From 9a091d9e8450a4cec76bd208bbbb017a12795416 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 28 Feb 2014 16:13:44 +0800 Subject: ARC: [SMP] ISS SMP extension bitrot * Move extension specific code out of common SMP code * Don't enable it by default for SMP Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index 291a70d..781f57f 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -19,8 +19,6 @@ #include extern void arc_init_IRQ(void); -extern int get_hw_config_num_irq(void); - void arc_local_timer_setup(unsigned int cpu); #endif diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index a4b141e..7d653c0 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -150,24 +150,6 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } -int get_hw_config_num_irq(void) -{ - uint32_t val = read_aux_reg(ARC_REG_VECBASE_BCR); - - switch (val & 0x03) { - case 0: - return 16; - case 1: - return 32; - case 2: - return 8; - default: - return 0; - } - - return 0; -} - /* * arch_local_irq_enable - Enable interrupts. * diff --git a/arch/arc/plat-arcfpga/Makefile b/arch/arc/plat-arcfpga/Makefile index a44e22e..4d1bddc 100644 --- a/arch/arc/plat-arcfpga/Makefile +++ b/arch/arc/plat-arcfpga/Makefile @@ -9,4 +9,4 @@ KBUILD_CFLAGS += -Iarch/arc/plat-arcfpga/include obj-y := platform.o irq.o -obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_ISS_SMP_EXTN) += smp.o diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 19b76b6..213394a 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -169,7 +169,7 @@ static void __init plat_fpga_early_init(void) arc_fpga_serial_init(); -#ifdef CONFIG_SMP +#ifdef CONFIG_ISS_SMP_EXTN iss_model_init_early_smp(); #endif } @@ -211,7 +211,7 @@ MACHINE_START(ANGEL4, "angel4") .init_early = plat_fpga_early_init, .init_machine = plat_fpga_populate_dev, .init_irq = plat_fpga_init_IRQ, -#ifdef CONFIG_SMP +#ifdef CONFIG_ISS_SMP_EXTN .init_smp = iss_model_init_smp, #endif MACHINE_END diff --git a/arch/arc/plat-arcfpga/smp.c b/arch/arc/plat-arcfpga/smp.c index 8a12741..92bad91 100644 --- a/arch/arc/plat-arcfpga/smp.c +++ b/arch/arc/plat-arcfpga/smp.c @@ -42,6 +42,24 @@ static void iss_model_smp_wakeup_cpu(int cpu, unsigned long pc) } +static inline int get_hw_config_num_irq(void) +{ + uint32_t val = read_aux_reg(ARC_REG_VECBASE_BCR); + + switch (val & 0x03) { + case 0: + return 16; + case 1: + return 32; + case 2: + return 8; + default: + return 0; + } + + return 0; +} + /* * Any SMP specific init any CPU does when it comes up. * Here we setup the CPU to enable Inter-Processor-Interrupts -- cgit v0.10.2 From d75386363ee60eb51c933c7b5e536f3a502ad7d7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 6 Apr 2014 06:59:51 +0530 Subject: ARC: fix mmuv2 warning Signed-off-by: Vineet Gupta diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 89edf79..23c3832 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -253,12 +253,16 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, if (cacheop == OP_INV_IC) { aux_cmd = ARC_REG_IC_IVIL; +#if (CONFIG_ARC_MMU_VER > 2) aux_tag = ARC_REG_IC_PTAG; +#endif } else { /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; +#if (CONFIG_ARC_MMU_VER > 2) aux_tag = ARC_REG_DC_PTAG; +#endif } /* Ensure we properly floor/ceil the non-line aligned/sized requests -- cgit v0.10.2 From 2ab402dfd65d15a4b25a8756272ababe3ef76884 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 18 Apr 2014 12:19:59 +0530 Subject: ARC: make start_thread() out-of-line Helps move out ISA specific bits from a arch exported header Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 15334ab..d99f9b3 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -18,7 +18,6 @@ #ifndef __ASSEMBLY__ -#include /* for STATUS_E1_MASK et all */ #include /* Arch specific stuff which needs to be saved per task. @@ -41,15 +40,13 @@ struct thread_struct { /* Forward declaration, a strange C thing */ struct task_struct; -/* - * Return saved PC of a blocked thread. - */ +/* Return saved PC of a blocked thread */ unsigned long thread_saved_pc(struct task_struct *t); #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1) -/* Free all resources held by a thread. */ +/* Free all resources held by a thread */ #define release_thread(thread) do { } while (0) /* Prepare to copy thread state - unlazy all lazy status */ @@ -82,26 +79,8 @@ unsigned long thread_saved_pc(struct task_struct *t); #define KSTK_BLINK(tsk) KSTK_REG(tsk, 4) #define KSTK_FP(tsk) KSTK_REG(tsk, 0) -/* - * Do necessary setup to start up a newly executed thread. - * - * E1,E2 so that Interrupts are enabled in user mode - * L set, so Loop inhibited to begin with - * lp_start and lp_end seeded with bogus non-zero values so to easily catch - * the ARC700 sr to lp_start hardware bug - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->ret = (_pc); \ - /* Interrupts enabled in User Mode */ \ - (_regs)->status32 = STATUS_U_MASK | STATUS_L_MASK \ - | STATUS_E1_MASK | STATUS_E2_MASK; \ - (_regs)->sp = (_usp); \ - /* bogus seed values for debugging */ \ - (_regs)->lp_start = 0x10; \ - (_regs)->lp_end = 0x80; \ -} while (0) +extern void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp); extern unsigned int get_wchan(struct task_struct *p); diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c index 07a3a96..fdd8971 100644 --- a/arch/arc/kernel/process.c +++ b/arch/arc/kernel/process.c @@ -151,6 +151,29 @@ int copy_thread(unsigned long clone_flags, } /* + * Do necessary setup to start up a new user task + */ +void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp) +{ + set_fs(USER_DS); /* user space */ + + regs->sp = usp; + regs->ret = pc; + + /* + * [U]ser Mode bit set + * [L] ZOL loop inhibited to begin with - cleared by a LP insn + * Interrupts enabled + */ + regs->status32 = STATUS_U_MASK | STATUS_L_MASK | + STATUS_E1_MASK | STATUS_E2_MASK; + + /* bogus seed values for debugging */ + regs->lp_start = 0x10; + regs->lp_end = 0x80; +} + +/* * Some archs flush debug and FPU info here */ void flush_thread(void) -- cgit v0.10.2 From f63f98ea253c493a514b5f5748480336ad1d9dbf Mon Sep 17 00:00:00 2001 From: Terence Eden Date: Sun, 20 Apr 2014 13:33:48 +0100 Subject: ARC: Fixed spelling errors within comments [vgupta: fixed changelong + added Randy's suggestion] Signed-off-by: Terence Eden Acked-by: Randy Dunlap Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 29b82ad..83a046a 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -156,7 +156,7 @@ ARCFP_DATA int1_saved_reg int1_saved_reg: .zero 4 -/* Each Interrupt level needs it's own scratch */ +/* Each Interrupt level needs its own scratch */ #ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS ARCFP_DATA int2_saved_reg @@ -473,7 +473,7 @@ trap_with_param: lr r0, [efa] mov r1, sp - ; Now that we have read EFA, its safe to do "fake" rtie + ; Now that we have read EFA, it is safe to do "fake" rtie ; and get out of CPU exception mode FAKE_RET_FROM_EXCPN r11 @@ -678,9 +678,9 @@ not_exception: brne r9, event_IRQ2, 149f ;------------------------------------------------------------------ - ; if L2 IRQ interrupted a L1 ISR, we'd disbaled preemption earlier - ; so that sched doesnt move to new task, causing L1 to be delayed - ; undeterministically. Now that we've achieved that, lets reset + ; if L2 IRQ interrupted an L1 ISR, we'd disabled preemption earlier + ; so that sched doesn't move to new task, causing L1 to be delayed + ; undeterministically. Now that we've achieved that, let's reset ; things to what they were, before returning from L2 context ;---------------------------------------------------------------- @@ -736,7 +736,7 @@ ENTRY(ret_from_fork) ; put last task in scheduler queue bl @schedule_tail - ; If kernel thread, jump to it's entry-point + ; If kernel thread, jump to its entry-point ld r9, [sp, PT_status32] brne r9, 0, 1f -- cgit v0.10.2 From 2d4899f6bddfbeb88c01f2ec28f977e0d8c8d369 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 8 May 2014 14:06:38 +0530 Subject: ARC: arc_local_timer_setup() need not pass own cpu id Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index 781f57f..fb4efb6 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -19,6 +19,6 @@ #include extern void arc_init_IRQ(void); -void arc_local_timer_setup(unsigned int cpu); +void arc_local_timer_setup(void); #endif diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 40859e5..cf90b6f 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -138,7 +138,7 @@ void start_kernel_secondary(void) if (machine_desc->init_smp) machine_desc->init_smp(smp_processor_id()); - arc_local_timer_setup(cpu); + arc_local_timer_setup(); local_irq_enable(); preempt_disable(); diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 71c4252..36c2aa9 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -219,12 +219,13 @@ static struct irqaction arc_timer_irq = { /* * Setup the local event timer for @cpu */ -void arc_local_timer_setup(unsigned int cpu) +void arc_local_timer_setup() { - struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu); + struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device); + int cpu = smp_processor_id(); - clk->cpumask = cpumask_of(cpu); - clockevents_config_and_register(clk, arc_get_core_freq(), + evt->cpumask = cpumask_of(cpu); + clockevents_config_and_register(evt, arc_get_core_freq(), 0, ARC_TIMER_MAX); /* @@ -261,7 +262,7 @@ void __init time_init(void) clocksource_register_hz(&arc_counter, arc_get_core_freq()); /* sets up the periodic event timer */ - arc_local_timer_setup(smp_processor_id()); + arc_local_timer_setup(); if (machine_desc->init_time) machine_desc->init_time(); -- cgit v0.10.2 From 26bc8a9fcf4f9b3a562daaf28cf3ebda4fb80c65 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 16 May 2014 09:50:38 +0530 Subject: ARC: remove duplicate header exports Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild index 18fefae..f50d02d 100644 --- a/arch/arc/include/uapi/asm/Kbuild +++ b/arch/arc/include/uapi/asm/Kbuild @@ -2,11 +2,4 @@ include include/uapi/asm-generic/Kbuild.asm header-y += elf.h header-y += page.h -header-y += setup.h -header-y += byteorder.h header-y += cachectl.h -header-y += ptrace.h -header-y += sigcontext.h -header-y += signal.h -header-y += swab.h -header-y += unistd.h -- cgit v0.10.2 From c00bfd974fb0b7a5a501aebada2a94945e38a9a5 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 3 Jun 2014 13:28:32 +0530 Subject: ARC: [arcfpga] Get rid of legacy BVCI latency unit support Signed-off-by: Vineet Gupta diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig index 33058aa..e27bb5c 100644 --- a/arch/arc/plat-arcfpga/Kconfig +++ b/arch/arc/plat-arcfpga/Kconfig @@ -48,36 +48,4 @@ config ARC_SERIAL_BAUD help Baud rate for the ARC UART -menuconfig ARC_HAS_BVCI_LAT_UNIT - bool "BVCI Bus Latency Unit" - depends on ARC_BOARD_ML509 || ARC_BOARD_ANGEL4 - help - IP to add artificial latency to BVCI Bus Based FPGA builds. - The default latency (even worst case) for FPGA is non-realistic - (~10 SDRAM, ~5 SSRAM). - -config BVCI_LAT_UNITS - hex "Latency Unit(s) Bitmap" - default "0x0" - depends on ARC_HAS_BVCI_LAT_UNIT - help - There are multiple Latency Units corresponding to the many - interfaces of the system bus arbiter (both CPU side as well as - the peripheral side). - To add latency to ALL memory transaction, choose Unit 0, otherwise - for finer grainer - interface wise latency, specify a bitmap (1 bit - per unit) of all units. e.g. 1,2,12 will be 0x1003 - - Unit 0 - System Arb and Mem Controller - Unit 1 - I$ and System Bus - Unit 2 - D$ and System Bus - .. - Unit 12 - IDE Disk controller and System Bus - -config BVCI_LAT_CYCLES - int "Latency Value in cycles" - range 0 63 - default "30" - depends on ARC_HAS_BVCI_LAT_UNIT - endif diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 213394a..f09e771 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -22,59 +22,6 @@ #include #include -/*-----------------------BVCI Latency Unit -----------------------------*/ - -#ifdef CONFIG_ARC_HAS_BVCI_LAT_UNIT - -int lat_cycles = CONFIG_BVCI_LAT_CYCLES; - -/* BVCI Bus Profiler: Latency Unit */ -static void __init setup_bvci_lat_unit(void) -{ -#define MAX_BVCI_UNITS 12 - - unsigned int i; - unsigned int *base = (unsigned int *)BVCI_LAT_UNIT_BASE; - const unsigned long units_req = CONFIG_BVCI_LAT_UNITS; - const unsigned int REG_UNIT = 21; - const unsigned int REG_VAL = 22; - - /* - * There are multiple Latency Units corresponding to the many - * interfaces of the system bus arbiter (both CPU side as well as - * the peripheral side). - * - * Unit 0 - System Arb and Mem Controller - adds latency to all - * memory trasactions - * Unit 1 - I$ and System Bus - * Unit 2 - D$ and System Bus - * .. - * Unit 12 - IDE Disk controller and System Bus - * - * The programmers model requires writing to lat_unit reg first - * and then the latency value (cycles) to lat_value reg - */ - - if (CONFIG_BVCI_LAT_UNITS == 0) { - writel(0, base + REG_UNIT); - writel(lat_cycles, base + REG_VAL); - pr_info("BVCI Latency for all Memory Transactions %d cycles\n", - lat_cycles); - } else { - for_each_set_bit(i, &units_req, MAX_BVCI_UNITS) { - writel(i + 1, base + REG_UNIT); /* loop is 0 based */ - writel(lat_cycles, base + REG_VAL); - pr_info("BVCI Latency for Unit[%d] = %d cycles\n", - (i + 1), lat_cycles); - } - } -} -#else -static void __init setup_bvci_lat_unit(void) -{ -} -#endif - /*----------------------- Platform Devices -----------------------------*/ #if IS_ENABLED(CONFIG_SERIAL_ARC) @@ -165,8 +112,6 @@ static void __init plat_fpga_early_init(void) { pr_info("[plat-arcfpga]: registering early dev resources\n"); - setup_bvci_lat_unit(); - arc_fpga_serial_init(); #ifdef CONFIG_ISS_SMP_EXTN -- cgit v0.10.2 From e87a850b9c92be6a8cf5735c516ec864d65f24dd Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 31 Mar 2014 16:22:09 +0530 Subject: ARC: [arcfpga] Early ARC UART to be only activated by cmdline Earlier CONFIG_SERIAL_ARC_CONSOLE would unconditionally enable the legacy ARC UART based early console even if platform lacked that UART (e.g. nSIM OSCI platform). So a multi-platform image containing the 2 UART drivers won't work. Fix that by probing the driver only if "earlyprintk=ttyARC0" is present in cmdline. Reported-by: Chuck Jordan Signed-off-by: Vineet Gupta diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts index bcf662d..5bb2fda 100644 --- a/arch/arc/boot/dts/angel4.dts +++ b/arch/arc/boot/dts/angel4.dts @@ -17,7 +17,7 @@ interrupt-parent = <&intc>; chosen { - bootargs = "console=ttyARC0,115200n8"; + bootargs = "console=ttyARC0,115200n8 earlyprintk=ttyARC0"; }; aliases { diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index f09e771..61c7e59 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -79,16 +79,11 @@ static void arc_fpga_serial_init(void) ARRAY_SIZE(fpga_early_devs)); /* - * ARC console driver registers itself as an early platform driver - * of class "earlyprintk". - * Install it here, followed by probe of devices. - * The installation here doesn't require earlyprintk in command line - * To do so however, replace the lines below with - * parse_early_param(); - * early_platform_driver_probe("earlyprintk", 1, 1); - * ^^ + * ARC console driver registers (build time) as an early platform driver + * of class "earlyprintk". However it needs explicit cmdline toggle + * "earlyprintk=ttyARC0" to be successfuly runtime registered. + * Otherwise the early probe below fails to find the driver */ - early_platform_driver_register_all("earlyprintk"); early_platform_driver_probe("earlyprintk", 1, 0); /* -- cgit v0.10.2 From ef680cdc24376f394841a3f19b3a7ef6d57a009d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 7 Mar 2014 18:08:11 +0530 Subject: ARC: Disable caches in early boot if so configured Requested-by: Noam Camus Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 2fd3162..c1d3d2d 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -55,4 +55,31 @@ extern void read_decode_cache_bcr(void); #endif /* !__ASSEMBLY__ */ +/* Instruction cache related Auxiliary registers */ +#define ARC_REG_IC_BCR 0x77 /* Build Config reg */ +#define ARC_REG_IC_IVIC 0x10 +#define ARC_REG_IC_CTRL 0x11 +#define ARC_REG_IC_IVIL 0x19 +#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#define ARC_REG_IC_PTAG 0x1E +#endif + +/* Bit val in IC_CTRL */ +#define IC_CTRL_CACHE_DISABLE 0x1 + +/* Data cache related Auxiliary registers */ +#define ARC_REG_DC_BCR 0x72 /* Build Config reg */ +#define ARC_REG_DC_IVDC 0x47 +#define ARC_REG_DC_CTRL 0x48 +#define ARC_REG_DC_IVDL 0x4A +#define ARC_REG_DC_FLSH 0x4B +#define ARC_REG_DC_FLDL 0x4C +#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#define ARC_REG_DC_PTAG 0x5C +#endif + +/* Bit val in DC_CTRL */ +#define DC_CTRL_INV_MODE_FLUSH 0x40 +#define DC_CTRL_FLUSH_STATUS 0x100 + #endif /* _ASM_CACHE_H */ diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 4ad0491..07a58f2 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -12,10 +12,42 @@ * to skip certain things during boot on simulator */ +#include #include #include -#include #include +#include + +.macro CPU_EARLY_SETUP + + ; Setting up Vectror Table (in case exception happens in early boot + sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + + ; Disable I-cache/D-cache if kernel so configured + lr r5, [ARC_REG_IC_BCR] + breq r5, 0, 1f ; I$ doesn't exist + lr r5, [ARC_REG_IC_CTRL] +#ifdef CONFIG_ARC_HAS_ICACHE + bclr r5, r5, 0 ; 0 - Enable, 1 is Disable +#else + bset r5, r5, 0 ; I$ exists, but is not used +#endif + sr r5, [ARC_REG_IC_CTRL] + +1: + lr r5, [ARC_REG_DC_BCR] + breq r5, 0, 1f ; D$ doesn't exist + lr r5, [ARC_REG_DC_CTRL] + bclr r5, r5, 6 ; Invalidate (discard w/o wback) +#ifdef CONFIG_ARC_HAS_DCACHE + bclr r5, r5, 0 ; Enable (+Inv) +#else + bset r5, r5, 0 ; Disable (+Inv) +#endif + sr r5, [ARC_REG_DC_CTRL] + +1: +.endm .cpu A7 @@ -27,7 +59,7 @@ stext: ; Don't clobber r0-r2 yet. It might have bootloader provided info ;------------------------------------------------------------------- - sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + CPU_EARLY_SETUP #ifdef CONFIG_SMP ; Ensure Boot (Master) proceeds. Others wait in platform dependent way @@ -90,7 +122,7 @@ stext: first_lines_of_secondary: - sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + CPU_EARLY_SETUP ; setup per-cpu idle task as "current" on this CPU ld r0, [@secondary_idle_tsk] diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 23c3832..1f676c4 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -73,33 +73,6 @@ #include #include -/* Instruction cache related Auxiliary registers */ -#define ARC_REG_IC_BCR 0x77 /* Build Config reg */ -#define ARC_REG_IC_IVIC 0x10 -#define ARC_REG_IC_CTRL 0x11 -#define ARC_REG_IC_IVIL 0x19 -#if (CONFIG_ARC_MMU_VER > 2) -#define ARC_REG_IC_PTAG 0x1E -#endif - -/* Bit val in IC_CTRL */ -#define IC_CTRL_CACHE_DISABLE 0x1 - -/* Data cache related Auxiliary registers */ -#define ARC_REG_DC_BCR 0x72 /* Build Config reg */ -#define ARC_REG_DC_IVDC 0x47 -#define ARC_REG_DC_CTRL 0x48 -#define ARC_REG_DC_IVDL 0x4A -#define ARC_REG_DC_FLSH 0x4B -#define ARC_REG_DC_FLDL 0x4C -#if (CONFIG_ARC_MMU_VER > 2) -#define ARC_REG_DC_PTAG 0x5C -#endif - -/* Bit val in DC_CTRL */ -#define DC_CTRL_INV_MODE_FLUSH 0x40 -#define DC_CTRL_FLUSH_STATUS 0x100 - char *arc_cache_mumbojumbo(int c, char *buf, int len) { int n = 0; @@ -168,72 +141,43 @@ void read_decode_cache_bcr(void) */ void arc_cache_init(void) { - unsigned int cpu = smp_processor_id(); - struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; - struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; - unsigned int dcache_does_alias, temp; + unsigned int __maybe_unused cpu = smp_processor_id(); + struct cpuinfo_arc_cache __maybe_unused *ic, __maybe_unused *dc; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); - if (!ic->ver) - goto chk_dc; - #ifdef CONFIG_ARC_HAS_ICACHE - /* 1. Confirm some of I-cache params which Linux assumes */ - if (ic->line_len != L1_CACHE_BYTES) - panic("Cache H/W doesn't match kernel Config"); - - if (ic->ver != CONFIG_ARC_MMU_VER) - panic("Cache ver doesn't match MMU ver\n"); -#endif - - /* Enable/disable I-Cache */ - temp = read_aux_reg(ARC_REG_IC_CTRL); - -#ifdef CONFIG_ARC_HAS_ICACHE - temp &= ~IC_CTRL_CACHE_DISABLE; -#else - temp |= IC_CTRL_CACHE_DISABLE; + ic = &cpuinfo_arc700[cpu].icache; + if (ic->ver) { + if (ic->line_len != L1_CACHE_BYTES) + panic("ICache line [%d] != kernel Config [%d]", + ic->line_len, L1_CACHE_BYTES); + + if (ic->ver != CONFIG_ARC_MMU_VER) + panic("Cache ver [%d] doesn't match MMU ver [%d]\n", + ic->ver, CONFIG_ARC_MMU_VER); + } #endif - write_aux_reg(ARC_REG_IC_CTRL, temp); - -chk_dc: - if (!dc->ver) - return; - #ifdef CONFIG_ARC_HAS_DCACHE - if (dc->line_len != L1_CACHE_BYTES) - panic("Cache H/W doesn't match kernel Config"); + dc = &cpuinfo_arc700[cpu].dcache; + if (dc->ver) { + unsigned int dcache_does_alias; - /* check for D-Cache aliasing */ - dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE; + if (dc->line_len != L1_CACHE_BYTES) + panic("DCache line [%d] != kernel Config [%d]", + dc->line_len, L1_CACHE_BYTES); - if (dcache_does_alias && !cache_is_vipt_aliasing()) - panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); - else if (!dcache_does_alias && cache_is_vipt_aliasing()) - panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); -#endif + /* check for D-Cache aliasing */ + dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE; - /* Set the default Invalidate Mode to "simpy discard dirty lines" - * as this is more frequent then flush before invalidate - * Ofcourse we toggle this default behviour when desired - */ - temp = read_aux_reg(ARC_REG_DC_CTRL); - temp &= ~DC_CTRL_INV_MODE_FLUSH; - -#ifdef CONFIG_ARC_HAS_DCACHE - /* Enable D-Cache: Clear Bit 0 */ - write_aux_reg(ARC_REG_DC_CTRL, temp & ~IC_CTRL_CACHE_DISABLE); -#else - /* Flush D cache */ - write_aux_reg(ARC_REG_DC_FLSH, 0x1); - /* Disable D cache */ - write_aux_reg(ARC_REG_DC_CTRL, temp | IC_CTRL_CACHE_DISABLE); + if (dcache_does_alias && !cache_is_vipt_aliasing()) + panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + else if (!dcache_does_alias && cache_is_vipt_aliasing()) + panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + } #endif - - return; } #define OP_INV 0x1 -- cgit v0.10.2