From ea5d023615948e85517ac81a7fae79429109cfa2 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sun, 23 May 2010 21:48:24 +0200 Subject: n_gsm.c: removed duplicated #includes drivers/char/n_gsm.c: linux/timer.h is included more than once. Signed-off-by: Andrea Gelmini Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c index e4089c4..099105e 100644 --- a/drivers/char/n_gsm.c +++ b/drivers/char/n_gsm.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 690b781b327a1c986c33fb2c51dd966c38222943 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Wed, 26 May 2010 15:33:43 +0200 Subject: serial: There's no config CONSOLE as there's no config CONSOLE (never has been as far as I can tell) and noone has ever missed that piece of code, it should be safe to remove it making the kernel a tiny bit less complex. Signed-off-by: Christoph Egger Acked-by: Greg Ungerer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 3046386..9330edb 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0; #define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ -#ifdef CONFIG_CONSOLE -extern wait_queue_head_t keypress_wait; -#endif - struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ @@ -300,10 +296,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx) return; #endif /* CONFIG_MAGIC_SYSRQ */ } - /* It is a 'keyboard interrupt' ;-) */ -#ifdef CONFIG_CONSOLE - wake_up(&keypress_wait); -#endif } if(!tty) -- cgit v0.10.2 From 74c807ce3d1f092fc5138c5a54019553061ecc17 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 15 Jun 2010 17:24:16 +0300 Subject: vt: clean up the code - use kernel library Signed-off-by: Andy Shevchenko Cc: Andrew Morton Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 44f03dd..34bfb05 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -105,6 +105,7 @@ #include #include #include +#include #define MAX_NR_CON_DRIVER 16 @@ -1796,8 +1797,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_state = ESnormal; return; case ESpalette: - if ( (c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) { - vc->vc_par[vc->vc_npar++] = (c > '9' ? (c & 0xDF) - 'A' + 10 : c - '0'); + if (isxdigit(c)) { + vc->vc_par[vc->vc_npar++] = hex_to_bin(c); if (vc->vc_npar == 7) { int i = vc->vc_par[0] * 3, j = 1; vc->vc_palette[i] = 16 * vc->vc_par[j++]; -- cgit v0.10.2 From 7a56aa45982bb87bfca98a2832b5ae782c03364a Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Wed, 16 Jun 2010 16:29:55 +0200 Subject: serial: add UART_CAP_EFR and UART_CAP_SLEEP flags to 16C950 UARTs definition Adding UART_CAP_EFR and UART_CAP_SLEEP flags will enable sleep mode and automatic CTS flow control for 16C950 UARTs. It will also avoid capabilities detection warning like this: "ttyS0: detected caps 00000700 should be 00000100" Signed-off-by: Yegor Yefremov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 09ef570..bc8ed4b 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", -- cgit v0.10.2 From 225109957a74c571c49e860fcc4e81fa6df1079d Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 16 Jun 2010 14:46:09 +0100 Subject: mrst_max3110: add UART driver for Max3110 on Moorestown This driver enable the max3110 device, it can be used as a system console. the IRQ needs be enabled if user want a better performance. MRST max3110 works in 3.684MHz clock, which supports 230400 as its maximum rate. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e437ce8..964634e 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -690,6 +690,23 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_MRST_MAX3110 + tristate "SPI UART driver for Max3110" + depends on SPI_DW_PCI + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + This is the UART protocol driver for the MAX3110 device on + the Intel Moorestown platform. On other systems use the max3100 + driver. + +config MRST_MAX3110_IRQ + boolean "Enable GPIO IRQ for Max3110 over Moorestown" + default n + depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL + help + This has to be enabled after Moorestown GPIO driver is loaded + config SERIAL_BFIN tristate "Blackfin serial port support" depends on BLACKFIN diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 208a855..a5edb49 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -84,3 +84,4 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c new file mode 100644 index 0000000..273e7cb --- /dev/null +++ b/drivers/serial/mrst_max3110.c @@ -0,0 +1,844 @@ +/* + * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown + * + * Copyright (C) Intel 2008 Feng Tang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/* + * Note: + * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has + * 1 word. If SPI master controller doesn't support sclk frequency change, + * then the char need be sent out one by one with some delay + * + * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE + * interrupt for a low speed UART device + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "mrst_max3110.h" + +#define PR_FMT "mrst_max3110: " + +struct uart_max3110 { + struct uart_port port; + struct spi_device *spi; + char *name; + + wait_queue_head_t wq; + struct task_struct *main_thread; + struct task_struct *read_thread; + int mthread_up; + spinlock_t lock; + + u32 baud; + u16 cur_conf; + u8 clock; + u8 parity, word_7bits; + + atomic_t uart_tx_need; + + /* console related */ + struct circ_buf con_xmit; + atomic_t con_tx_need; + + /* irq related */ + u16 irq; + atomic_t irq_pending; +}; + +/* global data structure, may need be removed */ +struct uart_max3110 *pmax; +static inline void receive_char(struct uart_max3110 *max, u8 ch); +static void receive_chars(struct uart_max3110 *max, + unsigned char *str, int len); +static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf); +static void max3110_console_receive(struct uart_max3110 *max); + +int max3110_write_then_read(struct uart_max3110 *max, + const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast) +{ + struct spi_device *spi = max->spi; + struct spi_message message; + struct spi_transfer x; + int ret; + + if (!txbuf || !rxbuf) + return -EINVAL; + + spi_message_init(&message); + memset(&x, 0, sizeof x); + x.len = len; + x.tx_buf = txbuf; + x.rx_buf = rxbuf; + spi_message_add_tail(&x, &message); + + if (always_fast) + x.speed_hz = 3125000; + else if (max->baud) + x.speed_hz = max->baud; + + /* Do the i/o */ + ret = spi_sync(spi, &message); + return ret; +} + +/* Write a u16 to the device, and return one u16 read back */ +int max3110_out(struct uart_max3110 *max, const u16 out) +{ + u16 tmp; + int ret; + + ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1); + if (ret) + return ret; + + /* If some valid data is read back */ + if (tmp & MAX3110_READ_DATA_AVAILABLE) + receive_char(max, (tmp & 0xff)); + + return ret; +} + +#define MAX_READ_LEN 20 +/* + * This is usually used to read data from SPIC RX FIFO, which doesn't + * need any delay like flushing character out. It returns how many + * valide bytes are read back + */ +static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf) +{ + u16 out[MAX_READ_LEN], in[MAX_READ_LEN]; + u8 *pbuf, valid_str[MAX_READ_LEN]; + int i, j, bytelen; + + if (len > MAX_READ_LEN) { + pr_err(PR_FMT "read len %d is too large\n", len); + return 0; + } + + bytelen = len * 2; + memset(out, 0, bytelen); + memset(in, 0, bytelen); + + if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1)) + return 0; + + /* If caller don't provide a buffer, then handle received char */ + pbuf = buf ? buf : valid_str; + + for (i = 0, j = 0; i < len; i++) { + if (in[i] & MAX3110_READ_DATA_AVAILABLE) + pbuf[j++] = (u8)(in[i] & 0xff); + } + + if (j && (pbuf == valid_str)) + receive_chars(max, valid_str, j); + + return j; +} + +static void serial_m3110_con_putchar(struct uart_port *port, int ch) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + struct circ_buf *xmit = &max->con_xmit; + + if (uart_circ_chars_free(xmit)) { + xmit->buf[xmit->head] = (char)ch; + xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); + } + + if (!atomic_read(&max->con_tx_need)) { + atomic_set(&max->con_tx_need, 1); + wake_up_process(max->main_thread); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void serial_m3110_con_write(struct console *co, + const char *s, unsigned int count) +{ + if (!pmax) + return; + + uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); +} + +static int __init +serial_m3110_con_setup(struct console *co, char *options) +{ + struct uart_max3110 *max = pmax; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_info(PR_FMT "setting up console\n"); + + if (!max) { + pr_err(PR_FMT "pmax is NULL, return"); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&max->port, co, baud, parity, bits, flow); +} + +static struct tty_driver *serial_m3110_con_device(struct console *co, + int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +static struct uart_driver serial_m3110_reg; +static struct console serial_m3110_console = { + .name = "ttyS", + .write = serial_m3110_con_write, + .device = serial_m3110_con_device, + .setup = serial_m3110_con_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_m3110_reg, +}; + +#define MRST_CONSOLE (&serial_m3110_console) + +static unsigned int serial_m3110_tx_empty(struct uart_port *port) +{ + return 1; +} + +static void serial_m3110_stop_tx(struct uart_port *port) +{ + return; +} + +/* stop_rx will be called in spin_lock env */ +static void serial_m3110_stop_rx(struct uart_port *port) +{ + return; +} + +#define WORDS_PER_XFER 128 +static inline void send_circ_buf(struct uart_max3110 *max, + struct circ_buf *xmit) +{ + int len, left = 0; + u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER]; + u8 valid_str[WORDS_PER_XFER]; + int i, j; + + while (!uart_circ_empty(xmit)) { + left = uart_circ_chars_pending(xmit); + while (left) { + len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left; + + memset(obuf, 0, len * 2); + memset(ibuf, 0, len * 2); + for (i = 0; i < len; i++) { + obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + } + max3110_write_then_read(max, (u8 *)obuf, + (u8 *)ibuf, len * 2, 0); + + for (i = 0, j = 0; i < len; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + valid_str[j++] = (u8)(ibuf[i] & 0xff); + } + + if (j) + receive_chars(max, valid_str, j); + + max->port.icount.tx += len; + left -= len; + } + } +} + +static void transmit_char(struct uart_max3110 *max) +{ + struct uart_port *port = &max->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + send_circ_buf(max, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial_m3110_stop_tx(port); +} + +/* This will be called by uart_write() and tty_write, can't + * go to sleep */ +static void serial_m3110_start_tx(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + + if (!atomic_read(&max->uart_tx_need)) { + atomic_set(&max->uart_tx_need, 1); + wake_up_process(max->main_thread); + } +} + +static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) +{ + struct uart_port *port = &max->port; + struct tty_struct *tty; + int usable; + + /* If uart is not opened, just return */ + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; /* receive some char before the tty is opened */ + + while (len) { + usable = tty_buffer_request_room(tty, len); + if (usable) { + tty_insert_flip_string(tty, str, usable); + str += usable; + port->icount.rx += usable; + tty_flip_buffer_push(tty); + } + len -= usable; + } +} + +static inline void receive_char(struct uart_max3110 *max, u8 ch) +{ + receive_chars(max, &ch, 1); +} + +static void max3110_console_receive(struct uart_max3110 *max) +{ + int loop = 1, num, total = 0; + u8 recv_buf[512], *pbuf; + + pbuf = recv_buf; + do { + num = max3110_read_multi(max, 8, pbuf); + + if (num) { + loop = 10; + pbuf += num; + total += num; + + if (total >= 500) { + receive_chars(max, recv_buf, total); + pbuf = recv_buf; + total = 0; + } + } + } while (--loop); + + if (total) + receive_chars(max, recv_buf, total); +} + +static int max3110_main_thread(void *_max) +{ + struct uart_max3110 *max = _max; + wait_queue_head_t *wq = &max->wq; + int ret = 0; + struct circ_buf *xmit = &max->con_xmit; + + init_waitqueue_head(wq); + pr_info(PR_FMT "start main thread\n"); + + do { + wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) || + atomic_read(&max->con_tx_need) || + atomic_read(&max->uart_tx_need)) || + kthread_should_stop()); + max->mthread_up = 1; + +#ifdef CONFIG_MRST_MAX3110_IRQ + if (atomic_read(&max->irq_pending)) { + max3110_console_receive(max); + atomic_set(&max->irq_pending, 0); + } +#endif + + /* first handle console output */ + if (atomic_read(&max->con_tx_need)) { + send_circ_buf(max, xmit); + atomic_set(&max->con_tx_need, 0); + } + + /* handle uart output */ + if (atomic_read(&max->uart_tx_need)) { + transmit_char(max); + atomic_set(&max->uart_tx_need, 0); + } + max->mthread_up = 0; + } while (!kthread_should_stop()); + + return ret; +} + +#ifdef CONFIG_MRST_MAX3110_IRQ +static irqreturn_t serial_m3110_irq(int irq, void *dev_id) +{ + struct uart_max3110 *max = dev_id; + + /* max3110's irq is a falling edge, not level triggered, + * so no need to disable the irq */ + if (!atomic_read(&max->irq_pending)) { + atomic_inc(&max->irq_pending); + wake_up_process(max->main_thread); + } + return IRQ_HANDLED; +} +#else +/* if don't use RX IRQ, then need a thread to polling read */ +static int max3110_read_thread(void *_max) +{ + struct uart_max3110 *max = _max; + + pr_info(PR_FMT "start read thread\n"); + do { + if (!max->mthread_up) + max3110_console_receive(max); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ / 20); + } while (!kthread_should_stop()); + + return 0; +} +#endif + +static int serial_m3110_startup(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config = 0; + int ret = 0; + + if (port->line != 0) + pr_err(PR_FMT "uart port startup failed\n"); + + /* firstly disable all IRQ and config it to 115200, 8n1 */ + config = WC_TAG | WC_FIFO_ENABLE + | WC_1_STOPBITS + | WC_8BIT_WORD + | WC_BAUD_DR2; + ret = max3110_out(max, config); + + /* as we use thread to handle tx/rx, need set low latency */ + port->state->port.tty->low_latency = 1; + +#ifdef CONFIG_MRST_MAX3110_IRQ + ret = request_irq(max->irq, serial_m3110_irq, + IRQ_TYPE_EDGE_FALLING, "max3110", max); + if (ret) + return ret; + + /* enable RX IRQ only */ + config |= WC_RXA_IRQ_ENABLE; + max3110_out(max, config); +#else + /* if IRQ is disabled, start a read thread for input data */ + max->read_thread = + kthread_run(max3110_read_thread, max, "max3110_read"); +#endif + + max->cur_conf = config; + return 0; +} + +static void serial_m3110_shutdown(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config; + + if (max->read_thread) { + kthread_stop(max->read_thread); + max->read_thread = NULL; + } + +#ifdef CONFIG_MRST_MAX3110_IRQ + free_irq(max->irq, max); +#endif + + /* Disable interrupts from this port */ + config = WC_TAG | WC_SW_SHDI; + max3110_out(max, config); +} + +static void serial_m3110_release_port(struct uart_port *port) +{ +} + +static int serial_m3110_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_m3110_config_port(struct uart_port *port, int flags) +{ + /* give it fake type */ + port->type = PORT_PXA; +} + +static int +serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + + +static const char *serial_m3110_type(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + return max->name; +} + +static void +serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + unsigned char cval; + unsigned int baud, parity = 0; + int clk_div = -1; + u16 new_conf = max->cur_conf; + + switch (termios->c_cflag & CSIZE) { + case CS7: + cval = UART_LCR_WLEN7; + new_conf |= WC_7BIT_WORD; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + new_conf |= WC_8BIT_WORD; + break; + } + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); + + /* first calc the div for 1.8MHZ clock case */ + switch (baud) { + case 300: + clk_div = WC_BAUD_DR384; + break; + case 600: + clk_div = WC_BAUD_DR192; + break; + case 1200: + clk_div = WC_BAUD_DR96; + break; + case 2400: + clk_div = WC_BAUD_DR48; + break; + case 4800: + clk_div = WC_BAUD_DR24; + break; + case 9600: + clk_div = WC_BAUD_DR12; + break; + case 19200: + clk_div = WC_BAUD_DR6; + break; + case 38400: + clk_div = WC_BAUD_DR3; + break; + case 57600: + clk_div = WC_BAUD_DR2; + break; + case 115200: + clk_div = WC_BAUD_DR1; + break; + case 230400: + if (max->clock & MAX3110_HIGH_CLK) + break; + default: + /* pick the previous baud rate */ + baud = max->baud; + clk_div = max->cur_conf & WC_BAUD_DIV_MASK; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + if (max->clock & MAX3110_HIGH_CLK) { + clk_div += 1; + /* high clk version max3110 doesn't support B300 */ + if (baud == 300) + baud = 600; + if (baud == 230400) + clk_div = WC_BAUD_DR1; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; + if (termios->c_cflag & CSTOPB) + new_conf |= WC_2_STOPBITS; + else + new_conf &= ~WC_2_STOPBITS; + + if (termios->c_cflag & PARENB) { + new_conf |= WC_PARITY_ENABLE; + parity |= UART_LCR_PARITY; + } else + new_conf &= ~WC_PARITY_ENABLE; + + if (!(termios->c_cflag & PARODD)) + parity |= UART_LCR_EPAR; + max->parity = parity; + + uart_update_timeout(port, termios->c_cflag, baud); + + new_conf |= WC_TAG; + if (new_conf != max->cur_conf) { + max3110_out(max, new_conf); + max->cur_conf = new_conf; + max->baud = baud; + } +} + +/* don't handle hw handshaking */ +static unsigned int serial_m3110_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; +} + +static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial_m3110_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void serial_m3110_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_m3110_enable_ms(struct uart_port *port) +{ +} + +struct uart_ops serial_m3110_ops = { + .tx_empty = serial_m3110_tx_empty, + .set_mctrl = serial_m3110_set_mctrl, + .get_mctrl = serial_m3110_get_mctrl, + .stop_tx = serial_m3110_stop_tx, + .start_tx = serial_m3110_start_tx, + .stop_rx = serial_m3110_stop_rx, + .enable_ms = serial_m3110_enable_ms, + .break_ctl = serial_m3110_break_ctl, + .startup = serial_m3110_startup, + .shutdown = serial_m3110_shutdown, + .set_termios = serial_m3110_set_termios, /* must have */ + .pm = serial_m3110_pm, + .type = serial_m3110_type, + .release_port = serial_m3110_release_port, + .request_port = serial_m3110_request_port, + .config_port = serial_m3110_config_port, + .verify_port = serial_m3110_verify_port, +}; + +static struct uart_driver serial_m3110_reg = { + .owner = THIS_MODULE, + .driver_name = "MRST serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 1, + .cons = MRST_CONSOLE, +}; + +static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) +{ + return 0; +} + +static int serial_m3110_resume(struct spi_device *spi) +{ + return 0; +} + +static struct dw_spi_chip spi0_uart = { + .poll_mode = 1, + .enable_dma = 0, + .type = SPI_FRF_SPI, +}; + +static int serial_m3110_probe(struct spi_device *spi) +{ + struct uart_max3110 *max; + int ret; + unsigned char *buffer; + + max = kzalloc(sizeof(*max), GFP_KERNEL); + if (!max) + return -ENOMEM; + + /* set spi info */ + spi->mode = SPI_MODE_0; + spi->bits_per_word = 16; + max->clock = MAX3110_HIGH_CLK; + spi->controller_data = &spi0_uart; + + spi_setup(spi); + + max->port.type = PORT_PXA; /* need apply for a max3110 type */ + max->port.fifosize = 2; /* only have 16b buffer */ + max->port.ops = &serial_m3110_ops; + max->port.line = 0; + max->port.dev = &spi->dev; + max->port.uartclk = 115200; + + max->spi = spi; + max->name = spi->modalias; /* use spi name as the name */ + max->irq = (u16)spi->irq; + + spin_lock_init(&max->lock); + + max->word_7bits = 0; + max->parity = 0; + max->baud = 0; + + max->cur_conf = 0; + atomic_set(&max->irq_pending, 0); + + buffer = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err_get_page; + } + max->con_xmit.buf = (unsigned char *)buffer; + max->con_xmit.head = max->con_xmit.tail = 0; + + max->main_thread = kthread_run(max3110_main_thread, + max, "max3110_main"); + if (IS_ERR(max->main_thread)) { + ret = PTR_ERR(max->main_thread); + goto err_kthread; + } + + pmax = max; + /* give membase a psudo value to pass serial_core's check */ + max->port.membase = (void *)0xff110000; + uart_add_one_port(&serial_m3110_reg, &max->port); + + return 0; + +err_kthread: + free_page((unsigned long)buffer); +err_get_page: + pmax = NULL; + kfree(max); + return ret; +} + +static int max3110_remove(struct spi_device *dev) +{ + struct uart_max3110 *max = pmax; + + if (!pmax) + return 0; + + pmax = NULL; + uart_remove_one_port(&serial_m3110_reg, &max->port); + + free_page((unsigned long)max->con_xmit.buf); + + if (max->main_thread) + kthread_stop(max->main_thread); + + kfree(max); + return 0; +} + +static struct spi_driver uart_max3110_driver = { + .driver = { + .name = "spi_max3111", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = serial_m3110_probe, + .remove = __devexit_p(max3110_remove), + .suspend = serial_m3110_suspend, + .resume = serial_m3110_resume, +}; + + +int __init serial_m3110_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&serial_m3110_reg); + if (ret) + return ret; + + ret = spi_register_driver(&uart_max3110_driver); + if (ret) + uart_unregister_driver(&serial_m3110_reg); + + return ret; +} + +void __exit serial_m3110_exit(void) +{ + spi_unregister_driver(&uart_max3110_driver); + uart_unregister_driver(&serial_m3110_reg); +} + +module_init(serial_m3110_init); +module_exit(serial_m3110_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("max3110-uart"); diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h new file mode 100644 index 0000000..363478a --- /dev/null +++ b/drivers/serial/mrst_max3110.h @@ -0,0 +1,59 @@ +#ifndef _MRST_MAX3110_H +#define _MRST_MAX3110_H + +#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ +#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ + +/* status bits for all 4 MAX3110 operate modes */ +#define MAX3110_READ_DATA_AVAILABLE (1 << 15) +#define MAX3110_WRITE_BUF_EMPTY (1 << 14) + +#define WC_TAG (3 << 14) +#define RC_TAG (1 << 14) +#define WD_TAG (2 << 14) +#define RD_TAG (0 << 14) + +/* bits def for write configuration */ +#define WC_FIFO_ENABLE_MASK (1 << 13) +#define WC_FIFO_ENABLE (0 << 13) + +#define WC_SW_SHDI (1 << 12) + +#define WC_IRQ_MASK (0xF << 8) +#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ +#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ +#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) +#define WC_REC_ACT_IRQ_ENABLE (1 << 8) + +#define WC_IRDA_ENABLE (1 << 7) + +#define WC_STOPBITS_MASK (1 << 6) +#define WC_2_STOPBITS (1 << 6) +#define WC_1_STOPBITS (0 << 6) + +#define WC_PARITY_ENABLE_MASK (1 << 5) +#define WC_PARITY_ENABLE (1 << 5) + +#define WC_WORDLEN_MASK (1 << 4) +#define WC_7BIT_WORD (1 << 4) +#define WC_8BIT_WORD (0 << 4) + +#define WC_BAUD_DIV_MASK (0xF) +#define WC_BAUD_DR1 (0x0) +#define WC_BAUD_DR2 (0x1) +#define WC_BAUD_DR4 (0x2) +#define WC_BAUD_DR8 (0x3) +#define WC_BAUD_DR16 (0x4) +#define WC_BAUD_DR32 (0x5) +#define WC_BAUD_DR64 (0x6) +#define WC_BAUD_DR128 (0x7) +#define WC_BAUD_DR3 (0x8) +#define WC_BAUD_DR6 (0x9) +#define WC_BAUD_DR12 (0xA) +#define WC_BAUD_DR24 (0xB) +#define WC_BAUD_DR48 (0xC) +#define WC_BAUD_DR96 (0xD) +#define WC_BAUD_DR192 (0xE) +#define WC_BAUD_DR384 (0xF) + +#endif -- cgit v0.10.2 From 99dd3f6b7e2ef5179f67503a401a99141708687a Mon Sep 17 00:00:00 2001 From: "jianwei.yang" Date: Wed, 16 Jun 2010 14:46:49 +0100 Subject: max3110 sanity check a register MAX3111 is the SPI/UART IC installed on the MRST SPI Port Card as a serial debug goal, and the SPI Port Card will be frequently mounted and unmounted from the main board by developers depending whether debug serial is required or not. As the MAX3111 has no subvendor or product id registers available, the patch will try to access one register to decide if this IC is present or not. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c index 273e7cb..f9c01ae 100644 --- a/drivers/serial/mrst_max3110.c +++ b/drivers/serial/mrst_max3110.c @@ -721,7 +721,7 @@ static int serial_m3110_probe(struct spi_device *spi) struct uart_max3110 *max; int ret; unsigned char *buffer; - + u16 res; max = kzalloc(sizeof(*max), GFP_KERNEL); if (!max) return -ENOMEM; @@ -753,7 +753,16 @@ static int serial_m3110_probe(struct spi_device *spi) max->cur_conf = 0; atomic_set(&max->irq_pending, 0); - + /* Check if reading configuration register returns something sane */ + + res = RC_TAG; + ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); + if (ret < 0 || res == 0 || res == 0xffff) { + printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + res); + ret = -ENODEV; + goto err_get_page; + } buffer = (unsigned char *)__get_free_page(GFP_KERNEL); if (!buffer) { ret = -ENOMEM; -- cgit v0.10.2 From 68c16b4117cc746a91897d629b61e5f2af18c225 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 17 Jun 2010 11:02:06 +0100 Subject: serial: replace open coded mutex with a real mutex in mrst_max3110.c The mrst_max3110.c driver uses an open coded, non atomic variable to create exclusion between two of its worker threads. More than that, while the main thread does a proper set-work-clear sequence, the other thread only does a test, with the result that no actual exclusion is happening. this patch replaces this open coded variable with a proper mutex in addition, the 'lock' spinlock is removed from the per adapter structure, the lock was only ever initialized but never used Signed-off-by: Arjan van de Ven Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c index f9c01ae..0341853 100644 --- a/drivers/serial/mrst_max3110.c +++ b/drivers/serial/mrst_max3110.c @@ -56,8 +56,7 @@ struct uart_max3110 { wait_queue_head_t wq; struct task_struct *main_thread; struct task_struct *read_thread; - int mthread_up; - spinlock_t lock; + struct mutex thread_mutex;; u32 baud; u16 cur_conf; @@ -397,7 +396,8 @@ static int max3110_main_thread(void *_max) atomic_read(&max->con_tx_need) || atomic_read(&max->uart_tx_need)) || kthread_should_stop()); - max->mthread_up = 1; + + mutex_lock(&max->thread_mutex); #ifdef CONFIG_MRST_MAX3110_IRQ if (atomic_read(&max->irq_pending)) { @@ -417,7 +417,7 @@ static int max3110_main_thread(void *_max) transmit_char(max); atomic_set(&max->uart_tx_need, 0); } - max->mthread_up = 0; + mutex_unlock(&max->thread_mutex); } while (!kthread_should_stop()); return ret; @@ -444,8 +444,9 @@ static int max3110_read_thread(void *_max) pr_info(PR_FMT "start read thread\n"); do { - if (!max->mthread_up) - max3110_console_receive(max); + mutex_lock(&max->thread_mutex); + max3110_console_receive(max); + mutex_unlock(&max->thread_mutex); set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ / 20); @@ -745,7 +746,7 @@ static int serial_m3110_probe(struct spi_device *spi) max->name = spi->modalias; /* use spi name as the name */ max->irq = (u16)spi->irq; - spin_lock_init(&max->lock); + mutex_init(&max->thread_mutex); max->word_7bits = 0; max->parity = 0; -- cgit v0.10.2 From d6e679b474c096f1125087e789e7af8886de39d3 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 17 Jun 2010 11:02:15 +0100 Subject: serial: fix wakup races in the mrst_max3110 driver The mrst_max3110 driver had a set of unsafe wakeup sequences along the following line: if (!atomic_read(&foo)) { atomic_set(&foo, 1); wake_up(worker_thread); } and the worker thread would do if (atomic_read(&foo)) { do_work(); atomic_set(&foo, 0); } which can result in various missed wakups due to test-then-set races, as well as due to clear-after-work instead of clear-before-work. This patch fixes these races by using the proper bit test-and-set operations, and by doing clear-before-work. Signed-off-by: Arjan van de Ven Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c index 0341853..f6ad1ec 100644 --- a/drivers/serial/mrst_max3110.c +++ b/drivers/serial/mrst_max3110.c @@ -48,6 +48,10 @@ #define PR_FMT "mrst_max3110: " +#define UART_TX_NEEDED 1 +#define CON_TX_NEEDED 2 +#define BIT_IRQ_PENDING 3 + struct uart_max3110 { struct uart_port port; struct spi_device *spi; @@ -63,15 +67,13 @@ struct uart_max3110 { u8 clock; u8 parity, word_7bits; - atomic_t uart_tx_need; + unsigned long uart_flags; /* console related */ struct circ_buf con_xmit; - atomic_t con_tx_need; /* irq related */ u16 irq; - atomic_t irq_pending; }; /* global data structure, may need be removed */ @@ -176,10 +178,9 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch) xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); } - if (!atomic_read(&max->con_tx_need)) { - atomic_set(&max->con_tx_need, 1); + + if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags)) wake_up_process(max->main_thread); - } } /* @@ -318,10 +319,8 @@ static void serial_m3110_start_tx(struct uart_port *port) struct uart_max3110 *max = container_of(port, struct uart_max3110, port); - if (!atomic_read(&max->uart_tx_need)) { - atomic_set(&max->uart_tx_need, 1); + if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) wake_up_process(max->main_thread); - } } static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) @@ -392,32 +391,23 @@ static int max3110_main_thread(void *_max) pr_info(PR_FMT "start main thread\n"); do { - wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) || - atomic_read(&max->con_tx_need) || - atomic_read(&max->uart_tx_need)) || - kthread_should_stop()); + wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); mutex_lock(&max->thread_mutex); -#ifdef CONFIG_MRST_MAX3110_IRQ - if (atomic_read(&max->irq_pending)) { + if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) max3110_console_receive(max); - atomic_set(&max->irq_pending, 0); - } -#endif /* first handle console output */ - if (atomic_read(&max->con_tx_need)) { + if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) send_circ_buf(max, xmit); - atomic_set(&max->con_tx_need, 0); - } /* handle uart output */ - if (atomic_read(&max->uart_tx_need)) { + if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) transmit_char(max); - atomic_set(&max->uart_tx_need, 0); - } + mutex_unlock(&max->thread_mutex); + } while (!kthread_should_stop()); return ret; @@ -430,10 +420,9 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id) /* max3110's irq is a falling edge, not level triggered, * so no need to disable the irq */ - if (!atomic_read(&max->irq_pending)) { - atomic_inc(&max->irq_pending); + if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) wake_up_process(max->main_thread); - } + return IRQ_HANDLED; } #else @@ -753,7 +742,8 @@ static int serial_m3110_probe(struct spi_device *spi) max->baud = 0; max->cur_conf = 0; - atomic_set(&max->irq_pending, 0); + max->uart_flags = 0; + /* Check if reading configuration register returns something sane */ res = RC_TAG; -- cgit v0.10.2 From 39e5322c074f895b5b5c657a312c56b6c6154a38 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 17 Jun 2010 15:15:16 -0400 Subject: tty: Remove Hayes ESP ioctls Remove Hayes ESP ioctls The Hayes ESP driver has been removed from the tree: commit f53a2ade0bb9f2a81f473e6469155172a96b7c38 ("tty: esp: remove broken driver") so its ioctls aren't needed any more. Signed-off-by: Jeff Dike Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h index a799e20..1375fa1 100644 --- a/include/asm-generic/ioctls.h +++ b/include/asm-generic/ioctls.h @@ -87,12 +87,10 @@ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ /* - * some architectures define FIOQSIZE as 0x545E, which is used for - * TIOCGHAYESESP on others + * Some arches already define FIOQSIZE due to a historical + * conflict with a Hayes modem-specific ioctl value. */ #ifndef FIOQSIZE -# define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -# define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ # define FIOQSIZE 0x5460 #endif -- cgit v0.10.2 From a3c8ed693da9782f924223f65da9261da796e49b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Jun 2010 13:16:08 -0700 Subject: tty: remove remaining Hayes ESP ioctls As Jeff Dike pointed out, the Hayes ESP driver was removed in commit f53a2ade0bb9f2a81f473e6469155172a96b7c38, so these ioctl definitions should also be removed. This cleans up the remaining arch-specific locations of this ioctl value. Thanks to Arnd for pointing these out. Cc: Jeff Dike Cc: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h index 67bb9f6..c7b0cc6 100644 --- a/arch/alpha/include/asm/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h @@ -106,7 +106,5 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #endif /* _ASM_ALPHA_IOCTLS_H */ diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h index e6ac0b6..143dafb 100644 --- a/arch/avr32/include/asm/ioctls.h +++ b/arch/avr32/include/asm/ioctls.h @@ -72,8 +72,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 /* Used for packet mode */ diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h index 076c078..bb49142 100644 --- a/arch/cris/include/asm/ioctls.h +++ b/arch/cris/include/asm/ioctls.h @@ -70,8 +70,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 #define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */ diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h index f41b636..f0ee86c 100644 --- a/arch/ia64/include/asm/ioctls.h +++ b/arch/ia64/include/asm/ioctls.h @@ -75,8 +75,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 /* Used for packet mode */ diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h index b9f54bb..f4c13a5 100644 --- a/arch/m32r/include/asm/ioctls.h +++ b/arch/m32r/include/asm/ioctls.h @@ -69,8 +69,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 /* Used for packet mode */ diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h index 3f04a99..2fb9e16 100644 --- a/arch/mips/include/asm/ioctls.h +++ b/arch/mips/include/asm/ioctls.h @@ -103,7 +103,5 @@ #define TIOCSERSETMULTI 0x5490 /* Set multiport config */ #define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */ #endif /* __ASM_IOCTLS_H */ diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h index dcbfb45..638219a 100644 --- a/arch/mn10300/include/asm/ioctls.h +++ b/arch/mn10300/include/asm/ioctls.h @@ -70,8 +70,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 /* Used for packet mode */ diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h index 6747fad..6cc497e 100644 --- a/arch/parisc/include/asm/ioctls.h +++ b/arch/parisc/include/asm/ioctls.h @@ -68,8 +68,6 @@ #define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 /* Get exact space used by quota */ #define TIOCSTART 0x5461 -- cgit v0.10.2 From 26df6d13406d1a53b0bda08bd712f1924affd7cd Mon Sep 17 00:00:00 2001 From: "hyc@symas.com" Date: Tue, 22 Jun 2010 10:14:49 -0700 Subject: tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h index c7b0cc6..59617c3 100644 --- a/arch/alpha/include/asm/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h @@ -80,6 +80,7 @@ # define TIOCPKT_START 8 # define TIOCPKT_NOSTOP 16 # define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 #define TIOCNOTTY 0x5422 @@ -91,6 +92,7 @@ #define TIOCGSID 0x5429 /* Return the session ID of FD */ #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h index ad854a4..879dd35 100644 --- a/arch/alpha/include/asm/termbits.h +++ b/arch/alpha/include/asm/termbits.h @@ -180,6 +180,7 @@ struct ktermios { #define FLUSHO 0x00800000 #define PENDIN 0x20000000 #define IEXTEN 0x00000400 +#define EXTPROC 0x10000000 /* Values for the ACTION argument to `tcflow'. */ #define TCOOFF 0 diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h index 7f0b6d1..0b30894 100644 --- a/arch/arm/include/asm/ioctls.h +++ b/arch/arm/include/asm/ioctls.h @@ -52,6 +52,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCGRS485 0x542E #define TIOCSRS485 0x542F @@ -81,6 +82,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h index f784d11..704135d 100644 --- a/arch/arm/include/asm/termbits.h +++ b/arch/arm/include/asm/termbits.h @@ -177,6 +177,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h index 143dafb..b7dd324 100644 --- a/arch/avr32/include/asm/ioctls.h +++ b/arch/avr32/include/asm/ioctls.h @@ -53,6 +53,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCGRS485 0x542E #define TIOCSRS485 0x542F @@ -82,6 +83,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h index db2daab..366adc5 100644 --- a/arch/avr32/include/asm/termbits.h +++ b/arch/avr32/include/asm/termbits.h @@ -175,6 +175,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h index bb49142..c9129ed 100644 --- a/arch/cris/include/asm/ioctls.h +++ b/arch/cris/include/asm/ioctls.h @@ -54,6 +54,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -85,6 +86,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/cris/include/asm/termbits.h b/arch/cris/include/asm/termbits.h index 66e1a74..1c43bc8 100644 --- a/arch/cris/include/asm/termbits.h +++ b/arch/cris/include/asm/termbits.h @@ -214,6 +214,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h index d0c30e3..a993e37 100644 --- a/arch/frv/include/asm/ioctls.h +++ b/arch/frv/include/asm/ioctls.h @@ -53,6 +53,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -79,6 +80,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h index 5568492..7722e19 100644 --- a/arch/frv/include/asm/termbits.h +++ b/arch/frv/include/asm/termbits.h @@ -180,6 +180,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ diff --git a/arch/h8300/include/asm/ioctls.h b/arch/h8300/include/asm/ioctls.h index 98a53d0..b6b249f 100644 --- a/arch/h8300/include/asm/ioctls.h +++ b/arch/h8300/include/asm/ioctls.h @@ -53,6 +53,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -79,6 +80,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/h8300/include/asm/termbits.h b/arch/h8300/include/asm/termbits.h index 31eca81..3287a62 100644 --- a/arch/h8300/include/asm/termbits.h +++ b/arch/h8300/include/asm/termbits.h @@ -179,6 +179,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h index f0ee86c..b79c385 100644 --- a/arch/ia64/include/asm/ioctls.h +++ b/arch/ia64/include/asm/ioctls.h @@ -59,6 +59,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -85,6 +86,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/asm/termbits.h index 9f162e0..c009b94 100644 --- a/arch/ia64/include/asm/termbits.h +++ b/arch/ia64/include/asm/termbits.h @@ -187,6 +187,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h index f4c13a5..6628806 100644 --- a/arch/m32r/include/asm/ioctls.h +++ b/arch/m32r/include/asm/ioctls.h @@ -53,6 +53,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 @@ -79,6 +80,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/m32r/include/asm/termbits.h b/arch/m32r/include/asm/termbits.h index bc10400..957a3c6 100644 --- a/arch/m32r/include/asm/termbits.h +++ b/arch/m32r/include/asm/termbits.h @@ -179,6 +179,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h index b8d2f4b..91a57d6 100644 --- a/arch/m68k/include/asm/ioctls.h +++ b/arch/m68k/include/asm/ioctls.h @@ -52,6 +52,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -78,6 +79,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h index 8c14170..aea1e37 100644 --- a/arch/m68k/include/asm/termbits.h +++ b/arch/m68k/include/asm/termbits.h @@ -179,6 +179,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h index 2fb9e16..d87cb04 100644 --- a/arch/mips/include/asm/ioctls.h +++ b/arch/mips/include/asm/ioctls.h @@ -41,7 +41,7 @@ #define TIOCPKT_START 0x08 /* start output */ #define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */ #define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */ -/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */ +#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */ #define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */ #define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */ #define TIOCNOTTY 0x5471 /* void tty association */ @@ -83,6 +83,7 @@ #define TCSETSF2 _IOW('T', 0x2D, struct termios2) #define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h index c83c684..76630b3 100644 --- a/arch/mips/include/asm/termbits.h +++ b/arch/mips/include/asm/termbits.h @@ -203,6 +203,7 @@ struct ktermios { #define PENDIN 0040000 /* Retype pending input (state). */ #define TOSTOP 0100000 /* Send SIGTTOU for background output. */ #define ITOSTOP TOSTOP +#define EXTPROC 0200000 /* External processing on pty */ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h index 638219a..cb8cf19 100644 --- a/arch/mn10300/include/asm/ioctls.h +++ b/arch/mn10300/include/asm/ioctls.h @@ -54,6 +54,7 @@ #define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number * (of pty-mux device) */ #define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 @@ -80,6 +81,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h index eb2b0dc..130d424 100644 --- a/arch/mn10300/include/asm/termbits.h +++ b/arch/mn10300/include/asm/termbits.h @@ -180,6 +180,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h index 6cc497e..4e06144 100644 --- a/arch/parisc/include/asm/ioctls.h +++ b/arch/parisc/include/asm/ioctls.h @@ -52,6 +52,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -82,6 +83,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/parisc/include/asm/termbits.h b/arch/parisc/include/asm/termbits.h index d8bbc73..d1ab921 100644 --- a/arch/parisc/include/asm/termbits.h +++ b/arch/parisc/include/asm/termbits.h @@ -180,6 +180,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h index 1842186d..8519200 100644 --- a/arch/powerpc/include/asm/ioctls.h +++ b/arch/powerpc/include/asm/ioctls.h @@ -80,6 +80,7 @@ # define TIOCPKT_START 8 # define TIOCPKT_NOSTOP 16 # define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 #define TIOCNOTTY 0x5422 @@ -93,6 +94,7 @@ #define TIOCSRS485 0x542f #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h index 6698188..549d700 100644 --- a/arch/powerpc/include/asm/termbits.h +++ b/arch/powerpc/include/asm/termbits.h @@ -189,6 +189,7 @@ struct ktermios { #define FLUSHO 0x00800000 #define PENDIN 0x20000000 #define IEXTEN 0x00000400 +#define EXTPROC 0x10000000 /* Values for the ACTION argument to `tcflow'. */ #define TCOOFF 0 diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h index 40e481b..2f3d873 100644 --- a/arch/s390/include/asm/ioctls.h +++ b/arch/s390/include/asm/ioctls.h @@ -60,6 +60,7 @@ #define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 @@ -86,6 +87,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h index c212c37..eb6c4c6 100644 --- a/arch/sh/include/asm/ioctls.h +++ b/arch/sh/include/asm/ioctls.h @@ -69,6 +69,7 @@ # define TIOCPKT_START 8 # define TIOCPKT_NOSTOP 16 # define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 #define TIOCNOTTY _IO('T', 34) /* 0x5422 */ @@ -84,6 +85,7 @@ #define TCSETSF2 _IOW('T', 45, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h index 1fe6855..53f4ee0 100644 --- a/arch/sparc/include/asm/ioctls.h +++ b/arch/sparc/include/asm/ioctls.h @@ -80,6 +80,7 @@ /* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */ #define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ #define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ +#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */ /* Little f */ #define FIOCLEX _IO('f', 1) @@ -132,5 +133,6 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #endif /* !(_ASM_SPARC_IOCTLS_H) */ diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h index d72dfed..23b10ff 100644 --- a/arch/sparc/include/asm/termbits.h +++ b/arch/sparc/include/asm/termbits.h @@ -225,6 +225,7 @@ struct ktermios { #define FLUSHO 0x00002000 #define PENDIN 0x00004000 #define IEXTEN 0x00008000 +#define EXTPROC 0x00010000 /* modem lines */ #define TIOCM_LE 0x001 diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h index 0ffa942..ab18000 100644 --- a/arch/xtensa/include/asm/ioctls.h +++ b/arch/xtensa/include/asm/ioctls.h @@ -81,6 +81,7 @@ # define TIOCPKT_START 8 # define TIOCPKT_NOSTOP 16 # define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 #define TIOCNOTTY _IO('T', 34) @@ -97,6 +98,7 @@ #define TCSETSF2 _IOW('T', 45, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) diff --git a/arch/xtensa/include/asm/termbits.h b/arch/xtensa/include/asm/termbits.h index 85aa6a3c..0d6c871 100644 --- a/arch/xtensa/include/asm/termbits.h +++ b/arch/xtensa/include/asm/termbits.h @@ -196,6 +196,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index bdae832..428f4fe 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -1102,6 +1102,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IUCLC(tty) && L_IEXTEN(tty)) c = tolower(c); + if (L_EXTPROC(tty)) { + put_tty_queue(c, tty); + return; + } + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { @@ -1409,7 +1414,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, n_tty_set_room(tty); - if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) { + if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) || + L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); @@ -1585,7 +1591,7 @@ static int n_tty_open(struct tty_struct *tty) static inline int input_available_p(struct tty_struct *tty, int amt) { tty_flush_to_ldisc(tty); - if (tty->icanon) { + if (tty->icanon && !L_EXTPROC(tty)) { if (tty->canon_data) return 1; } else if (tty->read_cnt >= (amt ? amt : 1)) @@ -1632,6 +1638,11 @@ static int copy_from_read_buf(struct tty_struct *tty, spin_lock_irqsave(&tty->read_lock, flags); tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1); tty->read_cnt -= n; + /* Turn single EOF into zero-length read */ + if (L_EXTPROC(tty) && tty->icanon && n == 1) { + if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty)) + n--; + } spin_unlock_irqrestore(&tty->read_lock, flags); *b += n; *nr -= n; @@ -1812,7 +1823,7 @@ do_it_again: nr--; } - if (tty->icanon) { + if (tty->icanon && !L_EXTPROC(tty)) { /* N.B. avoid overrun if nr == 0 */ while (nr && tty->read_cnt) { int eol; diff --git a/drivers/char/pty.c b/drivers/char/pty.c index d83a431..b640ef2 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -171,6 +171,23 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg) return 0; } +/* Send a signal to the slave */ +static int pty_signal(struct tty_struct *tty, int sig) +{ + unsigned long flags; + struct pid *pgrp; + + if (tty->link) { + spin_lock_irqsave(&tty->link->ctrl_lock, flags); + pgrp = get_pid(tty->link->pgrp); + spin_unlock_irqrestore(&tty->link->ctrl_lock, flags); + + kill_pgrp(pgrp, sig, 1); + put_pid(pgrp); + } + return 0; +} + static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; @@ -321,6 +338,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *) arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; } @@ -476,6 +495,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file, return pty_set_lock(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 6bd5f88..0c18899 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -517,19 +517,25 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) /* See if packet mode change of state. */ if (tty->link && tty->link->packet) { + int extproc = (old_termios.c_lflag & EXTPROC) | + (tty->termios->c_lflag & EXTPROC); int old_flow = ((old_termios.c_iflag & IXON) && (old_termios.c_cc[VSTOP] == '\023') && (old_termios.c_cc[VSTART] == '\021')); int new_flow = (I_IXON(tty) && STOP_CHAR(tty) == '\023' && START_CHAR(tty) == '\021'); - if (old_flow != new_flow) { + if ((old_flow != new_flow) || extproc) { spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); - if (new_flow) - tty->ctrl_status |= TIOCPKT_DOSTOP; - else - tty->ctrl_status |= TIOCPKT_NOSTOP; + if (old_flow != new_flow) { + tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); + if (new_flow) + tty->ctrl_status |= TIOCPKT_DOSTOP; + else + tty->ctrl_status |= TIOCPKT_NOSTOP; + } + if (extproc) + tty->ctrl_status |= TIOCPKT_IOCTL; spin_unlock_irqrestore(&tty->ctrl_lock, flags); wake_up_interruptible(&tty->link->read_wait); } diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 63ae858..fa4bc48 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -969,6 +969,7 @@ COMPATIBLE_IOCTL(TIOCGPGRP) COMPATIBLE_IOCTL(TIOCGPTN) COMPATIBLE_IOCTL(TIOCSPTLCK) COMPATIBLE_IOCTL(TIOCSERGETLSR) +COMPATIBLE_IOCTL(TIOCSIG) #ifdef TCGETS2 COMPATIBLE_IOCTL(TCGETS2) COMPATIBLE_IOCTL(TCSETS2) diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h index 1375fa1..8554cb6 100644 --- a/include/asm-generic/ioctls.h +++ b/include/asm-generic/ioctls.h @@ -69,6 +69,7 @@ #define TCSETX 0x5433 #define TCSETXF 0x5434 #define TCSETXW 0x5435 +#define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 @@ -102,6 +103,7 @@ #define TIOCPKT_START 8 #define TIOCPKT_NOSTOP 16 #define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h index 1c9773d..232b478 100644 --- a/include/asm-generic/termbits.h +++ b/include/asm-generic/termbits.h @@ -178,6 +178,7 @@ struct ktermios { #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 +#define EXTPROC 0200000 /* tcflow() and TCXONC use these */ #define TCOOFF 0 diff --git a/include/linux/tty.h b/include/linux/tty.h index 7802a24..2df60e4 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -179,6 +179,7 @@ struct tty_bufhead { #define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO) #define L_PENDIN(tty) _L_FLAG((tty), PENDIN) #define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN) +#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC) struct device; struct signal_struct; -- cgit v0.10.2 From 8fd4bd22350784d5b2fe9274f6790ba353976415 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 23 Jun 2010 12:56:12 -0700 Subject: vt/console: try harder to print output when panicing Jesse's initial patch commit said: "At panic time (i.e. when oops_in_progress is set) we should try a bit harder to update the screen and make sure output gets to the VT, since some drivers are capable of flipping back to it. So make sure we try to unblank and update the display if called from a panic context." I've enhanced this to add a flag to the vc that console layer can set to indicate they want this behaviour to occur. This also adds support to fbcon for that flag and adds an fb flag for drivers to indicate they want to use the support. It enables this for KMS drivers. Signed-off-by: Dave Airlie Signed-off-by: Jesse Barnes Acked-by: James Simmons Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 34bfb05..82f64ac 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -705,7 +705,10 @@ void redraw_screen(struct vc_data *vc, int is_switch) update_attr(vc); clear_buffer_attributes(vc); } - if (update && vc->vc_mode != KD_GRAPHICS) + + /* Forcibly update if we're panicing */ + if ((update && vc->vc_mode != KD_GRAPHICS) || + vt_force_oops_output(vc)) do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2); } set_cursor(vc); @@ -743,6 +746,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_hi_font_mask = 0; vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; + vc->vc_panic_force_write = false; vc->vc_sw->con_init(vc, init); if (!vc->vc_complement_mask) vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; @@ -2506,7 +2510,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) goto quit; } - if (vc->vc_mode != KD_TEXT) + if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc)) goto quit; /* undraw cursor first */ @@ -3784,7 +3788,8 @@ void do_unblank_screen(int leaving_gfx) return; } vc = vc_cons[fg_console].d; - if (vc->vc_mode != KD_TEXT) + /* Try to unblank in oops case too */ + if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc)) return; /* but leave console_blanked != 0 */ if (blankinterval) { @@ -3793,7 +3798,7 @@ void do_unblank_screen(int leaving_gfx) } console_blanked = 0; - if (vc->vc_sw->con_blank(vc, 0, leaving_gfx)) + if (vc->vc_sw->con_blank(vc, 0, leaving_gfx) || vt_force_oops_output(vc)) /* Low-level driver cannot restore -> do it ourselves */ update_screen(vc); if (console_blank_hook) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 54acd8b..a79525f 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -130,7 +130,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev, strcpy(info->fix.id, "inteldrmfb"); - info->flags = FBINFO_DEFAULT; + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; info->fbops = &intelfb_ops; /* setup aperture base/size for vesafb takeover */ @@ -148,8 +148,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev, info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset; info->fix.smem_len = size; - info->flags = FBINFO_DEFAULT; - info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset, size); if (!info->screen_base) { diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 2fb2444..099f637 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -250,6 +250,7 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev, info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT; + info->flags |= FBINFO_CAN_FORCE_OUTPUT; info->fbops = &nouveau_fbcon_ops; info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset - dev_priv->vm_vram_base; diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index dc1634b..dbf8696 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -224,7 +224,7 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev, drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); - info->flags = FBINFO_DEFAULT; + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; info->fbops = &radeonfb_ops; tmp = radeon_bo_gpu_offset(rbo) - rdev->mc.vram_start; diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 3b3f574..26bf7cb 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -283,7 +283,8 @@ static inline int fbcon_is_inactive(struct vc_data *vc, struct fb_info *info) struct fbcon_ops *ops = info->fbcon_par; return (info->state != FBINFO_STATE_RUNNING || - vc->vc_mode != KD_TEXT || ops->graphics); + vc->vc_mode != KD_TEXT || ops->graphics) && + !vt_force_oops_output(vc); } static inline int get_color(struct vc_data *vc, struct fb_info *info, @@ -1073,6 +1074,7 @@ static void fbcon_init(struct vc_data *vc, int init) if (p->userfont) charcnt = FNTCHARCNT(p->fontdata); + vc->vc_panic_force_write = !!(info->flags & FBINFO_CAN_FORCE_OUTPUT); vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1); vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; if (charcnt == 256) { diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 38fe59d..d7d9acd 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -105,6 +105,7 @@ struct vc_data { struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ unsigned long vc_uni_pagedir; unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ + bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */ /* additional information is in vt_kern.h */ }; diff --git a/include/linux/fb.h b/include/linux/fb.h index 0c5659c..f0268de 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -825,6 +825,10 @@ struct fb_tile_ops { */ #define FBINFO_BE_MATH 0x100000 +/* report to the VT layer that this fb driver can accept forced console + output like oopses */ +#define FBINFO_CAN_FORCE_OUTPUT 0x200000 + struct fb_info { int node; int flags; diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 7f56db4..56cce34 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -100,6 +100,13 @@ extern int unbind_con_driver(const struct consw *csw, int first, int last, int deflt); int vty_init(const struct file_operations *console_fops); +static inline bool vt_force_oops_output(struct vc_data *vc) +{ + if (oops_in_progress && vc->vc_panic_force_write) + return true; + return false; +} + /* * vc_screen.c shares this temporary buffer with the console write code so that * we can easily avoid touching user space while holding the console spinlock. -- cgit v0.10.2 From b4eda9cb48eac1b7369ad33e5d015c33b4376431 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:41 +0200 Subject: stallion: prune lock_kernel calls Remove unneeded tty layer lock kernel bits. Relock the needed bits using the port mutex. The istallion still has brd state races but those are not new or introduced by the removal of the lock_kernel logic. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4e395c9..750650c 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -14,6 +14,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * + * FIXME: brdp->state needs proper locking. */ /*****************************************************************************/ @@ -4011,6 +4012,7 @@ static int stli_getbrdstats(combrd_t __user *bp) return -ENODEV; memset(&stli_brdstats, 0, sizeof(combrd_t)); + stli_brdstats.brd = brdp->brdnr; stli_brdstats.type = brdp->brdtype; stli_brdstats.hwid = 0; @@ -4076,10 +4078,13 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) if (brdp == NULL) return -ENODEV; + mutex_lock(&portp->port.mutex); if (brdp->state & BST_STARTED) { if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, - &stli_cdkstats, sizeof(asystats_t), 1)) < 0) + &stli_cdkstats, sizeof(asystats_t), 1)) < 0) { + mutex_unlock(&portp->port.mutex); return rc; + } } else { memset(&stli_cdkstats, 0, sizeof(asystats_t)); } @@ -4124,6 +4129,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) stli_comstats.modem = stli_cdkstats.dcdcnt; stli_comstats.hwid = stli_cdkstats.hwid; stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals); + mutex_unlock(&portp->port.mutex); return 0; } @@ -4186,15 +4192,20 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) if (!brdp) return -ENODEV; + mutex_lock(&portp->port.mutex); + if (brdp->state & BST_STARTED) { - if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) + if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) { + mutex_unlock(&portp->port.mutex); return rc; + } } memset(&stli_comstats, 0, sizeof(comstats_t)); stli_comstats.brd = portp->brdnr; stli_comstats.panel = portp->panelnr; stli_comstats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t))) return -EFAULT; @@ -4266,8 +4277,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) done = 0; rc = 0; - lock_kernel(); - switch (cmd) { case COM_GETPORTSTATS: rc = stli_getportstats(NULL, NULL, argp); @@ -4290,8 +4299,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) done++; break; } - unlock_kernel(); - if (done) return rc; @@ -4308,8 +4315,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) if (brdp->state == 0) return -ENODEV; - lock_kernel(); - switch (cmd) { case STL_BINTR: EBRDINTR(brdp); @@ -4332,7 +4337,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 6049fd7..f2167f8 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -807,7 +807,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) timeout = HZ; tend = jiffies + timeout; - lock_kernel(); while (stl_datastate(portp)) { if (signal_pending(current)) break; @@ -815,7 +814,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) if (time_after_eq(jiffies, tend)) break; } - unlock_kernel(); } /*****************************************************************************/ @@ -1029,6 +1027,8 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); memset(&sio, 0, sizeof(struct serial_struct)); + + mutex_lock(&portp->port.mutex); sio.line = portp->portnr; sio.port = portp->ioaddr; sio.flags = portp->port.flags; @@ -1048,6 +1048,7 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) brdp = stl_brds[portp->brdnr]; if (brdp != NULL) sio.irq = brdp->irq; + mutex_unlock(&portp->port.mutex); return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; } @@ -1069,12 +1070,15 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) return -EFAULT; + mutex_lock(&portp->port.mutex); if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || (sio.close_delay != portp->close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != - (portp->port.flags & ~ASYNC_USR_MASK))) + (portp->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&portp->port.mutex); return -EPERM; + } } portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | @@ -1083,6 +1087,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp portp->close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; + mutex_unlock(&portp->port.mutex); stl_setport(portp, tty->termios); return 0; } @@ -1147,8 +1152,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd rc = 0; - lock_kernel(); - switch (cmd) { case TIOCGSERIAL: rc = stl_getserial(portp, argp); @@ -1173,7 +1176,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } @@ -2327,6 +2329,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst return -ENODEV; } + mutex_lock(&portp->port.mutex); portp->stats.state = portp->istate; portp->stats.flags = portp->port.flags; portp->stats.hwid = portp->hwid; @@ -2358,6 +2361,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst (STL_TXBUFSIZE - (tail - head)); portp->stats.signals = (unsigned long) stl_getsignals(portp); + mutex_unlock(&portp->port.mutex); return copy_to_user(cp, &portp->stats, sizeof(comstats_t)) ? -EFAULT : 0; @@ -2382,10 +2386,12 @@ static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) return -ENODEV; } + mutex_lock(&portp->port.mutex); memset(&portp->stats, 0, sizeof(comstats_t)); portp->stats.brd = portp->brdnr; portp->stats.panel = portp->panelnr; portp->stats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); return copy_to_user(cp, &portp->stats, sizeof(comstats_t)) ? -EFAULT : 0; } @@ -2451,7 +2457,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) return -ENODEV; rc = 0; - lock_kernel(); switch (cmd) { case COM_GETPORTSTATS: rc = stl_getportstats(NULL, NULL, argp); @@ -2472,7 +2477,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } -- cgit v0.10.2 From 8a1e803d0148e320b9200a442dfb88f8cbde88e7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:42 +0200 Subject: istallion: use bit ops for the board flags This lets us avoid problems with races on the flag changes Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 750650c..5e9a81d 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -14,7 +14,6 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * FIXME: brdp->state needs proper locking. */ /*****************************************************************************/ @@ -204,9 +203,9 @@ static int stli_shared; * the board has been detected, and whether it is actually running a slave * or not. */ -#define BST_FOUND 0x1 -#define BST_STARTED 0x2 -#define BST_PROBED 0x4 +#define BST_FOUND 0 +#define BST_STARTED 1 +#define BST_PROBED 2 /* * Define the set of port state flags. These are marked for internal @@ -817,7 +816,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) brdp = stli_brds[brdnr]; if (brdp == NULL) return -ENODEV; - if ((brdp->state & BST_STARTED) == 0) + if (!test_bit(BST_STARTED, &brdp->state)) return -ENODEV; portnr = MINOR2PORT(minordev); if (portnr > brdp->nrports) @@ -1847,7 +1846,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip rc = stli_portcmdstats(NULL, portp); uart = "UNKNOWN"; - if (brdp->state & BST_STARTED) { + if (test_bit(BST_STARTED, &brdp->state)) { switch (stli_comstats.hwid) { case 0: uart = "2681"; break; case 1: uart = "SC26198"; break; @@ -1856,7 +1855,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip } seq_printf(m, "%d: uart:%s ", portnr, uart); - if ((brdp->state & BST_STARTED) && (rc >= 0)) { + if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) { char sep; seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal, @@ -2356,7 +2355,7 @@ static void stli_poll(unsigned long arg) brdp = stli_brds[brdnr]; if (brdp == NULL) continue; - if ((brdp->state & BST_STARTED) == 0) + if (!test_bit(BST_STARTED, &brdp->state)) continue; spin_lock(&brd_lock); @@ -3141,7 +3140,7 @@ static int stli_initecp(struct stlibrd *brdp) } - brdp->state |= BST_FOUND; + set_bit(BST_FOUND, &brdp->state); return 0; err_unmap: iounmap(brdp->membase); @@ -3298,7 +3297,7 @@ static int stli_initonb(struct stlibrd *brdp) brdp->panels[0] = brdp->nrports; - brdp->state |= BST_FOUND; + set_bit(BST_FOUND, &brdp->state); return 0; err_unmap: iounmap(brdp->membase); @@ -3408,7 +3407,7 @@ stli_donestartup: spin_unlock_irqrestore(&brd_lock, flags); if (rc == 0) - brdp->state |= BST_STARTED; + set_bit(BST_STARTED, &brdp->state); if (! stli_timeron) { stli_timeron++; @@ -3711,7 +3710,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, if (retval) goto err_null; - brdp->state |= BST_PROBED; + set_bit(BST_PROBED, &brdp->state); pci_set_drvdata(pdev, brdp); EBRDENABLE(brdp); @@ -3842,7 +3841,7 @@ static int __init stli_initbrds(void) brdp = stli_brds[i]; if (brdp == NULL) continue; - if (brdp->state & BST_FOUND) { + if (test_bit(BST_FOUND, &brdp->state)) { EBRDENABLE(brdp); brdp->enable = NULL; brdp->disable = NULL; @@ -4079,7 +4078,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) return -ENODEV; mutex_lock(&portp->port.mutex); - if (brdp->state & BST_STARTED) { + if (test_bit(BST_STARTED, &brdp->state)) { if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, &stli_cdkstats, sizeof(asystats_t), 1)) < 0) { mutex_unlock(&portp->port.mutex); @@ -4194,7 +4193,7 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) mutex_lock(&portp->port.mutex); - if (brdp->state & BST_STARTED) { + if (test_bit(BST_STARTED, &brdp->state)) { if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) { mutex_unlock(&portp->port.mutex); return rc; @@ -4323,10 +4322,10 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = stli_startbrd(brdp); break; case STL_BSTOP: - brdp->state &= ~BST_STARTED; + clear_bit(BST_STARTED, &brdp->state); break; case STL_BRESET: - brdp->state &= ~BST_STARTED; + clear_bit(BST_STARTED, &brdp->state); EBRDRESET(brdp); if (stli_shared == 0) { if (brdp->reenable != NULL) @@ -4382,7 +4381,8 @@ static void istallion_cleanup_isa(void) unsigned int j; for (j = 0; (j < stli_nrbrds); j++) { - if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED)) + if ((brdp = stli_brds[j]) == NULL || + test_bit(BST_PROBED, &brdp->state)) continue; stli_cleanup_ports(brdp); diff --git a/include/linux/istallion.h b/include/linux/istallion.h index 7faca98..ad700a6 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -86,7 +86,7 @@ struct stlibrd { unsigned long magic; unsigned int brdnr; unsigned int brdtype; - unsigned int state; + unsigned long state; unsigned int nrpanels; unsigned int nrports; unsigned int nrdevs; -- cgit v0.10.2 From bf936f92a7a564a2cdb44bbe3bc797cd811bf625 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:43 +0200 Subject: riscom8: kill use of lock_kernel The riscom8 board uses lock_kernel to protect bits of the port setting ioctl logic. We can use the port mutex for this as the logic is internal and will also lock set versus open (a locking property that has been lost somewhere along the way) Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index b02332a..af4de1f 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -47,7 +47,6 @@ #include #include #include -#include #include #include @@ -1184,6 +1183,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, if (copy_from_user(&tmp, newinfo, sizeof(tmp))) return -EFAULT; + mutex_lock(&port->port.mutex); change_speed = ((port->port.flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); @@ -1191,8 +1191,10 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, if ((tmp.close_delay != port->port.close_delay) || (tmp.closing_wait != port->port.closing_wait) || ((tmp.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) + (port->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->port.mutex); return -EPERM; + } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | (tmp.flags & ASYNC_USR_MASK)); } else { @@ -1208,6 +1210,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, rc_change_speed(tty, bp, port); spin_unlock_irqrestore(&riscom_lock, flags); } + mutex_unlock(&port->port.mutex); return 0; } @@ -1220,12 +1223,15 @@ static int rc_get_serial_info(struct riscom_port *port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_CIRRUS; tmp.line = port - rc_port; + + mutex_lock(&port->port.mutex); tmp.port = bp->base; tmp.irq = bp->irq; tmp.flags = port->port.flags; tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC; tmp.close_delay = port->port.close_delay * HZ/100; tmp.closing_wait = port->port.closing_wait * HZ/100; + mutex_unlock(&port->port.mutex); tmp.xmit_fifo_size = CD180_NFIFO; return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -1242,14 +1248,10 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp, switch (cmd) { case TIOCGSERIAL: - lock_kernel(); retval = rc_get_serial_info(port, argp); - unlock_kernel(); break; case TIOCSSERIAL: - lock_kernel(); retval = rc_set_serial_info(tty, port, argp); - unlock_kernel(); break; default: retval = -ENOIOCTLCMD; -- cgit v0.10.2 From ec82db129e94c7896e732d21f2bb9ab8e7312fe0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:44 +0200 Subject: isicom: kill off the BKL As with the others we can use the port mutex to get the needed locking properties and fix the race with open. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 98310e1..c27e9d2 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -124,7 +124,6 @@ #include #include #include -#include #include #include #include @@ -872,7 +871,6 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty) static int isicom_open(struct tty_struct *tty, struct file *filp) { struct isi_port *port; - struct isi_board *card; struct tty_port *tport; tport = isicom_find_port(tty); @@ -1118,8 +1116,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, if (copy_from_user(&newinfo, info, sizeof(newinfo))) return -EFAULT; - lock_kernel(); - + mutex_lock(&port->port.mutex); reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != (newinfo.flags & ASYNC_SPD_MASK)); @@ -1128,7 +1125,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, (newinfo.closing_wait != port->port.closing_wait) || ((newinfo.flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { - unlock_kernel(); + mutex_unlock(&port->port.mutex); return -EPERM; } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | @@ -1145,7 +1142,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, isicom_config_port(tty); spin_unlock_irqrestore(&port->card->card_lock, flags); } - unlock_kernel(); + mutex_unlock(&port->port.mutex); return 0; } @@ -1154,7 +1151,7 @@ static int isicom_get_serial_info(struct isi_port *port, { struct serial_struct out_info; - lock_kernel(); + mutex_lock(&port->port.mutex); memset(&out_info, 0, sizeof(out_info)); /* out_info.type = ? */ out_info.line = port - isi_ports; @@ -1164,7 +1161,7 @@ static int isicom_get_serial_info(struct isi_port *port, /* out_info.baud_base = ? */ out_info.close_delay = port->port.close_delay; out_info.closing_wait = port->port.closing_wait; - unlock_kernel(); + mutex_unlock(&port->port.mutex); if (copy_to_user(info, &out_info, sizeof(out_info))) return -EFAULT; return 0; -- cgit v0.10.2 From 417b6e0e146ba38eec5d79777433e38c73d4feb1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:45 +0200 Subject: rocket: kill BKL We can use the port mutex for this and also for the hangup path so removing the problematic use of the hangup mutex in this driver. Fix up the locking on the various port flags while we are at it. Ultimately this driver needs to be using tty_port_ helpers which would sort this out far better. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 0e29a23..79c3bc6 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -73,7 +73,6 @@ #include #include #include -#include #include #include #include @@ -1017,6 +1016,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(port, tty, filp) == 0) return; + mutex_lock(&port->mutex); cp = &info->channel; /* * Before we drop DTR, make sure the UART transmitter @@ -1060,9 +1060,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp) info->xmit_buf = NULL; } } + spin_lock_irq(&port->lock); info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); tty->closing = 0; + spin_unlock_irq(&port->lock); + mutex_unlock(&port->mutex); tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1210,11 +1214,13 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo) if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof (tmp)); + mutex_lock(&info->port.mutex); tmp.line = info->line; tmp.flags = info->flags; tmp.close_delay = info->port.close_delay; tmp.closing_wait = info->port.closing_wait; tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; + mutex_unlock(&info->port.mutex); if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) return -EFAULT; @@ -1229,10 +1235,13 @@ static int set_config(struct tty_struct *tty, struct r_port *info, if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) return -EFAULT; + mutex_lock(&info->port.mutex); if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) + if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { + mutex_unlock(&info->port.mutex); return -EPERM; + } info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); configure_r_port(tty, info, NULL); return 0; @@ -1250,6 +1259,7 @@ static int set_config(struct tty_struct *tty, struct r_port *info, tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) tty->alt_speed = 460800; + mutex_unlock(&info->port.mutex); configure_r_port(tty, info, NULL); return 0; @@ -1325,8 +1335,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) return -ENXIO; - lock_kernel(); - switch (cmd) { case RCKP_GET_STRUCT: if (copy_to_user(argp, info, sizeof (struct r_port))) @@ -1350,7 +1358,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, default: ret = -ENOIOCTLCMD; } - unlock_kernel(); return ret; } @@ -1471,7 +1478,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) jiffies); printk(KERN_INFO "cps=%d...\n", info->cps); #endif - lock_kernel(); while (1) { txcnt = sGetTxCnt(cp); if (!txcnt) { @@ -1499,7 +1505,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) break; } __set_current_state(TASK_RUNNING); - unlock_kernel(); #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); #endif @@ -1512,6 +1517,7 @@ static void rp_hangup(struct tty_struct *tty) { CHANNEL_t *cp; struct r_port *info = tty->driver_data; + unsigned long flags; if (rocket_paranoia_check(info, "rp_hangup")) return; @@ -1520,11 +1526,15 @@ static void rp_hangup(struct tty_struct *tty) printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); - if (info->port.flags & ASYNC_CLOSING) + spin_lock_irqsave(&info->port.lock, flags); + if (info->port.flags & ASYNC_CLOSING) { + spin_unlock_irqrestore(&info->port.lock, flags); return; + } if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + spin_unlock_irqrestore(&info->port.lock, flags); tty_port_hangup(&info->port); @@ -1535,7 +1545,7 @@ static void rp_hangup(struct tty_struct *tty) sDisCTSFlowCtl(cp); sDisTxSoftFlowCtl(cp); sClrTxXOFF(cp); - info->port.flags &= ~ASYNC_INITIALIZED; + clear_bit(ASYNCB_INITIALIZED, &info->port.flags); wake_up_interruptible(&info->port.open_wait); } -- cgit v0.10.2 From f602501d90e0da28c8e6f5e4569b8bf5d40a9d9c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:46 +0200 Subject: synclink: kill the big kernel lock We don't need it while waiting and we can lock the ioctls using the port mutex. While at it eliminate use of the hangup mutex and switch to the port mutex. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 0658fc5..2b03d4d 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -81,7 +81,6 @@ #include #include #include -#include #include #include #include @@ -2436,7 +2435,9 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user * if (!user_icount) { memset(&info->icount, 0, sizeof(info->icount)); } else { + mutex_lock(&info->port.mutex); COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); if (err) return -EFAULT; } @@ -2461,7 +2462,9 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p printk("%s(%d):mgsl_get_params(%s)\n", __FILE__,__LINE__, info->device_name); + mutex_lock(&info->port.mutex); COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); if (err) { if ( debug_level >= DEBUG_LEVEL_INFO ) printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", @@ -2501,11 +2504,13 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa return -EFAULT; } + mutex_lock(&info->port.mutex); spin_lock_irqsave(&info->irq_spinlock,flags); memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->irq_spinlock,flags); mgsl_change_params(info); + mutex_unlock(&info->port.mutex); return 0; @@ -2935,7 +2940,6 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { struct mgsl_struct * info = tty->driver_data; - int ret; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2950,10 +2954,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, return -EIO; } - lock_kernel(); - ret = mgsl_ioctl_common(info, cmd, arg); - unlock_kernel(); - return ret; + return mgsl_ioctl_common(info, cmd, arg); } static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) @@ -3109,12 +3110,14 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - + + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); mgsl_flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -3162,7 +3165,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) * Note: use tight timings here to satisfy the NIST-PCTS. */ - lock_kernel(); if ( info->params.data_rate ) { char_time = info->timeout/(32 * 5); if (!char_time) @@ -3192,7 +3194,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) break; } } - unlock_kernel(); exit: if (debug_level >= DEBUG_LEVEL_INFO) diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 334cf5c..3c7ac6a 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -40,8 +40,8 @@ #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) -//#define DBGTBUF(info) dump_tbufs(info) -//#define DBGRBUF(info) dump_rbufs(info) +/*#define DBGTBUF(info) dump_tbufs(info)*/ +/*#define DBGRBUF(info) dump_rbufs(info)*/ #include @@ -62,7 +62,6 @@ #include #include #include -#include #include #include #include @@ -901,8 +900,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) * Note: use tight timings here to satisfy the NIST-PCTS. */ - lock_kernel(); - if (info->params.data_rate) { char_time = info->timeout/(32 * 5); if (!char_time) @@ -920,8 +917,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } - unlock_kernel(); - exit: DBGINFO(("%s wait_until_sent exit\n", info->device_name)); } @@ -1041,8 +1036,37 @@ static int ioctl(struct tty_struct *tty, struct file *file, return -EIO; } - lock_kernel(); - + switch (cmd) { + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + p_cuser = argp; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd) || + put_user(cnow.rx, &p_cuser->rx) || + put_user(cnow.tx, &p_cuser->tx) || + put_user(cnow.frame, &p_cuser->frame) || + put_user(cnow.overrun, &p_cuser->overrun) || + put_user(cnow.parity, &p_cuser->parity) || + put_user(cnow.brk, &p_cuser->brk) || + put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) + return -EFAULT; + return 0; + case MGSL_IOCSGPIO: + return set_gpio(info, argp); + case MGSL_IOCGGPIO: + return get_gpio(info, argp); + case MGSL_IOCWAITGPIO: + return wait_gpio(info, argp); + } + mutex_lock(&info->port.mutex); switch (cmd) { case MGSL_IOCGPARAMS: ret = get_params(info, argp); @@ -1068,50 +1092,16 @@ static int ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCGSTATS: ret = get_stats(info, argp); break; - case MGSL_IOCWAITEVENT: - ret = wait_mgsl_event(info, argp); - break; - case TIOCMIWAIT: - ret = modem_input_wait(info,(int)arg); - break; case MGSL_IOCGIF: ret = get_interface(info, argp); break; case MGSL_IOCSIF: ret = set_interface(info,(int)arg); break; - case MGSL_IOCSGPIO: - ret = set_gpio(info, argp); - break; - case MGSL_IOCGGPIO: - ret = get_gpio(info, argp); - break; - case MGSL_IOCWAITGPIO: - ret = wait_gpio(info, argp); - break; - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd) || - put_user(cnow.rx, &p_cuser->rx) || - put_user(cnow.tx, &p_cuser->tx) || - put_user(cnow.frame, &p_cuser->frame) || - put_user(cnow.overrun, &p_cuser->overrun) || - put_user(cnow.parity, &p_cuser->parity) || - put_user(cnow.brk, &p_cuser->brk) || - put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - ret = -EFAULT; - ret = 0; - break; default: ret = -ENOIOCTLCMD; } - unlock_kernel(); + mutex_unlock(&info->port.mutex); return ret; } diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 2b18adc..8da976b 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -52,7 +52,6 @@ #include #include #include -#include #include #include #include @@ -1062,9 +1061,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) if (sanity_check(info, tty->name, "wait_until_sent")) return; - lock_kernel(); - - if (!(info->port.flags & ASYNC_INITIALIZED)) + if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags)) goto exit; orig_jiffies = jiffies; @@ -1094,8 +1091,10 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) break; } } else { - //TODO: determine if there is something similar to USC16C32 - // TXSTATUS_ALL_SENT status + /* + * TODO: determine if there is something similar to USC16C32 + * TXSTATUS_ALL_SENT status + */ while ( info->tx_active && info->tx_enabled) { msleep_interruptible(jiffies_to_msecs(char_time)); if (signal_pending(current)) @@ -1106,7 +1105,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) } exit: - unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s wait_until_sent() exit\n", __FILE__,__LINE__, info->device_name ); @@ -1122,7 +1120,6 @@ static int write_room(struct tty_struct *tty) if (sanity_check(info, tty->name, "write_room")) return 0; - lock_kernel(); if (info->params.mode == MGSL_MODE_HDLC) { ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; } else { @@ -1130,7 +1127,6 @@ static int write_room(struct tty_struct *tty) if (ret < 0) ret = 0; } - unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s write_room()=%d\n", @@ -1251,7 +1247,7 @@ static void tx_release(struct tty_struct *tty) * * Return Value: 0 if success, otherwise error code */ -static int do_ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = tty->driver_data; @@ -1341,16 +1337,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file, return 0; } -static int ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int ret; - lock_kernel(); - ret = do_ioctl(tty, file, cmd, arg); - unlock_kernel(); - return ret; -} - /* * /proc fs routines.... */ @@ -2883,7 +2869,9 @@ static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) if (!user_icount) { memset(&info->icount, 0, sizeof(info->icount)); } else { + mutex_lock(&info->port.mutex); COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); if (err) return -EFAULT; } @@ -2898,7 +2886,9 @@ static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) printk("%s(%d):%s get_params()\n", __FILE__,__LINE__, info->device_name); + mutex_lock(&info->port.mutex); COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); if (err) { if ( debug_level >= DEBUG_LEVEL_INFO ) printk( "%s(%d):%s get_params() user buffer copy failed\n", @@ -2926,11 +2916,13 @@ static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) return -EFAULT; } + mutex_lock(&info->port.mutex); spin_lock_irqsave(&info->lock,flags); memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->lock,flags); change_params(info); + mutex_unlock(&info->port.mutex); return 0; } -- cgit v0.10.2 From 25c3cdf80c73156e910a322aba468ddaca0b91ae Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:47 +0200 Subject: cyclades: Kill off BKL usage Use the port mutext for config setting, the rest is locked sufficiently anyway that the BKL makes no odds. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 9824b416..51acfe3 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -65,7 +65,6 @@ #include #include #include -#include #include #include #include @@ -1655,7 +1654,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) return; /* Just in case.... */ orig_jiffies = jiffies; - lock_kernel(); /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1702,7 +1700,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) } /* Run one more char cycle */ msleep_interruptible(jiffies_to_msecs(char_time * 5)); - unlock_kernel(); #ifdef CY_DEBUG_WAIT_UNTIL_SENT printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); #endif @@ -1959,7 +1956,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty) int char_count; __u32 tx_put, tx_get, tx_bufsize; - lock_kernel(); tx_get = readl(&buf_ctrl->tx_get); tx_put = readl(&buf_ctrl->tx_put); tx_bufsize = readl(&buf_ctrl->tx_bufsize); @@ -1971,7 +1967,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty) printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); #endif - unlock_kernel(); return info->xmit_cnt + char_count; } #endif /* Z_EXT_CHARS_IN_BUFFER */ @@ -2359,17 +2354,22 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, struct serial_struct __user *new_info) { struct serial_struct new_serial; + int ret; if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; + mutex_lock(&info->port.mutex); if (!capable(CAP_SYS_ADMIN)) { if (new_serial.close_delay != info->port.close_delay || new_serial.baud_base != info->baud || (new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + { + mutex_unlock(&info->port.mutex); return -EPERM; + } info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK); info->baud = new_serial.baud_base; @@ -2392,10 +2392,12 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, check_and_exit: if (info->port.flags & ASYNC_INITIALIZED) { cy_set_line_char(info, tty); - return 0; + ret = 0; } else { - return cy_startup(info, tty); + ret = cy_startup(info, tty); } + mutex_unlock(&info->port.mutex); + return ret; } /* set_serial_info */ /* @@ -2438,7 +2440,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) card = info->card; - lock_kernel(); if (!cy_is_Z(card)) { unsigned long flags; int channel = info->line - card->first_line; @@ -2478,7 +2479,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); } end: - unlock_kernel(); return result; } /* cy_tiomget */ @@ -2696,7 +2696,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); #endif - lock_kernel(); switch (cmd) { case CYGETMON: @@ -2817,7 +2816,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, default: ret_val = -ENOIOCTLCMD; } - unlock_kernel(); #ifdef CY_DEBUG_OTHER printk(KERN_DEBUG "cyc:cy_ioctl done\n"); -- cgit v0.10.2 From 7cc34fd028ef35b12fec0fa9268c37c099d33bd2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:48 +0200 Subject: epca: Kill the big kernel lock The lock is no longer needed for wait until sent paths so this can go Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 6f5ffe1..d9df46a 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include #include @@ -2105,7 +2105,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, break; case DIGI_SETAW: case DIGI_SETAF: - lock_kernel(); if (cmd == DIGI_SETAW) { /* Setup an event to indicate when the transmit buffer empties */ @@ -2118,7 +2117,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, if (tty->ldisc->ops->flush_buffer) tty->ldisc->ops->flush_buffer(tty); } - unlock_kernel(); /* Fall Thru */ case DIGI_SETA: if (copy_from_user(&ch->digiext, argp, sizeof(digi_t))) -- cgit v0.10.2 From 7479db07011c9c85a65eeb03724193230af0a99d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:49 +0200 Subject: specialix: Kill the BKL Use the port mutex instead Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 2c24fcd..7be456f 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1863,8 +1863,7 @@ static int sx_set_serial_info(struct specialix_port *port, return -EFAULT; } - lock_kernel(); - + mutex_lock(&port->port.mutex); change_speed = ((port->port.flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); change_speed |= (tmp.custom_divisor != port->custom_divisor); @@ -1875,7 +1874,7 @@ static int sx_set_serial_info(struct specialix_port *port, ((tmp.flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { func_exit(); - unlock_kernel(); + mutex_unlock(&port->port.mutex); return -EPERM; } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | @@ -1892,7 +1891,7 @@ static int sx_set_serial_info(struct specialix_port *port, sx_change_speed(bp, port); func_exit(); - unlock_kernel(); + mutex_unlock(&port->port.mutex); return 0; } @@ -1906,7 +1905,7 @@ static int sx_get_serial_info(struct specialix_port *port, func_enter(); memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); + mutex_lock(&port->port.mutex); tmp.type = PORT_CIRRUS; tmp.line = port - sx_port; tmp.port = bp->base; @@ -1917,7 +1916,7 @@ static int sx_get_serial_info(struct specialix_port *port, tmp.closing_wait = port->port.closing_wait * HZ/100; tmp.custom_divisor = port->custom_divisor; tmp.xmit_fifo_size = CD186x_NFIFO; - unlock_kernel(); + mutex_unlock(&port->port.mutex); if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { func_exit(); return -EFAULT; -- cgit v0.10.2 From 4287341d4dba27ef8048f589e3c0bc683c9f2017 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 19 May 2010 13:01:56 +0100 Subject: tty: Fix the digi acceleport driver NULL checks This now refcounts but doesn't actually check the reference was obtained in all the places it should. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index fd35f73..b92070c 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -609,8 +609,10 @@ static void digi_wakeup_write_lock(struct work_struct *work) static void digi_wakeup_write(struct usb_serial_port *port) { struct tty_struct *tty = tty_port_tty_get(&port->port); - tty_wakeup(tty); - tty_kref_put(tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } @@ -1682,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb) priv->dp_throttle_restart = 1; /* receive data */ - if (opcode == DIGI_CMD_RECEIVE_DATA) { + if (tty && opcode == DIGI_CMD_RECEIVE_DATA) { /* get flag from port_status */ flag = 0; @@ -1763,10 +1765,12 @@ static int digi_read_oob_callback(struct urb *urb) return -1; tty = tty_port_tty_get(&port->port); + rts = 0; - rts = tty->termios->c_cflag & CRTSCTS; + if (tty) + rts = tty->termios->c_cflag & CRTSCTS; - if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { + if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); /* convert from digi flags to termiox flags */ if (val & DIGI_READ_INPUT_SIGNALS_CTS) { -- cgit v0.10.2 From a360fae67bc173942f620d44d1b23cfb5ccaaf96 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:50 +0200 Subject: synclink: reworking locking a bit Use the port mutex and port lock to fix the various races. The locking still isn't totally consistent but its better than before. Wants switching to the port helpers. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 3c7ac6a..5a602eb 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -675,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp) goto cleanup; } + mutex_lock(&info->port.mutex); info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { retval = -EBUSY; spin_unlock_irqrestore(&info->netlock, flags); + mutex_unlock(&info->port.mutex); goto cleanup; } info->port.count++; @@ -692,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp) if (retval < 0) goto cleanup; } - + mutex_unlock(&info->port.mutex); retval = block_til_ready(tty, filp, info); if (retval) { DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); @@ -724,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -740,17 +744,23 @@ cleanup: static void hangup(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; + unsigned long flags; if (sanity_check(info, tty->name, "hangup")) return; DBGINFO(("%s hangup\n", info->device_name)); flush_buffer(tty); + + mutex_lock(&info->port.mutex); shutdown(info); + spin_lock_irqsave(&info->port.lock, flags); info->port.count = 0; info->port.flags &= ~ASYNC_NORMAL_ACTIVE; info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); wake_up_interruptible(&info->port.open_wait); } diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 8da976b..ac447c7 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -812,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - + + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -834,6 +836,7 @@ cleanup: static void hangup(struct tty_struct *tty) { SLMP_INFO *info = tty->driver_data; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s hangup()\n", @@ -842,12 +845,16 @@ static void hangup(struct tty_struct *tty) if (sanity_check(info, tty->name, "hangup")) return; + mutex_lock(&info->port.mutex); flush_buffer(tty); shutdown(info); + spin_lock_irqsave(&info->port.lock, flags); info->port.count = 0; info->port.flags &= ~ASYNC_NORMAL_ACTIVE; info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); wake_up_interruptible(&info->port.open_wait); } -- cgit v0.10.2 From 192251352f912bccfb942ea35801d2357f11f592 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:51 +0200 Subject: tty: serial - fix various misuses/mishandlings of port->tty Make it robust against hang up events. In most cases we can do this simply by passing the right things in the first place. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 7f28307..12ee7e0 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -58,7 +58,7 @@ static struct lock_class_key port_lock_key; #define uart_console(port) (0) #endif -static void uart_change_speed(struct uart_state *state, +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, int pm_state); @@ -137,7 +137,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. */ -static int uart_startup(struct uart_state *state, int init_hw) +static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; @@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw) * once we have successfully opened the port. Also set * up the tty->alt_speed kludge */ - set_bit(TTY_IO_ERROR, &port->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); if (uport->type == PORT_UNKNOWN) return 0; @@ -177,26 +177,26 @@ static int uart_startup(struct uart_state *state, int init_hw) /* * Initialise the hardware port settings. */ - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); /* * Setup the RTS and DTR signals once the * port is open and ready to respond. */ - if (port->tty->termios->c_cflag & CBAUD) + if (tty->termios->c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } if (port->flags & ASYNC_CTS_FLOW) { spin_lock_irq(&uport->lock); if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - port->tty->hw_stopped = 1; + tty->hw_stopped = 1; spin_unlock_irq(&uport->lock); } set_bit(ASYNCB_INITIALIZED, &port->flags); - clear_bit(TTY_IO_ERROR, &port->tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); } if (retval && capable(CAP_SYS_ADMIN)) @@ -210,11 +210,10 @@ static int uart_startup(struct uart_state *state, int init_hw) * DTR is dropped if the hangup on close termio flag is on. Calls to * uart_shutdown are serialised by the per-port semaphore. */ -static void uart_shutdown(struct uart_state *state) +static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; - struct tty_struct *tty = port->tty; /* * Set the TTY IO error marker @@ -430,11 +429,10 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) EXPORT_SYMBOL(uart_get_divisor); /* FIXME: Consistent locking policy */ -static void -uart_change_speed(struct uart_state *state, struct ktermios *old_termios) +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios) { struct tty_port *port = &state->port; - struct tty_struct *tty = port->tty; struct uart_port *uport = state->uart_port; struct ktermios *termios; @@ -463,8 +461,8 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios) uport->ops->set_termios(uport, termios, old_termios); } -static inline int -__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c) +static inline int __uart_put_char(struct uart_port *port, + struct circ_buf *circ, unsigned char c) { unsigned long flags; int ret = 0; @@ -494,8 +492,8 @@ static void uart_flush_chars(struct tty_struct *tty) uart_start(tty); } -static int -uart_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int uart_write(struct tty_struct *tty, + const unsigned char *buf, int count) { struct uart_state *state = tty->driver_data; struct uart_port *port; @@ -675,7 +673,7 @@ static int uart_get_info(struct uart_state *state, return 0; } -static int uart_set_info(struct uart_state *state, +static int uart_set_info(struct tty_struct *tty, struct uart_state *state, struct serial_struct __user *newinfo) { struct serial_struct new_serial; @@ -770,7 +768,7 @@ static int uart_set_info(struct uart_state *state, * We need to shutdown the serial port at the old * port/type/irq combination. */ - uart_shutdown(state); + uart_shutdown(tty, state); } if (change_port) { @@ -869,25 +867,27 @@ static int uart_set_info(struct uart_state *state, "is deprecated.\n", current->comm, tty_name(port->tty, buf)); } - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); } } else - retval = uart_startup(state, 1); + retval = uart_startup(tty, state, 1); exit: mutex_unlock(&port->mutex); return retval; } - -/* - * uart_get_lsr_info - get line status register info. - * Note: uart_ioctl protects us against hangups. +/** + * uart_get_lsr_info - get line status register info + * @tty: tty associated with the UART + * @state: UART being queried + * @value: returned modem value + * + * Note: uart_ioctl protects us against hangups. */ -static int uart_get_lsr_info(struct uart_state *state, - unsigned int __user *value) +static int uart_get_lsr_info(struct tty_struct *tty, + struct uart_state *state, unsigned int __user *value) { struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; unsigned int result; result = uport->ops->tx_empty(uport); @@ -900,7 +900,7 @@ static int uart_get_lsr_info(struct uart_state *state, */ if (uport->x_char || ((uart_circ_chars_pending(&state->xmit) > 0) && - !port->tty->stopped && !port->tty->hw_stopped)) + !tty->stopped && !tty->hw_stopped)) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -961,7 +961,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int uart_do_autoconfig(struct uart_state *state) +static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; @@ -980,7 +980,7 @@ static int uart_do_autoconfig(struct uart_state *state) ret = -EBUSY; if (tty_port_users(port) == 1) { - uart_shutdown(state); + uart_shutdown(tty, state); /* * If we already have a port type configured, @@ -999,7 +999,7 @@ static int uart_do_autoconfig(struct uart_state *state) */ uport->ops->config_port(uport, flags); - ret = uart_startup(state, 1); + ret = uart_startup(tty, state, 1); } mutex_unlock(&port->mutex); return ret; @@ -1122,11 +1122,11 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, break; case TIOCSSERIAL: - ret = uart_set_info(state, uarg); + ret = uart_set_info(tty, state, uarg); break; case TIOCSERCONFIG: - ret = uart_do_autoconfig(state); + ret = uart_do_autoconfig(tty, state); break; case TIOCSERGWILD: /* obsolete */ @@ -1172,7 +1172,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, */ switch (cmd) { case TIOCSERGETLSR: /* Get line status register */ - ret = uart_get_lsr_info(state, uarg); + ret = uart_get_lsr_info(tty, state, uarg); break; default: { @@ -1219,7 +1219,7 @@ static void uart_set_termios(struct tty_struct *tty, return; } - uart_change_speed(state, old_termios); + uart_change_speed(tty, state, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) @@ -1335,7 +1335,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) uart_wait_until_sent(tty, uport->timeout); } - uart_shutdown(state); + uart_shutdown(tty, state); uart_flush_buffer(tty); tty_ldisc_flush(tty); @@ -1436,7 +1436,7 @@ static void uart_hangup(struct tty_struct *tty) mutex_lock(&port->mutex); if (port->flags & ASYNC_NORMAL_ACTIVE) { uart_flush_buffer(tty); - uart_shutdown(state); + uart_shutdown(tty, state); port->count = 0; clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); tty_port_tty_set(port, NULL); @@ -1446,15 +1446,19 @@ static void uart_hangup(struct tty_struct *tty) mutex_unlock(&port->mutex); } -/* - * Copy across the serial console cflag setting into the termios settings - * for the initial open of the port. This allows continuity between the - * kernel settings, and the settings init adopts when it opens the port - * for the first time. +/** + * uart_update_termios - update the terminal hw settings + * @tty: tty associated with UART + * @state: UART to update + * + * Copy across the serial console cflag setting into the termios settings + * for the initial open of the port. This allows continuity between the + * kernel settings, and the settings init adopts when it opens the port + * for the first time. */ -static void uart_update_termios(struct uart_state *state) +static void uart_update_termios(struct tty_struct *tty, + struct uart_state *state) { - struct tty_struct *tty = state->port.tty; struct uart_port *port = state->uart_port; if (uart_console(port) && port->cons->cflag) { @@ -1471,7 +1475,7 @@ static void uart_update_termios(struct uart_state *state) /* * Make termios settings take effect. */ - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); /* * And finally enable the RTS and DTR signals. @@ -1668,7 +1672,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) /* * Start up the serial port. */ - retval = uart_startup(state, 0); + retval = uart_startup(tty, state, 0); /* * If we succeeded, wait until the port is ready. @@ -1683,7 +1687,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) { set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - uart_update_termios(state); + uart_update_termios(tty, state); } fail: @@ -2010,9 +2014,13 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) struct tty_port *port = &state->port; struct device *tty_dev; struct uart_match match = {uport, drv}; + struct tty_struct *tty; mutex_lock(&port->mutex); + /* Must be inside the mutex lock until we convert to tty_port */ + tty = port->tty; + tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2105,9 +2113,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); if (console_suspend_enabled || !uart_console(uport)) { + /* Protected by port mutex for now */ + struct tty_struct *tty = port->tty; ret = ops->startup(uport); if (ret == 0) { - uart_change_speed(state, NULL); + if (tty) + uart_change_speed(tty, state, NULL); spin_lock_irq(&uport->lock); ops->set_mctrl(uport, uport->mctrl); ops->start_tx(uport); @@ -2119,7 +2130,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) * Clear the "initialized" flag so we won't try * to call the low level drivers shutdown method. */ - uart_shutdown(state); + uart_shutdown(tty, state); } } -- cgit v0.10.2 From eab4f5af6b07009d1fc48bac5f3215c0cbfb2fc3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:52 +0200 Subject: tty: serial - fix tty back references in termios One or two drivers go poking back into the tty from the termios setting routine in unsafe ways. We don't need to pass the tty down because the [ab]users are just using it to get at things they can get at anyway. This leaves low_latency setting to sort out along with set_ldisc use. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 8681f13..d89aa38 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int baud, quot, h_lcr; + unsigned int baud, quot, h_lcr, b; /* * We don't support modem control lines. @@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); - - if (port->state && port->state->port.tty) { - struct tty_struct *tty = port->state->port.tty; - unsigned int b = port->uartclk / (16 * quot); - tty_encode_baud_rate(tty, b, b); - } + b = port->uartclk / (16 * quot); + tty_termios_encode_baud_rate(termios, b, b); switch (termios->c_cflag & CSIZE) { case CS5: diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index eacb588..66ecc7a 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); - if (port->state && port->state->port.tty) { - tdiv64 = sport->port.uartclk; - tdiv64 *= num; - do_div(tdiv64, denom * 16 * div); - tty_encode_baud_rate(sport->port.state->port.tty, + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_termios_encode_baud_rate(termios, (speed_t)tdiv64, (speed_t)tdiv64); - } num -= 1; denom -= 1; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index f164ba4..93de907 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port, struct ktermios *new_termios, struct ktermios *old_termios) { struct ioc3_port *port = get_ioc3_port(the_port); - unsigned int cflag; + unsigned int cflag, iflag; int baud; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; struct uart_state *state = the_port->state; cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; switch (cflag & CSIZE) { case CS5: @@ -1000,12 +1001,12 @@ ioc3_change_speed(struct uart_port *the_port, state->port.tty->low_latency = 1; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR | N_FRAMING_ERROR); - if (I_IGNBRK(state->port.tty)) { + if (iflag & IGNBRK) { the_port->ignore_status_mask &= ~N_BREAK; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; } if (!(cflag & CREAD)) { diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 8ad28fc..fcfe826 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1685,11 +1685,12 @@ ioc4_change_speed(struct uart_port *the_port, { struct ioc4_port *port = get_ioc4_port(the_port, 0); int baud, bits; - unsigned cflag; + unsigned cflag, iflag; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; struct uart_state *state = the_port->state; cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; switch (cflag & CSIZE) { case CS5: @@ -1741,12 +1742,12 @@ ioc4_change_speed(struct uart_port *the_port, state->port.tty->low_latency = 1; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR | N_FRAMING_ERROR); - if (I_IGNBRK(state->port.tty)) { + if (iflag & IGNBRK) { the_port->ignore_status_mask &= ~N_BREAK; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; } if (!(cflag & CREAD)) { diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c index 3351c3b..beb1afa2 100644 --- a/drivers/serial/max3100.c +++ b/drivers/serial/max3100.c @@ -430,17 +430,14 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, int baud = 0; unsigned cflag; u32 param_new, param_mask, parity = 0; - struct tty_struct *tty = s->port.state->port.tty; dev_dbg(&s->spi->dev, "%s\n", __func__); - if (!tty) - return; cflag = termios->c_cflag; param_new = 0; param_mask = 0; - baud = tty_get_baud_rate(tty); + baud = tty_termios_baud_rate(termios); param_new = s->conf & MAX3100_BAUD; switch (baud) { case 300: @@ -485,7 +482,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, default: baud = s->baud; } - tty_encode_baud_rate(tty, baud, baud); + tty_termios_encode_baud_rate(termios, baud, baud); s->baud = baud; param_mask |= MAX3100_BAUD; -- cgit v0.10.2 From d87d9b7d19f04b16c4406d3c0feeca10090e0ada Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:53 +0200 Subject: tty: serial - fix tty referencing in set_ldisc Pass down the ldisc number so that the drivers don't have to peek into the tty object themselves. This lets us get rid of another case of back referencing port to tty which we don't want (because of races versus hangup/close). Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 511cbf6..a9eff2b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -957,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_serial_set_ldisc(struct uart_port *port) +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) { int line = port->line; unsigned short val; - if (line >= port->state->port.tty->driver->num) - return; - - switch (port->state->port.tty->termios->c_line) { + switch (ld) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 12ee7e0..570dca2 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1194,7 +1194,7 @@ static void uart_set_ldisc(struct tty_struct *tty) struct uart_port *uport = state->uart_port; if (uport->ops->set_ldisc) - uport->ops->set_ldisc(uport); + uport->ops->set_ldisc(uport, tty->termios->c_line); } static void uart_set_termios(struct tty_struct *tty, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f10db6e..3292816 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -220,7 +220,7 @@ struct uart_ops { void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); - void (*set_ldisc)(struct uart_port *); + void (*set_ldisc)(struct uart_port *, int new); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); int (*set_wake)(struct uart_port *, unsigned int state); -- cgit v0.10.2 From e33ac1c10b6baaac68d18d931e120d8b96e8c5f8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:54 +0200 Subject: vc: Locking clean up The virtual console layer uses the BKL for various things that don't really need it. Clean them out. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f97b9e8..6e79340 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -26,6 +26,7 @@ #include #include #include +#include /* Don't take this from : 011-015 on the screen aren't spaces */ #define isspace(c) ((c) == ' ') @@ -312,6 +313,8 @@ int paste_selection(struct tty_struct *tty) struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); + lock_kernel(); + acquire_console_sem(); poke_blanked_console(); release_console_sem(); @@ -335,5 +338,6 @@ int paste_selection(struct tty_struct *tty) __set_current_state(TASK_RUNNING); tty_ldisc_deref(ld); + unlock_kernel(); return 0; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 82f64ac..9f67ad9 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -287,8 +287,12 @@ static inline unsigned short *screenpos(struct vc_data *vc, int offset, int view return p; } +/* Called from the keyboard irq path.. */ static inline void scrolldelta(int lines) { + /* FIXME */ + /* scrolldelta needs some kind of consistency lock, but the BKL was + and still is not protecting versus the scheduled back end */ scrollback_delta += lines; schedule_console_callback(); } @@ -2616,8 +2620,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) return -EFAULT; ret = 0; - lock_kernel(); - switch (type) { case TIOCL_SETSEL: @@ -2692,7 +2694,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) ret = -EINVAL; break; } - unlock_kernel(); return ret; } -- cgit v0.10.2 From ff917ba4f1a6189f90ed2c975984d6a1a1dc553d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:55 +0200 Subject: tty: Make vt's have a tty_port The vt layer isn't safely handling reference counts to tty object on the input side. Add a tty port structure to the vt layer in order to implement this using the standard helpers. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 9f67ad9..295af82 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -783,6 +783,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!vc) return -ENOMEM; vc_cons[currcons].d = vc; + tty_port_init(&vc->port); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); if (!*vc->vc_uni_pagedir_loc) @@ -2921,6 +2922,7 @@ static int __init con_init(void) for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); + tty_port_init(&vc->port); visual_init(vc, currcons, 1); vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); vc_init(vc, vc->vc_rows, vc->vc_cols, diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index d7d9acd..25bf67f 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -21,6 +21,8 @@ struct vt_struct; #define NPAR 16 struct vc_data { + struct tty_port port; /* Upper level data */ + unsigned short vc_num; /* Console number */ unsigned int vc_cols; /* [#] Console size */ unsigned int vc_rows; -- cgit v0.10.2 From 8ce73264b75be4d5ed480440ac32dfc1f25ff678 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:56 +0200 Subject: tty: Move the vt_tty field from the vc_data into the standard tty_port This takes all the tty references through the expected interface points so we can refcount them. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 25be210..a7ca752 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -299,7 +299,7 @@ int kbd_rate(struct kbd_repeat *rep) */ static void put_queue(struct vc_data *vc, int ch) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (tty) { tty_insert_flip_char(tty, ch, 0); @@ -309,7 +309,7 @@ static void put_queue(struct vc_data *vc, int ch) static void puts_queue(struct vc_data *vc, char *cp) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (!tty) return; @@ -485,7 +485,7 @@ static void fn_show_ptregs(struct vc_data *vc) static void fn_hold(struct vc_data *vc) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (rep || !tty) return; @@ -563,7 +563,7 @@ static void fn_inc_console(struct vc_data *vc) static void fn_send_intr(struct vc_data *vc) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (!tty) return; @@ -1162,7 +1162,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down }; int rc; - tty = vc->vc_tty; + tty = vc->port.tty; if (tty && (!tty->driver_data)) { /* No driver data? Strange. Okay we fix it then. */ diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 295af82..c734f9b 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -973,12 +973,12 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, * Resize a virtual console as seen from the console end of things. We * use the common vc_do_resize methods to update the structures. The * caller must hold the console sem to protect console internals and - * vc->vc_tty + * vc->port.tty */ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { - return vc_do_resize(vc->vc_tty, vc, cols, rows); + return vc_do_resize(vc->port.tty, vc, cols, rows); } /** @@ -2807,12 +2807,12 @@ static int con_open(struct tty_struct *tty, struct file *filp) struct vc_data *vc = vc_cons[currcons].d; /* Still being freed */ - if (vc->vc_tty) { + if (vc->port.tty) { release_console_sem(); return -ERESTARTSYS; } tty->driver_data = vc; - vc->vc_tty = tty; + vc->port.tty = tty; if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; @@ -2840,7 +2840,7 @@ static void con_shutdown(struct tty_struct *tty) struct vc_data *vc = tty->driver_data; BUG_ON(vc == NULL); acquire_console_sem(); - vc->vc_tty = NULL; + vc->port.tty = NULL; release_console_sem(); tty_shutdown(tty); } diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index cb19dbc..72dcfb2 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -1369,7 +1369,7 @@ void vc_SAK(struct work_struct *work) acquire_console_sem(); vc = vc_con->d; if (vc) { - tty = vc->vc_tty; + tty = vc->port.tty; /* * SAK should also work in all raw modes and reset * them properly. diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 25bf67f..7f0c329 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -58,7 +58,6 @@ struct vc_data { /* VT terminal data */ unsigned int vc_state; /* Escape sequence parser state */ unsigned int vc_npar,vc_par[NPAR]; /* Parameters of current escape sequence */ - struct tty_struct *vc_tty; /* TTY we are attached to */ /* data for manual vt switching */ struct vt_mode vt_mode; struct pid *vt_pid; -- cgit v0.10.2 From 61cd8a21d8a9fb4b11111270cf2d3aa919c20624 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:57 +0200 Subject: serial: Change the wait for carrier locking We want to push the lock/unlock into the helper functions so that we can prepare to move to using the tty_port helper. The expansion initially comes out a bit ugly but its worth the temporary expansion IMHO just so we can produce a nice testable series of changes. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 570dca2..424b1c7 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1272,6 +1272,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) struct uart_state *state = tty->driver_data; struct tty_port *port; struct uart_port *uport; + unsigned long flags; BUG_ON(!kernel_locked()); @@ -1284,9 +1285,12 @@ static void uart_close(struct tty_struct *tty, struct file *filp) pr_debug("uart_close(%d) called\n", uport->line); mutex_lock(&port->mutex); + spin_lock_irqsave(&port->lock, flags); - if (tty_hung_up_p(filp)) + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); goto done; + } if ((tty->count == 1) && (port->count != 1)) { /* @@ -1305,8 +1309,10 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty->name, port->count); port->count = 0; } - if (port->count) + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); goto done; + } /* * Now we wait for the transmit buffer to clear; and we notify @@ -1314,6 +1320,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * setting tty->closing. */ tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait)); @@ -1340,20 +1347,26 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); - tty->closing = 0; tty_port_tty_set(port, NULL); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); if (port->close_delay) msleep_interruptible(port->close_delay); + spin_lock_irqsave(&port->lock, flags); } else if (!uart_console(uport)) { + spin_unlock_irqrestore(&port->lock, flags); uart_change_pm(state, 3); + spin_lock_irqsave(&port->lock, flags); } /* * Wake up anyone trying to open this port. */ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); wake_up_interruptible(&port->open_wait); done: @@ -1429,6 +1442,7 @@ static void uart_hangup(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct tty_port *port = &state->port; + unsigned long flags; BUG_ON(!kernel_locked()); pr_debug("uart_hangup(%d)\n", state->uart_port->line); @@ -1437,8 +1451,10 @@ static void uart_hangup(struct tty_struct *tty) if (port->flags & ASYNC_NORMAL_ACTIVE) { uart_flush_buffer(tty); uart_shutdown(tty, state); + spin_lock_irqsave(&port->lock, flags); port->count = 0; clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); tty_port_tty_set(port, NULL); wake_up_interruptible(&port->open_wait); wake_up_interruptible(&port->delta_msr_wait); @@ -1496,9 +1512,13 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; unsigned int mctrl; + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count--; port->blocked_open++; - port->count--; + spin_unlock_irqrestore(&port->lock, flags); add_wait_queue(&port->open_wait, &wait); while (1) { @@ -1535,23 +1555,26 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * not set RTS here - we want to make sure we catch * the data from the modem. */ - if (port->tty->termios->c_cflag & CBAUD) + if (port->tty->termios->c_cflag & CBAUD) { + mutex_lock(&port->mutex); uart_set_mctrl(uport, TIOCM_DTR); + mutex_unlock(&port->mutex); + } /* * and wait for the carrier to indicate that the * modem is ready for us. */ + mutex_lock(&port->mutex); spin_lock_irq(&uport->lock); uport->ops->enable_ms(uport); mctrl = uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); + mutex_unlock(&port->mutex); if (mctrl & TIOCM_CAR) break; - mutex_unlock(&port->mutex); schedule(); - mutex_lock(&port->mutex); if (signal_pending(current)) break; @@ -1559,8 +1582,11 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) set_current_state(TASK_RUNNING); remove_wait_queue(&port->open_wait, &wait); - port->count++; + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; port->blocked_open--; + spin_unlock_irqrestore(&port->lock, flags); if (signal_pending(current)) return -ERESTARTSYS; @@ -1677,9 +1703,9 @@ static int uart_open(struct tty_struct *tty, struct file *filp) /* * If we succeeded, wait until the port is ready. */ + mutex_unlock(&port->mutex); if (retval == 0) retval = uart_block_til_ready(filp, state); - mutex_unlock(&port->mutex); /* * If this is the first open to succeed, adjust things to suit. -- cgit v0.10.2 From de0c8cb314cc737c47a00de33cd6246accf94192 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:58 +0200 Subject: serial: add port helpers We can make this the same as the ones that will be needed by the tty_port helper logic that we want to move to but still call them from the existing code base. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 424b1c7..2379045 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1501,6 +1501,34 @@ static void uart_update_termios(struct tty_struct *tty, } } +static int uart_carrier_raised(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + int mctrl; + mutex_lock(&port->mutex); + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + mutex_unlock(&port->mutex); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} + +static void uart_dtr_rts(struct tty_port *port, int onoff) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + mutex_lock(&port->mutex); + if (onoff) + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + mutex_unlock(&port->mutex); +} + /* * Block the open until the port is ready. We must be called with * the per-port semaphore held. @@ -1509,9 +1537,7 @@ static int uart_block_til_ready(struct file *filp, struct uart_state *state) { DECLARE_WAITQUEUE(wait, current); - struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; - unsigned int mctrl; unsigned long flags; spin_lock_irqsave(&port->lock, flags); @@ -1555,23 +1581,14 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * not set RTS here - we want to make sure we catch * the data from the modem. */ - if (port->tty->termios->c_cflag & CBAUD) { - mutex_lock(&port->mutex); - uart_set_mctrl(uport, TIOCM_DTR); - mutex_unlock(&port->mutex); - } + if (port->tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); /* * and wait for the carrier to indicate that the * modem is ready for us. */ - mutex_lock(&port->mutex); - spin_lock_irq(&uport->lock); - uport->ops->enable_ms(uport); - mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - mutex_unlock(&port->mutex); - if (mctrl & TIOCM_CAR) + if (tty_port_carrier_raised(port)) break; schedule(); @@ -2349,6 +2366,11 @@ static const struct tty_operations uart_ops = { #endif }; +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, +}; + /** * uart_register_driver - register a driver with the uart core layer * @drv: low level driver structure @@ -2405,6 +2427,7 @@ int uart_register_driver(struct uart_driver *drv) struct tty_port *port = &state->port; tty_port_init(port); + port->ops = &uart_port_ops; port->close_delay = 500; /* .5 seconds */ port->closing_wait = 30000; /* 30 seconds */ tasklet_init(&state->tlet, uart_tasklet_action, -- cgit v0.10.2 From 24fcc7c8cd0fcabcf37d455abe3501b3196fcf64 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:52:59 +0200 Subject: serial: trim locking on the helpers The port mutex protects port->tty, but these paths never need to walk from port->tty. They do need the low level lock as the API expects that but they already also take it. Thus we can drop the extra mutex lock calls here. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 2379045..0603e0d 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1506,12 +1506,10 @@ static int uart_carrier_raised(struct tty_port *port) struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; int mctrl; - mutex_lock(&port->mutex); spin_lock_irq(&uport->lock); uport->ops->enable_ms(uport); mctrl = uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); - mutex_unlock(&port->mutex); if (mctrl & TIOCM_CAR) return 1; return 0; @@ -1521,12 +1519,11 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) { struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; - mutex_lock(&port->mutex); + if (onoff) uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); else uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - mutex_unlock(&port->mutex); } /* -- cgit v0.10.2 From 74c2107759dc6efaa1b9127014be58a742a1e7ac Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Jun 2010 22:53:00 +0200 Subject: serial: Use block_til_ready helper Our code now rather closely resembles the helper, so switch to it. Signed-off-by: Alan Cox Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 0603e0d..a55751a 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1526,91 +1526,6 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } -/* - * Block the open until the port is ready. We must be called with - * the per-port semaphore held. - */ -static int -uart_block_til_ready(struct file *filp, struct uart_state *state) -{ - DECLARE_WAITQUEUE(wait, current); - struct tty_port *port = &state->port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->count--; - port->blocked_open++; - spin_unlock_irqrestore(&port->lock, flags); - - add_wait_queue(&port->open_wait, &wait); - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - - /* - * If we have been hung up, tell userspace/restart open. - */ - if (tty_hung_up_p(filp) || port->tty == NULL) - break; - - /* - * If the port has been closed, tell userspace/restart open. - */ - if (!(port->flags & ASYNC_INITIALIZED)) - break; - - /* - * If non-blocking mode is set, or CLOCAL mode is set, - * we don't want to wait for the modem status lines to - * indicate that the port is ready. - * - * Also, if the port is not enabled/configured, we want - * to allow the open to succeed here. Note that we will - * have set TTY_IO_ERROR for a non-existant port. - */ - if ((filp->f_flags & O_NONBLOCK) || - (port->tty->termios->c_cflag & CLOCAL) || - (port->tty->flags & (1 << TTY_IO_ERROR))) - break; - - /* - * Set DTR to allow modem to know we're waiting. Do - * not set RTS here - we want to make sure we catch - * the data from the modem. - */ - if (port->tty->termios->c_cflag & CBAUD) - tty_port_raise_dtr_rts(port); - - /* - * and wait for the carrier to indicate that the - * modem is ready for us. - */ - if (tty_port_carrier_raised(port)) - break; - - schedule(); - - if (signal_pending(current)) - break; - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - spin_unlock_irqrestore(&port->lock, flags); - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (!port->tty || tty_hung_up_p(filp)) - return -EAGAIN; - - return 0; -} - static struct uart_state *uart_get(struct uart_driver *drv, int line) { struct uart_state *state; @@ -1719,7 +1634,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) */ mutex_unlock(&port->mutex); if (retval == 0) - retval = uart_block_til_ready(filp, state); + retval = tty_port_block_til_ready(port, tty, filp); /* * If this is the first open to succeed, adjust things to suit. -- cgit v0.10.2 From 3f582b8c11014e4ce310d9839fb335164195333f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 29 Jun 2010 22:31:40 +0200 Subject: serial: fix termios settings in open Move termios initialization in open into uart_dtr_rts to make sure it always gets called when necessary. Based on a suggestion from Alan Cox. Alan writes: Ok this sort of makes sense. Something isn't getting initialised and both getty and minicom will do a termios set which is sorting it out. This is occurring because the generic block_til_ready sets ASYNCB_NORMAL_ACTIVE so the termios updating gets skipped. This patch should cure it and then we can think about doing it more elegantly by getting the serial layer to use tty_port_open, kfifo and the like and removing the tons of repeated crap in all the drivers. Signed-off-by: Arnd Bergmann Reported-by: Tony Luck Cc: Alan Cox Cc: Tony Luck Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index a55751a..3d2acc2 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1520,8 +1520,16 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; - if (onoff) + if (onoff) { uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + + /* + * If this is the first open to succeed, + * adjust things to suit. + */ + if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) + uart_update_termios(port->tty, state); + } else uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } @@ -1636,15 +1644,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp) if (retval == 0) retval = tty_port_block_til_ready(port, tty, filp); - /* - * If this is the first open to succeed, adjust things to suit. - */ - if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) { - set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - - uart_update_termios(tty, state); - } - fail: return retval; } -- cgit v0.10.2 From ec79d6056de58511d8e46d9ae59d3878f958dc3e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:01 +0200 Subject: tty: replace BKL with a new tty_lock As a preparation for replacing the big kernel lock in the TTY layer, wrap all the callers in new macros tty_lock, tty_lock_nested and tty_unlock. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 4f8d60c..1b21a7a 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1072,7 +1072,7 @@ static int get_serial_info(struct async_struct * info, if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); + tty_lock(); tmp.type = state->type; tmp.line = state->line; tmp.port = state->port; @@ -1083,7 +1083,7 @@ static int get_serial_info(struct async_struct * info, tmp.close_delay = state->close_delay; tmp.closing_wait = state->closing_wait; tmp.custom_divisor = state->custom_divisor; - unlock_kernel(); + tty_unlock(); if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) return -EFAULT; return 0; @@ -1100,14 +1100,14 @@ static int set_serial_info(struct async_struct * info, if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) return -EFAULT; - lock_kernel(); + tty_lock(); state = info->state; old_state = *state; change_irq = new_serial.irq != state->irq; change_port = (new_serial.port != state->port); if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) { - unlock_kernel(); + tty_unlock(); return -EINVAL; } @@ -1127,7 +1127,7 @@ static int set_serial_info(struct async_struct * info, } if (new_serial.baud_base < 9600) { - unlock_kernel(); + tty_unlock(); return -EINVAL; } @@ -1163,7 +1163,7 @@ check_and_exit: } } else retval = startup(info); - unlock_kernel(); + tty_unlock(); return retval; } @@ -1538,7 +1538,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) orig_jiffies = jiffies; - lock_kernel(); + tty_lock_nested(); /* tty_wait_until_sent is called from lots of places */ /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1579,7 +1579,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) break; } __set_current_state(TASK_RUNNING); - unlock_kernel(); + tty_unlock(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c index 555cd93..d5fa113 100644 --- a/drivers/char/briq_panel.c +++ b/drivers/char/briq_panel.c @@ -67,15 +67,15 @@ static void set_led(char state) static int briq_panel_open(struct inode *ino, struct file *filep) { - lock_kernel(); + tty_lock(); /* enforce single access, vfd_is_open is protected by BKL */ if (vfd_is_open) { - unlock_kernel(); + tty_unlock(); return -EBUSY; } vfd_is_open = 1; - unlock_kernel(); + tty_unlock(); return 0; } diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index c68118e..47d3228 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -598,18 +598,18 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, return -EFAULT; } - lock_kernel(); + tty_lock(); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - unlock_kernel(); + tty_unlock(); return -EIO; } n_hdlc = tty2n_hdlc (tty); if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || tty != n_hdlc->tty) { - unlock_kernel(); + tty_unlock(); return 0; } @@ -619,13 +619,13 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, /* no data */ if (file->f_flags & O_NONBLOCK) { - unlock_kernel(); + tty_unlock(); return -EAGAIN; } interruptible_sleep_on (&tty->read_wait); if (signal_pending(current)) { - unlock_kernel(); + tty_unlock(); return -EINTR; } } @@ -648,7 +648,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, kfree(rbuf); else n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); - unlock_kernel(); + tty_unlock(); return ret; } /* end of n_hdlc_tty_read() */ @@ -691,7 +691,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, count = maxframe; } - lock_kernel(); + tty_lock(); add_wait_queue(&tty->write_wait, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } - unlock_kernel(); + tty_unlock(); return error; } /* end of n_hdlc_tty_write() */ diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index c1d8b54..f4bd259 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1067,7 +1067,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, TRACE_L("read()"); - lock_kernel(); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1109,7 +1109,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, } ret = -EPERM; unlock: - unlock_kernel(); + tty_unlock(); return ret; } @@ -1158,7 +1158,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, pHeader->locks = 0; pHeader->owner = NULL; - lock_kernel(); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1177,7 +1177,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, add_tx_queue(pInfo, pHeader); trigger_transmit(pInfo); - unlock_kernel(); + tty_unlock(); return 0; } diff --git a/drivers/char/pty.c b/drivers/char/pty.c index b640ef2..622e21c 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -692,9 +692,9 @@ static int ptmx_open(struct inode *inode, struct file *filp) { int ret; - lock_kernel(); + tty_lock(); ret = __ptmx_open(inode, filp); - unlock_kernel(); + tty_unlock(); return ret; } diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 6e79340..85211a3 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -313,7 +313,7 @@ int paste_selection(struct tty_struct *tty) struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); - lock_kernel(); + tty_lock_nested(); /* always called with BTM from vt_ioctl */ acquire_console_sem(); poke_blanked_console(); @@ -338,6 +338,6 @@ int paste_selection(struct tty_struct *tty) __set_current_state(TASK_RUNNING); tty_ldisc_deref(ld); - unlock_kernel(); + tty_unlock(); return 0; } diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index ecbe479..90b3ec0 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1505,7 +1505,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ #endif - lock_kernel(); + tty_lock(); switch (cmd) { case CYGETMON: @@ -1561,7 +1561,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, default: ret_val = -ENOIOCTLCMD; } - unlock_kernel(); + tty_unlock(); #ifdef SERIAL_DEBUG_OTHER printk("cy_ioctl done\n"); diff --git a/drivers/char/sx.c b/drivers/char/sx.c index a81ec4f..5b24db4 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1699,7 +1699,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, if (!capable(CAP_SYS_RAWIO)) return -EPERM; - lock_kernel(); + tty_lock(); sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg); @@ -1848,7 +1848,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, break; } out: - unlock_kernel(); + tty_unlock(); func_exit(); return rc; } @@ -1859,7 +1859,7 @@ static int sx_break(struct tty_struct *tty, int flag) int rv; func_enter(); - lock_kernel(); + tty_lock(); if (flag) rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK); @@ -1868,7 +1868,7 @@ static int sx_break(struct tty_struct *tty, int flag) if (rv != 1) printk(KERN_ERR "sx: couldn't send break (%x).\n", read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat))); - unlock_kernel(); + tty_unlock(); func_exit(); return 0; } @@ -1909,7 +1909,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, /* func_enter2(); */ rc = 0; - lock_kernel(); + tty_lock(); switch (cmd) { case TIOCGSERIAL: rc = gs_getserial(&port->gs, argp); @@ -1921,7 +1921,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, rc = -ENOIOCTLCMD; break; } - unlock_kernel(); + tty_unlock(); /* func_exit(); */ return rc; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 507441a..5ee9081 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -149,6 +149,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd, #else #define tty_compat_ioctl NULL #endif +static int __tty_fasync(int fd, struct file *filp, int on); static int tty_fasync(int fd, struct file *filp, int on); static void release_tty(struct tty_struct *tty, int idx); static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); @@ -483,7 +484,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * remains intact. * * Locking: - * BKL + * BTM * redirect lock for undoing redirection * file list lock for manipulating list of ttys * tty_ldisc_lock from called functions @@ -513,8 +514,11 @@ static void do_tty_hangup(struct work_struct *work) } spin_unlock(&redirect_lock); - /* inuse_filps is protected by the single kernel lock */ - lock_kernel(); + /* inuse_filps is protected by the single tty lock, + this really needs to change if we want to flush the + workqueue with the lock held */ + tty_lock_nested(); /* called with BTM held from pty_close and + others */ check_tty_count(tty, "do_tty_hangup"); file_list_lock(); @@ -525,7 +529,7 @@ static void do_tty_hangup(struct work_struct *work) if (filp->f_op->write != tty_write) continue; closecount++; - tty_fasync(-1, filp, 0); /* can't block */ + __tty_fasync(-1, filp, 0); /* can't block */ filp->f_op = &hung_up_tty_fops; } file_list_unlock(); @@ -594,7 +598,7 @@ static void do_tty_hangup(struct work_struct *work) */ set_bit(TTY_HUPPED, &tty->flags); tty_ldisc_enable(tty); - unlock_kernel(); + tty_unlock(); if (f) fput(f); } @@ -696,7 +700,8 @@ static void session_clear_tty(struct pid *session) * exiting; it is 0 if called by the ioctl TIOCNOTTY. * * Locking: - * BKL is taken for hysterical raisins + * BTM is taken for hysterical raisins, and held when + * called from no_tty(). * tty_mutex is taken to protect tty * ->siglock is taken to protect ->signal/->sighand * tasklist_lock is taken to walk process list for sessions @@ -714,10 +719,10 @@ void disassociate_ctty(int on_exit) tty = get_current_tty(); if (tty) { tty_pgrp = get_pid(tty->pgrp); - lock_kernel(); + tty_lock_nested(); /* see above */ if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) tty_vhangup(tty); - unlock_kernel(); + tty_unlock(); tty_kref_put(tty); } else if (on_exit) { struct pid *old_pgrp; @@ -774,9 +779,9 @@ void disassociate_ctty(int on_exit) void no_tty(void) { struct task_struct *tsk = current; - lock_kernel(); + tty_lock(); disassociate_ctty(0); - unlock_kernel(); + tty_unlock(); proc_clear_tty(tsk); } @@ -1013,19 +1018,19 @@ out: * We don't put it into the syslog queue right now maybe in the future if * really needed. * - * We must still hold the BKL and test the CLOSING flag for the moment. + * We must still hold the BTM and test the CLOSING flag for the moment. */ void tty_write_message(struct tty_struct *tty, char *msg) { if (tty) { mutex_lock(&tty->atomic_write_lock); - lock_kernel(); + tty_lock(); if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { - unlock_kernel(); + tty_unlock(); tty->ops->write(tty, msg, strlen(msg)); } else - unlock_kernel(); + tty_unlock(); tty_write_unlock(tty); } return; @@ -1208,18 +1213,18 @@ static int tty_driver_install_tty(struct tty_driver *driver, int ret; if (driver->ops->install) { - lock_kernel(); + tty_lock_nested(); /* already called with BTM held */ ret = driver->ops->install(driver, tty); - unlock_kernel(); + tty_unlock(); return ret; } if (tty_init_termios(tty) == 0) { - lock_kernel(); + tty_lock_nested(); tty_driver_kref_get(driver); tty->count++; driver->ttys[idx] = tty; - unlock_kernel(); + tty_unlock(); return 0; } return -ENOMEM; @@ -1312,14 +1317,15 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, struct tty_struct *tty; int retval; - lock_kernel(); + tty_lock_nested(); /* always called with tty lock held already */ + /* Check if pty master is being opened multiple times */ if (driver->subtype == PTY_TYPE_MASTER && (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { - unlock_kernel(); + tty_unlock(); return ERR_PTR(-EIO); } - unlock_kernel(); + tty_unlock(); /* * First time open is complex, especially for PTY devices. @@ -1363,9 +1369,9 @@ release_mem_out: if (printk_ratelimit()) printk(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); - lock_kernel(); + tty_lock_nested(); release_tty(tty, idx); - unlock_kernel(); + tty_unlock(); return ERR_PTR(retval); } @@ -1512,10 +1518,10 @@ int tty_release(struct inode *inode, struct file *filp) if (tty_paranoia_check(tty, inode, "tty_release_dev")) return 0; - lock_kernel(); + tty_lock(); check_tty_count(tty, "tty_release_dev"); - tty_fasync(-1, filp, 0); + __tty_fasync(-1, filp, 0); idx = tty->index; pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY && @@ -1527,18 +1533,18 @@ int tty_release(struct inode *inode, struct file *filp) if (idx < 0 || idx >= tty->driver->num) { printk(KERN_DEBUG "tty_release_dev: bad idx when trying to " "free (%s)\n", tty->name); - unlock_kernel(); + tty_unlock(); return 0; } if (!devpts) { if (tty != tty->driver->ttys[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty " "for (%s)\n", idx, tty->name); return 0; } if (tty->termios != tty->driver->termios[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios " "for (%s)\n", idx, tty->name); @@ -1556,21 +1562,21 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->driver->other && !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) { if (o_tty != tty->driver->other->ttys[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: other->table[%d] " "not o_tty for (%s)\n", idx, tty->name); return 0 ; } if (o_tty->termios != tty->driver->other->termios[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: other->termios[%d] " "not o_termios for (%s)\n", idx, tty->name); return 0; } if (o_tty->link != tty) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n"); return 0; } @@ -1579,7 +1585,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->ops->close) tty->ops->close(tty, filp); - unlock_kernel(); + tty_unlock(); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1602,7 +1608,7 @@ int tty_release(struct inode *inode, struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1633,7 +1639,7 @@ int tty_release(struct inode *inode, struct file *filp) printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue " "active!\n", tty_name(tty, buf)); - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); schedule(); } @@ -1698,7 +1704,7 @@ int tty_release(struct inode *inode, struct file *filp) /* check whether both sides are closing ... */ if (!tty_closing || (o_tty && !o_tty_closing)) { - unlock_kernel(); + tty_unlock(); return 0; } @@ -1718,7 +1724,7 @@ int tty_release(struct inode *inode, struct file *filp) /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); - unlock_kernel(); + tty_unlock(); return 0; } @@ -1760,12 +1766,12 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); if (device == MKDEV(TTYAUX_MAJOR, 0)) { tty = get_current_tty(); if (!tty) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENXIO; } @@ -1797,14 +1803,14 @@ retry_open: goto got_driver; } } - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENODEV; } driver = get_tty_driver(device, &index); if (!driver) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENODEV; } @@ -1814,7 +1820,7 @@ got_driver: tty = tty_driver_lookup_tty(driver, inode, index); if (IS_ERR(tty)) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return PTR_ERR(tty); } @@ -1830,7 +1836,7 @@ got_driver: mutex_unlock(&tty_mutex); tty_driver_kref_put(driver); if (IS_ERR(tty)) { - unlock_kernel(); + tty_unlock(); return PTR_ERR(tty); } @@ -1862,11 +1868,11 @@ got_driver: #endif tty_release(inode, filp); if (retval != -ERESTARTSYS) { - unlock_kernel(); + tty_unlock(); return retval; } if (signal_pending(current)) { - unlock_kernel(); + tty_unlock(); return retval; } schedule(); @@ -1875,14 +1881,14 @@ got_driver: */ if (filp->f_op == &hung_up_tty_fops) filp->f_op = &tty_fops; - unlock_kernel(); + tty_unlock(); goto retry_open; } - unlock_kernel(); + tty_unlock(); mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -1890,7 +1896,7 @@ got_driver: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return 0; } @@ -1926,13 +1932,12 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait) return ret; } -static int tty_fasync(int fd, struct file *filp, int on) +static int __tty_fasync(int fd, struct file *filp, int on) { struct tty_struct *tty; unsigned long flags; int retval = 0; - lock_kernel(); tty = (struct tty_struct *)filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync")) goto out; @@ -1966,7 +1971,15 @@ static int tty_fasync(int fd, struct file *filp, int on) } retval = 0; out: - unlock_kernel(); + return retval; +} + +static int tty_fasync(int fd, struct file *filp, int on) +{ + int retval; + tty_lock(); + retval = __tty_fasync(fd, filp, on); + tty_unlock(); return retval; } diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 500e740..97681ff 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -440,6 +440,8 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) * * A helper opening method. Also a convenient debugging and check * point. + * + * Locking: always called with BTM already held. */ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) @@ -447,10 +449,10 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); if (ld->ops->open) { int ret; - /* BKL here locks verus a hangup event */ - lock_kernel(); + /* BTM here locks versus a hangup event */ + tty_lock_nested(); /* always held here already */ ret = ld->ops->open(tty); - unlock_kernel(); + tty_unlock(); return ret; } return 0; @@ -553,7 +555,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); - lock_kernel(); + tty_lock(); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -567,12 +569,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { - unlock_kernel(); + tty_unlock(); tty_ldisc_put(new_ldisc); return 0; } - unlock_kernel(); + tty_unlock(); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -594,7 +596,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) mutex_lock(&tty->ldisc_mutex); } - lock_kernel(); + tty_lock(); set_bit(TTY_LDISC_CHANGING, &tty->flags); @@ -607,7 +609,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) o_ldisc = tty->ldisc; - unlock_kernel(); + tty_unlock(); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -633,14 +635,14 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); mutex_lock(&tty->ldisc_mutex); - lock_kernel(); + tty_lock(); if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); - unlock_kernel(); + tty_unlock(); return -EIO; } @@ -682,7 +684,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (o_work) schedule_delayed_work(&o_tty->buf.work, 1); mutex_unlock(&tty->ldisc_mutex); - unlock_kernel(); + tty_unlock(); return retval; } diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index c1791a6..bcce46c 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -463,10 +463,10 @@ vcs_open(struct inode *inode, struct file *filp) unsigned int currcons = iminor(inode) & 127; int ret = 0; - lock_kernel(); + tty_lock(); if(currcons && !vc_cons_allocated(currcons-1)) ret = -ENXIO; - unlock_kernel(); + tty_unlock(); return ret; } diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 72dcfb2..cf87c53 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -509,7 +509,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, console = vc->vc_num; - lock_kernel(); + tty_lock(); if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; @@ -1336,7 +1336,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENOIOCTLCMD; } out: - unlock_kernel(); + tty_unlock(); return ret; eperm: ret = -EPERM; @@ -1503,7 +1503,7 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file, console = vc->vc_num; - lock_kernel(); + tty_lock(); if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; @@ -1571,11 +1571,11 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file, goto fallback; } out: - unlock_kernel(); + tty_unlock(); return ret; fallback: - unlock_kernel(); + tty_unlock(); return vt_ioctl(tty, file, cmd, arg); } diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 768612f..16f5f2f 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1705,7 +1705,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) printk("jiff=%lu...", jiffies); #endif - lock_kernel(); + tty_lock_nested(); /* always held already since we come from ->close */ /* We go through the loop at least once because we can't tell * exactly when the last character exits the shifter. There can * be at least two characters waiting to be sent after the buffers @@ -1734,7 +1734,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) bdp--; } while (bdp->status & BD_SC_READY); current->state = TASK_RUNNING; - unlock_kernel(); + tty_unlock(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 3062644..f848e18 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -3935,7 +3935,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) */ - lock_kernel(); + tty_lock_nested(); /* locked already when coming from close */ orig_jiffies = jiffies; while (info->xmit.head != info->xmit.tail || /* More in send queue */ (*info->ostatusadr & 0x007f) || /* more in FIFO */ @@ -3952,7 +3952,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) curr_time_usec - info->last_tx_active_usec; } set_current_state(TASK_RUNNING); - unlock_kernel(); + tty_unlock(); } /* diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 3d2acc2..851d7c2 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1274,7 +1274,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) struct uart_port *uport; unsigned long flags; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); if (!state) return; @@ -1382,7 +1382,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) if (port->type == PORT_UNKNOWN || port->fifosize == 0) return; - lock_kernel(); + tty_lock_nested(); /* already locked when coming from close */ /* * Set the check interval to be 1/5 of the estimated time to @@ -1429,7 +1429,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) break; } set_current_state(TASK_RUNNING); /* might not be needed */ - unlock_kernel(); + tty_unlock(); } /* @@ -1444,7 +1444,7 @@ static void uart_hangup(struct tty_struct *tty) struct tty_port *port = &state->port; unsigned long flags; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); pr_debug("uart_hangup(%d)\n", state->uart_port->line); mutex_lock(&port->mutex); @@ -1578,7 +1578,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) struct tty_port *port; int retval, line = tty->index; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); pr_debug("uart_open(%d) called\n", line); /* diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 182dd6f..7197005 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1108,7 +1108,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) charmap += 4 * cmapsz; #endif - unlock_kernel(); + tty_unlock(); spin_lock_irq(&vga_lock); /* First, the Sequencer */ vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -1192,7 +1192,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0); } spin_unlock_irq(&vga_lock); - lock_kernel(); + tty_lock(); return 0; } diff --git a/include/linux/tty.h b/include/linux/tty.h index 2df60e4..6ead6b6 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -576,5 +577,35 @@ extern int vt_ioctl(struct tty_struct *tty, struct file *file, extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); +/* functions for preparation of BKL removal */ + +/* + * tty_lock_nested get the tty_lock while potentially holding it + * + * The Big TTY Mutex is a recursive lock, meaning you can take it + * from a thread that is already holding it. + * This is bad for a number of reasons, so tty_lock_nested should + * really be used as rarely as possible. If a code location can + * be shown to never get called with this held already, it should + * use tty_lock() instead. + */ +static inline void __lockfunc tty_lock_nested(void) __acquires(kernel_lock) +{ + lock_kernel(); +} +static inline void tty_lock(void) __acquires(kernel_lock) +{ +#ifdef CONFIG_LOCK_KERNEL + /* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */ + WARN_ON(kernel_locked()); +#endif + lock_kernel(); +} +static inline void tty_unlock(void) __releases(kernel_lock) +{ + unlock_kernel(); +} +#define tty_locked() (kernel_locked()) + #endif /* __KERNEL__ */ #endif -- cgit v0.10.2 From 64ba3dc3143d94bbe935722aa17fa516b232bc83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:02 +0200 Subject: tty: never hold BTM while getting tty_mutex tty_mutex is never taken with the BTM held, except for two corner cases that are worked around here. We give up the BTM before calling tty_release() in the error path of tty_open(). Similarly, we reorder the locking in ptmx_open() to get tty_mutex before the BTM. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 622e21c..de22ea9 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -647,7 +647,7 @@ static const struct tty_operations pty_unix98_ops = { * allocated_ptys_lock handles the list of free pty numbers */ -static int __ptmx_open(struct inode *inode, struct file *filp) +static int ptmx_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; int retval; @@ -656,11 +656,14 @@ static int __ptmx_open(struct inode *inode, struct file *filp) nonseekable_open(inode, filp); /* find a device that is not in use. */ + tty_lock(); index = devpts_new_index(inode); + tty_unlock(); if (index < 0) return index; mutex_lock(&tty_mutex); + tty_lock(); tty = tty_init_dev(ptm_driver, index, 1); mutex_unlock(&tty_mutex); @@ -678,24 +681,19 @@ static int __ptmx_open(struct inode *inode, struct file *filp) goto out1; retval = ptm_driver->ops->open(tty, filp); - if (!retval) - return 0; + if (retval) + goto out2; out1: + tty_unlock(); + return retval; +out2: + tty_unlock(); tty_release(inode, filp); return retval; out: devpts_kill_index(inode, index); - return retval; -} - -static int ptmx_open(struct inode *inode, struct file *filp) -{ - int ret; - - tty_lock(); - ret = __ptmx_open(inode, filp); tty_unlock(); - return ret; + return retval; } static struct file_operations ptmx_fops; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 5ee9081..bb22cf4 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1866,19 +1866,19 @@ got_driver: printk(KERN_DEBUG "error %d in opening %s...", retval, tty->name); #endif + tty_unlock(); /* need to call tty_release without BTM */ tty_release(inode, filp); - if (retval != -ERESTARTSYS) { - tty_unlock(); + if (retval != -ERESTARTSYS) return retval; - } - if (signal_pending(current)) { - tty_unlock(); + + if (signal_pending(current)) return retval; - } + schedule(); /* * Need to reset f_op in case a hangup happened. */ + tty_lock(); if (filp->f_op == &hung_up_tty_fops) filp->f_op = &tty_fops; tty_unlock(); -- cgit v0.10.2 From 83ceb67d7dfe6aedf0e47dd6887b7b3c753542b2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:03 +0200 Subject: tty: fix console_sem lock order vgacon_do_font_op releases and reacquires the BTM while holding console_sem. This violates the rule that BTM has to be the outer lock whenever we hold both. There does not seem to be any reason to give up the BTM here, so just stop doing that. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 7197005..54e32c5 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1108,7 +1108,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) charmap += 4 * cmapsz; #endif - tty_unlock(); spin_lock_irq(&vga_lock); /* First, the Sequencer */ vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -1192,7 +1191,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0); } spin_unlock_irq(&vga_lock); - tty_lock(); return 0; } -- cgit v0.10.2 From 4e608671674b62e97166f903830d5553e37970e8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:04 +0200 Subject: cdc-acm: remove dead code The wait_event_interruptible_timeout in acm_port_down is never reached. Remove it to avoid possible deadlocks with the big tty mutex if someone were to start using the blocking version of acm_port_down. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 89d260d..1833b3a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -636,19 +636,13 @@ static void acm_tty_unregister(struct acm *acm) static int acm_tty_chars_in_buffer(struct tty_struct *tty); -static void acm_port_down(struct acm *acm, int drain) +static void acm_port_down(struct acm *acm) { int i, nr = acm->rx_buflimit; mutex_lock(&open_mutex); if (acm->dev) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); - /* try letting the last writes drain naturally */ - if (drain) { - wait_event_interruptible_timeout(acm->drain_wait, - (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, - ACM_CLOSE_TIMEOUT * HZ); - } usb_kill_urb(acm->ctrlurb); for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); @@ -664,7 +658,7 @@ static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; tty_port_hangup(&acm->port); - acm_port_down(acm, 0); + acm_port_down(acm); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) @@ -685,7 +679,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&open_mutex); return; } - acm_port_down(acm, 0); + acm_port_down(acm); tty_port_close_end(&acm->port, tty); tty_port_tty_set(&acm->port, NULL); } -- cgit v0.10.2 From be1bc2889a4db4961ef69f47fb471ecae9f23ade Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:05 +0200 Subject: tty: introduce wait_event_interruptible_tty Calling wait_event_interruptible implicitly releases the BKL when it sleeps, but we need to do this explcitly when we have converted it to a mutex. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 51acfe3..27aad94 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1607,7 +1607,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->port.close_wait, + wait_event_interruptible_tty(info->port.close_wait, !(info->port.flags & ASYNC_CLOSING)); return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 5e9a81d..be28391 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -954,7 +954,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l * order of opens and closes may not be preserved across shared * memory, so we must wait until it is complete. */ - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) { return -ERESTARTSYS; @@ -989,7 +989,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l set_bit(ST_OPENING, &portp->state); spin_unlock_irqrestore(&brd_lock, flags); - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_OPENING, &portp->state)); if (signal_pending(current)) rc = -ERESTARTSYS; @@ -1020,7 +1020,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned * occurs on this port. */ if (wait) { - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) { return -ERESTARTSYS; @@ -1052,7 +1052,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned * to come back. */ rc = 0; - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) rc = -ERESTARTSYS; @@ -1073,6 +1073,10 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) { + /* + * no need for wait_event_tty because clearing ST_CMDING cannot block + * on BTM + */ wait_event_interruptible(portp->raw_wait, !test_bit(ST_CMDING, &portp->state)); if (signal_pending(current)) diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index f4bd259..a98290d 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1079,7 +1079,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, goto unlock; } /* block until there is a message: */ - wait_event_interruptible(pInfo->read_wait, + wait_event_interruptible_tty(pInfo->read_wait, (pMsg = remove_msg(pInfo, pClient))); } diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index a3bd1d0..35eb3040 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -231,7 +231,7 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - wait_event_interruptible(port->close_wait, + wait_event_interruptible_tty(port->close_wait, !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index cf87c53..2bbeaae 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -133,7 +133,7 @@ static void vt_event_wait(struct vt_event_wait *vw) list_add(&vw->list, &vt_events); spin_unlock_irqrestore(&vt_event_lock, flags); /* Wait for it to pass */ - wait_event_interruptible(vt_event_waitqueue, vw->done); + wait_event_interruptible_tty(vt_event_waitqueue, vw->done); /* Dequeue it */ spin_lock_irqsave(&vt_event_lock, flags); list_del(&vw->list); @@ -1761,10 +1761,13 @@ int vt_move_to_console(unsigned int vt, int alloc) return -EIO; } release_console_sem(); + tty_lock(); if (vt_waitactive(vt + 1)) { pr_debug("Suspend: Can't switch VCs."); + tty_unlock(); return -EINTR; } + tty_unlock(); return prev; } diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index f848e18..94bfb9f 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -3992,7 +3992,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) @@ -4150,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp) */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART return ((info->flags & ASYNC_HUP_NOTIFY) ? diff --git a/include/linux/tty.h b/include/linux/tty.h index 6ead6b6..955d72e 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -607,5 +607,47 @@ static inline void tty_unlock(void) __releases(kernel_lock) } #define tty_locked() (kernel_locked()) +/* + * wait_event_interruptible_tty -- wait for a condition with the tty lock held + * + * The condition we are waiting for might take a long time to + * become true, or might depend on another thread taking the + * BTM. In either case, we need to drop the BTM to guarantee + * forward progress. This is a leftover from the conversion + * from the BKL and should eventually get removed as the BTM + * falls out of use. + * + * Do not use in new code. + */ +#define wait_event_interruptible_tty(wq, condition) \ +({ \ + int __ret = 0; \ + if (!(condition)) { \ + __wait_event_interruptible_tty(wq, condition, __ret); \ + } \ + __ret; \ +}) + +#define __wait_event_interruptible_tty(wq, condition, ret) \ +do { \ + DEFINE_WAIT(__wait); \ + \ + for (;;) { \ + prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + tty_unlock(); \ + schedule(); \ + tty_lock(); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + finish_wait(&wq, &__wait); \ +} while (0) + + #endif /* __KERNEL__ */ #endif -- cgit v0.10.2 From 60af22d2ed490554cc92c8d0fed0b5b9cf687568 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:06 +0200 Subject: tty: reorder ldisc locking We need to release the BTM in paste_selection() when sleeping in tty_ldisc_ref_wait to avoid deadlocks with tty_ldisc_enable. In tty_set_ldisc, we now always grab the BTM before taking the ldisc_mutex in order to avoid AB-BA deadlocks between the two. tty_ldisc_halt potentially blocks on a workqueue function that takes the BTM, so we must release the BTM before calling it. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 85211a3..75889cd 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -319,8 +319,13 @@ int paste_selection(struct tty_struct *tty) poke_blanked_console(); release_console_sem(); - ld = tty_ldisc_ref_wait(tty); - + ld = tty_ldisc_ref(tty); + if (!ld) { + tty_unlock(); + ld = tty_ldisc_ref_wait(tty); + tty_lock(); + } + add_wait_queue(&vc->paste_wait, &wait); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 97681ff..0f49479 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -582,6 +582,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* @@ -591,13 +592,13 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { mutex_unlock(&tty->ldisc_mutex); + tty_unlock(); wait_event(tty_ldisc_wait, test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); + tty_lock(); mutex_lock(&tty->ldisc_mutex); } - tty_lock(); - set_bit(TTY_LDISC_CHANGING, &tty->flags); /* @@ -634,8 +635,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); - mutex_lock(&tty->ldisc_mutex); tty_lock(); + mutex_lock(&tty->ldisc_mutex); if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ @@ -782,7 +783,20 @@ void tty_ldisc_hangup(struct tty_struct *tty) * Avoid racing set_ldisc or tty_ldisc_release */ mutex_lock(&tty->ldisc_mutex); - tty_ldisc_halt(tty); + + /* + * this is like tty_ldisc_halt, but we need to give up + * the BTM before calling cancel_delayed_work_sync, + * which may need to wait for another function taking the BTM + */ + clear_bit(TTY_LDISC, &tty->flags); + tty_unlock(); + cancel_delayed_work_sync(&tty->buf.work); + mutex_unlock(&tty->ldisc_mutex); + + tty_lock(); + mutex_lock(&tty->ldisc_mutex); + /* At this point we have a closed ldisc and we want to reopen it. We could defer this to the next open but it means auditing a lot of other paths so this is @@ -853,8 +867,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * race with the set_ldisc code path. */ + tty_unlock(); tty_ldisc_halt(tty); flush_scheduled_work(); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* -- cgit v0.10.2 From 203652192634c1fce5e79df0a8ff2fabfaefd3ab Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:07 +0200 Subject: tty: untangle locking of wait_until_sent Some wait_until_sent versions require the big tty mutex, others don't and some callers of wait_until_sent already hold it while other don't. That leads to recursive use of the BTM in these functions, which we're trying to get rid of. This turns all cleans up the locking there so that the driver's wait_until_sent function never takes the BTM itself if it is already called with that lock held. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 1b21a7a..8228e61 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1528,6 +1528,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { struct async_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; + int tty_was_locked = tty_locked(); int lsr; if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) @@ -1538,7 +1539,12 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) orig_jiffies = jiffies; - tty_lock_nested(); /* tty_wait_until_sent is called from lots of places */ + /* + * tty_wait_until_sent is called from lots of places, + * with or without the BTM. + */ + if (!tty_was_locked) + tty_lock(); /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1579,7 +1585,8 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) break; } __set_current_state(TASK_RUNNING); - tty_unlock(); + if (!tty_was_locked) + tty_unlock(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 16f5f2f..edcf1cc 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1705,7 +1705,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) printk("jiff=%lu...", jiffies); #endif - tty_lock_nested(); /* always held already since we come from ->close */ /* We go through the loop at least once because we can't tell * exactly when the last character exits the shifter. There can * be at least two characters waiting to be sent after the buffers @@ -1734,7 +1733,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) bdp--; } while (bdp->status & BD_SC_READY); current->state = TASK_RUNNING; - tty_unlock(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 94bfb9f..8e356c5 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -3935,7 +3935,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) */ - tty_lock_nested(); /* locked already when coming from close */ orig_jiffies = jiffies; while (info->xmit.head != info->xmit.tail || /* More in send queue */ (*info->ostatusadr & 0x007f) || /* more in FIFO */ @@ -3952,7 +3951,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) curr_time_usec - info->last_tx_active_usec; } set_current_state(TASK_RUNNING); - tty_unlock(); } /* diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 851d7c2..cd85112 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -60,7 +60,7 @@ static struct lock_class_key port_lock_key; static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); -static void uart_wait_until_sent(struct tty_struct *tty, int timeout); +static void __uart_wait_until_sent(struct uart_port *port, int timeout); static void uart_change_pm(struct uart_state *state, int pm_state); /* @@ -1322,8 +1322,16 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty->closing = 1; spin_unlock_irqrestore(&port->lock, flags); - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait)); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + /* + * hack: open-coded tty_wait_until_sent to avoid + * recursive tty_lock + */ + long timeout = msecs_to_jiffies(port->closing_wait); + if (wait_event_interruptible_timeout(tty->write_wait, + !tty_chars_in_buffer(tty), timeout) >= 0) + __uart_wait_until_sent(uport, timeout); + } /* * At this point, we stop accepting input. To do this, we @@ -1339,7 +1347,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * has completely drained; this is especially * important if there is a transmit FIFO! */ - uart_wait_until_sent(tty, uport->timeout); + __uart_wait_until_sent(uport, uport->timeout); } uart_shutdown(tty, state); @@ -1373,17 +1381,13 @@ done: mutex_unlock(&port->mutex); } -static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +static void __uart_wait_until_sent(struct uart_port *port, int timeout) { - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; unsigned long char_time, expire; if (port->type == PORT_UNKNOWN || port->fifosize == 0) return; - tty_lock_nested(); /* already locked when coming from close */ - /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1429,6 +1433,15 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) break; } set_current_state(TASK_RUNNING); /* might not be needed */ +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + tty_lock(); + __uart_wait_until_sent(port, timeout); tty_unlock(); } -- cgit v0.10.2 From ddcd9fb66ae7f448b517242c10a31d4e17bcad45 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:08 +0200 Subject: tty: remove tty_lock_nested This changes all remaining users of tty_lock_nested to be non-recursive, which lets us kill this function. As a consequence, we won't need to keep the lock count any more, which allows more simplifications later. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/pty.c b/drivers/char/pty.c index de22ea9..f2d7a76 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -62,7 +62,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) if (tty->driver == ptm_driver) devpts_pty_kill(tty->link); #endif - tty_vhangup(tty->link); + tty_vhangup_locked(tty->link); } } diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 75889cd..ebae344 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -313,7 +313,8 @@ int paste_selection(struct tty_struct *tty) struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); - tty_lock_nested(); /* always called with BTM from vt_ioctl */ + /* always called with BTM from vt_ioctl */ + WARN_ON(!tty_locked()); acquire_console_sem(); poke_blanked_console(); @@ -343,6 +344,5 @@ int paste_selection(struct tty_struct *tty) __set_current_state(TASK_RUNNING); tty_ldisc_deref(ld); - tty_unlock(); return 0; } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index bb22cf4..dcf7d36 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -492,10 +492,8 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand */ -static void do_tty_hangup(struct work_struct *work) +void tty_vhangup_locked(struct tty_struct *tty) { - struct tty_struct *tty = - container_of(work, struct tty_struct, hangup_work); struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; @@ -517,8 +515,6 @@ static void do_tty_hangup(struct work_struct *work) /* inuse_filps is protected by the single tty lock, this really needs to change if we want to flush the workqueue with the lock held */ - tty_lock_nested(); /* called with BTM held from pty_close and - others */ check_tty_count(tty, "do_tty_hangup"); file_list_lock(); @@ -598,11 +594,20 @@ static void do_tty_hangup(struct work_struct *work) */ set_bit(TTY_HUPPED, &tty->flags); tty_ldisc_enable(tty); - tty_unlock(); if (f) fput(f); } +static void do_tty_hangup(struct work_struct *work) +{ + struct tty_struct *tty = + container_of(work, struct tty_struct, hangup_work); + + tty_lock(); + tty_vhangup_locked(tty); + tty_unlock(); +} + /** * tty_hangup - trigger a hangup event * @tty: tty to hangup @@ -638,7 +643,9 @@ void tty_vhangup(struct tty_struct *tty) printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf)); #endif - do_tty_hangup(&tty->hangup_work); + tty_lock(); + tty_vhangup_locked(tty); + tty_unlock(); } EXPORT_SYMBOL(tty_vhangup); @@ -719,10 +726,12 @@ void disassociate_ctty(int on_exit) tty = get_current_tty(); if (tty) { tty_pgrp = get_pid(tty->pgrp); - tty_lock_nested(); /* see above */ - if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) - tty_vhangup(tty); - tty_unlock(); + if (on_exit) { + tty_lock(); + if (tty->driver->type != TTY_DRIVER_TYPE_PTY) + tty_vhangup_locked(tty); + tty_unlock(); + } tty_kref_put(tty); } else if (on_exit) { struct pid *old_pgrp; @@ -1213,18 +1222,14 @@ static int tty_driver_install_tty(struct tty_driver *driver, int ret; if (driver->ops->install) { - tty_lock_nested(); /* already called with BTM held */ ret = driver->ops->install(driver, tty); - tty_unlock(); return ret; } if (tty_init_termios(tty) == 0) { - tty_lock_nested(); tty_driver_kref_get(driver); tty->count++; driver->ttys[idx] = tty; - tty_unlock(); return 0; } return -ENOMEM; @@ -1317,15 +1322,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, struct tty_struct *tty; int retval; - tty_lock_nested(); /* always called with tty lock held already */ - /* Check if pty master is being opened multiple times */ if (driver->subtype == PTY_TYPE_MASTER && (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { - tty_unlock(); return ERR_PTR(-EIO); } - tty_unlock(); /* * First time open is complex, especially for PTY devices. @@ -1369,9 +1370,7 @@ release_mem_out: if (printk_ratelimit()) printk(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); - tty_lock_nested(); release_tty(tty, idx); - tty_unlock(); return ERR_PTR(retval); } diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 0f49479..412f977 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -450,9 +450,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) if (ld->ops->open) { int ret; /* BTM here locks versus a hangup event */ - tty_lock_nested(); /* always held here already */ + WARN_ON(!tty_locked()); ret = ld->ops->open(tty); - tty_unlock(); return ret; } return 0; diff --git a/include/linux/tty.h b/include/linux/tty.h index 955d72e..0fbafb0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -417,6 +417,7 @@ extern int is_ignored(int sig); extern int tty_signal(int sig, struct tty_struct *tty); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); +extern void tty_vhangup_locked(struct tty_struct *tty); extern void tty_vhangup_self(void); extern void tty_unhangup(struct file *filp); extern int tty_hung_up_p(struct file *filp); @@ -578,21 +579,6 @@ extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); /* functions for preparation of BKL removal */ - -/* - * tty_lock_nested get the tty_lock while potentially holding it - * - * The Big TTY Mutex is a recursive lock, meaning you can take it - * from a thread that is already holding it. - * This is bad for a number of reasons, so tty_lock_nested should - * really be used as rarely as possible. If a code location can - * be shown to never get called with this held already, it should - * use tty_lock() instead. - */ -static inline void __lockfunc tty_lock_nested(void) __acquires(kernel_lock) -{ - lock_kernel(); -} static inline void tty_lock(void) __acquires(kernel_lock) { #ifdef CONFIG_LOCK_KERNEL -- cgit v0.10.2 From b07471fa51358ce64cc25e1501544502362e4404 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Aug 2010 21:40:30 +0200 Subject: tty: implement BTM as mutex instead of BKL The tty locking now follows the rules for mutexes, so we can replace the BKL usage with a new subsystem wide mutex. Using a regular mutex here will change the behaviour when blocked on the BTM from spinning to sleeping, but that should not be visible to the user. Using the mutex also means that all the BTM is now covered by lockdep. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 273cee1..dc96416 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -9,6 +9,7 @@ FONTMAPFILE = cp437.uni obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o +obj-y += tty_mutex.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o diff --git a/drivers/char/tty_mutex.c b/drivers/char/tty_mutex.c new file mode 100644 index 0000000..1336975 --- /dev/null +++ b/drivers/char/tty_mutex.c @@ -0,0 +1,47 @@ +/* + * drivers/char/tty_lock.c + */ +#include +#include +#include +#include +#include + +/* + * The 'big tty mutex' + * + * This mutex is taken and released by tty_lock() and tty_unlock(), + * replacing the older big kernel lock. + * It can no longer be taken recursively, and does not get + * released implicitly while sleeping. + * + * Don't use in new code. + */ +static DEFINE_MUTEX(big_tty_mutex); +struct task_struct *__big_tty_mutex_owner; +EXPORT_SYMBOL_GPL(__big_tty_mutex_owner); + +/* + * Getting the big tty mutex. + */ +void __lockfunc tty_lock(void) +{ + struct task_struct *task = current; + + WARN_ON(__big_tty_mutex_owner == task); + + mutex_lock(&big_tty_mutex); + __big_tty_mutex_owner = task; +} +EXPORT_SYMBOL(tty_lock); + +void __lockfunc tty_unlock(void) +{ + struct task_struct *task = current; + + WARN_ON(__big_tty_mutex_owner != task); + __big_tty_mutex_owner = NULL; + + mutex_unlock(&big_tty_mutex); +} +EXPORT_SYMBOL(tty_unlock); diff --git a/include/linux/tty.h b/include/linux/tty.h index 0fbafb0..1437da3 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -578,20 +578,12 @@ extern int vt_ioctl(struct tty_struct *tty, struct file *file, extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); +/* tty_mutex.c */ /* functions for preparation of BKL removal */ -static inline void tty_lock(void) __acquires(kernel_lock) -{ -#ifdef CONFIG_LOCK_KERNEL - /* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */ - WARN_ON(kernel_locked()); -#endif - lock_kernel(); -} -static inline void tty_unlock(void) __releases(kernel_lock) -{ - unlock_kernel(); -} -#define tty_locked() (kernel_locked()) +extern void __lockfunc tty_lock(void) __acquires(tty_lock); +extern void __lockfunc tty_unlock(void) __releases(tty_lock); +extern struct task_struct *__big_tty_mutex_owner; +#define tty_locked() (current == __big_tty_mutex_owner) /* * wait_event_interruptible_tty -- wait for a condition with the tty lock held -- cgit v0.10.2 From e142a31da34b42458e10026b554e66127739cf23 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:10 +0200 Subject: tty: release BTM while sleeping in block_til_ready Most tty drivers may block while opening a device. Since this possibly depends on another thread closing it first and both threads may need the BTM, we need to release it here. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 8228e61..a11c8c9 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1710,7 +1710,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttys%d, count = %d\n", info->line, state->count); #endif + tty_unlock(); schedule(); + tty_lock(); } __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 911e1da..07f3ea3 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1486,7 +1486,9 @@ ip2_open( PTTY tty, struct file *pFile ) if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { if ( pCh->flags & ASYNC_CLOSING ) { + tty_unlock(); schedule(); + tty_lock(); } if ( tty_hung_up_p(pFile) ) { set_current_state( TASK_RUNNING ); @@ -1548,7 +1550,9 @@ ip2_open( PTTY tty, struct file *pFile ) rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); break; } + tty_unlock(); schedule(); + tty_lock(); } set_current_state( TASK_RUNNING ); remove_wait_queue(&pCh->open_wait, &wait); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 90b3ec0..f646725 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1786,7 +1786,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp, tty->name, info->count); /**/ #endif - schedule(); + tty_unlock(); + schedule(); + tty_lock(); } __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 7be456f..9f8495b 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1365,7 +1365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 2b03d4d..a2a5800 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -3349,7 +3349,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("%s(%d):block_til_ready blocking on %s count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 5a602eb..fef80cf 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -3244,7 +3244,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index ac447c7..e56caf7 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -3365,7 +3365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, printk("%s(%d):%s block_til_ready() count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 35eb3040..33d37d2 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -294,7 +294,9 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } finish_wait(&port->open_wait, &wait); diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 9330edb..d8204f4 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -1235,7 +1235,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } current->state = TASK_RUNNING; remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index edcf1cc..0dff3bb 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1860,7 +1860,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttys%d, count = %d\n", info->line, state->count); #endif + tty_unlock(); schedule(); + tty_lock(); } current->state = TASK_RUNNING; remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8e356c5..5696710 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -4066,7 +4066,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttyS%d, count = %d\n", info->line, info->count); #endif + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); -- cgit v0.10.2 From a0821df6e57c8af0053963d0d08c8d5198ea077d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Jun 2010 22:53:11 +0200 Subject: 8250: fix set_ldisc operation The ldisc number now gets passed into ->set_ldisc. Signed-off-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index bc8ed4b..355148d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2404,14 +2404,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, } static void -serial8250_set_ldisc(struct uart_port *port) +serial8250_set_ldisc(struct uart_port *port, int new) { - int line = port->line; - - if (line >= port->state->port.tty->driver->num) - return; - - if (port->state->port.tty->ldisc->ops->num == N_PPS) { + if (new == N_PPS) { port->flags |= UPF_HARDPPS_CD; serial8250_enable_ms(port); } else -- cgit v0.10.2 From 11dbf203922dc70a340417c895c95fb96f6b7068 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Jun 2010 14:58:07 +0200 Subject: tty: avoid recursive BTM in pty_close When the console has been redirected, a hangup of the tty will cause tty_release to be called under the big tty_mutex, which leads to a deadlock because hangup is also called under the BTM. This moves the BTM deeper into the tty_hangup function so we can close the redirected tty without holding the BTM. In case of pty, we now need to drop the BTM before calling tty_vhangup. Signed-off-by: Arnd Bergmann Acked-by: Alan Cox Cc: Tony Luck Cc: Thomas Gleixner Cc: Andrew Morton Cc: John Kacur Cc: Al Viro Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/pty.c b/drivers/char/pty.c index f2d7a76..ad46eae 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -62,7 +62,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp) if (tty->driver == ptm_driver) devpts_pty_kill(tty->link); #endif - tty_vhangup_locked(tty->link); + tty_unlock(); + tty_vhangup(tty->link); + tty_lock(); } } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index dcf7d36..4c4030c 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -471,7 +471,7 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); /** - * do_tty_hangup - actual handler for hangup events + * __tty_hangup - actual handler for hangup events * @work: tty device * * This can be called by the "eventd" kernel thread. That is process @@ -492,7 +492,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand */ -void tty_vhangup_locked(struct tty_struct *tty) +void __tty_hangup(struct tty_struct *tty) { struct file *cons_filp = NULL; struct file *filp, *f = NULL; @@ -512,10 +512,12 @@ void tty_vhangup_locked(struct tty_struct *tty) } spin_unlock(&redirect_lock); + tty_lock(); + /* inuse_filps is protected by the single tty lock, this really needs to change if we want to flush the workqueue with the lock held */ - check_tty_count(tty, "do_tty_hangup"); + check_tty_count(tty, "tty_hangup"); file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ @@ -594,6 +596,9 @@ void tty_vhangup_locked(struct tty_struct *tty) */ set_bit(TTY_HUPPED, &tty->flags); tty_ldisc_enable(tty); + + tty_unlock(); + if (f) fput(f); } @@ -603,9 +608,7 @@ static void do_tty_hangup(struct work_struct *work) struct tty_struct *tty = container_of(work, struct tty_struct, hangup_work); - tty_lock(); - tty_vhangup_locked(tty); - tty_unlock(); + __tty_hangup(tty); } /** @@ -643,13 +646,12 @@ void tty_vhangup(struct tty_struct *tty) printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf)); #endif - tty_lock(); - tty_vhangup_locked(tty); - tty_unlock(); + __tty_hangup(tty); } EXPORT_SYMBOL(tty_vhangup); + /** * tty_vhangup_self - process vhangup for own ctty * @@ -727,10 +729,8 @@ void disassociate_ctty(int on_exit) if (tty) { tty_pgrp = get_pid(tty->pgrp); if (on_exit) { - tty_lock(); if (tty->driver->type != TTY_DRIVER_TYPE_PTY) - tty_vhangup_locked(tty); - tty_unlock(); + tty_vhangup(tty); } tty_kref_put(tty); } else if (on_exit) { -- cgit v0.10.2 From 44318feb93327e36108b2a9cf94ac9f7ccabf047 Mon Sep 17 00:00:00 2001 From: "jianwei.yang" Date: Wed, 30 Jun 2010 17:57:12 +0100 Subject: serial: max3107: introduce a max3107 driver This device is used by some of the Intel MID platforms. It's not similar enough to the MAX3100 to use the same driver. At this point the driver is specific to the platform and not generalised. We will fix that later. Signed-off-by: jianwei.yang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 964634e..fd40627 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -542,6 +542,14 @@ config SERIAL_S5PV210 help Serial port support for Samsung's S5P Family of SoC's +config SERIAL_MAX3107 + tristate "MAX3107 support" + depends on SPI && GPIOLIB + select SERIAL_CORE + default y + help + MAX3107 chip support + config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index a5edb49..4cd0c06 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o +obj-$(CONFIG_SERIAL_MAX3107) += max3107.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c new file mode 100644 index 0000000..a96ddd3 --- /dev/null +++ b/drivers/serial/max3107.c @@ -0,0 +1,1442 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + + /* GPIO chip stucture */ + struct gpio_chip chip; + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* HW suspend function */ + void (*max3107_hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +static struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static struct baud_table brg26_ext[] = { + { 300, MAX3107_BRG26_B300 }, + { 600, MAX3107_BRG26_B600 }, + { 1200, MAX3107_BRG26_B1200 }, + { 2400, MAX3107_BRG26_B2400 }, + { 4800, MAX3107_BRG26_B4800 }, + { 9600, MAX3107_BRG26_B9600 }, + { 19200, MAX3107_BRG26_B19200 }, + { 57600, MAX3107_BRG26_B57600 }, + { 115200, MAX3107_BRG26_B115200 }, + { 230400, MAX3107_BRG26_B230400 }, + { 460800, MAX3107_BRG26_B460800 }, + { 921600, MAX3107_BRG26_B921600 }, + { 0, 0 } +}; + +static struct baud_table brg13_int[] = { + { 300, MAX3107_BRG13_IB300 }, + { 600, MAX3107_BRG13_IB600 }, + { 1200, MAX3107_BRG13_IB1200 }, + { 2400, MAX3107_BRG13_IB2400 }, + { 4800, MAX3107_BRG13_IB4800 }, + { 9600, MAX3107_BRG13_IB9600 }, + { 19200, MAX3107_BRG13_IB19200 }, + { 57600, MAX3107_BRG13_IB57600 }, + { 115200, MAX3107_BRG13_IB115200 }, + { 230400, MAX3107_BRG13_IB230400 }, + { 460800, MAX3107_BRG13_IB460800 }, + { 921600, MAX3107_BRG13_IB921600 }, + { 0, 0 } +}; + +static u32 get_new_brg(int baud, struct max3107_port *s) +{ + int i; + struct baud_table *baud_tbl = s->baud_tbl; + + for (i = 0; i < 13; i++) { + if (baud == baud_tbl[i].baud) + return baud_tbl[i].new_brg; + } + + return 0; +} + +/* Perform SPI transfer for write/read of device register(s) */ +static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +{ + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + /* Initialize SPI ,message */ + spi_message_init(&spi_msg); + + /* Initialize SPI transfer */ + memset(&spi_xfer, 0, sizeof spi_xfer); + spi_xfer.len = len; + spi_xfer.tx_buf = tx; + spi_xfer.rx_buf = rx; + spi_xfer.speed_hz = MAX3107_SPI_SPEED; + + /* Add SPI transfer to SPI message */ + spi_message_add_tail(&spi_xfer, &spi_msg); + +#ifdef DBG_TRACE_SPI_DATA + { + int i; + pr_info("tx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); + pr_info("\n"); + } +#endif + + /* Perform synchronous SPI transfer */ + if (spi_sync(s->spi, &spi_msg)) { + dev_err(&s->spi->dev, "spi_sync failure\n"); + return -EIO; + } + +#ifdef DBG_TRACE_SPI_DATA + if (spi_xfer.rx_buf) { + int i; + pr_info("rx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); + pr_info("\n"); + } +#endif + return 0; +} + +/* Puts received data to circular buffer */ +static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, + int len) +{ + struct uart_port *port = &s->port; + struct tty_struct *tty; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Insert received data */ + tty_insert_flip_string(tty, data, len); + /* Update RX counter */ + port->icount.rx += len; +} + +/* Handle data receiving */ +static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) +{ + int i; + int j; + int len; /* SPI transfer buffer length */ + u16 *buf; + u8 *valid_str; + + if (!s->rx_enabled) + /* RX is disabled */ + return; + + if (rxlvl == 0) { + /* RX fifo is empty */ + return; + } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { + dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); + /* Ensure sanity of RX level */ + rxlvl = MAX3107_RX_FIFO_SIZE; + } + if ((s->rxbuf == 0) || (s->rxstr == 0)) { + dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); + return; + } + buf = s->rxbuf; + valid_str = s->rxstr; + while (rxlvl) { + pr_debug("rxlvl %d\n", rxlvl); + /* Clear buffer */ + memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); + len = 0; + if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { + /* First disable RX FIFO interrupt */ + pr_debug("Disabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + len++; + } + /* Just increase the length by amount of words in FIFO since + * buffer was zeroed and SPI transfer of 0x0000 means reading + * from RX FIFO + */ + len += rxlvl; + /* Append RX level query */ + buf[len] = MAX3107_RXFIFOLVL_REG; + len++; + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { + dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); + return; + } + + /* Skip RX FIFO interrupt disabling word if it was added */ + j = ((len - 1) - rxlvl); + /* Read received words */ + for (i = 0; i < rxlvl; i++, j++) + valid_str[i] = (u8)buf[j]; + put_data_to_circ_buf(s, valid_str, rxlvl); + /* Get new RX level */ + rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); + } + + if (s->rx_enabled) { + /* RX still enabled, re-enable RX FIFO interrupt */ + pr_debug("Enabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); + } + + /* Push the received data to receivers */ + if (s->port.state->port.tty) + tty_flip_buffer_push(s->port.state->port.tty); +} + + +/* Handle data sending */ +static void max3107_handletx(struct max3107_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + int i; + unsigned long flags; + int len; /* SPI transfer buffer length */ + u16 *buf; + + if (!s->tx_fifo_empty) + /* Don't send more data before previous data is sent */ + return; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + /* No data to send or TX is stopped */ + return; + + if (!s->txbuf) { + dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); + return; + } + buf = s->txbuf; + /* Get length of data pending in circular buffer */ + len = uart_circ_chars_pending(xmit); + if (len) { + /* Limit to size of TX FIFO */ + if (len > MAX3107_TX_FIFO_SIZE) + len = MAX3107_TX_FIFO_SIZE; + + pr_debug("txlen %d\n", len); + + /* Update TX counter */ + s->port.icount.tx += len; + + /* TX FIFO will no longer be empty */ + s->tx_fifo_empty = 0; + + i = 0; + if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { + /* First disable TX empty interrupt */ + pr_debug("Disabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + /* Add data to send */ + spin_lock_irqsave(&s->port.lock, flags); + for ( ; i < len ; i++) { + buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); + buf[i] |= ((u16)xmit->buf[xmit->tail] & + MAX3107_SPI_TX_DATA_MASK); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&s->port.lock, flags); + if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { + /* Enable TX empty interrupt */ + pr_debug("Enabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + if (!s->tx_enabled) { + /* Enable TX */ + pr_debug("Enable TX\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; + buf[i] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + s->tx_enabled = 1; + i++; + len++; + } + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { + dev_err(&s->spi->dev, + "SPI transfer TX handling failed\n"); + return; + } + } + + /* Indicate wake up if circular buffer is getting low on data */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + +} + +/* Handle interrupts + * Also reads and returns current RX FIFO level + */ +static u16 handle_interrupt(struct max3107_port *s) +{ + u16 buf[4]; /* Buffer for SPI transfers */ + u8 irq_status; + u16 rx_level; + unsigned long flags; + + /* Read IRQ status register */ + buf[0] = MAX3107_IRQSTS_REG; + /* Read status IRQ status register */ + buf[1] = MAX3107_STS_IRQSTS_REG; + /* Read LSR IRQ status register */ + buf[2] = MAX3107_LSR_IRQSTS_REG; + /* Query RX level */ + buf[3] = MAX3107_RXFIFOLVL_REG; + + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { + dev_err(&s->spi->dev, + "SPI transfer for INTR handling failed\n"); + return 0; + } + + irq_status = (u8)buf[0]; + pr_debug("IRQSTS %x\n", irq_status); + rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); + + if (irq_status & MAX3107_IRQ_LSR_BIT) { + /* LSR interrupt */ + if (buf[2] & MAX3107_LSR_RXTO_BIT) + /* RX timeout interrupt, + * handled by normal RX handling + */ + pr_debug("RX TO INT\n"); + } + + if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { + /* Tx empty interrupt, + * disable TX and set tx_fifo_empty flag + */ + pr_debug("TE INT, disabling TX\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); + s->tx_enabled = 0; + s->tx_fifo_empty = 1; + } + + if (irq_status & MAX3107_IRQ_RXFIFO_BIT) + /* RX FIFO interrupt, + * handled by normal RX handling + */ + pr_debug("RFIFO INT\n"); + + /* Return RX level */ + return rx_level; +} + +/* Trigger work thread*/ +static void max3107_dowork(struct max3107_port *s) +{ + if (!work_pending(&s->work) && !freezing(current) && !s->suspended) + queue_work(s->workqueue, &s->work); + else + dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); +} + +/* Work thread */ +static void max3107_work(struct work_struct *w) +{ + struct max3107_port *s = container_of(w, struct max3107_port, work); + u16 rxlvl = 0; + int len; /* SPI transfer buffer length */ + u16 buf[5]; /* Buffer for SPI transfers */ + unsigned long flags; + + /* Start by reading current RX FIFO level */ + buf[0] = MAX3107_RXFIFOLVL_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); + rxlvl = 0; + } else { + rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); + } + + do { + pr_debug("rxlvl %d\n", rxlvl); + + /* Handle RX */ + max3107_handlerx(s, rxlvl); + rxlvl = 0; + + if (s->handle_irq) { + /* Handle pending interrupts + * We also get new RX FIFO level since new data may + * have been received while pushing received data to + * receivers + */ + s->handle_irq = 0; + rxlvl = handle_interrupt(s); + } + + /* Handle TX */ + max3107_handletx(s); + + /* Handle configuration changes */ + len = 0; + spin_lock_irqsave(&s->data_lock, flags); + if (s->mode1_commit) { + pr_debug("mode1_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + buf[len++] |= s->mode1_reg; + s->mode1_commit = 0; + } + if (s->lcr_commit) { + pr_debug("lcr_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); + buf[len++] |= s->lcr_reg; + s->lcr_commit = 0; + } + if (s->brg_commit) { + pr_debug("brg_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); + buf[len++] |= ((s->brg_cfg >> 16) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); + buf[len++] |= ((s->brg_cfg >> 8) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); + buf[len++] |= ((s->brg_cfg) & 0xff); + s->brg_commit = 0; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + if (len > 0) { + if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) + dev_err(&s->spi->dev, + "SPI transfer config failed\n"); + } + + /* Reloop if interrupt handling indicated data in RX FIFO */ + } while (rxlvl); + +} + +/* Set sleep mode */ +static void max3107_set_sleep(struct max3107_port *s, int mode) +{ + u16 buf[1]; /* Buffer for SPI transfer */ + unsigned long flags; + pr_debug("enter, mode %d\n", mode); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + switch (mode) { + case MAX3107_DISABLE_FORCED_SLEEP: + s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_ENABLE_FORCED_SLEEP: + s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_DISABLE_AUTOSLEEP: + s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; + break; + case MAX3107_ENABLE_AUTOSLEEP: + s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; + break; + default: + spin_unlock_irqrestore(&s->data_lock, flags); + dev_warn(&s->spi->dev, "invalid sleep mode\n"); + return; + } + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); + + if (mode == MAX3107_DISABLE_AUTOSLEEP || + mode == MAX3107_DISABLE_FORCED_SLEEP) + msleep(MAX3107_WAKEUP_DELAY); +} + +/* Perform full register initialization */ +static void max3107_register_init(struct max3107_port *s) +{ + u16 buf[11]; /* Buffer for SPI transfers */ + + /* 1. Configure baud rate, 9600 as default */ + s->baud = 9600; + /* the below is default*/ + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG26_B9600; + s->baud_tbl = (struct baud_table *)brg26_ext; + } else { + s->brg_cfg = MAX3107_BRG13_IB9600; + s->baud_tbl = (struct baud_table *)brg13_int; + } +#if 0 + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +#endif + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) + | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); + buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) + | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); + buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) + | ((s->brg_cfg) & 0xff); + + /* 2. Configure LCR register, 8N1 mode by default */ + s->lcr_reg = MAX3107_LCR_WORD_LEN_8; + buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) + | s->lcr_reg; + + /* 3. Configure MODE 1 register */ + s->mode1_reg = 0; + /* Enable IRQ pin */ + s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; + /* Disable TX */ + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + s->tx_enabled = 0; + /* RX is enabled */ + s->rx_enabled = 1; + buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) + | s->mode1_reg; + + /* 4. Configure MODE 2 register */ + buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Enable loopback */ + buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; + } + /* Reset FIFOs */ + buf[5] |= MAX3107_MODE2_FIFORST_BIT; + s->tx_fifo_empty = 1; + + /* 5. Configure FIFO trigger level register */ + buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); + /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ + buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); + + /* 6. Configure flow control levels */ + buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); + /* Flow control halt level 96, resume level 48 */ + buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); + + /* 7. Configure flow control */ + buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); + /* Enable auto CTS and auto RTS flow control */ + buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); + + /* 8. Configure RX timeout register */ + buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); + /* Timeout after 48 character intervals */ + buf[9] |= 0x0030; + + /* 9. Configure LSR interrupt enable register */ + buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); + /* Enable RX timeout interrupt */ + buf[10] |= MAX3107_LSR_RXTO_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 22)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + + /* 10. Clear IRQ status register by reading it */ + buf[0] = MAX3107_IRQSTS_REG; + + /* 11. Configure interrupt enable register */ + /* Enable LSR interrupt */ + s->irqen_reg = MAX3107_IRQ_LSR_BIT; + /* Enable RX FIFO interrupt */ + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) + | s->irqen_reg; + + /* 12. Clear FIFO reset that was set in step 6 */ + buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Keep loopback enabled */ + buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; + } + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + +} + +/* IRQ handler */ +static irqreturn_t max3107_irq(int irqno, void *dev_id) +{ + struct max3107_port *s = dev_id; + + if (irqno != s->spi->irq) { + /* Unexpected IRQ */ + return IRQ_NONE; + } + + /* Indicate irq */ + s->handle_irq = 1; + + /* Trigger work thread */ + max3107_dowork(s); + + return IRQ_HANDLED; +} + +/* HW suspension function + * + * Currently autosleep is used to decrease current consumption, alternative + * approach would be to set the chip to reset mode if UART is not being + * used but that would mess the GPIOs + * + */ +static void max3107_hw_susp(struct max3107_port *s, int suspend) +{ + pr_debug("enter, suspend %d\n", suspend); + + if (suspend) { + /* Suspend requested, + * enable autosleep to decrease current consumption + */ + s->suspended = 1; + max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); + } else { + /* Resume requested, + * disable autosleep + */ + s->suspended = 0; + max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); + } +} + +/* Modem status IRQ enabling */ +static void max3107_enable_ms(struct uart_port *port) +{ + /* Modem status not supported */ +} + +/* Data send function */ +static void max3107_start_tx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Trigger work thread for sending data */ + max3107_dowork(s); +} + +/* Function for checking that there is no pending transfers */ +static unsigned int max3107_tx_empty(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + pr_debug("returning %d\n", + (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); + return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); +} + +/* Function for stopping RX */ +static void max3107_stop_rx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + unsigned long flags; + + /* Set RX disabled in MODE 1 register */ + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; + s->mode1_commit = 1; + spin_unlock_irqrestore(&s->data_lock, flags); + /* Set RX disabled */ + s->rx_enabled = 0; + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Function for returning control pin states */ +static unsigned int max3107_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +/* Function for setting control pin states */ +static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* DCD and DSR are not wired and CTS/RTS is hadnled automatically + * so do nothing + */ +} + +/* Function for configuring UART parameters */ +static void max3107_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + struct tty_struct *tty; + int baud; + u16 new_lcr = 0; + u32 new_brg = 0; + unsigned long flags; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Get new LCR register values */ + /* Word size */ + if ((termios->c_cflag & CSIZE) == CS7) + new_lcr |= MAX3107_LCR_WORD_LEN_7; + else + new_lcr |= MAX3107_LCR_WORD_LEN_8; + + /* Parity */ + if (termios->c_cflag & PARENB) { + new_lcr |= MAX3107_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + new_lcr |= MAX3107_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) { + /* 2 stop bits */ + new_lcr |= MAX3107_LCR_STOPLEN_BIT; + } + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Set status ignore mask */ + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; + + /* Set low latency to immediately handle pushed data */ + s->port.state->port.tty->low_latency = 1; + + /* Get new baud rate generator configuration */ + baud = tty_get_baud_rate(tty); + + spin_lock_irqsave(&s->data_lock, flags); + new_brg = get_new_brg(baud, s); + /* if can't find the corrent config, use previous */ + if (!new_brg) { + baud = s->baud; + new_brg = s->brg_cfg; + } + spin_unlock_irqrestore(&s->data_lock, flags); + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock_irqsave(&s->data_lock, flags); + if (s->lcr_reg != new_lcr) { + s->lcr_reg = new_lcr; + s->lcr_commit = 1; + } + if (s->brg_cfg != new_brg) { + s->brg_cfg = new_brg; + s->brg_commit = 1; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Port shutdown function */ +static void max3107_shutdown(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + if (s->suspended) { + /* Resume HW */ + max3107_hw_susp(s, 0); + } + + /* Free the interrupt */ + free_irq(s->spi->irq, s); + + if (s->workqueue) { + /* Flush and destroy work queue */ + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + + /* Suspend HW */ + max3107_hw_susp(s, 1); +} + +/* Port startup function */ +static int max3107_startup(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Initialize work queue */ + s->workqueue = create_freezeable_workqueue("max3107"); + if (!s->workqueue) { + dev_err(&s->spi->dev, "Workqueue creation failed\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3107_work); + + /* Setup IRQ */ + if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, + "max3107", s)) { + dev_err(&s->spi->dev, "IRQ reguest failed\n"); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + /* Resume HW */ + max3107_hw_susp(s, 0); + + /* Init registers */ + max3107_register_init(s); + + return 0; +} + +/* Port type function */ +static const char *max3107_type(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + return s->spi->modalias; +} + +/* Port release function */ +static void max3107_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port request function */ +static int max3107_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +/* Port config function */ +static void max3107_config_port(struct uart_port *port, int flags) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Use PORT_MAX3100 since we are at least int the same series */ + s->port.type = PORT_MAX3100; +} + +/* Port verify function */ +static int max3107_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + return 0; + + return -EINVAL; +} + +/* Port stop TX function */ +static void max3107_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port break control function */ +static void max3107_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support break control, do nothing */ +} + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* Platform data */ +static struct max3107_plat max3107_plat_data = { + .loopback = 0, + .ext_clk = 1, + .max3107_hw_suspend = &max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + +/* Port functions */ +static struct uart_ops max3107_ops = { + .tx_empty = max3107_tx_empty, + .set_mctrl = max3107_set_mctrl, + .get_mctrl = max3107_get_mctrl, + .stop_tx = max3107_stop_tx, + .start_tx = max3107_start_tx, + .stop_rx = max3107_stop_rx, + .enable_ms = max3107_enable_ms, + .break_ctl = max3107_break_ctl, + .startup = max3107_startup, + .shutdown = max3107_shutdown, + .set_termios = max3107_set_termios, + .type = max3107_type, + .release_port = max3107_release_port, + .request_port = max3107_request_port, + .config_port = max3107_config_port, + .verify_port = max3107_verify_port, +}; + +/* UART driver data */ +static struct uart_driver max3107_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .nr = 1, +}; + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; +/* Device probe function */ +static int __devinit max3107_probe(struct spi_device *spi) +{ + struct max3107_port *s; + struct max3107_plat *pdata = &max3107_plat_data; + u16 buf[2]; /* Buffer for SPI transfers */ + int retval; + + pr_info("enter max3107 probe\n"); + + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + + /* Allocate port structure */ + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) { + pr_err("Allocating port structure failed\n"); + return -ENOMEM; + } + /* SPI Rx buffer + * +2 for RX FIFO interrupt + * disabling and RX level query + */ + s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); + if (!s->rxbuf) { + pr_err("Allocating RX buffer failed\n"); + return -ENOMEM; + } + s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); + if (!s->rxstr) { + pr_err("Allocating RX buffer failed\n"); + return -ENOMEM; + } + /* SPI Tx buffer + * SPI transfer buffer + * +3 for TX FIFO empty + * interrupt disabling and + * enabling and TX enabling + */ + s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); + if (!s->txbuf) { + pr_err("Allocating TX buffer failed\n"); + return -ENOMEM; + } + /* Initialize shared data lock */ + spin_lock_init(&s->data_lock); + + /* SPI intializations */ + dev_set_drvdata(&spi->dev, s); + spi->mode = SPI_MODE_0; + spi->dev.platform_data = pdata; + spi->bits_per_word = 16; + s->ext_clk = pdata->ext_clk; + s->loopback = pdata->loopback; + spi_setup(spi); + s->spi = spi; + + /* Check REV ID to ensure we are talking to what we expect */ + buf[0] = MAX3107_REVID_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); + return -EIO; + } + if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && + (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { + dev_err(&s->spi->dev, "REVID %x does not match\n", + (buf[0] & MAX3107_SPI_RX_DATA_MASK)); + return -ENODEV; + } + + /* Disable all interrupts */ + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); + buf[0] |= 0x0000; + + /* Configure clock source */ + buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); + if (s->ext_clk) { + /* External clock */ + buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; + } + + /* PLL bypass ON */ + buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + return -EIO; + } + + /* Register UART driver */ + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + return retval; + } + + /* Initialize UART port data */ + s->port.fifosize = 128; + s->port.ops = &max3107_ops; + s->port.line = 0; + s->port.dev = &spi->dev; + s->port.uartclk = 9600; + s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + s->port.irq = s->spi->irq; + /* Use PORT_MAX3100 since we are at least in the same series */ + s->port.type = PORT_MAX3100; + + /* Add UART port */ + retval = uart_add_one_port(&max3107_uart_driver, &s->port); + if (retval < 0) { + dev_err(&s->spi->dev, "Adding UART port failed\n"); + return retval; + } + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = spi->modalias; + s->chip.dev = &spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + + /* Go to suspend mode */ + max3107_hw_susp(s, 1); + + return 0; +} + +/* Driver remove function */ +static int __devexit max3107_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_info("enter max3107 remove\n"); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&s->spi->dev, "Removing GPIO chip failed\n"); + + /* Remove port */ + if (uart_remove_one_port(&max3107_uart_driver, &s->port)) + dev_warn(&s->spi->dev, "Removing UART port failed\n"); + + /* Unregister UART driver */ + uart_unregister_driver(&max3107_uart_driver); + + /* Free TxRx buffer */ + kfree(s->rxbuf); + kfree(s->rxstr); + kfree(s->txbuf); + + /* Free port structure */ + kfree(s); + + return 0; +} + +/* Driver suspend function */ +static int max3107_suspend(struct spi_device *spi, pm_message_t state) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter suspend\n"); + + /* Suspend UART port */ + uart_suspend_port(&max3107_uart_driver, &s->port); + + /* Go to suspend mode */ + max3107_hw_susp(s, 1); +#endif /* CONFIG_PM */ + return 0; +} + +/* Driver resume function */ +static int max3107_resume(struct spi_device *spi) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter resume\n"); + + /* Resume from suspend */ + max3107_hw_susp(s, 0); + + /* Resume UART port */ + uart_resume_port(&max3107_uart_driver, &s->port); +#endif /* CONFIG_PM */ + return 0; +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe, + .remove = __devexit_p(max3107_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + pr_info("enter max3107 init\n"); + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + pr_info("enter max3107 exit\n"); + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("max3107-spi-uart"); +MODULE_LICENSE("GPLv2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h new file mode 100644 index 0000000..a5625d1 --- /dev/null +++ b/drivers/serial/max3107.h @@ -0,0 +1,358 @@ +/* + * max3107.h - spi uart protocol driver header for Maxim 3107 + * + * Copyright (C) Aavamobile 2009 + * Based on serial_max3100.h by Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_SERIAL_MAX3107_H +#define _LINUX_SERIAL_MAX3107_H + +/* Serial error status definitions */ +#define MAX3107_PARITY_ERROR 1 +#define MAX3107_FRAME_ERROR 2 +#define MAX3107_OVERRUN_ERROR 4 +#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ + MAX3107_FRAME_ERROR | \ + MAX3107_OVERRUN_ERROR) + +/* GPIO definitions */ +#define MAX3107_GPIO_BASE 88 +#define MAX3107_GPIO_COUNT 4 + + +/* GPIO connected to chip's reset pin */ +#define MAX3107_RESET_GPIO 87 + + +/* Chip reset delay */ +#define MAX3107_RESET_DELAY 10 + +/* Chip wakeup delay */ +#define MAX3107_WAKEUP_DELAY 50 + + +/* Sleep mode definitions */ +#define MAX3107_DISABLE_FORCED_SLEEP 0 +#define MAX3107_ENABLE_FORCED_SLEEP 1 +#define MAX3107_DISABLE_AUTOSLEEP 2 +#define MAX3107_ENABLE_AUTOSLEEP 3 + + +/* Definitions for register access with SPI transfers + * + * SPI transfer format: + * + * Master to slave bits xzzzzzzzyyyyyyyy + * Slave to master bits aaaaaaaabbbbbbbb + * + * where: + * x = 0 for reads, 1 for writes + * z = register address + * y = new register value if write, 0 if read + * a = unspecified + * b = register value if read, unspecified if write + */ + +/* SPI speed */ +#define MAX3107_SPI_SPEED (3125000 * 2) + +/* Write bit */ +#define MAX3107_WRITE_BIT (1 << 15) + +/* SPI TX data mask */ +#define MAX3107_SPI_RX_DATA_MASK (0x00ff) + +/* SPI RX data mask */ +#define MAX3107_SPI_TX_DATA_MASK (0x00ff) + +/* Register access masks */ +#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ +#define MAX3107_THR_REG (0x0000) /* TX FIFO */ +#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ +#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ +#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ +#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ +#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ +#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ +#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ +#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ +#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ +#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ +#define MAX3107_LCR_REG (0x0b00) /* LCR */ +#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ +#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ +#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ +#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ +#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ +#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ +#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ +#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ +#define MAX3107_XON1_REG (0x1400) /* XON1 character */ +#define MAX3107_XON2_REG (0x1500) /* XON2 character */ +#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ +#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ +#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ +#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ +#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ +#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ +#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ +#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ +#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ +#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ + +/* IRQ register bits */ +#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ +#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Status register bits */ +#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ +#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ +#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* MODE1 register bits */ +#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ +#define MAX3107_LCR_WORD_LEN_5 (0x0000) +#define MAX3107_LCR_WORD_LEN_6 (0x0001) +#define MAX3107_LCR_WORD_LEN_7 (0x0002) +#define MAX3107_LCR_WORD_LEN_8 (0x0003) + + +/* IRDA register bits */ +#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ +#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ +#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ +#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ +#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ +#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Flow control trigger level register masks */ +#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) +#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) +#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) + +/* Flow control register bits */ +#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* GPIO configuration register bits */ +#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ +#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ +#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ +#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ +#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ +#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ +#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ +#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ + +/* GPIO DATA register bits */ +#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ +#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ +#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ +#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ +#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ +#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ +#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ +#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ + +/* PLL configuration register masks */ +#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ +#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register masks and bits */ +#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of + * Baud rate generator divisor + */ +#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ +#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Clock source register bits */ +#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ +#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ +#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + + +/* HW definitions */ +#define MAX3107_RX_FIFO_SIZE 128 +#define MAX3107_TX_FIFO_SIZE 128 +#define MAX3107_REVID1 0x00a0 +#define MAX3107_REVID2 0x00a1 + + +/* Baud rate generator configuration values for external clock 13MHz */ +#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) +#define MAX3107_BRG13_B600 (0x054A00 | 0x03) +#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) +#define MAX3107_BRG13_B2400 (0x015200 | 0x09) +#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) +#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) +#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) +#define MAX3107_BRG13_B38400 (0x001500 | 0x03) +#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) +#define MAX3107_BRG13_B115200 (0x000700 | 0x01) +#define MAX3107_BRG13_B230400 (0x000300 | 0x08) +#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) +#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) + +/* Baud rate generator configuration values for external clock 26MHz */ +#define MAX3107_BRG26_B300 (0x152800 | 0x0A) +#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) +#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) +#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) +#define MAX3107_BRG26_B4800 (0x015200 | 0x09) +#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) +#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) +#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) +#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) +#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) +#define MAX3107_BRG26_B230400 (0x000700 | 0x01) +#define MAX3107_BRG26_B460800 (0x000300 | 0x08) +#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) + +/* Baud rate generator configuration values for internal clock */ +#define MAX3107_BRG13_IB300 (0x008000 | 0x00) +#define MAX3107_BRG13_IB600 (0x004000 | 0x00) +#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) +#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) +#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) +#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) +#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) +#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) +#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) +#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) +#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) +#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) +#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + +#endif /* _LINUX_SERIAL_MAX3107_H */ -- cgit v0.10.2 From 61fd15262bb9c88a05fd89af22add9317dc1b1f4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 30 Jun 2010 17:58:38 +0100 Subject: serial: max3107: Abstract out the platform specific bits At the moment there is only one platform type supported and there is is hard wired, but with these changes the infrastructure is now there for anyone else to provide methods for their hardware. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index fd40627..c34c217 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -542,20 +542,29 @@ config SERIAL_S5PV210 help Serial port support for Samsung's S5P Family of SoC's + +config SERIAL_MAX3100 + tristate "MAX3100 support" + depends on SPI + select SERIAL_CORE + help + MAX3100 chip support + config SERIAL_MAX3107 tristate "MAX3107 support" - depends on SPI && GPIOLIB + depends on SPI select SERIAL_CORE - default y help MAX3107 chip support -config SERIAL_MAX3100 - tristate "MAX3100 support" - depends on SPI +config SERIAL_MAX3107_AAVA + tristate "MAX3107 AAVA platform support" + depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB select SERIAL_CORE help - MAX3100 chip support + Support for the MAX3107 chip configuration found on the AAVA + platform. Includes the extra initialisation and GPIO support + neded for this device. config SERIAL_DZ bool "DECstation DZ serial driver" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 4cd0c06..424067a 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c new file mode 100644 index 0000000..a1fe304 --- /dev/null +++ b/drivers/serial/max3107-aava.c @@ -0,0 +1,344 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; + +/** + * max3107_aava_reset - reset on AAVA systems + * @spi: The SPI device we are probing + * + * Reset the device ready for probing. + */ + +static int max3107_aava_reset(struct spi_device *spi) +{ + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + return 0; +} + +static int max3107_aava_configure(struct max3107_port *s) +{ + int retval; + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = s->spi->modalias; + s->chip.dev = &s->spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + return 0; +} + +#if 0 +/* This will get enabled once we have the board stuff merged for this + specific case */ + +static const struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static void max3107_aava_init(struct max3107_port *s) +{ + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +} +#endif + +static int __devexit max3107_aava_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&spi->dev, "Removing GPIO chip failed\n"); + + /* Then do the default remove */ + return max3107_remove(spi); +} + +/* Platform data */ +static struct max3107_plat aava_plat_data = { + .loopback = 0, + .ext_clk = 1, +/* .init = max3107_aava_init, */ + .configure = max3107_aava_configure, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +static int __devinit max3107_probe_aava(struct spi_device *spi) +{ + int err = max3107_aava_reset(spi); + if (err < 0) + return err; + return max3107_probe(spi, &aava_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "aava-max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_aava, + .remove = __devexit_p(max3107_aava_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("aava-max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c index a96ddd3..67283c1 100644 --- a/drivers/serial/max3107.c +++ b/drivers/serial/max3107.c @@ -31,98 +31,12 @@ #include #include #include +#include #include #include -#include -#include -#include -#include #include "max3107.h" -struct baud_table { - int baud; - u32 new_brg; -}; - -struct max3107_port { - /* UART port structure */ - struct uart_port port; - - /* SPI device structure */ - struct spi_device *spi; - - /* GPIO chip stucture */ - struct gpio_chip chip; - - /* Workqueue that does all the magic */ - struct workqueue_struct *workqueue; - struct work_struct work; - - /* Lock for shared data */ - spinlock_t data_lock; - - /* Device configuration */ - int ext_clk; /* 1 if external clock used */ - int loopback; /* Current loopback mode state */ - int baud; /* Current baud rate */ - - /* State flags */ - int suspended; /* Indicates suspend mode */ - int tx_fifo_empty; /* Flag for TX FIFO state */ - int rx_enabled; /* Flag for receiver state */ - int tx_enabled; /* Flag for transmitter state */ - - u16 irqen_reg; /* Current IRQ enable register value */ - /* Shared data */ - u16 mode1_reg; /* Current mode1 register value*/ - int mode1_commit; /* Flag for setting new mode1 register value */ - u16 lcr_reg; /* Current LCR register value */ - int lcr_commit; /* Flag for setting new LCR register value */ - u32 brg_cfg; /* Current Baud rate generator config */ - int brg_commit; /* Flag for setting new baud rate generator - * config - */ - struct baud_table *baud_tbl; - int handle_irq; /* Indicates that IRQ should be handled */ - - /* Rx buffer and str*/ - u16 *rxbuf; - u8 *rxstr; - /* Tx buffer*/ - u16 *txbuf; -}; - -/* Platform data structure */ -struct max3107_plat { - /* Loopback mode enable */ - int loopback; - /* External clock enable */ - int ext_clk; - /* HW suspend function */ - void (*max3107_hw_suspend) (struct max3107_port *s, int suspend); - /* Polling mode enable */ - int polled_mode; - /* Polling period if polling mode enabled */ - int poll_time; -}; - -static struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static struct baud_table brg26_ext[] = { +static const struct baud_table brg26_ext[] = { { 300, MAX3107_BRG26_B300 }, { 600, MAX3107_BRG26_B600 }, { 1200, MAX3107_BRG26_B1200 }, @@ -138,7 +52,7 @@ static struct baud_table brg26_ext[] = { { 0, 0 } }; -static struct baud_table brg13_int[] = { +static const struct baud_table brg13_int[] = { { 300, MAX3107_BRG13_IB300 }, { 600, MAX3107_BRG13_IB600 }, { 1200, MAX3107_BRG13_IB1200 }, @@ -157,7 +71,7 @@ static struct baud_table brg13_int[] = { static u32 get_new_brg(int baud, struct max3107_port *s) { int i; - struct baud_table *baud_tbl = s->baud_tbl; + const struct baud_table *baud_tbl = s->baud_tbl; for (i = 0; i < 13; i++) { if (baud == baud_tbl[i].baud) @@ -168,7 +82,7 @@ static u32 get_new_brg(int baud, struct max3107_port *s) } /* Perform SPI transfer for write/read of device register(s) */ -static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) { struct spi_message spi_msg; struct spi_transfer spi_xfer; @@ -213,6 +127,7 @@ static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) #endif return 0; } +EXPORT_SYMBOL_GPL(max3107_rw); /* Puts received data to circular buffer */ static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, @@ -611,16 +526,10 @@ static void max3107_register_init(struct max3107_port *s) s->brg_cfg = MAX3107_BRG13_IB9600; s->baud_tbl = (struct baud_table *)brg13_int; } -#if 0 - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -#endif + + if (s->pdata->init) + s->pdata->init(s); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) @@ -734,7 +643,7 @@ static irqreturn_t max3107_irq(int irqno, void *dev_id) * used but that would mess the GPIOs * */ -static void max3107_hw_susp(struct max3107_port *s, int suspend) +void max3107_hw_susp(struct max3107_port *s, int suspend) { pr_debug("enter, suspend %d\n", suspend); @@ -752,6 +661,7 @@ static void max3107_hw_susp(struct max3107_port *s, int suspend) max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); } } +EXPORT_SYMBOL_GPL(max3107_hw_susp); /* Modem status IRQ enabling */ static void max3107_enable_ms(struct uart_port *port) @@ -899,10 +809,8 @@ static void max3107_shutdown(struct uart_port *port) { struct max3107_port *s = container_of(port, struct max3107_port, port); - if (s->suspended) { - /* Resume HW */ - max3107_hw_susp(s, 0); - } + if (s->suspended && s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Free the interrupt */ free_irq(s->spi->irq, s); @@ -915,7 +823,8 @@ static void max3107_shutdown(struct uart_port *port) } /* Suspend HW */ - max3107_hw_susp(s, 1); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); } /* Port startup function */ @@ -941,7 +850,8 @@ static int max3107_startup(struct uart_port *port) } /* Resume HW */ - max3107_hw_susp(s, 0); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Init registers */ max3107_register_init(s); @@ -973,16 +883,14 @@ static int max3107_request_port(struct uart_port *port) static void max3107_config_port(struct uart_port *port, int flags) { struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Use PORT_MAX3100 since we are at least int the same series */ - s->port.type = PORT_MAX3100; + s->port.type = PORT_MAX3107; } /* Port verify function */ static int max3107_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) return 0; return -EINVAL; @@ -1000,157 +908,6 @@ static void max3107_break_ctl(struct uart_port *port, int break_state) /* We don't support break control, do nothing */ } -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* Platform data */ -static struct max3107_plat max3107_plat_data = { - .loopback = 0, - .ext_clk = 1, - .max3107_hw_suspend = &max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; /* Port functions */ static struct uart_ops max3107_ops = { @@ -1180,52 +937,48 @@ static struct uart_driver max3107_uart_driver = { .nr = 1, }; -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, +static int driver_registered = 0; + + + +/* 'Generic' platform data */ +static struct max3107_plat generic_plat_data = { + .loopback = 0, + .ext_clk = 1, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, }; -/* Device probe function */ -static int __devinit max3107_probe(struct spi_device *spi) + + +/*******************************************************************/ + +/** + * max3107_probe - SPI bus probe entry point + * @spi: the spi device + * + * SPI wants us to probe this device and if appropriate claim it. + * Perform any platform specific requirements and then initialise + * the device. + */ + +int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) { struct max3107_port *s; - struct max3107_plat *pdata = &max3107_plat_data; u16 buf[2]; /* Buffer for SPI transfers */ int retval; pr_info("enter max3107 probe\n"); - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - /* Allocate port structure */ s = kzalloc(sizeof(*s), GFP_KERNEL); if (!s) { pr_err("Allocating port structure failed\n"); return -ENOMEM; } + + s->pdata = pdata; + /* SPI Rx buffer * +2 for RX FIFO interrupt * disabling and RX level query @@ -1298,10 +1051,13 @@ static int __devinit max3107_probe(struct spi_device *spi) } /* Register UART driver */ - retval = uart_register_driver(&max3107_uart_driver); - if (retval) { - dev_err(&s->spi->dev, "Registering UART driver failed\n"); - return retval; + if (!driver_registered) { + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + return retval; + } + driver_registered = 1; } /* Initialize UART port data */ @@ -1312,8 +1068,7 @@ static int __devinit max3107_probe(struct spi_device *spi) s->port.uartclk = 9600; s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; s->port.irq = s->spi->irq; - /* Use PORT_MAX3100 since we are at least in the same series */ - s->port.type = PORT_MAX3100; + s->port.type = PORT_MAX3107; /* Add UART port */ retval = uart_add_one_port(&max3107_uart_driver, &s->port); @@ -1322,44 +1077,31 @@ static int __devinit max3107_probe(struct spi_device *spi) return retval; } - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = spi->modalias; - s->chip.dev = &spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; + if (pdata->configure) { + retval = pdata->configure(s); + if (retval < 0) + return retval; } - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - /* Go to suspend mode */ - max3107_hw_susp(s, 1); + if (pdata->hw_suspend) + pdata->hw_suspend(s, 1); return 0; } +EXPORT_SYMBOL_GPL(max3107_probe); /* Driver remove function */ -static int __devexit max3107_remove(struct spi_device *spi) +int max3107_remove(struct spi_device *spi) { struct max3107_port *s = dev_get_drvdata(&spi->dev); pr_info("enter max3107 remove\n"); - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&s->spi->dev, "Removing GPIO chip failed\n"); - /* Remove port */ if (uart_remove_one_port(&max3107_uart_driver, &s->port)) dev_warn(&s->spi->dev, "Removing UART port failed\n"); - /* Unregister UART driver */ - uart_unregister_driver(&max3107_uart_driver); /* Free TxRx buffer */ kfree(s->rxbuf); @@ -1371,9 +1113,10 @@ static int __devexit max3107_remove(struct spi_device *spi) return 0; } +EXPORT_SYMBOL_GPL(max3107_remove); /* Driver suspend function */ -static int max3107_suspend(struct spi_device *spi, pm_message_t state) +int max3107_suspend(struct spi_device *spi, pm_message_t state) { #ifdef CONFIG_PM struct max3107_port *s = dev_get_drvdata(&spi->dev); @@ -1384,13 +1127,15 @@ static int max3107_suspend(struct spi_device *spi, pm_message_t state) uart_suspend_port(&max3107_uart_driver, &s->port); /* Go to suspend mode */ - max3107_hw_susp(s, 1); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); #endif /* CONFIG_PM */ return 0; } +EXPORT_SYMBOL_GPL(max3107_suspend); /* Driver resume function */ -static int max3107_resume(struct spi_device *spi) +int max3107_resume(struct spi_device *spi) { #ifdef CONFIG_PM struct max3107_port *s = dev_get_drvdata(&spi->dev); @@ -1398,13 +1143,20 @@ static int max3107_resume(struct spi_device *spi) pr_debug("enter resume\n"); /* Resume from suspend */ - max3107_hw_susp(s, 0); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Resume UART port */ uart_resume_port(&max3107_uart_driver, &s->port); #endif /* CONFIG_PM */ return 0; } +EXPORT_SYMBOL_GPL(max3107_resume); + +static int max3107_probe_generic(struct spi_device *spi) +{ + return max3107_probe(spi, &generic_plat_data); +} /* Spi driver data */ static struct spi_driver max3107_driver = { @@ -1413,7 +1165,7 @@ static struct spi_driver max3107_driver = { .bus = &spi_bus_type, .owner = THIS_MODULE, }, - .probe = max3107_probe, + .probe = max3107_probe_generic, .remove = __devexit_p(max3107_remove), .suspend = max3107_suspend, .resume = max3107_resume, @@ -1430,6 +1182,9 @@ static int __init max3107_init(void) static void __exit max3107_exit(void) { pr_info("enter max3107 exit\n"); + /* Unregister UART driver */ + if (driver_registered) + uart_unregister_driver(&max3107_uart_driver); spi_unregister_driver(&max3107_driver); } @@ -1438,5 +1193,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi-uart"); -MODULE_LICENSE("GPLv2"); +MODULE_ALIAS("max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h index a5625d1..72b3041 100644 --- a/drivers/serial/max3107.h +++ b/drivers/serial/max3107.h @@ -10,8 +10,8 @@ * (at your option) any later version. */ -#ifndef _LINUX_SERIAL_MAX3107_H -#define _LINUX_SERIAL_MAX3107_H +#ifndef _MAX3107_H +#define _MAX3107_H /* Serial error status definitions */ #define MAX3107_PARITY_ERROR 1 @@ -355,4 +355,85 @@ #define MAX3107_BRG13_IB460800 (0x000000 | 0x00) #define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + + /* GPIO chip stucture */ + struct gpio_chip chip; + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; + + struct max3107_plat *pdata; /* Platform data */ +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* Called during the register initialisation */ + void (*init)(struct max3107_port *s); + /* Called when the port is found and configured */ + int (*configure)(struct max3107_port *s); + /* HW suspend function */ + void (*hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); +extern void max3107_hw_susp(struct max3107_port *s, int suspend); +extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); +extern int max3107_remove(struct spi_device *spi); +extern int max3107_suspend(struct spi_device *spi, pm_message_t state); +extern int max3107_resume(struct spi_device *spi); + #endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3292816..9ddc866 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -186,6 +186,10 @@ #define PORT_ALTERA_JTAGUART 91 #define PORT_ALTERA_UART 92 +/* MAX3107 */ +#define PORT_MAX3107 94 + + #ifdef __KERNEL__ #include -- cgit v0.10.2 From 2b50d24760a7c0b62180e6fb5a44c2ce3db66abd Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Tue, 29 Jun 2010 14:15:09 +0400 Subject: tty_io: remove casts from void* Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 4c4030c..0350c42 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -893,7 +893,7 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, struct inode *inode; struct tty_ldisc *ld; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; inode = file->f_path.dentry->d_inode; if (tty_paranoia_check(tty, inode, "tty_read")) return -EIO; @@ -1070,7 +1070,7 @@ static ssize_t tty_write(struct file *file, const char __user *buf, ssize_t ret; struct tty_ldisc *ld; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; if (tty_paranoia_check(tty, inode, "tty_write")) return -EIO; if (!tty || !tty->ops->write || @@ -1513,7 +1513,7 @@ int tty_release(struct inode *inode, struct file *filp) int idx; char buf[64]; - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, inode, "tty_release_dev")) return 0; @@ -1920,7 +1920,7 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait) struct tty_ldisc *ld; int ret = 0; - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll")) return 0; @@ -1937,7 +1937,7 @@ static int __tty_fasync(int fd, struct file *filp, int on) unsigned long flags; int retval = 0; - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync")) goto out; @@ -2497,7 +2497,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct tty_ldisc *ld; struct inode *inode = file->f_dentry->d_inode; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; -- cgit v0.10.2 From 75e0b946cf2fef14236ff999b6d7eacbae2034b0 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Sat, 10 Jul 2010 18:57:56 -0300 Subject: vt: Fix warning: statement with no effect due to vt_kern.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using: gcc (GCC) 4.5.0 20100610 (prerelease) with CONFIG_CONSOLE_TRANSLATIONS=n, the following warnings are seen: drivers/char/vt_ioctl.c: In function ‘vt_ioctl’: drivers/char/vt_ioctl.c:1309:4: warning: statement with no effect drivers/char/vt.c: In function ‘vc_allocate’: drivers/char/vt.c:774:3: warning: statement with no effect drivers/video/console/vgacon.c: In function ‘vgacon_init’: drivers/video/console/vgacon.c:587:3: warning: statement with no effect drivers/video/console/vgacon.c: In function ‘vgacon_deinit’: drivers/video/console/vgacon.c:606:2: warning: statement with no effect drivers/video/console/fbcon.c: In function ‘fbcon_init’: drivers/video/console/fbcon.c:1087:3: warning: statement with no effect drivers/video/console/fbcon.c:1089:3: warning: statement with no effect drivers/video/console/fbcon.c: In function ‘fbcon_set_disp’: drivers/video/console/fbcon.c:1369:3: warning: statement with no effect drivers/video/console/fbcon.c:1371:3: warning: statement with no effect This is because several functions in include/linux/vt_kern.h are defined to (0). Convert them to static inline functions to silence the warnings and gain a bit of type safety. Signed-off-by: Kevin Winchester Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 56cce34..6625cc1 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -76,17 +76,52 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define vc_translate(vc, c) ((vc)->vc_translate[(c) | \ ((vc)->vc_toggle_meta ? 0x80 : 0)]) #else -#define con_set_trans_old(arg) (0) -#define con_get_trans_old(arg) (-EINVAL) -#define con_set_trans_new(arg) (0) -#define con_get_trans_new(arg) (-EINVAL) -#define con_clear_unimap(vc, ui) (0) -#define con_set_unimap(vc, ct, list) (0) -#define con_set_default_unimap(vc) (0) -#define con_copy_unimap(d, s) (0) -#define con_get_unimap(vc, ct, uct, list) (-EINVAL) -#define con_free_unimap(vc) do { ; } while (0) -#define con_protect_unimap(vc, rdonly) do { ; } while (0) +static inline int con_set_trans_old(unsigned char __user *table) +{ + return 0; +} +static inline int con_get_trans_old(unsigned char __user *table) +{ + return -EINVAL; +} +static inline int con_set_trans_new(unsigned short __user *table) +{ + return 0; +} +static inline int con_get_trans_new(unsigned short __user *table) +{ + return -EINVAL; +} +static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui) +{ + return 0; +} +static inline +int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) +{ + return 0; +} +static inline +int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, + struct unipair __user *list) +{ + return -EINVAL; +} +static inline int con_set_default_unimap(struct vc_data *vc) +{ + return 0; +} +static inline void con_free_unimap(struct vc_data *vc) +{ +} +static inline void con_protect_unimap(struct vc_data *vc, int rdonly) +{ +} +static inline +int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc) +{ + return 0; +} #define vc_translate(vc, c) (c) #endif -- cgit v0.10.2 From 078dee2d298d003f19203b120b7438beea681e60 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Wed, 14 Jul 2010 22:04:42 +0400 Subject: serial: crisv10: formatting of pointers in printk() Use %p instead of %08x in printk(). Signed-off-by: Kulikov Vasiliy Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 5696710..c856905 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -4533,8 +4533,8 @@ static int __init rs_init(void) INIT_WORK(&info->work, do_softint); if (info->enabled) { - printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", - serial_driver->name, info->line, (unsigned int)info->ioport); + printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", + serial_driver->name, info->line, info->ioport); } } #ifdef CONFIG_ETRAX_FAST_TIMER -- cgit v0.10.2 From e8dd4757a6cf0a8909148a61b89fa3a6d4f9b3ee Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 20 Jul 2010 15:26:10 -0700 Subject: serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes ERROR: code indent should use tabs where possible #32: FILE: drivers/serial/altera_uart.c:397: +^I ALTERA_UART_STATUS_TRDY_MSK))$ total: 1 errors, 0 warnings, 39 lines checked ./patches/altera_uart-simplify-altera_uart_console_putc.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches This fix got lost when someone merged "altera_uart: simplify altera_uart_console_putc()". Please don't lose fixes. Please don't write of mere patches which have trivial checkpatch errors. Cc: Tobias Klauser Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 0f11896..f8d8a00 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -394,7 +394,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) static void altera_uart_console_putc(struct uart_port *port, const char c) { while (!(readl(port->membase + ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK)) + ALTERA_UART_STATUS_TRDY_MSK)) cpu_relax(); writel(c, port->membase + ALTERA_UART_TXDATA_REG); -- cgit v0.10.2 From 93e3d58284626ff6466f9c3dac8800cd6f8079c6 Mon Sep 17 00:00:00 2001 From: John Villalovos Date: Tue, 20 Jul 2010 15:26:46 -0700 Subject: serial: fix missing bit coverage of ASYNC_FLAGS It seems that currently ASYNC_FLAGS is one bit short of covering all the bits of the ASYNC user flags. In particular it does not cover the ASYNC_AUTOPROBE bit. ASYNCB_LAST_USER and ASYNCB_AUTOPROBE are both equal to 15. Therefore: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 0111 1111 1111 1111 So ASYNC_FLAGS is not covering the ASYNC_AUTOPROBE bit. This patch fixes the issue and with the patch the values will be: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 1111 1111 1111 1111 As a side note, doing a "git grep" I didn't find any use of ASYNC_AUTOPROBE or ASYNCB_AUTOPROBE in the kernel, besides this include file. Signed-off-by: John Villalovos Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/serial.h b/include/linux/serial.h index c8613c3..c3b45ad 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -151,7 +151,7 @@ struct serial_uart_config { #define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) #define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) -#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1) +#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) #define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \ ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) -- cgit v0.10.2 From 1b6331848b69d1ed165a6bdc75c4046d68767563 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Tue, 20 Jul 2010 15:26:47 -0700 Subject: serial: general fixes in the serial_rs485 structure Fix several issues related to the RS485 interface: - It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the serial_rs485 structure (even if "delay_rts_before_send" was existing) - It adds a further "delay_rts_after_send" field for those drivers that can have a delay after send (e.g., atmel_serial) - It fixes the usage of the structure in the atmel_serial driver (where "delay_rts_before_send" should be used instead of "delay_rts_after_send"). Signed-off-by: Claudio Scordino Signed-off-by: Bernhard Roth Cc: Philippe De Muyter Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index a182def..3892666 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -217,7 +217,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - UART_PUT_TTGR(port, rs485conf->delay_rts_before_send); + if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -292,7 +293,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -1211,7 +1214,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); diff --git a/include/linux/serial.h b/include/linux/serial.h index c3b45ad..ef91406 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -210,8 +210,10 @@ struct serial_rs485 { #define SER_RS485_ENABLED (1 << 0) #define SER_RS485_RTS_ON_SEND (1 << 1) #define SER_RS485_RTS_AFTER_SEND (1 << 2) +#define SER_RS485_RTS_BEFORE_SEND (1 << 3) __u32 delay_rts_before_send; /* Milliseconds */ - __u32 padding[6]; /* Memory is cheap, new structs + __u32 delay_rts_after_send; /* Milliseconds */ + __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; -- cgit v0.10.2 From 0ac8382e9cfdd723445692fc97aaa4643929750d Mon Sep 17 00:00:00 2001 From: Yury Georgievskiy Date: Tue, 20 Jul 2010 15:26:50 -0700 Subject: serial: mcf: don't take spinlocks in already protected functions Don't take the port spinlock in uart functions where the serial core already takes care of locking/unlocking them. The code would actually lock up on architectures where spinlocks are implemented. Also protect calling mcf_rx_chars/mcf_tx_chars in the interrupt handler by the port spinlock and use IRQ_RETVAL to return from isr. [akpm@linux-foundation.org: make irq-handler return value more explicit] Signed-off-by: Yury Georgievskiy Cc: Alan Cox Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b5aaef9..3394b7c 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -70,16 +70,14 @@ static unsigned int mcf_tx_empty(struct uart_port *port) static unsigned int mcf_get_mctrl(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; unsigned int sigs; - spin_lock_irqsave(&port->lock, flags); sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; sigs |= (pp->sigs & TIOCM_RTS); sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); - spin_unlock_irqrestore(&port->lock, flags); + return sigs; } @@ -88,16 +86,13 @@ static unsigned int mcf_get_mctrl(struct uart_port *port) static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->sigs = sigs; mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); if (sigs & TIOCM_RTS) writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); else writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -105,12 +100,9 @@ static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) static void mcf_start_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr |= MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -118,12 +110,9 @@ static void mcf_start_tx(struct uart_port *port) static void mcf_stop_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr &= ~MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -131,12 +120,9 @@ static void mcf_stop_tx(struct uart_port *port) static void mcf_stop_rx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr &= ~MCFUART_UIR_RXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -366,13 +352,22 @@ static irqreturn_t mcf_interrupt(int irq, void *data) struct uart_port *port = data; struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned int isr; + irqreturn_t ret = IRQ_NONE; isr = readb(port->membase + MCFUART_UISR) & pp->imr; - if (isr & MCFUART_UIR_RXREADY) + + spin_lock(&port->lock); + if (isr & MCFUART_UIR_RXREADY) { mcf_rx_chars(pp); - if (isr & MCFUART_UIR_TXREADY) + ret = IRQ_HANDLED; + } + if (isr & MCFUART_UIR_TXREADY) { mcf_tx_chars(pp); - return IRQ_HANDLED; + ret = IRQ_HANDLED; + } + spin_unlock(&port->lock); + + return ret; } /****************************************************************************/ -- cgit v0.10.2 From 1917ac76e023339c73844bec775375b147f57ac7 Mon Sep 17 00:00:00 2001 From: Samium Gromoff <_deepfire@feelingofgreen.ru> Date: Tue, 20 Jul 2010 15:26:51 -0700 Subject: serial: MMIO32 support for 8250_early.c Provide MMIO32 support in 8250_early (aka earlycon) [randy.dunlap@oracle.com: fix printk format warnings] [akpm@linux-foundation.org: fix printk args some more] Signed-off-by: Samium Gromoff <_deepfire@feelingofgreen.ru> Signed-off-by: Randy Dunlap Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 44f6b19..d529b13 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -681,8 +681,11 @@ and is between 256 and 4096 characters. It is defined in the file earlycon= [KNL] Output early console device and options. uart[8250],io,[,options] uart[8250],mmio,[,options] + uart[8250],mmio32,[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address. + MMIO inter-register address stride is either 8bit (mmio) + or 32bit (mmio32). The options are the same as for ttyS, above. earlyprintk= [X86,SH,BLACKFIN] diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index f279745..b745792 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -19,9 +19,11 @@ * The user can specify the device directly, e.g., * earlycon=uart8250,io,0x3f8,9600n8 * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 * or * console=uart8250,io,0x3f8,9600n8 * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 */ #include @@ -48,18 +50,31 @@ static struct early_serial8250_device early_device; static unsigned int __init serial_in(struct uart_port *port, int offset) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: return readb(port->membase + offset); - else + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: return inb(port->iobase + offset); + default: + return 0; + } } static void __init serial_out(struct uart_port *port, int offset, int value) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: writeb(value, port->membase + offset); - else + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: outb(value, port->iobase + offset); + break; + } } #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) @@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device, char *options) { struct uart_port *port = &device->port; - int mmio, length; + int mmio, mmio32, length; if (!options) return -ENODEV; port->uartclk = BASE_BAUD * 16; - if (!strncmp(options, "mmio,", 5)) { - port->iotype = UPIO_MEM; - port->mapbase = simple_strtoul(options + 5, &options, 0); + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; #ifdef CONFIG_FIX_EARLYCON_MEM set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK); @@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device, if (!port->membase) { printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", __func__, - (unsigned long long)port->mapbase); + (unsigned long long) port->mapbase); return -ENOMEM; } #endif - mmio = 1; } else if (!strncmp(options, "io,", 3)) { port->iotype = UPIO_PORT; port->iobase = simple_strtoul(options + 3, &options, 0); @@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device, device->baud); } - printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n", - mmio ? "MMIO" : "I/O port", - mmio ? (unsigned long long) port->mapbase - : (unsigned long long) port->iobase, - device->options); + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llu (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lu (options '%s')\n", + port->iobase, + device->options); + return 0; } -- cgit v0.10.2 From b1a6f24394d44b7bd2c8ec3f301a5eda72ce462f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 20 Jul 2010 15:26:53 -0700 Subject: timbuart: use __devinit and __devexit macros for probe and remove MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the probe and remove functions to the devinit and devexit sections. Signed-off-by: Richard Röjfors Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 67ca642..1f36b7e 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -423,7 +423,7 @@ static struct uart_driver timbuart_driver = { .nr = 1 }; -static int timbuart_probe(struct platform_device *dev) +static int __devinit timbuart_probe(struct platform_device *dev) { int err, irq; struct timbuart_port *uart; @@ -489,7 +489,7 @@ err_mem: return err; } -static int timbuart_remove(struct platform_device *dev) +static int __devexit timbuart_remove(struct platform_device *dev) { struct timbuart_port *uart = platform_get_drvdata(dev); @@ -507,7 +507,7 @@ static struct platform_driver timbuart_platform_driver = { .owner = THIS_MODULE, }, .probe = timbuart_probe, - .remove = timbuart_remove, + .remove = __devexit_p(timbuart_remove), }; /*--------------------------------------------------------------------------*/ -- cgit v0.10.2 From f5e92c3f9ca148181f1baaec8db271845b2420f0 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Tue, 20 Jul 2010 15:26:54 -0700 Subject: serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) doesn't exist in Kconfig, therefore remove all references to it from the source code. Signed-off-by: Christoph Egger Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index d8204f4..7356a56 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -98,19 +98,13 @@ static void change_speed(struct m68k_serial *info); * Setup for console. Argument comes from the boot command line. */ -#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ) -#define CONSOLE_BAUD_RATE 115200 -#define DEFAULT_CBAUD B115200 -#else - /* (es) */ - /* note: this is messy, but it works, again, perhaps defined somewhere else?*/ - #ifdef CONFIG_M68VZ328 - #define CONSOLE_BAUD_RATE 19200 - #define DEFAULT_CBAUD B19200 - #endif - /* (/es) */ +/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ +#ifdef CONFIG_M68VZ328 +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 #endif + #ifndef CONSOLE_BAUD_RATE #define CONSOLE_BAUD_RATE 9600 #define DEFAULT_CBAUD B9600 -- cgit v0.10.2 From e847003f00d5eca3e3b3a6a1199f82b51293faf6 Mon Sep 17 00:00:00 2001 From: Lytochkin Boris Date: Mon, 26 Jul 2010 10:02:26 +0400 Subject: serial: add support for OX16PCI958 card Signed-off-by: Lytochkin Boris Tested-by: Lytochkin Boris Signed-off-by: Alexander Beregalov Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 746a446..53be4d3 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_800E 0xA014 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1542,6 +1543,8 @@ enum pci_board_num_t { pbn_b2_4_921600, pbn_b2_8_921600, + pbn_b2_8_1152000, + pbn_b2_bt_1_115200, pbn_b2_bt_2_115200, pbn_b2_bt_4_115200, @@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 8, }, + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + [pbn_b2_bt_1_115200] = { .flags = FL_BASE2|FL_BASE_BARS, .num_ports = 1, @@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, /* * Oxford Semiconductor Inc. Tornado PCI express device range. -- cgit v0.10.2 From 464eb8f596fcbdadcfbbdb4a84847ffcb93cc4dd Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Fri, 23 Jul 2010 20:34:53 +0400 Subject: mxser: remove unnesesary NULL check mxser_transmit_chars(tty, port) is called only from mxser_interrupt(). NULL check is performed in mxser_interrupt() so it is redundant here. Signed-off-by: Kulikov Vasiliy Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index d2692d4..3fc89da 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -2193,7 +2193,7 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port port->mon_data.up_txcnt += (cnt - port->xmit_cnt); port->icount.tx += (cnt - port->xmit_cnt); - if (port->xmit_cnt < WAKEUP_CHARS && tty) + if (port->xmit_cnt < WAKEUP_CHARS) tty_wakeup(tty); if (port->xmit_cnt <= 0) { -- cgit v0.10.2 From d843fc6e9dc9bee7061b6833594860ea93ad98e1 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 27 Jul 2010 08:20:22 +0100 Subject: hsu: driver for Medfield High Speed UART device This is a PCI & UART driver, which suppors both PIO and DMA mode UART operation. It has 3 identical UART ports and one internal DMA controller. Current FW will export 4 pci devices for hsu: 3 uart ports and 1 dma controller, each has one IRQ line. And we need to discuss the device model, one PCI device covering whole HSU should be a better model, but there is a problem of how to export the 4 IRQs info Current driver set the highest baud rate to 2746800bps, which is easy to scale down to 115200/230400.... To suport higher baud rate, we need add special process, change DLAB/DLH/PS/DIV/MUL registers all together. 921600 is the highest baud rate that has been tested with Bluetooth modem connected to HSU port 0. Will test more when there is right BT firmware. Current version contains several work around for A0's Silicon bugs Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c34c217..a22e60c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -724,6 +724,16 @@ config MRST_MAX3110_IRQ help This has to be enabled after Moorestown GPIO driver is loaded +config SERIAL_MFD_HSU + tristate "Medfield High Speed UART support" + depends on PCI + select SERIAL_CORE + +config SERIAL_MFD_HSU_CONSOLE + boolean "Medfile HSU serial console support" + depends on SERIAL_MFD_HSU=y + select SERIAL_CORE_CONSOLE + config SERIAL_BFIN tristate "Blackfin serial port support" depends on BLACKFIN diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 424067a..1ca4fd5 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -87,3 +87,4 @@ obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o +obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c new file mode 100644 index 0000000..300dcb13 --- /dev/null +++ b/drivers/serial/mfd.c @@ -0,0 +1,1488 @@ +/* + * mfd.c: driver for High Speed UART device of Intel Medfield platform + * + * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + + +/* Notes: + * 1. there should be 2 types of register access method, one for + * UART ports, the other for the general purpose registers + * + * 2. It used to have a Irda port, but was defeatured recently + * + * 3. Based on the info from HSU MAS, 0/1 channel are assigned to + * port0, 2/3 chan to port 1, 4/5 chan to port 3. Even number + * chan will be read, odd chan for write + * + * 4. HUS supports both the 64B and 16B FIFO version, but this driver + * will only use 64B version + * + * 5. In A0 stepping, UART will not support TX half empty flag, thus + * need add a #ifdef judgement + * + * 6. One more bug for A0, the loopback mode won't support AFC + * auto-flow control + * + * 7. HSU has some special FCR control bits, we add it to serial_reg.h + * + * 8. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always asserted, + * only when the HW is reset the DDCD and DDSR will be triggered + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MFD_HSU_A0_STEPPING 1 + +#define HSU_DMA_BUF_SIZE 2048 + +#define chan_readl(chan, offset) readl(chan->reg + offset) +#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) + +#define mfd_readl(obj, offset) readl(obj->reg + offset) +#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) + +struct hsu_dma_buffer { + u8 *buf; + dma_addr_t dma_addr; + u32 dma_size; + u32 ofs; +}; + +struct hsu_dma_chan { + u32 id; + u32 dirt; /* to or from device */ + struct uart_hsu_port *uport; + void __iomem *reg; +}; + +struct uart_hsu_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + char name[12]; + int index; + struct device *dev; + + struct hsu_dma_chan *txc; + struct hsu_dma_chan *rxc; + struct hsu_dma_buffer txbuf; + struct hsu_dma_buffer rxbuf; + int use_dma; /* flag for DMA/PIO */ + int running; + int dma_tx_on; +}; + +/* Top level data structure of HSU */ +struct hsu_port { + struct pci_device *pdev; + + void __iomem *reg; + unsigned long paddr; + unsigned long iolen; + u32 irq; + + struct uart_hsu_port port[3]; + struct hsu_dma_chan chans[10]; + +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif +}; + +static inline void hexdump(char *str, u8 *addr, int cnt) +{ + int i; + + for (i = 0; i < cnt; i += 8) { + printk("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x", + addr[i], addr[i+1], addr[i+2], addr[i+3], + addr[i+4], addr[i+5], addr[i+6], addr[i+7]); + printk("\n"); + } +} + +static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) +{ + unsigned int val; + + if (offset > UART_MSR) { + offset <<= 2; + val = readl(up->port.membase + offset); + } else + val = (unsigned int)readb(up->port.membase + offset); + + return val; +} + +static inline void serial_out(struct uart_hsu_port *up, int offset, int value) +{ + if (offset > UART_MSR) { + offset <<= 2; + writel(value, up->port.membase + offset); + } else { + unsigned char val = value & 0xff; + writeb(val, up->port.membase + offset); + } +} + +#ifdef CONFIG_DEBUG_FS + +#define HSU_REGS_BUFSIZE 1024 + +static int hsu_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct uart_hsu_port *up = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU port[%d] regs:\n", up->index); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static ssize_t dma_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct hsu_dma_chan *chan = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU DMA channel [%d] regs:\n", chan->id); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = port_show_regs, +}; + +static const struct file_operations dma_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = dma_show_regs, +}; + +static int hsu_debugfs_init(struct hsu_port *hsu) +{ + int i; + char name[32]; + + hsu->debugfs = debugfs_create_dir("hsu", NULL); + if (!hsu->debugfs) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + snprintf(name, sizeof(name), "port_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); + } + + for (i = 0; i < 6; i++) { + snprintf(name, sizeof(name), "dma_chan_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); + } + + return 0; +} + +static void hsu_debugfs_remove(struct hsu_port *hsu) +{ + if (hsu->debugfs) + debugfs_remove_recursive(hsu->debugfs); +} + +#else +static inline int hsu_debugfs_init(struct hsu_port *hsu) +{ + return 0; +} + +static inline void hsu_debugfs_remove(struct hsu_port *hsu) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void serial_hsu_enable_ms(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +void hsu_dma_tx(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + struct hsu_dma_buffer *dbuf = &up->txbuf; + int count; + + /* test_and_set_bit may be better, but anyway it's in lock protected mode */ + if (up->dma_tx_on) + return; + + /* Update the circ buf info */ + xmit->tail += dbuf->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + up->port.icount.tx += dbuf->ofs; + dbuf->ofs = 0; + + /* Disable the channel */ + chan_writel(up->txc, HSU_CH_CR, 0x0); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { + dma_sync_single_for_device(up->port.dev, + dbuf->dma_addr, + dbuf->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + dbuf->ofs = count; + + /* Reprogram the channel */ + chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); + chan_writel(up->txc, HSU_CH_D0TSR, count); + + /* Reenable the channel */ + chan_writel(up->txc, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24)); + + WARN(chan_readl(up->txc, HSU_CH_CR) & 0x1, + "TX channel has already be started!!\n"); + up->dma_tx_on = 1; + chan_writel(up->txc, HSU_CH_CR, 0x1); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +/* The buffer is already cache coherent */ +void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) +{ + /* Need start RX dma channel here */ + dbuf->ofs = 0; + + chan_writel(rxc, HSU_CH_BSR, 32); + chan_writel(rxc, HSU_CH_MOTSR, 4); + + chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + chan_writel(rxc, HSU_CH_CR, 0x3); +} + +/* Protected by spin_lock_irqsave(port->lock) */ +static void serial_hsu_start_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + if (up->use_dma) { + hsu_dma_tx(up); + } else if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_hsu_stop_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *txc = up->txc; + + if (up->use_dma) + chan_writel(txc, HSU_CH_CR, 0x0); + else if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* This is always called in spinlock protected mode, so + * modify timeout timer is safe here */ +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +{ + struct hsu_dma_buffer *dbuf = &up->rxbuf; + struct hsu_dma_chan *chan = up->rxc; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; + int count; + + if (!tty) + return; + + /* + * first need to know how many is already transferred, + * then check if its a timeout DMA irq, and return + * the trail bytes out, push them up and reenable the + * channel, better to use 2 descriptors at the same time + */ + + /* timeout IRQ, need wait some time, see Errata 2 */ + if (int_sts & 0xf00) + udelay(2); + + /* Stop the channel */ + chan_writel(chan, HSU_CH_CR, 0x0); + + /* We can use 2 ways to calc the actual transfer len */ + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + + if (!count) + return; + + dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* + * head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + tty_insert_flip_string(tty, dbuf->buf, count); + port->icount.rx += count; + + dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* Reprogram the channel */ + chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(chan, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + chan_writel(chan, HSU_CH_CR, 0x3); + + tty_flip_buffer_push(tty); +} + +static void serial_hsu_stop_rx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *chan = up->rxc; + + if (up->use_dma) + chan_writel(chan, HSU_CH_CR, 0x2); + else { + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + } +} + +/* + * if there is error flag, should we just reset the FIFO or keeps + * working on it + */ +static inline void receive_chars(struct uart_hsu_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + unsigned int max_count = 256; + + if (!tty) + return; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + + dev_warn(up->dev, "We really rush into ERR/BI case" + "status = 0x%02x", *status); + /* For statistics only */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* Mask off conditions which should be ignored. */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (up->port.cons && + up->port.cons->index == up->port.line) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && max_count--); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + int i = 0; /* for debug use */ + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_hsu_stop_tx(&up->port); + return; + } + +#ifndef MFD_HSU_A0_STEPPING + count = up->port.fifosize / 2; +#else + /* + * A0 only supports fully empty IRQ, and the first char written + * into it won't clear the EMPT bit, so we may need be cautious + * by useing a shorter buffer + */ + /* count = up->port.fifosize; */ + count = up->port.fifosize - 4; +#endif + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + i++; + + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_hsu_stop_tx(&up->port); +} + +static inline void check_modem_status(struct uart_hsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + /* We may only get DDCD when HW init and reset */ + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + /* will start/stop_tx accordingly */ + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static irqreturn_t port_irq(int irq, void *dev_id) +{ + struct uart_hsu_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + if (unlikely(!up->running)) + return IRQ_NONE; + + if (up->use_dma) { + lsr = serial_in(up, UART_LSR); + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) + dev_warn(up->dev, + "Got lsr irq while using DMA, lsr = 0x%2x\n", + lsr); + check_modem_status(up); + return IRQ_HANDLED; + } + + spin_lock_irqsave(&up->port.lock, flags); + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_NONE; + } + + lsr = serial_in(up, UART_LSR); + + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + + /* lsr will be renewed during the receive_chars */ + if (lsr & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; +} + +static inline void dma_chan_irq(struct hsu_dma_chan *chan) +{ + struct uart_hsu_port *up = chan->uport; + unsigned long flags; + u32 int_sts; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!up->use_dma || !up->running) + goto exit; + + /* + * No matter what situation, need read clear the IRQ status + * There is a bug, see Errata 5, HSD 2900918 + */ + int_sts = chan_readl(chan, HSU_CH_SR); + + /* Rx channel */ + if (chan->dirt == DMA_FROM_DEVICE) + hsu_dma_rx(up, int_sts); + + /* Tx channel */ + if (chan->dirt == DMA_TO_DEVICE) { + /* dma for irq should be done */ + chan_writel(chan, HSU_CH_CR, 0x0); + up->dma_tx_on = 0; + hsu_dma_tx(up); + } + +exit: + spin_unlock_irqrestore(&up->port.lock, flags); + return; +} + +static irqreturn_t dma_irq(int irq, void *dev_id) +{ + struct hsu_port *hsu = dev_id; + u32 int_sts, i; + + int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); + + /* Currently we only have 6 channels may be used */ + for (i = 0; i < 6; i++) { + if (int_sts & 0x1) + dma_chan_irq(&hsu->chans[i]); + int_sts >>= 1; + } + + return IRQ_HANDLED; +} + +static unsigned int serial_hsu_tx_empty(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_hsu_get_mctrl(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_hsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * What special to do: + * 1. chose the 64B fifo mode + * 2. make sure not to select half empty mode for A0 stepping + * 3. start dma or pio depends on configuration + * 4. we only allocate dma memory when needed + */ +static int serial_hsu_startup(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* Clear the interrupt registers. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* Now, initialize the UART, default is 8n1 */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + if (!up->use_dma) + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; + else + up->ier = 0; + serial_out(up, UART_IER, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* DMA init */ + /* When use DMA, TX/RX's FIFO and IRQ should be disabled */ + if (up->use_dma) { + struct hsu_dma_buffer *dbuf; + struct circ_buf *xmit = &port->state->xmit; + + up->dma_tx_on = 0; + + /* First allocate the RX buffer */ + dbuf = &up->rxbuf; + dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); + if (!dbuf->buf) { + up->use_dma = 0; + goto exit; + } + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + HSU_DMA_BUF_SIZE, + DMA_FROM_DEVICE); + dbuf->dma_size = HSU_DMA_BUF_SIZE; + + /* Start the RX channel right now */ + hsu_dma_start_rx_chan(up->rxc, dbuf); + + /* Next init the TX DMA */ + dbuf = &up->txbuf; + dbuf->buf = xmit->buf; + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + dbuf->dma_size = UART_XMIT_SIZE; + + /* This should not be changed all around */ + chan_writel(up->txc, HSU_CH_BSR, 32); + chan_writel(up->txc, HSU_CH_MOTSR, 4); + dbuf->ofs = 0; + } + +exit: + /* And clear the interrupt registers again for luck. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + up->running = 1; + return 0; +} + +static void serial_hsu_shutdown(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + /* Disable interrupts from this port */ + up->ier = 0; + serial_out(up, UART_IER, 0); + up->running = 0; + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Disable break condition and FIFOs */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct tty_struct *tty = port->state->port.tty; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + u32 mul = 0x3600; + u32 ps = 0x10; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + /* CMSPAR isn't supported by this driver */ + if (tty) + tty->termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * For those basic low baud rate we can get the direct + * scalar from 2746800, like 115200 = 2746800/24, for those + * higher baud rate, we have to handle them case by case, + * but DIV reg is never touched as its default value 0x3d09 + */ + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + quot = uart_get_divisor(port, baud); + + switch (baud) { + case 3500000: + mul = 0x3345; + ps = 0xC; + quot = 1; + break; + case 2500000: + mul = 0x2710; + ps = 0x10; + quot = 1; + break; + case 18432000: + mul = 0x2400; + ps = 0x10; + quot = 1; + break; + case 1500000: + mul = 0x1D4C; + ps = 0xc; + quot = 1; + break; + default: + ; + } + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; + + fcr |= UART_FCR_HSU_64B_FIFO; +#ifdef MFD_HSU_A0_STEPPING + /* A0 doesn't support half empty IRQ */ + fcr |= UART_FCR_FULL_EMPT_TXI; +#endif + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* Characters to ignore */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts, disable + * MSI by default + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE | UART_MCR_RTS; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_MUL, mul); /* set MUL */ + serial_out(up, UART_PS, ps); /* set PS */ + up->lcr = cval; /* Save LCR */ + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_hsu_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_hsu_release_port(struct uart_port *port) +{ +} + +static int serial_hsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_hsu_config_port(struct uart_port *port, int flags) +{ +#if 0 + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + up->port.type = PORT_MFD; +#endif +} + +static int +serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* We don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_hsu_type(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + return up->name; +} + +/* Mainly for uart console use */ +static struct uart_hsu_port *serial_hsu_ports[3]; +static struct uart_driver serial_hsu_reg; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* Wait for transmitter & holding register to empty */ +static inline void wait_for_xmitr(struct uart_hsu_port *up) +{ + unsigned int status, tmout = 1000; + + /* Wait up to 1ms for the character to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while (!(status & BOTH_EMPTY)); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_hsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_hsu_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_hsu_port *up = serial_hsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* First save the IER then disable the interrupts */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_hsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static struct console serial_hsu_console; + +static int __init +serial_hsu_console_setup(struct console *co, char *options) +{ + struct uart_hsu_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index == -1 || co->index >= serial_hsu_reg.nr) + co->index = 0; + up = serial_hsu_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(&up->port, co, baud, parity, bits, flow); + + return ret; +} + +static struct console serial_hsu_console = { + .name = "ttyMFD", + .write = serial_hsu_console_write, + .device = uart_console_device, + .setup = serial_hsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = 2, + .data = &serial_hsu_reg, +}; +#endif + +struct uart_ops serial_hsu_pops = { + .tx_empty = serial_hsu_tx_empty, + .set_mctrl = serial_hsu_set_mctrl, + .get_mctrl = serial_hsu_get_mctrl, + .stop_tx = serial_hsu_stop_tx, + .start_tx = serial_hsu_start_tx, + .stop_rx = serial_hsu_stop_rx, + .enable_ms = serial_hsu_enable_ms, + .break_ctl = serial_hsu_break_ctl, + .startup = serial_hsu_startup, + .shutdown = serial_hsu_shutdown, + .set_termios = serial_hsu_set_termios, + .pm = serial_hsu_pm, + .type = serial_hsu_type, + .release_port = serial_hsu_release_port, + .request_port = serial_hsu_request_port, + .config_port = serial_hsu_config_port, + .verify_port = serial_hsu_verify_port, +}; + +static struct uart_driver serial_hsu_reg = { + .owner = THIS_MODULE, + .driver_name = "MFD serial", + .dev_name = "ttyMFD", + .major = TTY_MAJOR, + .minor = 128, + .nr = 3, +}; + +#ifdef CONFIG_PM +static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct uart_hsu_port *up; + + up = pci_get_drvdata(pdev); + if (!up) + return 0; + + uart_suspend_port(&serial_hsu_reg, &up->port); + + return 0; +} + +static int serial_hsu_resume(struct pci_dev *pdev) +{ + struct uart_hsu_port *up; + + up = pci_get_drvdata(pdev); + if (!up) + return 0; + uart_resume_port(&serial_hsu_reg, &up->port); + return 0; +} +#else +#define serial_hsu_suspend NULL +#define serial_hsu_resume NULL +#endif + +/* temp global pointer before we settle down on using one or four PCI dev */ +static struct hsu_port *phsu; + +static int serial_hsu_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uart_hsu_port *uport; + int index, ret; + + printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + switch (pdev->device) { + case 0x081B: + index = 0; + break; + case 0x081C: + index = 1; + break; + case 0x081D: + index = 2; + break; + case 0x081E: + /* internal DMA controller */ + index = 3; + break; + default: + dev_err(&pdev->dev, "HSU: out of index!"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (index == 3) { + /* DMA controller */ + ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + pci_set_drvdata(pdev, phsu); + } else { + /* UART port 0~2 */ + uport = &phsu->port[index]; + uport->port.irq = pdev->irq; + uport->port.dev = &pdev->dev; + uport->dev = &pdev->dev; + + ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + uart_add_one_port(&serial_hsu_reg, &uport->port); + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (index == 2) { + register_console(&serial_hsu_console); + uport->port.cons = &serial_hsu_console; + } +#endif + pci_set_drvdata(pdev, uport); + } + + return 0; + +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void hsu_global_init(void) +{ + struct hsu_port *hsu; + struct uart_hsu_port *uport; + struct hsu_dma_chan *dchan; + int i, ret; + + hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); + if (!hsu) + return; + + /* Get basic io resource and map it */ + hsu->paddr = 0xffa28000; + hsu->iolen = 0x1000; + + if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) + pr_warning("HSU: error in request mem region\n"); + + hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); + if (!hsu->reg) { + pr_err("HSU: error in ioremap\n"); + ret = -ENOMEM; + goto err_free_region; + } + + /* Initialise the 3 UART ports */ + uport = hsu->port; + for (i = 0; i < 3; i++) { + uport->port.type = PORT_MFD; + uport->port.iotype = UPIO_MEM; + uport->port.mapbase = (resource_size_t)hsu->paddr + + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + + sprintf(uport->name, "hsu_port%d", i); + uport->port.fifosize = 64; + uport->port.ops = &serial_hsu_pops; + uport->port.line = i; + uport->port.flags = UPF_IOREMAP; + /* make the maxim support rate to 2746800 bps */ + uport->port.uartclk = 115200 * 24 * 16; + + uport->running = 0; + uport->txc = &hsu->chans[i * 2]; + uport->rxc = &hsu->chans[i * 2 + 1]; + + serial_hsu_ports[i] = uport; + uport->index = i; + uport++; + } + + /* Initialise 6 dma channels */ + dchan = hsu->chans; + for (i = 0; i < 6; i++) { + dchan->id = i; + dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + dchan->uport = &hsu->port[i/2]; + dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + + i * HSU_DMA_CHANS_REG_LENGTH; + dchan++; + } + + phsu = hsu; + + hsu_debugfs_init(hsu); + return; + +err_free_region: + release_mem_region(hsu->paddr, hsu->iolen); + kfree(hsu); + return; +} + +static void serial_hsu_remove(struct pci_dev *pdev) +{ + struct hsu_port *hsu; + int i; + + hsu = pci_get_drvdata(pdev); + if (!hsu) + return; + + for (i = 0; i < 3; i++) + uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port); + + pci_set_drvdata(pdev, NULL); + free_irq(hsu->irq, hsu); + pci_disable_device(pdev); +} + +/* First 3 are UART ports, and the 4th is the DMA */ +static const struct pci_device_id pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, + {}, +}; + +static struct pci_driver hsu_pci_driver = { + .name = "HSU serial", + .id_table = pci_ids, + .probe = serial_hsu_probe, + .remove = __devexit_p(serial_hsu_remove), + .suspend = serial_hsu_suspend, + .resume = serial_hsu_resume, +}; + +static int __init hsu_pci_init(void) +{ + int ret; + + hsu_global_init(); + + ret = uart_register_driver(&serial_hsu_reg); + if (ret) + return ret; + + return pci_register_driver(&hsu_pci_driver); +} + +static void __exit hsu_pci_exit(void) +{ + pci_unregister_driver(&hsu_pci_driver); + uart_unregister_driver(&serial_hsu_reg); + + hsu_debugfs_remove(phsu); + + kfree(phsu); +} + +module_init(hsu_pci_init); +module_exit(hsu_pci_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:medfield-hsu"); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 9ddc866..f8fce35 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -189,6 +189,8 @@ /* MAX3107 */ #define PORT_MAX3107 94 +/* High Speed UART for Medfield */ +#define PORT_MFD 95 #ifdef __KERNEL__ diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h new file mode 100644 index 0000000..2b071e0 --- /dev/null +++ b/include/linux/serial_mfd.h @@ -0,0 +1,47 @@ +#ifndef _SERIAL_MFD_H_ +#define _SERIAL_MFD_H_ + +/* HW register offset definition */ +#define UART_FOR 0x08 +#define UART_PS 0x0C +#define UART_MUL 0x0D +#define UART_DIV 0x0E + +#define HSU_GBL_IEN 0x0 +#define HSU_GBL_IST 0x4 + +#define HSU_GBL_INT_BIT_PORT0 0x0 +#define HSU_GBL_INT_BIT_PORT1 0x1 +#define HSU_GBL_INT_BIT_PORT2 0x2 +#define HSU_GBL_INT_BIT_IRI 0x3 +#define HSU_GBL_INT_BIT_HDLC 0x4 +#define HSU_GBL_INT_BIT_DMA 0x5 + +#define HSU_GBL_ISR 0x8 +#define HSU_GBL_DMASR 0x400 +#define HSU_GBL_DMAISR 0x404 + +#define HSU_PORT_REG_OFFSET 0x80 +#define HSU_PORT0_REG_OFFSET 0x80 +#define HSU_PORT1_REG_OFFSET 0x100 +#define HSU_PORT2_REG_OFFSET 0x180 +#define HSU_PORT_REG_LENGTH 0x80 + +#define HSU_DMA_CHANS_REG_OFFSET 0x500 +#define HSU_DMA_CHANS_REG_LENGTH 0x40 + +#define HSU_CH_SR 0x0 /* channel status reg */ +#define HSU_CH_CR 0x4 /* control reg */ +#define HSU_CH_DCR 0x8 /* descriptor control reg */ +#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */ +#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */ +#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */ +#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */ +#define HSU_CH_D1SAR 0x28 +#define HSU_CH_D1TSR 0x2C +#define HSU_CH_D2SAR 0x30 +#define HSU_CH_D2TSR 0x34 +#define HSU_CH_D3SAR 0x38 +#define HSU_CH_D3TSR 0x3C + +#endif diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index cf9327c..c7a0ce1 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -221,8 +221,24 @@ #define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ #define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ +/* + * Intel MID on-chip HSU (High Speed UART) defined bits + */ +#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ +#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ +#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ + +#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ +#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ +#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ +#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ +#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ +#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ +#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ /* * These register definitions are for the 16C950 -- cgit v0.10.2 From 669b7a0938e759097c150400cd36bd49befaf5bb Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 27 Jul 2010 08:20:32 +0100 Subject: hsu: add a periodic timer to check dma rx channel A general problem for uart rx dma channel is you never know when and how much data will be received, so usually preset it a DMA descriptor with a big size, and rely on DMA RX timeout IRQ to know there is some data in rx channel. For a RX data size of multiple of MOTSR, there will be no timeout IRQ issued, thus OS will never be notified about that. This is a work around for that, current timer frequency is 5 times per second, it should vary according to the baud rate When future silicon version fix the problem, this workaround need be removed Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index 300dcb13..ed2bf6b 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c @@ -64,6 +64,8 @@ #define mfd_readl(obj, offset) readl(obj->reg + offset) #define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) +#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) + struct hsu_dma_buffer { u8 *buf; dma_addr_t dma_addr; @@ -75,7 +77,8 @@ struct hsu_dma_chan { u32 id; u32 dirt; /* to or from device */ struct uart_hsu_port *uport; - void __iomem *reg; + void __iomem *reg; + struct timer_list rx_timer; /* only needed by RX channel */ }; struct uart_hsu_port { @@ -377,6 +380,8 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); chan_writel(rxc, HSU_CH_CR, 0x3); + + mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); } /* Protected by spin_lock_irqsave(port->lock) */ @@ -437,8 +442,13 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) /* We can use 2 ways to calc the actual transfer len */ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - if (!count) + if (!count) { + /* restart the channel before we leave */ + chan_writel(chan, HSU_CH_CR, 0x3); return; + } + + del_timer(&chan->rx_timer); dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, dbuf->dma_size, DMA_FROM_DEVICE); @@ -463,9 +473,12 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) | (0x1 << 16) | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); + tty_flip_buffer_push(tty); + chan_writel(chan, HSU_CH_CR, 0x3); + chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; + add_timer(&chan->rx_timer); - tty_flip_buffer_push(tty); } static void serial_hsu_stop_rx(struct uart_port *port) @@ -893,6 +906,8 @@ static void serial_hsu_shutdown(struct uart_port *port) container_of(port, struct uart_hsu_port, port); unsigned long flags; + del_timer_sync(&up->rxc->rx_timer); + /* Disable interrupts from this port */ up->ier = 0; serial_out(up, UART_IER, 0); @@ -1348,6 +1363,28 @@ err_disable: return ret; } +static void hsu_dma_rx_timeout(unsigned long data) +{ + struct hsu_dma_chan *chan = (void *)data; + struct uart_hsu_port *up = chan->uport; + struct hsu_dma_buffer *dbuf = &up->rxbuf; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + + if (!count) { + mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); + goto exit; + } + + hsu_dma_rx(up, 0); +exit: + spin_unlock_irqrestore(&up->port.lock, flags); +} + static void hsu_global_init(void) { struct hsu_port *hsu; @@ -1409,6 +1446,13 @@ static void hsu_global_init(void) dchan->uport = &hsu->port[i/2]; dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + i * HSU_DMA_CHANS_REG_LENGTH; + + /* Work around for RX */ + if (dchan->dirt == DMA_FROM_DEVICE) { + init_timer(&dchan->rx_timer); + dchan->rx_timer.function = hsu_dma_rx_timeout; + dchan->rx_timer.data = (unsigned long)dchan; + } dchan++; } -- cgit v0.10.2 From 06c77e21ae7c199435097116b8212b0761fc8ba8 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 27 Jul 2010 08:20:42 +0100 Subject: hsu: some code cleanup Major changes are: * refine the comments in the driver * remove unused member from structure "hsu_port" * extended spin_lock protoction for dma mode in port_irq() Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index ed2bf6b..f5e7569 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c @@ -3,7 +3,7 @@ * * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ * - * (C) Copyright 2009 Intel Corporation + * (C) Copyright 2010 Intel Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -11,30 +11,16 @@ * of the License. */ - /* Notes: - * 1. there should be 2 types of register access method, one for - * UART ports, the other for the general purpose registers - * - * 2. It used to have a Irda port, but was defeatured recently - * - * 3. Based on the info from HSU MAS, 0/1 channel are assigned to - * port0, 2/3 chan to port 1, 4/5 chan to port 3. Even number - * chan will be read, odd chan for write - * - * 4. HUS supports both the 64B and 16B FIFO version, but this driver - * will only use 64B version + * 1. DMA channel allocation: 0/1 channel are assigned to port 0, + * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans + * are used for RX, odd chans for TX * - * 5. In A0 stepping, UART will not support TX half empty flag, thus - * need add a #ifdef judgement + * 2. In A0 stepping, UART will not support TX half empty flag * - * 6. One more bug for A0, the loopback mode won't support AFC - * auto-flow control - * - * 7. HSU has some special FCR control bits, we add it to serial_reg.h - * - * 8. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always asserted, - * only when the HW is reset the DDCD and DDSR will be triggered + * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * asserted, only when the HW is reset the DDCD and DDSR will + * be triggered */ #include @@ -75,7 +61,7 @@ struct hsu_dma_buffer { struct hsu_dma_chan { u32 id; - u32 dirt; /* to or from device */ + enum dma_data_direction dirt; struct uart_hsu_port *uport; void __iomem *reg; struct timer_list rx_timer; /* only needed by RX channel */ @@ -102,8 +88,6 @@ struct uart_hsu_port { /* Top level data structure of HSU */ struct hsu_port { - struct pci_device *pdev; - void __iomem *reg; unsigned long paddr; unsigned long iolen; @@ -112,23 +96,9 @@ struct hsu_port { struct uart_hsu_port port[3]; struct hsu_dma_chan chans[10]; -#ifdef CONFIG_DEBUG_FS struct dentry *debugfs; -#endif }; -static inline void hexdump(char *str, u8 *addr, int cnt) -{ - int i; - - for (i = 0; i < cnt; i += 8) { - printk("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x", - addr[i], addr[i+1], addr[i+2], addr[i+3], - addr[i+4], addr[i+5], addr[i+6], addr[i+7]); - printk("\n"); - } -} - static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) { unsigned int val; @@ -353,9 +323,6 @@ void hsu_dma_tx(struct uart_hsu_port *up) | (0x1 << 8) | (0x1 << 16) | (0x1 << 24)); - - WARN(chan_readl(up->txc, HSU_CH_CR) & 0x1, - "TX channel has already be started!!\n"); up->dma_tx_on = 1; chan_writel(up->txc, HSU_CH_CR, 0x1); } @@ -367,7 +334,6 @@ void hsu_dma_tx(struct uart_hsu_port *up) /* The buffer is already cache coherent */ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) { - /* Need start RX dma channel here */ dbuf->ofs = 0; chan_writel(rxc, HSU_CH_BSR, 32); @@ -426,35 +392,32 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) return; /* - * first need to know how many is already transferred, + * First need to know how many is already transferred, * then check if its a timeout DMA irq, and return * the trail bytes out, push them up and reenable the - * channel, better to use 2 descriptors at the same time + * channel */ - /* timeout IRQ, need wait some time, see Errata 2 */ + /* Timeout IRQ, need wait some time, see Errata 2 */ if (int_sts & 0xf00) udelay(2); /* Stop the channel */ chan_writel(chan, HSU_CH_CR, 0x0); - /* We can use 2 ways to calc the actual transfer len */ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - if (!count) { - /* restart the channel before we leave */ + /* Restart the channel before we leave */ chan_writel(chan, HSU_CH_CR, 0x3); return; } - del_timer(&chan->rx_timer); dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, dbuf->dma_size, DMA_FROM_DEVICE); /* - * head will only wrap around when we recycle + * Head will only wrap around when we recycle * the DMA buffer, and when that happens, we * explicitly set tail to 0. So head will * always be greater than tail. @@ -496,10 +459,6 @@ static void serial_hsu_stop_rx(struct uart_port *port) } } -/* - * if there is error flag, should we just reset the FIFO or keeps - * working on it - */ static inline void receive_chars(struct uart_hsu_port *up, int *status) { struct tty_struct *tty = up->port.state->port.tty; @@ -571,7 +530,6 @@ static void transmit_chars(struct uart_hsu_port *up) { struct circ_buf *xmit = &up->port.state->xmit; int count; - int i = 0; /* for debug use */ if (up->port.x_char) { serial_out(up, UART_TX, up->port.x_char); @@ -592,13 +550,11 @@ static void transmit_chars(struct uart_hsu_port *up) * into it won't clear the EMPT bit, so we may need be cautious * by useing a shorter buffer */ - /* count = up->port.fifosize; */ count = up->port.fifosize - 4; #endif do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - i++; up->port.icount.tx++; if (uart_circ_empty(xmit)) @@ -628,7 +584,7 @@ static inline void check_modem_status(struct uart_hsu_port *up) /* We may only get DDCD when HW init and reset */ if (status & UART_MSR_DDCD) uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - /* will start/stop_tx accordingly */ + /* Will start/stop_tx accordingly */ if (status & UART_MSR_DCTS) uart_handle_cts_change(&up->port, status & UART_MSR_CTS); @@ -647,6 +603,7 @@ static irqreturn_t port_irq(int irq, void *dev_id) if (unlikely(!up->running)) return IRQ_NONE; + spin_lock_irqsave(&up->port.lock, flags); if (up->use_dma) { lsr = serial_in(up, UART_LSR); if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | @@ -655,10 +612,10 @@ static irqreturn_t port_irq(int irq, void *dev_id) "Got lsr irq while using DMA, lsr = 0x%2x\n", lsr); check_modem_status(up); + spin_unlock_irqrestore(&up->port.lock, flags); return IRQ_HANDLED; } - spin_lock_irqsave(&up->port.lock, flags); iir = serial_in(up, UART_IIR); if (iir & UART_IIR_NO_INT) { spin_unlock_irqrestore(&up->port.lock, flags); @@ -666,9 +623,9 @@ static irqreturn_t port_irq(int irq, void *dev_id) } lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) receive_chars(up, &lsr); + check_modem_status(up); /* lsr will be renewed during the receive_chars */ if (lsr & UART_LSR_THRE) @@ -701,7 +658,6 @@ static inline void dma_chan_irq(struct hsu_dma_chan *chan) /* Tx channel */ if (chan->dirt == DMA_TO_DEVICE) { - /* dma for irq should be done */ chan_writel(chan, HSU_CH_CR, 0x0); up->dma_tx_on = 0; hsu_dma_tx(up); @@ -851,7 +807,6 @@ static int serial_hsu_startup(struct uart_port *port) spin_unlock_irqrestore(&up->port.lock, flags); /* DMA init */ - /* When use DMA, TX/RX's FIFO and IRQ should be disabled */ if (up->use_dma) { struct hsu_dma_buffer *dbuf; struct circ_buf *xmit = &port->state->xmit; @@ -1090,11 +1045,9 @@ static int serial_hsu_request_port(struct uart_port *port) static void serial_hsu_config_port(struct uart_port *port, int flags) { -#if 0 struct uart_hsu_port *up = container_of(port, struct uart_hsu_port, port); up->port.type = PORT_MFD; -#endif } static int @@ -1426,7 +1379,7 @@ static void hsu_global_init(void) uport->port.ops = &serial_hsu_pops; uport->port.line = i; uport->port.flags = UPF_IOREMAP; - /* make the maxim support rate to 2746800 bps */ + /* set the scalable maxim support rate to 2746800 bps */ uport->port.uartclk = 115200 * 24 * 16; uport->running = 0; -- cgit v0.10.2 From 3c4108c82f7769fcd265dc77a5bb0c6d8bcea25f Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 27 Jul 2010 08:20:52 +0100 Subject: hsu: call PCI pm hooks in suspend/resume function Also add check for dma controller or the uart ports. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index f5e7569..bc9af50 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c @@ -1217,25 +1217,38 @@ static struct uart_driver serial_hsu_reg = { #ifdef CONFIG_PM static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) { + void *priv = pci_get_drvdata(pdev); struct uart_hsu_port *up; - up = pci_get_drvdata(pdev); - if (!up) - return 0; - - uart_suspend_port(&serial_hsu_reg, &up->port); + /* Make sure this is not the internal dma controller */ + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_suspend_port(&serial_hsu_reg, &up->port); + } + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } static int serial_hsu_resume(struct pci_dev *pdev) { + void *priv = pci_get_drvdata(pdev); struct uart_hsu_port *up; + int ret; - up = pci_get_drvdata(pdev); - if (!up) - return 0; - uart_resume_port(&serial_hsu_reg, &up->port); + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) + dev_warn(&pdev->dev, + "HSU: can't re-enable device, try to continue\n"); + + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_resume_port(&serial_hsu_reg, &up->port); + } return 0; } #else -- cgit v0.10.2 From e38018be3e7c03dd7e8f4ab0e1d55407cebbf89d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 27 Jul 2010 08:16:05 +0100 Subject: serial: max3107: Fix gpiolib support Because of the way gpiolib works we actually need to ifdef this in our header file Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h index 72b3041..7ab63239 100644 --- a/drivers/serial/max3107.h +++ b/drivers/serial/max3107.h @@ -368,8 +368,10 @@ struct max3107_port { /* SPI device structure */ struct spi_device *spi; +#if defined(CONFIG_GPIOLIB) /* GPIO chip stucture */ struct gpio_chip chip; +#endif /* Workqueue that does all the magic */ struct workqueue_struct *workqueue; -- cgit v0.10.2 From ee78bb95b7bea08b7774a02073ea2bb45611a9e1 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 29 Jul 2010 11:09:47 +0200 Subject: Char: nozomi, fix tty->count counting Currently ntty_install omits to increment tty count and we get the following warnings: Warning: dev (noz2) tty->count(0) != #fd's(1) in tty_open So to fix that, add one tty->count++ there. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: stable [.34, .35] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index a663800..21ae1b1 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1611,6 +1611,7 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) ret = tty_init_termios(tty); if (ret == 0) { tty_driver_kref_get(driver); + tty->count++; driver->ttys[tty->index] = tty; } return ret; -- cgit v0.10.2 From bf9c1fca9ae9a79ed209e7ab2c10b3862f3f6f72 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 29 Jul 2010 11:46:32 +0200 Subject: Char: nozomi, set tty->driver_data appropriately Sorry, one more fix, this one depends on the other, so this is rather 2/2. -- tty->driver_data is used all over the code, but never set. This results in oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [] mutex_lock+0x10/0x40 ... Pid: 2157, comm: modem-manager Not tainted 2.6.34.1-0.1-desktop #1 2768DR7/2768DR7 RIP: 0010:[] [] mutex_lock+0x10/0x40 RSP: 0018:ffff88007b16fa50 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000130 RCX: 0000000000000003 RDX: 0000000000000003 RSI: 0000000000000286 RDI: 0000000000000130 RBP: 0000000000001000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000130 R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007b16feb4 ... Call Trace: [] ntty_write_room+0x4d/0x90 [nozomi] ... Set tty->driver_data to the computed port in .install to not recompute it in every place where needed. Switch .open to use driver_data too. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: stable [.34, .35] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 21ae1b1..18af923 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1612,6 +1612,7 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) if (ret == 0) { tty_driver_kref_get(driver); tty->count++; + tty->driver_data = port; driver->ttys[tty->index] = tty; } return ret; @@ -1640,7 +1641,7 @@ static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) static int ntty_open(struct tty_struct *tty, struct file *filp) { - struct port *port = get_port_by_tty(tty); + struct port *port = tty->driver_data; return tty_port_open(&port->port, tty, filp); } -- cgit v0.10.2 From 235dae5d094c415fcf0fc79fa637f1901bc8afe2 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Thu, 29 Jul 2010 17:13:57 +0200 Subject: U6715 16550A serial driver support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UART Features extract from STEricsson U6715 data-sheet (arm926 SoC for mobile phone): * Fully compatible with industry standard 16C550 and 16C450 from various manufacturers * RX and TX 64 byte FIFO reduces CPU interrupts * Full double buffering * Modem control signals include CTS, RTS, (and DSR, DTR on UART1 only) * Automatic baud rate selection * Manual or automatic RTS/CTS smart hardware flow control * Programmable serial characteristics: – Baud rate generation (50 to 3.25M baud) – 5, 6, 7 or 8-bit characters – Even, odd or no-parity bit generation and detection – 1, 1.5 or 2 stop bit generation * Independent control of transmit, receive, line status, data set interrupts and FIFOs * Full status-reporting capabilities * Separate DMA signaling for RX and TX * Timed interrupt to spread receive interrupt on known duration * DMA time-out interrupt to allow detection of end of reception * Carkit pulse coding and decoding compliant with USB carkit control interface [40] In 16550A auto-configuration, if the fifo size is 64 then it's an U6 16550A port Add set_termios hook & export serial8250_do_set_termios to change uart clock following baudrate Signed-off-by: Philippe Langlais Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 355148d..24110f6 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -300,6 +300,13 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; #if defined(CONFIG_MIPS_ALCHEMY) @@ -1070,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up) DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); } serial_outp(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } } /* @@ -2224,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int return quot; } -static void -serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; @@ -2402,6 +2418,17 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); } +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} static void serial8250_set_ldisc(struct uart_port *port, int new) @@ -2982,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.type = p->type; port.serial_in = p->serial_in; port.serial_out = p->serial_out; + port.set_termios = p->set_termios; port.dev = &dev->dev; port.irqflags |= irqflag; ret = serial8250_register_port(&port); @@ -3145,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port) uart->port.serial_in = port->serial_in; if (port->serial_out) uart->port.serial_out = port->serial_out; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) diff --git a/include/linux/serial.h b/include/linux/serial.h index ef91406..1ebc694 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -77,7 +77,8 @@ struct serial_struct { #define PORT_16654 11 #define PORT_16850 12 #define PORT_RSA 13 /* RSA-DV II/S card */ -#define PORT_MAX 13 +#define PORT_U6_16550A 14 +#define PORT_MAX 14 #define SERIAL_IO_PORT 0 #define SERIAL_IO_HUB6 1 diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index fb46aba..7638dea 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -32,6 +32,9 @@ struct plat_serial8250_port { unsigned int type; /* If UPF_FIXED_TYPE */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); + void (*set_termios)(struct uart_port *, + struct ktermios *new, + struct ktermios *old); }; /* @@ -71,5 +74,7 @@ extern int early_serial_setup(struct uart_port *port); extern int serial8250_find_port(struct uart_port *p); extern int serial8250_find_port_for_earlycon(void); extern int setup_early_serial8250_console(char *cmdline); +extern void serial8250_do_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old); #endif diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f8fce35..8129ca2 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -282,6 +282,9 @@ struct uart_port { unsigned char __iomem *membase; /* read/write[bwl] */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); + void (*set_termios)(struct uart_port *, + struct ktermios *new, + struct ktermios *old); unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ -- cgit v0.10.2