From 1df8130278c4543555fea697e5714fbac300b899 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 15:58:50 +0000 Subject: [ARM] dma: remove dmach_t typedef Remove a pointless integer typedef. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index df5638f..c5557a6 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,8 +19,6 @@ #include #include -typedef unsigned int dmach_t; - #include /* @@ -52,44 +50,44 @@ static inline void release_dma_lock(unsigned long flags) /* Clear the 'DMA Pointer Flip Flop'. * Write 0 for LSB/MSB, 1 for MSB/LSB access. */ -#define clear_dma_ff(channel) +#define clear_dma_ff(chan) /* Set only the page register bits of the transfer address. * * NOTE: This is an architecture specific function, and should * be hidden from the drivers */ -extern void set_dma_page(dmach_t channel, char pagenr); +extern void set_dma_page(unsigned int chan, char pagenr); /* Request a DMA channel * * Some architectures may need to do allocate an interrupt */ -extern int request_dma(dmach_t channel, const char * device_id); +extern int request_dma(unsigned int chan, const char * device_id); /* Free a DMA channel * * Some architectures may need to do free an interrupt */ -extern void free_dma(dmach_t channel); +extern void free_dma(unsigned int chan); /* Enable DMA for this channel * * On some architectures, this may have other side effects like * enabling an interrupt and setting the DMA registers. */ -extern void enable_dma(dmach_t channel); +extern void enable_dma(unsigned int chan); /* Disable DMA for this channel * * On some architectures, this may have other side effects like * disabling an interrupt or whatever. */ -extern void disable_dma(dmach_t channel); +extern void disable_dma(unsigned int chan); /* Test whether the specified channel has an active DMA transfer */ -extern int dma_channel_active(dmach_t channel); +extern int dma_channel_active(unsigned int chan); /* Set the DMA scatter gather list for this channel * @@ -97,7 +95,7 @@ extern int dma_channel_active(dmach_t channel); * especially since some DMA architectures don't update the * DMA address immediately, but defer it to the enable_dma(). */ -extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); +extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg); /* Set the DMA address for this channel * @@ -105,9 +103,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); * especially since some DMA architectures don't update the * DMA address immediately, but defer it to the enable_dma(). */ -extern void __set_dma_addr(dmach_t channel, void *addr); -#define set_dma_addr(channel, addr) \ - __set_dma_addr(channel, bus_to_virt(addr)) +extern void __set_dma_addr(unsigned int chan, void *addr); +#define set_dma_addr(chan, addr) \ + __set_dma_addr(chan, bus_to_virt(addr)) /* Set the DMA byte count for this channel * @@ -115,7 +113,7 @@ extern void __set_dma_addr(dmach_t channel, void *addr); * especially since some DMA architectures don't update the * DMA count immediately, but defer it to the enable_dma(). */ -extern void set_dma_count(dmach_t channel, unsigned long count); +extern void set_dma_count(unsigned int chan, unsigned long count); /* Set the transfer direction for this channel * @@ -124,11 +122,11 @@ extern void set_dma_count(dmach_t channel, unsigned long count); * DMA transfer direction immediately, but defer it to the * enable_dma(). */ -extern void set_dma_mode(dmach_t channel, dmamode_t mode); +extern void set_dma_mode(unsigned int chan, dmamode_t mode); /* Set the transfer speed for this channel */ -extern void set_dma_speed(dmach_t channel, int cycle_ns); +extern void set_dma_speed(unsigned int chan, int cycle_ns); /* Get DMA residue count. After a DMA transfer, this * should return zero. Reading this while a DMA transfer is @@ -136,7 +134,7 @@ extern void set_dma_speed(dmach_t channel, int cycle_ns); * If called before the channel has been used, it may return 1. * Otherwise, it returns the number of _bytes_ left to transfer. */ -extern int get_dma_residue(dmach_t channel); +extern int get_dma_residue(unsigned int chan); #ifndef NO_DMA #define NO_DMA 255 diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index fc7278e..281ae7e 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -15,12 +15,12 @@ struct dma_struct; typedef struct dma_struct dma_t; struct dma_ops { - int (*request)(dmach_t, dma_t *); /* optional */ - void (*free)(dmach_t, dma_t *); /* optional */ - void (*enable)(dmach_t, dma_t *); /* mandatory */ - void (*disable)(dmach_t, dma_t *); /* mandatory */ - int (*residue)(dmach_t, dma_t *); /* optional */ - int (*setspeed)(dmach_t, dma_t *, int); /* optional */ + int (*request)(unsigned int, dma_t *); /* optional */ + void (*free)(unsigned int, dma_t *); /* optional */ + void (*enable)(unsigned int, dma_t *); /* mandatory */ + void (*disable)(unsigned int, dma_t *); /* mandatory */ + int (*residue)(unsigned int, dma_t *); /* optional */ + int (*setspeed)(unsigned int, dma_t *, int); /* optional */ char *type; }; diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 4a3a504..29eca48 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -49,25 +49,25 @@ static unsigned int isa_dma_port[8][7] = { { 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce } }; -static int isa_get_dma_residue(dmach_t channel, dma_t *dma) +static int isa_get_dma_residue(unsigned int chan, dma_t *dma) { - unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT]; + unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT]; int count; count = 1 + inb(io_port); count |= inb(io_port) << 8; - return channel < 4 ? count : (count << 1); + return chan < 4 ? count : (count << 1); } -static void isa_enable_dma(dmach_t channel, dma_t *dma) +static void isa_enable_dma(unsigned int chan, dma_t *dma) { if (dma->invalid) { unsigned long address, length; unsigned int mode; enum dma_data_direction direction; - mode = channel & 3; + mode = chan & 3; switch (dma->dma_mode & DMA_MODE_MASK) { case DMA_MODE_READ: mode |= ISA_DMA_MODE_READ; @@ -105,34 +105,34 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma) address = dma->buf.dma_address; length = dma->buf.length - 1; - outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]); - outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]); + outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]); + outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]); - if (channel >= 4) { + if (chan >= 4) { address >>= 1; length >>= 1; } - outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]); + outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]); - outb(address, isa_dma_port[channel][ISA_DMA_ADDR]); - outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]); + outb(address, isa_dma_port[chan][ISA_DMA_ADDR]); + outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]); - outb(length, isa_dma_port[channel][ISA_DMA_COUNT]); - outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]); + outb(length, isa_dma_port[chan][ISA_DMA_COUNT]); + outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]); if (dma->dma_mode & DMA_AUTOINIT) mode |= ISA_DMA_AUTOINIT; - outb(mode, isa_dma_port[channel][ISA_DMA_MODE]); + outb(mode, isa_dma_port[chan][ISA_DMA_MODE]); dma->invalid = 0; } - outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]); + outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]); } -static void isa_disable_dma(dmach_t channel, dma_t *dma) +static void isa_disable_dma(unsigned int chan, dma_t *dma) { - outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]); + outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]); } static struct dma_ops isa_dma_ops = { @@ -178,11 +178,11 @@ void __init isa_init_dma(dma_t *dma) outb(0xaa, 0x00); if (inb(0) == 0x55 && inb(0) == 0xaa) { - int channel, i; + int chan, i; - for (channel = 0; channel < 8; channel++) { - dma[channel].d_ops = &isa_dma_ops; - isa_disable_dma(channel, NULL); + for (chan = 0; chan < 8; chan++) { + dma[chan].d_ops = &isa_dma_ops; + isa_disable_dma(chan, NULL); } outb(0x40, 0x0b); diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index d006085..c31bf00 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -30,12 +30,12 @@ static dma_t dma_chan[MAX_DMA_CHANNELS]; * * On certain platforms, we have to allocate an interrupt as well... */ -int request_dma(dmach_t channel, const char *device_id) +int request_dma(unsigned int chan, const char *device_id) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; int ret; - if (channel >= MAX_DMA_CHANNELS || !dma->d_ops) + if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) goto bad_dma; if (xchg(&dma->lock, 1) != 0) @@ -47,7 +47,7 @@ int request_dma(dmach_t channel, const char *device_id) ret = 0; if (dma->d_ops->request) - ret = dma->d_ops->request(channel, dma); + ret = dma->d_ops->request(chan, dma); if (ret) xchg(&dma->lock, 0); @@ -55,7 +55,7 @@ int request_dma(dmach_t channel, const char *device_id) return ret; bad_dma: - printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel); + printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan); return -EINVAL; busy: @@ -68,42 +68,42 @@ EXPORT_SYMBOL(request_dma); * * On certain platforms, we have to free interrupt as well... */ -void free_dma(dmach_t channel) +void free_dma(unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; - if (channel >= MAX_DMA_CHANNELS || !dma->d_ops) + if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) goto bad_dma; if (dma->active) { - printk(KERN_ERR "dma%d: freeing active DMA\n", channel); - dma->d_ops->disable(channel, dma); + printk(KERN_ERR "dma%d: freeing active DMA\n", chan); + dma->d_ops->disable(chan, dma); dma->active = 0; } if (xchg(&dma->lock, 0) != 0) { if (dma->d_ops->free) - dma->d_ops->free(channel, dma); + dma->d_ops->free(chan, dma); return; } - printk(KERN_ERR "dma%d: trying to free free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to free free DMA\n", chan); return; bad_dma: - printk(KERN_ERR "dma: trying to free DMA%d\n", channel); + printk(KERN_ERR "dma: trying to free DMA%d\n", chan); } EXPORT_SYMBOL(free_dma); /* Set DMA Scatter-Gather list */ -void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg) +void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (dma->active) printk(KERN_ERR "dma%d: altering DMA SG while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = sg; dma->sgcount = nr_sg; @@ -115,13 +115,13 @@ EXPORT_SYMBOL(set_dma_sg); * * Copy address to the structure, and set the invalid bit */ -void __set_dma_addr (dmach_t channel, void *addr) +void __set_dma_addr (unsigned int chan, void *addr) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (dma->active) printk(KERN_ERR "dma%d: altering DMA address while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = NULL; dma->addr = addr; @@ -133,13 +133,13 @@ EXPORT_SYMBOL(__set_dma_addr); * * Copy address to the structure, and set the invalid bit */ -void set_dma_count (dmach_t channel, unsigned long count) +void set_dma_count (unsigned int chan, unsigned long count) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (dma->active) printk(KERN_ERR "dma%d: altering DMA count while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = NULL; dma->count = count; @@ -149,13 +149,13 @@ EXPORT_SYMBOL(set_dma_count); /* Set DMA direction mode */ -void set_dma_mode (dmach_t channel, dmamode_t mode) +void set_dma_mode (unsigned int chan, dmamode_t mode) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (dma->active) printk(KERN_ERR "dma%d: altering DMA mode while " - "DMA active\n", channel); + "DMA active\n", chan); dma->dma_mode = mode; dma->invalid = 1; @@ -164,42 +164,42 @@ EXPORT_SYMBOL(set_dma_mode); /* Enable DMA channel */ -void enable_dma (dmach_t channel) +void enable_dma (unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (!dma->lock) goto free_dma; if (dma->active == 0) { dma->active = 1; - dma->d_ops->enable(channel, dma); + dma->d_ops->enable(chan, dma); } return; free_dma: - printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan); BUG(); } EXPORT_SYMBOL(enable_dma); /* Disable DMA channel */ -void disable_dma (dmach_t channel) +void disable_dma (unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; if (!dma->lock) goto free_dma; if (dma->active == 1) { dma->active = 0; - dma->d_ops->disable(channel, dma); + dma->d_ops->disable(chan, dma); } return; free_dma: - printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan); BUG(); } EXPORT_SYMBOL(disable_dma); @@ -207,36 +207,36 @@ EXPORT_SYMBOL(disable_dma); /* * Is the specified DMA channel active? */ -int dma_channel_active(dmach_t channel) +int dma_channel_active(unsigned int chan) { - return dma_chan[channel].active; + return dma_chan[chan].active; } EXPORT_SYMBOL(dma_channel_active); -void set_dma_page(dmach_t channel, char pagenr) +void set_dma_page(unsigned int chan, char pagenr) { - printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel); + printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan); } EXPORT_SYMBOL(set_dma_page); -void set_dma_speed(dmach_t channel, int cycle_ns) +void set_dma_speed(unsigned int chan, int cycle_ns) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; int ret = 0; if (dma->d_ops->setspeed) - ret = dma->d_ops->setspeed(channel, dma, cycle_ns); + ret = dma->d_ops->setspeed(chan, dma, cycle_ns); dma->speed = ret; } EXPORT_SYMBOL(set_dma_speed); -int get_dma_residue(dmach_t channel) +int get_dma_residue(unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_chan + chan; int ret = 0; if (dma->d_ops->residue) - ret = dma->d_ops->residue(channel, dma); + ret = dma->d_ops->residue(chan, dma); return ret; } diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index b653e9c..e7b8a6a 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -20,16 +20,16 @@ #include #if 0 -static int fb_dma_request(dmach_t channel, dma_t *dma) +static int fb_dma_request(unsigned int chan, dma_t *dma) { return -EINVAL; } -static void fb_dma_enable(dmach_t channel, dma_t *dma) +static void fb_dma_enable(unsigned int chan, dma_t *dma) { } -static void fb_dma_disable(dmach_t channel, dma_t *dma) +static void fb_dma_disable(unsigned int chan, dma_t *dma) { } diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 7958a30..a86d3ed 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -125,18 +125,18 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) return IRQ_HANDLED; } -static int iomd_request_dma(dmach_t channel, dma_t *dma) +static int iomd_request_dma(unsigned int chan, dma_t *dma) { return request_irq(dma->dma_irq, iomd_dma_handle, IRQF_DISABLED, dma->device_id, dma); } -static void iomd_free_dma(dmach_t channel, dma_t *dma) +static void iomd_free_dma(unsigned int chan, dma_t *dma) { free_irq(dma->dma_irq, dma); } -static void iomd_enable_dma(dmach_t channel, dma_t *dma) +static void iomd_enable_dma(unsigned int chan, dma_t *dma) { unsigned long dma_base = dma->dma_base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; @@ -169,7 +169,7 @@ static void iomd_enable_dma(dmach_t channel, dma_t *dma) enable_irq(dma->dma_irq); } -static void iomd_disable_dma(dmach_t channel, dma_t *dma) +static void iomd_disable_dma(unsigned int chan, dma_t *dma) { unsigned long dma_base = dma->dma_base; unsigned long flags; @@ -181,7 +181,7 @@ static void iomd_disable_dma(dmach_t channel, dma_t *dma) local_irq_restore(flags); } -static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle) +static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle) { int tcr, speed; @@ -197,7 +197,7 @@ static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle) tcr = iomd_readb(IOMD_DMATCR); speed &= 3; - switch (channel) { + switch (chan) { case DMA_0: tcr = (tcr & ~0x03) | speed; break; @@ -236,7 +236,7 @@ static struct fiq_handler fh = { .name = "floppydma" }; -static void floppy_enable_dma(dmach_t channel, dma_t *dma) +static void floppy_enable_dma(unsigned int chan, dma_t *dma) { void *fiqhandler_start; unsigned int fiqhandler_length; @@ -269,13 +269,13 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma) enable_fiq(dma->dma_irq); } -static void floppy_disable_dma(dmach_t channel, dma_t *dma) +static void floppy_disable_dma(unsigned int chan, dma_t *dma) { disable_fiq(dma->dma_irq); release_fiq(&fh); } -static int floppy_get_residue(dmach_t channel, dma_t *dma) +static int floppy_get_residue(unsigned int chan, dma_t *dma) { struct pt_regs regs; get_fiq_regs(®s); @@ -292,7 +292,7 @@ static struct dma_ops floppy_dma_ops = { /* * This is virtual DMA - we don't need anything here. */ -static void sound_enable_disable_dma(dmach_t channel, dma_t *dma) +static void sound_enable_disable_dma(unsigned int chan, dma_t *dma) { } -- cgit v0.10.2 From 3afb6e9c635f735c751148beddc195daec0e35ec Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 16:08:48 +0000 Subject: [ARM] dma: factor out code looking up the DMA channel This is a preparitory patch to allow us to easily change the way we add and lookup DMA channel structures. Signed-off-by: Russell King diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index c31bf00..0ffea3f 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -25,6 +25,16 @@ EXPORT_SYMBOL(dma_spin_lock); static dma_t dma_chan[MAX_DMA_CHANNELS]; +static inline dma_t *dma_channel(unsigned int chan) +{ + dma_t *dma = dma_chan + chan; + + if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) + return NULL; + + return dma; +} + /* * Request DMA channel * @@ -32,10 +42,10 @@ static dma_t dma_chan[MAX_DMA_CHANNELS]; */ int request_dma(unsigned int chan, const char *device_id) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); int ret; - if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) + if (!dma) goto bad_dma; if (xchg(&dma->lock, 1) != 0) @@ -70,9 +80,9 @@ EXPORT_SYMBOL(request_dma); */ void free_dma(unsigned int chan) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); - if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) + if (!dma) goto bad_dma; if (dma->active) { @@ -99,7 +109,7 @@ EXPORT_SYMBOL(free_dma); */ void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA SG while " @@ -117,7 +127,7 @@ EXPORT_SYMBOL(set_dma_sg); */ void __set_dma_addr (unsigned int chan, void *addr) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA address while " @@ -135,7 +145,7 @@ EXPORT_SYMBOL(__set_dma_addr); */ void set_dma_count (unsigned int chan, unsigned long count) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA count while " @@ -151,7 +161,7 @@ EXPORT_SYMBOL(set_dma_count); */ void set_dma_mode (unsigned int chan, dmamode_t mode) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA mode while " @@ -166,7 +176,7 @@ EXPORT_SYMBOL(set_dma_mode); */ void enable_dma (unsigned int chan) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (!dma->lock) goto free_dma; @@ -187,7 +197,7 @@ EXPORT_SYMBOL(enable_dma); */ void disable_dma (unsigned int chan) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); if (!dma->lock) goto free_dma; @@ -209,7 +219,8 @@ EXPORT_SYMBOL(disable_dma); */ int dma_channel_active(unsigned int chan) { - return dma_chan[chan].active; + dma_t *dma = dma_channel(chan); + return dma->active; } EXPORT_SYMBOL(dma_channel_active); @@ -221,7 +232,7 @@ EXPORT_SYMBOL(set_dma_page); void set_dma_speed(unsigned int chan, int cycle_ns) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); int ret = 0; if (dma->d_ops->setspeed) @@ -232,7 +243,7 @@ EXPORT_SYMBOL(set_dma_speed); int get_dma_residue(unsigned int chan) { - dma_t *dma = dma_chan + chan; + dma_t *dma = dma_channel(chan); int ret = 0; if (dma->d_ops->residue) @@ -247,5 +258,4 @@ static int __init init_dma(void) arch_dma_init(dma_chan); return 0; } - core_initcall(init_dma); -- cgit v0.10.2 From 2f757f2ab7411cf0e2779012d8cda0cbf2f80d26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 16:33:30 +0000 Subject: [ARM] dma: rejig DMA initialization Rather than having the central DMA multiplexer call the architecture specific DMA initialization function, have each architecture DMA initialization function use core_initcall(), and register each DMA channel separately with the multiplexer. This removes the array of dma structures in the central multiplexer, replacing it with an array of pointers instead; this is more flexible since it allows the drivers to wrap the DMA structure (eventually allowing us to transition non-ISA DMA drivers away.) Signed-off-by: Russell King diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 281ae7e..38a3693 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -48,10 +48,12 @@ struct dma_struct { struct dma_ops *d_ops; }; -/* Prototype: void arch_dma_init(dma) - * Purpose : Initialise architecture specific DMA - * Params : dma - pointer to array of DMA structures +/* + * isa_dma_add - add an ISA-style DMA channel */ -extern void arch_dma_init(dma_t *dma); +extern int isa_dma_add(unsigned int, dma_t *dma); -extern void isa_init_dma(dma_t *dma); +/* + * Add the ISA DMA controller. Always takes channels 0-7. + */ +extern void isa_init_dma(void); diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 29eca48..da02a7f 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -160,7 +160,12 @@ static struct resource dma_resources[] = { { .end = 0x048f } }; -void __init isa_init_dma(dma_t *dma) +static dma_t isa_dma[8]; + +/* + * ISA DMA always starts at channel 0 + */ +void __init isa_init_dma(void) { /* * Try to autodetect presence of an ISA DMA controller. @@ -178,10 +183,10 @@ void __init isa_init_dma(dma_t *dma) outb(0xaa, 0x00); if (inb(0) == 0x55 && inb(0) == 0xaa) { - int chan, i; + unsigned int chan, i; for (chan = 0; chan < 8; chan++) { - dma[chan].d_ops = &isa_dma_ops; + isa_dma[chan].d_ops = &isa_dma_ops; isa_disable_dma(chan, NULL); } @@ -217,5 +222,12 @@ void __init isa_init_dma(dma_t *dma) for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); + + for (chan = 0; chan < 8; chan++) { + int ret = isa_dma_add(chan, &isa_dma[chan]); + if (ret) + printk(KERN_ERR "ISADMA%u: unable to register: %d\n", + chan, ret); + } } } diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 0ffea3f..aab24f0 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -23,16 +23,24 @@ DEFINE_SPINLOCK(dma_spin_lock); EXPORT_SYMBOL(dma_spin_lock); -static dma_t dma_chan[MAX_DMA_CHANNELS]; +static dma_t *dma_chan[MAX_DMA_CHANNELS]; static inline dma_t *dma_channel(unsigned int chan) { - dma_t *dma = dma_chan + chan; - - if (chan >= MAX_DMA_CHANNELS || !dma->d_ops) + if (chan >= MAX_DMA_CHANNELS) return NULL; - return dma; + return dma_chan[chan]; +} + +int __init isa_dma_add(unsigned int chan, dma_t *dma) +{ + if (!dma->d_ops) + return -EINVAL; + if (dma_chan[chan]) + return -EBUSY; + dma_chan[chan] = dma; + return 0; } /* @@ -252,10 +260,3 @@ int get_dma_residue(unsigned int chan) return ret; } EXPORT_SYMBOL(get_dma_residue); - -static int __init init_dma(void) -{ - arch_dma_init(dma_chan); - return 0; -} -core_initcall(init_dma); diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index e7b8a6a..fdd94b1 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -41,7 +41,7 @@ static struct dma_ops fb_dma_ops = { }; #endif -void __init arch_dma_init(dma_t *dma) +static int __init fb_dma_init(void) { #if 0 dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops; @@ -49,6 +49,8 @@ void __init arch_dma_init(dma_t *dma) #endif #ifdef CONFIG_ISA_DMA if (footbridge_cfn_mode()) - isa_init_dma(dma + _ISA_DMA(0)); + isa_init_dma(); #endif + return 0; } +core_initcall(fb_dma_init); diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index a86d3ed..efcf671 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -302,8 +302,22 @@ static struct dma_ops sound_dma_ops = { .disable = sound_enable_disable_dma, }; -void __init arch_dma_init(dma_t *dma) +static dma_t iomd_dma[6]; + +static dma_t floppy_dma = { + .dma_irq = FIQ_FLOPPYDATA, + .d_ops = &floppy_dma_ops, +}; + +static dma_t sound_dma = { + .d_ops = &sound_dma_ops, +}; + +static int __init rpc_dma_init(void) { + unsigned int i; + int ret; + iomd_writeb(0, IOMD_IO0CR); iomd_writeb(0, IOMD_IO1CR); iomd_writeb(0, IOMD_IO2CR); @@ -311,31 +325,39 @@ void __init arch_dma_init(dma_t *dma) iomd_writeb(0xa0, IOMD_DMATCR); - dma[DMA_0].dma_base = IOMD_IO0CURA; - dma[DMA_0].dma_irq = IRQ_DMA0; - dma[DMA_0].d_ops = &iomd_dma_ops; - dma[DMA_1].dma_base = IOMD_IO1CURA; - dma[DMA_1].dma_irq = IRQ_DMA1; - dma[DMA_1].d_ops = &iomd_dma_ops; - dma[DMA_2].dma_base = IOMD_IO2CURA; - dma[DMA_2].dma_irq = IRQ_DMA2; - dma[DMA_2].d_ops = &iomd_dma_ops; - dma[DMA_3].dma_base = IOMD_IO3CURA; - dma[DMA_3].dma_irq = IRQ_DMA3; - dma[DMA_3].d_ops = &iomd_dma_ops; - dma[DMA_S0].dma_base = IOMD_SD0CURA; - dma[DMA_S0].dma_irq = IRQ_DMAS0; - dma[DMA_S0].d_ops = &iomd_dma_ops; - dma[DMA_S1].dma_base = IOMD_SD1CURA; - dma[DMA_S1].dma_irq = IRQ_DMAS1; - dma[DMA_S1].d_ops = &iomd_dma_ops; - dma[DMA_VIRTUAL_FLOPPY].dma_irq = FIQ_FLOPPYDATA; - dma[DMA_VIRTUAL_FLOPPY].d_ops = &floppy_dma_ops; - dma[DMA_VIRTUAL_SOUND].d_ops = &sound_dma_ops; - /* * Setup DMA channels 2,3 to be for podules * and channels 0,1 for internal devices */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); + + iomd_dma[DMA_0].dma_base = IOMD_IO0CURA; + iomd_dma[DMA_0].dma_irq = IRQ_DMA0; + iomd_dma[DMA_1].dma_base = IOMD_IO1CURA; + iomd_dma[DMA_1].dma_irq = IRQ_DMA1; + iomd_dma[DMA_2].dma_base = IOMD_IO2CURA; + iomd_dma[DMA_2].dma_irq = IRQ_DMA2; + iomd_dma[DMA_3].dma_base = IOMD_IO3CURA; + iomd_dma[DMA_3].dma_irq = IRQ_DMA3; + iomd_dma[DMA_S0].dma_base = IOMD_SD0CURA; + iomd_dma[DMA_S0].dma_irq = IRQ_DMAS0; + iomd_dma[DMA_S1].dma_base = IOMD_SD1CURA; + iomd_dma[DMA_S1].dma_irq = IRQ_DMAS1; + + for (i = DMA_0; i <= DMA_S1; i++) { + iomd_dma[i].d_ops = &iomd_dma_ops; + + ret = isa_dma_add(i, &iomd_dma[i]); + if (ret) + printk("IOMDDMA%u: unable to register: %d\n", i, ret); + } + + ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma); + if (ret) + printk("IOMDFLOPPY: unable to register: %d\n", ret); + ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma); + if (ret) + printk("IOMDSOUND: unable to register: %d\n", ret); + return 0; } +core_initcall(rpc_dma_init); diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c index 6774b8d..10b5b8b 100644 --- a/arch/arm/mach-shark/dma.c +++ b/arch/arm/mach-shark/dma.c @@ -13,9 +13,11 @@ #include #include -void __init arch_dma_init(dma_t *dma) +static int __init shark_dma_init(void) { #ifdef CONFIG_ISA_DMA - isa_init_dma(dma); + isa_init_dma(); #endif + return 0; } +core_initcall(shark_dma_init); -- cgit v0.10.2 From ad9dd94c384f7ee37b798a9349b8c42da8fa99ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 17:35:48 +0000 Subject: [ARM] dma: move RiscPC specific DMA data out of dma_struct Separate the RiscPC specific (IOMD and floppy FIQ) data out of the core DMA structure by making the IOMD and floppy DMA supersets. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 38a3693..4326738 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -40,14 +40,22 @@ struct dma_struct { unsigned int lock; /* Device is allocated */ const char *device_id; /* Device name */ - unsigned int dma_base; /* Controller base address */ - int dma_irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ - unsigned int state; - struct dma_ops *d_ops; }; +struct floppy_dma { + struct dma_struct dma; + unsigned int fiq; +}; + +struct iomd_dma { + struct dma_struct dma; + unsigned int state; + unsigned long base; /* Controller base address */ + int irq; /* Controller IRQ */ + struct scatterlist cur_sg; /* Current controller buffer */ +}; + /* * isa_dma_add - add an ISA-style DMA channel */ diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index efcf671..0163592 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -44,15 +44,15 @@ typedef enum { #define CR (IOMD_IO0CR - IOMD_IO0CURA) #define ST (IOMD_IO0ST - IOMD_IO0CURA) -static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) +static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) { unsigned long end, offset, flags = 0; - if (dma->sg) { - sg->dma_address = dma->sg->dma_address; + if (idma->dma.sg) { + sg->dma_address = idma->dma.sg->dma_address; offset = sg->dma_address & ~PAGE_MASK; - end = offset + dma->sg->length; + end = offset + idma->dma.sg->length; if (end > PAGE_SIZE) end = PAGE_SIZE; @@ -62,15 +62,15 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) sg->length = end - TRANSFER_SIZE; - dma->sg->length -= end - offset; - dma->sg->dma_address += end - offset; + idma->dma.sg->length -= end - offset; + idma->dma.sg->dma_address += end - offset; - if (dma->sg->length == 0) { - if (dma->sgcount > 1) { - dma->sg++; - dma->sgcount--; + if (idma->dma.sg->length == 0) { + if (idma->dma.sgcount > 1) { + idma->dma.sg++; + idma->dma.sgcount--; } else { - dma->sg = NULL; + idma->dma.sg = NULL; flags |= DMA_END_S; } } @@ -85,8 +85,8 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { - dma_t *dma = (dma_t *)dev_id; - unsigned long base = dma->dma_base; + struct iomd_dma *idma = dev_id; + unsigned long base = idma->base; do { unsigned int status; @@ -95,31 +95,31 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) if (!(status & DMA_ST_INT)) return IRQ_HANDLED; - if ((dma->state ^ status) & DMA_ST_AB) - iomd_get_next_sg(&dma->cur_sg, dma); + if ((idma->state ^ status) & DMA_ST_AB) + iomd_get_next_sg(&idma->cur_sg, idma); switch (status & (DMA_ST_OFL | DMA_ST_AB)) { case DMA_ST_OFL: /* OIA */ case DMA_ST_AB: /* .IB */ - iomd_writel(dma->cur_sg.dma_address, base + CURA); - iomd_writel(dma->cur_sg.length, base + ENDA); - dma->state = DMA_ST_AB; + iomd_writel(idma->cur_sg.dma_address, base + CURA); + iomd_writel(idma->cur_sg.length, base + ENDA); + idma->state = DMA_ST_AB; break; case DMA_ST_OFL | DMA_ST_AB: /* OIB */ case 0: /* .IA */ - iomd_writel(dma->cur_sg.dma_address, base + CURB); - iomd_writel(dma->cur_sg.length, base + ENDB); - dma->state = 0; + iomd_writel(idma->cur_sg.dma_address, base + CURB); + iomd_writel(idma->cur_sg.length, base + ENDB); + idma->state = 0; break; } if (status & DMA_ST_OFL && - dma->cur_sg.length == (DMA_END_S|DMA_END_L)) + idma->cur_sg.length == (DMA_END_S|DMA_END_L)) break; } while (1); - dma->state = ~DMA_ST_AB; + idma->state = ~DMA_ST_AB; disable_irq(irq); return IRQ_HANDLED; @@ -127,56 +127,62 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) static int iomd_request_dma(unsigned int chan, dma_t *dma) { - return request_irq(dma->dma_irq, iomd_dma_handle, - IRQF_DISABLED, dma->device_id, dma); + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + + return request_irq(idma->irq, iomd_dma_handle, + IRQF_DISABLED, idma->dma.device_id, idma); } static void iomd_free_dma(unsigned int chan, dma_t *dma) { - free_irq(dma->dma_irq, dma); + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + + free_irq(idma->irq, idma); } static void iomd_enable_dma(unsigned int chan, dma_t *dma) { - unsigned long dma_base = dma->dma_base; + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + unsigned long dma_base = idma->base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; - if (dma->invalid) { - dma->invalid = 0; + if (idma->dma.invalid) { + idma->dma.invalid = 0; /* * Cope with ISA-style drivers which expect cache * coherence. */ - if (!dma->sg) { - dma->sg = &dma->buf; - dma->sgcount = 1; - dma->buf.length = dma->count; - dma->buf.dma_address = dma_map_single(NULL, - dma->addr, dma->count, - dma->dma_mode == DMA_MODE_READ ? + if (!idma->dma.sg) { + idma->dma.sg = &idma->dma.buf; + idma->dma.sgcount = 1; + idma->dma.buf.length = idma->dma.count; + idma->dma.buf.dma_address = dma_map_single(NULL, + idma->dma.addr, idma->dma.count, + idma->dma.dma_mode == DMA_MODE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } iomd_writeb(DMA_CR_C, dma_base + CR); - dma->state = DMA_ST_AB; + idma->state = DMA_ST_AB; } - - if (dma->dma_mode == DMA_MODE_READ) + + if (idma->dma.dma_mode == DMA_MODE_READ) ctrl |= DMA_CR_D; iomd_writeb(ctrl, dma_base + CR); - enable_irq(dma->dma_irq); + enable_irq(idma->irq); } static void iomd_disable_dma(unsigned int chan, dma_t *dma) { - unsigned long dma_base = dma->dma_base; + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + unsigned long dma_base = idma->base; unsigned long flags; local_irq_save(flags); - if (dma->state != ~DMA_ST_AB) - disable_irq(dma->dma_irq); + if (idma->state != ~DMA_ST_AB) + disable_irq(idma->irq); iomd_writeb(0, dma_base + CR); local_irq_restore(flags); } @@ -238,14 +244,15 @@ static struct fiq_handler fh = { static void floppy_enable_dma(unsigned int chan, dma_t *dma) { + struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma); void *fiqhandler_start; unsigned int fiqhandler_length; struct pt_regs regs; - if (dma->sg) + if (fdma->dma.sg) BUG(); - if (dma->dma_mode == DMA_MODE_READ) { + if (fdma->dma.dma_mode == DMA_MODE_READ) { extern unsigned char floppy_fiqin_start, floppy_fiqin_end; fiqhandler_start = &floppy_fiqin_start; fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start; @@ -255,8 +262,8 @@ static void floppy_enable_dma(unsigned int chan, dma_t *dma) fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start; } - regs.ARM_r9 = dma->count; - regs.ARM_r10 = (unsigned long)dma->addr; + regs.ARM_r9 = fdma->dma.count; + regs.ARM_r10 = (unsigned long)fdma->dma.addr; regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE; if (claim_fiq(&fh)) { @@ -266,12 +273,13 @@ static void floppy_enable_dma(unsigned int chan, dma_t *dma) set_fiq_handler(fiqhandler_start, fiqhandler_length); set_fiq_regs(®s); - enable_fiq(dma->dma_irq); + enable_fiq(fdma->fiq); } static void floppy_disable_dma(unsigned int chan, dma_t *dma) { - disable_fiq(dma->dma_irq); + struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma); + disable_fiq(fdma->fiq); release_fiq(&fh); } @@ -302,11 +310,13 @@ static struct dma_ops sound_dma_ops = { .disable = sound_enable_disable_dma, }; -static dma_t iomd_dma[6]; +static struct iomd_dma iomd_dma[6]; -static dma_t floppy_dma = { - .dma_irq = FIQ_FLOPPYDATA, - .d_ops = &floppy_dma_ops, +static struct floppy_dma floppy_dma = { + .dma = { + .d_ops = &floppy_dma_ops, + }, + .fiq = FIQ_FLOPPYDATA, }; static dma_t sound_dma = { @@ -331,28 +341,28 @@ static int __init rpc_dma_init(void) */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); - iomd_dma[DMA_0].dma_base = IOMD_IO0CURA; - iomd_dma[DMA_0].dma_irq = IRQ_DMA0; - iomd_dma[DMA_1].dma_base = IOMD_IO1CURA; - iomd_dma[DMA_1].dma_irq = IRQ_DMA1; - iomd_dma[DMA_2].dma_base = IOMD_IO2CURA; - iomd_dma[DMA_2].dma_irq = IRQ_DMA2; - iomd_dma[DMA_3].dma_base = IOMD_IO3CURA; - iomd_dma[DMA_3].dma_irq = IRQ_DMA3; - iomd_dma[DMA_S0].dma_base = IOMD_SD0CURA; - iomd_dma[DMA_S0].dma_irq = IRQ_DMAS0; - iomd_dma[DMA_S1].dma_base = IOMD_SD1CURA; - iomd_dma[DMA_S1].dma_irq = IRQ_DMAS1; + iomd_dma[DMA_0].base = IOMD_IO0CURA; + iomd_dma[DMA_0].irq = IRQ_DMA0; + iomd_dma[DMA_1].base = IOMD_IO1CURA; + iomd_dma[DMA_1].irq = IRQ_DMA1; + iomd_dma[DMA_2].base = IOMD_IO2CURA; + iomd_dma[DMA_2].irq = IRQ_DMA2; + iomd_dma[DMA_3].base = IOMD_IO3CURA; + iomd_dma[DMA_3].irq = IRQ_DMA3; + iomd_dma[DMA_S0].base = IOMD_SD0CURA; + iomd_dma[DMA_S0].irq = IRQ_DMAS0; + iomd_dma[DMA_S1].base = IOMD_SD1CURA; + iomd_dma[DMA_S1].irq = IRQ_DMAS1; for (i = DMA_0; i <= DMA_S1; i++) { - iomd_dma[i].d_ops = &iomd_dma_ops; + iomd_dma[i].dma.d_ops = &iomd_dma_ops; - ret = isa_dma_add(i, &iomd_dma[i]); + ret = isa_dma_add(i, &iomd_dma[i].dma); if (ret) printk("IOMDDMA%u: unable to register: %d\n", i, ret); } - ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma); + ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma); if (ret) printk("IOMDFLOPPY: unable to register: %d\n", ret); ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma); -- cgit v0.10.2 From 8c56afcbea22e472d3bfa8ddf06f23cd6bc56826 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 11 Dec 2008 14:50:39 +0000 Subject: [ARM] dma: constify dma controller name and dma ops Signed-off-by: Russell King diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 4326738..3122ada 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -21,7 +21,7 @@ struct dma_ops { void (*disable)(unsigned int, dma_t *); /* mandatory */ int (*residue)(unsigned int, dma_t *); /* optional */ int (*setspeed)(unsigned int, dma_t *, int); /* optional */ - char *type; + const char *type; }; struct dma_struct { @@ -40,7 +40,7 @@ struct dma_struct { unsigned int lock; /* Device is allocated */ const char *device_id; /* Device name */ - struct dma_ops *d_ops; + const struct dma_ops *d_ops; }; struct floppy_dma { -- cgit v0.10.2 From d667522fdf637ef1b425518afe11aedba80364b2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 17:50:25 +0000 Subject: [ARM] dma: ensure that the single entry sg is properly initialized Signed-off-by: Russell King diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index aab24f0..e7828fc 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -37,6 +38,9 @@ int __init isa_dma_add(unsigned int chan, dma_t *dma) { if (!dma->d_ops) return -EINVAL; + + sg_init_table(&dma->buf, 1); + if (dma_chan[chan]) return -EBUSY; dma_chan[chan] = dma; -- cgit v0.10.2 From 9e28d7e8c5422a47db886c4104221ea165595de0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 19:03:58 +0000 Subject: [ARM] dma: convert IOMD DMA to use sg_next() ... rather than incrementing the sg pointer. Signed-off-by: Russell King diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 0163592..a5987bb 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -67,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) if (idma->dma.sg->length == 0) { if (idma->dma.sgcount > 1) { - idma->dma.sg++; + idma->dma.sg = sg_next(idma->dma.sg); idma->dma.sgcount--; } else { idma->dma.sg = NULL; -- cgit v0.10.2 From f6718653361e8f8a6aac9946822aa2090edf4f37 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Dec 2008 19:25:28 +0000 Subject: [ARM] dma: pata_icside's contiguous sg array is now redundant Now that the IOMD DMA code walks the scatterlist using sg_next, converting the sg list into a contiguous list is no longer required. Signed-off-by: Russell King diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index cf9e984..63121f4 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -57,7 +57,6 @@ struct pata_icside_state { u8 disabled; unsigned int speed[ATA_MAX_DEVICES]; } port[2]; - struct scatterlist sg[PATA_ICSIDE_MAX_SG]; }; struct pata_icside_info { @@ -222,9 +221,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pata_icside_state *state = ap->host->private_data; - struct scatterlist *sg, *rsg = state->sg; unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; - unsigned int si; /* * We are simplex; BUG if we try to fiddle with DMA @@ -233,20 +230,12 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) BUG_ON(dma_channel_active(state->dma)); /* - * Copy ATAs scattered sg list into a contiguous array of sg - */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - memcpy(rsg, sg, sizeof(*sg)); - rsg++; - } - - /* * Route the DMA signals to the correct interface */ writeb(state->port[ap->port_no].port_sel, state->ioc_base); set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); - set_dma_sg(state->dma, state->sg, rsg - state->sg); + set_dma_sg(state->dma, qc->sg, qc->n_elem); set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); /* issue r/w command */ -- cgit v0.10.2 From 5369bea7d7db1d95f63907f3470e23d32930be98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 11 Dec 2008 16:37:06 +0000 Subject: [ARM] dma: Use sensible DMA parameters for Acorn drivers The hardware supports transfers up to a page boundary per buffer. Currently, we work around that in the DMA code by splitting each buffer up as we run through the scatterlist. Avoid this by telling the block layers about the hardware restriction. Eventually, this will allow us to phase out the splitting code, but not until the old IDE layer allows us to control the value it gives to blk_queue_segment_boundary(). Signed-off-by: Russell King diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h index bad7205..67bfc67 100644 --- a/arch/arm/mach-rpc/include/mach/isa-dma.h +++ b/arch/arm/mach-rpc/include/mach/isa-dma.h @@ -23,5 +23,7 @@ #define DMA_FLOPPY DMA_VIRTUAL_FLOPPY +#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1) + #endif /* _ASM_ARCH_DMA_H */ diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 63121f4..d7bc925 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -45,8 +45,6 @@ static const struct portinfo pata_icside_portinfo_v6_2 = { .stepping = 6, }; -#define PATA_ICSIDE_MAX_SG 128 - struct pata_icside_state { void __iomem *irq_port; void __iomem *ioc_base; @@ -295,8 +293,8 @@ static int icside_dma_init(struct pata_icside_info *info) static struct scsi_host_template pata_icside_sht = { ATA_BASE_SHT(DRV_NAME), - .sg_tablesize = PATA_ICSIDE_MAX_SG, - .dma_boundary = ~0, /* no dma boundaries */ + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + .dma_boundary = IOMD_DMA_BOUNDARY, }; static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index 68a6412..8ee01b9 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c @@ -390,7 +390,8 @@ static struct scsi_host_template cumanascsi2_template = { .eh_abort_handler = fas216_eh_abort, .can_queue = 1, .this_id = 7, - .sg_tablesize = SG_ALL, + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + .dma_boundary = IOMD_DMA_BOUNDARY, .cmd_per_lun = 1, .use_clustering = DISABLE_CLUSTERING, .proc_name = "cumanascsi2", diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index bb2477b..d843513 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -508,7 +508,8 @@ static struct scsi_host_template eesox_template = { .eh_abort_handler = fas216_eh_abort, .can_queue = 1, .this_id = 7, - .sg_tablesize = SG_ALL, + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + .dma_boundary = IOMD_DMA_BOUNDARY, .cmd_per_lun = 1, .use_clustering = DISABLE_CLUSTERING, .proc_name = "eesox", diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index d9a546d..e2297b4 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c @@ -302,7 +302,8 @@ static struct scsi_host_template powertecscsi_template = { .can_queue = 8, .this_id = 7, - .sg_tablesize = SG_ALL, + .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, + .dma_boundary = IOMD_DMA_BOUNDARY, .cmd_per_lun = 2, .use_clustering = ENABLE_CLUSTERING, .proc_name = "powertec", -- cgit v0.10.2 From bc6447b8e4fdb3306ee6381df9650a1a8aa57c5b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 2 Jan 2009 12:18:53 +0000 Subject: [ARM] dma: make DMA_MODE_xxx reflect ISA DMA settings Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index c5557a6..59f59c6 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -26,12 +26,15 @@ */ typedef unsigned int dmamode_t; -#define DMA_MODE_MASK 3 +/* + * The DMA modes reflect the settings for the ISA DMA controller + */ +#define DMA_MODE_MASK 0xcc -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_CASCADE 2 -#define DMA_AUTOINIT 4 +#define DMA_MODE_READ 0x44 +#define DMA_MODE_WRITE 0x48 +#define DMA_MODE_CASCADE 0xc0 +#define DMA_AUTOINIT 0x10 extern spinlock_t dma_spin_lock; diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index da02a7f..0e88e46 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -24,11 +24,6 @@ #include #include -#define ISA_DMA_MODE_READ 0x44 -#define ISA_DMA_MODE_WRITE 0x48 -#define ISA_DMA_MODE_CASCADE 0xc0 -#define ISA_DMA_AUTOINIT 0x10 - #define ISA_DMA_MASK 0 #define ISA_DMA_MODE 1 #define ISA_DMA_CLRFF 2 @@ -67,20 +62,17 @@ static void isa_enable_dma(unsigned int chan, dma_t *dma) unsigned int mode; enum dma_data_direction direction; - mode = chan & 3; + mode = (chan & 3) | dma->dma_mode; switch (dma->dma_mode & DMA_MODE_MASK) { case DMA_MODE_READ: - mode |= ISA_DMA_MODE_READ; direction = DMA_FROM_DEVICE; break; case DMA_MODE_WRITE: - mode |= ISA_DMA_MODE_WRITE; direction = DMA_TO_DEVICE; break; case DMA_MODE_CASCADE: - mode |= ISA_DMA_MODE_CASCADE; direction = DMA_BIDIRECTIONAL; break; @@ -121,9 +113,6 @@ static void isa_enable_dma(unsigned int chan, dma_t *dma) outb(length, isa_dma_port[chan][ISA_DMA_COUNT]); outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]); - if (dma->dma_mode & DMA_AUTOINIT) - mode |= ISA_DMA_AUTOINIT; - outb(mode, isa_dma_port[chan][ISA_DMA_MODE]); dma->invalid = 0; } -- cgit v0.10.2 From 4e57ea9a2e8e807e20f64d5b53fbee2c7c9e87ae Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 2 Jan 2009 12:34:31 +0000 Subject: [ARM] dma: remove usage of dmamode_t from MXC platform support Signed-off-by: Russell King diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 2142743..92bc4f6 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -114,7 +114,7 @@ struct imx_dma_channel { void (*err_handler) (int, void *, int errcode); void (*prog_handler) (int, void *, struct scatterlist *); void *data; - dmamode_t dma_mode; + unsigned int dma_mode; struct scatterlist *sg; unsigned int resbytes; int dma_num; @@ -193,7 +193,7 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) int imx_dma_setup_single(int channel, dma_addr_t dma_address, unsigned int dma_length, unsigned int dev_addr, - dmamode_t dmamode) + unsigned int dmamode) { struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; @@ -288,7 +288,7 @@ int imx_dma_setup_sg(int channel, struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, unsigned int dev_addr, - dmamode_t dmamode) + unsigned int dmamode) { struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h index 6cc6f0c..c162920 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h @@ -54,12 +54,12 @@ imx_dma_config_burstlen(int channel, unsigned int burstlen); int imx_dma_setup_single(int channel, dma_addr_t dma_address, unsigned int dma_length, unsigned int dev_addr, - dmamode_t dmamode); + unsigned int dmamode); int imx_dma_setup_sg(int channel, struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, dmamode_t dmamode); + unsigned int dev_addr, unsigned int dmamode); int imx_dma_setup_handlers(int channel, -- cgit v0.10.2 From f0ffc816250a8cc28e6824326e2d58333e058eca Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 2 Jan 2009 12:34:55 +0000 Subject: [ARM] dma: remove dmamode_t typedef Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 59f59c6..7edf353 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -22,11 +22,6 @@ #include /* - * DMA modes - */ -typedef unsigned int dmamode_t; - -/* * The DMA modes reflect the settings for the ISA DMA controller */ #define DMA_MODE_MASK 0xcc @@ -125,7 +120,7 @@ extern void set_dma_count(unsigned int chan, unsigned long count); * DMA transfer direction immediately, but defer it to the * enable_dma(). */ -extern void set_dma_mode(unsigned int chan, dmamode_t mode); +extern void set_dma_mode(unsigned int chan, unsigned int mode); /* Set the transfer speed for this channel */ diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 3122ada..5166145 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -34,7 +34,7 @@ struct dma_struct { unsigned int active:1; /* Transfer active */ unsigned int invalid:1; /* Address/Count changed */ - dmamode_t dma_mode; /* DMA mode */ + unsigned int dma_mode; /* DMA mode */ int speed; /* DMA speed */ unsigned int lock; /* Device is allocated */ diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index e7828fc..7d5b9fb 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -171,7 +171,7 @@ EXPORT_SYMBOL(set_dma_count); /* Set DMA direction mode */ -void set_dma_mode (unsigned int chan, dmamode_t mode) +void set_dma_mode (unsigned int chan, unsigned int mode) { dma_t *dma = dma_channel(chan); -- cgit v0.10.2 From 0f6ff0f06cc126e8dfaa20c8c6da53537e352378 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Nov 2008 00:58:38 +0100 Subject: [ARM] pxa: PalmT5 initial support Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/MAINTAINERS b/MAINTAINERS index 3fe4dc2..a267659 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -622,7 +622,7 @@ P: Dirk Opfer M: dirk@opfer-online.de S: Maintained -ARM/PALMTX SUPPORT +ARM/PALMTX,PALMT5 SUPPORT P: Marek Vasut M: marek.vasut@gmail.com W: http://hackndev.com diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8eea730..9223ba6 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -319,6 +319,16 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMT5 + bool "Palm Tungsten|T5" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm Tungsten|T5 + handheld computer. + config MACH_PALMTX bool "Palm T|X" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 7b28bb5..0d0afe8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o obj-$(CONFIG_ARCH_VIPER) += viper.o diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h new file mode 100644 index 0000000..94db288 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -0,0 +1,84 @@ +/* + * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer + * + * Authors: Ales Snuparek + * Marek Vasut + * Justin Kendrick + * RichardT5 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMT5_H_ +#define _INCLUDE_PALMT5_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMT5_GPIO_RESET 1 + +#define GPIO_NR_PALMT5_POWER_DETECT 90 +#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMT5_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMT5_SD_DETECT_N 14 +#define GPIO_NR_PALMT5_SD_POWER 114 +#define GPIO_NR_PALMT5_SD_READONLY 115 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMT5_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMT5_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMT5_USB_DETECT_N 15 +#define GPIO_NR_PALMT5_USB_POWER 95 +#define GPIO_NR_PALMT5_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMT5_BL_POWER 84 +#define GPIO_NR_PALMT5_LCD_POWER 96 + +/* BLUETOOTH */ +#define GPIO_NR_PALMT5_BT_POWER 17 +#define GPIO_NR_PALMT5_BT_RESET 83 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMT5_PHYS_RAM_START 0xa0000000 +#define PALMT5_PHYS_IO_START 0x40000000 + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + +/* BATTERY */ +#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMT5_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMT5_MAX_INTENSITY 0xFE +#define PALMT5_DEFAULT_INTENSITY 0x7E +#define PALMT5_LIMIT_MASK 0x7F +#define PALMT5_PRESCALER 0x3F +#define PALMT5_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c new file mode 100644 index 0000000..51b4a60 --- /dev/null +++ b/arch/arm/mach-pxa/palmt5.c @@ -0,0 +1,497 @@ +/* + * Hardware definitions for Palm Tungsten|T5 + * + * Author: Marek Vasut + * + * Based on work of: + * Ales Snuparek + * Justin Kendrick + * RichardT5 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmt5_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO115_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO40_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO95_GPIO, /* usb power */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* MISC */ + GPIO10_GPIO, /* hotsync button */ + GPIO90_GPIO, /* power detect */ + GPIO107_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), + palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMT5_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMT5_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +err: + return err; +} + +static void palmt5_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMT5_SD_READONLY); + gpio_free(GPIO_NR_PALMT5_SD_POWER); + free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data); + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +} + +static void palmt5_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmt5_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY); +} + +static struct pxamci_platform_data palmt5_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmt5_mci_power, + .get_ro = palmt5_mci_get_ro, + .init = palmt5_mci_init, + .exit = palmt5_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmt5_matrix_keys[] = { + KEY(0, 0, KEY_POWER), + KEY(0, 1, KEY_F1), + KEY(0, 2, KEY_ENTER), + + KEY(1, 0, KEY_F2), + KEY(1, 1, KEY_F3), + KEY(1, 2, KEY_F4), + + KEY(2, 0, KEY_UP), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_RIGHT), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmt5_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmt5_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, +}; + +static struct gpio_keys_platform_data palmt5_pxa_keys_data = { + .buttons = palmt5_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons), +}; + +static struct platform_device palmt5_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmt5_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmt5_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMT5_BL_POWER); +err: + return ret; +} + +static int palmt5_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); + return brightness; +} + +static void palmt5_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_BL_POWER); + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmt5_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMT5_MAX_INTENSITY, + .dft_brightness = PALMT5_MAX_INTENSITY, + .pwm_period_ns = PALMT5_PERIOD_NS, + .init = palmt5_backlight_init, + .notify = palmt5_backlight_notify, + .exit = palmt5_backlight_exit, +}; + +static struct platform_device palmt5_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmt5_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmt5_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +err: + return err; +} + +static void palmt5_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +} + +static void palmt5_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmt5_ficp_platform_data = { + .startup = palmt5_irda_startup, + .shutdown = palmt5_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmt5_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT); + if (ret) + goto err2; + + return 0; +err2: + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +err1: + return ret; +} + +static int palmt5_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +} + +static char *palmt5_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmt5_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmt5_supplicants, + .num_supplicants = ARRAY_SIZE(palmt5_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMT5_BAT_MAX_VOLTAGE, + .min_voltage = PALMT5_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmt5_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmt5_lcd_screen = { + .modes = palmt5_lcd_modes, + .num_modes = ARRAY_SIZE(palmt5_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmt5_pxa_keys, +#endif + &palmt5_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmt5_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); + gpio_free(GPIO_NR_PALMT5_USB_POWER); + } +} + +static void __init palmt5_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); + + set_pxa_fb_info(&palmt5_lcd_screen); + pxa_set_mci_info(&palmt5_mci_platform_data); + palmt5_udc_init(); + pxa_set_udc_info(&palmt5_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmt5_ficp_platform_data); + pxa_set_keypad_info(&palmt5_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMT5, "Palm Tungsten|T5") + .phys_io = PALMT5_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmt5_init +MACHINE_END -- cgit v0.10.2 From a645072a608356990b2737a48ecc1bfb66981599 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Nov 2008 22:50:46 +0100 Subject: [ARM] pxa: PalmLD initial support Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/MAINTAINERS b/MAINTAINERS index a267659..1a142b8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -622,7 +622,7 @@ P: Dirk Opfer M: dirk@opfer-online.de S: Maintained -ARM/PALMTX,PALMT5 SUPPORT +ARM/PALMTX,PALMT5,PALMLD SUPPORT P: Marek Vasut M: marek.vasut@gmail.com W: http://hackndev.com diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 9223ba6..af5b5b4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -349,6 +349,16 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. +config MACH_PALMLD + bool "Palm LifeDrive" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0d0afe8..146aba7 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o obj-$(CONFIG_ARCH_VIPER) += viper.o diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h new file mode 100644 index 0000000..7c295a4 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -0,0 +1,109 @@ +/* + * GPIOs and interrupts for Palm LifeDrive Handheld Computer + * + * Authors: Alex Osborne + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMLD_H_ +#define _INCLUDE_PALMLD_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMLD_GPIO_RESET 1 +#define GPIO_NR_PALMLD_POWER_DETECT 4 +#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMLD_POWER_SWITCH 12 +#define GPIO_NR_PALMLD_EARPHONE_DETECT 13 +#define GPIO_NR_PALMLD_LOCK_SWITCH 15 + +/* SD/MMC */ +#define GPIO_NR_PALMLD_SD_DETECT_N 14 +#define GPIO_NR_PALMLD_SD_POWER 114 +#define GPIO_NR_PALMLD_SD_READONLY 116 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMLD_WM9712_IRQ 27 + +/* IRDA */ +#define GPIO_NR_PALMLD_IR_DISABLE 108 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMLD_BL_POWER 19 +#define GPIO_NR_PALMLD_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMLD_BORDER_SWITCH 21 +#define GPIO_NR_PALMLD_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMLD_BT_POWER 17 +#define GPIO_NR_PALMLD_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMLD_PCMCIA_READY 38 +#define GPIO_NR_PALMLD_PCMCIA_POWER 36 +#define GPIO_NR_PALMLD_PCMCIA_RESET 81 + +/* LEDs */ +#define GPIO_NR_PALMLD_LED_GREEN 52 +#define GPIO_NR_PALMLD_LED_AMBER 94 + +/* IDE */ +#define GPIO_NR_PALMLD_IDE_IRQ 95 +#define GPIO_NR_PALMLD_IDE_RESET 98 +#define GPIO_NR_PALMLD_IDE_PWEN 115 + +/* USB */ +#define GPIO_NR_PALMLD_USB_DETECT_N 3 +#define GPIO_NR_PALMLD_USB_READY 86 +#define GPIO_NR_PALMLD_USB_RESET 88 +#define GPIO_NR_PALMLD_USB_INT 106 +#define GPIO_NR_PALMLD_USB_POWER 118 +/* 20, 53 and 86 are usb related too */ + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) + + +/** HERE ARE INIT VALUES **/ + +/* IO mappings */ +#define PALMLD_USB_PHYS PXA_CS2_PHYS +#define PALMLD_USB_VIRT 0xf0000000 +#define PALMLD_USB_SIZE 0x00100000 + +#define PALMLD_IDE_PHYS 0x20000000 +#define PALMLD_IDE_VIRT 0xf1000000 +#define PALMLD_IDE_SIZE 0x00100000 + +#define PALMLD_PHYS_IO_START 0x40000000 + +/* BATTERY */ +#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ +#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */ + +#define PALMLD_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMLD_MAX_INTENSITY 0xFE +#define PALMLD_DEFAULT_INTENSITY 0x7E +#define PALMLD_LIMIT_MASK 0x7F +#define PALMLD_PRESCALER 0x3F +#define PALMLD_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c new file mode 100644 index 0000000..55a2c40 --- /dev/null +++ b/arch/arm/mach-pxa/palmld.c @@ -0,0 +1,566 @@ +/* + * Hardware definitions for Palm LifeDrive + * + * Author: Marek Vasut + * + * Based on work of: + * Alex Osborne + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmld_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO116_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO108_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* GPIO KEYS */ + GPIO10_GPIO, /* hotsync button */ + GPIO12_GPIO, /* power switch */ + GPIO15_GPIO, /* lock switch */ + + /* LEDs */ + GPIO52_GPIO, /* green led */ + GPIO94_GPIO, /* orange led */ + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO36_GPIO, /* wifi power */ + GPIO38_GPIO, /* wifi ready */ + GPIO81_GPIO, /* wifi reset */ + + /* HDD */ + GPIO95_GPIO, /* HDD irq */ + GPIO115_GPIO, /* HDD power */ + + /* MISC */ + GPIO13_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), + palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMLD_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMLD_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +err: + return err; +} + +static void palmld_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMLD_SD_READONLY); + gpio_free(GPIO_NR_PALMLD_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +} + +static void palmld_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmld_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY); +} + +static struct pxamci_platform_data palmld_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmld_mci_power, + .get_ro = palmld_mci_get_ro, + .init = palmld_mci_init, + .exit = palmld_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmld_matrix_keys[] = { + KEY(0, 1, KEY_F2), + KEY(0, 2, KEY_UP), + + KEY(1, 0, KEY_F3), + KEY(1, 1, KEY_F4), + KEY(1, 2, KEY_RIGHT), + + KEY(2, 0, KEY_F1), + KEY(2, 1, KEY_F5), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_F6), + KEY(3, 1, KEY_ENTER), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmld_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmld_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, + {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" }, + {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" }, +}; + +static struct gpio_keys_platform_data palmld_pxa_keys_data = { + .buttons = palmld_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmld_pxa_buttons), +}; + +static struct platform_device palmld_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmld_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmld_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMLD_BL_POWER); +err: + return ret; +} + +static int palmld_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); + return brightness; +} + +static void palmld_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_BL_POWER); + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmld_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMLD_MAX_INTENSITY, + .dft_brightness = PALMLD_MAX_INTENSITY, + .pwm_period_ns = PALMLD_PERIOD_NS, + .init = palmld_backlight_init, + .notify = palmld_backlight_notify, + .exit = palmld_backlight_exit, +}; + +static struct platform_device palmld_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmld_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmld_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +err: + return err; +} + +static void palmld_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +} + +static void palmld_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmld_ficp_platform_data = { + .startup = palmld_irda_startup, + .shutdown = palmld_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmld_irda_transceiver_mode, +}; + +/****************************************************************************** + * LEDs + ******************************************************************************/ +struct gpio_led gpio_leds[] = { +{ + .name = "palmld:green:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_GREEN, +}, { + .name = "palmld:amber:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_AMBER, +}, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device palmld_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + } +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N); + if (ret) + goto err3; + + return 0; + +err3: + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); +err2: + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +err1: + return ret; +} + +static int palmld_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT); +} + +static int palmld_is_usb_online(void) +{ + return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +} + +static char *palmld_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmld_is_ac_online, + .is_usb_online = palmld_is_usb_online, + .exit = power_supply_exit, + .supplied_to = palmld_supplicants, + .num_supplicants = ARRAY_SIZE(palmld_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMLD_BAT_MAX_VOLTAGE, + .min_voltage = PALMLD_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmld_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmld_lcd_screen = { + .modes = palmld_lcd_modes, + .num_modes = ARRAY_SIZE(palmld_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmld_pxa_keys, +#endif + &palmld_backlight, + &palmld_leds, + &power_supply, +}; + +static struct map_desc palmld_io_desc[] __initdata = { +{ + .virtual = PALMLD_IDE_VIRT, + .pfn = __phys_to_pfn(PALMLD_IDE_PHYS), + .length = PALMLD_IDE_SIZE, + .type = MT_DEVICE +}, +{ + .virtual = PALMLD_USB_VIRT, + .pfn = __phys_to_pfn(PALMLD_USB_PHYS), + .length = PALMLD_USB_SIZE, + .type = MT_DEVICE +}, +}; + +static void __init palmld_map_io(void) +{ + pxa_map_io(); + iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc)); +} + +static void __init palmld_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); + + set_pxa_fb_info(&palmld_lcd_screen); + pxa_set_mci_info(&palmld_mci_platform_data); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmld_ficp_platform_data); + pxa_set_keypad_info(&palmld_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMLD, "Palm LifeDrive") + .phys_io = PALMLD_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = palmld_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmld_init +MACHINE_END -- cgit v0.10.2 From 28c88046d0974e50859d80c885f61d67cb083d02 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 3 Dec 2008 09:38:10 +0200 Subject: [ARM] pxa/em-x270: updates for 2.6.29 The patch includes the following updates to EM-X270: - Added DA9030 support - Added NOR flash support - Added QCI with mt9m112 sensor support - Updated LCD support Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f5ed803..1aaae97 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -16,9 +16,16 @@ #include #include #include +#include #include #include #include +#include +#include +#include +#include + +#include #include #include @@ -31,6 +38,9 @@ #include #include #include +#include +#include +#include #include "generic.h" @@ -44,6 +54,9 @@ #define GPIO11_NAND_CS (11) #define GPIO56_NAND_RB (56) +/* Miscelaneous GPIOs */ +#define GPIO93_CAM_RESET (93) + static unsigned long em_x270_pin_config[] = { /* AC'97 */ GPIO28_AC97_BITCLK, @@ -154,6 +167,7 @@ static unsigned long em_x270_pin_config[] = { /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ + GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ /* NAND controls */ @@ -369,6 +383,61 @@ static void __init em_x270_init_nand(void) static inline void em_x270_init_nand(void) {} #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition em_x270_nor_parts[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Environment", + .offset = 0x00050000, + .size = 0x00010000, + }, { + .name = "Reserved", + .offset = 0x00060000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Splashscreen", + .offset = 0x000b0000, + .size = 0x00050000, + } +}; + +static struct physmap_flash_data em_x270_nor_data[] = { + [0] = { + .width = 2, + .parts = em_x270_nor_parts, + .nr_parts = ARRAY_SIZE(em_x270_nor_parts), + }, +}; + +static struct resource em_x270_nor_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em_x270_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .num_resources = 1, + .resource = &em_x270_nor_flash_resource, + .dev = { + .platform_data = &em_x270_nor_data, + }, +}; + +static void __init em_x270_init_nor(void) +{ + platform_device_register(&em_x270_physmap_flash); +} +#else +static inline void em_x270_init_nor(void) {} +#endif + /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) @@ -442,27 +511,43 @@ static void __init em_x270_init_mmc(void) static inline void em_x270_init_mmc(void) {} #endif -/* LCD 480x640 */ +/* LCD */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -static struct pxafb_mode_info em_x270_lcd_mode = { - .pixclock = 50000, - .bpp = 16, - .xres = 480, - .yres = 640, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 0, - .right_margin = 24, - .lower_margin = 4, - .cmap_greyscale = 0, +static struct pxafb_mode_info em_x270_lcd_modes[] = { + [0] = { + .pixclock = 38250, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 24, + .lower_margin = 4, + .sync = 0, + }, + [1] = { + .pixclock = 153800, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 88, + .lower_margin = 2, + .sync = 0, + }, }; static struct pxafb_mach_info em_x270_lcd = { - .modes = &em_x270_lcd_mode, - .num_modes = 1, + .modes = em_x270_lcd_modes, + .num_modes = 2, .lcd_conn = LCD_COLOR_TFT_16BPP, }; + static void __init em_x270_init_lcd(void) { set_pxa_fb_info(&em_x270_lcd); @@ -471,6 +556,40 @@ static void __init em_x270_init_lcd(void) static inline void em_x270_init_lcd(void) {} #endif +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master em_x270_spi_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { + .rx_threshold = 1, + .tx_threshold = 1, +}; + +static struct tdo24m_platform_data em_x270_tdo24m_pdata = { + .model = TDO35S, +}; + +static struct spi_board_info em_x270_spi_devices[] __initdata = { + { + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, +}; + +static void __init em_x270_init_spi(void) +{ + pxa2xx_set_spi_info(1, &em_x270_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); +} +#else +static inline void em_x270_init_spi(void) {} +#endif + #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) static void __init em_x270_init_ac97(void) { @@ -535,19 +654,241 @@ static void __init em_x270_init_gpio_keys(void) static inline void em_x270_init_gpio_keys(void) {} #endif +/* Quick Capture Interface and sensor setup */ +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static struct regulator *em_x270_camera_ldo; + +static int em_x270_sensor_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); + if (ret) + return ret; + + gpio_direction_output(GPIO93_CAM_RESET, 0); + + em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); + if (em_x270_camera_ldo == NULL) { + gpio_free(GPIO93_CAM_RESET); + return -ENODEV; + } + + ret = regulator_enable(em_x270_camera_ldo); + if (ret) { + regulator_put(em_x270_camera_ldo); + gpio_free(GPIO93_CAM_RESET); + return ret; + } + + gpio_set_value(GPIO93_CAM_RESET, 1); + + return 0; +} + +struct pxacamera_platform_data em_x270_camera_platform_data = { + .init = em_x270_sensor_init, + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +static int em_x270_sensor_power(struct device *dev, int on) +{ + int ret; + int is_on = regulator_is_enabled(em_x270_camera_ldo); + + if (on == is_on) + return 0; + + gpio_set_value(GPIO93_CAM_RESET, !on); + + if (on) + ret = regulator_enable(em_x270_camera_ldo); + else + ret = regulator_disable(em_x270_camera_ldo); + + if (ret) + return ret; + + gpio_set_value(GPIO93_CAM_RESET, on); + + return 0; +} + +static struct soc_camera_link iclink = { + .bus_id = 0, + .power = em_x270_sensor_power, +}; + +static struct i2c_board_info em_x270_i2c_cam_info[] = { + { + I2C_BOARD_INFO("mt9m111", 0x48), + .platform_data = &iclink, + }, +}; + +static struct i2c_pxa_platform_data em_x270_i2c_info = { + .fast_mode = 1, +}; + +static void __init em_x270_init_camera(void) +{ + pxa_set_i2c_info(&em_x270_i2c_info); + i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); + pxa_set_camera_info(&em_x270_camera_platform_data); +} +#else +static inline void em_x270_init_camera(void) {} +#endif + +/* DA9030 related initializations */ +static struct regulator_consumer_supply ldo3_consumers[] = { + { + .dev = NULL, + .supply = "vcc gps", + }, +}; + +static struct regulator_consumer_supply ldo5_consumers[] = { + { + .dev = NULL, + .supply = "vcc cam", + }, +}; + +static struct regulator_consumer_supply ldo12_consumers[] = { + { + .dev = NULL, + .supply = "vcc usb", + }, +}; + +static struct regulator_consumer_supply ldo19_consumers[] = { + { + .dev = NULL, + .supply = "vcc gprs", + }, +}; + +static struct regulator_init_data ldo3_data = { + .constraints = { + .min_uV = 3200000, + .max_uV = 3200000, + .state_mem = { + .enabled = 0, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo3_consumers), + .consumer_supplies = ldo3_consumers, +}; + +static struct regulator_init_data ldo5_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .state_mem = { + .enabled = 0, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers), + .consumer_supplies = ldo5_consumers, +}; + +static struct regulator_init_data ldo12_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .state_mem = { + .enabled = 0, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo12_consumers), + .consumer_supplies = ldo12_consumers, +}; + +static struct regulator_init_data ldo19_data = { + .constraints = { + .min_uV = 3200000, + .max_uV = 3200000, + .state_mem = { + .enabled = 0, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo19_consumers), + .consumer_supplies = ldo19_consumers, +}; + +struct led_info em_x270_led_info = { + .name = "em-x270:orange", + .default_trigger = "battery-charging-or-full", +}; + +struct da903x_subdev_info em_x270_da9030_subdevs[] = { + { + .name = "da903x-regulator", + .id = DA9030_ID_LDO3, + .platform_data = &ldo3_data, + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO5, + .platform_data = &ldo5_data, + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO12, + .platform_data = &ldo12_data, + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO19, + .platform_data = &ldo19_data, + }, { + .name = "da903x-led", + .id = DA9030_ID_LED_PC, + .platform_data = &em_x270_led_info, + }, { + .name = "da903x-backlight", + .id = DA9030_ID_WLED, + } +}; + +static struct da903x_platform_data em_x270_da9030_info = { + .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), + .subdevs = em_x270_da9030_subdevs, +}; + +static struct i2c_board_info em_x270_i2c_pmic_info = { + I2C_BOARD_INFO("da9030", 0x49), + .irq = IRQ_GPIO(0), + .platform_data = &em_x270_da9030_info, +}; + +static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { + .use_pio = 1, +}; + +static void __init em_x270_init_da9030(void) +{ + pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); + i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); +} + static void __init em_x270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + em_x270_init_da9030(); em_x270_init_dm9000(); em_x270_init_rtc(); em_x270_init_nand(); + em_x270_init_nor(); em_x270_init_lcd(); em_x270_init_mmc(); em_x270_init_ohci(); em_x270_init_keypad(); em_x270_init_gpio_keys(); em_x270_init_ac97(); + em_x270_init_camera(); + em_x270_init_spi(); } MACHINE_START(EM_X270, "Compulab EM-X270") -- cgit v0.10.2 From efd0ef4e57ec9ae12d013ce91ccef32589e95080 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 3 Dec 2008 09:38:07 +0200 Subject: [ARM] pxa: update xm_x2xx_defconfig Update xm_x2xx_defconfig to allow use of EM-X270 updated features Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig index f891364..07c3c93 100644 --- a/arch/arm/configs/xm_x2xx_defconfig +++ b/arch/arm/configs/xm_x2xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc8 -# Sun Oct 5 11:05:36 2008 +# Linux kernel version: 2.6.28-rc6 +# Wed Dec 3 09:26:16 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,7 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y @@ -80,7 +79,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -89,15 +90,9 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -129,6 +124,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -169,8 +165,7 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM is not set # # Intel PXA2xx/PXA3xx Implementations @@ -232,6 +227,7 @@ CONFIG_ARM_THUMB=y # CONFIG_OUTER_CACHE is not set CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y # # Bus support @@ -287,14 +283,14 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -327,6 +323,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -389,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -434,11 +433,10 @@ CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -522,7 +520,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_MTD_PXA2XX=y # CONFIG_MTD_ARM_INTEGRATOR is not set @@ -535,6 +533,8 @@ CONFIG_MTD_PXA2XX=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -756,6 +756,7 @@ CONFIG_MII=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=1 # CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -763,6 +764,9 @@ CONFIG_DM9000_DEBUGLEVEL=1 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -775,7 +779,7 @@ CONFIG_NET_PCI=y # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=y +CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set @@ -787,6 +791,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -879,6 +884,7 @@ CONFIG_KEYBOARD_PXA27x=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -1022,13 +1028,32 @@ CONFIG_I2C_PXA=y # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -1043,17 +1068,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1069,6 +1096,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +CONFIG_PMIC_DA903X=y +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -1077,13 +1107,113 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=m +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +CONFIG_VIDEO_PXA27x=m +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1095,6 +1225,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1128,6 +1259,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1144,7 +1276,17 @@ CONFIG_FB_MBX=m # CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_TDO24M=m +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_DA903X=m # # Display device support @@ -1167,6 +1309,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1182,82 +1325,23 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set CONFIG_SND_ARM=y CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y CONFIG_SND_PXA2XX_AC97=m -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set -CONFIG_SND_PCMCIA=y -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set -# CONFIG_SND_SOC is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_EM_X270=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9712=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y @@ -1269,9 +1353,36 @@ CONFIG_HID_DEBUG=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1291,6 +1402,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1306,6 +1419,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -1314,13 +1429,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1355,6 +1471,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1371,13 +1488,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y @@ -1385,11 +1504,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=m # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_SPI is not set # CONFIG_MMC_SDRICOH_CS is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set @@ -1400,9 +1520,9 @@ CONFIG_LEDS_CLASS=y # LED drivers # # CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_CM_X270=y +CONFIG_LEDS_GPIO=m # CONFIG_LEDS_PCA955X is not set +CONFIG_LEDS_DA903X=m # # LED Triggers @@ -1410,6 +1530,7 @@ CONFIG_LEDS_CM_X270=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1441,21 +1562,32 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set CONFIG_RTC_DRV_V3020=y # @@ -1463,14 +1595,12 @@ CONFIG_RTC_DRV_V3020=y # CONFIG_RTC_DRV_SA1100=y # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_DA903X=m # CONFIG_UIO is not set # @@ -1483,12 +1613,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1520,6 +1651,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1567,6 +1699,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1681,16 +1814,24 @@ CONFIG_DEBUG_KERNEL=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1705,12 +1846,14 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1783,14 +1926,17 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -- cgit v0.10.2 From b25a386b9c68ed23c3b2656f44b523e61480218b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:01:04 +0100 Subject: [ARM] pxa/magician: Update defconfig This is the touched up result of make magician_defconfig in 2.6.29-rc2. - Enabled USB host and bluetooth: magician has a CSR BlueCore3 connected to the PXA27x OHCI internally. - Made I2C built-in. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 4d11678..7adb098 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Sun Dec 30 13:02:54 2007 +# Linux kernel version: 2.6.29-rc2 +# Sat Jan 17 17:47:17 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,16 +42,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -65,31 +65,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -104,7 +114,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y # # System Type @@ -114,9 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -130,41 +142,57 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set # CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set CONFIG_MACH_MAGICIAN=y +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA27x=y - -# -# Boot options -# - -# -# Power management -# +# CONFIG_PXA_PWM is not set +CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type @@ -173,6 +201,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -186,6 +215,7 @@ CONFIG_ARM_THUMB=y # CONFIG_OUTER_CACHE is not set CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -197,28 +227,33 @@ CONFIG_XSCALE_PMU=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -229,9 +264,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="keepinitrd" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y # -# CPU Frequency scaling +# CPU Power Management # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y @@ -239,6 +275,7 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set @@ -247,6 +284,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -263,6 +301,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -270,21 +310,18 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -316,33 +353,15 @@ CONFIG_IP_PNP=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -353,6 +372,7 @@ CONFIG_NETFILTER=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -390,20 +410,17 @@ CONFIG_IRTTY_SIR=m # Dongle support # # CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set # # FIR device drivers # +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -417,17 +434,17 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,25 +459,28 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -473,6 +493,7 @@ CONFIG_MTD_BLOCK=m # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y @@ -487,6 +508,7 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -497,9 +519,7 @@ CONFIG_MTD_CFI_INTELEXT=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x04000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PXA2XX is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_SHARP_SL is not set @@ -523,6 +543,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -531,10 +557,12 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -547,7 +575,6 @@ CONFIG_BLK_DEV=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -563,6 +590,20 @@ CONFIG_NETDEVICES=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -612,7 +653,26 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -625,9 +685,11 @@ CONFIG_INPUT_UINPUT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -642,6 +704,7 @@ CONFIG_SERIAL_PXA=y # CONFIG_SERIAL_PXA_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -649,37 +712,45 @@ CONFIG_UNIX98_PTYS=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -CONFIG_I2C=m +CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -688,19 +759,39 @@ CONFIG_I2C_PXA=m # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set CONFIG_W1=y # # 1-wire Bus Masters # +# CONFIG_W1_MASTER_DS2490 is not set # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_DS1WM=y +# CONFIG_W1_MASTER_GPIO is not set # # 1-wire Slaves @@ -709,32 +800,56 @@ CONFIG_W1_MASTER_DS1WM=y # CONFIG_W1_SLAVE_SMEM is not set # CONFIG_W1_SLAVE_DS2433 is not set CONFIG_W1_SLAVE_DS2760=y +# CONFIG_W1_SLAVE_BQ27000 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_PDA_POWER=y -# CONFIG_APM_POWER is not set CONFIG_BATTERY_DS2760=y +# CONFIG_BATTERY_BQ27x00 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -745,6 +860,7 @@ CONFIG_HTC_PASIC3=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -752,8 +868,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -765,13 +881,20 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_BACKLIGHT_GENERIC is not set # # Display device support @@ -802,15 +925,8 @@ CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -824,53 +940,151 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_PXA2XX_LIB=m +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_HID=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# ALSA ARM devices +# Miscellaneous USB options # -# CONFIG_SND_PXA2XX_AC97 is not set +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# System on Chip audio support +# USB Host Controller Drivers # -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # -# SoC Audio support for SuperH +# USB Device Class drivers # +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# Open Sound System +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # -# CONFIG_SOUND_PRIME is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_HID=m -# CONFIG_USB_SUPPORT is not set + +# +# see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -899,6 +1113,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -908,17 +1125,26 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -927,19 +1153,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -965,15 +1190,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -997,9 +1220,13 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1007,14 +1234,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1076,6 +1302,7 @@ CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1083,15 +1310,18 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set @@ -1100,17 +1330,41 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1119,55 +1373,110 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v0.10.2 From 73921ea5b5ccfe0bbe4c1dfcd1a60fdadc7c7d1e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:45:40 +0100 Subject: [ARM] pxa/magician: Enable backlight Magician uses the generic PWM backlight driver, so select HAVE_PWM. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 7adb098..dde50df 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -4,6 +4,7 @@ # Sat Jan 17 17:47:17 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y @@ -191,7 +192,7 @@ CONFIG_MACH_MAGICIAN=y # CONFIG_ARCH_PXA_PALM is not set # CONFIG_PXA_EZX is not set CONFIG_PXA27x=y -# CONFIG_PXA_PWM is not set +CONFIG_PXA_PWM=y CONFIG_PXA_HAVE_BOARD_IRQS=y # @@ -895,6 +896,7 @@ CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y # # Display device support diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index af5b5b4..a2ed2aa 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -295,6 +295,7 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT + select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 -- cgit v0.10.2 From 16c3ea43b8e7b3bf4332f5570263f409e4ca4557 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:45:41 +0100 Subject: [ARM] pxa/magician: setup SSP1 pins for audio Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 21b821e..4416ee1 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -66,6 +66,11 @@ static unsigned long magician_pin_config[] __initdata = { GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, + /* SSP 1 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + /* SSP 2 */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, -- cgit v0.10.2 From dee63169884a528000d6318b1c1c2d0b445953f9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:45:42 +0100 Subject: [ARM] pxa/magician: enable power I2C for max158xx Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 4416ee1..f734d66 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -748,6 +748,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); pxa_set_ficp_info(&magician_ficp_info); } + pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); -- cgit v0.10.2 From fcb78d1f615a46509bffd9347b7f36fab4db79df Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:45:43 +0100 Subject: [ARM] pxa/magician: Use SZ_64M for physmap resource Improves readability over the custom #define. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index f734d66..b952508 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -693,11 +693,9 @@ static void magician_set_vpp(struct map_info *map, int vpp) gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } -#define PXA_CS_SIZE 0x04000000 - static struct resource strataflash_resource = { .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1, + .end = PXA_CS0_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }; -- cgit v0.10.2 From 51c10bbc3d7d700acd25a004d58a51067983acb6 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 17 Jan 2009 18:45:44 +0100 Subject: [ARM] pxa/magician: use named initializers for gpio_keys setup Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index b952508..b7aafe6 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -153,22 +153,31 @@ static struct pxaficp_platform_data magician_ficp_info = { * GPIO Keys */ +#define INIT_KEY(_code, _gpio, _desc) \ + { \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ + } + static struct gpio_keys_button magician_button_table[] = { - {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"}, - {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"}, - {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"}, - {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"}, - {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"}, - {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"}, - {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"}, - {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"}, - {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"}, - {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"}, - {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"}, - {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"}, - {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"}, - {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"}, - {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"}, + INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"), + INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"), + INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"), + INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"), + INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"), + INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"), + INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"), + INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"), + INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"), + INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"), + INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"), + INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"), + INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"), + INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"), + INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"), }; static struct gpio_keys_platform_data gpio_keys_data = { -- cgit v0.10.2 From 6489c611db095356645ca1a2689e93c63caeb310 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 1 Feb 2009 11:20:30 +0100 Subject: [ARM] pxa/magician: Enable pxa27x_udc and gpio_vbus This patch depends on otg_transceiver support in pxa27x_udc (which is queued via linux-usb) to work. It compiles also without it. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index dde50df..4154d61 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Sat Jan 17 17:47:17 2009 +# Linux kernel version: 2.6.29-rc3 +# Fri Jan 30 12:42:03 2009 # CONFIG_ARM=y CONFIG_HAVE_PWM=y @@ -44,6 +44,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 @@ -114,11 +123,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_FREEZER=y # @@ -993,6 +997,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers @@ -1044,12 +1049,45 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m # # OTG and related infrastructure # -# CONFIG_USB_GPIO_VBUS is not set +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 38d68d9..82a399f 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -69,7 +69,7 @@ #define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) #define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) +#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) /* * CPLD EGPIOs diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index b7aafe6..af46487 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -525,6 +526,31 @@ static struct platform_device pasic3 = { }; /* + * USB "Transceiver" + */ + +static struct resource gpio_vbus_resource = { + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, +}; + +static struct gpio_vbus_mach_info gpio_vbus_info = { + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, +}; + +static struct platform_device gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, + .dev = { + .platform_data = &gpio_vbus_info, + }, +}; + +/* * External power */ @@ -601,14 +627,14 @@ static struct resource power_supply_resources[] = { [0] = { .name = "ac", .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { .name = "usb", .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; @@ -732,6 +758,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &gpio_vbus, &power_supply, &strataflash, &leds_gpio, -- cgit v0.10.2 From 6432f46c4ffd0a85cab5313bc989a6db32bc0eb4 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:51 +0200 Subject: [ARM] pxa/em-x270: update MMC/SDIO implementation Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 1aaae97..05f9e9e 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -43,12 +43,12 @@ #include #include "generic.h" +#include "devices.h" /* GPIO IRQ usage */ #define GPIO41_ETHIRQ (41) #define GPIO13_MMC_CD (13) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) -#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD) /* NAND control GPIOs */ #define GPIO11_NAND_CS (11) @@ -56,6 +56,7 @@ /* Miscelaneous GPIOs */ #define GPIO93_CAM_RESET (93) +#define GPIO95_MMC_WP (95) static unsigned long em_x270_pin_config[] = { /* AC'97 */ @@ -163,7 +164,8 @@ static unsigned long em_x270_pin_config[] = { GPIO18_RDY, /* GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ + GPIO95_GPIO, /* MMC Write protect */ /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ @@ -464,47 +466,86 @@ static inline void em_x270_init_ohci(void) {} /* MCI controller setup */ #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) +static struct regulator *em_x270_sdio_ldo; + static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { - int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + int err; + + em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); + if (IS_ERR(em_x270_sdio_ldo)) { + dev_err(dev, "can't request SDIO power supply: %ld\n", + PTR_ERR(em_x270_sdio_ldo)); + return PTR_ERR(em_x270_sdio_ldo); + } + + err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "MMC card detect", data); if (err) { - printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", - __func__, err); - return err; + dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); + goto err_irq; + } + + err = gpio_request(GPIO95_MMC_WP, "MMC WP"); + if (err) { + dev_err(dev, "can't request MMC write protect: %d\n", err); + goto err_gpio_wp; } + gpio_direction_input(GPIO95_MMC_WP); + return 0; + +err_gpio_wp: + free_irq(gpio_to_irq(GPIO13_MMC_CD), data); +err_irq: + regulator_put(em_x270_sdio_ldo); + + return err; } static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) { - /* - FIXME: current hardware implementation does not allow to - enable/disable MMC power. This will be fixed in next HW releases, - and we'll need to add implmentation here. - */ - return; + struct pxamci_platform_data* p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) { + int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; + + regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); + regulator_enable(em_x270_sdio_ldo); + } else { + regulator_disable(em_x270_sdio_ldo); + } } static void em_x270_mci_exit(struct device *dev, void *data) { - int irq = gpio_to_irq(GPIO13_MMC_CD); - free_irq(irq, data); + free_irq(gpio_to_irq(GPIO13_MMC_CD), data); +} + +static int em_x270_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO95_MMC_WP); } static struct pxamci_platform_data em_x270_mci_platform_data = { - .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, + .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| + MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| + MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| + MMC_VDD_30_31|MMC_VDD_31_32, .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, + .get_ro = em_x270_mci_get_ro, .exit = em_x270_mci_exit, }; static void __init em_x270_init_mmc(void) { + em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else @@ -757,6 +798,13 @@ static struct regulator_consumer_supply ldo5_consumers[] = { }, }; +static struct regulator_consumer_supply ldo10_consumers[] = { + { + .dev = &pxa_device_mci.dev, + .supply = "vcc sdio", + }, +}; + static struct regulator_consumer_supply ldo12_consumers[] = { { .dev = NULL, @@ -795,6 +843,19 @@ static struct regulator_init_data ldo5_data = { .consumer_supplies = ldo5_consumers, }; +static struct regulator_init_data ldo10_data = { + .constraints = { + .min_uV = 2000000, + .max_uV = 3200000, + .state_mem = { + .enabled = 0, + }, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo10_consumers), + .consumer_supplies = ldo10_consumers, +}; + static struct regulator_init_data ldo12_data = { .constraints = { .min_uV = 3000000, @@ -835,6 +896,10 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = { .platform_data = &ldo5_data, }, { .name = "da903x-regulator", + .id = DA9030_ID_LDO10, + .platform_data = &ldo10_data, + }, { + .name = "da903x-regulator", .id = DA9030_ID_LDO12, .platform_data = &ldo12_data, }, { -- cgit v0.10.2 From 432adf1898381bac5a9ef90262d8a91e16823b11 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:52 +0200 Subject: [ARM] pxa/em-x270: introduce macors to to simplify da9030 subdev initialization Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 05f9e9e..7d056cb 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -784,136 +784,64 @@ static inline void em_x270_init_camera(void) {} #endif /* DA9030 related initializations */ -static struct regulator_consumer_supply ldo3_consumers[] = { - { - .dev = NULL, - .supply = "vcc gps", - }, -}; - -static struct regulator_consumer_supply ldo5_consumers[] = { - { - .dev = NULL, - .supply = "vcc cam", - }, -}; - -static struct regulator_consumer_supply ldo10_consumers[] = { - { - .dev = &pxa_device_mci.dev, - .supply = "vcc sdio", - }, -}; - -static struct regulator_consumer_supply ldo12_consumers[] = { - { - .dev = NULL, - .supply = "vcc usb", - }, -}; - -static struct regulator_consumer_supply ldo19_consumers[] = { - { - .dev = NULL, - .supply = "vcc gprs", - }, -}; - -static struct regulator_init_data ldo3_data = { - .constraints = { - .min_uV = 3200000, - .max_uV = 3200000, - .state_mem = { - .enabled = 0, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo3_consumers), - .consumer_supplies = ldo3_consumers, -}; - -static struct regulator_init_data ldo5_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .state_mem = { - .enabled = 0, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers), - .consumer_supplies = ldo5_consumers, -}; - -static struct regulator_init_data ldo10_data = { - .constraints = { - .min_uV = 2000000, - .max_uV = 3200000, - .state_mem = { - .enabled = 0, - }, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo10_consumers), - .consumer_supplies = ldo10_consumers, -}; - -static struct regulator_init_data ldo12_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .state_mem = { - .enabled = 0, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo12_consumers), - .consumer_supplies = ldo12_consumers, -}; +#define REGULATOR_CONSUMER(_name, _dev, _supply) \ + static struct regulator_consumer_supply _name##_consumers[] = { \ + { \ + .dev = _dev, \ + .supply = _supply, \ + }, \ + } -static struct regulator_init_data ldo19_data = { - .constraints = { - .min_uV = 3200000, - .max_uV = 3200000, - .state_mem = { - .enabled = 0, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo19_consumers), - .consumer_supplies = ldo19_consumers, -}; +REGULATOR_CONSUMER(ldo3, NULL, "vcc gps"); +REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); +REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); +REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); +REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); + +#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ + static struct regulator_init_data _ldo##_data = { \ + .constraints = { \ + .min_uV = _min_uV, \ + .max_uV = _max_uV, \ + .state_mem = { \ + .enabled = 0, \ + }, \ + .valid_ops_mask = _ops_mask, \ + }, \ + .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ + .consumer_supplies = _ldo##_consumers, \ + }; + +REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo10, 2000000, 3200000, + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); +REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); struct led_info em_x270_led_info = { .name = "em-x270:orange", .default_trigger = "battery-charging-or-full", }; -struct da903x_subdev_info em_x270_da9030_subdevs[] = { - { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &ldo3_data, - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &ldo5_data, - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &ldo10_data, - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &ldo12_data, - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &ldo19_data, - }, { - .name = "da903x-led", - .id = DA9030_ID_LED_PC, - .platform_data = &em_x270_led_info, - }, { - .name = "da903x-backlight", - .id = DA9030_ID_WLED, +#define DA9030_SUBDEV(_name, _id, _pdata) \ + { \ + .name = "da903x-" #_name, \ + .id = DA9030_ID_##_id, \ + .platform_data = _pdata, \ } + +#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) + +struct da903x_subdev_info em_x270_da9030_subdevs[] = { + DA9030_LDO(3), + DA9030_LDO(5), + DA9030_LDO(10), + DA9030_LDO(12), + DA9030_LDO(19), + + DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), + DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), }; static struct da903x_platform_data em_x270_da9030_info = { -- cgit v0.10.2 From 9f055c49c6a1afe6e8b75a2622ac29f3a4290b9d Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:53 +0200 Subject: [ARM] pxa/em-x270: add battery charger Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 7d056cb..20ed10c 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include @@ -824,6 +826,49 @@ struct led_info em_x270_led_info = { .default_trigger = "battery-charging-or-full", }; +struct power_supply_info em_x270_psy_info = { + .name = "LP555597P6H-FPS", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void em_x270_battery_low(void) +{ + apm_queue_event(APM_LOW_BATTERY); +} + +static void em_x270_battery_critical(void) +{ + apm_queue_event(APM_CRITICAL_SUSPEND); +} + +struct da9030_battery_info em_x270_batterty_info = { + .battery_info = &em_x270_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = em_x270_battery_low, + .battery_critical = em_x270_battery_critical, +}; + #define DA9030_SUBDEV(_name, _id, _pdata) \ { \ .name = "da903x-" #_name, \ @@ -842,6 +887,7 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = { DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), + DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), }; static struct da903x_platform_data em_x270_da9030_info = { -- cgit v0.10.2 From 4a697e83cf8b20b35942c93b873fe17e54d7e6c5 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:54 +0200 Subject: [ARM] pxa/em-x270: prepare addition of eXeda machine to em-x270.c Change several GPIO assignment from static to run-time Split MFP table to common and EM-X270 specific parts Introduce em_x270_module_init Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 20ed10c..ea09918 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -60,7 +60,11 @@ #define GPIO93_CAM_RESET (93) #define GPIO95_MMC_WP (95) -static unsigned long em_x270_pin_config[] = { +static int mmc_cd; +static int nand_rb; +static int dm9000_flags; + +static unsigned long common_pin_config[] = { /* AC'97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, @@ -167,7 +171,6 @@ static unsigned long em_x270_pin_config[] = { /* GPIO */ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ - GPIO95_GPIO, /* MMC Write protect */ /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ @@ -176,13 +179,17 @@ static unsigned long em_x270_pin_config[] = { /* NAND controls */ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO56_GPIO, /* NAND Ready/Busy */ /* interrupts */ - GPIO13_GPIO, /* MMC card detect */ GPIO41_GPIO, /* DM9000 interrupt */ }; +static unsigned long em_x270_pin_config[] = { + GPIO13_GPIO, /* MMC card detect */ + GPIO56_GPIO, /* NAND Ready/Busy */ + GPIO95_GPIO, /* MMC Write protect */ +}; + #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource em_x270_dm9000_resource[] = { [0] = { @@ -203,7 +210,7 @@ static struct resource em_x270_dm9000_resource[] = { }; static struct dm9000_plat_data em_x270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, + .flags = DM9000_PLATF_NO_EEPROM, }; static struct platform_device em_x270_dm9000 = { @@ -218,6 +225,7 @@ static struct platform_device em_x270_dm9000 = { static void __init em_x270_init_dm9000(void) { + em_x270_dm9000_platdata.flags |= dm9000_flags; platform_device_register(&em_x270_dm9000); } #else @@ -307,7 +315,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); - return gpio_get_value(GPIO56_NAND_RB); + return gpio_get_value(nand_rb); } static struct mtd_partition em_x270_partition_info[] = { @@ -372,14 +380,14 @@ static void __init em_x270_init_nand(void) gpio_direction_output(GPIO11_NAND_CS, 1); - err = gpio_request(GPIO56_NAND_RB, "NAND R/B"); + err = gpio_request(nand_rb, "NAND R/B"); if (err) { pr_warning("EM-X270: failed to request NAND R/B gpio\n"); gpio_free(GPIO11_NAND_CS); return; } - gpio_direction_input(GPIO56_NAND_RB); + gpio_direction_input(nand_rb); platform_device_register(&em_x270_nand); } @@ -483,7 +491,7 @@ static int em_x270_mci_init(struct device *dev, return PTR_ERR(em_x270_sdio_ldo); } - err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int, + err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); @@ -503,7 +511,7 @@ static int em_x270_mci_init(struct device *dev, return 0; err_gpio_wp: - free_irq(gpio_to_irq(GPIO13_MMC_CD), data); + free_irq(gpio_to_irq(mmc_cd), data); err_irq: regulator_put(em_x270_sdio_ldo); @@ -526,7 +534,7 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) static void em_x270_mci_exit(struct device *dev, void *data) { - free_irq(gpio_to_irq(GPIO13_MMC_CD), data); + free_irq(gpio_to_irq(mmc_cd), data); } static int em_x270_mci_get_ro(struct device *dev) @@ -911,10 +919,21 @@ static void __init em_x270_init_da9030(void) i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); } -static void __init em_x270_init(void) +static void __init em_x270_module_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + mmc_cd = GPIO13_MMC_CD; + nand_rb = GPIO56_NAND_RB; + dm9000_flags = DM9000_PLATF_32BITONLY; +} + +static void __init em_x270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); + + em_x270_module_init(); + em_x270_init_da9030(); em_x270_init_dm9000(); em_x270_init_rtc(); -- cgit v0.10.2 From 7f14a78713e0b4517f785402accaccca22df93c1 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:55 +0200 Subject: [ARM] pxa: add eXeda platform support Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a2ed2aa..ffd28e4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -254,6 +254,10 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_EXEDA + bool "CompuLab eXeda platform" + select PXA27x + config MACH_COLIBRI bool "Toradex Colibri PX27x" select PXA27x diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index ea09918..9f15a7c 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -11,6 +11,7 @@ #include #include +#include #include #include @@ -47,18 +48,21 @@ #include "generic.h" #include "devices.h" -/* GPIO IRQ usage */ -#define GPIO41_ETHIRQ (41) +/* EM-X270 specific GPIOs */ #define GPIO13_MMC_CD (13) -#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define GPIO95_MMC_WP (95) +#define GPIO56_NAND_RB (56) -/* NAND control GPIOs */ -#define GPIO11_NAND_CS (11) -#define GPIO56_NAND_RB (56) +/* eXeda specific GPIOs */ +#define GPIO114_MMC_CD (114) +#define GPIO20_NAND_RB (20) +#define GPIO38_SD_PWEN (38) -/* Miscelaneous GPIOs */ +/* common GPIOs */ +#define GPIO11_NAND_CS (11) #define GPIO93_CAM_RESET (93) -#define GPIO95_MMC_WP (95) +#define GPIO41_ETHIRQ (41) +#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) static int mmc_cd; static int nand_rb; @@ -190,6 +194,12 @@ static unsigned long em_x270_pin_config[] = { GPIO95_GPIO, /* MMC Write protect */ }; +static unsigned long exeda_pin_config[] = { + GPIO20_GPIO, /* NAND Ready/Busy */ + GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ + GPIO114_GPIO, /* MMC card detect */ +}; + #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource em_x270_dm9000_resource[] = { [0] = { @@ -500,14 +510,24 @@ static int em_x270_mci_init(struct device *dev, goto err_irq; } - err = gpio_request(GPIO95_MMC_WP, "MMC WP"); - if (err) { - dev_err(dev, "can't request MMC write protect: %d\n", err); - goto err_gpio_wp; + if (machine_is_em_x270()) { + err = gpio_request(GPIO95_MMC_WP, "MMC WP"); + if (err) { + dev_err(dev, "can't request MMC write protect: %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_input(GPIO95_MMC_WP); + } else { + err = gpio_request(GPIO38_SD_PWEN, "sdio power"); + if (err) { + dev_err(dev, "can't request MMC power control : %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_output(GPIO38_SD_PWEN, 1); } - gpio_direction_input(GPIO95_MMC_WP); - return 0; err_gpio_wp: @@ -535,6 +555,12 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) static void em_x270_mci_exit(struct device *dev, void *data) { free_irq(gpio_to_irq(mmc_cd), data); + regulator_put(em_x270_sdio_ldo); + + if (machine_is_em_x270()) + gpio_free(GPIO95_MMC_WP); + else + gpio_free(GPIO38_SD_PWEN); } static int em_x270_mci_get_ro(struct device *dev) @@ -549,12 +575,14 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { MMC_VDD_30_31|MMC_VDD_31_32, .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, - .get_ro = em_x270_mci_get_ro, .exit = em_x270_mci_exit, }; static void __init em_x270_init_mmc(void) { + if (machine_is_em_x270()) + em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; + em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } @@ -651,23 +679,76 @@ static inline void em_x270_init_ac97(void) {} #endif #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static unsigned int em_x270_matrix_keys[] = { +static unsigned int em_x270_module_matrix_keys[] = { KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), }; -struct pxa27x_keypad_platform_data em_x270_keypad_info = { +struct pxa27x_keypad_platform_data em_x270_module_keypad_info = { /* code map for the matrix keys */ .matrix_key_rows = 3, .matrix_key_cols = 3, - .matrix_key_map = em_x270_matrix_keys, - .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), + .matrix_key_map = em_x270_module_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys), +}; + +static unsigned int em_x270_exeda_matrix_keys[] = { + KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL), + KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE), + KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL), + KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH), + + KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M), + KEY(1, 2, KEY_N), KEY(1, 3, KEY_B), + KEY(1, 4, KEY_V), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z), + + KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON), + KEY(2, 2, KEY_L), KEY(2, 3, KEY_K), + KEY(2, 4, KEY_J), KEY(2, 5, KEY_H), + KEY(2, 6, KEY_G), KEY(2, 7, KEY_F), + + KEY(3, 0, KEY_D), KEY(3, 1, KEY_S), + KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB), + KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P), + KEY(3, 6, KEY_O), KEY(3, 7, KEY_I), + + KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_T), KEY(4, 3, KEY_R), + KEY(4, 4, KEY_E), KEY(4, 5, KEY_W), + KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS), + + KEY(5, 0, KEY_0), KEY(5, 1, KEY_9), + KEY(5, 2, KEY_8), KEY(5, 3, KEY_7), + KEY(5, 4, KEY_6), KEY(5, 5, KEY_5), + KEY(5, 6, KEY_4), KEY(5, 7, KEY_3), + + KEY(6, 0, KEY_2), KEY(6, 1, KEY_1), + KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END), + KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP), + KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1), + + KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT), + KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME), + KEY(7, 4, 0), KEY(7, 5, 0), + KEY(7, 6, 0), KEY(7, 7, 0), +}; + +struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = { + /* code map for the matrix keys */ + .matrix_key_rows = 8, + .matrix_key_cols = 8, + .matrix_key_map = em_x270_exeda_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys), }; static void __init em_x270_init_keypad(void) { - pxa_set_keypad_info(&em_x270_keypad_info); + if (machine_is_em_x270()) + pxa_set_keypad_info(&em_x270_module_keypad_info); + else + pxa_set_keypad_info(&em_x270_exeda_keypad_info); } #else static inline void em_x270_init_keypad(void) {} @@ -921,6 +1002,7 @@ static void __init em_x270_init_da9030(void) static void __init em_x270_module_init(void) { + pr_info("%s\n", __func__); pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); mmc_cd = GPIO13_MMC_CD; @@ -928,11 +1010,26 @@ static void __init em_x270_module_init(void) dm9000_flags = DM9000_PLATF_32BITONLY; } +static void __init em_x270_exeda_init(void) +{ + pr_info("%s\n", __func__); + pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); + + mmc_cd = GPIO114_MMC_CD; + nand_rb = GPIO20_NAND_RB; + dm9000_flags = DM9000_PLATF_16BITONLY; +} + static void __init em_x270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); - em_x270_module_init(); + if (machine_is_em_x270()) + em_x270_module_init(); + else if (machine_is_exeda()) + em_x270_exeda_init(); + else + panic("Unsupported machine: %d\n", machine_arch_type); em_x270_init_da9030(); em_x270_init_dm9000(); @@ -958,3 +1055,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END + +MACHINE_START(EXEDA, "Compulab eXeda") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = em_x270_init, +MACHINE_END -- cgit v0.10.2 From 6e39759d456e502f91c6a7ff669f28d6e50437f1 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:57 +0200 Subject: [ARM] pxa: prepare xm_x2xx_defconfig for split xm_x2xx_defconfig currently supports 3 platforms: CM-X255, CM-X270 and EM-X270. Although EM-X270 is similar to CM-X2XX, it has a lot of unique features. Keeping these features in the same _defconfig increases the kernel size in the way it does not fit into CM-X2XX NOR flash. Rename xm_x2xx_defconfig to cm_x2xx_defconfig and remove EM-X270 specifc parts from it. Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig new file mode 100644 index 0000000..797b790 --- /dev/null +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -0,0 +1,1962 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc2 +# Sun Feb 1 16:31:36 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +CONFIG_MACH_ARMCORE=y +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set +CONFIG_PXA25x=y +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_PWM is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_HOST_ITE8152=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +CONFIG_YENTA_TI=y +# CONFIG_YENTA_ENE_TUNE is not set +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCMCIA_PXA2XX=m +CONFIG_PCCARD_NONSTATIC=m + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=m +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_GPIO=m +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_CM_X270=y +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=1 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +# CONFIG_LIBERTAS_CS is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=m +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +CONFIG_UCB1400_CORE=m +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=m +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_PXA27x=m +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y +CONFIG_SND_PXA2XX_AC97=m +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_UWB is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MMC_SDRICOH_CS is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=0 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig deleted file mode 100644 index 07c3c93..0000000 --- a/arch/arm/configs/xm_x2xx_defconfig +++ /dev/null @@ -1,1952 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Wed Dec 3 09:26:16 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_PCI_QUIRKS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -CONFIG_FREEZER=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_GUMSTIX is not set -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_MACH_MP900C is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_ARCH_VIPER is not set -# CONFIG_ARCH_PXA_ESERIES is not set -# CONFIG_TRIZEPS_PXA is not set -CONFIG_MACH_EM_X270=y -# CONFIG_MACH_COLIBRI is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_LITTLETON is not set -# CONFIG_MACH_TAVOREVB is not set -# CONFIG_MACH_SAAR is not set -CONFIG_MACH_ARMCORE=y -# CONFIG_MACH_CM_X300 is not set -# CONFIG_MACH_MAGICIAN is not set -# CONFIG_MACH_MIOA701 is not set -# CONFIG_MACH_PCM027 is not set -# CONFIG_ARCH_PXA_PALM is not set -# CONFIG_PXA_EZX is not set -CONFIG_PXA25x=y -CONFIG_PXA27x=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_PWM is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_DMABOUNCE=y - -# -# Bus support -# -CONFIG_PCI=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCI_HOST_ITE8152=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCI_LEGACY=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -CONFIG_YENTA_TI=y -# CONFIG_YENTA_ENE_TUNE is not set -# CONFIG_YENTA_TOSHIBA is not set -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -CONFIG_PCMCIA_PXA2XX=m -CONFIG_PCCARD_NONSTATIC=m - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PREEMPT is not set -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Power Management -# -# CONFIG_CPU_FREQ is not set -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_APM_EMULATION=m -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -# CONFIG_BT_RFCOMM_TTY is not set -CONFIG_BT_BNEP=m -# CONFIG_BT_BNEP_MC_FILTER is not set -# CONFIG_BT_BNEP_PROTO_FILTER is not set -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIBTUSB is not set -# CONFIG_BT_HCIBTSDIO is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIDTL1 is not set -# CONFIG_BT_HCIBT3C is not set -# CONFIG_BT_HCIBLUECARD is not set -# CONFIG_BT_HCIBTUART is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PXA2XX=y -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_IMPA7 is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_CAFE is not set -CONFIG_MTD_NAND_CM_X270=y -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=m -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_PMP is not set -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_SIL24 is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -CONFIG_PATA_PCMCIA=m -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set -# CONFIG_ENC28J60 is not set -# CONFIG_SMC911X is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -# CONFIG_ATL2 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_LIBERTAS=m -# CONFIG_LIBERTAS_USB is not set -# CONFIG_LIBERTAS_CS is not set -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_HOSTAP is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_NET_PCMCIA is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_APMPOWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_PXA27x=m -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -CONFIG_TOUCHSCREEN_WM97XX=m -# CONFIG_TOUCHSCREEN_WM9705 is not set -CONFIG_TOUCHSCREEN_WM9712=y -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_IPWIRELESS is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set -CONFIG_SPI_PXA2XX=m - -# -# SPI Protocol Masters -# -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set - -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -CONFIG_PMIC_DA903X=y -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -# CONFIG_VIDEO_ALLOW_V4L1 is not set -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_CUSTOMIZE=y -# CONFIG_MEDIA_TUNER_SIMPLE is not set -# CONFIG_MEDIA_TUNER_TDA8290 is not set -# CONFIG_MEDIA_TUNER_TDA827X is not set -# CONFIG_MEDIA_TUNER_TDA18271 is not set -# CONFIG_MEDIA_TUNER_TDA9887 is not set -# CONFIG_MEDIA_TUNER_TEA5761 is not set -# CONFIG_MEDIA_TUNER_TEA5767 is not set -# CONFIG_MEDIA_TUNER_MT20XX is not set -# CONFIG_MEDIA_TUNER_MT2060 is not set -# CONFIG_MEDIA_TUNER_MT2266 is not set -# CONFIG_MEDIA_TUNER_MT2131 is not set -# CONFIG_MEDIA_TUNER_QT1010 is not set -# CONFIG_MEDIA_TUNER_XC2028 is not set -# CONFIG_MEDIA_TUNER_XC5000 is not set -# CONFIG_MEDIA_TUNER_MXL5005S is not set -# CONFIG_MEDIA_TUNER_MXL5007T is not set -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set - -# -# Encoders/decoders and other helper chips -# - -# -# Audio decoders -# -# CONFIG_VIDEO_TVAUDIO is not set -# CONFIG_VIDEO_TDA7432 is not set -# CONFIG_VIDEO_TDA9840 is not set -# CONFIG_VIDEO_TDA9875 is not set -# CONFIG_VIDEO_TEA6415C is not set -# CONFIG_VIDEO_TEA6420 is not set -# CONFIG_VIDEO_MSP3400 is not set -# CONFIG_VIDEO_CS5345 is not set -# CONFIG_VIDEO_CS53L32A is not set -# CONFIG_VIDEO_M52790 is not set -# CONFIG_VIDEO_TLV320AIC23B is not set -# CONFIG_VIDEO_WM8775 is not set -# CONFIG_VIDEO_WM8739 is not set -# CONFIG_VIDEO_VP27SMPX is not set - -# -# Video decoders -# -# CONFIG_VIDEO_OV7670 is not set -# CONFIG_VIDEO_TCM825X is not set -# CONFIG_VIDEO_SAA711X is not set -# CONFIG_VIDEO_SAA717X is not set -# CONFIG_VIDEO_TVP5150 is not set - -# -# Video and audio decoders -# -# CONFIG_VIDEO_CX25840 is not set - -# -# MPEG video encoders -# -# CONFIG_VIDEO_CX2341X is not set - -# -# Video encoders -# -# CONFIG_VIDEO_SAA7127 is not set - -# -# Video improvement chips -# -# CONFIG_VIDEO_UPD64031A is not set -# CONFIG_VIDEO_UPD64083 is not set -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_IVTV is not set -# CONFIG_VIDEO_CAFE_CCIC is not set -CONFIG_SOC_CAMERA=m -# CONFIG_SOC_CAMERA_MT9M001 is not set -CONFIG_SOC_CAMERA_MT9M111=m -# CONFIG_SOC_CAMERA_MT9V022 is not set -# CONFIG_SOC_CAMERA_PLATFORM is not set -CONFIG_VIDEO_PXA27x=m -# CONFIG_VIDEO_SH_MOBILE_CEU is not set -# CONFIG_V4L_USB_DRIVERS is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -CONFIG_FB_PXA=y -# CONFIG_FB_PXA_SMARTPANEL is not set -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_ILI9320 is not set -CONFIG_LCD_TDO24M=m -# CONFIG_LCD_VGG2432A4 is not set -# CONFIG_LCD_PLATFORM is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=m -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_DA903X=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -CONFIG_SND_ARM=y -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_LIB=m -CONFIG_SND_PXA2XX_LIB_AC97=y -CONFIG_SND_PXA2XX_AC97=m -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_AC97=m -CONFIG_SND_PXA2XX_SOC_EM_X270=m -# CONFIG_SND_SOC_ALL_CODECS is not set -CONFIG_SND_SOC_WM9712=m -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -CONFIG_HID_DEBUG=y -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set -# CONFIG_UWB is not set -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -CONFIG_MMC_PXA=m -# CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_TIFM_SD is not set -# CONFIG_MMC_SPI is not set -# CONFIG_MMC_SDRICOH_CS is not set -# CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=m -# CONFIG_LEDS_PCA955X is not set -CONFIG_LEDS_DA903X=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -CONFIG_RTC_DRV_V3020=y - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y -# CONFIG_DMADEVICES is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -CONFIG_REGULATOR_DA903X=m -# CONFIG_UIO is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=0 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -- cgit v0.10.2 From 432dc14fa40dea427d9ed476965001a816ff833b Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Feb 2009 08:57:58 +0200 Subject: [ARM] pxa: add em_x270_defconfig for EM-X270 and eXeda machines Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig new file mode 100644 index 0000000..1f75960 --- /dev/null +++ b/arch/arm/configs/em_x270_defconfig @@ -0,0 +1,1741 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc2 +# Sun Feb 1 16:43:31 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set +CONFIG_MACH_EM_X270=y +CONFIG_MACH_EXEDA=y +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_PWM is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=m +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=1 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_APMPOWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_DA9034 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_WM97XX=m +# CONFIG_TOUCHSCREEN_WM9705 is not set +CONFIG_TOUCHSCREEN_WM9712=y +# CONFIG_TOUCHSCREEN_WM9713 is not set +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_BATTERY_DA9030=y +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_PMIC_DA903X=y +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=m +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_PXA27x=m +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +# CONFIG_FB_MBX_DEBUG is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_TDO24M=y +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_DA903X=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y +# CONFIG_SND_PXA2XX_AC97 is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_EM_X270=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9712=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set +CONFIG_LEDS_DA903X=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_DA903X=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=0 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From db8ac47cfccaafd3fa4c5c15320809d44f4fcef9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 15:10:54 +0000 Subject: [ARM] omap: remove VIRTUAL_CLOCK Nothing tests the clock flags for this bit, so it serves no purpose. Remove it. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index c1dcdf1..d4ccba4 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -734,7 +734,7 @@ static struct clk mmc2_ck = { static struct clk virtual_ck_mpu = { .name = "mpu", .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, @@ -749,8 +749,7 @@ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | - ALWAYS_ENABLED, + CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, .parent = &armxor_ck.clk, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_generic, @@ -760,8 +759,7 @@ static struct clk i2c_fck = { static struct clk i2c_ick = { .name = "i2c_ick", .id = 1, - .flags = CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | + .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, .parent = &armper_ck.clk, .recalc = &followparent_recalc, diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index ad6d98d..8c57a2e 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2629,7 +2629,7 @@ static struct clk mmchsdb2_fck = { static struct clk virt_prcm_set = { .name = "virt_prcm_set", .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + ALWAYS_ENABLED | DELAYED_APP, .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ .set_rate = &omap2_select_table_rate, diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 7192985..4e8f59d 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -125,7 +125,6 @@ extern void clk_enable_init_clocks(void); #define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ #define RATE_FIXED (1 << 1) /* Fixed clock rate */ #define RATE_PROPAGATES (1 << 2) /* Program children too */ -#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ #define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ #define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ #define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ -- cgit v0.10.2 From 548d849574847b788fe846fe21a41386063be161 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 14:02:46 +0000 Subject: [ARM] omap: introduce clock operations structure Collect up all the common enable/disable clock operation functions into a separate operations structure. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5fba207..25ef04d 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -26,8 +26,17 @@ #include #include +static const struct clkops clkops_generic; +static const struct clkops clkops_uart; +static const struct clkops clkops_dspck; + #include "clock.h" +static int omap1_clk_enable_generic(struct clk * clk); +static int omap1_clk_enable(struct clk *clk); +static void omap1_clk_disable_generic(struct clk * clk); +static void omap1_clk_disable(struct clk *clk); + __u32 arm_idlect1_mask; /*------------------------------------------------------------------------- @@ -78,6 +87,11 @@ static void omap1_clk_disable_dsp_domain(struct clk *clk) } } +static const struct clkops clkops_dspck = { + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + static int omap1_clk_enable_uart_functional(struct clk *clk) { int ret; @@ -105,6 +119,11 @@ static void omap1_clk_disable_uart_functional(struct clk *clk) omap1_clk_disable_generic(clk); } +static const struct clkops clkops_uart = { + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, +}; + static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -468,7 +487,7 @@ static int omap1_clk_enable(struct clk *clk) omap1_clk_deny_idle(clk->parent); } - ret = clk->enable(clk); + ret = clk->ops->enable(clk); if (unlikely(ret != 0) && clk->parent) { omap1_clk_disable(clk->parent); @@ -482,7 +501,7 @@ static int omap1_clk_enable(struct clk *clk) static void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { - clk->disable(clk); + clk->ops->disable(clk); if (likely(clk->parent)) { omap1_clk_disable(clk->parent); if (clk->flags & CLOCK_NO_IDLE_PARENT) @@ -561,6 +580,11 @@ static void omap1_clk_disable_generic(struct clk *clk) } } +static const struct clkops clkops_generic = { + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { int dsor_exp; @@ -659,7 +683,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk) } printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); - clk->disable(clk); + clk->ops->disable(clk); printk(" done\n"); } diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index d4ccba4..5b93a2a 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -13,27 +13,19 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static int omap1_clk_enable_generic(struct clk * clk); -static void omap1_clk_disable_generic(struct clk * clk); static void omap1_ckctl_recalc(struct clk * clk); static void omap1_watchdog_recalc(struct clk * clk); static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); static void omap1_sossi_recalc(struct clk *clk); static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); -static int omap1_clk_enable_dsp_domain(struct clk * clk); static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static void omap1_clk_disable_dsp_domain(struct clk * clk); static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); static void omap1_uart_recalc(struct clk * clk); -static int omap1_clk_enable_uart_functional(struct clk * clk); -static void omap1_clk_disable_uart_functional(struct clk * clk); static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); static void omap1_init_ext_clk(struct clk * clk); static int omap1_select_table_rate(struct clk * clk, unsigned long rate); static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable(struct clk *clk); struct mpu_rate { unsigned long rate; @@ -152,39 +144,37 @@ static struct mpu_rate rate_table[] = { static struct clk ck_ref = { .name = "ck_ref", + .ops = &clkops_generic, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk ck_dpll1 = { .name = "ck_dpll1", + .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk ck_dpll1out = { .clk = { .name = "ck_dpll1out", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | RATE_PROPAGATES, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 12, }; static struct clk sossi_ck = { .name = "ck_sossi", + .ops = &clkops_generic, .parent = &ck_dpll1out.clk, .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, @@ -192,25 +182,23 @@ static struct clk sossi_ck = { .enable_bit = 16, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk arm_ck = { .name = "arm_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk armper_ck = { .clk = { .name = "armper_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | RATE_CKCTL | @@ -219,34 +207,30 @@ static struct arm_idlect1_clk armper_ck = { .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 2, }; static struct clk arm_gpio_ck = { .name = "arm_gpio_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_GPIOCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk armxor_ck = { .clk = { .name = "armxor_ck", + .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 1, }; @@ -254,14 +238,13 @@ static struct arm_idlect1_clk armxor_ck = { static struct arm_idlect1_clk armtim_ck = { .clk = { .name = "armtim_ck", + .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 9, }; @@ -269,20 +252,20 @@ static struct arm_idlect1_clk armtim_ck = { static struct arm_idlect1_clk armwdt_ck = { .clk = { .name = "armwdt_ck", + .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_WDTCK, .recalc = &omap1_watchdog_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 0, }; static struct clk arminth_ck16xx = { .name = "arminth_ck", + .ops = &clkops_generic, .parent = &arm_ck, .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, @@ -291,12 +274,11 @@ static struct clk arminth_ck16xx = { * * 1510 version is in TC clocks. */ - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dsp_ck = { .name = "dsp_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, @@ -304,23 +286,21 @@ static struct clk dsp_ck = { .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dspmmu_ck = { .name = "dspmmu_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | ALWAYS_ENABLED, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dspper_ck = { .name = "dspper_ck", + .ops = &clkops_dspck, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | VIRTUAL_IO_ADDRESS, @@ -329,38 +309,35 @@ static struct clk dspper_ck = { .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc_dsp_domain, .set_rate = &omap1_clk_set_rate_dsp_domain, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; static struct clk dspxor_ck = { .name = "dspxor_ck", + .ops = &clkops_dspck, .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; static struct clk dsptim_ck = { .name = "dsptim_ck", + .ops = &clkops_dspck, .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; /* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | @@ -368,14 +345,13 @@ static struct arm_idlect1_clk tc_ck = { ALWAYS_ENABLED | CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 6, }; static struct clk arminth_ck1510 = { .name = "arminth_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, @@ -384,86 +360,77 @@ static struct clk arminth_ck1510 = { * * 16xx version is in MPU clocks. */ - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tipb_ck = { /* No-idle controlled by "tc_ck" */ .name = "tipb_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk l3_ocpi_ck = { /* No-idle controlled by "tc_ck" */ .name = "l3_ocpi_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_OCPI_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tc1_ck = { .name = "tc1_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_TC1_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tc2_ck = { .name = "tc2_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_TC2_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dma_ck = { /* No-idle controlled by "tc_ck" */ .name = "dma_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk api_ck = { .clk = { .name = "api_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_APICK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 8, }; @@ -471,51 +438,48 @@ static struct arm_idlect1_clk api_ck = { static struct arm_idlect1_clk lb_ck = { .clk = { .name = "lb_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LBCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 4, }; static struct clk rhea1_ck = { .name = "rhea1_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk rhea2_ck = { .name = "rhea2_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk lcd_ck_16xx = { .name = "lcd_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk lcd_ck_1510 = { .clk = { .name = "lcd_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_CKCTL | CLOCK_IDLE_CONTROL, @@ -523,14 +487,13 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 3, }; static struct clk uart1_1510 = { .name = "uart1_ck", + .ops = &clkops_generic, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, @@ -541,13 +504,12 @@ static struct clk uart1_1510 = { .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct uart_clk uart1_16xx = { .clk = { .name = "uart1_ck", + .ops = &clkops_uart, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, @@ -555,14 +517,13 @@ static struct uart_clk uart1_16xx = { ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 29, - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, }, .sysc_addr = 0xfffb0054, }; static struct clk uart2_ck = { .name = "uart2_ck", + .ops = &clkops_generic, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, @@ -573,12 +534,11 @@ static struct clk uart2_ck = { .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk uart3_1510 = { .name = "uart3_ck", + .ops = &clkops_generic, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, @@ -589,13 +549,12 @@ static struct clk uart3_1510 = { .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct uart_clk uart3_16xx = { .clk = { .name = "uart3_ck", + .ops = &clkops_uart, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, @@ -603,38 +562,35 @@ static struct uart_clk uart3_16xx = { ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 31, - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, }, .sysc_addr = 0xfffb9854, }; static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .name = "usb_clko", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 6000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, .enable_bit = USB_MCLK_EN_BIT, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_hhc_ck1510 = { .name = "usb_hhc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = USB_HOST_HHC_UHOST_EN, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_hhc_ck16xx = { .name = "usb_hhc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ @@ -642,34 +598,31 @@ static struct clk usb_hhc_ck16xx = { RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, .enable_bit = 8 /* UHOST_EN */, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_dc_ck = { .name = "usb_dc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, .enable_reg = (void __iomem *)SOFT_REQ_REG, .enable_bit = 4, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mclk_1510 = { .name = "mclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, .enable_reg = (void __iomem *)SOFT_REQ_REG, .enable_bit = 6, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mclk_16xx = { .name = "mclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, @@ -677,21 +630,19 @@ static struct clk mclk_16xx = { .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, .init = &omap1_init_ext_clk, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk bclk_1510 = { .name = "bclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk bclk_16xx = { .name = "bclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, @@ -699,12 +650,11 @@ static struct clk bclk_16xx = { .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, .init = &omap1_init_ext_clk, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mmc1_ck = { .name = "mmc_ck", + .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, @@ -713,13 +663,12 @@ static struct clk mmc1_ck = { CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 23, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mmc2_ck = { .name = "mmc_ck", .id = 1, + .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, @@ -727,20 +676,17 @@ static struct clk mmc2_ck = { RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 20, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk virtual_ck_mpu = { .name = "mpu", + .ops = &clkops_generic, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, .round_rate = &omap1_round_to_table_rate, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK @@ -748,23 +694,21 @@ remains active during MPU idle whenever this is enabled */ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, + .ops = &clkops_generic, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, .parent = &armxor_ck.clk, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk i2c_ick = { .name = "i2c_ick", .id = 1, + .ops = &clkops_generic, .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, .parent = &armper_ck.clk, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk * onchip_clks[] = { diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ad721e0..d3213f5 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -274,8 +274,8 @@ int _omap2_clk_enable(struct clk *clk) if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) return 0; - if (clk->enable) - return clk->enable(clk); + if (clk->ops && clk->ops->enable) + return clk->ops->enable(clk); if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", @@ -304,8 +304,8 @@ void _omap2_clk_disable(struct clk *clk) if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) return; - if (clk->disable) { - clk->disable(clk); + if (clk->ops && clk->ops->disable) { + clk->ops->disable(clk); return; } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index d382eb0..866a618 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -34,12 +34,16 @@ #include "memory.h" #include "clock.h" -#include "clock24xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" #include "cm-regbits-24xx.h" +static const struct clkops clkops_oscck; +static const struct clkops clkops_fixed; + +#include "clock24xx.h" + /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ #define EN_APLL_STOPPED 0 #define EN_APLL_LOCKED 3 @@ -96,6 +100,11 @@ static void omap2_disable_osc_ck(struct clk *clk) OMAP24XX_PRCM_CLKSRC_CTRL); } +static const struct clkops clkops_oscck = { + .enable = &omap2_enable_osc_ck, + .disable = &omap2_disable_osc_ck, +}; + #ifdef OLD_CK /* Recalculate SYST_CLK */ static void omap2_sys_clk_recalc(struct clk * clk) @@ -149,6 +158,11 @@ static void omap2_clk_fixed_disable(struct clk *clk) cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); } +static const struct clkops clkops_fixed = { + .enable = &omap2_clk_fixed_enable, + .disable = &omap2_clk_fixed_disable, +}; + /* * Uses the current prcm set to tell if a rate is valid. * You can go slower, but not faster within a given rate set. diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 8c57a2e..2aa0b5e 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -31,10 +31,6 @@ static void omap2_sys_clk_recalc(struct clk *clk); static void omap2_osc_clk_recalc(struct clk *clk); static void omap2_sys_clk_recalc(struct clk *clk); static void omap2_dpllcore_recalc(struct clk *clk); -static int omap2_clk_fixed_enable(struct clk *clk); -static void omap2_clk_fixed_disable(struct clk *clk); -static int omap2_enable_osc_ck(struct clk *clk); -static void omap2_disable_osc_ck(struct clk *clk); static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. @@ -633,11 +629,10 @@ static struct clk func_32k_ck = { /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", + .ops = &clkops_oscck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, .recalc = &omap2_osc_clk_recalc, }; @@ -695,6 +690,7 @@ static struct clk dpll_ck = { static struct clk apll96_ck = { .name = "apll96_ck", + .ops = &clkops_fixed, .parent = &sys_ck, .rate = 96000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | @@ -702,13 +698,12 @@ static struct clk apll96_ck = { .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, .recalc = &propagate_rate, }; static struct clk apll54_ck = { .name = "apll54_ck", + .ops = &clkops_fixed, .parent = &sys_ck, .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | @@ -716,8 +711,6 @@ static struct clk apll54_ck = { .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, .recalc = &propagate_rate, }; diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 31bb701..2f2d43d 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -33,12 +33,15 @@ #include "memory.h" #include "clock.h" -#include "clock34xx.h" #include "prm.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" +static const struct clkops clkops_noncore_dpll_ops; + +#include "clock34xx.h" + /* CM_AUTOIDLE_PLL*.AUTO_* bit values */ #define DPLL_AUTOIDLE_DISABLE 0x0 #define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 @@ -270,6 +273,11 @@ static void omap3_noncore_dpll_disable(struct clk *clk) _omap3_noncore_dpll_stop(clk); } +static const struct clkops clkops_noncore_dpll_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, +}; + /** * omap3_dpll_autoidle_read - read a DPLL's autoidle bits * @clk: struct clk * of the DPLL to read diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index a826094..8b188fb 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -32,8 +32,6 @@ static void omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); static void omap3_dpll_deny_idle(struct clk *clk); static u32 omap3_dpll_autoidle_read(struct clk *clk); -static int omap3_noncore_dpll_enable(struct clk *clk); -static void omap3_noncore_dpll_disable(struct clk *clk); /* Maximum DPLL multiplier, divider values for OMAP3 */ #define OMAP3_MAX_DPLL_MULT 2048 @@ -347,11 +345,10 @@ static struct dpll_data dpll2_dd = { static struct clk dpll2_ck = { .name = "dpll2_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll2_dd, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -582,11 +579,10 @@ static struct dpll_data dpll4_dd = { static struct clk dpll4_ck = { .name = "dpll4_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll4_dd, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -884,11 +880,10 @@ static struct dpll_data dpll5_dd = { static struct clk dpll5_ck = { .name = "dpll5_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll5_dd, .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 4e8f59d..4fe5084e 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -17,6 +17,11 @@ struct module; struct clk; struct clockdomain; +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); +}; + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) struct clksel_rate { @@ -59,6 +64,7 @@ struct dpll_data { struct clk { struct list_head node; + const struct clkops *ops; struct module *owner; const char *name; int id; @@ -72,8 +78,6 @@ struct clk { int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); - int (*enable)(struct clk *); - void (*disable)(struct clk *); #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) u8 fixed_div; void __iomem *clksel_reg; -- cgit v0.10.2 From 88800b2f2ffd3e436266e4dff9586d48b5b54500 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 6 Feb 2009 21:56:04 +0000 Subject: [ARM] orion5x: add rtc-m48t86 to orion5x_defconfig The TS-7800 can have a M48T86 RTC onboard Signed-off-by: Alexander Clouter diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index b2456ca..45dcd08 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1177,7 +1177,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T86=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set -- cgit v0.10.2 From c3dfdb0823213c81f60987c8a3770b89ea95cad6 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 6 Feb 2009 21:57:13 +0000 Subject: [ARM] orion5x: remove TS-78xx NOR support as it does not exist The TS-7800's M25P40 is not available to the kernel, it's used to load the initial bitstream onto the FPGA and so these hooks point to nothing and need to be removed. Signed-off-by: Alexander Clouter diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 1368e9f..0cb34b9 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -40,12 +39,6 @@ #define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) #define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) -/* - * 512kB NOR flash Device - */ -#define TS78XX_NOR_BOOT_BASE 0xff800000 -#define TS78XX_NOR_BOOT_SIZE SZ_512K - /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -65,41 +58,6 @@ void __init ts78xx_map_io(void) } /***************************************************************************** - * 512kB NOR Boot Flash - the chip is a M25P40 - ****************************************************************************/ -static struct mtd_partition ts78xx_nor_boot_flash_resources[] = { - { - .name = "ts-bootrom", - .offset = 0, - /* only the first 256kB is used */ - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data ts78xx_nor_boot_flash_data = { - .width = 1, - .parts = ts78xx_nor_boot_flash_resources, - .nr_parts = ARRAY_SIZE(ts78xx_nor_boot_flash_resources), -}; - -static struct resource ts78xx_nor_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = TS78XX_NOR_BOOT_BASE, - .end = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device ts78xx_nor_boot_flash = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = &ts78xx_nor_boot_flash_data, - }, - .num_resources = 1, - .resource = &ts78xx_nor_boot_flash_resource, -}; - -/***************************************************************************** * Ethernet ****************************************************************************/ static struct mv643xx_eth_platform_data ts78xx_eth_data = { @@ -257,10 +215,6 @@ static void __init ts78xx_init(void) orion5x_uart1_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE, - TS78XX_NOR_BOOT_SIZE); - platform_device_register(&ts78xx_nor_boot_flash); - if (!ts78xx_rtc_init()) printk(KERN_INFO "TS-78xx RTC not detected or enabled\n"); } -- cgit v0.10.2 From f54128609c4e7792fb52b03c3db0da78627ce607 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 6 Feb 2009 21:59:15 +0000 Subject: [ARM] orion5x: TS-78xx comment shifting moved the MPP comments to the mpp area of the platform code Signed-off-by: Alexander Clouter diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 0cb34b9..b194956 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -181,6 +181,14 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { { 17, MPP_UART }, { 18, MPP_UART }, { 19, MPP_UART }, + /* + * MPP[20] PCI Clock Out 1 + * MPP[21] PCI Clock Out 0 + * MPP[22] Unused + * MPP[23] Unused + * MPP[24] Unused + * MPP[25] Unused + */ { -1 }, }; @@ -196,15 +204,6 @@ static void __init ts78xx_init(void) orion5x_mpp_conf(ts78xx_mpp_modes); /* - * MPP[20] PCI Clock Out 1 - * MPP[21] PCI Clock Out 0 - * MPP[22] Unused - * MPP[23] Unused - * MPP[24] Unused - * MPP[25] Unused - */ - - /* * Configure peripherals. */ orion5x_ehci0_init(); -- cgit v0.10.2 From 39008f959f4f3b60eecc5cec0ca077146c1f366b Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 6 Feb 2009 22:16:55 +0000 Subject: [ARM] orion5x: TS-78xx support for 'hotplug' of FPGA devices the FPGA on the TS-7800 provides access to a number of devices and so we have to be careful when reprogramming it. As we are effectively turning a bus off/on we have to inform the kernel that it should stop using anything provided by the FPGA (currently only the RTC however the NAND, LCD, etc is to come) before it's reprogrammed. Once reprogramed, we can tell the kernel to (re)enable things by checking the FPGA ID against a lookup table for what a particular FPGA bitstream can provide. Signed-off-by: Alexander Clouter diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index f59a8d0..2c7035d 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -71,6 +71,7 @@ config MACH_WRT350N_V2 config MACH_TS78XX bool "Technologic Systems TS-78xx" + select PM help Say 'Y' here if you want your kernel to support the Technologic Systems TS-78xx platform. diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h new file mode 100644 index 0000000..0b8e30f --- /dev/null +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -0,0 +1,27 @@ +#define FPGAID(_magic, _rev) ((_magic << 8) + _rev) + +/* + * get yer id's from http://ts78xx.digriz.org.uk/ + * do *not* make up your own or 'borrow' any! + */ +enum fpga_ids { + /* Technologic Systems */ + TS7800_REV_B = FPGAID(0x00b480, 0x03), +}; + +struct fpga_device { + unsigned present:1; + unsigned init:1; +}; + +struct fpga_devices { + /* Technologic Systems */ + struct fpga_device ts_rtc; +}; + +struct ts78xx_fpga_data { + unsigned int id; + int state; + + struct fpga_devices supports; +}; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index b194956..baa25d0 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -20,6 +21,7 @@ #include #include "common.h" #include "mpp.h" +#include "ts78xx-fpga.h" /***************************************************************************** * TS-78xx Info @@ -32,12 +34,11 @@ #define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000 #define TS78XX_FPGA_REGS_SIZE SZ_1M -#define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000) -#define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004) -#define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008) - -#define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) -#define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) +static struct ts78xx_fpga_data ts78xx_fpga = { + .id = 0, + .state = 1, +/* .supports = ... - populated by ts78xx_fpga_supports() */ +}; /***************************************************************************** * I/O Address Mapping @@ -65,31 +66,41 @@ static struct mv643xx_eth_platform_data ts78xx_eth_data = { }; /***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data ts78xx_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c ****************************************************************************/ #ifdef CONFIG_RTC_DRV_M48T86 -static unsigned char ts78xx_rtc_readbyte(unsigned long addr) +#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) +#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) + +static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr) { - writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); - return readb(TS78XX_FPGA_REGS_RTC_DATA); + writeb(addr, TS_RTC_CTRL); + return readb(TS_RTC_DATA); } -static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr) +static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr) { - writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); - writeb(value, TS78XX_FPGA_REGS_RTC_DATA); + writeb(addr, TS_RTC_CTRL); + writeb(value, TS_RTC_DATA); } -static struct m48t86_ops ts78xx_rtc_ops = { - .readbyte = ts78xx_rtc_readbyte, - .writebyte = ts78xx_rtc_writebyte, +static struct m48t86_ops ts78xx_ts_rtc_ops = { + .readbyte = ts78xx_ts_rtc_readbyte, + .writebyte = ts78xx_ts_rtc_writebyte, }; -static struct platform_device ts78xx_rtc_device = { +static struct platform_device ts78xx_ts_rtc_device = { .name = "rtc-m48t86", .id = -1, .dev = { - .platform_data = &ts78xx_rtc_ops, + .platform_data = &ts78xx_ts_rtc_ops, }, .num_resources = 0, }; @@ -104,59 +115,185 @@ static struct platform_device ts78xx_rtc_device = { * TODO: track down a guinea pig without an RTC to see if we can work out a * better RTC detection routine */ -static int __init ts78xx_rtc_init(void) +static int ts78xx_ts_rtc_load(void) { unsigned char tmp_rtc0, tmp_rtc1; - tmp_rtc0 = ts78xx_rtc_readbyte(126); - tmp_rtc1 = ts78xx_rtc_readbyte(127); - - ts78xx_rtc_writebyte(0x00, 126); - ts78xx_rtc_writebyte(0x55, 127); - if (ts78xx_rtc_readbyte(127) == 0x55) { - ts78xx_rtc_writebyte(0xaa, 127); - if (ts78xx_rtc_readbyte(127) == 0xaa - && ts78xx_rtc_readbyte(126) == 0x00) { - ts78xx_rtc_writebyte(tmp_rtc0, 126); - ts78xx_rtc_writebyte(tmp_rtc1, 127); - platform_device_register(&ts78xx_rtc_device); - return 1; + tmp_rtc0 = ts78xx_ts_rtc_readbyte(126); + tmp_rtc1 = ts78xx_ts_rtc_readbyte(127); + + ts78xx_ts_rtc_writebyte(0x00, 126); + ts78xx_ts_rtc_writebyte(0x55, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0x55) { + ts78xx_ts_rtc_writebyte(0xaa, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0xaa + && ts78xx_ts_rtc_readbyte(126) == 0x00) { + ts78xx_ts_rtc_writebyte(tmp_rtc0, 126); + ts78xx_ts_rtc_writebyte(tmp_rtc1, 127); + if (ts78xx_fpga.supports.ts_rtc.init == 0) { + ts78xx_fpga.supports.ts_rtc.init = 1; + platform_device_register(&ts78xx_ts_rtc_device); + } else + platform_device_add(&ts78xx_ts_rtc_device); + return 0; } } - return 0; + ts78xx_fpga.supports.ts_rtc.present = 0; + return -ENODEV; }; + +static void ts78xx_ts_rtc_unload(void) +{ + platform_device_del(&ts78xx_ts_rtc_device); +} #else -static int __init ts78xx_rtc_init(void) +static int ts78xx_ts_rtc_load(void) { return 0; } + +static void ts78xx_ts_rtc_unload(void) +{ +} #endif /***************************************************************************** - * SATA + * FPGA 'hotplug' support code ****************************************************************************/ -static struct mv_sata_platform_data ts78xx_sata_data = { - .n_ports = 2, +static void ts78xx_fpga_devices_zero_init(void) +{ + ts78xx_fpga.supports.ts_rtc.init = 0; +} + +static void ts78xx_fpga_supports(void) +{ + /* TODO: put this 'table' into ts78xx-fpga.h */ + switch (ts78xx_fpga.id) { + case TS7800_REV_B: + ts78xx_fpga.supports.ts_rtc.present = 1; + break; + default: + ts78xx_fpga.supports.ts_rtc.present = 0; + } +} + +static int ts78xx_fpga_load_devices(void) +{ + int tmp, ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) { + tmp = ts78xx_ts_rtc_load(); + if (tmp) + printk(KERN_INFO "TS-78xx RTC not detected or enabled\n"); + ret |= tmp; + } + + return ret; +} + +static int ts78xx_fpga_unload_devices(void) +{ + int ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) + ts78xx_ts_rtc_unload(); + + return ret; +} + +static int ts78xx_fpga_load(void) +{ + ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, + ts78xx_fpga.id & 0xff); + + ts78xx_fpga_supports(); + + if (ts78xx_fpga_load_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; }; -/***************************************************************************** - * print some information regarding the board - ****************************************************************************/ -static void __init ts78xx_print_board_id(void) -{ - unsigned int board_info; - - board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID); - printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ", - board_info & 0xff, - (board_info >> 8) & 0xffffff); - board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI); - printk("JP1=%d, JP2=%d\n", - (board_info >> 30) & 0x1, - (board_info >> 31) & 0x1); +static int ts78xx_fpga_unload(void) +{ + unsigned int fpga_id; + + fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + /* + * There does not seem to be a feasible way to block access to the GPIO + * pins from userspace (/dev/mem). This if clause should hopefully warn + * those foolish enough not to follow 'policy' :) + * + * UrJTAG SVN since r1381 can be used to reprogram the FPGA + */ + if (ts78xx_fpga.id != fpga_id) { + printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n" + "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, + (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); + ts78xx_fpga.state = -1; + return -EBUSY; + } + + if (ts78xx_fpga_unload_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; }; +static ssize_t ts78xx_fpga_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + if (ts78xx_fpga.state < 0) + return sprintf(buf, "borked\n"); + + return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); +} + +static ssize_t ts78xx_fpga_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t n) +{ + int value, ret; + + if (ts78xx_fpga.state < 0) { + printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n"); + return -EBUSY; + } + + if (strncmp(buf, "online", sizeof("online") - 1) == 0) + value = 1; + else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) + value = 0; + else { + printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n"); + return -EINVAL; + } + + if (ts78xx_fpga.state == value) + return n; + + ret = (ts78xx_fpga.state == 0) + ? ts78xx_fpga_load() + : ts78xx_fpga_unload(); + + if (!(ret < 0)) + ts78xx_fpga.state = value; + + return n; +} + +static struct kobj_attribute ts78xx_fpga_attr = + __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); + /***************************************************************************** * General Setup ****************************************************************************/ @@ -194,13 +331,13 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { static void __init ts78xx_init(void) { + int ret; + /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); - ts78xx_print_board_id(); - orion5x_mpp_conf(ts78xx_mpp_modes); /* @@ -214,8 +351,12 @@ static void __init ts78xx_init(void) orion5x_uart1_init(); orion5x_xor_init(); - if (!ts78xx_rtc_init()) - printk(KERN_INFO "TS-78xx RTC not detected or enabled\n"); + /* FPGA init */ + ts78xx_fpga_devices_zero_init(); + ret = ts78xx_fpga_load(); + ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); + if (ret) + printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") -- cgit v0.10.2 From 897dcded6fb6565f4d1c22a55d21f135403db132 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 16:35:03 +0000 Subject: [ARM] omap: provide a NULL clock operations structure ... and use it for clocks which are ALWAYS_ENABLED. These clocks use a non-NULL enable_reg pointer for other purposes (such as selecting clock rates.) Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 25ef04d..ff40810 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -515,9 +515,6 @@ static int omap1_clk_enable_generic(struct clk *clk) __u16 regval16; __u32 regval32; - if (clk->flags & ALWAYS_ENABLED) - return 0; - if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 5b93a2a..8673832 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -144,18 +144,18 @@ static struct mpu_rate rate_table[] = { static struct clk ck_ref = { .name = "ck_ref", - .ops = &clkops_generic, + .ops = &clkops_null, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ALWAYS_ENABLED, + CLOCK_IN_OMAP310, }; static struct clk ck_dpll1 = { .name = "ck_dpll1", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | RATE_PROPAGATES, }; static struct arm_idlect1_clk ck_dpll1out = { @@ -186,11 +186,10 @@ static struct clk sossi_ck = { static struct clk arm_ck = { .name = "arm_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES | - ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, }; @@ -265,9 +264,9 @@ static struct arm_idlect1_clk armwdt_ck = { static struct clk arminth_ck16xx = { .name = "arminth_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 @@ -290,10 +289,10 @@ static struct clk dsp_ck = { static struct clk dspmmu_ck = { .name = "dspmmu_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | ALWAYS_ENABLED, + RATE_CKCTL, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, }; @@ -337,12 +336,12 @@ static struct clk dsptim_ck = { static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES | - ALWAYS_ENABLED | CLOCK_IDLE_CONTROL, + CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, }, @@ -351,10 +350,9 @@ static struct arm_idlect1_clk tc_ck = { static struct clk arminth_ck1510 = { .name = "arminth_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * @@ -365,10 +363,9 @@ static struct clk arminth_ck1510 = { static struct clk tipb_ck = { /* No-idle controlled by "tc_ck" */ .name = "tipb_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .recalc = &followparent_recalc, }; @@ -406,18 +403,18 @@ static struct clk tc2_ck = { static struct clk dma_ck = { /* No-idle controlled by "tc_ck" */ .name = "dma_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ALWAYS_ENABLED, + CLOCK_IN_OMAP310, .recalc = &followparent_recalc, }; static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; @@ -451,17 +448,17 @@ static struct arm_idlect1_clk lb_ck = { static struct clk rhea1_ck = { .name = "rhea1_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; static struct clk rhea2_ck = { .name = "rhea2_ck", - .ops = &clkops_generic, + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; @@ -493,13 +490,12 @@ static struct arm_idlect1_clk lcd_ck_1510 = { static struct clk uart1_1510 = { .name = "uart1_ck", - .ops = &clkops_generic, + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | ALWAYS_ENABLED | - CLOCK_NO_IDLE_PARENT, + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -523,13 +519,13 @@ static struct uart_clk uart1_16xx = { static struct clk uart2_ck = { .name = "uart2_ck", - .ops = &clkops_generic, + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP310 | ENABLE_REG_32BIT | - ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -538,13 +534,12 @@ static struct clk uart2_ck = { static struct clk uart3_1510 = { .name = "uart3_ck", - .ops = &clkops_generic, + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | ALWAYS_ENABLED | - CLOCK_NO_IDLE_PARENT, + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -680,9 +675,9 @@ static struct clk mmc2_ck = { static struct clk virtual_ck_mpu = { .name = "mpu", - .ops = &clkops_generic, + .ops = &clkops_null, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ALWAYS_ENABLED, + CLOCK_IN_OMAP310, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, @@ -694,9 +689,9 @@ remains active during MPU idle whenever this is enabled */ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, - .ops = &clkops_generic, + .ops = &clkops_null, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED, + CLOCK_NO_IDLE_PARENT, .parent = &armxor_ck.clk, .recalc = &followparent_recalc, }; @@ -704,9 +699,8 @@ static struct clk i2c_fck = { static struct clk i2c_ick = { .name = "i2c_ick", .id = 1, - .ops = &clkops_generic, - .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | - ALWAYS_ENABLED, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT, .parent = &armper_ck.clk, .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d3213f5..fa99c0b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -271,7 +271,7 @@ int _omap2_clk_enable(struct clk *clk) { u32 regval32; - if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) + if (clk->flags & PARENT_CONTROLS_CLOCK) return 0; if (clk->ops && clk->ops->enable) @@ -301,7 +301,7 @@ void _omap2_clk_disable(struct clk *clk) { u32 regval32; - if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) + if (clk->flags & PARENT_CONTROLS_CLOCK) return; if (clk->ops && clk->ops->disable) { diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 2aa0b5e..d486937 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -619,9 +619,10 @@ static struct prcm_config rate_table[] = { /* Base external input clocks */ static struct clk func_32k_ck = { .name = "func_32k_ck", + .ops = &clkops_null, .rate = 32000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -639,18 +640,20 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ /* Without modem likely 12MHz, with modem likely 13MHz */ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ + .ops = &clkops_null, .parent = &osc_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .name = "alt_ck", + .ops = &clkops_null, .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -679,10 +682,11 @@ static struct dpll_data dpll_dd = { */ static struct clk dpll_ck = { .name = "dpll_ck", + .ops = &clkops_null, .parent = &sys_ck, /* Can be func_32k also */ .dpll_data = &dpll_dd, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | ALWAYS_ENABLED, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, @@ -751,9 +755,10 @@ static struct clk func_54m_ck = { static struct clk core_ck = { .name = "core_ck", + .ops = &clkops_null, .parent = &dpll_ck, /* can also be 32k */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -837,6 +842,7 @@ static struct clk func_12m_ck = { /* Secure timer, only available in secure mode */ static struct clk wdt1_osc_ck = { .name = "ck_wdt1_osc", + .ops = &clkops_null, /* RMK: missing? */ .parent = &osc_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .recalc = &followparent_recalc, @@ -996,9 +1002,10 @@ static const struct clksel mpu_clksel[] = { static struct clk mpu_ck = { /* Control cpu */ .name = "mpu_ck", + .ops = &clkops_null, .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | + DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, @@ -1168,9 +1175,10 @@ static const struct clksel core_l3_clksel[] = { static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .name = "core_l3_ck", + .ops = &clkops_null, .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | + DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), @@ -1231,9 +1239,10 @@ static const struct clksel l4_clksel[] = { static struct clk l4_ck = { /* used both as an ick and fck */ .name = "l4_ck", + .ops = &clkops_null, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, + DELAYED_APP | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, @@ -2359,6 +2368,7 @@ static struct clk i2chs1_fck = { static struct clk gpmc_fck = { .name = "gpmc_fck", + .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, @@ -2368,6 +2378,7 @@ static struct clk gpmc_fck = { static struct clk sdma_fck = { .name = "sdma_fck", + .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", @@ -2376,6 +2387,7 @@ static struct clk sdma_fck = { static struct clk sdma_ick = { .name = "sdma_ick", + .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", @@ -2621,8 +2633,9 @@ static struct clk mmchsdb2_fck = { */ static struct clk virt_prcm_set = { .name = "virt_prcm_set", + .ops = &clkops_null, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP, + DELAYED_APP, .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ .set_rate = &omap2_select_table_rate, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 8b188fb..b56fd28 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -55,66 +55,66 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk); /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ static struct clk omap_32k_fck = { .name = "omap_32k_fck", + .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk secure_32k_fck = { .name = "secure_32k_fck", + .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; /* Virtual source clocks for osc_sys_ck */ static struct clk virt_12m_ck = { .name = "virt_12m_ck", + .ops = &clkops_null, .rate = 12000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk virt_13m_ck = { .name = "virt_13m_ck", + .ops = &clkops_null, .rate = 13000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk virt_16_8m_ck = { .name = "virt_16_8m_ck", + .ops = &clkops_null, .rate = 16800000, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk virt_19_2m_ck = { .name = "virt_19_2m_ck", + .ops = &clkops_null, .rate = 19200000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk virt_26m_ck = { .name = "virt_26m_ck", + .ops = &clkops_null, .rate = 26000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", + .ops = &clkops_null, .rate = 38400000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &propagate_rate, }; @@ -162,13 +162,13 @@ static const struct clksel osc_sys_clksel[] = { /* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ static struct clk osc_sys_ck = { .name = "osc_sys_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_PRM_CLKSEL, .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, .clksel = osc_sys_clksel, /* REVISIT: deal with autoextclkmode? */ - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -187,25 +187,28 @@ static const struct clksel sys_clksel[] = { /* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ static struct clk sys_ck = { .name = "sys_ck", + .ops = &clkops_null, .parent = &osc_sys_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, .clksel_mask = OMAP_SYSCLKDIV_MASK, .clksel = sys_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; static struct clk sys_altclk = { .name = "sys_altclk", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &propagate_rate, }; /* Optional external clock input for some McBSPs */ static struct clk mcbsp_clks = { .name = "mcbsp_clks", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &propagate_rate, }; @@ -278,9 +281,10 @@ static struct dpll_data dpll1_dd = { static struct clk dpll1_ck = { .name = "dpll1_ck", + .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll1_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -398,9 +402,10 @@ static struct dpll_data dpll3_dd = { static struct clk dpll3_ck = { .name = "dpll3_ck", + .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll3_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -2266,9 +2271,10 @@ static struct clk gpt1_fck = { static struct clk wkup_32k_fck = { .name = "wkup_32k_fck", + .ops = &clkops_null, .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2295,8 +2301,9 @@ static struct clk wdt2_fck = { static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", + .ops = &clkops_null, .parent = &sys_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2514,9 +2521,10 @@ static struct clk gpt9_fck = { static struct clk per_32k_alwon_fck = { .name = "per_32k_alwon_fck", + .ops = &clkops_null, .parent = &omap_32k_fck, .clkdm_name = "per_clkdm", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2859,11 +2867,12 @@ static const struct clksel emu_src_clksel[] = { */ static struct clk emu_src_ck = { .name = "emu_src_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2883,11 +2892,12 @@ static const struct clksel pclk_emu_clksel[] = { static struct clk pclk_fck = { .name = "pclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2906,11 +2916,12 @@ static const struct clksel pclkx2_emu_clksel[] = { static struct clk pclkx2_fck = { .name = "pclkx2_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2922,22 +2933,24 @@ static const struct clksel atclk_emu_clksel[] = { static struct clk atclk_fck = { .name = "atclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk traceclk_src_fck = { .name = "traceclk_src_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2956,11 +2969,12 @@ static const struct clksel traceclk_clksel[] = { static struct clk traceclk_fck = { .name = "traceclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, .clksel = traceclk_clksel, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2989,6 +3003,7 @@ static struct clk sr2_fck = { static struct clk sr_l4_ick = { .name = "sr_l4_ick", + .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", @@ -3000,15 +3015,17 @@ static struct clk sr_l4_ick = { /* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", + .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk wdt1_fck = { .name = "wdt1_fck", + .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index be6aab9..529c4a9 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -358,6 +358,23 @@ void clk_enable_init_clocks(void) } EXPORT_SYMBOL(clk_enable_init_clocks); +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + #ifdef CONFIG_CPU_FREQ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { @@ -383,8 +400,10 @@ static int __init clk_disable_unused(void) unsigned long flags; list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || - ck->enable_reg == 0) + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || ck->enable_reg == 0) continue; spin_lock_irqsave(&clockfw_lock, flags); diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 4fe5084e..c1e4844 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -125,11 +125,13 @@ extern void clk_deny_idle(struct clk *clk); extern int clk_get_usecount(struct clk *clk); extern void clk_enable_init_clocks(void); +extern const struct clkops clkops_null; + /* Clock flags */ #define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ #define RATE_FIXED (1 << 1) /* Fixed clock rate */ #define RATE_PROPAGATES (1 << 2) /* Program children too */ -#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ +/* bits 3-4 are free */ #define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ #define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ #define CLOCK_IDLE_CONTROL (1 << 7) -- cgit v0.10.2 From 57137181e3136d4c7b20b4b95b9817efd38f8f07 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 16:48:35 +0000 Subject: [ARM] omap: kill PARENT_CONTROLS_CLOCK PARENT_CONTROLS_CLOCK just makes enable/disable no-op, and is functionally an alias for ALWAYS_ENABLED. This can be handled in the same way, using clkops_null. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index fa99c0b..21fbe29 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -271,9 +271,6 @@ int _omap2_clk_enable(struct clk *clk) { u32 regval32; - if (clk->flags & PARENT_CONTROLS_CLOCK) - return 0; - if (clk->ops && clk->ops->enable) return clk->ops->enable(clk); @@ -301,9 +298,6 @@ void _omap2_clk_disable(struct clk *clk) { u32 regval32; - if (clk->flags & PARENT_CONTROLS_CLOCK) - return; - if (clk->ops && clk->ops->disable) { clk->ops->disable(clk); return; diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index d486937..adc00e1 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -742,9 +742,10 @@ static const struct clksel func_54m_clksel[] = { static struct clk func_54m_ck = { .name = "func_54m_ck", + .ops = &clkops_null, .parent = &apll54_ck, /* can also be alt_clk */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -783,9 +784,10 @@ static const struct clksel func_96m_clksel[] = { /* The parent of this clock is not selectable on 2420. */ static struct clk func_96m_ck = { .name = "func_96m_ck", + .ops = &clkops_null, .parent = &apll96_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -816,9 +818,10 @@ static const struct clksel func_48m_clksel[] = { static struct clk func_48m_ck = { .name = "func_48m_ck", + .ops = &clkops_null, .parent = &apll96_ck, /* 96M or Alt */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -831,10 +834,11 @@ static struct clk func_48m_ck = { static struct clk func_12m_ck = { .name = "func_12m_ck", + .ops = &clkops_null, .parent = &func_48m_ck, .fixed_div = 4, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -917,9 +921,9 @@ static const struct clksel sys_clkout_clksel[] = { static struct clk sys_clkout = { .name = "sys_clkout", + .ops = &clkops_null, .parent = &sys_clkout_src, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, @@ -954,8 +958,9 @@ static const struct clksel sys_clkout2_clksel[] = { /* In 2430, new in 2420 ES2 */ static struct clk sys_clkout2 = { .name = "sys_clkout2", + .ops = &clkops_null, .parent = &sys_clkout2_src, - .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, @@ -1076,9 +1081,10 @@ static const struct clksel dsp_irate_ick_clksel[] = { /* This clock does not exist as such in the TRM. */ static struct clk dsp_irate_ick = { .name = "dsp_irate_ick", + .ops = &clkops_null, .parent = &dsp_fck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | - CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK, + CONFIG_PARTICIPANT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK, .clksel = dsp_irate_ick_clksel, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index b56fd28..203e2bd 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -295,9 +295,9 @@ static struct clk dpll1_ck = { */ static struct clk dpll1_x2_ck = { .name = "dpll1_x2_ck", + .ops = &clkops_null, .parent = &dpll1_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -313,13 +313,13 @@ static const struct clksel div16_dpll1_x2m2_clksel[] = { */ static struct clk dpll1_x2m2_ck = { .name = "dpll1_x2m2_ck", + .ops = &clkops_null, .parent = &dpll1_x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll1_x2m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -368,14 +368,14 @@ static const struct clksel div16_dpll2_m2x2_clksel[] = { */ static struct clk dpll2_m2_ck = { .name = "dpll2_m2_ck", + .ops = &clkops_null, .parent = &dpll2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll2_m2x2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -416,9 +416,9 @@ static struct clk dpll3_ck = { */ static struct clk dpll3_x2_ck = { .name = "dpll3_x2_ck", + .ops = &clkops_null, .parent = &dpll3_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -469,13 +469,13 @@ static const struct clksel div31_dpll3m2_clksel[] = { */ static struct clk dpll3_m2_ck = { .name = "dpll3_m2_ck", + .ops = &clkops_null, .parent = &dpll3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, .clksel = div31_dpll3m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -487,12 +487,12 @@ static const struct clksel core_ck_clksel[] = { static struct clk core_ck = { .name = "core_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = core_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -504,12 +504,12 @@ static const struct clksel dpll3_m2x2_ck_clksel[] = { static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = dpll3_m2x2_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -522,13 +522,13 @@ static const struct clksel div16_dpll3_clksel[] = { /* This virtual clock is the source for dpll3_m3x2_ck */ static struct clk dpll3_m3_ck = { .name = "dpll3_m3_ck", + .ops = &clkops_null, .parent = &dpll3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL3_MASK, .clksel = div16_dpll3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -550,13 +550,13 @@ static const struct clksel emu_core_alwon_ck_clksel[] = { static struct clk emu_core_alwon_ck = { .name = "emu_core_alwon_ck", + .ops = &clkops_null, .parent = &dpll3_m3x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = emu_core_alwon_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -599,9 +599,9 @@ static struct clk dpll4_ck = { */ static struct clk dpll4_x2_ck = { .name = "dpll4_x2_ck", + .ops = &clkops_null, .parent = &dpll4_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -613,13 +613,13 @@ static const struct clksel div16_dpll4_clksel[] = { /* This virtual clock is the source for dpll4_m2x2_ck */ static struct clk dpll4_m2_ck = { .name = "dpll4_m2_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), .clksel_mask = OMAP3430_DIV_96M_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -641,21 +641,21 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = { static struct clk omap_96m_alwon_fck = { .name = "omap_96m_alwon_fck", + .ops = &clkops_null, .parent = &dpll4_m2x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = omap_96m_alwon_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; static struct clk omap_96m_fck = { .name = "omap_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_alwon_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -667,26 +667,26 @@ static const struct clksel cm_96m_fck_clksel[] = { static struct clk cm_96m_fck = { .name = "cm_96m_fck", + .ops = &clkops_null, .parent = &dpll4_m2x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = cm_96m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; /* This virtual clock is the source for dpll4_m3x2_ck */ static struct clk dpll4_m3_ck = { .name = "dpll4_m3_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_TV_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -709,13 +709,13 @@ static const struct clksel virt_omap_54m_fck_clksel[] = { static struct clk virt_omap_54m_fck = { .name = "virt_omap_54m_fck", + .ops = &clkops_null, .parent = &dpll4_m3x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = virt_omap_54m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -737,12 +737,12 @@ static const struct clksel omap_54m_clksel[] = { static struct clk omap_54m_fck = { .name = "omap_54m_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_54M, .clksel = omap_54m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -764,34 +764,34 @@ static const struct clksel omap_48m_clksel[] = { static struct clk omap_48m_fck = { .name = "omap_48m_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_48M, .clksel = omap_48m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; static struct clk omap_12m_fck = { .name = "omap_12m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, .fixed_div = 4, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_fixed_divisor_recalc, }; /* This virstual clock is the source for dpll4_m4x2_ck */ static struct clk dpll4_m4_ck = { .name = "dpll4_m4_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -808,13 +808,13 @@ static struct clk dpll4_m4x2_ck = { /* This virtual clock is the source for dpll4_m5x2_ck */ static struct clk dpll4_m5_ck = { .name = "dpll4_m5_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -831,13 +831,13 @@ static struct clk dpll4_m5x2_ck = { /* This virtual clock is the source for dpll4_m6x2_ck */ static struct clk dpll4_m6_ck = { .name = "dpll4_m6_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL4_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -854,9 +854,9 @@ static struct clk dpll4_m6x2_ck = { static struct clk emu_per_alwon_ck = { .name = "emu_per_alwon_ck", + .ops = &clkops_null, .parent = &dpll4_m6x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -900,13 +900,13 @@ static const struct clksel div16_dpll5_clksel[] = { static struct clk dpll5_m2_ck = { .name = "dpll5_m2_ck", + .ops = &clkops_null, .parent = &dpll5_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), .clksel_mask = OMAP3430ES2_DIV_120M_MASK, .clksel = div16_dpll5_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -918,13 +918,13 @@ static const struct clksel omap_120m_fck_clksel[] = { static struct clk omap_120m_fck = { .name = "omap_120m_fck", + .ops = &clkops_null, .parent = &dpll5_m2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .clksel = omap_120m_fck_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -986,11 +986,12 @@ static const struct clksel sys_clkout2_clksel[] = { static struct clk sys_clkout2 = { .name = "sys_clkout2", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_clksel_recalc, }; @@ -998,9 +999,9 @@ static struct clk sys_clkout2 = { static struct clk corex2_fck = { .name = "corex2_fck", + .ops = &clkops_null, .parent = &dpll3_m2x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1017,13 +1018,13 @@ static const struct clksel div2_core_clksel[] = { */ static struct clk dpll1_fck = { .name = "dpll1_fck", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1041,13 +1042,13 @@ static const struct clksel mpu_clksel[] = { static struct clk mpu_ck = { .name = "mpu_ck", + .ops = &clkops_null, .parent = &dpll1_x2m2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = mpu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "mpu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1066,13 +1067,13 @@ static const struct clksel arm_fck_clksel[] = { static struct clk arm_fck = { .name = "arm_fck", + .ops = &clkops_null, .parent = &mpu_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = arm_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1084,21 +1085,21 @@ static struct clk arm_fck = { */ static struct clk emu_mpu_alwon_ck = { .name = "emu_mpu_alwon_ck", + .ops = &clkops_null, .parent = &mpu_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; static struct clk dpll2_fck = { .name = "dpll2_fck", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1134,13 +1135,13 @@ static struct clk iva2_ck = { static struct clk l3_ick = { .name = "l3_ick", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L3_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1152,13 +1153,13 @@ static const struct clksel div2_l3_clksel[] = { static struct clk l4_ick = { .name = "l4_ick", + .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L4_MASK, .clksel = div2_l3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1171,12 +1172,13 @@ static const struct clksel div2_l4_clksel[] = { static struct clk rm_ick = { .name = "rm_ick", + .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_RM_MASK, .clksel = div2_l4_clksel, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_clksel_recalc, }; @@ -1202,21 +1204,22 @@ static struct clk gfx_l3_ck = { static struct clk gfx_l3_fck = { .name = "gfx_l3_fck", + .ops = &clkops_null, .parent = &gfx_l3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", + .ops = &clkops_null, .parent = &gfx_l3_ck, - .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1365,9 +1368,9 @@ static struct clk usbtll_fck = { static struct clk core_96m_fck = { .name = "core_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1499,9 +1502,9 @@ static struct clk mcbsp1_fck = { static struct clk core_48m_fck = { .name = "core_48m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1577,9 +1580,9 @@ static struct clk fshostusb_fck = { static struct clk core_12m_fck = { .name = "core_12m_fck", + .ops = &clkops_null, .parent = &omap_12m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1625,9 +1628,10 @@ static struct clk ssi_ssr_fck = { static struct clk ssi_sst_fck = { .name = "ssi_sst_fck", + .ops = &clkops_null, .parent = &ssi_ssr_fck, .fixed_div = 2, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1641,10 +1645,10 @@ static struct clk ssi_sst_fck = { */ static struct clk core_l3_ick = { .name = "core_l3_ick", + .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1671,9 +1675,9 @@ static struct clk sdrc_ick = { static struct clk gpmc_fck = { .name = "gpmc_fck", + .ops = &clkops_null, .parent = &core_l3_ick, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK | - ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, /* huh? */ .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1682,9 +1686,9 @@ static struct clk gpmc_fck = { static struct clk security_l3_ick = { .name = "security_l3_ick", + .ops = &clkops_null, .parent = &l3_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1701,10 +1705,10 @@ static struct clk pka_ick = { static struct clk core_l4_ick = { .name = "core_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1984,9 +1988,9 @@ static struct clk omapctrl_ick = { static struct clk ssi_l4_ick = { .name = "ssi_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2028,9 +2032,9 @@ static struct clk usb_l4_ick = { static struct clk security_l4_ick2 = { .name = "security_l4_ick2", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2387,20 +2391,20 @@ static struct clk gpt1_ick = { static struct clk per_96m_fck = { .name = "per_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_alwon_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk per_48m_fck = { .name = "per_48m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2590,9 +2594,9 @@ static struct clk wdt3_fck = { static struct clk per_l4_ick = { .name = "per_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index c1e4844..40a2ac3 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -148,7 +148,6 @@ extern const struct clkops clkops_null; #define CLOCK_IN_OMAP242X (1 << 25) #define CLOCK_IN_OMAP243X (1 << 26) #define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -#define PARENT_CONTROLS_CLOCK (1 << 28) #define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ #define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ -- cgit v0.10.2 From b36ee724208358bd892ad279efce629740517149 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 17:59:52 +0000 Subject: [ARM] omap: add default .ops to all remaining OMAP2 clocks Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 21fbe29..8c09711 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -264,16 +264,10 @@ static void omap2_clk_wait_ready(struct clk *clk) omap2_wait_clock_ready(st_reg, bit, clk->name); } -/* Enables clock without considering parent dependencies or use count - * REVISIT: Maybe change this to use clk->enable like on omap1? - */ -int _omap2_clk_enable(struct clk *clk) +static int omap2_dflt_clk_enable_wait(struct clk *clk) { u32 regval32; - if (clk->ops && clk->ops->enable) - return clk->ops->enable(clk); - if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); @@ -293,16 +287,10 @@ int _omap2_clk_enable(struct clk *clk) return 0; } -/* Disables clock without considering parent dependencies or use count */ -void _omap2_clk_disable(struct clk *clk) +static void omap2_dflt_clk_disable(struct clk *clk) { u32 regval32; - if (clk->ops && clk->ops->disable) { - clk->ops->disable(clk); - return; - } - if (clk->enable_reg == NULL) { /* * 'Independent' here refers to a clock which is not @@ -322,6 +310,25 @@ void _omap2_clk_disable(struct clk *clk) wmb(); } +const struct clkops clkops_omap2_dflt_wait = { + .enable = omap2_dflt_clk_enable_wait, + .disable = omap2_dflt_clk_disable, +}; + +/* Enables clock without considering parent dependencies or use count + * REVISIT: Maybe change this to use clk->enable like on omap1? + */ +static int _omap2_clk_enable(struct clk *clk) +{ + return clk->ops->enable(clk); +} + +/* Disables clock without considering parent dependencies or use count */ +static void _omap2_clk_disable(struct clk *clk) +{ + clk->ops->disable(clk); +} + void omap2_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 1fb330e..d4bdb59 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -51,6 +51,8 @@ u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +extern const struct clkops clkops_omap2_dflt_wait; + extern u8 cpu_mask; /* clksel_rate data common to 24xx/343x */ diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index adc00e1..b59bf90 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -890,6 +890,7 @@ static const struct clksel common_clkout_src_clksel[] = { static struct clk sys_clkout_src = { .name = "sys_clkout_src", + .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, @@ -936,6 +937,7 @@ static struct clk sys_clkout = { /* In 2430, new in 2420 ES2 */ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", + .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", @@ -972,6 +974,7 @@ static struct clk sys_clkout2 = { static struct clk emul_ck = { .name = "emul_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", @@ -1051,6 +1054,7 @@ static const struct clksel dsp_fck_clksel[] = { static struct clk dsp_fck = { .name = "dsp_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, @@ -1096,6 +1100,7 @@ static struct clk dsp_irate_ick = { /* 2420 only */ static struct clk dsp_ick = { .name = "dsp_ick", /* apparently ipi and isp */ + .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN), @@ -1105,6 +1110,7 @@ static struct clk dsp_ick = { /* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */ static struct clk iva2_1_ick = { .name = "iva2_1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), @@ -1118,6 +1124,7 @@ static struct clk iva2_1_ick = { */ static struct clk iva1_ifck = { .name = "iva1_ifck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, @@ -1135,6 +1142,7 @@ static struct clk iva1_ifck = { /* IVA1 mpu/int/i/f clocks are /2 of parent */ static struct clk iva1_mpu_int_ifck = { .name = "iva1_mpu_int_ifck", + .ops = &clkops_omap2_dflt_wait, .parent = &iva1_ifck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "iva1_clkdm", @@ -1211,6 +1219,7 @@ static const struct clksel usb_l4_ick_clksel[] = { /* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, @@ -1284,6 +1293,7 @@ static const struct clksel ssi_ssr_sst_fck_clksel[] = { static struct clk ssi_ssr_sst_fck = { .name = "ssi_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, @@ -1320,6 +1330,7 @@ static const struct clksel gfx_fck_clksel[] = { static struct clk gfx_3d_fck = { .name = "gfx_3d_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", @@ -1335,6 +1346,7 @@ static struct clk gfx_3d_fck = { static struct clk gfx_2d_fck = { .name = "gfx_2d_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", @@ -1350,6 +1362,7 @@ static struct clk gfx_2d_fck = { static struct clk gfx_ick = { .name = "gfx_ick", /* From l3 */ + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", @@ -1380,6 +1393,7 @@ static const struct clksel mdm_ick_clksel[] = { static struct clk mdm_ick = { /* used both as a ick and fck */ .name = "mdm_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "mdm_clkdm", @@ -1395,6 +1409,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */ static struct clk mdm_osc_ck = { .name = "mdm_osc_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &osc_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "mdm_clkdm", @@ -1440,6 +1455,7 @@ static const struct clksel dss1_fck_clksel[] = { static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, /* really both l3 and l4 */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", @@ -1450,6 +1466,7 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ static struct clk dss1_fck = { .name = "dss1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, /* Core or sys */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, @@ -1483,6 +1500,7 @@ static const struct clksel dss2_fck_clksel[] = { static struct clk dss2_fck = { /* Alt clk used in power management */ .name = "dss2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, @@ -1498,6 +1516,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */ static struct clk dss_54m_fck = { /* Alt clk used in power management */ .name = "dss_54m_fck", /* 54m tv clk */ + .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", @@ -1526,6 +1545,7 @@ static const struct clksel omap24xx_gpt_clksel[] = { static struct clk gpt1_ick = { .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1536,6 +1556,7 @@ static struct clk gpt1_ick = { static struct clk gpt1_fck = { .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1552,6 +1573,7 @@ static struct clk gpt1_fck = { static struct clk gpt2_ick = { .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1562,6 +1584,7 @@ static struct clk gpt2_ick = { static struct clk gpt2_fck = { .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1576,6 +1599,7 @@ static struct clk gpt2_fck = { static struct clk gpt3_ick = { .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1586,6 +1610,7 @@ static struct clk gpt3_ick = { static struct clk gpt3_fck = { .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1600,6 +1625,7 @@ static struct clk gpt3_fck = { static struct clk gpt4_ick = { .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1610,6 +1636,7 @@ static struct clk gpt4_ick = { static struct clk gpt4_fck = { .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1624,6 +1651,7 @@ static struct clk gpt4_fck = { static struct clk gpt5_ick = { .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1634,6 +1662,7 @@ static struct clk gpt5_ick = { static struct clk gpt5_fck = { .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1648,6 +1677,7 @@ static struct clk gpt5_fck = { static struct clk gpt6_ick = { .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1658,6 +1688,7 @@ static struct clk gpt6_ick = { static struct clk gpt6_fck = { .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1672,6 +1703,7 @@ static struct clk gpt6_fck = { static struct clk gpt7_ick = { .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1681,6 +1713,7 @@ static struct clk gpt7_ick = { static struct clk gpt7_fck = { .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1695,6 +1728,7 @@ static struct clk gpt7_fck = { static struct clk gpt8_ick = { .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1705,6 +1739,7 @@ static struct clk gpt8_ick = { static struct clk gpt8_fck = { .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1719,6 +1754,7 @@ static struct clk gpt8_fck = { static struct clk gpt9_ick = { .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1729,6 +1765,7 @@ static struct clk gpt9_ick = { static struct clk gpt9_fck = { .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1743,6 +1780,7 @@ static struct clk gpt9_fck = { static struct clk gpt10_ick = { .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1753,6 +1791,7 @@ static struct clk gpt10_ick = { static struct clk gpt10_fck = { .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1767,6 +1806,7 @@ static struct clk gpt10_fck = { static struct clk gpt11_ick = { .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1777,6 +1817,7 @@ static struct clk gpt11_ick = { static struct clk gpt11_fck = { .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1791,6 +1832,7 @@ static struct clk gpt11_fck = { static struct clk gpt12_ick = { .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1801,6 +1843,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -1815,6 +1858,7 @@ static struct clk gpt12_fck = { static struct clk mcbsp1_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1826,6 +1870,7 @@ static struct clk mcbsp1_ick = { static struct clk mcbsp1_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1837,6 +1882,7 @@ static struct clk mcbsp1_fck = { static struct clk mcbsp2_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1848,6 +1894,7 @@ static struct clk mcbsp2_ick = { static struct clk mcbsp2_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1859,6 +1906,7 @@ static struct clk mcbsp2_fck = { static struct clk mcbsp3_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, @@ -1870,6 +1918,7 @@ static struct clk mcbsp3_ick = { static struct clk mcbsp3_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -1881,6 +1930,7 @@ static struct clk mcbsp3_fck = { static struct clk mcbsp4_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, @@ -1892,6 +1942,7 @@ static struct clk mcbsp4_ick = { static struct clk mcbsp4_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -1903,6 +1954,7 @@ static struct clk mcbsp4_fck = { static struct clk mcbsp5_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, @@ -1914,6 +1966,7 @@ static struct clk mcbsp5_ick = { static struct clk mcbsp5_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -1925,6 +1978,7 @@ static struct clk mcbsp5_fck = { static struct clk mcspi1_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, .clkdm_name = "core_l4_clkdm", @@ -1936,6 +1990,7 @@ static struct clk mcspi1_ick = { static struct clk mcspi1_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1947,6 +2002,7 @@ static struct clk mcspi1_fck = { static struct clk mcspi2_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1958,6 +2014,7 @@ static struct clk mcspi2_ick = { static struct clk mcspi2_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -1969,6 +2026,7 @@ static struct clk mcspi2_fck = { static struct clk mcspi3_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, @@ -1980,6 +2038,7 @@ static struct clk mcspi3_ick = { static struct clk mcspi3_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, @@ -1991,6 +2050,7 @@ static struct clk mcspi3_fck = { static struct clk uart1_ick = { .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2001,6 +2061,7 @@ static struct clk uart1_ick = { static struct clk uart1_fck = { .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2011,6 +2072,7 @@ static struct clk uart1_fck = { static struct clk uart2_ick = { .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2021,6 +2083,7 @@ static struct clk uart2_ick = { static struct clk uart2_fck = { .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2031,6 +2094,7 @@ static struct clk uart2_fck = { static struct clk uart3_ick = { .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2041,6 +2105,7 @@ static struct clk uart3_ick = { static struct clk uart3_fck = { .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2051,6 +2116,7 @@ static struct clk uart3_fck = { static struct clk gpios_ick = { .name = "gpios_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2061,6 +2127,7 @@ static struct clk gpios_ick = { static struct clk gpios_fck = { .name = "gpios_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", @@ -2071,6 +2138,7 @@ static struct clk gpios_fck = { static struct clk mpu_wdt_ick = { .name = "mpu_wdt_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2081,6 +2149,7 @@ static struct clk mpu_wdt_ick = { static struct clk mpu_wdt_fck = { .name = "mpu_wdt_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", @@ -2091,6 +2160,7 @@ static struct clk mpu_wdt_fck = { static struct clk sync_32k_ick = { .name = "sync_32k_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, @@ -2102,6 +2172,7 @@ static struct clk sync_32k_ick = { static struct clk wdt1_ick = { .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2112,6 +2183,7 @@ static struct clk wdt1_ick = { static struct clk omapctrl_ick = { .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, @@ -2123,6 +2195,7 @@ static struct clk omapctrl_ick = { static struct clk icr_ick = { .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2133,6 +2206,7 @@ static struct clk icr_ick = { static struct clk cam_ick = { .name = "cam_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2148,6 +2222,7 @@ static struct clk cam_ick = { */ static struct clk cam_fck = { .name = "cam_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", @@ -2158,6 +2233,7 @@ static struct clk cam_fck = { static struct clk mailboxes_ick = { .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2168,6 +2244,7 @@ static struct clk mailboxes_ick = { static struct clk wdt4_ick = { .name = "wdt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2178,6 +2255,7 @@ static struct clk wdt4_ick = { static struct clk wdt4_fck = { .name = "wdt4_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2188,6 +2266,7 @@ static struct clk wdt4_fck = { static struct clk wdt3_ick = { .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2198,6 +2277,7 @@ static struct clk wdt3_ick = { static struct clk wdt3_fck = { .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2208,6 +2288,7 @@ static struct clk wdt3_fck = { static struct clk mspro_ick = { .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2218,6 +2299,7 @@ static struct clk mspro_ick = { static struct clk mspro_fck = { .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2228,6 +2310,7 @@ static struct clk mspro_fck = { static struct clk mmc_ick = { .name = "mmc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2238,6 +2321,7 @@ static struct clk mmc_ick = { static struct clk mmc_fck = { .name = "mmc_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2248,6 +2332,7 @@ static struct clk mmc_fck = { static struct clk fac_ick = { .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2258,6 +2343,7 @@ static struct clk fac_ick = { static struct clk fac_fck = { .name = "fac_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2268,6 +2354,7 @@ static struct clk fac_fck = { static struct clk eac_ick = { .name = "eac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2278,6 +2365,7 @@ static struct clk eac_ick = { static struct clk eac_fck = { .name = "eac_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2288,6 +2376,7 @@ static struct clk eac_fck = { static struct clk hdq_ick = { .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2298,6 +2387,7 @@ static struct clk hdq_ick = { static struct clk hdq_fck = { .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2308,6 +2398,7 @@ static struct clk hdq_fck = { static struct clk i2c2_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -2319,6 +2410,7 @@ static struct clk i2c2_ick = { static struct clk i2c2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, @@ -2330,6 +2422,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -2341,6 +2434,7 @@ static struct clk i2chs2_fck = { static struct clk i2c1_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, @@ -2352,6 +2446,7 @@ static struct clk i2c1_ick = { static struct clk i2c1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, @@ -2363,6 +2458,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -2402,6 +2498,7 @@ static struct clk sdma_ick = { static struct clk vlynq_ick = { .name = "vlynq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", @@ -2437,6 +2534,7 @@ static const struct clksel vlynq_fck_clksel[] = { static struct clk vlynq_fck = { .name = "vlynq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | DELAYED_APP, .clkdm_name = "core_l3_clkdm", @@ -2453,6 +2551,7 @@ static struct clk vlynq_fck = { static struct clk sdrc_ick = { .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", @@ -2463,6 +2562,7 @@ static struct clk sdrc_ick = { static struct clk des_ick = { .name = "des_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2473,6 +2573,7 @@ static struct clk des_ick = { static struct clk sha_ick = { .name = "sha_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2483,6 +2584,7 @@ static struct clk sha_ick = { static struct clk rng_ick = { .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2493,6 +2595,7 @@ static struct clk rng_ick = { static struct clk aes_ick = { .name = "aes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2503,6 +2606,7 @@ static struct clk aes_ick = { static struct clk pka_ick = { .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", @@ -2513,6 +2617,7 @@ static struct clk pka_ick = { static struct clk usb_fck = { .name = "usb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", @@ -2523,6 +2628,7 @@ static struct clk usb_fck = { static struct clk usbhs_ick = { .name = "usbhs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", @@ -2533,6 +2639,7 @@ static struct clk usbhs_ick = { static struct clk mmchs1_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2543,6 +2650,7 @@ static struct clk mmchs1_ick = { static struct clk mmchs1_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", @@ -2553,6 +2661,7 @@ static struct clk mmchs1_fck = { static struct clk mmchs2_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, @@ -2564,6 +2673,7 @@ static struct clk mmchs2_ick = { static struct clk mmchs2_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, @@ -2574,6 +2684,7 @@ static struct clk mmchs2_fck = { static struct clk gpio5_ick = { .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2584,6 +2695,7 @@ static struct clk gpio5_ick = { static struct clk gpio5_fck = { .name = "gpio5_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2594,6 +2706,7 @@ static struct clk gpio5_fck = { static struct clk mdm_intc_ick = { .name = "mdm_intc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2604,6 +2717,7 @@ static struct clk mdm_intc_ick = { static struct clk mmchsdb1_fck = { .name = "mmchsdb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2614,6 +2728,7 @@ static struct clk mmchsdb1_fck = { static struct clk mmchsdb2_fck = { .name = "mmchsdb_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 203e2bd..0d6a11c 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -216,6 +216,7 @@ static struct clk mcbsp_clks = { static struct clk sys_clkout1 = { .name = "sys_clkout1", + .ops = &clkops_omap2_dflt_wait, .parent = &osc_sys_ck, .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, @@ -535,6 +536,7 @@ static struct clk dpll3_m3_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll3_m3x2_ck = { .name = "dpll3_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll3_m3_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, @@ -626,6 +628,7 @@ static struct clk dpll4_m2_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m2x2_ck = { .name = "dpll4_m2x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m2_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_96M_SHIFT, @@ -693,6 +696,7 @@ static struct clk dpll4_m3_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m3x2_ck = { .name = "dpll4_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m3_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), @@ -798,6 +802,7 @@ static struct clk dpll4_m4_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m4x2_ck = { .name = "dpll4_m4x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, @@ -821,6 +826,7 @@ static struct clk dpll4_m5_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m5x2_ck = { .name = "dpll4_m5x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m5_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, @@ -844,6 +850,7 @@ static struct clk dpll4_m6_ck = { /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m6x2_ck = { .name = "dpll4_m6x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m6_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), @@ -960,6 +967,7 @@ static const struct clksel clkout2_src_clksel[] = { static struct clk clkout2_src_ck = { .name = "clkout2_src_ck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP3430_CM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, @@ -1118,6 +1126,7 @@ static const struct clksel iva2_clksel[] = { static struct clk iva2_ck = { .name = "iva2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll2_m2_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), @@ -1194,6 +1203,7 @@ static const struct clksel gfx_l3_clksel[] = { /* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ static struct clk gfx_l3_ck = { .name = "gfx_l3_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &l3_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), @@ -1226,6 +1236,7 @@ static struct clk gfx_l3_ick = { static struct clk gfx_cg1_ck = { .name = "gfx_cg1_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &gfx_l3_fck, /* REVISIT: correct? */ .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), @@ -1237,6 +1248,7 @@ static struct clk gfx_cg1_ck = { static struct clk gfx_cg2_ck = { .name = "gfx_cg2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &gfx_l3_fck, /* REVISIT: correct? */ .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), @@ -1268,6 +1280,7 @@ static const struct clksel sgx_clksel[] = { static struct clk sgx_fck = { .name = "sgx_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, @@ -1281,6 +1294,7 @@ static struct clk sgx_fck = { static struct clk sgx_ick = { .name = "sgx_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), @@ -1294,6 +1308,7 @@ static struct clk sgx_ick = { static struct clk d2d_26m_fck = { .name = "d2d_26m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1311,6 +1326,7 @@ static const struct clksel omap343x_gpt_clksel[] = { static struct clk gpt10_fck = { .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1325,6 +1341,7 @@ static struct clk gpt10_fck = { static struct clk gpt11_fck = { .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1339,6 +1356,7 @@ static struct clk gpt11_fck = { static struct clk cpefuse_fck = { .name = "cpefuse_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, @@ -1348,6 +1366,7 @@ static struct clk cpefuse_fck = { static struct clk ts_fck = { .name = "ts_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_32k_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, @@ -1357,6 +1376,7 @@ static struct clk ts_fck = { static struct clk usbtll_fck = { .name = "usbtll_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_120m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, @@ -1377,6 +1397,7 @@ static struct clk core_96m_fck = { static struct clk mmchs3_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1388,6 +1409,7 @@ static struct clk mmchs3_fck = { static struct clk mmchs2_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1399,6 +1421,7 @@ static struct clk mmchs2_fck = { static struct clk mspro_fck = { .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, @@ -1409,6 +1432,7 @@ static struct clk mspro_fck = { static struct clk mmchs1_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, @@ -1419,6 +1443,7 @@ static struct clk mmchs1_fck = { static struct clk i2c3_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1430,6 +1455,7 @@ static struct clk i2c3_fck = { static struct clk i2c2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1441,6 +1467,7 @@ static struct clk i2c2_fck = { static struct clk i2c1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1472,6 +1499,7 @@ static const struct clksel mcbsp_15_clksel[] = { static struct clk mcbsp5_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 5, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1486,6 +1514,7 @@ static struct clk mcbsp5_fck = { static struct clk mcbsp1_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1511,6 +1540,7 @@ static struct clk core_48m_fck = { static struct clk mcspi4_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1521,6 +1551,7 @@ static struct clk mcspi4_fck = { static struct clk mcspi3_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1531,6 +1562,7 @@ static struct clk mcspi3_fck = { static struct clk mcspi2_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1541,6 +1573,7 @@ static struct clk mcspi2_fck = { static struct clk mcspi1_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1551,6 +1584,7 @@ static struct clk mcspi1_fck = { static struct clk uart2_fck = { .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, @@ -1560,6 +1594,7 @@ static struct clk uart2_fck = { static struct clk uart1_fck = { .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, @@ -1569,6 +1604,7 @@ static struct clk uart1_fck = { static struct clk fshostusb_fck = { .name = "fshostusb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, @@ -1589,6 +1625,7 @@ static struct clk core_12m_fck = { static struct clk hdq_fck = { .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_12m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, @@ -1615,6 +1652,7 @@ static const struct clksel ssi_ssr_clksel[] = { static struct clk ssi_ssr_fck = { .name = "ssi_ssr_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, @@ -1655,6 +1693,7 @@ static struct clk core_l3_ick = { static struct clk hsotgusb_ick = { .name = "hsotgusb_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1665,6 +1704,7 @@ static struct clk hsotgusb_ick = { static struct clk sdrc_ick = { .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SDRC_SHIFT, @@ -1694,6 +1734,7 @@ static struct clk security_l3_ick = { static struct clk pka_ick = { .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_PKA_SHIFT, @@ -1715,6 +1756,7 @@ static struct clk core_l4_ick = { static struct clk usbtll_ick = { .name = "usbtll_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, @@ -1725,6 +1767,7 @@ static struct clk usbtll_ick = { static struct clk mmchs3_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1737,6 +1780,7 @@ static struct clk mmchs3_ick = { /* Intersystem Communication Registers - chassis mode only */ static struct clk icr_ick = { .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_ICR_SHIFT, @@ -1747,6 +1791,7 @@ static struct clk icr_ick = { static struct clk aes2_ick = { .name = "aes2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_AES2_SHIFT, @@ -1757,6 +1802,7 @@ static struct clk aes2_ick = { static struct clk sha12_ick = { .name = "sha12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SHA12_SHIFT, @@ -1767,6 +1813,7 @@ static struct clk sha12_ick = { static struct clk des2_ick = { .name = "des2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_DES2_SHIFT, @@ -1777,6 +1824,7 @@ static struct clk des2_ick = { static struct clk mmchs2_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1788,6 +1836,7 @@ static struct clk mmchs2_ick = { static struct clk mmchs1_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, @@ -1798,6 +1847,7 @@ static struct clk mmchs1_ick = { static struct clk mspro_ick = { .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, @@ -1808,6 +1858,7 @@ static struct clk mspro_ick = { static struct clk hdq_ick = { .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, @@ -1818,6 +1869,7 @@ static struct clk hdq_ick = { static struct clk mcspi4_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1829,6 +1881,7 @@ static struct clk mcspi4_ick = { static struct clk mcspi3_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1840,6 +1893,7 @@ static struct clk mcspi3_ick = { static struct clk mcspi2_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1851,6 +1905,7 @@ static struct clk mcspi2_ick = { static struct clk mcspi1_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1862,6 +1917,7 @@ static struct clk mcspi1_ick = { static struct clk i2c3_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1873,6 +1929,7 @@ static struct clk i2c3_ick = { static struct clk i2c2_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1884,6 +1941,7 @@ static struct clk i2c2_ick = { static struct clk i2c1_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1895,6 +1953,7 @@ static struct clk i2c1_ick = { static struct clk uart2_ick = { .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, @@ -1905,6 +1964,7 @@ static struct clk uart2_ick = { static struct clk uart1_ick = { .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, @@ -1915,6 +1975,7 @@ static struct clk uart1_ick = { static struct clk gpt11_ick = { .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT11_SHIFT, @@ -1925,6 +1986,7 @@ static struct clk gpt11_ick = { static struct clk gpt10_ick = { .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT10_SHIFT, @@ -1935,6 +1997,7 @@ static struct clk gpt10_ick = { static struct clk mcbsp5_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1946,6 +2009,7 @@ static struct clk mcbsp5_ick = { static struct clk mcbsp1_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -1957,6 +2021,7 @@ static struct clk mcbsp1_ick = { static struct clk fac_ick = { .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, @@ -1967,6 +2032,7 @@ static struct clk fac_ick = { static struct clk mailboxes_ick = { .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, @@ -1977,6 +2043,7 @@ static struct clk mailboxes_ick = { static struct clk omapctrl_ick = { .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, @@ -1997,6 +2064,7 @@ static struct clk ssi_l4_ick = { static struct clk ssi_ick = { .name = "ssi_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &ssi_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, @@ -2015,6 +2083,7 @@ static const struct clksel usb_l4_clksel[] = { static struct clk usb_l4_ick = { .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -2040,6 +2109,7 @@ static struct clk security_l4_ick2 = { static struct clk aes1_ick = { .name = "aes1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_AES1_SHIFT, @@ -2049,6 +2119,7 @@ static struct clk aes1_ick = { static struct clk rng_ick = { .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_RNG_SHIFT, @@ -2058,6 +2129,7 @@ static struct clk rng_ick = { static struct clk sha11_ick = { .name = "sha11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_SHA11_SHIFT, @@ -2067,6 +2139,7 @@ static struct clk sha11_ick = { static struct clk des1_ick = { .name = "des1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_DES1_SHIFT, @@ -2083,6 +2156,7 @@ static const struct clksel dss1_alwon_fck_clksel[] = { static struct clk dss1_alwon_fck = { .name = "dss1_alwon_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4x2_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2097,6 +2171,7 @@ static struct clk dss1_alwon_fck = { static struct clk dss_tv_fck = { .name = "dss_tv_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_54m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2108,6 +2183,7 @@ static struct clk dss_tv_fck = { static struct clk dss_96m_fck = { .name = "dss_96m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2119,6 +2195,7 @@ static struct clk dss_96m_fck = { static struct clk dss2_alwon_fck = { .name = "dss2_alwon_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2131,6 +2208,7 @@ static struct clk dss2_alwon_fck = { static struct clk dss_ick = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), @@ -2150,6 +2228,7 @@ static const struct clksel cam_mclk_clksel[] = { static struct clk cam_mclk = { .name = "cam_mclk", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m5x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), @@ -2165,6 +2244,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2178,6 +2258,7 @@ static struct clk cam_ick = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_120m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2189,6 +2270,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2201,6 +2283,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), @@ -2212,6 +2295,7 @@ static struct clk usbhost_ick = { static struct clk usbhost_sar_fck = { .name = "usbhost_sar_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &osc_sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), @@ -2249,6 +2333,7 @@ static const struct clksel usim_clksel[] = { /* 3430ES2 only */ static struct clk usim_fck = { .name = "usim_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, @@ -2262,6 +2347,7 @@ static struct clk usim_fck = { /* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ static struct clk gpt1_fck = { .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, @@ -2285,6 +2371,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2295,6 +2382,7 @@ static struct clk gpio1_dbck = { static struct clk wdt2_fck = { .name = "wdt2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, @@ -2316,6 +2404,7 @@ static struct clk wkup_l4_ick = { /* Never specifically named in the TRM, so we have to infer a likely name */ static struct clk usim_ick = { .name = "usim_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, @@ -2326,6 +2415,7 @@ static struct clk usim_ick = { static struct clk wdt2_ick = { .name = "wdt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, @@ -2336,6 +2426,7 @@ static struct clk wdt2_ick = { static struct clk wdt1_ick = { .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT1_SHIFT, @@ -2346,6 +2437,7 @@ static struct clk wdt1_ick = { static struct clk gpio1_ick = { .name = "gpio1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2356,6 +2448,7 @@ static struct clk gpio1_ick = { static struct clk omap_32ksync_ick = { .name = "omap_32ksync_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, @@ -2367,6 +2460,7 @@ static struct clk omap_32ksync_ick = { /* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_ick = { .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT12_SHIFT, @@ -2377,6 +2471,7 @@ static struct clk gpt12_ick = { static struct clk gpt1_ick = { .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, @@ -2411,6 +2506,7 @@ static struct clk per_48m_fck = { static struct clk uart3_fck = { .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_48m_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, @@ -2421,6 +2517,7 @@ static struct clk uart3_fck = { static struct clk gpt2_fck = { .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, @@ -2434,6 +2531,7 @@ static struct clk gpt2_fck = { static struct clk gpt3_fck = { .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, @@ -2447,6 +2545,7 @@ static struct clk gpt3_fck = { static struct clk gpt4_fck = { .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, @@ -2460,6 +2559,7 @@ static struct clk gpt4_fck = { static struct clk gpt5_fck = { .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, @@ -2473,6 +2573,7 @@ static struct clk gpt5_fck = { static struct clk gpt6_fck = { .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, @@ -2486,6 +2587,7 @@ static struct clk gpt6_fck = { static struct clk gpt7_fck = { .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, @@ -2499,6 +2601,7 @@ static struct clk gpt7_fck = { static struct clk gpt8_fck = { .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, @@ -2512,6 +2615,7 @@ static struct clk gpt8_fck = { static struct clk gpt9_fck = { .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, @@ -2534,6 +2638,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2544,6 +2649,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2554,6 +2660,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2564,6 +2671,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2574,6 +2682,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, @@ -2584,6 +2693,7 @@ static struct clk gpio2_dbck = { static struct clk wdt3_fck = { .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, @@ -2603,6 +2713,7 @@ static struct clk per_l4_ick = { static struct clk gpio6_ick = { .name = "gpio6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2613,6 +2724,7 @@ static struct clk gpio6_ick = { static struct clk gpio5_ick = { .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2623,6 +2735,7 @@ static struct clk gpio5_ick = { static struct clk gpio4_ick = { .name = "gpio4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2633,6 +2746,7 @@ static struct clk gpio4_ick = { static struct clk gpio3_ick = { .name = "gpio3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2643,6 +2757,7 @@ static struct clk gpio3_ick = { static struct clk gpio2_ick = { .name = "gpio2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, @@ -2653,6 +2768,7 @@ static struct clk gpio2_ick = { static struct clk wdt3_ick = { .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, @@ -2663,6 +2779,7 @@ static struct clk wdt3_ick = { static struct clk uart3_ick = { .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, @@ -2673,6 +2790,7 @@ static struct clk uart3_ick = { static struct clk gpt9_ick = { .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, @@ -2683,6 +2801,7 @@ static struct clk gpt9_ick = { static struct clk gpt8_ick = { .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, @@ -2693,6 +2812,7 @@ static struct clk gpt8_ick = { static struct clk gpt7_ick = { .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, @@ -2703,6 +2823,7 @@ static struct clk gpt7_ick = { static struct clk gpt6_ick = { .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, @@ -2713,6 +2834,7 @@ static struct clk gpt6_ick = { static struct clk gpt5_ick = { .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, @@ -2723,6 +2845,7 @@ static struct clk gpt5_ick = { static struct clk gpt4_ick = { .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, @@ -2733,6 +2856,7 @@ static struct clk gpt4_ick = { static struct clk gpt3_ick = { .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, @@ -2743,6 +2867,7 @@ static struct clk gpt3_ick = { static struct clk gpt2_ick = { .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, @@ -2753,6 +2878,7 @@ static struct clk gpt2_ick = { static struct clk mcbsp2_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), @@ -2764,6 +2890,7 @@ static struct clk mcbsp2_ick = { static struct clk mcbsp3_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), @@ -2775,6 +2902,7 @@ static struct clk mcbsp3_ick = { static struct clk mcbsp4_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), @@ -2792,6 +2920,7 @@ static const struct clksel mcbsp_234_clksel[] = { static struct clk mcbsp2_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2806,6 +2935,7 @@ static struct clk mcbsp2_fck = { static struct clk mcbsp3_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2820,6 +2950,7 @@ static struct clk mcbsp3_fck = { static struct clk mcbsp4_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2988,6 +3119,7 @@ static struct clk traceclk_fck = { /* SmartReflex fclk (VDD1) */ static struct clk sr1_fck = { .name = "sr1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR1_SHIFT, @@ -2998,6 +3130,7 @@ static struct clk sr1_fck = { /* SmartReflex fclk (VDD2) */ static struct clk sr2_fck = { .name = "sr2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR2_SHIFT, -- cgit v0.10.2 From bc51da4ee46d481dc3fbc57ec407594b80e92705 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 18:59:32 +0000 Subject: [ARM] omap: eliminate unnecessary conditionals in omap2_clk_wait_ready Rather than employing run-time tests in omap2_clk_wait_ready() to decide whether we need to wait for the clock to become ready, we can set the .ops appropriately. This change deals with the OMAP24xx and OMAP34xx conditionals only. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 8c09711..986c9f5 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -237,23 +237,6 @@ static void omap2_clk_wait_ready(struct clk *clk) else return; - /* REVISIT: What are the appropriate exclusions for 34XX? */ - /* No check for DSS or cam clocks */ - if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */ - if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT || - clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT || - clk->enable_bit == OMAP24XX_EN_CAM_SHIFT) - return; - } - - /* REVISIT: What are the appropriate exclusions for 34XX? */ - /* OMAP3: ignore DSS-mod clocks */ - if (cpu_is_omap34xx() && - (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) || - ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) && - clk->enable_bit == OMAP3430_EN_SSI_SHIFT))) - return; - /* Check if both functional and interface clocks * are running. */ bit = 1 << clk->enable_bit; @@ -264,7 +247,7 @@ static void omap2_clk_wait_ready(struct clk *clk) omap2_wait_clock_ready(st_reg, bit, clk->name); } -static int omap2_dflt_clk_enable_wait(struct clk *clk) +static int omap2_dflt_clk_enable(struct clk *clk) { u32 regval32; @@ -282,11 +265,25 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk) __raw_writel(regval32, clk->enable_reg); wmb(); - omap2_clk_wait_ready(clk); - return 0; } +static int omap2_dflt_clk_enable_wait(struct clk *clk) +{ + int ret; + + if (unlikely(clk->enable_reg == NULL)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; /* REVISIT: -EINVAL */ + } + + ret = omap2_dflt_clk_enable(clk); + if (ret == 0) + omap2_clk_wait_ready(clk); + return ret; +} + static void omap2_dflt_clk_disable(struct clk *clk) { u32 regval32; @@ -315,6 +312,11 @@ const struct clkops clkops_omap2_dflt_wait = { .disable = omap2_dflt_clk_disable, }; +const struct clkops clkops_omap2_dflt = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, +}; + /* Enables clock without considering parent dependencies or use count * REVISIT: Maybe change this to use clk->enable like on omap1? */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index d4bdb59..b0358b6 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -52,6 +52,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); extern const struct clkops clkops_omap2_dflt_wait; +extern const struct clkops clkops_omap2_dflt; extern u8 cpu_mask; diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index b59bf90..d386b3d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -1455,7 +1455,7 @@ static const struct clksel dss1_fck_clksel[] = { static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ck, /* really both l3 and l4 */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", @@ -1466,7 +1466,7 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ static struct clk dss1_fck = { .name = "dss1_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_ck, /* Core or sys */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, @@ -1500,7 +1500,7 @@ static const struct clksel dss2_fck_clksel[] = { static struct clk dss2_fck = { /* Alt clk used in power management */ .name = "dss2_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, @@ -2206,7 +2206,7 @@ static struct clk icr_ick = { static struct clk cam_ick = { .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", @@ -2222,7 +2222,7 @@ static struct clk cam_ick = { */ static struct clk cam_fck = { .name = "cam_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 0d6a11c..1ff05d3 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1652,7 +1652,7 @@ static const struct clksel ssi_ssr_clksel[] = { static struct clk ssi_ssr_fck = { .name = "ssi_ssr_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, @@ -2064,7 +2064,7 @@ static struct clk ssi_l4_ick = { static struct clk ssi_ick = { .name = "ssi_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, @@ -2156,7 +2156,7 @@ static const struct clksel dss1_alwon_fck_clksel[] = { static struct clk dss1_alwon_fck = { .name = "dss1_alwon_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2171,7 +2171,7 @@ static struct clk dss1_alwon_fck = { static struct clk dss_tv_fck = { .name = "dss_tv_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &omap_54m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2183,7 +2183,7 @@ static struct clk dss_tv_fck = { static struct clk dss_96m_fck = { .name = "dss_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &omap_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2195,7 +2195,7 @@ static struct clk dss_96m_fck = { static struct clk dss2_alwon_fck = { .name = "dss2_alwon_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), @@ -2208,7 +2208,7 @@ static struct clk dss2_alwon_fck = { static struct clk dss_ick = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), -- cgit v0.10.2 From c1168dc31d8e0688168030ac66341897ed7ca32a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 21:24:00 +0000 Subject: [ARM] omap: don't use clkops_omap2_dflt_wait for non-ICLK/FCLK clocks The original code in omap2_clk_wait_ready() used to check the low 8 bits to determine whether they were within the FCLKEN or ICLKEN registers. Specifically, the test is satisfied when these offsets are used: CM_FCLKEN, CM_FCLKEN1, CM_CLKEN, OMAP24XX_CM_FCLKEN2, CM_ICLKEN, CM_ICLKEN1, CM_ICLKEN2, CM_ICLKEN3, OMAP24XX_CM_ICLKEN4 OMAP3430_CM_CLKEN_PLL, OMAP3430ES2_CM_CLKEN2 If one of these offsets isn't used, omap2_clk_wait_ready() merely returns without doing anything. So we should use the non-wait clkops version instead and eliminate that conditional. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 986c9f5..76afb7b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -228,14 +228,12 @@ static void omap2_clk_wait_ready(struct clk *clk) * it and pull it into struct clk itself somehow. */ reg = clk->enable_reg; - if ((((u32)reg & 0xff) >= CM_FCLKEN1) && - (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2)) - other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */ - else if ((((u32)reg & 0xff) >= CM_ICLKEN1) && - (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4)) - other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */ - else - return; + + /* + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. + */ + other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); /* Check if both functional and interface clocks * are running. */ diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index d386b3d..486fd80 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -890,7 +890,7 @@ static const struct clksel common_clkout_src_clksel[] = { static struct clk sys_clkout_src = { .name = "sys_clkout_src", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, @@ -937,7 +937,7 @@ static struct clk sys_clkout = { /* In 2430, new in 2420 ES2 */ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", @@ -974,7 +974,7 @@ static struct clk sys_clkout2 = { static struct clk emul_ck = { .name = "emul_ck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 1ff05d3..335ef88 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -216,7 +216,7 @@ static struct clk mcbsp_clks = { static struct clk sys_clkout1 = { .name = "sys_clkout1", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &osc_sys_ck, .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, @@ -967,7 +967,7 @@ static const struct clksel clkout2_src_clksel[] = { static struct clk clkout2_src_ck = { .name = "clkout2_src_ck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, .enable_reg = OMAP3430_CM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, @@ -1356,7 +1356,7 @@ static struct clk gpt11_fck = { static struct clk cpefuse_fck = { .name = "cpefuse_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, @@ -1366,7 +1366,7 @@ static struct clk cpefuse_fck = { static struct clk ts_fck = { .name = "ts_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, @@ -1376,7 +1376,7 @@ static struct clk ts_fck = { static struct clk usbtll_fck = { .name = "usbtll_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &omap_120m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, @@ -2295,7 +2295,7 @@ static struct clk usbhost_ick = { static struct clk usbhost_sar_fck = { .name = "usbhost_sar_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &osc_sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), -- cgit v0.10.2 From eee5b19119458cd399ce4deaabea07c8d07159ae Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 21:42:54 +0000 Subject: [ARM] omap: remove clk->owner clk->owner is always NULL, so its existence doesn't serve any useful function other than bloating the kernel by 992 bytes. Remove it. Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 529c4a9..c53205c 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -53,15 +53,14 @@ struct clk * clk_get(struct device *dev, const char *id) mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + if (p->id == idno && strcmp(id, p->name) == 0) { clk = p; goto found; } } list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + if (strcmp(id, p->name) == 0) { clk = p; break; } @@ -148,8 +147,6 @@ EXPORT_SYMBOL(clk_get_rate); void clk_put(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); } EXPORT_SYMBOL(clk_put); diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 40a2ac3..547619f 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -65,7 +65,6 @@ struct dpll_data { struct clk { struct list_head node; const struct clkops *ops; - struct module *owner; const char *name; int id; struct clk *parent; -- cgit v0.10.2 From ebb8dca2957f3bb79eea8eec0c7d1c8c3fa9a5be Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 21:50:46 +0000 Subject: [ARM] omap: rearrange clock.h structure order ... to eliminate unnecessary padding. We have rather a lot of these structures, so eliminating unnecessary padding results in a saving of 1488 bytes. Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 547619f..6c24835 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -25,8 +25,8 @@ struct clkops { #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) struct clksel_rate { - u8 div; u32 val; + u8 div; u8 flags; }; @@ -39,23 +39,23 @@ struct dpll_data { void __iomem *mult_div1_reg; u32 mult_mask; u32 div1_mask; + unsigned int rate_tolerance; + unsigned long last_rounded_rate; u16 last_rounded_m; u8 last_rounded_n; - unsigned long last_rounded_rate; - unsigned int rate_tolerance; - u16 max_multiplier; u8 max_divider; u32 max_tolerance; + u16 max_multiplier; # if defined(CONFIG_ARCH_OMAP3) u8 modes; void __iomem *control_reg; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; u32 enable_mask; + u32 autoidle_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - void __iomem *autoidle_reg; - u32 autoidle_mask; - void __iomem *idlest_reg; u8 idlest_bit; # endif }; @@ -71,12 +71,12 @@ struct clk { unsigned long rate; __u32 flags; void __iomem *enable_reg; - __u8 enable_bit; - __s8 usecount; void (*recalc)(struct clk *); int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); + __u8 enable_bit; + __s8 usecount; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) u8 fixed_div; void __iomem *clksel_reg; -- cgit v0.10.2 From ae8fce5c3baf84e319269e67823cf337ed9d359a Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 5 Nov 2008 12:54:04 +0000 Subject: [ARM] omap: remove clk_deny_idle and clk_allow_idle Nothing makes any use of these functions, so there's little point in providing them. Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index c53205c..7b04007 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -316,34 +316,6 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -void clk_deny_idle(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_deny_idle) - arch_clock->clk_deny_idle(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_deny_idle); - -void clk_allow_idle(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_allow_idle) - arch_clock->clk_allow_idle(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_allow_idle); - void clk_enable_init_clocks(void) { struct clk *clkp; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 6c24835..4831bbd 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -119,8 +119,6 @@ extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); extern void followparent_recalc(struct clk * clk); -extern void clk_allow_idle(struct clk *clk); -extern void clk_deny_idle(struct clk *clk); extern int clk_get_usecount(struct clk *clk); extern void clk_enable_init_clocks(void); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 2a9c27a..ca81830 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -118,18 +118,6 @@ extern void prevent_idle_sleep(void); extern void allow_idle_sleep(void); -/** - * clk_deny_idle - Prevents the clock from being idled during MPU idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -/** - * clk_allow_idle - Counters previous clk_deny_idle - * @clk: clock signal handle - */ -void clk_allow_idle(struct clk *clk); - extern void omap_pm_idle(void); extern void omap_pm_suspend(void); extern void omap730_cpu_suspend(unsigned short, unsigned short); -- cgit v0.10.2 From 2e777bf1f2482be13c2b678744d3497a4f0a0ec2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Feb 2009 17:49:22 +0000 Subject: [ARM] omap: provide a standard clk_get_parent() implementation which only has to return clk->parent. Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 7b04007..ae77e10 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -207,18 +207,7 @@ EXPORT_SYMBOL(clk_set_parent); struct clk *clk_get_parent(struct clk *clk) { - unsigned long flags; - struct clk * ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_get_parent) - ret = arch_clock->clk_get_parent(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; + return clk->parent; } EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 4831bbd..06dd38a 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -102,7 +102,6 @@ struct clk_functions { long (*clk_round_rate)(struct clk *clk, unsigned long rate); int (*clk_set_rate)(struct clk *clk, unsigned long rate); int (*clk_set_parent)(struct clk *clk, struct clk *parent); - struct clk * (*clk_get_parent)(struct clk *clk); void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); -- cgit v0.10.2 From c6af45085211db8720d6b94b3985ce7198d764e3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 13:01:32 +0000 Subject: [ARM] omap: move clock propagation into core omap clock code Move the clock propagation calls for set_parent and set_rate into the core omap clock code, rather than having these calls scattered throughout the OMAP1 and OMAP2 implementations. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index ff40810..ee1b9f2 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -628,9 +628,6 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) ret = 0; } - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); - return ret; } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 76afb7b..7a1d56a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -684,9 +684,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) if (clk->set_rate != NULL) ret = clk->set_rate(clk, rate); - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); - return ret; } @@ -774,9 +771,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) pr_debug("clock: set parent of %s to %s (new rate %ld)\n", clk->name, clk->parent->name, clk->rate); - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); - return 0; } diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index ae77e10..b7137c5 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -182,6 +182,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_rate) ret = arch_clock->clk_set_rate(clk, rate); + if (ret == 0 && (clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); spin_unlock_irqrestore(&clockfw_lock, flags); return ret; @@ -198,7 +200,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent) spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_parent) - ret = arch_clock->clk_set_parent(clk, parent); + ret = arch_clock->clk_set_parent(clk, parent); + if (ret == 0 && (clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); spin_unlock_irqrestore(&clockfw_lock, flags); return ret; -- cgit v0.10.2 From a9e882096317a088087b608d272da7029a6cc8c8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 13:07:00 +0000 Subject: [ARM] omap: remove unnecessary calls to propagate_rate() We've always called propagate_rate() in the parent function to the .set_rate methods, so there's no point having the .set_rate methods also call this heavy-weight function - it's mere duplication of what's happening elsewhere. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index ee1b9f2..80a58e9 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -308,7 +308,6 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); ck_dpll1.rate = ptr->pll_rate; - propagate_rate(&ck_dpll1); return 0; } @@ -333,9 +332,6 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) ret = 0; } - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); - return ret; } @@ -442,8 +438,6 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) omap_writel(l, MOD_CONF_CTRL_1); clk->rate = p_rate / (div + 1); - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); return 0; } @@ -787,7 +781,6 @@ int __init omap1_clk_init(void) } } } - propagate_rate(&ck_dpll1); #else /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { @@ -796,9 +789,9 @@ int __init omap1_clk_init(void) omap_writew(0x2290, DPLL_CTL); omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; - propagate_rate(&ck_dpll1); } #endif + propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " -- cgit v0.10.2 From 9a5fedac187f30116013a8420149d4ca11a44f0d Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 13:44:15 +0000 Subject: [ARM] omap: move propagate_rate() calls into generic omap clock code propagate_rate() is recursive, so it makes sense to minimise the amount of stack which is used for each recursion. So, rather than recursing back into it from the ->recalc functions if RATE_PROPAGATES is set, do that test at the higher level. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 80a58e9..be50001 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -244,9 +244,6 @@ static void omap1_ckctl_recalc(struct clk * clk) if (unlikely(clk->rate == clk->parent->rate / dsor)) return; /* No change, quick exit */ clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); } static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) @@ -267,9 +264,6 @@ static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) if (unlikely(clk->rate == clk->parent->rate / dsor)) return; /* No change, quick exit */ clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); } /* MPU virtual clock functions */ diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 7a1d56a..53fda99 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -167,9 +167,6 @@ void omap2_fixed_divisor_recalc(struct clk *clk) WARN_ON(!clk->fixed_div); clk->rate = clk->parent->rate / clk->fixed_div; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); } /** @@ -392,9 +389,6 @@ void omap2_clksel_recalc(struct clk *clk) clk->rate = clk->parent->rate / div; pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div); - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); } /** diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 866a618..3a0a1b8 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -199,8 +199,6 @@ long omap2_dpllcore_round_rate(unsigned long target_rate) static void omap2_dpllcore_recalc(struct clk *clk) { clk->rate = omap2_get_dpll_rate_24xx(clk); - - propagate_rate(clk); } static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) @@ -442,13 +440,11 @@ static u32 omap2_get_sysclkdiv(void) static void omap2_osc_clk_recalc(struct clk *clk) { clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv(); - propagate_rate(clk); } static void omap2_sys_clk_recalc(struct clk *clk) { clk->rate = clk->parent->rate / omap2_get_sysclkdiv(); - propagate_rate(clk); } /* @@ -502,7 +498,9 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); for (clkp = onchip_24xx_clks; clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 486fd80..e07dcba 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -624,7 +624,6 @@ static struct clk func_32k_ck = { .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", - .recalc = &propagate_rate, }; /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ @@ -655,7 +654,6 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", - .recalc = &propagate_rate, }; /* @@ -702,7 +700,6 @@ static struct clk apll96_ck = { .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, - .recalc = &propagate_rate, }; static struct clk apll54_ck = { @@ -715,7 +712,6 @@ static struct clk apll54_ck = { .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, - .recalc = &propagate_rate, }; /* diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 2f2d43d..52698fb 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -57,8 +57,6 @@ static const struct clkops clkops_noncore_dpll_ops; static void omap3_dpll_recalc(struct clk *clk) { clk->rate = omap2_get_dpll_rate(clk); - - propagate_rate(clk); } /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ @@ -388,9 +386,6 @@ static void omap3_clkoutx2_recalc(struct clk *clk) clk->rate = clk->parent->rate; else clk->rate = clk->parent->rate * 2; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); } /* Common clock code */ diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 335ef88..dcacec8 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -58,7 +58,6 @@ static struct clk omap_32k_fck = { .ops = &clkops_null, .rate = 32768, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk secure_32k_fck = { @@ -66,7 +65,6 @@ static struct clk secure_32k_fck = { .ops = &clkops_null, .rate = 32768, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; /* Virtual source clocks for osc_sys_ck */ @@ -75,7 +73,6 @@ static struct clk virt_12m_ck = { .ops = &clkops_null, .rate = 12000000, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk virt_13m_ck = { @@ -83,7 +80,6 @@ static struct clk virt_13m_ck = { .ops = &clkops_null, .rate = 13000000, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk virt_16_8m_ck = { @@ -91,7 +87,6 @@ static struct clk virt_16_8m_ck = { .ops = &clkops_null, .rate = 16800000, .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk virt_19_2m_ck = { @@ -99,7 +94,6 @@ static struct clk virt_19_2m_ck = { .ops = &clkops_null, .rate = 19200000, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk virt_26m_ck = { @@ -107,7 +101,6 @@ static struct clk virt_26m_ck = { .ops = &clkops_null, .rate = 26000000, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static struct clk virt_38_4m_ck = { @@ -115,7 +108,6 @@ static struct clk virt_38_4m_ck = { .ops = &clkops_null, .rate = 38400000, .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, - .recalc = &propagate_rate, }; static const struct clksel_rate osc_sys_12m_rates[] = { @@ -201,7 +193,6 @@ static struct clk sys_altclk = { .name = "sys_altclk", .ops = &clkops_null, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .recalc = &propagate_rate, }; /* Optional external clock input for some McBSPs */ @@ -209,7 +200,6 @@ static struct clk mcbsp_clks = { .name = "mcbsp_clks", .ops = &clkops_null, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .recalc = &propagate_rate, }; /* PRM EXTERNAL CLOCK OUTPUT */ diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index b7137c5..df58f5d 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -246,8 +246,6 @@ void followparent_recalc(struct clk *clk) return; clk->rate = clk->parent->rate; - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); } /* Propagate rate to children */ @@ -261,8 +259,10 @@ void propagate_rate(struct clk * tclk) list_for_each_entry(clkp, &clocks, node) { if (likely(clkp->parent != tclk)) continue; - if (likely((u32)clkp->recalc)) + if (clkp->recalc) clkp->recalc(clkp); + if (clkp->flags & RATE_PROPAGATES) + propagate_rate(clkp); } } @@ -278,8 +278,12 @@ void recalculate_root_clocks(void) struct clk *clkp; list_for_each_entry(clkp, &clocks, node) { - if (unlikely(!clkp->parent) && likely((u32)clkp->recalc)) - clkp->recalc(clkp); + if (!clkp->parent) { + if (clkp->recalc) + clkp->recalc(clkp); + if (clkp->flags & RATE_PROPAGATES) + propagate_rate(clkp); + } } } -- cgit v0.10.2 From d5e6072b753041b56236b014ccfd72a0d3177e08 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Feb 2009 16:07:46 +0000 Subject: [ARM] omap: handle RATE_CKCTL via .set_rate/.round_rate methods It makes no sense to have the CKCTL rate selection implemented as a flag and a special exception in the top level set_rate/round_rate methods. Provide CKCTL set_rate/round_rate methods, and use these for where ever RATE_CKCTL is used and they're not already overridden. This allows us to remove the RATE_CKCTL flag. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index be50001..6b17da1 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -216,9 +216,6 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) struct clk * parent; unsigned dsor_exp; - if (unlikely(!(clk->flags & RATE_CKCTL))) - return -EINVAL; - parent = clk->parent; if (unlikely(parent == NULL)) return -EIO; @@ -307,26 +304,52 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { - int ret = -EINVAL; - int dsor_exp; - __u16 regval; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - regval = __raw_readw(DSP_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - __raw_writew(regval, DSP_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - ret = 0; - } + int dsor_exp; + u16 regval; - return ret; + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = __raw_readw(DSP_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + __raw_writew(regval, DSP_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + + return 0; +} + +static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +{ + int dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp < 0) + return dsor_exp; + if (dsor_exp > 3) + dsor_exp = 3; + return clk->parent->rate / (1 << dsor_exp); +} + +static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +{ + int dsor_exp; + u16 regval; + + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = omap_readw(ARM_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + regval = verify_ckctl_value(regval); + omap_writew(regval, ARM_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + return 0; } static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) @@ -572,20 +595,9 @@ static const struct clkops clkops_generic = { static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { - int dsor_exp; - if (clk->flags & RATE_FIXED) return clk->rate; - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp < 0) - return dsor_exp; - if (dsor_exp > 3) - dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); - } - if (clk->round_rate != NULL) return clk->round_rate(clk, rate); @@ -595,27 +607,9 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; - int dsor_exp; - __u16 regval; if (clk->set_rate) ret = clk->set_rate(clk, rate); - else if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - regval = omap_readw(ARM_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - regval = verify_ckctl_value(regval); - omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - ret = 0; - } - return ret; } diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 8673832..aa7b3d6 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -27,6 +27,9 @@ static void omap1_init_ext_clk(struct clk * clk); static int omap1_select_table_rate(struct clk * clk, unsigned long rate); static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); +static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); + struct mpu_rate { unsigned long rate; unsigned long xtal; @@ -189,9 +192,11 @@ static struct clk arm_ck = { .ops = &clkops_null, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES, + CLOCK_IN_OMAP310 | RATE_PROPAGATES, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct arm_idlect1_clk armper_ck = { @@ -200,12 +205,13 @@ static struct arm_idlect1_clk armper_ck = { .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_CKCTL | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 2, }; @@ -279,22 +285,24 @@ static struct clk dsp_ck = { .name = "dsp_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_CKCTL, .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct clk dspmmu_ck = { .name = "dspmmu_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, + .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct clk dspper_ck = { @@ -302,11 +310,12 @@ static struct clk dspper_ck = { .ops = &clkops_dspck, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | VIRTUAL_IO_ADDRESS, + VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = &omap1_clk_set_rate_dsp_domain, }; @@ -340,10 +349,11 @@ static struct arm_idlect1_clk tc_ck = { .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | - RATE_CKCTL | RATE_PROPAGATES | - CLOCK_IDLE_CONTROL, + RATE_PROPAGATES | CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 6, }; @@ -466,11 +476,13 @@ static struct clk lcd_ck_16xx = { .name = "lcd_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct arm_idlect1_clk lcd_ck_1510 = { @@ -479,11 +491,13 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - RATE_CKCTL | CLOCK_IDLE_CONTROL, + CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 3, }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 06dd38a..5a7411e 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -124,7 +124,7 @@ extern void clk_enable_init_clocks(void); extern const struct clkops clkops_null; /* Clock flags */ -#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ +/* bit 0 is free */ #define RATE_FIXED (1 << 1) /* Fixed clock rate */ #define RATE_PROPAGATES (1 << 2) /* Program children too */ /* bits 3-4 are free */ -- cgit v0.10.2 From 1e98ffa85e70f423e2e41156cc3d549c353cd897 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 18:56:17 +0000 Subject: [ARM] omap: ensure devname is set for dummy devices This is needed to use these with the clkdev helpers. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index ce03fa7..9730404 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -348,6 +348,7 @@ static void __init omap_hsmmc_reset(void) } dummy_pdev.id = i; + dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i); iclk = clk_get(dev, "mmchs_ick"); if (iclk && clk_enable(iclk)) iclk = NULL; -- cgit v0.10.2 From dbb674d57b5851a4fe3122ff4280e4cf87209198 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 22 Jan 2009 16:08:04 +0000 Subject: [ARM] omap: allow double-registering of clocks This stops things blowing up if a 'struct clk' to be passed more than once to clk_register(), which will be required when we decouple struct clk's from their names. Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index df58f5d..6b3ef2a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -292,6 +292,12 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); if (clk->init) -- cgit v0.10.2 From d7e8f1f9d655af2c7ea90738bf567aa6990159b3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Jan 2009 23:03:15 +0000 Subject: [ARM] omap: convert OMAP1 to use clkdev Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 6b17da1..829b9b8 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -32,6 +33,83 @@ static const struct clkops clkops_dspck; #include "clock.h" +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_310 (1 << 0) +#define CK_730 (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armwdt_ck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "mmc_ck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.1", "mmc_ck", &mmc2_ck, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "i2c_fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "i2c_ick", &i2c_ick, CK_16XX), +}; + static int omap1_clk_enable_generic(struct clk * clk); static int omap1_clk_enable(struct clk *clk); static void omap1_clk_disable_generic(struct clk * clk); @@ -677,10 +755,10 @@ static struct clk_functions omap1_clk_functions = { int __init omap1_clk_init(void) { - struct clk ** clkp; + struct omap_clk *c; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ - u32 reg; + u32 reg, cpu_mask; #ifdef CONFIG_DEBUG_LL /* Resets some clocks that may be left on from bootloader, @@ -700,27 +778,21 @@ int __init omap1_clk_init(void) /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) { - clk_register(*clkp); - continue; + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap730()) + cpu_mask |= CK_730; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); } - } info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); if (info != NULL) { @@ -831,4 +903,3 @@ int __init omap1_clk_init(void) return 0; } - diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index aa7b3d6..ed343af 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -149,16 +149,13 @@ static struct clk ck_ref = { .name = "ck_ref", .ops = &clkops_null, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310, }; static struct clk ck_dpll1 = { .name = "ck_dpll1", .ops = &clkops_null, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, }; static struct arm_idlect1_clk ck_dpll1out = { @@ -166,7 +163,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .name = "ck_dpll1out", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL | + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | RATE_PROPAGATES, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_CKOUT_ARM, @@ -179,8 +176,7 @@ static struct clk sossi_ck = { .name = "ck_sossi", .ops = &clkops_generic, .parent = &ck_dpll1out.clk, - .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | - ENABLE_REG_32BIT, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_1, .enable_bit = 16, .recalc = &omap1_sossi_recalc, @@ -191,8 +187,7 @@ static struct clk arm_ck = { .name = "arm_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -204,8 +199,7 @@ static struct arm_idlect1_clk armper_ck = { .name = "armper_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -220,7 +214,6 @@ static struct clk arm_gpio_ck = { .name = "arm_gpio_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_GPIOCK, .recalc = &followparent_recalc, @@ -231,8 +224,7 @@ static struct arm_idlect1_clk armxor_ck = { .name = "armxor_ck", .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, @@ -245,8 +237,7 @@ static struct arm_idlect1_clk armtim_ck = { .name = "armtim_ck", .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, @@ -259,8 +250,7 @@ static struct arm_idlect1_clk armwdt_ck = { .name = "armwdt_ck", .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_WDTCK, .recalc = &omap1_watchdog_recalc, @@ -272,7 +262,6 @@ static struct clk arminth_ck16xx = { .name = "arminth_ck", .ops = &clkops_null, .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 @@ -285,7 +274,6 @@ static struct clk dsp_ck = { .name = "dsp_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_CKCTL, .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, @@ -298,7 +286,6 @@ static struct clk dspmmu_ck = { .name = "dspmmu_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -309,8 +296,7 @@ static struct clk dspper_ck = { .name = "dspper_ck", .ops = &clkops_dspck, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_IO_ADDRESS, + .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -323,8 +309,7 @@ static struct clk dspxor_ck = { .name = "dspxor_ck", .ops = &clkops_dspck, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_IO_ADDRESS, + .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, @@ -334,8 +319,7 @@ static struct clk dsptim_ck = { .name = "dsptim_ck", .ops = &clkops_dspck, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_IO_ADDRESS, + .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, @@ -347,9 +331,7 @@ static struct arm_idlect1_clk tc_ck = { .name = "tc_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | - RATE_PROPAGATES | CLOCK_IDLE_CONTROL, + .flags = RATE_PROPAGATES | CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -362,7 +344,6 @@ static struct clk arminth_ck1510 = { .name = "arminth_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * @@ -375,7 +356,6 @@ static struct clk tipb_ck = { .name = "tipb_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .recalc = &followparent_recalc, }; @@ -384,7 +364,6 @@ static struct clk l3_ocpi_ck = { .name = "l3_ocpi_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_OCPI_CK, .recalc = &followparent_recalc, @@ -394,7 +373,6 @@ static struct clk tc1_ck = { .name = "tc1_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_TC1_CK, .recalc = &followparent_recalc, @@ -404,7 +382,6 @@ static struct clk tc2_ck = { .name = "tc2_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)ARM_IDLECT3, .enable_bit = EN_TC2_CK, .recalc = &followparent_recalc, @@ -415,8 +392,6 @@ static struct clk dma_ck = { .name = "dma_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310, .recalc = &followparent_recalc, }; @@ -424,7 +399,6 @@ static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; @@ -433,8 +407,7 @@ static struct arm_idlect1_clk api_ck = { .name = "api_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_APICK, .recalc = &followparent_recalc, @@ -447,8 +420,7 @@ static struct arm_idlect1_clk lb_ck = { .name = "lb_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LBCK, .recalc = &followparent_recalc, @@ -460,7 +432,6 @@ static struct clk rhea1_ck = { .name = "rhea1_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; @@ -468,7 +439,6 @@ static struct clk rhea2_ck = { .name = "rhea2_ck", .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, .recalc = &followparent_recalc, }; @@ -476,7 +446,6 @@ static struct clk lcd_ck_16xx = { .name = "lcd_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, @@ -490,8 +459,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .name = "lcd_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, @@ -508,8 +476,7 @@ static struct clk uart1_1510 = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -523,8 +490,8 @@ static struct uart_clk uart1_16xx = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 29, }, @@ -537,9 +504,7 @@ static struct clk uart2_ck = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -552,8 +517,7 @@ static struct clk uart3_1510 = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -567,8 +531,8 @@ static struct uart_clk uart3_16xx = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 31, }, @@ -580,8 +544,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 6000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, + .flags = RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, .enable_bit = USB_MCLK_EN_BIT, }; @@ -591,8 +554,7 @@ static struct clk usb_hhc_ck1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = USB_HOST_HHC_UHOST_EN, }; @@ -603,8 +565,7 @@ static struct clk usb_hhc_ck16xx = { /* Direct from ULPD, no parent */ .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, .enable_bit = 8 /* UHOST_EN */, }; @@ -614,7 +575,7 @@ static struct clk usb_dc_ck = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .flags = RATE_FIXED, .enable_reg = (void __iomem *)SOFT_REQ_REG, .enable_bit = 4, }; @@ -624,7 +585,7 @@ static struct clk mclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, + .flags = RATE_FIXED, .enable_reg = (void __iomem *)SOFT_REQ_REG, .enable_bit = 6, }; @@ -633,7 +594,6 @@ static struct clk mclk_16xx = { .name = "mclk", .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, .enable_bit = COM_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -646,14 +606,13 @@ static struct clk bclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, + .flags = RATE_FIXED, }; static struct clk bclk_16xx = { .name = "bclk", .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, .enable_bit = SWD_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -667,9 +626,7 @@ static struct clk mmc1_ck = { /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 23, }; @@ -681,8 +638,7 @@ static struct clk mmc2_ck = { /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 20, }; @@ -690,8 +646,6 @@ static struct clk mmc2_ck = { static struct clk virtual_ck_mpu = { .name = "mpu", .ops = &clkops_null, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, @@ -704,8 +658,7 @@ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, .ops = &clkops_null, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_NO_IDLE_PARENT, + .flags = CLOCK_NO_IDLE_PARENT, .parent = &armxor_ck.clk, .recalc = &followparent_recalc, }; @@ -714,62 +667,9 @@ static struct clk i2c_ick = { .name = "i2c_ick", .id = 1, .ops = &clkops_null, - .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT, + .flags = CLOCK_NO_IDLE_PARENT, .parent = &armper_ck.clk, .recalc = &followparent_recalc, }; -static struct clk * onchip_clks[] = { - /* non-ULPD clocks */ - &ck_ref, - &ck_dpll1, - /* CK_GEN1 clocks */ - &ck_dpll1out.clk, - &sossi_ck, - &arm_ck, - &armper_ck.clk, - &arm_gpio_ck, - &armxor_ck.clk, - &armtim_ck.clk, - &armwdt_ck.clk, - &arminth_ck1510, &arminth_ck16xx, - /* CK_GEN2 clocks */ - &dsp_ck, - &dspmmu_ck, - &dspper_ck, - &dspxor_ck, - &dsptim_ck, - /* CK_GEN3 clocks */ - &tc_ck.clk, - &tipb_ck, - &l3_ocpi_ck, - &tc1_ck, - &tc2_ck, - &dma_ck, - &dma_lcdfree_ck, - &api_ck.clk, - &lb_ck.clk, - &rhea1_ck, - &rhea2_ck, - &lcd_ck_16xx, - &lcd_ck_1510.clk, - /* ULPD clocks */ - &uart1_1510, - &uart1_16xx.clk, - &uart2_ck, - &uart3_1510, - &uart3_16xx.clk, - &usb_clko, - &usb_hhc_ck1510, &usb_hhc_ck16xx, - &usb_dc_ck, - &mclk_1510, &mclk_16xx, - &bclk_1510, &bclk_16xx, - &mmc1_ck, - &mmc2_ck, - /* Virtual clocks */ - &virtual_ck_mpu, - &i2c_fck, - &i2c_ick, -}; - #endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 46d3b0b..fc7b683 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -11,6 +11,7 @@ choice config ARCH_OMAP1 bool "TI OMAP1" + select COMMON_CLKDEV config ARCH_OMAP2 bool "TI OMAP2" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 6b3ef2a..6b88f78 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,6 +36,7 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ +#ifndef CONFIG_COMMON_CLKDEV /* * Returns a clock. Note that we first try to use device id on the bus * and clock name. If this fails, we try to use clock name only. @@ -72,6 +73,7 @@ found: return clk; } EXPORT_SYMBOL(clk_get); +#endif int clk_enable(struct clk *clk) { @@ -145,10 +147,12 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +#ifndef CONFIG_COMMON_CLKDEV void clk_put(struct clk *clk) { } EXPORT_SYMBOL(clk_put); +#endif /*------------------------------------------------------------------------- * Optional clock functions defined in include/linux/clk.h diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h new file mode 100644 index 0000000..730c49d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 5a7411e..2af4bc2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -136,11 +136,7 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-20 are currently free */ -#define CLOCK_IN_OMAP310 (1 << 21) -#define CLOCK_IN_OMAP730 (1 << 22) -#define CLOCK_IN_OMAP1510 (1 << 23) -#define CLOCK_IN_OMAP16XX (1 << 24) +/* bits 13-24 are currently free */ #define CLOCK_IN_OMAP242X (1 << 25) #define CLOCK_IN_OMAP243X (1 << 26) #define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -- cgit v0.10.2 From 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 15:27:29 +0000 Subject: [ARM] omap: convert OMAP2 to use clkdev Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 3a0a1b8..36093ea 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -31,6 +31,7 @@ #include #include #include +#include #include "memory.h" #include "clock.h" @@ -44,6 +45,177 @@ static const struct clkops clkops_fixed; #include "clock24xx.h" +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_243X (1 << 0) +#define CK_242X (1 << 1) + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), + CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK(NULL, "cam_fck", &cam_fck, CK_243X | CK_242X), + CLK(NULL, "cam_ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), + CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK(NULL, "hdq_ick", &hdq_ick, CK_243X | CK_242X), + CLK(NULL, "hdq_fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "i2c_ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "i2c_fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "i2c_fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "i2c_ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "i2c_fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "i2c_fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK(NULL, "rng_ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ #define EN_APLL_STOPPED 0 #define EN_APLL_LOCKED 3 @@ -487,8 +659,8 @@ arch_initcall(omap2_clk_arch_init); int __init omap2_clk_init(void) { struct prcm_config *prcm; - struct clk **clkp; - u32 clkrate; + struct omap_clk *c; + u32 clkrate, cpu_mask; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -502,21 +674,18 @@ int __init omap2_clk_init(void) omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - for (clkp = onchip_24xx_clks; - clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks); - clkp++) { + cpu_mask = 0; + if (cpu_is_omap2420()) + cpu_mask |= CK_242X; + if (cpu_is_omap2430()) + cpu_mask |= CK_243X; - if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { - clk_register(*clkp); - continue; + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); } - if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { - clk_register(*clkp); - continue; - } - } - /* Check the MPU rate set by bootloader */ clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index e07dcba..b244247 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -621,8 +621,7 @@ static struct clk func_32k_ck = { .name = "func_32k_ck", .ops = &clkops_null, .rate = 32000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", }; @@ -630,8 +629,7 @@ static struct clk func_32k_ck = { static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .ops = &clkops_oscck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_osc_clk_recalc, }; @@ -641,8 +639,7 @@ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ .ops = &clkops_null, .parent = &osc_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; @@ -651,8 +648,7 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .name = "alt_ck", .ops = &clkops_null, .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", }; @@ -683,8 +679,7 @@ static struct clk dpll_ck = { .ops = &clkops_null, .parent = &sys_ck, /* Can be func_32k also */ .dpll_data = &dpll_dd, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, @@ -695,8 +690,7 @@ static struct clk apll96_ck = { .ops = &clkops_fixed, .parent = &sys_ck, .rate = 96000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, @@ -707,8 +701,7 @@ static struct clk apll54_ck = { .ops = &clkops_fixed, .parent = &sys_ck, .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, @@ -740,8 +733,7 @@ static struct clk func_54m_ck = { .name = "func_54m_ck", .ops = &clkops_null, .parent = &apll54_ck, /* can also be alt_clk */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -754,8 +746,7 @@ static struct clk core_ck = { .name = "core_ck", .ops = &clkops_null, .parent = &dpll_ck, /* can also be 32k */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -782,8 +773,7 @@ static struct clk func_96m_ck = { .name = "func_96m_ck", .ops = &clkops_null, .parent = &apll96_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -816,8 +806,7 @@ static struct clk func_48m_ck = { .name = "func_48m_ck", .ops = &clkops_null, .parent = &apll96_ck, /* 96M or Alt */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -833,8 +822,7 @@ static struct clk func_12m_ck = { .ops = &clkops_null, .parent = &func_48m_ck, .fixed_div = 4, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -844,7 +832,6 @@ static struct clk wdt1_osc_ck = { .name = "ck_wdt1_osc", .ops = &clkops_null, /* RMK: missing? */ .parent = &osc_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .recalc = &followparent_recalc, }; @@ -888,8 +875,7 @@ static struct clk sys_clkout_src = { .name = "sys_clkout_src", .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, @@ -920,7 +906,6 @@ static struct clk sys_clkout = { .name = "sys_clkout", .ops = &clkops_null, .parent = &sys_clkout_src, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, @@ -935,7 +920,7 @@ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, @@ -958,7 +943,6 @@ static struct clk sys_clkout2 = { .name = "sys_clkout2", .ops = &clkops_null, .parent = &sys_clkout2_src, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, @@ -972,7 +956,6 @@ static struct clk emul_ck = { .name = "emul_ck", .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, @@ -1008,9 +991,7 @@ static struct clk mpu_ck = { /* Control cpu */ .name = "mpu_ck", .ops = &clkops_null, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), @@ -1052,8 +1033,7 @@ static struct clk dsp_fck = { .name = "dsp_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, .clkdm_name = "dsp_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, @@ -1083,8 +1063,7 @@ static struct clk dsp_irate_ick = { .name = "dsp_irate_ick", .ops = &clkops_null, .parent = &dsp_fck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | - CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK, .clksel = dsp_irate_ick_clksel, @@ -1098,7 +1077,7 @@ static struct clk dsp_ick = { .name = "dsp_ick", /* apparently ipi and isp */ .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, - .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN), .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */ }; @@ -1108,7 +1087,7 @@ static struct clk iva2_1_ick = { .name = "iva2_1_ick", .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, - .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, }; @@ -1122,8 +1101,7 @@ static struct clk iva1_ifck = { .name = "iva1_ifck", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | - RATE_PROPAGATES | DELAYED_APP, + .flags = CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, @@ -1140,7 +1118,6 @@ static struct clk iva1_mpu_int_ifck = { .name = "iva1_mpu_int_ifck", .ops = &clkops_omap2_dflt_wait, .parent = &iva1_ifck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, @@ -1187,9 +1164,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .name = "core_l3_ck", .ops = &clkops_null, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, @@ -1217,8 +1192,7 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .name = "usb_l4_ick", .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, @@ -1252,8 +1226,7 @@ static struct clk l4_ck = { /* used both as an ick and fck */ .name = "l4_ck", .ops = &clkops_null, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP | RATE_PROPAGATES, + .flags = DELAYED_APP | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, @@ -1291,8 +1264,7 @@ static struct clk ssi_ssr_sst_fck = { .name = "ssi_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_SSI_SHIFT, @@ -1328,7 +1300,6 @@ static struct clk gfx_3d_fck = { .name = "gfx_3d_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_3D_SHIFT, @@ -1344,7 +1315,6 @@ static struct clk gfx_2d_fck = { .name = "gfx_2d_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_2D_SHIFT, @@ -1360,7 +1330,6 @@ static struct clk gfx_ick = { .name = "gfx_ick", /* From l3 */ .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, @@ -1391,7 +1360,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */ .name = "mdm_ick", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, @@ -1407,7 +1376,6 @@ static struct clk mdm_osc_ck = { .name = "mdm_osc_ck", .ops = &clkops_omap2_dflt_wait, .parent = &osc_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), .enable_bit = OMAP2430_EN_OSC_SHIFT, @@ -1453,7 +1421,6 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", .ops = &clkops_omap2_dflt, .parent = &l4_ck, /* really both l3 and l4 */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, @@ -1464,8 +1431,7 @@ static struct clk dss1_fck = { .name = "dss1_fck", .ops = &clkops_omap2_dflt, .parent = &core_ck, /* Core or sys */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, @@ -1498,8 +1464,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */ .name = "dss2_fck", .ops = &clkops_omap2_dflt, .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS2_SHIFT, @@ -1514,7 +1479,6 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */ .name = "dss_54m_fck", /* 54m tv clk */ .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_TV_SHIFT, @@ -1543,7 +1507,6 @@ static struct clk gpt1_ick = { .name = "gpt1_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, @@ -1554,7 +1517,6 @@ static struct clk gpt1_fck = { .name = "gpt1_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, @@ -1571,7 +1533,6 @@ static struct clk gpt2_ick = { .name = "gpt2_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, @@ -1582,7 +1543,6 @@ static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, @@ -1597,7 +1557,6 @@ static struct clk gpt3_ick = { .name = "gpt3_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, @@ -1608,7 +1567,6 @@ static struct clk gpt3_fck = { .name = "gpt3_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, @@ -1623,7 +1581,6 @@ static struct clk gpt4_ick = { .name = "gpt4_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, @@ -1634,7 +1591,6 @@ static struct clk gpt4_fck = { .name = "gpt4_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, @@ -1649,7 +1605,6 @@ static struct clk gpt5_ick = { .name = "gpt5_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, @@ -1660,7 +1615,6 @@ static struct clk gpt5_fck = { .name = "gpt5_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, @@ -1675,7 +1629,6 @@ static struct clk gpt6_ick = { .name = "gpt6_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, @@ -1686,7 +1639,6 @@ static struct clk gpt6_fck = { .name = "gpt6_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, @@ -1701,7 +1653,6 @@ static struct clk gpt7_ick = { .name = "gpt7_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, .recalc = &followparent_recalc, @@ -1711,7 +1662,6 @@ static struct clk gpt7_fck = { .name = "gpt7_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, @@ -1726,7 +1676,6 @@ static struct clk gpt8_ick = { .name = "gpt8_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, @@ -1737,7 +1686,6 @@ static struct clk gpt8_fck = { .name = "gpt8_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, @@ -1752,7 +1700,6 @@ static struct clk gpt9_ick = { .name = "gpt9_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, @@ -1763,7 +1710,6 @@ static struct clk gpt9_fck = { .name = "gpt9_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, @@ -1778,7 +1724,6 @@ static struct clk gpt10_ick = { .name = "gpt10_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, @@ -1789,7 +1734,6 @@ static struct clk gpt10_fck = { .name = "gpt10_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, @@ -1804,7 +1748,6 @@ static struct clk gpt11_ick = { .name = "gpt11_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, @@ -1815,7 +1758,6 @@ static struct clk gpt11_fck = { .name = "gpt11_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, @@ -1830,7 +1772,6 @@ static struct clk gpt12_ick = { .name = "gpt12_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, @@ -1841,7 +1782,6 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, @@ -1857,7 +1797,6 @@ static struct clk mcbsp1_ick = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, @@ -1869,7 +1808,6 @@ static struct clk mcbsp1_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, @@ -1881,7 +1819,6 @@ static struct clk mcbsp2_ick = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, @@ -1893,7 +1830,6 @@ static struct clk mcbsp2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, @@ -1905,7 +1841,6 @@ static struct clk mcbsp3_ick = { .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, @@ -1917,7 +1852,6 @@ static struct clk mcbsp3_fck = { .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, @@ -1929,7 +1863,6 @@ static struct clk mcbsp4_ick = { .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, @@ -1941,7 +1874,6 @@ static struct clk mcbsp4_fck = { .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, @@ -1953,7 +1885,6 @@ static struct clk mcbsp5_ick = { .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, @@ -1965,7 +1896,6 @@ static struct clk mcbsp5_fck = { .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, @@ -1978,7 +1908,6 @@ static struct clk mcspi1_ick = { .id = 1, .parent = &l4_ck, .clkdm_name = "core_l4_clkdm", - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, .recalc = &followparent_recalc, @@ -1989,7 +1918,6 @@ static struct clk mcspi1_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, @@ -2001,7 +1929,6 @@ static struct clk mcspi2_ick = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, @@ -2013,7 +1940,6 @@ static struct clk mcspi2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, @@ -2025,7 +1951,6 @@ static struct clk mcspi3_ick = { .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, @@ -2037,7 +1962,6 @@ static struct clk mcspi3_fck = { .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, @@ -2048,7 +1972,6 @@ static struct clk uart1_ick = { .name = "uart1_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, @@ -2059,7 +1982,6 @@ static struct clk uart1_fck = { .name = "uart1_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, @@ -2070,7 +1992,6 @@ static struct clk uart2_ick = { .name = "uart2_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, @@ -2081,7 +2002,6 @@ static struct clk uart2_fck = { .name = "uart2_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, @@ -2092,7 +2012,6 @@ static struct clk uart3_ick = { .name = "uart3_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, @@ -2103,7 +2022,6 @@ static struct clk uart3_fck = { .name = "uart3_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, @@ -2114,7 +2032,6 @@ static struct clk gpios_ick = { .name = "gpios_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, @@ -2125,7 +2042,6 @@ static struct clk gpios_fck = { .name = "gpios_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, @@ -2136,7 +2052,6 @@ static struct clk mpu_wdt_ick = { .name = "mpu_wdt_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, @@ -2147,7 +2062,6 @@ static struct clk mpu_wdt_fck = { .name = "mpu_wdt_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, @@ -2158,8 +2072,7 @@ static struct clk sync_32k_ick = { .name = "sync_32k_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, @@ -2170,7 +2083,6 @@ static struct clk wdt1_ick = { .name = "wdt1_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_WDT1_SHIFT, @@ -2181,8 +2093,7 @@ static struct clk omapctrl_ick = { .name = "omapctrl_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, @@ -2193,7 +2104,6 @@ static struct clk icr_ick = { .name = "icr_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP2430_EN_ICR_SHIFT, @@ -2204,7 +2114,6 @@ static struct clk cam_ick = { .name = "cam_ick", .ops = &clkops_omap2_dflt, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, @@ -2220,7 +2129,6 @@ static struct clk cam_fck = { .name = "cam_fck", .ops = &clkops_omap2_dflt, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, @@ -2231,7 +2139,6 @@ static struct clk mailboxes_ick = { .name = "mailboxes_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, @@ -2242,7 +2149,6 @@ static struct clk wdt4_ick = { .name = "wdt4_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, @@ -2253,7 +2159,6 @@ static struct clk wdt4_fck = { .name = "wdt4_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, @@ -2264,7 +2169,6 @@ static struct clk wdt3_ick = { .name = "wdt3_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, @@ -2275,7 +2179,6 @@ static struct clk wdt3_fck = { .name = "wdt3_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, @@ -2286,7 +2189,6 @@ static struct clk mspro_ick = { .name = "mspro_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, @@ -2297,7 +2199,6 @@ static struct clk mspro_fck = { .name = "mspro_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, @@ -2308,7 +2209,6 @@ static struct clk mmc_ick = { .name = "mmc_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, @@ -2319,7 +2219,6 @@ static struct clk mmc_fck = { .name = "mmc_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, @@ -2330,7 +2229,6 @@ static struct clk fac_ick = { .name = "fac_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, @@ -2341,7 +2239,6 @@ static struct clk fac_fck = { .name = "fac_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, @@ -2352,7 +2249,6 @@ static struct clk eac_ick = { .name = "eac_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, @@ -2363,7 +2259,6 @@ static struct clk eac_fck = { .name = "eac_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, @@ -2374,7 +2269,6 @@ static struct clk hdq_ick = { .name = "hdq_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, @@ -2385,7 +2279,6 @@ static struct clk hdq_fck = { .name = "hdq_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, @@ -2397,7 +2290,6 @@ static struct clk i2c2_ick = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, @@ -2409,7 +2301,6 @@ static struct clk i2c2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, @@ -2421,7 +2312,6 @@ static struct clk i2chs2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, @@ -2433,7 +2323,6 @@ static struct clk i2c1_ick = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, @@ -2445,7 +2334,6 @@ static struct clk i2c1_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, @@ -2457,7 +2345,6 @@ static struct clk i2chs1_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, @@ -2468,8 +2355,7 @@ static struct clk gpmc_fck = { .name = "gpmc_fck", .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2478,7 +2364,6 @@ static struct clk sdma_fck = { .name = "sdma_fck", .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2487,7 +2372,6 @@ static struct clk sdma_ick = { .name = "sdma_ick", .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2496,7 +2380,6 @@ static struct clk vlynq_ick = { .name = "vlynq_ick", .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, @@ -2532,7 +2415,7 @@ static struct clk vlynq_fck = { .name = "vlynq_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, @@ -2549,7 +2432,7 @@ static struct clk sdrc_ick = { .name = "sdrc_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP2430_EN_SDRC_SHIFT, @@ -2560,7 +2443,6 @@ static struct clk des_ick = { .name = "des_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_DES_SHIFT, @@ -2571,7 +2453,6 @@ static struct clk sha_ick = { .name = "sha_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_SHA_SHIFT, @@ -2582,7 +2463,6 @@ static struct clk rng_ick = { .name = "rng_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_RNG_SHIFT, @@ -2593,7 +2473,6 @@ static struct clk aes_ick = { .name = "aes_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_AES_SHIFT, @@ -2604,7 +2483,6 @@ static struct clk pka_ick = { .name = "pka_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_PKA_SHIFT, @@ -2615,7 +2493,6 @@ static struct clk usb_fck = { .name = "usb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, @@ -2626,7 +2503,6 @@ static struct clk usbhs_ick = { .name = "usbhs_ick", .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_USBHS_SHIFT, @@ -2637,7 +2513,6 @@ static struct clk mmchs1_ick = { .name = "mmchs_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, @@ -2648,7 +2523,6 @@ static struct clk mmchs1_fck = { .name = "mmchs_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, @@ -2660,7 +2534,6 @@ static struct clk mmchs2_ick = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, @@ -2672,7 +2545,6 @@ static struct clk mmchs2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, .recalc = &followparent_recalc, @@ -2682,7 +2554,6 @@ static struct clk gpio5_ick = { .name = "gpio5_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, @@ -2693,7 +2564,6 @@ static struct clk gpio5_fck = { .name = "gpio5_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, @@ -2704,7 +2574,6 @@ static struct clk mdm_intc_ick = { .name = "mdm_intc_ick", .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, @@ -2715,7 +2584,6 @@ static struct clk mmchsdb1_fck = { .name = "mmchsdb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, @@ -2727,7 +2595,6 @@ static struct clk mmchsdb2_fck = { .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, @@ -2751,166 +2618,12 @@ static struct clk mmchsdb2_fck = { static struct clk virt_prcm_set = { .name = "virt_prcm_set", .ops = &clkops_null, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ .set_rate = &omap2_select_table_rate, .round_rate = &omap2_round_to_table_rate, }; -static struct clk *onchip_24xx_clks[] __initdata = { - /* external root sources */ - &func_32k_ck, - &osc_ck, - &sys_ck, - &alt_ck, - /* internal analog sources */ - &dpll_ck, - &apll96_ck, - &apll54_ck, - /* internal prcm root sources */ - &func_54m_ck, - &core_ck, - &func_96m_ck, - &func_48m_ck, - &func_12m_ck, - &wdt1_osc_ck, - &sys_clkout_src, - &sys_clkout, - &sys_clkout2_src, - &sys_clkout2, - &emul_ck, - /* mpu domain clocks */ - &mpu_ck, - /* dsp domain clocks */ - &dsp_fck, - &dsp_irate_ick, - &dsp_ick, /* 242x */ - &iva2_1_ick, /* 243x */ - &iva1_ifck, /* 242x */ - &iva1_mpu_int_ifck, /* 242x */ - /* GFX domain clocks */ - &gfx_3d_fck, - &gfx_2d_fck, - &gfx_ick, - /* Modem domain clocks */ - &mdm_ick, - &mdm_osc_ck, - /* DSS domain clocks */ - &dss_ick, - &dss1_fck, - &dss2_fck, - &dss_54m_fck, - /* L3 domain clocks */ - &core_l3_ck, - &ssi_ssr_sst_fck, - &usb_l4_ick, - /* L4 domain clocks */ - &l4_ck, /* used as both core_l4 and wu_l4 */ - /* virtual meta-group clock */ - &virt_prcm_set, - /* general l4 interface ck, multi-parent functional clk */ - &gpt1_ick, - &gpt1_fck, - &gpt2_ick, - &gpt2_fck, - &gpt3_ick, - &gpt3_fck, - &gpt4_ick, - &gpt4_fck, - &gpt5_ick, - &gpt5_fck, - &gpt6_ick, - &gpt6_fck, - &gpt7_ick, - &gpt7_fck, - &gpt8_ick, - &gpt8_fck, - &gpt9_ick, - &gpt9_fck, - &gpt10_ick, - &gpt10_fck, - &gpt11_ick, - &gpt11_fck, - &gpt12_ick, - &gpt12_fck, - &mcbsp1_ick, - &mcbsp1_fck, - &mcbsp2_ick, - &mcbsp2_fck, - &mcbsp3_ick, - &mcbsp3_fck, - &mcbsp4_ick, - &mcbsp4_fck, - &mcbsp5_ick, - &mcbsp5_fck, - &mcspi1_ick, - &mcspi1_fck, - &mcspi2_ick, - &mcspi2_fck, - &mcspi3_ick, - &mcspi3_fck, - &uart1_ick, - &uart1_fck, - &uart2_ick, - &uart2_fck, - &uart3_ick, - &uart3_fck, - &gpios_ick, - &gpios_fck, - &mpu_wdt_ick, - &mpu_wdt_fck, - &sync_32k_ick, - &wdt1_ick, - &omapctrl_ick, - &icr_ick, - &cam_fck, - &cam_ick, - &mailboxes_ick, - &wdt4_ick, - &wdt4_fck, - &wdt3_ick, - &wdt3_fck, - &mspro_ick, - &mspro_fck, - &mmc_ick, - &mmc_fck, - &fac_ick, - &fac_fck, - &eac_ick, - &eac_fck, - &hdq_ick, - &hdq_fck, - &i2c1_ick, - &i2c1_fck, - &i2chs1_fck, - &i2c2_ick, - &i2c2_fck, - &i2chs2_fck, - &gpmc_fck, - &sdma_fck, - &sdma_ick, - &vlynq_ick, - &vlynq_fck, - &sdrc_ick, - &des_ick, - &sha_ick, - &rng_ick, - &aes_ick, - &pka_ick, - &usb_fck, - &usbhs_ick, - &mmchs1_ick, - &mmchs1_fck, - &mmchs2_ick, - &mmchs2_fck, - &gpio5_ick, - &gpio5_fck, - &mdm_intc_ick, - &mmchsdb1_fck, - &mmchsdb2_fck, -}; - #endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index fc7b683..9037213 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -16,6 +16,7 @@ config ARCH_OMAP1 config ARCH_OMAP2 bool "TI OMAP2" select CPU_V6 + select COMMON_CLKDEV config ARCH_OMAP3 bool "TI OMAP3" diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 2af4bc2..214dc46 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -136,9 +136,7 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-24 are currently free */ -#define CLOCK_IN_OMAP242X (1 << 25) -#define CLOCK_IN_OMAP243X (1 << 26) +/* bits 13-26 are currently free */ #define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ #define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ #define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ -- cgit v0.10.2 From 44dc9d027f1cb56625b1011d8725d2ab614c04e6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 15:51:11 +0000 Subject: [ARM] omap: convert OMAP3 to use clkdev Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 52698fb..2c22750 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "memory.h" #include "clock.h" @@ -42,6 +43,240 @@ static const struct clkops clkops_noncore_dpll_ops; #include "clock34xx.h" +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_343X (1 << 0) +#define CK_3430ES1 (1 << 1) +#define CK_3430ES2 (1 << 2) + +static struct omap_clk omap34xx_clks[] = { + CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), + CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), + CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), + CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), + CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), + CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), + CLK(NULL, "sys_ck", &sys_ck, CK_343X), + CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), + CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), + CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), + CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), + CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), + CLK(NULL, "core_ck", &core_ck, CK_343X), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), + CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), + CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), + CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), + CLK(NULL, "virt_omap_54m_fck", &virt_omap_54m_fck, CK_343X), + CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), + CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), + CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), + CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), + CLK(NULL, "omap_120m_fck", &omap_120m_fck, CK_3430ES2), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), + CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), + CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), + CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), + CLK(NULL, "arm_fck", &arm_fck, CK_343X), + CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), + CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), + CLK(NULL, "l3_ick", &l3_ick, CK_343X), + CLK(NULL, "l4_ick", &l4_ick, CK_343X), + CLK(NULL, "rm_ick", &rm_ick, CK_343X), + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), + CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), + CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), + CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), + CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), + CLK("mmci-omap-hs.2", "mmchs_fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_343X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), + CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_343X), + CLK("i2c_omap.3", "i2c_fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "i2c_fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "i2c_fck", &i2c1_fck, CK_343X), + CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck, CK_343X), + CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), + CLK("omap2_mcspi.4", "mcspi_fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck, CK_343X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), + CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), + CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), + CLK(NULL, "hdq_fck", &hdq_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), + CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), + CLK(NULL, "pka_ick", &pka_ick, CK_343X), + CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), + CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "mmchs_ick", &mmchs3_ick, CK_3430ES2), + CLK(NULL, "icr_ick", &icr_ick, CK_343X), + CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK(NULL, "des2_ick", &des2_ick, CK_343X), + CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_343X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), + CLK(NULL, "hdq_ick", &hdq_ick, CK_343X), + CLK("omap2_mcspi.4", "mcspi_ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick, CK_343X), + CLK("i2c_omap.3", "i2c_ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "i2c_ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "i2c_ick", &i2c1_ick, CK_343X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), + CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick, CK_343X), + CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), + CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), + CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), + CLK(NULL, "rng_ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), + CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), + CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), + CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), + CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), + CLK(NULL, "usbhost_sar_fck", &usbhost_sar_fck, CK_3430ES2), + CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), + CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), + CLK(NULL, "wdt2_fck", &wdt2_fck, CK_343X), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), + CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), + CLK(NULL, "wdt2_ick", &wdt2_ick, CK_343X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), + CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), + CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), + CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), + CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), + CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), + CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), + CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), + CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), + CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), + CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), + CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), + CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), + CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), + CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck, CK_343X), + CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X), + CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), + CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), + CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), + CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), + CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), + CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), + CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), + CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), +}; + /* CM_AUTOIDLE_PLL*.AUTO_* bit values */ #define DPLL_AUTOIDLE_DISABLE 0x0 #define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 @@ -453,26 +688,13 @@ arch_initcall(omap2_clk_arch_init); int __init omap2_clk_init(void) { /* struct prcm_config *prcm; */ - struct clk **clkp; + struct omap_clk *c; /* u32 clkrate; */ u32 cpu_clkflg; - /* REVISIT: Ultimately this will be used for multiboot */ -#if 0 - if (cpu_is_omap242x()) { - cpu_mask = RATE_IN_242X; - cpu_clkflg = CLOCK_IN_OMAP242X; - clkp = onchip_24xx_clks; - } else if (cpu_is_omap2430()) { - cpu_mask = RATE_IN_243X; - cpu_clkflg = CLOCK_IN_OMAP243X; - clkp = onchip_24xx_clks; - } -#endif if (cpu_is_omap34xx()) { cpu_mask = RATE_IN_343X; - cpu_clkflg = CLOCK_IN_OMAP343X; - clkp = onchip_34xx_clks; + cpu_clkflg = CK_343X; /* * Update this if there are further clock changes between ES2 @@ -480,23 +702,21 @@ int __init omap2_clk_init(void) */ if (omap_rev() == OMAP3430_REV_ES1_0) { /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ - cpu_clkflg |= CLOCK_IN_OMAP3430ES1; + cpu_clkflg |= CK_3430ES1; } else { cpu_mask |= RATE_IN_3430ES2; - cpu_clkflg |= CLOCK_IN_OMAP3430ES2; + cpu_clkflg |= CK_3430ES2; } } clk_init(&omap2_clk_functions); - for (clkp = onchip_34xx_clks; - clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks); - clkp++) { - if ((*clkp)->flags & cpu_clkflg) { - clk_register(*clkp); - omap2_init_clk_clkdm(*clkp); + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); } - } /* REVISIT: Not yet ready for OMAP3 */ #if 0 diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index dcacec8..6bd8c6d 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -57,14 +57,14 @@ static struct clk omap_32k_fck = { .name = "omap_32k_fck", .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk secure_32k_fck = { .name = "secure_32k_fck", .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; /* Virtual source clocks for osc_sys_ck */ @@ -72,42 +72,42 @@ static struct clk virt_12m_ck = { .name = "virt_12m_ck", .ops = &clkops_null, .rate = 12000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk virt_13m_ck = { .name = "virt_13m_ck", .ops = &clkops_null, .rate = 13000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk virt_16_8m_ck = { .name = "virt_16_8m_ck", .ops = &clkops_null, .rate = 16800000, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk virt_19_2m_ck = { .name = "virt_19_2m_ck", .ops = &clkops_null, .rate = 19200000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk virt_26m_ck = { .name = "virt_26m_ck", .ops = &clkops_null, .rate = 26000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", .ops = &clkops_null, .rate = 38400000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, }; static const struct clksel_rate osc_sys_12m_rates[] = { @@ -160,7 +160,7 @@ static struct clk osc_sys_ck = { .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, .clksel = osc_sys_clksel, /* REVISIT: deal with autoextclkmode? */ - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED | RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -185,21 +185,21 @@ static struct clk sys_ck = { .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, .clksel_mask = OMAP_SYSCLKDIV_MASK, .clksel = sys_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; static struct clk sys_altclk = { .name = "sys_altclk", .ops = &clkops_null, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, }; /* Optional external clock input for some McBSPs */ static struct clk mcbsp_clks = { .name = "mcbsp_clks", .ops = &clkops_null, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, }; /* PRM EXTERNAL CLOCK OUTPUT */ @@ -210,7 +210,6 @@ static struct clk sys_clkout1 = { .parent = &osc_sys_ck, .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -275,7 +274,7 @@ static struct clk dpll1_ck = { .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll1_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -288,7 +287,7 @@ static struct clk dpll1_x2_ck = { .name = "dpll1_x2_ck", .ops = &clkops_null, .parent = &dpll1_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -310,7 +309,7 @@ static struct clk dpll1_x2m2_ck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll1_x2m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -343,7 +342,7 @@ static struct clk dpll2_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll2_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -366,7 +365,7 @@ static struct clk dpll2_m2_ck = { OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll2_m2x2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -396,7 +395,7 @@ static struct clk dpll3_ck = { .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll3_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -409,7 +408,7 @@ static struct clk dpll3_x2_ck = { .name = "dpll3_x2_ck", .ops = &clkops_null, .parent = &dpll3_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -466,7 +465,7 @@ static struct clk dpll3_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, .clksel = div31_dpll3m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -483,7 +482,7 @@ static struct clk core_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = core_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -500,7 +499,7 @@ static struct clk dpll3_m2x2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = dpll3_m2x2_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -519,7 +518,7 @@ static struct clk dpll3_m3_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL3_MASK, .clksel = div16_dpll3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -530,7 +529,7 @@ static struct clk dpll3_m3x2_ck = { .parent = &dpll3_m3_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -548,7 +547,7 @@ static struct clk emu_core_alwon_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = emu_core_alwon_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -579,7 +578,7 @@ static struct clk dpll4_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll4_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -593,7 +592,7 @@ static struct clk dpll4_x2_ck = { .name = "dpll4_x2_ck", .ops = &clkops_null, .parent = &dpll4_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap3_clkoutx2_recalc, }; @@ -611,7 +610,7 @@ static struct clk dpll4_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), .clksel_mask = OMAP3430_DIV_96M_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -622,7 +621,7 @@ static struct clk dpll4_m2x2_ck = { .parent = &dpll4_m2_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -640,7 +639,7 @@ static struct clk omap_96m_alwon_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = omap_96m_alwon_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -648,7 +647,7 @@ static struct clk omap_96m_fck = { .name = "omap_96m_fck", .ops = &clkops_null, .parent = &omap_96m_alwon_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -666,7 +665,7 @@ static struct clk cm_96m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = cm_96m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -679,7 +678,7 @@ static struct clk dpll4_m3_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_TV_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -691,7 +690,7 @@ static struct clk dpll4_m3x2_ck = { .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -709,7 +708,7 @@ static struct clk virt_omap_54m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = virt_omap_54m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -736,7 +735,7 @@ static struct clk omap_54m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_54M, .clksel = omap_54m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -763,7 +762,7 @@ static struct clk omap_48m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_48M, .clksel = omap_48m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -772,7 +771,7 @@ static struct clk omap_12m_fck = { .ops = &clkops_null, .parent = &omap_48m_fck, .fixed_div = 4, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_fixed_divisor_recalc, }; @@ -785,7 +784,7 @@ static struct clk dpll4_m4_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -796,7 +795,7 @@ static struct clk dpll4_m4x2_ck = { .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -809,7 +808,7 @@ static struct clk dpll4_m5_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -820,7 +819,7 @@ static struct clk dpll4_m5x2_ck = { .parent = &dpll4_m5_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -833,7 +832,7 @@ static struct clk dpll4_m6_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL4_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -845,7 +844,7 @@ static struct clk dpll4_m6x2_ck = { .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = RATE_PROPAGATES | INVERT_ENABLE, .recalc = &omap3_clkoutx2_recalc, }; @@ -853,7 +852,7 @@ static struct clk emu_per_alwon_ck = { .name = "emu_per_alwon_ck", .ops = &clkops_null, .parent = &dpll4_m6x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -885,7 +884,7 @@ static struct clk dpll5_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll5_dd, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .recalc = &omap3_dpll_recalc, }; @@ -903,7 +902,7 @@ static struct clk dpll5_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), .clksel_mask = OMAP3430ES2_DIV_120M_MASK, .clksel = div16_dpll5_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -921,7 +920,7 @@ static struct clk omap_120m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .clksel = omap_120m_fck_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -964,7 +963,7 @@ static struct clk clkout2_src_ck = { .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, .clksel = clkout2_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -989,7 +988,6 @@ static struct clk sys_clkout2 = { .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, - .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_clksel_recalc, }; @@ -999,7 +997,7 @@ static struct clk corex2_fck = { .name = "corex2_fck", .ops = &clkops_null, .parent = &dpll3_m2x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1022,7 +1020,7 @@ static struct clk dpll1_fck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1046,7 +1044,7 @@ static struct clk mpu_ck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = mpu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "mpu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1071,7 +1069,7 @@ static struct clk arm_fck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = arm_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1085,7 +1083,7 @@ static struct clk emu_mpu_alwon_ck = { .name = "emu_mpu_alwon_ck", .ops = &clkops_null, .parent = &mpu_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1097,7 +1095,7 @@ static struct clk dpll2_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1125,7 +1123,7 @@ static struct clk iva2_ck = { OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, .clksel = iva2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "iva2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1140,7 +1138,7 @@ static struct clk l3_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L3_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1158,7 +1156,7 @@ static struct clk l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L4_MASK, .clksel = div2_l3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1177,7 +1175,6 @@ static struct clk rm_ick = { .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_RM_MASK, .clksel = div2_l4_clksel, - .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_clksel_recalc, }; @@ -1198,7 +1195,6 @@ static struct clk gfx_l3_ck = { .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &followparent_recalc, }; @@ -1210,7 +1206,7 @@ static struct clk gfx_l3_fck = { .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1219,7 +1215,6 @@ static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", .ops = &clkops_null, .parent = &gfx_l3_ck, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1231,7 +1226,6 @@ static struct clk gfx_cg1_ck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1243,7 +1237,6 @@ static struct clk gfx_cg2_ck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1277,7 +1270,6 @@ static struct clk sgx_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, .clksel = sgx_clksel, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "sgx_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1289,7 +1281,6 @@ static struct clk sgx_ick = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "sgx_clkdm", .recalc = &followparent_recalc, }; @@ -1303,7 +1294,6 @@ static struct clk d2d_26m_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "d2d_clkdm", .recalc = &followparent_recalc, }; @@ -1324,7 +1314,6 @@ static struct clk gpt10_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1339,7 +1328,6 @@ static struct clk gpt11_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1350,7 +1338,6 @@ static struct clk cpefuse_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; @@ -1360,7 +1347,6 @@ static struct clk ts_fck = { .parent = &omap_32k_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; @@ -1370,7 +1356,6 @@ static struct clk usbtll_fck = { .parent = &omap_120m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; @@ -1380,7 +1365,7 @@ static struct clk core_96m_fck = { .name = "core_96m_fck", .ops = &clkops_null, .parent = &omap_96m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1392,7 +1377,6 @@ static struct clk mmchs3_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1404,7 +1388,6 @@ static struct clk mmchs2_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1415,7 +1398,6 @@ static struct clk mspro_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1426,7 +1408,6 @@ static struct clk mmchs1_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1438,7 +1419,6 @@ static struct clk i2c3_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1450,7 +1430,6 @@ static struct clk i2c2_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1462,7 +1441,6 @@ static struct clk i2c1_fck = { .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1497,7 +1475,6 @@ static struct clk mcbsp5_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, .clksel = mcbsp_15_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1512,7 +1489,6 @@ static struct clk mcbsp1_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, .clksel = mcbsp_15_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1523,7 +1499,7 @@ static struct clk core_48m_fck = { .name = "core_48m_fck", .ops = &clkops_null, .parent = &omap_48m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1535,7 +1511,6 @@ static struct clk mcspi4_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1546,7 +1521,6 @@ static struct clk mcspi3_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1557,7 +1531,6 @@ static struct clk mcspi2_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1568,7 +1541,6 @@ static struct clk mcspi1_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1578,7 +1550,6 @@ static struct clk uart2_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1588,7 +1559,6 @@ static struct clk uart1_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1598,7 +1568,6 @@ static struct clk fshostusb_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &followparent_recalc, }; @@ -1608,7 +1577,7 @@ static struct clk core_12m_fck = { .name = "core_12m_fck", .ops = &clkops_null, .parent = &omap_12m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1619,7 +1588,6 @@ static struct clk hdq_fck = { .parent = &core_12m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1649,7 +1617,7 @@ static struct clk ssi_ssr_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, .clksel = ssi_ssr_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1659,7 +1627,6 @@ static struct clk ssi_sst_fck = { .ops = &clkops_null, .parent = &ssi_ssr_fck, .fixed_div = 2, - .flags = CLOCK_IN_OMAP343X, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1676,7 +1643,7 @@ static struct clk core_l3_ick = { .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1687,7 +1654,6 @@ static struct clk hsotgusb_ick = { .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1698,7 +1664,7 @@ static struct clk sdrc_ick = { .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1707,7 +1673,7 @@ static struct clk gpmc_fck = { .name = "gpmc_fck", .ops = &clkops_null, .parent = &core_l3_ick, - .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, /* huh? */ + .flags = ENABLE_ON_INIT, /* huh? */ .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1718,7 +1684,7 @@ static struct clk security_l3_ick = { .name = "security_l3_ick", .ops = &clkops_null, .parent = &l3_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1728,7 +1694,6 @@ static struct clk pka_ick = { .parent = &security_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_PKA_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1739,7 +1704,7 @@ static struct clk core_l4_ick = { .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1750,7 +1715,6 @@ static struct clk usbtll_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1762,7 +1726,6 @@ static struct clk mmchs3_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1774,7 +1737,6 @@ static struct clk icr_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_ICR_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1785,7 +1747,6 @@ static struct clk aes2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_AES2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1796,7 +1757,6 @@ static struct clk sha12_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1807,7 +1767,6 @@ static struct clk des2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_DES2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1819,7 +1778,6 @@ static struct clk mmchs2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1830,7 +1788,6 @@ static struct clk mmchs1_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1841,7 +1798,6 @@ static struct clk mspro_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1852,7 +1808,6 @@ static struct clk hdq_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1864,7 +1819,6 @@ static struct clk mcspi4_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1876,7 +1830,6 @@ static struct clk mcspi3_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1888,7 +1841,6 @@ static struct clk mcspi2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1900,7 +1852,6 @@ static struct clk mcspi1_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1912,7 +1863,6 @@ static struct clk i2c3_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1924,7 +1874,6 @@ static struct clk i2c2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1936,7 +1885,6 @@ static struct clk i2c1_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1947,7 +1895,6 @@ static struct clk uart2_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1958,7 +1905,6 @@ static struct clk uart1_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1969,7 +1915,6 @@ static struct clk gpt11_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1980,7 +1925,6 @@ static struct clk gpt10_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1992,7 +1936,6 @@ static struct clk mcbsp5_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2004,7 +1947,6 @@ static struct clk mcbsp1_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2015,7 +1957,6 @@ static struct clk fac_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2026,7 +1967,6 @@ static struct clk mailboxes_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2037,7 +1977,7 @@ static struct clk omapctrl_ick = { .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .recalc = &followparent_recalc, }; @@ -2047,7 +1987,7 @@ static struct clk ssi_l4_ick = { .name = "ssi_l4_ick", .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2058,7 +1998,6 @@ static struct clk ssi_ick = { .parent = &ssi_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2081,7 +2020,6 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &omap2_clksel_recalc, }; @@ -2093,7 +2031,7 @@ static struct clk security_l4_ick2 = { .name = "security_l4_ick2", .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2103,7 +2041,6 @@ static struct clk aes1_ick = { .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_AES1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -2113,7 +2050,6 @@ static struct clk rng_ick = { .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_RNG_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -2123,7 +2059,6 @@ static struct clk sha11_ick = { .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_SHA11_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -2133,7 +2068,6 @@ static struct clk des1_ick = { .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_DES1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -2154,7 +2088,6 @@ static struct clk dss1_alwon_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = dss1_alwon_fck_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2166,7 +2099,6 @@ static struct clk dss_tv_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2178,7 +2110,6 @@ static struct clk dss_96m_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2190,7 +2121,6 @@ static struct clk dss2_alwon_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2203,7 +2133,6 @@ static struct clk dss_ick = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2226,7 +2155,6 @@ static struct clk cam_mclk = { .clksel = cam_mclk_clksel, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "cam_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2239,7 +2167,6 @@ static struct clk cam_ick = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "cam_clkdm", .recalc = &followparent_recalc, }; @@ -2253,7 +2180,6 @@ static struct clk usbhost_120m_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2265,7 +2191,6 @@ static struct clk usbhost_48m_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2278,7 +2203,6 @@ static struct clk usbhost_ick = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2290,7 +2214,6 @@ static struct clk usbhost_sar_fck = { .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2330,7 +2253,6 @@ static struct clk usim_fck = { .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, .clksel = usim_clksel, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &omap2_clksel_recalc, }; @@ -2344,7 +2266,6 @@ static struct clk gpt1_fck = { .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2354,7 +2275,7 @@ static struct clk wkup_32k_fck = { .ops = &clkops_null, .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2365,7 +2286,6 @@ static struct clk gpio1_dbck = { .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2376,7 +2296,6 @@ static struct clk wdt2_fck = { .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2385,7 +2304,7 @@ static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", .ops = &clkops_null, .parent = &sys_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2398,7 +2317,6 @@ static struct clk usim_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2409,7 +2327,6 @@ static struct clk wdt2_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2420,7 +2337,6 @@ static struct clk wdt1_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2431,7 +2347,6 @@ static struct clk gpio1_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2442,7 +2357,6 @@ static struct clk omap_32ksync_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2454,7 +2368,6 @@ static struct clk gpt12_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2465,7 +2378,6 @@ static struct clk gpt1_ick = { .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2479,7 +2391,7 @@ static struct clk per_96m_fck = { .ops = &clkops_null, .parent = &omap_96m_alwon_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2489,7 +2401,7 @@ static struct clk per_48m_fck = { .ops = &clkops_null, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2500,7 +2412,6 @@ static struct clk uart3_fck = { .parent = &per_48m_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2514,7 +2425,6 @@ static struct clk gpt2_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2528,7 +2438,6 @@ static struct clk gpt3_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2542,7 +2451,6 @@ static struct clk gpt4_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2556,7 +2464,6 @@ static struct clk gpt5_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2570,7 +2477,6 @@ static struct clk gpt6_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2584,7 +2490,6 @@ static struct clk gpt7_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2598,7 +2503,6 @@ static struct clk gpt8_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2612,7 +2516,6 @@ static struct clk gpt9_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2622,7 +2525,7 @@ static struct clk per_32k_alwon_fck = { .ops = &clkops_null, .parent = &omap_32k_fck, .clkdm_name = "per_clkdm", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2632,7 +2535,6 @@ static struct clk gpio6_dbck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2643,7 +2545,6 @@ static struct clk gpio5_dbck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2654,7 +2555,6 @@ static struct clk gpio4_dbck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2665,7 +2565,6 @@ static struct clk gpio3_dbck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2676,7 +2575,6 @@ static struct clk gpio2_dbck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2687,7 +2585,6 @@ static struct clk wdt3_fck = { .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2696,7 +2593,7 @@ static struct clk per_l4_ick = { .name = "per_l4_ick", .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2707,7 +2604,6 @@ static struct clk gpio6_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2718,7 +2614,6 @@ static struct clk gpio5_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2729,7 +2624,6 @@ static struct clk gpio4_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2740,7 +2634,6 @@ static struct clk gpio3_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2751,7 +2644,6 @@ static struct clk gpio2_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2762,7 +2654,6 @@ static struct clk wdt3_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2773,7 +2664,6 @@ static struct clk uart3_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2784,7 +2674,6 @@ static struct clk gpt9_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2795,7 +2684,6 @@ static struct clk gpt8_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2806,7 +2694,6 @@ static struct clk gpt7_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2817,7 +2704,6 @@ static struct clk gpt6_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2828,7 +2714,6 @@ static struct clk gpt5_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2839,7 +2724,6 @@ static struct clk gpt4_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2850,7 +2734,6 @@ static struct clk gpt3_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2861,7 +2744,6 @@ static struct clk gpt2_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2873,7 +2755,6 @@ static struct clk mcbsp2_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2885,7 +2766,6 @@ static struct clk mcbsp3_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2897,7 +2777,6 @@ static struct clk mcbsp4_ick = { .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2918,7 +2797,6 @@ static struct clk mcbsp2_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2933,7 +2811,6 @@ static struct clk mcbsp3_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2948,7 +2825,6 @@ static struct clk mcbsp4_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2997,7 +2873,7 @@ static struct clk emu_src_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3022,7 +2898,7 @@ static struct clk pclk_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3046,7 +2922,7 @@ static struct clk pclkx2_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3063,7 +2939,7 @@ static struct clk atclk_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3075,7 +2951,7 @@ static struct clk traceclk_src_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3099,7 +2975,6 @@ static struct clk traceclk_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, .clksel = traceclk_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3113,7 +2988,7 @@ static struct clk sr1_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR1_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -3124,7 +2999,7 @@ static struct clk sr2_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR2_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -3132,7 +3007,6 @@ static struct clk sr_l4_ick = { .name = "sr_l4_ick", .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -3144,7 +3018,6 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -3152,223 +3025,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X, - .recalc = &followparent_recalc, -}; - -static struct clk *onchip_34xx_clks[] __initdata = { - &omap_32k_fck, - &virt_12m_ck, - &virt_13m_ck, - &virt_16_8m_ck, - &virt_19_2m_ck, - &virt_26m_ck, - &virt_38_4m_ck, - &osc_sys_ck, - &sys_ck, - &sys_altclk, - &mcbsp_clks, - &sys_clkout1, - &dpll1_ck, - &dpll1_x2_ck, - &dpll1_x2m2_ck, - &dpll2_ck, - &dpll2_m2_ck, - &dpll3_ck, - &core_ck, - &dpll3_x2_ck, - &dpll3_m2_ck, - &dpll3_m2x2_ck, - &dpll3_m3_ck, - &dpll3_m3x2_ck, - &emu_core_alwon_ck, - &dpll4_ck, - &dpll4_x2_ck, - &omap_96m_alwon_fck, - &omap_96m_fck, - &cm_96m_fck, - &virt_omap_54m_fck, - &omap_54m_fck, - &omap_48m_fck, - &omap_12m_fck, - &dpll4_m2_ck, - &dpll4_m2x2_ck, - &dpll4_m3_ck, - &dpll4_m3x2_ck, - &dpll4_m4_ck, - &dpll4_m4x2_ck, - &dpll4_m5_ck, - &dpll4_m5x2_ck, - &dpll4_m6_ck, - &dpll4_m6x2_ck, - &emu_per_alwon_ck, - &dpll5_ck, - &dpll5_m2_ck, - &omap_120m_fck, - &clkout2_src_ck, - &sys_clkout2, - &corex2_fck, - &dpll1_fck, - &mpu_ck, - &arm_fck, - &emu_mpu_alwon_ck, - &dpll2_fck, - &iva2_ck, - &l3_ick, - &l4_ick, - &rm_ick, - &gfx_l3_ck, - &gfx_l3_fck, - &gfx_l3_ick, - &gfx_cg1_ck, - &gfx_cg2_ck, - &sgx_fck, - &sgx_ick, - &d2d_26m_fck, - &gpt10_fck, - &gpt11_fck, - &cpefuse_fck, - &ts_fck, - &usbtll_fck, - &core_96m_fck, - &mmchs3_fck, - &mmchs2_fck, - &mspro_fck, - &mmchs1_fck, - &i2c3_fck, - &i2c2_fck, - &i2c1_fck, - &mcbsp5_fck, - &mcbsp1_fck, - &core_48m_fck, - &mcspi4_fck, - &mcspi3_fck, - &mcspi2_fck, - &mcspi1_fck, - &uart2_fck, - &uart1_fck, - &fshostusb_fck, - &core_12m_fck, - &hdq_fck, - &ssi_ssr_fck, - &ssi_sst_fck, - &core_l3_ick, - &hsotgusb_ick, - &sdrc_ick, - &gpmc_fck, - &security_l3_ick, - &pka_ick, - &core_l4_ick, - &usbtll_ick, - &mmchs3_ick, - &icr_ick, - &aes2_ick, - &sha12_ick, - &des2_ick, - &mmchs2_ick, - &mmchs1_ick, - &mspro_ick, - &hdq_ick, - &mcspi4_ick, - &mcspi3_ick, - &mcspi2_ick, - &mcspi1_ick, - &i2c3_ick, - &i2c2_ick, - &i2c1_ick, - &uart2_ick, - &uart1_ick, - &gpt11_ick, - &gpt10_ick, - &mcbsp5_ick, - &mcbsp1_ick, - &fac_ick, - &mailboxes_ick, - &omapctrl_ick, - &ssi_l4_ick, - &ssi_ick, - &usb_l4_ick, - &security_l4_ick2, - &aes1_ick, - &rng_ick, - &sha11_ick, - &des1_ick, - &dss1_alwon_fck, - &dss_tv_fck, - &dss_96m_fck, - &dss2_alwon_fck, - &dss_ick, - &cam_mclk, - &cam_ick, - &usbhost_120m_fck, - &usbhost_48m_fck, - &usbhost_ick, - &usbhost_sar_fck, - &usim_fck, - &gpt1_fck, - &wkup_32k_fck, - &gpio1_dbck, - &wdt2_fck, - &wkup_l4_ick, - &usim_ick, - &wdt2_ick, - &wdt1_ick, - &gpio1_ick, - &omap_32ksync_ick, - &gpt12_ick, - &gpt1_ick, - &per_96m_fck, - &per_48m_fck, - &uart3_fck, - &gpt2_fck, - &gpt3_fck, - &gpt4_fck, - &gpt5_fck, - &gpt6_fck, - &gpt7_fck, - &gpt8_fck, - &gpt9_fck, - &per_32k_alwon_fck, - &gpio6_dbck, - &gpio5_dbck, - &gpio4_dbck, - &gpio3_dbck, - &gpio2_dbck, - &wdt3_fck, - &per_l4_ick, - &gpio6_ick, - &gpio5_ick, - &gpio4_ick, - &gpio3_ick, - &gpio2_ick, - &wdt3_ick, - &uart3_ick, - &gpt9_ick, - &gpt8_ick, - &gpt7_ick, - &gpt6_ick, - &gpt5_ick, - &gpt4_ick, - &gpt3_ick, - &gpt2_ick, - &mcbsp2_ick, - &mcbsp3_ick, - &mcbsp4_ick, - &mcbsp2_fck, - &mcbsp3_fck, - &mcbsp4_fck, - &emu_src_ck, - &pclk_fck, - &pclkx2_fck, - &atclk_fck, - &traceclk_src_fck, - &traceclk_fck, - &sr1_fck, - &sr2_fck, - &sr_l4_ick, - &secure_32k_fck, - &gpt12_fck, - &wdt1_fck, + .recalc = &followparent_recalc, }; #endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 9037213..e25e1ac 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -21,6 +21,7 @@ config ARCH_OMAP2 config ARCH_OMAP3 bool "TI OMAP3" select CPU_V7 + select COMMON_CLKDEV endchoice diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 214dc46..3895ba7 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -136,10 +136,7 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-26 are currently free */ -#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ -#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ +/* bits 13-31 are currently free */ /* Clksel_rate flags */ #define DEFAULT_RATE (1 << 0) -- cgit v0.10.2 From 2b811bb56a008f0f669a1bd82e4d077e75aa059a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 16:28:32 +0000 Subject: [ARM] omap: remove pre-CLKDEV clk_get/clk_put Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 6b88f78..5272a22 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,45 +36,6 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -#ifndef CONFIG_COMMON_CLKDEV -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk * clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && strcmp(id, p->name) == 0) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); -#endif - int clk_enable(struct clk *clk) { unsigned long flags; @@ -147,13 +108,6 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -#ifndef CONFIG_COMMON_CLKDEV -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); -#endif - /*------------------------------------------------------------------------- * Optional clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -- cgit v0.10.2 From f1c2543738d18e4398e3d6e27abff6676667975a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 Jan 2009 22:34:09 +0000 Subject: [ARM] omap: provide a dummy clock node By providing a dummy clock node, we can eliminate the SoC conditional clock handing in the OMAP drivers, moving this knowledge out of the driver and into the machine clock support code. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 829b9b8..88c7163 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -33,6 +33,26 @@ static const struct clkops clkops_dspck; #include "clock.h" +static int clk_omap1_dummy_enable(struct clk *clk) +{ + return 0; +} + +static void clk_omap1_dummy_disable(struct clk *clk) +{ +} + +static const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, +}; + +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + struct omap_clk { u32 cpu; struct clk_lookup lk; -- cgit v0.10.2 From 39a80c7f379e1c1d3e63b204b8353b7381d0a3d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 20:44:33 +0000 Subject: [ARM] omap: watchdog: convert clocks to match by devid and conid This eliminates the need for separate OMAP24xx and OMAP34xx clock requesting code sections. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 88c7163..8ae7827 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -85,7 +85,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armwdt_ck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), /* CK_GEN2 clocks */ diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 36093ea..6a6278e 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -163,8 +163,8 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X | CK_242X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 2c22750..b3334b3 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -214,10 +214,10 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), - CLK(NULL, "wdt2_fck", &wdt2_fck, CK_343X), + CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), - CLK(NULL, "wdt2_ick", &wdt2_ick, CK_343X), + CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 2f2ce74..1a4c699 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -60,9 +60,8 @@ struct omap_wdt_dev { void __iomem *base; /* physical */ struct device *dev; int omap_wdt_users; - struct clk *armwdt_ck; - struct clk *mpu_wdt_ick; - struct clk *mpu_wdt_fck; + struct clk *ick; + struct clk *fck; struct resource *mem; struct miscdevice omap_wdt_miscdev; }; @@ -146,13 +145,9 @@ static int omap_wdt_open(struct inode *inode, struct file *file) if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) return -EBUSY; - if (cpu_is_omap16xx()) - clk_enable(wdev->armwdt_ck); /* Enable the clock */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - clk_enable(wdev->mpu_wdt_ick); /* Enable the interface clock */ - clk_enable(wdev->mpu_wdt_fck); /* Enable the functional clock */ - } + if (wdev->ick) + clk_enable(wdev->ick); /* Enable the interface clock */ + clk_enable(wdev->fck); /* Enable the functional clock */ /* initialize prescaler */ while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) @@ -181,13 +176,9 @@ static int omap_wdt_release(struct inode *inode, struct file *file) omap_wdt_disable(wdev); - if (cpu_is_omap16xx()) - clk_disable(wdev->armwdt_ck); /* Disable the clock */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - clk_disable(wdev->mpu_wdt_ick); /* Disable the clock */ - clk_disable(wdev->mpu_wdt_fck); /* Disable the clock */ - } + if (wdev->ick) + clk_disable(wdev->ick); + clk_disable(wdev->fck); #else printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); #endif @@ -303,44 +294,21 @@ static int __init omap_wdt_probe(struct platform_device *pdev) wdev->omap_wdt_users = 0; wdev->mem = mem; - if (cpu_is_omap16xx()) { - wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck"); - if (IS_ERR(wdev->armwdt_ck)) { - ret = PTR_ERR(wdev->armwdt_ck); - wdev->armwdt_ck = NULL; + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + wdev->ick = clk_get(&pdev->dev, "ick"); + if (IS_ERR(wdev->ick)) { + ret = PTR_ERR(wdev->ick); + wdev->ick = NULL; goto err_clk; } } - - if (cpu_is_omap24xx()) { - wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick"); - if (IS_ERR(wdev->mpu_wdt_ick)) { - ret = PTR_ERR(wdev->mpu_wdt_ick); - wdev->mpu_wdt_ick = NULL; - goto err_clk; - } - wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck"); - if (IS_ERR(wdev->mpu_wdt_fck)) { - ret = PTR_ERR(wdev->mpu_wdt_fck); - wdev->mpu_wdt_fck = NULL; - goto err_clk; - } + wdev->fck = clk_get(&pdev->dev, "fck"); + if (IS_ERR(wdev->fck)) { + ret = PTR_ERR(wdev->fck); + wdev->fck = NULL; + goto err_clk; } - if (cpu_is_omap34xx()) { - wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick"); - if (IS_ERR(wdev->mpu_wdt_ick)) { - ret = PTR_ERR(wdev->mpu_wdt_ick); - wdev->mpu_wdt_ick = NULL; - goto err_clk; - } - wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck"); - if (IS_ERR(wdev->mpu_wdt_fck)) { - ret = PTR_ERR(wdev->mpu_wdt_fck); - wdev->mpu_wdt_fck = NULL; - goto err_clk; - } - } wdev->base = ioremap(res->start, res->end - res->start + 1); if (!wdev->base) { ret = -ENOMEM; @@ -380,12 +348,10 @@ err_ioremap: wdev->base = NULL; err_clk: - if (wdev->armwdt_ck) - clk_put(wdev->armwdt_ck); - if (wdev->mpu_wdt_ick) - clk_put(wdev->mpu_wdt_ick); - if (wdev->mpu_wdt_fck) - clk_put(wdev->mpu_wdt_fck); + if (wdev->ick) + clk_put(wdev->ick); + if (wdev->fck) + clk_put(wdev->fck); kfree(wdev); err_kzalloc: @@ -417,20 +383,11 @@ static int omap_wdt_remove(struct platform_device *pdev) release_mem_region(res->start, res->end - res->start + 1); platform_set_drvdata(pdev, NULL); - if (wdev->armwdt_ck) { - clk_put(wdev->armwdt_ck); - wdev->armwdt_ck = NULL; + if (wdev->ick) { + clk_put(wdev->ick); } - if (wdev->mpu_wdt_ick) { - clk_put(wdev->mpu_wdt_ick); - wdev->mpu_wdt_ick = NULL; - } - - if (wdev->mpu_wdt_fck) { - clk_put(wdev->mpu_wdt_fck); - wdev->mpu_wdt_fck = NULL; - } + clk_put(wdev->fck); iounmap(wdev->base); kfree(wdev); -- cgit v0.10.2 From 4c5e1946b5f89c33e3bc8ed73fa7ba8f31e37cc5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 Jan 2009 12:48:37 +0000 Subject: [ARM] omap: watchdog: provide a dummy ick for OMAP1 Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 8ae7827..758abaa 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -86,6 +86,8 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), /* CK_GEN2 clocks */ diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 1a4c699..aa5ad6e 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -145,8 +145,7 @@ static int omap_wdt_open(struct inode *inode, struct file *file) if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) return -EBUSY; - if (wdev->ick) - clk_enable(wdev->ick); /* Enable the interface clock */ + clk_enable(wdev->ick); /* Enable the interface clock */ clk_enable(wdev->fck); /* Enable the functional clock */ /* initialize prescaler */ @@ -176,8 +175,7 @@ static int omap_wdt_release(struct inode *inode, struct file *file) omap_wdt_disable(wdev); - if (wdev->ick) - clk_disable(wdev->ick); + clk_disable(wdev->ick); clk_disable(wdev->fck); #else printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); @@ -294,13 +292,11 @@ static int __init omap_wdt_probe(struct platform_device *pdev) wdev->omap_wdt_users = 0; wdev->mem = mem; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - wdev->ick = clk_get(&pdev->dev, "ick"); - if (IS_ERR(wdev->ick)) { - ret = PTR_ERR(wdev->ick); - wdev->ick = NULL; - goto err_clk; - } + wdev->ick = clk_get(&pdev->dev, "ick"); + if (IS_ERR(wdev->ick)) { + ret = PTR_ERR(wdev->ick); + wdev->ick = NULL; + goto err_clk; } wdev->fck = clk_get(&pdev->dev, "fck"); if (IS_ERR(wdev->fck)) { @@ -383,10 +379,7 @@ static int omap_wdt_remove(struct platform_device *pdev) release_mem_region(res->start, res->end - res->start + 1); platform_set_drvdata(pdev, NULL); - if (wdev->ick) { - clk_put(wdev->ick); - } - + clk_put(wdev->ick); clk_put(wdev->fck); iounmap(wdev->base); -- cgit v0.10.2 From 5c9e02b1abcb227f47529ad72cc4a3234cddae49 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 20:53:30 +0000 Subject: [ARM] omap: MMC: convert clocks to match by devid and conid Convert OMAP MMC driver to match clocks using the device ID and a connection ID rather than a clock name. This allows us to eliminate the OMAP1/OMAP2 differences for the function clock. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 758abaa..3015e85 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -124,8 +124,8 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "mmc_ck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.1", "mmc_ck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "i2c_fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 6a6278e..aca4ca4 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -178,8 +178,8 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), - CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), - CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), CLK(NULL, "eac_ick", &eac_ick, CK_242X), diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 67d7b7f..15eb883 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1461,16 +1461,13 @@ static int __init mmc_omap_probe(struct platform_device *pdev) goto err_ioremap; if (cpu_is_omap24xx()) { - host->iclk = clk_get(&pdev->dev, "mmc_ick"); + host->iclk = clk_get(&pdev->dev, "ick"); if (IS_ERR(host->iclk)) goto err_free_mmc_host; clk_enable(host->iclk); } - if (!cpu_is_omap24xx()) - host->fclk = clk_get(&pdev->dev, "mmc_ck"); - else - host->fclk = clk_get(&pdev->dev, "mmc_fck"); + host->fclk = clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); -- cgit v0.10.2 From d4a36645a1a76e5294c1b00682fb849fc53ccd80 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 Jan 2009 19:03:37 +0000 Subject: [ARM] omap: MMC: provide a dummy ick for OMAP1 Eliminate the OMAP1 vs OMAP2 clock knowledge in the MMC driver. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 3015e85..61ace02 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -125,7 +125,9 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), CLK(NULL, "bclk", &bclk_16xx, CK_16XX), CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "i2c_fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 15eb883..5570849 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1460,15 +1460,12 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if (!host->virt_base) goto err_ioremap; - if (cpu_is_omap24xx()) { - host->iclk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(host->iclk)) - goto err_free_mmc_host; - clk_enable(host->iclk); - } + host->iclk = clk_get(&pdev->dev, "ick"); + if (IS_ERR(host->iclk)) + goto err_free_mmc_host; + clk_enable(host->iclk); host->fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); goto err_free_iclk; @@ -1533,10 +1530,10 @@ static int mmc_omap_remove(struct platform_device *pdev) if (host->pdata->cleanup) host->pdata->cleanup(&pdev->dev); - if (host->iclk && !IS_ERR(host->iclk)) - clk_put(host->iclk); - if (host->fclk && !IS_ERR(host->fclk)) - clk_put(host->fclk); + mmc_omap_fclk_enable(host, 0); + clk_put(host->fclk); + clk_disable(host->iclk); + clk_put(host->iclk); iounmap(host->virt_base); release_mem_region(pdev->resource[0].start, -- cgit v0.10.2 From 1b5715ec471d1def9722e22b6cb1d24841b5e290 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 20:49:37 +0000 Subject: [ARM] omap: mcspi: new short connection id names ... rather than the clock names themselves. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index aca4ca4..ac03803 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -149,12 +149,12 @@ static struct omap_clk omap24xx_clks[] = { CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck, CK_243X), CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick, CK_243X), CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index b3334b3..d0bfae5 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -147,10 +147,10 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_343X), CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck, CK_343X), CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), - CLK("omap2_mcspi.4", "mcspi_fck", &mcspi4_fck, CK_343X), - CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck, CK_343X), - CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck, CK_343X), - CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck, CK_343X), + CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), @@ -175,10 +175,10 @@ static struct omap_clk omap34xx_clks[] = { CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_343X), CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), CLK(NULL, "hdq_ick", &hdq_ick, CK_343X), - CLK("omap2_mcspi.4", "mcspi_ick", &mcspi4_ick, CK_343X), - CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick, CK_343X), - CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick, CK_343X), - CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick, CK_343X), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), CLK("i2c_omap.3", "i2c_ick", &i2c3_ick, CK_343X), CLK("i2c_omap.2", "i2c_ick", &i2c2_ick, CK_343X), CLK("i2c_omap.1", "i2c_ick", &i2c1_ick, CK_343X), diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 454a271..b91ee1a 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -1021,13 +1021,13 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) spin_lock_init(&mcspi->lock); INIT_LIST_HEAD(&mcspi->msg_queue); - mcspi->ick = clk_get(&pdev->dev, "mcspi_ick"); + mcspi->ick = clk_get(&pdev->dev, "ick"); if (IS_ERR(mcspi->ick)) { dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); status = PTR_ERR(mcspi->ick); goto err1a; } - mcspi->fck = clk_get(&pdev->dev, "mcspi_fck"); + mcspi->fck = clk_get(&pdev->dev, "fck"); if (IS_ERR(mcspi->fck)) { dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); status = PTR_ERR(mcspi->fck); -- cgit v0.10.2 From b820ce4e6736ddad7ccda528e10aaf37ad3f13f9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 Jan 2009 10:26:46 +0000 Subject: [ARM] omap: mcbsp: convert to use fck/ick clocks directly Rather than introducing a special 'mcbsp_clk' with code behind it in mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp driver to be like any other driver. mcbsp requests its fck and ick clocks directly, and the SoC specific code deals with selecting the correct clock. There is one oddity to deal with - OMAP1 fiddles with the DSP clocks and DSP reset, so we move this to the two callback functions. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 61ace02..b62da4c 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -132,6 +132,15 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "i2c_fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "i2c_ick", &i2c_ick, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), }; static int omap1_clk_enable_generic(struct clk * clk); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 575ba31..d040c3f 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -28,9 +28,9 @@ #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; -#endif +static int dsp_use; +static struct clk *api_clk; +static struct clk *dsp_clk; static void omap1_mcbsp_request(unsigned int id) { @@ -39,20 +39,40 @@ static void omap1_mcbsp_request(unsigned int id) * are DSP public peripherals. */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { - omap_dsp_request_mem(); - /* - * DSP external peripheral reset - * FIXME: This should be moved to dsp code - */ - __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN | - DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2); + if (dsp_use++ == 0) { + api_clk = clk_get(NULL, "api_clk"); + dsp_clk = clk_get(NULL, "dsp_clk"); + if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { + clk_enable(api_clk); + clk_enable(dsp_clk); + + omap_dsp_request_mem(); + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ + __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN | + DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2); + } + } } } static void omap1_mcbsp_free(unsigned int id) { - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) - omap_dsp_release_mem(); + if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (--dsp_use == 0) { + omap_dsp_release_mem(); + if (!IS_ERR(api_clk)) { + clk_disable(api_clk); + clk_put(api_clk); + } + if (!IS_ERR(dsp_clk)) { + clk_disable(dsp_clk); + clk_put(dsp_clk); + } + } + } } static struct omap_mcbsp_ops omap1_mcbsp_ops = { @@ -94,8 +114,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, { .phys_base = OMAP1510_MCBSP2_BASE, @@ -112,8 +130,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) @@ -131,8 +147,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, { .phys_base = OMAP1610_MCBSP2_BASE, @@ -149,8 +163,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index ac03803..ea21d55 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -139,16 +139,16 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_243X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index d0bfae5..a70aa2e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -144,8 +144,8 @@ static struct omap_clk omap34xx_clks[] = { CLK("i2c_omap.3", "i2c_fck", &i2c3_fck, CK_343X), CLK("i2c_omap.2", "i2c_fck", &i2c2_fck, CK_343X), CLK("i2c_omap.1", "i2c_fck", &i2c1_fck, CK_343X), - CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck, CK_343X), - CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck, CK_343X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), @@ -186,8 +186,8 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), - CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick, CK_343X), - CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick, CK_343X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), @@ -257,12 +257,12 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), - CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick, CK_343X), - CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick, CK_343X), - CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick, CK_343X), - CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck, CK_343X), - CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck, CK_343X), - CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck, CK_343X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X), CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a9e631f..a5c0f04 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -24,8 +24,6 @@ #include #include -const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; - static void omap2_mcbsp2_mux_setup(void) { omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); @@ -57,8 +55,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -67,8 +63,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -86,8 +80,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -96,8 +88,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -106,8 +96,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -116,8 +104,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -126,8 +112,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -145,8 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -155,8 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -165,8 +145,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -175,8 +153,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -185,8 +161,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 113c246..bb154ea 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -344,8 +344,6 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; - char const **clk_names; - int num_clks; }; struct omap_mcbsp { @@ -377,8 +375,8 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk **clks; - int num_clks; + struct clk *iclk; + struct clk *fclk; }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e5842e3..28b0a82 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -214,7 +214,6 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; int err; if (!omap_mcbsp_check_valid_id(id)) { @@ -223,23 +222,23 @@ int omap_mcbsp_request(unsigned int id) } mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) - mcbsp->pdata->ops->request(id); - - for (i = 0; i < mcbsp->num_clks; i++) - clk_enable(mcbsp->clks[i]); - spin_lock(&mcbsp->lock); if (!mcbsp->free) { dev_err(mcbsp->dev, "McBSP%d is currently in use\n", mcbsp->id); spin_unlock(&mcbsp->lock); - return -1; + return -EBUSY; } mcbsp->free = 0; spin_unlock(&mcbsp->lock); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(id); + + clk_enable(mcbsp->iclk); + clk_enable(mcbsp->fclk); + /* * Make sure that transmitter, receiver and sample-rate generator are * not running before activating IRQs. @@ -278,7 +277,6 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -289,8 +287,14 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) - clk_disable(mcbsp->clks[i]); + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { + /* Free IRQs */ + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); + } spin_lock(&mcbsp->lock); if (mcbsp->free) { @@ -302,12 +306,6 @@ void omap_mcbsp_free(unsigned int id) mcbsp->free = 1; spin_unlock(&mcbsp->lock); - - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* Free IRQs */ - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - } } EXPORT_SYMBOL(omap_mcbsp_free); @@ -876,7 +874,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; - int i; int ret = 0; if (!pdata) { @@ -899,7 +896,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) ret = -ENOMEM; goto exit; } - mcbsp_ptr[id] = mcbsp; spin_lock_init(&mcbsp->lock); mcbsp->id = id + 1; @@ -921,39 +917,32 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_rx_sync = pdata->dma_rx_sync; mcbsp->dma_tx_sync = pdata->dma_tx_sync; - if (pdata->num_clks) { - mcbsp->num_clks = pdata->num_clks; - mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *), - GFP_KERNEL); - if (!mcbsp->clks) { - ret = -ENOMEM; - goto exit; - } - for (i = 0; i < mcbsp->num_clks; i++) { - mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]); - if (IS_ERR(mcbsp->clks[i])) { - dev_err(&pdev->dev, - "Invalid %s configuration for McBSP%d.\n", - pdata->clk_names[i], mcbsp->id); - ret = PTR_ERR(mcbsp->clks[i]); - goto err_clk; - } - } + mcbsp->iclk = clk_get(&pdev->dev, "ick"); + if (IS_ERR(mcbsp->iclk)) { + ret = PTR_ERR(mcbsp->iclk); + dev_err(&pdev->dev, "unable to get ick: %d\n", ret); + goto err_iclk; + } + mcbsp->fclk = clk_get(&pdev->dev, "fck"); + if (IS_ERR(mcbsp->fclk)) { + ret = PTR_ERR(mcbsp->fclk); + dev_err(&pdev->dev, "unable to get fck: %d\n", ret); + goto err_fclk; } mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; + mcbsp_ptr[id] = mcbsp; platform_set_drvdata(pdev, mcbsp); return 0; -err_clk: - while (i--) - clk_put(mcbsp->clks[i]); - kfree(mcbsp->clks); +err_fclk: + clk_put(mcbsp->iclk); +err_iclk: iounmap(mcbsp->io_base); err_ioremap: - mcbsp->free = 0; + kfree(mcbsp); exit: return ret; } @@ -961,7 +950,6 @@ exit: static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - int i; platform_set_drvdata(pdev, NULL); if (mcbsp) { @@ -970,18 +958,15 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) { - clk_disable(mcbsp->clks[i]); - clk_put(mcbsp->clks[i]); - } + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + clk_put(mcbsp->fclk); + clk_put(mcbsp->iclk); iounmap(mcbsp->io_base); - if (mcbsp->num_clks) { - kfree(mcbsp->clks); - mcbsp->clks = NULL; - mcbsp->num_clks = 0; - } + mcbsp->fclk = NULL; + mcbsp->iclk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; } @@ -1002,4 +987,3 @@ int __init omap_mcbsp_init(void) /* Register the McBSP driver */ return platform_driver_register(&omap_mcbsp_driver); } - -- cgit v0.10.2 From 1d14de087dd1cab0436fb7c9d5e38d852f33df69 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 21:02:29 +0000 Subject: [ARM] omap: i2c: use short connection ids Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index b62da4c..382e09a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -130,8 +130,8 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "i2c_fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "i2c_ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index ea21d55..81c7b70 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -186,12 +186,12 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "eac_fck", &eac_fck, CK_242X), CLK(NULL, "hdq_ick", &hdq_ick, CK_243X | CK_242X), CLK(NULL, "hdq_fck", &hdq_fck, CK_243X | CK_242X), - CLK("i2c_omap.1", "i2c_ick", &i2c1_ick, CK_243X | CK_242X), - CLK("i2c_omap.1", "i2c_fck", &i2c1_fck, CK_242X), - CLK("i2c_omap.1", "i2c_fck", &i2chs1_fck, CK_243X), - CLK("i2c_omap.2", "i2c_ick", &i2c2_ick, CK_243X | CK_242X), - CLK("i2c_omap.2", "i2c_fck", &i2c2_fck, CK_242X), - CLK("i2c_omap.2", "i2c_fck", &i2chs2_fck, CK_243X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a70aa2e..859ad1d 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -141,9 +141,9 @@ static struct omap_clk omap34xx_clks[] = { CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_343X), CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_343X), - CLK("i2c_omap.3", "i2c_fck", &i2c3_fck, CK_343X), - CLK("i2c_omap.2", "i2c_fck", &i2c2_fck, CK_343X), - CLK("i2c_omap.1", "i2c_fck", &i2c1_fck, CK_343X), + CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), @@ -179,9 +179,9 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), - CLK("i2c_omap.3", "i2c_ick", &i2c3_ick, CK_343X), - CLK("i2c_omap.2", "i2c_ick", &i2c2_ick, CK_343X), - CLK("i2c_omap.1", "i2c_ick", &i2c1_ick, CK_343X), + CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index be8ee2c..19f86e1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -194,14 +194,14 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) { if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - dev->iclk = clk_get(dev->dev, "i2c_ick"); + dev->iclk = clk_get(dev->dev, "ick"); if (IS_ERR(dev->iclk)) { dev->iclk = NULL; return -ENODEV; } } - dev->fclk = clk_get(dev->dev, "i2c_fck"); + dev->fclk = clk_get(dev->dev, "fck"); if (IS_ERR(dev->fclk)) { if (dev->iclk != NULL) { clk_put(dev->iclk); -- cgit v0.10.2 From 0e9ae109e4eece027ede4f3f0edc8e659f8298c9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 22 Jan 2009 19:31:46 +0000 Subject: [ARM] omap: i2c: remove armxor_ck On OMAP1, the I2C functional clock (fck) is the armxor_ck, so there's no need to get "armxor_ck" separately. Signed-off-by: Russell King diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 19f86e1..96814fb 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -312,15 +312,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); if (cpu_class_is_omap1()) { - struct clk *armxor_ck; - - armxor_ck = clk_get(NULL, "armxor_ck"); - if (IS_ERR(armxor_ck)) - dev_warn(dev->dev, "Could not get armxor_ck\n"); - else { - fclk_rate = clk_get_rate(armxor_ck); - clk_put(armxor_ck); - } + /* + * The I2C functional clock is the armxor_ck, so there's + * no need to get "armxor_ck" separately. Now, if OMAP2420 + * always returns 12MHz for the functional clock, we can + * do this bit unconditionally. + */ + fclk_rate = clk_get_rate(dev->fclk); + /* TRM for 5912 says the I2C clock must be prescaled to be * between 7 - 12 MHz. The XOR input clock is typically * 12, 13 or 19.2 MHz. So we should have code that produces: -- cgit v0.10.2 From 5fe23380405d3a65ce6f46d270c4d3a31027430b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 Jan 2009 22:57:12 +0000 Subject: [ARM] omap: i2c: remove conditional ick clocks By providing a dummy ick for OMAP1510 and OMAP310, we avoid having SoC conditional clock information in i2c-omap.c. Also, fix the error handling by making sure we propagate the error returned via clk_get(). Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 382e09a..d2c6139 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -132,6 +132,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 96814fb..ece0125 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) { - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - dev->iclk = clk_get(dev->dev, "ick"); - if (IS_ERR(dev->iclk)) { - dev->iclk = NULL; - return -ENODEV; - } + int ret; + + dev->iclk = clk_get(dev->dev, "ick"); + if (IS_ERR(dev->iclk)) { + ret = PTR_ERR(dev->iclk); + dev->iclk = NULL; + return ret; } dev->fclk = clk_get(dev->dev, "fck"); if (IS_ERR(dev->fclk)) { + ret = PTR_ERR(dev->fclk); if (dev->iclk != NULL) { clk_put(dev->iclk); dev->iclk = NULL; } dev->fclk = NULL; - return -ENODEV; + return ret; } return 0; @@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) { clk_put(dev->fclk); dev->fclk = NULL; - if (dev->iclk != NULL) { - clk_put(dev->iclk); - dev->iclk = NULL; - } + clk_put(dev->iclk); + dev->iclk = NULL; } static void omap_i2c_unidle(struct omap_i2c_dev *dev) { WARN_ON(!dev->idle); - if (dev->iclk != NULL) - clk_enable(dev->iclk); + clk_enable(dev->iclk); clk_enable(dev->fclk); dev->idle = 0; if (dev->iestate) @@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) } dev->idle = 1; clk_disable(dev->fclk); - if (dev->iclk != NULL) - clk_disable(dev->iclk); + clk_disable(dev->iclk); } static int omap_i2c_init(struct omap_i2c_dev *dev) -- cgit v0.10.2 From cc51c9d444ae1532be6a600c65ac0d3d22472c53 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 22 Jan 2009 10:12:04 +0000 Subject: [ARM] omap: w1: convert omap HDQ clocks to match by devid and conid Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 81c7b70..f835880 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -184,8 +184,8 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), CLK(NULL, "eac_ick", &eac_ick, CK_242X), CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_243X | CK_242X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_243X | CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 859ad1d..1a4bc33 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -155,7 +155,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_343X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), @@ -174,7 +174,7 @@ static struct omap_clk omap34xx_clks[] = { CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_343X), CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_343X), CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_343X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index c973889..a7e3b70 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -590,8 +590,8 @@ static int __init omap_hdq_probe(struct platform_device *pdev) } /* get interface & functional clock objects */ - hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); - hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + hdq_data->hdq_ick = clk_get(&pdev->dev, "ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "fck"); if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); -- cgit v0.10.2 From b1ad379632327c0722c5c92275c326971da3b948 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 22 Jan 2009 19:41:20 +0000 Subject: [ARM] omap: spi: arrange for omap_uwire to use connection ID ... which now means no driver requests the "armxor_ck" clock directly. Also, fix the error handling for clk_get(), ensuring that we propagate the error returned from clk_get(). Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index d2c6139..7c45543 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -133,6 +133,7 @@ static struct omap_clk omap_clks[] = { CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index bab6ff0..394b616 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -506,11 +506,12 @@ static int __init uwire_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, uwire); - uwire->ck = clk_get(&pdev->dev, "armxor_ck"); - if (!uwire->ck || IS_ERR(uwire->ck)) { - dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n"); + uwire->ck = clk_get(&pdev->dev, "fck"); + if (IS_ERR(uwire->ck)) { + status = PTR_ERR(uwire->ck); + dev_dbg(&pdev->dev, "no functional clock?\n"); spi_master_put(master); - return -ENODEV; + return status; } clk_enable(uwire->ck); -- cgit v0.10.2 From eeec7c8d18465a85c212230bdb715e3f029dbf4e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Jan 2009 20:58:56 +0000 Subject: [ARM] omap: convert omap RNG clocks to match by devid and conid Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index f835880..1e9ac83 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -200,7 +200,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), - CLK(NULL, "rng_ick", &rng_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1a4bc33..07e3308 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -196,7 +196,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), - CLK(NULL, "rng_ick", &rng_ick, CK_343X), + CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index ba68a46..538313f 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) return -EBUSY; if (cpu_is_omap24xx()) { - rng_ick = clk_get(&pdev->dev, "rng_ick"); + rng_ick = clk_get(&pdev->dev, "ick"); if (IS_ERR(rng_ick)) { dev_err(&pdev->dev, "Could not get rng_ick\n"); ret = PTR_ERR(rng_ick); -- cgit v0.10.2 From 6c5dbb40f4795f3fdbf3e5aab7eda4e2f838d08b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 24 Jan 2009 16:27:06 +0000 Subject: [ARM] omap: omap24xxcam: use short connection IDs for omap2 clocks Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e9ac83..d190b6a 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -169,8 +169,8 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK(NULL, "cam_fck", &cam_fck, CK_243X | CK_242X), - CLK(NULL, "cam_ick", &cam_ick, CK_243X | CK_242X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index 73eb656..805faae 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c @@ -80,17 +80,17 @@ static int omap24xxcam_clock_get(struct omap24xxcam_device *cam) { int rval = 0; - cam->fck = clk_get(cam->dev, "cam_fck"); + cam->fck = clk_get(cam->dev, "fck"); if (IS_ERR(cam->fck)) { - dev_err(cam->dev, "can't get cam_fck"); + dev_err(cam->dev, "can't get camera fck"); rval = PTR_ERR(cam->fck); omap24xxcam_clock_put(cam); return rval; } - cam->ick = clk_get(cam->dev, "cam_ick"); + cam->ick = clk_get(cam->dev, "ick"); if (IS_ERR(cam->ick)) { - dev_err(cam->dev, "can't get cam_ick"); + dev_err(cam->dev, "can't get camera ick"); rval = PTR_ERR(cam->ick); omap24xxcam_clock_put(cam); } -- cgit v0.10.2 From 6f7607ccd175518a3ee7dccc1620f3a086689668 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 28 Jan 2009 10:22:50 +0000 Subject: [ARM] omap: hsmmc: new short connection id names ... rather than the clock names themselves. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index d190b6a..bd77ef2 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -205,10 +205,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 07e3308..245a7b9 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -137,10 +137,10 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), - CLK("mmci-omap-hs.2", "mmchs_fck", &mmchs3_fck, CK_3430ES2), - CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_343X), + CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), - CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_343X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), @@ -166,13 +166,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_343X), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), - CLK("mmci-omap-hs.2", "mmchs_ick", &mmchs3_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), CLK(NULL, "icr_ick", &icr_ick, CK_343X), CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), CLK(NULL, "des2_ick", &des2_ick, CK_343X), - CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_343X), - CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_343X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9730404..8075f58 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -349,11 +349,11 @@ static void __init omap_hsmmc_reset(void) dummy_pdev.id = i; dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i); - iclk = clk_get(dev, "mmchs_ick"); + iclk = clk_get(dev, "ick"); if (iclk && clk_enable(iclk)) iclk = NULL; - fclk = clk_get(dev, "mmchs_fck"); + fclk = clk_get(dev, "fck"); if (fclk && clk_enable(fclk)) fclk = NULL; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index db37490..65e0743 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -920,13 +920,13 @@ static int __init omap_mmc_probe(struct platform_device *pdev) sema_init(&host->sem, 1); - host->iclk = clk_get(&pdev->dev, "mmchs_ick"); + host->iclk = clk_get(&pdev->dev, "ick"); if (IS_ERR(host->iclk)) { ret = PTR_ERR(host->iclk); host->iclk = NULL; goto err1; } - host->fclk = clk_get(&pdev->dev, "mmchs_fck"); + host->fclk = clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); host->fclk = NULL; -- cgit v0.10.2 From 16c90f020034d3cd38b3dab280001e728e6b19e5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:12:47 -0700 Subject: [ARM] OMAP2/3: Add non-CORE DPLL rate set code and M, N programming Add non-CORE DPLL rate set code and M,N programming for OMAP3. Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework. You may see some warnings on rate sets from the freqsel code. The table that TI presented in the 3430 TRM Rev F does not cover Fint < 750000, which definitely occurs in practice. However, the lack of this freqsel case does not appear to impair the DPLL rate change. linux-omap source commit is 689fe67c6d1ad8f52f7f7b139a3274b79bf3e784. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 245a7b9..943ac63 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -340,6 +340,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) return ret; } +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->parent->rate / (n + 1); + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ /* @@ -476,7 +512,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk) if (clk == &dpll3_ck) return -EINVAL; - if (clk->parent->rate == clk_get_rate(clk)) + if (clk->parent->rate == omap2_get_dpll_rate(clk)) r = _omap3_noncore_dpll_bypass(clk); else r = _omap3_noncore_dpll_lock(clk); @@ -506,11 +542,110 @@ static void omap3_noncore_dpll_disable(struct clk *clk) _omap3_noncore_dpll_stop(clk); } + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + + /* Set mult (M), div1 (N), freqsel */ + v |= m << __ffs(dd->mult_mask); + v |= n << __ffs(dd->div1_mask); + v |= freqsel << __ffs(dd->freqsel_mask); + + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Program the DPLL with the rounded target rate. Returns -EINVAL upon + * error, or 0 upon success. + */ +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + u16 freqsel; + struct dpll_data *dd; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + + omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n, + freqsel); + + omap3_dpll_recalc(clk); + + return 0; +} + +static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) +{ + /* + * According to the 12-5 CDP code from TI, "Limitation 2.5" + * on 3430ES1 prevents us from changing DPLL multipliers or dividers + * on DPLL4. + */ + if (omap_rev() == OMAP3430_REV_ES1_0) { + printk(KERN_ERR "clock: DPLL4 cannot change rate due to " + "silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + return omap3_noncore_dpll_set_rate(clk, rate); +} + static const struct clkops clkops_noncore_dpll_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, }; +/* DPLL autoidle read/set code */ + + /** * omap3_dpll_autoidle_read - read a DPLL's autoidle bits * @clk: struct clk * of the DPLL to read diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 6bd8c6d..f811a09 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -32,6 +32,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); static void omap3_dpll_deny_idle(struct clk *clk); static u32 omap3_dpll_autoidle_read(struct clk *clk); +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); +static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); /* Maximum DPLL multiplier, divider values for OMAP3 */ #define OMAP3_MAX_DPLL_MULT 2048 @@ -254,6 +256,7 @@ static struct dpll_data dpll1_dd = { .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), @@ -276,6 +279,7 @@ static struct clk dpll1_ck = { .dpll_data = &dpll1_dd, .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -321,6 +325,7 @@ static struct dpll_data dpll2_dd = { .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | @@ -344,6 +349,7 @@ static struct clk dpll2_ck = { .dpll_data = &dpll2_dd, .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -378,6 +384,7 @@ static struct dpll_data dpll3_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, @@ -558,6 +565,7 @@ static struct dpll_data dpll4_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -580,6 +588,7 @@ static struct clk dpll4_ck = { .dpll_data = &dpll4_dd, .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_dpll4_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -864,6 +873,7 @@ static struct dpll_data dpll5_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -886,6 +896,7 @@ static struct clk dpll5_ck = { .dpll_data = &dpll5_dd, .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 3895ba7..f147aec 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -53,6 +53,7 @@ struct dpll_data { void __iomem *idlest_reg; u32 enable_mask; u32 autoidle_mask; + u32 freqsel_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; -- cgit v0.10.2 From fecb494beef09e4caaa80313834af26f57091195 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:12:50 -0700 Subject: [ARM] OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code Fix sparse & checkpatch warnings in OMAP2/3 PRCM & PM code. This mostly consists of: - converting pointer comparisons to integers in form similar to (ptr == 0) to the standard idiom (!ptr) - labeling a few non-static private functions as static - adding prototypes for *_init() functions in the appropriate header files, and getting rid of the corresponding open-coded extern prototypes in other C files - renaming the variable 'sclk' in mach-omap2/clock.c:omap2_get_apll_clkin to avoid shadowing an earlier declaration Clean up checkpatch issues. This mostly involves: - converting some asm/ includes to linux/ includes - cleaning up some whitespace - getting rid of braces for conditionals with single following statements Also take care of a few odds and ends, including: - getting rid of unlikely() and likely() - none of this code is particularly fast-path code, so the performance impact seems slim; and some of those likely() and unlikely() indicators are probably not as accurate as the ARM's branch predictor - removing some superfluous casts linux-omap source commit is 347df59f5d20fdf905afbc26b1328b0e28a8a01b. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 53fda99..886f73f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -26,7 +26,6 @@ #include #include -#include #include #include @@ -187,11 +186,10 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) * 24xx uses 0 to indicate not ready, and 1 to indicate ready. * 34xx reverses this, just to keep us on our toes */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) { + if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) ena = mask; - } else if (cpu_mask & RATE_IN_343X) { + else if (cpu_mask & RATE_IN_343X) ena = 0; - } /* Wait for lock */ while (((__raw_readl(reg) & mask) != ena) && @@ -267,7 +265,7 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk) { int ret; - if (unlikely(clk->enable_reg == NULL)) { + if (!clk->enable_reg) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ @@ -283,7 +281,7 @@ static void omap2_dflt_clk_disable(struct clk *clk) { u32 regval32; - if (clk->enable_reg == NULL) { + if (!clk->enable_reg) { /* * 'Independent' here refers to a clock which is not * controlled by its parent. @@ -330,7 +328,7 @@ void omap2_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { _omap2_clk_disable(clk); - if (likely((u32)clk->parent)) + if (clk->parent) omap2_clk_disable(clk->parent); if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); @@ -343,10 +341,10 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) + if (clk->parent) ret = omap2_clk_enable(clk->parent); - if (unlikely(ret != 0)) { + if (ret != 0) { clk->usecount--; return ret; } @@ -356,7 +354,7 @@ int omap2_clk_enable(struct clk *clk) ret = _omap2_clk_enable(clk); - if (unlikely(ret != 0)) { + if (ret != 0) { if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); @@ -384,7 +382,7 @@ void omap2_clksel_recalc(struct clk *clk) if (div == 0) return; - if (unlikely(clk->rate == clk->parent->rate / div)) + if (clk->rate == (clk->parent->rate / div)) return; clk->rate = clk->parent->rate / div; @@ -400,8 +398,8 @@ void omap2_clksel_recalc(struct clk *clk) * the element associated with the supplied parent clock address. * Returns a pointer to the struct clksel on success or NULL on error. */ -const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, - struct clk *src_clk) +static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, + struct clk *src_clk) { const struct clksel *clks; @@ -450,7 +448,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = 1; clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return ~0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -509,7 +507,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) /* Given a clock and a rate apply a clock specific rounding function */ long omap2_clk_round_rate(struct clk *clk, unsigned long rate) { - if (clk->round_rate != NULL) + if (clk->round_rate) return clk->round_rate(clk, rate); if (clk->flags & RATE_FIXED) @@ -535,7 +533,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) const struct clksel_rate *clkr; clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return 0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -571,7 +569,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) WARN_ON(div == 0); clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return 0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -596,9 +594,9 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) * * Returns the address of the clksel register upon success or NULL on error. */ -void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) +static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) { - if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL))) + if (!clk->clksel_reg || (clk->clksel_mask == 0)) return NULL; *field_mask = clk->clksel_mask; @@ -618,7 +616,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk) void __iomem *div_addr; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == NULL) + if (!div_addr) return 0; field_val = __raw_readl(div_addr) & field_mask; @@ -637,7 +635,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == NULL) + if (!div_addr) return -EINVAL; field_val = omap2_divisor_to_clksel(clk, new_div); @@ -675,7 +673,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ - if (clk->set_rate != NULL) + if (clk->set_rate) ret = clk->set_rate(clk, rate); return ret; @@ -696,7 +694,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, *src_addr = NULL; clks = omap2_get_clksel_by_parent(clk, src_clk); - if (clks == NULL) + if (!clks) return 0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -726,7 +724,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) void __iomem *src_addr; u32 field_val, field_mask, reg_val, parent_div; - if (unlikely(clk->flags & CONFIG_PARTICIPANT)) + if (clk->flags & CONFIG_PARTICIPANT) return -EINVAL; if (!clk->clksel) @@ -734,7 +732,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) field_val = omap2_clksel_get_src_field(&src_addr, new_parent, &field_mask, clk, &parent_div); - if (src_addr == NULL) + if (!src_addr) return -EINVAL; if (clk->usecount > 0) @@ -794,7 +792,8 @@ int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance) return 0; } -static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n) +static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, + unsigned int m, unsigned int n) { unsigned long long num; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b0358b6..90077f0 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -27,7 +27,7 @@ void omap2_clk_disable(struct clk *clk); long omap2_clk_round_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); -int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance); +int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance); long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate); #ifdef CONFIG_OMAP_RESET_CLOCKS diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index bd77ef2..91ad207 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -339,7 +339,7 @@ static const struct clkops clkops_fixed = { * Uses the current prcm set to tell if a rate is valid. * You can go slower, but not faster within a given rate set. */ -long omap2_dpllcore_round_rate(unsigned long target_rate) +static long omap2_dpllcore_round_rate(unsigned long target_rate) { u32 high, low, core_clk_src; @@ -550,7 +550,9 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) /* Major subsystem dividers */ tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1); + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + if (cpu_is_omap2430()) cm_write_mod_reg(prcm->cm_clksel_mdm, OMAP2430_MDM_MOD, CM_CLKSEL); @@ -582,20 +584,20 @@ static struct clk_functions omap2_clk_functions = { static u32 omap2_get_apll_clkin(void) { - u32 aplls, sclk = 0; + u32 aplls, srate = 0; aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); aplls &= OMAP24XX_APLLS_CLKIN_MASK; aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; if (aplls == APLLS_CLKIN_19_2MHZ) - sclk = 19200000; + srate = 19200000; else if (aplls == APLLS_CLKIN_13MHZ) - sclk = 13000000; + srate = 13000000; else if (aplls == APLLS_CLKIN_12MHZ) - sclk = 12000000; + srate = 12000000; - return sclk; + return srate; } static u32 omap2_get_sysclkdiv(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 55361c1..ea8ceae 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -103,7 +103,7 @@ static struct platform_suspend_ops omap_pm_ops = { .valid = suspend_valid_only_mem, }; -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { return 0; } diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f147aec..6f49a33 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -113,12 +113,12 @@ struct clk_functions { extern unsigned int mpurate; -extern int clk_init(struct clk_functions * custom_clocks); +extern int clk_init(struct clk_functions *custom_clocks); extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); -extern void followparent_recalc(struct clk * clk); +extern void followparent_recalc(struct clk *clk); extern int clk_get_usecount(struct clk *clk); extern void clk_enable_init_clocks(void); diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index 2806a9c..4948cb7 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -145,6 +145,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_pwrst(struct powerdomain *pwrdm); int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 56eba0f..24ac3c7 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -20,10 +20,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARM_ARCH_DPM_PRCM_H -#define __ASM_ARM_ARCH_DPM_PRCM_H +#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H +#define __ASM_ARM_ARCH_OMAP_PRCM_H u32 omap_prcm_get_reset_sources(void); +void omap_prcm_arch_reset(char mode); #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06923f2..e9b9563 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -9,12 +9,12 @@ #include #include +#include + #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) #endif -extern void omap_prcm_arch_reset(char mode); - static inline void arch_idle(void) { cpu_do_idle(); -- cgit v0.10.2 From 9299fd85a00a52b7c575fa02b3031ad407a15344 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:12:54 -0700 Subject: [ARM] OMAP24xx clock: add missing SSI L4 interface clock This patch adds a missing OMAP24xx clock, the SSI L4 interface clock, as "ssi_l4_ick". linux-omap source commit is ace129d39b3107d330d4cf6934385d13521f2fec. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 91ad207..421728a 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -112,6 +112,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), /* L4 domain clocks */ CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), /* virtual meta-group clock */ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), /* general l4 interface ck, multi-parent functional clk */ diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index b244247..32dd857 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -1276,6 +1276,20 @@ static struct clk ssi_ssr_sst_fck = { .set_rate = &omap2_clksel_set_rate }; +/* + * Presumably this is the same as SSI_ICLK. + * TRM contradicts itself on what clockdomain SSI_ICLK is in + */ +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l4_ck, + .clkdm_name = "core_l4_clkdm", + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP24XX_EN_SSI_SHIFT, + .recalc = &followparent_recalc, +}; + /* * GFX clock domain -- cgit v0.10.2 From 207233533dd197457634810c6dc1b5d65ab6b8c7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:12:57 -0700 Subject: [ARM] OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer Remove usbhost_sar_fclk from the OMAP3 clock framework. The bit that the clock was tweaking doesn't actually enable or disable a clock; it controls whether the hardware will save and restore USBHOST state when the powerdomain changes state. (That happens to coincidentally enable a clock for the duration of the operation, hence the earlier confusion.) In place of the clock, mark the USBHOST powerdomain as supporting hardware save-and-restore functionality. linux-omap source commit is f3ceac86a9d425d101d606d87a5af44afef27179. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 943ac63..439a669 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -209,7 +209,6 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), - CLK(NULL, "usbhost_sar_fck", &usbhost_sar_fck, CK_3430ES2), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index f811a09..a2dcf57 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2218,17 +2218,6 @@ static struct clk usbhost_ick = { .recalc = &followparent_recalc, }; -static struct clk usbhost_sar_fck = { - .name = "usbhost_sar_fck", - .ops = &clkops_omap2_dflt, - .parent = &osc_sys_ck, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), - .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - /* WKUP */ static const struct clksel_rate usim_96m_rates[] = { diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index f573f71..3a8e4fb 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -312,6 +312,7 @@ static struct powerdomain usbhost_pwrdm = { .sleepdep_srcs = dss_per_usbhost_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, + .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */ .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ -- cgit v0.10.2 From 9cfd985e27bfdf1e120aecaf595db265f4b5eb27 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:13:02 -0700 Subject: [ARM] OMAP3 clock: fix 96MHz clocks Fix some bugs in the OMAP3 clock tree pertaining to the 96MHz clocks. The 96MHz portion of the clock tree should now have reasonable fidelity to the 34xx TRM Rev I. One remaining question mark: it's not clear exactly which 96MHz source clock the USIM uses. This patch sticks with the previous setting, which seems reasonable. linux-omap source commit is 15c706e8179ce238c3ba70a25846a36b73bd2359. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index a2dcf57..2c84717 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -640,6 +640,12 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = { { .parent = NULL } }; +/* + * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as + * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: + * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and + * CM_96K_(F)CLK. + */ static struct clk omap_96m_alwon_fck = { .name = "omap_96m_alwon_fck", .ops = &clkops_null, @@ -652,28 +658,38 @@ static struct clk omap_96m_alwon_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk omap_96m_fck = { - .name = "omap_96m_fck", +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", .ops = &clkops_null, .parent = &omap_96m_alwon_fck, .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; -static const struct clksel cm_96m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, { .parent = NULL } }; -static struct clk cm_96m_fck = { - .name = "cm_96m_fck", +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", .ops = &clkops_null, - .parent = &dpll4_m2x2_ck, + .parent = &sys_ck, .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = cm_96m_fck_clksel, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_96M_MASK, + .clksel = omap_96m_fck_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -742,13 +758,13 @@ static struct clk omap_54m_fck = { .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M, + .clksel_mask = OMAP3430_SOURCE_54M_MASK, .clksel = omap_54m_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; -static const struct clksel_rate omap_48m_96md2_rates[] = { +static const struct clksel_rate omap_48m_cm96m_rates[] = { { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, { .div = 0 } }; @@ -759,7 +775,7 @@ static const struct clksel_rate omap_48m_alt_rates[] = { }; static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates }, + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, { .parent = NULL } }; @@ -769,7 +785,7 @@ static struct clk omap_48m_fck = { .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M, + .clksel_mask = OMAP3430_SOURCE_48M_MASK, .clksel = omap_48m_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, @@ -958,10 +974,10 @@ static const struct clksel_rate clkout2_src_54m_rates[] = { }; static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, { .parent = NULL } }; @@ -2782,8 +2798,8 @@ static struct clk mcbsp4_ick = { }; static const struct clksel mcbsp_234_clksel[] = { - { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 219f5c8..a46f93c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -449,8 +449,12 @@ #define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16) #define OMAP3430_CORE_DPLL_DIV_SHIFT 8 #define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8) -#define OMAP3430_SOURCE_54M (1 << 5) -#define OMAP3430_SOURCE_48M (1 << 3) +#define OMAP3430_SOURCE_96M_SHIFT 6 +#define OMAP3430_SOURCE_96M_MASK (1 << 6) +#define OMAP3430_SOURCE_54M_SHIFT 5 +#define OMAP3430_SOURCE_54M_MASK (1 << 5) +#define OMAP3430_SOURCE_48M_SHIFT 3 +#define OMAP3430_SOURCE_48M_MASK (1 << 3) /* CM_CLKSEL2_PLL */ #define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8 -- cgit v0.10.2 From 712d7c860269018fc92169e0f6b42218fd82a6d1 Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Tue, 27 Jan 2009 19:13:05 -0700 Subject: [ARM] OMAP2: Fix definition of SGX clock register bits The GFX/SGX functional and interface clocks have different masks, for some unknown reason, so split EN_SGX_SHIFT into one each for fclk and iclk. Correct according to the TRM and the far more important 'does this actually work at all?' metric. linux-omap source commit is de1121fdb899f762b9e717f44eaf3fae7c00cd3e. Signed-off-by: Daniel Stone Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 2c84717..6b39ad4 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1293,7 +1293,7 @@ static struct clk sgx_fck = { .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, + .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, .clksel = sgx_clksel, @@ -1307,7 +1307,7 @@ static struct clk sgx_ick = { .parent = &l3_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, + .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, .clkdm_name = "sgx_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index a46f93c..f3c327bac 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -332,8 +332,12 @@ #define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0) /* CM_FCLKEN_SGX */ -#define OMAP3430ES2_EN_SGX_SHIFT 1 -#define OMAP3430ES2_EN_SGX_MASK (1 << 1) +#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1 +#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK (1 << 1) + +/* CM_ICLKEN_SGX */ +#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0 +#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK (1 << 0) /* CM_CLKSEL_SGX */ #define OMAP3430ES2_CLKSEL_SGX_SHIFT 0 -- cgit v0.10.2 From 6c8fe0b954b198d8e9116b824f7998c00f47c46c Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Tue, 27 Jan 2009 19:13:09 -0700 Subject: [ARM] OMAP: Add CSI2 clock struct for handling it with clock API Add CSI2 clock struct for handling it with clock API when TI PM is disabled. linux-omap source commit is 8b20f4498928459276bd3366e3381ad595d23432. Signed-off-by: Sergio Aguirre Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 439a669..cb5e068 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -206,6 +206,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dss_ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 6b39ad4..c265cdc 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2198,6 +2198,17 @@ static struct clk cam_ick = { .recalc = &followparent_recalc, }; +static struct clk csi2_96m_fck = { + .name = "csi2_96m_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CSI2_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + /* USBHOST - 3430ES2 only */ static struct clk usbhost_120m_fck = { diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index f3c327bac..aaf68a5 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -524,6 +524,8 @@ #define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0) /* CM_FCLKEN_CAM specific bits */ +#define OMAP3430_EN_CSI2 (1 << 1) +#define OMAP3430_EN_CSI2_SHIFT 1 /* CM_ICLKEN_CAM specific bits */ -- cgit v0.10.2 From ae8578c0194695bd37435249dfed720769a6bbf3 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:13:12 -0700 Subject: [ARM] OMAP: Make dpll4_m4_ck programmable with clk_set_rate() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Filling the set_rate and round_rate fields of dpll4_m4_ck makes this clock programmable through clk_set_rate(). This is needed to give omapfb control over the dss1_alwon_fck rate. This patch includes a fix from Tomi Valkeinen . linux-omap source commits are e42218d45afbc3e654e289e021e6b80c657b16c2 and 9d211b761b3cdf7736602ecf7e68f8a298c13278. Signed-off-by: MÃ¥ns RullgÃ¥rd Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c265cdc..65929cc 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -811,6 +811,8 @@ static struct clk dpll4_m4_ck = { .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ -- cgit v0.10.2 From aeec299011da8c3f07a47fe5d988f0eafda53906 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 27 Jan 2009 19:13:38 -0700 Subject: [ARM] OMAP2: Implement CPUfreq frequency table based on PRCM table This patch adds a CPUfreq frequency-table implementation for OMAP2 by walking the PRCM rate-table for available entries and adding them to a CPUfreq table. CPUfreq can then be used to manage switching between all the available entries in the PRCM rate table. Either use the CPUfreq sysfs interface directly, (see Section 3 of Documentation/cpu-freq/user-guide.txt) or use the cpufrequtils package: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html Signed-off-by: Kevin Hilman Updated to try to use cpufreq_table if it exists. linux-omap source commit is 77ce544fa48deb7a2003f454624e3ca10d37ab87. Signed-off-by: Tony Lindgren Signed-off-by: Paul Walmsley Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 421728a..b990266 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -574,6 +574,45 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + */ +static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + struct prcm_config *prcm; + int i = 0; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + if (i == 0) { + printk(KERN_WARNING "%s: failed to initialize frequency " + "table\n", __func__); + return; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} +#endif + static struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, @@ -581,6 +620,9 @@ static struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, +#endif }; static u32 omap2_get_apll_clkin(void) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index b269024..843e8af 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -23,10 +23,13 @@ #include #include +#include #include #define VERY_HI_RATE 900000000 +static struct cpufreq_frequency_table *freq_table; + #ifdef CONFIG_ARCH_OMAP1 #define MPU_CLK "mpu" #else @@ -39,6 +42,9 @@ static struct clk *mpu_clk; int omap_verify_speed(struct cpufreq_policy *policy) { + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + if (policy->cpu) return -EINVAL; @@ -70,12 +76,26 @@ static int omap_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int ret = 0; + /* Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; freqs.cpu = 0; + if (freqs.old == freqs.new) + return ret; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - ret = clk_set_rate(mpu_clk, target_freq * 1000); +#ifdef CONFIG_CPU_FREQ_DEBUG + printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n", + freqs.old, freqs.new); +#endif + ret = clk_set_rate(mpu_clk, freqs.new * 1000); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); return ret; @@ -83,16 +103,31 @@ static int omap_target(struct cpufreq_policy *policy, static int __init omap_cpu_init(struct cpufreq_policy *policy) { + int result = 0; + mpu_clk = clk_get(NULL, MPU_CLK); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); if (policy->cpu != 0) return -EINVAL; + policy->cur = policy->min = policy->max = omap_getspeed(0); - policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; - policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + clk_init_cpufreq_table(&freq_table); + if (freq_table) { + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!result) + cpufreq_frequency_table_get_attr(freq_table, + policy->cpu); + } else { + policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; + policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, + VERY_HI_RATE) / 1000; + } + + /* FIXME: what's the actual transition time? */ + policy->cpuinfo.transition_latency = 10 * 1000 * 1000; return 0; } @@ -103,6 +138,11 @@ static int omap_cpu_exit(struct cpufreq_policy *policy) return 0; } +static struct freq_attr *omap_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY, .verify = omap_verify_speed, @@ -111,6 +151,7 @@ static struct cpufreq_driver omap_driver = { .init = omap_cpu_init, .exit = omap_cpu_exit, .name = "omap", + .attr = omap_cpufreq_attr, }; static int __init omap_cpufreq_init(void) @@ -119,3 +160,11 @@ static int __init omap_cpufreq_init(void) } arch_initcall(omap_cpufreq_init); + +/* + * if ever we want to remove this, upon cleanup call: + * + * cpufreq_unregister_driver() + * cpufreq_frequency_table_put_attr() + */ + diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 6f49a33..681c651 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -121,6 +121,9 @@ extern void recalculate_root_clocks(void); extern void followparent_recalc(struct clk *clk); extern int clk_get_usecount(struct clk *clk); extern void clk_enable_init_clocks(void); +#ifdef CONFIG_CPU_FREQ +extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +#endif extern const struct clkops clkops_null; -- cgit v0.10.2 From 5b74c67660dbd536a4f4e8cea12d10683ad2e432 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 3 Feb 2009 02:10:03 -0700 Subject: [ARM] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in struct clockdomain struct clockdomain contains a struct powerdomain *pwrdm and const char *pwrdm_name. The pwrdm_name is only used at initialization to look up the appropriate pwrdm pointer. Combining these into a union saves about 100 bytes on 3430SDP. This patch should not cause any change in kernel function. Updated to gracefully handle autodeps that contain invalid powerdomains, per Russell King's review comments. Boot-tested on BeagleBoard ES2.1. linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 4c3ce9c..e9b4f6c 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -22,6 +22,7 @@ #include #include #include +#include #include @@ -71,14 +72,14 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep) if (!omap_chip_is(autodep->omap_chip)) return; - pwrdm = pwrdm_lookup(autodep->pwrdm_name); + pwrdm = pwrdm_lookup(autodep->pwrdm.name); if (!pwrdm) { pr_debug("clockdomain: _autodep_lookup: powerdomain %s " - "does not exist\n", autodep->pwrdm_name); + "does not exist\n", autodep->pwrdm.name); WARN_ON(1); - return; + pwrdm = ERR_PTR(-ENOENT); } - autodep->pwrdm = pwrdm; + autodep->pwrdm.ptr = pwrdm; return; } @@ -95,16 +96,16 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm) { struct clkdm_pwrdm_autodep *autodep; - for (autodep = autodeps; autodep->pwrdm_name; autodep++) { - if (!autodep->pwrdm) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) { + if (IS_ERR(autodep->pwrdm.ptr)) continue; pr_debug("clockdomain: adding %s sleepdep/wkdep for " - "pwrdm %s\n", autodep->pwrdm_name, - clkdm->pwrdm->name); + "pwrdm %s\n", autodep->pwrdm.ptr->name, + clkdm->pwrdm.ptr->name); - pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm); - pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); + pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); } } @@ -120,16 +121,16 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm) { struct clkdm_pwrdm_autodep *autodep; - for (autodep = autodeps; autodep->pwrdm_name; autodep++) { - if (!autodep->pwrdm) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) { + if (IS_ERR(autodep->pwrdm.ptr)) continue; pr_debug("clockdomain: removing %s sleepdep/wkdep for " - "pwrdm %s\n", autodep->pwrdm_name, - clkdm->pwrdm->name); + "pwrdm %s\n", autodep->pwrdm.ptr->name, + clkdm->pwrdm.ptr->name); - pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm); - pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); + pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); } } @@ -179,7 +180,7 @@ void clkdm_init(struct clockdomain **clkdms, autodeps = init_autodeps; if (autodeps) - for (autodep = autodeps; autodep->pwrdm_name; autodep++) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) _autodep_lookup(autodep); } @@ -202,13 +203,13 @@ int clkdm_register(struct clockdomain *clkdm) if (!omap_chip_is(clkdm->omap_chip)) return -EINVAL; - pwrdm = pwrdm_lookup(clkdm->pwrdm_name); + pwrdm = pwrdm_lookup(clkdm->pwrdm.name); if (!pwrdm) { pr_debug("clockdomain: clkdm_register %s: powerdomain %s " - "does not exist\n", clkdm->name, clkdm->pwrdm_name); + "does not exist\n", clkdm->name, clkdm->pwrdm.name); return -EINVAL; } - clkdm->pwrdm = pwrdm; + clkdm->pwrdm.ptr = pwrdm; mutex_lock(&clkdm_mutex); /* Verify that the clockdomain is not already registered */ @@ -242,7 +243,7 @@ int clkdm_unregister(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; - pwrdm_del_clkdm(clkdm->pwrdm, clkdm); + pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm); mutex_lock(&clkdm_mutex); list_del(&clkdm->node); @@ -327,7 +328,7 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) if (!clkdm) return NULL; - return clkdm->pwrdm; + return clkdm->pwrdm.ptr; } @@ -348,7 +349,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; - v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); v &= clkdm->clktrctrl_mask; v >>= __ffs(clkdm->clktrctrl_mask); @@ -380,7 +381,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, - clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL); } else if (cpu_is_omap34xx()) { @@ -388,7 +389,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) __ffs(clkdm->clktrctrl_mask)); cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } else { BUG(); @@ -422,7 +423,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, - clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL); } else if (cpu_is_omap34xx()) { @@ -430,7 +431,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) __ffs(clkdm->clktrctrl_mask)); cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } else { BUG(); @@ -478,7 +479,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm->prcm_offs, + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } @@ -516,7 +517,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index cd86dcc..e17c369 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -19,7 +19,7 @@ /* This is an implicit clockdomain - it is never defined as such in TRM */ static struct clockdomain wkup_clkdm = { .name = "wkup_clkdm", - .pwrdm_name = "wkup_pwrdm", + .pwrdm = { .name = "wkup_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; @@ -31,7 +31,7 @@ static struct clockdomain wkup_clkdm = { static struct clockdomain mpu_2420_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), @@ -39,7 +39,7 @@ static struct clockdomain mpu_2420_clkdm = { static struct clockdomain iva1_2420_clkdm = { .name = "iva1_clkdm", - .pwrdm_name = "dsp_pwrdm", + .pwrdm = { .name = "dsp_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), @@ -56,7 +56,7 @@ static struct clockdomain iva1_2420_clkdm = { static struct clockdomain mpu_2430_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), @@ -64,7 +64,7 @@ static struct clockdomain mpu_2430_clkdm = { static struct clockdomain mdm_clkdm = { .name = "mdm_clkdm", - .pwrdm_name = "mdm_pwrdm", + .pwrdm = { .name = "mdm_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), @@ -81,7 +81,7 @@ static struct clockdomain mdm_clkdm = { static struct clockdomain dsp_clkdm = { .name = "dsp_clkdm", - .pwrdm_name = "dsp_pwrdm", + .pwrdm = { .name = "dsp_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -89,7 +89,7 @@ static struct clockdomain dsp_clkdm = { static struct clockdomain gfx_24xx_clkdm = { .name = "gfx_clkdm", - .pwrdm_name = "gfx_pwrdm", + .pwrdm = { .name = "gfx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -97,7 +97,7 @@ static struct clockdomain gfx_24xx_clkdm = { static struct clockdomain core_l3_24xx_clkdm = { .name = "core_l3_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -105,7 +105,7 @@ static struct clockdomain core_l3_24xx_clkdm = { static struct clockdomain core_l4_24xx_clkdm = { .name = "core_l4_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -113,7 +113,7 @@ static struct clockdomain core_l4_24xx_clkdm = { static struct clockdomain dss_24xx_clkdm = { .name = "dss_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -130,7 +130,7 @@ static struct clockdomain dss_24xx_clkdm = { static struct clockdomain mpu_34xx_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -138,7 +138,7 @@ static struct clockdomain mpu_34xx_clkdm = { static struct clockdomain neon_clkdm = { .name = "neon_clkdm", - .pwrdm_name = "neon_pwrdm", + .pwrdm = { .name = "neon_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -146,7 +146,7 @@ static struct clockdomain neon_clkdm = { static struct clockdomain iva2_clkdm = { .name = "iva2_clkdm", - .pwrdm_name = "iva2_pwrdm", + .pwrdm = { .name = "iva2_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -154,7 +154,7 @@ static struct clockdomain iva2_clkdm = { static struct clockdomain gfx_3430es1_clkdm = { .name = "gfx_clkdm", - .pwrdm_name = "gfx_pwrdm", + .pwrdm = { .name = "gfx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), @@ -162,7 +162,7 @@ static struct clockdomain gfx_3430es1_clkdm = { static struct clockdomain sgx_clkdm = { .name = "sgx_clkdm", - .pwrdm_name = "sgx_pwrdm", + .pwrdm = { .name = "sgx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), @@ -177,7 +177,7 @@ static struct clockdomain sgx_clkdm = { */ static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -185,7 +185,7 @@ static struct clockdomain d2d_clkdm = { static struct clockdomain core_l3_34xx_clkdm = { .name = "core_l3_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -193,7 +193,7 @@ static struct clockdomain core_l3_34xx_clkdm = { static struct clockdomain core_l4_34xx_clkdm = { .name = "core_l4_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -201,7 +201,7 @@ static struct clockdomain core_l4_34xx_clkdm = { static struct clockdomain dss_34xx_clkdm = { .name = "dss_clkdm", - .pwrdm_name = "dss_pwrdm", + .pwrdm = { .name = "dss_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -209,7 +209,7 @@ static struct clockdomain dss_34xx_clkdm = { static struct clockdomain cam_clkdm = { .name = "cam_clkdm", - .pwrdm_name = "cam_pwrdm", + .pwrdm = { .name = "cam_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -217,7 +217,7 @@ static struct clockdomain cam_clkdm = { static struct clockdomain usbhost_clkdm = { .name = "usbhost_clkdm", - .pwrdm_name = "usbhost_pwrdm", + .pwrdm = { .name = "usbhost_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), @@ -225,7 +225,7 @@ static struct clockdomain usbhost_clkdm = { static struct clockdomain per_clkdm = { .name = "per_clkdm", - .pwrdm_name = "per_pwrdm", + .pwrdm = { .name = "per_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -233,7 +233,7 @@ static struct clockdomain per_clkdm = { static struct clockdomain emu_clkdm = { .name = "emu_clkdm", - .pwrdm_name = "emu_pwrdm", + .pwrdm = { .name = "emu_pwrdm" }, .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -247,14 +247,16 @@ static struct clockdomain emu_clkdm = { static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { { - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }, { - .pwrdm_name = "iva2_pwrdm", + .pwrdm = { .name = "iva2_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }, - { NULL } + { + .pwrdm = { .name = NULL }, + } }; /* diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h index 1f51f01..b9d0dd2 100644 --- a/arch/arm/plat-omap/include/mach/clockdomain.h +++ b/arch/arm/plat-omap/include/mach/clockdomain.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-omap/clockdomain.h + * arch/arm/plat-omap/include/mach/clockdomain.h * * OMAP2/3 clockdomain framework functions * @@ -48,11 +48,13 @@ */ struct clkdm_pwrdm_autodep { - /* Name of the powerdomain to add a wkdep/sleepdep on */ - const char *pwrdm_name; + union { + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *name; - /* Powerdomain pointer (looked up at clkdm_init() time) */ - struct powerdomain *pwrdm; + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *ptr; + } pwrdm; /* OMAP chip types that this clockdomain dep is valid on */ const struct omap_chip_id omap_chip; @@ -64,8 +66,13 @@ struct clockdomain { /* Clockdomain name */ const char *name; - /* Powerdomain enclosing this clockdomain */ - const char *pwrdm_name; + union { + /* Powerdomain enclosing this clockdomain */ + const char *name; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *ptr; + } pwrdm; /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ const u16 clktrctrl_mask; @@ -79,9 +86,6 @@ struct clockdomain { /* Usecount tracking */ atomic_t usecount; - /* Powerdomain pointer assigned at clkdm_register() */ - struct powerdomain *pwrdm; - struct list_head node; }; -- cgit v0.10.2 From d37f1a136783aa9c9b1a6cd832a60cb2bbd2453a Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 10 Sep 2008 10:47:36 -0600 Subject: [ARM] OMAP2/3 clockdomains: add CM and PRM clkdms Add clockdomains for the CM and PRM. These will ultimately replace the "wkup_clkdm", which appears to not actually exist on the hardware. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index e17c369..ec5a720 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -14,6 +14,11 @@ /* * OMAP2/3-common clockdomains + * + * Even though the 2420 has a single PRCM module from the + * interconnect's perspective, internally it does appear to have + * separate PRM and CM clockdomains. The usual test case is + * sys_clkout/sys_clkout2. */ /* This is an implicit clockdomain - it is never defined as such in TRM */ @@ -23,6 +28,18 @@ static struct clockdomain wkup_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; +static struct clockdomain prm_clkdm = { + .name = "prm_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + +static struct clockdomain cm_clkdm = { + .name = "cm_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + /* * 2420-only clockdomains */ @@ -266,6 +283,8 @@ static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { static struct clockdomain *clockdomains_omap[] = { &wkup_clkdm, + &cm_clkdm, + &prm_clkdm, #ifdef CONFIG_ARCH_OMAP2420 &mpu_2420_clkdm, diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index 4948cb7..69c9e67 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -50,9 +50,9 @@ /* * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain is probably the worst case. + * CORE powerdomain on OMAP3 is the worst case */ -#define PWRDM_MAX_CLKDMS 3 +#define PWRDM_MAX_CLKDMS 4 /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 -- cgit v0.10.2 From 15b52bc4cb2b4cc93047b957a6c7b9dbd910a6fa Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 7 May 2008 19:19:07 -0600 Subject: [ARM] OMAP3 clock: move sys_clkout2 clk to core_clkdm sys_clkout2 belongs in the core_clkdm (3430 TRM section 4.7.2.2). It's not clear whether it actually is in the CORE clockdomain, or whether it is technically in a different clockdomain; but this is closer to reality than the present configuration. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 65929cc..baed53f 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -993,6 +993,7 @@ static struct clk clkout2_src_ck = { .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, .clksel = clkout2_src_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "core_clkdm", .recalc = &omap2_clksel_recalc, }; -- cgit v0.10.2 From 46e0ccf8ae32e53dc34a274977e2c6256b2deddc Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:44:18 -0700 Subject: [ARM] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains; mark clocks Each DPLL exists in its own powerdomain (cf 34xx TRM figure 4-18) and clockdomain; so, create powerdomain and clockdomain structures for them. Mark each DPLL clock as belonging to their respective DPLL clockdomain. cf. 34xx TRM Table 4-27 (among other references). linux-omap source commits are acdb615850b9b4f7d1ab68133a16be8c8c0e7419 and a8798a48f33e9268dcc7f30a4b4a3ce4220fe0c9. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index baed53f..9dec698 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -280,6 +280,7 @@ static struct clk dpll1_ck = { .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll1_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -292,6 +293,7 @@ static struct clk dpll1_x2_ck = { .ops = &clkops_null, .parent = &dpll1_ck, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll1_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -314,6 +316,7 @@ static struct clk dpll1_x2m2_ck = { .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll1_x2m2_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll1_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -350,6 +353,7 @@ static struct clk dpll2_ck = { .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll2_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -372,6 +376,7 @@ static struct clk dpll2_m2_ck = { .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll2_m2x2_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -404,6 +409,7 @@ static struct clk dpll3_ck = { .dpll_data = &dpll3_dd, .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -416,6 +422,7 @@ static struct clk dpll3_x2_ck = { .ops = &clkops_null, .parent = &dpll3_ck, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -473,6 +480,7 @@ static struct clk dpll3_m2_ck = { .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, .clksel = div31_dpll3m2_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -507,6 +515,7 @@ static struct clk dpll3_m2x2_ck = { .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = dpll3_m2x2_ck_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -526,6 +535,7 @@ static struct clk dpll3_m3_ck = { .clksel_mask = OMAP3430_DIV_DPLL3_MASK, .clksel = div16_dpll3_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -537,6 +547,7 @@ static struct clk dpll3_m3x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -555,6 +566,7 @@ static struct clk emu_core_alwon_ck = { .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = emu_core_alwon_ck_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -589,6 +601,7 @@ static struct clk dpll4_ck = { .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_dpll4_set_rate, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -602,6 +615,7 @@ static struct clk dpll4_x2_ck = { .ops = &clkops_null, .parent = &dpll4_ck, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -620,6 +634,7 @@ static struct clk dpll4_m2_ck = { .clksel_mask = OMAP3430_DIV_96M_MASK, .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -631,6 +646,7 @@ static struct clk dpll4_m2x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_96M_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -704,6 +720,7 @@ static struct clk dpll4_m3_ck = { .clksel_mask = OMAP3430_CLKSEL_TV_MASK, .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -716,6 +733,7 @@ static struct clk dpll4_m3x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_TV_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -810,6 +828,7 @@ static struct clk dpll4_m4_ck = { .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, .set_rate = &omap2_clksel_set_rate, .round_rate = &omap2_clksel_round_rate, @@ -823,6 +842,7 @@ static struct clk dpll4_m4x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -836,6 +856,7 @@ static struct clk dpll4_m5_ck = { .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -847,6 +868,7 @@ static struct clk dpll4_m5x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -860,6 +882,7 @@ static struct clk dpll4_m6_ck = { .clksel_mask = OMAP3430_DIV_DPLL4_MASK, .clksel = div16_dpll4_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -872,6 +895,7 @@ static struct clk dpll4_m6x2_ck = { .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, .flags = RATE_PROPAGATES | INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -880,6 +904,7 @@ static struct clk emu_per_alwon_ck = { .ops = &clkops_null, .parent = &dpll4_m6x2_ck, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll4_clkdm", .recalc = &followparent_recalc, }; @@ -915,6 +940,7 @@ static struct clk dpll5_ck = { .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll5_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -932,6 +958,7 @@ static struct clk dpll5_m2_ck = { .clksel_mask = OMAP3430ES2_DIV_120M_MASK, .clksel = div16_dpll5_clksel, .flags = RATE_PROPAGATES, + .clkdm_name = "dpll5_clkdm", .recalc = &omap2_clksel_recalc, }; diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index ec5a720..9eb7343 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -256,6 +256,36 @@ static struct clockdomain emu_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +static struct clockdomain dpll1_clkdm = { + .name = "dpll1_clkdm", + .pwrdm = { .name = "dpll1_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll2_clkdm = { + .name = "dpll2_clkdm", + .pwrdm = { .name = "dpll2_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll3_clkdm = { + .name = "dpll3_clkdm", + .pwrdm = { .name = "dpll3_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll4_clkdm = { + .name = "dpll4_clkdm", + .pwrdm = { .name = "dpll4_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll5_clkdm = { + .name = "dpll5_clkdm", + .pwrdm = { .name = "dpll5_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + #endif /* CONFIG_ARCH_OMAP34XX */ /* @@ -318,6 +348,11 @@ static struct clockdomain *clockdomains_omap[] = { &usbhost_clkdm, &per_clkdm, &emu_clkdm, + &dpll1_clkdm, + &dpll2_clkdm, + &dpll3_clkdm, + &dpll4_clkdm, + &dpll5_clkdm, #endif NULL, diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 1e151fa..1329443 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -178,6 +178,11 @@ static struct powerdomain *powerdomains_omap[] __initdata = { &emu_pwrdm, &sgx_pwrdm, &usbhost_pwrdm, + &dpll1_pwrdm, + &dpll2_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, #endif NULL diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 3a8e4fb..7b63fa0 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -322,6 +322,37 @@ static struct powerdomain usbhost_pwrdm = { }, }; +static struct powerdomain dpll1_pwrdm = { + .name = "dpll1_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll2_pwrdm = { + .name = "dpll2_pwrdm", + .prcm_offs = OMAP3430_IVA2_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll3_pwrdm = { + .name = "dpll3_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll4_pwrdm = { + .name = "dpll4_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll5_pwrdm = { + .name = "dpll5_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + + #endif /* CONFIG_ARCH_OMAP34XX */ -- cgit v0.10.2 From be48ea74d49408c5c4f999c730d35eaf0034f273 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:44:28 -0700 Subject: [ARM] OMAP3 powerdomains: remove RET from SGX power states list The SGX device on OMAP3 does not support retention, so remove RET from the list of possible SGX power states. Problem debugged by Richard Woodruff . Signed-off-by: Richard Woodruff Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 7b63fa0..15c346c 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -236,6 +236,11 @@ static struct powerdomain dss_pwrdm = { }, }; +/* + * Although the 34XX TRM Rev K Table 4-371 notes that retention is a + * possible SGX powerstate, the SGX device itself does not support + * retention. + */ static struct powerdomain sgx_pwrdm = { .name = "sgx_pwrdm", .prcm_offs = OMAP3430ES2_SGX_MOD, @@ -243,7 +248,7 @@ static struct powerdomain sgx_pwrdm = { .wkdep_srcs = gfx_sgx_wkdeps, .sleepdep_srcs = cam_gfx_sleepdeps, /* XXX This is accurate for 3430 SGX, but what about GFX? */ - .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts = PWRSTS_OFF_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, .banks = 1, .pwrsts_mem_ret = { -- cgit v0.10.2 From 054ce503ae335dbc8610ef5aa0852c0c090023fe Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 27 Jan 2009 19:44:31 -0700 Subject: [ARM] OMAP: wait for pwrdm transition after clk_enable() Enabling clock in a disabled power domain causes the power domain to be turned on. However, the power transition is not always finished when clk_enable() returns and this randomly crashes the kernel when an interrupt happens right after the clk_enable, and the kernel tries to read the irq status register for that domain. Why the irq status register is inaccessible, I don't know. Also it doesn't seem to be related to the module being not powered up, but to the transition itself. The same could perhaps happen after clk_disable also, but I have not witnessed that. The problem affects at least dss, cam and sgx clocks. This change waits for the transition to be finished before returning from omap2_clkdm_clk_enable(). Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index e9b4f6c..c9c367c 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -568,6 +568,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) else omap2_clkdm_wakeup(clkdm); + pwrdm_wait_transition(clkdm->pwrdm.ptr); + return 0; } -- cgit v0.10.2 From d96df00d6dfd2482fb23ef7aabcaa36e6dce4d1c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 27 Jan 2009 19:44:35 -0700 Subject: [ARM] OMAP2/3 clockdomains: autodeps should respect platform flags Fix the clockdomain autodep code to respect omap_chip platform flags. Resolves "Unable to handle kernel paging request at virtual address 5f75706d" panic during power management initialization on OMAP2. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index c9c367c..ae0c53a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -100,6 +100,9 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->pwrdm.ptr)) continue; + if (!omap_chip_is(autodep->omap_chip)) + continue; + pr_debug("clockdomain: adding %s sleepdep/wkdep for " "pwrdm %s\n", autodep->pwrdm.ptr->name, clkdm->pwrdm.ptr->name); @@ -125,6 +128,9 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->pwrdm.ptr)) continue; + if (!omap_chip_is(autodep->omap_chip)) + continue; + pr_debug("clockdomain: removing %s sleepdep/wkdep for " "pwrdm %s\n", autodep->pwrdm.ptr->name, clkdm->pwrdm.ptr->name); -- cgit v0.10.2 From f266950d0234599cc6d4a5602e43d0fb782de1d2 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Tue, 27 Jan 2009 19:44:38 -0700 Subject: [ARM] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use Using sdti doesn't keep emu_pwrdm on if hardware supervised pwrdm transitions are used. This causes sdti stop to work when power management is initialized and hardware supervised pwrdm control is enabled. This patch disables hardware supervised pwrdm control for emu_pwrdm. Now emu_pwrdm is switched off on boot by software when it is not used. Signed-off-by: Jouni Hogander Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 9eb7343..d7db796 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -248,10 +248,14 @@ static struct clockdomain per_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* + * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is + * switched of even if sdti is in use + */ static struct clockdomain emu_clkdm = { .name = "emu_clkdm", .pwrdm = { .name = "emu_pwrdm" }, - .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, + .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; -- cgit v0.10.2 From f0587b63c24e0c7539c6e77f1bfc68e6053608c7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:11 -0700 Subject: [ARM] OMAP3 clock: fix DPLL jitter correction and rate programming Fix DPLL jitter correction programming. Previously, omap3_noncore_dpll_program() stored the FREQSEL jitter correction parameter to the wrong register. This caused jitter correction to be set incorrectly and also caused the DPLL divider to be programmed incorrectly. Also, fix DPLL divider programming. An off-by-one error existed in omap3_noncore_dpll_program(), causing DPLLs to be programmed with a higher divider than intended. linux-omap source commit is 5c0ec88a2145cdf2f2c9cc5fae49635c4c2476c7. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index cb5e068..fdfc7d5 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -563,14 +563,17 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ _omap3_noncore_dpll_bypass(clk); + /* Set jitter correction */ + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + + /* Set DPLL multiplier, divider */ v = __raw_readl(dd->mult_div1_reg); v &= ~(dd->mult_mask | dd->div1_mask); - - /* Set mult (M), div1 (N), freqsel */ v |= m << __ffs(dd->mult_mask); - v |= n << __ffs(dd->div1_mask); - v |= freqsel << __ffs(dd->freqsel_mask); - + v |= (n - 1) << __ffs(dd->div1_mask); __raw_writel(v, dd->mult_div1_reg); /* We let the clock framework set the other output dividers later */ -- cgit v0.10.2 From b8168d1e3989bc141da6bba87ad49e218ff04658 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:14 -0700 Subject: [ARM] OMAP3 clock: DPLL{1,2}_FCLK clksel can divide by 4 OMAP34xx ES2 TRM Delta G to H states that the divider for DPLL1_FCLK and DPLL2_FCLK can divide by 4 in addition to dividing by 1 and 2. Encode this into the OMAP3 clock framework. linux-omap source commit is 050684c18f2ea0b08fdd5233a0cd3c7f96e00a0e. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 9dec698..f8088c0 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1060,8 +1060,15 @@ static struct clk corex2_fck = { /* DPLL power domain clock controls */ -static const struct clksel div2_core_clksel[] = { - { .parent = &core_ck, .rates = div2_rates }, +static const struct clksel_rate div4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel div4_core_clksel[] = { + { .parent = &core_ck, .rates = div4_rates }, { .parent = NULL } }; @@ -1076,7 +1083,7 @@ static struct clk dpll1_fck = { .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, - .clksel = div2_core_clksel, + .clksel = div4_core_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1151,7 +1158,7 @@ static struct clk dpll2_fck = { .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, - .clksel = div2_core_clksel, + .clksel = div4_core_clksel, .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1187,6 +1194,11 @@ static struct clk iva2_ck = { /* Common interface clocks */ +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + static struct clk l3_ick = { .name = "l3_ick", .ops = &clkops_null, -- cgit v0.10.2 From c1bd7aaf678a7e35086520e284d5b44bc69b6599 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:17 -0700 Subject: [ARM] OMAP3 clock: convert dpll_data.idlest_bit to idlest_mask Convert struct dpll_data.idlest_bit field to idlest_mask. Needed since OMAP2 uses two bits for DPLL IDLEST rather than one. While here, add the missing idlest_* fields for DPLL3. linux-omap source commits are 25bab0f176b0a97be18a1b38153f266c3a155784 and b0f7fd17db2aaf8e6e9a2732ae3f4de0874db01c. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index fdfc7d5..aad77e0 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -314,14 +314,12 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) const struct dpll_data *dd; int i = 0; int ret = -EINVAL; - u32 idlest_mask; dd = clk->dpll_data; - state <<= dd->idlest_bit; - idlest_mask = 1 << dd->idlest_bit; + state <<= __ffs(dd->idlest_mask); - while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) && + while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && i < MAX_DPLL_WAIT_TRIES) { i++; udelay(1); diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index f8088c0..7ee1312 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -266,7 +266,7 @@ static struct dpll_data dpll1_dd = { .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE @@ -339,7 +339,7 @@ static struct dpll_data dpll2_dd = { .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE @@ -397,6 +397,8 @@ static struct dpll_data dpll3_dd = { .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE @@ -587,7 +589,7 @@ static struct dpll_data dpll4_dd = { .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE @@ -926,7 +928,7 @@ static struct dpll_data dpll5_dd = { .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT, + .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 681c651..611df52 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -54,10 +54,10 @@ struct dpll_data { u32 enable_mask; u32 autoidle_mask; u32 freqsel_mask; + u32 idlest_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - u8 idlest_bit; # endif }; -- cgit v0.10.2 From b32450409847dddf060a468707212d3493df4f63 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:38 -0700 Subject: [ARM] OMAP3 clock: remove unnecessary dpll_data dereferences Remove some clutter from omap2_dpll_round_rate(). linux-omap source commit is 4625dceb8583c02a6d67ededc9f6a8347b6b8cb7. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 886f73f..2f0eaaa 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -877,19 +877,22 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) int m, n, r, e, scaled_max_m; unsigned long scaled_rt_rp, new_rate; int min_e = -1, min_e_m = -1, min_e_n = -1; + struct dpll_data *dd; if (!clk || !clk->dpll_data) return ~0; + dd = clk->dpll_data; + pr_debug("clock: starting DPLL round_rate for clock %s, target rate " "%ld\n", clk->name, target_rate); scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR); - scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR; + scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; - clk->dpll_data->last_rounded_rate = 0; + dd->last_rounded_rate = 0; - for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) { + for (n = dd->max_divider; n >= DPLL_MIN_DIVIDER; n--) { /* Compute the scaled DPLL multiplier, based on the divider */ m = scaled_rt_rp * n; @@ -909,7 +912,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) "(new_rate = %ld)\n", n, m, e, new_rate); if (min_e == -1 || - min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) { + min_e >= (int)(abs(e) - dd->rate_tolerance)) { min_e = e; min_e_m = m; min_e_n = n; @@ -932,17 +935,17 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) return ~0; } - clk->dpll_data->last_rounded_m = min_e_m; - clk->dpll_data->last_rounded_n = min_e_n; - clk->dpll_data->last_rounded_rate = - _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n); + dd->last_rounded_m = min_e_m; + dd->last_rounded_n = min_e_n; + dd->last_rounded_rate = _dpll_compute_new_rate(clk->parent->rate, + min_e_m, min_e_n); pr_debug("clock: final least error: e = %d, m = %d, n = %d\n", min_e, min_e_m, min_e_n); pr_debug("clock: final rate: %ld (target rate: %ld)\n", - clk->dpll_data->last_rounded_rate, target_rate); + dd->last_rounded_rate, target_rate); - return clk->dpll_data->last_rounded_rate; + return dd->last_rounded_rate; } /*------------------------------------------------------------------------- -- cgit v0.10.2 From 85a5f78d2b15a2e73b6486a24b77bb3ab67d5bbc Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:41 -0700 Subject: [ARM] OMAP3 clock: optimize DPLL rate rounding algorithm The previous DPLL rate rounding algorithm counted the divider (N) down from the maximum to 1. Since we currently use a broad DPLL rate tolerance, and lower N values are more power-efficient, we can often bypass several iterations through the loop by counting N upwards from 1. Peter de Schrijver put up with several test cycles of this patch - thanks Peter. linux-omap source commit is 6f6d82bb2f80fa20a841ac3e95a6f44a5a156188. Signed-off-by: Paul Walmsley Cc: Peter de Schrijver Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 2f0eaaa..76e20bc 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -45,7 +45,7 @@ #define DPLL_MIN_DIVIDER 1 /* Possible error results from _dpll_test_mult */ -#define DPLL_MULT_UNDERFLOW (1 << 0) +#define DPLL_MULT_UNDERFLOW -1 /* * Scale factor to mitigate roundoff errors in DPLL rate rounding. @@ -826,7 +826,7 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, unsigned long target_rate, unsigned long parent_rate) { - int flags = 0, carry = 0; + int r = 0, carry = 0; /* Unscale m and round if necessary */ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL) @@ -847,13 +847,13 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, if (*m < DPLL_MIN_MULTIPLIER) { *m = DPLL_MIN_MULTIPLIER; *new_rate = 0; - flags = DPLL_MULT_UNDERFLOW; + r = DPLL_MULT_UNDERFLOW; } if (*new_rate == 0) *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - return flags; + return r; } /** @@ -892,21 +892,27 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) dd->last_rounded_rate = 0; - for (n = dd->max_divider; n >= DPLL_MIN_DIVIDER; n--) { + for (n = DPLL_MIN_DIVIDER; n <= dd->max_divider; n++) { /* Compute the scaled DPLL multiplier, based on the divider */ m = scaled_rt_rp * n; /* - * Since we're counting n down, a m overflow means we can - * can immediately skip to the next n + * Since we're counting n up, a m overflow means we + * can bail out completely (since as n increases in + * the next iteration, there's no way that m can + * increase beyond the current m) */ if (m > scaled_max_m) - continue; + break; r = _dpll_test_mult(&m, n, &new_rate, target_rate, clk->parent->rate); + /* m can't be set low enough for this n - try with a larger n */ + if (r == DPLL_MULT_UNDERFLOW) + continue; + e = target_rate - new_rate; pr_debug("clock: n = %d: m = %d: rate error is %d " "(new_rate = %ld)\n", n, m, e, new_rate); @@ -918,16 +924,11 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) min_e_n = n; pr_debug("clock: found new least error %d\n", min_e); - } - /* - * Since we're counting n down, a m underflow means we - * can bail out completely (since as n decreases in - * the next iteration, there's no way that m can - * increase beyond the current m) - */ - if (r & DPLL_MULT_UNDERFLOW) - break; + /* We found good settings -- bail out now */ + if (min_e <= clk->dpll_data->rate_tolerance) + break; + } } if (min_e < 0) { -- cgit v0.10.2 From 95f538ac370d9625457ba00ef7c3bb91e2b92f89 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:44 -0700 Subject: [ARM] OMAP3 clock: avoid invalid FREQSEL values during DPLL rate rounding The DPLL FREQSEL jitter correction bits are set based on a table in the 34xx TRM, Table 4-38, according to the DPLL's internal clock frequency "Fint." Several Fint frequency ranges are missing from this table. Previously, we allowed these Fint frequency ranges to be selected in the rate rounding code, but did not change the FREQSEL bits. Correspondence with the OMAP hardware team indicates that Fint values not in the table should not be used. So, prevent them from being selected during DPLL rate rounding. This removes warnings and also can prevent the chip from locking up. The first pass through the rate rounding code will update the DPLL max and min dividers appropriately, so later rate rounding passes will run faster than the first. Peter de Schrijver put up with several test cycles of this patch - thanks Peter. linux-omap source commit is f9c1b82f55b60fc39eaa6e7aa1fbe380c0ffe2e9. Signed-off-by: Paul Walmsley Cc: Peter de Schrijver Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 76e20bc..752e347 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -58,12 +58,68 @@ #define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) +/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ +#define DPLL_FINT_BAND1_MIN 750000 +#define DPLL_FINT_BAND1_MAX 2100000 +#define DPLL_FINT_BAND2_MIN 7500000 +#define DPLL_FINT_BAND2_MAX 21000000 + +/* _dpll_test_fint() return codes */ +#define DPLL_FINT_UNDERFLOW -1 +#define DPLL_FINT_INVALID -2 + u8 cpu_mask; /*------------------------------------------------------------------------- * OMAP2/3 specific clock functions *-------------------------------------------------------------------------*/ +/* + * _dpll_test_fint - test whether an Fint value is valid for the DPLL + * @clk: DPLL struct clk to test + * @n: divider value (N) to test + * + * Tests whether a particular divider @n will result in a valid DPLL + * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter + * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate + * (assuming that it is counting N upwards), or -2 if the enclosing loop + * should skip to the next iteration (again assuming N is increasing). + */ +static int _dpll_test_fint(struct clk *clk, u8 n) +{ + struct dpll_data *dd; + long fint; + int ret = 0; + + dd = clk->dpll_data; + + /* DPLL divider must result in a valid jitter correction val */ + fint = clk->parent->rate / (n + 1); + if (fint < DPLL_FINT_BAND1_MIN) { + + pr_debug("rejecting n=%d due to Fint failure, " + "lowering max_divider\n", n); + dd->max_divider = n; + ret = DPLL_FINT_UNDERFLOW; + + } else if (fint > DPLL_FINT_BAND1_MAX && + fint < DPLL_FINT_BAND2_MIN) { + + pr_debug("rejecting n=%d due to Fint failure\n", n); + ret = DPLL_FINT_INVALID; + + } else if (fint > DPLL_FINT_BAND2_MAX) { + + pr_debug("rejecting n=%d due to Fint failure, " + "boosting min_divider\n", n); + dd->min_divider = n; + ret = DPLL_FINT_INVALID; + + } + + return ret; +} + /** * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk * @clk: OMAP clock struct ptr to use @@ -892,7 +948,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) dd->last_rounded_rate = 0; - for (n = DPLL_MIN_DIVIDER; n <= dd->max_divider; n++) { + for (n = dd->min_divider; n <= dd->max_divider; n++) { + + /* Is the (input clk, divider) pair valid for the DPLL? */ + r = _dpll_test_fint(clk, n); + if (r == DPLL_FINT_UNDERFLOW) + break; + else if (r == DPLL_FINT_INVALID) + continue; /* Compute the scaled DPLL multiplier, based on the divider */ m = scaled_rt_rp * n; @@ -926,7 +989,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) pr_debug("clock: found new least error %d\n", min_e); /* We found good settings -- bail out now */ - if (min_e <= clk->dpll_data->rate_tolerance) + if (min_e <= dd->rate_tolerance) break; } } diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 32dd857..7731ab6 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -666,6 +666,7 @@ static struct dpll_data dpll_dd = { .mult_mask = OMAP24XX_DPLL_MULT_MASK, .div1_mask = OMAP24XX_DPLL_DIV_MASK, .max_multiplier = 1024, + .min_divider = 1, .max_divider = 16, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 7ee1312..aadd296 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -268,6 +268,7 @@ static struct dpll_data dpll1_dd = { .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; @@ -341,6 +342,7 @@ static struct dpll_data dpll2_dd = { .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; @@ -400,6 +402,7 @@ static struct dpll_data dpll3_dd = { .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; @@ -591,6 +594,7 @@ static struct dpll_data dpll4_dd = { .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; @@ -930,6 +934,7 @@ static struct dpll_data dpll5_dd = { .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 611df52..cd69111 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -43,6 +43,7 @@ struct dpll_data { unsigned long last_rounded_rate; u16 last_rounded_m; u8 last_rounded_n; + u8 min_divider; u8 max_divider; u32 max_tolerance; u16 max_multiplier; -- cgit v0.10.2 From 416db864c18343c6dcc5e9768c902460c8f8777c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:08:46 -0700 Subject: [ARM] OMAP3 clock: disable DPLL autoidle while waiting for DPLL to lock During _omap3_noncore_dpll_lock(), if a DPLL has no active downstream clocks and DPLL autoidle is enabled, the DPLL may never lock, since it will enter autoidle immediately. To resolve this, disable DPLL autoidle while locking the DPLL, and unconditionally wait for the DPLL to lock. This fixes some bugs where the kernel would hang when returning from retention or return the wrong rate for the DPLL. This patch is a collaboration with Peter de Schrijver and Kevin Hilman . linux-omap source commit is 3b7de4be879f1f4f55ae59882a5cbd80f6dcf0f0. Signed-off-by: Paul Walmsley Cc: Peter de Schrijver Cc: Kevin Hilman Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index aad77e0..3d756ba 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -398,19 +398,14 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) ai = omap3_dpll_autoidle_read(clk); + omap3_dpll_deny_idle(clk); + _omap3_dpll_write_clken(clk, DPLL_LOCKED); - if (ai) { - /* - * If no downstream clocks are enabled, CM_IDLEST bit - * may never become active, so don't wait for DPLL to lock. - */ - r = 0; + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) omap3_dpll_allow_idle(clk); - } else { - r = _omap3_wait_dpll_status(clk, 1); - omap3_dpll_deny_idle(clk); - }; return r; } -- cgit v0.10.2 From ee1eec36345871955730e36232937c9d814a6e20 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:18:19 -0700 Subject: [ARM] OMAP2/3 clock: clean up mach-omap2/clock.c This patch rolls up several cleanup patches. 1. Some unnecessarily verbose variable names are used in several clock.c functions; clean these up per CodingStyle. 2. Remove omap2_get_clksel() and just use clk->clksel_reg and clk->clksel_mask directly. 3. Get rid of void __iomem * usage in omap2_clksel_get_src_field. Prepend the function name with an underscore to highlight that it is a static function. linux-omap source commits are 7fa95e007ea2f3c4d0ecd2779d809756e7775894, af0ea23f1ee4a5bea3b026e38761b47089f9048a, and 91c0c979b47c44b08f80e4f8d4c990fb158d82c4. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 752e347..5d7d4c5 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -298,7 +298,7 @@ static void omap2_clk_wait_ready(struct clk *clk) static int omap2_dflt_clk_enable(struct clk *clk) { - u32 regval32; + u32 v; if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", @@ -306,12 +306,12 @@ static int omap2_dflt_clk_enable(struct clk *clk) return 0; /* REVISIT: -EINVAL */ } - regval32 = __raw_readl(clk->enable_reg); + v = __raw_readl(clk->enable_reg); if (clk->flags & INVERT_ENABLE) - regval32 &= ~(1 << clk->enable_bit); + v &= ~(1 << clk->enable_bit); else - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); + v |= (1 << clk->enable_bit); + __raw_writel(v, clk->enable_reg); wmb(); return 0; @@ -335,7 +335,7 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk) static void omap2_dflt_clk_disable(struct clk *clk) { - u32 regval32; + u32 v; if (!clk->enable_reg) { /* @@ -347,12 +347,12 @@ static void omap2_dflt_clk_disable(struct clk *clk) return; } - regval32 = __raw_readl(clk->enable_reg); + v = __raw_readl(clk->enable_reg); if (clk->flags & INVERT_ENABLE) - regval32 |= (1 << clk->enable_bit); + v |= (1 << clk->enable_bit); else - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); + v &= ~(1 << clk->enable_bit); + __raw_writel(v, clk->enable_reg); wmb(); } @@ -644,23 +644,6 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) } /** - * omap2_get_clksel - find clksel register addr & field mask for a clk - * @clk: struct clk to use - * @field_mask: ptr to u32 to store the register field mask - * - * Returns the address of the clksel register upon success or NULL on error. - */ -static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) -{ - if (!clk->clksel_reg || (clk->clksel_mask == 0)) - return NULL; - - *field_mask = clk->clksel_mask; - - return clk->clksel_reg; -} - -/** * omap2_clksel_get_divisor - get current divider applied to parent clock. * @clk: OMAP struct clk to use. * @@ -668,40 +651,36 @@ static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) */ u32 omap2_clksel_get_divisor(struct clk *clk) { - u32 field_mask, field_val; - void __iomem *div_addr; + u32 v; - div_addr = omap2_get_clksel(clk, &field_mask); - if (!div_addr) + if (!clk->clksel_mask) return 0; - field_val = __raw_readl(div_addr) & field_mask; - field_val >>= __ffs(field_mask); + v = __raw_readl(clk->clksel_reg) & clk->clksel_mask; + v >>= __ffs(clk->clksel_mask); - return omap2_clksel_to_divisor(clk, field_val); + return omap2_clksel_to_divisor(clk, v); } int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) { - u32 field_mask, field_val, reg_val, validrate, new_div = 0; - void __iomem *div_addr; + u32 v, field_val, validrate, new_div = 0; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) + if (!clk->clksel_mask) return -EINVAL; - div_addr = omap2_get_clksel(clk, &field_mask); - if (!div_addr) + validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + if (validrate != rate) return -EINVAL; field_val = omap2_divisor_to_clksel(clk, new_div); if (field_val == ~0) return -EINVAL; - reg_val = __raw_readl(div_addr); - reg_val &= ~field_mask; - reg_val |= (field_val << __ffs(field_mask)); - __raw_writel(reg_val, div_addr); + v = __raw_readl(clk->clksel_reg); + v &= ~clk->clksel_mask; + v |= field_val << __ffs(clk->clksel_mask); + __raw_writel(v, clk->clksel_reg); wmb(); clk->rate = clk->parent->rate / new_div; @@ -737,18 +716,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) /* * Converts encoded control register address into a full address - * On error, *src_addr will be returned as 0. + * On error, the return value (parent_div) will be 0. */ -static u32 omap2_clksel_get_src_field(void __iomem **src_addr, - struct clk *src_clk, u32 *field_mask, - struct clk *clk, u32 *parent_div) +static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk, + u32 *field_val) { const struct clksel *clks; const struct clksel_rate *clkr; - *parent_div = 0; - *src_addr = NULL; - clks = omap2_get_clksel_by_parent(clk, src_clk); if (!clks) return 0; @@ -768,17 +743,14 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, /* Should never happen. Add a clksel mask to the struct clk. */ WARN_ON(clk->clksel_mask == 0); - *field_mask = clk->clksel_mask; - *src_addr = clk->clksel_reg; - *parent_div = clkr->div; + *field_val = clkr->val; - return clkr->val; + return clkr->div; } int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) { - void __iomem *src_addr; - u32 field_val, field_mask, reg_val, parent_div; + u32 field_val, v, parent_div; if (clk->flags & CONFIG_PARTICIPANT) return -EINVAL; @@ -786,18 +758,18 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) if (!clk->clksel) return -EINVAL; - field_val = omap2_clksel_get_src_field(&src_addr, new_parent, - &field_mask, clk, &parent_div); - if (!src_addr) + parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val); + if (!parent_div) return -EINVAL; if (clk->usecount > 0) _omap2_clk_disable(clk); /* Set new source value (previous dividers if any in effect) */ - reg_val = __raw_readl(src_addr) & ~field_mask; - reg_val |= (field_val << __ffs(field_mask)); - __raw_writel(reg_val, src_addr); + v = __raw_readl(clk->clksel_reg); + v &= ~clk->clksel_mask; + v |= field_val << __ffs(clk->clksel_mask); + __raw_writel(v, clk->clksel_reg); wmb(); if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { -- cgit v0.10.2 From 027d8ded5d1c142eb120caff7a395c0637467ac9 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Fri, 16 May 2008 13:58:18 +0300 Subject: [ARM] OMAP34XX: Add miscellaneous definitions related to 34xx Signed-off-by: Jouni Hogander Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index aaf68a5..844356c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -208,6 +208,10 @@ #define OMAP3430ES2_ST_USBTLL_MASK (1 << 2) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430ES2_AUTO_MMC3 (1 << 30) +#define OMAP3430ES2_AUTO_MMC3_SHIFT 30 +#define OMAP3430ES2_AUTO_ICR (1 << 29) +#define OMAP3430ES2_AUTO_ICR_SHIFT 29 #define OMAP3430_AUTO_AES2 (1 << 28) #define OMAP3430_AUTO_AES2_SHIFT 28 #define OMAP3430_AUTO_SHA12 (1 << 27) @@ -276,6 +280,9 @@ #define OMAP3430_AUTO_DES1_SHIFT 0 /* CM_AUTOIDLE3_CORE */ +#define OMAP3430ES2_AUTO_USBHOST (1 << 0) +#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0 +#define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 5b5ecfe..c6a7940 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -366,6 +366,7 @@ /* PM_WKEN_WKUP specific bits */ #define OMAP3430_EN_IO (1 << 8) +#define OMAP3430_EN_GPIO1 (1 << 3) /* PM_MPUGRPSEL_WKUP specific bits */ @@ -452,6 +453,14 @@ #define OMAP3430_CMDRA0_MASK (0xff << 0) /* PRM_VC_CMD_VAL_0 specific bits */ +#define OMAP3430_VC_CMD_ON_SHIFT 24 +#define OMAP3430_VC_CMD_ON_MASK (0xFF << 24) +#define OMAP3430_VC_CMD_ONLP_SHIFT 16 +#define OMAP3430_VC_CMD_ONLP_MASK (0xFF << 16) +#define OMAP3430_VC_CMD_RET_SHIFT 8 +#define OMAP3430_VC_CMD_RET_MASK (0xFF << 8) +#define OMAP3430_VC_CMD_OFF_SHIFT 0 +#define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0) /* PRM_VC_CMD_VAL_1 specific bits */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index e4dc4b1..826d326b8 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -141,6 +141,19 @@ #define PM_PWSTCTRL 0x00e0 #define PM_PWSTST 0x00e4 +/* Omap2 specific registers */ +#define OMAP24XX_PM_WKEN2 0x00a4 +#define OMAP24XX_PM_WKST2 0x00b4 + +#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ +#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ +#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 +#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc + +/* Omap3 specific registers */ +#define OMAP3430ES2_PM_WKEN3 0x00f0 +#define OMAP3430ES2_PM_WKST3 0x00b8 + #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL @@ -153,16 +166,6 @@ #define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc -/* Architecture-specific registers */ - -#define OMAP24XX_PM_WKEN2 0x00a4 -#define OMAP24XX_PM_WKST2 0x00b4 - -#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ -#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ -#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 -#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc - #ifndef __ASSEMBLER__ /* Power/reset management domain register get/set */ @@ -228,7 +231,6 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) #define OMAP_RSTTIME1_SHIFT 0 #define OMAP_RSTTIME1_MASK (0xff << 0) - /* PRM_RSTCTRL */ /* Named RM_RSTCTRL_WKUP on the 24xx */ /* 2420 calls RST_DPLL3 'RST_DPLL' */ -- cgit v0.10.2 From da0747d4faf55320f0f6cbcd8525e2a8e4619925 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:18:22 -0700 Subject: [ARM] OMAP2 PRCM: clean up CM_IDLEST bits This patch fixes a few OMAP2xxx CM_IDLEST bits that were incorrectly marked as being OMAP2xxx-wide, when they were actually 2420-specific. Also, originally when the PRCM register macros were defined, bit shift macros used a "_SHIFT" suffix, and mask macros used none. This became a source of bugs and confusion, as the mask macros were mistakenly used for shift values. Gradually, the mask macros have been updated, piece by piece, to add a "_MASK" suffix on the end to clarify. This patch applies this change to the CM_IDLEST_* register bits. The patch also adds a few bits that were missing, mostly from the 3430ES1 to ES2 revisions. linux-omap source commits are d18eff5b5fa15e170794397a6a94486d1f774f77, e1f1a5cc24615fb790cc763c96d1c5cfe6296f5b, and part of 9fe6b6cf8d9e0cbb429fd64553a4b3160a9e99e1 Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 1098ecf..297a2fe 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -110,35 +110,56 @@ #define OMAP24XX_EN_DES (1 << 0) /* CM_IDLEST1_CORE specific bits */ -#define OMAP24XX_ST_MAILBOXES (1 << 30) -#define OMAP24XX_ST_WDT4 (1 << 29) -#define OMAP2420_ST_WDT3 (1 << 28) -#define OMAP24XX_ST_MSPRO (1 << 27) -#define OMAP24XX_ST_FAC (1 << 25) -#define OMAP2420_ST_EAC (1 << 24) -#define OMAP24XX_ST_HDQ (1 << 23) -#define OMAP24XX_ST_I2C2 (1 << 20) -#define OMAP24XX_ST_I2C1 (1 << 19) -#define OMAP24XX_ST_MCBSP2 (1 << 16) -#define OMAP24XX_ST_MCBSP1 (1 << 15) -#define OMAP24XX_ST_DSS (1 << 0) +#define OMAP24XX_ST_MAILBOXES_SHIFT 30 +#define OMAP24XX_ST_MAILBOXES_MASK (1 << 30) +#define OMAP24XX_ST_WDT4_SHIFT 29 +#define OMAP24XX_ST_WDT4_MASK (1 << 29) +#define OMAP2420_ST_WDT3_SHIFT 28 +#define OMAP2420_ST_WDT3_MASK (1 << 28) +#define OMAP24XX_ST_MSPRO_SHIFT 27 +#define OMAP24XX_ST_MSPRO_MASK (1 << 27) +#define OMAP24XX_ST_FAC_SHIFT 25 +#define OMAP24XX_ST_FAC_MASK (1 << 25) +#define OMAP2420_ST_EAC_SHIFT 24 +#define OMAP2420_ST_EAC_MASK (1 << 24) +#define OMAP24XX_ST_HDQ_SHIFT 23 +#define OMAP24XX_ST_HDQ_MASK (1 << 23) +#define OMAP2420_ST_I2C2_SHIFT 20 +#define OMAP2420_ST_I2C2_MASK (1 << 20) +#define OMAP2420_ST_I2C1_SHIFT 19 +#define OMAP2420_ST_I2C1_MASK (1 << 19) +#define OMAP24XX_ST_MCBSP2_SHIFT 16 +#define OMAP24XX_ST_MCBSP2_MASK (1 << 16) +#define OMAP24XX_ST_MCBSP1_SHIFT 15 +#define OMAP24XX_ST_MCBSP1_MASK (1 << 15) +#define OMAP24XX_ST_DSS_SHIFT 0 +#define OMAP24XX_ST_DSS_MASK (1 << 0) /* CM_IDLEST2_CORE */ -#define OMAP2430_ST_MCBSP5 (1 << 5) -#define OMAP2430_ST_MCBSP4 (1 << 4) -#define OMAP2430_ST_MCBSP3 (1 << 3) -#define OMAP24XX_ST_SSI (1 << 1) +#define OMAP2430_ST_MCBSP5_SHIFT 5 +#define OMAP2430_ST_MCBSP5_MASK (1 << 5) +#define OMAP2430_ST_MCBSP4_SHIFT 4 +#define OMAP2430_ST_MCBSP4_MASK (1 << 4) +#define OMAP2430_ST_MCBSP3_SHIFT 3 +#define OMAP2430_ST_MCBSP3_MASK (1 << 3) +#define OMAP24XX_ST_SSI_SHIFT 1 +#define OMAP24XX_ST_SSI_MASK (1 << 1) /* CM_IDLEST3_CORE */ /* 2430 only */ -#define OMAP2430_ST_SDRC (1 << 2) +#define OMAP2430_ST_SDRC_MASK (1 << 2) /* CM_IDLEST4_CORE */ -#define OMAP24XX_ST_PKA (1 << 4) -#define OMAP24XX_ST_AES (1 << 3) -#define OMAP24XX_ST_RNG (1 << 2) -#define OMAP24XX_ST_SHA (1 << 1) -#define OMAP24XX_ST_DES (1 << 0) +#define OMAP24XX_ST_PKA_SHIFT 4 +#define OMAP24XX_ST_PKA_MASK (1 << 4) +#define OMAP24XX_ST_AES_SHIFT 3 +#define OMAP24XX_ST_AES_MASK (1 << 3) +#define OMAP24XX_ST_RNG_SHIFT 2 +#define OMAP24XX_ST_RNG_MASK (1 << 2) +#define OMAP24XX_ST_SHA_SHIFT 1 +#define OMAP24XX_ST_SHA_MASK (1 << 1) +#define OMAP24XX_ST_DES_SHIFT 0 +#define OMAP24XX_ST_DES_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ #define OMAP24XX_AUTO_CAM (1 << 31) @@ -275,11 +296,16 @@ #define OMAP24XX_EN_32KSYNC (1 << 1) /* CM_IDLEST_WKUP specific bits */ -#define OMAP2430_ST_ICR (1 << 6) -#define OMAP24XX_ST_OMAPCTRL (1 << 5) -#define OMAP24XX_ST_WDT1 (1 << 4) -#define OMAP24XX_ST_MPU_WDT (1 << 3) -#define OMAP24XX_ST_32KSYNC (1 << 1) +#define OMAP2430_ST_ICR_SHIFT 6 +#define OMAP2430_ST_ICR_MASK (1 << 6) +#define OMAP24XX_ST_OMAPCTRL_SHIFT 5 +#define OMAP24XX_ST_OMAPCTRL_MASK (1 << 5) +#define OMAP24XX_ST_WDT1_SHIFT 4 +#define OMAP24XX_ST_WDT1_MASK (1 << 4) +#define OMAP24XX_ST_MPU_WDT_SHIFT 3 +#define OMAP24XX_ST_MPU_WDT_MASK (1 << 3) +#define OMAP24XX_ST_32KSYNC_SHIFT 1 +#define OMAP24XX_ST_32KSYNC_MASK (1 << 1) /* CM_AUTOIDLE_WKUP */ #define OMAP24XX_AUTO_OMAPCTRL (1 << 5) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 844356c..6f3f5a3 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -183,29 +183,52 @@ #define OMAP3430ES2_EN_CPEFUSE_MASK (1 << 0) /* CM_IDLEST1_CORE specific bits */ -#define OMAP3430_ST_ICR (1 << 29) -#define OMAP3430_ST_AES2 (1 << 28) -#define OMAP3430_ST_SHA12 (1 << 27) -#define OMAP3430_ST_DES2 (1 << 26) -#define OMAP3430_ST_MSPRO (1 << 23) -#define OMAP3430_ST_HDQ (1 << 22) -#define OMAP3430ES1_ST_FAC (1 << 8) -#define OMAP3430ES1_ST_MAILBOXES (1 << 7) -#define OMAP3430_ST_OMAPCTRL (1 << 6) -#define OMAP3430_ST_SDMA (1 << 2) -#define OMAP3430_ST_SDRC (1 << 1) -#define OMAP3430_ST_SSI (1 << 0) +#define OMAP3430ES2_ST_MMC3_SHIFT 30 +#define OMAP3430ES2_ST_MMC3_MASK (1 << 30) +#define OMAP3430_ST_ICR_SHIFT 29 +#define OMAP3430_ST_ICR_MASK (1 << 29) +#define OMAP3430_ST_AES2_SHIFT 28 +#define OMAP3430_ST_AES2_MASK (1 << 28) +#define OMAP3430_ST_SHA12_SHIFT 27 +#define OMAP3430_ST_SHA12_MASK (1 << 27) +#define OMAP3430_ST_DES2_SHIFT 26 +#define OMAP3430_ST_DES2_MASK (1 << 26) +#define OMAP3430_ST_MSPRO_SHIFT 23 +#define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define OMAP3430_ST_HDQ_SHIFT 22 +#define OMAP3430_ST_HDQ_MASK (1 << 22) +#define OMAP3430ES1_ST_FAC_SHIFT 8 +#define OMAP3430ES1_ST_FAC_MASK (1 << 8) +#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8 +#define OMAP3430ES2_ST_SSI_IDLE_MASK (1 << 8) +#define OMAP3430_ST_MAILBOXES_SHIFT 7 +#define OMAP3430_ST_MAILBOXES_MASK (1 << 7) +#define OMAP3430_ST_OMAPCTRL_SHIFT 6 +#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6) +#define OMAP3430_ST_SDMA_SHIFT 2 +#define OMAP3430_ST_SDMA_MASK (1 << 2) +#define OMAP3430_ST_SDRC_SHIFT 1 +#define OMAP3430_ST_SDRC_MASK (1 << 1) +#define OMAP3430_ST_SSI_STDBY_SHIFT 0 +#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0) /* CM_IDLEST2_CORE */ -#define OMAP3430_ST_PKA (1 << 4) -#define OMAP3430_ST_AES1 (1 << 3) -#define OMAP3430_ST_RNG (1 << 2) -#define OMAP3430_ST_SHA11 (1 << 1) -#define OMAP3430_ST_DES1 (1 << 0) +#define OMAP3430_ST_PKA_SHIFT 4 +#define OMAP3430_ST_PKA_MASK (1 << 4) +#define OMAP3430_ST_AES1_SHIFT 3 +#define OMAP3430_ST_AES1_MASK (1 << 3) +#define OMAP3430_ST_RNG_SHIFT 2 +#define OMAP3430_ST_RNG_MASK (1 << 2) +#define OMAP3430_ST_SHA11_SHIFT 1 +#define OMAP3430_ST_SHA11_MASK (1 << 1) +#define OMAP3430_ST_DES1_SHIFT 0 +#define OMAP3430_ST_DES1_MASK (1 << 0) /* CM_IDLEST3_CORE */ #define OMAP3430ES2_ST_USBTLL_SHIFT 2 #define OMAP3430ES2_ST_USBTLL_MASK (1 << 2) +#define OMAP3430ES2_ST_CPEFUSE_SHIFT 0 +#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ #define OMAP3430ES2_AUTO_MMC3 (1 << 30) @@ -360,6 +383,7 @@ /* CM_FCLKEN_WKUP specific bits */ #define OMAP3430ES2_EN_USIMOCP_SHIFT 9 +#define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9) /* CM_ICLKEN_WKUP specific bits */ #define OMAP3430_EN_WDT1 (1 << 4) @@ -368,11 +392,18 @@ #define OMAP3430_EN_32KSYNC_SHIFT 2 /* CM_IDLEST_WKUP specific bits */ -#define OMAP3430_ST_WDT2 (1 << 5) -#define OMAP3430_ST_WDT1 (1 << 4) -#define OMAP3430_ST_32KSYNC (1 << 2) +#define OMAP3430ES2_ST_USIMOCP_SHIFT 9 +#define OMAP3430ES2_ST_USIMOCP_MASK (1 << 9) +#define OMAP3430_ST_WDT2_SHIFT 5 +#define OMAP3430_ST_WDT2_MASK (1 << 5) +#define OMAP3430_ST_WDT1_SHIFT 4 +#define OMAP3430_ST_WDT1_MASK (1 << 4) +#define OMAP3430_ST_32KSYNC_SHIFT 2 +#define OMAP3430_ST_32KSYNC_MASK (1 << 2) /* CM_AUTOIDLE_WKUP */ +#define OMAP3430ES2_AUTO_USIMOCP (1 << 9) +#define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9 #define OMAP3430_AUTO_WDT2 (1 << 5) #define OMAP3430_AUTO_WDT2_SHIFT 5 #define OMAP3430_AUTO_WDT1 (1 << 4) @@ -437,6 +468,8 @@ #define OMAP3430_ST_CORE_CLK_MASK (1 << 0) /* CM_IDLEST2_CKGEN */ +#define OMAP3430ES2_ST_USIM_CLK_SHIFT 2 +#define OMAP3430ES2_ST_USIM_CLK_MASK (1 << 2) #define OMAP3430ES2_ST_120M_CLK_SHIFT 1 #define OMAP3430ES2_ST_120M_CLK_MASK (1 << 1) #define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT 0 @@ -508,7 +541,12 @@ #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0 /* CM_IDLEST_DSS */ -#define OMAP3430_ST_DSS (1 << 0) +#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1 +#define OMAP3430ES2_ST_DSS_IDLE_MASK (1 << 1) +#define OMAP3430ES2_ST_DSS_STDBY_SHIFT 0 +#define OMAP3430ES2_ST_DSS_STDBY_MASK (1 << 0) +#define OMAP3430ES1_ST_DSS_SHIFT 0 +#define OMAP3430ES1_ST_DSS_MASK (1 << 0) /* CM_AUTOIDLE_DSS */ #define OMAP3430_AUTO_DSS (1 << 0) @@ -562,10 +600,14 @@ /* CM_ICLKEN_PER specific bits */ /* CM_IDLEST_PER */ -#define OMAP3430_ST_WDT3 (1 << 12) -#define OMAP3430_ST_MCBSP4 (1 << 2) -#define OMAP3430_ST_MCBSP3 (1 << 1) -#define OMAP3430_ST_MCBSP2 (1 << 0) +#define OMAP3430_ST_WDT3_SHIFT 12 +#define OMAP3430_ST_WDT3_MASK (1 << 12) +#define OMAP3430_ST_MCBSP4_SHIFT 2 +#define OMAP3430_ST_MCBSP4_MASK (1 << 2) +#define OMAP3430_ST_MCBSP3_SHIFT 1 +#define OMAP3430_ST_MCBSP3_MASK (1 << 1) +#define OMAP3430_ST_MCBSP2_SHIFT 0 +#define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ #define OMAP3430_AUTO_GPIO6 (1 << 17) @@ -693,6 +735,10 @@ #define OMAP3430ES2_EN_USBHOST_MASK (1 << 0) /* CM_IDLEST_USBHOST */ +#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT 1 +#define OMAP3430ES2_ST_USBHOST_IDLE_MASK (1 << 1) +#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT 0 +#define OMAP3430ES2_ST_USBHOST_STDBY_MASK (1 << 0) /* CM_AUTOIDLE_USBHOST */ #define OMAP3430ES2_AUTO_USBHOST_SHIFT 0 diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 4a32822..812d50e 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -113,33 +113,58 @@ #define OMAP2430_EN_USBHS (1 << 6) /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */ -#define OMAP2420_ST_MMC (1 << 26) -#define OMAP24XX_ST_UART2 (1 << 22) -#define OMAP24XX_ST_UART1 (1 << 21) -#define OMAP24XX_ST_MCSPI2 (1 << 18) -#define OMAP24XX_ST_MCSPI1 (1 << 17) -#define OMAP24XX_ST_GPT12 (1 << 14) -#define OMAP24XX_ST_GPT11 (1 << 13) -#define OMAP24XX_ST_GPT10 (1 << 12) -#define OMAP24XX_ST_GPT9 (1 << 11) -#define OMAP24XX_ST_GPT8 (1 << 10) -#define OMAP24XX_ST_GPT7 (1 << 9) -#define OMAP24XX_ST_GPT6 (1 << 8) -#define OMAP24XX_ST_GPT5 (1 << 7) -#define OMAP24XX_ST_GPT4 (1 << 6) -#define OMAP24XX_ST_GPT3 (1 << 5) -#define OMAP24XX_ST_GPT2 (1 << 4) -#define OMAP2420_ST_VLYNQ (1 << 3) +#define OMAP2420_ST_MMC_SHIFT 26 +#define OMAP2420_ST_MMC_MASK (1 << 26) +#define OMAP24XX_ST_UART2_SHIFT 22 +#define OMAP24XX_ST_UART2_MASK (1 << 22) +#define OMAP24XX_ST_UART1_SHIFT 21 +#define OMAP24XX_ST_UART1_MASK (1 << 21) +#define OMAP24XX_ST_MCSPI2_SHIFT 18 +#define OMAP24XX_ST_MCSPI2_MASK (1 << 18) +#define OMAP24XX_ST_MCSPI1_SHIFT 17 +#define OMAP24XX_ST_MCSPI1_MASK (1 << 17) +#define OMAP24XX_ST_GPT12_SHIFT 14 +#define OMAP24XX_ST_GPT12_MASK (1 << 14) +#define OMAP24XX_ST_GPT11_SHIFT 13 +#define OMAP24XX_ST_GPT11_MASK (1 << 13) +#define OMAP24XX_ST_GPT10_SHIFT 12 +#define OMAP24XX_ST_GPT10_MASK (1 << 12) +#define OMAP24XX_ST_GPT9_SHIFT 11 +#define OMAP24XX_ST_GPT9_MASK (1 << 11) +#define OMAP24XX_ST_GPT8_SHIFT 10 +#define OMAP24XX_ST_GPT8_MASK (1 << 10) +#define OMAP24XX_ST_GPT7_SHIFT 9 +#define OMAP24XX_ST_GPT7_MASK (1 << 9) +#define OMAP24XX_ST_GPT6_SHIFT 8 +#define OMAP24XX_ST_GPT6_MASK (1 << 8) +#define OMAP24XX_ST_GPT5_SHIFT 7 +#define OMAP24XX_ST_GPT5_MASK (1 << 7) +#define OMAP24XX_ST_GPT4_SHIFT 6 +#define OMAP24XX_ST_GPT4_MASK (1 << 6) +#define OMAP24XX_ST_GPT3_SHIFT 5 +#define OMAP24XX_ST_GPT3_MASK (1 << 5) +#define OMAP24XX_ST_GPT2_SHIFT 4 +#define OMAP24XX_ST_GPT2_MASK (1 << 4) +#define OMAP2420_ST_VLYNQ_SHIFT 3 +#define OMAP2420_ST_VLYNQ_MASK (1 << 3) /* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */ -#define OMAP2430_ST_MDM_INTC (1 << 11) -#define OMAP2430_ST_GPIO5 (1 << 10) -#define OMAP2430_ST_MCSPI3 (1 << 9) -#define OMAP2430_ST_MMCHS2 (1 << 8) -#define OMAP2430_ST_MMCHS1 (1 << 7) -#define OMAP2430_ST_USBHS (1 << 6) -#define OMAP24XX_ST_UART3 (1 << 2) -#define OMAP24XX_ST_USB (1 << 0) +#define OMAP2430_ST_MDM_INTC_SHIFT 11 +#define OMAP2430_ST_MDM_INTC_MASK (1 << 11) +#define OMAP2430_ST_GPIO5_SHIFT 10 +#define OMAP2430_ST_GPIO5_MASK (1 << 10) +#define OMAP2430_ST_MCSPI3_SHIFT 9 +#define OMAP2430_ST_MCSPI3_MASK (1 << 9) +#define OMAP2430_ST_MMCHS2_SHIFT 8 +#define OMAP2430_ST_MMCHS2_MASK (1 << 8) +#define OMAP2430_ST_MMCHS1_SHIFT 7 +#define OMAP2430_ST_MMCHS1_MASK (1 << 7) +#define OMAP2430_ST_USBHS_SHIFT 6 +#define OMAP2430_ST_USBHS_MASK (1 << 6) +#define OMAP24XX_ST_UART3_SHIFT 2 +#define OMAP24XX_ST_UART3_MASK (1 << 2) +#define OMAP24XX_ST_USB_SHIFT 0 +#define OMAP24XX_ST_USB_MASK (1 << 0) /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP24XX_EN_GPIOS_SHIFT 2 @@ -148,11 +173,13 @@ #define OMAP24XX_EN_GPT1 (1 << 0) /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ -#define OMAP24XX_ST_GPIOS (1 << 2) -#define OMAP24XX_ST_GPT1 (1 << 0) +#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) +#define OMAP24XX_ST_GPIOS_MASK 2 +#define OMAP24XX_ST_GPT1_SHIFT (1 << 0) +#define OMAP24XX_ST_GPT1_MASK 0 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ -#define OMAP2430_ST_MDM (1 << 0) +#define OMAP2430_ST_MDM_SHIFT (1 << 0) /* 3430 register bits shared between CM & PRM registers */ @@ -205,24 +232,46 @@ #define OMAP3430_EN_HSOTGUSB_SHIFT 4 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ -#define OMAP3430_ST_MMC2 (1 << 25) -#define OMAP3430_ST_MMC1 (1 << 24) -#define OMAP3430_ST_MCSPI4 (1 << 21) -#define OMAP3430_ST_MCSPI3 (1 << 20) -#define OMAP3430_ST_MCSPI2 (1 << 19) -#define OMAP3430_ST_MCSPI1 (1 << 18) -#define OMAP3430_ST_I2C3 (1 << 17) -#define OMAP3430_ST_I2C2 (1 << 16) -#define OMAP3430_ST_I2C1 (1 << 15) -#define OMAP3430_ST_UART2 (1 << 14) -#define OMAP3430_ST_UART1 (1 << 13) -#define OMAP3430_ST_GPT11 (1 << 12) -#define OMAP3430_ST_GPT10 (1 << 11) -#define OMAP3430_ST_MCBSP5 (1 << 10) -#define OMAP3430_ST_MCBSP1 (1 << 9) -#define OMAP3430_ST_FSHOSTUSB (1 << 5) -#define OMAP3430_ST_HSOTGUSB (1 << 4) -#define OMAP3430_ST_D2D (1 << 3) +#define OMAP3430_ST_MMC2_SHIFT 25 +#define OMAP3430_ST_MMC2_MASK (1 << 25) +#define OMAP3430_ST_MMC1_SHIFT 24 +#define OMAP3430_ST_MMC1_MASK (1 << 24) +#define OMAP3430_ST_MCSPI4_SHIFT 21 +#define OMAP3430_ST_MCSPI4_MASK (1 << 21) +#define OMAP3430_ST_MCSPI3_SHIFT 20 +#define OMAP3430_ST_MCSPI3_MASK (1 << 20) +#define OMAP3430_ST_MCSPI2_SHIFT 19 +#define OMAP3430_ST_MCSPI2_MASK (1 << 19) +#define OMAP3430_ST_MCSPI1_SHIFT 18 +#define OMAP3430_ST_MCSPI1_MASK (1 << 18) +#define OMAP3430_ST_I2C3_SHIFT 17 +#define OMAP3430_ST_I2C3_MASK (1 << 17) +#define OMAP3430_ST_I2C2_SHIFT 16 +#define OMAP3430_ST_I2C2_MASK (1 << 16) +#define OMAP3430_ST_I2C1_SHIFT 15 +#define OMAP3430_ST_I2C1_MASK (1 << 15) +#define OMAP3430_ST_UART2_SHIFT 14 +#define OMAP3430_ST_UART2_MASK (1 << 14) +#define OMAP3430_ST_UART1_SHIFT 13 +#define OMAP3430_ST_UART1_MASK (1 << 13) +#define OMAP3430_ST_GPT11_SHIFT 12 +#define OMAP3430_ST_GPT11_MASK (1 << 12) +#define OMAP3430_ST_GPT10_SHIFT 11 +#define OMAP3430_ST_GPT10_MASK (1 << 11) +#define OMAP3430_ST_MCBSP5_SHIFT 10 +#define OMAP3430_ST_MCBSP5_MASK (1 << 10) +#define OMAP3430_ST_MCBSP1_SHIFT 9 +#define OMAP3430_ST_MCBSP1_MASK (1 << 9) +#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT 5 +#define OMAP3430ES1_ST_FSHOSTUSB_MASK (1 << 5) +#define OMAP3430ES1_ST_HSOTGUSB_SHIFT 4 +#define OMAP3430ES1_ST_HSOTGUSB_MASK (1 << 4) +#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5 +#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK (1 << 5) +#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT 4 +#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK (1 << 4) +#define OMAP3430_ST_D2D_SHIFT 3 +#define OMAP3430_ST_D2D_MASK (1 << 3) /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) @@ -241,11 +290,16 @@ #define OMAP3430_EN_GPT12_SHIFT 1 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */ -#define OMAP3430_ST_SR2 (1 << 7) -#define OMAP3430_ST_SR1 (1 << 6) -#define OMAP3430_ST_GPIO1 (1 << 3) -#define OMAP3430_ST_GPT12 (1 << 1) -#define OMAP3430_ST_GPT1 (1 << 0) +#define OMAP3430_ST_SR2_SHIFT 7 +#define OMAP3430_ST_SR2_MASK (1 << 7) +#define OMAP3430_ST_SR1_SHIFT 6 +#define OMAP3430_ST_SR1_MASK (1 << 6) +#define OMAP3430_ST_GPIO1_SHIFT 3 +#define OMAP3430_ST_GPIO1_MASK (1 << 3) +#define OMAP3430_ST_GPT12_SHIFT 1 +#define OMAP3430_ST_GPT12_MASK (1 << 1) +#define OMAP3430_ST_GPT1_SHIFT 0 +#define OMAP3430_ST_GPT1_MASK (1 << 0) /* * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM, @@ -296,20 +350,34 @@ #define OMAP3430_EN_MCBSP2_SHIFT 0 /* CM_IDLEST_PER, PM_WKST_PER shared bits */ -#define OMAP3430_ST_GPIO6 (1 << 17) -#define OMAP3430_ST_GPIO5 (1 << 16) -#define OMAP3430_ST_GPIO4 (1 << 15) -#define OMAP3430_ST_GPIO3 (1 << 14) -#define OMAP3430_ST_GPIO2 (1 << 13) -#define OMAP3430_ST_UART3 (1 << 11) -#define OMAP3430_ST_GPT9 (1 << 10) -#define OMAP3430_ST_GPT8 (1 << 9) -#define OMAP3430_ST_GPT7 (1 << 8) -#define OMAP3430_ST_GPT6 (1 << 7) -#define OMAP3430_ST_GPT5 (1 << 6) -#define OMAP3430_ST_GPT4 (1 << 5) -#define OMAP3430_ST_GPT3 (1 << 4) -#define OMAP3430_ST_GPT2 (1 << 3) +#define OMAP3430_ST_GPIO6_SHIFT 17 +#define OMAP3430_ST_GPIO6_MASK (1 << 17) +#define OMAP3430_ST_GPIO5_SHIFT 16 +#define OMAP3430_ST_GPIO5_MASK (1 << 16) +#define OMAP3430_ST_GPIO4_SHIFT 15 +#define OMAP3430_ST_GPIO4_MASK (1 << 15) +#define OMAP3430_ST_GPIO3_SHIFT 14 +#define OMAP3430_ST_GPIO3_MASK (1 << 14) +#define OMAP3430_ST_GPIO2_SHIFT 13 +#define OMAP3430_ST_GPIO2_MASK (1 << 13) +#define OMAP3430_ST_UART3_SHIFT 11 +#define OMAP3430_ST_UART3_MASK (1 << 11) +#define OMAP3430_ST_GPT9_SHIFT 10 +#define OMAP3430_ST_GPT9_MASK (1 << 10) +#define OMAP3430_ST_GPT8_SHIFT 9 +#define OMAP3430_ST_GPT8_MASK (1 << 9) +#define OMAP3430_ST_GPT7_SHIFT 8 +#define OMAP3430_ST_GPT7_MASK (1 << 8) +#define OMAP3430_ST_GPT6_SHIFT 7 +#define OMAP3430_ST_GPT6_MASK (1 << 7) +#define OMAP3430_ST_GPT5_SHIFT 6 +#define OMAP3430_ST_GPT5_MASK (1 << 6) +#define OMAP3430_ST_GPT4_SHIFT 5 +#define OMAP3430_ST_GPT4_MASK (1 << 5) +#define OMAP3430_ST_GPT3_SHIFT 4 +#define OMAP3430_ST_GPT3_MASK (1 << 4) +#define OMAP3430_ST_GPT2_SHIFT 3 +#define OMAP3430_ST_GPT2_MASK (1 << 3) /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ #define OMAP3430_EN_CORE_SHIFT 0 -- cgit v0.10.2 From fed415e48f07799b278cd4353385fee1464d4aca Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 28 Jan 2009 12:18:48 -0700 Subject: [ARM] omap: Fix omap1 clock issues This fixes booting, and is a step toward fixing things properly: - Make enable_reg u32 instead of u16 [rmk: virtual addresses are void __iomem *, not u32] - Get rid of VIRTUAL_IO_ADDRESS for clocks - Use __raw_read/write instead of omap_read/write for clock registers This patch adds a bunch of compile warnings until omap1 clock also uses offsets. linux-omap source commit is 9d1dff8638c9e96a401e1885f9948662e9ff9636. Signed-off-by: Tony Lindgren Signed-off-by: Paul Walmsley Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 7c45543..1e477af 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -163,7 +163,7 @@ static void omap1_watchdog_recalc(struct clk * clk) static void omap1_uart_recalc(struct clk * clk) { - unsigned int val = omap_readl(clk->enable_reg); + unsigned int val = __raw_readl(clk->enable_reg); if (val & clk->enable_bit) clk->rate = 48000000; else @@ -517,14 +517,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) { unsigned int val; - val = omap_readl(clk->enable_reg); + val = __raw_readl(clk->enable_reg); if (rate == 12000000) val &= ~(1 << clk->enable_bit); else if (rate == 48000000) val |= (1 << clk->enable_bit); else return -EINVAL; - omap_writel(val, clk->enable_reg); + __raw_writel(val, clk->enable_reg); clk->rate = rate; return 0; @@ -543,8 +543,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) else ratio_bits = (dsor - 2) << 2; - ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; - omap_writew(ratio_bits, clk->enable_reg); + ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; + __raw_writew(ratio_bits, clk->enable_reg); return 0; } @@ -583,8 +583,8 @@ static void omap1_init_ext_clk(struct clk * clk) __u16 ratio_bits; /* Determine current rate and ensure clock is based on 96MHz APLL */ - ratio_bits = omap_readw(clk->enable_reg) & ~1; - omap_writew(ratio_bits, clk->enable_reg); + ratio_bits = __raw_readw(clk->enable_reg) & ~1; + __raw_writew(ratio_bits, clk->enable_reg); ratio_bits = (ratio_bits & 0xfc) >> 2; if (ratio_bits > 6) @@ -646,25 +646,13 @@ static int omap1_clk_enable_generic(struct clk *clk) } if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); } return 0; @@ -679,25 +667,13 @@ static void omap1_clk_disable_generic(struct clk *clk) return; if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); } } @@ -745,17 +721,10 @@ static void __init omap1_clk_disable_unused(struct clk *clk) } /* Is the clock already disabled? */ - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(clk->enable_reg); - else - regval32 = omap_readl(clk->enable_reg); - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(clk->enable_reg); - else - regval32 = omap_readw(clk->enable_reg); - } + if (clk->flags & ENABLE_REG_32BIT) + regval32 = __raw_readl(clk->enable_reg); + else + regval32 = __raw_readw(clk->enable_reg); if ((regval32 & (1 << clk->enable_bit)) == 0) return; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index ed343af..1b4dd05 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -165,7 +165,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | RATE_PROPAGATES, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, }, @@ -177,7 +177,7 @@ static struct clk sossi_ck = { .ops = &clkops_generic, .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_1, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), .enable_bit = 16, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, @@ -200,7 +200,7 @@ static struct arm_idlect1_clk armper_ck = { .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -214,7 +214,7 @@ static struct clk arm_gpio_ck = { .name = "arm_gpio_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_GPIOCK, .recalc = &followparent_recalc, }; @@ -225,7 +225,7 @@ static struct arm_idlect1_clk armxor_ck = { .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, }, @@ -238,7 +238,7 @@ static struct arm_idlect1_clk armtim_ck = { .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, }, @@ -251,7 +251,7 @@ static struct arm_idlect1_clk armwdt_ck = { .ops = &clkops_generic, .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_WDTCK, .recalc = &omap1_watchdog_recalc, }, @@ -274,7 +274,7 @@ static struct clk dsp_ck = { .name = "dsp_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .enable_reg = (void __iomem *)ARM_CKCTL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -296,7 +296,6 @@ static struct clk dspper_ck = { .name = "dspper_ck", .ops = &clkops_dspck, .parent = &ck_dpll1, - .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -309,7 +308,6 @@ static struct clk dspxor_ck = { .name = "dspxor_ck", .ops = &clkops_dspck, .parent = &ck_ref, - .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, @@ -319,7 +317,6 @@ static struct clk dsptim_ck = { .name = "dsptim_ck", .ops = &clkops_dspck, .parent = &ck_ref, - .flags = VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, @@ -364,7 +361,7 @@ static struct clk l3_ocpi_ck = { .name = "l3_ocpi_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_OCPI_CK, .recalc = &followparent_recalc, }; @@ -373,7 +370,7 @@ static struct clk tc1_ck = { .name = "tc1_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC1_CK, .recalc = &followparent_recalc, }; @@ -382,7 +379,7 @@ static struct clk tc2_ck = { .name = "tc2_ck", .ops = &clkops_generic, .parent = &tc_ck.clk, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC2_CK, .recalc = &followparent_recalc, }; @@ -408,7 +405,7 @@ static struct arm_idlect1_clk api_ck = { .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_APICK, .recalc = &followparent_recalc, }, @@ -421,7 +418,7 @@ static struct arm_idlect1_clk lb_ck = { .ops = &clkops_generic, .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LBCK, .recalc = &followparent_recalc, }, @@ -446,7 +443,7 @@ static struct clk lcd_ck_16xx = { .name = "lcd_ck", .ops = &clkops_generic, .parent = &ck_dpll1, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -460,7 +457,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .ops = &clkops_generic, .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -477,7 +474,7 @@ static struct clk uart1_1510 = { .parent = &armper_ck.clk, .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, @@ -492,7 +489,7 @@ static struct uart_clk uart1_16xx = { .rate = 48000000, .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 29, }, .sysc_addr = 0xfffb0054, @@ -505,7 +502,7 @@ static struct clk uart2_ck = { .parent = &armper_ck.clk, .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, @@ -518,7 +515,7 @@ static struct clk uart3_1510 = { .parent = &armper_ck.clk, .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, @@ -533,7 +530,7 @@ static struct uart_clk uart3_16xx = { .rate = 48000000, .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 31, }, .sysc_addr = 0xfffb9854, @@ -545,7 +542,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ /* Direct from ULPD, no parent */ .rate = 6000000, .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), .enable_bit = USB_MCLK_EN_BIT, }; @@ -555,7 +552,7 @@ static struct clk usb_hhc_ck1510 = { /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = USB_HOST_HHC_UHOST_EN, }; @@ -566,7 +563,7 @@ static struct clk usb_hhc_ck16xx = { .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ .enable_bit = 8 /* UHOST_EN */, }; @@ -576,7 +573,7 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .flags = RATE_FIXED, - .enable_reg = (void __iomem *)SOFT_REQ_REG, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 4, }; @@ -586,15 +583,15 @@ static struct clk mclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .flags = RATE_FIXED, - .enable_reg = (void __iomem *)SOFT_REQ_REG, - .enable_bit = 6, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, }; static struct clk mclk_16xx = { .name = "mclk", .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), .enable_bit = COM_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, @@ -613,7 +610,7 @@ static struct clk bclk_16xx = { .name = "bclk", .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), .enable_bit = SWD_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, @@ -627,7 +624,7 @@ static struct clk mmc1_ck = { .parent = &armper_ck.clk, .rate = 48000000, .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 23, }; @@ -639,7 +636,7 @@ static struct clk mmc2_ck = { .parent = &armper_ck.clk, .rate = 48000000, .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 20, }; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index cd69111..8705902 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -134,7 +134,6 @@ extern const struct clkops clkops_null; #define RATE_PROPAGATES (1 << 2) /* Program children too */ /* bits 3-4 are free */ #define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ -#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ #define CLOCK_IDLE_CONTROL (1 << 7) #define CLOCK_NO_IDLE_PARENT (1 << 8) #define DELAYED_APP (1 << 9) /* Delay application of clock */ -- cgit v0.10.2 From f8de9b2c45c4506702da4bd3a5bc7630754077f9 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:31 -0700 Subject: [ARM] OMAP2 SDRC: move mach-omap2/memory.h into mach/sdrc.h Move the contents of the arch/arm/mach-omap2/memory.h file to the existing mach/sdrc.h file, and remove memory.h. Modify files which include memory.h to include asm/arch/sdrc.h instead. linux-omap source commit is e7ae2d89921372fc4b9712a32cc401d645597807. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5d7d4c5..18fddb6 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -29,7 +29,7 @@ #include #include -#include "memory.h" +#include #include "sdrc.h" #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index b990266..83911ad 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -33,7 +33,7 @@ #include #include -#include "memory.h" +#include #include "clock.h" #include "prm.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 3d756ba..52385b1 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -32,7 +32,7 @@ #include #include -#include "memory.h" +#include #include "clock.h" #include "prm.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5ea64f9..2b5f28a 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,8 +27,8 @@ #include #include #include - -#include "memory.h" +#include +#include #include "clock.h" diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 882c702..93cb257 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -29,9 +29,16 @@ #include "prm.h" -#include "memory.h" +#include #include "sdrc.h" +/* Memory timing, DLL mode flags */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + + void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h deleted file mode 100644 index bb3db80..0000000 --- a/arch/arm/mach-omap2/memory.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/memory.h - * - * Interface for memory timing related functions for OMAP24XX - * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff - * - * Copyright (C) 2005 Nokia Corporation - * Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H -#define ARCH_ARM_MACH_OMAP2_MEMORY_H - -/* Memory timings */ -#define M_DDR 1 -#define M_LOCK_CTRL (1 << 2) -#define M_UNLOCK 0 -#define M_LOCK 1 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); -extern u32 omap2_memory_get_slow_dll_ctrl(void); -extern u32 omap2_memory_get_fast_dll_ctrl(void); -extern u32 omap2_memory_get_type(void); -u32 omap2_dll_force_needed(void); -u32 omap2_reprogram_sdrc(u32 level, u32 force); -void __init omap2_init_memory(void); -void __init gpmc_init(void); - -#endif diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 45b6784..921b165 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -103,6 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern void gpmc_init(void); +extern void __init gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index a98c6c3..c905b52 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -74,4 +74,25 @@ #define SMS_SYSCONFIG 0x010 /* REVISIT: fill in other SMS registers here */ +#ifndef __ASSEMBLER__ + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); +extern u32 omap2_memory_get_slow_dll_ctrl(void); +extern u32 omap2_memory_get_fast_dll_ctrl(void); +extern u32 omap2_memory_get_type(void); +u32 omap2_dll_force_needed(void); +u32 omap2_reprogram_sdrc(u32 level, u32 force); +void __init omap2_init_memory(void); + +#endif + + #endif -- cgit v0.10.2 From 96609ef4009515f0667a52b7776c21418df19bd8 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:34 -0700 Subject: [ARM] OMAP2 SDRC: rename memory.c to sdrc2xxx.c Rename arch/arm/mach-omap2/memory.c to arch/arm/mach-omap2/sdrc2xxx.c, since it contains exclusively SDRAM-related functions. Most of the functions are also OMAP2xxx-specific - those which are common will be separated out in a following patch. linux-omap source commit is fe212f797e2efef9dc88bcb5db7cf9db3f9f562e. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bbd12bc..bb47d43 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \ +obj-y := irq.o id.o io.o sdrc2xxx.o control.o prcm.o clock.o mux.o \ devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ clockdomain.o diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c deleted file mode 100644 index 93cb257..0000000 --- a/arch/arm/mach-omap2/memory.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/memory.c - * - * Memory timing related functions for OMAP24XX - * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff - * - * Copyright (C) 2005 Nokia Corporation - * Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "prm.h" - -#include -#include "sdrc.h" - -/* Memory timing, DLL mode flags */ -#define M_DDR 1 -#define M_LOCK_CTRL (1 << 2) -#define M_UNLOCK 0 -#define M_LOCK 1 - - -void __iomem *omap2_sdrc_base; -void __iomem *omap2_sms_base; - -static struct memory_timings mem_timings; -static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; - -u32 omap2_memory_get_slow_dll_ctrl(void) -{ - return mem_timings.slow_dll_ctrl; -} - -u32 omap2_memory_get_fast_dll_ctrl(void) -{ - return mem_timings.fast_dll_ctrl; -} - -u32 omap2_memory_get_type(void) -{ - return mem_timings.m_type; -} - -/* - * Check the DLL lock state, and return tue if running in unlock mode. - * This is needed to compensate for the shifted DLL value in unlock mode. - */ -u32 omap2_dll_force_needed(void) -{ - /* dlla and dllb are a set */ - u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL); - - if ((dll_state & (1 << 2)) == (1 << 2)) - return 1; - else - return 0; -} - -/* - * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC. - * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or - * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2) - */ -u32 omap2_reprogram_sdrc(u32 level, u32 force) -{ - u32 dll_ctrl, m_type; - u32 prev = curr_perf_level; - unsigned long flags; - - if ((curr_perf_level == level) && !force) - return prev; - - if (level == CORE_CLK_SRC_DPLL) { - dll_ctrl = omap2_memory_get_slow_dll_ctrl(); - } else if (level == CORE_CLK_SRC_DPLL_X2) { - dll_ctrl = omap2_memory_get_fast_dll_ctrl(); - } else { - return prev; - } - - m_type = omap2_memory_get_type(); - - local_irq_save(flags); - __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); - omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); - curr_perf_level = level; - local_irq_restore(flags); - - return prev; -} - -#if !defined(CONFIG_ARCH_OMAP2) -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ -} -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type) -{ -} -#endif - -void omap2_init_memory_params(u32 force_lock_to_unlock_mode) -{ - unsigned long dll_cnt; - u32 fast_dll = 0; - - mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ - - /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. - * In the case of 2422, its ok to use CS1 instead of CS0. - */ - if (cpu_is_omap2422()) - mem_timings.base_cs = 1; - else - mem_timings.base_cs = 0; - - if (mem_timings.m_type != M_DDR) - return; - - /* With DDR we need to determine the low frequency DLL value */ - if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) - mem_timings.dll_mode = M_UNLOCK; - else - mem_timings.dll_mode = M_LOCK; - - if (mem_timings.base_cs == 0) { - fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL); - dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00; - } else { - fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL); - dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00; - } - if (force_lock_to_unlock_mode) { - fast_dll &= ~0xff00; - fast_dll |= dll_cnt; /* Current lock mode */ - } - /* set fast timings with DLL filter disabled */ - mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8)); - - /* No disruptions, DDR will be offline & C-ABI not followed */ - omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, - mem_timings.fast_dll_ctrl, - mem_timings.base_cs, - force_lock_to_unlock_mode); - mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ - - /* Turn status into unlock ctrl */ - mem_timings.slow_dll_ctrl |= - ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - - /* 90 degree phase for anything below 133Mhz + disable DLL filter */ - mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); -} - -void __init omap2_set_globals_memory(struct omap_globals *omap2_globals) -{ - omap2_sdrc_base = omap2_globals->sdrc; - omap2_sms_base = omap2_globals->sms; -} - -/* turn on smart idle modes for SDRAM scheduler and controller */ -void __init omap2_init_memory(void) -{ - u32 l; - - if (!cpu_is_omap2420()) - return; - - l = sms_read_reg(SMS_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sms_write_reg(l, SMS_SYSCONFIG); - - l = sdrc_read_reg(SDRC_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sdrc_write_reg(l, SDRC_SYSCONFIG); -} diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c new file mode 100644 index 0000000..3e38aa4 --- /dev/null +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -0,0 +1,198 @@ +/* + * linux/arch/arm/mach-omap2/sdrc2xxx.c + * + * SDRAM timing related functions for OMAP2xxx + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff + * + * Copyright (C) 2005 Nokia Corporation + * Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "prm.h" + +#include +#include "sdrc.h" + +/* Memory timing, DLL mode flags */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + + +void __iomem *omap2_sdrc_base; +void __iomem *omap2_sms_base; + +static struct memory_timings mem_timings; +static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; + +u32 omap2_memory_get_slow_dll_ctrl(void) +{ + return mem_timings.slow_dll_ctrl; +} + +u32 omap2_memory_get_fast_dll_ctrl(void) +{ + return mem_timings.fast_dll_ctrl; +} + +u32 omap2_memory_get_type(void) +{ + return mem_timings.m_type; +} + +/* + * Check the DLL lock state, and return tue if running in unlock mode. + * This is needed to compensate for the shifted DLL value in unlock mode. + */ +u32 omap2_dll_force_needed(void) +{ + /* dlla and dllb are a set */ + u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL); + + if ((dll_state & (1 << 2)) == (1 << 2)) + return 1; + else + return 0; +} + +/* + * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC. + * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or + * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2) + */ +u32 omap2_reprogram_sdrc(u32 level, u32 force) +{ + u32 dll_ctrl, m_type; + u32 prev = curr_perf_level; + unsigned long flags; + + if ((curr_perf_level == level) && !force) + return prev; + + if (level == CORE_CLK_SRC_DPLL) + dll_ctrl = omap2_memory_get_slow_dll_ctrl(); + else if (level == CORE_CLK_SRC_DPLL_X2) + dll_ctrl = omap2_memory_get_fast_dll_ctrl(); + else + return prev; + + m_type = omap2_memory_get_type(); + + local_irq_save(flags); + __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); + omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); + curr_perf_level = level; + local_irq_restore(flags); + + return prev; +} + +#if !defined(CONFIG_ARCH_OMAP2) +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ +} +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type) +{ +} +#endif + +void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +{ + unsigned long dll_cnt; + u32 fast_dll = 0; + + /* DDR = 1, SDR = 0 */ + mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); + + /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. + * In the case of 2422, its ok to use CS1 instead of CS0. + */ + if (cpu_is_omap2422()) + mem_timings.base_cs = 1; + else + mem_timings.base_cs = 0; + + if (mem_timings.m_type != M_DDR) + return; + + /* With DDR we need to determine the low frequency DLL value */ + if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) + mem_timings.dll_mode = M_UNLOCK; + else + mem_timings.dll_mode = M_LOCK; + + if (mem_timings.base_cs == 0) { + fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00; + } else { + fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00; + } + if (force_lock_to_unlock_mode) { + fast_dll &= ~0xff00; + fast_dll |= dll_cnt; /* Current lock mode */ + } + /* set fast timings with DLL filter disabled */ + mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8)); + + /* No disruptions, DDR will be offline & C-ABI not followed */ + omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, + mem_timings.fast_dll_ctrl, + mem_timings.base_cs, + force_lock_to_unlock_mode); + mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ + + /* Turn status into unlock ctrl */ + mem_timings.slow_dll_ctrl |= + ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); + + /* 90 degree phase for anything below 133Mhz + disable DLL filter */ + mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); +} + +void __init omap2_set_globals_memory(struct omap_globals *omap2_globals) +{ + omap2_sdrc_base = omap2_globals->sdrc; + omap2_sms_base = omap2_globals->sms; +} + +/* turn on smart idle modes for SDRAM scheduler and controller */ +void __init omap2_init_memory(void) +{ + u32 l; + + if (!cpu_is_omap2420()) + return; + + l = sms_read_reg(SMS_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sms_write_reg(l, SMS_SYSCONFIG); + + l = sdrc_read_reg(SDRC_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sdrc_write_reg(l, SDRC_SYSCONFIG); +} -- cgit v0.10.2 From f2ab99778a1a04ddbae38f4de4ef40f2edb92080 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:37 -0700 Subject: [ARM] OMAP2 SDRC: separate common OMAP2/3 code from OMAP2xxx code Separate SDRC code common to OMAP2/3 from mach-omap2/sdrc2xxx.c to mach-omap2/sdrc.c. Rename the OMAP2xxx-specific functions to use an 'omap2xxx' prefix rather than an 'omap2' prefix, and use "sdrc" in the function names rather than "memory." Mark several functions as static that should not be used outside the sdrc2xxx.c file. linux-omap source commit is bf1612b9d8d29379558500cd5de9ae0367c41fc4. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bb47d43..9717afc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := irq.o id.o io.o sdrc2xxx.o control.o prcm.o clock.o mux.o \ +obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \ devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ clockdomain.o @@ -14,6 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# SMS/SDRC +obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o +# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o + # Power Management ifeq ($(CONFIG_PM),y) obj-y += pm.o diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 83911ad..a11e7c7 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -389,9 +389,9 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) mult &= OMAP24XX_CORE_CLK_SRC_MASK; if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); } else if (rate != cur_rate) { valid_rate = omap2_dpllcore_round_rate(rate); if (valid_rate != rate) @@ -430,15 +430,16 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ bypass = 1; - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */ + /* For omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); /* Force dll lock mode */ omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, bypass); /* Errata: ret dll entry state */ - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); } omap2_dpllcore_recalc(&dpll_ck); ret = 0; @@ -525,9 +526,9 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); if (prcm->dpll_speed == cur_rate / 2) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); } else if (prcm->dpll_speed == cur_rate * 2) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); } else if (prcm->dpll_speed != cur_rate) { local_irq_save(flags); @@ -558,14 +559,14 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) cm_write_mod_reg(prcm->cm_clksel_mdm, OMAP2430_MDM_MOD, CM_CLKSEL); - /* x2 to enter init_mem */ - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, bypass); - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); local_irq_restore(flags); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2b5f28a..3c1de36 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -201,6 +201,6 @@ void __init omap2_init_common_hw(void) pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_init_memory(); + omap2_sdrc_init(); gpmc_init(); } diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c new file mode 100644 index 0000000..24b54d5 --- /dev/null +++ b/arch/arm/mach-omap2/sdrc.c @@ -0,0 +1,57 @@ +/* + * SMS/SDRC (SDRAM controller) common code for OMAP2/3 + * + * Copyright (C) 2005, 2008 Texas Instruments Inc. + * Copyright (C) 2005, 2008 Nokia Corporation + * + * Tony Lindgren + * Paul Walmsley + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "prm.h" + +#include +#include "sdrc.h" + +void __iomem *omap2_sdrc_base; +void __iomem *omap2_sms_base; + +void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +{ + omap2_sdrc_base = omap2_globals->sdrc; + omap2_sms_base = omap2_globals->sms; +} + +/* turn on smart idle modes for SDRAM scheduler and controller */ +void __init omap2_sdrc_init(void) +{ + u32 l; + + l = sms_read_reg(SMS_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sms_write_reg(l, SMS_SYSCONFIG); + + l = sdrc_read_reg(SDRC_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sdrc_write_reg(l, SDRC_SYSCONFIG); +} diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 3e38aa4..3a47aba 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -3,11 +3,12 @@ * * SDRAM timing related functions for OMAP2xxx * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff + * Copyright (C) 2005, 2008 Texas Instruments Inc. + * Copyright (C) 2005, 2008 Nokia Corporation * - * Copyright (C) 2005 Nokia Corporation * Tony Lindgren + * Paul Walmsley + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -39,23 +40,20 @@ #define M_LOCK 1 -void __iomem *omap2_sdrc_base; -void __iomem *omap2_sms_base; - static struct memory_timings mem_timings; static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; -u32 omap2_memory_get_slow_dll_ctrl(void) +static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void) { return mem_timings.slow_dll_ctrl; } -u32 omap2_memory_get_fast_dll_ctrl(void) +static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void) { return mem_timings.fast_dll_ctrl; } -u32 omap2_memory_get_type(void) +static u32 omap2xxx_sdrc_get_type(void) { return mem_timings.m_type; } @@ -64,7 +62,7 @@ u32 omap2_memory_get_type(void) * Check the DLL lock state, and return tue if running in unlock mode. * This is needed to compensate for the shifted DLL value in unlock mode. */ -u32 omap2_dll_force_needed(void) +u32 omap2xxx_sdrc_dll_is_unlocked(void) { /* dlla and dllb are a set */ u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL); @@ -79,8 +77,10 @@ u32 omap2_dll_force_needed(void) * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC. * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2) + * + * Used by the clock framework during CORE DPLL changes */ -u32 omap2_reprogram_sdrc(u32 level, u32 force) +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) { u32 dll_ctrl, m_type; u32 prev = curr_perf_level; @@ -90,13 +90,13 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; if (level == CORE_CLK_SRC_DPLL) - dll_ctrl = omap2_memory_get_slow_dll_ctrl(); + dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl(); else if (level == CORE_CLK_SRC_DPLL_X2) - dll_ctrl = omap2_memory_get_fast_dll_ctrl(); + dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl(); else return prev; - m_type = omap2_memory_get_type(); + m_type = omap2xxx_sdrc_get_type(); local_irq_save(flags); __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); @@ -107,18 +107,8 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; } -#if !defined(CONFIG_ARCH_OMAP2) -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ -} -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type) -{ -} -#endif - -void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +/* Used by the clock framework during CORE DPLL changes */ +void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; u32 fast_dll = 0; @@ -171,28 +161,3 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) /* 90 degree phase for anything below 133Mhz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } - -void __init omap2_set_globals_memory(struct omap_globals *omap2_globals) -{ - omap2_sdrc_base = omap2_globals->sdrc; - omap2_sms_base = omap2_globals->sms; -} - -/* turn on smart idle modes for SDRAM scheduler and controller */ -void __init omap2_init_memory(void) -{ - u32 l; - - if (!cpu_is_omap2420()) - return; - - l = sms_read_reg(SMS_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sms_write_reg(l, SMS_SYSCONFIG); - - l = sdrc_read_reg(SDRC_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sdrc_write_reg(l, SDRC_SYSCONFIG); -} diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0843b88..187239c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -249,7 +249,7 @@ static struct omap_globals *omap2_globals; static void __init __omap2_set_globals(void) { omap2_set_globals_tap(omap2_globals); - omap2_set_globals_memory(omap2_globals); + omap2_set_globals_sdrc(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); } diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index ef70e2b..f3444a6 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -65,7 +65,7 @@ void omap2_set_globals_343x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); -void omap2_set_globals_memory(struct omap_globals *); +void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index c905b52..8e0740e 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -4,10 +4,12 @@ /* * OMAP2/3 SDRC/SMS register definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Tony Lindgren + * Paul Walmsley + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -64,18 +66,25 @@ * SMS register access */ - -#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg) +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ #define SMS_SYSCONFIG 0x010 /* REVISIT: fill in other SMS registers here */ + #ifndef __ASSEMBLER__ +void __init omap2_sdrc_init(void); + +#ifdef CONFIG_ARCH_OMAP2 + struct memory_timings { u32 m_type; /* ddr = 1, sdr = 0 */ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ @@ -84,15 +93,13 @@ struct memory_timings { u32 base_cs; /* base chip select to use for calculations */ }; -extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); -extern u32 omap2_memory_get_slow_dll_ctrl(void); -extern u32 omap2_memory_get_fast_dll_ctrl(void); -extern u32 omap2_memory_get_type(void); -u32 omap2_dll_force_needed(void); -u32 omap2_reprogram_sdrc(u32 level, u32 force); -void __init omap2_init_memory(void); +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -#endif +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + +#endif /* CONFIG_ARCH_OMAP2 */ +#endif /* __ASSEMBLER__ */ #endif -- cgit v0.10.2 From 87246b7567f7d1951bfcea29875523ef435c0ebf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:39 -0700 Subject: [ARM] OMAP2 SDRC: add SDRAM timing parameter infrastructure For a given SDRAM clock rate, SDRAM chips require memory controllers to use a specific set of timing minimums and maximums to transfer data reliably. These parameters can be different for different memory chips and can also potentially vary by board. This patch adds the infrastructure for board-*.c files to pass this timing data to the SDRAM controller init function. The timing data is specified in an 'omap_sdrc_params' structure, in terms of SDRC controller register values. An array of these structs, one per SDRC target clock rate, is passed by the board-*.c file to omap2_init_common_hw(). This patch does not define the values for different memory chips, nor does it use the values for anything; those will come in subsequent patches. linux-omap source commit is bc84ecfc795c2d1c5cda8da4127cf972f488a696. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 83fa372..7b29e1d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -185,7 +185,7 @@ out: static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); sdp2430_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 0a7b24ba..0c911f4 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -249,7 +249,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3b34c20..3492162 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5e9b146..ef55b45 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -363,7 +363,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f6a1345..61f7c36 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -98,7 +98,7 @@ static inline void __init ldp_init_smc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fb..ad312cc 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -184,7 +184,7 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3c1de36..916fcd3 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -195,12 +195,12 @@ void __init omap2_map_common_io(void) omapfb_reserve_sdram(); } -void __init omap2_init_common_hw(void) +void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(); + omap2_sdrc_init(sp); gpmc_init(); } diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 24b54d5..2a30060 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -12,6 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#undef DEBUG #include #include @@ -31,9 +32,42 @@ #include #include "sdrc.h" +static struct omap_sdrc_params *sdrc_init_params; + void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; + +/** + * omap2_sdrc_get_params - return SDRC register values for a given clock rate + * @r: SDRC clock rate (in Hz) + * + * Return pre-calculated values for the SDRC_ACTIM_CTRLA, + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given + * SDRC clock rate 'r'. These parameters control various timing + * delays in the SDRAM controller that are expressed in terms of the + * number of SDRC clock cycles to wait; hence the clock rate + * dependency. Note that sdrc_init_params must be sorted rate + * descending. Also assumes that both chip-selects use the same + * timing parameters. Returns a struct omap_sdrc_params * upon + * success, or NULL upon failure. + */ +struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +{ + struct omap_sdrc_params *sp; + + sp = sdrc_init_params; + + while (sp->rate != r) + sp++; + + if (!sp->rate) + return NULL; + + return sp; +} + + void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) { omap2_sdrc_base = omap2_globals->sdrc; @@ -41,7 +75,7 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) } /* turn on smart idle modes for SDRAM scheduler and controller */ -void __init omap2_sdrc_init(void) +void __init omap2_sdrc_init(struct omap_sdrc_params *sp) { u32 l; @@ -54,4 +88,6 @@ void __init omap2_sdrc_init(void) l &= ~(0x3 << 3); l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); + + sdrc_init_params = sp; } diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index d92bf79..0610d7e 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -185,11 +185,13 @@ #define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) #define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) +struct omap_sdrc_params; + extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(void); +extern void omap2_init_common_hw(struct omap_sdrc_params *sp); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 8e0740e..adc7352 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -81,7 +81,29 @@ #ifndef __ASSEMBLER__ -void __init omap2_sdrc_init(void); +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +void __init omap2_sdrc_init(struct omap_sdrc_params *sp); +struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); #ifdef CONFIG_ARCH_OMAP2 -- cgit v0.10.2 From 0eafd4725cf5d828e76e474b8991a228bbdd3f2b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:42 -0700 Subject: [ARM] OMAP3 clock: add omap3_core_dpll_m2_set_rate() Add the omap3_core_dpll_m2_set_rate() function to the OMAP3 clock code, which calls into the SRAM function omap3_sram_configure_core_dpll() to change the CORE DPLL M2 divider. (SRAM code is necessary since rate changes on clocks upstream from the SDRC can glitch SDRAM accesses.) Use this function for the set_rate function pointer in the dpll3_m2_ck struct clk. With this function in place, PM/OPP code should be able to alter SDRAM speed via code similar to: clk_set_rate(&dpll3_m2_ck, target_rate). linux-omap source commit is 7f8b2b0f4fe52238c67d79dedcd2794dcef4dddd. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 52385b1..1ad0a13 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -634,6 +634,71 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) return omap3_noncore_dpll_set_rate(clk, rate); } + +/* + * CORE DPLL (DPLL3) rate programming functions + * + * These call into SRAM code to do the actual CM writes, since the SDRAM + * is clocked from DPLL3. + */ + +/** + * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Program the DPLL M2 divider with the rounded target rate. Returns + * -EINVAL upon error, or 0 upon success. + */ +static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div = 0; + unsigned long validrate, sdrcrate; + struct omap_sdrc_params *sp; + + if (!clk || !rate) + return -EINVAL; + + if (clk != &dpll3_m2_ck) + return -EINVAL; + + if (rate == clk->rate) + return 0; + + validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + if (validrate != rate) + return -EINVAL; + + sdrcrate = sdrc_ick.rate; + if (rate > clk->rate) + sdrcrate <<= ((rate / clk->rate) - 1); + else + sdrcrate >>= ((clk->rate / rate) - 1); + + sp = omap2_sdrc_get_params(sdrcrate); + if (!sp) + return -EINVAL; + + pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_info("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + + /* REVISIT: SRAM code doesn't support other M2 divisors yet */ + WARN_ON(new_div != 1 && new_div != 2); + + /* REVISIT: Add SDRC_MR changing to this code also */ + local_irq_disable(); + omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, + sp->actim_ctrlb, new_div); + local_irq_enable(); + + omap2_clksel_recalc(clk); + + return 0; +} + + static const struct clkops clkops_noncore_dpll_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index aadd296..681acf0 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -34,6 +34,7 @@ static void omap3_dpll_deny_idle(struct clk *clk); static u32 omap3_dpll_autoidle_read(struct clk *clk); static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); +static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); /* Maximum DPLL multiplier, divider values for OMAP3 */ #define OMAP3_MAX_DPLL_MULT 2048 @@ -471,11 +472,7 @@ static const struct clksel div31_dpll3m2_clksel[] = { { .parent = NULL } }; -/* - * DPLL3 output M2 - * REVISIT: This DPLL output divider must be changed in SRAM, so until - * that code is ready, this should remain a 'read-only' clksel clock. - */ +/* DPLL3 output M2 - primary control point for CORE speed */ static struct clk dpll3_m2_ck = { .name = "dpll3_m2_ck", .ops = &clkops_null, @@ -486,6 +483,8 @@ static struct clk dpll3_m2_ck = { .clksel = div31_dpll3m2_clksel, .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap3_core_dpll_m2_set_rate, .recalc = &omap2_clksel_recalc, }; -- cgit v0.10.2 From 8463e20a58e8b8c88fab948b8610504cbf604294 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 28 Jan 2009 12:27:45 -0700 Subject: [ARM] OMAP3: PM: Make sure clk_disable_unused() order is correct Current implementation will disable clocks in the order defined in clock34xx.h, at least DPLL4_M2X2 will hang in certain cases (and prevent retention / off) if clocks are not disabled in correct order. This patch makes sure the parent clocks will be active when disabling a clock. linux-omap source commit is 672680063420ef8c8c4e7271984bb9cc08171d29. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 18fddb6..478ca66 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -1000,6 +1000,10 @@ void omap2_clk_disable_unused(struct clk *clk) return; printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); - _omap2_clk_disable(clk); + if (cpu_is_omap34xx()) { + omap2_clk_enable(clk); + omap2_clk_disable(clk); + } else + _omap2_clk_disable(clk); } #endif -- cgit v0.10.2 From 7b0f89d7bba946345fd597110388da5a913e9744 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:27:48 -0700 Subject: [ARM] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init() Use the standard clk_set_rate() function in omap2_clk_arch_init() rather than omap2_select_table_rate() -- this will ensure that clock rates are recalculated and propagated correctly after those operations are consolidated into clk_set_rate(). linux-omap source commit is 03c03330017eeb445b01957608ff5db49a7151b6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index a11e7c7..2ce8c02 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -688,7 +688,7 @@ static int __init omap2_clk_arch_init(void) if (!mpurate) return -EINVAL; - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); recalculate_root_clocks(); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1ad0a13..06a81fe 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -866,7 +866,7 @@ static int __init omap2_clk_arch_init(void) /* REVISIT: not yet ready for 343x */ #if 0 - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); #endif -- cgit v0.10.2 From b5088c0d90b898802318c62caf2320a53df6ce57 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Jan 2009 19:33:19 +0000 Subject: [ARM] omap: clks: call recalc after any rate change This implements the remainder of: OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c from Paul Walmsley which is not covered by the previous: [ARM] omap: move clock propagation into core omap clock code [ARM] omap: remove unnecessary calls to propagate_rate() [ARM] omap: move propagate_rate() calls into generic omap clock code commits. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 2ce8c02..4564ae3 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -441,7 +441,6 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); omap2xxx_sdrc_reprogram(done_rate, 0); } - omap2_dpllcore_recalc(&dpll_ck); ret = 0; dpll_exit: @@ -570,7 +569,6 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) local_irq_restore(flags); } - omap2_dpllcore_recalc(&dpll_ck); return 0; } diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 06a81fe..75eb254 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -614,8 +614,6 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n, freqsel); - omap3_dpll_recalc(clk); - return 0; } @@ -693,8 +691,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sp->actim_ctrlb, new_div); local_irq_enable(); - omap2_clksel_recalc(clk); - return 0; } diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 5272a22..54da27a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -140,8 +140,12 @@ int clk_set_rate(struct clk *clk, unsigned long rate) spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_rate) ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0 && (clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + if (ret == 0) { + if (clk->recalc) + clk->recalc(clk); + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); + } spin_unlock_irqrestore(&clockfw_lock, flags); return ret; @@ -159,8 +163,12 @@ int clk_set_parent(struct clk *clk, struct clk *parent) spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_parent) ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0 && (clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + if (ret == 0) { + if (clk->recalc) + clk->recalc(clk); + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); + } spin_unlock_irqrestore(&clockfw_lock, flags); return ret; -- cgit v0.10.2 From 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 31 Jan 2009 10:05:51 +0000 Subject: [ARM] omap: create a proper tree of clocks Traditionally, we've tracked the parent/child relationships between clk structures by setting the child's parent member to point at the upstream clock. As a result, when decending the tree, we have had to scan all clocks to find the children. Avoid this wasteful scanning by keeping a list of the clock's children. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 1e477af..ccf989f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -782,6 +782,9 @@ int __init omap1_clk_init(void) /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_init_one(c->lk.clk); + cpu_mask = 0; if (cpu_is_omap16xx()) cpu_mask |= CK_16XX; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 1b4dd05..28bc74e 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -155,7 +155,6 @@ static struct clk ck_dpll1 = { .name = "ck_dpll1", .ops = &clkops_null, .parent = &ck_ref, - .flags = RATE_PROPAGATES, }; static struct arm_idlect1_clk ck_dpll1out = { @@ -163,8 +162,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .name = "ck_dpll1out", .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | - ENABLE_REG_32BIT | RATE_PROPAGATES, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, @@ -187,7 +185,6 @@ static struct clk arm_ck = { .name = "arm_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = RATE_PROPAGATES, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -328,7 +325,7 @@ static struct arm_idlect1_clk tc_ck = { .name = "tc_ck", .ops = &clkops_null, .parent = &ck_dpll1, - .flags = RATE_PROPAGATES | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 478ca66..38a7898 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -175,7 +175,7 @@ void omap2_init_clksel_parent(struct clk *clk) clk->name, clks->parent->name, ((clk->parent) ? clk->parent->name : "NULL")); - clk->parent = clks->parent; + clk_reparent(clk, clks->parent); }; found = 1; } @@ -780,7 +780,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) if (clk->usecount > 0) _omap2_clk_enable(clk); - clk->parent = new_parent; + clk_reparent(clk, new_parent); /* CLKSEL clocks follow their parents' rates, divided by a divisor */ clk->rate = new_parent->rate; diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 4564ae3..1a88597 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -718,6 +718,9 @@ int __init omap2_clk_init(void) omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + cpu_mask = 0; if (cpu_is_omap2420()) cpu_mask |= CK_242X; diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 7731ab6..7594898 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -621,7 +621,7 @@ static struct clk func_32k_ck = { .name = "func_32k_ck", .ops = &clkops_null, .rate = 32000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, .clkdm_name = "wkup_clkdm", }; @@ -629,7 +629,6 @@ static struct clk func_32k_ck = { static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .ops = &clkops_oscck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_osc_clk_recalc, }; @@ -639,7 +638,6 @@ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ .ops = &clkops_null, .parent = &osc_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; @@ -648,7 +646,7 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .name = "alt_ck", .ops = &clkops_null, .rate = 54000000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, .clkdm_name = "wkup_clkdm", }; @@ -680,7 +678,6 @@ static struct clk dpll_ck = { .ops = &clkops_null, .parent = &sys_ck, /* Can be func_32k also */ .dpll_data = &dpll_dd, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, @@ -691,7 +688,7 @@ static struct clk apll96_ck = { .ops = &clkops_fixed, .parent = &sys_ck, .rate = 96000000, - .flags = RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, @@ -702,7 +699,7 @@ static struct clk apll54_ck = { .ops = &clkops_fixed, .parent = &sys_ck, .rate = 54000000, - .flags = RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, @@ -734,7 +731,6 @@ static struct clk func_54m_ck = { .name = "func_54m_ck", .ops = &clkops_null, .parent = &apll54_ck, /* can also be alt_clk */ - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -747,7 +743,6 @@ static struct clk core_ck = { .name = "core_ck", .ops = &clkops_null, .parent = &dpll_ck, /* can also be 32k */ - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -774,7 +769,6 @@ static struct clk func_96m_ck = { .name = "func_96m_ck", .ops = &clkops_null, .parent = &apll96_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -807,7 +801,6 @@ static struct clk func_48m_ck = { .name = "func_48m_ck", .ops = &clkops_null, .parent = &apll96_ck, /* 96M or Alt */ - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -823,7 +816,6 @@ static struct clk func_12m_ck = { .ops = &clkops_null, .parent = &func_48m_ck, .fixed_div = 4, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -876,7 +868,6 @@ static struct clk sys_clkout_src = { .name = "sys_clkout_src", .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, @@ -921,7 +912,6 @@ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, @@ -992,7 +982,7 @@ static struct clk mpu_ck = { /* Control cpu */ .name = "mpu_ck", .ops = &clkops_null, .parent = &core_ck, - .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), @@ -1034,7 +1024,7 @@ static struct clk dsp_fck = { .name = "dsp_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "dsp_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, @@ -1102,7 +1092,7 @@ static struct clk iva1_ifck = { .name = "iva1_ifck", .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .flags = CONFIG_PARTICIPANT | DELAYED_APP, .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, @@ -1165,7 +1155,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .name = "core_l3_ck", .ops = &clkops_null, .parent = &core_ck, - .flags = DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, @@ -1227,7 +1217,7 @@ static struct clk l4_ck = { /* used both as an ick and fck */ .name = "l4_ck", .ops = &clkops_null, .parent = &core_l3_ck, - .flags = DELAYED_APP | RATE_PROPAGATES, + .flags = DELAYED_APP, .clkdm_name = "core_l4_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 75eb254..a853b1e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -904,6 +904,9 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + clk_init_one(c->lk.clk); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) if (c->cpu & cpu_clkflg) { clkdev_add(&c->lk); clk_register(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 681acf0..2138a58 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -60,14 +60,14 @@ static struct clk omap_32k_fck = { .name = "omap_32k_fck", .ops = &clkops_null, .rate = 32768, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk secure_32k_fck = { .name = "secure_32k_fck", .ops = &clkops_null, .rate = 32768, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; /* Virtual source clocks for osc_sys_ck */ @@ -75,42 +75,42 @@ static struct clk virt_12m_ck = { .name = "virt_12m_ck", .ops = &clkops_null, .rate = 12000000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk virt_13m_ck = { .name = "virt_13m_ck", .ops = &clkops_null, .rate = 13000000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk virt_16_8m_ck = { .name = "virt_16_8m_ck", .ops = &clkops_null, .rate = 16800000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk virt_19_2m_ck = { .name = "virt_19_2m_ck", .ops = &clkops_null, .rate = 19200000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk virt_26m_ck = { .name = "virt_26m_ck", .ops = &clkops_null, .rate = 26000000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", .ops = &clkops_null, .rate = 38400000, - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, }; static const struct clksel_rate osc_sys_12m_rates[] = { @@ -163,7 +163,7 @@ static struct clk osc_sys_ck = { .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, .clksel = osc_sys_clksel, /* REVISIT: deal with autoextclkmode? */ - .flags = RATE_FIXED | RATE_PROPAGATES, + .flags = RATE_FIXED, .recalc = &omap2_clksel_recalc, }; @@ -188,21 +188,18 @@ static struct clk sys_ck = { .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, .clksel_mask = OMAP_SYSCLKDIV_MASK, .clksel = sys_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; static struct clk sys_altclk = { .name = "sys_altclk", .ops = &clkops_null, - .flags = RATE_PROPAGATES, }; /* Optional external clock input for some McBSPs */ static struct clk mcbsp_clks = { .name = "mcbsp_clks", .ops = &clkops_null, - .flags = RATE_PROPAGATES, }; /* PRM EXTERNAL CLOCK OUTPUT */ @@ -279,7 +276,6 @@ static struct clk dpll1_ck = { .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll1_dd, - .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, .clkdm_name = "dpll1_clkdm", @@ -294,7 +290,6 @@ static struct clk dpll1_x2_ck = { .name = "dpll1_x2_ck", .ops = &clkops_null, .parent = &dpll1_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll1_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -317,7 +312,6 @@ static struct clk dpll1_x2m2_ck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll1_x2m2_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll1_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -353,7 +347,6 @@ static struct clk dpll2_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll2_dd, - .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, .clkdm_name = "dpll2_clkdm", @@ -378,7 +371,6 @@ static struct clk dpll2_m2_ck = { OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll2_m2x2_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -413,7 +405,6 @@ static struct clk dpll3_ck = { .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll3_dd, - .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .clkdm_name = "dpll3_clkdm", .recalc = &omap3_dpll_recalc, @@ -427,7 +418,6 @@ static struct clk dpll3_x2_ck = { .name = "dpll3_x2_ck", .ops = &clkops_null, .parent = &dpll3_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -481,7 +471,6 @@ static struct clk dpll3_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, .clksel = div31_dpll3m2_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", .round_rate = &omap2_clksel_round_rate, .set_rate = &omap3_core_dpll_m2_set_rate, @@ -501,7 +490,6 @@ static struct clk core_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = core_ck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -518,7 +506,6 @@ static struct clk dpll3_m2x2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = dpll3_m2x2_ck_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -538,7 +525,6 @@ static struct clk dpll3_m3_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL3_MASK, .clksel = div16_dpll3_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -550,7 +536,7 @@ static struct clk dpll3_m3x2_ck = { .parent = &dpll3_m3_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -569,7 +555,6 @@ static struct clk emu_core_alwon_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, .clksel = emu_core_alwon_ck_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -603,7 +588,6 @@ static struct clk dpll4_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll4_dd, - .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_dpll4_set_rate, .clkdm_name = "dpll4_clkdm", @@ -619,7 +603,6 @@ static struct clk dpll4_x2_ck = { .name = "dpll4_x2_ck", .ops = &clkops_null, .parent = &dpll4_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -638,7 +621,6 @@ static struct clk dpll4_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), .clksel_mask = OMAP3430_DIV_96M_MASK, .clksel = div16_dpll4_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -650,7 +632,7 @@ static struct clk dpll4_m2x2_ck = { .parent = &dpll4_m2_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -675,7 +657,6 @@ static struct clk omap_96m_alwon_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = omap_96m_alwon_fck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -683,7 +664,6 @@ static struct clk cm_96m_fck = { .name = "cm_96m_fck", .ops = &clkops_null, .parent = &omap_96m_alwon_fck, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -711,7 +691,6 @@ static struct clk omap_96m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_96M_MASK, .clksel = omap_96m_fck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -724,7 +703,6 @@ static struct clk dpll4_m3_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_TV_MASK, .clksel = div16_dpll4_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -737,7 +715,7 @@ static struct clk dpll4_m3x2_ck = { .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -756,7 +734,6 @@ static struct clk virt_omap_54m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = virt_omap_54m_fck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -783,7 +760,6 @@ static struct clk omap_54m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_54M_MASK, .clksel = omap_54m_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -810,7 +786,6 @@ static struct clk omap_48m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_SOURCE_48M_MASK, .clksel = omap_48m_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -819,7 +794,6 @@ static struct clk omap_12m_fck = { .ops = &clkops_null, .parent = &omap_48m_fck, .fixed_div = 4, - .flags = RATE_PROPAGATES, .recalc = &omap2_fixed_divisor_recalc, }; @@ -832,7 +806,6 @@ static struct clk dpll4_m4_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, .clksel = div16_dpll4_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, .set_rate = &omap2_clksel_set_rate, @@ -846,7 +819,7 @@ static struct clk dpll4_m4x2_ck = { .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -860,7 +833,6 @@ static struct clk dpll4_m5_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -872,7 +844,7 @@ static struct clk dpll4_m5x2_ck = { .parent = &dpll4_m5_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -886,7 +858,6 @@ static struct clk dpll4_m6_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL4_MASK, .clksel = div16_dpll4_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -899,7 +870,7 @@ static struct clk dpll4_m6x2_ck = { .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -908,7 +879,6 @@ static struct clk emu_per_alwon_ck = { .name = "emu_per_alwon_ck", .ops = &clkops_null, .parent = &dpll4_m6x2_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll4_clkdm", .recalc = &followparent_recalc, }; @@ -943,7 +913,6 @@ static struct clk dpll5_ck = { .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll5_dd, - .flags = RATE_PROPAGATES, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, .clkdm_name = "dpll5_clkdm", @@ -963,7 +932,6 @@ static struct clk dpll5_m2_ck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), .clksel_mask = OMAP3430ES2_DIV_120M_MASK, .clksel = div16_dpll5_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "dpll5_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -982,7 +950,6 @@ static struct clk omap_120m_fck = { .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .clksel = omap_120m_fck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1025,7 +992,6 @@ static struct clk clkout2_src_ck = { .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, .clksel = clkout2_src_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "core_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1060,7 +1026,6 @@ static struct clk corex2_fck = { .name = "corex2_fck", .ops = &clkops_null, .parent = &dpll3_m2x2_ck, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1090,7 +1055,6 @@ static struct clk dpll1_fck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, .clksel = div4_core_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1114,7 +1078,6 @@ static struct clk mpu_ck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = mpu_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "mpu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1139,7 +1102,6 @@ static struct clk arm_fck = { .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = arm_fck_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1153,7 +1115,6 @@ static struct clk emu_mpu_alwon_ck = { .name = "emu_mpu_alwon_ck", .ops = &clkops_null, .parent = &mpu_ck, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1165,7 +1126,6 @@ static struct clk dpll2_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, .clksel = div4_core_clksel, - .flags = RATE_PROPAGATES, .recalc = &omap2_clksel_recalc, }; @@ -1193,7 +1153,6 @@ static struct clk iva2_ck = { OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, .clksel = iva2_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "iva2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1213,7 +1172,6 @@ static struct clk l3_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L3_MASK, .clksel = div2_core_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1231,7 +1189,6 @@ static struct clk l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L4_MASK, .clksel = div2_l3_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1281,7 +1238,6 @@ static struct clk gfx_l3_fck = { .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1440,7 +1396,6 @@ static struct clk core_96m_fck = { .name = "core_96m_fck", .ops = &clkops_null, .parent = &omap_96m_fck, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1574,7 +1529,6 @@ static struct clk core_48m_fck = { .name = "core_48m_fck", .ops = &clkops_null, .parent = &omap_48m_fck, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1652,7 +1606,6 @@ static struct clk core_12m_fck = { .name = "core_12m_fck", .ops = &clkops_null, .parent = &omap_12m_fck, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1692,7 +1645,6 @@ static struct clk ssi_ssr_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, .clksel = ssi_ssr_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1718,7 +1670,6 @@ static struct clk core_l3_ick = { .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1759,7 +1710,6 @@ static struct clk security_l3_ick = { .name = "security_l3_ick", .ops = &clkops_null, .parent = &l3_ick, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -1779,7 +1729,6 @@ static struct clk core_l4_ick = { .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2062,7 +2011,6 @@ static struct clk ssi_l4_ick = { .name = "ssi_l4_ick", .ops = &clkops_null, .parent = &l4_ick, - .flags = RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2106,7 +2054,6 @@ static struct clk security_l4_ick2 = { .name = "security_l4_ick2", .ops = &clkops_null, .parent = &l4_ick, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2350,7 +2297,6 @@ static struct clk wkup_32k_fck = { .ops = &clkops_null, .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2379,7 +2325,6 @@ static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", .ops = &clkops_null, .parent = &sys_ck, - .flags = RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2466,7 +2411,6 @@ static struct clk per_96m_fck = { .ops = &clkops_null, .parent = &omap_96m_alwon_fck, .init = &omap2_init_clk_clkdm, - .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2476,7 +2420,6 @@ static struct clk per_48m_fck = { .ops = &clkops_null, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, - .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2600,7 +2543,6 @@ static struct clk per_32k_alwon_fck = { .ops = &clkops_null, .parent = &omap_32k_fck, .clkdm_name = "per_clkdm", - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -2668,7 +2610,6 @@ static struct clk per_l4_ick = { .name = "per_l4_ick", .ops = &clkops_null, .parent = &l4_ick, - .flags = RATE_PROPAGATES, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2948,7 +2889,6 @@ static struct clk emu_src_ck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2973,7 +2913,6 @@ static struct clk pclk_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2997,7 +2936,6 @@ static struct clk pclkx2_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3014,7 +2952,6 @@ static struct clk atclk_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3026,7 +2963,6 @@ static struct clk traceclk_src_fck = { .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = RATE_PROPAGATES, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3063,7 +2999,6 @@ static struct clk sr1_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR1_SHIFT, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; @@ -3074,7 +3009,6 @@ static struct clk sr2_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR2_SHIFT, - .flags = RATE_PROPAGATES, .recalc = &followparent_recalc, }; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 54da27a..6a1737a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -143,8 +143,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (ret == 0) { if (clk->recalc) clk->recalc(clk); - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); + propagate_rate(clk); } spin_unlock_irqrestore(&clockfw_lock, flags); @@ -166,8 +165,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) if (ret == 0) { if (clk->recalc) clk->recalc(clk); - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); + propagate_rate(clk); } spin_unlock_irqrestore(&clockfw_lock, flags); @@ -214,24 +212,31 @@ void followparent_recalc(struct clk *clk) clk->rate = clk->parent->rate; } +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + /* Propagate rate to children */ void propagate_rate(struct clk * tclk) { struct clk *clkp; - if (tclk == NULL || IS_ERR(tclk)) - return; - - list_for_each_entry(clkp, &clocks, node) { - if (likely(clkp->parent != tclk)) - continue; + list_for_each_entry(clkp, &tclk->children, sibling) { if (clkp->recalc) clkp->recalc(clkp); - if (clkp->flags & RATE_PROPAGATES) - propagate_rate(clkp); + propagate_rate(clkp); } } +static LIST_HEAD(root_clks); + /** * recalculate_root_clocks - recalculate and propagate all root clocks * @@ -243,16 +248,18 @@ void recalculate_root_clocks(void) { struct clk *clkp; - list_for_each_entry(clkp, &clocks, node) { - if (!clkp->parent) { - if (clkp->recalc) - clkp->recalc(clkp); - if (clkp->flags & RATE_PROPAGATES) - propagate_rate(clkp); - } + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->recalc(clkp); + propagate_rate(clkp); } } +void clk_init_one(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) @@ -265,6 +272,11 @@ int clk_register(struct clk *clk) return 0; mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + list_add(&clk->node, &clocks); if (clk->init) clk->init(clk); @@ -280,6 +292,7 @@ void clk_unregister(struct clk *clk) return; mutex_lock(&clocks_mutex); + list_del(&clk->sibling); list_del(&clk->node); mutex_unlock(&clocks_mutex); } diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 8705902..af6ae4f 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -70,6 +70,8 @@ struct clk { const char *name; int id; struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ unsigned long rate; __u32 flags; void __iomem *enable_reg; @@ -115,7 +117,9 @@ struct clk_functions { extern unsigned int mpurate; extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_init_one(struct clk *clk); extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); @@ -131,8 +135,7 @@ extern const struct clkops clkops_null; /* Clock flags */ /* bit 0 is free */ #define RATE_FIXED (1 << 1) /* Fixed clock rate */ -#define RATE_PROPAGATES (1 << 2) /* Program children too */ -/* bits 3-4 are free */ +/* bits 2-4 are free */ #define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 7) #define CLOCK_NO_IDLE_PARENT (1 << 8) -- cgit v0.10.2 From de07fedd79999668c4c112a2ba3eaf3d7434235c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:35:01 -0700 Subject: [ARM] OMAP2/3 clock: don't use a barrier after clk_disable() clk_disable() previously used an ARM barrier, wmb(), to try to ensure that the hardware write completed before continuing. There are some problems with this approach. The first problem is that wmb() only ensures that the write leaves the ARM -- not that it actually reaches the endpoint device. In this case, the endpoint device - either the PRM, CM, or SCM - is three interconnects away from the ARM, and the final interconnect is low-speed. And the OCP interconnects will post the write, who knows how long that will take to complete. So the wmb() is not really what we want. Worse, the wmb() is indiscriminate; it will cause the ARM to flush any other unrelated buffered writes and wait for the local interconnect to acknowledge them - potentially very expensive. This first problem could be fixed by doing a readback of the same PRM/CM/SCM register. Since these devices use a single OCP thread, this will cause the MPU to wait for the write to complete. But the primary problem is a conceptual one: clk_disable() should not need any kind of barrier. clk_enable() needs one since device driver code must not access a device until its clocks are known to be enabled. But clk_disable() has no such restriction. Since blocking the MPU on a PRM/CM/SCM write can be a very high-latency operation - several hundred MPU cycles - it's worth avoiding this barrier if possible. linux-omap source commit is f4aacad2c0ed1055622d5c1e910befece24ef0e2. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 38a7898..0803c8c 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -353,7 +353,7 @@ static void omap2_dflt_clk_disable(struct clk *clk) else v &= ~(1 << clk->enable_bit); __raw_writel(v, clk->enable_reg); - wmb(); + /* No OCP barrier needed here since it is a disable operation */ } const struct clkops clkops_omap2_dflt_wait = { -- cgit v0.10.2 From 439764cc18beb20ef409991e75e29b460db71d33 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:35:03 -0700 Subject: [ARM] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier Consolidate the commit code for DELAYED_APP clocks into a subroutine, _omap2xxx_clk_commit(). Also convert the MPU barrier wmb() into an OCP barrier, since with an MPU barrier, we have no guarantee that the write actually reached the endpoint device. linux-omap source commit is 0f5bdb736515801b296125d16937a21ff7b3cfdc. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 0803c8c..7f12230 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -74,6 +74,28 @@ u8 cpu_mask; * OMAP2/3 specific clock functions *-------------------------------------------------------------------------*/ +/** + * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware + * @clk: struct clk * + * + * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes + * don't take effect until the VALID_CONFIG bit is written, write the + * VALID_CONFIG bit and wait for the write to complete. No return value. + */ +static void _omap2xxx_clk_commit(struct clk *clk) +{ + if (!cpu_is_omap24xx()) + return; + + if (!(clk->flags & DELAYED_APP)) + return; + + prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, + OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + /* OCP barrier */ + prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); +} + /* * _dpll_test_fint - test whether an Fint value is valid for the DPLL * @clk: DPLL struct clk to test @@ -685,11 +707,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) clk->rate = clk->parent->rate / new_div; - if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { - prm_write_mod_reg(OMAP24XX_VALID_CONFIG, - OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); - wmb(); - } + _omap2xxx_clk_commit(clk); return 0; } @@ -772,10 +790,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) __raw_writel(v, clk->clksel_reg); wmb(); - if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { - __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); - wmb(); - } + _omap2xxx_clk_commit(clk); if (clk->usecount > 0) _omap2_clk_enable(clk); -- cgit v0.10.2 From f11fda6a9173e8e6b152ba5cb26fa20095a4c60f Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:35:06 -0700 Subject: [ARM] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers Several parts of the OMAP2/3 clock code use wmb() to try to ensure that the hardware write completes before continuing. This approach is problematic: wmb() only ensures that the write leaves the ARM. It does not ensure that the write actually reaches the endpoint device. The endpoint device in this case - either the PRM, CM, or SCM - is three interconnects away from the ARM - and the final interconnect is low-speed. And the OCP interconnects will post the write, and who knows how long that will take to complete. So the wmb() is not what we want. Worse, the wmb() is indiscriminate; it causes the ARM to flush any other unrelated buffered writes and wait for the local interconnect to acknowledge them - potentially very expensive. Fix this by converting the wmb()s into readbacks of the same PRM/CM/SCM register. Since the PRM/CM/SCM devices use a single OCP thread, this will cause the MPU to block while waiting for posted writes to that device to complete. linux-omap source commit is 260f5487848681b4d8ea7430a709a601bbcb21d1. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 7f12230..666274a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -334,7 +334,7 @@ static int omap2_dflt_clk_enable(struct clk *clk) else v |= (1 << clk->enable_bit); __raw_writel(v, clk->enable_reg); - wmb(); + v = __raw_readl(clk->enable_reg); /* OCP barrier */ return 0; } @@ -703,7 +703,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) v &= ~clk->clksel_mask; v |= field_val << __ffs(clk->clksel_mask); __raw_writel(v, clk->clksel_reg); - wmb(); + v = __raw_readl(clk->clksel_reg); /* OCP barrier */ clk->rate = clk->parent->rate / new_div; @@ -788,7 +788,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) v &= ~clk->clksel_mask; v |= field_val << __ffs(clk->clksel_mask); __raw_writel(v, clk->clksel_reg); - wmb(); + v = __raw_readl(clk->clksel_reg); /* OCP barrier */ _omap2xxx_clk_commit(clk); -- cgit v0.10.2 From be5f34b77355b9b1720a88390e51441ef578720b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:35:09 -0700 Subject: [ARM] OMAP clock: drop clk_get_usecount() This function is race-prone and mistakenly conveys the impression to drivers that it is part of the clock interface. Get rid of it: core code that absolutely needs this can just check clk->usecount. Drivers should not use it at all. linux-omap source commit is 5df9e4adc2f6a6d55aca53ee27b8baad18897c05. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 6a1737a..9833d73 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -76,22 +76,6 @@ out: } EXPORT_SYMBOL(clk_disable); -int clk_get_usecount(struct clk *clk) -{ - unsigned long flags; - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->usecount; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_usecount); - unsigned long clk_get_rate(struct clk *clk) { unsigned long flags; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index af6ae4f..0ba2846 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -124,7 +124,6 @@ extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); extern void followparent_recalc(struct clk *clk); -extern int clk_get_usecount(struct clk *clk); extern void clk_enable_init_clocks(void); #ifdef CONFIG_CPU_FREQ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -- cgit v0.10.2 From a7f8c599c570fc0e2396e8fdccaeeeaefc41dac8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 31 Jan 2009 11:00:17 +0000 Subject: [ARM] omap: fix usecount decrement bug Based upon a patch from Paul Walmsley : If _omap2_clk_enable() fails, the clock's usecount must be decremented by one no matter whether the clock has a parent or not. but reorganised a bit. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 666274a..222c2c0 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -419,30 +419,30 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { - if (clk->parent) + if (clk->parent) { ret = omap2_clk_enable(clk->parent); - - if (ret != 0) { - clk->usecount--; - return ret; + if (ret) + goto err; } if (clk->clkdm) omap2_clkdm_clk_enable(clk->clkdm, clk); ret = _omap2_clk_enable(clk); - - if (ret != 0) { + if (ret) { if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); - if (clk->parent) { + if (clk->parent) omap2_clk_disable(clk->parent); - clk->usecount--; - } + + goto err; } } + return ret; +err: + clk->usecount--; return ret; } -- cgit v0.10.2 From 8263e5b31eae2bbf689ff08a7da334329c9f353b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 31 Jan 2009 11:02:37 +0000 Subject: [ARM] omap: fix clockdomain enable/disable ordering Based on a patch from Paul Walmsley : omap2_clk_enable() should enable a clock's clockdomain before attempting to enable its parent clock's clockdomain. Similarly, in the unlikely event that the parent clock enable fails, the clockdomain should be disabled. linux-omap source commit is 6d6e285e5a7912b1ea68fadac387304c914aaba8. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 222c2c0..1b40d75 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -419,20 +419,17 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { + if (clk->clkdm) + omap2_clkdm_clk_enable(clk->clkdm, clk); + if (clk->parent) { ret = omap2_clk_enable(clk->parent); if (ret) goto err; } - if (clk->clkdm) - omap2_clkdm_clk_enable(clk->clkdm, clk); - ret = _omap2_clk_enable(clk); if (ret) { - if (clk->clkdm) - omap2_clkdm_clk_disable(clk->clkdm, clk); - if (clk->parent) omap2_clk_disable(clk->parent); @@ -442,6 +439,8 @@ int omap2_clk_enable(struct clk *clk) return ret; err: + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); clk->usecount--; return ret; } -- cgit v0.10.2 From 883992bd8f6924c9aa849f2dac381075e2e55a9d Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 28 Jan 2009 12:35:31 -0700 Subject: [ARM] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be disabled Clock rate change code executes inside a spinlock with hardirqs disabled. The only code that should be messing around with the hardirq state should be the plat-omap/clock.c code. In the omap2_reprogram_dpllcore() case, this probably just wastes cycles, but in the omap3_core_dpll_m2_set_rate() case, this is a nasty bug. linux-omap source commit is b9b6208dadb5e0d8b290900a3ffa911673ca97ed. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1a88597..069f3e1 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -380,10 +380,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) u32 bypass = 0; struct prcm_config tmpset; const struct dpll_data *dd; - unsigned long flags; - int ret = -EINVAL; - local_irq_save(flags); cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -395,7 +392,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) } else if (rate != cur_rate) { valid_rate = omap2_dpllcore_round_rate(rate); if (valid_rate != rate) - goto dpll_exit; + return -EINVAL; if (mult == 1) low = curr_prcm_set->dpll_speed; @@ -404,7 +401,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) dd = clk->dpll_data; if (!dd) - goto dpll_exit; + return -EINVAL; tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); tmpset.cm_clksel1_pll &= ~(dd->mult_mask | @@ -441,11 +438,8 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); omap2xxx_sdrc_reprogram(done_rate, 0); } - ret = 0; -dpll_exit: - local_irq_restore(flags); - return(ret); + return 0; } /** diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a853b1e..3b6e27b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -686,10 +686,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) WARN_ON(new_div != 1 && new_div != 2); /* REVISIT: Add SDRC_MR changing to this code also */ - local_irq_disable(); omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb, new_div); - local_irq_enable(); return 0; } -- cgit v0.10.2 From 93faee1d509926b844ad021e941a194e898f68dd Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Mon, 26 Jan 2009 17:24:51 +0100 Subject: [ARM] 5371/1: ep93xx: add i2c device to edb9307a Add the on-board rtc i2c device to the edb9307a platform init. The EP93xx based EDB9307A dev board has an on-board ISL1208 RTC connected to the I2C bus. Now that the core code supports the I2C bus, this patch will add support for the device. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c index 5b5c22b..6171167 100644 --- a/arch/arm/mach-ep93xx/edb9307a.c +++ b/arch/arm/mach-ep93xx/edb9307a.c @@ -48,12 +48,24 @@ static struct ep93xx_eth_data edb9307a_eth_data = { .phy_id = 1, }; +static struct i2c_board_info __initdata edb9307a_i2c_data[] = { + { + /* On-board battery backed RTC */ + I2C_BOARD_INFO("isl1208", 0x6f), + }, + /* + * The I2C signals are also routed to the Expansion Connector (J4) + */ +}; + static void __init edb9307a_init_machine(void) { ep93xx_init_devices(); platform_device_register(&edb9307a_flash); ep93xx_register_eth(&edb9307a_eth_data, 1); + + ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data)); } MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") -- cgit v0.10.2 From b74788d8c118a48585ad5342560e0aea6ed0ccd4 Mon Sep 17 00:00:00 2001 From: Daniel Silverstone Date: Thu, 29 Jan 2009 11:33:10 +0100 Subject: [ARM] 5372/1: ACS5K: Core board support for the ACS-5000 This patch provides the core board support for the Brivo Systems LLC ACS-5000 master board for automated door/card-reader etc management. Signed-off-by: Daniel Silverstone Signed-off-by: Vincent Sanders Signed-off-by: Russell King diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig new file mode 100644 index 0000000..1cab4e7 --- /dev/null +++ b/arch/arm/configs/acs5k_defconfig @@ -0,0 +1,1233 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-simtec-micrel1 +# Tue Dec 16 13:31:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +CONFIG_ARCH_KS8695=y +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Kendin/Micrel KS8695 Implementations +# +CONFIG_MACH_KS8695=y +CONFIG_MACH_DSM320=y +CONFIG_MACH_ACS5K=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +CONFIG_PCI_DEBUG=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_KS8695_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_PRISM54=m +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_KS8695=y +CONFIG_SERIAL_KS8695_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_ACS5KCAN=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_KS8695_WATCHDOG=y +# CONFIG_ALIM7101_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig new file mode 100644 index 0000000..8e3d084 --- /dev/null +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -0,0 +1,941 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-simtec-micrel1 +# Tue Jan 6 13:23:07 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +CONFIG_ARCH_KS8695=y +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Kendin/Micrel KS8695 Implementations +# +# CONFIG_MACH_KS8695 is not set +# CONFIG_MACH_DSM320 is not set +CONFIG_MACH_ACS5K=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_KS8695_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_KS8695=y +CONFIG_SERIAL_KS8695_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_ACS5KCAN=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_KS8695_WATCHDOG=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index 2754daa..fe0c82e 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -14,6 +14,12 @@ config MACH_DSM320 Say 'Y' here if you want your kernel to run on the D-Link DSM-320 Wireless Media Player. +config MACH_ACS5K + bool "Brivo Systems LLC, ACS-5000 Master board" + help + say 'Y' here if you want your kernel to run on the Brivo + Systems LLC, ACS-5000 Master board. + endmenu endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index f735d2c..7e3e816 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_LEDS) += leds.o # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o obj-$(CONFIG_MACH_DSM320) += board-dsm320.o +obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c new file mode 100644 index 0000000..9e3e5a6 --- /dev/null +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -0,0 +1,233 @@ +/* + * arch/arm/mach-ks8695/board-acs5k.c + * + * Brivo Systems LLC, ACS-5000 Master Board + * + * Copyright 2008 Simtec Electronics + * Daniel Silverstone + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include "generic.h" + +static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = { + .sda_pin = 4, + .scl_pin = 5, + .udelay = 10, +}; + +static struct platform_device acs5k_i2c_device = { + .name = "i2c-gpio", + .id = -1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = &acs5k_i2c_device_platdata, + }, +}; + +static int acs5k_pca9555_setup(struct i2c_client *client, + unsigned gpio_base, unsigned ngpio, + void *context) +{ + static int acs5k_gpio_value[] = { + -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1 + }; + int n; + + for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) { + gpio_request(gpio_base + n, "ACS-5000 GPIO Expander"); + if (acs5k_gpio_value[n] < 0) + gpio_direction_input(gpio_base + n); + else + gpio_direction_output(gpio_base + n, + acs5k_gpio_value[n]); + gpio_export(gpio_base + n, 0); /* Export, direction locked down */ + } + + return 0; +} + +static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = { + .gpio_base = 16, /* Start directly after the CPU's GPIO */ + .invert = 0, /* Do not invert */ + .setup = acs5k_pca9555_setup, +}; + +static struct i2c_board_info acs5k_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &acs5k_i2c_pca9555_platdata, + }, +}; + +static void __devinit acs5k_i2c_init(void) +{ + /* The gpio interface */ + platform_device_register(&acs5k_i2c_device); + /* I2C devices */ + i2c_register_board_info(0, acs5k_i2c_devs, + ARRAY_SIZE(acs5k_i2c_devs)); +} + +static struct mtd_partition acs5k_nor_partitions[] = { + [0] = { + .name = "Boot Agent and config", + .size = SZ_256K, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "Kernel", + .size = SZ_1M, + .offset = SZ_256K, + }, + [2] = { + .name = "SquashFS1", + .size = SZ_2M, + .offset = SZ_256K + SZ_1M, + }, + [3] = { + .name = "SquashFS2", + .size = SZ_4M + SZ_2M, + .offset = SZ_256K + SZ_1M + SZ_2M, + }, + [4] = { + .name = "Data", + .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */ + .offset = SZ_256K + SZ_8M + SZ_1M, + } +}; + +static struct physmap_flash_data acs5k_nor_pdata = { + .width = 4, + .nr_parts = ARRAY_SIZE(acs5k_nor_partitions), + .parts = acs5k_nor_partitions, +}; + +static struct resource acs5k_nor_resource[] = { + [0] = { + .start = SZ_32M, /* We expect the bootloader to map + * the flash here. + */ + .end = SZ_32M + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SZ_32M + SZ_16M, + .end = SZ_32M + SZ_32M - SZ_256K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device acs5k_device_nor = { + .name = "physmap-flash", + .id = -1, + .num_resources = ARRAY_SIZE(acs5k_nor_resource), + .resource = acs5k_nor_resource, + .dev = { + .platform_data = &acs5k_nor_pdata, + }, +}; + +static void __init acs5k_register_nor(void) +{ + int ret; + + if (acs5k_nor_partitions[0].mask_flags == 0) + printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n"); + + ret = platform_device_register(&acs5k_device_nor); + if (ret < 0) + printk(KERN_ERR "failed to register physmap-flash device\n"); +} + +static int __init acs5k_protection_setup(char *s) +{ + /* We can't allocate anything here but we should be able + * to trivially parse s and decide if we can protect the + * bootloader partition or not + */ + if (strcmp(s, "no") == 0) + acs5k_nor_partitions[0].mask_flags = 0; + + return 1; +} + +__setup("protect_bootloader=", acs5k_protection_setup); + +static void __init acs5k_init_gpio(void) +{ + int i; + + ks8695_register_gpios(); + for (i = 0; i < 4; ++i) + gpio_request(i, "ACS5K IRQ"); + gpio_request(7, "ACS5K KS_FRDY"); + for (i = 8; i < 16; ++i) + gpio_request(i, "ACS5K Unused"); + + gpio_request(3, "ACS5K CAN Control"); + gpio_request(6, "ACS5K Heartbeat"); + gpio_direction_output(3, 1); /* Default CAN_RESET high */ + gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */ + gpio_export(3, 0); /* export CAN_RESET as output only */ + gpio_export(6, 0); /* export KS8695_ACTIVE as output only */ +} + +static void __init acs5k_init(void) +{ + acs5k_init_gpio(); + + /* Network device */ + ks8695_add_device_lan(); /* eth0 = LAN */ + ks8695_add_device_wan(); /* ethX = WAN */ + + /* NOR devices */ + acs5k_register_nor(); + + /* I2C bus */ + acs5k_i2c_init(); +} + +MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") + /* Maintainer: Simtec Electronics. */ + .phys_io = KS8695_IO_PA, + .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc, + .boot_params = KS8695_SDRAM_PA + 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = acs5k_init, + .timer = &ks8695_timer, +MACHINE_END -- cgit v0.10.2 From 17198f2d681d34b3376f3a55b2837e56062c2439 Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Wed, 4 Feb 2009 05:01:38 +0100 Subject: [ARM] 5374/1: The w90p910 uart0 driver patch Add W90P910 UART0 support,the W90P910 UART0 is 8250 series. Signed-off-by: Wan ZongShun Signed-off-by: Russell King diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index 40ff408..001d509 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -43,6 +43,7 @@ extern void w90p910_init_io(struct map_desc *mach_desc, int size); extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no); extern void w90p910_init_clocks(int xtal); extern void w90p910_map_io(struct map_desc *mach_desc, int size); +extern struct platform_device w90p910_serial_device; extern struct sys_timer w90x900_timer; #define W90X900_RES(name) \ @@ -67,11 +68,13 @@ struct platform_device w90x900_##devname = { \ .resource = w90x900_##regname##_resource, \ } -#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \ -{ \ - .hwport = port, \ - .flags = flag, \ - .ucon = uc, \ - .ulcon = ulc, \ - .ufcon = ufc, \ +#define W90X900_8250PORT(name) \ +{ \ + .membase = name##_BA, \ + .mapbase = name##_PA, \ + .irq = IRQ_##name, \ + .uartclk = 11313600, \ + .regshift = 2, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ } diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c index 9ebc93f..5425270 100644 --- a/arch/arm/mach-w90x900/mach-w90p910evb.c +++ b/arch/arm/mach-w90x900/mach-w90p910evb.c @@ -36,24 +36,16 @@ static struct map_desc w90p910_iodesc[] __initdata = { }; -static struct w90x900_uartcfg w90p910_uartcfgs[] = { - W90X900_UARTCFG(0, 0, 0, 0, 0), - W90X900_UARTCFG(1, 0, 0, 0, 0), - W90X900_UARTCFG(2, 0, 0, 0, 0), - W90X900_UARTCFG(3, 0, 0, 0, 0), - W90X900_UARTCFG(4, 0, 0, 0, 0), -}; - /*Here should be your evb resourse,such as LCD*/ static struct platform_device *w90p910evb_dev[] __initdata = { + &w90p910_serial_device, }; static void __init w90p910evb_map_io(void) { w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc)); w90p910_init_clocks(0); - w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs)); } static void __init w90p910evb_init(void) diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c index aa783bc..2bcbaa6 100644 --- a/arch/arm/mach-w90x900/w90p910.c +++ b/arch/arm/mach-w90x900/w90p910.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -36,12 +37,6 @@ #include "cpu.h" -/*W90P910 has five uarts*/ - -#define MAX_UART_COUNT 5 -static int uart_count; -static struct platform_device *uart_devs[MAX_UART_COUNT-1]; - /* Initial IO mappings */ static struct map_desc w90p910_iodesc[] __initdata = { @@ -53,48 +48,19 @@ static struct map_desc w90p910_iodesc[] __initdata = { /*IODESC_ENT(LCD),*/ }; -/*Init the dev resource*/ - -static W90X900_RES(UART0); -static W90X900_RES(UART1); -static W90X900_RES(UART2); -static W90X900_RES(UART3); -static W90X900_RES(UART4); -static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart"); -static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart"); -static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart"); -static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart"); -static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart"); - -static struct platform_device *uart_devices[] __initdata = { - &w90x900_uart0, - &w90x900_uart1, - &w90x900_uart2, - &w90x900_uart3, - &w90x900_uart4 -}; +/* Initial serial platform data */ -/*Init W90P910 uart device*/ +struct plat_serial8250_port w90p910_uart_data[] = { + W90X900_8250PORT(UART0), +}; -void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no) -{ - struct platform_device *platdev; - int uart, uartdev; - - /*By min() to judge count of uart be used indeed*/ - - uartdev = ARRAY_SIZE(uart_devices); - no = min(uartdev, no); - - for (uart = 0; uart < no; uart++, cfg++) { - if (cfg->hwport != uart) - printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart); - platdev = uart_devices[cfg->hwport]; - uart_devs[uart] = platdev; - platdev->dev.platform_data = cfg; - } - uart_count = uart; -} +struct platform_device w90p910_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = w90p910_uart_data, + }, +}; /*Init W90P910 evb io*/ @@ -122,13 +88,6 @@ static int __init w90p910_init_cpu(void) static int __init w90x900_arch_init(void) { - int ret; - - ret = w90p910_init_cpu(); - if (ret != 0) - return ret; - - return platform_add_devices(uart_devs, uart_count); - + return w90p910_init_cpu(); } arch_initcall(w90x900_arch_init); -- cgit v0.10.2 From b4e411294a193e18c41912bc3df03f5b9cd7c823 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Wed, 4 Feb 2009 16:47:38 +0100 Subject: [ARM] 5375/1: PATCH - update jornada720.c to reflect driver additions This patch updates the list of devices activated at init to also include the keyboard and touchscreen structs. We also remove a non-needed #ifdef. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 81848aa..fd776bb 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -226,12 +226,22 @@ static struct platform_device jornada_ssp_device = { .id = -1, }; +static struct platform_device jornada_kbd_device = { + .name = "jornada720_kbd", + .id = -1, +}; + +static struct platform_device jornada_ts_device = { + .name = "jornada_ts", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, -#ifdef CONFIG_SA1100_JORNADA720_SSP &jornada_ssp_device, -#endif &s1d13xxxfb_device, + &jornada_kbd_device, + &jornada_ts_device, }; static int __init jornada720_init(void) -- cgit v0.10.2 From 0d4ff4df341208b1b75e01feca27301c0dcbf490 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Thu, 1 Jan 2009 17:49:19 +0100 Subject: [ARM] 5353/1: fbdev: add E-Ink Broadsheet controller support v3 This patch adds support for the E-Ink Broadsheet display controller. Cc: Eric Miao Signed-off-by: Jaya Kumar Signed-off-by: Russell King diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index f026770..5aa099b 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2135,6 +2135,20 @@ config FB_MX3 far only synchronous displays are supported. If you plan to use an LCD display with your i.MX31 system, say Y here. +config FB_BROADSHEET + tristate "E-Ink Broadsheet/Epson S1D13521 controller support" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This driver implements support for the E-Ink Broadsheet + controller. The release name for this device was Epson S1D13521 + and could also have been called by other names when coupled with + a bridge adapter. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2a998ca..edd5a85 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o obj-$(CONFIG_FB_MAXINE) += maxinefb.o obj-$(CONFIG_FB_METRONOME) += metronomefb.o +obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c new file mode 100644 index 0000000..509cb92 --- /dev/null +++ b/drivers/video/broadsheetfb.c @@ -0,0 +1,568 @@ +/* + * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This driver is written to be used with the Broadsheet display controller. + * + * It is intended to be architecture independent. A board specific driver + * must be used to perform all the physical IO interactions. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include