timeout_ms) != O2HB_MAX_WRITE_TIMEOUT_MS) { - mlog(ML_NOTICE, SC_NODEF_FMT " uses a heartbeat timeout of " - "%u ms, but we use %u ms locally. disconnecting\n", - SC_NODEF_ARGS(sc), - be32_to_cpu(hand->o2hb_heartbeat_timeout_ms), - O2HB_MAX_WRITE_TIMEOUT_MS); + printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a heartbeat " + "timeout of %u ms, but we use %u ms locally. " + "Disconnecting.\n", SC_NODEF_ARGS(sc), + be32_to_cpu(hand->o2hb_heartbeat_timeout_ms), + O2HB_MAX_WRITE_TIMEOUT_MS); o2net_ensure_shutdown(nn, sc, -ENOTCONN); return -1; } @@ -1539,28 +1539,16 @@ static void o2net_idle_timer(unsigned long data) { struct o2net_sock_container *sc = (struct o2net_sock_container *)data; struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num); - #ifdef CONFIG_DEBUG_FS - ktime_t now = ktime_get(); + unsigned long msecs = ktime_to_ms(ktime_get()) - + ktime_to_ms(sc->sc_tv_timer); +#else + unsigned long msecs = o2net_idle_timeout(); #endif - printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u " - "seconds, shutting it down.\n", SC_NODEF_ARGS(sc), - o2net_idle_timeout() / 1000, - o2net_idle_timeout() % 1000); - -#ifdef CONFIG_DEBUG_FS - mlog(ML_NOTICE, "Here are some times that might help debug the " - "situation: (Timer: %lld, Now %lld, DataReady %lld, Advance %lld-%lld, " - "Key 0x%08x, Func %u, FuncTime %lld-%lld)\n", - (long long)ktime_to_us(sc->sc_tv_timer), (long long)ktime_to_us(now), - (long long)ktime_to_us(sc->sc_tv_data_ready), - (long long)ktime_to_us(sc->sc_tv_advance_start), - (long long)ktime_to_us(sc->sc_tv_advance_stop), - sc->sc_msg_key, sc->sc_msg_type, - (long long)ktime_to_us(sc->sc_tv_func_start), - (long long)ktime_to_us(sc->sc_tv_func_stop)); -#endif + printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been " + "idle for %lu.%lu secs, shutting it down.\n", SC_NODEF_ARGS(sc), + msecs / 1000, msecs % 1000); /* * Initialize the nn_timeout so that the next connection attempt @@ -1693,8 +1681,8 @@ static void o2net_start_connect(struct work_struct *work) out: if (ret) { - mlog(ML_NOTICE, "connect attempt to " SC_NODEF_FMT " failed " - "with errno %d\n", SC_NODEF_ARGS(sc), ret); + printk(KERN_NOTICE "o2net: Connect attempt to " SC_NODEF_FMT + " failed with errno %d\n", SC_NODEF_ARGS(sc), ret); /* 0 err so that another will be queued and attempted * from set_nn_state */ if (sc) @@ -1717,8 +1705,8 @@ static void o2net_connect_expired(struct work_struct *work) spin_lock(&nn->nn_lock); if (!nn->nn_sc_valid) { - mlog(ML_ERROR, "no connection established with node %u after " - "%u.%u seconds, giving up and returning errors.\n", + printk(KERN_NOTICE "o2net: No connection established with " + "node %u after %u.%u seconds, giving up.\n", o2net_num_from_nn(nn), o2net_idle_timeout() / 1000, o2net_idle_timeout() % 1000); @@ -1861,21 +1849,21 @@ static int o2net_accept_one(struct socket *sock) node = o2nm_get_node_by_ip(sin.sin_addr.s_addr); if (node == NULL) { - mlog(ML_NOTICE, "attempt to connect from unknown node at %pI4:%d\n", - &sin.sin_addr.s_addr, ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Attempt to connect from unknown " + "node at %pI4:%d\n", &sin.sin_addr.s_addr, + ntohs(sin.sin_port)); ret = -EINVAL; goto out; } if (o2nm_this_node() >= node->nd_num) { local_node = o2nm_get_node_by_num(o2nm_this_node()); - mlog(ML_NOTICE, "unexpected connect attempt seen at node '%s' (" - "%u, %pI4:%d) from node '%s' (%u, %pI4:%d)\n", - local_node->nd_name, local_node->nd_num, - &(local_node->nd_ipv4_address), - ntohs(local_node->nd_ipv4_port), - node->nd_name, node->nd_num, &sin.sin_addr.s_addr, - ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Unexpected connect attempt seen " + "at node '%s' (%u, %pI4:%d) from node '%s' (%u, " + "%pI4:%d)\n", local_node->nd_name, local_node->nd_num, + &(local_node->nd_ipv4_address), + ntohs(local_node->nd_ipv4_port), node->nd_name, + node->nd_num, &sin.sin_addr.s_addr, ntohs(sin.sin_port)); ret = -EINVAL; goto out; } @@ -1900,10 +1888,10 @@ static int o2net_accept_one(struct socket *sock) ret = 0; spin_unlock(&nn->nn_lock); if (ret) { - mlog(ML_NOTICE, "attempt to connect from node '%s' at " - "%pI4:%d but it already has an open connection\n", - node->nd_name, &sin.sin_addr.s_addr, - ntohs(sin.sin_port)); + printk(KERN_NOTICE "o2net: Attempt to connect from node '%s' " + "at %pI4:%d but it already has an open connection\n", + node->nd_name, &sin.sin_addr.s_addr, + ntohs(sin.sin_port)); goto out; } @@ -1983,7 +1971,7 @@ static int o2net_open_listening_sock(__be32 addr, __be16 port) ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock); if (ret < 0) { - mlog(ML_ERROR, "unable to create socket, ret=%d\n", ret); + printk(KERN_ERR "o2net: Error %d while creating socket\n", ret); goto out; } @@ -2000,16 +1988,15 @@ static int o2net_open_listening_sock(__be32 addr, __be16 port) sock->sk->sk_reuse = 1; ret = sock->ops->bind(sock, (struct sockaddr *)&sin, sizeof(sin)); if (ret < 0) { - mlog(ML_ERROR, "unable to bind socket at %pI4:%u, " - "ret=%d\n", &addr, ntohs(port), ret); + printk(KERN_ERR "o2net: Error %d while binding socket at " + "%pI4:%u\n", ret, &addr, ntohs(port)); goto out; } ret = sock->ops->listen(sock, 64); - if (ret < 0) { - mlog(ML_ERROR, "unable to listen on %pI4:%u, ret=%d\n", - &addr, ntohs(port), ret); - } + if (ret < 0) + printk(KERN_ERR "o2net: Error %d while listening on %pI4:%u\n", + ret, &addr, ntohs(port)); out: if (ret) { -- cgit v0.10.2 From 8decab3c8dadcdf4f54ffb30df6e6f67b398b6e0 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:23:54 -0700 Subject: ocfs2/dlm: Clean up messages in o2dlm o2dlm messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 6ed6b95..ce225fb 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -539,17 +539,17 @@ again: static void __dlm_print_nodes(struct dlm_ctxt *dlm) { - int node = -1; + int node = -1, num = 0; assert_spin_locked(&dlm->spinlock); - printk(KERN_NOTICE "o2dlm: Nodes in domain %s: ", dlm->name); - + printk("( "); while ((node = find_next_bit(dlm->domain_map, O2NM_MAX_NODES, node + 1)) < O2NM_MAX_NODES) { printk("%d ", node); + ++num; } - printk("\n"); + printk(") %u nodes\n", num); } static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data, @@ -566,11 +566,10 @@ static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data, node = exit_msg->node_idx; - printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s\n", node, dlm->name); - spin_lock(&dlm->spinlock); clear_bit(node, dlm->domain_map); clear_bit(node, dlm->exit_domain_map); + printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s ", node, dlm->name); __dlm_print_nodes(dlm); /* notify anything attached to the heartbeat events */ @@ -755,6 +754,7 @@ void dlm_unregister_domain(struct dlm_ctxt *dlm) dlm_mark_domain_leaving(dlm); dlm_leave_domain(dlm); + printk(KERN_NOTICE "o2dlm: Leaving domain %s\n", dlm->name); dlm_force_free_mles(dlm); dlm_complete_dlm_shutdown(dlm); } @@ -970,7 +970,7 @@ static int dlm_assert_joined_handler(struct o2net_msg *msg, u32 len, void *data, clear_bit(assert->node_idx, dlm->exit_domain_map); __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); - printk(KERN_NOTICE "o2dlm: Node %u joins domain %s\n", + printk(KERN_NOTICE "o2dlm: Node %u joins domain %s ", assert->node_idx, dlm->name); __dlm_print_nodes(dlm); @@ -1701,8 +1701,10 @@ static int dlm_try_to_join_domain(struct dlm_ctxt *dlm) bail: spin_lock(&dlm->spinlock); __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); - if (!status) + if (!status) { + printk(KERN_NOTICE "o2dlm: Joining domain %s ", dlm->name); __dlm_print_nodes(dlm); + } spin_unlock(&dlm->spinlock); if (ctxt) { diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index 8d39e0fd6..c7f3e22 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -319,27 +319,23 @@ static enum dlm_status dlm_send_remote_lock_request(struct dlm_ctxt *dlm, tmpret = o2net_send_message(DLM_CREATE_LOCK_MSG, dlm->key, &create, sizeof(create), res->owner, &status); if (tmpret >= 0) { - // successfully sent and received - ret = status; // this is already a dlm_status + ret = status; if (ret == DLM_REJECTED) { - mlog(ML_ERROR, "%s:%.*s: BUG. this is a stale lockres " - "no longer owned by %u. that node is coming back " - "up currently.\n", dlm->name, create.namelen, + mlog(ML_ERROR, "%s: res %.*s, Stale lockres no longer " + "owned by node %u. That node is coming back up " + "currently.\n", dlm->name, create.namelen, create.name, res->owner); dlm_print_one_lock_resource(res); BUG(); } } else { - mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to " - "node %u\n", tmpret, DLM_CREATE_LOCK_MSG, dlm->key, - res->owner); - if (dlm_is_host_down(tmpret)) { + mlog(ML_ERROR, "%s: res %.*s, Error %d send CREATE LOCK to " + "node %u\n", dlm->name, create.namelen, create.name, + tmpret, res->owner); + if (dlm_is_host_down(tmpret)) ret = DLM_RECOVERING; - mlog(0, "node %u died so returning DLM_RECOVERING " - "from lock message!\n", res->owner); - } else { + else ret = dlm_err_to_dlm_status(tmpret); - } } return ret; diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 11eefb8..9f3b093 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -829,8 +829,8 @@ lookup: * but they might own this lockres. wait on them. */ bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) { - mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to " - "recover before lock mastery can begin\n", + mlog(0, "%s: res %.*s, At least one node (%d) " + "to recover before lock mastery can begin\n", dlm->name, namelen, (char *)lockid, bit); wait_on_recovery = 1; } @@ -864,8 +864,8 @@ redo_request: * dlm spinlock would be detectable be a change on the mle, * so we only need to clear out the recovery map once. */ if (dlm_is_recovery_lock(lockid, namelen)) { - mlog(ML_NOTICE, "%s: recovery map is not empty, but " - "must master $RECOVERY lock now\n", dlm->name); + mlog(0, "%s: Recovery map is not empty, but must " + "master $RECOVERY lock now\n", dlm->name); if (!dlm_pre_master_reco_lockres(dlm, res)) wait_on_recovery = 0; else { @@ -883,8 +883,8 @@ redo_request: spin_lock(&dlm->spinlock); bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) { - mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to " - "recover before lock mastery can begin\n", + mlog(0, "%s: res %.*s, At least one node (%d) " + "to recover before lock mastery can begin\n", dlm->name, namelen, (char *)lockid, bit); wait_on_recovery = 1; } else @@ -913,8 +913,8 @@ redo_request: * yet, keep going until it does. this is how the * master will know that asserts are needed back to * the lower nodes. */ - mlog(0, "%s:%.*s: requests only up to %u but master " - "is %u, keep going\n", dlm->name, namelen, + mlog(0, "%s: res %.*s, Requests only up to %u but " + "master is %u, keep going\n", dlm->name, namelen, lockid, nodenum, mle->master); } } @@ -924,13 +924,12 @@ wait: ret = dlm_wait_for_lock_mastery(dlm, res, mle, &blocked); if (ret < 0) { wait_on_recovery = 1; - mlog(0, "%s:%.*s: node map changed, redo the " - "master request now, blocked=%d\n", - dlm->name, res->lockname.len, + mlog(0, "%s: res %.*s, Node map changed, redo the master " + "request now, blocked=%d\n", dlm->name, res->lockname.len, res->lockname.name, blocked); if (++tries > 20) { - mlog(ML_ERROR, "%s:%.*s: spinning on " - "dlm_wait_for_lock_mastery, blocked=%d\n", + mlog(ML_ERROR, "%s: res %.*s, Spinning on " + "dlm_wait_for_lock_mastery, blocked = %d\n", dlm->name, res->lockname.len, res->lockname.name, blocked); dlm_print_one_lock_resource(res); @@ -940,7 +939,8 @@ wait: goto redo_request; } - mlog(0, "lockres mastered by %u\n", res->owner); + mlog(0, "%s: res %.*s, Mastered by %u\n", dlm->name, res->lockname.len, + res->lockname.name, res->owner); /* make sure we never continue without this */ BUG_ON(res->owner == O2NM_MAX_NODES); @@ -2187,8 +2187,6 @@ int dlm_drop_lockres_ref(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) namelen = res->lockname.len; BUG_ON(namelen > O2NM_MAX_NAME_LEN); - mlog(0, "%s:%.*s: sending deref to %d\n", - dlm->name, namelen, lockname, res->owner); memset(&deref, 0, sizeof(deref)); deref.node_idx = dlm->node_num; deref.namelen = namelen; @@ -2197,14 +2195,12 @@ int dlm_drop_lockres_ref(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) ret = o2net_send_message(DLM_DEREF_LOCKRES_MSG, dlm->key, &deref, sizeof(deref), res->owner, &r); if (ret < 0) - mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to " - "node %u\n", ret, DLM_DEREF_LOCKRES_MSG, dlm->key, - res->owner); + mlog(ML_ERROR, "%s: res %.*s, error %d send DEREF to node %u\n", + dlm->name, namelen, lockname, ret, res->owner); else if (r < 0) { /* BAD. other node says I did not have a ref. */ - mlog(ML_ERROR,"while dropping ref on %s:%.*s " - "(master=%u) got %d.\n", dlm->name, namelen, - lockname, res->owner, r); + mlog(ML_ERROR, "%s: res %.*s, DEREF to node %u got %d\n", + dlm->name, namelen, lockname, res->owner, r); dlm_print_one_lock_resource(res); BUG(); } @@ -2916,9 +2912,9 @@ static int dlm_do_migrate_request(struct dlm_ctxt *dlm, &migrate, sizeof(migrate), nodenum, &status); if (ret < 0) { - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_MIGRATE_REQUEST_MSG, - dlm->key, nodenum); + mlog(ML_ERROR, "%s: res %.*s, Error %d send " + "MIGRATE_REQUEST to node %u\n", dlm->name, + migrate.namelen, migrate.name, ret, nodenum); if (!dlm_is_host_down(ret)) { mlog(ML_ERROR, "unhandled error=%d!\n", ret); BUG(); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 7efab6d..a3c312c 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -430,6 +430,8 @@ static void dlm_begin_recovery(struct dlm_ctxt *dlm) { spin_lock(&dlm->spinlock); BUG_ON(dlm->reco.state & DLM_RECO_STATE_ACTIVE); + printk(KERN_NOTICE "o2dlm: Begin recovery on domain %s for node %u\n", + dlm->name, dlm->reco.dead_node); dlm->reco.state |= DLM_RECO_STATE_ACTIVE; spin_unlock(&dlm->spinlock); } @@ -440,9 +442,18 @@ static void dlm_end_recovery(struct dlm_ctxt *dlm) BUG_ON(!(dlm->reco.state & DLM_RECO_STATE_ACTIVE)); dlm->reco.state &= ~DLM_RECO_STATE_ACTIVE; spin_unlock(&dlm->spinlock); + printk(KERN_NOTICE "o2dlm: End recovery on domain %s\n", dlm->name); wake_up(&dlm->reco.event); } +static void dlm_print_recovery_master(struct dlm_ctxt *dlm) +{ + printk(KERN_NOTICE "o2dlm: Node %u (%s) is the Recovery Master for the " + "dead node %u in domain %s\n", dlm->reco.new_master, + (dlm->node_num == dlm->reco.new_master ? "me" : "he"), + dlm->reco.dead_node, dlm->name); +} + static int dlm_do_recovery(struct dlm_ctxt *dlm) { int status = 0; @@ -505,9 +516,8 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm) } mlog(0, "another node will master this recovery session.\n"); } - mlog(0, "dlm=%s (%d), new_master=%u, this node=%u, dead_node=%u\n", - dlm->name, task_pid_nr(dlm->dlm_reco_thread_task), dlm->reco.new_master, - dlm->node_num, dlm->reco.dead_node); + + dlm_print_recovery_master(dlm); /* it is safe to start everything back up here * because all of the dead node's lock resources @@ -518,15 +528,13 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm) return 0; master_here: - mlog(ML_NOTICE, "(%d) Node %u is the Recovery Master for the Dead Node " - "%u for Domain %s\n", task_pid_nr(dlm->dlm_reco_thread_task), - dlm->node_num, dlm->reco.dead_node, dlm->name); + dlm_print_recovery_master(dlm); status = dlm_remaster_locks(dlm, dlm->reco.dead_node); if (status < 0) { /* we should never hit this anymore */ - mlog(ML_ERROR, "error %d remastering locks for node %u, " - "retrying.\n", status, dlm->reco.dead_node); + mlog(ML_ERROR, "%s: Error %d remastering locks for node %u, " + "retrying.\n", dlm->name, status, dlm->reco.dead_node); /* yield a bit to allow any final network messages * to get handled on remaining nodes */ msleep(100); @@ -567,7 +575,7 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node) BUG_ON(ndata->state != DLM_RECO_NODE_DATA_INIT); ndata->state = DLM_RECO_NODE_DATA_REQUESTING; - mlog(0, "requesting lock info from node %u\n", + mlog(0, "%s: Requesting lock info from node %u\n", dlm->name, ndata->node_num); if (ndata->node_num == dlm->node_num) { @@ -640,7 +648,7 @@ static int dlm_remaster_locks(struct dlm_ctxt *dlm, u8 dead_node) spin_unlock(&dlm_reco_state_lock); } - mlog(0, "done requesting all lock info\n"); + mlog(0, "%s: Done requesting all lock info\n", dlm->name); /* nodes should be sending reco data now * just need to wait */ @@ -802,10 +810,9 @@ static int dlm_request_all_locks(struct dlm_ctxt *dlm, u8 request_from, /* negative status is handled by caller */ if (ret < 0) - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_LOCK_REQUEST_MSG, - dlm->key, request_from); - + mlog(ML_ERROR, "%s: Error %d send LOCK_REQUEST to node %u " + "to recover dead node %u\n", dlm->name, ret, + request_from, dead_node); // return from here, then // sleep until all received or error return ret; @@ -956,9 +963,9 @@ static int dlm_send_all_done_msg(struct dlm_ctxt *dlm, u8 dead_node, u8 send_to) ret = o2net_send_message(DLM_RECO_DATA_DONE_MSG, dlm->key, &done_msg, sizeof(done_msg), send_to, &tmpret); if (ret < 0) { - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_RECO_DATA_DONE_MSG, - dlm->key, send_to); + mlog(ML_ERROR, "%s: Error %d send RECO_DATA_DONE to node %u " + "to recover dead node %u\n", dlm->name, ret, send_to, + dead_node); if (!dlm_is_host_down(ret)) { BUG(); } @@ -1127,9 +1134,11 @@ static int dlm_send_mig_lockres_msg(struct dlm_ctxt *dlm, if (ret < 0) { /* XXX: negative status is not handled. * this will end up killing this node. */ - mlog(ML_ERROR, "Error %d when sending message %u (key " - "0x%x) to node %u\n", ret, DLM_MIG_LOCKRES_MSG, - dlm->key, send_to); + mlog(ML_ERROR, "%s: res %.*s, Error %d send MIG_LOCKRES to " + "node %u (%s)\n", dlm->name, mres->lockname_len, + mres->lockname, ret, send_to, + (orig_flags & DLM_MRES_MIGRATION ? + "migration" : "recovery")); } else { /* might get an -ENOMEM back here */ ret = status; @@ -2324,9 +2333,9 @@ static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node) dlm_revalidate_lvb(dlm, res, dead_node); if (res->owner == dead_node) { if (res->state & DLM_LOCK_RES_DROPPING_REF) { - mlog(ML_NOTICE, "Ignore %.*s for " + mlog(ML_NOTICE, "%s: res %.*s, Skip " "recovery as it is being freed\n", - res->lockname.len, + dlm->name, res->lockname.len, res->lockname.name); } else dlm_move_lockres_to_recovery_list(dlm, diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 1d6d1d2..46faac2 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -185,8 +185,6 @@ static void dlm_purge_lockres(struct dlm_ctxt *dlm, /* clear our bit from the master's refmap, ignore errors */ ret = dlm_drop_lockres_ref(dlm, res); if (ret < 0) { - mlog(ML_ERROR, "%s: deref %.*s failed %d\n", dlm->name, - res->lockname.len, res->lockname.name, ret); if (!dlm_is_host_down(ret)) BUG(); } -- cgit v0.10.2 From 394eb3d38a3ecc549cc34a3040103a9164be516b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:24:54 -0700 Subject: ocfs2: Clean up messages in stack_o2cb.c o2cb messages needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 19965b0..be935d8 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -263,8 +263,8 @@ static void o2dlm_eviction_cb(int node_num, void *data) { struct ocfs2_cluster_connection *conn = data; - mlog(ML_NOTICE, "o2dlm has evicted node %d from group %.*s\n", - node_num, conn->cc_namelen, conn->cc_name); + printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n", + node_num, conn->cc_namelen, conn->cc_name); conn->cc_recovery_handler(node_num, conn->cc_recovery_data); } -- cgit v0.10.2 From 0afbba13226fcdbd4327f6b13a42f6efbb8c9caf Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:25:54 -0700 Subject: ocfs2/dlm: Cleanup up dlm_finish_local_lockres_recovery() dlm_finish_local_lockres_recovery() needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index a3c312c..41e74f0 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2093,6 +2093,9 @@ static void dlm_finish_local_lockres_recovery(struct dlm_ctxt *dlm, list_for_each_entry_safe(res, next, &dlm->reco.resources, recovering) { if (res->owner == dead_node) { + mlog(0, "%s: res %.*s, Changing owner from %u to %u\n", + dlm->name, res->lockname.len, res->lockname.name, + res->owner, new_master); list_del_init(&res->recovering); spin_lock(&res->spinlock); /* new_master has our reference from @@ -2114,40 +2117,30 @@ static void dlm_finish_local_lockres_recovery(struct dlm_ctxt *dlm, for (i = 0; i < DLM_HASH_BUCKETS; i++) { bucket = dlm_lockres_hash(dlm, i); hlist_for_each_entry(res, hash_iter, bucket, hash_node) { - if (res->state & DLM_LOCK_RES_RECOVERING) { - if (res->owner == dead_node) { - mlog(0, "(this=%u) res %.*s owner=%u " - "was not on recovering list, but " - "clearing state anyway\n", - dlm->node_num, res->lockname.len, - res->lockname.name, new_master); - } else if (res->owner == dlm->node_num) { - mlog(0, "(this=%u) res %.*s owner=%u " - "was not on recovering list, " - "owner is THIS node, clearing\n", - dlm->node_num, res->lockname.len, - res->lockname.name, new_master); - } else - continue; + if (!(res->state & DLM_LOCK_RES_RECOVERING)) + continue; - if (!list_empty(&res->recovering)) { - mlog(0, "%s:%.*s: lockres was " - "marked RECOVERING, owner=%u\n", - dlm->name, res->lockname.len, - res->lockname.name, res->owner); - list_del_init(&res->recovering); - dlm_lockres_put(res); - } - spin_lock(&res->spinlock); - /* new_master has our reference from - * the lock state sent during recovery */ - dlm_change_lockres_owner(dlm, res, new_master); - res->state &= ~DLM_LOCK_RES_RECOVERING; - if (__dlm_lockres_has_locks(res)) - __dlm_dirty_lockres(dlm, res); - spin_unlock(&res->spinlock); - wake_up(&res->wq); + if (res->owner != dead_node && + res->owner != dlm->node_num) + continue; + + if (!list_empty(&res->recovering)) { + list_del_init(&res->recovering); + dlm_lockres_put(res); } + + /* new_master has our reference from + * the lock state sent during recovery */ + mlog(0, "%s: res %.*s, Changing owner from %u to %u\n", + dlm->name, res->lockname.len, res->lockname.name, + res->owner, new_master); + spin_lock(&res->spinlock); + dlm_change_lockres_owner(dlm, res, new_master); + res->state &= ~DLM_LOCK_RES_RECOVERING; + if (__dlm_lockres_has_locks(res)) + __dlm_dirty_lockres(dlm, res); + spin_unlock(&res->spinlock); + wake_up(&res->wq); } } } -- cgit v0.10.2 From 8d400b81cc83b171ff872587723a37eb7fae9abe Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:26:54 -0700 Subject: ocfs2/dlm: Clean up refmap helpers Patch cleans up helpers that set/clear refmap bits and grab/drop inflight lock ref counts. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index d602abb..4a5d580 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -902,46 +902,15 @@ struct dlm_lock_resource *dlm_new_lockres(struct dlm_ctxt *dlm, const char *name, unsigned int namelen); -#define dlm_lockres_set_refmap_bit(bit,res) \ - __dlm_lockres_set_refmap_bit(bit,res,__FILE__,__LINE__) -#define dlm_lockres_clear_refmap_bit(bit,res) \ - __dlm_lockres_clear_refmap_bit(bit,res,__FILE__,__LINE__) - -static inline void __dlm_lockres_set_refmap_bit(int bit, - struct dlm_lock_resource *res, - const char *file, - int line) -{ - //printk("%s:%d:%.*s: setting bit %d\n", file, line, - // res->lockname.len, res->lockname.name, bit); - set_bit(bit, res->refmap); -} - -static inline void __dlm_lockres_clear_refmap_bit(int bit, - struct dlm_lock_resource *res, - const char *file, - int line) -{ - //printk("%s:%d:%.*s: clearing bit %d\n", file, line, - // res->lockname.len, res->lockname.name, bit); - clear_bit(bit, res->refmap); -} - -void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - const char *file, - int line); -void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - int new_lockres, - const char *file, - int line); -#define dlm_lockres_drop_inflight_ref(d,r) \ - __dlm_lockres_drop_inflight_ref(d,r,__FILE__,__LINE__) -#define dlm_lockres_grab_inflight_ref(d,r) \ - __dlm_lockres_grab_inflight_ref(d,r,0,__FILE__,__LINE__) -#define dlm_lockres_grab_inflight_ref_new(d,r) \ - __dlm_lockres_grab_inflight_ref(d,r,1,__FILE__,__LINE__) +void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit); +void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit); + +void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res); +void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res); void dlm_queue_ast(struct dlm_ctxt *dlm, struct dlm_lock *lock); void dlm_queue_bast(struct dlm_ctxt *dlm, struct dlm_lock *lock); diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 9f3b093..11e446ff 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -631,39 +631,58 @@ error: return NULL; } -void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - int new_lockres, - const char *file, - int line) +void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit) { - if (!new_lockres) - assert_spin_locked(&res->spinlock); + assert_spin_locked(&res->spinlock); + + mlog(0, "res %.*s, set node %u, %ps()\n", res->lockname.len, + res->lockname.name, bit, __builtin_return_address(0)); + + set_bit(bit, res->refmap); +} + +void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res, int bit) +{ + assert_spin_locked(&res->spinlock); + + mlog(0, "res %.*s, clr node %u, %ps()\n", res->lockname.len, + res->lockname.name, bit, __builtin_return_address(0)); + + clear_bit(bit, res->refmap); +} + + +void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res) +{ + assert_spin_locked(&res->spinlock); if (!test_bit(dlm->node_num, res->refmap)) { BUG_ON(res->inflight_locks != 0); - dlm_lockres_set_refmap_bit(dlm->node_num, res); + dlm_lockres_set_refmap_bit(dlm, res, dlm->node_num); } res->inflight_locks++; - mlog(0, "%s:%.*s: inflight++: now %u\n", - dlm->name, res->lockname.len, res->lockname.name, - res->inflight_locks); + mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name, + res->lockname.len, res->lockname.name, res->inflight_locks, + __builtin_return_address(0)); } -void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res, - const char *file, - int line) +void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, + struct dlm_lock_resource *res) { assert_spin_locked(&res->spinlock); BUG_ON(res->inflight_locks == 0); + res->inflight_locks--; - mlog(0, "%s:%.*s: inflight--: now %u\n", - dlm->name, res->lockname.len, res->lockname.name, - res->inflight_locks); + mlog(0, "%s: res %.*s, inflight--: now %u, %ps()\n", dlm->name, + res->lockname.len, res->lockname.name, res->inflight_locks, + __builtin_return_address(0)); + if (res->inflight_locks == 0) - dlm_lockres_clear_refmap_bit(dlm->node_num, res); + dlm_lockres_clear_refmap_bit(dlm, res, dlm->node_num); wake_up(&res->wq); } @@ -843,8 +862,10 @@ lookup: /* finally add the lockres to its hash bucket */ __dlm_insert_lockres(dlm, res); - /* since this lockres is new it doesn't not require the spinlock */ - dlm_lockres_grab_inflight_ref_new(dlm, res); + + spin_lock(&res->spinlock); + dlm_lockres_grab_inflight_ref(dlm, res); + spin_unlock(&res->spinlock); /* if this node does not become the master make sure to drop * this inflight reference below */ @@ -1426,9 +1447,7 @@ way_up_top: } if (res->owner == dlm->node_num) { - mlog(0, "%s:%.*s: setting bit %u in refmap\n", - dlm->name, namelen, name, request->node_idx); - dlm_lockres_set_refmap_bit(request->node_idx, res); + dlm_lockres_set_refmap_bit(dlm, res, request->node_idx); spin_unlock(&res->spinlock); response = DLM_MASTER_RESP_YES; if (mle) @@ -1493,10 +1512,8 @@ way_up_top: * go back and clean the mles on any * other nodes */ dispatch_assert = 1; - dlm_lockres_set_refmap_bit(request->node_idx, res); - mlog(0, "%s:%.*s: setting bit %u in refmap\n", - dlm->name, namelen, name, - request->node_idx); + dlm_lockres_set_refmap_bit(dlm, res, + request->node_idx); } else response = DLM_MASTER_RESP_NO; } else { @@ -1702,7 +1719,7 @@ again: "lockres, set the bit in the refmap\n", namelen, lockname, to); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(to, res); + dlm_lockres_set_refmap_bit(dlm, res, to); spin_unlock(&res->spinlock); } } @@ -2256,7 +2273,7 @@ int dlm_deref_lockres_handler(struct o2net_msg *msg, u32 len, void *data, else { BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF); if (test_bit(node, res->refmap)) { - dlm_lockres_clear_refmap_bit(node, res); + dlm_lockres_clear_refmap_bit(dlm, res, node); cleared = 1; } } @@ -2316,7 +2333,7 @@ static void dlm_deref_lockres_worker(struct dlm_work_item *item, void *data) BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF); if (test_bit(node, res->refmap)) { __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG); - dlm_lockres_clear_refmap_bit(node, res); + dlm_lockres_clear_refmap_bit(dlm, res, node); cleared = 1; } spin_unlock(&res->spinlock); @@ -2798,7 +2815,8 @@ static void dlm_remove_nonlocal_locks(struct dlm_ctxt *dlm, BUG_ON(!list_empty(&lock->bast_list)); BUG_ON(lock->ast_pending); BUG_ON(lock->bast_pending); - dlm_lockres_clear_refmap_bit(lock->ml.node, res); + dlm_lockres_clear_refmap_bit(dlm, res, + lock->ml.node); list_del_init(&lock->list); dlm_lock_put(lock); /* In a normal unlock, we would have added a @@ -2819,7 +2837,7 @@ static void dlm_remove_nonlocal_locks(struct dlm_ctxt *dlm, mlog(0, "%s:%.*s: node %u had a ref to this " "migrating lockres, clearing\n", dlm->name, res->lockname.len, res->lockname.name, bit); - dlm_lockres_clear_refmap_bit(bit, res); + dlm_lockres_clear_refmap_bit(dlm, res, bit); } bit++; } @@ -2933,7 +2951,7 @@ static int dlm_do_migrate_request(struct dlm_ctxt *dlm, dlm->name, res->lockname.len, res->lockname.name, nodenum); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(nodenum, res); + dlm_lockres_set_refmap_bit(dlm, res, nodenum); spin_unlock(&res->spinlock); } } @@ -3267,7 +3285,7 @@ int dlm_finish_migration(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, * mastery reference here since old_master will briefly have * a reference after the migration completes */ spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(old_master, res); + dlm_lockres_set_refmap_bit(dlm, res, old_master); spin_unlock(&res->spinlock); mlog(0, "now time to do a migrate request to other nodes\n"); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 41e74f0..f1a3aa8 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1776,7 +1776,7 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm, dlm->name, mres->lockname_len, mres->lockname, from); spin_lock(&res->spinlock); - dlm_lockres_set_refmap_bit(from, res); + dlm_lockres_set_refmap_bit(dlm, res, from); spin_unlock(&res->spinlock); added++; break; @@ -1974,7 +1974,7 @@ skip_lvb: mlog(0, "%s:%.*s: added lock for node %u, " "setting refmap bit\n", dlm->name, res->lockname.len, res->lockname.name, ml->node); - dlm_lockres_set_refmap_bit(ml->node, res); + dlm_lockres_set_refmap_bit(dlm, res, ml->node); added++; } spin_unlock(&res->spinlock); @@ -2254,12 +2254,12 @@ static void dlm_free_dead_locks(struct dlm_ctxt *dlm, res->lockname.len, res->lockname.name, freed, dead_node); __dlm_print_one_lock_resource(res); } - dlm_lockres_clear_refmap_bit(dead_node, res); + dlm_lockres_clear_refmap_bit(dlm, res, dead_node); } else if (test_bit(dead_node, res->refmap)) { mlog(0, "%s:%.*s: dead node %u had a ref, but had " "no locks and had not purged before dying\n", dlm->name, res->lockname.len, res->lockname.name, dead_node); - dlm_lockres_clear_refmap_bit(dead_node, res); + dlm_lockres_clear_refmap_bit(dlm, res, dead_node); } /* do not kick thread yet */ -- cgit v0.10.2 From e9f0b6a6233105c188064328c3f15e21942d0241 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:27:54 -0700 Subject: ocfs2/dlm: Trace insert/remove of resource to/from hash Add mlog to trace adding and removing the resource from/to the hash table. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index 4a5d580..b1748ac 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -877,9 +877,8 @@ static inline void dlm_lockres_get(struct dlm_lock_resource *res) kref_get(&res->refs); } void dlm_lockres_put(struct dlm_lock_resource *res); -void __dlm_unhash_lockres(struct dlm_lock_resource *res); -void __dlm_insert_lockres(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res); +void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res); +void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res); struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm, const char *name, unsigned int len, diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index ce225fb..200d988 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -157,16 +157,18 @@ static int dlm_protocol_compare(struct dlm_protocol_version *existing, static void dlm_unregister_domain_handlers(struct dlm_ctxt *dlm); -void __dlm_unhash_lockres(struct dlm_lock_resource *lockres) +void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) { - if (!hlist_unhashed(&lockres->hash_node)) { - hlist_del_init(&lockres->hash_node); - dlm_lockres_put(lockres); - } + if (hlist_unhashed(&res->hash_node)) + return; + + mlog(0, "%s: Unhash res %.*s\n", dlm->name, res->lockname.len, + res->lockname.name); + hlist_del_init(&res->hash_node); + dlm_lockres_put(res); } -void __dlm_insert_lockres(struct dlm_ctxt *dlm, - struct dlm_lock_resource *res) +void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res) { struct hlist_head *bucket; struct qstr *q; @@ -180,6 +182,9 @@ void __dlm_insert_lockres(struct dlm_ctxt *dlm, dlm_lockres_get(res); hlist_add_head(&res->hash_node, bucket); + + mlog(0, "%s: Hash res %.*s\n", dlm->name, res->lockname.len, + res->lockname.name); } struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm, diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 46faac2..4eff65e 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -207,7 +207,7 @@ static void dlm_purge_lockres(struct dlm_ctxt *dlm, BUG(); } - __dlm_unhash_lockres(res); + __dlm_unhash_lockres(dlm, res); /* lockres is not in the hash now. drop the flag and wake up * any processes waiting in dlm_get_lock_resource. */ -- cgit v0.10.2 From ed8625c6fb93d750ed022db571a8a7b7a6724b3b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:28:54 -0700 Subject: ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() dlm_wait_for_node_death() and dlm_wait_for_node_recovery() needed a facelift. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index b1748ac..a5952ce 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -859,8 +859,8 @@ void dlm_complete_recovery_thread(struct dlm_ctxt *dlm); void dlm_wait_for_recovery(struct dlm_ctxt *dlm); void dlm_kick_recovery_thread(struct dlm_ctxt *dlm); int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node); -int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout); -int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout); +void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout); +void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout); void dlm_put(struct dlm_ctxt *dlm); struct dlm_ctxt *dlm_grab(struct dlm_ctxt *dlm); diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index f1a3aa8..01ebfd0 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -362,40 +362,38 @@ static int dlm_is_node_recovered(struct dlm_ctxt *dlm, u8 node) } -int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout) +void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout) { - if (timeout) { - mlog(ML_NOTICE, "%s: waiting %dms for notification of " - "death of node %u\n", dlm->name, timeout, node); + if (dlm_is_node_dead(dlm, node)) + return; + + printk(KERN_NOTICE "o2dlm: Waiting on the death of node %u in " + "domain %s\n", node, dlm->name); + + if (timeout) wait_event_timeout(dlm->dlm_reco_thread_wq, - dlm_is_node_dead(dlm, node), - msecs_to_jiffies(timeout)); - } else { - mlog(ML_NOTICE, "%s: waiting indefinitely for notification " - "of death of node %u\n", dlm->name, node); + dlm_is_node_dead(dlm, node), + msecs_to_jiffies(timeout)); + else wait_event(dlm->dlm_reco_thread_wq, dlm_is_node_dead(dlm, node)); - } - /* for now, return 0 */ - return 0; } -int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout) +void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout) { - if (timeout) { - mlog(0, "%s: waiting %dms for notification of " - "recovery of node %u\n", dlm->name, timeout, node); + if (dlm_is_node_recovered(dlm, node)) + return; + + printk(KERN_NOTICE "o2dlm: Waiting on the recovery of node %u in " + "domain %s\n", node, dlm->name); + + if (timeout) wait_event_timeout(dlm->dlm_reco_thread_wq, - dlm_is_node_recovered(dlm, node), - msecs_to_jiffies(timeout)); - } else { - mlog(0, "%s: waiting indefinitely for notification " - "of recovery of node %u\n", dlm->name, node); + dlm_is_node_recovered(dlm, node), + msecs_to_jiffies(timeout)); + else wait_event(dlm->dlm_reco_thread_wq, dlm_is_node_recovered(dlm, node)); - } - /* for now, return 0 */ - return 0; } /* callers of the top-level api calls (dlmlock/dlmunlock) should -- cgit v0.10.2 From ff0a522e7db79625aa27a433467eb94c5e255718 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:29:54 -0700 Subject: ocfs2/dlm: Take inflight reference count for remotely mastered resources too The inflight reference count, in the lock resource, is taken to pin the resource in memory. We take it when a new resource is created and release it after a lock is attached to it. We do this to prevent the resource from getting purged prematurely. Earlier this reference count was being taken for locally mastered resources only. This patch extends the same functionality for remotely mastered ones. We are doing this because the same premature purging could occur for remotely mastered resources if the remote node were to die before completion of the create lock. Fix for Oracle bug#12405575. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index c7f3e22..3ef2c1a 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -183,10 +183,6 @@ static enum dlm_status dlmlock_master(struct dlm_ctxt *dlm, kick_thread = 1; } } - /* reduce the inflight count, this may result in the lockres - * being purged below during calc_usage */ - if (lock->ml.node == dlm->node_num) - dlm_lockres_drop_inflight_ref(dlm, res); spin_unlock(&res->spinlock); wake_up(&res->wq); @@ -737,6 +733,14 @@ retry_lock: } } + /* Inflight taken in dlm_get_lock_resource() is dropped here */ + spin_lock(&res->spinlock); + dlm_lockres_drop_inflight_ref(dlm, res); + spin_unlock(&res->spinlock); + + dlm_lockres_calc_usage(dlm, res); + dlm_kick_thread(dlm, res); + if (status != DLM_NORMAL) { lock->lksb->flags &= ~DLM_LKSB_GET_LVB; if (status != DLM_NOTQUEUED) diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 11e446ff..005261c 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -659,11 +659,8 @@ void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm, { assert_spin_locked(&res->spinlock); - if (!test_bit(dlm->node_num, res->refmap)) { - BUG_ON(res->inflight_locks != 0); - dlm_lockres_set_refmap_bit(dlm, res, dlm->node_num); - } res->inflight_locks++; + mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name, res->lockname.len, res->lockname.name, res->inflight_locks, __builtin_return_address(0)); @@ -677,12 +674,11 @@ void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm, BUG_ON(res->inflight_locks == 0); res->inflight_locks--; + mlog(0, "%s: res %.*s, inflight--: now %u, %ps()\n", dlm->name, res->lockname.len, res->lockname.name, res->inflight_locks, __builtin_return_address(0)); - if (res->inflight_locks == 0) - dlm_lockres_clear_refmap_bit(dlm, res, dlm->node_num); wake_up(&res->wq); } @@ -716,7 +712,6 @@ struct dlm_lock_resource * dlm_get_lock_resource(struct dlm_ctxt *dlm, unsigned int hash; int tries = 0; int bit, wait_on_recovery = 0; - int drop_inflight_if_nonlocal = 0; BUG_ON(!lockid); @@ -728,36 +723,33 @@ lookup: spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { - int dropping_ref = 0; - spin_unlock(&dlm->spinlock); - spin_lock(&tmpres->spinlock); - /* We wait for the other thread that is mastering the resource */ + /* Wait on the thread that is mastering the resource */ if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) { __dlm_wait_on_lockres(tmpres); BUG_ON(tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN); + spin_unlock(&tmpres->spinlock); + dlm_lockres_put(tmpres); + tmpres = NULL; + goto lookup; } - if (tmpres->owner == dlm->node_num) { - BUG_ON(tmpres->state & DLM_LOCK_RES_DROPPING_REF); - dlm_lockres_grab_inflight_ref(dlm, tmpres); - } else if (tmpres->state & DLM_LOCK_RES_DROPPING_REF) - dropping_ref = 1; - spin_unlock(&tmpres->spinlock); - - /* wait until done messaging the master, drop our ref to allow - * the lockres to be purged, start over. */ - if (dropping_ref) { - spin_lock(&tmpres->spinlock); - __dlm_wait_on_lockres_flags(tmpres, DLM_LOCK_RES_DROPPING_REF); + /* Wait on the resource purge to complete before continuing */ + if (tmpres->state & DLM_LOCK_RES_DROPPING_REF) { + BUG_ON(tmpres->owner == dlm->node_num); + __dlm_wait_on_lockres_flags(tmpres, + DLM_LOCK_RES_DROPPING_REF); spin_unlock(&tmpres->spinlock); dlm_lockres_put(tmpres); tmpres = NULL; goto lookup; } - mlog(0, "found in hash!\n"); + /* Grab inflight ref to pin the resource */ + dlm_lockres_grab_inflight_ref(dlm, tmpres); + + spin_unlock(&tmpres->spinlock); if (res) dlm_lockres_put(res); res = tmpres; @@ -863,14 +855,11 @@ lookup: /* finally add the lockres to its hash bucket */ __dlm_insert_lockres(dlm, res); + /* Grab inflight ref to pin the resource */ spin_lock(&res->spinlock); dlm_lockres_grab_inflight_ref(dlm, res); spin_unlock(&res->spinlock); - /* if this node does not become the master make sure to drop - * this inflight reference below */ - drop_inflight_if_nonlocal = 1; - /* get an extra ref on the mle in case this is a BLOCK * if so, the creator of the BLOCK may try to put the last * ref at this time in the assert master handler, so we @@ -973,8 +962,6 @@ wait: wake_waiters: spin_lock(&res->spinlock); - if (res->owner != dlm->node_num && drop_inflight_if_nonlocal) - dlm_lockres_drop_inflight_ref(dlm, res); res->state &= ~DLM_LOCK_RES_IN_PROGRESS; spin_unlock(&res->spinlock); wake_up(&res->wq); diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index 4eff65e..e73c833 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -94,24 +94,26 @@ int __dlm_lockres_unused(struct dlm_lock_resource *res) { int bit; + assert_spin_locked(&res->spinlock); + if (__dlm_lockres_has_locks(res)) return 0; + /* Locks are in the process of being created */ + if (res->inflight_locks) + return 0; + if (!list_empty(&res->dirty) || res->state & DLM_LOCK_RES_DIRTY) return 0; if (res->state & DLM_LOCK_RES_RECOVERING) return 0; + /* Another node has this resource with this node as the master */ bit = find_next_bit(res->refmap, O2NM_MAX_NODES, 0); if (bit < O2NM_MAX_NODES) return 0; - /* - * since the bit for dlm->node_num is not set, inflight_locks better - * be zero - */ - BUG_ON(res->inflight_locks != 0); return 1; } -- cgit v0.10.2 From a2c0cc1579176bd0808ef7deea456767dfa80217 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:30:54 -0700 Subject: ocfs2/dlm: dlmlock_remote() needs to account for remastery In dlmlock_remote(), we wait for the resource to stop being active before setting the inprogress flag. Active includes recovery, migration, etc. The problem here is that if the resource was being recovered or migrated, the new owner could very well be that node itself (and thus not a remote node). This problem was observed in Oracle bug#12583620. The error messages observed were as follows: dlm_send_remote_lock_request:337 ERROR: Error -40 (ELOOP) when sending message 503 (key 0xd6d8c7) to node 2 dlmlock_remote:271 ERROR: dlm status = DLM_BADARGS dlmlock:751 ERROR: dlm status = DLM_BADARGS Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index 3ef2c1a..f32fcba 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -227,10 +227,16 @@ static enum dlm_status dlmlock_remote(struct dlm_ctxt *dlm, lock->ml.type, res->lockname.len, res->lockname.name, flags); + /* + * Wait if resource is getting recovered, remastered, etc. + * If the resource was remastered and new owner is self, then exit. + */ spin_lock(&res->spinlock); - - /* will exit this call with spinlock held */ __dlm_wait_on_lockres(res); + if (res->owner == dlm->node_num) { + spin_unlock(&res->spinlock); + return DLM_RECOVERING; + } res->state |= DLM_LOCK_RES_IN_PROGRESS; /* add lock to local (secondary) queue */ @@ -710,18 +716,10 @@ retry_lock: if (status == DLM_RECOVERING || status == DLM_MIGRATING || status == DLM_FORWARD) { - mlog(0, "retrying lock with migration/" - "recovery/in progress\n"); msleep(100); - /* no waiting for dlm_reco_thread */ if (recovery) { if (status != DLM_RECOVERING) goto retry_lock; - - mlog(0, "%s: got RECOVERING " - "for $RECOVERY lock, master " - "was %u\n", dlm->name, - res->owner); /* wait to see the node go down, then * drop down and allow the lockres to * get cleaned up. need to remaster. */ -- cgit v0.10.2 From bb570a5d9e74f71d32751823052db4a97d6a5e7c Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:31:54 -0700 Subject: ocfs2/cluster: Fix output in file elapsed_time_in_ms The o2hb debugfs file, elapsed_time_in_ms, should return values only after the timer is armed atleast once. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 4728a74..a4e855e 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -1198,6 +1198,7 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) struct o2hb_debug_buf *db = inode->i_private; struct o2hb_region *reg; unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned long lts; char *buf = NULL; int i = -1; int out = 0; @@ -1234,9 +1235,11 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) case O2HB_DB_TYPE_REGION_ELAPSED_TIME: reg = (struct o2hb_region *)db->db_data; - out += snprintf(buf + out, PAGE_SIZE - out, "%u\n", - jiffies_to_msecs(jiffies - - reg->hr_last_timeout_start)); + lts = reg->hr_last_timeout_start; + /* If 0, it has never been set before */ + if (lts) + lts = jiffies_to_msecs(jiffies - lts); + out += snprintf(buf + out, PAGE_SIZE - out, "%lu\n", lts); goto done; case O2HB_DB_TYPE_REGION_PINNED: -- cgit v0.10.2 From 3ba169ccec1c5ad0f678e04fd29b990197fdfe79 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:32:54 -0700 Subject: ocfs2/cluster: Add new function o2net_fill_node_map() Patch adds function o2net_fill_node_map() to return the bitmap of nodes that it is connected to. This bitmap is also accessible by the user via the debugfs file, /sys/kernel/debug/o2net/connected_nodes. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index 3a583590..dc45deb 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -47,6 +47,7 @@ #define SC_DEBUG_NAME "sock_containers" #define NST_DEBUG_NAME "send_tracking" #define STATS_DEBUG_NAME "stats" +#define NODES_DEBUG_NAME "connected_nodes" #define SHOW_SOCK_CONTAINERS 0 #define SHOW_SOCK_STATS 1 @@ -55,6 +56,7 @@ static struct dentry *o2net_dentry; static struct dentry *sc_dentry; static struct dentry *nst_dentry; static struct dentry *stats_dentry; +static struct dentry *nodes_dentry; static DEFINE_SPINLOCK(o2net_debug_lock); @@ -491,53 +493,87 @@ static const struct file_operations sc_seq_fops = { .release = sc_fop_release, }; -int o2net_debugfs_init(void) +static int o2net_fill_bitmap(char *buf, int len) { - o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL); - if (!o2net_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)]; + int i = -1, out = 0; - nst_dentry = debugfs_create_file(NST_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &nst_seq_fops); - if (!nst_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + o2net_fill_node_map(map, sizeof(map)); - sc_dentry = debugfs_create_file(SC_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &sc_seq_fops); - if (!sc_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + while ((i = find_next_bit(map, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) + out += snprintf(buf + out, PAGE_SIZE - out, "%d ", i); + out += snprintf(buf + out, PAGE_SIZE - out, "\n"); - stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, S_IFREG|S_IRUSR, - o2net_dentry, NULL, - &stats_seq_fops); - if (!stats_dentry) { - mlog_errno(-ENOMEM); - goto bail; - } + return out; +} + +static int nodes_fop_open(struct inode *inode, struct file *file) +{ + char *buf; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + i_size_write(inode, o2net_fill_bitmap(buf, PAGE_SIZE)); + + file->private_data = buf; return 0; -bail: - debugfs_remove(stats_dentry); - debugfs_remove(sc_dentry); - debugfs_remove(nst_dentry); - debugfs_remove(o2net_dentry); - return -ENOMEM; } +static int o2net_debug_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static ssize_t o2net_debug_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + return simple_read_from_buffer(buf, nbytes, ppos, file->private_data, + i_size_read(file->f_mapping->host)); +} + +static const struct file_operations nodes_fops = { + .open = nodes_fop_open, + .release = o2net_debug_release, + .read = o2net_debug_read, + .llseek = generic_file_llseek, +}; + void o2net_debugfs_exit(void) { + debugfs_remove(nodes_dentry); debugfs_remove(stats_dentry); debugfs_remove(sc_dentry); debugfs_remove(nst_dentry); debugfs_remove(o2net_dentry); } +int o2net_debugfs_init(void) +{ + mode_t mode = S_IFREG|S_IRUSR; + + o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL); + if (o2net_dentry) + nst_dentry = debugfs_create_file(NST_DEBUG_NAME, mode, + o2net_dentry, NULL, &nst_seq_fops); + if (nst_dentry) + sc_dentry = debugfs_create_file(SC_DEBUG_NAME, mode, + o2net_dentry, NULL, &sc_seq_fops); + if (sc_dentry) + stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, mode, + o2net_dentry, NULL, &stats_seq_fops); + if (stats_dentry) + nodes_dentry = debugfs_create_file(NODES_DEBUG_NAME, mode, + o2net_dentry, NULL, &nodes_fops); + if (nodes_dentry) + return 0; + + o2net_debugfs_exit(); + mlog_errno(-ENOMEM); + return -ENOMEM; +} + #endif /* CONFIG_DEBUG_FS */ diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 6e97895..ae13d5c 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -1034,6 +1034,25 @@ static int o2net_tx_can_proceed(struct o2net_node *nn, return ret; } +/* Get a map of all nodes to which this node is currently connected to */ +void o2net_fill_node_map(unsigned long *map, unsigned bytes) +{ + struct o2net_sock_container *sc; + int node, ret; + + BUG_ON(bytes < (BITS_TO_LONGS(O2NM_MAX_NODES) * sizeof(unsigned long))); + + memset(map, 0, bytes); + for (node = 0; node < O2NM_MAX_NODES; ++node) { + o2net_tx_can_proceed(o2net_nn_from_num(node), &sc, &ret); + if (!ret) { + set_bit(node, map); + sc_put(sc); + } + } +} +EXPORT_SYMBOL_GPL(o2net_fill_node_map); + int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec, size_t caller_veclen, u8 target_node, int *status) { diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h index fd6179e..5bada2a 100644 --- a/fs/ocfs2/cluster/tcp.h +++ b/fs/ocfs2/cluster/tcp.h @@ -106,6 +106,8 @@ int o2net_register_handler(u32 msg_type, u32 key, u32 max_len, struct list_head *unreg_list); void o2net_unregister_handler_list(struct list_head *list); +void o2net_fill_node_map(unsigned long *map, unsigned bytes); + struct o2nm_node; int o2net_register_hb_callbacks(void); void o2net_unregister_hb_callbacks(void); -- cgit v0.10.2 From 6b27f62fc750d85bc6fc3718b3b38ec60edc2d74 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:33:54 -0700 Subject: ocfs2/cluster: Cluster up now includes network connections too The cluster up check only checks to see if the node is heartbeating or not. If yes it continues assuming that the node is connected to all the nodes. But if that is not the case, the cluster join aborts with a stack of errors that are not easy to comprehend. This patch adds the network connect check upfront and prints the nodes that the node is not yet connected to, before aborting. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 200d988..92f2ead 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -2138,13 +2138,6 @@ struct dlm_ctxt * dlm_register_domain(const char *domain, goto leave; } - if (!o2hb_check_local_node_heartbeating()) { - mlog(ML_ERROR, "the local node has not been configured, or is " - "not heartbeating\n"); - ret = -EPROTO; - goto leave; - } - mlog(0, "register called for domain \"%s\"\n", domain); retry: diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index be935d8..9436801 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -28,6 +28,7 @@ #include "cluster/masklog.h" #include "cluster/nodemanager.h" #include "cluster/heartbeat.h" +#include "cluster/tcp.h" #include "stackglue.h" @@ -256,6 +257,61 @@ static void o2cb_dump_lksb(struct ocfs2_dlm_lksb *lksb) } /* + * Check if this node is heartbeating and is connected to all other + * heartbeating nodes. + */ +static int o2cb_cluster_check(void) +{ + u8 node_num; + int i; + unsigned long hbmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned long netmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; + + node_num = o2nm_this_node(); + if (node_num == O2NM_MAX_NODES) { + printk(KERN_ERR "o2cb: This node has not been configured.\n"); + return -EINVAL; + } + + /* + * o2dlm expects o2net sockets to be created. If not, then + * dlm_join_domain() fails with a stack of errors which are both cryptic + * and incomplete. The idea here is to detect upfront whether we have + * managed to connect to all nodes or not. If not, then list the nodes + * to allow the user to check the configuration (incorrect IP, firewall, + * etc.) Yes, this is racy. But its not the end of the world. + */ +#define O2CB_MAP_STABILIZE_COUNT 60 + for (i = 0; i < O2CB_MAP_STABILIZE_COUNT; ++i) { + o2hb_fill_node_map(hbmap, sizeof(hbmap)); + if (!test_bit(node_num, hbmap)) { + printk(KERN_ERR "o2cb: %s heartbeat has not been " + "started.\n", (o2hb_global_heartbeat_active() ? + "Global" : "Local")); + return -EINVAL; + } + o2net_fill_node_map(netmap, sizeof(netmap)); + /* Force set the current node to allow easy compare */ + set_bit(node_num, netmap); + if (!memcmp(hbmap, netmap, sizeof(hbmap))) + return 0; + if (i < O2CB_MAP_STABILIZE_COUNT) + msleep(1000); + } + + printk(KERN_ERR "o2cb: This node could not connect to nodes:"); + i = -1; + while ((i = find_next_bit(hbmap, O2NM_MAX_NODES, + i + 1)) < O2NM_MAX_NODES) { + if (!test_bit(i, netmap)) + printk(" %u", i); + } + printk(".\n"); + + return -ENOTCONN; +} + +/* * Called from the dlm when it's about to evict a node. This is how the * classic stack signals node death. */ @@ -280,12 +336,11 @@ static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) BUG_ON(conn == NULL); BUG_ON(conn->cc_proto == NULL); - /* for now we only have one cluster/node, make sure we see it - * in the heartbeat universe */ - if (!o2hb_check_local_node_heartbeating()) { - if (o2hb_global_heartbeat_active()) - mlog(ML_ERROR, "Global heartbeat not started\n"); - rc = -EINVAL; + /* Ensure cluster stack is up and all nodes are connected */ + rc = o2cb_cluster_check(); + if (rc) { + printk(KERN_ERR "o2cb: Cluster check failed. Fix errors " + "before retrying.\n"); goto out; } -- cgit v0.10.2 From 619c200de144b44f5e405305241bcd7edbb8c6cf Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:34:54 -0700 Subject: ocfs2: Clean up messages in the fs Convert useful messages from ML_NOTICE to KERN_NOTICE to improve readability. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 295d564..8eaaa78 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1544,9 +1544,9 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, /* we need to run complete recovery for offline orphan slots */ ocfs2_replay_map_set_state(osb, REPLAY_NEEDED); - mlog(ML_NOTICE, "Recovering node %d from slot %d on device (%u,%u)\n", - node_num, slot_num, - MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev)); + printk(KERN_NOTICE "ocfs2: Begin replay journal (node %d, slot %d) on "\ + "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev), + MINOR(osb->sb->s_dev)); OCFS2_I(inode)->ip_clusters = le32_to_cpu(fe->i_clusters); @@ -1601,6 +1601,9 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, jbd2_journal_destroy(journal); + printk(KERN_NOTICE "ocfs2: End replay journal (node %d, slot %d) on "\ + "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev), + MINOR(osb->sb->s_dev)); done: /* drop the lock on this nodes journal */ if (got_lock) diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c index dc8007f..942fd65 100644 --- a/fs/ocfs2/quota_local.c +++ b/fs/ocfs2/quota_local.c @@ -404,7 +404,9 @@ struct ocfs2_quota_recovery *ocfs2_begin_quota_recovery( int status = 0; struct ocfs2_quota_recovery *rec; - mlog(ML_NOTICE, "Beginning quota recovery in slot %u\n", slot_num); + printk(KERN_NOTICE "ocfs2: Beginning quota recovery on device (%s) for " + "slot %u\n", osb->dev_str, slot_num); + rec = ocfs2_alloc_quota_recovery(); if (!rec) return ERR_PTR(-ENOMEM); @@ -596,7 +598,9 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb, struct inode *lqinode; unsigned int flags; - mlog(ML_NOTICE, "Finishing quota recovery in slot %u\n", slot_num); + printk(KERN_NOTICE "ocfs2: Finishing quota recovery on device (%s) for " + "slot %u\n", osb->dev_str, slot_num); + mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); for (type = 0; type < MAXQUOTAS; type++) { if (list_empty(&(rec->r_list[type]))) @@ -612,8 +616,9 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb, /* Someone else is holding the lock? Then he must be * doing the recovery. Just skip the file... */ if (status == -EAGAIN) { - mlog(ML_NOTICE, "skipping quota recovery for slot %d " - "because quota file is locked.\n", slot_num); + printk(KERN_NOTICE "ocfs2: Skipping quota recovery on " + "device (%s) for slot %d because quota file is " + "locked.\n", osb->dev_str, slot_num); status = 0; goto out_put; } else if (status < 0) { diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c index 26fc001..1424c15 100644 --- a/fs/ocfs2/slot_map.c +++ b/fs/ocfs2/slot_map.c @@ -493,8 +493,8 @@ int ocfs2_find_slot(struct ocfs2_super *osb) goto bail; } } else - mlog(ML_NOTICE, "slot %d is already allocated to this node!\n", - slot); + printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already " + "allocated to this node!\n", slot, osb->dev_str); ocfs2_set_slot(si, slot, osb->node_num); osb->slot_num = slot; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 56f6102..3e78503 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1107,9 +1107,9 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) ocfs2_set_ro_flag(osb, 1); - printk(KERN_NOTICE "Readonly device detected. No cluster " - "services will be utilized for this mount. Recovery " - "will be skipped.\n"); + printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. " + "Cluster services will not be used for this mount. " + "Recovery will be skipped.\n", osb->dev_str); } if (!ocfs2_is_hard_readonly(osb)) { @@ -2462,8 +2462,8 @@ static int ocfs2_check_volume(struct ocfs2_super *osb) goto finally; } } else { - mlog(ML_NOTICE, "File system was not unmounted cleanly, " - "recovering volume.\n"); + printk(KERN_NOTICE "ocfs2: File system on device (%s) was not " + "unmounted cleanly, recovering it.\n", osb->dev_str); } local = ocfs2_mount_local(osb); -- cgit v0.10.2 From a035bff6b82aca89c1223e2c614adc2d17ec8aa2 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Sun, 24 Jul 2011 10:35:54 -0700 Subject: ocfs2: Add comment about orphan scanning Add a comment that explains the reason as to why orphan scan scans all the slots. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 8eaaa78..0a42ae9 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1811,6 +1811,20 @@ static inline unsigned long ocfs2_orphan_scan_timeout(void) * every slot, queuing a recovery of the slot on the ocfs2_wq thread. This * is done to catch any orphans that are left over in orphan directories. * + * It scans all slots, even ones that are in use. It does so to handle the + * case described below: + * + * Node 1 has an inode it was using. The dentry went away due to memory + * pressure. Node 1 closes the inode, but it's on the free list. The node + * has the open lock. + * Node 2 unlinks the inode. It grabs the dentry lock to notify others, + * but node 1 has no dentry and doesn't get the message. It trylocks the + * open lock, sees that another node has a PR, and does nothing. + * Later node 2 runs its orphan dir. It igets the inode, trylocks the + * open lock, sees the PR still, and does nothing. + * Basically, we have to trigger an orphan iput on node 1. The only way + * for this to happen is if node 1 runs node 2's orphan dir. + * * ocfs2_queue_orphan_scan gets called every ORPHAN_SCAN_SCHEDULE_TIMEOUT * seconds. It gets an EX lock on os_lockres and checks sequence number * stored in LVB. If the sequence number has changed, it means some other -- cgit v0.10.2 From 5cffff9e29866a3de98c2c25135b3199491f93b0 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Sun, 24 Jul 2011 10:36:54 -0700 Subject: ocfs2: Fix ocfs2_page_mkwrite() This patch address two shortcomings in ocfs2_page_mkwrite(): 1. Makes the function return better VM_FAULT_* errors. 2. It handles a error that is triggered when a page is dropped from the mapping due to memory pressure. This patch locks the page to prevent that. [Patch was cleaned up by Sunil Mushran.] Signed-off-by: Wengang Wang Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index c1efe93..ff98c16 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -863,6 +863,12 @@ struct ocfs2_write_ctxt { struct page *w_target_page; /* + * w_target_locked is used for page_mkwrite path indicating no unlocking + * against w_target_page in ocfs2_write_end_nolock. + */ + unsigned int w_target_locked:1; + + /* * ocfs2_write_end() uses this to know what the real range to * write in the target should be. */ @@ -895,6 +901,24 @@ void ocfs2_unlock_and_free_pages(struct page **pages, int num_pages) static void ocfs2_free_write_ctxt(struct ocfs2_write_ctxt *wc) { + int i; + + /* + * w_target_locked is only set to true in the page_mkwrite() case. + * The intent is to allow us to lock the target page from write_begin() + * to write_end(). The caller must hold a ref on w_target_page. + */ + if (wc->w_target_locked) { + BUG_ON(!wc->w_target_page); + for (i = 0; i < wc->w_num_pages; i++) { + if (wc->w_target_page == wc->w_pages[i]) { + wc->w_pages[i] = NULL; + break; + } + } + mark_page_accessed(wc->w_target_page); + page_cache_release(wc->w_target_page); + } ocfs2_unlock_and_free_pages(wc->w_pages, wc->w_num_pages); brelse(wc->w_di_bh); @@ -1132,20 +1156,17 @@ static int ocfs2_grab_pages_for_write(struct address_space *mapping, */ lock_page(mmap_page); + /* Exit and let the caller retry */ if (mmap_page->mapping != mapping) { + WARN_ON(mmap_page->mapping); unlock_page(mmap_page); - /* - * Sanity check - the locking in - * ocfs2_pagemkwrite() should ensure - * that this code doesn't trigger. - */ - ret = -EINVAL; - mlog_errno(ret); + ret = -EAGAIN; goto out; } page_cache_get(mmap_page); wc->w_pages[i] = mmap_page; + wc->w_target_locked = true; } else { wc->w_pages[i] = find_or_create_page(mapping, index, GFP_NOFS); @@ -1160,6 +1181,8 @@ static int ocfs2_grab_pages_for_write(struct address_space *mapping, wc->w_target_page = wc->w_pages[i]; } out: + if (ret) + wc->w_target_locked = false; return ret; } @@ -1817,11 +1840,23 @@ try_again: */ ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len, cluster_of_pages, mmap_page); - if (ret) { + if (ret && ret != -EAGAIN) { mlog_errno(ret); goto out_quota; } + /* + * ocfs2_grab_pages_for_write() returns -EAGAIN if it could not lock + * the target page. In this case, we exit with no error and no target + * page. This will trigger the caller, page_mkwrite(), to re-try + * the operation. + */ + if (ret == -EAGAIN) { + BUG_ON(wc->w_target_page); + ret = 0; + goto out_quota; + } + ret = ocfs2_write_cluster_by_desc(mapping, data_ac, meta_ac, wc, pos, len); if (ret) { diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 3e9393c..9cd4108 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -61,7 +61,7 @@ static int ocfs2_fault(struct vm_area_struct *area, struct vm_fault *vmf) static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, struct page *page) { - int ret; + int ret = VM_FAULT_NOPAGE; struct inode *inode = file->f_path.dentry->d_inode; struct address_space *mapping = inode->i_mapping; loff_t pos = page_offset(page); @@ -71,32 +71,25 @@ static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, void *fsdata; loff_t size = i_size_read(inode); - /* - * Another node might have truncated while we were waiting on - * cluster locks. - * We don't check size == 0 before the shift. This is borrowed - * from do_generic_file_read. - */ last_index = (size - 1) >> PAGE_CACHE_SHIFT; - if (unlikely(!size || page->index > last_index)) { - ret = -EINVAL; - goto out; - } /* - * The i_size check above doesn't catch the case where nodes - * truncated and then re-extended the file. We'll re-check the - * page mapping after taking the page lock inside of - * ocfs2_write_begin_nolock(). + * There are cases that lead to the page no longer bebongs to the + * mapping. + * 1) pagecache truncates locally due to memory pressure. + * 2) pagecache truncates when another is taking EX lock against + * inode lock. see ocfs2_data_convert_worker. + * + * The i_size check doesn't catch the case where nodes truncated and + * then re-extended the file. We'll re-check the page mapping after + * taking the page lock inside of ocfs2_write_begin_nolock(). + * + * Let VM retry with these cases. */ - if (!PageUptodate(page) || page->mapping != inode->i_mapping) { - /* - * the page has been umapped in ocfs2_data_downconvert_worker. - * So return 0 here and let VFS retry. - */ - ret = 0; + if ((page->mapping != inode->i_mapping) || + (!PageUptodate(page)) || + (page_offset(page) >= size)) goto out; - } /* * Call ocfs2_write_begin() and ocfs2_write_end() to take @@ -116,17 +109,21 @@ static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, if (ret) { if (ret != -ENOSPC) mlog_errno(ret); + if (ret == -ENOMEM) + ret = VM_FAULT_OOM; + else + ret = VM_FAULT_SIGBUS; goto out; } - ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page, - fsdata); - if (ret < 0) { - mlog_errno(ret); + if (!locked_page) { + ret = VM_FAULT_NOPAGE; goto out; } + ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page, + fsdata); BUG_ON(ret != len); - ret = 0; + ret = VM_FAULT_LOCKED; out: return ret; } @@ -168,8 +165,6 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) out: ocfs2_unblock_signals(&oldset); - if (ret) - ret = VM_FAULT_SIGBUS; return ret; } -- cgit v0.10.2 From 93862d5e1ab875664c6cc95254fc365028a48bb1 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jul 2011 14:58:15 -0700 Subject: ocfs2: Implement llseek() ocfs2 implements its own llseek() to provide the SEEK_HOLE/SEEK_DATA functionality. SEEK_HOLE sets the file pointer to the start of either a hole or an unwritten (preallocated) extent, that is greater than or equal to the supplied offset. SEEK_DATA sets the file pointer to the start of an allocated extent (not unwritten) that is greater than or equal to the supplied offset. If the supplied offset is on a desired region, then the file pointer is set to it. Offsets greater than or equal to the file size return -ENXIO. Unwritten (preallocated) extents are considered holes because the file system treats reads to such regions in the same way as it does to holes. Signed-off-by: Sunil Mushran diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 23457b4..2f5b92e 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -832,6 +832,102 @@ out: return ret; } +int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin) +{ + struct inode *inode = file->f_mapping->host; + int ret; + unsigned int is_last = 0, is_data = 0; + u16 cs_bits = OCFS2_SB(inode->i_sb)->s_clustersize_bits; + u32 cpos, cend, clen, hole_size; + u64 extoff, extlen; + struct buffer_head *di_bh = NULL; + struct ocfs2_extent_rec rec; + + BUG_ON(origin != SEEK_DATA && origin != SEEK_HOLE); + + ret = ocfs2_inode_lock(inode, &di_bh, 0); + if (ret) { + mlog_errno(ret); + goto out; + } + + down_read(&OCFS2_I(inode)->ip_alloc_sem); + + if (*offset >= inode->i_size) { + ret = -ENXIO; + goto out_unlock; + } + + if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { + if (origin == SEEK_HOLE) + *offset = inode->i_size; + goto out_unlock; + } + + clen = 0; + cpos = *offset >> cs_bits; + cend = ocfs2_clusters_for_bytes(inode->i_sb, inode->i_size); + + while (cpos < cend && !is_last) { + ret = ocfs2_get_clusters_nocache(inode, di_bh, cpos, &hole_size, + &rec, &is_last); + if (ret) { + mlog_errno(ret); + goto out_unlock; + } + + extoff = cpos; + extoff <<= cs_bits; + + if (rec.e_blkno == 0ULL) { + clen = hole_size; + is_data = 0; + } else { + clen = le16_to_cpu(rec.e_leaf_clusters) - + (cpos - le32_to_cpu(rec.e_cpos)); + is_data = (rec.e_flags & OCFS2_EXT_UNWRITTEN) ? 0 : 1; + } + + if ((!is_data && origin == SEEK_HOLE) || + (is_data && origin == SEEK_DATA)) { + if (extoff > *offset) + *offset = extoff; + goto out_unlock; + } + + if (!is_last) + cpos += clen; + } + + if (origin == SEEK_HOLE) { + extoff = cpos; + extoff <<= cs_bits; + extlen = clen; + extlen <<= cs_bits; + + if ((extoff + extlen) > inode->i_size) + extlen = inode->i_size - extoff; + extoff += extlen; + if (extoff > *offset) + *offset = extoff; + goto out_unlock; + } + + ret = -ENXIO; + +out_unlock: + + brelse(di_bh); + + up_read(&OCFS2_I(inode)->ip_alloc_sem); + + ocfs2_inode_unlock(inode, 0); +out: + if (ret && ret != -ENXIO) + ret = -ENXIO; + return ret; +} + int ocfs2_read_virt_blocks(struct inode *inode, u64 v_block, int nr, struct buffer_head *bhs[], int flags, int (*validate)(struct super_block *sb, diff --git a/fs/ocfs2/extent_map.h b/fs/ocfs2/extent_map.h index e79d41c..67ea57d 100644 --- a/fs/ocfs2/extent_map.h +++ b/fs/ocfs2/extent_map.h @@ -53,6 +53,8 @@ int ocfs2_extent_map_get_blocks(struct inode *inode, u64 v_blkno, u64 *p_blkno, int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u64 map_start, u64 map_len); +int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin); + int ocfs2_xattr_get_clusters(struct inode *inode, u32 v_cluster, u32 *p_cluster, u32 *num_clusters, struct ocfs2_extent_list *el, diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 0fc2bd3..c0f015e 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2591,6 +2591,57 @@ bail: return ret; } +/* Refer generic_file_llseek_unlocked() */ +static loff_t ocfs2_file_llseek(struct file *file, loff_t offset, int origin) +{ + struct inode *inode = file->f_mapping->host; + int ret = 0; + + mutex_lock(&inode->i_mutex); + + switch (origin) { + case SEEK_SET: + break; + case SEEK_END: + offset += inode->i_size; + break; + case SEEK_CUR: + if (offset == 0) { + offset = file->f_pos; + goto out; + } + offset += file->f_pos; + break; + case SEEK_DATA: + case SEEK_HOLE: + ret = ocfs2_seek_data_hole_offset(file, &offset, origin); + if (ret) + goto out; + break; + default: + ret = -EINVAL; + goto out; + } + + if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) + ret = -EINVAL; + if (!ret && offset > inode->i_sb->s_maxbytes) + ret = -EINVAL; + if (ret) + goto out; + + if (offset != file->f_pos) { + file->f_pos = offset; + file->f_version = 0; + } + +out: + mutex_unlock(&inode->i_mutex); + if (ret) + return ret; + return offset; +} + const struct inode_operations ocfs2_file_iops = { .setattr = ocfs2_setattr, .getattr = ocfs2_getattr, @@ -2615,7 +2666,7 @@ const struct inode_operations ocfs2_special_file_iops = { * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks! */ const struct file_operations ocfs2_fops = { - .llseek = generic_file_llseek, + .llseek = ocfs2_file_llseek, .read = do_sync_read, .write = do_sync_write, .mmap = ocfs2_mmap, @@ -2663,7 +2714,7 @@ const struct file_operations ocfs2_dops = { * the cluster. */ const struct file_operations ocfs2_fops_no_plocks = { - .llseek = generic_file_llseek, + .llseek = ocfs2_file_llseek, .read = do_sync_read, .write = do_sync_write, .mmap = ocfs2_mmap, -- cgit v0.10.2 From a11f7e63c59810a81494d4c4b028af707d4c7ca4 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 22 Jun 2011 14:23:38 -0700 Subject: ocfs2: serialize unaligned aio Fix a corruption that can happen when we have (two or more) outstanding aio's to an overlapping unaligned region. Ext4 (e9e3bcecf44c04b9e6b505fd8e2eb9cea58fb94d) and xfs recently had to fix similar issues. In our case what happens is that we can have an outstanding aio on a region and if a write comes in with some bytes overlapping the original aio we may decide to read that region into a page before continuing (typically because of buffered-io fallback). Since we have no ordering guarantees with the aio, we can read stale or bad data into the page and then write it back out. If the i/o is page and block aligned, then we avoid this issue as there won't be any need to read data from disk. I took the same approach as Eric in the ext4 patch and introduced some serialization of unaligned async direct i/o. I don't expect this to have an effect on the most common cases of AIO. Unaligned aio will be slower though, but that's far more acceptable than data corruption. Signed-off-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index ac97bca..4c1ec8f 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -564,6 +564,7 @@ static void ocfs2_dio_end_io(struct kiocb *iocb, { struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; int level; + wait_queue_head_t *wq = ocfs2_ioend_wq(inode); /* this io's submitter should not have unlocked this before we could */ BUG_ON(!ocfs2_iocb_is_rw_locked(iocb)); @@ -573,6 +574,15 @@ static void ocfs2_dio_end_io(struct kiocb *iocb, ocfs2_iocb_clear_sem_locked(iocb); } + if (ocfs2_iocb_is_unaligned_aio(iocb)) { + ocfs2_iocb_clear_unaligned_aio(iocb); + + if (atomic_dec_and_test(&OCFS2_I(inode)->ip_unaligned_aio) && + waitqueue_active(wq)) { + wake_up_all(wq); + } + } + ocfs2_iocb_clear_rw_locked(iocb); level = ocfs2_iocb_rw_locked_level(iocb); diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h index 75cf3ad..ffb2da3 100644 --- a/fs/ocfs2/aops.h +++ b/fs/ocfs2/aops.h @@ -78,6 +78,7 @@ enum ocfs2_iocb_lock_bits { OCFS2_IOCB_RW_LOCK = 0, OCFS2_IOCB_RW_LOCK_LEVEL, OCFS2_IOCB_SEM, + OCFS2_IOCB_UNALIGNED_IO, OCFS2_IOCB_NUM_LOCKS }; @@ -91,4 +92,17 @@ enum ocfs2_iocb_lock_bits { clear_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private) #define ocfs2_iocb_is_sem_locked(iocb) \ test_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private) + +#define ocfs2_iocb_set_unaligned_aio(iocb) \ + set_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) +#define ocfs2_iocb_clear_unaligned_aio(iocb) \ + clear_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) +#define ocfs2_iocb_is_unaligned_aio(iocb) \ + test_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private) + +#define OCFS2_IOEND_WQ_HASH_SZ 37 +#define ocfs2_ioend_wq(v) (&ocfs2__ioend_wq[((unsigned long)(v)) %\ + OCFS2_IOEND_WQ_HASH_SZ]) +extern wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ]; + #endif /* OCFS2_FILE_H */ diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index b1e35a3..145f453 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2038,6 +2038,23 @@ out: return ret; } +static void ocfs2_aiodio_wait(struct inode *inode) +{ + wait_queue_head_t *wq = ocfs2_ioend_wq(inode); + + wait_event(*wq, (atomic_read(&OCFS2_I(inode)->ip_unaligned_aio) == 0)); +} + +static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos) +{ + int blockmask = inode->i_sb->s_blocksize - 1; + loff_t final_size = pos + count; + + if ((pos & blockmask) || (final_size & blockmask)) + return 1; + return 0; +} + static int ocfs2_prepare_inode_for_refcount(struct inode *inode, struct file *file, loff_t pos, size_t count, @@ -2216,6 +2233,7 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); int full_coherency = !(osb->s_mount_opt & OCFS2_MOUNT_COHERENCY_BUFFERED); + int unaligned_dio = 0; trace_ocfs2_file_aio_write(inode, file, file->f_path.dentry, (unsigned long long)OCFS2_I(inode)->ip_blkno, @@ -2284,6 +2302,10 @@ relock: goto out; } + if (direct_io && !is_sync_kiocb(iocb)) + unaligned_dio = ocfs2_is_io_unaligned(inode, iocb->ki_left, + *ppos); + /* * We can't complete the direct I/O as requested, fall back to * buffered I/O. @@ -2299,6 +2321,18 @@ relock: goto relock; } + if (unaligned_dio) { + /* + * Wait on previous unaligned aio to complete before + * proceeding. + */ + ocfs2_aiodio_wait(inode); + + /* Mark the iocb as needing a decrement in ocfs2_dio_end_io */ + atomic_inc(&OCFS2_I(inode)->ip_unaligned_aio); + ocfs2_iocb_set_unaligned_aio(iocb); + } + /* * To later detect whether a journal commit for sync writes is * necessary, we sample i_size, and cluster count here. @@ -2371,8 +2405,12 @@ out_dio: if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) { rw_level = -1; have_alloc_sem = 0; + unaligned_dio = 0; } + if (unaligned_dio) + atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio); + out: if (rw_level != -1) ocfs2_rw_unlock(inode, rw_level); diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index 1c508b1..88924a3 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -43,6 +43,9 @@ struct ocfs2_inode_info /* protects extended attribute changes on this inode */ struct rw_semaphore ip_xattr_sem; + /* Number of outstanding AIO's which are not page aligned */ + atomic_t ip_unaligned_aio; + /* These fields are protected by ip_lock */ spinlock_t ip_lock; u32 ip_open_count; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 029c4cd..603f5fe 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -54,6 +54,7 @@ #include "ocfs1_fs_compat.h" #include "alloc.h" +#include "aops.h" #include "blockcheck.h" #include "dlmglue.h" #include "export.h" @@ -1616,12 +1617,17 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) return 0; } +wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ]; + static int __init ocfs2_init(void) { - int status; + int status, i; ocfs2_print_version(); + for (i = 0; i < OCFS2_IOEND_WQ_HASH_SZ; i++) + init_waitqueue_head(&ocfs2__ioend_wq[i]); + status = init_ocfs2_uptodate_cache(); if (status < 0) { mlog_errno(status); @@ -1760,7 +1766,7 @@ static void ocfs2_inode_init_once(void *data) ocfs2_extent_map_init(&oi->vfs_inode); INIT_LIST_HEAD(&oi->ip_io_markers); oi->ip_dir_start_lookup = 0; - + atomic_set(&oi->ip_unaligned_aio, 0); init_rwsem(&oi->ip_alloc_sem); init_rwsem(&oi->ip_xattr_sem); mutex_init(&oi->ip_io_mutex); -- cgit v0.10.2 From c7e25e6e0b0486492c5faaf6312b37413642c48e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 23 Jun 2011 22:51:47 +0200 Subject: ocfs2: Avoid livelock in ocfs2_readpage() When someone writes to an inode, readers accessing the same inode via ocfs2_readpage() just busyloop trying to get ip_alloc_sem because do_generic_file_read() looks up the page again and retries ->readpage() when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough readers, they can occupy all CPUs and in non-preempt kernel the system is deadlocked because writer holding ip_alloc_sem is never run to release the semaphore. Fix the problem by making reader block on ip_alloc_sem to break the busy loop. Signed-off-by: Jan Kara Signed-off-by: Joel Becker diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 4c1ec8f..ba3ca1e 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -290,7 +290,15 @@ static int ocfs2_readpage(struct file *file, struct page *page) } if (down_read_trylock(&oi->ip_alloc_sem) == 0) { + /* + * Unlock the page and cycle ip_alloc_sem so that we don't + * busyloop waiting for ip_alloc_sem to unlock + */ ret = AOP_TRUNCATED_PAGE; + unlock_page(page); + unlock = 0; + down_read(&oi->ip_alloc_sem); + up_read(&oi->ip_alloc_sem); goto out_inode_unlock; } -- cgit v0.10.2 From ece9528e5f88cee11303fceefe39382f1030cd4e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 12 Jul 2011 08:18:15 -0700 Subject: gpio/omap: replace MOD_REG_BIT macro with static inline This macro is ugly and confusing, especially since it passes in most arguments, but uses an implied 'base' from the caller. Replace it with an equivalent static inline. Signed-off-by: Kevin Hilman diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0599854..34a7110 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -148,13 +148,17 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; } -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) +static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) +{ + int l = __raw_readl(base + reg); + + if (set) + l |= mask; + else + l &= ~mask; + + __raw_writel(l, base + reg); +} /** * _set_gpio_debounce - low level gpio debounce time @@ -210,28 +214,28 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); + _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge -- cgit v0.10.2 From 832337490f22987a1b739ba840e105c0c9af01bc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Mon, 18 Jul 2011 07:43:14 -0700 Subject: gpio/omap: check return value from irq_alloc_generic_chip Ensure return value of irq_alloc_generic_chip() is checked before continuing on to use it. Signed-off-by: Todd Poynor Signed-off-by: Kevin Hilman diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 34a7110..f0208a9 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1090,6 +1090,11 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, handle_simple_irq); + if (!gc) { + dev_err(bank->dev, "Memory alloc failed for gc\n"); + return; + } + ct = gc->chip_types; /* NOTE: No ack required, reading IRQ status clears it. */ -- cgit v0.10.2 From dc9c0beecfeb4866fdbc245c295cf30d340b702c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 11 Oct 2011 15:19:43 -0400 Subject: piix: ICH7 MWDMA1 errata Based on libata commit c611bed7. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index b59d04c..1892e81 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -331,7 +331,7 @@ static const struct ide_port_ops ich_port_ops = { .udma_mask = udma, \ } -#define DECLARE_ICH_DEV(udma) \ +#define DECLARE_ICH_DEV(mwdma, udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ @@ -340,7 +340,7 @@ static const struct ide_port_ops ich_port_ops = { .port_ops = &ich_port_ops, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ + .mwdma_mask = mwdma, \ .udma_mask = udma, \ } @@ -362,13 +362,15 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { /* 2: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA2), /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2), /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4), /* 5: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), + /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5), + /* 7: ICH7/7-R, no MWDMA1 */ + DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5), }; /** @@ -438,9 +440,9 @@ static const struct pci_device_id piix_pci_tbl[] = { #endif { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, { 0, }, }; -- cgit v0.10.2 From 839e7306e5d1ebd57cf12e83d9910b8b2dbe79ba Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 12 Oct 2011 04:31:51 +0000 Subject: IDE: Don't powerdown Compaq Triflex IDE device on suspend Don't powerdown Compaq Triflex IDE device on suspend This fixes APM suspend on Compaq Armada 7400. APM BIOS doesn't suspend if IDE is powered down when suspending. The Triflex controller is found only on old Compaq boards, so this patch will hopefully have no side effects. This patch fixes a suspend regression introduced in feb22b7f8e62b1b987a3a1dbad95af767a1df832 ("ide: add proper PCI PM support (v2)"). Signed-off-by: Mikulas Patocka [bart: add commit's summary in parens] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index e53a1b7..281c914 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -113,12 +113,26 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); +#ifdef CONFIG_PM +static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(dev); + return 0; +} +#else +#define triflex_ide_pci_suspend NULL +#endif + static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, - .suspend = ide_pci_suspend, + .suspend = triflex_ide_pci_suspend, .resume = ide_pci_resume, }; -- cgit v0.10.2 From acc8dbe7f44f1bab6fcf21f2d5efb32ea92e19fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Oct 2011 04:45:34 +0000 Subject: icside: DMA support fix Fix problem introduced by commit 5e37bdc ("ide: add struct ide_dma_ops (take 3)"): d.dma_ops shouldn't be cleared if we are going to use DMA. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4a697a2..8716066 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -521,8 +521,8 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; + } else d.dma_ops = NULL; - } ret = ide_host_register(host, &d, hws); if (ret) -- cgit v0.10.2 From 0ab3d8b3213c8bb55370b11fcc5321ee4f2c5e92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 13 Oct 2011 00:28:54 +0000 Subject: cy82c693: fix PCI device selection Wrong PCI device may be selected by cy82c693_set_pio_mode() if modular IDE host drivers are used and there are additional IDE PCI devices installed in the system. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 67cbcfa..847553f 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick , Integrator - * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * @@ -90,7 +90,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -141,7 +141,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } - if (hwif->index > 0) + if (drive->dn > 1) pci_dev_put(dev); } -- cgit v0.10.2 From c2bc11113c50449f23c40b724fe410fc2380a8e9 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 27 Oct 2011 18:12:42 -0700 Subject: time: Improve documentation of timekeeeping_adjust() After getting a number of questions in private emails about the math around admittedly very complex timekeeping_adjust() and timekeeping_big_adjust(), I figure the code needs some better comments. Hopefully the explanations are clear enough and don't muddy the water any worse. Still needs documentation for ntp_error, but I couldn't recall exactly the full explanation behind the code that's there (although I do recall once working it out when Roman first proposed it). Given a bit more time I can probably work it out, but I don't want to hold back this documentation until then. Signed-off-by: John Stultz Cc: Chen Jie Cc: Steven Rostedt Link: http://lkml.kernel.org/r/1319764362-32367-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2b021b0e..025e136 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -802,14 +802,44 @@ static void timekeeping_adjust(s64 offset) s64 error, interval = timekeeper.cycle_interval; int adj; + /* + * The point of this is to check if the error is greater then half + * an interval. + * + * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs. + * + * Note we subtract one in the shift, so that error is really error*2. + * This "saves" dividing(shifting) intererval twice, but keeps the + * (error > interval) comparision as still measuring if error is + * larger then half an interval. + * + * Note: It does not "save" on aggrivation when reading the code. + */ error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1); if (error > interval) { + /* + * We now divide error by 4(via shift), which checks if + * the error is greater then twice the interval. + * If it is greater, we need a bigadjust, if its smaller, + * we can adjust by 1. + */ error >>= 2; + /* + * XXX - In update_wall_time, we round up to the next + * nanosecond, and store the amount rounded up into + * the error. This causes the likely below to be unlikely. + * + * The properfix is to avoid rounding up by using + * the high precision timekeeper.xtime_nsec instead of + * xtime.tv_nsec everywhere. Fixing this will take some + * time. + */ if (likely(error <= interval)) adj = 1; else adj = timekeeping_bigadjust(error, &interval, &offset); } else if (error < -interval) { + /* See comment above, this is just switched for the negative */ error >>= 2; if (likely(error >= -interval)) { adj = -1; @@ -817,9 +847,58 @@ static void timekeeping_adjust(s64 offset) offset = -offset; } else adj = timekeeping_bigadjust(error, &interval, &offset); - } else + } else /* No adjustment needed */ return; + /* + * So the following can be confusing. + * + * To keep things simple, lets assume adj == 1 for now. + * + * When adj != 1, remember that the interval and offset values + * have been appropriately scaled so the math is the same. + * + * The basic idea here is that we're increasing the multiplier + * by one, this causes the xtime_interval to be incremented by + * one cycle_interval. This is because: + * xtime_interval = cycle_interval * mult + * So if mult is being incremented by one: + * xtime_interval = cycle_interval * (mult + 1) + * Its the same as: + * xtime_interval = (cycle_interval * mult) + cycle_interval + * Which can be shortened to: + * xtime_interval += cycle_interval + * + * So offset stores the non-accumulated cycles. Thus the current + * time (in shifted nanoseconds) is: + * now = (offset * adj) + xtime_nsec + * Now, even though we're adjusting the clock frequency, we have + * to keep time consistent. In other words, we can't jump back + * in time, and we also want to avoid jumping forward in time. + * + * So given the same offset value, we need the time to be the same + * both before and after the freq adjustment. + * now = (offset * adj_1) + xtime_nsec_1 + * now = (offset * adj_2) + xtime_nsec_2 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_2) + xtime_nsec_2 + * And we know: + * adj_2 = adj_1 + 1 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * (adj_1+1)) + xtime_nsec_2 + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_1) + offset + xtime_nsec_2 + * Canceling the sides: + * xtime_nsec_1 = offset + xtime_nsec_2 + * Which gives us: + * xtime_nsec_2 = xtime_nsec_1 - offset + * Which simplfies to: + * xtime_nsec -= offset + * + * XXX - TODO: Doc ntp_error calculation. + */ timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; -- cgit v0.10.2 From f74974c763c872d65da4062a14f4e73c77a0b577 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 17:27:51 +0200 Subject: drm/i915: disable temporal dithering on the internal panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i'm getting tempted to just disable temporal Approved. apparently it makes the screen look pulse-y which is worse than the disease. References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.html Tested-by: Олег Герман Reviewed-by: Adam Jackson Signed-off-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 981b1f1..b75bd93 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5671,7 +5671,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); -- cgit v0.10.2 From 80a2901d2a59946d098c4479d650d0c3c82c3d85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Oct 2011 10:59:05 +0200 Subject: drm/i915: only match on PCI_BASE_CLASS_DISPLAY ... not DISPLAY_VGA, because we ignore the VGA subclass with our class_mask. It confused me until Chris Wilson clued me up. Signed-off-by: Daniel Vetter Reviewed-by: Adam Jackson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4c8d681..548e04b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -106,7 +106,7 @@ static struct drm_driver driver; extern int intel_agp_enabled; #define INTEL_VGA_DEVICE(id, info) { \ - .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class = PCI_BASE_CLASS_DISPLAY << 16, \ .class_mask = 0xff0000, \ .vendor = 0x8086, \ .device = id, \ -- cgit v0.10.2 From 828204903945002be837d938401e242978b7b505 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 10 Oct 2011 16:33:34 -0400 Subject: drm/i915: intel_choose_pipe_bpp_dither messages should be DRM_DEBUG_KMS Shouldn't hide these behind _DRIVER, they're all KMS-related. Signed-off-by: Adam Jackson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b75bd93..9fa342e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4711,7 +4711,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4722,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4737,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,10 +4748,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } @@ -4789,8 +4789,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; -- cgit v0.10.2 From 3fca806cf343155d0bb0dfbdbc2e51ef47b65750 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8..3a8d448 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); -- cgit v0.10.2 From c5e62bdd73da80e1017058c923336a5a150af9f2 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d448..c92424c 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } -- cgit v0.10.2 From f0eb824beee3f596b9799e667a6fdac3116e9f7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:31:59 +0200 Subject: gpio: pca953x: remove unneeded check for chip type We can assume our own device_id table is correct, so remove checking if the chip type is valid. (The check was bogus anyway: If it found an invalid entry, it returned with 0!) This is in preparation for further cleanups. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index c43b8ff..45de6a4 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -673,10 +673,8 @@ static int __devinit pca953x_probe(struct i2c_client *client, if (chip->chip_type == PCA953X_TYPE) device_pca953x_init(chip, invert); - else if (chip->chip_type == PCA957X_TYPE) - device_pca957x_init(chip, invert); else - goto out_failed; + device_pca957x_init(chip, invert); ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v0.10.2 From 7ea2aa2046a15af1c048115e7c05f1ba1566899d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:32:00 +0200 Subject: gpio: pca953x: propagate the errno from the chip_init functions Initializing the chips may return with an error, but this error gets dropped in probe(). Propagate this further to the driver core. Also, simplify returning the error in one of the init functions. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 45de6a4..a3fef0c 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -595,9 +595,6 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert) /* set platform specific polarity inversion */ ret = pca953x_write_reg(chip, PCA953X_INVERT, invert); - if (ret) - goto out; - return 0; out: return ret; } @@ -639,7 +636,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, struct pca953x_platform_data *pdata; struct pca953x_chip *chip; int irq_base=0, invert=0; - int ret = 0; + int ret; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); if (chip == NULL) @@ -672,9 +669,11 @@ static int __devinit pca953x_probe(struct i2c_client *client, pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) - device_pca953x_init(chip, invert); + ret = device_pca953x_init(chip, invert); else - device_pca957x_init(chip, invert); + ret = device_pca957x_init(chip, invert); + if (ret) + goto out_failed; ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v0.10.2 From 0d52f54e2ef64c189dedc332e680b2eb4a34590a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 22 Oct 2011 00:43:38 +0200 Subject: PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 596172b..fce1c54 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -459,8 +459,17 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; + struct acpi_pci_root *root; acpi_handle dummy_handle; + /* + * We shouldn't use this bridge if PCIe native hotplug control has been + * granted by the BIOS for it. + */ + root = acpi_pci_find_root(handle); + if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return -ENODEV; + /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1376,13 +1385,23 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { + struct acpi_pci_root *root; int *count = (int *)context; - if (acpi_is_root_bridge(handle)) { - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - handle_hotplug_event_bridge, NULL); - (*count)++; - } + if (!acpi_is_root_bridge(handle)) + return AE_OK; + + root = acpi_pci_find_root(handle); + if (!root) + return AE_OK; + + if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) + return AE_OK; + + (*count)++; + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge, NULL); + return AE_OK ; } -- cgit v0.10.2 From 466b3ddfbcf4f5ce402a77397630a0fa9ea9ce6b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:08 +0100 Subject: PCI: Fix compile errors with PCI_ATS and !PCI_IOV The ats and sroiv members of 'struct pci_dev' are required for the ATS code already, even without IOV support compiled in. So depend on ATS here. This is fine with PCI_IOV too because it selects PCI_ATS. Also the prototypes for ATS need to be available for PCI_ATS. Reported-by: Randy Dunlap Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index e3d0b38..7ef6872 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -12,7 +12,7 @@ struct pci_ats { unsigned int is_enabled:1; /* Enable bit is set */ }; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); @@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return dev->ats && dev->ats->is_enabled; } -#else /* CONFIG_PCI_IOV */ +#else /* CONFIG_PCI_ATS */ static inline int pci_enable_ats(struct pci_dev *dev, int ps) { @@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return 0; } -#endif /* CONFIG_PCI_IOV */ +#endif /* CONFIG_PCI_ATS */ #ifdef CONFIG_PCI_PRI diff --git a/include/linux/pci.h b/include/linux/pci.h index 337df0d5..7cda65b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_dev { struct list_head msi_list; #endif struct pci_vpd *vpd; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* SR-IOV capability related */ struct pci_dev *physfn; /* the PF this VF is associated with */ -- cgit v0.10.2 From c54420d3302d30999060e2669d0800b85e5b5a20 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:07 +0100 Subject: PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index cec6606..8252fc3 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -87,6 +87,7 @@ config PCI_IOV config PCI_PRI bool "PCI PRI support" + depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are -- cgit v0.10.2 From 627f7675f0f530ea555d76543dc4e469d70a1532 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 31 Oct 2011 11:30:10 -0700 Subject: drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work Use of the struct_mutex is not correct for locking in mode setting paths. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc1a0832..7259034 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -971,9 +971,9 @@ static void ironlake_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp->base.base.dev; - mutex_lock(&dev->struct_mutex); + mutex_lock(&dev->mode_config.mutex); ironlake_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); } static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) -- cgit v0.10.2 From ff56b0bc84c01fb2c5d2ec6438becfe0f5f2f78f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36..d18b07a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { -- cgit v0.10.2 From f43d623164022dcbf6750ef220b7a1133a1183eb Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 20 Oct 2011 23:52:14 -0400 Subject: usb, xhci: fix lockdep warning on endpoint timeout While debugging a usb3 problem, I stumbled upon this lockdep warning. Oct 18 21:41:17 dhcp47-74 kernel: ================================= Oct 18 21:41:17 dhcp47-74 kernel: [ INFO: inconsistent lock state ] Oct 18 21:41:17 dhcp47-74 kernel: 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: --------------------------------- Oct 18 21:41:17 dhcp47-74 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Oct 18 21:41:17 dhcp47-74 kernel: swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: Oct 18 21:41:17 dhcp47-74 kernel: (&(&xhci->lock)->rlock){?.-...}, at: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: {IN-HARDIRQ-W} state was registered at: Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x781/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_irq+0x3a/0x1960 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_msi_irq+0x31/0x40 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event_percpu+0x85/0x320 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq_event+0x48/0x70 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_edge_irq+0x6d/0x130 Oct 18 21:41:17 dhcp47-74 kernel: [] handle_irq+0x49/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] do_IRQ+0x5d/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] ret_from_intr+0x0/0x13 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_set_device_state+0x8a/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] usb_add_hcd+0x2b8/0x730 Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_pci_probe+0x9e/0xd4 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] local_pci_probe+0x5f/0xd0 Oct 18 21:41:17 dhcp47-74 kernel: [] pci_device_probe+0x119/0x120 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_probe_device+0xa3/0x2c0 Oct 18 21:41:17 dhcp47-74 kernel: [] __driver_attach+0xab/0xb0 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_for_each_dev+0x6c/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_attach+0x1e/0x20 Oct 18 21:41:17 dhcp47-74 kernel: [] bus_add_driver+0x1f8/0x2b0 Oct 18 21:41:17 dhcp47-74 kernel: [] driver_register+0x76/0x140 Oct 18 21:41:17 dhcp47-74 kernel: [] __pci_register_driver+0x66/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0x4a/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] snd_timer_find+0xe/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [] do_one_initcall+0x43/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [] sys_init_module+0x92/0x1f0 Oct 18 21:41:17 dhcp47-74 kernel: [] system_call_fastpath+0x16/0x1b Oct 18 21:41:17 dhcp47-74 kernel: irq event stamp: 631984 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last enabled at (631984): [] _raw_spin_unlock_irq+0x30/0x50 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last disabled at (631983): [] _raw_spin_lock_irq+0x19/0x90 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last enabled at (631980): [] _local_bh_enable+0x13/0x20 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last disabled at (631981): [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: other info that might help us debug this: Oct 18 21:41:17 dhcp47-74 kernel: Possible unsafe locking scenario: Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: CPU0 Oct 18 21:41:17 dhcp47-74 kernel: ---- Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: *** DEADLOCK *** Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: 1 lock held by swapper/0: Oct 18 21:41:17 dhcp47-74 kernel: #0: (&ep->stop_cmd_timer){+.-...}, at: [] run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: stack backtrace: Oct 18 21:41:17 dhcp47-74 kernel: Pid: 0, comm: swapper Tainted: G W 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: Call Trace: Oct 18 21:41:17 dhcp47-74 kernel: [] print_usage_bug+0x227/0x270 Oct 18 21:41:17 dhcp47-74 kernel: [] mark_lock+0x346/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] __lock_acquire+0x61e/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [] ? mark_lock+0x213/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] run_timer_softirq+0x20d/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [] ? xhci_queue_isoc_tx_prepare+0x8e0/0x8e0 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [] __do_softirq+0xf2/0x3f0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? lapic_next_event+0x1d/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] ? clockevents_program_event+0x5e/0x90 Oct 18 21:41:17 dhcp47-74 kernel: [] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [] do_softirq+0x8d/0xc0 Oct 18 21:41:17 dhcp47-74 kernel: [] irq_exit+0xe5/0x100 Oct 18 21:41:17 dhcp47-74 kernel: [] smp_apic_timer_interrupt+0x6e/0x99 Oct 18 21:41:17 dhcp47-74 kernel: [] apic_timer_interrupt+0x70/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [] ? trace_hardirqs_off+0xd/0x10 Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x227/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] ? acpi_idle_enter_bm+0x222/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [] cpuidle_idle_call+0x103/0x290 Oct 18 21:41:17 dhcp47-74 kernel: [] cpu_idle+0xe5/0x160 Oct 18 21:41:17 dhcp47-74 kernel: [] rest_init+0xe0/0xf0 Oct 18 21:41:17 dhcp47-74 kernel: [] ? csum_partial_copy_generic+0x170/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [] start_kernel+0x3fc/0x407 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_reservations+0x131/0x135 Oct 18 21:41:17 dhcp47-74 kernel: [] x86_64_start_kernel+0xed/0xf4 Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: HC died; cleaning up Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -110 Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -22 Oct 18 21:41:17 dhcp47-74 kernel: hub 3-0:1.0: cannot disable port 4 (err = -19) Basically what is happening is in xhci_stop_endpoint_command_watchdog() the xhci->lock is grabbed with just spin_lock. What lockdep deduces is that if an interrupt occurred while in this function it would deadlock with xhci_irq because that function also grabs the xhci->lock. Fixing it is trivial by using spin_lock_irqsave instead. This should be queued to stable kernels as far back as 2.6.33. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 940321b..9f1d4b1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) struct xhci_ring *ring; struct xhci_td *cur_td; int ret, i, j; + unsigned long flags; ep = (struct xhci_virt_ep *) arg; xhci = ep->xhci; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg(xhci, "Stop EP timer ran, but another timer marked " "xHCI as DYING, exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg(xhci, "Stop EP timer ran, but no command pending, " "exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) xhci->xhc_state |= XHCI_STATE_DYING; /* Disable interrupts from the host controller and start halting it */ xhci_quiesce(xhci); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); ret = xhci_halt(xhci); - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are @@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } } - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Calling usb_hc_died()\n"); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); -- cgit v0.10.2 From c75d720fca8a91ce99196d33adea383621027bf2 Mon Sep 17 00:00:00 2001 From: Edward Donovan Date: Tue, 1 Nov 2011 15:29:44 -0400 Subject: genirq: Fix irqfixup, irqpoll regression commit d05c65fff0 ("genirq: spurious: Run only one poller at a time") introduced a regression, leaving the boot options 'irqfixup' and 'irqpoll' non-functional. The patch placed tests in each function, to exit if the function is already running. The test in 'misrouted_irq' exited when it should have proceeded, effectively disabling 'misrouted_irq' and 'poll_spurious_irqs'. The check for an already running poller needs to be "!= 1" not "== 1" as "1" is the value when the first poller starts running. Signed-off-by: Edward Donovan Cc: maciej.rutecki@gmail.com Link: http://lkml.kernel.org/r/1320175784-6745-1-git-send-email-edward.donovan@numble.net Cc: stable@vger.kernel.org # >= 2.6.39 Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index aa57d5d..b5f4742 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -115,7 +115,7 @@ static int misrouted_irq(int irq) struct irq_desc *desc; int i, ok = 0; - if (atomic_inc_return(&irq_poll_active) == 1) + if (atomic_inc_return(&irq_poll_active) != 1) goto out; irq_poll_cpu = smp_processor_id(); -- cgit v0.10.2 From 616fdb5afb12b4d5bb9e36df40d039e86aaaefc2 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 5 Oct 2011 11:44:54 -0700 Subject: drm/i915: forcewake warning fixes in debugfs Some more unsafe debugfs access are fixed with this patch. I tested all reads, but didn't thoroughly test the writes. Cc: "Nicolas Kalkhof" Signed-off-by: Ben Widawsky Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 8e95d66..f2e0207 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -635,11 +635,16 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; + int ret; ring = &dev_priv->ring[(uintptr_t)node->info_ent->data]; if (ring->size == 0) return 0; + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + seq_printf(m, "Ring %s:\n", ring->name); seq_printf(m, " Head : %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR); seq_printf(m, " Tail : %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR); @@ -653,6 +658,8 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Control : %08x\n", I915_READ_CTL(ring)); seq_printf(m, " Start : %08x\n", I915_READ_START(ring)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -841,7 +848,16 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u16 crstanddelay = I915_READ16(CRSTANDVID); + u16 crstanddelay; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + crstanddelay = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f)); @@ -939,7 +955,11 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 delayfreq; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 0; i < 16; i++) { delayfreq = I915_READ(PXVFREQ_BASE + i * 4); @@ -947,6 +967,8 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused) (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -961,13 +983,19 @@ static int i915_inttoext_table(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; u32 inttoext; - int i; + int ret, i; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; for (i = 1; i <= 32; i++) { inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4); seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext); } + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -976,9 +1004,19 @@ static int i915_drpc_info(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; - u32 rgvmodectl = I915_READ(MEMMODECTL); - u32 rstdbyctl = I915_READ(RSTDBYCTL); - u16 crstandvid = I915_READ16(CRSTANDVID); + u32 rgvmodectl, rstdbyctl; + u16 crstandvid; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + rgvmodectl = I915_READ(MEMMODECTL); + rstdbyctl = I915_READ(RSTDBYCTL); + crstandvid = I915_READ16(CRSTANDVID); + + mutex_unlock(&dev->struct_mutex); seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ? "yes" : "no"); @@ -1166,9 +1204,16 @@ static int i915_gfxec(struct seq_file *m, void *unused) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4)); + mutex_unlock(&dev->struct_mutex); + return 0; } -- cgit v0.10.2 From 775d17b6ca4357048f36c22151335addfe15db4b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:01 +0200 Subject: drm/i915: Ivybridge still has fences! So don't forget to restore them on resume and dump them into the error state. Cc: stable@kernel.org Signed-off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9ee2729..b40004b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -824,6 +824,7 @@ static void i915_gem_record_fences(struct drm_device *dev, /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index f8f602d..7886e4f 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -370,6 +370,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); @@ -404,6 +405,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Fences */ switch (INTEL_INFO(dev)->gen) { + case 7: case 6: for (i = 0; i < 16; i++) I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]); -- cgit v0.10.2 From 4b9de737fad5bd8993e6070530802de22f32744d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Oct 2011 21:52:02 +0200 Subject: drm/i915: add constants to size fence arrays and fields In preparation of to support 32 fences on Ivybdrigde. Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 06a37f4..d2da91f 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -126,6 +126,9 @@ struct drm_i915_master_private { struct _drm_i915_sarea *sarea_priv; }; #define I915_FENCE_REG_NONE -1 +#define I915_MAX_NUM_FENCES 16 +/* 16 fences + sign bit for FENCE_REG_NONE */ +#define I915_MAX_NUM_FENCE_BITS 5 struct drm_i915_fence_reg { struct list_head lru_list; @@ -168,7 +171,7 @@ struct drm_i915_error_state { u32 instdone1; u32 seqno; u64 bbaddr; - u64 fence[16]; + u64 fence[I915_MAX_NUM_FENCES]; struct timeval time; struct drm_i915_error_object { int page_count; @@ -182,7 +185,7 @@ struct drm_i915_error_state { u32 gtt_offset; u32 read_domains; u32 write_domain; - s32 fence_reg:5; + s32 fence_reg:I915_MAX_NUM_FENCE_BITS; s32 pinned:2; u32 tiling:2; u32 dirty:1; @@ -375,7 +378,7 @@ typedef struct drm_i915_private { struct notifier_block lid_notifier; int crt_ddc_pin; - struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ + struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ @@ -506,7 +509,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; - uint64_t saveFENCE[16]; + uint64_t saveFENCE[I915_MAX_NUM_FENCES]; u32 saveCURACNTR; u32 saveCURAPOS; u32 saveCURABASE; @@ -777,10 +780,8 @@ struct drm_i915_gem_object { * Fence register bits (if any) for this object. Will be set * as needed when mapped into the GTT. * Protected by dev->struct_mutex. - * - * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE) */ - signed int fence_reg:5; + signed int fence_reg:I915_MAX_NUM_FENCE_BITS; /** * Advice: are the backing pages purgeable? diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d18b07a..a838597 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1745,7 +1745,7 @@ static void i915_gem_reset_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - for (i = 0; i < 16; i++) { + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct drm_i915_gem_object *obj = reg->obj; @@ -3877,7 +3877,7 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.gtt_list); for (i = 0; i < I915_NUM_RINGS; i++) init_ring_lists(&dev_priv->ring[i]); - for (i = 0; i < 16; i++) + for (i = 0; i < I915_MAX_NUM_FENCES; i++) INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); -- cgit v0.10.2 From a9866a0975881ba5e819b0a02324ba683b5cdb81 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 21 Oct 2011 11:53:34 +0800 Subject: MAINTAINERS: add ARM/FREESCALE MXS entry As suggested by Pengutronix, they want to get Sascha relieved from the burden of maintaining MXS sub-architecture. Since I brought the most of MXS core code to mainline (with the great help from Pengutronix people, thanks!), I would like to step up for maintaining MXS. Signed-off-by: Shawn Guo Acked-by: Sascha Hauer diff --git a/MAINTAINERS b/MAINTAINERS index ab77670..8fe3f01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -804,6 +804,13 @@ S: Maintained T: git git://git.linaro.org/people/shawnguo/linux-2.6.git F: arch/arm/mach-imx/*imx6* +ARM/FREESCALE MXS ARM ARCHITECTURE +M: Shawn Guo +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +T: git git://git.linaro.org/people/shawnguo/linux-2.6.git +F: arch/arm/mach-mxs/ + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 680da876f44a644aee891e1d0df5a560cfa4720e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 3 Nov 2011 14:15:13 -0700 Subject: drm/i915: enable cacheable objects on Ivybridge IVB supports these bits as well. Signed-off-by: Jesse Barnes Reviewed-by: Daniel Vetter Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a838597..ed0b68f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3613,7 +3613,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, obj->base.write_domain = I915_GEM_DOMAIN_CPU; obj->base.read_domains = I915_GEM_DOMAIN_CPU; - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* On Gen6, we can have the GPU use the LLC (the CPU * cache) for about a 10% performance improvement * compared to uncached. Graphics requests other than -- cgit v0.10.2 From d31c285b3a71cf9056e6a060de41f37780b0af86 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 3 Nov 2011 13:06:08 -0700 Subject: xhci: Set slot and ep0 flags for address command. Matt's AsMedia xHCI host controller was responding with a Context Error to an address device command after a configured device reset. Some sequence of events leads both the slot and endpoint zero add flags cleared to zero, which the AsMedia host doesn't like: [ 223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags [ 223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags [ 223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0] [ 223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1] [ 223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2] [ 223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3] [ 223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4] [ 223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5] [ 223.701858] xhci_hcd 0000:03:00.0: Slot Context: [ 223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info [ 223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2 [ 223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info [ 223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state [ 223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0] [ 223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1] [ 223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2] [ 223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3] [ 223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context: [ 223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info [ 223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2 [ 223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq [ 223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info [ 223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0] [ 223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1] [ 223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2] ... [ 223.701927] xhci_hcd 0000:03:00.0: // Ding dong! [ 223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1. The xHCI spec says that both flags must be set to one for the Address Device command. When the device is first enumerated, xhci_setup_addressable_virt_dev() does set those flags. However, when the device is addressed after it has been reset in the configured state, xhci_setup_addressable_virt_dev() is not called, and xhci_copy_ep0_dequeue_into_input_ctx() is called instead. That function relies on the flags being set up by previous commands, which apparently isn't a good assumption. Move the setting of the flags into the common parent function. This should be queued for stable kernels as old as 2.6.35, since that was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx. Signed-off-by: Sarah Sharp Tested-by: Matt Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 42a22b8..0e4b25f 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - struct xhci_input_control_ctx *ctrl_ctx; u32 port_num; struct usb_device *top_dev; @@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return -EINVAL; } ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); - ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); - /* 2) New slot context and endpoint 0 context are valid*/ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); - /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1ff95a0..747c5ea 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3504,6 +3504,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* Otherwise, update the control endpoint ring enqueue pointer. */ else xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); @@ -3585,7 +3589,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; -- cgit v0.10.2 From 79c3dd8150fd5236d95766a9e662e3e932b462c9 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 3 Nov 2011 09:07:18 -0400 Subject: usb, xhci: Clear warm reset change event during init I noticed on my Panther Point system that I wasn't getting hotplug events for my usb3.0 disk on a usb3 port. I tracked it down to the fact that the system had the warm reset change bit still set. This seemed to block future events from being received, including a hotplug event. Clearing this bit during initialization allowed the hotplug event to be received and the disk to be recognized correctly. This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 96f05b2..7978146 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_PORT_LINK_STATE); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. */ -- cgit v0.10.2 From 1788ea6e3b2a58cf4fb00206e362d9caff8d86a7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:21 -0400 Subject: nfs: when attempting to open a directory, fall back on normal lookup (try #5) commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return from an OPEN call. Prior to that patch, that caused the client to fall back to doing a normal lookup. When that patch went in, the code began returning that error to userspace. The d_revalidate codepath however never had the corresponding change, so it was still possible to end up with a NULL ctx->state pointer after that. That patch caused a regression. When we attempt to open a directory that does not have a cached dentry, that open now errors out with EISDIR. If you attempt the same open with a cached dentry, it will succeed. Fix this by reverting the change in nfs_atomic_lookup and allowing attempts to open directories to fall back to a normal lookup Also, add a NFSv4-specific f_ops->open routine that just returns -ENOTDIR. This should never be called if things are working properly, but if it ever is, then the dprintk may help in debugging. To facilitate this, a new file_operations field is also added to the nfs_rpc_ops struct. Cc: stable@kernel.org Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index b238d95..ac28990 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1468,12 +1468,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry res = NULL; goto out; /* This turned out not to be a regular file */ + case -EISDIR: case -ENOTDIR: goto no_open; case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) goto no_open; - /* case -EISDIR: */ /* case -EINVAL: */ default: res = ERR_CAST(inode); diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 0a1f831..6d93e07 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -886,3 +886,35 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) file->f_path.dentry->d_name.name, arg); return -EINVAL; } + +#ifdef CONFIG_NFS_V4 +static int +nfs4_file_open(struct inode *inode, struct file *filp) +{ + /* + * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to + * this point, then something is very wrong + */ + dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp); + return -ENOTDIR; +} + +const struct file_operations nfs4_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs4_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; +#endif /* CONFIG_NFS_V4 */ diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index c07a55a..50a15fa 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -291,7 +291,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) */ inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops; if (S_ISREG(inode->i_mode)) { - inode->i_fop = &nfs_file_operations; + inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops; inode->i_data.a_ops = &nfs_file_aops; inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info; } else if (S_ISDIR(inode->i_mode)) { diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 85f1690..d4bc9ed9 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -853,6 +853,7 @@ const struct nfs_rpc_ops nfs_v3_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs3_dir_inode_operations, .file_inode_ops = &nfs3_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs3_proc_get_root, .getattr = nfs3_proc_getattr, .setattr = nfs3_proc_setattr, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index b60fddf..069cb80 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6253,6 +6253,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = { .dentry_ops = &nfs4_dentry_operations, .dir_inode_ops = &nfs4_dir_inode_operations, .file_inode_ops = &nfs4_file_inode_operations, + .file_ops = &nfs4_file_operations, .getroot = nfs4_proc_get_root, .getattr = nfs4_proc_getattr, .setattr = nfs4_proc_setattr, diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index ac40b85..f48125d 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -710,6 +710,7 @@ const struct nfs_rpc_ops nfs_v2_clientops = { .dentry_ops = &nfs_dentry_operations, .dir_inode_ops = &nfs_dir_inode_operations, .file_inode_ops = &nfs_file_inode_operations, + .file_ops = &nfs_file_operations, .getroot = nfs_proc_get_root, .getattr = nfs_proc_getattr, .setattr = nfs_proc_setattr, diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index ab2c634..92ecf55 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations; extern const struct inode_operations nfs3_file_inode_operations; #endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_file_operations; +#ifdef CONFIG_NFS_V4 +extern const struct file_operations nfs4_file_operations; +#endif /* CONFIG_NFS_V4 */ extern const struct address_space_operations nfs_file_aops; extern const struct address_space_operations nfs_dir_aops; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index c74595b..2a7c533 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1192,6 +1192,7 @@ struct nfs_rpc_ops { const struct dentry_operations *dentry_ops; const struct inode_operations *dir_inode_ops; const struct inode_operations *file_inode_ops; + const struct file_operations *file_ops; int (*getroot) (struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); -- cgit v0.10.2 From 0486958f57a496212e3c1e3d9194deebba3dc3d4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Nov 2011 13:31:22 -0400 Subject: nfs: move nfs_file_operations declaration to bottom of file.c (try #2) ...a remove a set of forward declarations. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6d93e07..eca56d4 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -40,48 +40,8 @@ #define NFSDBG_FACILITY NFSDBG_FILE -static int nfs_file_open(struct inode *, struct file *); -static int nfs_file_release(struct inode *, struct file *); -static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin); -static int nfs_file_mmap(struct file *, struct vm_area_struct *); -static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos, - struct pipe_inode_info *pipe, - size_t count, unsigned int flags); -static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe, - struct file *filp, loff_t *ppos, - size_t count, unsigned int flags); -static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); -static int nfs_file_flush(struct file *, fl_owner_t id); -static int nfs_file_fsync(struct file *, loff_t, loff_t, int datasync); -static int nfs_check_flags(int flags); -static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl); -static int nfs_setlease(struct file *file, long arg, struct file_lock **fl); - static const struct vm_operations_struct nfs_file_vm_ops; -const struct file_operations nfs_file_operations = { - .llseek = nfs_file_llseek, - .read = do_sync_read, - .write = do_sync_write, - .aio_read = nfs_file_read, - .aio_write = nfs_file_write, - .mmap = nfs_file_mmap, - .open = nfs_file_open, - .flush = nfs_file_flush, - .release = nfs_file_release, - .fsync = nfs_file_fsync, - .lock = nfs_lock, - .flock = nfs_flock, - .splice_read = nfs_file_splice_read, - .splice_write = nfs_file_splice_write, - .check_flags = nfs_check_flags, - .setlease = nfs_setlease, -}; - const struct inode_operations nfs_file_inode_operations = { .permission = nfs_permission, .getattr = nfs_getattr, @@ -887,6 +847,25 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl) return -EINVAL; } +const struct file_operations nfs_file_operations = { + .llseek = nfs_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = nfs_file_read, + .aio_write = nfs_file_write, + .mmap = nfs_file_mmap, + .open = nfs_file_open, + .flush = nfs_file_flush, + .release = nfs_file_release, + .fsync = nfs_file_fsync, + .lock = nfs_lock, + .flock = nfs_flock, + .splice_read = nfs_file_splice_read, + .splice_write = nfs_file_splice_write, + .check_flags = nfs_check_flags, + .setlease = nfs_setlease, +}; + #ifdef CONFIG_NFS_V4 static int nfs4_file_open(struct inode *inode, struct file *filp) -- cgit v0.10.2 From b42c909743595208f7987e331f0921b73af2ce25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomas=20Miljenovi=C4=87?= Date: Fri, 4 Nov 2011 23:59:49 -0700 Subject: Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index bb9f5d3..b4cfc6c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -431,6 +431,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; @@ -560,6 +567,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; -- cgit v0.10.2 From 15a2015fbc692e1c97d7ce12d96e077f5ae7ea6d Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sat, 5 Nov 2011 22:06:31 -0700 Subject: ceph: fix iput race when queueing inode work If we queue a work item that calls iput(), make sure we ihold() before attempting to queue work. Otherwise our queued work might miraculously run before we notice the queue_work() succeeded and call ihold(), allowing the inode to be destroyed. That is, instead of if (queue_work(...)) ihold(); we need to do ihold(); if (!queue_work(...)) iput(); Reported-by: Amon Ott Signed-off-by: Sage Weil diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index e392bfc..116f365 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1328,12 +1328,13 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) */ void ceph_queue_writeback(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->wb_wq, &ceph_inode(inode)->i_wb_work)) { dout("ceph_queue_writeback %p\n", inode); - ihold(inode); } else { dout("ceph_queue_writeback %p failed\n", inode); + iput(inode); } } @@ -1353,12 +1354,13 @@ static void ceph_writeback_work(struct work_struct *work) */ void ceph_queue_invalidate(struct inode *inode) { + ihold(inode); if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq, &ceph_inode(inode)->i_pg_inv_work)) { dout("ceph_queue_invalidate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_invalidate %p failed\n", inode); + iput(inode); } } @@ -1434,13 +1436,14 @@ void ceph_queue_vmtruncate(struct inode *inode) { struct ceph_inode_info *ci = ceph_inode(inode); + ihold(inode); if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq, &ci->i_vmtruncate_work)) { dout("ceph_queue_vmtruncate %p\n", inode); - ihold(inode); } else { dout("ceph_queue_vmtruncate %p failed, pending=%d\n", inode, ci->i_truncate_pending); + iput(inode); } } -- cgit v0.10.2 From eb513689c97e3e73bb9b4459d490a8e894b4a546 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 7 Nov 2011 10:47:42 -0500 Subject: ext4: ignore journalled data options on remount if fs has no journal This avoids a confusing failure in the init scripts when the /etc/fstab has data=writeback or data=journal but the file system does not have a journal. So check for this case explicitly, and warn the user that we are ignoring the (pointless, since they have no journal) data=* mount option. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9953d80..0435013 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1683,7 +1683,9 @@ static int parse_options(char *options, struct super_block *sb, data_opt = EXT4_MOUNT_WRITEBACK_DATA; datacheck: if (is_remount) { - if (test_opt(sb, DATA_FLAGS) != data_opt) { + if (!sbi->s_journal) + ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option"); + else if (test_opt(sb, DATA_FLAGS) != data_opt) { ext4_msg(sb, KERN_ERR, "Cannot change data mode on remount"); return 0; -- cgit v0.10.2 From 2397256d6218e7bf5147a3b01dcc6aec20fd3916 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 7 Nov 2011 10:50:09 -0500 Subject: ext4: Remove kernel_lock annotations The BKL is gone, these annotations are useless. Signed-off-by: Richard Weinberger Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0435013..3858767 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3101,8 +3101,6 @@ static void ext4_destroy_lazyinit_thread(void) } static int ext4_fill_super(struct super_block *sb, void *data, int silent) - __releases(kernel_lock) - __acquires(kernel_lock) { char *orig_data = kstrdup(data, GFP_KERNEL); struct buffer_head *bh; -- cgit v0.10.2 From 3c1fcb2c24519febd7ca9cf292fa5bdf513b601f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 7 Nov 2011 11:01:13 -0500 Subject: ext4: add blk_finish_plug in error case of writepages. blk_finish_plug is needed in error case of writepages. Signed-off-by: Namjae Jeon Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cc5a6da..18b262b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2270,6 +2270,7 @@ retry: ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " "%ld pages, ino %lu; err %d", __func__, wbc->nr_to_write, inode->i_ino, ret); + blk_finish_plug(&plug); goto out_writepages; } -- cgit v0.10.2 From fdbd3ce9efb3a045266f2f6b2f1b6047882ff092 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 7 Nov 2011 07:53:23 -0800 Subject: PCI: pciehp: Retrieve link speed after link is trained During hot plug, board_added will call pciehp_power_on_slot(). But link speed is updated in pciehp_power_on_slot(). We should not update link speed there, because that is too early. So move the link speed update to pciehp_check_link_status() after making sure the link has been trained. -v2: fix compile warning that Kenji found. Signed-off-by: Yinghai Lu Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 96dc473..6692832 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -294,6 +294,8 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -484,7 +486,6 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; - u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -516,14 +517,6 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", - __func__); - return retval; - } - pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); - return retval; } -- cgit v0.10.2 From 694718d8ad2f0b11d7376f8aa32b1befff6e5966 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 17 Oct 2011 16:59:25 +0200 Subject: b43: fill ctl1 word on all newer PHYs, fix PHY errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 58ea0e5..b62d4a1 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -175,6 +175,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, } } +/* TODO: verify if needed for SSLPN or LCN */ static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate) { const struct b43_phy *phy = &dev->phy; @@ -256,6 +257,9 @@ int b43_generate_txhdr(struct b43_wldev *dev, unsigned int plcp_fragment_len; u32 mac_ctl = 0; u16 phy_ctl = 0; + bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP || + phy->type == B43_PHYTYPE_N || + phy->type == B43_PHYTYPE_HT); u8 extra_ft = 0; struct ieee80211_rate *txrate; struct ieee80211_tx_rate *rates; @@ -531,7 +535,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, extra_ft |= B43_TXH_EFT_RTSFB_CCK; if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS && - phy->type == B43_PHYTYPE_N) { + fill_phy_ctl1) { txhdr->phy_ctl1_rts = cpu_to_le16( b43_generate_tx_phy_ctl1(dev, rts_rate)); txhdr->phy_ctl1_rts_fb = cpu_to_le16( @@ -552,7 +556,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, break; } - if (phy->type == B43_PHYTYPE_N) { + if (fill_phy_ctl1) { txhdr->phy_ctl1 = cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate)); txhdr->phy_ctl1_fb = -- cgit v0.10.2 From 73d51f38c736ae286372e90056a7f31519f555ac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 17 Oct 2011 17:15:44 +0200 Subject: b43: HT-PHY: report signal to mac80211 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index b62d4a1..5f77cbe 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -740,7 +740,14 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) /* Link quality statistics */ switch (chanstat & B43_RX_CHAN_PHYTYPE) { + case B43_PHYTYPE_HT: + /* TODO: is max the right choice? */ + status.signal = max_t(__s8, + max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1), + rxhdr->phy_ht_power2); + break; case B43_PHYTYPE_N: + /* Broadcom has code for min and avg, but always uses max */ if (rxhdr->power0 == 16 || rxhdr->power0 == 32) status.signal = max(rxhdr->power1, rxhdr->power2); else diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 16c514d..98d9074 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -249,6 +249,12 @@ struct b43_rxhdr_fw4 { } __packed; } __packed; union { + /* HT-PHY */ + struct { + PAD_BYTES(1); + __s8 phy_ht_power0; + } __packed; + /* RSSI for N-PHYs */ struct { __s8 power2; @@ -257,7 +263,15 @@ struct b43_rxhdr_fw4 { __le16 phy_status2; /* PHY RX Status 2 */ } __packed; - __le16 phy_status3; /* PHY RX Status 3 */ + union { + /* HT-PHY */ + struct { + __s8 phy_ht_power1; + __s8 phy_ht_power2; + } __packed; + + __le16 phy_status3; /* PHY RX Status 3 */ + } __packed; union { /* Tested with 598.314, 644.1001 and 666.2 */ struct { -- cgit v0.10.2 From ae8e46723f803057daff392bdc93332be2f0ec98 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 29 Oct 2011 11:30:15 +0200 Subject: brcm80211: smac: eliminate a null pointer dereference in dma.c Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall Acked-by: Arend van Spriel Signed-off-by: Julian Calaby Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c index b56a302..6ebec8f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c @@ -358,13 +358,14 @@ static uint nrxdactive(struct dma_info *di, uint h, uint t) static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags) { - uint dmactrlflags = di->dma.dmactrlflags; + uint dmactrlflags; if (di == NULL) { - DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name)); + DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n")); return 0; } + dmactrlflags = di->dma.dmactrlflags; dmactrlflags &= ~mask; dmactrlflags |= flags; -- cgit v0.10.2 From 3432f9233704a66e6067944339a311744243707d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 30 Oct 2011 15:41:59 +0200 Subject: mac80211: use min rate as basic rate for buggy APs Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs Signed-off-by: Eliad Peller Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 17258fe..d3b408c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1485,6 +1485,7 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, int i, j, err; bool have_higher_than_11mbit = false; u16 ap_ht_cap_flags; + int min_rate = INT_MAX, min_rate_index = -1; /* AssocResp and ReassocResp have identical structure */ @@ -1551,6 +1552,10 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } @@ -1568,11 +1573,25 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } } + /* + * some buggy APs don't advertise basic_rates. use the lowest + * supported rate instead. + */ + if (unlikely(!basic_rates) && min_rate_index >= 0) { + printk(KERN_DEBUG "%s: No basic rates in AssocResp. " + "Using min supported rate instead.\n", sdata->name); + basic_rates = BIT(min_rate_index); + } + sta->sta.supp_rates[wk->chan->band] = rates; sdata->vif.bss_conf.basic_rates = basic_rates; -- cgit v0.10.2 From 6c7394197af90f6a332180e33f5d025d3037d883 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 09:27:01 +0100 Subject: nl80211: fix HT capability attribute validation Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 48260c2..b587857 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -132,8 +132,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED }, [NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG }, - [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY, - .len = NL80211_HT_CAPABILITY_LEN }, + [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN }, [NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 }, [NL80211_ATTR_IE] = { .type = NLA_BINARY, -- cgit v0.10.2 From 133a3ff2c934223a8143bfa52401bba962a97165 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 14:50:13 +0100 Subject: cfg80211: allow setting TXQ parameters only in AP mode In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b587857..b3a476f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1252,6 +1252,12 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) goto bad_res; } + if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) { + result = -EINVAL; + goto bad_res; + } + nla_for_each_nested(nl_txq_params, info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS], rem_txq_params) { -- cgit v0.10.2 From 3b6ef6334febb05d3050a96546e635f038dbcb15 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:01:46 +0100 Subject: cfg80211: fix cmp_ies When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 0fb1424..dc23b31 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -259,17 +259,20 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2) { const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); - int r; + /* equal if both missing */ if (!ie1 && !ie2) return 0; - if (!ie1 || !ie2) + /* sort missing IE before (left of) present IE */ + if (!ie1) return -1; + if (!ie2) + return 1; - r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1])); - if (r == 0 && ie1[1] != ie2[1]) + /* sort by length first, then by contents */ + if (ie1[1] != ie2[1]) return ie2[1] - ie1[1]; - return r; + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); } static bool is_bss(struct cfg80211_bss *a, -- cgit v0.10.2 From db652e4b36e5f1e5f49a4a49caf3aa365fe851c4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 6 Nov 2011 22:58:31 +0100 Subject: net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params() If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl Reviewed-by: Srivatsa S. Bhat Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index dae8dbb..8a3f959 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1469,7 +1469,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, s32 rssi, const u8 *ie_buf, size_t ie_len, u16 beacon_period, u16 cap_info_bitmap, u8 band) { - struct mwifiex_bssdescriptor *bss_desc = NULL; + struct mwifiex_bssdescriptor *bss_desc; int ret; unsigned long flags; u8 *beacon_ie; @@ -1484,6 +1484,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL); if (!beacon_ie) { + kfree(bss_desc); dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n"); return -ENOMEM; } -- cgit v0.10.2 From 24b9c373ab787ccacfa2c46736153708796f5cd6 Mon Sep 17 00:00:00 2001 From: "Janusz.Dziedzic@tieto.com" Date: Mon, 7 Nov 2011 09:47:47 +0200 Subject: mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic Reviewed-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ce962d2..8eaa746 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1354,12 +1354,12 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta, * Use MoreData flag to indicate whether there are * more buffered frames for this STA */ - if (!more_data) - hdr->frame_control &= - cpu_to_le16(~IEEE80211_FCTL_MOREDATA); - else + if (more_data || !skb_queue_empty(&frames)) hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control &= + cpu_to_le16(~IEEE80211_FCTL_MOREDATA); if (ieee80211_is_data_qos(hdr->frame_control) || ieee80211_is_qos_nullfunc(hdr->frame_control)) -- cgit v0.10.2 From 4dff523a913197e3314c7b0d08734ab037709093 Mon Sep 17 00:00:00 2001 From: Arek Lichwa Date: Wed, 26 Oct 2011 11:23:22 +0200 Subject: Bluetooth: Revert: Fix L2CAP connection establishment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index c1c597e..e0af723 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) goto encrypt; auth: - if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; if (!hci_conn_auth(conn, sec_level, auth_type)) -- cgit v0.10.2 From abf015f04614a3a7da43d35b55edc90189af4e6a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Nov 2011 19:04:36 +0000 Subject: Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage" This reverts commit 2b034922af2caa19df86f0c502e76cb6f6e910f9. Will Deacon reports: This is causing kexec to fail. The symptoms are that the .init.text section is not loaded as part of the new kernel image, so when we try to do the SMP/UP fixups we hit a whole sea of poison left there by the previous kernel. So my guess is that machine_kexec_prepare *is* too early for preparing the reboot_code_buffer and, unless anybody has a good reason not to, I'd like to revert the patch causing these problems. Reported-by: Will Deacon diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index c1b4463..e59bbd4 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { - unsigned long page_list; - void *reboot_code_buffer; - page_list = image->head & PAGE_MASK; - - reboot_code_buffer = page_address(image->control_code_page); - - /* Prepare parameters for reboot_code_buffer*/ - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; - - /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); return 0; } @@ -100,14 +82,31 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { + unsigned long page_list; unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + + page_list = image->head & PAGE_MASK; + /* we need both effective and real address here */ reboot_code_buffer_phys = page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); + /* Prepare parameters for reboot_code_buffer*/ + kexec_start_address = image->start; + kexec_indirection_page = page_list; + kexec_mach_type = machine_arch_type; + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + + /* copy our kernel relocation code to the control code page */ + memcpy(reboot_code_buffer, + relocate_new_kernel, relocate_new_kernel_size); + + + flush_icache_range((unsigned long) reboot_code_buffer, + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) -- cgit v0.10.2 From f3f668b0ef4399b67e60e4c10a30099d630a6206 Mon Sep 17 00:00:00 2001 From: Andrzej Kaczmarek Date: Mon, 7 Nov 2011 17:19:04 -0200 Subject: Bluetooth: Use miliseconds for L2CAP channel timeouts Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek Signed-off-by: Gustavo F. Padovan diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index ab90ae0..6cc18f3 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -39,8 +39,11 @@ #define L2CAP_DEFAULT_ACK_TO 200 #define L2CAP_LE_DEFAULT_MTU 23 -#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ -#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ +#define L2CAP_DISC_TIMEOUT (100) +#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ +#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ /* L2CAP socket address */ struct sockaddr_l2 { diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 8cd1291..5ea94a1 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -251,7 +251,7 @@ static void l2cap_chan_timeout(unsigned long arg) if (sock_owned_by_user(sk)) { /* sk is owned by user. Try again later */ - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); chan_put(chan); return; @@ -2488,7 +2488,7 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); break; } @@ -2661,7 +2661,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr default: sk->sk_err = ECONNRESET; - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT); l2cap_send_disconn_req(conn, chan, ECONNRESET); goto done; } @@ -2718,7 +2718,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -2752,7 +2752,7 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan,BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -3998,7 +3998,7 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt) if (encrypt == 0x00) { if (chan->sec_level == BT_SECURITY_MEDIUM) { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_ENC_TIMEOUT); } else if (chan->sec_level == BT_SECURITY_HIGH) l2cap_chan_close(chan, ECONNREFUSED); } else { @@ -4066,7 +4066,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) L2CAP_CONN_REQ, sizeof(req), &req); } else { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); } } else if (chan->state == BT_CONNECT2) { struct l2cap_conn_rsp rsp; @@ -4086,7 +4086,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) } } else { l2cap_state_change(chan, BT_DISCONN); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); res = L2CAP_CR_SEC_BLOCK; stat = L2CAP_CS_NO_INFO; } -- cgit v0.10.2 From a6f498a891c730327645a7afa10c5ae977de6fd8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 7 Nov 2011 15:50:32 -0500 Subject: NFS: Fix a regression in the referral code Fix a regression that was introduced by commit 0c2e53f11a6dae9e3af5f50f5ad0382e7c3e0cfa (NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()). In the case where the lookup gets an NFS4ERR_MOVED, we want to return the result of nfs4_get_referral(). Instead, that value is getting clobbered by the call to nfs4_handle_exception()... Reported-by: Tigran Mkrtchyan Tested-by: Tigran Mkrtchyan Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 069cb80..be2bbac 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2464,8 +2464,7 @@ static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qst case -NFS4ERR_BADNAME: return -ENOENT; case -NFS4ERR_MOVED: - err = nfs4_get_referral(dir, name, fattr, fhandle); - break; + return nfs4_get_referral(dir, name, fattr, fhandle); case -NFS4ERR_WRONGSEC: nfs_fixup_secinfo_attributes(fattr, fhandle); } -- cgit v0.10.2 From 5698eb4eda657fd4a74612a65cd5d583f35a5bdb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 Nov 2011 15:58:40 -0800 Subject: ARM: OMAP3: CPUidle: include The CPUidle use THIS_MODULE, so needs Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 4bf6e6e..2e0fa5a 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include -- cgit v0.10.2 From 406478dc911e16677fbd9c84d1d50cdffbc031ab Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:04 -0800 Subject: drm/i915: Turn on a required 3D clock gating bit on Sandybridge. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5a09416..b807275 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3444,6 +3444,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL2 0x9404 +# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) + #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9fa342e..2b2a764 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8148,6 +8148,15 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: -- cgit v0.10.2 From 9ca1d10d748e56964de95e3ed80211b192f56cf4 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 7 Nov 2011 16:07:05 -0800 Subject: drm/i915: Turn on another required clock gating bit on gen6. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b807275..a34e866 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3446,6 +3446,7 @@ #define GEN6_UCGCTL2 0x9404 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) +# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2b2a764..591eb0ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8154,8 +8154,13 @@ static void gen6_init_clock_gating(struct drm_device *dev) * some amount of runtime in the Mesa "fire" demo, and Unigine * Sanctuary and Tropics, and apparently anything else with * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. */ - I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* * According to the spec the following bits should be -- cgit v0.10.2 From 1258ea596fe0422272525d9ec8a25b703de4623f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core in OMAP2xxx HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6d72062..5160e35 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), .masters = omap2420_dss_masters, .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a2580d0..d02a44e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), .masters = omap2430_dss_masters, .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ -- cgit v0.10.2 From b8ac10d8b75843c9ddd6aadf70a0cdf8aa783659 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:09 -0700 Subject: ARM: OMAP2xxx: HWMOD: fix DSS clock data The OMAP2xxx HWMOD data currently contains two errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5160e35..74037a5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -965,6 +965,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { &omap2420_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -976,6 +980,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2420_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -985,7 +991,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1005,7 +1011,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { static struct omap_hwmod omap2420_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index d02a44e..6f03653 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1020,6 +1020,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { &omap2430_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1031,6 +1035,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2430_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1040,7 +1046,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1054,7 +1060,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { static struct omap_hwmod omap2430_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, -- cgit v0.10.2 From 8c3105ca1a42783b13930fbd375484ec8c72e608 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: Fix DSS reset DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. dss_core's opt-clocks is also missing dss_96m_fck, which is a DSS clock present only on OMAP3430, and thus required on OMAP3430 to finish the reset. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET and adds the dss_96m_fck opt-clock for dss_core in OMAP3 HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index bc9035e..45ccd4f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "video_clk", .clk = "dss_96m_fck" }, + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "sys_clk", .clk = "dss2_alwon_fck" }, + { .role = "tv_clk", .clk = "dss_tv_fck" }, + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, }; static struct omap_hwmod omap3430es1_dss_core_hwmod = { @@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, -- cgit v0.10.2 From 6c3d7e34d68ffae888d33bf364f447e0b415591f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:10 -0700 Subject: ARM: OMAP3: HWMOD: fix DSS clock data The OMAP3 HWMOD data currently contains these errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_dsi is missing ick and sys_clk - dss_venc is missing dss_96m_fck opt-clock, which is required on OMAP3430 - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 45ccd4f..4aaf0ca 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1492,6 +1492,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, + .clk = "dss_ick", .addr = omap3xxx_dss_dsi1_addrs, .fw = { .omap2 = { @@ -1508,6 +1509,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { &omap3xxx_l4_core__dss_dsi1, }; +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, @@ -1520,6 +1525,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_dsi1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap3xxx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), .flags = HWMOD_NO_IDLEST, @@ -1546,6 +1553,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { &omap3xxx_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1557,6 +1568,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap3xxx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1566,7 +1579,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, - .clk = "dss_tv_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1584,10 +1597,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { &omap3xxx_l4_core__dss_venc, }; +static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_alwon_fck", + .main_clk = "dss_tv_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1595,6 +1613,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_venc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), .slaves = omap3xxx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), .flags = HWMOD_NO_IDLEST, -- cgit v0.10.2 From 4247878efca76143aa015ed1142652056052abb8 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: remove extra clocks Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already defined as the dss main_clk, and thus is not needed as an opt-clock. Remove opt-clocks for dss_dispc, as dispc only uses the main_clk. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7695e5d..3b9f2d9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "dss_clk", .clk = "dss_dss_clk" }, { .role = "video_clk", .clk = "dss_48mhz_clk" }, }; @@ -1340,12 +1339,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { &omap44xx_l4_per__dss_dispc, }; -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, @@ -1359,8 +1352,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), }; -- cgit v0.10.2 From 37ad085527860397438f27c81a2cb13272378458 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:11 -0700 Subject: ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This causes the HWMOD frameworks boot-time reset to fail, possibly leaving the DSS hardware in undefined state. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag is actually not used on OMAP4, because dss_core hardware does not have soft-reset functionality and thus the HWMOD framework never resets nor waits for the reset to finish. However, while the flag is not strictly needed currently, I think it represents the HW correctly: all the DSS clocks should be enabled after power-on to allow DSS hardware to finish its reset. A custom reset function will be added in the following patches which manages this correctly for OMAP4. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b9f2d9..b82720a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1245,6 +1245,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap44xx_dss_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap44xx_dss_hwmod_class, .clkdm_name = "l3_dss_clkdm", .main_clk = "dss_dss_clk", -- cgit v0.10.2 From 4d0698d98f501b86d3bef38c46a54a702e0469a0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP4: HWMOD: fix DSS clock data The OMAP4 HWMOD data currently contains errors with DSS clocks: dss_hdmi and dss_venc have their main_clks wrong. The clocks should be dss_48mhz_clk and dss_tv_clk, respectively. These problems were temporarily fixed with the DSS patches 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), and df5d3ed23cf73ee0763a8963003bda9b69d9620f ("OMAP: DSS2: HDMI: fix hdmi clock name"), which can be reverted after this patch. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b82720a..cadf0bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1240,7 +1240,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "video_clk", .clk = "dss_48mhz_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, }; static struct omap_hwmod omap44xx_dss_hwmod = { @@ -1616,7 +1616,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, - .main_clk = "dss_dss_clk", + .main_clk = "dss_48mhz_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, @@ -1777,7 +1777,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", + .main_clk = "dss_tv_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, -- cgit v0.10.2 From 3ce32676bb355420ceeda57b73dd84df0ff5ad6f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:12 -0700 Subject: ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss OMAP2/3 dss_core has a reset status flag in sysstatus register. Add SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c451729..d78c132 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -43,7 +43,8 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .sysc_fields = &omap_hwmod_sysc_type1, }; -- cgit v0.10.2 From 13662dc5b177d68885695ef513dd4ae0e4d2a099 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 03:16:13 -0700 Subject: ARM: OMAP: HWMOD: Unify DSS resets for OMAPs This patch adds a custom DSS reset function used on OMAPs from OMAP2 forward. The function doesn't actually do a reset, it only waits for the reset to complete. The reason for this is that on OMAP4 there is no possibility to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets all the other DSS modules also, thus breaking the HWMOD model where every DSS module is handled independently. This fixes the problem with DSS reset on OMAP4, caused by the fact that because there's no SW reset for dss_core on OMAP4, the HWMOD framework doesn't try to reset dss_core and thus the DSS clocks were never enabled at the same time. This causes causes the HWMOD reset to fail for dss_dispc and dss_rfbi. The common reset function will also allow us to fix another problem in the future: before doing a reset we need to disable DSS outputs, which are in some cases enabled by the bootloader, as otherwise DSS HW seems to get more or less stuck, requiring a power reset to recover. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o unconditionally to avoid an error when !CONFIG_OMAP2_DSS] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 69ab1c0..b009f17 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o + common.o gpio.o dma.o wd_timer.o display.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o -disp-$(CONFIG_OMAP2_DSS) := display.o -obj-y += $(disp-m) $(disp-y) - obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index adb2756..941b545 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "control.h" @@ -172,3 +173,37 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } + +#define MAX_MODULE_SOFTRESET_WAIT 10000 +int omap_dss_reset(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int c = 0; + int i, r; + + if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { + pr_err("dss_core: hwmod data doesn't contain reset data\n"); + return -EINVAL; + } + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_enable(oc->_clk); + + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("dss_core: waiting for reset to finish failed\n"); + else + pr_debug("dss_core: softreset done\n"); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_disable(oc->_clk); + + r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + + return r; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index d78c132..c11273d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -11,6 +11,7 @@ #include #include #include +#include #include @@ -51,6 +52,7 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { struct omap_hwmod_class omap2_dss_hwmod_class = { .name = "dss", .sysc = &omap2_dss_sysc, + .reset = omap_dss_reset, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cadf0bb..3b04d63 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { static struct omap_hwmod_class omap44xx_dss_hwmod_class = { .name = "dss", .sysc = &omap44xx_dss_sysc, + .reset = omap_dss_reset, }; /* dss */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index c50df48..3ff3e36 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -30,6 +30,7 @@ #include #include +#include struct sys_timer; @@ -55,6 +56,8 @@ void am35xx_init_early(void); void ti816x_init_early(void); void omap4430_init_early(void); +extern int omap_dss_reset(struct omap_hwmod *); + void omap_sram_init(void); /* diff --git a/include/video/omapdss.h b/include/video/omapdss.h index b66ebb2..378c7ed 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -307,15 +307,8 @@ struct omap_dss_board_info { void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask); }; -#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) /* Init with the board info */ extern int omap_display_init(struct omap_dss_board_info *board_data); -#else -static inline int omap_display_init(struct omap_dss_board_info *board_data) -{ - return 0; -} -#endif struct omap_display_platform_data { struct omap_dss_board_info *board_data; -- cgit v0.10.2 From b923d40dd4211c4ef7d4efa2bd81b7ca1d8744c1 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 6 Oct 2011 18:04:08 -0600 Subject: ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader Resetting DISPC when a DISPC output is enabled causes the DSS to go into an inconsistent state. Thus if the bootloader has enabled a display, the hwmod code cannot reset the DISPC module just like that, but the outputs need to be disabled first. Add function dispc_disable_outputs() which disables all active overlay manager and ensure all frame transfers are completed. Modify omap_dss_reset() to call this function and clear DSS_CONTROL, DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the DSS2 driver starts. This resolves the hang issue(caused by a L3 error during boot) seen on the beagle board C3, which has a factory bootloader that enables display. The issue is resolved with this patch. Thanks to Tomi and Sricharan for some additional testing. Acked-by: Tomi Valkeinen Tested-by: R, Sricharan Signed-off-by: Archit Taneja [paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed cpu_is_omap*() calls and converted to dev_attr] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 941b545..dce9905 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,32 @@ #include #include "control.h" +#include "display.h" + +#define DISPC_CONTROL 0x0040 +#define DISPC_CONTROL2 0x0238 +#define DISPC_IRQSTATUS 0x0018 + +#define DSS_SYSCONFIG 0x10 +#define DSS_SYSSTATUS 0x14 +#define DSS_CONTROL 0x40 +#define DSS_SDI_CONTROL 0x44 +#define DSS_PLL_CONTROL 0x48 + +#define LCD_EN_MASK (0x1 << 0) +#define DIGIT_EN_MASK (0x1 << 1) + +#define FRAMEDONE_IRQ_SHIFT 0 +#define EVSYNC_EVEN_IRQ_SHIFT 2 +#define EVSYNC_ODD_IRQ_SHIFT 3 +#define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONETV_IRQ_SHIFT 24 + +/* + * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC + * reset before deciding that something has gone wrong + */ +#define FRAMEDONE_IRQ_TIMEOUT 100 static struct platform_device omap_display_device = { .name = "omapdss", @@ -174,6 +200,90 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } +static void dispc_disable_outputs(void) +{ + u32 v, irq_mask = 0; + bool lcd_en, digit_en, lcd2_en = false; + int i; + struct omap_dss_dispc_dev_attr *da; + struct omap_hwmod *oh; + + oh = omap_hwmod_lookup("dss_dispc"); + if (!oh) { + WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); + return; + } + + if (!oh->dev_attr) { + pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); + return; + } + + da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; + + /* store value of LCDENABLE and DIGITENABLE bits */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + lcd_en = v & LCD_EN_MASK; + digit_en = v & DIGIT_EN_MASK; + + /* store value of LCDENABLE for LCD2 */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + lcd2_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en)) + return; /* no managers currently enabled */ + + /* + * If any manager was enabled, we need to disable it before + * DSS clocks are disabled or DISPC module is reset + */ + if (lcd_en) + irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; + + if (digit_en) { + if (da->has_framedonetv_irq) { + irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; + } else { + irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | + 1 << EVSYNC_ODD_IRQ_SHIFT; + } + } + + if (lcd2_en) + irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + + /* + * clear any previous FRAMEDONE, FRAMEDONETV, + * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + */ + omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); + + /* disable LCD and TV managers */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); + omap_hwmod_write(v, oh, DISPC_CONTROL); + + /* disable LCD2 manager */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL2); + } + + i = 0; + while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != + irq_mask) { + i++; + if (i > FRAMEDONE_IRQ_TIMEOUT) { + pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + break; + } + mdelay(1); + } +} + #define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { @@ -190,6 +300,20 @@ int omap_dss_reset(struct omap_hwmod *oh) if (oc->_clk) clk_enable(oc->_clk); + dispc_disable_outputs(); + + /* clear SDI registers */ + if (cpu_is_omap3430()) { + omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); + omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); + } + + /* + * clear DSS_CONTROL register to switch DSS clock sources to + * PRCM clock, if any + */ + omap_hwmod_write(0x0, oh, DSS_CONTROL); + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h new file mode 100644 index 0000000..b871b017 --- /dev/null +++ b/arch/arm/mach-omap2/display.h @@ -0,0 +1,29 @@ +/* + * display.h - OMAP2+ integration-specific DSS header + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H +#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H + +#include + +struct omap_dss_dispc_dev_attr { + u8 manager_count; + bool has_framedonetv_irq; +}; + +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 74037a5..a5409ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -943,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { .slaves = omap2420_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 6f03653..c4f56cb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1004,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { .slaves = omap2430_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4aaf0ca..7f8915a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1462,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .slaves = omap3xxx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3b04d63..daaf165 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1327,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { { } }; +static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { + .manager_count = 3, + .has_framedonetv_irq = 1 +}; + /* l4_per -> dss_dispc */ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { .master = &omap44xx_l4_per_hwmod, @@ -1357,6 +1362,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { }, .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .dev_attr = &omap44xx_dss_dispc_dev_attr }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index de832eb..51e5418 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, }; +struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { + .manager_count = 2, + .has_framedonetv_irq = 0 +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 39a7c37..ad5d8f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,8 @@ #include +#include "display.h" + /* Common address space across OMAP2xxx */ extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; @@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class; extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class; extern struct omap_hwmod_class omap2xxx_mcspi_class; +extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr; + #endif -- cgit v0.10.2 From 617d1017545c27a56229483cc1d689eff6c38561 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Sat, 29 Oct 2011 15:45:56 +0200 Subject: MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check Cause is a misplaced bracket. The code strlen(buf+1) will be two bytes less than strlen(buf)+1 The +1 is in this code to reserve space for an additional space character. [ralf@linux-mips.org: Thomas' original patch fixed the issue only for Yosemite but the same bug exists also in Emma.] Signed-off-by: Thomas Jarosch Patchwork: https://patchwork.linux-mips.org/patch/2861/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c index 708f087..cae4225 100644 --- a/arch/mips/emma/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -50,7 +50,7 @@ void __init prom_init(void) /* arg[0] is "g", the rest is boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; strcat(arcs_cmdline, arg[i]); diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index cf4c868..dcc926e 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -102,7 +102,7 @@ void __init prom_init(void) /* Get the boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >= + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; -- cgit v0.10.2 From 798580815126c899616146f286d5cc259abb5e16 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Nov 2011 10:45:57 +0000 Subject: MIPS: NXP: Remove unused source files. The NXP code was moved for 2.6.36 but two files survived unused in the old location. Signed-off-by: Ralf Baechle diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c deleted file mode 100644 index 98e86dd..0000000 --- a/arch/mips/nxp/pnx8550/common/pci.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - -static struct resource pci_io_resource = { - .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ - .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PNX8550_PCIMEM, - .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops pnx8550_pci_ops; - -static struct pci_controller pnx8550_controller = { - .pci_ops = &pnx8550_pci_ops, - .io_map_base = PNX8550_PORT_BASE, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -static inline unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -static int __init pnx8550_pci_setup(void) -{ - int pci_mem_code; - int mem_size = get_system_mem_size() >> 20; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* Calc the PCI mem size code */ - if (mem_size >= 128) - pci_mem_code = SIZE_128M; - else if (mem_size >= 64) - pci_mem_code = SIZE_64M; - else if (mem_size >= 32) - pci_mem_code = SIZE_32M; - else - pci_mem_code = SIZE_16M; - - /* Set PCI_XIO registers */ - outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); - outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); - outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); - outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); - - /* Send memory transaction via PCI_BASE2 */ - outl(0x00000001, PCI_BASE | PCI_IO); - - /* Unlock the setup register */ - outl(0xca, PCI_BASE | PCI_UNLOCKREG); - - /* - * BAR0 of PNX8550 (pci base 10) must be zero in order for ide - * to work, and in order for bus_to_baddr to work without any - * hacks. - */ - outl(0x00000000, PCI_BASE | PCI_BASE10); - - /* - *These two bars are set by default or the boot code. - * However, it's safer to set them here so we're not boot - * code dependent. - */ - outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ - outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ - - outl(PCI_EN_TA | - PCI_EN_PCI2MMI | - PCI_EN_XIO | - PCI_SETUP_BASE18_SIZE(SIZE_32M) | - PCI_SETUP_BASE18_EN | - PCI_SETUP_BASE14_EN | - PCI_SETUP_BASE10_PREF | - PCI_SETUP_BASE10_SIZE(pci_mem_code) | - PCI_SETUP_CFGMANAGE_EN | - PCI_SETUP_PCIARB_EN, - PCI_BASE | - PCI_SETUP); /* PCI_SETUP */ - outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ - - register_pci_controller(&pnx8550_controller); - - return 0; -} - -arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c deleted file mode 100644 index 71adac3..0000000 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(PNX8550_PORT_BASE); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } -} -- cgit v0.10.2 From df55a66addf87bc21ef5678bea238f2c1b2db48a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 4 Nov 2011 11:17:46 +0100 Subject: MIPS: BCM47xx: fix build with GENERIC_GPIO configuration Since eb9ae7f2 (gpio: fix build error in include/asm-generic/gpio.h) the generic version of gpio.h calls __gpio_{set,get}_value which we do not define. Get rid of asm-generic/gpio.h and define the missing stubs directly for BCM47xx to build. Reported-by: Ralf Baechle To: linux-mips@linux-mips.org CC: Hauke Mehrtens Signed-off-by: Florian Fainelli Patchwork: https://patchwork.linux-mips.org/patch/2885/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h index 76961ca..2ef17e8 100644 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio) return -EINVAL; } +#define gpio_get_value_cansleep gpio_get_value + static inline void gpio_set_value(unsigned gpio, int value) { switch (bcm47xx_bus_type) { @@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value) } } +#define gpio_set_value_cansleep gpio_set_value + +static inline int gpio_cansleep(unsigned gpio) +{ + return 0; +} + +static inline int gpio_is_valid(unsigned gpio) +{ + return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES); +} + + static inline int gpio_direction_input(unsigned gpio) { switch (bcm47xx_bus_type) { @@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value) } -/* cansleep wrappers */ -#include - #endif /* __BCM47XX_GPIO_H */ -- cgit v0.10.2 From e63fb7a9dae820b3ff6754f794fd713f83e32fff Mon Sep 17 00:00:00 2001 From: Venkat Subbiah Date: Mon, 3 Oct 2011 13:31:10 -0700 Subject: MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD This is to exclude it from force threading to allow RT patch set to work. And while on this line * Remove IRQF_DISABLED as as this flag is NOOP * Add IRQF_PERCPU as this is a per cpu interrupt. Signed-off-by: Venkat Subbiah Acked-by: David Daney To: linux-mips@linux-mips.org To: linux-rt-users@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2817/ Acked-by: Thomas Gleixner Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 8b60642..efcfff4 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus) * the other bits alone. */ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); - if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, - "SMP-IPI", mailbox_interrupt)) { + if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI", + mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } } -- cgit v0.10.2 From d13431ca3eb2a2c14314f04813cdc11cd869f150 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Tue, 8 Nov 2011 14:30:22 +0800 Subject: Bluetooth: Add support for Broadcom BCM20702A0 Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f9b7260..fe4ebc3 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -100,6 +100,9 @@ static struct usb_device_id btusb_table[] = { /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, + /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x413c, 0x8197) }, + { } /* Terminating entry */ }; -- cgit v0.10.2 From 66f5ddf30a59f811818656cb2833c80da0340cfa Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Thu, 3 Nov 2011 11:46:47 -0700 Subject: x86/mce: Make mce_chrdev_ops 'static const' Arjan would like to make struct file_operations const, but mce-inject directly writes to the mce_chrdev_ops to install its write handler. In an ideal world mce-inject would have its own character device, but we have a sizable legacy of test scripts that hardwire "/dev/mcelog", so it would be painful to switch to a separate device now. Instead, this patch switches to a stub function in the mce code, with a registration helper that mce-inject can call when it is loaded. Note that this would also allow for a sane process to allow mce-inject to be unloaded again (with an unregister function, and appropriate module_{get,put}() calls), but that is left for potential future patches. Reported-by: Arjan van de Ven Signed-off-by: Tony Luck Link: http://lkml.kernel.org/r/4eb2e1971326651a3b@agluck-desktop.sc.intel.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index c9321f3..0e8ae57 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -201,7 +201,10 @@ int mce_notify_irq(void); void mce_notify_process(void); DECLARE_PER_CPU(struct mce, injectm); -extern struct file_operations mce_chrdev_ops; + +extern void register_mce_write_callback(ssize_t (*)(struct file *filp, + const char __user *ubuf, + size_t usize, loff_t *off)); /* * Exception handler diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index 6199232..319882e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -208,7 +208,7 @@ static int inject_init(void) if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL)) return -ENOMEM; printk(KERN_INFO "Machine check injector initialized\n"); - mce_chrdev_ops.write = mce_write; + register_mce_write_callback(mce_write); register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0, "mce_notify"); return 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 362056a..2af127d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1634,16 +1634,35 @@ static long mce_chrdev_ioctl(struct file *f, unsigned int cmd, } } -/* Modified in mce-inject.c, so not static or const */ -struct file_operations mce_chrdev_ops = { +static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf, + size_t usize, loff_t *off); + +void register_mce_write_callback(ssize_t (*fn)(struct file *filp, + const char __user *ubuf, + size_t usize, loff_t *off)) +{ + mce_write = fn; +} +EXPORT_SYMBOL_GPL(register_mce_write_callback); + +ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf, + size_t usize, loff_t *off) +{ + if (mce_write) + return mce_write(filp, ubuf, usize, off); + else + return -EINVAL; +} + +static const struct file_operations mce_chrdev_ops = { .open = mce_chrdev_open, .release = mce_chrdev_release, .read = mce_chrdev_read, + .write = mce_chrdev_write, .poll = mce_chrdev_poll, .unlocked_ioctl = mce_chrdev_ioctl, .llseek = no_llseek, }; -EXPORT_SYMBOL_GPL(mce_chrdev_ops); static struct miscdevice mce_chrdev_device = { MISC_MCELOG_MINOR, -- cgit v0.10.2 From f1e10354fc2a12773e5e8efcf841380aa57d4aa5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 5 Nov 2011 14:47:19 +0800 Subject: ASoC: wm9081: Fix reading wrong register for setting VMID 2*240k VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index 3cd35a0..fe65618 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -818,7 +818,7 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, } /* VMID 2*240k */ - reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); + reg = snd_soc_read(codec, WM9081_VMID_CONTROL); reg &= ~WM9081_VMID_SEL_MASK; reg |= 0x04; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); -- cgit v0.10.2 From adf463626ad8e0a2cdbe17d8bb64c1d9d0ac160d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 5 Nov 2011 14:49:21 +0800 Subject: ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL register WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index fe65618..4a398c3 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -807,7 +807,6 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, mdelay(100); /* Normal bias enable & soft start off */ - reg |= WM9081_BIAS_ENA; reg &= ~WM9081_VMID_RAMP; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); @@ -830,14 +829,15 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_OFF: - /* Startup bias source */ + /* Startup bias source and disable bias */ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1); reg |= WM9081_BIAS_SRC; + reg &= ~WM9081_BIAS_ENA; snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg); - /* Disable VMID and biases with soft ramping */ + /* Disable VMID with soft ramping */ reg = snd_soc_read(codec, WM9081_VMID_CONTROL); - reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA); + reg &= ~WM9081_VMID_SEL_MASK; reg |= WM9081_VMID_RAMP; snd_soc_write(codec, WM9081_VMID_CONTROL, reg); -- cgit v0.10.2 From 08f2e6312c67fed80df9342e06ad36daf11eb80b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 8 Nov 2011 18:29:15 +0800 Subject: iommu: omap: Fix compile failure Fix compile failure in drivers/iommu/omap-iommu-debug.c because of missing module.h include. Signed-off-by: Ming Lei Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 9c192e7..288da5c 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c index e8fdb88..46be456 100644 --- a/drivers/iommu/omap-iovmm.c +++ b/drivers/iommu/omap-iovmm.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include -- cgit v0.10.2 From 10953db8e1a278742ef7e64a3d1491802bcfa98b Mon Sep 17 00:00:00 2001 From: hayeswang Date: Mon, 7 Nov 2011 20:44:37 +0000 Subject: r8169: increase the delay parameter of pm_schedule_suspend The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 92b45f0..6f06aa1 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1292,7 +1292,7 @@ static void __rtl8169_check_link_status(struct net_device *dev, netif_carrier_off(dev); netif_info(tp, ifdown, dev, "link down\n"); if (pm) - pm_schedule_suspend(&tp->pci_dev->dev, 100); + pm_schedule_suspend(&tp->pci_dev->dev, 5000); } spin_unlock_irqrestore(&tp->lock, flags); } -- cgit v0.10.2 From c457338d7acd3823e765b684a62294cfda9d2f55 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Tue, 8 Nov 2011 04:41:42 +0000 Subject: ipv6: drop packets when source address is multicast RFC 4291 Section 2.7 says Multicast addresses must not be used as source addresses in IPv6 packets - drop them on input so we don't process the packet further. Signed-off-by: Brian Haley Reported-and-Tested-by: Kumar Sanghvi Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 027c7ff..a46c64e 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -111,6 +111,14 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt ipv6_addr_loopback(&hdr->daddr)) goto err; + /* + * RFC4291 2.7 + * Multicast addresses must not be used as source addresses in IPv6 + * packets or appear in any Routing header. + */ + if (ipv6_addr_is_multicast(&hdr->saddr)) + goto err; + skb->transport_header = skb->network_header + sizeof(*hdr); IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr); -- cgit v0.10.2 From ea1649dea95fb270af94f75e842402c4cfbfc15f Mon Sep 17 00:00:00 2001 From: Nico Erfurth Date: Tue, 8 Nov 2011 07:30:40 +0000 Subject: Fix incorrect usage of NET_IP_ALIGN The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth Tested-by: Phil Sutter Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 22a7cf9..a5b9b12 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -51,6 +51,7 @@ #define USB_VENDOR_ID_SMSC (0x0424) #define USB_PRODUCT_ID_LAN7500 (0x7500) #define USB_PRODUCT_ID_LAN7505 (0x7505) +#define RXW_PADDING 2 #define check_warn(ret, fmt, args...) \ ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); }) @@ -1088,13 +1089,13 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); le32_to_cpus(&rx_cmd_b); - skb_pull(skb, 4 + NET_IP_ALIGN); + skb_pull(skb, 4 + RXW_PADDING); packet = skb->data; /* get the packet length */ - size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN; - align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; + size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING; + align_count = (4 - ((size + RXW_PADDING) % 4)) % 4; if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { netif_dbg(dev, rx_err, dev->net, -- cgit v0.10.2 From 4f1a1eb530071c39fb239fd26c912a64284b1408 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Tue, 8 Nov 2011 09:59:01 -0500 Subject: MIPS: Kernel hangs occasionally during boot. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. Signed-off-by: Al Cooper Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2911/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 98c5a97..e2d8e19 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) /* * Compare interrupt can be routed and latched outside the core, - * so a single execution hazard barrier may not be enough to give - * it time to clear as seen in the Cause register. 4 time the - * pipeline depth seems reasonably conservative, and empirically - * works better in configurations with high CPU/bus clock ratios. + * so wait up to worst case number of cycle counter ticks for timer interrupt + * changes to propagate to the cause register. */ - -#define compare_change_hazard() \ - do { \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - } while (0) +#define COMPARE_INT_SEEN_TICKS 50 int c0_compare_int_usable(void) { @@ -126,8 +117,12 @@ int c0_compare_int_usable(void) * IP7 already pending? Try to clear it by acking the timer. */ if (c0_compare_int_pending()) { - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; } @@ -136,7 +131,7 @@ int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - compare_change_hazard(); + back_to_back_c0_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -145,12 +140,17 @@ int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ - compare_change_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (c0_compare_int_pending()) + break; if (!c0_compare_int_pending()) return 0; - - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; -- cgit v0.10.2 From 71e63e748ee6f4bad482b8021386eeb74f6e47f1 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 4 Nov 2011 08:10:09 +0100 Subject: ARM: 7149/1: spi/pl022: Enable clock in probe Make sure we enable the clock before leaving probe. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Russell King diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index f103e47..5559b22 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2184,6 +2184,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) goto err_clk_prep; } + status = clk_enable(pl022->clk); + if (status) { + dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n"); + goto err_no_clk_en; + } + /* Disable SSP */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); @@ -2237,6 +2243,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) free_irq(adev->irq[0], pl022); err_no_irq: + clk_disable(pl022->clk); + err_no_clk_en: clk_unprepare(pl022->clk); err_clk_prep: clk_put(pl022->clk); -- cgit v0.10.2 From 8428e84d42179c2a00f5f6450866e70d802d1d05 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 7 Nov 2011 18:05:53 +0100 Subject: ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors Recent gcc versions generate unaligned accesses by default on ARMv6 and later processors. This patch ensures that the SCTLR.A bit is always cleared on such processors to avoid kernel traping before alignment_init() is called. Signed-off-by: Catalin Marinas Tested-by: John Linn Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 566c54c..08c82fd 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -360,7 +360,7 @@ __secondary_data: * r13 = *virtual* address to jump to upon completion */ __enable_mmu: -#ifdef CONFIG_ALIGNMENT_TRAP +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else bic r0, r0, #CR_A -- cgit v0.10.2 From 5f300acd8ae9f3d4585154370012ffc5c665330f Mon Sep 17 00:00:00 2001 From: Dirk B Date: Tue, 8 Nov 2011 18:16:39 +0100 Subject: ARM: 7152/1: distclean: Remove generated .dtb files The patch 'arm/dt: Add dtb make rule' adds support to create a .dtb file. But this is never removed afterwards. Remove the generated .dtb file if 'distclean' is called. Signed-off-by: Dirk Behme Acked-by: Rob Herring Acked-by: Grant Likely Cc: Shawn Guo Cc: Jason Liu Signed-off-by: Russell King diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 176062a..5df26a9 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) +clean-files := *.dtb + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ -- cgit v0.10.2 From 042f36e1560cedfe524607791fa44607a3121f63 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 8 Nov 2011 13:27:31 -0500 Subject: IB/qib: Don't use schedule_work() It was mistakenly introduced by dde05cbdf8b1 ("IB/qib: Hold links until tuning data is available"). Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 5bd2162..8b46b60 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -5241,7 +5241,7 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) off */ if (ppd->dd->flags & QIB_HAS_QSFP) { qd->t_insert = get_jiffies_64(); - schedule_work(&qd->work); + queue_work(ib_wq, &qd->work); } spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) -- cgit v0.10.2 From e50e705ca71db82a78a3e13fb7abf6b2171ac9c7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Nov 2011 13:59:44 -0500 Subject: l2tp: fix l2tp_udp_recv_core() pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index bf8d50c..cf0f308 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -756,9 +756,6 @@ static int l2tp_udp_recv_core(struct l2tp_tunnel *tunnel, struct sk_buff *skb, goto error; } - /* Point to L2TP header */ - optr = ptr = skb->data; - /* Trace packet contents, if enabled */ if (tunnel->debug & L2TP_MSG_DATA) { length = min(32u, skb->len); @@ -769,12 +766,15 @@ static int l2tp_udp_recv_core(struct l2tp_tunnel *tunnel, struct sk_buff *skb, offset = 0; do { - printk(" %02X", ptr[offset]); + printk(" %02X", skb->data[offset]); } while (++offset < length); printk("\n"); } + /* Point to L2TP header */ + optr = ptr = skb->data; + /* Get L2TP header flags */ hdrflags = ntohs(*(__be16 *) ptr); -- cgit v0.10.2 From 59caa5612ce916c4902c753aa61429eb76ac2b21 Mon Sep 17 00:00:00 2001 From: oftedal Date: Mon, 7 Nov 2011 11:47:53 +0000 Subject: sunhme: Allow usage on SBI based SBus systems To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index c517dac..cf14ab9 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2637,7 +2637,7 @@ static int __devinit happy_meal_sbus_probe_one(struct platform_device *op, int i sbus_dp = op->dev.parent->of_node; /* We can match PCI devices too, do not accept those here. */ - if (strcmp(sbus_dp->name, "sbus")) + if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi")) return err; if (is_qfe) { -- cgit v0.10.2 From 6d67e9beb68bc6712b042c9723cecc87dc8e3f4c Mon Sep 17 00:00:00 2001 From: Feng King Date: Sat, 5 Nov 2011 04:23:23 +0000 Subject: tcp: Fix comments for Nagle algorithm TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small segments will always pass Nagle test regardless of TCP_NODELAY option. Signed-off-by: Feng King Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 980b98f..63170e29 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1382,7 +1382,7 @@ static inline int tcp_minshall_check(const struct tcp_sock *tp) /* Return 0, if packet can be sent now without violation Nagle's rules: * 1. It is full sized. * 2. Or it contains FIN. (already checked by caller) - * 3. Or TCP_NODELAY was set. + * 3. Or TCP_CORK is not set, and TCP_NODELAY is set. * 4. Or TCP_CORK is not set, and all sent packets are ACKed. * With Minshall's modification: all sent small packets are ACKed. */ -- cgit v0.10.2 From 20db93c34095553a01a9c31136658917bf1fa5d5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Nov 2011 14:21:44 -0500 Subject: net: min_pmtu default is 552 Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index cb7f314..f049a1c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN default FALSE min_pmtu - INTEGER - default 562 - minimum discovered Path MTU + default 552 - minimum discovered Path MTU route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase -- cgit v0.10.2 From 2bc8ca40f951163b3bb75949479e2755c12c1b96 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 11 Oct 2011 01:12:02 +0000 Subject: ipv4: Fix inetpeer expire time information As we update the learned pmtu informations on demand, we might report a nagative expiration time value to userspace if the pmtu informations are already expired and we have not send a packet to that inetpeer after expiration. With this patch we send a expire time of null to userspace after expiration until the next packet is send to that inetpeer. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 155138d..511f4a7 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2845,7 +2845,7 @@ static int rt_fill_info(struct net *net, struct rtable *rt = skb_rtable(skb); struct rtmsg *r; struct nlmsghdr *nlh; - long expires = 0; + unsigned long expires = 0; const struct inet_peer *peer = rt->peer; u32 id = 0, ts = 0, tsage = 0, error; @@ -2902,8 +2902,12 @@ static int rt_fill_info(struct net *net, tsage = get_seconds() - peer->tcp_ts_stamp; } expires = ACCESS_ONCE(peer->pmtu_expires); - if (expires) - expires -= jiffies; + if (expires) { + if (time_before(jiffies, expires)) + expires -= jiffies; + else + expires = 0; + } } if (rt_is_input_route(rt)) { -- cgit v0.10.2 From c26887d2a48600bfa87a27ce41ff78828bd7243c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Nov 2011 09:20:07 +0100 Subject: cfg80211: fix missing kernel-doc Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 92cf1c2..95852e3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -456,6 +456,9 @@ enum station_parameters_apply_mask { * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the * QoS info field (but already shifted down) + * @sta_modify_mask: bitmap indicating which parameters changed + * (for those that don't have a natural "no change" value), + * see &enum station_parameters_apply_mask */ struct station_parameters { u8 *supported_rates; @@ -615,6 +618,7 @@ struct sta_bss_parameters { * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. + * @sta_flags: station flags mask & values */ struct station_info { u32 filled; -- cgit v0.10.2 From a59be0811c322f80aaa886b144239393efece42d Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Tue, 8 Nov 2011 14:01:13 +0100 Subject: ath: Fix NULL ptr dereference in ath_reg_apply_world_flags This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 028310f..f1be57f 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -253,6 +253,8 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; /* * If no country IE has been received always enable active scan -- cgit v0.10.2 From cc438fccd5783c9f7b4c4858358ac897dcf8a58d Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Tue, 8 Nov 2011 15:54:46 +0200 Subject: wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira Acked-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 128ccb7..fc29c67 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -559,7 +559,7 @@ wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, break; } /* Fail if SSID isn't present in the filters */ - if (j == req->n_ssids) { + if (j == cmd->n_ssids) { ret = -EINVAL; goto out_free; } -- cgit v0.10.2 From 8ff8584e51d4d3fbe08ede413c4a221223766323 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 8 Nov 2011 14:54:55 -0800 Subject: MIPS: Hook up process_vm_readv and process_vm_writev system calls. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2918/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index ecea787..d8dad53 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -365,16 +365,18 @@ #define __NR_syncfs (__NR_Linux + 342) #define __NR_sendmmsg (__NR_Linux + 343) #define __NR_setns (__NR_Linux + 344) +#define __NR_process_vm_readv (__NR_Linux + 345) +#define __NR_process_vm_writev (__NR_Linux + 346) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 344 +#define __NR_Linux_syscalls 346 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 344 +#define __NR_O32_Linux_syscalls 346 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -686,16 +688,18 @@ #define __NR_syncfs (__NR_Linux + 301) #define __NR_sendmmsg (__NR_Linux + 302) #define __NR_setns (__NR_Linux + 303) +#define __NR_process_vm_readv (__NR_Linux + 304) +#define __NR_process_vm_writev (__NR_Linux + 305) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 303 +#define __NR_Linux_syscalls 305 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 303 +#define __NR_64_Linux_syscalls 305 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1012,16 +1016,18 @@ #define __NR_syncfs (__NR_Linux + 306) #define __NR_sendmmsg (__NR_Linux + 307) #define __NR_setns (__NR_Linux + 308) +#define __NR_process_vm_readv (__NR_Linux + 309) +#define __NR_process_vm_writev (__NR_Linux + 310) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 308 +#define __NR_Linux_syscalls 310 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 308 +#define __NR_N32_Linux_syscalls 310 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 4792065..a632bc1 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -591,6 +591,8 @@ einval: li v0, -ENOSYS sys sys_syncfs 1 sys sys_sendmmsg 4 sys sys_setns 2 + sys sys_process_vm_readv 6 /* 4345 */ + sys sys_process_vm_writev 6 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index fb7334b..3b5a5e9 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -430,4 +430,6 @@ sys_call_table: PTR sys_syncfs PTR sys_sendmmsg PTR sys_setns + PTR sys_process_vm_readv + PTR sys_process_vm_writev /* 5305 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 6de1f59..6be6f70 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -430,4 +430,6 @@ EXPORT(sysn32_call_table) PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv + PTR compat_sys_process_vm_writev /* 6310 */ .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 1d81316..5422855 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -548,4 +548,6 @@ sys_call_table: PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv /* 4345 */ + PTR compat_sys_process_vm_writev .size sys_call_table,.-sys_call_table -- cgit v0.10.2 From 76ee4557137ce12a60a1e1a070ed341182163a64 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 8 Nov 2011 19:57:59 +0900 Subject: ARM: EXYNOS: Fix compiler error with THIS_MODULE CC arch/arm/mach-exynos/cpuidle.o arch/arm/mach-exynos/cpuidle.c:36: error: 'THIS_MODULE' undeclared here (not in a function) arch/arm/mach-exynos/cpuidle.c: In function 'exynos4_enter_idle': arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'before' isn't known arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'after' isn't known arch/arm/mach-exynos/cpuidle.c:46: error: implicit declaration of function 'do_gettimeofday' arch/arm/mach-exynos/cpuidle.c:52: error: 'USEC_PER_SEC' undeclared (first use in this function) arch/arm/mach-exynos/cpuidle.c:52: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/cpuidle.c:52: error: for each function it appears in.) arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'after' arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'before' make[1]: *** [arch/arm/mach-exynos/cpuidle.o] Error 1 Signed-off-by: Kyungmin Park [kgene.kim@samsung.com: Fixed as per Stephen's suggestion] Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 35f6502..4ebb382 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include -- cgit v0.10.2 From e0e20753c15fc418d94fee826af394907df856d8 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 27 Oct 2011 20:38:24 -0700 Subject: pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list" when pinctl subsystem is not selected, when compiling drivers including the include/linux/pinctrl/pinctrl.h, we will get the warning as below: In file included from include/linux/pinctrl/pinmux.h:17, from drivers/tty/serial/sirfsoc_uart.c:25: include/linux/pinctrl/pinctrl.h:126: warning: 'struct pinctrl_dev' declared inside parameter list include/linux/pinctrl/pinctrl.h:126: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Barry Song Signed-off-by: Linus Walleij diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 3605e94..04c0110 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else +struct pinctrl_dev; /* Sufficiently stupid default function when pinctrl is not in use */ static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) -- cgit v0.10.2 From 8d804d4fdf90b3af62a41a20bf8b21b75529a003 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 7 Nov 2011 12:49:30 -0800 Subject: STAGING: octeon-ethernet: Fix compile error caused by skb_frag_struct change Evidently the definition of struct skb_frag_struct has changed, so we need to change to match it. Signed-off-by: David Daney To: netdev@vger.kernel.org To: gregkh@suse.de To: devel@driverdev.osuosl.org Patchwork: https://patchwork.linux-mips.org/patch/2909/ Signed-off-by: Ralf Baechle diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index b445cd6..2542c37 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -275,7 +275,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i; - hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset)); + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset)); hw_buffer.s.size = fs->size; CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64; } -- cgit v0.10.2 From 4e6c82b3614a18740ef63109d58743a359266daf Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 7 Nov 2011 08:51:24 -0600 Subject: [SCSI] fix WARNING: at drivers/scsi/scsi_lib.c:1704 On Mon, 2011-11-07 at 17:24 +1100, Stephen Rothwell wrote: > Hi all, > > Starting some time last week I am getting the following during boot on > our PPC970 blade: > > calling .ipr_init+0x0/0x68 @ 1 > ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011) > ipr 0000:01:01.0: Found IOA with IRQ: 26 > ipr 0000:01:01.0: Starting IOA initialization sequence. > ipr 0000:01:01.0: Adapter firmware version: 06160039 > ipr 0000:01:01.0: IOA initialized. > scsi0 : IBM 572E Storage Adapter > ------------[ cut here ]------------ > WARNING: at drivers/scsi/scsi_lib.c:1704 > Modules linked in: > NIP: c00000000053b3d4 LR: c00000000053e5b0 CTR: c000000000541d70 > REGS: c0000000783c2f60 TRAP: 0700 Not tainted (3.1.0-autokern1) > MSR: 8000000000029032 CR: 24002024 XER: 20000002 > TASK = c0000000783b8000[1] 'swapper' THREAD: c0000000783c0000 CPU: 0 > GPR00: 0000000000000001 c0000000783c31e0 c000000000cf38b0 c00000000239a9d0 > GPR04: c000000000cbe8f8 0000000000000000 c0000000783c3040 0000000000000000 > GPR08: c000000075daf488 c000000078a3b7ff c000000000bcacc8 0000000000000000 > GPR12: 0000000044002028 c000000007ffb000 0000000002e40000 000000000099b800 > GPR16: 0000000000000000 c000000000bba5fc c000000000a61db8 0000000000000000 > GPR20: 0000000001b77200 0000000000000000 c000000078990000 0000000000000001 > GPR24: c000000002396828 0000000000000000 0000000000000000 c000000078a3b938 > GPR28: fffffffffffffffa c0000000008ad2c0 c000000000c7faa8 c00000000239a9d0 > NIP [c00000000053b3d4] .scsi_free_queue+0x24/0x90 > LR [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > Call Trace: > [c0000000783c31e0] [c000000000c7faa8] wireless_seq_fops+0x278d0/0x2eb88 (unreliable) > [c0000000783c3270] [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > [c0000000783c3330] [c00000000053eba0] .scsi_probe_and_add_lun+0x390/0xb40 > [c0000000783c34a0] [c00000000053f7ec] .__scsi_scan_target+0x16c/0x650 > [c0000000783c35f0] [c00000000053fd90] .scsi_scan_channel+0xc0/0x100 > [c0000000783c36a0] [c00000000053fefc] .scsi_scan_host_selected+0x12c/0x1c0 > [c0000000783c3750] [c00000000083dcb4] .ipr_probe+0x2c0/0x390 > [c0000000783c3830] [c0000000003f50b4] .local_pci_probe+0x34/0x50 > [c0000000783c38a0] [c0000000003f5f78] .pci_device_probe+0x148/0x150 > [c0000000783c3950] [c0000000004e1e8c] .driver_probe_device+0xdc/0x210 > [c0000000783c39f0] [c0000000004e20cc] .__driver_attach+0x10c/0x110 > [c0000000783c3a80] [c0000000004e1228] .bus_for_each_dev+0x98/0xf0 > [c0000000783c3b30] [c0000000004e1bf8] .driver_attach+0x28/0x40 > [c0000000783c3bb0] [c0000000004e07d8] .bus_add_driver+0x218/0x340 > [c0000000783c3c60] [c0000000004e2a2c] .driver_register+0x9c/0x1b0 > [c0000000783c3d00] [c0000000003f62d4] .__pci_register_driver+0x64/0x140 > [c0000000783c3da0] [c000000000b99f88] .ipr_init+0x4c/0x68 > [c0000000783c3e20] [c00000000000ad24] .do_one_initcall+0x1a4/0x1e0 > [c0000000783c3ee0] [c000000000b512d0] .kernel_init+0x14c/0x1fc > [c0000000783c3f90] [c000000000022468] .kernel_thread+0x54/0x70 > Instruction dump: > ebe1fff8 7c0803a6 4e800020 7c0802a6 fba1ffe8 fbe1fff8 7c7f1b78 f8010010 > f821ff71 e8030398 3120ffff 7c090110 <0b000000> e86303b0 482de065 60000000 > ---[ end trace 759bed76a85e8dec ]--- > scsi 0:0:1:0: Direct-Access IBM-ESXS MAY2036RC T106 PQ: 0 ANSI: 5 > ------------[ cut here ]------------ > > I get lots more of these. The obvious commit to point the finger at > is 3308511c93e6 ("[SCSI] Make scsi_free_queue() kill pending SCSI > commands") but the root cause may be something different. Caused by commit f7c9c6bb14f3104608a3a83cadea10a6943d2804 Author: Anton Blanchard Date: Thu Nov 3 08:56:22 2011 +1100 [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev Doesn't completely do the teardown. The true fix is to do a proper teardown instead of hand rolling it Reported-by: Stephen Rothwell Tested-by: Stephen Rothwell Cc: stable@kernel.org #2.6.38+ Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 72273a0..b3c6d95 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -319,11 +319,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, return sdev; out_device_destroy: - scsi_device_set_state(sdev, SDEV_DEL); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_dev); - scsi_free_queue(sdev->request_queue); - put_device(&sdev->sdev_gendev); + __scsi_remove_device(sdev); out: if (display_failure_msg) printk(ALLOC_FAILURE_MSG, __func__); -- cgit v0.10.2 From 745718132c3c7cac98a622b610e239dcd5217f71 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 9 Nov 2011 08:39:24 +0100 Subject: [SCSI] Silencing 'killing requests for dead queue' When we tear down a device we try to flush all outstanding commands in scsi_free_queue(). However the check in scsi_request_fn() is imperfect as it only signals that we _might start_ aborting commands, not that we've actually aborted some. So move the printk inside the scsi_kill_request function, this will also give us a hint about which commands are aborted. Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 06bc2655..f85cfa6 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1409,6 +1409,8 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) blk_start_request(req); + scmd_printk(KERN_INFO, cmd, "killing request\n"); + sdev = cmd->device; starget = scsi_target(sdev); shost = sdev->host; @@ -1490,7 +1492,6 @@ static void scsi_request_fn(struct request_queue *q) struct request *req; if (!sdev) { - printk("scsi: killing requests for dead queue\n"); while ((req = blk_peek_request(q)) != NULL) scsi_kill_request(req, q); return; -- cgit v0.10.2 From f8d1ccf15568268c76f913b45ecdd33134387f1a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Nov 2011 12:28:33 +0100 Subject: mac80211: fix NULL dereference in radiotap code When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc88518916793af8ad6a02e05ff254d95c36d875 Author: Johannes Berg Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b867bd5..097b42d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -140,8 +140,9 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, pos++; /* IEEE80211_RADIOTAP_RATE */ - if (status->flag & RX_FLAG_HT) { + if (!rate || status->flag & RX_FLAG_HT) { /* + * Without rate information don't add it. If we have, * MCS information is a separate field in radiotap, * added below. The byte here is needed as padding * for the channel though, so initialise it to 0. @@ -162,12 +163,14 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, else if (status->flag & RX_FLAG_HT) put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ, pos); - else if (rate->flags & IEEE80211_RATE_ERP_G) + else if (rate && rate->flags & IEEE80211_RATE_ERP_G) put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, pos); - else + else if (rate) put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, pos); + else + put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos); pos += 2; /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */ -- cgit v0.10.2 From 5b2bbf75a24d6b06afff6de0eb4819413fd81971 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Nov 2011 13:04:41 +0100 Subject: mac80211: fix bug in ieee80211_build_probe_req ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 7439d26..0c94907 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -880,6 +880,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, skb = ieee80211_probereq_get(&local->hw, &sdata->vif, ssid, ssid_len, buf, buf_len); + if (!skb) + goto out; if (dst) { mgmt = (struct ieee80211_mgmt *) skb->data; @@ -888,6 +890,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, } IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + + out: kfree(buf); return skb; -- cgit v0.10.2 From 58ebacc66bd11be2327edcefc79de94bd6f5bb4a Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 8 Nov 2011 14:28:06 -0800 Subject: cfg80211: fix bug on regulatory core exit on access to last_request Commit 4d9d88d1 by Scott James Remnant added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[] [] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [] dev_uevent+0xc5/0x170 [] kobject_uevent_env+0x1f7/0x490 [] ? sub_preempt_count+0x29/0x60 [] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [] ? devres_release_all+0x27/0x60 [] kobject_uevent+0xb/0x10 [] device_del+0x157/0x1b0 [] platform_device_del+0x1d/0x90 [] platform_device_unregister+0x16/0x30 [] regulatory_exit+0x5d/0x180 [cfg80211] [] cfg80211_exit+0x2b/0x45 [cfg80211] [] sys_delete_module+0x16c/0x220 [] ? trace_hardirqs_on_caller+0x7e/0x120 [] system_call_fastpath+0x16/0x1b Code: RIP [] reg_device_uevent+0x1a/0x50 [cfg80211] RSP CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg Cc: Scott James Remnant Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2520a1b..bc1ec2c 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2263,6 +2263,9 @@ void /* __init_or_exit */ regulatory_exit(void) kfree(last_request); + last_request = NULL; + dev_set_uevent_suppress(®_pdev->dev, true); + platform_device_unregister(reg_pdev); spin_lock_bh(®_pending_beacons_lock); -- cgit v0.10.2 From d929bbc63069396e723a180cde9cb71adc9f76ac Mon Sep 17 00:00:00 2001 From: Steven Miao Date: Wed, 9 Nov 2011 16:30:40 +0800 Subject: wireless: libertas: fix unaligned le64 accesses use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 4fcd653..a7f1ab2 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -634,7 +634,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, if (channel && !(channel->flags & IEEE80211_CHAN_DISABLED)) cfg80211_inform_bss(wiphy, channel, - bssid, le64_to_cpu(*(__le64 *)tsfdesc), + bssid, get_unaligned_le64(tsfdesc), capa, intvl, ie, ielen, LBS_SCAN_RSSI_TO_MBM(rssi), GFP_KERNEL); -- cgit v0.10.2 From 0ecfe806f146e0cb10c2c5abbb3bb4e91959e41a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Nov 2011 12:14:16 +0100 Subject: mac80211: fix race between connection monitor & suspend When the connection monitor timer fires right before suspend, the following will happen: timer fires -> monitor_work gets queued suspend calls ieee80211_sta_quiesce ieee80211_sta_quiesce: - deletes timer - cancels monitor_work synchronously, running it [note wrong order of these steps] monitor_work runs, re-arming the timer later, timer fires while system should be quiesced This causes a warning: WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]() but is otherwise harmless. I'm not completely sure this is the scenario Thomas stumbled across, but it is the only way I can right now see the warning in a scenario like the one he reported. Reported-by: Thomas Meyer Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d3b408c..40db011 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2286,6 +2286,7 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) cancel_work_sync(&ifmgd->request_smps_work); + cancel_work_sync(&ifmgd->monitor_work); cancel_work_sync(&ifmgd->beacon_connection_loss_work); if (del_timer_sync(&ifmgd->timer)) set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); @@ -2294,7 +2295,6 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) if (del_timer_sync(&ifmgd->chswitch_timer)) set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); - cancel_work_sync(&ifmgd->monitor_work); /* these will just be re-established on connection */ del_timer_sync(&ifmgd->conn_mon_timer); del_timer_sync(&ifmgd->bcn_mon_timer); -- cgit v0.10.2 From 50ec1538fac0e39078d45ca5f8a5186621830058 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Mon, 7 Nov 2011 23:31:58 +0000 Subject: net/temac: FIX segfault when process old irqs Do not enable the irq until the scatter gather registers are ready to handle the data. Otherwise an irq from a packet send/received before last close can lead to an access to an invalid memory region on the irq handler. Also, stop the dma engine on close. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index caf3659..05a1ffa 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -203,6 +203,9 @@ static void temac_dma_bd_release(struct net_device *ndev) struct temac_local *lp = netdev_priv(ndev); int i; + /* Reset Local Link (DMA) */ + lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST); + for (i = 0; i < RX_BD_NUM; i++) { if (!lp->rx_skb[i]) break; @@ -860,6 +863,8 @@ static int temac_open(struct net_device *ndev) phy_start(lp->phy_dev); } + temac_device_reset(ndev); + rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev); if (rc) goto err_tx_irq; @@ -867,7 +872,6 @@ static int temac_open(struct net_device *ndev) if (rc) goto err_rx_irq; - temac_device_reset(ndev); return 0; err_rx_irq: -- cgit v0.10.2 From f79d7e6f6ae397caf219cef1392ca39b3ff10833 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Mon, 7 Nov 2011 23:39:57 +0000 Subject: net/ll_temac: FIX : Wait for indirect wait to end While tracing down a connectivity problem on the temac I connected a probe to the Cross bar irq, and it was triggered when doing ifdown->ifup. This is fixed once waiting for the indirect write to end. Since it is not on the hot path there is no performance loss. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 05a1ffa..2681b53 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -114,6 +114,7 @@ void temac_indirect_out32(struct temac_local *lp, int reg, u32 value) return; temac_iow(lp, XTE_LSW0_OFFSET, value); temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg); + temac_indirect_busywait(lp); } /** -- cgit v0.10.2 From fecc73519439361eab21fb3cebec504672ef0e03 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 8 Nov 2011 10:31:10 +0000 Subject: net: drivers/net/hippi/Kconfig should be sourced Commit ff5a3b509e ("hippi: Move the HIPPI driver") moved the HIPPI driver into drivers/net/hippi. It didn't source drivers/net/hippi/Kconfig though, so it didn't make all necessary Kconfig changes. So let drivers/net/kconfig source HIPPI's Kconfig file. [ Fix syntax error at the end of HIPP's Kconfig file. -DaveM ] Signed-off-by: Paul Bolle Acked-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 583f66c..654a5e9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -245,6 +245,8 @@ source "drivers/net/ethernet/Kconfig" source "drivers/net/fddi/Kconfig" +source "drivers/net/hippi/Kconfig" + config NET_SB1000 tristate "General Instruments Surfboard 1000" depends on PNP diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig index 7393eb7..95eb34f 100644 --- a/drivers/net/hippi/Kconfig +++ b/drivers/net/hippi/Kconfig @@ -36,4 +36,4 @@ config ROADRUNNER_LARGE_RINGS kernel code or by user space programs. Say Y here only if you have the memory. -endif /* HIPPI */ +endif # HIPPI -- cgit v0.10.2 From 069294e813ed5f27f82613b027609bcda5f1b914 Mon Sep 17 00:00:00 2001 From: Nick Bowler Date: Tue, 8 Nov 2011 12:12:44 +0000 Subject: ah: Correctly pass error codes in ahash output callback. The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler Signed-off-by: David S. Miller diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index c1f4154..33ca186 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -136,8 +136,6 @@ static void ah_output_done(struct crypto_async_request *base, int err) memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr)); } - err = ah->nexthdr; - kfree(AH_SKB_CB(skb)->tmp); xfrm_output_resume(skb, err); } diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index 2195ae6..ede4d9d 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -324,8 +324,6 @@ static void ah6_output_done(struct crypto_async_request *base, int err) #endif } - err = ah->nexthdr; - kfree(AH_SKB_CB(skb)->tmp); xfrm_output_resume(skb, err); } -- cgit v0.10.2 From b7ea81a58adc123a4e980cb0eff9eb5c144b5dc7 Mon Sep 17 00:00:00 2001 From: Nick Bowler Date: Tue, 8 Nov 2011 12:12:45 +0000 Subject: ah: Read nexthdr value before overwriting it in ahash input callback. The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler Signed-off-by: David S. Miller diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index 33ca186..c7056b2 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -262,12 +262,12 @@ static void ah_input_done(struct crypto_async_request *base, int err) if (err) goto out; + err = ah->nexthdr; + skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, ihl); __skb_pull(skb, ah_hlen + ihl); skb_set_transport_header(skb, -ihl); - - err = ah->nexthdr; out: kfree(AH_SKB_CB(skb)->tmp); xfrm_input_resume(skb, err); diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index ede4d9d..7a33aaa 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -464,12 +464,12 @@ static void ah6_input_done(struct crypto_async_request *base, int err) if (err) goto out; + err = ah->nexthdr; + skb->network_header += ah_hlen; memcpy(skb_network_header(skb), work_iph, hdr_len); __skb_pull(skb, ah_hlen + hdr_len); skb_set_transport_header(skb, -hdr_len); - - err = ah->nexthdr; out: kfree(AH_SKB_CB(skb)->tmp); xfrm_input_resume(skb, err); -- cgit v0.10.2 From b12f62efb8ec0b9523bdb6c2d412c07193086de9 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Tue, 8 Nov 2011 21:39:28 +0000 Subject: ipv4: fix for ip_options_rcv_srr() daddr update. When opt->srr_is_hit is set skb_rtable(skb) has been updated for 'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst holds, We need update iph->daddr either. Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c index ec93335..05d20cc 100644 --- a/net/ipv4/ip_options.c +++ b/net/ipv4/ip_options.c @@ -640,6 +640,7 @@ int ip_options_rcv_srr(struct sk_buff *skb) } if (srrptr <= srrspace) { opt->srr_is_hit = 1; + iph->daddr = nexthop; opt->is_changed = 1; } return 0; -- cgit v0.10.2 From 8658ca730fa66fd6b8c559315915c774330f35bb Mon Sep 17 00:00:00 2001 From: "Maxin B. John" Date: Wed, 9 Nov 2011 11:12:58 +0100 Subject: ARM: 7153/1: mach-bcmring: fix build error in core.c Fixes this build error: CC arch/arm/mach-bcmring/core.o arch/arm/mach-bcmring/core.c: In function 'bcmring_init_timer': arch/arm/mach-bcmring/core.c:238: error: implicit declaration of function 'sp804_clockevents_register' make[1]: *** [arch/arm/mach-bcmring/core.o] Error 1 make: *** [arch/arm/mach-bcmring] Error 2 Signed-off-by: Maxin B. John Reviewed-by: Jiandong Zheng Signed-off-by: Russell King diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 43eadbc..430da12 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -235,7 +235,7 @@ void __init bcmring_init_timer(void) */ bcmring_clocksource_init(); - sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0"); + sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0"); } struct sys_timer bcmring_timer = { -- cgit v0.10.2 From 5fc86281b9eba5eb9cfab999bcb00deb335da762 Mon Sep 17 00:00:00 2001 From: "Maxin B. John" Date: Wed, 9 Nov 2011 11:27:36 +0100 Subject: ARM: 7154/1: mach-bcmring: fix build error in dma.c Fixes this build error: CC arch/arm/mach-bcmring/dma.o arch/arm/mach-bcmring/dma.c: In function 'dma_request_channel_dbg': arch/arm/mach-bcmring/dma.c:1022: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) arch/arm/mach-bcmring/dma.c:1022: error: (Each undeclared identifier is reported only once arch/arm/mach-bcmring/dma.c:1022: error: for each function it appears in.) arch/arm/mach-bcmring/dma.c:1024: error: implicit declaration of function 'schedule' arch/arm/mach-bcmring/dma.c:1027: error: implicit declaration of function 'signal_pending' arch/arm/mach-bcmring/dma.c: In function 'dma_free_channel': arch/arm/mach-bcmring/dma.c:1092: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) arch/arm/mach-bcmring/dma.c: In function 'dma_map_add_region': arch/arm/mach-bcmring/dma.c:1946: error: dereferencing pointer to incomplete type arch/arm/mach-bcmring/dma.c:1948: error: dereferencing pointer to incomplete type arch/arm/mach-bcmring/dma.c:1955: error: dereferencing pointer to incomplete type make[1]: *** [arch/arm/mach-bcmring/dma.o] Error 1 make: *** [arch/arm/mach-bcmring] Error 2 Signed-off-by: Maxin B. John Reviewed-by: Jiandong Zheng Signed-off-by: Russell King diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index b52b8de..f4d4d6d 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -36,6 +36,7 @@ #include #include #include +#include #include /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -- cgit v0.10.2 From 1a1f2be2a4d7f6f538169dca534c94b221b21923 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Nov 2011 19:13:43 +0100 Subject: ARM: 7155/1: arch.h: Declare 'pt_regs' locally Fix the following warning when building imx_v4_v5_defconfig target: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/mach-imx/mach-imx27ipcam.c:18: /home/fabio/linus/linux-2.6/arch/arm/include/asm/mach/arch.h:47: warning: 'struct pt_regs' declared inside parameter list /home/fabio/linus/linux-2.6/arch/arm/include/asm/mach/arch.h:47: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-imx/mach-imx27ipcam.c:78: warning: initialization from incompatible pointer type Declare 'struct pt_regs' locally. Cc: Eric Miao Signed-off-by: Fabio Estevam Signed-off-by: Russell King diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 7d19425..2b0efc3 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -13,6 +13,7 @@ struct tag; struct meminfo; struct sys_timer; +struct pt_regs; struct machine_desc { unsigned int nr; /* architecture number */ -- cgit v0.10.2 From 5bb01a991897d74295ff8de548d350400d7370a9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Nov 2011 15:29:31 -0800 Subject: ARM: OMAP: Fix map_io for Amstrad E3 Commit 7b88e62f5d219a86d81bdf4388012c97dc42e8f8 (ARM: OMAP1: Use generic map_io, init_early and init_irq) changed omap1 to use generic map_io. Looks like I missed one board though. Fix this by adding a custom map_io for Amstrad E3. Reported-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 51bae31..b0f15d2 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -302,8 +302,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); - omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); @@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); +static void __init ams_delta_map_io(void) +{ + omap15xx_map_io(); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); +} + MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell */ .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = ams_delta_map_io, .init_early = omap1_init_early, .reserve = omap_reserve, .init_irq = omap1_init_irq, -- cgit v0.10.2 From be2658ffe1d2a4ab4e045b22a317459595abc2c4 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 10 Nov 2011 00:43:52 +0100 Subject: PM / shmobile: Don't skip debugging output in pd_power_up() Don't skip debugging output upon earlier loop termination in pd_power_up(). Signed-off-by: Guennadi Liakhovetski Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 7961273..e261383 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd) for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { if (!(__raw_readl(SWUCR) & mask)) - goto out; + break; if (retry_count > PSTR_RETRIES) udelay(PSTR_DELAY_US); else cpu_relax(); } - if (__raw_readl(SWUCR) & mask) + if (!retry_count) ret = -EIO; if (!sh7372_pd->no_debug) -- cgit v0.10.2 From 056879d2f244001b2888cdc8cf868c33ca8b23a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 10 Nov 2011 00:44:01 +0100 Subject: ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix If "no_suspend_irq" is used on the sh7372 Mackerel board with v3.2-rc1 then Suspend-to-RAM fails because the serial console tries to write to the SCIF driver even though the power domain is turned off. This patch checks the state of "console_suspend_enabled" to see if A3SP should be forced enabled. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index e261383..78c98a8 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -469,6 +470,11 @@ void __init sh7372_pm_init(void) /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ __raw_writel(0, PDNSEL); + /* serial consoles make use of SCIF hardware located in A3SP, + * keep such power domain on if "no_console_suspend" is set. + */ + sh7372_a3sp.stay_on = !console_suspend_enabled; + sh7372_suspend_init(); sh7372_cpuidle_init(); } -- cgit v0.10.2 From 24050956e029a9ecff096e1992869ada4492963c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 10 Nov 2011 00:44:10 +0100 Subject: PM / Clocks: Only disable enabled clocks in pm_clk_suspend() Refrain from running clk_disable() on clocks that have not been enabled. A typical case when this can happen is during Suspend-to-RAM for devices that have no driver associated with them. In such case the clock may be in default ACQUIRED state. Without this patch the sh7372 Mackerel board crashes in __clk_disable() during Suspend-to-RAM with: "Trying to disable clock 0xdeadbeef with 0 usecount" This happens for the CEU device which is added during boot. The test case has no CEU driver included in the kernel configuration. Needed for v3.2-rc1. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 5f0f85d..428e55e 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -229,7 +229,8 @@ int pm_clk_suspend(struct device *dev) list_for_each_entry_reverse(ce, &psd->clock_list, node) { if (ce->status < PCE_STATUS_ERROR) { - clk_disable(ce->clk); + if (ce->status == PCE_STATUS_ENABLED) + clk_disable(ce->clk); ce->status = PCE_STATUS_ACQUIRED; } } -- cgit v0.10.2 From af4c720efc0507e01b89774fed936087baac4107 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 10 Nov 2011 00:44:18 +0100 Subject: PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request() Make dev_pm_qos_add_request() use WARN() in a better way and do not hardcode the function's name into the message (use __func__ instead). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 30a94ea..86de6c5 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -212,11 +212,9 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, if (!dev || !req) /*guard against callers passing in null */ return -EINVAL; - if (dev_pm_qos_request_active(req)) { - WARN(1, KERN_ERR "dev_pm_qos_add_request() called for already " - "added request\n"); + if (WARN(dev_pm_qos_request_active(req), + "%s() called for already added request\n", __func__)) return -EINVAL; - } req->dev = dev; @@ -271,11 +269,9 @@ int dev_pm_qos_update_request(struct dev_pm_qos_request *req, if (!req) /*guard against callers passing in null */ return -EINVAL; - if (!dev_pm_qos_request_active(req)) { - WARN(1, KERN_ERR "dev_pm_qos_update_request() called for " - "unknown object\n"); + if (WARN(!dev_pm_qos_request_active(req), + "%s() called for unknown object\n", __func__)) return -EINVAL; - } mutex_lock(&dev_pm_qos_mtx); @@ -312,11 +308,9 @@ int dev_pm_qos_remove_request(struct dev_pm_qos_request *req) if (!req) /*guard against callers passing in null */ return -EINVAL; - if (!dev_pm_qos_request_active(req)) { - WARN(1, KERN_ERR "dev_pm_qos_remove_request() called for " - "unknown object\n"); + if (WARN(!dev_pm_qos_request_active(req), + "%s() called for unknown object\n", __func__)) return -EINVAL; - } mutex_lock(&dev_pm_qos_mtx); -- cgit v0.10.2 From 1e49570171117e547e6324c58371db4a0dc2f1db Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 9 Nov 2011 00:14:11 -0500 Subject: net: Fix references to deleted NET_ETHERNET Kconfig setting. Change them over to plain "ETHERNET" Reported-by: Paul Bolle Signed-off-by: David S. Miller Acked-by: Jeff Kirsher diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 32d9086..5f2cdb3 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -3,7 +3,7 @@ if ETRAX_ARCH_V10 config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 - select NET_ETHERNET + select ETHERNET select NET_CORE select MII help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index e47e9c3..de43aad 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -3,7 +3,7 @@ if ETRAX_ARCH_V32 config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V32 - select NET_ETHERNET + select ETHERNET select NET_CORE select MII help diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index fa80ba1..9b66d2d 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -4,7 +4,7 @@ menu "S/390 network device drivers" config LCS def_tristate m prompt "Lan Channel Station Interface" - depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI) + depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI) help Select this option if you want to use LCS networking on IBM System z. This device driver supports Token Ring (IEEE 802.5), diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index c28713d..863fc21 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -50,7 +50,7 @@ #include "lcs.h" -#if !defined(CONFIG_NET_ETHERNET) && \ +#if !defined(CONFIG_ETHERNET) && \ !defined(CONFIG_TR) && !defined(CONFIG_FDDI) #error Cannot compile lcs.c without some net devices switched on. #endif @@ -1634,7 +1634,7 @@ lcs_startlan_auto(struct lcs_card *card) int rc; LCS_DBF_TEXT(2, trace, "strtauto"); -#ifdef CONFIG_NET_ETHERNET +#ifdef CONFIG_ETHERNET card->lan_type = LCS_FRAME_TYPE_ENET; rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP); if (rc == 0) @@ -2166,7 +2166,7 @@ lcs_new_device(struct ccwgroup_device *ccwgdev) goto netdev_out; } switch (card->lan_type) { -#ifdef CONFIG_NET_ETHERNET +#ifdef CONFIG_ETHERNET case LCS_FRAME_TYPE_ENET: card->lan_type_trans = eth_type_trans; dev = alloc_etherdev(0); -- cgit v0.10.2 From 3940d6185a982a970ff562e085caccbdd62f40bb Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 8 Nov 2011 22:13:14 -0800 Subject: Input: elantech - adjust hw_version detection logic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes some v3 hardware (fw_version: 0x150500) wrongly detected as v2 hardware. Reported-by: Marc Dietrich Signed-off-by: JJ Ding Tested-By: Marc Dietrich Acked-by: Éric Piel Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 09b93b1..e2a9867 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1210,18 +1210,28 @@ static int elantech_reconnect(struct psmouse *psmouse) */ static int elantech_set_properties(struct elantech_data *etd) { + /* This represents the version of IC body. */ int ver = (etd->fw_version & 0x0f0000) >> 16; + /* Early version of Elan touchpads doesn't obey the rule. */ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) etd->hw_version = 1; - else if (etd->fw_version < 0x150600) - etd->hw_version = 2; - else if (ver == 5) - etd->hw_version = 3; - else if (ver == 6) - etd->hw_version = 4; - else - return -1; + else { + switch (ver) { + case 2: + case 4: + etd->hw_version = 2; + break; + case 5: + etd->hw_version = 3; + break; + case 6: + etd->hw_version = 4; + break; + default: + return -1; + } + } /* * Turn on packet checking by default. -- cgit v0.10.2 From 77f6ca5a6283a5d34c4bd9dc809fec9e37fdd80d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 9 Nov 2011 10:13:33 -0800 Subject: Input: ams_delta_serio - include linux/module.h Fix the following compilation failure with v3.2-rc1 by including module.h: CC drivers/input/serio/ams_delta_serio.o drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init': drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function) drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Aaro Koskinen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 4b2a42f..d4d08bd 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From c0a39151a4055332897cba615623d3de2f3896df Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 10 Nov 2011 07:13:07 +0800 Subject: ARM: pxa: fix inconsistent CONFIG_USB_PXA27X Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs to keep consistent. Cc: stable@kernel.org Signed-off-by: Haojian Zhuang Acked-by: Felipe Balbi Signed-off-by: Eric Miao diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 227a477..d95763d 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -287,7 +287,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 176ec22..fd996bb 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -263,7 +263,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a88e64d..443675d 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -132,7 +132,7 @@ CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 59577ad..547a3c1 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index fc0b854..4b81f59 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static void balloon3_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 692e1ff..d23b92b 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void) static inline void __init colibri_pxa320_init_eth(void) {} #endif /* CONFIG_AX88796 */ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), .gpio_pullup = -1, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 9c8208c..ffdd70d 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_GADGET_PXA25X +#ifdef CONFIG_USB_PXA25X static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index f80bbe2..d4eac3d 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power, #define palm27x_lcd_init(power, mode) do {} while (0) #endif -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) extern void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted); #else diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 325c245..fbc10d7 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info palm27x_udc_info = { .gpio_vbus_inverted = 1, }; diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ec7cae..2c24c67 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {} /****************************************************************************** * UDC ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE) +#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) static struct gpio_vbus_mach_info palmtc_udc_info = { .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, .gpio_vbus_inverted = 1, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index a7539a6..ca0c661 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, .gpio_pullup = -1, -- cgit v0.10.2 From 45f034ef205e5439a50d6f7e5f89add93131c0cc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 5 Nov 2011 21:28:46 +0100 Subject: pinctrl: hide subsystem from the populace Machines that have embedded pin controllers need to select them explicitly, so why broadcast their config options to menuconfig. We provide a helpful submenu for those machines that do select it, making it possible to enable debugging for example. Reported-by: Linus Torvalds Acked-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index ef56644..e17e2f8 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -2,23 +2,17 @@ # PINCTRL infrastructure and drivers # -menuconfig PINCTRL - bool "PINCTRL Support" +config PINCTRL + bool depends on EXPERIMENTAL - help - This enables the PINCTRL subsystem for controlling pins - on chip packages, for example multiplexing pins on primarily - PGA and BGA packages for systems on chip. - - If unsure, say N. if PINCTRL +menu "Pin controllers" + depends on PINCTRL + config PINMUX bool "Support pinmux controllers" - help - Say Y here if you want the pincontrol subsystem to handle pin - multiplexing drivers. config DEBUG_PINCTRL bool "Debug PINCTRL calls" @@ -30,14 +24,12 @@ config PINMUX_SIRF bool "CSR SiRFprimaII pinmux driver" depends on ARCH_PRIMA2 select PINMUX - help - Say Y here to enable the SiRFprimaII pinmux driver config PINMUX_U300 bool "U300 pinmux driver" depends on ARCH_U300 select PINMUX - help - Say Y here to enable the U300 pinmux driver + +endmenu endif -- cgit v0.10.2 From d0985394e7fee6b25a7cc8335d45bc1c1a8ab2d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Nov 2011 09:03:55 +0100 Subject: block: Revert "[SCSI] genhd: add a new attribute "alias" in gendisk" This reverts commit a72c5e5eb738033938ab30d6a634b74d1d060f10. The commit introduced alias for block devices which is intended to be used during logging although actual usage hasn't been committed yet. This approach adds very limited benefit (raw log might be easier to follow) which can be trivially implemented in userland but has a lot of problems. It is much worse than netif renames because it doesn't rename the actual device but just adds conveninence name which isn't used universally or enforced. Everything internal including device lookup and sysfs still uses the internal name and nothing prevents two devices from using conflicting alias - ie. sda can have sdb as its alias. This has been nacked by people working on device driver core, block layer and kernel-userland interface and shouldn't have been upstreamed. Revert it. http://thread.gmane.org/gmane.linux.kernel/1155104 http://thread.gmane.org/gmane.linux.scsi/68632 http://thread.gmane.org/gmane.linux.scsi/69776 Signed-off-by: Tejun Heo Acked-by: Greg Kroah-Hartman Acked-by: Kay Sievers Cc: "James E.J. Bottomley" Cc: Nao Nishijima Cc: Alan Cox Cc: Al Viro Signed-off-by: Jens Axboe diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 2b5d561..c1eb41c 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -206,16 +206,3 @@ Description: when a discarded area is read the discard_zeroes_data parameter will be set to one. Otherwise it will be 0 and the result of reading a discarded area is undefined. -What: /sys/block//alias -Date: Aug 2011 -Contact: Nao Nishijima -Description: - A raw device name of a disk does not always point a same disk - each boot-up time. Therefore, users have to use persistent - device names, which udev creates when the kernel finds a disk, - instead of raw device name. However, kernel doesn't show those - persistent names on its messages (e.g. dmesg). - This file can store an alias of the disk and it would be - appeared in kernel messages if it is set. A disk can have an - alias which length is up to 255bytes. Users can use alphabets, - numbers, "-" and "_" in alias name. This file is writeonce. diff --git a/block/genhd.c b/block/genhd.c index 9253839..02e9fca 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -19,7 +19,6 @@ #include #include #include -#include #include "blk.h" @@ -916,74 +915,6 @@ static int __init genhd_device_init(void) subsys_initcall(genhd_device_init); -static ssize_t alias_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct gendisk *disk = dev_to_disk(dev); - ssize_t ret = 0; - - if (disk->alias) - ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias); - return ret; -} - -static ssize_t alias_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct gendisk *disk = dev_to_disk(dev); - char *alias; - char *envp[] = { NULL, NULL }; - unsigned char c; - int i; - ssize_t ret = count; - - if (!count) - return -EINVAL; - - if (count >= ALIAS_LEN) { - printk(KERN_ERR "alias: alias is too long\n"); - return -EINVAL; - } - - /* Validation check */ - for (i = 0; i < count; i++) { - c = buf[i]; - if (i == count - 1 && c == '\n') - break; - if (!isalnum(c) && c != '_' && c != '-') { - printk(KERN_ERR "alias: invalid alias\n"); - return -EINVAL; - } - } - - if (disk->alias) { - printk(KERN_INFO "alias: %s is already assigned (%s)\n", - disk->disk_name, disk->alias); - return -EINVAL; - } - - alias = kasprintf(GFP_KERNEL, "%s", buf); - if (!alias) - return -ENOMEM; - - if (alias[count - 1] == '\n') - alias[count - 1] = '\0'; - - envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias); - if (!envp[0]) { - kfree(alias); - return -ENOMEM; - } - - disk->alias = alias; - printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name); - - kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp); - - kfree(envp[0]); - return ret; -} - static ssize_t disk_range_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1043,7 +974,6 @@ static ssize_t disk_discard_alignment_show(struct device *dev, return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue)); } -static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store); static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL); static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL); static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL); @@ -1066,7 +996,6 @@ static struct device_attribute dev_attr_fail_timeout = #endif static struct attribute *disk_attrs[] = { - &dev_attr_alias.attr, &dev_attr_range.attr, &dev_attr_ext_range.attr, &dev_attr_removable.attr, diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 9de31bc..6d18f35 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -21,8 +21,6 @@ #define dev_to_part(device) container_of((device), struct hd_struct, __dev) #define disk_to_dev(disk) (&(disk)->part0.__dev) #define part_to_dev(part) (&((part)->__dev)) -#define alias_name(disk) ((disk)->alias ? (disk)->alias : \ - (disk)->disk_name) extern struct device_type part_type; extern struct kobject *block_depr; @@ -60,7 +58,6 @@ enum { #define DISK_MAX_PARTS 256 #define DISK_NAME_LEN 32 -#define ALIAS_LEN 256 #include #include @@ -166,7 +163,6 @@ struct gendisk { * disks that can't be partitioned. */ char disk_name[DISK_NAME_LEN]; /* name of major driver */ - char *alias; /* alias name of disk */ char *(*devnode)(struct gendisk *gd, mode_t *mode); unsigned int events; /* supported events */ -- cgit v0.10.2 From 952f6d1386b21c5e8db346b805380bf2432e5e9b Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Thu, 10 Nov 2011 10:16:23 +0100 Subject: PM / devfreq: Remove compiler error after irq.h update Added and to avoid a compiler error because linux/irq.h no longer includes linux/module.h after Linux 3.2. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Rafael J. Wysocki diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 5d15b81..d065925 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -15,7 +15,9 @@ #include #include #include +#include #include +#include #include #include #include -- cgit v0.10.2 From 98d97019c88bd832da1457729739cf739ece493f Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 10 Nov 2011 17:19:07 +0530 Subject: MAINTAINERS: Drop inactive Samsung ASoC maintainer Signed-off-by: Jassi Brar Signed-off-by: Mark Brown diff --git a/MAINTAINERS b/MAINTAINERS index c802e5f..fd7e441 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5648,7 +5648,6 @@ F: drivers/media/video/*7146* F: include/media/*7146* SAMSUNG AUDIO (ASoC) DRIVERS -M: Jassi Brar M: Sangbeom Kim L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported -- cgit v0.10.2 From cf8ff6b6ab0e99dd3058852f4ec76a6140abadec Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 10 Nov 2011 13:42:02 +0000 Subject: x86/platform: Add a wallclock_init func to x86_platforms ops Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called. Signed-off-by: Feng Tang Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Dirk Brandewie Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index d3d8590..f864fbe 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -152,6 +152,7 @@ struct x86_cpuinit_ops { /** * struct x86_platform_ops - platform specific runtime functions * @calibrate_tsc: calibrate TSC + * @wallclock_init: init the wallclock device * @get_wallclock: get time from HW clock like RTC etc. * @set_wallclock: set time back to HW clock * @is_untracked_pat_range exclude from PAT logic @@ -160,6 +161,7 @@ struct x86_cpuinit_ops { */ struct x86_platform_ops { unsigned long (*calibrate_tsc)(void); + void (*wallclock_init)(void); unsigned long (*get_wallclock)(void); int (*set_wallclock)(unsigned long nowtime); void (*iommu_shutdown)(void); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index afaf384..cf0ef98 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1045,6 +1045,8 @@ void __init setup_arch(char **cmdline_p) x86_init.timers.wallclock_init(); + x86_platform.wallclock_init(); + mcheck_init(); arch_init_ideal_nops(); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 6f164bd..701c7be 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -27,6 +27,7 @@ void __init x86_init_uint_noop(unsigned int unused) { } void __init x86_init_pgd_noop(pgd_t *unused) { } int __init iommu_init_noop(void) { return 0; } void iommu_shutdown_noop(void) { } +void wallclock_init_noop(void) { } /* * The platform setup functions are preset with the default functions @@ -97,6 +98,7 @@ static int default_i8042_detect(void) { return 1; }; struct x86_platform_ops x86_platform = { .calibrate_tsc = native_calibrate_tsc, + .wallclock_init = wallclock_init_noop, .get_wallclock = mach_get_cmos_time, .set_wallclock = mach_set_rtc_mmss, .iommu_shutdown = iommu_shutdown_noop, -- cgit v0.10.2 From bb84ac2d3a603f8f6c7cc553a260e8ceaf871df2 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Thu, 10 Nov 2011 13:42:21 +0000 Subject: x86/apic: Do not clear nr_irqs_gsi if no legacy irqs nr_legacy_irqs is set in probe_nr_irqs_gsi, we should not clear it after that. Otherwise, the result is that MSI irqs will be allocated from the wrong range for the systems without legacy PIC. Signed-off-by: Jacob Pan Signed-off-by: Dirk Brandewie Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3c31fa9..841b8da 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -193,10 +193,8 @@ int __init arch_early_irq_init(void) struct irq_cfg *cfg; int count, node, i; - if (!legacy_pic->nr_legacy_irqs) { - nr_irqs_gsi = 0; + if (!legacy_pic->nr_legacy_irqs) io_apic_irqs = ~0UL; - } for (i = 0; i < nr_ioapics; i++) { ioapics[i].saved_registers = -- cgit v0.10.2 From 1ade93efd0a3dda5b0c0afda8ab8f4bd12938c1b Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Thu, 10 Nov 2011 13:42:40 +0000 Subject: x86/apic: Allow use of lapic timer early calibration result lapic timer calibration can be combined with tsc in platform specific calibration functions. if such calibration result is obtained early, we can skip the redundant calibration loops. Signed-off-by: Jacob Pan Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Dirk Brandewie Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 9b7273c..1a6c09a 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -49,6 +49,7 @@ extern unsigned int apic_verbosity; extern int local_apic_timer_c2_ok; extern int disable_apic; +extern unsigned int lapic_timer_frequency; #ifdef CONFIG_SMP extern void __inquire_remote_apic(int apicid); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index a2fd72e..f98d84c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -186,7 +186,7 @@ static struct resource lapic_resource = { .flags = IORESOURCE_MEM | IORESOURCE_BUSY, }; -static unsigned int calibration_result; +unsigned int lapic_timer_frequency = 0; static void apic_pm_activate(void); @@ -454,7 +454,7 @@ static void lapic_timer_setup(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: case CLOCK_EVT_MODE_ONESHOT: - __setup_APIC_LVTT(calibration_result, + __setup_APIC_LVTT(lapic_timer_frequency, mode != CLOCK_EVT_MODE_PERIODIC, 1); break; case CLOCK_EVT_MODE_UNUSED: @@ -638,6 +638,25 @@ static int __init calibrate_APIC_clock(void) long delta, deltatsc; int pm_referenced = 0; + /** + * check if lapic timer has already been calibrated by platform + * specific routine, such as tsc calibration code. if so, we just fill + * in the clockevent structure and return. + */ + + if (lapic_timer_frequency) { + apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n", + lapic_timer_frequency); + lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR, + TICK_NSEC, lapic_clockevent.shift); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + return 0; + } + local_irq_disable(); /* Replace the global interrupt handler */ @@ -679,12 +698,12 @@ static int __init calibrate_APIC_clock(void) lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; + lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult); apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", - calibration_result); + lapic_timer_frequency); if (cpu_has_tsc) { apic_printk(APIC_VERBOSE, "..... CPU clock speed is " @@ -695,13 +714,13 @@ static int __init calibrate_APIC_clock(void) apic_printk(APIC_VERBOSE, "..... host bus clock speed is " "%u.%04u MHz.\n", - calibration_result / (1000000 / HZ), - calibration_result % (1000000 / HZ)); + lapic_timer_frequency / (1000000 / HZ), + lapic_timer_frequency % (1000000 / HZ)); /* * Do a sanity check on the APIC calibration result */ - if (calibration_result < (1000000 / HZ)) { + if (lapic_timer_frequency < (1000000 / HZ)) { local_irq_enable(); pr_warning("APIC frequency too slow, disabling apic timer\n"); return -1; -- cgit v0.10.2 From 0a9153261d54c432bc0bdc88607f24c835ac729c Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 10 Nov 2011 13:42:53 +0000 Subject: x86/mrst: Add support for Penwell clock calibration Signed-off-by: Dirk Brandewie Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 719f00b..e628312 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -44,6 +44,13 @@ enum mrst_timer_options { extern enum mrst_timer_options mrst_timer_options; +/* + * Penwell uses spread spectrum clock, so the freq number is not exactly + * the same as reported by MSR based on SDM. + */ +#define PENWELL_FSB_FREQ_83SKU 83200 +#define PENWELL_FSB_FREQ_100SKU 99840 + #define SFI_MTMR_MAX_NUM 8 #define SFI_MRTC_MAX 8 diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 6ed7afd..b7f14e5 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -187,11 +187,34 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) static unsigned long __init mrst_calibrate_tsc(void) { unsigned long flags, fast_calibrate; - - local_irq_save(flags); - fast_calibrate = apbt_quick_calibrate(); - local_irq_restore(flags); - + if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) { + u32 lo, hi, ratio, fsb; + + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi); + ratio = (hi >> 8) & 0x1f; + pr_debug("ratio is %d\n", ratio); + if (!ratio) { + pr_err("read a zero ratio, should be incorrect!\n"); + pr_err("force tsc ratio to 16 ...\n"); + ratio = 16; + } + rdmsr(MSR_FSB_FREQ, lo, hi); + if ((lo & 0x7) == 0x7) + fsb = PENWELL_FSB_FREQ_83SKU; + else + fsb = PENWELL_FSB_FREQ_100SKU; + fast_calibrate = ratio * fsb; + pr_debug("read penwell tsc %lu khz\n", fast_calibrate); + lapic_timer_frequency = fsb * 1000 / HZ; + /* mark tsc clocksource as reliable */ + set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); + } else { + local_irq_save(flags); + fast_calibrate = apbt_quick_calibrate(); + local_irq_restore(flags); + } + if (fast_calibrate) return fast_calibrate; -- cgit v0.10.2 From 064a59b6dd1f341cc478c212bb436e3da9cb8d04 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Thu, 10 Nov 2011 13:43:05 +0000 Subject: x86/mrst: Avoid reporting wrong nmi status Moorestown/Medfield platform does not have port 0x61 to report NMI status, nor does it have external NMI sources. The only NMI sources are from lapic, as results of perf counter overflow or IPI, e.g. NMI watchdog or spin lock debug. Reading port 0x61 on Moorestown will return 0xff which misled NMI handlers to false critical errors such memory parity error. The subsequent ioport access for NMI handling can also cause undefined behavior on Moorestown. This patch allows kernel process NMI due to watchdog or backrace dump without unnecessary hangs. Signed-off-by: Jacob Pan Signed-off-by: Ingo Molnar [hand applied] Signed-off-by: Alan Cox diff --git a/arch/x86/include/asm/mach_traps.h b/arch/x86/include/asm/mach_traps.h index 72a8b52..a01e7ec7 100644 --- a/arch/x86/include/asm/mach_traps.h +++ b/arch/x86/include/asm/mach_traps.h @@ -17,7 +17,7 @@ #define NMI_REASON_CLEAR_IOCHK 0x08 #define NMI_REASON_CLEAR_MASK 0x0f -static inline unsigned char get_nmi_reason(void) +static inline unsigned char default_get_nmi_reason(void) { return inb(NMI_REASON_PORT); } diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index f864fbe..1971e65 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -167,6 +167,7 @@ struct x86_platform_ops { void (*iommu_shutdown)(void); bool (*is_untracked_pat_range)(u64 start, u64 end); void (*nmi_init)(void); + unsigned char (*get_nmi_reason)(void); int (*i8042_detect)(void); }; diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index b9c8628..27d1e7c 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -348,7 +348,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) /* Non-CPU-specific NMI: NMI sources can be processed on any CPU */ raw_spin_lock(&nmi_reason_lock); - reason = get_nmi_reason(); + reason = x86_platform.get_nmi_reason(); if (reason & NMI_REASON_MASK) { if (reason & NMI_REASON_SERR) diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 701c7be..c1d6cd5 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -21,6 +21,7 @@ #include #include #include +#include void __cpuinit x86_init_noop(void) { } void __init x86_init_uint_noop(unsigned int unused) { } @@ -104,6 +105,7 @@ struct x86_platform_ops x86_platform = { .iommu_shutdown = iommu_shutdown_noop, .is_untracked_pat_range = is_ISA_range, .nmi_init = default_nmi_init, + .get_nmi_reason = default_get_nmi_reason, .i8042_detect = default_i8042_detect }; diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index b7f14e5..9b9ee29 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -277,6 +277,17 @@ static void mrst_reboot(void) } /* + * Moorestown does not have external NMI source nor port 0x61 to report + * NMI status. The possible NMI sources are from pmu as a result of NMI + * watchdog or lock debug. Reading io port 0x61 results in 0xff which + * misled NMI handler. + */ +static unsigned char mrst_get_nmi_reason(void) +{ + return 0; +} + +/* * Moorestown specific x86_init function overrides and early setup * calls. */ @@ -297,6 +308,8 @@ void __init x86_mrst_early_setup(void) x86_platform.calibrate_tsc = mrst_calibrate_tsc; x86_platform.i8042_detect = mrst_i8042_detect; x86_init.timers.wallclock_init = mrst_rtc_init; + x86_platform.get_nmi_reason = mrst_get_nmi_reason; + x86_init.pci.init = pci_mrst_init; x86_init.pci.fixup_irqs = x86_init_noop; -- cgit v0.10.2 From 181a9d795ab763b03b15f73402691abde98d1803 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:25:01 +0300 Subject: [SCSI] mpt2sas: add missing allocation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There was supposed to be a kzalloc() here and the compiler complained about it. mpt2sas_scsih.c: In function ‘mpt2sas_scsih_reset_handler’: mpt2sas_scsih.c:2807:21: warning: ‘fw_event’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Dan Carpenter Acked-by: "Nandigama, Nagalakshmi" Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 8889b1b..4e041f6 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2802,6 +2802,11 @@ _scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc) if (ioc->is_driver_loading) return; + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES; fw_event->ioc = ioc; _scsih_fw_event_add(ioc, fw_event); -- cgit v0.10.2 From 4415e63b13c68c2f56d16d400a1ae345f68cf655 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 9 Nov 2011 09:57:50 -0800 Subject: drm/i915: Module parameters using '-1' as default must be signed type Testing i915_panel_use_ssc for the default value was broken, so the driver would never autodetect the correct value. Signed-off-by: Keith Packard Reviewed-by: Michel Alexandre Salim Tested-by: Michel Alexandre Salim Cc: stable@kernel.org diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 548e04b..13488be 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -67,7 +67,7 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, "Enable power-saving render C-state 6 (default: true)"); -unsigned int i915_enable_fbc __read_mostly = -1; +int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); MODULE_PARM_DESC(i915_enable_fbc, "Enable frame buffer compression for power savings " @@ -79,7 +79,7 @@ MODULE_PARM_DESC(lvds_downclock, "Use panel (LVDS/eDP) downclocking for power savings " "(default: false)"); -unsigned int i915_panel_use_ssc __read_mostly = -1; +int i915_panel_use_ssc __read_mostly = -1; module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); MODULE_PARM_DESC(lvds_use_ssc, "Use Spread Spectrum Clock with panels [LVDS/eDP] " diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d2da91f..4a9c1b9 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1000,10 +1000,10 @@ extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; -extern unsigned int i915_panel_use_ssc __read_mostly; +extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; extern unsigned int i915_enable_rc6 __read_mostly; -extern unsigned int i915_enable_fbc __read_mostly; +extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); -- cgit v0.10.2 From 6fd36ba02132c61f67ebefff77fe710bd38ba95a Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 10 Nov 2011 13:45:24 +0000 Subject: x86, ioapic: Only print ioapic debug information for IRQs belonging to an ioapic chip with "apic=verbose" the print_IO_APIC() function tries to print IRQ to pin mappings for every active irq. It assumes chip_data is of type irq_cfg and may cause an oops if not. As the print_IO_APIC() is called from a late_initcall other chained irq chips may already be registered with custom chip_data information, causing an oops. This is the case with intel MID SoC devices with gpio demuxers registered as irq_chips. Signed-off-by: Mathias Nyman Signed-off-by: Alan Cox [ -v2: fixed build failure ] Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 841b8da..6d939d7 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1694,6 +1694,7 @@ __apicdebuginit(void) print_IO_APICs(void) int ioapic_idx; struct irq_cfg *cfg; unsigned int irq; + struct irq_chip *chip; printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) @@ -1714,6 +1715,10 @@ __apicdebuginit(void) print_IO_APICs(void) for_each_active_irq(irq) { struct irq_pin_list *entry; + chip = irq_get_chip(irq); + if (chip != &ioapic_chip) + continue; + cfg = irq_get_chip_data(irq); if (!cfg) continue; diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 27d1e7c..e88f37b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -29,6 +29,7 @@ #include #include #include +#include #define NMI_MAX_NAMELEN 16 struct nmiaction { -- cgit v0.10.2 From 54b2edf487d497cc522bce91b3bd79538f001d13 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 10 Nov 2011 17:59:45 +0000 Subject: MIPS: errloongson2_clock: Fix build error by including linux/module.h Fix the following compilation failure with v3.2-rc1 by including module.h: CC [M] arch/mips/kernel/cpufreq/loongson2_clock.o arch/mips/kernel/cpufreq/loongson2_clock.c:39:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:39:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:39:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:51:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:51:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:51:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:71:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:71:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:71:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:76:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:76:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:76:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:82:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:82:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:82:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:87:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:87:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:87:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:93:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:93:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:93:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:131:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:131:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:131:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:147:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:147:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:147:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:166:1: error: data definition has no type or storage class [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:166:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Werror=implicit-int] arch/mips/kernel/cpufreq/loongson2_clock.c:166:1: error: parameter names (without types) in function declaration [-Werror] arch/mips/kernel/cpufreq/loongson2_clock.c:168:15: error: expected declaration specifiers or '...' before string constant arch/mips/kernel/cpufreq/loongson2_clock.c:169:20: error: expected declaration specifiers or '...' before string constant arch/mips/kernel/cpufreq/loongson2_clock.c:170:16: error: expected declaration specifiers or '...' before string constant Signed-off-by: Aaro Koskinen To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2922/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c index cefc6e2..5426779 100644 --- a/arch/mips/kernel/cpufreq/loongson2_clock.c +++ b/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -7,6 +7,7 @@ * for more details. */ +#include #include #include -- cgit v0.10.2 From b2f909419b72cf043814bf17b96c93d4695378a1 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 10 Nov 2011 17:59:45 +0000 Subject: MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c The parse_mtd_partitions() and mtd_device_register() functions were combined into mtd_device_parse_register(). So call that instead. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2923/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index 975c203..0a430e0 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -17,8 +17,6 @@ static struct map_info flash_map; static struct mtd_info *mymtd; -static int nr_parts; -static struct mtd_partition *parts; static const char *part_probe_types[] = { "cmdlinepart", #ifdef CONFIG_MTD_REDBOOT_PARTS @@ -61,11 +59,8 @@ static int __init flash_init(void) mymtd = do_map_probe("cfi_probe", &flash_map); if (mymtd) { mymtd->owner = THIS_MODULE; - - nr_parts = parse_mtd_partitions(mymtd, - part_probe_types, - &parts, 0); - mtd_device_register(mymtd, parts, nr_parts); + mtd_device_parse_register(mymtd, part_probe_types, + 0, NULL, 0); } else { pr_err("Failed to register MTD device for flash\n"); } -- cgit v0.10.2 From 5c200197130e307de6eba72fc335c83c9dd6a5bc Mon Sep 17 00:00:00 2001 From: Maksim Rayskiy Date: Thu, 10 Nov 2011 17:59:45 +0000 Subject: MIPS: ASID conflict after CPU hotplug I am running SMP Linux 2.6.37-rc1 on BMIPS5000 (single core dual thread) and observe some abnormalities when doing system suspend/resume which I narrowed down to cpu hotplugging. The suspend brings the second thread processor down and then restarts it, after which I see memory corruption in userspace. I started digging and found out that problem occurs because while doing execve() the child process is getting the same ASID as the parent, which obviously corrupts parent's address space. Further digging showed that activate_mm() calls get_new_mmu_context() to get a new ASID, but at this time ASID field in entryHi is 1, and asid_cache(cpu) is 0x100 (it was just reset to ASID_FIRST_VERSION when the secondary TP was booting). So, get_new_mmu_context() increments the asid_cache(cpu) value to 0x101, and thus puts 0x01 into entryHi. The result - ASID field does not get changed as it was supposed to. My solution is very simple - do not reset asid_cache(cpu) on TP warm restart. Patchwork: https://patchwork.linux-mips.org/patch/1797/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 261ccbc..5c8a49d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1596,7 +1596,8 @@ void __cpuinit per_cpu_trap_init(void) } #endif /* CONFIG_MIPS_MT_SMTC */ - cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; + if (!cpu_data[cpu].asid_cache) + cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; -- cgit v0.10.2 From d65670a78cdbfae94f20a9e05ec705871d7cdf2b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 31 Oct 2011 17:06:35 -0400 Subject: clocksource: Avoid selecting mult values that might overflow when adjusted For some frequencies, the clocks_calc_mult_shift() function will unfortunately select mult values very close to 0xffffffff. This has the potential to overflow when NTP adjusts the clock, adding to the mult value. This patch adds a clocksource.maxadj value, which provides an approximation of an 11% adjustment(NTP limits adjustments to 500ppm and the tick adjustment is limited to 10%), which could be made to the clocksource.mult value. This is then used to both check that the current mult value won't overflow/underflow, as well as warning us if the timekeeping_adjust() code pushes over that 11% boundary. v2: Fix max_adjustment calculation, and improve WARN_ONCE messages. v3: Don't warn before maxadj has actually been set CC: Yong Zhang CC: David Daney CC: Thomas Gleixner CC: Chen Jie CC: zhangfx CC: stable@kernel.org Reported-by: Chen Jie Reported-by: zhangfx Tested-by: Yong Zhang Signed-off-by: John Stultz diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 139c4db..c86c940 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) + * @maxadj maximum adjustment value to mult (~11%) * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary @@ -172,7 +173,7 @@ struct clocksource { u32 mult; u32 shift; u64 max_idle_ns; - + u32 maxadj; #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA struct arch_clocksource_data archdata; #endif diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index cf52fda..cfc65e1 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void) } /** + * clocksource_max_adjustment- Returns max adjustment amount + * @cs: Pointer to clocksource + * + */ +static u32 clocksource_max_adjustment(struct clocksource *cs) +{ + u64 ret; + /* + * We won't try to correct for more then 11% adjustments (110,000 ppm), + */ + ret = (u64)cs->mult * 11; + do_div(ret,100); + return (u32)ret; +} + +/** * clocksource_max_deferment - Returns max time the clocksource can be deferred * @cs: Pointer to clocksource * @@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs) /* * Calculate the maximum number of cycles that we can pass to the * cyc2ns function without overflowing a 64-bit signed result. The - * maximum number of cycles is equal to ULLONG_MAX/cs->mult which - * is equivalent to the below. - * max_cycles < (2^63)/cs->mult - * max_cycles < 2^(log2((2^63)/cs->mult)) - * max_cycles < 2^(log2(2^63) - log2(cs->mult)) - * max_cycles < 2^(63 - log2(cs->mult)) - * max_cycles < 1 << (63 - log2(cs->mult)) + * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj) + * which is equivalent to the below. + * max_cycles < (2^63)/(cs->mult + cs->maxadj) + * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj))) + * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj)) + * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj)) + * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj)) * Please note that we add 1 to the result of the log2 to account for * any rounding errors, ensure the above inequality is satisfied and * no overflow will occur. */ - max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1)); + max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1)); /* * The actual maximum number of cycles we can defer the clocksource is * determined by the minimum of max_cycles and cs->mask. + * Note: Here we subtract the maxadj to make sure we don't sleep for + * too long if there's a large negative adjustment. */ max_cycles = min_t(u64, max_cycles, (u64) cs->mask); - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift); + max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj, + cs->shift); /* * To ensure that the clocksource does not wrap whilst we are idle, @@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs) void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) { u64 sec; - /* * Calc the maximum number of seconds which we can run before * wrapping around. For clocksources which have a mask > 32bit @@ -661,6 +679,20 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, NSEC_PER_SEC / scale, sec * scale); + + /* + * for clocksources that have large mults, to avoid overflow. + * Since mult may be adjusted by ntp, add an safety extra margin + * + */ + cs->maxadj = clocksource_max_adjustment(cs); + while ((cs->mult + cs->maxadj < cs->mult) + || (cs->mult - cs->maxadj > cs->mult)) { + cs->mult >>= 1; + cs->shift--; + cs->maxadj = clocksource_max_adjustment(cs); + } + cs->max_idle_ns = clocksource_max_deferment(cs); } EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); @@ -701,6 +733,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale); */ int clocksource_register(struct clocksource *cs) { + /* calculate max adjustment for given mult/shift */ + cs->maxadj = clocksource_max_adjustment(cs); + WARN_ONCE(cs->mult + cs->maxadj < cs->mult, + "Clocksource %s might overflow on 11%% adjustment\n", + cs->name); + /* calculate max idle time permitted for this clocksource */ cs->max_idle_ns = clocksource_max_deferment(cs); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2b021b0e..e65ff31 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -820,6 +820,13 @@ static void timekeeping_adjust(s64 offset) } else return; + WARN_ONCE(timekeeper.clock->maxadj && + (timekeeper.mult + adj > timekeeper.clock->mult + + timekeeper.clock->maxadj), + "Adjusting %s more then 11%% (%ld vs %ld)\n", + timekeeper.clock->name, (long)timekeeper.mult + adj, + (long)timekeeper.clock->mult + + timekeeper.clock->maxadj); timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; -- cgit v0.10.2 From 2aa13531bbbc6582874bedfcd853e1058b0fb4f9 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Thu, 10 Nov 2011 14:33:23 +0300 Subject: SUNRPC: destroy freshly allocated transport in case of sockaddr init error Otherwise we will leak xprt structure and struct net reference. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index d7f97ef..2d78d95 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2530,8 +2530,10 @@ static struct rpc_xprt *xs_setup_xprt(struct xprt_create *args, int err; err = xs_init_anyaddr(args->dstaddr->sa_family, (struct sockaddr *)&new->srcaddr); - if (err != 0) + if (err != 0) { + xprt_free(xprt); return ERR_PTR(err); + } } return xprt; -- cgit v0.10.2 From 62e4a76987eab2b7fa952546614bc83e5bfc9d3e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 10 Nov 2011 14:30:37 -0500 Subject: NFS: Revert pnfs ugliness from the generic NFS read code path pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index c1a1bd8..3f4d957 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -299,6 +299,8 @@ extern void nfs_read_prepare(struct rpc_task *task, void *calldata); extern int nfs_generic_pagein(struct nfs_pageio_descriptor *desc, struct list_head *head); +extern void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, + struct inode *inode); extern void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio); extern void nfs_readdata_release(struct nfs_read_data *rdata); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index a2478bc..e40a3ca 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1259,6 +1259,25 @@ pnfs_generic_pg_writepages(struct nfs_pageio_descriptor *desc) } EXPORT_SYMBOL_GPL(pnfs_generic_pg_writepages); +static void pnfs_ld_handle_read_error(struct nfs_read_data *data) +{ + struct nfs_pageio_descriptor pgio; + + put_lseg(data->lseg); + data->lseg = NULL; + dprintk("pnfs write error = %d\n", data->pnfs_error); + + nfs_pageio_init_read_mds(&pgio, data->inode); + + while (!list_empty(&data->pages)) { + struct nfs_page *req = nfs_list_entry(data->pages.next); + + nfs_list_remove_request(req); + nfs_pageio_add_request(&pgio, req); + } + nfs_pageio_complete(&pgio); +} + /* * Called by non rpc-based layout drivers */ @@ -1267,11 +1286,8 @@ void pnfs_ld_read_done(struct nfs_read_data *data) if (likely(!data->pnfs_error)) { __nfs4_read_done_cb(data); data->mds_ops->rpc_call_done(&data->task, data); - } else { - put_lseg(data->lseg); - data->lseg = NULL; - dprintk("pnfs write error = %d\n", data->pnfs_error); - } + } else + pnfs_ld_handle_read_error(data); data->mds_ops->rpc_release(data); } EXPORT_SYMBOL_GPL(pnfs_ld_read_done); diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 8b48ec6..cfa175c 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -109,7 +109,7 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data) } } -static void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, +void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio, struct inode *inode) { nfs_pageio_init(pgio, inode, &nfs_pageio_read_ops, @@ -534,23 +534,13 @@ static void nfs_readpage_result_full(struct rpc_task *task, void *calldata) static void nfs_readpage_release_full(void *calldata) { struct nfs_read_data *data = calldata; - struct nfs_pageio_descriptor pgio; - if (data->pnfs_error) { - nfs_pageio_init_read_mds(&pgio, data->inode); - pgio.pg_recoalesce = 1; - } while (!list_empty(&data->pages)) { struct nfs_page *req = nfs_list_entry(data->pages.next); nfs_list_remove_request(req); - if (!data->pnfs_error) - nfs_readpage_release(req); - else - nfs_pageio_add_request(&pgio, req); + nfs_readpage_release(req); } - if (data->pnfs_error) - nfs_pageio_complete(&pgio); nfs_readdata_release(calldata); } -- cgit v0.10.2 From 7be620f79714b6598275bd5c71d89bb24dfe332e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2011 12:12:55 -0800 Subject: ARM: OMAP: Fix dpll_data compile error when omap2 only is selected Without this patch we get the following error: arch/arm/mach-omap2/clkt_dpll.c: In function '_dpll_test_fint': arch/arm/mach-omap2/clkt_dpll.c:98: error: 'struct dpll_data' has no member named 'flags' Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 197ca03..eb73ab4 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -165,8 +165,8 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - u8 flags; # endif + u8 flags; }; #endif -- cgit v0.10.2 From afef2cfa0ecf45dec7e88db9fa312ee82d347111 Mon Sep 17 00:00:00 2001 From: Charles Chin Date: Fri, 11 Nov 2011 08:05:28 +0100 Subject: ALSA: hda - pwr_nids cleanup for IDT codecs Clean up and fix pwr_nids for 92HD71 / 73 / 83 family codecs; remove pwr_mapping which was incorrect. The original pwr_nids support of 92HD83xxx was incorrect and never actually worked before. Now we should have things working correctly without having to hack by DID anymore. It is also not necessary to explicitly turn on all the pins near the beginning of patch_stac92hd83xxx() now, the pins will go though initialization properly. Tested on 92HD66 / 71 / 73 / 75 / 83 / 89 / 91 demo boards. Signed-off-by: Charles Chin Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index edc2b7b..470f6f2 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -227,7 +227,6 @@ struct sigmatel_spec { /* power management */ unsigned int num_pwrs; - const unsigned int *pwr_mapping; const hda_nid_t *pwr_nids; const hda_nid_t *dac_list; @@ -374,18 +373,15 @@ static const unsigned long stac92hd73xx_capvols[] = { #define STAC92HD83_DAC_COUNT 3 -static const hda_nid_t stac92hd83xxx_pwr_nids[4] = { - 0xa, 0xb, 0xd, 0xe, +static const hda_nid_t stac92hd83xxx_pwr_nids[7] = { + 0x0a, 0x0b, 0x0c, 0xd, 0x0e, + 0x0f, 0x10 }; static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = { 0x1e, 0, }; -static const unsigned int stac92hd83xxx_pwr_mapping[4] = { - 0x03, 0x0c, 0x20, 0x40, -}; - static const hda_nid_t stac92hd83xxx_dmic_nids[] = { 0x11, 0x20, }; @@ -4470,8 +4466,12 @@ static int stac92xx_init(struct hda_codec *codec) stac_toggle_power_map(codec, nid, 1); continue; } - if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) + if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) { stac_issue_unsol_event(codec, nid); + continue; + } + /* none of the above, turn the port OFF */ + stac_toggle_power_map(codec, nid, 0); } /* sync mute LED */ @@ -4727,11 +4727,7 @@ static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid, if (idx >= spec->num_pwrs) return; - /* several codecs have two power down bits */ - if (spec->pwr_mapping) - idx = spec->pwr_mapping[idx]; - else - idx = 1 << idx; + idx = 1 << idx; val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff; if (enable) @@ -5629,9 +5625,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e); } - /* reset pin power-down; Windows may leave these bits after reboot */ - snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0); - snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0); codec->no_trigger_sense = 1; codec->spec = spec; @@ -5641,7 +5634,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs; spec->digbeep_nid = 0x21; spec->pwr_nids = stac92hd83xxx_pwr_nids; - spec->pwr_mapping = stac92hd83xxx_pwr_mapping; spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids; spec->init = stac92hd83xxx_core_init; @@ -5658,9 +5650,6 @@ again: stac92xx_set_config_regs(codec, stac92hd83xxx_brd_tbl[spec->board_config]); - if (spec->board_config != STAC_92HD83XXX_PWR_REF) - spec->num_pwrs = 0; - codec->patch_ops = stac92xx_patch_ops; if (find_mute_led_gpio(codec, 0)) @@ -5869,8 +5858,6 @@ again: (codec->revision_id & 0xf) == 1) spec->stream_delay = 40; /* 40 milliseconds */ - /* no output amps */ - spec->num_pwrs = 0; /* disable VSW */ spec->init = stac92hd71bxx_core_init; unmute_init++; @@ -5885,8 +5872,6 @@ again: if ((codec->revision_id & 0xf) == 1) spec->stream_delay = 40; /* 40 milliseconds */ - /* no output amps */ - spec->num_pwrs = 0; /* fallthru */ default: spec->init = stac92hd71bxx_core_init; -- cgit v0.10.2 From 7a401a972df8e184b3d1a3fc958c0a4ddee8d312 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 11 Nov 2011 13:29:04 +0100 Subject: backing-dev: ensure wakeup_timer is deleted bdi_prune_sb() in bdi_unregister() attempts to removes the bdi links from all super_blocks and then del_timer_sync() the writeback timer. However, this can race with __mark_inode_dirty(), leading to bdi_wakeup_thread_delayed() rearming the writeback timer on the bdi we're unregistering, after we've called del_timer_sync(). This can end up with the bdi being freed with an active timer inside it, as in the case of the following dump after the removal of an SD card. Fix this by redoing the del_timer_sync() in bdi_destory(). ------------[ cut here ]------------ WARNING: at /home/rabin/kernel/arm/lib/debugobjects.c:262 debug_print_object+0x9c/0xc8() ODEBUG: free active (active state 0) object type: timer_list hint: wakeup_timer_fn+0x0/0x180 Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) r6:c02bc638 r5:00000106 r4:c79f5d18 r3:00000000 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40) r8:20000013 r7:c780c6f0 r6:c031613c r5:c780c6f0 r4:c02b1b29 r3:00000009 [] (warn_slowpath_fmt+0x0/0x40) from [] (debug_print_object+0x9c/0xc8) r3:c02b1b29 r2:c02bc662 [] (debug_print_object+0x0/0xc8) from [] (debug_check_no_obj_freed+0xac/0x1dc) r6:c7964000 r5:00000001 r4:c7964000 [] (debug_check_no_obj_freed+0x0/0x1dc) from [] (kmem_cache_free+0x88/0x1f8) [] (kmem_cache_free+0x0/0x1f8) from [] (blk_release_queue+0x70/0x78) [] (blk_release_queue+0x0/0x78) from [] (kobject_release+0x70/0x84) r5:c79641f0 r4:c796420c [] (kobject_release+0x0/0x84) from [] (kref_put+0x68/0x80) r7:00000083 r6:c74083d0 r5:c015289c r4:c796420c [] (kref_put+0x0/0x80) from [] (kobject_put+0x48/0x5c) r5:c79643b4 r4:c79641f0 [] (kobject_put+0x0/0x5c) from [] (blk_cleanup_queue+0x68/0x74) r4:c7964000 [] (blk_cleanup_queue+0x0/0x74) from [] (mmc_blk_put+0x78/0xe8) r5:00000000 r4:c794c400 [] (mmc_blk_put+0x0/0xe8) from [] (mmc_blk_release+0x24/0x38) r5:c794c400 r4:c0322824 [] (mmc_blk_release+0x0/0x38) from [] (__blkdev_put+0xe8/0x170) r5:c78d5e00 r4:c74083c0 [] (__blkdev_put+0x0/0x170) from [] (blkdev_put+0x11c/0x12c) r8:c79f5f70 r7:00000001 r6:c74083d0 r5:00000083 r4:c74083c0 r3:00000000 [] (blkdev_put+0x0/0x12c) from [] (kill_block_super+0x60/0x6c) r7:c7942300 r6:c79f4000 r5:00000083 r4:c74083c0 [] (kill_block_super+0x0/0x6c) from [] (deactivate_locked_super+0x44/0x70) r6:c79f4000 r5:c031af64 r4:c794dc00 r3:c00b06c4 [] (deactivate_locked_super+0x0/0x70) from [] (deactivate_super+0x6c/0x70) r5:c794dc00 r4:c794dc00 [] (deactivate_super+0x0/0x70) from [] (mntput_no_expire+0x188/0x194) r5:c794dc00 r4:c7942300 [] (mntput_no_expire+0x0/0x194) from [] (sys_umount+0x2e4/0x310) r6:c7942300 r5:00000000 r4:00000000 r3:00000000 [] (sys_umount+0x0/0x310) from [] (ret_fast_syscall+0x0/0x30) ---[ end trace e5c83c92ada51c76 ]--- Cc: stable@kernel.org Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Jens Axboe diff --git a/mm/backing-dev.c b/mm/backing-dev.c index a086064..71034f4 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -724,6 +724,14 @@ void bdi_destroy(struct backing_dev_info *bdi) bdi_unregister(bdi); + /* + * If bdi_unregister() had already been called earlier, the + * wakeup_timer could still be armed because bdi_prune_sb() + * can race with the bdi_wakeup_thread_delayed() calls from + * __mark_inode_dirty(). + */ + del_timer_sync(&bdi->wb.wakeup_timer); + for (i = 0; i < NR_BDI_STAT_ITEMS; i++) percpu_counter_destroy(&bdi->bdi_stat[i]); -- cgit v0.10.2 From cf16123c9c8e346ed1dd171295a678d77648d7f8 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Fri, 11 Nov 2011 13:42:16 +0400 Subject: [SCSI] aacraid: controller hangs if kernel uses non-default ASPM policy Aacraid controller can hang on some nodes if kernel uses non-default (powersave) ASPM policy. Controller hangs shortly after successful load and hardware detection. Scsi error handler detects this hang and tries to restart hardware but it does not help. Initially it was noticed on RHEL6-based openVZ kernel after backporting aacraid driver from mainline (RHEL6 kernel with original driver works well) http://bugzilla.openvz.org/show_bug.cgi?id=2043 This issue happens because default ASPM policy was changed in Red Hat kernels. Therefore guys from Red Hat have noticed this problem long time ago: on Fedora 12 https://bugzilla.redhat.com/show_bug.cgi?id=540478 on Fedora 14 https://bugzilla.redhat.com/show_bug.cgi?id=679385 In RHEL6 kernel this issue was fixed, ASPM was disabled in aacraid driver. In kernel changelog I've found that seems it was done by Matthew Garrett: - [scsi] aacraid: Disable ASPM by default (Matthew Garrett) [599735] However seems this patch was not submitted to mainline. I've reproduced this issue on vanilla 3.1.0 kernel booted with "pcie_aspm.policy=powersave" option, So I believe it makes sense to do it now. Signed-off-by: Vasily Averin [mjg: Checking the Windows drivers indicates that they disable ASPM under all circumstances, so:] Acked-by: Matthew Garrett Acked-by: Achim Leubner Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 4aa76d6..705e13e 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -1109,6 +1110,9 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, unique_id++; } + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + error = pci_enable_device(pdev); if (error) goto out; -- cgit v0.10.2 From 6a53fc531dcf4719e80d0152ca044e35b0f92591 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 25 Aug 2011 08:52:36 -0300 Subject: ARM: imx: Remove unused chip revision strings Since commit (167a19d2: ARM: imx: Introduce generic function for displaying silicon revision) we no longer need the chip revision strings, so remove them. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 00a7819..a4d36d6 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -50,20 +50,6 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff -#define IMX_CHIP_REVISION_1_0_STRING "1.0" -#define IMX_CHIP_REVISION_1_1_STRING "1.1" -#define IMX_CHIP_REVISION_1_2_STRING "1.2" -#define IMX_CHIP_REVISION_1_3_STRING "1.3" -#define IMX_CHIP_REVISION_2_0_STRING "2.0" -#define IMX_CHIP_REVISION_2_1_STRING "2.1" -#define IMX_CHIP_REVISION_2_2_STRING "2.2" -#define IMX_CHIP_REVISION_2_3_STRING "2.3" -#define IMX_CHIP_REVISION_3_0_STRING "3.0" -#define IMX_CHIP_REVISION_3_1_STRING "3.1" -#define IMX_CHIP_REVISION_3_2_STRING "3.2" -#define IMX_CHIP_REVISION_3_3_STRING "3.3" -#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" - #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif -- cgit v0.10.2 From 8c6d8319eca370f804fb8e1fcf7070b587d1b81d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Nov 2011 13:09:18 +0800 Subject: arm/imx: remove imx_idle hook and use pm_idle instead The patch removes imx_idle hook and use pm_idle instead to get imx arch_idle prepared for the cleanup. It's suggested by Russel King as below. > The final removal of mach/system.h depends on getting rid of the arch_idle > thing. While going through these headers, I was dismayed to find these: > > arch/arm/mach-s3c2410/include/mach/system.h:void (*s3c24xx_idle)(void); > arch/arm/plat-mxc/include/mach/system.h:extern void (*imx_idle)(void); > > when we have a perfectly good pm_idle hook already in place - so there's > no excuse for these especially when other platforms are already using > pm_idle to hook their platform specific idle function into. This is > something that better be gone at the next merge window! Suggested-by: Russell King Signed-off-by: Shawn Guo Acked-by: Russell King Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82e..6d01de3 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -33,29 +33,32 @@ static void imx3_idle(void) { unsigned long reg = 0; - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); + + if (!need_resched()) + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + local_irq_enable(); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -143,7 +146,7 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } @@ -152,7 +155,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 26eacc9..df4a508f 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -23,7 +23,9 @@ static void imx5_idle(void) { - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (!need_resched()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + local_irq_enable(); } /* @@ -89,7 +91,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - imx_idle = imx5_idle; + pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a..7143d52 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode { }; extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); -extern void (*imx_idle)(void); extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index cf88b35..b9895d2 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -17,14 +17,9 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -extern void (*imx_idle)(void); - static inline void arch_idle(void) { - if (imx_idle != NULL) - (imx_idle)(); - else - cpu_do_idle(); + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dc..a0bcccf 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -28,7 +28,6 @@ #include #include -void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; static void __iomem *wdog_base; -- cgit v0.10.2 From 71ca86937513f44151454cb6aa8a66e9ed86275a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Nov 2011 14:15:57 +0000 Subject: MIPS: Fix build error due to missing inclusion of . Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 4ee5710..b5ce041 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -7,6 +7,7 @@ * Support for all devices (greater than 16) added by David Gathright. */ +#include #include #include #include -- cgit v0.10.2 From 43e58856585f8c61e6a4a0f1fd6996d78799a973 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Nov 2011 16:50:50 -0800 Subject: iwlwifi: avoid a panic when unloading the module with RF Kill When HW RF kill switch is set to kill the radio, our NIC issues an interrupt after we stop the APM module. When we unload the module, the driver disables and cleans the interrupts before stopping the APM. So we have a real interrupt (inta not zero) pending. When this interrupts pops up the tasklet has already been killed and we crash. Here is a logical description of the flow: disable and clean interrupts synchronize interrupts kill the tasklet stop the APM <<== creates an RF kill interrupt free_irq <<== somehow our ISR is called here and we crash Here is the panic message: [ 201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150 [ 201.314541] IP: [] tasklet_action+0x62/0x130 [ 201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160 [ 201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 201.317324] CPU 1 [ 201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs] [ 201.323839] [ 201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC [ 201.324736] RIP: 0010:[] [] tasklet_action+0x62/0x130 [ 201.325128] RSP: 0018:ffff88011bc43ea0 EFLAGS: 00010286 [ 201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028 [ 201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000 [ 201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000 [ 201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001 [ 201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8 [ 201.326431] FS: 00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000 [ 201.326657] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0 [ 201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000) [ 201.327747] Stack: [ 201.330494] 0000000000000046 0000000000000030 0000000000000001 0000000000000006 [ 201.333870] ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08 [ 201.337186] 0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006 [ 201.340458] Call Trace: [ 201.342994] [ 201.345656] [] __do_softirq+0xca/0x250 [ 201.348185] [] ? pde_put+0x76/0x90 [ 201.350730] [] ? do_raw_spin_unlock+0x5e/0xb0 [ 201.353261] [] ? pde_put+0x76/0x90 [ 201.355776] [] call_softirq+0x1c/0x30 [ 201.358287] [] do_softirq+0x9d/0xd0 [ 201.360823] [] irq_exit+0xd5/0xf0 [ 201.363330] [] do_IRQ+0x66/0xe0 [ 201.365819] [] common_interrupt+0x73/0x73 [ 201.368257] Cc: 3.1+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index da34110..ce91898 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -990,29 +990,16 @@ static int iwl_trans_tx_stop(struct iwl_trans *trans) return 0; } -static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans) +static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) { unsigned long flags; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + /* tell the device to stop sending interrupts */ spin_lock_irqsave(&trans->shrd->lock, flags); iwl_disable_interrupts(trans); spin_unlock_irqrestore(&trans->shrd->lock, flags); - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(bus(trans)->irq); - tasklet_kill(&trans_pcie->irq_tasklet); -} - -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) -{ - /* stop and reset the on-board processor */ - iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - iwl_trans_pcie_disable_sync_irq(trans); - /* device going down, Stop using ICT table */ iwl_disable_ict(trans); @@ -1039,6 +1026,20 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) /* Stop the device, and put it in low power state */ iwl_apm_stop(priv(trans)); + + /* Upon stop, the APM issues an interrupt if HW RF kill is set. + * Clean again the interrupt here + */ + spin_lock_irqsave(&trans->shrd->lock, flags); + iwl_disable_interrupts(trans); + spin_unlock_irqrestore(&trans->shrd->lock, flags); + + /* wait to make sure we flush pending tasklet*/ + synchronize_irq(bus(trans)->irq); + tasklet_kill(&trans_pcie->irq_tasklet); + + /* stop and reset the on-board processor */ + iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); } static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, -- cgit v0.10.2 From fada10584d3890258e59da73728510ad7e08a033 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 9 Nov 2011 21:36:21 -0800 Subject: mwifiex: fix association issue with AP configured in hidden SSID mode Firmware expects 'max_ssid_length' field in 'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for performing SSID specific scan. Currently driver updates it with an actual SSID length. Hence UUT is not able to find the AP configured in hidden SSID mode in scan results and association fails. max_ssid_length is filled with '0' to fix the issue. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 8a3f959..8d3ab37 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -819,8 +819,10 @@ mwifiex_scan_setup_scan_config(struct mwifiex_private *priv, wildcard_ssid_tlv->header.len = cpu_to_le16( (u16) (ssid_len + sizeof(wildcard_ssid_tlv-> max_ssid_length))); - wildcard_ssid_tlv->max_ssid_length = - user_scan_in->ssid_list[ssid_idx].max_len; + + /* max_ssid_length = 0 tells firmware to perform + specific scan for the SSID filled */ + wildcard_ssid_tlv->max_ssid_length = 0; memcpy(wildcard_ssid_tlv->ssid, user_scan_in->ssid_list[ssid_idx].ssid, -- cgit v0.10.2 From 0027cb3e1947d0f453fece40ed16764fb362bac6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:40:37 +0900 Subject: PCI: pciehp: wait 1000 ms before Link Training check We need to wait for 1000 ms after Data Link Layer Link Active (DLLLA) bit reads 1b before sending configuration request. Currently pciehp does this wait after checking Link Training (LT) bit. But we need it before checking LT bit because LT is still set even after DLLLA bit is set on some platforms. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 1e9c9aa..085dbb5 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -213,9 +213,6 @@ static int board_added(struct slot *p_slot) goto err_exit; } - /* Wait for 1 second after checking link training status */ - msleep(1000); - /* Check for a power fault */ if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) { ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot)); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6692832..81a177a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -280,6 +280,14 @@ int pciehp_check_link_status(struct controller *ctrl) else msleep(1000); + /* + * Need to wait for 1000 ms after Data Link Layer Link Active + * (DLLLA) bit reads 1b before sending configuration request. + * We need it before checking Link Training (LT) bit becuase + * LT is still set even after DLLLA bit is set on some platform. + */ + msleep(1000); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); if (retval) { ctrl_err(ctrl, "Cannot read LNKSTATUS register\n"); -- cgit v0.10.2 From b3c004542229099e18198061c737e13eafc8d4d6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:42:16 +0900 Subject: PCI: pciehp: wait 100 ms after Link Training check If the port supports Link speeds greater than 5.0 GT/s, we must wait for 100 ms after Link training completes before sending configuration request. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 81a177a..7b14148 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -302,6 +302,14 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + /* + * If the port supports Link speeds greater than 5.0 GT/s, we + * must wait for 100 ms after Link training completes before + * sending configuration request. + */ + if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT) + msleep(100); + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); return retval; -- cgit v0.10.2 From 774ac21da76f5c3018428725074e27a3fd40b128 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 11 Nov 2011 09:48:08 -0800 Subject: ceph: initialize root dentry Set up d_fsdata on the root dentry. This fixes a NULL pointer dereference in ceph_d_prune on umount. It also means we can eventually strip out all of the conditional checks on d_fsdata because it is now set unconditionally (prior to setting up the d_ops). Fix the ceph_d_prune debug print while we're here. Signed-off-by: Sage Weil diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index 2abd0df..bca3948 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -1143,7 +1143,7 @@ static void ceph_d_prune(struct dentry *dentry) { struct ceph_dentry_info *di; - dout("d_release %p\n", dentry); + dout("ceph_d_prune %p\n", dentry); /* do we have a valid parent? */ if (!dentry->d_parent || IS_ROOT(dentry)) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index a90846f..8dc73a5 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -638,10 +638,12 @@ static struct dentry *open_root_dentry(struct ceph_fs_client *fsc, if (err == 0) { dout("open_root_inode success\n"); if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT && - fsc->sb->s_root == NULL) + fsc->sb->s_root == NULL) { root = d_alloc_root(req->r_target_inode); - else + ceph_init_dentry(root); + } else { root = d_obtain_alias(req->r_target_inode); + } req->r_target_inode = NULL; dout("open_root_inode success, root dentry is %p\n", root); } else { -- cgit v0.10.2 From 224736d9113ab4a7cf3f05c05377492bd99b4b02 Mon Sep 17 00:00:00 2001 From: Stratos Psomadakis Date: Thu, 10 Nov 2011 15:45:37 +0200 Subject: libceph: Allocate larger oid buffer in request msgs ceph_osd_request struct allocates a 40-byte buffer for object names. RBD image names can be up to 96 chars long (100 with the .rbd suffix), which results in the object name for the image being truncated, and a subsequent map failure. Increase the oid buffer in request messages, in order to avoid the truncation. Signed-off-by: Stratos Psomadakis Signed-off-by: Sage Weil diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index f88eacb..7c05ac2 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -10,6 +10,12 @@ #include "osdmap.h" #include "messenger.h" +/* + * Maximum object name size + * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) + */ +#define MAX_OBJ_NAME_SIZE 100 + struct ceph_msg; struct ceph_snap_context; struct ceph_osd_request; @@ -75,7 +81,7 @@ struct ceph_osd_request { struct inode *r_inode; /* for use by callbacks */ void *r_priv; /* ditto */ - char r_oid[40]; /* object name */ + char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */ int r_oid_len; unsigned long r_stamp; /* send OR check time */ diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 733e4600..f4f3f58 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -244,7 +244,7 @@ struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc, ceph_pagelist_init(req->r_trail); } /* create request message; allow space for oid */ - msg_size += 40; + msg_size += MAX_OBJ_NAME_SIZE; if (snapc) msg_size += sizeof(u64) * snapc->num_snaps; if (use_mempool) -- cgit v0.10.2 From e9b7086b80c4d9e354f4edc9e280ae85a60df408 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Nov 2011 10:15:11 -0800 Subject: ARM: OMAP: Fix reprogramming of dpll1 rate Commit a66cb3454f220f49f900646ebdc76cb943319eb7 (ARM: OMAP: Map SRAM later on with ioremap_exec()) moved the SRAM init to happen later to remove a dependency to early SoC detection for map_io. This broke booting on some boards not using Kconfig option for OMAP_CLOCKS_SET_BY_BOOTLOADER as the dpll1 reprogramming would cause the following error: kernel BUG at arch/arm/plat-omap/sram.c:226! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.2.0-rc1-e3 #9) PC is at omap_sram_reprogram_clock+0x28/0x30 LR is at omap1_select_table_rate+0x88/0xb4 pc : [] lr : [] psr: 600000d3 sp : c035bf10 ip : c035bf20 fp : c035bf1c r10: c035bfd4 r9 : 54029252 r8 : c03f8120 r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40 r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc035a270) Stack: (0xc035bf10 to 0xc035c000) bf00: c035bf3c c035bf20 c0019f54 c001b0ac bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40 c033ea24 c0019edc bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c 02000000 c035ed4c bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec c035bfc4 c035bf88 bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000 00000000 00000000 bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4 c035bff4 c035bfc8 bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c 0000317d c035c03c bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508 00000000 00000000 Backtrace: [] (omap_sram_reprogram_clock+0x0/0x30) from [] (omap1_select_table_rate+0x88/0xb4) [] (omap1_select_table_rate+0x0/0xb4) from [] (omap1_clk_init+0x148/0x334) r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000 [] (omap1_clk_init+0x0/0x334) from [] (omap1_init_early+0x34/0x48) r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c [] (omap1_init_early+0x0/0x48) from [] (setup_arch+0x69c/0x79c) [] (setup_arch+0x0/0x79c) from [] (start_kernel+0x7c/0x2f4) [] (start_kernel+0x0/0x2f4) from [<10008040>] (0x10008040) r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2) Fix this by adding omap1_clk_late_init() that only reprograms dpll1 if the bootloader rate is less than 60MHz. This also allows removing of the OMAP_CLOCKS_SET_BY_BOOTLOADER option. Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7b63462..a7e7775 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y CONFIG_OMAP_ARM_216MHZ=y CONFIG_OMAP_ARM_195MHZ=y CONFIG_OMAP_ARM_192MHZ=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e0a0281..73f287d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC comment "OMAP CPU Speed" depends on ARCH_OMAP1 -config OMAP_CLOCKS_SET_BY_BOOTLOADER - bool "OMAP clocks set by bootloader" - depends on ARCH_OMAP1 - help - Enable this option to prevent the kernel from overriding the clock - frequencies programmed by bootloader for MPU, DSP, MMUs, TC, - internal LCD controller and MPU peripherals. - config OMAP_ARM_216MHZ bool "OMAP ARM 216 MHz CPU (1710 only)" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index eaf09ef..16b1423 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -17,7 +17,8 @@ #include -extern int __init omap1_clk_init(void); +int omap1_clk_init(void); +void omap1_clk_late_init(void); extern int omap1_clk_enable(struct clk *clk); extern void omap1_clk_disable(struct clk *clk); extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 92400b9..1297bb5 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = { .clk_disable_unused = omap1_clk_disable_unused, }; +static void __init omap1_show_rates(void) +{ + pr_notice("Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); +} + int __init omap1_clk_init(void) { struct omap_clk *c; @@ -835,9 +844,12 @@ int __init omap1_clk_init(void) /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. + + /* + * Initially use the values set by bootloader. Determine PLL rate and + * recalculate dependent clocks as if kernel had changed PLL or + * divisors. See also omap1_clk_late_init() that can reprogram dpll1 + * after the SRAM is initialized. */ { unsigned pll_ctl_val = omap_readw(DPLL_CTL); @@ -862,25 +874,10 @@ int __init omap1_clk_init(void) } } } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - + omap1_show_rates(); if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -925,3 +922,21 @@ int __init omap1_clk_init(void) return 0; } + +#define OMAP1_DPLL1_SANE_VALUE 60000000 + +void __init omap1_clk_late_init(void) +{ + if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + return; + + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + pr_err("System frequencies not set, using default. Check your config.\n"); + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; + } + propagate_rate(&ck_dpll1); + omap1_show_rates(); +} diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 48ef988..475cb2f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -30,6 +30,8 @@ #include #include +#include "clock.h" + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -293,6 +295,7 @@ static int __init omap1_init_devices(void) return -ENODEV; omap_sram_init(); + omap1_clk_late_init(); /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. -- cgit v0.10.2 From 40809565ca57a8e94bae20b22da014c44ec233f6 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Thu, 10 Nov 2011 15:02:22 -0800 Subject: Smack: smackfs cipso seq read repair Commit 272cd7a8c67dd40a31ecff76a503bbb84707f757 introduced a change to the way rule lists are handled and reported in the smackfs filesystem. One of the issues addressed had to do with the termination of read requests on /smack/load. This change introduced a error in /smack/cipso, which shares some of the same list processing code. This patch updates all the file access list handling in smackfs to use the code introduced for /smack/load. Signed-off-by: Casey Schaufler diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index 6aceef5..5c32f36 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -102,9 +102,6 @@ static int smk_cipso_doi_value = SMACK_CIPSO_DOI_DEFAULT; const char *smack_cipso_option = SMACK_CIPSO_OPTION; - -#define SEQ_READ_FINISHED ((loff_t)-1) - /* * Values for parsing cipso rules * SMK_DIGITLEN: Length of a digit field in a rule. @@ -357,10 +354,12 @@ static ssize_t smk_write_load_list(struct file *file, const char __user *buf, rc = count; /* + * If this is "load" as opposed to "load-self" and a new rule + * it needs to get added for reporting. * smk_set_access returns true if there was already a rule * for the subject/object pair, and false if it was new. */ - if (!smk_set_access(rule, rule_list, rule_lock)) { + if (load && !smk_set_access(rule, rule_list, rule_lock)) { smlp = kzalloc(sizeof(*smlp), GFP_KERNEL); if (smlp != NULL) { smlp->smk_rule = rule; @@ -377,12 +376,12 @@ out: return rc; } - /* - * Seq_file read operations for /smack/load + * Core logic for smackfs seq list operations. */ -static void *load_seq_start(struct seq_file *s, loff_t *pos) +static void *smk_seq_start(struct seq_file *s, loff_t *pos, + struct list_head *head) { struct list_head *list; @@ -390,7 +389,7 @@ static void *load_seq_start(struct seq_file *s, loff_t *pos) * This is 0 the first time through. */ if (s->index == 0) - s->private = &smack_rule_list; + s->private = head; if (s->private == NULL) return NULL; @@ -404,11 +403,12 @@ static void *load_seq_start(struct seq_file *s, loff_t *pos) return list; } -static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos) +static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos, + struct list_head *head) { struct list_head *list = v; - if (list_is_last(list, &smack_rule_list)) { + if (list_is_last(list, head)) { s->private = NULL; return NULL; } @@ -416,6 +416,25 @@ static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos) return list->next; } +static void smk_seq_stop(struct seq_file *s, void *v) +{ + /* No-op */ +} + +/* + * Seq_file read operations for /smack/load + */ + +static void *load_seq_start(struct seq_file *s, loff_t *pos) +{ + return smk_seq_start(s, pos, &smack_rule_list); +} + +static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + return smk_seq_next(s, v, pos, &smack_rule_list); +} + static int load_seq_show(struct seq_file *s, void *v) { struct list_head *list = v; @@ -446,16 +465,11 @@ static int load_seq_show(struct seq_file *s, void *v) return 0; } -static void load_seq_stop(struct seq_file *s, void *v) -{ - /* No-op */ -} - static const struct seq_operations load_seq_ops = { .start = load_seq_start, .next = load_seq_next, .show = load_seq_show, - .stop = load_seq_stop, + .stop = smk_seq_stop, }; /** @@ -574,28 +588,12 @@ static void smk_unlbl_ambient(char *oldambient) static void *cipso_seq_start(struct seq_file *s, loff_t *pos) { - if (*pos == SEQ_READ_FINISHED) - return NULL; - if (list_empty(&smack_known_list)) - return NULL; - - return smack_known_list.next; + return smk_seq_start(s, pos, &smack_known_list); } static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct list_head *list = v; - - /* - * labels with no associated cipso value wont be printed - * in cipso_seq_show - */ - if (list_is_last(list, &smack_known_list)) { - *pos = SEQ_READ_FINISHED; - return NULL; - } - - return list->next; + return smk_seq_next(s, v, pos, &smack_known_list); } /* @@ -634,16 +632,11 @@ static int cipso_seq_show(struct seq_file *s, void *v) return 0; } -static void cipso_seq_stop(struct seq_file *s, void *v) -{ - /* No-op */ -} - static const struct seq_operations cipso_seq_ops = { .start = cipso_seq_start, - .stop = cipso_seq_stop, .next = cipso_seq_next, .show = cipso_seq_show, + .stop = smk_seq_stop, }; /** @@ -788,23 +781,12 @@ static const struct file_operations smk_cipso_ops = { static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos) { - if (*pos == SEQ_READ_FINISHED) - return NULL; - if (list_empty(&smk_netlbladdr_list)) - return NULL; - return smk_netlbladdr_list.next; + return smk_seq_start(s, pos, &smk_netlbladdr_list); } static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct list_head *list = v; - - if (list_is_last(list, &smk_netlbladdr_list)) { - *pos = SEQ_READ_FINISHED; - return NULL; - } - - return list->next; + return smk_seq_next(s, v, pos, &smk_netlbladdr_list); } #define BEBITS (sizeof(__be32) * 8) @@ -828,16 +810,11 @@ static int netlbladdr_seq_show(struct seq_file *s, void *v) return 0; } -static void netlbladdr_seq_stop(struct seq_file *s, void *v) -{ - /* No-op */ -} - static const struct seq_operations netlbladdr_seq_ops = { .start = netlbladdr_seq_start, - .stop = netlbladdr_seq_stop, .next = netlbladdr_seq_next, .show = netlbladdr_seq_show, + .stop = smk_seq_stop, }; /** @@ -1405,23 +1382,14 @@ static void *load_self_seq_start(struct seq_file *s, loff_t *pos) { struct task_smack *tsp = current_security(); - if (*pos == SEQ_READ_FINISHED) - return NULL; - if (list_empty(&tsp->smk_rules)) - return NULL; - return tsp->smk_rules.next; + return smk_seq_start(s, pos, &tsp->smk_rules); } static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos) { struct task_smack *tsp = current_security(); - struct list_head *list = v; - if (list_is_last(list, &tsp->smk_rules)) { - *pos = SEQ_READ_FINISHED; - return NULL; - } - return list->next; + return smk_seq_next(s, v, pos, &tsp->smk_rules); } static int load_self_seq_show(struct seq_file *s, void *v) @@ -1453,16 +1421,11 @@ static int load_self_seq_show(struct seq_file *s, void *v) return 0; } -static void load_self_seq_stop(struct seq_file *s, void *v) -{ - /* No-op */ -} - static const struct seq_operations load_self_seq_ops = { .start = load_self_seq_start, .next = load_self_seq_next, .show = load_self_seq_show, - .stop = load_self_seq_stop, + .stop = smk_seq_stop, }; -- cgit v0.10.2 From 193733585692301f38d489b8ad8724c2f88349c0 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 11 Nov 2011 22:05:54 +0100 Subject: The Windows driver .inf disables ASPM on all cciss devices. Do the same. Signed-off-by: Matthew Garrett Cc: iss_storagedev@hp.com Acked-by: Mike Miller Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 486f94e..5b69019 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -4319,6 +4320,10 @@ static int __devinit cciss_pci_init(ctlr_info_t *h) dev_warn(&h->pdev->dev, "controller appears to be disabled\n"); return -ENODEV; } + + pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | + PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); + err = pci_enable_device(h->pdev); if (err) { dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n"); -- cgit v0.10.2 From e7c86c7b264c57b4d6d121c48ce3be98a2e6f8c5 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 9 Nov 2011 22:10:00 +0100 Subject: ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF fae2b89ab1 (ARM: l2x0: add empty l2x0_of_init) adds a static inline function that returns -ENODEV, but at least on tegra cache-l2x0.h is included without errno.h being pulled in first, resulting in compile errors if OF isn't enabled: In file included from arch/arm/mach-tegra/common.c:26: arch/arm/include/asm/hardware/cache-l2x0.h: In function 'l2x0_of_init': arch/arm/include/asm/hardware/cache-l2x0.h:110: error: 'ENODEV' undeclared (first use in this function) arch/arm/include/asm/hardware/cache-l2x0.h:110: error: (Each undeclared identifier is reported only once arch/arm/include/asm/hardware/cache-l2x0.h:110: error: for each function it appears in.) Add errno.h to the include file to make it self-contained. Signed-off-by: Olof Johansson Acked-by: Rob Herring Signed-off-by: Russell King diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 1db1143..7df239b 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_HARDWARE_L2X0_H #define __ASM_ARM_HARDWARE_L2X0_H +#include + #define L2X0_CACHE_ID 0x000 #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 -- cgit v0.10.2 From a6dc54460e5405248773abef704c7980ab31af77 Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Thu, 10 Nov 2011 07:05:41 +0100 Subject: ARM: 7157/1: fix a building WARNING for nuc900 This patch is to fix a WARNING which is the "modpost: Found 1 section mismatch(es)" for nuc900 platform. Signed-off-by: Wan ZongShun Signed-off-by: Russell King diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 7a1fa6a..5b0c38a 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = { /* LCD controller*/ -static struct nuc900fb_display __initdata nuc900_lcd_info[] = { +static struct nuc900fb_display nuc900_lcd_info[] = { /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ [0] = { .type = LCM_DCCS_VA_SRC_RGB565, @@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = { }, }; -static struct nuc900fb_mach_info nuc900_fb_info __initdata = { +static struct nuc900fb_mach_info nuc900_fb_info = { #if defined(CONFIG_GPM1040A0_320X240) .displays = &nuc900_lcd_info[0], #else -- cgit v0.10.2 From 798681bf2127e60f16e9decc5e3a0b901f3ff3fe Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Thu, 10 Nov 2011 07:06:29 +0100 Subject: ARM: 7158/1: add new MFP implement for NUC900 This patch is to add new MFP implement in mfp.c,since nuc900 mmc driver needs this function support. Signed-off-by: Wan ZongShun Signed-off-by: Russell King diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h index 94c0e71..23ef1f5 100644 --- a/arch/arm/mach-w90x900/include/mach/mfp.h +++ b/arch/arm/mach-w90x900/include/mach/mfp.h @@ -19,6 +19,7 @@ extern void mfp_set_groupf(struct device *dev); extern void mfp_set_groupc(struct device *dev); extern void mfp_set_groupi(struct device *dev); -extern void mfp_set_groupg(struct device *dev); +extern void mfp_set_groupg(struct device *dev, const char *subname); +extern void mfp_set_groupd(struct device *dev, const char *subname); #endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h index bd94819..2c4e0c1 100644 --- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h +++ b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARCH_SPI_H #define __ASM_ARCH_SPI_H -extern void mfp_set_groupg(struct device *dev); +extern void mfp_set_groupg(struct device *dev, const char *subname); struct nuc900_spi_info { unsigned int num_cs; diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c index fb7fb62..9dd7461 100644 --- a/arch/arm/mach-w90x900/mfp.c +++ b/arch/arm/mach-w90x900/mfp.c @@ -26,10 +26,8 @@ #define REG_MFSEL (W90X900_VA_GCR + 0xC) #define GPSELF (0x01 << 1) - #define GPSELC (0x03 << 2) -#define ENKPI (0x02 << 2) -#define ENNAND (0x01 << 2) +#define GPSELD (0x0f << 4) #define GPSELEI0 (0x01 << 26) #define GPSELEI1 (0x01 << 27) @@ -37,11 +35,16 @@ #define GPIOG0TO1 (0x03 << 14) #define GPIOG2TO3 (0x03 << 16) #define GPIOG22TO23 (0x03 << 22) +#define GPIOG18TO20 (0x07 << 18) #define ENSPI (0x0a << 14) #define ENI2C0 (0x01 << 14) #define ENI2C1 (0x01 << 16) #define ENAC97 (0x02 << 22) +#define ENSD1 (0x02 << 18) +#define ENSD0 (0x0a << 4) +#define ENKPI (0x02 << 2) +#define ENNAND (0x01 << 2) static DEFINE_MUTEX(mfp_mutex); @@ -127,16 +130,19 @@ void mfp_set_groupi(struct device *dev) } EXPORT_SYMBOL(mfp_set_groupi); -void mfp_set_groupg(struct device *dev) +void mfp_set_groupg(struct device *dev, const char *subname) { unsigned long mfpen; const char *dev_id; - BUG_ON(!dev); + BUG_ON((!dev) && (!subname)); mutex_lock(&mfp_mutex); - dev_id = dev_name(dev); + if (subname != NULL) + dev_id = subname; + else + dev_id = dev_name(dev); mfpen = __raw_readl(REG_MFSEL); @@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev) } else if (strcmp(dev_id, "nuc900-audio") == 0) { mfpen &= ~(GPIOG22TO23); mfpen |= ENAC97;/*enable AC97*/ + } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) { + mfpen &= ~(GPIOG18TO20); + mfpen |= (ENSD1 | 0x01);/*enable sd1*/ } else { mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/ } @@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev) } EXPORT_SYMBOL(mfp_set_groupg); +void mfp_set_groupd(struct device *dev, const char *subname) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON((!dev) && (!subname)); + + mutex_lock(&mfp_mutex); + + if (subname != NULL) + dev_id = subname; + else + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "nuc900-mmc-port0") == 0) { + mfpen &= ~GPSELD;/*enable sd0*/ + mfpen |= ENSD0; + } else + mfpen &= (~GPSELD); + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupd); -- cgit v0.10.2 From a34dbfb03f472ad3e063d3b1d1e88f7ef8f88bf1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Nov 2011 11:35:58 +0100 Subject: ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list setup_processor copies the arch_name and elf_name fields out of the selected proc_info_list into two fixed size buffers. Since the proc_info_list structure is defined in a proc_*.S assembly file, this can lead to subtle errors if the strings defined there are too long (for example, corrupting the machine ID). This patch uses snprintf instead of sprintf to ensure that these buffers are not overrun. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7e7977a..3448a3f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -461,8 +461,10 @@ static void __init setup_processor(void) cpu_name, read_cpuid_id(), read_cpuid_id() & 15, proc_arch[cpu_architecture()], cr_alignment); - sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); - sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); + snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", + list->arch_name, ENDIANNESS); + snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c", + list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~HWCAP_THUMB; -- cgit v0.10.2 From 4b90a603a1b21d63cf743cc833680cb195a729f6 Mon Sep 17 00:00:00 2001 From: Nick Bowler Date: Thu, 10 Nov 2011 09:01:27 +0000 Subject: ah: Don't return NET_XMIT_DROP on input. When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler Signed-off-by: David S. Miller diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index c7056b2..36d1440 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -369,8 +369,6 @@ static int ah_input(struct xfrm_state *x, struct sk_buff *skb) if (err == -EINPROGRESS) goto out; - if (err == -EBUSY) - err = NET_XMIT_DROP; goto out_free; } diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index 7a33aaa..4c0f894 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -581,8 +581,6 @@ static int ah6_input(struct xfrm_state *x, struct sk_buff *skb) if (err == -EINPROGRESS) goto out; - if (err == -EBUSY) - err = NET_XMIT_DROP; goto out_free; } -- cgit v0.10.2 From 6b76106d8ef31111d6fc469564b83b5f5542794f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 13 Nov 2011 19:58:09 +0100 Subject: block: Always check length of all iov entries in blk_rq_map_user_iov() Even after commit 5478755616ae2ef1ce144dded589b62b2a50d575 ("block: check for proper length of iov entries earlier ...") we still won't check for zero-length entries after an unaligned entry. Remove the break-statement, so all entries are checked. Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe diff --git a/block/blk-map.c b/block/blk-map.c index e663ac2..164cd00 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -204,10 +204,11 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, if (!iov[i].iov_len) return -EINVAL; - if (uaddr & queue_dma_alignment(q)) { + /* + * Keep going so we check length of all segments + */ + if (uaddr & queue_dma_alignment(q)) unaligned = 1; - break; - } } if (unaligned || (q->dma_pad_mask & len) || map_data) -- cgit v0.10.2 From 9ff03b392fa34f6d549fbb56bf05d8a0483aa818 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 13 Nov 2011 07:20:04 +0000 Subject: sparc: sigutil: Include This file introduced in 2.6.32.47 currently fails to compile: arch/sparc/kernel/sigutil_64.c: In function 'save_fpu_state': arch/sparc/kernel/sigutil_64.c:25: error: 'EFAULT' undeclared (first use in this function) Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c index e7dc508..b19570d 100644 --- a/arch/sparc/kernel/sigutil_64.c +++ b/arch/sparc/kernel/sigutil_64.c @@ -2,6 +2,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 3ed90f766dab55fc9d49638a02704becaec379ae Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 14 Nov 2011 00:09:21 -0500 Subject: net/packet: remove dead code and unneeded variable from prb_setup_retire_blk_timer() We test for 'tx_ring' being != zero and BUG() if that's the case. So after that check there is no way that 'tx_ring' could be anything _but_ zero, so testing it again is just dead code. Once that dead code is removed, the 'pkc' local variable becomes entirely redundant, so remove that as well. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 82a6f34..ab10e84 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -516,13 +516,11 @@ static void prb_init_blk_timer(struct packet_sock *po, static void prb_setup_retire_blk_timer(struct packet_sock *po, int tx_ring) { - struct tpacket_kbdq_core *pkc; - if (tx_ring) BUG(); - pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc; - prb_init_blk_timer(po, pkc, prb_retire_rx_blk_timer_expired); + prb_init_blk_timer(po, &po->rx_ring.prb_bdqc, + prb_retire_rx_blk_timer_expired); } static int prb_calc_retire_blk_tmo(struct packet_sock *po, -- cgit v0.10.2 From 77c1c7c4bd4751dbf47cdacd0e73e67f0a1ed316 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 03:36:37 +0000 Subject: rds: drop "select LLIST" Commit 1bc144b625 ("net, rds, Replace xlist in net/rds/xlist.h with llist") added "select LLIST" to the RDS_RDMA Kconfig entry. But there is no Kconfig symbol named LLIST. The select statement for that symbol is a nop. Drop it. lib/llist.o is builtin, so all that's needed to use the llist functionality is to include linux/llist.h, which this commit also did. Signed-off-by: Paul Bolle Signed-off-by: David S. Miller diff --git a/net/rds/Kconfig b/net/rds/Kconfig index 4cf6dc7..ec753b3 100644 --- a/net/rds/Kconfig +++ b/net/rds/Kconfig @@ -9,7 +9,6 @@ config RDS config RDS_RDMA tristate "RDS over Infiniband and iWARP" - select LLIST depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS ---help--- Allow RDS to use Infiniband and iWARP as a transport. -- cgit v0.10.2 From 898bdf2cb43eb0a962c397eb4dd1aec2c7211be2 Mon Sep 17 00:00:00 2001 From: david decotigny Date: Fri, 11 Nov 2011 16:27:34 +0000 Subject: forcedeth: fix stats on hardware without extended stats support This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163b2) - "forcedeth: Improve stats counters" (0bdfea8ba8) - "forcedeth: remove unneeded stats updates" (4687f3f364) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: David Decotigny Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 1dca570..1c61d36 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -609,7 +609,7 @@ struct nv_ethtool_str { }; static const struct nv_ethtool_str nv_estats_str[] = { - { "tx_bytes" }, + { "tx_bytes" }, /* includes Ethernet FCS CRC */ { "tx_zero_rexmt" }, { "tx_one_rexmt" }, { "tx_many_rexmt" }, @@ -637,7 +637,7 @@ static const struct nv_ethtool_str nv_estats_str[] = { /* version 2 stats */ { "tx_deferral" }, { "tx_packets" }, - { "rx_bytes" }, + { "rx_bytes" }, /* includes Ethernet FCS CRC */ { "tx_pause" }, { "rx_pause" }, { "rx_drop_frame" }, @@ -649,7 +649,7 @@ static const struct nv_ethtool_str nv_estats_str[] = { }; struct nv_ethtool_stats { - u64 tx_bytes; + u64 tx_bytes; /* should be ifconfig->tx_bytes + 4*tx_packets */ u64 tx_zero_rexmt; u64 tx_one_rexmt; u64 tx_many_rexmt; @@ -670,14 +670,14 @@ struct nv_ethtool_stats { u64 rx_unicast; u64 rx_multicast; u64 rx_broadcast; - u64 rx_packets; + u64 rx_packets; /* should be ifconfig->rx_packets */ u64 rx_errors_total; u64 tx_errors_total; /* version 2 stats */ u64 tx_deferral; - u64 tx_packets; - u64 rx_bytes; + u64 tx_packets; /* should be ifconfig->tx_packets */ + u64 rx_bytes; /* should be ifconfig->rx_bytes + 4*rx_packets */ u64 tx_pause; u64 rx_pause; u64 rx_drop_frame; @@ -1706,10 +1706,17 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev) if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) { nv_get_hw_stats(dev); + /* + * Note: because HW stats are not always available and + * for consistency reasons, the following ifconfig + * stats are managed by software: rx_bytes, tx_bytes, + * rx_packets and tx_packets. The related hardware + * stats reported by ethtool should be equivalent to + * these ifconfig stats, with 4 additional bytes per + * packet (Ethernet FCS CRC). + */ + /* copy to net_device stats */ - dev->stats.tx_packets = np->estats.tx_packets; - dev->stats.rx_bytes = np->estats.rx_bytes; - dev->stats.tx_bytes = np->estats.tx_bytes; dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors; dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors; dev->stats.rx_crc_errors = np->estats.rx_crc_errors; @@ -2380,6 +2387,9 @@ static int nv_tx_done(struct net_device *dev, int limit) if (flags & NV_TX_ERROR) { if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK)) nv_legacybackoff_reseed(dev); + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += np->get_tx_ctx->skb->len; } dev_kfree_skb_any(np->get_tx_ctx->skb); np->get_tx_ctx->skb = NULL; @@ -2390,6 +2400,9 @@ static int nv_tx_done(struct net_device *dev, int limit) if (flags & NV_TX2_ERROR) { if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK)) nv_legacybackoff_reseed(dev); + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += np->get_tx_ctx->skb->len; } dev_kfree_skb_any(np->get_tx_ctx->skb); np->get_tx_ctx->skb = NULL; @@ -2429,6 +2442,9 @@ static int nv_tx_done_optimized(struct net_device *dev, int limit) else nv_legacybackoff_reseed(dev); } + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += np->get_tx_ctx->skb->len; } dev_kfree_skb_any(np->get_tx_ctx->skb); @@ -2678,6 +2694,7 @@ static int nv_rx_process(struct net_device *dev, int limit) skb->protocol = eth_type_trans(skb, dev); napi_gro_receive(&np->napi, skb); dev->stats.rx_packets++; + dev->stats.rx_bytes += len; next_pkt: if (unlikely(np->get_rx.orig++ == np->last_rx.orig)) np->get_rx.orig = np->first_rx.orig; @@ -2761,6 +2778,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit) } napi_gro_receive(&np->napi, skb); dev->stats.rx_packets++; + dev->stats.rx_bytes += len; } else { dev_kfree_skb(skb); } -- cgit v0.10.2 From 731abb9cb27aef6013ce60808a04e04a545f3f4e Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 10 Nov 2011 15:10:23 +0000 Subject: ip6_tunnel: copy parms.name after register_netdevice Commit 1c5cae815d removed an explicit call to dev_alloc_name in ip6_tnl_create because register_netdevice will now create a valid name. This works for the net_device itself. However the tunnel keeps a copy of the name in the parms structure for the ip6_tnl associated with the tunnel. parms.name is set by copying the net_device name in ip6_tnl_dev_init_gen. That function is called from ip6_tnl_dev_init in ip6_tnl_create, but it is done before register_netdevice is called so the name is set to a bogus value in the parms.name structure. This shows up if you do a simple tunnel add, followed by a tunnel show: [root@localhost ~]# ip -6 tunnel add remote fec0::100 local fec0::200 [root@localhost ~]# ip -6 tunnel show ip6tnl0: ipv6/ipv6 remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) ip6tnl%d: ipv6/ipv6 remote fec0::100 local fec0::200 encaplimit 4 hoplimit 64 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) [root@localhost ~]# Fix this by moving the strcpy out of ip6_tnl_dev_init_gen, and calling it after register_netdevice has successfully returned. Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index bdc15c9..4e2e9ff 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -289,6 +289,8 @@ static struct ip6_tnl *ip6_tnl_create(struct net *net, struct ip6_tnl_parm *p) if ((err = register_netdevice(dev)) < 0) goto failed_free; + strcpy(t->parms.name, dev->name); + dev_hold(dev); ip6_tnl_link(ip6n, t); return t; @@ -1407,7 +1409,6 @@ ip6_tnl_dev_init_gen(struct net_device *dev) struct ip6_tnl *t = netdev_priv(dev); t->dev = dev; - strcpy(t->parms.name, dev->name); dev->tstats = alloc_percpu(struct pcpu_tstats); if (!dev->tstats) return -ENOMEM; @@ -1487,6 +1488,7 @@ static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n) static int __net_init ip6_tnl_init_net(struct net *net) { struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); + struct ip6_tnl *t = NULL; int err; ip6n->tnls[0] = ip6n->tnls_wc; @@ -1507,6 +1509,10 @@ static int __net_init ip6_tnl_init_net(struct net *net) err = register_netdev(ip6n->fb_tnl_dev); if (err < 0) goto err_register; + + t = netdev_priv(ip6n->fb_tnl_dev); + + strcpy(t->parms.name, ip6n->fb_tnl_dev->name); return 0; err_register: -- cgit v0.10.2 From 22f4cb4bd06db14912f69039917422fe0c5b11fb Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 9 Nov 2011 10:47:21 +0800 Subject: ARM: mmp: fix build error on gpio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Parameters of GPIO_REG() should be assigned as volatile. arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_get_value’: arch/arm/plat-pxa/include/plat/gpio.h:12:21: error: invalid operands to binary & (have ‘void *’ and ‘int’) arch/arm/plat-pxa/include/plat/gpio.h: In function ‘gpio_set_value’: arch/arm/plat-pxa/include/plat/gpio.h:21:4: error: lvalue required as left operand of assignment arch/arm/plat-pxa/include/plat/gpio.h:23:4: error: lvalue required as left operand of assignment Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index d14eeaf..99b4ce1 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -7,7 +7,7 @@ #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) #define NR_BUILTIN_GPIO IRQ_GPIO_NUM -- cgit v0.10.2 From ef5e0d8237287db3a12d84f08fb2483d7a30a943 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Thu, 10 Nov 2011 05:48:03 +0000 Subject: bridge: Fix potential deadlock on br->multicast_lock multicast_lock is taken in softirq context, so we should use spin_lock_bh() in userspace. call-chain in softirq context: run_timer_softirq() br_multicast_query_expired() call-chain in userspace: sysfs_write_file() store_multicast_snooping() br_multicast_toggle() Signed-off-by: Andrew Vagin Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 995cbe0..2eefe27 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1770,7 +1770,7 @@ int br_multicast_toggle(struct net_bridge *br, unsigned long val) int err = 0; struct net_bridge_mdb_htable *mdb; - spin_lock(&br->multicast_lock); + spin_lock_bh(&br->multicast_lock); if (br->multicast_disabled == !val) goto unlock; @@ -1806,7 +1806,7 @@ rollback: } unlock: - spin_unlock(&br->multicast_lock); + spin_unlock_bh(&br->multicast_lock); return err; } -- cgit v0.10.2 From 3ac3546e5f17248d961ef0f4a27e75564bf71578 Mon Sep 17 00:00:00 2001 From: Robert Marklund Date: Tue, 25 Oct 2011 22:05:43 +0000 Subject: net/smsc911x: Always wait for the chip to be ready Wait for the chip to be ready before any access to it. On the Snowball platform we need to enable an external regulator before the chip comes online, and then it happens that the device is not yet ready at probe time, so let's wait for it. Signed-off-by: Robert Marklund Signed-off-by: Linus Walleij Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index d2be42a..8843071 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1937,6 +1937,7 @@ static int __devinit smsc911x_init(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); unsigned int byte_test; + unsigned int to = 100; SMSC_TRACE(pdata, probe, "Driver Parameters:"); SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX", @@ -1952,6 +1953,17 @@ static int __devinit smsc911x_init(struct net_device *dev) return -ENODEV; } + /* + * poll the READY bit in PMT_CTRL. Any other access to the device is + * forbidden while this bit isn't set. Try for 100ms + */ + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + udelay(1000); + if (to == 0) { + pr_err("Device not READY in 100ms aborting\n"); + return -ENODEV; + } + /* Check byte ordering */ byte_test = smsc911x_reg_read(pdata, BYTE_TEST); SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test); -- cgit v0.10.2 From 6d74eb9442fb113c97edc88a1c658462db711337 Mon Sep 17 00:00:00 2001 From: Mark Kamichoff Date: Wed, 9 Nov 2011 11:48:10 +0000 Subject: net/usb: Misc. fixes for the LG-VL600 LTE USB modem Add checking for valid magic values (needed for stability in the event corrupted packets are received) and remove some other unneeded checks. Also, fix flagging device as WWAN (Bugzilla bug #39952). Signed-off-by: Mark Kamichoff Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index c924ea2..99ed6eb 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -567,7 +567,7 @@ static const struct usb_device_id products [] = { { USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), - .driver_info = (unsigned long)&wwan_info, + .driver_info = 0, }, /* diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c index d43db32..9c26c63 100644 --- a/drivers/net/usb/lg-vl600.c +++ b/drivers/net/usb/lg-vl600.c @@ -144,10 +144,11 @@ static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } frame = (struct vl600_frame_hdr *) buf->data; - /* NOTE: Should check that frame->magic == 0x53544448? - * Otherwise if we receive garbage at the beginning of the frame - * we may end up allocating a huge buffer and saving all the - * future incoming data into it. */ + /* Yes, check that frame->magic == 0x53544448 (or 0x44544d48), + * otherwise we may run out of memory w/a bad packet */ + if (ntohl(frame->magic) != 0x53544448 && + ntohl(frame->magic) != 0x44544d48) + goto error; if (buf->len < sizeof(*frame) || buf->len != le32_to_cpup(&frame->len)) { @@ -296,6 +297,11 @@ encapsulate: * overwrite the remaining fields. */ packet = (struct vl600_pkt_hdr *) skb->data; + /* The VL600 wants IPv6 packets to have an IPv4 ethertype + * Since this modem only supports IPv4 and IPv6, just set all + * frames to 0x0800 (ETH_P_IP) + */ + packet->h_proto = htons(ETH_P_IP); memset(&packet->dummy, 0, sizeof(packet->dummy)); packet->len = cpu_to_le32(orig_len); @@ -308,21 +314,12 @@ encapsulate: if (skb->len < full_len) /* Pad */ skb_put(skb, full_len - skb->len); - /* The VL600 wants IPv6 packets to have an IPv4 ethertype - * Check if this is an IPv6 packet, and set the ethertype - * to 0x800 - */ - if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) { - skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08; - skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0; - } - return skb; } static const struct driver_info vl600_info = { .description = "LG VL600 modem", - .flags = FLAG_ETHER | FLAG_RX_ASSEMBLE, + .flags = FLAG_RX_ASSEMBLE | FLAG_WWAN, .bind = vl600_bind, .unbind = vl600_unbind, .status = usbnet_cdc_status, -- cgit v0.10.2 From 06236ac3726f15124839cf16a9e2730a852dad9b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Mon, 7 Nov 2011 14:23:11 +0000 Subject: net-netlink: Add a new attribute to expose TCLASS values via netlink MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 3ceca749668a52bd795585e0f71c6f0b04814f7b added a TOS attribute. Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket, furthermore they can have different values. As such one cannot in a sane way expose both through a single attribute. Signed-off-by: Maciej Żenczyowski CC: Murali Raja CC: Stephen Hemminger CC: Eric Dumazet CC: David S. Miller Signed-off-by: David S. Miller diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index 80b480c..abf5028 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -98,9 +98,10 @@ enum { INET_DIAG_VEGASINFO, INET_DIAG_CONG, INET_DIAG_TOS, + INET_DIAG_TCLASS, }; -#define INET_DIAG_MAX INET_DIAG_TOS +#define INET_DIAG_MAX INET_DIAG_TCLASS /* INET_DIAG_MEM */ diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index f5e2bda..68e8ac5 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -133,8 +133,8 @@ static int inet_csk_diag_fill(struct sock *sk, &np->rcv_saddr); ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst, &np->daddr); - if (ext & (1 << (INET_DIAG_TOS - 1))) - RTA_PUT_U8(skb, INET_DIAG_TOS, np->tclass); + if (ext & (1 << (INET_DIAG_TCLASS - 1))) + RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass); } #endif -- cgit v0.10.2 From edb0a6408a84b4f14647770d8a6796afff3e93a9 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 1 Aug 2011 17:53:21 +0800 Subject: Blackfin: add serial TX IRQ in individual platform resource The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Bob Liu diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 7fd0ec7..ecacdf3 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -32,6 +32,8 @@ struct work_struct; struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int tx_irq; + int rx_irq; int status_irq; #ifndef BFIN_UART_BF54X_STYLE unsigned int lsr; diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 1082e49..d1c0c0c 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -373,8 +373,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -416,8 +421,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 55c1279..5470bf8 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -309,8 +309,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -352,8 +357,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index 8d65d47..5bc6938 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -381,8 +381,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -424,8 +429,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 6410fc1..c13065b 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -539,8 +539,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -582,8 +587,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 64f7278..2963c35 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -417,8 +417,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -460,8 +465,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index e4c6a12..3ecafff 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -711,8 +711,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -754,8 +759,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 76dbc03..3a92c43 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -496,8 +496,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -540,8 +545,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 5da5787..47cadd3 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -238,8 +238,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index b0ec825..18817d5 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -193,8 +193,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 14f54a3..2c8f30e 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -221,8 +221,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index ecd2801..144556e 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -292,8 +292,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index fbee77f..b597d4e 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -151,8 +151,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 964a8e5..2afd02e 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -298,8 +298,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX + 1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 1471c51..82e4cc3 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -305,8 +305,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -366,8 +371,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 47cf37d..e9f1964 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -306,8 +306,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -349,8 +354,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 33e69e4..5b22598 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -237,8 +237,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -281,8 +286,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index c62f9dc..3901dd0 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -240,8 +240,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -283,8 +288,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 3099e91..1567dd8 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -309,8 +309,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -352,8 +357,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 27f955d..bff551a 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1566,8 +1566,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -1621,8 +1626,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 8418030..e58c9bc 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -306,8 +306,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -349,8 +354,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 629f3c3..8356eb5 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -49,8 +49,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -104,8 +109,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { @@ -147,8 +157,13 @@ static struct resource bfin_uart2_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART2_TX, + .end = IRQ_UART2_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART2_RX, - .end = IRQ_UART2_RX+1, + .end = IRQ_UART2_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 212b9e0..0350eac 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -135,8 +135,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -178,8 +183,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { @@ -237,8 +247,13 @@ static struct resource bfin_uart2_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART2_TX, + .end = IRQ_UART2_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART2_RX, - .end = IRQ_UART2_RX+1, + .end = IRQ_UART2_RX, .flags = IORESOURCE_IRQ, }, { @@ -280,8 +295,13 @@ static struct resource bfin_uart3_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART3_TX, + .end = IRQ_UART3_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART3_RX, - .end = IRQ_UART3_RX+1, + .end = IRQ_UART3_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index cd9cbb6..bb868ac 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -241,8 +241,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -284,8 +289,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { @@ -343,8 +353,13 @@ static struct resource bfin_uart2_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART2_TX, + .end = IRQ_UART2_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART2_RX, - .end = IRQ_UART2_RX+1, + .end = IRQ_UART2_RX, .flags = IORESOURCE_IRQ, }, { @@ -386,8 +401,13 @@ static struct resource bfin_uart3_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART3_TX, + .end = IRQ_UART3_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART3_RX, - .end = IRQ_UART3_RX+1, + .end = IRQ_UART3_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 972e134..b1b7339 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -203,8 +203,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART_RX, - .end = IRQ_UART_RX + 1, + .end = IRQ_UART_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c1b72f2..c017cf0 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -277,8 +277,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART_RX, - .end = IRQ_UART_RX+1, + .end = IRQ_UART_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 9490dc8..27f22ed 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -172,8 +172,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART_RX, - .end = IRQ_UART_RX+1, + .end = IRQ_UART_RX, .flags = IORESOURCE_IRQ, }, { diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index bb056e6..1a57bc9 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -51,8 +51,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART_RX, - .end = IRQ_UART_RX+1, + .end = IRQ_UART_RX, .flags = IORESOURCE_IRQ, }, { -- cgit v0.10.2 From 905905432868fa513f0f783fb9e5724536f4ee1f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 11 Nov 2011 11:06:38 +0100 Subject: blackfin: Fixup export.h includes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 8dc7a9c84 ("blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into sections protected by an unrelated #if CONFIG_... statement. This can cause, depending on the configuration used, warnings like this one: arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration This patch fixes it by moving the includes out of the #if protected sections. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Bob Liu diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index c13065b..cd28969 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -811,7 +812,6 @@ static struct platform_device bfin_sport1_uart_device = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include -#include static struct gpio_keys_button bfin_gpio_keys_table[] = { {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 2963c35..9f792ea 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -684,7 +685,6 @@ static struct platform_device bfin_sport1_uart_device = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include -#include static struct gpio_keys_button bfin_gpio_keys_table[] = { {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 82e4cc3..604a430 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -579,7 +580,6 @@ static struct platform_device bfin_sport1_uart_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #include -#include static const unsigned short bfin_mac_peripherals[] = P_MII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index e9f1964..d916b46 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -544,7 +545,6 @@ static struct platform_device bfin_sport1_uart_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #include -#include static const unsigned short bfin_mac_peripherals[] = P_MII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 5b22598..5f30722 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -12,6 +12,7 @@ */ #include +#include #include #include #include @@ -49,7 +50,6 @@ static struct platform_device rtc_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #include -#include static const unsigned short bfin_mac_peripherals[] = P_RMII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 1567dd8..aebd31c 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index bff551a..7fbb0bb 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -2002,7 +2003,6 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) #include -#include static struct led_info adp8860_leds[] = { { .name = "adp8860-led7", diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index e58c9bc..6917ce2 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -546,7 +547,6 @@ static struct platform_device bfin_sport1_uart_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #include -#include static const unsigned short bfin_mac_peripherals[] = P_MII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { -- cgit v0.10.2 From d53dab3ae1a3c6b438738c3792c98ac63f0061f4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 23 Jul 2011 12:45:07 +0200 Subject: drm: Remove utterly bogus preempt_disable() sections commit 27641c3f (drm/vblank: Add support for precise vblank timestamping) adds preempt_disable()/enable() around a spin locked section with the comments: * Disable preemption, so vblank_time_lock is held as short as * possible, even under a kernel with PREEMPT_RT patches. /* Disable preemption while holding vblank_time_lock. Do * it explicitely to guard against PREEMPT_RT kernel. Just that this has never been tested on a RT kernel which would have granted that nonsense with a might_sleep() warning because dev->vblank_time_lock is converted to a "sleeping" spinlock on RT. So this is activly wrong on RT and superflous on mainline. Remove it. Signed-off-by: Thomas Gleixner Acked-by: Mario Kleiner Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 68b7562..44a5d0a 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -110,10 +110,7 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) /* Prevent vblank irq processing while disabling vblank irqs, * so no updates of timestamps or count can happen after we've * disabled. Needed to prevent races in case of delayed irq's. - * Disable preemption, so vblank_time_lock is held as short as - * possible, even under a kernel with PREEMPT_RT patches. */ - preempt_disable(); spin_lock_irqsave(&dev->vblank_time_lock, irqflags); dev->driver->disable_vblank(dev, crtc); @@ -164,7 +161,6 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) clear_vblank_timestamps(dev, crtc); spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags); - preempt_enable(); } static void vblank_disable_fn(unsigned long arg) @@ -889,10 +885,6 @@ int drm_vblank_get(struct drm_device *dev, int crtc) spin_lock_irqsave(&dev->vbl_lock, irqflags); /* Going from 0->1 means we have to enable interrupts again */ if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) { - /* Disable preemption while holding vblank_time_lock. Do - * it explicitely to guard against PREEMPT_RT kernel. - */ - preempt_disable(); spin_lock_irqsave(&dev->vblank_time_lock, irqflags2); if (!dev->vblank_enabled[crtc]) { /* Enable vblank irqs under vblank_time_lock protection. @@ -912,7 +904,6 @@ int drm_vblank_get(struct drm_device *dev, int crtc) } } spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2); - preempt_enable(); } else { if (!dev->vblank_enabled[crtc]) { atomic_dec(&dev->vblank_refcount[crtc]); -- cgit v0.10.2 From e53de8f00c80fd1a312c95bc5157fdb98d46e070 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 13 Nov 2011 23:11:50 +0100 Subject: ALSA: hda/realtek: remove redundant semicolon Having just one semicolon after a break statement is enough. Signed-off-by: Jesper Juhl Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 308bb57..336d14e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1452,7 +1452,7 @@ static void alc_apply_fixup(struct hda_codec *codec, int action) switch (fix->type) { case ALC_FIXUP_SKU: if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku) - break;; + break; snd_printdd(KERN_INFO "hda_codec: %s: " "Apply sku override for %s\n", codec->chip_name, modelname); -- cgit v0.10.2 From f6252114cbb7edabc1c92bf794153922ee0ea46d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 10 Oct 2011 09:29:18 +0100 Subject: vgaarb: a NULL bridge is acceptable for root devices. I assumed all PCI buses had a bridge, but playing with qemu recently, I discovered vgaarb bug where it wasn't detecting both devices shared a bridge at the root level. Don't check for NULL, if two buses have a NULL bridge, assume they share the root bus. Acked-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index c72f1c0..bdde899 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -465,31 +465,29 @@ static void vga_arbiter_check_bridge_sharing(struct vga_device *vgadev) while (new_bus) { new_bridge = new_bus->self; - if (new_bridge) { - /* go through list of devices already registered */ - list_for_each_entry(same_bridge_vgadev, &vga_list, list) { - bus = same_bridge_vgadev->pdev->bus; - bridge = bus->self; - - /* see if the share a bridge with this device */ - if (new_bridge == bridge) { - /* if their direct parent bridge is the same - as any bridge of this device then it can't be used - for that device */ - same_bridge_vgadev->bridge_has_one_vga = false; - } + /* go through list of devices already registered */ + list_for_each_entry(same_bridge_vgadev, &vga_list, list) { + bus = same_bridge_vgadev->pdev->bus; + bridge = bus->self; + + /* see if the share a bridge with this device */ + if (new_bridge == bridge) { + /* if their direct parent bridge is the same + as any bridge of this device then it can't be used + for that device */ + same_bridge_vgadev->bridge_has_one_vga = false; + } - /* now iterate the previous devices bridge hierarchy */ - /* if the new devices parent bridge is in the other devices - hierarchy then we can't use it to control this device */ - while (bus) { - bridge = bus->self; - if (bridge) { - if (bridge == vgadev->pdev->bus->self) - vgadev->bridge_has_one_vga = false; - } - bus = bus->parent; + /* now iterate the previous devices bridge hierarchy */ + /* if the new devices parent bridge is in the other devices + hierarchy then we can't use it to control this device */ + while (bus) { + bridge = bus->self; + if (bridge) { + if (bridge == vgadev->pdev->bus->self) + vgadev->bridge_has_one_vga = false; } + bus = bus->parent; } } new_bus = new_bus->parent; -- cgit v0.10.2 From 800252976be89611ef86d6d04442a821018ed949 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 14 Nov 2011 11:18:59 +0100 Subject: [S390] wire up process_vm syscalls Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index 404bdb96..58de4c9 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -277,7 +277,9 @@ #define __NR_clock_adjtime 337 #define __NR_syncfs 338 #define __NR_setns 339 -#define NR_syscalls 340 +#define __NR_process_vm_readv 340 +#define __NR_process_vm_writev 341 +#define NR_syscalls 342 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 5006a1d..18c51df 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1627,3 +1627,23 @@ ENTRY(sys_setns_wrapper) lgfr %r2,%r2 # int lgfr %r3,%r3 # int jg sys_setns + +ENTRY(compat_sys_process_vm_readv_wrapper) + lgfr %r2,%r2 # compat_pid_t + llgtr %r3,%r3 # struct compat_iovec __user * + llgfr %r4,%r4 # unsigned long + llgtr %r5,%r5 # struct compat_iovec __user * + llgfr %r6,%r6 # unsigned long + llgf %r0,164(%r15) # unsigned long + stg %r0,160(%r15) + jg sys_process_vm_readv + +ENTRY(compat_sys_process_vm_writev_wrapper) + lgfr %r2,%r2 # compat_pid_t + llgtr %r3,%r3 # struct compat_iovec __user * + llgfr %r4,%r4 # unsigned long + llgtr %r5,%r5 # struct compat_iovec __user * + llgfr %r6,%r6 # unsigned long + llgf %r0,164(%r15) # unsigned long + stg %r0,160(%r15) + jg sys_process_vm_writev diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 73eb08c..bcab2f0 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -348,3 +348,5 @@ SYSCALL(sys_open_by_handle_at,sys_open_by_handle_at,compat_sys_open_by_handle_at SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper) SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper) SYSCALL(sys_setns,sys_setns,sys_setns_wrapper) +SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */ +SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper) -- cgit v0.10.2 From 09b538833b85521d937a06faf61e6a3273253cc0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 14 Nov 2011 11:19:00 +0100 Subject: [S390] fix pgste update logic The pgste_update_all / pgste_update_young and pgste_set_pte need to check if the pte entry contains a valid page address before the storage key can be accessed. In addition pgste_set_pte needs to set the access key and fetch protection bit of the new pte entry, not the old entry. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 34ede0e..524d23b 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -593,6 +593,8 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) unsigned long address, bits; unsigned char skey; + if (!pte_present(*ptep)) + return pgste; address = pte_val(*ptep) & PAGE_MASK; skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); @@ -625,6 +627,8 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) #ifdef CONFIG_PGSTE int young; + if (!pte_present(*ptep)) + return pgste; young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); /* Transfer page referenced bit to pte software bit (host view) */ if (young || (pgste_val(pgste) & RCP_HR_BIT)) @@ -638,13 +642,15 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) } -static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) +static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry) { #ifdef CONFIG_PGSTE unsigned long address; unsigned long okey, nkey; - address = pte_val(*ptep) & PAGE_MASK; + if (!pte_present(entry)) + return; + address = pte_val(entry) & PAGE_MASK; okey = nkey = page_get_storage_key(address); nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); /* Set page access key and fetch protection bit from pgste */ @@ -712,7 +718,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, if (mm_has_pgste(mm)) { pgste = pgste_get_lock(ptep); - pgste_set_pte(ptep, pgste); + pgste_set_pte(ptep, pgste, entry); *ptep = entry; pgste_set_unlock(ptep, pgste); } else -- cgit v0.10.2 From fa2fb2f4a599c402bb2670dde27867dbbb7e3c45 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 14 Nov 2011 11:19:01 +0100 Subject: [S390] pfault: ignore leftover completion interrupts Ignore completion interrupts if the initial interrupt hasn't been received and the addressed task is not running. This case can only happen if leftover (pending) completion interrupt gets delivered which wasn't removed with the PFAULT CANCEL operation during cpu hotplug. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 1766def..a9a3018 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -587,8 +587,13 @@ static void pfault_interrupt(unsigned int ext_int_code, } else { /* Completion interrupt was faster than initial * interrupt. Set pfault_wait to -1 so the initial - * interrupt doesn't put the task to sleep. */ - tsk->thread.pfault_wait = -1; + * interrupt doesn't put the task to sleep. + * If the task is not running, ignore the completion + * interrupt since it must be a leftover of a PFAULT + * CANCEL operation which didn't remove all pending + * completion interrupts. */ + if (tsk->state == TASK_RUNNING) + tsk->thread.pfault_wait = -1; } put_task_struct(tsk); } else { -- cgit v0.10.2 From 7a2512b744e72377c3fa5976f06a3f343e155d1f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 14 Nov 2011 11:19:02 +0100 Subject: [S390] incorrect note program header 'readelf -n' on the s390 vmlinux file generates lots of warnings about corrupt notes. The reason is that the 'NOTE' program header has incorrect file and memory sizes. The problem is that the section following the NOTES section do not switch to a different phdr and they get added to the NOTE program section. Add a dummy entry to the linker script that switches to the data phdr before the start of the RODATA section. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 56fe6bc..e4c79eb 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -43,6 +43,8 @@ SECTIONS NOTES :text :note + .dummy : { *(.dummy) } :data + RODATA #ifdef CONFIG_SHARED_KERNEL -- cgit v0.10.2 From 96603b505cb6c54782a27599afef65cc108ef5f2 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 14 Nov 2011 11:19:03 +0100 Subject: [S390] Kconfig: Select CONFIG_KEXEC for CONFIG_CRASH_DUMP The kdump infrastructure is built on top of kexec. Therefore CONFIG_KEXEC has to be enabled when CONFIG_CRASH_DUMP is selected. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index a9fbd43..373679b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -572,6 +572,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps" depends on 64BIT + select KEXEC help Generate crash dump after being started by kexec. Crash dump kernels are loaded in the main kernel with kexec-tools -- cgit v0.10.2 From bc615deaf35ab06e7fe5672b0efb3c7a0b2dcf1a Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Mon, 14 Nov 2011 11:19:04 +0100 Subject: [S390] ap: Setup processing for messages in request queue. Setup timer for processing messages in request queue, if sending an AP message returns with reason code AP_RESPONSE_RESET_IN_PROGRESS. Signed-off-by: Holger Dengler Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index b77ae51..ec94f04 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1271,18 +1271,16 @@ ap_config_timeout(unsigned long ptr) } /** - * ap_schedule_poll_timer(): Schedule poll timer. + * __ap_schedule_poll_timer(): Schedule poll timer. * * Set up the timer to run the poll tasklet */ -static inline void ap_schedule_poll_timer(void) +static inline void __ap_schedule_poll_timer(void) { ktime_t hr_time; spin_lock_bh(&ap_poll_timer_lock); - if (ap_using_interrupts() || ap_suspend_flag) - goto out; - if (hrtimer_is_queued(&ap_poll_timer)) + if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag) goto out; if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) { hr_time = ktime_set(0, poll_timeout); @@ -1294,6 +1292,18 @@ out: } /** + * ap_schedule_poll_timer(): Schedule poll timer. + * + * Set up the timer to run the poll tasklet + */ +static inline void ap_schedule_poll_timer(void) +{ + if (ap_using_interrupts()) + return; + __ap_schedule_poll_timer(); +} + +/** * ap_poll_read(): Receive pending reply messages from an AP device. * @ap_dev: pointer to the AP device * @flags: pointer to control flags, bit 2^0 is set if another poll is @@ -1374,8 +1384,9 @@ static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags) *flags |= 1; *flags |= 2; break; - case AP_RESPONSE_Q_FULL: case AP_RESPONSE_RESET_IN_PROGRESS: + __ap_schedule_poll_timer(); + case AP_RESPONSE_Q_FULL: *flags |= 2; break; case AP_RESPONSE_MESSAGE_TOO_BIG: -- cgit v0.10.2 From 3f25dc4fcbc371f86a61a6af759003ebd4965908 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 14 Nov 2011 11:19:05 +0100 Subject: [S390] zfcpdump: Do not initialize zfcpdump in kdump mode When the kernel is started in kdump mode, zfcpdump should not be initialized because both dump methods can't be used at the same time. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 8ac6bfa..e58a462 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -211,6 +211,8 @@ static void __init setup_zfcpdump(unsigned int console_devno) if (ipl_info.type != IPL_TYPE_FCP_DUMP) return; + if (OLDMEM_BASE) + return; if (console_devno != -1) sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x", ipl_info.data.fcp.dev_id.devno, console_devno); @@ -482,7 +484,7 @@ static void __init setup_memory_end(void) #ifdef CONFIG_ZFCPDUMP - if (ipl_info.type == IPL_TYPE_FCP_DUMP) { + if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) { memory_end = ZFCPDUMP_HSA_SIZE; memory_end_set = 1; } diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c index 43068fb..1b6d924 100644 --- a/drivers/s390/char/zcore.c +++ b/drivers/s390/char/zcore.c @@ -641,6 +641,8 @@ static int __init zcore_init(void) if (ipl_info.type != IPL_TYPE_FCP_DUMP) return -ENODATA; + if (OLDMEM_BASE) + return -ENODATA; zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long)); debug_register_view(zcore_dbf, &debug_sprintf_view); -- cgit v0.10.2 From cfa1e7e1d49c6f5f0b00b2cb890b521e5c0dc7ea Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 14 Nov 2011 11:19:06 +0100 Subject: [S390] avoid STCKF if running in ESA mode In ESA mode STCKF is not defined even if the facility bit is enabled. To prevent an illegal operation we must also check if we run a 64 bit kernel. To make the check perform well add the STCKF bit to the machine flags. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index 5a09971..097183c 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -82,6 +82,7 @@ extern unsigned int user_mode; #define MACHINE_FLAG_LPAR (1UL << 12) #define MACHINE_FLAG_SPP (1UL << 13) #define MACHINE_FLAG_TOPOLOGY (1UL << 14) +#define MACHINE_FLAG_STCKF (1UL << 15) #define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) @@ -100,6 +101,7 @@ extern unsigned int user_mode; #define MACHINE_HAS_PFMF (0) #define MACHINE_HAS_SPP (0) #define MACHINE_HAS_TOPOLOGY (0) +#define MACHINE_HAS_STCKF (0) #else /* __s390x__ */ #define MACHINE_HAS_IEEE (1) #define MACHINE_HAS_CSP (1) @@ -111,6 +113,7 @@ extern unsigned int user_mode; #define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF) #define MACHINE_HAS_SPP (S390_lowcore.machine_flags & MACHINE_FLAG_SPP) #define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY) +#define MACHINE_HAS_STCKF (S390_lowcore.machine_flags & MACHINE_FLAG_STCKF) #endif /* __s390x__ */ #define ZFCPDUMP_HSA_SIZE (32UL<<20) diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index d610bef..c447a27 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -90,7 +90,7 @@ static inline unsigned long long get_clock_fast(void) { unsigned long long clk; - if (test_facility(25)) + if (MACHINE_HAS_STCKF) asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc"); else clk = get_clock(); diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 37394b3..c9ffe00 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -390,6 +390,8 @@ static __init void detect_machine_facilities(void) S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS; if (test_facility(40)) S390_lowcore.machine_flags |= MACHINE_FLAG_SPP; + if (test_facility(25)) + S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF; #endif } -- cgit v0.10.2 From 6ed54387dc470fc439cb154724a1ac81d251c126 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 14 Nov 2011 11:19:07 +0100 Subject: [S390] crypto: avoid MSA3 and MSA4 instructions in ESA mode MSA3 and MSA4 instructions are only available under CONFIG_64BIT. Bail out before using any of these instructions if the kernel is running in 31 bit mode. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h index 4967677..ffd1ac2 100644 --- a/arch/s390/crypto/crypt_s390.h +++ b/arch/s390/crypto/crypt_s390.h @@ -368,9 +368,12 @@ static inline int crypt_s390_func_available(int func, if (facility_mask & CRYPT_S390_MSA && !test_facility(17)) return 0; - if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76)) + + if (facility_mask & CRYPT_S390_MSA3 && + (!test_facility(2) || !test_facility(76))) return 0; - if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77)) + if (facility_mask & CRYPT_S390_MSA4 && + (!test_facility(2) || !test_facility(77))) return 0; switch (func & CRYPT_S390_OP_MASK) { -- cgit v0.10.2 From f6bf1a8acd2cb3a92a7b7c9ab03e56a32ac5ece5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 14 Nov 2011 11:19:08 +0100 Subject: [S390] topology: fix topology on z10 machines Make sure that all cpus in a book on a z10 appear as book siblings and not as core siblings. This fixes some performance regressions that appeared after the book scheduling domain got introduced. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 77b8942..fdb5b8c 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -68,8 +68,10 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) return mask; } -static void add_cpus_to_mask(struct topology_cpu *tl_cpu, - struct mask_info *book, struct mask_info *core) +static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu, + struct mask_info *book, + struct mask_info *core, + int z10) { unsigned int cpu; @@ -88,10 +90,16 @@ static void add_cpus_to_mask(struct topology_cpu *tl_cpu, cpu_book_id[lcpu] = book->id; #endif cpumask_set_cpu(lcpu, &core->mask); - cpu_core_id[lcpu] = core->id; + if (z10) { + cpu_core_id[lcpu] = rcpu; + core = core->next; + } else { + cpu_core_id[lcpu] = core->id; + } smp_cpu_polarization[lcpu] = tl_cpu->pp; } } + return core; } static void clear_masks(void) @@ -123,18 +131,41 @@ static void tl_to_cores(struct sysinfo_15_1_x *info) { #ifdef CONFIG_SCHED_BOOK struct mask_info *book = &book_info; + struct cpuid cpu_id; #else struct mask_info *book = NULL; #endif struct mask_info *core = &core_info; union topology_entry *tle, *end; + int z10 = 0; - +#ifdef CONFIG_SCHED_BOOK + get_cpu_id(&cpu_id); + z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098; +#endif spin_lock_irq(&topology_lock); clear_masks(); tle = info->tle; end = (union topology_entry *)((unsigned long)info + info->length); while (tle < end) { +#ifdef CONFIG_SCHED_BOOK + if (z10) { + switch (tle->nl) { + case 1: + book = book->next; + book->id = tle->container.id; + break; + case 0: + core = add_cpus_to_mask(&tle->cpu, book, core, z10); + break; + default: + clear_masks(); + goto out; + } + tle = next_tle(tle); + continue; + } +#endif switch (tle->nl) { #ifdef CONFIG_SCHED_BOOK case 2: @@ -147,7 +178,7 @@ static void tl_to_cores(struct sysinfo_15_1_x *info) core->id = tle->container.id; break; case 0: - add_cpus_to_mask(&tle->cpu, book, core); + add_cpus_to_mask(&tle->cpu, book, core, z10); break; default: clear_masks(); @@ -328,8 +359,8 @@ void __init s390_init_cpu_topology(void) for (i = 0; i < TOPOLOGY_NR_MAG; i++) printk(" %d", info->mag[i]); printk(" / %d\n", info->mnest); - alloc_masks(info, &core_info, 2); + alloc_masks(info, &core_info, 1); #ifdef CONFIG_SCHED_BOOK - alloc_masks(info, &book_info, 3); + alloc_masks(info, &book_info, 2); #endif } -- cgit v0.10.2 From cf5f0acf3935c91379e709a71ecf68805d366659 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Oct 2011 16:52:28 +0200 Subject: sched: Add a comment to effective_load() since it's a pain Every time I have to stare at this function I need to completely reverse engineer its workings, about time I write a comment explaining the thing. Collected bits and pieces from previous changelogs, mostly: 4be9daaa1b33701f011f4117f22dc1e45a3e6e34 83378269a5fad98f562ebc0f09c349575e6cbfe1 Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1318518057.27731.2.camel@twins Signed-off-by: Ingo Molnar diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5c9e679..aba20f4 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -772,19 +772,32 @@ static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update) list_del_leaf_cfs_rq(cfs_rq); } +static inline long calc_tg_weight(struct task_group *tg, struct cfs_rq *cfs_rq) +{ + long tg_weight; + + /* + * Use this CPU's actual weight instead of the last load_contribution + * to gain a more accurate current total weight. See + * update_cfs_rq_load_contribution(). + */ + tg_weight = atomic_read(&tg->load_weight); + tg_weight -= cfs_rq->load_contribution; + tg_weight += cfs_rq->load.weight; + + return tg_weight; +} + static long calc_cfs_shares(struct cfs_rq *cfs_rq, struct task_group *tg) { - long load_weight, load, shares; + long tg_weight, load, shares; + tg_weight = calc_tg_weight(tg, cfs_rq); load = cfs_rq->load.weight; - load_weight = atomic_read(&tg->load_weight); - load_weight += load; - load_weight -= cfs_rq->load_contribution; - shares = (tg->shares * load); - if (load_weight) - shares /= load_weight; + if (tg_weight) + shares /= tg_weight; if (shares < MIN_SHARES) shares = MIN_SHARES; @@ -2036,36 +2049,100 @@ static void task_waking_fair(struct task_struct *p) * Adding load to a group doesn't make a group heavier, but can cause movement * of group shares between cpus. Assuming the shares were perfectly aligned one * can calculate the shift in shares. + * + * Calculate the effective load difference if @wl is added (subtracted) to @tg + * on this @cpu and results in a total addition (subtraction) of @wg to the + * total group weight. + * + * Given a runqueue weight distribution (rw_i) we can compute a shares + * distribution (s_i) using: + * + * s_i = rw_i / \Sum rw_j (1) + * + * Suppose we have 4 CPUs and our @tg is a direct child of the root group and + * has 7 equal weight tasks, distributed as below (rw_i), with the resulting + * shares distribution (s_i): + * + * rw_i = { 2, 4, 1, 0 } + * s_i = { 2/7, 4/7, 1/7, 0 } + * + * As per wake_affine() we're interested in the load of two CPUs (the CPU the + * task used to run on and the CPU the waker is running on), we need to + * compute the effect of waking a task on either CPU and, in case of a sync + * wakeup, compute the effect of the current task going to sleep. + * + * So for a change of @wl to the local @cpu with an overall group weight change + * of @wl we can compute the new shares distribution (s'_i) using: + * + * s'_i = (rw_i + @wl) / (@wg + \Sum rw_j) (2) + * + * Suppose we're interested in CPUs 0 and 1, and want to compute the load + * differences in waking a task to CPU 0. The additional task changes the + * weight and shares distributions like: + * + * rw'_i = { 3, 4, 1, 0 } + * s'_i = { 3/8, 4/8, 1/8, 0 } + * + * We can then compute the difference in effective weight by using: + * + * dw_i = S * (s'_i - s_i) (3) + * + * Where 'S' is the group weight as seen by its parent. + * + * Therefore the effective change in loads on CPU 0 would be 5/56 (3/8 - 2/7) + * times the weight of the group. The effect on CPU 1 would be -4/56 (4/8 - + * 4/7) times the weight of the group. */ static long effective_load(struct task_group *tg, int cpu, long wl, long wg) { struct sched_entity *se = tg->se[cpu]; - if (!tg->parent) + if (!tg->parent) /* the trivial, non-cgroup case */ return wl; for_each_sched_entity(se) { - long lw, w; + long w, W; tg = se->my_q->tg; - w = se->my_q->load.weight; - /* use this cpu's instantaneous contribution */ - lw = atomic_read(&tg->load_weight); - lw -= se->my_q->load_contribution; - lw += w + wg; + /* + * W = @wg + \Sum rw_j + */ + W = wg + calc_tg_weight(tg, se->my_q); - wl += w; + /* + * w = rw_i + @wl + */ + w = se->my_q->load.weight + wl; - if (lw > 0 && wl < lw) - wl = (wl * tg->shares) / lw; + /* + * wl = S * s'_i; see (2) + */ + if (W > 0 && w < W) + wl = (w * tg->shares) / W; else wl = tg->shares; - /* zero point is MIN_SHARES */ + /* + * Per the above, wl is the new se->load.weight value; since + * those are clipped to [MIN_SHARES, ...) do so now. See + * calc_cfs_shares(). + */ if (wl < MIN_SHARES) wl = MIN_SHARES; + + /* + * wl = dw_i = S * (s'_i - s_i); see (3) + */ wl -= se->load.weight; + + /* + * Recursively apply this logic to all parent groups to compute + * the final effective load change on the root group. Since + * only the @tg group gets extra weight, all parent groups can + * only redistribute existing shares. @wl is the shift in shares + * resulting from this level per the above. + */ wg = 0; } -- cgit v0.10.2 From 461819ac8ee950ce027c72a066156a3df9e60c7e Mon Sep 17 00:00:00 2001 From: Hui Kang Date: Tue, 11 Oct 2011 23:00:59 -0400 Subject: sched_fair: Fix a typo in the comment describing update_sd_lb_stats Signed-off-by: Hui Kang Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1318388459-4427-1-git-send-email-hkang.sunysb@gmail.com Signed-off-by: Ingo Molnar diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index aba20f4..7e51b5b 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -3588,7 +3588,7 @@ static bool update_sd_pick_busiest(struct sched_domain *sd, } /** - * update_sd_lb_stats - Update sched_group's statistics for load balancing. + * update_sd_lb_stats - Update sched_domain's statistics for load balancing. * @sd: sched_domain whose statistics are to be updated. * @this_cpu: Cpu for which load balance is currently performed. * @idle: Idle status of this_cpu -- cgit v0.10.2 From c6dc7f055d333ef35f397b8d7c3abcd1918bf8cb Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 6 Oct 2011 15:22:46 -0400 Subject: sched: Document wait_for_completion_*() return values The return-value convention for these functions varies depending on whether they're interruptible or can timeout. It can be a little confusing--document it. Signed-off-by: J. Bruce Fields Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111006192246.GB28026@fieldses.org Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 0e9344a..3d2c436 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4810,6 +4810,9 @@ EXPORT_SYMBOL(wait_for_completion); * This waits for either a completion of a specific task to be signaled or for a * specified timeout to expire. The timeout is in jiffies. It is not * interruptible. + * + * The return value is 0 if timed out, and positive (at least 1, or number of + * jiffies left till timeout) if completed. */ unsigned long __sched wait_for_completion_timeout(struct completion *x, unsigned long timeout) @@ -4824,6 +4827,8 @@ EXPORT_SYMBOL(wait_for_completion_timeout); * * This waits for completion of a specific task to be signaled. It is * interruptible. + * + * The return value is -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_interruptible(struct completion *x) { @@ -4841,6 +4846,9 @@ EXPORT_SYMBOL(wait_for_completion_interruptible); * * This waits for either a completion of a specific task to be signaled or for a * specified timeout to expire. It is interruptible. The timeout is in jiffies. + * + * The return value is -ERESTARTSYS if interrupted, 0 if timed out, + * positive (at least 1, or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_interruptible_timeout(struct completion *x, @@ -4856,6 +4864,8 @@ EXPORT_SYMBOL(wait_for_completion_interruptible_timeout); * * This waits to be signaled for completion of a specific task. It can be * interrupted by a kill signal. + * + * The return value is -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_killable(struct completion *x) { @@ -4874,6 +4884,9 @@ EXPORT_SYMBOL(wait_for_completion_killable); * This waits for either a completion of a specific task to be * signaled or for a specified timeout to expire. It can be * interrupted by a kill signal. The timeout is in jiffies. + * + * The return value is -ERESTARTSYS if interrupted, 0 if timed out, + * positive (at least 1, or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_killable_timeout(struct completion *x, -- cgit v0.10.2 From 4a6184ce7a48c478dee0d8a9ed74c1fa35161858 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 6 Oct 2011 22:39:14 +0200 Subject: sched, rt: Provide means of disabling cross-cpu bandwidth sharing Normally the RT bandwidth scheme will share bandwidth across the entire root_domain. However sometimes its convenient to disable this sharing for debug purposes. Provide a simple feature switch to this end. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched_features.h b/kernel/sched_features.h index efa0a7b..8480224 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -67,3 +67,4 @@ SCHED_FEAT(NONTASK_POWER, 1) SCHED_FEAT(TTWU_QUEUE, 1) SCHED_FEAT(FORCE_SD_OVERLAP, 0) +SCHED_FEAT(RT_RUNTIME_SHARE, 1) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 056cbd2..583a136 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -560,6 +560,9 @@ static int balance_runtime(struct rt_rq *rt_rq) { int more = 0; + if (!sched_feat(RT_RUNTIME_SHARE)) + return more; + if (rt_rq->rt_time > rt_rq->rt_runtime) { raw_spin_unlock(&rt_rq->rt_runtime_lock); more = do_balance_runtime(rt_rq); -- cgit v0.10.2 From f1c6f1a7eed963ed233ba4c8b6fa8addb86c6ddc Mon Sep 17 00:00:00 2001 From: Carsten Emde Date: Wed, 26 Oct 2011 23:14:16 +0200 Subject: sched: Set the command name of the idle tasks in SMP kernels In UP systems, the idle task is initialized using the init_task structure from which the command name is taken (currently "swapper"). In SMP systems, one idle task per CPU is forked by the worker thread from which the task structure is copied. The command name is, therefore, "kworker/0:0" or "kworker/0:1", if not updated. Since such update was lacking, all idle tasks in SMP systems were incorrectly named. This longtime bug was not discovered immediately, because there is no /proc/0 entry - the bug only becomes apparent when tracing is enabled. This patch sets the command name of the idle tasks in SMP systems to the name that is used in the INIT_TASK structure suffixed by a slash and the number of the CPU. Signed-off-by: Carsten Emde Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111026211708.768925506@osadl.org Signed-off-by: Ingo Molnar diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab0..b6e5b8b 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -126,6 +126,8 @@ extern struct cred init_cred; # define INIT_PERF_EVENTS(tsk) #endif +#define INIT_TASK_COMM "swapper" + /* * INIT_TASK is used to set up the first task table, touch at * your own risk!. Base=0, limit=0x1fffff (=2MB) @@ -162,7 +164,7 @@ extern struct cred init_cred; .group_leader = &tsk, \ RCU_INIT_POINTER(.real_cred, &init_cred), \ RCU_INIT_POINTER(.cred, &init_cred), \ - .comm = "swapper", \ + .comm = INIT_TASK_COMM, \ .thread = INIT_THREAD, \ .fs = &init_fs, \ .files = &init_files, \ diff --git a/kernel/sched.c b/kernel/sched.c index 3d2c436..d6b149c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #include @@ -6112,6 +6113,9 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) */ idle->sched_class = &idle_sched_class; ftrace_graph_init_idle_task(idle, cpu); +#if defined(CONFIG_SMP) + sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu); +#endif } /* -- cgit v0.10.2 From 78345d2edc25e001558f3b7c85906f645d38d23c Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Thu, 27 Oct 2011 13:24:32 +0530 Subject: x86: Call stop_machine_text_poke() on all CPUs It appears that stop_machine_text_poke() wants to be called on all CPUs, like it's done from text_poke_smp(). Fix text_poke_smp_batch() to do this. Signed-off-by: Rabin Vincent Acked-by: Masami Hiramatsu Signed-off-by: Peter Zijlstra Cc: Mathieu Desnoyers Cc: Jason Baron Link: http://lkml.kernel.org/r/1319702072-32676-1-git-send-email-rabin@rab.in Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index c638228..1f84794 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -738,5 +738,5 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) atomic_set(&stop_machine_first, 1); wrote_text = 0; - __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); + __stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask); } -- cgit v0.10.2 From b05e988ee89d03398bee7b0939a5743cd12fa387 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 14 Nov 2011 12:58:16 +0000 Subject: MAINTAINERS: The MIPS git tree has moved. Signed-off-by: Ralf Baechle diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..752b731 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4329,7 +4329,7 @@ MIPS M: Ralf Baechle L: linux-mips@linux-mips.org W: http://www.linux-mips.org/ -T: git git://git.linux-mips.org/pub/scm/linux.git +T: git git://git.linux-mips.org/pub/scm/ralf/linux.git Q: http://patchwork.linux-mips.org/project/linux-mips/list/ S: Supported F: Documentation/mips/ -- cgit v0.10.2 From 4af92e7a68af7b515d274f9d33b14b8a0804a0f6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 10 Nov 2011 21:33:07 +0100 Subject: MIPS: lantiq: use export.h in favour of module.h The code located at arch/mips/lantiq/ included module.h to be able to use the EXPORT_SYMBOL* macros. These can now be directly included using export.h. Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2937/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 7e9c0ff..77ed70f 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -7,7 +7,7 @@ * Copyright (C) 2010 John Crispin */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c index 44a3677..de1cb2b 100644 --- a/arch/mips/lantiq/devices.c +++ b/arch/mips/lantiq/devices.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 56ba007..e34fcfd 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin */ -#include +#include #include #include #include diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c index 9b8af77..1ff6c9d 100644 --- a/arch/mips/lantiq/setup.c +++ b/arch/mips/lantiq/setup.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c index 22d823a..6522583 100644 --- a/arch/mips/lantiq/xway/clk-ase.c +++ b/arch/mips/lantiq/xway/clk-ase.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c index ddd3959..696b1a3 100644 --- a/arch/mips/lantiq/xway/clk-xway.c +++ b/arch/mips/lantiq/xway/clk-xway.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c index d0e32ab..d614aa7 100644 --- a/arch/mips/lantiq/xway/devices.c +++ b/arch/mips/lantiq/xway/devices.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 4278a45..cbb6ae5 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c index a321451..d2fa98f 100644 --- a/arch/mips/lantiq/xway/gpio.c +++ b/arch/mips/lantiq/xway/gpio.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c index a479355..b91c7f1 100644 --- a/arch/mips/lantiq/xway/gpio_ebu.c +++ b/arch/mips/lantiq/xway/gpio_ebu.c @@ -7,7 +7,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c index 67d59d6..ff9991c 100644 --- a/arch/mips/lantiq/xway/gpio_stp.c +++ b/arch/mips/lantiq/xway/gpio_stp.c @@ -9,7 +9,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c index abe49f4..ae4959a 100644 --- a/arch/mips/lantiq/xway/prom-ase.c +++ b/arch/mips/lantiq/xway/prom-ase.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin */ -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c index 1686692a..2228133 100644 --- a/arch/mips/lantiq/xway/prom-xway.c +++ b/arch/mips/lantiq/xway/prom-xway.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin */ -#include +#include #include #include #include diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index a1be36d..3d41f0b 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 8656388..be1e1af 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From e5a44df85e8d78e5c2d3d2e4f59b460905691e2f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 11 Nov 2011 11:14:23 -0500 Subject: [SCSI] hpsa: Disable ASPM The Windows driver .inf disables ASPM on hpsa devices. Do the same because the selection of a non default ASPM policy can cause the device to hang. Signed-off-by: Matthew Garrett Cc: stable@kernel.org Acked-by: Mike Miller Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index e76107b..865d452 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -3922,6 +3923,10 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h) dev_warn(&h->pdev->dev, "controller appears to be disabled\n"); return -ENODEV; } + + pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S | + PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); + err = pci_enable_device(h->pdev); if (err) { dev_warn(&h->pdev->dev, "unable to enable PCI device\n"); -- cgit v0.10.2 From 4cac2eb158c6da0c761689345c6cc5df788a6292 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Aug 2011 10:16:43 -0600 Subject: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung Cc: Joerg Roedel Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index aca972b..dd7e0c5 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -278,8 +278,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) static int is_shpc_capable(struct pci_dev *dev) { - if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) return 1; if (!pci_find_capability(dev, PCI_CAP_ID_SHPC)) return 0; diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 36547f0..75ba231 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -944,8 +944,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ ctrl_dbg(ctrl, "Hotplug Controller:\n"); - if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) { + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) { /* amd shpc driver doesn't use Base Offset; assume 0 */ ctrl->mmio_base = pci_resource_start(pdev, 0); ctrl->mmio_size = pci_resource_len(pdev, 0); -- cgit v0.10.2 From e0ce42e19ce1978a5aee33b2954d7e1a730e88c4 Mon Sep 17 00:00:00 2001 From: Liu Gang Date: Fri, 11 Nov 2011 21:48:28 +0800 Subject: fsl-rio: fix compile error The "#include " was replaced by "#include " in the patch "powerpc: various straight conversions from module.h --> export.h". This will cause the following compile problem: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception': arch/powerpc/sysdev/fsl_rio.c:296: error: implicit declaration of function 'search_exception_tables'. The file fsl_rio.c needs the declaration of function "search_exception_tables" in the header file "linux/module.h". Signed-off-by: Liu Gang Signed-off-by: Paul Gortmaker diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index de170fd..22ffccd 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -23,7 +23,7 @@ */ #include -#include +#include #include #include #include -- cgit v0.10.2 From 4a5f4dd8595a3d3cdf75db7247b644ae37f5d460 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 14 Nov 2011 14:25:36 -0500 Subject: mlx4_en: Remove FCS bytes from packet length. When HW doesn't remove FCS bytes they are reported in the completion byte count, we don't need to take them to skb. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index b89c36d..c2df6c3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -581,6 +581,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud * Packet is OK - process it. */ length = be32_to_cpu(cqe->byte_cnt); + length -= ring->fcs_del; ring->bytes += length; ring->packets++; @@ -813,8 +814,11 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn, context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma); /* Cancel FCS removal if FW allows */ - if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) + if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) { context->param3 |= cpu_to_be32(1 << 29); + ring->fcs_del = ETH_FCS_LEN; + } else + ring->fcs_del = 0; err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state); if (err) { diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 8fda331c..207b5ad 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -272,6 +272,7 @@ struct mlx4_en_rx_ring { u32 prod; u32 cons; u32 buf_size; + u8 fcs_del; void *buf; void *rx_info; unsigned long bytes; -- cgit v0.10.2 From a32fd63dbf15f70cafd30b306c31f117129c57f2 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 14 Nov 2011 05:01:18 +0000 Subject: NET: MIPS: lantiq: fix etop compile error The Lantiq ETOP ethernet driver fails to build in 3.2-rc1 due to 2 missing header files. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 6bb2b95..0b3567a 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include #include -- cgit v0.10.2 From 1d91a96268a0b2d7301c3ee67a784b712f34010f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 8 Sep 2011 14:11:17 +0300 Subject: usb: gadget: udc-core: fix bug on soft_connect and srp interfaces We should not be using dev_get_drvdata() because we never call dev_set_drvdata(). Let's use container_of() as all other sysfs attributes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 022baec..31e410b 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -344,7 +344,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver); static ssize_t usb_udc_srp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct usb_udc *udc = dev_get_drvdata(dev); + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "1")) usb_gadget_wakeup(udc->gadget); -- cgit v0.10.2 From 3c2d636a1c6f1f84adf77737ca716f956595ae80 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 2 Oct 2011 21:46:47 +0300 Subject: usb: musb: gadget: don't call ->disconnect() on exit that has already being done by udc-core.c. It's unnecessary and might cause issues with some gadget drivers. Tested: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ae4a20a..d51043a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1999,10 +1999,6 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) nuke(&hw_ep->ep_out, -ESHUTDOWN); } } - - spin_unlock(&musb->lock); - driver->disconnect(&musb->g); - spin_lock(&musb->lock); } } -- cgit v0.10.2 From 6f39504de55ef69bb8d9d0a645949c5d0407faab Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 3 Oct 2011 16:39:30 +0300 Subject: usb: gadget: core: fix bug when removing gadget drivers usb_gadget_disconnect() is responsible of removing data pullups. Before doing that we must, first, tell gadget driver we're disconnecting (by calling disconnect method on gadget driver structure), unbind the gadget driver and stop the controller. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 31e410b..4c5ff14 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -210,10 +210,10 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); if (udc_is_newstyle(udc)) { - usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); - + usb_gadget_disconnect(udc->gadget); } else { usb_gadget_stop(udc->gadget, udc->driver); } -- cgit v0.10.2 From 59d81f8139bff0c2a94971ceec41edd42f16ed47 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 3 Oct 2011 16:43:56 +0300 Subject: usb: gadget: core: allow everybody to read sysfs attributes Those are simply giving information about the current state of the UDC, nothing really fancy. We can let everybody read those. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 4c5ff14..6939e17 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -378,7 +378,7 @@ static ssize_t usb_udc_speed_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%s\n", usb_speed_string(udc->gadget->speed)); } -static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL); +static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL); #define USB_UDC_ATTR(name) \ ssize_t usb_udc_##name##_show(struct device *dev, \ @@ -389,7 +389,7 @@ ssize_t usb_udc_##name##_show(struct device *dev, \ \ return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name); \ } \ -static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL) +static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL) static USB_UDC_ATTR(is_dualspeed); static USB_UDC_ATTR(is_otg); -- cgit v0.10.2 From d06785942de066992a3b6a570829097c23c327aa Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 1 Nov 2011 08:37:40 +0100 Subject: usb: musb: remove incorrectly added ARCH_U5500 define ARCH_U8500 covers both MACH_U8500 and MACH_U5500 Reported-by: Paul Bolle Signed-off-by: Mian Yousaf Kaukab Acked-by: Linus Walleij Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index fc34b8b..e118724 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -60,7 +60,7 @@ config USB_MUSB_BLACKFIN config USB_MUSB_UX500 tristate "U8500 and U5500" - depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500) + depends on (ARCH_U8500 && AB8500_USB) endchoice diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 20a2873..c1fa12e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1477,8 +1477,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \ - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \ - defined(CONFIG_ARCH_U5500) + defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) static irqreturn_t generic_interrupt(int irq, void *__hci) { -- cgit v0.10.2 From 0de174b56ba70e5c0a26de9b5d2889260164d666 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 2 Nov 2011 12:17:59 +0200 Subject: usb: musb: hdrc: fix dependency on USB_GADGET_DUALSPEED in Kconfig USB_MUSB_HDRC depends on USB_GADGET_DUALSPEED. If HDRC is selected but DUALSPEED is not, the kernel oopses: [ 3.132781] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.141296] pgd = c0004000 [ 3.144134] [00000000] *pgd=00000000 [ 3.147918] Internal error: Oops: 5 [#1] SMP [ 3.152404] Modules linked in: [ 3.155609] CPU: 0 Not tainted (3.1.0-rc9-wl+ #417) [ 3.161132] PC is at composite_setup+0x738/0xbb4 [ 3.165985] LR is at vprintk+0x400/0x47c [ 3.170135] pc : [] lr : [] psr: 60000093 [ 3.170135] sp : c065dd50 ip : dfb1f0fc fp : c065ddbc [ 3.182220] r10: 00000000 r9 : df8fcae8 r8 : df8fcaa0 [ 3.187713] r7 : 00000000 r6 : df8eaa20 r5 : dfae8ea0 r4 : 00000000 [ 3.194580] r3 : df8fcae8 r2 : 00010002 r1 : c065dc40 r0 : 00000047 [ 3.201446] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.209228] Control: 10c53c7d Table: 8000404a DAC: 00000015 [ 3.215270] Process swapper (pid: 0, stack limit = 0xc065c2f8) [ 3.221405] Stack: (0xc065dd50 to 0xc065e000) [...] [ 3.415405] [] (composite_setup+0x738/0xbb4) from [] (musb_g_ep0_irq+0x9d0/0xaf8) [ 3.425109] [] (musb_g_ep0_irq+0x9d0/0xaf8) from [] (musb_interrupt+0xb48/0xc74) [ 3.434722] [] (musb_interrupt+0xb48/0xc74) from [] (generic_interrupt+0x68/0x80) [ 3.444458] [] (generic_interrupt+0x68/0x80) from [] (handle_irq_event_percpu+0x9c/0x234) [ 3.454925] [] (handle_irq_event_percpu+0x9c/0x234) from [] (handle_irq_event+0x4c/0x6c) [ 3.465270] [] (handle_irq_event+0x4c/0x6c) from [] (handle_fasteoi_irq+0xd8/0x110) [ 3.475158] [] (handle_fasteoi_irq+0xd8/0x110) from [] (generic_handle_irq+0x34/0x3c) [ 3.485260] [] (generic_handle_irq+0x34/0x3c) from [] (handle_IRQ+0x88/0xc8) [ 3.494537] [] (handle_IRQ+0x88/0xc8) from [] (asm_do_IRQ+0x18/0x1c) [ 3.503051] [] (asm_do_IRQ+0x18/0x1c) from [] (__irq_svc+0x38/0xc0) This patch changes Kconfig so that USB_GADGET_DUALSPEED is selected automatically by USB_MUSB_HDRC. Signed-off-by: Luciano Coelho Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e118724..07a0346 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS + select USB_GADGET_DUALSPEED tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB -- cgit v0.10.2 From b8cbbf803d5ad0971665dd502d784148464c6d1a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 31 Oct 2011 16:01:29 +0900 Subject: usb: gadget: r8a66597-udc: fix for udc-newstyle The udc-newstyle needs device_register in probe() of platform_device. If it doesn't call, kernel panic happens in the sysfs_create_dir() when we run modprobe a gadget driver. [ balbi@ti.com : fix compile warning introduced by this patch ] Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 68a826a..38f9988 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1742,7 +1742,6 @@ static int r8a66597_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); - int retval; if (!driver || driver->speed != USB_SPEED_HIGH @@ -1752,16 +1751,7 @@ static int r8a66597_start(struct usb_gadget *gadget, return -ENODEV; /* hook up the driver */ - driver->driver.bus = NULL; r8a66597->driver = driver; - r8a66597->gadget.dev.driver = &driver->driver; - - retval = device_add(&r8a66597->gadget.dev); - if (retval) { - dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n", - retval); - goto error; - } init_controller(r8a66597); r8a66597_bset(r8a66597, VBSE, INTENB0); @@ -1775,12 +1765,6 @@ static int r8a66597_start(struct usb_gadget *gadget, } return 0; - -error: - r8a66597->driver = NULL; - r8a66597->gadget.dev.driver = NULL; - - return retval; } static int r8a66597_stop(struct usb_gadget *gadget, @@ -1794,7 +1778,6 @@ static int r8a66597_stop(struct usb_gadget *gadget, disable_controller(r8a66597); spin_unlock_irqrestore(&r8a66597->lock, flags); - device_del(&r8a66597->gadget.dev); r8a66597->driver = NULL; return 0; } @@ -1845,6 +1828,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev) clk_put(r8a66597->clk); } #endif + device_unregister(&r8a66597->gadget.dev); kfree(r8a66597); return 0; } @@ -1924,13 +1908,17 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; r8a66597->gadget.ops = &r8a66597_gadget_ops; - device_initialize(&r8a66597->gadget.dev); dev_set_name(&r8a66597->gadget.dev, "gadget"); r8a66597->gadget.is_dualspeed = 1; r8a66597->gadget.dev.parent = &pdev->dev; r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask; r8a66597->gadget.dev.release = pdev->dev.release; r8a66597->gadget.name = udc_name; + ret = device_register(&r8a66597->gadget.dev); + if (ret < 0) { + dev_err(&pdev->dev, "device_register failed\n"); + goto clean_up; + } init_timer(&r8a66597->timer); r8a66597->timer.function = r8a66597_timer; @@ -1945,7 +1933,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); ret = PTR_ERR(r8a66597->clk); - goto clean_up; + goto clean_up_dev; } clk_enable(r8a66597->clk); } @@ -2014,7 +2002,9 @@ clean_up2: clk_disable(r8a66597->clk); clk_put(r8a66597->clk); } +clean_up_dev: #endif + device_unregister(&r8a66597->gadget.dev); clean_up: if (r8a66597) { if (r8a66597->sudmac_reg) -- cgit v0.10.2 From 05bb7013038a2b609aef14ad4e07afe031daec49 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 31 Oct 2011 16:01:33 +0900 Subject: usb: gadget: r8a66597-udc: fix flush fifo handling The "BCLR" in CFIFOCTR/DnFIFOCTR can flush the fifo of "CPU side" only. To flush the fifo of "SIE side", we have to use the "ACLRM" in PIPEnCTR. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 38f9988..24f84b2 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1718,6 +1718,8 @@ static void r8a66597_fifo_flush(struct usb_ep *_ep) if (list_empty(&ep->queue) && !ep->busy) { pipe_stop(ep->r8a66597, ep->pipenum); r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr); + r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr); + r8a66597_write(ep->r8a66597, 0, ep->pipectr); } spin_unlock_irqrestore(&ep->r8a66597->lock, flags); } -- cgit v0.10.2 From 0e042be348b864a57a8a452aaa7ec49be5fb9e59 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Fri, 4 Nov 2011 16:16:26 +0100 Subject: usb: gadget: fsl_udc_core: fix compile error. Fix compile error in file drivers/usb/gadget/fsl_udc_core.c. drivers/usb/gadget/fsl_udc_core.c: In function 'portscx_device_speed': drivers/usb/gadget/fsl_udc_core.c:1720: error: 'speed' undeclared (first use in this function) Introduced in commit e538dfdae85244fd2c4231725d82cc1f1bc4942c (usb: Provide usb_speed_string() function) Signed-off-by: Alexander Aring Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b2c44e1..d786ba3 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1717,7 +1717,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) static inline enum usb_device_speed portscx_device_speed(u32 reg) { - switch (speed & PORTSCX_PORT_SPEED_MASK) { + switch (reg & PORTSCX_PORT_SPEED_MASK) { case PORTSCX_PORT_SPEED_HIGH: return USB_SPEED_HIGH; case PORTSCX_PORT_SPEED_FULL: -- cgit v0.10.2 From 7fccd480b7fe84a98ee252fa79dd92f7fff5ec2a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 23 Oct 2011 22:55:54 -0700 Subject: usb: gadget: renesas_usbhs: fixup struct completion usage Since renesas_usbhs mod_host didn't use struct completion as static object, the warning of lockdep came out. This patch fixup this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1a7208a..9b88868 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -103,7 +103,7 @@ struct usbhsh_hpriv { u32 port_stat; /* USB_PORT_STAT_xxx */ - struct completion *done; + struct completion setup_ack_done; /* see usbhsh_req_alloc/free */ struct list_head ureq_link_active; @@ -549,8 +549,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, * usbhsh_irq_setup_ack() * usbhsh_irq_setup_err() */ - DECLARE_COMPLETION(done); - hpriv->done = &done; + init_completion(&hpriv->setup_ack_done); /* copy original request */ memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); @@ -572,8 +571,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, /* * wait setup packet ACK */ - wait_for_completion(&done); - hpriv->done = NULL; + wait_for_completion(&hpriv->setup_ack_done); dev_dbg(dev, "%s done\n", __func__); } @@ -1095,10 +1093,7 @@ static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, dev_dbg(dev, "setup packet OK\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup ack happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1111,10 +1106,7 @@ static int usbhsh_irq_setup_err(struct usbhs_priv *priv, dev_dbg(dev, "setup packet Err\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup err happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1279,7 +1271,6 @@ int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) hpriv->mod.stop = usbhsh_stop; hpriv->pipe_info = pipe_info; hpriv->pipe_size = pipe_size; - hpriv->done = NULL; usbhsh_req_list_init(hpriv); usbhsh_port_stat_init(hpriv); -- cgit v0.10.2 From c9ae0c91b920a7ba91725d170aa023be8c12db7b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 26 Oct 2011 01:21:07 -0700 Subject: usb: gadget: renesas_usbhs: fixup bogus conversion this patch fixup bogus conversion of 8a9775ab71218690ac34bed9e237e2b968857d3a (usb: gadget: renesas_usbhs: fix compile warning) Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 8da685e..ffdf5d1 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -820,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) if (len % 4) /* 32bit alignment */ goto usbhsf_pio_prepare_push; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; /* get enable DMA fifo */ @@ -897,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) if (!fifo) goto usbhsf_pio_prepare_pop; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop; ret = usbhsf_fifo_select(pipe, fifo, 0); -- cgit v0.10.2 From b7a8d17db9a86db1040862600cf3a02848f83844 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 26 Oct 2011 19:33:49 -0700 Subject: usb: gadget: renesas_usbhs: fixup section mismatch warning Fix up the following section mismatch warnings: WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xf5d): Section mismatch in reference from the function usbhs_mod_probe() to the function .devinit.text:usbhs_mod_host_probe() The function usbhs_mod_probe() references the function __devinit usbhs_mod_host_probe(). This is often because usbhs_mod_probe lacks a __devinit annotation or the annotation of usbhs_mod_host_probe is wrong. WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xfd7): Section mismatch in reference from the function usbhs_mod_probe() to the function .devexit.text:usbhs_mod_host_remove() The function usbhs_mod_probe() references a function in an exit section. Often the function usbhs_mod_host_remove() has valid usage outside the exit section and the fix is to remove the __devexit annotation of usbhs_mod_host_remove. WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0x1005): Section mismatch in reference from the function usbhs_mod_remove() to the function .devexit.text:usbhs_mod_host_remove() The function usbhs_mod_remove() references a function in an exit section. Often the function usbhs_mod_host_remove() has valid usage outside the exit section and the fix is to remove the __devexit annotation of usbhs_mod_host_remove. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d2e2efa..08c679c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -405,7 +405,7 @@ int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) /* * platform functions */ -static int __devinit usbhs_probe(struct platform_device *pdev) +static int usbhs_probe(struct platform_device *pdev) { struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; struct renesas_usbhs_driver_callback *dfunc; diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index 8ae3733..6c68755 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -143,8 +143,8 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); */ #if defined(CONFIG_USB_RENESAS_USBHS_HCD) || \ defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE) -extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv); -extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv); +extern int usbhs_mod_host_probe(struct usbhs_priv *priv); +extern int usbhs_mod_host_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_host_probe(struct usbhs_priv *priv) { @@ -157,8 +157,8 @@ static inline void usbhs_mod_host_remove(struct usbhs_priv *priv) #if defined(CONFIG_USB_RENESAS_USBHS_UDC) || \ defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE) -extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv); -extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv); +extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv); +extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 4cc7ee0..d9717e0 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -830,7 +830,7 @@ static int usbhsg_stop(struct usbhs_priv *priv) return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv) +int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv; struct usbhsg_uep *uep; @@ -927,7 +927,7 @@ usbhs_mod_gadget_probe_err_gpriv: return ret; } -void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) +void usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 9b88868..b964f25 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1227,7 +1227,7 @@ static int usbhsh_stop(struct usbhs_priv *priv) return 0; } -int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) +int usbhs_mod_host_probe(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv; struct usb_hcd *hcd; @@ -1290,7 +1290,7 @@ usbhs_mod_host_probe_err: return -ENOMEM; } -int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv) +int usbhs_mod_host_remove(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); -- cgit v0.10.2 From db332bc9b26bbd79a37241721cccc9919489d5a9 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Thu, 13 Oct 2011 17:46:36 -0700 Subject: usb: gadget: storage: check for valid USB_BULK_GET_MAX_LUN_REQUEST The latest USB-IF CV tester checks for a valid length for this request. Signed-off-by: Paul Zimmerman Acked-by: Alan Stern Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 52583a2..dfd0044 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -639,7 +639,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 1) return -EDOM; VDBG(fsg, "get max LUN\n"); *(u8 *)req->buf = fsg->common->nluns - 1; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f7e39b0..4314cf2 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -875,7 +875,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 1) { value = -EDOM; break; } -- cgit v0.10.2 From ce7b6121851c72d661134d113a78161095e0ae73 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Wed, 26 Oct 2011 12:07:54 -0700 Subject: usb: gadget: storage: check for valid USB_BULK_RESET_REQUEST wLength The USB-IF CV compliance tester is getting stricter, and it would be valid for it to fail a mass-storage device that accepts an invalid USB_BULK_RESET_REQUEST request. Although it doesn't do that yet, let's be proactive and fix that now. Suggested by Alan Stern. Signed-off-by: Paul Zimmerman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index dfd0044..c39d588 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -624,7 +624,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 0) return -EDOM; /* diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4314cf2..11b5196 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -859,7 +859,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 0) { value = -EDOM; break; } -- cgit v0.10.2 From 74203de067ae5c71526168b597088022836e31d3 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 15 Oct 2011 13:45:05 +0200 Subject: usb: gadget: fix MIDI gadget jack allocation The dynamic jack allocation of the MIDI gadget currently links all external jacks to one single instance of an embedded jack. According to the spec, this is only valid if these streams always carry the same data stream, as described in the USB MIDI 1.0 spec, chapter 3.3.1. Also, genius Windows 7(tm) terminates it's life cycle instantly with a blue screen of death once a device with more than one input and output port with the current implementation is connected. While at it, and because it grew again by this change, allocate the temporary function pointer list on the heap, not on the stack. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 67b2229..3797b3d 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -95,7 +95,6 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req); DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); -DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); /* B.3.1 Standard AC Interface Descriptor */ @@ -140,26 +139,6 @@ static struct usb_ms_header_descriptor ms_header_desc __initdata = { /* .wTotalLength = DYNAMIC */ }; -/* B.4.3 Embedded MIDI IN Jack Descriptor */ -static struct usb_midi_in_jack_descriptor jack_in_emb_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ -}; - -/* B.4.4 Embedded MIDI OUT Jack Descriptor */ -static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = { - /* .bLength = DYNAMIC */ - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ - /* .bNrInputPins = DYNAMIC */ - /* .pins = DYNAMIC */ -}; - /* B.5.1 Standard Bulk OUT Endpoint Descriptor */ static struct usb_endpoint_descriptor bulk_out_desc = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, @@ -758,9 +737,11 @@ fail: static int __init f_midi_bind(struct usb_configuration *c, struct usb_function *f) { - struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12]; + struct usb_descriptor_header **midi_function; struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; + struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS]; struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS]; + struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS]; struct usb_composite_dev *cdev = c->cdev; struct f_midi *midi = func_to_midi(f); int status, n, jack = 1, i = 0; @@ -798,6 +779,14 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) goto fail; midi->out_ep->driver_data = cdev; /* claim */ + /* allocate temporary function list */ + midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function), + GFP_KERNEL); + if (!midi_function) { + status = -ENOMEM; + goto fail; + } + /* * construct the function's descriptor set. As the number of * input and output MIDI ports is configurable, we have to do @@ -811,73 +800,74 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) /* calculate the header's wTotalLength */ n = USB_DT_MS_HEADER_SIZE - + (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE - + (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1); + + (midi->in_ports + midi->out_ports) * + (USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1)); ms_header_desc.wTotalLength = cpu_to_le16(n); midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc; - /* we have one embedded IN jack */ - jack_in_emb_desc.bJackID = jack++; - midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc; - - /* and a dynamic amount of external IN jacks */ - for (n = 0; n < midi->in_ports; n++) { - struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n]; - - ext->bLength = USB_DT_MIDI_IN_SIZE; - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->iJack = 0; - - midi_function[i++] = (struct usb_descriptor_header *) ext; - } - - /* one embedded OUT jack ... */ - jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports); - jack_out_emb_desc.bJackID = jack++; - jack_out_emb_desc.bNrInputPins = midi->in_ports; - /* ... which referencess all external IN jacks */ + /* configure the external IN jacks, each linked to an embedded OUT jack */ for (n = 0; n < midi->in_ports; n++) { - jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID; - jack_out_emb_desc.pins[n].baSourcePin = 1; + struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n]; + + in_ext->bLength = USB_DT_MIDI_IN_SIZE; + in_ext->bDescriptorType = USB_DT_CS_INTERFACE; + in_ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_ext->bJackType = USB_MS_EXTERNAL; + in_ext->bJackID = jack++; + in_ext->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_ext; + + out_emb->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_emb->bDescriptorType = USB_DT_CS_INTERFACE; + out_emb->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_emb->bJackType = USB_MS_EMBEDDED; + out_emb->bJackID = jack++; + out_emb->bNrInputPins = 1; + out_emb->pins[0].baSourcePin = 1; + out_emb->pins[0].baSourceID = in_ext->bJackID; + out_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) out_emb; + + /* link it to the endpoint */ + ms_in_desc.baAssocJackID[n] = out_emb->bJackID; } - midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc; - - /* and multiple external OUT jacks ... */ + /* configure the external OUT jacks, each linked to an embedded IN jack */ for (n = 0; n < midi->out_ports; n++) { - struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n]; - int m; - - ext->bLength = USB_DT_MIDI_OUT_SIZE(1); - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->bNrInputPins = 1; - ext->iJack = 0; - /* ... which all reference the same embedded IN jack */ - for (m = 0; m < midi->out_ports; m++) { - ext->pins[m].baSourceID = jack_in_emb_desc.bJackID; - ext->pins[m].baSourcePin = 1; - } - - midi_function[i++] = (struct usb_descriptor_header *) ext; + struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n]; + + in_emb->bLength = USB_DT_MIDI_IN_SIZE; + in_emb->bDescriptorType = USB_DT_CS_INTERFACE; + in_emb->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_emb->bJackType = USB_MS_EMBEDDED; + in_emb->bJackID = jack++; + in_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_emb; + + out_ext->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_ext->bDescriptorType = USB_DT_CS_INTERFACE; + out_ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_ext->bJackType = USB_MS_EXTERNAL; + out_ext->bJackID = jack++; + out_ext->bNrInputPins = 1; + out_ext->iJack = 0; + out_ext->pins[0].baSourceID = in_emb->bJackID; + out_ext->pins[0].baSourcePin = 1; + midi_function[i++] = (struct usb_descriptor_header *) out_ext; + + /* link it to the endpoint */ + ms_out_desc.baAssocJackID[n] = in_emb->bJackID; } /* configure the endpoint descriptors ... */ ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); ms_out_desc.bNumEmbMIDIJack = midi->in_ports; - for (n = 0; n < midi->in_ports; n++) - ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID; ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); ms_in_desc.bNumEmbMIDIJack = midi->out_ports; - for (n = 0; n < midi->out_ports; n++) - ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID; /* ... and add them to the list */ midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc; @@ -901,6 +891,8 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) f->descriptors = usb_copy_descriptors(midi_function); } + kfree(midi_function); + return 0; fail: -- cgit v0.10.2 From 001428e4871d6c62f5e16c62df681624d8b480c1 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:05 +0200 Subject: USB: gadgetfs: gadgetfs_disconnect: fix inconsistent lock state Under certain circumstances lockdep finds an inconsistent lock state in gadgetfs. The problem can be reproduced with a hardware using the ci13xxx_udc driver and the gadgetfs test program (needs a patch to support the ci13xxx_udc, though): http://www.linux-usb.org/gadget/usb.c Start the test program, wait to initialize, then press Ctrl+c. This patch fixes the following problem by using spin_lock_irqsave() instead of spin_lock(). ================================= [ INFO: inconsistent lock state ] 3.1.0-rc6+ #158 --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. usb/113 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&dev->lock)->rlock){?.....}, at: [] gadgetfs_disconnect+0x14/0x80 [gadgetfs] {IN-HARDIRQ-W} state was registered at: [] mark_irqflags+0x14c/0x1ac [] __lock_acquire+0x4e0/0x8f0 [] lock_acquire+0x98/0x1a8 [] _raw_spin_lock+0x54/0x8c [] gadgetfs_disconnect+0x14/0x80 [gadgetfs] [] _gadget_stop_activity+0xd4/0x154 [] isr_reset_handler+0x34/0x1c0 [] udc_irq+0x204/0x228 [] handle_irq_event_percpu+0x64/0x3a0 [] handle_irq_event+0x3c/0x5c [] handle_level_irq+0x8c/0x10c [] generic_handle_irq+0x30/0x44 [] handle_IRQ+0x30/0x84 [] __irq_svc+0x38/0x60 [] default_idle+0x30/0x34 [] cpu_idle+0x9c/0xd8 [] start_kernel+0x278/0x2bc irq event stamp: 6412 hardirqs last enabled at (6412): [] _raw_spin_unlock_irqrestore+0x30/0x5c hardirqs last disabled at (6411): [] _raw_spin_lock_irqsave+0x20/0xa0 softirqs last enabled at (6381): [] irq_exit+0xa0/0xa8 softirqs last disabled at (6372): [] irq_exit+0xa0/0xa8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&dev->lock)->rlock); lock(&(&dev->lock)->rlock); *** DEADLOCK *** 1 lock held by usb/113: #0: (udc_lock#2){+.+.+.}, at: [] usb_gadget_unregister_driver+0x34/0x88 stack backtrace: [] (unwind_backtrace+0x0/0xf0) from [] (print_usage_bug+0x144/0x1c4) [] (print_usage_bug+0x144/0x1c4) from [] (mark_lock_irq+0x22c/0x274) [] (mark_lock_irq+0x22c/0x274) from [] (mark_lock+0x148/0x3e0) [] (mark_lock+0x148/0x3e0) from [] (mark_irqflags+0xfc/0x1ac) [] (mark_irqflags+0xfc/0x1ac) from [] (__lock_acquire+0x4e0/0x8f0) [] (__lock_acquire+0x4e0/0x8f0) from [] (lock_acquire+0x98/0x1a8) [] (lock_acquire+0x98/0x1a8) from [] (_raw_spin_lock+0x54/0x8c) [] (_raw_spin_lock+0x54/0x8c) from [] (gadgetfs_disconnect+0x14/0x80 [gadgetfs]) [] (gadgetfs_disconnect+0x14/0x80 [gadgetfs]) from [] (_gadget_stop_activity+0xd4/0x154) [] (_gadget_stop_activity+0xd4/0x154) from [] (ci13xxx_stop+0xbc/0x17c) [] (ci13xxx_stop+0xbc/0x17c) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (dev_release+0x14/0x48 [gadgetfs]) [] (dev_release+0x14/0x48 [gadgetfs]) from [] (__fput+0xa4/0x1f0) [] (__fput+0xa4/0x1f0) from [] (filp_close+0x5c/0x74) [] (filp_close+0x5c/0x74) from [] (sys_close+0xa8/0x150) [] (sys_close+0xa8/0x150) from [] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a392ec0..6ccae27 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1730,8 +1730,9 @@ static void gadgetfs_disconnect (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); + unsigned long flags; - spin_lock (&dev->lock); + spin_lock_irqsave (&dev->lock, flags); if (dev->state == STATE_DEV_UNCONNECTED) goto exit; dev->state = STATE_DEV_UNCONNECTED; @@ -1740,7 +1741,7 @@ gadgetfs_disconnect (struct usb_gadget *gadget) next_event (dev, GADGETFS_DISCONNECT); ep0_readable (dev); exit: - spin_unlock (&dev->lock); + spin_unlock_irqrestore (&dev->lock, flags); } static void -- cgit v0.10.2 From 954aad8cd18c928e2db5229f6fa71c80d1c3d8b5 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 10 Oct 2011 18:38:06 +0200 Subject: USB: ci13xxx_udc: fix logic to mark request dma addresses as invalid The current driver sets the request's dma addr (mReq->req.dma) to 0 to mark the DMA address as not valid. However some gadget drivers (e.g. gadgetfs) set the request's dma addr to DMA_ADDR_INVALID to mark the address as invalid. This leads to bogus data send because the ci13xxx_udc driver assumes the request has already been mapped. This patch fixes the problem, by using DMA_ADDR_INVALID instead of 0 to mark the request's DMA address as invalid. Tested-by: Pavankumar Kondeti Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 83428f5..ae6c001 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -71,6 +71,9 @@ /****************************************************************************** * DEFINE *****************************************************************************/ + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + /* ctrl register bank access */ static DEFINE_SPINLOCK(udc_lock); @@ -1434,7 +1437,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) return -EALREADY; mReq->req.status = -EALREADY; - if (length && !mReq->req.dma) { + if (length && mReq->req.dma == DMA_ADDR_INVALID) { mReq->req.dma = \ dma_map_single(mEp->device, mReq->req.buf, length, mEp->dir ? DMA_TO_DEVICE : @@ -1453,7 +1456,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) dma_unmap_single(mEp->device, mReq->req.dma, length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } return -ENOMEM; @@ -1549,7 +1552,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } @@ -2189,6 +2192,7 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); if (mReq != NULL) { INIT_LIST_HEAD(&mReq->queue); + mReq->req.dma = DMA_ADDR_INVALID; mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, &mReq->dma); @@ -2328,7 +2332,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } req->status = -ECONNRESET; -- cgit v0.10.2 From fd537c041b7f2cbceb5a21c37946e017006edd1c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:07 +0200 Subject: USB: ci13xxx_udc: fix deadlock during rmmod The inline documentation of _gadget_stop_activity() states that the function should be called holding the udc->lock. This however will result in a deadlock, because _gadget_stop_activity() takes the udc->lock. During normal operation _gadget_stop_activity() is always called unlocked, but in ci13xxx_stop() it's called locked, this results in the following deadlock during rmmod of a gadget driver. This patch fixes the deadlock by calling _gadget_stop_activity() always unlocked, the inline documentation is adjusted accordingly. ============================================= [ INFO: possible recursive locking detected ] 3.1.0-rc6+ #159 --------------------------------------------- rmmod/121 is trying to acquire lock: (udc_lock){-.-...}, at: [] _gadget_stop_activity+0x18/0x154 but task is already holding lock: (udc_lock){-.-...}, at: [] ci13xxx_stop+0x5c/0x164 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(udc_lock); lock(udc_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by rmmod/121: #0: (udc_lock#2){+.+.+.}, at: [] usb_gadget_unregister_driver+0x34/0x88 #1: (udc_lock){-.-...}, at: [] ci13xxx_stop+0x5c/0x164 stack backtrace: [] (unwind_backtrace+0x0/0xf0) from [] (check_deadlock.clone.24+0x284/0x2c4) [] (check_deadlock.clone.24+0x284/0x2c4) from [] (validate_chain.clone.25+0x430/0x6fc) [] (validate_chain.clone.25+0x430/0x6fc) from [] (__lock_acquire+0x494/0x8f0) [] (__lock_acquire+0x494/0x8f0) from [] (lock_acquire+0x98/0x1a8) [] (lock_acquire+0x98/0x1a8) from [] (_raw_spin_lock_irqsave+0x64/0xa0) [] (_raw_spin_lock_irqsave+0x64/0xa0) from [] (_gadget_stop_activity+0x18/0x154) [] (_gadget_stop_activity+0x18/0x154) from [] (ci13xxx_stop+0xb0/0x164) [] (ci13xxx_stop+0xb0/0x164) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (sys_delete_module+0x1fc/0x26c) [] (sys_delete_module+0x1fc/0x26c) from [] (ret_fast_syscall+0x0/0x38) BUG: spinlock lockup on CPU#0, rmmod/121, c05b1644 [] (unwind_backtrace+0x0/0xf0) from [] (do_raw_spin_lock+0x128/0x144) [] (do_raw_spin_lock+0x128/0x144) from [] (_raw_spin_lock_irqsave+0x88/0xa0) [] (_raw_spin_lock_irqsave+0x88/0xa0) from [] (_gadget_stop_activity+0x18/0x154) [] (_gadget_stop_activity+0x18/0x154) from [] (ci13xxx_stop+0xb0/0x164) [] (ci13xxx_stop+0xb0/0x164) from [] (usb_gadget_remove_driver+0x88/0x98) [] (usb_gadget_remove_driver+0x88/0x98) from [] (usb_gadget_unregister_driver+0x68/0x88) [] (usb_gadget_unregister_driver+0x68/0x88) from [] (sys_delete_module+0x1fc/0x26c) [] (sys_delete_module+0x1fc/0x26c) from [] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index ae6c001..4241241 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1613,7 +1613,6 @@ __acquires(mEp->lock) * @gadget: gadget * * This function returns an error code - * Caller must hold lock */ static int _gadget_stop_activity(struct usb_gadget *gadget) { @@ -2707,7 +2706,9 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); + spin_unlock_irqrestore(udc->lock, flags); _gadget_stop_activity(&udc->gadget); + spin_lock_irqsave(udc->lock, flags); pm_runtime_put(&udc->gadget.dev); } -- cgit v0.10.2 From 194fa47ef629df07d87064ca4aa973939fa6fb4d Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:08 +0200 Subject: USB: ci13xxx_udc: fix debug trace code This patch fixes the following compile errors that show up if switching on the debug trace code: drivers/usb/gadget/ci13xxx_udc.c: In function 'ci13xxx_wakeup': drivers/usb/gadget/ci13xxx_udc.c:2517:3: error: 'dev' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_udc.c:2517:3: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/gadget/ci13xxx_udc.c: In function 'udc_probe': drivers/usb/gadget/ci13xxx_udc.c:2867:2: error: 'name' undeclared (first use in this function) Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 4241241..9a0c397 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2503,12 +2503,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) spin_lock_irqsave(udc->lock, flags); if (!udc->remote_wakeup) { ret = -EOPNOTSUPP; - dbg_trace("remote wakeup feature is not enabled\n"); + trace("remote wakeup feature is not enabled\n"); goto out; } if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; - dbg_trace("port is not suspended\n"); + trace("port is not suspended\n"); goto out; } hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); @@ -2855,7 +2855,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, struct ci13xxx *udc; int retval = 0; - trace("%p, %p, %p", dev, regs, name); + trace("%p, %p, %p", dev, regs, driver->name); if (dev == NULL || regs == NULL || driver == NULL || driver->name == NULL) -- cgit v0.10.2 From 4703d2e9d06cd1e5add773aa6cc5587e6664bf78 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 18:38:11 +0200 Subject: USB: ci13xxx_msm: add module license Since commit "193ab2a usb: gadget: allow multiple gadgets to be built" the udc controllers can be compiled as a module. The ci13xxx_msm driver is missing the MODULE_LICENSE statement, so loading fails with: ci13xxx_msm: module license 'unspecified' taints kernel. ci13xxx_msm: Unknown symbol dev_set_name (err 0) ci13xxx_msm: Unknown symbol platform_get_irq (err 0) ci13xxx_msm: Unknown symbol device_unregister (err 0) ci13xxx_msm: Unknown symbol usb_add_gadget_udc (err 0) ci13xxx_msm: Unknown symbol put_device (err 0) ci13xxx_msm: Unknown symbol platform_driver_register (err 0) ci13xxx_msm: Unknown symbol platform_get_resource (err 0) ci13xxx_msm: Unknown symbol device_register (err 0) ci13xxx_msm: Unknown symbol usb_del_gadget_udc (err 0) This patch adds the missing MODULE_LICENSE statement with GPL v2 according to the header of the driver. Tested-by: Pavankumar Kondeti Signed-off-by: Marc Kleine-Budde Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 4eedfe5..1fc6129 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -122,3 +122,5 @@ static int __init ci13xxx_msm_init(void) return platform_driver_register(&ci13xxx_msm_driver); } module_init(ci13xxx_msm_init); + +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 73ef635a07c0e6a0a159d8beabffb83399429188 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:24:49 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: care pipe direction renesas_usbhs is caring pipe type and its direction. but current usbhs_endpoint_alloc() didn't check direction. this patch modify it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index b964f25..f8f612c 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -355,6 +355,7 @@ static void usbhsh_device_free(struct usbhsh_hpriv *hpriv, struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhsh_device *udev, struct usb_host_endpoint *ep, + int dir_in_req, gfp_t mem_flags) { struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); @@ -364,27 +365,38 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhs_pipe *pipe, *best_pipe; struct device *dev = usbhsh_hcd_to_dev(hcd); struct usb_endpoint_descriptor *desc = &ep->desc; - int type, i; + int type, i, dir_in; unsigned int min_usr; + dir_in_req = !!dir_in_req; + uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); if (!uep) { dev_err(dev, "usbhsh_ep alloc fail\n"); return NULL; } - type = usb_endpoint_type(desc); + + if (usb_endpoint_xfer_control(desc)) { + best_pipe = usbhsh_hpriv_to_dcp(hpriv); + goto usbhsh_endpoint_alloc_find_pipe; + } /* * find best pipe for endpoint * see * HARDWARE LIMITATION */ + type = usb_endpoint_type(desc); min_usr = ~0; best_pipe = NULL; - usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + usbhs_for_each_pipe(pipe, priv, i) { if (!usbhs_pipe_type_is(pipe, type)) continue; + dir_in = !!usbhs_pipe_is_dir_in(pipe); + if (0 != (dir_in - dir_in_req)) + continue; + info = usbhsh_pipe_info(pipe); if (min_usr > info->usr_cnt) { @@ -398,7 +410,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, kfree(uep); return NULL; } - +usbhsh_endpoint_alloc_find_pipe: /* * init uep */ @@ -430,7 +442,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, dev_dbg(dev, "%s [%d-%s](%p)\n", __func__, usbhsh_device_number(hpriv, udev), - usbhs_pipe_name(pipe), uep); + usbhs_pipe_name(uep->pipe), uep); return uep; } @@ -722,11 +734,11 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, struct usbhsh_device *udev, *new_udev = NULL; struct usbhs_pipe *pipe; struct usbhsh_ep *uep; + int is_dir_in = usb_pipein(urb->pipe); int ret; - dev_dbg(dev, "%s (%s)\n", - __func__, usb_pipein(urb->pipe) ? "in" : "out"); + dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) @@ -749,7 +761,8 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, */ uep = usbhsh_ep_to_uep(ep); if (!uep) { - uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags); + uep = usbhsh_endpoint_alloc(hpriv, udev, ep, + is_dir_in, mem_flags); if (!uep) goto usbhsh_urb_enqueue_error_free_device; } -- cgit v0.10.2 From 146ee50ae51c78fc93d025cb9528883df26ab705 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:25:07 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: disable irq when device stop Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index f8f612c..228f7b8 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1226,8 +1226,18 @@ static int usbhsh_stop(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct device *dev = usbhs_priv_to_dev(priv); + /* + * disable irq callback + */ + mod->irq_attch = NULL; + mod->irq_dtch = NULL; + mod->irq_sack = NULL; + mod->irq_sign = NULL; + usbhs_irq_callback_update(priv, mod); + usb_remove_hcd(hcd); /* disable sys */ -- cgit v0.10.2 From d7a00ec1a8debf74317c5110ded9918bad8de772 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Oct 2011 02:25:28 -0700 Subject: usb: gadget: renesas_usbhs: bugfix: set DATA0 when usbhsh_endpoint_alloc() new endpoint should start from DATA0, but mod_host didn't care it. This patch fix it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 228f7b8..bade761 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -435,6 +435,7 @@ usbhsh_endpoint_alloc_find_pipe: * see * DCPMAXP/PIPEMAXP */ + usbhs_pipe_sequence_data0(uep->pipe); usbhs_pipe_config_update(uep->pipe, usbhsh_device_number(hpriv, udev), usb_endpoint_num(desc), -- cgit v0.10.2 From 12d36c16bde3ee0643d705caa87723de536dbe49 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 3 Nov 2011 20:27:50 +0100 Subject: usb: dwc3: gadget: initialize max_streams Without this the gadget will never be able to allocate a stream capable endpoint. The manual says that the stream id is a 16bit id. It does not talk about an upper limit in any other way. So I think 15 is a reasonable limit :) Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index fa824cf..25dbd86 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1284,6 +1284,7 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) int ret; dep->endpoint.maxpacket = 1024; + dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, &dwc->gadget.ep_list); -- cgit v0.10.2 From ab570da26eec4e840dc1d18f45ab9d64bae49a5d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 10 Nov 2011 09:58:04 +0200 Subject: usb: musb: fix compilation breakage introduced by de47725 commit de47725 (include: replace linux/module.h with "struct module" wherever possible) introduced a compilation breaked when it removed from which musb glue layers were (mistakenly) relying on. Include that header to fix the compile error. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 08f1d0b6..e233d2b 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -27,6 +27,7 @@ */ #include +#include #include #include #include diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 4da7492..2613bfd 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -27,6 +27,7 @@ */ #include +#include #include #include #include -- cgit v0.10.2 From 54dc6cabe684375b3cf549c7b0545613d694aba8 Mon Sep 17 00:00:00 2001 From: Johannes Stezenbach Date: Mon, 14 Nov 2011 17:23:16 +0100 Subject: ASoC: sta32x: preserve coefficient RAM The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index bb82408..d2f3715 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -76,6 +76,8 @@ struct sta32x_priv { unsigned int mclk; unsigned int format; + + u32 coef_shadow[STA32X_COEF_COUNT]; }; static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1); @@ -227,6 +229,7 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); int numcoef = kcontrol->private_value >> 16; int index = kcontrol->private_value & 0xffff; unsigned int cfud; @@ -239,6 +242,11 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, snd_soc_write(codec, STA32X_CFUD, cfud); snd_soc_write(codec, STA32X_CFADDR2, index); + for (i = 0; i < numcoef && (index + i < STA32X_COEF_COUNT); i++) + sta32x->coef_shadow[index + i] = + (ucontrol->value.bytes.data[3 * i] << 16) + | (ucontrol->value.bytes.data[3 * i + 1] << 8) + | (ucontrol->value.bytes.data[3 * i + 2]); for (i = 0; i < 3 * numcoef; i++) snd_soc_write(codec, STA32X_B1CF1 + i, ucontrol->value.bytes.data[i]); @@ -252,6 +260,48 @@ static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, return 0; } +int sta32x_sync_coef_shadow(struct snd_soc_codec *codec) +{ + struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); + unsigned int cfud; + int i; + + /* preserve reserved bits in STA32X_CFUD */ + cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; + + for (i = 0; i < STA32X_COEF_COUNT; i++) { + snd_soc_write(codec, STA32X_CFADDR2, i); + snd_soc_write(codec, STA32X_B1CF1, + (sta32x->coef_shadow[i] >> 16) & 0xff); + snd_soc_write(codec, STA32X_B1CF2, + (sta32x->coef_shadow[i] >> 8) & 0xff); + snd_soc_write(codec, STA32X_B1CF3, + (sta32x->coef_shadow[i]) & 0xff); + /* chip documentation does not say if the bits are + * self-clearing, so do it explicitly */ + snd_soc_write(codec, STA32X_CFUD, cfud); + snd_soc_write(codec, STA32X_CFUD, cfud | 0x01); + } + return 0; +} + +int sta32x_cache_sync(struct snd_soc_codec *codec) +{ + unsigned int mute; + int rc; + + if (!codec->cache_sync) + return 0; + + /* mute during register sync */ + mute = snd_soc_read(codec, STA32X_MMUTE); + snd_soc_write(codec, STA32X_MMUTE, mute | STA32X_MMUTE_MMUTE); + sta32x_sync_coef_shadow(codec); + rc = snd_soc_cache_sync(codec); + snd_soc_write(codec, STA32X_MMUTE, mute); + return rc; +} + #define SINGLE_COEF(xname, index) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = sta32x_coefficient_info, \ @@ -661,7 +711,7 @@ static int sta32x_set_bias_level(struct snd_soc_codec *codec, return ret; } - snd_soc_cache_sync(codec); + sta32x_cache_sync(codec); } /* Power up to mute */ @@ -790,6 +840,17 @@ static int sta32x_probe(struct snd_soc_codec *codec) STA32X_CxCFG_OM_MASK, 2 << STA32X_CxCFG_OM_SHIFT); + /* initialize coefficient shadow RAM with reset values */ + for (i = 4; i <= 49; i += 5) + sta32x->coef_shadow[i] = 0x400000; + for (i = 50; i <= 54; i++) + sta32x->coef_shadow[i] = 0x7fffff; + sta32x->coef_shadow[55] = 0x5a9df7; + sta32x->coef_shadow[56] = 0x7fffff; + sta32x->coef_shadow[59] = 0x7fffff; + sta32x->coef_shadow[60] = 0x400000; + sta32x->coef_shadow[61] = 0x400000; + sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* Bias level configuration will have done an extra enable */ regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); diff --git a/sound/soc/codecs/sta32x.h b/sound/soc/codecs/sta32x.h index b97ee5a..d8e32a6 100644 --- a/sound/soc/codecs/sta32x.h +++ b/sound/soc/codecs/sta32x.h @@ -19,6 +19,7 @@ /* STA326 register addresses */ #define STA32X_REGISTER_COUNT 0x2d +#define STA32X_COEF_COUNT 62 #define STA32X_CONFA 0x00 #define STA32X_CONFB 0x01 -- cgit v0.10.2 From 583182ba5f02c8c9be82ea550f2051eaec15b975 Mon Sep 17 00:00:00 2001 From: Bart Hartgers Date: Wed, 26 Oct 2011 13:29:42 +0200 Subject: USB: ark3116 initialisation fix This patch for the usb serial ark3116 driver fixes an initialisation ordering bug that gets triggered on hotplug when using at least recent debian/ubuntu userspace. Without it, ark3116 serial cables don't work. Signed-off-by: Bart Hartgers Tested-by: law_ence.dev@ntlworld.com Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5cdb9d9..18e875b 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -42,7 +42,7 @@ static int debug; * Version information */ -#define DRIVER_VERSION "v0.6" +#define DRIVER_VERSION "v0.7" #define DRIVER_AUTHOR "Bart Hartgers " #define DRIVER_DESC "USB ARK3116 serial/IrDA driver" #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" @@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_out; } - /* setup termios */ - if (tty) - ark3116_set_termios(tty, port, NULL); - /* remove any data still left: also clears error state */ ark3116_read_reg(serial, UART_RX, buf); @@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) /* enable DMA */ ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); + err_out: kfree(buf); return result; -- cgit v0.10.2 From 97ff22ee3b4cb3a334f7385e269773141aed702f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 27 Oct 2011 11:20:21 -0400 Subject: USB: workaround for bug in old version of GCC This patch (as1491) works around a bug in GCC-3.4.6, which is still supposed to be supported. The number of microseconds in the udelay() call in quirk_usb_disable_ehci() is fixed at 100, but the compiler doesn't understand this and generates a link-time error. So we replace the otherwise unused variable "delta" with a simple constant 100. This same pattern is already used in other delay loops in that source file. Signed-off-by: Alan Stern Reported-by: Konrad Rzepecki Tested-by: Konrad Rzepecki Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 27a3dec..c7fd6ce 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -627,7 +627,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) void __iomem *base, *op_reg_base; u32 hcc_params, cap, val; u8 offset, cap_length; - int wait_time, delta, count = 256/4; + int wait_time, count = 256/4; if (!mmio_resource_enabled(pdev, 0)) return; @@ -673,11 +673,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) writel(val, op_reg_base + EHCI_USBCMD); wait_time = 2000; - delta = 100; do { writel(0x3f, op_reg_base + EHCI_USBSTS); - udelay(delta); - wait_time -= delta; + udelay(100); + wait_time -= 100; val = readl(op_reg_base + EHCI_USBSTS); if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { break; -- cgit v0.10.2 From f69e3120df82391a0ee8118e0a156239a06b2afb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 3 Nov 2011 11:37:10 -0400 Subject: USB: XHCI: resume root hubs when the controller resumes This patch (as1494) fixes a problem in xhci-hcd's resume routine. When the controller is runtime-resumed, this can only mean that one of the two root hubs has made a wakeup request and therefore needs to be resumed as well. Rather than try to determine which root hub requires attention (which might be difficult in the case where a new non-SuperSpeed device has been plugged in), the patch simply resumes both root hubs. Without this change, there is a race: The controller might be put back to sleep before it can activate its IRQ line, and the wakeup condition might never get handled. The patch also simplifies the logic in xhci_resume a little, combining some repeated flag settings into a single pair of statements. Signed-off-by: Alan Stern CC: Sarah Sharp Cc: stable Tested-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 747c5ea..aa94c01 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -799,7 +799,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; - int retval; + int retval = 0; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -809,6 +809,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci->bus_state[1].next_statechange)) msleep(100); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); + spin_lock_irq(&xhci->lock); if (xhci->quirks & XHCI_RESET_ON_RESUME) hibernated = true; @@ -878,20 +881,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); - if (retval) - goto failed_restart; - - xhci_dbg(xhci, "Start the secondary HCD\n"); - retval = xhci_run(secondary_hcd); if (!retval) { - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, - &xhci->shared_hcd->flags); + xhci_dbg(xhci, "Start the secondary HCD\n"); + retval = xhci_run(secondary_hcd); } -failed_restart: hcd->state = HC_STATE_SUSPENDED; xhci->shared_hcd->state = HC_STATE_SUSPENDED; - return retval; + goto done; } /* step 4: set Run/Stop bit */ @@ -910,11 +906,14 @@ failed_restart: * Running endpoints by ringing their doorbells */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); - spin_unlock_irq(&xhci->lock); - return 0; + + done: + if (retval == 0) { + usb_hcd_resume_root_hub(hcd); + usb_hcd_resume_root_hub(xhci->shared_hcd); + } + return retval; } #endif /* CONFIG_PM */ -- cgit v0.10.2 From 811c926c538f7e8d3c08b630dd5844efd7e000f6 Mon Sep 17 00:00:00 2001 From: Thomas Poussevin Date: Thu, 27 Oct 2011 18:46:48 +0200 Subject: USB: EHCI: fix HUB TT scheduling issue with iso transfer The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet Signed-off-by: Thomas Poussevin Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 2e829fa..56a3203 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1479,10 +1479,15 @@ iso_stream_schedule ( /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - /* find a uframe slot with enough bandwidth */ - next = start + period; - for (; start < next; start++) { - + /* find a uframe slot with enough bandwidth. + * Early uframes are more precious because full-speed + * iso IN transfers can't use late uframes, + * and therefore they should be allocated last. + */ + next = start; + start += period; + do { + start--; /* check schedule: enough space? */ if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, @@ -1495,7 +1500,7 @@ iso_stream_schedule ( start, sched, period)) break; } - } + } while (start > next); /* no room in the schedule */ if (start == next) { -- cgit v0.10.2 From 60c71ca972a2dd3fd9d0165b405361c8ad48349b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 26 Oct 2011 13:53:17 -0400 Subject: USB: add quirk for Logitech C600 web cam We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Cc: stable Signed-off-by: Josh Boyer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d6a8d82..caa1991 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -50,6 +50,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam B/C500 */ { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C600 */ + { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 5dc2470c602da8851907ec18942cd876c3b4ecc1 Mon Sep 17 00:00:00 2001 From: Havard Skinnemoen Date: Wed, 9 Nov 2011 13:47:38 -0800 Subject: USB: cdc-acm: Fix disconnect() vs close() race There's a race between the USB disconnect handler and the TTY close handler which may cause the acm object to be freed while it's still being used. This may lead to things like http://article.gmane.org/gmane.linux.usb.general/54250 and https://lkml.org/lkml/2011/5/29/64 This is the simplest fix I could come up with. Holding on to open_mutex while closing the TTY device prevents acm_disconnect() from freeing the acm object between acm->port.count drops to 0 and the TTY side of the cleanups are finalized. Signed-off-by: Havard Skinnemoen Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6960715..e8c564a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm) { int i; - mutex_lock(&open_mutex); if (acm->dev) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); @@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm) acm->control->needs_remote_wakeup = 0; usb_autopm_put_interface(acm->control); } - mutex_unlock(&open_mutex); } static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; tty_port_hangup(&acm->port); + mutex_lock(&open_mutex); acm_port_down(acm); + mutex_unlock(&open_mutex); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) @@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) shutdown */ if (!acm) return; + + mutex_lock(&open_mutex); if (tty_port_close_start(&acm->port, tty, filp) == 0) { - mutex_lock(&open_mutex); if (!acm->dev) { tty_port_tty_set(&acm->port, NULL); acm_tty_unregister(acm); @@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) acm_port_down(acm); tty_port_close_end(&acm->port, tty); tty_port_tty_set(&acm->port, NULL); + mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, -- cgit v0.10.2 From bc9f54498eadc5254378e376e8d2111cfd30b229 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 11 Nov 2011 13:10:08 +0100 Subject: PM / shmobile: Avoid restoring the INTCS state during initialization The SH7372 PM domain initialization routine calls pd_power_up() that executes the domain's .resume() callback, if present, and for the A4R domain this callback attepmts to restore the INTCS state from uninitialized data. To avoid that, introduce __pd_power_up() that will only execute the domain's .resume() callback if its second argument is 'true' and make the SH7372 PM domain initialization use it with 'false' as its second argument. Redefine pd_power_up() as a wrapper around __pd_power_up(). Reported-by: Guennadi Liakhovetski Tracked-down-by: Magnus Damm Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 78c98a8..1ec35eb 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -107,9 +107,8 @@ static int pd_power_down(struct generic_pm_domain *genpd) return 0; } -static int pd_power_up(struct generic_pm_domain *genpd) +static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume) { - struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); unsigned int mask = 1 << sh7372_pd->bit_shift; unsigned int retry_count; int ret = 0; @@ -138,12 +137,17 @@ static int pd_power_up(struct generic_pm_domain *genpd) mask, __raw_readl(PSTR)); out: - if (ret == 0 && sh7372_pd->resume) + if (ret == 0 && sh7372_pd->resume && do_resume) sh7372_pd->resume(); return ret; } +static int pd_power_up(struct generic_pm_domain *genpd) +{ + return __pd_power_up(to_sh7372_pd(genpd), true); +} + static void sh7372_a4r_suspend(void) { sh7372_intcs_suspend(); @@ -175,7 +179,7 @@ void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) genpd->active_wakeup = pd_active_wakeup; genpd->power_off = pd_power_down; genpd->power_on = pd_power_up; - genpd->power_on(&sh7372_pd->genpd); + __pd_power_up(sh7372_pd, false); } void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, -- cgit v0.10.2 From 9f3bdd4f937a75c4589a867dc1f8fefe09c1a618 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 14 Nov 2011 23:31:29 +0100 Subject: PM / devfreq: fix use after free in devfreq_remove_device In devfreq_remove_device, calling _remove_devfreq will also free devfreq. Don't dereference devfreq->governor->no_central_polling after _remove_devfreq. Signed-off-by: Axel Lin Acked-by: MyungJoo Ham Signed-off-by: Rafael J. Wysocki diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index d065925..59d24e9 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -418,10 +418,14 @@ out: */ int devfreq_remove_device(struct devfreq *devfreq) { + bool central_polling; + if (!devfreq) return -EINVAL; - if (!devfreq->governor->no_central_polling) { + central_polling = !devfreq->governor->no_central_polling; + + if (central_polling) { mutex_lock(&devfreq_list_lock); while (wait_remove_device == devfreq) { mutex_unlock(&devfreq_list_lock); @@ -433,7 +437,7 @@ int devfreq_remove_device(struct devfreq *devfreq) mutex_lock(&devfreq->lock); _remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */ - if (!devfreq->governor->no_central_polling) + if (central_polling) mutex_unlock(&devfreq_list_lock); return 0; -- cgit v0.10.2 From 6c81f90588972b8631bda4d538ffd0199a3e1b41 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Mon, 14 Nov 2011 23:31:35 +0100 Subject: PM / devfreq: correct Kconfig dependency Devfreq does not depend on OPP. The dependency is removed. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Rafael J. Wysocki diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 643b055..8f04910 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -1,36 +1,29 @@ -config ARCH_HAS_DEVFREQ - bool - depends on ARCH_HAS_OPP - help - Denotes that the architecture supports DEVFREQ. If the architecture - supports multiple OPP entries per device and the frequency of the - devices with OPPs may be altered dynamically, the architecture - supports DEVFREQ. - menuconfig PM_DEVFREQ bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" - depends on PM_OPP && ARCH_HAS_DEVFREQ help - With OPP support, a device may have a list of frequencies and - voltages available. DEVFREQ, a generic DVFS framework can be - registered for a device with OPP support in order to let the - governor provided to DEVFREQ choose an operating frequency - based on the OPP's list and the policy given with DEVFREQ. + A device may have a list of frequencies and voltages available. + devfreq, a generic DVFS framework can be registered for a device + in order to let the governor provided to devfreq choose an + operating frequency based on the device driver's policy. - Each device may have its own governor and policy. DEVFREQ can + Each device may have its own governor and policy. Devfreq can reevaluate the device state periodically and/or based on the - OPP list changes (each frequency/voltage pair in OPP may be - disabled or enabled). + notification to "nb", a notifier block, of devfreq. - Like some CPUs with CPUFREQ, a device may have multiple clocks. + Like some CPUs with CPUfreq, a device may have multiple clocks. However, because the clock frequencies of a single device are - determined by the single device's state, an instance of DEVFREQ + determined by the single device's state, an instance of devfreq is attached to a single device and returns a "representative" - clock frequency from the OPP of the device, which is also attached - to a device by 1-to-1. The device registering DEVFREQ takes the - responsiblity to "interpret" the frequency listed in OPP and + clock frequency of the device, which is also attached + to a device by 1-to-1. The device registering devfreq takes the + responsiblity to "interpret" the representative frequency and to set its every clock accordingly with the "target" callback - given to DEVFREQ. + given to devfreq. + + When OPP is used with the devfreq device, it is recommended to + register devfreq's nb to the OPP's notifier head. If OPP is + used with the devfreq device, you may use OPP helper + functions defined in devfreq.h. if PM_DEVFREQ -- cgit v0.10.2 From 770f0baaee0c511d0d466082e72815ed861e301f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 12 Nov 2011 16:46:13 +0100 Subject: USB: at91: at91-ohci: fix set/get power in commit aa6e52a35 we introduce the support of overcurrent notification but the set and get of the power without checking if the gpio is valid or not Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Thomas Petazzoni Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index ba3a46b..95a9fec 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -223,6 +223,9 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (port < 0 || port >= 2) return; + if (pdata->vbus_pin[port] <= 0) + return; + gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); } @@ -231,6 +234,9 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (port < 0 || port >= 2) return -EINVAL; + if (pdata->vbus_pin[port] <= 0) + return -EINVAL; + return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; } -- cgit v0.10.2 From 8981d76a2cf4c46333d9a18176a6eee337a71146 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 7 Nov 2011 16:58:20 +0800 Subject: powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit Below are codes for accessing usb sysif_regs in driver: usb_sys_regs = (struct usb_sys_interface *) ((u32)dr_regs + USB_DR_SYS_OFFSET); these codes work in 32-bit, but in 64-bit, use u32 to type cast the address of ioremap is not right, and accessing members of 'usb_sys_regs' will cause call trace, so use (void *) for both 32-bit and 64-bit. Signed-off-by: Shaohui Xie Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d786ba3..b3b3d83 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2480,8 +2480,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) - usb_sys_regs = (struct usb_sys_interface *) - ((u32)dr_regs + USB_DR_SYS_OFFSET); + usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET; #endif /* Initialize USB clocks */ -- cgit v0.10.2 From 46e642614b360ae783ce32b43dd885b797352635 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 30 Oct 2011 07:34:04 -0700 Subject: MAINTAINERS: add CHAR and MISC driver maintainers Yes, we are fools, but humor us. Signed-off-by: Greg Kroah-Hartman Acked-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..c9c0643 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1788,6 +1788,14 @@ F: include/net/cfg80211.h F: net/wireless/* X: net/wireless/wext* +CHAR and MISC DRIVERS +M: Arnd Bergmann +M: Greg Kroah-Hartman +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git +S: Maintained +F: drivers/char/* +F: drivers/misc/* + CHECKPATCH M: Andy Whitcroft S: Supported -- cgit v0.10.2 From 161f14191dc166c4e3f37f68af1bc199c6868b7d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 10:20:28 +0800 Subject: pcie-gadget-spear: Add "platform:" prefix for platform modalias Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin Acked-by: Pratyush Anand Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c index cfbddbe..43d073b 100644 --- a/drivers/misc/spear13xx_pcie_gadget.c +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void) } module_exit(spear_pcie_gadget_exit); -MODULE_ALIAS("pcie-gadget-spear"); +MODULE_ALIAS("platform:pcie-gadget-spear"); MODULE_AUTHOR("Pratyush Anand"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 0d145d7d4a241c321c832a810bb6edad18e2217b Mon Sep 17 00:00:00 2001 From: sordna Date: Thu, 27 Oct 2011 21:06:26 -0700 Subject: USB: quirks: adding more quirky webcams to avoid squeaky audio The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index caa1991..ecf12e1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -56,12 +56,36 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C905 */ + { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C210 */ + { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C260 */ + { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C310 */ { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C910 */ + { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C160 */ + { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Pro 9000 */ + { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam E3500 */ + { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Vision Pro */ + { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit v0.10.2 From 2f640bf4c94324aeaa1b6385c10aab8c5ad1e1cf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Oct 2011 10:50:58 -0400 Subject: usb-storage: Accept 8020i-protocol commands longer than 12 bytes The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands; shorter commands must be padded. Simon Detheridge reports that his 3-TB USB disk drive claims to use the 8020i protocol (which is normally meant for ATAPI devices like CD drives), and because of its large size, the disk drive requires the use of 16-byte commands. However the usb_stor_pad12_command() routine in usb-storage always sets the command length to 12, making the drive impossible to use. Since the SFF-8020i specification allows for 16-byte commands in future extensions, we may as well accept them. This patch (as1490) changes usb_stor_pad12_command() to leave commands larger than 12 bytes alone rather than truncating them. Signed-off-by: Alan Stern Tested-by: Simon Detheridge CC: Matthew Dharm Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 93c1a4d..82dd834 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -59,7 +59,9 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) { - /* Pad the SCSI command with zeros out to 12 bytes + /* + * Pad the SCSI command with zeros out to 12 bytes. If the + * command already is 12 bytes or longer, leave it alone. * * NOTE: This only works because a scsi_cmnd struct field contains * a unsigned char cmnd[16], so we know we have storage available @@ -67,9 +69,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) for (; srb->cmd_len<12; srb->cmd_len++) srb->cmnd[srb->cmd_len] = 0; - /* set command length to 12 bytes */ - srb->cmd_len = 12; - /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } -- cgit v0.10.2 From eec205719e97c95a422d0aa384d0517f6c74fc0a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 14 Nov 2011 14:08:05 +0000 Subject: net/packet: Revert incorrect dead-code changes to prb_setup_retire_blk_timer Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ab10e84..82a6f34 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -516,11 +516,13 @@ static void prb_init_blk_timer(struct packet_sock *po, static void prb_setup_retire_blk_timer(struct packet_sock *po, int tx_ring) { + struct tpacket_kbdq_core *pkc; + if (tx_ring) BUG(); - prb_init_blk_timer(po, &po->rx_ring.prb_bdqc, - prb_retire_rx_blk_timer_expired); + pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc; + prb_init_blk_timer(po, pkc, prb_retire_rx_blk_timer_expired); } static int prb_calc_retire_blk_tmo(struct packet_sock *po, -- cgit v0.10.2 From 1d299bc7732c34d85bd43ac1a8745f5a2fed2078 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 14 Nov 2011 20:32:16 -0800 Subject: sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls. Although we provide a proper way for a debugger to control whether syscall restart occurs, we run into problems because orig_i0 is not saved and restored properly. Luckily we can solve this problem without having to make debuggers aware of the issue. Across system calls, several registers are considered volatile and can be safely clobbered. Therefore we use the pt_regs save area of one of those registers, %g2, as a place to save and restore orig_i0. Debuggers transparently will do the right thing because they save and restore this register already. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 2caa556..2e86fd1 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -822,21 +822,23 @@ static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -void do_signal32(sigset_t *oldset, struct pt_regs * regs, - int restart_syscall, unsigned long orig_i0) +void do_signal32(sigset_t *oldset, struct pt_regs * regs) { struct k_sigaction ka; + unsigned long orig_i0; + int restart_syscall; siginfo_t info; int signr; signr = get_signal_to_deliver(&info, &ka, regs, NULL); - /* If the debugger messes with the program counter, it clears - * the "in syscall" bit, directing us to not perform a syscall - * restart. - */ - if (restart_syscall && !pt_regs_is_syscall(regs)) - restart_syscall = 0; + restart_syscall = 0; + orig_i0 = 0; + if (pt_regs_is_syscall(regs) && + (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { + restart_syscall = 1; + orig_i0 = regs->u_regs[UREG_G2]; + } if (signr > 0) { if (restart_syscall) diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 8ce247a..7dfaff6 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -519,10 +519,16 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) siginfo_t info; int signr; + /* It's a lot of work and synchronization to add a new ptrace + * register for GDB to save and restore in order to get + * orig_i0 correct for syscall restarts when debugging. + * + * However, we luckily can use the fact that several registers + * are volatile across system calls. One such register is + * %g2, so use that as a place to save away orig_i0. + */ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) - restart_syscall = 1; - else - restart_syscall = 0; + regs->u_regs[UREG_G2] = orig_i0; if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; @@ -535,8 +541,12 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * the software "in syscall" bit, directing us to not perform * a syscall restart. */ - if (restart_syscall && !pt_regs_is_syscall(regs)) - restart_syscall = 0; + restart_syscall = 0; + if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) { + restart_syscall = 1; + orig_i0 = regs->u_regs[UREG_G2]; + } + if (signr > 0) { if (restart_syscall) diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index a2b8159..1ddf0de 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -529,11 +529,17 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) siginfo_t info; int signr; + /* It's a lot of work and synchronization to add a new ptrace + * register for GDB to save and restore in order to get + * orig_i0 correct for syscall restarts when debugging. + * + * However, we luckily can use the fact that several registers + * are volatile across system calls. One such register is + * %g2, so use that as a place to save away orig_i0. + */ if (pt_regs_is_syscall(regs) && - (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { - restart_syscall = 1; - } else - restart_syscall = 0; + (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) + regs->u_regs[UREG_G2] = orig_i0; if (current_thread_info()->status & TS_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; @@ -542,22 +548,20 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) #ifdef CONFIG_COMPAT if (test_thread_flag(TIF_32BIT)) { - extern void do_signal32(sigset_t *, struct pt_regs *, - int restart_syscall, - unsigned long orig_i0); - do_signal32(oldset, regs, restart_syscall, orig_i0); + extern void do_signal32(sigset_t *, struct pt_regs *); + do_signal32(oldset, regs); return; } #endif signr = get_signal_to_deliver(&info, &ka, regs, NULL); - /* If the debugger messes with the program counter, it clears - * the software "in syscall" bit, directing us to not perform - * a syscall restart. - */ - if (restart_syscall && !pt_regs_is_syscall(regs)) - restart_syscall = 0; + restart_syscall = 0; + if (pt_regs_is_syscall(regs) && + (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { + restart_syscall = 1; + orig_i0 = regs->u_regs[UREG_G2]; + } if (signr > 0) { if (restart_syscall) -- cgit v0.10.2 From 7db3eba6bf84ab744e39dcce24b7e06d01bab913 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Tue, 18 Oct 2011 16:58:05 +0900 Subject: drm/exynos: added kms poll for handling hpd event this patch adds kms poll infrastructure to handle hotplug detection event Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 83810cb..53e2216 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -27,6 +27,7 @@ #include "drmP.h" #include "drm.h" +#include "drm_crtc_helper.h" #include @@ -61,6 +62,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags) drm_mode_config_init(dev); + /* init kms poll for handling hpd */ + drm_kms_helper_poll_init(dev); + exynos_drm_mode_config_init(dev); /* @@ -116,6 +120,7 @@ static int exynos_drm_unload(struct drm_device *dev) exynos_drm_fbdev_fini(dev); exynos_drm_device_unregister(dev); drm_vblank_cleanup(dev); + drm_kms_helper_poll_fini(dev); drm_mode_config_cleanup(dev); kfree(dev->dev_private); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 48d29cf..7d91a54 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -29,7 +29,9 @@ #include "drmP.h" #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include "drm_fb_helper.h" +#include "exynos_drm_drv.h" #include "exynos_drm_fb.h" #include "exynos_drm_buf.h" #include "exynos_drm_gem.h" @@ -238,8 +240,18 @@ struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) return entry; } +static void exynos_drm_output_poll_changed(struct drm_device *dev) +{ + struct exynos_drm_private *private = dev->dev_private; + struct drm_fb_helper *fb_helper = private->fb_helper; + + if (fb_helper) + drm_fb_helper_hotplug_event(fb_helper); +} + static struct drm_mode_config_funcs exynos_drm_mode_config_funcs = { .fb_create = exynos_drm_fb_create, + .output_poll_changed = exynos_drm_output_poll_changed, }; void exynos_drm_mode_config_init(struct drm_device *dev) -- cgit v0.10.2 From 1b17b206560c433ae9e8f8409f3f3842949a74c8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 19 Oct 2011 15:10:10 +0900 Subject: drm/exynos: fixed connector flag with hpd and interlace scan for hdmi hdmi display in exynos supports hotplug event and interlace scan mode Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 985d9e7..d1a459f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -254,6 +254,8 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, switch (manager->display->type) { case EXYNOS_DISPLAY_TYPE_HDMI: type = DRM_MODE_CONNECTOR_HDMIA; + connector->interlace_allowed = true; + connector->polled = DRM_CONNECTOR_POLL_HPD; break; default: type = DRM_MODE_CONNECTOR_Unknown; -- cgit v0.10.2 From 8b58dfe0290cb57e3f8601b197f00c23fa39a60d Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 19 Oct 2011 15:11:55 +0900 Subject: drm/exynos: fixed converting between display mode and timing missing members are added into converting function between timing and display mode and refresh rate of display mode is calculated by drm mode function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d1a459f..7ca1274 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -47,6 +47,7 @@ convert_to_display_mode(struct drm_display_mode *mode, DRM_DEBUG_KMS("%s\n", __FILE__); mode->clock = timing->pixclock / 1000; + mode->vrefresh = timing->refresh; mode->hdisplay = timing->xres; mode->hsync_start = mode->hdisplay + timing->left_margin; @@ -57,6 +58,12 @@ convert_to_display_mode(struct drm_display_mode *mode, mode->vsync_start = mode->vdisplay + timing->upper_margin; mode->vsync_end = mode->vsync_start + timing->vsync_len; mode->vtotal = mode->vsync_end + timing->lower_margin; + + if (timing->vmode & FB_VMODE_INTERLACED) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timing->vmode & FB_VMODE_DOUBLE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; } /* convert drm_display_mode to exynos_video_timings */ @@ -69,7 +76,7 @@ convert_to_video_timing(struct fb_videomode *timing, memset(timing, 0, sizeof(*timing)); timing->pixclock = mode->clock * 1000; - timing->refresh = mode->vrefresh; + timing->refresh = drm_mode_vrefresh(mode); timing->xres = mode->hdisplay; timing->left_margin = mode->hsync_start - mode->hdisplay; -- cgit v0.10.2 From adb6b1596743e93e50fad2ff26d9604cda4361ab Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 19 Oct 2011 17:16:55 +0900 Subject: drm/exynos: added manager object to connector connector contains some contents for display controller so the connector also should be able to access controller through manager. Signed-off-by: Inki Dae Signed-off-by: Seung-Woo Kim Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 7ca1274..d33f803 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -37,6 +37,8 @@ struct exynos_drm_connector { struct drm_connector drm_connector; + uint32_t encoder_id; + struct exynos_drm_manager *manager; }; /* convert exynos_video_timings to drm_display_mode */ @@ -99,8 +101,9 @@ convert_to_video_timing(struct fb_videomode *timing, static int exynos_drm_connector_get_modes(struct drm_connector *connector) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; unsigned int count; @@ -169,8 +172,9 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; struct fb_videomode timing; int ret = MODE_BAD; @@ -188,9 +192,25 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct drm_encoder *exynos_drm_best_encoder(struct drm_connector *connector) { + struct drm_device *dev = connector->dev; + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct drm_mode_object *obj; + struct drm_encoder *encoder; + DRM_DEBUG_KMS("%s\n", __FILE__); - return connector->encoder; + obj = drm_mode_object_find(dev, exynos_connector->encoder_id, + DRM_MODE_OBJECT_ENCODER); + if (!obj) { + DRM_DEBUG_KMS("Unknown ENCODER ID %d\n", + exynos_connector->encoder_id); + return NULL; + } + + encoder = obj_to_encoder(obj); + + return encoder; } static struct drm_connector_helper_funcs exynos_connector_helper_funcs = { @@ -203,8 +223,9 @@ static struct drm_connector_helper_funcs exynos_connector_helper_funcs = { static enum drm_connector_status exynos_drm_connector_detect(struct drm_connector *connector, bool force) { - struct exynos_drm_manager *manager = - exynos_drm_get_manager(connector->encoder); + struct exynos_drm_connector *exynos_connector = + to_exynos_connector(connector); + struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display *display = manager->display; enum drm_connector_status status = connector_status_disconnected; @@ -276,7 +297,10 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, if (err) goto err_connector; + exynos_connector->encoder_id = encoder->base.id; + exynos_connector->manager = manager; connector->encoder = encoder; + err = drm_mode_connector_attach_encoder(connector, encoder); if (err) { DRM_ERROR("failed to attach a connector to a encoder\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 7cf6fa8..4e5535b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -58,7 +58,8 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display *display = + manager->display; if (display && display->power_on) display->power_on(manager->dev, mode); -- cgit v0.10.2 From 74ccc539bcebdb24afb74194223f92a96a7285ed Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 19 Oct 2011 17:23:07 +0900 Subject: drm/exynos: changed exynos_drm_display to exynos_drm_display_ops exynos_drm_display has function pointes so exynos_drm_display_ops is better to describe. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d33f803..d620b07 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -104,13 +104,13 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = manager->display_ops; unsigned int count; DRM_DEBUG_KMS("%s\n", __FILE__); - if (!display) { - DRM_DEBUG_KMS("display is null.\n"); + if (!display_ops) { + DRM_DEBUG_KMS("display_ops is null.\n"); return 0; } @@ -122,7 +122,7 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) * P.S. in case of lcd panel, count is always 1 if success * because lcd panel has only one mode. */ - if (display->get_edid) { + if (display_ops->get_edid) { int ret; void *edid; @@ -132,7 +132,7 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) return 0; } - ret = display->get_edid(manager->dev, connector, + ret = display_ops->get_edid(manager->dev, connector, edid, MAX_EDID); if (ret < 0) { DRM_ERROR("failed to get edid data.\n"); @@ -150,8 +150,8 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) struct drm_display_mode *mode = drm_mode_create(connector->dev); struct fb_videomode *timing; - if (display->get_timing) - timing = display->get_timing(manager->dev); + if (display_ops->get_timing) + timing = display_ops->get_timing(manager->dev); else { drm_mode_destroy(connector->dev, mode); return 0; @@ -175,7 +175,7 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = manager->display_ops; struct fb_videomode timing; int ret = MODE_BAD; @@ -183,8 +183,8 @@ static int exynos_drm_connector_mode_valid(struct drm_connector *connector, convert_to_video_timing(&timing, mode); - if (display && display->check_timing) - if (!display->check_timing(manager->dev, (void *)&timing)) + if (display_ops && display_ops->check_timing) + if (!display_ops->check_timing(manager->dev, (void *)&timing)) ret = MODE_OK; return ret; @@ -226,13 +226,14 @@ exynos_drm_connector_detect(struct drm_connector *connector, bool force) struct exynos_drm_connector *exynos_connector = to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; - struct exynos_drm_display *display = manager->display; + struct exynos_drm_display_ops *display_ops = + manager->display_ops; enum drm_connector_status status = connector_status_disconnected; DRM_DEBUG_KMS("%s\n", __FILE__); - if (display && display->is_connected) { - if (display->is_connected(manager->dev)) + if (display_ops && display_ops->is_connected) { + if (display_ops->is_connected(manager->dev)) status = connector_status_connected; else status = connector_status_disconnected; @@ -279,7 +280,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, connector = &exynos_connector->drm_connector; - switch (manager->display->type) { + switch (manager->display_ops->type) { case EXYNOS_DISPLAY_TYPE_HDMI: type = DRM_MODE_CONNECTOR_HDMIA; connector->interlace_allowed = true; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index c03683f..1575e5f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -130,7 +130,7 @@ struct exynos_drm_overlay { * @check_timing: check if timing is valid or not. * @power_on: display device on or off. */ -struct exynos_drm_display { +struct exynos_drm_display_ops { enum exynos_drm_output_type type; bool (*is_connected)(struct device *dev); int (*get_edid)(struct device *dev, struct drm_connector *connector, @@ -178,7 +178,7 @@ struct exynos_drm_manager { int pipe; struct exynos_drm_manager_ops *ops; struct exynos_drm_overlay_ops *overlay_ops; - struct exynos_drm_display *display; + struct exynos_drm_display_ops *display_ops; }; /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 4e5535b..0034fa7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -58,11 +58,11 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { - struct exynos_drm_display *display = - manager->display; + struct exynos_drm_display_ops *display_ops = + manager->display_ops; - if (display && display->power_on) - display->power_on(manager->dev, mode); + if (display_ops && display_ops->power_on) + display_ops->power_on(manager->dev, mode); } } } diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 4659c88..f2d883f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -124,7 +124,7 @@ static int fimd_display_power_on(struct device *dev, int mode) return 0; } -static struct exynos_drm_display fimd_display = { +static struct exynos_drm_display_ops fimd_display_ops = { .type = EXYNOS_DISPLAY_TYPE_LCD, .is_connected = fimd_display_is_connected, .get_timing = fimd_get_timing, @@ -731,7 +731,7 @@ static int __devinit fimd_probe(struct platform_device *pdev) subdrv->manager.pipe = -1; subdrv->manager.ops = &fimd_manager_ops; subdrv->manager.overlay_ops = &fimd_overlay_ops; - subdrv->manager.display = &fimd_display; + subdrv->manager.display_ops = &fimd_display_ops; subdrv->manager.dev = dev; platform_set_drvdata(pdev, ctx); -- cgit v0.10.2 From 84b46990cb2caf8efe20d5626e1d7e2e40bab832 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 4 Nov 2011 13:41:46 +0900 Subject: drm/exynos: restored kernel_fb_list when reiniting fb_helper during recreating exynos_drm_fbdev as a new display device probes, fb_helper is reinitialized but kernel fb is not changed so kernel_fb_list should be restored after fb_helper is reinitialized. Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 1f4b3d1..74092a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -405,6 +405,18 @@ int exynos_drm_fbdev_reinit(struct drm_device *dev) fb_helper = private->fb_helper; if (fb_helper) { + struct list_head temp_list; + + INIT_LIST_HEAD(&temp_list); + + /* + * fb_helper is reintialized but kernel fb is reused + * so kernel_fb_list need to be backuped and restored + */ + if (!list_empty(&fb_helper->kernel_fb_list)) + list_replace_init(&fb_helper->kernel_fb_list, + &temp_list); + drm_fb_helper_fini(fb_helper); ret = drm_fb_helper_init(dev, fb_helper, @@ -414,6 +426,9 @@ int exynos_drm_fbdev_reinit(struct drm_device *dev) return ret; } + if (!list_empty(&temp_list)) + list_replace(&temp_list, &fb_helper->kernel_fb_list); + ret = drm_fb_helper_single_add_all_connectors(fb_helper); if (ret < 0) { DRM_ERROR("failed to add fb helper to connectors\n"); -- cgit v0.10.2 From aa6b2b6cd43e4a23c2a220382a8b385b087d8bca Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Fri, 4 Nov 2011 13:44:38 +0900 Subject: drm/exynos: removed meaningless parameter from fbdev update drm_framebuffer already has width and height so they are meaningless as parameters when updating fb_info. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 74092a8..0effd77 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -85,15 +85,13 @@ static struct fb_ops exynos_drm_fb_ops = { }; static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, - struct drm_framebuffer *fb, - unsigned int fb_width, - unsigned int fb_height) + struct drm_framebuffer *fb) { struct fb_info *fbi = helper->fbdev; struct drm_device *dev = helper->dev; struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper); struct exynos_drm_buf_entry *entry; - unsigned int size = fb_width * fb_height * (fb->bits_per_pixel >> 3); + unsigned int size = fb->width * fb->height * (fb->bits_per_pixel >> 3); unsigned long offset; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -101,7 +99,7 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, exynos_fb->fb = fb; drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); - drm_fb_helper_fill_var(fbi, helper, fb_width, fb_height); + drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height); entry = exynos_drm_fb_get_buf(fb); if (!entry) { @@ -171,8 +169,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, goto out; } - ret = exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width, - sizes->fb_height); + ret = exynos_drm_fbdev_update(helper, helper->fb); if (ret < 0) fb_dealloc_cmap(&fbi->cmap); @@ -235,8 +232,7 @@ static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper, } helper->fb = exynos_fbdev->fb; - return exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width, - sizes->fb_height); + return exynos_drm_fbdev_update(helper, helper->fb); } static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, -- cgit v0.10.2 From d2716c896d305fb5d3d0d7f58394c17841ed2967 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 4 Nov 2011 17:04:45 +0900 Subject: drm/exynos: added crtc dpms for disable crtc crtc dpms is called as destroying attached fb so dpms off sould be processed. crtc dpms also can be called after crtc is detached from encoder so pipe value of manager is used to find display controller for this case Signed-off-by: Joonyoung Shim Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 9337e5e..b1d6526 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -85,7 +85,8 @@ static void exynos_drm_crtc_apply(struct drm_crtc *crtc) exynos_drm_fn_encoder(crtc, overlay, exynos_drm_encoder_crtc_mode_set); - exynos_drm_fn_encoder(crtc, NULL, exynos_drm_encoder_crtc_commit); + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); } static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, @@ -171,9 +172,26 @@ static int exynos_drm_crtc_update(struct drm_crtc *crtc) static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) { - DRM_DEBUG_KMS("%s\n", __FILE__); + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); - /* TODO */ + DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode); + + switch (mode) { + case DRM_MODE_DPMS_ON: + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + /* TODO */ + exynos_drm_fn_encoder(crtc, NULL, + exynos_drm_encoder_crtc_disable); + break; + default: + DRM_DEBUG_KMS("unspecified mode %d\n", mode); + break; + } } static void exynos_drm_crtc_prepare(struct drm_crtc *crtc) @@ -185,9 +203,12 @@ static void exynos_drm_crtc_prepare(struct drm_crtc *crtc) static void exynos_drm_crtc_commit(struct drm_crtc *crtc) { + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); + DRM_DEBUG_KMS("%s\n", __FILE__); - /* drm framework doesn't check NULL. */ + exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe, + exynos_drm_encoder_crtc_commit); } static bool diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 0034fa7..f15da95 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -61,6 +61,8 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) struct exynos_drm_display_ops *display_ops = manager->display_ops; + DRM_DEBUG_KMS("connector[%d] dpms[%d]\n", + connector->base.id, mode); if (display_ops && display_ops->power_on) display_ops->power_on(manager->dev, mode); } @@ -117,15 +119,11 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder) { struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); struct exynos_drm_manager_ops *manager_ops = manager->ops; - struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; DRM_DEBUG_KMS("%s\n", __FILE__); if (manager_ops && manager_ops->commit) manager_ops->commit(manager->dev); - - if (overlay_ops && overlay_ops->commit) - overlay_ops->commit(manager->dev); } static struct drm_crtc * @@ -209,10 +207,23 @@ void exynos_drm_fn_encoder(struct drm_crtc *crtc, void *data, { struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; + struct exynos_drm_private *private = dev->dev_private; + struct exynos_drm_manager *manager; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - if (encoder->crtc != crtc) - continue; + /* + * if crtc is detached from encoder, check pipe, + * otherwise check crtc attached to encoder + */ + if (!encoder->crtc) { + manager = to_exynos_encoder(encoder)->manager; + if (manager->pipe < 0 || + private->crtc[manager->pipe] != crtc) + continue; + } else { + if (encoder->crtc != crtc) + continue; + } fn(encoder, data); } @@ -251,8 +262,18 @@ void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data) struct exynos_drm_manager *manager = to_exynos_encoder(encoder)->manager; struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; + int crtc = *(int *)data; + + DRM_DEBUG_KMS("%s\n", __FILE__); - overlay_ops->commit(manager->dev); + /* + * when crtc is detached from encoder, this pipe is used + * to select manager operation + */ + manager->pipe = crtc; + + if (overlay_ops && overlay_ops->commit) + overlay_ops->commit(manager->dev); } void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) @@ -265,6 +286,25 @@ void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) overlay_ops->mode_set(manager->dev, overlay); } +void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) +{ + struct exynos_drm_manager *manager = + to_exynos_encoder(encoder)->manager; + struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; + + DRM_DEBUG_KMS("\n"); + + overlay_ops->disable(manager->dev); + + /* + * crtc is already detached from encoder and last + * function for detaching is properly done, so + * clear pipe from manager to prevent repeated call + */ + if (!encoder->crtc) + manager->pipe = -1; +} + MODULE_AUTHOR("Inki Dae "); MODULE_AUTHOR("Joonyoung Shim "); MODULE_AUTHOR("Seung-Woo Kim "); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h index 5ecd645..a22acfb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h @@ -41,5 +41,6 @@ void exynos_drm_enable_vblank(struct drm_encoder *encoder, void *data); void exynos_drm_disable_vblank(struct drm_encoder *encoder, void *data); void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data); void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data); +void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data); #endif -- cgit v0.10.2 From b0e0f85631f9d905095d2896a952430f5eb0aba1 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Fri, 4 Nov 2011 17:31:41 +0900 Subject: drm/exynos: checked for null pointer Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index f15da95..866f419 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -283,7 +283,8 @@ void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data) struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops; struct exynos_drm_overlay *overlay = data; - overlay_ops->mode_set(manager->dev, overlay); + if (overlay_ops && overlay_ops->mode_set) + overlay_ops->mode_set(manager->dev, overlay); } void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) @@ -294,7 +295,8 @@ void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data) DRM_DEBUG_KMS("\n"); - overlay_ops->disable(manager->dev); + if (overlay_ops && overlay_ops->disable) + overlay_ops->disable(manager->dev); /* * crtc is already detached from encoder and last -- cgit v0.10.2 From f088d5a9c5dd22b6559fa3f3939973bc374c977b Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 14:51:23 +0900 Subject: drm/exynos: use gem create function generically this patch addes exynos_drm_gem_init() creating and initialzing a gem. allocation functions could use this function to create new gem and it changes size type of exynos_drm_gem_create structure to 64bit and also corrects comments to exynos_drm_gem_create structure. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 7d91a54..8d0f662 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -165,9 +165,9 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, goto out; } else { - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, - size, - &mode_cmd->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, + &mode_cmd->handle, + size); if (IS_ERR(exynos_gem_obj)) { ret = PTR_ERR(exynos_gem_obj); goto err_buffer; diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index a8e7a88..bd6ede8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -62,40 +62,28 @@ static unsigned int get_gem_mmap_offset(struct drm_gem_object *obj) return (unsigned int)obj->map_list.hash.key << PAGE_SHIFT; } -struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv, - struct drm_device *dev, unsigned int size, - unsigned int *handle) +static struct exynos_drm_gem_obj + *exynos_drm_gem_init(struct drm_device *drm_dev, + struct drm_file *file_priv, unsigned int *handle, + unsigned int size) { struct exynos_drm_gem_obj *exynos_gem_obj; - struct exynos_drm_buf_entry *entry; struct drm_gem_object *obj; int ret; - DRM_DEBUG_KMS("%s\n", __FILE__); - - size = roundup(size, PAGE_SIZE); - exynos_gem_obj = kzalloc(sizeof(*exynos_gem_obj), GFP_KERNEL); if (!exynos_gem_obj) { DRM_ERROR("failed to allocate exynos gem object.\n"); return ERR_PTR(-ENOMEM); } - /* allocate the new buffer object and memory region. */ - entry = exynos_drm_buf_create(dev, size); - if (!entry) { - kfree(exynos_gem_obj); - return ERR_PTR(-ENOMEM); - } - - exynos_gem_obj->entry = entry; - obj = &exynos_gem_obj->base; - ret = drm_gem_object_init(dev, obj, size); + ret = drm_gem_object_init(drm_dev, obj, size); if (ret < 0) { - DRM_ERROR("failed to initailize gem object.\n"); - goto err_obj_init; + DRM_ERROR("failed to initialize gem object.\n"); + ret = -EINVAL; + goto err_object_init; } DRM_DEBUG_KMS("created file object = 0x%x\n", (unsigned int)obj->filp); @@ -127,24 +115,55 @@ err_handle_create: err_create_mmap_offset: drm_gem_object_release(obj); -err_obj_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); - +err_object_init: kfree(exynos_gem_obj); return ERR_PTR(ret); } +struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, + struct drm_file *file_priv, + unsigned int *handle, unsigned long size) +{ + + struct exynos_drm_gem_obj *exynos_gem_obj = NULL; + struct exynos_drm_buf_entry *entry; + int ret; + + size = roundup(size, PAGE_SIZE); + + DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); + + entry = exynos_drm_buf_create(dev, size); + if (!entry) + return ERR_PTR(-ENOMEM); + + exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); + if (IS_ERR(exynos_gem_obj)) { + ret = PTR_ERR(exynos_gem_obj); + goto err_gem_init; + } + + exynos_gem_obj->entry = entry; + + return exynos_gem_obj; + +err_gem_init: + exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); + + return ERR_PTR(ret); +} + int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) + struct drm_file *file_priv) { struct drm_exynos_gem_create *args = data; - struct exynos_drm_gem_obj *exynos_gem_obj; + struct exynos_drm_gem_obj *exynos_gem_obj = NULL; - DRM_DEBUG_KMS("%s : size = 0x%x\n", __FILE__, args->size); + DRM_DEBUG_KMS("%s\n", __FILE__); - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size, - &args->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, + &args->handle, args->size); if (IS_ERR(exynos_gem_obj)) return PTR_ERR(exynos_gem_obj); @@ -302,8 +321,8 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv, args->pitch = args->width * args->bpp >> 3; args->size = args->pitch * args->height; - exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size, - &args->handle); + exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, &args->handle, + args->size); if (IS_ERR(exynos_gem_obj)) return PTR_ERR(exynos_gem_obj); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index e5fc014..213838d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -49,9 +49,9 @@ struct exynos_drm_gem_obj { }; /* create a new buffer and get a new gem handle. */ -struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv, - struct drm_device *dev, unsigned int size, - unsigned int *handle); +struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, + struct drm_file *file_priv, + unsigned int *handle, unsigned long size); /* * request gem object creation and buffer allocation as the size diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 1d161cb..1205043 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -32,17 +32,16 @@ /** * User-desired buffer creation information structure. * - * @size: requested size for the object. + * @size: user-desired memory allocation size. * - this size value would be page-aligned internally. * @flags: user request for setting memory type or cache attributes. - * @handle: returned handle for the object. - * @pad: just padding to be 64-bit aligned. + * @handle: returned a handle to created gem object. + * - this handle will be set by gem module of kernel side. */ struct drm_exynos_gem_create { - unsigned int size; + uint64_t size; unsigned int flags; unsigned int handle; - unsigned int pad; }; /** -- cgit v0.10.2 From c7493668eeced636afabfed57dfead8329c3d7fa Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 9 Nov 2011 16:50:30 +0900 Subject: drm/exynos: removed unnecessary variable. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 6f8afea..303189c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -29,8 +29,6 @@ #include "exynos_drm_drv.h" #include "exynos_drm_buf.h" -static DEFINE_MUTEX(exynos_drm_buf_lock); - static int lowlevel_buffer_allocate(struct drm_device *dev, struct exynos_drm_buf_entry *entry) { -- cgit v0.10.2 From 2c871127e994a678b82104a4110eb7fcc87f05ad Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 15:23:32 +0900 Subject: drm/exynos: changed buffer structure. the purpose of this patch is to consider IOMMU support in the future. EXYNOS4 SoC supports IOMMU also so the address for DMA could be physical address with IOMMU or device address with IOMMU. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 303189c..2bb07bc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -27,80 +27,84 @@ #include "drm.h" #include "exynos_drm_drv.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" static int lowlevel_buffer_allocate(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s\n", __FILE__); - entry->vaddr = dma_alloc_writecombine(dev->dev, entry->size, - (dma_addr_t *)&entry->paddr, GFP_KERNEL); - if (!entry->paddr) { + buffer->kvaddr = dma_alloc_writecombine(dev->dev, buffer->size, + &buffer->dma_addr, GFP_KERNEL); + if (!buffer->kvaddr) { DRM_ERROR("failed to allocate buffer.\n"); return -ENOMEM; } - DRM_DEBUG_KMS("allocated : vaddr(0x%x), paddr(0x%x), size(0x%x)\n", - (unsigned int)entry->vaddr, entry->paddr, entry->size); + DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", + (unsigned long)buffer->kvaddr, + (unsigned long)buffer->dma_addr, + buffer->size); return 0; } static void lowlevel_buffer_deallocate(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s.\n", __FILE__); - if (entry->paddr && entry->vaddr && entry->size) - dma_free_writecombine(dev->dev, entry->size, entry->vaddr, - entry->paddr); + if (buffer->dma_addr && buffer->size) + dma_free_writecombine(dev->dev, buffer->size, buffer->kvaddr, + (dma_addr_t)buffer->dma_addr); else - DRM_DEBUG_KMS("entry data is null.\n"); + DRM_DEBUG_KMS("buffer data are invalid.\n"); } -struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev, +struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev, unsigned int size) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; DRM_DEBUG_KMS("%s.\n", __FILE__); + DRM_DEBUG_KMS("desired size = 0x%x\n", size); - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) { - DRM_ERROR("failed to allocate exynos_drm_buf_entry.\n"); + buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); + if (!buffer) { + DRM_ERROR("failed to allocate exynos_drm_gem_buf.\n"); return ERR_PTR(-ENOMEM); } - entry->size = size; + buffer->size = size; /* * allocate memory region with size and set the memory information - * to vaddr and paddr of a entry object. + * to vaddr and dma_addr of a buffer object. */ - if (lowlevel_buffer_allocate(dev, entry) < 0) { - kfree(entry); - entry = NULL; + if (lowlevel_buffer_allocate(dev, buffer) < 0) { + kfree(buffer); + buffer = NULL; return ERR_PTR(-ENOMEM); } - return entry; + return buffer; } void exynos_drm_buf_destroy(struct drm_device *dev, - struct exynos_drm_buf_entry *entry) + struct exynos_drm_gem_buf *buffer) { DRM_DEBUG_KMS("%s.\n", __FILE__); - if (!entry) { - DRM_DEBUG_KMS("entry is null.\n"); + if (!buffer) { + DRM_DEBUG_KMS("buffer is null.\n"); return; } - lowlevel_buffer_deallocate(dev, entry); + lowlevel_buffer_deallocate(dev, buffer); - kfree(entry); - entry = NULL; + kfree(buffer); + buffer = NULL; } MODULE_AUTHOR("Inki Dae "); diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.h b/drivers/gpu/drm/exynos/exynos_drm_buf.h index 045d59e..6e91f9c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.h +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.h @@ -26,28 +26,15 @@ #ifndef _EXYNOS_DRM_BUF_H_ #define _EXYNOS_DRM_BUF_H_ -/* - * exynos drm buffer entry structure. - * - * @paddr: physical address of allocated memory. - * @vaddr: kernel virtual address of allocated memory. - * @size: size of allocated memory. - */ -struct exynos_drm_buf_entry { - dma_addr_t paddr; - void __iomem *vaddr; - unsigned int size; -}; - /* allocate physical memory. */ -struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev, +struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev, unsigned int size); -/* get physical memory information of a drm framebuffer. */ -struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb); +/* get memory information of a drm framebuffer. */ +struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb); /* remove allocated physical memory. */ void exynos_drm_buf_destroy(struct drm_device *dev, - struct exynos_drm_buf_entry *entry); + struct exynos_drm_gem_buf *buffer); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index b1d6526..ee43cc2 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -29,36 +29,17 @@ #include "drmP.h" #include "drm_crtc_helper.h" +#include "exynos_drm_crtc.h" #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" #include "exynos_drm_encoder.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" #define to_exynos_crtc(x) container_of(x, struct exynos_drm_crtc,\ drm_crtc) /* - * Exynos specific crtc postion structure. - * - * @fb_x: offset x on a framebuffer to be displyed - * - the unit is screen coordinates. - * @fb_y: offset y on a framebuffer to be displayed - * - the unit is screen coordinates. - * @crtc_x: offset x on hardware screen. - * @crtc_y: offset y on hardware screen. - * @crtc_w: width of hardware screen. - * @crtc_h: height of hardware screen. - */ -struct exynos_drm_crtc_pos { - unsigned int fb_x; - unsigned int fb_y; - unsigned int crtc_x; - unsigned int crtc_y; - unsigned int crtc_w; - unsigned int crtc_h; -}; - -/* * Exynos specific crtc structure. * * @drm_crtc: crtc object. @@ -89,27 +70,27 @@ static void exynos_drm_crtc_apply(struct drm_crtc *crtc) exynos_drm_encoder_crtc_commit); } -static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, - struct drm_framebuffer *fb, - struct drm_display_mode *mode, - struct exynos_drm_crtc_pos *pos) +int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, + struct drm_framebuffer *fb, + struct drm_display_mode *mode, + struct exynos_drm_crtc_pos *pos) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned int actual_w; unsigned int actual_h; - entry = exynos_drm_fb_get_buf(fb); - if (!entry) { - DRM_LOG_KMS("entry is null.\n"); + buffer = exynos_drm_fb_get_buf(fb); + if (!buffer) { + DRM_LOG_KMS("buffer is null.\n"); return -EFAULT; } - overlay->paddr = entry->paddr; - overlay->vaddr = entry->vaddr; + overlay->dma_addr = buffer->dma_addr; + overlay->vaddr = buffer->kvaddr; - DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n", + DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n", (unsigned long)overlay->vaddr, - (unsigned long)overlay->paddr); + (unsigned long)overlay->dma_addr); actual_w = min((mode->hdisplay - pos->crtc_x), pos->crtc_w); actual_h = min((mode->vdisplay - pos->crtc_y), pos->crtc_h); diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h index c584042..25f72a6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.h +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h @@ -35,4 +35,29 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr); int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int crtc); void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int crtc); +/* + * Exynos specific crtc postion structure. + * + * @fb_x: offset x on a framebuffer to be displyed + * - the unit is screen coordinates. + * @fb_y: offset y on a framebuffer to be displayed + * - the unit is screen coordinates. + * @crtc_x: offset x on hardware screen. + * @crtc_y: offset y on hardware screen. + * @crtc_w: width of hardware screen. + * @crtc_h: height of hardware screen. + */ +struct exynos_drm_crtc_pos { + unsigned int fb_x; + unsigned int fb_y; + unsigned int crtc_x; + unsigned int crtc_y; + unsigned int crtc_w; + unsigned int crtc_h; +}; + +int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay, + struct drm_framebuffer *fb, + struct drm_display_mode *mode, + struct exynos_drm_crtc_pos *pos); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 1575e5f..38a6f1d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -79,8 +79,8 @@ struct exynos_drm_overlay_ops { * @scan_flag: interlace or progressive way. * (it could be DRM_MODE_FLAG_*) * @bpp: pixel size.(in bit) - * @paddr: bus(accessed by dma) physical memory address to this overlay - * and this is physically continuous. + * @dma_addr: bus(accessed by dma) address to the memory region allocated + * for a overlay. * @vaddr: virtual memory addresss to this overlay. * @default_win: a window to be enabled. * @color_key: color key on or off. @@ -108,7 +108,7 @@ struct exynos_drm_overlay { unsigned int scan_flag; unsigned int bpp; unsigned int pitch; - dma_addr_t paddr; + dma_addr_t dma_addr; void __iomem *vaddr; bool default_win; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 8d0f662..5bf4a1a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -43,14 +43,14 @@ * * @fb: drm framebuffer obejct. * @exynos_gem_obj: exynos specific gem object containing a gem object. - * @entry: pointer to exynos drm buffer entry object. - * - containing only the information to physically continuous memory - * region allocated at default framebuffer creation. + * @buffer: pointer to exynos_drm_gem_buffer object. + * - contain the memory information to memory region allocated + * at default framebuffer creation. */ struct exynos_drm_fb { struct drm_framebuffer fb; struct exynos_drm_gem_obj *exynos_gem_obj; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; }; static void exynos_drm_fb_destroy(struct drm_framebuffer *fb) @@ -65,8 +65,8 @@ static void exynos_drm_fb_destroy(struct drm_framebuffer *fb) * default framebuffer has no gem object so * a buffer of the default framebuffer should be released at here. */ - if (!exynos_fb->exynos_gem_obj && exynos_fb->entry) - exynos_drm_buf_destroy(fb->dev, exynos_fb->entry); + if (!exynos_fb->exynos_gem_obj && exynos_fb->buffer) + exynos_drm_buf_destroy(fb->dev, exynos_fb->buffer); kfree(exynos_fb); exynos_fb = NULL; @@ -145,23 +145,23 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, */ if (!mode_cmd->handle) { if (!file_priv) { - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; /* * in case that file_priv is NULL, it allocates * only buffer and this buffer would be used * for default framebuffer. */ - entry = exynos_drm_buf_create(dev, size); - if (IS_ERR(entry)) { - ret = PTR_ERR(entry); + buffer = exynos_drm_buf_create(dev, size); + if (IS_ERR(buffer)) { + ret = PTR_ERR(buffer); goto err_buffer; } - exynos_fb->entry = entry; + exynos_fb->buffer = buffer; - DRM_LOG_KMS("default fb: paddr = 0x%lx, size = 0x%x\n", - (unsigned long)entry->paddr, size); + DRM_LOG_KMS("default: dma_addr = 0x%lx, size = 0x%x\n", + (unsigned long)buffer->dma_addr, size); goto out; } else { @@ -191,10 +191,10 @@ exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev, * so that default framebuffer has no its own gem object, * only its own buffer object. */ - exynos_fb->entry = exynos_gem_obj->entry; + exynos_fb->buffer = exynos_gem_obj->buffer; - DRM_LOG_KMS("paddr = 0x%lx, size = 0x%x, gem object = 0x%x\n", - (unsigned long)exynos_fb->entry->paddr, size, + DRM_LOG_KMS("dma_addr = 0x%lx, size = 0x%x, gem object = 0x%x\n", + (unsigned long)exynos_fb->buffer->dma_addr, size, (unsigned int)&exynos_gem_obj->base); out: @@ -222,22 +222,22 @@ struct drm_framebuffer *exynos_drm_fb_create(struct drm_device *dev, return exynos_drm_fb_init(file_priv, dev, mode_cmd); } -struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) +struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb) { struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; DRM_DEBUG_KMS("%s\n", __FILE__); - entry = exynos_fb->entry; - if (!entry) + buffer = exynos_fb->buffer; + if (!buffer) return NULL; - DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n", - (unsigned long)entry->vaddr, - (unsigned long)entry->paddr); + DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n", + (unsigned long)buffer->kvaddr, + (unsigned long)buffer->dma_addr); - return entry; + return buffer; } static void exynos_drm_output_poll_changed(struct drm_device *dev) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 0effd77..836f410 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -33,6 +33,7 @@ #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" +#include "exynos_drm_gem.h" #include "exynos_drm_buf.h" #define MAX_CONNECTOR 4 @@ -90,7 +91,7 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, struct fb_info *fbi = helper->fbdev; struct drm_device *dev = helper->dev; struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned int size = fb->width * fb->height * (fb->bits_per_pixel >> 3); unsigned long offset; @@ -101,18 +102,18 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height); - entry = exynos_drm_fb_get_buf(fb); - if (!entry) { - DRM_LOG_KMS("entry is null.\n"); + buffer = exynos_drm_fb_get_buf(fb); + if (!buffer) { + DRM_LOG_KMS("buffer is null.\n"); return -EFAULT; } offset = fbi->var.xoffset * (fb->bits_per_pixel >> 3); offset += fbi->var.yoffset * fb->pitch; - dev->mode_config.fb_base = entry->paddr; - fbi->screen_base = entry->vaddr + offset; - fbi->fix.smem_start = entry->paddr + offset; + dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr; + fbi->screen_base = buffer->kvaddr + offset; + fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset); fbi->screen_size = size; fbi->fix.smem_len = size; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f2d883f..f5c8b07 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -64,7 +64,7 @@ struct fimd_win_data { unsigned int fb_width; unsigned int fb_height; unsigned int bpp; - dma_addr_t paddr; + dma_addr_t dma_addr; void __iomem *vaddr; unsigned int buf_offsize; unsigned int line_size; /* bytes */ @@ -251,7 +251,7 @@ static void fimd_win_mode_set(struct device *dev, win_data->ovl_height = overlay->crtc_height; win_data->fb_width = overlay->fb_width; win_data->fb_height = overlay->fb_height; - win_data->paddr = overlay->paddr + offset; + win_data->dma_addr = overlay->dma_addr + offset; win_data->vaddr = overlay->vaddr + offset; win_data->bpp = overlay->bpp; win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) * @@ -263,7 +263,7 @@ static void fimd_win_mode_set(struct device *dev, DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", win_data->ovl_width, win_data->ovl_height); DRM_DEBUG_KMS("paddr = 0x%lx, vaddr = 0x%lx\n", - (unsigned long)win_data->paddr, + (unsigned long)win_data->dma_addr, (unsigned long)win_data->vaddr); DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n", overlay->fb_width, overlay->crtc_width); @@ -376,16 +376,16 @@ static void fimd_win_commit(struct device *dev) writel(val, ctx->regs + SHADOWCON); /* buffer start address */ - val = win_data->paddr; + val = (unsigned long)win_data->dma_addr; writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); /* buffer end address */ size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3); - val = win_data->paddr + size; + val = (unsigned long)(win_data->dma_addr + size); writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", - (unsigned long)win_data->paddr, val, size); + (unsigned long)win_data->dma_addr, val, size); DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", win_data->ovl_width, win_data->ovl_height); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index bd6ede8..b1b94b1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -127,15 +127,15 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, { struct exynos_drm_gem_obj *exynos_gem_obj = NULL; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; int ret; size = roundup(size, PAGE_SIZE); DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); - entry = exynos_drm_buf_create(dev, size); - if (!entry) + buffer = exynos_drm_buf_create(dev, size); + if (!buffer) return ERR_PTR(-ENOMEM); exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); @@ -144,12 +144,12 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, goto err_gem_init; } - exynos_gem_obj->entry = entry; + exynos_gem_obj->buffer = buffer; return exynos_gem_obj; err_gem_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->entry); + exynos_drm_buf_destroy(dev, exynos_gem_obj->buffer); return ERR_PTR(ret); } @@ -194,7 +194,7 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, { struct drm_gem_object *obj = filp->private_data; struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj); - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; unsigned long pfn, vm_size; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -206,20 +206,20 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, vm_size = vma->vm_end - vma->vm_start; /* - * a entry contains information to physically continuous memory + * a buffer contains information to physically continuous memory * allocated by user request or at framebuffer creation. */ - entry = exynos_gem_obj->entry; + buffer = exynos_gem_obj->buffer; /* check if user-requested size is valid. */ - if (vm_size > entry->size) + if (vm_size > buffer->size) return -EINVAL; /* * get page frame number to physical memory to be mapped * to user space. */ - pfn = exynos_gem_obj->entry->paddr >> PAGE_SHIFT; + pfn = ((unsigned long)exynos_gem_obj->buffer->dma_addr) >> PAGE_SHIFT; DRM_DEBUG_KMS("pfn = 0x%lx\n", pfn); @@ -300,7 +300,7 @@ void exynos_drm_gem_free_object(struct drm_gem_object *gem_obj) exynos_gem_obj = to_exynos_gem_obj(gem_obj); - exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->entry); + exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->buffer); kfree(exynos_gem_obj); } @@ -379,7 +379,8 @@ int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_lock(&dev->struct_mutex); - pfn = (exynos_gem_obj->entry->paddr >> PAGE_SHIFT) + page_offset; + pfn = (((unsigned long)exynos_gem_obj->buffer->dma_addr) >> + PAGE_SHIFT) + page_offset; ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index 213838d..ef87973 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -30,13 +30,29 @@ struct exynos_drm_gem_obj, base) /* + * exynos drm gem buffer structure. + * + * @kvaddr: kernel virtual address to allocated memory region. + * @dma_addr: bus address(accessed by dma) to allocated memory region. + * - this address could be physical address without IOMMU and + * device address with IOMMU. + * @size: size of allocated memory region. + */ +struct exynos_drm_gem_buf { + void __iomem *kvaddr; + dma_addr_t dma_addr; + unsigned long size; +}; + +/* * exynos drm buffer structure. * * @base: a gem object. * - a new handle to this gem object would be created * by drm_gem_handle_create(). - * @entry: pointer to exynos drm buffer entry object. - * - containing the information to physically + * @buffer: a pointer to exynos_drm_gem_buffer object. + * - contain the information to memory region allocated + * by user request or at framebuffer creation. * continuous memory region allocated by user request * or at framebuffer creation. * @@ -45,7 +61,7 @@ */ struct exynos_drm_gem_obj { struct drm_gem_object base; - struct exynos_drm_buf_entry *entry; + struct exynos_drm_gem_buf *buffer; }; /* create a new buffer and get a new gem handle. */ -- cgit v0.10.2 From 483b88f86e1682241bfa0848e348aa175257c6e7 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 11 Nov 2011 21:28:00 +0900 Subject: drm/exynos: fix vblank bug. In case that vblank_disable_allowed is 1, the problem that manager->pipe could be -1 at vsync interrupt handler could be induced so this patch fixes that. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f5c8b07..272c3b5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -447,7 +447,9 @@ static void fimd_win_commit(struct device *dev) static void fimd_win_disable(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct fimd_win_data *win_data; + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct drm_device *drm_dev = subdrv->drm_dev; + struct exynos_drm_manager *manager = &subdrv->manager; int win = ctx->default_win; u32 val; @@ -456,8 +458,6 @@ static void fimd_win_disable(struct device *dev) if (win < 0 || win > WINDOWS_NR) return; - win_data = &ctx->win_data[win]; - /* protect windows */ val = readl(ctx->regs + SHADOWCON); val |= SHADOWCON_WINx_PROTECT(win); @@ -473,6 +473,29 @@ static void fimd_win_disable(struct device *dev) val &= ~SHADOWCON_CHx_ENABLE(win); val &= ~SHADOWCON_WINx_PROTECT(win); writel(val, ctx->regs + SHADOWCON); + + /* fimd dma off. */ + val = readl(ctx->regs + VIDCON0); + val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); + writel(val, ctx->regs + VIDCON0); + + /* + * if vblank is enabled status with dma off then + * it disables vsync interrupt. + */ + if (drm_dev->vblank_enabled[manager->pipe] && + atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { + drm_vblank_put(drm_dev, manager->pipe); + + /* + * if vblank_disable_allowed is 0 then disable vsync interrupt + * right now else the vsync interrupt would be disabled by drm + * timer once a current process gives up ownershop of + * vblank event. + */ + if (!drm_dev->vblank_disable_allowed) + drm_vblank_off(drm_dev, manager->pipe); + } } static struct exynos_drm_overlay_ops fimd_overlay_ops = { @@ -528,6 +551,16 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id) /* VSYNC interrupt */ writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1); + /* + * in case that vblank_disable_allowed is 1, it could induce + * the problem that manager->pipe could be -1 because with + * disable callback, vsync interrupt isn't disabled and at this moment, + * vsync interrupt could occur. the vsync interrupt would be disabled + * by timer handler later. + */ + if (manager->pipe == -1) + return IRQ_HANDLED; + drm_handle_vblank(drm_dev, manager->pipe); fimd_finish_pageflip(drm_dev, manager->pipe); @@ -548,13 +581,6 @@ static int fimd_subdrv_probe(struct drm_device *drm_dev, struct device *dev) */ drm_dev->irq_enabled = 1; - /* - * with vblank_disable_allowed = 1, vblank interrupt will be disabled - * by drm timer once a current process gives up ownership of - * vblank event.(drm_vblank_put function was called) - */ - drm_dev->vblank_disable_allowed = 1; - return 0; } -- cgit v0.10.2 From 4f9eb94f7be3d357e811ec74a53027bd27f1748f Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 12 Nov 2011 16:57:42 +0900 Subject: drm/exynos: include linux/module.h Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 38a6f1d..2d74f85 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -29,6 +29,7 @@ #ifndef _EXYNOS_DRM_DRV_H_ #define _EXYNOS_DRM_DRV_H_ +#include #include "drm.h" #define MAX_CRTC 2 -- cgit v0.10.2 From e13b91c1c47e7be178d2d7914452040ee82c0bd2 Mon Sep 17 00:00:00 2001 From: Guan Xuetao Date: Mon, 13 Jun 2011 11:44:49 +0800 Subject: unicore32: fix build error for find bitops Remove the __uc32_ prefix in find bitops functions. Move find_* macros behind asm-generic/bitops.h inclusion. see commit <19de85ef574c3a2182e3ccad9581805052f14946> bitops: add #ifndef for each of find bitops also see commit <63e424c84429903c92a0f1e9654c31ccaf6694d0> arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT} Signed-off-by: Guan Xuetao Cc: Akinobu Mita Acked-by: Akinobu Mita Cc: Arnd Bergmann diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h index 1628a63..401f597 100644 --- a/arch/unicore32/include/asm/bitops.h +++ b/arch/unicore32/include/asm/bitops.h @@ -13,12 +13,6 @@ #ifndef __UNICORE_BITOPS_H__ #define __UNICORE_BITOPS_H__ -#define find_next_bit __uc32_find_next_bit -#define find_next_zero_bit __uc32_find_next_zero_bit - -#define find_first_bit __uc32_find_first_bit -#define find_first_zero_bit __uc32_find_first_zero_bit - #define _ASM_GENERIC_BITOPS_FLS_H_ #define _ASM_GENERIC_BITOPS___FLS_H_ #define _ASM_GENERIC_BITOPS_FFS_H_ @@ -44,4 +38,10 @@ static inline int fls(int x) #include +/* following definitions: to avoid using codes in lib/find_*.c */ +#define find_next_bit find_next_bit +#define find_next_zero_bit find_next_zero_bit +#define find_first_bit find_first_bit +#define find_first_zero_bit find_first_zero_bit + #endif /* __UNICORE_BITOPS_H__ */ diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c index a897080..d98bd81 100644 --- a/arch/unicore32/kernel/ksyms.c +++ b/arch/unicore32/kernel/ksyms.c @@ -24,8 +24,8 @@ #include "ksyms.h" -EXPORT_SYMBOL(__uc32_find_next_zero_bit); -EXPORT_SYMBOL(__uc32_find_next_bit); +EXPORT_SYMBOL(find_next_zero_bit); +EXPORT_SYMBOL(find_next_bit); EXPORT_SYMBOL(__backtrace); diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S index c360ce9..c777462 100644 --- a/arch/unicore32/lib/findbit.S +++ b/arch/unicore32/lib/findbit.S @@ -17,7 +17,7 @@ * Purpose : Find a 'zero' bit * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit); */ -__uc32_find_first_zero_bit: +ENTRY(find_first_zero_bit) cxor.a r1, #0 beq 3f mov r2, #0 @@ -29,13 +29,14 @@ __uc32_find_first_zero_bit: bub 1b 3: mov r0, r1 @ no free bits mov pc, lr +ENDPROC(find_first_zero_bit) /* * Purpose : Find next 'zero' bit * Prototype: int find_next_zero_bit * (void *addr, unsigned int maxbit, int offset) */ -ENTRY(__uc32_find_next_zero_bit) +ENTRY(find_next_zero_bit) cxor.a r1, #0 beq 3b and.a ip, r2, #7 @@ -47,14 +48,14 @@ ENTRY(__uc32_find_next_zero_bit) or r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit -ENDPROC(__uc32_find_next_zero_bit) +ENDPROC(find_next_zero_bit) /* * Purpose : Find a 'one' bit * Prototype: int find_first_bit * (const unsigned long *addr, unsigned int maxbit); */ -__uc32_find_first_bit: +ENTRY(find_first_bit) cxor.a r1, #0 beq 3f mov r2, #0 @@ -66,13 +67,14 @@ __uc32_find_first_bit: bub 1b 3: mov r0, r1 @ no free bits mov pc, lr +ENDPROC(find_first_bit) /* * Purpose : Find next 'one' bit * Prototype: int find_next_zero_bit * (void *addr, unsigned int maxbit, int offset) */ -ENTRY(__uc32_find_next_bit) +ENTRY(find_next_bit) cxor.a r1, #0 beq 3b and.a ip, r2, #7 @@ -83,7 +85,7 @@ ENTRY(__uc32_find_next_bit) or r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit -ENDPROC(__uc32_find_next_bit) +ENDPROC(find_next_bit) /* * One or more bits in the LSB of r3 are assumed to be set. -- cgit v0.10.2 From 63c95fa414032adb56194d026c9ed054488b0783 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 15 Aug 2011 01:07:06 -0400 Subject: arch/unicore32: do not use EXTRA_AFLAGS or EXTRA_CFLAGS Usage of these flags has been deprecated for nearly 4 years by: commit f77bf01425b11947eeb3b5b54685212c302741b8 Author: Sam Ravnborg Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg Cc: Guan Xuetao Signed-off-by: Arnaud Lacombe Acked-by: Guan Xuetao diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile index b0954a2..950a9af 100644 --- a/arch/unicore32/boot/compressed/Makefile +++ b/arch/unicore32/boot/compressed/Makefile @@ -10,8 +10,8 @@ # Copyright (C) 2001~2010 GUAN Xue-tao # -EXTRA_CFLAGS := -fpic -fno-builtin -EXTRA_AFLAGS := -Wa,-march=all +ccflags-y := -fpic -fno-builtin +asflags-y := -Wa,-march=all OBJS := misc.o -- cgit v0.10.2 From 66ae45604c90f25397294099cdb214f642471327 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 5 Oct 2011 22:29:47 +0800 Subject: rtc: rtc-puv3: Add __devinit and __devexit markers for probe and remove Signed-off-by: Axel Lin Acked-by: Guan Xuetao diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c index b3eba3c..e4b6880 100644 --- a/drivers/rtc/rtc-puv3.c +++ b/drivers/rtc/rtc-puv3.c @@ -220,7 +220,7 @@ static void puv3_rtc_enable(struct platform_device *pdev, int en) } } -static int puv3_rtc_remove(struct platform_device *dev) +static int __devexit puv3_rtc_remove(struct platform_device *dev) { struct rtc_device *rtc = platform_get_drvdata(dev); @@ -236,7 +236,7 @@ static int puv3_rtc_remove(struct platform_device *dev) return 0; } -static int puv3_rtc_probe(struct platform_device *pdev) +static int __devinit puv3_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; struct resource *res; -- cgit v0.10.2 From d159e571cb81a75d50f84fc4b716edee636f6858 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 14 Oct 2011 14:28:11 +0200 Subject: unicore32: drop unused Kconfig symbols Signed-off-by: Paul Bolle Acked-by: Guan Xuetao diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug index ae2ec33..1a36262 100644 --- a/arch/unicore32/Kconfig.debug +++ b/arch/unicore32/Kconfig.debug @@ -44,18 +44,4 @@ config DEBUG_OCD Say Y here if you want the debug print routines to direct their output to the UniCore On-Chip-Debugger channel using CP #1. -config DEBUG_OCD_BREAKPOINT - bool "Breakpoint support via On-Chip-Debugger" - depends on DEBUG_OCD - -config DEBUG_UART - int "Kernel low-level debugging messages via serial port" - depends on DEBUG_LL - range 0 1 - default "0" - help - Choice for UART for kernel low-level using PKUnity UARTS, - should be between zero and one. The port must have been - initialised by the boot-loader before use. - endmenu -- cgit v0.10.2 From 943ef2ec4f5f14940ea391d25bf93eb99eb2ff2a Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Nov 2011 11:45:16 +0100 Subject: watchdog: adx_wdt.c: remove driver Remove the driver (that was added in v2.6.32) since the architecture has never been merged into mainline. Reported-by: Paul Bolle Acked-by: Thierry Reding Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6285867..79fd606 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -314,13 +314,6 @@ config NUC900_WATCHDOG To compile this driver as a module, choose M here: the module will be called nuc900_wdt. -config ADX_WATCHDOG - tristate "Avionic Design Xanthos watchdog" - depends on ARCH_PXA_ADX - help - Say Y here if you want support for the watchdog timer on Avionic - Design Xanthos boards. - config TS72XX_WATCHDOG tristate "TS-72XX SBC Watchdog" depends on MACH_TS72XX diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 55bd574..fe893e9 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -51,7 +51,6 @@ obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o -obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c deleted file mode 100644 index af6e6b1..0000000 --- a/drivers/watchdog/adx_wdt.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Copyright (C) 2008-2009 Avionic Design GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define WATCHDOG_NAME "adx-wdt" - -/* register offsets */ -#define ADX_WDT_CONTROL 0x00 -#define ADX_WDT_CONTROL_ENABLE (1 << 0) -#define ADX_WDT_CONTROL_nRESET (1 << 1) -#define ADX_WDT_TIMEOUT 0x08 - -static struct platform_device *adx_wdt_dev; -static unsigned long driver_open; - -#define WDT_STATE_STOP 0 -#define WDT_STATE_START 1 - -struct adx_wdt { - void __iomem *base; - unsigned long timeout; - unsigned int state; - unsigned int wake; - spinlock_t lock; -}; - -static const struct watchdog_info adx_wdt_info = { - .identity = "Avionic Design Xanthos Watchdog", - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -}; - -static void adx_wdt_start_locked(struct adx_wdt *wdt) -{ - u32 ctrl; - - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl |= ADX_WDT_CONTROL_ENABLE; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - wdt->state = WDT_STATE_START; -} - -static void adx_wdt_start(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - adx_wdt_start_locked(wdt); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_stop_locked(struct adx_wdt *wdt) -{ - u32 ctrl; - - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl &= ~ADX_WDT_CONTROL_ENABLE; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - wdt->state = WDT_STATE_STOP; -} - -static void adx_wdt_stop(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - adx_wdt_stop_locked(wdt); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds) -{ - unsigned long timeout = seconds * 1000; - unsigned long flags; - unsigned int state; - - spin_lock_irqsave(&wdt->lock, flags); - state = wdt->state; - adx_wdt_stop_locked(wdt); - writel(timeout, wdt->base + ADX_WDT_TIMEOUT); - - if (state == WDT_STATE_START) - adx_wdt_start_locked(wdt); - - wdt->timeout = timeout; - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds) -{ - *seconds = wdt->timeout / 1000; -} - -static void adx_wdt_keepalive(struct adx_wdt *wdt) -{ - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static int adx_wdt_open(struct inode *inode, struct file *file) -{ - struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev); - - if (test_and_set_bit(0, &driver_open)) - return -EBUSY; - - file->private_data = wdt; - adx_wdt_set_timeout(wdt, 30); - adx_wdt_start(wdt); - - return nonseekable_open(inode, file); -} - -static int adx_wdt_release(struct inode *inode, struct file *file) -{ - struct adx_wdt *wdt = file->private_data; - - adx_wdt_stop(wdt); - clear_bit(0, &driver_open); - - return 0; -} - -static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct adx_wdt *wdt = file->private_data; - void __user *argp = (void __user *)arg; - unsigned long __user *p = argp; - unsigned long seconds = 0; - unsigned int options; - long ret = -EINVAL; - - switch (cmd) { - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info))) - return -EFAULT; - else - return 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - adx_wdt_keepalive(wdt); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(seconds, p)) - return -EFAULT; - - adx_wdt_set_timeout(wdt, seconds); - - /* fallthrough */ - case WDIOC_GETTIMEOUT: - adx_wdt_get_timeout(wdt, &seconds); - return put_user(seconds, p); - - case WDIOC_SETOPTIONS: - if (copy_from_user(&options, argp, sizeof(options))) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - adx_wdt_stop(wdt); - ret = 0; - } - - if (options & WDIOS_ENABLECARD) { - adx_wdt_start(wdt); - ret = 0; - } - - return ret; - - default: - break; - } - - return -ENOTTY; -} - -static ssize_t adx_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - struct adx_wdt *wdt = file->private_data; - - if (len) - adx_wdt_keepalive(wdt); - - return len; -} - -static const struct file_operations adx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .open = adx_wdt_open, - .release = adx_wdt_release, - .unlocked_ioctl = adx_wdt_ioctl, - .write = adx_wdt_write, -}; - -static struct miscdevice adx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &adx_wdt_fops, -}; - -static int __devinit adx_wdt_probe(struct platform_device *pdev) -{ - struct resource *res; - struct adx_wdt *wdt; - int ret = 0; - u32 ctrl; - - wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); - if (!wdt) { - dev_err(&pdev->dev, "cannot allocate WDT structure\n"); - return -ENOMEM; - } - - spin_lock_init(&wdt->lock); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "cannot obtain I/O memory region\n"); - return -ENXIO; - } - - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), res->name); - if (!res) { - dev_err(&pdev->dev, "cannot request I/O memory region\n"); - return -ENXIO; - } - - wdt->base = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!wdt->base) { - dev_err(&pdev->dev, "cannot remap I/O memory region\n"); - return -ENXIO; - } - - /* disable watchdog and reboot on timeout */ - ctrl = readl(wdt->base + ADX_WDT_CONTROL); - ctrl &= ~ADX_WDT_CONTROL_ENABLE; - ctrl &= ~ADX_WDT_CONTROL_nRESET; - writel(ctrl, wdt->base + ADX_WDT_CONTROL); - - platform_set_drvdata(pdev, wdt); - adx_wdt_dev = pdev; - - ret = misc_register(&adx_wdt_miscdev); - if (ret) { - dev_err(&pdev->dev, "cannot register miscdev on minor %d " - "(err=%d)\n", WATCHDOG_MINOR, ret); - return ret; - } - - return 0; -} - -static int __devexit adx_wdt_remove(struct platform_device *pdev) -{ - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - misc_deregister(&adx_wdt_miscdev); - adx_wdt_stop(wdt); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static void adx_wdt_shutdown(struct platform_device *pdev) -{ - struct adx_wdt *wdt = platform_get_drvdata(pdev); - adx_wdt_stop(wdt); -} - -#ifdef CONFIG_PM -static int adx_wdt_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0; - adx_wdt_stop(wdt); - - return 0; -} - -static int adx_wdt_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct adx_wdt *wdt = platform_get_drvdata(pdev); - - if (wdt->wake) - adx_wdt_start(wdt); - - return 0; -} - -static const struct dev_pm_ops adx_wdt_pm_ops = { - .suspend = adx_wdt_suspend, - .resume = adx_wdt_resume, -}; - -# define ADX_WDT_PM_OPS (&adx_wdt_pm_ops) -#else -# define ADX_WDT_PM_OPS NULL -#endif - -static struct platform_driver adx_wdt_driver = { - .probe = adx_wdt_probe, - .remove = __devexit_p(adx_wdt_remove), - .shutdown = adx_wdt_shutdown, - .driver = { - .name = WATCHDOG_NAME, - .owner = THIS_MODULE, - .pm = ADX_WDT_PM_OPS, - }, -}; - -static int __init adx_wdt_init(void) -{ - return platform_driver_register(&adx_wdt_driver); -} - -static void __exit adx_wdt_exit(void) -{ - platform_driver_unregister(&adx_wdt_driver); -} - -module_init(adx_wdt_init); -module_exit(adx_wdt_exit); - -MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Thierry Reding "); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v0.10.2 From 0f768a7235d3dfb6f4833030a95a06419df089cb Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 14 Nov 2011 16:35:26 -0600 Subject: ASoC: fsl_ssi: properly initialize the sysfs attribute object Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by: Timur Tabi Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 0268cf9..83c4bd5 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -694,6 +694,7 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) /* Initialize the the device_attribute structure */ dev_attr = &ssi_private->dev_attr; + sysfs_attr_init(&dev_attr->attr); dev_attr->attr.name = "statistics"; dev_attr->attr.mode = S_IRUGO; dev_attr->show = fsl_sysfs_ssi_show; -- cgit v0.10.2 From f1ebcc74d5b2159f44c96b479b6eb8afc7829095 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 14 Nov 2011 20:48:06 -0500 Subject: Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush The btrfs snapshotting code requires that once a root has been snapshotted, we don't change it during a commit. But there are two cases to lead to tree corruptions: 1) multi-thread snapshots can commit serveral snapshots in a transaction, and this may change the src root when processing the following pending snapshots, which lead to the former snapshots corruptions; 2) the free inode cache was changing the roots when it root the cache, which lead to corruptions. This fixes things by making sure we force COW the block after we create a snapshot during commiting a transaction, then any changes to the roots will result in COW, and we get all the fs roots and snapshot roots to be consistent. Signed-off-by: Liu Bo Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 0fe615e..dede441 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -514,10 +514,25 @@ static inline int should_cow_block(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *buf) { + /* ensure we can see the force_cow */ + smp_rmb(); + + /* + * We do not need to cow a block if + * 1) this block is not created or changed in this transaction; + * 2) this block does not belong to TREE_RELOC tree; + * 3) the root is not forced COW. + * + * What is forced COW: + * when we create snapshot during commiting the transaction, + * after we've finished coping src root, we must COW the shared + * block to ensure the metadata consistency. + */ if (btrfs_header_generation(buf) == trans->transid && !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) && !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID && - btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC))) + btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)) && + !root->force_cow) return 0; return 1; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b9ba59f..b1cb3c0 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1271,6 +1271,8 @@ struct btrfs_root { * for stat. It may be used for more later */ dev_t anon_dev; + + int force_cow; }; struct btrfs_ioctl_defrag_range_args { diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 6a0574e..81376d9 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -785,6 +785,10 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, btrfs_save_ino_cache(root, trans); + /* see comments in should_cow_block() */ + root->force_cow = 0; + smp_wmb(); + if (root->commit_root != root->node) { mutex_lock(&root->fs_commit_mutex); switch_commit_root(root); @@ -947,6 +951,10 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_tree_unlock(old); free_extent_buffer(old); + /* see comments in should_cow_block() */ + root->force_cow = 1; + smp_wmb(); + btrfs_set_root_node(new_root_item, tmp); /* record when the snapshot was created in key.offset */ key.offset = trans->transid; -- cgit v0.10.2 From c18b7806e4f3373b2f296a65fb19251a3b49a532 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sat, 12 Nov 2011 19:10:43 +0100 Subject: rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP. This is reported to be an RT3070 based device. Reported-by: Teika Kazura Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index f156579..3778763 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -919,6 +919,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x050d, 0x935b) }, /* Buffalo */ { USB_DEVICE(0x0411, 0x00e8) }, + { USB_DEVICE(0x0411, 0x0158) }, { USB_DEVICE(0x0411, 0x016f) }, { USB_DEVICE(0x0411, 0x01a2) }, /* Corega */ -- cgit v0.10.2 From ed66ba472a742cd8df37d7072804b2111cdb1014 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sat, 12 Nov 2011 19:10:44 +0100 Subject: rt2x00: Fix sleep-while-atomic bug in powersaving code. The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672 Tested-by: Tomas Trnka Signed-off-by: Gertjan van Wingerde Cc: Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 2ec5c00..99ff12d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -943,6 +943,7 @@ struct rt2x00_dev { * Powersaving work */ struct delayed_work autowakeup_work; + struct work_struct sleep_work; /* * Data queue arrays for RX, TX, Beacon and ATIM. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e1fb2a8..edd317f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -465,6 +465,23 @@ static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie) return NULL; } +static void rt2x00lib_sleep(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, sleep_work); + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + + /* + * Check again is powersaving is enabled, to prevent races from delayed + * work execution. + */ + if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) + rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, + IEEE80211_CONF_CHANGE_PS); +} + static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct rxdone_entry_desc *rxdesc) @@ -512,8 +529,7 @@ static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, cam |= (tim_ie->bitmap_ctrl & 0x01); if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, - IEEE80211_CONF_CHANGE_PS); + queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work); } static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, @@ -1141,6 +1157,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); + INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); /* * Let the driver probe the device to detect the capabilities. @@ -1197,6 +1214,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) */ cancel_work_sync(&rt2x00dev->intf_work); cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); + cancel_work_sync(&rt2x00dev->sleep_work); if (rt2x00_is_usb(rt2x00dev)) { del_timer_sync(&rt2x00dev->txstatus_timer); cancel_work_sync(&rt2x00dev->rxdone_work); -- cgit v0.10.2 From fe09b32a4361bea44169b2063e8c867cabb6a8ba Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 13 Nov 2011 22:14:32 +0100 Subject: Net, libertas: Resolve memory leak in if_spi_host_to_card() If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by: Jesper Juhl Acked-by: Dan Williams Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 622ae6d..7059d96 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -995,6 +995,7 @@ static int if_spi_host_to_card(struct lbs_private *priv, spin_unlock_irqrestore(&card->buffer_lock, flags); break; default: + kfree(packet); netdev_err(priv->dev, "can't transfer buffer of type %d\n", type); err = -EINVAL; -- cgit v0.10.2 From bc5b8a9003132ae44559edd63a1623b7b99dfb68 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 14 Nov 2011 17:52:08 +0300 Subject: hfs: add sanity check for file name length On a corrupted file system the ->len field could be wrong leading to a buffer overflow. Reported-and-acked-by: Clement LECIGNE Signed-off-by: Dan Carpenter Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c index e673a88..b1ce4c7 100644 --- a/fs/hfs/trans.c +++ b/fs/hfs/trans.c @@ -40,6 +40,8 @@ int hfs_mac2asc(struct super_block *sb, char *out, const struct hfs_name *in) src = in->name; srclen = in->len; + if (srclen > HFS_NAMELEN) + srclen = HFS_NAMELEN; dst = out; dstlen = HFS_MAX_NAMELEN; if (nls_io) { -- cgit v0.10.2 From cfcfc9eca2bcbd26a8e206baeb005b055dbf8e37 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Nov 2011 15:02:59 -0200 Subject: Linux 3.2-rc2 diff --git a/Makefile b/Makefile index 361e4f0..dab8610 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From 731ad81e2dd97e3f222361f7b3ff4b35639e46af Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:37:34 +0900 Subject: USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b21cd37..23a4473 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -469,7 +469,7 @@ config USB_LANGWELL gadget drivers to also be dynamically linked. config USB_EG20T - tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -485,10 +485,11 @@ config USB_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. - This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + This driver also can be used for LAPIS Semiconductor's ML7213 which is for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + ML7831 is for general purpose use. + ML7213/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7831 is completely compatible for Intel EG20T PCH. config USB_CI13XXX_MSM tristate "MIPS USB CI13xxx for MSM" diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 550d6dc..729e974 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -354,6 +354,7 @@ struct pch_udc_dev { #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 #define PCI_VENDOR_ID_ROHM 0x10DB #define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D +#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808 static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -2970,6 +2971,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; -- cgit v0.10.2 From 09b658dcb23efab48af10f85d5003ad3659938bc Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:37:35 +0900 Subject: USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 729e974..5048a0c 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -3005,5 +3005,5 @@ static void __exit pch_udc_pci_exit(void) module_exit(pch_udc_pci_exit); MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); -MODULE_AUTHOR("OKI SEMICONDUCTOR, "); +MODULE_AUTHOR("LAPIS Semiconductor, "); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 0c16595539b612fe948559433dda08ff96a8bdc7 Mon Sep 17 00:00:00 2001 From: wangyanqing Date: Thu, 10 Nov 2011 14:04:08 +0800 Subject: USB: serial: pl2303: rm duplicate id I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by: Wang YanQing Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9083d1e..fc2d66f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3d10d7f..c38b8c0 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -145,10 +145,6 @@ #define ADLINK_VENDOR_ID 0x0b63 #define ADLINK_ND6530_PRODUCT_ID 0x6530 -/* WinChipHead USB->RS 232 adapter */ -#define WINCHIPHEAD_VENDOR_ID 0x4348 -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 - /* SMART USB Serial Adapter */ #define SMART_VENDOR_ID 0x0b8c #define SMART_PRODUCT_ID 0x2303 -- cgit v0.10.2 From 5b061623355d8f69327a24838b0aa05e435ae5d5 Mon Sep 17 00:00:00 2001 From: VU Tuan Duc Date: Tue, 15 Nov 2011 14:08:00 +0700 Subject: USB: option: add id for 3G dongle Model VT1000 of Viettel Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel. Signed-off-by: VU Tuan Duc Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 89ae1f6..b8da93b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -468,6 +468,10 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CLU528 0x260D #define YUGA_PRODUCT_CLU526 0x260F +/* Viettel products */ +#define VIETTEL_VENDOR_ID 0x2262 +#define VIETTEL_PRODUCT_VT1000 0x0002 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1141,6 +1145,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v0.10.2 From bc985c10f388c0e5fb2cff95ff2220721627fbd8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Nov 2011 09:23:26 +0200 Subject: USB: storage: ene_ub6250: fix compile warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: | drivers/usb/storage/ene_ub6250.c: In function ‘ms_scsi_write’: | drivers/usb/storage/ene_ub6250.c:1728:6: warning: ‘result’ may \ | be used uninitialized in this function [-Wuninitialized] | drivers/usb/storage/ene_ub6250.c:1795:77: warning: ‘offset’ may \ | be used uninitialized in this function [-Wuninitialized] Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4dca3ef..9fbe742 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1762,10 +1762,9 @@ static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb) result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1); } else { void *buf; - int offset; + int offset = 0; u16 PhyBlockAddr; u8 PageNum; - u32 result; u16 len, oldphy, newphy; buf = kmalloc(blenByte, GFP_KERNEL); -- cgit v0.10.2 From f64ae042d94d376b54e7a343d93c48561e9d2e16 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 11 Nov 2011 08:33:48 +0800 Subject: slub: use correct parameter to add a page to partial list tail unfreeze_partials() needs add the page to partial list tail, since such page hasn't too many free objects. We now explictly use DEACTIVATE_TO_TAIL for this, while DEACTIVATE_TO_TAIL != 1. This will cause performance regression (eg, more lock contention in node->list_lock) without below fix. Signed-off-by: Shaohua Li Acked-by: Christoph Lameter Acked-by: David Rientjes Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 7d2a996..60e16c4 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1904,7 +1904,8 @@ static void unfreeze_partials(struct kmem_cache *s) if (l == M_PARTIAL) remove_partial(n, page); else - add_partial(n, page, 1); + add_partial(n, page, + DEACTIVATE_TO_TAIL); l = m; } -- cgit v0.10.2 From 9ada19342b2441f290f0043ed7c562682c8c4ede Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 14 Nov 2011 13:34:13 +0800 Subject: slub: move discard_slab out of node lock Lockdep reports there is potential deadlock for slub node list_lock. discard_slab() is called with the lock hold in unfreeze_partials(), which could trigger a slab allocation, which could hold the lock again. discard_slab() doesn't need hold the lock actually, if the slab is already removed from partial list. Acked-by: Christoph Lameter Reported-and-tested-by: Yong Zhang Reported-and-tested-by: Julie Sullivan Signed-off-by: Shaohua Li Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 60e16c4..00efbb5 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1862,7 +1862,7 @@ static void unfreeze_partials(struct kmem_cache *s) { struct kmem_cache_node *n = NULL; struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab); - struct page *page; + struct page *page, *discard_page = NULL; while ((page = c->partial)) { enum slab_modes { M_PARTIAL, M_FREE }; @@ -1916,14 +1916,22 @@ static void unfreeze_partials(struct kmem_cache *s) "unfreezing slab")); if (m == M_FREE) { - stat(s, DEACTIVATE_EMPTY); - discard_slab(s, page); - stat(s, FREE_SLAB); + page->next = discard_page; + discard_page = page; } } if (n) spin_unlock(&n->list_lock); + + while (discard_page) { + page = discard_page; + discard_page = discard_page->next; + + stat(s, DEACTIVATE_EMPTY); + discard_slab(s, page); + stat(s, FREE_SLAB); + } } /* -- cgit v0.10.2 From 584ad00ce4bfe594e4c4a89944b3c635187a1ca1 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:33:13 +0900 Subject: pch_phub: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d593878..5664696 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -472,7 +472,7 @@ config BMP085 module will be called bmp085. config PCH_PHUB - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of @@ -480,12 +480,13 @@ config PCH_PHUB processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor's IOH, + ML7213/ML7223/ML7831. + ML7213 which is for IVI(In-Vehicle Infotainment) use. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. To compile this driver as a module, choose M here: the module will be called pch_phub. diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index dee33ad..b50f48a 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -73,6 +73,9 @@ #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */ #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */ +/* Macros for ML7831 */ +#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801 + /* SROM ACCESS Macro */ #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1)) @@ -763,6 +766,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, chip->pch_opt_rom_start_address =\ PCH_PHUB_ROM_START_ADDR_ML7223; chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223; + } else if (id->driver_data == 5) { /* ML7831 */ + retval = sysfs_create_file(&pdev->dev.kobj, + &dev_attr_pch_mac.attr); + if (retval) + goto err_sysfs_create; + + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto exit_bin_attr; + + /* set the prefech value */ + iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); + /* set the interrupt delay value */ + iowrite32(0x25, chip->pch_phub_base_address + 0x44); + chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T; + chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T; } chip->ioh_type = id->driver_data; @@ -847,6 +866,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5, }, { } }; MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id); -- cgit v0.10.2 From 7f2732c8d7c06f97cc1d530177b7635cb8890b35 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:33:14 +0900 Subject: pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index b50f48a..e7c5995 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,10 +41,10 @@ #define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset (Intel EG20T PCH)*/ #define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address - offset(OKI SEMICONDUCTOR ML7213) + offset(LAPIS Semicon ML7213) */ #define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address - offset(OKI SEMICONDUCTOR ML7223) + offset(LAPIS Semicon ML7223) */ /* MAX number of INT_REDUCE_CONTROL registers */ @@ -893,5 +893,5 @@ static void __exit pch_phub_pci_exit(void) module_init(pch_phub_pci_init); module_exit(pch_phub_pci_exit); -MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"); +MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 9914a0de7a27ef2cb5d9aacfe50ae97ebb532f28 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:12:17 +0900 Subject: pch_phub: Improve ADE(Address Decode Enable) control Currently, external ROM access is enabled/disabled in probe()/remove(). So, when a buggy software access unanticipated memory area, in case of enabling this ADE bit, external ROM memory area can be broken. This patch enables the ADE bit only accessing external ROM area. Signed-off-by: Tomoya MORINAGA Cc: Masayuki Ohtak Cc: Alexander Stein Cc: Denis Turischev Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index e7c5995..0e2c181 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -118,6 +118,7 @@ * @pch_mac_start_address: MAC address area start address * @pch_opt_rom_start_address: Option ROM start address * @ioh_type: Save IOH type + * @pdev: pointer to pci device struct */ struct pch_phub_reg { u32 phub_id_reg; @@ -139,6 +140,7 @@ struct pch_phub_reg { u32 pch_mac_start_address; u32 pch_opt_rom_start_address; int ioh_type; + struct pci_dev *pdev; }; /* SROM SPEC for MAC address assignment offset */ @@ -501,6 +503,7 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, unsigned int orom_size; int ret; int err; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(container_of(kobj, struct device, kobj)); @@ -512,6 +515,10 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, } /* Get Rom signature */ + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + goto exrom_map_err; + pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address, (unsigned char *)&rom_signature); rom_signature &= 0xff; @@ -542,10 +549,13 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, goto return_err; } return_ok: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); mutex_unlock(&pch_phub_mutex); return addr_offset; return_err: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); +exrom_map_err: mutex_unlock(&pch_phub_mutex); return_err_nomutex: return err; @@ -558,6 +568,7 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, int err; unsigned int addr_offset; int ret; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(container_of(kobj, struct device, kobj)); @@ -574,6 +585,12 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, goto return_ok; } + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) { + err = -ENOMEM; + goto exrom_map_err; + } + for (addr_offset = 0; addr_offset < count; addr_offset++) { if (PCH_PHUB_OROM_SIZE < off + addr_offset) goto return_ok; @@ -588,10 +605,14 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, } return_ok: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); mutex_unlock(&pch_phub_mutex); return addr_offset; return_err: + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); + +exrom_map_err: mutex_unlock(&pch_phub_mutex); return err; } @@ -601,8 +622,14 @@ static ssize_t show_pch_mac(struct device *dev, struct device_attribute *attr, { u8 mac[8]; struct pch_phub_reg *chip = dev_get_drvdata(dev); + ssize_t rom_size; + + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + return -ENOMEM; pch_phub_read_gbe_mac_addr(chip, mac); + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); return sprintf(buf, "%pM\n", mac); } @@ -611,6 +638,7 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u8 mac[6]; + ssize_t rom_size; struct pch_phub_reg *chip = dev_get_drvdata(dev); if (count != 18) @@ -620,7 +648,12 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr, (u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3], (u32 *)&mac[4], (u32 *)&mac[5]); + chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); + if (!chip->pch_phub_extrom_base_address) + return -ENOMEM; + pch_phub_write_gbe_mac_addr(chip, mac); + pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address); return count; } @@ -643,7 +676,6 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, int retval; int ret; - ssize_t rom_size; struct pch_phub_reg *chip; chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL); @@ -680,19 +712,7 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, "in pch_phub_base_address variable is %p\n", __func__, chip->pch_phub_base_address); - if (id->driver_data != 3) { - chip->pch_phub_extrom_base_address =\ - pci_map_rom(pdev, &rom_size); - if (chip->pch_phub_extrom_base_address == 0) { - dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__); - ret = -ENOMEM; - goto err_pci_map; - } - dev_dbg(&pdev->dev, "%s : " - "pci_map_rom SUCCESS and value in " - "pch_phub_extrom_base_address variable is %p\n", - __func__, chip->pch_phub_extrom_base_address); - } + chip->pdev = pdev; /* Save pci device struct */ if (id->driver_data == 1) { /* EG20T PCH */ const char *board_name; @@ -792,8 +812,6 @@ exit_bin_attr: sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); err_sysfs_create: - pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address); -err_pci_map: pci_iounmap(pdev, chip->pch_phub_base_address); err_pci_iomap: pci_release_regions(pdev); @@ -811,7 +829,6 @@ static void __devexit pch_phub_remove(struct pci_dev *pdev) sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr); - pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address); pci_iounmap(pdev, chip->pch_phub_base_address); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v0.10.2 From 2a9887919457c6e1bd482e8448223be59d19010a Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:12:18 +0900 Subject: pch_phub: Fix MAC address writing issue for LAPIS ML7831 ISSUE: Using ML7831, MAC address writing doesn't work well. CAUSE: ML7831 and EG20T have the same register map for MAC address access. However, this driver processes the writing the same as ML7223. This is not true. This driver must process the writing the same as EG20T. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Cc: Masayuki Ohtak Cc: Alexander Stein Cc: Denis Turischev Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 0e2c181..10fc478 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -476,7 +476,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data) int retval; int i; - if (chip->ioh_type == 1) /* EG20T */ + if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/ retval = pch_phub_gbe_serial_rom_conf(chip); else /* ML7223 */ retval = pch_phub_gbe_serial_rom_conf_mp(chip); -- cgit v0.10.2 From 7b08fae8fbf0c14f003be8e039ed37bcbae4415a Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Tue, 1 Nov 2011 11:15:40 -0700 Subject: device.h: Fix struct member documentation Fix warning of make xmldocs of documention of the struct member iommu_ops from struct bus_type. Signed-off-by: Marcos Paulo de Souza Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/device.h b/include/linux/device.h index ffbcf95..2b88320 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -69,7 +69,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); * @resume: Called to bring a device on this bus out of sleep mode. * @pm: Power management operations of this bus, callback the specific * device driver's pm-ops. - * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU + * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU * driver implementations to a bus and allow the driver to do * bus-specific setup * @p: The private data of the driver core, only the driver core can -- cgit v0.10.2 From b2433d861eaf349f4dcdc9281e75b139c1809dd3 Mon Sep 17 00:00:00 2001 From: Geoff Thorpe Date: Wed, 2 Nov 2011 11:44:44 -0400 Subject: uio: documentation fixups The 'name' attribute of struct uio_mem wasn't documented, and the note about 'kobj' is stale and needs to be changed to 'map'. Signed-off-by: Geoff Thorpe Signed-off-by: "Hans J. Koch" Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 54883de..ac3d001 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -521,6 +521,11 @@ Here's a description of the fields of struct uio_mem: +const char *name: Optional. Set this to help identify +the memory region, it will show up in the corresponding sysfs node. + + + int memtype: Required if the mapping is used. Set this to UIO_MEM_PHYS if you you have physical memory on your card to be mapped. Use UIO_MEM_LOGICAL for logical @@ -553,7 +558,7 @@ instead to remember such an address. -Please do not touch the kobj element of +Please do not touch the map element of struct uio_mem! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. -- cgit v0.10.2 From b872a37437e93df9d112ce674752b3b3a0a17020 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 09:33:56 -0500 Subject: drm/radeon: add some missing FireMV pci ids Noticed by Egbert. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Egbert Eich Signed-off-by: Dave Airlie diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 3d53efd..f81676f 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -4,6 +4,7 @@ */ #define radeon_PCI_IDS \ {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ + {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -55,6 +56,7 @@ {0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \ + {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \ {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ -- cgit v0.10.2 From 6c47e5c23aa2a7c54ad7ac13af4bd56cd9e703bf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 14:32:01 -0500 Subject: drm/radeon/kms: fix up gpio i2c mask bits for r4xx Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Jean Delvare Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index d2d1792..0a4ec1e 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -85,6 +85,18 @@ static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rd for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + /* some evergreen boards have bad data for this entry */ if (ASIC_IS_DCE4(rdev)) { if ((i == 7) && -- cgit v0.10.2 From 6991b8f2a3193397461104a27be417addb8d032b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Nov 2011 17:52:51 -0500 Subject: drm/radeon/kms: fix segfault in pm rework Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 0a4ec1e..fecd705 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2008,14 +2008,14 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) return state_index; /* last mode is usually default, array is low to high */ for (i = 0; i < num_modes; i++) { + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; + rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; switch (frev) { case 1: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = @@ -2051,11 +2051,6 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 2: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = @@ -2092,11 +2087,6 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 3: - rdev->pm.power_state[state_index].clock_info = - kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); - if (!rdev->pm.power_state[state_index].clock_info) - return state_index; - rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock); rdev->pm.power_state[state_index].clock_info[0].sclk = -- cgit v0.10.2 From 52b3bfc69efc44447ed2db25dd999aef64b3c970 Mon Sep 17 00:00:00 2001 From: Lucas Kannebley Tavares Date: Fri, 28 Oct 2011 13:52:08 -0200 Subject: jsm: Change maintainership Breno Leitao has passed the maintainership on to me. Signed-off-by: Lucas Kannebley Tavares Acked-by: Breno Leitao Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..cc6a466 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3710,7 +3710,7 @@ F: fs/jbd2/ F: include/linux/jbd2.h JSM Neo PCI based serial card -M: Breno Leitao +M: Lucas Tavares L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/jsm/ -- cgit v0.10.2 From c2a3e84f950e7ddba1f3914b005861d46ae60359 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 19:19:43 -0700 Subject: tty: hvc_dcc: Fix duplicate character inputs Reading from the DCC grabs a character from the buffer and clears the status bit. Since this is a context-changing operation, instructions following the character read that rely on the status bit being accurate need to be synchronized with an ISB. In this case, the status bit check needs to execute after the character read otherwise we run the risk of reading the character and checking the status bit before the read can clear the status bit in the first place. When this happens, the user will see the same character they typed twice, instead of once. Add an ISB after the read and the write, so that the status check is synchronized with the read/write operations. Signed-off-by: Stephen Boyd Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 435f6fa..44fbeba 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -46,6 +46,7 @@ static inline char __dcc_getchar(void) asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); + isb(); return __c; } @@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c) asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); + isb(); } static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) -- cgit v0.10.2 From a1d7cfe29f13cf45f8094929864b9c66bf0cd91b Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 27 Oct 2011 15:45:18 +0900 Subject: pch_uart: Fix hw-flow control issue Using hardware flow control, currently, register of the control-bit(AFE) is not set. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 21febef..2f07a67 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1280,6 +1280,7 @@ static void pch_uart_set_termios(struct uart_port *port, if (rtn) goto out; + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); -- cgit v0.10.2 From 8249f743f732ccbc3056428945ab1d9bd36d46bf Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:49 +0900 Subject: pch_uart: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5f479da..925a1e5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1560,7 +1560,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI select SERIAL_CORE help @@ -1568,12 +1568,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2f07a67..2ef0e7d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -258,6 +258,8 @@ enum pch_uart_num_t { pch_ml7213_uart2, pch_ml7223_uart0, pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, }; static struct pch_uart_driver_data drv_dat[] = { @@ -270,6 +272,8 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; static unsigned int default_baud = 9600; @@ -1553,6 +1557,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = pch_ml7223_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, {0,}, }; -- cgit v0.10.2 From eca9dfa846a3d0eeb865e290851f4bfe4fb34fdd Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 28 Oct 2011 09:38:50 +0900 Subject: pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2ef0e7d..ac852b5 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1,5 +1,5 @@ /* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * *This program is free software; you can redistribute it and/or modify *it under the terms of the GNU General Public License as published by @@ -46,8 +46,8 @@ enum { /* Set the max number of UART port * Intel EG20T PCH: 4 port - * OKI SEMICONDUCTOR ML7213 IOH: 3 port - * OKI SEMICONDUCTOR ML7223 IOH: 2 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port */ #define PCH_UART_NR 4 -- cgit v0.10.2 From 9636b755da7b498094bdf15b4ce9f6fd16995e4e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Tue, 11 Oct 2011 17:05:43 -0700 Subject: tty/serial: Prevent drop of DCD on suspend for Tegra UARTs On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not externally accessible. Instead, the DTR line internally appears to be looped back to be the input to the DCD and DSR lines. The net effect of this is that when we drop DTR (like when we suspend), we'll see DCD drop too. ...and when we see DCD drop, we treat that as a hangup. In order to prevent this hangup from occurring at every sleep, we need to force DTR to remain high on Tegra UARTs. This patch uses the mcr_mask / mcr_force fields, which were originally added for the kludge ALPHA_KLUDGE_MCR. Using these fields does not prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if" tests I have added and always init mcr_mask / mcr_force from the serial8250_config. NOTE: If we have people that are using UARTA on a Tegra and need to control DTR, we'll need to either add a separate port type for UARTA or we'll need to add some tegra-specific code to detect whether the DTR needs to be left high. Signed-off-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index eeadf1b..2b0a4b6 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,6 +308,8 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + .mcr_mask = ~UART_MCR_DTR, + .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1229,6 +1231,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1987,6 +1993,10 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[up->port.type].mcr_mask; + up->mcr_force = uart_config[up->port.type].mcr_force; + } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2793,6 +2803,10 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; + if (!ALPHA_KLUDGE_MCR) { + up->mcr_mask = uart_config[type].mcr_mask; + up->mcr_force = uart_config[type].mcr_force; + } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 6edf4a6..1f75100 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,6 +35,8 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; + unsigned char mcr_mask; + unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -- cgit v0.10.2 From 604fdb75094a7367e1794fd0f62183380364ce13 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Nov 2011 13:17:55 +0000 Subject: serial,mfd: Fix CMSPAR setup This is referenced the wrong way. Mika Westerberg added some checks to the tty to support multiple console, but the real problem is simply referencing the termios object via the wrong path. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 286c386..e272d39 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -884,7 +884,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, { struct uart_hsu_port *up = container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -907,8 +906,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, } /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; + termios->c_cflag &= ~CMSPAR; if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; -- cgit v0.10.2 From 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 11 Nov 2011 10:55:27 +0900 Subject: pch_uart: Fix DMA resource leak issue Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get DMA channel resource. setserial /dev/ttyPCH0 ^low_latency setserial /dev/ttyPCH0 low_latency CAUSE: Changing mode using setserial command, ".startup" function which gets DMA channel is called before ".verify_port" function which sets dma-flag(use_dma/use_dma_flag) as 1. PIO->DMA .startup: Since dma-flag is 0, DMA channel is not requested. .verify_port: dma-flag is set as 1. .shutdown: N/A DMA->PIO .startup: Since dma-flag is 1, DMA channel is requested. .verify_port: dma-flag is set as 0. .shutdown: Since dma-flag is 0, DMA channel is not released. This means DMA channel resource leak occurs. Next time, this driver can't get DMA channel resource forever. MODIFICATION: Currently, when release DMA channel resource, this driver checks dma-flag. However, this specification occurs the above issue. This driver must check whether dma_request_channel is executed or not. The values are saved in private data variable "chan_tx/chan_tx". These variables mean if the value is NULL, DMA channel is not requested, if not NULL, DMA channel is requested. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index ac852b5..d6aba8c 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -632,6 +632,7 @@ static void pch_request_dma(struct uart_port *port) dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", __func__); dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; return; } @@ -1219,8 +1220,7 @@ static void pch_uart_shutdown(struct uart_port *port) dev_err(priv->port.dev, "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - if (priv->use_dma_flag) - pch_free_dma(port); + pch_free_dma(port); free_irq(priv->port.irq, priv); } -- cgit v0.10.2 From 93f3350c46fa5dfcc9650eb19b186e71ffc924c3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Wed, 9 Nov 2011 15:51:49 +0100 Subject: RS485: fix inconsistencies in the meaning of some variables The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the serial_rs485 structure in a different way. In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead, uses these values to know if a delay must be set before and after sending. This patch makes the usage of these variables consistent across all drivers and fixes the Documentation as well. From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be understood by looking only at the value of delay_rts_before_send and delay_rts_after_send. Signed-off-by: Claudio Scordino Signed-off-by: Darron Black Acked-by: Jesper Nilsson Acked-by: Nicolas Ferre Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 079cb3d..41c8378 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -97,15 +97,23 @@ struct serial_rs485 rs485conf; - /* Set RS485 mode: */ + /* Enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + /* Set rts delay before send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; rs485conf.delay_rts_before_send = ...; /* Set rts delay after send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; rs485conf.delay_rts_after_send = ...; /* Set this flag if you want to receive data even whilst sending data */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4a0f86f..4c823f3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + if ((rs485conf->delay_rts_after_send) > 0) UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { @@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; - if (rs485conf->delay_rts_before_send == 0 && - rs485conf->delay_rts_after_send == 0) { - rs485conf->flags |= SER_RS485_RTS_ON_SEND; - } else { - if (rs485conf->delay_rts_before_send) - rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND; - if (rs485conf->delay_rts_after_send) - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b743504..1dfba7b 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty, e100_disable_rx(info); e100_enable_rx_irq(info); #endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); } #endif /* CONFIG_ETRAX_RS485 */ @@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty, rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); if (rs485ctrl.enabled) rs485data.flags |= SER_RS485_ENABLED; @@ -4531,7 +4526,6 @@ static int __init rs_init(void) /* Set sane defaults */ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); info->rs485.delay_rts_before_send = 0; info->rs485.flags &= ~(SER_RS485_ENABLED); #endif diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e2..3d86517 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; -- cgit v0.10.2 From db3e74b582915d66e10b0c73a62763418f54c340 Mon Sep 17 00:00:00 2001 From: Mitsuo Hayasaka Date: Thu, 10 Nov 2011 01:33:10 +0000 Subject: xfs: use doalloc flag in xfs_qm_dqattach_one() The doalloc arg in xfs_qm_dqattach_one() is a flag that indicates whether a new area to handle quota information will be allocated if needed. Originally, it was passed to xfs_qm_dqget(), but has been removed by the following commit (probably by mistake): commit 8e9b6e7fa4544ea8a0e030c8987b918509c8ff47 Author: Christoph Hellwig Date: Sun Feb 8 21:51:42 2009 +0100 xfs: remove the unused XFS_QMOPT_DQLOCK flag As the result, xfs_qm_dqget() called from xfs_qm_dqattach_one() never allocates the new area even if it is needed. This patch gives the doalloc arg to xfs_qm_dqget() in xfs_qm_dqattach_one() to fix this problem. Signed-off-by: Mitsuo Hayasaka Cc: Alex Elder Cc: Christoph Hellwig Reviewed-by: Christoph Hellwig Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index 5cff443..0bbb1a4 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -674,7 +674,8 @@ xfs_qm_dqattach_one( * disk and we didn't ask it to allocate; * ESRCH if quotas got turned off suddenly. */ - error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp); + error = xfs_qm_dqget(ip->i_mount, ip, id, type, + doalloc | XFS_QMOPT_DOWARN, &dqp); if (error) return error; -- cgit v0.10.2 From af8db1508f2c9f3b6e633e2d2d906c6557c617f9 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 15 Nov 2011 21:52:29 +0100 Subject: PM / driver core: disable device's runtime PM during shutdown There may be an issue when the user issue "reboot/shutdown" command, then the device has shut down its hardware, after that, this runtime-pm featured device's driver will probably be scheduled to do its suspend routine, and at its suspend routine, it may access hardware, but the device has already shutdown physically, then the system hang may be occurred. I ran out this issue using an auto-suspend supported USB devices, like 3G modem, keyboard. The usb runtime suspend routine may be scheduled after the usb controller has been shut down, and the usb runtime suspend routine will try to suspend its roothub(controller), it will access register, then the system hang occurs as the controller is shutdown. Signed-off-by: Peter Chen Acked-by: Ming Lei Acked-by: Greg Kroah-Hartman Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/core.c b/drivers/base/core.c index 82c86545..d8b3d89 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "base.h" #include "power/power.h" @@ -1742,6 +1743,8 @@ void device_shutdown(void) */ list_del_init(&dev->kobj.entry); spin_unlock(&devices_kset->list_lock); + /* Disable all device's runtime power management */ + pm_runtime_disable(dev); if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); -- cgit v0.10.2 From e88d2468718b0789b4c33da2f7e1cef2a1eee279 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Nov 2011 12:57:00 -0800 Subject: sparc: Stash orig_i0 into %g6 instead of %g2 As per the comments added by this commit, %g2 turns out to not be a usable place to save away orig_i0 for syscall restart handling. In fact all of %g2, %g3, %g4, and %g5 are assumed to be saved across a system call by various bits of code in glibc. %g1 can't be used because that holds the syscall number, which would need to be saved and restored for syscall restart handling too, and that would only compound our problems :-) This leaves us with %g6 and %g7 which are for "system use". %g7 is used as the "thread register" by glibc, but %g6 is used as a compiler and assembler temporary scratch register. And in no instance is %g6 used to hold a value across a system call. Therefore %g6 is safe for storing away orig_i0, at least for now. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 2e86fd1..023b886 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -837,7 +837,7 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs) if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } if (signr > 0) { diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 7dfaff6..d54c6e5 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -523,12 +523,22 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * register for GDB to save and restore in order to get * orig_i0 correct for syscall restarts when debugging. * - * However, we luckily can use the fact that several registers - * are volatile across system calls. One such register is - * %g2, so use that as a place to save away orig_i0. + * Although it should be the case that most of the global + * registers are volatile across a system call, glibc already + * depends upon that fact that we preserve them. So we can't + * just use any global register to save away the orig_i0 value. + * + * In particular %g2, %g3, %g4, and %g5 are all assumed to be + * preserved across a system call trap by various pieces of + * code in glibc. + * + * %g7 is used as the "thread register". %g6 is not used in + * any fixed manner. %g6 is used as a scratch register and + * a compiler temporary, but it's value is never used across + * a system call. Therefore %g6 is usable for orig_i0 storage. */ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) - regs->u_regs[UREG_G2] = orig_i0; + regs->u_regs[UREG_G6] = orig_i0; if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; @@ -544,7 +554,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) restart_syscall = 0; if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 1ddf0de..f0836cd 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -533,13 +533,23 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * register for GDB to save and restore in order to get * orig_i0 correct for syscall restarts when debugging. * - * However, we luckily can use the fact that several registers - * are volatile across system calls. One such register is - * %g2, so use that as a place to save away orig_i0. + * Although it should be the case that most of the global + * registers are volatile across a system call, glibc already + * depends upon that fact that we preserve them. So we can't + * just use any global register to save away the orig_i0 value. + * + * In particular %g2, %g3, %g4, and %g5 are all assumed to be + * preserved across a system call trap by various pieces of + * code in glibc. + * + * %g7 is used as the "thread register". %g6 is not used in + * any fixed manner. %g6 is used as a scratch register and + * a compiler temporary, but it's value is never used across + * a system call. Therefore %g6 is usable for orig_i0 storage. */ if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) - regs->u_regs[UREG_G2] = orig_i0; + regs->u_regs[UREG_G6] = orig_i0; if (current_thread_info()->status & TS_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; @@ -560,7 +570,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) if (pt_regs_is_syscall(regs) && (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) { restart_syscall = 1; - orig_i0 = regs->u_regs[UREG_G2]; + orig_i0 = regs->u_regs[UREG_G6]; } if (signr > 0) { -- cgit v0.10.2 From 3486140e30fcc16c0b8cd9545fbe5e2e66bf6941 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:39 +0000 Subject: net-next:asix:PHY_MODE_RTL8211CL should be 0xC Use correct value for rtl phy support. (rtl phy are in AX88178 devices like NWU220G and USB2-ET1000). Signed-off-by: Allan Chou Tested-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e81e22e..873860d 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -163,7 +163,7 @@ #define MARVELL_CTRL_TXDELAY 0x0002 #define MARVELL_CTRL_RXDELAY 0x0080 -#define PHY_MODE_RTL8211CL 0x0004 +#define PHY_MODE_RTL8211CL 0x000C /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct asix_data { -- cgit v0.10.2 From a77929a278651d4451c872178d4d7aac8908aa8e Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:40 +0000 Subject: net-next:asix:poll in asix_get_phyid in case phy not ready Sometimes the phy isn't ready after reset...poll and pray it will be soon. Signed-off-by: Freddy Xin Signed-off-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 873860d..b4675e8 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -652,9 +652,17 @@ static u32 asix_get_phyid(struct usbnet *dev) { int phy_reg; u32 phy_id; + int i; - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); - if (phy_reg < 0) + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) return 0; phy_id = (phy_reg & 0xffff) << 16; -- cgit v0.10.2 From d3665188a79254c0698aa161e2c36dcda4e9ef55 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:41 +0000 Subject: net-next:asix: reduce AX88772 init time by about 2 seconds ax88772_reset takes about 2 seconds and is called twice. Once from ax88772_bind() directly and again indirectly from usbnet_open(). Reset the USB FW/Phy enough to blink the LEDs when inserted. Signed-off-by: Allan Chou Signed-off-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index b4675e8..8462be5 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1083,7 +1083,7 @@ static const struct net_device_ops ax88772_netdev_ops = { static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { - int ret; + int ret, embd_phy; struct asix_data *data = (struct asix_data *)&dev->data; u8 buf[ETH_ALEN]; u32 phyid; @@ -1108,16 +1108,36 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.reg_num_mask = 0x1f; dev->mii.phy_id = asix_get_phy_addr(dev); - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - dev->net->netdev_ops = &ax88772_netdev_ops; dev->net->ethtool_ops = &ax88772_ethtool_ops; - ret = ax88772_reset(dev); + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + + /* Reset the PHY to normal operation mode */ + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + return ret; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); if (ret < 0) return ret; + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { /* hard_mtu is still the default - the device does not support -- cgit v0.10.2 From b2d3ad291fab1783cc12eef3dd91c5fa98c2e5d5 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:42 +0000 Subject: net-next:asix: V2 more fixes for ax88178 phy init sequence Now works on Samsung Series 5 (chromebook) Two fixes here: o use 0x7F mask for phymode o read phyid *AFTER* phy is powered up (via GPIOs) Signed-off-by: Allan Chou Signed-off-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 8462be5..f870ab9 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1248,6 +1248,7 @@ static int ax88178_reset(struct usbnet *dev) __le16 eeprom; u8 status; int gpio0 = 0; + u32 phyid; asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); dbg("GPIO Status: 0x%04x", status); @@ -1263,12 +1264,13 @@ static int ax88178_reset(struct usbnet *dev) data->ledmode = 0; gpio0 = 1; } else { - data->phymode = le16_to_cpu(eeprom) & 7; + data->phymode = le16_to_cpu(eeprom) & 0x7F; data->ledmode = le16_to_cpu(eeprom) >> 8; gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; } dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); + /* Power up external GigaPHY through AX88178 GPIO pin */ asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); if ((le16_to_cpu(eeprom) >> 8) != 1) { asix_write_gpio(dev, 0x003c, 30); @@ -1280,6 +1282,13 @@ static int ax88178_reset(struct usbnet *dev) asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); } + /* Read PHYID register *AFTER* powering up PHY */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ + asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); + asix_sw_reset(dev, 0); msleep(150); @@ -1424,7 +1433,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; u8 buf[ETH_ALEN]; - u32 phyid; struct asix_data *data = (struct asix_data *)&dev->data; data->eeprom_len = AX88772_EEPROM_LEN; @@ -1451,12 +1459,12 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->netdev_ops = &ax88178_netdev_ops; dev->net->ethtool_ops = &ax88178_ethtool_ops; - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); + /* Blink LEDS so users know driver saw dongle */ + asix_sw_reset(dev, 0); + msleep(150); - ret = ax88178_reset(dev); - if (ret < 0) - return ret; + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { -- cgit v0.10.2 From 46993f02d88ae9fc6dfb4e8625d80a1630e7863b Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Tue, 15 Nov 2011 07:12:43 +0000 Subject: net-next:asix: V2 Update VERSION Only update VERSION to reflect previous changes. Signed-off-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index f870ab9..e6fed4d 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -36,7 +36,7 @@ #include #include -#define DRIVER_VERSION "26-Sep-2011" +#define DRIVER_VERSION "08-Nov-2011" #define DRIVER_NAME "asix" /* ASIX AX8817X based USB 2.0 Ethernet Devices */ -- cgit v0.10.2 From 6edf0c9b1c26d047370cf2f35ff6bb3082243ec3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 15 Nov 2011 16:01:09 -0800 Subject: Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" This reverts commit 9636b755da7b498094bdf15b4ce9f6fd16995e4e. It wasn't supposed to be applied, thanks to Doug for letting me know. Cc: Doug Anderson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 2b0a4b6..eeadf1b 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -308,8 +308,6 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01, .flags = UART_CAP_FIFO | UART_CAP_RTOIE, - .mcr_mask = ~UART_MCR_DTR, - .mcr_force = UART_MCR_DTR, }, [PORT_XR17D15X] = { .name = "XR17D15X", @@ -1231,10 +1229,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) up->port.fifosize = uart_config[up->port.type].fifo_size; up->capabilities = uart_config[up->port.type].flags; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } if (up->port.type == PORT_UNKNOWN) goto out; @@ -1993,10 +1987,6 @@ static int serial8250_startup(struct uart_port *port) up->port.fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[up->port.type].mcr_mask; - up->mcr_force = uart_config[up->port.type].mcr_force; - } up->mcr = 0; if (up->port.iotype != up->cur_iotype) @@ -2803,10 +2793,6 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) up->port.fifosize = uart_config[type].fifo_size; up->capabilities = uart_config[type].flags; up->tx_loadsz = uart_config[type].tx_loadsz; - if (!ALPHA_KLUDGE_MCR) { - up->mcr_mask = uart_config[type].mcr_mask; - up->mcr_force = uart_config[type].mcr_force; - } } static void __init diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 1f75100..6edf4a6 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -35,8 +35,6 @@ struct serial8250_config { unsigned short tx_loadsz; unsigned char fcr; unsigned int flags; - unsigned char mcr_mask; - unsigned char mcr_force; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -- cgit v0.10.2 From 9f35a33b8d06263a165efe3541d9aa0cdbd70b3b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 15 Nov 2011 22:09:45 +0000 Subject: KEYS: Fix a NULL pointer deref in the user-defined key type Fix a NULL pointer deref in the user-defined key type whereby updating a negative key into a fully instantiated key will cause an oops to occur when the code attempts to free the non-existent old payload. This results in an oops that looks something like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] __call_rcu+0x11/0x13e PGD 3391d067 PUD 3894a067 PMD 0 Oops: 0002 [#1] SMP CPU 1 Pid: 4354, comm: keyctl Not tainted 3.1.0-fsdevel+ #1140 /DG965RY RIP: 0010:[] [] __call_rcu+0x11/0x13e RSP: 0018:ffff88003d591df8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000006e RDX: ffffffff8161d0c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003d591e18 R08: 0000000000000000 R09: ffffffff8152fa6c R10: 0000000000000000 R11: 0000000000000300 R12: ffff88003b8f9538 R13: ffffffff8161d0c0 R14: ffff88003b8f9d50 R15: ffff88003c69f908 FS: 00007f97eb18c720(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000003d47a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process keyctl (pid: 4354, threadinfo ffff88003d590000, task ffff88003c78a040) Stack: ffff88003e0ffde0 ffff88003b8f9538 0000000000000001 ffff88003b8f9d50 ffff88003d591e28 ffffffff810860f0 ffff88003d591e68 ffffffff8117bfea ffff88003d591e68 ffffffff00000000 ffff88003e0ffde1 ffff88003e0ffde0 Call Trace: [] call_rcu_sched+0x10/0x12 [] user_update+0x8d/0xa2 [] key_create_or_update+0x236/0x270 [] sys_add_key+0x123/0x17e [] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells Acked-by: Jeff Layton Acked-by: Neil Horman Acked-by: Steve Dickson Acked-by: James Morris Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c index 5b366d7..69ff52c 100644 --- a/security/keys/user_defined.c +++ b/security/keys/user_defined.c @@ -102,7 +102,8 @@ int user_update(struct key *key, const void *data, size_t datalen) key->expiry = 0; } - kfree_rcu(zap, rcu); + if (zap) + kfree_rcu(zap, rcu); error: return ret; -- cgit v0.10.2 From cb871513f656bdfc48b185b55f37857b5c750c40 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 15 Nov 2011 14:35:52 -0800 Subject: Revert "leds: save the delay values after a successful call to blink_set()" Revert commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d. The problem this patch intends to solve has alreadqy been fixed by commit 7a5caabd090b ("drivers/leds/ledtrig-timer.c: fix broken sysfs delay handling"). Signed-off-by: Johan Hovold Cc: Antonio Ospite Cc: Johannes Berg Cc: Richard Purdie Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 661b692..6d5628b 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -270,11 +270,8 @@ void led_blink_set(struct led_classdev *led_cdev, del_timer_sync(&led_cdev->blink_timer); if (led_cdev->blink_set && - !led_cdev->blink_set(led_cdev, delay_on, delay_off)) { - led_cdev->blink_delay_on = *delay_on; - led_cdev->blink_delay_off = *delay_off; + !led_cdev->blink_set(led_cdev, delay_on, delay_off)) return; - } /* blink with 1 Hz as default if nothing specified */ if (!*delay_on && !*delay_off) -- cgit v0.10.2 From 12340313cf940e61beb52b996a5845ffa290626d Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 15 Nov 2011 14:35:59 -0800 Subject: MAINTAINERS: add new cgroup list to CC notice As discussed at Kernel Summit(2011), new cgroups mailing list is opened by James. This list is for discussing general cgroup design and patches including all subsystems and for getting more attentions to cgroups/namespaces related issues by developpers. Signed-off-by: KAMEZAWA Hiroyuki Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 071a996..aca136b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1930,6 +1930,7 @@ CONTROL GROUPS (CGROUPS) M: Paul Menage M: Li Zefan L: containers@lists.linux-foundation.org +L: cgroups@vger.kernel.org S: Maintained F: include/linux/cgroup* F: kernel/cgroup* @@ -4304,6 +4305,7 @@ MEMORY RESOURCE CONTROLLER M: Balbir Singh M: Daisuke Nishimura M: KAMEZAWA Hiroyuki +L: cgroups@vger.kernel.org L: linux-mm@kvack.org S: Maintained F: mm/memcontrol.c -- cgit v0.10.2 From 001ef5e4554b851cf50fe03bc4c266c28ed8e62d Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 15 Nov 2011 14:36:02 -0800 Subject: drivers/misc/eeprom: fix dependecy on 'PPC_MPC5200_GPIO' The driver for the DigsyMTC display configuration EEPROMs device got added by commit 469dded183 ("misc/eeprom: add eeprom access driver for digsy_mtc board"). Its Kconfig symbol depends on PPC_MPC5200_GPIO. But at the time that driver got added PPC_MPC5200_GPIO was already renamed to GPIO_MPC5200, by commit 6eae1ace68 ("gpio: Move mpc5200 gpio driver to drivers/gpio"). So make this driver depend on GPIO_MPC5200. And since GPIO_MPC5200 itself implies that GPIOLIB is set, that dependency can be dropped. Signed-off-by: Paul Bolle Acked-by: Anatolij Gustschin Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 26cf12c..701edf6 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -85,7 +85,7 @@ config EEPROM_93XX46 config EEPROM_DIGSY_MTC_CFG bool "DigsyMTC display configuration EEPROMs device" - depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO + depends on GPIO_MPC5200 && SPI_GPIO help This option enables access to display configuration EEPROMs on digsy_mtc board. You have to additionally select Microwire -- cgit v0.10.2 From 5aecc85abdb9ac2b0e6548d13652a34142e7ae89 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 15 Nov 2011 14:36:07 -0800 Subject: oom: do not kill tasks with oom_score_adj OOM_SCORE_ADJ_MIN Commit c9f01245 ("oom: remove oom_disable_count") has removed the oom_disable_count counter which has been used for early break out from oom_badness so we could never select a task with oom_score_adj set to OOM_SCORE_ADJ_MIN (oom disabled). Now that the counter is gone we are always going through heuristics calculation and we always return a non zero positive value. This means that we can end up killing a task with OOM disabled because it is indistinguishable from regular tasks with 1% resp. CAP_SYS_ADMIN tasks with 3% usage of memory or tasks with oom_score_adj set but OOM enabled. Let's break out early if the task should have OOM disabled. Signed-off-by: Michal Hocko Acked-by: David Rientjes Acked-by: KOSAKI Motohiro Cc: Oleg Nesterov Cc: Ying Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 471dedb..76f2c5a 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -185,6 +185,11 @@ unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem, if (!p) return 0; + if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) { + task_unlock(p); + return 0; + } + /* * The memory controller may have a limit of 0 bytes, so avoid a divide * by zero, if necessary. -- cgit v0.10.2 From 66e13e66b6c4e5b2ecd6225e1f8437640cfb6498 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 15 Nov 2011 14:36:09 -0800 Subject: drivers/firmware/dmi_scan.c: make dmi_name_in_vendors more focused The current implementation of dmi_name_in_vendors() is an invitation to lazy coding and false positives [1]. Searching for a string in 8 know what you're looking for, so you should know where to look. strstr isn't fast, especially when it fails, so we should avoid calling it when it just can't succeed. Looking at the current users of the function, it seems clear to me that they are looking for a system or board vendor name, so let's limit dmi_name_in_vendors to these two DMI fields. This much better matches the function name, BTW. [1] We currently have code looking for short names in DMI data, such as "IBM", "ASUS" or "Acer". I let you guess what will happen the day other vendors ship products named, for example, "SCHREIBMEISTER", "PEGASUS" or "Acerola". Signed-off-by: Jean Delvare Cc: Andi Kleen Cc: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index bcb1126..153980b 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -585,14 +585,12 @@ int dmi_name_in_serial(const char *str) } /** - * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information. + * dmi_name_in_vendors - Check if string is in the DMI system or board vendor name * @str: Case sensitive Name */ int dmi_name_in_vendors(const char *str) { - static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR, - DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR, - DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE }; + static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE }; int i; for (i = 0; fields[i] != DMI_NONE; i++) { int f = fields[i]; -- cgit v0.10.2 From ea4039a34c4c206d015d34a49d0b00868e37db1d Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Tue, 15 Nov 2011 14:36:12 -0800 Subject: hugetlb: release pages in the error path of hugetlb_cow() If we fail to prepare an anon_vma, the {new, old}_page should be released, or they will leak. Signed-off-by: Hillf Danton Reviewed-by: Andrea Arcangeli Cc: Hugh Dickins Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index dae27ba..bb28a5f 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2422,6 +2422,8 @@ retry_avoidcopy: * anon_vma prepared. */ if (unlikely(anon_vma_prepare(vma))) { + page_cache_release(new_page); + page_cache_release(old_page); /* Caller expects lock to be held */ spin_lock(&mm->page_table_lock); return VM_FAULT_OOM; -- cgit v0.10.2 From 8889023a4ab5f32325b568e7626fd2233cf64fa5 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 01:43:23 +0100 Subject: unicore32: Fix typo 'PUV3_I2C' Signed-off-by: Paul Bolle Acked-by: Guan Xuetao diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index e57dcce..942ed61 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -237,13 +237,13 @@ menu "PKUnity NetBook-0916 Features" config I2C_BATTERY_BQ27200 tristate "I2C Battery BQ27200 Support" - select PUV3_I2C + select I2C_PUV3 select POWER_SUPPLY select BATTERY_BQ27x00 config I2C_EEPROM_AT24 tristate "I2C EEPROMs AT24 support" - select PUV3_I2C + select I2C_PUV3 select MISC_DEVICES select EEPROM_AT24 -- cgit v0.10.2 From ed96dfbcfea92233d27db9d3c77fc91a58c959bf Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 15 Nov 2011 14:54:51 -0800 Subject: unicore32, exec: remove redundant set_fs(USER_DS) The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause Cc: Guan Xuetao Signed-off-by: Andrew Morton Acked-by: Guan Xuetao diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h index e11cb07..f0d780a 100644 --- a/arch/unicore32/include/asm/processor.h +++ b/arch/unicore32/include/asm/processor.h @@ -53,7 +53,6 @@ struct thread_struct { #define start_thread(regs, pc, sp) \ ({ \ unsigned long *stack = (unsigned long *)sp; \ - set_fs(USER_DS); \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ regs->UCreg_asr = USER_MODE; \ regs->UCreg_pc = pc & ~1; /* pc */ \ -- cgit v0.10.2 From 9c8b39077b0a5b0990bb707fcd7b5913d7b322b8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:56:05 -0500 Subject: powerpc: Fix build breakage in jump_label.c Should do what other architectures do and wrap all that code into the appropriate ifdef Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/jump_label.c b/arch/powerpc/kernel/jump_label.c index 368d158..a1ed8a8 100644 --- a/arch/powerpc/kernel/jump_label.c +++ b/arch/powerpc/kernel/jump_label.c @@ -11,6 +11,7 @@ #include #include +#ifdef HAVE_JUMP_LABEL void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type) { @@ -21,3 +22,4 @@ void arch_jump_label_transform(struct jump_entry *entry, else patch_instruction(addr, PPC_INST_NOP); } +#endif -- cgit v0.10.2 From 4933402075d4f38a82c491a4afca6ca7661aa0a8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:57:05 -0500 Subject: carma-fpga: Missed switch from of_register_platform_driver() ... by 6 months Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c index 7ce6065..eb5cd28 100644 --- a/drivers/misc/carma/carma-fpga-program.c +++ b/drivers/misc/carma/carma-fpga-program.c @@ -945,8 +945,7 @@ static int fpga_of_remove(struct platform_device *op) /* CTL-CPLD Version Register */ #define CTL_CPLD_VERSION 0x2000 -static int fpga_of_probe(struct platform_device *op, - const struct of_device_id *match) +static int fpga_of_probe(struct platform_device *op) { struct device_node *of_node = op->dev.of_node; struct device *this_device; @@ -1107,7 +1106,7 @@ static struct of_device_id fpga_of_match[] = { {}, }; -static struct of_platform_driver fpga_of_driver = { +static struct platform_driver fpga_of_driver = { .probe = fpga_of_probe, .remove = fpga_of_remove, .driver = { @@ -1124,12 +1123,12 @@ static struct of_platform_driver fpga_of_driver = { static int __init fpga_init(void) { led_trigger_register_simple("fpga", &ledtrig_fpga); - return of_register_platform_driver(&fpga_of_driver); + return platform_driver_register(&fpga_of_driver); } static void __exit fpga_exit(void) { - of_unregister_platform_driver(&fpga_of_driver); + platform_driver_unregister(&fpga_of_driver); led_trigger_unregister_simple(ledtrig_fpga); } diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c index 3965821..14e974b2 100644 --- a/drivers/misc/carma/carma-fpga.c +++ b/drivers/misc/carma/carma-fpga.c @@ -1249,8 +1249,7 @@ static bool dma_filter(struct dma_chan *chan, void *data) return true; } -static int data_of_probe(struct platform_device *op, - const struct of_device_id *match) +static int data_of_probe(struct platform_device *op) { struct device_node *of_node = op->dev.of_node; struct device *this_device; @@ -1401,7 +1400,7 @@ static struct of_device_id data_of_match[] = { {}, }; -static struct of_platform_driver data_of_driver = { +static struct platform_driver data_of_driver = { .probe = data_of_probe, .remove = data_of_remove, .driver = { @@ -1417,12 +1416,12 @@ static struct of_platform_driver data_of_driver = { static int __init data_init(void) { - return of_register_platform_driver(&data_of_driver); + return platform_driver_register(&data_of_driver); } static void __exit data_exit(void) { - of_unregister_platform_driver(&data_of_driver); + platform_driver_unregister(&data_of_driver); } MODULE_AUTHOR("Ira W. Snyder "); -- cgit v0.10.2 From 5f861ed40200c5c61b698f8d795349112579bcdb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 19:58:17 -0500 Subject: powerpc/fsl_udc_core: Fix dumb typo Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b2c44e1..d786ba3 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1717,7 +1717,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) static inline enum usb_device_speed portscx_device_speed(u32 reg) { - switch (speed & PORTSCX_PORT_SPEED_MASK) { + switch (reg & PORTSCX_PORT_SPEED_MASK) { case PORTSCX_PORT_SPEED_HIGH: return USB_SPEED_HIGH; case PORTSCX_PORT_SPEED_FULL: -- cgit v0.10.2 From 82640a6b9166c993104e255b414298cbec6ecd45 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 8 Nov 2011 21:10:29 -0500 Subject: powerpc/fsl: MCU_MPC8349EMITX wants I2C built-in, modular won't do... Signed-off-by: Al Viro Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index e458872..3fe6d92 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -347,7 +347,7 @@ config SIMPLE_GPIO config MCU_MPC8349EMITX bool "MPC8349E-mITX MCU driver" - depends on I2C && PPC_83xx + depends on I2C=y && PPC_83xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help -- cgit v0.10.2 From bbc24a25e29136a56cf5015ef23eb2c2e8828023 Mon Sep 17 00:00:00 2001 From: Suzuki Poulose Date: Mon, 14 Nov 2011 16:43:50 +0000 Subject: powerpc/4xx: Fix typos in kexec config dependencies Kexec is not supported on 47x. 47x is a variant of 44x with slightly different MMU and SMP support. There was a typo in the config dependency for kexec. This patch fixes the same. Signed-off-by: Suzuki K. Poulose Signed-off-by: Paul Bolle Cc: Kumar Gala Cc: Josh Boyer Cc: linux ppc dev Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b177caa..951e18f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f7d760a..7cd07b4 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -738,7 +738,7 @@ relocate_new_kernel: mr r5, r31 li r0, 0 -#elif defined(CONFIG_44x) && !defined(CONFIG_47x) +#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x) /* * Code for setting up 1:1 mapping for PPC440x for KEXEC -- cgit v0.10.2 From 6d1e2c6c1a0b800473db4df8595c95745be548ea Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 14 Nov 2011 12:55:47 +0000 Subject: powerpc: panic if we can't instantiate RTAS I had to debug a strange situation where all manner of things were failing. SMT threads, storage and network were all completely broken. The root cause was we couldn't find enough memory to instantiate RTAS - this was a network install so the initrd was huge. Instead of limping along and failing in mysterious ways we should just panic up front if RTAS exists and we can't allocate space for it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index b4fa661..cc58486 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1579,10 +1579,8 @@ static void __init prom_instantiate_rtas(void) return; base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } + if (base == 0) + prom_panic("Could not allocate memory for RTAS\n"); rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); if (!IHANDLE_VALID(rtas_inst)) { -- cgit v0.10.2 From d715e433b7ad19c02fc4becf0d5e9a59f97925de Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 14 Nov 2011 12:54:47 +0000 Subject: powerpc: Copy down exception vectors after feature fixups kdump fails because we try to execute an HV only instruction. Feature fixups are being applied after we copy the exception vectors down to 0 so they miss out on any updates. We have always had this issue but it only became critical in v3.0 when we added CFAR support (breaks POWER5) and v3.1 when we added POWERNV (breaks everyone). Signed-off-by: Anton Blanchard Cc: [v3.0+] Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 6fbce72..a0f358d 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -8,7 +8,7 @@ #ifdef __powerpc64__ -extern char _end[]; +extern char __end_interrupts[]; static inline int in_kernel_text(unsigned long addr) { diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h index d7cab44..87878c6 100644 --- a/arch/powerpc/include/asm/synch.h +++ b/arch/powerpc/include/asm/synch.h @@ -13,6 +13,7 @@ extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; extern void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end); +extern void do_final_fixups(void); static inline void eieio(void) { diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 35f2764..2985338 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -132,7 +132,6 @@ static void kvm_patch_ins_b(u32 *inst, int addr) /* On relocatable kernels interrupts handlers and our code can be in different regions, so we don't patch them */ - extern u32 __end_interrupts; if ((ulong)inst < (ulong)&__end_interrupts) return; #endif diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c1ce863..ac76108 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -107,6 +107,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) PTRRELOC(&__start___lwsync_fixup), PTRRELOC(&__stop___lwsync_fixup)); + do_final_fixups(); + return KERNELBASE + offset; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1a9dea8..fb9bb46 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -359,6 +359,7 @@ void __init setup_system(void) &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); do_lwsync_fixups(cur_cpu_spec->cpu_features, &__start___lwsync_fixup, &__stop___lwsync_fixup); + do_final_fixups(); /* * Unflatten the device-tree passed by prom_init or kexec diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 0d08d01..7a8a748 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include struct fixup_entry { @@ -128,6 +130,27 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end) } } +void do_final_fixups(void) +{ +#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE) + int *src, *dest; + unsigned long length; + + if (PHYSICAL_START == 0) + return; + + src = (int *)(KERNELBASE + PHYSICAL_START); + dest = (int *)KERNELBASE; + length = (__end_interrupts - _stext) / sizeof(int); + + while (length--) { + patch_instruction(dest, *src); + src++; + dest++; + } +#endif +} + #ifdef CONFIG_FTR_FIXUP_SELFTEST #define check(x) \ -- cgit v0.10.2 From 2cd76629f6c40f7b227ba7b3885ce10e6ec0face Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 10 Nov 2011 16:04:17 +0000 Subject: powerpc/trace: Add a dummy stack frame for trace_hardirqs_off The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. If an exception occurs in user mode, there is only one stack frame on the stack and accessing the CALLER_ADDR1 will causes the following call trace. So we create a dummy stack frame to make trace_hardirqs_off happy. WARNING: at kernel/smp.c:459 Modules linked in: NIP: c0093280 LR: c00930a0 CTR: c0010780 REGS: edb87ae0 TRAP: 0700 Not tainted (3.1.0) MSR: 00021002 CR: 28002888 XER: 00000000 TASK = edce2ac0[17658] 'mthread-lock-on' THREAD: edb86000 CPU: 5 GPR00: 00000001 edb87b90 edce2ac0 00000005 c0019594 edb87bd8 00000001 00000fe3 GPR08: 00041000 c084138c 4e20120d edb87b90 48002888 1001aa7c 00000000 00000000 GPR16: 48830000 10012a8c 00000000 10000af4 00000001 c0810000 00000000 00000000 GPR24: ee9aa920 c0816a18 00000000 00000005 c0019594 edb87bd8 ee20178c edb87b90 NIP [c0093280] smp_call_function_many+0x214/0x2b4 LR [c00930a0] smp_call_function_many+0x34/0x2b4 Call Trace: [edb87b90] [c00930a0] smp_call_function_many+0x34/0x2b4 (unreliable) [edb87bd0] [c00194ec] __flush_tlb_page+0xac/0x100 [edb87c00] [c001957c] flush_tlb_page+0x3c/0x54 [edb87c10] [c00180ac] ptep_set_access_flags+0x74/0x12c [edb87c40] [c0128068] handle_pte_fault+0x2f0/0x9ac [edb87cb0] [c0128c3c] handle_mm_fault+0x104/0x1dc [edb87ce0] [c05f40f4] do_page_fault+0x2dc/0x630 [edb87e50] [c001078c] handle_page_fault+0xc/0x80 Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 56212bc..4f80cf1 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -215,7 +215,22 @@ reenable_mmu: /* re-enable mmu so we can */ stw r9,8(r1) stw r11,12(r1) stw r3,ORIG_GPR3(r1) + /* + * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. + * If from user mode there is only one stack frame on the stack, and + * accessing CALLER_ADDR1 will cause oops. So we need create a dummy + * stack frame to make trace_hardirqs_off happy. + */ + andi. r12,r12,MSR_PR + beq 11f + stwu r1,-16(r1) + bl trace_hardirqs_off + addi r1,r1,16 + b 12f + +11: bl trace_hardirqs_off +12: lwz r0,GPR0(r1) lwz r3,ORIG_GPR3(r1) lwz r4,GPR4(r1) -- cgit v0.10.2 From de1d9248eadd27539eba449b4d09428252e80c04 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 9 Nov 2011 20:39:49 +0000 Subject: powerpc: Add hvcall.h include to book3s_hv.c If you build with KVM and UP it fails with the following due to a missing include. /arch/powerpc/kvm/book3s_hv.c: In function 'do_h_register_vpa': arch/powerpc/kvm/book3s_hv.c:156:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:156:10: note: each undeclared identifier is reported only once for each function it appears in arch/powerpc/kvm/book3s_hv.c:192:12: error: 'H_RESOURCE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:222:9: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c: In function 'kvmppc_pseries_do_hcall': arch/powerpc/kvm/book3s_hv.c:228:30: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:232:7: error: 'H_CEDE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:234:7: error: 'H_PROD' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:238:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:250:7: error: 'H_CONFER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:252:7: error: 'H_REGISTER_VPA' undeclared (first use in this function) make[2]: *** [arch/powerpc/kvm/book3s_hv.o] Error 1 Signed-off-by: Michael Neuling cc: stable@kernel.org (3.1 only) Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 0cdbc07..0cb137a 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 72f3bea075287785ed32b777b6dd2636aa7002e8 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 8 Nov 2011 12:37:26 +0000 Subject: powerpc/ps3: Fix lost SMP IPIs Fixes the PS3 bootup hang introduced in 3.0-rc1 by: commit 317f394160e9beb97d19a84c39b7e5eb3d7815a sched: Move the second half of ttwu() to the remote cpu Move the PS3's LV1 EOI call lv1_end_of_interrupt_ext() from ps3_chip_eoi() to ps3_get_irq() for IPI messages. If lv1_send_event_locally() is called between a previous call to lv1_send_event_locally() and the coresponding call to lv1_end_of_interrupt_ext() the second event will not be delivered to the target cpu. The PS3's SMP IPIs are implemented using lv1_send_event_locally(), so if two IPI messages of the same type are sent to the same target in a relatively short period of time the second IPI event can become lost when lv1_end_of_interrupt_ext() is called from ps3_chip_eoi(). CC: stable@kernel.org Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 404bc52..1d6f4f4 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -88,6 +88,7 @@ struct ps3_private { struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN))); u64 ppe_id; u64 thread_id; + unsigned long ipi_mask; }; static DEFINE_PER_CPU(struct ps3_private, ps3_private); @@ -144,7 +145,11 @@ static void ps3_chip_unmask(struct irq_data *d) static void ps3_chip_eoi(struct irq_data *d) { const struct ps3_private *pd = irq_data_get_irq_chip_data(d); - lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq); + + /* non-IPIs are EOIed here. */ + + if (!test_bit(63 - d->irq, &pd->ipi_mask)) + lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq); } /** @@ -691,6 +696,16 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) cpu, virq, pd->bmp.ipi_debug_brk_mask); } +void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq) +{ + struct ps3_private *pd = &per_cpu(ps3_private, cpu); + + set_bit(63 - virq, &pd->ipi_mask); + + DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__, + cpu, virq, pd->ipi_mask); +} + static unsigned int ps3_get_irq(void) { struct ps3_private *pd = &__get_cpu_var(ps3_private); @@ -720,6 +735,12 @@ static unsigned int ps3_get_irq(void) BUG(); } #endif + + /* IPIs are EOIed here. */ + + if (test_bit(63 - plug, &pd->ipi_mask)) + lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug); + return plug; } diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index 9a196a8..1a633ed 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -43,6 +43,7 @@ void ps3_mm_shutdown(void); void ps3_init_IRQ(void); void ps3_shutdown_IRQ(int cpu); void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq); +void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq); /* smp */ diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index 4c44794..f609345 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -94,6 +94,8 @@ static void __init ps3_smp_setup_cpu(int cpu) if (result) virqs[i] = NO_IRQ; + else + ps3_register_ipi_irq(cpu, virqs[i]); } ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); -- cgit v0.10.2 From 7eaf09eefe5b98a530bc5f7b317b9aba1628cf61 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 8 Nov 2011 12:38:21 +0000 Subject: powerpc/ps3: Fix SMP lockdep boot warning Move the PS3 IPI message setup from ps3_smp_setup_cpu() to ps3_smp_probe(). Fixes startup warnings like these: ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2649 Modules linked in: ... ---[ end trace 31fd0ba7d8756001 ]--- Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index f609345..efc1cd8 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -59,48 +59,49 @@ static void ps3_smp_message_pass(int cpu, int msg) static int ps3_smp_probe(void) { - return 2; -} + int cpu; -static void __init ps3_smp_setup_cpu(int cpu) -{ - int result; - unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu); - int i; + for (cpu = 0; cpu < 2; cpu++) { + int result; + unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu); + int i; - DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); + DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); - /* - * Check assumptions on ps3_ipi_virqs[] indexing. If this - * check fails, then a different mapping of PPC_MSG_ - * to index needs to be setup. - */ + /* + * Check assumptions on ps3_ipi_virqs[] indexing. If this + * check fails, then a different mapping of PPC_MSG_ + * to index needs to be setup. + */ - BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0); - BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1); - BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2); - BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); + BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0); + BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1); + BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2); + BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); - for (i = 0; i < MSG_COUNT; i++) { - result = ps3_event_receive_port_setup(cpu, &virqs[i]); + for (i = 0; i < MSG_COUNT; i++) { + result = ps3_event_receive_port_setup(cpu, &virqs[i]); - if (result) - continue; + if (result) + continue; - DBG("%s:%d: (%d, %d) => virq %u\n", - __func__, __LINE__, cpu, i, virqs[i]); + DBG("%s:%d: (%d, %d) => virq %u\n", + __func__, __LINE__, cpu, i, virqs[i]); - result = smp_request_message_ipi(virqs[i], i); + result = smp_request_message_ipi(virqs[i], i); - if (result) - virqs[i] = NO_IRQ; - else - ps3_register_ipi_irq(cpu, virqs[i]); - } + if (result) + virqs[i] = NO_IRQ; + else + ps3_register_ipi_irq(cpu, virqs[i]); + } - ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); + ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); - DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); + DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); + } + + return 2; } void ps3_smp_cleanup_cpu(int cpu) @@ -123,7 +124,6 @@ static struct smp_ops_t ps3_smp_ops = { .probe = ps3_smp_probe, .message_pass = ps3_smp_message_pass, .kick_cpu = smp_generic_kick_cpu, - .setup_cpu = ps3_smp_setup_cpu, }; void smp_init_ps3(void) -- cgit v0.10.2 From 4dcfe1025b513c2c1da5bf5586adb0e80148f612 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 Nov 2011 13:01:10 +0100 Subject: sched: Avoid SMT siblings in select_idle_sibling() if possible Avoid select_idle_sibling() from picking a sibling thread if there's an idle core that shares cache. This fixes SMT balancing in the increasingly common case where there's a shared cache core available to balance to. Tested-by: Mike Galbraith Signed-off-by: Peter Zijlstra Cc: Suresh Siddha Link: http://lkml.kernel.org/r/1321350377.1421.55.camel@twins Signed-off-by: Ingo Molnar diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 7e51b5b..ba0e1f4 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2326,7 +2326,8 @@ static int select_idle_sibling(struct task_struct *p, int target) int cpu = smp_processor_id(); int prev_cpu = task_cpu(p); struct sched_domain *sd; - int i; + struct sched_group *sg; + int i, smt = 0; /* * If the task is going to be woken-up on this cpu and if it is @@ -2346,25 +2347,38 @@ static int select_idle_sibling(struct task_struct *p, int target) * Otherwise, iterate the domains and find an elegible idle cpu. */ rcu_read_lock(); +again: for_each_domain(target, sd) { - if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) - break; + if (!smt && (sd->flags & SD_SHARE_CPUPOWER)) + continue; - for_each_cpu_and(i, sched_domain_span(sd), tsk_cpus_allowed(p)) { - if (idle_cpu(i)) { - target = i; - break; + if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) { + if (!smt) { + smt = 1; + goto again; } + break; } - /* - * Lets stop looking for an idle sibling when we reached - * the domain that spans the current cpu and prev_cpu. - */ - if (cpumask_test_cpu(cpu, sched_domain_span(sd)) && - cpumask_test_cpu(prev_cpu, sched_domain_span(sd))) - break; + sg = sd->groups; + do { + if (!cpumask_intersects(sched_group_cpus(sg), + tsk_cpus_allowed(p))) + goto next; + + for_each_cpu(i, sched_group_cpus(sg)) { + if (!idle_cpu(i)) + goto next; + } + + target = cpumask_first_and(sched_group_cpus(sg), + tsk_cpus_allowed(p)); + goto done; +next: + sg = sg->next; + } while (sg != sd->groups); } +done: rcu_read_unlock(); return target; -- cgit v0.10.2 From fccfdc6f0d8c83c854eeb6d93aa158f0e551bd49 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Mon, 7 Nov 2011 20:26:34 -0800 Subject: sched: Fix buglet in return_cfs_rq_runtime() In return_cfs_rq_runtime() we want to return bandwidth when there are no remaining tasks, not "return" when this is the case. Signed-off-by: Paul Turner Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111108042736.623812423@google.com Signed-off-by: Ingo Molnar diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ba0e1f4..a78ed27 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1756,7 +1756,7 @@ static void __return_cfs_rq_runtime(struct cfs_rq *cfs_rq) static __always_inline void return_cfs_rq_runtime(struct cfs_rq *cfs_rq) { - if (!cfs_rq->runtime_enabled || !cfs_rq->nr_running) + if (!cfs_rq->runtime_enabled || cfs_rq->nr_running) return; __return_cfs_rq_runtime(cfs_rq); -- cgit v0.10.2 From 3bb9068278ea524581237abadd41377a14717e7d Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 16 Nov 2011 09:21:48 +0100 Subject: loop: prevent information leak after failed read If read was not fully successful we have to fail whole bio to prevent information leak of old pages ##Testcase_begin dd if=/dev/zero of=./file bs=1M count=1 losetup /dev/loop0 ./file -o 4096 truncate -s 0 ./file # OOps loop offset is now beyond i_size, so read will silently fail. # So bio's pages would not be cleared, may which result in information leak. hexdump -C /dev/loop0 ##testcase_end Signed-off-by: Dmitry Monakhov Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3d80682..0d56739 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -372,7 +372,8 @@ do_lo_receive(struct loop_device *lo, if (retval < 0) return retval; - + if (retval != bvec->bv_len) + return -EIO; return 0; } -- cgit v0.10.2 From 0c614e2d3e6ee6ff13c6181f380787cea1d82d1d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 16 Nov 2011 09:21:48 +0100 Subject: include/linux/bio.h: use a static inline function for bio_integrity_clone() When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings: drivers/md/dm.c: In function 'split_bvec': drivers/md/dm.c:1061:3: warning: statement with no effect drivers/md/dm.c: In function 'clone_bio': drivers/md/dm.c:1088:3: warning: statement with no effect Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/include/linux/bio.h b/include/linux/bio.h index a3c071c..d2a3cc2 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -519,7 +519,11 @@ extern void bio_integrity_init(void); #define bioset_integrity_create(a, b) (0) #define bio_integrity_prep(a) (0) #define bio_integrity_enabled(a) (0) -#define bio_integrity_clone(a, b, c, d) (0) +static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src, + gfp_t gfp_mask, struct bio_set *bs) +{ + return 0; +} #define bioset_integrity_free(a) do { } while (0) #define bio_integrity_free(a, b) do { } while (0) #define bio_integrity_endio(a, b) do { } while (0) -- cgit v0.10.2 From 7035b5df3c071ccaf2f1694b96bd8958b0eb37ca Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 16 Nov 2011 09:21:49 +0100 Subject: loop: cleanup set_status interface 1) Anyone who has read access to loopdev has permission to call set_status and may change important parameters such as lo_offset, lo_sizelimit and so on, which contradicts to read access pattern and definitely equals to write access pattern. 2) Add lo_offset over i_size check to prevent blkdev_size overflow. ##Testcase_bagin #dd if=/dev/zero of=./file bs=1k count=1 #losetup /dev/loop0 ./file /* userspace_application */ struct loop_info64 loinf; fd = open("/dev/loop0", O_RDONLY); ioctl(fd, LOOP_GET_STATUS64, &loinf); /* Set offset to any value which is bigger than i_size, and sizelimit * to nonzero value*/ loinf.lo_offset = 4096*1024; loinf.lo_sizelimit = 1024; ioctl(fd, LOOP_SET_STATUS64, &loinf); /* After this loop device will have size similar to 0x7fffffffffxxxx */ #blockdev --getsz /dev/loop0 ##OUTPUT: 36028797018955968 ##Testcase_end [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dmitry Monakhov Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 0d56739..68b205a 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -161,17 +161,19 @@ static struct loop_func_table *xfer_funcs[MAX_LO_CRYPT] = { &xor_funcs }; -static loff_t get_loop_size(struct loop_device *lo, struct file *file) +static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file) { - loff_t size, offset, loopsize; + loff_t size, loopsize; /* Compute loopsize in bytes */ size = i_size_read(file->f_mapping->host); - offset = lo->lo_offset; loopsize = size - offset; - if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize) - loopsize = lo->lo_sizelimit; + /* offset is beyond i_size, wierd but possible */ + if (loopsize < 0) + return 0; + if (sizelimit > 0 && sizelimit < loopsize) + loopsize = sizelimit; /* * Unfortunately, if we want to do I/O on the device, * the number of 512-byte sectors has to fit into a sector_t. @@ -179,17 +181,25 @@ static loff_t get_loop_size(struct loop_device *lo, struct file *file) return loopsize >> 9; } +static loff_t get_loop_size(struct loop_device *lo, struct file *file) +{ + return get_size(lo->lo_offset, lo->lo_sizelimit, file); +} + static int -figure_loop_size(struct loop_device *lo) +figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit) { - loff_t size = get_loop_size(lo, lo->lo_backing_file); + loff_t size = get_size(offset, sizelimit, lo->lo_backing_file); sector_t x = (sector_t)size; if (unlikely((loff_t)x != size)) return -EFBIG; - + if (lo->lo_offset != offset) + lo->lo_offset = offset; + if (lo->lo_sizelimit != sizelimit) + lo->lo_sizelimit = sizelimit; set_capacity(lo->lo_disk, x); - return 0; + return 0; } static inline int @@ -1059,9 +1069,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) if (lo->lo_offset != info->lo_offset || lo->lo_sizelimit != info->lo_sizelimit) { - lo->lo_offset = info->lo_offset; - lo->lo_sizelimit = info->lo_sizelimit; - if (figure_loop_size(lo)) + if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit)) return -EFBIG; } loop_config_discard(lo); @@ -1247,7 +1255,7 @@ static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev) err = -ENXIO; if (unlikely(lo->lo_state != Lo_bound)) goto out; - err = figure_loop_size(lo); + err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit); if (unlikely(err)) goto out; sec = get_capacity(lo->lo_disk); @@ -1285,13 +1293,19 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode, goto out_unlocked; break; case LOOP_SET_STATUS: - err = loop_set_status_old(lo, (struct loop_info __user *) arg); + err = -EPERM; + if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) + err = loop_set_status_old(lo, + (struct loop_info __user *)arg); break; case LOOP_GET_STATUS: err = loop_get_status_old(lo, (struct loop_info __user *) arg); break; case LOOP_SET_STATUS64: - err = loop_set_status64(lo, (struct loop_info64 __user *) arg); + err = -EPERM; + if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) + err = loop_set_status64(lo, + (struct loop_info64 __user *) arg); break; case LOOP_GET_STATUS64: err = loop_get_status64(lo, (struct loop_info64 __user *) arg); -- cgit v0.10.2 From 0007a4c90a11a5371c8b3f80b220fa402a399189 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 16 Nov 2011 09:21:49 +0100 Subject: cciss: auto engage SCSI mid layer at driver load time A long time ago, probably in 2002, one of the distros, or maybe more than one, loaded block drivers prior to loading the SCSI mid layer. This meant that the cciss driver, being a block driver, could not engage the SCSI mid layer at init time without panicking, and relied on being poked by a userland program after the system was up (and the SCSI mid layer was therefore present) to engage the SCSI mid layer. This is no longer the case, and cciss can safely rely on the SCSI mid layer being present at init time and engage the SCSI mid layer straight away. This means that users will see their tape drives and medium changers at driver load time without need for a script in /etc/rc.d that does this: for x in /proc/driver/cciss/cciss* do echo "engage scsi" > $x done However, if no tape drives or medium changers are detected, the SCSI mid layer will not be engaged. If a tape drive or medium change is later hot-added to the system it will then be necessary to use the above script or similar for the device(s) to be acceesible. Signed-off-by: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt index 71464e0..b79d0a1 100644 --- a/Documentation/blockdev/cciss.txt +++ b/Documentation/blockdev/cciss.txt @@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and "SCSI support" in your kernel configuration to be able to use SCSI tape drives with your Smart Array 5xxx controller. -Additionally, note that the driver will not engage the SCSI core at init -time. The driver must be directed to dynamically engage the SCSI core via -the /proc filesystem entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distribution). +Additionally, note that the driver will engage the SCSI core at init +time if any tape drives or medium changers are detected. The driver may +also be directed to dynamically engage the SCSI core via the /proc filesystem +entry which the "block" side of the driver creates as +/proc/driver/cciss/cciss* at runtime. This is best done via a script. + For example: for x in /proc/driver/cciss/cciss[0-9]* diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5b69019..8004ac3 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -5163,6 +5163,7 @@ reinit_after_soft_reset: h->cciss_max_sectors = 8192; rebuild_lun_table(h, 1, 0); + cciss_engage_scsi(h); h->busy_initializing = 0; return 1; diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 951a4e3..e820b68 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1720,5 +1720,6 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) /* If no tape support, then these become defined out of existence */ #define cciss_scsi_setup(cntl_num) +#define cciss_engage_scsi(h) #endif /* CONFIG_CISS_SCSI_TAPE */ -- cgit v0.10.2 From 3540d5e89b2ac268fcfc9b07a50a9ba4acc2e5e5 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: block: avoid unnecessary plug list flush get_request_wait() could sleep and flush the plug list. If the list is already flushed, don't flush again. Signed-off-by: Shaohua Li Reviewed-by: Namhyung Kim Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index f43c8a5..6403c12 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1379,15 +1379,17 @@ get_rq: */ if (list_empty(&plug->list)) trace_block_plug(q); - else if (!plug->should_sort) { - struct request *__rq; + else { + if (!plug->should_sort) { + struct request *__rq; - __rq = list_entry_rq(plug->list.prev); - if (__rq->q != q) - plug->should_sort = 1; + __rq = list_entry_rq(plug->list.prev); + if (__rq->q != q) + plug->should_sort = 1; + } + if (request_count >= BLK_MAX_REQUEST_COUNT) + blk_flush_plug_list(plug, false); } - if (request_count >= BLK_MAX_REQUEST_COUNT) - blk_flush_plug_list(plug, false); list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); } else { -- cgit v0.10.2 From 121f099412bd6576dfb3d94222e89d9341362177 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: bio: change some signed vars to unsigned This is just a cleanup patch to silence a static checker warning. The problem is that we cap "nr_iovecs" so it can't be larger than "UIO_MAXIOV" but we don't check for negative values. It turns out this is prevented at other layers, but logically it doesn't make sense to have negative nr_iovecs so making it unsigned is nicer. Signed-off-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 41c93c7..b1fe82c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -337,7 +337,7 @@ static void bio_fs_destructor(struct bio *bio) * RETURNS: * Pointer to new bio on success, NULL on failure. */ -struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) +struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); @@ -365,7 +365,7 @@ static void bio_kmalloc_destructor(struct bio *bio) * %__GFP_WAIT, the allocation is guaranteed to succeed. * **/ -struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) +struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs) { struct bio *bio; @@ -696,7 +696,8 @@ static void bio_free_map_data(struct bio_map_data *bmd) kfree(bmd); } -static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count, +static struct bio_map_data *bio_alloc_map_data(int nr_segs, + unsigned int iov_count, gfp_t gfp_mask) { struct bio_map_data *bmd; diff --git a/include/linux/bio.h b/include/linux/bio.h index d2a3cc2..847994a 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -211,8 +211,8 @@ extern void bio_pair_release(struct bio_pair *dbio); extern struct bio_set *bioset_create(unsigned int, unsigned int); extern void bioset_free(struct bio_set *); -extern struct bio *bio_alloc(gfp_t, int); -extern struct bio *bio_kmalloc(gfp_t, int); +extern struct bio *bio_alloc(gfp_t, unsigned int); +extern struct bio *bio_kmalloc(gfp_t, unsigned int); extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *); extern void bio_put(struct bio *); extern void bio_free(struct bio *, struct bio_set *); -- cgit v0.10.2 From a2c2a0e668e26e020731ce2a40e6474d1d37210a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: paride: fix potential information leak in pg_read() Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. i In this case, the pg_write_hdr struct has a hole in it. struct pg_write_hdr { char magic; /* 0 1 */ char func; /* 1 1 */ /* XXX 2 bytes hole, try to pack */ int dlen; /* 4 4 */ Signed-off-by: Dan Carpenter Cc: Tim Waugh Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 6b9a200..a79fb4f 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -630,6 +630,7 @@ static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t if (dev->status & 0x10) return -ETIME; + memset(&hdr, 0, sizeof(hdr)); hdr.magic = PG_MAGIC; hdr.dlen = dev->dlen; copy = 0; -- cgit v0.10.2 From 019ceb7d5d252ce71001a157cf29f4ac28501b72 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 16 Nov 2011 09:21:50 +0100 Subject: block: add missed trace_block_plug After flush plug list, the list has no request, so we need to add a trace_block_plug(). Signed-off-by: Shaohua Li Reviewed-by: Namhyung Kim Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 6403c12..ea70e6c 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1387,8 +1387,10 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } - if (request_count >= BLK_MAX_REQUEST_COUNT) + if (request_count >= BLK_MAX_REQUEST_COUNT) { blk_flush_plug_list(plug, false); + trace_block_plug(q); + } } list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); -- cgit v0.10.2 From b95d68b8179764e29558b75cec35ef4a6a98925b Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:46 +0800 Subject: ALSA: hda - fix ELD memory leak memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: Cc: Pierre-louis Bossart Acked-by: Stephen Warren Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 1c8ddf5..a065d6d 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -297,10 +297,10 @@ static int hdmi_update_eld(struct hdmi_eld *e, buf + ELD_FIXED_BYTES + mnl + 3 * i); } + e->eld_valid = true; return 0; out_fail: - e->eld_ver = 0; return -EINVAL; } @@ -323,9 +323,6 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld, * ELD is valid, actual eld_size is assigned in hdmi_update_eld() */ - if (!eld->eld_valid) - return -ENOENT; - size = snd_hdmi_get_eld_size(codec, nid); if (size == 0) { /* wfg: workaround for ASUS P5E-VM HDMI board */ diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 6579e0f..618ddad 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -653,6 +653,9 @@ struct hdmi_eld { int spk_alloc; int sad_count; struct cea_sad sad[ELD_MAX_SAD]; + /* + * all fields above eld_buffer will be cleared before updating ELD + */ char eld_buffer[ELD_MAX_SIZE]; #ifdef CONFIG_PROC_FS struct snd_info_entry *proc_entry; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 81b7b79..aebfee5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -980,20 +980,19 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, * the unsolicited response to avoid custom WARs. */ int present = snd_hda_pin_sense(codec, pin_nid); + bool eld_valid = false; - memset(eld, 0, sizeof(*eld)); + memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer)); eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); if (eld->monitor_present) - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); - else - eld->eld_valid = 0; + eld_valid = !!(present & AC_PINSENSE_ELDV); printk(KERN_INFO "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, eld->monitor_present, eld->eld_valid); + codec->addr, pin_nid, eld->monitor_present, eld_valid); - if (eld->eld_valid) + if (eld_valid) if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); -- cgit v0.10.2 From 744626dada90cb1231a65b08874aa7a9f11c2ea8 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:47 +0800 Subject: ALSA: hda - delayed ELD repoll The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index aebfee5..a76139b 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -65,7 +65,10 @@ struct hdmi_spec_per_pin { hda_nid_t pin_nid; int num_mux_nids; hda_nid_t mux_nids[HDA_MAX_CONNECTIONS]; + + struct hda_codec *codec; struct hdmi_eld sink_eld; + struct delayed_work work; }; struct hdmi_spec { @@ -745,8 +748,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx, * Unsolicited events */ -static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, - struct hdmi_eld *eld); +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry); static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) { @@ -766,7 +768,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) return; eld = &spec->pins[pin_idx].sink_eld; - hdmi_present_sense(codec, pin_nid, eld); + hdmi_present_sense(&spec->pins[pin_idx], true); /* * HDMI sink's ELD info cannot always be retrieved for now, e.g. @@ -968,9 +970,11 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) return 0; } -static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, - struct hdmi_eld *eld) +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) { + struct hda_codec *codec = per_pin->codec; + struct hdmi_eld *eld = &per_pin->sink_eld; + hda_nid_t pin_nid = per_pin->pin_nid; /* * Always execute a GetPinSense verb here, even when called from * hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited @@ -992,13 +996,27 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", codec->addr, pin_nid, eld->monitor_present, eld_valid); - if (eld_valid) + if (eld_valid) { if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); + else if (retry) { + queue_delayed_work(codec->bus->workq, + &per_pin->work, + msecs_to_jiffies(300)); + } + } snd_hda_input_jack_report(codec, pin_nid); } +static void hdmi_repoll_eld(struct work_struct *work) +{ + struct hdmi_spec_per_pin *per_pin = + container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); + + hdmi_present_sense(per_pin, false); +} + static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) { struct hdmi_spec *spec = codec->spec; @@ -1227,7 +1245,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx) if (err < 0) return err; - hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld); + hdmi_present_sense(per_pin, false); return 0; } @@ -1278,6 +1296,8 @@ static int generic_hdmi_init(struct hda_codec *codec) AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | pin_nid); + per_pin->codec = codec; + INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld); snd_hda_eld_proc_new(codec, eld, pin_idx); } return 0; @@ -1292,10 +1312,12 @@ static void generic_hdmi_free(struct hda_codec *codec) struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx]; struct hdmi_eld *eld = &per_pin->sink_eld; + cancel_delayed_work(&per_pin->work); snd_hda_eld_proc_free(codec, eld); } snd_hda_input_jack_free(codec); + flush_workqueue(codec->bus->workq); kfree(spec); } -- cgit v0.10.2 From 2d1b439bdb3cee0ae5ccbd7f65e1e5852b1c2718 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Nov 2011 16:29:48 +0800 Subject: ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld() It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index a065d6d..7ae7578 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -297,6 +297,14 @@ static int hdmi_update_eld(struct hdmi_eld *e, buf + ELD_FIXED_BYTES + mnl + 3 * i); } + /* + * HDMI sink's ELD info cannot always be retrieved for now, e.g. + * in console or for audio devices. Assume the highest speakers + * configuration, to _not_ prohibit multi-channel audio playback. + */ + if (!e->spk_alloc) + e->spk_alloc = 0xffff; + e->eld_valid = true; return 0; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index a76139b..9850c5b 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -757,7 +757,6 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) int pd = !!(res & AC_UNSOL_RES_PD); int eldv = !!(res & AC_UNSOL_RES_ELDV); int pin_idx; - struct hdmi_eld *eld; printk(KERN_INFO "HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", @@ -766,17 +765,8 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) pin_idx = pin_nid_to_pin_index(spec, pin_nid); if (pin_idx < 0) return; - eld = &spec->pins[pin_idx].sink_eld; hdmi_present_sense(&spec->pins[pin_idx], true); - - /* - * HDMI sink's ELD info cannot always be retrieved for now, e.g. - * in console or for audio devices. Assume the highest speakers - * configuration, to _not_ prohibit multi-channel audio playback. - */ - if (!eld->spk_alloc) - eld->spk_alloc = 0xffff; } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) -- cgit v0.10.2 From 25d7d59d1f7321be85bda175c9a1bb85ca1b5881 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:52:01 +0100 Subject: ALSA: hda - Update URLs in document Some stuff was moved from kernel.org to other places. Signed-off-by: Takashi Iwai diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 03e2771..91fee3b 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -579,7 +579,7 @@ Development Tree ~~~~~~~~~~~~~~~~ The latest development codes for HD-audio are found on sound git tree: -- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git The master branch or for-next branches can be used as the main development branches in general while the HD-audio specific patches @@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make install(-modules). See INSTALL in the package. The snapshot tarballs are found at: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ +- ftp://ftp.suse.com/pub/people/tiwai/snapshot/ Sending a Bug Report @@ -696,7 +696,7 @@ via hda-verb won't change the mixer value. The hda-verb program is found in the ftp directory: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ +- ftp://ftp.suse.com/pub/people/tiwai/misc/ Also a git repository is available: @@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc. The package is found in: -- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ +- ftp://ftp.suse.com/pub/people/tiwai/misc/ A git repository is available: -- cgit v0.10.2 From ec84d529b689f4ae31813cf74673f3271c36c83a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 16:12:52 +0000 Subject: ARM: PMU: re-export release_pmu symbol to modules Commit b0e89590 ("ARM: PMU: move CPU PMU platform device handling and init into perf") inadvertently removed the EXPORT_SYMBOL_GPL on release_pmu, so out-of-tree modules can no longer play nice with perf, even if they tried in the first place. This patch re-exports the symbol. Reported-by: Jon Medhurst (Tixy) Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c3407e..2334bf8 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type) { clear_bit_unlock(type, pmu_lock); } +EXPORT_SYMBOL_GPL(release_pmu); -- cgit v0.10.2 From 14e25c5eeb90d4f61cc94933307d04a19738ad2f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 16 Nov 2011 10:05:18 +0000 Subject: ARM: PMU: remove pmu_init declaration pmu_init no longer exists, so don't declare it in asm/pmu.h. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 71d99b8..0bda22c 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type); extern void release_pmu(enum arm_pmu_type type); -/** - * init_pmu() - Initialise the PMU. - * - * Initialise the system ready for PMU enabling. This should typically set the - * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do - * the actual hardware initialisation. - */ -extern int -init_pmu(enum arm_pmu_type type); - #else /* CONFIG_CPU_HAS_PMU */ #include -- cgit v0.10.2 From bf14fc54d6386ccd1ef3f1b0ff69e7a765cf8ded Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 6 Jun 2011 12:35:46 +0100 Subject: ARM: highbank: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Acked-by: Rob Herring Signed-off-by: Will Deacon diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b82dcf0..88660d5 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -72,6 +73,9 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), -- cgit v0.10.2 From eaa142ca3dee1478aca1a645bb0e5a249a33241a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 9 Aug 2011 12:24:07 +0100 Subject: ARM: mach-imx: convert logical CPU numbers to physical numbers This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Cc: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Will Deacon diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 36cacbd..a8e3368 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #define SRC_SCR 0x000 @@ -23,10 +24,15 @@ static void __iomem *src_base; +#ifndef CONFIG_SMP +#define cpu_logical_map(cpu) 0 +#endif + void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; + cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; @@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { + cpu = cpu_logical_map(cpu); writel_relaxed(BSYM(virt_to_phys(jump_addr)), src_base + SRC_GPR1 + cpu * 8); } -- cgit v0.10.2 From 499d05ecf990a7a7bbf9e0a273f9969f8ec69efc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 16 Nov 2011 19:34:48 +0800 Subject: mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Reviewed-by: Neil Brown Reviewed-by: KOSAKI Motohiro Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index a3278f0..79c3441 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1133,7 +1133,7 @@ pause: pages_dirtied, pause, start_time); - __set_current_state(TASK_UNINTERRUPTIBLE); + __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); dirty_thresh = hard_dirty_limit(dirty_thresh); @@ -1145,6 +1145,9 @@ pause: */ if (nr_dirty < dirty_thresh) break; + + if (fatal_signal_pending(current)) + break; } if (!dirty_exceeded && bdi->dirty_exceeded) -- cgit v0.10.2 From 12b248eba4fd189216cad14b7dd1cfdacdf90cdf Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:13:34 +0900 Subject: ARM: S5P: Fix export.h inclusion Commit 32aaeffbd4a7 ("Merge branch 'modsplit-Oct31 2011'...") breaks build like following and this fixes it to add inclusion . arch/arm/plat-s5p/sysmmu.c:302: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index e1cbc72..c8bec9c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -11,6 +11,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From a69e4c28b2bddc21b5752b1da8f43ab0a817305c Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 17 Nov 2011 01:14:38 +0900 Subject: ARM: SAMSUNG: inclusion export.h instead of module.h Only for THIS_MODULE, the file should be added instead of . Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 6666856..f208154 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c index a927666..c7adad0 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c +++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c @@ -12,7 +12,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c index efe1d56..312b510 100644 --- a/arch/arm/plat-samsung/pd.c +++ b/arch/arm/plat-samsung/pd.c @@ -11,7 +11,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index dc1185d..c559d84 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -11,7 +11,7 @@ * the Free Software Foundation; either version 2 of the License. */ -#include +#include #include #include #include -- cgit v0.10.2 From dc2c83582eac2682808b80e9dce7d2cac2b20596 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 17 Nov 2011 01:17:18 +0900 Subject: ARM: SAMSUNG: include linux/types.h at gpio-cfg.h Include linux/types.h to fix below build error: CC drivers/power/max8903_charger.o In file included from arch/arm/plat-samsung/include/plat/gpio-fns.h:27, from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:1, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/axel/repos/git/linux-2.6/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:30, from drivers/power/max8903_charger.c:23: arch/arm/plat-samsung/include/plat/gpio-cfg.h:27: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_drvstr_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:55: error: expected specifier-qualifier-list before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:146: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:154: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's3c_gpio_getpull' arch/arm/plat-samsung/include/plat/gpio-cfg.h:173: error: expected declaration specifiers or '...' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function 's3c_gpio_cfgrange_nopull': arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: '__force' undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: (Each undeclared identifier is reported only once arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: for each function it appears in.) arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before 'samsung_gpio_pull_t' arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: expected ')' before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:178: error: too many arguments to function 's3c_gpio_cfgall_range' arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:197: error: expected '=', ',', ';', 'asm' or '__attribute__' before 's5p_gpio_get_drvstr' arch/arm/plat-samsung/include/plat/gpio-cfg.h:208: error: expected declaration specifiers or '...' before 's5p_gpio_drvstr_t' make[2]: *** [drivers/power/max8903_charger.o] Error 1 make[1]: *** [drivers/power] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Cc: stable@kernel.org Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index d48245b..df8155b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,6 +24,8 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ +#include + typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; -- cgit v0.10.2 From 05ee7964a470d29889ac48cc8274c1b5a1904a11 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 18:05:11 +0100 Subject: ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 2a2d864..2fbab8e 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -237,6 +237,15 @@ static int cs_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); } +static void cs_update_input_select(struct hda_codec *codec) +{ + struct cs_spec *spec = codec->spec; + if (spec->cur_adc) + snd_hda_codec_write(codec, spec->cur_adc, 0, + AC_VERB_SET_CONNECT_SEL, + spec->adc_idx[spec->cur_input]); +} + /* * Analog capture */ @@ -250,6 +259,7 @@ static int cs_capture_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_adc = spec->adc_nid[spec->cur_input]; spec->cur_adc_stream_tag = stream_tag; spec->cur_adc_format = format; + cs_update_input_select(codec); snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format); return 0; } @@ -689,10 +699,8 @@ static int change_cur_input(struct hda_codec *codec, unsigned int idx, spec->cur_adc_stream_tag, 0, spec->cur_adc_format); } - snd_hda_codec_write(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[idx]); spec->cur_input = idx; + cs_update_input_select(codec); return 1; } @@ -973,10 +981,7 @@ static void cs_automic(struct hda_codec *codec) } else { spec->cur_input = spec->last_input; } - - snd_hda_codec_write_cache(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[spec->cur_input]); + cs_update_input_select(codec); } else { if (present) change_cur_input(codec, spec->automic_idx, 0); @@ -1073,9 +1078,7 @@ static void init_input(struct hda_codec *codec) cs_automic(codec); else { spec->cur_adc = spec->adc_nid[spec->cur_input]; - snd_hda_codec_write(codec, spec->cur_adc, 0, - AC_VERB_SET_CONNECT_SEL, - spec->adc_idx[spec->cur_input]); + cs_update_input_select(codec); } } else { change_cur_input(codec, spec->cur_input, 1); -- cgit v0.10.2 From cd12909cb576d37311fe35868780e82d5007d0c8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 29 Sep 2011 16:53:32 +0100 Subject: xen: map foreign pages for shared rings by updating the PTEs directly When mapping a foreign page with xenbus_map_ring_valloc() with the GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and pass a pointer to the PTE (in init_mm). After the page is mapped, the usual fault mechanism can be used to update additional MMs. This allows the vmalloc_sync_all() to be removed from alloc_vm_area(). Signed-off-by: David Vrabel Acked-by: Andrew Morton [v1: Squashed fix by Michal for no-mmu case] Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Michal Simek diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c index 6bbfd7a..5a40d24 100644 --- a/arch/x86/xen/grant-table.c +++ b/arch/x86/xen/grant-table.c @@ -71,7 +71,7 @@ int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, if (shared == NULL) { struct vm_struct *area = - alloc_vm_area(PAGE_SIZE * max_nr_gframes); + alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL); BUG_ON(area == NULL); shared = area->addr; *__shared = shared; diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 81c3ce6..1906125 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -436,19 +437,20 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn); int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr) { struct gnttab_map_grant_ref op = { - .flags = GNTMAP_host_map, + .flags = GNTMAP_host_map | GNTMAP_contains_pte, .ref = gnt_ref, .dom = dev->otherend_id, }; struct vm_struct *area; + pte_t *pte; *vaddr = NULL; - area = alloc_vm_area(PAGE_SIZE); + area = alloc_vm_area(PAGE_SIZE, &pte); if (!area) return -ENOMEM; - op.host_addr = (unsigned long)area->addr; + op.host_addr = arbitrary_virt_to_machine(pte).maddr; if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1)) BUG(); @@ -527,6 +529,7 @@ int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr) struct gnttab_unmap_grant_ref op = { .host_addr = (unsigned long)vaddr, }; + unsigned int level; /* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr) * method so that we don't have to muck with vmalloc internals here. @@ -548,6 +551,8 @@ int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr) } op.handle = (grant_handle_t)area->phys_addr; + op.host_addr = arbitrary_virt_to_machine( + lookup_address((unsigned long)vaddr, &level)).maddr; if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1)) BUG(); diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 687fb11..4bde182 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -119,7 +119,7 @@ unmap_kernel_range(unsigned long addr, unsigned long size) #endif /* Allocate/destroy a 'vmalloc' VM area. */ -extern struct vm_struct *alloc_vm_area(size_t size); +extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes); extern void free_vm_area(struct vm_struct *area); /* for /dev/kmem */ diff --git a/mm/nommu.c b/mm/nommu.c index 73419c5..b982290 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -454,7 +454,7 @@ void __attribute__((weak)) vmalloc_sync_all(void) * between processes, it syncs the pagetable across all * processes. */ -struct vm_struct *alloc_vm_area(size_t size) +struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes) { BUG(); return NULL; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index b669aa6..3231bf3 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -2141,23 +2141,30 @@ void __attribute__((weak)) vmalloc_sync_all(void) static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data) { - /* apply_to_page_range() does all the hard work. */ + pte_t ***p = data; + + if (p) { + *(*p) = pte; + (*p)++; + } return 0; } /** * alloc_vm_area - allocate a range of kernel address space * @size: size of the area + * @ptes: returns the PTEs for the address space * * Returns: NULL on failure, vm_struct on success * * This function reserves a range of kernel address space, and * allocates pagetables to map that range. No actual mappings - * are created. If the kernel address space is not shared - * between processes, it syncs the pagetable across all - * processes. + * are created. + * + * If @ptes is non-NULL, pointers to the PTEs (in init_mm) + * allocated for the VM area are returned. */ -struct vm_struct *alloc_vm_area(size_t size) +struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes) { struct vm_struct *area; @@ -2171,19 +2178,11 @@ struct vm_struct *alloc_vm_area(size_t size) * of kernel virtual address space and mapped into init_mm. */ if (apply_to_page_range(&init_mm, (unsigned long)area->addr, - area->size, f, NULL)) { + size, f, ptes ? &ptes : NULL)) { free_vm_area(area); return NULL; } - /* - * If the allocated address space is passed to a hypercall - * before being used then we cannot rely on a page fault to - * trigger an update of the page tables. So sync all the page - * tables here. - */ - vmalloc_sync_all(); - return area; } EXPORT_SYMBOL_GPL(alloc_vm_area); -- cgit v0.10.2 From 5f76d7078ce784916d55fc4e1bb0a42985f085a6 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 19 Oct 2011 18:05:27 -0400 Subject: xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI In 5fbdc10395cd500d6ff844825a918c4e6f38de37 the XEN_PLATFORM_PCI config option was removed, but references in header files remained. Clean up those references. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h index a785a3b..438c256 100644 --- a/include/xen/platform_pci.h +++ b/include/xen/platform_pci.h @@ -29,8 +29,7 @@ static inline int xen_must_unplug_nics(void) { #if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \ defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \ - (defined(CONFIG_XEN_PLATFORM_PCI) || \ - defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + defined(CONFIG_XEN_PVHVM) return 1; #else return 0; @@ -40,8 +39,7 @@ static inline int xen_must_unplug_nics(void) { static inline int xen_must_unplug_disks(void) { #if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \ defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \ - (defined(CONFIG_XEN_PLATFORM_PCI) || \ - defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + defined(CONFIG_XEN_PVHVM) return 1; #else return 0; -- cgit v0.10.2 From 72e9cf2ab12ef3e050577ffebdb0c88a28df821d Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 19 Oct 2011 17:59:37 -0400 Subject: xen/balloon: Avoid OOM when requesting highmem If highmem pages are requested from the balloon on a system without highmem, the implementation of alloc_xenballooned_pages will allocate all available memory trying to find highmem pages to return. Allow low memory to be returned when highmem pages are requested to avoid this loop. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a767884..31ab82f 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -501,7 +501,7 @@ EXPORT_SYMBOL_GPL(balloon_set_new_target); * alloc_xenballooned_pages - get pages that have been ballooned out * @nr_pages: Number of pages to get * @pages: pages returned - * @highmem: highmem or lowmem pages + * @highmem: allow highmem pages * @return 0 on success, error otherwise */ int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem) @@ -511,7 +511,7 @@ int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem) mutex_lock(&balloon_mutex); while (pgno < nr_pages) { page = balloon_retrieve(highmem); - if (page && PageHighMem(page) == highmem) { + if (page && (highmem || !PageHighMem(page))) { pages[pgno++] = page; } else { enum bp_state st; -- cgit v0.10.2 From 90d4f5534d14815bd94c10e8ceccc57287657ecc Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Thu, 27 Oct 2011 22:28:59 -0700 Subject: xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs. PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled need VCPU placement to work, or else it will softlockup. CC: stable@kernel.org Acked-by: Stefano Stabellini Signed-off-by: Zhenzhong Duan Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index da8afd5..1f92865 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1356,7 +1356,7 @@ static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self, int cpu = (long)hcpu; switch (action) { case CPU_UP_PREPARE: - per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; + xen_vcpu_setup(cpu); if (xen_have_vector_callback) xen_init_lock_cpu(cpu); break; @@ -1386,7 +1386,6 @@ static void __init xen_hvm_guest_init(void) xen_hvm_smp_init(); register_cpu_notifier(&xen_hvm_cpu_notifier); xen_unplug_emulated_devices(); - have_vcpu_info_placement = 0; x86_init.irqs.intr_init = xen_init_IRQ; xen_hvm_init_time_ops(); xen_hvm_init_mmu_ops(); -- cgit v0.10.2 From fc6e0c3b909157748ce1c0c0f2a9935a5ee3c812 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:23:32 +0300 Subject: xen-gntdev: integer overflow in gntdev_alloc_map() The multiplications here can overflow resulting in smaller buffer sizes than expected. "count" comes from a copy_from_user(). Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 3987132..afca14d 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -114,11 +114,11 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) if (NULL == add) return NULL; - add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL); - add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL); - add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL); - add->kmap_ops = kzalloc(sizeof(add->kmap_ops[0]) * count, GFP_KERNEL); - add->pages = kzalloc(sizeof(add->pages[0]) * count, GFP_KERNEL); + add->grants = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL); + add->map_ops = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL); + add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL); + add->kmap_ops = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL); + add->pages = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL); if (NULL == add->grants || NULL == add->map_ops || NULL == add->unmap_ops || -- cgit v0.10.2 From 21643e69a4c06f7ef155fbc70e3fba13fba4a756 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:24:08 +0300 Subject: xen-gntalloc: integer overflow in gntalloc_ioctl_alloc() On 32 bit systems a high value of op.count could lead to an integer overflow in the kzalloc() and gref_ids would be smaller than expected. If the you triggered another integer overflow in "if (gref_size + op.count > limit)" then you'd probably get memory corruption inside add_grefs(). CC: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c index f6832f4..23c60cf 100644 --- a/drivers/xen/gntalloc.c +++ b/drivers/xen/gntalloc.c @@ -280,7 +280,7 @@ static long gntalloc_ioctl_alloc(struct gntalloc_file_private_data *priv, goto out; } - gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY); + gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY); if (!gref_ids) { rc = -ENOMEM; goto out; -- cgit v0.10.2 From 99cb2ddcc617f43917e94a4147aa3ccdb2bcd77e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:24:36 +0300 Subject: xen-gntalloc: signedness bug in add_grefs() gref->gref_id is unsigned so the error handling didn't work. gnttab_grant_foreign_access() returns an int type, so we can add a cast here, and it doesn't cause any problems. gnttab_grant_foreign_access() can return a variety of errors including -ENOSPC, -ENOSYS and -ENOMEM. CC: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c index 23c60cf..e1c4c6e 100644 --- a/drivers/xen/gntalloc.c +++ b/drivers/xen/gntalloc.c @@ -135,7 +135,7 @@ static int add_grefs(struct ioctl_gntalloc_alloc_gref *op, /* Grant foreign access to the page. */ gref->gref_id = gnttab_grant_foreign_access(op->domid, pfn_to_mfn(page_to_pfn(gref->page)), readonly); - if (gref->gref_id < 0) { + if ((int)gref->gref_id < 0) { rc = gref->gref_id; goto undo; } -- cgit v0.10.2 From 4cecf6d401a01d054afc1e5f605bcbfe553cb9b9 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Tue, 15 Nov 2011 14:12:06 -0800 Subject: sched, x86: Avoid unnecessary overflow in sched_clock (Added the missing signed-off-by line) In hundreds of days, the __cycles_2_ns calculation in sched_clock has an overflow. cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing the final value to become zero. We can solve this without losing any precision. We can decompose TSC into quotient and remainder of division by the scale factor, and then use this to convert TSC into nanoseconds. Signed-off-by: Salman Qazi Acked-by: John Stultz Reviewed-by: Paul Turner Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index fa7b917..431793e 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -32,6 +32,22 @@ extern int no_timer_check; * (mathieu.desnoyers@polymtl.ca) * * -johnstul@us.ibm.com "math is hard, lets go shopping!" + * + * In: + * + * ns = cycles * cyc2ns_scale / SC + * + * Although we may still have enough bits to store the value of ns, + * in some cases, we may not have enough bits to store cycles * cyc2ns_scale, + * leading to an incorrect result. + * + * To avoid this, we can decompose 'cycles' into quotient and remainder + * of division by SC. Then, + * + * ns = (quot * SC + rem) * cyc2ns_scale / SC + * = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC + * + * - sqazi@google.com */ DECLARE_PER_CPU(unsigned long, cyc2ns); @@ -41,9 +57,14 @@ DECLARE_PER_CPU(unsigned long long, cyc2ns_offset); static inline unsigned long long __cycles_2_ns(unsigned long long cyc) { + unsigned long long quot; + unsigned long long rem; int cpu = smp_processor_id(); unsigned long long ns = per_cpu(cyc2ns_offset, cpu); - ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR; + quot = (cyc >> CYC2NS_SCALE_FACTOR); + rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1); + ns += quot * per_cpu(cyc2ns, cpu) + + ((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR); return ns; } -- cgit v0.10.2 From f4a0d5abef14562c37dee5a1d49180f494106230 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Mon, 24 Oct 2011 08:17:42 -0400 Subject: encrypted-keys: fix error return code Fix request_master_key() error return code. Signed-off-by: Mimi Zohar diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index dcc843c..41144f7 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -444,7 +444,7 @@ static struct key *request_master_key(struct encrypted_key_payload *epayload, goto out; if (IS_ERR(mkey)) { - int ret = PTR_ERR(epayload); + int ret = PTR_ERR(mkey); if (ret == -ENOTSUPP) pr_info("encrypted_key: key %s not supported", -- cgit v0.10.2 From 9c69898783a0121399ec078d40d4ccc00e3cb0df Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Sun, 16 Oct 2011 19:17:48 -0400 Subject: encrypted-keys: module build fixes Encrypted keys are encrypted/decrypted using either a trusted or user-defined key type, which is referred to as the 'master' key. The master key may be of type trusted iff the trusted key is builtin or both the trusted key and encrypted keys are built as modules. This patch resolves the build dependency problem. - Use "masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS)" construct to encapsulate the above logic. (Suggested by Dimtry Kasatkin.) - Fixing the encrypted-keys Makefile, results in a module name change from encrypted.ko to encrypted-keys.ko. - Add module dependency for request_trusted_key() definition Signed-off-by: Mimi Zohar diff --git a/security/keys/encrypted-keys/Makefile b/security/keys/encrypted-keys/Makefile index 6bc7a86..d6f8433 100644 --- a/security/keys/encrypted-keys/Makefile +++ b/security/keys/encrypted-keys/Makefile @@ -2,5 +2,9 @@ # Makefile for encrypted keys # -obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o -obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o +obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o + +encrypted-keys-y := encrypted.o ecryptfs_format.o +masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o +masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o +encrypted-keys-y += $(masterkey-y) $(masterkey-m-m) diff --git a/security/keys/encrypted-keys/encrypted.h b/security/keys/encrypted-keys/encrypted.h index b6ade89..8136a2d 100644 --- a/security/keys/encrypted-keys/encrypted.h +++ b/security/keys/encrypted-keys/encrypted.h @@ -2,7 +2,8 @@ #define __ENCRYPTED_KEY_H #define ENCRYPTED_DEBUG 0 -#ifdef CONFIG_TRUSTED_KEYS +#if defined(CONFIG_TRUSTED_KEYS) || \ + (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE)) extern struct key *request_trusted_key(const char *trusted_desc, u8 **master_key, size_t *master_keylen); #else -- cgit v0.10.2 From f9849100851b28c8ad83e86d68d5110497a4e9d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 16 Nov 2011 11:52:12 +0000 Subject: watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() Reported-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 7be3855..e789a47 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -150,7 +150,7 @@ static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev, if (wm831x_wdt_cfgs[i].time == timeout) break; if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) - ret = -EINVAL; + return -EINVAL; ret = wm831x_reg_unlock(wm831x); if (ret == 0) { -- cgit v0.10.2 From 20403e845f9988446c5b48024ff4d0c3a5929f7d Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Wed, 16 Nov 2011 12:46:13 +0400 Subject: watchdog: fix initialisation printout in s3c2410_wdt Looks like a typo creeped in, and driver prints s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled instead of s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled Also it may completely disinform about irq status, as it prints "irq enabled" when S3C2410_WTCON_INTEN is in fact 0. Fix it. Signed-off-by: Dmitry Artamonow Tested-by: Thomas Abraham Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 5de7e4f..a79e384 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -401,8 +401,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n", (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", - (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", - (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); + (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis", + (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis"); return 0; -- cgit v0.10.2 From 8d514bbf37eecf0a3e309284728637816a36764b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 16:06:09 -0500 Subject: btrfs: fix double mntput() in mount_subvol() Signed-off-by: Al Viro diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 8bd9d6d..969a774 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -861,7 +861,6 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, if (!is_subvolume_inode(path.dentry->d_inode)) { path_put(&path); - mntput(mnt); error = -EINVAL; printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n", subvol_name); -- cgit v0.10.2 From c13344958780b4046305ee6235d686c846535529 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 16:12:14 -0500 Subject: switch create_mnt_ns() to saner calling conventions, fix double mntput() in nfs Life is much saner if create_mnt_ns(mnt) drops mnt in case of error... Switch it to such calling conventions, switch callers, fix double mntput() in fs/nfs/super.c one. Signed-off-by: Al Viro diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 969a774..cfbedd7 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -843,10 +843,8 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, return ERR_CAST(mnt); ns_private = create_mnt_ns(mnt); - if (IS_ERR(ns_private)) { - mntput(mnt); + if (IS_ERR(ns_private)) return ERR_CAST(ns_private); - } /* * This will trigger the automount of the subvol so we can just diff --git a/fs/namespace.c b/fs/namespace.c index e5e1c7d..aea4b768 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2483,6 +2483,8 @@ struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) __mnt_make_longterm(mnt); new_ns->root = mnt; list_add(&new_ns->list, &new_ns->root->mnt_list); + } else { + mntput(mnt); } return new_ns; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 480b3b6..46d69f38 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2794,22 +2794,21 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, int ret; ns_private = create_mnt_ns(root_mnt); - ret = PTR_ERR(ns_private); if (IS_ERR(ns_private)) - goto out_mntput; + return ERR_CAST(ns_private); ret = nfs_referral_loop_protect(); - if (ret != 0) - goto out_put_mnt_ns; - - ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); + if (ret == 0) { + ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, + export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, + &path); + nfs_referral_loop_unprotect(); + } - nfs_referral_loop_unprotect(); put_mnt_ns(ns_private); if (ret != 0) - goto out_err; + return ERR_PTR(ret); s = path.mnt->mnt_sb; atomic_inc(&s->s_active); @@ -2818,12 +2817,6 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, path_put(&path); down_write(&s->s_umount); return dentry; -out_put_mnt_ns: - put_mnt_ns(ns_private); -out_mntput: - mntput(root_mnt); -out_err: - return ERR_PTR(ret); } static struct dentry *nfs4_try_mount(int flags, const char *dev_name, -- cgit v0.10.2 From 709e8697af1c86772c1a6fccda6d4b0e2e226547 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 14 Nov 2011 10:56:56 +0000 Subject: tcp: clear xmit timers in tcp_v4_syn_recv_sock() Simon Kirby reported divides by zero errors in __tcp_select_window() This happens when inet_csk_route_child_sock() returns a NULL pointer : We free new socket while we eventually armed keepalive timer in tcp_create_openreq_child() Fix this by a call to tcp_clear_xmit_timers() [ This is a followup to commit 918eb39962dff (net: add missing bh_unlock_sock() calls) ] Reported-by: Simon Kirby Signed-off-by: Eric Dumazet Tested-by: Simon Kirby Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a744315..a9db4b1 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1510,6 +1510,7 @@ exit: NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS); return NULL; put_and_exit: + tcp_clear_xmit_timers(newsk); bh_unlock_sock(newsk); sock_put(newsk); goto exit; -- cgit v0.10.2 From 6cc31d09bedeb6f25951b18c23b6aee5df0a242c Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 15 Nov 2011 02:31:12 +0000 Subject: qeth: return with -EPERM if sniffing is not enabled Without appropriate configuration at the SE, a HiperSockets device cannot be used for sniffing. Setting the sniffer attribute is rejected with -EPERM. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 0ea2fbf..d979bb2 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -335,10 +335,10 @@ static ssize_t qeth_l3_dev_sniffer_store(struct device *dev, QETH_IN_BUF_COUNT_MAX) qeth_realloc_buffer_pool(card, QETH_IN_BUF_COUNT_MAX); - break; } else rc = -EPERM; - default: /* fall through */ + break; + default: rc = -EINVAL; } out: -- cgit v0.10.2 From 7c01a8e56bf8a03b9b50a770de36abfee03c4fc5 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 15 Nov 2011 02:31:13 +0000 Subject: qeth: remove WARN_ON leftover The patch "qeth: exploit asynchronous delivery of storage blocks" added a WARN_ON in qeth_schedule_recovery. A device recovery should not cause a kernel warning. This is obviously a debugging left-over that we forgot to remove. Signed-off-by: Christian Borntraeger Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 8153443..fff57de 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -881,7 +881,6 @@ EXPORT_SYMBOL_GPL(qeth_do_run_thread); void qeth_schedule_recovery(struct qeth_card *card) { QETH_CARD_TEXT(card, 2, "startrec"); - WARN_ON(1); if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0) schedule_work(&card->kernel_thread_starter); } -- cgit v0.10.2 From 1d503563f7601a249d015d3fad40b08e8d6a394b Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 15 Nov 2011 02:31:14 +0000 Subject: netiucv: reinsert dev_alloc_name for device naming Invocation of dev_alloc_name() is re-inserted, because the created net_device name is used to create the device name for the iucv bus. This device is created before the register_netdev call. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 3251333..b6a6356 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -1994,6 +1994,8 @@ static struct net_device *netiucv_init_netdevice(char *username) netiucv_setup_netdevice); if (!dev) return NULL; + if (dev_alloc_name(dev, dev->name) < 0) + goto out_netdev; privptr = netdev_priv(dev); privptr->fsm = init_fsm("netiucvdev", dev_state_names, -- cgit v0.10.2 From 1d36cb479f204a0fedc1a3e7ce7b32c0a2c48769 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Tue, 15 Nov 2011 02:31:15 +0000 Subject: qeth: l3 fix rcu splat in xmit when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index e4c1176..4d5307d 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2756,11 +2756,13 @@ int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb) struct neighbour *n = NULL; struct dst_entry *dst; + rcu_read_lock(); dst = skb_dst(skb); if (dst) n = dst_get_neighbour(dst); if (n) { cast_type = n->type; + rcu_read_unlock(); if ((cast_type == RTN_BROADCAST) || (cast_type == RTN_MULTICAST) || (cast_type == RTN_ANYCAST)) @@ -2768,6 +2770,8 @@ int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb) else return RTN_UNSPEC; } + rcu_read_unlock(); + /* try something else */ if (skb->protocol == ETH_P_IPV6) return (skb_network_header(skb)[24] == 0xff) ? @@ -2847,6 +2851,8 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, } hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr); + + rcu_read_lock(); dst = skb_dst(skb); if (dst) n = dst_get_neighbour(dst); @@ -2893,6 +2899,7 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, QETH_CAST_UNICAST | QETH_HDR_PASSTHRU; } } + rcu_read_unlock(); } static inline void qeth_l3_hdr_csum(struct qeth_card *card, -- cgit v0.10.2 From 0284a0fdf3def1beb4de509f87472520b23883c9 Mon Sep 17 00:00:00 2001 From: Einar Lueck Date: Tue, 15 Nov 2011 02:31:16 +0000 Subject: qeth: Reduce CPU consumption through less SIGA-r calls Patch avoids SIGA-r calls in case of SIGA-r required. It only calls SIGA-r if a threshold of free buffer is reached. CPU consumption is reduced as a consequence. Signed-off-by: Einar Lueck Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index b77c65e..4abc79d 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -236,8 +236,7 @@ static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, #define QETH_IN_BUF_COUNT_MAX 128 #define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12) #define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \ - ((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \ - ((card)->qdio.in_buf_pool.buf_count / 2)) + ((card)->qdio.in_buf_pool.buf_count / 2) /* buffers we have to be behind before we get a PCI */ #define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1) -- cgit v0.10.2 From fa2da8cdae1dd64f78fc915ca1d1a4a93c71e7cb Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Tue, 15 Nov 2011 08:09:14 +0000 Subject: bridge: correct IPv6 checksum after pull Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. When bytes are removed from skb, the computed checksum needs to be adjusted. Signed-off-by: Stephen Hemminger Tested-by: Martin Volf Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 2eefe27..a5f4e57 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1501,6 +1501,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, __skb_pull(skb2, offset); skb_reset_transport_header(skb2); + skb_postpull_rcsum(skb2, skb_network_header(skb2), + skb_network_header_len(skb2)); icmp6_type = icmp6_hdr(skb2)->icmp6_type; -- cgit v0.10.2 From eccab1ec87d093d5104e6aade674223b5b625d39 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 15 Nov 2011 09:36:30 +0000 Subject: net/cadence: enable by default NET_ATMEL so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 98849a1..b48378a 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -7,6 +7,7 @@ config HAVE_NET_MACB config NET_ATMEL bool "Atmel devices" + default y depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200) ---help--- If you have a network (Ethernet) card belonging to this class, say Y. -- cgit v0.10.2 From eb2afd4a622985eaccfa8c7fc83e890b8930e0ab Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 15 Nov 2011 12:07:33 +0000 Subject: bnx2x: cache-in compressed fw image Re-request fw from fs may fail for different reasons, once the fw was loaded we won't release it until driver is removed. This also resolves the boot problem when initial fw is located on initrd, but rootfs is still unavailable, in this case device reset will fail due to absence of fw files. Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6486ab8..2f6361e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10548,33 +10548,38 @@ do { \ int bnx2x_init_firmware(struct bnx2x *bp) { - const char *fw_file_name; struct bnx2x_fw_file_hdr *fw_hdr; int rc; - if (CHIP_IS_E1(bp)) - fw_file_name = FW_FILE_NAME_E1; - else if (CHIP_IS_E1H(bp)) - fw_file_name = FW_FILE_NAME_E1H; - else if (!CHIP_IS_E1x(bp)) - fw_file_name = FW_FILE_NAME_E2; - else { - BNX2X_ERR("Unsupported chip revision\n"); - return -EINVAL; - } - BNX2X_DEV_INFO("Loading %s\n", fw_file_name); + if (!bp->firmware) { + const char *fw_file_name; - rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); - if (rc) { - BNX2X_ERR("Can't load firmware file %s\n", fw_file_name); - goto request_firmware_exit; - } + if (CHIP_IS_E1(bp)) + fw_file_name = FW_FILE_NAME_E1; + else if (CHIP_IS_E1H(bp)) + fw_file_name = FW_FILE_NAME_E1H; + else if (!CHIP_IS_E1x(bp)) + fw_file_name = FW_FILE_NAME_E2; + else { + BNX2X_ERR("Unsupported chip revision\n"); + return -EINVAL; + } + BNX2X_DEV_INFO("Loading %s\n", fw_file_name); - rc = bnx2x_check_firmware(bp); - if (rc) { - BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); - goto request_firmware_exit; + rc = request_firmware(&bp->firmware, fw_file_name, + &bp->pdev->dev); + if (rc) { + BNX2X_ERR("Can't load firmware file %s\n", + fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } } fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; @@ -10630,6 +10635,7 @@ static void bnx2x_release_firmware(struct bnx2x *bp) kfree(bp->init_ops); kfree(bp->init_data); release_firmware(bp->firmware); + bp->firmware = NULL; } @@ -10925,6 +10931,8 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) if (bp->doorbells) iounmap(bp->doorbells); + bnx2x_release_firmware(bp); + bnx2x_free_mem_bp(bp); free_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 0440425..1451769 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -5380,7 +5380,7 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, rc = drv->init_fw(bp); if (rc) { BNX2X_ERR("Error loading firmware\n"); - goto fw_init_err; + goto init_err; } /* Handle the beginning of COMMON_XXX pases separatelly... */ @@ -5388,25 +5388,25 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: rc = bnx2x_func_init_cmn_chip(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_COMMON: rc = bnx2x_func_init_cmn(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_PORT: rc = bnx2x_func_init_port(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; case FW_MSG_CODE_DRV_LOAD_FUNCTION: rc = bnx2x_func_init_func(bp, drv); if (rc) - goto init_hw_err; + goto init_err; break; default: @@ -5414,10 +5414,7 @@ static int bnx2x_func_hw_init(struct bnx2x *bp, rc = -EINVAL; } -init_hw_err: - drv->release_fw(bp); - -fw_init_err: +init_err: drv->gunzip_end(bp); /* In case of success, complete the comand immediatelly: no ramrods -- cgit v0.10.2 From 5e773fdc535cf3f4fa8023fe2ce20dcf774dae8a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 15 Nov 2011 13:56:14 +0000 Subject: pch_gbe: Move #include of module.h The first #include must be pch_gbe.h as it does a #define of pr_fmt. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 9c075ea..9cb5f91 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -18,8 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ -#include /* for __MODULE_STRING */ #include "pch_gbe.h" +#include /* for __MODULE_STRING */ #define OPTION_UNSET -1 #define OPTION_DISABLED 0 -- cgit v0.10.2 From 377a4673147d0144cf4951bf91f4c867a2c18e5e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 16 Nov 2011 17:58:46 -0500 Subject: MAINTAINERS: change email address for shemminger My old email account at linux-foundation is no longer usable after the LF breakin. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..aa11a57 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2576,7 +2576,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4462,7 +4462,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c @@ -5977,7 +5977,7 @@ S: Maintained F: drivers/usb/misc/sisusbvga/ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* -- cgit v0.10.2 From 9b7c547f7747991fe62f622698ea1bf470f256f4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 16 Nov 2011 21:44:33 +0800 Subject: ARM: Update mach-types to fix mxs build breakage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add entry m28evk to fix the following mxs build breakage. CHK include/generated/compile.h CC arch/arm/mach-mxs/clock-mx28.o arch/arm/mach-mxs/clock-mx28.c: In function 'clk_misc_init': arch/arm/mach-mxs/clock-mx28.c:748: error: implicit declaration of function 'machine_is_m28evk' make[1]: *** [arch/arm/mach-mxs/clock-mx28.o] Error 1 make: *** [arch/arm/mach-mxs] Error 2 Signed-off-by: Shawn Guo Acked-by: Uwe Kleine-König diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5bdeef9..ccbe16f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -1123,5 +1123,6 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +m28evk MACH_M28EVK M28EVK 3613 smdk4212 MACH_SMDK4212 SMDK4212 3638 smdk4412 MACH_SMDK4412 SMDK4412 3765 -- cgit v0.10.2 From e4b3bbe31d9a1e9540c6e9c95f5e7fd92acbcacf Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 11 Nov 2011 20:11:14 +0800 Subject: ARM: pxa168/gplugd: add the correct SSP device There is no SSP0, but SSP1 is used on gplugd as an I2S port. Acked-by: Tanmay Upadhyay Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 6915656..4665767 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -182,7 +182,7 @@ static void __init gplugd_init(void) /* on-chip devices */ pxa168_add_uart(3); - pxa168_add_ssp(0); + pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); pxa168_add_eth(&gplugd_eth_platform_data); -- cgit v0.10.2 From 0d2f096b8785b67c38afcf6e1fbb9674af2e05ca Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Wed, 16 Nov 2011 10:50:56 -0800 Subject: random: Fix handing of arch_get_random_long in get_random_bytes() If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by: Tony Luck Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/4ec4061010261a4cb0@agluck-desktop.sc.intel.com Signed-off-by: H. Peter Anvin diff --git a/drivers/char/random.c b/drivers/char/random.c index 63e19ba..6035ab8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -941,7 +941,7 @@ void get_random_bytes(void *buf, int nbytes) if (!arch_get_random_long(&v)) break; - memcpy(buf, &v, chunk); + memcpy(p, &v, chunk); p += chunk; nbytes -= chunk; } -- cgit v0.10.2 From 396464dfbba8f734c57346489b871e7ed64dcdd1 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Mon, 14 Nov 2011 15:20:49 +0900 Subject: drm/exynos: Add disable of manager Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 2d74f85..5e02e6e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -147,12 +147,14 @@ struct exynos_drm_display_ops { * @mode_set: convert drm_display_mode to hw specific display mode and * would be called by encoder->mode_set(). * @commit: set current hw specific display mode to hw. + * @disable: disable hardware specific display mode. * @enable_vblank: specific driver callback for enabling vblank interrupt. * @disable_vblank: specific driver callback for disabling vblank interrupt. */ struct exynos_drm_manager_ops { void (*mode_set)(struct device *subdrv_dev, void *mode); void (*commit)(struct device *subdrv_dev); + void (*disable)(struct device *subdrv_dev); int (*enable_vblank)(struct device *subdrv_dev); void (*disable_vblank)(struct device *subdrv_dev); }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 866f419..1530614 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -53,9 +53,27 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct drm_connector *connector; struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); + struct exynos_drm_manager_ops *manager_ops = manager->ops; DRM_DEBUG_KMS("%s, encoder dpms: %d\n", __FILE__, mode); + switch (mode) { + case DRM_MODE_DPMS_ON: + if (manager_ops && manager_ops->commit) + manager_ops->commit(manager->dev); + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + /* TODO */ + if (manager_ops && manager_ops->disable) + manager_ops->disable(manager->dev); + break; + default: + DRM_ERROR("unspecified mode %d\n", mode); + break; + } + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { struct exynos_drm_display_ops *display_ops = diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 272c3b5..db3b3d9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -177,6 +177,40 @@ static void fimd_commit(struct device *dev) writel(val, ctx->regs + VIDCON0); } +static void fimd_disable(struct device *dev) +{ + struct fimd_context *ctx = get_fimd_context(dev); + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct drm_device *drm_dev = subdrv->drm_dev; + struct exynos_drm_manager *manager = &subdrv->manager; + u32 val; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + /* fimd dma off */ + val = readl(ctx->regs + VIDCON0); + val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); + writel(val, ctx->regs + VIDCON0); + + /* + * if vblank is enabled status with dma off then + * it disables vsync interrupt. + */ + if (drm_dev->vblank_enabled[manager->pipe] && + atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { + drm_vblank_put(drm_dev, manager->pipe); + + /* + * if vblank_disable_allowed is 0 then disable + * vsync interrupt right now else the vsync interrupt + * would be disabled by drm timer once a current process + * gives up ownershop of vblank event. + */ + if (!drm_dev->vblank_disable_allowed) + drm_vblank_off(drm_dev, manager->pipe); + } +} + static int fimd_enable_vblank(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); @@ -220,6 +254,7 @@ static void fimd_disable_vblank(struct device *dev) static struct exynos_drm_manager_ops fimd_manager_ops = { .commit = fimd_commit, + .disable = fimd_disable, .enable_vblank = fimd_enable_vblank, .disable_vblank = fimd_disable_vblank, }; @@ -447,9 +482,6 @@ static void fimd_win_commit(struct device *dev) static void fimd_win_disable(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct drm_device *drm_dev = subdrv->drm_dev; - struct exynos_drm_manager *manager = &subdrv->manager; int win = ctx->default_win; u32 val; @@ -473,29 +505,6 @@ static void fimd_win_disable(struct device *dev) val &= ~SHADOWCON_CHx_ENABLE(win); val &= ~SHADOWCON_WINx_PROTECT(win); writel(val, ctx->regs + SHADOWCON); - - /* fimd dma off. */ - val = readl(ctx->regs + VIDCON0); - val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F); - writel(val, ctx->regs + VIDCON0); - - /* - * if vblank is enabled status with dma off then - * it disables vsync interrupt. - */ - if (drm_dev->vblank_enabled[manager->pipe] && - atomic_read(&drm_dev->vblank_refcount[manager->pipe])) { - drm_vblank_put(drm_dev, manager->pipe); - - /* - * if vblank_disable_allowed is 0 then disable vsync interrupt - * right now else the vsync interrupt would be disabled by drm - * timer once a current process gives up ownershop of - * vblank event. - */ - if (!drm_dev->vblank_disable_allowed) - drm_vblank_off(drm_dev, manager->pipe); - } } static struct exynos_drm_overlay_ops fimd_overlay_ops = { -- cgit v0.10.2 From ca22e3cc25f180859561f36d51bf21278db5ae11 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Tue, 15 Nov 2011 16:25:39 +0900 Subject: drm/exynos: fixed wrong err ptr usage and destroy call in exeception - exynos_drm_buf_create() returns err pointer so NULL check is wrong. - Case that exynos_gem_obj is not created, destroy call in exception handle lable uses this pointer. so instead buffer is directly used. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index b1b94b1..aba0fe4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -128,30 +128,25 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, struct exynos_drm_gem_obj *exynos_gem_obj = NULL; struct exynos_drm_gem_buf *buffer; - int ret; size = roundup(size, PAGE_SIZE); DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); buffer = exynos_drm_buf_create(dev, size); - if (!buffer) - return ERR_PTR(-ENOMEM); + if (IS_ERR(buffer)) { + return ERR_CAST(buffer); + } exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size); if (IS_ERR(exynos_gem_obj)) { - ret = PTR_ERR(exynos_gem_obj); - goto err_gem_init; + exynos_drm_buf_destroy(dev, buffer); + return exynos_gem_obj; } exynos_gem_obj->buffer = buffer; return exynos_gem_obj; - -err_gem_init: - exynos_drm_buf_destroy(dev, exynos_gem_obj->buffer); - - return ERR_PTR(ret); } int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data, -- cgit v0.10.2 From bbc13ab9d26f4ff675775dd7dc24d5cae17b85d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 16 Nov 2011 06:00:08 +0000 Subject: r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list We are checking whether the MCR0_HASHEN bit is set using a logical and instead of bitwise and, fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c index 1fc01ca..4bf68cf 100644 --- a/drivers/net/ethernet/rdc/r6040.c +++ b/drivers/net/ethernet/rdc/r6040.c @@ -940,7 +940,7 @@ static void r6040_multicast_list(struct net_device *dev) iowrite16(lp->mcr0, ioaddr + MCR0); /* Fill the MAC hash tables with their values */ - if (lp->mcr0 && MCR0_HASH_EN) { + if (lp->mcr0 & MCR0_HASH_EN) { iowrite16(hash_table[0], ioaddr + MAR0); iowrite16(hash_table[1], ioaddr + MAR1); iowrite16(hash_table[2], ioaddr + MAR2); -- cgit v0.10.2 From 1401a8008a09e079236261be37e98847c799760a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:55 +0000 Subject: sky2: fix hang on shutdown (and other irq issues) There are several problems with recent change to how IRQ's are setup. * synchronize_irq in sky2_shutdown would hang because there was no IRQ setup. * when device was set to down, some IRQ bits left enabled so a hardware error would produce IRQ with no handler * quick link on Optima chip set was enabled without handler * suspend/resume would leave IRQ on with no handler if device was down Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index fdc6c39..f9c4529 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1747,6 +1747,11 @@ static int sky2_up(struct net_device *dev) sky2_hw_up(sky2); + if (hw->chip_id == CHIP_ID_YUKON_OPT || + hw->chip_id == CHIP_ID_YUKON_PRM || + hw->chip_id == CHIP_ID_YUKON_OP_2) + imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */ + /* Enable interrupts from phy/mac for port */ imask = sky2_read32(hw, B0_IMSK); imask |= portirq_msk[port]; @@ -2101,15 +2106,21 @@ static int sky2_down(struct net_device *dev) netif_info(sky2, ifdown, dev, "disabling interface\n"); - /* Disable port IRQ */ - sky2_write32(hw, B0_IMSK, - sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]); - sky2_read32(hw, B0_IMSK); - if (hw->ports == 1) { + sky2_write32(hw, B0_IMSK, 0); + sky2_read32(hw, B0_IMSK); + napi_disable(&hw->napi); free_irq(hw->pdev->irq, hw); } else { + u32 imask; + + /* Disable port IRQ */ + imask = sky2_read32(hw, B0_IMSK); + imask &= ~portirq_msk[sky2->port]; + sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); + synchronize_irq(hw->pdev->irq); napi_synchronize(&hw->napi); } @@ -3258,7 +3269,6 @@ static void sky2_reset(struct sky2_hw *hw) hw->chip_id == CHIP_ID_YUKON_PRM || hw->chip_id == CHIP_ID_YUKON_OP_2) { u16 reg; - u32 msk; if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */ @@ -3281,11 +3291,6 @@ static void sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); - /* enable PHY Quick Link */ - msk = sky2_read32(hw, B0_IMSK); - msk |= Y2_IS_PHY_QLNK; - sky2_write32(hw, B0_IMSK, msk); - /* check if PSMv2 was running before */ reg = sky2_pci_read16(hw, PSM_CONFIG_REG3); if (reg & PCI_EXP_LNKCTL_ASPMC) @@ -3412,7 +3417,9 @@ static void sky2_all_down(struct sky2_hw *hw) sky2_read32(hw, B0_IMSK); sky2_write32(hw, B0_IMSK, 0); - synchronize_irq(hw->pdev->irq); + + if (hw->ports > 1 || netif_running(hw->dev[0])) + synchronize_irq(hw->pdev->irq); napi_disable(&hw->napi); for (i = 0; i < hw->ports; i++) { @@ -3430,7 +3437,7 @@ static void sky2_all_down(struct sky2_hw *hw) static void sky2_all_up(struct sky2_hw *hw) { - u32 imask = Y2_IS_BASE; + u32 imask = 0; int i; for (i = 0; i < hw->ports; i++) { @@ -3446,11 +3453,13 @@ static void sky2_all_up(struct sky2_hw *hw) netif_wake_queue(dev); } - sky2_write32(hw, B0_IMSK, imask); - sky2_read32(hw, B0_IMSK); - - sky2_read32(hw, B0_Y2_SP_LISR); - napi_enable(&hw->napi); + if (imask || hw->ports > 1) { + imask |= Y2_IS_BASE; + sky2_write32(hw, B0_IMSK, imask); + sky2_read32(hw, B0_IMSK); + sky2_read32(hw, B0_Y2_SP_LISR); + napi_enable(&hw->napi); + } } static void sky2_restart(struct work_struct *work) -- cgit v0.10.2 From f9687c44d322ca1bcbc362c8a54084425fda3ab8 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:56 +0000 Subject: sky2: pci posting issues A couple of the reset and setup paths have possible PCI posting issues. When setting registers, a read is necessary to force the writes to complete. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index f9c4529..98ad38a 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -869,6 +869,7 @@ static void sky2_wol_init(struct sky2_port *sky2) /* block receiver */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + sky2_read32(hw, B0_CTST); } static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) @@ -2045,6 +2046,8 @@ static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + + sky2_read32(hw, B0_CTST); } static void sky2_hw_down(struct sky2_port *sky2) -- cgit v0.10.2 From 926d0977b28793533a99ec66484385b5f602e9c8 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:57 +0000 Subject: sky2: rename up/down functions The code is clearer if the up/down functions are renamed to open/close like other drivers. Purely syntax change. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 98ad38a..98d435a 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1728,7 +1728,7 @@ static int sky2_setup_irq(struct sky2_hw *hw, const char *name) /* Bring up network interface. */ -static int sky2_up(struct net_device *dev) +static int sky2_open(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; @@ -2098,7 +2098,7 @@ static void sky2_hw_down(struct sky2_port *sky2) } /* Network shutdown */ -static int sky2_down(struct net_device *dev) +static int sky2_close(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; @@ -2601,7 +2601,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) if (netif_running(dev)) { sky2_tx_complete(sky2, last); - /* Wake unless it's detached, and called e.g. from sky2_down() */ + /* Wake unless it's detached, and called e.g. from sky2_close() */ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } @@ -3391,7 +3391,7 @@ static void sky2_detach(struct net_device *dev) netif_tx_lock(dev); netif_device_detach(dev); /* stop txq */ netif_tx_unlock(dev); - sky2_down(dev); + sky2_close(dev); } } @@ -3401,7 +3401,7 @@ static int sky2_reattach(struct net_device *dev) int err = 0; if (netif_running(dev)) { - err = sky2_up(dev); + err = sky2_open(dev); if (err) { netdev_info(dev, "could not restart %d\n", err); dev_close(dev); @@ -4568,7 +4568,7 @@ static int sky2_device_event(struct notifier_block *unused, struct net_device *dev = ptr; struct sky2_port *sky2 = netdev_priv(dev); - if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug) + if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug) return NOTIFY_DONE; switch (event) { @@ -4633,8 +4633,8 @@ static __exit void sky2_debug_cleanup(void) not allowing netpoll on second port */ static const struct net_device_ops sky2_netdev_ops[2] = { { - .ndo_open = sky2_up, - .ndo_stop = sky2_down, + .ndo_open = sky2_open, + .ndo_stop = sky2_close, .ndo_start_xmit = sky2_xmit_frame, .ndo_do_ioctl = sky2_ioctl, .ndo_validate_addr = eth_validate_addr, @@ -4650,8 +4650,8 @@ static const struct net_device_ops sky2_netdev_ops[2] = { #endif }, { - .ndo_open = sky2_up, - .ndo_stop = sky2_down, + .ndo_open = sky2_open, + .ndo_stop = sky2_close, .ndo_start_xmit = sky2_xmit_frame, .ndo_do_ioctl = sky2_ioctl, .ndo_validate_addr = eth_validate_addr, -- cgit v0.10.2 From b1cb82566242fbb54d5c655e23995a8f7bd37ecf Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:58 +0000 Subject: sky2: reduce default Tx ring size The default Tx ring size for the sky2 driver is quite large and could cause excess buffer bloat for many users. The minimum ring size possible and still allow handling the worst case packet on 64bit platforms is 38 which gets rounded up to a power of 2. But most packets only require a couple of ring elements. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 98d435a..3777fb3 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -68,7 +68,7 @@ #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1)) #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) #define TX_MAX_PENDING 1024 -#define TX_DEF_PENDING 127 +#define TX_DEF_PENDING 63 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 -- cgit v0.10.2 From 00427a7387a1c91ddb6b69e50916173d8aca66e0 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:42:59 +0000 Subject: sky2: used fixed RSS key Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 3777fb3..48c9e12 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1275,6 +1275,14 @@ static void rx_set_checksum(struct sky2_port *sky2) ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } +/* + * Fixed initial key as seed to RSS. + */ +static const uint32_t rss_init_key[10] = { + 0x7c3351da, 0x51c5cf4e, 0x44adbdd1, 0xe8d38d18, 0x48897c43, + 0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30 +}; + /* Enable/disable receive hash calculation (RSS) */ static void rx_set_rss(struct net_device *dev, u32 features) { @@ -1290,12 +1298,9 @@ static void rx_set_rss(struct net_device *dev, u32 features) /* Program RSS initial values */ if (features & NETIF_F_RXHASH) { - u32 key[nkeys]; - - get_random_bytes(key, nkeys * sizeof(u32)); for (i = 0; i < nkeys; i++) sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4), - key[i]); + rss_init_key[i]); /* Need to turn on (undocumented) flag to make hashing work */ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), -- cgit v0.10.2 From d9fa7c86f1fca60693beea187c963cfda4a54a06 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 16 Nov 2011 13:43:00 +0000 Subject: sky2: version 1.30 Update version number. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 48c9e12..539de09 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.29" +#define DRV_VERSION "1.30" /* * The Yukon II chipset takes 64 bit command blocks (called list elements) -- cgit v0.10.2 From ea441d1104cf1efb471fa81bc91e9fd1e6ae29fd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 16 Nov 2011 21:43:59 -0500 Subject: new helper: mount_subtree() takes vfsmount and relative path, does lookup within that vfsmount (possibly triggering automounts) and returns the result as root of subtree suitable for return by ->mount() (i.e. a reference to dentry and an active reference to its superblock grabbed, superblock locked exclusive). btrfs and nfs switched to it instead of open-coding the sucker. Signed-off-by: Al Viro diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index cfbedd7..17ee7fc 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -825,13 +825,9 @@ static char *setup_root_args(char *args) static struct dentry *mount_subvol(const char *subvol_name, int flags, const char *device_name, char *data) { - struct super_block *s; struct dentry *root; struct vfsmount *mnt; - struct mnt_namespace *ns_private; char *newargs; - struct path path; - int error; newargs = setup_root_args(data); if (!newargs) @@ -842,36 +838,17 @@ static struct dentry *mount_subvol(const char *subvol_name, int flags, if (IS_ERR(mnt)) return ERR_CAST(mnt); - ns_private = create_mnt_ns(mnt); - if (IS_ERR(ns_private)) - return ERR_CAST(ns_private); - - /* - * This will trigger the automount of the subvol so we can just - * drop the mnt we have here and return the dentry that we - * found. - */ - error = vfs_path_lookup(mnt->mnt_root, mnt, subvol_name, - LOOKUP_FOLLOW, &path); - put_mnt_ns(ns_private); - if (error) - return ERR_PTR(error); + root = mount_subtree(mnt, subvol_name); - if (!is_subvolume_inode(path.dentry->d_inode)) { - path_put(&path); - error = -EINVAL; + if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) { + struct super_block *s = root->d_sb; + dput(root); + root = ERR_PTR(-EINVAL); + deactivate_locked_super(s); printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n", subvol_name); - return ERR_PTR(-EINVAL); } - /* Get a ref to the sb and the dentry we found and return it */ - s = path.mnt->mnt_sb; - atomic_inc(&s->s_active); - root = dget(path.dentry); - path_put(&path); - down_write(&s->s_umount); - return root; } diff --git a/fs/namespace.c b/fs/namespace.c index aea4b768..50ee303 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2490,6 +2490,34 @@ struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt) } EXPORT_SYMBOL(create_mnt_ns); +struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) +{ + struct mnt_namespace *ns; + struct path path; + int err; + + ns = create_mnt_ns(mnt); + if (IS_ERR(ns)) + return ERR_CAST(ns); + + err = vfs_path_lookup(mnt->mnt_root, mnt, + name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); + + put_mnt_ns(ns); + + if (err) + return ERR_PTR(err); + + /* trade a vfsmount reference for active sb one */ + atomic_inc(&path.mnt->mnt_sb->s_active); + mntput(path.mnt); + /* lock the sucker */ + down_write(&path.mnt->mnt_sb->s_umount); + /* ... and return the root of (sub)tree on it */ + return path.dentry; +} +EXPORT_SYMBOL(mount_subtree); + SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name, char __user *, type, unsigned long, flags, void __user *, data) { diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 46d69f38..1347774 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2787,35 +2787,17 @@ static void nfs_referral_loop_unprotect(void) static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, const char *export_path) { - struct mnt_namespace *ns_private; - struct super_block *s; struct dentry *dentry; - struct path path; - int ret; + int ret = nfs_referral_loop_protect(); - ns_private = create_mnt_ns(root_mnt); - if (IS_ERR(ns_private)) - return ERR_CAST(ns_private); - - ret = nfs_referral_loop_protect(); - if (ret == 0) { - ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, - &path); - nfs_referral_loop_unprotect(); - } - - put_mnt_ns(ns_private); - - if (ret != 0) + if (ret) { + mntput(root_mnt); return ERR_PTR(ret); + } - s = path.mnt->mnt_sb; - atomic_inc(&s->s_active); - dentry = dget(path.dentry); + dentry = mount_subtree(root_mnt, export_path); + nfs_referral_loop_unprotect(); - path_put(&path); - down_write(&s->s_umount); return dentry; } diff --git a/include/linux/fs.h b/include/linux/fs.h index 0c4df26..e313022 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1886,6 +1886,7 @@ extern struct dentry *mount_single(struct file_system_type *fs_type, extern struct dentry *mount_nodev(struct file_system_type *fs_type, int flags, void *data, int (*fill_super)(struct super_block *, void *, int)); +extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path); void generic_shutdown_super(struct super_block *sb); void kill_block_super(struct super_block *sb); void kill_anon_super(struct super_block *sb); -- cgit v0.10.2 From 832dd3c17f7829fe8e4c257531d6c5c9e19bd7ac Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:34:06 -0700 Subject: drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control Every usage of PCH_PP_CONTROL sets the PANEL_UNLOCK_REGS value to ensure that writes will be respected, move this to a common function to make the driver cleaner. No functional changes. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7259034..efe5f9e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -906,6 +906,19 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp) msleep(delay); } +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv) +{ + u32 control = I915_READ(PCH_PP_CONTROL); + + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + return control; +} + static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; @@ -926,9 +939,7 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) } ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -951,9 +962,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1012,9 +1021,7 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) return; ironlake_wait_panel_off(intel_dp); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1049,9 +1056,7 @@ static void ironlake_edp_panel_off(struct drm_encoder *encoder) if (!is_edp(intel_dp)) return; - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ @@ -1098,9 +1103,7 @@ static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) * allowing it to appear. */ msleep(intel_dp->backlight_on_delay); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); @@ -1116,9 +1119,7 @@ static void ironlake_edp_backlight_off(struct intel_dp *intel_dp) return; DRM_DEBUG_KMS("\n"); - pp = I915_READ(PCH_PP_CONTROL); - pp &= ~PANEL_UNLOCK_MASK; - pp |= PANEL_UNLOCK_REGS; + pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_BLC_ENABLE; I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); -- cgit v0.10.2 From 93f62dad5ffe0962d83772fd16c0c1a9dd69767d Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:45:03 -0700 Subject: drm/i915: Remove link_status field from intel_dp structure No persistent data was ever stored here, so link_status is instead allocated on the stack as needed. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index efe5f9e..2c0c482 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -58,7 +58,6 @@ struct intel_dp { struct i2c_algo_dp_aux_data algo; bool is_pch_edp; uint8_t train_set[4]; - uint8_t link_status[DP_LINK_STATUS_SIZE]; int panel_power_up_delay; int panel_power_down_delay; int panel_power_cycle_delay; @@ -1285,11 +1284,11 @@ intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, * link status information */ static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { return intel_dp_aux_native_read_retry(intel_dp, DP_LANE0_1_STATUS, - intel_dp->link_status, + link_status, DP_LINK_STATUS_SIZE); } @@ -1301,27 +1300,25 @@ intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], } static uint8_t -intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_voltage(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; } static uint8_t -intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], +intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2], int lane) { - int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); int s = ((lane & 1) ? DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = adjust_request[lane>>1]; return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; } @@ -1362,15 +1359,18 @@ intel_dp_pre_emphasis_max(uint8_t voltage_swing) } static void -intel_get_adjust_train(struct intel_dp *intel_dp) +intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { + struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; + uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); + int voltage_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { - uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane); - uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane); if (this_v > v) v = this_v; @@ -1389,7 +1389,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(uint8_t train_set, int lane_count) +intel_dp_signal_levels(uint8_t train_set) { uint32_t signal_levels = 0; @@ -1458,9 +1458,8 @@ static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) { - int i = DP_LANE0_1_STATUS + (lane >> 1); int s = (lane & 1) * 4; - uint8_t l = intel_dp_link_status(link_status, i); + uint8_t l = link_status[lane>>1]; return (l >> s) & 0xf; } @@ -1485,18 +1484,18 @@ intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count DP_LANE_CHANNEL_EQ_DONE|\ DP_LANE_SYMBOL_LOCKED) static bool -intel_channel_eq_ok(struct intel_dp *intel_dp) +intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { uint8_t lane_align; uint8_t lane_status; int lane; - lane_align = intel_dp_link_status(intel_dp->link_status, + lane_align = intel_dp_link_status(link_status, DP_LANE_ALIGN_STATUS_UPDATED); if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) return false; for (lane = 0; lane < intel_dp->lane_count; lane++) { - lane_status = intel_get_lane_status(intel_dp->link_status, lane); + lane_status = intel_get_lane_status(link_status, lane); if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) return false; } @@ -1569,12 +1568,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; if (IS_GEN6(dev) && is_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1590,10 +1591,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Set training pattern 1 */ udelay(100); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_ERROR("failed to get link status\n"); break; + } - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("clock recovery OK\n"); clock_recovery = true; break; } @@ -1615,7 +1619,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); } intel_dp->DP = DP; @@ -1638,6 +1642,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint32_t signal_levels; + uint8_t link_status[DP_LINK_STATUS_SIZE]; if (cr_tries > 5) { DRM_ERROR("failed to train DP, aborting\n"); @@ -1649,7 +1654,8 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); + DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1665,17 +1671,17 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; udelay(400); - if (!intel_dp_get_link_status(intel_dp)) + if (!intel_dp_get_link_status(intel_dp, link_status)) break; /* Make sure clock is still ok */ - if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) { intel_dp_start_link_train(intel_dp); cr_tries++; continue; } - if (intel_channel_eq_ok(intel_dp)) { + if (intel_channel_eq_ok(intel_dp, link_status)) { channel_eq = true; break; } @@ -1690,7 +1696,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) } /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); + intel_get_adjust_train(intel_dp, link_status); ++tries; } @@ -1822,6 +1828,7 @@ static void intel_dp_check_link_status(struct intel_dp *intel_dp) { u8 sink_irq_vector; + u8 link_status[DP_LINK_STATUS_SIZE]; if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1830,7 +1837,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp)) { + if (!intel_dp_get_link_status(intel_dp, link_status)) { intel_dp_link_down(intel_dp); return; } @@ -1855,7 +1862,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } - if (!intel_channel_eq_ok(intel_dp)) { + if (!intel_channel_eq_ok(intel_dp, link_status)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", drm_get_encoder_name(&intel_dp->base.base)); intel_dp_start_link_train(intel_dp); -- cgit v0.10.2 From 417e822deee1d2bcd8a8a60660c40a0903713f2b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:54:11 -0700 Subject: drm/i915: Treat PCH eDP like DP in most places PCH eDP has many of the same needs as regular PCH DP connections, including the DP_CTl bit settings, the TRANS_DP_CTL register. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 591eb0ed..e77a863 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c0c482..d1eabd4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { lane_count = intel_dp->lane_count; break; - } else if (is_edp(intel_dp)) { + } else if (is_cpu_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; break; } @@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, ironlake_edp_pll_off(encoder); } - intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - intel_dp->DP |= intel_dp->color_range; + /* + * There are three kinds of DP registers: + * + * IBX PCH + * CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; + /* Handle DP bits in common between all three register formats */ + + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; switch (intel_dp->lane_count) { case 1: @@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); intel_dp->link_configuration[0] = intel_dp->link_bw; intel_dp->link_configuration[1] = intel_dp->lane_count; intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; - /* * Check for DPCD version > 1.1 and enhanced framing support */ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; + if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } @@ -1341,6 +1368,7 @@ static char *link_train_names[] = { * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ #define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 +#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t intel_dp_pre_emphasis_max(uint8_t voltage_swing) @@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + voltage_max = I830_DP_VOLTAGE_MAX_CPT; + else + voltage_max = I830_DP_VOLTAGE_MAX; + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; if (p >= intel_dp_pre_emphasis_max(v)) p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; @@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { + + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_edp(intel_dp)) { + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + if (is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } if (!HAS_PCH_CPT(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; } -- cgit v0.10.2 From 99ea7127a30bda29354e1ed3a75d80d5f9cfc2a7 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 19:57:50 -0700 Subject: drm/i915: Let panel power sequencing hardware do its job The panel power sequencing hardware tracks the stages of panel power sequencing and signals when the panel is completely on or off. Instead of blindly assuming the panel timings will work, poll the panel power status register until it shows the correct values. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index a34e866..b080cc8 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1553,12 +1553,21 @@ */ #define PP_READY (1 << 30) #define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 +#define PP_SEQUENCE_POWER_UP (1 << 28) +#define PP_SEQUENCE_POWER_DOWN (2 << 28) +#define PP_SEQUENCE_MASK (3 << 28) +#define PP_SEQUENCE_SHIFT 28 #define PP_CYCLE_DELAY_ACTIVE (1 << 27) -#define PP_SEQUENCE_STATE_ON_IDLE (1 << 3) #define PP_SEQUENCE_STATE_MASK 0x0000000f +#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) +#define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) +#define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) +#define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) +#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) +#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) +#define PP_SEQUENCE_STATE_RESET (0xf << 0) #define PP_CONTROL 0x61204 #define POWER_TARGET_ON (1 << 0) #define PP_ON_DELAYS 0x61208 diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d1eabd4..5610610 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -66,7 +66,6 @@ struct intel_dp { struct drm_display_mode *panel_fixed_mode; /* for eDP */ struct delayed_work panel_vdd_work; bool want_panel_vdd; - unsigned long panel_off_jiffies; }; /** @@ -906,32 +905,53 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } } -static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void ironlake_wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) { - unsigned long off_time; - unsigned long delay; + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; - DRM_DEBUG_KMS("Wait for panel power off time\n"); + DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", + mask, value, + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); - if (ironlake_edp_have_panel_power(intel_dp) || - ironlake_edp_have_panel_vdd(intel_dp)) - { - DRM_DEBUG_KMS("Panel still on, no delay needed\n"); - return; + if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) { + DRM_ERROR("Panel status timeout: status %08x control %08x\n", + I915_READ(PCH_PP_STATUS), + I915_READ(PCH_PP_CONTROL)); } +} - off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay); - if (time_after(jiffies, off_time)) { - DRM_DEBUG_KMS("Time already passed"); - return; - } - delay = jiffies_to_msecs(off_time - jiffies); - if (delay > intel_dp->panel_power_down_delay) - delay = intel_dp->panel_power_down_delay; - DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay); - msleep(delay); +static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power on\n"); + ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); } +static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power off time\n"); + ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + DRM_DEBUG_KMS("Wait for panel power cycle\n"); + ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + + /* Read the current pp_control value, unlocking the register if it * is locked */ @@ -959,12 +979,15 @@ static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) "eDP VDD already requested on\n"); intel_dp->want_panel_vdd = true; + if (ironlake_edp_have_panel_vdd(intel_dp)) { DRM_DEBUG_KMS("eDP VDD already on\n"); return; } - ironlake_wait_panel_off(intel_dp); + if (!ironlake_edp_have_panel_power(intel_dp)) + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); pp |= EDP_FORCE_VDD; I915_WRITE(PCH_PP_CONTROL, pp); @@ -996,7 +1019,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) /* Make sure sequencer is idle before allowing subsequent activity */ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n", I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL)); - intel_dp->panel_off_jiffies = jiffies; + + msleep(intel_dp->panel_power_down_delay); } } @@ -1034,21 +1058,25 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) } } -/* Returns true if the panel was already on when called */ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE; + u32 pp; if (!is_edp(intel_dp)) return; - if (ironlake_edp_have_panel_power(intel_dp)) + + DRM_DEBUG_KMS("Turn eDP power on\n"); + + if (ironlake_edp_have_panel_power(intel_dp)) { + DRM_DEBUG_KMS("eDP power already on\n"); return; + } - ironlake_wait_panel_off(intel_dp); - pp = ironlake_get_pp_control(dev_priv); + ironlake_wait_panel_power_cycle(intel_dp); + pp = ironlake_get_pp_control(dev_priv); if (IS_GEN5(dev)) { /* ILK workaround: disable reset around power sequence */ pp &= ~PANEL_POWER_RESET; @@ -1057,13 +1085,13 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } pp |= POWER_TARGET_ON; + if (!IS_GEN5(dev)) + pp |= PANEL_POWER_RESET; + I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask, - 5000)) - DRM_ERROR("panel on wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + ironlake_wait_panel_on(intel_dp); if (IS_GEN5(dev)) { pp |= PANEL_POWER_RESET; /* restore panel reset bit */ @@ -1072,44 +1100,25 @@ static void ironlake_edp_panel_on(struct intel_dp *intel_dp) } } -static void ironlake_edp_panel_off(struct drm_encoder *encoder) +static void ironlake_edp_panel_off(struct intel_dp *intel_dp) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; + struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK | - PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK; + u32 pp; if (!is_edp(intel_dp)) return; - pp = ironlake_get_pp_control(dev_priv); - if (IS_GEN5(dev)) { - /* ILK workaround: disable reset around power sequence */ - pp &= ~PANEL_POWER_RESET; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } - - intel_dp->panel_off_jiffies = jiffies; + DRM_DEBUG_KMS("Turn eDP power off\n"); - if (IS_GEN5(dev)) { - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - pp &= ~POWER_TARGET_ON; - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - msleep(intel_dp->panel_power_cycle_delay); + WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n"); - if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000)) - DRM_ERROR("panel off wait timed out: 0x%08x\n", - I915_READ(PCH_PP_STATUS)); + pp = ironlake_get_pp_control(dev_priv); + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); + I915_WRITE(PCH_PP_CONTROL, pp); + POSTING_READ(PCH_PP_CONTROL); - pp |= PANEL_POWER_RESET; /* restore panel reset bit */ - I915_WRITE(PCH_PP_CONTROL, pp); - POSTING_READ(PCH_PP_CONTROL); - } + ironlake_wait_panel_off(intel_dp); } static void ironlake_edp_backlight_on(struct intel_dp *intel_dp) @@ -1223,7 +1232,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder) */ ironlake_edp_backlight_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1237,7 +1246,6 @@ static void intel_dp_commit(struct drm_encoder *encoder) intel_dp_start_link_train(intel_dp); ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); @@ -1261,7 +1269,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(encoder); + ironlake_edp_panel_off(intel_dp); if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); @@ -2398,11 +2406,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay; - ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); + if (ret) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) dev_priv->no_aux_handshake = -- cgit v0.10.2 From 21264c638b4f9179655a39436d0340bd0d4ab1de Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:25:21 -0700 Subject: drm/i915: Make DP prepare/commit consistent with DP dpms Make sure the sequence of operations in all three functions makes sense: 1) The backlight must be off unless the screen is running 2) The link must be running to turn the eDP panel on/off 3) The CPU eDP PLL must be running until everything is off Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5610610..8e37fdd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1222,17 +1222,18 @@ static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + /* Wake up the sink first */ ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_link_down(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, false); /* Make sure the panel is off before trying to * change the mode */ - ironlake_edp_backlight_off(intel_dp); - intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1264,16 +1265,20 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) uint32_t dp_reg = I915_READ(intel_dp->output_reg); if (mode != DRM_MODE_DPMS_ON) { + ironlake_edp_backlight_off(intel_dp); + ironlake_edp_panel_off(intel_dp); + ironlake_edp_panel_vdd_on(intel_dp); - if (is_edp(intel_dp)) - ironlake_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); - ironlake_edp_panel_off(intel_dp); - if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) - ironlake_edp_pll_off(encoder); ironlake_edp_panel_vdd_off(intel_dp, false); + + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_off(encoder); } else { + if (is_cpu_edp(intel_dp)) + ironlake_edp_pll_on(encoder); + ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { @@ -1281,7 +1286,6 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); - ironlake_edp_backlight_on(intel_dp); } else ironlake_edp_panel_vdd_off(intel_dp, false); ironlake_edp_backlight_on(intel_dp); -- cgit v0.10.2 From cdb0e95bf571dccc1f75fef9bdad21b167ef0b37 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:00:06 -0700 Subject: drm/i915: Try harder during dp pattern 1 link training Instead of going through the sequence just once, run through the whole set up to 5 times to see if something can work. This isn't part of the DP spec, but the BIOS seems to do it, and given that link training failure is so bad, it seems reasonable to follow suit. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8e37fdd..7101b8b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1581,7 +1581,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int i; uint8_t voltage; bool clock_recovery = false; - int tries; + int voltage_tries, loop_tries; u32 reg; uint32_t DP = intel_dp->DP; @@ -1608,7 +1608,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP &= ~DP_LINK_TRAIN_MASK; memset(intel_dp->train_set, 0, 4); voltage = 0xff; - tries = 0; + voltage_tries = 0; + loop_tries = 0; clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ @@ -1651,16 +1652,26 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; - if (i == intel_dp->lane_count) - break; + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_DEBUG_KMS("too many full retries, give up\n"); + break; + } + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } /* Check to see if we've tried the same voltage 5 times */ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) + ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); break; + } } else - tries = 0; + voltage_tries = 0; voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ -- cgit v0.10.2 From f2e8b18af95358cf5407bf263cba04fc4c379123 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 1 Nov 2011 20:01:35 -0700 Subject: drm/i915: Remove trailing white space Found a couple of bare tabs in intel_dp.c Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7101b8b..7bdf77e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1042,7 +1042,7 @@ static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd); WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); - + intel_dp->want_panel_vdd = false; if (sync) { @@ -2388,7 +2388,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> PANEL_LIGHT_ON_DELAY_SHIFT; - + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> PANEL_LIGHT_OFF_DELAY_SHIFT; -- cgit v0.10.2 From b34f1f0931575bf1e1483472a5202b8247fa9b10 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 10:17:59 -0700 Subject: drm/i915: Initiate DP link training only on the lanes we'll be using Limit the link training setting command to the lanes needed for the current mode. It seems vaguely possible that a monitor will try to train the other lanes and fail in some way, so this seems like the safer plan. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7bdf77e..8c3819b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1564,8 +1564,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count) return false; return true; -- cgit v0.10.2 From 9a10f401a401ca69c6537641c8fc0d6b57b5aee8 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 2 Nov 2011 13:03:47 -0700 Subject: drm/i915: Use DPCD value for max DP lanes. The BIOS VBT value for an eDP panel has been shown to be incorrect on one machine, and we haven't found any machines where the DPCD value was wrong, so we'll use the DPCD value everywhere. Signed-off-by: Keith Packard Reviewed-by: Adam Jackson Reviewed-by: Jesse Barnes diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8c3819b..ec28aeb 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -154,16 +154,12 @@ intel_edp_link_config(struct intel_encoder *intel_encoder, static int intel_dp_max_lane_count(struct intel_dp *intel_dp) { - int max_lane_count = 4; - - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { - max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; - switch (max_lane_count) { - case 1: case 2: case 4: - break; - default: - max_lane_count = 4; - } + int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; } return max_lane_count; } @@ -765,12 +761,11 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) + { lane_count = intel_dp->lane_count; break; - } else if (is_cpu_edp(intel_dp)) { - lane_count = dev_priv->edp.lanes; - break; } } -- cgit v0.10.2 From ba28c9aae26ef7f3651eef6835fae30a979f88ba Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:38 +0000 Subject: powerpc: Revert show_regs() define for readability We had an existing ifdef for 4xx & BOOKE processors that got changed to CONFIG_PPC_ADV_DEBUG_REGS. The define has nothing to do with CONFIG_PPC_ADV_DEBUG_REGS. The define really should be: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) and not #ifdef CONFIG_PPC_ADV_DEBUG_REGS Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 9054ca9..ad3612a 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -657,7 +657,7 @@ void show_regs(struct pt_regs * regs) if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) printk("CFAR: "REG"\n", regs->orig_gpr3); if (trap == 0x300 || trap == 0x600) -#ifdef CONFIG_PPC_ADV_DEBUG_REGS +#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr); #else printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr); -- cgit v0.10.2 From b95bc2191412f5ecf2781c966110a13fa82a80d3 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:39 +0000 Subject: powerpc: Remove extraneous CONFIG_PPC_ADV_DEBUG_REGS define All of DebugException is already protected by CONFIG_PPC_ADV_DEBUG_REGS there is no need to have another such ifdef inside the function. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 4e59082..5459d14 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1298,14 +1298,12 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) if (user_mode(regs)) { current->thread.dbcr0 &= ~DBCR0_IC; -#ifdef CONFIG_PPC_ADV_DEBUG_REGS if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM bit is off */ current->thread.dbcr0 &= ~DBCR0_IDM; -#endif } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); -- cgit v0.10.2 From 187b9f2aa769198daa7cf8054abb65a08b8d8b47 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 6 Oct 2011 02:53:40 +0000 Subject: powerpc/book3e-64: Fix debug support for userspace With the introduction of CONFIG_PPC_ADV_DEBUG_REGS user space debug is broken on Book-E 64-bit parts that support delayed debug events. When switch_booke_debug_regs() sets DBCR0 we'll start getting debug events as MSR_DE is also set and we aren't able to handle debug events from kernel space. We can remove the hack that always enables MSR_DE and loads up DBCR0 and just utilize switch_booke_debug_regs() to get user space debug working again. We still need to handle critical/debug exception stacks & proper save/restore of state for those exception levles to support debug events from kernel space like we have on 32-bit. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 28cdbd9..03c48e8 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -31,7 +31,7 @@ #define MSR_ MSR_ME | MSR_CE #define MSR_KERNEL MSR_ | MSR_64BIT -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE #define MSR_USER64 MSR_USER32 | MSR_64BIT #elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ad3612a..6457574 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -486,28 +486,6 @@ struct task_struct *__switch_to(struct task_struct *prev, new_thread = &new->thread; old_thread = ¤t->thread; -#if defined(CONFIG_PPC_BOOK3E_64) - /* XXX Current Book3E code doesn't deal with kernel side DBCR0, - * we always hold the user values, so we set it now. - * - * However, we ensure the kernel MSR:DE is appropriately cleared too - * to avoid spurrious single step exceptions in the kernel. - * - * This will have to change to merge with the ppc32 code at some point, - * but I don't like much what ppc32 is doing today so there's some - * thinking needed there - */ - if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) { - u32 dbcr0; - - mtmsr(mfmsr() & ~MSR_DE); - isync(); - dbcr0 = mfspr(SPRN_DBCR0); - dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0; - mtspr(SPRN_DBCR0, dbcr0); - } -#endif /* CONFIG_PPC64_BOOK3E */ - #ifdef CONFIG_PPC64 /* * Collect processor utilization data per process -- cgit v0.10.2 From a9a8f77ac72d6dd3c92ea268291678836f77681c Mon Sep 17 00:00:00 2001 From: Kyle Moffett Date: Mon, 7 Nov 2011 13:30:43 +0000 Subject: powerpc: Remove buggy 9-year-old test for binutils < 2.12.1 Recent binutils refuses to assemble AltiVec opcodes when in e500/SPE mode, as some of those opcodes alias the "SPE" instructions. This triggers an ancient binutils version check even when building a kernel with CONFIG_ALTIVEC disabled. In theory, the check could be conditionalized on CONFIG_ALTIVEC, but in practice it has long outlived its utility. It is virtually impossible to find binutils older than 2.12.1 (released 2002) in the wild anymore. Even ancient RedHat Enterprise Linux 4 has binutils-2.14. To fix the kernel build when done natively on e500 systems with this new binutils, the test is simply removed. Signed-off-by: Kyle Moffett Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 57af16e..70ba0c0 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -255,12 +255,6 @@ checkbin: echo 'disable kernel modules' ; \ false ; \ fi - @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \ - echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \ - echo 'correctly with old versions of binutils.' ; \ - echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \ - false ; \ - fi CLEAN_FILES += $(TOUT) -- cgit v0.10.2 From b97021f85517552ea8a0d2c1680c1ee4beab6d14 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2011 17:11:27 +0000 Subject: powerpc: Fix atomic_xxx_return barrier semantics The Documentation/memory-barriers.txt document requires that atomic operations that return a value act as a memory barrier both before and after the actual atomic operation. Our current implementation doesn't guarantee this. More specifically, while a load following the isync can not be issued before stwcx. has completed, that completion doesn't architecturally means that the result of stwcx. is visible to other processors (or any previous stores for that matter) (typically, the other processors L1 caches can still hold the old value). This has caused an actual crash in RCU torture testing on Power 7 This fixes it by changing those atomic ops to use new macros instead of RELEASE/ACQUIRE barriers, called ATOMIC_ENTRY and ATMOIC_EXIT barriers, which are then defined respectively to lwsync and sync. I haven't had a chance to measure the performance impact (or rather what I measured with kernel compiles is in the noise, I yet have to find a more precise benchmark) Signed-off-by: Benjamin Herrenschmidt Acked-by: Paul E. McKenney diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index e2a4c26..02e41b5 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%2 # atomic_add_return\n\ add %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%2 # atomic_sub_return\n\ subf %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_inc_return\n\ addic %0,%0,1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_dec_return\n\ addic %0,%0,-1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -194,7 +194,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) int t; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # __atomic_add_unless\n\ cmpw 0,%0,%3 \n\ beq- 2f \n\ @@ -202,7 +202,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) PPC405_ERR77(0,%2) " stwcx. %0,0,%1 \n\ bne- 1b \n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) @@ -226,7 +226,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) int t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ cmpwi %0,1\n\ addi %0,%0,-1\n\ @@ -234,7 +234,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "\n\ 2:" : "=&b" (t) : "r" (&v->counter) @@ -285,12 +285,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%2 # atomic64_add_return\n\ add %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -319,12 +319,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%2 # atomic64_sub_return\n\ subf %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -351,12 +351,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_inc_return\n\ addic %0,%0,1\n\ stdcx. %0,0,%1 \n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -393,12 +393,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_return\n\ addic %0,%0,-1\n\ stdcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -418,13 +418,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v) long t; __asm__ __volatile__( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ addic. %0,%0,-1\n\ blt- 2f\n\ stdcx. %0,0,%1\n\ bne- 1b" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "\n\ 2:" : "=&r" (t) : "r" (&v->counter) @@ -450,14 +450,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) long t; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%1 # __atomic_add_unless\n\ cmpd 0,%0,%3 \n\ beq- 2f \n\ add %0,%2,%0 \n" " stdcx. %0,0,%1 \n\ bne- 1b \n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index e137afc..efdc926 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -124,14 +124,14 @@ static __inline__ unsigned long fn( \ return (old & mask); \ } -DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) DEFINE_TESTOP(test_and_set_bits_lock, or, "", PPC_ACQUIRE_BARRIER, 1) -DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) -DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER, - PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) +DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h index c94e4a3..2a9cf84 100644 --- a/arch/powerpc/include/asm/futex.h +++ b/arch/powerpc/include/asm/futex.h @@ -11,12 +11,13 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ __asm__ __volatile ( \ - PPC_RELEASE_BARRIER \ + PPC_ATOMIC_ENTRY_BARRIER \ "1: lwarx %0,0,%2\n" \ insn \ PPC405_ERR77(0, %2) \ "2: stwcx. %1,0,%2\n" \ "bne- 1b\n" \ + PPC_ATOMIC_EXIT_BARRIER \ "li %1,0\n" \ "3: .section .fixup,\"ax\"\n" \ "4: li %1,%3\n" \ @@ -92,14 +93,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; __asm__ __volatile__ ( - PPC_RELEASE_BARRIER + PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\ cmpw 0,%1,%4\n\ bne- 3f\n" PPC405_ERR77(0,%3) "2: stwcx. %5,0,%3\n\ bne- 1b\n" - PPC_ACQUIRE_BARRIER + PPC_ATOMIC_EXIT_BARRIER "3: .section .fixup,\"ax\"\n\ 4: li %0,%6\n\ b 3b\n\ diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h index 87878c6..e682a71 100644 --- a/arch/powerpc/include/asm/synch.h +++ b/arch/powerpc/include/asm/synch.h @@ -42,11 +42,15 @@ static inline void isync(void) START_LWSYNC_SECTION(97); \ isync; \ MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup); -#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) -#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" +#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) +#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" +#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n" +#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n" #else #define PPC_ACQUIRE_BARRIER #define PPC_RELEASE_BARRIER +#define PPC_ATOMIC_ENTRY_BARRIER +#define PPC_ATOMIC_EXIT_BARRIER #endif #endif /* __KERNEL__ */ -- cgit v0.10.2 From a313f4c55d4952f2105fe33a4957ed858e998359 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 8 Nov 2011 04:51:19 +0000 Subject: powerpc/signal32: Fix sigset_t conversion when copying to user On PPC64, put_sigset_t converts a sigset_t to a compat_sigset_t before copying it to userspace. There is a typo in the case that we have 4 words to copy, meaning that we corrupt the compat_sigset_t. It appears that _NSIG_WORDS can't be greater than 2 at the moment so this code is probably always optimised away anyway. Signed-off-by: Will Deacon Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 78b76dc..836a5a1 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -97,7 +97,7 @@ static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) compat_sigset_t cset; switch (_NSIG_WORDS) { - case 4: cset.sig[5] = set->sig[3] & 0xffffffffull; + case 4: cset.sig[6] = set->sig[3] & 0xffffffffull; cset.sig[7] = set->sig[3] >> 32; case 3: cset.sig[4] = set->sig[2] & 0xffffffffull; cset.sig[5] = set->sig[2] >> 32; -- cgit v0.10.2 From ff956135008bca99b5e38f48f0d10a2c04fef2d6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 15 Nov 2011 21:00:56 -0600 Subject: [libata] ahci_platform: fix DT probing The change in commit 904c04feaf13ed "ahci_platform: Add the board_ids..." doesn't work for the DT probing case as platform_get_device_id returns NULL. Pick the default ahci_port_info in this case. Signed-off-by: Rob Herring Acked-by: Anton Vorontsov Cc: Richard Zhu Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index ec55595..43b8758 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -67,7 +67,7 @@ static int __init ahci_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); - struct ata_port_info pi = ahci_port_info[id->driver_data]; + struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ahci_host_priv *hpriv; struct ata_host *host; -- cgit v0.10.2 From aab9440453d19c1885fa391d4aafd7705f316247 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 13 Nov 2011 01:30:56 +0400 Subject: libata: fix build without BMDMA fix these errors: drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function 'ata_pci_bmdma_prepare_host' drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt' undeclared (first use in this function) Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 63d5327..4cadfa2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2533,10 +2533,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, if (rc) goto out; +#ifdef CONFIG_ATA_BMDMA if (bmdma) /* prepare and activate BMDMA host */ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); else +#endif /* prepare and activate SFF host */ rc = ata_pci_sff_prepare_host(pdev, ppi, &host); if (rc) @@ -2544,10 +2546,12 @@ static int ata_pci_init_one(struct pci_dev *pdev, host->private_data = host_priv; host->flags |= hflags; +#ifdef CONFIG_ATA_BMDMA if (bmdma) { pci_set_master(pdev); rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); } else +#endif rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) -- cgit v0.10.2 From bbc1754639f771cd2b515fed39b977549b373034 Mon Sep 17 00:00:00 2001 From: Francesco Virlinzi Date: Wed, 16 Nov 2011 21:57:58 +0000 Subject: stmmac: use mdelay on timeout of sw reset This patch uses an mdelay to manage the timeout on sw reset to be independant of cpu_clk. Signed-off-by: Francesco Virlinzi Reviewed-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index da66ac5..4d5402a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -39,10 +39,11 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, /* DMA SW reset */ value |= DMA_BUS_MODE_SFT_RESET; writel(value, ioaddr + DMA_BUS_MODE); - limit = 15000; + limit = 10; while (limit--) { if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) break; + mdelay(10); } if (limit < 0) return -EBUSY; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c index 627f656..bc17fd0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c @@ -41,10 +41,11 @@ static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, /* DMA SW reset */ value |= DMA_BUS_MODE_SFT_RESET; writel(value, ioaddr + DMA_BUS_MODE); - limit = 15000; + limit = 10; while (limit--) { if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) break; + mdelay(10); } if (limit < 0) return -EBUSY; -- cgit v0.10.2 From c5b9b4e4b9076089fe7f9d4f5d1f2bba776646d2 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 16 Nov 2011 21:57:59 +0000 Subject: stmmac: fix advertising 1000Base capabilties for non GMII iface This patch fixes the way to stop the 1000Base advertising capabilties for non GMII interfaces. Signed-off-by: Srinivas Kandagatla Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 20546bb..e079762 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -321,12 +321,10 @@ static int stmmac_init_phy(struct net_device *dev) } /* Stop Advertising 1000BASE Capability if interface is not GMII */ - if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) || - (interface == PHY_INTERFACE_MODE_RMII))) { - phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | - SUPPORTED_Asym_Pause); - phydev->advertising = phydev->supported; - } + if ((interface == PHY_INTERFACE_MODE_MII) || + (interface == PHY_INTERFACE_MODE_RMII)) + phydev->advertising &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); /* * Broken HW is sometimes missing the pull-up resistor on the -- cgit v0.10.2 From 19e30c14371f7afd38d1d35a693b96423a4db144 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 16 Nov 2011 21:58:00 +0000 Subject: stmmac: parameters auto-tuning through HW cap reg New GMAC devices (newer than the databook 3.50a) have the HW capability register that provides which features are actually supported by the hardware. On old devices many information have to be passed through the platform, for example: enhanced descriptor structure, TX COE etc. These are mandatory to properly configure the driver. This remains still valid because the driver has to support old Synopsys devices but now it's also able to override them using the values from the HW capability register if supported. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 9bafa6c..a140a8f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -72,7 +72,6 @@ struct stmmac_priv { spinlock_t lock; spinlock_t tx_lock; int wolopts; - int wolenabled; int wol_irq; #ifdef CONFIG_STMMAC_TIMER struct stmmac_timer *tm; @@ -80,6 +79,7 @@ struct stmmac_priv { struct plat_stmmacenet_data *plat; struct stmmac_counters mmc; struct dma_features dma_cap; + int hw_cap_support; }; extern int stmmac_mdio_unregister(struct net_device *ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index e8eff09..0395f9e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -430,6 +430,12 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct stmmac_priv *priv = netdev_priv(dev); u32 support = WAKE_MAGIC | WAKE_UCAST; + /* By default almost all GMAC devices support the WoL via + * magic frame but we can disable it if the HW capability + * register shows no support for pmt_magic_frame. */ + if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame)) + wol->wolopts &= ~WAKE_MAGIC; + if (!device_can_wakeup(priv->device)) return -EINVAL; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e079762..7f3ffd3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -805,8 +805,29 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) return 0; } -/* New GMAC chips support a new register to indicate the - * presence of the optional feature/functions. +/** + * stmmac_selec_desc_mode + * @dev : device pointer + * Description: select the Enhanced/Alternate or Normal descriptors */ +static void stmmac_selec_desc_mode(struct stmmac_priv *priv) +{ + if (priv->plat->enh_desc) { + pr_info(" Enhanced/Alternate descriptors\n"); + priv->hw->desc = &enh_desc_ops; + } else { + pr_info(" Normal descriptors\n"); + priv->hw->desc = &ndesc_ops; + } +} + +/** + * stmmac_get_hw_features + * @priv : private device pointer + * Description: + * new GMAC chip generations have a new register to indicate the + * presence of the optional feature/functions. + * This can be also used to override the value passed through the + * platform and necessary for old MAC10/100 and GMAC chips. */ static int stmmac_get_hw_features(struct stmmac_priv *priv) { @@ -827,7 +848,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; priv->dma_cap.pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; - /*MMC*/ + /* MMC */ priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11; /* IEEE 1588-2002*/ priv->dma_cap.time_stamp = @@ -855,8 +876,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) priv->dma_cap.enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; - } else - pr_debug("\tNo HW DMA feature register supported"); + } return hw_cap; } @@ -911,6 +931,44 @@ static int stmmac_open(struct net_device *dev) goto open_error; } + stmmac_get_synopsys_id(priv); + + priv->hw_cap_support = stmmac_get_hw_features(priv); + + if (priv->hw_cap_support) { + pr_info(" Support DMA HW capability register"); + + /* We can override some gmac/dma configuration fields: e.g. + * enh_desc, tx_coe (e.g. that are passed through the + * platform) with the values from the HW capability + * register (if supported). + */ + priv->plat->enh_desc = priv->dma_cap.enh_desc; + priv->plat->tx_coe = priv->dma_cap.tx_coe; + priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up; + + /* By default disable wol on magic frame if not supported */ + if (!priv->dma_cap.pmt_magic_frame) + priv->wolopts &= ~WAKE_MAGIC; + + } else + pr_info(" No HW DMA feature register supported"); + + /* Select the enhnaced/normal descriptor structures */ + stmmac_selec_desc_mode(priv); + + /* PMT module is not integrated in all the MAC devices. */ + if (priv->plat->pmt) { + pr_info(" Remote wake-up capable\n"); + device_set_wakeup_capable(priv->device, 1); + } + + priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); + if (priv->rx_coe) + pr_info(" Checksum Offload Engine supported\n"); + if (priv->plat->tx_coe) + pr_info(" Checksum insertion supported\n"); + /* Create and initialize the TX/RX descriptors chains. */ priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); @@ -933,15 +991,6 @@ static int stmmac_open(struct net_device *dev) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); - stmmac_get_synopsys_id(priv); - - stmmac_get_hw_features(priv); - - priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); - if (priv->rx_coe) - pr_info("stmmac: Rx Checksum Offload Engine supported\n"); - if (priv->plat->tx_coe) - pr_info("\tTX Checksum insertion supported\n"); netdev_update_features(dev); /* Request the IRQ lines */ @@ -1556,7 +1605,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v) struct net_device *dev = seq->private; struct stmmac_priv *priv = netdev_priv(dev); - if (!stmmac_get_hw_features(priv)) { + if (!priv->hw_cap_support) { seq_printf(seq, "DMA HW features not supported\n"); return 0; } @@ -1764,12 +1813,6 @@ static int stmmac_mac_device_setup(struct net_device *dev) if (!device) return -ENOMEM; - if (priv->plat->enh_desc) { - device->desc = &enh_desc_ops; - pr_info("\tEnhanced descriptor structure\n"); - } else - device->desc = &ndesc_ops; - priv->hw = device; priv->hw->ring = &ring_mode_ops; @@ -1843,11 +1886,6 @@ static int stmmac_dvr_probe(struct platform_device *pdev) priv->ioaddr = addr; - /* PMT module is not integrated in all the MAC devices. */ - if (plat_dat->pmt) { - pr_info("\tPMT module supported\n"); - device_set_wakeup_capable(&pdev->dev, 1); - } /* * On some platforms e.g. SPEAr the wake up irq differs from the mac irq * The external wake up irq can be passed through the platform code @@ -1860,7 +1898,6 @@ static int stmmac_dvr_probe(struct platform_device *pdev) if (priv->wol_irq == -ENXIO) priv->wol_irq = ndev->irq; - platform_set_drvdata(pdev, ndev); /* Set the I/O base addr */ @@ -1873,7 +1910,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev) goto out_free_ndev; } - /* MAC HW revice detection */ + /* MAC HW device detection */ ret = stmmac_mac_device_setup(ndev); if (ret < 0) goto out_plat_exit; -- cgit v0.10.2 From 989508ba60da6dce79f8aaee1be6c092fd4c67f8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 16 Nov 2011 21:58:01 +0000 Subject: stmmac: remove spin_lock in stmmac_ioctl. This patch removes un-needed spin_lock in stmmac_ioctl while reading and writing mdio registers. While holding spin_lock the code must be atomic, which is not true in this case as both mdiobus_read and writes have mutex locks. Without this patch reading mdio registers via mii-tool results in below BUG: mii-tool -vvv eth0" Using SIOCGMIIPHY=0x8947 BUG: sleeping function called from invalid context at kernel/mutex.c:287 in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool 2 locks held by mii-tool/614: #0: (rtnl_mutex){......}, at: [] dev_ioctl+0x550/0x674 #1: (&priv->lock){......}, at: [] stmmac_ioctl+0x4c/0x78 [] (unwind_backtrace+0x0/0xcc) from [] (mutex_lock_nested+0x24/0x35c) [] (mutex_lock_nested+0x24/0x35c) from [] (mdiobus_read+0x44/0x70) [] (mdiobus_read+0x44/0x70) from [] (phy_mii_ioctl+0x4c/0x138) [] (phy_mii_ioctl+0x4c/0x138) from [] (stmmac_ioctl+0x5c/0x78) [] (stmmac_ioctl+0x5c/0x78) from [] (dev_ifsioc+0x2a4/0x2c8) [] (dev_ifsioc+0x2a4/0x2c8) from [] (dev_ioctl+0x560/0x674) [] (dev_ioctl+0x560/0x674) from [] (vfs_ioctl+0x2c/0x8c) [] (vfs_ioctl+0x2c/0x8c) from [] (do_vfs_ioctl+0x530/0x578) [] (do_vfs_ioctl+0x530/0x578) from [] (sys_ioctl+0x34/0x54) [] (sys_ioctl+0x34/0x54) from [] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Srinivas Kandagatla Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 7f3ffd3..29dd87c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1536,9 +1536,7 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (!priv->phydev) return -EINVAL; - spin_lock(&priv->lock); ret = phy_mii_ioctl(priv->phydev, rq, cmd); - spin_unlock(&priv->lock); return ret; } -- cgit v0.10.2 From 102463b18d922dd55c29fbfa222e0355ecf3e42f Mon Sep 17 00:00:00 2001 From: Francesco Virlinzi Date: Wed, 16 Nov 2011 21:58:02 +0000 Subject: stmmac: fix pm functions avoiding sleep on spinlock This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 29dd87c..8ea770a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2011,12 +2011,13 @@ static int stmmac_suspend(struct device *dev) if (!ndev || !netif_running(ndev)) return 0; + if (priv->phydev) + phy_stop(priv->phydev); + spin_lock(&priv->lock); netif_device_detach(ndev); netif_stop_queue(ndev); - if (priv->phydev) - phy_stop(priv->phydev); #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); @@ -2074,12 +2075,13 @@ static int stmmac_resume(struct device *dev) #endif napi_enable(&priv->napi); - if (priv->phydev) - phy_start(priv->phydev); - netif_start_queue(ndev); spin_unlock(&priv->lock); + + if (priv->phydev) + phy_start(priv->phydev); + return 0; } -- cgit v0.10.2 From fc9f899483435935c1cd7005df29681929d1c99b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 9 Jul 2011 18:04:39 +0200 Subject: fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free Memory allocated using kmem_cache_zalloc should be freed using kmem_cache_free, not kfree. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,e,e1,e2; @@ x = kmem_cache_zalloc(e1,e2) ... when != x = e ?-kfree(x) +kmem_cache_free(e1,x) // Signed-off-by: Julia Lawall Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index f32fcba..975810b 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -438,7 +438,7 @@ struct dlm_lock * dlm_new_lock(int type, u8 node, u64 cookie, /* zero memory only if kernel-allocated */ lksb = kzalloc(sizeof(*lksb), GFP_NOFS); if (!lksb) { - kfree(lock); + kmem_cache_free(dlm_lock_cache, lock); return NULL; } kernel_allocated = 1; -- cgit v0.10.2 From 8298524803339a9a8df053ebdfebc2975ec55be9 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 12 Jul 2011 16:43:14 +0800 Subject: ocfs2: make direntry invalid when deleting it When we deleting a direntry from a directory, if it's the first in a block we invalid it by setting inode to 0; otherwise, we merge the deleted one to the prior and contiguous direntry. And we don't truncate directories. There is a problem for the later case since inode is not set to 0. This problem happens when the caller passes a file position as parameter to ocfs2_dir_foreach_blk(). If the position happens to point to a stale(not the first, deleted in betweens of ocfs2_dir_foreach_blk()s) direntry, we are not able to recognize its staleness. So that we treat it as a live one wrongly. The fix is to set inode to 0 in both cases indicating the direntry is stale. This won't introduce additional IOs. Signed-off-by: Wengang Wang Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 8582e3f..3302088 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -1184,8 +1184,7 @@ static int __ocfs2_delete_entry(handle_t *handle, struct inode *dir, if (pde) le16_add_cpu(&pde->rec_len, le16_to_cpu(de->rec_len)); - else - de->inode = 0; + de->inode = 0; dir->i_version++; ocfs2_journal_dirty(handle, bh); goto bail; -- cgit v0.10.2 From b8a0ae579fb8d9b21008ac386be08b9428902455 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Wed, 12 Oct 2011 15:22:15 +0800 Subject: ocfs2: Commit transactions in error cases -v2 There are three cases found that in error cases, journal transactions are not committed nor aborted. We should take care of these case by committing the transactions. Otherwise, there would left a journal handle which will lead to , in same process context, the comming ocfs2_start_trans() gets wrong credits. Signed-off-by: Wengang Wang Signed-off-by: Joel Becker diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index ed553c6..3165aeb 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -5699,7 +5699,7 @@ int ocfs2_remove_btree_range(struct inode *inode, OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); - goto out; + goto out_commit; } dquot_free_space_nodirty(inode, diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index d9a6ce7..726ff26 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -122,7 +122,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, if ((oldflags & OCFS2_IMMUTABLE_FL) || ((flags ^ oldflags) & (OCFS2_APPEND_FL | OCFS2_IMMUTABLE_FL))) { if (!capable(CAP_LINUX_IMMUTABLE)) - goto bail_unlock; + goto bail_commit; } ocfs2_inode->ip_attr = flags; @@ -132,6 +132,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, if (status < 0) mlog_errno(status); +bail_commit: ocfs2_commit_trans(osb, handle); bail_unlock: ocfs2_inode_unlock(inode, 1); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 81ecf9c..93d6c80b 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2376,16 +2376,18 @@ static int ocfs2_remove_value_outside(struct inode*inode, } ret = ocfs2_xattr_value_truncate(inode, vb, 0, &ctxt); - if (ret < 0) { - mlog_errno(ret); - break; - } ocfs2_commit_trans(osb, ctxt.handle); if (ctxt.meta_ac) { ocfs2_free_alloc_context(ctxt.meta_ac); ctxt.meta_ac = NULL; } + + if (ret < 0) { + mlog_errno(ret); + break; + } + } if (ctxt.meta_ac) -- cgit v0.10.2 From e41d33af7c037a6f7350f8410b45ce83b50d1b80 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Mon, 17 Oct 2011 16:47:17 -0700 Subject: ocfs2: send correct UUID to cleancache initialization ocfs2: Fix cleancache initialization call to correctly pass uuid As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221 the ocfs2 volume UUID is incorrectly passed to cleancache. As a result, shared-ephemeral tmem pools will not actually be created; instead they will be private (unshared) which misses out on a major benefit of tmem. Reported-by: Steven Whitehouse Signed-off-by: Dan Magenheimer Signed-off-by: Joel Becker diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 938e2b2..4994f8b 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -2360,7 +2360,7 @@ static int ocfs2_initialize_super(struct super_block *sb, mlog_errno(status); goto bail; } - cleancache_init_shared_fs((char *)&uuid_net_key, sb); + cleancache_init_shared_fs((char *)&di->id2.i_super.s_uuid, sb); bail: return status; -- cgit v0.10.2 From 0393afea31874947b1d149b82d17b7dccac4f210 Mon Sep 17 00:00:00 2001 From: "Xiaowei.Hu" Date: Wed, 19 Oct 2011 09:34:19 +0800 Subject: ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 With indexed_dir enabled, ocfs2 maintains a list of dirblocks having space. The credit calculation in ocfs2_link_credits() did not correctly account for adding an entry that exactly fills a dirblock that triggers removing that dirblock by changing the pointer in the previous block in the list. The credit calculation did not account for that previous block. To expose, do: mkfs.ocfs2 -b 512 -M local /dev/sdX mount /dev/sdX /ocfs2 mkdir /ocfs2/linkdir touch /ocfs2/linkdir/file1 for i in `seq 1 29` ; do link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklink$i; done rm -f /ocfs2/linkdir/linklinklinklinklinklink10 sleep 8 link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklinkaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa Note: The link names have been crafted for a 512 byte blocksize. Reproducing with a larger blocksize will require longer (or more) links. The sleep is important. We want jbd2 to commit the transaction so that the missing block does not piggy back on account of the previous transaction. Signed-off-by: XiaoweiHu Reviewed-by: WengangWang Reviewed-by: Sunil.Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 68cf2f6..a3385b6 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -441,10 +441,11 @@ static inline int ocfs2_mknod_credits(struct super_block *sb, int is_dir, #define OCFS2_SIMPLE_DIR_EXTEND_CREDITS (2) /* file update (nlink, etc) + directory mtime/ctime + dir entry block + quota - * update on dir + index leaf + dx root update for free list */ + * update on dir + index leaf + dx root update for free list + + * previous dirblock update in the free list */ static inline int ocfs2_link_credits(struct super_block *sb) { - return 2*OCFS2_INODE_UPDATE_CREDITS + 3 + + return 2*OCFS2_INODE_UPDATE_CREDITS + 4 + ocfs2_quota_trans_credits(sb); } -- cgit v0.10.2 From df295d4a4b3c98af1a2445a82aef169e7e5d96b8 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 16 Nov 2011 12:03:10 -0800 Subject: ocfs2: honor O_(D)SYNC flag in fallocate We need to sync the transaction which updates i_size if the file is marked as needing sync semantics. Signed-off-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 5c4a74e..09e3de5 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1950,6 +1950,9 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, if (ret < 0) mlog_errno(ret); + if (file->f_flags & O_SYNC) + handle->h_sync = 1; + ocfs2_commit_trans(osb, handle); out_inode_unlock: -- cgit v0.10.2 From 249ec93c01db8898058899a80ffb537c8d27f86f Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 8 Nov 2011 00:20:39 +0100 Subject: ocfs2: Use filemap_write_and_wait() instead of write_inode_now() Since ocfs2 has no ->write_inode method, there's no point in calling write_inode_now() from ocfs2_cleanup_delete_inode(). Use filemap_write_and_wait() instead. This helps us to cleanup inode writing interfaces... Signed-off-by: Jan Kara Signed-off-by: Joel Becker diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index b4c8bb6..c4bf6ac 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -951,7 +951,7 @@ static void ocfs2_cleanup_delete_inode(struct inode *inode, trace_ocfs2_cleanup_delete_inode( (unsigned long long)OCFS2_I(inode)->ip_blkno, sync_data); if (sync_data) - write_inode_now(inode, 1); + filemap_write_and_wait(inode->i_mapping); truncate_inode_pages(&inode->i_data, 0); } -- cgit v0.10.2 From 3627902377c4fbdeef4c689fb43b47a86a3ec859 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 17 Nov 2011 05:33:05 -0500 Subject: hwmon: (exynos4_tmu) Fix Kconfig dependency Rename dependency of EXYNOS4_TMU in Kconfig to the existing one. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 9ec854a..91be41f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -315,7 +315,7 @@ config SENSORS_DS1621 config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" - depends on EXYNOS4_DEV_TMU + depends on ARCH_EXYNOS4 help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS4 series of SoC. -- cgit v0.10.2 From f475058f48d3acb3c3979311c9532f3113839468 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Thu, 17 Nov 2011 18:54:29 +0800 Subject: ARM: imx6q: move clock register map to machine_desc.map_io map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 613a1b9..039a7ab 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = { imx_map_entry(MX6Q, ANATOP, MT_DEVICE), }; +void __init imx6q_clock_map_io(void) +{ + iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); +} + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; int i, irq; - iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); - /* retrieve the freqency of fixed clocks from device tree */ for_each_compatible_node(np, NULL, "fixed-clock") { u32 rate; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa3..9cd860a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -34,6 +34,7 @@ static void __init imx6q_map_io(void) { imx_lluart_map_io(); imx_scu_map_io(); + imx6q_clock_map_io(); } static void __init imx6q_gpio_add_irq_domain(struct device_node *np, diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a..7a5b6af 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -133,4 +133,5 @@ extern void imx53_qsb_common_init(void); extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_pm_init(void); +extern void imx6q_clock_map_io(void); #endif -- cgit v0.10.2 From d29387e8de8bdf64374874112b2b1540d3ada674 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Nov 2011 18:17:03 -0800 Subject: media/staging: fix allyesconfig build error Fix x86 allyesconfig builds. Builds fail due to a non-static variable named 'debug' in drivers/staging/media/as102: arch/x86/built-in.o:arch/x86/kernel/entry_32.S:1296: first defined here ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o Thou shalt have no non-static identifiers that are named 'debug'. Signed-off-by: Randy Dunlap Cc: Pierrick Hascoet Signed-off-by: Linus Torvalds diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c index d335c7d..828526d 100644 --- a/drivers/staging/media/as102/as102_drv.c +++ b/drivers/staging/media/as102/as102_drv.c @@ -32,8 +32,8 @@ #include "as102_fw.h" #include "dvbdev.h" -int debug; -module_param_named(debug, debug, int, 0644); +int as102_debug; +module_param_named(debug, as102_debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)"); int dual_tuner; diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h index bcda635..fd33f5a 100644 --- a/drivers/staging/media/as102/as102_drv.h +++ b/drivers/staging/media/as102/as102_drv.h @@ -37,7 +37,8 @@ extern struct spi_driver as102_spi_driver; #define DRIVER_FULL_NAME "Abilis Systems as10x usb driver" #define DRIVER_NAME "as10x_usb" -extern int debug; +extern int as102_debug; +#define debug as102_debug #define dprintk(debug, args...) \ do { if (debug) { \ -- cgit v0.10.2 From 869f8dfa52295e75e043af618e47305e4b109bc1 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Nov 2011 18:20:51 -0800 Subject: platform/x86: fix dell-laptop function prototypes Fix build warnings: drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype Signed-off-by: Randy Dunlap Cc: Matthew Garrett Signed-off-by: Linus Torvalds diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index a43cfd9..d93e962 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -589,14 +589,14 @@ static const struct backlight_ops dell_ops = { .update_status = dell_send_intensity, }; -static void touchpad_led_on() +static void touchpad_led_on(void) { int command = 0x97; char data = 1; i8042_command(&data, command | 1 << 12); } -static void touchpad_led_off() +static void touchpad_led_off(void) { int command = 0x97; char data = 2; -- cgit v0.10.2 From 1df647197c5b8aacaeb58592cba9a1df322c9000 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sun, 13 Nov 2011 19:47:32 -0600 Subject: writeback: hard throttle 1000+ dd on a slow USB stick The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 79c3441..e7cb5ff 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1136,14 +1136,11 @@ pause: __set_current_state(TASK_KILLABLE); io_schedule_timeout(pause); - dirty_thresh = hard_dirty_limit(dirty_thresh); /* - * max-pause area. If dirty exceeded but still within this - * area, no need to sleep for more than 200ms: (a) 8 pages per - * 200ms is typically more than enough to curb heavy dirtiers; - * (b) the pause time limit makes the dirtiers more responsive. + * This is typically equal to (nr_dirty < dirty_thresh) and can + * also keep "1000+ dd on a slow USB stick" under control. */ - if (nr_dirty < dirty_thresh) + if (task_ratelimit) break; if (fatal_signal_pending(current)) -- cgit v0.10.2 From 468e6a20afaccb67e2a7d7f60d301f90e1c6f301 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 7 Sep 2011 10:41:32 -0600 Subject: writeback: remove vm_dirties and task->dirties They are not used any more. Signed-off-by: Wu Fengguang diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab0..94b1e35 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -184,7 +184,6 @@ extern struct cred init_cred; [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ }, \ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \ - .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ INIT_IDS \ INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 68daf4f..1c4f3e9 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1521,7 +1521,6 @@ struct task_struct { #ifdef CONFIG_FAULT_INJECTION int make_it_fail; #endif - struct prop_local_single dirties; /* * when (nr_dirtied >= nr_dirtied_pause), it's time to call * balance_dirty_pages() for some dirty throttling pause diff --git a/kernel/fork.c b/kernel/fork.c index ba0d172..da4a6a1 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -162,7 +162,6 @@ static void account_kernel_stack(struct thread_info *ti, int account) void free_task(struct task_struct *tsk) { - prop_local_destroy_single(&tsk->dirties); account_kernel_stack(tsk->stack, -1); free_thread_info(tsk->stack); rt_mutex_debug_task_free(tsk); @@ -274,10 +273,6 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) tsk->stack = ti; - err = prop_local_init_single(&tsk->dirties); - if (err) - goto out; - setup_thread_stack(tsk, orig); clear_user_return_notifier(tsk); clear_tsk_need_resched(tsk); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index e7cb5ff..7125248 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -128,7 +128,6 @@ unsigned long global_dirty_limit; * */ static struct prop_descriptor vm_completions; -static struct prop_descriptor vm_dirties; /* * couple the period to the dirty_ratio: @@ -154,7 +153,6 @@ static void update_completion_period(void) { int shift = calc_period_shift(); prop_change_shift(&vm_completions, shift); - prop_change_shift(&vm_dirties, shift); writeback_set_ratelimit(); } @@ -235,11 +233,6 @@ void bdi_writeout_inc(struct backing_dev_info *bdi) } EXPORT_SYMBOL_GPL(bdi_writeout_inc); -void task_dirty_inc(struct task_struct *tsk) -{ - prop_inc_single(&vm_dirties, &tsk->dirties); -} - /* * Obtain an accurate fraction of the BDI's portion. */ @@ -1395,7 +1388,6 @@ void __init page_writeback_init(void) shift = calc_period_shift(); prop_descriptor_init(&vm_completions, shift); - prop_descriptor_init(&vm_dirties, shift); } /** @@ -1724,7 +1716,6 @@ void account_page_dirtied(struct page *page, struct address_space *mapping) __inc_zone_page_state(page, NR_DIRTIED); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); __inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED); - task_dirty_inc(current); task_io_account_write(PAGE_CACHE_SIZE); } } -- cgit v0.10.2 From bd29e568a4cb6465f6e5ec7c1c1f3ae7d99cbec1 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Wed, 16 Nov 2011 10:50:56 -0800 Subject: fix typo/thinko in get_random_bytes() If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by: Tony Luck Acked-by: H. Peter Anvin Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds diff --git a/drivers/char/random.c b/drivers/char/random.c index 63e19ba..6035ab8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -941,7 +941,7 @@ void get_random_bytes(void *buf, int nbytes) if (!arch_get_random_long(&v)) break; - memcpy(buf, &v, chunk); + memcpy(p, &v, chunk); p += chunk; nbytes -= chunk; } -- cgit v0.10.2 From 9e6dabeffd1d0ec2aa19aa076c4886067238d442 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Nov 2011 11:00:41 +0100 Subject: KVM: s390: Fix RUNNING flag misinterpretation CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Cc: stable@kernel.org Signed-off-by: Cornelia Huck Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 24e1847..20f9068 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -47,7 +47,7 @@ struct sca_block { #define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1)) #define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE) -#define CPUSTAT_HOST 0x80000000 +#define CPUSTAT_STOPPED 0x80000000 #define CPUSTAT_WAIT 0x10000000 #define CPUSTAT_ECALL_PEND 0x08000000 #define CPUSTAT_STOP_INT 0x04000000 diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index 87cedd6..8943e82 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -70,7 +70,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; } - atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); + atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM; vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL; vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT; diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index c7c5189..0243454 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -132,7 +132,6 @@ static int handle_stop(struct kvm_vcpu *vcpu) int rc = 0; vcpu->stat.exit_stop_request++; - atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); spin_lock_bh(&vcpu->arch.local_int.lock); if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) { vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP; @@ -149,6 +148,8 @@ static int handle_stop(struct kvm_vcpu *vcpu) } if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) { + atomic_set_mask(CPUSTAT_STOPPED, + &vcpu->arch.sie_block->cpuflags); vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP; VCPU_EVENT(vcpu, 3, "%s", "cpu stopped"); rc = -EOPNOTSUPP; diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 87c1670..278ee00 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -252,6 +252,7 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, offsetof(struct _lowcore, restart_psw), sizeof(psw_t)); if (rc == -EFAULT) exception = 1; + atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); break; case KVM_S390_PROGRAM_INT: diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0bd3bea..630ab65 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -270,10 +270,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) restore_fp_regs(&vcpu->arch.guest_fpregs); restore_access_regs(vcpu->arch.guest_acrs); gmap_enable(vcpu->arch.gmap); + atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); } void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); gmap_disable(vcpu->arch.gmap); save_fp_regs(&vcpu->arch.guest_fpregs); save_access_regs(vcpu->arch.guest_acrs); @@ -301,7 +303,9 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) { - atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM); + atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | + CPUSTAT_SM | + CPUSTAT_STOPPED); vcpu->arch.sie_block->ecb = 6; vcpu->arch.sie_block->eca = 0xC1002001U; vcpu->arch.sie_block->fac = (int) (long) facilities; @@ -428,7 +432,7 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw) { int rc = 0; - if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING) + if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED)) rc = -EBUSY; else { vcpu->run->psw_mask = psw.mask; @@ -501,7 +505,7 @@ rerun_vcpu: if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); + atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL); diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index f815118..4a488a9 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -57,8 +57,8 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, spin_lock(&fi->lock); if (fi->local_int[cpu_addr] == NULL) rc = 3; /* not operational */ - else if (atomic_read(fi->local_int[cpu_addr]->cpuflags) - & CPUSTAT_RUNNING) { + else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags) + & CPUSTAT_STOPPED)) { *reg &= 0xffffffff00000000UL; rc = 1; /* status stored */ } else { @@ -251,7 +251,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, spin_lock_bh(&li->lock); /* cpu must be in stopped state */ - if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) { + if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) { rc = 1; /* incorrect state */ *reg &= SIGP_STAT_INCORRECT_STATE; kfree(inti); -- cgit v0.10.2 From bd59d3a4444e5f941c863db1a7715edf7289e29a Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Nov 2011 11:00:42 +0100 Subject: KVM: s390: handle SIGP sense running intercepts SIGP sense running may cause an intercept on higher level virtualization, so handle it by checking the CPUSTAT_RUNNING flag. Signed-off-by: Cornelia Huck Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 20f9068..b0c235c 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -139,6 +139,7 @@ struct kvm_vcpu_stat { u32 instruction_stfl; u32 instruction_tprot; u32 instruction_sigp_sense; + u32 instruction_sigp_sense_running; u32 instruction_sigp_external_call; u32 instruction_sigp_emergency; u32 instruction_sigp_stop; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 630ab65..0891926 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -65,6 +65,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "instruction_stfl", VCPU_STAT(instruction_stfl) }, { "instruction_tprot", VCPU_STAT(instruction_tprot) }, { "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) }, + { "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) }, { "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) }, { "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) }, { "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) }, diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 4a488a9..0a7941d 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -31,9 +31,11 @@ #define SIGP_SET_PREFIX 0x0d #define SIGP_STORE_STATUS_ADDR 0x0e #define SIGP_SET_ARCH 0x12 +#define SIGP_SENSE_RUNNING 0x15 /* cpu status bits */ #define SIGP_STAT_EQUIPMENT_CHECK 0x80000000UL +#define SIGP_STAT_NOT_RUNNING 0x00000400UL #define SIGP_STAT_INCORRECT_STATE 0x00000200UL #define SIGP_STAT_INVALID_PARAMETER 0x00000100UL #define SIGP_STAT_EXT_CALL_PENDING 0x00000080UL @@ -275,6 +277,38 @@ out_fi: return rc; } +static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr, + unsigned long *reg) +{ + int rc; + struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; + + if (cpu_addr >= KVM_MAX_VCPUS) + return 3; /* not operational */ + + spin_lock(&fi->lock); + if (fi->local_int[cpu_addr] == NULL) + rc = 3; /* not operational */ + else { + if (atomic_read(fi->local_int[cpu_addr]->cpuflags) + & CPUSTAT_RUNNING) { + /* running */ + rc = 1; + } else { + /* not running */ + *reg &= 0xffffffff00000000UL; + *reg |= SIGP_STAT_NOT_RUNNING; + rc = 0; + } + } + spin_unlock(&fi->lock); + + VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr, + rc); + + return rc; +} + int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) { int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; @@ -331,6 +365,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) rc = __sigp_set_prefix(vcpu, cpu_addr, parameter, &vcpu->arch.guest_gprs[r1]); break; + case SIGP_SENSE_RUNNING: + vcpu->stat.instruction_sigp_sense_running++; + rc = __sigp_sense_running(vcpu, cpu_addr, + &vcpu->arch.guest_gprs[r1]); + break; case SIGP_RESTART: vcpu->stat.instruction_sigp_restart++; /* user space must know about restart */ -- cgit v0.10.2 From 1eddb85f889a5a9fe59ec184e06844716a00aded Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 17 Nov 2011 11:00:43 +0100 Subject: KVM: s390: Fix tprot locking There is a potential host deadlock in the tprot intercept handling. We must not hold the mmap semaphore while resolving the guest address. If userspace is remapping, then the memory detection in the guest is broken anyway so we can safely separate the address translation from walking the vmas. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 3916263..d026389 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -336,6 +336,7 @@ static int handle_tprot(struct kvm_vcpu *vcpu) u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0; u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0; struct vm_area_struct *vma; + unsigned long user_address; vcpu->stat.instruction_tprot++; @@ -349,9 +350,14 @@ static int handle_tprot(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; + /* we must resolve the address without holding the mmap semaphore. + * This is ok since the userspace hypervisor is not supposed to change + * the mapping while the guest queries the memory. Otherwise the guest + * might crash or get wrong info anyway. */ + user_address = (unsigned long) __guestaddr_to_user(vcpu, address1); + down_read(¤t->mm->mmap_sem); - vma = find_vma(current->mm, - (unsigned long) __guestaddr_to_user(vcpu, address1)); + vma = find_vma(current->mm, user_address); if (!vma) { up_read(¤t->mm->mmap_sem); return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); -- cgit v0.10.2 From 52e16b185fdd0aeb0522c203e944873e38ac1575 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 17 Nov 2011 11:00:44 +0100 Subject: KVM: s390: announce SYNC_MMU KVM on s390 always had a sync mmu. Any mapping change in userspace mapping was always reflected immediately in the guest mapping. - In older code the guest mapping was just an offset - In newer code the last level page table is shared Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0891926..d1c44573 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -128,6 +128,7 @@ int kvm_dev_ioctl_check_extension(long ext) switch (ext) { case KVM_CAP_S390_PSW: case KVM_CAP_S390_GMAP: + case KVM_CAP_SYNC_MMU: r = 1; break; default: -- cgit v0.10.2 From 8bf00a529967dafbbb210b377c38a15834d1e979 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:22 +0200 Subject: KVM: VMX: add support for switching of PERF_GLOBAL_CTRL Some cpus have special support for switching PERF_GLOBAL_CTRL msr. Add logic to detect if such support exists and works properly and extend msr switching code to use it if available. Also extend number of generic msr switching entries to 8. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index a0d6bd9..55e849b 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -118,7 +118,7 @@ module_param(ple_gap, int, S_IRUGO); static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW; module_param(ple_window, int, S_IRUGO); -#define NR_AUTOLOAD_MSRS 1 +#define NR_AUTOLOAD_MSRS 8 #define VMCS02_POOL_SIZE 1 struct vmcs { @@ -622,6 +622,7 @@ static unsigned long *vmx_msr_bitmap_legacy; static unsigned long *vmx_msr_bitmap_longmode; static bool cpu_has_load_ia32_efer; +static bool cpu_has_load_perf_global_ctrl; static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS); static DEFINE_SPINLOCK(vmx_vpid_lock); @@ -1191,15 +1192,34 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu) vmcs_write32(EXCEPTION_BITMAP, eb); } +static void clear_atomic_switch_msr_special(unsigned long entry, + unsigned long exit) +{ + vmcs_clear_bits(VM_ENTRY_CONTROLS, entry); + vmcs_clear_bits(VM_EXIT_CONTROLS, exit); +} + static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr) { unsigned i; struct msr_autoload *m = &vmx->msr_autoload; - if (msr == MSR_EFER && cpu_has_load_ia32_efer) { - vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER); - vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER); - return; + switch (msr) { + case MSR_EFER: + if (cpu_has_load_ia32_efer) { + clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER, + VM_EXIT_LOAD_IA32_EFER); + return; + } + break; + case MSR_CORE_PERF_GLOBAL_CTRL: + if (cpu_has_load_perf_global_ctrl) { + clear_atomic_switch_msr_special( + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL); + return; + } + break; } for (i = 0; i < m->nr; ++i) @@ -1215,18 +1235,44 @@ static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr) vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr); } +static void add_atomic_switch_msr_special(unsigned long entry, + unsigned long exit, unsigned long guest_val_vmcs, + unsigned long host_val_vmcs, u64 guest_val, u64 host_val) +{ + vmcs_write64(guest_val_vmcs, guest_val); + vmcs_write64(host_val_vmcs, host_val); + vmcs_set_bits(VM_ENTRY_CONTROLS, entry); + vmcs_set_bits(VM_EXIT_CONTROLS, exit); +} + static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr, u64 guest_val, u64 host_val) { unsigned i; struct msr_autoload *m = &vmx->msr_autoload; - if (msr == MSR_EFER && cpu_has_load_ia32_efer) { - vmcs_write64(GUEST_IA32_EFER, guest_val); - vmcs_write64(HOST_IA32_EFER, host_val); - vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER); - vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER); - return; + switch (msr) { + case MSR_EFER: + if (cpu_has_load_ia32_efer) { + add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER, + VM_EXIT_LOAD_IA32_EFER, + GUEST_IA32_EFER, + HOST_IA32_EFER, + guest_val, host_val); + return; + } + break; + case MSR_CORE_PERF_GLOBAL_CTRL: + if (cpu_has_load_perf_global_ctrl) { + add_atomic_switch_msr_special( + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL, + GUEST_IA32_PERF_GLOBAL_CTRL, + HOST_IA32_PERF_GLOBAL_CTRL, + guest_val, host_val); + return; + } + break; } for (i = 0; i < m->nr; ++i) @@ -2455,6 +2501,42 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS, VM_EXIT_LOAD_IA32_EFER); + cpu_has_load_perf_global_ctrl = + allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS, + VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL) + && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS, + VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL); + + /* + * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL + * but due to arrata below it can't be used. Workaround is to use + * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL. + * + * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32] + * + * AAK155 (model 26) + * AAP115 (model 30) + * AAT100 (model 37) + * BC86,AAY89,BD102 (model 44) + * BA97 (model 46) + * + */ + if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) { + switch (boot_cpu_data.x86_model) { + case 26: + case 30: + case 37: + case 44: + case 46: + cpu_has_load_perf_global_ctrl = false; + printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL " + "does not work properly. Using workaround\n"); + break; + default: + break; + } + } + return 0; } -- cgit v0.10.2 From d7cd97964ba6d70c558348bd2c87290dce885583 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:23 +0200 Subject: KVM: VMX: Add support for guest/host-only profiling Support guest/host-only profiling by switch perf msrs on a guest entry if needed. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 55e849b..98f4b0b 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "trace.h" @@ -6050,6 +6051,24 @@ static void vmx_cancel_injection(struct kvm_vcpu *vcpu) vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); } +static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx) +{ + int i, nr_msrs; + struct perf_guest_switch_msr *msrs; + + msrs = perf_guest_get_msrs(&nr_msrs); + + if (!msrs) + return; + + for (i = 0; i < nr_msrs; i++) + if (msrs[i].host == msrs[i].guest) + clear_atomic_switch_msr(vmx, msrs[i].msr); + else + add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest, + msrs[i].host); +} + #ifdef CONFIG_X86_64 #define R "r" #define Q "q" @@ -6099,6 +6118,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) vmx_set_interrupt_shadow(vcpu, 0); + atomic_switch_perf_msrs(vmx); + vmx->__launched = vmx->loaded_vmcs->launched; asm( /* Store host registers */ -- cgit v0.10.2 From e7fc6f93b4242b2b566f0070709e27257d6da8a2 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 5 Oct 2011 14:01:24 +0200 Subject: KVM: VMX: Check for automatic switch msr table overflow Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 98f4b0b..579a0b5 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1280,7 +1280,11 @@ static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr, if (m->guest[i].index == msr) break; - if (i == m->nr) { + if (i == NR_AUTOLOAD_MSRS) { + printk_once(KERN_WARNING"Not enough mst switch entries. " + "Can't add msr %x\n", msr); + return; + } else if (i == m->nr) { ++m->nr; vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr); vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr); -- cgit v0.10.2 From bb75c627fb0dfb8c0ab75d3033709ff928896e16 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Thu, 17 Nov 2011 15:26:35 +0100 Subject: Revert "KVM: PPC: Add support for explicit HIOR setting" This reverts commit a15bd354f083f20f257db450488db52ac27df439. It exceeded the padding on the SREGS struct, rendering the ABI backwards-incompatible. Conflicts: arch/powerpc/kvm/powerpc.c include/linux/kvm.h Signed-off-by: Avi Kivity diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index 08fe69e..0ad432b 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -149,12 +149,6 @@ struct kvm_regs { #define KVM_SREGS_E_UPDATE_DBSR (1 << 3) /* - * Book3S special bits to indicate contents in the struct by maintaining - * backwards compatibility with older structs. If adding a new field, - * please make sure to add a flag for that new field */ -#define KVM_SREGS_S_HIOR (1 << 0) - -/* * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a * previous KVM_GET_REGS. * @@ -179,8 +173,6 @@ struct kvm_sregs { __u64 ibat[8]; __u64 dbat[8]; } ppc32; - __u64 flags; /* KVM_SREGS_S_ */ - __u64 hior; } s; struct { union { diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index a384ffd..d4df013 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -90,8 +90,6 @@ struct kvmppc_vcpu_book3s { #endif int context_id[SID_CONTEXTS]; - bool hior_sregs; /* HIOR is set by SREGS, not PVR */ - struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE]; struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG]; struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE]; diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index bc4d50d..3c791e1 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -151,16 +151,14 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr) #ifdef CONFIG_PPC_BOOK3S_64 if ((pvr >= 0x330000) && (pvr < 0x70330000)) { kvmppc_mmu_book3s_64_init(vcpu); - if (!to_book3s(vcpu)->hior_sregs) - to_book3s(vcpu)->hior = 0xfff00000; + to_book3s(vcpu)->hior = 0xfff00000; to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_64; } else #endif { kvmppc_mmu_book3s_32_init(vcpu); - if (!to_book3s(vcpu)->hior_sregs) - to_book3s(vcpu)->hior = 0; + to_book3s(vcpu)->hior = 0; to_book3s(vcpu)->msr_mask = 0xffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_32; } @@ -797,9 +795,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, } } - if (sregs->u.s.flags & KVM_SREGS_S_HIOR) - sregs->u.s.hior = to_book3s(vcpu)->hior; - return 0; } @@ -836,11 +831,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, /* Flush the MMU after messing with the segments */ kvmppc_mmu_pte_flush(vcpu, 0, 0); - if (sregs->u.s.flags & KVM_SREGS_S_HIOR) { - to_book3s(vcpu)->hior_sregs = true; - to_book3s(vcpu)->hior = sregs->u.s.hior; - } - return 0; } diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index efbf9ad..607fbdf 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -208,7 +208,6 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PPC_BOOKE_SREGS: #else case KVM_CAP_PPC_SEGSTATE: - case KVM_CAP_PPC_HIOR: case KVM_CAP_PPC_PAPR: #endif case KVM_CAP_PPC_UNSET_IRQ: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index f47fcd3..c3892fc 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -555,7 +555,6 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ -#define KVM_CAP_PPC_HIOR 67 #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_S390_GMAP 71 -- cgit v0.10.2 From bce34d14428d35d9a06ddc10cd46ecef311764c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 17 Nov 2011 15:05:14 +0000 Subject: ARM: perf: initialise used_mask for fake PMU during validation When validating an event group, we call pmu->get_event_idx for each group member in order to check that the group can be scheduled as a unit on an empty PMU. As a result of 3fc2c830 ("ARM: perf: remove event limit from pmu_hw_events"), the used_mask member of struct cpu_hw_events must be setup explicitly, something which we don't do for the fake cpu_hw_events used for validation. This patch sets up an empty used_mask for the fake validation cpu_hw_events, preventing NULL deferences when trying to get the event index. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347..e508066 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -343,8 +343,14 @@ validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; struct pmu_hw_events fake_pmu; + DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS); - memset(&fake_pmu, 0, sizeof(fake_pmu)); + /* + * Initialise the fake PMU. We only need to populate the + * used_mask for the purposes of validation. + */ + memset(fake_used_mask, 0, sizeof(fake_used_mask)); + fake_pmu.used_mask = fake_used_mask; if (!validate_event(&fake_pmu, leader)) return -ENOSPC; -- cgit v0.10.2 From 2ed0e645f358c26f4f4a7aed56a9488db0020ad1 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 16 Nov 2011 12:27:39 +0000 Subject: genirq: Don't allow per cpu interrupts to be suspended The power management functions related to interrupts do not know (yet) about per-cpu interrupts and end up calling the wrong low-level methods to enable/disable interrupts. This leads to all kind of interesting issues (action taken on one CPU only, updating a refcount which is not used otherwise...). The workaround for the time being is simply to flag these interrupts with IRQF_NO_SUSPEND. At least on ARM, these interrupts are actually dealt with at the architecture level. Reported-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1321446459-31409-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 67ce837..0e2b179 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1596,7 +1596,7 @@ int request_percpu_irq(unsigned int irq, irq_handler_t handler, return -ENOMEM; action->handler = handler; - action->flags = IRQF_PERCPU; + action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND; action->name = devname; action->percpu_dev_id = dev_id; -- cgit v0.10.2 From 2391a0e06789a3f1718dee30b282562f7ed28c87 Mon Sep 17 00:00:00 2001 From: Timo Juhani Lindfors Date: Thu, 17 Nov 2011 02:52:50 +0200 Subject: ASoC: wm8753: Skip noop reconfiguration of DAI mode This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann . Signed-off-by: Timo Juhani Lindfors Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index a950471..3a629d0 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -190,6 +190,9 @@ static int wm8753_set_dai(struct snd_kcontrol *kcontrol, struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec); u16 ioctl; + if (wm8753->dai_func == ucontrol->value.integer.value[0]) + return 0; + if (codec->active) return -EBUSY; -- cgit v0.10.2 From e5489847d6fc0ff176048b6e1cf5034507bf703a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 17 Nov 2011 16:58:00 +0000 Subject: ARM: wire up process_vm_writev and process_vm_readv syscalls These two syscalls were introduced during the last merge window. Add the entries into the ARM call tables for them. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c60a294..4a11237 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -402,6 +402,8 @@ #define __NR_syncfs (__NR_SYSCALL_BASE+373) #define __NR_sendmmsg (__NR_SYSCALL_BASE+374) #define __NR_setns (__NR_SYSCALL_BASE+375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9943e9e..463ff4a 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -385,6 +385,8 @@ CALL(sys_syncfs) CALL(sys_sendmmsg) /* 375 */ CALL(sys_setns) + CALL(sys_process_vm_readv) + CALL(sys_process_vm_writev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v0.10.2 From df92d0561de364de53c42abc5d43e04ab6f326a5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:07 +0100 Subject: TTY: ldisc, allow waiting for ldisc arbitrarily long To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely long for ldisc to be gone. So here we add a parameter to tty_ldisc_wait_idle to allow that. This is only a preparation for the real fix which is done in the following patches. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 512c49f..534d176 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -547,15 +547,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) /** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for + * @timeout: for how long to wait at most * * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. */ -static int tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) { - int ret; + long ret; ret = wait_event_timeout(tty_ldisc_idle, - atomic_read(&tty->ldisc->users) == 1, 5 * HZ); + atomic_read(&tty->ldisc->users) == 1, timeout); if (ret < 0) return ret; return ret > 0 ? 0 : -EBUSY; @@ -665,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_flush_works(tty); - retval = tty_ldisc_wait_idle(tty); + retval = tty_ldisc_wait_idle(tty, 5 * HZ); tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -762,7 +763,7 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); -- cgit v0.10.2 From 300420722e0734a4254f3b634e0f82664495d210 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:08 +0100 Subject: TTY: ldisc, move wait idle to caller It is the only place where reinit is called from. And we really need to wait for the old ldisc to go once. Actually this is the place where the waiting originally was (before removed and re-added later). This will make the fix in the following patch easier to implement. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 534d176..a69a755 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -763,8 +763,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); - tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; @@ -848,6 +846,8 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ + WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (reset == 0) { if (!tty_ldisc_reinit(tty, tty->termios->c_line)) -- cgit v0.10.2 From 0c73c08ec73dbe080b9ec56696ee21d32754d918 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 16 Nov 2011 16:27:09 +0100 Subject: TTY: ldisc, wait for ldisc infinitely in hangup For /dev/console case, we do not kill all ldisc users. It's due to redirected_tty_write test in __tty_hangup. In that case there still might be a process waiting e.g. in n_tty_read for input. We wait for such processes to disappear. The problem is that we use a timeout. After this timeout, we continue closing the ldisc and start freeing tty resources. It obviously leads to crashes when the other process is woken. So to fix this, we wait infinitely before reiniting the ldisc. (The tiocsetd remains untouched -- times out after 5s.) This is nicely reproducible with this run from shell: exec 0<>/dev/console 1<>/dev/console 2<>/dev/console and stopping a getty like: systemctl stop serial-getty@ttyS0.service The crash proper may be produced only under load or with constified timing the same as for 92f6fa09b. Signed-off-by: Jiri Slaby Cc: Dave Young Cc: Dave Jones Cc: Ben Hutchings Cc: Dmitriy Matrosov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index a69a755..8e0924f 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -36,6 +36,7 @@ #include #include +#include /* * This guards the refcounted line discipline lists. The lock @@ -837,7 +838,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) tty_unlock(); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - +retry: tty_lock(); mutex_lock(&tty->ldisc_mutex); @@ -846,7 +847,21 @@ void tty_ldisc_hangup(struct tty_struct *tty) it means auditing a lot of other paths so this is a FIXME */ if (tty->ldisc) { /* Not yet closed */ - WARN_ON_ONCE(tty_ldisc_wait_idle(tty, 5 * HZ)); + if (atomic_read(&tty->ldisc->users) != 1) { + char cur_n[TASK_COMM_LEN], tty_n[64]; + long timeout = 3 * HZ; + tty_unlock(); + + while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { + timeout = MAX_SCHEDULE_TIMEOUT; + printk_ratelimited(KERN_WARNING + "%s: waiting (%s) for %s took too long, but we keep waiting...\n", + __func__, get_task_comm(cur_n, current), + tty_name(tty, tty_n)); + } + mutex_unlock(&tty->ldisc_mutex); + goto retry; + } if (reset == 0) { -- cgit v0.10.2 From 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Nov 2011 11:09:17 +0100 Subject: rt2800pci: handle spurious interrupts Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] [] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [] note_interrupt+0x11a/0x17f [ 2052.114352] [] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [] handle_irq+0x88/0x90 [ 2052.114357] [] do_IRQ+0x5c/0xb4 [ 2052.114360] [] ret_from_intr+0x0/0x11 [ 2052.114361] [] ? native_safe_halt+0xb/0xd [ 2052.114366] [] ? need_resched+0x23/0x2d [ 2052.114367] [] default_idle+0x34/0x4f [ 2052.114370] [] cpu_idle+0xaa/0xcc [ 2052.114373] [] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index da48c8a..4dc2d0f 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -880,8 +880,13 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + /* + * Some devices can generate interrupts with empty CSR register, we + * "handle" such irq's to prevent interrupt controller treat them as + * spurious interrupts and disable irq line. + */ if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; -- cgit v0.10.2 From 23085d5796561625db4143a671f1de081f66ef08 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Nov 2011 13:58:42 +0100 Subject: rt2x00: handle spurious pci interrupts We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 3a6b402..676c765 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1380,7 +1380,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index dcc0e1f..d0b627c 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1512,7 +1512,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index bf55b4a..9d83e70f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2337,7 +2337,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg && !reg_mcu) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; -- cgit v0.10.2 From 68fa64ef606bcee688fce46d07aa68f175070156 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 16 Nov 2011 23:16:15 +0100 Subject: rt2x00: Fix efuse EEPROM reading on PPC32. Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund Signed-off-by: Gertjan van Wingerde CC: Acked-by: Helmut Schaa Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 3f183a1..1ba079d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3771,7 +3771,7 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) /* Apparently the data is read from end to start */ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®); /* The returned value is in CPU order, but eeprom is le */ - rt2x00dev->eeprom[i] = cpu_to_le32(reg); + *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®); *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®); -- cgit v0.10.2 From 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Wed, 16 Nov 2011 23:48:31 +0100 Subject: p54spi: Add missing spin_lock_init The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch Cc: Acked-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index f18df82..dda97c5 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -656,6 +656,7 @@ static int __devinit p54spi_probe(struct spi_device *spi) init_completion(&priv->fw_comp); INIT_LIST_HEAD(&priv->tx_pending); mutex_init(&priv->mutex); + spin_lock_init(&priv->tx_lock); SET_IEEE80211_DEV(hw, &spi->dev); priv->common.open = p54spi_op_start; priv->common.stop = p54spi_op_stop; -- cgit v0.10.2 From 2d1618170eb493d18f66f2ac03775409a6fb97c6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Wed, 16 Nov 2011 23:55:46 +0100 Subject: p54spi: Fix workqueue deadlock priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch Cc: Acked-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index dda97c5..78d0d69 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -588,8 +588,6 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) WARN_ON(priv->fw_state != FW_STATE_READY); - cancel_work_sync(&priv->work); - p54spi_power_off(priv); spin_lock_irqsave(&priv->tx_lock, flags); INIT_LIST_HEAD(&priv->tx_pending); @@ -597,6 +595,8 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) priv->fw_state = FW_STATE_OFF; mutex_unlock(&priv->mutex); + + cancel_work_sync(&priv->work); } static int __devinit p54spi_probe(struct spi_device *spi) -- cgit v0.10.2 From 8b258cc8ac229aa7d5dcb7cc34cb35d9124498ac Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 17 Nov 2011 21:39:33 +0100 Subject: PM Sleep: Do not extend wakeup paths to devices with ignore_children set Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 7fa0984..c3d2dfc 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -920,7 +920,8 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) End: if (!error) { dev->power.is_suspended = true; - if (dev->power.wakeup_path && dev->parent) + if (dev->power.wakeup_path + && dev->parent && !dev->parent->power.ignore_children) dev->parent->power.wakeup_path = true; } diff --git a/include/linux/device.h b/include/linux/device.h index ffbcf95..52b3a41 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -682,6 +682,11 @@ static inline bool device_async_suspend_enabled(struct device *dev) return !!dev->power.async_suspend; } +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) +{ + dev->power.ignore_children = enable; +} + static inline void device_lock(struct device *dev) { mutex_lock(&dev->mutex); diff --git a/include/linux/pm.h b/include/linux/pm.h index f15acb6..5c4c8b1 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -447,6 +447,7 @@ struct dev_pm_info { unsigned int async_suspend:1; bool is_prepared:1; /* Owned by the PM core */ bool is_suspended:1; /* Ditto */ + bool ignore_children:1; spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; @@ -464,7 +465,6 @@ struct dev_pm_info { atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; - unsigned int ignore_children:1; unsigned int idle_notification:1; unsigned int request_pending:1; unsigned int deferred_resume:1; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index d8d9036..d3085e7 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -52,11 +52,6 @@ static inline bool pm_children_suspended(struct device *dev) || !atomic_read(&dev->power.child_count); } -static inline void pm_suspend_ignore_children(struct device *dev, bool enable) -{ - dev->power.ignore_children = enable; -} - static inline void pm_runtime_get_noresume(struct device *dev) { atomic_inc(&dev->power.usage_count); @@ -130,7 +125,6 @@ static inline void pm_runtime_allow(struct device *dev) {} static inline void pm_runtime_forbid(struct device *dev) {} static inline bool pm_children_suspended(struct device *dev) { return false; } -static inline void pm_suspend_ignore_children(struct device *dev, bool en) {} static inline void pm_runtime_get_noresume(struct device *dev) {} static inline void pm_runtime_put_noidle(struct device *dev) {} static inline bool device_run_wake(struct device *dev) { return false; } -- cgit v0.10.2 From 88995e809f8a8115f30db24696c9137aad93d570 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 17 Nov 2011 21:39:55 +0100 Subject: PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unset Fix build regression introduced by commit 056879d2f244001b2888cdc8cf (ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix) by moving the intialization of the A3SP domain to a separate function and providing an empty definition of it for CONFIG_PM unset. Reported-and-tested-by: Guennadi Liakhovetski Signed-off-by: Rafael J. Wysocki diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 1ec35eb..f15f07e 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -232,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = { .no_debug = true, }; +static void sh7372_a3sp_init(void) +{ + /* serial consoles make use of SCIF hardware located in A3SP, + * keep such power domain on if "no_console_suspend" is set. + */ + sh7372_a3sp.stay_on = !console_suspend_enabled; +} + struct sh7372_pm_domain sh7372_a3sg = { .bit_shift = 13, }; -#endif /* CONFIG_PM */ +#else /* !CONFIG_PM */ + +static inline void sh7372_a3sp_init(void) {} + +#endif /* !CONFIG_PM */ #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) static int sh7372_do_idle_core_standby(unsigned long unused) @@ -474,10 +486,7 @@ void __init sh7372_pm_init(void) /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ __raw_writel(0, PDNSEL); - /* serial consoles make use of SCIF hardware located in A3SP, - * keep such power domain on if "no_console_suspend" is set. - */ - sh7372_a3sp.stay_on = !console_suspend_enabled; + sh7372_a3sp_init(); sh7372_suspend_init(); sh7372_cpuidle_init(); -- cgit v0.10.2 From 457eafce618cf89125da9d79751d81241bd3fa34 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 16 Nov 2011 00:49:28 +0600 Subject: drm, i915: Fix memory leak in i915_gem_busy_ioctl(). A call to i915_add_request() has been made in function i915_gem_busy_ioctl(). i915_add_request can fail, so in it's exit path previously allocated memory needs to be freed. Signed-off-by: Rakib Mullick Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ed0b68f..8359dc7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3512,9 +3512,11 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * so emit a request to do so. */ request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request) + if (request) { ret = i915_add_request(obj->ring, NULL, request); - else + if (ret) + kfree(request); + } else ret = -ENOMEM; } -- cgit v0.10.2 From f6f8285132907757ef84ef8dae0a1244b8cde6ac Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 17 Nov 2011 12:58:07 -0800 Subject: pstore: pass allocated memory region back to caller The buf_lock cannot be held while populating the inodes, so make the backend pass forward an allocated and filled buffer instead. This solves the following backtrace. The effect is that "buf" is only ever used to notify the backends that something was written to it, and shouldn't be used in the read path. To replace the buf_lock during the read path, isolate the open/read/close loop with a separate mutex to maintain serialized access to the backend. Note that is is up to the pstore backend to cope if the (*write)() path is called in the middle of the read path. [ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847 [ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount [ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1 [ 59.691019] Call Trace: [ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca [ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3 [ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4 [ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64 [ 59.691019] [<810b6903>] new_inode+0x18/0x43 [ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98 [ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f [ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1 [ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158 [ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c [ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0 [ 59.691019] [<8102127e>] ? should_resched+0xd/0x27 [ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21 [ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7 [ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91 [ 59.691019] [<810a7ff5>] mount_single+0x46/0x82 [ 59.691019] [<8114231a>] pstore_mount+0x15/0x17 [ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98 [ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d [ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a [ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d [ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2 [ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a [ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f [ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99 [ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26 Signed-off-by: Kees Cook Signed-off-by: Tony Luck diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 1274080..631b947 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -932,7 +932,8 @@ static int erst_check_table(struct acpi_table_erst *erst_tab) static int erst_open_pstore(struct pstore_info *psi); static int erst_close_pstore(struct pstore_info *psi); static ssize_t erst_reader(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); static int erst_clearer(enum pstore_type_id type, u64 id, @@ -986,17 +987,23 @@ static int erst_close_pstore(struct pstore_info *psi) } static ssize_t erst_reader(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi) + struct timespec *time, char **buf, + struct pstore_info *psi) { int rc; ssize_t len = 0; u64 record_id; - struct cper_pstore_record *rcd = (struct cper_pstore_record *) - (erst_info.buf - sizeof(*rcd)); + struct cper_pstore_record *rcd; + size_t rcd_len = sizeof(*rcd) + erst_info.bufsize; if (erst_disable) return -ENODEV; + rcd = kmalloc(rcd_len, GFP_KERNEL); + if (!rcd) { + rc = -ENOMEM; + goto out; + } skip: rc = erst_get_record_id_next(&reader_pos, &record_id); if (rc) @@ -1004,22 +1011,27 @@ skip: /* no more record */ if (record_id == APEI_ERST_INVALID_RECORD_ID) { - rc = -1; + rc = -EINVAL; goto out; } - len = erst_read(record_id, &rcd->hdr, sizeof(*rcd) + - erst_info.bufsize); + len = erst_read(record_id, &rcd->hdr, rcd_len); /* The record may be cleared by others, try read next record */ if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; } if (uuid_le_cmp(rcd->hdr.creator_id, CPER_CREATOR_PSTORE) != 0) goto skip; + *buf = kmalloc(len, GFP_KERNEL); + if (*buf == NULL) { + rc = -ENOMEM; + goto out; + } + memcpy(*buf, rcd->data, len - sizeof(*rcd)); *id = record_id; if (uuid_le_cmp(rcd->sec_hdr.section_type, CPER_SECTION_TYPE_DMESG) == 0) @@ -1037,6 +1049,7 @@ skip: time->tv_nsec = 0; out: + kfree(rcd); return (rc < 0) ? rc : (len - sizeof(*rcd)); } diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 8370f72..a54a6b9 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -457,7 +457,8 @@ static int efi_pstore_close(struct pstore_info *psi) } static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, - struct timespec *timespec, struct pstore_info *psi) + struct timespec *timespec, + char **buf, struct pstore_info *psi) { efi_guid_t vendor = LINUX_EFI_CRASH_GUID; struct efivars *efivars = psi->data; @@ -478,7 +479,11 @@ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, timespec->tv_nsec = 0; get_var_data_locked(efivars, &efivars->walk_entry->var); size = efivars->walk_entry->var.DataSize; - memcpy(psi->buf, efivars->walk_entry->var.Data, size); + *buf = kmalloc(size, GFP_KERNEL); + if (*buf == NULL) + return -ENOMEM; + memcpy(*buf, efivars->walk_entry->var.Data, + size); efivars->walk_entry = list_entry(efivars->walk_entry->list.next, struct efivar_entry, list); return size; diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index 2bd620f..57bbf90 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -167,6 +167,7 @@ int pstore_register(struct pstore_info *psi) } psinfo = psi; + mutex_init(&psinfo->read_mutex); spin_unlock(&pstore_lock); if (owner && !try_module_get(owner)) { @@ -195,30 +196,32 @@ EXPORT_SYMBOL_GPL(pstore_register); void pstore_get_records(int quiet) { struct pstore_info *psi = psinfo; + char *buf = NULL; ssize_t size; u64 id; enum pstore_type_id type; struct timespec time; int failed = 0, rc; - unsigned long flags; if (!psi) return; - spin_lock_irqsave(&psinfo->buf_lock, flags); + mutex_lock(&psi->read_mutex); rc = psi->open(psi); if (rc) goto out; - while ((size = psi->read(&id, &type, &time, psi)) > 0) { - rc = pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size, + while ((size = psi->read(&id, &type, &time, &buf, psi)) > 0) { + rc = pstore_mkfile(type, psi->name, id, buf, (size_t)size, time, psi); + kfree(buf); + buf = NULL; if (rc && (rc != -EEXIST || !quiet)) failed++; } psi->close(psi); out: - spin_unlock_irqrestore(&psinfo->buf_lock, flags); + mutex_unlock(&psi->read_mutex); if (failed) printk(KERN_WARNING "pstore: failed to load %d record(s) from '%s'\n", diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ea56732..2ca8cde 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -35,10 +35,12 @@ struct pstore_info { spinlock_t buf_lock; /* serialize access to 'buf' */ char *buf; size_t bufsize; + struct mutex read_mutex; /* serialize open/read/close */ int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); int (*write)(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, -- cgit v0.10.2 From 04b38670cf46c096705f24e92a8747d1ab89e53c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Nov 2011 10:58:03 +0100 Subject: drm/i915: Fix inconsistent backlight level during disabled When the brightness property is inquired while the backlight is disabled, the driver returns a wrong value (zero) because it probes the value after the backlight was turned off. This caused a black screen even after the backlight is enabled again. It should return the internal backlight_level instead, so that it won't be influenced by the backlight-enable state. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=41926 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/872652 Tested-by: Kamal Mostafa Cc: Alex Davis Cc: Signed-off-by: Takashi Iwai Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 499d4c0..21f60b7 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -326,7 +326,8 @@ static int intel_panel_update_status(struct backlight_device *bd) static int intel_panel_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); - return intel_panel_get_backlight(dev); + struct drm_i915_private *dev_priv = dev->dev_private; + return dev_priv->backlight_level; } static const struct backlight_ops intel_panel_bl_ops = { -- cgit v0.10.2 From 38ff1edb52f737d490126728e3d5ba2b8d2f3ba0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Thu, 17 Nov 2011 02:58:55 +0000 Subject: f_phonet: fix page offset of first received fragment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We pull one byte (the MAC header) from the first fragment before the fragment is actually appended. So the socket buffer length is 1, not 0. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 3490770..16a509a 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -346,7 +346,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req) } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - skb->len == 0, req->actual); + skb->len <= 1, req->actual); page = NULL; if (req->actual < req->length) { /* Last fragment */ -- cgit v0.10.2 From d004e024058a0eaca097513ce62cbcf978913e0a Mon Sep 17 00:00:00 2001 From: Hector Palacios Date: Mon, 14 Nov 2011 11:15:25 +0100 Subject: timekeeping: add arch_offset hook to ktime_get functions ktime_get and ktime_get_ts were calling timekeeping_get_ns() but later they were not calling arch_gettimeoffset() so architectures using this mechanism returned 0 ns when calling these functions. This happened for example when running Busybox's ping which calls syscall(__NR_clock_gettime, CLOCK_MONOTONIC, ts) which eventually calls ktime_get. As a result the returned ping travel time was zero. CC: stable@kernel.org Signed-off-by: Hector Palacios Signed-off-by: John Stultz diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e9f60d3..2378413 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -249,6 +249,8 @@ ktime_t ktime_get(void) secs = xtime.tv_sec + wall_to_monotonic.tv_sec; nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec; nsecs += timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); /* @@ -280,6 +282,8 @@ void ktime_get_ts(struct timespec *ts) *ts = xtime; tomono = wall_to_monotonic; nsecs = timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); -- cgit v0.10.2 From 4a8bb7e27fbb68da888b55f26defd2855225b2d5 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 15 Nov 2011 06:44:42 +0000 Subject: bonding: Don't allow mode change via sysfs with slaves present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When changing mode via bonding's sysfs, the slaves are not initialized correctly. Forbid to change modes with slaves present to ensure that every slave is initialized correctly via bond_enslave(). Signed-off-by: Veaceslav Falico Signed-off-by: Andy Gospodarek Acked-by: Nicolas de Pesloüan Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 5a20804..4ef7e2f 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -319,6 +319,13 @@ static ssize_t bonding_store_mode(struct device *d, goto out; } + if (bond->slave_cnt > 0) { + pr_err("unable to update mode of %s because it has slaves.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + new_value = bond_parse_parm(buf, bond_mode_tbl); if (new_value < 0) { pr_err("%s: Ignoring invalid mode value %.*s.\n", -- cgit v0.10.2 From 3e37fd3153ac95088a74f5e7c569f7567e9f993a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2011 18:17:59 -0800 Subject: sparc: Kill custom io_remap_pfn_range(). To handle the large physical addresses, just make a simple wrapper around remap_pfn_range() like MIPS does. Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h index 5b31a8e..a790cc6 100644 --- a/arch/sparc/include/asm/pgtable_32.h +++ b/arch/sparc/include/asm/pgtable_32.h @@ -431,10 +431,6 @@ extern unsigned long *sparc_valid_addr_bitmap; #define kern_addr_valid(addr) \ (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap)) -extern int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long from, unsigned long pfn, - unsigned long size, pgprot_t prot); - /* * For sparc32&64, the pfn in io_remap_pfn_range() carries in * its high 4 bits. These macros/functions put it there or get it from there. @@ -443,6 +439,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, #define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) #define GET_PFN(pfn) (pfn & 0x0fffffffUL) +extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long, + unsigned long, pgprot_t); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot) +{ + unsigned long long offset, space, phys_base; + + offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT; + space = GET_IOSPACE(pfn); + phys_base = offset | (space << 32ULL); + + return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot); +} + #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ ({ \ diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index adf8932..38ebb2c 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -757,10 +757,6 @@ static inline bool kern_addr_valid(unsigned long addr) extern int page_in_phys_avail(unsigned long paddr); -extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, - unsigned long size, pgprot_t prot); - /* * For sparc32&64, the pfn in io_remap_pfn_range() carries in * its high 4 bits. These macros/functions put it there or get it from there. @@ -769,6 +765,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, #define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) #define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL) +extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long, + unsigned long, pgprot_t); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot) +{ + unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; + int space = GET_IOSPACE(pfn); + unsigned long phys_base; + + phys_base = offset | (((unsigned long) space) << 32UL); + + return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot); +} + #include /* We provide our own get_unmapped_area to cope with VA holes and diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile index e3cda21..301421c 100644 --- a/arch/sparc/mm/Makefile +++ b/arch/sparc/mm/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_SPARC64) += ultra.o tlb.o tsb.o gup.o obj-y += fault_$(BITS).o obj-y += init_$(BITS).o obj-$(CONFIG_SPARC32) += loadmmu.o -obj-y += generic_$(BITS).o obj-$(CONFIG_SPARC32) += extable.o btfixup.o srmmu.o iommu.o io-unit.o obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o obj-$(CONFIG_SPARC_LEON)+= leon_mm.o diff --git a/arch/sparc/mm/generic_32.c b/arch/sparc/mm/generic_32.c deleted file mode 100644 index 6ca39a6..0000000 --- a/arch/sparc/mm/generic_32.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * generic.c: Generic Sparc mm routines that are not dependent upon - * MMU type but are Sparc specific. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* Remap IO memory, the same way as remap_pfn_range(), but use - * the obio memory space. - * - * They use a pgprot that sets PAGE_IO and does not check the - * mem_map table as this is independent of normal memory. - */ -static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - do { - set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space)); - address += PAGE_SIZE; - offset += PAGE_SIZE; - pte++; - } while (address < end); -} - -static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - offset -= address; - do { - pte_t *pte = pte_alloc_map(mm, NULL, pmd, address); - if (!pte) - return -ENOMEM; - io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address < end); - return 0; -} - -int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, unsigned long size, pgprot_t prot) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - int space = GET_IOSPACE(pfn); - unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; - - /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; - vma->vm_pgoff = (offset >> PAGE_SHIFT) | - ((unsigned long)space << 28UL); - - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - while (from < end) { - pmd_t *pmd = pmd_alloc(mm, dir, from); - error = -ENOMEM; - if (!pmd) - break; - error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - - flush_tlb_range(vma, beg, end); - return error; -} -EXPORT_SYMBOL(io_remap_pfn_range); diff --git a/arch/sparc/mm/generic_64.c b/arch/sparc/mm/generic_64.c deleted file mode 100644 index 9b357dd..0000000 --- a/arch/sparc/mm/generic_64.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * generic.c: Generic Sparc mm routines that are not dependent upon - * MMU type but are Sparc specific. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Remap IO memory, the same way as remap_pfn_range(), but use - * the obio memory space. - * - * They use a pgprot that sets PAGE_IO and does not check the - * mem_map table as this is independent of normal memory. - */ -static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, - unsigned long address, - unsigned long size, - unsigned long offset, pgprot_t prot, - int space) -{ - unsigned long end; - - /* clear hack bit that was used as a write_combine side-effect flag */ - offset &= ~0x1UL; - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - do { - pte_t entry; - unsigned long curend = address + PAGE_SIZE; - - entry = mk_pte_io(offset, prot, space, PAGE_SIZE); - if (!(address & 0xffff)) { - if (PAGE_SIZE < (4 * 1024 * 1024) && - !(address & 0x3fffff) && - !(offset & 0x3ffffe) && - end >= address + 0x400000) { - entry = mk_pte_io(offset, prot, space, - 4 * 1024 * 1024); - curend = address + 0x400000; - offset += 0x400000; - } else if (PAGE_SIZE < (512 * 1024) && - !(address & 0x7ffff) && - !(offset & 0x7fffe) && - end >= address + 0x80000) { - entry = mk_pte_io(offset, prot, space, - 512 * 1024 * 1024); - curend = address + 0x80000; - offset += 0x80000; - } else if (PAGE_SIZE < (64 * 1024) && - !(offset & 0xfffe) && - end >= address + 0x10000) { - entry = mk_pte_io(offset, prot, space, - 64 * 1024); - curend = address + 0x10000; - offset += 0x10000; - } else - offset += PAGE_SIZE; - } else - offset += PAGE_SIZE; - - if (pte_write(entry)) - entry = pte_mkdirty(entry); - do { - BUG_ON(!pte_none(*pte)); - set_pte_at(mm, address, pte, entry); - address += PAGE_SIZE; - pte_val(entry) += PAGE_SIZE; - pte++; - } while (address < curend); - } while (address < end); -} - -static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - offset -= address; - do { - pte_t *pte = pte_alloc_map(mm, NULL, pmd, address); - if (!pte) - return -ENOMEM; - io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space); - pte_unmap(pte); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address < end); - return 0; -} - -static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size, - unsigned long offset, pgprot_t prot, int space) -{ - unsigned long end; - - address &= ~PUD_MASK; - end = address + size; - if (end > PUD_SIZE) - end = PUD_SIZE; - offset -= address; - do { - pmd_t *pmd = pmd_alloc(mm, pud, address); - if (!pud) - return -ENOMEM; - io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space); - address = (address + PUD_SIZE) & PUD_MASK; - pud++; - } while (address < end); - return 0; -} - -int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long pfn, unsigned long size, pgprot_t prot) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - int space = GET_IOSPACE(pfn); - unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT; - unsigned long phys_base; - - phys_base = offset | (((unsigned long) space) << 32UL); - - /* See comment in mm/memory.c remap_pfn_range */ - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; - vma->vm_pgoff = phys_base >> PAGE_SHIFT; - - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - while (from < end) { - pud_t *pud = pud_alloc(mm, dir, from); - error = -ENOMEM; - if (!pud) - break; - error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - - flush_tlb_range(vma, beg, end); - return error; -} -EXPORT_SYMBOL(io_remap_pfn_range); -- cgit v0.10.2 From 738a849c8eef4787a526d95763f985b8c1cb68e4 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 17 Nov 2011 14:37:23 +0000 Subject: sky2: enforce minimum ring size The hardware has a restriction that the minimum ring size possible is 128. The number of elements used is controlled by tx_pending and the overall number of elements in the ring tx_ring_size, therefore it is okay to limit the number of elements in use to a small value (63) but still provide a bigger ring. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 539de09..d996871 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4088,6 +4088,16 @@ static int sky2_set_coalesce(struct net_device *dev, return 0; } +/* + * Hardware is limited to min of 128 and max of 2048 for ring size + * and rounded up to next power of two + * to avoid division in modulus calclation + */ +static unsigned long roundup_ring_size(unsigned long pending) +{ + return max(128ul, roundup_pow_of_two(pending+1)); +} + static void sky2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { @@ -4115,7 +4125,7 @@ static int sky2_set_ringparam(struct net_device *dev, sky2->rx_pending = ering->rx_pending; sky2->tx_pending = ering->tx_pending; - sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1); + sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending); return sky2_reattach(dev); } @@ -4709,7 +4719,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; - sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1); + sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING); sky2->rx_pending = RX_DEF_PENDING; hw->dev[port] = dev; -- cgit v0.10.2 From 282edcece39e08d02c22492d593e4b9b94a65dff Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 17 Nov 2011 14:37:35 +0000 Subject: sky2: fix hang in napi_disable If IRQ was never initialized, then calling napi_disable() would hang. Add more bookkeeping to track whether IRQ was ever initialized. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index d996871..7803efa 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1723,6 +1723,8 @@ static int sky2_setup_irq(struct sky2_hw *hw, const char *name) if (err) dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); else { + hw->flags |= SKY2_HW_IRQ_SETUP; + napi_enable(&hw->napi); sky2_write32(hw, B0_IMSK, Y2_IS_BASE); sky2_read32(hw, B0_IMSK); @@ -2120,6 +2122,7 @@ static int sky2_close(struct net_device *dev) napi_disable(&hw->napi); free_irq(hw->pdev->irq, hw); + hw->flags &= ~SKY2_HW_IRQ_SETUP; } else { u32 imask; @@ -3423,12 +3426,13 @@ static void sky2_all_down(struct sky2_hw *hw) { int i; - sky2_read32(hw, B0_IMSK); - sky2_write32(hw, B0_IMSK, 0); + if (hw->flags & SKY2_HW_IRQ_SETUP) { + sky2_read32(hw, B0_IMSK); + sky2_write32(hw, B0_IMSK, 0); - if (hw->ports > 1 || netif_running(hw->dev[0])) synchronize_irq(hw->pdev->irq); - napi_disable(&hw->napi); + napi_disable(&hw->napi); + } for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; @@ -3445,7 +3449,7 @@ static void sky2_all_down(struct sky2_hw *hw) static void sky2_all_up(struct sky2_hw *hw) { - u32 imask = 0; + u32 imask = Y2_IS_BASE; int i; for (i = 0; i < hw->ports; i++) { @@ -3461,8 +3465,7 @@ static void sky2_all_up(struct sky2_hw *hw) netif_wake_queue(dev); } - if (imask || hw->ports > 1) { - imask |= Y2_IS_BASE; + if (hw->flags & SKY2_HW_IRQ_SETUP) { sky2_write32(hw, B0_IMSK, imask); sky2_read32(hw, B0_IMSK); sky2_read32(hw, B0_Y2_SP_LISR); diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index 0af31b8..ff6f58b 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2287,6 +2287,7 @@ struct sky2_hw { #define SKY2_HW_RSS_BROKEN 0x00000100 #define SKY2_HW_VLAN_BROKEN 0x00000200 #define SKY2_HW_RSS_CHKSUM 0x00000400 /* RSS requires chksum */ +#define SKY2_HW_IRQ_SETUP 0x00000800 u8 chip_id; u8 chip_rev; -- cgit v0.10.2 From 0b64120cceb86e93cb1bda0dc055f13016646907 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2011 22:44:58 -0800 Subject: sparc64: Patch sun4v code sequences properly on module load. Some of the sun4v code patching occurs in inline functions visible to, and usable by, modules. Therefore we have to patch them up during module load. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h index e27f8ea..0c218e4 100644 --- a/arch/sparc/kernel/entry.h +++ b/arch/sparc/kernel/entry.h @@ -42,6 +42,9 @@ extern void fpsave(unsigned long *fpregs, unsigned long *fsr, extern void fpload(unsigned long *fpregs, unsigned long *fsr); #else /* CONFIG_SPARC32 */ + +#include + struct popc_3insn_patch_entry { unsigned int addr; unsigned int insns[3]; @@ -57,6 +60,10 @@ extern struct popc_6insn_patch_entry __popc_6insn_patch, __popc_6insn_patch_end; extern void __init per_cpu_patch(void); +extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *, + struct sun4v_1insn_patch_entry *); +extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *, + struct sun4v_2insn_patch_entry *); extern void __init sun4v_patch(void); extern void __init boot_cpu_id_too_large(int cpu); extern unsigned int dcache_parity_tl1_occurred; diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index da0c6c7..e551987 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -17,6 +17,8 @@ #include #include +#include "entry.h" + #ifdef CONFIG_SPARC64 #include @@ -203,6 +205,29 @@ int apply_relocate_add(Elf_Shdr *sechdrs, } #ifdef CONFIG_SPARC64 +static void do_patch_sections(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs) +{ + const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name)) + sun4v_1insn = s; + if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name)) + sun4v_2insn = s; + } + + if (sun4v_1insn && tlb_type == hypervisor) { + void *p = (void *) sun4v_1insn->sh_addr; + sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size); + } + if (sun4v_2insn && tlb_type == hypervisor) { + void *p = (void *) sun4v_2insn->sh_addr; + sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size); + } +} + int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) @@ -210,6 +235,8 @@ int module_finalize(const Elf_Ehdr *hdr, /* make jump label nops */ jump_label_apply_nops(me); + do_patch_sections(hdr, sechdrs); + /* Cheetah's I-cache is fully coherent. */ if (tlb_type == spitfire) { unsigned long va; diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index c965595a..a854a1c 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -234,40 +234,50 @@ void __init per_cpu_patch(void) } } -void __init sun4v_patch(void) +void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start, + struct sun4v_1insn_patch_entry *end) { - extern void sun4v_hvapi_init(void); - struct sun4v_1insn_patch_entry *p1; - struct sun4v_2insn_patch_entry *p2; - - if (tlb_type != hypervisor) - return; + while (start < end) { + unsigned long addr = start->addr; - p1 = &__sun4v_1insn_patch; - while (p1 < &__sun4v_1insn_patch_end) { - unsigned long addr = p1->addr; - - *(unsigned int *) (addr + 0) = p1->insn; + *(unsigned int *) (addr + 0) = start->insn; wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - p1++; + start++; } +} - p2 = &__sun4v_2insn_patch; - while (p2 < &__sun4v_2insn_patch_end) { - unsigned long addr = p2->addr; +void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start, + struct sun4v_2insn_patch_entry *end) +{ + while (start < end) { + unsigned long addr = start->addr; - *(unsigned int *) (addr + 0) = p2->insns[0]; + *(unsigned int *) (addr + 0) = start->insns[0]; wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - *(unsigned int *) (addr + 4) = p2->insns[1]; + *(unsigned int *) (addr + 4) = start->insns[1]; wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 4)); - p2++; + start++; } +} + +void __init sun4v_patch(void) +{ + extern void sun4v_hvapi_init(void); + + if (tlb_type != hypervisor) + return; + + sun4v_patch_1insn_range(&__sun4v_1insn_patch, + &__sun4v_1insn_patch_end); + + sun4v_patch_2insn_range(&__sun4v_2insn_patch, + &__sun4v_2insn_patch_end); sun4v_hvapi_init(); } -- cgit v0.10.2 From ef319c6e095676e0247fd24ef8ff7f085c19744f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 20 Oct 2011 13:36:59 +0300 Subject: OMAPDSS: HDMI: fix returned HDMI pixel clock hdmi_get_pixel_clock() returns the pixel clock in Hz, but the pck is stored as kHz. This means the return value has to be multiplied by 1000, not by 10000 as the code did. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index 3262f0f..c56378c 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -269,7 +269,7 @@ static void update_hdmi_timings(struct hdmi_config *cfg, unsigned long hdmi_get_pixel_clock(void) { /* HDMI Pixel Clock in Mhz */ - return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000; + return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000; } static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy, -- cgit v0.10.2 From 1c6bc899723ca8c0d58044c3661f13ac2369e55f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Nov 2011 09:54:50 +0200 Subject: OMAPFB: fix compilation warnings due to missing include Fix warnings similar to this by including module.h: drivers/video/omap/dispc.c:276:1: warning: data definition has no type or storage class drivers/video/omap/dispc.c:276:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 0ccd7ad..6f61e78 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -19,6 +19,7 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include +#include #include #include #include -- cgit v0.10.2 From f95cb5ebd834117ff4829a460656095a0ae63921 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 1 Nov 2011 10:50:45 +0200 Subject: OMAPDSS: DISPC: skip scaling calculations when not scaling Current code calculates scaling factors for video overlays even when the overlays are not scaled. Change the code to skip calculations when not scaling. This optimizes the code a bit, but also fixes a problem when configuring an overlay for a disabled display: if the display is disabled we don't necessarily know the pixel clock used when the display is enabled, and in some cases (like HDMI) the pixel clock is set to zero until a proper video mode is set later. A wrong pixel clock will mess up the scaling calculations, causing an error like: omapdss DISPC error: failed to set up scaling, required fclk rate = 0 Hz, current fclk rate = 170666666 Hz A proper fix would be to check later whether the clocks are enough for the scaling, at the point when the overlay or display is actually enabled, but this patch removes the problem for now. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 3532782..5c81533 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1720,12 +1720,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane, const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE); unsigned long fclk = 0; - if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { - if (width != out_width || height != out_height) - return -EINVAL; - else - return 0; - } + if (width == out_width && height == out_height) + return 0; + + if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) + return -EINVAL; if (out_width < width / maxdownscale || out_width > width * 8) -- cgit v0.10.2 From f9dfb65b055c56678afa03e13e942761459ea53d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 18 Nov 2011 17:05:30 +0530 Subject: ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent Signed-off-by: Steven Rostedt diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 30e2bef..8b4c253 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -747,6 +747,18 @@ sub __eval_option { # Add space to evaluate the character before $ $option = " $option"; my $retval = ""; + my $repeated = 0; + my $parent = 0; + + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + + $repeated = 1; + $parent = $test; + last; + } + } while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { my $start = $1; @@ -760,10 +772,14 @@ sub __eval_option { # otherwise see if the default OPT (without [$i]) exists. my $o = "$var\[$i\]"; + my $parento = "$var\[$parent\]"; if (defined($opt{$o})) { $o = $opt{$o}; $retval = "$retval$o"; + } elsif ($repeated && defined($opt{$parento})) { + $o = $opt{$parento}; + $retval = "$retval$o"; } elsif (defined($opt{$var})) { $o = $opt{$var}; $retval = "$retval$o"; -- cgit v0.10.2 From 91a13c281d7d4648c0b32dede11a0144c4e7984c Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 17 Nov 2011 11:08:32 +0100 Subject: drivers/base/node.c: fix compilation error with older versions of gcc Patch to fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Acked-by: David Rientjes Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/node.c b/drivers/base/node.c index 793f796..5693ece 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_WRITEBACK)), nid, K(node_page_state(nid, NR_FILE_PAGES)), nid, K(node_page_state(nid, NR_FILE_MAPPED)), - nid, K(node_page_state(nid, NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_ANON_PAGES) + node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + nid, K(node_page_state(nid, NR_ANON_PAGES)), #endif - ), nid, K(node_page_state(nid, NR_SHMEM)), nid, node_page_state(nid, NR_KERNEL_STACK) * THREAD_SIZE / 1024, @@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) + node_page_state(nid, NR_SLAB_UNRECLAIMABLE)), nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)), - nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) , nid, K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR) + HPAGE_PMD_NR)); +#else + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))); #endif - ); n += hugetlb_report_node_meminfo(nid, buf + n); return n; } -- cgit v0.10.2 From 6ac2afb3f4601d74778a6ef76c50813a5b85b133 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 18 Nov 2011 11:05:10 +0100 Subject: misc: ad525x_dpot: Fix AD8400 spi transfer size. AD8400 type devices require 16-bit command transfers. Signed-off-by: Michael Hennerich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h index a662f59..82b2cb7 100644 --- a/drivers/misc/ad525x_dpot.h +++ b/drivers/misc/ad525x_dpot.h @@ -100,7 +100,7 @@ enum dpot_devid { AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27), AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, BRDAC0, 7, 28), - AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT, + AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0, 8, 29), AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT, BRDAC0 | BRDAC1, 8, 30), -- cgit v0.10.2 From e253dec31b3ffc2bf19aa8c29865ab7254e90c29 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Fri, 18 Nov 2011 12:12:41 +0530 Subject: usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c index fe74bd6..b4fb511 100644 --- a/drivers/usb/host/ehci-xls.c +++ b/drivers/usb/host/ehci-xls.c @@ -19,7 +19,7 @@ static int ehci_xls_setup(struct usb_hcd *hcd) ehci->caps = hcd->regs; ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); dbg_hcs_params(ehci, "reset"); dbg_hcc_params(ehci, "reset"); -- cgit v0.10.2 From 46b5a277ed90317a4d17e936c16037e76011b219 Mon Sep 17 00:00:00 2001 From: "zheng.zhijian@zte.com.cn" Date: Thu, 17 Nov 2011 19:23:25 +0800 Subject: USB: option: release new PID for ZTE 3G modem This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng Signed-off-by: wsalvin Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b8da93b..d59e375 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -316,6 +316,9 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -504,6 +507,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -1047,6 +1062,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ -- cgit v0.10.2 From c61875977458637226ab093a35d200f2d5789787 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2011 16:41:45 -0500 Subject: OHCI: final fix for NVIDIA problems (I hope) Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern Tested-by: Andre "Osku" Schmidt Tested-by: Arno Augustin Cc: stable [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34efd47..b263919 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd) struct ohci_hcd *ohci; ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); - /* If the SHUTDOWN quirk is set, don't put the controller in RESET */ - ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ? - OHCI_CTRL_RWC | OHCI_CTRL_HCFS : - OHCI_CTRL_RWC); - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); - /* flush the writes */ - (void) ohci_readl (ohci, &ohci->regs->control); + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); } static int check_ed(struct ohci_hcd *ohci, struct ed *ed) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index ad8166c..bc01b06 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } -/* nVidia controllers continue to drive Reset signalling on the bus - * even after system shutdown, wasting power. This flag tells the - * shutdown routine to leave the controller OPERATIONAL instead of RESET. - */ -static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) -{ - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - /* Evidently nVidia fixed their later hardware; this is a guess at - * the changeover point. - */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d - - if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) { - ohci->flags |= OHCI_QUIRK_SHUTDOWN; - ohci_dbg(ohci, "enabled nVidia shutdown quirk\n"); - } - - return 0; -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; @@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, - { - PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), - .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown, - }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 35e5fd6..0795b93 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -403,7 +403,6 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ -#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c7fd6ce..caf8742 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -37,6 +37,7 @@ #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_FMINTERVAL 0x34 +#define OHCI_HCFS (3 << 6) /* hc functional state */ #define OHCI_HCR (1 << 0) /* host controller reset */ #define OHCI_OCR (1 << 3) /* ownership change request */ #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ @@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; + u32 fminterval; + int cnt; if (!mmio_resource_enabled(pdev, 0)) return; @@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) } #endif - /* reset controller, preserving RWC (and possibly IR) */ - writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); - readl(base + OHCI_CONTROL); + /* disable interrupts */ + writel((u32) ~0, base + OHCI_INTRDISABLE); - /* Some NVIDIA controllers stop working if kept in RESET for too long */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { - u32 fminterval; - int cnt; + /* Reset the USB bus, if the controller isn't already in RESET */ + if (control & OHCI_HCFS) { + /* Go into RESET, preserving RWC (and possibly IR) */ + writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); + readl(base + OHCI_CONTROL); - /* drive reset for at least 50 ms (7.1.7.5) */ + /* drive bus reset for at least 50 ms (7.1.7.5) */ msleep(50); + } - /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); - writel(OHCI_HCR, base + OHCI_CMDSTATUS); + /* software reset of the controller, preserving HcFmInterval */ + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); - /* reset requires max 10 us delay */ - for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ - if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) - break; - udelay(1); - } - writel(fminterval, base + OHCI_FMINTERVAL); - - /* Now we're in the SUSPEND state with all devices reset - * and wakeups and interrupts disabled - */ + /* reset requires max 10 us delay */ + for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ + if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) + break; + udelay(1); } + writel(fminterval, base + OHCI_FMINTERVAL); - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); - + /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); } -- cgit v0.10.2 From 4aa3648c719265bac9c2742c9ebb043e6dbdd790 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Thu, 17 Nov 2011 16:44:58 +0100 Subject: USB: option: add PID of Huawei E173s 3G modem Signed-off-by: Ferenc Wagner Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d59e375..d865878 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 +#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -641,6 +642,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), -- cgit v0.10.2 From b1ffb4c851f185e9051ba837c16d9b84ef688d26 Mon Sep 17 00:00:00 2001 From: Andrew Worsley Date: Fri, 18 Nov 2011 23:13:33 +1100 Subject: USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley Cc: stable ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fe034d..bd4298b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, -- cgit v0.10.2 From fb120c0a2775b0d2d095a99ea8432bfb5d444ab2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Nov 2011 04:40:20 +0000 Subject: ping: dont increment ICMP_MIB_INERRORS ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a frame not belonging to its own sockets. RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP messages which the entiry received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." Signed-off-by: Eric Dumazet CC: Vasiliy Kulikov Acked-by: Flavio Leitner Acked-by: Vasiliy Kulikov Signed-off-by: David S. Miller diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index a06f73f..43d4c3b 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -339,7 +339,6 @@ void ping_err(struct sk_buff *skb, u32 info) sk = ping_v4_lookup(net, iph->daddr, iph->saddr, ntohs(icmph->un.echo.id), skb->dev->ifindex); if (sk == NULL) { - ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS); pr_debug("no socket, dropping\n"); return; /* No socket for error */ } @@ -679,7 +678,6 @@ static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n", inet_sk(sk), inet_sk(sk)->inet_num, skb); if (sock_queue_rcv_skb(sk, skb) < 0) { - ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS); kfree_skb(skb); pr_debug("ping_queue_rcv_skb -> failed\n"); return -1; -- cgit v0.10.2 From c8891329131f791e0ddc422eaf6fc86e9a8cf8f5 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 18 Nov 2011 17:21:05 +0000 Subject: MAINTAINERS: update XFS maintainer entry I will no longer be maintaining XFS for SGI. Ben Myers (bpm@sgi.com) has agreed to be the primary maintainer for XFS in my place. I will continue to be able to push commits to the SGI XFS tree if required. As such I will continue to be a designated XFS maintainer, but plan to serve in more of a backup role. Signed-off-by: Alex Elder Signed-off-by: Ben Myers diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..227cd7c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7425,7 +7425,8 @@ F: drivers/xen/*swiotlb* XFS FILESYSTEM P: Silicon Graphics Inc -M: Alex Elder +M: Ben Myers +M: Alex Elder M: xfs-masters@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs -- cgit v0.10.2 From 9cc20b268a5a14f5e57b8ad405a83513ab0d78dc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 18 Nov 2011 15:24:32 -0500 Subject: ipv4: fix redirect handling commit f39925dbde77 (ipv4: Cache learned redirect information in inetpeer.) introduced a regression in ICMP redirect handling. It assumed ipv4_dst_check() would be called because all possible routes were attached to the inetpeer we modify in ip_rt_redirect(), but thats not true. commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix this but solution was not complete. (It fixed only one route) So we must lookup existing routes (including different TOS values) and call check_peer_redir() on them. Reported-by: Ivan Zahariev Signed-off-by: Eric Dumazet CC: Flavio Leitner Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 511f4a7..0c74da8 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1304,16 +1304,42 @@ static void rt_del(unsigned hash, struct rtable *rt) spin_unlock_bh(rt_hash_lock_addr(hash)); } +static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) +{ + struct rtable *rt = (struct rtable *) dst; + __be32 orig_gw = rt->rt_gateway; + struct neighbour *n, *old_n; + + dst_confirm(&rt->dst); + + rt->rt_gateway = peer->redirect_learned.a4; + + n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); + if (IS_ERR(n)) + return PTR_ERR(n); + old_n = xchg(&rt->dst._neighbour, n); + if (old_n) + neigh_release(old_n); + if (!n || !(n->nud_state & NUD_VALID)) { + if (n) + neigh_event_send(n, NULL); + rt->rt_gateway = orig_gw; + return -EAGAIN; + } else { + rt->rt_flags |= RTCF_REDIRECTED; + call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); + } + return 0; +} + /* called in rcu_read_lock() section */ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, __be32 saddr, struct net_device *dev) { int s, i; struct in_device *in_dev = __in_dev_get_rcu(dev); - struct rtable *rt; __be32 skeys[2] = { saddr, 0 }; int ikeys[2] = { dev->ifindex, 0 }; - struct flowi4 fl4; struct inet_peer *peer; struct net *net; @@ -1336,33 +1362,42 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, goto reject_redirect; } - memset(&fl4, 0, sizeof(fl4)); - fl4.daddr = daddr; for (s = 0; s < 2; s++) { for (i = 0; i < 2; i++) { - fl4.flowi4_oif = ikeys[i]; - fl4.saddr = skeys[s]; - rt = __ip_route_output_key(net, &fl4); - if (IS_ERR(rt)) - continue; - - if (rt->dst.error || rt->dst.dev != dev || - rt->rt_gateway != old_gw) { - ip_rt_put(rt); - continue; - } + unsigned int hash; + struct rtable __rcu **rthp; + struct rtable *rt; + + hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net)); + + rthp = &rt_hash_table[hash].chain; + + while ((rt = rcu_dereference(*rthp)) != NULL) { + rthp = &rt->dst.rt_next; + + if (rt->rt_key_dst != daddr || + rt->rt_key_src != skeys[s] || + rt->rt_oif != ikeys[i] || + rt_is_input_route(rt) || + rt_is_expired(rt) || + !net_eq(dev_net(rt->dst.dev), net) || + rt->dst.error || + rt->dst.dev != dev || + rt->rt_gateway != old_gw) + continue; - if (!rt->peer) - rt_bind_peer(rt, rt->rt_dst, 1); + if (!rt->peer) + rt_bind_peer(rt, rt->rt_dst, 1); - peer = rt->peer; - if (peer) { - peer->redirect_learned.a4 = new_gw; - atomic_inc(&__rt_peer_genid); + peer = rt->peer; + if (peer) { + if (peer->redirect_learned.a4 != new_gw) { + peer->redirect_learned.a4 = new_gw; + atomic_inc(&__rt_peer_genid); + } + check_peer_redir(&rt->dst, peer); + } } - - ip_rt_put(rt); - return; } } return; @@ -1649,33 +1684,6 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } } -static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) -{ - struct rtable *rt = (struct rtable *) dst; - __be32 orig_gw = rt->rt_gateway; - struct neighbour *n, *old_n; - - dst_confirm(&rt->dst); - - rt->rt_gateway = peer->redirect_learned.a4; - - n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); - if (IS_ERR(n)) - return PTR_ERR(n); - old_n = xchg(&rt->dst._neighbour, n); - if (old_n) - neigh_release(old_n); - if (!n || !(n->nud_state & NUD_VALID)) { - if (n) - neigh_event_send(n, NULL); - rt->rt_gateway = orig_gw; - return -EAGAIN; - } else { - rt->rt_flags |= RTCF_REDIRECTED; - call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); - } - return 0; -} static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) { -- cgit v0.10.2 From aa9a7b11821e883a7b93ecce190881e0ea48648b Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Fri, 18 Nov 2011 23:02:42 +0100 Subject: PM / Hibernate: Fix the early termination of test modes Commit 2aede851ddf08666f68ffc17be446420e9d2a056 (PM / Hibernate: Freeze kernel threads after preallocating memory) postponed the freezing of kernel threads to after preallocating memory for hibernation. But while doing that, the hibernation test TEST_FREEZER and the test mode HIBERNATION_TESTPROC were not moved accordingly. As a result, when using these test modes, it only goes upto the freezing of userspace and exits, when in fact it should go till the complete end of task freezing stage, namely the freezing of kernel threads as well. So, move these points of exit to appropriate places so that freezing of kernel threads is also tested while using these test harnesses. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index b4511b6..196c0126 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -55,6 +55,8 @@ enum { static int hibernation_mode = HIBERNATION_SHUTDOWN; +static bool freezer_test_done; + static const struct platform_hibernation_ops *hibernation_ops; /** @@ -347,6 +349,17 @@ int hibernation_snapshot(int platform_mode) if (error) goto Close; + if (hibernation_test(TEST_FREEZER) || + hibernation_testmode(HIBERNATION_TESTPROC)) { + + /* + * Indicate to the caller that we are returning due to a + * successful freezer test. + */ + freezer_test_done = true; + goto Close; + } + error = dpm_prepare(PMSG_FREEZE); if (error) goto Complete_devices; @@ -641,15 +654,13 @@ int hibernate(void) if (error) goto Finish; - if (hibernation_test(TEST_FREEZER)) - goto Thaw; - - if (hibernation_testmode(HIBERNATION_TESTPROC)) - goto Thaw; - error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM); if (error) goto Thaw; + if (freezer_test_done) { + freezer_test_done = false; + goto Thaw; + } if (in_suspend) { unsigned int flags = 0; -- cgit v0.10.2 From 860ca0e6f72d21ded33ce14be9a53eb103f88441 Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Fri, 18 Nov 2011 14:22:09 -0800 Subject: cgroup: Replace Paul Menage with Tejun Heo as cgroups maintainer As is probably painfully obvious, I don't have time to be a cgroups maintainer. Rather than have me continue to hope that I'll magically find more spare time, instead Tejun has kindly agreed to take over the role, along with Li Zefan. -tj: added cgroup tree URL to MAINTAINERS file Signed-off-by: Paul Menage Acked-by: Li Zefan Signed-off-by: Tejun Heo LKML-Reference: <1321320612-57855-1-git-send-email-paul@paulmenage.org> diff --git a/MAINTAINERS b/MAINTAINERS index 7f6bc29..78751bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1927,10 +1927,11 @@ S: Maintained F: drivers/connector/ CONTROL GROUPS (CGROUPS) -M: Paul Menage +M: Tejun Heo M: Li Zefan L: containers@lists.linux-foundation.org L: cgroups@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained F: include/linux/cgroup* F: kernel/cgroup* -- cgit v0.10.2 From 2e9ff8d917af622785b5b9f46d849b7eee43b29c Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Fri, 4 Nov 2011 17:58:02 +0000 Subject: linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled Randy Dunlap reports that the ex131x driver doesn't build when CONFIG_PM_SLEEP is not enabled. This bug was introduced when moving code around to remove some forward declarations earlier, the #endif part of #ifdef CONFIG_PM_SLEEP was not moved at the same time. Now fixed by moving it to its proper place. Reported-by: Randy Dunlap Signed-off-by: Mark Einon Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index f5f44a0..0c1c6ca 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -4469,6 +4469,12 @@ static int et131x_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); +#define ET131X_PM_OPS (&et131x_pm_ops) +#else +#define ET131X_PM_OPS NULL +#endif + /* ISR functions */ /** @@ -5470,12 +5476,6 @@ err_out: return result; } -static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); -#define ET131X_PM_OPS (&et131x_pm_ops) -#else -#define ET131X_PM_OPS NULL -#endif - static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = { { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, -- cgit v0.10.2 From 07de7a5ecbd241507bf1d521e56692842a3e70d4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Nov 2011 14:43:09 -0700 Subject: staging: slicoss depends on NET The slicoss driver uses network interfaces so it should depend on NET. Fixes the following build errors: ERROR: "eth_change_mtu" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "register_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "netif_rx" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_put" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_pull" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__alloc_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "free_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "consume_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "dev_kfree_skb_irq" [drivers/staging/slicoss/slicoss.ko] undefined! Signed-off-by: Randy Dunlap Cc: Lior Dotan Cc: Christopher Harrer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/slicoss/Kconfig b/drivers/staging/slicoss/Kconfig index 5cde96b..5c2a15b 100644 --- a/drivers/staging/slicoss/Kconfig +++ b/drivers/staging/slicoss/Kconfig @@ -1,6 +1,6 @@ config SLICOSS tristate "Alacritech Gigabit IS-NIC support" - depends on PCI && X86 + depends on PCI && X86 && NET default n help This driver supports Alacritech's IS-NIC gigabit ethernet cards. -- cgit v0.10.2 From 0337510f7cef9d569811b058a33306943c685ef6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 3 Nov 2011 14:24:00 -0700 Subject: staging: et131x depends on NET ET131X uses netdev interfaces so it should depend on NET. Fixes these build errors: ERROR: "ethtool_op_get_link" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "register_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_detach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_attach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "free_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_alloc_skb" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_rx" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "skb_put" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 9e1864c..98a1653 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,6 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI + depends on PCI && NET default n ---help--- This driver supports Agere ET-1310 ethernet adapters. -- cgit v0.10.2 From c9fb041ff13c3b7b599fce6fb63cb903d69945d6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 15 Nov 2011 17:04:12 -0800 Subject: staging: fix more ET131X build errors ET131X is a network device, so it should depend on NETDEVICES. (This part won't be needed when the driver moves to drivers/net/.) It also uses PHYLIB interfaces, so it should select PHYLIB. Fixes these build errors: ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: : Mark Einon Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig index 98a1653..8190f2a 100644 --- a/drivers/staging/et131x/Kconfig +++ b/drivers/staging/et131x/Kconfig @@ -1,6 +1,7 @@ config ET131X tristate "Agere ET-1310 Gigabit Ethernet support" - depends on PCI && NET + depends on PCI && NET && NETDEVICES + select PHYLIB default n ---help--- This driver supports Agere ET-1310 ethernet adapters. -- cgit v0.10.2 From dbd1b5473ce8ae40fe7385eacc9294355eec0676 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 19 Nov 2011 11:41:30 +0100 Subject: ALSA: hda - Add pin fix for Alienware M17x R3 Reported-by: Albert Pool Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 470f6f2..f365865 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1641,6 +1641,8 @@ static const struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = { "Alienware M17x", STAC_ALIENWARE_M17X), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a, "Alienware M17x", STAC_ALIENWARE_M17X), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0490, + "Alienware M17x", STAC_ALIENWARE_M17X), {} /* terminator */ }; -- cgit v0.10.2 From a5c86e986f0b2fe779f13cf53ce6e9f467b03950 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Sat, 19 Nov 2011 02:33:57 -0800 Subject: hugetlb: remove dummy definitions of HPAGE_MASK and HPAGE_SIZE Dummy, non-zero definitions for HPAGE_MASK and HPAGE_SIZE were added in 51c6f666fceb ("mm: ZAP_BLOCK causes redundant work") to avoid a divide by zero in generic kernel code. That code has since been removed, but probably should never have been added in the first place: we don't want HPAGE_SIZE to act like PAGE_SIZE for code that is working with hugepages, for example, when the dependency on CONFIG_HUGETLB_PAGE has not been fulfilled. Because hugepage size can differ from architecture to architecture, each is required to have their own definitions for both HPAGE_MASK and HPAGE_SIZE. This is always done in arch/*/include/asm/page.h. So, just remove the dummy and dangerous definitions since they are no longer needed and reveals the correct dependencies. Tested on architectures using the definitions with allyesconfig: x86 (even with thp), hppa, mips, powerpc, s390, sh3, sh4, sparc, and sparc64, and with defconfig on ia64. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 19644e0..d9d6c86 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -110,11 +110,6 @@ static inline void copy_huge_page(struct page *dst, struct page *src) #define hugetlb_change_protection(vma, address, end, newprot) -#ifndef HPAGE_MASK -#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */ -#define HPAGE_SIZE PAGE_SIZE -#endif - #endif /* !CONFIG_HUGETLB_PAGE */ #define HUGETLB_ANON_FILE "anon_hugepage" -- cgit v0.10.2 From 27c9cd7e601632b3794e1c3344d37b86917ffb43 Mon Sep 17 00:00:00 2001 From: Jeff Ohlstein Date: Fri, 18 Nov 2011 15:47:10 -0800 Subject: hrtimer: Fix extra wakeups from __remove_hrtimer() __remove_hrtimer() attempts to reprogram the clockevent device when the timer being removed is the next to expire. However, __remove_hrtimer() reprograms the clockevent *before* removing the timer from the timerqueue and thus when hrtimer_force_reprogram() finds the next timer to expire it finds the timer we're trying to remove. This is especially noticeable when the system switches to NOHz mode and the system tick is removed. The timer tick is removed from the system but the clockevent is programmed to wakeup in another HZ anyway. Silence the extra wakeup by removing the timer from the timerqueue before calling hrtimer_force_reprogram() so that we actually program the clockevent for the next timer to expire. This was broken by 998adc3 "hrtimers: Convert hrtimers to use timerlist infrastructure". Signed-off-by: Jeff Ohlstein Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1321660030-8520-1-git-send-email-johlstei@codeaurora.org Signed-off-by: Thomas Gleixner diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index a9205e3..2043c08 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -885,10 +885,13 @@ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, unsigned long newstate, int reprogram) { + struct timerqueue_node *next_timer; if (!(timer->state & HRTIMER_STATE_ENQUEUED)) goto out; - if (&timer->node == timerqueue_getnext(&base->active)) { + next_timer = timerqueue_getnext(&base->active); + timerqueue_del(&base->active, &timer->node); + if (&timer->node == next_timer) { #ifdef CONFIG_HIGH_RES_TIMERS /* Reprogram the clock event device. if enabled */ if (reprogram && hrtimer_hres_active()) { @@ -901,7 +904,6 @@ static void __remove_hrtimer(struct hrtimer *timer, } #endif } - timerqueue_del(&base->active, &timer->node); if (!timerqueue_getnext(&base->active)) base->cpu_base->active_bases &= ~(1 << base->index); out: -- cgit v0.10.2 From d633180c20271d3b7c1fabbccbc7c5b30ad12be4 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 18 Nov 2011 15:56:06 -0800 Subject: Xen: update MAINTAINER info No longer at Citrix, still interested in Xen. Signed-off-by: Jeremy Fitzhardinge Cc: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 48fe11c..1e7cc42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4950,7 +4950,7 @@ F: drivers/char/ppdev.c F: include/linux/ppdev.h PARAVIRT_OPS INTERFACE -M: Jeremy Fitzhardinge +M: Jeremy Fitzhardinge M: Chris Wright M: Alok Kataria M: Rusty Russell @@ -7402,8 +7402,8 @@ S: Maintained F: arch/x86/kernel/cpu/mcheck/* XEN HYPERVISOR INTERFACE -M: Jeremy Fitzhardinge M: Konrad Rzeszutek Wilk +M: Jeremy Fitzhardinge L: xen-devel@lists.xensource.com (moderated for non-subscribers) L: virtualization@lists.linux-foundation.org S: Supported -- cgit v0.10.2 From 501a708f18ef911328ffd39f39738b8a7862aa8e Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Sat, 19 Nov 2011 14:37:57 +0100 Subject: PM / Suspend: Fix bug in suspend statistics update After commit 2a77c46de1e3dace73745015635ebbc648eca69c (PM / Suspend: Add statistics debugfs file for suspend to RAM) a missing pair of braces inside the state_store() function causes even invalid arguments to suspend to be wrongly treated as failed suspend attempts. Fix this. [rjw: Put the hash/subject of the buggy commit into the changelog.] Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/main.c b/kernel/power/main.c index 71f49fe..36e0f09 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -290,13 +290,14 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) break; } - if (state < PM_SUSPEND_MAX && *s) + if (state < PM_SUSPEND_MAX && *s) { error = enter_state(state); if (error) { suspend_stats.fail++; dpm_save_failed_errno(error); } else suspend_stats.success++; + } #endif Exit: -- cgit v0.10.2 From 016e8d44bc06dd3322f26712bdd3f3a6973592d0 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 19 Aug 2011 14:50:26 -0400 Subject: fs/minix: Verify bitmap block counts before mounting Newer versions of MINIX can create filesystems that allocate an extra bitmap block. Mounting of this succeeds, but doing a statfs call will result in an oops in count_free because of a negative number being used for the bh index. Avoid this by verifying the number of allocated blocks at mount time, erroring out if there are not enough and make statfs ignore the extras if there are too many. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=18792 Signed-off-by: Josh Boyer Signed-off-by: Al Viro diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 3f32bcb..7c82c29 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -20,10 +20,11 @@ static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits) +static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { unsigned i, j, sum = 0; struct buffer_head *bh; + unsigned numblocks = minix_blocks_needed(numbits, blocksize); for (i=0; is_zmap, sbi->s_zmap_blocks, - sbi->s_nzones - sbi->s_firstdatazone + 1) + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1); + + return (count_free(sbi->s_zmap, sb->s_blocksize, bits) << sbi->s_log_zone_size); } @@ -273,7 +276,10 @@ struct inode *minix_new_inode(const struct inode *dir, int mode, int *error) return inode; } -unsigned long minix_count_free_inodes(struct minix_sb_info *sbi) +unsigned long minix_count_free_inodes(struct super_block *sb) { - return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1); + struct minix_sb_info *sbi = minix_sb(sb); + u32 bits = sbi->s_ninodes + 1; + + return count_free(sbi->s_imap, sb->s_blocksize, bits); } diff --git a/fs/minix/inode.c b/fs/minix/inode.c index 64cdcd6..1d9e339 100644 --- a/fs/minix/inode.c +++ b/fs/minix/inode.c @@ -279,6 +279,27 @@ static int minix_fill_super(struct super_block *s, void *data, int silent) else if (sbi->s_mount_state & MINIX_ERROR_FS) printk("MINIX-fs: mounting file system with errors, " "running fsck is recommended\n"); + + /* Apparently minix can create filesystems that allocate more blocks for + * the bitmaps than needed. We simply ignore that, but verify it didn't + * create one with not enough blocks and bail out if so. + */ + block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize); + if (sbi->s_imap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "imap blocks allocated. Refusing to mount\n"); + goto out_iput; + } + + block = minix_blocks_needed( + (sbi->s_nzones - (sbi->s_firstdatazone + 1)), + s->s_blocksize); + if (sbi->s_zmap_blocks < block) { + printk("MINIX-fs: file system does not have enough " + "zmap blocks allocated. Refusing to mount.\n"); + goto out_iput; + } + return 0; out_iput: @@ -339,10 +360,10 @@ static int minix_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_type = sb->s_magic; buf->f_bsize = sb->s_blocksize; buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size; - buf->f_bfree = minix_count_free_blocks(sbi); + buf->f_bfree = minix_count_free_blocks(sb); buf->f_bavail = buf->f_bfree; buf->f_files = sbi->s_ninodes; - buf->f_ffree = minix_count_free_inodes(sbi); + buf->f_ffree = minix_count_free_inodes(sb); buf->f_namelen = sbi->s_namelen; buf->f_fsid.val[0] = (u32)id; buf->f_fsid.val[1] = (u32)(id >> 32); diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 341e212..6415fe0 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -48,10 +48,10 @@ extern struct minix_inode * minix_V1_raw_inode(struct super_block *, ino_t, stru extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **); extern struct inode * minix_new_inode(const struct inode *, int, int *); extern void minix_free_inode(struct inode * inode); -extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_inodes(struct super_block *sb); extern int minix_new_block(struct inode * inode); extern void minix_free_block(struct inode *inode, unsigned long block); -extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi); +extern unsigned long minix_count_free_blocks(struct super_block *sb); extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *); extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len); @@ -88,6 +88,11 @@ static inline struct minix_inode_info *minix_i(struct inode *inode) return list_entry(inode, struct minix_inode_info, vfs_inode); } +static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize) +{ + return DIV_ROUND_UP(bits, blocksize * 8); +} + #if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \ defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED) -- cgit v0.10.2 From f1fd306a91f875e65af0e04855b23adda6831ac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 26 Aug 2011 22:38:50 -0400 Subject: minixfs: kill manual hweight(), simplify Signed-off-by: Al Viro diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index 7c82c29..ef175cb 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -16,39 +16,26 @@ #include #include -static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; - static DEFINE_SPINLOCK(bitmap_lock); -static unsigned long count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) +/* + * bitmap consists of blocks filled with 16bit words + * bit set == busy, bit clear == free + * endianness is a mess, but for counting zero bits it really doesn't matter... + */ +static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits) { - unsigned i, j, sum = 0; - struct buffer_head *bh; - unsigned numblocks = minix_blocks_needed(numbits, blocksize); - - for (i=0; ib_size; j++) - sum += nibblemap[bh->b_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; - } + __u32 sum = 0; + unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8); - if (numblocks==0 || !(bh=map[numblocks-1])) - return(0); - i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2; - for (j=0; jb_data[j] & 0xf] - + nibblemap[(bh->b_data[j]>>4) & 0xf]; + while (blocks--) { + unsigned words = blocksize / 2; + __u16 *p = (__u16 *)(*map++)->b_data; + while (words--) + sum += 16 - hweight16(*p++); } - i = numbits%16; - if (i!=0) { - i = *(__u16 *)(&bh->b_data[j]) | ~((1<>4) & 0xf]; - sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf]; - } - return(sum); + return sum; } void minix_free_block(struct inode *inode, unsigned long block) diff --git a/fs/minix/minix.h b/fs/minix/minix.h index 6415fe0..26bbd55 100644 --- a/fs/minix/minix.h +++ b/fs/minix/minix.h @@ -130,7 +130,7 @@ static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) if (!size) return 0; - size = (size >> 4) + ((size & 15) > 0); + size >>= 4; while (*p++ == 0xffff) { if (--size == 0) return (p - addr) << 4; -- cgit v0.10.2 From e70f224c1938af208b64b02c5cec27889fefcaec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Tue, 25 Oct 2011 01:38:45 +0200 Subject: drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds a new optional chunk to the CS ioctl that specifies optional flags to the CS parser. Why this is useful is explained below. Note that some regs no longer need the NOP relocation packet if this feature is enabled. Tested on r300g and r600g with this flag disabled and enabled. Assume there are two contexts sharing the same mipmapped tiled texture. One context wants to render into the first mipmap and the other one wants to render into the last mipmap. As you probably know, the hardware has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps, but that only applies to samplers. (at least on r300-r500, though later hardware likely behaves the same) So we want to just re-set the tiling flags before rendering (writing packets), right? ... No. The contexts run in parallel, so they may set the tiling flags simultaneously and then fire their command streams also simultaneously. The last one setting the flags wins, the other one loses. Another problem is when one context wants to render into the first and the last mipmap in one CS. Impossible. It must flush before changing tiling flags and do the rendering into the smaller mipmaps in another CS. Yet another problem is that writing copy_blit in userspace would be a mess involving re-setting tiling flags to please the kernel, and causing races with other contexts at the same time. The only way out of this is to send tiling flags with each CS, ideally with each relocation. But we already do that through the registers. So let's just use what we have in the registers. Signed-off-by: Marek Olšák Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 7fdfa8e..38e1bda 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -480,21 +480,23 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } break; case DB_Z_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } track->db_z_info = radeon_get_ib_value(p, idx); - ib[idx] &= ~Z_ARRAY_MODE(0xf); - track->db_z_info &= ~Z_ARRAY_MODE(0xf); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx] &= ~Z_ARRAY_MODE(0xf); + track->db_z_info &= ~Z_ARRAY_MODE(0xf); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else { + ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case DB_STENCIL_INFO: @@ -607,40 +609,44 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR5_INFO: case CB_COLOR6_INFO: case CB_COLOR7_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = (reg - CB_COLOR0_INFO) / 0x3c; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR8_INFO: case CB_COLOR9_INFO: case CB_COLOR10_INFO: case CB_COLOR11_INFO: - r = evergreen_cs_packet_next_reloc(p, &reloc); - if (r) { - dev_warn(p->dev, "bad SET_CONTEXT_REG " - "0x%04X\n", reg); - return -EINVAL; - } tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8; track->cb_color_info[tmp] = radeon_get_ib_value(p, idx); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { + ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } } break; case CB_COLOR0_PITCH: @@ -1311,10 +1317,12 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = evergreen_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 400b26d..c93bc64 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -701,16 +701,21 @@ static int r300_packet0_check(struct radeon_cs_parser *p, return r; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_TXO_MACRO_TILE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_TXO_MICRO_TILE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_TXO_MICRO_TILE_SQUARE; - - tmp = idx_value + ((u32)reloc->lobj.gpu_offset); - tmp |= tile_flags; - ib[idx] = tmp; + if (p->keep_tiling_flags) { + ib[idx] = (idx_value & 31) | /* keep the 1st 5 bits */ + ((idx_value & ~31) + (u32)reloc->lobj.gpu_offset); + } else { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_TXO_MACRO_TILE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_TXO_MICRO_TILE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_TXO_MICRO_TILE_SQUARE; + + tmp = idx_value + ((u32)reloc->lobj.gpu_offset); + tmp |= tile_flags; + ib[idx] = tmp; + } track->textures[i].robj = reloc->robj; track->tex_dirty = true; break; @@ -760,24 +765,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, /* RB3D_COLORPITCH1 */ /* RB3D_COLORPITCH2 */ /* RB3D_COLORPITCH3 */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; - } + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_COLOR_TILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_COLOR_MICROTILE_ENABLE; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_COLOR_TILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_COLOR_MICROTILE_ENABLE; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE; - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + } i = (reg - 0x4E38) >> 2; track->cb[i].pitch = idx_value & 0x3FFE; switch (((idx_value >> 21) & 0xF)) { @@ -843,25 +850,26 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4F24: /* ZB_DEPTHPITCH */ - r = r100_cs_packet_next_reloc(p, &reloc); - if (r) { - DRM_ERROR("No reloc for ib[%d]=0x%04X\n", - idx, reg); - r100_cs_dump_packet(p, pkt); - return r; - } - - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - tile_flags |= R300_DEPTHMACROTILE_ENABLE; - if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - tile_flags |= R300_DEPTHMICROTILE_TILED; - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) - tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; + if (!p->keep_tiling_flags) { + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } - tmp = idx_value & ~(0x7 << 16); - tmp |= tile_flags; - ib[idx] = tmp; + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + tile_flags |= R300_DEPTHMACROTILE_ENABLE; + if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + tile_flags |= R300_DEPTHMICROTILE_TILED; + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE) + tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE; + tmp = idx_value & ~(0x7 << 16); + tmp |= tile_flags; + ib[idx] = tmp; + } track->zb.pitch = idx_value & 0x3FFC; track->zb_dirty = true; break; diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0a2e023..cb1acff 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -941,7 +941,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->db_depth_control = radeon_get_ib_value(p, idx); break; case R_028010_DB_DEPTH_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_warn(p->dev, "bad SET_CONTEXT_REG " @@ -992,7 +993,8 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case R_0280B4_CB_COLOR5_INFO: case R_0280B8_CB_COLOR6_INFO: case R_0280BC_CB_COLOR7_INFO: - if (r600_cs_packet_next_is_pkt3_nop(p)) { + if (!p->keep_tiling_flags && + r600_cs_packet_next_is_pkt3_nop(p)) { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); @@ -1291,10 +1293,12 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, mip_offset <<= 8; word0 = radeon_get_ib_value(p, idx + 0); - if (tiling_flags & RADEON_TILING_MACRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) - word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (tiling_flags & RADEON_TILING_MACRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (tiling_flags & RADEON_TILING_MICRO) + word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } word1 = radeon_get_ib_value(p, idx + 1); w0 = G_038000_TEX_WIDTH(word0) + 1; h0 = G_038004_TEX_HEIGHT(word1) + 1; @@ -1621,10 +1625,12 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + if (!p->keep_tiling_flags) { + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1); + else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) + ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); + } texture = reloc->robj; /* tex mip base */ r = r600_cs_packet_next_reloc(p, &reloc); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index fc5a1d6..8227e76 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -611,7 +611,8 @@ struct radeon_cs_parser { struct radeon_ib *ib; void *track; unsigned family; - int parser_error; + int parser_error; + bool keep_tiling_flags; }; extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx); diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index ccaa243..29afd71 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -93,7 +93,7 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) { struct drm_radeon_cs *cs = data; uint64_t *chunk_array_ptr; - unsigned size, i; + unsigned size, i, flags = 0; if (!cs->num_chunks) { return 0; @@ -140,6 +140,10 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) if (p->chunks[i].length_dw == 0) return -EINVAL; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS && + !p->chunks[i].length_dw) { + return -EINVAL; + } p->chunks[i].length_dw = user_chunk.length_dw; p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data; @@ -155,6 +159,9 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[i].user_ptr, size)) { return -EFAULT; } + if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS) { + flags = p->chunks[i].kdata[0]; + } } else { p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL); p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); @@ -174,6 +181,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].length_dw); return -EINVAL; } + + p->keep_tiling_flags = (flags & RADEON_CS_KEEP_TILING_FLAGS) != 0; return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index a0b35e9..71499fc 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -53,9 +53,10 @@ * 2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query * 2.10.0 - fusion 2D tiling * 2.11.0 - backend map, initial compute support for the CS checker + * 2.12.0 - RADEON_CS_KEEP_TILING_FLAGS */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 11 +#define KMS_DRIVER_MINOR 12 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index b65be60..be94be6 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -874,6 +874,10 @@ struct drm_radeon_gem_pwrite { #define RADEON_CHUNK_ID_RELOCS 0x01 #define RADEON_CHUNK_ID_IB 0x02 +#define RADEON_CHUNK_ID_FLAGS 0x03 + +/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */ +#define RADEON_CS_KEEP_TILING_FLAGS 0x01 struct drm_radeon_cs_chunk { uint32_t chunk_id; -- cgit v0.10.2 From 95ef1e52922cf75b1ea2eae54ef886f2cc47eecb Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 15 Nov 2011 14:59:07 +0200 Subject: KVM guest: prevent tracing recursion with kvmclock Prevent tracing of preempt_disable() in get_cpu_var() in kvm_clock_read(). When CONFIG_DEBUG_PREEMPT is enabled, preempt_disable/enable() are traced and this causes the function_graph tracer to go into an infinite recursion. By open coding the preempt_disable() around the get_cpu_var(), we can use the notrace version which prevents preempt_disable/enable() from being traced and prevents the recursion. Based on a similar patch for Xen from Jeremy Fitzhardinge. Tested-by: Gleb Natapov Acked-by: Steven Rostedt Signed-off-by: Avi Kivity diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index c1a0188..44842d7 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -74,9 +74,10 @@ static cycle_t kvm_clock_read(void) struct pvclock_vcpu_time_info *src; cycle_t ret; - src = &get_cpu_var(hv_clock); + preempt_disable_notrace(); + src = &__get_cpu_var(hv_clock); ret = pvclock_clocksource_read(src); - put_cpu_var(hv_clock); + preempt_enable_notrace(); return ret; } -- cgit v0.10.2 From 387125fc722a8ed432066b85a552917343bdafca Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 18 Nov 2011 15:07:51 -0500 Subject: Btrfs: fix barrier flushes When btrfs is writing the super blocks, it send barrier flushes to make sure writeback caching drives get all the metadata on disk in the right order. But, we have two bugs in the way these are sent down. When doing full commits (not via the tree log), we are sending the barrier down before the last super when it should be going down before the first. In multi-device setups, we should be waiting for the barriers to complete on all devices before writing any of the supers. Both of these bugs can cause corruptions on power failures. We fix it with some new code to send down empty barriers to all devices before writing the first super. Alexandre Oliva found the multi-device bug. Arne Jansen did the async barrier loop. Signed-off-by: Chris Mason Reported-by: Alexandre Oliva diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b6a5c0d..48d3013 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2573,22 +2573,10 @@ static int write_dev_supers(struct btrfs_device *device, int errors = 0; u32 crc; u64 bytenr; - int last_barrier = 0; if (max_mirrors == 0) max_mirrors = BTRFS_SUPER_MIRROR_MAX; - /* make sure only the last submit_bh does a barrier */ - if (do_barriers) { - for (i = 0; i < max_mirrors; i++) { - bytenr = btrfs_sb_offset(i); - if (bytenr + BTRFS_SUPER_INFO_SIZE >= - device->total_bytes) - break; - last_barrier = i; - } - } - for (i = 0; i < max_mirrors; i++) { bytenr = btrfs_sb_offset(i); if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes) @@ -2634,17 +2622,136 @@ static int write_dev_supers(struct btrfs_device *device, bh->b_end_io = btrfs_end_buffer_write_sync; } - if (i == last_barrier && do_barriers) - ret = submit_bh(WRITE_FLUSH_FUA, bh); - else - ret = submit_bh(WRITE_SYNC, bh); - + /* + * we fua the first super. The others we allow + * to go down lazy. + */ + ret = submit_bh(WRITE_FUA, bh); if (ret) errors++; } return errors < i ? 0 : -1; } +/* + * endio for the write_dev_flush, this will wake anyone waiting + * for the barrier when it is done + */ +static void btrfs_end_empty_barrier(struct bio *bio, int err) +{ + if (err) { + if (err == -EOPNOTSUPP) + set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); + clear_bit(BIO_UPTODATE, &bio->bi_flags); + } + if (bio->bi_private) + complete(bio->bi_private); + bio_put(bio); +} + +/* + * trigger flushes for one the devices. If you pass wait == 0, the flushes are + * sent down. With wait == 1, it waits for the previous flush. + * + * any device where the flush fails with eopnotsupp are flagged as not-barrier + * capable + */ +static int write_dev_flush(struct btrfs_device *device, int wait) +{ + struct bio *bio; + int ret = 0; + + if (device->nobarriers) + return 0; + + if (wait) { + bio = device->flush_bio; + if (!bio) + return 0; + + wait_for_completion(&device->flush_wait); + + if (bio_flagged(bio, BIO_EOPNOTSUPP)) { + printk("btrfs: disabling barriers on dev %s\n", + device->name); + device->nobarriers = 1; + } + if (!bio_flagged(bio, BIO_UPTODATE)) { + ret = -EIO; + } + + /* drop the reference from the wait == 0 run */ + bio_put(bio); + device->flush_bio = NULL; + + return ret; + } + + /* + * one reference for us, and we leave it for the + * caller + */ + device->flush_bio = NULL;; + bio = bio_alloc(GFP_NOFS, 0); + if (!bio) + return -ENOMEM; + + bio->bi_end_io = btrfs_end_empty_barrier; + bio->bi_bdev = device->bdev; + init_completion(&device->flush_wait); + bio->bi_private = &device->flush_wait; + device->flush_bio = bio; + + bio_get(bio); + submit_bio(WRITE_FLUSH, bio); + + return 0; +} + +/* + * send an empty flush down to each device in parallel, + * then wait for them + */ +static int barrier_all_devices(struct btrfs_fs_info *info) +{ + struct list_head *head; + struct btrfs_device *dev; + int errors = 0; + int ret; + + /* send down all the barriers */ + head = &info->fs_devices->devices; + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 0); + if (ret) + errors++; + } + + /* wait for all the barriers */ + list_for_each_entry_rcu(dev, head, dev_list) { + if (!dev->bdev) { + errors++; + continue; + } + if (!dev->in_fs_metadata || !dev->writeable) + continue; + + ret = write_dev_flush(dev, 1); + if (ret) + errors++; + } + if (errors) + return -EIO; + return 0; +} + int write_all_supers(struct btrfs_root *root, int max_mirrors) { struct list_head *head; @@ -2666,6 +2773,10 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) mutex_lock(&root->fs_info->fs_devices->device_list_mutex); head = &root->fs_info->fs_devices->devices; + + if (do_barriers) + barrier_all_devices(root->fs_info); + list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) { total_errors++; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index ab5b1c4..78f2d4d 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -100,6 +100,12 @@ struct btrfs_device { struct reada_zone *reada_curr_zone; struct radix_tree_root reada_zones; struct radix_tree_root reada_extents; + + /* for sending down flush barriers */ + struct bio *flush_bio; + struct completion flush_wait; + int nobarriers; + }; struct btrfs_fs_devices { -- cgit v0.10.2 From 745c4d8e160afaf6c75e887c27ea4b75c8142b26 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 20 Nov 2011 07:31:57 -0500 Subject: btrfs: Fix up 32/64-bit compatibility for new ioctls This patch casts to unsigned long before casting to a pointer and fixes the following warnings: fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Jeff Mahoney Signed-off-by: Chris Mason diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 8855aad..22c64ff 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -683,7 +683,7 @@ static int inode_to_path(u64 inum, struct btrfs_inode_ref *iref, return PTR_ERR(fspath); if (fspath > fspath_min) { - ipath->fspath->val[i] = (u64)fspath; + ipath->fspath->val[i] = (u64)(unsigned long)fspath; ++ipath->fspath->elem_cnt; ipath->fspath->bytes_left = fspath - fspath_min; } else { diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 1f87c4d..47fdba7 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2286,7 +2286,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } if (!uptodate) { u64 failed_mirror; - failed_mirror = (u64)bio->bi_bdev; + failed_mirror = (unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 4a34c47..bda53fc 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2930,11 +2930,13 @@ static long btrfs_ioctl_ino_to_path(struct btrfs_root *root, void __user *arg) goto out; for (i = 0; i < ipath->fspath->elem_cnt; ++i) { - rel_ptr = ipath->fspath->val[i] - (u64)ipath->fspath->val; + rel_ptr = ipath->fspath->val[i] - + (u64)(unsigned long)ipath->fspath->val; ipath->fspath->val[i] = rel_ptr; } - ret = copy_to_user((void *)ipa->fspath, (void *)ipath->fspath, size); + ret = copy_to_user((void *)(unsigned long)ipa->fspath, + (void *)(unsigned long)ipath->fspath, size); if (ret) { ret = -EFAULT; goto out; @@ -3017,7 +3019,8 @@ static long btrfs_ioctl_logical_to_ino(struct btrfs_root *root, if (ret < 0) goto out; - ret = copy_to_user((void *)loi->inodes, (void *)inodes, size); + ret = copy_to_user((void *)(unsigned long)loi->inodes, + (void *)(unsigned long)inodes, size); if (ret) ret = -EFAULT; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index f4190f2..fab420d 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -272,7 +272,7 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx) swarn->logical, swarn->dev->name, (unsigned long long)swarn->sector, root, inum, offset, min(isize - offset, (u64)PAGE_SIZE), nlink, - (char *)ipath->fspath->val[i]); + (char *)(unsigned long)ipath->fspath->val[i]); free_ipath(ipath); return 0; -- cgit v0.10.2 From 32240a913d9f3a5aad42175d7696590ea1bfdb08 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: btrfs: mirror_num should be int, not u64 My previous patch introduced some u64 for failed_mirror variables, this one makes it consistent again. Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 48d3013..94abc25 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -620,7 +620,7 @@ out: static int btree_io_failed_hook(struct bio *failed_bio, struct page *page, u64 start, u64 end, - u64 mirror_num, struct extent_state *state) + int mirror_num, struct extent_state *state) { struct extent_io_tree *tree; unsigned long len; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 47fdba7..a877b8b 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2285,8 +2285,8 @@ static void end_bio_extent_readpage(struct bio *bio, int err) clean_io_failure(start, page); } if (!uptodate) { - u64 failed_mirror; - failed_mirror = (unsigned long)bio->bi_bdev; + int failed_mirror; + failed_mirror = (int)(unsigned long)bio->bi_bdev; if (tree->ops && tree->ops->readpage_io_failed_hook) ret = tree->ops->readpage_io_failed_hook( bio, page, start, end, diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index feb9be0..7604c30 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -70,7 +70,7 @@ struct extent_io_ops { unsigned long bio_flags); int (*readpage_io_hook)(struct page *page, u64 start, u64 end); int (*readpage_io_failed_hook)(struct bio *bio, struct page *page, - u64 start, u64 end, u64 failed_mirror, + u64 start, u64 end, int failed_mirror, struct extent_state *state); int (*writepage_io_failed_hook)(struct bio *bio, struct page *page, u64 start, u64 end, -- cgit v0.10.2 From 0f0fbf1d0e188d129756e9508090af4bdbfde00b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: fix to search one more bitmap for cluster setup Suppose there are two bitmaps [0, 256], [256, 512] and one extent [100, 120] in the free space cache, and we want to setup a cluster with offset=100, bytes=50. In this case, there will be only one bitmap [256, 512] in the temporary bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256]. The cause is, the list is constructed in setup_cluster_no_bitmap(), and only bitmaps with bitmap_entry->offset >= offset will be added into the list, and the very bitmap that convers offset has bitmap_entry->offset <= offset. Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 181760f..8f792f4 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2453,11 +2453,23 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *entry; struct rb_node *node; int ret = -ENOSPC; + u64 bitmap_offset = offset_to_bitmap(ctl, offset); if (ctl->total_bitmaps == 0) return -ENOSPC; /* + * The bitmap that covers offset won't be in the list unless offset + * is just its start offset. + */ + entry = list_first_entry(bitmaps, struct btrfs_free_space, list); + if (entry->offset != bitmap_offset) { + entry = tree_search_offset(ctl, bitmap_offset, 1, 0); + if (entry && list_empty(&entry->list)) + list_add(&entry->list, bitmaps); + } + + /* * First check our cached list of bitmaps and see if there is an entry * here that will work. */ -- cgit v0.10.2 From 52621cb6ed0e0e14358bb317bda7cd5fbd5c2a27 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: avoid unnecessary bitmap search for cluster setup setup_cluster_no_bitmap() searches all the extents and bitmaps starting from offset. Therefore if it returns -ENOSPC, all the bitmaps starting from offset are in the bitmaps list, so it's sufficient to search from this list in setup_cluser_bitmap(). Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8f792f4..8c32434 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2451,7 +2451,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry; - struct rb_node *node; int ret = -ENOSPC; u64 bitmap_offset = offset_to_bitmap(ctl, offset); @@ -2469,10 +2468,6 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, list_add(&entry->list, bitmaps); } - /* - * First check our cached list of bitmaps and see if there is an entry - * here that will work. - */ list_for_each_entry(entry, bitmaps, list) { if (entry->bytes < min_bytes) continue; @@ -2483,38 +2478,10 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, } /* - * If we do have entries on our list and we are here then we didn't find - * anything, so go ahead and get the next entry after the last entry in - * this list and start the search from there. + * The bitmaps list has all the bitmaps that record free space + * starting after offset, so no more search is required. */ - if (!list_empty(bitmaps)) { - entry = list_entry(bitmaps->prev, struct btrfs_free_space, - list); - node = rb_next(&entry->offset_index); - if (!node) - return -ENOSPC; - entry = rb_entry(node, struct btrfs_free_space, offset_index); - goto search; - } - - entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1); - if (!entry) - return -ENOSPC; - -search: - node = &entry->offset_index; - do { - entry = rb_entry(node, struct btrfs_free_space, offset_index); - node = rb_next(&entry->offset_index); - if (!entry->bitmap) - continue; - if (entry->bytes < min_bytes) - continue; - ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset, - bytes, min_bytes); - } while (ret && node); - - return ret; + return -ENOSPC; } /* @@ -2532,8 +2499,8 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, u64 offset, u64 bytes, u64 empty_size) { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; - struct list_head bitmaps; struct btrfs_free_space *entry, *tmp; + LIST_HEAD(bitmaps); u64 min_bytes; int ret; @@ -2572,7 +2539,6 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, goto out; } - INIT_LIST_HEAD(&bitmaps); ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset, bytes, min_bytes); if (ret) -- cgit v0.10.2 From fadc0d8be4dfca80f6c568bc5874931893c6709b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: btrfs: fix stat blocks accounting Round inode bytes and delalloc bytes up to real blocksize before converting to sector size. Otherwise eg. files smaller than 512 are reported with zero blocks due to incorrect rounding. Signed-off-by: David Sterba Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e16215f..8ad26b1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6794,11 +6794,13 @@ static int btrfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct inode *inode = dentry->d_inode; + u32 blocksize = inode->i_sb->s_blocksize; + generic_fillattr(inode, stat); stat->dev = BTRFS_I(inode)->root->anon_dev; stat->blksize = PAGE_CACHE_SIZE; - stat->blocks = (inode_get_bytes(inode) + - BTRFS_I(inode)->delalloc_bytes) >> 9; + stat->blocks = (ALIGN(inode_get_bytes(inode), blocksize) + + ALIGN(BTRFS_I(inode)->delalloc_bytes, blocksize)) >> 9; return 0; } -- cgit v0.10.2 From 5bb1468238e20b15921909e9f9601e945f03bac7 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Sun, 20 Nov 2011 07:33:38 -0500 Subject: Btrfs: prefix resize related printks with btrfs: For the user it is confusing to find something like: [10197.627710] new size for /dev/mapper/vg0-usr_share is 3221225472 in kernel log, because it doesn't point directly to btrfs. This patch prefixes those messages with "btrfs:" like other btrfs related printks. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Mason diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index bda53fc..a90e749 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1216,12 +1216,12 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, *devstr = '\0'; devstr = vol_args->name; devid = simple_strtoull(devstr, &end, 10); - printk(KERN_INFO "resizing devid %llu\n", + printk(KERN_INFO "btrfs: resizing devid %llu\n", (unsigned long long)devid); } device = btrfs_find_device(root, devid, NULL, NULL); if (!device) { - printk(KERN_INFO "resizer unable to find device %llu\n", + printk(KERN_INFO "btrfs: resizer unable to find device %llu\n", (unsigned long long)devid); ret = -EINVAL; goto out_unlock; @@ -1267,7 +1267,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, do_div(new_size, root->sectorsize); new_size *= root->sectorsize; - printk(KERN_INFO "new size for %s is %llu\n", + printk(KERN_INFO "btrfs: new size for %s is %llu\n", device->name, (unsigned long long)new_size); if (new_size > old_size) { -- cgit v0.10.2 From 291c7d2f577428f896daa5002e784959328a80aa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 14 Nov 2011 13:52:14 -0500 Subject: Btrfs: wait on caching if we're loading the free space cache We've been hitting panics when running xfstest 13 in a loop for long periods of time. And actually this problem has always existed so we've been hitting these things randomly for a while. Basically what happens is we get a thread coming into the allocator and reading the space cache off of disk and adding the entries to the free space cache as we go. Then we get another thread that comes in and tries to allocate from that block group. Since block_group->cached != BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because if we're doing the old slow way of caching we don't want to hold people up and wait for everything to finish. The problem with this is we could end up discarding the space cache at some arbitrary point in the future, which means we could very well end up allocating space that is either bad, or when the real caching happens it could end up thinking the space isn't in use when it really is and cause all sorts of other problems. The solution is to add a new flag to indicate we are loading the free space cache from disk, and always try to cache the block group if cache->cached != BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else who tries to allocate from the block group will have to wait until it's finished to make sure it completes successfully. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b1cb3c0..04a5dfc 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -848,7 +848,8 @@ struct btrfs_free_cluster { enum btrfs_caching_type { BTRFS_CACHE_NO = 0, BTRFS_CACHE_STARTED = 1, - BTRFS_CACHE_FINISHED = 2, + BTRFS_CACHE_FAST = 2, + BTRFS_CACHE_FINISHED = 3, }; enum btrfs_disk_cache_state { diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0f47b3e..5d86877 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -467,13 +467,59 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, struct btrfs_root *root, int load_cache_only) { + DEFINE_WAIT(wait); struct btrfs_fs_info *fs_info = cache->fs_info; struct btrfs_caching_control *caching_ctl; int ret = 0; - smp_mb(); - if (cache->cached != BTRFS_CACHE_NO) + caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); + BUG_ON(!caching_ctl); + + INIT_LIST_HEAD(&caching_ctl->list); + mutex_init(&caching_ctl->mutex); + init_waitqueue_head(&caching_ctl->wait); + caching_ctl->block_group = cache; + caching_ctl->progress = cache->key.objectid; + atomic_set(&caching_ctl->count, 1); + caching_ctl->work.func = caching_thread; + + spin_lock(&cache->lock); + /* + * This should be a rare occasion, but this could happen I think in the + * case where one thread starts to load the space cache info, and then + * some other thread starts a transaction commit which tries to do an + * allocation while the other thread is still loading the space cache + * info. The previous loop should have kept us from choosing this block + * group, but if we've moved to the state where we will wait on caching + * block groups we need to first check if we're doing a fast load here, + * so we can wait for it to finish, otherwise we could end up allocating + * from a block group who's cache gets evicted for one reason or + * another. + */ + while (cache->cached == BTRFS_CACHE_FAST) { + struct btrfs_caching_control *ctl; + + ctl = cache->caching_ctl; + atomic_inc(&ctl->count); + prepare_to_wait(&ctl->wait, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock(&cache->lock); + + schedule(); + + finish_wait(&ctl->wait, &wait); + put_caching_control(ctl); + spin_lock(&cache->lock); + } + + if (cache->cached != BTRFS_CACHE_NO) { + spin_unlock(&cache->lock); + kfree(caching_ctl); return 0; + } + WARN_ON(cache->caching_ctl); + cache->caching_ctl = caching_ctl; + cache->cached = BTRFS_CACHE_FAST; + spin_unlock(&cache->lock); /* * We can't do the read from on-disk cache during a commit since we need @@ -484,56 +530,51 @@ static int cache_block_group(struct btrfs_block_group_cache *cache, if (trans && (!trans->transaction->in_commit) && (root && root != root->fs_info->tree_root) && btrfs_test_opt(root, SPACE_CACHE)) { - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { - spin_unlock(&cache->lock); - return 0; - } - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); - ret = load_free_space_cache(fs_info, cache); spin_lock(&cache->lock); if (ret == 1) { + cache->caching_ctl = NULL; cache->cached = BTRFS_CACHE_FINISHED; cache->last_byte_to_unpin = (u64)-1; } else { - cache->cached = BTRFS_CACHE_NO; + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } } spin_unlock(&cache->lock); + wake_up(&caching_ctl->wait); if (ret == 1) { + put_caching_control(caching_ctl); free_excluded_extents(fs_info->extent_root, cache); return 0; } + } else { + /* + * We are not going to do the fast caching, set cached to the + * appropriate value and wakeup any waiters. + */ + spin_lock(&cache->lock); + if (load_cache_only) { + cache->caching_ctl = NULL; + cache->cached = BTRFS_CACHE_NO; + } else { + cache->cached = BTRFS_CACHE_STARTED; + } + spin_unlock(&cache->lock); + wake_up(&caching_ctl->wait); } - if (load_cache_only) - return 0; - - caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS); - BUG_ON(!caching_ctl); - - INIT_LIST_HEAD(&caching_ctl->list); - mutex_init(&caching_ctl->mutex); - init_waitqueue_head(&caching_ctl->wait); - caching_ctl->block_group = cache; - caching_ctl->progress = cache->key.objectid; - /* one for caching kthread, one for caching block group list */ - atomic_set(&caching_ctl->count, 2); - caching_ctl->work.func = caching_thread; - - spin_lock(&cache->lock); - if (cache->cached != BTRFS_CACHE_NO) { - spin_unlock(&cache->lock); - kfree(caching_ctl); + if (load_cache_only) { + put_caching_control(caching_ctl); return 0; } - cache->caching_ctl = caching_ctl; - cache->cached = BTRFS_CACHE_STARTED; - spin_unlock(&cache->lock); down_write(&fs_info->extent_commit_sem); + atomic_inc(&caching_ctl->count); list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups); up_write(&fs_info->extent_commit_sem); @@ -5177,13 +5218,15 @@ search: } have_block_group: - if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) { u64 free_percent; + found_uncached_bg = true; ret = cache_block_group(block_group, trans, orig_root, 1); if (block_group->cached == BTRFS_CACHE_FINISHED) - goto have_block_group; + goto alloc; free_percent = btrfs_block_group_used(&block_group->item); free_percent *= 100; @@ -5205,7 +5248,6 @@ have_block_group: orig_root, 0); BUG_ON(ret); } - found_uncached_bg = true; /* * If loop is set for cached only, try the next block @@ -5215,10 +5257,7 @@ have_block_group: goto loop; } - cached = block_group_cache_done(block_group); - if (unlikely(!cached)) - found_uncached_bg = true; - +alloc: if (unlikely(block_group->ro)) goto loop; -- cgit v0.10.2 From f7d61dcd6873c49bcc42be2caa2af1c2511aa915 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 15 Nov 2011 09:31:24 -0500 Subject: Btrfs: clear pages dirty for io and set them extent mapped When doing the io_ctl helpers to clean up the free space cache stuff I stopped using our normal prepare_pages stuff, which means I of course forgot to do things like set the pages extent mapped, which will cause us all sorts of wonderful propblems. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 8c32434..aedacdb 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -351,6 +351,11 @@ static int io_ctl_prepare_pages(struct io_ctl *io_ctl, struct inode *inode, } } + for (i = 0; i < io_ctl->num_pages; i++) { + clear_page_dirty_for_io(io_ctl->pages[i]); + set_page_extent_mapped(io_ctl->pages[i]); + } + return 0; } -- cgit v0.10.2 From 4d479cf010d56ec9c54f3099992d039918f1296b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 17 Nov 2011 11:34:31 -0500 Subject: Btrfs: sectorsize align offsets in fiemap We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere else that calls btrfs_get_extent while running xfstests 13 in a loop. This is because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets, which will end up adding mappings that are not sectorsize aligned, which will cause problems in some cases for subsequent calls to btrfs_get_extent for similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't hit the problem that I could previously hit in at most 20 minutes. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index a877b8b..9472d3d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3366,6 +3366,9 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, return -ENOMEM; path->leave_spinning = 1; + start = ALIGN(start, BTRFS_I(inode)->root->sectorsize); + len = ALIGN(len, BTRFS_I(inode)->root->sectorsize); + /* * lookup the last file extent. We're not using i_size here * because there might be preallocation past i_size @@ -3413,7 +3416,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, &cached_state, GFP_NOFS); - em = get_extent_skip_holes(inode, off, last_for_get_extent, + em = get_extent_skip_holes(inode, start, last_for_get_extent, get_extent); if (!em) goto out; -- cgit v0.10.2 From 0aed4a95ce3b39acfceb38ab7f93c7906b4a27f8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:10:27 +0100 Subject: ASoC: adau1373: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/adau1373.c b/sound/soc/codecs/adau1373.c index 1ccf8dd..45c6302 100644 --- a/sound/soc/codecs/adau1373.c +++ b/sound/soc/codecs/adau1373.c @@ -245,7 +245,7 @@ static const char *adau1373_bass_hpf_cutoff_text[] = { }; static const unsigned int adau1373_bass_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(3), 0, 2, TLV_DB_SCALE_ITEM(-600, 600, 1), 3, 4, TLV_DB_SCALE_ITEM(950, 250, 0), 5, 7, TLV_DB_SCALE_ITEM(1400, 150, 0), -- cgit v0.10.2 From a19ea0b8ec1f6892bf18f461d5023c9299e1417b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:11:54 +0100 Subject: ASoC: rt5631: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent the last entry from being omitted. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c index 27a078c..4646e80 100644 --- a/sound/soc/codecs/rt5631.c +++ b/sound/soc/codecs/rt5631.c @@ -177,7 +177,7 @@ static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -95625, 375, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52}dB */ static unsigned int mic_bst_tlv[] = { - TLV_DB_RANGE_HEAD(6), + TLV_DB_RANGE_HEAD(7), 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0), 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), -- cgit v0.10.2 From 740fb9d512d91b1d6192ea13c109efa05b101424 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:12:26 +0100 Subject: ASoC: sgtl5000: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index d15695d..bbcf921 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -365,7 +365,7 @@ static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); /* tlv for mic gain, 0db 20db 30db 40db */ static const unsigned int mic_gain_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0), }; -- cgit v0.10.2 From 43e9dc7bce9f21355cd2aa493a99281eae03b156 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:13:27 +0100 Subject: ASoC: wm8962: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 91d3c6d..53edd9a 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1973,7 +1973,7 @@ static int wm8962_reset(struct snd_soc_codec *codec) static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0); static const DECLARE_TLV_DB_SCALE(mixin_tlv, -1500, 300, 0); static const unsigned int mixinpga_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(5), 0, 1, TLV_DB_SCALE_ITEM(0, 600, 0), 2, 2, TLV_DB_SCALE_ITEM(1300, 1300, 0), 3, 4, TLV_DB_SCALE_ITEM(1800, 200, 0), @@ -1988,7 +1988,7 @@ static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); static const DECLARE_TLV_DB_SCALE(hp_tlv, -700, 100, 0); static const unsigned int classd_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From dac678f5c281fac55aadfa5f390c12a8d14bbc67 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:14:11 +0100 Subject: ASoC: wm8993: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index eec8e14..d1a142f4 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -512,7 +512,7 @@ static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); static const unsigned int drc_max_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0), 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), }; -- cgit v0.10.2 From a1320fee27352b608a82020a47a59bb15e6e5db8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:14:55 +0100 Subject: ASoC: wm9090: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 2b5252c..f94c060 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -177,19 +177,19 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec) } static const unsigned int in_tlv[] = { - TLV_DB_RANGE_HEAD(6), + TLV_DB_RANGE_HEAD(3), 0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0), 1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0), 4, 6, TLV_DB_SCALE_ITEM(600, 600, 0), }; static const unsigned int mix_tlv[] = { - TLV_DB_RANGE_HEAD(4), + TLV_DB_RANGE_HEAD(2), 0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0), 3, 3, TLV_DB_SCALE_ITEM(0, 0, 0), }; static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); static const unsigned int spkboost_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From 028aa634e180107ac93b790c0fed7376c0402d1a Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 20 Nov 2011 15:15:31 +0100 Subject: ASoC: wm_hubs: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 84f33d4..48e61e9 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -40,7 +40,7 @@ static const DECLARE_TLV_DB_SCALE(outmix_tlv, -2100, 300, 0); static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1); static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0); static const unsigned int spkboost_tlv[] = { - TLV_DB_RANGE_HEAD(7), + TLV_DB_RANGE_HEAD(2), 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0), 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0), }; -- cgit v0.10.2 From ef0cd47093a6c4b8a1f17d7be02a966f7805ff41 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 19 Nov 2011 14:41:07 +0800 Subject: ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls Signed-off-by: Axel Lin Acked-by: Alexander Sverdlin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index 23d1bd5..69fde15 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -434,7 +434,8 @@ static int cs4271_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg) { int ret; /* Set power-down bit */ - ret = snd_soc_update_bits(codec, CS4271_MODE2, 0, CS4271_MODE2_PDN); + ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN, + CS4271_MODE2_PDN); if (ret < 0) return ret; return 0; @@ -501,8 +502,9 @@ static int cs4271_probe(struct snd_soc_codec *codec) return ret; } - ret = snd_soc_update_bits(codec, CS4271_MODE2, 0, - CS4271_MODE2_PDN | CS4271_MODE2_CPEN); + ret = snd_soc_update_bits(codec, CS4271_MODE2, + CS4271_MODE2_PDN | CS4271_MODE2_CPEN, + CS4271_MODE2_PDN | CS4271_MODE2_CPEN); if (ret < 0) return ret; ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN, 0); -- cgit v0.10.2 From dd179946db2493646955efc112d73c85b3cafcb1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Aug 2011 15:31:30 +0100 Subject: VFS: Log the fact that we've given ELOOP rather than creating a loop To prevent an NFS server from being used to create a directory loop in an NFS superblock on the client, the following patch was committed: commit 1836750115f20b774e55c032a3893e8c5bdf41ed Author: Al Viro Date: Tue Jul 12 21:42:24 2011 -0400 Subject: fix loop checks in d_materialise_unique() This causes ELOOP to be reported to anyone trying to access the dentry that would otherwise cause the kernel to complete the loop. However, no indication is given to the caller as to why an operation that ought to work doesn't. The fault is with the kernel, which doesn't want to try and solve the problem as it gets horrendously messy if there's another mountpoint somewhere in the trees being spliced that can't be moved[*]. [*] The real problem is that we don't handle the excision of a subtree that gets moved _out_ of what we can see. This can happen on the server where a directory is merely moved between two other dirs on the same filesystem, but where destination dir is not accessible by the client. So, given the choice to return ELOOP rather than trying to reconfigure the dentry tree, we should give the caller some indication of why they aren't being allowed to make what should be a legitimate request and log a message. Signed-off-by: David Howells Acked-by: Sachin Prabhu Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index a901c69..10ba92d 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "internal.h" /* @@ -2383,8 +2384,16 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode) actual = __d_unalias(inode, dentry, alias); } write_sequnlock(&rename_lock); - if (IS_ERR(actual)) + if (IS_ERR(actual)) { + if (PTR_ERR(actual) == -ELOOP) + pr_warn_ratelimited( + "VFS: Lookup of '%s' in %s %s" + " would have caused loop\n", + dentry->d_name.name, + inode->i_sb->s_type->name, + inode->i_sb->s_id); dput(alias); + } goto out_nolock; } } -- cgit v0.10.2 From 274252862f386b7868f35bf5ceaa5391a8ccfdf3 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 16 Nov 2011 18:28:01 +0100 Subject: crypto: mv_cesa - fix hashing of chunks > 1920 bytes This was broken by commit 7759995c75ae0cbd4c861582908449f6b6208e7a (yes, myself). The basic problem here is since the digest state is only saved after the last chunk, the state array is only valid when handling the first chunk of the next buffer. Broken since linux-3.0. Signed-off-by: Phil Sutter Cc: # 3.1.x Signed-off-by: Herbert Xu diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 3cf303e..38a3297 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -342,11 +342,13 @@ static void mv_process_hash_current(int first_block) else op.config |= CFG_MID_FRAG; - writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A); - writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B); - writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C); - writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D); - writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E); + if (first_block) { + writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A); + writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B); + writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C); + writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D); + writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E); + } } memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config)); -- cgit v0.10.2 From 91ec37cc1015220965e39bf342fb846810d19e79 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 17 Nov 2011 20:31:02 +0100 Subject: Fix comparison using wrong pointer variable in dma debug code cppcheck reported: [lib/dma-debug.c:248] -> [lib/dma-debug.c:248]: (style) Same expression on both sides of '=='. Signed-off-by: Thomas Jarosch Signed-off-by: Joerg Roedel diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 74c6c7f..fea790a 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -245,7 +245,7 @@ static void put_hash_bucket(struct hash_bucket *bucket, static bool exact_match(struct dma_debug_entry *a, struct dma_debug_entry *b) { - return ((a->dev_addr == a->dev_addr) && + return ((a->dev_addr == b->dev_addr) && (a->dev == b->dev)) ? true : false; } -- cgit v0.10.2 From 27533df80e93dc164e39d47281bbbd608f9014a6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Nov 2011 23:57:49 +0300 Subject: ALSA: cs5535 - Fix an endianness conversion desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c index e083122..dbf94b1 100644 --- a/sound/pci/cs5535audio/cs5535audio_pcm.c +++ b/sound/pci/cs5535audio/cs5535audio_pcm.c @@ -148,7 +148,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au, struct cs5535audio_dma_desc *desc = &((struct cs5535audio_dma_desc *) dma->desc_buf.area)[i]; desc->addr = cpu_to_le32(addr); - desc->size = cpu_to_le32(period_bytes); + desc->size = cpu_to_le16(period_bytes); desc->ctlreserved = cpu_to_le16(PRD_EOP); desc_addr += sizeof(struct cs5535audio_dma_desc); addr += period_bytes; -- cgit v0.10.2 From 11ed0ba1754841316d4095478944300acf19acc3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:58 +0100 Subject: ARM: 7161/1: errata: no automatic store buffer drain This patch implements a workaround for PL310 erratum 769419. On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable writes to be retained when the memory system is idle, leading to suboptimal I/O performance for drivers using coherent DMA. This patch adds an optional wmb() call to the cpu_idle loop. On systems with an outer cache, this causes an explicit flush of the store buffer. Cc: stable@vger.kernel.org Acked-by: Catalin Marinas Tested-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789ef..83aa746 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 75316f0..3d0c6fb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -192,6 +192,9 @@ void cpu_idle(void) #endif local_irq_disable(); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); +#endif if (hlt_counter) { local_irq_enable(); cpu_relax(); -- cgit v0.10.2 From fa0ce4035d4897b0642132866d896a906429f45e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Nov 2011 17:24:57 +0100 Subject: ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds The Kconfig options for the PL310 errata workarounds do not use a consistent naming scheme for either the config option or the bool description. This patch tidies up the options by ensuring that the bool descriptions are prefixed with "PL310 errata:" and the config options are prefixed with PL310_ERRATA_, making it much clearer in menuconfig as to what the workarounds are for. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 83aa746..e084b7e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1231,7 +1231,7 @@ config ARM_ERRATA_742231 capabilities of the processor. config PL310_ERRATA_588369 - bool "Clean & Invalidate maintenance operations do not invalidate clean lines" + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & @@ -1256,7 +1256,7 @@ config ARM_ERRATA_720789 entries regardless of the ASID. config PL310_ERRATA_727915 - bool "Background Clean & Invalidate by Way operation can cause data corruption" + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance @@ -1289,8 +1289,8 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config ARM_ERRATA_753970 - bool "ARM errata: cache sync operation may be faulty" +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8ac9e9f..b1e192b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -61,7 +61,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_ARM_ERRATA_753970 +#ifdef CONFIG_PL310_ERRATA_753970 /* write to an unmmapped register */ writel_relaxed(0, base + L2X0_DUMMY_REG); #else -- cgit v0.10.2 From 2674dd0b1c07d8b8dfb4872fc7b41841f05cb957 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:21:24 +0100 Subject: ARM: 7163/2: PL330: Only register usable channels When the manager is running non-secure, the only channels that can issue interrupts are the ones that have a 1 in their corresponding bit in Configuration Register 3. The other ones will generate an abort when trying to signal the end of the transaction so they are useless in non-secure mode. Reference: <1320244259-10496-2-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 7129cfb..f748a38 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd) return -1; } +static bool _chan_ns(const struct pl330_info *pi, int i) +{ + return pi->pcfg.irq_ns & (1 << i); +} + /* Upon success, returns IdentityToken for the * allocated channel, NULL otherwise. */ @@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi) for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; - if (thrd->free) { + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pi, i))) { thrd->ev = _alloc_event(thrd); if (thrd->ev >= 0) { thrd->free = false; -- cgit v0.10.2 From 1c8a7c1fbfc7ae2362d26559df26b99c806b68b5 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 16 Nov 2011 12:45:39 +0100 Subject: ARM: 7165/2: PL330: Fix typo in _prepare_ccr() scctl should be shifted by CC_SRCCTRL_SHFT and dcctl by CC_DSTCCTRL_SHFT, not the other way round. Reference: <1320244259-10496-4-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino Acked-by: Jassi Brar Signed-off-by: Russell King diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index f748a38..f407a6b 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); ccr |= (rqc->swap << CC_SWAP_SHFT); -- cgit v0.10.2 From 53cbcbcf4362ef39e0a692b1d23c395999397fca Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 17 Nov 2011 13:11:21 +0100 Subject: ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c Commit 99d1717d (ARM: Add init_consistent_dma_size()) introduces dynamic allocation of the consistent_pte array. The number of PTEs should be calculated based on the number of PMD entries rather than PGD, hence the PMD_SHIFT. Signed-off-by: Catalin Marinas Cc: Jon Medhurst Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4e7f6c..ab58456 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -168,7 +168,7 @@ static int __init consistent_init(void) pte_t *pte; int i = 0; unsigned long base = consistent_base; - unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT; + unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT; consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); if (!consistent_pte) { -- cgit v0.10.2 From 2ac654f740b574c58ee02bac3816cf466a1bfb41 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 16 Nov 2011 20:40:42 -0800 Subject: Bluetooth: btmrvl: support Marvell Bluetooth device SD8797 The SD8797 firmware image is shared with mwifiex driver. Whoever gets loaded first will be responsible for firmware downloading. Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 11b41fd..5ccf142 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -188,7 +188,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787. + Marvell Bluetooth devices, such as 8688/8787/8797. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -201,8 +201,8 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787 chipsets are - supported. + devices with SDIO interface. Currently SD8688/SD8787/SD8797 + chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index c827d73..37b5639 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -64,7 +64,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = { .io_port_1 = 0x01, .io_port_2 = 0x02, }; -static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = { +static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .cfg = 0x00, .host_int_mask = 0x02, .host_intstatus = 0x03, @@ -91,7 +91,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper = NULL, .firmware = "mrvl/sd8787_uapsta.bin", - .reg = &btmrvl_reg_8787, + .reg = &btmrvl_reg_87xx, + .sd_blksz_fw_dl = 256, +}; + +static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { + .helper = NULL, + .firmware = "mrvl/sd8797_uapsta.bin", + .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -102,6 +109,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8787 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A), .driver_data = (unsigned long) &btmrvl_sdio_sd8787 }, + /* Marvell SD8797 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), + .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, { } /* Terminating entry */ }; @@ -1075,3 +1085,4 @@ MODULE_LICENSE("GPL v2"); MODULE_FIRMWARE("sd8688_helper.bin"); MODULE_FIRMWARE("sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); -- cgit v0.10.2 From 48b28b8db9a74cc5c43e76485dc397e22bea2984 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 19 Nov 2011 13:23:32 +0100 Subject: Bluetooth: cmtp: Fix module reference We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c index 7d00ddf..5a6e634 100644 --- a/net/bluetooth/cmtp/core.c +++ b/net/bluetooth/cmtp/core.c @@ -67,14 +67,12 @@ static struct cmtp_session *__cmtp_get_session(bdaddr_t *bdaddr) static void __cmtp_link_session(struct cmtp_session *session) { - __module_get(THIS_MODULE); list_add(&session->list, &cmtp_session_list); } static void __cmtp_unlink_session(struct cmtp_session *session) { list_del(&session->list); - module_put(THIS_MODULE); } static void __cmtp_copy_session(struct cmtp_session *session, struct cmtp_conninfo *ci) @@ -327,6 +325,7 @@ static int cmtp_session(void *arg) up_write(&cmtp_session_sem); kfree(session); + module_put_and_exit(0); return 0; } @@ -376,9 +375,11 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock) __cmtp_link_session(session); + __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); if (IS_ERR(session->task)) { + module_put(THIS_MODULE); err = PTR_ERR(session->task); goto unlink; } -- cgit v0.10.2 From 9b338c3dd12918f7f7df2b882f63f71e9efbcb41 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 19 Nov 2011 13:23:33 +0100 Subject: Bluetooth: bnep: Fix module reference We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c index 91bcd3a..1eea820 100644 --- a/net/bluetooth/bnep/core.c +++ b/net/bluetooth/bnep/core.c @@ -79,17 +79,12 @@ static struct bnep_session *__bnep_get_session(u8 *dst) static void __bnep_link_session(struct bnep_session *s) { - /* It's safe to call __module_get() here because sessions are added - by the socket layer which has to hold the reference to this module. - */ - __module_get(THIS_MODULE); list_add(&s->list, &bnep_session_list); } static void __bnep_unlink_session(struct bnep_session *s) { list_del(&s->list); - module_put(THIS_MODULE); } static int bnep_send(struct bnep_session *s, void *data, size_t len) @@ -530,6 +525,7 @@ static int bnep_session(void *arg) up_write(&bnep_session_sem); free_netdev(dev); + module_put_and_exit(0); return 0; } @@ -616,9 +612,11 @@ int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock) __bnep_link_session(s); + __module_get(THIS_MODULE); s->task = kthread_run(bnep_session, s, "kbnepd %s", dev->name); if (IS_ERR(s->task)) { /* Session thread start failed, gotta cleanup. */ + module_put(THIS_MODULE); unregister_netdev(dev); __bnep_unlink_session(s); err = PTR_ERR(s->task); -- cgit v0.10.2 From ed3e80c4c991a52f9fce3421536a78e331ae0949 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 11:55:41 +0000 Subject: ASoC: Ensure WM8731 register cache is synced when resuming from disabled Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 7e5ec03..a7c9ae1 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -453,6 +453,7 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec, snd_soc_write(codec, WM8731_PWR, 0xffff); regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + codec->cache_sync = 1; break; } codec->dapm.bias_level = level; -- cgit v0.10.2 From 6e58ad69efe9f4c91eb15f6bc365293414c397ce Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Mon, 21 Nov 2011 12:09:19 -0500 Subject: ext4: fix up a undefined error in ext4_free_blocks in debugging code sbi is not defined, so let ext4_free_blocks use EXT4_SB(sb) instead when EXT4FS_DEBUG is defined. Signed-off-by: Yongqiang Yang diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index f6dba45..12ccacd 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -565,7 +565,7 @@ ext4_fsblk_t ext4_count_free_clusters(struct super_block *sb) brelse(bitmap_bh); printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu" ", computed = %llu, %llu\n", - EXT4_B2C(sbi, ext4_free_blocks_count(es)), + EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)), desc_count, bitmap_count); return bitmap_count; #else -- cgit v0.10.2 From 648ae8e53d58ed1b667db173a2d4ff2132a3b529 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Wed, 9 Nov 2011 19:37:35 +0100 Subject: netfilter: ipset: suppress compile-time warnings in ip_set_hash_ipport*.c warning: 'ip_to' may be used uninitialized in this function Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index 6ee10f5..37d667e 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -158,7 +158,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipport4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index fb90e34..e69e271 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -162,7 +162,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportip4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index deb3e3d..64199b4 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -184,7 +184,7 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportnet4_elem data = { .cidr = HOST_MASK }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 ip2_from = 0, ip2_to, ip2_last, ip2; u32 timeout = h->timeout; bool with_ports = false; -- cgit v0.10.2 From 5e2afba4ecd7931ea06e6fa116ab28e6943dbd42 Mon Sep 17 00:00:00 2001 From: Paul Guo Date: Mon, 14 Nov 2011 19:00:54 +0800 Subject: netfilter: possible unaligned packet header in ip_route_me_harder This patch tries to fix the following issue in netfilter: In ip_route_me_harder(), we invoke pskb_expand_head() that rellocates new header with additional head room which can break the alignment of the original packet header. In one of my NAT test case, the NIC port for internal hosts is configured with vlan and the port for external hosts is with general configuration. If we ping an external "unknown" hosts from an internal host, an icmp packet will be sent. We find that in icmp_send()->...->ip_route_me_harder()->pskb_expand_head(), hh_len=18 and current headroom (skb_headroom(skb)) of the packet is 16. After calling pskb_expand_head() the packet header becomes to be unaligned and then our system (arch/tile) panics immediately. Signed-off-by: Paul Guo Acked-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c index 9899619..4f47e06 100644 --- a/net/ipv4/netfilter.c +++ b/net/ipv4/netfilter.c @@ -64,7 +64,8 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type) /* Change in oif may mean change in hh_len. */ hh_len = skb_dst(skb)->dev->hard_header_len; if (skb_headroom(skb) < hh_len && - pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC)) + pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)), + 0, GFP_ATOMIC)) return -1; return 0; -- cgit v0.10.2 From 904603f9b78f94d5a5fe29cf2f9694ef7f6f4420 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 17 Nov 2011 14:53:36 -0800 Subject: mac80211: Fix AMSDU rate printout in debugfs. It was flipped. See section 7.3.2.56 of the 802.11n spec for details. Signed-off-by: Ben Greear Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index c5f3417..3110cbd 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -274,9 +274,9 @@ static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf, PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack"); - PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " - "3839 bytes"); PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: " + "3839 bytes"); + PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " "7935 bytes"); /* -- cgit v0.10.2 From 9c8f2c42c93f415771d6d7b87a0881ba0bb72824 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 18 Nov 2011 17:02:16 +0100 Subject: mac80211: Fix endian bug in radiotap header generation I intoduced this bug in commit a2fe81667410723d941a688e1958a49d67ca3346 "mac80211: Build TX radiotap header dynamically" Signed-off-by: Helmut Schaa Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/status.c b/net/mac80211/status.c index df643ce..5533a74 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -259,7 +259,7 @@ static void ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_radiotap_header *rthdr; unsigned char *pos; - __le16 txflags; + u16 txflags; rthdr = (struct ieee80211_radiotap_header *) skb_push(skb, rtap_len); @@ -289,13 +289,13 @@ static void ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band txflags = 0; if (!(info->flags & IEEE80211_TX_STAT_ACK) && !is_multicast_ether_addr(hdr->addr1)) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); + txflags |= IEEE80211_RADIOTAP_F_TX_FAIL; if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); + txflags |= IEEE80211_RADIOTAP_F_TX_CTS; else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + txflags |= IEEE80211_RADIOTAP_F_TX_RTS; put_unaligned_le16(txflags, pos); pos += 2; -- cgit v0.10.2 From de3584bd62d87b4c250129fbc46ca52c80330add Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 21 Nov 2011 10:44:00 +0100 Subject: cfg80211: fix regulatory NULL dereference By the time userspace returns with a response to the regulatory domain request, the wiphy causing the request might have gone away. If this is so, reject the update but mark the request as having been processed anyway. Cc: Luis R. Rodriguez Signed-off-by: Johannes Berg Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bc1ec2c..186b7f2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2035,6 +2035,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (!request_wiphy) { + reg_set_request_processed(); + return -ENODEV; + } if (!last_request->intersect) { int r; -- cgit v0.10.2 From 40f9cd299a0e5e8dcdde9b5eb9bfda1cb9109f61 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 21 Nov 2011 17:47:13 +0300 Subject: prism54: potential memory corruption in prism54_get_essid() "dwrq->length" is the capped version of "essid->length". Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index d97a2caf..bc2ba80 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -778,7 +778,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, dwrq->flags = 0; dwrq->length = 0; } - essid->octets[essid->length] = '\0'; + essid->octets[dwrq->length] = '\0'; memcpy(extra, essid->octets, dwrq->length); kfree(essid); -- cgit v0.10.2 From 404ba2b8f611bea3228daf031f03901d0c34ecd7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 17:57:25 +0000 Subject: gpio: pca953x: Staticise pca953x_get_altdata() It's not used outside of the driver so doesn't need to be exported, and sparse notices this and complains about it. Signed-off-by: Mark Brown diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 147df8a..d3f3e8f 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -546,7 +546,7 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip) * Translate OpenFirmware node properties into platform_data * WARNING: This is DEPRECATED and will be removed eventually! */ -void +static void pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { struct device_node *node; @@ -574,7 +574,7 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) *invert = *val; } #else -void +static void pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { *gpio_base = -1; -- cgit v0.10.2 From ba9bb431d3156a1c5d4d6f0b8c23b5792e9e9f4f Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 17 Nov 2011 10:33:52 +0000 Subject: iseries_veth: Fix wrong parameter given to sizeof call "remote_list" is of type struct dma_chunk remote_list[VETH_MAX_FRAMES_PER_MSG]; Probably a copy'n'paste error. Signed-off-by: Thomas Jarosch Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/iseries_veth.c b/drivers/net/ethernet/ibm/iseries_veth.c index 4326681..acc31af 100644 --- a/drivers/net/ethernet/ibm/iseries_veth.c +++ b/drivers/net/ethernet/ibm/iseries_veth.c @@ -1421,7 +1421,7 @@ static void veth_receive(struct veth_lpar_connection *cnx, /* FIXME: do we need this? */ memset(local_list, 0, sizeof(local_list)); - memset(remote_list, 0, sizeof(VETH_MAX_FRAMES_PER_MSG)); + memset(remote_list, 0, sizeof(remote_list)); /* a 0 address marks the end of the valid entries */ if (senddata->addr[startchunk] == 0) -- cgit v0.10.2 From 24a70313969fc3fc440216b40babdb42564acff3 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 21 Nov 2011 09:39:11 -0500 Subject: Btrfs: remove free-space-cache.c WARN during log replay The log replay code only partially loads block groups, since the block group caching code is able to detect and deal with extents the logging code has pinned down. While the logging code is pinning down block groups, there is a bogus WARN_ON we're hitting if the code wasn't able to find an extent in the cache. This commit removes the warning because it can happen any time there isn't a valid free space cache for that block group. Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index aedacdb..6e5b7e4 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1849,7 +1849,13 @@ again: info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { - WARN_ON(1); + /* the tree logging code might be calling us before we + * have fully loaded the free space rbtree for this + * block group. So it is possible the entry won't + * be in the rbtree yet at all. The caching code + * will make sure not to put it in the rbtree if + * the logging code has pinned it. + */ goto out_lock; } } -- cgit v0.10.2 From cc11f9edd919002d8b3a03601a181a449150defd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 03:52:18 +0000 Subject: fix braino in um patchset (mea culpa) wrong register returned... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h index 118c143..2c32df6 100644 --- a/arch/x86/um/asm/processor.h +++ b/arch/x86/um/asm/processor.h @@ -11,7 +11,7 @@ #endif #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP) -#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP) +#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP) #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP) #define ARCH_IS_STACKGROW(address) \ -- cgit v0.10.2 From 4f795b25eaf1109c77abfc3b57cef9b993f3aede Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 18 Nov 2011 05:00:20 +0000 Subject: stmmac: mask mmc interrupts We need to mask the MMC irq otherwise if we raise the mmc interrupts that are not handled the driver loops in the handler. In fact, by default all mmc counters (only used for stats) are managed in SW and registers are cleared on each READ. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8ea770a..72cd190 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -781,10 +781,15 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - /* Do not manage MMC IRQ (FIXME) */ + /* Mask MMC irq, counters are managed in SW and registers + * are cleared on each READ eventually. */ dwmac_mmc_intr_all_mask(priv->ioaddr); - dwmac_mmc_ctrl(priv->ioaddr, mode); - memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + + if (priv->dma_cap.rmon) { + dwmac_mmc_ctrl(priv->ioaddr, mode); + memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + } else + pr_info(" No MAC Management Counters available"); } static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) @@ -1012,8 +1017,7 @@ static int stmmac_open(struct net_device *dev) memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); priv->xstats.threshold = tc; - if (priv->dma_cap.rmon) - stmmac_mmc_setup(priv); + stmmac_mmc_setup(priv); /* Start the ball rolling... */ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); -- cgit v0.10.2 From 5ccb3ea72097ee0c8ea1f200a2ade101caf08aa4 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 18 Nov 2011 05:42:05 +0000 Subject: xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop() Signed-off-by: Jan Beulich Signed-off-by: Ian Campbell Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 0cb594c..1ae270e 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1021,7 +1021,7 @@ static int xen_netbk_tx_check_gop(struct xen_netbk *netbk, pending_idx = *((u16 *)skb->data); xen_netbk_idx_release(netbk, pending_idx); for (j = start; j < i; j++) { - pending_idx = frag_get_pending_idx(&shinfo->frags[i]); + pending_idx = frag_get_pending_idx(&shinfo->frags[j]); xen_netbk_idx_release(netbk, pending_idx); } -- cgit v0.10.2 From fbe54e3b7a7ad7de92b65e8b10fae300eeec6ef3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 20 Nov 2011 11:07:09 +0000 Subject: net, sja1000: Don't include version.h in peak_pci.c when not needed It was pointed out by "make versioncheck" that we do not need to include version.h in drivers/net/can/sja1000/peak_pci.c This patch removes the unneeded include. Signed-off-by: Jesper Juhl Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 905bce0..2c7f503 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -20,7 +20,6 @@ */ #include -#include #include #include #include -- cgit v0.10.2 From 525c6465d449cdec04b3c91733e46027a4d08422 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Mon, 21 Nov 2011 16:45:26 -0500 Subject: dccp: fix error propagation in dccp_v4_connect The errcode is not updated when ip_route_newports() fails. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 90a919a..3f4e541 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -111,6 +111,7 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) rt = ip_route_newports(fl4, rt, orig_sport, orig_dport, inet->inet_sport, inet->inet_dport, sk); if (IS_ERR(rt)) { + err = PTR_ERR(rt); rt = NULL; goto failure; } -- cgit v0.10.2 From f23aa62545c18728eb2b9434aa258be27e07dd49 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 21 Nov 2011 16:46:24 -0500 Subject: caif: fix endian conversion in cffrml_transmit() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "tmp" variable here is used to store the result of cpu_to_le16() so it should be an __le16 instead of an int. We want the high bits set and the current code works on little endian systems but not on big endian systems. Signed-off-by: Dan Carpenter Acked-by: Sjur Brændeland Signed-off-by: David S. Miller diff --git a/net/caif/cffrml.c b/net/caif/cffrml.c index f399211..d3ca87b 100644 --- a/net/caif/cffrml.c +++ b/net/caif/cffrml.c @@ -136,20 +136,21 @@ static int cffrml_receive(struct cflayer *layr, struct cfpkt *pkt) static int cffrml_transmit(struct cflayer *layr, struct cfpkt *pkt) { - int tmp; u16 chks; u16 len; + __le16 data; + struct cffrml *this = container_obj(layr); if (this->dofcs) { chks = cfpkt_iterate(pkt, cffrml_checksum, 0xffff); - tmp = cpu_to_le16(chks); - cfpkt_add_trail(pkt, &tmp, 2); + data = cpu_to_le16(chks); + cfpkt_add_trail(pkt, &data, 2); } else { cfpkt_pad_trail(pkt, 2); } len = cfpkt_getlen(pkt); - tmp = cpu_to_le16(len); - cfpkt_add_head(pkt, &tmp, 2); + data = cpu_to_le16(len); + cfpkt_add_head(pkt, &data, 2); cfpkt_info(pkt)->hdr_len += 2; if (cfpkt_erroneous(pkt)) { pr_err("Packet is erroneous!\n"); -- cgit v0.10.2 From c332c10c01d8d31f2eba9abc04b0fc3d62610ed8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 16:48:28 -0500 Subject: microblaze: bury asm/namei.h altroot support has been gone for years, along with arch/*/asm/namei.h; looks like a dummy survivor that sat it out in microblaze tree... Signed-off-by: Al Viro diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h deleted file mode 100644 index 61d60b8..0000000 --- a/arch/microblaze/include/asm/namei.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_NAMEI_H -#define _ASM_MICROBLAZE_NAMEI_H - -#ifdef __KERNEL__ - -/* This dummy routine maybe changed to something useful - * for /usr/gnemul/ emulation stuff. - * Look at asm-sparc/namei.h for details. - */ -#define __emul_prefix() NULL - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_NAMEI_H */ -- cgit v0.10.2 From b46413367961c2e8bd827e067a231be982aaeee2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Nov 2011 17:25:37 -0500 Subject: iio: fix a leak due to improper use of anon_inode_getfd() it can fail and in that case ->release() will *not* be called... Signed-off-by: Al Viro diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 326e967..2656409 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -242,6 +242,8 @@ static const struct file_operations iio_event_chrdev_fileops = { static int iio_event_getfd(struct iio_dev *indio_dev) { + int fd; + if (indio_dev->event_interface == NULL) return -ENODEV; @@ -252,9 +254,15 @@ static int iio_event_getfd(struct iio_dev *indio_dev) return -EBUSY; } mutex_unlock(&indio_dev->event_interface->event_list_lock); - return anon_inode_getfd("iio:event", + fd = anon_inode_getfd("iio:event", &iio_event_chrdev_fileops, indio_dev->event_interface, O_RDONLY); + if (fd < 0) { + mutex_lock(&indio_dev->event_interface->event_list_lock); + clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags); + mutex_unlock(&indio_dev->event_interface->event_list_lock); + } + return fd; } static int __init iio_init(void) -- cgit v0.10.2 From 70e9942f17a6193e9172a804e6569a8806633d6b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 22 Nov 2011 00:16:51 +0100 Subject: netfilter: nf_conntrack: make event callback registration per-netns This patch fixes an oops that can be triggered following this recipe: 0) make sure nf_conntrack_netlink and nf_conntrack_ipv4 are loaded. 1) container is started. 2) connect to it via lxc-console. 3) generate some traffic with the container to create some conntrack entries in its table. 4) stop the container: you hit one oops because the conntrack table cleanup tries to report the destroy event to user-space but the per-netns nfnetlink socket has already gone (as the nfnetlink socket is per-netns but event callback registration is global). To fix this situation, we make the ctnl_notifier per-netns so the callback is registered/unregistered if the container is created/destroyed. Alex Bligh and Alexey Dobriyan originally proposed one small patch to check if the nfnetlink socket is gone in nfnetlink_has_listeners, but this is a very visited path for events, thus, it may reduce performance and it looks a bit hackish to check for the nfnetlink socket only to workaround this situation. As a result, I decided to follow the bigger path choice, which seems to look nicer to me. Cc: Alexey Dobriyan Reported-by: Alex Bligh Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 4283508..a88fb69 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -67,18 +67,18 @@ struct nf_ct_event_notifier { int (*fcn)(unsigned int events, struct nf_ct_event *item); }; -extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; -extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); -extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); +extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb); extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_ecache *e; - if (nf_conntrack_event_cb == NULL) + if (net->ct.nf_conntrack_event_cb == NULL) return; e = nf_ct_ecache_find(ct); @@ -95,11 +95,12 @@ nf_conntrack_eventmask_report(unsigned int eventmask, int report) { int ret = 0; + struct net *net = nf_ct_net(ct); struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -164,9 +165,8 @@ struct nf_exp_event_notifier { int (*fcn)(unsigned int events, struct nf_exp_event *item); }; -extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb; -extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); -extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); +extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -174,11 +174,12 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { + struct net *net = nf_ct_exp_net(exp); struct nf_exp_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_expect_event_cb); + notify = rcu_dereference(net->ct.nf_expect_event_cb); if (notify == NULL) goto out_unlock; diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 0249399..7a911ec 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -18,6 +18,8 @@ struct netns_ct { struct hlist_nulls_head unconfirmed; struct hlist_nulls_head dying; struct ip_conntrack_stat __percpu *stat; + struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; + struct nf_exp_event_notifier __rcu *nf_expect_event_cb; int sysctl_events; unsigned int sysctl_events_retry_timeout; int sysctl_acct; diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c index 6b368be..b62c414 100644 --- a/net/netfilter/nf_conntrack_ecache.c +++ b/net/netfilter/nf_conntrack_ecache.c @@ -27,22 +27,17 @@ static DEFINE_MUTEX(nf_ct_ecache_mutex); -struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_conntrack_event_cb); - -struct nf_exp_event_notifier __rcu *nf_expect_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_expect_event_cb); - /* deliver cached events and clear cache entry - must be called with locally * disabled softirqs */ void nf_ct_deliver_cached_events(struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); unsigned long events; struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -83,19 +78,20 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events); -int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new) +int nf_conntrack_register_notifier(struct net *net, + struct nf_ct_event_notifier *new) { int ret = 0; struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_conntrack_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -105,32 +101,34 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier); -void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new) +void nf_conntrack_unregister_notifier(struct net *net, + struct nf_ct_event_notifier *new) { struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_conntrack_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier); -int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new) +int nf_ct_expect_register_notifier(struct net *net, + struct nf_exp_event_notifier *new) { int ret = 0; struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_expect_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -140,15 +138,16 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier); -void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new) +void nf_ct_expect_unregister_notifier(struct net *net, + struct nf_exp_event_notifier *new) { struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_expect_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index e58aa9b..ef21b22 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -4,7 +4,7 @@ * (C) 2001 by Jay Schulist * (C) 2002-2006 by Harald Welte * (C) 2003 by Patrick Mchardy - * (C) 2005-2008 by Pablo Neira Ayuso + * (C) 2005-2011 by Pablo Neira Ayuso * * Initial connection tracking via netlink development funded and * generally made possible by Network Robots, Inc. (www.networkrobots.com) @@ -2163,6 +2163,54 @@ MODULE_ALIAS("ip_conntrack_netlink"); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP); +static int __net_init ctnetlink_net_init(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + int ret; + + ret = nf_conntrack_register_notifier(net, &ctnl_notifier); + if (ret < 0) { + pr_err("ctnetlink_init: cannot register notifier.\n"); + goto err_out; + } + + ret = nf_ct_expect_register_notifier(net, &ctnl_notifier_exp); + if (ret < 0) { + pr_err("ctnetlink_init: cannot expect register notifier.\n"); + goto err_unreg_notifier; + } +#endif + return 0; + +#ifdef CONFIG_NF_CONNTRACK_EVENTS +err_unreg_notifier: + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +err_out: + return ret; +#endif +} + +static void ctnetlink_net_exit(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + nf_ct_expect_unregister_notifier(net, &ctnl_notifier_exp); + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +#endif +} + +static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list) +{ + struct net *net; + + list_for_each_entry(net, net_exit_list, exit_list) + ctnetlink_net_exit(net); +} + +static struct pernet_operations ctnetlink_net_ops = { + .init = ctnetlink_net_init, + .exit_batch = ctnetlink_net_exit_batch, +}; + static int __init ctnetlink_init(void) { int ret; @@ -2180,28 +2228,15 @@ static int __init ctnetlink_init(void) goto err_unreg_subsys; } -#ifdef CONFIG_NF_CONNTRACK_EVENTS - ret = nf_conntrack_register_notifier(&ctnl_notifier); - if (ret < 0) { - pr_err("ctnetlink_init: cannot register notifier.\n"); + if (register_pernet_subsys(&ctnetlink_net_ops)) { + pr_err("ctnetlink_init: cannot register pernet operations\n"); goto err_unreg_exp_subsys; } - ret = nf_ct_expect_register_notifier(&ctnl_notifier_exp); - if (ret < 0) { - pr_err("ctnetlink_init: cannot expect register notifier.\n"); - goto err_unreg_notifier; - } -#endif - return 0; -#ifdef CONFIG_NF_CONNTRACK_EVENTS -err_unreg_notifier: - nf_conntrack_unregister_notifier(&ctnl_notifier); err_unreg_exp_subsys: nfnetlink_subsys_unregister(&ctnl_exp_subsys); -#endif err_unreg_subsys: nfnetlink_subsys_unregister(&ctnl_subsys); err_out: @@ -2213,11 +2248,7 @@ static void __exit ctnetlink_exit(void) pr_info("ctnetlink: unregistering from nfnetlink.\n"); nf_ct_remove_userspace_expectations(); -#ifdef CONFIG_NF_CONNTRACK_EVENTS - nf_ct_expect_unregister_notifier(&ctnl_notifier_exp); - nf_conntrack_unregister_notifier(&ctnl_notifier); -#endif - + unregister_pernet_subsys(&ctnetlink_net_ops); nfnetlink_subsys_unregister(&ctnl_exp_subsys); nfnetlink_subsys_unregister(&ctnl_subsys); } -- cgit v0.10.2 From 74a0efdef1df7f576116811234ebedd8a1255ebc Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Tue, 15 Nov 2011 17:32:23 +0530 Subject: video:da8xx-fb: Disable and reset sequence on version2 of LCDC Patch follows the disable and software reset sequence specified in version2 to LCDC functional specification. Without this flicker is observed on re-enabling the LCDC. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Florian Tobias Schandinat diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 55f91d9..29577bf 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -116,6 +116,7 @@ /* Clock registers available only on Version 2 */ #define LCD_CLK_ENABLE_REG 0x6c #define LCD_CLK_RESET_REG 0x70 +#define LCD_CLK_MAIN_RESET BIT(3) #define LCD_NUM_BUFFERS 2 @@ -244,6 +245,10 @@ static inline void lcd_enable_raster(void) { u32 reg; + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, LCD_CLK_RESET_REG); + reg = lcdc_read(LCD_RASTER_CTRL_REG); if (!(reg & LCD_RASTER_ENABLE)) lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); @@ -257,6 +262,10 @@ static inline void lcd_disable_raster(void) reg = lcdc_read(LCD_RASTER_CTRL_REG); if (reg & LCD_RASTER_ENABLE) lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); + + if (lcd_revision == LCD_VERSION_2) + /* Write 1 to reset LCDC */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); } static void lcd_blit(int load_mode, struct da8xx_fb_par *par) @@ -584,8 +593,12 @@ static void lcd_reset(struct da8xx_fb_par *par) lcdc_write(0, LCD_DMA_CTRL_REG); lcdc_write(0, LCD_RASTER_CTRL_REG); - if (lcd_revision == LCD_VERSION_2) + if (lcd_revision == LCD_VERSION_2) { lcdc_write(0, LCD_INT_ENABLE_SET_REG); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); + lcdc_write(0, LCD_CLK_RESET_REG); + } } static void lcd_calc_clk_divider(struct da8xx_fb_par *par) -- cgit v0.10.2 From a32839696a8eef813a1aff604fbad9a32dff6c95 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 21 Nov 2011 15:05:56 +0000 Subject: viafb: correct sync polarity for OLPC DCON While the OLPC display appears to be able to handle either positive or negative sync, the Display Controller only recognises positive sync. This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and fixes a recent regression where the XO-1.5 DCON could no longer be frozen. Thanks to Florian Tobias Schandinat for helping identify the fix. Test case: from a vt, echo 1 > /sys/devices/platform/dcon/freeze should cause the current screen contents to freeze, rather than garbage being displayed. Signed-off-by: Daniel Drake Signed-off-by: Florian Tobias Schandinat Cc: stable@kernel.org diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h index 69d882c..c01c1c1 100644 --- a/drivers/video/via/share.h +++ b/drivers/video/via/share.h @@ -559,8 +559,8 @@ #define M1200X720_R60_VSP POSITIVE /* 1200x900@60 Sync Polarity (DCON) */ -#define M1200X900_R60_HSP NEGATIVE -#define M1200X900_R60_VSP NEGATIVE +#define M1200X900_R60_HSP POSITIVE +#define M1200X900_R60_VSP POSITIVE /* 1280x600@60 Sync Polarity (GTF Mode) */ #define M1280x600_R60_HSP NEGATIVE -- cgit v0.10.2 From 05c7cc9ccab7d9229fdae68d7d6231edd2c93741 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Mon, 21 Nov 2011 16:15:36 +0100 Subject: ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards Commit c09403dcc5698abf214329fbbf3cf8dbb5558bea has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index e760ada..19ee220 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6518,7 +6518,7 @@ static int __devinit snd_hdspm_create(struct snd_card *card, hdspm->io_type = AES32; hdspm->card_name = "RME AES32"; hdspm->midiPorts = 2; - } else if ((hdspm->firmware_rev == 0xd5) || + } else if ((hdspm->firmware_rev == 0xd2) || ((hdspm->firmware_rev >= 0xc8) && (hdspm->firmware_rev <= 0xcf))) { hdspm->io_type = MADI; -- cgit v0.10.2 From e760b5260d39113794da17c64cbd6e6311155b66 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 21 Nov 2011 14:34:05 +0100 Subject: ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' Commit 27ad4bf72a ("ARM: imx: move mx3 support to mach-imx") kept ARCH_MX31 and ARCH_MX35 'for compatibility'. Now that they aren't actually used anymore, they can be dropped entirely. Signed-off-by: Paul Bolle Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5f7f9c2..c44aa97 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -10,11 +10,6 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC bool -# -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 config ARCH_MX1 bool @@ -27,12 +22,6 @@ config ARCH_MX25 config MACH_MX27 bool -config ARCH_MX31 - bool - -config ARCH_MX35 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -72,7 +61,6 @@ config SOC_IMX31 select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 select MXC_AVIC select SMP_ON_UP if SMP @@ -82,7 +70,6 @@ config SOC_IMX35 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT - select ARCH_MX35 select MXC_AVIC select SMP_ON_UP if SMP -- cgit v0.10.2 From adf792928d1c57f31b92b7908a5ba383e9f05373 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 22 Nov 2011 10:04:46 +0100 Subject: MAINTAINERS: Add missing directory arch/arm/mach-imx/ is part of the i.MX support. Add it. Signed-off-by: Sascha Hauer diff --git a/MAINTAINERS b/MAINTAINERS index 071a996..c9ae02a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -789,6 +789,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-mx*/ +F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ ARM/FREESCALE IMX51 -- cgit v0.10.2 From ca06679d758933b726c2677b523a26bc581eadcf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 21 Nov 2011 16:26:52 -0200 Subject: ARM: mx5: Fix checkpatch warnings in cpu-imx5.c Fix the following warnings reported by checkpatch: WARNING: Use #include instead of #19: FILE: arm/mach-imx/cpu-imx5.c:19: +#include WARNING: line over 80 characters #70: FILE: arm/mach-imx/cpu-imx5.c:70: + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 5c53282..5e2e7a8 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static int mx5_cpu_rev = -1; @@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void) if (!cpu_is_mx51()) return 0; - if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && + (elf_hwcap & HWCAP_NEON)) { elf_hwcap &= ~HWCAP_NEON; pr_info("Turning off NEON support, detected broken NEON implementation\n"); } -- cgit v0.10.2 From 87514fced7c347a7cdd8a7a346d935a168428ff7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 22 Nov 2011 10:07:26 +0100 Subject: ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes building a kernel for only one of the two SOCs. Without this patch an i.MX31 only build fails with: arch/arm/mach-imx/built-in.o: In function `imx35_init_early': mach-bug.c:(.init.text+0x2c): undefined reference to `mxc_iomux_v3_init' arch/arm/mach-imx/built-in.o: In function `imx35_soc_init': mach-bug.c:(.init.text+0xe4): undefined reference to `mx35_revision' Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82e..72613c4 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,6 +108,7 @@ void imx3_init_l2x0(void) l2x0_init(l2x0_base, 0x00030024, 0x00000000); } +#ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), @@ -126,19 +127,6 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); @@ -147,25 +135,11 @@ void __init imx31_init_early(void) imx_ioremap = imx3_ioremap; } -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; - imx_ioremap = imx3_ioremap; -} - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { .per_2_per_addr = 1677, }; @@ -199,6 +173,35 @@ void __init imx31_soc_init(void) imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + imx_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { .ap_2_ap_addr = 642, @@ -254,3 +257,4 @@ void __init imx35_soc_init(void) imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX35 */ -- cgit v0.10.2 From 807dfe7041fb1ff2b076b999800553440e61234d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 8 Oct 2011 17:16:49 +0200 Subject: ARM: imx: export imx_ioremap The arch_ioremap function on i.MX is now an indirect function pointer. In order to use it from any loadable module, the pointer itself has to be exported. ERROR: "imx_ioremap" [drivers/video/tmiofb.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/sl811-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/r8a66597-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/host/oxu210hp-hcd.ko] undefined! ERROR: "imx_ioremap" [drivers/usb/gadget/r8a66597-udc.ko] undefined! Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dc..45e1b5f 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -30,6 +31,7 @@ void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; +EXPORT_SYMBOL_GPL(imx_ioremap); static void __iomem *wdog_base; -- cgit v0.10.2 From c6e8453e7511001e453f8b20b9ceefd231946867 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 18 Nov 2011 16:59:32 -0600 Subject: ALSA: hda - repoll ELD content for multiple times Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 9850c5b..c505fd5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -69,6 +69,7 @@ struct hdmi_spec_per_pin { struct hda_codec *codec; struct hdmi_eld sink_eld; struct delayed_work work; + int repoll_count; }; struct hdmi_spec { @@ -748,7 +749,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx, * Unsolicited events */ -static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry); +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll); static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) { @@ -766,7 +767,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) if (pin_idx < 0) return; - hdmi_present_sense(&spec->pins[pin_idx], true); + hdmi_present_sense(&spec->pins[pin_idx], 1); } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) @@ -960,7 +961,7 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) return 0; } -static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) +static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) { struct hda_codec *codec = per_pin->codec; struct hdmi_eld *eld = &per_pin->sink_eld; @@ -989,7 +990,7 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry) if (eld_valid) { if (!snd_hdmi_get_eld(eld, codec, pin_nid)) snd_hdmi_show_eld(eld); - else if (retry) { + else if (repoll) { queue_delayed_work(codec->bus->workq, &per_pin->work, msecs_to_jiffies(300)); @@ -1004,7 +1005,10 @@ static void hdmi_repoll_eld(struct work_struct *work) struct hdmi_spec_per_pin *per_pin = container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); - hdmi_present_sense(per_pin, false); + if (per_pin->repoll_count++ > 6) + per_pin->repoll_count = 0; + + hdmi_present_sense(per_pin, per_pin->repoll_count); } static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) @@ -1235,7 +1239,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx) if (err < 0) return err; - hdmi_present_sense(per_pin, false); + hdmi_present_sense(per_pin, 0); return 0; } -- cgit v0.10.2 From afd00d7235c1989d06d75cf8ac3d7722fcf2f394 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Tue, 22 Nov 2011 11:15:44 +0100 Subject: ALSA: lx6464es - command buffer API cleanup the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c index 5c8717e..ad52f41 100644 --- a/sound/pci/lx6464es/lx_core.c +++ b/sound/pci/lx6464es/lx_core.c @@ -78,7 +78,8 @@ unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port) return ioread32(address); } -void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len) +static void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, + u32 len) { void __iomem *address = lx_dsp_register(chip, port); memcpy_fromio(data, address, len*sizeof(u32)); @@ -91,8 +92,8 @@ void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data) iowrite32(data, address); } -void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, - u32 len) +static void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, + const u32 *data, u32 len) { void __iomem *address = lx_dsp_register(chip, port); memcpy_toio(address, data, len*sizeof(u32)); diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h index 1dd5629..4d7ff79 100644 --- a/sound/pci/lx6464es/lx_core.h +++ b/sound/pci/lx6464es/lx_core.h @@ -72,10 +72,7 @@ enum { }; unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port); -void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len); void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data); -void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, - u32 len); /* plx register access */ enum { -- cgit v0.10.2 From a29878553a9a7b4c06f93c7e383527cf014d4ceb Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Tue, 22 Nov 2011 11:15:45 +0100 Subject: ALSA: lx6464es - fix device communication via command bus commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c index ad52f41..8c3e7fc 100644 --- a/sound/pci/lx6464es/lx_core.c +++ b/sound/pci/lx6464es/lx_core.c @@ -81,8 +81,12 @@ unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port) static void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len) { - void __iomem *address = lx_dsp_register(chip, port); - memcpy_fromio(data, address, len*sizeof(u32)); + u32 __iomem *address = lx_dsp_register(chip, port); + int i; + + /* we cannot use memcpy_fromio */ + for (i = 0; i != len; ++i) + data[i] = ioread32(address + i); } @@ -95,8 +99,12 @@ void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data) static void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data, u32 len) { - void __iomem *address = lx_dsp_register(chip, port); - memcpy_toio(address, data, len*sizeof(u32)); + u32 __iomem *address = lx_dsp_register(chip, port); + int i; + + /* we cannot use memcpy_to */ + for (i = 0; i != len; ++i) + iowrite32(data[i], address + i); } -- cgit v0.10.2 From a370fc62b9ad3f73abe2a721de6c03cdcce95b54 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 22 Nov 2011 16:46:23 +0800 Subject: ALSA: hda - fail ELD reading early With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 7ae7578..c1da422 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -347,18 +347,28 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld, for (i = 0; i < size; i++) { unsigned int val = hdmi_get_eld_data(codec, nid, i); + /* + * Graphics driver might be writing to ELD buffer right now. + * Just abort. The caller will repoll after a while. + */ if (!(val & AC_ELDD_ELD_VALID)) { - if (!i) { - snd_printd(KERN_INFO - "HDMI: invalid ELD data\n"); - ret = -EINVAL; - goto error; - } snd_printd(KERN_INFO "HDMI: invalid ELD data byte %d\n", i); - val = 0; - } else - val &= AC_ELDD_ELD_DATA; + ret = -EINVAL; + goto error; + } + val &= AC_ELDD_ELD_DATA; + /* + * The first byte cannot be zero. This can happen on some DVI + * connections. Some Intel chips may also need some 250ms delay + * to return non-zero ELD data, even when the graphics driver + * correctly writes ELD content before setting ELD_valid bit. + */ + if (!val && !i) { + snd_printdd(KERN_INFO "HDMI: 0 ELD data\n"); + ret = -EINVAL; + goto error; + } buf[i] = val; } -- cgit v0.10.2 From 72531c9434fa884d20cb3c36fcec83752f32fdf4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 22 Nov 2011 09:46:51 +0800 Subject: ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET According to the datasheet: The BIT[5:4] of ADC Control Register 2 is to control the word width. 00 = 25 Bits 01 = 20 Bits 10 = 16 Bits 11 = Invalid Thus, the AD1836_ADC_WORD_OFFSET should be defined as 4. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h index 444747f..dd7be0d 100644 --- a/sound/soc/codecs/ad1836.h +++ b/sound/soc/codecs/ad1836.h @@ -34,7 +34,7 @@ #define AD1836_ADC_CTRL2 13 #define AD1836_ADC_WORD_LEN_MASK 0x30 -#define AD1836_ADC_WORD_OFFSET 5 +#define AD1836_ADC_WORD_OFFSET 4 #define AD1836_ADC_SERFMT_MASK (7 << 6) #define AD1836_ADC_SERFMT_PCK256 (0x4 << 6) #define AD1836_ADC_SERFMT_PCK128 (0x5 << 6) -- cgit v0.10.2 From 5c4b2aa3fd1dc30af098de5dec766a817621ace2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 22 Nov 2011 14:47:44 +0800 Subject: ASoC: max9877: Update register if either val or val2 is changed In the case of ((max9877_regs[reg] >> shift) & mask) != val but ((max9877_regs[reg2] >> shift) & mask) == val2, current code does not update the registers. Fix the logic to update registers if either val or val2 is changed. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c index 9e7e964..dcf6f2a 100644 --- a/sound/soc/codecs/max9877.c +++ b/sound/soc/codecs/max9877.c @@ -106,13 +106,13 @@ static int max9877_set_2reg(struct snd_kcontrol *kcontrol, unsigned int mask = mc->max; unsigned int val = (ucontrol->value.integer.value[0] & mask); unsigned int val2 = (ucontrol->value.integer.value[1] & mask); - unsigned int change = 1; + unsigned int change = 0; - if (((max9877_regs[reg] >> shift) & mask) == val) - change = 0; + if (((max9877_regs[reg] >> shift) & mask) != val) + change = 1; - if (((max9877_regs[reg2] >> shift) & mask) == val2) - change = 0; + if (((max9877_regs[reg2] >> shift) & mask) != val2) + change = 1; if (change) { max9877_regs[reg] &= ~(mask << shift); -- cgit v0.10.2 From 90459ce06f410b983540be56209c0abcbce23944 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Thu, 4 Aug 2011 11:02:33 +0200 Subject: percpu: rename pcpu_mem_alloc to pcpu_mem_zalloc Currently pcpu_mem_alloc() is implemented always return zeroed memory. So rename it to make user like pcpu_get_pages_and_bitmap() know don't reinit it. Signed-off-by: Bob Liu Reviewed-by: Pekka Enberg Reviewed-by: Michal Hocko Signed-off-by: Tejun Heo diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index ea53496..29e3730 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -50,14 +50,13 @@ static struct page **pcpu_get_pages_and_bitmap(struct pcpu_chunk *chunk, if (!pages || !bitmap) { if (may_alloc && !pages) - pages = pcpu_mem_alloc(pages_size); + pages = pcpu_mem_zalloc(pages_size); if (may_alloc && !bitmap) - bitmap = pcpu_mem_alloc(bitmap_size); + bitmap = pcpu_mem_zalloc(bitmap_size); if (!pages || !bitmap) return NULL; } - memset(pages, 0, pages_size); bitmap_copy(bitmap, chunk->populated, pcpu_unit_pages); *bitmapp = bitmap; diff --git a/mm/percpu.c b/mm/percpu.c index bf80e55..28c37a2 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -273,11 +273,11 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, (rs) = (re) + 1, pcpu_next_pop((chunk), &(rs), &(re), (end))) /** - * pcpu_mem_alloc - allocate memory + * pcpu_mem_zalloc - allocate memory * @size: bytes to allocate * * Allocate @size bytes. If @size is smaller than PAGE_SIZE, - * kzalloc() is used; otherwise, vmalloc() is used. The returned + * kzalloc() is used; otherwise, vzalloc() is used. The returned * memory is always zeroed. * * CONTEXT: @@ -286,7 +286,7 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, * RETURNS: * Pointer to the allocated area on success, NULL on failure. */ -static void *pcpu_mem_alloc(size_t size) +static void *pcpu_mem_zalloc(size_t size) { if (WARN_ON_ONCE(!slab_is_available())) return NULL; @@ -302,7 +302,7 @@ static void *pcpu_mem_alloc(size_t size) * @ptr: memory to free * @size: size of the area * - * Free @ptr. @ptr should have been allocated using pcpu_mem_alloc(). + * Free @ptr. @ptr should have been allocated using pcpu_mem_zalloc(). */ static void pcpu_mem_free(void *ptr, size_t size) { @@ -384,7 +384,7 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc) size_t old_size = 0, new_size = new_alloc * sizeof(new[0]); unsigned long flags; - new = pcpu_mem_alloc(new_size); + new = pcpu_mem_zalloc(new_size); if (!new) return -ENOMEM; @@ -604,11 +604,12 @@ static struct pcpu_chunk *pcpu_alloc_chunk(void) { struct pcpu_chunk *chunk; - chunk = pcpu_mem_alloc(pcpu_chunk_struct_size); + chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size); if (!chunk) return NULL; - chunk->map = pcpu_mem_alloc(PCPU_DFL_MAP_ALLOC * sizeof(chunk->map[0])); + chunk->map = pcpu_mem_zalloc(PCPU_DFL_MAP_ALLOC * + sizeof(chunk->map[0])); if (!chunk->map) { kfree(chunk); return NULL; @@ -1889,7 +1890,7 @@ void __init percpu_init_late(void) BUILD_BUG_ON(size > PAGE_SIZE); - map = pcpu_mem_alloc(size); + map = pcpu_mem_zalloc(size); BUG_ON(!map); spin_lock_irqsave(&pcpu_lock, flags); -- cgit v0.10.2 From a855b84c3d8c73220d4d3cd392a7bee7c83de70e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 18 Nov 2011 10:55:35 -0800 Subject: percpu: fix chunk range calculation Percpu allocator recorded the cpus which map to the first and last units in pcpu_first/last_unit_cpu respectively and used them to determine the address range of a chunk - e.g. it assumed that the first unit has the lowest address in a chunk while the last unit has the highest address. This simply isn't true. Groups in a chunk can have arbitrary positive or negative offsets from the previous one and there is no guarantee that the first unit occupies the lowest offset while the last one the highest. Fix it by actually comparing unit offsets to determine cpus occupying the lowest and highest offsets. Also, rename pcu_first/last_unit_cpu to pcpu_low/high_unit_cpu to avoid confusion. The chunk address range is used to flush cache on vmalloc area map/unmap and decide whether a given address is in the first chunk by per_cpu_ptr_to_phys() and the bug was discovered by invalid per_cpu_ptr_to_phys() translation for crash_note. Kudos to Dave Young for tracking down the problem. Signed-off-by: Tejun Heo Reported-by: WANG Cong Reported-by: Dave Young Tested-by: Dave Young LKML-Reference: <4EC21F67.10905@redhat.com> Cc: stable @kernel.org diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 29e3730..12a48a88 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -142,8 +142,8 @@ static void pcpu_pre_unmap_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_cache_vunmap( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } static void __pcpu_unmap_pages(unsigned long addr, int nr_pages) @@ -205,8 +205,8 @@ static void pcpu_post_unmap_tlb_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_tlb_kernel_range( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } static int __pcpu_map_pages(unsigned long addr, struct page **pages, @@ -283,8 +283,8 @@ static void pcpu_post_map_flush(struct pcpu_chunk *chunk, int page_start, int page_end) { flush_cache_vmap( - pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start), - pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end)); + pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start), + pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end)); } /** diff --git a/mm/percpu.c b/mm/percpu.c index 28c37a2..2473ff0 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -116,9 +116,9 @@ static int pcpu_atom_size __read_mostly; static int pcpu_nr_slots __read_mostly; static size_t pcpu_chunk_struct_size __read_mostly; -/* cpus with the lowest and highest unit numbers */ -static unsigned int pcpu_first_unit_cpu __read_mostly; -static unsigned int pcpu_last_unit_cpu __read_mostly; +/* cpus with the lowest and highest unit addresses */ +static unsigned int pcpu_low_unit_cpu __read_mostly; +static unsigned int pcpu_high_unit_cpu __read_mostly; /* the address of the first chunk which starts with the kernel static area */ void *pcpu_base_addr __read_mostly; @@ -985,19 +985,19 @@ phys_addr_t per_cpu_ptr_to_phys(void *addr) { void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr); bool in_first_chunk = false; - unsigned long first_start, first_end; + unsigned long first_low, first_high; unsigned int cpu; /* - * The following test on first_start/end isn't strictly + * The following test on unit_low/high isn't strictly * necessary but will speed up lookups of addresses which * aren't in the first chunk. */ - first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0); - first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu, - pcpu_unit_pages); - if ((unsigned long)addr >= first_start && - (unsigned long)addr < first_end) { + first_low = pcpu_chunk_addr(pcpu_first_chunk, pcpu_low_unit_cpu, 0); + first_high = pcpu_chunk_addr(pcpu_first_chunk, pcpu_high_unit_cpu, + pcpu_unit_pages); + if ((unsigned long)addr >= first_low && + (unsigned long)addr < first_high) { for_each_possible_cpu(cpu) { void *start = per_cpu_ptr(base, cpu); @@ -1234,7 +1234,9 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, for (cpu = 0; cpu < nr_cpu_ids; cpu++) unit_map[cpu] = UINT_MAX; - pcpu_first_unit_cpu = NR_CPUS; + + pcpu_low_unit_cpu = NR_CPUS; + pcpu_high_unit_cpu = NR_CPUS; for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) { const struct pcpu_group_info *gi = &ai->groups[group]; @@ -1254,9 +1256,13 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, unit_map[cpu] = unit + i; unit_off[cpu] = gi->base_offset + i * ai->unit_size; - if (pcpu_first_unit_cpu == NR_CPUS) - pcpu_first_unit_cpu = cpu; - pcpu_last_unit_cpu = cpu; + /* determine low/high unit_cpu */ + if (pcpu_low_unit_cpu == NR_CPUS || + unit_off[cpu] < unit_off[pcpu_low_unit_cpu]) + pcpu_low_unit_cpu = cpu; + if (pcpu_high_unit_cpu == NR_CPUS || + unit_off[cpu] > unit_off[pcpu_high_unit_cpu]) + pcpu_high_unit_cpu = cpu; } } pcpu_nr_units = unit; -- cgit v0.10.2 From d31da0f0ba3bc0a827a63879310818c22d9a95be Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 22 Nov 2011 12:31:21 -0500 Subject: mount_subtree() pointless use-after-free d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been overwritten by now... Signed-off-by: Al Viro diff --git a/fs/namespace.c b/fs/namespace.c index 50ee303..6d3a196 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2493,6 +2493,7 @@ EXPORT_SYMBOL(create_mnt_ns); struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) { struct mnt_namespace *ns; + struct super_block *s; struct path path; int err; @@ -2509,10 +2510,11 @@ struct dentry *mount_subtree(struct vfsmount *mnt, const char *name) return ERR_PTR(err); /* trade a vfsmount reference for active sb one */ - atomic_inc(&path.mnt->mnt_sb->s_active); + s = path.mnt->mnt_sb; + atomic_inc(&s->s_active); mntput(path.mnt); /* lock the sucker */ - down_write(&path.mnt->mnt_sb->s_umount); + down_write(&s->s_umount); /* ... and return the root of (sub)tree on it */ return path.dentry; } -- cgit v0.10.2 From e5a21327644adba32816f74a415114d11c57f2e9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 22 Nov 2011 18:01:46 +0000 Subject: ARM: perf: check that we have a platform device when reserving PMU Attempting to use a hardware counter on a platform with a supported PMU but where the platform_device (defining the interrupts) has not been registered results in a NULL pointer dereference. This patch fixes the problem by checking that we actually have a platform device registered before attempting to grab the interrupts. Reported-by: Pawel Moll Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index e508066..c475379 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -402,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) int i, err, irq, irqs; struct platform_device *pmu_device = armpmu->plat_device; + if (!pmu_device) + return -ENODEV; + err = reserve_pmu(armpmu->type); if (err) { pr_warning("unable to reserve pmu\n"); -- cgit v0.10.2 From 3d94a2a53a3979c30620e3adea10f20bef8267b3 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Tue, 22 Nov 2011 11:03:22 +0900 Subject: ASoC: SAMSUNG: Fix build error This patch adds to fix following build errors. sound/soc/codecs/wm8994.c: In function 'wm8994_readable': sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994' sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant Signed-off-by: Boojin Kim Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c index f75e439..ad9ac42 100644 --- a/sound/soc/samsung/smdk_wm8994.c +++ b/sound/soc/samsung/smdk_wm8994.c @@ -9,6 +9,7 @@ #include "../codecs/wm8994.h" #include +#include /* * Default CFG switch settings to use this driver: -- cgit v0.10.2 From 26cc40a83384178bfaefbcfb4786591498f3e190 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 21 Nov 2011 13:05:02 +0100 Subject: ttm: Don't return the bo reserved on error path An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 617b646..0bb0f5f 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -574,10 +574,16 @@ retry: return ret; spin_lock(&glob->lru_lock); + + if (unlikely(list_empty(&bo->ddestroy))) { + spin_unlock(&glob->lru_lock); + return 0; + } + ret = ttm_bo_reserve_locked(bo, interruptible, no_wait_reserve, false, 0); - if (unlikely(ret != 0) || list_empty(&bo->ddestroy)) { + if (unlikely(ret != 0)) { spin_unlock(&glob->lru_lock); return ret; } -- cgit v0.10.2 From d724502a9d7a46f4a56a1663b1f50d2dc9d1ef40 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:10:14 -0500 Subject: drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher Cc: stable@kernel.org Cc: Jean Delvare Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index fecd705..933a2cd 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -181,6 +181,18 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) gpio = &i2c_info->asGPIO_Info[i]; i2c.valid = false; + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + /* some evergreen boards have bad data for this entry */ if (ASIC_IS_DCE4(rdev)) { if ((i == 7) && -- cgit v0.10.2 From 21240f9bc1b0ac925cd18b74618327a110022332 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Nov 2011 12:41:21 -0500 Subject: drm/radeon/kms/atom: unify i2c gpio table handling Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher Cc: Jean Delvare Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 933a2cd..d24baf3 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -62,6 +62,87 @@ union atom_supported_devices { struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1; }; +static void radeon_lookup_i2c_gpio_quirks(struct radeon_device *rdev, + ATOM_GPIO_I2C_ASSIGMENT *gpio, + u8 index) +{ + /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ + if ((rdev->family == CHIP_R420) || + (rdev->family == CHIP_R423) || + (rdev->family == CHIP_RV410)) { + if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { + gpio->ucClkMaskShift = 0x19; + gpio->ucDataMaskShift = 0x18; + } + } + + /* some evergreen boards have bad data for this entry */ + if (ASIC_IS_DCE4(rdev)) { + if ((index == 7) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && + (gpio->sucI2cId.ucAccess == 0)) { + gpio->sucI2cId.ucAccess = 0x97; + gpio->ucDataMaskShift = 8; + gpio->ucDataEnShift = 8; + gpio->ucDataY_Shift = 8; + gpio->ucDataA_Shift = 8; + } + } + + /* some DCE3 boards have bad data for this entry */ + if (ASIC_IS_DCE3(rdev)) { + if ((index == 4) && + (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && + (gpio->sucI2cId.ucAccess == 0x94)) + gpio->sucI2cId.ucAccess = 0x14; + } +} + +static struct radeon_i2c_bus_rec radeon_get_bus_rec_for_i2c_gpio(ATOM_GPIO_I2C_ASSIGMENT *gpio) +{ + struct radeon_i2c_bus_rec i2c; + + memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); + + i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; + i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; + i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; + i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; + i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; + i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; + i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; + i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; + i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); + i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); + i2c.en_clk_mask = (1 << gpio->ucClkEnShift); + i2c.en_data_mask = (1 << gpio->ucDataEnShift); + i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); + i2c.y_data_mask = (1 << gpio->ucDataY_Shift); + i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); + i2c.a_data_mask = (1 << gpio->ucDataA_Shift); + + if (gpio->sucI2cId.sbfAccess.bfHW_Capable) + i2c.hw_capable = true; + else + i2c.hw_capable = false; + + if (gpio->sucI2cId.ucAccess == 0xa0) + i2c.mm_i2c = true; + else + i2c.mm_i2c = false; + + i2c.i2c_id = gpio->sucI2cId.ucAccess; + + if (i2c.mask_clk_reg) + i2c.valid = true; + else + i2c.valid = false; + + return i2c; +} + static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev, uint8_t id) { @@ -85,71 +166,10 @@ static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rd for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } - - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } - - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); if (gpio->sucI2cId.ucAccess == id) { - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; - - i2c.i2c_id = gpio->sucI2cId.ucAccess; - - if (i2c.mask_clk_reg) - i2c.valid = true; + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); break; } } @@ -169,8 +189,6 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) int i, num_indices; char stmp[32]; - memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec)); - if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) { i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset); @@ -179,72 +197,12 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) for (i = 0; i < num_indices; i++) { gpio = &i2c_info->asGPIO_Info[i]; - i2c.valid = false; - - /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */ - if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { - if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) || - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) { - gpio->ucClkMaskShift = 0x19; - gpio->ucDataMaskShift = 0x18; - } - } - - /* some evergreen boards have bad data for this entry */ - if (ASIC_IS_DCE4(rdev)) { - if ((i == 7) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) && - (gpio->sucI2cId.ucAccess == 0)) { - gpio->sucI2cId.ucAccess = 0x97; - gpio->ucDataMaskShift = 8; - gpio->ucDataEnShift = 8; - gpio->ucDataY_Shift = 8; - gpio->ucDataA_Shift = 8; - } - } - - /* some DCE3 boards have bad data for this entry */ - if (ASIC_IS_DCE3(rdev)) { - if ((i == 4) && - (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) && - (gpio->sucI2cId.ucAccess == 0x94)) - gpio->sucI2cId.ucAccess = 0x14; - } - i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; - i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; - i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; - i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4; - i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4; - i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4; - i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4; - i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4; - i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift); - i2c.mask_data_mask = (1 << gpio->ucDataMaskShift); - i2c.en_clk_mask = (1 << gpio->ucClkEnShift); - i2c.en_data_mask = (1 << gpio->ucDataEnShift); - i2c.y_clk_mask = (1 << gpio->ucClkY_Shift); - i2c.y_data_mask = (1 << gpio->ucDataY_Shift); - i2c.a_clk_mask = (1 << gpio->ucClkA_Shift); - i2c.a_data_mask = (1 << gpio->ucDataA_Shift); - - if (gpio->sucI2cId.sbfAccess.bfHW_Capable) - i2c.hw_capable = true; - else - i2c.hw_capable = false; - - if (gpio->sucI2cId.ucAccess == 0xa0) - i2c.mm_i2c = true; - else - i2c.mm_i2c = false; + radeon_lookup_i2c_gpio_quirks(rdev, gpio, i); - i2c.i2c_id = gpio->sucI2cId.ucAccess; + i2c = radeon_get_bus_rec_for_i2c_gpio(gpio); - if (i2c.mask_clk_reg) { - i2c.valid = true; + if (i2c.valid) { sprintf(stmp, "0x%x", i2c.i2c_id); rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp); } -- cgit v0.10.2 From c916874d60d9daf2e2d5f4f622b185ef57deb6a4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 15 Nov 2011 14:53:11 -0800 Subject: drivers/gpu/vga/vgaarb.c: add missing kfree kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall Cc: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index bdde899..111d956 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -991,14 +991,20 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, uc = &priv->cards[i]; } - if (!uc) - return -EINVAL; + if (!uc) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) { + ret_val = -EINVAL; + goto done; + } - if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) - return -EINVAL; + if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) { + ret_val = -EINVAL; + goto done; + } vga_put(pdev, io_state); -- cgit v0.10.2 From 717b6d83664646963c71d014c71babaa802333b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Tue, 22 Nov 2011 16:03:10 -0500 Subject: net-netlink: fix diag to export IPv4 tos for dual-stack IPv6 sockets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 68e8ac5..ccee270 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -108,9 +108,6 @@ static int inet_csk_diag_fill(struct sock *sk, icsk->icsk_ca_ops->name); } - if ((ext & (1 << (INET_DIAG_TOS - 1))) && (sk->sk_family != AF_INET6)) - RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos); - r->idiag_family = sk->sk_family; r->idiag_state = sk->sk_state; r->idiag_timer = 0; @@ -125,16 +122,23 @@ static int inet_csk_diag_fill(struct sock *sk, r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; + /* IPv6 dual-stack sockets use inet->tos for IPv4 connections, + * hence this needs to be included regardless of socket family. + */ + if (ext & (1 << (INET_DIAG_TOS - 1))) + RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos); + #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) if (r->idiag_family == AF_INET6) { const struct ipv6_pinfo *np = inet6_sk(sk); + if (ext & (1 << (INET_DIAG_TCLASS - 1))) + RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass); + ipv6_addr_copy((struct in6_addr *)r->id.idiag_src, &np->rcv_saddr); ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst, &np->daddr); - if (ext & (1 << (INET_DIAG_TCLASS - 1))) - RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass); } #endif -- cgit v0.10.2 From 20e994a05b33b186a22a3b9e922df4cce644daac Mon Sep 17 00:00:00 2001 From: Feng King Date: Mon, 21 Nov 2011 01:47:11 +0000 Subject: net: correct comments of skb_shift when skb_shift, we want to shift paged data from skb to tgt frag area. Original comments revert the shift order Signed-off-by: Feng King Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 18a3ceb..3c30ee4 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2230,7 +2230,7 @@ static int skb_prepare_for_shift(struct sk_buff *skb) * @shiftlen: shift up to this many bytes * * Attempts to shift up to shiftlen worth of bytes, which may be less than - * the length of the skb, from tgt to skb. Returns number bytes shifted. + * the length of the skb, from skb to tgt. Returns number bytes shifted. * It's up to caller to free skb if everything was shifted. * * If @tgt runs out of frags, the whole operation is aborted. -- cgit v0.10.2 From 6cccccafe9e8b88adb1800940ded6ad76c587e1b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 22 Nov 2011 16:36:35 -0500 Subject: Revert "rt2x00: handle spurious pci interrupts" This reverts commit 23085d5796561625db4143a671f1de081f66ef08. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 676c765..3a6b402 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1380,7 +1380,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d0b627c..dcc0e1f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1512,7 +1512,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 9d83e70f..bf55b4a 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2337,7 +2337,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg && !reg_mcu) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; -- cgit v0.10.2 From 5eccdf5e06eb67779716ae26142402a1ae9b012c Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 21 Nov 2011 06:53:46 +0000 Subject: tc: comment spelling fixes Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index c533670..7281d5a 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -30,7 +30,7 @@ */ struct tc_stats { - __u64 bytes; /* NUmber of enqueues bytes */ + __u64 bytes; /* Number of enqueued bytes */ __u32 packets; /* Number of enqueued packets */ __u32 drops; /* Packets dropped because of lack of resources */ __u32 overlimits; /* Number of throttle events when this @@ -297,7 +297,7 @@ struct tc_htb_glob { __u32 debug; /* debug flags */ /* stats */ - __u32 direct_pkts; /* count of non shapped packets */ + __u32 direct_pkts; /* count of non shaped packets */ }; enum { TCA_HTB_UNSPEC, @@ -503,7 +503,7 @@ enum { }; #define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) -/* State transition probablities for 4 state model */ +/* State transition probabilities for 4 state model */ struct tc_netem_gimodel { __u32 p13; __u32 p31; -- cgit v0.10.2 From 82e5fc2a34fa9ffea38f00c4066b7e600a0ca5e6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 22 Nov 2011 16:38:19 -0500 Subject: Revert "rt2800pci: handle spurious interrupts" This reverts commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 4dc2d0f..da48c8a 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -880,13 +880,8 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - /* - * Some devices can generate interrupts with empty CSR register, we - * "handle" such irq's to prevent interrupt controller treat them as - * spurious interrupts and disable irq line. - */ if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; -- cgit v0.10.2 From 24ca9a847791fd53d9b217330b15f3c285827a18 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Nov 2011 14:44:28 +0200 Subject: SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared By returning '0' instead of 'EAGAIN' when the tests in xs_nospace() fail to find evidence of socket congestion, we are making the RPC engine believe that the message was incorrectly sent and so it disconnects the socket instead of just retrying. The bug appears to have been introduced by commit 5e3771ce2d6a69e10fcc870cdf226d121d868491 (SUNRPC: Ensure that xs_nospace return values are propagated). Reported-by: Andrew Cooper Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>= 2.6.30] Tested-by: Andrew Cooper diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 2d78d95..55472c4 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -496,7 +496,7 @@ static int xs_nospace(struct rpc_task *task) struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); - int ret = 0; + int ret = -EAGAIN; dprintk("RPC: %5u xmit incomplete (%u left of %u)\n", task->tk_pid, req->rq_slen - req->rq_bytes_sent, @@ -508,7 +508,6 @@ static int xs_nospace(struct rpc_task *task) /* Don't race with disconnect */ if (xprt_connected(xprt)) { if (test_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags)) { - ret = -EAGAIN; /* * Notify TCP that we're limited by the application * window size -- cgit v0.10.2 From d66b8537b30fbaf79e0f467fa6b7e1a2191cba83 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 22 Nov 2011 17:17:23 +0100 Subject: ASoC: cs4720: use snd_soc_cache_sync() Replace the manual register restore mechanism in cs4270.c and call the generic snd_soc_cache_sync() handler instead. This factors code out in favour of core facilities and also fixes a bus confusion that is most probably caused by intermixing i2c-regmap functions and i2c_smbus_* accessors. Signed-off-by: Daniel Mack Reported-and-tested-by: Sven Neumann Acked-by: Timur Tabi Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f1f237e..73f46eb 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -601,7 +601,6 @@ static int cs4270_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg) static int cs4270_soc_resume(struct snd_soc_codec *codec) { struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c_client = to_i2c_client(codec->dev); int reg; regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), @@ -612,14 +611,7 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec) ndelay(500); /* first restore the entire register cache ... */ - for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) { - u8 val = snd_soc_read(codec, reg); - - if (i2c_smbus_write_byte_data(i2c_client, reg, val)) { - dev_err(codec->dev, "i2c write failed\n"); - return -EIO; - } - } + snd_soc_cache_sync(codec); /* ... then disable the power-down bits */ reg = snd_soc_read(codec, CS4270_PWRCTL); -- cgit v0.10.2 From 380c88303812951f6c838241366a66a03fb5c897 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 22 Nov 2011 14:38:59 -0600 Subject: ASoC: mpc8610: tell the CS4270 codec that it's the master Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is detected") requires the machine driver to tell the CS4270 codec driver whether the CS4270 should be configured for master or slave operation. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 31af405..ae49f1c 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -392,7 +392,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } if (strcasecmp(sprop, "i2s-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; @@ -409,31 +410,38 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } machine_data->clk_frequency = be32_to_cpup(iprop); } else if (strcasecmp(sprop, "i2s-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "lj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "lj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "rj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "rj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "ac97-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "ac97-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else { -- cgit v0.10.2 From b4bbb02934e4511d9083f15c23e90703482e84ad Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 22 Nov 2011 15:09:20 -0800 Subject: Revert "of/irq: of_irq_find_parent: check for parent equal to child" This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt Acked-by: Grant Likely Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev Cc: Tanmay Inamdar Signed-off-by: Linus Torvalds diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 6d3dd39..791270b 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -60,27 +60,27 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); */ struct device_node *of_irq_find_parent(struct device_node *child) { - struct device_node *p, *c = child; + struct device_node *p; const __be32 *parp; - if (!of_node_get(c)) + if (!of_node_get(child)) return NULL; do { - parp = of_get_property(c, "interrupt-parent", NULL); + parp = of_get_property(child, "interrupt-parent", NULL); if (parp == NULL) - p = of_get_parent(c); + p = of_get_parent(child); else { if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) p = of_node_get(of_irq_dflt_pic); else p = of_find_node_by_phandle(be32_to_cpup(parp)); } - of_node_put(c); - c = p; + of_node_put(child); + child = p; } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); - return (p == child) ? NULL : p; + return p; } /** -- cgit v0.10.2 From 7c8f4247986bb5c5fb1d5b1fad35461989fe8310 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 23 Nov 2011 10:18:52 +1100 Subject: md/lock: ensure updates to page_attrs are properly locked. Page attributes are set using __set_bit rather than set_bit as it normally called under a spinlock so the extra atomicity is not needed. However there are two places where we might set or clear page attributes without holding the spinlock. So add the spinlock in those cases. This might be the cause of occasional reports that bits a aren't getting clear properly - theory is that BITMAP_PAGE_PENDING gets lost when BITMAP_PAGE_NEEDWRITE is set or cleared. This is an inconvenience, not a threat to data safety. Signed-off-by: NeilBrown diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7878712..b690711 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1106,10 +1106,12 @@ void bitmap_write_all(struct bitmap *bitmap) */ int i; + spin_lock_irq(&bitmap->lock); for (i = 0; i < bitmap->file_pages; i++) set_page_attr(bitmap, bitmap->filemap[i], BITMAP_PAGE_NEEDWRITE); bitmap->allclean = 0; + spin_unlock_irq(&bitmap->lock); } static void bitmap_count_page(struct bitmap *bitmap, sector_t offset, int inc) @@ -1605,7 +1607,9 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) for (chunk = s; chunk <= e; chunk++) { sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap); bitmap_set_memory_bits(bitmap, sec, 1); + spin_lock_irq(&bitmap->lock); bitmap_file_set_bit(bitmap, sec); + spin_unlock_irq(&bitmap->lock); if (sec < bitmap->mddev->recovery_cp) /* We are asserting that the array is dirty, * so move the recovery_cp address back so -- cgit v0.10.2 From c0afabd3d553c521e003779c127143ffde55a16f Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 22 Nov 2011 11:03:14 +0100 Subject: rtc: Disable the alarm in the hardware Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: stable@kernel.org Cc: John Stultz Signed-off-by: Rabin Vincent Signed-off-by: John Stultz diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 3195dbd..e3cf2f5 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -318,6 +318,20 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_read_alarm); +static int ___rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +{ + int err; + + if (!rtc->ops) + err = -ENODEV; + else if (!rtc->ops->set_alarm) + err = -EINVAL; + else + err = rtc->ops->set_alarm(rtc->dev.parent, alarm); + + return err; +} + static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { struct rtc_time tm; @@ -341,14 +355,7 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) * over right here, before we set the alarm. */ - if (!rtc->ops) - err = -ENODEV; - else if (!rtc->ops->set_alarm) - err = -EINVAL; - else - err = rtc->ops->set_alarm(rtc->dev.parent, alarm); - - return err; + return ___rtc_set_alarm(rtc, alarm); } int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) @@ -762,6 +769,20 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) return 0; } +static void rtc_alarm_disable(struct rtc_device *rtc) +{ + struct rtc_wkalrm alarm; + struct rtc_time tm; + + __rtc_read_time(rtc, &tm); + + alarm.time = rtc_ktime_to_tm(ktime_add(rtc_tm_to_ktime(tm), + ktime_set(300, 0))); + alarm.enabled = 0; + + ___rtc_set_alarm(rtc, &alarm); +} + /** * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue * @rtc rtc device @@ -783,8 +804,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) struct rtc_wkalrm alarm; int err; next = timerqueue_getnext(&rtc->timerqueue); - if (!next) + if (!next) { + rtc_alarm_disable(rtc); return; + } alarm.time = rtc_ktime_to_tm(next->expires); alarm.enabled = 1; err = __rtc_set_alarm(rtc, &alarm); @@ -846,7 +869,8 @@ again: err = __rtc_set_alarm(rtc, &alarm); if (err == -ETIME) goto again; - } + } else + rtc_alarm_disable(rtc); mutex_unlock(&rtc->ops_lock); } -- cgit v0.10.2 From 6a8943d9ec2567572fca25cf69ad45844d0141a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Tue, 22 Nov 2011 18:24:51 -0800 Subject: rtc: Fix some bugs that allowed accumulating time drift in suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current code checks if abs(delta_delta.tv_sec) is greater or equal to two before it discards the old delta value, but this can trigger at close to -1 seconds since -1.000000001 seconds is stored as tv_sec -2 and tv_nsec 999999999 in a normalized timespec. rtc_resume had an early return check if the rtc value had not changed since rtc_suspend. This effectivly stops time for the duration of the short sleep. Check if sleep_time is positive after all the adjustments have been applied instead since this allows the old_system adjustment in rtc_suspend to have an effect even for short sleep cycles. CC: stable@kernel.org Signed-off-by: Arve Hjønnevåg Signed-off-by: John Stultz diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 01a7df53..b82a155 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -66,7 +66,7 @@ static int rtc_suspend(struct device *dev, pm_message_t mesg) */ delta = timespec_sub(old_system, old_rtc); delta_delta = timespec_sub(delta, old_delta); - if (abs(delta_delta.tv_sec) >= 2) { + if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) { /* * if delta_delta is too large, assume time correction * has occured and set old_delta to the current delta. @@ -100,9 +100,8 @@ static int rtc_resume(struct device *dev) rtc_tm_to_time(&tm, &new_rtc.tv_sec); new_rtc.tv_nsec = 0; - if (new_rtc.tv_sec <= old_rtc.tv_sec) { - if (new_rtc.tv_sec < old_rtc.tv_sec) - pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); + if (new_rtc.tv_sec < old_rtc.tv_sec) { + pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); return 0; } @@ -119,7 +118,8 @@ static int rtc_resume(struct device *dev) sleep_time = timespec_sub(sleep_time, timespec_sub(new_system, old_system)); - timekeeping_inject_sleeptime(&sleep_time); + if (sleep_time.tv_sec >= 0) + timekeeping_inject_sleeptime(&sleep_time); return 0; } -- cgit v0.10.2 From e2301a4de22c438f5a962c7cefc3e9cba736991c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Nov 2011 19:58:56 +0100 Subject: ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config() In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds Tested-by: Dirk Hohndel Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e44b107..4562e9d 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4046,9 +4046,9 @@ int snd_hda_check_board_codec_sid_config(struct hda_codec *codec, /* Search for codec ID */ for (q = tbl; q->subvendor; q++) { - unsigned long vendorid = (q->subdevice) | (q->subvendor << 16); - - if (vendorid == codec->subsystem_id) + unsigned int mask = 0xffff0000 | q->subdevice_mask; + unsigned int id = (q->subdevice | (q->subvendor << 16)) & mask; + if ((codec->subsystem_id & mask) == id) break; } -- cgit v0.10.2 From 6dfeb703e386369d9f1585d29482efe7b2b4401d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Nov 2011 20:00:31 +0100 Subject: ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds Tested-by: Dirk Hohndel Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 2fbab8e..7bd2a52 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -58,6 +58,8 @@ struct cs_spec { unsigned int gpio_mask; unsigned int gpio_dir; unsigned int gpio_data; + unsigned int gpio_eapd_hp; /* EAPD GPIO bit for headphones */ + unsigned int gpio_eapd_speaker; /* EAPD GPIO bit for speakers */ struct hda_pcm pcm_rec[2]; /* PCM information */ @@ -76,6 +78,7 @@ enum { CS420X_MBP53, CS420X_MBP55, CS420X_IMAC27, + CS420X_APPLE, CS420X_AUTO, CS420X_MODELS }; @@ -928,10 +931,9 @@ static void cs_automute(struct hda_codec *codec) spdif_present ? 0 : PIN_OUT); } } - if (spec->board_config == CS420X_MBP53 || - spec->board_config == CS420X_MBP55 || - spec->board_config == CS420X_IMAC27) { - unsigned int gpio = hp_present ? 0x02 : 0x08; + if (spec->gpio_eapd_hp) { + unsigned int gpio = hp_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, gpio); } @@ -1276,6 +1278,7 @@ static const char * const cs420x_models[CS420X_MODELS] = { [CS420X_MBP53] = "mbp53", [CS420X_MBP55] = "mbp55", [CS420X_IMAC27] = "imac27", + [CS420X_IMAC27] = "apple", [CS420X_AUTO] = "auto", }; @@ -1285,7 +1288,13 @@ static const struct snd_pci_quirk cs420x_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0x0d94, "MacBookAir 3,1(2)", CS420X_MBP55), SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), SND_PCI_QUIRK(0x10de, 0xcb89, "MacBookPro 7,1", CS420X_MBP55), - SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), + /* this conflicts with too many other models */ + /*SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27),*/ + {} /* terminator */ +}; + +static const struct snd_pci_quirk cs420x_codec_cfg_tbl[] = { + SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE), {} /* terminator */ }; @@ -1367,6 +1376,10 @@ static int patch_cs420x(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, CS420X_MODELS, cs420x_models, cs420x_cfg_tbl); + if (spec->board_config < 0) + spec->board_config = + snd_hda_check_board_codec_sid_config(codec, + CS420X_MODELS, NULL, cs420x_codec_cfg_tbl); if (spec->board_config >= 0) fix_pincfg(codec, spec->board_config, cs_pincfgs); @@ -1374,10 +1387,11 @@ static int patch_cs420x(struct hda_codec *codec) case CS420X_IMAC27: case CS420X_MBP53: case CS420X_MBP55: - /* GPIO1 = headphones */ - /* GPIO3 = speakers */ - spec->gpio_mask = 0x0a; - spec->gpio_dir = 0x0a; + case CS420X_APPLE: + spec->gpio_eapd_hp = 2; /* GPIO1 = headphones */ + spec->gpio_eapd_speaker = 8; /* GPIO3 = speakers */ + spec->gpio_mask = spec->gpio_dir = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker; break; } -- cgit v0.10.2 From 6759dc323826c2c806c998cd93945c5476688dd2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Nov 2011 07:38:59 +0100 Subject: ALSA: hda/realtek - Fix missing inits of item indices for auto-mic When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko Cc: [v3.1] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 336d14e..06c0c12 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1054,8 +1054,20 @@ static bool alc_rebuild_imux_for_auto_mic(struct hda_codec *codec) spec->imux_pins[2] = spec->dock_mic_pin; for (i = 0; i < 3; i++) { strcpy(imux->items[i].label, texts[i]); - if (spec->imux_pins[i]) + if (spec->imux_pins[i]) { + hda_nid_t pin = spec->imux_pins[i]; + int c; + for (c = 0; c < spec->num_adc_nids; c++) { + hda_nid_t cap = spec->capsrc_nids ? + spec->capsrc_nids[c] : spec->adc_nids[c]; + int idx = get_connection_index(codec, cap, pin); + if (idx >= 0) { + imux->items[i].index = idx; + break; + } + } imux->num_items = i + 1; + } } spec->num_mux_defs = 1; spec->input_mux = imux; -- cgit v0.10.2 From 61071594f64ed12328046f94716d1d744bddc0a1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Nov 2011 07:52:15 +0100 Subject: ALSA: hda/realtek - Minor cleanup Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 06c0c12..cbde019 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -277,6 +277,12 @@ static bool alc_dyn_adc_pcm_resetup(struct hda_codec *codec, int cur) return false; } +static inline hda_nid_t get_capsrc(struct alc_spec *spec, int idx) +{ + return spec->capsrc_nids ? + spec->capsrc_nids[idx] : spec->adc_nids[idx]; +} + /* select the given imux item; either unmute exclusively or select the route */ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, unsigned int idx, bool force) @@ -303,8 +309,7 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, adc_idx = spec->dyn_adc_idx[idx]; } - nid = spec->capsrc_nids ? - spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx]; + nid = get_capsrc(spec, adc_idx); /* no selection? */ num_conns = snd_hda_get_conn_list(codec, nid, NULL); @@ -1058,8 +1063,7 @@ static bool alc_rebuild_imux_for_auto_mic(struct hda_codec *codec) hda_nid_t pin = spec->imux_pins[i]; int c; for (c = 0; c < spec->num_adc_nids; c++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[c] : spec->adc_nids[c]; + hda_nid_t cap = get_capsrc(spec, c); int idx = get_connection_index(codec, cap, pin); if (idx >= 0) { imux->items[i].index = idx; @@ -1969,10 +1973,8 @@ static int alc_build_controls(struct hda_codec *codec) if (!kctl) kctl = snd_hda_find_mixer_ctl(codec, "Input Source"); for (i = 0; kctl && i < kctl->count; i++) { - const hda_nid_t *nids = spec->capsrc_nids; - if (!nids) - nids = spec->adc_nids; - err = snd_hda_add_nid(codec, kctl, i, nids[i]); + err = snd_hda_add_nid(codec, kctl, i, + get_capsrc(spec, i)); if (err < 0) return err; } @@ -2759,8 +2761,7 @@ static int alc_auto_create_input_ctls(struct hda_codec *codec) } for (c = 0; c < num_adcs; c++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[c] : spec->adc_nids[c]; + hda_nid_t cap = get_capsrc(spec, c); idx = get_connection_index(codec, cap, pin); if (idx >= 0) { spec->imux_pins[imux->num_items] = pin; @@ -3706,8 +3707,7 @@ static int init_capsrc_for_pin(struct hda_codec *codec, hda_nid_t pin) if (!pin) return 0; for (i = 0; i < spec->num_adc_nids; i++) { - hda_nid_t cap = spec->capsrc_nids ? - spec->capsrc_nids[i] : spec->adc_nids[i]; + hda_nid_t cap = get_capsrc(spec, i); int idx; idx = get_connection_index(codec, cap, pin); -- cgit v0.10.2 From 4d65a2465f6f2694de67777a8aedb1272f473979 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Wed, 23 Nov 2011 03:51:54 -0500 Subject: ipv6: fix a bug in ndisc_send_redirect Release skb when transmit rate limit _not_ allow Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 44e5b7f..0cb78d7 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1571,7 +1571,7 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh, } if (!rt->rt6i_peer) rt6_bind_peer(rt, 1); - if (inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ)) + if (!inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ)) goto release; if (dev->addr_len) { -- cgit v0.10.2 From a5cd335165e31db9dbab636fd29895d41da55dd2 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Wed, 23 Nov 2011 01:12:01 -0500 Subject: drm: integer overflow in drm_mode_dirtyfb_ioctl() There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen Signed-off-by: Xi Wang Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 405c63b..8323fc3 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1873,6 +1873,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, } if (num_clips && clips_ptr) { + if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) { + ret = -EINVAL; + goto out_err1; + } clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); if (!clips) { ret = -ENOMEM; diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index d30bedf..ddd46db 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -235,6 +235,8 @@ struct drm_mode_fb_cmd { #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02 #define DRM_MODE_FB_DIRTY_FLAGS 0x03 +#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256 + /* * Mark a region of a framebuffer as dirty. * -- cgit v0.10.2 From 5151412dd4338b273afdb107c3772528e9e67d92 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 23 Nov 2011 10:59:13 +0100 Subject: block: initialize request_queue's numa node during struct request_queue is allocated with __GFP_ZERO so its "node" field is zero before initialization. This causes an oops if node 0 is offline in the page allocator because its zonelists are not initialized. From Dave Young's dmesg: SRAT: Node 1 PXM 2 0-d0000000 SRAT: Node 1 PXM 2 100000000-330000000 SRAT: Node 0 PXM 1 330000000-630000000 Initmem setup node 1 0000000000000000-000000000affb000 ... Built 1 zonelists in Node order, mobility grouping on. ... BUG: unable to handle kernel paging request at 0000000000001c08 IP: [] __alloc_pages_nodemask+0xb5/0x870 and __alloc_pages_nodemask+0xb5 translates to a NULL pointer on zonelist->_zonerefs. The fix is to initialize q->node at the time of allocation so the correct node is passed to the slab allocator later. Since blk_init_allocated_queue_node() is no longer needed, merge it with blk_init_allocated_queue(). [rientjes@google.com: changelog, initializing q->node] Cc: stable@vger.kernel.org [2.6.37+] Reported-by: Dave Young Signed-off-by: Mike Snitzer Signed-off-by: David Rientjes Tested-by: Dave Young Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index ea70e6c..20d69f6 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -467,6 +467,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) q->backing_dev_info.state = 0; q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY; q->backing_dev_info.name = "block"; + q->node = node_id; err = bdi_init(&q->backing_dev_info); if (err) { @@ -551,7 +552,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) if (!uninit_q) return NULL; - q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id); + q = blk_init_allocated_queue(uninit_q, rfn, lock); if (!q) blk_cleanup_queue(uninit_q); @@ -563,18 +564,9 @@ struct request_queue * blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn, spinlock_t *lock) { - return blk_init_allocated_queue_node(q, rfn, lock, -1); -} -EXPORT_SYMBOL(blk_init_allocated_queue); - -struct request_queue * -blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn, - spinlock_t *lock, int node_id) -{ if (!q) return NULL; - q->node = node_id; if (blk_init_free_list(q)) return NULL; @@ -604,7 +596,7 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn, return NULL; } -EXPORT_SYMBOL(blk_init_allocated_queue_node); +EXPORT_SYMBOL(blk_init_allocated_queue); int blk_get_queue(struct request_queue *q) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c7a6d3b..94acd81 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -805,9 +805,6 @@ extern void blk_unprep_request(struct request *); */ extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id); -extern struct request_queue *blk_init_allocated_queue_node(struct request_queue *, - request_fn_proc *, - spinlock_t *, int node_id); extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *); extern struct request_queue *blk_init_allocated_queue(struct request_queue *, request_fn_proc *, spinlock_t *); -- cgit v0.10.2 From 4ca8af579c9748376db537575f7a811c179fe50a Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 23 Nov 2011 10:39:10 +0100 Subject: ASoC: drop support for PlayPaq with WM8510 SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca9683b ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle Signed-off-by: Mark Brown diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index bee3c94..d1fcc81 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -1,6 +1,6 @@ config SND_ATMEL_SOC tristate "SoC Audio for the Atmel System-on-Chip" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 help Say Y or M if you want to add support for codecs attached to the ATMEL SSC interface. You will also need @@ -24,25 +24,6 @@ config SND_AT91_SOC_SAM9G20_WM8731 Say Y if you want to add support for SoC audio on WM8731-based AT91sam9g20 evaluation board. -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS - select SND_ATMEL_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. - config SND_AT91_SOC_AFEB9260 tristate "SoC Audio support for AFEB9260 board" depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index e7ea56b..a5c0bf1 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -8,9 +8,5 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o # AT91 Machine Support snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c deleted file mode 100644 index 73ae99a..0000000 --- a/sound/soc/atmel/playpaq_wm8510.c +++ /dev/null @@ -1,473 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include "../codecs/wm8510.h" -#include "atmel-pcm.h" -#include "atmel_ssc_dai.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_8; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_12; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const struct snd_soc_dapm_route intercon[] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon)); - - - - /* always connected pins */ - snd_soc_dapm_enable_pin(dapm, "Int Mic"); - snd_soc_dapm_enable_pin(dapm, "Ext Spk"); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai_name= "atmel-ssc-dai.0", - .platform_name = "atmel-pcm-audio", - .codec_name = "wm8510-codec.0-0x1a", - .codec_dai_name = "wm8510-hifi", - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_card snd_soc_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - ret = PTR_ERR(_gclk0); - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - ret = PTR_ERR(_pll0); - goto err_pll0; - } - ret = clk_set_parent(_gclk0, _pll0); - if (ret) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq); - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum "); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From cc6bcf7d2ec2234e7b41770185e4dc826390185e Mon Sep 17 00:00:00 2001 From: "Jeffrey (Sheng-Hui) Chu" Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c-algo-bit: Generate correct i2c address sequence for 10-bit target The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu Cc: stable@kernel.org Signed-off-by: Jean Delvare diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 85584a5..525c734 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -488,7 +488,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if (flags & I2C_M_TEN) { /* a ten bit address */ - addr = 0xf0 | ((msg->addr >> 7) & 0x03); + addr = 0xf0 | ((msg->addr >> 7) & 0x06); bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr); /* try extended address code...*/ ret = try_address(i2c_adap, addr, retries); @@ -498,7 +498,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return -ENXIO; } /* the remaining 8 bit address */ - ret = i2c_outb(i2c_adap, msg->addr & 0x7f); + ret = i2c_outb(i2c_adap, msg->addr & 0xff); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ dev_err(&i2c_adap->dev, "died at 2nd address code\n"); -- cgit v0.10.2 From cbb44514048a250647c6c6b3df27ff62cb71f7d5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Fix device name for 10-bit slave address 10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses index e989070..cdfe139 100644 --- a/Documentation/i2c/ten-bit-addresses +++ b/Documentation/i2c/ten-bit-addresses @@ -1,22 +1,24 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit addresses, and an extended set of 10 bit addresses. The sets of addresses do not intersect: the 7 bit address 0x10 is not the same as the 10 bit -address 0x10 (though a single device could respond to both of them). You -select a 10 bit address by adding an extra byte after the address -byte: - S Addr7 Rd/Wr .... -becomes - S 11110 Addr10 Rd/Wr -S is the start bit, Rd/Wr the read/write bit, and if you count the number -of bits, you will see the there are 8 after the S bit for 7 bit addresses, -and 16 after the S bit for 10 bit addresses. +address 0x10 (though a single device could respond to both of them). -WARNING! The current 10 bit address support is EXPERIMENTAL. There are -several places in the code that will cause SEVERE PROBLEMS with 10 bit -addresses, even though there is some basic handling and hooks. Also, -almost no supported adapter handles the 10 bit addresses correctly. +I2C messages to and from 10-bit address devices have a different format. +See the I2C specification for the details. -As soon as a real 10 bit address device is spotted 'in the wild', we -can and will add proper support. Right now, 10 bit address devices -are defined by the I2C protocol, but we have never seen a single device -which supports them. +The current 10 bit address support is minimal. It should work, however +you can expect some problems along the way: +* Not all bus drivers support 10-bit addresses. Some don't because the + hardware doesn't support them (SMBus doesn't require 10-bit address + support for example), some don't because nobody bothered adding the + code (or it's there but not working properly.) Software implementation + (i2c-algo-bit) is known to work. +* Some optional features do not support 10-bit addresses. This is the + case of automatic detection and instantiation of devices by their, + drivers, for example. +* Many user-space packages (for example i2c-tools) lack support for + 10-bit addresses. + +Note that 10-bit address devices are still pretty rare, so the limitations +listed above could stay for a long time, maybe even forever if nobody +needs them to be fixed. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 131079a..1e56061 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -539,8 +539,10 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.type = &i2c_client_type; client->dev.of_node = info->of_node; + /* For 10-bit clients, add an arbitrary offset to avoid collisions */ dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), - client->addr); + client->addr | ((client->flags & I2C_CLIENT_TEN) + ? 0xa000 : 0)); status = device_register(&client->dev); if (status) goto out_err; -- cgit v0.10.2 From 67820021dc9c8da37f773025190280f55f3626d4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Delete ANY_I2C_BUS Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago, so ANY_I2C_BUS can go away as well. Signed-off-by: Jean Delvare diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a81bf6d..07d103a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *); /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -/* The numbers to use to set I2C bus address */ -#define ANY_I2C_BUS 0xffff - /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ #define I2C_ADDRS(addr, addrs...) \ ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) -- cgit v0.10.2 From eff245c82f115059648cdce95dd68bb940f2b006 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 23 Nov 2011 11:33:07 +0100 Subject: i2c: Make i2cdev_notifier_call static The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D Signed-off-by: Jean Delvare diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index c90ce50..57a45ce8 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -579,7 +579,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy) return 0; } -int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, +static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; -- cgit v0.10.2 From b284362b6b45150d171ff5bed92bc416b040aead Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 23 Nov 2011 12:46:11 +0800 Subject: ASoC: cs42l51: Fix off-by-one for reg_cache_size Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index 8c3c820..1ee66361 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -555,7 +555,7 @@ static int cs42l51_probe(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_device_cs42l51 = { .probe = cs42l51_probe, - .reg_cache_size = CS42L51_NUMREGS, + .reg_cache_size = CS42L51_NUMREGS + 1, .reg_word_size = sizeof(u8), }; -- cgit v0.10.2 From b1807719f6acdf18cc4bde3b5400d05d77801494 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 16 Nov 2011 11:39:52 +0100 Subject: HID: Correct General touch PID Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 848a56c..af35384 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1771,8 +1771,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 06ce996..4a441a6 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -266,7 +266,7 @@ #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc -#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001 +#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003 #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 -- cgit v0.10.2 From 780dc9ba4eb682a89be48d5b814feae6722a19e0 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 8 Nov 2011 18:54:10 +0530 Subject: regulator: TPS65910: Fix VDD1/2 voltage selector count Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed Signed-off-by: Mark Brown diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 66d2d60..b552aae 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -664,10 +664,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD1, (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), @@ -675,10 +675,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); break; case TPS65910_REG_VDD2: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD2, (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), @@ -756,9 +756,9 @@ static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: case TPS65910_REG_VDD2: - mult = (selector / VDD1_2_NUM_VOLTS) + 1; + mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; volt = VDD1_2_MIN_VOLT + - (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + (selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET; break; case TPS65911_REG_VDDCTRL: volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET); @@ -947,6 +947,8 @@ static __devinit int tps65910_probe(struct platform_device *pdev) if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) { pmic->desc[i].ops = &tps65910_ops_dcdc; + pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE * + VDD1_2_NUM_VOLT_COARSE; } else if (i == TPS65910_REG_VDD3) { if (tps65910_chip_id(tps65910) == TPS65910) pmic->desc[i].ops = &tps65910_ops_vdd3; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 82b4c88..8bf2cb9 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -243,7 +243,8 @@ /*Registers VDD1, VDD2 voltage values definitions */ -#define VDD1_2_NUM_VOLTS 73 +#define VDD1_2_NUM_VOLT_FINE 73 +#define VDD1_2_NUM_VOLT_COARSE 3 #define VDD1_2_MIN_VOLT 6000 #define VDD1_2_OFFSET 125 -- cgit v0.10.2 From 5ff1ddf22b2584d00d7e0ba5a8eab07b5338bd84 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 23 Nov 2011 22:37:00 +0800 Subject: ASoC: skip resume of soc-audio devices without codecs There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao Signed-off-by: Mark Brown diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a5d3685..a25fa63 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -709,6 +709,12 @@ int snd_soc_resume(struct device *dev) struct snd_soc_card *card = dev_get_drvdata(dev); int i, ac97_control = 0; + /* If the initialization of this soc device failed, there is no codec + * associated with it. Just bail out in this case. + */ + if (list_empty(&card->codec_dev_list)) + return 0; + /* AC97 devices might have other drivers hanging off them so * need to resume immediately. Other drivers don't have that * problem and may take a substantial amount of time to resume -- cgit v0.10.2 From 67589c71456b0346500629967292dea3802230b6 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 23 Nov 2011 08:20:53 -0800 Subject: percpu: explain why per_cpu_ptr_to_phys() is more complicated than necessary Add comments about current per_cpu_ptr_to_phys implementation to explain why the logic is more complicated than necessary. -tj: relocated comment into kerneldoc comment Signed-off-by: Dave Young Signed-off-by: Tejun Heo diff --git a/mm/percpu.c b/mm/percpu.c index 2473ff0..3bb810a 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -978,6 +978,17 @@ bool is_kernel_percpu_address(unsigned long addr) * address. The caller is responsible for ensuring @addr stays valid * until this function finishes. * + * percpu allocator has special setup for the first chunk, which currently + * supports either embedding in linear address space or vmalloc mapping, + * and, from the second one, the backing allocator (currently either vm or + * km) provides translation. + * + * The addr can be tranlated simply without checking if it falls into the + * first chunk. But the current code reflects better how percpu allocator + * actually works, and the verification can discover both bugs in percpu + * allocator itself and per_cpu_ptr_to_phys() callers. So we keep current + * code. + * * RETURNS: * The physical address for @addr. */ -- cgit v0.10.2 From c2735391fbc68feae10d6d14e60956c8106e725f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 10 Sep 2011 12:26:07 +0200 Subject: arm: mx28: fix bit operation in clock setting reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by: Wolfram Sang Cc: Sascha Hauer Cc: Shawn Guo Signed-off-by: Shawn Guo Cc: stable@kernel.org Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 229ae34..da6e4aa 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v0.10.2 From bb58dd5d1ffad6c2d21c69698ba766dad4ae54e6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 22 Nov 2011 23:08:10 +0100 Subject: PM / Hibernate: Do not leak memory in error/test code paths The hibernation core code forgets to release memory preallocated for hibernation if there's an error in its early stages or if test modes causing hibernation_snapshot() to return early are used. This causes the system to be hardly usable, because the amount of preallocated memory is usually huge. Fix this problem. Reported-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki Acked-by: Srivatsa S. Bhat diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 196c0126..a6b0503 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -347,7 +347,7 @@ int hibernation_snapshot(int platform_mode) error = freeze_kernel_threads(); if (error) - goto Close; + goto Cleanup; if (hibernation_test(TEST_FREEZER) || hibernation_testmode(HIBERNATION_TESTPROC)) { @@ -357,12 +357,14 @@ int hibernation_snapshot(int platform_mode) * successful freezer test. */ freezer_test_done = true; - goto Close; + goto Cleanup; } error = dpm_prepare(PMSG_FREEZE); - if (error) - goto Complete_devices; + if (error) { + dpm_complete(msg); + goto Cleanup; + } suspend_console(); pm_restrict_gfp_mask(); @@ -391,8 +393,6 @@ int hibernation_snapshot(int platform_mode) pm_restore_gfp_mask(); resume_console(); - - Complete_devices: dpm_complete(msg); Close: @@ -402,6 +402,10 @@ int hibernation_snapshot(int platform_mode) Recover_platform: platform_recover(platform_mode); goto Resume_devices; + + Cleanup: + swsusp_free(); + goto Close; } /** -- cgit v0.10.2 From c16a98ed91597b40b22b540c6517103497ef8e74 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 23 Nov 2011 15:49:31 -0500 Subject: ipv6: tcp: fix panic in SYN processing commit 72a3effaf633bc ([NET]: Size listen hash tables using backlog hint) added a bug allowing inet6_synq_hash() to return an out of bound array index, because of u16 overflow. Bug can happen if system admins set net.core.somaxconn & net.ipv4.tcp_max_syn_backlog sysctls to values greater than 65536 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index fee46d5..1567fb1 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -85,7 +85,7 @@ struct dst_entry *inet6_csk_route_req(struct sock *sk, * request_sock (formerly open request) hash tables. */ static u32 inet6_synq_hash(const struct in6_addr *raddr, const __be16 rport, - const u32 rnd, const u16 synq_hsize) + const u32 rnd, const u32 synq_hsize) { u32 c; -- cgit v0.10.2 From 46a246c4dff9f248913e791b69f2336cd8d4ec41 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 23 Nov 2011 16:07:00 -0500 Subject: netfilter: Remove NOTRACK/RAW dependency on NETFILTER_ADVANCED. Distributions are using this in their default scripts, so don't hide them behind the advanced setting. Reported-by: Linus Torvalds Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 1dfc18a..f19f218 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -325,7 +325,6 @@ config IP_NF_TARGET_TTL # raw + specific targets config IP_NF_RAW tristate 'raw table support (required for NOTRACK/TRACE)' - depends on NETFILTER_ADVANCED help This option adds a `raw' table to iptables. This table is the very first in the netfilter framework and hooks in at the PREROUTING diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index 4484648..f792b34 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -186,7 +186,6 @@ config IP6_NF_MANGLE config IP6_NF_RAW tristate 'raw table support (required for TRACE)' - depends on NETFILTER_ADVANCED help This option adds a `raw' table to ip6tables. This table is the very first in the netfilter framework and hooks in at the PREROUTING diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 8260b13..e8f3796 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -542,7 +542,6 @@ config NETFILTER_XT_TARGET_NOTRACK tristate '"NOTRACK" target support' depends on IP_NF_RAW || IP6_NF_RAW depends on NF_CONNTRACK - depends on NETFILTER_ADVANCED help The NOTRACK target allows a select rule to specify which packets *not* to enter the conntrack/NAT -- cgit v0.10.2 From 8d715f0024f64ad1b1be85d8c081cf577944c847 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 18 Nov 2011 20:39:01 -0800 Subject: drm/i915: add multi-threaded forcewake support On IVB C0+ with newer BIOSes, the forcewake handshake has changed. There's now a bitfield for different driver components to keep the GT powered on. On Linux, we centralize forcewake handling in one place, so we still just need a single bit, but we need to use the new registers if MT forcewake is enabled. This needs testing on affected machines. Please reply with your tested-by if you had problems after a BIOS upgrade and this patch fixes them. v2: force MT mode. shift by 16 v3: set MT force wake bits then check ECOBUS Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42923 Tested-by: Manoj Iyer Tested-by: Robert Hooker Tested-by: Keith Packard Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 15bfa91..28836fe 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -328,7 +328,7 @@ void intel_detect_pch(struct drm_device *dev) } } -static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) +void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) { int count; @@ -344,6 +344,22 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) udelay(10); } +void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) +{ + int count; + + count = 0; + while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1)) + udelay(10); + + I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1); + POSTING_READ(FORCEWAKE_MT); + + count = 0; + while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0) + udelay(10); +} + /* * Generally this is called implicitly by the register read function. However, * if some sequence requires the GT to not power down then this function should @@ -356,15 +372,21 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) /* Forcewake is atomic in case we get in here without the lock */ if (atomic_add_return(1, &dev_priv->forcewake_count) == 1) - __gen6_gt_force_wake_get(dev_priv); + dev_priv->display.force_wake_get(dev_priv); } -static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) +void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); POSTING_READ(FORCEWAKE); } +void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) +{ + I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0); + POSTING_READ(FORCEWAKE_MT); +} + /* * see gen6_gt_force_wake_get() */ @@ -373,7 +395,7 @@ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); if (atomic_dec_and_test(&dev_priv->forcewake_count)) - __gen6_gt_force_wake_put(dev_priv); + dev_priv->display.force_wake_put(dev_priv); } void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) @@ -903,8 +925,9 @@ MODULE_LICENSE("GPL and additional rights"); /* We give fast paths for the really cool registers */ #define NEEDS_FORCE_WAKE(dev_priv, reg) \ (((dev_priv)->info->gen >= 6) && \ - ((reg) < 0x40000) && \ - ((reg) != FORCEWAKE)) + ((reg) < 0x40000) && \ + ((reg) != FORCEWAKE) && \ + ((reg) != ECOBUS)) #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4a9c1b9..8ba88cf 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -107,6 +107,7 @@ struct opregion_header; struct opregion_acpi; struct opregion_swsci; struct opregion_asle; +struct drm_i915_private; struct intel_opregion { struct opregion_header *header; @@ -221,6 +222,8 @@ struct drm_i915_display_funcs { struct drm_i915_gem_object *obj); int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y); + void (*force_wake_get)(struct drm_i915_private *dev_priv); + void (*force_wake_put)(struct drm_i915_private *dev_priv); /* clock updates for mode set */ /* cursor updates */ /* render clock increase/decrease */ @@ -1308,6 +1311,11 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val); extern void intel_detect_pch(struct drm_device *dev); extern int intel_trans_dp_port_sel(struct drm_crtc *crtc); +extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv); + /* overlay */ #ifdef CONFIG_DEBUG_FS extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev); @@ -1352,8 +1360,9 @@ void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv); /* We give fast paths for the really cool registers */ #define NEEDS_FORCE_WAKE(dev_priv, reg) \ (((dev_priv)->info->gen >= 6) && \ - ((reg) < 0x40000) && \ - ((reg) != FORCEWAKE)) + ((reg) < 0x40000) && \ + ((reg) != FORCEWAKE) && \ + ((reg) != ECOBUS)) #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b080cc8..8990057 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3449,6 +3449,10 @@ #define FORCEWAKE 0xA18C #define FORCEWAKE_ACK 0x130090 +#define FORCEWAKE_MT 0xa188 /* multi-threaded */ +#define FORCEWAKE_MT_ACK 0x130040 +#define ECOBUS 0xa180 +#define FORCEWAKE_MT_ENABLE (1<<5) #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e77a863..633c693 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8491,6 +8491,28 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { + dev_priv->display.force_wake_get = __gen6_gt_force_wake_get; + dev_priv->display.force_wake_put = __gen6_gt_force_wake_put; + + /* IVB configs may use multi-threaded forcewake */ + if (IS_IVYBRIDGE(dev)) { + u32 ecobus; + + mutex_lock(&dev->struct_mutex); + __gen6_gt_force_wake_mt_get(dev_priv); + ecobus = I915_READ(ECOBUS); + __gen6_gt_force_wake_mt_put(dev_priv); + mutex_unlock(&dev->struct_mutex); + + if (ecobus & FORCEWAKE_MT_ENABLE) { + DRM_DEBUG_KMS("Using MT version of forcewake\n"); + dev_priv->display.force_wake_get = + __gen6_gt_force_wake_mt_get; + dev_priv->display.force_wake_put = + __gen6_gt_force_wake_mt_put; + } + } + if (HAS_PCH_IBX(dev)) dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; else if (HAS_PCH_CPT(dev)) -- cgit v0.10.2 From 1a2eb4604b85c5efb343da8a4dcf41288fcfca85 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 16 Nov 2011 16:26:07 -0800 Subject: drm/i915: Hook up Ivybridge eDP The Ivybridge eDP control register looks like a cross between a Cougarpoint PCH DP control register and a Sandybridge eDP control register. Where things trivially match, share the code. Where there are any tricky bits, just split things out into two obviously separate code paths. Signed-off-by: Keith Packard Tested-by: Fang Xun Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41991 diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 8990057..6ef68c7 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3447,6 +3447,24 @@ #define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22) #define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22) +/* IVB */ +#define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22) +#define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22) +#define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22) +#define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22) +#define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22) +#define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22) +#define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x33 <<22) + +/* legacy values */ +#define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22) +#define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22) +#define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22) +#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22) +#define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22) + +#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) + #define FORCEWAKE 0xA18C #define FORCEWAKE_ACK 0x130090 #define FORCEWAKE_MT 0xa188 /* multi-threaded */ diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 4d0358f..294f557 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -362,8 +362,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, * clock divider. */ if (is_cpu_edp(intel_dp)) { - if (IS_GEN6(dev)) - aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */ + if (IS_GEN6(dev) || IS_GEN7(dev)) + aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */ else aux_clock_divider = 225; /* eDP input clock at 450Mhz */ } else if (HAS_PCH_SPLIT(dev)) @@ -817,10 +817,11 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } /* - * There are three kinds of DP registers: + * There are four kinds of DP registers: * * IBX PCH - * CPU + * SNB CPU + * IVB CPU * CPT PCH * * IBX PCH and CPU are the same for almost everything, @@ -873,7 +874,25 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* Split out the IBX/CPU vs CPT settings */ - if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) { + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + intel_dp->DP |= intel_crtc->pipe << 29; + + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { intel_dp->DP |= intel_dp->color_range; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) @@ -1375,34 +1394,59 @@ static char *link_train_names[] = { * These are source-specific values; current Intel hardware supports * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ -#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 -#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t -intel_dp_pre_emphasis_max(uint8_t voltage_swing) +intel_dp_voltage_max(struct intel_dp *intel_dp) { - switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { - case DP_TRAIN_VOLTAGE_SWING_400: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_600: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_800: - return DP_TRAIN_PRE_EMPHASIS_3_5; - case DP_TRAIN_VOLTAGE_SWING_1200: - default: - return DP_TRAIN_PRE_EMPHASIS_0; + struct drm_device *dev = intel_dp->base.base.dev; + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_800; + else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_1200; + else + return DP_TRAIN_VOLTAGE_SWING_800; +} + +static uint8_t +intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) +{ + struct drm_device *dev = intel_dp->base.base.dev; + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } } } static void intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { - struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); - int voltage_max; + uint8_t voltage_max; + uint8_t preemph_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); @@ -1414,15 +1458,13 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - voltage_max = I830_DP_VOLTAGE_MAX_CPT; - else - voltage_max = I830_DP_VOLTAGE_MAX; + voltage_max = intel_dp_voltage_max(intel_dp); if (v >= voltage_max) v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; - if (p >= intel_dp_pre_emphasis_max(v)) - p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); + if (p >= preemph_max) + p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; for (lane = 0; lane < 4; lane++) intel_dp->train_set[lane] = v | p; @@ -1494,6 +1536,37 @@ intel_gen6_edp_signal_levels(uint8_t train_set) } } +/* Gen7's DP voltage swing and pre-emphasis control */ +static uint32_t +intel_gen7_edp_signal_levels(uint8_t train_set) +{ + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400MV_6DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_600MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600MV_3_5DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_800MV_3_5DB_IVB; + + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_500MV_0DB_IVB; + } +} + static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) @@ -1599,7 +1672,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP_LINK_CONFIGURATION_SIZE); DP |= DP_PORT_EN; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) DP &= ~DP_LINK_TRAIN_MASK_CPT; else DP &= ~DP_LINK_TRAIN_MASK; @@ -1613,7 +1687,11 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1622,7 +1700,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_PAT_1_CPT; else reg = DP | DP_LINK_TRAIN_PAT_1; @@ -1703,7 +1781,10 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1711,7 +1792,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_PAT_2_CPT; else reg = DP | DP_LINK_TRAIN_PAT_2; @@ -1752,7 +1833,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) ++tries; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_OFF_CPT; else reg = DP | DP_LINK_TRAIN_OFF; @@ -1782,7 +1863,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) udelay(100); } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) { DP &= ~DP_LINK_TRAIN_MASK_CPT; I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT); } else { @@ -1794,7 +1875,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); if (is_edp(intel_dp)) { - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) DP |= DP_LINK_TRAIN_OFF_CPT; else DP |= DP_LINK_TRAIN_OFF; -- cgit v0.10.2 From ca88479c1c3b7b1a9f94320745f5331e1de77f80 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 18 Nov 2011 11:09:24 -0800 Subject: drm/i915: Treat pre-gen4 backlight duty cycle value consistently For i945 and earlier chips, the backlight frequency value had the low bit (of 16) fixed to zero. The Pineview code path handled this by just exposing the backlight range as 15 bits while other chips had the backlight range limited to 0 .. 0xfffe. This patch makes everyone take the pineview code path, providing 15 bits of backlight duty cycle range which seems more than sufficient to me. Daniel Mack reported that writing 1 to bit 0 of the duty cycle register was causing problems on his Samsung X20 notebook, even when the duty cycle value was less than the maximum backlight value. (He tried a value of 29749 with max_brightness of 29750). This patch never writes a '1' to that bit. Signed-off-by: Keith Packard Reviewed-by: Takashi Iwai Reported-and-tested-by: Daniel Mack Cc: stable@kernel.org diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 21f60b7..04d79fd 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -178,13 +178,10 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { max >>= 16; } else { - if (IS_PINEVIEW(dev)) { + if (INTEL_INFO(dev)->gen < 4) max >>= 17; - } else { + else max >>= 16; - if (INTEL_INFO(dev)->gen < 4) - max &= ~1; - } if (is_backlight_combination_mode(dev)) max *= 0xff; @@ -203,13 +200,12 @@ u32 intel_panel_get_backlight(struct drm_device *dev) val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; } else { val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; - if (IS_PINEVIEW(dev)) + if (INTEL_INFO(dev)->gen < 4) val >>= 1; if (is_backlight_combination_mode(dev)) { u8 lbpc; - val &= ~1; pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); val *= lbpc; } @@ -246,11 +242,9 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level } tmp = I915_READ(BLC_PWM_CTL); - if (IS_PINEVIEW(dev)) { - tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1); + if (INTEL_INFO(dev)->gen < 4) level <<= 1; - } else - tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; + tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_CTL, tmp | level); } -- cgit v0.10.2 From b59db43ad4434519feb338eacb01d77eb50825c5 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:02 -0600 Subject: eCryptfs: Prevent file create race condition The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146 Signed-off-by: Tyler Hicks Cc: stable@kernel.org diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 58609bd..203a1fd 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -967,7 +967,7 @@ static void ecryptfs_set_default_crypt_stat_vals( /** * ecryptfs_new_file_context - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_inode: The eCryptfs inode * * If the crypto context for the file has not yet been established, * this is where we do that. Establishing a new crypto context @@ -984,13 +984,13 @@ static void ecryptfs_set_default_crypt_stat_vals( * * Returns zero on success; non-zero otherwise */ -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry) +int ecryptfs_new_file_context(struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; struct ecryptfs_mount_crypt_stat *mount_crypt_stat = &ecryptfs_superblock_to_private( - ecryptfs_dentry->d_sb)->mount_crypt_stat; + ecryptfs_inode->i_sb)->mount_crypt_stat; int cipher_name_len; int rc = 0; @@ -1299,12 +1299,12 @@ static int ecryptfs_write_headers_virt(char *page_virt, size_t max, } static int -ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry, +ecryptfs_write_metadata_to_contents(struct inode *ecryptfs_inode, char *virt, size_t virt_len) { int rc; - rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt, + rc = ecryptfs_write_lower(ecryptfs_inode, virt, 0, virt_len); if (rc < 0) printk(KERN_ERR "%s: Error attempting to write header " @@ -1338,7 +1338,8 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, /** * ecryptfs_write_metadata - * @ecryptfs_dentry: The eCryptfs dentry + * @ecryptfs_dentry: The eCryptfs dentry, which should be negative + * @ecryptfs_inode: The newly created eCryptfs inode * * Write the file headers out. This will likely involve a userspace * callout, in which the session key is encrypted with one or more @@ -1348,10 +1349,11 @@ static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask, * * Returns zero on success; non-zero on error */ -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; unsigned int order; char *virt; size_t virt_len; @@ -1391,7 +1393,7 @@ int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry) rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt, size); else - rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt, + rc = ecryptfs_write_metadata_to_contents(ecryptfs_inode, virt, virt_len); if (rc) { printk(KERN_ERR "%s: Error writing metadata out to lower file; " diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 54481a3..a9f29b1 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -584,9 +584,10 @@ int ecryptfs_init_crypt_ctx(struct ecryptfs_crypt_stat *crypt_stat); int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode); int ecryptfs_encrypt_page(struct page *page); int ecryptfs_decrypt_page(struct page *page); -int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry); +int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode); int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry); -int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry); +int ecryptfs_new_file_context(struct inode *ecryptfs_inode); void ecryptfs_write_crypt_stat_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat, size_t *written); diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index a36d327..32f90a3a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -172,22 +172,23 @@ ecryptfs_create_underlying_file(struct inode *lower_dir_inode, * it. It will also update the eCryptfs directory inode to mimic the * stat of the lower directory inode. * - * Returns zero on success; non-zero on error condition + * Returns the new eCryptfs inode on success; an ERR_PTR on error condition */ -static int +static struct inode * ecryptfs_do_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode) { int rc; struct dentry *lower_dentry; struct dentry *lower_dir_dentry; + struct inode *inode; lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry); lower_dir_dentry = lock_parent(lower_dentry); if (IS_ERR(lower_dir_dentry)) { ecryptfs_printk(KERN_ERR, "Error locking directory of " "dentry\n"); - rc = PTR_ERR(lower_dir_dentry); + inode = ERR_CAST(lower_dir_dentry); goto out; } rc = ecryptfs_create_underlying_file(lower_dir_dentry->d_inode, @@ -195,20 +196,19 @@ ecryptfs_do_create(struct inode *directory_inode, if (rc) { printk(KERN_ERR "%s: Failure to create dentry in lower fs; " "rc = [%d]\n", __func__, rc); + inode = ERR_PTR(rc); goto out_lock; } - rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - directory_inode->i_sb); - if (rc) { - ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n"); + inode = __ecryptfs_get_inode(lower_dentry->d_inode, + directory_inode->i_sb); + if (IS_ERR(inode)) goto out_lock; - } fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode); fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode); out_lock: unlock_dir(lower_dir_dentry); out: - return rc; + return inode; } /** @@ -219,26 +219,26 @@ out: * * Returns zero on success */ -static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) +static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry, + struct inode *ecryptfs_inode) { struct ecryptfs_crypt_stat *crypt_stat = - &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat; + &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; int rc = 0; - if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) { + if (S_ISDIR(ecryptfs_inode->i_mode)) { ecryptfs_printk(KERN_DEBUG, "This is a directory\n"); crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED); goto out; } ecryptfs_printk(KERN_DEBUG, "Initializing crypto context\n"); - rc = ecryptfs_new_file_context(ecryptfs_dentry); + rc = ecryptfs_new_file_context(ecryptfs_inode); if (rc) { ecryptfs_printk(KERN_ERR, "Error creating new file " "context; rc = [%d]\n", rc); goto out; } - rc = ecryptfs_get_lower_file(ecryptfs_dentry, - ecryptfs_dentry->d_inode); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, ecryptfs_inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " @@ -246,10 +246,10 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) ecryptfs_dentry->d_name.name, rc); goto out; } - rc = ecryptfs_write_metadata(ecryptfs_dentry); + rc = ecryptfs_write_metadata(ecryptfs_dentry, ecryptfs_inode); if (rc) printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc); - ecryptfs_put_lower_file(ecryptfs_dentry->d_inode); + ecryptfs_put_lower_file(ecryptfs_inode); out: return rc; } @@ -269,18 +269,28 @@ static int ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry, int mode, struct nameidata *nd) { + struct inode *ecryptfs_inode; int rc; - /* ecryptfs_do_create() calls ecryptfs_interpose() */ - rc = ecryptfs_do_create(directory_inode, ecryptfs_dentry, mode); - if (unlikely(rc)) { + ecryptfs_inode = ecryptfs_do_create(directory_inode, ecryptfs_dentry, + mode); + if (unlikely(IS_ERR(ecryptfs_inode))) { ecryptfs_printk(KERN_WARNING, "Failed to create file in" "lower filesystem\n"); + rc = PTR_ERR(ecryptfs_inode); goto out; } /* At this point, a file exists on "disk"; we need to make sure * that this on disk file is prepared to be an ecryptfs file */ - rc = ecryptfs_initialize_file(ecryptfs_dentry); + rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode); + if (rc) { + drop_nlink(ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); + iput(ecryptfs_inode); + goto out; + } + d_instantiate(ecryptfs_dentry, ecryptfs_inode); + unlock_new_inode(ecryptfs_inode); out: return rc; } -- cgit v0.10.2 From 32001d6fe9ac6b0423e674a3093aa56740849f3b Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 21 Nov 2011 17:31:29 -0600 Subject: eCryptfs: Flush file in vma close Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326 Signed-off-by: Tyler Hicks Cc: stable@kernel.org [2.6.39+] diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index c6ac98c..d3f95f9 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -139,6 +139,27 @@ out: return rc; } +static void ecryptfs_vma_close(struct vm_area_struct *vma) +{ + filemap_write_and_wait(vma->vm_file->f_mapping); +} + +static const struct vm_operations_struct ecryptfs_file_vm_ops = { + .close = ecryptfs_vma_close, + .fault = filemap_fault, +}; + +static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + int rc; + + rc = generic_file_mmap(file, vma); + if (!rc) + vma->vm_ops = &ecryptfs_file_vm_ops; + + return rc; +} + struct kmem_cache *ecryptfs_file_info_cache; /** @@ -349,7 +370,7 @@ const struct file_operations ecryptfs_main_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ecryptfs_compat_ioctl, #endif - .mmap = generic_file_mmap, + .mmap = ecryptfs_file_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, -- cgit v0.10.2 From 15ac2b08a2fd0f4aacbe8ae39788252fea6fbe63 Mon Sep 17 00:00:00 2001 From: Xander Hover Date: Wed, 23 Nov 2011 16:40:31 -0500 Subject: b44: Use dev_kfree_skb_irq() in b44_tx() Reported issues when using dev_kfree_skb() on UP systems and systems with low numbers of cores. dev_kfree_skb_irq() will properly save IRQ state before freeing the skb. Tested on 3.1.1 and 3.2_rc2 Example of reproducible trace of kernel 3.1.1 ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79() ... Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1 Call Trace: [] warn_slowpath_common+0x65/0x7a [] ? local_bh_enable+0x32/0x79 [] warn_slowpath_null+0xf/0x13 [] local_bh_enable+0x32/0x79 [] destroy_conntrack+0x7c/0x9b [] nf_conntrack_destroy+0x1f/0x26 [] skb_release_head_state+0x74/0x83 [] __kfree_skb+0xb/0x6b [] consume_skb+0x24/0x26 [] b44_poll+0xaa/0x449 [] net_rx_action+0x3f/0xea [] __do_softirq+0x5f/0xd5 [] ? local_bh_enable+0x79/0x79 [] ? irq_exit+0x34/0x8d [] ? do_IRQ+0x74/0x87 [] ? common_interrupt+0x29/0x30 [] ? default_idle+0x29/0x3e [] ? cpu_idle+0x2f/0x5d [] ? rest_init+0x79/0x7b [] ? start_kernel+0x297/0x29c [] ? i386_start_kernel+0xb0/0xb7 ---[ end trace 583f33bb1aa207a9 ]--- Signed-off-by: Xander Hover Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 4cf835d..3fb66d0 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp) skb->len, DMA_TO_DEVICE); rp->skb = NULL; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); } bp->tx_cons = cons; -- cgit v0.10.2 From 0f751e641a71157aa584c2a2e22fda52b52b8a56 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 23 Nov 2011 11:31:24 -0600 Subject: eCryptfs: Extend array bounds for all filename chars From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: Tyler Hicks Reported-by: Michael Halcrow Cc: stable@kernel.org diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 203a1fd..2a83425 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1945,7 +1945,7 @@ static unsigned char *portable_filename_chars = ("-.0123456789ABCD" /* We could either offset on every reverse map or just pad some 0x00's * at the front here */ -static const unsigned char filename_rev_map[] = { +static const unsigned char filename_rev_map[256] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 15 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 23 */ @@ -1961,7 +1961,7 @@ static const unsigned char filename_rev_map[] = { 0x00, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, /* 103 */ 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, /* 111 */ 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, /* 119 */ - 0x3D, 0x3E, 0x3F + 0x3D, 0x3E, 0x3F /* 123 - 255 initialized to 0x00 */ }; /** -- cgit v0.10.2 From 4d0fe50c75a547088e4304e5eb5f521514dfae46 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 23 Nov 2011 17:29:23 -0500 Subject: ipv6: tcp: fix tcp_v6_conn_request() Since linux 2.6.26 (commit c6aefafb7ec6 : Add IPv6 support to TCP SYN cookies), we can drop a SYN packet reusing a TIME_WAIT socket. (As a matter of fact we fail to send the SYNACK answer) As the client resends its SYN packet after a one second timeout, we accept it, because first packet removed the TIME_WAIT socket before being dropped. This probably explains why nobody ever noticed or complained. Reported-by: Jesse Young Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 36131d1..2dea4bb 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1255,6 +1255,13 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) if (!want_cookie || tmp_opt.tstamp_ok) TCP_ECN_create_request(req, tcp_hdr(skb)); + treq->iif = sk->sk_bound_dev_if; + + /* So that link locals have meaning */ + if (!sk->sk_bound_dev_if && + ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL) + treq->iif = inet6_iif(skb); + if (!isn) { struct inet_peer *peer = NULL; @@ -1264,12 +1271,6 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) atomic_inc(&skb->users); treq->pktopts = skb; } - treq->iif = sk->sk_bound_dev_if; - - /* So that link locals have meaning */ - if (!sk->sk_bound_dev_if && - ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL) - treq->iif = inet6_iif(skb); if (want_cookie) { isn = cookie_v6_init_sequence(sk, skb, &req->mss); -- cgit v0.10.2 From 685f94e6db8496399c881218018166515445a914 Mon Sep 17 00:00:00 2001 From: Jun Zhao Date: Tue, 22 Nov 2011 17:19:03 +0000 Subject: ipv4 : igmp : fix error handle in ip_mc_add_src() When add sources to interface failure, need to roll back the sfcount[MODE] to before state. We need to match it corresponding. Acked-by: David L Stevens Acked-by: Eric Dumazet Signed-off-by: Jun Zhao Signed-off-by: David S. Miller diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index c7472ef..b2ca095 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1716,7 +1716,8 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode, if (err) { int j; - pmc->sfcount[sfmode]--; + if (!delta) + pmc->sfcount[sfmode]--; for (j=0; jsfcount[MCAST_EXCLUDE] != 0)) { -- cgit v0.10.2 From cc1b0765da6078b906772b79ff211b88cc0ae958 Mon Sep 17 00:00:00 2001 From: sricharan Date: Wed, 23 Nov 2011 14:35:07 -0800 Subject: ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson Signed-off-by: Santosh Shilimkar Signed-off-by: sricharan Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6b3088d..207a2ff 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh) ohii = &oh->mpu_irqs[i++]; } while (ohii->irq != -1); - return i; + return i-1; } /** @@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh) ohdi = &oh->sdma_reqs[i++]; } while (ohdi->dma_req != -1); - return i; + return i-1; } /** @@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) mem = &os->addr[i++]; } while (mem->pa_start != mem->pa_end); - return i; + return i-1; } /** -- cgit v0.10.2 From 46232a3622c6e33605906ee6690dfef372925f53 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Nov 2011 14:43:01 -0800 Subject: ARM: OMAP: PM: only register TWL with voltage layer when device is present Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e79bdf..00bff46 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -24,6 +24,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "twl-common.h" static struct omap_device_pm_latency *pm_lats; @@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { - /* Init the OMAP TWL parameters */ - omap3_twl_init(); - omap4_twl_init(); - /* Init the voltage layer */ + omap_pmic_late_init(); omap_voltage_late_init(); /* Initialize the voltages */ diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 52243577..10b20c6 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -30,6 +30,7 @@ #include #include "twl-common.h" +#include "pm.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap_pmic_late_init(void) +{ + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); +} + #if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 5e83a5b..275dde8 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,6 +1,8 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ +#include + #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) #define TWL_COMMON_PDATA_MADC (1 << 2) @@ -30,6 +32,7 @@ struct twl4030_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); +void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) -- cgit v0.10.2 From 5a4f1844c2ba21f804d7729306d9b16eaeb724a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Nov 2011 14:43:37 -0800 Subject: ARM: OMAP: smartreflex: fix IRQ handling bug Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi Signed-off-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 6a4f683..cf246b3 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, ERRCONFIG_V1, status); } else if (sr_info->ip_type == SR_TYPE_V2) { /* Read the status bits */ - sr_read_reg(sr_info, IRQSTATUS); + status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); -- cgit v0.10.2 From a8a6565c7615cab3608d75af95b5c8a3522cd7c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 23 Nov 2011 14:44:50 -0800 Subject: ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5034147..e1293aa 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 -- cgit v0.10.2 From 52a2396249478018ea2e83d962a347d38d8cccbe Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 23 Nov 2011 14:45:22 -0800 Subject: ARM: OMAP2+: Remove empty io.h The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h deleted file mode 100644 index e69de29..0000000 -- cgit v0.10.2 From 8770b07c2dff3cec2c751b289ee690137c88ea54 Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Wed, 23 Nov 2011 14:45:37 -0800 Subject: ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 6a66aa5..d15225f 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", }, {}, -} +}; MODULE_DEVICE_TABLE(of, l3_noc_match); #else #define l3_noc_match NULL -- cgit v0.10.2 From 1d125bd52e1e1b9810a2d5a32a76147912fa4133 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 23 Nov 2011 03:54:08 +0000 Subject: bnx2x: Fix 5461x LED Fix port identify test on 5461x PHY by driving LEDs through MDIO. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index bce203f..882f48f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10327,6 +10327,43 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, return 0; } + +static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 temp; + + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL1); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= 0xff00; + + DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode); + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + temp |= 0x00ee; + break; + case LED_MODE_OPER: + temp |= 0x0001; + break; + case LED_MODE_ON: + temp |= 0x00ff; + break; + default: + break; + } + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + return; +} + + static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -11103,7 +11140,7 @@ static struct bnx2x_phy phy_54618se = { .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_5461x_set_link_led, .phy_specific_func = (phy_specific_func_t)NULL }; /*****************************************************************/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index fc7bd0f..e58073e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6990,6 +6990,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_REG_INTR_MASK 0x1b #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) #define MDIO_REG_GPHY_SHADOW 0x1c +#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) -- cgit v0.10.2 From 782428535e0819b5b7c9825cd3faa2ad37032a70 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 23 Nov 2011 13:10:42 +0000 Subject: qlge: fix size of external list for TX address descriptors When transmiting a fragmented skb, qlge fills a descriptor with the fragment addresses, after DMA-mapping them. If there are more than eight fragments, it will use the eighth descriptor as a pointer to an external list. After mapping this external list, called OAL to a structure containing more descriptors, it fills it with the extra fragments. However, considering that systems with pages larger than 8KiB would have less than 8 fragments, which was true before commit a715dea3c8e, it defined a macro for the OAL size as 0 in those cases. Now, if a skb with more than 8 fragments (counting skb->data as one fragment), this would start overwriting the list of addresses already mapped and would make the driver fail to properly unmap the right addresses on architectures with pages larger than 8KiB. Besides that, the list of mappings was one size too small, since it must have a mapping for the maxinum number of skb fragments plus one for skb->data and another for the OAL. So, even on architectures with page sizes 4KiB and 8KiB, a skb with the maximum number of fragments would make the driver overwrite its counter for the number of mappings, which, again, would make it fail to unmap the mapped DMA addresses. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index 8731f79..b8478aa 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -58,10 +58,8 @@ #define TX_DESC_PER_IOCB 8 -/* The maximum number of frags we handle is based - * on PAGE_SIZE... - */ -#if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13) /* 4k & 8k pages */ + +#if ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) > 0 #define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) #else /* all other page sizes */ #define TX_DESC_PER_OAL 0 @@ -1353,7 +1351,7 @@ struct tx_ring_desc { struct ob_mac_iocb_req *queue_entry; u32 index; struct oal oal; - struct map_list map[MAX_SKB_FRAGS + 1]; + struct map_list map[MAX_SKB_FRAGS + 2]; int map_cnt; struct tx_ring_desc *next; }; -- cgit v0.10.2 From aa9084a01a7893a9f4bed98aa29081f15d403a88 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 23 Nov 2011 00:13:02 +0000 Subject: ehea: Reduce memory usage in buffer pools Now that we enable multiqueue by default the ehea driver is using quite a lot of memory for its buffer pools. With 4 queues we consume 64MB in the jumbo packet ring, 16MB in the medium packet ring and 16MB in the tiny packet ring. We should only fill the jumbo ring once the MTU is increased but for now halve it's size so it consumes 32MB. Also reduce the tiny packet ring, with 4 queues we had 16k entries which is overkill. Signed-off-by: Anton Blanchard Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ehea/ehea.h b/drivers/net/ethernet/ibm/ehea/ehea.h index 410d6a1..6650068 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea.h +++ b/drivers/net/ethernet/ibm/ehea/ehea.h @@ -61,9 +61,9 @@ #ifdef EHEA_SMALL_QUEUES #define EHEA_MAX_CQE_COUNT 1023 #define EHEA_DEF_ENTRIES_SQ 1023 -#define EHEA_DEF_ENTRIES_RQ1 4095 +#define EHEA_DEF_ENTRIES_RQ1 1023 #define EHEA_DEF_ENTRIES_RQ2 1023 -#define EHEA_DEF_ENTRIES_RQ3 1023 +#define EHEA_DEF_ENTRIES_RQ3 511 #else #define EHEA_MAX_CQE_COUNT 4080 #define EHEA_DEF_ENTRIES_SQ 4080 -- cgit v0.10.2 From 67c170a24fc6669f8f7c0864d75caadef0a8e5e6 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 23 Nov 2011 00:13:54 +0000 Subject: ehea: Use round_jiffies_relative to align workqueue Use round_jiffies_relative to align the ehea workqueue and avoid extra wakeups. Signed-off-by: Anton Blanchard Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 37b70f7..bfeccbf 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -371,7 +371,8 @@ static void ehea_update_stats(struct work_struct *work) out_herr: free_page((unsigned long)cb2); resched: - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); } static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes) @@ -2434,7 +2435,8 @@ static int ehea_open(struct net_device *dev) } mutex_unlock(&port->port_lock); - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); return ret; } -- cgit v0.10.2 From ac8a48106be49c422575ddc7531b776f8eb49610 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Tue, 22 Nov 2011 23:33:10 +0000 Subject: ipv4: Save nexthop address of LSRR/SSRR option to IPCB. We can not update iph->daddr in ip_options_rcv_srr(), It is too early. When some exception ocurred later (eg. in ip_forward() when goto sr_failed) we need the ip header be identical to the original one as ICMP need it. Add a field 'nexthop' in struct ip_options to save nexthop of LSRR or SSRR option. Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index b897d6e..f941964 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -31,6 +31,7 @@ /** struct ip_options - IP Options * * @faddr - Saved first hop address + * @nexthop - Saved nexthop address in LSRR and SSRR * @is_data - Options in __data, rather than skb * @is_strictroute - Strict source route * @srr_is_hit - Packet destination addr was our one @@ -41,6 +42,7 @@ */ struct ip_options { __be32 faddr; + __be32 nexthop; unsigned char optlen; unsigned char srr; unsigned char rr; diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 3b34d1c..29a07b6 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -84,7 +84,7 @@ int ip_forward(struct sk_buff *skb) rt = skb_rtable(skb); - if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway) + if (opt->is_strictroute && opt->nexthop != rt->rt_gateway) goto sr_failed; if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) && diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c index 05d20cc..1e60f76 100644 --- a/net/ipv4/ip_options.c +++ b/net/ipv4/ip_options.c @@ -568,12 +568,13 @@ void ip_forward_options(struct sk_buff *skb) ) { if (srrptr + 3 > srrspace) break; - if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0) + if (memcmp(&opt->nexthop, &optptr[srrptr-1], 4) == 0) break; } if (srrptr + 3 <= srrspace) { opt->is_changed = 1; ip_rt_get_source(&optptr[srrptr-1], skb, rt); + ip_hdr(skb)->daddr = opt->nexthop; optptr[2] = srrptr+4; } else if (net_ratelimit()) printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n"); @@ -640,7 +641,7 @@ int ip_options_rcv_srr(struct sk_buff *skb) } if (srrptr <= srrspace) { opt->srr_is_hit = 1; - iph->daddr = nexthop; + opt->nexthop = nexthop; opt->is_changed = 1; } return 0; -- cgit v0.10.2 From bd20817f733ceb0291e0449106307ffc939006ba Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 15 Nov 2011 10:13:24 +0100 Subject: virtio: add HAS_IOMEM dependency to MMIO platform bus driver Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger Signed-off-by: Heiko Carstens Acked-by: Pawel Moll Signed-off-by: Rusty Russell diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 816ed08..1a61939 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -37,7 +37,7 @@ config VIRTIO_BALLOON config VIRTIO_MMIO tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on HAS_IOMEM && EXPERIMENTAL select VIRTIO select VIRTIO_RING ---help--- -- cgit v0.10.2 From fe1a7fe2c4456679b3402f04268bdfafca7b127a Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 15 Nov 2011 16:17:18 +0200 Subject: virtio-mmio: Correct the name of the guest features selector Guest features selector spelling mistake. Cc: Pawel Moll Cc: Rusty Russell Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index acc5e43..7317dc2e 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -118,7 +118,7 @@ static void vm_finalize_features(struct virtio_device *vdev) vring_transport_features(vdev); for (i = 0; i < ARRAY_SIZE(vdev->features); i++) { - writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET); + writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SEL); writel(vdev->features[i], vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES); } diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h index 27c7ede..5c7b6f0 100644 --- a/include/linux/virtio_mmio.h +++ b/include/linux/virtio_mmio.h @@ -63,7 +63,7 @@ #define VIRTIO_MMIO_GUEST_FEATURES 0x020 /* Activated features set selector - Write Only */ -#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024 +#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 /* Guest's memory page size in bytes - Write Only */ #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 -- cgit v0.10.2 From e6af578c5305be693a1bc7f4dc7b51dd82d41425 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 17 Nov 2011 17:41:15 +0200 Subject: virtio-pci: make reset operation safer virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 3d1bf41..03d1984 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -169,11 +169,29 @@ static void vp_set_status(struct virtio_device *vdev, u8 status) iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS); } +/* wait for pending irq handlers */ +static void vp_synchronize_vectors(struct virtio_device *vdev) +{ + struct virtio_pci_device *vp_dev = to_vp_device(vdev); + int i; + + if (vp_dev->intx_enabled) + synchronize_irq(vp_dev->pci_dev->irq); + + for (i = 0; i < vp_dev->msix_vectors; ++i) + synchronize_irq(vp_dev->msix_entries[i].vector); +} + static void vp_reset(struct virtio_device *vdev) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* 0 status means a reset. */ iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush out the status write, and flush in device writes, + * including MSi-X interrupts, if any. */ + ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS); + /* Flush pending VQ/configuration callbacks. */ + vp_synchronize_vectors(vdev); } /* the notify function used when creating a virt queue */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index add4790..e9e72bd 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -85,6 +85,8 @@ * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again + * Device must not be reset from its vq/config callbacks, or in + * parallel with being added/removed. * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device * nvqs: the number of virtqueues to find -- cgit v0.10.2 From caca6a03d365883564885f2c1da3e88dcf65d139 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Nov 2011 20:20:28 -0800 Subject: Linux 3.2-rc3 diff --git a/Makefile b/Makefile index dab8610..3a8f064 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From c3c3ced77fd1949af753be7731bfdadae88a226b Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Mon, 7 Nov 2011 16:32:58 +0800 Subject: powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d9b7767..d3b4782 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -449,6 +449,7 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* IRQ[0:3] are pulled up on board, set to active-low */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 @@ -488,11 +489,15 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 + 0000 0 0 1 &mpic 4 2 + 0000 0 0 2 &mpic 5 2 + 0000 0 0 3 &mpic 6 2 0000 0 0 4 &mpic 7 1 >; ranges = <0x2000000 0x0 0xa0000000 @@ -527,12 +532,16 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 8 1 0000 0 0 2 &mpic 9 1 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 + 0000 0 0 4 &mpic 11 2 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 -- cgit v0.10.2 From a92282524aee149de0014eef10a0771d1d19821f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 13 Nov 2011 00:50:30 +0100 Subject: powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO' The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle Acked-by: Wolfram Sang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 45023e2..d7946be2 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -203,7 +203,7 @@ config P3060_QDS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help -- cgit v0.10.2 From 05011f370a4f549da69f3841e319043728f65542 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 20 Nov 2011 09:58:11 -0600 Subject: powerpc/85xx: Fix compile error on p3060_qds.c arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c index 01dcf44..081cf4a 100644 --- a/arch/powerpc/platforms/85xx/p3060_qds.c +++ b/arch/powerpc/platforms/85xx/p3060_qds.c @@ -70,7 +70,7 @@ define_machine(p3060_qds) { .power_save = e500_idle, }; -machine_device_initcall(p3060_qds, declare_of_platform_devices); +machine_device_initcall(p3060_qds, corenet_ds_publish_devices); #ifdef CONFIG_SWIOTLB machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); -- cgit v0.10.2 From 42d623a8cd08eb93ab221d22cee5a62618895bbf Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 23 Nov 2011 09:14:38 -0600 Subject: slub: use irqsafe_cpu_cmpxchg for put_cpu_partial The cmpxchg must be irq safe. The fallback for this_cpu_cmpxchg only disables preemption which results in per cpu partial page operation potentially failing on non x86 platforms. This patch fixes the following problem reported by Christian Kujau: I seem to hit it with heavy disk & cpu IO is in progress on this PowerBook G4. Full dmesg & .config: http://nerdbynature.de/bits/3.2.0-rc1/oops/ I've enabled some debug options and now it really points to slub.c:2166 http://nerdbynature.de/bits/3.2.0-rc1/oops/oops4m.jpg With debug options enabled I'm currently in the xmon debugger, not sure what to make of it yet, I'll try to get something useful out of it :) Reported-by: Christian Kujau Tested-by: Christian Kujau Acked-by: Eric Dumazet Acked-by: David Rientjes Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 00efbb5..2a9cfd7 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1978,7 +1978,7 @@ int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain) page->pobjects = pobjects; page->next = oldpage; - } while (this_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage); + } while (irqsafe_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage); stat(s, CPU_PARTIAL_FREE); return pobjects; } -- cgit v0.10.2 From bc6697d8a506dedf09e8e9974ffa3a316183e608 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Nov 2011 16:02:02 +0100 Subject: slub: avoid potential NULL dereference or corruption show_slab_objects() can trigger NULL dereferences or memory corruption. Another cpu can change its c->page to NULL or c->node to NUMA_NO_NODE while we use them. Use ACCESS_ONCE(c->page) and ACCESS_ONCE(c->node) to make sure this cannot happen. Acked-by: Christoph Lameter Acked-by: David Rientjes Signed-off-by: Eric Dumazet Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 2a9cfd7..ed3334d 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4444,30 +4444,31 @@ static ssize_t show_slab_objects(struct kmem_cache *s, for_each_possible_cpu(cpu) { struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu); + int node = ACCESS_ONCE(c->node); struct page *page; - if (!c || c->node < 0) + if (node < 0) continue; - - if (c->page) { - if (flags & SO_TOTAL) - x = c->page->objects; + page = ACCESS_ONCE(c->page); + if (page) { + if (flags & SO_TOTAL) + x = page->objects; else if (flags & SO_OBJECTS) - x = c->page->inuse; + x = page->inuse; else x = 1; total += x; - nodes[c->node] += x; + nodes[node] += x; } page = c->partial; if (page) { x = page->pobjects; - total += x; - nodes[c->node] += x; + total += x; + nodes[node] += x; } - per_cpu[c->node]++; + per_cpu[node]++; } } -- cgit v0.10.2 From ae5f8c19827493e5a8d48c2c6a8a92201a94f08b Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 23 Aug 2011 14:30:05 +0200 Subject: powerpc/qe: Fixup QE_General4 errata QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund Acked-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 3363fbc..ceb09cb 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says that the BRG divisor must be even if you're not using divide-by-16 mode. */ - if (!div16 && (divisor & 1)) + if (!div16 && (divisor & 1) && (divisor > 3)) divisor++; tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | -- cgit v0.10.2 From 86f9a4330580b4ed3d5f7d5b0989ae69518c90f5 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Tue, 15 Nov 2011 14:52:22 -0800 Subject: drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac compatible in dts has been changed, so the driver needs to be updated accordingly. Signed-off-by: Shaohui Xie Cc: Grant Likely Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 8af8e86..73464a6 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -1128,7 +1128,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = { { .compatible = "fsl,p1020-memory-controller", }, { .compatible = "fsl,p1021-memory-controller", }, { .compatible = "fsl,p2020-memory-controller", }, - { .compatible = "fsl,p4080-memory-controller", }, + { .compatible = "fsl,qoriq-memory-controller", }, {}, }; MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); -- cgit v0.10.2 From 7145cf12095265b8a292835d0f6da87f89fac1d1 Mon Sep 17 00:00:00 2001 From: Alexandre Rusev Date: Thu, 27 Oct 2011 18:18:37 +0400 Subject: powerpc/fsl-lbc: Fix for fsl_upm If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index c4d96fa3..d5c3c90 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) err: iounmap(fsl_lbc_ctrl_dev->regs); kfree(fsl_lbc_ctrl_dev); + fsl_lbc_ctrl_dev = NULL; return ret; } -- cgit v0.10.2 From e3854b6e25d1b092c30c5f81a04fe6fc839b1e26 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 8 Aug 2011 13:18:02 +0200 Subject: arch/powerpc/sysdev/ehv_pic.c: add missing kfree At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // Signed-off-by: Julia Lawall Acked-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index af1a5df..b6731e4 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -280,6 +280,7 @@ void __init ehv_pic_init(void) if (!ehv_pic->irqhost) { of_node_put(np); + kfree(ehv_pic); return; } -- cgit v0.10.2 From 85d096db6764fd89cea232cf64b65a5f3b0f1ffc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: rename defconfig files appropriately rename all Atmel reference board as soc defconfig Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig new file mode 100644 index 0000000..ffb1edd --- /dev/null +++ b/arch/arm/configs/at91cap9_defconfig @@ -0,0 +1,115 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91CAP9=y +CONFIG_MACH_AT91CAP9ADK=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig deleted file mode 100644 index ffb1edd..0000000 --- a/arch/arm/configs/at91cap9adk_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig new file mode 100644 index 0000000..f8a9226 --- /dev/null +++ b/arch/arm/configs/at91sam9260_defconfig @@ -0,0 +1,83 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig deleted file mode 100644 index f8a9226..0000000 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ /dev/null @@ -1,83 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig new file mode 100644 index 0000000..9e90e6d --- /dev/null +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -0,0 +1,123 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G20=y +CONFIG_MACH_AT91SAM9G20EK=y +CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_HW_RANDOM=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_SPIDEV=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SND_AT73C213=y +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig deleted file mode 100644 index 9e90e6d..0000000 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_AT91SAM9G20EK=y -CONFIG_MACH_AT91SAM9G20EK_2MMC=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig new file mode 100644 index 0000000..75621e4 --- /dev/null +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -0,0 +1,84 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9RL=y +CONFIG_MACH_AT91SAM9RLEK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=24576 +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig deleted file mode 100644 index 75621e4..0000000 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ /dev/null @@ -1,84 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9RL=y -CONFIG_MACH_AT91SAM9RLEK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -- cgit v0.10.2 From 9f939adeb2d0bcc079a8b2684761b34709d65407 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:07:20 +0800 Subject: ARM: at91: refresh soc defconfig files for 3.2 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig index ffb1edd..8826eb2 100644 --- a/arch/arm/configs/at91cap9_defconfig +++ b/arch/arm/configs/at91cap9_defconfig @@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set @@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 38cb7c9..bbe4e1a 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -56,7 +55,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_LEGACY=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m +CONFIG_ARM_AT91_ETHER=y CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_PPP=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=y +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 @@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y @@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index f8a9226..8a4c22d 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -33,12 +33,10 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -55,7 +53,6 @@ CONFIG_I2C_GPIO=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -71,7 +68,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9e90e6d..23966c6 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -23,7 +23,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,8 +36,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -48,17 +45,13 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -66,15 +59,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 CONFIG_HW_RANDOM=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -82,7 +74,6 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -105,7 +96,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index c5876d2..7f8f999 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -73,11 +73,8 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_DAVICOM_PHY=y CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AT76C50X_USB=m @@ -131,7 +128,6 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_FB_UDL=m diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 75621e4..ad562ee 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -23,8 +23,6 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_MMC=y CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -- cgit v0.10.2 From db5509f0c2b7e7c02e1294a10a4d4b04f2720c28 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 16 Oct 2011 00:03:17 +0800 Subject: ARM: at91: enable additional boards in existing soc defconfig files Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 8a4c22d..505b376 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9260=y +CONFIG_ARCH_AT91SAM9260_SAM9XE=y CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 23966c6..9123568 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_MACH_CPU9G20=y +CONFIG_MACH_ACMENETUSFOXG20=y +CONFIG_MACH_PORTUXG20=y +CONFIG_MACH_STAMP9G20=y +CONFIG_MACH_PCONTROL_G20=y +CONFIG_MACH_GSIA18S=y +CONFIG_MACH_USB_A9G20=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -21,6 +30,8 @@ CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 7f8f999..606d48f 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y -- cgit v0.10.2 From 884a45d964dd395eda945842afff5e16bcaedf56 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 22 Nov 2011 07:44:47 -0800 Subject: cgroup_freezer: fix freezing groups with stopped tasks 2d3cbf8b (cgroup_freezer: update_freezer_state() does incorrect state transitions) removed is_task_frozen_enough and replaced it with a simple frozen call. This, however, breaks freezing for a group with stopped tasks because those cannot be frozen and so the group remains in CGROUP_FREEZING state (update_if_frozen doesn't count stopped tasks) and never reaches CGROUP_FROZEN. Let's add is_task_frozen_enough back and use it at the original locations (update_if_frozen and try_to_freeze_cgroup). Semantically we consider stopped tasks as frozen enough so we should consider both cases when testing frozen tasks. Testcase: mkdir /dev/freezer mount -t cgroup -o freezer none /dev/freezer mkdir /dev/freezer/foo sleep 1h & pid=$! kill -STOP $pid echo $pid > /dev/freezer/foo/tasks echo FROZEN > /dev/freezer/foo/freezer.state while true do cat /dev/freezer/foo/freezer.state [ "`cat /dev/freezer/foo/freezer.state`" = "FROZEN" ] && break sleep 1 done echo OK Signed-off-by: Michal Hocko Acked-by: Li Zefan Cc: Tomasz Buchert Cc: Paul Menage Cc: Andrew Morton Cc: stable@kernel.org Signed-off-by: Tejun Heo diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 5e828a2..213c035 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -153,6 +153,13 @@ static void freezer_destroy(struct cgroup_subsys *ss, kfree(cgroup_freezer(cgroup)); } +/* task is frozen or will freeze immediately when next it gets woken */ +static bool is_task_frozen_enough(struct task_struct *task) +{ + return frozen(task) || + (task_is_stopped_or_traced(task) && freezing(task)); +} + /* * The call to cgroup_lock() in the freezer.state write method prevents * a write to that file racing against an attach, and hence the @@ -231,7 +238,7 @@ static void update_if_frozen(struct cgroup *cgroup, cgroup_iter_start(cgroup, &it); while ((task = cgroup_iter_next(cgroup, &it))) { ntotal++; - if (frozen(task)) + if (is_task_frozen_enough(task)) nfrozen++; } @@ -284,7 +291,7 @@ static int try_to_freeze_cgroup(struct cgroup *cgroup, struct freezer *freezer) while ((task = cgroup_iter_next(cgroup, &it))) { if (!freeze_task(task, true)) continue; - if (frozen(task)) + if (is_task_frozen_enough(task)) continue; if (!freezing(task) && !freezer_should_skip(task)) num_cant_freeze_now++; -- cgit v0.10.2 From 13020be8be2d5843c3810169cdbcc51f07ff020f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 24 Nov 2011 09:40:07 +0000 Subject: powerpc: Fix compiliation with hugetlbfs enabled arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 5964371..8558b57 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 49e44064d7e3f24f874a51dd513b83ef9994aa8a Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 22 Nov 2011 13:50:46 +0000 Subject: powerpc/44x: Add mtd ndfc to the ppx44x defconfig Signed-off-by: Tony Breeds Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 6cdf1c0..3b98d73 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_NDFC=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_PROC_DEVICETREE=y -- cgit v0.10.2 From 4c81f045c0bd2cbb78cc6446a4cd98038fe11a2e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 24 Nov 2011 19:22:24 -0500 Subject: ext4: fix racy use-after-free in ext4_end_io_dio() ext4_end_io_dio() queues io_end->work and then clears iocb->private; however, io_end->work calls aio_complete() which frees the iocb object. If that slab object gets reallocated, then ext4_end_io_dio() can end up clearing someone else's iocb->private, this use-after-free can cause a leak of a struct ext4_io_end_t structure. Detected and tested with slab poisoning. [ Note: Can also reproduce using 12 fio's against 12 file systems with the following configuration file: [global] direct=1 ioengine=libaio iodepth=1 bs=4k ba=4k size=128m [create] filename=${TESTDIR} rw=write -- tytso ] Google-Bug-Id: 5354697 Signed-off-by: Tejun Heo Signed-off-by: "Theodore Ts'o" Reported-by: Kent Overstreet Tested-by: Kent Overstreet Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index fffec40..848f436 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2807,8 +2807,8 @@ out: spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); /* queue the work to convert unwritten extents to written */ - queue_work(wq, &io_end->work); iocb->private = NULL; + queue_work(wq, &io_end->work); /* XXX: probably should move into the real I/O completion handler */ inode_dio_done(inode); -- cgit v0.10.2 From 42ca0203fd59aa9be7b241be1fbc3bef1f903f9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Nov 2011 21:18:20 +0000 Subject: net/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add() This was copy and pasted from the IPv4 code. We're calling the ip4 version of that function and map4 is NULL. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 9c24de1..7b372a7 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -162,8 +162,8 @@ int netlbl_cfg_unlbl_map_add(const char *domain, map6->list.addr.s6_addr32[3] &= mask6->s6_addr32[3]; ipv6_addr_copy(&map6->list.mask, mask6); map6->list.valid = 1; - ret_val = netlbl_af4list_add(&map4->list, - &addrmap->list4); + ret_val = netlbl_af6list_add(&map6->list, + &addrmap->list6); if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; -- cgit v0.10.2 From ae95757a9065d89be7c1ca613b53163dd30858b7 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Fri, 25 Nov 2011 09:41:25 +0100 Subject: loop: fix loop block driver discard and encryption comment The loop driver does not support discard if encryption is enabled, fix the comment. Signed-off-by: Dave Young Signed-off-by: Jens Axboe diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 68b205a..5579fda 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -422,7 +422,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) /* * We use punch hole to reclaim the free space used by the - * image a.k.a. discard. However we do support discard if + * image a.k.a. discard. However we do not support discard if * encryption is enabled, because it may give an attacker * useful information. */ -- cgit v0.10.2 From b52fabca369f433999837b73031bdd34feb6fca2 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 24 Nov 2011 10:29:14 -0500 Subject: hwmon: Remove redundant spi driver bus initialization In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // Signed-off-by: Lars-Peter Clausen Cc: Jean Delvare Cc: Guenter Roeck Cc: lm-sensors@lm-sensors.org Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index 318e38e..5d760f3 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -160,7 +160,6 @@ MODULE_DEVICE_TABLE(spi, ad7314_id); static struct spi_driver ad7314_driver = { .driver = { .name = "ad7314", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, .probe = ad7314_probe, diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c index 5231934..04450f8 100644 --- a/drivers/hwmon/ads7871.c +++ b/drivers/hwmon/ads7871.c @@ -227,7 +227,6 @@ static int __devexit ads7871_remove(struct spi_device *spi) static struct spi_driver ads7871_driver = { .driver = { .name = DEVICE_NAME, - .bus = &spi_bus_type, .owner = THIS_MODULE, }, -- cgit v0.10.2 From df07a94cf50eb73d09bf2350c3fe2598e4cbeee1 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Fri, 25 Nov 2011 13:24:49 -0500 Subject: netns: fix proxy ARP entries listing on a netns Skip entries from foreign network namespaces. Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: David S. Miller diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 039d51e..5ac07d3 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2397,7 +2397,10 @@ static struct pneigh_entry *pneigh_get_next(struct seq_file *seq, struct net *net = seq_file_net(seq); struct neigh_table *tbl = state->tbl; - pn = pn->next; + do { + pn = pn->next; + } while (pn && !net_eq(pneigh_net(pn), net)); + while (!pn) { if (++state->bucket > PNEIGH_HASHMASK) break; -- cgit v0.10.2 From 25a236a5dba47a16affb105525cfd75eaa03ceea Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Nov 2011 02:31:00 -0500 Subject: hwmon: convert drivers/hwmon/* to use module_platform_driver() This patch converts the drivers in drivers/hwmon/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Donggeun Kim Cc: Simon Guinot Cc: Lars-Peter Clausen Cc: MyungJoo Ham Cc: Ben Dooks Cc: Hans de Goede Cc: J Keerthy Cc: David S. Miller Cc: Mark Brown Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c index faa0884..f2359a0 100644 --- a/drivers/hwmon/exynos4_tmu.c +++ b/drivers/hwmon/exynos4_tmu.c @@ -506,17 +506,7 @@ static struct platform_driver exynos4_tmu_driver = { .resume = exynos4_tmu_resume, }; -static int __init exynos4_tmu_driver_init(void) -{ - return platform_driver_register(&exynos4_tmu_driver); -} -module_init(exynos4_tmu_driver_init); - -static void __exit exynos4_tmu_driver_exit(void) -{ - platform_driver_unregister(&exynos4_tmu_driver); -} -module_exit(exynos4_tmu_driver_exit); +module_platform_driver(exynos4_tmu_driver); MODULE_DESCRIPTION("EXYNOS4 TMU Driver"); MODULE_AUTHOR("Donggeun Kim "); diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 89aa9fb..9ba38f3 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -539,18 +539,7 @@ static struct platform_driver gpio_fan_driver = { }, }; -static int __init gpio_fan_init(void) -{ - return platform_driver_register(&gpio_fan_driver); -} - -static void __exit gpio_fan_exit(void) -{ - platform_driver_unregister(&gpio_fan_driver); -} - -module_init(gpio_fan_init); -module_exit(gpio_fan_exit); +module_platform_driver(gpio_fan_driver); MODULE_AUTHOR("Simon Guinot "); MODULE_DESCRIPTION("GPIO FAN driver"); diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index fea292d..7a48b1e 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -212,17 +212,7 @@ struct platform_driver jz4740_hwmon_driver = { }, }; -static int __init jz4740_hwmon_init(void) -{ - return platform_driver_register(&jz4740_hwmon_driver); -} -module_init(jz4740_hwmon_init); - -static void __exit jz4740_hwmon_exit(void) -{ - platform_driver_unregister(&jz4740_hwmon_driver); -} -module_exit(jz4740_hwmon_exit); +module_platform_driver(jz4740_hwmon_driver); MODULE_DESCRIPTION("JZ4740 SoC HWMON driver"); MODULE_AUTHOR("Lars-Peter Clausen "); diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index eab1161..9b382ec 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -432,19 +432,7 @@ static struct platform_driver ntc_thermistor_driver = { .id_table = ntc_thermistor_id, }; -static int __init ntc_thermistor_init(void) -{ - return platform_driver_register(&ntc_thermistor_driver); -} - -module_init(ntc_thermistor_init); - -static void __exit ntc_thermistor_cleanup(void) -{ - platform_driver_unregister(&ntc_thermistor_driver); -} - -module_exit(ntc_thermistor_cleanup); +module_platform_driver(ntc_thermistor_driver); MODULE_DESCRIPTION("NTC Thermistor Driver"); MODULE_AUTHOR("MyungJoo Ham "); diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index b39f52e..f6c26d1 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -393,18 +393,7 @@ static struct platform_driver s3c_hwmon_driver = { .remove = __devexit_p(s3c_hwmon_remove), }; -static int __init s3c_hwmon_init(void) -{ - return platform_driver_register(&s3c_hwmon_driver); -} - -static void __exit s3c_hwmon_exit(void) -{ - platform_driver_unregister(&s3c_hwmon_driver); -} - -module_init(s3c_hwmon_init); -module_exit(s3c_hwmon_exit); +module_platform_driver(s3c_hwmon_driver); MODULE_AUTHOR("Ben Dooks "); MODULE_DESCRIPTION("S3C ADC HWMon driver"); diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index e3b5c60..79b6dab 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -590,19 +590,8 @@ static struct platform_driver sch5627_driver = { .remove = sch5627_remove, }; -static int __init sch5627_init(void) -{ - return platform_driver_register(&sch5627_driver); -} - -static void __exit sch5627_exit(void) -{ - platform_driver_unregister(&sch5627_driver); -} +module_platform_driver(sch5627_driver); MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); MODULE_AUTHOR("Hans de Goede "); MODULE_LICENSE("GPL"); - -module_init(sch5627_init); -module_exit(sch5627_exit); diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c index 244407a..9d5236f 100644 --- a/drivers/hwmon/sch5636.c +++ b/drivers/hwmon/sch5636.c @@ -521,19 +521,8 @@ static struct platform_driver sch5636_driver = { .remove = sch5636_remove, }; -static int __init sch5636_init(void) -{ - return platform_driver_register(&sch5636_driver); -} - -static void __exit sch5636_exit(void) -{ - platform_driver_unregister(&sch5636_driver); -} +module_platform_driver(sch5636_driver); MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver"); MODULE_AUTHOR("Hans de Goede "); MODULE_LICENSE("GPL"); - -module_init(sch5636_init); -module_exit(sch5636_exit); diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index 5724074..0018c7d 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -136,19 +136,7 @@ static struct platform_driver twl4030_madc_hwmon_driver = { }, }; -static int __init twl4030_madc_hwmon_init(void) -{ - return platform_driver_register(&twl4030_madc_hwmon_driver); -} - -module_init(twl4030_madc_hwmon_init); - -static void __exit twl4030_madc_hwmon_exit(void) -{ - platform_driver_unregister(&twl4030_madc_hwmon_driver); -} - -module_exit(twl4030_madc_hwmon_exit); +module_platform_driver(twl4030_madc_hwmon_driver); MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c index 3cd07bf..b9a87e8 100644 --- a/drivers/hwmon/ultra45_env.c +++ b/drivers/hwmon/ultra45_env.c @@ -309,15 +309,4 @@ static struct platform_driver env_driver = { .remove = __devexit_p(env_remove), }; -static int __init env_init(void) -{ - return platform_driver_register(&env_driver); -} - -static void __exit env_exit(void) -{ - platform_driver_unregister(&env_driver); -} - -module_init(env_init); -module_exit(env_exit); +module_platform_driver(env_driver); diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c index 97b1f83..9b598ed 100644 --- a/drivers/hwmon/wm831x-hwmon.c +++ b/drivers/hwmon/wm831x-hwmon.c @@ -209,17 +209,7 @@ static struct platform_driver wm831x_hwmon_driver = { }, }; -static int __init wm831x_hwmon_init(void) -{ - return platform_driver_register(&wm831x_hwmon_driver); -} -module_init(wm831x_hwmon_init); - -static void __exit wm831x_hwmon_exit(void) -{ - platform_driver_unregister(&wm831x_hwmon_driver); -} -module_exit(wm831x_hwmon_exit); +module_platform_driver(wm831x_hwmon_driver); MODULE_AUTHOR("Mark Brown "); MODULE_DESCRIPTION("WM831x Hardware Monitoring"); diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c index 1329059..3ff67ed 100644 --- a/drivers/hwmon/wm8350-hwmon.c +++ b/drivers/hwmon/wm8350-hwmon.c @@ -133,17 +133,7 @@ static struct platform_driver wm8350_hwmon_driver = { }, }; -static int __init wm8350_hwmon_init(void) -{ - return platform_driver_register(&wm8350_hwmon_driver); -} -module_init(wm8350_hwmon_init); - -static void __exit wm8350_hwmon_exit(void) -{ - platform_driver_unregister(&wm8350_hwmon_driver); -} -module_exit(wm8350_hwmon_exit); +module_platform_driver(wm8350_hwmon_driver); MODULE_AUTHOR("Mark Brown "); MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); -- cgit v0.10.2 From 6b600b26c0215bf9ed04062ecfacf0bc20e2588c Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:12:13 +0000 Subject: route: Use the device mtu as the default for blackhole routes As it is, we return null as the default mtu of blackhole routes. This may lead to a propagation of a bogus pmtu if the default_mtu method of a blackhole route is invoked. So return dst->dev->mtu as the default mtu instead. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 0c74da8..5b17bf1 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2757,7 +2757,7 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst) { - return 0; + return dst->dev->mtu; } static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8473016..d8fbd18 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -157,7 +157,7 @@ static struct dst_ops ip6_dst_ops_template = { static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst) { - return 0; + return dst->dev->mtu; } static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) -- cgit v0.10.2 From ebb762f27fed083cb993a0816393aba4615f6544 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:12:51 +0000 Subject: net: Rename the dst_opt default_mtu method to mtu We plan to invoke the dst_opt->default_mtu() method unconditioally from dst_mtu(). So rename the method to dst_opt->mtu() to match the name with the new meaning. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/include/net/dst.h b/include/net/dst.h index 4fb6c43..666de31 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -208,7 +208,7 @@ static inline u32 dst_mtu(const struct dst_entry *dst) u32 mtu = dst_metric_raw(dst, RTAX_MTU); if (!mtu) - mtu = dst->ops->default_mtu(dst); + mtu = dst->ops->mtu(dst); return mtu; } diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 9adb998..e1c2ee0 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -17,7 +17,7 @@ struct dst_ops { int (*gc)(struct dst_ops *ops); struct dst_entry * (*check)(struct dst_entry *, __u32 cookie); unsigned int (*default_advmss)(const struct dst_entry *); - unsigned int (*default_mtu)(const struct dst_entry *); + unsigned int (*mtu)(const struct dst_entry *); u32 * (*cow_metrics)(struct dst_entry *, unsigned long); void (*destroy)(struct dst_entry *); void (*ifdown)(struct dst_entry *, diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index a77d161..db48679 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -112,7 +112,7 @@ static unsigned long dn_rt_deadline; static int dn_dst_gc(struct dst_ops *ops); static struct dst_entry *dn_dst_check(struct dst_entry *, __u32); static unsigned int dn_dst_default_advmss(const struct dst_entry *dst); -static unsigned int dn_dst_default_mtu(const struct dst_entry *dst); +static unsigned int dn_dst_mtu(const struct dst_entry *dst); static void dn_dst_destroy(struct dst_entry *); static struct dst_entry *dn_dst_negative_advice(struct dst_entry *); static void dn_dst_link_failure(struct sk_buff *); @@ -135,7 +135,7 @@ static struct dst_ops dn_dst_ops = { .gc = dn_dst_gc, .check = dn_dst_check, .default_advmss = dn_dst_default_advmss, - .default_mtu = dn_dst_default_mtu, + .mtu = dn_dst_mtu, .cow_metrics = dst_cow_metrics_generic, .destroy = dn_dst_destroy, .negative_advice = dn_dst_negative_advice, @@ -825,7 +825,7 @@ static unsigned int dn_dst_default_advmss(const struct dst_entry *dst) return dn_mss_from_pmtu(dst->dev, dst_mtu(dst)); } -static unsigned int dn_dst_default_mtu(const struct dst_entry *dst) +static unsigned int dn_dst_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 5b17bf1..f1ac3ef 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -138,7 +138,7 @@ static int rt_chain_length_max __read_mostly = 20; static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ipv4_default_advmss(const struct dst_entry *dst); -static unsigned int ipv4_default_mtu(const struct dst_entry *dst); +static unsigned int ipv4_mtu(const struct dst_entry *dst); static void ipv4_dst_destroy(struct dst_entry *dst); static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst); static void ipv4_link_failure(struct sk_buff *skb); @@ -193,7 +193,7 @@ static struct dst_ops ipv4_dst_ops = { .gc = rt_garbage_collect, .check = ipv4_dst_check, .default_advmss = ipv4_default_advmss, - .default_mtu = ipv4_default_mtu, + .mtu = ipv4_mtu, .cow_metrics = ipv4_cow_metrics, .destroy = ipv4_dst_destroy, .ifdown = ipv4_dst_ifdown, @@ -1814,7 +1814,7 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) return advmss; } -static unsigned int ipv4_default_mtu(const struct dst_entry *dst) +static unsigned int ipv4_mtu(const struct dst_entry *dst) { unsigned int mtu = dst->dev->mtu; @@ -2755,7 +2755,7 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo return NULL; } -static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst) +static unsigned int ipv4_blackhole_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } @@ -2775,7 +2775,7 @@ static struct dst_ops ipv4_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IP), .destroy = ipv4_dst_destroy, .check = ipv4_blackhole_dst_check, - .default_mtu = ipv4_blackhole_default_mtu, + .mtu = ipv4_blackhole_mtu, .default_advmss = ipv4_default_advmss, .update_pmtu = ipv4_rt_blackhole_update_pmtu, .cow_metrics = ipv4_rt_blackhole_cow_metrics, diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d8fbd18..76645d7 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -77,7 +77,7 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, const struct in6_addr *dest); static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); -static unsigned int ip6_default_mtu(const struct dst_entry *dst); +static unsigned int ip6_mtu(const struct dst_entry *dst); static struct dst_entry *ip6_negative_advice(struct dst_entry *); static void ip6_dst_destroy(struct dst_entry *); static void ip6_dst_ifdown(struct dst_entry *, @@ -144,7 +144,7 @@ static struct dst_ops ip6_dst_ops_template = { .gc_thresh = 1024, .check = ip6_dst_check, .default_advmss = ip6_default_advmss, - .default_mtu = ip6_default_mtu, + .mtu = ip6_mtu, .cow_metrics = ipv6_cow_metrics, .destroy = ip6_dst_destroy, .ifdown = ip6_dst_ifdown, @@ -155,7 +155,7 @@ static struct dst_ops ip6_dst_ops_template = { .neigh_lookup = ip6_neigh_lookup, }; -static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst) +static unsigned int ip6_blackhole_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } @@ -175,7 +175,7 @@ static struct dst_ops ip6_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IPV6), .destroy = ip6_dst_destroy, .check = ip6_dst_check, - .default_mtu = ip6_blackhole_default_mtu, + .mtu = ip6_blackhole_mtu, .default_advmss = ip6_default_advmss, .update_pmtu = ip6_rt_blackhole_update_pmtu, .cow_metrics = ip6_rt_blackhole_cow_metrics, @@ -1041,7 +1041,7 @@ static unsigned int ip6_default_advmss(const struct dst_entry *dst) return mtu; } -static unsigned int ip6_default_mtu(const struct dst_entry *dst) +static unsigned int ip6_mtu(const struct dst_entry *dst) { unsigned int mtu = IPV6_MIN_MTU; struct inet6_dev *idev; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 552df27..b8be51e 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2382,7 +2382,7 @@ static unsigned int xfrm_default_advmss(const struct dst_entry *dst) return dst_metric_advmss(dst->path); } -static unsigned int xfrm_default_mtu(const struct dst_entry *dst) +static unsigned int xfrm_mtu(const struct dst_entry *dst) { return dst_mtu(dst->path); } @@ -2411,8 +2411,8 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) dst_ops->check = xfrm_dst_check; if (likely(dst_ops->default_advmss == NULL)) dst_ops->default_advmss = xfrm_default_advmss; - if (likely(dst_ops->default_mtu == NULL)) - dst_ops->default_mtu = xfrm_default_mtu; + if (likely(dst_ops->mtu == NULL)) + dst_ops->mtu = xfrm_mtu; if (likely(dst_ops->negative_advice == NULL)) dst_ops->negative_advice = xfrm_negative_advice; if (likely(dst_ops->link_failure == NULL)) -- cgit v0.10.2 From 618f9bc74a039da76fa027ac2600c5b785b964c5 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:13:31 +0000 Subject: net: Move mtu handling down to the protocol depended handlers We move all mtu handling from dst_mtu() down to the protocol layer. So each protocol can implement the mtu handling in a different manner. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/include/net/dst.h b/include/net/dst.h index 666de31..6faec1a 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -205,12 +205,7 @@ dst_feature(const struct dst_entry *dst, u32 feature) static inline u32 dst_mtu(const struct dst_entry *dst) { - u32 mtu = dst_metric_raw(dst, RTAX_MTU); - - if (!mtu) - mtu = dst->ops->mtu(dst); - - return mtu; + return dst->ops->mtu(dst); } /* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */ diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index db48679..94f4ec0 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -827,7 +827,9 @@ static unsigned int dn_dst_default_advmss(const struct dst_entry *dst) static unsigned int dn_dst_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst, const void *daddr) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f1ac3ef..11d1b20 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1816,7 +1816,12 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) static unsigned int ipv4_mtu(const struct dst_entry *dst) { - unsigned int mtu = dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + if (mtu) + return mtu; + + mtu = dst->dev->mtu; if (unlikely(dst_metric_locked(dst, RTAX_MTU))) { const struct rtable *rt = (const struct rtable *) dst; @@ -2757,7 +2762,9 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo static unsigned int ipv4_blackhole_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 76645d7..3399dd3 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -157,7 +157,9 @@ static struct dst_ops ip6_dst_ops_template = { static unsigned int ip6_blackhole_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) @@ -1043,8 +1045,13 @@ static unsigned int ip6_default_advmss(const struct dst_entry *dst) static unsigned int ip6_mtu(const struct dst_entry *dst) { - unsigned int mtu = IPV6_MIN_MTU; struct inet6_dev *idev; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + if (mtu) + return mtu; + + mtu = IPV6_MIN_MTU; rcu_read_lock(); idev = __in6_dev_get(dst->dev); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index b8be51e..2118d64 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2384,7 +2384,9 @@ static unsigned int xfrm_default_advmss(const struct dst_entry *dst) static unsigned int xfrm_mtu(const struct dst_entry *dst) { - return dst_mtu(dst->path); + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst_mtu(dst->path); } static struct neighbour *xfrm_neigh_lookup(const struct dst_entry *dst, const void *daddr) -- cgit v0.10.2 From b8400f3718a11c9b0ca400705cddf94f3132c1c3 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:14:15 +0000 Subject: route: struct rtable can be const in rt_is_input_route and rt_is_output_route Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/include/net/route.h b/include/net/route.h index db7b343..91855d1 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -71,12 +71,12 @@ struct rtable { struct fib_info *fi; /* for client ref to shared metrics */ }; -static inline bool rt_is_input_route(struct rtable *rt) +static inline bool rt_is_input_route(const struct rtable *rt) { return rt->rt_route_iif != 0; } -static inline bool rt_is_output_route(struct rtable *rt) +static inline bool rt_is_output_route(const struct rtable *rt) { return rt->rt_route_iif == 0; } -- cgit v0.10.2 From 261663b0ee2ee8e3947f4c11c1a08be18cd2cea1 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:14:50 +0000 Subject: ipv4: Don't use the cached pmtu informations for input routes The pmtu informations on the inetpeer are visible for output and input routes. On packet forwarding, we might propagate a learned pmtu to the sender. As we update the pmtu informations of the inetpeer on demand, the original sender of the forwarded packets might never notice when the pmtu to that inetpeer increases. So use the mtu of the outgoing device on packet forwarding instead of the pmtu to the final destination. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 11d1b20..fb47c8f 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1816,15 +1816,15 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) static unsigned int ipv4_mtu(const struct dst_entry *dst) { + const struct rtable *rt = (const struct rtable *) dst; unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); - if (mtu) + if (mtu && rt_is_output_route(rt)) return mtu; mtu = dst->dev->mtu; if (unlikely(dst_metric_locked(dst, RTAX_MTU))) { - const struct rtable *rt = (const struct rtable *) dst; if (rt->rt_gateway != rt->rt_dst && mtu > 576) mtu = 576; -- cgit v0.10.2 From fc0b927d9a5024e138c4318fe19a590f23e3eeec Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 25 Nov 2011 14:40:02 +0000 Subject: net: Revert ARCNET and PHYLIB to tristate options commit 88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig & Makefile cleanup") changed the type of these options to bool, but they select code that could (and still can) be built as modules. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index a73d9dc..84fb634 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCNET depends on NETDEVICES && (ISA || PCI || PCMCIA) - bool "ARCnet support" + tristate "ARCnet support" ---help--- If you have a network card of this type, say Y and check out the (arguably) beautiful poetry in diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index bb88e12..a702443 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -3,7 +3,7 @@ # menuconfig PHYLIB - bool "PHY Device support and infrastructure" + tristate "PHY Device support and infrastructure" depends on !S390 depends on NETDEVICES help -- cgit v0.10.2 From 8a6e77d5209e459a9ec5c268c39800c06cd1dc86 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 21 Nov 2011 00:21:55 +0000 Subject: decnet: proper socket refcounting Better use sk_reset_timer() / sk_stop_timer() helpers to make sure we dont access already freed/reused memory later. Reported-by: Sasha Levin Signed-off-by: Eric Dumazet Tested-by: Sasha Levin Signed-off-by: David S. Miller diff --git a/net/decnet/dn_timer.c b/net/decnet/dn_timer.c index 67f691b..d9c150c 100644 --- a/net/decnet/dn_timer.c +++ b/net/decnet/dn_timer.c @@ -36,16 +36,13 @@ static void dn_slow_timer(unsigned long arg); void dn_start_slow_timer(struct sock *sk) { - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - sk->sk_timer.function = dn_slow_timer; - sk->sk_timer.data = (unsigned long)sk; - - add_timer(&sk->sk_timer); + setup_timer(&sk->sk_timer, dn_slow_timer, (unsigned long)sk); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); } void dn_stop_slow_timer(struct sock *sk) { - del_timer(&sk->sk_timer); + sk_stop_timer(sk, &sk->sk_timer); } static void dn_slow_timer(unsigned long arg) @@ -53,12 +50,10 @@ static void dn_slow_timer(unsigned long arg) struct sock *sk = (struct sock *)arg; struct dn_scp *scp = DN_SK(sk); - sock_hold(sk); bh_lock_sock(sk); if (sock_owned_by_user(sk)) { - sk->sk_timer.expires = jiffies + HZ / 10; - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + HZ / 10); goto out; } @@ -100,9 +95,7 @@ static void dn_slow_timer(unsigned long arg) scp->keepalive_fxn(sk); } - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); out: bh_unlock_sock(sk); sock_put(sk); -- cgit v0.10.2 From 71b1391a41289735676be02e35239e5aa9fe6ba6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 25 Nov 2011 06:47:16 +0000 Subject: l2tp: ensure sk->dst is still valid When using l2tp over ipsec, the tunnel will hang when rekeying occurs. Reason is that the transformer bundle attached to the dst entry is now in STATE_DEAD and thus xfrm_output_one() drops all packets (XfrmOutStateExpired increases). Fix this by calling __sk_dst_check (which drops the stale dst if xfrm dst->check callback finds that the bundle is no longer valid). Cc: James Chapman Signed-off-by: Florian Westphal Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index cf0f308..89ff8c6 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1072,7 +1072,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len /* Get routing info from the tunnel socket */ skb_dst_drop(skb); - skb_dst_set(skb, dst_clone(__sk_dst_get(sk))); + skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0))); inet = inet_sk(sk); fl = &inet->cork.fl; -- cgit v0.10.2 From 83b98fb46ff136945f9d06a9bf6e6aae2ffc37b3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 07:51:56 +0000 Subject: dm9000: Fix check for disabled wake on LAN We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 438f458..2a22f52 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -613,7 +613,7 @@ static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w) if (!dm->wake_state) irq_set_irq_wake(dm->irq_wake, 1); - else if (dm->wake_state & !opts) + else if (dm->wake_state && !opts) irq_set_irq_wake(dm->irq_wake, 0); } -- cgit v0.10.2 From aaa0b4f00729d5530b7d983930e60255574b347b Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Fri, 25 Nov 2011 10:56:22 +0000 Subject: iio: iio_event_getfd -- fix ev_int build failure Fix build failure in staging iio driver: .../drivers/staging/iio/industrialio-core.c: In function 'iio_event_getfd': .../drivers/staging/iio/industrialio-core.c:262:32: error: 'ev_int' undeclared (first use in this function) Also convert the rest of the function to use the new variable. Signed-off-by: Andy Whitcroft Signed-off-by: Linus Torvalds diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c index 2656409..aec9311 100644 --- a/drivers/staging/iio/industrialio-core.c +++ b/drivers/staging/iio/industrialio-core.c @@ -242,25 +242,24 @@ static const struct file_operations iio_event_chrdev_fileops = { static int iio_event_getfd(struct iio_dev *indio_dev) { + struct iio_event_interface *ev_int = indio_dev->event_interface; int fd; - if (indio_dev->event_interface == NULL) + if (ev_int == NULL) return -ENODEV; - mutex_lock(&indio_dev->event_interface->event_list_lock); - if (test_and_set_bit(IIO_BUSY_BIT_POS, - &indio_dev->event_interface->flags)) { - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_lock(&ev_int->event_list_lock); + if (test_and_set_bit(IIO_BUSY_BIT_POS, &ev_int->flags)) { + mutex_unlock(&ev_int->event_list_lock); return -EBUSY; } - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_unlock(&ev_int->event_list_lock); fd = anon_inode_getfd("iio:event", - &iio_event_chrdev_fileops, - indio_dev->event_interface, O_RDONLY); + &iio_event_chrdev_fileops, ev_int, O_RDONLY); if (fd < 0) { - mutex_lock(&indio_dev->event_interface->event_list_lock); + mutex_lock(&ev_int->event_list_lock); clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags); - mutex_unlock(&indio_dev->event_interface->event_list_lock); + mutex_unlock(&ev_int->event_list_lock); } return fd; } -- cgit v0.10.2 From 0884d7aa24e15e72b3c07f7da910a13bb7df3592 Mon Sep 17 00:00:00 2001 From: Alexey Moiseytsev Date: Mon, 21 Nov 2011 13:35:25 +0000 Subject: AF_UNIX: Fix poll blocking problem when reading from a stream socket poll() call may be blocked by concurrent reading from the same stream socket. Signed-off-by: Alexey Moiseytsev Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 466fbcc..b595a3d 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1957,6 +1957,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, if ((UNIXCB(skb).pid != siocb->scm->pid) || (UNIXCB(skb).cred != siocb->scm->cred)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } else { @@ -1974,6 +1975,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, chunk = min_t(unsigned int, skb->len, size); if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); if (copied == 0) copied = -EFAULT; break; @@ -1991,6 +1993,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put the skb back if we didn't use it up.. */ if (skb->len) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } @@ -2006,6 +2009,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put message back and return */ skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } while (size); -- cgit v0.10.2 From 41dfaa934c5d866d626de9bea785e6168524a47e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 22 Nov 2011 04:01:06 +0100 Subject: ARM: 7168/1: use cache type functions for arch_get_unmapped_area There are already cache type decoding functions, so use those instead of custom decode code which only works for ARMv6. Signed-off-by: Rob Herring Acked-by: Nicolas Pitre Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 74be05f..44b628e 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -9,8 +9,7 @@ #include #include #include -#include -#include +#include #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ @@ -32,25 +31,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long start_addr; -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) - unsigned int cache_type; - int do_align = 0, aliasing = 0; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); /* * We only need to do colour alignment if either the I or D - * caches alias. This is indicated by bits 9 and 21 of the - * cache type register. + * caches alias. */ - cache_type = read_cpuid_cachetype(); - if (cache_type != read_cpuid_id()) { - aliasing = (cache_type | cache_type >> 12) & (1 << 11); - if (aliasing) - do_align = filp || flags & MAP_SHARED; - } -#else -#define do_align 0 -#define aliasing 0 -#endif + if (aliasing) + do_align = filp || (flags & MAP_SHARED); /* * We enforce the MAP_FIXED case. -- cgit v0.10.2 From c89cefed35c8c5f53f36757f8a6768e390394ee3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Nov 2011 23:42:12 +0100 Subject: ARM: 7170/2: fix compilation breakage in entry-armv.S Fix compilation failure, when Thumb support is not enabled: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:501: Error: backward ref to unknown label "2:" arch/arm/kernel/entry-armv.S:502: Error: backward ref to unknown label "3:" make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1 Signed-off-by: Guennadi Liakhovetski Reviewed-by: Dave Martin Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9ad50c4..b145f16 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -497,7 +497,7 @@ ENDPROC(__und_usr) .popsection .pushsection __ex_table,"a" .long 1b, 4b -#if __LINUX_ARM_ARCH__ >= 7 +#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 .long 2b, 4b .long 3b, 4b #endif -- cgit v0.10.2 From c36ef4b1762302a493c6cb754073bded084700e2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 23 Nov 2011 11:28:25 +0100 Subject: ARM: 7171/1: unwind: add unwind directives to bitops assembly macros The bitops functions (e.g. _test_and_set_bit) on ARM do not have unwind annotations and therefore the kernel cannot backtrace out of them on a fatal error (for example, NULL pointer dereference). This patch annotates the bitops assembly macros with UNWIND annotations so that we can produce a meaningful backtrace on error. Callers of the macros are modified to pass their function name as a macro parameter, enforcing that the macros are used as standalone function implementations. Acked-by: Dave Martin Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 10d868a..d6408d1 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,5 +1,9 @@ +#include + #if __LINUX_ARM_ARCH__ >= 6 - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -13,9 +17,13 @@ cmp r0, #0 bne 1b bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 @@ -34,9 +42,13 @@ cmp r0, #0 movne r0, #1 2: bx lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #else - .macro bitop, instr + .macro bitop, name, instr +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r2, r0, #31 @@ -49,6 +61,8 @@ str r2, [r1, r0, lsl #2] restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm /** @@ -59,7 +73,9 @@ * Note: we can trivially conditionalise the store instruction * to avoid dirtying the data cache. */ - .macro testop, instr, store + .macro testop, name, instr, store +ENTRY( \name ) +UNWIND( .fnstart ) ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned and r3, r0, #31 @@ -73,5 +89,7 @@ moveq r0, #0 restore_irqs ip mov pc, lr +UNWIND( .fnend ) +ENDPROC(\name ) .endm #endif diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S index 68ed5b6..f402786 100644 --- a/arch/arm/lib/changebit.S +++ b/arch/arm/lib/changebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_change_bit) - bitop eor -ENDPROC(_change_bit) +bitop _change_bit, eor diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S index 4c04c3b..f6b75fb 100644 --- a/arch/arm/lib/clearbit.S +++ b/arch/arm/lib/clearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_clear_bit) - bitop bic -ENDPROC(_clear_bit) +bitop _clear_bit, bic diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S index bbee5c6..618feda 100644 --- a/arch/arm/lib/setbit.S +++ b/arch/arm/lib/setbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_set_bit) - bitop orr -ENDPROC(_set_bit) +bitop _set_bit, orr diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 15a4d43..4becdc3 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_change_bit) - testop eor, str -ENDPROC(_test_and_change_bit) +testop _test_and_change_bit, eor, str diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 521b66b..918841d 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_clear_bit) - testop bicne, strne -ENDPROC(_test_and_clear_bit) +testop _test_and_clear_bit, bicne, strne diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index 1c98cc2..8d1b2fe 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -12,6 +12,4 @@ #include "bitops.h" .text -ENTRY(_test_and_set_bit) - testop orreq, streq -ENDPROC(_test_and_set_bit) +testop _test_and_set_bit, orreq, streq -- cgit v0.10.2 From ea2e7057c0234cfb8b09467d8f137760d371fc72 Mon Sep 17 00:00:00 2001 From: Sumit Bhattacharya Date: Thu, 24 Nov 2011 00:47:12 +0100 Subject: ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch is ported from arch/avr32 (commit 3611553ef985ef7c5863c8a94641738addd04cff). [swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup] Signed-off-by: Sumit Bhattacharya Tested-by: Varun Colbert Signed-off-by: Stephen Warren Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab58456..1aa664a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -332,6 +332,15 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct page *page; void *addr; + /* + * Following is a work-around (a.k.a. hack) to prevent pages + * with __GFP_COMP being passed to split_page() which cannot + * handle them. The real problem is that this flag probably + * should be 0 on ARM as it is not supported on this + * platform; see CONFIG_HUGETLBFS. + */ + gfp &= ~(__GFP_COMP); + *handle = ~0; size = PAGE_ALIGN(size); -- cgit v0.10.2 From 46589e2922509f9134ce79fa75180886c9765c58 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 24 Nov 2011 13:01:08 +0100 Subject: ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels When compiling kprobes-test-thumb.c an error like below may occur: /tmp/ccKcuJcG.s:19179: Error: offset out of range This is caused by the compiler underestimating the size of the inline assembler instructions containing ".space 0x1000" and failing to spill the literal pool in time to prevent the generation of PC relative load instruction with invalid offsets. The fix implemented by this patch is to replace a single large .space directive by a number of 4 byte .space's. This requires splitting the macros which generate test cases for branch instructions into two forms: one with, and one without support for inserting extra code between branch and target. Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c index 5e726c3..5d8b857 100644 --- a/arch/arm/kernel/kprobes-test-thumb.c +++ b/arch/arm/kernel/kprobes-test-thumb.c @@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void) DONT_TEST_IN_ITBLOCK( TEST_BF_R( "cbnz r",0,0, ", 2f") TEST_BF_R( "cbz r",2,-1,", 2f") - TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20) - TEST_BF_RX( "cbz r",7,0, ", 2f",0x40) + TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20) + TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40) ) TEST_R("sxth r0, r",7, HH1,"") TEST_R("sxth r7, r",0, HH2,"") @@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK( TESTCASE_START(code) \ TEST_ARG_PTR(13, offset) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code,0) \ + TEST_BRANCH_F(code) \ TESTCASE_END TEST("push {r0}") @@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8, TEST_BF( "b 2f") TEST_BB( "b 2b") - TEST_BF_X("b 2f", 0x400) - TEST_BB_X("b 2b", 0x400) + TEST_BF_X("b 2f", SPACE_0x400) + TEST_BB_X("b 2b", SPACE_0x400) TEST_GROUP("Testing instructions in IT blocks") @@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22, TEST_BB("bne.w 2b") TEST_BF("bgt.w 2f") TEST_BB("blt.w 2b") - TEST_BF_X("bpl.w 2f",0x1000) + TEST_BF_X("bpl.w 2f", SPACE_0x1000) ) TEST_UNSUPPORTED("msr cpsr, r0") @@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22, TEST_BF( "b.w 2f") TEST_BB( "b.w 2b") - TEST_BF_X("b.w 2f", 0x1000) + TEST_BF_X("b.w 2f", SPACE_0x1000) TEST_BF( "bl.w 2f") TEST_BB( "bl.w 2b") - TEST_BB_X("bl.w 2b", 0x1000) + TEST_BB_X("bl.w 2b", SPACE_0x1000) TEST_X( "blx __dummy_arm_subroutine", ".arm \n\t" diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h index 0dc5d77..e28a869 100644 --- a/arch/arm/kernel/kprobes-test.h +++ b/arch/arm/kernel/kprobes-test.h @@ -149,23 +149,31 @@ struct test_arg_end { "1: "instruction" \n\t" \ " nop \n\t" -#define TEST_BRANCH_F(instruction, xtra_dist) \ +#define TEST_BRANCH_F(instruction) \ TEST_INSTRUCTION(instruction) \ - ".if "#xtra_dist" \n\t" \ " b 99f \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TEST_BRANCH_FX(instruction, codex) \ + TEST_INSTRUCTION(instruction) \ + " b 99f \n\t" \ + codex" \n\t" \ " b 99f \n\t" \ "2: nop \n\t" -#define TEST_BRANCH_B(instruction, xtra_dist) \ +#define TEST_BRANCH_BX(instruction, codex) \ " b 50f \n\t" \ " b 99f \n\t" \ "2: nop \n\t" \ " b 99f \n\t" \ - ".if "#xtra_dist" \n\t" \ - ".space "#xtra_dist" \n\t" \ - ".endif \n\t" \ + codex" \n\t" \ TEST_INSTRUCTION(instruction) #define TESTCASE_END \ @@ -301,47 +309,60 @@ struct test_arg_end { TESTCASE_START(code1 #reg1 code2) \ TEST_ARG_PTR(reg1, val1) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2, 0) \ + TEST_BRANCH_F(code1 #reg1 code2) \ TESTCASE_END -#define TEST_BF_X(code, xtra_dist) \ +#define TEST_BF(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code, xtra_dist) \ + TEST_BRANCH_F(code) \ TESTCASE_END -#define TEST_BB_X(code, xtra_dist) \ +#define TEST_BB(code) \ TESTCASE_START(code) \ TEST_ARG_END("") \ - TEST_BRANCH_B(code, xtra_dist) \ + TEST_BRANCH_B(code) \ TESTCASE_END -#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg code2, xtra_dist) \ +#define TEST_BF_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2) \ TESTCASE_END -#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \ - TESTCASE_START(code1 #reg code2) \ - TEST_ARG_REG(reg, val) \ - TEST_ARG_END("") \ - TEST_BRANCH_B(code1 #reg code2, xtra_dist) \ +#define TEST_BB_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2) \ TESTCASE_END -#define TEST_BF(code) TEST_BF_X(code, 0) -#define TEST_BB(code) TEST_BB_X(code, 0) - -#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0) -#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0) - #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ TEST_ARG_REG(reg1, val1) \ TEST_ARG_REG(reg2, val2) \ TEST_ARG_END("") \ - TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_BF_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code, codex) \ + TESTCASE_END + +#define TEST_BB_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_BX(code, codex) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code1 #reg code2, codex) \ TESTCASE_END #define TEST_X(code, codex) \ @@ -372,6 +393,25 @@ struct test_arg_end { TESTCASE_END +/* + * Macros for defining space directives spread over multiple lines. + * These are required so the compiler guesses better the length of inline asm + * code and will spill the literal pool early enough to avoid generating PC + * relative loads with out of range offsets. + */ +#define TWICE(x) x x +#define SPACE_0x8 TWICE(".space 4\n\t") +#define SPACE_0x10 TWICE(SPACE_0x8) +#define SPACE_0x20 TWICE(SPACE_0x10) +#define SPACE_0x40 TWICE(SPACE_0x20) +#define SPACE_0x80 TWICE(SPACE_0x40) +#define SPACE_0x100 TWICE(SPACE_0x80) +#define SPACE_0x200 TWICE(SPACE_0x100) +#define SPACE_0x400 TWICE(SPACE_0x200) +#define SPACE_0x800 TWICE(SPACE_0x400) +#define SPACE_0x1000 TWICE(SPACE_0x800) + + /* Various values used in test cases... */ #define N(val) (val ^ 0xffffffff) #define VAL1 0x12345678 -- cgit v0.10.2 From 97371fa99c1900a84a5220639edd726b35d73931 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Nov 2011 00:23:28 +0100 Subject: ARM: 7175/1: add subname parameter to mfp_set_groupg callers commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin Acked-by: Mark Brown Acked-by: Wan Zongshun Signed-off-by: Russell King diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c index 835e47b..03b6157 100644 --- a/drivers/i2c/busses/i2c-nuc900.c +++ b/drivers/i2c/busses/i2c-nuc900.c @@ -593,7 +593,7 @@ static int __devinit nuc900_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - mfp_set_groupg(&pdev->dev); + mfp_set_groupg(&pdev->dev, NULL); clk_get_rate(i2c->clk); diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index e763254..21c70b2 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -426,7 +426,7 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev) goto err_clk; } - mfp_set_groupg(&pdev->dev); + mfp_set_groupg(&pdev->dev, NULL); nuc900_init_spi(hw); err = spi_bitbang_start(&hw->bitbang); diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index 9c0edad..a4e3237 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -365,7 +365,8 @@ static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev) if (ret) goto out3; - mfp_set_groupg(nuc900_audio->dev); /* enbale ac97 multifunction pin*/ + /* enbale ac97 multifunction pin */ + mfp_set_groupg(nuc900_audio->dev, "nuc900-audio"); return 0; -- cgit v0.10.2 From abdd7b91dab2f8b2e32e90e4b7e809ffb462a662 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 25 Nov 2011 17:58:19 +0100 Subject: ARM: 7176/1: cpu_pm: register GIC PM notifier only once When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon Tested-by: Will Deacon Cc: Colin Cross Signed-off-by: Marc Zyngier Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 0e6ae47..43240f3 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic) sizeof(u32)); BUG_ON(!gic->saved_ppi_conf); - cpu_pm_register_notifier(&gic_notifier_block); + if (gic == &gic_data[0]) + cpu_pm_register_notifier(&gic_notifier_block); } #else static void __init gic_pm_init(struct gic_chip_data *gic) -- cgit v0.10.2 From fe41db7b3aca512e19b8ef4fbd5ad55545005d25 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Nov 2011 19:23:36 +0100 Subject: ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 43240f3..410a546 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -582,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ + domain->hwirq_base = 32; if (gic_nr == 0) { gic_cpu_base_addr = cpu_base; - domain->hwirq_base = 16; - if (irq_start > 0) - irq_start = (irq_start & ~31) + 16; - } else - domain->hwirq_base = 32; + + if ((irq_start & 31) > 0) { + domain->hwirq_base = 16; + if (irq_start != -1) + irq_start = (irq_start & ~31) + 16; + } + } /* * Find out how many interrupts are supported. -- cgit v0.10.2 From de68dca1816660b0d3ac89fa59ffb410007a143f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 26 Nov 2011 12:13:44 +0000 Subject: inet: add a redirect generation id in inetpeer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now inetpeer is the place where we cache redirect information for ipv4 destinations, we must be able to invalidate informations when a route is added/removed on host. As inetpeer is not yet namespace aware, this patch adds a shared redirect_genid, and a per inetpeer redirect_genid. This might be changed later if inetpeer becomes ns aware. Cache information for one inerpeer is valid as long as its redirect_genid has the same value than global redirect_genid. Reported-by: Arkadiusz Miśkiewicz Tested-by: Arkadiusz Miśkiewicz Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index 78c83e6..e9ff3fc 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -35,6 +35,7 @@ struct inet_peer { u32 metrics[RTAX_MAX]; u32 rate_tokens; /* rate limiting for ICMP */ + int redirect_genid; unsigned long rate_last; unsigned long pmtu_expires; u32 pmtu_orig; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fb47c8f..5c28472 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -131,6 +131,7 @@ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; static int rt_chain_length_max __read_mostly = 20; +static int redirect_genid; /* * Interface to generic destination cache. @@ -837,6 +838,7 @@ static void rt_cache_invalidate(struct net *net) get_random_bytes(&shuffle, sizeof(shuffle)); atomic_add(shuffle + 1U, &net->ipv4.rt_genid); + redirect_genid++; } /* @@ -1391,8 +1393,10 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, peer = rt->peer; if (peer) { - if (peer->redirect_learned.a4 != new_gw) { + if (peer->redirect_learned.a4 != new_gw || + peer->redirect_genid != redirect_genid) { peer->redirect_learned.a4 = new_gw; + peer->redirect_genid = redirect_genid; atomic_inc(&__rt_peer_genid); } check_peer_redir(&rt->dst, peer); @@ -1701,6 +1705,8 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) if (peer) { check_peer_pmtu(dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { if (check_peer_redir(dst, peer)) @@ -1857,6 +1863,8 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4, dst_init_metrics(&rt->dst, peer->metrics, false); check_peer_pmtu(&rt->dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { rt->rt_gateway = peer->redirect_learned.a4; -- cgit v0.10.2 From 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 Mon Sep 17 00:00:00 2001 From: Bart Westgeest Date: Tue, 1 Nov 2011 15:01:28 -0400 Subject: staging: usbip: bugfix for deadlock Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep. If interrupts are not disabled, it can potentially lead to a deadlock. The deadlock is readily reproduceable on a slower (ARM based) device such as the TI Pandaboard. Signed-off-by: Bart Westgeest Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 09c44ab..3872b8c 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -68,6 +68,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, { struct usbip_device *ud = &vdev->ud; struct urb *urb; + unsigned long flags; spin_lock(&vdev->priv_lock); urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); @@ -101,9 +102,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, usbip_dbg_vhci_rx("now giveback urb %p\n", urb); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); @@ -141,6 +142,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, { struct vhci_unlink *unlink; struct urb *urb; + unsigned long flags; usbip_dump_header(pdu); @@ -170,9 +172,9 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, urb->status = pdu->u.ret_unlink.status; pr_info("urb->status %d\n", urb->status); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); -- cgit v0.10.2 From f7364ba04b0961f3a1f978bbe77102606801e35f Mon Sep 17 00:00:00 2001 From: wwang Date: Mon, 31 Oct 2011 15:02:53 +0800 Subject: staging:rts_pstor:Complete scanning_done variable Complete scanning_done variable if rtsx-scan thread created failed. Signed-off-by: wwang Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index 480b0ed..115635f 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -1021,6 +1021,7 @@ static int __devinit rtsx_probe(struct pci_dev *pci, th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan"); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start the device-scanning thread\n"); + complete(&dev->scanning_done); quiesce_and_remove_host(dev); err = PTR_ERR(th); goto errout; -- cgit v0.10.2 From 8b78607fc4a26c2e26c4a614ff0bbd3380abc402 Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:21:37 +0000 Subject: staging: comedi: usbduxsigma: Fixed wrong range for the analogue channel. It's actually +/-2.65V/2 and not +/-2.65V. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index a8fea9a91..6144afb 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.6" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com" /* @@ -25,7 +25,7 @@ Driver: usbduxsigma Description: University of Stirling USB DAQ & INCITE Technology Limited Devices: [ITL] USB-DUX (usbduxsigma.o) Author: Bernd Porr -Updated: 21 Jul 2011 +Updated: 8 Nov 2011 Status: testing */ /* @@ -44,6 +44,7 @@ Status: testing * 0.3: proper vendor ID and driver name * 0.4: fixed D/A voltage range * 0.5: various bug fixes, health check at startup + * 0.6: corrected wrong input range */ /* generates loads of debug info */ @@ -175,7 +176,7 @@ Status: testing /* comedi constants */ static const struct comedi_lrange range_usbdux_ai_range = { 1, { BIP_RANGE - (2.65) + (2.65/2.0) } }; -- cgit v0.10.2 From 3ffab428f40849ed5f21bcfd7285bdef7902f9ca Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:23:03 +0000 Subject: staging: comedi: fix oops for USB DAQ devices. This fixes kernel oops when an USB DAQ device is plugged out while it's communicating with the userspace software. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 21d8c1c..156622a 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1452,9 +1452,6 @@ static struct vm_operations_struct comedi_vm_ops = { static int comedi_mmap(struct file *file, struct vm_area_struct *vma) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_async *async = NULL; unsigned long start = vma->vm_start; unsigned long size; @@ -1462,6 +1459,15 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma) int i; int retval; struct comedi_subdevice *s; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + + dev_file_info = comedi_get_device_file_info(minor); + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1528,11 +1534,17 @@ static unsigned int comedi_poll(struct file *file, poll_table * wait) { unsigned int mask = 0; const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *read_subdev; struct comedi_subdevice *write_subdev; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1578,9 +1590,15 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1683,9 +1701,15 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1885,11 +1909,17 @@ ok: static int comedi_close(struct inode *inode, struct file *file) { const unsigned minor = iminor(inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *s = NULL; int i; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); @@ -1923,10 +1953,15 @@ static int comedi_close(struct inode *inode, struct file *file) static int comedi_fasync(int fd, struct file *file, int on) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; return fasync_helper(fd, file, on, &dev->async_queue); } -- cgit v0.10.2 From df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:45:39 +0200 Subject: Staging: comedi: fix mmap_count In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but it is not incremented at comedi_vm_ops->open. This may result in a negative counter. The patch introduces the open method to keep the counter consistent. The bug was triggerd by this sample code: mmap(0, ...., comedi_fd); fork(); exit(0); Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 156622a..88caa73 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1432,7 +1432,21 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s) return ret; } -static void comedi_unmap(struct vm_area_struct *area) + +static void comedi_vm_open(struct vm_area_struct *area) +{ + struct comedi_async *async; + struct comedi_device *dev; + + async = area->vm_private_data; + dev = async->subdevice->device; + + mutex_lock(&dev->mutex); + async->mmap_count++; + mutex_unlock(&dev->mutex); +} + +static void comedi_vm_close(struct vm_area_struct *area) { struct comedi_async *async; struct comedi_device *dev; @@ -1446,7 +1460,8 @@ static void comedi_unmap(struct vm_area_struct *area) } static struct vm_operations_struct comedi_vm_ops = { - .close = comedi_unmap, + .open = comedi_vm_open, + .close = comedi_vm_close, }; static int comedi_mmap(struct file *file, struct vm_area_struct *vma) -- cgit v0.10.2 From 6a9ce6b654e491981f6ef7e214cbd4f63e033848 Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:47:39 +0200 Subject: Staging: comedi: fix signal handling in read and write After sleeping on a wait queue, signal_pending(current) should be checked (not before sleeping). Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 88caa73..ebdcecd 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1673,11 +1673,11 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) break; if (s->busy != file) { @@ -1780,11 +1780,11 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) { retval = 0; break; -- cgit v0.10.2 From e384a41141949843899affcf51f4e6e646c1fe9f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:20:43 +0300 Subject: Staging: comedi: integer overflow in do_insnlist_ioctl() There is an integer overflow here that could cause memory corruption on 32 bit systems. insnlist.n_insns could be a very high value size calculation for kmalloc() could overflow resulting in a smaller "insns" than expected. In the for (i = 0; i < insnlist.n_insns; i++) {... loop we would read past the end of the buffer, possibly corrupting memory as well. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecd..ed4853f 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,6 +670,11 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } + if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { + ret = -EINVAL; + goto error; + } + insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { -- cgit v0.10.2 From 46b1848360c8e634e0b063932a1261062fa0f7d6 Mon Sep 17 00:00:00 2001 From: Dirk Nehring Date: Thu, 24 Nov 2011 19:22:23 +0100 Subject: usb: option: add Huawei E353 controlling interfaces This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d865878..6e09857 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -661,6 +661,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, -- cgit v0.10.2 From ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 Mon Sep 17 00:00:00 2001 From: Veli-Pekka Peltola Date: Thu, 24 Nov 2011 22:08:56 +0200 Subject: usb: option: add SIMCom SIM5218 Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e09857..e342660 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -750,6 +750,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, -- cgit v0.10.2 From cec28a5428793b6bc64e56687fb239759d6da74e Mon Sep 17 00:00:00 2001 From: Qinglin Ye Date: Wed, 23 Nov 2011 23:39:32 +0800 Subject: USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 3041a97..24caba7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1854,6 +1854,13 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Qinglin Ye */ +UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, + "Kingston", + "DT 101 G2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG ), + /* Reported by Francesco Foresti */ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, "Super Top", -- cgit v0.10.2 From 8746c83d538cab273d335acb2be226d096f4a5af Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Nov 2011 10:28:31 +0300 Subject: USB: whci-hcd: fix endian conversion in qset_clear() qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index d6e1754..a403b53 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -124,7 +124,7 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) { qset->td_start = qset->td_end = qset->ntds = 0; - qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; qset->qh.scratch[0] = 0; -- cgit v0.10.2 From 5b895eec118ab5fec7b69102d73c1b04a86140b9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 27 Nov 2011 15:54:49 +0000 Subject: ASoC: Correct name of Speyside Main Speaker widget Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index 85bf541..4b8e354 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -191,7 +191,7 @@ static int speyside_late_probe(struct snd_soc_card *card) snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); - snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); -- cgit v0.10.2 From 92bb43e6aae3dbdb199feba93da5f2d05d7716d0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 14:48:24 +0300 Subject: ALSA: hda - cut and paste typo in cs420x_models[] The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 7bd2a52..70a7abd 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -1278,7 +1278,7 @@ static const char * const cs420x_models[CS420X_MODELS] = { [CS420X_MBP53] = "mbp53", [CS420X_MBP55] = "mbp55", [CS420X_IMAC27] = "imac27", - [CS420X_IMAC27] = "apple", + [CS420X_APPLE] = "apple", [CS420X_AUTO] = "auto", }; -- cgit v0.10.2 From 187d333edc0a8e1bb507900ce89853ffe3bd2c84 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 24 Nov 2011 16:33:09 +0100 Subject: ALSA: hda - Fix jack-detection control of VT1708 VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: [v3.1] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 431c0d4..b513762 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -208,6 +208,7 @@ struct via_spec { /* work to check hp jack state */ struct hda_codec *codec; struct delayed_work vt1708_hp_work; + int hp_work_active; int vt1708_jack_detect; int vt1708_hp_present; @@ -305,27 +306,35 @@ enum { static void analog_low_current_mode(struct hda_codec *codec); static bool is_aa_path_mute(struct hda_codec *codec); -static void vt1708_start_hp_work(struct via_spec *spec) +#define hp_detect_with_aa(codec) \ + (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1 && \ + !is_aa_path_mute(codec)) + +static void vt1708_stop_hp_work(struct via_spec *spec) { if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0) return; - snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, - !spec->vt1708_jack_detect); - if (!delayed_work_pending(&spec->vt1708_hp_work)) - schedule_delayed_work(&spec->vt1708_hp_work, - msecs_to_jiffies(100)); + if (spec->hp_work_active) { + snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 1); + cancel_delayed_work_sync(&spec->vt1708_hp_work); + spec->hp_work_active = 0; + } } -static void vt1708_stop_hp_work(struct via_spec *spec) +static void vt1708_update_hp_work(struct via_spec *spec) { if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0) return; - if (snd_hda_get_bool_hint(spec->codec, "analog_loopback_hp_detect") == 1 - && !is_aa_path_mute(spec->codec)) - return; - snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, - !spec->vt1708_jack_detect); - cancel_delayed_work_sync(&spec->vt1708_hp_work); + if (spec->vt1708_jack_detect && + (spec->active_streams || hp_detect_with_aa(spec->codec))) { + if (!spec->hp_work_active) { + snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 0); + schedule_delayed_work(&spec->vt1708_hp_work, + msecs_to_jiffies(100)); + spec->hp_work_active = 1; + } + } else if (!hp_detect_with_aa(spec->codec)) + vt1708_stop_hp_work(spec); } static void set_widgets_power_state(struct hda_codec *codec) @@ -343,12 +352,7 @@ static int analog_input_switch_put(struct snd_kcontrol *kcontrol, set_widgets_power_state(codec); analog_low_current_mode(snd_kcontrol_chip(kcontrol)); - if (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1) { - if (is_aa_path_mute(codec)) - vt1708_start_hp_work(codec->spec); - else - vt1708_stop_hp_work(codec->spec); - } + vt1708_update_hp_work(codec->spec); return change; } @@ -1154,7 +1158,7 @@ static int via_playback_multi_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_dac_stream_tag = stream_tag; spec->cur_dac_format = format; mutex_unlock(&spec->config_mutex); - vt1708_start_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1174,7 +1178,7 @@ static int via_playback_hp_pcm_prepare(struct hda_pcm_stream *hinfo, spec->cur_hp_stream_tag = stream_tag; spec->cur_hp_format = format; mutex_unlock(&spec->config_mutex); - vt1708_start_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1188,7 +1192,7 @@ static int via_playback_multi_pcm_cleanup(struct hda_pcm_stream *hinfo, snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); spec->active_streams &= ~STREAM_MULTI_OUT; mutex_unlock(&spec->config_mutex); - vt1708_stop_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1203,7 +1207,7 @@ static int via_playback_hp_pcm_cleanup(struct hda_pcm_stream *hinfo, snd_hda_codec_setup_stream(codec, spec->hp_dac_nid, 0, 0, 0); spec->active_streams &= ~STREAM_INDEP_HP; mutex_unlock(&spec->config_mutex); - vt1708_stop_hp_work(spec); + vt1708_update_hp_work(spec); return 0; } @@ -1645,7 +1649,8 @@ static void via_hp_automute(struct hda_codec *codec) int nums; struct via_spec *spec = codec->spec; - if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0]) + if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0] && + (spec->codec_type != VT1708 || spec->vt1708_jack_detect)) present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]); if (spec->smart51_enabled) @@ -2612,8 +2617,6 @@ static int vt1708_jack_detect_get(struct snd_kcontrol *kcontrol, if (spec->codec_type != VT1708) return 0; - spec->vt1708_jack_detect = - !((snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8) & 0x1); ucontrol->value.integer.value[0] = spec->vt1708_jack_detect; return 0; } @@ -2623,18 +2626,22 @@ static int vt1708_jack_detect_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct via_spec *spec = codec->spec; - int change; + int val; if (spec->codec_type != VT1708) return 0; - spec->vt1708_jack_detect = ucontrol->value.integer.value[0]; - change = (0x1 & (snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8)) - == !spec->vt1708_jack_detect; - if (spec->vt1708_jack_detect) { + val = !!ucontrol->value.integer.value[0]; + if (spec->vt1708_jack_detect == val) + return 0; + spec->vt1708_jack_detect = val; + if (spec->vt1708_jack_detect && + snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") != 1) { mute_aa_path(codec, 1); notify_aa_path_ctls(codec); } - return change; + via_hp_automute(codec); + vt1708_update_hp_work(spec); + return 1; } static const struct snd_kcontrol_new vt1708_jack_detect_ctl = { @@ -2771,6 +2778,7 @@ static int via_init(struct hda_codec *codec) via_auto_init_unsol_event(codec); via_hp_automute(codec); + vt1708_update_hp_work(spec); return 0; } @@ -2787,7 +2795,9 @@ static void vt1708_update_hp_jack_state(struct work_struct *work) spec->vt1708_hp_present ^= 1; via_hp_automute(spec->codec); } - vt1708_start_hp_work(spec); + if (spec->vt1708_jack_detect) + schedule_delayed_work(&spec->vt1708_hp_work, + msecs_to_jiffies(100)); } static int get_mux_nids(struct hda_codec *codec) -- cgit v0.10.2 From 06b446c8af5db5a98b2eaa30b513c79089ed254b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 28 Nov 2011 04:34:34 +0900 Subject: Revert "Staging: comedi: integer overflow in do_insnlist_ioctl()" This reverts commit e384a41141949843899affcf51f4e6e646c1fe9f. It's not the correct way to solve this issue. Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ed4853f..ebdcecd 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,11 +670,6 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } - if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { - ret = -EINVAL; - goto error; - } - insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { -- cgit v0.10.2 From dfd8ee92a9192d78aa38cf8699df3630a7c88c85 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 25 Nov 2011 16:46:51 -0500 Subject: Staging: comedi: fix integer overflow in do_insnlist_ioctl() There is a potential integer overflow in do_insnlist_ioctl() if userspace passes in a large insnlist.n_insns. The call to kmalloc() would allocate a small buffer, leading to a memory corruption. The bug was reported by Dan Carpenter and Haogang Chen . The patch was suggested by Ian Abbott and Lars-Peter Clausen . Reported-by: Dan Carpenter Reported-by: Haogang Chen . Cc: Ian Abbott Cc: Lars-Peter Clausen Signed-off-by: Xi Wang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecd..5e78c77 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -671,7 +671,7 @@ static int do_insnlist_ioctl(struct comedi_device *dev, } insns = - kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); + kcalloc(insnlist.n_insns, sizeof(struct comedi_insn), GFP_KERNEL); if (!insns) { DPRINTK("kmalloc failed\n"); ret = -ENOMEM; -- cgit v0.10.2 From 06718f151144aa5eea97cdf2813fe7eb70e73d17 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 26 Nov 2011 23:37:43 +0100 Subject: ath9k: Revert change that broke AR928X on Acer Ferrari One Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f232 ("ath9k_hw: Add support for AR946/8x chipsets") that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki Acked-by: Felix Fietkau Signed-off-by: Linus Torvalds diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2f91acc..8873c6e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1827,7 +1827,8 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) } /* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */ - REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); } /* -- cgit v0.10.2 From c4860ba2e11261a541632ceee8267ca490d9eb98 Mon Sep 17 00:00:00 2001 From: Aries Lee Date: Mon, 21 Nov 2011 10:20:42 +0000 Subject: jme: PHY configuration for compatible issue To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee Signed-off-by: Guo-Fu Tseng Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 7becff1..76b8457 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1745,6 +1745,112 @@ jme_phy_off(struct jme_adapter *jme) } static int +jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_READ | specreg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); + return jme_mdio_read(jme->dev, jme->mii_if.phy_id, + JM_PHY_SPEC_DATA_REG); +} + +static void +jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG, + phy_data); + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); +} + +static int +jme_phy_calibration(struct jme_adapter *jme) +{ + u32 ctrl1000, phy_data; + + jme_phy_off(jme); + jme_phy_on(jme); + /* Enabel PHY test mode 1 */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + ctrl1000 |= PHY_GAD_TEST_MODE_1; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0; + phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH | + JM_PHY_EXT_COMM_2_CALI_ENABLE; + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + msleep(20); + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE | + JM_PHY_EXT_COMM_2_CALI_MODE_0 | + JM_PHY_EXT_COMM_2_CALI_LATCH); + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + + /* Disable PHY test mode */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + return 0; +} + +static int +jme_phy_setEA(struct jme_adapter *jme) +{ + u32 phy_comm0 = 0, phy_comm1 = 0; + u8 nic_ctrl; + + pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl); + if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE) + return 0; + + switch (jme->pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMC250: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + break; + case PCI_DEVICE_ID_JMICRON_JMC260: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0)) + phy_comm0 = 0x608A; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2)) + phy_comm0 = 0x408A; + break; + default: + return -ENODEV; + } + if (phy_comm0) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0); + if (phy_comm1) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1); + + return 0; +} + +static int jme_open(struct net_device *netdev) { struct jme_adapter *jme = netdev_priv(netdev); @@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_reset_link(jme); return 0; @@ -3184,7 +3291,8 @@ jme_resume(struct device *dev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_start_irq(jme); netif_device_attach(netdev); @@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, jme_pci_tbl); - diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 02ea27c..4304072b 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -760,6 +760,25 @@ enum jme_rxmcs_bits { RXMCS_CHECKSUM, }; +/* Extern PHY common register 2 */ + +#define PHY_GAD_TEST_MODE_1 0x00002000 +#define PHY_GAD_TEST_MODE_MSK 0x0000E000 +#define JM_PHY_SPEC_REG_READ 0x00004000 +#define JM_PHY_SPEC_REG_WRITE 0x00008000 +#define PHY_CALIBRATION_DELAY 20 +#define JM_PHY_SPEC_ADDR_REG 0x1E +#define JM_PHY_SPEC_DATA_REG 0x1F + +#define JM_PHY_EXT_COMM_0_REG 0x30 +#define JM_PHY_EXT_COMM_1_REG 0x31 +#define JM_PHY_EXT_COMM_2_REG 0x32 +#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01 +#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02 +#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10 +#define PCI_PRIV_SHARE_NICCTRL 0xF5 +#define JME_FLAG_PHYEA_ENABLE 0x2 + /* * Wakeup Frame setup interface registers */ -- cgit v0.10.2 From a5f70b6717a229ad10aa79382a29a8ee6f1976c3 Mon Sep 17 00:00:00 2001 From: Christian Hitz Date: Mon, 24 Oct 2011 08:57:32 +0200 Subject: ARM: at91: fix NAND bus width decoding from system_rev Make it is safe to assign the return value of this function to u8/u16 variables. Signed-off-by: Christian Hitz Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f48660..ec164a4 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v0.10.2 From d4d6373c1109b11c8118340be97ae31b8f94d66a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 28 Nov 2011 14:06:31 +0800 Subject: regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator In current implementation, the pointer ri is not NULL if no id is matched. Fix it by checking i == ARRAY_SIZE(aat2870_regulators) if no id is matched. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c index 5abeb3a..298c6c6 100644 --- a/drivers/regulator/aat2870-regulator.c +++ b/drivers/regulator/aat2870-regulator.c @@ -160,7 +160,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id) break; } - if (!ri) + if (i == ARRAY_SIZE(aat2870_regulators)) return NULL; ri->enable_addr = AAT2870_LDO_EN; -- cgit v0.10.2 From 58fb5cf5d1edb7e306574833ee55d732918c89e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Mon, 28 Nov 2011 15:38:37 +0100 Subject: regulator: fix use after free bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is caused by dereferencing 'rdev' after device_unregister() in the regulator_unregister() function. 'rdev' is freed by device_unregister(), so it must not be dereferenced after this call. [Edited commit message for legibility -- broonie] Signed-off-by: Lothar Waßmann Signed-off-by: Mark Brown diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 669d021..938398f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2799,8 +2799,8 @@ void regulator_unregister(struct regulator_dev *rdev) list_del(&rdev->list); if (rdev->supply) regulator_put(rdev->supply); - device_unregister(&rdev->dev); kfree(rdev->constraints); + device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_unregister); -- cgit v0.10.2 From 52553ddffad76ccf192d4dd9ce88d5818f57f62a Mon Sep 17 00:00:00 2001 From: Edward Donovan Date: Sun, 27 Nov 2011 23:07:34 -0500 Subject: genirq: fix regression in irqfixup, irqpoll MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit fa27271bc8d2("genirq: Fixup poll handling") introduced a regression that broke irqfixup/irqpoll for some hardware configurations. Amidst reorganizing 'try_one_irq', that patch removed a test that checked for 'action->handler' returning IRQ_HANDLED, before acting on the interrupt. Restoring this test back returns the functionality lost since 2.6.39. In the current set of tests, after 'action' is set, it must precede '!action->next' to take effect. With this and my previous patch to irq/spurious.c, c75d720fca8a, all IRQ regressions that I have encountered are fixed. Signed-off-by: Edward Donovan Reported-and-tested-by: Rogério Brito Cc: Thomas Gleixner Cc: stable@kernel.org (2.6.39+) Signed-off-by: Linus Torvalds diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index b5f4742..dc813a9 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -84,7 +84,9 @@ static int try_one_irq(int irq, struct irq_desc *desc, bool force) */ action = desc->action; if (!action || !(action->flags & IRQF_SHARED) || - (action->flags & __IRQF_TIMER) || !action->next) + (action->flags & __IRQF_TIMER) || + (action->handler(irq, action->dev_id) == IRQ_HANDLED) || + !action->next) goto out; /* Already running on another processor */ -- cgit v0.10.2 From df711fc9962b9491af2b92bd0d21ecbfefe4e5fa Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Thu, 17 Nov 2011 13:07:44 +0800 Subject: xHCI: reset-on-resume quirk for NEC uPD720200 Julian Sikorski reports NEC uPD720200 does not work stable after suspend and resume. Re-initialize the host in xhci_resume(). This should be backported to stable kernels as old as 2.6.37. The kernel will need to include commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host" for this patch to work. Signed-off-by: Andiry Xu Reported-by: Julian Sikorski Tested-by: Julian Sikorski Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38..d2a7332 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,6 +33,8 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 +#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -74,8 +76,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) + if (pdev->vendor == PCI_VENDOR_ID_NEC) { xhci->quirks |= XHCI_NEC_HOST; + if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) + xhci->quirks |= XHCI_RESET_ON_RESUME; + } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; -- cgit v0.10.2 From e007b857e88097c96c45620bf3b04a4e309053d1 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 24 Nov 2011 18:13:56 +0200 Subject: nl80211: fix MAC address validation MAC addresses have a fixed length. The current policy allows passing < ETH_ALEN bytes, which might result in reading beyond the buffer. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b3a476f..ffafda5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -89,8 +89,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_IFINDEX] = { .type = NLA_U32 }, [NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 }, - [NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN }, - [NL80211_ATTR_PREV_BSSID] = { .type = NLA_BINARY, .len = ETH_ALEN }, + [NL80211_ATTR_MAC] = { .len = ETH_ALEN }, + [NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN }, [NL80211_ATTR_KEY] = { .type = NLA_NESTED, }, [NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY, -- cgit v0.10.2 From 24f50a9d165745fd0701c6e089d35f58a229ea69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Nov 2011 20:06:14 +0100 Subject: mac80211: don't stop a single aggregation session twice Nikolay noticed (by code review) that mac80211 can attempt to stop an aggregation session while it is already being stopped. So to fix it, check whether stop is already being done and bail out if so. Also move setting the STOPPING state into the lock so things are properly atomic. Cc: stable@vger.kernel.org Reported-by: Nikolay Martynov Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 2ac0339..674b345 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -160,6 +160,12 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return -ENOENT; } + /* if we're already stopping ignore any new requests to stop */ + if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { + spin_unlock_bh(&sta->lock); + return -EALREADY; + } + if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { /* not even started yet! */ ieee80211_assign_tid_tx(sta, tid, NULL); @@ -168,6 +174,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return 0; } + set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); + spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG @@ -175,8 +183,6 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, sta->sta.addr, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); - del_timer_sync(&tid_tx->addba_resp_timer); /* -- cgit v0.10.2 From e55b32c110b025ce07b40227f620e99700bf8741 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 28 Nov 2011 10:33:40 +0100 Subject: rtlwifi: fix lps_lock deadlock rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [] __lock_acquire+0x369/0xd0c [ 93.815947] [] lock_acquire+0xf3/0x13e [ 93.815947] [] _raw_spin_lock+0x45/0x79 [ 93.815947] [] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [] process_one_work+0x205/0x3e7 [ 93.815947] [] worker_thread+0xda/0x15d [ 93.815947] [] kthread+0xa8/0xb0 [ 93.815947] [] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] [] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [] ? save_stack_trace+0x2c/0x49 [ 93.815947] [] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [] mark_lock+0x106/0x220 [ 93.815947] [] __lock_acquire+0x2f5/0xd0c [ 93.815947] [] ? native_sched_clock+0x34/0x36 [ 93.830125] [] ? sched_clock+0x9/0xd [ 93.830125] [] ? sched_clock_local+0x12/0x75 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] lock_acquire+0xf3/0x13e [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _raw_spin_lock+0x45/0x79 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] ? skb_dequeue+0x62/0x6d [ 93.830125] [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [] tasklet_action+0x8d/0xee [ 93.830125] [] __do_softirq+0x112/0x25a [ 93.830125] [] call_softirq+0x1c/0x30 [ 93.830125] [] do_softirq+0x4b/0xa1 [ 93.830125] [] irq_exit+0x5d/0xcf [ 93.830125] [] do_IRQ+0x8e/0xa5 [ 93.830125] [] common_interrupt+0x73/0x73 [ 93.830125] [] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [] ? intel_idle+0xe5/0x10c [ 93.830125] [] ? intel_idle+0xe1/0x10c [ 93.830125] [] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [] cpu_idle+0xab/0x101 [ 93.830125] [] rest_init+0xd7/0xde [ 93.830125] [] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [] start_kernel+0x3dd/0x3ea [ 93.830125] [] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [] ? early_idt_handlers+0x140/0x140 [ 93.830125] [] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt Cc: stable@vger.kernel.org Acked-by: Larry Finger Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index a693fef..0b04b2e 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -394,7 +394,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) if (mac->link_state != MAC80211_LINKED) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); /* Idle for a while if we connect to AP a while ago. */ if (mac->cnt_after_linked >= 2) { @@ -406,7 +406,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } /*Leave the leisure power save mode.*/ @@ -415,8 +415,9 @@ void rtl_lps_leave(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + unsigned long flags; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irqsave(&rtlpriv->locks.lps_lock, flags); if (ppsc->fwctrl_lps) { if (ppsc->dot11_psmode != EACTIVE) { @@ -437,7 +438,7 @@ void rtl_lps_leave(struct ieee80211_hw *hw) rtl_lps_set_psmode(hw, EACTIVE); } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flags); } /* For sw LPS*/ @@ -538,9 +539,9 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw) RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM); } - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } void rtl_swlps_rfon_wq_callback(void *data) @@ -573,9 +574,9 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw) if (rtlpriv->link_info.busytraffic) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM && !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) { -- cgit v0.10.2 From a73228124bed4022d4d4c5663d9679ba2fb99c6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 26 Nov 2011 23:37:43 +0100 Subject: ath9k: Revert change that broke AR928X on Acer Ferrari One Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b479160..7a9c6f7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1826,7 +1826,8 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) } /* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */ - REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); } /* -- cgit v0.10.2 From d305a6557b2c4dca0110f05ffe745b1ef94adb80 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Mon, 28 Nov 2011 09:18:00 +0100 Subject: mac80211: fix race condition caused by late addBA response If addBA responses comes in just after addba_resp_timer has expired mac80211 will still accept it and try to open the aggregation session. This causes drivers to be confused and in some cases even crash. This patch fixes the race condition and makes sure that if addba_resp_timer has expired addBA response is not longer accepted and we do not try to open half-closed session. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov [some adjustments] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 674b345..eea6e5c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -762,11 +762,27 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, goto out; } - del_timer(&tid_tx->addba_resp_timer); + del_timer_sync(&tid_tx->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid); #endif + + /* + * addba_resp_timer may have fired before we got here, and + * caused WANT_STOP to be set. If the stop then was already + * processed further, STOPPING might be set. + */ + if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) || + test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG + "got addBA resp for tid %d but we already gave up\n", + tid); +#endif + goto out; + } + /* * IEEE 802.11-2007 7.3.1.14: * In an ADDBA Response frame, when the Status Code field -- cgit v0.10.2 From 2a1e0fd175dcfd72096ba9291d31e3b1b5342e60 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 27 Nov 2011 15:29:44 +0200 Subject: mac80211: fix race between the AGG SM and the Tx data path When a packet is supposed to sent be as an a-MPDU, mac80211 sets IEEE80211_TX_CTL_AMPDU to let the driver know. On the other hand, mac80211 configures the driver for aggregration with the ampdu_action callback. There is race between these two mechanisms since the following scenario can occur when the BA agreement is torn down: Tx softIRQ drv configuration ========== ================= check OPERATIONAL bit Set the TX_CTL_AMPDU bit in the packet clear OPERATIONAL bit stop Tx AGG Pass Tx packet to the driver. In that case the driver would get a packet with TX_CTL_AMPDU set although it has already been notified that the BA session has been torn down. To fix this, we need to synchronize all the Qdisc activity after we cleared the OPERATIONAL bit. After that step, all the following packets will be buffered until the driver reports it is ready to get new packets for this RA / TID. This buffering allows not to run into another race that would send packets with TX_CTL_AMPDU unset while the driver hasn't been requested to tear down the BA session yet. This race occurs in practice and iwlwifi complains with a WARN_ON when it happens. Cc: stable@kernel.org Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index eea6e5c..331472c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -192,6 +192,20 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); + /* + * There might be a few packets being processed right now (on + * another CPU) that have already gotten past the aggregation + * check when it was still OPERATIONAL and consequently have + * IEEE80211_TX_CTL_AMPDU set. In that case, this code might + * call into the driver at the same time or even before the + * TX paths calls into it, which could confuse the driver. + * + * Wait for all currently running TX paths to finish before + * telling the driver. New packets will not go through since + * the aggregation session is no longer OPERATIONAL. + */ + synchronize_net(); + tid_tx->stop_initiator = initiator; tid_tx->tx_stop = tx; -- cgit v0.10.2 From ba305e31e88ea5c2f598ff9fbc5424711a429e30 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 28 Nov 2011 16:53:19 +0200 Subject: regulator: twl: fix twl4030 support for smps regulators SMPS regulator voltage control differs from the one of the LDO ones. Current TWL code was using LDO regulator ops for controlling the SMPS regulators, which fails. This was fixed fixed by adding separate regulator type which uses correct logic and calculations for the voltage levels. Signed-off-by: Tero Kristo Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index ee8747f..11cc308 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -71,6 +71,7 @@ struct twlreg_info { #define VREG_TYPE 1 #define VREG_REMAP 2 #define VREG_DEDICATED 3 /* LDO control */ +#define VREG_VOLTAGE_SMPS_4030 9 /* TWL6030 register offsets */ #define VREG_TRANS 1 #define VREG_STATE 2 @@ -514,6 +515,32 @@ static struct regulator_ops twl4030ldo_ops = { .get_status = twl4030reg_get_status, }; +static int +twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, + vsel); + return 0; +} + +static int twl4030smps_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, + VREG_VOLTAGE_SMPS_4030); + + return vsel * 12500 + 600000; +} + +static struct regulator_ops twl4030smps_ops = { + .set_voltage = twl4030smps_set_voltage, + .get_voltage = twl4030smps_get_voltage, +}; + static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -856,6 +883,21 @@ static struct regulator_ops twlsmps_ops = { }, \ } +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ + { \ + .base = offset, \ + .id = num, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .ops = &twl4030smps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \ .base = offset, \ .min_mV = min_mVolts, \ @@ -947,8 +989,8 @@ static struct twlreg_info twl_regs[] = { TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08), TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), -- cgit v0.10.2 From 6225da481597ebff09454c785fe0afc7f5fdbb77 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 28 Nov 2011 20:12:05 +0100 Subject: cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler IRQF_SHARED is required for older controllers that don't support MSI(X) and which may end up sharing an interrupt. Also remove deprecated IRQF_DISABLED. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 8004ac3..6f22ed0 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4880,7 +4880,7 @@ static int cciss_request_irq(ctlr_info_t *h, { if (h->msix_vector || h->msi_vector) { if (!request_irq(h->intr[h->intr_mode], msixhandler, - IRQF_DISABLED, h->devname, h)) + 0, h->devname, h)) return 0; dev_err(&h->pdev->dev, "Unable to get msi irq %d" " for %s\n", h->intr[h->intr_mode], @@ -4889,7 +4889,7 @@ static int cciss_request_irq(ctlr_info_t *h, } if (!request_irq(h->intr[h->intr_mode], intxhandler, - IRQF_DISABLED, h->devname, h)) + IRQF_SHARED, h->devname, h)) return 0; dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n", h->intr[h->intr_mode], h->devname); -- cgit v0.10.2 From 59bd71a81b66990564eac69aedd28ad87a2c81f4 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 28 Nov 2011 20:12:05 +0100 Subject: cciss: fix flush cache transfer length We weren't filling in the transfer length of the flush cache command (it transfers 4 bytes of zeroes). Firmware didn't seem to be bothered by this, but it should be fixed. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6f22ed0..587cce5 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2601,6 +2601,8 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, c->Request.Timeout = 0; c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; + c->Request.CDB[7] = (size >> 8) & 0xFF; + c->Request.CDB[8] = size & 0xFF; break; case TEST_UNIT_READY: c->Request.CDBLen = 6; -- cgit v0.10.2 From c34c97ad8c7c3cdacab2327235c2df4454ff1a06 Mon Sep 17 00:00:00 2001 From: Jonathan Lallinger Date: Thu, 20 Oct 2011 13:25:14 -0500 Subject: RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic Fix another place in the code where logic dealing with the t4_cqe was using the wrong QID. This fixes the counting logic so that it tests against the SQ QID instead of the RQ QID when counting RCQES. Signed-off by: Jonathan Lallinger Signed-off by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index f35a935..0f1607c 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -311,7 +311,7 @@ void c4iw_count_rcqes(struct t4_cq *cq, struct t4_wq *wq, int *count) while (ptr != cq->sw_pidx) { cqe = &cq->sw_queue[ptr]; if (RQ_TYPE(cqe) && (CQE_OPCODE(cqe) != FW_RI_READ_RESP) && - (CQE_QPID(cqe) == wq->rq.qid) && cqe_completes_wr(cqe, wq)) + (CQE_QPID(cqe) == wq->sq.qid) && cqe_completes_wr(cqe, wq)) (*count)++; if (++ptr == cq->size) ptr = 0; -- cgit v0.10.2 From 01b225e18fcb540c5d615ca79ef832473451f118 Mon Sep 17 00:00:00 2001 From: Kumar Sanghvi Date: Mon, 28 Nov 2011 22:09:15 +0530 Subject: RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 Fix logic so that we don't retry with MPAv1 once we have done that already. Otherwise, we end up retrying with MPAv1 even when its not needed on getting peer aborts - and this could lead to kernel panic. Signed-off-by: Kumar Sanghvi Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index b36cdac..760b2fe 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -542,8 +542,10 @@ static void send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb, (mpa_rev_to_use == 2 ? MPA_ENHANCED_RDMA_CONN : 0); mpa->private_data_size = htons(ep->plen); mpa->revision = mpa_rev_to_use; - if (mpa_rev_to_use == 1) + if (mpa_rev_to_use == 1) { ep->tried_with_mpa_v1 = 1; + ep->retry_with_mpa_v1 = 0; + } if (mpa_rev_to_use == 2) { mpa->private_data_size += -- cgit v0.10.2 From 8ee887d74b3d741991edaa1836d22636c28926d9 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 9 Nov 2011 17:07:22 -0500 Subject: IB/qib: Fix over-scheduling of QSFP work Don't over-schedule QSFP work on driver initialization. It could end up being run simultaneously on two different CPUs resulting in bad EEPROM reads. In combination with setting the physical IB link state prior to the IBC being brought out of reset, this can cause the link state machine to start training early with wrong settings. Signed-off-by: Mitko Haralanov Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 8b46b60..1d58959 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2307,19 +2307,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) SYM_LSB(IBCCtrlA_0, MaxPktLen); ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ - /* initially come up waiting for TS1, without sending anything. */ - val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << - QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); - - ppd->cpspec->ibcctrl_a = val; /* * Reset the PCS interface to the serdes (and also ibc, which is still * in reset from above). Writes new value of ibcctrl_a as last step. */ qib_7322_mini_pcs_reset(ppd); - qib_write_kreg(dd, kr_scratch, 0ULL); - /* clear the linkinit cmds */ - ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); if (!ppd->cpspec->ibcctrl_b) { unsigned lse = ppd->link_speed_enabled; @@ -2385,6 +2377,14 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); set_vls(ppd); + /* initially come up DISABLED, without sending anything. */ + val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << + QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + qib_write_kreg_port(ppd, krp_ibcctrl_a, val); + qib_write_kreg(dd, kr_scratch, 0ULL); + /* clear the linkinit cmds */ + ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); + /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c index e06c4ed..fa71b1e 100644 --- a/drivers/infiniband/hw/qib/qib_qsfp.c +++ b/drivers/infiniband/hw/qib/qib_qsfp.c @@ -480,18 +480,6 @@ void qib_qsfp_init(struct qib_qsfp_data *qd, udelay(20); /* Generous RST dwell */ dd->f_gpio_mod(dd, mask, mask, mask); - /* Spec says module can take up to two seconds! */ - mask = QSFP_GPIO_MOD_PRS_N; - if (qd->ppd->hw_pidx) - mask <<= QSFP_GPIO_PORT2_SHIFT; - - /* Do not try to wait here. Better to let event handle it */ - if (!qib_qsfp_mod_present(qd->ppd)) - goto bail; - /* We see a module, but it may be unwise to look yet. Just schedule */ - qd->t_insert = get_jiffies_64(); - queue_work(ib_wq, &qd->work); -bail: return; } -- cgit v0.10.2 From 5841eb6402707a387b216373e65c9c28e8136663 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:18:39 +0100 Subject: PM / Domains: Document how PM domains are used by the PM core The current power management documentation in Documentation/power/ either doesn't cover PM domains at all, or gives inaccurate information about them, so update the relevant files in there to follow the code. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 646a89e..4342acb 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -123,9 +123,10 @@ please refer directly to the source code for more information about it. Subsystem-Level Methods ----------------------- The core methods to suspend and resume devices reside in struct dev_pm_ops -pointed to by the pm member of struct bus_type, struct device_type and -struct class. They are mostly of interest to the people writing infrastructure -for buses, like PCI or USB, or device type and device class drivers. +pointed to by the ops member of struct dev_pm_domain, or by the pm member of +struct bus_type, struct device_type and struct class. They are mostly of +interest to the people writing infrastructure for platforms and buses, like PCI +or USB, or device type and device class drivers. Bus drivers implement these methods as appropriate for the hardware and the drivers using it; PCI works differently from USB, and so on. Not many people @@ -251,18 +252,29 @@ various phases always run after tasks have been frozen and before they are unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have been disabled (except for those marked with the IRQ_WAKEUP flag). -All phases use bus, type, or class callbacks (that is, methods defined in -dev->bus->pm, dev->type->pm, or dev->class->pm). These callbacks are mutually -exclusive, so if the device type provides a struct dev_pm_ops object pointed to -by its pm field (i.e. both dev->type and dev->type->pm are defined), the -callbacks included in that object (i.e. dev->type->pm) will be used. Otherwise, -if the class provides a struct dev_pm_ops object pointed to by its pm field -(i.e. both dev->class and dev->class->pm are defined), the PM core will use the -callbacks from that object (i.e. dev->class->pm). Finally, if the pm fields of -both the device type and class objects are NULL (or those objects do not exist), -the callbacks provided by the bus (that is, the callbacks from dev->bus->pm) -will be used (this allows device types to override callbacks provided by bus -types or classes if necessary). +All phases use PM domain, bus, type, or class callbacks (that is, methods +defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm). +These callbacks are regarded by the PM core as mutually exclusive. Moreover, +PM domain callbacks always take precedence over bus, type and class callbacks, +while type callbacks take precedence over bus and class callbacks, and class +callbacks take precedence over bus callbacks. To be precise, the following +rules are used to determine which callback to execute in the given phase: + + 1. If dev->pm_domain is present, the PM core will attempt to execute the + callback included in dev->pm_domain->ops. If that callback is not + present, no action will be carried out for the given device. + + 2. Otherwise, if both dev->type and dev->type->pm are present, the callback + included in dev->type->pm will be executed. + + 3. Otherwise, if both dev->class and dev->class->pm are present, the + callback included in dev->class->pm will be executed. + + 4. Otherwise, if both dev->bus and dev->bus->pm are present, the callback + included in dev->bus->pm will be executed. + +This allows PM domains and device types to override callbacks provided by bus +types or device classes if necessary. These callbacks may in turn invoke device- or driver-specific methods stored in dev->driver->pm, but they don't have to. diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 5336149..79b10a0 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -44,17 +44,24 @@ struct dev_pm_ops { }; The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks -are executed by the PM core for either the power domain, or the device type -(if the device power domain's struct dev_pm_ops does not exist), or the class -(if the device power domain's and type's struct dev_pm_ops object does not -exist), or the bus type (if the device power domain's, type's and class' -struct dev_pm_ops objects do not exist) of the given device, so the priority -order of callbacks from high to low is that power domain callbacks, device -type callbacks, class callbacks and bus type callbacks, and the high priority -one will take precedence over low priority one. The bus type, device type and -class callbacks are referred to as subsystem-level callbacks in what follows, -and generally speaking, the power domain callbacks are used for representing -power domains within a SoC. +are executed by the PM core for the device's subsystem that may be either of +the following: + + 1. PM domain of the device, if the device's PM domain object, dev->pm_domain, + is present. + + 2. Device type of the device, if both dev->type and dev->type->pm are present. + + 3. Device class of the device, if both dev->class and dev->class->pm are + present. + + 4. Bus type of the device, if both dev->bus and dev->bus->pm are present. + +The PM core always checks which callback to use in the order given above, so the +priority order of callbacks from high to low is: PM domain, device type, class +and bus type. Moreover, the high-priority one will always take precedence over +a low-priority one. The PM domain, bus type, device type and class callbacks +are referred to as subsystem-level callbacks in what follows. By default, the callbacks are always invoked in process context with interrupts enabled. However, subsystems can use the pm_runtime_irq_safe() helper function -- cgit v0.10.2 From fa8ce723936460fcf7e49f508fd5dbd5125e39c4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:19:57 +0100 Subject: PM / Sleep: Correct inaccurate information in devices.txt The documentation file Documentation/power/devices.txt contains some information that isn't correct any more due to code modifications made after that file had been created (or updated last time). Fix this. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 4342acb..ed32288 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -250,7 +250,7 @@ for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The various phases always run after tasks have been frozen and before they are unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have -been disabled (except for those marked with the IRQ_WAKEUP flag). +been disabled (except for those marked with the IRQF_NO_SUSPEND flag). All phases use PM domain, bus, type, or class callbacks (that is, methods defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm). @@ -295,9 +295,8 @@ When the system goes into the standby or memory sleep state, the phases are: After the prepare callback method returns, no new children may be registered below the device. The method may also prepare the device or - driver in some way for the upcoming system power transition (for - example, by allocating additional memory required for this purpose), but - it should not put the device into a low-power state. + driver in some way for the upcoming system power transition, but it + should not put the device into a low-power state. 2. The suspend methods should quiesce the device to stop it from performing I/O. They also may save the device registers and put it into the -- cgit v0.10.2 From 907565921966260921e4c4581ed8985ef4cf9a67 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:07 +0100 Subject: PM / Runtime: Make documentation follow the new behavior of irq_safe The runtime PM core code behavior related to the power.irq_safe device flag has changed recently and the documentation should be modified to reflect it. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 79b10a0..c2ae8bf 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -65,11 +65,12 @@ are referred to as subsystem-level callbacks in what follows. By default, the callbacks are always invoked in process context with interrupts enabled. However, subsystems can use the pm_runtime_irq_safe() helper function -to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() -callbacks should be invoked in atomic context with interrupts disabled. -This implies that these callback routines must not block or sleep, but it also -means that the synchronous helper functions listed at the end of Section 4 can -be used within an interrupt handler or in an atomic context. +to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and +->runtime_idle() callbacks may be invoked in atomic context with interrupts +disabled for a given device. This implies that the callback routines in +question must not block or sleep, but it also means that the synchronous helper +functions listed at the end of Section 4 may be used for that device within an +interrupt handler or generally in an atomic context. The subsystem-level suspend callback is _entirely_ _responsible_ for handling the suspend of the device as appropriate, which may, but need not include -- cgit v0.10.2 From fafba48d4dd6fcbb1fd7ac4ab0ba22ef45b9796c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:15 +0100 Subject: PM / Sleep: Update documentation related to system wakeup The system wakeup section of Documentation/power/devices.txt is outdated, so make it agree with the current code. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index ed32288..3139fb5 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -140,41 +140,57 @@ sequencing in the driver model tree. /sys/devices/.../power/wakeup files ----------------------------------- -All devices in the driver model have two flags to control handling of wakeup -events (hardware signals that can force the device and/or system out of a low -power state). These flags are initialized by bus or device driver code using +All device objects in the driver model contain fields that control the handling +of system wakeup events (hardware signals that can force the system out of a +sleep state). These fields are initialized by bus or device driver code using device_set_wakeup_capable() and device_set_wakeup_enable(), defined in include/linux/pm_wakeup.h. -The "can_wakeup" flag just records whether the device (and its driver) can +The "power.can_wakeup" flag just records whether the device (and its driver) can physically support wakeup events. The device_set_wakeup_capable() routine -affects this flag. The "should_wakeup" flag controls whether the device should -try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag; -for the most part drivers should not change its value. The initial value of -should_wakeup is supposed to be false for the majority of devices; the major -exceptions are power buttons, keyboards, and Ethernet adapters whose WoL -(wake-on-LAN) feature has been set up with ethtool. It should also default -to true for devices that don't generate wakeup requests on their own but merely -forward wakeup requests from one bus to another (like PCI bridges). +affects this flag. The "power.wakeup" field is a pointer to an object of type +struct wakeup_source used for controlling whether or not the device should use +its system wakeup mechanism and for notifying the PM core of system wakeup +events signaled by the device. This object is only present for wakeup-capable +devices (i.e. devices whose "can_wakeup" flags are set) and is created (or +removed) by device_set_wakeup_capable(). Whether or not a device is capable of issuing wakeup events is a hardware matter, and the kernel is responsible for keeping track of it. By contrast, whether or not a wakeup-capable device should issue wakeup events is a policy decision, and it is managed by user space through a sysfs attribute: the -power/wakeup file. User space can write the strings "enabled" or "disabled" to -set or clear the "should_wakeup" flag, respectively. This file is only present -for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set) -and is created (or removed) by device_set_wakeup_capable(). Reads from the -file will return the corresponding string. - -The device_may_wakeup() routine returns true only if both flags are set. +"power/wakeup" file. User space can write the strings "enabled" or "disabled" +to it to indicate whether or not, respectively, the device is supposed to signal +system wakeup. This file is only present if the "power.wakeup" object exists +for the given device and is created (or removed) along with that object, by +device_set_wakeup_capable(). Reads from the file will return the corresponding +string. + +The "power/wakeup" file is supposed to contain the "disabled" string initially +for the majority of devices; the major exceptions are power buttons, keyboards, +and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with +ethtool. It should also default to "enabled" for devices that don't generate +wakeup requests on their own but merely forward wakeup requests from one bus to +another (like PCI Express ports). + +The device_may_wakeup() routine returns true only if the "power.wakeup" object +exists and the corresponding "power/wakeup" file contains the string "enabled". This information is used by subsystems, like the PCI bus type code, to see whether or not to enable the devices' wakeup mechanisms. If device wakeup mechanisms are enabled or disabled directly by drivers, they also should use device_may_wakeup() to decide what to do during a system sleep transition. -However for runtime power management, wakeup events should be enabled whenever -the device and driver both support them, regardless of the should_wakeup flag. - +Device drivers, however, are not supposed to call device_set_wakeup_enable() +directly in any case. + +It ought to be noted that system wakeup is conceptually different from "remote +wakeup" used by runtime power management, although it may be supported by the +same physical mechanism. Remote wakeup is a feature allowing devices in +low-power states to trigger specific interrupts to signal conditions in which +they should be put into the full-power state. Those interrupts may or may not +be used to signal system wakeup events, depending on the hardware design. On +some systems it is impossible to trigger them from system sleep states. In any +case, remote wakeup should always be enabled for runtime power management for +all devices and drivers that support it. /sys/devices/.../power/control files ------------------------------------ -- cgit v0.10.2 From f7bc83d87d242917ca0ee041ed509f57f361dd56 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Nov 2011 21:20:32 +0100 Subject: PM: Update comments describing device power management callbacks The comments describing device power management callbacks in include/pm.h are outdated and somewhat confusing, so make them reflect the reality more accurately. Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/pm.h b/include/linux/pm.h index 5c4c8b1..3f3ed83 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -54,118 +54,145 @@ typedef struct pm_message { /** * struct dev_pm_ops - device PM callbacks * - * Several driver power state transitions are externally visible, affecting + * Several device power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be - * internal transitions to various low power modes, which are transparent + * internal transitions to various low-power modes which are transparent * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * - * The externally visible transitions are handled with the help of the following - * callbacks included in this structure: - * - * @prepare: Prepare the device for the upcoming transition, but do NOT change - * its hardware state. Prevent new children of the device from being - * registered after @prepare() returns (the driver's subsystem and - * generally the rest of the kernel is supposed to prevent new calls to the - * probe method from being made too once @prepare() has succeeded). If - * @prepare() detects a situation it cannot handle (e.g. registration of a - * child already in progress), it may return -EAGAIN, so that the PM core - * can execute it once again (e.g. after the new child has been registered) - * to recover from the race condition. This method is executed for all - * kinds of suspend transitions and is followed by one of the suspend - * callbacks: @suspend(), @freeze(), or @poweroff(). - * The PM core executes @prepare() for all devices before starting to - * execute suspend callbacks for any of them, so drivers may assume all of - * the other devices to be present and functional while @prepare() is being - * executed. In particular, it is safe to make GFP_KERNEL memory - * allocations from within @prepare(). However, drivers may NOT assume - * anything about the availability of the user space at that time and it - * is not correct to request firmware from within @prepare() (it's too - * late to do that). [To work around this limitation, drivers may - * register suspend and hibernation notifiers that are executed before the - * freezing of tasks.] + * The externally visible transitions are handled with the help of callbacks + * included in this structure in such a way that two levels of callbacks are + * involved. First, the PM core executes callbacks provided by PM domains, + * device types, classes and bus types. They are the subsystem-level callbacks + * supposed to execute callbacks provided by device drivers, although they may + * choose not to do that. If the driver callbacks are executed, they have to + * collaborate with the subsystem-level callbacks to achieve the goals + * appropriate for the given system transition, given transition phase and the + * subsystem the device belongs to. + * + * @prepare: The principal role of this callback is to prevent new children of + * the device from being registered after it has returned (the driver's + * subsystem and generally the rest of the kernel is supposed to prevent + * new calls to the probe method from being made too once @prepare() has + * succeeded). If @prepare() detects a situation it cannot handle (e.g. + * registration of a child already in progress), it may return -EAGAIN, so + * that the PM core can execute it once again (e.g. after a new child has + * been registered) to recover from the race condition. + * This method is executed for all kinds of suspend transitions and is + * followed by one of the suspend callbacks: @suspend(), @freeze(), or + * @poweroff(). The PM core executes subsystem-level @prepare() for all + * devices before starting to invoke suspend callbacks for any of them, so + * generally devices may be assumed to be functional or to respond to + * runtime resume requests while @prepare() is being executed. However, + * device drivers may NOT assume anything about the availability of user + * space at that time and it is NOT valid to request firmware from within + * @prepare() (it's too late to do that). It also is NOT valid to allocate + * substantial amounts of memory from @prepare() in the GFP_KERNEL mode. + * [To work around these limitations, drivers may register suspend and + * hibernation notifiers to be executed before the freezing of tasks.] * * @complete: Undo the changes made by @prepare(). This method is executed for * all kinds of resume transitions, following one of the resume callbacks: * @resume(), @thaw(), @restore(). Also called if the state transition - * fails before the driver's suspend callback (@suspend(), @freeze(), - * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * fails before the driver's suspend callback: @suspend(), @freeze() or + * @poweroff(), can be executed (e.g. if the suspend callback fails for one * of the other devices that the PM core has unsuccessfully attempted to * suspend earlier). - * The PM core executes @complete() after it has executed the appropriate - * resume callback for all devices. + * The PM core executes subsystem-level @complete() after it has executed + * the appropriate resume callbacks for all devices. * * @suspend: Executed before putting the system into a sleep state in which the - * contents of main memory are preserved. Quiesce the device, put it into - * a low power state appropriate for the upcoming system state (such as - * PCI_D3hot), and enable wakeup events as appropriate. + * contents of main memory are preserved. The exact action to perform + * depends on the device's subsystem (PM domain, device type, class or bus + * type), but generally the device must be quiescent after subsystem-level + * @suspend() has returned, so that it doesn't do any I/O or DMA. + * Subsystem-level @suspend() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @resume: Executed after waking the system up from a sleep state in which the - * contents of main memory were preserved. Put the device into the - * appropriate state, according to the information saved in memory by the - * preceding @suspend(). The driver starts working again, responding to - * hardware events and software requests. The hardware may have gone - * through a power-off reset, or it may have maintained state from the - * previous suspend() which the driver may rely on while resuming. On most - * platforms, there are no restrictions on availability of resources like - * clocks during @resume(). + * contents of main memory were preserved. The exact action to perform + * depends on the device's subsystem, but generally the driver is expected + * to start working again, responding to hardware events and software + * requests (the device itself may be left in a low-power state, waiting + * for a runtime resume to occur). The state of the device at the time its + * driver's @resume() callback is run depends on the platform and subsystem + * the device belongs to. On most platforms, there are no restrictions on + * availability of resources like clocks during @resume(). + * Subsystem-level @resume() is executed for all devices after invoking + * subsystem-level @resume_noirq() for all of them. * * @freeze: Hibernation-specific, executed before creating a hibernation image. - * Quiesce operations so that a consistent image can be created, but do NOT - * otherwise put the device into a low power device state and do NOT emit - * system wakeup events. Save in main memory the device settings to be - * used by @restore() during the subsequent resume from hibernation or by - * the subsequent @thaw(), if the creation of the image or the restoration - * of main memory contents from it fails. + * Analogous to @suspend(), but it should not enable the device to signal + * wakeup events or change its power state. The majority of subsystems + * (with the notable exception of the PCI bus type) expect the driver-level + * @freeze() to save the device settings in memory to be used by @restore() + * during the subsequent resume from hibernation. + * Subsystem-level @freeze() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @thaw: Hibernation-specific, executed after creating a hibernation image OR - * if the creation of the image fails. Also executed after a failing + * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. * Undo the changes made by the preceding @freeze(), so the device can be * operated in the same way as immediately before the call to @freeze(). + * Subsystem-level @thaw() is executed for all devices after invoking + * subsystem-level @thaw_noirq() for all of them. It also may be executed + * directly after @freeze() in case of a transition error. * * @poweroff: Hibernation-specific, executed after saving a hibernation image. - * Quiesce the device, put it into a low power state appropriate for the - * upcoming system state (such as PCI_D3hot), and enable wakeup events as - * appropriate. + * Analogous to @suspend(), but it need not save the device's settings in + * memory. + * Subsystem-level @poweroff() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @restore: Hibernation-specific, executed after restoring the contents of main - * memory from a hibernation image. Driver starts working again, - * responding to hardware events and software requests. Drivers may NOT - * make ANY assumptions about the hardware state right prior to @restore(). - * On most platforms, there are no restrictions on availability of - * resources like clocks during @restore(). - * - * @suspend_noirq: Complete the operations of ->suspend() by carrying out any - * actions required for suspending the device that need interrupts to be - * disabled - * - * @resume_noirq: Prepare for the execution of ->resume() by carrying out any - * actions required for resuming the device that need interrupts to be - * disabled - * - * @freeze_noirq: Complete the operations of ->freeze() by carrying out any - * actions required for freezing the device that need interrupts to be - * disabled - * - * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any - * actions required for thawing the device that need interrupts to be - * disabled - * - * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any - * actions required for handling the device that need interrupts to be - * disabled - * - * @restore_noirq: Prepare for the execution of ->restore() by carrying out any - * actions required for restoring the operations of the device that need - * interrupts to be disabled + * memory from a hibernation image, analogous to @resume(). + * + * @suspend_noirq: Complete the actions started by @suspend(). Carry out any + * additional operations required for suspending the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @suspend_noirq() is being executed. + * It generally is expected that the device will be in a low-power state + * (appropriate for the target system sleep state) after subsystem-level + * @suspend_noirq() has returned successfully. If the device can generate + * system wakeup signals and is enabled to wake up the system, it should be + * configured to do so at that time. However, depending on the platform + * and device's subsystem, @suspend() may be allowed to put the device into + * the low-power state and configure it to generate wakeup signals, in + * which case it generally is not necessary to define @suspend_noirq(). + * + * @resume_noirq: Prepare for the execution of @resume() by carrying out any + * operations required for resuming the device that might be racing with + * its driver's interrupt handler, which is guaranteed not to run while + * @resume_noirq() is being executed. + * + * @freeze_noirq: Complete the actions started by @freeze(). Carry out any + * additional operations required for freezing the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @freeze_noirq() is being executed. + * The power state of the device should not be changed by either @freeze() + * or @freeze_noirq() and it should not be configured to signal system + * wakeup by any of these callbacks. + * + * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @thaw_noirq() is being executed. + * + * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to + * @suspend_noirq(), but it need not save the device's settings in memory. + * + * @restore_noirq: Prepare for the execution of @restore() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @restore_noirq() is being executed. Analogous to @resume_noirq(). * * All of the above callbacks, except for @complete(), return error codes. * However, the error codes returned by the resume operations, @resume(), - * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do + * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do * not cause the PM core to abort the resume transition during which they are - * returned. The error codes returned in that cases are only printed by the PM + * returned. The error codes returned in those cases are only printed by the PM * core to the system logs for debugging purposes. Still, it is recommended * that drivers only return error codes from their resume methods in case of an * unrecoverable failure (i.e. when the device being handled refuses to resume @@ -174,31 +201,43 @@ typedef struct pm_message { * their children. * * It is allowed to unregister devices while the above callbacks are being - * executed. However, it is not allowed to unregister a device from within any - * of its own callbacks. + * executed. However, a callback routine must NOT try to unregister the device + * it was called for, although it may unregister children of that device (for + * example, if it detects that a child was unplugged while the system was + * asleep). + * + * Refer to Documentation/power/devices.txt for more information about the role + * of the above callbacks in the system suspend process. * - * There also are the following callbacks related to run-time power management - * of devices: + * There also are callbacks related to runtime power management of devices. + * Again, these callbacks are executed by the PM core only for subsystems + * (PM domains, device types, classes and bus types) and the subsystem-level + * callbacks are supposed to invoke the driver callbacks. Moreover, the exact + * actions to be performed by a device driver's callbacks generally depend on + * the platform and subsystem the device belongs to. * * @runtime_suspend: Prepare the device for a condition in which it won't be * able to communicate with the CPU(s) and RAM due to power management. - * This need not mean that the device should be put into a low power state. + * This need not mean that the device should be put into a low-power state. * For example, if the device is behind a link which is about to be turned * off, the device may remain at full power. If the device does go to low - * power and is capable of generating run-time wake-up events, remote - * wake-up (i.e., a hardware mechanism allowing the device to request a - * change of its power state via a wake-up event, such as PCI PME) should - * be enabled for it. + * power and is capable of generating runtime wakeup events, remote wakeup + * (i.e., a hardware mechanism allowing the device to request a change of + * its power state via an interrupt) should be enabled for it. * * @runtime_resume: Put the device into the fully active state in response to a - * wake-up event generated by hardware or at the request of software. If - * necessary, put the device into the full power state and restore its + * wakeup event generated by hardware or at the request of software. If + * necessary, put the device into the full-power state and restore its * registers, so that it is fully operational. * - * @runtime_idle: Device appears to be inactive and it might be put into a low - * power state if all of the necessary conditions are satisfied. Check + * @runtime_idle: Device appears to be inactive and it might be put into a + * low-power state if all of the necessary conditions are satisfied. Check * these conditions and handle the device as appropriate, possibly queueing * a suspend request for it. The return value is ignored by the PM core. + * + * Refer to Documentation/power/runtime_pm.txt for more information about the + * role of the above callbacks in device runtime power management. + * */ struct dev_pm_ops { -- cgit v0.10.2 From fc07ecd851bd082265b52838eff12f50b88f6114 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 21:16:56 +0000 Subject: ASoC: Error out if we can't generate a LRCLK at all for WM8994 Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 9c982e4..36ba1ed 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2357,6 +2357,11 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT; lrclk = bclk_rate / params_rate(params); + if (!lrclk) { + dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n", + bclk_rate); + return -EINVAL; + } dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", lrclk, bclk_rate / lrclk); -- cgit v0.10.2 From 5cac98dd06bc43a7baab3523184f70fd359e9f35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 27 Nov 2011 21:14:46 +0000 Subject: net: Fix corruption in /proc/*/net/dev_mcast I just hit this during my testing. Isn't there another bug lurking? BUG kmalloc-8: Redzone overwritten INFO: 0xc0000000de9dec48-0xc0000000de9dec4b. First byte 0x0 instead of 0xcc INFO: Allocated in .__seq_open_private+0x30/0xa0 age=0 cpu=5 pid=3896 .__kmalloc+0x1e0/0x2d0 .__seq_open_private+0x30/0xa0 .seq_open_net+0x60/0xe0 .dev_mc_seq_open+0x4c/0x70 .proc_reg_open+0xd8/0x260 .__dentry_open.clone.11+0x2b8/0x400 .do_last+0xf4/0x950 .path_openat+0xf8/0x480 .do_filp_open+0x48/0xc0 .do_sys_open+0x140/0x250 syscall_exit+0x0/0x40 dev_mc_seq_ops uses dev_seq_start/next/stop but only allocates sizeof(struct seq_net_private) of private data, whereas it expects sizeof(struct dev_iter_state): struct dev_iter_state { struct seq_net_private p; unsigned int pos; /* bucket << BUCKET_SPACE + offset */ }; Create dev_seq_open_ops and use it so we don't have to expose struct dev_iter_state. [ Problem added by commit f04565ddf52e4 (dev: use name hash for dev_seq_ops) -Eric ] Signed-off-by: Anton Blanchard Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index cbeb586..a82ad4d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/net/core/dev.c b/net/core/dev.c index 6ba50a1..1482eea 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4282,6 +4282,12 @@ static int dev_seq_open(struct inode *inode, struct file *file) sizeof(struct dev_iter_state)); } +int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops) +{ + return seq_open_net(inode, file, ops, sizeof(struct dev_iter_state)); +} + static const struct file_operations dev_seq_fops = { .owner = THIS_MODULE, .open = dev_seq_open, diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 277faef..febba51 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -696,8 +696,7 @@ static const struct seq_operations dev_mc_seq_ops = { static int dev_mc_seq_open(struct inode *inode, struct file *file) { - return seq_open_net(inode, file, &dev_mc_seq_ops, - sizeof(struct seq_net_private)); + return dev_seq_open_ops(inode, file, &dev_mc_seq_ops); } static const struct file_operations dev_mc_seq_fops = { -- cgit v0.10.2 From 2a38e6d5aed24bb7f0211e0819fac8c32c2b5791 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Sun, 27 Nov 2011 21:33:34 +0000 Subject: ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. We need to set np->mcast_hops to it's default value at this moment otherwise when we use it and found it's value is -1, the logic to get default hop limit doesn't take multicast into account and will return wrong hop limit(IPV6_DEFAULT_HOPLIMIT) which is for unicast. Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c99e3ee..26cb08c 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -503,7 +503,7 @@ done: goto e_inval; if (val > 255 || val < -1) goto e_inval; - np->mcast_hops = val; + np->mcast_hops = (val == -1 ? IPV6_DEFAULT_MCASTHOPS : val); retv = 0; break; -- cgit v0.10.2 From fc8e6e8668e74fbf8e00d6e143d7f43b20f73f32 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 18:48:46 +0000 Subject: ASoC: Supply dcs_codes for newer WM1811 revisions Based on initial data. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 36ba1ed..6c29885 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3183,6 +3183,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) switch (wm8994->revision) { case 0: case 1: + case 2: + case 3: wm8994->hubs.dcs_codes_l = -9; wm8994->hubs.dcs_codes_r = -5; break; -- cgit v0.10.2 From eee628da2ee3cbba6f14696278c92a464239eea6 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Mon, 28 Nov 2011 23:49:33 +0100 Subject: efivars: add missing parameter to efi_pstore_read() In the case where CONFIG_PSTORE=n, the function efi_pstore_read() doesn't have the correct list of parameters. This patch provides a definition of efi_pstore_read() with 'char **buf' added to fix this warning: "drivers/firmware/efivars.c:609: warning: initialization from". problem introduced in commit f6f8285132907757ef84ef8dae0a1244b8cde6ac Signed-off-by: Christoph Fritz Signed-off-by: Tony Luck diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index a54a6b9..b0a8117 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -581,7 +581,8 @@ static int efi_pstore_close(struct pstore_info *psi) } static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi) + struct timespec *timespec, + char **buf, struct pstore_info *psi) { return -1; } -- cgit v0.10.2 From e3420901eba65b1c46bed86d360e3a8685d20734 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Mon, 28 Nov 2011 11:30:22 +0100 Subject: EHCI : Fix a regression in the ISO scheduler Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom Signed-off-by: Matthieu CASTET Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 56a3203..a60679c 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1475,6 +1475,7 @@ iso_stream_schedule ( * jump until after the queue is primed. */ else { + int done = 0; start = SCHEDULE_SLOP + (now & ~0x07); /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ @@ -1492,18 +1493,18 @@ iso_stream_schedule ( if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, stream->usecs, period)) - break; + done = 1; } else { if ((start % 8) >= 6) continue; if (sitd_slot_ok(ehci, mod, stream, start, sched, period)) - break; + done = 1; } - } while (start > next); + } while (start > next && !done); /* no room in the schedule */ - if (start == next) { + if (!done) { ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", urb, now, now + mod); status = -ENOSPC; -- cgit v0.10.2 From 118205d6b6752e22e19b771771174e6426582311 Mon Sep 17 00:00:00 2001 From: Klaus Schwarzkopf Date: Mon, 28 Nov 2011 13:03:25 +0100 Subject: USB: linux-cdc-acm.inf: add support for the acm_ms gadget Support for the acm_ms usb gadget on windows. Signed-off-by: Klaus Schwarzkopf Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf index 37a02ce..f0ffc27 100644 --- a/Documentation/usb/linux-cdc-acm.inf +++ b/Documentation/usb/linux-cdc-acm.inf @@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys [SourceDisksFiles] [SourceDisksNames] [DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 [DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 ;------------------------------------------------------------------------------ -- cgit v0.10.2 From fa8b18edd752a8b4e9d1ee2cd615b82c93cf8bba Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 20 Nov 2011 15:35:32 +0000 Subject: xfs: validate acl count This prevents in-memory corruption and possible panics if the on-disk ACL is badly corrupted. Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index b6c4b37..76e4266 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -42,6 +42,8 @@ xfs_acl_from_disk(struct xfs_acl *aclp) int count, i; count = be32_to_cpu(aclp->acl_cnt); + if (count > XFS_ACL_MAX_ENTRIES) + return ERR_PTR(-EFSCORRUPTED); acl = posix_acl_alloc(count, GFP_KERNEL); if (!acl) -- cgit v0.10.2 -- cgit v0.10.2 From ae7cc709f2ec11b49fc31b20cd8c943794ae9576 Mon Sep 17 00:00:00 2001 From: John F Leach Date: Mon, 28 Nov 2011 19:41:27 -0500 Subject: ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: John F Leach Signed-off-by: Takashi Iwai diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index b61945f..32d2a21 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1633,6 +1633,37 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { + /* Roland GAIA SH-01 */ + USB_DEVICE(0x0582, 0x0111), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Roland", + .product_name = "GAIA", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0003, + .in_cables = 0x0003 + } + }, + { + .ifnum = -1 + } + } + } +}, +{ USB_DEVICE(0x0582, 0x0113), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { /* .vendor_name = "BOSS", */ -- cgit v0.10.2 From 786228ab3095fe18dba3bc0d62055a123991d9d9 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Wed, 23 Nov 2011 20:56:45 +0800 Subject: writeback: Fix issue on make htmldocs Document the @reason parameter to make "make htmldocs" happy. Acked-by: Randy Dunlap Signed-off-by: Marcos Paulo de Souza Signed-off-by: Wu Fengguang diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 73c3992..ac86f8b 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -156,6 +156,7 @@ __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages, * bdi_start_writeback - start writeback * @bdi: the backing device to write from * @nr_pages: the number of pages to write + * @reason: reason why some writeback work was initiated * * Description: * This does WB_SYNC_NONE opportunistic writeback. The IO is only @@ -1223,6 +1224,7 @@ static void wait_sb_inodes(struct super_block *sb) * writeback_inodes_sb_nr - writeback dirty inodes from given super_block * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1251,6 +1253,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_nr); /** * writeback_inodes_sb - writeback dirty inodes from given super_block * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1265,6 +1268,7 @@ EXPORT_SYMBOL(writeback_inodes_sb); /** * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. @@ -1285,6 +1289,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_if_idle); * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. -- cgit v0.10.2 From 58aa4ebe9c718f77f2003a9f815e070bdb4bff5e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:44:13 +0100 Subject: ARM: u300: update defconfig This updates the U300 defconfig to support some new drivers like FSMC, sets it to use the MMC clock gating scheme, and removes some stale config options. Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4a5a126..374000e 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U300=y CONFIG_MACH_U300=y CONFIG_MACH_U300_BS335=y -CONFIG_MACH_U300_DUAL_RAM=y -CONFIG_U300_DEBUG=y CONFIG_MACH_U300_SPIDUMMY=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_HWMON is not set @@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set -- cgit v0.10.2 From 6e2a587eb99267367409097b70cb2d61b09e5269 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Nov 2011 20:30:35 +0100 Subject: ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 97d31a4..2d7b6e7 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y -CONFIG_MACH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y @@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -72,15 +70,12 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -# CONFIG_HWMON is not set CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y +CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y @@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y +CONFIG_HSEM_U8500=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y -- cgit v0.10.2 From 4f718a29fe4908c2cea782f751e9805319684e2b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:14 +0100 Subject: firmware: Sigma: Prevent out of bounds memory access The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index f10fc52..c780baa 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -14,13 +14,34 @@ #include #include -/* Return: 0==OK, <0==error, =1 ==no more actions */ +static size_t sigma_action_size(struct sigma_action *sa) +{ + size_t payload = 0; + + switch (sa->instr) { + case SIGMA_ACTION_WRITEXBYTES: + case SIGMA_ACTION_WRITESINGLE: + case SIGMA_ACTION_WRITESAFELOAD: + payload = sigma_action_len(sa); + break; + default: + break; + } + + payload = ALIGN(payload, 2); + + return payload + sizeof(struct sigma_action); +} + +/* + * Returns a negative error value in case of an error, 0 if processing of + * the firmware should be stopped after this action, 1 otherwise. + */ static int -process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) +process_sigma_action(struct i2c_client *client, struct sigma_action *sa) { - struct sigma_action *sa = (void *)(ssfw->fw->data + ssfw->pos); size_t len = sigma_action_len(sa); - int ret = 0; + int ret; pr_debug("%s: instr:%i addr:%#x len:%zu\n", __func__, sa->instr, sa->addr, len); @@ -29,44 +50,50 @@ process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) case SIGMA_ACTION_WRITEXBYTES: case SIGMA_ACTION_WRITESINGLE: case SIGMA_ACTION_WRITESAFELOAD: - if (ssfw->fw->size < ssfw->pos + len) - return -EINVAL; ret = i2c_master_send(client, (void *)&sa->addr, len); if (ret < 0) return -EINVAL; break; - case SIGMA_ACTION_DELAY: - ret = 0; udelay(len); len = 0; break; - case SIGMA_ACTION_END: - return 1; - + return 0; default: return -EINVAL; } - /* when arrive here ret=0 or sent data */ - ssfw->pos += sigma_action_size(sa, len); - return ssfw->pos == ssfw->fw->size; + return 1; } static int process_sigma_actions(struct i2c_client *client, struct sigma_firmware *ssfw) { - pr_debug("%s: processing %p\n", __func__, ssfw); + struct sigma_action *sa; + size_t size; + int ret; + + while (ssfw->pos + sizeof(*sa) <= ssfw->fw->size) { + sa = (struct sigma_action *)(ssfw->fw->data + ssfw->pos); + + size = sigma_action_size(sa); + ssfw->pos += size; + if (ssfw->pos > ssfw->fw->size || size == 0) + break; + + ret = process_sigma_action(client, sa); - while (1) { - int ret = process_sigma_action(client, ssfw); pr_debug("%s: action returned %i\n", __func__, ret); - if (ret == 1) - return 0; - else if (ret) + + if (ret <= 0) return ret; } + + if (ssfw->pos != ssfw->fw->size) + return -EINVAL; + + return 0; } int process_sigma_firmware(struct i2c_client *client, const char *name) @@ -89,7 +116,14 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) /* then verify the header */ ret = -EINVAL; - if (fw->size < sizeof(*ssfw_head)) + + /* + * Reject too small or unreasonable large files. The upper limit has been + * chosen a bit arbitrarily, but it should be enough for all practical + * purposes and having the limit makes it easier to avoid integer + * overflows later in the loading process. + */ + if (fw->size < sizeof(*ssfw_head) || fw->size >= 0x4000000) goto done; ssfw_head = (void *)fw->data; diff --git a/include/linux/sigma.h b/include/linux/sigma.h index e2accb3..9a138c2 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -50,11 +50,6 @@ static inline u32 sigma_action_len(struct sigma_action *sa) return (sa->len_hi << 16) | sa->len; } -static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len) -{ - return sizeof(*sa) + payload_len + (payload_len % 2); -} - extern int process_sigma_firmware(struct i2c_client *client, const char *name); #endif -- cgit v0.10.2 From c56935bdc0a8edf50237d3b0205133a5b0adc604 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:15 +0100 Subject: firmware: Sigma: Skip header during CRC generation The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index c780baa..36265de 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -130,7 +130,8 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) if (memcmp(ssfw_head->magic, SIGMA_MAGIC, ARRAY_SIZE(ssfw_head->magic))) goto done; - crc = crc32(0, fw->data, fw->size); + crc = crc32(0, fw->data + sizeof(*ssfw_head), + fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); if (crc != ssfw_head->crc) goto done; -- cgit v0.10.2 From bda63586bc5929e97288cdb371bb6456504867ed Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:16 +0100 Subject: firmware: Sigma: Fix endianess issues Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index 36265de..1eedb6f 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -133,7 +133,7 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) crc = crc32(0, fw->data + sizeof(*ssfw_head), fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); - if (crc != ssfw_head->crc) + if (crc != le32_to_cpu(ssfw_head->crc)) goto done; ssfw.pos = sizeof(*ssfw_head); diff --git a/include/linux/sigma.h b/include/linux/sigma.h index 9a138c2..d0de882 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -24,7 +24,7 @@ struct sigma_firmware { struct sigma_firmware_header { unsigned char magic[7]; u8 version; - u32 crc; + __le32 crc; }; enum { @@ -40,14 +40,14 @@ enum { struct sigma_action { u8 instr; u8 len_hi; - u16 len; - u16 addr; + __le16 len; + __be16 addr; unsigned char payload[]; }; static inline u32 sigma_action_len(struct sigma_action *sa) { - return (sa->len_hi << 16) | sa->len; + return (sa->len_hi << 16) | le16_to_cpu(sa->len); } extern int process_sigma_firmware(struct i2c_client *client, const char *name); -- cgit v0.10.2 From 542c9a0a2fa351149c4a3467589a54cafcf0a1dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 29 Nov 2011 13:01:30 +0100 Subject: ALSA: hda - Avoid touching mute-VREF pin for IDT codecs Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f365865..f4f4ebe 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4441,7 +4441,9 @@ static int stac92xx_init(struct hda_codec *codec) int pinctl, def_conf; /* power on when no jack detection is available */ - if (!spec->hp_detect) { + /* or when the VREF is used for controlling LED */ + if (!spec->hp_detect || + (spec->gpio_led > 8 && spec->gpio_led == nid)) { stac_toggle_power_map(codec, nid, 1); continue; } -- cgit v0.10.2 From 4f8b6c7dc80ac9619db033c7f6fc355eab9514f5 Mon Sep 17 00:00:00 2001 From: Marc Vertes Date: Tue, 29 Nov 2011 12:21:17 +0100 Subject: ALSA: hda_intel - revert a quirk that affect VIA chipsets This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.html Signed-of-by: Marc Vertes Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 096507d..7d98240 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2508,7 +2508,6 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), - SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB), SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB), -- cgit v0.10.2 From 5d193ce8f1fa7c67c7fd7be2c03ef31eed344a4f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 22 Nov 2011 17:18:24 -0800 Subject: usb: musb: PM: fix context save/restore in suspend/resume path Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c1fa12e..b63ab15 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2301,18 +2301,12 @@ static int musb_suspend(struct device *dev) */ } - musb_save_context(musb); - spin_unlock_irqrestore(&musb->lock, flags); return 0; } static int musb_resume_noirq(struct device *dev) { - struct musb *musb = dev_to_musb(dev); - - musb_restore_context(musb); - /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). -- cgit v0.10.2 From f8eff0a06116aee127152674e9ea9c51aecf6b69 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:06 -0800 Subject: usb: renesas_usbhs: fixup device_register timing current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But bind() function will fail if it was called before device_register() (or device_add()). This patch modifies this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index d9717e0..ef82274 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -751,53 +751,31 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; - int ret; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - /* first hook up the driver ... */ gpriv->driver = driver; gpriv->gadget.dev.driver = &driver->driver; - ret = device_add(&gpriv->gadget.dev); - if (ret) { - dev_err(dev, "device_add error %d\n", ret); - goto add_fail; - } - return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); - -add_fail: - gpriv->driver = NULL; - gpriv->gadget.dev.driver = NULL; - - return ret; } static int usbhsg_gadget_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->unbind) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); - device_del(&gpriv->gadget.dev); gpriv->driver = NULL; return 0; @@ -876,12 +854,14 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) /* * init gadget */ - device_initialize(&gpriv->gadget.dev); dev_set_name(&gpriv->gadget.dev, "gadget"); gpriv->gadget.dev.parent = dev; gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.is_dualspeed = 1; + ret = device_register(&gpriv->gadget.dev); + if (ret < 0) + goto err_add_udc; INIT_LIST_HEAD(&gpriv->gadget.ep_list); @@ -912,12 +892,15 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) ret = usb_add_gadget_udc(dev, &gpriv->gadget); if (ret) - goto err_add_udc; + goto err_register; dev_info(dev, "gadget probed\n"); return 0; + +err_register: + device_unregister(&gpriv->gadget.dev); err_add_udc: kfree(gpriv->uep); @@ -933,6 +916,8 @@ void usbhs_mod_gadget_remove(struct usbhs_priv *priv) usb_del_gadget_udc(&gpriv->gadget); + device_unregister(&gpriv->gadget.dev); + usbhsg_controller_unregister(gpriv); kfree(gpriv->uep); -- cgit v0.10.2 From 8885a897c26b2f63e1bbb6fa7bd9da3a73a09113 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:38 -0800 Subject: usb: renesas_usbhs: fixup signal the driver that cable was disconnected current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). cable disconnected signal was needed. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ef82274..f4b032e 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -805,6 +805,13 @@ static int usbhsg_start(struct usbhs_priv *priv) static int usbhsg_stop(struct usbhs_priv *priv) { + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + + /* cable disconnect */ + if (gpriv->driver && + gpriv->driver->disconnect) + gpriv->driver->disconnect(&gpriv->gadget); + return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -- cgit v0.10.2 From 0cdd7d4b66aa740ce62aeeaf7fbd495130c2864f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:56 -0800 Subject: usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop. current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But current renesas_usbhs driver didn't care about gadget.dev.driver when udc_stop. it cause rmmod oops. This patch care it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index f4b032e..2be7381 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -776,6 +776,7 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget, return -EINVAL; usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); + gpriv->gadget.dev.driver = NULL; gpriv->driver = NULL; return 0; -- cgit v0.10.2 From 89f829a50f7d0d0f3a15c482a7a65dd0b133a5f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:20:44 -0800 Subject: usb: renesas_usbhs: fixup driver speed This patch cares latest USB_SPEED_SUPER support. renesas_usbhs can not use super-speed, but can use full/high speed. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 2be7381..7f4e803 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -755,7 +755,7 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, if (!driver || !driver->setup || - driver->speed != USB_SPEED_HIGH) + driver->speed < USB_SPEED_FULL) return -EINVAL; /* first hook up the driver ... */ -- cgit v0.10.2 From fef6964452abae55c82e1615ac505b8377df00e9 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 18 Nov 2011 20:16:27 +0100 Subject: usb: gadget: fix g_serial regression Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index 91fdf79..cf33a8d 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -131,8 +131,8 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } if (!gser->port.in->desc || !gser->port.out->desc) { DBG(cdev, "activate generic ttyGS%d\n", gser->port_num); - if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) || - !config_ep_by_speed(cdev->gadget, f, gser->port.out)) { + if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || + config_ep_by_speed(cdev->gadget, f, gser->port.out)) { gser->port.in->desc = NULL; gser->port.out->desc = NULL; return -EINVAL; -- cgit v0.10.2 From bfe0658b402dab3d6fbef4b7bd81a46d0e68eb86 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sat, 19 Nov 2011 18:26:25 +0100 Subject: usb: udc: Fix gadget driver's speed check in various UDC drivers Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz Reported-by: Alan Stern Tested-by: Heiko Stuebner Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 4730016..45f422a 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1959,7 +1959,7 @@ static int amd5536_start(struct usb_gadget_driver *driver, u32 tmp; if (!driver || !bind || !driver->setup - || driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_HIGH) return -EINVAL; if (!dev) return -ENODEV; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 2a03e4d..e00cf92 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2336,8 +2336,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b3b3d83..1482b12 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1938,8 +1938,7 @@ static int fsl_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 91d0af2..9aa1cbb 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1472,7 +1472,7 @@ static int m66592_start(struct usb_gadget_driver *driver, int retval; if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !bind || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 7f1bc9a..da2b9d0 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1881,7 +1881,7 @@ static int net2280_start(struct usb_gadget *_gadget, * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver || driver->speed != USB_SPEED_HIGH + if (!driver || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 24f84b2..fc719a3 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1746,7 +1746,7 @@ static int r8a66597_start(struct usb_gadget *gadget, struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; if (!r8a66597) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a552453..b314482 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2586,10 +2586,8 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, return -EINVAL; } - if (driver->speed != USB_SPEED_HIGH && - driver->speed != USB_SPEED_FULL) { + if (driver->speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - } if (!bind || !driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 8d54f89..20a553b 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1142,8 +1142,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, int ret; if (!driver - || (driver->speed != USB_SPEED_FULL && - driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_FULL || !bind || !driver->unbind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d51043a..922148f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1903,7 +1903,7 @@ static int musb_gadget_start(struct usb_gadget *g, unsigned long flags; int retval = -EINVAL; - if (driver->speed != USB_SPEED_HIGH) + if (driver->speed < USB_SPEED_HIGH) goto err0; pm_runtime_get_sync(musb->controller); -- cgit v0.10.2 From 7c91d908f5af027ed14b3d103331f91f386c1043 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 22 Nov 2011 09:55:45 +0800 Subject: USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen Acked-by: Michal Nazarewicz Acked-by: Li Yang Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 1482b12..bf1cd6e 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -877,7 +877,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) VDBG("%s, bad ep", __func__); return -EINVAL; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -1032,7 +1032,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) goto out; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { status = -EOPNOTSUPP; goto out; } -- cgit v0.10.2 From 65cd5c4d03563f7118c2e83b7a50928e461cbc1e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:28 -0200 Subject: usb: fsl_mxc_udc.c: Fix build issue by including missing header file Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include ' from mx31.h. fsl_mxc_udc.c includes , which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 43a49ec..23eaecf 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -16,6 +16,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From 5ce1d0eb1cd1071347618d0a95515f300239d201 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:29 -0200 Subject: usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 23eaecf..dcbc0a2 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -89,7 +89,6 @@ eenahb: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -#if defined(CONFIG_SOC_IMX35) if (cpu_is_mx35()) { unsigned int v; @@ -102,7 +101,6 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) USBPHYCTRL_OTGBASE_OFFSET)); } } -#endif /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { -- cgit v0.10.2 From 6414e94c203d92b163ca61b5f51a25b80a621dbe Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 23 Nov 2011 20:12:56 +0800 Subject: usb: gadget: fsl_udc: fix dequeuing a request in progress The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang Acked-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index bf1cd6e..dd28ef3 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -696,12 +696,31 @@ static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/*-------------------------------------------------------------------------*/ +/* Actually add a dTD chain to an empty dQH and let go */ +static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td) +{ + struct ep_queue_head *qh = get_qh_by_ep(ep); + + /* Write dQH next pointer and terminate bit to 0 */ + qh->next_dtd_ptr = cpu_to_hc32(td->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK); + + /* Clear active and halt bit */ + qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE + | EP_QUEUE_HEAD_STATUS_HALT)); + + /* Ensure that updates to the QH will occur before priming. */ + wmb(); + + /* Prime endpoint by writing correct bit to ENDPTPRIME */ + fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))), &dr_regs->endpointprime); +} + +/* Add dTD chain to the dQH of an EP */ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) { - int i = ep_index(ep) * 2 + ep_is_in(ep); u32 temp, bitmask, tmp_stat; - struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ @@ -719,7 +738,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); /* Read prime bit, if 1 goto done */ if (fsl_readl(&dr_regs->endpointprime) & bitmask) - goto out; + return; do { /* Set ATDTW bit in USBCMD */ @@ -736,28 +755,10 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); if (tmp_stat) - goto out; + return; } - /* Write dQH next pointer and terminate bit to 0 */ - temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - dQH->next_dtd_ptr = cpu_to_hc32(temp); - - /* Clear active and halt bit */ - temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE - | EP_QUEUE_HEAD_STATUS_HALT)); - dQH->size_ioc_int_sts &= temp; - - /* Ensure that updates to the QH will occur before priming. */ - wmb(); - - /* Prime endpoint by writing 1 to ENDPTPRIME */ - temp = ep_is_in(ep) - ? (1 << (ep_index(ep) + 16)) - : (1 << (ep_index(ep))); - fsl_writel(temp, &dr_regs->endpointprime); -out: - return; + fsl_prime_ep(ep, req->head); } /* Fill in the dTD structure @@ -973,25 +974,20 @@ static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* The request isn't the last request in this ep queue */ if (req->queue.next != &ep->queue) { - struct ep_queue_head *qh; struct fsl_req *next_req; - qh = ep->qh; next_req = list_entry(req->queue.next, struct fsl_req, queue); - /* Point the QH to the first TD of next request */ - fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); + /* prime with dTD of next request */ + fsl_prime_ep(ep, next_req->head); } - - /* The request hasn't been processed, patch up the TD chain */ + /* The request hasn't been processed, patch up the TD chain */ } else { struct fsl_req *prev_req; prev_req = list_entry(req->queue.prev, struct fsl_req, queue); - fsl_writel(fsl_readl(&req->tail->next_td_ptr), - &prev_req->tail->next_td_ptr); - + prev_req->tail->next_td_ptr = req->tail->next_td_ptr; } done(ep, req, -ECONNRESET); @@ -1068,7 +1064,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) struct fsl_udc *udc; int size = 0; u32 bitmask; - struct ep_queue_head *d_qh; + struct ep_queue_head *qh; ep = container_of(_ep, struct fsl_ep, ep); if (!_ep || (!ep->desc && ep_index(ep) != 0)) @@ -1079,13 +1075,13 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)]; + qh = get_qh_by_ep(ep); bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) : (1 << (ep_index(ep))); if (fsl_readl(&dr_regs->endptstatus) & bitmask) - size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE) + size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; pr_debug("%s %u\n", __func__, size); diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 1d51be8..f781f5d 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -569,6 +569,16 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) #define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) +static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) +{ + /* we only have one ep0 structure but two queue heads */ + if (ep_index(ep) != 0) + return ep->qh; + else + return &ep->udc->ep_qh[(ep->udc->ep0_dir == + USB_DIR_IN) ? 1 : 0]; +} + struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -- cgit v0.10.2 From d7fb6d0adb86ed1c5290e754092a5a1e3de76ee9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 27 Nov 2011 20:16:33 -0600 Subject: of/irq: of_irq_init: add check for parent equal to child node With the revert of "of/irq: of_irq_find_parent: check for parent equal to child" (dc9372808412edb), we need another way to handle parent node equal to the child node. This can simply be handled in of_irq_init by checking for this condition. Signed-off-by: Rob Herring Tested-by: Pawel Moll Tested-by: Stephen Warren diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 791270b..19c0115 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -424,6 +424,8 @@ void __init of_irq_init(const struct of_device_id *matches) desc->dev = np; desc->interrupt_parent = of_irq_find_parent(np); + if (desc->interrupt_parent == np) + desc->interrupt_parent = NULL; list_add_tail(&desc->list, &intc_desc_list); } -- cgit v0.10.2 From e43fce14088d9910b545c30c9a7127deb289d477 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 8 Nov 2011 11:35:20 +0000 Subject: of: Add Silicon Image vendor prefix "sil" is the most commonly used abbreviation for Silicon Image products. Signed-off-by: Pawel Moll diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index e855278..874921e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -33,6 +33,7 @@ qcom Qualcomm, Inc. ramtron Ramtron International samsung Samsung Semiconductor schindler Schindler +sil Silicon Image simtek sirf SiRF Technology, Inc. stericsson ST-Ericsson -- cgit v0.10.2 From 4dd2cb4a28b7ab1f37163a4eba280926a13a8749 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Nov 2011 12:06:14 -0600 Subject: xfs: force buffer writeback before blocking on the ilock in inode reclaim If we are doing synchronous inode reclaim we block the VM from making progress in memory reclaim. So if we encouter a flush locked inode promote it in the delwri list and wake up xfsbufd to write it out now. Without this we can get hangs of up to 30 seconds during workloads hitting synchronous inode reclaim. The scheme is copied from what we do for dquot reclaims. Reported-by: Simon Kirby Signed-off-by: Christoph Hellwig Tested-by: Simon Kirby Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index c0237c6..755ee81 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2835,6 +2835,27 @@ corrupt_out: return XFS_ERROR(EFSCORRUPTED); } +void +xfs_promote_inode( + struct xfs_inode *ip) +{ + struct xfs_buf *bp; + + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); + + bp = xfs_incore(ip->i_mount->m_ddev_targp, ip->i_imap.im_blkno, + ip->i_imap.im_len, XBF_TRYLOCK); + if (!bp) + return; + + if (XFS_BUF_ISDELAYWRITE(bp)) { + xfs_buf_delwri_promote(bp); + wake_up_process(ip->i_mount->m_ddev_targp->bt_task); + } + + xfs_buf_relse(bp); +} + /* * Return a pointer to the extent record at file index idx. */ diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 760140d..b4cd473 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -498,6 +498,7 @@ int xfs_iunlink(struct xfs_trans *, xfs_inode_t *); void xfs_iext_realloc(xfs_inode_t *, int, int); void xfs_iunpin_wait(xfs_inode_t *); int xfs_iflush(xfs_inode_t *, uint); +void xfs_promote_inode(struct xfs_inode *); void xfs_lock_inodes(xfs_inode_t **, int, uint); void xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint); diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c index aa3dc1a..be5c51d 100644 --- a/fs/xfs/xfs_sync.c +++ b/fs/xfs/xfs_sync.c @@ -770,6 +770,17 @@ restart: if (!xfs_iflock_nowait(ip)) { if (!(sync_mode & SYNC_WAIT)) goto out; + + /* + * If we only have a single dirty inode in a cluster there is + * a fair chance that the AIL push may have pushed it into + * the buffer, but xfsbufd won't touch it until 30 seconds + * from now, and thus we will lock up here. + * + * Promote the inode buffer to the front of the delwri list + * and wake up xfsbufd now. + */ + xfs_promote_inode(ip); xfs_iflock(ip); } -- cgit v0.10.2 From 4c393a6059f8442a70512a48ce4639b882b6f6ad Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 19 Nov 2011 17:44:30 +0000 Subject: xfs: fix attr2 vs large data fork assert With Dmitry fsstress updates I've seen very reproducible crashes in xfs_attr_shortform_remove because xfs_attr_shortform_bytesfit claims that the attributes would not fit inline into the inode after removing an attribute. It turns out that we were operating on an inode with lots of delalloc extents, and thus an if_bytes values for the data fork that is larger than biggest possible on-disk storage for it which utterly confuses the code near the end of xfs_attr_shortform_bytesfit. Fix this by always allowing the current attribute fork, like we already do for the attr1 format, given that delalloc conversion will take care for moving either the data or attribute area out of line if it doesn't fit at that point - or making the point moot by merging extents at this point. Also document the function better, and clean up some loose bits. Reviewed-by: Dave Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d4906e7..c1b55e5 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -110,6 +110,7 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags) /* * Query whether the requested number of additional bytes of extended * attribute space will be able to fit inline. + * * Returns zero if not, else the di_forkoff fork offset to be used in the * literal area for attribute data once the new bytes have been added. * @@ -122,7 +123,7 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) int offset; int minforkoff; /* lower limit on valid forkoff locations */ int maxforkoff; /* upper limit on valid forkoff locations */ - int dsize; + int dsize; xfs_mount_t *mp = dp->i_mount; offset = (XFS_LITINO(mp) - bytes) >> 3; /* rounded down */ @@ -136,47 +137,60 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) return (offset >= minforkoff) ? minforkoff : 0; } - if (!(mp->m_flags & XFS_MOUNT_ATTR2)) { - if (bytes <= XFS_IFORK_ASIZE(dp)) - return dp->i_d.di_forkoff; + /* + * If the requested numbers of bytes is smaller or equal to the + * current attribute fork size we can always proceed. + * + * Note that if_bytes in the data fork might actually be larger than + * the current data fork size is due to delalloc extents. In that + * case either the extent count will go down when they are converted + * to real extents, or the delalloc conversion will take care of the + * literal area rebalancing. + */ + if (bytes <= XFS_IFORK_ASIZE(dp)) + return dp->i_d.di_forkoff; + + /* + * For attr2 we can try to move the forkoff if there is space in the + * literal area, but for the old format we are done if there is no + * space in the fixed attribute fork. + */ + if (!(mp->m_flags & XFS_MOUNT_ATTR2)) return 0; - } dsize = dp->i_df.if_bytes; - + switch (dp->i_d.di_format) { case XFS_DINODE_FMT_EXTENTS: - /* + /* * If there is no attr fork and the data fork is extents, - * determine if creating the default attr fork will result - * in the extents form migrating to btree. If so, the - * minimum offset only needs to be the space required for + * determine if creating the default attr fork will result + * in the extents form migrating to btree. If so, the + * minimum offset only needs to be the space required for * the btree root. - */ + */ if (!dp->i_d.di_forkoff && dp->i_df.if_bytes > xfs_default_attroffset(dp)) dsize = XFS_BMDR_SPACE_CALC(MINDBTPTRS); break; - case XFS_DINODE_FMT_BTREE: /* - * If have data btree then keep forkoff if we have one, - * otherwise we are adding a new attr, so then we set - * minforkoff to where the btree root can finish so we have + * If we have a data btree then keep forkoff if we have one, + * otherwise we are adding a new attr, so then we set + * minforkoff to where the btree root can finish so we have * plenty of room for attrs */ if (dp->i_d.di_forkoff) { - if (offset < dp->i_d.di_forkoff) + if (offset < dp->i_d.di_forkoff) return 0; - else - return dp->i_d.di_forkoff; - } else - dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot); + return dp->i_d.di_forkoff; + } + dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot); break; } - - /* - * A data fork btree root must have space for at least + + /* + * A data fork btree root must have space for at least * MINDBTPTRS key/ptr pairs if the data fork is small or empty. */ minforkoff = MAX(dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS)); @@ -186,10 +200,10 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) maxforkoff = XFS_LITINO(mp) - XFS_BMDR_SPACE_CALC(MINABTPTRS); maxforkoff = maxforkoff >> 3; /* rounded down */ - if (offset >= minforkoff && offset < maxforkoff) - return offset; if (offset >= maxforkoff) return maxforkoff; + if (offset >= minforkoff) + return offset; return 0; } -- cgit v0.10.2 From c89304b8ea34ab48ba6ae10e06a8b1b8c8212307 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Tue, 29 Nov 2011 09:26:30 +0000 Subject: sctp: better integer overflow check in sctp_auth_create_key() The check from commit 30c2235c is incomplete and cannot prevent cases like key_len = 0x80000000 (INT_MAX + 1). In that case, the left-hand side of the check (INT_MAX - key_len), which is unsigned, becomes 0xffffffff (UINT_MAX) and bypasses the check. However this shouldn't be a security issue. The function is called from the following two code paths: 1) setsockopt() 2) sctp_auth_asoc_set_secret() In case (1), sca_keylength is never going to exceed 65535 since it's bounded by a u16 from the user API. As such, the key length will never overflow. In case (2), sca_keylength is computed based on the user key (1 short) and 2 * key_vector (3 shorts) for a total of 7 * USHRT_MAX, which still will not overflow. In other words, this overflow check is not really necessary. Just make it more correct. Signed-off-by: Xi Wang Cc: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 865e68f..bf81204 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -82,7 +82,7 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp) struct sctp_auth_bytes *key; /* Verify that we are not going to overflow INT_MAX */ - if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes)) + if (key_len > (INT_MAX - sizeof(struct sctp_auth_bytes))) return NULL; /* Allocate the shared key */ -- cgit v0.10.2 From 3874397c0bdec3c21ce071711cd105165179b8eb Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Mon, 21 Nov 2011 08:43:54 -0500 Subject: IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[] [] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [] ? apic_timer_interrupt+0xe/0x20 [] ? apic_timer_interrupt+0xe/0x20 [] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [] ? dev_hard_start_xmit+0x2c8/0x3f0 [] ? sch_direct_xmit+0x15a/0x1c0 [] ? dev_queue_xmit+0x388/0x4d0 [] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [] ? join_handler+0xeb/0x200 [ib_sa] [] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [] ? recv_handler+0x3c/0x70 [ib_sa] [] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [] ? worker_thread+0x170/0x2a0 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x2a0 [] ? kthread+0x96/0xa0 [] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa Reviewed-by: Gary Leshner Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 0ef9af9..4115be5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -57,21 +57,24 @@ struct ipoib_ah *ipoib_create_ah(struct net_device *dev, struct ib_pd *pd, struct ib_ah_attr *attr) { struct ipoib_ah *ah; + struct ib_ah *vah; ah = kmalloc(sizeof *ah, GFP_KERNEL); if (!ah) - return NULL; + return ERR_PTR(-ENOMEM); ah->dev = dev; ah->last_send = 0; kref_init(&ah->ref); - ah->ah = ib_create_ah(pd, attr); - if (IS_ERR(ah->ah)) { + vah = ib_create_ah(pd, attr); + if (IS_ERR(vah)) { kfree(ah); - ah = NULL; - } else + ah = (struct ipoib_ah *)vah; + } else { + ah->ah = vah; ipoib_dbg(netdev_priv(dev), "Created ah %p\n", ah->ah); + } return ah; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7567b60..37c46c6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -432,7 +432,7 @@ static void path_rec_completion(int status, spin_lock_irqsave(&priv->lock, flags); - if (ah) { + if (!IS_ERR_OR_NULL(ah)) { path->pathrec = *pathrec; old_ah = path->ah; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 1b7a976..30ca8f0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -240,8 +240,11 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, av.grh.dgid = mcast->mcmember.mgid; ah = ipoib_create_ah(dev, priv->pd, &av); - if (!ah) { - ipoib_warn(priv, "ib_address_create failed\n"); + if (IS_ERR(ah)) { + ipoib_warn(priv, "ib_address_create failed %ld\n", + -PTR_ERR(ah)); + /* use original error */ + return PTR_ERR(ah); } else { spin_lock_irq(&priv->lock); mcast->ah = ah; -- cgit v0.10.2 From 580da35a31f91a594f3090b7a2c39b85cb051a12 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 29 Nov 2011 22:31:23 +0100 Subject: IB: Fix RCU lockdep splats Commit f2c31e32b37 ("net: fix NULL dereferences in check_peer_redir()") forgot to take care of infiniband uses of dst neighbours. Many thanks to Marc Aurele who provided a nice bug report and feedback. Reported-by: Marc Aurele La France Signed-off-by: Eric Dumazet Cc: David Miller Cc: Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 691276ba..e9cf51b 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -216,7 +216,9 @@ static int addr4_resolve(struct sockaddr_in *src_in, neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, rt->dst.dev); if (!neigh || !(neigh->nud_state & NUD_VALID)) { + rcu_read_lock(); neigh_event_send(dst_get_neighbour(&rt->dst), NULL); + rcu_read_unlock(); ret = -ENODATA; if (neigh) goto release; @@ -274,15 +276,16 @@ static int addr6_resolve(struct sockaddr_in6 *src_in, goto put; } + rcu_read_lock(); neigh = dst_get_neighbour(dst); if (!neigh || !(neigh->nud_state & NUD_VALID)) { if (neigh) neigh_event_send(neigh, NULL); ret = -ENODATA; - goto put; + } else { + ret = rdma_copy_addr(addr, dst->dev, neigh->ha); } - - ret = rdma_copy_addr(addr, dst->dev, neigh->ha); + rcu_read_unlock(); put: dst_release(dst); return ret; diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index de6d077..c88b12b 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1375,8 +1375,10 @@ static int pass_accept_req(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) goto reject; } dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(dst); l2t = t3_l2t_get(tdev, neigh, neigh->dev); + rcu_read_unlock(); if (!l2t) { printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", __func__); @@ -1946,10 +1948,12 @@ int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ ep->l2t = t3_l2t_get(ep->com.tdev, neigh, neigh->dev); + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index b36cdac..75b57bee 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1594,6 +1594,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) goto reject; } dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(dst); if (neigh->dev->flags & IFF_LOOPBACK) { pdev = ip_dev_find(&init_net, peer_ip); @@ -1620,6 +1621,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) rss_qid = dev->rdev.lldi.rxq_ids[ cxgb4_port_idx(neigh->dev) * step]; } + rcu_read_unlock(); if (!l2t) { printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", __func__); @@ -1820,6 +1822,7 @@ static int c4iw_reconnect(struct c4iw_ep *ep) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ @@ -1856,6 +1859,7 @@ static int c4iw_reconnect(struct c4iw_ep *ep) ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[ cxgb4_port_idx(neigh->dev) * step]; } + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; @@ -2301,6 +2305,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) } ep->dst = &rt->dst; + rcu_read_lock(); neigh = dst_get_neighbour(ep->dst); /* get a l2t entry */ @@ -2339,6 +2344,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) ep->retry_with_mpa_v1 = 0; ep->tried_with_mpa_v1 = 0; } + rcu_read_unlock(); if (!ep->l2t) { printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__); err = -ENOMEM; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index dfce9ea..0a52d72 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1377,9 +1377,11 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi neigh_release(neigh); } - if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID))) + if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID))) { + rcu_read_lock(); neigh_event_send(dst_get_neighbour(&rt->dst), NULL); - + rcu_read_unlock(); + } ip_rt_put(rt); return rc; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7567b60..ef38848 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -555,6 +555,7 @@ static int path_rec_start(struct net_device *dev, return 0; } +/* called with rcu_read_lock */ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -636,6 +637,7 @@ err_drop: spin_unlock_irqrestore(&priv->lock, flags); } +/* called with rcu_read_lock */ static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(skb->dev); @@ -720,13 +722,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) struct neighbour *n = NULL; unsigned long flags; + rcu_read_lock(); if (likely(skb_dst(skb))) n = dst_get_neighbour(skb_dst(skb)); if (likely(n)) { if (unlikely(!*to_ipoib_neigh(n))) { ipoib_path_lookup(skb, dev); - return NETDEV_TX_OK; + goto unlock; } neigh = *to_ipoib_neigh(n); @@ -749,17 +752,17 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) ipoib_neigh_free(dev, neigh); spin_unlock_irqrestore(&priv->lock, flags); ipoib_path_lookup(skb, dev); - return NETDEV_TX_OK; + goto unlock; } if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); - return NETDEV_TX_OK; + goto unlock; } } else if (neigh->ah) { ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(n->ha)); - return NETDEV_TX_OK; + goto unlock; } if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { @@ -793,13 +796,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) phdr->hwaddr + 4); dev_kfree_skb_any(skb); ++dev->stats.tx_dropped; - return NETDEV_TX_OK; + goto unlock; } unicast_arp_send(skb, dev, phdr); } } - +unlock: + rcu_read_unlock(); return NETDEV_TX_OK; } @@ -837,7 +841,7 @@ static int ipoib_hard_header(struct sk_buff *skb, dst = skb_dst(skb); n = NULL; if (dst) - n = dst_get_neighbour(dst); + n = dst_get_neighbour_raw(dst); if ((!dst || !n) && daddr) { struct ipoib_pseudoheader *phdr = (struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 1b7a976..cad1894 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -266,7 +266,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, skb->dev = dev; if (dst) - n = dst_get_neighbour(dst); + n = dst_get_neighbour_raw(dst); if (!dst || !n) { /* put pseudoheader back on for next time */ skb_push(skb, sizeof (struct ipoib_pseudoheader)); @@ -722,6 +722,8 @@ out: if (mcast && mcast->ah) { struct dst_entry *dst = skb_dst(skb); struct neighbour *n = NULL; + + rcu_read_lock(); if (dst) n = dst_get_neighbour(dst); if (n && !*to_ipoib_neigh(n)) { @@ -734,7 +736,7 @@ out: list_add_tail(&neigh->list, &mcast->neigh_list); } } - + rcu_read_unlock(); spin_unlock_irqrestore(&priv->lock, flags); ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN); return; -- cgit v0.10.2 From 1281bc256543eb610b14fa95ce1967397931a120 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 29 Nov 2011 10:10:54 +0000 Subject: netlabel: Fix build problems when IPv6 is not enabled A recent fix to the the NetLabel code caused build problem with configurations that did not have IPv6 enabled; see below: netlabel_kapi.c: In function 'netlbl_cfg_unlbl_map_add': netlabel_kapi.c:165:4: error: implicit declaration of function 'netlbl_af6list_add' This patch fixes this problem by making the IPv6 specific code conditional on the IPv6 configuration flags as we done in the rest of NetLabel and the network stack as a whole. We have to move some variable declarations around as a result so things may not be quite as pretty, but at least it builds cleanly now. Some additional IPv6 conditionals were added to the NetLabel code as well for the sake of consistency. Reported-by: Randy Dunlap Signed-off-by: Paul Moore Acked-by: Randy Dunlap Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 7b372a7..824f184 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -111,8 +111,6 @@ int netlbl_cfg_unlbl_map_add(const char *domain, struct netlbl_domaddr_map *addrmap = NULL; struct netlbl_domaddr4_map *map4 = NULL; struct netlbl_domaddr6_map *map6 = NULL; - const struct in_addr *addr4, *mask4; - const struct in6_addr *addr6, *mask6; entry = kzalloc(sizeof(*entry), GFP_ATOMIC); if (entry == NULL) @@ -133,9 +131,9 @@ int netlbl_cfg_unlbl_map_add(const char *domain, INIT_LIST_HEAD(&addrmap->list6); switch (family) { - case AF_INET: - addr4 = addr; - mask4 = mask; + case AF_INET: { + const struct in_addr *addr4 = addr; + const struct in_addr *mask4 = mask; map4 = kzalloc(sizeof(*map4), GFP_ATOMIC); if (map4 == NULL) goto cfg_unlbl_map_add_failure; @@ -148,9 +146,11 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; - case AF_INET6: - addr6 = addr; - mask6 = mask; + } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: { + const struct in6_addr *addr6 = addr; + const struct in6_addr *mask6 = mask; map6 = kzalloc(sizeof(*map6), GFP_ATOMIC); if (map6 == NULL) goto cfg_unlbl_map_add_failure; @@ -167,6 +167,8 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; + } +#endif /* IPv6 */ default: goto cfg_unlbl_map_add_failure; break; @@ -225,9 +227,11 @@ int netlbl_cfg_unlbl_static_add(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } @@ -266,9 +270,11 @@ int netlbl_cfg_unlbl_static_del(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } -- cgit v0.10.2 From 746ae30f821a8533ffba7769e492f59a96fdbeec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:41:49 +0000 Subject: isdn: make sure strings are null terminated These strings come from the user. We strcpy() them inside cf_command() so we should check that they are NULL terminated and return an error if not. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c index 33ec9e4..9021182 100644 --- a/drivers/isdn/divert/divert_procfs.c +++ b/drivers/isdn/divert/divert_procfs.c @@ -242,6 +242,12 @@ static int isdn_divert_ioctl_unlocked(struct file *file, uint cmd, ulong arg) case IIOCDOCFINT: if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid)) return (-EINVAL); /* invalid driver */ + if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) == + sizeof(dioctl.cf_ctrl.msn)) + return -EINVAL; + if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) == + sizeof(dioctl.cf_ctrl.fwd_nr)) + return -EINVAL; if ((i = cf_command(dioctl.cf_ctrl.drvid, (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2, dioctl.cf_ctrl.cfproc, -- cgit v0.10.2 From 5dc5503f5a400be5a7dc611745a034f04b0679b8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:42:09 +0000 Subject: isdn: avoid copying too long drvid "cfg->drvid" comes from the user so there is a possibility they didn't NUL terminate it properly. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 1f73d7f..2339d73 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -2756,6 +2756,9 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg) char *c, *e; + if (strnlen(cfg->drvid, sizeof(cfg->drvid)) == + sizeof(cfg->drvid)) + return -EINVAL; drvidx = -1; chidx = -1; strcpy(drvid, cfg->drvid); -- cgit v0.10.2 From 33dbc27f1ab3a37d04a8d226327fb3d384870e43 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 30 Sep 2011 08:55:50 +1000 Subject: drm/nouveau: add dumb ioctl support Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index ddbabef..b12fd2c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -369,3 +369,48 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, spin_unlock_irqrestore(&dev->event_lock, flags); return 0; } + +int +nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct nouveau_bo *bo; + int ret; + + args->pitch = roundup(args->width * (args->bpp / 8), 256); + args->size = args->pitch * args->height; + args->size = roundup(args->size, PAGE_SIZE); + + ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo); + if (ret) + return ret; + + ret = drm_gem_handle_create(file_priv, bo->gem, &args->handle); + drm_gem_object_unreference_unlocked(bo->gem); + return ret; +} + +int +nouveau_display_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle) +{ + return drm_gem_handle_delete(file_priv, handle); +} + +int +nouveau_display_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle, uint64_t *poffset) +{ + struct drm_gem_object *gem; + + gem = drm_gem_object_lookup(dev, file_priv, handle); + if (gem) { + struct nouveau_bo *bo = gem->driver_private; + *poffset = bo->bo.addr_space_offset; + drm_gem_object_unreference_unlocked(gem); + return 0; + } + + return -ENOENT; +} diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 9f7bb12..9791d13 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -433,6 +433,10 @@ static struct drm_driver driver = { .gem_open_object = nouveau_gem_object_open, .gem_close_object = nouveau_gem_object_close, + .dumb_create = nouveau_display_dumb_create, + .dumb_map_offset = nouveau_display_dumb_map_offset, + .dumb_destroy = nouveau_display_dumb_destroy, + .name = DRIVER_NAME, .desc = DRIVER_DESC, #ifdef GIT_REVISION diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 29837da..4c0be3a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1418,6 +1418,12 @@ int nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event); int nouveau_finish_page_flip(struct nouveau_channel *, struct nouveau_page_flip_state *); +int nouveau_display_dumb_create(struct drm_file *, struct drm_device *, + struct drm_mode_create_dumb *args); +int nouveau_display_dumb_map_offset(struct drm_file *, struct drm_device *, + uint32_t handle, uint64_t *offset); +int nouveau_display_dumb_destroy(struct drm_file *, struct drm_device *, + uint32_t handle); /* nv10_gpio.c */ int nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag); -- cgit v0.10.2 From ffe2dee49023c2a47ef7e177ceb22ec6bcaecc11 Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Fri, 11 Nov 2011 20:47:58 +0100 Subject: drm/nvc0/gr: fix TP init for transform feedback offset queries Without this, they return bytes written since the last update of the offset, but we want the full offset. Trace shows setting this on GPC[0]/TP[0] is enough. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index a74e501..ecfafd7 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -381,6 +381,8 @@ nvc0_graph_init_gpc_0(struct drm_device *dev) u8 tpnr[GPC_MAX]; int i, gpc, tpc; + nv_wr32(dev, TP_UNIT(0, 0, 0x5c), 1); /* affects TFB offset queries */ + /* * TP ROP UNKVAL(magic_not_rop_nr) * 450: 4/0/0/0 2 3 -- cgit v0.10.2 From 26cfa81357b67229f71d25b53cbfbdfb83a38bdf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 17 Nov 2011 09:10:02 +1000 Subject: drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index 23d63b4..cb006a7 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -780,7 +780,7 @@ nvd0_sor_dpms(struct drm_encoder *encoder, int mode) continue; if (nv_partner != nv_encoder && - nv_partner->dcb->or == nv_encoder->or) { + nv_partner->dcb->or == nv_encoder->dcb->or) { if (nv_partner->last_dpms == DRM_MODE_DPMS_ON) return; break; -- cgit v0.10.2 From 1a97b4ace09d7d3fe213a73bc466ca33af98c91c Mon Sep 17 00:00:00 2001 From: Younes Manton Date: Tue, 22 Nov 2011 14:58:31 -0500 Subject: drm/nouveau: Keep RAMIN heap within the channel. The entire RAMIN is allocated to be 'size', but the heap is specified as 'base' + 'size' inside RAMIN, so it will overflow past RAMIN by 'base' bytes on NV50+ and clobber other allocatons unless it's size is adjusted. Signed-off-by: Younes Manton Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 02222c5..960c0ae 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -680,7 +680,7 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan) return ret; } - ret = drm_mm_init(&chan->ramin_heap, base, size); + ret = drm_mm_init(&chan->ramin_heap, base, size - base); if (ret) { NV_ERROR(dev, "Error creating PRAMIN heap: %d\n", ret); nouveau_gpuobj_ref(NULL, &chan->ramin); -- cgit v0.10.2 From a10e9e1dbb39970f232b1e2b0e4f738e2d77079f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 25 Nov 2011 16:35:34 +1000 Subject: drm/nouveau: fix oopses caused by clear being called on unpopulated ttms Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index b75258a..c8a463b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -67,7 +67,10 @@ nouveau_sgdma_clear(struct ttm_backend *be) pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); } + nvbe->unmap_pages = false; } + + nvbe->pages = NULL; } static void -- cgit v0.10.2 From a55b68e06b593ef7311f4a1cf9d3ae349ef7e9ed Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 9 Nov 2011 15:30:08 +1000 Subject: drm/nv50/disp: silence compiler warning NFI why this only started appearing now. The use of the uninitialised var can't actually happen, so perhaps my compiler just got stupider. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index d23ca00..06de250 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -616,7 +616,7 @@ nv50_display_unk10_handler(struct drm_device *dev) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), mc; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); disp->irq.dcb = NULL; @@ -708,7 +708,7 @@ nv50_display_unk20_handler(struct drm_device *dev) struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), tmp, pclk, script, mc = 0; struct dcb_entry *dcb; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); dcb = disp->irq.dcb; -- cgit v0.10.2 From 2984ff38ccf6cbc02a7a996a36c7d6f69f3c6146 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Wed, 30 Nov 2011 15:47:48 +0100 Subject: cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails If we fail allocating the blkpg stats, we free cfqd and cfgq. But we need to free the IDA cfqd->cic_index as well. Signed-off-by: majianpeng Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 16ace89..3beed83 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -4036,6 +4036,11 @@ static void *cfq_init_queue(struct request_queue *q) if (blkio_alloc_blkg_stats(&cfqg->blkg)) { kfree(cfqg); + + spin_lock(&cic_index_lock); + ida_remove(&cic_index_ida, cfqd->cic_index); + spin_unlock(&cic_index_lock); + kfree(cfqd); return NULL; } -- cgit v0.10.2 From 1808958d27b1250295f01dff4997d8a8814adaab Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 28 Nov 2011 12:53:08 +0100 Subject: ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: stable diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f6..0d20677 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), -- cgit v0.10.2 From 0e934e22f3fabb98c41737e2e30bd9db2668e935 Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Wed, 30 Nov 2011 08:47:44 +0100 Subject: ARM: at91: Fix USB AT91 gadget registration Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register at91_udc anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Anders Darander Signed-off-by: Nicolas Ferre Cc: stable diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa..ad93068 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464..629fa97 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d..a178b58 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb..d5fbac9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { -- cgit v0.10.2 From 26bdef541d26fd6a5ddffdf8949ace22f94f809f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Nov 2011 11:28:01 +0300 Subject: btrfs scrub: handle -ENOMEM from init_ipath() init_ipath() can return an ERR_PTR(-ENOMEM). Signed-off-by: Dan Carpenter diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index fab420d..c27bcb6 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -256,6 +256,11 @@ static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx) btrfs_release_path(swarn->path); ipath = init_ipath(4096, local_root, swarn->path); + if (IS_ERR(ipath)) { + ret = PTR_ERR(ipath); + ipath = NULL; + goto err; + } ret = paths_from_inode(inum, ipath); if (ret < 0) -- cgit v0.10.2 From b52f75a595e8a70ee453bd6fb8023ee294f7a729 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Wed, 16 Nov 2011 17:35:37 +0100 Subject: Fix URL of btrfs-progs git repository in docs The location of the btrfs-progs repository has been changed. This patch updates the documentation accordingly. Signed-off-by: Arnd Hannemann diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index 64087c3..7671352 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -63,8 +63,8 @@ IRC network. Userspace tools for creating and manipulating Btrfs file systems are available from the git repository at the following location: - http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git - git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git + http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git + git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git These include the following tools: -- cgit v0.10.2 From aa38a711a893accf5b5192f3d705a120deaa81e0 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 18 Nov 2011 17:43:00 +0800 Subject: Btrfs: fix deadlock on metadata reservation when evicting a inode When I ran the xfstests, I found the test tasks was blocked on meta-data reservation. By debugging, I found the reason of this bug: start transaction | v reserve meta-data space | v flush delay allocation -> iput inode -> evict inode ^ | | v wait for delay allocation flush <- reserve meta-data space And besides that, the flush on evicting inode will block the thread, which is reclaiming the memory, and make oom happen easily. Fix this bug by skipping the flush step when evicting inode. Signed-off-by: Miao Xie diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 04a5dfc..50634abe 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2369,6 +2369,9 @@ int btrfs_block_rsv_check(struct btrfs_root *root, int btrfs_block_rsv_refill(struct btrfs_root *root, struct btrfs_block_rsv *block_rsv, u64 min_reserved); +int btrfs_block_rsv_refill_noflush(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved); int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv, struct btrfs_block_rsv *dst_rsv, u64 num_bytes); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 5d86877..b7e5f68 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3887,9 +3887,9 @@ int btrfs_block_rsv_check(struct btrfs_root *root, return ret; } -int btrfs_block_rsv_refill(struct btrfs_root *root, - struct btrfs_block_rsv *block_rsv, - u64 min_reserved) +static inline int __btrfs_block_rsv_refill(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved, int flush) { u64 num_bytes = 0; int ret = -ENOSPC; @@ -3908,7 +3908,7 @@ int btrfs_block_rsv_refill(struct btrfs_root *root, if (!ret) return 0; - ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1); + ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush); if (!ret) { block_rsv_add_bytes(block_rsv, num_bytes, 0); return 0; @@ -3917,6 +3917,20 @@ int btrfs_block_rsv_refill(struct btrfs_root *root, return ret; } +int btrfs_block_rsv_refill(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved) +{ + return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 1); +} + +int btrfs_block_rsv_refill_noflush(struct btrfs_root *root, + struct btrfs_block_rsv *block_rsv, + u64 min_reserved) +{ + return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 0); +} + int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv, struct btrfs_block_rsv *dst_rsv, u64 num_bytes) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8ad26b1..c5ccec2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3490,7 +3490,7 @@ void btrfs_evict_inode(struct inode *inode) * doing the truncate. */ while (1) { - ret = btrfs_block_rsv_refill(root, rsv, min_size); + ret = btrfs_block_rsv_refill_noflush(root, rsv, min_size); /* * Try and steal from the global reserve since we will -- cgit v0.10.2 From ece7d20e8be6730fbb29f4550de6b19b1a3a9387 Mon Sep 17 00:00:00 2001 From: Mike Fleetwood Date: Fri, 18 Nov 2011 18:55:01 +0000 Subject: Btrfs: Don't error on resizing FS to same size It seems overly harsh to fail a resize of a btrfs file system to the same size when a shrink or grow would succeed. User app GParted trips over this error. Allow it by bypassing the shrink or grow operation. Signed-off-by: Mike Fleetwood diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a90e749..72d4616 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1278,7 +1278,7 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, } ret = btrfs_grow_device(trans, device, new_size); btrfs_commit_transaction(trans, root); - } else { + } else if (new_size < old_size) { ret = btrfs_shrink_device(device, new_size); } -- cgit v0.10.2 From b772a86ea6d932ac29d5e50e67c977653c832f8a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 28 Nov 2011 16:43:00 +0800 Subject: Btrfs: fix oops when calling statfs on readonly device To reproduce this bug: # dd if=/dev/zero of=img bs=1M count=256 # mkfs.btrfs img # losetup -r /dev/loop1 img # mount /dev/loop1 /mnt OOPS!! It triggered BUG_ON(!nr_devices) in btrfs_calc_avail_data_space(). To fix this, instead of checking write-only devices, we check all open deivces: # df -h /dev/loop1 Filesystem Size Used Avail Use% Mounted on /dev/loop1 250M 28K 238M 1% /mnt Signed-off-by: Li Zefan diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 8bd9d6d..1a3ce9e 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1083,7 +1083,7 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) int i = 0, nr_devices; int ret; - nr_devices = fs_info->fs_devices->rw_devices; + nr_devices = fs_info->fs_devices->open_devices; BUG_ON(!nr_devices); devices_info = kmalloc(sizeof(*devices_info) * nr_devices, @@ -1105,8 +1105,8 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) else min_stripe_size = BTRFS_STRIPE_LEN; - list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) { - if (!device->in_fs_metadata) + list_for_each_entry(device, &fs_devices->devices, dev_list) { + if (!device->in_fs_metadata || !device->bdev) continue; avail_space = device->total_bytes - device->bytes_used; -- cgit v0.10.2 From f2d0f6765d6332f9be732965a0c6f3b8a55082b4 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Mon, 28 Nov 2011 12:04:43 -0200 Subject: Btrfs: initialize new bitmaps' list We're failing to create clusters with bitmaps because setup_cluster_no_bitmap checks that the list is empty before inserting the bitmap entry in the list for setup_cluster_bitmap, but the list field is only initialized when it is restored from the on-disk free space cache, or when it is written out to disk. Besides a potential race condition due to the multiple use of the list field, filesystem performance severely degrades over time: as we use up all non-bitmap free extents, the try-to-set-up-cluster dance is done at every metadata block allocation. For every block group, we fail to set up a cluster, and after failing on them all up to twice, we fall back to the much slower unclustered allocation. To make matters worse, before the unclustered allocation, we try to create new block groups until we reach the 1% threshold, which introduces additional bitmaps and thus block groups that we'll iterate over at each metadata block request. diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6e5b7e4..ff179b1 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1470,6 +1470,7 @@ static void add_new_bitmap(struct btrfs_free_space_ctl *ctl, { info->offset = offset_to_bitmap(ctl, offset); info->bytes = 0; + INIT_LIST_HEAD(&info->list); link_free_space(ctl, info); ctl->total_bitmaps++; -- cgit v0.10.2 From b78d09bceb524ee6481c21b77bda22d766b10e6a Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: reset cluster's max_size when creating bitmap The field that indicates the size of the largest contiguous chunk of free space in the cluster is not initialized when setting up bitmaps, it's only increased when we find a larger contiguous chunk. We end up retaining a larger value than appropriate for highly-fragmented clusters, which may cause pointless searches for large contiguous groups, and even cause clusters that do not meet the density requirements to be set up. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index ff179b1..ec23d43 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2320,6 +2320,7 @@ again: if (!found) { start = i; + cluster->max_size = 0; found = true; } -- cgit v0.10.2 From 1b22bad779be7fe07242be04749ec969164528b8 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: start search for new cluster at the beginning Instead of starting at zero (offset is always zero), request a cluster starting at search_start, that denotes the beginning of the current block group. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index b7e5f68..97c1206 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5301,10 +5301,8 @@ alloc: spin_lock(&last_ptr->refill_lock); if (last_ptr->block_group && (last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data))) { - offset = 0; + !block_group_bits(last_ptr->block_group, data))) goto refill_cluster; - } offset = btrfs_alloc_from_cluster(block_group, last_ptr, num_bytes, search_start); @@ -5355,7 +5353,7 @@ refill_cluster: /* allocate a cluster in this block group */ ret = btrfs_find_space_cluster(trans, root, block_group, last_ptr, - offset, num_bytes, + search_start, num_bytes, empty_cluster + empty_size); if (ret == 0) { /* -- cgit v0.10.2 From 425d83156ca27f74e2cc3f370138038c3c8947f8 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: skip block groups without enough space for a cluster We test whether a block group has enough free space to hold the requested block, but when we're doing clustered allocation, we can save some cycles by testing whether it has enough room for the cluster upfront, otherwise we end up attempting to set up a cluster and failing. Only in the NO_EMPTY_SIZE loop do we attempt an unclustered allocation, and by then we'll have zeroed the cluster size, so this patch won't stop us from using the block group as a last resort. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 97c1206..71c8e70 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5278,7 +5278,7 @@ alloc: spin_lock(&block_group->free_space_ctl->tree_lock); if (cached && block_group->free_space_ctl->free_space < - num_bytes + empty_size) { + num_bytes + empty_cluster + empty_size) { spin_unlock(&block_group->free_space_ctl->tree_lock); goto loop; } -- cgit v0.10.2 From be064d113906f04ea13088a8260e1e68ae0a4050 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 30 Nov 2011 13:43:00 -0500 Subject: Btrfs: skip allocation attempt from empty cluster If we don't have a cluster, don't bother trying to allocate from it, jumping right away to the attempt to allocate a new cluster. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 71c8e70..813c6bb 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5299,9 +5299,9 @@ alloc: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); - if (last_ptr->block_group && - (last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data))) + if (!last_ptr->block_group || + last_ptr->block_group->ro || + !block_group_bits(last_ptr->block_group, data)) goto refill_cluster; offset = btrfs_alloc_from_cluster(block_group, last_ptr, -- cgit v0.10.2 From a042994dd377d86bff9446ee76151ceb6267c9ba Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 28 Nov 2011 16:47:15 -0500 Subject: cfg80211: fix race on init and driver registration There is a theoretical race that if hit will trigger a crash. The race is between when we issue the first regulatory hint, regulatory_hint_core(), gets processed by the workqueue and between when the first device gets registered to the wireless core. This is not easy to reproduce but it was easy to do so through the regulatory simulator I have been working on. This is a port of the fix I implemented there [1]. [1] https://github.com/mcgrof/regsim/commit/a246ccf81f059cb662eee288aa13100f631e4cc8 Cc: stable@vger.kernel.org Cc: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 186b7f2..0ec4071 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -55,8 +55,17 @@ #define REG_DBG_PRINT(args...) #endif +static struct regulatory_request core_request_world = { + .initiator = NL80211_REGDOM_SET_BY_CORE, + .alpha2[0] = '0', + .alpha2[1] = '0', + .intersect = false, + .processed = true, + .country_ie_env = ENVIRON_ANY, +}; + /* Receipt of information from last regulatory request */ -static struct regulatory_request *last_request; +static struct regulatory_request *last_request = &core_request_world; /* To trigger userspace events */ static struct platform_device *reg_pdev; @@ -148,7 +157,7 @@ static char user_alpha2[2]; module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -static void reset_regdomains(void) +static void reset_regdomains(bool full_reset) { /* avoid freeing static information or freeing something twice */ if (cfg80211_regdomain == cfg80211_world_regdom) @@ -163,6 +172,13 @@ static void reset_regdomains(void) cfg80211_world_regdom = &world_regdom; cfg80211_regdomain = NULL; + + if (!full_reset) + return; + + if (last_request != &core_request_world) + kfree(last_request); + last_request = &core_request_world; } /* @@ -173,7 +189,7 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { BUG_ON(!last_request); - reset_regdomains(); + reset_regdomains(false); cfg80211_world_regdom = rd; cfg80211_regdomain = rd; @@ -1405,7 +1421,8 @@ static int __regulatory_hint(struct wiphy *wiphy, } new_request: - kfree(last_request); + if (last_request != &core_request_world) + kfree(last_request); last_request = pending_request; last_request->intersect = intersect; @@ -1575,9 +1592,6 @@ static int regulatory_hint_core(const char *alpha2) { struct regulatory_request *request; - kfree(last_request); - last_request = NULL; - request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -1775,7 +1789,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(); + reset_regdomains(true); restore_alpha2(alpha2, reset_user); /* @@ -2044,7 +2058,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) int r; if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = rd; return 0; } @@ -2065,7 +2079,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (r) return r; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = rd; return 0; } @@ -2090,7 +2104,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) rd = NULL; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = intersected_rd; return 0; @@ -2110,7 +2124,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) kfree(rd); rd = NULL; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = intersected_rd; return 0; @@ -2263,11 +2277,8 @@ void /* __init_or_exit */ regulatory_exit(void) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(); - - kfree(last_request); + reset_regdomains(true); - last_request = NULL; dev_set_uevent_suppress(®_pdev->dev, true); platform_device_unregister(reg_pdev); -- cgit v0.10.2 From 0bac71af6e66dc798bf07d0c0dd14ee5503362f9 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 28 Nov 2011 16:47:16 -0500 Subject: cfg80211: amend regulatory NULL dereference fix Johannes' patch for "cfg80211: fix regulatory NULL dereference" broke user regulaotry hints and it did not address the fact that last_request was left populated even if the previous regulatory hint was stale due to the wiphy disappearing. Fix user reguluatory hints by only bailing out if for those regulatory hints where a request_wiphy is expected. The stale last_request considerations are addressed through the previous fixes on last_request where we reset the last_request to a static world regdom request upon reset_regdomains(). In this case though we further enhance the effect by simply restoring reguluatory settings completely. Cc: stable@vger.kernel.org Cc: Johannes Berg Signed-off-by: Luis R. Rodriguez Reviewed-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 0ec4071..074c112 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2049,8 +2049,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); - if (!request_wiphy) { - reg_set_request_processed(); + if (!request_wiphy && + (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || + last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { + schedule_delayed_work(®_timeout, 0); return -ENODEV; } -- cgit v0.10.2 From c72e8d335e2c6a309b6281f2abcf491f37b8b92b Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 30 Nov 2011 16:56:30 +0100 Subject: mac80211: fill rate filter for internal scan requests The rates bitmap for internal scan requests shoud be filled, otherwise there will be probe requests with zero rates supported. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index d999bf3..cae4435 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,12 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (!local->int_scan_req) return -ENOMEM; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + local->int_scan_req->rates[band] = (u32) -1; + } + /* if low-level driver supports AP, we also support VLAN */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); -- cgit v0.10.2 From 15fc1f3617edea50fa58703d59f73e726377bc63 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 30 Nov 2011 17:07:21 -0500 Subject: net: fec: Select the FEC driver by default for i.MX SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam Suggested-by: Uwe Kleine-König Acked-by: Uwe Kleine-König Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index c520cfd..5272f9d 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -24,6 +24,7 @@ config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ ARCH_MXC || ARCH_MXS) + default ARCH_MXC || ARCH_MXS if ARM select PHYLIB ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet -- cgit v0.10.2 From f7e57044eeb1841847c24aa06766c8290c202583 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 04:08:58 +0000 Subject: sch_teql: fix lockdep splat We need rcu_read_lock() protection before using dst_get_neighbour(), and we must cache its value (pass it to __teql_resolve()) teql_master_xmit() is called under rcu_read_lock_bh() protection, its not enough. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index a3b7120..4f4c52c 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -225,11 +225,11 @@ static int teql_qdisc_init(struct Qdisc *sch, struct nlattr *opt) static int -__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev) +__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, + struct net_device *dev, struct netdev_queue *txq, + struct neighbour *mn) { - struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0); - struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc); - struct neighbour *mn = dst_get_neighbour(skb_dst(skb)); + struct teql_sched_data *q = qdisc_priv(txq->qdisc); struct neighbour *n = q->ncache; if (mn->tbl == NULL) @@ -262,17 +262,26 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device * } static inline int teql_resolve(struct sk_buff *skb, - struct sk_buff *skb_res, struct net_device *dev) + struct sk_buff *skb_res, + struct net_device *dev, + struct netdev_queue *txq) { - struct netdev_queue *txq = netdev_get_tx_queue(dev, 0); + struct dst_entry *dst = skb_dst(skb); + struct neighbour *mn; + int res; + if (txq->qdisc == &noop_qdisc) return -ENODEV; - if (dev->header_ops == NULL || - skb_dst(skb) == NULL || - dst_get_neighbour(skb_dst(skb)) == NULL) + if (!dev->header_ops || !dst) return 0; - return __teql_resolve(skb, skb_res, dev); + + rcu_read_lock(); + mn = dst_get_neighbour(dst); + res = mn ? __teql_resolve(skb, skb_res, dev, txq, mn) : 0; + rcu_read_unlock(); + + return res; } static netdev_tx_t teql_master_xmit(struct sk_buff *skb, struct net_device *dev) @@ -307,7 +316,7 @@ restart: continue; } - switch (teql_resolve(skb, skb_res, slave)) { + switch (teql_resolve(skb, skb_res, slave, slave_txq)) { case 0: if (__netif_tx_trylock(slave_txq)) { unsigned int length = qdisc_pkt_len(skb); -- cgit v0.10.2 From 218fa90f072e4aeff9003d57e390857f4f35513e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 29 Nov 2011 20:05:55 +0000 Subject: ipv4: fix lockdep splat in rt_cache_seq_show After commit f2c31e32b378 (fix NULL dereferences in check_peer_redir()), dst_get_neighbour() should be guarded by rcu_read_lock() / rcu_read_unlock() section. Reported-by: Miles Lane Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 5c28472..57e01bc 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -417,9 +417,13 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) else { struct rtable *r = v; struct neighbour *n; - int len; + int len, HHUptod; + rcu_read_lock(); n = dst_get_neighbour(&r->dst); + HHUptod = (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0; + rcu_read_unlock(); + seq_printf(seq, "%s\t%08X\t%08X\t%8X\t%d\t%u\t%d\t" "%08X\t%d\t%u\t%u\t%02X\t%d\t%1d\t%08X%n", r->dst.dev ? r->dst.dev->name : "*", @@ -433,7 +437,7 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) dst_metric(&r->dst, RTAX_RTTVAR)), r->rt_key_tos, -1, - (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0, + HHUptod, r->rt_spec_dst, &len); seq_printf(seq, "%*s\n", 127 - len, ""); -- cgit v0.10.2 From 14383c295ab48178c449336f5d74e9e615e36723 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:14:35 +0100 Subject: ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index fc82de8..edf9ad8 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -550,7 +550,7 @@ void kprobe_arm_test_cases(void) TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") - TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"") + TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"") TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"") TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!") -- cgit v0.10.2 From b5bed7fe801d1460424b7aeb6b06464e23d2a1e6 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Tue, 29 Nov 2011 08:16:02 +0100 Subject: ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm Tested-by: Leif Lindholm Acked-by: Nicolas Pitre Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c index 9fe8910..8a30c89 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/kernel/kprobes-arm.c @@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = { static const union decode_item arm_cccc_0001_____1001_table[] = { /* Synchronization primitives */ +#if __LINUX_ARM_ARCH__ < 6 + /* Deprecated on ARMv6 and may be UNDEFINED on v7 */ /* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */ DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc, REGS(NOPC, NOPC, 0, 0, NOPC)), - +#endif /* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */ /* And unallocated instructions... */ DECODE_END diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index edf9ad8..ba32b39 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void) TEST_GROUP("Synchronization primitives") - /* - * Use hard coded constants for SWP instructions to avoid warnings - * about deprecated instructions. - */ - TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]") - TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvs r0, r",1,VAL1,", [sp]") + TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]") +#else + TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]") + TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]") +#endif TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]") TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]") - TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]") - TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]") +#if __LINUX_ARM_ARCH__ < 6 + TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]") + TEST_R( "swpvsb r0, r",1,VAL1,", [sp]") +#else + TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]") + TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]") +#endif TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]") TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */ -- cgit v0.10.2 From 4cbd6b167f9ed756ced970e0a95538f60ae3b9ab Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Tue, 29 Nov 2011 15:50:20 +0100 Subject: ARM: 7182/1: ARM cpu topology: fix warning kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: Signed-off-by: Vincent Guittot Signed-off-by: Russell King diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index a7e457e..58b8b84 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS]; void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); -const struct cpumask *cpu_coregroup_mask(unsigned int cpu); +const struct cpumask *cpu_coregroup_mask(int cpu); #else diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 1040c00..8200dea 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -43,7 +43,7 @@ struct cputopo_arm cpu_topology[NR_CPUS]; -const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_topology[cpu].core_sibling; } -- cgit v0.10.2 From 917fbdb32f37e9a93b00bb12ee83532982982df3 Mon Sep 17 00:00:00 2001 From: Henrik Saavedra Persson Date: Wed, 23 Nov 2011 23:37:15 +0000 Subject: bonding: only use primary address for ARP Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b0c5772..7f87568 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2553,30 +2553,6 @@ re_arm: } } -static __be32 bond_glean_dev_ip(struct net_device *dev) -{ - struct in_device *idev; - struct in_ifaddr *ifa; - __be32 addr = 0; - - if (!dev) - return 0; - - rcu_read_lock(); - idev = __in_dev_get_rcu(dev); - if (!idev) - goto out; - - ifa = idev->ifa_list; - if (!ifa) - goto out; - - addr = ifa->ifa_local; -out: - rcu_read_unlock(); - return addr; -} - static int bond_has_this_ip(struct bonding *bond, __be32 ip) { struct vlan_entry *vlan; @@ -3322,6 +3298,10 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, struct bonding *bond; struct vlan_entry *vlan; + /* we only care about primary address */ + if(ifa->ifa_flags & IFA_F_SECONDARY) + return NOTIFY_DONE; + list_for_each_entry(bond, &bn->dev_list, bond_list) { if (bond->dev == event_dev) { switch (event) { @@ -3329,7 +3309,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, bond->master_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - bond->master_ip = bond_glean_dev_ip(bond->dev); + bond->master_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; @@ -3345,8 +3325,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, vlan->vlan_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - vlan->vlan_ip = - bond_glean_dev_ip(vlan_dev); + vlan->vlan_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; -- cgit v0.10.2 From ea6a5d3b97b768561db6358f15e4c84ced0f4f7e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 12:10:53 +0000 Subject: sch_red: fix red_calc_qavg_from_idle_time Since commit a4a710c4a7490587 (pkt_sched: Change PSCHED_SHIFT from 10 to 6) it seems RED/GRED are broken. red_calc_qavg_from_idle_time() computes a delay in us units, but this delay is now 16 times bigger than real delay, so the final qavg result smaller than expected. Use standard kernel time services since there is no need to obfuscate them. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/red.h b/include/net/red.h index 3319f16..b72a3b8 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -116,7 +116,7 @@ struct red_parms { u32 qR; /* Cached random number */ unsigned long qavg; /* Average queue length: A scaled */ - psched_time_t qidlestart; /* Start of current idle period */ + ktime_t qidlestart; /* Start of current idle period */ }; static inline u32 red_rmask(u8 Plog) @@ -148,17 +148,17 @@ static inline void red_set_parms(struct red_parms *p, static inline int red_is_idling(struct red_parms *p) { - return p->qidlestart != PSCHED_PASTPERFECT; + return p->qidlestart.tv64 != 0; } static inline void red_start_of_idle_period(struct red_parms *p) { - p->qidlestart = psched_get_time(); + p->qidlestart = ktime_get(); } static inline void red_end_of_idle_period(struct red_parms *p) { - p->qidlestart = PSCHED_PASTPERFECT; + p->qidlestart.tv64 = 0; } static inline void red_restart(struct red_parms *p) @@ -170,13 +170,10 @@ static inline void red_restart(struct red_parms *p) static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p) { - psched_time_t now; - long us_idle; + s64 delta = ktime_us_delta(ktime_get(), p->qidlestart); + long us_idle = min_t(s64, delta, p->Scell_max); int shift; - now = psched_get_time(); - us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max); - /* * The problem: ideally, average length queue recalcultion should * be done over constant clock intervals. This is too expensive, so -- cgit v0.10.2 From 8f891489866ec62a87494eff3ed17c88152c32d4 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Wed, 30 Nov 2011 23:43:07 -0500 Subject: net/core: fix rollback handler in register_netdevice_notifier Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 1482eea..5a13edf 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1396,7 +1396,7 @@ rollback: for_each_net(net) { for_each_netdev(net, dev) { if (dev == last) - break; + goto outroll; if (dev->flags & IFF_UP) { nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); @@ -1407,6 +1407,7 @@ rollback: } } +outroll: raw_notifier_chain_unregister(&netdev_chain, nb); goto unlock; } -- cgit v0.10.2 From 2a3267a489f1dc4284b64a4b88c62011946dc7ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:35:29 +0800 Subject: arm/imx: fix return type of callback passed to of_irq_init() The of_irq_init() expects the callback passed by .data of of_device_id return 'int' instead of 'void'. This patch fixes it to have irq_init_cb() return the correct value, and in turn have the secondary interrupt controller (gpio in this case) initialized properly and also eliminate the error message 'of_irq_init: children remain, but no parents' which was overlooked before. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa3..eb7531b 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -36,7 +36,7 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -44,6 +44,8 @@ static void __init imx6q_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc6158..3451a46 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,13 +44,14 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -58,6 +59,8 @@ static void __init imx51_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b8..022bc03 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,13 +48,14 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -62,6 +63,8 @@ static void __init imx53_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { -- cgit v0.10.2 From 04aafd713bae8a75933c7821dc012b0ec9046bca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:49:29 +0800 Subject: arm/imx: fix irq_base for gpio When gpio core dynamically allocate gpio number for a port, it starts from the end of the total range, 0 ~ ARCH_NR_GPIOS. That said, the earlier a port gets probed, the bigger gpio number it gets assigned. To match this, the irq_base for gpio should be assigned from 'MXC_GPIO_IRQ_START + ARCH_NR_GPIOS' decreasingly. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index eb7531b..22aa54a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -39,11 +39,10 @@ static void __init imx6q_map_io(void) static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index 3451a46..596edd9 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -54,11 +54,10 @@ static int __init imx51_tzic_add_irq_domain(struct device_node *np, static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index 022bc03..85bfd5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -58,11 +58,10 @@ static int __init imx53_tzic_add_irq_domain(struct device_node *np, static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } -- cgit v0.10.2 From f64964796dedca340608fb1075ab6baad5625851 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:26 -0500 Subject: drm/radeon/kms: add some loop timeouts in pageflip code Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Cc: stable@kernel.org Reviewed-by: Mario Kleiner Tested-by: Simon Farnsworth Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 1d603a3..5e00d16 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -82,6 +82,7 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= EVERGREEN_GRPH_UPDATE_LOCK; @@ -99,7 +100,11 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ad158ea..bfc08f6 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -187,13 +187,18 @@ u32 r100_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = ((u32)crtc_base) | RADEON_CRTC_OFFSET__OFFSET_LOCK; + int i; /* Lock the graphics update lock */ /* update the scanout addresses */ WREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset, tmp); /* Wait for update_pending to go high. */ - while (!(RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 481b99e..b1053d6 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -62,6 +62,7 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -74,7 +75,11 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index a983f41..23ae1c6 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -47,6 +47,7 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -66,7 +67,11 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ -- cgit v0.10.2 From bc96f9424b0e95f2451398007be46824f93866d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:26:36 +0100 Subject: drm/radeon/kms: Hide debugging message Use the proper macro to issue the debugging message in radeon_atif_call(). Otherwise we spam the log of many systems with a message which looks like an error message of unknown origin, and could thus confuse the user. Commit dc77de12dde95c8da39e4c417eb70c7d445cf84b was a first step in this direction, but was not sufficient IMHO. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index 3f6636b..c039e5a 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -35,7 +35,8 @@ static int radeon_atif_call(acpi_handle handle) /* Fail only if calling the method fails and ATIF is supported */ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - printk(KERN_DEBUG "failed to evaluate ATIF got %s\n", acpi_format_exception(status)); + DRM_DEBUG_DRIVER("failed to evaluate ATIF got %s\n", + acpi_format_exception(status)); kfree(buffer.pointer); return 1; } -- cgit v0.10.2 From 48cc9b2c7dae377e39836c0a88dd1c5ba5566d17 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:36:39 +0100 Subject: drm/radeon/kms: Skip ACPI call to ATIF when possible I am under the impression that it only makes sense to call the ATIF method if the graphics device has an ACPI handle attached. So we could skip the call altogether if there is no such handle. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index c039e5a..3516a60 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -51,13 +51,13 @@ int radeon_acpi_init(struct radeon_device *rdev) acpi_handle handle; int ret; - /* No need to proceed if we're sure that ATIF is not supported */ - if (!ASIC_IS_AVIVO(rdev) || !rdev->bios) - return 0; - /* Get the device handle */ handle = DEVICE_ACPI_HANDLE(&rdev->pdev->dev); + /* No need to proceed if we're sure that ATIF is not supported */ + if (!ASIC_IS_AVIVO(rdev) || !rdev->bios || !handle) + return 0; + /* Call the ATIF method */ ret = radeon_atif_call(handle); if (ret) -- cgit v0.10.2 From 88d686027bb43f585914c77dd363f6e817b42c2a Mon Sep 17 00:00:00 2001 From: Charles Chin Date: Thu, 1 Dec 2011 11:21:00 +0100 Subject: ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: Charles Chin Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f4f4ebe..d8d2f9d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5057,20 +5057,6 @@ static int stac92xx_pre_resume(struct hda_codec *codec) return 0; } -static int stac92xx_post_suspend(struct hda_codec *codec) -{ - struct sigmatel_spec *spec = codec->spec; - if (spec->gpio_led > 8) { - /* with vref-out pin used for mute led control - * codec AFG is prevented from D3 state, but on - * system suspend it can (and should) be used - */ - snd_hda_codec_read(codec, codec->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - } - return 0; -} - static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg, unsigned int power_state) { @@ -5670,8 +5656,6 @@ again: } else { codec->patch_ops.set_power_state = stac92xx_set_power_state; - codec->patch_ops.post_suspend = - stac92xx_post_suspend; } codec->patch_ops.pre_resume = stac92xx_pre_resume; codec->patch_ops.check_power_status = @@ -5985,8 +5969,6 @@ again: } else { codec->patch_ops.set_power_state = stac92xx_set_power_state; - codec->patch_ops.post_suspend = - stac92xx_post_suspend; } codec->patch_ops.pre_resume = stac92xx_pre_resume; codec->patch_ops.check_power_status = -- cgit v0.10.2 From 5f894cbb6890d317699aa622b4dc9d73d009cd22 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 1 Dec 2011 13:32:14 +0100 Subject: [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check In order to have the same behavior for kdump based stand-alone dump as for the kexec method, the is_kdump_kernel() check (only true for the kexec method) has to be replaced by the OLDMEM_BASE check (true for both methods). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e58a462..e54c4ff 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -579,7 +579,7 @@ static unsigned long __init find_crash_base(unsigned long crash_size, *msg = "first memory chunk must be at least crashkernel size"; return 0; } - if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE)) + if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) return OLDMEM_BASE; for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { -- cgit v0.10.2 From d9ae6772d3a3d7325d535577d9fd09c0de8a9da3 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:15 +0100 Subject: [S390] ptrace inferior call interactions with TIF_SYSCALL The TIF_SYSCALL bit needs to be cleared if the debugger changes the state of the ptraced process in regard to the presence of a system call. Otherwise the system call will be restarted although the debugger set up an inferior call. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 05a85bc..7f6f9f3 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -460,9 +460,9 @@ void do_signal(struct pt_regs *regs) regs->svc_code >> 16); break; } - /* No longer in a system call */ - clear_thread_flag(TIF_SYSCALL); } + /* No longer in a system call */ + clear_thread_flag(TIF_SYSCALL); if ((is_compat_task() ? handle_signal32(signr, &ka, &info, oldset, regs) : @@ -486,6 +486,7 @@ void do_signal(struct pt_regs *regs) } /* No handlers present - check for system call restart */ + clear_thread_flag(TIF_SYSCALL); if (current_thread_info()->system_call) { regs->svc_code = current_thread_info()->system_call; switch (regs->gprs[2]) { @@ -500,9 +501,6 @@ void do_signal(struct pt_regs *regs) regs->gprs[2] = regs->orig_gpr2; set_thread_flag(TIF_SYSCALL); break; - default: - clear_thread_flag(TIF_SYSCALL); - break; } } -- cgit v0.10.2 From 7c81878b34dd1b75dec5c8b68951d1439854d358 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Thu, 1 Dec 2011 13:32:16 +0100 Subject: [S390] fix page change underindication in pgste_update_all This patch makes sure we don't underindicate _PAGE_CHANGED in case we have a race between an operation that changes the page and this code path that hits us between page_get_storage_key and page_set_storage_key. Note that we still have a potential underindication on _PAGE_REFERENCED in the unlikely event that the page was changed but not referenced _and_ someone references the page in the race window. That's not considered to be a problem. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 524d23b..4f289ff 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -599,10 +599,10 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); /* Clear page changed & referenced bit in the storage key */ - if (bits) { - skey ^= bits; - page_set_storage_key(address, skey, 1); - } + if (bits & _PAGE_CHANGED) + page_set_storage_key(address, skey ^ bits, 1); + else if (bits) + page_reset_referenced(address); /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ /* Get host changed & referenced bits from pgste */ -- cgit v0.10.2 From b934069c991355d27a053a932591c77960f4e414 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:17 +0100 Subject: [S390] add missing .set function for NT_S390_LAST_BREAK regset The last breaking event address is a read-only value, the regset misses the .set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we get an oops due to a branch to zero: Kernel BUG at 0000000000000002 verbose debug info unavailable illegal operation: 0001 #1 SMP ... Call Trace: (<0000000000158294> ptrace_regset+0x184/0x188) <00000000001595b6> ptrace_request+0x37a/0x4fc <0000000000109a78> arch_ptrace+0x108/0x1fc <00000000001590d6> SyS_ptrace+0xaa/0x12c <00000000005c7a42> sysc_noemu+0x16/0x1c <000003fffd5ec10c> 0x3fffd5ec10c Last Breaking-Event-Address: <0000000000158242> ptrace_regset+0x132/0x188 Add a nop .set function to prevent the branch to zero. Signed-off-by: Martin Schwidefsky Cc: stable@kernel.org diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 450931a..f05649f 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -905,6 +905,14 @@ static int s390_last_break_get(struct task_struct *target, return 0; } +static int s390_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + #endif static int s390_system_call_get(struct task_struct *target, @@ -951,6 +959,7 @@ static const struct user_regset s390_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_last_break_get, + .set = s390_last_break_set, }, #endif [REGSET_SYSTEM_CALL] = { @@ -1116,6 +1125,14 @@ static int s390_compat_last_break_get(struct task_struct *target, return 0; } +static int s390_compat_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + static const struct user_regset s390_compat_regsets[] = { [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, @@ -1139,6 +1156,7 @@ static const struct user_regset s390_compat_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_compat_last_break_get, + .set = s390_compat_last_break_set, }, [REGSET_SYSTEM_CALL] = { .core_note_type = NT_S390_SYSTEM_CALL, -- cgit v0.10.2 From cfc9066bcd3ab498268e1d075f1556bb5244c0aa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:18 +0100 Subject: [S390] remove reset of system call restart on psw changes git commit 20b40a794baf3b4b "signal race with restarting system calls" added code to the poke_user/poke_user_compat to reset the system call restart information in the thread-info if the PSW address is changed. The purpose of that change has been to workaround old gdbs that do not know about the REGSET_SYSTEM_CALL. It turned out that this is not a good idea, it makes the behaviour of the debuggee dependent on the order of specific ptrace call, e.g. the REGSET_SYSTEM_CALL register set needs to be written last. And the workaround does not really fix old gdbs, inferior calls on interrupted restarting system calls do not work either way. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f05649f..573bc29 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -296,13 +296,6 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)))) /* Invalid psw mask. */ return -EINVAL; - if (addr == (addr_t) &dummy->regs.psw.addr) - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; - *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { @@ -614,11 +607,6 @@ static int __poke_user_compat(struct task_struct *child, /* Transfer 31 bit amode bit to psw mask. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) | (__u64)(tmp & PSW32_ADDR_AMODE); - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; } else { /* gpr 0-15 */ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp; -- cgit v0.10.2 From 817e5000ebc4d448ca514db49b55073a724f8552 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:19 +0100 Subject: [S390] hibernate: directly trigger subchannel evaluation Using the generic css_schedule_eval to evaluate subchannels while resuming from hibernation is very slow when used with many devices. Provide a new evaluation trigger which exploits css_sched_sch_todo and use this in the resume callback for ccw devices. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index 155a82b..4a1ff5c 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -68,8 +68,13 @@ struct schib { __u8 mda[4]; /* model dependent area */ } __attribute__ ((packed,aligned(4))); +/* + * When rescheduled, todo's with higher values will overwrite those + * with lower values. + */ enum sch_todo { SCH_TODO_NOTHING, + SCH_TODO_EVAL, SCH_TODO_UNREG, }; diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 92d7324..21908e6 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -195,51 +195,6 @@ void css_sch_device_unregister(struct subchannel *sch) } EXPORT_SYMBOL_GPL(css_sch_device_unregister); -static void css_sch_todo(struct work_struct *work) -{ - struct subchannel *sch; - enum sch_todo todo; - - sch = container_of(work, struct subchannel, todo_work); - /* Find out todo. */ - spin_lock_irq(sch->lock); - todo = sch->todo; - CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, - sch->schid.sch_no, todo); - sch->todo = SCH_TODO_NOTHING; - spin_unlock_irq(sch->lock); - /* Perform todo. */ - if (todo == SCH_TODO_UNREG) - css_sch_device_unregister(sch); - /* Release workqueue ref. */ - put_device(&sch->dev); -} - -/** - * css_sched_sch_todo - schedule a subchannel operation - * @sch: subchannel - * @todo: todo - * - * Schedule the operation identified by @todo to be performed on the slow path - * workqueue. Do nothing if another operation with higher priority is already - * scheduled. Needs to be called with subchannel lock held. - */ -void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) -{ - CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", - sch->schid.ssid, sch->schid.sch_no, todo); - if (sch->todo >= todo) - return; - /* Get workqueue ref. */ - if (!get_device(&sch->dev)) - return; - sch->todo = todo; - if (!queue_work(cio_work_q, &sch->todo_work)) { - /* Already queued, release workqueue ref. */ - put_device(&sch->dev); - } -} - static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw) { int i; @@ -466,6 +421,65 @@ static void css_evaluate_subchannel(struct subchannel_id schid, int slow) css_schedule_eval(schid); } +/** + * css_sched_sch_todo - schedule a subchannel operation + * @sch: subchannel + * @todo: todo + * + * Schedule the operation identified by @todo to be performed on the slow path + * workqueue. Do nothing if another operation with higher priority is already + * scheduled. Needs to be called with subchannel lock held. + */ +void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) +{ + CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", + sch->schid.ssid, sch->schid.sch_no, todo); + if (sch->todo >= todo) + return; + /* Get workqueue ref. */ + if (!get_device(&sch->dev)) + return; + sch->todo = todo; + if (!queue_work(cio_work_q, &sch->todo_work)) { + /* Already queued, release workqueue ref. */ + put_device(&sch->dev); + } +} + +static void css_sch_todo(struct work_struct *work) +{ + struct subchannel *sch; + enum sch_todo todo; + int ret; + + sch = container_of(work, struct subchannel, todo_work); + /* Find out todo. */ + spin_lock_irq(sch->lock); + todo = sch->todo; + CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, + sch->schid.sch_no, todo); + sch->todo = SCH_TODO_NOTHING; + spin_unlock_irq(sch->lock); + /* Perform todo. */ + switch (todo) { + case SCH_TODO_NOTHING: + break; + case SCH_TODO_EVAL: + ret = css_evaluate_known_subchannel(sch, 1); + if (ret == -EAGAIN) { + spin_lock_irq(sch->lock); + css_sched_sch_todo(sch, todo); + spin_unlock_irq(sch->lock); + } + break; + case SCH_TODO_UNREG: + css_sch_device_unregister(sch); + break; + } + /* Release workqueue ref. */ + put_device(&sch->dev); +} + static struct idset *slow_subchannel_set; static spinlock_t slow_subchannel_lock; static wait_queue_head_t css_eval_wq; diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index d734f4a..4726985 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1868,9 +1868,9 @@ static void __ccw_device_pm_restore(struct ccw_device *cdev) */ cdev->private->flags.resuming = 1; cdev->private->path_new_mask = LPM_ANYPATH; - css_schedule_eval(sch->schid); + css_sched_sch_todo(sch, SCH_TODO_EVAL); spin_unlock_irq(sch->lock); - css_complete_work(); + css_wait_for_slow_path(); /* cdev may have been moved to a different subchannel. */ sch = to_subchannel(cdev->dev.parent); -- cgit v0.10.2 From 659213b899f389d3a1e211796713ceaaa280fa44 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:20 +0100 Subject: [S390] cio: disallow driver io for known to be broken paths When a driver requests to do IO, we will adjust the mask of paths to be used to exclude varied offline paths. Drivers trying to do IO solely on paths which are online but some way defective may lack the information to do proper error handling. There is no reason to allow the usage of known to be broken paths. Thus restrict the paths a ccw driver can use for IO to a subset of the paths cio found usable (this also excludes offline paths). Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index f98698d..41c21ad 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -213,9 +213,9 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, ret = cio_set_options (sch, flags); if (ret) return ret; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } @@ -607,9 +607,9 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, return -EINVAL; if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } -- cgit v0.10.2 From 50c8e31f38f380f04885c66bde0bc4c946e786ee Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:21 +0100 Subject: [S390] cio: provide fake irb for transport mode IO If a driver wants to do command mode IO while CIO is doing online path verification we ignore this request and provide a fake irb when we are done and the driver can do IO again. For transport mode IO we have no such mechanism, giving the driver no other chance then to retry the action until we are done. This is not very reliable. Provide a fake irb for transport mode IO as well. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 52c233f..1b85351 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -496,8 +496,26 @@ static void ccw_device_reset_path_events(struct ccw_device *cdev) cdev->private->pgid_reset_mask = 0; } -void -ccw_device_verify_done(struct ccw_device *cdev, int err) +static void create_fake_irb(struct irb *irb, int type) +{ + memset(irb, 0, sizeof(*irb)); + if (type == FAKE_CMD_IRB) { + struct cmd_scsw *scsw = &irb->scsw.cmd; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } else if (type == FAKE_TM_IRB) { + struct tm_scsw *scsw = &irb->scsw.tm; + scsw->x = 1; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } +} + +void ccw_device_verify_done(struct ccw_device *cdev, int err) { struct subchannel *sch; @@ -520,12 +538,8 @@ callback: ccw_device_done(cdev, DEV_STATE_ONLINE); /* Deliver fake irb to device driver, if needed. */ if (cdev->private->flags.fake_irb) { - memset(&cdev->private->irb, 0, sizeof(struct irb)); - cdev->private->irb.scsw.cmd.cc = 1; - cdev->private->irb.scsw.cmd.fctl = SCSW_FCTL_START_FUNC; - cdev->private->irb.scsw.cmd.actl = SCSW_ACTL_START_PEND; - cdev->private->irb.scsw.cmd.stctl = - SCSW_STCTL_STATUS_PEND; + create_fake_irb(&cdev->private->irb, + cdev->private->flags.fake_irb); cdev->private->flags.fake_irb = 0; if (cdev->handler) cdev->handler(cdev, cdev->private->intparm, diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 41c21ad..ec7fb6d 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -198,7 +198,7 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, if (cdev->private->state == DEV_STATE_VERIFY) { /* Remember to fake irb when finished. */ if (!cdev->private->flags.fake_irb) { - cdev->private->flags.fake_irb = 1; + cdev->private->flags.fake_irb = FAKE_CMD_IRB; cdev->private->intparm = intparm; return 0; } else @@ -605,6 +605,16 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, sch = to_subchannel(cdev->dev.parent); if (!sch->schib.pmcw.ena) return -EINVAL; + if (cdev->private->state == DEV_STATE_VERIFY) { + /* Remember to fake irb when finished. */ + if (!cdev->private->flags.fake_irb) { + cdev->private->flags.fake_irb = FAKE_TM_IRB; + cdev->private->intparm = intparm; + return 0; + } else + /* There's already a fake I/O around. */ + return -EBUSY; + } if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; /* Adjust requested path mask to exclude unusable paths. */ diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index 2ebb492..76253df 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -111,6 +111,9 @@ enum cdev_todo { CDEV_TODO_UNREG_EVAL, }; +#define FAKE_CMD_IRB 1 +#define FAKE_TM_IRB 2 + struct ccw_device_private { struct ccw_device *cdev; struct subchannel *sch; @@ -138,7 +141,7 @@ struct ccw_device_private { unsigned int doverify:1; /* delayed path verification */ unsigned int donotify:1; /* call notify function */ unsigned int recog_done:1; /* dev. recog. complete */ - unsigned int fake_irb:1; /* deliver faked irb */ + unsigned int fake_irb:2; /* deliver faked irb */ unsigned int resuming:1; /* recognition while resume */ unsigned int pgroup:1; /* pathgroup is set up */ unsigned int mpath:1; /* multipathing is set up */ -- cgit v0.10.2 From 3b484ec648490518dd16ed7d8f02206a39539a59 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:22 +0100 Subject: [S390] cio: fix chsc_chp_vary The functions called by chsc_chp_vary operate on pointers to channel path ids not channel path links. (This worked by chance since the id is the first member of the link structure) Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 75c3f1f..a84631a 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -529,10 +529,7 @@ __s390_vary_chpid_on(struct subchannel_id schid, void *data) int chsc_chp_vary(struct chp_id chpid, int on) { struct channel_path *chp = chpid_to_chp(chpid); - struct chp_link link; - memset(&link, 0, sizeof(struct chp_link)); - link.chpid = chpid; /* Wait until previous actions have settled. */ css_wait_for_slow_path(); /* @@ -542,10 +539,10 @@ int chsc_chp_vary(struct chp_id chpid, int on) /* Try to update the channel path descritor. */ chsc_determine_base_channel_path_desc(chpid, &chp->desc); for_each_subchannel_staged(s390_subchannel_vary_chpid_on, - __s390_vary_chpid_on, &link); + __s390_vary_chpid_on, &chpid); } else for_each_subchannel_staged(s390_subchannel_vary_chpid_off, - NULL, &link); + NULL, &chpid); return 0; } -- cgit v0.10.2 From 75464960fc0ccc505527edc1459c8ad191fbc0cc Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Thu, 1 Dec 2011 13:32:23 +0100 Subject: [S390] ap: Setup timer for sending messages after reset. Setup timer for processing messages in request queue after a successful AP bus device reset. Signed-off-by: Holger Dengler Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index ec94f04..96bbe9d 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1552,6 +1552,8 @@ static void ap_reset(struct ap_device *ap_dev) rc = ap_init_queue(ap_dev->qid); if (rc == -ENODEV) ap_dev->unregistered = 1; + else + __ap_schedule_poll_timer(); } static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags) -- cgit v0.10.2 From f4a8e6563ea5366f563cb741a27fe90c5fa7f0fc Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Thu, 1 Dec 2011 09:30:36 -0500 Subject: Btrfs: fix meta data raid-repair merge problem Commit 4a54c8c16 introduced raid-repair, killing the individual readpage_io_failed_hook entries from inode.c and disk-io.c. Commit 4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to disk-io.c. The raid-repair commit had logic to disable raid-repair, if readpage_io_failed_hook is set. Thus, the readahead commit effectively disabled raid-repair for meta data. This commit changes the logic to always attempt raid-repair when needed and call the readpage_io_failed_hook in case raid-repair fails. This is much more straight forward and should have been like that from the beginning. Signed-off-by: Jan Schmidt Reported-by: Stefan Behrens Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 9472d3d..be1bf62 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2287,14 +2287,20 @@ static void end_bio_extent_readpage(struct bio *bio, int err) if (!uptodate) { int failed_mirror; failed_mirror = (int)(unsigned long)bio->bi_bdev; - if (tree->ops && tree->ops->readpage_io_failed_hook) - ret = tree->ops->readpage_io_failed_hook( - bio, page, start, end, - failed_mirror, state); - else - ret = bio_readpage_error(bio, page, start, end, - failed_mirror, NULL); + /* + * The generic bio_readpage_error handles errors the + * following way: If possible, new read requests are + * created and submitted and will end up in + * end_bio_extent_readpage as well (if we're lucky, not + * in the !uptodate case). In that case it returns 0 and + * we just go on with the next page in our bio. If it + * can't handle the error it will return -EIO and we + * remain responsible for that page. + */ + ret = bio_readpage_error(bio, page, start, end, + failed_mirror, NULL); if (ret == 0) { +error_handled: uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); if (err) @@ -2302,6 +2308,13 @@ static void end_bio_extent_readpage(struct bio *bio, int err) uncache_state(&cached); continue; } + if (tree->ops && tree->ops->readpage_io_failed_hook) { + ret = tree->ops->readpage_io_failed_hook( + bio, page, start, end, + failed_mirror, state); + if (ret == 0) + goto error_handled; + } } if (uptodate) { -- cgit v0.10.2 From 03360c5a405999d605ffc7373a7b90f3388db92e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 1 Dec 2011 10:44:17 -0500 Subject: Revert "mac80211: clear sta.drv_priv on reconfiguration" This reverts commit f785d83a19bca326f79d127a413e35769afc0105. This was provoking WARNINGs from the iwlegacy drivers. Signed-off-by: John W. Linville diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 0c94907..6719bce 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1038,7 +1038,6 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_sub_if_data, u.ap); - memset(&sta->sta.drv_priv, 0, hw->sta_data_size); WARN_ON(drv_sta_add(local, sdata, &sta->sta)); } } -- cgit v0.10.2 From 2ed4d9d648cbd4fb1c232a646dbdbdfdd373ca94 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Dec 2011 11:02:11 -0500 Subject: drm/radeon/kms: add some new pci ids Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index f81676f..4e4fbb8 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -197,6 +197,14 @@ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ -- cgit v0.10.2 From 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 30 Nov 2011 16:37:41 +0800 Subject: xHCI: fix bug in xhci_clear_command_ring() When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Reported-by: Oliver Neukum diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa94c01..a1afb7c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -711,7 +711,10 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) ring = xhci->cmd_ring; seg = ring->deq_seg; do { - memset(seg->trbs, 0, SEGMENT_SIZE); + memset(seg->trbs, 0, + sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); + seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= + cpu_to_le32(~TRB_CYCLE); seg = seg->next; } while (seg != ring->deq_seg); -- cgit v0.10.2 From efbc368dcc6426d5430b9b8eeda944cf2cb74b8c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 13:38:59 -0500 Subject: ipv4: Perform peer validation on cached route lookup. Otherwise we won't notice the peer GENID change. Reported-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 57e01bc..ca5e237 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1693,12 +1693,8 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } -static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +static struct rtable *ipv4_validate_peer(struct rtable *rt) { - struct rtable *rt = (struct rtable *) dst; - - if (rt_is_expired(rt)) - return NULL; if (rt->rt_peer_genid != rt_peer_genid()) { struct inet_peer *peer; @@ -1707,19 +1703,29 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) peer = rt->peer; if (peer) { - check_peer_pmtu(dst, peer); + check_peer_pmtu(&rt->dst, peer); if (peer->redirect_genid != redirect_genid) peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { - if (check_peer_redir(dst, peer)) + if (check_peer_redir(&rt->dst, peer)) return NULL; } } rt->rt_peer_genid = rt_peer_genid(); } + return rt; +} + +static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +{ + struct rtable *rt = (struct rtable *) dst; + + if (rt_is_expired(rt)) + return NULL; + dst = (struct dst_entry *) ipv4_validate_peer(rt); return dst; } @@ -2374,6 +2380,9 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; if (noref) { dst_use_noref(&rth->dst, jiffies); skb_dst_set_noref(skb, &rth->dst); @@ -2749,6 +2758,9 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4) (IPTOS_RT_MASK | RTO_ONLINK)) && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; dst_use(&rth->dst, jiffies); RT_CACHE_STAT_INC(out_hit); rcu_read_unlock_bh(); -- cgit v0.10.2 From 0de13500ad1d8a66b7dc1e7fa517ea15a2625c9e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 1 Dec 2011 10:30:16 -0800 Subject: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp Tested-by: Julian Sikorski Cc: Andiry Xu diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index d2a7332..ef98b38 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,8 +33,6 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 -#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 - static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -76,11 +74,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) { + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; - if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) - xhci->quirks |= XHCI_RESET_ON_RESUME; - } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; -- cgit v0.10.2 From 307369b0ca06b27b511b61714e335ddfccf19c4f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Wed, 30 Nov 2011 17:01:04 +0100 Subject: usb: ftdi_sio: add PID for Propox ISPcable III MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin Kościelnicki Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bd4298b..ff3db5d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -736,6 +736,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 571fa96..055b64e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -112,6 +112,7 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 /* Lenz LI-USB Computer Interface. */ #define FTDI_LENZ_LIUSB_PID 0xD780 -- cgit v0.10.2 From b03b6dd58cef7d15b7c46a6729b83dd535ef08ab Mon Sep 17 00:00:00 2001 From: Vitalii Demianets Date: Fri, 25 Nov 2011 00:16:37 +0000 Subject: bridge: master device stuck in no-carrier state forever when in user-stp mode When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index e5f9ece3..a1daf82 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -18,6 +18,7 @@ #include #include "br_private.h" +#include "br_private_stp.h" static inline size_t br_nlmsg_size(void) { @@ -188,6 +189,11 @@ static int br_rtm_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) p->state = new_state; br_log_state(p); + + spin_lock_bh(&p->br->lock); + br_port_state_selection(p->br); + spin_unlock_bh(&p->br->lock); + br_ifinfo_notify(RTM_NEWLINK, p); return 0; diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index ad0a3f7..dd147d7 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -399,25 +399,24 @@ void br_port_state_selection(struct net_bridge *br) struct net_bridge_port *p; unsigned int liveports = 0; - /* Don't change port states if userspace is handling STP */ - if (br->stp_enabled == BR_USER_STP) - return; - list_for_each_entry(p, &br->port_list, list) { if (p->state == BR_STATE_DISABLED) continue; - if (p->port_no == br->root_port) { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_forwarding(p); - } else if (br_is_designated_port(p)) { - del_timer(&p->message_age_timer); - br_make_forwarding(p); - } else { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_blocking(p); + /* Don't change port states if userspace is handling STP */ + if (br->stp_enabled != BR_USER_STP) { + if (p->port_no == br->root_port) { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_forwarding(p); + } else if (br_is_designated_port(p)) { + del_timer(&p->message_age_timer); + br_make_forwarding(p); + } else { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_blocking(p); + } } if (p->state == BR_STATE_FORWARDING) -- cgit v0.10.2 From 59c2cdae2791c0b2ee13d148edc6b771e7e7953f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 14:12:55 -0500 Subject: Revert "udp: remove redundant variable" This reverts commit 81d54ec8479a2c695760da81f05b5a9fb2dbe40a. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: paul bilke Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ab0966d..5a65eea 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1164,7 +1164,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, struct inet_sock *inet = inet_sk(sk); struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name; struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -1186,9 +1186,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; /* @@ -1197,14 +1198,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov, len); + msg->msg_iov, copied); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), @@ -1233,7 +1234,7 @@ try_again: if (inet->cmsg_flags) ip_cmsg_recv(msg, skb); - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 846f4757..8c25419 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -340,7 +340,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, struct ipv6_pinfo *np = inet6_sk(sk); struct inet_sock *inet = inet_sk(sk); struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -363,9 +363,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; is_udp4 = (skb->protocol == htons(ETH_P_IP)); @@ -376,14 +377,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov,len); + msg->msg_iov, copied ); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); if (err == -EINVAL) @@ -432,7 +433,7 @@ try_again: datagram_recv_ctl(sk, msg, skb); } - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; -- cgit v0.10.2 From 939255798a468e1a92f03546de6e87be7b491e57 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 15 Nov 2011 14:56:34 -0800 Subject: ocfs2: avoid unaligned access to dqc_bitmap The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: Akinobu Mita Acked-by: Joel Becker Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index bcde467..d355e6e 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -849,5 +849,52 @@ static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap) #define ocfs2_test_bit test_bit_le #define ocfs2_find_next_zero_bit find_next_zero_bit_le #define ocfs2_find_next_bit find_next_bit_le + +static inline void *correct_addr_and_bit_unaligned(int *bit, void *addr) +{ +#if BITS_PER_LONG == 64 + *bit += ((unsigned long) addr & 7UL) << 3; + addr = (void *) ((unsigned long) addr & ~7UL); +#elif BITS_PER_LONG == 32 + *bit += ((unsigned long) addr & 3UL) << 3; + addr = (void *) ((unsigned long) addr & ~3UL); +#else +#error "how many bits you are?!" +#endif + return addr; +} + +static inline void ocfs2_set_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + ocfs2_set_bit(bit, bitmap); +} + +static inline void ocfs2_clear_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + ocfs2_clear_bit(bit, bitmap); +} + +static inline int ocfs2_test_bit_unaligned(int bit, void *bitmap) +{ + bitmap = correct_addr_and_bit_unaligned(&bit, bitmap); + return ocfs2_test_bit(bit, bitmap); +} + +static inline int ocfs2_find_next_zero_bit_unaligned(void *bitmap, int max, + int start) +{ + int fix = 0, ret, tmpmax; + bitmap = correct_addr_and_bit_unaligned(&fix, bitmap); + tmpmax = max + fix; + start += fix; + + ret = ocfs2_find_next_zero_bit(bitmap, tmpmax, start) - fix; + if (ret > max) + return max; + return ret; +} + #endif /* OCFS2_H */ diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c index 942fd65..f100bf7 100644 --- a/fs/ocfs2/quota_local.c +++ b/fs/ocfs2/quota_local.c @@ -551,8 +551,8 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode, goto out_commit; } lock_buffer(qbh); - WARN_ON(!ocfs2_test_bit(bit, dchunk->dqc_bitmap)); - ocfs2_clear_bit(bit, dchunk->dqc_bitmap); + WARN_ON(!ocfs2_test_bit_unaligned(bit, dchunk->dqc_bitmap)); + ocfs2_clear_bit_unaligned(bit, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, 1); unlock_buffer(qbh); ocfs2_journal_dirty(handle, qbh); @@ -949,7 +949,7 @@ static struct ocfs2_quota_chunk *ocfs2_find_free_entry(struct super_block *sb, * ol_quota_entries_per_block(sb); } - found = ocfs2_find_next_zero_bit(dchunk->dqc_bitmap, len, 0); + found = ocfs2_find_next_zero_bit_unaligned(dchunk->dqc_bitmap, len, 0); /* We failed? */ if (found == len) { mlog(ML_ERROR, "Did not find empty entry in chunk %d with %u" @@ -1213,7 +1213,7 @@ static void olq_alloc_dquot(struct buffer_head *bh, void *private) struct ocfs2_local_disk_chunk *dchunk; dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data; - ocfs2_set_bit(*offset, dchunk->dqc_bitmap); + ocfs2_set_bit_unaligned(*offset, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, -1); } @@ -1294,7 +1294,7 @@ int ocfs2_local_release_dquot(handle_t *handle, struct dquot *dquot) (od->dq_chunk->qc_headerbh->b_data); /* Mark structure as freed */ lock_buffer(od->dq_chunk->qc_headerbh); - ocfs2_clear_bit(offset, dchunk->dqc_bitmap); + ocfs2_clear_bit_unaligned(offset, dchunk->dqc_bitmap); le32_add_cpu(&dchunk->dqc_free, 1); unlock_buffer(od->dq_chunk->qc_headerbh); ocfs2_journal_dirty(handle, od->dq_chunk->qc_headerbh); -- cgit v0.10.2 From 5611cc4572e889b62a7b4c72a413536bf6a9c416 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 1 Dec 2011 14:56:01 -0800 Subject: Linux 3.2-rc4 diff --git a/Makefile b/Makefile index 3a8f064..12aafc2 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From b1f919664d04a8d0ba29cb76673c7ca3325a2006 Mon Sep 17 00:00:00 2001 From: "Yang Honggang (Joseph)" Date: Thu, 1 Dec 2011 22:22:41 -0500 Subject: clocksource: Fix bug with max_deferment margin calculation In order to leave a margin of 12.5% we should >> 3 not >> 5. CC: stable@kernel.org Signed-off-by: Yang Honggang (Joseph) [jstultz: Modified commit subject] Signed-off-by: John Stultz diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index cfc65e1..da2f760 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -548,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs) * note a margin of 12.5% is used because this can be computed with * a shift, versus say 10% which would require division. */ - return max_nsecs - (max_nsecs >> 5); + return max_nsecs - (max_nsecs >> 3); } #ifndef CONFIG_ARCH_USES_GETTIMEOFFSET @@ -669,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) * ~ 0.06ppm granularity for NTP. We apply the same 12.5% * margin as we do in clocksource_max_deferment() */ - sec = (cs->mask - (cs->mask >> 5)); + sec = (cs->mask - (cs->mask >> 3)); do_div(sec, freq); do_div(sec, scale); if (!sec) -- cgit v0.10.2 From 1ee5fa1e9970a16036e37c7b9d5ce81c778252fc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 1 Dec 2011 11:06:34 +0000 Subject: sch_red: fix red_change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 6649463..d617161 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -209,8 +209,8 @@ static int red_change(struct Qdisc *sch, struct nlattr *opt) ctl->Plog, ctl->Scell_log, nla_data(tb[TCA_RED_STAB])); - if (skb_queue_empty(&sch->q)) - red_end_of_idle_period(&q->parms); + if (!q->qdisc->q.qlen) + red_start_of_idle_period(&q->parms); sch_tree_unlock(sch); return 0; -- cgit v0.10.2 From a50527b19c62c808a7fca022816fff88a50b948d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Dec 2011 09:17:02 +0800 Subject: fs: Make write(2) interruptible by a fatal signal Currently write(2) to a file is not interruptible by any signal. Sometimes this is desirable, e.g. when you want to quickly kill a process hogging your disk. Also, with commit 499d05ecf990 ("mm: Make task in balance_dirty_pages() killable"), it's necessary to abort the current write accordingly to avoid it quickly dirtying lots more pages at unthrottled rate. This patch makes write interruptible by SIGKILL. We do not allow write to be interruptible by any other signal because that has larger potential of screwing some badly written applications. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Acked-by: Matthew Wilcox Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang diff --git a/mm/filemap.c b/mm/filemap.c index c0018f2..c106d3b 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2407,7 +2407,6 @@ static ssize_t generic_perform_write(struct file *file, iov_iter_count(i)); again: - /* * Bring in the user page that we will copy from _first_. * Otherwise there's a nasty deadlock on copying from the @@ -2463,7 +2462,10 @@ again: written += copied; balance_dirty_pages_ratelimited(mapping); - + if (fatal_signal_pending(current)) { + status = -EINTR; + break; + } } while (iov_iter_count(i)); return written ? written : status; -- cgit v0.10.2 From 650f7a72b8cc235ffe4a0e3eff37954349026721 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Dec 2011 17:47:06 -0800 Subject: ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below 60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik for figuring this one out. Reported-by: Janusz Krzysztofik Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb5..3f30561 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -930,6 +930,9 @@ void __init omap1_clk_late_init(void) if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); -- cgit v0.10.2 From b29e23547ecb2a609777288cd81fc83b01f9f43f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:30:39 +0100 Subject: ARM: OMAP1: Remove unsafe clock values from omap1_defconfig DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(), resulting in the defalut rate of 60 MHz always used instead of the one selected in .config. OTOH, in omap1_defconfig we currently rely on Kconfig options for the supported MHz rates in case of boards which boot with dpll1 not set correctly by their boot loaders. This means that before we allow for reprogramming of dpll1 rate, we should remove all unsafe clock selections from omap1_defconfig, otherwise it will stop booting on boards with imperfect boot loaders, as it would always try to change to 216MHz. Keep only one safe clock rate per each supported xtal frequency, i.e. 60MHZ dpll1 for 12MHz xtal and 182MHz dpll1 for 13MHz xtal. BTW, this change goes into the direction of removing all OMAP1 clock rate options, planned for next merge window. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e7775..945a34f 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y -- cgit v0.10.2 From c2cb211116192690605eaa70d39deb04241003e2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:01 +0100 Subject: ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3f30561..86b2dec 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -937,7 +937,7 @@ void __init omap1_clk_late_init(void) if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); -- cgit v0.10.2 From d01ff0a049f749e0bf10a35bb23edd012718c8c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?= Date: Thu, 1 Dec 2011 15:47:06 +0000 Subject: ipv4: flush route cache after change accept_local After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan Signed-off-by: David S. Miller diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c6b5092..65f01dc 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1490,7 +1490,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { + int old_value = *(int *)ctl->data; int ret = proc_dointvec(ctl, write, buffer, lenp, ppos); + int new_value = *(int *)ctl->data; if (write) { struct ipv4_devconf *cnf = ctl->extra1; @@ -1501,6 +1503,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, if (cnf == net->ipv4.devconf_dflt) devinet_copy_dflt_conf(net, i); + if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1) + if ((new_value == 0) && (old_value != 0)) + rt_cache_flush(net, 0); } return ret; -- cgit v0.10.2 From 1bdfd27a0bd65ccdd7294c1080bdb59f6a5a6e72 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:18:14 +0800 Subject: ARM: CSR: fix build error due to new mdesc->dma_zone_size commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c0..a12b689 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From b2dcb8723eb61d00c40d526702d08f6d805f5f01 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:27:22 +0800 Subject: ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160..26ebb57 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 3ced1be5490f5c415d51a1e5918beeb9239d546b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 22:19:01 -0500 Subject: netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index e8f3796..d5597b7 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -201,7 +201,6 @@ config NF_CONNTRACK_BROADCAST config NF_CONNTRACK_NETBIOS_NS tristate "NetBIOS name service protocol support" - depends on NETFILTER_ADVANCED select NF_CONNTRACK_BROADCAST help NetBIOS name service requests are sent as broadcast messages from an -- cgit v0.10.2 From 769bbb634f30c1b76277623676011a77f31bcc20 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 2 Dec 2011 13:51:56 +0900 Subject: MAINTAINERS: Consolidate Samsung MAINTAINERS These days most Samsung stuff gets in the kernel through Kukjin Kim. This patch changes MAINTAINERS to reflect this. By adding Kukjin Kim to the maintainers for S3C2410, S3C244x and S3C64xx alongside Ben Dooks the extra entries become identical to the base ARM/SAMSUNG entry and can move into it. Also the S3C2416 gets a maintainer through the s3c24* wildcard - as it did not have one until now. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim diff --git a/MAINTAINERS b/MAINTAINERS index 4475602..1445a830 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1059,31 +1059,11 @@ S: Maintained F: arch/arm/plat-samsung/ F: arch/arm/plat-s3c24xx/ F: arch/arm/plat-s5p/ +F: arch/arm/mach-s3c24*/ +F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* -ARM/S3C2410 ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2410/ - -ARM/S3C244x ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2440/ -F: arch/arm/mach-s3c2443/ - -ARM/S3C64xx ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c64xx/ - ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 7a549d78e7d897651a4bc36ade7563c34cab9f8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:52:12 +0900 Subject: MAINTAINERS: Add linux-samsung-soc mailing list for Samsung There's a Samsung-specific mailing list but it's not advertised in MAINTAINERS - add it to the overall architecture to make it more discoverable. Signed-off-by: Mark Brown [kgene.kim@samsung.com: added notice of 'moderated'] Signed-off-by: Kukjin Kim diff --git a/MAINTAINERS b/MAINTAINERS index 1445a830..5230390 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1054,6 +1054,7 @@ ARM/SAMSUNG ARM ARCHITECTURES M: Ben Dooks M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/plat-samsung/ -- cgit v0.10.2 From 40c76662a1ae7f88afa22ae3b1265497e4271f72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:54:25 +0900 Subject: MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers Help people find the overall architecture. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim diff --git a/MAINTAINERS b/MAINTAINERS index 5230390..b4f1802 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1064,6 +1064,8 @@ F: arch/arm/mach-s3c24*/ F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* +F: drivers/spi/spi-s3c* +F: sound/soc/samsung/* ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim -- cgit v0.10.2 From ade145cc4885fbdf47b3abd9cd6baf23b8367fef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:36 +0900 Subject: ARM: S3C64XX: Remove extern from definition of framebuffer setup call The extern is only useful on prototypes. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb..2cf8002 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include #include -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); -- cgit v0.10.2 From f4a65ad6eb9b56180724de52ddd6dd6712121be1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:54 +0900 Subject: ARM: S3C64XX: Add linux/export.h to dev-spi.c This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b420..3341fd1 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From 71b33a4f7c864bf5fc893b5ca144770ad05f1d4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:18:02 +0900 Subject: ARM: S3C64XX: Staticise s3c6400_sysclass The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32..51c00f2 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; -- cgit v0.10.2 From 5d348401ed03450395ce674594c1c08c7d85bd8d Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:05 +0800 Subject: ARM: mxs/tx28: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47..9a7b08b 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v0.10.2 From 8d2d2d1d7e96f12d9fe140169fb39ef9fd27b7c1 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Mon, 21 Nov 2011 10:55:55 +0200 Subject: ARM: mxs: fix machines' initializers order Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo Signed-off-by: Lauri Hintsala Acked-by: Russell King Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e..6b00577 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e531..6834dea 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END -- cgit v0.10.2 From 11357be9246c7d1acf9b37ad54a18b29bbb734be Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 26 Nov 2011 11:39:14 +0100 Subject: arm: mx23: recognise stmp378x as mx23 Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang Signed-off-by: Shawn Guo Cc: stable@kernel.org diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b4..bde5f66 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ -- cgit v0.10.2 From 7d8b894ca135a896f32934f7d096714d5bc687e6 Mon Sep 17 00:00:00 2001 From: Peter Rusko Date: Wed, 30 Nov 2011 16:43:27 +0100 Subject: ARM: mx28: LRADC macro rename It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko Acked-by: Wolfram Sang Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d8611..30c7990 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 -- cgit v0.10.2 From 5eb46851de3904cd1be9192fdacb8d34deadc1fc Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Fri, 2 Dec 2011 10:07:07 +0100 Subject: cfq-iosched: fix cfq_cic_link() race confition cfq_cic_link() has race condition. When some processes which shared ioc issue I/O to same block device simultaneously, cfq_cic_link() returns -EEXIST sometimes. The race condition might stop I/O by following steps: step 1: Process A: Issue an I/O to /dev/sda step 2: Process A: Get an ioc (iocA here) in get_io_context() which does not linked with a cic for the device step 3: Process A: Get a new cic for the device (cicA here) in cfq_alloc_io_context() step 4: Process B: Issue an I/O to /dev/sda step 5: Process B: Get iocA in get_io_context() since process A and B share the same ioc step 6: Process B: Get a new cic for the device (cicB here) in cfq_alloc_io_context() since iocA has not been linked with a cic for the device yet step 7: Process A: Link cicA to iocA in cfq_cic_link() step 8: Process A: Dispatch I/O to driver and finish it step 9: Process B: Try to link cicB to iocA in cfq_cic_link() But it fails with showing "cfq: cic link failed!" kernel message, since iocA has already linked with cicA at step 7. step 10: Process B: Wait for finishig I/O in get_request_wait() The function does not wake up, when there is no I/O to the device. When cfq_cic_link() returns -EEXIST, it means ioc has already linked with cic. So when cfq_cic_link() return -EEXIST, retry cfq_cic_lookup(). Signed-off-by: Yasuaki Ishimatsu Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 3beed83..4c12869 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3184,7 +3184,7 @@ static int cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc, } } - if (ret) + if (ret && ret != -EEXIST) printk(KERN_ERR "cfq: cic link failed!\n"); return ret; @@ -3200,6 +3200,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) { struct io_context *ioc = NULL; struct cfq_io_context *cic; + int ret; might_sleep_if(gfp_mask & __GFP_WAIT); @@ -3207,6 +3208,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) if (!ioc) return NULL; +retry: cic = cfq_cic_lookup(cfqd, ioc); if (cic) goto out; @@ -3215,7 +3217,12 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) if (cic == NULL) goto err; - if (cfq_cic_link(cfqd, ioc, cic, gfp_mask)) + ret = cfq_cic_link(cfqd, ioc, cic, gfp_mask); + if (ret == -EEXIST) { + /* someone has linked cic to ioc already */ + cfq_cic_free(cic); + goto retry; + } else if (ret) goto err_free; out: -- cgit v0.10.2 From fc084e0b930d546872ab23667052499f7daf0fed Mon Sep 17 00:00:00 2001 From: David Dillow Date: Thu, 1 Dec 2011 23:26:53 -0500 Subject: ALSA: sis7019 - give slow codecs more time to reset There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: KotCzarny Signed-off-by: David Dillow Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index a391e62..28dfafb 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -41,6 +41,7 @@ MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ static int enable = 1; +static int codecs = 1; module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); @@ -48,6 +49,8 @@ module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); module_param(enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); +module_param(codecs, int, 0444); +MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)"); static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, @@ -140,6 +143,9 @@ struct sis7019 { dma_addr_t silence_dma_addr; }; +/* These values are also used by the module param 'codecs' to indicate + * which codecs should be present. + */ #define SIS_PRIMARY_CODEC_PRESENT 0x0001 #define SIS_SECONDARY_CODEC_PRESENT 0x0002 #define SIS_TERTIARY_CODEC_PRESENT 0x0004 @@ -1078,6 +1084,7 @@ static int sis_chip_init(struct sis7019 *sis) { unsigned long io = sis->ioport; void __iomem *ioaddr = sis->ioaddr; + unsigned long timeout; u16 status; int count; int i; @@ -1104,21 +1111,45 @@ static int sis_chip_init(struct sis7019 *sis) while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) udelay(1); + /* Command complete, we can let go of the semaphore now. + */ + outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); + if (!count) + return -EIO; + /* Now that we've finished the reset, find out what's attached. + * There are some codec/board combinations that take an extremely + * long time to come up. 350+ ms has been observed in the field, + * so we'll give them up to 500ms. */ - status = inl(io + SIS_AC97_STATUS); - if (status & SIS_AC97_STATUS_CODEC_READY) - sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC2_READY) - sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC3_READY) - sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; - - /* All done, let go of the semaphore, and check for errors + sis->codecs_present = 0; + timeout = msecs_to_jiffies(500) + jiffies; + while (time_before_eq(jiffies, timeout)) { + status = inl(io + SIS_AC97_STATUS); + if (status & SIS_AC97_STATUS_CODEC_READY) + sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC2_READY) + sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC3_READY) + sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; + + if (sis->codecs_present == codecs) + break; + + msleep(1); + } + + /* All done, check for errors. */ - outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); - if (!sis->codecs_present || !count) + if (!sis->codecs_present) { + printk(KERN_ERR "sis7019: could not find any codecs\n"); return -EIO; + } + + if (sis->codecs_present != codecs) { + printk(KERN_WARNING "sis7019: missing codecs, found %0x, expected %0x\n", + sis->codecs_present, codecs); + } /* Let the hardware know that the audio driver is alive, * and enable PCM slots on the AC-link for L/R playback (3 & 4) and @@ -1390,6 +1421,17 @@ static int __devinit snd_sis7019_probe(struct pci_dev *pci, if (!enable) goto error_out; + /* The user can specify which codecs should be present so that we + * can wait for them to show up if they are slow to recover from + * the AC97 cold reset. We default to a single codec, the primary. + * + * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2. + */ + codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT | + SIS_TERTIARY_CODEC_PRESENT; + if (!codecs) + codecs = SIS_PRIMARY_CODEC_PRESENT; + rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); if (rc < 0) goto error_out; -- cgit v0.10.2 From 6eebd6bb5f1ea04f04019e5c39f87a0f17ffb472 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 28 Nov 2011 21:10:05 +0000 Subject: drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL) Disabling the CRTC by setting its framebuffer to NULL, as used by drm_framebuffer_cleanup(), was failing to pass the current framebuffer to the crtc_func->disable callback. This is because of the dance within drm_crtc_helper_set_config to pass the new_fb (NULL in this case) to the drm_crtc_helper_set_mode with the currently attached fb as a parameter. drm_crtc_helper_set_mode treats this as a no-op and the encoder is still enabled. And so the current fb is forgotten before the call to drm_helper_disable_unused_functions. This patch treats disabling the CRTC as a simple special case rather than adding further complexity into the configuration logic. This fixes a pin-leak of the fb bo on Xserver close. Signed-off-by: Chris Wilson Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 3969f75..d2619d7 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -456,6 +456,30 @@ done: EXPORT_SYMBOL(drm_crtc_helper_set_mode); +static int +drm_crtc_helper_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector *connector; + struct drm_encoder *encoder; + + /* Decouple all encoders and their attached connectors from this crtc */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc != crtc) + continue; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder != encoder) + continue; + + connector->encoder = NULL; + } + } + + drm_helper_disable_unused_functions(dev); + return 0; +} + /** * drm_crtc_helper_set_config - set a new config from userspace * @crtc: CRTC to setup @@ -510,8 +534,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) (int)set->num_connectors, set->x, set->y); } else { DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); - set->mode = NULL; - set->num_connectors = 0; + return drm_crtc_helper_disable(set->crtc); } dev = set->crtc->dev; -- cgit v0.10.2 From 392e37229f0d6358dcc7b43641df776e9f62a6e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:27 -0500 Subject: drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 87631fe..2b97262 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1107,9 +1107,40 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, return -EINVAL; } - if (tiling_flags & RADEON_TILING_MACRO) + if (tiling_flags & RADEON_TILING_MACRO) { + if (rdev->family >= CHIP_CAYMAN) + tmp = rdev->config.cayman.tile_config; + else + tmp = rdev->config.evergreen.tile_config; + + switch ((tmp & 0xf0) >> 4) { + case 0: /* 4 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK); + break; + case 1: /* 8 banks */ + default: + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK); + break; + case 2: /* 16 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK); + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: /* 1KB rows */ + default: + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB); + break; + case 1: /* 2KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB); + break; + case 2: /* 4KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB); + break; + } + fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) + } else if (tiling_flags & RADEON_TILING_MICRO) fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1); switch (radeon_crtc->crtc_id) { diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h index c781c92..7d7f215 100644 --- a/drivers/gpu/drm/radeon/evergreen_reg.h +++ b/drivers/gpu/drm/radeon/evergreen_reg.h @@ -42,6 +42,17 @@ # define EVERGREEN_GRPH_DEPTH_8BPP 0 # define EVERGREEN_GRPH_DEPTH_16BPP 1 # define EVERGREEN_GRPH_DEPTH_32BPP 2 +# define EVERGREEN_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2) +# define EVERGREEN_ADDR_SURF_2_BANK 0 +# define EVERGREEN_ADDR_SURF_4_BANK 1 +# define EVERGREEN_ADDR_SURF_8_BANK 2 +# define EVERGREEN_ADDR_SURF_16_BANK 3 +# define EVERGREEN_GRPH_Z(x) (((x) & 0x3) << 4) +# define EVERGREEN_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6) +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_1 0 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_2 1 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_4 2 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_8 3 # define EVERGREEN_GRPH_FORMAT(x) (((x) & 0x7) << 8) /* 8 BPP */ # define EVERGREEN_GRPH_FORMAT_INDEXED 0 @@ -61,6 +72,24 @@ # define EVERGREEN_GRPH_FORMAT_8B_BGRA1010102 5 # define EVERGREEN_GRPH_FORMAT_RGB111110 6 # define EVERGREEN_GRPH_FORMAT_BGR101111 7 +# define EVERGREEN_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11) +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_1 0 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_2 1 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_4 2 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_8 3 +# define EVERGREEN_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13) +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_64B 0 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_128B 1 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_256B 2 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_512B 3 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB 4 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB 5 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB 6 +# define EVERGREEN_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18) +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_1 0 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_2 1 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_4 2 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_8 3 # define EVERGREEN_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) # define EVERGREEN_GRPH_ARRAY_LINEAR_GENERAL 0 # define EVERGREEN_GRPH_ARRAY_LINEAR_ALIGNED 1 -- cgit v0.10.2 From f3a71df05082c84d1408129084736c5f742a6165 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:28 -0500 Subject: drm/radeon/kms: fix 2D tiling CS support on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 38e1bda..cd4590a 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -38,6 +38,7 @@ struct evergreen_cs_track { u32 group_size; u32 nbanks; u32 npipes; + u32 row_size; /* value we track */ u32 nsamples; u32 cb_color_base_last[12]; @@ -77,6 +78,44 @@ struct evergreen_cs_track { struct radeon_bo *db_s_write_bo; }; +static u32 evergreen_cs_get_aray_mode(u32 tiling_flags) +{ + if (tiling_flags & RADEON_TILING_MACRO) + return ARRAY_2D_TILED_THIN1; + else if (tiling_flags & RADEON_TILING_MICRO) + return ARRAY_1D_TILED_THIN1; + else + return ARRAY_LINEAR_GENERAL; +} + +static u32 evergreen_cs_get_num_banks(u32 nbanks) +{ + switch (nbanks) { + case 2: + return ADDR_SURF_2_BANK; + case 4: + return ADDR_SURF_4_BANK; + case 8: + default: + return ADDR_SURF_8_BANK; + case 16: + return ADDR_SURF_16_BANK; + } +} + +static u32 evergreen_cs_get_tile_split(u32 row_size) +{ + switch (row_size) { + case 1: + default: + return ADDR_SURF_TILE_SPLIT_1KB; + case 2: + return ADDR_SURF_TILE_SPLIT_2KB; + case 4: + return ADDR_SURF_TILE_SPLIT_4KB; + } +} + static void evergreen_cs_track_init(struct evergreen_cs_track *track) { int i; @@ -490,12 +529,11 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } ib[idx] &= ~Z_ARRAY_MODE(0xf); track->db_z_info &= ~Z_ARRAY_MODE(0xf); + ib[idx] |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->db_z_info |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx] |= DB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= DB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); } } break; @@ -618,13 +656,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR8_INFO: @@ -640,13 +673,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR0_PITCH: @@ -701,6 +729,16 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR9_ATTRIB: case CB_COLOR10_ATTRIB: case CB_COLOR11_ATTRIB: + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= CB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + } break; case CB_COLOR0_DIM: case CB_COLOR1_DIM: @@ -1318,10 +1356,14 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); if (!p->keep_tiling_flags) { - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx+1+(i*8)+1] |= + TEX_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx+1+(i*8)+6] |= + TEX_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + ib[idx+1+(i*8)+7] |= + TEX_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + } } texture = reloc->robj; /* tex mip base */ @@ -1422,6 +1464,7 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) { struct radeon_cs_packet pkt; struct evergreen_cs_track *track; + u32 tmp; int r; if (p->track == NULL) { @@ -1430,9 +1473,63 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) if (track == NULL) return -ENOMEM; evergreen_cs_track_init(track); - track->npipes = p->rdev->config.evergreen.tiling_npipes; - track->nbanks = p->rdev->config.evergreen.tiling_nbanks; - track->group_size = p->rdev->config.evergreen.tiling_group_size; + if (p->rdev->family >= CHIP_CAYMAN) + tmp = p->rdev->config.cayman.tile_config; + else + tmp = p->rdev->config.evergreen.tile_config; + + switch (tmp & 0xf) { + case 0: + track->npipes = 1; + break; + case 1: + default: + track->npipes = 2; + break; + case 2: + track->npipes = 4; + break; + case 3: + track->npipes = 8; + break; + } + + switch ((tmp & 0xf0) >> 4) { + case 0: + track->nbanks = 4; + break; + case 1: + default: + track->nbanks = 8; + break; + case 2: + track->nbanks = 16; + break; + } + + switch ((tmp & 0xf00) >> 8) { + case 0: + track->group_size = 256; + break; + case 1: + default: + track->group_size = 512; + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: + track->row_size = 1; + break; + case 1: + default: + track->row_size = 2; + break; + case 2: + track->row_size = 4; + break; + } + p->track = track; } do { diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index b937c49..e00039e 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -899,6 +899,10 @@ #define DB_HTILE_DATA_BASE 0x28014 #define DB_Z_INFO 0x28040 # define Z_ARRAY_MODE(x) ((x) << 4) +# define DB_TILE_SPLIT(x) (((x) & 0x7) << 8) +# define DB_NUM_BANKS(x) (((x) & 0x3) << 12) +# define DB_BANK_WIDTH(x) (((x) & 0x3) << 16) +# define DB_BANK_HEIGHT(x) (((x) & 0x3) << 20) #define DB_STENCIL_INFO 0x28044 #define DB_Z_READ_BASE 0x28048 #define DB_STENCIL_READ_BASE 0x2804c @@ -951,6 +955,29 @@ # define CB_SF_EXPORT_FULL 0 # define CB_SF_EXPORT_NORM 1 #define CB_COLOR0_ATTRIB 0x28c74 +# define CB_TILE_SPLIT(x) (((x) & 0x7) << 5) +# define ADDR_SURF_TILE_SPLIT_64B 0 +# define ADDR_SURF_TILE_SPLIT_128B 1 +# define ADDR_SURF_TILE_SPLIT_256B 2 +# define ADDR_SURF_TILE_SPLIT_512B 3 +# define ADDR_SURF_TILE_SPLIT_1KB 4 +# define ADDR_SURF_TILE_SPLIT_2KB 5 +# define ADDR_SURF_TILE_SPLIT_4KB 6 +# define CB_NUM_BANKS(x) (((x) & 0x3) << 10) +# define ADDR_SURF_2_BANK 0 +# define ADDR_SURF_4_BANK 1 +# define ADDR_SURF_8_BANK 2 +# define ADDR_SURF_16_BANK 3 +# define CB_BANK_WIDTH(x) (((x) & 0x3) << 13) +# define ADDR_SURF_BANK_WIDTH_1 0 +# define ADDR_SURF_BANK_WIDTH_2 1 +# define ADDR_SURF_BANK_WIDTH_4 2 +# define ADDR_SURF_BANK_WIDTH_8 3 +# define CB_BANK_HEIGHT(x) (((x) & 0x3) << 16) +# define ADDR_SURF_BANK_HEIGHT_1 0 +# define ADDR_SURF_BANK_HEIGHT_2 1 +# define ADDR_SURF_BANK_HEIGHT_4 2 +# define ADDR_SURF_BANK_HEIGHT_8 3 #define CB_COLOR0_DIM 0x28c78 /* only CB0-7 blocks have these regs */ #define CB_COLOR0_CMASK 0x28c7c @@ -1137,7 +1164,11 @@ # define SQ_SEL_1 5 #define SQ_TEX_RESOURCE_WORD5_0 0x30014 #define SQ_TEX_RESOURCE_WORD6_0 0x30018 +# define TEX_TILE_SPLIT(x) (((x) & 0x7) << 29) #define SQ_TEX_RESOURCE_WORD7_0 0x3001c +# define TEX_BANK_WIDTH(x) (((x) & 0x3) << 8) +# define TEX_BANK_HEIGHT(x) (((x) & 0x3) << 10) +# define TEX_NUM_BANKS(x) (((x) & 0x3) << 16) #define SQ_VTX_CONSTANT_WORD0_0 0x30000 #define SQ_VTX_CONSTANT_WORD1_0 0x30004 -- cgit v0.10.2 From bab9efc206ba89766c53a9042eb771e87e68c42b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 28 Nov 2011 12:25:43 +0100 Subject: vmwgfx: integer overflow in vmw_kms_update_layout_ioctl() There are two issues in vmw_kms_update_layout_ioctl(). First, the for loop forgets to index rects and only checks the first element. Second, there is a potential integer overflow if userspace passes in a large arg->num_outputs. The call to kzalloc() would allocate a small buffer, leading to out-of-bounds read. Reported-by: Haogang Chen Signed-off-by: Xi Wang Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 880e285..37d4054 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1809,7 +1809,8 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect); - rects = kzalloc(rects_size, GFP_KERNEL); + rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect), + GFP_KERNEL); if (unlikely(!rects)) { ret = -ENOMEM; goto out_unlock; @@ -1824,10 +1825,10 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } for (i = 0; i < arg->num_outputs; ++i) { - if (rects->x < 0 || - rects->y < 0 || - rects->x + rects->w > mode_config->max_width || - rects->y + rects->h > mode_config->max_height) { + if (rects[i].x < 0 || + rects[i].y < 0 || + rects[i].x + rects[i].w > mode_config->max_width || + rects[i].y + rects[i].h > mode_config->max_height) { DRM_ERROR("Invalid GUI layout.\n"); ret = -EINVAL; goto out_free; -- cgit v0.10.2 From 550acb19269d65f32e9ac4ddb26c2b2070e37f1c Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Thu, 1 Dec 2011 13:55:08 +0200 Subject: genirq: Fix race condition when stopping the irq thread In irq_wait_for_interrupt(), the should_stop member is verified before setting the task's state to TASK_INTERRUPTIBLE and calling schedule(). In case kthread_stop sets should_stop and wakes up the process after should_stop is checked by the irq thread but before the task's state is changed, the irq thread might never exit: kthread_stop irq_wait_for_interrupt ------------ ---------------------- ... ... while (!kthread_should_stop()) { kthread->should_stop = 1; wake_up_process(k); wait_for_completion(&kthread->exited); ... set_current_state(TASK_INTERRUPTIBLE); ... schedule(); } Fix this by checking if the thread should stop after modifying the task's state. [ tglx: Simplified it a bit ] Signed-off-by: Ido Yariv Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 0e2b179..1da999f 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -623,8 +623,9 @@ static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id) static int irq_wait_for_interrupt(struct irqaction *action) { + set_current_state(TASK_INTERRUPTIBLE); + while (!kthread_should_stop()) { - set_current_state(TASK_INTERRUPTIBLE); if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags)) { @@ -632,7 +633,9 @@ static int irq_wait_for_interrupt(struct irqaction *action) return 0; } schedule(); + set_current_state(TASK_INTERRUPTIBLE); } + __set_current_state(TASK_RUNNING); return -1; } -- cgit v0.10.2 From dfaf3c036cd46a73f4ef3e4b75c1f647e503d4e1 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Fri, 2 Dec 2011 14:47:03 +0100 Subject: loop: Fix discard_alignment default setting discard_alignment is not relevant to the loop driver since it is supposed to be set as a workaround for the old sector 63 alignments. So set it to zero rather than block size. Signed-off-by: Lukas Czerner Reported-by: Milan Broz Signed-off-by: Jens Axboe diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 5579fda..1e888c9 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -797,7 +797,7 @@ static void loop_config_discard(struct loop_device *lo) } q->limits.discard_granularity = inode->i_sb->s_blocksize; - q->limits.discard_alignment = inode->i_sb->s_blocksize; + q->limits.discard_alignment = 0; q->limits.max_discard_sectors = UINT_MAX >> 9; q->limits.discard_zeroes_data = 1; queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); -- cgit v0.10.2 From cce4aa378a049f4275416ee6302dd24f37b289df Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Dec 2011 15:29:12 +0100 Subject: ALSA: hda/realtek - Fix Oops in alc_mux_select() When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cbde019..a7d1bc4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -297,6 +297,8 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, imux = &spec->input_mux[mux_idx]; if (!imux->num_items && mux_idx > 0) imux = &spec->input_mux[0]; + if (!imux->num_items) + return 0; if (idx >= imux->num_items) idx = imux->num_items - 1; -- cgit v0.10.2 From c1be84309c58b1e7c6d626e28fba41a22b364c3d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 Dec 2011 12:34:16 +0100 Subject: tick-broadcast: Stop active broadcast device when replacing it When a better rated broadcast device is installed, then the current active device is not disabled, which results in two running broadcast devices. Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index f954282..fd4a7b1 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -71,7 +71,7 @@ int tick_check_broadcast_device(struct clock_event_device *dev) (dev->features & CLOCK_EVT_FEAT_C3STOP)) return 0; - clockevents_exchange_device(NULL, dev); + clockevents_exchange_device(tick_broadcast_device.evtdev, dev); tick_broadcast_device.evtdev = dev; if (!cpumask_empty(tick_get_broadcast_mask())) tick_broadcast_start_periodic(dev); -- cgit v0.10.2 From de28f25e8244c7353abed8de0c7792f5f883588c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 Dec 2011 16:02:45 +0100 Subject: clockevents: Set noop handler in clockevents_exchange_device() If a device is shutdown, then there might be a pending interrupt, which will be processed after we reenable interrupts, which causes the original handler to be run. If the old handler is the (broadcast) periodic handler the shutdown state might hang the kernel completely. Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 1ecd6ba..c4eb71c 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -387,6 +387,7 @@ void clockevents_exchange_device(struct clock_event_device *old, * released list and do a notify add later. */ if (old) { + old->event_handler = clockevents_handle_noop; clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED); list_del(&old->list); list_add(&old->list, &clockevents_released); -- cgit v0.10.2 From 2151937d7ce491bfbe269a1ae742c6686904474c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 1 Dec 2011 08:06:52 -0800 Subject: ceph: fix rasize reporting by ceph_show_options Fix typo. Reported-by: mowang da Signed-off-by: Sage Weil diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 8dc73a5..b48f15f 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -383,7 +383,7 @@ static int ceph_show_options(struct seq_file *m, struct vfsmount *mnt) if (fsopt->rsize != CEPH_RSIZE_DEFAULT) seq_printf(m, ",rsize=%d", fsopt->rsize); if (fsopt->rasize != CEPH_RASIZE_DEFAULT) - seq_printf(m, ",rasize=%d", fsopt->rsize); + seq_printf(m, ",rasize=%d", fsopt->rasize); if (fsopt->congestion_kb != default_congestion_kb()) seq_printf(m, ",write_congestion_kb=%d", fsopt->congestion_kb); if (fsopt->caps_wanted_delay_min != CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT) -- cgit v0.10.2 From 87b86ade8bb07473596e2551de7bb64c1f44bbe4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 14 Aug 2011 13:39:20 +0900 Subject: ASoC: Mark WM8994 ADC muxes as virtual Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6c29885..d0c545b 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1325,15 +1325,15 @@ SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0), }; static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = { -SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), -SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), }; static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = { -SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), -SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), +SND_SOC_DAPM_VIRT_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), +SND_SOC_DAPM_VIRT_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), }; static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = { -- cgit v0.10.2 From 274b89ca3b006926cb9b45d78ab5906f4c0fc0aa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 2 Dec 2011 08:19:17 -0800 Subject: iwlagn: fix HW crypto for TX-only keys Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: Reinette Chatre Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index ed62836..4b2aa1d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1268,9 +1268,6 @@ int iwl_set_dynamic_key(struct iwl_priv *priv, switch (keyconf->cipher) { case WLAN_CIPHER_SUITE_TKIP: - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - if (sta) addr = sta->addr; else /* station mode case only */ @@ -1283,8 +1280,6 @@ int iwl_set_dynamic_key(struct iwl_priv *priv, seq.tkip.iv32, p1k, CMD_SYNC); break; case WLAN_CIPHER_SUITE_CCMP: - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - /* fall through */ case WLAN_CIPHER_SUITE_WEP40: case WLAN_CIPHER_SUITE_WEP104: ret = iwlagn_send_sta_key(priv, keyconf, sta_id, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index ccba69b..6094deab 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2316,6 +2316,17 @@ static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return -EOPNOTSUPP; } + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + /* fall through */ + case WLAN_CIPHER_SUITE_CCMP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + break; + default: + break; + } + /* * We could program these keys into the hardware as well, but we * don't expect much multicast traffic in IBSS and having keys -- cgit v0.10.2 From 34a5b4b6af104cf18eb50748509528b9bdbc4036 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 2 Dec 2011 08:19:18 -0800 Subject: iwlwifi: do not re-configure HT40 after associated The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [] ? warn_slowpath_common+0x73/0x87 kernel: [] ? ieee80211_reconfig+0x1f1/0x407 kernel: [] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [] ? ieee80211_restart_work+0x7e/0x87 kernel: [] ? process_one_work+0x1c8/0x2e3 kernel: [] ? worker_thread+0x17a/0x23a kernel: [] ? manage_workers.clone.18+0x15b/0x15b kernel: [] ? manage_workers.clone.18+0x15b/0x15b kernel: [] ? kthread+0x7a/0x82 kernel: [] ? kernel_thread_helper+0x4/0x10 kernel: [] ? kthread_flush_work_fn+0x11/0x11 kernel: [] ? gs_change+0xb/0xb Cc: 3.1+ Reported-by: Udo Steinberg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 58a381c..a7a6def 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -528,6 +528,24 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return 0; } +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx) +{ + if (conf_is_ht40_minus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_BELOW; + ctx->ht.is_40mhz = true; + } else if (conf_is_ht40_plus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + ctx->ht.is_40mhz = true; + } else { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_NONE; + ctx->ht.is_40mhz = false; + } +} + int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) { struct iwl_priv *priv = hw->priv; @@ -586,19 +604,11 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) ctx->ht.enabled = conf_is_ht(conf); if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } + /* if HT40 is used, it should not change + * after associated except channel switch */ + if (iwl_is_associated_ctx(ctx) && + !ctx->ht.is_40mhz) + iwlagn_config_ht40(conf, ctx); } else ctx->ht.is_40mhz = false; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6094deab..f556451 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2610,21 +2610,9 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, /* Configure HT40 channels */ ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } - } else + if (ctx->ht.enabled) + iwlagn_config_ht40(conf, ctx); + else ctx->ht.is_40mhz = false; if ((le16_to_cpu(ctx->staging.channel) != ch)) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 5b936ec..3856aba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -86,6 +86,8 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, u32 changes); +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx); /* uCode */ int iwlagn_rx_calib_result(struct iwl_priv *priv, -- cgit v0.10.2 From 9995ffe5f5fdddcc73e4465cc3f8b38714df8108 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 2 Dec 2011 08:19:19 -0800 Subject: iwlwifi: change the default behavior of watchdog timer The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index e12b48c..dd008b0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -191,6 +191,7 @@ static struct iwl_base_params iwl1000_base_params = { .chain_noise_scale = 1000, .wd_timeout = IWL_DEF_WD_TIMEOUT, .max_event_log_size = 128, + .wd_disable = true, }; static struct iwl_ht_params iwl1000_ht_params = { .ht_greenfield_support = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index c511c98..f55fb2d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -364,6 +364,7 @@ static struct iwl_base_params iwl5000_base_params = { .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, .no_idle_support = true, + .wd_disable = true, }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f556451..bacc06c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3498,9 +3498,10 @@ MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO); MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])"); -module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO); +module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO); MODULE_PARM_DESC(wd_disable, - "Disable stuck queue watchdog timer (default: 0 [enabled])"); + "Disable stuck queue watchdog timer 0=system default, " + "1=disable, 2=enable (default: 0)"); /* * set bt_coex_active to true, uCode will do kill/defer diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 001fdf1..fcf5416 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1810,11 +1810,23 @@ void iwl_setup_watchdog(struct iwl_priv *priv) { unsigned int timeout = priv->cfg->base_params->wd_timeout; - if (timeout && !iwlagn_mod_params.wd_disable) - mod_timer(&priv->watchdog, - jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout))); - else - del_timer(&priv->watchdog); + if (!iwlagn_mod_params.wd_disable) { + /* use system default */ + if (timeout && !priv->cfg->base_params->wd_disable) + mod_timer(&priv->watchdog, + jiffies + + msecs_to_jiffies(IWL_WD_TICK(timeout))); + else + del_timer(&priv->watchdog); + } else { + /* module parameter overwrite default configuration */ + if (timeout && iwlagn_mod_params.wd_disable == 2) + mod_timer(&priv->watchdog, + jiffies + + msecs_to_jiffies(IWL_WD_TICK(timeout))); + else + del_timer(&priv->watchdog); + } } /** diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 137da33..f2fc288 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -113,6 +113,7 @@ struct iwl_lib_ops { * @shadow_reg_enable: HW shadhow register bit * @no_idle_support: do not support idle mode * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up + * wd_disable: disable watchdog timer */ struct iwl_base_params { int eeprom_size; @@ -134,6 +135,7 @@ struct iwl_base_params { const bool shadow_reg_enable; const bool no_idle_support; const bool hd_v2; + const bool wd_disable; }; /* * @advanced_bt_coexist: support advanced bt coexist diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h index 1f7a93c..14eaf37 100644 --- a/drivers/net/wireless/iwlwifi/iwl-shared.h +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h @@ -120,7 +120,7 @@ extern struct iwl_mod_params iwlagn_mod_params; * @restart_fw: restart firmware, default = 1 * @plcp_check: enable plcp health check, default = true * @ack_check: disable ack health check, default = false - * @wd_disable: enable stuck queue check, default = false + * @wd_disable: enable stuck queue check, default = 0 * @bt_coex_active: enable bt coex, default = true * @led_mode: system default, default = 0 * @no_sleep_autoadjust: disable autoadjust, default = true @@ -141,7 +141,7 @@ struct iwl_mod_params { int restart_fw; bool plcp_check; bool ack_check; - bool wd_disable; + int wd_disable; bool bt_coex_active; int led_mode; bool no_sleep_autoadjust; -- cgit v0.10.2 From a99ebf43f49f4499ab0e2a8a9132ad6ed6ba2409 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 1 Dec 2011 11:24:20 +0000 Subject: xfs: fix allocation length overflow in xfs_bmapi_write() When testing the new xfstests --large-fs option that does very large file preallocations, this assert was tripped deep in xfs_alloc_vextent(): XFS: Assertion failed: args->minlen <= args->maxlen, file: fs/xfs/xfs_alloc.c, line: 2239 The allocation was trying to allocate a zero length extent because the lower 32 bits of the allocation length was zero. The remaining length of the allocation to be done was an exact multiple of 2^32 - the first case I saw was at 496TB remaining to be allocated. This turns out to be an overflow when converting the allocation length (a 64 bit quantity) into the extent length to allocate (a 32 bit quantity), and it requires the length to be allocated an exact multiple of 2^32 blocks to trip the assert. Fix it by limiting the extent lenth to allocate to MAXEXTLEN. Signed-off-by: Dave Chinner Signed-off-by: Ben Myers Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index c68baeb..d0ab788 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -2383,6 +2383,8 @@ xfs_bmap_btalloc( int tryagain; int error; + ASSERT(ap->length); + mp = ap->ip->i_mount; align = ap->userdata ? xfs_get_extsz_hint(ap->ip) : 0; if (unlikely(align)) { @@ -4629,6 +4631,8 @@ xfs_bmapi_allocate( int error; int rt; + ASSERT(bma->length > 0); + rt = (whichfork == XFS_DATA_FORK) && XFS_IS_REALTIME_INODE(bma->ip); /* @@ -4849,6 +4853,7 @@ xfs_bmapi_write( ASSERT(*nmap <= XFS_BMAP_MAX_NMAP); ASSERT(!(flags & XFS_BMAPI_IGSTATE)); ASSERT(tp != NULL); + ASSERT(len > 0); whichfork = (flags & XFS_BMAPI_ATTRFORK) ? XFS_ATTR_FORK : XFS_DATA_FORK; @@ -4918,9 +4923,22 @@ xfs_bmapi_write( bma.eof = eof; bma.conv = !!(flags & XFS_BMAPI_CONVERT); bma.wasdel = wasdelay; - bma.length = len; bma.offset = bno; + /* + * There's a 32/64 bit type mismatch between the + * allocation length request (which can be 64 bits in + * length) and the bma length request, which is + * xfs_extlen_t and therefore 32 bits. Hence we have to + * check for 32-bit overflows and handle them here. + */ + if (len > (xfs_filblks_t)MAXEXTLEN) + bma.length = MAXEXTLEN; + else + bma.length = len; + + ASSERT(len > 0); + ASSERT(bma.length > 0); error = xfs_bmapi_allocate(&bma, flags); if (error) goto error0; -- cgit v0.10.2 From 54a8a79c55ce283c94ce4c67a98d28c21830405a Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Nov 2011 09:32:57 +0800 Subject: btusb: fix a memory leak in btusb_send_frame() This patch fixes the following memory leak reported by kmemleak: unreferenced object 0xffff880060a53840 (size 192): comm "softirq", pid 0, jiffies 4320571771 (age 1406.569s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] create_object+0x187/0x28b [] kmemleak_alloc+0x73/0x98 [] __kmalloc+0xfc/0x123 [] usb_alloc_urb+0x1e/0x48 [] btusb_send_frame+0x86/0x385 [btusb] [] hci_send_frame+0xa0/0xa5 [bluetooth] [] hci_cmd_task+0xa0/0xfb [bluetooth] [] tasklet_action+0x8f/0xef [] __do_softirq+0xf4/0x1db [] run_ksoftirqd+0x84/0x129 [] kthread+0xa0/0xa8 [] kernel_thread_helper+0x4/0x10 [] 0xffffffffffffffff The problem is that when inc_tx() returns non-zero, we forgot to call usb_free_urb(). Cc: Marcel Holtmann Cc: "Gustavo F. Padovan" Signed-off-by: WANG Cong Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index fe4ebc3..eabc437 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -777,9 +777,8 @@ skip_waking: usb_mark_last_busy(data->udev); } - usb_free_urb(urb); - done: + usb_free_urb(urb); return err; } -- cgit v0.10.2 From 33cb722c22f28964a501a56cc76397834c221c7a Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 23 Nov 2011 11:23:34 +0200 Subject: Bluetooth: Correct version check in hci_setup Check for hci_ver instead of lmp_ver Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index d7d96b6..643a41b 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -545,7 +545,7 @@ static void hci_setup(struct hci_dev *hdev) { hci_setup_event_mask(hdev); - if (hdev->lmp_ver > 1) + if (hdev->hci_ver > 1) hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); if (hdev->features[6] & LMP_SIMPLE_PAIR) { -- cgit v0.10.2 From f61759e6b831a55b89e584b198c3da325e2bc379 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 2 Dec 2011 11:39:42 +0000 Subject: ipv4: make sure RTO_ONLINK is saved in routing cache __mkroute_output fails to work with the original tos and uses value with stripped RTO_ONLINK bit. Make sure we put the original TOS bits into rt_key_tos because it used to match cached route. Signed-off-by: Julian Anastasov Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index ca5e237..588d971 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -112,7 +112,7 @@ #include #define RT_FL_TOS(oldflp4) \ - ((u32)(oldflp4->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK))) + ((oldflp4)->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK)) #define IP_MAX_MTU 0xFFF0 @@ -2441,11 +2441,11 @@ EXPORT_SYMBOL(ip_route_input_common); static struct rtable *__mkroute_output(const struct fib_result *res, const struct flowi4 *fl4, __be32 orig_daddr, __be32 orig_saddr, - int orig_oif, struct net_device *dev_out, + int orig_oif, __u8 orig_rtos, + struct net_device *dev_out, unsigned int flags) { struct fib_info *fi = res->fi; - u32 tos = RT_FL_TOS(fl4); struct in_device *in_dev; u16 type = res->type; struct rtable *rth; @@ -2496,7 +2496,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res, rth->rt_genid = rt_genid(dev_net(dev_out)); rth->rt_flags = flags; rth->rt_type = type; - rth->rt_key_tos = tos; + rth->rt_key_tos = orig_rtos; rth->rt_dst = fl4->daddr; rth->rt_src = fl4->saddr; rth->rt_route_iif = 0; @@ -2546,7 +2546,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res, static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4) { struct net_device *dev_out = NULL; - u32 tos = RT_FL_TOS(fl4); + __u8 tos = RT_FL_TOS(fl4); unsigned int flags = 0; struct fib_result res; struct rtable *rth; @@ -2722,7 +2722,7 @@ static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4) make_route: rth = __mkroute_output(&res, fl4, orig_daddr, orig_saddr, orig_oif, - dev_out, flags); + tos, dev_out, flags); if (!IS_ERR(rth)) { unsigned int hash; -- cgit v0.10.2 From 36d54dc0c893b143748bcf13a1e3b7a00696115d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 3 Dec 2011 18:38:25 +0800 Subject: ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig index 8f49e16..c62d715 100644 --- a/sound/soc/kirkwood/Kconfig +++ b/sound/soc/kirkwood/Kconfig @@ -12,6 +12,7 @@ config SND_KIRKWOOD_SOC_I2S config SND_KIRKWOOD_SOC_OPENRD tristate "SoC Audio support for Kirkwood Openrd Client" depends on SND_KIRKWOOD_SOC && (MACH_OPENRD_CLIENT || MACH_OPENRD_ULTIMATE) + depends on I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_CS42L51 help @@ -20,7 +21,7 @@ config SND_KIRKWOOD_SOC_OPENRD config SND_KIRKWOOD_SOC_T5325 tristate "SoC Audio support for HP t5325" - depends on SND_KIRKWOOD_SOC && MACH_T5325 + depends on SND_KIRKWOOD_SOC && MACH_T5325 && I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_ALC5623 help -- cgit v0.10.2 From e5fd47bfab2df0c2184cc0bf4245d8e1bb7724fb Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 21 Nov 2011 18:02:02 -0500 Subject: xen/pm_idle: Make pm_idle be default_idle under Xen. The idea behind commit d91ee5863b71 ("cpuidle: replace xen access to x86 pm_idle and default_idle") was to have one call - disable_cpuidle() which would make pm_idle not be molested by other code. It disallows cpuidle_idle_call to be set to pm_idle (which is excellent). But in the select_idle_routine() and idle_setup(), the pm_idle can still be set to either: amd_e400_idle, mwait_idle or default_idle. This depends on some CPU flags (MWAIT) and in AMD case on the type of CPU. In case of mwait_idle we can hit some instances where the hypervisor (Amazon EC2 specifically) sets the MWAIT and we get: Brought up 2 CPUs invalid opcode: 0000 [#1] SMP Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1 RIP: e030:[] [] mwait_idle+0x6f/0xb4 ... Call Trace: [] cpu_idle+0xae/0xe8 [] cpu_bringup_and_idle+0xe/0x10 RIP [] mwait_idle+0x6f/0xb4 RSP In the case of amd_e400_idle we don't get so spectacular crashes, but we do end up making an MSR which is trapped in the hypervisor, and then follow it up with a yield hypercall. Meaning we end up going to hypervisor twice instead of just once. The previous behavior before v3.0 was that pm_idle was set to default_idle regardless of select_idle_routine/idle_setup. We want to do that, but only for one specific case: Xen. This patch does that. Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index c2ff2a1..2d2f01c 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -401,6 +401,7 @@ extern unsigned long arch_align_stack(unsigned long sp); extern void free_init_pages(char *what, unsigned long begin, unsigned long end); void default_idle(void); +bool set_pm_idle_to_default(void); void stop_this_cpu(void *dummy); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index b9b3b1a..ee5d4fb 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -403,6 +403,14 @@ void default_idle(void) EXPORT_SYMBOL(default_idle); #endif +bool set_pm_idle_to_default(void) +{ + bool ret = !!pm_idle; + + pm_idle = default_idle; + + return ret; +} void stop_this_cpu(void *dummy) { local_irq_disable(); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4..1093f80 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -410,6 +410,6 @@ void __init xen_arch_setup(void) #endif disable_cpuidle(); boot_option_idle_override = IDLE_HALT; - + WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); } -- cgit v0.10.2 From 3989efb77046ad334518b6cddcf817184affe7c9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 11:37:20 -0500 Subject: arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. The empty_zero_page[] export is required for ZERO_PAGE() module references. The #includes are due to changes in implicit inclusion, and should of course have been in the sources from the beginning. Signed-off-by: Chris Metcalf diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658f2ce..b3ed19f 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index 2a8014c..9d610d3 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c index b671a86..6029082 100644 --- a/arch/tile/kernel/sysfs.c +++ b/arch/tile/kernel/sysfs.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* Return a string queried from the hypervisor, truncated to page size. */ diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index a87d2a8..2a81d32 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm); EXPORT_SYMBOL(current_text_addr); EXPORT_SYMBOL(dump_stack); +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + /* arch/tile/lib/, various memcpy files */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__copy_to_user_inatomic); -- cgit v0.10.2 From c2851a9b1caa420c2cdbd517617166990e3723c0 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:51:05 -0500 Subject: arch/tile: fix double-free bug in homecache_free_pages() When freeing the page with this API, the page was "put" twice. This was only discovered bringing up an MPT fusion controller, which actually used the API; it hadn't been invoked previously, so the bug had gone unnoticed. Signed-off-by: Chris Metcalf diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index cbe6f4f..1cc6ae4 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order) VM_BUG_ON(!virt_addr_valid((void *)addr)); page = virt_to_page((void *)addr); if (put_page_testzero(page)) { - int pages = (1 << order); homecache_change_page_home(page, order, initial_page_home()); - while (pages--) - __free_page(page++); + if (order == 0) { + free_hot_cold_page(page, 0); + } else { + init_page_count(page); + __free_pages(page, order); + } } } -- cgit v0.10.2 From a67ba43d30bf8c1cfdc2615439455302d2408453 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:54:31 -0500 Subject: asm-generic/unistd.h: support new process_vm_{readv,write} syscalls Also prototype the "compat" functions so they can be referenced from C code. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index f4c38d8c..2292d1a 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -685,9 +685,15 @@ __SYSCALL(__NR_syncfs, sys_syncfs) __SYSCALL(__NR_setns, sys_setns) #define __NR_sendmmsg 269 __SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg) +#define __NR_process_vm_readv 270 +__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ + compat_sys_process_vm_readv) +#define __NR_process_vm_writev 271 +__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ + compat_sys_process_vm_writev) #undef __NR_syscalls -#define __NR_syscalls 270 +#define __NR_syscalls 272 /* * All syscalls below here should go away really, diff --git a/include/linux/compat.h b/include/linux/compat.h index 154bf56..66ed067 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -552,5 +552,14 @@ extern ssize_t compat_rw_copy_check_uvector(int type, extern void __user *compat_alloc_user_space(unsigned long len); +asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); +asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ -- cgit v0.10.2 From 781a5e92bc3b666bc5752e3ce7e977978c2f64e9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:56:03 -0500 Subject: drivers/net/ethernet/tile: use skb_frag_page() API This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf Acked-by: David S. Miller diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 10826d8..1c0f9fa 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -1697,7 +1697,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, for (i = 0; i < sh->nr_frags; i++) { skb_frag_t *f = &sh->frags[i]; - unsigned long pfn = page_to_pfn(f->page); + unsigned long pfn = page_to_pfn(skb_frag_page(f)); /* FIXME: Compute "hash_for_home" properly. */ /* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */ @@ -1706,7 +1706,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, /* FIXME: Hmmm. */ if (!hash_default) { void *va = pfn_to_kaddr(pfn) + f->page_offset; - BUG_ON(PageHighMem(f->page)); + BUG_ON(PageHighMem(skb_frag_page(f))); finv_buffer_remote(va, f->size, 0); } -- cgit v0.10.2 From 0c90547b4a3fcee184db4d54ffc1a4fb17fd54d6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:58:19 -0500 Subject: arch/tile: use new generic {enable,disable}_percpu_irq() routines We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 94e9a51..f80f8ce 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -74,16 +74,6 @@ enum { */ void tile_irq_activate(unsigned int irq, int tile_irq_type); -/* - * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know - * how to use enable/disable_percpu_irq() to manage interrupts on each - * core. We can't use the generic enable/disable_irq() because they - * use a single reference count per irq, rather than per cpu per irq. - */ -void enable_percpu_irq(unsigned int irq); -void disable_percpu_irq(unsigned int irq); - - void setup_irq_regs(void); #endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index aa0134d..02e6280 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum) * Remove an irq from the disabled mask. If we're in an interrupt * context, defer enabling the HW interrupt until we leave. */ -void enable_percpu_irq(unsigned int irq) +static void tile_irq_chip_enable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) &= ~(1UL << irq); + get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); if (__get_cpu_var(irq_depth) == 0) - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(enable_percpu_irq); /* * Add an irq to the disabled mask. We disable the HW interrupt @@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq); * in an interrupt context, the return path is careful to avoid * unmasking a newly disabled interrupt. */ -void disable_percpu_irq(unsigned int irq) +static void tile_irq_chip_disable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) |= (1UL << irq); - mask_irqs(1UL << irq); + get_cpu_var(irq_disable_mask) |= (1UL << d->irq); + mask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ static void tile_irq_chip_mask(struct irq_data *d) @@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d) static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", + .irq_enable = tile_irq_chip_enable, + .irq_disable = tile_irq_chip_disable, .irq_ack = tile_irq_chip_ack, .irq_eoi = tile_irq_chip_eoi, .irq_mask = tile_irq_chip_mask, diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 1c0f9fa..1187a11 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -926,7 +926,7 @@ static int tile_net_poll(struct napi_struct *napi, int budget) goto done; /* Re-enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); /* HACK: Avoid the "rotting packet" problem (see above). */ if (qup->__packet_receive_read != @@ -1296,7 +1296,7 @@ static void tile_net_open_enable(void *dev_ptr) info->napi_enabled = true; /* Enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); } -- cgit v0.10.2 From f0a4cf31017ac8179a2fe295c1bd8e821d7674f4 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 12:43:40 +0000 Subject: sparc: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 7429b47..381edcd 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev, dp->rcv_buf_len = 4096; - dp->ds_states = kzalloc(sizeof(ds_states_template), - GFP_KERNEL); + dp->ds_states = kmemdup(ds_states_template, + sizeof(ds_states_template), GFP_KERNEL); if (!dp->ds_states) goto out_free_rcv_buf; - memcpy(dp->ds_states, ds_states_template, - sizeof(ds_states_template)); dp->num_ds_states = ARRAY_SIZE(ds_states_template); for (i = 0; i < dp->num_ds_states; i++) diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 4661480..741df91 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *new_val; int err; - new_val = kmalloc(len, GFP_KERNEL); + new_val = kmemdup(val, len, GFP_KERNEL); if (!new_val) return -ENOMEM; - memcpy(new_val, val, len); - err = -ENODEV; mutex_lock(&of_set_property_mutex); -- cgit v0.10.2 From e410471029ba99e85af5e2a1e7e747c7b4de2bc3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 21 Nov 2011 21:42:20 +0000 Subject: bbc_i2c: Remove unneeded err variable Signed-off-by: Axel Lin Signed-off-by: David S. Miller diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index 5f94d22..a0d1399 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -233,13 +233,9 @@ int bbc_i2c_write_buf(struct bbc_i2c_client *client, int ret = 0; while (len > 0) { - int err = bbc_i2c_writeb(client, *buf, off); - - if (err < 0) { - ret = err; + ret = bbc_i2c_writeb(client, *buf, off); + if (ret < 0) break; - } - len--; buf++; off++; @@ -253,11 +249,9 @@ int bbc_i2c_read_buf(struct bbc_i2c_client *client, int ret = 0; while (len > 0) { - int err = bbc_i2c_readb(client, buf, off); - if (err < 0) { - ret = err; + ret = bbc_i2c_readb(client, buf, off); + if (ret < 0) break; - } len--; buf++; off++; -- cgit v0.10.2 From dbf2b92d54e73e4a2524b90d29bd498ecc4aa593 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 26 Nov 2011 19:04:25 +0000 Subject: sbus: convert drivers/sbus/char/* to use module_platform_driver() This patch converts the drivers in drivers/sbus/char/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin Signed-off-by: David S. Miller diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index a0d1399..5426682 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -416,17 +416,6 @@ static struct platform_driver bbc_i2c_driver = { .remove = __devexit_p(bbc_i2c_remove), }; -static int __init bbc_i2c_init(void) -{ - return platform_driver_register(&bbc_i2c_driver); -} - -static void __exit bbc_i2c_exit(void) -{ - platform_driver_unregister(&bbc_i2c_driver); -} - -module_init(bbc_i2c_init); -module_exit(bbc_i2c_exit); +module_platform_driver(bbc_i2c_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c index 965a1fc..4b99397 100644 --- a/drivers/sbus/char/display7seg.c +++ b/drivers/sbus/char/display7seg.c @@ -275,15 +275,4 @@ static struct platform_driver d7s_driver = { .remove = __devexit_p(d7s_remove), }; -static int __init d7s_init(void) -{ - return platform_driver_register(&d7s_driver); -} - -static void __exit d7s_exit(void) -{ - platform_driver_unregister(&d7s_driver); -} - -module_init(d7s_init); -module_exit(d7s_exit); +module_platform_driver(d7s_driver); diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index be7b4e5..339fd6f 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -1138,16 +1138,6 @@ static struct platform_driver envctrl_driver = { .remove = __devexit_p(envctrl_remove), }; -static int __init envctrl_init(void) -{ - return platform_driver_register(&envctrl_driver); -} - -static void __exit envctrl_exit(void) -{ - platform_driver_unregister(&envctrl_driver); -} +module_platform_driver(envctrl_driver); -module_init(envctrl_init); -module_exit(envctrl_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c index 73dd4e7..826157f 100644 --- a/drivers/sbus/char/flash.c +++ b/drivers/sbus/char/flash.c @@ -216,16 +216,6 @@ static struct platform_driver flash_driver = { .remove = __devexit_p(flash_remove), }; -static int __init flash_init(void) -{ - return platform_driver_register(&flash_driver); -} - -static void __exit flash_cleanup(void) -{ - platform_driver_unregister(&flash_driver); -} +module_platform_driver(flash_driver); -module_init(flash_init); -module_exit(flash_cleanup); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index ebce963..0b31658 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -435,16 +435,6 @@ static struct platform_driver uctrl_driver = { }; -static int __init uctrl_init(void) -{ - return platform_driver_register(&uctrl_driver); -} - -static void __exit uctrl_exit(void) -{ - platform_driver_unregister(&uctrl_driver); -} +module_platform_driver(uctrl_driver); -module_init(uctrl_init); -module_exit(uctrl_exit); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 8e8da023f5af71662867729db5547dc54786093c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Dec 2011 11:57:09 -0800 Subject: x86: Fix boot failures on older AMD CPU's People with old AMD chips are getting hung boots, because commit bcb80e53877c ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") moved the microcode detection too early into "early_init_amd()". At that point we are *so* early in the booth that the exception tables haven't even been set up yet, so the whole rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); doesn't actually work: if the rdmsr does a GP fault (due to non-existant MSR register on older CPU's), we can't fix it up yet, and the boot fails. Fix it by simply moving the code to a slightly later point in the boot (init_amd() instead of early_init_amd()), since the kernel itself doesn't even really care about the microcode patchlevel at this point (or really ever: it's made available to user space in /proc/cpuinfo, and updated if you do a microcode load). Reported-tested-and-bisected-by: Larry Finger Tested-by: Bob Tracy Acked-by: Borislav Petkov Cc: Ingo Molnar Cc: Srivatsa S. Bhat Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index c7e46cb..0bab2b1 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -442,8 +442,6 @@ static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c) static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { - u32 dummy; - early_init_amd_mc(c); /* @@ -473,12 +471,12 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); } #endif - - rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) { + u32 dummy; + #ifdef CONFIG_SMP unsigned long long value; @@ -657,6 +655,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask); } } + + rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } #ifdef CONFIG_X86_32 -- cgit v0.10.2 From ef1497707c69f3805bbca97c5d10c2913b6d2fa1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 19:35:20 +0800 Subject: ASoC: uda1380: Return proper error in uda1380_modinit failure path Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index c5ca8cf..0441893 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -863,13 +863,13 @@ static struct i2c_driver uda1380_i2c_driver = { static int __init uda1380_modinit(void) { - int ret; + int ret = 0; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&uda1380_i2c_driver); if (ret != 0) pr_err("Failed to register UDA1380 I2C driver: %d\n", ret); #endif - return 0; + return ret; } module_init(uda1380_modinit); -- cgit v0.10.2 From b971c370a4d265848d9df0793b2f7fcc5b16b378 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:30:18 +0800 Subject: ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index ffd2242..a0f7d3c 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -151,6 +151,7 @@ config SND_SOC_ZYLONITE config SND_SOC_RAUMFELD tristate "SoC Audio support Raumfeld audio adapter" depends on SND_PXA2XX_SOC && (MACH_RAUMFELD_SPEAKER || MACH_RAUMFELD_CONNECTOR) + depends on I2C && SPI_MASTER select SND_PXA_SOC_SSP select SND_SOC_CS4270 select SND_SOC_AK4104 @@ -159,7 +160,7 @@ config SND_SOC_RAUMFELD config SND_PXA2XX_SOC_HX4700 tristate "SoC Audio support for HP iPAQ hx4700" - depends on SND_PXA2XX_SOC && MACH_H4700 + depends on SND_PXA2XX_SOC && MACH_H4700 && I2C select SND_PXA2XX_SOC_I2S select SND_SOC_AK4641 help -- cgit v0.10.2 From 570a2429e964f8d63338b3450ba801a263b29b3a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:11:16 +0800 Subject: ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index b133bfc..7383917 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -28,7 +28,7 @@ config SND_MXC_SOC_WM1133_EV1 config SND_SOC_MX27VIS_AIC32X4 tristate "SoC audio support for Visstrim M10 boards" - depends on MACH_IMX27_VISSTRIM_M10 + depends on MACH_IMX27_VISSTRIM_M10 && I2C select SND_SOC_TLV320AIC32X4 select SND_MXC_SOC_MX2 help -- cgit v0.10.2 From 52cef189165d74a5d6030184a8e05595194c69ca Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 28 Nov 2011 21:12:40 +0100 Subject: slab, lockdep: Fix silly bug Commit 30765b92 ("slab, lockdep: Annotate the locks before using them") moves the init_lock_keys() call from after g_cpucache_up = FULL, to before it. And overlooks the fact that init_node_lock_keys() tests for it and ignores everything !FULL. Introduce a LATE stage and change the lockdep test to be Cc: Pekka Enberg Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/mm/slab.c b/mm/slab.c index 708efe8..83311c9a 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -595,6 +595,7 @@ static enum { PARTIAL_AC, PARTIAL_L3, EARLY, + LATE, FULL } g_cpucache_up; @@ -671,7 +672,7 @@ static void init_node_lock_keys(int q) { struct cache_sizes *s = malloc_sizes; - if (g_cpucache_up != FULL) + if (g_cpucache_up < LATE) return; for (s = malloc_sizes; s->cs_size != ULONG_MAX; s++) { @@ -1666,6 +1667,8 @@ void __init kmem_cache_init_late(void) { struct kmem_cache *cachep; + g_cpucache_up = LATE; + /* Annotate slab for lockdep -- annotate the malloc caches */ init_lock_keys(); -- cgit v0.10.2 From 69682b625a043b567873e6cda397969b502f0054 Mon Sep 17 00:00:00 2001 From: Mitsuo Hayasaka Date: Tue, 29 Nov 2011 15:08:21 +0900 Subject: x86: Add user_mode_vm check in stack_overflow_check The kernel stack overflow is checked in stack_overflow_check(), which may wrongly detect the overflow if the stack pointer in user space points to the kernel stack intentionally or accidentally. So, the actual overflow is never detected after this misdetection because WARN_ONCE() is used on the detection of it. This patch adds user-mode-vm checking before it to avoid this problem and bails out early if the user stack is used. Signed-off-by: Mitsuo Hayasaka Cc: yrl.pp-manager.tt@hitachi.com Cc: Randy Dunlap Link: http://lkml.kernel.org/r/20111129060821.11076.55315.stgit@ltc219.sdl.hitachi.co.jp Signed-off-by: Ingo Molnar Cc: "H. Peter Anvin" diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index acf8fbf..69bca46 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW u64 curbase = (u64)task_stack_page(current); + if (user_mode_vm(regs)) + return; + WARN_ONCE(regs->sp >= curbase && regs->sp <= curbase + THREAD_SIZE && regs->sp < curbase + sizeof(struct thread_info) + -- cgit v0.10.2 From b495e039b4ce2ce4a96b3006004faf082f4d50e2 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Nov 2011 15:00:58 -0600 Subject: x86, UV: Fix UV2 hub part number There was a mixup when the SGI UV2 hub chip was sent to be fabricated, and it ended up with the wrong part number in the HRP_NODE_ID mmr. Future versions of the chip will (may) have the correct part number. Change the UV infrastructure to recognize both part numbers as valid IDs of a UV2 hub chip. Signed-off-by: Jack Steiner Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 10474fb..cf1d736 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -57,6 +57,7 @@ #define UV1_HUB_PART_NUMBER 0x88a5 #define UV2_HUB_PART_NUMBER 0x8eb8 +#define UV2_HUB_PART_NUMBER_X 0x1111 /* Compat: if this #define is present, UV headers support UV2 */ #define UV2_HUB_IS_SUPPORTED 1 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 62ae300..9d59bba 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void) if (node_id.s.part_number == UV2_HUB_PART_NUMBER) uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; + if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X) + uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; uv_hub_info->hub_revision = uv_min_hub_revision_id; pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); -- cgit v0.10.2 From 8f9a0981aca6bd454ef2a4bdac510af0f6e55bd4 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:06 +0530 Subject: ARM: davinci: psc: fix incorrect mask There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c09..8bf279a 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdf..a0e1770 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -80,7 +80,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { + if ((pdstat & PDSTAT_STATE_MASK) == 0) { pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; __raw_writel(pdctl1, psc_base + PDCTL1); -- cgit v0.10.2 From 78b838252fa986f66c7ec8047726ea500a08d98f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:07 +0530 Subject: ARM: davinci: psc: fix incorrect offsets Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bf279a..8bc3fc2 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -246,6 +246,8 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a0e1770..d7e210f 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); -- cgit v0.10.2 From 9ab409e402cbfde11e2516be43921954db480f4d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 15 Nov 2011 01:42:08 +0530 Subject: ARM: davinci: dm646x does not have a DSP domain Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed5..af27c13 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; -- cgit v0.10.2 From 83713fc9373be2e943f82e9d36213708c6b0050e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 14 Nov 2011 19:20:49 +0100 Subject: ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Sekhar Nori Cc: stable@kernel.org diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f..635bf77 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); -- cgit v0.10.2 From f1b21c525693b0159aed83b5871f2d0f077f208e Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 10 Nov 2011 11:43:21 +0530 Subject: ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Sekhar Nori Cc: # v2.6.36.x and above diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d249..6659a90 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, -- cgit v0.10.2 From 45fc4cce939adc883fba5e02f1f3e0e9ff020c30 Mon Sep 17 00:00:00 2001 From: "Shankarmurthy,Akshay" Date: Wed, 9 Nov 2011 17:55:20 +0530 Subject: ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae7..46e1f41 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ -- cgit v0.10.2 From 6be30bb7d7504ec687a65c9bbdae8d1d2f8eaa19 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 16 Nov 2011 00:19:51 +0100 Subject: x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot Dell OptiPlex 990 is known to require PCI reboot, so add it to the reboot blacklist in pci_reboot_dmi_table[]. Signed-off-by: Rafael J. Wysocki Link: http://lkml.kernel.org/r/201111160019.51303.rjw@sisk.pl Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e334be1..4463d2f 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -443,6 +443,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, { } }; -- cgit v0.10.2 From 48bc5562103412590e4487b666b49e7b6c84ba44 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Wed, 16 Nov 2011 16:07:22 +0000 Subject: x86,mrst: Power control commands update On the Intel MID devices SCU commands are issued to manage power off and the like. We need to issue different ones for non-Lincroft based devices. Signed-off-by: Alek Du Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h index 4420993..925b605 100644 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ b/arch/x86/include/asm/intel_scu_ipc.h @@ -3,11 +3,15 @@ #include -#define IPCMSG_VRTC 0xFA /* Set vRTC device */ - -/* Command id associated with message IPCMSG_VRTC */ -#define IPC_CMD_VRTC_SETTIME 1 /* Set time */ -#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ +#define IPCMSG_WARM_RESET 0xF0 +#define IPCMSG_COLD_RESET 0xF1 +#define IPCMSG_SOFT_RESET 0xF2 +#define IPCMSG_COLD_BOOT 0xF3 + +#define IPCMSG_VRTC 0xFA /* Set vRTC device */ + /* Command id associated with message IPCMSG_VRTC */ + #define IPC_CMD_VRTC_SETTIME 1 /* Set time */ + #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ /* Read single register */ int intel_scu_ipc_ioread8(u16 addr, u8 *data); diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index b1489a0..fedc3d7 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; EXPORT_SYMBOL_GPL(sfi_mrtc_array); int sfi_mrtc_num; +static void mrst_power_off(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1); +} + +static void mrst_reboot(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); + else + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); +} + /* parse all the mtimer info to a static mtimer array */ static int __init sfi_parse_mtmr(struct sfi_table_header *table) { @@ -265,17 +279,6 @@ static int mrst_i8042_detect(void) return 0; } -/* Reboot and power off are handled by the SCU on a MID device */ -static void mrst_power_off(void) -{ - intel_scu_ipc_simple_command(0xf1, 1); -} - -static void mrst_reboot(void) -{ - intel_scu_ipc_simple_command(0xf1, 0); -} - /* * Moorestown does not have external NMI source nor port 0x61 to report * NMI status. The possible NMI sources are from pmu as a result of NMI -- cgit v0.10.2 From 28744b3e9c85ea281d6371d4914c2498bceec10c Mon Sep 17 00:00:00 2001 From: Jekyll Lai Date: Wed, 16 Nov 2011 18:01:20 +0000 Subject: mrst: Added some platform data for the SFI translations Add SFI glue for the following devices: tca6416: a gpio expander compatible with max7315 mpu3050: gyro sensor Both of these actual drivers are already upstream Signed-off-by: Jekyll Lai Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index fedc3d7..940a080 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -487,6 +487,46 @@ static void __init *max7315_platform_data(void *info) return max7315; } +static void *tca6416_platform_data(void *info) +{ + static struct pca953x_platform_data tca6416; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + strcpy(i2c_info->type, "tca6416"); + strcpy(base_pin_name, "tca6416_base"); + strcpy(intr_pin_name, "tca6416_int"); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + tca6416.gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + tca6416.irq_base = -1; + } + return &tca6416; +} + +static void *mpu3050_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("mpu3050_int"); + + if (intr == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + static void __init *emc1403_platform_data(void *info) { static short intr2nd_pdata; @@ -652,9 +692,11 @@ static const struct devs_id __initconst device_ids[] = { {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data}, {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data}, /* MSIC subdevices */ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data}, -- cgit v0.10.2 From efa221268566c2caa0e2a540068a2e8250fbb819 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 16 Nov 2011 18:32:34 +0000 Subject: x86, mrst: Change the pmic_gpio device type to IPC In latest firmware's SFI tables, pmic_gpio has been set to IPC type of device, so we need handle it too. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 940a080..ad4ec1c 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -689,6 +689,7 @@ static void *msic_ocd_platform_data(void *info) static const struct devs_id __initconst device_ids[] = { {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data}, {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, -- cgit v0.10.2 From 9e6866686bdf2dcf3aeb0838076237ede532dcc8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 25 Sep 2011 15:29:00 -0600 Subject: x86/mpparse: Account for bus types other than ISA and PCI In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494 Reported-bisected-and-tested-by: Dan McGrath Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # 2.6.26+ Cc: Dan McGrath Cc: Alexey Starikovskiy [jrnieder@gmail.com: clarified commit message] Signed-off-by: Jonathan Nieder Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9103b89..0741b062 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m) } #endif + set_bit(m->busid, mp_bus_not_pci); if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { - set_bit(m->busid, mp_bus_not_pci); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif -- cgit v0.10.2 From 644ddf588f5dba34df483a6ea8abe639cc102289 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 18 Oct 2011 13:24:10 -0400 Subject: Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup TAINT_FIRMWARE_WORKAROUND should be set when an MTRR fixup is done. Signed-off-by: Prarit Bhargava Acked-by: David Rientjes Link: http://lkml.kernel.org/r/1318958650-12447-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a71efcdb..e1fe7f4 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, if (tmp != mask_lo) { printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n"); + add_taint(TAINT_FIRMWARE_WORKAROUND); mask_lo = tmp; } } -- cgit v0.10.2 From bd399063976c6c7a09beb4730ed1d93cadbcc739 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 7 Nov 2011 18:05:32 +0530 Subject: x86, microcode: Fix the failure path of microcode update driver init code The microcode update driver's initialization code does not handle failures correctly. This patch fixes this issue. Signed-off-by: Jan Beulich Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20111107123530.12164.31227.stgit@srivatsabhat.in.ibm.com Link: http://lkml.kernel.org/r/4ED8E2270200007800065120@nat28.tlf.novell.com Signed-off-by: Borislav Petkov diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index f2d2a66..9d46f5e 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -256,7 +256,7 @@ static int __init microcode_dev_init(void) return 0; } -static void microcode_dev_exit(void) +static void __exit microcode_dev_exit(void) { misc_deregister(µcode_dev); } @@ -519,10 +519,8 @@ static int __init microcode_init(void) microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); + if (IS_ERR(microcode_pdev)) return PTR_ERR(microcode_pdev); - } get_online_cpus(); mutex_lock(µcode_mutex); @@ -532,14 +530,12 @@ static int __init microcode_init(void) mutex_unlock(µcode_mutex); put_online_cpus(); - if (error) { - platform_device_unregister(microcode_pdev); - return error; - } + if (error) + goto out_pdev; error = microcode_dev_init(); if (error) - return error; + goto out_sysdev_driver; register_syscore_ops(&mc_syscore_ops); register_hotcpu_notifier(&mc_cpu_notifier); @@ -548,6 +544,20 @@ static int __init microcode_init(void) " , Peter Oruba\n"); return 0; + +out_sysdev_driver: + get_online_cpus(); + mutex_lock(µcode_mutex); + + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + + mutex_unlock(µcode_mutex); + put_online_cpus(); + +out_pdev: + platform_device_unregister(microcode_pdev); + return error; + } module_init(microcode_init); -- cgit v0.10.2 From ce37defc0f6673f5ca2c92ed5cfcaf290ae7dd16 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 5 Dec 2011 14:28:37 +0100 Subject: x86: Document rdmsr_safe restrictions Recently, I got bitten by using rdmsr_safe too early in the boot process. Document its shortcomings for future reference. Link: http://lkml.kernel.org/r/4ED5B70F.606@lwfinger.net Signed-off-by: Borislav Petkov diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 084ef95..95203d4 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high) return native_write_msr_safe(msr, low, high); } -/* rdmsr with exception handling */ +/* + * rdmsr with exception handling. + * + * Please note that the exception handling works only after we've + * switched to the "smart" #GP handler in trap_init() which knows about + * exception tables - using this macro earlier than that causes machine + * hangs on boxes which do not implement the @msr in the first argument. + */ #define rdmsr_safe(msr, p1, p2) \ ({ \ int __err; \ -- cgit v0.10.2 From 8dbf4a30033ff61091015f0076e872b5c8f717cc Mon Sep 17 00:00:00 2001 From: Ajaykumar Hotchandani Date: Fri, 11 Nov 2011 18:31:57 +0530 Subject: x86/mtrr: Resolve inconsistency with Intel processor manual Following is from Notes of section 11.5.3 of Intel processor manual available at: http://www.intel.com/Assets/PDF/manual/325384.pdf For the Pentium 4 and Intel Xeon processors, after the sequence of steps given above has been executed, the cache lines containing the code between the end of the WBINVD instruction and before the MTRRS have actually been disabled may be retained in the cache hierarchy. Here, to remove code from the cache completely, a second WBINVD instruction must be executed after the MTRRs have been disabled. This patch provides resolution for that. Ideally, I will like to make changes only for Pentium 4 and Xeon processors. But, I am not finding easier way to do it. And, extra wbinvd() instruction does not hurt much for other processors. Signed-off-by: Ajaykumar Hotchandani Cc: Linus Torvalds Cc: Arjan van de Ven Cc: Lucas De Marchi Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index e1fe7f4..97b2635 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -694,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) /* Disable MTRRs, and set the default type to uncached */ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi); + wbinvd(); } static void post_set(void) __releases(set_atomicity_lock) -- cgit v0.10.2 From 1ef03890969932e9359b9a4c658f7f87771910ac Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Mon, 5 Dec 2011 16:53:53 +0300 Subject: x86: Fix "Acer Aspire 1" reboot hang MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: Uroš Vampl Tested-by: Vasily Khoruzhick Signed-off-by: Peter Chubb Cc: Don Zickus Cc: Peter Zijlstra Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 4463d2f..37a458b 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup); */ /* - * Some machines require the "reboot=b" commandline option, + * Some machines require the "reboot=b" or "reboot=k" commandline options, * this quirk makes that automatic. */ static int __init set_bios_reboot(const struct dmi_system_id *d) @@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } +static int __init set_kbd_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_KBD) { + reboot_type = BOOT_KBD; + printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident); + } + return 0; +} + static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, @@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { }, }, { /* Handle reboot issue on Acer Aspire one */ - .callback = set_bios_reboot, + .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), -- cgit v0.10.2 From 2cd1c8d4dc7ecca9e9431e2dabe41ae9c7d89e51 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 15 Nov 2011 14:49:09 -0800 Subject: x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [] ? __swap_duplicate+0xc2/0x160 [] ? pte_mfn_to_pfn+0x87/0xe0 [] ? swap_duplicate+0x14/0x40 [] ? copy_pte_range+0x45b/0x500 [] ? copy_page_range+0x195/0x200 [] ? dup_mmap+0x1c6/0x2c0 [] ? dup_mm+0xa8/0x130 [] ? copy_process+0x98a/0xb30 [] ? do_fork+0x4f/0x280 [] ? getnstimeofday+0x43/0x100 [] ? sys_clone+0x30/0x40 [] ? ptregs_clone+0x15/0x48 [] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Jeremy Fitzhardinge Cc: Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index b499626..f4f29b1 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot) vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); BUG_ON(!pte_none(*(kmap_pte-idx))); set_pte(kmap_pte-idx, mk_pte(page, prot)); + arch_flush_lazy_mmu_mode(); return (void *)vaddr; } @@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr) */ kpte_clear_flush(kmap_pte-idx, vaddr); kmap_atomic_idx_pop(); + arch_flush_lazy_mmu_mode(); } #ifdef CONFIG_DEBUG_HIGHMEM else { -- cgit v0.10.2 From a7a280493fb63f8e9fbfc8feec5810bf50e1e54f Mon Sep 17 00:00:00 2001 From: Major Lee Date: Tue, 15 Nov 2011 15:31:23 -0800 Subject: x86/mrst: Battery fixes When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: Major Lee Signed-off-by: Alan Cox Cc: Mathias Nyman Cc: Feng Tang Cc: "H. Peter Anvin" [fix build] Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index cffcb7c..01fa671 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -61,7 +61,8 @@ MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages."); #define PMIC_BATT_CHR_SBATDET_MASK (1 << 5) #define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6) #define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7) -#define PMIC_BATT_CHR_EXCPT_MASK 0xC6 +#define PMIC_BATT_CHR_EXCPT_MASK 0x86 + #define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31) #define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF @@ -304,11 +305,6 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT); batt_exception = 1; - } else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); - batt_exception = 1; } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) { pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT; pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; @@ -316,6 +312,10 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) batt_exception = 1; } else { pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; + if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { + /* PMIC will change charging current automatically */ + pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); + } } } -- cgit v0.10.2 From 35d476996288af6a4aaa8b172bcd31decd233de7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 15 Nov 2011 14:46:52 -0800 Subject: x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms Intel MID x86 platforms have a memory mapped virtual RTC instead. No MID platform have the default ports (and accessing them may do weird stuff). Signed-off-by: Mathias Nyman Signed-off-by: Alan Cox Cc: feng.tang@intel.com Cc: Feng Tang Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index e628312..93f7909 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -31,11 +31,20 @@ enum mrst_cpu_type { }; extern enum mrst_cpu_type __mrst_cpu_chip; + +#ifdef CONFIG_X86_INTEL_MID + static inline enum mrst_cpu_type mrst_identify_cpu(void) { return __mrst_cpu_chip; } +#else /* !CONFIG_X86_INTEL_MID */ + +#define mrst_identify_cpu() (0) + +#endif /* !CONFIG_X86_INTEL_MID */ + enum mrst_timer_options { MRST_TIMER_DEFAULT, MRST_TIMER_APBT_ONLY, diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 348ce01..af6db6e 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -12,6 +12,7 @@ #include #include #include +#include #ifdef CONFIG_X86_32 /* @@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void) if (of_have_populated_dt()) return 0; + /* Intel MID platforms don't have ioport rtc */ + if (mrst_identify_cpu()) + return -ENODEV; + platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); -- cgit v0.10.2 From 38f6ae1e1b0d5e8b0a95f88c1eee2c5e8b001631 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 2 Dec 2011 09:38:33 +1100 Subject: perf stat: Failure with "Operation not supported" perf stat is failing on PowerPC: Error: open_counter returned with 95 (Operation not supported). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. commit 370faf1dd046 (perf stat: Fail softly on unsupported events) added a check for failure returning ENOENT, but the POWER backend returns EOPNOTSUPP. It looks like alpha, blackfin and mips do the same. With the patch applied, things work as expected: Performance counter stats for '/bin/true': 0.362176 task-clock # 0.623 CPUs utilized 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 28 page-faults # 0.077 M/sec 1,677,020 cycles # 4.630 GHz stalled-cycles-frontend stalled-cycles-backend 431,220 instructions # 0.26 insns per cycle 101,889 branches # 281.325 M/sec 4,145 branch-misses # 4.07% of all branches 0.000581361 seconds time elapsed Cc: # 3.0+ Cc: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20111202093833.5fef7226@kryten Signed-off-by: Anton Blanchard Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 7d98676..955930e 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -463,7 +463,8 @@ static int run_perf_stat(int argc __used, const char **argv) list_for_each_entry(counter, &evsel_list->entries, node) { if (create_perf_stat_counter(counter, first) < 0) { - if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) { + if (errno == EINVAL || errno == ENOSYS || + errno == ENOENT || errno == EOPNOTSUPP) { if (verbose) ui__warning("%s event is not supported by the kernel.\n", event_name(counter)); -- cgit v0.10.2 From 8360ee2f74bda2b794bdf4e23ab19d8b4e93807f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 21 Nov 2011 12:10:19 +0100 Subject: x86, AMD: Correct align_va_addr documentation Commit dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h") introduced a kernel command line parameter called 'align_va_addr' which still refers to arguments used in an earlier version of the patch and which got changed without updating the documentation. Correct that omission. Signed-off-by: Borislav Petkov Cc: Frank Arnold Link: http://lkml.kernel.org/r/1321873819-29541-1-git-send-email-bp@amd64.org Signed-off-by: Ingo Molnar diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a0c5c5f..5e22c3f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -315,8 +315,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. CPU-intensive style benchmark, and it can vary highly in a microbenchmark depending on workload and compiler. - 1: only for 32-bit processes - 2: only for 64-bit processes + 32: only for 32-bit processes + 64: only for 64-bit processes on: enable for both 32- and 64-bit processes off: disable for both 32- and 64-bit processes -- cgit v0.10.2 From f62ef5f3e9cff065aa845e2b7f487e1810b8e57e Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 2 Dec 2011 08:21:43 +0100 Subject: x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: Andreas Herrmann Cc: Frank Arnold Cc: Borislav Petkov Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index b78643d..03920a1 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, quirk_amd_nb_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, + quirk_amd_nb_node); + #endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 172ba70..2aaee0c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -517,8 +517,12 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 #define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 -- cgit v0.10.2 From c8f369ab6003a2df3cdae30f9aba641a4a606034 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 18:45:39 +0300 Subject: intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and atsr_parse_dev() which are both marked as __init. Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Signed-off-by: Sergey Senozhatsky Cc: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish Signed-off-by: Ingo Molnar diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index c0c7820..a004c39 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3524,7 +3524,7 @@ found: return 0; } -int dmar_parse_rmrr_atsr_dev(void) +int __init dmar_parse_rmrr_atsr_dev(void) { struct dmar_rmrr_unit *rmrr, *rmrr_n; struct dmar_atsr_unit *atsr, *atsr_n; -- cgit v0.10.2 From 61ed26e388ac67da262bb1a95d0474e4cabd4b0d Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 19:15:07 +0300 Subject: intr_remapping: Fix section mismatch in ir_dev_scope_init() Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: Sergey Senozhatsky Cc: Suresh Siddha Cc: Youquan Song Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish Signed-off-by: Ingo Molnar diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c index 07c9f18..6777ca0 100644 --- a/drivers/iommu/intr_remapping.c +++ b/drivers/iommu/intr_remapping.c @@ -773,7 +773,7 @@ int __init parse_ioapics_under_ir(void) return ir_supported; } -int ir_dev_scope_init(void) +int __init ir_dev_scope_init(void) { if (!intr_remapping_enabled) return 0; -- cgit v0.10.2 From 6560ee07dc946e94f7cc2cd8e3b5a5f5ee7340c1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:02 +0100 Subject: ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 86b2dec..9ff90a7 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include /* for machine_is_* */ @@ -927,7 +929,9 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; /* System booting at unusable rate, force reprogramming of DPLL1 */ @@ -942,4 +946,5 @@ void __init omap1_clk_late_init(void) } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } -- cgit v0.10.2 From 11948b9335865dc0ba3a5ca2c9c255291a8d50fb Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 16 Nov 2011 17:37:45 -0600 Subject: toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 13ef8c3..dcdc1f4 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -121,6 +121,7 @@ struct toshiba_acpi_dev { int illumination_supported:1; int video_supported:1; int fan_supported:1; + int system_event_supported:1; struct mutex mutex; }; @@ -724,7 +725,7 @@ static int keys_proc_show(struct seq_file *m, void *v) u32 hci_result; u32 value; - if (!dev->key_event_valid) { + if (!dev->key_event_valid && dev->system_event_supported) { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); if (hci_result == HCI_SUCCESS) { dev->key_event_valid = 1; @@ -964,6 +965,8 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) /* enable event fifo */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); + if (hci_result == HCI_SUCCESS) + dev->system_event_supported = 1; props.type = BACKLIGHT_PLATFORM; props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; @@ -1032,12 +1035,15 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) { struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); u32 hci_result, value; + int retries = 3; - if (event != 0x80) + if (!dev->system_event_supported || event != 0x80) return; + do { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { + switch (hci_result) { + case HCI_SUCCESS: if (value == 0x100) continue; /* act on key press; ignore key release */ @@ -1049,14 +1055,19 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) pr_info("Unknown key %x\n", value); } - } else if (hci_result == HCI_NOT_SUPPORTED) { + break; + case HCI_NOT_SUPPORTED: /* This is a workaround for an unresolved issue on * some machines where system events sporadically * become disabled. */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); pr_notice("Re-enabled hotkeys\n"); + /* fall through */ + default: + retries--; + break; } - } while (hci_result != HCI_EMPTY); + } while (retries && hci_result != HCI_EMPTY); } -- cgit v0.10.2 From de398fb8b92eba3447298053a483727bdd5fe37e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 5 Dec 2011 13:21:42 -0500 Subject: ipv4: Fix peer validation on cached lookup. If ipv4_valdiate_peer() fails during a cached entry lookup, we'll NULL derer since the loop iterator assumes rth is not NULL. Letting this be handled as a failure is just bogus, so just make it not fail. If we have trouble getting a non-NULL neighbour for the redirected gateway, just restore the original gateway and continue. The very next use of this cached route will try again. Reported-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 588d971..46af623 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1310,7 +1310,7 @@ static void rt_del(unsigned hash, struct rtable *rt) spin_unlock_bh(rt_hash_lock_addr(hash)); } -static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) +static void check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) { struct rtable *rt = (struct rtable *) dst; __be32 orig_gw = rt->rt_gateway; @@ -1321,21 +1321,19 @@ static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) rt->rt_gateway = peer->redirect_learned.a4; n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); - if (IS_ERR(n)) - return PTR_ERR(n); + if (IS_ERR(n)) { + rt->rt_gateway = orig_gw; + return; + } old_n = xchg(&rt->dst._neighbour, n); if (old_n) neigh_release(old_n); - if (!n || !(n->nud_state & NUD_VALID)) { - if (n) - neigh_event_send(n, NULL); - rt->rt_gateway = orig_gw; - return -EAGAIN; + if (!(n->nud_state & NUD_VALID)) { + neigh_event_send(n, NULL); } else { rt->rt_flags |= RTCF_REDIRECTED; call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); } - return 0; } /* called in rcu_read_lock() section */ @@ -1693,7 +1691,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } -static struct rtable *ipv4_validate_peer(struct rtable *rt) +static void ipv4_validate_peer(struct rtable *rt) { if (rt->rt_peer_genid != rt_peer_genid()) { struct inet_peer *peer; @@ -1708,15 +1706,12 @@ static struct rtable *ipv4_validate_peer(struct rtable *rt) if (peer->redirect_genid != redirect_genid) peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && - peer->redirect_learned.a4 != rt->rt_gateway) { - if (check_peer_redir(&rt->dst, peer)) - return NULL; - } + peer->redirect_learned.a4 != rt->rt_gateway) + check_peer_redir(&rt->dst, peer); } rt->rt_peer_genid = rt_peer_genid(); } - return rt; } static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) @@ -1725,7 +1720,7 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) if (rt_is_expired(rt)) return NULL; - dst = (struct dst_entry *) ipv4_validate_peer(rt); + ipv4_validate_peer(rt); return dst; } @@ -2380,9 +2375,7 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { - rth = ipv4_validate_peer(rth); - if (!rth) - continue; + ipv4_validate_peer(rth); if (noref) { dst_use_noref(&rth->dst, jiffies); skb_dst_set_noref(skb, &rth->dst); @@ -2758,9 +2751,7 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4) (IPTOS_RT_MASK | RTO_ONLINK)) && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { - rth = ipv4_validate_peer(rth); - if (!rth) - continue; + ipv4_validate_peer(rth); dst_use(&rth->dst, jiffies); RT_CACHE_STAT_INC(out_hit); rcu_read_unlock_bh(); -- cgit v0.10.2 From 145294c359a690b35c62d27dcff28fe892d02aca Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 18:27:25 +0000 Subject: ASoC: Remove references to corgi and spitz from machine driver document They're not currently actively worked on, the hardware being rather obsolete by now. Signed-off-by: Mark Brown diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index 3e2ec9c..d50c14d 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -50,8 +50,7 @@ Machine DAI Configuration The machine DAI configuration glues all the codec and CPU DAIs together. It can also be used to set up the DAI system clock and for any machine related DAI initialisation e.g. the machine audio map can be connected to the codec audio -map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c -for examples. +map, unconnected codec pins can be set as such. struct snd_soc_dai_link is used to set up each DAI in your machine. e.g. @@ -83,8 +82,7 @@ Machine Power Map The machine driver can optionally extend the codec power map and to become an audio power map of the audio subsystem. This allows for automatic power up/down of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack -sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for -details. +sockets in the machine init function. Machine Controls -- cgit v0.10.2 From 8c9b04346c0ae302d8b7b7df16cc19ddff77742e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 5 Dec 2011 14:47:48 +0100 Subject: gpio: fix a build failure on KS8695 GPIO I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely Reported-by: Mike Frysinger Signed-off-by: Linus Walleij Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index dbcb0bc..4e018d6 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o -obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o +obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o -- cgit v0.10.2 From 811fd3010cf512f2e23e6c4c912aad54516dc706 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sun, 4 Dec 2011 20:30:45 +0000 Subject: r8169: Rx FIFO overflow fixes. Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 6f06aa1..7a1e3a6 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1183,11 +1183,13 @@ static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) return value; } -static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) +static void rtl8169_irq_mask_and_ack(struct rtl8169_private *tp) { - RTL_W16(IntrMask, 0x0000); + void __iomem *ioaddr = tp->mmio_addr; - RTL_W16(IntrStatus, 0xffff); + RTL_W16(IntrMask, 0x0000); + RTL_W16(IntrStatus, tp->intr_event); + RTL_R8(ChipCmd); } static unsigned int rtl8169_tbi_reset_pending(struct rtl8169_private *tp) @@ -4339,7 +4341,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) void __iomem *ioaddr = tp->mmio_addr; /* Disable interrupts */ - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); rtl_rx_close(tp); @@ -4885,8 +4887,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(IntrMitigate, 0x5151); /* Work around for RxFIFO overflow. */ - if (tp->mac_version == RTL_GIGA_MAC_VER_11 || - tp->mac_version == RTL_GIGA_MAC_VER_22) { + if (tp->mac_version == RTL_GIGA_MAC_VER_11) { tp->intr_event |= RxFIFOOver | PCSTimeout; tp->intr_event &= ~RxOverflow; } @@ -5076,6 +5077,11 @@ static void rtl_hw_start_8101(struct net_device *dev) void __iomem *ioaddr = tp->mmio_addr; struct pci_dev *pdev = tp->pci_dev; + if (tp->mac_version >= RTL_GIGA_MAC_VER_30) { + tp->intr_event &= ~RxFIFOOver; + tp->napi_event &= ~RxFIFOOver; + } + if (tp->mac_version == RTL_GIGA_MAC_VER_13 || tp->mac_version == RTL_GIGA_MAC_VER_16) { int cap = pci_pcie_cap(pdev); @@ -5342,7 +5348,7 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev) /* Wait for any pending NAPI task to complete */ napi_disable(&tp->napi); - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); tp->intr_mask = 0xffff; RTL_W16(IntrMask, tp->intr_event); @@ -5804,6 +5810,10 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) */ status = RTL_R16(IntrStatus); while (status && status != 0xffff) { + status &= tp->intr_event; + if (!status) + break; + handled = 1; /* Handle all of the error cases first. These will reset @@ -5818,27 +5828,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) switch (tp->mac_version) { /* Work around for rx fifo overflow */ case RTL_GIGA_MAC_VER_11: - case RTL_GIGA_MAC_VER_22: - case RTL_GIGA_MAC_VER_26: netif_stop_queue(dev); rtl8169_tx_timeout(dev); goto done; - /* Testers needed. */ - case RTL_GIGA_MAC_VER_17: - case RTL_GIGA_MAC_VER_19: - case RTL_GIGA_MAC_VER_20: - case RTL_GIGA_MAC_VER_21: - case RTL_GIGA_MAC_VER_23: - case RTL_GIGA_MAC_VER_24: - case RTL_GIGA_MAC_VER_27: - case RTL_GIGA_MAC_VER_28: - case RTL_GIGA_MAC_VER_31: - /* Experimental science. Pktgen proof. */ - case RTL_GIGA_MAC_VER_12: - case RTL_GIGA_MAC_VER_25: - if (status == RxFIFOOver) - goto done; - break; default: break; } -- cgit v0.10.2 From c7c2c39be8ed4e503e987151f4599455060e219a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sun, 4 Dec 2011 20:30:52 +0000 Subject: r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a1e3a6..67bf078 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3935,8 +3935,6 @@ static void rtl_hw_reset(struct rtl8169_private *tp) break; udelay(100); } - - rtl8169_init_ring_indexes(tp); } static int __devinit @@ -5395,14 +5393,16 @@ static void rtl8169_reset_task(struct work_struct *work) if (!netif_running(dev)) goto out_unlock; + rtl8169_hw_reset(tp); + rtl8169_wait_for_quiescence(dev); for (i = 0; i < NUM_RX_DESC; i++) rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz); rtl8169_tx_clear(tp); + rtl8169_init_ring_indexes(tp); - rtl8169_hw_reset(tp); rtl_hw_start(dev); netif_wake_queue(dev); rtl8169_check_link_status(dev, tp, tp->mmio_addr); @@ -5413,11 +5413,6 @@ out_unlock: static void rtl8169_tx_timeout(struct net_device *dev) { - struct rtl8169_private *tp = netdev_priv(dev); - - rtl8169_hw_reset(tp); - - /* Let's wait a bit while any (async) irq lands on */ rtl8169_schedule_work(dev, rtl8169_reset_task); } -- cgit v0.10.2 From 6b84bd167458545f0806d5a1a8a102004365d44e Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Mon, 5 Dec 2011 06:57:44 +0000 Subject: netback: Fix alert message. The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu Acked-by: Ian Campbell Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 1ae270e..15e332d 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1668,7 +1668,7 @@ static int __init netback_init(void) "netback/%u", group); if (IS_ERR(netbk->task)) { - printk(KERN_ALERT "kthread_run() fails at netback\n"); + printk(KERN_ALERT "kthread_create() fails at netback\n"); del_timer(&netbk->net_timer); rc = PTR_ERR(netbk->task); goto failed_init; -- cgit v0.10.2 From 65e9d805e96c7e6a15c1e3b0c00a842d2249bab8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 5 Dec 2011 19:44:22 +0000 Subject: pasemi_mac: Fix building as module Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile index 05db543..90497ff 100644 --- a/drivers/net/ethernet/pasemi/Makefile +++ b/drivers/net/ethernet/pasemi/Makefile @@ -2,4 +2,5 @@ # Makefile for the A Semi network device drivers. # -obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o +obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o +pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o -- cgit v0.10.2 From 03e98c9eb916f3f0868c1dc344dde2a60287ff72 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 02:36:16 -0700 Subject: target: Address legacy PYX_TRANSPORT_* return code breakage This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 0fd96c1..4d81e10 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1017,11 +1017,6 @@ done: " non-existent or non-exported iSCSI LUN:" " 0x%016Lx\n", get_unaligned_le64(&hdr->lun)); } - if (ret == PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES) - return iscsit_add_reject_from_cmd( - ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); - send_check_condition = 1; goto attach_cmd; } @@ -1123,7 +1118,7 @@ attach_cmd: * the backend memory allocation. */ ret = transport_generic_new_cmd(&cmd->se_cmd); - if ((ret < 0) || (cmd->se_cmd.se_cmd_flags & SCF_SE_CMD_FAILED)) { + if (ret < 0) { immed_ret = IMMEDIATE_DATA_NORMAL_OPERATION; dump_immediate_data = 1; goto after_immediate_data; @@ -1341,7 +1336,7 @@ static int iscsit_handle_data_out(struct iscsi_conn *conn, unsigned char *buf) spin_lock_irqsave(&se_cmd->t_state_lock, flags); if (!(se_cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) || - (se_cmd->se_cmd_flags & SCF_SE_CMD_FAILED)) + (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION)) dump_unsolicited_data = 1; spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index c4c68da..101b1be 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -938,8 +938,7 @@ int iscsit_execute_cmd(struct iscsi_cmd *cmd, int ooo) * handle the SCF_SCSI_RESERVATION_CONFLICT case here as well. */ if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) { - if (se_cmd->se_cmd_flags & - SCF_SCSI_RESERVATION_CONFLICT) { + if (se_cmd->scsi_sense_reason == TCM_RESERVATION_CONFLICT) { cmd->i_state = ISTATE_SEND_STATUS; spin_unlock_bh(&cmd->istate_lock); iscsit_add_cmd_to_response_queue(cmd, cmd->conn, diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 3df1c9b..cbf5e45 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -148,22 +148,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * Allocate the necessary tasks to complete the received CDB+data */ ret = transport_generic_allocate_tasks(se_cmd, sc->cmnd); - if (ret == -ENOMEM) { - /* Out of Resources */ - return PYX_TRANSPORT_LU_COMM_FAILURE; - } else if (ret == -EINVAL) { - /* - * Handle case for SAM_STAT_RESERVATION_CONFLICT - */ - if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT) - return PYX_TRANSPORT_RESERVATION_CONFLICT; - /* - * Otherwise, return SAM_STAT_CHECK_CONDITION and return - * sense data. - */ - return PYX_TRANSPORT_USE_SENSE_REASON; - } - + if (ret != 0) + return ret; /* * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. @@ -194,12 +180,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) } /* Tell the core about our preallocated memory */ - ret = transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), + return transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), scsi_sg_count(sc), sgl_bidi, sgl_bidi_count); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; - - return 0; } /* diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 88f2ad4..cd61331 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -191,9 +191,10 @@ int target_emulate_set_target_port_groups(struct se_task *task) int alua_access_state, primary = 0, rc; u16 tg_pt_id, rtpi; - if (!l_port) - return PYX_TRANSPORT_LU_COMM_FAILURE; - + if (!l_port) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } buf = transport_kmap_first_data_page(cmd); /* @@ -203,7 +204,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) l_tg_pt_gp_mem = l_port->sep_alua_tg_pt_gp_mem; if (!l_tg_pt_gp_mem) { pr_err("Unable to access l_port->sep_alua_tg_pt_gp_mem\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } spin_lock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); @@ -211,7 +213,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!l_tg_pt_gp) { spin_unlock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); pr_err("Unable to access *l_tg_pt_gp_mem->tg_pt_gp\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } rc = (l_tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA); @@ -220,7 +223,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!rc) { pr_debug("Unable to process SET_TARGET_PORT_GROUPS" " while TPGS_EXPLICT_ALUA is disabled\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } @@ -245,7 +249,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * REQUEST, and the additional sense code set to INVALID * FIELD IN PARAMETER LIST. */ - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } rc = -1; @@ -298,7 +303,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * throw an exception with ASCQ: INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } else { @@ -335,7 +341,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 683ba02..8013a5a 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -703,6 +703,7 @@ int target_emulate_inquiry(struct se_task *task) if (cmd->data_length < 4) { pr_err("SCSI Inquiry payload length: %u" " too small for EVPD=1\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } @@ -719,6 +720,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; ret = -EINVAL; out_unmap: @@ -969,7 +971,8 @@ int target_emulate_modesense(struct se_task *task) default: pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", cdb[2] & 0x3f, cdb[3]); - return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; + cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; + return -EINVAL; } offset += length; @@ -1027,7 +1030,8 @@ int target_emulate_request_sense(struct se_task *task) if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" " supported\n"); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -ENOSYS; } buf = transport_kmap_first_data_page(cmd); @@ -1100,7 +1104,8 @@ int target_emulate_unmap(struct se_task *task) if (!dev->transport->do_discard) { pr_err("UNMAP emulation not supported for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } /* First UNMAP block descriptor starts at 8 byte offset */ @@ -1157,7 +1162,8 @@ int target_emulate_write_same(struct se_task *task) if (!dev->transport->do_discard) { pr_err("WRITE_SAME emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } if (cmd->t_task_cdb[0] == WRITE_SAME) @@ -1193,11 +1199,13 @@ int target_emulate_write_same(struct se_task *task) int target_emulate_synchronize_cache(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; + struct se_cmd *cmd = task->task_se_cmd; if (!dev->transport->do_sync_cache) { pr_err("SYNCHRONIZE_CACHE emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } dev->transport->do_sync_cache(task); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index ba5edec..0795328 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -708,7 +708,7 @@ done: se_task->task_scsi_status = GOOD; transport_complete_task(se_task, 1); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* se_release_device_for_hba(): diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 67cd6fe..cdd47e8 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -449,13 +449,15 @@ static int fd_do_task(struct se_task *task) } - if (ret < 0) + if (ret < 0) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return ret; + } if (ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); } - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* fd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 7698efe..c670b8c 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -554,12 +554,15 @@ static int iblock_do_task(struct se_task *task) else { pr_err("Unsupported SCSI -> BLOCK LBA conversion:" " %u\n", dev->se_sub_dev->se_dev_attrib.block_size); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOSYS; } bio = iblock_get_bio(task, block_lba, sg_num); - if (!bio) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + if (!bio) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; + } bio_list_init(&list); bio_list_add(&list, bio); @@ -588,12 +591,13 @@ static int iblock_do_task(struct se_task *task) submit_bio(rw, bio); blk_finish_plug(&plug); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while ((bio = bio_list_pop(&list))) bio_put(bio); - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static u32 iblock_get_device_rev(struct se_device *dev) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 5a4ebfc..95dee70 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -191,7 +191,7 @@ static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret) pr_err("Received legacy SPC-2 RESERVE/RELEASE" " while active SPC-3 registrations exist," " returning RESERVATION_CONFLICT\n"); - *ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; return true; } @@ -252,7 +252,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) (cmd->t_task_cdb[1] & 0x02)) { pr_err("LongIO and Obselete Bits set, returning" " ILLEGAL_REQUEST\n"); - ret = PYX_TRANSPORT_ILLEGAL_REQUEST; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + ret = -EINVAL; goto out; } /* @@ -277,7 +278,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) " from %s \n", cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out_unlock; } @@ -1510,7 +1512,8 @@ static int core_scsi3_decode_spec_i_port( tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); if (!tidh_new) { pr_err("Unable to allocate tidh_new\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } INIT_LIST_HEAD(&tidh_new->dest_list); tidh_new->dest_tpg = tpg; @@ -1522,7 +1525,8 @@ static int core_scsi3_decode_spec_i_port( sa_res_key, all_tg_pt, aptpl); if (!local_pr_reg) { kfree(tidh_new); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } tidh_new->dest_pr_reg = local_pr_reg; /* @@ -1548,7 +1552,8 @@ static int core_scsi3_decode_spec_i_port( pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header" " does not equal CDB data_length: %u\n", tpdl, cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1598,7 +1603,9 @@ static int core_scsi3_decode_spec_i_port( " for tmp_tpg\n"); atomic_dec(&tmp_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } /* @@ -1628,7 +1635,9 @@ static int core_scsi3_decode_spec_i_port( atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_tpg_undepend_item(tmp_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } @@ -1646,7 +1655,8 @@ static int core_scsi3_decode_spec_i_port( if (!dest_tpg) { pr_err("SPC-3 PR SPEC_I_PT: Unable to locate" " dest_tpg\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -1660,7 +1670,8 @@ static int core_scsi3_decode_spec_i_port( " %u for Transport ID: %s\n", tid_len, ptr); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1678,7 +1689,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -1690,7 +1702,9 @@ static int core_scsi3_decode_spec_i_port( smp_mb__after_atomic_dec(); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -1727,7 +1741,9 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -ENOMEM; goto out; } INIT_LIST_HEAD(&tidh_new->dest_list); @@ -1759,7 +1775,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); kfree(tidh_new); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } tidh_new->dest_pr_reg = dest_pr_reg; @@ -2098,7 +2115,8 @@ static int core_scsi3_emulate_pro_register( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2117,13 +2135,14 @@ static int core_scsi3_emulate_pro_register( if (res_key) { pr_warn("SPC-3 PR: Reservation Key non-zero" " for SA REGISTER, returning CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * Do nothing but return GOOD status. */ if (!sa_res_key) - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; if (!spec_i_pt) { /* @@ -2138,7 +2157,8 @@ static int core_scsi3_emulate_pro_register( if (ret != 0) { pr_err("Unable to allocate" " struct t10_pr_registration\n"); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } } else { /* @@ -2197,14 +2217,16 @@ static int core_scsi3_emulate_pro_register( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } } if (spec_i_pt) { pr_err("SPC-3 PR UNREGISTER: SPEC_I_PT" " set while sa_res_key=0\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * An existing ALL_TG_PT=1 registration being released @@ -2215,7 +2237,8 @@ static int core_scsi3_emulate_pro_register( " registration exists, but ALL_TG_PT=1 bit not" " present in received PROUT\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } /* * Allocate APTPL metadata buffer used for UNREGISTER ops @@ -2227,7 +2250,9 @@ static int core_scsi3_emulate_pro_register( pr_err("Unable to allocate" " pr_aptpl_buf\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } } /* @@ -2241,7 +2266,8 @@ static int core_scsi3_emulate_pro_register( if (pr_holder < 0) { kfree(pr_aptpl_buf); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } spin_lock(&pr_tmpl->registration_lock); @@ -2405,7 +2431,8 @@ static int core_scsi3_pro_reserve( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2417,7 +2444,8 @@ static int core_scsi3_pro_reserve( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RESERVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2433,7 +2461,8 @@ static int core_scsi3_pro_reserve( " does not match existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2448,7 +2477,8 @@ static int core_scsi3_pro_reserve( if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * See if we have an existing PR reservation holder pointer at @@ -2480,7 +2510,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2503,7 +2534,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2517,7 +2549,7 @@ static int core_scsi3_pro_reserve( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * Otherwise, our *pr_reg becomes the PR reservation holder for said @@ -2574,7 +2606,8 @@ static int core_scsi3_emulate_pro_reserve( default: pr_err("SPC-3 PR: Unknown Service Action RESERVE Type:" " 0x%02x\n", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -2630,7 +2663,8 @@ static int core_scsi3_emulate_pro_release( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * Locate the existing *pr_reg via struct se_node_acl pointers @@ -2639,7 +2673,8 @@ static int core_scsi3_emulate_pro_release( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RELEASE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2661,7 +2696,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) @@ -2675,7 +2710,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2697,7 +2732,8 @@ static int core_scsi3_emulate_pro_release( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing and above: @@ -2719,7 +2755,8 @@ static int core_scsi3_emulate_pro_release( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * In response to a persistent reservation release request from the @@ -2802,7 +2839,8 @@ static int core_scsi3_emulate_pro_clear( if (!pr_reg_n) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for CLEAR\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 section 5.7.11.6, Clearing: @@ -2821,7 +2859,8 @@ static int core_scsi3_emulate_pro_clear( " existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * a) Release the persistent reservation, if any; @@ -2979,8 +3018,10 @@ static int core_scsi3_pro_preempt( int all_reg = 0, calling_it_nexus = 0, released_regs = 0; int prh_type = 0, prh_scope = 0, ret; - if (!se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; pr_reg_n = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, @@ -2989,16 +3030,19 @@ static int core_scsi3_pro_preempt( pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for PREEMPT%s\n", (abort) ? "_AND_ABORT" : ""); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (pr_reg_n->pr_res_key != res_key) { core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } INIT_LIST_HEAD(&preempt_and_abort_list); @@ -3012,7 +3056,8 @@ static int core_scsi3_pro_preempt( if (!all_reg && !sa_res_key) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * From spc4r17, section 5.7.11.4.4 Removing Registrations: @@ -3106,7 +3151,8 @@ static int core_scsi3_pro_preempt( if (!released_regs) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * For an existing all registrants type reservation @@ -3297,7 +3343,8 @@ static int core_scsi3_emulate_pro_preempt( default: pr_err("SPC-3 PR: Unknown Service Action PREEMPT%s" " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -3331,7 +3378,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } memset(dest_iport, 0, 64); memset(i_buf, 0, PR_REG_ISID_ID_LEN); @@ -3349,7 +3397,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate PR_REGISTERED" " *pr_reg for REGISTER_AND_MOVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * The provided reservation key much match the existing reservation key @@ -3360,7 +3409,8 @@ static int core_scsi3_emulate_pro_register_and_move( " res_key: 0x%016Lx does not match existing SA REGISTER" " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * The service active reservation key needs to be non zero @@ -3369,7 +3419,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received zero" " sa_res_key\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* @@ -3392,7 +3443,8 @@ static int core_scsi3_emulate_pro_register_and_move( " does not equal CDB data_length: %u\n", tid_len, cmd->data_length); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3417,7 +3469,8 @@ static int core_scsi3_emulate_pro_register_and_move( atomic_dec(&dest_se_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3430,7 +3483,8 @@ static int core_scsi3_emulate_pro_register_and_move( " fabric ops from Relative Target Port Identifier:" " %hu\n", rtpi); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3445,14 +3499,16 @@ static int core_scsi3_emulate_pro_register_and_move( " from fabric: %s\n", proto_ident, dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), dest_tf_ops->get_fabric_name()); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Fabric does not" " containg a valid tpg_parse_pr_out_transport_id" " function pointer\n"); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, @@ -3460,7 +3516,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!initiator_str) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate" " initiator_str from Transport ID\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3489,7 +3546,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" " matches: %s on received I_T Nexus\n", initiator_str, pr_reg_nacl->initiatorname); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (!strcmp(iport_ptr, pr_reg->pr_reg_isid)) { @@ -3497,7 +3555,8 @@ static int core_scsi3_emulate_pro_register_and_move( " matches: %s %s on received I_T Nexus\n", initiator_str, iport_ptr, pr_reg_nacl->initiatorname, pr_reg->pr_reg_isid); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } after_iport_check: @@ -3517,7 +3576,8 @@ after_iport_check: pr_err("Unable to locate %s dest_node_acl for" " TransportID%s\n", dest_tf_ops->get_fabric_name(), initiator_str); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } ret = core_scsi3_nodeacl_depend_item(dest_node_acl); @@ -3527,7 +3587,8 @@ after_iport_check: atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); dest_node_acl = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -3543,7 +3604,8 @@ after_iport_check: if (!dest_se_deve) { pr_err("Unable to locate %s dest_se_deve from RTPI:" " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3553,7 +3615,8 @@ after_iport_check: atomic_dec(&dest_se_deve->pr_ref_count); smp_mb__after_atomic_dec(); dest_se_deve = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -3572,7 +3635,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: No reservation" " currently held\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; goto out; } /* @@ -3585,7 +3649,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: Calling I_T" " Nexus is not reservation holder\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } /* @@ -3603,7 +3668,8 @@ after_iport_check: " reservation for type: %s\n", core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } pr_res_nacl = pr_res_holder->pr_reg_nacl; @@ -3640,7 +3706,8 @@ after_iport_check: sa_res_key, 0, aptpl, 2, 1); if (ret != 0) { spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, @@ -3771,7 +3838,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = EINVAL; goto out; } @@ -3779,13 +3847,16 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * FIXME: A NULL struct se_session pointer means an this is not coming from * a $FABRIC_MOD's nexus, but from internal passthrough ops. */ - if (!cmd->se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!cmd->se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } if (cmd->data_length < 24) { pr_warn("SPC-PR: Received PR OUT parameter list" " length too small: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3820,7 +3891,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * SPEC_I_PT=1 is only valid for Service action: REGISTER */ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) { - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3837,7 +3909,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) (cmd->data_length != 24)) { pr_warn("SPC-PR: Received PR OUT illegal parameter" " list length: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3878,7 +3951,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_OUT service" " action: 0x%02x\n", cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } @@ -3906,7 +3980,8 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_KEYS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3965,7 +4040,8 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4047,7 +4123,8 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) if (cmd->data_length < 6) { pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:" " %u too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4108,7 +4185,8 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4255,7 +4333,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } switch (cmd->t_task_cdb[1] & 0x1f) { @@ -4274,7 +4353,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_IN service" " action: 0x%02x\n", cmd->t_task_cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index ed32e1e..8b15e56 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -963,6 +963,7 @@ static inline struct bio *pscsi_get_bio(int sg_num) static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, struct bio **hbio) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; u32 task_sg_num = task->task_sg_nents; struct bio *bio = NULL, *tbio = NULL; @@ -971,7 +972,7 @@ static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, u32 data_len = task->task_size, i, len, bytes, off; int nr_pages = (task->task_size + task_sg[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; - int nr_vecs = 0, rc, ret = PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + int nr_vecs = 0, rc; int rw = (task->task_data_direction == DMA_TO_DEVICE); *hbio = NULL; @@ -1058,11 +1059,13 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return ret; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static int pscsi_do_task(struct se_task *task) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; struct pscsi_plugin_task *pt = PSCSI_TASK(task); struct request *req; @@ -1078,7 +1081,9 @@ static int pscsi_do_task(struct se_task *task) if (!req || IS_ERR(req)) { pr_err("PSCSI: blk_get_request() failed: %ld\n", req ? IS_ERR(req) : -ENOMEM); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENODEV; } } else { BUG_ON(!task->task_size); @@ -1087,8 +1092,11 @@ static int pscsi_do_task(struct se_task *task) * Setup the main struct request for the task->task_sg[] payload */ ret = pscsi_map_sg(task, task->task_sg, &hbio); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (ret < 0) { + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return ret; + } req = blk_make_request(pdv->pdv_sd->request_queue, hbio, GFP_KERNEL); @@ -1115,7 +1123,7 @@ static int pscsi_do_task(struct se_task *task) (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while (hbio) { @@ -1124,7 +1132,8 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } /* pscsi_get_sense_buffer(): @@ -1198,9 +1207,8 @@ static inline void pscsi_process_SAM_status( " 0x%02x Result: 0x%08x\n", task, pt->pscsi_cdb[0], pt->pscsi_result); task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + task->task_se_cmd->scsi_sense_reason = + TCM_UNSUPPORTED_SCSI_OPCODE; transport_complete_task(task, 0); break; } diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 5158d384..6d8a688 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -603,8 +603,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) task->task_scsi_status = GOOD; transport_complete_task(task, 1); - - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* rd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 217e29d..6845228 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -345,10 +345,6 @@ static void core_tmr_drain_cmd_list( " %d t_fe_count: %d\n", (preempt_and_abort_list) ? "Preempt" : "", cmd, cmd->t_state, atomic_read(&cmd->t_fe_count)); - /* - * Signal that the command has failed via cmd->se_cmd_flags, - */ - transport_new_cmd_failure(cmd); core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, atomic_read(&cmd->t_fe_count)); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3400ae6..a997fde 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -82,7 +82,7 @@ static int transport_generic_get_mem(struct se_cmd *cmd); static void transport_put_cmd(struct se_cmd *cmd); static void transport_remove_cmd_from_queue(struct se_cmd *cmd); static int transport_set_sense_codes(struct se_cmd *cmd, u8 asc, u8 ascq); -static void transport_generic_request_failure(struct se_cmd *, int, int); +static void transport_generic_request_failure(struct se_cmd *); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -680,9 +680,9 @@ void transport_complete_sync_cache(struct se_cmd *cmd, int good) task->task_scsi_status = GOOD; } else { task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_ILLEGAL_REQUEST; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_ILLEGAL_REQUEST; + task->task_se_cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + } transport_complete_task(task, good); @@ -693,7 +693,7 @@ static void target_complete_failure_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - transport_generic_request_failure(cmd, 1, 1); + transport_generic_request_failure(cmd); } /* transport_complete_task(): @@ -755,10 +755,11 @@ void transport_complete_task(struct se_task *task, int success) if (cmd->t_tasks_failed) { if (!task->task_error_status) { task->task_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } + INIT_WORK(&cmd->work, target_complete_failure_work); } else { atomic_set(&cmd->t_transport_complete, 1); @@ -1573,6 +1574,8 @@ int transport_generic_allocate_tasks( pr_err("Received SCSI CDB with command_size: %d that" " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", scsi_command_size(cdb), SCSI_MAX_VARLEN_CDB_SIZE); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } /* @@ -1588,6 +1591,9 @@ int transport_generic_allocate_tasks( " %u > sizeof(cmd->__t_task_cdb): %lu ops\n", scsi_command_size(cdb), (unsigned long)sizeof(cmd->__t_task_cdb)); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -ENOMEM; } } else @@ -1658,11 +1664,9 @@ int transport_handle_cdb_direct( * and call transport_generic_request_failure() if necessary.. */ ret = transport_generic_new_cmd(cmd); - if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, 0, - (cmd->data_direction != DMA_TO_DEVICE)); - } + if (ret < 0) + transport_generic_request_failure(cmd); + return 0; } EXPORT_SYMBOL(transport_handle_cdb_direct); @@ -1798,20 +1802,16 @@ static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) /* * Handle SAM-esque emulation for generic transport request failures. */ -static void transport_generic_request_failure( - struct se_cmd *cmd, - int complete, - int sc) +static void transport_generic_request_failure(struct se_cmd *cmd) { int ret = 0; pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08x" " CDB: 0x%02x\n", cmd, cmd->se_tfo->get_task_tag(cmd), cmd->t_task_cdb[0]); - pr_debug("-----[ i_state: %d t_state: %d transport_error_status: %d\n", + pr_debug("-----[ i_state: %d t_state: %d scsi_sense_reason: %d\n", cmd->se_tfo->get_cmd_state(cmd), - cmd->t_state, - cmd->transport_error_status); + cmd->t_state, cmd->scsi_sense_reason); pr_debug("-----[ t_tasks: %d t_task_cdbs_left: %d" " t_task_cdbs_sent: %d t_task_cdbs_ex_left: %d --" " t_transport_active: %d t_transport_stop: %d" @@ -1829,46 +1829,19 @@ static void transport_generic_request_failure( if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) transport_complete_task_attr(cmd); - if (complete) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - } - - switch (cmd->transport_error_status) { - case PYX_TRANSPORT_UNKNOWN_SAM_OPCODE: - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; - break; - case PYX_TRANSPORT_REQ_TOO_MANY_SECTORS: - cmd->scsi_sense_reason = TCM_SECTOR_COUNT_TOO_MANY; - break; - case PYX_TRANSPORT_INVALID_CDB_FIELD: - cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; - break; - case PYX_TRANSPORT_INVALID_PARAMETER_LIST: - cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; - break; - case PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES: - if (!sc) - transport_new_cmd_failure(cmd); - /* - * Currently for PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES, - * we force this session to fall back to session - * recovery. - */ - cmd->se_tfo->fall_back_to_erl0(cmd->se_sess); - cmd->se_tfo->stop_session(cmd->se_sess, 0, 0); - - goto check_stop; - case PYX_TRANSPORT_LU_COMM_FAILURE: - case PYX_TRANSPORT_ILLEGAL_REQUEST: - cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - break; - case PYX_TRANSPORT_UNKNOWN_MODE_PAGE: - cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; - break; - case PYX_TRANSPORT_WRITE_PROTECTED: - cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; + switch (cmd->scsi_sense_reason) { + case TCM_NON_EXISTENT_LUN: + case TCM_UNSUPPORTED_SCSI_OPCODE: + case TCM_INVALID_CDB_FIELD: + case TCM_INVALID_PARAMETER_LIST: + case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE: + case TCM_UNKNOWN_MODE_PAGE: + case TCM_WRITE_PROTECTED: + case TCM_CHECK_CONDITION_ABORT_CMD: + case TCM_CHECK_CONDITION_UNIT_ATTENTION: + case TCM_CHECK_CONDITION_NOT_READY: break; - case PYX_TRANSPORT_RESERVATION_CONFLICT: + case TCM_RESERVATION_CONFLICT: /* * No SENSE Data payload for this case, set SCSI Status * and queue the response to $FABRIC_MOD. @@ -1893,15 +1866,9 @@ static void transport_generic_request_failure( if (ret == -EAGAIN || ret == -ENOMEM) goto queue_full; goto check_stop; - case PYX_TRANSPORT_USE_SENSE_REASON: - /* - * struct se_cmd->scsi_sense_reason already set - */ - break; default: pr_err("Unknown transport error for CDB 0x%02x: %d\n", - cmd->t_task_cdb[0], - cmd->transport_error_status); + cmd->t_task_cdb[0], cmd->scsi_sense_reason); cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; break; } @@ -1912,14 +1879,10 @@ static void transport_generic_request_failure( * transport_send_check_condition_and_sense() after handling * possible unsoliticied write data payloads. */ - if (!sc && !cmd->se_tfo->new_cmd_map) - transport_new_cmd_failure(cmd); - else { - ret = transport_send_check_condition_and_sense(cmd, - cmd->scsi_sense_reason, 0); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; - } + ret = transport_send_check_condition_and_sense(cmd, + cmd->scsi_sense_reason, 0); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; check_stop: transport_lun_remove_cmd(cmd); @@ -2077,8 +2040,8 @@ static int transport_execute_tasks(struct se_cmd *cmd) int add_tasks; if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - transport_generic_request_failure(cmd, 0, 1); + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + transport_generic_request_failure(cmd); return 0; } @@ -2163,14 +2126,13 @@ check_depth: else error = dev->transport->do_task(task); if (error != 0) { - cmd->transport_error_status = error; spin_lock_irqsave(&cmd->t_state_lock, flags); task->task_flags &= ~TF_ACTIVE; spin_unlock_irqrestore(&cmd->t_state_lock, flags); atomic_set(&cmd->t_transport_sent, 0); transport_stop_tasks_for_cmd(cmd); atomic_inc(&dev->depth_left); - transport_generic_request_failure(cmd, 0, 1); + transport_generic_request_failure(cmd); } goto check_depth; @@ -2178,19 +2140,6 @@ check_depth: return 0; } -void transport_new_cmd_failure(struct se_cmd *se_cmd) -{ - unsigned long flags; - /* - * Any unsolicited data will get dumped for failed command inside of - * the fabric plugin - */ - spin_lock_irqsave(&se_cmd->t_state_lock, flags); - se_cmd->se_cmd_flags |= SCF_SE_CMD_FAILED; - se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); -} - static inline u32 transport_get_sectors_6( unsigned char *cdb, struct se_cmd *cmd, @@ -2460,27 +2409,6 @@ static int transport_get_sense_data(struct se_cmd *cmd) return -1; } -static int -transport_handle_reservation_conflict(struct se_cmd *cmd) -{ - cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; - cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT; - /* - * For UA Interlock Code 11b, a RESERVATION CONFLICT will - * establish a UNIT ATTENTION with PREVIOUS RESERVATION - * CONFLICT STATUS. - * - * See spc4r17, section 7.4.6 Control Mode Page, Table 349 - */ - if (cmd->se_sess && - cmd->se_dev->se_sub_dev->se_dev_attrib.emulate_ua_intlck_ctrl == 2) - core_scsi3_ua_allocate(cmd->se_sess->se_node_acl, - cmd->orig_fe_lun, 0x2C, - ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS); - return -EINVAL; -} - static inline long long transport_dev_end_lba(struct se_device *dev) { return dev->transport->get_blocks(dev) + 1; @@ -2595,8 +2523,12 @@ static int transport_generic_cmd_sequencer( */ if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type) != 0) { if (su_dev->t10_pr.pr_ops.t10_seq_non_holder( - cmd, cdb, pr_reg_type) != 0) - return transport_handle_reservation_conflict(cmd); + cmd, cdb, pr_reg_type) != 0) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EBUSY; + } /* * This means the CDB is allowed for the SCSI Initiator port * when said port is *NOT* holding the legacy SPC-2 or @@ -3813,7 +3745,7 @@ int transport_generic_new_cmd(struct se_cmd *cmd) cmd->data_length) { ret = transport_generic_get_mem(cmd); if (ret < 0) - return ret; + goto out_fail; } /* @@ -3929,7 +3861,7 @@ static int transport_generic_write_pending(struct se_cmd *cmd) else if (ret < 0) return ret; - return PYX_TRANSPORT_WRITE_PENDING; + return 1; queue_full: pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd); @@ -4602,9 +4534,6 @@ void transport_send_task_abort(struct se_cmd *cmd) if (cmd->se_tfo->write_pending_status(cmd) != 0) { atomic_inc(&cmd->t_transport_aborted); smp_mb__after_atomic_inc(); - cmd->scsi_status = SAM_STAT_TASK_ABORTED; - transport_new_cmd_failure(cmd); - return; } } cmd->scsi_status = SAM_STAT_TASK_ABORTED; @@ -4698,18 +4627,13 @@ get_cmd: } ret = cmd->se_tfo->new_cmd_map(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); break; } ret = transport_generic_new_cmd(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); + break; } break; case TRANSPORT_PROCESS_WRITE: diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 4fac37c..71fc9ce 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -200,7 +200,7 @@ int ft_write_pending(struct se_cmd *se_cmd) lport = ep->lp; fp = fc_frame_alloc(lport, sizeof(*txrdy)); if (!fp) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + return -ENOMEM; /* Signal QUEUE_FULL */ txrdy = fc_frame_payload_get(fp, sizeof(*txrdy)); memset(txrdy, 0, sizeof(*txrdy)); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 7f5fed3..4d0cb6b 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,7 +103,6 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, - SCF_SE_CMD_FAILED = 0x00000400, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -154,6 +153,7 @@ enum tcm_sense_reason_table { TCM_CHECK_CONDITION_ABORT_CMD = 0x0d, TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e, TCM_CHECK_CONDITION_NOT_READY = 0x0f, + TCM_RESERVATION_CONFLICT = 0x10, }; struct se_obj { @@ -422,8 +422,6 @@ struct se_cmd { int sam_task_attr; /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; - /* Transport specific error status */ - int transport_error_status; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ int check_release:1; int cmd_wait_set:1; diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index c16e943..dac4f2d 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -10,29 +10,6 @@ #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */ -#define PYX_TRANSPORT_SENT_TO_TRANSPORT 0 -#define PYX_TRANSPORT_WRITE_PENDING 1 - -#define PYX_TRANSPORT_UNKNOWN_SAM_OPCODE -1 -#define PYX_TRANSPORT_HBA_QUEUE_FULL -2 -#define PYX_TRANSPORT_REQ_TOO_MANY_SECTORS -3 -#define PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES -4 -#define PYX_TRANSPORT_INVALID_CDB_FIELD -5 -#define PYX_TRANSPORT_INVALID_PARAMETER_LIST -6 -#define PYX_TRANSPORT_LU_COMM_FAILURE -7 -#define PYX_TRANSPORT_UNKNOWN_MODE_PAGE -8 -#define PYX_TRANSPORT_WRITE_PROTECTED -9 -#define PYX_TRANSPORT_RESERVATION_CONFLICT -10 -#define PYX_TRANSPORT_ILLEGAL_REQUEST -11 -#define PYX_TRANSPORT_USE_SENSE_REASON -12 - -#ifndef SAM_STAT_RESERVATION_CONFLICT -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#endif - -#define TRANSPORT_PLUGIN_FREE 0 -#define TRANSPORT_PLUGIN_REGISTERED 1 - #define TRANSPORT_PLUGIN_PHBA_PDEV 1 #define TRANSPORT_PLUGIN_VHBA_PDEV 2 #define TRANSPORT_PLUGIN_VHBA_VDEV 3 @@ -158,7 +135,6 @@ extern int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); extern int transport_handle_cdb_direct(struct se_cmd *); extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); -extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); extern bool target_stop_task(struct se_task *task, unsigned long *flags); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, -- cgit v0.10.2 From 0957627a99604f379d35831897a2aa15272528fc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 11:36:38 -0700 Subject: iscsi-target: Fix sess allocation leak in iscsi_login_zero_tsih_s1 This patch adds missing kfree() for an allocation in iscsi_login_zero_tsih_s1() code, and make transport_init_session() check for IS_ERR() returns. Reported-by: Dan Carpenter Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index daad362..d734bde 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -224,7 +224,7 @@ static int iscsi_login_zero_tsih_s1( iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Could not allocate memory for session\n"); - return -1; + return -ENOMEM; } iscsi_login_set_conn_values(sess, conn, pdu->cid); @@ -250,7 +250,8 @@ static int iscsi_login_zero_tsih_s1( pr_err("idr_pre_get() for sess_idr failed\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } spin_lock(&sess_idr_lock); idr_get_new(&sess_idr, NULL, &sess->session_index); @@ -270,14 +271,16 @@ static int iscsi_login_zero_tsih_s1( ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Unable to allocate memory for" " struct iscsi_sess_ops.\n"); - return -1; + kfree(sess); + return -ENOMEM; } sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } return 0; -- cgit v0.10.2 From 330694a50f5b80e983136237c10516810fb427a9 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 6 Nov 2011 18:37:23 +0100 Subject: target: Improve system responsivity during I/O While testing ib_srpt I noticed that the target system became rather unresponsive during intensive I/O. The patch below made my target system responsive again during I/O without decreasing performance. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a997fde..06cce81 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4599,8 +4599,6 @@ static int transport_processing_thread(void *param) struct se_cmd *cmd; struct se_device *dev = (struct se_device *) param; - set_user_nice(current, -20); - while (!kthread_should_stop()) { ret = wait_event_interruptible(dev->dev_queue_obj.thread_wq, atomic_read(&dev->dev_queue_obj.queue_cnt) || -- cgit v0.10.2 From 5f655e8d2a7cdc41943f929e86054051d7441ec5 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 8 Nov 2011 20:46:29 +0100 Subject: target: Avoid compiler warnings about signed one-bit bitfields Convert to unsigned bit fields for active I/O shutdown fields. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 4d0cb6b..36a06f7 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -423,8 +423,8 @@ struct se_cmd { /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ - int check_release:1; - int cmd_wait_set:1; + unsigned check_release:1; + unsigned cmd_wait_set:1; /* See se_cmd_flags_table */ u32 se_cmd_flags; u32 se_ordered_id; @@ -560,7 +560,7 @@ struct se_node_acl { } ____cacheline_aligned; struct se_session { - int sess_tearing_down:1; + unsigned sess_tearing_down:1; u64 sess_bin_isid; struct se_node_acl *se_node_acl; struct se_portal_group *se_tpg; -- cgit v0.10.2 From 97c34f3b04978799fd6eada69e1a8d84b74d9599 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 10 Nov 2011 11:22:47 -0800 Subject: target: Get rid of unused se_cmd_cache Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 06cce81..b4073d28 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -61,7 +61,6 @@ static int sub_api_initialized; static struct workqueue_struct *target_completion_wq; -static struct kmem_cache *se_cmd_cache; static struct kmem_cache *se_sess_cache; struct kmem_cache *se_tmr_req_cache; struct kmem_cache *se_ua_cache; @@ -87,19 +86,13 @@ static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) { - se_cmd_cache = kmem_cache_create("se_cmd_cache", - sizeof(struct se_cmd), __alignof__(struct se_cmd), 0, NULL); - if (!se_cmd_cache) { - pr_err("kmem_cache_create for struct se_cmd failed\n"); - goto out; - } se_tmr_req_cache = kmem_cache_create("se_tmr_cache", sizeof(struct se_tmr_req), __alignof__(struct se_tmr_req), 0, NULL); if (!se_tmr_req_cache) { pr_err("kmem_cache_create() for struct se_tmr_req" " failed\n"); - goto out_free_cmd_cache; + goto out; } se_sess_cache = kmem_cache_create("se_sess_cache", sizeof(struct se_session), __alignof__(struct se_session), @@ -182,8 +175,6 @@ out_free_sess_cache: kmem_cache_destroy(se_sess_cache); out_free_tmr_req_cache: kmem_cache_destroy(se_tmr_req_cache); -out_free_cmd_cache: - kmem_cache_destroy(se_cmd_cache); out: return -ENOMEM; } @@ -191,7 +182,6 @@ out: void release_se_kmem_caches(void) { destroy_workqueue(target_completion_wq); - kmem_cache_destroy(se_cmd_cache); kmem_cache_destroy(se_tmr_req_cache); kmem_cache_destroy(se_sess_cache); kmem_cache_destroy(se_ua_cache); -- cgit v0.10.2 From 6297b07cbc42eb6b53eb88fce70a4727ea230797 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 12 Nov 2011 09:29:51 -0800 Subject: target: Drop config_item_name usage in fabric TFO->free_wwn() This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index cbf5e45..0ca89f0 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -1342,17 +1342,16 @@ void tcm_loop_drop_scsi_hba( { struct tcm_loop_hba *tl_hba = container_of(wwn, struct tcm_loop_hba, tl_hba_wwn); - int host_no = tl_hba->sh->host_no; + + pr_debug("TCM_Loop_ConfigFS: Deallocating emulated Target" + " SAS Address: %s at Linux/SCSI Host ID: %d\n", + tl_hba->tl_wwn_address, tl_hba->sh->host_no); /* * Call device_unregister() on the original tl_hba->dev. * tcm_loop_fabric_scsi.c:tcm_loop_release_adapter() will * release *tl_hba; */ device_unregister(&tl_hba->dev); - - pr_debug("TCM_Loop_ConfigFS: Deallocated emulated Target" - " SAS Address: %s at Linux/SCSI Host ID: %d\n", - config_item_name(&wwn->wwn_group.cg_item), host_no); } /* Start items for tcm_loop_cit */ diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 5f77041..9402b73 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -436,8 +436,7 @@ static void ft_del_lport(struct se_wwn *wwn) struct ft_lport_acl *lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn); - pr_debug("del lport %s\n", - config_item_name(&wwn->wwn_group.cg_item)); + pr_debug("del lport %s\n", lacl->name); mutex_lock(&ft_lport_lock); list_del(&lacl->list); mutex_unlock(&ft_lport_lock); -- cgit v0.10.2 From 58a2801a4b9ad97d3685bb7a3344e17d60292908 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:27 -0500 Subject: target: remove the se_obj_ptr and se_orig_obj_ptr se_cmd fields We already have a perfectly valid se_device pointer in the command, so remove the mostly useless duplicates. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 0795328..dd5adb8 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -104,7 +104,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); @@ -137,7 +136,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->orig_fe_lun = 0; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } /* @@ -200,7 +198,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_dev; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b4073d28..db2271c 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2029,7 +2029,7 @@ static int transport_execute_tasks(struct se_cmd *cmd) { int add_tasks; - if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { + if (se_dev_check_online(cmd->se_dev) != 0) { cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; transport_generic_request_failure(cmd); return 0; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 36a06f7..f639973 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -444,8 +444,6 @@ struct se_cmd { struct list_head se_qf_node; struct se_device *se_dev; struct se_dev_entry *se_deve; - struct se_device *se_obj_ptr; - struct se_device *se_orig_obj_ptr; struct se_lun *se_lun; /* Only used for internal passthrough and legacy TCM fabric modules */ struct se_session *se_sess; -- cgit v0.10.2 From aad13ca20d960ab74b739d7bbe876dac4502f546 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:28 -0500 Subject: target: remove the se_ordered_node se_cmd field We never walk ordered_cmd_list in the se_device, so remove all code related to supporting it. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index db2271c..a66050e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1332,12 +1332,10 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->dev_tmr_list); INIT_LIST_HEAD(&dev->execute_task_list); INIT_LIST_HEAD(&dev->delayed_cmd_list); - INIT_LIST_HEAD(&dev->ordered_cmd_list); INIT_LIST_HEAD(&dev->state_task_list); INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->ordered_cmd_lock); spin_lock_init(&dev->state_task_lock); spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); @@ -1498,7 +1496,6 @@ void transport_init_se_cmd( { INIT_LIST_HEAD(&cmd->se_lun_node); INIT_LIST_HEAD(&cmd->se_delayed_node); - INIT_LIST_HEAD(&cmd->se_ordered_node); INIT_LIST_HEAD(&cmd->se_qf_node); INIT_LIST_HEAD(&cmd->se_queue_node); INIT_LIST_HEAD(&cmd->se_cmd_list); @@ -1963,11 +1960,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) cmd->se_ordered_id); return 1; } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&cmd->se_dev->ordered_cmd_lock); - list_add_tail(&cmd->se_ordered_node, - &cmd->se_dev->ordered_cmd_list); - spin_unlock(&cmd->se_dev->ordered_cmd_lock); - atomic_inc(&cmd->se_dev->dev_ordered_sync); smp_mb__after_atomic_inc(); @@ -3100,11 +3092,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&dev->ordered_cmd_lock); - list_del(&cmd->se_ordered_node); atomic_dec(&dev->dev_ordered_sync); smp_mb__after_atomic_dec(); - spin_unlock(&dev->ordered_cmd_lock); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED:" diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index f639973..2977334 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -439,7 +439,6 @@ struct se_cmd { /* Used for sense data */ void *sense_buffer; struct list_head se_delayed_node; - struct list_head se_ordered_node; struct list_head se_lun_node; struct list_head se_qf_node; struct se_device *se_dev; @@ -730,7 +729,6 @@ struct se_device { struct se_obj dev_export_obj; struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; - spinlock_t ordered_cmd_lock; spinlock_t execute_task_lock; spinlock_t state_task_lock; spinlock_t dev_alua_lock; @@ -756,7 +754,6 @@ struct se_device { struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; - struct list_head ordered_cmd_list; struct list_head execute_task_list; struct list_head state_task_list; struct list_head qf_cmd_list; -- cgit v0.10.2 From 2d3a4b51df4db2ee0415f42a63b9629a7977b975 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:29 -0500 Subject: target: remove the t_tasks_fua se_cmd field And use a SCF_FUA flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index cdd47e8..3821132 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -438,7 +438,7 @@ static int fd_do_task(struct se_task *task) if (ret > 0 && dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0 && dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - cmd->t_tasks_fua) { + (cmd->se_cmd_flags & SCF_FUA)) { /* * We might need to be a bit smarter here * and return some sense data to let the initiator diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index c670b8c..4aa9922 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -531,7 +531,7 @@ static int iblock_do_task(struct se_task *task) */ if (dev->se_sub_dev->se_dev_attrib.emulate_write_cache == 0 || (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - task->task_se_cmd->t_tasks_fua)) + (cmd->se_cmd_flags & SCF_FUA))) rw = WRITE_FUA; else rw = WRITE; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a66050e..866af5d 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2572,7 +2572,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_12: @@ -2581,7 +2582,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_16: @@ -2590,7 +2592,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_64(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case XDWRITEREAD_10: @@ -2614,7 +2617,8 @@ static int transport_generic_cmd_sequencer( * Setup BIDI XOR callback to be run after I/O completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case VARIABLE_LENGTH_CMD: service_action = get_unaligned_be16(&cdb[8]); @@ -2642,7 +2646,8 @@ static int transport_generic_cmd_sequencer( * completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[10] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case WRITE_SAME_32: sectors = transport_get_sectors_32(cdb, cmd, §or_ret); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 2977334..357af45 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,6 +103,7 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, + SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -458,7 +459,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - int t_tasks_fua; bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; -- cgit v0.10.2 From 33c3fafc43e56a22be60ebe67bec5ba763d51010 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:30 -0500 Subject: target: remove the t_tasks_bidi se_cmd field And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 0ca89f0..81d5832 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -113,11 +113,9 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( scsi_bufflen(sc), sc->sc_data_direction, sam_task_attr, &tl_cmd->tl_sense_buf[0]); - /* - * Signal BIDI usage with T_TASK(cmd)->t_tasks_bidi - */ if (scsi_bidi_cmnd(sc)) - se_cmd->t_tasks_bidi = 1; + se_cmd->se_cmd_flags |= SCF_BIDI; + /* * Locate the struct se_lun pointer and attach it to struct se_cmd */ @@ -154,7 +152,7 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. */ - if (se_cmd->t_tasks_bidi) { + if (se_cmd->se_cmd_flags & SCF_BIDI) { struct scsi_data_buffer *sdb = scsi_in(sc); sgl_bidi = sdb->table.sgl; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 866af5d..8f29f47 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2598,7 +2598,7 @@ static int transport_generic_cmd_sequencer( break; case XDWRITEREAD_10: if ((cmd->data_direction != DMA_TO_DEVICE) || - !(cmd->t_tasks_bidi)) + !(cmd->se_cmd_flags & SCF_BIDI)) goto out_invalid_cdb_field; sectors = transport_get_sectors_10(cdb, cmd, §or_ret); if (sector_ret) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 357af45..3f9e4da 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -106,6 +106,7 @@ enum se_cmd_flags_table { SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, + SCF_BIDI = 0x00002000, SCF_SENT_CHECK_CONDITION = 0x00004000, SCF_OVERFLOW_BIT = 0x00008000, SCF_UNDERFLOW_BIT = 0x00010000, @@ -459,7 +460,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; atomic_t t_se_count; -- cgit v0.10.2 From 6fd126ffebef3897d8fca98644a9fd1cc5c7a5e3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:31 -0500 Subject: target: remove the unused t_task_pt_sgl and t_task_pt_sgl_num se_cmd fields Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3f9e4da..3a21e22 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -484,14 +484,6 @@ struct se_cmd { struct work_struct work; - /* - * Used for pre-registered fabric SGL passthrough WRITE and READ - * with the special SCF_PASSTHROUGH_CONTIG_TO_SG case for TCM_Loop - * and other HW target mode fabric modules. - */ - struct scatterlist *t_task_pt_sgl; - u32 t_task_pt_sgl_num; - struct scatterlist *t_data_sg; unsigned int t_data_nents; struct scatterlist *t_bidi_data_sg; -- cgit v0.10.2 From fef58a6096770ed6ab49103a430cc755254a74d9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 22:13:24 -0800 Subject: target: Reject SCSI data overflow for fabrics using transport_generic_map_mem_to_cmd This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents. This addresses an OOPs where transport_allocate_data_tasks() would walk the incorrect post OVERFLOW cmd->data_length value beyond the end of the passed scatterlist. Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8f29f47..0bdb6ba 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3411,6 +3411,18 @@ int transport_generic_map_mem_to_cmd( if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) || (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) { + /* + * Reject SCSI data overflow with map_mem_to_cmd() as incoming + * scatterlists already have been set to follow what the fabric + * passes for the original expected data transfer length. + */ + if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { + pr_warn("Rejecting SCSI DATA overflow for fabric using" + " SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC\n"); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } cmd->t_data_sg = sgl; cmd->t_data_nents = sgl_count; -- cgit v0.10.2 From 7e46cf02687e40197ae07c623e660be2a2720064 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 23:59:00 -0800 Subject: iscsi-target: Fix residual count hanlding + remove iscsi_cmd->residual_count This patch fixes iscsi-target handling of underflow where residual data is causing an OOPs by using the incorrect iscsi_cmd_t->data_length initially assigned in iscsit_allocate_se_cmd(). It resets iscsi_cmd_t->data_length from se_cmd_t->data_length after transport_generic_allocate_tasks() has been invoked in iscsit_handle_scsi_cmd() RX context, and converts iscsi_cmd->residual_count usage to access iscsi_cmd->se_cmd.residual_count to get the proper residual count set by target-core. Reported-by: Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 4d81e10..26834ef 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1039,6 +1039,8 @@ done: */ send_check_condition = 1; } else { + cmd->data_length = cmd->se_cmd.data_length; + if (iscsit_decide_list_to_build(cmd, payload_length) < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, @@ -2508,10 +2510,10 @@ static int iscsit_send_data_in( if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } } hton24(hdr->dlength, datain.length); @@ -3013,10 +3015,10 @@ static int iscsit_send_status( hdr->flags |= ISCSI_FLAG_CMD_FINAL; if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } hdr->response = cmd->iscsi_response; hdr->cmd_status = cmd->se_cmd.scsi_status; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 3723d90..0e96a6b 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -398,7 +398,6 @@ struct iscsi_cmd { u32 pdu_send_order; /* Current struct iscsi_pdu in struct iscsi_cmd->pdu_list */ u32 pdu_start; - u32 residual_count; /* Next struct iscsi_seq to send in struct iscsi_cmd->seq_list */ u32 seq_send_order; /* Number of struct iscsi_seq in struct iscsi_cmd->seq_list */ -- cgit v0.10.2 From 7ae0b1038f9f7d4c91e9afd4dbbc98210bf1a241 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 27 Nov 2011 22:25:14 -0800 Subject: iscsi-target: Add missing F_BIT for iscsi_tm_rsp This patch sets the missing ISCSI_FLAG_CMD_FINAL bit in iscsit_send_task_mgt_rsp() for a struct iscsi_tm_rsp PDU. This usage is hardcoded for all TM response PDUs in RFC-3720 section 10.6. Reported-by: whucecil Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 26834ef..02de527 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3130,6 +3130,7 @@ static int iscsit_send_task_mgt_rsp( hdr = (struct iscsi_tm_rsp *) cmd->pdu; memset(hdr, 0, ISCSI_HDR_LEN); hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP; + hdr->flags = ISCSI_FLAG_CMD_FINAL; hdr->response = iscsit_convert_tcm_tmr_rsp(se_tmr); hdr->itt = cpu_to_be32(cmd->init_task_tag); cmd->stat_sn = conn->stat_sn++; -- cgit v0.10.2 From 1c3d5794fc4a2afd2258b3aa6406377934a36663 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 23:43:40 +0100 Subject: iscsi-target: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 02de527..8599545 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -614,13 +614,12 @@ int iscsit_add_reject( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); spin_lock_bh(&conn->cmd_lock); list_add_tail(&cmd->i_list, &conn->conn_cmd_list); @@ -661,13 +660,12 @@ int iscsit_add_reject_from_cmd( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); if (add_to_conn) { spin_lock_bh(&conn->cmd_lock); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 426cd4b..98936cb 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -981,14 +981,13 @@ struct iscsi_login *iscsi_target_init_negotiation( return NULL; } - login->req = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + login->req = kmemdup(login_pdu, ISCSI_HDR_LEN, GFP_KERNEL); if (!login->req) { pr_err("Unable to allocate memory for Login Request.\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); goto out; } - memcpy(login->req, login_pdu, ISCSI_HDR_LEN); login->req_buf = kzalloc(MAX_KEY_VALUE_PAIRS, GFP_KERNEL); if (!login->req_buf) { -- cgit v0.10.2 From 410f670202f0f13cdac8459b9c3effeeead135d1 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:32 -0800 Subject: target: Don't return an error status for 0-length READ and WRITE IO commands with a TRANSFER LENGTH of 0 are not an error; for example, for READ (10) and WRITE (10), SBC-3 says: A TRANSFER LENGTH field set to zero specifies that no logical blocks shall be read. This condition shall not be considered an error. In case we have nothing to do, just complete the command with good status. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0bdb6ba..1b760a0 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3770,8 +3770,15 @@ int transport_generic_new_cmd(struct se_cmd *cmd) task_cdbs = transport_allocate_control_task(cmd); } - if (task_cdbs <= 0) + if (task_cdbs < 0) goto out_fail; + else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { + cmd->t_state = TRANSPORT_COMPLETE; + atomic_set(&cmd->t_transport_active, 1); + INIT_WORK(&cmd->work, target_complete_ok_work); + queue_work(target_completion_wq, &cmd->work); + return 0; + } if (set_counts) { atomic_inc(&cmd->t_fe_count); -- cgit v0.10.2 From 9b5cd7f37e1e018432111333e2a67f78ba41edfe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:33 -0800 Subject: target: Handle 0 correctly in transport_get_sectors_6() SBC-3 says: A TRANSFER LENGTH field set to zero specifies that 256 logical blocks shall be written. Any other value specifies the number of logical blocks that shall be written. The old code was always just returning the value in the TRANSFER LENGTH byte. Fix this to return 256 if the byte is 0. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 1b760a0..9faaaae 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2144,10 +2144,15 @@ static inline u32 transport_get_sectors_6( /* * Everything else assume TYPE_DISK Sector CDB location. - * Use 8-bit sector value. + * Use 8-bit sector value. SBC-3 says: + * + * A TRANSFER LENGTH field set to zero specifies that 256 + * logical blocks shall be written. Any other value + * specifies the number of logical blocks that shall be + * written. */ type_disk: - return (u32)cdb[4]; + return cdb[4] ? : 256; } static inline u32 transport_get_sectors_10( -- cgit v0.10.2 From 1289a0571c037b4757f60597d646aedb70361ec3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:34 -0800 Subject: target: Fix page length in emulated INQUIRY VPD page 86h The LSB of the page length is at offset 3, not 2. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 8013a5a..831468b 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -478,7 +478,7 @@ target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) if (cmd->data_length < 60) return 0; - buf[2] = 0x3c; + buf[3] = 0x3c; /* Set HEADSUP, ORDSUP, SIMPSUP */ buf[5] = 0x07; -- cgit v0.10.2 From 5c73b678f729ea087ef57b59a5d7b5dd3a97042b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Thu, 24 Nov 2011 02:04:16 +0100 Subject: target: remove unused struct fields Some are never used, some are set but never read, dev_hoq_count is incremented and decremented, but never read. Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 0e96a6b..f1a02da 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -534,7 +534,6 @@ struct iscsi_conn { atomic_t connection_exit; atomic_t connection_recovery; atomic_t connection_reinstatement; - atomic_t connection_wait; atomic_t connection_wait_rcfr; atomic_t sleep_on_conn_wait_comp; atomic_t transport_failed; @@ -642,7 +641,6 @@ struct iscsi_session { atomic_t session_reinstatement; atomic_t session_stop_active; atomic_t sleep_on_sess_wait_comp; - atomic_t transport_wait_cmds; /* connection list */ struct list_head sess_conn_list; struct list_head cr_active_list; diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index cd61331..1dcbef4 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -1191,7 +1191,6 @@ void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp) * struct t10_alua_lu_gp. */ spin_lock(&lu_gps_lock); - atomic_set(&lu_gp->lu_gp_shutdown, 1); list_del(&lu_gp->lu_gp_node); alua_lu_gps_count--; spin_unlock(&lu_gps_lock); @@ -1445,7 +1444,6 @@ struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem( tg_pt_gp_mem->tg_pt = port; port->sep_alua_tg_pt_gp_mem = tg_pt_gp_mem; - atomic_set(&port->sep_tg_pt_gp_active, 1); return tg_pt_gp_mem; } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9faaaae..0257658 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1326,7 +1326,6 @@ struct se_device *transport_add_device_to_core_hba( dev->se_hba = hba; dev->se_sub_dev = se_dev; dev->transport = transport; - atomic_set(&dev->active_cmds, 0); INIT_LIST_HEAD(&dev->dev_list); INIT_LIST_HEAD(&dev->dev_sep_list); INIT_LIST_HEAD(&dev->dev_tmr_list); @@ -1336,11 +1335,8 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->state_task_lock); - spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); spin_lock_init(&dev->dev_status_lock); - spin_lock_init(&dev->dev_status_thr_lock); spin_lock_init(&dev->se_port_lock); spin_lock_init(&dev->se_tmr_lock); spin_lock_init(&dev->qf_cmd_lock); @@ -1952,8 +1948,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * to allow the passed struct se_cmd list of tasks to the front of the list. */ if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_inc(&cmd->se_dev->dev_hoq_count); - smp_mb__after_atomic_inc(); pr_debug("Added HEAD_OF_QUEUE for CDB:" " 0x%02x, se_ordered_id: %u\n", cmd->t_task_cdb[0], @@ -3095,8 +3089,6 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_dec(&dev->dev_hoq_count); - smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3a21e22..098a156 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -213,7 +213,6 @@ struct t10_alua_lu_gp { u16 lu_gp_id; int lu_gp_valid_id; u32 lu_gp_members; - atomic_t lu_gp_shutdown; atomic_t lu_gp_ref_cnt; spinlock_t lu_gp_lock; struct config_group lu_gp_group; @@ -679,9 +678,6 @@ struct se_subsystem_dev { } ____cacheline_aligned; struct se_device { - /* Set to 1 if thread is NOT sleeping on thread_sem */ - u8 thread_active; - u8 dev_status_timer_flags; /* RELATIVE TARGET PORT IDENTIFER Counter */ u16 dev_rpti_counter; /* Used for SAM Task Attribute ordering */ @@ -706,14 +702,10 @@ struct se_device { u64 write_bytes; spinlock_t stats_lock; /* Active commands on this virtual SE device */ - atomic_t active_cmds; atomic_t simple_cmds; atomic_t depth_left; atomic_t dev_ordered_id; - atomic_t dev_tur_active; atomic_t execute_tasks; - atomic_t dev_status_thr_count; - atomic_t dev_hoq_count; atomic_t dev_ordered_sync; atomic_t dev_qf_count; struct se_obj dev_obj; @@ -722,12 +714,8 @@ struct se_device { struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; spinlock_t execute_task_lock; - spinlock_t state_task_lock; - spinlock_t dev_alua_lock; spinlock_t dev_reservation_lock; - spinlock_t dev_state_lock; spinlock_t dev_status_lock; - spinlock_t dev_status_thr_lock; spinlock_t se_port_lock; spinlock_t se_tmr_lock; spinlock_t qf_cmd_lock; @@ -739,11 +727,8 @@ struct se_device { struct t10_pr_registration *dev_pr_res_holder; struct list_head dev_sep_list; struct list_head dev_tmr_list; - struct timer_list dev_status_timer; /* Pointer to descriptor for processing thread */ struct task_struct *process_thread; - pid_t process_thread_pid; - struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; struct list_head execute_task_list; @@ -756,8 +741,6 @@ struct se_device { struct se_subsystem_api *transport; /* Linked list for struct se_hba struct se_device list */ struct list_head dev_list; - /* Linked list for struct se_global->g_se_dev_list */ - struct list_head g_se_dev_list; } ____cacheline_aligned; struct se_hba { @@ -819,7 +802,6 @@ struct se_port { u32 sep_index; struct scsi_port_stats sep_stats; /* Used for ALUA Target Port Groups membership */ - atomic_t sep_tg_pt_gp_active; atomic_t sep_tg_pt_secondary_offline; /* Used for PR ALL_TG_PT=1 */ atomic_t sep_tg_pt_ref_cnt; -- cgit v0.10.2 From 9649fa1b8764f64c8cc4293e197e14cd46fe7205 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 28 Nov 2011 12:33:10 +0100 Subject: target/file: walk properly over sg list This patch changes fileio to use for_each_sg() when walking se_task->task_sg memory passed into from loopback LLD struct scsi_cmnd scatterlist memory. This addresses an issue where FILEIO backends with loopback where hitting the following OOPs with mkfs.ext2: |kernel BUG at include/linux/scatterlist.h:97! |invalid opcode: 0000 [#1] PREEMPT SMP |Modules linked in: sd_mod tcm_loop target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs scsi_mod | |Pid: 671, comm: LIO_fileio Not tainted 3.1.0-rc10+ #139 Bochs Bochs |EIP: 0060:[] EFLAGS: 00010202 CPU: 0 |EIP is at fd_do_task+0x396/0x420 [target_core_file] | [] __transport_execute_tasks+0xd4/0x190 [target_core_mod] | [] transport_execute_tasks+0x3c/0xf0 [target_core_mod] |EIP: [] fd_do_task+0x396/0x420 [target_core_file] SS:ESP 0068:dea47e90 Signed-off-by: Sebastian Andrzej Siewior Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 3821132..b4864fb 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -289,9 +289,9 @@ static int fd_do_readv(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); @@ -342,9 +342,9 @@ static int fd_do_writev(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); -- cgit v0.10.2 From 6f21475576dde397cd2580262209d4080fbd5458 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Nov 2011 03:29:59 -0500 Subject: target: remove the unused se_dev_list Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index e0c1e8a..93d4f6a 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -67,9 +67,6 @@ static struct config_group target_core_hbagroup; static struct config_group alua_group; static struct config_group alua_lu_gps_group; -static DEFINE_SPINLOCK(se_device_lock); -static LIST_HEAD(se_dev_list); - static inline struct se_hba * item_to_hba(struct config_item *item) { @@ -2741,7 +2738,6 @@ static struct config_group *target_core_make_subdev( " struct se_subsystem_dev\n"); goto unlock; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); @@ -2777,9 +2773,6 @@ static struct config_group *target_core_make_subdev( " from allocate_virtdevice()\n"); goto out; } - spin_lock(&se_device_lock); - list_add_tail(&se_dev->se_dev_node, &se_dev_list); - spin_unlock(&se_device_lock); config_group_init_type_name(&se_dev->se_dev_group, name, &target_core_dev_cit); @@ -2874,10 +2867,6 @@ static void target_core_drop_subdev( mutex_lock(&hba->hba_access_mutex); t = hba->transport; - spin_lock(&se_device_lock); - list_del(&se_dev->se_dev_node); - spin_unlock(&se_device_lock); - dev_stat_grp = &se_dev->dev_stat_grps.stat_group; for (i = 0; dev_stat_grp->default_groups[i]; i++) { df_item = &dev_stat_grp->default_groups[i]->cg_item; diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index dd5adb8..e2be1f5 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1584,7 +1584,6 @@ int core_dev_setup_virtual_lun0(void) ret = -ENOMEM; goto out; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 098a156..6873c7d 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -669,7 +669,6 @@ struct se_subsystem_dev { struct t10_reservation t10_pr; spinlock_t se_dev_lock; void *se_dev_su_ptr; - struct list_head se_dev_node; struct config_group se_dev_group; /* For T10 Reservations */ struct config_group se_dev_pr_group; -- cgit v0.10.2 From 5bff9e8584fbcdb361dada5a0425724b9e31e608 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 25 Nov 2011 22:18:45 +0100 Subject: target/rd: simplify the page/offset computation Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during rd_request->rd_page assignment. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6d8a688..6119ed5 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -583,14 +583,12 @@ static int rd_MEMCPY_do_task(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; struct rd_request *req = RD_REQ(task); - unsigned long long lba; + u64 tmp; int ret; - req->rd_page = (task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size) / PAGE_SIZE; - lba = task->task_lba; - req->rd_offset = (do_div(lba, - (PAGE_SIZE / dev->se_sub_dev->se_dev_attrib.block_size))) * - dev->se_sub_dev->se_dev_attrib.block_size; + tmp = task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size; + req->rd_offset = do_div(tmp, PAGE_SIZE); + req->rd_page = tmp; req->rd_size = task->task_size; if (task->task_data_direction == DMA_FROM_DEVICE) -- cgit v0.10.2 From 65b0c78d5a0ca2cb82b7b9f54f855896e0d7fc10 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 30 Nov 2011 10:48:30 +0100 Subject: target/rd: fix or rewrite the copy routine So the code assumes that the sg list is only a array while in reality loopback SGL memory via scsi_cmnd into target-core may be already chained. This patch converts ramdisk code to use sg_miter logic from scatterlist.h in order to properly support passthrough SGL usage with transport_generic_map_mem_to_cmd() via loopback. With this patch the bug goes away. However after umount/mount of the device my files are gone. So something is still not right. After looking at it for a while I decided to rewrite the that part of the code and now things do work for me. For reference: - http://article.gmane.org/gmane.linux.scsi.target.devel/595 the sg_next() conversion - http://article.gmane.org/gmane.linux.scsi.target.devel/602 the rewrite of the copy code (nab: Fix compile warning in rd_MEMCPY) Signed-off-by: Sebastian Andrzej Siewior Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6119ed5..02e51fa 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -343,235 +343,74 @@ static struct rd_dev_sg_table *rd_get_sg_table(struct rd_dev *rd_dev, u32 page) return NULL; } -/* rd_MEMCPY_read(): - * - * - */ -static int rd_MEMCPY_read(struct rd_request *req) +static int rd_MEMCPY(struct rd_request *req, u32 read_rd) { struct se_task *task = &req->rd_task; struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; + struct scatterlist *rd_sg; + struct sg_mapping_iter m; u32 rd_offset = req->rd_offset; + u32 src_len; table = rd_get_sg_table(dev, req->rd_page); if (!table) return -EINVAL; - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = task->task_sg; - sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; + rd_sg = &table->sg_table[req->rd_page - table->page_start_offset]; - pr_debug("RD[%u]: Read LBA: %llu, Size: %u Page: %u, Offset:" - " %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - src_offset = rd_offset; + pr_debug("RD[%u]: %s LBA: %llu, Size: %u Page: %u, Offset: %u\n", + dev->rd_dev_id, read_rd ? "Read" : "Write", + task->task_lba, req->rd_size, req->rd_page, + rd_offset); + src_len = PAGE_SIZE - rd_offset; + sg_miter_start(&m, task->task_sg, task->task_sg_nents, + read_rd ? SG_MITER_TO_SG : SG_MITER_FROM_SG); while (req->rd_size) { - if ((sg_d[i].length - dst_offset) < - (sg_s[j].length - src_offset)) { - length = (sg_d[i].length - dst_offset); - - pr_debug("Step 1 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, j, - sg_s[j].length); - pr_debug("Step 1 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); - - if (length > req->rd_size) - length = req->rd_size; - - dst = sg_virt(&sg_d[i++]) + dst_offset; - BUG_ON(!dst); - - src = sg_virt(&sg_s[j]) + src_offset; - BUG_ON(!src); - - dst_offset = 0; - src_offset = length; - page_end = 0; - } else { - length = (sg_s[j].length - src_offset); - - pr_debug("Step 2 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, - j, sg_s[j].length); - pr_debug("Step 2 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); - - if (length > req->rd_size) - length = req->rd_size; - - dst = sg_virt(&sg_d[i]) + dst_offset; - BUG_ON(!dst); - - if (sg_d[i].length == length) { - i++; - dst_offset = 0; - } else - dst_offset = length; - - src = sg_virt(&sg_s[j++]) + src_offset; - BUG_ON(!src); - - src_offset = 0; - page_end = 1; - } + u32 len; + void *rd_addr; - memcpy(dst, src, length); + sg_miter_next(&m); + len = min((u32)m.length, src_len); + m.consumed = len; - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); + rd_addr = sg_virt(rd_sg) + rd_offset; - req->rd_size -= length; - if (!req->rd_size) - return 0; + if (read_rd) + memcpy(m.addr, rd_addr, len); + else + memcpy(rd_addr, m.addr, len); - if (!page_end) + req->rd_size -= len; + if (!req->rd_size) continue; - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); + src_len -= len; + if (src_len) { + rd_offset += len; continue; } - pr_debug("getting new page table for page: %u\n", - req->rd_page); - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - sg_s = &table->sg_table[j = 0]; - } - - return 0; -} - -/* rd_MEMCPY_write(): - * - * - */ -static int rd_MEMCPY_write(struct rd_request *req) -{ - struct se_task *task = &req->rd_task; - struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; - struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; - u32 rd_offset = req->rd_offset; - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = &table->sg_table[req->rd_page - table->page_start_offset]; - sg_s = task->task_sg; - - pr_debug("RD[%d] Write LBA: %llu, Size: %u, Page: %u," - " Offset: %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - dst_offset = rd_offset; - - while (req->rd_size) { - if ((sg_s[i].length - src_offset) < - (sg_d[j].length - dst_offset)) { - length = (sg_s[i].length - src_offset); - - pr_debug("Step 1 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 1 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i++]) + src_offset; - BUG_ON(!src); - - dst = sg_virt(&sg_d[j]) + dst_offset; - BUG_ON(!dst); - - src_offset = 0; - dst_offset = length; - page_end = 0; - } else { - length = (sg_d[j].length - dst_offset); - - pr_debug("Step 2 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 2 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i]) + src_offset; - BUG_ON(!src); - - if (sg_s[i].length == length) { - i++; - src_offset = 0; - } else - src_offset = length; - - dst = sg_virt(&sg_d[j++]) + dst_offset; - BUG_ON(!dst); - - dst_offset = 0; - page_end = 1; - } - - memcpy(dst, src, length); - - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); - - req->rd_size -= length; - if (!req->rd_size) - return 0; - - if (!page_end) - continue; - - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); + /* rd page completed, next one please */ + req->rd_page++; + rd_offset = 0; + src_len = PAGE_SIZE; + if (req->rd_page <= table->page_end_offset) { + rd_sg++; continue; } - pr_debug("getting new page table for page: %u\n", - req->rd_page); - table = rd_get_sg_table(dev, req->rd_page); - if (!table) + if (!table) { + sg_miter_stop(&m); return -EINVAL; + } - sg_d = &table->sg_table[j = 0]; + /* since we increment, the first sg entry is correct */ + rd_sg = table->sg_table; } - + sg_miter_stop(&m); return 0; } @@ -591,11 +430,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) req->rd_page = tmp; req->rd_size = task->task_size; - if (task->task_data_direction == DMA_FROM_DEVICE) - ret = rd_MEMCPY_read(req); - else - ret = rd_MEMCPY_write(req); - + ret = rd_MEMCPY(req, task->task_data_direction == DMA_FROM_DEVICE); if (ret != 0) return ret; -- cgit v0.10.2 From c638830d040696ff2bae07785fd4277e7e3fe7c4 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 30 Nov 2011 12:11:50 -0800 Subject: target: Don't return an error if disabling unsupported features If an attribute is present (but not yet supported) it should be OK to write 0 (a no-op) to the attribute. This is an issue because userspace should be able to save and restore all set attribute values without error. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index e2be1f5..9b86394 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -954,8 +954,12 @@ int se_dev_set_emulate_dpo(struct se_device *dev, int flag) return -EINVAL; } - pr_err("dpo_emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("dpo_emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) @@ -965,7 +969,7 @@ int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) return -EINVAL; } - if (dev->transport->fua_write_emulated == 0) { + if (flag && dev->transport->fua_write_emulated == 0) { pr_err("fua_write_emulated not supported\n"); return -EINVAL; } @@ -982,8 +986,12 @@ int se_dev_set_emulate_fua_read(struct se_device *dev, int flag) return -EINVAL; } - pr_err("ua read emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("ua read emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) @@ -992,7 +1000,7 @@ int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) pr_err("Illegal value %d\n", flag); return -EINVAL; } - if (dev->transport->write_cache_emulated == 0) { + if (flag && dev->transport->write_cache_emulated == 0) { pr_err("write_cache_emulated not supported\n"); return -EINVAL; } @@ -1053,7 +1061,7 @@ int se_dev_set_emulate_tpu(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } @@ -1074,7 +1082,7 @@ int se_dev_set_emulate_tpws(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } -- cgit v0.10.2 From ddca8f3ed36c5d25363dab6762829868af09cb02 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 6 Dec 2011 05:24:19 +0000 Subject: iscsi-target: Fix hex2bin warn_unused compile message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning with hex2bin() usage: drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’: drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c index beb3946..1cd6ce3 100644 --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -30,9 +30,11 @@ static int chap_string_to_hex(unsigned char *dst, unsigned char *src, int len) { - int j = DIV_ROUND_UP(len, 2); + int j = DIV_ROUND_UP(len, 2), rc; - hex2bin(dst, src, j); + rc = hex2bin(dst, src, j); + if (rc < 0) + pr_debug("CHAP string contains non hex digit symbols\n"); dst[j] = '\0'; return j; -- cgit v0.10.2 From cefcc03ffc9527dde56807339edb1719c8dbae5f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 20:50:45 +0000 Subject: ASoC: Provide a more complete DMA driver stub Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: Kyung-Kwee Ryu Tested-by: Kyung-Kwee Ryu Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 0c12b98..4220bb0 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -58,7 +58,36 @@ int snd_soc_params_to_bclk(struct snd_pcm_hw_params *params) } EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk); -static struct snd_soc_platform_driver dummy_platform; +static const struct snd_pcm_hardware dummy_dma_hardware = { + .formats = 0xffffffff, + .channels_min = 1, + .channels_max = UINT_MAX, + + /* Random values to keep userspace happy when checking constraints */ + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER, + .buffer_bytes_max = 128*1024, + .period_bytes_min = PAGE_SIZE, + .period_bytes_max = PAGE_SIZE*2, + .periods_min = 2, + .periods_max = 128, +}; + +static int dummy_dma_open(struct snd_pcm_substream *substream) +{ + snd_soc_set_runtime_hwparams(substream, &dummy_dma_hardware); + + return 0; +} + +static struct snd_pcm_ops dummy_dma_ops = { + .open = dummy_dma_open, + .ioctl = snd_pcm_lib_ioctl, +}; + +static struct snd_soc_platform_driver dummy_platform = { + .ops = &dummy_dma_ops, +}; static __devinit int snd_soc_dummy_probe(struct platform_device *pdev) { -- cgit v0.10.2 From 96f176a310e447966e45112fe4511b9d9fa0caf4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 6 Dec 2011 11:17:34 +0100 Subject: iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix compile error due to missing include. Signed-off-by: Joerg Roedel diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0..0fb7a17 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From dd13752537d36cc6c145cb040f71ce7acda31e6e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Dec 2011 23:14:39 +0000 Subject: x86/intel_mid: Fix the Kconfig for MID selection We currently fail to build on CONFIG_X86_INTEL_MID=y and CONFIG_X86_MRST unset. We could build all the bits to make generic MID work if you picked MID platform alone but that's really silly. Instead use select and two variables. This looks a bit daft right now but once we add a Medfield selection it'll start to look a good deal more sensible. Reported-by: Ingo Molnar Reported-by: Stanislaw Gruszka Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111205231433.28811.51297.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cb9a104..5553f9f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -390,7 +390,7 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_INTEL_MID +config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM @@ -399,7 +399,7 @@ config X86_INTEL_MID systems which do not have the PCI legacy interfaces (Moorestown, Medfield). If you are building for a PC class system say N here. -if X86_INTEL_MID +if X86_WANT_INTEL_MID config X86_MRST bool "Moorestown MID platform" @@ -411,6 +411,7 @@ config X86_MRST select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: -- cgit v0.10.2 From d68fb11c3dae75c8331538dcf083a65e697cc034 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:16:06 +0100 Subject: ptp: Fix clock_getres() implementation The clock_getres() function must return the resolution in the timespec argument and return 0 for success. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org Cc: Richard Cochran diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index cf3f999..10451a1 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -101,7 +101,9 @@ static s32 scaled_ppm_to_ppb(long ppm) static int ptp_clock_getres(struct posix_clock *pc, struct timespec *tp) { - return 1; /* always round timer functions to one nanosecond */ + tp->tv_sec = 0; + tp->tv_nsec = 1; + return 0; } static int ptp_clock_settime(struct posix_clock *pc, const struct timespec *tp) -- cgit v0.10.2 From c9c024b3f3e07d087974db4c0dc46217fff3a6c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:20:23 +0100 Subject: alarmtimers: Fix time comparison The expiry function compares the timer against current time and does not expire the timer when the expiry time is >= now. That's wrong. If the timer is set for now, then it must expire. Make the condition expiry > now for breaking out the loop. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index c436e79..8a46f5d 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -195,7 +195,7 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer) struct alarm *alarm; ktime_t expired = next->expires; - if (expired.tv64 >= now.tv64) + if (expired.tv64 > now.tv64) break; alarm = container_of(next, struct alarm, node); -- cgit v0.10.2 From 68bfcafaaeebdf23fba0edb4e0964bef7d08f92a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Dec 2011 15:19:00 +0800 Subject: ASoC: Include linux/io.h for jz4740 codec Include linux/io.h to fix below build errors: CC sound/soc/codecs/jz4740.o sound/soc/codecs/jz4740.c: In function 'jz4740_codec_read': sound/soc/codecs/jz4740.c:82: error: implicit declaration of function 'readl' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_write': sound/soc/codecs/jz4740.c:92: error: implicit declaration of function 'writel' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_probe': sound/soc/codecs/jz4740.c:373: error: implicit declaration of function 'ioremap' sound/soc/codecs/jz4740.c:373: warning: assignment makes pointer from integer without a cast sound/soc/codecs/jz4740.c:393: error: implicit declaration of function 'iounmap' make[3]: *** [sound/soc/codecs/jz4740.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c index e373f8f..3e1f4e1 100644 --- a/sound/soc/codecs/jz4740.c +++ b/sound/soc/codecs/jz4740.c @@ -15,6 +15,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From f8f626f537aee0da878d287e0d7694b7b76d599a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Dec 2011 15:38:51 +0800 Subject: ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC Currently SND_SOC_JZ4740_CODEC depends on SOC_JZ4740 but SOC_JZ4740 is not defined in any Kconfig. Thus the codec driver will not be built when select "Build all ASoC CODEC drivers". (Unless it is selected by SND_JZ4740_SOC_QI_LB60). Remove the dependency with SOC_JZ4740, then this code driver can be built when select "Build all ASoC CODEC drivers". Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4584514..fa787d4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -33,7 +33,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CX20442 select SND_SOC_DA7210 if I2C select SND_SOC_DFBMCS320 - select SND_SOC_JZ4740_CODEC if SOC_JZ4740 + select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C select SND_SOC_MAX98088 if I2C select SND_SOC_MAX98095 if I2C -- cgit v0.10.2 From 974c07249b06d948154be3275bf4f6e55b585300 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 2 Dec 2011 23:09:42 +0100 Subject: ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker Signed-off-by: Nicolas Pitre Acked-by: Uwe Kleine-König Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e084b7e..776d76b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. -- cgit v0.10.2 From de66a979012dbc66b1ec0125795a3f79ee667b8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 5 Dec 2011 09:39:59 +0100 Subject: ARM: 7187/1: fix unwinding for XIP kernels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf42..d1c3f3a 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3448a3f..1bdd0ad 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365..3f03fe0 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} -- cgit v0.10.2 From 6340cfed48c478cf67451ddcd2daa3438e642632 Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Mon, 28 Nov 2011 12:03:29 +0300 Subject: perf header: Use event_name() to get an event name perf_evsel.name may be not initialized Cc: David Ahern Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Arun Sharma Cc: devel@openvz.org Link: http://lkml.kernel.org/r/1322471015-107825-2-git-send-email-avagin@openvz.org Signed-off-by: Andrew Vagin Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index bcd05d0..33c17a2 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -388,7 +388,7 @@ static int write_event_desc(int fd, struct perf_header *h __used, /* * write event string as passed on cmdline */ - ret = do_write_string(fd, attr->name); + ret = do_write_string(fd, event_name(attr)); if (ret < 0) return ret; /* -- cgit v0.10.2 From f1a73746c6664442082e3d53e1804f46e1910436 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Dec 2011 13:44:06 +0100 Subject: ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: Vitaliy Kulikov Cc: [v3.1] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f365865..e035cf6 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -215,6 +215,7 @@ struct sigmatel_spec { unsigned int gpio_mute; unsigned int gpio_led; unsigned int gpio_led_polarity; + unsigned int vref_mute_led_nid; /* pin NID for mute-LED vref control */ unsigned int vref_led; /* stream */ @@ -4318,12 +4319,10 @@ static void stac_store_hints(struct hda_codec *codec) spec->eapd_switch = val; get_int_hint(codec, "gpio_led_polarity", &spec->gpio_led_polarity); if (get_int_hint(codec, "gpio_led", &spec->gpio_led)) { - if (spec->gpio_led <= 8) { - spec->gpio_mask |= spec->gpio_led; - spec->gpio_dir |= spec->gpio_led; - if (spec->gpio_led_polarity) - spec->gpio_data |= spec->gpio_led; - } + spec->gpio_mask |= spec->gpio_led; + spec->gpio_dir |= spec->gpio_led; + if (spec->gpio_led_polarity) + spec->gpio_data |= spec->gpio_led; } } @@ -4913,8 +4912,14 @@ static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity) if (sscanf(dev->name, "HP_Mute_LED_%d_%x", &spec->gpio_led_polarity, &spec->gpio_led) == 2) { - if (spec->gpio_led < 4) + unsigned int max_gpio; + max_gpio = snd_hda_param_read(codec, codec->afg, + AC_PAR_GPIO_CAP); + max_gpio &= AC_GPIO_IO_COUNT; + if (spec->gpio_led < max_gpio) spec->gpio_led = 1 << spec->gpio_led; + else + spec->vref_mute_led_nid = spec->gpio_led; return 1; } if (sscanf(dev->name, "HP_Mute_LED_%d", @@ -5043,15 +5048,12 @@ static int stac92xx_pre_resume(struct hda_codec *codec) struct sigmatel_spec *spec = codec->spec; /* sync mute LED */ - if (spec->gpio_led) { - if (spec->gpio_led <= 8) { - stac_gpio_set(codec, spec->gpio_mask, - spec->gpio_dir, spec->gpio_data); - } else { - stac_vrefout_set(codec, - spec->gpio_led, spec->vref_led); - } - } + if (spec->vref_mute_led_nid) + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); + else if (spec->gpio_led) + stac_gpio_set(codec, spec->gpio_mask, + spec->gpio_dir, spec->gpio_data); return 0; } @@ -5076,7 +5078,7 @@ static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg, struct sigmatel_spec *spec = codec->spec; if (power_state == AC_PWRST_D3) { - if (spec->gpio_led > 8) { + if (spec->vref_mute_led_nid) { /* with vref-out pin used for mute led control * codec AFG is prevented from D3 state */ @@ -5129,7 +5131,7 @@ static int stac92xx_update_led_status(struct hda_codec *codec) } } /*polarity defines *not* muted state level*/ - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { if (muted) spec->gpio_data &= ~spec->gpio_led; /* orange */ else @@ -5147,7 +5149,8 @@ static int stac92xx_update_led_status(struct hda_codec *codec) muted_lvl = spec->gpio_led_polarity ? AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ; spec->vref_led = muted ? muted_lvl : notmtd_lvl; - stac_vrefout_set(codec, spec->gpio_led, spec->vref_led); + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); } return 0; } @@ -5661,7 +5664,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; @@ -5976,7 +5979,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; -- cgit v0.10.2 From a020428364485751b607105c8f5a608f9b1fd38b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Dec 2011 13:17:23 +0100 Subject: ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea1f157..eeb25d52 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4442,7 +4442,7 @@ static int stac92xx_init(struct hda_codec *codec) /* power on when no jack detection is available */ /* or when the VREF is used for controlling LED */ if (!spec->hp_detect || - (spec->gpio_led > 8 && spec->gpio_led == nid)) { + spec->vref_mute_led_nid == nid) { stac_toggle_power_map(codec, nid, 1); continue; } -- cgit v0.10.2 From 6bd054096dce061560cee0e016e292e588dc438f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 Dec 2011 18:16:01 +0100 Subject: ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 8e9c98e..88b0941 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -640,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } -- cgit v0.10.2 From 4e2b1c4f56227c742bbd2ea8e8f559567eb80c3f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Dec 2011 13:28:22 +0000 Subject: x86/intel_mid: Kconfig select fix If we select a symbol it should have a type declared first otherwise in some situations the config tools get upset. They are currently perhaps a bit too resilient which is why this wasn't noticed initially. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111206132811.4041.32549.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5553f9f..efb4294 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -401,6 +401,9 @@ config X86_WANT_INTEL_MID if X86_WANT_INTEL_MID +config X86_INTEL_MID + bool + config X86_MRST bool "Moorestown MID platform" depends on PCI -- cgit v0.10.2 From 89e0b9a3fd66d72f2d7b7f2d6d86fa56997cde27 Mon Sep 17 00:00:00 2001 From: Sedat Dilek Date: Mon, 5 Dec 2011 23:08:32 +0100 Subject: iommu/amd: Fix typo in kernel-parameters.txt Signed-off-by: Sedat Dilek Signed-off-by: Joerg Roedel diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a0c5c5f..da50377 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -320,7 +320,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. on: enable for both 32- and 64-bit processes off: disable for both 32- and 64-bit processes - amd_iommu= [HW,X86-84] + amd_iommu= [HW,X86-64] Pass parameters to the AMD IOMMU driver in the system. Possible values are: fullflush - enable flushing of IO/TLB entries when -- cgit v0.10.2 From c29f7d457ac63311feb11928a866efd2fe153d74 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 30 Nov 2011 08:58:18 +0000 Subject: xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels The i_ino field in the VFS inode is of type unsigned long and thus can't hold the full 64-bit inode number on 32-bit kernels. We have the full inode number in the XFS inode, so use that one for nfs exports. Note that I've also switched the 32-bit file handles types to it, just to make the code more consistent and copy & paste errors less likely to happen. Reported-by: Guoquan Yang Reported-by: Hank Peng Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c index da10897..558910f 100644 --- a/fs/xfs/xfs_export.c +++ b/fs/xfs/xfs_export.c @@ -98,22 +98,22 @@ xfs_fs_encode_fh( switch (fileid_type) { case FILEID_INO32_GEN_PARENT: spin_lock(&dentry->d_lock); - fid->i32.parent_ino = dentry->d_parent->d_inode->i_ino; + fid->i32.parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid->i32.parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN: - fid->i32.ino = inode->i_ino; + fid->i32.ino = XFS_I(inode)->i_ino; fid->i32.gen = inode->i_generation; break; case FILEID_INO32_GEN_PARENT | XFS_FILEID_TYPE_64FLAG: spin_lock(&dentry->d_lock); - fid64->parent_ino = dentry->d_parent->d_inode->i_ino; + fid64->parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid64->parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG: - fid64->ino = inode->i_ino; + fid64->ino = XFS_I(inode)->i_ino; fid64->gen = inode->i_generation; break; } -- cgit v0.10.2 From a33caeb118198286309859f014c0662f3ed54ed4 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 9 Nov 2011 16:04:51 +0800 Subject: lockdep, kmemcheck: Annotate ->lock in lockdep_init_map() Since commit f59de89 ("lockdep: Clear whole lockdep_map on initialization"), lockdep_init_map() will clear all the struct. But it will break lock_set_class()/lock_set_subclass(). A typical race condition is like below: CPU A CPU B lock_set_subclass(lockA); lock_set_class(lockA); lockdep_init_map(lockA); /* lockA->name is cleared */ memset(lockA); __lock_acquire(lockA); /* lockA->class_cache[] is cleared */ register_lock_class(lockA); look_up_lock_class(lockA); WARN_ON_ONCE(class->name != lock->name); lock->name = name; So restore to what we have done before commit f59de89 but annotate ->lock with kmemcheck_mark_initialized() to suppress the kmemcheck warning reported in commit f59de89. Reported-by: Sergey Senozhatsky Reported-by: Borislav Petkov Suggested-by: Vegard Nossum Signed-off-by: Yong Zhang Cc: Tejun Heo Cc: David Rientjes Cc: Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111109080451.GB8124@zhy Signed-off-by: Ingo Molnar diff --git a/kernel/lockdep.c b/kernel/lockdep.c index e69434b..b2e08c9 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -44,6 +44,7 @@ #include #include #include +#include #include @@ -2948,7 +2949,12 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, void lockdep_init_map(struct lockdep_map *lock, const char *name, struct lock_class_key *key, int subclass) { - memset(lock, 0, sizeof(*lock)); + int i; + + kmemcheck_mark_initialized(lock, sizeof(*lock)); + + for (i = 0; i < NR_LOCKDEP_CACHING_CLASSES; i++) + lock->class_cache[i] = NULL; #ifdef CONFIG_LOCK_STAT lock->cpu = raw_smp_processor_id(); -- cgit v0.10.2 From 99b53bdd810611cc178e1a86bc112d8f4f56a1e9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?= Date: Mon, 5 Dec 2011 21:39:41 +0000 Subject: ipv4:correct description for tcp_max_syn_backlog Since commit c5ed63d66f24(tcp: fix three tcp sysctls tuning), sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask, and the minimal value is 128, and it will increase in proportion to the memory of machine. The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog are out of date. Changelog: V2: update description for sysctl_max_syn_backlog Signed-off-by: Weiping Pan Reviewed-by: Shan Wei Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f049a1c..589f2da 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER Default: 0 (off) tcp_max_syn_backlog - INTEGER - Maximal number of remembered connection requests, which are - still did not receive an acknowledgment from connecting client. - Default value is 1024 for systems with more than 128Mb of memory, - and 128 for low memory machines. If server suffers of overload, - try to increase this number. + Maximal number of remembered connection requests, which have not + received an acknowledgment from connecting client. + The minimal value is 128 for low memory machines, and it will + increase in proportion to the memory of machine. + If server suffers from overload, try increasing this number. tcp_max_tw_buckets - INTEGER Maximal number of timewait sockets held by system simultaneously. diff --git a/net/core/request_sock.c b/net/core/request_sock.c index 182236b..9b570a6 100644 --- a/net/core/request_sock.c +++ b/net/core/request_sock.c @@ -26,10 +26,11 @@ * but then some measure against one socket starving all other sockets * would be needed. * - * It was 128 by default. Experiments with real servers show, that + * The minimum value of it is 128. Experiments with real servers show that * it is absolutely not enough even at 100conn/sec. 256 cures most - * of problems. This value is adjusted to 128 for very small machines - * (<=32Mb of memory) and to 1024 on normal or better ones (>=256Mb). + * of problems. + * This value is adjusted to 128 for low memory machines, + * and it will increase in proportion to the memory of machine. * Note : Dont forget somaxconn that may limit backlog too. */ int sysctl_max_syn_backlog = 256; -- cgit v0.10.2 From 681090902eeb459a829f6f93d378a82011af3c89 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 6 Dec 2011 08:04:40 +0000 Subject: net: Silence seq_scale() unused warning On a CONFIG_NET=y build net/core/secure_seq.c:22: warning: 'seq_scale' defined but not used Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c index 025233d..925991a 100644 --- a/net/core/secure_seq.c +++ b/net/core/secure_seq.c @@ -19,6 +19,7 @@ static int __init net_secret_init(void) } late_initcall(net_secret_init); +#ifdef CONFIG_INET static u32 seq_scale(u32 seq) { /* @@ -33,6 +34,7 @@ static u32 seq_scale(u32 seq) */ return seq + (ktime_to_ns(ktime_get_real()) >> 6); } +#endif #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr, -- cgit v0.10.2 From 03fc3070457dc0e6a717a2e732af93ef1cb2ae51 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sun, 4 Dec 2011 12:26:50 +0100 Subject: batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM In case of a client roaming from node A to node B, the latter have to mark the corresponding global entry with TT_CLIENT_ROAM (instead of TT_CLIENT_PENDING). Marking a global entry with TT_CLIENT_PENDING will end up in keeping such entry forever (because this flag is only meant to be used with local entries and it is never checked on global ones). In the worst case (all the clients roaming to the same node A) the local and the global table will contain exactly the same clients. Batman-adv will continue to work, but the memory usage is duplicated. Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c7aafc7..c46b140 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -245,9 +245,11 @@ void tt_local_add(struct net_device *soft_iface, const uint8_t *addr, if (tt_global_entry) { /* This node is probably going to update its tt table */ tt_global_entry->orig_node->tt_poss_change = true; - /* The global entry has to be marked as PENDING and has to be + /* The global entry has to be marked as ROAMING and has to be * kept for consistency purpose */ - tt_global_entry->flags |= TT_CLIENT_PENDING; + tt_global_entry->flags |= TT_CLIENT_ROAM; + tt_global_entry->roam_at = jiffies; + send_roam_adv(bat_priv, tt_global_entry->addr, tt_global_entry->orig_node); } -- cgit v0.10.2 From 797399b415b78dacdbcaffdb89e46e369ec88b98 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sun, 4 Dec 2011 22:38:27 +0100 Subject: batman-adv: delete global entry in case of roaming When receiving a DEL change for a client due to a roaming event (change is marked with TT_CLIENT_ROAM), each node has to check if the client roamed to itself or somewhere else. In the latter case the global entry is kept to avoid having no route at all otherwise we can safely delete the global entry Signed-off-by: Antonio Quartulli diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c46b140..5f09a57 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -696,6 +696,7 @@ void tt_global_del(struct bat_priv *bat_priv, const char *message, bool roaming) { struct tt_global_entry *tt_global_entry = NULL; + struct tt_local_entry *tt_local_entry = NULL; tt_global_entry = tt_global_hash_find(bat_priv, addr); if (!tt_global_entry) @@ -703,15 +704,29 @@ void tt_global_del(struct bat_priv *bat_priv, if (tt_global_entry->orig_node == orig_node) { if (roaming) { - tt_global_entry->flags |= TT_CLIENT_ROAM; - tt_global_entry->roam_at = jiffies; - goto out; + /* if we are deleting a global entry due to a roam + * event, there are two possibilities: + * 1) the client roamed from node A to node B => we mark + * it with TT_CLIENT_ROAM, we start a timer and we + * wait for node B to claim it. In case of timeout + * the entry is purged. + * 2) the client roamed to us => we can directly delete + * the global entry, since it is useless now. */ + tt_local_entry = tt_local_hash_find(bat_priv, + tt_global_entry->addr); + if (!tt_local_entry) { + tt_global_entry->flags |= TT_CLIENT_ROAM; + tt_global_entry->roam_at = jiffies; + goto out; + } } _tt_global_del(bat_priv, tt_global_entry, message); } out: if (tt_global_entry) tt_global_entry_free_ref(tt_global_entry); + if (tt_local_entry) + tt_local_entry_free_ref(tt_local_entry); } void tt_global_del_orig(struct bat_priv *bat_priv, -- cgit v0.10.2 From 5bf1e97dc34bf09643815ed48be3d1761a5985e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Nov 2011 22:22:49 +0100 Subject: m68k: Wire up process_vm_{read,write}v Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 43f984e..303192f 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -350,10 +350,12 @@ #define __NR_clock_adjtime 342 #define __NR_syncfs 343 #define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 #ifdef __KERNEL__ -#define NR_syscalls 345 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c468f2e..ce827b3 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -365,4 +365,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns + .long sys_process_vm_readv /* 345 */ + .long sys_process_vm_writev -- cgit v0.10.2 From 162d12de656bc76786ba5fad6dac7bd238de9657 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 4 Dec 2011 08:38:54 +0100 Subject: ath9k: fix check for antenna diversity support fixes a regression on single-stream chips introduced in commit 43c3528430bd29f5e52438cad7cf7c0c62bf4583 "ath9k: implement .get_antenna and .set_antenna" Signed-off-by: Felix Fietkau Reported-by: Marek Lindner Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 93fbe6f..d2348a5 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -286,7 +286,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) ath_start_ani(common); } - if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) { + if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) { struct ath_hw_antcomb_conf div_ant_conf; u8 lna_conf; -- cgit v0.10.2 From 9f9c19ec1a59422c7687b11847ed3408128aa0d6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 28 Nov 2011 08:17:36 +0000 Subject: xfs: fix the logspace waiting algorithm Apply the scheme used in log_regrant_write_log_space to wake up any other threads waiting for log space before the newly added one to log_regrant_write_log_space as well, and factor the code into readable helpers. For each of the queues we have add two helpers: - one to try to wake up all waiting threads. This helper will also be usable by xfs_log_move_tail once we remove the current opportunistic wakeups in it. - one to sleep on t_wait until enough log space is available, loosely modelled after Linux waitqueues. And use them to reimplement the guts of log_regrant_write_log_space and log_regrant_write_log_space. These two function now use one and the same algorithm for waiting on log space instead of subtly different ones before, with an option to completely unify them in the near future. Also move the filesystem shutdown handling to the common caller given that we had to touch it anyway. Based on hard debugging and an earlier patch from Chandra Seetharaman . Signed-off-by: Christoph Hellwig Reviewed-by: Chandra Seetharaman Tested-by: Chandra Seetharaman Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index a14cd89..34817ad 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -150,6 +150,117 @@ xlog_grant_add_space( } while (head_val != old); } +STATIC bool +xlog_reserveq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_reserveq, t_queue) { + if (tic->t_flags & XLOG_TIC_PERM_RESERV) + need_bytes = tic->t_unit_res * tic->t_cnt; + else + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_grant_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC bool +xlog_writeq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_writeq, t_queue) { + ASSERT(tic->t_flags & XLOG_TIC_PERM_RESERV); + + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_regrant_write_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC int +xlog_reserveq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_reserveq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_grant_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); + trace_xfs_log_grant_wake(log, tic); + + spin_lock(&log->l_grant_reserve_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_reserve_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + +STATIC int +xlog_writeq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_writeq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_regrant_write_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_write_lock); + trace_xfs_log_regrant_write_wake(log, tic); + + spin_lock(&log->l_grant_write_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_write_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + static void xlog_tic_reset_res(xlog_ticket_t *tic) { @@ -350,8 +461,19 @@ xfs_log_reserve( retval = xlog_grant_log_space(log, internal_ticket); } + if (unlikely(retval)) { + /* + * If we are failing, make sure the ticket doesn't have any + * current reservations. We don't want to add this back + * when the ticket/ transaction gets cancelled. + */ + internal_ticket->t_curr_res = 0; + /* ungrant will give back unit_res * t_cnt. */ + internal_ticket->t_cnt = 0; + } + return retval; -} /* xfs_log_reserve */ +} /* @@ -2481,8 +2603,8 @@ restart: /* * Atomically get the log space required for a log ticket. * - * Once a ticket gets put onto the reserveq, it will only return after - * the needed reservation is satisfied. + * Once a ticket gets put onto the reserveq, it will only return after the + * needed reservation is satisfied. * * This function is structured so that it has a lock free fast path. This is * necessary because every new transaction reservation will come through this @@ -2490,113 +2612,53 @@ restart: * every pass. * * As tickets are only ever moved on and off the reserveq under the - * l_grant_reserve_lock, we only need to take that lock if we are going - * to add the ticket to the queue and sleep. We can avoid taking the lock if the - * ticket was never added to the reserveq because the t_queue list head will be - * empty and we hold the only reference to it so it can safely be checked - * unlocked. + * l_grant_reserve_lock, we only need to take that lock if we are going to add + * the ticket to the queue and sleep. We can avoid taking the lock if the ticket + * was never added to the reserveq because the t_queue list head will be empty + * and we hold the only reference to it so it can safely be checked unlocked. */ STATIC int -xlog_grant_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_grant_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes; - int need_bytes; + int free_bytes, need_bytes; + int error = 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("grant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_grant_enter(log, tic); + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. + */ need_bytes = tic->t_unit_res; if (tic->t_flags & XFS_LOG_PERM_RESERV) need_bytes *= tic->t_ocnt; - - /* something is already sleeping; insert new transaction at end */ - if (!list_empty_careful(&log->l_reserveq)) { - spin_lock(&log->l_grant_reserve_lock); - /* recheck the queue now we are locked */ - if (list_empty(&log->l_reserveq)) { - spin_unlock(&log->l_grant_reserve_lock); - goto redo; - } - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep1(log, tic); - - /* - * Gotta check this before going to sleep, while we're - * holding the grant lock. - */ - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - /* - * If we got an error, and the filesystem is shutting down, - * we'll catch it down below. So just continue... - */ - trace_xfs_log_grant_wake1(log, tic); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - free_bytes = xlog_space_left(log, &log->l_grant_reserve_head); - if (free_bytes < need_bytes) { + if (!list_empty_careful(&log->l_reserveq)) { spin_lock(&log->l_grant_reserve_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep2(log, tic); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - trace_xfs_log_grant_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { + if (!xlog_reserveq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_reserveq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_reserve_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_reserve_lock); - list_del_init(&tic->t_queue); + error = xlog_reserveq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_reserve_lock); } + if (error) + return error; - /* we've got enough space */ xlog_grant_add_space(log, &log->l_grant_reserve_head, need_bytes); xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_grant_exit(log, tic); xlog_verify_grant_tail(log); return 0; - -error_return_unlocked: - spin_lock(&log->l_grant_reserve_lock); -error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_reserve_lock); - trace_xfs_log_grant_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_grant_log_space */ - +} /* * Replenish the byte reservation required by moving the grant write head. @@ -2605,10 +2667,12 @@ error_return: * free fast path. */ STATIC int -xlog_regrant_write_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_regrant_write_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes, need_bytes; + int free_bytes, need_bytes; + int error = 0; tic->t_curr_res = tic->t_unit_res; xlog_tic_reset_res(tic); @@ -2616,104 +2680,38 @@ xlog_regrant_write_log_space(xlog_t *log, if (tic->t_cnt > 0) return 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("regrant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_regrant_write_enter(log, tic); - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - /* If there are other waiters on the queue then give them a - * chance at logspace before us. Wake up the first waiters, - * if we do not wake up all the waiters then go to sleep waiting - * for more free space, otherwise try to get some space for - * this transaction. + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. */ need_bytes = tic->t_unit_res; - if (!list_empty_careful(&log->l_writeq)) { - struct xlog_ticket *ntic; - - spin_lock(&log->l_grant_write_lock); - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - list_for_each_entry(ntic, &log->l_writeq, t_queue) { - ASSERT(ntic->t_flags & XLOG_TIC_PERM_RESERV); - - if (free_bytes < ntic->t_unit_res) - break; - free_bytes -= ntic->t_unit_res; - wake_up(&ntic->t_wait); - } - - if (ntic != list_first_entry(&log->l_writeq, - struct xlog_ticket, t_queue)) { - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - trace_xfs_log_regrant_write_sleep1(log, tic); - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - trace_xfs_log_regrant_write_wake1(log, tic); - } else - spin_unlock(&log->l_grant_write_lock); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - if (free_bytes < need_bytes) { + if (!list_empty_careful(&log->l_writeq)) { spin_lock(&log->l_grant_write_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - trace_xfs_log_regrant_write_sleep2(log, tic); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - - trace_xfs_log_regrant_write_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { + if (!xlog_writeq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_writeq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_write_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_write_lock); - list_del_init(&tic->t_queue); + error = xlog_writeq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_write_lock); } - /* we've got enough space */ + if (error) + return error; + xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_regrant_write_exit(log, tic); xlog_verify_grant_tail(log); return 0; - - - error_return_unlocked: - spin_lock(&log->l_grant_write_lock); - error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_write_lock); - trace_xfs_log_regrant_write_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_regrant_write_log_space */ - +} /* The first cnt-1 times through here we don't need to * move the grant write head because the permanent diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index f1d2802..4940357 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -834,18 +834,14 @@ DEFINE_LOGGRANT_EVENT(xfs_log_umount_write); DEFINE_LOGGRANT_EVENT(xfs_log_grant_enter); DEFINE_LOGGRANT_EVENT(xfs_log_grant_exit); DEFINE_LOGGRANT_EVENT(xfs_log_grant_error); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake); DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_exit); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_error); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_exit); -- cgit v0.10.2 From 02125a826459a6ad142f8d91c5b6357562f96615 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Dec 2011 08:43:34 -0500 Subject: fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen ACKed-by: John Johansen Signed-off-by: Al Viro Cc: stable@vger.kernel.org diff --git a/fs/dcache.c b/fs/dcache.c index 10ba92d..89509b5 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2439,16 +2439,14 @@ static int prepend_name(char **buffer, int *buflen, struct qstr *name) /** * prepend_path - Prepend path string to a buffer * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buffer: pointer to the end of the buffer * @buflen: pointer to buffer length * * Caller holds the rename_lock. - * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). */ -static int prepend_path(const struct path *path, struct path *root, +static int prepend_path(const struct path *path, + const struct path *root, char **buffer, int *buflen) { struct dentry *dentry = path->dentry; @@ -2483,10 +2481,10 @@ static int prepend_path(const struct path *path, struct path *root, dentry = parent; } -out: if (!error && !slash) error = prepend(buffer, buflen, "/", 1); +out: br_read_unlock(vfsmount_lock); return error; @@ -2500,15 +2498,17 @@ global_root: WARN(1, "Root dentry has weird name <%.*s>\n", (int) dentry->d_name.len, dentry->d_name.name); } - root->mnt = vfsmnt; - root->dentry = dentry; + if (!slash) + error = prepend(buffer, buflen, "/", 1); + if (!error) + error = vfsmnt->mnt_ns ? 1 : 2; goto out; } /** * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buf: buffer to return value in * @buflen: buffer length * @@ -2519,10 +2519,10 @@ global_root: * * "buflen" should be positive. * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). + * If the path is not reachable from the supplied root, return %NULL. */ -char *__d_path(const struct path *path, struct path *root, +char *__d_path(const struct path *path, + const struct path *root, char *buf, int buflen) { char *res = buf + buflen; @@ -2533,7 +2533,28 @@ char *__d_path(const struct path *path, struct path *root, error = prepend_path(path, root, &res, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) + return ERR_PTR(error); + if (error > 0) + return NULL; + return res; +} + +char *d_absolute_path(const struct path *path, + char *buf, int buflen) +{ + struct path root = {}; + char *res = buf + buflen; + int error; + + prepend(&res, &buflen, "\0", 1); + write_seqlock(&rename_lock); + error = prepend_path(path, &root, &res, &buflen); + write_sequnlock(&rename_lock); + + if (error > 1) + error = -EINVAL; + if (error < 0) return ERR_PTR(error); return res; } @@ -2541,8 +2562,9 @@ char *__d_path(const struct path *path, struct path *root, /* * same as __d_path but appends "(deleted)" for unlinked files. */ -static int path_with_deleted(const struct path *path, struct path *root, - char **buf, int *buflen) +static int path_with_deleted(const struct path *path, + const struct path *root, + char **buf, int *buflen) { prepend(buf, buflen, "\0", 1); if (d_unlinked(path->dentry)) { @@ -2579,7 +2601,6 @@ char *d_path(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; /* @@ -2594,9 +2615,8 @@ char *d_path(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (error) + error = path_with_deleted(path, &root, &res, &buflen); + if (error < 0) res = ERR_PTR(error); write_sequnlock(&rename_lock); path_put(&root); @@ -2617,7 +2637,6 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; if (path->dentry->d_op && path->dentry->d_op->d_dname) @@ -2625,9 +2644,8 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (!error && !path_equal(&tmp, &root)) + error = path_with_deleted(path, &root, &res, &buflen); + if (error > 0) error = prepend_unreachable(&res, &buflen); write_sequnlock(&rename_lock); path_put(&root); @@ -2758,19 +2776,18 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size) write_seqlock(&rename_lock); if (!d_unlinked(pwd.dentry)) { unsigned long len; - struct path tmp = root; char *cwd = page + PAGE_SIZE; int buflen = PAGE_SIZE; prepend(&cwd, &buflen, "\0", 1); - error = prepend_path(&pwd, &tmp, &cwd, &buflen); + error = prepend_path(&pwd, &root, &cwd, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) goto out; /* Unreachable from current root */ - if (!path_equal(&tmp, &root)) { + if (error > 0) { error = prepend_unreachable(&cwd, &buflen); if (error) goto out; diff --git a/fs/namespace.c b/fs/namespace.c index 6d3a196..cfc6d44 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1048,15 +1048,12 @@ static int show_mountinfo(struct seq_file *m, void *v) if (err) goto out; seq_putc(m, ' '); - seq_path_root(m, &mnt_path, &root, " \t\n\\"); - if (root.mnt != p->root.mnt || root.dentry != p->root.dentry) { - /* - * Mountpoint is outside root, discard that one. Ugly, - * but less so than trying to do that in iterator in a - * race-free way (due to renames). - */ - return SEQ_SKIP; - } + + /* mountpoints outside of chroot jail will give SEQ_SKIP on this */ + err = seq_path_root(m, &mnt_path, &root, " \t\n\\"); + if (err) + goto out; + seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw"); show_mnt_opts(m, mnt); @@ -2776,3 +2773,8 @@ void kern_unmount(struct vfsmount *mnt) } } EXPORT_SYMBOL(kern_unmount); + +bool our_mnt(struct vfsmount *mnt) +{ + return check_mnt(mnt); +} diff --git a/fs/seq_file.c b/fs/seq_file.c index 05d6b0e..dba43c3 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -449,8 +449,6 @@ EXPORT_SYMBOL(seq_path); /* * Same as seq_path, but relative to supplied root. - * - * root may be changed, see __d_path(). */ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *esc) @@ -463,6 +461,8 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *p; p = __d_path(path, root, buf, size); + if (!p) + return SEQ_SKIP; res = PTR_ERR(p); if (!IS_ERR(p)) { char *end = mangle_path(buf, p, esc); @@ -474,7 +474,7 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, } seq_commit(m, res); - return res < 0 ? res : 0; + return res < 0 && res != -ENAMETOOLONG ? res : 0; } /* diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4df9261..ed9f74f 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -339,7 +339,8 @@ extern int d_validate(struct dentry *, struct dentry *); */ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); -extern char *__d_path(const struct path *path, struct path *root, char *, int); +extern char *__d_path(const struct path *, const struct path *, char *, int); +extern char *d_absolute_path(const struct path *, char *, int); extern char *d_path(const struct path *, char *, int); extern char *d_path_with_unreachable(const struct path *, char *, int); extern char *dentry_path_raw(struct dentry *, char *, int); diff --git a/include/linux/fs.h b/include/linux/fs.h index e313022..019dc55 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1942,6 +1942,7 @@ extern int fd_statfs(int, struct kstatfs *); extern int statfs_by_dentry(struct dentry *, struct kstatfs *); extern int freeze_super(struct super_block *super); extern int thaw_super(struct super_block *super); +extern bool our_mnt(struct vfsmount *mnt); extern int current_umask(void); diff --git a/security/apparmor/path.c b/security/apparmor/path.c index 36cc0cc..b566eba 100644 --- a/security/apparmor/path.c +++ b/security/apparmor/path.c @@ -57,23 +57,44 @@ static int prepend(char **buffer, int buflen, const char *str, int namelen) static int d_namespace_path(struct path *path, char *buf, int buflen, char **name, int flags) { - struct path root, tmp; char *res; - int connected, error = 0; + int error = 0; + int connected = 1; + + if (path->mnt->mnt_flags & MNT_INTERNAL) { + /* it's not mounted anywhere */ + res = dentry_path(path->dentry, buf, buflen); + *name = res; + if (IS_ERR(res)) { + *name = buf; + return PTR_ERR(res); + } + if (path->dentry->d_sb->s_magic == PROC_SUPER_MAGIC && + strncmp(*name, "/sys/", 5) == 0) { + /* TODO: convert over to using a per namespace + * control instead of hard coded /proc + */ + return prepend(name, *name - buf, "/proc", 5); + } + return 0; + } - /* Get the root we want to resolve too, released below */ + /* resolve paths relative to chroot?*/ if (flags & PATH_CHROOT_REL) { - /* resolve paths relative to chroot */ + struct path root; get_fs_root(current->fs, &root); - } else { - /* resolve paths relative to namespace */ - root.mnt = current->nsproxy->mnt_ns->root; - root.dentry = root.mnt->mnt_root; - path_get(&root); + res = __d_path(path, &root, buf, buflen); + if (res && !IS_ERR(res)) { + /* everything's fine */ + *name = res; + path_put(&root); + goto ok; + } + path_put(&root); + connected = 0; } - tmp = root; - res = __d_path(path, &tmp, buf, buflen); + res = d_absolute_path(path, buf, buflen); *name = res; /* handle error conditions - and still allow a partial path to @@ -84,7 +105,10 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, *name = buf; goto out; } + if (!our_mnt(path->mnt)) + connected = 0; +ok: /* Handle two cases: * 1. A deleted dentry && profile is not allowing mediation of deleted * 2. On some filesystems, newly allocated dentries appear to the @@ -97,10 +121,7 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, goto out; } - /* Determine if the path is connected to the expected root */ - connected = tmp.dentry == root.dentry && tmp.mnt == root.mnt; - - /* If the path is not connected, + /* If the path is not connected to the expected root, * check if it is a sysctl and handle specially else remove any * leading / that __d_path may have returned. * Unless @@ -112,17 +133,9 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, * namespace root. */ if (!connected) { - /* is the disconnect path a sysctl? */ - if (tmp.dentry->d_sb->s_magic == PROC_SUPER_MAGIC && - strncmp(*name, "/sys/", 5) == 0) { - /* TODO: convert over to using a per namespace - * control instead of hard coded /proc - */ - error = prepend(name, *name - buf, "/proc", 5); - } else if (!(flags & PATH_CONNECT_PATH) && + if (!(flags & PATH_CONNECT_PATH) && !(((flags & CHROOT_NSCONNECT) == CHROOT_NSCONNECT) && - (tmp.mnt == current->nsproxy->mnt_ns->root && - tmp.dentry == tmp.mnt->mnt_root))) { + our_mnt(path->mnt))) { /* disconnected path, don't return pathname starting * with '/' */ @@ -133,8 +146,6 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, } out: - path_put(&root); - return error; } diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 738bbdf..36fa7c9 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -101,9 +101,8 @@ static char *tomoyo_get_absolute_path(struct path *path, char * const buffer, { char *pos = ERR_PTR(-ENOMEM); if (buflen >= 256) { - struct path ns_root = { }; /* go to whatever namespace root we are under */ - pos = __d_path(path, &ns_root, buffer, buflen - 1); + pos = d_absolute_path(path, buffer, buflen - 1); if (!IS_ERR(pos) && *pos == '/' && pos[1]) { struct inode *inode = path->dentry->d_inode; if (inode && S_ISDIR(inode->i_mode)) { -- cgit v0.10.2 From dc87cd5c264cb587f16459285565830689ecf7a7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Dec 2011 18:15:27 -0500 Subject: drm/radeon/kms: fix return type for radeon_encoder_get_dp_bridge_encoder_id Seems like something got mis-merged here. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 06e413e..4b27efa 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,13 +233,12 @@ u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder) switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_TRAVIS: case ENCODER_OBJECT_ID_NUTMEG: - return true; + return radeon_encoder->encoder_id; default: - return false; + return ENCODER_OBJECT_ID_NONE; } } - - return false; + return ENCODER_OBJECT_ID_NONE; } void radeon_panel_mode_fixup(struct drm_encoder *encoder, -- cgit v0.10.2 From eb1711bb94991e93669c5a1b5f84f11be2d51ea1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 6 Dec 2011 12:12:33 +0100 Subject: drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a The recursion loop goes retire_requests->unbind->gpu_idle->retire_reqeusts. Every time we go through this we need a - active object that can be retired - and there are no other references to that object than the one from the active list, so that it gets unbound and freed immediately. Otherwise the recursion stops. So the recursion is only limited by the number of objects that fit these requirements sitting in the active list any time retire_request is called. Issue exercised by tests/gem_unref_active_buffers from i-g-t. There's been a decent bikeshed discussion whether it wouldn't be better to pass around a flag, but imo this is o.k. for such a limited case that only supports a w/a. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180 Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson [ickle- we built better bikesheds, but this keeps the rain off for now] Tested-by: Dave Airlie Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8359dc7..60ff1b6 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2026,8 +2026,13 @@ i915_wait_request(struct intel_ring_buffer *ring, * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. + * + * To avoid a recursion with the ilk VT-d workaround (that calls + * gpu_idle when unbinding objects with interruptible==false) don't + * retire requests in that case (because it might call unbind if the + * active list holds the last reference to the object). */ - if (ret == 0) + if (ret == 0 && dev_priv->mm.interruptible) i915_gem_retire_requests_ring(ring); return ret; -- cgit v0.10.2 From 24bb5a0ce39c51a2e2602c947f218a19e4b26d7d Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 29 Nov 2011 22:08:00 +0100 Subject: vmwgfx: Use kcalloc instead of kzalloc to allocate array The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 3f63435..5ff561d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -140,7 +140,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; @@ -232,7 +232,7 @@ int vmw_present_readback_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; -- cgit v0.10.2 From 86b47c25494b824da655b95f6fdb4fdb3f17aa77 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 22 Nov 2011 16:08:21 +0200 Subject: perf: Do no try to schedule task events if there are none perf_event_sched_in() shouldn't try to schedule task events if there are none otherwise task's ctx->is_active will be set and will not be cleared during sched_out. This will prevent newly added events from being scheduled into the task context. Fixes a boo-boo in commit 1d5f003f5a9 ("perf: Do not set task_ctx pointer in cpuctx if there are no events in the context"). Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111122140821.GF2557@redhat.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index 600c162..d3b9df5 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2174,11 +2174,11 @@ static void perf_event_context_sched_in(struct perf_event_context *ctx, */ cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE); - perf_event_sched_in(cpuctx, ctx, task); - if (ctx->nr_events) cpuctx->task_ctx = ctx; + perf_event_sched_in(cpuctx, cpuctx->task_ctx, task); + perf_pmu_enable(ctx->pmu); perf_ctx_unlock(cpuctx, ctx); -- cgit v0.10.2 From 68264d2a081f4032804adedb9ed9a680f7dade7e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 7 Dec 2011 17:44:47 +0800 Subject: ASoC: Fix a typo in jive_wm8750 Fix a typo in jive_wm8750 that introduces below build error. Also removes an unused err variable. CC sound/soc/samsung/jive_wm8750.o sound/soc/samsung/jive_wm8750.c: In function 'jive_wm8750_init': sound/soc/samsung/jive_wm8750.c:104: warning: unused variable 'err' sound/soc/samsung/jive_wm8750.c: At top level: sound/soc/samsung/jive_wm8750.c:134: error: unknown field 'dapm_widgtets' specified in initializer sound/soc/samsung/jive_wm8750.c:134: warning: initialization from incompatible pointer type make[3]: *** [sound/soc/samsung/jive_wm8750.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c index 1826acf..8e523fd 100644 --- a/sound/soc/samsung/jive_wm8750.c +++ b/sound/soc/samsung/jive_wm8750.c @@ -101,7 +101,6 @@ static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; struct snd_soc_dapm_context *dapm = &codec->dapm; - int err; /* These endpoints are not being used. */ snd_soc_dapm_nc_pin(dapm, "LINPUT2"); @@ -131,7 +130,7 @@ static struct snd_soc_card snd_soc_machine_jive = { .dai_link = &jive_dai, .num_links = 1, - .dapm_widgtets = wm8750_dapm_widgets, + .dapm_widgets = wm8750_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), -- cgit v0.10.2 From 974edd30beafdb136cdfc6839a143e23c826dc89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 7 Dec 2011 17:52:19 +0800 Subject: ASoC: Include linux/module.h for smdk2443_wm9710 Include linux/module.h to fix below build error: CC sound/soc/samsung/smdk2443_wm9710.o sound/soc/samsung/smdk2443_wm9710.c:64: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:64: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:64: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' sound/soc/samsung/smdk2443_wm9710.c:64: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:65: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:65: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:65: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk2443_wm9710.c:65: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:66: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:66: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:66: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' sound/soc/samsung/smdk2443_wm9710.c:66: warning: function declaration isn't a prototype make[3]: *** [sound/soc/samsung/smdk2443_wm9710.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c index 3a0dbfc..8bd1dc5 100644 --- a/sound/soc/samsung/smdk2443_wm9710.c +++ b/sound/soc/samsung/smdk2443_wm9710.c @@ -12,6 +12,7 @@ * */ +#include #include static struct snd_soc_card smdk2443; -- cgit v0.10.2 From 766ddee68bf1e4cc2cdcf73b34d243cf6e6f8ab0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 16:55:19 +0100 Subject: ALSA: hda/realtek - Don't create extra controls with channel suffix The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a7d1bc4..96f5da9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3173,7 +3173,8 @@ static int alc_auto_create_multi_out_ctls(struct hda_codec *codec, } static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, - hda_nid_t dac, const char *pfx) + hda_nid_t dac, const char *pfx, + int cidx) { struct alc_spec *spec = codec->spec; hda_nid_t sw, vol; @@ -3189,15 +3190,15 @@ static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, if (is_ctl_used(spec->sw_ctls, val)) return 0; /* already created */ mark_ctl_usage(spec->sw_ctls, val); - return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val); + return __add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, cidx, val); } sw = alc_look_for_out_mute_nid(codec, pin, dac); vol = alc_look_for_out_vol_nid(codec, pin, dac); - err = alc_auto_add_stereo_vol(codec, pfx, 0, vol); + err = alc_auto_add_stereo_vol(codec, pfx, cidx, vol); if (err < 0) return err; - err = alc_auto_add_stereo_sw(codec, pfx, 0, sw); + err = alc_auto_add_stereo_sw(codec, pfx, cidx, sw); if (err < 0) return err; return 0; @@ -3238,16 +3239,21 @@ static int alc_auto_create_extra_outs(struct hda_codec *codec, int num_pins, hda_nid_t dac = *dacs; if (!dac) dac = spec->multiout.dac_nids[0]; - return alc_auto_create_extra_out(codec, *pins, dac, pfx); + return alc_auto_create_extra_out(codec, *pins, dac, pfx, 0); } if (dacs[num_pins - 1]) { /* OK, we have a multi-output system with individual volumes */ for (i = 0; i < num_pins; i++) { - snprintf(name, sizeof(name), "%s %s", - pfx, channel_name[i]); - err = alc_auto_create_extra_out(codec, pins[i], dacs[i], - name); + if (num_pins >= 3) { + snprintf(name, sizeof(name), "%s %s", + pfx, channel_name[i]); + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + name, 0); + } else { + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + pfx, i); + } if (err < 0) return err; } -- cgit v0.10.2 From fbabc24619f7298626265a3f973786b471b8c29d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:14:20 +0100 Subject: ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 96f5da9..214d4f9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2631,6 +2631,8 @@ static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch, case AUTO_PIN_SPEAKER_OUT: if (cfg->line_outs == 1) return "Speaker"; + if (cfg->line_outs == 2) + return ch ? "Bass Speaker" : "Speaker"; break; case AUTO_PIN_HP_OUT: /* for multi-io case, only the primary out */ -- cgit v0.10.2 From 0a34b42b6245ccc710be6759cded5b7fe41ea1f9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:20:30 +0100 Subject: ALSA: hda/realtek - Fix lost speaker volume controls When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 214d4f9..1d07e8f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2906,7 +2906,7 @@ static hda_nid_t alc_auto_look_for_dac(struct hda_codec *codec, hda_nid_t pin) if (!nid) continue; if (found_in_nid_list(nid, spec->multiout.dac_nids, - spec->multiout.num_dacs)) + ARRAY_SIZE(spec->private_dac_nids))) continue; if (found_in_nid_list(nid, spec->multiout.hp_out_nid, ARRAY_SIZE(spec->multiout.hp_out_nid))) @@ -2927,6 +2927,7 @@ static hda_nid_t get_dac_if_single(struct hda_codec *codec, hda_nid_t pin) return 0; } +/* return 0 if no possible DAC is found, 1 if one or more found */ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, const hda_nid_t *pins, hda_nid_t *dacs) { @@ -2944,7 +2945,7 @@ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, if (!dacs[i]) dacs[i] = alc_auto_look_for_dac(codec, pins[i]); } - return 0; + return 1; } static int alc_auto_fill_multi_ios(struct hda_codec *codec, @@ -2954,7 +2955,7 @@ static int alc_auto_fill_multi_ios(struct hda_codec *codec, static int alc_auto_fill_dac_nids(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - const struct auto_pin_cfg *cfg = &spec->autocfg; + struct auto_pin_cfg *cfg = &spec->autocfg; bool redone = false; int i; @@ -2965,6 +2966,7 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) spec->multiout.extra_out_nid[0] = 0; memset(spec->private_dac_nids, 0, sizeof(spec->private_dac_nids)); spec->multiout.dac_nids = spec->private_dac_nids; + spec->multi_ios = 0; /* fill hard-wired DACs first */ if (!redone) { @@ -2998,10 +3000,12 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) for (i = 0; i < cfg->line_outs; i++) { if (spec->private_dac_nids[i]) spec->multiout.num_dacs++; - else + else { memmove(spec->private_dac_nids + i, spec->private_dac_nids + i + 1, sizeof(hda_nid_t) * (cfg->line_outs - i - 1)); + spec->private_dac_nids[cfg->line_outs - 1] = 0; + } } if (cfg->line_outs == 1 && cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { @@ -3023,9 +3027,28 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) if (cfg->line_out_type != AUTO_PIN_HP_OUT) alc_auto_fill_extra_dacs(codec, cfg->hp_outs, cfg->hp_pins, spec->multiout.hp_out_nid); - if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) - alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, cfg->speaker_pins, - spec->multiout.extra_out_nid); + if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { + int err = alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, + cfg->speaker_pins, + spec->multiout.extra_out_nid); + /* if no speaker volume is assigned, try again as the primary + * output + */ + if (!err && cfg->speaker_outs > 0 && + cfg->line_out_type == AUTO_PIN_HP_OUT) { + cfg->hp_outs = cfg->line_outs; + memcpy(cfg->hp_pins, cfg->line_out_pins, + sizeof(cfg->hp_pins)); + cfg->line_outs = cfg->speaker_outs; + memcpy(cfg->line_out_pins, cfg->speaker_pins, + sizeof(cfg->speaker_pins)); + cfg->speaker_outs = 0; + memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins)); + cfg->line_out_type = AUTO_PIN_SPEAKER_OUT; + redone = false; + goto again; + } + } return 0; } -- cgit v0.10.2 From 77a7300abad7fe01891b400e88d746f97307ee5a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 7 Dec 2011 03:16:26 +0400 Subject: of/irq: Get rid of NO_IRQ usage PPC32/64 defines NO_IRQ to zero, so no problems expected. ARM defines NO_IRQ to -1, but OF code relies on IRQ domains support, which returns correct ('0') value in 'no irq' case. So everything should be fine. Other arches might break if some of their OF drivers rely on NO_IRQ being not 0. If so, the drivers must be fixed, finally. [ Rob Herring points out that microblaze should be fixed, and has posted a patch for testing for that. - Linus ] Signed-off-by: Anton Vorontsov Acked-by: Wolfram Sang Signed-off-by: Linus Torvalds diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 19c0115..0f0cfa3 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -26,11 +26,6 @@ #include #include -/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */ -#ifndef NO_IRQ -#define NO_IRQ 0 -#endif - /** * irq_of_parse_and_map - Parse and map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped @@ -44,7 +39,7 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) struct of_irq oirq; if (of_irq_map_one(dev, index, &oirq)) - return NO_IRQ; + return 0; return irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); @@ -345,7 +340,7 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) /* Only dereference the resource if both the * resource and the irq are valid. */ - if (r && irq != NO_IRQ) { + if (r && irq) { r->start = r->end = irq; r->flags = IORESOURCE_IRQ; r->name = dev->full_name; @@ -363,7 +358,7 @@ int of_irq_count(struct device_node *dev) { int nr = 0; - while (of_irq_to_resource(dev, nr, NULL) != NO_IRQ) + while (of_irq_to_resource(dev, nr, NULL)) nr++; return nr; @@ -383,7 +378,7 @@ int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int i; for (i = 0; i < nr_irqs; i++, res++) - if (of_irq_to_resource(dev, i, res) == NO_IRQ) + if (!of_irq_to_resource(dev, i, res)) break; return i; -- cgit v0.10.2 From 43af940c54d712ab5e6d6798a82498b25c2af299 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 05:01:15 +0000 Subject: net/fec: fix the use of pdev->id The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 1124ce0..c136230 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -232,6 +232,7 @@ struct fec_enet_private { struct platform_device *pdev; int opened; + int dev_id; /* Phylib and MDIO interface */ struct mii_bus *mii_bus; @@ -837,7 +838,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev) /* Adjust MAC if using macaddr */ if (iap == macaddr) - ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id; + ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id; } /* ------------------------------------------------------------------------- */ @@ -953,7 +954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) char mdio_bus_id[MII_BUS_ID_SIZE]; char phy_name[MII_BUS_ID_SIZE + 3]; int phy_id; - int dev_id = fep->pdev->id; + int dev_id = fep->dev_id; fep->phy_dev = NULL; @@ -1031,7 +1032,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) * mdio interface in board design, and need to be configured by * fec0 mii_bus. */ - if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) { + if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) { /* fec1 uses fec0 mii_bus */ fep->mii_bus = fec0_mii_bus; return 0; @@ -1063,7 +1064,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) fep->mii_bus->read = fec_enet_mdio_read; fep->mii_bus->write = fec_enet_mdio_write; fep->mii_bus->reset = fec_enet_mdio_reset; - snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1); + snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", fep->dev_id + 1); fep->mii_bus->priv = fep; fep->mii_bus->parent = &pdev->dev; @@ -1521,6 +1522,7 @@ fec_probe(struct platform_device *pdev) int i, irq, ret = 0; struct resource *r; const struct of_device_id *of_id; + static int dev_id; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1548,6 +1550,7 @@ fec_probe(struct platform_device *pdev) fep->hwp = ioremap(r->start, resource_size(r)); fep->pdev = pdev; + fep->dev_id = dev_id++; if (!fep->hwp) { ret = -ENOMEM; -- cgit v0.10.2 From a454daceb78844a09c08b6e2d8badcb76a5d73b9 Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Tue, 6 Dec 2011 15:47:12 +0000 Subject: ppp: fix pptp double release_sock in pptp_bind() Signed-off-by: Djalal Harouni Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 89f829f..f8a6853 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -423,10 +423,8 @@ static int pptp_bind(struct socket *sock, struct sockaddr *uservaddr, lock_sock(sk); opt->src_addr = sp->sa_addr.pptp; - if (add_chan(po)) { - release_sock(sk); + if (add_chan(po)) error = -EBUSY; - } release_sock(sk); return error; -- cgit v0.10.2 From 81e759fbf7715514c32e563789db1d9d47fd55fb Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Tue, 15 Nov 2011 14:49:53 -0800 Subject: rbd: return an error when an invalid header is read This protects against opening future rbd images that have incompatible format changes. Signed-off-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 65cc424..a828c6a 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -461,6 +461,10 @@ static int rbd_header_from_disk(struct rbd_image_header *header, u32 snap_count = le32_to_cpu(ondisk->snap_count); int ret = -ENOMEM; + if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) { + return -ENXIO; + } + init_rwsem(&header->snap_rwsem); header->snap_names_len = le64_to_cpu(ondisk->snap_names_len); header->snapc = kmalloc(sizeof(struct ceph_snap_context) + @@ -1610,8 +1614,13 @@ static int rbd_read_header(struct rbd_device *rbd_dev, goto out_dh; rc = rbd_header_from_disk(header, dh, snap_count, GFP_KERNEL); - if (rc < 0) + if (rc < 0) { + if (rc == -ENXIO) { + pr_warning("unrecognized header format" + " for image %s", rbd_dev->obj); + } goto out_dh; + } if (snap_count != header->total_snaps) { snap_count = header->total_snaps; -- cgit v0.10.2 From 51703306b3b9ea7c05728040998521e47358147b Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Mon, 24 Oct 2011 16:28:27 -0700 Subject: rbd: remove buggy rollback functionality This doesn't interact with resizing well, since it doesn't set the size of the device to the size at the snapshot. It's also an expensive operation to be synchronous. Rollback can still be done with the userspace rbd tool. Signed-off-by: Josh Durgin diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index fa72ccb..dbedafb 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -57,13 +57,6 @@ create_snap $ echo > /sys/bus/rbd/devices//snap_create -rollback_snap - - Rolls back data to the specified snapshot. This goes over the entire - list of rados blocks and sends a rollback command to each. - - $ echo > /sys/bus/rbd/devices//snap_rollback - snap_* A directory per each snapshot diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a828c6a..148ab94 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -183,10 +183,6 @@ static LIST_HEAD(rbd_client_list); /* clients */ static int __rbd_init_snaps_header(struct rbd_device *rbd_dev); static void rbd_dev_release(struct device *dev); -static ssize_t rbd_snap_rollback(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t size); static ssize_t rbd_snap_add(struct device *dev, struct device_attribute *attr, const char *buf, @@ -1360,32 +1356,6 @@ fail: } /* - * Request sync osd rollback - */ -static int rbd_req_sync_rollback_obj(struct rbd_device *dev, - u64 snapid, - const char *obj) -{ - struct ceph_osd_req_op *ops; - int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_ROLLBACK, 0); - if (ret < 0) - return ret; - - ops[0].snap.snapid = snapid; - - ret = rbd_req_sync_op(dev, NULL, - CEPH_NOSNAP, - 0, - CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK, - ops, - 1, obj, 0, 0, NULL, NULL, NULL); - - rbd_destroy_ops(ops); - - return ret; -} - -/* * Request sync osd read */ static int rbd_req_sync_exec(struct rbd_device *dev, @@ -1891,7 +1861,6 @@ static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL); static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh); static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL); static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add); -static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback); static struct attribute *rbd_attrs[] = { &dev_attr_size.attr, @@ -1902,7 +1871,6 @@ static struct attribute *rbd_attrs[] = { &dev_attr_current_snap.attr, &dev_attr_refresh.attr, &dev_attr_create_snap.attr, - &dev_attr_rollback_snap.attr, NULL }; @@ -2433,64 +2401,6 @@ err_unlock: return ret; } -static ssize_t rbd_snap_rollback(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - struct rbd_device *rbd_dev = dev_to_rbd(dev); - int ret; - u64 snapid; - u64 cur_ofs; - char *seg_name = NULL; - char *snap_name = kmalloc(count + 1, GFP_KERNEL); - ret = -ENOMEM; - if (!snap_name) - return ret; - - /* parse snaps add command */ - snprintf(snap_name, count, "%s", buf); - seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO); - if (!seg_name) - goto done; - - mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); - - ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL); - if (ret < 0) - goto done_unlock; - - dout("snapid=%lld\n", snapid); - - cur_ofs = 0; - while (cur_ofs < rbd_dev->header.image_size) { - cur_ofs += rbd_get_segment(&rbd_dev->header, - rbd_dev->obj, - cur_ofs, (u64)-1, - seg_name, NULL); - dout("seg_name=%s\n", seg_name); - - ret = rbd_req_sync_rollback_obj(rbd_dev, snapid, seg_name); - if (ret < 0) - pr_warning("could not roll back obj %s err=%d\n", - seg_name, ret); - } - - ret = __rbd_update_snaps(rbd_dev); - if (ret < 0) - goto done_unlock; - - ret = count; - -done_unlock: - mutex_unlock(&ctl_mutex); -done: - kfree(seg_name); - kfree(snap_name); - - return ret; -} - static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), __ATTR(remove, S_IWUSR, NULL, rbd_remove), -- cgit v0.10.2 From be655596b3de5873f994ddbe205751a5ffb4de39 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 30 Nov 2011 09:47:09 -0800 Subject: ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott Signed-off-by: Sage Weil diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 4144caf..173b1d2 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -87,7 +87,7 @@ static int ceph_set_page_dirty(struct page *page) snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context); /* dirty the head */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_head_snapc == NULL) ci->i_head_snapc = ceph_get_snap_context(snapc); ++ci->i_wrbuffer_ref_head; @@ -100,7 +100,7 @@ static int ceph_set_page_dirty(struct page *page) ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref_head-1, ci->i_wrbuffer_ref, ci->i_wrbuffer_ref_head, snapc, snapc->seq, snapc->num_snaps); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* now adjust page */ spin_lock_irq(&mapping->tree_lock); @@ -391,7 +391,7 @@ static struct ceph_snap_context *get_oldest_context(struct inode *inode, struct ceph_snap_context *snapc = NULL; struct ceph_cap_snap *capsnap = NULL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) { dout(" cap_snap %p snapc %p has %d dirty pages\n", capsnap, capsnap->context, capsnap->dirty_pages); @@ -407,7 +407,7 @@ static struct ceph_snap_context *get_oldest_context(struct inode *inode, dout(" head snapc %p has %d dirty pages\n", snapc, ci->i_wrbuffer_ref_head); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return snapc; } diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 0f327c6..8b53193 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -309,7 +309,7 @@ void ceph_reservation_status(struct ceph_fs_client *fsc, /* * Find ceph_cap for given mds, if any. * - * Called with i_lock held. + * Called with i_ceph_lock held. */ static struct ceph_cap *__get_cap_for_mds(struct ceph_inode_info *ci, int mds) { @@ -332,9 +332,9 @@ struct ceph_cap *ceph_get_cap_for_mds(struct ceph_inode_info *ci, int mds) { struct ceph_cap *cap; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ci, mds); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return cap; } @@ -361,15 +361,16 @@ static int __ceph_get_cap_mds(struct ceph_inode_info *ci) int ceph_get_cap_mds(struct inode *inode) { + struct ceph_inode_info *ci = ceph_inode(inode); int mds; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); mds = __ceph_get_cap_mds(ceph_inode(inode)); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return mds; } /* - * Called under i_lock. + * Called under i_ceph_lock. */ static void __insert_cap_node(struct ceph_inode_info *ci, struct ceph_cap *new) @@ -415,7 +416,7 @@ static void __cap_set_timeouts(struct ceph_mds_client *mdsc, * * If I_FLUSH is set, leave the inode at the front of the list. * - * Caller holds i_lock + * Caller holds i_ceph_lock * -> we take mdsc->cap_delay_lock */ static void __cap_delay_requeue(struct ceph_mds_client *mdsc, @@ -457,7 +458,7 @@ static void __cap_delay_requeue_front(struct ceph_mds_client *mdsc, /* * Cancel delayed work on cap. * - * Caller must hold i_lock. + * Caller must hold i_ceph_lock. */ static void __cap_delay_cancel(struct ceph_mds_client *mdsc, struct ceph_inode_info *ci) @@ -532,14 +533,14 @@ int ceph_add_cap(struct inode *inode, wanted |= ceph_caps_for_mode(fmode); retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ci, mds); if (!cap) { if (new_cap) { cap = new_cap; new_cap = NULL; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); new_cap = get_cap(mdsc, caps_reservation); if (new_cap == NULL) return -ENOMEM; @@ -625,7 +626,7 @@ retry: if (fmode >= 0) __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); wake_up_all(&ci->i_cap_wq); return 0; } @@ -792,7 +793,7 @@ int ceph_caps_revoking(struct ceph_inode_info *ci, int mask) struct rb_node *p; int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) { cap = rb_entry(p, struct ceph_cap, ci_node); if (__cap_is_valid(cap) && @@ -801,7 +802,7 @@ int ceph_caps_revoking(struct ceph_inode_info *ci, int mask) break; } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("ceph_caps_revoking %p %s = %d\n", inode, ceph_cap_string(mask), ret); return ret; @@ -855,7 +856,7 @@ int __ceph_caps_mds_wanted(struct ceph_inode_info *ci) } /* - * called under i_lock + * called under i_ceph_lock */ static int __ceph_is_any_caps(struct ceph_inode_info *ci) { @@ -865,7 +866,7 @@ static int __ceph_is_any_caps(struct ceph_inode_info *ci) /* * Remove a cap. Take steps to deal with a racing iterate_session_caps. * - * caller should hold i_lock. + * caller should hold i_ceph_lock. * caller will not hold session s_mutex if called from destroy_inode. */ void __ceph_remove_cap(struct ceph_cap *cap) @@ -1028,7 +1029,7 @@ static void __queue_cap_release(struct ceph_mds_session *session, /* * Queue cap releases when an inode is dropped from our cache. Since - * inode is about to be destroyed, there is no need for i_lock. + * inode is about to be destroyed, there is no need for i_ceph_lock. */ void ceph_queue_caps_release(struct inode *inode) { @@ -1049,7 +1050,7 @@ void ceph_queue_caps_release(struct inode *inode) /* * Send a cap msg on the given inode. Update our caps state, then - * drop i_lock and send the message. + * drop i_ceph_lock and send the message. * * Make note of max_size reported/requested from mds, revoked caps * that have now been implemented. @@ -1061,13 +1062,13 @@ void ceph_queue_caps_release(struct inode *inode) * Return non-zero if delayed release, or we experienced an error * such that the caller should requeue + retry later. * - * called with i_lock, then drops it. + * called with i_ceph_lock, then drops it. * caller should hold snap_rwsem (read), s_mutex. */ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, int op, int used, int want, int retain, int flushing, unsigned *pflush_tid) - __releases(cap->ci->vfs_inode->i_lock) + __releases(cap->ci->i_ceph_lock) { struct ceph_inode_info *ci = cap->ci; struct inode *inode = &ci->vfs_inode; @@ -1170,7 +1171,7 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, xattr_version = ci->i_xattrs.version; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ret = send_cap_msg(session, ceph_vino(inode).ino, cap_id, op, keep, want, flushing, seq, flush_tid, issue_seq, mseq, @@ -1198,13 +1199,13 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, * Unless @again is true, skip cap_snaps that were already sent to * the MDS (i.e., during this session). * - * Called under i_lock. Takes s_mutex as needed. + * Called under i_ceph_lock. Takes s_mutex as needed. */ void __ceph_flush_snaps(struct ceph_inode_info *ci, struct ceph_mds_session **psession, int again) - __releases(ci->vfs_inode->i_lock) - __acquires(ci->vfs_inode->i_lock) + __releases(ci->i_ceph_lock) + __acquires(ci->i_ceph_lock) { struct inode *inode = &ci->vfs_inode; int mds; @@ -1261,7 +1262,7 @@ retry: session = NULL; } if (!session) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); mutex_lock(&mdsc->mutex); session = __ceph_lookup_mds_session(mdsc, mds); mutex_unlock(&mdsc->mutex); @@ -1275,7 +1276,7 @@ retry: * deletion or migration. retry, and we'll * get a better @mds value next time. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); goto retry; } @@ -1285,7 +1286,7 @@ retry: list_del_init(&capsnap->flushing_item); list_add_tail(&capsnap->flushing_item, &session->s_cap_snaps_flushing); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("flush_snaps %p cap_snap %p follows %lld tid %llu\n", inode, capsnap, capsnap->follows, capsnap->flush_tid); @@ -1302,7 +1303,7 @@ retry: next_follows = capsnap->follows + 1; ceph_put_cap_snap(capsnap); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); goto retry; } @@ -1322,11 +1323,9 @@ out: static void ceph_flush_snaps(struct ceph_inode_info *ci) { - struct inode *inode = &ci->vfs_inode; - - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_flush_snaps(ci, NULL, 0); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -1373,7 +1372,7 @@ int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask) * Add dirty inode to the flushing list. Assigned a seq number so we * can wait for caps to flush without starving. * - * Called under i_lock. + * Called under i_ceph_lock. */ static int __mark_caps_flushing(struct inode *inode, struct ceph_mds_session *session) @@ -1421,9 +1420,9 @@ static int try_nonblocking_invalidate(struct inode *inode) struct ceph_inode_info *ci = ceph_inode(inode); u32 invalidating_gen = ci->i_rdcache_gen; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); invalidate_mapping_pages(&inode->i_data, 0, -1); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (inode->i_data.nrpages == 0 && invalidating_gen == ci->i_rdcache_gen) { @@ -1470,7 +1469,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags, if (mdsc->stopping) is_delayed = 1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_ceph_flags & CEPH_I_FLUSH) flags |= CHECK_CAPS_FLUSH; @@ -1480,7 +1479,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags, __ceph_flush_snaps(ci, &session, 0); goto retry_locked; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); retry_locked: file_wanted = __ceph_caps_file_wanted(ci); used = __ceph_caps_used(ci); @@ -1634,7 +1633,7 @@ ack: if (mutex_trylock(&session->s_mutex) == 0) { dout("inverting session/ino locks on %p\n", session); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (took_snap_rwsem) { up_read(&mdsc->snap_rwsem); took_snap_rwsem = 0; @@ -1648,7 +1647,7 @@ ack: if (down_read_trylock(&mdsc->snap_rwsem) == 0) { dout("inverting snap/in locks on %p\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); down_read(&mdsc->snap_rwsem); took_snap_rwsem = 1; goto retry; @@ -1664,10 +1663,10 @@ ack: mds = cap->mds; /* remember mds, so we don't repeat */ sent++; - /* __send_cap drops i_lock */ + /* __send_cap drops i_ceph_lock */ delayed += __send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, used, want, retain, flushing, NULL); - goto retry; /* retake i_lock and restart our cap scan. */ + goto retry; /* retake i_ceph_lock and restart our cap scan. */ } /* @@ -1681,7 +1680,7 @@ ack: else if (!is_delayed || force_requeue) __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (queue_invalidate) ceph_queue_invalidate(inode); @@ -1704,7 +1703,7 @@ static int try_flush_caps(struct inode *inode, struct ceph_mds_session *session, int flushing = 0; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_ceph_flags & CEPH_I_NOFLUSH) { dout("try_flush_caps skipping %p I_NOFLUSH set\n", inode); goto out; @@ -1716,7 +1715,7 @@ retry: int delayed; if (!session) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); session = cap->session; mutex_lock(&session->s_mutex); goto retry; @@ -1727,18 +1726,18 @@ retry: flushing = __mark_caps_flushing(inode, session); - /* __send_cap drops i_lock */ + /* __send_cap drops i_ceph_lock */ delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, used, want, cap->issued | cap->implemented, flushing, flush_tid); if (!delayed) goto out_unlocked; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); out_unlocked: if (session && unlock_session) mutex_unlock(&session->s_mutex); @@ -1753,7 +1752,7 @@ static int caps_are_flushed(struct inode *inode, unsigned tid) struct ceph_inode_info *ci = ceph_inode(inode); int i, ret = 1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); for (i = 0; i < CEPH_CAP_BITS; i++) if ((ci->i_flushing_caps & (1 << i)) && ci->i_cap_flush_tid[i] <= tid) { @@ -1761,7 +1760,7 @@ static int caps_are_flushed(struct inode *inode, unsigned tid) ret = 0; break; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -1868,10 +1867,10 @@ int ceph_write_inode(struct inode *inode, struct writeback_control *wbc) struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (__ceph_caps_dirty(ci)) __cap_delay_requeue_front(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } return err; } @@ -1894,7 +1893,7 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, struct inode *inode = &ci->vfs_inode; struct ceph_cap *cap; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; if (cap && cap->session == session) { dout("kick_flushing_caps %p cap %p capsnap %p\n", inode, @@ -1904,7 +1903,7 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } @@ -1921,7 +1920,7 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc, struct ceph_cap *cap; int delayed = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; if (cap && cap->session == session) { dout("kick_flushing_caps %p cap %p %s\n", inode, @@ -1932,14 +1931,14 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc, cap->issued | cap->implemented, ci->i_flushing_caps, NULL); if (delayed) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else { pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } } @@ -1952,7 +1951,7 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, struct ceph_cap *cap; int delayed = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; dout("kick_flushing_inode_caps %p flushing %s flush_seq %lld\n", inode, ceph_cap_string(ci->i_flushing_caps), ci->i_cap_flush_seq); @@ -1964,12 +1963,12 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, cap->issued | cap->implemented, ci->i_flushing_caps, NULL); if (delayed) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } @@ -1978,7 +1977,7 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, * Take references to capabilities we hold, so that we don't release * them to the MDS prematurely. * - * Protected by i_lock. + * Protected by i_ceph_lock. */ static void __take_cap_refs(struct ceph_inode_info *ci, int got) { @@ -2016,7 +2015,7 @@ static int try_get_cap_refs(struct ceph_inode_info *ci, int need, int want, dout("get_cap_refs %p need %s want %s\n", inode, ceph_cap_string(need), ceph_cap_string(want)); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* make sure file is actually open */ file_wanted = __ceph_caps_file_wanted(ci); @@ -2077,7 +2076,7 @@ static int try_get_cap_refs(struct ceph_inode_info *ci, int need, int want, ceph_cap_string(have), ceph_cap_string(need)); } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("get_cap_refs %p ret %d got %s\n", inode, ret, ceph_cap_string(*got)); return ret; @@ -2094,7 +2093,7 @@ static void check_max_size(struct inode *inode, loff_t endoff) int check = 0; /* do we need to explicitly request a larger max_size? */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if ((endoff >= ci->i_max_size || endoff > (inode->i_size << 1)) && endoff > ci->i_wanted_max_size) { @@ -2103,7 +2102,7 @@ static void check_max_size(struct inode *inode, loff_t endoff) ci->i_wanted_max_size = endoff; check = 1; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (check) ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); } @@ -2140,9 +2139,9 @@ retry: */ void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps) { - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); __take_cap_refs(ci, caps); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2160,7 +2159,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had) int last = 0, put = 0, flushsnaps = 0, wake = 0; struct ceph_cap_snap *capsnap; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (had & CEPH_CAP_PIN) --ci->i_pin_ref; if (had & CEPH_CAP_FILE_RD) @@ -2193,7 +2192,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had) } } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("put_cap_refs %p had %s%s%s\n", inode, ceph_cap_string(had), last ? " last" : "", put ? " put" : ""); @@ -2225,7 +2224,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, int found = 0; struct ceph_cap_snap *capsnap = NULL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_wrbuffer_ref -= nr; last = !ci->i_wrbuffer_ref; @@ -2274,7 +2273,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (last) { ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); @@ -2291,7 +2290,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, * Handle a cap GRANT message from the MDS. (Note that a GRANT may * actually be a revocation if it specifies a smaller cap set.) * - * caller holds s_mutex and i_lock, we drop both. + * caller holds s_mutex and i_ceph_lock, we drop both. * * return value: * 0 - ok @@ -2302,7 +2301,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, struct ceph_mds_session *session, struct ceph_cap *cap, struct ceph_buffer *xattr_buf) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); int mds = session->s_mds; @@ -2453,7 +2452,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, } BUG_ON(cap->issued & ~cap->implemented); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (writeback) /* * queue inode for writeback: we can't actually call @@ -2483,7 +2482,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid, struct ceph_mds_caps *m, struct ceph_mds_session *session, struct ceph_cap *cap) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc; @@ -2539,7 +2538,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid, wake_up_all(&ci->i_cap_wq); out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (drop) iput(inode); } @@ -2562,7 +2561,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, dout("handle_cap_flushsnap_ack inode %p ci %p mds%d follows %lld\n", inode, ci, session->s_mds, follows); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) { if (capsnap->follows == follows) { if (capsnap->flush_tid != flush_tid) { @@ -2585,7 +2584,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, capsnap, capsnap->follows); } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (drop) iput(inode); } @@ -2598,7 +2597,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, static void handle_cap_trunc(struct inode *inode, struct ceph_mds_caps *trunc, struct ceph_mds_session *session) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); int mds = session->s_mds; @@ -2617,7 +2616,7 @@ static void handle_cap_trunc(struct inode *inode, inode, mds, seq, truncate_size, truncate_seq); queue_trunc = ceph_fill_file_size(inode, issued, truncate_seq, truncate_size, size); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (queue_trunc) ceph_queue_vmtruncate(inode); @@ -2646,7 +2645,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex, dout("handle_cap_export inode %p ci %p mds%d mseq %d\n", inode, ci, mds, mseq); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* make sure we haven't seen a higher mseq */ for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) { @@ -2690,7 +2689,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex, } /* else, we already released it */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2745,9 +2744,9 @@ static void handle_cap_import(struct ceph_mds_client *mdsc, up_read(&mdsc->snap_rwsem); /* make sure we re-request max_size, if necessary */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_requested_max_size = 0; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2762,6 +2761,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, struct ceph_mds_client *mdsc = session->s_mdsc; struct super_block *sb = mdsc->fsc->sb; struct inode *inode; + struct ceph_inode_info *ci; struct ceph_cap *cap; struct ceph_mds_caps *h; int mds = session->s_mds; @@ -2815,6 +2815,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, /* lookup ino */ inode = ceph_find_inode(sb, vino); + ci = ceph_inode(inode); dout(" op %s ino %llx.%llx inode %p\n", ceph_cap_op_name(op), vino.ino, vino.snap, inode); if (!inode) { @@ -2844,16 +2845,16 @@ void ceph_handle_caps(struct ceph_mds_session *session, } /* the rest require a cap */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ceph_inode(inode), mds); if (!cap) { dout(" no cap on %p ino %llx.%llx from mds%d\n", inode, ceph_ino(inode), ceph_snap(inode), mds); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto flush_cap_releases; } - /* note that each of these drops i_lock for us */ + /* note that each of these drops i_ceph_lock for us */ switch (op) { case CEPH_CAP_OP_REVOKE: case CEPH_CAP_OP_GRANT: @@ -2869,7 +2870,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, break; default: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); pr_err("ceph_handle_caps: unknown cap op %d %s\n", op, ceph_cap_op_name(op)); } @@ -2962,13 +2963,13 @@ void ceph_put_fmode(struct ceph_inode_info *ci, int fmode) struct inode *inode = &ci->vfs_inode; int last = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("put_fmode %p fmode %d %d -> %d\n", inode, fmode, ci->i_nr_by_mode[fmode], ci->i_nr_by_mode[fmode]-1); BUG_ON(ci->i_nr_by_mode[fmode] == 0); if (--ci->i_nr_by_mode[fmode] == 0) last++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (last && ci->i_vino.snap == CEPH_NOSNAP) ceph_check_caps(ci, 0, NULL); @@ -2991,7 +2992,7 @@ int ceph_encode_inode_release(void **p, struct inode *inode, int used, dirty; int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); used = __ceph_caps_used(ci); dirty = __ceph_caps_dirty(ci); @@ -3046,7 +3047,7 @@ int ceph_encode_inode_release(void **p, struct inode *inode, inode, cap, ceph_cap_string(cap->issued)); } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -3061,7 +3062,7 @@ int ceph_encode_dentry_release(void **p, struct dentry *dentry, /* * force an record for the directory caps if we have a dentry lease. - * this is racy (can't take i_lock and d_lock together), but it + * this is racy (can't take i_ceph_lock and d_lock together), but it * doesn't have to be perfect; the mds will revoke anything we don't * release. */ diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index bca3948..3eeb976 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -281,18 +281,18 @@ static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir) } /* can we use the dcache? */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if ((filp->f_pos == 2 || fi->dentry) && !ceph_test_mount_opt(fsc, NOASYNCREADDIR) && ceph_snap(inode) != CEPH_SNAPDIR && ceph_dir_test_complete(inode) && __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = __dcache_readdir(filp, dirent, filldir); if (err != -EAGAIN) return err; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } if (fi->dentry) { err = note_last_dentry(fi, fi->dentry->d_name.name, @@ -428,12 +428,12 @@ more: * were released during the whole readdir, and we should have * the complete dir contents in our cache. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_release_count == fi->dir_release_count) { ceph_dir_set_complete(inode); ci->i_max_offset = filp->f_pos; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("readdir %p filp %p done.\n", inode, filp); return 0; @@ -607,7 +607,7 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry, struct ceph_inode_info *ci = ceph_inode(dir); struct ceph_dentry_info *di = ceph_dentry(dentry); - spin_lock(&dir->i_lock); + spin_lock(&ci->i_ceph_lock); dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags); if (strncmp(dentry->d_name.name, fsc->mount_options->snapdir_name, @@ -615,13 +615,13 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry, !is_root_ceph_dentry(dir, dentry) && ceph_dir_test_complete(dir) && (__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) { - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); dout(" dir %p complete, -ENOENT\n", dir); d_add(dentry, NULL); di->lease_shared_gen = ci->i_shared_gen; return NULL; } - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); } op = ceph_snap(dir) == CEPH_SNAPDIR ? @@ -841,12 +841,12 @@ static int drop_caps_for_unlink(struct inode *inode) struct ceph_inode_info *ci = ceph_inode(inode); int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (inode->i_nlink == 1) { drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN); ci->i_ceph_flags |= CEPH_I_NODELAY; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return drop; } @@ -1015,10 +1015,10 @@ static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry) struct ceph_dentry_info *di = ceph_dentry(dentry); int valid = 0; - spin_lock(&dir->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_shared_gen == di->lease_shared_gen) valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1); - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n", dir, (unsigned)ci->i_shared_gen, dentry, (unsigned)di->lease_shared_gen, valid); diff --git a/fs/ceph/file.c b/fs/ceph/file.c index ce549d3..af18733 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -147,9 +147,9 @@ int ceph_open(struct inode *inode, struct file *file) /* trivially open snapdir */ if (ceph_snap(inode) == CEPH_SNAPDIR) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ceph_init_file(inode, file, fmode); } @@ -158,7 +158,7 @@ int ceph_open(struct inode *inode, struct file *file) * write) or any MDS (for read). Update wanted set * asynchronously. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (__ceph_is_any_real_caps(ci) && (((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) { int mds_wanted = __ceph_caps_mds_wanted(ci); @@ -168,7 +168,7 @@ int ceph_open(struct inode *inode, struct file *file) inode, fmode, ceph_cap_string(wanted), ceph_cap_string(issued)); __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* adjust wanted? */ if ((issued & wanted) != wanted && @@ -180,10 +180,10 @@ int ceph_open(struct inode *inode, struct file *file) } else if (ceph_snap(inode) != CEPH_NOSNAP && (ci->i_snap_caps & wanted) == wanted) { __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ceph_init_file(inode, file, fmode); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("open fmode %d wants %s\n", fmode, ceph_cap_string(wanted)); req = prepare_open_request(inode->i_sb, flags, 0); @@ -743,9 +743,9 @@ retry_snap: */ int dirty; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_put_cap_refs(ci, got); ret = generic_file_aio_write(iocb, iov, nr_segs, pos); @@ -764,9 +764,9 @@ retry_snap: if (ret >= 0) { int dirty; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); } diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 116f365..87fb132 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -297,6 +297,8 @@ struct inode *ceph_alloc_inode(struct super_block *sb) dout("alloc_inode %p\n", &ci->vfs_inode); + spin_lock_init(&ci->i_ceph_lock); + ci->i_version = 0; ci->i_time_warp_seq = 0; ci->i_ceph_flags = 0; @@ -583,7 +585,7 @@ static int fill_inode(struct inode *inode, iinfo->xattr_len); } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* * provided version will be odd if inode value is projected, @@ -680,7 +682,7 @@ static int fill_inode(struct inode *inode, char *sym; BUG_ON(symlen != inode->i_size); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = -ENOMEM; sym = kmalloc(symlen+1, GFP_NOFS); @@ -689,7 +691,7 @@ static int fill_inode(struct inode *inode, memcpy(sym, iinfo->symlink, symlen); sym[symlen] = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ci->i_symlink) ci->i_symlink = sym; else @@ -715,7 +717,7 @@ static int fill_inode(struct inode *inode, } no_change: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* queue truncate if we saw i_size decrease */ if (queue_trunc) @@ -750,13 +752,13 @@ no_change: info->cap.flags, caps_reservation); } else { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout(" %p got snap_caps %s\n", inode, ceph_cap_string(le32_to_cpu(info->cap.caps))); ci->i_snap_caps |= le32_to_cpu(info->cap.caps); if (cap_fmode >= 0) __ceph_get_fmode(ci, cap_fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else if (cap_fmode >= 0) { pr_warning("mds issued no caps on %llx.%llx\n", @@ -849,19 +851,20 @@ static void ceph_set_dentry_offset(struct dentry *dn) { struct dentry *dir = dn->d_parent; struct inode *inode = dir->d_inode; + struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_dentry_info *di; BUG_ON(!inode); di = ceph_dentry(dn); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ceph_dir_test_complete(inode)) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return; } di->offset = ceph_inode(inode)->i_max_offset++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); spin_lock(&dir->d_lock); spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED); @@ -1308,7 +1311,7 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) struct ceph_inode_info *ci = ceph_inode(inode); int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("set_size %p %llu -> %llu\n", inode, inode->i_size, size); inode->i_size = size; inode->i_blocks = (size + (1 << 9) - 1) >> 9; @@ -1318,7 +1321,7 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) (ci->i_reported_size << 1) < ci->i_max_size) ret = 1; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -1376,20 +1379,20 @@ static void ceph_invalidate_work(struct work_struct *work) u32 orig_gen; int check = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("invalidate_pages %p gen %d revoking %d\n", inode, ci->i_rdcache_gen, ci->i_rdcache_revoking); if (ci->i_rdcache_revoking != ci->i_rdcache_gen) { /* nevermind! */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto out; } orig_gen = ci->i_rdcache_gen; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); truncate_inode_pages(&inode->i_data, 0); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (orig_gen == ci->i_rdcache_gen && orig_gen == ci->i_rdcache_revoking) { dout("invalidate_pages %p gen %d successful\n", inode, @@ -1401,7 +1404,7 @@ static void ceph_invalidate_work(struct work_struct *work) inode, orig_gen, ci->i_rdcache_gen, ci->i_rdcache_revoking); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (check) ceph_check_caps(ci, 0, NULL); @@ -1460,10 +1463,10 @@ void __ceph_do_pending_vmtruncate(struct inode *inode) int wrbuffer_refs, wake = 0; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_truncate_pending == 0) { dout("__do_pending_vmtruncate %p none pending\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return; } @@ -1474,7 +1477,7 @@ retry: if (ci->i_wrbuffer_ref_head < ci->i_wrbuffer_ref) { dout("__do_pending_vmtruncate %p flushing snaps first\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); filemap_write_and_wait_range(&inode->i_data, 0, inode->i_sb->s_maxbytes); goto retry; @@ -1484,15 +1487,15 @@ retry: wrbuffer_refs = ci->i_wrbuffer_ref; dout("__do_pending_vmtruncate %p (%d) to %lld\n", inode, ci->i_truncate_pending, to); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); truncate_inode_pages(inode->i_mapping, to); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_truncate_pending--; if (ci->i_truncate_pending == 0) wake = 1; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (wrbuffer_refs == 0) ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); @@ -1547,7 +1550,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) if (IS_ERR(req)) return PTR_ERR(req); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); issued = __ceph_caps_issued(ci, NULL); dout("setattr %p issued %s\n", inode, ceph_cap_string(issued)); @@ -1695,7 +1698,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) } release &= issued; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (inode_dirty_flags) __mark_inode_dirty(inode, inode_dirty_flags); @@ -1717,7 +1720,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) __ceph_do_pending_vmtruncate(inode); return err; out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_mdsc_put_request(req); return err; } diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c index 5a14c29..790914a59 100644 --- a/fs/ceph/ioctl.c +++ b/fs/ceph/ioctl.c @@ -241,11 +241,11 @@ static long ceph_ioctl_lazyio(struct file *file) struct ceph_inode_info *ci = ceph_inode(inode); if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_nr_by_mode[fi->fmode]--; fi->fmode |= CEPH_FILE_MODE_LAZY; ci->i_nr_by_mode[fi->fmode]++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("ioctl_layzio: file %p marked lazy\n", file); ceph_check_caps(ci, 0, NULL); diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 264ab70..34bc350 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -732,21 +732,21 @@ static int __choose_mds(struct ceph_mds_client *mdsc, } } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = NULL; if (mode == USE_AUTH_MDS) cap = ci->i_auth_cap; if (!cap && !RB_EMPTY_ROOT(&ci->i_caps)) cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node); if (!cap) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto random; } mds = cap->session->s_mds; dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n", inode, ceph_vinop(inode), mds, cap == ci->i_auth_cap ? "auth " : "", cap); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return mds; random: @@ -951,7 +951,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, dout("removing cap %p, ci is %p, inode is %p\n", cap, ci, &ci->vfs_inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_remove_cap(cap); if (!__ceph_is_any_real_caps(ci)) { struct ceph_mds_client *mdsc = @@ -984,7 +984,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, } spin_unlock(&mdsc->cap_dirty_lock); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); while (drop--) iput(inode); return 0; @@ -1015,10 +1015,10 @@ static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap, wake_up_all(&ci->i_cap_wq); if (arg) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_wanted_max_size = 0; ci->i_requested_max_size = 0; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } return 0; } @@ -1151,7 +1151,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) if (session->s_trim_caps <= 0) return -1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); mine = cap->issued | cap->implemented; used = __ceph_caps_used(ci); oissued = __ceph_caps_issued_other(ci, cap); @@ -1170,7 +1170,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) __ceph_remove_cap(cap); } else { /* try to drop referring dentries */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); d_prune_aliases(inode); dout("trim_caps_cb %p cap %p pruned, count now %d\n", inode, cap, atomic_read(&inode->i_count)); @@ -1178,7 +1178,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return 0; } @@ -1296,7 +1296,7 @@ static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq) i_flushing_item); struct inode *inode = &ci->vfs_inode; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_cap_flush_seq <= want_flush_seq) { dout("check_cap_flush still flushing %p " "seq %lld <= %lld to mds%d\n", inode, @@ -1304,7 +1304,7 @@ static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq) session->s_mds); ret = 0; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } mutex_unlock(&session->s_mutex); ceph_put_mds_session(session); @@ -2011,10 +2011,10 @@ void ceph_invalidate_dir_request(struct ceph_mds_request *req) struct ceph_inode_info *ci = ceph_inode(inode); dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ceph_dir_clear_complete(inode); ci->i_release_count++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (req->r_dentry) ceph_invalidate_dentry_lease(req->r_dentry); @@ -2422,7 +2422,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, if (err) goto out_free; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap->seq = 0; /* reset cap seq */ cap->issue_seq = 0; /* and issue_seq */ @@ -2445,7 +2445,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, rec.v1.pathbase = cpu_to_le64(pathbase); reclen = sizeof(rec.v1); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (recon_state->flock) { int num_fcntl_locks, num_flock_locks; diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index 4bb2399..a50ca0e 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -20,7 +20,7 @@ * * mdsc->snap_rwsem * - * inode->i_lock + * ci->i_ceph_lock * mdsc->snap_flush_lock * mdsc->cap_delay_lock * diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index e264371..a559c80 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -446,7 +446,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) return; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); used = __ceph_caps_used(ci); dirty = __ceph_caps_dirty(ci); @@ -528,7 +528,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) kfree(capsnap); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -537,7 +537,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) * * If capsnap can now be flushed, add to snap_flush list, and return 1. * - * Caller must hold i_lock. + * Caller must hold i_ceph_lock. */ int __ceph_finish_cap_snap(struct ceph_inode_info *ci, struct ceph_cap_snap *capsnap) @@ -739,9 +739,9 @@ static void flush_snaps(struct ceph_mds_client *mdsc) inode = &ci->vfs_inode; ihold(inode); spin_unlock(&mdsc->snap_flush_lock); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_flush_snaps(ci, &session, 0); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); iput(inode); spin_lock(&mdsc->snap_flush_lock); } @@ -847,7 +847,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, continue; ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ci->i_snap_realm) goto skip_inode; /* @@ -876,7 +876,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, oldrealm = ci->i_snap_realm; ci->i_snap_realm = realm; spin_unlock(&realm->inodes_with_caps_lock); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_get_snap_realm(mdsc, realm); ceph_put_snap_realm(mdsc, oldrealm); @@ -885,7 +885,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, continue; skip_inode: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); iput(inode); } diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 01bf189..edcbf37 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -220,7 +220,7 @@ struct ceph_dentry_info { * The locking for D_COMPLETE is a bit odd: * - we can clear it at almost any time (see ceph_d_prune) * - it is only meaningful if: - * - we hold dir inode i_lock + * - we hold dir inode i_ceph_lock * - we hold dir FILE_SHARED caps * - the dentry D_COMPLETE is set */ @@ -250,6 +250,8 @@ struct ceph_inode_xattrs_info { struct ceph_inode_info { struct ceph_vino i_vino; /* ceph ino + snap */ + spinlock_t i_ceph_lock; + u64 i_version; u32 i_time_warp_seq; @@ -271,7 +273,7 @@ struct ceph_inode_info { struct ceph_inode_xattrs_info i_xattrs; - /* capabilities. protected _both_ by i_lock and cap->session's + /* capabilities. protected _both_ by i_ceph_lock and cap->session's * s_mutex. */ struct rb_root i_caps; /* cap list */ struct ceph_cap *i_auth_cap; /* authoritative cap, if any */ @@ -437,18 +439,18 @@ static inline void ceph_i_clear(struct inode *inode, unsigned mask) { struct ceph_inode_info *ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_ceph_flags &= ~mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } static inline void ceph_i_set(struct inode *inode, unsigned mask) { struct ceph_inode_info *ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_ceph_flags |= mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } static inline bool ceph_i_test(struct inode *inode, unsigned mask) @@ -456,9 +458,9 @@ static inline bool ceph_i_test(struct inode *inode, unsigned mask) struct ceph_inode_info *ci = ceph_inode(inode); bool r; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); r = (ci->i_ceph_flags & mask) == mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return r; } @@ -508,9 +510,9 @@ extern int __ceph_caps_issued_other(struct ceph_inode_info *ci, static inline int ceph_caps_issued(struct ceph_inode_info *ci) { int issued; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); issued = __ceph_caps_issued(ci, NULL); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return issued; } @@ -518,9 +520,9 @@ static inline int ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch) { int r; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); r = __ceph_caps_issued_mask(ci, mask, touch); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return r; } @@ -743,10 +745,9 @@ extern int ceph_add_cap(struct inode *inode, extern void __ceph_remove_cap(struct ceph_cap *cap); static inline void ceph_remove_cap(struct ceph_cap *cap) { - struct inode *inode = &cap->ci->vfs_inode; - spin_lock(&inode->i_lock); + spin_lock(&cap->ci->i_ceph_lock); __ceph_remove_cap(cap); - spin_unlock(&inode->i_lock); + spin_unlock(&cap->ci->i_ceph_lock); } extern void ceph_put_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap); diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c index 96c6739..a5e36e4 100644 --- a/fs/ceph/xattr.c +++ b/fs/ceph/xattr.c @@ -343,8 +343,8 @@ void __ceph_destroy_xattrs(struct ceph_inode_info *ci) } static int __build_xattrs(struct inode *inode) - __releases(inode->i_lock) - __acquires(inode->i_lock) + __releases(ci->i_ceph_lock) + __acquires(ci->i_ceph_lock) { u32 namelen; u32 numattr = 0; @@ -372,7 +372,7 @@ start: end = p + ci->i_xattrs.blob->vec.iov_len; ceph_decode_32_safe(&p, end, numattr, bad); xattr_version = ci->i_xattrs.version; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); xattrs = kcalloc(numattr, sizeof(struct ceph_xattr *), GFP_NOFS); @@ -387,7 +387,7 @@ start: goto bad_lock; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_xattrs.version != xattr_version) { /* lost a race, retry */ for (i = 0; i < numattr; i++) @@ -418,7 +418,7 @@ start: return err; bad_lock: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); bad: if (xattrs) { for (i = 0; i < numattr; i++) @@ -512,7 +512,7 @@ ssize_t ceph_getxattr(struct dentry *dentry, const char *name, void *value, if (vxattrs) vxattr = ceph_match_vxattr(vxattrs, name); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("getxattr %p ver=%lld index_ver=%lld\n", inode, ci->i_xattrs.version, ci->i_xattrs.index_version); @@ -520,14 +520,14 @@ ssize_t ceph_getxattr(struct dentry *dentry, const char *name, void *value, (ci->i_xattrs.index_version >= ci->i_xattrs.version)) { goto get_xattr; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* get xattrs from mds (if we don't already have them) */ err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR); if (err) return err; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (vxattr && vxattr->readonly) { err = vxattr->getxattr_cb(ci, value, size); @@ -558,7 +558,7 @@ get_xattr: memcpy(value, xattr->val, xattr->val_len); out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return err; } @@ -573,7 +573,7 @@ ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size) u32 len; int i; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("listxattr %p ver=%lld index_ver=%lld\n", inode, ci->i_xattrs.version, ci->i_xattrs.index_version); @@ -581,13 +581,13 @@ ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size) (ci->i_xattrs.index_version >= ci->i_xattrs.version)) { goto list_xattr; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR); if (err) return err; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); err = __build_xattrs(inode); if (err < 0) @@ -619,7 +619,7 @@ list_xattr: } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return err; } @@ -739,7 +739,7 @@ int ceph_setxattr(struct dentry *dentry, const char *name, if (!xattr) goto out; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); retry: issued = __ceph_caps_issued(ci, NULL); if (!(issued & CEPH_CAP_XATTR_EXCL)) @@ -752,12 +752,12 @@ retry: required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) { struct ceph_buffer *blob = NULL; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout(" preaallocating new blob size=%d\n", required_blob_size); blob = ceph_buffer_new(required_blob_size, GFP_NOFS); if (!blob) goto out; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_xattrs.prealloc_blob) ceph_buffer_put(ci->i_xattrs.prealloc_blob); ci->i_xattrs.prealloc_blob = blob; @@ -770,13 +770,13 @@ retry: dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL); ci->i_xattrs.dirty = true; inode->i_ctime = CURRENT_TIME; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); return err; do_sync: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_sync_setxattr(dentry, name, value, size, flags); out: kfree(newname); @@ -833,7 +833,7 @@ int ceph_removexattr(struct dentry *dentry, const char *name) return -EOPNOTSUPP; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __build_xattrs(inode); issued = __ceph_caps_issued(ci, NULL); dout("removexattr %p issued %s\n", inode, ceph_cap_string(issued)); @@ -846,12 +846,12 @@ int ceph_removexattr(struct dentry *dentry, const char *name) ci->i_xattrs.dirty = true; inode->i_ctime = CURRENT_TIME; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); return err; do_sync: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_send_removexattr(dentry, name); return err; } -- cgit v0.10.2 From 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 11 Nov 2011 05:10:39 +0000 Subject: fsl_pq_mdio: Clean up tbi address configuration The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 52f4e8a..4d9f84b 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -183,28 +183,10 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np) } EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name); -/* Scan the bus in reverse, looking for an empty spot */ -static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) -{ - int i; - - for (i = PHY_MAX_ADDR; i > 0; i--) { - u32 phy_id; - - if (get_phy_id(new_bus, i, &phy_id)) - return -1; - - if (phy_id == 0xffffffff) - break; - } - - return i; -} - -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) { +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) struct gfar __iomem *enet_regs; /* @@ -220,15 +202,15 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi")) { return of_iomap(np, 1); - } else - return NULL; -} + } #endif + return NULL; +} -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) { +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) struct device_node *np = NULL; int err = 0; @@ -261,9 +243,10 @@ static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) return err; else return -EINVAL; -} +#else + return -ENODEV; #endif - +} static int fsl_pq_mdio_probe(struct platform_device *ofdev) { @@ -339,19 +322,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi") || of_device_is_compatible(np, "gianfar")) { -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) tbipa = get_gfar_tbipa(regs, np); if (!tbipa) { err = -EINVAL; goto err_free_irqs; } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || of_device_is_compatible(np, "ucc_geth_phy")) { -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) u32 id; static u32 mii_mng_master; @@ -364,10 +341,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) mii_mng_master = id; ucc_set_qe_mux_mii_mng(id - 1); } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else { err = -ENODEV; goto err_free_irqs; @@ -386,16 +359,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) } if (tbiaddr == -1) { - out_be32(tbipa, 0); - - tbiaddr = fsl_pq_mdio_find_free(new_bus); - } - - /* - * We define TBIPA at 0 to be illegal, opting to fail for boards that - * have PHYs at 1-31, rather than change tbipa and rescan. - */ - if (tbiaddr == 0) { err = -EBUSY; goto err_free_irqs; -- cgit v0.10.2 From 15062e6a8524f5977f2cbdf6e3eb2f144262f74e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Dec 2011 09:02:21 +0100 Subject: mac80211: fix another race in aggregation start Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 331472c..d448f7a 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -302,6 +302,38 @@ ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid) __release(agg_queue); } +/* + * splice packets from the STA's pending to the local pending, + * requires a call to ieee80211_agg_splice_finish later + */ +static void __acquires(agg_queue) +ieee80211_agg_splice_packets(struct ieee80211_local *local, + struct tid_ampdu_tx *tid_tx, u16 tid) +{ + int queue = ieee80211_ac_from_tid(tid); + unsigned long flags; + + ieee80211_stop_queue_agg(local, tid); + + if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates" + " from the pending queue\n", tid)) + return; + + if (!skb_queue_empty(&tid_tx->pending)) { + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + /* copy over remaining packets */ + skb_queue_splice_tail_init(&tid_tx->pending, + &local->pending[queue]); + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } +} + +static void __releases(agg_queue) +ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid) +{ + ieee80211_wake_queue_agg(local, tid); +} + void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) { struct tid_ampdu_tx *tid_tx; @@ -313,19 +345,17 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) tid_tx = rcu_dereference_protected_tid_tx(sta, tid); /* - * While we're asking the driver about the aggregation, - * stop the AC queue so that we don't have to worry - * about frames that came in while we were doing that, - * which would require us to put them to the AC pending - * afterwards which just makes the code more complex. + * Start queuing up packets for this aggregation session. + * We're going to release them once the driver is OK with + * that. */ - ieee80211_stop_queue_agg(local, tid); - clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); /* - * make sure no packets are being processed to get - * valid starting sequence number + * Make sure no packets are being processed. This ensures that + * we have a valid starting sequence number and that in-flight + * packets have been flushed out and no packets for this TID + * will go into the driver during the ampdu_action call. */ synchronize_net(); @@ -339,17 +369,15 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) " tid %d\n", tid); #endif spin_lock_bh(&sta->lock); + ieee80211_agg_splice_packets(local, tid_tx, tid); ieee80211_assign_tid_tx(sta, tid, NULL); + ieee80211_agg_splice_finish(local, tid); spin_unlock_bh(&sta->lock); - ieee80211_wake_queue_agg(local, tid); kfree_rcu(tid_tx, rcu_head); return; } - /* we can take packets again now */ - ieee80211_wake_queue_agg(local, tid); - /* activate the timer for the recipient's addBA response */ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL); #ifdef CONFIG_MAC80211_HT_DEBUG @@ -465,38 +493,6 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, } EXPORT_SYMBOL(ieee80211_start_tx_ba_session); -/* - * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish later - */ -static void __acquires(agg_queue) -ieee80211_agg_splice_packets(struct ieee80211_local *local, - struct tid_ampdu_tx *tid_tx, u16 tid) -{ - int queue = ieee80211_ac_from_tid(tid); - unsigned long flags; - - ieee80211_stop_queue_agg(local, tid); - - if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates" - " from the pending queue\n", tid)) - return; - - if (!skb_queue_empty(&tid_tx->pending)) { - spin_lock_irqsave(&local->queue_stop_reason_lock, flags); - /* copy over remaining packets */ - skb_queue_splice_tail_init(&tid_tx->pending, - &local->pending[queue]); - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - } -} - -static void __releases(agg_queue) -ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid) -{ - ieee80211_wake_queue_agg(local, tid); -} - static void ieee80211_agg_tx_operational(struct ieee80211_local *local, struct sta_info *sta, u16 tid) { -- cgit v0.10.2 From 91ddff8a3b9cc7ac2252aca138220939cf6cc2cf Mon Sep 17 00:00:00 2001 From: Philipp Dreimann Date: Wed, 7 Dec 2011 13:43:31 -0600 Subject: rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition In drivers rtl8192ce, rtl8192cu, rtl8192se, and rtl8192de, break statements would allow ppsc->rfpwr_state to be changed to ERFSLEEP even though the device is actually in ERFOFF. Signed-off-by: Philipp Dreimann Signed-off-by: Larry Finger Cc: Stable Cc: Chaoming Li Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c index 592a10a..3b585aa 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c @@ -569,7 +569,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP:{ if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c index 7285290..e49cf22 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c @@ -548,7 +548,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 3ac7af1..0883349 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3374,7 +3374,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c index f27171a..f10ac1a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c @@ -602,7 +602,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { -- cgit v0.10.2 From 807cc4b1201e82769f7435211310f5691dcb704d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 16 Nov 2011 20:01:43 +0100 Subject: spi/ath79: fix compile error due to missing include Whithout including 'linux/module.h' spi-ath79 driver fails to compile with the these errors: drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype Signed-off-by: Gabor Juhos Signed-off-by: Wolfram Sang diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 024b48a..acc88b4 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -13,6 +13,7 @@ */ #include +#include #include #include #include -- cgit v0.10.2 From 00d2952caa6b0b2cd113494ae39f08c4663f371b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 24 Nov 2011 11:10:51 +0800 Subject: spi/nuc900: Include linux/module.h Include linux/module.h to fix below build error: CC drivers/spi/spi-nuc900.o drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype make[2]: *** [drivers/spi/spi-nuc900.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Paul Gortmaker Signed-off-by: Wolfram Sang diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 21c70b2..182e9c8 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -8,6 +8,7 @@ * */ +#include #include #include #include -- cgit v0.10.2 From d9ddcec35d713dd33dc20dcb4db84db35f9956a6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 7 Dec 2011 21:18:16 +0100 Subject: spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build When spi_fsl_espi is chosen to be built as a module, there is a build error because we test only CONFIG_SPI_FSL_ESPI in declaration of struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called functions are not exported. So we forbid CONFIG_SPI_FSL_ESPI to be tristate here. The error looks like: drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs': drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len' ... Signed-off-by: Jiri Slaby Acked-by: Kumar Gala Cc: Grant Likely Signed-off-by: Wolfram Sang diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73d..8ba4510 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -199,7 +199,7 @@ config SPI_FSL_LIB depends on FSL_SOC config SPI_FSL_SPI - tristate "Freescale SPI controller" + bool "Freescale SPI controller" depends on FSL_SOC select SPI_FSL_LIB help @@ -208,7 +208,7 @@ config SPI_FSL_SPI MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. config SPI_FSL_ESPI - tristate "Freescale eSPI controller" + bool "Freescale eSPI controller" depends on FSL_SOC select SPI_FSL_LIB help -- cgit v0.10.2 From c65b53ba4f9ca4520078bab23099579da3bf0446 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 19 Nov 2011 13:08:10 +0100 Subject: spi/gpio: fix section mismatch warning Fixes: The function __devinit spi_gpio_probe() references a function __init spi_gpio_alloc.isra.4(). If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then annotate spi_gpio_alloc.isra.4 with a matching annotation. [wsa: fix spi_gpio_request(), too] Signed-off-by: Manuel Lauss Signed-off-by: Wolfram Sang diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index e093d3e..0094c645 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -256,7 +256,7 @@ static void spi_gpio_cleanup(struct spi_device *spi) spi_bitbang_cleanup(spi); } -static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) +static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in) { int value; @@ -270,7 +270,7 @@ static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) return value; } -static int __init +static int __devinit spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, u16 *res_flags) { -- cgit v0.10.2 From fe6b91f47080eb17d21cbf2a39311877d57f6938 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 6 Dec 2011 23:24:52 +0100 Subject: PM / Driver core: leave runtime PM enabled during system shutdown Disabling all runtime PM during system shutdown turns out not to be a good idea, because some devices may need to be woken up from a low-power state at that time. The whole point of disabling runtime PM for system shutdown was to prevent untimely runtime-suspend method calls. This patch (as1504) accomplishes the same result by incrementing the usage count for each device and waiting for ongoing runtime-PM callbacks to finish. This is what we already do during system suspend and hibernation, which makes sense since the shutdown method is pretty much a legacy analog of the pm->poweroff method. This fixes a recent regression on some OMAP systems introduced by commit af8db1508f2c9f3b6e633e2d2d906c6557c617f9 (PM / driver core: disable device's runtime PM during shutdown). Reported-and-tested-by: NeilBrown Signed-off-by: Alan Stern Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/core.c b/drivers/base/core.c index d8b3d89..919daa7 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1743,8 +1743,10 @@ void device_shutdown(void) */ list_del_init(&dev->kobj.entry); spin_unlock(&devices_kset->list_lock); - /* Disable all device's runtime power management */ - pm_runtime_disable(dev); + + /* Don't allow any more runtime suspends */ + pm_runtime_get_noresume(dev); + pm_runtime_barrier(dev); if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); -- cgit v0.10.2 From 062c05c46bd4358aad7a0e0cb5ffeb98ab935286 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 19:50:42 -0500 Subject: Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE If we reach LOOP_NO_EMPTY_SIZE, we won't even try to use a cluster that others might have set up. Odds are that there won't be one, but if someone else succeeded in setting it up, we might as well use it, even if we don't try to set up a cluster again. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 813c6bb..db0b23b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5285,15 +5285,10 @@ alloc: spin_unlock(&block_group->free_space_ctl->tree_lock); /* - * Ok we want to try and use the cluster allocator, so lets look - * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will - * have tried the cluster allocator plenty of times at this - * point and not have found anything, so we are likely way too - * fragmented for the clustering stuff to find anything, so lets - * just skip it and let the allocator find whatever block it can - * find + * Ok we want to try and use the cluster allocator, so + * lets look there */ - if (last_ptr && loop < LOOP_NO_EMPTY_SIZE) { + if (last_ptr) { /* * the refill lock keeps out other * people trying to start a new cluster @@ -5342,6 +5337,20 @@ alloc: } spin_unlock(&last_ptr->lock); refill_cluster: + /* If we are on LOOP_NO_EMPTY_SIZE, we can't + * set up a new clusters, so lets just skip it + * and let the allocator find whatever block + * it can find. If we reach this point, we + * will have tried the cluster allocator + * plenty of times and not have found + * anything, so we are likely way too + * fragmented for the clustering stuff to find + * anything. */ + if (loop >= LOOP_NO_EMPTY_SIZE) { + spin_unlock(&last_ptr->refill_lock); + goto unclustered_alloc; + } + /* * this cluster didn't work out, free it and * start over @@ -5389,6 +5398,7 @@ refill_cluster: goto loop; } +unclustered_alloc: offset = btrfs_find_space_for_alloc(block_group, search_start, num_bytes, empty_size); /* -- cgit v0.10.2 From d7a4c45ec24b6c6773ff302c3c9cb5ed46c8e211 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:07:53 +0900 Subject: ARM: SAMSUNG: remove duplicated header include This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305..a976c02 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From de611dd4078499d5aa5ae9655652687ae630585f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:08:38 +0900 Subject: ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a9106c3..8662ef6 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) -- cgit v0.10.2 From e248cd5d5f1c28c82781d4122dddd1b7c3d7b46f Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 8 Dec 2011 10:07:08 +0900 Subject: ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap Tested-by: Inderpal Singh Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df..959f251 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -428,9 +428,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } -- cgit v0.10.2 From 991a6c7d94a9be53f0302a1ada06e66a6ebf51e8 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 8 Dec 2011 10:04:49 +0900 Subject: ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park Acked-by: Changhwan Youn Signed-off-by: Kukjin Kim Cc: Marc Zyngier diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 959f251..85b5527 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -447,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -456,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) -- cgit v0.10.2 From aed21ad28b1323b2807faea019e5ac388a7bc837 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 23 Nov 2011 11:44:41 -0600 Subject: writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara Acked-by: Peter Zijlstra Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 7125248..155efca 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -411,8 +411,13 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) * * Returns @bdi's dirty limit in pages. The term "dirty" in the context of * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages. - * And the "limit" in the name is not seriously taken as hard limit in - * balance_dirty_pages(). + * + * Note that balance_dirty_pages() will only seriously take it as a hard limit + * when sleeping max_pause per page is not enough to keep the dirty pages under + * control. For example, when the device is completely stalled due to some error + * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key. + * In the other normal situations, it acts more gently by throttling the tasks + * more (rather than completely block them) when the bdi dirty pages go high. * * It allocates high/low dirty limits to fast/slow devices, in order to prevent * - starving fast devices @@ -594,6 +599,13 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, */ if (unlikely(bdi_thresh > thresh)) bdi_thresh = thresh; + /* + * It's very possible that bdi_thresh is close to 0 not because the + * device is slow, but that it has remained inactive for long time. + * Honour such devices a reasonable good (hopefully IO efficient) + * threshold, so that the occasional writes won't be blocked and active + * writes can rampup the threshold quickly. + */ bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); /* * scale global setpoint to bdi's: -- cgit v0.10.2 From c5c6343c4d75f9d3226e05a72e7861e967fc8099 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 10:21:33 -0600 Subject: writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 155efca..17403e3 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1148,6 +1148,19 @@ pause: if (task_ratelimit) break; + /* + * In the case of an unresponding NFS server and the NFS dirty + * pages exceeds dirty_thresh, give the other good bdi's a pipe + * to go through, so that tasks on them still remain responsive. + * + * In theory 1 page is enough to keep the comsumer-producer + * pipe going: the flusher cleans 1 page => the task dirties 1 + * more page. However bdi_dirty has accounting errors. So use + * the larger and more IO friendly bdi_stat_error. + */ + if (bdi_dirty <= bdi_stat_error(bdi)) + break; + if (fatal_signal_pending(current)) break; } -- cgit v0.10.2 From 82e230a07de3812a5e87a27979f033dad59172e3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 18:21:51 -0600 Subject: writeback: set max_pause to lowest value on zero bdi_dirty Some trace shows lots of bdi_dirty=0 lines where it's actually some small value if w/o the accounting errors in the per-cpu bdi stats. In this case the max pause time should really be set to the smallest (non-zero) value to avoid IO queue underrun and improve throughput. Signed-off-by: Wu Fengguang diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 17403e3..50f0824 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -989,8 +989,7 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi, * * 8 serves as the safety ratio. */ - if (bdi_dirty) - t = min(t, bdi_dirty * HZ / (8 * bw + 1)); + t = min(t, bdi_dirty * HZ / (8 * bw + 1)); /* * The pause time will be settled within range (max_pause/4, max_pause). -- cgit v0.10.2 From 053bf34f5aff499d7b595c500bbab5cbab3636e7 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Mon, 7 Nov 2011 21:55:11 +0530 Subject: mmc: omap_hsmmc: DMA unmap only once in case of MMC error Reported by Russell King: mmcblk0: error -84 transferring data, sector 149201, nr 64, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read WARNING: at lib/dma-debug.c:811 check_unmap omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000080933000] [size=20480 bytes] In case of an error dma_unmap() is issued in omap_hsmmc_dma_cleanup() and then again in omap_hsmmc_post_req(). Resolve this by clearing the host_cookie to indicate there is no DMA mapped memory to unmap. Signed-off-by: Per Forlin Tested-by: Balaji T K Tested-by: Russell King Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 101cd31..d5fe43d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1010,6 +1010,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); + host->data->host_cookie = 0; } host->data = NULL; } @@ -1575,8 +1576,10 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, struct mmc_data *data = mrq->data; if (host->use_dma) { - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - omap_hsmmc_get_dma_dir(host, data)); + if (data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); data->host_cookie = 0; } } -- cgit v0.10.2 From 1d23f178d56ae1349b4fc5108ac8f4f8cdc92afc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:12 +1100 Subject: md: refine interpretation of "hold_active == UNTIL_IOCTL". We like md devices to disappear when they really are not needed. However it is not possible to tell from the current state whether it is needed or not. We can only tell from recent history of changes. In particular immediately after we create an md device it looks very similar to immediately after we have finished with it. So we always preserve a newly created md device until something significant happens. This state is stored in 'hold_active'. The normal case is to keep it until an ioctl happens, as that will normally either activate it, or explicitly de-activate it. If it doesn't then it was probably created by mistake and it is now time to get rid of it. We can also modify an array via sysfs (instead of via ioctl) and we currently treat any change via sysfs like an ioctl as a sign that if it now isn't more active, it should be destroyed. However this is not appropriate as changes made via sysfs are more gradual so we should look for a more definitive change. So this patch only clears 'hold_active' from UNTIL_IOCTL to clear when the array_state is changed via sysfs. Other changes via sysfs are ignored. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 84acfe7..93b0da1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3788,6 +3788,8 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) if (err) return err; else { + if (mddev->hold_active == UNTIL_IOCTL) + mddev->hold_active = 0; sysfs_notify_dirent_safe(mddev->sysfs_state); return len; } @@ -4508,8 +4510,6 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, if (!capable(CAP_SYS_ADMIN)) return -EACCES; rv = mddev_lock(mddev); - if (mddev->hold_active == UNTIL_IOCTL) - mddev->hold_active = 0; if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); -- cgit v0.10.2 From af8a24347f966ab9fae6b0f127d1fbc9d6932d3a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:46 +1100 Subject: md: take a reference to mddev during sysfs access. When we are accessing an mddev via sysfs we know that the mddev cannot disappear because it has an embedded kobj which is refcounted by sysfs. And we also take the mddev_lock. However this is not enough. The final mddev_put could have been called and the mddev_delayed_delete is waiting for sysfs to let go so it can destroy the kobj and mddev. In this state there are a lot of changes that should not be attempted. To to guard against this we: - initialise mddev->all_mddevs in on last put so the state can be easily detected. - in md_attr_show and md_attr_store, check ->all_mddevs under all_mddevs_lock and mddev_get the mddev if it still appears to be active. This means that if we get to sysfs as the mddev is being deleted we will get -EBUSY. rdev_attr_store and rdev_attr_show are similar but already have sufficient protection. They check that rdev->mddev still points to mddev after taking mddev_lock. As this is cleared before delayed removal which can only be requested under the mddev_lock, this ensure the rdev and mddev are still alive. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 93b0da1..f97c3b2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -570,7 +570,7 @@ static void mddev_put(struct mddev *mddev) mddev->ctime == 0 && !mddev->hold_active) { /* Array is not configured at all, and not held active, * so destroy it */ - list_del(&mddev->all_mddevs); + list_del_init(&mddev->all_mddevs); bs = mddev->bio_set; mddev->bio_set = NULL; if (mddev->gendisk) { @@ -4489,11 +4489,20 @@ md_attr_show(struct kobject *kobj, struct attribute *attr, char *page) if (!entry->show) return -EIO; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); + rv = mddev_lock(mddev); if (!rv) { rv = entry->show(mddev, page); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } @@ -4509,11 +4518,19 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, return -EIO; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); rv = mddev_lock(mddev); if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } -- cgit v0.10.2 From 52c64152a935e63d9ff73ce823730c9a23dedbff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:22:48 +1100 Subject: md: bad blocks shouldn't cause a Blocked status on a Faulty device. Once a device is marked Faulty the badblocks - whether acknowledged or not - become irrelevant. So they shouldn't cause the device to be marked as Blocked. Without this patch, a process might write "-blocked" to clear the Blocked status, but while that will correctly fail the device, it won't remove the apparent 'blocked' status. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index f97c3b2..d730e8f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2546,7 +2546,8 @@ state_show(struct md_rdev *rdev, char *page) sep = ","; } if (test_bit(Blocked, &rdev->flags) || - rdev->badblocks.unacked_exist) { + (rdev->badblocks.unacked_exist + && !test_bit(Faulty, &rdev->flags))) { len += sprintf(page+len, "%sblocked", sep); sep = ","; } -- cgit v0.10.2 From 8bd2f0a05b361e07d48bb34398593f5f523946b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:26:08 +1100 Subject: md: ensure new badblocks are handled promptly. When we mark blocks as bad we need them to be acknowledged by the metadata handler promptly. For an in-kernel metadata handler that was already being done. But for an external metadata handler we need to alert it of the change by sending a notification through the sysfs file. This adds that notification. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index d730e8f..ee98173 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7858,6 +7858,7 @@ int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors, s + rdev->data_offset, sectors, acknowledged); if (rv) { /* Make sure they get written out promptly */ + sysfs_notify_dirent_safe(rdev->sysfs_state); set_bit(MD_CHANGE_CLEAN, &rdev->mddev->flags); md_wakeup_thread(rdev->mddev->thread); } -- cgit v0.10.2 From 9283d8c5af4cdcb809e655acdf4be368afec8b58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:27:57 +1100 Subject: md/raid5: never wait for bad-block acks on failed device. Once a device is failed we really want to completely ignore it. It should go away soon anyway. In particular the presence of bad blocks on it should not cause us to block as we won't be trying to write there anyway. So as soon as we can check if a device is Faulty, do so and pretend that it is already gone if it is Faulty. Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 297e260..b0dec01 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3036,6 +3036,8 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (dev->written) s->written++; rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = NULL; if (rdev) { is_bad = is_badblock(rdev, sh->sector, STRIPE_SECTORS, &first_bad, &bad_sectors); @@ -3063,7 +3065,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } } else if (test_bit(In_sync, &rdev->flags)) set_bit(R5_Insync, &dev->flags); - else if (!test_bit(Faulty, &rdev->flags)) { + else { /* in sync if before recovery_offset */ if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); -- cgit v0.10.2 From c564a0cb9d0c7f4ac50f1e9ca8bc67fd66cd550f Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Wed, 30 Nov 2011 14:32:54 +0800 Subject: ARM: sa1100: fix build error arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang Signed-off-by: Jett.Zhou diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6..f7951aa 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif -- cgit v0.10.2 From 274bd4fb3ed6b72c1d77ef8850511f09fc6b8e4d Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: try cluster but don't advance in search list When we find an existing cluster, we switch to its block group as the current block group, possibly skipping multiple blocks in the process. Furthermore, under heavy contention, multiple threads may fail to allocate from a cluster and then release just-created clusters just to proceed to create new ones in a different block group. This patch tries to allocate from an existing cluster regardless of its block group, and doesn't switch to that group, instead proceeding to try to allocate a cluster from the group it was iterating before the attempt. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index db0b23b..05e1386 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5106,11 +5106,11 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root = orig_root->fs_info->extent_root; struct btrfs_free_cluster *last_ptr = NULL; struct btrfs_block_group_cache *block_group = NULL; + struct btrfs_block_group_cache *used_block_group; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; int done_chunk_alloc = 0; struct btrfs_space_info *space_info; - int last_ptr_loop = 0; int loop = 0; int index = 0; int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ? @@ -5172,6 +5172,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); + used_block_group = block_group; /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. @@ -5209,6 +5210,7 @@ search: u64 offset; int cached; + used_block_group = block_group; btrfs_get_block_group(block_group); search_start = block_group->key.objectid; @@ -5294,49 +5296,33 @@ alloc: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); - if (!last_ptr->block_group || - last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data)) + used_block_group = last_ptr->block_group; + if (used_block_group != block_group && + (!used_block_group || + used_block_group->ro || + !block_group_bits(used_block_group, data))) { + used_block_group = block_group; goto refill_cluster; + } + + if (used_block_group != block_group) + btrfs_get_block_group(used_block_group); - offset = btrfs_alloc_from_cluster(block_group, last_ptr, - num_bytes, search_start); + offset = btrfs_alloc_from_cluster(used_block_group, + last_ptr, num_bytes, used_block_group->key.objectid); if (offset) { /* we have a block, we're done */ spin_unlock(&last_ptr->refill_lock); goto checks; } - spin_lock(&last_ptr->lock); - /* - * whoops, this cluster doesn't actually point to - * this block group. Get a ref on the block - * group is does point to and try again - */ - if (!last_ptr_loop && last_ptr->block_group && - last_ptr->block_group != block_group && - index <= - get_block_group_index(last_ptr->block_group)) { - - btrfs_put_block_group(block_group); - block_group = last_ptr->block_group; - btrfs_get_block_group(block_group); - spin_unlock(&last_ptr->lock); - spin_unlock(&last_ptr->refill_lock); - - last_ptr_loop = 1; - search_start = block_group->key.objectid; - /* - * we know this block group is properly - * in the list because - * btrfs_remove_block_group, drops the - * cluster before it removes the block - * group from the list - */ - goto have_block_group; + WARN_ON(last_ptr->block_group != used_block_group); + if (used_block_group != block_group) { + btrfs_put_block_group(used_block_group); + used_block_group = block_group; } - spin_unlock(&last_ptr->lock); refill_cluster: + BUG_ON(used_block_group != block_group); /* If we are on LOOP_NO_EMPTY_SIZE, we can't * set up a new clusters, so lets just skip it * and let the allocator find whatever block @@ -5357,8 +5343,6 @@ refill_cluster: */ btrfs_return_cluster_to_free_space(NULL, last_ptr); - last_ptr_loop = 0; - /* allocate a cluster in this block group */ ret = btrfs_find_space_cluster(trans, root, block_group, last_ptr, @@ -5425,14 +5409,14 @@ checks: search_start = stripe_align(root, offset); /* move on to the next group */ if (search_start + num_bytes >= search_end) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } /* move on to the next group */ if (search_start + num_bytes > - block_group->key.objectid + block_group->key.offset) { - btrfs_add_free_space(block_group, offset, num_bytes); + used_block_group->key.objectid + used_block_group->key.offset) { + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5440,14 +5424,14 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); - ret = btrfs_update_reserved_bytes(block_group, num_bytes, + ret = btrfs_update_reserved_bytes(used_block_group, num_bytes, alloc_type); if (ret == -EAGAIN) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5456,15 +5440,19 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); break; loop: failed_cluster_refill = false; failed_alloc = false; BUG_ON(index != get_block_group_index(block_group)); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); } up_read(&space_info->groups_sem); -- cgit v0.10.2 From a5d16333612718569ffd26064270e535cb9c3928 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: check if the to-be-added device is writable If we call ioctl(BTRFS_IOC_ADD_DEV) directly, we'll succeed in adding a readonly device to a btrfs filesystem, and btrfs will write to that device, emitting kernel errors: [ 3109.833692] lost page write due to I/O error on loop2 [ 3109.833720] lost page write due to I/O error on loop2 ... Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index c37433d..0a8c8f8 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1611,7 +1611,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) if ((sb->s_flags & MS_RDONLY) && !root->fs_info->fs_devices->seeding) return -EINVAL; - bdev = blkdev_get_by_path(device_path, FMODE_EXCL, + bdev = blkdev_get_by_path(device_path, FMODE_WRITE | FMODE_EXCL, root->fs_info->bdev_holder); if (IS_ERR(bdev)) return PTR_ERR(bdev); -- cgit v0.10.2 From 1cf4ffdb3289624a6462c94f2ce05545b32ef736 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: drop spin lock when memory alloc fails Drop spin lock in convert_extent_bit() when memory alloc fails, otherwise, it will be a deadlock. Signed-off-by: Liu Bo Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index be1bf62..49f3c9d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -935,8 +935,10 @@ again: node = tree_search(tree, start); if (!node) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = insert_state(tree, prealloc, start, end, &bits); prealloc = NULL; BUG_ON(err == -EEXIST); @@ -992,8 +994,10 @@ hit_next: */ if (state->start < start) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, start); BUG_ON(err == -EEXIST); prealloc = NULL; @@ -1024,8 +1028,10 @@ hit_next: this_end = last_start - 1; prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } /* * Avoid to free 'prealloc' if it can be merged with @@ -1051,8 +1057,10 @@ hit_next: */ if (state->start <= end && state->end > end) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, end + 1); BUG_ON(err == -EEXIST); -- cgit v0.10.2 From 329456d1ffb416c220813725b7363cda9975c9aa Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 5 Dec 2011 23:19:51 +0100 Subject: ssb: fix init regression with SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a Data bus error on some SoCs. The first fix for this problem did not solve it on all devices. commit 6ae8ec27868bfdbb815287bee8146acbefaee867 Author: Rafał Miłecki Date: Tue Jul 5 17:25:32 2011 +0200 ssb: fix init regression of hostmode PCI core In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is accessed, but the sprom only exists when the ssb bus is connected over a PCI bus to the rest of the system and not when the SSB Bus is the main system bus. SoCs sometimes have a PCI host controller and there this code will not be executed, but there are some old SoCs with an PCI controller in client mode around and ssb_pcicore_fix_sprom_core_index() should not be called on these devices too. The PCI controller on these devices are unused, but without this fix it results in an Data bus error when it gets initialized. Cc: Michael Buesch Cc: Rafał Miłecki Signed-off-by: Hauke Mehrtens Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index e6ac317..32c535f 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -516,10 +516,14 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { - ssb_pcicore_fix_sprom_core_index(pc); + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + + if (bus->bustype == SSB_BUSTYPE_PCI) + ssb_pcicore_fix_sprom_core_index(pc); /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); + ssb_write32(pdev, SSB_INTVEC, 0); /* Additional PCIe always once-executed workarounds */ if (pc->dev->id.coreid == SSB_DEV_PCIE) { -- cgit v0.10.2 From 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 18 Nov 2011 16:33:06 +0100 Subject: x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index b946a9e..1bb0bf4 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1049,6 +1049,14 @@ int hpet_rtc_timer_init(void) } EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); +static void hpet_disable_rtc_channel(void) +{ + unsigned long cfg; + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); +} + /* * The functions below are called from rtc driver. * Return 0 if HPET is not being used. @@ -1060,6 +1068,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask) return 0; hpet_rtc_flags &= ~bit_mask; + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); + return 1; } EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit); @@ -1125,15 +1136,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, delta; + unsigned int delta; int lost_ints = -1; - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; -- cgit v0.10.2 From 1418a3e5ad4d01b1d4abf2c479c50b0cedd59e3f Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 8 Dec 2011 21:24:06 +0900 Subject: TOMOYO: Fix pathname handling of disconnected paths. Current tomoyo_realpath_from_path() implementation returns strange pathname when calculating pathname of a file which belongs to lazy unmounted tree. Use local pathname rather than strange absolute pathname in that case. Also, this patch fixes a regression by commit 02125a82 "fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API". Signed-off-by: Tetsuo Handa Acked-by: Al Viro Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 36fa7c9..d9f3ced 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -293,8 +293,16 @@ char *tomoyo_realpath_from_path(struct path *path) pos = tomoyo_get_local_path(path->dentry, buf, buf_len - 1); /* Get absolute name for the rest. */ - else + else { pos = tomoyo_get_absolute_path(path, buf, buf_len - 1); + /* + * Fall back to local name if absolute name is not + * available. + */ + if (pos == ERR_PTR(-EINVAL)) + pos = tomoyo_get_local_path(path->dentry, buf, + buf_len - 1); + } encode: if (IS_ERR(pos)) continue; -- cgit v0.10.2 From 5d8c71f9e5fbdd95650be00294d238e27a363b5c Mon Sep 17 00:00:00 2001 From: Adam Kwolek Date: Fri, 9 Dec 2011 14:26:11 +1100 Subject: md: raid5 crash during degradation NULL pointer access causes crash in raid5 module. Signed-off-by: Adam Kwolek Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b0dec01..31670f8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3070,7 +3070,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); } - if (test_bit(R5_WriteError, &dev->flags)) { + if (rdev && test_bit(R5_WriteError, &dev->flags)) { clear_bit(R5_Insync, &dev->flags); if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; @@ -3078,7 +3078,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } else clear_bit(R5_WriteError, &dev->flags); } - if (test_bit(R5_MadeGood, &dev->flags)) { + if (rdev && test_bit(R5_MadeGood, &dev->flags)) { if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; atomic_inc(&rdev->nr_pending); -- cgit v0.10.2 From 9a5101c8968c7b3e7de5564af6358d7332cf9a6b Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 7 Nov 2011 16:11:24 +0300 Subject: CIFS: Add descriptions to the brlock cache functions Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/file.c b/fs/cifs/file.c index cf0b153..4dd9283 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -702,6 +702,13 @@ cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, lock->type, lock->netfid, conf_lock); } +/* + * Check if there is another lock that prevents us to set the lock (mandatory + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length, __u8 type, __u16 netfid, struct file_lock *flock) @@ -739,6 +746,12 @@ cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock) mutex_unlock(&cinode->lock_mutex); } +/* + * Set the byte-range lock (mandatory style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if no locks prevent us but we need to request to the server; + * 3) -EACCESS, if there is a lock that prevents us and wait is false. + */ static int cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, bool wait) @@ -778,6 +791,13 @@ try_again: return rc; } +/* + * Check if there is another lock that prevents us to set the lock (posix + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_posix_lock_test(struct file *file, struct file_lock *flock) { @@ -800,6 +820,12 @@ cifs_posix_lock_test(struct file *file, struct file_lock *flock) return rc; } +/* + * Set the byte-range lock (posix style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if we need to request to the server; + * 3) <0, if the error occurs while setting the lock. + */ static int cifs_posix_lock_set(struct file *file, struct file_lock *flock) { -- cgit v0.10.2 From 59edb63ad08e4f3a9477223c9aaf3fba753085bf Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 10 Nov 2011 12:48:20 -0600 Subject: cifs: Fix sparse warning when calling cifs_strtoUCS Fix sparse endian check warning while calling cifs_strtoUCS CHECK fs/cifs/smbencrypt.c fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1 (different base types) fs/cifs/smbencrypt.c:216:37: expected restricted __le16 [usertype] * fs/cifs/smbencrypt.c:216:37: got unsigned short * Signed-off-by: Steve French Acked-by: Shirish Pargaonkar Date: Thu, 1 Dec 2011 20:22:41 -0500 Subject: cifs: attempt to freeze while looping on a receive attempt In the recent overhaul of the demultiplex thread receive path, I neglected to ensure that we attempt to freeze on each pass through the receive loop. Reported-and-Tested-by: Woody Suwalski Reported-and-Tested-by: Adam Williamson Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d6a972d..8cd4b52 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -441,6 +441,8 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig, smb_msg.msg_controllen = 0; for (total_read = 0; to_read; total_read += length, to_read -= length) { + try_to_freeze(); + if (server_unresponsive(server)) { total_read = -EAGAIN; break; -- cgit v0.10.2 From 7023676f9ee851d94f0942e879243fc1f9081c47 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 1 Dec 2011 20:23:34 -0500 Subject: cifs: check for NULL last_entry before calling cifs_save_resume_key Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer checks at the top. It turns out that at least one of those NULL pointer checks is needed after all. When the LastNameOffset in a FIND reply appears to be beyond the end of the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry to NULL. Since eaf35b1, the code will now oops in this situation. Fix this by having the callers check for a NULL last entry pointer before calling cifs_save_resume_key. No change is needed for the call site in cifs_readdir as it's not reachable with a NULL current_entry pointer. This should fix: https://bugzilla.redhat.com/show_bug.cgi?id=750247 Cc: stable@vger.kernel.org Cc: Christoph Hellwig Reported-by: Adam G. Metzler Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 5de03ec..a090bbe 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -554,7 +554,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, rc); return rc; } - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); } while ((index_to_find >= cifsFile->srch_inf.index_of_last_entry) && @@ -562,7 +565,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, cFYI(1, "calling findnext2"); rc = CIFSFindNext(xid, pTcon, cifsFile->netfid, &cifsFile->srch_inf); - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); if (rc) return -ENOENT; } -- cgit v0.10.2 From 905ad269c55fc62bee3da29f7b1d1efeba8aa1e1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Dec 2011 23:20:45 -0500 Subject: procfs: fix a vfsmount longterm reference leak kern_mount() doesn't pair with plain mntput()... Signed-off-by: Al Viro diff --git a/fs/proc/root.c b/fs/proc/root.c index 9a8a2b7..03102d9 100644 --- a/fs/proc/root.c +++ b/fs/proc/root.c @@ -91,20 +91,18 @@ static struct file_system_type proc_fs_type = { void __init proc_root_init(void) { - struct vfsmount *mnt; int err; proc_init_inodecache(); err = register_filesystem(&proc_fs_type); if (err) return; - mnt = kern_mount_data(&proc_fs_type, &init_pid_ns); - if (IS_ERR(mnt)) { + err = pid_ns_prepare_proc(&init_pid_ns); + if (err) { unregister_filesystem(&proc_fs_type); return; } - init_pid_ns.proc_mnt = mnt; proc_symlink("mounts", NULL, "self/mounts"); proc_net_init(); @@ -209,5 +207,5 @@ int pid_ns_prepare_proc(struct pid_namespace *ns) void pid_ns_release_proc(struct pid_namespace *ns) { - mntput(ns->proc_mnt); + kern_unmount(ns->proc_mnt); } -- cgit v0.10.2 From 6f686574cccc2ef66fb38e41f19cedd81e7b4504 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Dec 2011 00:38:50 -0500 Subject: ... and the same kind of leak for mqueue Signed-off-by: Al Viro diff --git a/ipc/mqueue.c b/ipc/mqueue.c index 2e0ecfc..5b4293d 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -1269,7 +1269,7 @@ void mq_clear_sbinfo(struct ipc_namespace *ns) void mq_put_mnt(struct ipc_namespace *ns) { - mntput(ns->mq_mnt); + kern_unmount(ns->mq_mnt); } static int __init init_mqueue_fs(void) @@ -1291,11 +1291,9 @@ static int __init init_mqueue_fs(void) spin_lock_init(&mq_lock); - init_ipc_ns.mq_mnt = kern_mount_data(&mqueue_fs_type, &init_ipc_ns); - if (IS_ERR(init_ipc_ns.mq_mnt)) { - error = PTR_ERR(init_ipc_ns.mq_mnt); + error = mq_init_ns(&init_ipc_ns); + if (error) goto out_filesystem; - } return 0; diff --git a/ipc/msgutil.c b/ipc/msgutil.c index 8b5ce5d3..5652101 100644 --- a/ipc/msgutil.c +++ b/ipc/msgutil.c @@ -27,11 +27,6 @@ DEFINE_SPINLOCK(mq_lock); */ struct ipc_namespace init_ipc_ns = { .count = ATOMIC_INIT(1), -#ifdef CONFIG_POSIX_MQUEUE - .mq_queues_max = DFLT_QUEUESMAX, - .mq_msg_max = DFLT_MSGMAX, - .mq_msgsize_max = DFLT_MSGSIZEMAX, -#endif .user_ns = &init_user_ns, }; -- cgit v0.10.2 From e8c7106280a305e1ff2a3a8a4dfce141469fb039 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 18 Nov 2011 13:09:11 +0000 Subject: x86, efi: Calling __pa() with an ioremap()ed address is invalid If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [] ? page_is_ram+0x1a/0x40 [] reserve_memtype+0xdf/0x2f0 [] set_memory_uc+0x49/0xa0 [] efi_enter_virtual_mode+0x1c2/0x3aa [] start_kernel+0x291/0x2f2 [] ? loglevel+0x1b/0x1b [] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 908b969..c954703 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,6 +53,13 @@ */ #define E820_RESERVED_KERN 128 +/* + * Address ranges that need to be mapped by the kernel direct + * mapping. This is used to make sure regions such as + * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). + */ +#define E820_RESERVED_EFI 129 + #ifndef __ASSEMBLY__ #include struct e820entry { @@ -115,6 +122,7 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif +extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 7093e4a..b8d8bfc 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,8 +33,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) - #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -84,9 +82,6 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) -extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, - u32 type); - #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 303a0e4..65ffd11 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,6 +135,7 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: + case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -783,7 +784,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index cf0ef98..9a9e40f 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,6 +691,8 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { + unsigned long end_pfn; + #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -932,7 +934,24 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<>PAGE_SHIFT, E820_RESERVED_EFI); + if (efi_end > max_low_pfn) + end_pfn = efi_end; + } +#endif + + max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; #ifdef CONFIG_X86_64 diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 37718f0..c9718a1 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -323,10 +323,13 @@ static void __init do_add_efi_memmap(void) case EFI_UNUSABLE_MEMORY: e820_type = E820_UNUSABLE; break; + case EFI_RUNTIME_SERVICES_DATA: + e820_type = E820_RESERVED_EFI; + break; default: /* * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE - * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO + * EFI_MEMORY_MAPPED_IO * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE */ e820_type = E820_RESERVED; @@ -671,10 +674,21 @@ void __init efi_enter_virtual_mode(void) end_pfn = PFN_UP(end); if (end_pfn <= max_low_pfn_mapped || (end_pfn > (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) + && end_pfn <= max_pfn_mapped)) { va = __va(md->phys_addr); - else - va = efi_ioremap(md->phys_addr, size, md->type); + + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = (u64) (unsigned long)va; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + } else { + if (!(md->attribute & EFI_MEMORY_WB)) + va = ioremap_nocache(md->phys_addr, size); + else + va = ioremap_cache(md->phys_addr, size); + } md->virt_addr = (u64) (unsigned long) va; @@ -684,13 +698,6 @@ void __init efi_enter_virtual_mode(void) continue; } - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac3aa54..312250c 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,20 +80,3 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } - -void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, - u32 type) -{ - unsigned long last_map_pfn; - - if (type == EFI_MEMORY_MAPPED_IO) - return ioremap(phys_addr, size); - - last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); - if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { - unsigned long top = last_map_pfn << PAGE_SHIFT; - efi_ioremap(top, size - (top - phys_addr), type); - } - - return (void __iomem *)__va(phys_addr); -} -- cgit v0.10.2 From c0d96aed8c6dd925afe9ea35491a0cd458642a86 Mon Sep 17 00:00:00 2001 From: Jason Chen Date: Wed, 30 Nov 2011 11:34:27 +0800 Subject: MXC PWM: should active during DOZE/WAIT/DBG mode Signed-off-by: Jason Chen Signed-off-by: Sascha Hauer Cc: stable@kernel.org diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea..845de59 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; -- cgit v0.10.2 From 16b3647d333a18141fc9d172e89a142250be0c57 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:06 +0800 Subject: ARM: mx5: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31a..64bbfce 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f77..237bdec 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845..d42132a 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v0.10.2 From 300a47b4378a3b2e7c2a423b0aa4d75fc78987d3 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 9 Dec 2011 10:46:21 +0800 Subject: ARM: imx: fix cpufreq build errors CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96..adbff70 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include #include #include #include -- cgit v0.10.2 From 847a2ee7392e7d3278f9b82c4b503744c72ee463 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 10:28:11 +0800 Subject: arm/imx: fix power button on imx51 babbage board Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c837603..24994bb 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); -- cgit v0.10.2 From b2c1639135c0fc1560f3fe9a3a83f2c8265a9e02 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 8 Dec 2011 20:21:40 -0800 Subject: MAINTAINERS: Update amd-iommu F: patterns Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/") moved the files, update the patterns. CC: Ohad Ben-Cohen CC: Joerg Roedel Signed-off-by: Joe Perches Signed-off-by: Joerg Roedel diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..c267601 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -511,8 +511,8 @@ M: Joerg Roedel L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported -F: arch/x86/kernel/amd_iommu*.c -F: arch/x86/include/asm/amd_iommu*.h +F: drivers/iommu/amd_iommu*.[ch] +F: include/linux/amd-iommu.h AMD MICROCODE UPDATE SUPPORT M: Andreas Herrmann -- cgit v0.10.2 From 635697c663f38106063d5659f0cf2e45afcd4bb5 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:51 -0800 Subject: vmscan: fix initial shrinker size handling A shrinker function can return -1, means that it cannot do anything without a risk of deadlock. For example prune_super() does this if it cannot grab a superblock refrence, even if nr_to_scan=0. Currently we interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan' according to this. So the next time around this shrinker can cause really big pressure. Let's skip such shrinkers instead. Also make total_scan signed, otherwise the check (total_scan < 0) below never works. Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index a1893c0..f525544 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -247,14 +247,18 @@ unsigned long shrink_slab(struct shrink_control *shrink, list_for_each_entry(shrinker, &shrinker_list, list) { unsigned long long delta; - unsigned long total_scan; - unsigned long max_pass; + long total_scan; + long max_pass; int shrink_ret = 0; long nr; long new_nr; long batch_size = shrinker->batch ? shrinker->batch : SHRINK_BATCH; + max_pass = do_shrinker_shrink(shrinker, shrink, 0); + if (max_pass <= 0) + continue; + /* * copy the current shrinker scan count into a local variable * and zero it so that other concurrent shrinker invocations @@ -265,7 +269,6 @@ unsigned long shrink_slab(struct shrink_control *shrink, } while (cmpxchg(&shrinker->nr, nr, 0) != nr); total_scan = nr; - max_pass = do_shrinker_shrink(shrinker, shrink, 0); delta = (4 * nr_pages_scanned) / shrinker->seeks; delta *= max_pass; do_div(delta, lru_pages + 1); -- cgit v0.10.2 From 83aeeada7c69f35e5100b27ec354335597a7a488 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:54 -0800 Subject: vmscan: use atomic-long for shrinker batching Use atomic-long operations instead of looping around cmpxchg(). [akpm@linux-foundation.org: massage atomic.h inclusions] Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/fs.h b/include/linux/fs.h index 019dc55..e0bc4ff 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -393,8 +393,8 @@ struct inodes_stat_t { #include #include #include -#include #include +#include #include diff --git a/include/linux/mm.h b/include/linux/mm.h index 3dc3a8c..4baadd1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index a83833a..07ceb97 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -35,7 +35,7 @@ struct shrinker { /* These are for internal use */ struct list_head list; - long nr; /* objs pending delete */ + atomic_long_t nr_in_batch; /* objs pending delete */ }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ extern void register_shrinker(struct shrinker *); diff --git a/mm/vmscan.c b/mm/vmscan.c index f525544..f54a05b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -183,7 +183,7 @@ static unsigned long zone_nr_lru_pages(struct zone *zone, */ void register_shrinker(struct shrinker *shrinker) { - shrinker->nr = 0; + atomic_long_set(&shrinker->nr_in_batch, 0); down_write(&shrinker_rwsem); list_add_tail(&shrinker->list, &shrinker_list); up_write(&shrinker_rwsem); @@ -264,9 +264,7 @@ unsigned long shrink_slab(struct shrink_control *shrink, * and zero it so that other concurrent shrinker invocations * don't also do this scanning work. */ - do { - nr = shrinker->nr; - } while (cmpxchg(&shrinker->nr, nr, 0) != nr); + nr = atomic_long_xchg(&shrinker->nr_in_batch, 0); total_scan = nr; delta = (4 * nr_pages_scanned) / shrinker->seeks; @@ -328,12 +326,11 @@ unsigned long shrink_slab(struct shrink_control *shrink, * manner that handles concurrent updates. If we exhausted the * scan, there is no need to do an update. */ - do { - nr = shrinker->nr; - new_nr = total_scan + nr; - if (total_scan <= 0) - break; - } while (cmpxchg(&shrinker->nr, nr, new_nr) != nr); + if (total_scan > 0) + new_nr = atomic_long_add_return(total_scan, + &shrinker->nr_in_batch); + else + new_nr = atomic_long_read(&shrinker->nr_in_batch); trace_mm_shrink_slab_end(shrinker, shrink_ret, nr, new_nr); } -- cgit v0.10.2 From b53fc7c2974a50913f49e1d800fe904a28c338e3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 8 Dec 2011 14:33:56 -0800 Subject: fs/proc/meminfo.c: fix compilation error Fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index 5861741..80e4645 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -131,12 +131,13 @@ static int meminfo_proc_show(struct seq_file *m, void *v) K(i.freeswap), K(global_page_state(NR_FILE_DIRTY)), K(global_page_state(NR_WRITEBACK)), - K(global_page_state(NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + K(global_page_state(NR_ANON_PAGES) + global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + K(global_page_state(NR_ANON_PAGES)), #endif - ), K(global_page_state(NR_FILE_MAPPED)), K(global_page_state(NR_SHMEM)), K(global_page_state(NR_SLAB_RECLAIMABLE) + -- cgit v0.10.2 From 1dfb059b9438633b0546c5431538a47f6ed99028 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 8 Dec 2011 14:33:57 -0800 Subject: thp: reduce khugepaged freezing latency khugepaged can sometimes cause suspend to fail, requiring that the user retry the suspend operation. Use wait_event_freezable_timeout() instead of schedule_timeout_interruptible() to avoid missing freezer wakeups. A try_to_freeze() would have been needed in the khugepaged_alloc_hugepage tight loop too in case of the allocation failing repeatedly, and wait_event_freezable_timeout will provide it too. khugepaged would still freeze just fine by trying again the next minute but it's better if it freezes immediately. Reported-by: Jiri Slaby Signed-off-by: Andrea Arcangeli Tested-by: Jiri Slaby Cc: Tejun Heo Cc: Oleg Nesterov Cc: "Srivatsa S. Bhat" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 4298aba..36b3d98 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2259,12 +2259,8 @@ static void khugepaged_do_scan(struct page **hpage) static void khugepaged_alloc_sleep(void) { - DEFINE_WAIT(wait); - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_alloc_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_alloc_sleep_millisecs)); } #ifndef CONFIG_NUMA @@ -2313,14 +2309,10 @@ static void khugepaged_loop(void) if (unlikely(kthread_should_stop())) break; if (khugepaged_has_work()) { - DEFINE_WAIT(wait); if (!khugepaged_scan_sleep_millisecs) continue; - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_scan_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_scan_sleep_millisecs)); } else if (khugepaged_enabled()) wait_event_freezable(khugepaged_wait, khugepaged_wait_event()); -- cgit v0.10.2 From 1de8ad43d0048963d0a0adf14bb046340426b1e4 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 8 Dec 2011 14:34:00 -0800 Subject: CREDITS: update Kees's expired fingerprint and fix details Small clean-up for my CREDITS entry; the GPG fingerprint was not up to date, so I fixed other details at the same time too. Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/CREDITS b/CREDITS index 07e32a87..44fce98 100644 --- a/CREDITS +++ b/CREDITS @@ -688,10 +688,13 @@ S: Oxfordshire, UK. N: Kees Cook E: kees@outflux.net -W: http://outflux.net/ -P: 1024D/17063E6D 9FA3 C49C 23C9 D1BC 2E30 1975 1FFF 4BA9 1706 3E6D -D: Minor updates to SCSI types, added /proc/pid/maps protection +E: kees@ubuntu.com +E: keescook@chromium.org +W: http://outflux.net/blog/ +P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E 6E13 8972 F4DF DC6D C026 +D: Various security things, bug fixes, and documentation. S: (ask for current address) +S: Portland, Oregon S: USA N: Robin Cornelius -- cgit v0.10.2 From 2dbcd05f1e9e0932833d16dab1696176fc164b07 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 8 Dec 2011 14:34:02 -0800 Subject: drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi Cc: Alessandro Zummo Acked-by: Kukjin Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 7639ab9..5b979d9 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -202,7 +202,6 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) void __iomem *base = s3c_rtc_base; int year = tm->tm_year - 100; - clk_enable(rtc_clk); pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n", 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); @@ -214,6 +213,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) return -EINVAL; } + clk_enable(rtc_clk); writeb(bin2bcd(tm->tm_sec), base + S3C2410_RTCSEC); writeb(bin2bcd(tm->tm_min), base + S3C2410_RTCMIN); writeb(bin2bcd(tm->tm_hour), base + S3C2410_RTCHOUR); -- cgit v0.10.2 From c193c82f054195aa352ccbef91afc28446e5a30e Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 8 Dec 2011 14:34:10 -0800 Subject: memcg: update maintainers More players joined to memory cgroup developments and Johannes' great work changed internal design of memory cgroup dramatically. And he will do more works. Michal Hokko did many bug fixes and know memory cgroup very well. Daisuke Nishimura helped us very much but he seems busy now. Thanks to his works. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Acked-by: Johannes Weiner Acked-by: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index b4f1802..6751a36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4302,8 +4302,9 @@ F: include/linux/mm.h F: mm/ MEMORY RESOURCE CONTROLLER +M: Johannes Weiner +M: Michal Hocko M: Balbir Singh -M: Daisuke Nishimura M: KAMEZAWA Hiroyuki L: cgroups@vger.kernel.org L: linux-mm@kvack.org -- cgit v0.10.2 From 09dc3cf93f7d16fdd37a0ad8486faebb5e2769ec Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 8 Dec 2011 14:34:13 -0800 Subject: printk: avoid double lock acquire Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race") introduced another silly bug where we would want to acquire an already held lock. Avoid this. Reported-by: Andrea Arcangeli Signed-off-by: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/printk.c b/kernel/printk.c index 1455a0d..7982a0a 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1293,10 +1293,11 @@ again: raw_spin_lock(&logbuf_lock); if (con_start != log_end) retry = 1; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + if (retry && console_trylock()) goto again; - raw_spin_unlock_irqrestore(&logbuf_lock, flags); if (wake_klogd) wake_up_klogd(); } -- cgit v0.10.2 From b6999b19120931ede364fa3b685e698a61fed31d Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:16 -0800 Subject: thp: add compound tail page _mapcount when mapped With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index ea30585..dd74e46 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v0.10.2 From 58a84aa92723d1ac3e1cc4e3b0ff49291663f7e1 Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:18 -0800 Subject: thp: set compound tail page _count to zero Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all page_tail->_count zero at all times. But the current kernel does not set page_tail->_count to zero if a 1GB page is utilized. So when an IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a tail page's _count does not equal zero. kernel BUG at include/linux/mm.h:386! invalid opcode: 0000 [#1] SMP Call Trace: gup_pud_range+0xb8/0x19d get_user_pages_fast+0xcb/0x192 ? trace_hardirqs_off+0xd/0xf hva_to_pfn+0x119/0x2f2 gfn_to_pfn_memslot+0x2c/0x2e kvm_iommu_map_pages+0xfd/0x1c1 kvm_iommu_map_memslots+0x7c/0xbd kvm_iommu_map_guest+0xaa/0xbf kvm_vm_ioctl_assigned_device+0x2ef/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP gup_huge_pud+0xf2/0x159 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bb28a5f..73f17c0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -576,6 +576,7 @@ static void prep_compound_gigantic_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) { __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9dd443d..850009a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -356,8 +356,8 @@ void prep_compound_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++) { struct page *p = page + i; - __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } -- cgit v0.10.2 From 09761333ed47e899cc1482c13090b95f3f711971 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Thu, 8 Dec 2011 14:34:20 -0800 Subject: mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages Avoid unlocking and unlocked page if we failed to lock it. Signed-off-by: Hillf Danton Cc: Naoya Horiguchi Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/migrate.c b/mm/migrate.c index 578e291..177aca4 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -871,9 +871,9 @@ static int unmap_and_move_huge_page(new_page_t get_new_page, if (anon_vma) put_anon_vma(anon_vma); -out: unlock_page(hpage); +out: if (rc != -EAGAIN) { list_del(&hpage->lru); put_page(hpage); -- cgit v0.10.2 From d021563888312018ca65681096f62e36c20e63cc Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:27 -0800 Subject: mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks setup_zone_migrate_reserve() expects that zone->start_pfn starts at pageblock_nr_pages aligned pfn otherwise we could access beyond an existing memblock resulting in the following panic if CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid: IP: [] setup_zone_migrate_reserve+0xcd/0x180 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[] EFLAGS: 00010006 CPU: 0 EIP is at setup_zone_migrate_reserve+0xcd/0x180 EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000 ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000) Call Trace: [] __setup_per_zone_wmarks+0xec/0x160 [] setup_per_zone_wmarks+0xf/0x20 [] init_per_zone_wmark_min+0x27/0x86 [] do_one_initcall+0x2b/0x160 [] kernel_init+0xbe/0x157 [] kernel_thread_helper+0x6/0xd Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f EIP: [] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58 CR2: 00000000000012b4 We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because highstart_pfn = 0x36ffe. The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE"). Make sure that start_pfn is always aligned to pageblock_nr_pages to ensure that pfn_valid s always called at the start of each pageblock. Architectures with holes in pageblocks will be correctly handled by pfn_valid_within in pageblock_is_reserved. Signed-off-by: Michal Hocko Signed-off-by: Mel Gorman Tested-by: Dang Bo Reviewed-by: KAMEZAWA Hiroyuki Cc: Andrea Arcangeli Cc: David Rientjes Cc: Arve Hjnnevg Cc: KOSAKI Motohiro Cc: John Stultz Cc: Dave Hansen Cc: [3.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 850009a..2b8ba3a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3377,9 +3377,15 @@ static void setup_zone_migrate_reserve(struct zone *zone) unsigned long block_migratetype; int reserve; - /* Get the start pfn, end pfn and the number of blocks to reserve */ + /* + * Get the start pfn, end pfn and the number of blocks to reserve + * We have to be careful to be aligned to pageblock_nr_pages to + * make sure that we always check pfn_valid for the first page in + * the block. + */ start_pfn = zone->zone_start_pfn; end_pfn = start_pfn + zone->spanned_pages; + start_pfn = roundup(start_pfn, pageblock_nr_pages); reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >> pageblock_order; -- cgit v0.10.2 From 1368edf0647ac112d8cfa6ce47257dc950c50f5c Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 8 Dec 2011 14:34:30 -0800 Subject: mm: vmalloc: check for page allocation failure before vmlist insertion Commit f5252e00 ("mm: avoid null pointer access in vm_struct via /proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after it is fully initialised. Unfortunately, it did not check that __vmalloc_area_node() successfully populated the area. In the event of allocation failure, the vmalloc area is freed but the pointer to freed memory is inserted into the vmlist leading to a a crash later in get_vmalloc_info(). This patch adds a check for ____vmalloc_area_node() failure within __vmalloc_node_range. It does not use "goto fail" as in the previous error path as a warning was already displayed by __vmalloc_area_node() before it called vfree in its failure path. Credit goes to Luciano Chavez for doing all the real work of identifying exactly where the problem was. Signed-off-by: Mel Gorman Reported-by: Luciano Chavez Tested-by: Luciano Chavez Reviewed-by: Rik van Riel Acked-by: David Rientjes Cc: [3.1.x+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 3231bf3..1d8b32f 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1633,6 +1633,8 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, goto fail; addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller); + if (!addr) + return NULL; /* * In this function, newly allocated vm_struct is not added -- cgit v0.10.2 From 2a95ea6c0d129b4568fb64e1deda16ceb20e6636 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:32 -0800 Subject: procfs: do not overflow get_{idle,iowait}_time for nohz Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and iowait times") we are reporting idle/io_wait time also while a CPU is tickless. We rely on get_{idle,iowait}_time functions to retrieve proper data. These functions, however, use usecs_to_cputime to translate micro seconds time to cputime64_t. This is just an alias to usecs_to_jiffies which reduces the data type from u64 to unsigned int and also checks whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET) and returns MAX_JIFFY_OFFSET in that case. When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300 it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for >3000s! until we overflow unsigned int. Just for reference CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and CONFIG_HZ_1000 ~2s. This results in a bug when people saw [h]top going mad reporting 100% CPU usage even though there was basically no CPU load. The reason was simply that /proc/stat stopped reporting idle/io_wait changes (and reported MAX_JIFFY_OFFSET) and so the only change happening was for user system time. Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision to 32b type and it is much more appropriate for cumulative time values (unlike usecs_to_jiffies which intended for timeout calculations). Signed-off-by: Michal Hocko Tested-by: Artem S. Tashkinov Cc: Dave Jones Cc: Arnd Bergmann Cc: Alexey Dobriyan Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 42b274d..2a30d67 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -32,7 +32,7 @@ static cputime64_t get_idle_time(int cpu) idle = kstat_cpu(cpu).cpustat.idle; idle = cputime64_add(idle, arch_idle_time(cpu)); } else - idle = usecs_to_cputime(idle_time); + idle = nsecs_to_jiffies64(1000 * idle_time); return idle; } @@ -46,7 +46,7 @@ static cputime64_t get_iowait_time(int cpu) /* !NO_HZ so we can rely on cpustat.iowait */ iowait = kstat_cpu(cpu).cpustat.iowait; else - iowait = usecs_to_cputime(iowait_time); + iowait = nsecs_to_jiffies64(1000 * iowait_time); return iowait; } -- cgit v0.10.2 From ceb96398127f3388cb5815b2ab550196e2be5d68 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:35 -0800 Subject: rapidio/tsi721: switch to dma_zalloc_coherent Replace the pair dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2 Signed-off-by: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 5225930..514c28c 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -851,14 +851,12 @@ static int tsi721_doorbell_init(struct tsi721_device *priv) INIT_WORK(&priv->idb_work, tsi721_db_dpc); /* Allocate buffer for inbound doorbells queue */ - priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, &priv->idb_dma, GFP_KERNEL); if (!priv->idb_base) return -ENOMEM; - memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE); - dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", priv->idb_base, (unsigned long long)priv->idb_dma); @@ -904,7 +902,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) */ /* Allocate space for DMA descriptors */ - bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, bd_num * sizeof(struct tsi721_dma_desc), &bd_phys, GFP_KERNEL); if (!bd_ptr) @@ -913,8 +911,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].bd_phys = bd_phys; priv->bdma[chnum].bd_base = bd_ptr; - memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc)); - dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", bd_ptr, (unsigned long long)bd_phys); @@ -922,7 +918,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? bd_num : TSI721_DMA_MINSTSSZ; sts_size = roundup_pow_of_two(sts_size); - sts_ptr = dma_alloc_coherent(&priv->pdev->dev, + sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, sts_size * sizeof(struct tsi721_dma_sts), &sts_phys, GFP_KERNEL); if (!sts_ptr) { @@ -938,8 +934,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].sts_base = sts_ptr; priv->bdma[chnum].sts_size = sts_size; - memset(sts_ptr, 0, sts_size); - dev_dbg(&priv->pdev->dev, "desc status FIFO @ %p (phys = %llx) size=0x%x\n", sts_ptr, (unsigned long long)sts_phys, sts_size); @@ -1400,7 +1394,7 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, /* Outbound message descriptor status FIFO allocation */ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); - priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); @@ -1412,9 +1406,6 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, goto out_desc; } - memset(priv->omsg_ring[mbox].sts_base, 0, - entries * sizeof(struct tsi721_dma_sts)); - /* * Configure Outbound Messaging Engine */ -- cgit v0.10.2 From b439e66f04bff6476c5d4bae6a52ab93fbb9a8f4 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:36 -0800 Subject: rapidio/tsi721: fix mailbox resource reporting Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox resources has to be properly reported to allow use of all available mailboxes (initial version reports only MBOX0). This patch is applicable to kernel versions staring from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 514c28c..83ac8728 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2107,8 +2107,8 @@ static int __devinit tsi721_setup_mport(struct tsi721_device *priv) INIT_LIST_HEAD(&mport->dbells); rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); strcpy(mport->name, "Tsi721 mport"); /* Hook up interrupt handler */ -- cgit v0.10.2 From 1cee22b7f385b6c4f716846203a96e1f302132aa Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:42 -0800 Subject: rapidio/tsi721: modify PCIe capability settings Modify initialization of PCIe capability registers in Tsi721 mport driver: - change Completion Timeout value to avoid unexpected data transfer aborts during intensive traffic. - replace hardcoded offset of PCIe capability block by making it use the common function. This patch is applicable to kernel versions starting from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 83ac8728..691b1ab 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2154,7 +2154,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i; + int i, cap; int err; u32 regval; @@ -2262,10 +2262,20 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); } - /* Clear "no snoop" and "relaxed ordering" bits. */ - pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val); - regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN); - pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval); + cap = pci_pcie_cap(pdev); + BUG_ON(cap == 0); + + /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL, ®val); + regval &= ~(PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN | + PCI_EXP_DEVCTL_NOSNOOP_EN); + regval |= 0x2 << MAX_READ_REQUEST_SZ_SHIFT; + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL, regval); + + /* Adjust PCIe completion timeout. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL2, ®val); + regval &= ~(0x0f); + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL2, regval | 0x2); /* * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h index 58be4de..822e54c 100644 --- a/drivers/rapidio/devices/tsi721.h +++ b/drivers/rapidio/devices/tsi721.h @@ -72,6 +72,8 @@ #define TSI721_MSIXPBA_OFFSET 0x2a000 #define TSI721_PCIECFG_EPCTL 0x400 +#define MAX_READ_REQUEST_SZ_SHIFT 12 + /* * Event Management Registers */ -- cgit v0.10.2 From 031af165b1cd295ef04d2bfbcae9bc3cb9180735 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 8 Dec 2011 14:34:44 -0800 Subject: sys_getppid: add missing rcu_dereference In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines Cc: Thomas Gleixner Cc: Pavel Emelyanov Cc: Oleg Nesterov Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/timer.c b/kernel/timer.c index dbaa624..9c3c62b 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1368,7 +1368,7 @@ SYSCALL_DEFINE0(getppid) int pid; rcu_read_lock(); - pid = task_tgid_vnr(current->real_parent); + pid = task_tgid_vnr(rcu_dereference(current->real_parent)); rcu_read_unlock(); return pid; -- cgit v0.10.2 From 5dbc8fca8ef5d719014f22345d990e957dcfc692 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 9 Dec 2011 11:07:37 -0500 Subject: Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror btrfs_end_bio checks the number of errors on a bio against the max number of errors allowed before sending any EIOs up to the higher levels. If we got enough copies of the bio done for a given raid level, it is supposed to clear the bio error flag and return success. We have pointers to the original bio sent down by the higher layers and pointers to any cloned bios we made for raid purposes. If the original bio happens to be the one that got an io error, but not the last one to finish, it might not have the BIO_UPTODATE bit set. Then, when the last bio does finish, we'll call bio_end_io on the original bio. It won't have the uptodate bit set and we'll end up sending EIO to the higher layers. We already had a check for this, it just was conditional on getting the IO error on the very last bio. Make the check unconditional so we eat the EIOs properly. Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0a8c8f8..91ea57a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3258,7 +3258,7 @@ static void btrfs_end_bio(struct bio *bio, int err) */ if (atomic_read(&bbio->error) > bbio->max_errors) { err = -EIO; - } else if (err) { + } else { /* * this bio is actually up to date, we didn't * go over the max number of errors -- cgit v0.10.2 From dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 9 Dec 2011 15:09:32 -0800 Subject: Linux 3.2-rc5 diff --git a/Makefile b/Makefile index 12aafc2..d1ea73f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From 6d3e32e63f1fb47b3ba104d13dfac116df7b2bbb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 8 Dec 2011 12:10:50 +0000 Subject: x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware efi_call_phys_prelog() sets up a 1:1 mapping of the physical address range in swapper_pg_dir. Instead of replacing then restoring entries in swapper_pg_dir we should be using initial_page_table which already contains the 1:1 mapping. It's safe to blindly switch back to swapper_pg_dir in the epilog because the physical EFI routines are only called before efi_enter_virtual_mode(), e.g. before any user processes have been forked. Therefore, we don't need to track which pgd was in %cr3 when we entered the prelog. The previous code actually contained a bug because it assumed that the kernel was loaded at a physical address within the first 8MB of ram, usually at 0x100000. However, this isn't the case with a CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in the physical address space. Also delete the ancient (and bogus) comments about the page table being restored after the lock is released. There is no locking. Cc: Matthew Garrett Cc: Darrent Hart Signed-off-by: Matt Fleming Link: http://lkml.kernel.org/r/1323346250.3894.74.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c index e36bf71..40e4469 100644 --- a/arch/x86/platform/efi/efi_32.c +++ b/arch/x86/platform/efi/efi_32.c @@ -39,43 +39,14 @@ */ static unsigned long efi_rt_eflags; -static pgd_t efi_bak_pg_dir_pointer[2]; void efi_call_phys_prelog(void) { - unsigned long cr4; - unsigned long temp; struct desc_ptr gdt_descr; local_irq_save(efi_rt_eflags); - /* - * If I don't have PAE, I should just duplicate two entries in page - * directory. If I have PAE, I just need to duplicate one entry in - * page directory. - */ - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - swapper_pg_dir[0].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - } else { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - efi_bak_pg_dir_pointer[1].pgd = - swapper_pg_dir[pgd_index(0x400000)].pgd; - swapper_pg_dir[pgd_index(0)].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - temp = PAGE_OFFSET + 0x400000; - swapper_pg_dir[pgd_index(0x400000)].pgd = - swapper_pg_dir[pgd_index(temp)].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(initial_page_table); __flush_tlb_all(); gdt_descr.address = __pa(get_cpu_gdt_table(0)); @@ -85,28 +56,13 @@ void efi_call_phys_prelog(void) void efi_call_phys_epilog(void) { - unsigned long cr4; struct desc_ptr gdt_descr; gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - } else { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - swapper_pg_dir[pgd_index(0x400000)].pgd = - efi_bak_pg_dir_pointer[1].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(swapper_pg_dir); __flush_tlb_all(); local_irq_restore(efi_rt_eflags); -- cgit v0.10.2 From 37d5993c5cc9bc83762ae1b5bd287438022e8afe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 10 Dec 2011 20:38:32 +0800 Subject: ASoC: Fix WM8996 24.576MHz clock operation Record the clock after the divider as that is what all SYSCLK users see. Without this the other clock configuration in the device comes out at half rate. Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 645c980..a33b04d 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1968,6 +1968,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, break; case 24576000: ratediv = WM8996_SYSCLK_DIV; + wm8996->sysclk /= 2; case 12288000: snd_soc_update_bits(codec, WM8996_AIF_RATE, WM8996_SYSCLK_RATE, WM8996_SYSCLK_RATE); -- cgit v0.10.2 From e58f516ff4730c4047c3f104b061f7a03e9a263c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 11 Nov 2011 16:28:05 +0100 Subject: mmc: mxcmmc: fix falling back to PIO When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer Cc: Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 325ea61..8e0fbe9 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -732,6 +732,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) "failed to config DMA channel. Falling back to PIO\n"); dma_release_channel(host->dma); host->do_dma = 0; + host->dma = NULL; } } -- cgit v0.10.2 From 7833c66b2d764a3c883c2f5cc60cd8a6266dae15 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Fri, 11 Nov 2011 19:54:53 -0500 Subject: mmc: Add module.h include to sdhci-cns3xxx.c Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 4b920b7..87b6f07 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" -- cgit v0.10.2 From 6de5fc9cf7de334912de4cfd2d06eb2d744d2afe Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Thu, 3 Nov 2011 09:44:12 +0100 Subject: mmc: core: Add quirk for long data read time Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index a1cb21f..1e0e27c 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1606,6 +1606,14 @@ static const struct mmc_fixup blk_fixups[] = MMC_QUIRK_BLK_NO_CMD23), MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc, MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some Micron MMC cards needs longer data read timeout than + * indicated in CSD. + */ + MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + END_FIXUP }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 5278ffb..74a012a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -529,6 +529,18 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_clks = 0; } } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 300ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 300000000; + data->timeout_clks = 0; + } + /* * Some cards need very high timeouts if driven in SPI mode. * The worst observed timeout was 900ms after writing a diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 415f2db..c8ef9bc 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -218,6 +218,7 @@ struct mmc_card { #define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */ #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ +#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 @@ -433,6 +434,11 @@ static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c) return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512; } +static inline int mmc_card_long_read_time(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LONG_READ_TIME; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) -- cgit v0.10.2 From 96a85d548bf960ec8e8a0c3bca2b2e88e41549db Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 4 Nov 2011 16:22:47 +0530 Subject: mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S Acked-by: Ulf Hansson Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index dbf421a..90de9ba3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -883,10 +883,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; - } - if (!err) - card->poweroff_notify_state = MMC_POWERED_ON; + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->poweroff_notify_state = MMC_POWERED_ON; + } /* * Activate high speed (if supported) -- cgit v0.10.2 From a80f16276388a177199204aa5b60f328d4464110 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 15 Nov 2011 11:55:46 +0530 Subject: mmc: core: Fix power_off_notify during suspend The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 74a012a..7ee2e07 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1225,6 +1225,46 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) mmc_host_clk_release(host); } +static void mmc_poweroff_notify(struct mmc_host *host) +{ + struct mmc_card *card; + unsigned int timeout; + unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; + int err = 0; + + card = host->card; + + /* + * Send power notify command only if card + * is mmc and notify state is powered ON + */ + if (card && mmc_card_mmc(card) && + (card->poweroff_notify_state == MMC_POWERED_ON)) { + + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { + notify_type = EXT_CSD_POWER_OFF_SHORT; + timeout = card->ext_csd.generic_cmd6_time; + card->poweroff_notify_state = MMC_POWEROFF_SHORT; + } else { + notify_type = EXT_CSD_POWER_OFF_LONG; + timeout = card->ext_csd.power_off_longtime; + card->poweroff_notify_state = MMC_POWEROFF_LONG; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout); + + if (err && err != -EBADMSG) + pr_err("Device failed to respond within %d poweroff " + "time. Forcefully powering down the device\n", + timeout); + + /* Set the card state to no notification after the poweroff */ + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; + } +} + /* * Apply power to the MMC stack. This is a two-stage process. * First, we enable power to the card without the clock running. @@ -1281,42 +1321,12 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { - struct mmc_card *card; - unsigned int notify_type; - unsigned int timeout; - int err; - mmc_host_clk_hold(host); - card = host->card; host->ios.clock = 0; host->ios.vdd = 0; - if (card && mmc_card_mmc(card) && - (card->poweroff_notify_state == MMC_POWERED_ON)) { - - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { - notify_type = EXT_CSD_POWER_OFF_SHORT; - timeout = card->ext_csd.generic_cmd6_time; - card->poweroff_notify_state = MMC_POWEROFF_SHORT; - } else { - notify_type = EXT_CSD_POWER_OFF_LONG; - timeout = card->ext_csd.power_off_longtime; - card->poweroff_notify_state = MMC_POWEROFF_LONG; - } - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_POWER_OFF_NOTIFICATION, - notify_type, timeout); - - if (err && err != -EBADMSG) - pr_err("Device failed to respond within %d poweroff " - "time. Forcefully powering down the device\n", - timeout); - - /* Set the card state to no notification after the poweroff */ - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; - } + mmc_poweroff_notify(host); /* * Reset ocr mask to be the highest possible voltage supported for @@ -2314,8 +2324,15 @@ int mmc_suspend_host(struct mmc_host *host) * pre-claim the host. */ if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) + if (host->bus_ops->suspend) { + /* + * For eMMC 4.5 device send notify command + * before sleep, because in sleep state eMMC 4.5 + * devices respond to only RESET and AWAKE cmd + */ + mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); + } if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 90de9ba3..d240427 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -876,7 +876,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * set the notification byte in the ext_csd register of device */ if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) && - (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) { + (card->ext_csd.rev >= 6)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_POWER_OFF_NOTIFICATION, EXT_CSD_POWER_ON, -- cgit v0.10.2 From c99872a16fa7642987f30c750dc166674b0d8060 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 17 Nov 2011 13:34:33 +0900 Subject: mmc: core: Fix typo at mmc_card_sleep Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7ee2e07..271efea 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2218,7 +2218,7 @@ int mmc_card_sleep(struct mmc_host *host) mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) + if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep) err = host->bus_ops->sleep(host); mmc_bus_put(host); -- cgit v0.10.2 From f6bc41fb08cbd6943df358437e0af90c91a3caa3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:10:41 +0100 Subject: mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 369366c..d5505f3 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -908,7 +908,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->power) { pm_runtime_put(&host->pd->dev); host->power = false; - if (p->down_pwr) + if (p->down_pwr && ios->power_mode == MMC_POWER_OFF) p->down_pwr(host->pd); } host->state = STATE_IDLE; -- cgit v0.10.2 From f6b8b52c68f6109db4be02b55660258ff503fc3b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:11:45 +0100 Subject: mmc: tmio: fix clock gating on platforms with a .set_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index d85a60c..4208b39 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -798,7 +798,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* start bus clock */ tmio_mmc_clk_start(host); } else if (ios->power_mode != MMC_POWER_UP) { - if (host->set_pwr) + if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && pdata->power) { -- cgit v0.10.2 From 524bfca2b42a7c9dc43af13e1592b21dd1ce3fcc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 18:00:51 +0000 Subject: mmc: sdhci-s3c: Remove old and misprototyped suspend operations Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown Acked-by: Jaehoon Chung Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 3d00e72..cb60c41 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -644,8 +644,6 @@ static int sdhci_s3c_resume(struct platform_device *dev) static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, .remove = __devexit_p(sdhci_s3c_remove), - .suspend = sdhci_s3c_suspend, - .resume = sdhci_s3c_resume, .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", -- cgit v0.10.2 From 49df78074963c97e25debc3c67b72f059111607d Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Wed, 23 Nov 2011 08:43:18 +0530 Subject: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma Acked-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 271efea..950b97d 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2333,6 +2333,8 @@ int mmc_suspend_host(struct mmc_host *host) mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); } + mmc_do_release_host(host); + if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. @@ -2347,7 +2349,6 @@ int mmc_suspend_host(struct mmc_host *host) host->pm_flags = 0; err = 0; } - mmc_do_release_host(host); } else { err = -EBUSY; } -- cgit v0.10.2 From 06c8eb9a9115dbbf1658a79f19f18a887c18119b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Fri, 9 Dec 2011 14:38:11 +0100 Subject: ASoC: mxs: Add missing MODULE_LICENSE("GPL") MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sound driver refuses to load as module, because of the missing MODULE_LICENSE("GPL"). The file header indicates that the driver is indeed published under the GPL. Signed-off-by: Lothar Waßmann Acked-by: Wolfram Sang Signed-off-by: Mark Brown diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index dea5aa4..8646913 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -357,3 +357,5 @@ static void __exit snd_mxs_pcm_exit(void) platform_driver_unregister(&mxs_pcm_driver); } module_exit(snd_mxs_pcm_exit); + +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 9fd369b193dceddd4e9e7f426c229c6104c80e28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Fri, 9 Dec 2011 14:38:12 +0100 Subject: ASoC: mxs: Add appropriate MODULE_ALIAS() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Lothar Waßmann Acked-by: Wolfram Sang Signed-off-by: Mark Brown diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index 8646913..f39d7dd 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -359,3 +359,4 @@ static void __exit snd_mxs_pcm_exit(void) module_exit(snd_mxs_pcm_exit); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-pcm-audio"); diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 7fbeaec..1c57f66 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -171,3 +171,4 @@ module_exit(mxs_sgtl5000_exit); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MXS ALSA SoC Machine driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-sgtl5000"); -- cgit v0.10.2 From 9811ccdfa94b4773c8030569bd8ec75eafa485ac Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 11 Dec 2011 20:32:25 +0100 Subject: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard Acked-by: Nicolas Pitre Cc: stable@kernel.org Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1bdd0ad..8fc2c8f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,6 +902,12 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif if (mdesc->soft_reboot) reboot_setup("s"); @@ -932,12 +938,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif -- cgit v0.10.2 From 62e4a13e602214908341fad068ff91f31aed1a4e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonathan=20Neusch=C3=A4fer?= Date: Sun, 11 Dec 2011 19:15:49 +0100 Subject: ASoC: WM8958: correctly show firmware magic on mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jonathan Neuschäfer Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index 0293763..5a14d5c 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -60,6 +60,8 @@ static int wm8958_dsp2_fw(struct snd_soc_codec *codec, const char *name, } if (memcmp(fw->data, "WMFW", 4) != 0) { + memcpy(&data32, fw->data, sizeof(data32)); + data32 = be32_to_cpu(data32); dev_err(codec->dev, "%s: firmware has bad file magic %08x\n", name, data32); goto err; -- cgit v0.10.2 From 497d496598f411cb7f0690725a0e8b9029cebdb9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 12 Dec 2011 11:26:00 +0800 Subject: ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 65c1248..c664e33 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -209,9 +209,10 @@ static int __devinit hx4700_audio_probe(struct platform_device *pdev) snd_soc_card_hx4700.dev = &pdev->dev; ret = snd_soc_register_card(&snd_soc_card_hx4700); if (ret) - return ret; + gpio_free_array(hx4700_audio_gpios, + ARRAY_SIZE(hx4700_audio_gpios)); - return 0; + return ret; } static int __devexit hx4700_audio_remove(struct platform_device *pdev) -- cgit v0.10.2 From 1c89fe3b51a2f8068f2f9faa9c48584151416583 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 12 Dec 2011 14:01:17 +0800 Subject: ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device For the Asus 1101HA, reporting position by reading the DMA position buffer map seems unstable and often wrong. The reporter says that position_fix=LPIB works much better (although not 100%, but this is probably due to other issues). The controller chip is an Intel Poulsbo 8086:811b (rev 07) controller, and complete alsa-info is available here: https://launchpadlibrarian.net/86691768/alsa-info.txt.1TNwyE5Ea7 Cc: stable@kernel.org (3.0+) BugLink: http://bugs.launchpad.net/bugs/825709 Tested-by: Stefano Lodi Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7d98240..84d11d7 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2507,6 +2507,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS 1101HA", POS_FIX_LPIB), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB), -- cgit v0.10.2 From f44b915d315ff0a7dd362c5c0eac5fbde4cc4411 Mon Sep 17 00:00:00 2001 From: Yu Xu Date: Sat, 10 Dec 2011 00:03:33 +0800 Subject: usb: gadget: storage: release superspeed descriptors. Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index c39d588..1a6f415 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2975,6 +2975,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) fsg_common_put(common); usb_free_descriptors(fsg->function.descriptors); usb_free_descriptors(fsg->function.hs_descriptors); + usb_free_descriptors(fsg->function.ss_descriptors); kfree(fsg); } -- cgit v0.10.2 From b95eb7476e7224baae34f67ae9a09042521e97ff Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Dec 2011 18:23:56 -0800 Subject: usb: renesas_usbhs: typofix: irq_dtch control DTCHE Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 053f86d..ad96a38 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -349,7 +349,7 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) if (mod->irq_attch) intenb1 |= ATTCHE; - if (mod->irq_attch) + if (mod->irq_dtch) intenb1 |= DTCHE; if (mod->irq_sign) -- cgit v0.10.2 From 1115b9e279a23ca0bf7eda7d7697fe20a441304e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Dec 2011 18:24:47 -0800 Subject: usb: renesas_usbhs: add hcd->has_tt for low/full speed Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index bade761..7955de5 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1267,6 +1267,7 @@ int usbhs_mod_host_probe(struct usbhs_priv *priv) dev_err(dev, "Failed to create hcd\n"); return -ENOMEM; } + hcd->has_tt = 1; /* for low/full speed */ pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL); if (!pipe_info) { -- cgit v0.10.2 From b302545744c031eae04a43fb1c56cc17e00a193a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 12 Dec 2011 12:42:12 +0100 Subject: block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jens Axboe diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index ae3e167..89ddab1 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -16,6 +16,8 @@ * handle GCR disks */ +#undef DEBUG + #include #include #include @@ -36,13 +38,11 @@ #include #include -static DEFINE_MUTEX(swim3_mutex); -static struct request_queue *swim3_queue; -static struct gendisk *disks[2]; -static struct request *fd_req; - #define MAX_FLOPPIES 2 +static DEFINE_MUTEX(swim3_mutex); +static struct gendisk *disks[MAX_FLOPPIES]; + enum swim_state { idle, locating, @@ -177,7 +177,6 @@ struct swim3 { struct floppy_state { enum swim_state state; - spinlock_t lock; struct swim3 __iomem *swim3; /* hardware registers */ struct dbdma_regs __iomem *dma; /* DMA controller registers */ int swim3_intr; /* interrupt number for SWIM3 */ @@ -204,8 +203,20 @@ struct floppy_state { int wanted; struct macio_dev *mdev; char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)]; + int index; + struct request *cur_req; }; +#define swim3_err(fmt, arg...) dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#define swim3_warn(fmt, arg...) dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#define swim3_info(fmt, arg...) dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) + +#ifdef DEBUG +#define swim3_dbg(fmt, arg...) dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#else +#define swim3_dbg(fmt, arg...) do { } while(0) +#endif + static struct floppy_state floppy_states[MAX_FLOPPIES]; static int floppy_count = 0; static DEFINE_SPINLOCK(swim3_lock); @@ -224,17 +235,8 @@ static unsigned short write_postamble[] = { 0, 0, 0, 0, 0, 0 }; -static void swim3_select(struct floppy_state *fs, int sel); -static void swim3_action(struct floppy_state *fs, int action); -static int swim3_readbit(struct floppy_state *fs, int bit); -static void do_fd_request(struct request_queue * q); -static void start_request(struct floppy_state *fs); -static void set_timeout(struct floppy_state *fs, int nticks, - void (*proc)(unsigned long)); -static void scan_track(struct floppy_state *fs); static void seek_track(struct floppy_state *fs, int n); static void init_dma(struct dbdma_cmd *cp, int cmd, void *buf, int count); -static void setup_transfer(struct floppy_state *fs); static void act(struct floppy_state *fs); static void scan_timeout(unsigned long data); static void seek_timeout(unsigned long data); @@ -254,18 +256,21 @@ static unsigned int floppy_check_events(struct gendisk *disk, unsigned int clearing); static int floppy_revalidate(struct gendisk *disk); -static bool swim3_end_request(int err, unsigned int nr_bytes) +static bool swim3_end_request(struct floppy_state *fs, int err, unsigned int nr_bytes) { - if (__blk_end_request(fd_req, err, nr_bytes)) - return true; + struct request *req = fs->cur_req; + int rc; - fd_req = NULL; - return false; -} + swim3_dbg(" end request, err=%d nr_bytes=%d, cur_req=%p\n", + err, nr_bytes, req); -static bool swim3_end_request_cur(int err) -{ - return swim3_end_request(err, blk_rq_cur_bytes(fd_req)); + if (err) + nr_bytes = blk_rq_cur_bytes(req); + rc = __blk_end_request(req, err, nr_bytes); + if (rc) + return true; + fs->cur_req = NULL; + return false; } static void swim3_select(struct floppy_state *fs, int sel) @@ -303,50 +308,53 @@ static int swim3_readbit(struct floppy_state *fs, int bit) return (stat & DATA) == 0; } -static void do_fd_request(struct request_queue * q) -{ - int i; - - for(i=0; imdev->media_bay && - check_media_bay(fs->mdev->media_bay) != MB_FD) - continue; - start_request(fs); - } -} - static void start_request(struct floppy_state *fs) { struct request *req; unsigned long x; + swim3_dbg("start request, initial state=%d\n", fs->state); + if (fs->state == idle && fs->wanted) { fs->state = available; wake_up(&fs->wait); return; } while (fs->state == idle) { - if (!fd_req) { - fd_req = blk_fetch_request(swim3_queue); - if (!fd_req) + swim3_dbg("start request, idle loop, cur_req=%p\n", fs->cur_req); + if (!fs->cur_req) { + fs->cur_req = blk_fetch_request(disks[fs->index]->queue); + swim3_dbg(" fetched request %p\n", fs->cur_req); + if (!fs->cur_req) break; } - req = fd_req; -#if 0 - printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", - req->rq_disk->disk_name, req->cmd, - (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer); - printk(" errors=%d current_nr_sectors=%u\n", - req->errors, blk_rq_cur_sectors(req)); + req = fs->cur_req; + + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) { + swim3_dbg("%s", " media bay absent, dropping req\n"); + swim3_end_request(fs, -ENODEV, 0); + continue; + } + +#if 0 /* This is really too verbose */ + swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", + req->rq_disk->disk_name, req->cmd, + (long)blk_rq_pos(req), blk_rq_sectors(req), + req->buffer); + swim3_dbg(" errors=%d current_nr_sectors=%u\n", + req->errors, blk_rq_cur_sectors(req)); #endif if (blk_rq_pos(req) >= fs->total_secs) { - swim3_end_request_cur(-EIO); + swim3_dbg(" pos out of bounds (%ld, max is %ld)\n", + (long)blk_rq_pos(req), (long)fs->total_secs); + swim3_end_request(fs, -EIO, 0); continue; } if (fs->ejected) { - swim3_end_request_cur(-EIO); + swim3_dbg("%s", " disk ejected\n"); + swim3_end_request(fs, -EIO, 0); continue; } @@ -354,7 +362,8 @@ static void start_request(struct floppy_state *fs) if (fs->write_prot < 0) fs->write_prot = swim3_readbit(fs, WRITE_PROT); if (fs->write_prot) { - swim3_end_request_cur(-EIO); + swim3_dbg("%s", " try to write, disk write protected\n"); + swim3_end_request(fs, -EIO, 0); continue; } } @@ -369,7 +378,6 @@ static void start_request(struct floppy_state *fs) x = ((long)blk_rq_pos(req)) % fs->secpercyl; fs->head = x / fs->secpertrack; fs->req_sector = x % fs->secpertrack + 1; - fd_req = req; fs->state = do_transfer; fs->retries = 0; @@ -377,12 +385,14 @@ static void start_request(struct floppy_state *fs) } } +static void do_fd_request(struct request_queue * q) +{ + start_request(q->queuedata); +} + static void set_timeout(struct floppy_state *fs, int nticks, void (*proc)(unsigned long)) { - unsigned long flags; - - spin_lock_irqsave(&fs->lock, flags); if (fs->timeout_pending) del_timer(&fs->timeout); fs->timeout.expires = jiffies + nticks; @@ -390,7 +400,6 @@ static void set_timeout(struct floppy_state *fs, int nticks, fs->timeout.data = (unsigned long) fs; add_timer(&fs->timeout); fs->timeout_pending = 1; - spin_unlock_irqrestore(&fs->lock, flags); } static inline void scan_track(struct floppy_state *fs) @@ -442,40 +451,45 @@ static inline void setup_transfer(struct floppy_state *fs) struct swim3 __iomem *sw = fs->swim3; struct dbdma_cmd *cp = fs->dma_cmd; struct dbdma_regs __iomem *dr = fs->dma; + struct request *req = fs->cur_req; - if (blk_rq_cur_sectors(fd_req) <= 0) { - printk(KERN_ERR "swim3: transfer 0 sectors?\n"); + if (blk_rq_cur_sectors(req) <= 0) { + swim3_warn("%s", "Transfer 0 sectors ?\n"); return; } - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) n = 1; else { n = fs->secpertrack - fs->req_sector + 1; - if (n > blk_rq_cur_sectors(fd_req)) - n = blk_rq_cur_sectors(fd_req); + if (n > blk_rq_cur_sectors(req)) + n = blk_rq_cur_sectors(req); } + + swim3_dbg(" setup xfer at sect %d (of %d) head %d for %d\n", + fs->req_sector, fs->secpertrack, fs->head, n); + fs->scount = n; swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0); out_8(&sw->sector, fs->req_sector); out_8(&sw->nsect, n); out_8(&sw->gap3, 0); out_le32(&dr->cmdptr, virt_to_bus(cp)); - if (rq_data_dir(fd_req) == WRITE) { + if (rq_data_dir(req) == WRITE) { /* Set up 3 dma commands: write preamble, data, postamble */ init_dma(cp, OUTPUT_MORE, write_preamble, sizeof(write_preamble)); ++cp; - init_dma(cp, OUTPUT_MORE, fd_req->buffer, 512); + init_dma(cp, OUTPUT_MORE, req->buffer, 512); ++cp; init_dma(cp, OUTPUT_LAST, write_postamble, sizeof(write_postamble)); } else { - init_dma(cp, INPUT_LAST, fd_req->buffer, n * 512); + init_dma(cp, INPUT_LAST, req->buffer, n * 512); } ++cp; out_le16(&cp->command, DBDMA_STOP); out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); in_8(&sw->error); out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) out_8(&sw->control_bis, WRITE_SECTORS); in_8(&sw->intr); out_le32(&dr->control, (RUN << 16) | RUN); @@ -488,12 +502,16 @@ static inline void setup_transfer(struct floppy_state *fs) static void act(struct floppy_state *fs) { for (;;) { + swim3_dbg(" act loop, state=%d, req_cyl=%d, cur_cyl=%d\n", + fs->state, fs->req_cyl, fs->cur_cyl); + switch (fs->state) { case idle: return; /* XXX shouldn't get here */ case locating: if (swim3_readbit(fs, TRACK_ZERO)) { + swim3_dbg("%s", " locate track 0\n"); fs->cur_cyl = 0; if (fs->req_cyl == 0) fs->state = do_transfer; @@ -511,7 +529,7 @@ static void act(struct floppy_state *fs) break; } if (fs->req_cyl == fs->cur_cyl) { - printk("whoops, seeking 0\n"); + swim3_warn("%s", "Whoops, seeking 0\n"); fs->state = do_transfer; break; } @@ -527,7 +545,9 @@ static void act(struct floppy_state *fs) case do_transfer: if (fs->cur_cyl != fs->req_cyl) { if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_err("Wrong cylinder in transfer, want: %d got %d\n", + fs->req_cyl, fs->cur_cyl); + swim3_end_request(fs, -EIO, 0); fs->state = idle; return; } @@ -542,7 +562,7 @@ static void act(struct floppy_state *fs) return; default: - printk(KERN_ERR"swim3: unknown state %d\n", fs->state); + swim3_err("Unknown state %d\n", fs->state); return; } } @@ -552,59 +572,75 @@ static void scan_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* scan timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); fs->cur_cyl = -1; if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); } else { fs->state = jogging; act(fs); } + spin_unlock_irqrestore(&swim3_lock, flags); } static void seek_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* seek timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_8(&sw->control_bic, DO_SEEK); out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); - printk(KERN_ERR "swim3: seek timeout\n"); - swim3_end_request_cur(-EIO); + swim3_err("%s", "Seek timeout\n"); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + spin_unlock_irqrestore(&swim3_lock, flags); } static void settle_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* settle timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; if (swim3_readbit(fs, SEEK_COMPLETE)) { out_8(&sw->select, RELAX); fs->state = locating; act(fs); - return; + goto unlock; } out_8(&sw->select, RELAX); if (fs->settle_time < 2*HZ) { ++fs->settle_time; set_timeout(fs, 1, settle_timeout); - return; + goto unlock; } - printk(KERN_ERR "swim3: seek settle timeout\n"); - swim3_end_request_cur(-EIO); + swim3_err("%s", "Seek settle timeout\n"); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + unlock: + spin_unlock_irqrestore(&swim3_lock, flags); } static void xfer_timeout(unsigned long data) @@ -612,8 +648,12 @@ static void xfer_timeout(unsigned long data) struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; struct dbdma_regs __iomem *dr = fs->dma; + unsigned long flags; int n; + swim3_dbg("* xfer timeout, state=%d\n", fs->state); + + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_le32(&dr->control, RUN << 16); /* We must wait a bit for dbdma to stop */ @@ -622,12 +662,13 @@ static void xfer_timeout(unsigned long data) out_8(&sw->intr_enable, 0); out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION); out_8(&sw->select, RELAX); - printk(KERN_ERR "swim3: timeout %sing sector %ld\n", - (rq_data_dir(fd_req)==WRITE? "writ": "read"), - (long)blk_rq_pos(fd_req)); - swim3_end_request_cur(-EIO); + swim3_err("Timeout %sing sector %ld\n", + (rq_data_dir(fs->cur_req)==WRITE? "writ": "read"), + (long)blk_rq_pos(fs->cur_req)); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + spin_unlock_irqrestore(&swim3_lock, flags); } static irqreturn_t swim3_interrupt(int irq, void *dev_id) @@ -638,12 +679,17 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) int stat, resid; struct dbdma_regs __iomem *dr; struct dbdma_cmd *cp; + unsigned long flags; + struct request *req = fs->cur_req; + + swim3_dbg("* interrupt, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); intr = in_8(&sw->intr); err = (intr & ERROR_INTR)? in_8(&sw->error): 0; if ((intr & ERROR_INTR) && fs->state != do_transfer) - printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n", - fs->state, rq_data_dir(fd_req), intr, err); + swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n", + fs->state, rq_data_dir(req), intr, err); switch (fs->state) { case locating: if (intr & SEEN_SECTOR) { @@ -653,10 +699,10 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) del_timer(&fs->timeout); fs->timeout_pending = 0; if (sw->ctrack == 0xff) { - printk(KERN_ERR "swim3: seen sector but cyl=ff?\n"); + swim3_err("%s", "Seen sector but cyl=ff?\n"); fs->cur_cyl = -1; if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); } else { @@ -668,8 +714,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) fs->cur_cyl = sw->ctrack; fs->cur_sector = sw->csect; if (fs->expect_cyl != -1 && fs->expect_cyl != fs->cur_cyl) - printk(KERN_ERR "swim3: expected cyl %d, got %d\n", - fs->expect_cyl, fs->cur_cyl); + swim3_err("Expected cyl %d, got %d\n", + fs->expect_cyl, fs->cur_cyl); fs->state = do_transfer; act(fs); } @@ -704,7 +750,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) fs->timeout_pending = 0; dr = fs->dma; cp = fs->dma_cmd; - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) ++cp; /* * Check that the main data transfer has finished. @@ -729,31 +775,32 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) if (intr & ERROR_INTR) { n = fs->scount - 1 - resid / 512; if (n > 0) { - blk_update_request(fd_req, 0, n << 9); + blk_update_request(req, 0, n << 9); fs->req_sector += n; } if (fs->retries < 5) { ++fs->retries; act(fs); } else { - printk("swim3: error %sing block %ld (err=%x)\n", - rq_data_dir(fd_req) == WRITE? "writ": "read", - (long)blk_rq_pos(fd_req), err); - swim3_end_request_cur(-EIO); + swim3_err("Error %sing block %ld (err=%x)\n", + rq_data_dir(req) == WRITE? "writ": "read", + (long)blk_rq_pos(req), err); + swim3_end_request(fs, -EIO, 0); fs->state = idle; } } else { if ((stat & ACTIVE) == 0 || resid != 0) { /* musta been an error */ - printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid); - printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n", - fs->state, rq_data_dir(fd_req), intr, err); - swim3_end_request_cur(-EIO); + swim3_err("fd dma error: stat=%x resid=%d\n", stat, resid); + swim3_err(" state=%d, dir=%x, intr=%x, err=%x\n", + fs->state, rq_data_dir(req), intr, err); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); break; } - if (swim3_end_request(0, fs->scount << 9)) { + fs->retries = 0; + if (swim3_end_request(fs, 0, fs->scount << 9)) { fs->req_sector += fs->scount; if (fs->req_sector > fs->secpertrack) { fs->req_sector -= fs->secpertrack; @@ -770,8 +817,9 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) start_request(fs); break; default: - printk(KERN_ERR "swim3: don't know what to do in state %d\n", fs->state); + swim3_err("Don't know what to do in state %d\n", fs->state); } + spin_unlock_irqrestore(&swim3_lock, flags); return IRQ_HANDLED; } @@ -781,26 +829,31 @@ static void fd_dma_interrupt(int irq, void *dev_id) } */ +/* Called under the mutex to grab exclusive access to a drive */ static int grab_drive(struct floppy_state *fs, enum swim_state state, int interruptible) { unsigned long flags; - spin_lock_irqsave(&fs->lock, flags); - if (fs->state != idle) { + swim3_dbg("%s", "-> grab drive\n"); + + spin_lock_irqsave(&swim3_lock, flags); + if (fs->state != idle && fs->state != available) { ++fs->wanted; while (fs->state != available) { + spin_unlock_irqrestore(&swim3_lock, flags); if (interruptible && signal_pending(current)) { --fs->wanted; - spin_unlock_irqrestore(&fs->lock, flags); return -EINTR; } interruptible_sleep_on(&fs->wait); + spin_lock_irqsave(&swim3_lock, flags); } --fs->wanted; } fs->state = state; - spin_unlock_irqrestore(&fs->lock, flags); + spin_unlock_irqrestore(&swim3_lock, flags); + return 0; } @@ -808,10 +861,12 @@ static void release_drive(struct floppy_state *fs) { unsigned long flags; - spin_lock_irqsave(&fs->lock, flags); + swim3_dbg("%s", "-> release drive\n"); + + spin_lock_irqsave(&swim3_lock, flags); fs->state = idle; start_request(fs); - spin_unlock_irqrestore(&fs->lock, flags); + spin_unlock_irqrestore(&swim3_lock, flags); } static int fd_eject(struct floppy_state *fs) @@ -966,6 +1021,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode) { struct floppy_state *fs = disk->private_data; struct swim3 __iomem *sw = fs->swim3; + mutex_lock(&swim3_mutex); if (fs->ref_count > 0 && --fs->ref_count == 0) { swim3_action(fs, MOTOR_OFF); @@ -1031,30 +1087,48 @@ static const struct block_device_operations floppy_fops = { .revalidate_disk= floppy_revalidate, }; +static void swim3_mb_event(struct macio_dev* mdev, int mb_state) +{ + struct floppy_state *fs = macio_get_drvdata(mdev); + struct swim3 __iomem *sw = fs->swim3; + + if (!fs) + return; + if (mb_state != MB_FD) + return; + + /* Clear state */ + out_8(&sw->intr_enable, 0); + in_8(&sw->intr); + in_8(&sw->error); +} + static int swim3_add_device(struct macio_dev *mdev, int index) { struct device_node *swim = mdev->ofdev.dev.of_node; struct floppy_state *fs = &floppy_states[index]; int rc = -EBUSY; + /* Do this first for message macros */ + memset(fs, 0, sizeof(*fs)); + fs->mdev = mdev; + fs->index = index; + /* Check & Request resources */ if (macio_resource_count(mdev) < 2) { - printk(KERN_WARNING "ifd%d: no address for %s\n", - index, swim->full_name); + swim3_err("%s", "No address in device-tree\n"); return -ENXIO; } - if (macio_irq_count(mdev) < 2) { - printk(KERN_WARNING "fd%d: no intrs for device %s\n", - index, swim->full_name); + if (macio_irq_count(mdev) < 1) { + swim3_err("%s", "No interrupt in device-tree\n"); + return -ENXIO; } if (macio_request_resource(mdev, 0, "swim3 (mmio)")) { - printk(KERN_ERR "fd%d: can't request mmio resource for %s\n", - index, swim->full_name); + swim3_err("%s", "Can't request mmio resource\n"); return -EBUSY; } if (macio_request_resource(mdev, 1, "swim3 (dma)")) { - printk(KERN_ERR "fd%d: can't request dma resource for %s\n", - index, swim->full_name); + swim3_err("%s", "Can't request dma resource\n"); macio_release_resource(mdev, 0); return -EBUSY; } @@ -1063,22 +1137,18 @@ static int swim3_add_device(struct macio_dev *mdev, int index) if (mdev->media_bay == NULL) pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1); - memset(fs, 0, sizeof(*fs)); - spin_lock_init(&fs->lock); fs->state = idle; fs->swim3 = (struct swim3 __iomem *) ioremap(macio_resource_start(mdev, 0), 0x200); if (fs->swim3 == NULL) { - printk("fd%d: couldn't map registers for %s\n", - index, swim->full_name); + swim3_err("%s", "Couldn't map mmio registers\n"); rc = -ENOMEM; goto out_release; } fs->dma = (struct dbdma_regs __iomem *) ioremap(macio_resource_start(mdev, 1), 0x200); if (fs->dma == NULL) { - printk("fd%d: couldn't map DMA for %s\n", - index, swim->full_name); + swim3_err("%s", "Couldn't map dma registers\n"); iounmap(fs->swim3); rc = -ENOMEM; goto out_release; @@ -1090,31 +1160,25 @@ static int swim3_add_device(struct macio_dev *mdev, int index) fs->secpercyl = 36; fs->secpertrack = 18; fs->total_secs = 2880; - fs->mdev = mdev; init_waitqueue_head(&fs->wait); fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space); memset(fs->dma_cmd, 0, 2 * sizeof(struct dbdma_cmd)); st_le16(&fs->dma_cmd[1].command, DBDMA_STOP); + if (mdev->media_bay == NULL || check_media_bay(mdev->media_bay) == MB_FD) + swim3_mb_event(mdev, MB_FD); + if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) { - printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n", - index, fs->swim3_intr, swim->full_name); + swim3_err("%s", "Couldn't request interrupt\n"); pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0); goto out_unmap; return -EBUSY; } -/* - if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) { - printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA", - fs->dma_intr); - return -EBUSY; - } -*/ init_timer(&fs->timeout); - printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count, + swim3_info("SWIM3 floppy controller %s\n", mdev->media_bay ? "in media bay" : ""); return 0; @@ -1132,41 +1196,42 @@ static int swim3_add_device(struct macio_dev *mdev, int index) static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match) { - int i, rc; struct gendisk *disk; + int index, rc; + + index = floppy_count++; + if (index >= MAX_FLOPPIES) + return -ENXIO; /* Add the drive */ - rc = swim3_add_device(mdev, floppy_count); + rc = swim3_add_device(mdev, index); if (rc) return rc; + /* Now register that disk. Same comment about failure handling */ + disk = disks[index] = alloc_disk(1); + if (disk == NULL) + return -ENOMEM; + disk->queue = blk_init_queue(do_fd_request, &swim3_lock); + if (disk->queue == NULL) { + put_disk(disk); + return -ENOMEM; + } + disk->queue->queuedata = &floppy_states[index]; - /* Now create the queue if not there yet */ - if (swim3_queue == NULL) { + if (index == 0) { /* If we failed, there isn't much we can do as the driver is still * too dumb to remove the device, just bail out */ if (register_blkdev(FLOPPY_MAJOR, "fd")) return 0; - swim3_queue = blk_init_queue(do_fd_request, &swim3_lock); - if (swim3_queue == NULL) { - unregister_blkdev(FLOPPY_MAJOR, "fd"); - return 0; - } } - /* Now register that disk. Same comment about failure handling */ - i = floppy_count++; - disk = disks[i] = alloc_disk(1); - if (disk == NULL) - return 0; - disk->major = FLOPPY_MAJOR; - disk->first_minor = i; + disk->first_minor = index; disk->fops = &floppy_fops; - disk->private_data = &floppy_states[i]; - disk->queue = swim3_queue; + disk->private_data = &floppy_states[index]; disk->flags |= GENHD_FL_REMOVABLE; - sprintf(disk->disk_name, "fd%d", i); + sprintf(disk->disk_name, "fd%d", index); set_capacity(disk, 2880); add_disk(disk); @@ -1194,6 +1259,9 @@ static struct macio_driver swim3_driver = .of_match_table = swim3_match, }, .probe = swim3_attach, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = swim3_mb_event, +#endif #if 0 .suspend = swim3_suspend, .resume = swim3_resume, -- cgit v0.10.2 From b5a7e97039a80fae673ccc115ce595d5b88fb4ee Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 12 Dec 2011 10:53:02 -0500 Subject: ext4: fix ext4_end_io_dio() racing against fsync() We need to make sure iocb->private is cleared *before* we put the io_end structure on i_completed_io_list. Otherwise fsync() could potentially run on another CPU and free the iocb structure out from under us. Reported-by: Kent Overstreet Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 848f436..d2c8663 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2781,10 +2781,11 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, iocb->private, io_end->inode->i_ino, iocb, offset, size); + iocb->private = NULL; + /* if not aio dio with unwritten extents, just free io and return */ if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { ext4_free_io_end(io_end); - iocb->private = NULL; out: if (is_async) aio_complete(iocb, ret, 0); @@ -2807,7 +2808,6 @@ out: spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); /* queue the work to convert unwritten extents to written */ - iocb->private = NULL; queue_work(wq, &io_end->work); /* XXX: probably should move into the real I/O completion handler */ -- cgit v0.10.2 From b4611abfa98af8351bf32e8b9ecc9d3384931c37 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 12 Dec 2011 11:00:56 -0500 Subject: ext4: Fix crash due to getting bogus eh_depth value on big-endian systems Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a reference to ext4_extent_header.eh_depth, but forget to pass the value read through le16_to_cpu. The result is a crash on big-endian machines, such as this crash on a POWER7 server: attempt to access beyond end of device sda8: rw=0, want=776392648163376, limit=168558560 Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb Faulting instruction address: 0xc0000000001f5f38 cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0] pc: c0000000001f5f38: .__brelse+0x18/0x60 lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80 sp: c000001bd1aaef70 msr: 9000000000009032 dar: 6b6b6b6b6b6b6bcb dsisr: 40000000 current = 0xc000001bd15b8010 paca = 0xc00000000ffe4600 pid = 19911, comm = flush-8:0 enter ? for help [c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80 [c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0 [c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0 [c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710 [c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310 [c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490 [c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430 [c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670 [c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90 [c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530 [c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300 [c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140 [c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0 [c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300 [c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340 [c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0 [c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70 This is due to getting ext_depth(inode) == 0x101 and therefore running off the end of the path array in ext4_ext_drop_refs into following unallocated structures. This fixes it by adding the necessary le16_to_cpu. Signed-off-by: Paul Mackerras Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 61fa9e1..61cdb97 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1095,7 +1095,7 @@ static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode, le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block), ext4_idx_pblock(EXT_FIRST_INDEX(neh))); - neh->eh_depth = cpu_to_le16(neh->eh_depth + 1); + neh->eh_depth = cpu_to_le16(le16_to_cpu(neh->eh_depth) + 1); ext4_mark_inode_dirty(handle, inode); out: brelse(bh); -- cgit v0.10.2 From 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 8 Dec 2011 08:04:12 -0500 Subject: hwmon: (jz4740) fix signedness bug wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index 7a48b1e..3d7e590 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -59,7 +59,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev, { struct jz4740_hwmon *hwmon = dev_get_drvdata(dev); struct completion *completion = &hwmon->read_completion; - unsigned long t; + long t; unsigned long val; int ret; -- cgit v0.10.2 From d6c4f2ac1de3c1ee10796740aa5b7a1e98a05f07 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 8 Dec 2011 08:33:37 -0500 Subject: hwmon: (jz4740) Staticise jz4740_hwmon_driver It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index 3d7e590..5253d23 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -203,7 +203,7 @@ static int __devexit jz4740_hwmon_remove(struct platform_device *pdev) return 0; } -struct platform_driver jz4740_hwmon_driver = { +static struct platform_driver jz4740_hwmon_driver = { .probe = jz4740_hwmon_probe, .remove = __devexit_p(jz4740_hwmon_remove), .driver = { -- cgit v0.10.2 From f1932fc1a6d899c754676b1dd8b17de93b052d43 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 7 Dec 2011 09:10:26 -0800 Subject: crush: fix mapping calculation when force argument doesn't exist If the force argument isn't valid, we should continue calculating a mapping as if it weren't specified. Signed-off-by: Sage Weil diff --git a/net/ceph/crush/mapper.c b/net/ceph/crush/mapper.c index 42599e3..3a94eae 100644 --- a/net/ceph/crush/mapper.c +++ b/net/ceph/crush/mapper.c @@ -477,7 +477,6 @@ int crush_do_rule(struct crush_map *map, int i, j; int numrep; int firstn; - int rc = -1; BUG_ON(ruleno >= map->max_rules); @@ -491,23 +490,18 @@ int crush_do_rule(struct crush_map *map, * that this may or may not correspond to the specific types * referenced by the crush rule. */ - if (force >= 0) { - if (force >= map->max_devices || - map->device_parents[force] == 0) { - /*dprintk("CRUSH: forcefed device dne\n");*/ - rc = -1; /* force fed device dne */ - goto out; - } - if (!is_out(map, weight, force, x)) { - while (1) { - force_context[++force_pos] = force; - if (force >= 0) - force = map->device_parents[force]; - else - force = map->bucket_parents[-1-force]; - if (force == 0) - break; - } + if (force >= 0 && + force < map->max_devices && + map->device_parents[force] != 0 && + !is_out(map, weight, force, x)) { + while (1) { + force_context[++force_pos] = force; + if (force >= 0) + force = map->device_parents[force]; + else + force = map->bucket_parents[-1-force]; + if (force == 0) + break; } } @@ -600,10 +594,7 @@ int crush_do_rule(struct crush_map *map, BUG_ON(1); } } - rc = result_len; - -out: - return rc; + return result_len; } -- cgit v0.10.2 From e1ad783b12ec8b69da83479c5d21a0d8180bc519 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 11 Dec 2011 16:12:42 -0800 Subject: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming Signed-off-by: Keith Packard Acked-by: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index c954703..908b969 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,13 +53,6 @@ */ #define E820_RESERVED_KERN 128 -/* - * Address ranges that need to be mapped by the kernel direct - * mapping. This is used to make sure regions such as - * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). - */ -#define E820_RESERVED_EFI 129 - #ifndef __ASSEMBLY__ #include struct e820entry { @@ -122,7 +115,6 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif -extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index b8d8bfc..7093e4a 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,6 +33,8 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) +#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) + #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -82,6 +84,9 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) +extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, + u32 type); + #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 65ffd11..303a0e4 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,7 +135,6 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: - case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -784,7 +783,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9a9e40f..cf0ef98 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - unsigned long end_pfn; - #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -934,24 +932,7 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - end_pfn = max_low_pfn; - -#ifdef CONFIG_X86_64 - /* - * There may be regions after the last E820_RAM region that we - * want to include in the kernel direct mapping, such as - * EFI_RUNTIME_SERVICES_DATA. - */ - if (efi_enabled) { - unsigned long efi_end; - - efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI); - if (efi_end > max_low_pfn) - end_pfn = efi_end; - } -#endif - - max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); + max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn< (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) { + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); - - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = (u64) (unsigned long)va; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - } else { - if (!(md->attribute & EFI_MEMORY_WB)) - va = ioremap_nocache(md->phys_addr, size); - else - va = ioremap_cache(md->phys_addr, size); - } + else + va = efi_ioremap(md->phys_addr, size, md->type); md->virt_addr = (u64) (unsigned long) va; @@ -698,6 +684,13 @@ void __init efi_enter_virtual_mode(void) continue; } + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = md->virt_addr; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 312250c..ac3aa54 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,3 +80,20 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } + +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, + u32 type) +{ + unsigned long last_map_pfn; + + if (type == EFI_MEMORY_MAPPED_IO) + return ioremap(phys_addr, size); + + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { + unsigned long top = last_map_pfn << PAGE_SHIFT; + efi_ioremap(top, size - (top - phys_addr), type); + } + + return (void __iomem *)__va(phys_addr); +} -- cgit v0.10.2 From 0c8551e5fa3833c6080542da662394817fea4616 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 12 Dec 2011 10:38:26 +0200 Subject: ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula Reported-by: NeilBrown Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3..28fcb27 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } -- cgit v0.10.2 From 414b591fd16655871e9f5592a55368b10a3ccc30 Mon Sep 17 00:00:00 2001 From: Alex Hermann Date: Mon, 12 Dec 2011 21:42:23 +0100 Subject: usb: option: Add Huawei E398 controlling interfaces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e342660..2990748 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -664,6 +664,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, -- cgit v0.10.2 From 6abff5dc4d5a2c90e597137ce8987e7fd439259b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Mon, 12 Dec 2011 14:51:00 +0100 Subject: USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e8c564a..a8078d0 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1458,6 +1458,16 @@ static const struct usb_device_id acm_ids[] = { }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, + /* Motorola H24 HSPA module: */ + { USB_DEVICE(0x22b8, 0x2d91) }, /* modem */ + { USB_DEVICE(0x22b8, 0x2d92) }, /* modem + diagnostics */ + { USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port */ + { USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics */ + { USB_DEVICE(0x22b8, 0x2d96) }, /* modem + NMEA */ + { USB_DEVICE(0x22b8, 0x2d97) }, /* modem + diagnostics + NMEA */ + { USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port + NMEA */ + { USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */ + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on data interface instead of -- cgit v0.10.2 From 4af04aba93f47699e7ac33e7cfd4da22550e6114 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Tue, 6 Dec 2011 21:23:45 +0000 Subject: ipv6: Fix for adding multicast route for loopback device automatically. There is no obvious reason to add a default multicast route for loopback devices, otherwise there would be a route entry whose dst.error set to -ENETUNREACH that would blocking all multicast packets. ==================== [ more detailed explanation ] The problem is that the resulting routing table depends on the sequence of interface's initialization and in some situation, that would block all muticast packets. Suppose there are two interfaces on my computer (lo and eth0), if we initailize 'lo' before 'eth0', the resuting routing table(for multicast) would be # ip -6 route show | grep ff00:: unreachable ff00::/8 dev lo metric 256 error -101 ff00::/8 dev eth0 metric 256 When sending multicasting packets, routing subsystem will return the first route entry which with a error set to -101(ENETUNREACH). I know the kernel will set the default ipv6 address for 'lo' when it is up and won't set the default multicast route for it, but there is no reason to stop 'init' program from setting address for 'lo', and that is exactly what systemd did. I am sure there is something wrong with kernel or systemd, currently I preferred kernel caused this problem. ==================== Signed-off-by: Li Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index cf88df8..36806de 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1805,7 +1805,8 @@ static struct inet6_dev *addrconf_add_dev(struct net_device *dev) return ERR_PTR(-EACCES); /* Add default multicast route */ - addrconf_add_mroute(dev); + if (!(dev->flags & IFF_LOOPBACK)) + addrconf_add_mroute(dev); /* Add link local route */ addrconf_add_lroute(dev); -- cgit v0.10.2 From 72b36015ba43a3cca5303f5534d2c3e1899eae29 Mon Sep 17 00:00:00 2001 From: Ted Feng Date: Thu, 8 Dec 2011 00:46:21 +0000 Subject: ipip, sit: copy parms.name after register_netdevice Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng Signed-off-by: David S. Miller diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 065effd..0b2e732 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -285,6 +285,8 @@ static struct ip_tunnel * ipip_tunnel_locate(struct net *net, if (register_netdevice(dev) < 0) goto failed_free; + strcpy(nt->parms.name, dev->name); + dev_hold(dev); ipip_tunnel_link(ipn, nt); return nt; @@ -759,7 +761,6 @@ static int ipip_tunnel_init(struct net_device *dev) struct ip_tunnel *tunnel = netdev_priv(dev); tunnel->dev = dev; - strcpy(tunnel->parms.name, dev->name); memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4); memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4); @@ -825,6 +826,7 @@ static void ipip_destroy_tunnels(struct ipip_net *ipn, struct list_head *head) static int __net_init ipip_init_net(struct net *net) { struct ipip_net *ipn = net_generic(net, ipip_net_id); + struct ip_tunnel *t; int err; ipn->tunnels[0] = ipn->tunnels_wc; @@ -848,6 +850,9 @@ static int __net_init ipip_init_net(struct net *net) if ((err = register_netdev(ipn->fb_tunnel_dev))) goto err_reg_dev; + t = netdev_priv(ipn->fb_tunnel_dev); + + strcpy(t->parms.name, ipn->fb_tunnel_dev->name); return 0; err_reg_dev: diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index a7a1860..96f3623 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -263,6 +263,8 @@ static struct ip_tunnel *ipip6_tunnel_locate(struct net *net, if (register_netdevice(dev) < 0) goto failed_free; + strcpy(nt->parms.name, dev->name); + dev_hold(dev); ipip6_tunnel_link(sitn, nt); @@ -1144,7 +1146,6 @@ static int ipip6_tunnel_init(struct net_device *dev) struct ip_tunnel *tunnel = netdev_priv(dev); tunnel->dev = dev; - strcpy(tunnel->parms.name, dev->name); memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4); memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4); @@ -1207,6 +1208,7 @@ static void __net_exit sit_destroy_tunnels(struct sit_net *sitn, struct list_hea static int __net_init sit_init_net(struct net *net) { struct sit_net *sitn = net_generic(net, sit_net_id); + struct ip_tunnel *t; int err; sitn->tunnels[0] = sitn->tunnels_wc; @@ -1231,6 +1233,9 @@ static int __net_init sit_init_net(struct net *net) if ((err = register_netdev(sitn->fb_tunnel_dev))) goto err_reg_dev; + t = netdev_priv(sitn->fb_tunnel_dev); + + strcpy(t->parms.name, sitn->fb_tunnel_dev->name); return 0; err_reg_dev: -- cgit v0.10.2 From 3f1e6d3fd37bd4f25e5b19f1c7ca21850426c33f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 11 Dec 2011 23:42:53 +0000 Subject: sch_gred: should not use GFP_KERNEL while holding a spinlock gred_change_vq() is called under sch_tree_lock(sch). This means a spinlock is held, and we are not allowed to sleep in this context. We might pre-allocate memory using GFP_KERNEL before taking spinlock, but this is not suitable for stable material. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index b9493a0..6cd8ddf 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -385,7 +385,7 @@ static inline int gred_change_vq(struct Qdisc *sch, int dp, struct gred_sched_data *q; if (table->tab[dp] == NULL) { - table->tab[dp] = kzalloc(sizeof(*q), GFP_KERNEL); + table->tab[dp] = kzalloc(sizeof(*q), GFP_ATOMIC); if (table->tab[dp] == NULL) return -ENOMEM; } -- cgit v0.10.2 From fc6cb1cda5db7b2d24bf32890826214b857c728e Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 12 Dec 2011 22:06:18 -0500 Subject: ext4: display the correct mount option in /proc/mounts for [no]init_itable /proc/mounts was showing the mount option [no]init_inode_table when the correct mount option that will be accepted by parse_options() is [no]init_itable. Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 3858767..3e1329e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1155,9 +1155,9 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",block_validity"); if (!test_opt(sb, INIT_INODE_TABLE)) - seq_puts(seq, ",noinit_inode_table"); + seq_puts(seq, ",noinit_itable"); else if (sbi->s_li_wait_mult != EXT4_DEF_LI_WAIT_MULT) - seq_printf(seq, ",init_inode_table=%u", + seq_printf(seq, ",init_itable=%u", (unsigned) sbi->s_li_wait_mult); ext4_show_quota_options(seq, sb); @@ -1333,8 +1333,7 @@ enum { Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity, Opt_inode_readahead_blks, Opt_journal_ioprio, Opt_dioread_nolock, Opt_dioread_lock, - Opt_discard, Opt_nodiscard, - Opt_init_inode_table, Opt_noinit_inode_table, + Opt_discard, Opt_nodiscard, Opt_init_itable, Opt_noinit_itable, }; static const match_table_t tokens = { @@ -1407,9 +1406,9 @@ static const match_table_t tokens = { {Opt_dioread_lock, "dioread_lock"}, {Opt_discard, "discard"}, {Opt_nodiscard, "nodiscard"}, - {Opt_init_inode_table, "init_itable=%u"}, - {Opt_init_inode_table, "init_itable"}, - {Opt_noinit_inode_table, "noinit_itable"}, + {Opt_init_itable, "init_itable=%u"}, + {Opt_init_itable, "init_itable"}, + {Opt_noinit_itable, "noinit_itable"}, {Opt_err, NULL}, }; @@ -1892,7 +1891,7 @@ set_qf_format: case Opt_dioread_lock: clear_opt(sb, DIOREAD_NOLOCK); break; - case Opt_init_inode_table: + case Opt_init_itable: set_opt(sb, INIT_INODE_TABLE); if (args[0].from) { if (match_int(&args[0], &option)) @@ -1903,7 +1902,7 @@ set_qf_format: return 0; sbi->s_li_wait_mult = option; break; - case Opt_noinit_inode_table: + case Opt_noinit_itable: clear_opt(sb, INIT_INODE_TABLE); break; default: -- cgit v0.10.2 From 13c07b0286d340275f2d97adf085cecda37ede37 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 12 Dec 2011 22:06:55 -0800 Subject: linux/log2.h: Fix rounddown_pow_of_two(1) Exactly like roundup_pow_of_two(1), the rounddown version was buggy for the case of a compile-time constant '1' argument. Probably because it originated from the same code, sharing history with the roundup version from before the bugfix (for that one, see commit 1a06a52ee1b0: "Fix roundup_pow_of_two(1)"). However, unlike the roundup version, the fix for rounddown is to just remove the broken special case entirely. It's simply not needed - the generic code 1UL << ilog2(n) does the right thing for the constant '1' argment too. The only reason roundup needed that special case was because rounding up does so by subtracting one from the argument (and then adding one to the result) causing the obvious problems with "ilog2(0)". But rounddown doesn't do any of that, since ilog2() naturally truncates (ie "rounds down") to the right rounded down value. And without the ilog2(0) case, there's no reason for the special case that had the wrong value. tl;dr: rounddown_pow_of_two(1) should be 1, not 0. Acked-by: Dmitry Torokhov Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/include/linux/log2.h b/include/linux/log2.h index 25b8086..fd7ff3d 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -185,7 +185,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n) #define rounddown_pow_of_two(n) \ ( \ __builtin_constant_p(n) ? ( \ - (n == 1) ? 0 : \ (1UL << ilog2(n))) : \ __rounddown_pow_of_two(n) \ ) -- cgit v0.10.2 From 48706d0a91583d08c56e7ef2a7602d99c8d4133f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 13 Dec 2011 10:36:59 +0100 Subject: fuse: fix fuse_retrieve Fix two bugs in fuse_retrieve(): - retrieving more than one page would yield repeated instances of the first page - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the request page array would overflow fuse_retrieve() was added in 2.6.36 and these bugs had been there since the beginning. Signed-off-by: Miklos Szeredi CC: stable@vger.kernel.org diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 5cb8614..2aaf3ea 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1512,7 +1512,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, else if (outarg->offset + num > file_size) num = file_size - outarg->offset; - while (num) { + while (num && req->num_pages < FUSE_MAX_PAGES_PER_REQ) { struct page *page; unsigned int this_num; @@ -1526,6 +1526,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, num -= this_num; total_len += this_num; + index++; } req->misc.retrieve_in.offset = outarg->offset; req->misc.retrieve_in.size = total_len; -- cgit v0.10.2 From b48c6af2086ab2ba8a9c9b6ce9ecb34592ce500c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 13 Dec 2011 10:37:00 +0100 Subject: fuse: fix llseek bug The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates to true. This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) and changed the behavior of SEEK_CUR and SEEK_SET to always retrieve the file attributes. This is a performance regression. Fix the test so that it makes sense. Signed-off-by: Miklos Szeredi CC: stable@vger.kernel.org CC: Josef Bacik CC: Al Viro diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 594f07a..19029e9 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1556,7 +1556,7 @@ static loff_t fuse_file_llseek(struct file *file, loff_t offset, int origin) struct inode *inode = file->f_path.dentry->d_inode; mutex_lock(&inode->i_mutex); - if (origin != SEEK_CUR || origin != SEEK_SET) { + if (origin != SEEK_CUR && origin != SEEK_SET) { retval = fuse_update_attributes(inode, NULL, file, NULL); if (retval) goto exit; -- cgit v0.10.2 From 73104b6e37f75f822e3dcf016147c322d1f6dad9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 13 Dec 2011 11:40:59 +0100 Subject: fuse: llseek fix race Fix race between lseek(fd, 0, SEEK_CUR) and read/write. This was fixed in generic code by commit 5b6f1eb97d (vfs: lseek(fd, 0, SEEK_CUR) race condition). Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 19029e9..0c84100 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1567,6 +1567,10 @@ static loff_t fuse_file_llseek(struct file *file, loff_t offset, int origin) offset += i_size_read(inode); break; case SEEK_CUR: + if (offset == 0) { + retval = file->f_pos; + goto exit; + } offset += file->f_pos; break; case SEEK_DATA: -- cgit v0.10.2 From e2ef36c688d5844a986424c3194bd33212c968ce Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Tue, 13 Dec 2011 11:47:22 -0200 Subject: ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS Some HP laptop models do not have a properly filled OEM string used to set the gpio and polarity of the mute led. Make the mute led configuration work for this case. Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index eeb25d52..616678f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4929,6 +4929,12 @@ static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity) set_hp_led_gpio(codec); return 1; } + /* BIOS bug: unfilled OEM string */ + if (strstr(dev->name, "HP_Mute_LED_P_G")) { + set_hp_led_gpio(codec); + spec->gpio_led_polarity = 1; + return 1; + } } /* -- cgit v0.10.2 From 935a9fee51c945b8942be2d7b4bae069167b4886 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 Dec 2011 12:39:14 -0800 Subject: ibft: Fix finding IBFT ACPI table on UEFI Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index c811cb1..2cce44a 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -746,6 +746,37 @@ static void __exit ibft_exit(void) ibft_cleanup(); } +#ifdef CONFIG_ACPI +static const struct { + char *sign; +} ibft_signs[] = { + /* + * One spec says "IBFT", the other says "iBFT". We have to check + * for both. + */ + { ACPI_SIG_IBFT }, + { "iBFT" }, +}; + +static void __init acpi_find_ibft_region(void) +{ + int i; + struct acpi_table_header *table = NULL; + + if (acpi_disabled) + return; + + for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) { + acpi_get_table(ibft_signs[i].sign, 0, &table); + ibft_addr = (struct acpi_table_ibft *)table; + } +} +#else +static void __init acpi_find_ibft_region(void) +{ +} +#endif + /* * ibft_init() - creates sysfs tree entries for the iBFT data. */ @@ -753,9 +784,16 @@ static int __init ibft_init(void) { int rc = 0; + /* + As on UEFI systems the setup_arch()/find_ibft_region() + is called before ACPI tables are parsed and it only does + legacy finding. + */ + if (!ibft_addr) + acpi_find_ibft_region(); + if (ibft_addr) { - printk(KERN_INFO "iBFT detected at 0x%llx.\n", - (u64)isa_virt_to_bus(ibft_addr)); + pr_info("iBFT detected.\n"); rc = ibft_check_device(); if (rc) diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index bfe7232..4da4eb9 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -45,13 +45,6 @@ EXPORT_SYMBOL_GPL(ibft_addr); static const struct { char *sign; } ibft_signs[] = { -#ifdef CONFIG_ACPI - /* - * One spec says "IBFT", the other says "iBFT". We have to check - * for both. - */ - { ACPI_SIG_IBFT }, -#endif { "iBFT" }, { "BIFT" }, /* Broadcom iSCSI Offload */ }; @@ -62,14 +55,6 @@ static const struct { #define VGA_MEM 0xA0000 /* VGA buffer */ #define VGA_SIZE 0x20000 /* 128kB */ -#ifdef CONFIG_ACPI -static int __init acpi_find_ibft(struct acpi_table_header *header) -{ - ibft_addr = (struct acpi_table_ibft *)header; - return 0; -} -#endif /* CONFIG_ACPI */ - static int __init find_ibft_in_mem(void) { unsigned long pos; @@ -94,6 +79,7 @@ static int __init find_ibft_in_mem(void) * the table cannot be valid. */ if (pos + len <= (IBFT_END-1)) { ibft_addr = (struct acpi_table_ibft *)virt; + pr_info("iBFT found at 0x%lx.\n", pos); goto done; } } @@ -108,20 +94,12 @@ done: */ unsigned long __init find_ibft_region(unsigned long *sizep) { -#ifdef CONFIG_ACPI - int i; -#endif ibft_addr = NULL; -#ifdef CONFIG_ACPI - for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) - acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft); -#endif /* CONFIG_ACPI */ - /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will * only use ACPI for this */ - if (!ibft_addr && !efi_enabled) + if (!efi_enabled) find_ibft_in_mem(); if (ibft_addr) { -- cgit v0.10.2 From 6a82c47aa84ab22cb5969a44105cca5358879d21 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 13 Dec 2011 09:19:26 -0800 Subject: ceph: fix SEEK_CUR, SEEK_SET regression Commit 06222e491e663dac939f04b125c9dc52126a75c4 got the if wrong so that it always evaluates as true. This is semantically harmless, but makes SEEK_CUR and SEEK_SET needlessly query the server. Rewrite the if to explicitly enumerate the cases we DO need a valid i_size to make this code less fragile. Reported-by: Roel Kluin Signed-off-by: Sage Weil diff --git a/fs/ceph/file.c b/fs/ceph/file.c index af18733..ed72428 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -797,7 +797,8 @@ static loff_t ceph_llseek(struct file *file, loff_t offset, int origin) mutex_lock(&inode->i_mutex); __ceph_do_pending_vmtruncate(inode); - if (origin != SEEK_CUR || origin != SEEK_SET) { + + if (origin == SEEK_END || origin == SEEK_DATA || origin == SEEK_HOLE) { ret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE); if (ret < 0) { offset = ret; -- cgit v0.10.2 From 5cc361e3b8241989d8240014dbbe6214c9292541 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 12 Dec 2011 23:58:21 -0500 Subject: ubifs: too early register_filesystem() doing that before you are ready to handle mount() is a Bad Idea(tm)... Signed-off-by: Al Viro diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 20403dc..ae0e76b 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -2264,19 +2264,12 @@ static int __init ubifs_init(void) return -EINVAL; } - err = register_filesystem(&ubifs_fs_type); - if (err) { - ubifs_err("cannot register file system, error %d", err); - return err; - } - - err = -ENOMEM; ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab", sizeof(struct ubifs_inode), 0, SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT, &inode_slab_ctor); if (!ubifs_inode_slab) - goto out_reg; + return -ENOMEM; register_shrinker(&ubifs_shrinker_info); @@ -2288,15 +2281,20 @@ static int __init ubifs_init(void) if (err) goto out_compr; + err = register_filesystem(&ubifs_fs_type); + if (err) { + ubifs_err("cannot register file system, error %d", err); + goto out_dbg; + } return 0; +out_dbg: + dbg_debugfs_exit(); out_compr: ubifs_compressors_exit(); out_shrinker: unregister_shrinker(&ubifs_shrinker_info); kmem_cache_destroy(ubifs_inode_slab); -out_reg: - unregister_filesystem(&ubifs_fs_type); return err; } /* late_initcall to let compressors initialize first */ -- cgit v0.10.2 From 988f032567eaba3c5896c5de05270b9ff71b2a9d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 13 Dec 2011 12:25:27 -0500 Subject: fuse: register_filesystem() called too early same story as with ubifs Signed-off-by: Al Viro diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 3e6d727..aa83109 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1138,28 +1138,28 @@ static int __init fuse_fs_init(void) { int err; - err = register_filesystem(&fuse_fs_type); - if (err) - goto out; - - err = register_fuseblk(); - if (err) - goto out_unreg; - fuse_inode_cachep = kmem_cache_create("fuse_inode", sizeof(struct fuse_inode), 0, SLAB_HWCACHE_ALIGN, fuse_inode_init_once); err = -ENOMEM; if (!fuse_inode_cachep) - goto out_unreg2; + goto out; + + err = register_fuseblk(); + if (err) + goto out2; + + err = register_filesystem(&fuse_fs_type); + if (err) + goto out3; return 0; - out_unreg2: + out3: unregister_fuseblk(); - out_unreg: - unregister_filesystem(&fuse_fs_type); + out2: + kmem_cache_destroy(fuse_inode_cachep); out: return err; } -- cgit v0.10.2 From 7c6455e368bc87ef38df7b6ddba2339a67107bdf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 13 Dec 2011 12:32:42 -0500 Subject: configfs: register_filesystem() called too early Signed-off-by: Al Viro diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index ca418aa..9d8715c 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -292,7 +292,7 @@ int __init configfs_inode_init(void) return bdi_init(&configfs_backing_dev_info); } -void __exit configfs_inode_exit(void) +void configfs_inode_exit(void) { bdi_destroy(&configfs_backing_dev_info); } diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index ecc6217..276e15c 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -143,28 +143,26 @@ static int __init configfs_init(void) goto out; config_kobj = kobject_create_and_add("config", kernel_kobj); - if (!config_kobj) { - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - goto out; - } + if (!config_kobj) + goto out2; + + err = configfs_inode_init(); + if (err) + goto out3; err = register_filesystem(&configfs_fs_type); - if (err) { - printk(KERN_ERR "configfs: Unable to register filesystem!\n"); - kobject_put(config_kobj); - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - goto out; - } + if (err) + goto out4; - err = configfs_inode_init(); - if (err) { - unregister_filesystem(&configfs_fs_type); - kobject_put(config_kobj); - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - } + return 0; +out4: + printk(KERN_ERR "configfs: Unable to register filesystem!\n"); + configfs_inode_exit(); +out3: + kobject_put(config_kobj); +out2: + kmem_cache_destroy(configfs_dir_cachep); + configfs_dir_cachep = NULL; out: return err; } -- cgit v0.10.2 From 02a551c9755b799579e0a093bcc99b80b4dc1453 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 13 Dec 2011 05:33:02 +0100 Subject: USB: option: Removing one bogus and adding some new Huawei combinations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2990748..6dd6453 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -663,7 +663,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ -- cgit v0.10.2 From b2888095feb3c651cba5904b0227622e82777b34 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 9 Dec 2011 16:56:08 -0600 Subject: gpio: pl061: drop extra check for NULL platform_data In adding DT binding support, the check for NULL platform_data got added back in inadvertently, so remove it. Signed-off-by: Rob Herring Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 093c90b..4102f63 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -238,10 +238,6 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id) int ret, irq, i; static DECLARE_BITMAP(init_irq, NR_IRQS); - pdata = dev->dev.platform_data; - if (pdata == NULL) - return -ENODEV; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) return -ENOMEM; -- cgit v0.10.2 From f9ea14efa5277c47efec341dee2c408b6b80f854 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 13 Dec 2011 23:53:49 +0800 Subject: gpio-ml-ioh: fix a bug in the interrupt handler GPIO's irq action's dev_id is set to the first struct ioh_gpio chip, so when loop checking the 8 chips, the "chip" should be changed according. Signed-off-by: Feng Tang Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index ea8e738..92b6f51a 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -339,7 +339,7 @@ static irqreturn_t ioh_gpio_handler(int irq, void *dev_id) int i, j; int ret = IRQ_NONE; - for (i = 0; i < 8; i++) { + for (i = 0; i < 8; i++, chip++) { reg_val = ioread32(&chip->reg->regs[i].istatus); for (j = 0; j < num_ports[i]; j++) { if (reg_val & BIT(j)) { -- cgit v0.10.2 From 4d052213ff8f71a4a70fc4eed71b773cfde51fcf Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 13 Dec 2011 23:53:50 +0800 Subject: gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip These hooks will be needed by the general disabl/enable_irq(); Signed-off-by: Feng Tang Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index 92b6f51a..461958f 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -332,6 +332,34 @@ static void ioh_irq_mask(struct irq_data *d) &chip->reg->regs[chip->ch].imask); } +static void ioh_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien &= ~(1 << (d->irq - chip->irq_base)); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static void ioh_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien |= 1 << (d->irq - chip->irq_base); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + static irqreturn_t ioh_gpio_handler(int irq, void *dev_id) { struct ioh_gpio *chip = dev_id; @@ -370,6 +398,8 @@ static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip, ct->chip.irq_mask = ioh_irq_mask; ct->chip.irq_unmask = ioh_irq_unmask; ct->chip.irq_set_type = ioh_irq_type; + ct->chip.irq_disable = ioh_irq_disable; + ct->chip.irq_enable = ioh_irq_enable; irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST | IRQ_NOPROBE, 0); -- cgit v0.10.2 From 28538df0389a59ede9ccd6f327d2031f0044db87 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 13 Dec 2011 10:12:48 +0100 Subject: gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121 Add a 5121-custom reject if an input-only pin is requested to be output (see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to consume less lines which scales better. Signed-off-by: Wolfram Sang [grant.likely: Fixed build error] Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index ec3fcf0..5cd04b6 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -132,6 +132,15 @@ static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val return 0; } +static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + /* GPIO 28..31 are input only on MPC5121 */ + if (gpio >= 28) + return -EINVAL; + + return mpc8xxx_gpio_dir_out(gc, gpio, val); +} + static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset) { struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); @@ -340,11 +349,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) mm_gc->save_regs = mpc8xxx_gpio_save_regs; gc->ngpio = MPC8XXX_GPIO_PINS; gc->direction_input = mpc8xxx_gpio_dir_in; - gc->direction_output = mpc8xxx_gpio_dir_out; - if (of_device_is_compatible(np, "fsl,mpc8572-gpio")) - gc->get = mpc8572_gpio_get; - else - gc->get = mpc8xxx_gpio_get; + gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ? + mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out; + gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ? + mpc8572_gpio_get : mpc8xxx_gpio_get; gc->set = mpc8xxx_gpio_set; gc->to_irq = mpc8xxx_gpio_to_irq; -- cgit v0.10.2 From 9d5a09e659f8414dd3713e2acbfaf8a9e9794aa1 Mon Sep 17 00:00:00 2001 From: Yehuda Sadeh Date: Tue, 13 Dec 2011 09:57:44 -0800 Subject: ceph: add missing spin_unlock at ceph_mdsc_build_path() one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 34bc350..6203d80 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1495,6 +1495,7 @@ retry: pos, temp); } else if (stop_on_nosnap && inode && ceph_snap(inode) == CEPH_NOSNAP) { + spin_unlock(&temp->d_lock); break; } else { pos -= temp->d_name.len; -- cgit v0.10.2 From e5fe29c7198a1f6616286dfc8602a69da165cb3f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 8 Dec 2011 22:23:00 +0200 Subject: ARM: OMAP: rx51: fix USB Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras Reviewed-by: Sebastian Reichel [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07..c15c5c9 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } -- cgit v0.10.2 From bb3c36863e8001fc21a88bebfdead4da4c23e848 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 13 Dec 2011 17:35:06 -0500 Subject: ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow(). After commit 8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3399dd3..b582a0a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -728,7 +728,7 @@ static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort, int attempts = !in_softirq(); if (!(rt->rt6i_flags&RTF_GATEWAY)) { - if (rt->rt6i_dst.plen != 128 && + if (ort->rt6i_dst.plen != 128 && ipv6_addr_equal(&ort->rt6i_dst.addr, daddr)) rt->rt6i_flags |= RTF_ANYCAST; ipv6_addr_copy(&rt->rt6i_gateway, daddr); -- cgit v0.10.2 From 0a7e22e61e07a2ea479511f9620858be2f1507e8 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 14 Nov 2011 20:16:57 -0600 Subject: staging: tidspbridge: include module.h by default Fixes compilation break when compiled as part of the kernel: drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe': drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function) drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.) Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index c43c7e3..76cfc6e 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -24,11 +24,7 @@ #include #include #include - -#ifdef MODULE #include -#endif - #include #include #include -- cgit v0.10.2 From ed625b9143ee53fe610320908c89e22635ee6e87 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 18 Nov 2011 16:18:54 -0600 Subject: staging: tidspbridge: request dmtimer clocks on init Given that dm timer framework doesn't support request of clocks by soft | hard irqs because some recent changes, tidspbridge needs to request its clocks on init and enable/disable them on demand. This was first seen on 3.2-rc1. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index 3d1279c..7eb5617 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -54,6 +54,7 @@ /* Bridge GPT id (1 - 4), DM Timer id (5 - 8) */ #define DMT_ID(id) ((id) + 4) +#define DM_TIMER_CLOCKS 4 /* Bridge MCBSP id (6 - 10), OMAP Mcbsp id (0 - 4) */ #define MCBSP_ID(id) ((id) - 6) @@ -114,8 +115,13 @@ static s8 get_clk_type(u8 id) */ void dsp_clk_exit(void) { + int i; + dsp_clock_disable_all(dsp_clocks); + for (i = 0; i < DM_TIMER_CLOCKS; i++) + omap_dm_timer_free(timer[i]); + clk_put(iva2_clk); clk_put(ssi.sst_fck); clk_put(ssi.ssr_fck); @@ -130,9 +136,13 @@ void dsp_clk_exit(void) void dsp_clk_init(void) { static struct platform_device dspbridge_device; + int i, id; dspbridge_device.dev.bus = &platform_bus_type; + for (i = 0, id = 5; i < DM_TIMER_CLOCKS; i++, id++) + timer[i] = omap_dm_timer_request_specific(id); + iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck"); if (IS_ERR(iva2_clk)) dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk); @@ -204,8 +214,7 @@ int dsp_clk_enable(enum dsp_clk_id clk_id) clk_enable(iva2_clk); break; case GPT_CLK: - timer[clk_id - 1] = - omap_dm_timer_request_specific(DMT_ID(clk_id)); + status = omap_dm_timer_start(timer[clk_id - 1]); break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: @@ -281,7 +290,7 @@ int dsp_clk_disable(enum dsp_clk_id clk_id) clk_disable(iva2_clk); break; case GPT_CLK: - omap_dm_timer_free(timer[clk_id - 1]); + status = omap_dm_timer_stop(timer[clk_id - 1]); break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: -- cgit v0.10.2 From c7caf4d4c56aee40b995f5858ccf1c814f3d2da2 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 11 Dec 2011 10:27:54 -0600 Subject: staging: r8712u: Add new USB ID Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index fb2e89c..5385da2 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -89,6 +89,7 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { {USB_DEVICE(0x0DF6, 0x0045)}, {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ {USB_DEVICE(0x0DF6, 0x004B)}, + {USB_DEVICE(0x0DF6, 0x005D)}, {USB_DEVICE(0x0DF6, 0x0063)}, /* Sweex */ {USB_DEVICE(0x177F, 0x0154)}, -- cgit v0.10.2 From ea51d132dbf9b00063169c1159bee253d9649224 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Tue, 13 Dec 2011 21:41:15 -0500 Subject: ext4: avoid hangs in ext4_da_should_update_i_disksize() If the pte mapping in generic_perform_write() is unmapped between iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the "copied" parameter to ->end_write can be zero. ext4 couldn't cope with it with delayed allocations enabled. This skips the i_disksize enlargement logic if copied is zero and no new data was appeneded to the inode. gdb> bt #0 0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\ 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467 #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 #2 0xffffffff810d97f1 in generic_perform_write (iocb=, iov=, nr_segs=, pos=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2440 #3 generic_file_buffered_write (iocb=, iov=, nr_segs=, p\ os=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2482 #4 0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\ xffff88001e26be40) at mm/filemap.c:2600 #5 0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=, pos=) at mm/filemap.c:2632 #6 0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\ t fs/ext4/file.c:136 #7 0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=, len=, \ ppos=0xffff88001e26bf48) at fs/read_write.c:406 #8 0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960
, count=0x4\ 000, pos=0xffff88001e26bf48) at fs/read_write.c:435 #9 0xffffffff8113816c in sys_write (fd=, buf=0x1ec2960
, count=0x\ 4000) at fs/read_write.c:487 #10 #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ () #12 0x0000000000000000 in ?? () gdb> print offset $22 = 0xffffffffffffffff gdb> print idx $23 = 0xffffffff gdb> print inode->i_blkbits $24 = 0xc gdb> up #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 2512 if (ext4_da_should_update_i_disksize(page, end)) { gdb> print start $25 = 0x0 gdb> print end $26 = 0xffffffffffffffff gdb> print pos $27 = 0x108000 gdb> print new_i_size $28 = 0x108000 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize $29 = 0xd9000 gdb> down 2467 for (i = 0; i < idx; i++) gdb> print i $30 = 0xd44acbee This is 100% reproducible with some autonuma development code tuned in a very aggressive manner (not normal way even for knumad) which does "exotic" changes to the ptes. It wouldn't normally trigger but I don't see why it can't happen normally if the page is added to swap cache in between the two faults leading to "copied" being zero (which then hangs in ext4). So it should be fixed. Especially possible with lumpy reclaim (albeit disabled if compaction is enabled) as that would ignore the young bits in the ptes. Signed-off-by: Andrea Arcangeli Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d2c8663..b5edc6e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2508,7 +2508,7 @@ static int ext4_da_write_end(struct file *file, */ new_i_size = pos + copied; - if (new_i_size > EXT4_I(inode)->i_disksize) { + if (copied && new_i_size > EXT4_I(inode)->i_disksize) { if (ext4_da_should_update_i_disksize(page, end)) { down_write(&EXT4_I(inode)->i_data_sem); if (new_i_size > EXT4_I(inode)->i_disksize) { -- cgit v0.10.2 From 13a79a4741d37fda2fbafb953f0f301dc007928f Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 21:51:55 -0500 Subject: ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize If there is an unwritten but clean buffer in a page and there is a dirty buffer after the buffer, then mpage_submit_io does not write the dirty buffer out. As a result, da_writepages loops forever. This patch fixes the problem by checking dirty flag. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b5edc6e..cf20e1f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1339,8 +1339,11 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, clear_buffer_unwritten(bh); } - /* skip page if block allocation undone */ - if (buffer_delay(bh) || buffer_unwritten(bh)) + /* + * skip page if block allocation undone and + * block is dirty + */ + if (ext4_bh_delay_or_unwritten(NULL, bh)) skip_page = 1; bh = bh->b_this_page; block_start += bh->b_size; -- cgit v0.10.2 From 093e6e3666f47d29763a235b404c84ee47ba8bb0 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:05:05 -0500 Subject: ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers() If a page has been read into memory and never been written, it has no buffers, but we should handle the page in truncate or punch hole. VFS code of writing operations has handled holes correctly, so this patch removes the code handling holes in writing operations. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cf20e1f..92655fd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2390,7 +2390,6 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, pgoff_t index; struct inode *inode = mapping->host; handle_t *handle; - loff_t page_len; index = pos >> PAGE_CACHE_SHIFT; @@ -2437,13 +2436,6 @@ retry: */ if (pos + len > inode->i_size) ext4_truncate_failed_write(inode); - } else { - page_len = pos & (PAGE_CACHE_SIZE - 1); - if (page_len > 0) { - ret = ext4_discard_partial_page_buffers_no_lock(handle, - inode, page, pos - page_len, page_len, - EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED); - } } if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) @@ -2486,7 +2478,6 @@ static int ext4_da_write_end(struct file *file, loff_t new_i_size; unsigned long start, end; int write_mode = (int)(unsigned long)fsdata; - loff_t page_len; if (write_mode == FALL_BACK_TO_NONDELALLOC) { if (ext4_should_order_data(inode)) { @@ -2535,16 +2526,6 @@ static int ext4_da_write_end(struct file *file, } ret2 = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - - page_len = PAGE_CACHE_SIZE - - ((pos + copied - 1) & (PAGE_CACHE_SIZE - 1)); - - if (page_len > 0) { - ret = ext4_discard_partial_page_buffers_no_lock(handle, - inode, page, pos + copied - 1, page_len, - EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED); - } - copied = ret2; if (ret2 < 0) ret = ret2; @@ -3206,26 +3187,8 @@ int ext4_discard_partial_page_buffers_no_lock(handle_t *handle, iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); - if (!page_has_buffers(page)) { - /* - * If the range to be discarded covers a partial block - * we need to get the page buffers. This is because - * partial blocks cannot be released and the page needs - * to be updated with the contents of the block before - * we write the zeros on top of it. - */ - if ((from & (blocksize - 1)) || - ((from + length) & (blocksize - 1))) { - create_empty_buffers(page, blocksize, 0); - } else { - /* - * If there are no partial blocks, - * there is nothing to update, - * so we can return now - */ - return 0; - } - } + if (!page_has_buffers(page)) + create_empty_buffers(page, blocksize, 0); /* Find the buffer that contains "offset" */ bh = page_buffers(page); -- cgit v0.10.2 From 5b5ffa49d4bbb8ca4c41c094261660264f16bd20 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:13:42 -0500 Subject: ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater than ee_block + ee_len. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 61cdb97..607b155 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2955,7 +2955,6 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, /* Pre-conditions */ BUG_ON(!ext4_ext_is_uninitialized(ex)); BUG_ON(!in_range(map->m_lblk, ee_block, ee_len)); - BUG_ON(map->m_lblk + map->m_len > ee_block + ee_len); /* * Attempt to transfer newly initialized blocks from the currently -- cgit v0.10.2 From 5a0dc7365c240795bf190766eba7a27600be3b3e Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:29:12 -0500 Subject: ext4: handle EOF correctly in ext4_bio_write_page() We need to zero out part of a page which beyond EOF before setting uptodate, otherwise, mapread or write will see non-zero data beyond EOF. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 7ce1d0b..7e106c8 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -385,6 +385,18 @@ int ext4_bio_write_page(struct ext4_io_submit *io, block_end = block_start + blocksize; if (block_start >= len) { + /* + * Comments copied from block_write_full_page_endio: + * + * The page straddles i_size. It must be zeroed out on + * each and every writepage invocation because it may + * be mmapped. "A file is mapped in multiples of the + * page size. For a file that is not a multiple of + * the page size, the remaining memory is zeroed when + * mapped, and writes to that region are not written + * out to the file." + */ + zero_user_segment(page, block_start, block_end); clear_buffer_dirty(bh); set_buffer_uptodate(bh); continue; -- cgit v0.10.2 From 759c361eb95964d0d786f8962224dd0d9e780e6e Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Tue, 13 Dec 2011 02:47:29 +0100 Subject: fs/ncpfs: fix error paths and goto statements in ncp_fill_super() The label 'out_bdi' should be followed by bdi_destroy() instead of fput() which should be after the 'out_fput' label. If bdi_setup_and_register() fails then jump to the 'out_fput' label instead of the 'out_bdi' one. If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi' label to call bdi_destroy() otherwise the bdi object will not be destroyed. Compile tested only. Signed-off-by: Djalal Harouni Signed-off-by: Al Viro diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c index 5b5fa33..cbd1a61 100644 --- a/fs/ncpfs/inode.c +++ b/fs/ncpfs/inode.c @@ -548,7 +548,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent) error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY); if (error) - goto out_bdi; + goto out_fput; server->ncp_filp = ncp_filp; server->ncp_sock = sock; @@ -559,7 +559,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent) error = -EBADF; server->info_filp = fget(data.info_fd); if (!server->info_filp) - goto out_fput; + goto out_bdi; error = -ENOTSOCK; sock_inode = server->info_filp->f_path.dentry->d_inode; if (!S_ISSOCK(sock_inode->i_mode)) @@ -746,9 +746,9 @@ out_nls: out_fput2: if (server->info_filp) fput(server->info_filp); -out_fput: - bdi_destroy(&server->bdi); out_bdi: + bdi_destroy(&server->bdi); +out_fput: /* 23/12/1998 Marcin Dalecki : * * The previously used put_filp(ncp_filp); was bogus, since -- cgit v0.10.2 From cd5cfce856684e13b9b57d46b78bb827e9c4da3c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Dec 2011 09:23:48 -0500 Subject: drm/radeon/kms: add some new pci ids Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43739 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 4e4fbb8..14b6cd0 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -182,8 +182,11 @@ {0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -195,8 +198,10 @@ {0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -246,6 +251,7 @@ {0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x68fa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -488,6 +494,8 @@ {0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ @@ -502,6 +510,8 @@ {0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ -- cgit v0.10.2 From b1f44e13a525d2ffb7d5afe2273b7169d6f2222e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 14 Dec 2011 10:05:22 -0800 Subject: sparc32: Be less strict in matching %lo part of relocation. The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: David S. Miller Tested-by: Sergei Trofimovich diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c index 5175ac2..8a7f817 100644 --- a/arch/sparc/mm/btfixup.c +++ b/arch/sparc/mm/btfixup.c @@ -302,8 +302,7 @@ void __init btfixup(void) case 'i': /* INT */ if ((insn & 0xc1c00000) == 0x01000000) /* %HI */ set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10)); - else if ((insn & 0x80002000) == 0x80002000 && - (insn & 0x01800000) != 0x01800000) /* %LO */ + else if ((insn & 0x80002000) == 0x80002000) /* %LO */ set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff)); else { prom_printf(insn_i, p, addr, insn); -- cgit v0.10.2 From 645e903528ca6cd510f9ac71a6a23de1a4d931e3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 14 Dec 2011 15:52:30 +0800 Subject: ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo Several people with this chipset have reported inconsistent/sloppy values for position reporting when the DMA position buffer is used, and that setting position_fix=1 have fixed their problems. BugLink: https://bugs.launchpad.net/bugs/825709 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 84d11d7..c2f79e6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2971,7 +2971,8 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { /* SCH */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE}, + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_LPIB }, /* Poulsbo */ + /* ICH */ { PCI_DEVICE(0x8086, 0x2668), .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC | AZX_DCAPS_BUFSIZE }, /* ICH6 */ -- cgit v0.10.2 From f4a2f4c548296168832ad4ab7e7f7b0cd0bf1214 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:01 -0500 Subject: Btrfs: fix wrong i_size when truncating a file to a larger size Btrfsck report error 100 after the 83th case of xfstests was run, it means the i_size of the file is wrong. The reason of this bug is that: Btrfs increased i_size of the file at the beginning, but it failed to expand the file, and failed to update the i_size to the old size because there is no enough space in the file system, so we found a wrong i_size. This patch fixes this bug by updating the i_size just when we pass the file expanding and get enough space to update i-node. Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c5ccec2..4bbceb9 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3370,6 +3370,8 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) static int btrfs_setsize(struct inode *inode, loff_t newsize) { + struct btrfs_root *root = BTRFS_I(inode)->root; + struct btrfs_trans_handle *trans; loff_t oldsize = i_size_read(inode); int ret; @@ -3377,16 +3379,20 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) return 0; if (newsize > oldsize) { - i_size_write(inode, newsize); - btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL); truncate_pagecache(inode, oldsize, newsize); ret = btrfs_cont_expand(inode, oldsize, newsize); - if (ret) { - btrfs_setsize(inode, oldsize); + if (ret) return ret; - } - mark_inode_dirty(inode); + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) + return PTR_ERR(trans); + + i_size_write(inode, newsize); + btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL); + ret = btrfs_update_inode(trans, root, inode); + + btrfs_end_transaction_throttle(trans, root); } else { /* -- cgit v0.10.2 From 3642320e07444cc46327b24977d752f99706dac2 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix wrong disk space information of the files Btrfsck report errors after the 83th case of xfstests was run, The error number is 400, it means the used disk space of the file is wrong. The reason of this bug is that: The file truncation may fail when the space of the file system is not enough, and leave some file extents, whose offset are beyond the end of the files. When we want to expand those files, we will drop those file extents, and put in dummy file extents, and then we should update the i-node. But btrfs forgets to do it. This patch adds the forgotten i-node update. Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4bbceb9..f1c4bce 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3327,7 +3327,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) u64 hint_byte = 0; hole_size = last_byte - cur_offset; - trans = btrfs_start_transaction(root, 2); + trans = btrfs_start_transaction(root, 3); if (IS_ERR(trans)) { err = PTR_ERR(trans); break; @@ -3337,6 +3337,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) cur_offset + hole_size, &hint_byte, 1); if (err) { + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); break; } @@ -3346,6 +3347,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) 0, hole_size, 0, hole_size, 0, 0, 0); if (err) { + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); break; } @@ -3353,6 +3355,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) btrfs_drop_extent_cache(inode, hole_start, last_byte - 1, 0); + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); } free_extent_map(em); -- cgit v0.10.2 From 39fb26c398ddf8d7794a85e896cfe1a42e55524b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix inaccurate available space on raid0 profile When we use raid0 as the data profile, df command may show us a very inaccurate value of the available space, which may be much less than the real one. It may make the users puzzled. Fix it by changing the calculation of the available space, and making it be more similar to a fake chunk allocation. Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 1a3ce9e..41495dce 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1079,7 +1079,7 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) u64 avail_space; u64 used_space; u64 min_stripe_size; - int min_stripes = 1; + int min_stripes = 1, num_stripes = 1; int i = 0, nr_devices; int ret; @@ -1093,12 +1093,16 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) /* calc min stripe number for data space alloction */ type = btrfs_get_alloc_profile(root, 1); - if (type & BTRFS_BLOCK_GROUP_RAID0) + if (type & BTRFS_BLOCK_GROUP_RAID0) { min_stripes = 2; - else if (type & BTRFS_BLOCK_GROUP_RAID1) + num_stripes = nr_devices; + } else if (type & BTRFS_BLOCK_GROUP_RAID1) { min_stripes = 2; - else if (type & BTRFS_BLOCK_GROUP_RAID10) + num_stripes = 2; + } else if (type & BTRFS_BLOCK_GROUP_RAID10) { min_stripes = 4; + num_stripes = 4; + } if (type & BTRFS_BLOCK_GROUP_DUP) min_stripe_size = 2 * BTRFS_STRIPE_LEN; @@ -1167,13 +1171,16 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) i = nr_devices - 1; avail_space = 0; while (nr_devices >= min_stripes) { + if (num_stripes > nr_devices) + num_stripes = nr_devices; + if (devices_info[i].max_avail >= min_stripe_size) { int j; u64 alloc_size; - avail_space += devices_info[i].max_avail * min_stripes; + avail_space += devices_info[i].max_avail * num_stripes; alloc_size = devices_info[i].max_avail; - for (j = i + 1 - min_stripes; j <= i; j++) + for (j = i + 1 - num_stripes; j <= i; j++) devices_info[j].max_avail -= alloc_size; } i--; -- cgit v0.10.2 From f8e9e0b07be0464e12366631da3da73a1a62449c Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: btrfs: keep orphans for subvolume deletion Since we have the free space caches, btrfs_orphan_cleanup also runs for the tree_root. Unfortunately this also cleans up the orphans used to mark subvol deletions in progress. Currently if a subvol deletion gets interrupted twice by umount/mount, the deletion will not be continued and the space permanently lost, though it would be possible to write a tool to recover those lost subvol deletions. This patch checks if the orphan belongs to a subvol (dead root) and skips the deletion. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f1c4bce..4a31493 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2158,6 +2158,38 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) if (ret && ret != -ESTALE) goto out; + if (ret == -ESTALE && root == root->fs_info->tree_root) { + struct btrfs_root *dead_root; + struct btrfs_fs_info *fs_info = root->fs_info; + int is_dead_root = 0; + + /* + * this is an orphan in the tree root. Currently these + * could come from 2 sources: + * a) a snapshot deletion in progress + * b) a free space cache inode + * We need to distinguish those two, as the snapshot + * orphan must not get deleted. + * find_dead_roots already ran before us, so if this + * is a snapshot deletion, we should find the root + * in the dead_roots list + */ + spin_lock(&fs_info->trans_lock); + list_for_each_entry(dead_root, &fs_info->dead_roots, + root_list) { + if (dead_root->root_key.objectid == + found_key.objectid) { + is_dead_root = 1; + break; + } + } + spin_unlock(&fs_info->trans_lock); + if (is_dead_root) { + /* prevent this orphan from being found again */ + key.offset = found_key.objectid - 1; + continue; + } + } /* * Inode is already gone but the orphan item is still there, * kill the orphan item. -- cgit v0.10.2 From 306424cc880a0fbbdc99eee1f43d056a301a180f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix ctime update of on-disk inode To reproduce the bug: # touch /mnt/tmp # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:23.412105981 +0800 # chattr +i /mnt/tmp # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:43.198105295 +0800 # umount /mnt # mount /dev/loop1 /mnt # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:23.412105981 +0800 We should update ctime of in-memory inode before calling btrfs_update_inode(). Signed-off-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 72d4616..40eaa9f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -252,11 +252,11 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg) trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); + btrfs_update_iflags(inode); + inode->i_ctime = CURRENT_TIME; ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); - btrfs_update_iflags(inode); - inode->i_ctime = CURRENT_TIME; btrfs_end_transaction(trans, root); mnt_drop_write(file->f_path.mnt); -- cgit v0.10.2 From 8f3b65a3d66bcc086e1eb040b7545e70681f2ed1 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 09:29:43 -0500 Subject: Btrfs: add a cond_resched() into the worker loop If we have a constant stream of end_io completions or crc work, we can hit softlockup messages from the async helper threads. This adds a cond_resched() into the loop to avoid them. Signed-off-by: Chris Mason diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 7ec1409..203e849 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -331,7 +331,7 @@ again: run_ordered_completions(worker->workers, work); check_pending_worker_creates(worker); - + cond_resched(); } spin_lock_irq(&worker->lock); -- cgit v0.10.2 From ad19db71f498fd858dd84ce603efcf97e321f184 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Thu, 15 Dec 2011 10:09:07 -0500 Subject: BTRFS: Establish i_ops before calling d_instantiate The Smack LSM hook for security_d_instantiate checks the inode's i_op->getxattr value to determine if the containing filesystem supports extended attributes. The BTRFS filesystem sets the inode's i_op value only after it has instantiated the inode. This results in Smack incorrectly giving new BTRFS inodes attributes from the filesystem defaults on the assumption that values can't be stored on the filesystem. This patch moves the assignment of inode operation vectors ahead of the calls to d_instantiate, letting Smack know that the filesystem supports extended attributes. There should be no impact on the performance or behavior of BTRFS. Signed-off-by: Casey Schaufler Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4a31493..d4a9195 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4596,11 +4596,18 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + + inode->i_op = &btrfs_special_inode_operations; err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { - inode->i_op = &btrfs_special_inode_operations; init_special_inode(inode, inode->i_mode, rdev); btrfs_update_inode(trans, root, inode); } @@ -4654,14 +4661,21 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + inode->i_fop = &btrfs_file_operations; + inode->i_op = &btrfs_file_inode_operations; + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { inode->i_mapping->a_ops = &btrfs_aops; inode->i_mapping->backing_dev_info = &root->fs_info->bdi; - inode->i_fop = &btrfs_file_operations; - inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } out_unlock: @@ -7117,14 +7131,21 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + inode->i_fop = &btrfs_file_operations; + inode->i_op = &btrfs_file_inode_operations; + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { inode->i_mapping->a_ops = &btrfs_aops; inode->i_mapping->backing_dev_info = &root->fs_info->bdi; - inode->i_fop = &btrfs_file_operations; - inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } if (drop_inode) -- cgit v0.10.2 From 0dc3b84a73267f47a75468f924f5d58a840e3152 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 18 Nov 2011 14:37:27 -0500 Subject: Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 7ec1409..af8e117 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -64,6 +64,8 @@ struct btrfs_worker_thread { int idle; }; +static int __btrfs_start_workers(struct btrfs_workers *workers); + /* * btrfs_start_workers uses kthread_run, which can block waiting for memory * for a very long time. It will actually throttle on page writeback, @@ -88,27 +90,10 @@ static void start_new_worker_func(struct btrfs_work *work) { struct worker_start *start; start = container_of(work, struct worker_start, work); - btrfs_start_workers(start->queue, 1); + __btrfs_start_workers(start->queue); kfree(start); } -static int start_new_worker(struct btrfs_workers *queue) -{ - struct worker_start *start; - int ret; - - start = kzalloc(sizeof(*start), GFP_NOFS); - if (!start) - return -ENOMEM; - - start->work.func = start_new_worker_func; - start->queue = queue; - ret = btrfs_queue_worker(queue->atomic_worker_start, &start->work); - if (ret) - kfree(start); - return ret; -} - /* * helper function to move a thread onto the idle list after it * has finished some requests. @@ -153,12 +138,20 @@ static void check_busy_worker(struct btrfs_worker_thread *worker) static void check_pending_worker_creates(struct btrfs_worker_thread *worker) { struct btrfs_workers *workers = worker->workers; + struct worker_start *start; unsigned long flags; rmb(); if (!workers->atomic_start_pending) return; + start = kzalloc(sizeof(*start), GFP_NOFS); + if (!start) + return; + + start->work.func = start_new_worker_func; + start->queue = workers; + spin_lock_irqsave(&workers->lock, flags); if (!workers->atomic_start_pending) goto out; @@ -170,10 +163,11 @@ static void check_pending_worker_creates(struct btrfs_worker_thread *worker) workers->num_workers_starting += 1; spin_unlock_irqrestore(&workers->lock, flags); - start_new_worker(workers); + btrfs_queue_worker(workers->atomic_worker_start, &start->work); return; out: + kfree(start); spin_unlock_irqrestore(&workers->lock, flags); } @@ -462,56 +456,55 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max, * starts new worker threads. This does not enforce the max worker * count in case you need to temporarily go past it. */ -static int __btrfs_start_workers(struct btrfs_workers *workers, - int num_workers) +static int __btrfs_start_workers(struct btrfs_workers *workers) { struct btrfs_worker_thread *worker; int ret = 0; - int i; - for (i = 0; i < num_workers; i++) { - worker = kzalloc(sizeof(*worker), GFP_NOFS); - if (!worker) { - ret = -ENOMEM; - goto fail; - } + worker = kzalloc(sizeof(*worker), GFP_NOFS); + if (!worker) { + ret = -ENOMEM; + goto fail; + } - INIT_LIST_HEAD(&worker->pending); - INIT_LIST_HEAD(&worker->prio_pending); - INIT_LIST_HEAD(&worker->worker_list); - spin_lock_init(&worker->lock); - - atomic_set(&worker->num_pending, 0); - atomic_set(&worker->refs, 1); - worker->workers = workers; - worker->task = kthread_run(worker_loop, worker, - "btrfs-%s-%d", workers->name, - workers->num_workers + i); - if (IS_ERR(worker->task)) { - ret = PTR_ERR(worker->task); - kfree(worker); - goto fail; - } - spin_lock_irq(&workers->lock); - list_add_tail(&worker->worker_list, &workers->idle_list); - worker->idle = 1; - workers->num_workers++; - workers->num_workers_starting--; - WARN_ON(workers->num_workers_starting < 0); - spin_unlock_irq(&workers->lock); + INIT_LIST_HEAD(&worker->pending); + INIT_LIST_HEAD(&worker->prio_pending); + INIT_LIST_HEAD(&worker->worker_list); + spin_lock_init(&worker->lock); + + atomic_set(&worker->num_pending, 0); + atomic_set(&worker->refs, 1); + worker->workers = workers; + worker->task = kthread_run(worker_loop, worker, + "btrfs-%s-%d", workers->name, + workers->num_workers + 1); + if (IS_ERR(worker->task)) { + ret = PTR_ERR(worker->task); + kfree(worker); + goto fail; } + spin_lock_irq(&workers->lock); + list_add_tail(&worker->worker_list, &workers->idle_list); + worker->idle = 1; + workers->num_workers++; + workers->num_workers_starting--; + WARN_ON(workers->num_workers_starting < 0); + spin_unlock_irq(&workers->lock); + return 0; fail: - btrfs_stop_workers(workers); + spin_lock_irq(&workers->lock); + workers->num_workers_starting--; + spin_unlock_irq(&workers->lock); return ret; } -int btrfs_start_workers(struct btrfs_workers *workers, int num_workers) +int btrfs_start_workers(struct btrfs_workers *workers) { spin_lock_irq(&workers->lock); - workers->num_workers_starting += num_workers; + workers->num_workers_starting++; spin_unlock_irq(&workers->lock); - return __btrfs_start_workers(workers, num_workers); + return __btrfs_start_workers(workers); } /* @@ -568,6 +561,7 @@ static struct btrfs_worker_thread *find_worker(struct btrfs_workers *workers) struct btrfs_worker_thread *worker; unsigned long flags; struct list_head *fallback; + int ret; again: spin_lock_irqsave(&workers->lock, flags); @@ -584,7 +578,9 @@ again: workers->num_workers_starting++; spin_unlock_irqrestore(&workers->lock, flags); /* we're below the limit, start another worker */ - __btrfs_start_workers(workers, 1); + ret = __btrfs_start_workers(workers); + if (ret) + goto fallback; goto again; } } @@ -665,7 +661,7 @@ void btrfs_set_work_high_prio(struct btrfs_work *work) /* * places a struct btrfs_work into the pending queue of one of the kthreads */ -int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) +void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) { struct btrfs_worker_thread *worker; unsigned long flags; @@ -673,7 +669,7 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) /* don't requeue something already on a list */ if (test_and_set_bit(WORK_QUEUED_BIT, &work->flags)) - goto out; + return; worker = find_worker(workers); if (workers->ordered) { @@ -712,7 +708,4 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) if (wake) wake_up_process(worker->task); spin_unlock_irqrestore(&worker->lock, flags); - -out: - return 0; } diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h index 5077746..f34cc31 100644 --- a/fs/btrfs/async-thread.h +++ b/fs/btrfs/async-thread.h @@ -109,8 +109,8 @@ struct btrfs_workers { char *name; }; -int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work); -int btrfs_start_workers(struct btrfs_workers *workers, int num_workers); +void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work); +int btrfs_start_workers(struct btrfs_workers *workers); int btrfs_stop_workers(struct btrfs_workers *workers); void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max, struct btrfs_workers *async_starter); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 94abc25..3f9d555 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2194,19 +2194,27 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->endio_meta_write_workers.idle_thresh = 2; fs_info->readahead_workers.idle_thresh = 2; - btrfs_start_workers(&fs_info->workers, 1); - btrfs_start_workers(&fs_info->generic_worker, 1); - btrfs_start_workers(&fs_info->submit_workers, 1); - btrfs_start_workers(&fs_info->delalloc_workers, 1); - btrfs_start_workers(&fs_info->fixup_workers, 1); - btrfs_start_workers(&fs_info->endio_workers, 1); - btrfs_start_workers(&fs_info->endio_meta_workers, 1); - btrfs_start_workers(&fs_info->endio_meta_write_workers, 1); - btrfs_start_workers(&fs_info->endio_write_workers, 1); - btrfs_start_workers(&fs_info->endio_freespace_worker, 1); - btrfs_start_workers(&fs_info->delayed_workers, 1); - btrfs_start_workers(&fs_info->caching_workers, 1); - btrfs_start_workers(&fs_info->readahead_workers, 1); + /* + * btrfs_start_workers can really only fail because of ENOMEM so just + * return -ENOMEM if any of these fail. + */ + ret = btrfs_start_workers(&fs_info->workers); + ret |= btrfs_start_workers(&fs_info->generic_worker); + ret |= btrfs_start_workers(&fs_info->submit_workers); + ret |= btrfs_start_workers(&fs_info->delalloc_workers); + ret |= btrfs_start_workers(&fs_info->fixup_workers); + ret |= btrfs_start_workers(&fs_info->endio_workers); + ret |= btrfs_start_workers(&fs_info->endio_meta_workers); + ret |= btrfs_start_workers(&fs_info->endio_meta_write_workers); + ret |= btrfs_start_workers(&fs_info->endio_write_workers); + ret |= btrfs_start_workers(&fs_info->endio_freespace_worker); + ret |= btrfs_start_workers(&fs_info->delayed_workers); + ret |= btrfs_start_workers(&fs_info->caching_workers); + ret |= btrfs_start_workers(&fs_info->readahead_workers); + if (ret) { + ret = -ENOMEM; + goto fail_sb_buffer; + } fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super); fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages, diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index c27bcb6..ddf2c90 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1535,18 +1535,22 @@ static noinline_for_stack int scrub_supers(struct scrub_dev *sdev) static noinline_for_stack int scrub_workers_get(struct btrfs_root *root) { struct btrfs_fs_info *fs_info = root->fs_info; + int ret = 0; mutex_lock(&fs_info->scrub_lock); if (fs_info->scrub_workers_refcnt == 0) { btrfs_init_workers(&fs_info->scrub_workers, "scrub", fs_info->thread_pool_size, &fs_info->generic_worker); fs_info->scrub_workers.idle_thresh = 4; - btrfs_start_workers(&fs_info->scrub_workers, 1); + ret = btrfs_start_workers(&fs_info->scrub_workers); + if (ret) + goto out; } ++fs_info->scrub_workers_refcnt; +out: mutex_unlock(&fs_info->scrub_lock); - return 0; + return ret; } static noinline_for_stack void scrub_workers_put(struct btrfs_root *root) -- cgit v0.10.2 From 22c44fe65adacd20a174f3f54686509ee94ef7be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 30 Nov 2011 10:45:38 -0500 Subject: Btrfs: deal with enospc from dirtying inodes properly Now that we're properly keeping track of delayed inode space we've been getting a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is because a bunch of people call mark_inode_dirty, which is void so we can't return ENOSPC. This needs to be fixed in a few areas 1) file_update_time - this updates the mtime and such when writing to a file, which will call mark_inode_dirty. So copy file_update_time into btrfs so we can call btrfs_dirty_inode directly and return an error if we get one appropriately. 2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't setting ->setattr for symlinks, even though we should have been. This catches one of the cases where we were getting errors in mark_inode_dirty. 3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly instead of mark_inode_dirty. This lets us return errors properly for truncate and chown/anything related to setattr. 4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and print an error if we have one. The only remaining user we can't control for this is touch_atime(), but we don't really want to keep people from walking down the tree if we don't have space to save the atime update, so just complain but don't worry about it. With this patch xfstests 83 complains a handful of times instead of hundreds of times. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 50634abe..6738503 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2692,7 +2692,8 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); int btrfs_readpage(struct file *file, struct page *page); void btrfs_evict_inode(struct inode *inode); int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc); -void btrfs_dirty_inode(struct inode *inode, int flags); +int btrfs_dirty_inode(struct inode *inode); +int btrfs_update_time(struct file *file); struct inode *btrfs_alloc_inode(struct super_block *sb); void btrfs_destroy_inode(struct inode *inode); int btrfs_drop_inode(struct inode *inode); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index f2e9282..cc7492c 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1387,7 +1387,11 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb, goto out; } - file_update_time(file); + err = btrfs_update_time(file); + if (err) { + mutex_unlock(&inode->i_mutex); + goto out; + } BTRFS_I(inode)->sequence++; start_pos = round_down(pos, root->sectorsize); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c5ccec2..eec33b9 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "compat.h" #include "ctree.h" #include "disk-io.h" @@ -3386,7 +3387,7 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) return ret; } - mark_inode_dirty(inode); + ret = btrfs_dirty_inode(inode); } else { /* @@ -3426,9 +3427,9 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) if (attr->ia_valid) { setattr_copy(inode, attr); - mark_inode_dirty(inode); + err = btrfs_dirty_inode(inode); - if (attr->ia_valid & ATTR_MODE) + if (!err && attr->ia_valid & ATTR_MODE) err = btrfs_acl_chmod(inode); } @@ -4204,42 +4205,80 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) * FIXME, needs more benchmarking...there are no reasons other than performance * to keep or drop this code. */ -void btrfs_dirty_inode(struct inode *inode, int flags) +int btrfs_dirty_inode(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_trans_handle *trans; int ret; if (BTRFS_I(inode)->dummy_inode) - return; + return 0; trans = btrfs_join_transaction(root); - BUG_ON(IS_ERR(trans)); + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_update_inode(trans, root, inode); if (ret && ret == -ENOSPC) { /* whoops, lets try again with the full transaction */ btrfs_end_transaction(trans, root); trans = btrfs_start_transaction(root, 1); - if (IS_ERR(trans)) { - printk_ratelimited(KERN_ERR "btrfs: fail to " - "dirty inode %llu error %ld\n", - (unsigned long long)btrfs_ino(inode), - PTR_ERR(trans)); - return; - } + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_update_inode(trans, root, inode); - if (ret) { - printk_ratelimited(KERN_ERR "btrfs: fail to " - "dirty inode %llu error %d\n", - (unsigned long long)btrfs_ino(inode), - ret); - } } btrfs_end_transaction(trans, root); if (BTRFS_I(inode)->delayed_node) btrfs_balance_delayed_items(root); + + return ret; +} + +/* + * This is a copy of file_update_time. We need this so we can return error on + * ENOSPC for updating the inode in the case of file write and mmap writes. + */ +int btrfs_update_time(struct file *file) +{ + struct inode *inode = file->f_path.dentry->d_inode; + struct timespec now; + int ret; + enum { S_MTIME = 1, S_CTIME = 2, S_VERSION = 4 } sync_it = 0; + + /* First try to exhaust all avenues to not sync */ + if (IS_NOCMTIME(inode)) + return 0; + + now = current_fs_time(inode->i_sb); + if (!timespec_equal(&inode->i_mtime, &now)) + sync_it = S_MTIME; + + if (!timespec_equal(&inode->i_ctime, &now)) + sync_it |= S_CTIME; + + if (IS_I_VERSION(inode)) + sync_it |= S_VERSION; + + if (!sync_it) + return 0; + + /* Finally allowed to write? Takes lock. */ + if (mnt_want_write_file(file)) + return 0; + + /* Only change inode inside the lock region */ + if (sync_it & S_VERSION) + inode_inc_iversion(inode); + if (sync_it & S_CTIME) + inode->i_ctime = now; + if (sync_it & S_MTIME) + inode->i_mtime = now; + ret = btrfs_dirty_inode(inode); + if (!ret) + mark_inode_dirty_sync(inode); + mnt_drop_write(file->f_path.mnt); + return ret; } /* @@ -6304,6 +6343,8 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) u64 page_end; ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); + if (!ret) + ret = btrfs_update_time(vma->vm_file); if (ret) { if (ret == -ENOMEM) ret = VM_FAULT_OOM; @@ -7353,6 +7394,7 @@ static const struct inode_operations btrfs_symlink_inode_operations = { .follow_link = page_follow_link_light, .put_link = page_put_link, .getattr = btrfs_getattr, + .setattr = btrfs_setattr, .permission = btrfs_permission, .setxattr = btrfs_setxattr, .getxattr = btrfs_getxattr, diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 1a3ce9e..05b4045 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "compat.h" #include "delayed-inode.h" #include "ctree.h" @@ -1290,6 +1291,16 @@ static int btrfs_unfreeze(struct super_block *sb) return 0; } +static void btrfs_fs_dirty_inode(struct inode *inode, int flags) +{ + int ret; + + ret = btrfs_dirty_inode(inode); + if (ret) + printk_ratelimited(KERN_ERR "btrfs: fail to dirty inode %Lu " + "error %d\n", btrfs_ino(inode), ret); +} + static const struct super_operations btrfs_super_ops = { .drop_inode = btrfs_drop_inode, .evict_inode = btrfs_evict_inode, @@ -1297,7 +1308,7 @@ static const struct super_operations btrfs_super_ops = { .sync_fs = btrfs_sync_fs, .show_options = btrfs_show_options, .write_inode = btrfs_write_inode, - .dirty_inode = btrfs_dirty_inode, + .dirty_inode = btrfs_fs_dirty_inode, .alloc_inode = btrfs_alloc_inode, .destroy_inode = btrfs_destroy_inode, .statfs = btrfs_statfs, -- cgit v0.10.2 From 660d3f6cde552323578b85fc5a09a6742f1fe804 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 9 Dec 2011 11:18:51 -0500 Subject: Btrfs: fix how we do delalloc reservations and how we free reservations on error Running xfstests 269 with some tracing my scripts kept spitting out errors about releasing bytes that we didn't actually have reserved. This took me down a huge rabbit hole and it turns out the way we deal with reserved_extents is wrong, we need to only be setting it if the reservation succeeds, otherwise the free() method will come in and unreserve space that isn't actually reserved yet, which can lead to other warnings and such. The math was all working out right in the end, but it caused all sorts of other issues in addition to making my scripts yell and scream and generally make it impossible for me to track down the original issue I was looking for. The other problem is with our error handling in the reservation code. There are two cases that we need to deal with 1) We raced with free. In this case free won't free anything because csum_bytes is modified before we dro the lock in our reservation path, so free rightly doesn't release any space because the reservation code may be depending on that reservation. However if we fail, we need the reservation side to do the free at that point since that space is no longer in use. So as it stands the code was doing this fine and it worked out, except in case #2 2) We don't race with free. Nobody comes in and changes anything, and our reservation fails. In this case we didn't reserve anything anyway and we just need to clean up csum_bytes but not free anything. So we keep track of csum_bytes before we drop the lock and if it hasn't changed we know we can just decrement csum_bytes and carry on. Because of the case where we can race with free()'s since we have to drop our spin_lock to do the reservation, I'm going to serialize all reservations with the i_mutex. We already get this for free in the heavy use paths, truncate and file write all hold the i_mutex, just needed to add it to page_mkwrite and various ioctl/balance things. With this patch my space leak scripts no longer scream bloody murder. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 05e1386..4eb4d27 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4203,12 +4203,17 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv; u64 to_reserve = 0; + u64 csum_bytes; unsigned nr_extents = 0; + int extra_reserve = 0; int flush = 1; int ret; + /* Need to be holding the i_mutex here if we aren't free space cache */ if (btrfs_is_free_space_inode(root, inode)) flush = 0; + else + WARN_ON(!mutex_is_locked(&inode->i_mutex)); if (flush && btrfs_transaction_in_commit(root->fs_info)) schedule_timeout(1); @@ -4219,11 +4224,9 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) BTRFS_I(inode)->outstanding_extents++; if (BTRFS_I(inode)->outstanding_extents > - BTRFS_I(inode)->reserved_extents) { + BTRFS_I(inode)->reserved_extents) nr_extents = BTRFS_I(inode)->outstanding_extents - BTRFS_I(inode)->reserved_extents; - BTRFS_I(inode)->reserved_extents += nr_extents; - } /* * Add an item to reserve for updating the inode when we complete the @@ -4231,11 +4234,12 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) */ if (!BTRFS_I(inode)->delalloc_meta_reserved) { nr_extents++; - BTRFS_I(inode)->delalloc_meta_reserved = 1; + extra_reserve = 1; } to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); to_reserve += calc_csum_metadata_size(inode, num_bytes, 1); + csum_bytes = BTRFS_I(inode)->csum_bytes; spin_unlock(&BTRFS_I(inode)->lock); ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush); @@ -4245,22 +4249,35 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) spin_lock(&BTRFS_I(inode)->lock); dropped = drop_outstanding_extent(inode); - to_free = calc_csum_metadata_size(inode, num_bytes, 0); - spin_unlock(&BTRFS_I(inode)->lock); - to_free += btrfs_calc_trans_metadata_size(root, dropped); - /* - * Somebody could have come in and twiddled with the - * reservation, so if we have to free more than we would have - * reserved from this reservation go ahead and release those - * bytes. + * If the inodes csum_bytes is the same as the original + * csum_bytes then we know we haven't raced with any free()ers + * so we can just reduce our inodes csum bytes and carry on. + * Otherwise we have to do the normal free thing to account for + * the case that the free side didn't free up its reserve + * because of this outstanding reservation. */ - to_free -= to_reserve; + if (BTRFS_I(inode)->csum_bytes == csum_bytes) + calc_csum_metadata_size(inode, num_bytes, 0); + else + to_free = calc_csum_metadata_size(inode, num_bytes, 0); + spin_unlock(&BTRFS_I(inode)->lock); + if (dropped) + to_free += btrfs_calc_trans_metadata_size(root, dropped); + if (to_free) btrfs_block_rsv_release(root, block_rsv, to_free); return ret; } + spin_lock(&BTRFS_I(inode)->lock); + if (extra_reserve) { + BTRFS_I(inode)->delalloc_meta_reserved = 1; + nr_extents--; + } + BTRFS_I(inode)->reserved_extents += nr_extents; + spin_unlock(&BTRFS_I(inode)->lock); + block_rsv_add_bytes(block_rsv, to_reserve, 1); return 0; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index eec33b9..8938174 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2192,7 +2192,14 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) continue; } nr_truncate++; + /* + * Need to hold the imutex for reservation purposes, not + * a huge deal here but I have a WARN_ON in + * btrfs_delalloc_reserve_space to catch offenders. + */ + mutex_lock(&inode->i_mutex); ret = btrfs_truncate(inode); + mutex_unlock(&inode->i_mutex); } else { nr_unlink++; } @@ -6342,7 +6349,10 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) u64 page_start; u64 page_end; + /* Need this to keep space reservations serialized */ + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); + mutex_unlock(&inode->i_mutex); if (!ret) ret = btrfs_update_time(vma->vm_file); if (ret) { diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 72d4616..dd88916 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -858,8 +858,10 @@ static int cluster_pages_for_defrag(struct inode *inode, return 0; file_end = (isize - 1) >> PAGE_CACHE_SHIFT; + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_space(inode, num_pages << PAGE_CACHE_SHIFT); + mutex_unlock(&inode->i_mutex); if (ret) return ret; again: diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index dff29d5..cfb5543 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2947,7 +2947,9 @@ static int relocate_file_extent_cluster(struct inode *inode, index = (cluster->start - offset) >> PAGE_CACHE_SHIFT; last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT; while (index <= last_index) { + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_metadata(inode, PAGE_CACHE_SIZE); + mutex_unlock(&inode->i_mutex); if (ret) goto out; -- cgit v0.10.2 From 7041ee97281c30a78658904140c7bd9373a36142 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 9 Dec 2011 13:26:22 -0500 Subject: Btrfs: fix leaked space in truncate We were occasionaly leaking space when running xfstest 269. This is because if we failed to start the transaction in the truncate loop we'd just goto out, but we need to break so that the inode is removed from the orphan list and the space is properly freed. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8938174..6349c63 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6566,8 +6566,9 @@ static int btrfs_truncate(struct inode *inode) /* Just need the 1 for updating the inode */ trans = btrfs_start_transaction(root, 1); if (IS_ERR(trans)) { - err = PTR_ERR(trans); - goto out; + ret = err = PTR_ERR(trans); + trans = NULL; + break; } } -- cgit v0.10.2 From ee4d89f0c4967c624c92516fcc37b41069bfdc23 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 13 Dec 2011 12:55:58 -0500 Subject: Btrfs: don't panic if orphan item already exists I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in a loop. This is because we will add an orphan item, do the truncate, the truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're left with an orphan item still in the fs. Then we come back later to do another truncate and it blows up because we already have an orphan item. This is ok so just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6349c63..b212f39 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2032,7 +2032,7 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode) /* insert an orphan item to track this unlinked/truncated file */ if (insert >= 1) { ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode)); - BUG_ON(ret); + BUG_ON(ret && ret != -EEXIST); } /* insert an orphan item to track subvolume contains orphan files */ -- cgit v0.10.2 From e65cbb94e036058128a5dec6398be2fd64cf88ba Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 13 Dec 2011 16:04:54 -0500 Subject: Btrfs: only set cache_generation if we setup the block group A user reported a problem booting into a new kernel with the old format inodes. He was panicing in cow_file_range while writing out the inode cache. This is because if the block group is not cached we'll just skip writing out the cache, however if it gets dirtied again in the same transaction and it finished caching we'd go ahead and write it out, but since we set cache_generation to the transid we think we've already truncated it and will just carry on, running into cow_file_range and blowing up. We need to make sure we only set cache_generation if we've done the truncate. The user tested this patch and verified that the panic no longer occured. Thanks, Reported-and-Tested-by: Klaus Bitto Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4eb4d27..8603ee4 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2822,7 +2822,7 @@ out_free: btrfs_release_path(path); out: spin_lock(&block_group->lock); - if (!ret) + if (!ret && dcs == BTRFS_DC_SETUP) block_group->cache_generation = trans->transid; block_group->disk_cache_state = dcs; spin_unlock(&block_group->lock); -- cgit v0.10.2 From d3db728125c4470a2d061ac10fa7395e18237263 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 14 Dec 2011 12:16:08 +0000 Subject: xen: only limit memory map to maximum reservation for domain 0. d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin Signed-off-by: Ian Campbell Cc: stable@kernel.org Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4..a54ff1a 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void) domid_t domid = DOMID_SELF; int ret; - ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); - if (ret > 0) - max_pages = ret; + /* + * For the initial domain we use the maximum reservation as + * the maximum page. + * + * For guest domains the current maximum reservation reflects + * the current maximum rather than the static maximum. In this + * case the e820 map provided to us will cover the static + * maximum region. + */ + if (xen_initial_domain()) { + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + } + return min(max_pages, MAX_DOMAIN_PAGES); } -- cgit v0.10.2 From 63a741757d15320a25ebf5778f8651cce2ed0611 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 15 Dec 2011 11:28:46 -0500 Subject: xen/swiotlb: Use page alignment for early buffer allocation. This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. CC: stable@kernel.org Suggested-by: "Kalev, Leonid" Reported-and-Tested-by: "Taylor, Neal E" Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 8e964b9..284798a 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -166,7 +166,7 @@ retry: /* * Get IO TLB memory from any location. */ - xen_io_tlb_start = alloc_bootmem(bytes); + xen_io_tlb_start = alloc_bootmem_pages(PAGE_ALIGN(bytes)); if (!xen_io_tlb_start) { m = "Cannot allocate Xen-SWIOTLB buffer!\n"; goto error; @@ -179,7 +179,7 @@ retry: bytes, xen_io_tlb_nslabs); if (rc) { - free_bootmem(__pa(xen_io_tlb_start), bytes); + free_bootmem(__pa(xen_io_tlb_start), PAGE_ALIGN(bytes)); m = "Failed to get contiguous memory for DMA from Xen!\n"\ "You either: don't have the permissions, do not have"\ " enough free memory under 4GB, or the hypervisor memory"\ -- cgit v0.10.2 From 87b9b0e0d50db3282fb1eb702307ccfca8775744 Mon Sep 17 00:00:00 2001 From: Ashish Jangam Date: Thu, 15 Dec 2011 14:55:46 +0530 Subject: gpio: Fix DA9052 GPIO build errors. This patch is functionally tested on Samsung SMDKV6410. Reported-by: Stephen Rothwell Signed-off-by: David Dajun Chen Signed-off-by: Ashish Jangam [grant.likely: don't create an unnecessary header file] Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c index 038f5eb..f8ce29e 100644 --- a/drivers/gpio/gpio-da9052.c +++ b/drivers/gpio/gpio-da9052.c @@ -22,7 +22,6 @@ #include #include #include -#include #define DA9052_INPUT 1 #define DA9052_OUTPUT_OPENDRAIN 2 @@ -43,6 +42,9 @@ #define DA9052_GPIO_MASK_UPPER_NIBBLE 0xF0 #define DA9052_GPIO_MASK_LOWER_NIBBLE 0x0F #define DA9052_GPIO_NIBBLE_SHIFT 4 +#define DA9052_IRQ_GPI0 16 +#define DA9052_GPIO_ODD_SHIFT 7 +#define DA9052_GPIO_EVEN_SHIFT 3 struct da9052_gpio { struct da9052 *da9052; @@ -104,33 +106,26 @@ static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset) static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { struct da9052_gpio *gpio = to_da9052_gpio(gc); - unsigned char register_value = 0; int ret; if (da9052_gpio_port_odd(offset)) { - if (value) { - register_value = DA9052_GPIO_ODD_PORT_MODE; ret = da9052_reg_update(gpio->da9052, (offset >> 1) + DA9052_GPIO_0_1_REG, DA9052_GPIO_ODD_PORT_MODE, - register_value); + value << DA9052_GPIO_ODD_SHIFT); if (ret != 0) dev_err(gpio->da9052->dev, "Failed to updated gpio odd reg,%d", ret); - } } else { - if (value) { - register_value = DA9052_GPIO_EVEN_PORT_MODE; ret = da9052_reg_update(gpio->da9052, (offset >> 1) + DA9052_GPIO_0_1_REG, DA9052_GPIO_EVEN_PORT_MODE, - register_value); + value << DA9052_GPIO_EVEN_SHIFT); if (ret != 0) dev_err(gpio->da9052->dev, "Failed to updated gpio even reg,%d", ret); - } } } @@ -201,9 +196,9 @@ static struct gpio_chip reference_gp __devinitdata = { .direction_input = da9052_gpio_direction_input, .direction_output = da9052_gpio_direction_output, .to_irq = da9052_gpio_to_irq, - .can_sleep = 1; - .ngpio = 16; - .base = -1; + .can_sleep = 1, + .ngpio = 16, + .base = -1, }; static int __devinit da9052_gpio_probe(struct platform_device *pdev) -- cgit v0.10.2 From e755d9ab387c4c2401dce5b6f435432a829f41cb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 13:36:29 -0500 Subject: Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code btrfs_update_inode is sometimes called with a null reservation. Signed-off-by: Chris Mason diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 6a1a680..c7ddf8a 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -640,8 +640,8 @@ static int btrfs_delayed_inode_reserve_metadata( * Now if src_rsv == delalloc_block_rsv we'll let it just steal since * we're accounted for. */ - if (!trans->bytes_reserved && - src_rsv != &root->fs_info->delalloc_block_rsv) { + if (!src_rsv || (!trans->bytes_reserved && + src_rsv != &root->fs_info->delalloc_block_rsv)) { ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes); /* * Since we're under a transaction reserve_metadata_bytes could -- cgit v0.10.2 From 4eabc941259f9d8c8fb71746d3f30c87e1d9e49b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 15 Dec 2011 20:03:04 +0100 Subject: block: don't kick empty queue in blk_drain_queue() While probing, fd sets up queue, probes hardware and tears down the queue if probing fails. In the process, blk_drain_queue() kicks the queue which failed to finish initialization and fd is unhappy about that. floppy0: no floppy controllers found ------------[ cut here ]------------ WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0() Hardware name: To Be Filled By O.E.M. VFS: do_fd_request called on non-open device Modules linked in: Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] do_fd_request+0xbf/0xd0 [] blk_drain_queue+0x65/0x80 [] blk_cleanup_queue+0xe3/0x1a0 [] floppy_init+0xdeb/0xe28 [] ? daring+0x6b/0x6b [] do_one_initcall+0x3f/0x170 [] kernel_init+0x9d/0x11e [] ? schedule_tail+0x22/0xa0 [] kernel_thread_helper+0x4/0x10 [] ? start_kernel+0x2be/0x2be [] ? gs_change+0xb/0xb Avoid it by making blk_drain_queue() kick queue iff dispatch queue has something on it. Signed-off-by: Tejun Heo Reported-by: Ralf Hildebrandt Reported-by: Wu Fengguang Tested-by: Sergei Trofimovich Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 20d69f6..15de223 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -366,7 +366,14 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) if (drain_all) blk_throtl_drain(q); - __blk_run_queue(q); + /* + * This function might be called on a queue which failed + * driver init after queue creation. Some drivers + * (e.g. fd) get unhappy in such cases. Kick queue iff + * dispatch queue has something on it. + */ + if (!list_empty(&q->queue_head)) + __blk_run_queue(q); if (drain_all) nr_rqs = q->rq.count[0] + q->rq.count[1]; -- cgit v0.10.2 From d85c8a6f1bc083279215ff6e79b7c292bf3ec905 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 15:38:41 -0500 Subject: Btrfs: unplug every once and a while The btrfs io submission threads can build up massive plug lists. This keeps things more reasonable so we don't hand over huge dumps of IO at once. Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 91ea57a..f4b839f 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -295,6 +295,12 @@ loop_lock: btrfs_requeue_work(&device->work); goto done; } + /* unplug every 64 requests just for good measure */ + if (batch_run % 64 == 0) { + blk_finish_plug(&plug); + blk_start_plug(&plug); + sync_pending = 0; + } } cond_resched(); -- cgit v0.10.2 From ddf5a25c5fdd4cc276edf451871c38002eec0f95 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 15 Dec 2011 21:47:56 +0100 Subject: ARM: unwinder: fix bisection to find origin in .idx section MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Torvalds diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3f03fe0..00df012 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -160,12 +160,12 @@ static const struct unwind_idx *unwind_find_origin( const struct unwind_idx *start, const struct unwind_idx *stop) { pr_debug("%s(%p, %p)\n", __func__, start, stop); - while (start < stop - 1) { + while (start < stop) { const struct unwind_idx *mid = start + ((stop - start) >> 1); if (mid->addr_offset >= 0x40000000) /* negative offset */ - start = mid; + start = mid + 1; else /* positive offset */ stop = mid; -- cgit v0.10.2 From 0999bbe08196cd9459683204974fda4d62a7d1b3 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 28 Nov 2011 12:22:56 -0500 Subject: drm/i915: no-lvds quirk for ASUS AT5NM10T-I https://bugzilla.redhat.com/show_bug.cgi?id=750006 Signed-off-by: Adam Jackson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 42f165a..e441911 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -715,6 +715,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Asus AT5NM10T-I", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"), + }, + }, { } /* terminating entry */ }; -- cgit v0.10.2 From 3573c4103f7a486838bb6b5b8353788103f91802 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 14 Oct 2011 18:16:22 -0300 Subject: drm/i915: set the right SDVO transcoder for CPT v2: add a CPT-specific macro, make code cleaner v3: fix commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272 Cc: stable@kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 6ef68c7..a26d5b0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3303,10 +3303,10 @@ /* or SDVOB */ #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) -#define TRANSCODER_A (0) -#define TRANSCODER_B (1 << 30) -#define TRANSCODER(pipe) ((pipe) << 30) -#define TRANSCODER_MASK (1 << 30) +#define TRANSCODER(pipe) ((pipe) << 30) +#define TRANSCODER_CPT(pipe) ((pipe) << 29) +#define TRANSCODER_MASK (1 << 30) +#define TRANSCODER_MASK_CPT (3 << 29) #define COLOR_FORMAT_8bpc (0) #define COLOR_FORMAT_12bpc (3 << 26) #define SDVOB_HOTPLUG_ENABLE (1 << 23) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 3003fb2..e308d67 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1086,8 +1086,12 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, } sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; } - if (intel_crtc->pipe == 1) - sdvox |= SDVO_PIPE_B_SELECT; + + if (INTEL_PCH_TYPE(dev) >= PCH_CPT) + sdvox |= TRANSCODER_CPT(intel_crtc->pipe); + else + sdvox |= TRANSCODER(intel_crtc->pipe); + if (intel_sdvo->has_hdmi_audio) sdvox |= SDVO_AUDIO_ENABLE; -- cgit v0.10.2 From 03d00ac53f9bcde06ff7e33d6676083c18d569a4 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 14 Oct 2011 18:17:41 -0300 Subject: drm/i915: add PCH info to i915_capabilities Signed-off-by: Chris Wilson Signed-off-by: Paulo Zanoni Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index d09a6e0..004b048 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -62,6 +62,7 @@ static int i915_capabilities(struct seq_file *m, void *data) const struct intel_device_info *info = INTEL_INFO(dev); seq_printf(m, "gen: %d\n", info->gen); + seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev)); #define B(x) seq_printf(m, #x ": %s\n", yesno(info->x)) B(is_mobile); B(is_i85x); -- cgit v0.10.2 From 4ed0b577457eb6aeb7cdc7e7316576e63d15abb2 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Thu, 10 Nov 2011 13:55:15 -0200 Subject: drm/i915: prevent division by zero when asking for chipset power This prevents an in-kernel division by zero which happens when we are asking for i915_chipset_val too quickly, or within a race condition between the power monitoring thread and userspace accesses via debugfs. The issue can be reproduced easily via the following command: while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done This is particularly dangerous because it can be triggered by a non-privileged user by just reading the debugfs entry. This issue was also found independently by Konstantin Belousov , who proposed a similar patch. Reported-by: Konstantin Belousov Acked-by: Jesse Barnes Acked-by: Keith Packard Reviewed-by: Chris Wilson Cc: Signed-off-by: Eugeni Dodonov Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index a9533c5..a9ae374 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1454,6 +1454,14 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) diff1 = now - dev_priv->last_time1; + /* Prevent division-by-zero if we are asking too fast. + * Also, we don't get interesting results if we are polling + * faster than once in 10ms, so just return the saved value + * in such cases. + */ + if (diff1 <= 10) + return dev_priv->chipset_power; + count1 = I915_READ(DMIEC); count2 = I915_READ(DDREC); count3 = I915_READ(CSIEC); @@ -1484,6 +1492,8 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) dev_priv->last_count1 = total_count; dev_priv->last_time1 = now; + dev_priv->chipset_power = ret; + return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8ba88cf..39a72f6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -713,6 +713,7 @@ typedef struct drm_i915_private { u64 last_count1; unsigned long last_time1; + unsigned long chipset_power; u64 last_count2; struct timespec last_time2; unsigned long gfx_power; -- cgit v0.10.2 From 522200858093a6f31af9830672109f6d9807dd1e Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 20 Jun 2011 14:45:50 +0100 Subject: drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check We were checking whether the supplied edid matched the connector it was read from. We do this in case a DDC read returns an EDID for another device on a multifunction or otherwise interesting card. However, we failed to include LVDS as a digital device and so rejecting an otherwise valid EDID. Fixes the detection of the secondary SDVO LVDS panel on the Libretto W105. Signed-off-by: Chris Wilson Reviewed-by: Adam Jackson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216 Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e308d67..f7b9268 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -50,6 +50,7 @@ #define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK) #define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK) #define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK)) +#define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK)) static const char *tv_format_names[] = { @@ -1318,6 +1319,18 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector) return status; } +static bool +intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo, + struct edid *edid) +{ + bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); + bool connector_is_digital = !!IS_DIGITAL(sdvo); + + DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n", + connector_is_digital, monitor_is_digital); + return connector_is_digital == monitor_is_digital; +} + static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector, bool force) { @@ -1362,10 +1375,12 @@ intel_sdvo_detect(struct drm_connector *connector, bool force) if (edid == NULL) edid = intel_sdvo_get_analog_edid(connector); if (edid != NULL) { - if (edid->input & DRM_EDID_INPUT_DIGITAL) - ret = connector_status_disconnected; - else + if (intel_sdvo_connector_matches_edid(intel_sdvo_connector, + edid)) ret = connector_status_connected; + else + ret = connector_status_disconnected; + connector->display_info.raw_edid = NULL; kfree(edid); } else @@ -1406,11 +1421,8 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) edid = intel_sdvo_get_analog_edid(connector); if (edid != NULL) { - struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); - bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); - bool connector_is_digital = !!IS_TMDS(intel_sdvo_connector); - - if (connector_is_digital == monitor_is_digital) { + if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector), + edid)) { drm_mode_connector_update_edid_property(connector, edid); drm_add_edid_modes(connector, edid); } -- cgit v0.10.2 From 8bc1f85c02a20a59956b00b3acea12c04dce9ae8 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 23 Nov 2011 16:42:14 -0200 Subject: iommu: Export intel_iommu_enabled to signal when iommu is in use In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar is enabled. The new 'intel_iommu_enabled' variable signals when the iommu code is in operation. Cc: Ted Phelps Cc: Peter Cc: Lukas Hejtmanek Cc: Andrew Lutomirski CC: Daniel Vetter Cc: Eugeni Dodonov Signed-off-by: Keith Packard diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index c0c7820..8dc19b8 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -405,6 +405,9 @@ int dmar_disabled = 0; int dmar_disabled = 1; #endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/ +int intel_iommu_enabled = 0; +EXPORT_SYMBOL_GPL(intel_iommu_enabled); + static int dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; @@ -3647,6 +3650,8 @@ int __init intel_iommu_init(void) bus_register_notifier(&pci_bus_type, &device_nb); + intel_iommu_enabled = 1; + return 0; } diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h index ef90cbd..57c9a8a 100644 --- a/include/linux/dma_remapping.h +++ b/include/linux/dma_remapping.h @@ -31,6 +31,7 @@ extern void free_dmar_iommu(struct intel_iommu *iommu); extern int iommu_calculate_agaw(struct intel_iommu *iommu); extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu); extern int dmar_disabled; +extern int intel_iommu_enabled; #else static inline int iommu_calculate_agaw(struct intel_iommu *iommu) { @@ -44,6 +45,7 @@ static inline void free_dmar_iommu(struct intel_iommu *iommu) { } #define dmar_disabled (1) +#define intel_iommu_enabled (0) #endif -- cgit v0.10.2 From c0f372b3746d4ede07b2ace2beabd38d9c045b25 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 16 Nov 2011 22:24:52 -0800 Subject: drm/i915: By default, enable RC6 on IVB and SNB when reasonable RC6 should always work on IVB, and should work on SNB whenever IO remapping is disabled. RC6 never works on Ironlake. Make the default value for the parameter follow these guidelines. Setting the value to either 0 or 1 will force the specified behavior. Signed-off-by: Keith Packard Reviewed-by: Kenneth Graunke Reviewed-by: Eugeni Dodonov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Cc: Ted Phelps Cc: Peter Cc: Lukas Hejtmanek Cc: Andrew Lutomirski diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 28836fe..47a42eb 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -63,10 +63,10 @@ module_param_named(semaphores, i915_semaphores, int, 0600); MODULE_PARM_DESC(semaphores, "Use semaphores for inter-ring sync (default: false)"); -unsigned int i915_enable_rc6 __read_mostly = 0; +int i915_enable_rc6 __read_mostly = -1; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, - "Enable power-saving render C-state 6 (default: true)"); + "Enable power-saving render C-state 6 (default: -1 (use per-chip default)"); int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 39a72f6..6bcafb5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1006,7 +1006,7 @@ extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; -extern unsigned int i915_enable_rc6 __read_mostly; +extern int i915_enable_rc6 __read_mostly; extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 633c693..d544de9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -38,8 +38,8 @@ #include "i915_drv.h" #include "i915_trace.h" #include "drm_dp_helper.h" - #include "drm_crtc_helper.h" +#include #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) @@ -7887,6 +7887,33 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } +static bool intel_enable_rc6(struct drm_device *dev) +{ + /* + * Respect the kernel parameter if it is set + */ + if (i915_enable_rc6 >= 0) + return i915_enable_rc6; + + /* + * Disable RC6 on Ironlake + */ + if (INTEL_INFO(dev)->gen == 5) + return 0; + + /* + * Enable rc6 on Sandybridge if DMA remapping is disabled + */ + if (INTEL_INFO(dev)->gen == 6) { + DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", + intel_iommu_enabled ? "true" : "false", + !intel_iommu_enabled ? "en" : "dis"); + return !intel_iommu_enabled; + } + DRM_DEBUG_DRIVER("RC6 enabled\n"); + return 1; +} + void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); @@ -7923,7 +7950,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (i915_enable_rc6) + if (intel_enable_rc6(dev_priv->dev)) rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | GEN6_RC_CTL_RC6_ENABLE; @@ -8372,7 +8399,7 @@ void ironlake_enable_rc6(struct drm_device *dev) /* rc6 disabled by default due to repeated reports of hanging during * boot and resume. */ - if (!i915_enable_rc6) + if (!intel_enable_rc6(dev)) return; mutex_lock(&dev->struct_mutex); -- cgit v0.10.2 From 7317c75e66fce0c9f82fbe6f72f7e5256b315422 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 29 Aug 2011 09:45:28 -0700 Subject: drm/i915: don't set unpin_work if vblank_get fails This fixes a race where we may try to finish a page flip and decrement the refcount even if our vblank_get failed and we ended up with a spurious flip pending interrupt. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211. Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d544de9..91b5f87 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7189,11 +7189,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); + ret = drm_vblank_get(dev, intel_crtc->pipe); + if (ret) + goto free_work; + /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); + drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; @@ -7212,10 +7217,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, crtc->fb = fb; - ret = drm_vblank_get(dev, intel_crtc->pipe); - if (ret) - goto cleanup_objs; - work->pending_flip_obj = obj; work->enable_stall_check = true; @@ -7238,7 +7239,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); -cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); @@ -7247,6 +7247,8 @@ cleanup_objs: intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); + drm_vblank_put(dev, intel_crtc->pipe); +free_work: kfree(work); return ret; -- cgit v0.10.2 From f45b55575cedb7efa782e43f1ea74338456d0381 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Fri, 9 Dec 2011 17:16:37 -0800 Subject: drm/i915: enable semaphores on per-device defaults This adds a default setting for semaphores parameter, and enables semaphores by default on IVB. For now, as semaphores interaction with VTd causes random issues on SNB, we do not enable them by default. But they can still be enabled via the semaphores=1 kernel parameter. v2: enables semaphores on SNB when IO remapping is disabled, with base on Keith Packard patch. CC: Daniel Vetter CC: Ben Widawsky CC: Keith Packard CC: Jesse Barnes CC: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862 Reviewed-by: Chris Wilson Reviewed-by: Daniel Vetter Signed-off-by: Eugeni Dodonov Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 47a42eb..a1103fc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -58,10 +58,10 @@ module_param_named(powersave, i915_powersave, int, 0600); MODULE_PARM_DESC(powersave, "Enable powersavings, fbc, downclocking, etc. (default: true)"); -unsigned int i915_semaphores __read_mostly = 0; +int i915_semaphores __read_mostly = -1; module_param_named(semaphores, i915_semaphores, int, 0600); MODULE_PARM_DESC(semaphores, - "Use semaphores for inter-ring sync (default: false)"); + "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))"); int i915_enable_rc6 __read_mostly = -1; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6bcafb5..554bef7 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1002,7 +1002,7 @@ extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc __always_unused; extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; -extern unsigned int i915_semaphores __read_mostly; +extern int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 3693e83..c681dc1 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -32,6 +32,7 @@ #include "i915_drv.h" #include "i915_trace.h" #include "intel_drv.h" +#include struct change_domains { uint32_t invalidate_domains; @@ -746,6 +747,22 @@ i915_gem_execbuffer_flush(struct drm_device *dev, return 0; } +static bool +intel_enable_semaphores(struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen < 6) + return 0; + + if (i915_semaphores >= 0) + return i915_semaphores; + + /* Enable semaphores on SNB when IO remapping is off */ + if (INTEL_INFO(dev)->gen == 6) + return !intel_iommu_enabled; + + return 1; +} + static int i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj, struct intel_ring_buffer *to) @@ -758,7 +775,7 @@ i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj, return 0; /* XXX gpu semaphores are implicated in various hard hangs on SNB */ - if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores) + if (!intel_enable_semaphores(obj->base.dev)) return i915_gem_object_wait_rendering(obj); idx = intel_ring_sync_index(from, to); -- cgit v0.10.2 From 3b5c78a35cf7511c15e09a9b0ffab290a42d9bcf Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Tue, 13 Dec 2011 15:41:00 -0800 Subject: drm/i915/dp: Dither down to 6bpc if it makes the mode fit Some active adaptors (VGA usually) only have two lanes at 2.7GHz. That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc. Fixes Asus UX31 panel being black at startup due to no valid modes since dc22ee6fc18ce0f15424e753e8473c306ece95c1. v2: Rebased to current code, resulting in the fix applying to EDP panels as well. Also changed from spatio-temporal to just spatial dithering on pre-ironlake, to be conssitent (and less visual flicker) Signed-off-by: Adam Jackson Signed-off-by: Eric Anholt Tested-by: Eric Anholt Tested-by: Dirk Hohndel Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b5f87..d809b03 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4670,6 +4670,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) /** * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send * @crtc: CRTC structure + * @mode: requested mode * * A pipe may be connected to one or more outputs. Based on the depth of the * attached framebuffer, choose a good color depth to use on the pipe. @@ -4681,13 +4682,15 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc * Displays may support a restricted set as well, check EDID and clamp as * appropriate. + * DP may want to dither down to 6bpc to fit larger modes * * RETURNS: * Dithering requirement (i.e. false if display bpc and pipe bpc match, * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, - unsigned int *pipe_bpp) + unsigned int *pipe_bpp, + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4758,6 +4761,11 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); + display_bpc = 6; + } + /* * We could just drive the pipe at the highest bpc all the time and * enable dithering as needed, but that costs bandwidth. So choose @@ -5019,6 +5027,16 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } + /* default to 8bpc */ + pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); + if (is_dp) { + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + pipeconf |= PIPECONF_BPP_6 | + PIPECONF_DITHER_EN | + PIPECONF_DITHER_TYPE_SP; + } + } + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); @@ -5480,7 +5498,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp); + dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 294f557..92b041b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -208,13 +208,15 @@ intel_dp_link_clock(uint8_t link_bw) */ static int -intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock) +intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp) { struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int bpp = 24; - if (intel_crtc) + if (check_bpp) + bpp = check_bpp; + else if (intel_crtc) bpp = intel_crtc->bpp; return (pixel_clock * bpp + 9) / 10; @@ -233,6 +235,7 @@ intel_dp_mode_valid(struct drm_connector *connector, struct intel_dp *intel_dp = intel_attached_dp(connector); int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); int max_lanes = intel_dp_max_lane_count(intel_dp); + int max_rate, mode_rate; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) @@ -242,9 +245,17 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - if (intel_dp_link_required(intel_dp, mode->clock) - > intel_dp_max_data_rate(max_link_clock, max_lanes)) - return MODE_CLOCK_HIGH; + mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0); + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + + if (mode_rate > max_rate) { + mode_rate = intel_dp_link_required(intel_dp, + mode->clock, 18); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + else + mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC; + } if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -672,6 +683,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; + int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -689,7 +701,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); - if (intel_dp_link_required(intel_dp, mode->clock) + if (intel_dp_link_required(intel_dp, mode->clock, bpp) <= link_avail) { intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index bd9a604..a1b4343 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -110,6 +110,7 @@ /* drm_display_mode->private_flags */ #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0) #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT) +#define INTEL_MODE_DP_FORCE_6BPC (0x10) static inline void intel_mode_set_pixel_multiplier(struct drm_display_mode *mode, -- cgit v0.10.2 From 142349f541d0bb6bc3e0d4563268105aada42b0b Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 16 Dec 2011 12:32:57 -0500 Subject: btrfs: lower the dirty balance poll interval Tests show that the original large intervals can easily make the dirty limit exceeded on 100 concurrent dd's. So adapt to as large as the next check point selected by the dirty throttling algorithm. Signed-off-by: Wu Fengguang Signed-off-by: Chris Mason diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index dafdfa0..52305a8 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1167,6 +1167,8 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file, nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE, PAGE_CACHE_SIZE / (sizeof(struct page *))); + nrptrs = min(nrptrs, current->nr_dirtied_pause - current->nr_dirtied); + nrptrs = max(nrptrs, 8); pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL); if (!pages) return -ENOMEM; -- cgit v0.10.2 From ed4a51842a9d9e618d4f4c31349b15b974dba5df Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 16 Dec 2011 12:58:39 -0800 Subject: Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a" This reverts commit eb1711bb94991e93669c5a1b5f84f11be2d51ea1. It blows up the i915 seqno tracking, resulting in the BUG_ON(seqno == 0); in i915_wait_request() triggering, which will cause lock-ups. See for example https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010 https://lkml.org/lkml/2011/12/14/395 Reported-requested-and-tested-by: Dirk Hohndel Reported-by: Richard Eames Reported-by: Rocko Requin Acked-by: Daniel Vetter Cc: Dave Airlie Cc: Chris Wilson Cc: Keith Packard Cc: Eric Anholt Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 60ff1b6..8359dc7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2026,13 +2026,8 @@ i915_wait_request(struct intel_ring_buffer *ring, * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. - * - * To avoid a recursion with the ilk VT-d workaround (that calls - * gpu_idle when unbinding objects with interruptible==false) don't - * retire requests in that case (because it might call unbind if the - * active list holds the last reference to the object). */ - if (ret == 0 && dev_priv->mm.interruptible) + if (ret == 0) i915_gem_retire_requests_ring(ring); return ret; -- cgit v0.10.2 From 384703b8e6cd4c8ef08512e596024e028c91c339 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 16 Dec 2011 18:36:26 -0800 Subject: Linux 3.2-rc6 diff --git a/Makefile b/Makefile index d1ea73f..a43733d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2