From 2f2fa13d5665d7d5f2ba6068dd28ca7796fa9ea8 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Mon, 12 May 2008 22:21:07 -0700 Subject: [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports. For Vports, the port_type should be set to FC_PORTTYPE_NPIV. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 2876908..2caf841 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -886,9 +886,13 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) static void qla2x00_get_host_port_type(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); + scsi_qla_host_t *ha = shost_priv(shost); uint32_t port_type = FC_PORTTYPE_UNKNOWN; + if (ha->parent) { + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + return; + } switch (ha->current_topology) { case ISP_CFG_NL: port_type = FC_PORTTYPE_LPORT; -- cgit v0.10.2 From fd9a29f03600f306acb4faf49b92ca5472f39ee8 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:08 -0700 Subject: [SCSI] qla2xxx: Display driver version at module init-time. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 3223fd1..dd1e117 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2864,7 +2864,8 @@ qla2x00_module_init(void) return -ENODEV; } - printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); + printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n", + qla2x00_version_str); ret = pci_register_driver(&qla2xxx_pci_driver); if (ret) { kmem_cache_destroy(srb_cachep); -- cgit v0.10.2 From 0e973a24f02ed8c627271b013d69683b4497828d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:09 -0700 Subject: [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers. Both MSI-X vector handlers attempt to acquire the HA's hardware_lock. This though requires that interrupts be disabled/enabled during acquisition and release of the spinlock. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5d9a64a..0793aa9 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1639,12 +1639,12 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) ha = dev_id; reg = &ha->iobase->isp24; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); qla24xx_process_response_queue(ha); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; } @@ -1663,7 +1663,7 @@ qla24xx_msix_default(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { @@ -1716,7 +1716,7 @@ qla24xx_msix_default(int irq, void *dev_id) } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { -- cgit v0.10.2 From e1e82b6f0df0c5175ddd3d4f8862507aa71da8e9 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Mon, 12 May 2008 22:21:10 -0700 Subject: [SCSI] qla2xxx: firmware semaphore to mutex Signed-off-by: Daniel Walker Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index dd1e117..9982ecd 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -2634,7 +2635,7 @@ qla2x00_timer(scsi_qla_host_t *ha) #define FW_FILE_ISP24XX "ql2400_fw.bin" #define FW_FILE_ISP25XX "ql2500_fw.bin" -static DECLARE_MUTEX(qla_fw_lock); +static DEFINE_MUTEX(qla_fw_lock); static struct fw_blob qla_fw_blobs[FW_BLOBS] = { { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, }, @@ -2665,7 +2666,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) blob = &qla_fw_blobs[FW_ISP25XX]; } - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); if (blob->fw) goto out; @@ -2678,7 +2679,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) } out: - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); return blob; } @@ -2687,11 +2688,11 @@ qla2x00_release_firmware(void) { int idx; - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); for (idx = 0; idx < FW_BLOBS; idx++) if (qla_fw_blobs[idx].fw) release_firmware(qla_fw_blobs[idx].fw); - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); } static pci_ers_result_t -- cgit v0.10.2 From 6c2f527cb84cbd7d2d8a668c979e70bf78980ccc Mon Sep 17 00:00:00 2001 From: "matthias@kaehlcke.net" Date: Mon, 12 May 2008 22:21:11 -0700 Subject: [SCSI] qla2xxx: Convert vport_sem to a mutex The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 2caf841..48318d0 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1176,10 +1176,10 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) qla24xx_disable_vp(vha); qla24xx_deallocate_vp_id(vha); - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ha->cur_vport_count--; clear_bit(vha->vp_idx, ha->vp_idx_map); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); kfree(vha->node_name); kfree(vha->port_name); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 299eccf..8dd60001 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2457,7 +2457,7 @@ typedef struct scsi_qla_host { #define MBX_INTR_WAIT 2 #define MBX_UPDATE_FLASH_ACTIVE 3 - struct semaphore vport_sem; /* Virtual port synchronization */ + struct mutex vport_lock; /* Virtual port synchronization */ struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 2100604..3800876 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2807,9 +2807,9 @@ qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) */ map = (vp_index - 1) / 8; pos = (vp_index - 1) & 7; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vce->vp_idx_map[map] |= 1 << pos; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0); if (rval != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f2b0497..fc55429 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -32,12 +32,12 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) scsi_qla_host_t *ha = vha->parent; /* Find an empty slot and assign an vp_id */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1); if (vp_id > ha->max_npiv_vports) { DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n", vp_id, ha->max_npiv_vports)); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -45,7 +45,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) ha->num_vhosts++; vha->vp_idx = vp_id; list_add_tail(&vha->vp_list, &ha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -55,12 +55,12 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) uint16_t vp_id; scsi_qla_host_t *ha = vha->parent; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = vha->vp_idx; ha->num_vhosts--; clear_bit(vp_id, ha->vp_idx_map); list_del(&vha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); } static scsi_qla_host_t * @@ -145,9 +145,9 @@ qla24xx_enable_vp(scsi_qla_host_t *vha) } /* Initialize the new vport unless it is a persistent port */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ret = qla24xx_modify_vp_config(vha); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); if (ret != QLA_SUCCESS) { fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED); @@ -437,10 +437,10 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) vha->flags.init_done = 1; num_hosts++; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); set_bit(vha->vp_idx, ha->vp_idx_map); ha->cur_vport_count++; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vha; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9982ecd..817f62f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1632,7 +1632,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* load the F/W, read paramaters, and init the H/W */ ha->instance = num_hosts; - init_MUTEX(&ha->vport_sem); + mutex_init(&ha->vport_lock); init_completion(&ha->mbx_cmd_comp); complete(&ha->mbx_cmd_comp); init_completion(&ha->mbx_intr_comp); -- cgit v0.10.2 From fa0926df0f5cf63b998a79127519bdcfe9bf05f7 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:12 -0700 Subject: [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing. Recent firmwares no longer return the 'number of buffers' in mailbox6. The original code may result in a potential panic during a FW-dump process due to the driver misinterpreting the size of the allocated buffer. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3800876..bf3a6f0 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2508,7 +2508,7 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma, if (mb) memcpy(mb, mcp->mb, 8 * sizeof(*mb)); if (dwords) - *dwords = mcp->mb[6]; + *dwords = buffers; } return rval; -- cgit v0.10.2 From 68af081151670af4ca405823f9dfb74ec6b20e66 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:13 -0700 Subject: [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump. The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 48318d0..8dd88fc 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -70,6 +70,9 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, case 2: qla2x00_alloc_fw_dump(ha); break; + case 3: + qla2x00_system_error(ha); + break; } return (count); } diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f882706..9b4bebe 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -228,6 +228,9 @@ extern int qla24xx_abort_target(struct fc_port *, unsigned int); extern int qla24xx_lun_reset(struct fc_port *, unsigned int); extern int +qla2x00_system_error(scsi_qla_host_t *); + +extern int qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t); extern int diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bf3a6f0..250d2f6 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2303,8 +2303,6 @@ qla24xx_lun_reset(struct fc_port *fcport, unsigned int l) return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l); } -#if 0 - int qla2x00_system_error(scsi_qla_host_t *ha) { @@ -2312,7 +2310,7 @@ qla2x00_system_error(scsi_qla_host_t *ha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_FWI2_CAPABLE(ha)) + if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha)) return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); @@ -2334,8 +2332,6 @@ qla2x00_system_error(scsi_qla_host_t *ha) return rval; } -#endif /* 0 */ - /** * qla2x00_set_serdes_params() - * @ha: HA context -- cgit v0.10.2 From d2ba5675d8993e669182250e41ad83e7a0b5d4ad Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:14 -0700 Subject: [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > []__lock_acquire+0x459/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []trace_hardirqs_on+0xe7/0x10e > []qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > []print_usage_bug+0x100/0x10a > []mark_lock+0xaa/0x395 > []__lock_acquire+0x3f2/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []handle_IRQ_event+0x13/0x3d > []handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index e9bae27..92fafbd 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -34,7 +34,11 @@ qla2x00_debounce_register(volatile uint16_t __iomem *addr) static inline void qla2x00_poll(scsi_qla_host_t *ha) { + unsigned long flags; + + local_irq_save(flags); ha->isp_ops->intr_handler(0, ha); + local_irq_restore(flags); } static __inline__ scsi_qla_host_t * -- cgit v0.10.2 From a7cd02320eeee9992c7eba347555e8970042b68c Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:15 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling." This reverts commit 8084fe168a5252548cdddf2ed181c337fecd0523. The midlayer should be given the oppotunity to interpret the check-condition and based on scsi_cmnd->resid determine if a transfer should be retried or failed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0793aa9..14bcd7c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1132,25 +1132,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; qla2x00_handle_sense(sp, sense_data, sense_len); - - /* - * In case of a Underrun condition, set both the lscsi - * status and the completion status to appropriate - * values. - */ - if (resid && - ((unsigned)(scsi_bufflen(cp) - resid) < - cp->underflow)) { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", ha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, resid, - scsi_bufflen(cp))); - - cp->result = DID_ERROR << 16 | lscsi_status; - } } else { /* * If RISC reports underrun and target does not report -- cgit v0.10.2 From 7853099a70742b2a3c753282e5ccfbdda86cb29f Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:16 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k3. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index afeae2b..b42e3f2 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k2" +#define QLA2XXX_VERSION "8.02.01-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v0.10.2 From aaa9bbe039febf1d3a0f3a374deea0680d9f5758 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 17:38:32 +0000 Subject: [CIFS] remove unused variables CC: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 0891405..9cfcf32 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -333,7 +333,6 @@ struct cifsFileInfo { bool messageMode:1; /* for pipes: message vs byte mode */ atomic_t wrtPending; /* handle in use - defer close */ struct semaphore fh_sem; /* prevents reopen race after dead ses*/ - char *search_resume_name; /* BB removeme BB */ struct cifs_search_info srch_inf; }; @@ -626,7 +625,7 @@ GLOBAL_EXTERN atomic_t tcpSesAllocCount; GLOBAL_EXTERN atomic_t tcpSesReconnectCount; GLOBAL_EXTERN atomic_t tconInfoReconnectCount; -/* Various Debug counters to remove someday (BB) */ +/* Various Debug counters */ GLOBAL_EXTERN atomic_t bufAllocCount; /* current number allocated */ #ifdef CONFIG_CIFS_STATS2 GLOBAL_EXTERN atomic_t totBufAllocCount; /* total allocated over all time */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9b8b4cf..174bf8a 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1728,7 +1728,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, { int rc = 0; LOCK_REQ *pSMB = NULL; - LOCK_RSP *pSMBr = NULL; +/* LOCK_RSP *pSMBr = NULL; */ /* No response data other than rc to parse */ int bytes_returned; int timeout = 0; __u16 count; @@ -1739,8 +1739,6 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, if (rc) return rc; - pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */ - if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) { timeout = CIFS_ASYNC_OP; /* no response expected */ pSMB->Timeout = 0; @@ -1774,7 +1772,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, if (waitFlag) { rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB, - (struct smb_hdr *) pSMBr, &bytes_returned); + (struct smb_hdr *) pSMB, &bytes_returned); cifs_small_buf_release(pSMB); } else { rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB, diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 8636cec..0aac824 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -546,7 +546,6 @@ int cifs_close(struct inode *inode, struct file *file) msleep(timeout); timeout *= 8; } - kfree(pSMBFile->search_resume_name); kfree(file->private_data); file->private_data = NULL; } else @@ -605,12 +604,6 @@ int cifs_closedir(struct inode *inode, struct file *file) else cifs_buf_release(ptmp); } - ptmp = pCFileStruct->search_resume_name; - if (ptmp) { - cFYI(1, ("closedir free resume name")); - pCFileStruct->search_resume_name = NULL; - kfree(ptmp); - } kfree(file->private_data); file->private_data = NULL; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 1d69b80..4b17f8f 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -519,8 +519,7 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) pnotify = (struct file_notify_information *) ((char *)&pSMBr->hdr.Protocol + data_offset); cFYI(1, ("dnotify on %s Action: 0x%x", - pnotify->FileName, - pnotify->Action)); /* BB removeme BB */ + pnotify->FileName, pnotify->Action)); /* cifs_dump_mem("Rcvd notify Data: ",buf, sizeof(struct smb_hdr)+60); */ return true; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 713c251..df2c3c4 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -675,8 +675,6 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, cifsFile->invalidHandle = true; CIFSFindClose(xid, pTcon, cifsFile->netfid); } - kfree(cifsFile->search_resume_name); - cifsFile->search_resume_name = NULL; if (cifsFile->srch_inf.ntwrk_buf_start) { cFYI(1, ("freeing SMB ff cache buf on search rewind")); if (cifsFile->srch_inf.smallBuf) @@ -1043,9 +1041,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) } /* else { cifsFile->invalidHandle = true; CIFSFindClose(xid, pTcon, cifsFile->netfid); - } - kfree(cifsFile->search_resume_name); - cifsFile->search_resume_name = NULL; */ + } */ rc = find_cifs_entry(xid, pTcon, file, ¤t_entry, &num_to_fill); -- cgit v0.10.2 From 4468eb3fd102cad559e51594a01cbc65b994d264 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:31:40 -0400 Subject: on non-posix shares, clear write bits in mode when ATTR_READONLY is set When mounting a share with posix extensions disabled, cifs_get_inode_info turns off all the write bits in the mode for regular files if ATTR_READONLY is set. Directories and other inode types, however, can also have ATTR_READONLY set, but the mode gives no indication of this. This patch makes this apply to other inode types besides regular files. It also cleans up how modes are set in cifs_get_inode_info for both the "normal" and "dynperm" cases. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 129dbfe..ae5bcaf2 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -418,6 +418,7 @@ int cifs_get_inode_info(struct inode **pinode, char *buf = NULL; bool adjustTZ = false; bool is_dfs_referral = false; + umode_t default_mode; pTcon = cifs_sb->tcon; cFYI(1, ("Getting info on %s", full_path)); @@ -530,47 +531,42 @@ int cifs_get_inode_info(struct inode **pinode, inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj; } - /* set default mode. will override for dirs below */ - if (atomic_read(&cifsInfo->inUse) == 0) - /* new inode, can safely set these fields */ - inode->i_mode = cifs_sb->mnt_file_mode; - else /* since we set the inode type below we need to mask off - to avoid strange results if type changes and both - get orred in */ - inode->i_mode &= ~S_IFMT; -/* if (attr & ATTR_REPARSE) */ - /* We no longer handle these as symlinks because we could not - follow them due to the absolute path with drive letter */ - if (attr & ATTR_DIRECTORY) { - /* override default perms since we do not do byte range locking - on dirs */ - inode->i_mode = cifs_sb->mnt_dir_mode; - inode->i_mode |= S_IFDIR; - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (cifsInfo->cifsAttrs & ATTR_SYSTEM) && - /* No need to le64 convert size of zero */ - (pfindData->EndOfFile == 0)) { - inode->i_mode = cifs_sb->mnt_file_mode; - inode->i_mode |= S_IFIFO; -/* BB Finish for SFU style symlinks and devices */ - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (cifsInfo->cifsAttrs & ATTR_SYSTEM)) { - if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile), - full_path, cifs_sb, xid)) - cFYI(1, ("Unrecognized sfu inode type")); - - cFYI(1, ("sfu mode 0%o", inode->i_mode)); + /* get default inode mode */ + if (attr & ATTR_DIRECTORY) + default_mode = cifs_sb->mnt_dir_mode; + else + default_mode = cifs_sb->mnt_file_mode; + + /* set permission bits */ + if (atomic_read(&cifsInfo->inUse) == 0 || + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + inode->i_mode = default_mode; + else { + /* just reenable write bits if !ATTR_READONLY */ + if ((inode->i_mode & S_IWUGO) == 0 && + (attr & ATTR_READONLY) == 0) + inode->i_mode |= (S_IWUGO & default_mode); + inode->i_mode &= ~S_IFMT; + } + /* clear write bits if ATTR_READONLY is set */ + if (attr & ATTR_READONLY) + inode->i_mode &= ~S_IWUGO; + + /* set inode type */ + if ((attr & ATTR_SYSTEM) && + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) { + /* no need to fix endianness on 0 */ + if (pfindData->EndOfFile == 0) + inode->i_mode |= S_IFIFO; + else if (decode_sfu_inode(inode, + le64_to_cpu(pfindData->EndOfFile), + full_path, cifs_sb, xid)) + cFYI(1, ("unknown SFU file type\n")); } else { - inode->i_mode |= S_IFREG; - /* treat dos attribute of read-only as read-only mode eg 555 */ - if (cifsInfo->cifsAttrs & ATTR_READONLY) - inode->i_mode &= ~(S_IWUGO); - else if ((inode->i_mode & S_IWUGO) == 0) - /* the ATTR_READONLY flag may have been */ - /* changed on server -- set any w bits */ - /* allowed by mnt_file_mode */ - inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode); - /* BB add code to validate if device or weird share or device type? */ + if (attr & ATTR_DIRECTORY) + inode->i_mode |= S_IFDIR; + else + inode->i_mode |= S_IFREG; } spin_lock(&inode->i_lock); diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index df2c3c4..83f3069 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -132,6 +132,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, __u32 attr; __u64 allocation_size; __u64 end_of_file; + umode_t default_mode; /* save mtime and size */ local_mtime = tmp_inode->i_mtime; @@ -187,48 +188,54 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, if (atomic_read(&cifsInfo->inUse) == 0) { tmp_inode->i_uid = cifs_sb->mnt_uid; tmp_inode->i_gid = cifs_sb->mnt_gid; - /* set default mode. will override for dirs below */ - tmp_inode->i_mode = cifs_sb->mnt_file_mode; - } else { - /* mask off the type bits since it gets set - below and we do not want to get two type - bits set */ + } + + if (attr & ATTR_DIRECTORY) + default_mode = cifs_sb->mnt_dir_mode; + else + default_mode = cifs_sb->mnt_file_mode; + + /* set initial permissions */ + if ((atomic_read(&cifsInfo->inUse) == 0) || + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + tmp_inode->i_mode = default_mode; + else { + /* just reenable write bits if !ATTR_READONLY */ + if ((tmp_inode->i_mode & S_IWUGO) == 0 && + (attr & ATTR_READONLY) == 0) + tmp_inode->i_mode |= (S_IWUGO & default_mode); + tmp_inode->i_mode &= ~S_IFMT; } - if (attr & ATTR_DIRECTORY) { - *pobject_type = DT_DIR; - /* override default perms since we do not lock dirs */ - if (atomic_read(&cifsInfo->inUse) == 0) - tmp_inode->i_mode = cifs_sb->mnt_dir_mode; - tmp_inode->i_mode |= S_IFDIR; - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (attr & ATTR_SYSTEM)) { + /* clear write bits if ATTR_READONLY is set */ + if (attr & ATTR_READONLY) + tmp_inode->i_mode &= ~S_IWUGO; + + /* set inode type */ + if ((attr & ATTR_SYSTEM) && + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) { if (end_of_file == 0) { - *pobject_type = DT_FIFO; tmp_inode->i_mode |= S_IFIFO; + *pobject_type = DT_FIFO; } else { - /* rather than get the type here, we mark the - inode as needing revalidate and get the real type - (blk vs chr vs. symlink) later ie in lookup */ - *pobject_type = DT_REG; + /* + * trying to get the type can be slow, so just call + * this a regular file for now, and mark for reval + */ tmp_inode->i_mode |= S_IFREG; + *pobject_type = DT_REG; cifsInfo->time = 0; } -/* we no longer mark these because we could not follow them */ -/* } else if (attr & ATTR_REPARSE) { - *pobject_type = DT_LNK; - tmp_inode->i_mode |= S_IFLNK; */ } else { - *pobject_type = DT_REG; - tmp_inode->i_mode |= S_IFREG; - if (attr & ATTR_READONLY) - tmp_inode->i_mode &= ~(S_IWUGO); - else if ((tmp_inode->i_mode & S_IWUGO) == 0) - /* the ATTR_READONLY flag may have been changed on */ - /* server -- set any w bits allowed by mnt_file_mode */ - tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode); - } /* could add code here - to validate if device or weird share type? */ + if (attr & ATTR_DIRECTORY) { + tmp_inode->i_mode |= S_IFDIR; + *pobject_type = DT_DIR; + } else { + tmp_inode->i_mode |= S_IFREG; + *pobject_type = DT_REG; + } + } /* can not fill in nlink here as in qpathinfo version and Unx search */ if (atomic_read(&cifsInfo->inUse) == 0) -- cgit v0.10.2 From b0fd30d3e7e768aad5e398caaea6ae5a5c814eab Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: when creating new inodes, use file_mode/dir_mode exclusively on mount without unix extensions When CIFS creates a new inode on a mount without unix extensions, it temporarily assigns the mode that was passed to it in the create/mkdir call. Eventually, when the inode is revalidated, it changes to have the file_mode or dir_mode for the mount. This is confusing to users who expect that the mode shouldn't change this way. It's also problematic since only the mode is treated this way, not the uid or gid. Suppose you have a CIFS mount that's mounted with: uid=0,gid=0,file_mode=0666,dir_mode=0777 ...if an unprivileged user comes along and does this on the mount: mkdir -m 0700 foo touch foo/bar ...there is a period of time where the touch will fail, since the dir will initially be owned by root and have mode 0700. If the user waits long enough, then "foo" will be revalidated and will get the correct dir_mode permissions. This patch changes cifs_mkdir and cifs_create to not overwrite the mode found by the initial cifs_get_inode_info call after the inode is created on the server. Legacy behavior can be reenabled with the new "dynperm" mount option. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index f0b5b5f..fb69c1f 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -260,7 +260,9 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, buf, inode->i_sb, xid, &fileHandle); if (newinode) { - newinode->i_mode = mode; + if (cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_DYNPERM) + newinode->i_mode = mode; if ((oplock & CIFS_CREATE_ACTION) && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ae5bcaf2..12667d6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1015,8 +1015,11 @@ mkdir_get_info: CIFS_MOUNT_MAP_SPECIAL_CHR); } if (direntry->d_inode) { - direntry->d_inode->i_mode = mode; - direntry->d_inode->i_mode |= S_IFDIR; + if (cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_DYNPERM) + direntry->d_inode->i_mode = + (mode | S_IFDIR); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = -- cgit v0.10.2 From 4e94a105ed0df78e25b20ff8ed6761f5937662b1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 18:22:46 +0000 Subject: [CIFS] remove trailing whitespace Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 12667d6..ae6b725 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1019,7 +1019,7 @@ mkdir_get_info: CIFS_MOUNT_DYNPERM) direntry->d_inode->i_mode = (mode | S_IFDIR); - + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = -- cgit v0.10.2 From 4ca691a892e8ab4f79583de1394f17a7dcfa2b57 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: silently ignore ownership changes unless unix extensions are enabled or we're faking uid changes CIFS currently allows you to change the ownership of a file, but unless unix extensions are enabled this change is not passed off to the server. Have CIFS silently ignore ownership changes that can't be persistently stored on the server unless the "setuids" option is explicitly specified. We could return an error here (-EOPNOTSUPP or something), but this is how most disk-based windows filesystems on behave on Linux (e.g. VFAT, NTFS, etc). With cifsacl support and proper Windows to Unix idmapping support, we may be able to do this more properly in the future. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ae6b725..fe752fd 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1546,13 +1546,26 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } else goto cifs_setattr_exit; } - if (attrs->ia_valid & ATTR_UID) { - cFYI(1, ("UID changed to %d", attrs->ia_uid)); - uid = attrs->ia_uid; - } - if (attrs->ia_valid & ATTR_GID) { - cFYI(1, ("GID changed to %d", attrs->ia_gid)); - gid = attrs->ia_gid; + + /* + * Without unix extensions we can't send ownership changes to the + * server, so silently ignore them. This is consistent with how + * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With + * CIFSACL support + proper Windows to Unix idmapping, we may be + * able to support this in the future. + */ + if (!pTcon->unix_ext && + !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { + attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); + } else { + if (attrs->ia_valid & ATTR_UID) { + cFYI(1, ("UID changed to %d", attrs->ia_uid)); + uid = attrs->ia_uid; + } + if (attrs->ia_valid & ATTR_GID) { + cFYI(1, ("GID changed to %d", attrs->ia_gid)); + gid = attrs->ia_gid; + } } time_buf.Attributes = 0; -- cgit v0.10.2 From 27adb44c4f671d15932eb0702a09d27244a8a7c1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 19:43:29 +0000 Subject: [CIFS] warn if both dynperm and cifsacl mount options specified Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 023434f..d49e274 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2120,6 +2120,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; } + if ((volume_info.cifs_acl) && (volume_info.dynperm)) + cERROR(1, ("mount option dynperm ignored if cifsacl " + "mount option supported")); + tcon = find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, volume_info.username); -- cgit v0.10.2 From b7206153f61bb63ee2cffa63905b57ec01d20e6e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 20:35:07 +0000 Subject: [CIFS] Correct incorrect obscure open flag Also add defines for pipe subcommand codes Signed-off-by: Steve French diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 65d58b4..0f327c2 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -79,6 +79,19 @@ #define TRANS2_GET_DFS_REFERRAL 0x10 #define TRANS2_REPORT_DFS_INCOSISTENCY 0x11 +/* SMB Transact (Named Pipe) subcommand codes */ +#define TRANS_SET_NMPIPE_STATE 0x0001 +#define TRANS_RAW_READ_NMPIPE 0x0011 +#define TRANS_QUERY_NMPIPE_STATE 0x0021 +#define TRANS_QUERY_NMPIPE_INFO 0x0022 +#define TRANS_PEEK_NMPIPE 0x0023 +#define TRANS_TRANSACT_NMPIPE 0x0026 +#define TRANS_RAW_WRITE_NMPIPE 0x0031 +#define TRANS_READ_NMPIPE 0x0036 +#define TRANS_WRITE_NMPIPE 0x0037 +#define TRANS_WAIT_NMPIPE 0x0053 +#define TRANS_CALL_NMPIPE 0x0054 + /* NT Transact subcommand codes */ #define NT_TRANSACT_CREATE 0x01 #define NT_TRANSACT_IOCTL 0x02 @@ -328,12 +341,13 @@ #define CREATE_COMPLETE_IF_OPLK 0x00000100 /* should be zero */ #define CREATE_NO_EA_KNOWLEDGE 0x00000200 #define CREATE_EIGHT_DOT_THREE 0x00000400 /* doc says this is obsolete - open for recovery flag - should - be zero */ + "open for recovery" flag - should + be zero in any case */ +#define CREATE_OPEN_FOR_RECOVERY 0x00000400 #define CREATE_RANDOM_ACCESS 0x00000800 #define CREATE_DELETE_ON_CLOSE 0x00001000 #define CREATE_OPEN_BY_ID 0x00002000 -#define CREATE_OPEN_BACKUP_INTN 0x00004000 +#define CREATE_OPEN_BACKUP_INTENT 0x00004000 #define CREATE_NO_COMPRESSION 0x00008000 #define CREATE_RESERVE_OPFILTER 0x00100000 /* should be zero */ #define OPEN_REPARSE_POINT 0x00200000 @@ -722,7 +736,6 @@ typedef struct smb_com_tconx_rsp_ext { #define SMB_CSC_CACHE_AUTO_REINT 0x0004 #define SMB_CSC_CACHE_VDO 0x0008 #define SMB_CSC_NO_CACHING 0x000C - #define SMB_UNIQUE_FILE_NAME 0x0010 #define SMB_EXTENDED_SIGNATURES 0x0020 @@ -806,7 +819,7 @@ typedef struct smb_com_findclose_req { #define ICOUNT_MASK 0x00FF #define PIPE_READ_MODE 0x0100 #define NAMED_PIPE_TYPE 0x0400 -#define PIPE_END_POINT 0x0800 +#define PIPE_END_POINT 0x4000 #define BLOCKING_NAMED_PIPE 0x8000 typedef struct smb_com_open_req { /* also handles create */ -- cgit v0.10.2 From 1f42ea7bc0ddfadebd9e1c5362b41b53902dbcb1 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 22 May 2008 12:34:41 +0100 Subject: [SCSI] fix intermittent oops in scsi_bus_uevent Reported-by: Sitsofe Wheeler > BUG: unable to handle kernel paging request at e6f17fac > IP: [] scsi_bus_uevent+0x1/0x17 > *pde = 2714b163 *pte = 26f17160 > Oops: 0000 [#1] DEBUG_PAGEALLOC > last sysfs file: > > Pid: 1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30) > EIP: 0060:[] EFLAGS: 00010282 CPU: 0 > EIP is at scsi_bus_uevent+0x1/0x17 > EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000 > ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90 > DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 The problem is caused by: commit b0ed43360fdca227048d88a08290365cb681c1a8 Author: Hannes Reinecke Date: Tue Mar 18 14:32:28 2008 +0100 [SCSI] add scsi_host and scsi_target to scsi_bus which added scsi_bus_type to the struct scsi_target device. This causes both the scsi_device and scsi_target to fire scsi_bus_uevents. However, the actualy scsi_bus_uevent() call assumes blindly that it's a struct scsi_device. Check for this and return immediately if it isn't. Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 049103f..93d2b67 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -359,7 +359,12 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv) static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; + + if (dev->type != &scsi_dev_type) + return 0; + + sdev = to_scsi_device(dev); add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type); return 0; -- cgit v0.10.2 From 5132861a7a44498ebb18357473f8b8d4cdc70e9f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: disable most mode changes on non-unix/non-cifsacl mounts CIFS currently allows you to change the mode of an inode on a share that doesn't have unix extensions enabled, and isn't using cifsacl. The inode in this case *only* has its mode changed in memory on the client. This is problematic since it can change any time the inode is purged from the cache. This patch makes cifs_setattr silently ignore most mode changes when unix extensions and cifsacl support are not enabled, and when the share is not mounted with the "dynperm" option. The exceptions are: When a mode change would remove all write access to an inode we turn on the ATTR_READONLY bit on the server and remove all write bits from the inode's mode in memory. When a mode change would add a write bit to an inode that previously had them all turned off, it turns off the ATTR_READONLY bit on the server, and resets the mode back to what it would normally be (generally, the file_mode or dir_mode of the share). Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fe752fd..722be54 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1575,7 +1575,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) attrs->ia_valid &= ~ATTR_MODE; if (attrs->ia_valid & ATTR_MODE) { - cFYI(1, ("Mode changed to 0x%x", attrs->ia_mode)); + cFYI(1, ("Mode changed to 0%o", attrs->ia_mode)); mode = attrs->ia_mode; } @@ -1590,18 +1590,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) rc = mode_to_acl(inode, full_path, mode); - else if ((mode & S_IWUGO) == 0) { -#else - if ((mode & S_IWUGO) == 0) { + else #endif - /* not writeable */ - if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) { - set_dosattr = true; - time_buf.Attributes = - cpu_to_le32(cifsInode->cifsAttrs | - ATTR_READONLY); - } - } else if (cifsInode->cifsAttrs & ATTR_READONLY) { + if (((mode & S_IWUGO) == 0) && + (cifsInode->cifsAttrs & ATTR_READONLY) == 0) { + set_dosattr = true; + time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs | + ATTR_READONLY); + /* fix up mode if we're not using dynperm */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + attrs->ia_mode = inode->i_mode & ~S_IWUGO; + } else if ((mode & S_IWUGO) && + (cifsInode->cifsAttrs & ATTR_READONLY)) { /* If file is readonly on server, we would not be able to write to it - so if any write bit is enabled for user or group or other we @@ -1612,6 +1612,20 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) /* Windows ignores set to zero */ if (time_buf.Attributes == 0) time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL); + + /* reset local inode permissions to normal */ + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { + attrs->ia_mode &= ~(S_IALLUGO); + if (S_ISDIR(inode->i_mode)) + attrs->ia_mode |= + cifs_sb->mnt_dir_mode; + else + attrs->ia_mode |= + cifs_sb->mnt_file_mode; + } + } else if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { + /* ignore mode change - ATTR_READONLY hasn't changed */ + attrs->ia_valid &= ~ATTR_MODE; } } -- cgit v0.10.2 From 03cddb80ed2dacaf03c370d38bcc75f8303a03b8 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 5 Jun 2008 20:59:29 -0400 Subject: ext4: Fix use of uninitialized data with debug enabled. Fix use of uninitialized data with debug enabled. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 873ad9b..c9900aa 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2745,8 +2745,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, sbi = EXT4_SB(sb); es = sbi->s_es; - ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group, - gdp->bg_free_blocks_count); err = -EIO; bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group); @@ -2762,6 +2760,9 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, if (!gdp) goto out_err; + ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group, + gdp->bg_free_blocks_count); + err = ext4_journal_get_write_access(handle, gdp_bh); if (err) goto out_err; @@ -3094,8 +3095,7 @@ static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac, static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, struct ext4_prealloc_space *pa) { - unsigned len = ac->ac_o_ex.fe_len; - + unsigned int len = ac->ac_o_ex.fe_len; ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart, &ac->ac_b_ex.fe_group, &ac->ac_b_ex.fe_start); -- cgit v0.10.2 From 0bf7e8379ce7e0159a2a6bd3d937f2f6ada79799 Mon Sep 17 00:00:00 2001 From: "Jose R. Santos" Date: Tue, 3 Jun 2008 14:07:29 -0400 Subject: ext4: Fix uninit block group initialization with FLEX_BG With FLEX_BG block bitmaps, inode bitmaps and inode tables _MAY_ be allocated outside the group. So, when initializing an uninitialized block bitmap, we need to check the location of this blocks before setting the corresponding bits in the block bitmap of the newly initialized group. Also return the right number of free blocks when counting the available free blocks in uninit group. Tested-by: Aneesh Kumar K.V Signed-off-by: Jose R. Santos Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 30494c5..9cc80b9 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -43,6 +43,46 @@ void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr, } +static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block, + ext4_group_t block_group) +{ + ext4_group_t actual_group; + ext4_get_group_no_and_offset(sb, block, &actual_group, 0); + if (actual_group == block_group) + return 1; + return 0; +} + +static int ext4_group_used_meta_blocks(struct super_block *sb, + ext4_group_t block_group) +{ + ext4_fsblk_t tmp; + struct ext4_sb_info *sbi = EXT4_SB(sb); + /* block bitmap, inode bitmap, and inode table blocks */ + int used_blocks = sbi->s_itb_per_group + 2; + + if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) { + struct ext4_group_desc *gdp; + struct buffer_head *bh; + + gdp = ext4_get_group_desc(sb, block_group, &bh); + if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp), + block_group)) + used_blocks--; + + if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp), + block_group)) + used_blocks--; + + tmp = ext4_inode_table(sb, gdp); + for (; tmp < ext4_inode_table(sb, gdp) + + sbi->s_itb_per_group; tmp++) { + if (!ext4_block_in_group(sb, tmp, block_group)) + used_blocks -= 1; + } + } + return used_blocks; +} /* Initializes an uninitialized block bitmap if given, and returns the * number of blocks free in the group. */ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, @@ -105,20 +145,34 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, free_blocks = group_blocks - bit_max; if (bh) { - ext4_fsblk_t start; + ext4_fsblk_t start, tmp; + int flex_bg = 0; for (bit = 0; bit < bit_max; bit++) ext4_set_bit(bit, bh->b_data); start = ext4_group_first_block_no(sb, block_group); - /* Set bits for block and inode bitmaps, and inode table */ - ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data); - ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data); - for (bit = (ext4_inode_table(sb, gdp) - start), - bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++) - ext4_set_bit(bit, bh->b_data); + if (EXT4_HAS_INCOMPAT_FEATURE(sb, + EXT4_FEATURE_INCOMPAT_FLEX_BG)) + flex_bg = 1; + /* Set bits for block and inode bitmaps, and inode table */ + tmp = ext4_block_bitmap(sb, gdp); + if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + + tmp = ext4_inode_bitmap(sb, gdp); + if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + + tmp = ext4_inode_table(sb, gdp); + for (; tmp < ext4_inode_table(sb, gdp) + + sbi->s_itb_per_group; tmp++) { + if (!flex_bg || + ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + } /* * Also if the number of blocks within the group is * less than the blocksize * 8 ( which is the size @@ -126,8 +180,7 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, */ mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data); } - - return free_blocks - sbi->s_itb_per_group - 2; + return free_blocks - ext4_group_used_meta_blocks(sb, block_group); } -- cgit v0.10.2 From 944600930a37aa725ba6f93c3244e2d77a1e3581 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 6 Jun 2008 18:05:52 -0400 Subject: ext4: fix online resize bug There is a bug when we are trying to verify that the reserve inode's double indirect blocks point back to the primary gdt blocks. The fix is obvious, we need to mod the gdb count by the addr's per block. This was verified using the same testcase as with the ext3 equivalent of this patch. Signed-off-by: Josef Bacik Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 9f086a6..9ecb92f 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -563,7 +563,8 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode, } blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count; + data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count % + EXT4_ADDR_PER_BLOCK(sb)); end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb); /* Get each reserved primary GDT block and verify it holds backups */ -- cgit v0.10.2 From 8ea76900be3b4522396e2021260d2818a27b3a5b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 26 May 2008 10:28:09 -0400 Subject: jbd2: Fix memory leak when verifying checksums in the journal Cc: Andreas Dilger Cc: Girish Shilamkar Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 5d0405a..7199db5 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -344,6 +344,7 @@ static int calc_chksums(journal_t *journal, struct buffer_head *bh, *crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data, obh->b_size); } + put_bh(obh); } return 0; } -- cgit v0.10.2 From 624080eded68738daee041ad64672a9d2614754f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 6 Jun 2008 17:50:40 -0400 Subject: jbd2: If a journal checksum error is detected, propagate the error to ext4 If a journal checksum error is detected, the ext4 filesystem will call ext4_error(), and the mount will either continue, become a read-only mount, or cause a kernel panic based on the superblock flags indicating the user's preference of what to do in case of filesystem corruption being detected. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 09d9359..d01a32e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2189,6 +2189,29 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) { if (ext4_load_journal(sb, es, journal_devnum)) goto failed_mount3; + if (!(sb->s_flags & MS_RDONLY) && + EXT4_SB(sb)->s_journal->j_failed_commit) { + printk(KERN_CRIT "EXT4-fs error (device %s): " + "ext4_fill_super: Journal transaction " + "%u is corrupt\n", sb->s_id, + EXT4_SB(sb)->s_journal->j_failed_commit); + if (test_opt (sb, ERRORS_RO)) { + printk (KERN_CRIT + "Mounting filesystem read-only\n"); + sb->s_flags |= MS_RDONLY; + EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; + es->s_state |= cpu_to_le16(EXT4_ERROR_FS); + } + if (test_opt(sb, ERRORS_PANIC)) { + EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; + es->s_state |= cpu_to_le16(EXT4_ERROR_FS); + ext4_commit_super(sb, es, 1); + printk(KERN_CRIT + "EXT4-fs (device %s): mount failed\n", + sb->s_id); + goto failed_mount4; + } + } } else if (journal_inum) { if (ext4_create_journal(sb, es, journal_inum)) goto failed_mount3; diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 7199db5..058f50f 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -611,9 +611,8 @@ static int do_one_pass(journal_t *journal, chksum_err = chksum_seen = 0; if (info->end_transaction) { - printk(KERN_ERR "JBD: Transaction %u " - "found to be corrupt.\n", - next_commit_ID - 1); + journal->j_failed_commit = + info->end_transaction; brelse(bh); break; } @@ -644,10 +643,8 @@ static int do_one_pass(journal_t *journal, if (!JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){ - printk(KERN_ERR - "JBD: Transaction %u " - "found to be corrupt.\n", - next_commit_ID); + journal->j_failed_commit = + next_commit_ID; brelse(bh); break; } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 05e2b30..d147f0f 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -919,6 +919,9 @@ struct journal_s struct proc_dir_entry *j_proc_entry; struct transaction_stats_s j_stats; + /* Failed journal commit ID */ + unsigned int j_failed_commit; + /* * An opaque pointer to fs-private information. ext3 puts its * superblock pointer here -- cgit v0.10.2 From cd0b6a39a1d68b61b1073662f40f747c8b728f98 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 26 May 2008 10:28:28 -0400 Subject: ext4: Display the journal_async_commit mount option in /proc/mounts Cc: Andreas Dilger Cc: Girish Shilamkar Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d01a32e..ba92c60 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -731,6 +731,8 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) } if (test_opt(sb, BARRIER)) seq_puts(seq, ",barrier=1"); + if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) + seq_puts(seq, ",journal_async_commit"); if (test_opt(sb, NOBH)) seq_puts(seq, ",nobh"); if (!test_opt(sb, EXTENTS)) -- cgit v0.10.2 From 034772b068be62a79470d6c1b81b01fbe27793ac Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 3 Jun 2008 22:31:11 -0400 Subject: jbd2: Fix barrier fallback code to re-lock the buffer head If the device doesn't support write barriers, the write is retried without ordered mode. But the buffer head needs to be re-locked or submit_bh will fail with on BUG(!buffer_locked(bh)). Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 4d99685..a2ed72f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -168,6 +168,7 @@ static int journal_submit_commit_record(journal_t *journal, spin_unlock(&journal->j_state_lock); /* And try again, without the barrier */ + lock_buffer(bh); set_buffer_uptodate(bh); set_buffer_dirty(bh); ret = submit_bh(WRITE, bh); -- cgit v0.10.2 From 571640cad3fda6475da45d91cf86076f1f86bd9b Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 26 May 2008 12:29:46 -0400 Subject: ext4: enable barriers by default I can't think of any valid reason for ext4 to not use barriers when they are available; I believe this is necessary for filesystem integrity in the face of a volatile write cache on storage. An administrator who trusts that the cache is sufficiently battery- backed (and power supplies are sufficiently redundant, etc...) can always turn it back off again. SuSE has carried such a patch for ext3 for quite some time now. Also document the mount option while we're at it. Signed-off-by: Eric Sandeen Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 560f88d..0c5086d 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -139,8 +139,16 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata Setting it to very large values will improve performance. -barrier=1 This enables/disables barriers. barrier=0 disables - it, barrier=1 enables it. +barrier=<0|1(*)> This enables/disables the use of write barriers in + the jbd code. barrier=0 disables, barrier=1 enables. + This also requires an IO stack which can support + barriers, and if jbd gets an error on a barrier + write, it will disable again with a warning. + Write barriers enforce proper on-disk ordering + of journal commits, making volatile disk write caches + safe to use, at some performance penalty. If + your disks are battery-backed in one way or another, + disabling barriers may safely improve performance. orlov (*) This enables the new Orlov block allocator. It is enabled by default. diff --git a/fs/ext4/super.c b/fs/ext4/super.c index ba92c60..cb96f127c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -671,6 +671,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) unsigned long def_mount_opts; struct super_block *sb = vfs->mnt_sb; struct ext4_sb_info *sbi = EXT4_SB(sb); + journal_t *journal = sbi->s_journal; struct ext4_super_block *es = sbi->s_es; def_mount_opts = le32_to_cpu(es->s_default_mount_opts); @@ -729,8 +730,13 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_printf(seq, ",commit=%u", (unsigned) (sbi->s_commit_interval / HZ)); } - if (test_opt(sb, BARRIER)) - seq_puts(seq, ",barrier=1"); + /* + * We're changing the default of barrier mount option, so + * let's always display its mount state so it's clear what its + * status is. + */ + seq_puts(seq, ",barrier="); + seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0"); if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) seq_puts(seq, ",journal_async_commit"); if (test_opt(sb, NOBH)) @@ -1909,6 +1915,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_resgid = le16_to_cpu(es->s_def_resgid); set_opt(sbi->s_mount_opt, RESERVATION); + set_opt(sbi->s_mount_opt, BARRIER); /* * turn on extents feature by default in ext4 filesystem -- cgit v0.10.2 From e8ffef73c8dd2c2d00287829db87cdaf229d3859 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 26 May 2008 15:20:34 -0700 Subject: IB/ipath: Avoid test_bit() on u64 SDMA status value Gabriel C pointed out that when the x86 bitops are updated to operate on unsigned long, the code in sdma_abort_task() will produce warnings: drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task': drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type and so on, because it uses test_bit() to operation on a u64 value (returned by ipath_read_kref64() for a hardware register). Fix up these warnings by converting the test_bit() operations to &ing with appropriate symbolic defines of the bits within the hardware register. This has the benign side-effect of making the code more self-documenting as well. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 59a8b25..0bd8bcb 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -232,6 +232,11 @@ struct ipath_sdma_desc { #define IPATH_SDMA_TXREQ_S_ABORTED 2 #define IPATH_SDMA_TXREQ_S_SHUTDOWN 3 +#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63) +#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62) +#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61) +#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30) + /* max dwords in small buffer packet */ #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2) diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 0a8c1b8..eaba032 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -263,14 +263,10 @@ static void sdma_abort_task(unsigned long opaque) hwstatus = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus); - if (/* ScoreBoardDrainInProg */ - test_bit(63, &hwstatus) || - /* AbortInProg */ - test_bit(62, &hwstatus) || - /* InternalSDmaEnable */ - test_bit(61, &hwstatus) || - /* ScbEmpty */ - !test_bit(30, &hwstatus)) { + if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG | + IPATH_SDMA_STATUS_ABORT_IN_PROG | + IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) || + !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) { if (dd->ipath_sdma_reset_wait > 0) { /* not done shutting down sdma */ --dd->ipath_sdma_reset_wait; -- cgit v0.10.2 From 03031f71c7e64aada1add057ccc4a8bc6a79924c Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 26 May 2008 15:22:17 -0700 Subject: IB/ipath: Fix device capability flags The driver supports a few features (RNR NAK, port active event, SRQ resize) that were not reported in the device capability flags. This patch fixes that. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index e0ec540..7779165 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1494,7 +1494,8 @@ static int ipath_query_device(struct ib_device *ibdev, props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR | IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT | - IB_DEVICE_SYS_IMAGE_GUID; + IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | + IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; props->page_size_cap = PAGE_SIZE; props->vendor_id = dev->dd->ipath_vendorid; props->vendor_part_id = dev->dd->ipath_deviceid; -- cgit v0.10.2 From 5f6256066790e1a9a90438f5eece73069c531ffc Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 26 May 2008 15:23:32 -0700 Subject: MAINTAINERS: Update NetEffect (iw_nes) entry Add Chien and remove Nishi from maintainers list for NetEffect. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/MAINTAINERS b/MAINTAINERS index 0a6d2ca..bd3badb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2866,8 +2866,8 @@ S: Maintained NETEFFECT IWARP RNIC DRIVER (IW_NES) P: Faisal Latif M: flatif@neteffect.com -P: Nishi Gupta -M: ngupta@neteffect.com +P: Chien Tung +M: ctung@neteffect.com P: Glenn Streiff M: gstreiff@neteffect.com L: general@lists.openfabrics.org -- cgit v0.10.2 From 7ba2db5f38955907e46a65c9334d287cd3da32c2 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Thu, 13 Mar 2008 14:53:56 -0500 Subject: [SCSI] fusion mpt: fix target missing after resetting external raid Following a hard reset of a SAS raid, one of the raid targets is occasionally missing. I tracked this down to a pretty obscure little bug. The LSI fusion drivers for SAS and Fibre Channel both use their respective transport layers. Those transport layers increment the target number assigned to new targets. The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host structure to avoid scanning the scsi host adapter. Both fusion drivers set "this_id" from a value returned in a firmware PortFacts response. For my particular test case (SAS) the firmware id assigned to the initiator was 173. After enough raid resets to cause the raid targets to go and come a sufficient number of times, the id assigned by the transport to a raid target would match the id assigned by the host adapter to the "this_id" field, resulting in that target not being scanned. Fix by not assigning this_id and not checking it in slave_configure. Signed-off-by: Michael Reed Acked-by: "Moore, Eric" Signed-off-by: James Bottomley diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 3cdd4e9..1e24ab4 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -1238,8 +1238,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->max_id = ioc->pfacts->MaxDevices; sh->max_lun = max_lun; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 4684807..4d492ba 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -3193,8 +3193,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->transportt = mptsas_transport_template; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b109bd8..c68ef00 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2451,12 +2451,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, sdev->sdtr, sdev->wdtr, sdev->ppr, sdev->inquiry_len)); - if (sdev->id > sh->max_id) { - /* error case, should never happen */ - scsi_adjust_queue_depth(sdev, 0, 1); - goto slave_configure_exit; - } - vdevice->configured_lun = 1; mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); @@ -2470,8 +2464,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, vtarget->negoFlags, vtarget->maxOffset, vtarget->minSyncFactor)); -slave_configure_exit: - dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "tagged %d, simple %d, ordered %d\n", ioc->name,sdev->tagged_supported, sdev->simple_tags, -- cgit v0.10.2 From ca61668b82a902143997794aae3f681a602e6ebc Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 19 May 2008 10:27:56 -0500 Subject: [SCSI] ibmvscsi: Non SCSI error status fixup Some versions of the Virtual I/O Server on Power return 0x99 in the non-SCSI error status field as success, rather than 0. This fixes the ibmvscsi driver to treat this response as success. Signed-off-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index ccfd8ac..5d23368 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1348,7 +1348,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq, del_timer(&evt_struct->timer); - if (crq->status != VIOSRP_OK && evt_struct->cmnd) + if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd) evt_struct->cmnd->result = DID_ERROR << 16; if (evt_struct->done) evt_struct->done(evt_struct); diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h index 4c4aadb..2046045 100644 --- a/drivers/scsi/ibmvscsi/viosrp.h +++ b/drivers/scsi/ibmvscsi/viosrp.h @@ -65,7 +65,8 @@ enum viosrp_crq_status { VIOSRP_VIOLATES_MAX_XFER = 0x2, VIOSRP_PARTNER_PANIC = 0x3, VIOSRP_DEVICE_BUSY = 0x8, - VIOSRP_ADAPTER_FAIL = 0x10 + VIOSRP_ADAPTER_FAIL = 0x10, + VIOSRP_OK2 = 0x99, }; struct viosrp_crq { -- cgit v0.10.2 From cc94bc37d5e02aaf8a6409a28e3c62bbd479b9a8 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Mon, 19 May 2008 14:58:43 -0700 Subject: LSM: remove stale web site from MAINTAINERS Pointed out by Adrian Bunk. Signed-off-by: Chris Wright diff --git a/MAINTAINERS b/MAINTAINERS index 0a6d2ca..2852a02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2565,7 +2565,6 @@ LINUX SECURITY MODULE (LSM) FRAMEWORK P: Chris Wright M: chrisw@sous-sol.org L: linux-security-module@vger.kernel.org -W: http://lsm.immunix.org T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported -- cgit v0.10.2 From 827e609b4581282b98bdf7666f6e93ff1bd1a63e Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 28 May 2008 12:49:56 -0500 Subject: kgdb: use common ascii helpers and put_unaligned_be32 helper Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Jason Wessel diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index fa39410..2763ae0 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -119,7 +119,6 @@ } while (0) #define MAX_CONFIG_LEN 40 -static const char hexchars[] = "0123456789abcdef"; static struct kgdb_io kgdbts_io_ops; static char get_buf[BUFMAX]; static int get_buf_cnt; @@ -619,8 +618,8 @@ static void fill_get_buf(char *buf) count++; } strcat(get_buf, "#"); - get_buf[count + 2] = hexchars[checksum >> 4]; - get_buf[count + 3] = hexchars[checksum & 0xf]; + get_buf[count + 2] = hex_asc_hi(checksum); + get_buf[count + 3] = hex_asc_lo(checksum); get_buf[count + 4] = '\0'; v2printk("get%i: %s\n", ts.idx, get_buf); } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 14787de..79e3c90 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -52,6 +52,7 @@ #include #include #include +#include static int kgdb_break_asap; @@ -227,8 +228,6 @@ void __weak kgdb_disable_hw_debug(struct pt_regs *regs) * GDB remote protocol parser: */ -static const char hexchars[] = "0123456789abcdef"; - static int hex(char ch) { if ((ch >= 'a') && (ch <= 'f')) @@ -316,8 +315,8 @@ static void put_packet(char *buffer) } kgdb_io_ops->write_char('#'); - kgdb_io_ops->write_char(hexchars[checksum >> 4]); - kgdb_io_ops->write_char(hexchars[checksum & 0xf]); + kgdb_io_ops->write_char(hex_asc_hi(checksum)); + kgdb_io_ops->write_char(hex_asc_lo(checksum)); if (kgdb_io_ops->flush) kgdb_io_ops->flush(); @@ -478,8 +477,8 @@ static void error_packet(char *pkt, int error) { error = -error; pkt[0] = 'E'; - pkt[1] = hexchars[(error / 10)]; - pkt[2] = hexchars[(error % 10)]; + pkt[1] = hex_asc[(error / 10)]; + pkt[2] = hex_asc[(error % 10)]; pkt[3] = '\0'; } @@ -510,10 +509,7 @@ static void int_to_threadref(unsigned char *id, int value) scan = (unsigned char *)id; while (i--) *scan++ = 0; - *scan++ = (value >> 24) & 0xff; - *scan++ = (value >> 16) & 0xff; - *scan++ = (value >> 8) & 0xff; - *scan++ = (value & 0xff); + put_unaligned_be32(value, scan); } static struct task_struct *getthread(struct pt_regs *regs, int tid) -- cgit v0.10.2 From b33cb815b565a94c654a0fe8e62e36f5b4053888 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 28 May 2008 12:49:57 -0500 Subject: kgdbts: Use HW breakpoints with CONFIG_DEBUG_RODATA Whenever CONFIG_DEBUG_RODATA is set in the kernel config many kernel text sections become read-only, and the use of software breakpoints in the kgdb tests will cause the kernel to fail to complete the start up. Until such time that there is an official API for modifying read-only text sections hardware breakpoints must be used to run the do_fork or sys_open tests or the tests get skipped. Also fix the duplicated include reported by: Huang Weiyi Signed-off-by: Jason Wessel diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 2763ae0..e4ff50b 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -102,7 +102,6 @@ #include #include #include -#include #define v1printk(a...) do { \ if (verbose) \ @@ -130,6 +129,8 @@ static int repeat_test; static int test_complete; static int send_ack; static int final_ack; +static int force_hwbrks; +static int hwbreaks_ok; static int hw_break_val; static int hw_break_val2; #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC) @@ -233,12 +234,12 @@ static void break_helper(char *bp_type, char *arg, unsigned long vaddr) static void sw_break(char *arg) { - break_helper("Z0", arg, 0); + break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0); } static void sw_rem_break(char *arg) { - break_helper("z0", arg, 0); + break_helper(force_hwbrks ? "z1" : "z0", arg, 0); } static void hw_break(char *arg) @@ -780,6 +781,8 @@ static void run_breakpoint_test(int is_hw_breakpoint) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + if (is_hw_breakpoint) + hwbreaks_ok = 0; } static void run_hw_break_test(int is_write_test) @@ -797,9 +800,11 @@ static void run_hw_break_test(int is_write_test) kgdb_breakpoint(); hw_break_val_access(); if (is_write_test) { - if (test_complete == 2) + if (test_complete == 2) { eprintk("kgdbts: ERROR %s broke on access\n", ts.name); + hwbreaks_ok = 0; + } hw_break_val_write(); } kgdb_breakpoint(); @@ -808,6 +813,7 @@ static void run_hw_break_test(int is_write_test) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + hwbreaks_ok = 0; } static void run_nmi_sleep_test(int nmi_sleep) @@ -911,6 +917,7 @@ static void kgdbts_run_tests(void) /* All HW break point tests */ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { + hwbreaks_ok = 1; v1printk("kgdbts:RUN hw breakpoint test\n"); run_breakpoint_test(1); v1printk("kgdbts:RUN hw write breakpoint test\n"); @@ -924,6 +931,19 @@ static void kgdbts_run_tests(void) run_nmi_sleep_test(nmi_sleep); } +#ifdef CONFIG_DEBUG_RODATA + /* Until there is an api to write to read-only text segments, use + * HW breakpoints for the remainder of any tests, else print a + * failure message if hw breakpoints do not work. + */ + if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) { + eprintk("kgdbts: HW breakpoints do not work," + "skipping remaining tests\n"); + return; + } + force_hwbrks = 1; +#endif /* CONFIG_DEBUG_RODATA */ + /* If the do_fork test is run it will be the last test that is * executed because a kernel thread will be spawned at the very * end to unregister the debug hooks. -- cgit v0.10.2 From fbaa20f66a8283359523dfe961ebe66f0b8fac59 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 May 2008 02:01:28 -0700 Subject: sparc64: IO accessors fix From: Benjamin Herrenschmidt I added a full memory clobber on all asm accessors except the _raw ones. Signed-off-by: David S. Miller diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h index c299b85..3158960 100644 --- a/include/asm-sparc64/io.h +++ b/include/asm-sparc64/io.h @@ -24,7 +24,8 @@ static inline u8 _inb(unsigned long addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -35,7 +36,8 @@ static inline u16 _inw(unsigned long addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -46,7 +48,8 @@ static inline u32 _inl(unsigned long addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -55,21 +58,24 @@ static inline void _outb(u8 b, unsigned long addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _outw(u16 w, unsigned long addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _outl(u32 l, unsigned long addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } #define inb(__addr) (_inb((unsigned long)(__addr))) @@ -128,7 +134,8 @@ static inline u8 _readb(const volatile void __iomem *addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -137,7 +144,8 @@ static inline u16 _readw(const volatile void __iomem *addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -147,7 +155,8 @@ static inline u32 _readl(const volatile void __iomem *addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -157,7 +166,8 @@ static inline u64 _readq(const volatile void __iomem *addr) __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -166,28 +176,32 @@ static inline void _writeb(u8 b, volatile void __iomem *addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writew(u16 w, volatile void __iomem *addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writel(u32 l, volatile void __iomem *addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writeq(u64 q, volatile void __iomem *addr) { __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */" : /* no outputs */ - : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } #define readb(__addr) _readb(__addr) @@ -299,7 +313,8 @@ static inline u8 _sbus_readb(const volatile void __iomem *addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -310,7 +325,8 @@ static inline u16 _sbus_readw(const volatile void __iomem *addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -321,7 +337,8 @@ static inline u32 _sbus_readl(const volatile void __iomem *addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -332,7 +349,8 @@ static inline u64 _sbus_readq(const volatile void __iomem *addr) __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -341,28 +359,32 @@ static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writew(u16 w, volatile void __iomem *addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writel(u32 l, volatile void __iomem *addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writeq(u64 l, volatile void __iomem *addr) { __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } #define sbus_readb(__addr) _sbus_readb(__addr) -- cgit v0.10.2 From e48d6d97bb6bd8c008045ea0522ea8278fdccc55 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 May 2008 08:16:56 +0200 Subject: [ALSA] ac97 - Fix ASUS A9T laptop output ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 049edc5..9c309da 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -505,6 +505,7 @@ struct snd_ac97 { unsigned short pcmreg[3]; // PCM registers unsigned short codec_cfg[3]; // CODEC_CFG bits unsigned char swap_mic_linein; // AD1986/AD1986A only + unsigned char lo_as_master; /* LO as master */ } ad18xx; unsigned int dev_flags; /* device specific */ } spec; diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 2da8981..1292dce 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1971,6 +1971,9 @@ static int snd_ac97_ad1888_lohpsel_get(struct snd_kcontrol *kcontrol, struct snd val = ac97->regs[AC97_AD_MISC]; ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL); + if (ac97->spec.ad18xx.lo_as_master) + ucontrol->value.integer.value[0] = + !ucontrol->value.integer.value[0]; return 0; } @@ -1979,8 +1982,10 @@ static int snd_ac97_ad1888_lohpsel_put(struct snd_kcontrol *kcontrol, struct snd struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val; - val = !ucontrol->value.integer.value[0] - ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0; + val = !ucontrol->value.integer.value[0]; + if (ac97->spec.ad18xx.lo_as_master) + val = !val; + val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0; return snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val); } @@ -2031,7 +2036,7 @@ static void ad1888_update_jacks(struct snd_ac97 *ac97) { unsigned short val = 0; /* clear LODIS if shared jack is to be used for Surround out */ - if (is_shared_linein(ac97)) + if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97)) val |= (1 << 12); /* clear CLDIS if shared jack is to be used for C/LFE out */ if (is_shared_micin(ac97)) @@ -2067,9 +2072,13 @@ static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = { static int patch_ad1888_specific(struct snd_ac97 *ac97) { - /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ - snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback"); - snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback"); + if (!ac97->spec.ad18xx.lo_as_master) { + /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ + snd_ac97_rename_vol_ctl(ac97, "Master Playback", + "Master Surround Playback"); + snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", + "Master Playback"); + } return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls)); } @@ -2088,16 +2097,27 @@ static int patch_ad1888(struct snd_ac97 * ac97) patch_ad1881(ac97); ac97->build_ops = &patch_ad1888_build_ops; - /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */ - /* it seems that most vendors connect line-out connector to headphone out of AC'97 */ + + /* + * LO can be used as a real line-out on some devices, + * and we need to revert the front/surround mixer switches + */ + if (ac97->subsystem_vendor == 0x1043 && + ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */ + ac97->spec.ad18xx.lo_as_master = 1; + + misc = snd_ac97_read(ac97, AC97_AD_MISC); /* AD-compatible mode */ /* Stereo mutes enabled */ - misc = snd_ac97_read(ac97, AC97_AD_MISC); - snd_ac97_write_cache(ac97, AC97_AD_MISC, misc | - AC97_AD198X_LOSEL | - AC97_AD198X_HPSEL | - AC97_AD198X_MSPLT | - AC97_AD198X_AC97NC); + misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC; + if (!ac97->spec.ad18xx.lo_as_master) + /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */ + /* it seems that most vendors connect line-out connector to + * headphone out of AC'97 + */ + misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL; + + snd_ac97_write_cache(ac97, AC97_AD_MISC, misc); ac97->flags |= AC97_STEREO_MUTES; return 0; } -- cgit v0.10.2 From 269ef19caa16650bf3a68fd33a6cb800683419dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 15:32:15 +0200 Subject: [ALSA] hda - Fix mic input on HP2133 The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index ff1b922..a99e86d 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3644,33 +3644,17 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = { { } /* end */ }; -static struct hda_input_mux ad1884a_mobile_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x1 }, /* port-C */ - { "Mix", 0x3 }, - }, -}; - static struct snd_kcontrol_new ad1884a_mobile_mixers[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT), HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = ad198x_mux_enum_info, - .get = ad198x_mux_enum_get, - .put = ad198x_mux_enum_put, - }, { } /* end */ }; @@ -3687,14 +3671,31 @@ static void ad1884a_hp_automute(struct hda_codec *codec) present ? 0x00 : 0x02); } +/* switch to external mic if plugged */ +static void ad1884a_hp_automic(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL, + present ? 0 : 1); +} + #define AD1884A_HP_EVENT 0x37 +#define AD1884A_MIC_EVENT 0x36 /* unsolicited event for HP jack sensing */ static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res) { - if ((res >> 26) != AD1884A_HP_EVENT) - return; - ad1884a_hp_automute(codec); + switch (res >> 26) { + case AD1884A_HP_EVENT: + ad1884a_hp_automute(codec); + break; + case AD1884A_MIC_EVENT: + ad1884a_hp_automic(codec); + break; + } } /* initialize jack-sensing, too */ @@ -3702,6 +3703,7 @@ static int ad1884a_hp_init(struct hda_codec *codec) { ad198x_init(codec); ad1884a_hp_automute(codec); + ad1884a_hp_automic(codec); return 0; } @@ -3715,10 +3717,15 @@ static struct hda_verb ad1884a_laptop_verbs[] = { /* Port-F pin */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Port-C pin - internal mic-in */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ /* analog mix */ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* unsolicited event for pin-sense */ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT}, { } /* end */ }; @@ -3878,7 +3885,6 @@ static int patch_ad1884a(struct hda_codec *codec) spec->mixers[0] = ad1884a_mobile_mixers; spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs; spec->multiout.dig_out_nid = 0; - spec->input_mux = &ad1884a_mobile_capture_source; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; break; -- cgit v0.10.2 From 79d06432a27601f096e08716fee3f0a7d3b68d5f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 16:54:49 +0200 Subject: [ALSA] hda - Fix model for LG LS75 laptop Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index c73ce07..6ef57fb 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -611,6 +611,7 @@ static const char *cmi9880_models[CMI_MODELS] = { static struct snd_pci_quirk cmi9880_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG), + SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL), SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG), {} /* terminator */ }; -- cgit v0.10.2 From 3c39740073b20d4cbb0e3567225500e96acf383c Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:39 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 14bcd7c..ec63b79 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -272,8 +272,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) uint32_t rscn_entry, host_pid; uint8_t rscn_queue_index; unsigned long flags; - scsi_qla_host_t *vha; - int i; /* Setup to process RIO completion. */ handle_cnt = 0; @@ -544,18 +542,10 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_PORT_UPDATE: /* Port database update */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; + /* * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET * event etc. earlier indicating loop is down) then process @@ -590,18 +580,12 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_RSCN_UPDATE: /* State Change Registration */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Check if the Vport has issued a SCR */ + if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags)) + break; + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n", ha->host_no)); -- cgit v0.10.2 From 08b95a12cd956e98b4a1ad5b638935dcb6c88c67 Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:40 -0700 Subject: [SCSI] qla2xxx: Correct handling of AENs postings for vports. Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index fc55429..62a3ad6 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -406,6 +406,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) INIT_LIST_HEAD(&vha->list); INIT_LIST_HEAD(&vha->fcports); INIT_LIST_HEAD(&vha->vp_fcports); + INIT_LIST_HEAD(&vha->work_list); vha->dpc_flags = 0L; set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 817f62f..48eaa3b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2157,13 +2157,14 @@ static int qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked) { unsigned long flags; + scsi_qla_host_t *pha = to_qla_parent(ha); if (!locked) - spin_lock_irqsave(&ha->hardware_lock, flags); + spin_lock_irqsave(&pha->hardware_lock, flags); list_add_tail(&e->list, &ha->work_list); qla2xxx_wake_dpc(ha); if (!locked) - spin_unlock_irqrestore(&ha->hardware_lock, flags); + spin_unlock_irqrestore(&pha->hardware_lock, flags); return QLA_SUCCESS; } @@ -2203,12 +2204,13 @@ static void qla2x00_do_work(struct scsi_qla_host *ha) { struct qla_work_evt *e; + scsi_qla_host_t *pha = to_qla_parent(ha); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); while (!list_empty(&ha->work_list)) { e = list_entry(ha->work_list.next, struct qla_work_evt, list); list_del_init(&e->list); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); switch (e->type) { case QLA_EVT_AEN: @@ -2222,9 +2224,9 @@ qla2x00_do_work(struct scsi_qla_host *ha) } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); } - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); } /************************************************************************** -- cgit v0.10.2 From 28d7647de2ee075aaed5ca835f445e885884f163 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 19 May 2008 14:25:41 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index b42e3f2..d058c88 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k3" +#define QLA2XXX_VERSION "8.02.01-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v0.10.2 From ca05a99a54db1db5bca72eccb5866d2a86f8517f Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Tue, 27 May 2008 22:05:17 -0700 Subject: capabilities: remain source compatible with 32-bit raw legacy capability support. Source code out there hard-codes a notion of what the _LINUX_CAPABILITY_VERSION #define means in terms of the semantics of the raw capability system calls capget() and capset(). Its unfortunate, but true. Since the confusing header file has been in a released kernel, there is software that is erroneously using 64-bit capabilities with the semantics of 32-bit compatibilities. These recently compiled programs may suffer corruption of their memory when sys_getcap() overwrites more memory than they are coded to expect, and the raising of added capabilities when using sys_capset(). As such, this patch does a number of things to clean up the situation for all. It 1. forces the _LINUX_CAPABILITY_VERSION define to always retain its legacy value. 2. adopts a new #define strategy for the kernel's internal implementation of the preferred magic. 3. deprecates v2 capability magic in favor of a new (v3) magic number. The functionality of v3 is entirely equivalent to v2, the only difference being that the v2 magic causes the kernel to log a "deprecated" warning so the admin can find applications that may be using v2 inappropriately. [User space code continues to be encouraged to use the libcap API which protects the application from details like this. libcap-2.10 is the first to support v3 capabilities.] Fixes issue reported in https://bugzilla.redhat.com/show_bug.cgi?id=447518. Thanks to Bojan Smojver for the report. [akpm@linux-foundation.org: s/depreciate/deprecate/g] [akpm@linux-foundation.org: be robust about put_user size] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrew G. Morgan Cc: Serge E. Hallyn Cc: Bojan Smojver Cc: stable@kernel.org Signed-off-by: Andrew Morton Signed-off-by: Chris Wright diff --git a/fs/proc/array.c b/fs/proc/array.c index 9e3b8c3..797d775 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -288,7 +288,7 @@ static void render_cap_t(struct seq_file *m, const char *header, seq_printf(m, "%s", header); CAP_FOR_EACH_U32(__capi) { seq_printf(m, "%08x", - a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]); + a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]); } seq_printf(m, "\n"); } diff --git a/include/linux/capability.h b/include/linux/capability.h index f4ea0dd..fa830f8 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -31,11 +31,11 @@ struct task_struct; #define _LINUX_CAPABILITY_VERSION_1 0x19980330 #define _LINUX_CAPABILITY_U32S_1 1 -#define _LINUX_CAPABILITY_VERSION_2 0x20071026 +#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ #define _LINUX_CAPABILITY_U32S_2 2 -#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_2 -#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_2 +#define _LINUX_CAPABILITY_VERSION_3 0x20080522 +#define _LINUX_CAPABILITY_U32S_3 2 typedef struct __user_cap_header_struct { __u32 version; @@ -77,10 +77,23 @@ struct vfs_cap_data { } data[VFS_CAP_U32]; }; -#ifdef __KERNEL__ +#ifndef __KERNEL__ + +/* + * Backwardly compatible definition for source code - trapped in a + * 32-bit world. If you find you need this, please consider using + * libcap to untrap yourself... + */ +#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 +#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 + +#else + +#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 +#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 typedef struct kernel_cap_struct { - __u32 cap[_LINUX_CAPABILITY_U32S]; + __u32 cap[_KERNEL_CAPABILITY_U32S]; } kernel_cap_t; #define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct)) @@ -351,7 +364,7 @@ typedef struct kernel_cap_struct { */ #define CAP_FOR_EACH_U32(__capi) \ - for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi) + for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ @@ -361,7 +374,7 @@ typedef struct kernel_cap_struct { # define CAP_FS_MASK_B1 (CAP_TO_MASK(CAP_MAC_OVERRIDE)) -#if _LINUX_CAPABILITY_U32S != 2 +#if _KERNEL_CAPABILITY_U32S != 2 # error Fix up hand-coded capability macro initializers #else /* HAND-CODED capability initializers */ @@ -372,7 +385,7 @@ typedef struct kernel_cap_struct { # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \ CAP_FS_MASK_B1 } }) -#endif /* _LINUX_CAPABILITY_U32S != 2 */ +#endif /* _KERNEL_CAPABILITY_U32S != 2 */ #define CAP_INIT_INH_SET CAP_EMPTY_SET diff --git a/kernel/capability.c b/kernel/capability.c index 39e8193..cfbe442 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -53,6 +53,69 @@ static void warn_legacy_capability_use(void) } /* + * Version 2 capabilities worked fine, but the linux/capability.h file + * that accompanied their introduction encouraged their use without + * the necessary user-space source code changes. As such, we have + * created a version 3 with equivalent functionality to version 2, but + * with a header change to protect legacy source code from using + * version 2 when it wanted to use version 1. If your system has code + * that trips the following warning, it is using version 2 specific + * capabilities and may be doing so insecurely. + * + * The remedy is to either upgrade your version of libcap (to 2.10+, + * if the application is linked against it), or recompile your + * application with modern kernel headers and this warning will go + * away. + */ + +static void warn_deprecated_v2(void) +{ + static int warned; + + if (!warned) { + char name[sizeof(current->comm)]; + + printk(KERN_INFO "warning: `%s' uses deprecated v2" + " capabilities in a way that may be insecure.\n", + get_task_comm(name, current)); + warned = 1; + } +} + +/* + * Version check. Return the number of u32s in each capability flag + * array, or a negative value on error. + */ +static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy) +{ + __u32 version; + + if (get_user(version, &header->version)) + return -EFAULT; + + switch (version) { + case _LINUX_CAPABILITY_VERSION_1: + warn_legacy_capability_use(); + *tocopy = _LINUX_CAPABILITY_U32S_1; + break; + case _LINUX_CAPABILITY_VERSION_2: + warn_deprecated_v2(); + /* + * fall through - v3 is otherwise equivalent to v2. + */ + case _LINUX_CAPABILITY_VERSION_3: + *tocopy = _LINUX_CAPABILITY_U32S_3; + break; + default: + if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version)) + return -EFAULT; + return -EINVAL; + } + + return 0; +} + +/* * For sys_getproccap() and sys_setproccap(), any of the three * capability set pointers may be NULL -- indicating that that set is * uninteresting and/or not to be changed. @@ -71,27 +134,13 @@ asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr) { int ret = 0; pid_t pid; - __u32 version; struct task_struct *target; unsigned tocopy; kernel_cap_t pE, pI, pP; - if (get_user(version, &header->version)) - return -EFAULT; - - switch (version) { - case _LINUX_CAPABILITY_VERSION_1: - warn_legacy_capability_use(); - tocopy = _LINUX_CAPABILITY_U32S_1; - break; - case _LINUX_CAPABILITY_VERSION_2: - tocopy = _LINUX_CAPABILITY_U32S_2; - break; - default: - if (put_user(_LINUX_CAPABILITY_VERSION, &header->version)) - return -EFAULT; - return -EINVAL; - } + ret = cap_validate_magic(header, &tocopy); + if (ret != 0) + return ret; if (get_user(pid, &header->pid)) return -EFAULT; @@ -118,7 +167,7 @@ out: spin_unlock(&task_capability_lock); if (!ret) { - struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S]; + struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S]; unsigned i; for (i = 0; i < tocopy; i++) { @@ -128,7 +177,7 @@ out: } /* - * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S, + * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S, * we silently drop the upper capabilities here. This * has the effect of making older libcap * implementations implicitly drop upper capability @@ -240,30 +289,16 @@ static inline int cap_set_all(kernel_cap_t *effective, */ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data) { - struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S]; + struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S]; unsigned i, tocopy; kernel_cap_t inheritable, permitted, effective; - __u32 version; struct task_struct *target; int ret; pid_t pid; - if (get_user(version, &header->version)) - return -EFAULT; - - switch (version) { - case _LINUX_CAPABILITY_VERSION_1: - warn_legacy_capability_use(); - tocopy = _LINUX_CAPABILITY_U32S_1; - break; - case _LINUX_CAPABILITY_VERSION_2: - tocopy = _LINUX_CAPABILITY_U32S_2; - break; - default: - if (put_user(_LINUX_CAPABILITY_VERSION, &header->version)) - return -EFAULT; - return -EINVAL; - } + ret = cap_validate_magic(header, &tocopy); + if (ret != 0) + return ret; if (get_user(pid, &header->pid)) return -EFAULT; @@ -281,7 +316,7 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data) permitted.cap[i] = kdata[i].permitted; inheritable.cap[i] = kdata[i].inheritable; } - while (i < _LINUX_CAPABILITY_U32S) { + while (i < _KERNEL_CAPABILITY_U32S) { effective.cap[i] = 0; permitted.cap[i] = 0; inheritable.cap[i] = 0; -- cgit v0.10.2 From ee48a75c95145bf6af3be329cd7cbbca2ec89a2a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 1 Jun 2008 11:19:33 +0100 Subject: [ARM] fix AT91 include loops AT91 has one include loop in its header files: include/asm-arm/io.h <- include/asm-arm/arch-at91/io.h <- include/asm-arm/io.h Circular include dependencies are dangerous since they can result in inconsistent definitions being provided to other code, especially if '#ifndef' constructs are used. Solve this by removing the offending includes. Built tested using my AT91 configuration. Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h index 80073fd..f8beaa2 100644 --- a/include/asm-arm/arch-at91/io.h +++ b/include/asm-arm/arch-at91/io.h @@ -21,8 +21,6 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xFFFFFFFF #define __io(a) ((void __iomem *)(a)) -- cgit v0.10.2 From 759e9408ad2e7f2115ce8341854be982e0186a8c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sun, 25 May 2008 12:35:38 +0100 Subject: [ARM] 5060/1: remove unnecessary include of asm/io.h Remove unnecessary include of asm/io.h. Signed-off-by: Greg Ungerer Signed-off-by: Russell King diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index 2e5868b..386fcc1 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -16,7 +16,6 @@ #include #include #include -#include /* * Trivial page table functions. -- cgit v0.10.2 From 6d2545738a7c6ad1831d84ecc6483ea21c327bf4 Mon Sep 17 00:00:00 2001 From: eric miao Date: Mon, 26 May 2008 03:23:14 +0100 Subject: [ARM] 5062/1: pxa: remove unused definition of CONFIG_ARCH_COTULLA_IDP Signed-off-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 67ea99e..dd3fbd6 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 -- cgit v0.10.2 From 2beb0e2893b900fa5fb07ccf73a976c06a93b764 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 30 May 2008 01:04:49 +0300 Subject: sh/kernel/cpu/irq/intc-sh5.c build fix This patch fixes the following build error caused by commit a1dc4b59fa4af97ae68ee214d4d72bbd7c7ec1dc (sh: intc_sh5 depends on cayman board for IRQ priority table.): <-- snip --> ... CC arch/sh/kernel/cpu/irq/intc-sh5.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index de45c6a..79baa47 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -242,6 +242,7 @@ void __init plat_irq_setup(void) reg += 8; } } + } #endif /* -- cgit v0.10.2 From 1f9d29493992ddd6af6b3e313a603770f29c0408 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 28 May 2008 16:38:17 -0700 Subject: sh: module.c use kernel unaligned helpers Replace the COPY_UNALIGNED_WORD helper. Signed-off-by: Harvey Harrison Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index b3d0a03..5482e65 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -30,6 +30,7 @@ #include #include #include +#include void *module_alloc(unsigned long size) { @@ -56,34 +57,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } -#ifdef CONFIG_SUPERH32 -#define COPY_UNALIGNED_WORD(sw, tw, align) \ -{ \ - void *__s = &(sw), *__t = &(tw); \ - unsigned short *__s2 = __s, *__t2 = __t; \ - unsigned char *__s1 = __s, *__t1 = __t; \ - switch ((align)) \ - { \ - case 0: \ - *(unsigned long *) __t = *(unsigned long *) __s; \ - break; \ - case 2: \ - *__t2++ = *__s2++; \ - *__t2 = *__s2; \ - break; \ - default: \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1 = *__s1; \ - break; \ - } \ -} -#else -/* One thing SHmedia doesn't screw up! */ -#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); } -#endif - int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, @@ -96,7 +69,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, Elf32_Addr relocation; uint32_t *location; uint32_t value; - int align; pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -109,7 +81,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + ELF32_R_SYM(rel[i].r_info); relocation = sym->st_value + rel[i].r_addend; - align = (int)location & 3; #ifdef CONFIG_SUPERH64 /* For text addresses, bit2 of the st_other field indicates @@ -122,15 +93,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_DIR32: - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_REL32: relocation = (relocation - (Elf32_Addr) location); - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_IMM_LOW16: *location = (*location & ~0x3fffc00) | -- cgit v0.10.2 From d02d6be5d52a98be32c93d2ea7a0068991774a20 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 2 Jun 2008 12:40:14 +0900 Subject: sh: fix miscompilation of ip_fast_csum with gcc >= 4.3 As noted by Matthew Wilcox: Kyle McMartin just tracked down a bug on parisc to a missing "memory" clobber in the inline assembly implementation of ip_fast_csum. The FRV, SH and Xtensa ports are also missing a memory clobber, so I thought it would be polite to let you know. The bug manifests as dropped network packets (obviously they have the wrong checksum). It started appearing for parisc with GCC 4.3. The GCC manual says: If your assembler instructions access memory in an unpredictable fashion, add `memory' to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. I see that FRV has a 400 byte memory output which may prevent this problem from appearing, but SH and Xtensa have nothing to prevent this bug. Hope this saves you a few days of debugging. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h index 4bc8357..14b7ac2 100644 --- a/include/asm-sh/checksum_32.h +++ b/include/asm-sh/checksum_32.h @@ -109,7 +109,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) will assume they contain their original values. */ : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) : "1" (iph), "2" (ihl) - : "t"); + : "t", "memory"); return csum_fold(sum); } -- cgit v0.10.2 From 1f8404ea5fd8c408d0a7c12a88091dffb7b6768b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 2 Jun 2008 13:48:59 +0900 Subject: sh: Disable 4KSTACKS on nommu. 4k stacks on nommu ends up blowing up with all sorts of interesting slab corruption. Disable this by default unless BROKEN is also enabled. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0d2ef1e..0f45498 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -81,7 +81,7 @@ config DEBUG_STACK_USAGE config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && (MMU || BROKEN) help If you say Y here the kernel will use a 4Kb stacksize for the kernel stack attached to each process/thread. This facilitates -- cgit v0.10.2 From b095723526cb80494bd5a13de0e5078f8846866a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Jun 2008 12:58:24 +0100 Subject: [ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisation Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 6d4416a..f5851d1 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = { [2] = { .start = CMX270_ETHIRQ, .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -- cgit v0.10.2 From 31ab3ffb2b20cda79684a0b3a4265fd7170cdacc Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Jun 2008 12:58:23 +0100 Subject: [ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisation Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index edc4f07..9c57700 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -- cgit v0.10.2 From 106f62701fe79fd5c251e5d3e182516344882962 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 28 May 2008 18:37:14 +0100 Subject: [ARM] 5068/1: PXA2xx Additional gpio definitions Some additional alternate gpio definitions relating to FFUART and USB on the pxa27x. These are used on the xbow imote2 platform. Signed-off-by: Jonathan Cameron Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h index 763313c..b81cd63 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -134,7 +134,11 @@ #define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ #define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ #define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO96_FFRXD 96 /* FFUART recieve */ +#define GPIO98_FFRTS 98 /* FFUART request to send */ #define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ +#define GPIO99_FFTXD 99 /* FFUART transmit data */ +#define GPIO100_FFCTS 100 /* FFUART Clear to send */ #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ #define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ #define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ @@ -316,6 +320,8 @@ #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) #define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) #define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) +#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) #define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) #define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) @@ -324,8 +330,11 @@ #define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) #define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) #define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) #define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) #define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) +#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) +#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) #define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) #define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) #define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -- cgit v0.10.2 From ea6a7404da4b381b35bcec48338d376a3873ea46 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 30 May 2008 18:53:55 +0100 Subject: [ARM] 5070/1: pxa: add GPIO104_PSKTSEL to pxa27x MFP configuration PSKTSEL can be routed to GPIO pin 104. This configuration is used by HP iPAQ hx4700. Signed-off-by: Philipp Zabel Acked-by: Jrgen Schindele Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h index eb6eaa1..bc73ab8 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa27x.h +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -112,6 +112,7 @@ #define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) #define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) #define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) +#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH) /* I2C */ #define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) -- cgit v0.10.2 From 1e5c594607778f551b729577b046ee5d9333cfb5 Mon Sep 17 00:00:00 2001 From: surinder Date: Wed, 28 May 2008 09:51:16 +0100 Subject: [ARM] 5067/1: _raw_write_can_lock macro bugfix The current __raw_write_can_lock macro tests whether the lock can be locked by checking if it is equal to 0x80000000, whereas the lock should be lockable if its value is 0 i.e. unlocked state is represented by 0. Hence the macro should test the value of lock against 0 and not 0x80000000. Signed-off-by: Surinder Pal Singh Signed-off-by: Russell King diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h index 800ba52..2b41ebb 100644 --- a/include/asm-arm/spinlock.h +++ b/include/asm-arm/spinlock.h @@ -142,7 +142,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) } /* write_can_lock - would write_trylock() succeed? */ -#define __raw_write_can_lock(x) ((x)->lock == 0x80000000) +#define __raw_write_can_lock(x) ((x)->lock == 0) /* * Read locks are a bit more hairy: -- cgit v0.10.2 From 0ef2cfc0ca4625424e5b8ead6c47359c35a7a841 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 2 Jun 2008 20:38:15 +0100 Subject: [ARM] pxa: fix tosa.c build error Work around: arch/arm/mach-pxa/tosa.c: In function `tosa_poweroff': arch/arm/mach-pxa/tosa.c:470: error: `GPIO_OUT' undeclared (first use in this function) arch/arm/mach-pxa/tosa.c:470: error: (Each undeclared identifier is reported only once arch/arm/mach-pxa/tosa.c:470: error: for each function it appears in.) The proper fix exists in the PXA branch of my kernel git tree, which will be pushed during the next merge window. Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c2cbd66..ab4a9f5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); + gpio_direction_output(TOSA_GPIO_ON_RESET, 0); + gpio_set_value(TOSA_GPIO_ON_RESET, 1); mdelay(1000); arm_machine_restart('h'); -- cgit v0.10.2 From 4b34fe156455d26ee6ed67b61539f136bf4e439c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 2 Jun 2008 16:42:49 -0600 Subject: PNP: mark resources that conflict with PCI devices "disabled" Both the PNP/PCI conflict detection quirk and the PNP system driver must use the same mechanism to mark resources as disabled. I think it's best to keep the resource and to keep the type bit (IORESOURCE_MEM, etc), so that we match the list from firmware as closely as possible. Fixes this regression from 2.6.25: http://lkml.org/lkml/2008/6/1/82 Signed-off-by: Bjorn Helgaas Tested-by: Avuton Olrich Signed-off-by: Linus Torvalds diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index e2b7de4..1ff3bb5 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -286,7 +286,7 @@ static void quirk_system_pci_resources(struct pnp_dev *dev) pci_name(pdev), i, (unsigned long long) pci_start, (unsigned long long) pci_end); - res->flags = 0; + res->flags |= IORESOURCE_DISABLED; } } } diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 9c2496d..8f0a570 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_UNSET) + if (res->flags & IORESOURCE_DISABLED) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v0.10.2 From 1feaa51d84e9611521ec6e59172f9f90db274588 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Jun 2008 12:19:45 +0800 Subject: Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver. Hide difference in head file. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d6b4ead..636b687 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -# ifdef BF54x - if (UART_GET_MSR(uart) & CTS) -# else - if (gpio_get_value(uart->cts_pin)) -# endif + if (UART_GET_CTS(uart)) return TIOCM_DSR | TIOCM_CAR; else #endif @@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); -# else - gpio_set_value(uart->rts_pin, 0); -# endif + UART_CLEAR_RTS(uart); else -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); -# else - gpio_set_value(uart->rts_pin, 1); -# endif + UART_SET_RTS(uart); #endif } @@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, /* Disable UART */ ier = UART_GET_IER(uart); -#ifdef CONFIG_BF54x - UART_CLEAR_IER(uart, 0xF); -#else - UART_PUT_IER(uart, 0); -#endif + UART_DISABLE_INTS(uart); /* Set DLAB in LCR to Access DLL and DLH */ UART_SET_DLAB(uart); @@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_LCR(uart, lcr); /* Enable UART */ -#ifdef CONFIG_BF54x - UART_SET_IER(uart, ier); -#else - UART_PUT_IER(uart, ier); -#endif + UART_ENABLE_INTS(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 26e3c80..96bd09e 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index d016603..e924569 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index f79d1a0..41d7b64 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 5eb46a7..59b4ad4 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -57,6 +57,12 @@ #define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) +#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 7a96287..30d90b5 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN -- cgit v0.10.2 From bd628bd085c459838d38f93f2f154f1a2e019e48 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Jun 2008 12:23:45 +0800 Subject: Blackfin arch: fixup warnings with the new cplb saved values Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 7bfbd95..f061f51 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -67,7 +67,7 @@ void __init trap_init(void) CSYNC(); } -void *saved_icplb_fault_addr, *saved_dcplb_fault_addr; +unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr; int kstack_depth_to_print = 48; @@ -366,7 +366,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START) + if (saved_dcplb_fault_addr < FIXED_CODE_START) printk(KERN_NOTICE "NULL pointer access\n"); else #endif @@ -421,7 +421,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_icplb_fault_addr < (void *)FIXED_CODE_START) + if (saved_icplb_fault_addr < FIXED_CODE_START) printk(KERN_NOTICE "Jump to NULL address\n"); else #endif @@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) oops_in_progress = 1; - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr); dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); -- cgit v0.10.2 From f8cc3566d2e26ba1d9afd063ff5be40014e2e269 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:29:55 +0900 Subject: sh: Update SE7206 defconfig. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 0d0cda90..6b34baa 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Sep 13 16:40:16 2007 +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 20:27:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,47 +27,82 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MM_OWNER=y +CONFIG_CGROUP_MEM_RES_CTLR=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set @@ -81,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_CLASSIC_RCU is not set # # System type @@ -88,7 +126,10 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set CONFIG_CPU_SUBTYPE_SH7206=y +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -97,6 +138,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -105,14 +147,17 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -121,23 +166,25 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -183,13 +230,16 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_SH_CPU_FREQ is not set +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -213,11 +263,15 @@ CONFIG_HEARTBEAT=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_KEXEC is not set +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_GUSA=y # # Boot options @@ -225,25 +279,25 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" +CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" # # Bus options # -# CONFIG_CF_ENABLER is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_SHARED_FLAT=y +CONFIG_BINFMT_MISC=y # # Networking @@ -253,14 +307,24 @@ CONFIG_NET=y # # Networking options # -# CONFIG_PACKET is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -273,14 +337,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -297,10 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -308,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -329,8 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -339,11 +401,9 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -356,6 +416,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -390,7 +451,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -418,13 +478,19 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -443,23 +509,30 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -469,28 +542,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -502,6 +554,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,106 +573,119 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=y # CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -642,10 +708,11 @@ CONFIG_ROMFS_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y -# CONFIG_SYSFS is not set -# CONFIG_TMPFS is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -658,18 +725,28 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -681,30 +758,20 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# - -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -712,7 +779,10 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -722,38 +792,123 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # # Security options # # CONFIG_KEYS is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v0.10.2 From 39eb41ef0732a02acb3babe5ba1df92d76b9fb8f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:30:10 +0900 Subject: sh: Add defconfig for RSK7203. RSK7203 is supportable through the generic machvec, so we add a defconfig for those bits. This gets updated with more complete board support later. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig new file mode 100644 index 0000000..a0ebd43 --- /dev/null +++ b/arch/sh/configs/rsk7203_defconfig @@ -0,0 +1,841 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 13:02:42 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +CONFIG_CPU_SUBTYPE_SH7203=y +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_FPU=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_TIMER_IRQ=142 +CONFIG_SH_PCLK_FREQ=16670800 +CONFIG_SH_CLK_MD=0 +# CONFIG_TICK_ONESHOT is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_BOOTMEM=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From 07bc76dfa19b10017b518dd9aa1b2719e8c863de Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 3 Jun 2008 14:46:34 +0200 Subject: [ALSA] hda - Fix resume of auto-config mode with Realtek codecs The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8f31247..f46df68 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -942,7 +942,6 @@ do_sku: AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT); spec->unsol_event = alc_sku_unsol_event; - spec->init_hook = alc_sku_automute; } /* -- cgit v0.10.2 From 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 3 Jun 2008 15:18:54 +0100 Subject: serial_core: uart_set_ldisc infrastructure The tty layer provides a callback that is used when the line discipline is changed. Some hardware uses this to configure hardware specific features such as IrDA mode on serial ports. Unfortunately the serial layer does not provide this feature or pass it down to drivers. Blackfin used to hack around this by rewriting the tty ops, but those are now properly shared and const so the hack fails. Instead provide the proper operations. This change plus a follow up from the Blackfin guys is needed to avoid blackfin losing features in this release. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 53b03c6..951a75e 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,6 +1165,15 @@ out: return ret; } +static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + if (port->ops->set_ldisc) + port->ops->set_ldisc(port); +} + static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -2288,6 +2297,7 @@ static const struct tty_operations uart_ops = { .unthrottle = uart_unthrottle, .send_xchar = uart_send_xchar, .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, .stop = uart_stop, .start = uart_start, .hangup = uart_hangup, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d32123a..d8f31de 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -192,6 +192,7 @@ struct uart_ops { void (*shutdown)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + void (*set_ldisc)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); int (*set_wake)(struct uart_port *, unsigned int state); -- cgit v0.10.2 From 399dc43bc29fe1ac19340c56c0df84aa0ea53c85 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 3 Jun 2008 15:21:21 -0700 Subject: sparc: switch /proc/led to seq_file Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c index 59e9344..adaaed4 100644 --- a/arch/sparc/kernel/led.c +++ b/arch/sparc/kernel/led.c @@ -2,6 +2,7 @@ #include #include #include +#include #include #include #include @@ -45,21 +46,22 @@ static void led_blink(unsigned long timeout) add_timer(&led_blink_timer); } -static int led_read_proc(char *buf, char **start, off_t offset, int count, - int *eof, void *data) +static int led_proc_show(struct seq_file *m, void *v) { - int len = 0; - if (get_auxio() & AUXIO_LED) - len = sprintf(buf, "on\n"); + seq_puts(m, "on\n"); else - len = sprintf(buf, "off\n"); + seq_puts(m, "off\n"); + return 0; +} - return len; +static int led_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, led_proc_show, NULL); } -static int led_write_proc(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t led_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) { char *buf = NULL; @@ -103,6 +105,15 @@ static int led_write_proc(struct file *file, const char __user *buffer, return count; } +static const struct file_operations led_proc_fops = { + .owner = THIS_MODULE, + .open = led_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = led_proc_write, +}; + static struct proc_dir_entry *led; #define LED_VERSION "0.1" @@ -112,12 +123,9 @@ static int __init led_init(void) init_timer(&led_blink_timer); led_blink_timer.function = led_blink; - led = create_proc_entry("led", 0, NULL); + led = proc_create("led", 0, NULL, &led_proc_fops); if (!led) return -ENOMEM; - - led->read_proc = led_read_proc; /* reader function */ - led->write_proc = led_write_proc; /* writer function */ led->owner = THIS_MODULE; printk(KERN_INFO -- cgit v0.10.2 From 378bd6a5211f05d6d8eb3e78a92e2a197e456e4e Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Wed, 4 Jun 2008 12:08:30 +0200 Subject: [ALSA] hda - COMPAL IFL90/JFL-92 laptop quirk Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon Tested-by: Guri Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f46df68..518b7ca 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10512,6 +10512,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), + SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), -- cgit v0.10.2 From 664d080c41463570b95717b5ad86e79dc1be0877 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Tue, 3 Jun 2008 20:27:59 +0200 Subject: [libata] ACPI: Properly handle bay devices in dock stations * Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett ) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index dbf6ca7..3ff8b14 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -118,12 +118,62 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } -static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device - *dev, u32 event) +static void ata_acpi_eject_device(acpi_handle handle) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = 1; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0", + &arg_list, NULL))) + printk(KERN_ERR "Failed to evaluate _EJ0!\n"); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_port_for_each_link(tlink, ap) + ata_link_for_each_dev(tdev, tlink) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * @is_dock_event: boolean indicating whether the event was a dock one + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event, int is_dock_event) { char event_string[12]; char *envp[] = { event_string, NULL }; - struct ata_eh_info *ehi; + struct ata_eh_info *ehi = &ap->link.eh_info; struct kobject *kobj = NULL; int wait = 0; unsigned long flags; @@ -131,87 +181,100 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device unsigned long sta; acpi_status status; - if (!ap) - ap = dev->link->ap; - ehi = &ap->link.eh_info; - - spin_lock_irqsave(ap->lock, flags); - - if (dev) + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; handle = dev->acpi_handle; - else + } else { + kobj = &ap->dev->kobj; handle = ap->acpi_handle; + } status = acpi_get_handle(handle, "_EJ0", &tmphandle); - if (ACPI_FAILURE(status)) { - /* This device is not ejectable */ - spin_unlock_irqrestore(ap->lock, flags); + if (ACPI_FAILURE(status)) + /* This device does not support hotplug */ return; - } - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status)) { - printk ("Unable to determine bay status\n"); - spin_unlock_irqrestore(ap->lock, flags); - return; - } + spin_lock_irqsave(ap->lock, flags); switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: ata_ehi_push_desc(ehi, "ACPI event"); - if (!sta) { - /* Device has been unplugged */ - if (dev) - dev->flags |= ATA_DFLAG_DETACH; - else { - struct ata_link *tlink; - struct ata_device *tdev; - - ata_port_for_each_link(tlink, ap) { - ata_link_for_each_dev(tdev, tlink) { - tdev->flags |= - ATA_DFLAG_DETACH; - } - } - } - ata_port_schedule_eh(ap); - wait = 1; - } else { + + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status)) { + ata_port_printk(ap, KERN_ERR, + "acpi: failed to determine bay status (0x%x)\n", + status); + break; + } + + if (sta) { ata_ehi_hotplugged(ehi); ata_port_freeze(ap); + } else { + /* The device has gone - unplug it */ + ata_acpi_detach_device(ap, dev); + wait = 1; } + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + if (!is_dock_event) + break; + + /* undock event - immediate unplug */ + ata_acpi_detach_device(ap, dev); + wait = 1; + break; } + /* make sure kobj doesn't go away while ap->lock is released */ + kobject_get(kobj); + spin_unlock_irqrestore(ap->lock, flags); - if (wait) + if (wait) { ata_port_wait_eh(ap); + ata_acpi_eject_device(handle); + } - if (dev) { - if (dev->sdev) - kobj = &dev->sdev->sdev_gendev.kobj; - } else - kobj = &ap->dev->kobj; - - if (kobj) { + if (kobj && !is_dock_event) { sprintf(event_string, "BAY_EVENT=%d", event); kobject_uevent_env(kobj, KOBJ_CHANGE, envp); } + + kobject_put(kobj); +} + +static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_device *dev = data; + + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1); +} + +static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_port *ap = data; + + ata_acpi_handle_hotplug(ap, NULL, event, 1); } static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) { struct ata_device *dev = data; - ata_acpi_handle_hotplug(NULL, dev, event); + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0); } static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) { struct ata_port *ap = data; - ata_acpi_handle_hotplug(ap, NULL, event); + ata_acpi_handle_hotplug(ap, NULL, event, 0); } /** @@ -252,7 +315,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_ap_notify, ap); /* we might be on a docking station */ register_hotplug_dock_device(ap->acpi_handle, - ata_acpi_ap_notify, ap); + ata_acpi_ap_notify_dock, ap); } for (j = 0; j < ata_link_max_devices(&ap->link); j++) { @@ -264,7 +327,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_dev_notify, dev); /* we might be on a docking station */ register_hotplug_dock_device(dev->acpi_handle, - ata_acpi_dev_notify, dev); + ata_acpi_dev_notify_dock, dev); } } } -- cgit v0.10.2 From e1fefea9cc4bc231b5c23fe19e3682fe061dc097 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 3 Jun 2008 18:59:02 +0200 Subject: [libata] ata_piix: more acer short cable quirks Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King Signed-off-by: maximilian attems Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3548ee7..81b7ae3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -574,6 +574,8 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } -- cgit v0.10.2 From ba069e376cc0801cd28352ca5986ce20413acb21 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sat, 31 May 2008 16:46:34 -0400 Subject: sata_mv: PHY_MODE4 cleanups The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index acf347f..60391e9 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -224,6 +224,11 @@ enum { PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, + PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ + PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ + PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ + PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ + PHY_MODE2 = 0x330, SATA_IFCTL_OFS = 0x344, SATA_TESTCTL_OFS = 0x348, @@ -2563,17 +2568,16 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - /* workaround for errata FEr SATA#10 (part 1) */ - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - /* enforce bit restrictions on GenIIe devices */ + u32 m4 = readl(port_mmio + PHY_MODE4); + /* + * Enforce reserved-bit restrictions on GenIIe devices only. + * For earlier chipsets, force only the internal config field + * (workaround for errata FEr SATA#10 part 1). + */ if (IS_GEN_IIE(hpriv)) - m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - + m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; + else + m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; writel(m4, port_mmio + PHY_MODE4); } /* -- cgit v0.10.2 From 4f0ebe3cc57f18ba26317b56b80b108c2848b1de Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:50 +0900 Subject: libata: kill unused constants Kill a few unused constants. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/include/linux/libata.h b/include/linux/libata.h index 4a92fba..93e2b89 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -111,13 +111,10 @@ enum { /* various global constants */ LIBATA_MAX_PRD = ATA_MAX_PRD / 2, LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */ - ATA_MAX_PORTS = 8, ATA_DEF_QUEUE = 1, /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, - ATA_MAX_BUS = 2, - ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, ATAPI_MAX_DRAIN = 16 << 10, -- cgit v0.10.2 From a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 May 2008 22:10:58 +0100 Subject: libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl - Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 3c2d228..90d20c6 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -247,7 +247,7 @@ u8 ata_sff_check_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -u8 ata_sff_altstatus(struct ata_port *ap) +static u8 ata_sff_altstatus(struct ata_port *ap) { if (ap->ops->sff_check_altstatus) return ap->ops->sff_check_altstatus(ap); @@ -256,6 +256,93 @@ u8 ata_sff_altstatus(struct ata_port *ap) } /** + * ata_sff_irq_status - Check if the device is busy + * @ap: port where the device is + * + * Determine if the port is currently busy. Uses altstatus + * if available in order to avoid clearing shared IRQ status + * when finding an IRQ source. Non ctl capable devices don't + * share interrupt lines fortunately for us. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_irq_status(struct ata_port *ap) +{ + u8 status; + + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + status = ata_sff_altstatus(ap); + /* Not us: We are busy */ + if (status & ATA_BUSY) + return status; + } + /* Clear INTRQ latch */ + status = ata_sff_check_status(ap); + return status; +} + +/** + * ata_sff_sync - Flush writes + * @ap: Port to wait for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_sff_sync(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + ap->ops->sff_check_altstatus(ap); + else if (ap->ioaddr.altstatus_addr) + ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_pause - Flush writes and wait 400nS + * @ap: Port to pause for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sff_pause(struct ata_port *ap) +{ + ata_sff_sync(ap); + ndelay(400); +} + +/** + * ata_sff_dma_pause - Pause before commencing DMA + * @ap: Port to pause for. + * + * Perform I/O fencing and ensure sufficient cycle delays occur + * for the HDMA1:0 transition + */ + +void ata_sff_dma_pause(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + /* An altstatus read will cause the needed delay without + messing up the IRQ status */ + ata_sff_altstatus(ap); + return; + } + /* There are no DMA controllers without ctl. BUG here to ensure + we never violate the HDMA1:0 transition timing and risk + corruption. */ + BUG(); +} + +/** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled * @tmout_pat: impatience timeout @@ -742,7 +829,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) } else ata_pio_sector(qc); - ata_sff_altstatus(qc->ap); /* flush */ + ata_sff_sync(qc->ap); /* flush */ } /** @@ -763,8 +850,9 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) WARN_ON(qc->dev->cdb_len < 12); ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_sff_altstatus(ap); /* flush */ - + ata_sff_sync(ap); + /* FIXME: If the CDB is for DMA do we need to do the transition delay + or is bmdma_start guaranteed to do it ? */ switch (qc->tf.protocol) { case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; @@ -905,7 +993,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (unlikely(__atapi_pio_bytes(qc, bytes))) goto err_out; - ata_sff_altstatus(ap); /* flush */ + ata_sff_sync(ap); /* flush */ return; @@ -1489,14 +1577,10 @@ inline unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* check altstatus */ - status = ata_sff_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - /* check main status, clearing INTRQ */ - status = ap->ops->sff_check_status(ap); - if (unlikely(status & ATA_BUSY)) + /* check main status, clearing INTRQ if needed */ + status = ata_sff_irq_status(ap); + if (status & ATA_BUSY) goto idle_irq; /* ack bmdma irq events */ @@ -2030,7 +2114,7 @@ void ata_sff_error_handler(struct ata_port *ap) ap->ops->bmdma_stop(qc); } - ata_sff_altstatus(ap); + ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); @@ -2203,7 +2287,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) mmio + ATA_DMA_CMD); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); } /** @@ -2722,7 +2806,8 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dev_select); EXPORT_SYMBOL_GPL(ata_sff_check_status); -EXPORT_SYMBOL_GPL(ata_sff_altstatus); +EXPORT_SYMBOL_GPL(ata_sff_dma_pause); +EXPORT_SYMBOL_GPL(ata_sff_pause); EXPORT_SYMBOL_GPL(ata_sff_busy_sleep); EXPORT_SYMBOL_GPL(ata_sff_wait_ready); EXPORT_SYMBOL_GPL(ata_sff_tf_load); diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 1713843..cf9e984 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) disable_dma(state->dma); /* see ata_bmdma_stop */ - ata_sff_altstatus(ap); + ata_sff_dma_pause(ap); } static u8 pata_icside_bmdma_status(struct ata_port *ap) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index a108d25..f8b3ffc 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -57,7 +57,9 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) struct ata_host *ah = ap->host; struct rb532_cf_info *info = ah->private_data; - ata_sff_altstatus(ap); + /* FIXME: Keep previous delay. If this is merely a fence then + ata_sff_sync might be sufficient. */ + ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index e965b25..bbf5aa3 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -726,7 +726,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); /* dummy read */ } /** @@ -747,7 +747,8 @@ static u8 scc_bmdma_status (struct ata_port *ap) return host_stat; /* errata A252,A308 workaround: Step4 */ - if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + if ((scc_check_altstatus(ap) & ATA_ERR) + && (int_status & INTSTS_INTRQ)) return (host_stat | ATA_DMA_INTR); /* errata A308 workaround Step5 */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 93e2b89..e57e5d0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1432,7 +1432,8 @@ extern void ata_sff_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_sff_check_status(struct ata_port *ap); -extern u8 ata_sff_altstatus(struct ata_port *ap); +extern void ata_sff_pause(struct ata_port *ap); +extern void ata_sff_dma_pause(struct ata_port *ap); extern int ata_sff_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline); @@ -1493,19 +1494,6 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, #endif /* CONFIG_PCI */ /** - * ata_sff_pause - Flush writes and pause 400 nanoseconds. - * @ap: Port to wait for. - * - * LOCKING: - * Inherited from caller. - */ -static inline void ata_sff_pause(struct ata_port *ap) -{ - ata_sff_altstatus(ap); - ndelay(400); -} - -/** * ata_sff_busy_wait - Wait for a port status register * @ap: Port to wait for. * @bits: bits that must be clear -- cgit v0.10.2 From fb3bbd6a663fe972611676381adc4c60ddfe61ac Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 22 May 2008 18:22:30 -0700 Subject: x86: fix APIC warning on 32bit v2 for http://bugzilla.kernel.org/show_bug.cgi?id=10613 BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) v2: fix 64 bit compilation Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Rafael J. Wysocki" Cc: Gabriel C Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc..33c5216 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -242,12 +242,19 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) static void __cpuinit acpi_register_lapic(int id, u8 enabled) { + unsigned int ver = 0; + if (!enabled) { ++disabled_cpus; return; } - generic_processor_info(id, 0); +#ifdef CONFIG_X86_32 + if (boot_cpu_physical_apicid != -1U) + ver = apic_version[boot_cpu_physical_apicid]; +#endif + + generic_processor_info(id, ver); } static int __init @@ -767,8 +774,13 @@ static void __init acpi_register_lapic_address(unsigned long address) mp_lapic_addr = address; set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) + if (boot_cpu_physical_apicid == -1U) { boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); +#ifdef CONFIG_X86_32 + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); +#endif + } } static int __init early_acpi_parse_madt_lapic_addr_ovr(void) -- cgit v0.10.2 From deef325086c3897393b8f7d6bccd03405244fe18 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 15:44:38 +0200 Subject: x86: disable preemption in native_smp_prepare_cpus Priit Laes reported the following warning: Call Trace: [] warn_on_slowpath+0x51/0x63 [] sys_ioctl+0x2d/0x5d [] _spin_lock+0xe/0x24 [] task_rq_lock+0x3d/0x73 [] set_cpu_sibling_map+0x336/0x350 [] read_apic_id+0x30/0x62 [] verify_local_APIC+0x90/0x138 [] native_smp_prepare_cpus+0x1f9/0x305 [] kernel_init+0x59/0x2d9 [] _spin_unlock_irq+0x11/0x2b [] child_rip+0xa/0x12 [] kernel_init+0x0/0x2d9 [] child_rip+0x0/0x12 fix this by generally disabling preemption in native_smp_prepare_cpus(). Reported-and-bisected-by: Priit Laes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3898849..56078d6 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1190,6 +1190,7 @@ static void __init smp_cpu_index_default(void) */ void __init native_smp_prepare_cpus(unsigned int max_cpus) { + preempt_disable(); nmi_watchdog_default(); smp_cpu_index_default(); current_cpu_data = boot_cpu_data; @@ -1206,7 +1207,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); - return; + goto out; } preempt_disable(); @@ -1246,6 +1247,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) printk(KERN_INFO "CPU%d: ", 0); print_cpu_info(&cpu_data(0)); setup_boot_clock(); +out: + preempt_enable(); } /* * Early setup to make printk work. -- cgit v0.10.2 From 5c1ea08215f1f830dfaf4819a5f22efca41c3832 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sun, 25 May 2008 11:13:32 -0400 Subject: x86: enable preemption in delay The RT team has been searching for a nasty latency. This latency shows up out of the blue and has been seen to be as big as 5ms! Using ftrace I found the cause of the latency. pcscd-2995 3dNh1 52360300us : irq_exit (smp_apic_timer_interrupt) pcscd-2995 3dN.2 52360301us : idle_cpu (irq_exit) pcscd-2995 3dN.2 52360301us : rcu_irq_exit (irq_exit) pcscd-2995 3dN.1 52360771us : smp_apic_timer_interrupt (apic_timer_interrupt ) pcscd-2995 3dN.1 52360771us : exit_idle (smp_apic_timer_interrupt) Here's an example of a 400 us latency. pcscd took a timer interrupt and returned with "need resched" enabled, but did not reschedule until after the next interrupt came in at 52360771us 400us later! At first I thought we somehow missed a preemption check in entry.S. But I also noticed that this always seemed to happen during a __delay call. pcscd-2995 3dN.2 52360836us : rcu_irq_exit (irq_exit) pcscd-2995 3.N.. 52361265us : preempt_schedule (__delay) Looking at the x86 delay, I found my problem. In git commit 35d5d08a085c56f153458c3f5d8ce24123617faf, Andrew Morton placed preempt_disable around the entire delay due to TSC's not working nicely on SMP. Unfortunately for those that care about latencies this is devastating! Especially when we have callers to mdelay(8). Here I enable preemption during the loop and account for anytime the task migrates to a new CPU. The delay asked for may be extended a bit by the migration, but delay only guarantees that it will delay for that minimum time. Delaying longer should not be an issue. [ Thanks to Thomas Gleixner for spotting that cpu wasn't updated, and to place the rep_nop between preempt_enabled/disable. ] Signed-off-by: Steven Rostedt Cc: akpm@osdl.org Cc: Clark Williams Cc: Peter Zijlstra Cc: "Luis Claudio R. Goncalves" Cc: Gregory Haskins Cc: Linus Torvalds Cc: Andi Kleen Signed-off-by: Thomas Gleixner diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c index 4535e6d..d710f2d 100644 --- a/arch/x86/lib/delay_32.c +++ b/arch/x86/lib/delay_32.c @@ -44,13 +44,36 @@ static void delay_loop(unsigned long loops) static void delay_tsc(unsigned long loops) { unsigned long bclock, now; + int cpu; - preempt_disable(); /* TSC's are per-cpu */ + preempt_disable(); + cpu = smp_processor_id(); rdtscl(bclock); - do { - rep_nop(); + for (;;) { rdtscl(now); - } while ((now-bclock) < loops); + if ((now - bclock) >= loops) + break; + + /* Allow RT tasks to run */ + preempt_enable(); + rep_nop(); + preempt_disable(); + + /* + * It is possible that we moved to another CPU, and + * since TSC's are per-cpu we need to calculate + * that. The delay must guarantee that we wait "at + * least" the amount of time. Being moved to another + * CPU could make the wait longer but we just need to + * make sure we waited long enough. Rebalance the + * counter for this CPU. + */ + if (unlikely(cpu != smp_processor_id())) { + loops -= (now - bclock); + cpu = smp_processor_id(); + rdtscl(bclock); + } + } preempt_enable(); } diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c index bbc6105..4c441be 100644 --- a/arch/x86/lib/delay_64.c +++ b/arch/x86/lib/delay_64.c @@ -31,14 +31,36 @@ int __devinit read_current_timer(unsigned long *timer_value) void __delay(unsigned long loops) { unsigned bclock, now; + int cpu; - preempt_disable(); /* TSC's are pre-cpu */ + preempt_disable(); + cpu = smp_processor_id(); rdtscl(bclock); - do { - rep_nop(); + for (;;) { rdtscl(now); + if ((now - bclock) >= loops) + break; + + /* Allow RT tasks to run */ + preempt_enable(); + rep_nop(); + preempt_disable(); + + /* + * It is possible that we moved to another CPU, and + * since TSC's are per-cpu we need to calculate + * that. The delay must guarantee that we wait "at + * least" the amount of time. Being moved to another + * CPU could make the wait longer but we just need to + * make sure we waited long enough. Rebalance the + * counter for this CPU. + */ + if (unlikely(cpu != smp_processor_id())) { + loops -= (now - bclock); + cpu = smp_processor_id(); + rdtscl(bclock); + } } - while ((now-bclock) < loops); preempt_enable(); } EXPORT_SYMBOL(__delay); -- cgit v0.10.2 From e8a496ac8cd00cabbdaa373db4818a9ad19a1c5a Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 23 May 2008 16:26:37 -0700 Subject: x86: fix broken math-emu with lazy allocation of fpu area Fix the math emulation that got broken with the recent lazy allocation of FPU area. init_fpu() need to be added for the math-emulation path aswell for the FPU area allocation. math emulation enabled kernel booted fine with this, in the presence of "no387 nofxsr" boot param. Signed-off-by: Suresh Siddha Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e03cc95..eb9ddd8 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -56,6 +56,11 @@ void __cpuinit mxcsr_feature_mask_init(void) void __init init_thread_xstate(void) { + if (!HAVE_HWFP) { + xstate_size = sizeof(struct i387_soft_struct); + return; + } + if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -94,7 +99,7 @@ void __cpuinit fpu_init(void) int init_fpu(struct task_struct *tsk) { if (tsk_used_math(tsk)) { - if (tsk == current) + if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); return 0; } @@ -109,6 +114,15 @@ int init_fpu(struct task_struct *tsk) return -ENOMEM; } +#ifdef CONFIG_X86_32 + if (!HAVE_HWFP) { + memset(tsk->thread.xstate, 0, xstate_size); + finit(); + set_stopped_child_used_math(tsk); + return 0; + } +#endif + if (cpu_has_fxsr) { struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave; @@ -330,13 +344,13 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; + if (!HAVE_HWFP) + return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, @@ -360,15 +374,15 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; set_stopped_child_used_math(target); + if (!HAVE_HWFP) + return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, -1); @@ -474,18 +488,18 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) int restore_i387_ia32(struct _fpstate_ia32 __user *buf) { int err; + struct task_struct *tsk = current; - if (HAVE_HWFP) { - struct task_struct *tsk = current; - + if (HAVE_HWFP) clear_fpu(tsk); - if (!used_math()) { - err = init_fpu(tsk); - if (err) - return err; - } + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + if (HAVE_HWFP) { if (cpu_has_fxsr) err = restore_i387_fxsave(buf); else diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c index 6e38d87..c7b06fe 100644 --- a/arch/x86/math-emu/fpu_entry.c +++ b/arch/x86/math-emu/fpu_entry.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "fpu_system.h" #include "fpu_emu.h" @@ -146,6 +147,13 @@ asmlinkage void math_emulate(long arg) unsigned long code_limit = 0; /* Initialized to stop compiler warnings */ struct desc_struct code_descriptor; + if (!used_math()) { + if (init_fpu(current)) { + do_group_exit(SIGKILL); + return; + } + } + #ifdef RE_ENTRANT_CHECKING if (emulating) { printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n"); @@ -153,11 +161,6 @@ asmlinkage void math_emulate(long arg) RE_ENTRANT_CHECK_ON; #endif /* RE_ENTRANT_CHECKING */ - if (!used_math()) { - finit(); - set_used_math(); - } - SETUP_DATA_AREA(arg); FPU_ORIG_EIP = FPU_EIP; diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 6b722d3..37672f7 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -193,6 +193,8 @@ static inline int restore_i387(struct _fpstate __user *buf) #else /* CONFIG_X86_32 */ +extern void finit(void); + static inline void tolerant_fwait(void) { asm volatile("fnclex ; fwait"); -- cgit v0.10.2 From 226e9a93a253b7d8811b5ed9ac671c6c5a728022 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 27 May 2008 09:56:49 +0200 Subject: x86: ioremap fix failing nesting check Mika Kukkonen noticed that the nesting check in early_iounmap() is not actually done. Reported-by: Mika Kukkonen Signed-off-by: Ingo Molnar Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Cc: mikukkon@iki.fi Signed-off-by: Thomas Gleixner diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 71bb315..2b2bb3f 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -593,10 +593,11 @@ void __init early_iounmap(void *addr, unsigned long size) unsigned long offset; unsigned int nrpages; enum fixed_addresses idx; - unsigned int nesting; + int nesting; nesting = --early_ioremap_nested; - WARN_ON(nesting < 0); + if (WARN_ON(nesting < 0)) + return; if (early_ioremap_debug) { printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr, -- cgit v0.10.2 From 2884f110d5409714f3a04eeb6d2ecd77da66b242 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 28 May 2008 19:36:07 +0100 Subject: x86: fix bad pmd ffff810000207xxx(9090909090909090) OGAWA Hirofumi and Fede have reported rare pmd_ERROR messages: mm/memory.c:127: bad pmd ffff810000207xxx(9090909090909090). Initialization's cleanup_highmap was leaving alignment filler behind in the pmd for MODULES_VADDR: when vmalloc's guard page would occupy a new page table, it's not allocated, and then module unload's vfree hits the bad 9090 pmd entry left over. Signed-off-by: Hugh Dickins Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b..998a06e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -206,7 +206,7 @@ void __init cleanup_highmap(void) pmd_t *last_pmd = pmd + PTRS_PER_PMD; for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) { - if (!pmd_present(*pmd)) + if (pmd_none(*pmd)) continue; if (vaddr < (unsigned long) _text || vaddr > end) set_pmd(pmd, __pmd(0)); -- cgit v0.10.2 From 511631011d39706ac81ee5e4c9084d61e5b4fd34 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Thu, 29 May 2008 21:14:35 -0300 Subject: x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: Kevin Winchester Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 998a06e..156e6d7 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - unsigned long t_start, t_size; + u64 t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016lx - %016lx pattern %d", + printk(KERN_CONT "\n %016llx - %016llx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 282c454cd3a7041f59a37112bb2f82263bc38f6c Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Thu, 29 May 2008 12:01:44 -0700 Subject: x86: fix Xorg crash with xf86MapVidMem error Clarify the usage of mtrr_lookup() in PAT code, and to make PAT code resilient to mtrr lookup problems. Specifically, pat_x_mtrr_type() is restructured to highlight, under what conditions we look for mtrr hint. pat_x_mtrr_type() uses a default type when there are any errors in mtrr lookup (still maintaining the pat consistency). And, reserve_memtype() highlights its usage ot mtrr_lookup for request type of '-1' and also defaults in a sane way on any mtrr lookup failure. pat.c looks at mtrr type of a range to get a hint on what mapping type to request when user/API: (1) hasn't specified any type (/dev/mem mapping) and we do not want to take performance hit by always mapping UC_MINUS. This will be the case for /dev/mem mappings used to map BIOS area or ACPI region which are WB'able. In this case, as long as MTRR is not WB, PAT will request UC_MINUS for such mappings. (2) user/API requests WB mapping while in reality MTRR may have UC or WC. In this case, PAT can map as WB (without checking MTRR) and still effective type will be UC or WC. But, a subsequent request to map same region as UC or WC may fail, as the region will get trackked as WB in PAT list. Looking at MTRR hint helps us to track based on effective type rather than what user requested. Again, here mtrr_lookup is only used as hint and we fallback to WB mapping (as requested by user) as default. In both cases, after using the mtrr hint, we still go through the memtype list to make sure there are no inconsistencies among multiple users. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Tested-by: Rufus & Azrael Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index de3a998..183fdd3 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -151,32 +151,33 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, unsigned long pat_type; u8 mtrr_type; - mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == 0xFF) { /* MTRR not enabled */ - *ret_prot = prot; - return 0; - } - if (mtrr_type == 0xFE) { /* MTRR match error */ - *ret_prot = _PAGE_CACHE_UC; - return -1; - } - if (mtrr_type != MTRR_TYPE_UNCACHABLE && - mtrr_type != MTRR_TYPE_WRBACK && - mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */ - *ret_prot = _PAGE_CACHE_UC; - return -1; - } - pat_type = prot & _PAGE_CACHE_MASK; prot &= (~_PAGE_CACHE_MASK); - /* Currently doing intersection by hand. Optimize it later. */ + /* + * We return the PAT request directly for types where PAT takes + * precedence with respect to MTRR and for UC_MINUS. + * Consistency checks with other PAT requests is done later + * while going through memtype list. + */ if (pat_type == _PAGE_CACHE_WC) { *ret_prot = prot | _PAGE_CACHE_WC; + return 0; } else if (pat_type == _PAGE_CACHE_UC_MINUS) { *ret_prot = prot | _PAGE_CACHE_UC_MINUS; - } else if (pat_type == _PAGE_CACHE_UC || - mtrr_type == MTRR_TYPE_UNCACHABLE) { + return 0; + } else if (pat_type == _PAGE_CACHE_UC) { + *ret_prot = prot | _PAGE_CACHE_UC; + return 0; + } + + /* + * Look for MTRR hint to get the effective type in case where PAT + * request is for WB. + */ + mtrr_type = mtrr_type_lookup(start, end); + + if (mtrr_type == MTRR_TYPE_UNCACHABLE) { *ret_prot = prot | _PAGE_CACHE_UC; } else if (mtrr_type == MTRR_TYPE_WRCOMB) { *ret_prot = prot | _PAGE_CACHE_WC; @@ -233,14 +234,12 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (req_type == -1) { /* - * Special case where caller wants to inherit from mtrr or - * existing pat mapping, defaulting to UC_MINUS in case of - * no match. + * Call mtrr_lookup to get the type hint. This is an + * optimization for /dev/mem mmap'ers into WB memory (BIOS + * tools and ACPI tools). Use WB request for WB memory and use + * UC_MINUS otherwise. */ u8 mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == 0xFE) { /* MTRR match error */ - err = -1; - } if (mtrr_type == MTRR_TYPE_WRBACK) { req_type = _PAGE_CACHE_WB; -- cgit v0.10.2 From be524fb96081e9e511d993ebf39b05a32b19476e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 May 2008 00:01:28 -0700 Subject: x86: section mismatch fix Fix this: WARNING: vmlinux.o(.text+0x114bb): Section mismatch in reference from the function nopat() to the function .cpuinit.text:pat_disable() The function nopat() references the function __cpuinit pat_disable(). This is often because nopat lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Reported-by: "Fabio Comolli" Cc: Sam Ravnborg Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 183fdd3..06b7a1c 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -34,7 +34,7 @@ void __cpuinit pat_disable(char *reason) printk(KERN_INFO "%s\n", reason); } -static int nopat(char *str) +static int __init nopat(char *str) { pat_disable("PAT support disabled."); return 0; -- cgit v0.10.2 From cd76374e9de4501acc74f833dc6cb5e7a5dca115 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 29 May 2008 00:30:21 -0700 Subject: suspend-vs-iommu: prevent suspend if we could not resume iommu/gart support misses suspend/resume code, which can do bad stuff, including memory corruption on resume. Prevent system suspend in case we would be unable to resume. Signed-off-by: Pavel Machek Tested-by: Patrick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d..aa8ec92 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -548,6 +549,28 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static int gart_resume(struct sys_device *dev) +{ + return 0; +} + +static int gart_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class gart_sysdev_class = { + .name = "gart", + .suspend = gart_suspend, + .resume = gart_resume, + +}; + +static struct sys_device device_gart = { + .id = 0, + .cls = &gart_sysdev_class, +}; + /* * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. @@ -558,7 +581,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) unsigned aper_base, new_aper_base; struct pci_dev *dev; void *gatt; - int i; + int i, error; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -606,6 +629,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info) pci_write_config_dword(dev, 0x90, ctl); } + + error = sysdev_class_register(&gart_sysdev_class); + if (!error) + error = sysdev_register(&device_gart); + if (error) + panic("Could not register gart_sysdev -- would corrupt data on next suspend"); flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", -- cgit v0.10.2 From 870568b39064cab2dd971fe57969916036982862 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 2 Jun 2008 15:57:27 -0700 Subject: x86, fpu: fix CONFIG_PREEMPT=y corruption of application's FPU stack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Jürgen Mell reported an FPU state corruption bug under CONFIG_PREEMPT, and bisected it to commit v2.6.19-1363-gacc2076, "i386: add sleazy FPU optimization". Add tsk_used_math() checks to prevent calling math_state_restore() which can sleep in the case of !tsk_used_math(). This prevents making a blocking call in __switch_to(). Apparently "fpu_counter > 5" check is not enough, as in some signal handling and fork/exec scenarios, fpu_counter > 5 and !tsk_used_math() is possible. It's a side effect though. This is the failing scenario: process 'A' in save_i387_ia32() just after clear_used_math() Got an interrupt and pre-empted out. At the next context switch to process 'A' again, kernel tries to restore the math state proactively and sees a fpu_counter > 0 and !tsk_used_math() This results in init_fpu() during the __switch_to()'s math_state_restore() And resulting in fpu corruption which will be saved/restored (save_i387_fxsave and restore_i387_fxsave) during the remaining part of the signal handling after the context switch. Bisected-by: Jürgen Mell Signed-off-by: Suresh Siddha Tested-by: Jürgen Mell Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index f8476df..6d54833 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -649,8 +649,11 @@ struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter > 5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index e2319f3..ac54ff5 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -658,8 +658,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter>5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); return prev_p; } -- cgit v0.10.2 From a064d5bdd0c9602e4cd930ad949392640b37dda7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: ibmaem endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 5c006c9..c9416e6 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -189,8 +189,8 @@ static struct aem_iana_id system_x_id = { struct aem_find_firmware_req { struct aem_iana_id id; u8 rsvd; - u16 index; - u16 module_type_id; + __be16 index; + __be16 module_type_id; } __packed; struct aem_find_firmware_resp { @@ -202,7 +202,7 @@ struct aem_find_firmware_resp { struct aem_find_instance_req { struct aem_iana_id id; u8 instance_number; - u16 module_type_id; + __be16 module_type_id; } __packed; struct aem_find_instance_resp { @@ -444,17 +444,17 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, } case 2: { u16 *x = buf; - *x = be16_to_cpup((u16 *)rs_resp->bytes); + *x = be16_to_cpup((__be16 *)rs_resp->bytes); break; } case 4: { u32 *x = buf; - *x = be32_to_cpup((u32 *)rs_resp->bytes); + *x = be32_to_cpup((__be32 *)rs_resp->bytes); break; } case 8: { u64 *x = buf; - *x = be64_to_cpup((u64 *)rs_resp->bytes); + *x = be64_to_cpup((__be64 *)rs_resp->bytes); break; } } -- cgit v0.10.2 From 76e6f2526ff69eba466f583d94beb7cf6b0bddd6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: usb/c67x00 endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c index 5100fbb..a9636f4 100644 --- a/drivers/usb/c67x00/c67x00-ll-hpi.c +++ b/drivers/usb/c67x00/c67x00-ll-hpi.c @@ -120,7 +120,7 @@ static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value) * Only data is little endian, addr has cpu endianess */ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -129,7 +129,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++)); + hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -138,7 +138,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, * Only data is little endian, addr has cpu endianess */ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -146,7 +146,7 @@ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, spin_lock_irqsave(&dev->hpi.lock, flags); hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA)); + *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -425,7 +425,7 @@ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; @@ -456,7 +456,7 @@ void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; -- cgit v0.10.2 From fa4144b758d58341d4e082ac2af259e97fbcbeee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: cdc-wdm endianness fixes * wMaxPacketSize is le16; copying it to a field of local structure and then using that field as host-endian (size of object to be allocated) is broken. * bMaxPacketSize0 is 8-bit; feeding it to le16_to_cpu() is bogus and since the result is used as host-endian, it's not even misspelled cpu_to_le16(). Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 107666d..731db05 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -611,8 +611,8 @@ next_desc: goto err; } - desc->wMaxPacketSize = ep->wMaxPacketSize; - desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0); + desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); + desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); if (!desc->orq) -- cgit v0.10.2 From 6399e7acbf9193c7d48827329ca592a1c8dc9e69 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: isp1760-if iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 440bf94..c9db3fe 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -104,8 +104,8 @@ static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; static u32 length; -static u8 *chip_addr; -static u8 *iobase; +static u8 __iomem *chip_addr; +static u8 __iomem *iobase; static int __devinit isp1761_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) -- cgit v0.10.2 From 1d92cfd54a51ff1b9593019fdde56793b66ba6a9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: cifs endianness fixes __le16 fields used as host-endian. Signed-off-by: Al Viro Acked-by: Steve French Signed-off-by: Linus Torvalds diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9b8b4cf..fb655b4 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3927,9 +3927,9 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, } ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals); - if (ref->VersionNumber != 3) { + if (ref->VersionNumber != cpu_to_le16(3)) { cERROR(1, ("Referrals of V%d version are not supported," - "should be V3", ref->VersionNumber)); + "should be V3", le16_to_cpu(ref->VersionNumber))); rc = -EINVAL; goto parse_DFS_referrals_exit; } @@ -3977,7 +3977,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, if (rc) goto parse_DFS_referrals_exit; - ref += ref->Size; + ref += le16_to_cpu(ref->Size); } parse_DFS_referrals_exit: -- cgit v0.10.2 From 1a79d1c37178935a3092f73c8832933e9fed1f66 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e..b5c1e66 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v0.10.2 From 9307245765108a7ec827ef936560f333447c45ef Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: mpc52xx_gpio iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c index 48da5df..8a455eb 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -100,7 +100,7 @@ static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -122,7 +122,7 @@ static int mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); unsigned long flags; @@ -150,7 +150,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev, const struct of_device_id *match) { struct mpc52xx_gpiochip *chip; - struct mpc52xx_gpio_wkup *regs; + struct mpc52xx_gpio_wkup __iomem *regs; struct of_gpio_chip *ofchip; int ret; @@ -260,7 +260,7 @@ static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio *regs = mm_gc->regs; + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -284,7 +284,7 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio *regs = mm_gc->regs; + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -312,7 +312,7 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev, { struct mpc52xx_gpiochip *chip; struct of_gpio_chip *ofchip; - struct mpc52xx_gpio *regs; + struct mpc52xx_gpio __iomem *regs; int ret; chip = kzalloc(sizeof(*chip), GFP_KERNEL); @@ -387,7 +387,7 @@ mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpt *regs = mm_gc->regs; + struct mpc52xx_gpt __iomem *regs = mm_gc->regs; out_be32(®s->mode, 0x04); -- cgit v0.10.2 From c409d52bd1f16b37d35a50162cbf6401011f1135 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: celleb_scc_pciex endianness misannotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index 31da84c..0e04f8f 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -217,7 +217,7 @@ static u##size scc_pciex_in##name(unsigned long port) \ static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \ { \ struct iowa_bus *bus = iowa_pio_find_bus(p); \ - u##size *dst = b; \ + __le##size *dst = b; \ for (; c != 0; c--, dst++) \ *dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \ scc_pciex_io_flush(bus); \ @@ -231,10 +231,11 @@ static void scc_pciex_outs##name(unsigned long p, const void *b, \ unsigned long c) \ { \ struct iowa_bus *bus = iowa_pio_find_bus(p); \ - const u##size *src = b; \ + const __le##size *src = b; \ for (; c != 0; c--, src++) \ __scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \ } +#define __le8 u8 #define cpu_to_le8(x) (x) #define le8_to_cpu(x) (x) PCIEX_PIO_FUNC(8, b) -- cgit v0.10.2 From d430a227d272fa514bade388bf511dba4ec2962a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: bogus format in ip6mr ptrdiff_t is %t..., not %Z... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 2de3c46..1479618 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -197,7 +197,7 @@ static int ip6mr_vif_seq_show(struct seq_file *seq, void *v) const char *name = vif->dev ? vif->dev->name : "none"; seq_printf(seq, - "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n", + "%2td %-10s %8ld %7ld %8ld %7ld %05X\n", vif - vif6_table, name, vif->bytes_in, vif->pkt_in, vif->bytes_out, vif->pkt_out, -- cgit v0.10.2 From e97dcb0eadbb821eccd549d4987b653cf61e2374 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Mon, 2 Jun 2008 10:04:32 -0700 Subject: Smack: fuse mount hang fix The d_instantiate hook for Smack can hang on the root inode of a filesystem if the file system code has not really done all the set-up. Fuse is known to encounter this problem. This change detects an attempt to instantiate a root inode and addresses it early in the processing, before any attempt is made to do something that might hang. Signed-off-by: Casey Schaufler Tested-by: Luiz Fernando N. Capitulino Signed-off-by: Linus Torvalds diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index b5c8f92..4a09293 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1881,6 +1881,18 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode) final = sbsp->smk_default; /* + * If this is the root inode the superblock + * may be in the process of initialization. + * If that is the case use the root value out + * of the superblock. + */ + if (opt_dentry->d_parent == opt_dentry) { + isp->smk_inode = sbsp->smk_root; + isp->smk_flags |= SMK_INODE_INSTANT; + goto unlockandout; + } + + /* * This is pretty hackish. * Casey says that we shouldn't have to do * file system specific code, but it does help -- cgit v0.10.2 From 9b62d864314736fb6cc5c5db5b964d4a3c093424 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 21 May 2008 17:26:15 +0800 Subject: [MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume path Signed-off-by: Eric Miao Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index fceb468..fe2bc7e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1216,7 +1216,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) clk_enable(info->clk); - return pxa3xx_nand_config_flash(info); + return pxa3xx_nand_config_flash(info, info->flash_info); } #else #define pxa3xx_nand_suspend NULL -- cgit v0.10.2 From edeb280e49d38a5330db25463ef45f5466b0058a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jun 2008 10:35:03 -0700 Subject: Fix uart_set_ldisc() function type Commit 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 ("serial_core: uart_set_ldisc infrastructure") introduced the ability for low-level serial drivers to be informed when the tty ldisc changes. However, the actual tty-layer function that does this callback for serial devices was declared with the wrong type, having a spurious and unused 'ldisc' argument. This fixed the resulting compiler warning by just removing it. Acked-by: Blithering Idiot Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 951a75e..c9b64e7 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,7 +1165,7 @@ out: return ret; } -static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +static void uart_set_ldisc(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->port; -- cgit v0.10.2 From 53c8ba95402be65d412a806cda3430f0e72cd107 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jun 2008 20:10:44 -0700 Subject: Linux 2.6.26-rc5 diff --git a/Makefile b/Makefile index 8db70fe..2b95120 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION* -- cgit v0.10.2 From ba75321193900a236bc5bbc29145e1039f74eb1b Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Wed, 7 May 2008 11:54:10 +0900 Subject: [MTD] [MAPS] Fix cmdlineparse handling in mapping files Now it returns the 0 if cmdlineparse not supplied. Signed-off-by: Kyungmin Park Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index 240b0e2..c12d805 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -110,7 +110,7 @@ static int __init omapflash_probe(struct platform_device *pdev) err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); else #endif diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 3d44d04..ad81ab8 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -76,7 +76,7 @@ static int __devinit generic_onenand_probe(struct device *dev) err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(&info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); else #endif -- cgit v0.10.2 From daf20d95bff81c6fc8a8d8160e620e1f9581af02 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 May 2008 11:21:58 -0300 Subject: V4L/DVB (7885): ivtv/cx18: add compat_ioctl entries Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 4ca9d84..dee6cc9 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -36,12 +36,13 @@ #define CX18_DSP0_INTERRUPT_MASK 0xd0004C static struct file_operations cx18_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = cx18_v4l2_read, - .open = cx18_v4l2_open, - .ioctl = cx18_v4l2_ioctl, - .release = cx18_v4l2_close, - .poll = cx18_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = cx18_v4l2_read, + .open = cx18_v4l2_open, + .ioctl = cx18_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = cx18_v4l2_close, + .poll = cx18_v4l2_enc_poll, }; /* offset from 0 to register ts v4l2 minors on */ diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index c47c2b9..c854285 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -44,23 +44,25 @@ #include "ivtv-streams.h" static const struct file_operations ivtv_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, }; static const struct file_operations ivtv_v4l2_dec_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_dec_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_dec_poll, }; #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ -- cgit v0.10.2 From 81b8021a71c194752e8bbb29328cecc744a47b2b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 23:14:04 -0300 Subject: V4L/DVB (7901): zoran: use correct type for CPU flags locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch will cause drivers/media/video/zoran_driver.c: In function 'zoran_close_end_session': drivers/media/video/zoran_driver.c:1172: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 345c77e..b75313d 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -1167,7 +1167,7 @@ zoran_close_end_session (struct file *file) /* v4l capture */ if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -3436,7 +3436,7 @@ zoran_do_ioctl (struct inode *inode, /* unload capture */ if (zr->v4l_memgrab_active) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -4375,7 +4375,7 @@ zoran_vm_close (struct vm_area_struct *vma) mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); -- cgit v0.10.2 From 4277106b4fb6edd8f52b0653841faebbf7160480 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:51:07 -0300 Subject: V4L/DVB (7902): fix handling of tea5761_autodetection return value tea5761_autodetection returns -EINVAL on error Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c index b93cdef..b23dade 100644 --- a/drivers/media/common/tuners/tea5761.c +++ b/drivers/media/common/tuners/tea5761.c @@ -295,7 +295,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, { struct tea5761_priv *priv = NULL; - if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL) + if (tea5761_autodetection(i2c_adap, i2c_addr) != 0) return NULL; priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL); -- cgit v0.10.2 From 7fa7b8583f14889aaceebcd8dca3093987e289f7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:53:39 -0300 Subject: V4L/DVB (7903): gp8psk_power_ctrl should return negative errors Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c index 9a942af..2653120 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; -- cgit v0.10.2 From 4d3437df25325d517ee310d55989ce9630ff529e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 26 May 2008 14:03:02 -0300 Subject: V4L/DVB (7904): v4l/tuner-core: consistent handling of return values change check_mode and set_mode to return negative errors and fix all callers Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index a0f7bc1..1a91174 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -536,7 +536,7 @@ static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) static inline int check_mode(struct tuner *t, char *cmd) { if ((1 << t->mode & t->mode_mask) == 0) { - return EINVAL; + return -EINVAL; } switch (t->mode) { @@ -730,11 +730,11 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, t->mode = mode; - if (check_mode(t, cmd) == EINVAL) { + if (check_mode(t, cmd) == -EINVAL) { t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); - return EINVAL; + return -EINVAL; } return 0; } @@ -776,13 +776,13 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case AUDC_SET_RADIO: if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") - == EINVAL) + == -EINVAL) return 0; if (t->radio_freq) set_freq(client, t->radio_freq); break; case TUNER_SET_STANDBY: - if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) + if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL) return 0; t->mode = T_STANDBY; if (analog_ops->standby) @@ -790,7 +790,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; #ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCSAUDIO: - if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -813,7 +813,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_v4l2(t) == EINVAL) return 0; - if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) + if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) return 0; if (vc->norm < ARRAY_SIZE(map)) @@ -827,7 +827,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { unsigned long *v = arg; - if (check_mode(t, "VIDIOCSFREQ") == EINVAL) + if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -839,7 +839,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_tuner *vt = arg; - if (check_mode(t, "VIDIOCGTUNER") == EINVAL) + if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -883,7 +883,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -925,7 +925,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l2_std_id *id = arg; if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); @@ -941,7 +941,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); set_freq(client,f->frequency); @@ -952,7 +952,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) + if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL) return 0; switch_v4l2(); f->type = t->mode; @@ -973,7 +973,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -1020,7 +1020,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL) return 0; switch_v4l2(); -- cgit v0.10.2 From 427aad6fda607914945022e916827037d2d0db3d Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:58:59 -0300 Subject: V4L/DVB (7905): check_v4l2 should return -EINVAL on error check_v4l2 always returns 0, so this change is an noop for now, but a comment says it will return something else in the future Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1a91174..0d12ace 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -792,7 +792,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOCSAUDIO: if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; /* Should be implemented, since bttv calls it */ @@ -810,7 +810,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) }; struct video_channel *vc = arg; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) @@ -829,7 +829,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; set_freq(client, *v); @@ -841,7 +841,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -885,7 +885,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { -- cgit v0.10.2 From 38db143e6feaa2dc649ed8bf69d1a12f7b9c0246 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 16 May 2008 00:15:53 -0300 Subject: V4L/DVB (7906): tuners/mxl5005s.c: don't define variables for enums It doesn't seem to be intended that "tuner_modu_type" and "MXL5005_ControlName" were global variables. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 5d05b53..0dc2bef 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -101,7 +101,7 @@ enum { MXL_QAM, MXL_ANALOG_CABLE, MXL_ANALOG_OTA -} tuner_modu_type; +}; /* MXL5005 Tuner Register Struct */ struct TunerReg { @@ -194,7 +194,7 @@ enum { RFSYN_DIVM, /* 88 */ DN_BYPASS_AGC_I2C /* 89 */ #endif -} MXL5005_ControlName; +}; /* * The following context is source code provided by MaxLinear. -- cgit v0.10.2 From 45033bcf172d9965210b644f3769c9de94c33333 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 26 May 2008 14:23:49 -0300 Subject: V4L/DVB (7908): always enter drivers/media/video/ After commit 039d40019f3c5e26ea50ec5af4270189f63365e1 (V4L/DVB (7898): Fix VIDEO_MEDIA Kconfig logic) VIDEO_MEDIA is no longer usable in Makefile's for deciding which directories we enter, resulting in compile errors like the following with CONFIG_VIDEO_DEV=y, CONFIG_DVB_CORE=m: <-- snip --> ... MODPOST 187 modules ... make[2]: *** [__modpost] Error 1 <-- snip --> The easiest solution is to always enter video/ Signed-off-by: Adrian Bunk Acked-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/Makefile b/drivers/media/Makefile index cc11c4c..09a829d 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -2,12 +2,7 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := common/ - -obj-$(CONFIG_VIDEO_MEDIA) += common/ - -# Since hybrid devices are here, should be compiled if DVB and/or V4L -obj-$(CONFIG_VIDEO_MEDIA) += video/ +obj-y += common/ video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ -- cgit v0.10.2 From b4aba24186d66190b21ab64bf28f22ffc51a9c43 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 08:02:33 -0300 Subject: V4L/DVB (7910): usb: input layer dependency fixes testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index cf4584e..f00a0eb 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig index 0712899..a23cc0a 100644 --- a/drivers/media/dvb/ttusb-dec/Kconfig +++ b/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 -- cgit v0.10.2 From 70345fbe4a76621808219c506f2480b39131e575 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 22 May 2008 19:30:40 -0300 Subject: V4L/DVB (7911): Remove v4l2_video_std_fps prototype declaration The v4l2_video_std_fps function has been removed by Adrian Bunk in 2004 but then its prototype re-appeared in include/media/v4l2-dev.h. Remove it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index a807d2f..33f01ae 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -40,7 +40,6 @@ #define VFL_TYPE_VTX 3 /* Video standard functions */ -extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); extern char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, char *name); -- cgit v0.10.2 From 2f1a1c7f9c10a87a6725e4b9603e4880c2059d71 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 25 May 2008 13:09:51 -0300 Subject: V4L/DVB (7916): dib7000p: fix dib7000p_attach when !CONFIG_DVB_DIB7000P somebody forgot to to fix this header... Thanks to Ingo Molnar for pointing this out. Tested-by: Ingo Molnar Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 081bd81..07c4d12 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -37,7 +37,20 @@ struct dib7000p_config { #define DEFAULT_DIB7000P_I2C_ADDRESS 18 -extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); -- cgit v0.10.2 From 383a211699026ee41d9726e3f5edcfa1b0071b8f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:48:16 -0300 Subject: V4L/DVB (7918): au0828: remove irrelevent analog tuner standby code This code is irrelevant to this driver and should be removed. This was copied from a hack in cx88-dvb.c, which prevents noise coming from the analog tuner (via an audio patch cable from the pci card to the sound hardware) when in digital mode by muting the tda988x. This issue does not apply to this USB hybrid chip design, where a single piece of silicon handles both analog and digital demodulation. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index c86a5f1..c6d4705 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -353,12 +353,6 @@ int au0828_dvb_register(struct au0828_dev *dev) return -1; } - /* Put the analog decoder in standby to keep it quiet */ - au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL); - - if (dvb->frontend->ops.analog_ops.standby) - dvb->frontend->ops.analog_ops.standby(dvb->frontend); - /* register everything */ ret = dvb_register(dev); if (ret < 0) { -- cgit v0.10.2 From 5cf3f5cd1f6ee0d81b75c659c732dd8dd245a350 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:49:03 -0300 Subject: V4L/DVB (7919): VIDEO_AU0828 does not depend on VIDEO_DEV Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index def10d0..52b2491 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -1,7 +1,7 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" - depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB + depends on I2C && INPUT && DVB_CORE && USB select I2C_ALGOBIT select VIDEO_TVEEPROM select DVB_AU8522 if !DVB_FE_CUSTOMIZE -- cgit v0.10.2 From 3b4a9714f43a1d675a4352260a12daae197f37c3 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Mon, 26 May 2008 01:31:17 -0300 Subject: V4L/DVB (7922): tuner-simple: fix tuner_warn() induced kernel oops in simple_tuner_attach() The tuner_warn() macro relies on the local variable "priv" to be a valid pointer. There was a case in simple_tuner_attach() where this cannot be the case yet, so tuner_warn() would dereference a NULL "priv" pointer. Changed the tuner_warn() to a printk() with the originally intended output format. Signed-off-by: Andy Walls Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index be8d903..266c255 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -1018,8 +1018,10 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (1 != i2c_transfer(i2c_adap, &msg, 1)) - tuner_warn("unable to probe %s, proceeding anyway.", - tuners[type].name); + printk(KERN_WARNING "tuner-simple %d-%04x: " + "unable to probe %s, proceeding anyway.", + i2c_adapter_id(i2c_adap), i2c_addr, + tuners[type].name); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v0.10.2 From 7f3917f6484938d56cb5ab660f476c1dfa445a81 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 19 May 2008 22:13:02 -0300 Subject: V4L/DVB (7925): cx18: ensure that the xceive pin is always asserted on init. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index bb8bc86..1e0d32b 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,12 +62,14 @@ void cx18_gpio_init(struct cx18 *cx) gpio_dir = cx->card->gpio_init.direction; gpio_val = cx->card->gpio_init.initial_value; + if (cx->card->xceive_pin) { + gpio_dir |= 1 << cx->card->xceive_pin; + gpio_val |= 1 << cx->card->xceive_pin; + } + if (gpio_dir == 0) return; - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; - CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); -- cgit v0.10.2 From 63b8c709895febf62766dc8e818a1457a520fb15 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 21 May 2008 17:40:19 -0300 Subject: V4L/DVB (7928): cx18: fix audio registers 808 and 80c The handling of the audio registers 808 and 80c were based on old datasheets. Updated to the latest information. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 6686490..9a26751 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -182,14 +182,16 @@ static void input_change(struct cx18 *cx) if (std == V4L2_STD_NTSC_M_JP) { /* Japan uses EIAJ audio standard */ cx18_av_write(cx, 0x808, 0xf7); + cx18_av_write(cx, 0x80b, 0x02); } else if (std == V4L2_STD_NTSC_M_KR) { /* South Korea uses A2 audio standard */ cx18_av_write(cx, 0x808, 0xf8); + cx18_av_write(cx, 0x80b, 0x03); } else { /* Others use the BTSC audio standard */ cx18_av_write(cx, 0x808, 0xf6); + cx18_av_write(cx, 0x80b, 0x01); } - cx18_av_write(cx, 0x80b, 0x00); } else if (std & V4L2_STD_PAL) { /* Follow tuner change procedure for PAL */ cx18_av_write(cx, 0x808, 0xff); @@ -741,8 +743,8 @@ static void log_audio_status(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; u8 download_ctl = cx18_av_read(cx, 0x803); - u8 mod_det_stat0 = cx18_av_read(cx, 0x805); - u8 mod_det_stat1 = cx18_av_read(cx, 0x804); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); u8 audio_config = cx18_av_read(cx, 0x808); u8 pref_mode = cx18_av_read(cx, 0x809); u8 afc0 = cx18_av_read(cx, 0x80b); @@ -760,12 +762,12 @@ static void log_audio_status(struct cx18 *cx) case 0x12: p = "dual with SAP"; break; case 0x14: p = "tri with SAP"; break; case 0xfe: p = "forced mode"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio mode: %s\n", p); switch (mod_det_stat1) { - case 0x00: p = "BTSC"; break; + case 0x00: p = "not defined"; break; case 0x01: p = "EIAJ"; break; case 0x02: p = "A2-M"; break; case 0x03: p = "A2-BG"; break; @@ -779,8 +781,13 @@ static void log_audio_status(struct cx18 *cx) case 0x0b: p = "NICAM-I"; break; case 0x0c: p = "NICAM-L"; break; case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; case 0xff: p = "no detected audio standard"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio standard: %s\n", p); CX18_INFO("Audio muted: %s\n", @@ -789,22 +796,23 @@ static void log_audio_status(struct cx18 *cx) (download_ctl & 0x10) ? "running" : "stopped"); switch (audio_config >> 4) { - case 0x00: p = "BTSC"; break; - case 0x01: p = "EIAJ"; break; - case 0x02: p = "A2-M"; break; - case 0x03: p = "A2-BG"; break; - case 0x04: p = "A2-DK1"; break; - case 0x05: p = "A2-DK2"; break; - case 0x06: p = "A2-DK3"; break; - case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; - case 0x08: p = "AM-L"; break; - case 0x09: p = "NICAM-BG"; break; - case 0x0a: p = "NICAM-DK"; break; - case 0x0b: p = "NICAM-I"; break; - case 0x0c: p = "NICAM-L"; break; - case 0x0d: p = "FM radio"; break; + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; case 0x0f: p = "automatic detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio standard: %s\n", p); @@ -815,12 +823,9 @@ static void log_audio_status(struct cx18 *cx) case 0x02: p = "MONO3 (STEREO forced MONO)"; break; case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; case 0x04: p = "STEREO"; break; - case 0x05: p = "DUAL1 (AB)"; break; - case 0x06: p = "DUAL2 (AC) (FM)"; break; - case 0x07: p = "DUAL3 (BC) (FM)"; break; - case 0x08: p = "DUAL4 (AC) (AM)"; break; - case 0x09: p = "DUAL5 (BC) (AM)"; break; - case 0x0a: p = "SAP"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; default: p = "undefined"; } CX18_INFO("Configured audio mode: %s\n", p); @@ -835,9 +840,11 @@ static void log_audio_status(struct cx18 *cx) case 0x06: p = "BTSC"; break; case 0x07: p = "EIAJ"; break; case 0x08: p = "A2-M"; break; - case 0x09: p = "FM Radio"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; case 0x0f: p = "automatic standard and mode detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio system: %s\n", p); } @@ -857,22 +864,24 @@ static void log_audio_status(struct cx18 *cx) case 5: p = "language AC"; break; case 6: p = "language BC"; break; case 7: p = "language AB"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Preferred audio mode: %s\n", p); if ((audio_config & 0xf) == 0xf) { - switch ((afc0 >> 2) & 0x1) { + switch ((afc0 >> 3) & 0x1) { case 0: p = "system DK"; break; case 1: p = "system L"; break; } CX18_INFO("Selected 65 MHz format: %s\n", p); - switch (afc0 & 0x3) { - case 0: p = "BTSC"; break; - case 1: p = "EIAJ"; break; - case 2: p = "A2-M"; break; - default: p = "undefined"; + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; } CX18_INFO("Selected 45 MHz format: %s\n", p); } -- cgit v0.10.2 From be303e16dbd210077c697aaf2f0960413166b53d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 24 May 2008 12:43:43 -0300 Subject: V4L/DVB (7930): ivtv: bump version to 1.3.0. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index 02c5ab0..442f43f 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,8 +22,8 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 2 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 1 +#define IVTV_DRIVER_VERSION_MINOR 3 +#define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) -- cgit v0.10.2 From 31554ae599a8ff6854bf8ecbedc1946c64854388 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:21:27 -0300 Subject: V4L/DVB (7931): cx18: allow for simultaneous digital and analog capture The HVR-1600 can do both analog and digital capture at the same time. Due to a driver bug -EBUSY would be returned when attempting to setup an analog capture while a digital capture was already in progress. Separate the two internally. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 2bdac5e..87cf410 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -159,7 +159,7 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt { if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) return -EINVAL; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; /* First try to allocate sliced VBI buffers if needed. */ @@ -235,7 +235,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { struct cx2341x_mpeg_params p = cx->params; - int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd); + int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd); if (err) return err; @@ -295,7 +295,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) return cx2341x_ext_ctrls(&cx->params, - atomic_read(&cx->capturing), arg, cmd); + atomic_read(&cx->ana_capturing), arg, cmd); return -EINVAL; } diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 0dd4e05..472f88e 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -889,7 +889,7 @@ static void cx18_remove(struct pci_dev *pci_dev) /* Stop all captures */ CX18_DEBUG_INFO("Stopping all streams\n"); - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) cx18_stop_all_captures(cx); /* Interrupts */ diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a2a6c58..9c6a534 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -380,7 +380,8 @@ struct cx18 { int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ unsigned long i_flags; /* global cx18 flags */ - atomic_t capturing; /* count number of active capture streams */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ spinlock_t lock; /* lock access to this struct */ int search_pack_header; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 0b3141d..d0d7888 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -318,7 +318,7 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, size_t tot_written = 0; int single_frame = 0; - if (atomic_read(&cx->capturing) == 0 && s->id == -1) { + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { /* shouldn't happen */ CX18_DEBUG_WARN("Stream %s not initialized before read\n", s->name); @@ -581,7 +581,7 @@ int cx18_v4l2_close(struct inode *inode, struct file *filp) cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); /* Select correct audio input (i.e. TV tuner or Line in) */ cx18_audio_set_io(cx); - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* Undo video mute */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, cx->params.video_mute | @@ -627,7 +627,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) } if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* switching to radio while capture is in progress is not polite */ cx18_release_stream(s); @@ -694,7 +694,7 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) + if (atomic_read(&cx->ana_capturing)) cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, cx18_find_handle(cx), 1); CX18_DEBUG_INFO("Mute\n"); @@ -702,7 +702,7 @@ void cx18_mute(struct cx18 *cx) void cx18_unmute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) { + if (atomic_read(&cx->ana_capturing)) { cx18_msleep_timeout(100, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, cx18_find_handle(cx), 12); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index dbdcb86..4151f1e 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -247,7 +247,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (!set_fmt || (cx->params.width == w && cx->params.height == h)) return 0; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; cx->params.width = w; @@ -264,7 +264,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI && cx->vbi.sliced_in->service_set && - atomic_read(&cx->capturing) > 0) + atomic_read(&cx->ana_capturing) > 0) return -EBUSY; if (set_fmt) { cx->vbi.sliced_in->service_set = 0; @@ -293,7 +293,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, return 0; if (set == 0) return -EINVAL; - if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0) + if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0) return -EBUSY; cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); @@ -581,7 +581,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg break; if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || - atomic_read(&cx->capturing) > 0) { + atomic_read(&cx->ana_capturing) > 0) { /* Switching standard would turn off the radio or mess with already running streams, prevent that by returning EBUSY. */ @@ -677,7 +677,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; @@ -689,7 +689,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index dee6cc9..5a06586 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -444,7 +444,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); - if (atomic_read(&cx->capturing) == 0 && !ts) { + if (atomic_read(&cx->ana_capturing) == 0 && !ts) { /* Stuff from Windows, we don't know what it is */ cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); @@ -467,7 +467,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx2341x_update(cx, cx18_api_func, NULL, &cx->params); } - if (atomic_read(&cx->capturing) == 0) { + if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); write_reg(7, CX18_DSP0_INTERRUPT_MASK); } @@ -493,7 +493,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } /* you're live! sit back and await interrupts :) */ - atomic_inc(&cx->capturing); + if (!ts) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); return 0; } @@ -524,7 +526,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_DEBUG_INFO("Stop Capture\n"); - if (atomic_read(&cx->capturing) == 0) + if (atomic_read(&cx->tot_capturing) == 0) return 0; if (s->type == CX18_ENC_STREAM_TYPE_MPG) @@ -538,7 +540,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } - atomic_dec(&cx->capturing); + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); @@ -546,7 +550,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = 0xffffffff; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) return 0; write_reg(5, CX18_DSP0_INTERRUPT_MASK); -- cgit v0.10.2 From 8f9935732930e705cab1936a03418ce01aee979a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:45:53 -0300 Subject: V4L/DVB (7932): cx18: mark Compro H900 as fully supported. I always assumed that the Compro H900 could do digital as well, but it turned out that it is an analog-only card. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt index 077d56e..6842c26 100644 --- a/Documentation/video4linux/cx18.txt +++ b/Documentation/video4linux/cx18.txt @@ -1,7 +1,9 @@ Some notes regarding the cx18 driver for the Conexant CX23418 MPEG encoder chip: -1) The only hardware currently supported is the Hauppauge HVR-1600. +1) The only hardware currently supported is the Hauppauge HVR-1600 + card and the Compro VideoMate H900 (note that this card only + supports analog input, it has no digital tuner!). 2) Some people have problems getting the i2c bus to work. Cause unknown. The symptom is that the eeprom cannot be read and the card is diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 553adbf..baccd07 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -126,7 +126,7 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { /* ------------------------------------------------------------------------- */ -/* Compro VideoMate H900: not working at the moment! */ +/* Compro VideoMate H900: note that this card is analog only! */ static const struct cx18_card_pci_info cx18_pci_h900[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, @@ -136,7 +136,7 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "DVB & VBI are not yet supported\n", + .comment = "VBI is not yet supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, -- cgit v0.10.2 From ba60bc673ce7d019ae6684cebbb33e5239346664 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 14:34:36 -0300 Subject: V4L/DVB (7934): cx18: move gpio_dir/val statics to the cx18 struct. The gpio_dir/val statics cannot be global, they are card-specific. Thanks to Andy Walls for pointing this out. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 9c6a534..b943aea 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -424,6 +424,10 @@ struct cx18 { struct mutex i2c_bus_lock[2]; struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + /* v4l2 and User settings */ /* codec settings */ diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 1e0d32b..2f324b8 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -35,9 +35,6 @@ #define CX18_REG_GPIO_OUT2 0xc78104 #define CX18_REG_GPIO_DIR2 0xc7810c -static u32 gpio_dir; -static u32 gpio_val; - /* * HVR-1600 GPIO pins, courtesy of Hauppauge: * @@ -49,25 +46,28 @@ static u32 gpio_val; static void gpio_write(struct cx18 *cx) { - write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff), + u32 dir = cx->gpio_dir; + u32 val = cx->gpio_val; + + write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16), + write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } void cx18_gpio_init(struct cx18 *cx) { - gpio_dir = cx->card->gpio_init.direction; - gpio_val = cx->card->gpio_init.initial_value; + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; if (cx->card->xceive_pin) { - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; } - if (gpio_dir == 0) + if (cx->gpio_dir == 0) return; CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", @@ -88,13 +88,12 @@ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) return 0; CX18_DEBUG_INFO("Resetting tuner\n"); - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val &= ~(1 << cx->card->xceive_pin); + cx->gpio_val &= ~(1 << cx->card->xceive_pin); gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; -- cgit v0.10.2 From 9adea1c00df74823e1719ebbcb86c972c4c2aba1 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 20:26:04 -0300 Subject: V4L/DVB (7943): tuner: add macro, hybrid_tuner_report_instance_count Create a macro to report the number of instances of the tuner driver currently in use. This will allow drivers to perform specific cleanups before destroying the last instance of a tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h index 3ad6c8e..cb1c714 100644 --- a/drivers/media/common/tuners/tuner-i2c.h +++ b/drivers/media/common/tuners/tuner-i2c.h @@ -170,4 +170,12 @@ __fail: \ __ret; \ }) +#define hybrid_tuner_report_instance_count(state) \ +({ \ + int __ret = 0; \ + if (state) \ + __ret = state->i2c_props.count; \ + __ret; \ +}) + #endif /* __TUNER_I2C_H__ */ -- cgit v0.10.2 From c663d03590a882f4834197bff278ca0aa2a95e2e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 21:22:50 -0300 Subject: V4L/DVB (7944): tuner-xc2028: use hybrid_tuner_request_state Use a standard method to manage multiple instances of a hybrid tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 9e9003c..0cbde17 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -46,7 +46,7 @@ module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " "default firmware name\n"); -static LIST_HEAD(xc2028_list); +static LIST_HEAD(hybrid_tuner_instance_list); static DEFINE_MUTEX(xc2028_list_mutex); /* struct for storing firmware table */ @@ -68,12 +68,11 @@ struct firmware_properties { }; struct xc2028_data { - struct list_head xc2028_list; + struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; int (*tuner_callback) (void *dev, int command, int arg); void *video_dev; - int count; __u32 frequency; struct firmware_description *firm; @@ -1072,20 +1071,19 @@ static int xc2028_dvb_release(struct dvb_frontend *fe) mutex_lock(&xc2028_list_mutex); - priv->count--; - - if (!priv->count) { - list_del(&priv->xc2028_list); - + /* only perform final cleanup if this is the last instance */ + if (hybrid_tuner_report_instance_count(priv) == 1) { kfree(priv->ctrl.fname); - free_firmware(priv); - kfree(priv); - fe->tuner_priv = NULL; } + if (priv) + hybrid_tuner_release_state(priv); + mutex_unlock(&xc2028_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -1150,7 +1148,7 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) { struct xc2028_data *priv; - void *video_dev; + int instance; if (debug) printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); @@ -1163,48 +1161,40 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, return NULL; } - video_dev = cfg->i2c_adap->algo_data; - - if (debug) - printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev); - mutex_lock(&xc2028_list_mutex); - list_for_each_entry(priv, &xc2028_list, xc2028_list) { - if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) { - video_dev = NULL; - if (debug) - printk(KERN_DEBUG "xc2028: reusing device\n"); - - break; - } - } - - if (video_dev) { - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - mutex_unlock(&xc2028_list_mutex); - return NULL; - } - - priv->i2c_props.addr = cfg->i2c_addr; - priv->i2c_props.adap = cfg->i2c_adap; - priv->i2c_props.name = "xc2028"; - - priv->video_dev = video_dev; + instance = hybrid_tuner_request_state(struct xc2028_data, priv, + hybrid_tuner_instance_list, + cfg->i2c_adap, cfg->i2c_addr, + "xc2028"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto fail; + break; + case 1: + /* new tuner instance */ priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - list_add_tail(&priv->xc2028_list, &xc2028_list); - } - - fe->tuner_priv = priv; - priv->count++; + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : cfg->i2c_adap->algo_data; - if (debug) - printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count); + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops, sizeof(xc2028_dvb_tuner_ops)); @@ -1217,6 +1207,11 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, mutex_unlock(&xc2028_list_mutex); return fe; +fail: + mutex_unlock(&xc2028_list_mutex); + + xc2028_dvb_release(fe); + return NULL; } EXPORT_SYMBOL(xc2028_attach); -- cgit v0.10.2 From 39028ec69b13712ec1dcd9aa14844bf60f19cb20 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 2 Jun 2008 15:46:51 -0300 Subject: V4L/DVB (7166): [v4l] Add new user class controls and deprecate others These were removed in commit 26d507fcfef7f7d0cd2eec874a87169cc121c835: > -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) > -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) > -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* > last CID + 1 */ > + > +/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ > +#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) > +#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) But there was no warning in Documentation/feature-removal-schedule.txt and I'm receiving reports that it's breaking userspace apps (the gstreamer-v4l2 plugin breaks in Fedora rawhide). You can't just pull things from the published userspace API like that. Please can we revert the addition of _DEPRECATED to these ioctl definitions. Perhaps we can add a runtime warning if they actually get used? Or a compile-time warning if we can manage that? Signed-off-by: David Woodhouse Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index c141118..4a535ea 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -865,9 +865,9 @@ struct v4l2_querymenu #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) +/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ +#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) +#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { -- cgit v0.10.2 From f34ec12a17984d7df784bf49caf64f5f743e5e10 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:31 -0300 Subject: V4L/DVB (7956): cinergyT2: endianness annotations, endianness and race fixes Endianness annotations and fixes + fixing the handling of ->uncorrected_block_count Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index f5010e8..a824f37 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -82,22 +82,22 @@ enum cinergyt2_ep1_cmd { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); struct dvbt_get_status_msg { - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; - uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 viterbi_error_rate; + __le32 rs_error_rate; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -136,6 +136,7 @@ struct cinergyt2 { wait_queue_head_t poll_wq; int pending_fe_events; int disconnect_pending; + unsigned int uncorrected_block_count; atomic_t inuse; void *streambuf; @@ -147,7 +148,7 @@ struct cinergyt2 { char phys[64]; struct delayed_work rc_query_work; int rc_input_event; - u32 rc_last_code; + __le32 rc_last_code; unsigned long last_event_jiffies; #endif }; @@ -160,7 +161,7 @@ enum { struct cinergyt2_rc_event { char type; - uint32_t value; + __le32 value; } __attribute__((packed)); static const uint32_t rc_keys[] = { @@ -619,8 +620,11 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file, { uint32_t unc_count; - unc_count = stat->uncorrected_block_count; - stat->uncorrected_block_count = 0; + if (mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; + unc_count = cinergyt2->uncorrected_block_count; + cinergyt2->uncorrected_block_count = 0; + mutex_unlock(&cinergyt2->sem); /* UNC are already converted to host byte order... */ return put_user(unc_count,(__u32 __user *) arg); @@ -769,7 +773,7 @@ static void cinergyt2_query_rc (struct work_struct *work) input_sync(cinergyt2->rc_input_dev); cinergyt2->rc_input_event = KEY_MAX; } - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); } goto out; } @@ -780,7 +784,7 @@ static void cinergyt2_query_rc (struct work_struct *work) n, le32_to_cpu(rc_events[n].value), rc_events[n].type); if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == ~0) { + rc_events[n].value == cpu_to_le32(~0)) { /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; @@ -795,7 +799,7 @@ static void cinergyt2_query_rc (struct work_struct *work) if (cinergyt2->rc_input_event != KEY_MAX) { if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != ~0) { + cinergyt2->rc_last_code != cpu_to_le32(~0)) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); input_report_key(cinergyt2->rc_input_dev, @@ -829,7 +833,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); input_dev->name = DRIVER_NAME " remote control"; @@ -840,8 +844,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_dev->keycodesize = 0; input_dev->keycodemax = 0; input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor; - input_dev->id.product = cinergyt2->udev->descriptor.idProduct; + input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); input_dev->id.version = 1; input_dev->dev.parent = &cinergyt2->udev->dev; @@ -889,18 +893,16 @@ static void cinergyt2_query (struct work_struct *work) char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; struct dvbt_get_status_msg *s = &cinergyt2->status; uint8_t lock_bits; - uint32_t unc; if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return; - unc = s->uncorrected_block_count; lock_bits = s->lock_bits; cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - unc += le32_to_cpu(s->uncorrected_block_count); - s->uncorrected_block_count = unc; + cinergyt2->uncorrected_block_count += + le32_to_cpu(s->uncorrected_block_count); if (lock_bits != s->lock_bits) { wake_up_interruptible(&cinergyt2->poll_wq); -- cgit v0.10.2 From a230e55d92347e09d9ba2e97096df114b2dfaf2d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:41 -0300 Subject: V4L/DVB (7957): fix the roothole in av7110_av.c direct dereferencing from user-supplied address Signed-off-by: Al Viro Reviewed-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 3e6b650..ec55a968 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -965,8 +965,9 @@ static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) { - int i, n; + unsigned i, n; int progressive = 0; + int match = 0; dprintk(2, "av7110:%p, \n", av7110); @@ -975,12 +976,31 @@ static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len return -EBUSY; } - for (i = 0; i < len - 5; i++) { - /* get progressive flag from picture extension */ - if (buf[i] == 0x00 && buf[i+1] == 0x00 && - buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 && - (buf[i+4] & 0xf0) == 0x10) - progressive = buf[i+5] & 0x08; + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; } /* setting n always > 1, fixes problems when playing stillframes -- cgit v0.10.2 From 3e085629bc921c37c1bb2e2fb6227fa14de14682 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:51 -0300 Subject: V4L/DVB (7958): fix unaligned access in av7110.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 747e7f1..f05d43d 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -51,6 +51,7 @@ #include #include #include +#include #include @@ -1461,9 +1462,9 @@ static int check_firmware(struct av7110* av7110) ptr += 4; /* check dpram file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len >= 512) { printk("dvb-ttpci: dpram file is way too big.\n"); @@ -1478,9 +1479,9 @@ static int check_firmware(struct av7110* av7110) ptr += len; /* check root file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len <= 200000 || len >= 300000 || -- cgit v0.10.2 From b05ce2e79ebaf205b2d66ac32f10e2bd231d80a4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:01 -0300 Subject: V4L/DVB (7959): endianness fix in flexcop-usb.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 449fb5c..ae0d76a 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -379,7 +379,7 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; int buffer_offset = 0; -- cgit v0.10.2 From 12fbcef1055ee7dd522d578c4c6c0e80acaa3d4c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:11 -0300 Subject: V4L/DVB (7960): net: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 56d871c..c2334ae 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -168,7 +168,7 @@ struct dvb_net_priv { * stolen from eth.c out of the linux kernel, hacked for dvb-device * by Michael Holzt */ -static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb, +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; @@ -277,10 +277,10 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if(ext_len >= 0) { p->ule_next_hdr += ext_len; if (!p->ule_bridged) { - p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr); + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); p->ule_next_hdr += 2; } else { - p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); /* This assures the extension handling loop will terminate. */ } } @@ -294,7 +294,7 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if (ule_optional_ext_handlers[htype]) (void)ule_optional_ext_handlers[htype]( p ); p->ule_next_hdr += ext_len; - p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) ); + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); /* * note: the length of the next header type is included in the * length of THIS optional extension header @@ -594,8 +594,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check for complete payload. */ if (priv->ule_sndu_remain <= 0) { /* Check CRC32, we've got it in our skb already. */ - unsigned short ulen = htons(priv->ule_sndu_len); - unsigned short utype = htons(priv->ule_sndu_type); + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); const u8 *tail; struct kvec iov[3] = { { &ulen, sizeof ulen }, -- cgit v0.10.2 From da5ee48677b96dbf44c2ae46857dea060af34164 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:21 -0300 Subject: V4L/DVB (7961): fix endianness bug in dib0700_devices.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 3462238..c4d40fe 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); -- cgit v0.10.2 From d4f979a9e1c5c8ed291e89ec38248823c9a182ba Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:31 -0300 Subject: V4L/DVB (7962): ttusb endianness annotations and fixes Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 732ce4d..5d2d81a 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -552,7 +552,7 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, u16 csum = 0, cc; int i; for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((u16 *) (muxpack + i)); + csum ^= le16_to_cpup((__le16 *) (muxpack + i)); if (csum) { printk("%s: muxpack with incorrect checksum, ignoring\n", __func__); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 42eee04..fefdc05 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -343,7 +343,7 @@ static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; - unsigned int tmp; + __be32 tmp; dprintk("%s\n", __func__); @@ -398,9 +398,9 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - u16 pcr = htons(dec->pid[DMX_PES_PCR]); - u16 audio = htons(dec->pid[DMX_PES_AUDIO]); - u16 video = htons(dec->pid[DMX_PES_VIDEO]); + __be16 pcr = htons(dec->pid[DMX_PES_PCR]); + __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); + __be16 video = htons(dec->pid[DMX_PES_VIDEO]); dprintk("%s\n", __func__); @@ -435,7 +435,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) case 0x01: { /* VideoStream */ int prebytes = pva[5] & 0x03; int postbytes = (pva[5] & 0x0c) >> 2; - u16 v_pes_payload_length; + __be16 v_pes_payload_length; if (output_pva) { dec->video_filter->feed->cb.ts(pva, length, NULL, 0, @@ -1006,7 +1006,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u16 pid; + __be16 pid; u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; @@ -1278,9 +1278,10 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) u8 *firmware = NULL; size_t firmware_size = 0; u16 firmware_csum = 0; - u16 firmware_csum_ns; - u32 firmware_size_nl; - u32 crc32_csum, crc32_check, tmp; + __be16 firmware_csum_ns; + __be32 firmware_size_nl; + u32 crc32_csum, crc32_check; + __be32 tmp; const struct firmware *fw_entry = NULL; dprintk("%s\n", __func__); @@ -1306,7 +1307,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) valid. */ crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; memcpy(&tmp, &firmware[56], 4); - crc32_check = htonl(tmp); + crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", @@ -1627,7 +1628,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, usb_set_intfdata(intf, (void *)dec); - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: ttusb_dec_set_model(dec, TTUSB_DEC3000S); break; @@ -1652,7 +1653,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_init_dvb(dec); dec->adapter.priv = dec; - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); break; diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index eb5eaec..443af24 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -86,7 +86,7 @@ static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0xff }; - u32 freq = htonl(p->frequency / 1000); + __be32 freq = htonl(p->frequency / 1000); memcpy(&b[4], &freq, sizeof (u32)); state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); @@ -117,10 +117,10 @@ static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u32 freq; - u32 sym_rate; - u32 band; - u32 lnb_voltage; + __be32 freq; + __be32 sym_rate; + __be32 band; + __be32 lnb_voltage; freq = htonl(p->frequency + (state->hi_band ? LOF_HI : LOF_LO)); -- cgit v0.10.2 From b0510f8dc73dce56f35337487c6374ae84b15446 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:41 -0300 Subject: V4L/DVB (7963): ivtv: trivial annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index ba06e81..9d23b1e 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -259,6 +259,12 @@ struct ivtv_mailbox_data { /* Scatter-Gather array element, used in DMA transfers */ struct ivtv_sg_element { + __le32 src; + __le32 dst; + __le32 size; +}; + +struct ivtv_sg_host_element { u32 src; u32 dst; u32 size; @@ -349,8 +355,8 @@ struct ivtv_stream { u16 dma_xfer_cnt; /* Base Dev SG Array for cx23415/6 */ - struct ivtv_sg_element *sg_pending; - struct ivtv_sg_element *sg_processing; + struct ivtv_sg_host_element *sg_pending; + struct ivtv_sg_host_element *sg_processing; struct ivtv_sg_element *sg_dma; dma_addr_t sg_handle; int sg_pending_size; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index f2fa434..db813e0 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -587,7 +587,7 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) { + if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { bytes_written += itv->dma_data_req_size; user_buf += itv->dma_data_req_size; count -= itv->dma_data_req_size; diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index d8ba3a4..fba150a 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -231,14 +231,14 @@ static void dma_post(struct ivtv_stream *s) struct ivtv_buffer *buf = NULL; struct list_head *p; u32 offset; - u32 *u32buf; + __le32 *u32buf; int x = 0; IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA", s->name, s->dma_offset); list_for_each(p, &s->q_dma.list) { buf = list_entry(p, struct ivtv_buffer, list); - u32buf = (u32 *)buf->buf; + u32buf = (__le32 *)buf->buf; /* Sync Buffer */ ivtv_buf_sync_for_cpu(s, buf); @@ -444,7 +444,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) } s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; @@ -473,7 +473,7 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s) if (s->q_predma.bytesused) ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index fc8b1ea..71bd13e 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -193,7 +193,7 @@ void ivtv_flush_queues(struct ivtv_stream *s) int ivtv_stream_alloc(struct ivtv_stream *s) { struct ivtv *itv = s->itv; - int SGsize = sizeof(struct ivtv_sg_element) * s->buffers; + int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers; int i; if (s->buffers == 0) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index a9417f6..3092ff1 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1116,7 +1116,7 @@ void ivtv_yuv_setup_stream_frame(struct ivtv *itv) } /* Attempt to dma a frame from a user buffer */ -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src) { struct yuv_playback_info *yi = &itv->yuv_info; struct ivtv_dma_frame dma_args; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 2fe5f12..ca5173f 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -35,7 +35,7 @@ extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); void ivtv_yuv_setup_stream_frame(struct ivtv *itv); -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src); void ivtv_yuv_frame_complete(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); void ivtv_yuv_close(struct ivtv *itv); -- cgit v0.10.2 From 990c81c8afcd71eced2482ad59950ea755eddc7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:01 -0300 Subject: V4L/DVB (7964): cx18 iomem annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 472f88e..4f5d231 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -670,7 +670,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, cx18_init_power(cx, 1); cx18_init_memory(cx); - cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET); + cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); cx18_init_scb(cx); cx18_gpio_init(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index b943aea..de14ab5 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -358,7 +358,7 @@ struct cx18 { u32 v4l2_cap; /* V4L2 capabilities of card */ u32 hw_flags; /* Hardware description of the board */ unsigned mdl_offset; - struct cx18_scb *scb; /* pointer to SCB */ + struct cx18_scb __iomem *scb; /* pointer to SCB */ struct cx18_av_state av_state; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index d0d7888..1e537fe 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -361,7 +361,8 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, cx18_enqueue(s, buf, &s->q_free); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - + cx->enc_mem, 1, buf->id, s->buf_size); } else cx18_enqueue(s, buf, &s->q_io); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 6e14f8b..0590d71 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -75,7 +75,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) cx18_buf_sync_for_device(s, buf); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, buf->id, s->buf_size); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 0c5f328..2a5ccef 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -94,10 +94,10 @@ static const struct cx18_api_info *find_api_info(u32 cmd) return NULL; } -static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, +static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu, u32 *state, u32 *irq, u32 *req) { - struct cx18_mailbox *mb = NULL; + struct cx18_mailbox __iomem *mb = NULL; int wait_count = 0; u32 ack; @@ -142,7 +142,7 @@ static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) { const struct cx18_api_info *info = find_api_info(mb->cmd); - struct cx18_mailbox *ack_mb; + struct cx18_mailbox __iomem *ack_mb; u32 ack_irq; u8 rpu = CPU; @@ -182,7 +182,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) { const struct cx18_api_info *info = find_api_info(cmd); u32 state = 0, irq = 0, req, oldreq, err; - struct cx18_mailbox *mb; + struct cx18_mailbox __iomem *mb; wait_queue_head_t *waitq; int timeout = 100; int cnt = 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 5a06586..1b921a3 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -473,8 +473,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, - (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, - (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); @@ -482,8 +482,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, - buf->id, s->buf_size); + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); } /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { -- cgit v0.10.2 From d8eaa58b06e8779453410d88d2d86e700a0432c6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:51 -0300 Subject: V4L/DVB (7965): annotate bcx_riscmem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index e5979f7..0af5868 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -48,7 +48,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, { u32 instructions,line,todo; struct scatterlist *sg; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -128,7 +128,8 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, unsigned int cpadding) { unsigned int instructions,line,todo,ylen,chroma; - u32 *rp,ri; + __le32 *rp; + u32 ri; struct scatterlist *ysg; struct scatterlist *usg; struct scatterlist *vsg; @@ -244,7 +245,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, { int dwords,rc,line,maxy,start,end,skip,nskips; struct btcx_skiplist *skips; - u32 *rp,ri,ra; + __le32 *rp; + u32 ri,ra; u32 addr; /* skip list for window clipping */ diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index ce0840c..f42701f 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -63,7 +63,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int size) { - u32 *cpu; + __le32 *cpu; dma_addr_t dma; if (NULL != risc->cpu && risc->size < size) diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h index 503e6c6..861bc81 100644 --- a/drivers/media/video/btcx-risc.h +++ b/drivers/media/video/btcx-risc.h @@ -2,8 +2,8 @@ */ struct btcx_riscmem { unsigned int size; - u32 *cpu; - u32 *jmp; + __le32 *cpu; + __le32 *jmp; dma_addr_t dma; }; diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index f24abcd..c4cc2f3 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -823,7 +823,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -883,7 +883,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int padding, unsigned int lines) { u32 instructions, fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -924,7 +924,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, unsigned int lines) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -951,7 +951,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index c4d1aff..60eeda3 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -70,7 +70,7 @@ static DEFINE_MUTEX(devlist); /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be generated _after_ lpi lines are transferred. */ -static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines, unsigned int lpi) @@ -130,7 +130,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int bpl, unsigned int padding, unsigned int lines) { u32 instructions,fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -168,7 +168,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int lines, unsigned int lpi) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -193,7 +193,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) -- cgit v0.10.2 From 576904bb8941d2ae958a097888cee418d5192144 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:11 -0300 Subject: V4L/DVB (7966): cx18: direct dereferencing of iomem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 0590d71..25114a5 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -161,13 +161,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) */ if (sw2) { - if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | + readl(&cx->scb->cpu2epu_irq_ack))) wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | + readl(&cx->scb->apu2epu_irq_ack))) wake_up(&cx->mb_apu_waitq); - if (sw2 & cx->scb->epu2hpu_irq_ack) + if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) wake_up(&cx->mb_epu_waitq); - if (sw2 & cx->scb->hpu2epu_irq_ack) + if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) wake_up(&cx->mb_hpu_waitq); } -- cgit v0.10.2 From c1c36f3128c89aa96f01cbf6d40b0cd77a8bc45e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:21 -0300 Subject: V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index f20a01c..8ef0424 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -34,6 +34,7 @@ #include #include +#include #include #include "bttvp.h" @@ -3858,7 +3859,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) ee += i; /* found a valid descriptor */ - type = be16_to_cpup((u16*)(ee+4)); + type = get_unaligned_be16((__be16 *)(ee+4)); switch(type) { /* 848 based */ @@ -3918,7 +3919,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) btv->c.nr, type); break; } - serial = be32_to_cpup((u32*)(ee+6)); + serial = get_unaligned_be32((__be32 *)(ee+6)); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", -- cgit v0.10.2 From 581a7f1a2ddedbc27ad76f518b861ce1e60ff5ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:31 -0300 Subject: V4L/DVB (7968): zoran: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 81cc3b0..46b7ad4 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -285,7 +285,7 @@ struct zoran_mapping { struct zoran_jpg_buffer { struct zoran_mapping *map; - u32 *frag_tab; /* addresses of frag table */ + __le32 *frag_tab; /* addresses of frag table */ u32 frag_tab_bus; /* same value cached to save time in ISR */ enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ struct zoran_sync bs; /* DONE: info to return to application */ @@ -450,7 +450,7 @@ struct zoran { unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ /* zr36057's code buffer table */ - u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ int jpg_pend[BUZ_MAX_FRAME]; diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 37629ff..88d3697 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -1320,7 +1320,7 @@ error_handler (struct zoran *zr, if (i) { /* Rotate stat_comm entries to make current entry first */ int j; - u32 bus_addr[BUZ_NUM_STAT_COM]; + __le32 bus_addr[BUZ_NUM_STAT_COM]; /* Here we are copying the stat_com array, which * is already in little endian format, so diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index b75313d..5394d7a 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -495,7 +495,7 @@ jpg_fbuffer_alloc (struct file *file) jpg_fbuffer_free(file); return -ENOBUFS; } - fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem; + fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; fh->jpg_buffers.buffer[i].frag_tab_bus = virt_to_bus((void *) mem); @@ -4506,7 +4506,7 @@ zoran_mmap (struct file *file, if (todo > fraglen) todo = fraglen; pos = - le32_to_cpu((unsigned long) fh->jpg_buffers. + le32_to_cpu(fh->jpg_buffers. buffer[i].frag_tab[2 * j]); /* should just be pos on i386 */ page = virt_to_phys(bus_to_virt(pos)) -- cgit v0.10.2 From fa9c13a383ea60b5e0a89e9e180683411bc5552c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:41 -0300 Subject: V4L/DVB (7969): m920x: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index a12e6f7..54626a0 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,7 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include /* debug */ static int dvb_usb_m920x_debug; @@ -347,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { -- cgit v0.10.2 From a954b6681dd389e6bb63d9b5f3254d675f6984c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:51 -0300 Subject: V4L/DVB (7970): mix trivial endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8996175..fb163ec 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1166,13 +1166,13 @@ static int vidioc_g_register(struct file *file, void *priv, reg->val = ret; } else { - u64 val = 0; + __le64 val = 0; ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS, reg->reg, (char *)&val, 2); if (ret < 0) return ret; - reg->val = cpu_to_le64((__u64)val); + reg->val = le64_to_cpu(val); } return 0; @@ -1183,9 +1183,9 @@ static int vidioc_s_register(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u64 buf; + __le64 buf; - buf = le64_to_cpu((__u64)reg->val); + buf = cpu_to_le64(reg->val); return em28xx_write_regs(dev, reg->reg, (char *)&buf, em28xx_reg_len(reg->reg)); diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 32e536e..3d26a30 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -210,7 +210,7 @@ static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val) return ret; } -static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val) +static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val) { int ret; -- cgit v0.10.2 From 637007fe5cfc790c46e3d7af8ba069ddd73f389c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:01 -0300 Subject: V4L/DVB (7971): usb: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e3..733a7ff 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { -- cgit v0.10.2 From 18dcd55a8bf8aa7009c647725b5234c9589c6985 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:11 -0300 Subject: V4L/DVB (7972): or51132.c: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index c7b5785..5ed3254 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -126,7 +126,7 @@ static int or51132_readreg(struct or51132_state *state, u8 reg) reg, err); return -EREMOTEIO; } - return le16_to_cpup((u16*)buf); + return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) @@ -140,9 +140,9 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ - firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); - firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ -- cgit v0.10.2 From 6637dea60ec93916ea0623a0e9bcc2b1769cbc11 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 19:34:09 -0300 Subject: V4L/DVB (7974): fix MEDIA_TUNER && FW_LOADER build error -tip testing found the following build failure: LD .tmp_vmlinux1 drivers/built-in.o: In function `generic_set_freq': tuner-xc2028.c:(.text+0xbd896): undefined reference to `request_firmware' tuner-xc2028.c:(.text+0xbdd7a): undefined reference to `release_firmware' drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0xc68e6): undefined reference to `request_firmware' xc5000.c:(.text+0xc6abe): undefined reference to `release_firmware' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_18_11_34_CEST_2008.bad the reason is another kconfig tool bug that has to be worked around in the driver's Kconfig file: if FW_LOADER is selected in a second dependency, that is not properly propagated up the dependencies. in this case, FW_LOADER is selected from MEDIA_TUNER_XC2028: config MEDIA_TUNER_XC2028 tristate "XCeive xc2028/xc3028 tuners" depends on VIDEO_MEDIA && I2C depends on HOTPLUG select FW_LOADER which got selected by MEDIA_TUNER: config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG but the kconfig tool did not pick up this second-order dependency and allowed CONFIG_FW_LOADER=m to be selected - in which case the build fails. the workaround i found was to move the select of FW_LOADER one level up, so that the buggy kconfig tool can notice it and can act appropriately. This problem can probably be worked around in other ways as well, i went for the minimal fix. Obviously, the kconfig tool should be fixed, it is not reasonable to expect driver authors to do manual dependency resolution (that kconfig itself already does) and uglify the Kconfig files. The kconfig tool did nothing to warn about this situation and did not prevent this faulty .config from being constructed. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index d620654..8548296 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -21,6 +21,7 @@ config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C + select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE -- cgit v0.10.2 From 388748e61cc59487c34e1dfa890ffc44e4d16b1f Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Wed, 21 May 2008 01:20:34 -0300 Subject: V4L/DVB (7975): saa7134_empress This is patch for fix data structure in querycap syscall. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 1314522..81431ee 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -163,8 +163,7 @@ ts_mmap(struct file *file, struct vm_area_struct * vma) static int empress_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, -- cgit v0.10.2 From 5e7fdc5ed820516f8253cc7daad27cf3ee6bd784 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 10:51:53 -0300 Subject: V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 4f5d231..2b810bb 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -751,17 +751,6 @@ static int __devinit cx18_probe(struct pci_dev *dev, if (cx->options.radio > 0) cx->v4l2_cap |= V4L2_CAP_RADIO; - retval = cx18_streams_setup(cx); - if (retval) { - CX18_ERR("Error %d setting up streams\n", retval); - goto free_irq; - } - retval = cx18_streams_register(cx); - if (retval) { - CX18_ERR("Error %d registering devices\n", retval); - goto free_streams; - } - if (cx->options.tuner > -1) { struct tuner_setup setup; @@ -788,7 +777,16 @@ static int __devinit cx18_probe(struct pci_dev *dev, are not. */ cx->tuner_std = cx->std; - cx18_init_on_first_open(cx); + retval = cx18_streams_setup(cx); + if (retval) { + CX18_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = cx18_streams_register(cx); + if (retval) { + CX18_ERR("Error %d registering devices\n", retval); + goto free_streams; + } CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name); -- cgit v0.10.2 From 4ecc24737700f07d6c2a8fdf8c1737e399f1830f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 11:03:12 -0300 Subject: V4L/DVB (7978): cx18: explicitly test for XC2028 tuner Testing whether xceive_pin is non-zero is not good enough as 0 is a valid value. Instead explicitly test whether the Xceive tuner is used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 2f324b8..ceb6365 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,7 +62,7 @@ void cx18_gpio_init(struct cx18 *cx) cx->gpio_dir = cx->card->gpio_init.direction; cx->gpio_val = cx->card->gpio_init.initial_value; - if (cx->card->xceive_pin) { + if (cx->card->tuners[0].tuner == TUNER_XC2028) { cx->gpio_dir |= 1 << cx->card->xceive_pin; cx->gpio_val |= 1 << cx->card->xceive_pin; } -- cgit v0.10.2 From fc60d6e2727157b53d49c8d55888d0a78dafbc9f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 31 May 2008 18:18:55 -0300 Subject: V4L/DVB (7983): tda18271_calc_rf_cal must return the return value of tda18271_lookup_map On the TDA18271HD/C1, we perform RF tracking filter correction for VHF low band, only. If supplied a frequency out of range, the error must be returned to the caller (tda18271c1_rf_tracking_filter_calibration) so that it can decide whether or not to write to register EB14, RFC_CPROG[7:0] Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index 42b5f5d..f1894fe 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -648,11 +648,11 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - tda18271_lookup_map(fe, RF_CAL, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); regs[R_EB14] = val; - return 0; + return ret; } /* -- cgit v0.10.2 From a9606ce697ed719071fcccee8591ff033fa5e16d Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Tue, 3 Jun 2008 21:29:45 -0300 Subject: V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7 Signed-off-by: Daniel Gimpelevich Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 5439573..7cf5685 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -60,7 +60,7 @@ 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] 60 -> Pinnacle Hybrid PCTV [12ab:1788] 61 -> Winfast TV2000 XP Global [107d:6f18] - 62 -> PowerColor Real Angel 330 [14f1:ea3d] + 62 -> PowerColor RA330 [14f1:ea3d] 63 -> Geniatech X8000-MT DVBT [14f1:8852] 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] 65 -> DViCO FusionHDTV 7 Gold [18ac:d610] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index aeba26d..fa6d398 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1493,10 +1493,16 @@ static const struct cx88_board cx88_boards[] = { }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { - .name = "PowerColor Real Angel 330", + .name = "PowerColor RA330", /* Long names may confuse LIRC. */ .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .input = { { + .type = CX88_VMUX_DEBUG, + .vmux = 3, /* Due to the way the cx88 driver is written, */ + .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */ + .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */ + .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */ + }, { /* from the tuner on boot for a little while. */ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00ff, @@ -2424,8 +2430,9 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) switch (core->boardnr) { case CX88_BOARD_POWERCOLOR_REAL_ANGEL: - /* Doesn't work with firmware version 2.7 */ - ctl->fname = "xc3028-v25.fw"; + /* Now works with firmware version 2.7 */ + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: ctl->scode_table = XC3028_FE_ZARLINK456; -- cgit v0.10.2 From 67642a0a58143761d7415f0587e0ac6dd6371251 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Thu, 5 Jun 2008 12:53:08 -0300 Subject: V4L/DVB (8000): tda827x: fix NULL pointer in tda827xa_lna_gain Check that tda827x_config is defined before attempting to use it. Signed-off-by: Sigmund Augdal Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c index d30d2c9..8555d9c 100644 --- a/drivers/media/common/tuners/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -418,13 +418,13 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, unsigned char buf[] = {0x22, 0x01}; int arg; int gp_func; - struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0, - .buf = buf, .len = sizeof(buf) }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) }; if (NULL == priv->cfg) { dprintk("tda827x_config not defined, cannot set LNA gain!\n"); return; } + msg.addr = priv->cfg->switch_addr; if (priv->cfg->config) { if (high) dprintk("setting LNA to high gain\n"); -- cgit v0.10.2 From be573e7872432918e1017cf1e917e73817dcdad6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 5 Jun 2008 13:08:29 -0300 Subject: V4L/DVB (8001): dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 786e37d..3eedfdf 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -37,7 +37,20 @@ struct dib0070_config { u8 flip_chip; }; -extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); extern u16 dib0070_wbd_offset(struct dvb_frontend *); -- cgit v0.10.2 From 6311c90a9ea16b4ab93ed48f1a9022647f6b3c43 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 5 Jun 2008 14:44:39 +0100 Subject: libata: fix G5 SATA broken on -rc5 Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering: fixlet to a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl Signed-off-by: Hugh Dickins Acked-by: Alan Cox Tested-by: Olaf Hering Signed-off-by: Linus Torvalds diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 90d20c6..215d186 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -278,7 +278,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap) return status; } /* Clear INTRQ latch */ - status = ata_sff_check_status(ap); + status = ap->ops->sff_check_status(ap); return status; } -- cgit v0.10.2 From b1fb05cdb9096e3fe1af4474e108dedce2515801 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:42:55 +0200 Subject: [MIPS] Alchemy: export get_au1x00_speed for modules au1xmmc.c driver depends on it, so export it for modules. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c index 46f8ee0..043429d 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/au1000/common/clocks.c @@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void) { return au1x00_clock; } +EXPORT_SYMBOL(get_au1x00_speed); /* * The UART baud base is not known at compile time ... if -- cgit v0.10.2 From ccdb0034f8d5321be42c479dd7fc872ba2a46adb Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:45:23 +0200 Subject: [MIPS] Alchemy: dbdma: add API to delete custom DDMA device ids. Add API to delete custom DDMA device ids create with au1xxx_ddma_device_add(). Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 42d5552..601ee91 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) } EXPORT_SYMBOL(au1xxx_ddma_add_device); +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index ad17d7c..44a67bf 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -355,6 +355,7 @@ void au1xxx_dbdma_dump(u32 chanid); u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +extern void au1xxx_ddma_del_device(u32 devid); void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); /* -- cgit v0.10.2 From 326e2e1a59decc81bea052e8a8c6d75c63daa2db Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 13:55:42 +0200 Subject: [MIPS] R4700: Fix build_tlb_probe_entry Treat R4700 like R4600 in build_tlb_probe_entry. Without this fix kernel will lock up. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 382738c..76da73a 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata; static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_type()) { - /* Found by experiment: R4600 v2.0 needs this, too. */ + /* Found by experiment: R4600 v2.0/R4700 needs this, too. */ case CPU_R4600: + case CPU_R4700: case CPU_R5000: case CPU_R5000A: case CPU_NEVADA: -- cgit v0.10.2 From 057229f9efc7ebebd3ce0496195ed46df631f383 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 2 May 2008 14:08:20 +0300 Subject: [MIPS] Add missing braces to pte_mkyoung MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only the version pte_mkyoung for 36-bit pagetables on 32-bit hw was affected and with this bug being around since November 29, 2004 there is evidence to suport the assumption it was benign ;-) Signed-off-by: Ilpo Järvinen Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index 2f597ee..6a0edf7 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -239,9 +239,10 @@ static inline pte_t pte_mkdirty(pte_t pte) static inline pte_t pte_mkyoung(pte_t pte) { pte.pte_low |= _PAGE_ACCESSED; - if (pte.pte_low & _PAGE_READ) + if (pte.pte_low & _PAGE_READ) { pte.pte_low |= _PAGE_SILENT_READ; pte.pte_high |= _PAGE_SILENT_READ; + } return pte; } #else -- cgit v0.10.2 From 10220c884444a1866bb070e207d84fc18188e2a7 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 17:58:48 +0200 Subject: [MIPS] Fix check for valid stack pointer during backtrace The newly added check for valid stack pointer address breaks at least for 64bit kernels. Use __get_user() for accessing stack content to avoid crashes, when doing the backtrace. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb8b0e2..f9165d1 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29) #ifdef CONFIG_KALLSYMS printk("\n"); #endif -#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000) - if (IS_KVA01(sp)) { - while (!kstack_end(sp)) { - addr = *sp++; - if (__kernel_text_address(addr)) - print_ip_sym(addr); + while (!kstack_end(sp)) { + unsigned long __user *p = + (unsigned long __user *)(unsigned long)sp++; + if (__get_user(addr, p)) { + printk(" (Bad stack address)"); + break; } - printk("\n"); + if (__kernel_text_address(addr)) + print_ip_sym(addr); } + printk("\n"); } #ifdef CONFIG_KALLSYMS -- cgit v0.10.2 From c2719d93836b0b0cdf1725449d87705da6ede9a5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 21 May 2008 01:55:02 +0300 Subject: [MIPS] remove CONFIG_CPU_R4000 line from Makefile The existing options are named CONFIG_CPU_R4300 and CONFIG_CPU_R4X00, and they are directly below. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cc02440..65e46a6 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o -- cgit v0.10.2 From 2bf8ec2d8137e66998435ddf6d4060a558e2f727 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:46 +0200 Subject: [MIPS] IP27: Fix bootmem memory setup Changes in the generic bootmem code broke memory setup for IP27. This patch fixes this by replacing lots of special IP27 code with generic bootmon code. This has been tested only on a single node. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index bf438d0..42cd109 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,10 +33,6 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -#define SLOT_IGNORED 0xffff - -static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES]; -static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS]; static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES]; struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot) return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -/* - * Return the number of pages of memory provided by the given slot - * on the specified node. - */ -static pfn_t __init slot_getsize(cnodeid_t node, int slot) -{ - return (pfn_t) slot_psize_cache[node][slot]; -} - -/* - * Return highest slot filled - */ -static int __init node_getlastslot(cnodeid_t node) -{ - return (int) slot_lastfilled_cache[node]; -} - -/* - * Return the pfn of the last free page of memory on a node. - */ -static pfn_t __init node_getmaxclick(cnodeid_t node) -{ - pfn_t slot_psize; - int slot; - - /* - * Start at the top slot. When we find a slot with memory in it, - * that's the winner. - */ - for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) { - if ((slot_psize = slot_getsize(node, slot))) { - if (slot_psize == SLOT_IGNORED) - continue; - /* Return the basepfn + the slot size, minus 1. */ - return slot_getbasepfn(node, slot) + slot_psize - 1; - } - } - - /* - * If there's no memory on the node, return 0. This is likely - * to cause problems. - */ - return 0; -} - static pfn_t __init slot_psize_compute(cnodeid_t node, int slot) { nasid_t nasid; @@ -404,13 +355,13 @@ static void __init mlreset(void) static void __init szmem(void) { pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ - int slot, ignore; + int slot; cnodeid_t node; num_physpages = 0; for_each_online_node(node) { - ignore = nodebytes = 0; + nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { slot_psize = slot_psize_compute(node, slot); if (slot == 0) @@ -420,21 +371,20 @@ static void __init szmem(void) * kernel text. */ nodebytes += (1LL << SLOT_SHIFT); + + if (!slot_psize) + continue; + if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) > - (slot0sz << PAGE_SHIFT)) - ignore = 1; - if (ignore && slot_psize) { + (slot0sz << PAGE_SHIFT)) { printk("Ignoring slot %d onwards on node %d\n", slot, node); - slot_psize_cache[node][slot] = SLOT_IGNORED; slot = MAX_MEM_SLOTS; continue; } num_physpages += slot_psize; - slot_psize_cache[node][slot] = - (unsigned short) slot_psize; - if (slot_psize) - slot_lastfilled_cache[node] = slot; + add_active_range(node, slot_getbasepfn(node, slot), + slot_getbasepfn(node, slot) + slot_psize); } } } @@ -442,18 +392,20 @@ static void __init szmem(void) static void __init node_mem_init(cnodeid_t node) { pfn_t slot_firstpfn = slot_getbasepfn(node, 0); - pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0); pfn_t slot_freepfn = node_getfirstfree(node); - struct pglist_data *pd; unsigned long bootmap_size; + pfn_t start_pfn, end_pfn; + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); /* * Allocate the node data structures on the node first. */ __node_data[node] = __va(slot_freepfn << PAGE_SHIFT); - pd = NODE_DATA(node); - pd->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->node_start_pfn = start_pfn; + NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; cpus_clear(hub_data(node)->h_cpus); @@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node) sizeof(struct hub_data)); bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, - slot_firstpfn, slot_lastpfn); - free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, - (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT); + start_pfn, end_pfn); + free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size, BOOTMEM_DEFAULT); + sparse_memory_present_with_active_regions(node); } /* @@ -515,16 +467,15 @@ void __init paging_init(void) pagetable_init(); for_each_online_node(node) { - pfn_t start_pfn = slot_getbasepfn(node, 0); - pfn_t end_pfn = node_getmaxclick(node) + 1; + pfn_t start_pfn, end_pfn; - zones_size[ZONE_NORMAL] = end_pfn - start_pfn; - free_area_init_node(node, NODE_DATA(node), - zones_size, start_pfn, NULL); + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); if (end_pfn > max_low_pfn) max_low_pfn = end_pfn; } + zones_size[ZONE_NORMAL] = max_low_pfn; + free_area_init_nodes(zones_size); } void __init mem_init(void) @@ -535,34 +486,10 @@ void __init mem_init(void) high_memory = (void *) __va(num_physpages << PAGE_SHIFT); for_each_online_node(node) { - unsigned slot, numslots; - struct page *end, *p; - /* * This will free up the bootmem, ie, slot 0 memory. */ totalram_pages += free_all_bootmem_node(NODE_DATA(node)); - - /* - * We need to manually do the other slots. - */ - numslots = node_getlastslot(node); - for (slot = 1; slot <= numslots; slot++) { - p = nid_page_nr(node, slot_getbasepfn(node, slot) - - slot_getbasepfn(node, 0)); - - /* - * Free valid memory in current slot. - */ - for (end = p + slot_getsize(node, slot); p < end; p++) { - /* if (!page_is_ram(pgnr)) continue; */ - /* commented out until page_is_ram works */ - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } - } } totalram_pages -= setup_zero_pages(); /* This comes from node 0 */ -- cgit v0.10.2 From b32bb803fb52cc669762780d44b4c3d9e3d799f6 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:57 +0200 Subject: [MIPS] IP27: Fix clockevent setup Fix breakage introduced by converting hub_rt to clockevent. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index f15fc93..ba5cdeb 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) static void __cpuinit ip27_init_secondary(void) { per_cpu_init(); - local_irq_enable(); } static void __cpuinit ip27_smp_finish(void) { + extern void hub_rt_clock_event_init(void); + + hub_rt_clock_event_init(); + local_irq_enable(); } static void __init ip27_cpus_done(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9cebc9e..8b4e854 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode, int rt_timer_irq; +static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); +static DEFINE_PER_CPU(char [11], hub_rt_name); + static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) { - struct clock_event_device *cd = dev_id; unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); int slice = cputoslice(cpu); /* @@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = { #define NSEC_PER_CYCLE 800 #define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE) -static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); -static DEFINE_PER_CPU(char [11], hub_rt_name); - -static void __cpuinit hub_rt_clock_event_init(void) +void __cpuinit hub_rt_clock_event_init(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); @@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void) int irq = rt_timer_irq; sprintf(name, "hub-rt %d", cpu); - cd->name = "HUB-RT", - cd->features = CLOCK_EVT_FEAT_ONESHOT, + cd->name = name; + cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(0x300, cd); - cd->rating = 200, - cd->irq = irq, - cd->cpumask = cpumask_of_cpu(cpu), - cd->rating = 300, - cd->set_next_event = rt_next_event, - cd->set_mode = rt_set_mode, + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = rt_next_event; + cd->set_mode = rt_set_mode; clockevents_register_device(cd); } @@ -261,6 +260,7 @@ void __init plat_time_init(void) { hub_rt_clocksource_init(); hub_rt_clock_event_global_init(); + hub_rt_clock_event_init(); } void __cpuinit cpu_time_init(void) @@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); - hub_rt_clock_event_init(); set_c0_status(SRB_TIMOCLK); } -- cgit v0.10.2 From 96173a6c4ebca4c146bb87026cce78bbe392cb61 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 17 Apr 2008 22:07:42 +0200 Subject: [MIPS] IP27: misc fixes - fix PCI interrupt assignment by emulating ioc3 interrupt pin register - use pci_probe_only mode - select correct page size in bridge - remove no longer needed ioc3_sio_init() code [Ralf: Fix for 64kB or larger pagesizes] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index 1fa0992..b46b3e2 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -14,6 +14,22 @@ #include /* + * Most of the IOC3 PCI config register aren't present + * we emulate what is needed for a normal PCI enumeration + */ +static u32 emulate_ioc3_cfg(int where, int size) +{ + if (size == 1 && where == 0x3d) + return 0x01; + else if (size == 2 && where == 0x3c) + return 0x0100; + else if (size == 4 && where == 0x3c) + return 0x00000100; + + return 0; +} + +/* * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work @@ -64,7 +80,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } @@ -127,7 +143,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bb64828..a185169 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; + extern int pci_probe_only; + + pci_probe_only = 1; printk("a bridge\n"); @@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP; +#ifdef CONFIG_PAGE_SIZE_4KB + bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; +#else /* 16kB or larger */ + bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; +#endif /* * Hmm... IRIX sets additional bits in the address which diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 7093e7c..4a500e8 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void) return NASID_TO_COMPACT_NODEID(get_nasid()); } -/* Extracted from the IOC3 meta driver. FIXME. */ -static inline void ioc3_sio_init(void) -{ - struct ioc3 *ioc3; - nasid_t nid; - long loops; - - nid = get_nasid(); - ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base; - - ioc3->sscr_a = 0; /* PIO mode for uarta. */ - ioc3->sscr_b = 0; /* PIO mode for uartb. */ - ioc3->sio_iec = ~0; - ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT); - - loops=1000000; while(loops--); - ioc3->sregs.uarta.iu_fcr = 0; - ioc3->sregs.uartb.iu_fcr = 0; - loops=1000000; while(loops--); -} - static inline void ioc3_eth_init(void) { struct ioc3 *ioc3; @@ -234,7 +213,6 @@ void __init plat_mem_setup(void) panic("Kernel compiled for N mode."); #endif - ioc3_sio_init(); ioc3_eth_init(); per_cpu_init(); -- cgit v0.10.2 From 272bace7f3753ea8bf6ee80e3a6b32fa64190744 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 26 May 2008 09:35:47 +0100 Subject: [MIPS] Add accessors for random register. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index aa17f65..a46f8e2 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -765,6 +765,9 @@ do { \ #define read_c0_index() __read_32bit_c0_register($0, 0) #define write_c0_index(val) __write_32bit_c0_register($0, 0, val) +#define read_c0_random() __read_32bit_c0_register($1, 0) +#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) + #define read_c0_entrylo0() __read_ulong_c0_register($2, 0) #define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) -- cgit v0.10.2 From 482845a348f76fbf9cec6dda0f1eb113d4fafd9d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 26 May 2008 09:47:55 +0100 Subject: [MIPS] Fix build error - Delete debugging crap that crept in with CMP Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 008fd82..fe2cac1 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -58,27 +58,8 @@ static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; extern int cp0_perfcount_irq; -DEFINE_PER_CPU(unsigned int, tickcount); -#define tickcount_this_cpu __get_cpu_var(tickcount) -static unsigned long ledbitmask; - static void mips_timer_dispatch(void) { -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) - /* - * Yes, this is very tacky, won't work as expected with SMTC and - * dyntick will break it, - * but it gives me a nice warm feeling during debug - */ -#define LEDBAR 0xbf000408 - if (tickcount_this_cpu++ >= HZ) { - tickcount_this_cpu = 0; - change_bit(smp_processor_id(), &ledbitmask); - smp_wmb(); /* Make sure every one else sees the change */ - /* This will pick up any recent changes made by other CPU's */ - *(unsigned int *)LEDBAR = ledbitmask; - } -#endif do_IRQ(mips_cpu_timer_irq); } -- cgit v0.10.2 From 2cc3c0b67bdde7263f6eb16c16709e0b84047646 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 27 May 2008 17:27:28 +0200 Subject: [MIPS] Fix typo in header guard Signed-off-by: Vegard Nossum Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h index 20b6660..4ca3063 100644 --- a/include/asm-mips/rtlx.h +++ b/include/asm-mips/rtlx.h @@ -3,7 +3,7 @@ * */ -#ifndef __ASM_RTLX_H +#ifndef __ASM_RTLX_H_ #define __ASM_RTLX_H_ #include -- cgit v0.10.2 From cd9da13d6ef4f4b652a9a885d4a7c80e40fed229 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 7 May 2008 23:38:15 +0900 Subject: Fix divide by zero error in build_clear_page() and build_copy_page() Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index d827d61..cab81f4 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_clear_store / cache_line_size) * - cache_line_size; + off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) + * cache_line_size : 0; while (off) { build_clear_pref(&buf, -off); off -= cache_line_size; @@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); off -= cache_line_size; -- cgit v0.10.2 From 5a515bcbea580a65ced92405b083299df9003748 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 5 Jun 2008 10:32:23 -0600 Subject: PNP: skip UNSET MEM resources as well as DISABLED ones We don't need to reserve "unset" resources. Trying to reserve them results in messages like this, which are ugly but harmless: system 00:08: iomem range 0x0-0x0 could not be reserved Future PNP patches will remove use of IORESOURCE_UNSET, but we still need it for now. Signed-off-by: Bjorn Helgaas Signed-off-by: Linus Torvalds diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 8f0a570..cf4e07b 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_DISABLED) + if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v0.10.2 From 609a70ac927b72da647ccee7873d928d45055eae Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 5 Jun 2008 17:07:35 +0100 Subject: FRV: ip_fast_csum() requires a memory clobber on its inline asm ip_fast_csum() requires a memory clobber on its inline asm as it accesses memory in a fashion that gcc can't predict. The GCC manual says: If your assembler instructions access memory in an unpredictable fashion, add `memory' to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. The bug hasn't been noticed in FRV, but it has been seen in PA-RISC. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h index 9b16898..269da09 100644 --- a/include/asm-frv/checksum.h +++ b/include/asm-frv/checksum.h @@ -75,7 +75,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) : "0" (sum), "1" (iph), "2" (ihl), "3" (4), "m"(*(volatile struct { int _[100]; } *)iph) - : "icc0", "icc1" + : "icc0", "icc1", "memory" ); return (__force __sum16)~sum; -- cgit v0.10.2 From 16104b5504fa8be130f7f127a5a1c7dd774efc44 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 22:47:13 +0200 Subject: x86: fix CONFIG_NONPROMISC_DEVMEM prompt and help text Here is an attempt to translate the prompt and help text into something which is legible and, as a bonus, correct. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31b..1836337 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -6,15 +6,19 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" config NONPROMISC_DEVMEM - bool "Disable promiscuous /dev/mem" + bool "Filter access to /dev/mem" help - The /dev/mem file by default only allows userspace access to PCI - space and the BIOS code and data regions. This is sufficient for - dosemu and X and all common users of /dev/mem. With this config - option, you allow userspace access to all of memory, including - kernel and userspace memory. Accidental access to this is - obviously disasterous, but specific access can be used by people - debugging the kernel. + If this option is left off, you allow userspace access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to PCI space and the BIOS code and data regions. + This is sufficient for dosemu and X and all common users of + /dev/mem. + + If in doubt, say Y. config EARLY_PRINTK bool "Early printk" if EMBEDDED -- cgit v0.10.2 From efedf51c866130945b5db755cb58670e60205d83 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 4 Jun 2008 17:18:42 +0200 Subject: Add 'rd' alias to new brd ramdisk driver Alias brd to rd in the hope of helping legacy users. Suggested by Jan. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 680cdfc..24b97b0 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -397,6 +397,7 @@ module_param(max_part, int, 0); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); +MODULE_ALIAS("rd"); #ifndef MODULE /* Legacy boot options - nonmodular */ -- cgit v0.10.2 From ddb2c43594f22843e9f3153da151deaba1a834c5 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Wed, 4 Jun 2008 09:16:33 -0700 Subject: asn1: additional sanity checking during BER decoding - Don't trust a length which is greater than the working buffer. An invalid length could cause overflow when calculating buffer size for decoding oid. - An oid length of zero is invalid and allows for an off-by-one error when decoding oid because the first subid actually encodes first 2 subids. - A primitive encoding may not have an indefinite length. Thanks to Wei Wang from McAfee for report. Cc: Steven French Cc: stable@kernel.org Acked-by: Patrick McHardy Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index cb52cbb..f58e41d 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -186,6 +186,11 @@ asn1_length_decode(struct asn1_ctx *ctx, unsigned int *def, unsigned int *len) } } } + + /* don't trust len bigger than ctx buffer */ + if (*len > ctx->end - ctx->pointer) + return 0; + return 1; } @@ -203,6 +208,10 @@ asn1_header_decode(struct asn1_ctx *ctx, if (!asn1_length_decode(ctx, &def, &len)) return 0; + /* primitive shall be definite, indefinite shall be constructed */ + if (*con == ASN1_PRI && !def) + return 0; + if (def) *eoc = ctx->pointer + len; else @@ -389,6 +398,11 @@ asn1_oid_decode(struct asn1_ctx *ctx, unsigned long *optr; size = eoc - ctx->pointer + 1; + + /* first subid actually encodes first two subids */ + if (size < 2 || size > ULONG_MAX/sizeof(unsigned long)) + return 0; + *oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC); if (*oid == NULL) return 0; diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c index 5daefad..7750c97 100644 --- a/net/ipv4/netfilter/nf_nat_snmp_basic.c +++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c @@ -232,6 +232,11 @@ static unsigned char asn1_length_decode(struct asn1_ctx *ctx, } } } + + /* don't trust len bigger than ctx buffer */ + if (*len > ctx->end - ctx->pointer) + return 0; + return 1; } @@ -250,6 +255,10 @@ static unsigned char asn1_header_decode(struct asn1_ctx *ctx, if (!asn1_length_decode(ctx, &def, &len)) return 0; + /* primitive shall be definite, indefinite shall be constructed */ + if (*con == ASN1_PRI && !def) + return 0; + if (def) *eoc = ctx->pointer + len; else @@ -434,6 +443,11 @@ static unsigned char asn1_oid_decode(struct asn1_ctx *ctx, unsigned long *optr; size = eoc - ctx->pointer + 1; + + /* first subid actually encodes first two subids */ + if (size < 2 || size > ULONG_MAX/sizeof(unsigned long)) + return 0; + *oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC); if (*oid == NULL) { if (net_ratelimit()) -- cgit v0.10.2 From adbd5886da5f467148b26cca3728ab0e672b3fcc Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Tue, 3 Jun 2008 00:20:28 +0200 Subject: doc: add suggestions about good practises for maintainers Suggest how to deal with patch modifications caused by merging or back-porting when you're a maintainer. Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 9c93a03..118ca6e 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -327,6 +327,52 @@ Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. +If you are a subsystem or branch maintainer, sometimes you need to slightly +modify patches you receive in order to merge them, because the code is not +exactly the same in your tree and the submitters'. If you stick strictly to +rule (c), you should ask the submitter to rediff, but this is a totally +counter-productive waste of time and energy. Rule (b) allows you to adjust +the code, but then it is very impolite to change one submitter's code and +make him endorse your bugs. To solve this problem, it is recommended that +you add a line between the last Signed-off-by header and yours, indicating +the nature of your changes. While there is nothing mandatory about this, it +seems like prepending the description with your mail and/or name, all +enclosed in square brackets, is noticeable enough to make it obvious that +you are responsible for last-minute changes. Example : + + Signed-off-by: Random J Developer + [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] + Signed-off-by: Lucky K Maintainer + +This practise is particularly helpful if you maintain a stable branch and +want at the same time to credit the author, track changes, merge the fix, +and protect the submitter from complaints. Note that under no circumstances +can you change the author's identity (the From header), as it is the one +which appears in the changelog. + +Special note to back-porters: It seems to be a common and useful practise +to insert an indication of the origin of a patch at the top of the commit +message (just after the subject line) to facilitate tracking. For instance, +here's what we see in 2.6-stable : + + Date: Tue May 13 19:10:30 2008 +0000 + + SCSI: libiscsi regression in 2.6.25: fix nop timer handling + + commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream + +And here's what appears in 2.4 : + + Date: Tue May 13 22:12:27 2008 +0200 + + wireless, airo: waitbusy() won't delay + + [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] + +Whatever the format, this information provides a valuable help to people +tracking your trees, and to people trying to trouble-shoot bugs in your +tree. + 13) When to use Acked-by: and Cc: -- cgit v0.10.2 From 2bdd1b031b200d55c2512c8d7e0e9bdcf85d011f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 5 Jun 2008 14:14:41 -0700 Subject: PCI/x86: fix up PCI stuff so that PCI_GOANY supports OLPC Previously, one would have to specifically choose CONFIG_OLPC and CONFIG_PCI_GOOLPC in order to enable PCI_OLPC. That doesn't really work for distro kernels, so this patch allows one to choose CONFIG_OLPC and CONFIG_PCI_GOANY in order to build in OLPC support in a generic kernel (as requested by Robert Millan). This also moves GOOLPC before GOANY in the menuconfig list. Finally, make pci_access_init return early if we detect OLPC hardware. There's no need to continue probing stuff, and pci_pcbios_init specifically trashes our settings (we didn't run into that before because PCI_GOANY wasn't supported). Signed-off-by: Andres Salomon Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dcbec34..52e18e6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1508,13 +1508,13 @@ config PCI_GOMMCONFIG config PCI_GODIRECT bool "Direct" -config PCI_GOANY - bool "Any" - config PCI_GOOLPC bool "OLPC" depends on OLPC +config PCI_GOANY + bool "Any" + endchoice config PCI_BIOS @@ -1531,9 +1531,8 @@ config PCI_MMCONFIG depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) config PCI_OLPC - bool - depends on PCI && PCI_GOOLPC - default y + def_bool y + depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) config PCI_DOMAINS def_bool y diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index e70b9c5..b821f44 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -15,7 +15,8 @@ static __init int pci_access_init(void) pci_mmcfg_early_init(); #ifdef CONFIG_PCI_OLPC - pci_olpc_init(); + if (!pci_olpc_init()) + return 0; /* skip additional checks if it's an XO */ #endif #ifdef CONFIG_PCI_BIOS pci_pcbios_init(); diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index 5e76365..e11e9e8 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -302,12 +302,13 @@ static struct pci_raw_ops pci_olpc_conf = { .write = pci_olpc_write, }; -void __init pci_olpc_init(void) +int __init pci_olpc_init(void) { if (!machine_is_olpc() || olpc_has_vsa()) - return; + return -ENODEV; printk(KERN_INFO "PCI: Using configuration type OLPC\n"); raw_pci_ops = &pci_olpc_conf; is_lx = is_geode_lx(); + return 0; } diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index f3972b1..720c4c5 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -101,7 +101,7 @@ extern struct pci_raw_ops pci_direct_conf1; extern int pci_direct_probe(void); extern void pci_direct_init(int type); extern void pci_pcbios_init(void); -extern void pci_olpc_init(void); +extern int pci_olpc_init(void); /* pci-mmconfig.c */ -- cgit v0.10.2 From 9f67fd5db50566728996b0115a08c83d4f902cb3 Mon Sep 17 00:00:00 2001 From: Bertram Felgenhauer Date: Thu, 5 Jun 2008 15:31:22 -0700 Subject: x86/PCI: add workaround for bug in ASUS A7V600 BIOS (rev 1005) This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99 #1 | [] warn_on_slowpath+0x54/0x70 | [] ? vt_console_print+0x210/0x2b0 | [] ? vt_console_print+0x0/0x2b0 | [] ? __call_console_drivers+0x43/0x60 | [] ? _call_console_drivers+0x52/0x80 | [] ? release_console_sem+0x1c9/0x200 | [] ? raw_pci_read+0x41/0x70 | [] ? pci_read+0x2f/0x40 | [] pirq_via586_get+0x4a/0x60 | [] ? pirq_via586_get+0x0/0x60 | [] pcibios_lookup_irq+0x15d/0x430 | [] pcibios_irq_init+0x17a/0x3e0 | [] ? kernel_init+0x0/0x250 | [] kernel_init+0x73/0x250 | [] ? pcibios_irq_init+0x0/0x3e0 | [] ? schedule_tail+0x10/0x40 | [] ? ret_from_fork+0x6/0x1c | [] ? kernel_init+0x0/0x250 | [] ? kernel_init+0x0/0x250 | [] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: Bertram Felgenhauer Cc: Jesse Barnes Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0908fca..ca8df9c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -621,6 +621,13 @@ static __init int via_router_probe(struct irq_router *r, */ device = PCI_DEVICE_ID_VIA_8235; break; + case PCI_DEVICE_ID_VIA_8237: + /** + * Asus a7v600 bios wrongly reports 8237 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8237; + break; } } -- cgit v0.10.2 From 203c80187eba037f2d6562e0d5847014746726dd Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Thu, 5 Jun 2008 19:10:21 -0400 Subject: mmc: Fix crash in mmc_block on 64-bit Fairly simple. "dev_use" was being allocated as a zero length array because of bad math on 64-bit systems, causing a crash in find_first_zero_bit(). One-liner follows: Signed-off-by: Ben Collins Acked-by: Pierre Ossman Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 91ded3e..f9ad960 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -46,7 +46,7 @@ #define MMC_SHIFT 3 #define MMC_NUM_MINORS (256 >> MMC_SHIFT) -static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; +static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS); /* * There is one mmc_blk_data per slot. -- cgit v0.10.2 From 868e15dbd2940f9453b4399117686f408dc77299 Mon Sep 17 00:00:00 2001 From: Jaroslav Franek Date: Fri, 6 Jun 2008 11:04:19 +0200 Subject: sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA card When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: Jaroslav Franek Acked-by: James Courtier-Dutton Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index abde5b9..548c9cc 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1818,13 +1818,6 @@ int __devinit snd_emu10k1_create(struct snd_card *card, } emu->port = pci_resource_start(pci, 0); - if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED, - "EMU10K1", emu)) { - err = -EBUSY; - goto error; - } - emu->irq = pci->irq; - emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT; if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), 32 * 1024, &emu->ptb_pages) < 0) { @@ -1887,6 +1880,14 @@ int __devinit snd_emu10k1_create(struct snd_card *card, emu->fx8010.etram_pages.area = NULL; emu->fx8010.etram_pages.bytes = 0; + /* irq handler must be registered after I/O ports are activated */ + if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED, + "EMU10K1", emu)) { + err = -EBUSY; + goto error; + } + emu->irq = pci->irq; + /* * Init to 0x02109204 : * Clock accuracy = 0 (1000ppm) -- cgit v0.10.2 From bc01886352c277e310c07befadbb617c8f561b89 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 5 Jun 2008 21:50:04 +0800 Subject: [MTD] m25p80.c mutex unlock fix fix a mutex release bug in function m25p80_write. Signed-off-by: Chen Gong Signed-off-by: David Woodhouse diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 25efd33..b402269 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -346,8 +346,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, mutex_lock(&flash->lock); /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) + if (wait_till_ready(flash)) { + mutex_unlock(&flash->lock); return 1; + } write_enable(flash); -- cgit v0.10.2 From f20d2752980c144c82649eb18746ef0c29f508dd Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 20 May 2008 13:13:50 +0200 Subject: KVM: ia64: fix zero extending for mmio ld1/2/4 emulation in KVM Only copy in the data actually requested by the instruction emulation and zero pad the destination register first. This avoids the problem where emulated mmio access got garbled data from ld2.acq instructions in the vga console driver. Signed-off-by: Jes Sorensen Acked-by: Xiantao Zhang Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c index 351bf70..7f1a858 100644 --- a/arch/ia64/kvm/mmio.c +++ b/arch/ia64/kvm/mmio.c @@ -159,7 +159,8 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest, if (p->u.ioreq.state == STATE_IORESP_READY) { if (dir == IOREQ_READ) - *dest = p->u.ioreq.data; + /* it's necessary to ensure zero extending */ + *dest = p->u.ioreq.data & (~0UL >> (64-(s*8))); } else panic_vm(vcpu); out: -- cgit v0.10.2 From 33e3885de25148e00595c4dd808d6eb15db2edcf Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 21 May 2008 15:34:25 +0300 Subject: KVM: x86 emulator: fix hypercall return value on AMD The hypercall instructions on Intel and AMD are different. KVM allows the guest to choose one or the other (the default is Intel), and if the guest chooses incorrectly, KVM will patch it at runtime to select the correct instruction. This allows live migration between Intel and AMD machines. This patching occurs in the x86 emulator. The current code also executes the hypercall. Unfortunately, the tail end of the x86 emulator code also executes, overwriting the return value of the hypercall with the original contents of rax (which happens to be the hypercall number). Fix not by executing the hypercall in the emulator context; instead let the guest reissue the patched instruction and execute the hypercall via the normal path. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c index 8a96320..932f216 100644 --- a/arch/x86/kvm/x86_emulate.c +++ b/arch/x86/kvm/x86_emulate.c @@ -1727,7 +1727,8 @@ twobyte_insn: if (rc) goto done; - kvm_emulate_hypercall(ctxt->vcpu); + /* Let the processor re-execute the fixed hypercall */ + c->eip = ctxt->vcpu->arch.rip; /* Disable writeback. */ c->dst.type = OP_NONE; break; -- cgit v0.10.2 From b8cee18cc75d7b9dbe6c6526dfae9ab49e84fa95 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:16 +0200 Subject: KVM: s390: use yield instead of schedule to implement diag 0x44 diag 0x44 is the common way on s390 to yield the cpu to the hypervisor. It is called by the guest in cpu_relax and in the spinlock code to yield to other guest cpus. This semantic is similar to yield. Lets replace the call to schedule with yield to make sure that current is really yielding. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index f639a15..a0775e1 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -20,7 +20,7 @@ static int __diag_time_slice_end(struct kvm_vcpu *vcpu) VCPU_EVENT(vcpu, 5, "%s", "diag time slice end"); vcpu->stat.diagnose_44++; vcpu_put(vcpu); - schedule(); + yield(); vcpu_load(vcpu); return 0; } -- cgit v0.10.2 From 74b6b522ec83f9c44fc7743f2adcb24664aa8f45 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:29 +0200 Subject: KVM: s390: fix locking order problem in enable_sie There are potential locking problem in enable_sie. We take the task_lock and the mmap_sem. As exit_mm uses the same locks vice versa, this triggers a lockdep warning. The second problem is that dup_mm and mmput might sleep, so we must not hold the task_lock at that moment. The solution is to dup the mm unconditional and use the task_lock before and afterwards to check if we can use the new mm. dup_mm and mmput are called outside the task_lock, but we run update_mm while holding the task_lock, protection us against ptrace. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Acked-by: Martin Schwidefsky Signed-off-by: Avi Kivity diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 5c1aea9..3d98ba8 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -254,36 +254,46 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk) int s390_enable_sie(void) { struct task_struct *tsk = current; - struct mm_struct *mm; - int rc; + struct mm_struct *mm, *old_mm; - task_lock(tsk); - - rc = 0; + /* Do we have pgstes? if yes, we are done */ if (tsk->mm->context.pgstes) - goto unlock; + return 0; - rc = -EINVAL; + /* lets check if we are allowed to replace the mm */ + task_lock(tsk); if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || - tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) - goto unlock; + tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) { + task_unlock(tsk); + return -EINVAL; + } + task_unlock(tsk); - tsk->mm->context.pgstes = 1; /* dirty little tricks .. */ + /* we copy the mm with pgstes enabled */ + tsk->mm->context.pgstes = 1; mm = dup_mm(tsk); tsk->mm->context.pgstes = 0; - - rc = -ENOMEM; if (!mm) - goto unlock; - mmput(tsk->mm); + return -ENOMEM; + + /* Now lets check again if somebody attached ptrace etc */ + task_lock(tsk); + if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || + tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) { + mmput(mm); + task_unlock(tsk); + return -EINVAL; + } + + /* ok, we are alone. No ptrace, no threads, etc. */ + old_mm = tsk->mm; tsk->mm = tsk->active_mm = mm; preempt_disable(); update_mm(mm, tsk); cpu_set(smp_processor_id(), mm->cpu_vm_mask); preempt_enable(); - rc = 0; -unlock: task_unlock(tsk); - return rc; + mmput(old_mm); + return 0; } EXPORT_SYMBOL_GPL(s390_enable_sie); -- cgit v0.10.2 From 71cde5879f10b639506bc0b9f29a89f58b42a17e Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:34 +0200 Subject: KVM: s390: handle machine checks when guest is running The low-level interrupt handler on s390 checks for _TIF_WORK_INT and exits the guest context, if work is pending. TIF_WORK_INT is defined as_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING. Currently the sie loop checks for signals and reschedule, but it does not check for machine checks. That means that we exit the guest context if a machine check is pending, but we do not handle the machine check. Signed-off-by: Christian Borntraeger CC: Heiko Carstens Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0ac36a6..40e4f2de 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -423,6 +423,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; /* not implemented yet */ } +extern void s390_handle_mcck(void); + static void __vcpu_run(struct kvm_vcpu *vcpu) { memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16); @@ -430,6 +432,9 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) if (need_resched()) schedule(); + if (test_thread_flag(TIF_MCCK_PENDING)) + s390_handle_mcck(); + vcpu->arch.sie_block->icptcode = 0; local_irq_disable(); kvm_guest_enter(); diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c index 5080f34..5bfbe76 100644 --- a/drivers/s390/s390mach.c +++ b/drivers/s390/s390mach.c @@ -207,6 +207,7 @@ s390_handle_mcck(void) do_exit(SIGSEGV); } } +EXPORT_SYMBOL_GPL(s390_handle_mcck); /* * returns 0 if all registers could be validated -- cgit v0.10.2 From 0ff318674503ce3787ef62d84f4d948db204b268 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:37 +0200 Subject: KVM: s390: fix interrupt delivery The current code delivers pending interrupts before it checks for need_resched. On a busy host, this can lead to a longer interrupt latency if the interrupt is injected while the process is scheduled away. This patch moves delivering the interrupt _after_ schedule(), which makes more sense. Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 40e4f2de..ded27c7 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -435,6 +435,8 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) if (test_thread_flag(TIF_MCCK_PENDING)) s390_handle_mcck(); + kvm_s390_deliver_pending_interrupts(vcpu); + vcpu->arch.sie_block->icptcode = 0; local_irq_disable(); kvm_guest_enter(); @@ -480,7 +482,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) might_sleep(); do { - kvm_s390_deliver_pending_interrupts(vcpu); __vcpu_run(vcpu); rc = kvm_handle_sie_intercept(vcpu); } while (!signal_pending(current) && !rc); -- cgit v0.10.2 From 1f0d0f094df9a570dfc26d5eb825986b7e165e1d Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:40 +0200 Subject: KVM: s390: Send program check on access error If the guest accesses non-existing memory, the sie64a function returns -EFAULT. We must check the return value and send a program check to the guest if the sie instruction faulted, otherwise the guest will loop at the faulting code. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index ded27c7..6558b09 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -443,7 +443,10 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); - sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs); + if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { + VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction"); + kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); local_irq_disable(); -- cgit v0.10.2 From e52b2af541bcb299212a63cfa3e3231618a415be Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:44 +0200 Subject: KVM: s390: Fix race condition in kvm_s390_handle_wait The call to add_timer was issued before local_int.lock was taken and before timer_due was set to 0. If the timer expires before the lock is being taken, the timer function will set timer_due to 1 and exit before the vcpu falls asleep. Depending on other external events, the vcpu might sleep forever. This fix pulls setting timer_due to the beginning of the function before add_timer, which ensures correct behavior. Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index fcd1ed8..84a7fed 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -339,6 +339,11 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) if (kvm_cpu_has_interrupt(vcpu)) return 0; + __set_cpu_idle(vcpu); + spin_lock_bh(&vcpu->arch.local_int.lock); + vcpu->arch.local_int.timer_due = 0; + spin_unlock_bh(&vcpu->arch.local_int.lock); + if (psw_interrupts_disabled(vcpu)) { VCPU_EVENT(vcpu, 3, "%s", "disabled wait"); __unset_cpu_idle(vcpu); @@ -366,8 +371,6 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) no_timer: spin_lock_bh(&vcpu->arch.local_int.float_int->lock); spin_lock_bh(&vcpu->arch.local_int.lock); - __set_cpu_idle(vcpu); - vcpu->arch.local_int.timer_due = 0; add_wait_queue(&vcpu->arch.local_int.wq, &wait); while (list_empty(&vcpu->arch.local_int.list) && list_empty(&vcpu->arch.local_int.float_int->list) && -- cgit v0.10.2 From 088af1543c611f4200658250b6a4467b7eb496a6 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Fri, 6 Jun 2008 11:21:33 -0700 Subject: IB/ehca: Reject send WRs only for RESET, INIT and RTR state Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index bbe0436..f093b00 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -421,8 +421,10 @@ int ehca_post_send(struct ib_qp *qp, int ret = 0; unsigned long flags; - if (unlikely(my_qp->state != IB_QPS_RTS)) { - ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num); + /* Reject WR if QP is in RESET, INIT or RTR state */ + if (unlikely(my_qp->state < IB_QPS_RTS)) { + ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x", + my_qp->state, qp->qp_num); return -EINVAL; } -- cgit v0.10.2 From ce263d70e509287ee761f9bba519342f57b121ca Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:51 -0500 Subject: KVM: ppc: Remove duplicate function This was left behind from some code movement. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c index 712d89a..9c8ad85 100644 --- a/arch/powerpc/kvm/booke_guest.c +++ b/arch/powerpc/kvm/booke_guest.c @@ -227,39 +227,6 @@ void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu) } } -static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu) -{ - enum emulation_result er; - int r; - - er = kvmppc_emulate_instruction(run, vcpu); - switch (er) { - case EMULATE_DONE: - /* Future optimization: only reload non-volatiles if they were - * actually modified. */ - r = RESUME_GUEST_NV; - break; - case EMULATE_DO_MMIO: - run->exit_reason = KVM_EXIT_MMIO; - /* We must reload nonvolatiles because "update" load/store - * instructions modify register state. */ - /* Future optimization: only reload non-volatiles if they were - * actually modified. */ - r = RESUME_HOST_NV; - break; - case EMULATE_FAIL: - /* XXX Deliver Program interrupt to guest. */ - printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__, - vcpu->arch.last_inst); - r = RESUME_HOST; - break; - default: - BUG(); - } - - return r; -} - /** * kvmppc_handle_exit * diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h index b35a7e3..5a21115 100644 --- a/include/asm-powerpc/kvm_ppc.h +++ b/include/asm-powerpc/kvm_ppc.h @@ -57,6 +57,7 @@ extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, extern int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, u32 flags); -- cgit v0.10.2 From ac3cd34e4eb9e3dccaec8e586c073ba2660b322f Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:52 -0500 Subject: KVM: ppc: add lwzx/stwz emulation Somehow these load/store instructions got missed before, but weren't used by the guest so didn't break anything. Signed-off-by: Hollis Blanchard Signed-off-by: Christian Ehrhardt Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index a03fe0c..0000974 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -246,6 +246,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) case 31: switch (get_xop(inst)) { + case 23: /* lwzx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1); + break; + case 83: /* mfmsr */ rt = get_rt(inst); vcpu->arch.gpr[rt] = vcpu->arch.msr; @@ -267,6 +272,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]); break; + case 151: /* stwx */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 4, 1); + break; + case 163: /* wrteei */ vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE) | (inst & MSR_EE); -- cgit v0.10.2 From 52435b7c7a29f7dd7947c8c204494d7f52f14813 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:53 -0500 Subject: KVM: ppc: Remove unmatched kunmap() call We're not calling kmap() now, so we shouldn't call kunmap() either. This has no practical effect in the non-highmem case, which is why it hasn't caused more obvious problems. Pointed out by Anthony Liguori. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index f5d7a5e..aa649c7 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -116,8 +116,6 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu, struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index]; struct page *page = vcpu->arch.shadow_pages[index]; - kunmap(vcpu->arch.shadow_pages[index]); - if (get_tlb_v(stlbe)) { if (kvmppc_44x_tlbe_is_writable(stlbe)) kvm_release_page_dirty(page); -- cgit v0.10.2 From 905fa4b9d6e2c9fd1c9ad84e3abe83021f498f53 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:54 -0500 Subject: KVM: ppc: Use a read lock around MMU operations, and release it on error gfn_to_page() and kvm_release_page_clean() are called from other contexts with mmap_sem locked only for reading. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index aa649c7..1c48d61 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -142,18 +142,19 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, stlbe = &vcpu->arch.shadow_tlb[victim]; /* Get reference to new page. */ - down_write(¤t->mm->mmap_sem); + down_read(¤t->mm->mmap_sem); new_page = gfn_to_page(vcpu->kvm, gfn); if (is_error_page(new_page)) { printk(KERN_ERR "Couldn't get guest page!\n"); kvm_release_page_clean(new_page); + up_read(¤t->mm->mmap_sem); return; } hpaddr = page_to_phys(new_page); /* Drop reference to old page. */ kvmppc_44x_shadow_release(vcpu, victim); - up_write(¤t->mm->mmap_sem); + up_read(¤t->mm->mmap_sem); vcpu->arch.shadow_pages[victim] = new_page; -- cgit v0.10.2 From 9dcb40e1aa5bfe7d6ffc729f3c2b6c8f1392d2d3 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:55 -0500 Subject: KVM: ppc: Report bad GFNs This code shouldn't be hit anyways, but when it is, it's useful to have a little more information about the failure. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 1c48d61..75dff7c 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -145,7 +145,7 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, down_read(¤t->mm->mmap_sem); new_page = gfn_to_page(vcpu->kvm, gfn); if (is_error_page(new_page)) { - printk(KERN_ERR "Couldn't get guest page!\n"); + printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn); kvm_release_page_clean(new_page); up_read(¤t->mm->mmap_sem); return; -- cgit v0.10.2 From 27676a3e166b352928a8ef7b1c0e322f3c471a3e Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 6 Jun 2008 11:23:29 -0700 Subject: IB/ipath: Fix SM trap forwarding SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 1ff46ae..5f9315d 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -1492,6 +1492,10 @@ static int process_subn(struct ib_device *ibdev, int mad_flags, goto bail; } + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_REPORT: + case IB_MGMT_METHOD_REPORT_RESP: + case IB_MGMT_METHOD_TRAP_REPRESS: case IB_MGMT_METHOD_GET_RESP: /* * The ib_mad module will call us to process responses -- cgit v0.10.2 From 2f5997140f22f68f6390c49941150d3fa8a95cb7 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 27 May 2008 12:10:20 -0300 Subject: KVM: migrate PIT timer Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on, similarly to what is done for the LAPIC timers, otherwise PIT interrupts will be delayed until an unrelated event causes an exit. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 7c077a9..f2f5d26 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -200,7 +200,6 @@ int __pit_timer_fn(struct kvm_kpit_state *ps) atomic_inc(&pt->pending); smp_mb__after_atomic_inc(); - /* FIXME: handle case where the guest is in guest mode */ if (vcpu0 && waitqueue_active(&vcpu0->wq)) { vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; wake_up_interruptible(&vcpu0->wq); @@ -237,6 +236,19 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data) return HRTIMER_NORESTART; } +void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu) +{ + struct kvm_pit *pit = vcpu->kvm->arch.vpit; + struct hrtimer *timer; + + if (vcpu->vcpu_id != 0 || !pit) + return; + + timer = &pit->pit_state.pit_timer.timer; + if (hrtimer_cancel(timer)) + hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS); +} + static void destroy_pit_timer(struct kvm_kpit_timer *pt) { pr_debug("pit: execute del timer!\n"); diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c index ce1f583..76d736b 100644 --- a/arch/x86/kvm/irq.c +++ b/arch/x86/kvm/irq.c @@ -94,3 +94,9 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec) /* TODO: PIT, RTC etc. */ } EXPORT_SYMBOL_GPL(kvm_timer_intr_post); + +void __kvm_migrate_timers(struct kvm_vcpu *vcpu) +{ + __kvm_migrate_apic_timer(vcpu); + __kvm_migrate_pit_timer(vcpu); +} diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h index 1802134..2a15be2 100644 --- a/arch/x86/kvm/irq.h +++ b/arch/x86/kvm/irq.h @@ -84,6 +84,8 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec); void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu); void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu); void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu); +void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu); +void __kvm_migrate_timers(struct kvm_vcpu *vcpu); int pit_has_pending_timer(struct kvm_vcpu *vcpu); int apic_has_pending_timer(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index ab22615..6b0d5fa 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -688,7 +688,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu) delta = vcpu->arch.host_tsc - tsc_this; svm->vmcb->control.tsc_offset += delta; vcpu->cpu = cpu; - kvm_migrate_apic_timer(vcpu); + kvm_migrate_timers(vcpu); } for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index bfe4db1..96445f3 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -608,7 +608,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (vcpu->cpu != cpu) { vcpu_clear(vmx); - kvm_migrate_apic_timer(vcpu); + kvm_migrate_timers(vcpu); vpid_sync_vcpu_all(vmx); } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 21338bd..00acf13 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2758,7 +2758,7 @@ again: if (vcpu->requests) { if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests)) - __kvm_migrate_apic_timer(vcpu); + __kvm_migrate_timers(vcpu); if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests)) { kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 3989789..092b1b2 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -297,7 +297,7 @@ static inline gpa_t gfn_to_gpa(gfn_t gfn) return (gpa_t)gfn << PAGE_SHIFT; } -static inline void kvm_migrate_apic_timer(struct kvm_vcpu *vcpu) +static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu) { set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests); } -- cgit v0.10.2 From b2c8daddcbe03a22402ecf943bb88302601c6835 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 5 Jun 2008 22:45:50 -0700 Subject: spi: fix refcount-related spidev oops-on-rmmod This addresses other oopsing paths in "spidev" by changing how it manages refcounting. It decouples the lifecycle of the per-device data from the class device (not just the spi device): - Use class_{create,destroy} not class_{register,unregister}. - Use device_{create,destroy} not device_{register,unregister}. - Free the per-device data only when TWO conditions are true: * Driver is unbound from underlying SPI device, and * Device is no longer open (new) Also, spi_{get,set}_drvdata not dev_{get,set}_drvdata for simpler code. Signed-off-by: David Brownell Sebastian Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 41620c0..799337f 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -67,11 +68,12 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) struct spidev_data { - struct device dev; + dev_t devt; spinlock_t spi_lock; struct spi_device *spi; struct list_head device_entry; + /* buffer is NULL unless this device is open (users > 0) */ struct mutex buf_lock; unsigned users; u8 *buffer; @@ -467,7 +469,7 @@ static int spidev_open(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); list_for_each_entry(spidev, &device_list, device_entry) { - if (spidev->dev.devt == inode->i_rdev) { + if (spidev->devt == inode->i_rdev) { status = 0; break; } @@ -500,10 +502,22 @@ static int spidev_release(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); spidev = filp->private_data; filp->private_data = NULL; + + /* last close? */ spidev->users--; if (!spidev->users) { + int dofree; + kfree(spidev->buffer); spidev->buffer = NULL; + + /* ... after we unbound from the underlying device? */ + spin_lock_irq(&spidev->spi_lock); + dofree = (spidev->spi == NULL); + spin_unlock_irq(&spidev->spi_lock); + + if (dofree) + kfree(spidev); } mutex_unlock(&device_list_lock); @@ -530,19 +544,7 @@ static struct file_operations spidev_fops = { * It also simplifies memory management. */ -static void spidev_classdev_release(struct device *dev) -{ - struct spidev_data *spidev; - - spidev = container_of(dev, struct spidev_data, dev); - kfree(spidev); -} - -static struct class spidev_class = { - .name = "spidev", - .owner = THIS_MODULE, - .dev_release = spidev_classdev_release, -}; +static struct class *spidev_class; /*-------------------------------------------------------------------------*/ @@ -570,20 +572,20 @@ static int spidev_probe(struct spi_device *spi) mutex_lock(&device_list_lock); minor = find_first_zero_bit(minors, N_SPI_MINORS); if (minor < N_SPI_MINORS) { - spidev->dev.parent = &spi->dev; - spidev->dev.class = &spidev_class; - spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor); - snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id, + struct device *dev; + + spidev->devt = MKDEV(SPIDEV_MAJOR, minor); + dev = device_create(spidev_class, &spi->dev, spidev->devt, "spidev%d.%d", spi->master->bus_num, spi->chip_select); - status = device_register(&spidev->dev); + status = IS_ERR(dev) ? PTR_ERR(dev) : 0; } else { dev_dbg(&spi->dev, "no minor number available!\n"); status = -ENODEV; } if (status == 0) { set_bit(minor, minors); - dev_set_drvdata(&spi->dev, spidev); + spi_set_drvdata(spi, spidev); list_add(&spidev->device_entry, &device_list); } mutex_unlock(&device_list_lock); @@ -596,19 +598,21 @@ static int spidev_probe(struct spi_device *spi) static int spidev_remove(struct spi_device *spi) { - struct spidev_data *spidev = dev_get_drvdata(&spi->dev); + struct spidev_data *spidev = spi_get_drvdata(spi); /* make sure ops on existing fds can abort cleanly */ spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; + spi_set_drvdata(spi, NULL); spin_unlock_irq(&spidev->spi_lock); /* prevent new opens */ mutex_lock(&device_list_lock); list_del(&spidev->device_entry); - dev_set_drvdata(&spi->dev, NULL); - clear_bit(MINOR(spidev->dev.devt), minors); - device_unregister(&spidev->dev); + device_destroy(spidev_class, spidev->devt); + clear_bit(MINOR(spidev->devt), minors); + if (spidev->users == 0) + kfree(spidev); mutex_unlock(&device_list_lock); return 0; @@ -644,15 +648,15 @@ static int __init spidev_init(void) if (status < 0) return status; - status = class_register(&spidev_class); - if (status < 0) { + spidev_class = class_create(THIS_MODULE, "spidev"); + if (IS_ERR(spidev_class)) { unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); - return status; + return PTR_ERR(spidev_class); } status = spi_register_driver(&spidev_spi); if (status < 0) { - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } return status; @@ -662,7 +666,7 @@ module_init(spidev_init); static void __exit spidev_exit(void) { spi_unregister_driver(&spidev_spi); - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } module_exit(spidev_exit); -- cgit v0.10.2 From e0a115e5aa554b93150a8dc1c3fe15467708abb2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:52 -0700 Subject: md: fix prexor vs sync_request race During the initial array synchronization process there is a window between when a prexor operation is scheduled to a specific stripe and when it completes for a sync_request to be scheduled to the same stripe. When this happens the prexor completes and the stripe is unconditionally marked "insync", effectively canceling the sync_request for the stripe. Prior to 2.6.23 this was not a problem because the prexor operation was done under sh->lock. The effect in older kernels being that the prexor would still erroneously mark the stripe "insync", but sync_request would be held off and re-mark the stripe as "!in_sync". Change the write completion logic to not mark the stripe "in_sync" if a prexor was performed. The effect of the change is to sometimes not set STRIPE_INSYNC. The worst this can do is cause the resync to stall waiting for STRIPE_INSYNC to be set. If this were happening, then STRIPE_SYNCING would be set and handle_issuing_new_read_requests would cause all available blocks to eventually be read, at which point prexor would never be used on that stripe any more and STRIPE_INSYNC would eventually be set. echo repair > /sys/block/mdN/md/sync_action will correct arrays that may have lost this race. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 425958a..f0f0585 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2645,6 +2645,7 @@ static void handle_stripe5(struct stripe_head *sh) struct r5dev *dev; unsigned long pending = 0; mdk_rdev_t *blocked_rdev = NULL; + int prexor; memset(&s, 0, sizeof(s)); pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d " @@ -2774,9 +2775,11 @@ static void handle_stripe5(struct stripe_head *sh) /* leave prexor set until postxor is done, allows us to distinguish * a rmw from a rcw during biodrain */ + prexor = 0; if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) && test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) { + prexor = 1; clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete); clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack); clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending); @@ -2810,6 +2813,8 @@ static void handle_stripe5(struct stripe_head *sh) if (!test_and_set_bit( STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; + if (prexor) + continue; if (!test_bit(R5_Insync, &dev->flags) || (i == sh->pd_idx && s.failed == 0)) set_bit(STRIPE_INSYNC, &sh->state); -- cgit v0.10.2 From a6d8113a986c66aeb379a26b6e0062488b3e59e1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:53 -0700 Subject: md: fix uninitialized use of mddev->recovery_wait If an array was created with --assume-clean we will oops when trying to set ->resync_max. Fix this by initializing ->recovery_wait in mddev_find. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index 51c19f8..7cf512a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -276,6 +276,7 @@ static mddev_t * mddev_find(dev_t unit) atomic_set(&new->active, 1); spin_lock_init(&new->write_lock); init_waitqueue_head(&new->sb_wait); + init_waitqueue_head(&new->recovery_wait); new->reshape_position = MaxSector; new->resync_max = MaxSector; new->level = LEVEL_NONE; @@ -5665,7 +5666,6 @@ void md_do_sync(mddev_t *mddev) window/2,(unsigned long long) max_sectors/2); atomic_set(&mddev->recovery_active, 0); - init_waitqueue_head(&mddev->recovery_wait); last_check = 0; if (j>2) { -- cgit v0.10.2 From c337869d95011495fa181536786e74aa2d7ff031 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:54 -0700 Subject: md: do not compute parity unless it is on a failed drive If a block is computed (rather than read) then a check/repair operation may be lead to believe that the data on disk is correct, when infact it isn't. So only compute blocks for failed devices. This issue has been around since at least 2.6.12, but has become harder to hit in recent kernels since most reads bypass the cache. echo repair > /sys/block/mdN/md/sync_action will set the parity blocks to the correct state. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f0f0585..c37e256 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2002,6 +2002,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh, * have quiesced. */ if ((s->uptodate == disks - 1) && + (s->failed && disk_idx == s->failed_num) && !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); set_bit(R5_Wantcompute, &dev->flags); @@ -2087,7 +2088,9 @@ static void handle_issuing_new_read_requests6(struct stripe_head *sh, /* we would like to get this block, possibly * by computing it, but we might not be able to */ - if (s->uptodate == disks-1) { + if ((s->uptodate == disks - 1) && + (s->failed && (i == r6s->failed_num[0] || + i == r6s->failed_num[1]))) { pr_debug("Computing stripe %llu block %d\n", (unsigned long long)sh->sector, i); compute_block_1(sh, i, 0); -- cgit v0.10.2 From 6a7d68e899b7f609708e7590784344f03640f774 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 5 Jun 2008 22:45:54 -0700 Subject: cpusets: fix and update Documentation Make the doc consistent with current cpusets implementation. Signed-off-by: Miao Xie Acked-by: Paul Jackson Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index fb7b361..d803c5c 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -199,7 +199,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls. The following rules apply to each cpuset: - Its CPUs and Memory Nodes must be a subset of its parents. - - It can only be marked exclusive if its parent is. + - It can't be marked exclusive unless its parent is. - If its cpu or memory is exclusive, they may not overlap any sibling. These rules, and the natural hierarchy of cpusets, enable efficient @@ -345,7 +345,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task flag, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. -Similarly, setting 'memory_spread_cache' turns on the flag +Similarly, setting 'memory_spread_slab' turns on the flag PF_SPREAD_SLAB, and appropriately marked slab caches will allocate pages from the node returned by cpuset_mem_spread_node(). @@ -709,7 +709,10 @@ Now you want to do something with this cpuset. In this directory you can find several files: # ls -cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks +cpu_exclusive memory_migrate mems tasks +cpus memory_pressure notify_on_release +mem_exclusive memory_spread_page sched_load_balance +mem_hardwall memory_spread_slab sched_relax_domain_level Reading them will give you information about the state of this cpuset: the CPUs and Memory Nodes it can use, the processes that are using -- cgit v0.10.2 From b8c141e8fd80fa64d80c6a74492053f25a28e0ea Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 22:45:55 -0700 Subject: frv: don't offer BINFMT_FLAT Fix the following compile error: CC fs/binfmt_flat.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:36: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/flat.h:14:22: error: asm/flat.h: No such file or directory /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'create_flat_tables': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:124: error: implicit declaration of function 'flat_stack_align' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:125: error: implicit declaration of function 'flat_argvp_envp_on_stack' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'calc_reloc': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:347: error: implicit declaration of function 'flat_reloc_valid' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'load_flat_file': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:479: error: implicit declaration of function 'flat_old_ram_flag' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:755: error: implicit declaration of function 'flat_set_persistent' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:757: error: implicit declaration of function 'flat_get_relocate_addr' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:765: error: implicit declaration of function 'flat_get_addr_from_rp' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:781: error: implicit declaration of function 'flat_put_addr_at_rp' Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Tested-by: David Howells Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 55e8ee1..3263084 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -42,7 +42,7 @@ config BINFMT_ELF_FDPIC config BINFMT_FLAT bool "Kernel support for flat binaries" - depends on !MMU + depends on !MMU && (!FRV || BROKEN) help Support uClinux FLAT format binaries. -- cgit v0.10.2 From e2d4ecafd24d6eee4ae6bdbede0cfd0e78423a33 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:45:56 -0700 Subject: modedb: fix incorrect sync and vmode flags for CVT modes The temporary structure for calculated CVT mode is not initialized. Few fields have only bits or-ed or and-ed so they may be left in incorrect (random) state. Testing of the tridentfb seems like a good exercise for the fbdev layer. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 4735621..d1bbef9 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -590,6 +590,7 @@ done: "", (margins) ? " with margins" : "", (interlace) ? " interlaced" : ""); + memset(&cvt_mode, 0, sizeof(cvt_mode)); cvt_mode.xres = xres; cvt_mode.yres = yres; cvt_mode.refresh = (refresh) ? refresh : 60; -- cgit v0.10.2 From 4647875819aa210115d926242aa18e034517cece Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 5 Jun 2008 22:45:57 -0700 Subject: hugetlb: fix lockdep error ============================================= [ INFO: possible recursive locking detected ] 2.6.26-rc4 #30 --------------------------------------------- heap-overflow/2250 is trying to acquire lock: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0x108/0x280 but task is already holding lock: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0xfc/0x280 other info that might help us debug this: 3 locks held by heap-overflow/2250: #0: (&mm->mmap_sem){----}, at: [] .dup_mm+0x134/0x410 #1: (&mm->mmap_sem/1){--..}, at: [] .dup_mm+0x144/0x410 #2: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0xfc/0x280 stack backtrace: Call Trace: [c00000003b2774e0] [c000000000010ce4] .show_stack+0x74/0x1f0 (unreliable) [c00000003b2775a0] [c0000000003f10e0] .dump_stack+0x20/0x34 [c00000003b277620] [c0000000000889bc] .__lock_acquire+0xaac/0x1080 [c00000003b277740] [c000000000089000] .lock_acquire+0x70/0xb0 [c00000003b2777d0] [c0000000003ee15c] ._spin_lock+0x4c/0x80 [c00000003b277870] [c0000000000cf2e8] .copy_hugetlb_page_range+0x108/0x280 [c00000003b277950] [c0000000000bcaa8] .copy_page_range+0x558/0x790 [c00000003b277ac0] [c000000000050fe0] .dup_mm+0x2d0/0x410 [c00000003b277ba0] [c000000000051d24] .copy_process+0xb94/0x1020 [c00000003b277ca0] [c000000000052244] .do_fork+0x94/0x310 [c00000003b277db0] [c000000000011240] .sys_clone+0x60/0x80 [c00000003b277e30] [c0000000000078c4] .ppc_clone+0x8/0xc Fix is the same way that mm/memory.c copy_page_range does the lockdep annotation. Acked-by: KOSAKI Motohiro Acked-by: Adam Litke Acked-by: Nishanth Aravamudan Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bbf953e..ab17127 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -785,7 +785,7 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, continue; spin_lock(&dst->page_table_lock); - spin_lock(&src->page_table_lock); + spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING); if (!huge_pte_none(huge_ptep_get(src_pte))) { if (cow) huge_ptep_set_wrprotect(src, addr, src_pte); -- cgit v0.10.2 From 4feead71fa68a41db1d4f065c0f91fd67288877d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 5 Jun 2008 22:45:58 -0700 Subject: serial: fix driver_name conflicts Some drivers are using too generic "serial" name for driver_name, this might cause issues, like this: Freescale QUICC Engine UART device driver proc_dir_entry 'serial' already registered Call Trace: [cf82de50] [c0007f7c] show_stack+0x4c/0x1ac (unreliable) [cf82de90] [c00b03fc] proc_register+0xfc/0x1ac [cf82dec0] [c00b05c8] create_proc_entry+0x60/0xac [cf82dee0] [c00b23dc] proc_tty_register_driver+0x60/0x98 [cf82def0] [c016dbd8] tty_register_driver+0x1b4/0x228 [cf82df20] [c0184d70] uart_register_driver+0x144/0x194 [cf82df40] [c030a378] ucc_uart_init+0x2c/0x94 [cf82df50] [c02f21a0] kernel_init+0x98/0x27c [cf82dff0] [c000fa74] kernel_thread+0x44/0x60 ^^ The board is using ucc_uart.c and 8250.c, both registered as "serial". This patch fixes two drivers that are using "serial" for driver_name and not "ttyS" for dev_name. Drivers that are using "ttyS" for dev_name, will conflict anyway, so we don't bother with these. Signed-off-by: Anton Vorontsov Acked-by: Alan Cox Acked-By: Timur Tabi Acked-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c index 2d6c08b..f8e1447 100644 --- a/drivers/serial/sb1250-duart.c +++ b/drivers/serial/sb1250-duart.c @@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init); static struct uart_driver sbd_reg = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "sb1250_duart", .dev_name = "duart", .major = TTY_MAJOR, .minor = SB1250_DUART_MINOR_BASE, diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 01917c4..566a8b4 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -195,7 +195,7 @@ struct uart_qe_port { static struct uart_driver ucc_uart_driver = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "ucc_uart", .dev_name = "ttyQE", .major = SERIAL_QE_MAJOR, .minor = SERIAL_QE_MINOR, -- cgit v0.10.2 From c45dcabd2626c56f8c1235df9db065f584f3ac82 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 5 Jun 2008 22:46:01 -0700 Subject: update checkpatch.pl to version 0.19 This version is a bit of a whopper. This version brings a few new checks, improvements to a number of checks mostly through modifications to the way types are parsed, several fixes to quote/comment handling, as well as the usual slew of fixes for false positives. Of note: - return is not a function and is now reported, - preprocessor directive detection is loosened to match C99 standard, - we now intuit new type modifiers, and - comment handling is much improved Andy Whitcroft (18): Version: 0.19 fix up a couple of missing newlines in reports colon to parenthesis spacing varies on asm values: #include is a preprocessor statement quotes: fix single character quotes at line end add typedef exception for the non-pointer "function types" kerneldoc parameters must be on one line, relax line length types: word boundary is not always required improved #define bracketing reports uninitialized_var is an annotation not a function name possible types: add possible modifier handling possible types: fastcall is a type modifier types: unsigned is not a modifier on all types static/external initialisation to zero should allow modifiers checkpatch: fix recognition of preprocessor directives -- part 2 comments: fix inter-hunk comment tracking return is not a function do not report include/asm/foo.h use in include/linux/foo.h return is not a function -- tighten test [jengelh@computergmbh.de: fix recognition of preprocessor directives] Signed-off-by: Andy Whitcroft Cc: Jan Engelhardt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index b6bbbcd..6971bf0 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -9,7 +9,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.18'; +my $V = '0.19'; use Getopt::Long qw(:config no_auto_abbrev); @@ -115,6 +115,7 @@ our $Attribute = qr{ __kprobes| __(?:mem|cpu|dev|)(?:initdata|init) }x; +our $Modifier; our $Inline = qr{inline|__always_inline|noinline}; our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]}; our $Lval = qr{$Ident(?:$Member)*}; @@ -144,17 +145,17 @@ our $UTF8 = qr { our @typeList = ( qr{void}, - qr{char}, - qr{short}, - qr{int}, - qr{long}, + qr{(?:unsigned\s+)?char}, + qr{(?:unsigned\s+)?short}, + qr{(?:unsigned\s+)?int}, + qr{(?:unsigned\s+)?long}, + qr{(?:unsigned\s+)?long\s+int}, + qr{(?:unsigned\s+)?long\s+long}, + qr{(?:unsigned\s+)?long\s+long\s+int}, qr{unsigned}, qr{float}, qr{double}, qr{bool}, - qr{long\s+int}, - qr{long\s+long}, - qr{long\s+long\s+int}, qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)}, qr{struct\s+$Ident}, qr{union\s+$Ident}, @@ -163,26 +164,29 @@ our @typeList = ( qr{${Ident}_handler}, qr{${Ident}_handler_fn}, ); +our @modifierList = ( + qr{fastcall}, +); sub build_types { + my $mods = "(?: \n" . join("|\n ", @modifierList) . "\n)"; my $all = "(?: \n" . join("|\n ", @typeList) . "\n)"; $NonptrType = qr{ - \b (?:const\s+)? - (?:unsigned\s+)? + (?:$mods\s+)? (?: - $all| - (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\) + (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)| + (?:${all}\b) ) (?:\s+$Sparse|\s+const)* - \b }x; $Type = qr{ - \b$NonptrType\b + $NonptrType (?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)? - (?:\s+$Inline|\s+$Sparse|\s+$Attribute)* + (?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)* }x; $Declare = qr{(?:$Storage\s+)?$Type}; + $Modifier = qr{(?:$Attribute|$Sparse|$mods)}; } build_types(); @@ -329,7 +333,7 @@ sub sanitise_line { $off++; next; } - if (substr($line, $off, 2) eq $sanitise_quote) { + if (substr($line, $off, 2) eq '*/') { $sanitise_quote = ''; substr($res, $off, 2, "$;$;"); $off++; @@ -366,14 +370,14 @@ sub sanitise_line { } # The pathname on a #include may be surrounded by '<' and '>'. - if ($res =~ /^.#\s*include\s+\<(.*)\>/) { + if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) { my $clean = 'X' x length($1); $res =~ s@\<.*\>@<$clean>@; # The whole of a #error is a string. - } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) { + } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) { my $clean = 'X' x length($1); - $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@; + $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@; } return $res; @@ -715,7 +719,7 @@ sub annotate_values { print "DECLARE($1)\n" if ($dbg_values > 1); $type = 'T'; - } elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) { + } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) { print "DEFINE($1,$2)\n" if ($dbg_values > 1); $av_preprocessor = 1; push(@av_paren_type, $type); @@ -724,12 +728,12 @@ sub annotate_values { } $type = 'E'; - } elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) { + } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) { print "UNDEF($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; push(@av_paren_type, $type); - } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) { + } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) { print "PRE_START($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -737,7 +741,7 @@ sub annotate_values { push(@av_paren_type, $type); $type = 'E'; - } elsif ($cur =~ /^(#\s*(?:else|elif))/o) { + } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) { print "PRE_RESTART($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -745,7 +749,7 @@ sub annotate_values { $type = 'E'; - } elsif ($cur =~ /^(#\s*(?:endif))/o) { + } elsif ($cur =~ /^(\#\s*(?:endif))/o) { print "PRE_END($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -837,14 +841,26 @@ sub annotate_values { sub possible { my ($possible, $line) = @_; - #print "CHECK<$possible>\n"; + print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1); if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ && $possible ne 'goto' && $possible ne 'return' && - $possible ne 'struct' && $possible ne 'enum' && $possible ne 'case' && $possible ne 'else' && - $possible ne 'typedef') { - warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); - push(@typeList, $possible); + $possible ne 'asm' && + $possible !~ /^(typedef|struct|enum)\b/) { + # Check for modifiers. + $possible =~ s/\s*$Storage\s*//g; + $possible =~ s/\s*$Sparse\s*//g; + if ($possible =~ /^\s*$/) { + + } elsif ($possible =~ /\s/) { + $possible =~ s/\s*$Type\s*//g; + warn "MODIFIER: $possible ($line)\n" if ($dbg_possible); + push(@modifierList, $possible); + + } else { + warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); + push(@typeList, $possible); + } build_types(); } } @@ -949,6 +965,7 @@ sub process { } else { $realcnt=1+1; } + $in_comment = 0; # Guestimate if this is a continuing comment. Run # the context looking for a comment "edge". If this @@ -1117,7 +1134,9 @@ sub process { ERROR("trailing whitespace\n" . $herevet); } #80 column limit - if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) { + if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ && + $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80) + { WARN("line over 80 characters\n" . $herecurr); } @@ -1159,18 +1178,20 @@ sub process { # Ignore functions being called } elsif ($s =~ /^.\s*$Ident\s*\(/s) { + # declarations always start with types + } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) { + my $type = $1; + $type =~ s/\s+/ /g; + possible($type, "A:" . $s); + # definitions in global scope can only start with types } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) { - possible($1, $s); - - # declarations always start with types - } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) { - possible($1, $s); + possible($1, "B:" . $s); } # any (foo ... *) is a pointer cast, and foo is a type while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) { - possible($1, $s); + possible($1, "C:" . $s); } # Check for any sort of function declaration. @@ -1184,9 +1205,9 @@ sub process { $ctx =~ s/\)[^\)]*$//; for my $arg (split(/\s*,\s*/, $ctx)) { - if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) { + if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) { - possible($1, $s); + possible($1, "D:" . $s); } } } @@ -1221,7 +1242,7 @@ sub process { # if/while/etc brace do not go on next line, unless defining a do while loop, # or if that brace on the next line is for something else - if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) { + if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) { my $pre_ctx = "$1$2"; my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0); @@ -1239,7 +1260,7 @@ sub process { if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { ERROR("that open brace { should be on the previous line\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]"); + "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); } if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ && $ctx =~ /\)\s*\;\s*$/ && @@ -1248,7 +1269,7 @@ sub process { my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]); if ($nindent > $indent) { WARN("trailing semicolon indicates no statements, indent implies otherwise\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]"); + "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); } } } @@ -1284,7 +1305,7 @@ sub process { # # check for malformed paths in #include statements (uses RAW line) - if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) { + if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) { my $path = $1; if ($path =~ m{//}) { ERROR("malformed #include filename\n" . @@ -1316,7 +1337,7 @@ sub process { } # check for external initialisers. - if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) { + if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { ERROR("do not initialise externals to 0 or NULL\n" . $herecurr); } @@ -1330,6 +1351,7 @@ sub process { # make sense. if ($line =~ /\btypedef\s/ && $line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ && + $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ && $line !~ /\b__bitwise(?:__|)\b/) { WARN("do not add new typedefs\n" . $herecurr); } @@ -1388,8 +1410,8 @@ sub process { # function brace can't be on same line, except for #defines of do while, # or if closed on same line - if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and - !($line=~/\#define.*do\s{/) and !($line=~/}/)) { + if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and + !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) { ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr); } @@ -1416,10 +1438,10 @@ sub process { # cpp #define statements have non-optional spaces, ie # if there is a space between the name and the open # parenthesis it is simply not a parameter group. - } elsif ($ctx_before =~ /^.\#\s*define\s*$/) { + } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) { # cpp #elif statement condition may start with a ( - } elsif ($ctx =~ /^.\#\s*elif\s*$/) { + } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) { # If this whole things ends with a type its most # likely a typedef for a function. @@ -1625,13 +1647,14 @@ sub process { ERROR("space prohibited before that close square bracket ']'\n" . $herecurr); } -# check spacing on paretheses +# check spacing on parentheses if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ && $line !~ /for\s*\(\s+;/) { ERROR("space prohibited after that open parenthesis '('\n" . $herecurr); } if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ && - $line !~ /for\s*\(.*;\s+\)/) { + $line !~ /for\s*\(.*;\s+\)/ && + $line !~ /:\s+\)/) { ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr); } @@ -1641,6 +1664,23 @@ sub process { WARN("labels should not be indented\n" . $herecurr); } +# Return is not a function. + if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) { + my $spacing = $1; + my $value = $2; + + # Flatten any parentheses and braces + while ($value =~ s/\([^\(\)]*\)/1/) { + } + + if ($value =~ /^(?:$Ident|-?$Constant)$/) { + ERROR("return is not a function, parentheses are not required\n" . $herecurr); + + } elsif ($spacing !~ /\s+/) { + ERROR("space required before the open parenthesis '('\n" . $herecurr); + } + } + # Need a space before open parenthesis after if, while etc if ($line=~/\b(if|while|for|switch)\(/) { ERROR("space required before the open parenthesis '('\n" . $herecurr); @@ -1660,7 +1700,7 @@ sub process { $s =~ s/\n.*//g; $s =~ s/$;//g; # Remove any comments if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ && - $c !~ /^.\#\s*if/) + $c !~ /^.\s*\#\s*if/) { ERROR("trailing statements should be on next line\n" . $herecurr); } @@ -1719,14 +1759,16 @@ sub process { # } #no spaces allowed after \ in define - if ($line=~/\#define.*\\\s$/) { + if ($line=~/\#\s*define.*\\\s$/) { WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr); } #warn if is #included and is available (uses RAW line) - if ($tree && $rawline =~ m{^.\#\s*include\s*\}) { - my $checkfile = "$root/include/linux/$1.h"; - if (-f $checkfile && $1 ne 'irq') { + if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\}) { + my $checkfile = "include/linux/$1.h"; + if (-f "$root/$checkfile" && $realfile ne $checkfile && + $1 ne 'irq') + { WARN("Use #include instead of \n" . $herecurr); } @@ -1735,45 +1777,87 @@ sub process { # multi-statement macros should be enclosed in a do while loop, grab the # first statement and ensure its the whole macro if its not enclosed # in a known good container - if ($prevline =~ /\#define.*\\/ && - $prevline !~/(?:do\s+{|\(\{|\{)/ && - $line !~ /(?:do\s+{|\(\{|\{)/ && - $line !~ /^.\s*$Declare\s/) { - # Grab the first statement, if that is the entire macro - # its ok. This may start either on the #define line - # or the one below. + if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) { my $ln = $linenr; my $cnt = $realcnt; - my $off = 0; + my ($off, $dstat, $dcond, $rest); + my $ctx = ''; - # If the macro starts on the define line start - # grabbing the statement after the identifier - $prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$}; - ##print "1<$1> 2<$2>\n"; - if (defined $2 && $2 ne '') { - $off = length($1); - $ln--; - $cnt++; - while ($lines[$ln - 1] =~ /^-/) { - $ln--; - $cnt++; - } + my $args = defined($1); + + # Find the end of the macro and limit our statement + # search to that. + while ($cnt > 0 && defined $lines[$ln - 1] && + $lines[$ln - 1] =~ /^(?:-|..*\\$)/) + { + $ctx .= $rawlines[$ln - 1] . "\n"; + $ln++; + $cnt--; + } + $ctx .= $rawlines[$ln - 1]; + + ($dstat, $dcond, $ln, $cnt, $off) = + ctx_statement_block($linenr, $ln - $linenr + 1, 0); + #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n"; + #print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n"; + + # Extract the remainder of the define (if any) and + # rip off surrounding spaces, and trailing \'s. + $rest = ''; + if (defined $lines[$ln - 1] && + $off > length($lines[$ln - 1])) + { + $ln++; + $cnt--; + $off = 0; + } + while ($cnt > 0) { + $rest .= substr($lines[$ln - 1], $off) . "\n"; + $ln++; + $cnt--; + $off = 0; + } + $rest =~ s/\\\n.//g; + $rest =~ s/^\s*//s; + $rest =~ s/\s*$//s; + + # Clean up the original statement. + if ($args) { + substr($dstat, 0, length($dcond), ''); + } else { + $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//; } - my @ctx = ctx_statement($ln, $cnt, $off); - my $ctx_ln = $ln + $#ctx + 1; - my $ctx = join("\n", @ctx); + $dstat =~ s/\\\n.//g; + $dstat =~ s/^\s*//s; + $dstat =~ s/\s*$//s; - # Pull in any empty extension lines. - while ($ctx =~ /\\$/ && - $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) { - $ctx .= $lines[$ctx_ln - 1]; - $ctx_ln++; + # Flatten any parentheses and braces + while ($dstat =~ s/\([^\(\)]*\)/1/) { + } + while ($dstat =~ s/\{[^\{\}]*\}/1/) { } - if ($ctx =~ /\\$/) { - if ($ctx =~ /;/) { + my $exceptions = qr{ + $Declare| + module_param_named| + MODULE_PARAM_DESC| + DECLARE_PER_CPU| + DEFINE_PER_CPU| + __typeof__\( + }x; + if ($rest ne '') { + if ($rest !~ /while\s*\(/ && + $dstat !~ /$exceptions/) + { ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n"); - } else { + } + + } elsif ($ctx !~ /;/) { + if ($dstat ne '' && + $dstat !~ /^(?:$Ident|-?$Constant)$/ && + $dstat !~ /$exceptions/ && + $dstat =~ /$Operators/) + { ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n"); } } @@ -1884,7 +1968,7 @@ sub process { # don't include deprecated include files (uses RAW line) for my $inc (@dep_includes) { - if ($rawline =~ m@\#\s*include\s*\<$inc>@) { + if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) { ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr); } } @@ -1908,7 +1992,7 @@ sub process { } # warn about #if 0 - if ($line =~ /^.#\s*if\s+0\b/) { + if ($line =~ /^.\s*\#\s*if\s+0\b/) { CHK("if this code is redundant consider removing it\n" . $herecurr); } @@ -1920,23 +2004,16 @@ sub process { WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev); } } -# check for needless usb_free_urb() checks - if ($prevline =~ /\bif\s*\(([^\)]*)\)/) { - my $expr = $1; - if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) { - WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev); - } - } # warn about #ifdefs in C files -# if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { +# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { # print "#ifdef in C files should be avoided\n"; # print "$herecurr"; # $clean = 0; # } # warn about spacing in #ifdefs - if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) { + if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) { ERROR("exactly one space required after that #$1\n" . $herecurr); } @@ -1955,7 +2032,7 @@ sub process { } } # check of hardware specific defines - if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { + if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { CHK("architecture specific defines should be avoided\n" . $herecurr); } @@ -1973,15 +2050,18 @@ sub process { # check for new externs in .c files. if ($realfile =~ /\.c$/ && defined $stat && - $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s) + $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s) { - my $paren_space = $1; + my $function_name = $1; + my $paren_space = $2; my $s = $stat; if (defined $cond) { substr($s, 0, length($cond), ''); } - if ($s =~ /^\s*;/) { + if ($s =~ /^\s*;/ && + $function_name ne 'uninitialized_var') + { WARN("externs should be avoided in .c files\n" . $herecurr); } @@ -2030,8 +2110,8 @@ sub process { # use of NR_CPUS is usually wrong # ignore definitions of NR_CPUS and usage to define arrays as likely right if ($line =~ /\bNR_CPUS\b/ && - $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ && - $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ && $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ && $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ && $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/) -- cgit v0.10.2 From d3e49afbb66109613c3474f2273f5830ac2dcb09 Mon Sep 17 00:00:00 2001 From: Michael Halcrow Date: Thu, 5 Jun 2008 22:46:02 -0700 Subject: eCryptfs: remove unnecessary page decrypt call The page decrypt calls in ecryptfs_write() are both pointless and buggy. Pointless because ecryptfs_get_locked_page() has already brought the page up to date, and buggy because prior mmap writes will just be blown away by the decrypt call. This patch also removes the declaration of a now-nonexistent function ecryptfs_write_zeros(). Thanks to Eric Sandeen and David Kleikamp for helping to track this down. Eric said: fsx w/ mmap dies quickly ( < 100 ops) without this, and survives nicely (to millions of ops+) with it in place. Signed-off-by: Michael Halcrow Cc: Eric Sandeen Cc: Dave Kleikamp Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 951ee33..c15c257 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -660,8 +660,6 @@ int ecryptfs_get_tfm_and_mutex_for_cipher_name(struct crypto_blkcipher **tfm, int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key, struct ecryptfs_auth_tok **auth_tok, char *sig); -int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start, - int num_zeros); int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data, loff_t offset, size_t size); int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode, diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index ebf5515..75c2ea9 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -157,20 +157,6 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, ecryptfs_page_idx, rc); goto out; } - if (start_offset_in_page) { - /* Read in the page from the lower - * into the eCryptfs inode page cache, - * decrypting */ - rc = ecryptfs_decrypt_page(ecryptfs_page); - if (rc) { - printk(KERN_ERR "%s: Error decrypting " - "page; rc = [%d]\n", - __func__, rc); - ClearPageUptodate(ecryptfs_page); - page_cache_release(ecryptfs_page); - goto out; - } - } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); /* @@ -349,14 +335,6 @@ int ecryptfs_read(char *data, loff_t offset, size_t size, ecryptfs_page_idx, rc); goto out; } - rc = ecryptfs_decrypt_page(ecryptfs_page); - if (rc) { - printk(KERN_ERR "%s: Error decrypting " - "page; rc = [%d]\n", __func__, rc); - ClearPageUptodate(ecryptfs_page); - page_cache_release(ecryptfs_page); - goto out; - } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); memcpy((data + data_offset), ((char *)ecryptfs_page_virt + start_offset_in_page), -- cgit v0.10.2 From f6266e34713dc286b52623d8a4ff846973c0bcce Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 5 Jun 2008 22:46:03 -0700 Subject: edd: fix incorrect return of 1 from module_init Signed-off-by: Alexey Dobriyan Cc: Matt Domsch Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 74401198..9e4f59d 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -753,7 +753,7 @@ edd_init(void) if (!edd_num_devices()) { printk(KERN_INFO "EDD information not available.\n"); - return 1; + return -ENODEV; } edd_kset = kset_create_and_add("edd", NULL, firmware_kobj); -- cgit v0.10.2 From 33dda515a1995dfb3b6b57d7ace9b3ee9d449c11 Mon Sep 17 00:00:00 2001 From: "Roland.Kletzing" Date: Thu, 5 Jun 2008 22:46:04 -0700 Subject: drivers/char/ip2: fix Kconfig after ip2/ip2main merge As commit 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 ("ip2: fix crashes on load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main one module (ip2), Kconfig shouldn't mention a now non-existing module. Signed-off-by: Roland.Kletzing Acked-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 595a925..d307bf2 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -118,8 +118,8 @@ config COMPUTONE order to become a dial-in server. If you have a card like that, say Y here and read . - To compile this driver as modules, choose M here: the - modules will be called ip2 and ip2main. + To compile this driver as module, choose M here: the + module will be called ip2. config ROCKETPORT tristate "Comtrol RocketPort support" -- cgit v0.10.2 From a5b4592cf77b973c29e7c9695873a26052b58951 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 5 Jun 2008 22:46:05 -0700 Subject: brk: make sys_brk() honor COMPAT_BRK when computing lower bound Fix a regression introduced by commit 4cc6028d4040f95cdb590a87db478b42b8be0508 Author: Jiri Kosina Date: Wed Feb 6 22:39:44 2008 +0100 brk: check the lower bound properly The check in sys_brk() on minimum value the brk might have must take CONFIG_COMPAT_BRK setting into account. When this option is turned on (i.e. we support ancient legacy binaries, e.g. libc5-linked stuff), the lower bound on brk value is mm->end_code, otherwise the brk start is allowed to be arbitrarily shifted. Signed-off-by: Jiri Kosina Tested-by: Geert Uytterhoeven Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/mmap.c b/mm/mmap.c index 669499e..3354fdd 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -245,10 +245,16 @@ asmlinkage unsigned long sys_brk(unsigned long brk) unsigned long rlim, retval; unsigned long newbrk, oldbrk; struct mm_struct *mm = current->mm; + unsigned long min_brk; down_write(&mm->mmap_sem); - if (brk < mm->start_brk) +#ifdef CONFIG_COMPAT_BRK + min_brk = mm->end_code; +#else + min_brk = mm->start_brk; +#endif + if (brk < min_brk) goto out; /* -- cgit v0.10.2 From 6f09bdfc717a0e1a89a029001484d5a195faab64 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 5 Jun 2008 22:46:07 -0700 Subject: m68k: enable CONFIG_COMPAT_BRK by default As some m68k machines have plenty of libc5 binaries in active use, enable CONFIG_COMPAT_BRK by default. Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dca50da..8e2a0f5 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:41 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index c3cd5b7..e2d511e 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:42 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 073ae4b..6e20d65 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:43 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 0789ede..a0a9b30 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:45 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 3e140bf..6778041 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:46 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index ba3a917..7cd3757 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:47 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 4d23f99..0747fa3 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:42:31 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 188847f..e7a8246 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:49 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 983e53d..ab536eb 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:50 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 7707f3f..e05be68 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:51 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index a765f6f..296340d 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:53 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4315139..8d3a416 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:54 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y -- cgit v0.10.2 From 6cfd53fc03670c7a544a56d441eb1a6cc800d72b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 5 Jun 2008 22:46:08 -0700 Subject: nommu: fix kobjsize() for SLOB and SLUB kobjsize() has been abusing page->index as a method for sorting out compound order, which blows up both for page cache pages, and SLOB's reuse of the index in struct slob_page. Presently we are not able to accurately size arbitrary pointers that don't come from kmalloc(), so the best we can do is sort out the compound order from the head page if it's a compound page, or default to 0-order if it's impossible to ksize() the object. Obviously this leaves quite a bit to be desired in terms of object sizing accuracy, but the behaviour is unchanged over the existing implementation, while fixing the page->index oopses originally reported here: http://marc.info/?l=linux-mm&m=121127773325245&w=2 Accuracy could also be improved by having SLUB and SLOB both set PG_slab on ksizeable pages, rather than just handling the __GFP_COMP cases irregardless of the PG_slab setting, as made possibly with Pekka's patches: http://marc.info/?l=linux-kernel&m=121139439900534&w=2 http://marc.info/?l=linux-kernel&m=121139440000537&w=2 http://marc.info/?l=linux-kernel&m=121139440000540&w=2 This is primarily a bugfix for nommu systems for 2.6.26, with the aim being to gradually kill off kobjsize() and its particular brand of object abuse entirely. Reviewed-by: Pekka Enberg Signed-off-by: Paul Mundt Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index dca93fc..3abd084 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -104,21 +104,43 @@ EXPORT_SYMBOL(vmtruncate); unsigned int kobjsize(const void *objp) { struct page *page; + int order = 0; /* * If the object we have should not have ksize performed on it, * return size of 0 */ - if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp)))) + if (!objp) return 0; + if ((unsigned long)objp >= memory_end) + return 0; + + page = virt_to_head_page(objp); + if (!page) + return 0; + + /* + * If the allocator sets PageSlab, we know the pointer came from + * kmalloc(). + */ if (PageSlab(page)) return ksize(objp); - BUG_ON(page->index < 0); - BUG_ON(page->index >= MAX_ORDER); + /* + * The ksize() function is only guaranteed to work for pointers + * returned by kmalloc(). So handle arbitrary pointers, that we expect + * always to be compound pages, here. + */ + if (PageCompound(page)) + order = compound_order(page); - return (PAGE_SIZE << page->index); + /* + * Finally, handle arbitrary pointers that don't set PageSlab. + * Default to 0-order in the case when we're unable to ksize() + * the object. + */ + return PAGE_SIZE << order; } /* -- cgit v0.10.2 From a361a82c10c20eff402d72ce83b66913d04894ee Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:46:08 -0700 Subject: fujitsu-laptop: autoload module on Lifebook P1510D Signed-off-by: Dan Williams Cc: Jonathan Woithe Cc: Len Brown Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index e2e7c05..6d14e8f 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -352,3 +352,9 @@ MODULE_AUTHOR("Jonathan Woithe"); MODULE_DESCRIPTION("Fujitsu laptop extras support"); MODULE_VERSION(FUJITSU_DRIVER_VERSION); MODULE_LICENSE("GPL"); + +static struct pnp_device_id pnp_ids[] = { + { .id = "FUJ02bf" }, + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, pnp_ids); -- cgit v0.10.2 From 34397892a3d677d857fdaf8dec66a66b07dde0b5 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 5 Jun 2008 22:46:09 -0700 Subject: doc: update to URL and status of kernel-docs.txt entry Update status and URL for the "Gary's Encyclopedia" entry. Signed-off-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 5a4ef48..28cdc2a 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -715,14 +715,14 @@ * Name: "Gary's Encyclopedia - The Linux Kernel" Author: Gary (I suppose...). - URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm - Keywords: links, not found here?. + URL: http://slencyclopedia.berlios.de/index.html + Keywords: linux, community, everything! Description: Gary's Encyclopedia exists to allow the rapid finding of documentation and other information of interest to GNU/Linux users. It has about 4000 links to external pages in 150 major categories. This link is for kernel-specific links, documents, - sites... Look there if you could not find here what you were - looking for. + sites... This list is now hosted by developer.Berlios.de, + but seems not to have been updated since sometime in 1999. * Name: "The home page of Linux-MM" Author: The Linux-MM team. -- cgit v0.10.2 From 06e1e4ffbd1932e288839b3140cda6b8141eb684 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:10 -0700 Subject: uml: deal with host time going backwards Protection against the host's time going backwards (eg, ntp activity on the host) by keeping track of the time at the last tick and if it's greater than the current time, keep time stopped until the host catches up. Cc: Nix Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index bee98f4..dec5678 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -106,6 +106,10 @@ static void deliver_alarm(void) unsigned long long this_tick = os_nsecs(); int one_tick = UM_NSEC_PER_SEC / UM_HZ; + /* Protection against the host's time going backwards */ + if ((last_tick != 0) && (this_tick < last_tick)) + this_tick = last_tick; + if (last_tick == 0) last_tick = this_tick - one_tick; @@ -148,6 +152,9 @@ static int after_sleep_interval(struct timespec *ts) start_usecs = usec; start_usecs -= skew / UM_NSEC_PER_USEC; + if (start_usecs < 0) + start_usecs = 0; + tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC, .tv_usec = start_usecs % UM_USEC_PER_SEC }); interval = ((struct itimerval) { { 0, usec }, tv }); -- cgit v0.10.2 From 9f31287b443f30a591539e448fb628e3827a8f61 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 5 Jun 2008 22:46:11 -0700 Subject: uml: remove a duplicate include Removed duplicated include file "kern_util.h" in arch/um/drivers/ubd_kern.c. Signed-off-by: Huang Weiyi Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 44ad160..b58fb89 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,7 +49,6 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "kern_util.h" #include "os.h" #include "mem.h" #include "mem_kern.h" -- cgit v0.10.2 From 40fb16a360d9c6459afee91dc793c1e3374feb94 Mon Sep 17 00:00:00 2001 From: Tom Spink Date: Thu, 5 Jun 2008 22:46:12 -0700 Subject: uml: deal with inaccessible address space start This patch makes os_get_task_size locate the bottom of the address space, as well as the top. This is for systems which put a lower limit on mmap addresses. It works by manually scanning pages from zero onwards until a valid page is found. Because the bottom of the address space may not be zero, it's not sufficient to assume the top of the address space is the size of the address space. The size is the difference between the top address and bottom address. [jdike@addtoit.com: changed the name to reflect that this function is supposed to return the top of the process address space, not its size and changed the return value to reflect that. Also some minor formatting changes] Signed-off-by: Tom Spink Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/include/os.h b/arch/um/include/os.h index e2716ac..db5be46 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -299,6 +299,6 @@ extern int os_arch_prctl(int pid, int code, unsigned long *addr); extern int get_pty(void); /* sys-$ARCH/task_size.c */ -extern unsigned long os_get_task_size(void); +extern unsigned long os_get_top_address(void); #endif diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 9db85b2..8d84250 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -274,7 +274,7 @@ int __init linux_main(int argc, char **argv) if (have_root == 0) add_arg(DEFAULT_COMMAND_LINE); - host_task_size = os_get_task_size(); + host_task_size = os_get_top_address(); /* * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps * out diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c index ccb49b0..be04c1e 100644 --- a/arch/um/os-Linux/sys-i386/task_size.c +++ b/arch/um/os-Linux/sys-i386/task_size.c @@ -63,7 +63,7 @@ static int page_ok(unsigned long page) return ok; } -unsigned long os_get_task_size(void) +unsigned long os_get_top_address(void) { struct sigaction sa, old; unsigned long bottom = 0; @@ -76,9 +76,9 @@ unsigned long os_get_task_size(void) * hosts, but shouldn't hurt otherwise. */ unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT; - unsigned long test; + unsigned long test, original; - printf("Locating the top of the address space ... "); + printf("Locating the bottom of the address space ... "); fflush(stdout); /* @@ -89,16 +89,31 @@ unsigned long os_get_task_size(void) sigemptyset(&sa.sa_mask); sa.sa_flags = SA_NODEFER; if (sigaction(SIGSEGV, &sa, &old)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } - if (!page_ok(bottom)) { - fprintf(stderr, "Address 0x%x no good?\n", - bottom << UM_KERN_PAGE_SHIFT); + /* Manually scan the address space, bottom-up, until we find + * the first valid page (or run out of them). + */ + for (bottom = 0; bottom < top; bottom++) { + if (page_ok(bottom)) + break; + } + + /* If we've got this far, we ran out of pages. */ + if (bottom == top) { + fprintf(stderr, "Unable to determine bottom of address " + "space.\n"); exit(1); } + printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT); + printf("Locating the top of the address space ... "); + fflush(stdout); + + original = bottom; + /* This could happen with a 4G/4G split */ if (page_ok(top)) goto out; @@ -114,7 +129,7 @@ unsigned long os_get_task_size(void) out: /* Restore the old SIGSEGV handling */ if (sigaction(SIGSEGV, &old, NULL)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } top <<= UM_KERN_PAGE_SHIFT; diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c index fad6f57..26a0dd1 100644 --- a/arch/um/os-Linux/sys-x86_64/task_size.c +++ b/arch/um/os-Linux/sys-x86_64/task_size.c @@ -1,4 +1,4 @@ -unsigned long os_get_task_size(unsigned long shift) +unsigned long os_get_top_address(unsigned long shift) { /* The old value of CONFIG_TOP_ADDR */ return 0x7fc0000000; -- cgit v0.10.2 From 8bfd04b974689f700bbd053ad6e66b0a95fb80c9 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:13 -0700 Subject: uml: memcpy export needs to follow host declaration x86_64 defines either memcpy or __memcpy depending on the gcc version, and it looks like UML needs to follow that in its exporting. Cc: Gabriel C Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index 6604673..1db2fce 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -3,5 +3,9 @@ #include /*XXX: we need them because they would be exported by x86_64 */ +#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4 +EXPORT_SYMBOL(memcpy); +#else EXPORT_SYMBOL(__memcpy); +#endif EXPORT_SYMBOL(csum_partial); -- cgit v0.10.2 From 3d5ede6f776bdb1483bcd086f79c3bf41fed3865 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:13 -0700 Subject: uml: stub needs to tolerate SIGWINCH We lost the marking of SIGWINCH as being OK to receive during stub execution, causing a panic should that happen. Cc: Benedict Verheyen Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 6be028c..172ad8f 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -55,7 +55,7 @@ static int ptrace_dump_regs(int pid) * Signals that are OK to receive in the stub - we'll just continue it. * SIGWINCH will happen when UML is inside a detached screen. */ -#define STUB_SIG_MASK (1 << SIGVTALRM) +#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH)) /* Signals that the stub will finish with - anything else is an error */ #define STUB_DONE_MASK (1 << SIGTRAP) -- cgit v0.10.2 From b6d8adf477439e7086224bc9674c6b6638780783 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 5 Jun 2008 22:46:14 -0700 Subject: uml: PATH_MAX needs limits.h Include limits.h to get a definition of PATH_MAX. Signed-off-by: Ingo Molnar Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 74ca7aa..30860b8 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include "kern_constants.h" -- cgit v0.10.2 From 44d1b980c72db0faf35adb082fb2208351803028 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: Fix various old email addresses for dwmw2 Although if people have questions about ARCnet, perhaps it's _better_ for them to be mailing dwmw2@cam.ac.uk about it... Signed-off-by: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt index 770fc41..7960125 100644 --- a/Documentation/networking/arcnet.txt +++ b/Documentation/networking/arcnet.txt @@ -46,7 +46,7 @@ These are the ARCnet drivers for Linux. This new release (2.91) has been put together by David Woodhouse -, in an attempt to tidy up the driver after adding support +, in an attempt to tidy up the driver after adding support for yet another chipset. Now the generic support has been separated from the individual chipset drivers, and the source files aren't quite so packed with #ifdefs! I've changed this file a bit, but kept it in the first person from diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S index 81ba28a..53deeb5 100644 --- a/arch/frv/kernel/cmode.S +++ b/arch/frv/kernel/cmode.S @@ -1,7 +1,7 @@ /* cmode.S: clock mode management * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S index c9b2d51..f67bf73 100644 --- a/arch/frv/kernel/sleep.S +++ b/arch/frv/kernel/sleep.S @@ -1,7 +1,7 @@ /* sleep.S: power saving mode entry * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 4985466..64ee58d 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -1,7 +1,7 @@ /* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 4747490..c5030f9 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -295,5 +295,5 @@ module_init(redboot_parser_init); module_exit(redboot_parser_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse "); +MODULE_AUTHOR("David Woodhouse "); MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables"); diff --git a/fs/afs/callback.c b/fs/afs/callback.c index a78d5b2..587ef51 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -8,7 +8,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Authors: David Woodhouse + * Authors: David Woodhouse * David Howells * */ diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 08db82e..bb47217 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -8,7 +8,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Authors: David Woodhouse + * Authors: David Woodhouse * David Howells * */ diff --git a/fs/afs/super.c b/fs/afs/super.c index 4b572b8..7e3faee 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -10,7 +10,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Authors: David Howells - * David Woodhouse + * David Woodhouse * */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c42bc7f..53ea3dc 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,7 +1,7 @@ /* * linux/include/linux/mtd/nand.h * - * Copyright (c) 2000 David Woodhouse + * Copyright (c) 2000 David Woodhouse * Steven J. Hill * Thomas Gleixner * diff --git a/include/linux/tty.h b/include/linux/tty.h index 7f7121f..324a3b2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -36,7 +36,7 @@ #define N_6PACK 7 #define N_MASC 8 /* Reserved for Mobitex module */ #define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ #define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ #define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ /* cards about SMS messages */ -- cgit v0.10.2 From f2eb432715a81a703e626df59347ba3557009557 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: rtc-ds1374: rename device to just "ds1374" Change the name of the device from "rtc-ds1374" to just "ds1374", to match what all other RTC drivers do. I seem to remember that this name was chosen to avoid possible confusion with an older ds1374 driver, but that driver was removed 3 months ago. Signed-off-by: Jean Delvare Signed-off-by: Alessandro Zummo Acked-by: Kumar Gala Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 3a7054e..019657c11 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -432,7 +432,7 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"dallas,ds1339", "ds1339"}, {"dallas,ds1340", "ds1340"}, {"stm,m41t00", "m41t00"}, - {"dallas,ds1374", "rtc-ds1374"}, + {"dallas,ds1374", "ds1374"}, }; static int __init of_find_i2c_driver(struct device_node *node, diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 715a444..b2ccdcb 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -21,7 +21,6 @@ struct i2c_driver_device { }; static struct i2c_driver_device i2c_devices[] = { - { "dallas,ds1374", "rtc-ds1374" }, }; static int of_find_i2c_driver(struct device_node *node, diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index fa2d2f8..640acd2 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -42,7 +42,7 @@ #define DS1374_REG_TCR 0x09 /* Trickle Charge */ static const struct i2c_device_id ds1374_id[] = { - { "rtc-ds1374", 0 }, + { "ds1374", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1374_id); -- cgit v0.10.2 From 3527fb326f07bc8e85cf66d4f987ebeea24e8e4a Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 5 Jun 2008 22:46:19 -0700 Subject: lib: export bitrev16 Bluetooth will be able to use this. Signed-off-by: Harvey Harrison Cc: Marcel Holtmann Cc: Dave Young Cc: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h index 05e540d..7ffe03f 100644 --- a/include/linux/bitrev.h +++ b/include/linux/bitrev.h @@ -10,6 +10,7 @@ static inline u8 bitrev8(u8 byte) return byte_rev_table[byte]; } +extern u16 bitrev16(u16 in); extern u32 bitrev32(u32 in); #endif /* _LINUX_BITREV_H */ diff --git a/lib/bitrev.c b/lib/bitrev.c index 989aff7..3956203 100644 --- a/lib/bitrev.c +++ b/lib/bitrev.c @@ -42,10 +42,11 @@ const u8 byte_rev_table[256] = { }; EXPORT_SYMBOL_GPL(byte_rev_table); -static __always_inline u16 bitrev16(u16 x) +u16 bitrev16(u16 x) { return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8); } +EXPORT_SYMBOL(bitrev16); /** * bitrev32 - reverse the order of bits in a u32 value -- cgit v0.10.2 From 93b071139a956e51c98cdefd50a47981a4eb852e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 5 Jun 2008 22:46:21 -0700 Subject: introduce memory_read_from_buffer() This patch introduces memory_read_from_buffer(). The only difference between memory_read_from_buffer() and simple_read_from_buffer() is which address space the function copies to. simple_read_from_buffer copies to user space memory. memory_read_from_buffer copies to normal memory. Signed-off-by: Akinobu Mita Cc: Al Viro Cc: Doug Warzecha Cc: Zhang Rui Cc: Matt Domsch Cc: Abhay Salunke Cc: Greg Kroah-Hartman Cc: Markus Rechberger Cc: Kay Sievers Cc: Bob Moore Cc: Thomas Renninger Cc: Len Brown Cc: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Cc: Krzysztof Helt Cc: Geert Uytterhoeven Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Peter Oberparleiter Cc: Michael Holzheu Cc: Brian King Cc: James E.J. Bottomley Cc: Andrew Vasquez Cc: Seokmann Ju Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/libfs.c b/fs/libfs.c index b004dfa..892d41c 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -528,6 +528,23 @@ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, return count; } +ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, + const void *from, size_t available) +{ + loff_t pos = *ppos; + + if (pos < 0) + return -EINVAL; + if (pos >= available) + return 0; + if (count > available - pos) + count = available - pos; + memcpy(to, from + pos, count); + *ppos = pos + count; + + return count; +} + /* * Transaction based IO. * The file expects a single write which triggers the transaction, and then @@ -800,6 +817,7 @@ EXPORT_SYMBOL(simple_statfs); EXPORT_SYMBOL(simple_sync_file); EXPORT_SYMBOL(simple_unlink); EXPORT_SYMBOL(simple_read_from_buffer); +EXPORT_SYMBOL(memory_read_from_buffer); EXPORT_SYMBOL(simple_transaction_get); EXPORT_SYMBOL(simple_transaction_read); EXPORT_SYMBOL(simple_transaction_release); diff --git a/include/linux/fs.h b/include/linux/fs.h index f413085..d490779 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2000,7 +2000,10 @@ extern int simple_fill_super(struct super_block *, int, struct tree_descr *); extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count); extern void simple_release_fs(struct vfsmount **mount, int *count); -extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t); +extern ssize_t simple_read_from_buffer(void __user *to, size_t count, + loff_t *ppos, const void *from, size_t available); +extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, + const void *from, size_t available); #ifdef CONFIG_MIGRATION extern int buffer_migrate_page(struct address_space *, -- cgit v0.10.2 From b66862f7663332aa1ecb3ebda4086360ddb8befc Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:24 -0700 Subject: devcgroup: make a helper to convert cgroup_subsys_state to devs_cgroup This is just picking the container_of out of cgroup_to_devcgroup into a separate function. This new css_to_devcgroup will be used in the 2nd patch. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Cc: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 4ea5836..15f2f80 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -49,10 +49,14 @@ struct dev_cgroup { spinlock_t lock; }; +static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s) +{ + return container_of(s, struct dev_cgroup, css); +} + static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup) { - return container_of(cgroup_subsys_state(cgroup, devices_subsys_id), - struct dev_cgroup, css); + return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id)); } struct cgroup_subsys devices_subsys; -- cgit v0.10.2 From cc9cb219aac24ffc711566c8f372c2b3a3bf840f Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:26 -0700 Subject: devscgroup: relax task to dev_cgroup conversion Two functions, that need to get a device_cgroup from a task (they are devcgroup_inode_permission and devcgroup_inode_mknod) make it in a strange way: They get a css_set from task, then a subsys_state from css_set, then a cgroup from the state and then a subsys_state again from the cgroup. Besides, the devices_subsys_id is read from memory, whilst there's a enum-ed constant for it. Optimize this part a bit: 1. Get the subsys_stats form the task and be done - no 2 extra dereferences, 2. Use the device_subsys_id constant, not the value from memory (i.e. one less dereference). Found while preparing 2.6.26 OpenVZ port. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Acked-by: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 15f2f80..f9941a7 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -506,7 +506,6 @@ struct cgroup_subsys devices_subsys = { int devcgroup_inode_permission(struct inode *inode, int mask) { - struct cgroup *cgroup; struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; @@ -515,8 +514,8 @@ int devcgroup_inode_permission(struct inode *inode, int mask) return 0; if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode)) return 0; - cgroup = task_cgroup(current, devices_subsys.subsys_id); - dev_cgroup = cgroup_to_devcgroup(cgroup); + dev_cgroup = css_to_devcgroup(task_subsys_state(current, + devices_subsys_id)); if (!dev_cgroup) return 0; @@ -547,12 +546,11 @@ acc_check: int devcgroup_inode_mknod(int mode, dev_t dev) { - struct cgroup *cgroup; struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; - cgroup = task_cgroup(current, devices_subsys.subsys_id); - dev_cgroup = cgroup_to_devcgroup(cgroup); + dev_cgroup = css_to_devcgroup(task_subsys_state(current, + devices_subsys_id)); if (!dev_cgroup) return 0; -- cgit v0.10.2 From 7db9cfd380205f6b50afdc3bc3619f876a5eaf0d Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:27 -0700 Subject: devscgroup: check for device permissions at mount time Currently even if a task sits in an all-denied cgroup it can still mount any block device in any mode it wants. Put a proper check in do_open for block device to prevent this. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Tested-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index 7d822fa..470c10c 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -928,9 +929,14 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) { struct module *owner = NULL; struct gendisk *disk; - int ret = -ENXIO; + int ret; int part; + ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode); + if (ret != 0) + return ret; + + ret = -ENXIO; file->f_mapping = bdev->bd_inode->i_mapping; lock_kernel(); disk = get_gendisk(bdev->bd_dev, &part); -- cgit v0.10.2 From d1ee2971f5bd8a16bc5ecfe1b00e14b4fe407c4f Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:28 -0700 Subject: devscgroup: make white list more compact in some cases Consider you added a 'c foo:bar r' permission to some cgroup and then (a bit later) 'c'foo:bar w' for it. After this you'll see the c foo:bar r c foo:bar w lines in a devices.list file. Another example - consider you added 10 'c foo:bar r' permissions to some cgroup (e.g. by mistake). After this you'll see 10 c foo:bar r lines in a list file. This is weird. This situation also has one more annoying consequence. Having many items in a white list makes permissions checking slower, sine it has to walk a longer list. The proposal is to merge permissions for items, that correspond to the same device. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index f9941a7..baf3488 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -106,7 +106,7 @@ free_and_exit: static int dev_whitelist_add(struct dev_cgroup *dev_cgroup, struct dev_whitelist_item *wh) { - struct dev_whitelist_item *whcopy; + struct dev_whitelist_item *whcopy, *walk; whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL); if (!whcopy) @@ -114,7 +114,21 @@ static int dev_whitelist_add(struct dev_cgroup *dev_cgroup, memcpy(whcopy, wh, sizeof(*whcopy)); spin_lock(&dev_cgroup->lock); - list_add_tail(&whcopy->list, &dev_cgroup->whitelist); + list_for_each_entry(walk, &dev_cgroup->whitelist, list) { + if (walk->type != wh->type) + continue; + if (walk->major != wh->major) + continue; + if (walk->minor != wh->minor) + continue; + + walk->access |= wh->access; + kfree(whcopy); + whcopy = NULL; + } + + if (whcopy != NULL) + list_add_tail(&whcopy->list, &dev_cgroup->whitelist); spin_unlock(&dev_cgroup->lock); return 0; } -- cgit v0.10.2 From aae8679b0ebcaa92f99c1c3cb0cd651594a43915 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:31 -0700 Subject: pagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap Fix a bug in add_to_pagemap. Previously, since pm->out was a char *, put_user was only copying 1 byte of every PFN, resulting in the top 7 bytes of each PFN not being copied. By requiring that reads be a multiple of 8 bytes, I can make pm->out and pm->end u64*s instead of char*s, which makes put_user work properly, and also simplifies the logic in add_to_pagemap a bit. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Tuttle Cc: Matt Mackall Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 88717c0..1740362 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -496,7 +496,7 @@ const struct file_operations proc_clear_refs_operations = { }; struct pagemapread { - char __user *out, *end; + u64 __user *out, *end; }; #define PM_ENTRY_BYTES sizeof(u64) @@ -519,21 +519,11 @@ struct pagemapread { static int add_to_pagemap(unsigned long addr, u64 pfn, struct pagemapread *pm) { - /* - * Make sure there's room in the buffer for an - * entire entry. Otherwise, only copy part of - * the pfn. - */ - if (pm->out + PM_ENTRY_BYTES >= pm->end) { - if (copy_to_user(pm->out, &pfn, pm->end - pm->out)) - return -EFAULT; - pm->out = pm->end; - return PM_END_OF_BUFFER; - } - if (put_user(pfn, pm->out)) return -EFAULT; - pm->out += PM_ENTRY_BYTES; + pm->out++; + if (pm->out >= pm->end) + return PM_END_OF_BUFFER; return 0; } @@ -634,7 +624,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, ret = -EINVAL; /* file position must be aligned */ - if (*ppos % PM_ENTRY_BYTES) + if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES)) goto out_task; ret = 0; @@ -664,8 +654,8 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, goto out_pages; } - pm.out = buf; - pm.end = buf + count; + pm.out = (u64 *)buf; + pm.end = (u64 *)(buf + count); if (!ptrace_may_attach(task)) { ret = -EIO; @@ -690,9 +680,9 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, if (ret == PM_END_OF_BUFFER) ret = 0; /* don't need mmap_sem for these, but this looks cleaner */ - *ppos += pm.out - buf; + *ppos += (char *)pm.out - buf; if (!ret) - ret = pm.out - buf; + ret = (char *)pm.out - buf; } out_pages: -- cgit v0.10.2 From 37340746a66e5e7feed5945f28cb75d90a8fd9f6 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 5 Jun 2008 22:46:32 -0700 Subject: cpusets: fix bug when adding nonexistent cpu or mem Adding a nonexistent cpu to a cpuset will be omitted quietly. It should return -EINVAL. Example: (real_nr_cpus <= 4 < NR_CPUS or cpu#4 was just offline) # cat cpus 0-1 # /bin/echo 4 > cpus # /bin/echo $? 0 # cat cpus # The same occurs when add a nonexistent mem. This patch will fix this bug. And when *buf == "", the check is unneeded. Signed-off-by: Lai Jiangshan Acked-by: Paul Jackson Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 86ea9e3..039baa4 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -797,8 +797,10 @@ static int update_cpumask(struct cpuset *cs, char *buf) retval = cpulist_parse(buf, trialcs.cpus_allowed); if (retval < 0) return retval; + + if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map)) + return -EINVAL; } - cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map); retval = validate_change(cs, &trialcs); if (retval < 0) return retval; @@ -932,9 +934,11 @@ static int update_nodemask(struct cpuset *cs, char *buf) retval = nodelist_parse(buf, trialcs.mems_allowed); if (retval < 0) goto done; + + if (!nodes_subset(trialcs.mems_allowed, + node_states[N_HIGH_MEMORY])) + return -EINVAL; } - nodes_and(trialcs.mems_allowed, trialcs.mems_allowed, - node_states[N_HIGH_MEMORY]); oldmem = cs->mems_allowed; if (nodes_equal(oldmem, trialcs.mems_allowed)) { retval = 0; /* Too easy - nothing to do */ -- cgit v0.10.2 From dba6a4d32d8677c99e73798d3375417f8a6d46de Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Thu, 5 Jun 2008 22:46:32 -0700 Subject: keys: remove unused key_alloc_sem This semaphore doesn't appear to be used, so remove it. Signed-off-by: Daniel Walker Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/keys/internal.h b/security/keys/internal.h index 8c05587..b39f5c2 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -78,7 +78,6 @@ extern unsigned key_quota_maxbytes; extern struct rb_root key_serial_tree; extern spinlock_t key_serial_lock; -extern struct semaphore key_alloc_sem; extern struct mutex key_construction_mutex; extern wait_queue_head_t request_key_conswq; -- cgit v0.10.2 From 10732c35dff6c2e15e413e7806a7114a2faa0ecf Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: fbcon: fix wrong vmode bits copied on console switch The interlaced and double line mode bits should not be copied to new console when the console is switched. Otherwise, the new console may be set to incorrect refresh rate. Also, the x and y offsets does not need to be copied. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5fa8b76..97aff8d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2275,9 +2275,7 @@ static int fbcon_switch(struct vc_data *vc) * in fb_set_var() */ info->var.activate = var.activate; - var.yoffset = info->var.yoffset; - var.xoffset = info->var.xoffset; - var.vmode = info->var.vmode; + var.vmode |= info->var.vmode & ~FB_VMODE_MASK; fb_set_var(info, &var); ops->var = info->var; -- cgit v0.10.2 From 879000f94442860e72c934f9e568989bc7fb8ec4 Mon Sep 17 00:00:00 2001 From: CHIKAMA masaki Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: cpufreq: fix null object access on Transmeta CPU If cpu specific cpufreq driver(i.e. longrun) has "setpolicy" function, governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy" function in driver/cpufreq/cpufreq.c . This causes a null object access at "store_scaling_setspeed" and "show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or writing through /sys interface (ex. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed) Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=10654 https://bugzilla.redhat.com/show_bug.cgi?id=443354 Signed-off-by: CHIKAMA Masaki Cc: Dave Jones Cc: Chuck Ebbert Acked-by: Dominik Brodowski Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a24..4e07d1f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -625,7 +625,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, unsigned int freq = 0; unsigned int ret; - if (!policy->governor->store_setspeed) + if (!policy->governor || !policy->governor->store_setspeed) return -EINVAL; ret = sscanf(buf, "%u", &freq); @@ -639,7 +639,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) { - if (!policy->governor->show_setspeed) + if (!policy->governor || !policy->governor->show_setspeed) return sprintf(buf, "\n"); return policy->governor->show_setspeed(policy, buf); -- cgit v0.10.2 From 774533b3e86fa52941c79aa80ab3f0cc511bba7f Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Thu, 5 Jun 2008 22:46:34 -0700 Subject: vt: fix background color on line feed, DEC invert Original report: """I used to force my console to black-on-white by the command `setterm -inversescreen on`. In 2.6.26-rc4, I get lots of black background characters.""" Another addendum to commit c9e587ab. This was previously missed out since I was not aware of what vc_decscnm was for. Signed-off-by: Jan Engelhardt Reported-by: Tested-by: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/vt.c b/drivers/char/vt.c index fa1ffbf..b8b2498 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -434,7 +434,7 @@ static void update_attr(struct vc_data *vc) vc->vc_blink, vc->vc_underline, vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic); vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' '; - vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' '; + vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' '; } /* Note: inverting the screen twice should revert to the original state */ -- cgit v0.10.2 From 68aa0a206a7a2dd8655a50b36e8274eb87b84544 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Thu, 5 Jun 2008 22:46:36 -0700 Subject: ipc: restore MSGPOOL original value When posting: [PATCH 1/8] Scaling msgmni to the amount of lowmem (see http://article.gmane.org/gmane.linux.kernel/637849/) I changed the MSGPOOL value to make it fit what is said in the man pages (i.e. a size in bytes). But Michael Kerrisk rightly complained that this change could affect the ABI. So I'm posting this patch to make MSGPOOL expressed back in Kbytes. Michael, on his side, has fixed the man page. Signed-off-by: Nadia Derbey Cc: Pierre Peiffer Cc: Manfred Spraul Acked-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/msg.h b/include/linux/msg.h index 6f3b8e7..56abf155 100644 --- a/include/linux/msg.h +++ b/include/linux/msg.h @@ -64,11 +64,11 @@ struct msginfo { #define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */ /* unused */ -#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */ +#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */ #define MSGTQL MSGMNB /* number of system message headers */ #define MSGMAP MSGMNB /* number of entries in message map */ #define MSGSSZ 16 /* message segment size */ -#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */ +#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */ #define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff) #ifdef __KERNEL__ -- cgit v0.10.2 From dfcceb26f89da86ec4ac9583c4515504af8c6c84 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Thu, 5 Jun 2008 22:46:38 -0700 Subject: ipc: only output msgmni value at boot time When posting: [PATCH 1/8] Scaling msgmni to the amount of lowmem (see http://lkml.org/lkml/2008/2/11/171), I have added a KERN_INFO message that is output each time msgmni is recomputed. In http://lkml.org/lkml/2008/4/29/575 Tony Luck complained that this message references an ipc namespace address that is useless. I first thought of using an audit_log instead of a printk, as suggested by Serge Hallyn. But unfortunately, we do not have any other information than the namespace address to provide here too. So I chose to move the message and output it only at boot time, removing the reference to the namespace. Signed-off-by: Nadia Derbey Cc: Pierre Peiffer Cc: Manfred Spraul Acked-by: Tony Luck Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/msg.c b/ipc/msg.c index 32494e8..b4eee1c 100644 --- a/ipc/msg.c +++ b/ipc/msg.c @@ -98,20 +98,15 @@ void recompute_msgmni(struct ipc_namespace *ns) if (allowed < MSGMNI) { ns->msg_ctlmni = MSGMNI; - goto out_callback; + return; } if (allowed > IPCMNI / nb_ns) { ns->msg_ctlmni = IPCMNI / nb_ns; - goto out_callback; + return; } ns->msg_ctlmni = allowed; - -out_callback: - - printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n", - ns->msg_ctlmni, ns); } void msg_init_ns(struct ipc_namespace *ns) @@ -136,6 +131,10 @@ void msg_exit_ns(struct ipc_namespace *ns) void __init msg_init(void) { msg_init_ns(&init_ipc_ns); + + printk(KERN_INFO "msgmni has been set to %d\n", + init_ipc_ns.msg_ctlmni); + ipc_init_proc_interface("sysvipc/msg", " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n", IPC_MSG_IDS, sysvipc_msg_proc_show); -- cgit v0.10.2 From 81c6ce9bd3ed3a88caeb9ed97d874450d53339dc Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 5 Jun 2008 22:46:38 -0700 Subject: vt: fix vc_resize locking Lockdep says we can't take tasklist lock or sighand lock inside ctrl_lock. Signed-off-by: Nick Piggin Acked-by: Alan Cox Cc: Oleg Nesterov Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/vt.c b/drivers/char/vt.c index b8b2498..935f1c2 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -909,7 +909,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) if (vc->vc_tty) { struct winsize ws, *cws = &vc->vc_tty->winsize; - unsigned long flags; + struct pid *pgrp = NULL; memset(&ws, 0, sizeof(ws)); ws.ws_row = vc->vc_rows; @@ -917,11 +917,14 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) ws.ws_ypixel = vc->vc_scan_lines; mutex_lock(&vc->vc_tty->termios_mutex); - spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags); - if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) && - vc->vc_tty->pgrp) + spin_lock_irq(&vc->vc_tty->ctrl_lock); + if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) + pgrp = get_pid(vc->vc_tty->pgrp); + spin_unlock_irq(&vc->vc_tty->ctrl_lock); + if (pgrp) { kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1); - spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags); + put_pid(pgrp); + } *cws = ws; mutex_unlock(&vc->vc_tty->termios_mutex); } -- cgit v0.10.2 From 9c81c5c95c00c35a328e1757ca45a66647105f6c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 5 Jun 2008 22:46:39 -0700 Subject: atmel_serial: filter out FP during baud rate detection I made a change to u-boot that used the FP (Fractional Part) field of BRGR to achieve more accurate baud rate generation. Unfortunately, the atmel_serial driver looks at the whole BRGR register when trying to detect the baud rate that the port is currently running at, so setting FP to a nonzero value breaks the baud rate detection. I'll sit on the u-boot patch for a while longer, but this is clearly a bug in the atmel_serial driver which should be fixed. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index c065a70..42be8b01 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, * If the baud rate generator isn't running, the port wasn't * initialized by the boot loader. */ - quot = UART_GET_BRGR(port); + quot = UART_GET_BRGR(port) & ATMEL_US_CD; if (!quot) return; -- cgit v0.10.2 From 3b2d38b48b5abb6921ac6ad2d080ce82887cdbc7 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:41 -0700 Subject: h8300: fix typo in header guard Signed-off-by: Vegard Nossum Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h index 71210d1..5ffdca2 100644 --- a/include/asm-h8300/cacheflush.h +++ b/include/asm-h8300/cacheflush.h @@ -3,7 +3,7 @@ */ #ifndef _ASM_H8300_CACHEFLUSH_H -#define _AMS_H8300_CACHEFLUSH_H +#define _ASM_H8300_CACHEFLUSH_H /* * Cache handling functions -- cgit v0.10.2 From 4fd5a433d4887f0a6c766c258ca335100ffe208a Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:42 -0700 Subject: v850: fix typo in header guard Signed-off-by: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h index 2b622ad..c389691 100644 --- a/include/asm-v850/clinkage.h +++ b/include/asm-v850/clinkage.h @@ -11,7 +11,7 @@ * Written by Miles Bader */ -#ifndef __CLINKAGE_H__ +#ifndef __V850_CLINKAGE_H__ #define __V850_CLINKAGE_H__ #include -- cgit v0.10.2 From 1502cb361666808acb1dfd92238fc2b7a7a48221 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Jun 2008 22:46:42 -0700 Subject: MAINTAINERS: reiserfs entry is out of date Signed-off-by: Alan Cox Cc: Edward Shishkin Cc: Jeff Mahoney Cc: Chris Mason Cc: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 46fa179..ae1dab8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3439,10 +3439,7 @@ L: rtc-linux@googlegroups.com S: Maintained REISERFS FILE SYSTEM -P: Hans Reiser -M: reiserfs-dev@namesys.com L: reiserfs-devel@vger.kernel.org -W: http://www.namesys.com S: Supported RFKILL -- cgit v0.10.2 From 659179b28f15ab1b1db5f8767090f5e728f115a1 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 5 Jun 2008 22:46:44 -0700 Subject: fbdev: export symbol fb_mode_option Frame buffer and mode setting drivers can be built as modules, so fb_mode_option needs to be exported to support these. Prevents this error: ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined! Signed-off-by: Geoff Levand Acked-by: Geert Uytterhoeven Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index d1bbef9..d3c3af5 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -28,6 +28,7 @@ #endif const char *fb_mode_option; +EXPORT_SYMBOL_GPL(fb_mode_option); /* * Standard video mode definitions (taken from XFree86) -- cgit v0.10.2 From 0842b245a8e6c14e3aa49f91018902591d1069b3 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 5 Jun 2008 22:46:45 -0700 Subject: doc: document the kernel-doc conventions for kernel hackers Provide documentation of the kernel-doc documentation conventions oriented to kernel hackers. Since I figure that there will be more people reading this kernel-doc-nano-HOWTO.txt file who are kernel developers focused on the rest of the kernel, than there will be readers of this file who are documentation developers extracting that embedded kernel-doc documentation, I have taken the liberty of making the new section added here: How to format kernel-doc comments the first section of the kernel-doc-nano-HOWTO.txt file. This first section is intended to introduce, motivate and provide basic usage of the kernel-doc mechanism for kernel hackers developing other portions of the kernel. Signed-off-by: Paul Jackson Acked-by: Randy Dunlap Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 2075c06..0bd3274 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -1,6 +1,105 @@ kernel-doc nano-HOWTO ===================== +How to format kernel-doc comments +--------------------------------- + +In order to provide embedded, 'C' friendly, easy to maintain, +but consistent and extractable documentation of the functions and +data structures in the Linux kernel, the Linux kernel has adopted +a consistent style for documenting functions and their parameters, +and structures and their members. + +The format for this documentation is called the kernel-doc format. +It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file. + +This style embeds the documentation within the source files, using +a few simple conventions. The scripts/kernel-doc perl script, some +SGML templates in Documentation/DocBook, and other tools understand +these conventions, and are used to extract this embedded documentation +into various documents. + +In order to provide good documentation of kernel functions and data +structures, please use the following conventions to format your +kernel-doc comments in Linux kernel source. + +We definitely need kernel-doc formatted documentation for functions +that are exported to loadable modules using EXPORT_SYMBOL. + +We also look to provide kernel-doc formatted documentation for +functions externally visible to other kernel files (not marked +"static"). + +We also recommend providing kernel-doc formatted documentation +for private (file "static") routines, for consistency of kernel +source code layout. But this is lower priority and at the +discretion of the MAINTAINER of that kernel source file. + +Data structures visible in kernel include files should also be +documented using kernel-doc formatted comments. + +The opening comment mark "/**" is reserved for kernel-doc comments. +Only comments so marked will be considered by the kernel-doc scripts, +and any comment so marked must be in kernel-doc format. Do not use +"/**" to be begin a comment block unless the comment block contains +kernel-doc formatted comments. The closing comment marker for +kernel-doc comments can be either "*/" or "**/". + +Kernel-doc comments should be placed just before the function +or data structure being described. + +Example kernel-doc function comment: + +/** + * foobar() - short function description of foobar + * @arg1: Describe the first argument to foobar. + * @arg2: Describe the second argument to foobar. + * One can provide multiple line descriptions + * for arguments. + * + * A longer description, with more discussion of the function foobar() + * that might be useful to those using or modifying it. Begins with + * empty comment line, and may include additional embedded empty + * comment lines. + * + * The longer description can have multiple paragraphs. + **/ + +The first line, with the short description, must be on a single line. + +The @argument descriptions must begin on the very next line following +this opening short function description line, with no intervening +empty comment lines. + +Example kernel-doc data structure comment. + +/** + * struct blah - the basic blah structure + * @mem1: describe the first member of struct blah + * @mem2: describe the second member of struct blah, + * perhaps with more lines and words. + * + * Longer description of this structure. + **/ + +The kernel-doc function comments describe each parameter to the +function, in order, with the @name lines. + +The kernel-doc data structure comments describe each structure member +in the data structure, with the @name lines. + +The longer description formatting is "reflowed", losing your line +breaks. So presenting carefully formatted lists within these +descriptions won't work so well; derived documentation will lose +the formatting. + +See the section below "How to add extractable documentation to your +source files" for more details and notes on how to format kernel-doc +comments. + +Components of the kernel-doc system +----------------------------------- + Many places in the source tree have extractable documentation in the form of block comments above functions. The components of this system are: -- cgit v0.10.2 From d100d148aa48df3b6ad526a48624f906695efe60 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 5 Jun 2008 22:46:46 -0700 Subject: nommu: fix ksize() abuse The nommu binfmt code uses ksize() for pointers returned from do_mmap() which is wrong. This converts the call-sites to use the nommu specific kobjsize() function which works as expected. Cc: Christoph Lameter Cc: Matt Mackall Acked-by: Paul Mundt Acked-by: David Howells Signed-off-by: Pekka Enberg Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index ddd35d8..d051a32 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -390,7 +390,7 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, } /* expand the stack mapping to use up the entire allocation granule */ - fullsize = ksize((char *) current->mm->start_brk); + fullsize = kobjsize((char *) current->mm->start_brk); if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size, fullsize, 0, 0))) stack_size = fullsize; diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 3b40d45..2cb1acd 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -548,7 +548,7 @@ static int load_flat_file(struct linux_binprm * bprm, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0); /* Remap to use all availabe slack region space */ if (realdatastart && (realdatastart < (unsigned long)-4096)) { - reallen = ksize((void *)realdatastart); + reallen = kobjsize((void *)realdatastart); if (reallen > len) { realdatastart = do_mremap(realdatastart, len, reallen, MREMAP_FIXED, realdatastart); @@ -600,7 +600,7 @@ static int load_flat_file(struct linux_binprm * bprm, PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0); /* Remap to use all availabe slack region space */ if (textpos && (textpos < (unsigned long) -4096)) { - reallen = ksize((void *)textpos); + reallen = kobjsize((void *)textpos); if (reallen > len) { textpos = do_mremap(textpos, len, reallen, MREMAP_FIXED, textpos); @@ -683,7 +683,7 @@ static int load_flat_file(struct linux_binprm * bprm, */ current->mm->start_brk = datapos + data_len + bss_len; current->mm->brk = (current->mm->start_brk + 3) & ~3; - current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len; + current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len; } if (flags & FLAT_FLAG_KTRACE) @@ -790,7 +790,7 @@ static int load_flat_file(struct linux_binprm * bprm, /* zero the BSS, BRK and stack areas */ memset((void*)(datapos + data_len), 0, bss_len + - (memp + ksize((void *) memp) - stack_len - /* end brk */ + (memp + kobjsize((void *) memp) - stack_len - /* end brk */ libinfo->lib_list[id].start_brk) + /* start brk */ stack_len); -- cgit v0.10.2 From 9bb91784de6618c955994b2d5be332fb68c87ef1 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 5 Jun 2008 22:46:47 -0700 Subject: ext3: fix online resize bug There is a bug when we are trying to verify that the reserve inode's double indirect blocks point back to the primary gdt blocks. The fix is obvious, we need to mod the gdb count by the addr's per block. You can verify this with the following test case dd if=/dev/zero of=disk1 seek=1024 count=1 bs=100M losetup /dev/loop1 disk1 pvcreate /dev/loop1 vgcreate loopvg1 /dev/loop1 lvcreate -l 100%VG loopvg1 -n looplv1 mkfs.ext3 -J size=64 -b 1024 /dev/loopvg1/looplv1 mount /dev/loopvg1/looplv1 /mnt/loop dd if=/dev/zero of=disk2 seek=1024 count=1 bs=50M losetup /dev/loop2 disk2 pvcreate /dev/loop2 vgextend loopvg1 /dev/loop2 lvextend -l 100%VG /dev/loopvg1/looplv1 resize2fs /dev/loopvg1/looplv1 without this patch the resize2fs fails, with it the resize2fs succeeds. Signed-off-by: Josef Bacik Acked-by: Andreas Dilger Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 28cfd0b..77278e9 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -580,7 +580,8 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode, } blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count; + data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count % + EXT3_ADDR_PER_BLOCK(sb)); end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb); /* Get each reserved primary GDT block and verify it holds backups */ -- cgit v0.10.2 From ec0ced156f930aba24e7527905de294ad929ef65 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 22:46:48 -0700 Subject: asm-m32r/uaccess.h must #include This patch fixes the following compile error caused by commit 4016a1390d07f15b267eecb20e76a48fd5c524ef (mm/nommu.c: return 0 from kobjsize with invalid objects): /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c: In function 'kobjsize': /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: 'memory_end' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: for each function it appears in.) The patch also removes now no longer required memory_{start,end} declarations inside access_ok(). Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Cc: Hirokazu Takata Cc: Michael Hennerich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h index bd8c837..1c7047b 100644 --- a/include/asm-m32r/uaccess.h +++ b/include/asm-m32r/uaccess.h @@ -14,6 +14,7 @@ #include #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 @@ -106,7 +107,6 @@ static inline void set_fs(mm_segment_t s) #else static inline int access_ok(int type, const void *addr, unsigned long size) { - extern unsigned long memory_start, memory_end; unsigned long val = (unsigned long)addr; return ((val >= memory_start) && ((val + size) < memory_end)); -- cgit v0.10.2 From aabe188565124ee2ed060a072764d6ed34dfa4ed Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:50 -0700 Subject: rtc: class driver for ppc_md RTC functions This hooks up the platform-specific [gs]et_rtc_time functions so that kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms. A new driver, and one which we've been shipping in Fedora for a while already, since otherwise RTC support breaks. [akpm@linux-foundation.org: fix Kconfig indenting] Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras Acked-by: Alessandro Zummo Acked-by: David Brownell Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6cc2c03..60f8afc 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -534,4 +534,12 @@ config RTC_DRV_RS5C313 help If you say yes here you get support for the Ricoh RS5C313 RTC chips. +config RTC_DRV_PPC + tristate "PowerPC machine dependent RTC support" + depends on PPC_MERGE + help + The PowerPC kernel has machine-specific functions for accessing + the RTC. This exposes that functionality through the generic RTC + class. + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 872f1218f..ebe871c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c new file mode 100644 index 0000000..c8e97e2 --- /dev/null +++ b/drivers/rtc/rtc-ppc.c @@ -0,0 +1,69 @@ +/* + * RTC driver for ppc_md RTC functions + * + * © 2007 Red Hat, Inc. + * + * Author: David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include +#include +#include +#include +#include + +static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + ppc_md.get_rtc_time(tm); + return 0; +} + +static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return ppc_md.set_rtc_time(tm); +} + +static const struct rtc_class_ops ppc_rtc_ops = { + .set_time = ppc_rtc_set_time, + .read_time = ppc_rtc_read_time, +}; + +static struct rtc_device *rtc; +static struct platform_device *ppc_rtc_pdev; + +static int __init ppc_rtc_init(void) +{ + if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time) + return -ENODEV; + + ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0); + if (IS_ERR(ppc_rtc_pdev)) + return PTR_ERR(ppc_rtc_pdev); + + rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev, + &ppc_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + platform_device_unregister(ppc_rtc_pdev); + return PTR_ERR(rtc); + } + + return 0; +} + +static void __exit ppc_rtc_exit(void) +{ + rtc_device_unregister(rtc); + platform_device_unregister(ppc_rtc_pdev); +} + +module_init(ppc_rtc_init); +module_exit(ppc_rtc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("Generic RTC class driver for PowerPC"); -- cgit v0.10.2 From aed5417593ad125283f35513573282139a8664b5 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:53 -0700 Subject: proc: calculate the correct /proc/ link count This patch: commit e9720acd728a46cb40daa52c99a979f7c4ff195c Author: Pavel Emelyanov Date: Fri Mar 7 11:08:40 2008 -0800 [NET]: Make /proc/net a symlink on /proc/self/net (v3) introduced a /proc/self/net directory without bumping the corresponding link count for /proc/self. This patch replaces the static link count initializations with a call that counts the number of directory entries in the given pid_entry table whenever it is instantiated, and thus relieves the burden of manually keeping the two in sync. [akpm@linux-foundation.org: cleanup] Acked-by: Eric W. Biederman Cc: Pavel Emelyanov Signed-off-by: Vegard Nossum Cc: "David S. Miller" Cc: Alexey Dobriyan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index c447e07..3b45537 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -127,6 +127,25 @@ struct pid_entry { NULL, &proc_single_file_operations, \ { .proc_show = &proc_##OTYPE } ) +/* + * Count the number of hardlinks for the pid_entry table, excluding the . + * and .. links. + */ +static unsigned int pid_entry_count_dirs(const struct pid_entry *entries, + unsigned int n) +{ + unsigned int i; + unsigned int count; + + count = 0; + for (i = 0; i < n; ++i) { + if (S_ISDIR(entries[i].mode)) + ++count; + } + + return count; +} + int maps_protect; EXPORT_SYMBOL(maps_protect); @@ -2585,10 +2604,9 @@ static struct dentry *proc_pid_instantiate(struct inode *dir, inode->i_op = &proc_tgid_base_inode_operations; inode->i_fop = &proc_tgid_base_operations; inode->i_flags|=S_IMMUTABLE; - inode->i_nlink = 5; -#ifdef CONFIG_SECURITY - inode->i_nlink += 1; -#endif + + inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff, + ARRAY_SIZE(tgid_base_stuff)); dentry->d_op = &pid_dentry_operations; @@ -2816,10 +2834,9 @@ static struct dentry *proc_task_instantiate(struct inode *dir, inode->i_op = &proc_tid_base_inode_operations; inode->i_fop = &proc_tid_base_operations; inode->i_flags|=S_IMMUTABLE; - inode->i_nlink = 4; -#ifdef CONFIG_SECURITY - inode->i_nlink += 1; -#endif + + inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff, + ARRAY_SIZE(tid_base_stuff)); dentry->d_op = &pid_dentry_operations; -- cgit v0.10.2 From a4fa7ef037b17f2a3b9b393cb924e571fc04e784 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 5 Jun 2008 22:46:55 -0700 Subject: hdaps: fix module loading on Thinkpad T61P Adds DMI system identifier for ThinkPad T61. Originally written by Klaus S. Madsen. Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch Signed-off-by: Tim Gardner Signed-off-by: maximilian attems Cc: Klaus S. Madsen Cc: Mark M. Hoffman Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 88e8965..26df06f 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -522,6 +522,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), -- cgit v0.10.2 From bbcdac0c20aa20d1daad41d9c138102b70e5aae4 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:58 -0700 Subject: pagemap: return map count, not reference count, in /proc/kpagecount Since pagemap is all about examining pages mapped into processes' memory spaces, it makes sense for kpagecount to return the map counts, not the reference counts. Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 32dc14c..5a16090 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -726,7 +726,7 @@ static ssize_t kpagecount_read(struct file *file, char __user *buf, if (!ppage) pcount = 0; else - pcount = atomic_read(&ppage->_count); + pcount = page_mapcount(ppage); if (put_user(pcount, out++)) { ret = -EFAULT; -- cgit v0.10.2 From 4710d1ac4c491dd8a28f57946214c0b5fe73cc87 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:58 -0700 Subject: pagemap: return EINVAL, not EIO, for unaligned reads of kpagecount or kpageflags If the user tries to read from a position that is not a multiple of 8, or read a number of bytes that is not a multiple of 8, they have passed an invalid argument to read, for the purpose of reading these files. It's not an IO error because we didn't encounter any trouble finding the data they asked for. Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 5a16090..7e277f2 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -716,7 +716,7 @@ static ssize_t kpagecount_read(struct file *file, char __user *buf, pfn = src / KPMSIZE; count = min_t(size_t, count, (max_pfn * KPMSIZE) - src); if (src & KPMMASK || count & KPMMASK) - return -EIO; + return -EINVAL; while (count > 0) { ppage = NULL; @@ -782,7 +782,7 @@ static ssize_t kpageflags_read(struct file *file, char __user *buf, pfn = src / KPMSIZE; count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src); if (src & KPMMASK || count & KPMMASK) - return -EIO; + return -EINVAL; while (count > 0) { ppage = NULL; -- cgit v0.10.2 From ef421be741a3e56cb89088a7dd4f73cc38739d1b Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:59 -0700 Subject: pagemap: add documentation for pagemap Just a quick explanation of the pagemap interface from a userspace point of view, and an example of how to use it (in English, not code). Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt new file mode 100644 index 0000000..ce72c0f --- /dev/null +++ b/Documentation/vm/pagemap.txt @@ -0,0 +1,77 @@ +pagemap, from the userspace perspective +--------------------------------------- + +pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow +userspace programs to examine the page tables and related information by +reading files in /proc. + +There are three components to pagemap: + + * /proc/pid/pagemap. This file lets a userspace process find out which + physical frame each virtual page is mapped to. It contains one 64-bit + value for each virtual page, containing the following data (from + fs/proc/task_mmu.c, above pagemap_read): + + * Bits 0-55 page frame number (PFN) if present + * Bits 0-4 swap type if swapped + * Bits 5-55 swap offset if swapped + * Bits 55-60 page shift (page size = 1< Date: Thu, 5 Jun 2008 22:47:00 -0700 Subject: vm: add kzalloc_node() inline To get zeroed out memory from a particular NUMA node. To be used by sunrpc. Signed-off-by: Jeff Layton Cc: Christoph Lameter Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/slab.h b/include/linux/slab.h index 805ed4b..c2ad350 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -276,6 +276,17 @@ static inline void *kzalloc(size_t size, gfp_t flags) return kmalloc(size, flags | __GFP_ZERO); } +/** + * kzalloc_node - allocate zeroed memory from a particular memory node. + * @size: how many bytes of memory are required. + * @flags: the type of memory to allocate (see kmalloc). + * @node: memory node from which to allocate + */ +static inline void *kzalloc_node(size_t size, gfp_t flags, int node) +{ + return kmalloc_node(size, flags | __GFP_ZERO, node); +} + #ifdef CONFIG_SLABINFO extern const struct seq_operations slabinfo_op; ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *); -- cgit v0.10.2 From e693d71b46e64536581bf4884434fc1b8797e96f Mon Sep 17 00:00:00 2001 From: Eli Collins Date: Sun, 1 Jun 2008 20:24:40 -0700 Subject: KVM: VMX: Clear CR4.VMXE in hardware_disable Clear CR4.VMXE in hardware_disable. There's no reason to leave it set after doing a VMXOFF. VMware Workstation 6.5 checks CR4.VMXE as a proxy for whether the CPU is in VMX mode, so leaving VMXE set means we'll refuse to power on. With this change the user can power on after unloading the kvm-intel module. I tested on kvm-67 and kvm-69. Signed-off-by: Eli Collins Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 96445f3..02efbe7 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1036,6 +1036,7 @@ static void hardware_enable(void *garbage) static void hardware_disable(void *garbage) { asm volatile (ASM_VMX_VMXOFF : : : "cc"); + write_cr4(read_cr4() & ~X86_CR4_VMXE); } static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt, -- cgit v0.10.2 From eb4e545d4ac82d9018487edb4419b33b9930c857 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Jun 2008 10:56:35 +0200 Subject: ipwireless: Fix blocked sending Packet sending is driven by two flags, tx_ready and tx_queued. It was possible, that there were queued data for sending and hardware was flagged as blocked but in fact it was not. The tx_queued was indicator but should be really a counter else first fragmented packet resets tx_queued flag, but there may be pending packets which do not get sent. New semantics: tx_ready - set, if hw is ready to send packet, no packet is being transferred right now set the flag right at the place where data are copied into hw memory and not earlier without checking if it was succesful tx_queued - count of enqueued packets, including fragments Tested-by: Michal Rokos Signed-off-by: David Sterba Signed-off-by: Jiri Kosina Signed-off-by: Linus Torvalds diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c index fa9d3c9..ba6340a 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ b/drivers/char/pcmcia/ipwireless/hardware.c @@ -251,10 +251,11 @@ struct ipw_hardware { int init_loops; struct timer_list setup_timer; + /* Flag if hw is ready to send next packet */ int tx_ready; - struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; - /* True if any packets are queued for transmission */ + /* Count of pending packets to be sent */ int tx_queued; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; int rx_bytes_queued; struct list_head rx_queue; @@ -404,6 +405,8 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data, spin_lock_irqsave(&hw->spinlock, flags); + hw->tx_ready = 0; + if (hw->hw_version == HW_VERSION_1) { outw((unsigned short) length, hw->base_port + IODWR); @@ -492,6 +495,7 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) spin_lock_irqsave(&hw->spinlock, flags); list_add(&packet->queue, &hw->tx_queue[0]); + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); } else { if (packet->packet_callback) @@ -949,12 +953,10 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) unsigned long flags; spin_lock_irqsave(&hw->spinlock, flags); - if (hw->tx_queued && hw->tx_ready != 0) { + if (hw->tx_queued && hw->tx_ready) { int priority; struct ipw_tx_packet *packet = NULL; - hw->tx_ready--; - /* Pick a packet */ for (priority = 0; priority < priority_limit; priority++) { if (!list_empty(&hw->tx_queue[priority])) { @@ -963,6 +965,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) struct ipw_tx_packet, queue); + hw->tx_queued--; list_del(&packet->queue); break; @@ -973,6 +976,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) spin_unlock_irqrestore(&hw->spinlock, flags); return 0; } + spin_unlock_irqrestore(&hw->spinlock, flags); /* Send */ @@ -1063,7 +1067,7 @@ static irqreturn_t ipwireless_handle_v1_interrupt(int irq, if (irqn & IR_TXINTR) { ack |= IR_TXINTR; spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); } /* Received data */ @@ -1170,7 +1174,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, if (memrxdone & MEMRX_RX_DONE) { writew(0, &hw->memory_info_regs->memreg_rx_done); spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); tx = 1; } @@ -1234,7 +1238,7 @@ static void send_packet(struct ipw_hardware *hw, int priority, spin_lock_irqsave(&hw->spinlock, flags); list_add_tail(&packet->queue, &hw->tx_queue[priority]); - hw->tx_queued = 1; + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); flush_packets_to_hw(hw); -- cgit v0.10.2 From 8d2d73b9a5c35f2c6abf427afba7888cfc4cc65d Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 4 Jun 2008 18:42:24 +0300 Subject: KVM: MMU: reschedule during shadow teardown Shadows for large guests can take a long time to tear down, so reschedule occasionally to avoid softlockup warnings. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 7246b60..c2fd6a4 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1858,6 +1858,7 @@ static void free_mmu_pages(struct kvm_vcpu *vcpu) sp = container_of(vcpu->kvm->arch.active_mmu_pages.next, struct kvm_mmu_page, link); kvm_mmu_zap_page(vcpu->kvm, sp); + cond_resched(); } free_page((unsigned long)vcpu->arch.mmu.pae_root); } -- cgit v0.10.2 From ff4b9df877b30b8a371d706d3552999dee450738 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 5 Jun 2008 00:08:11 -0300 Subject: KVM: IOAPIC: only set remote_irr if interrupt was injected There's a bug in the IOAPIC code for level-triggered interrupts. Its relatively easy to trigger by sharing (virtio-blk + usbtablet was the testcase, initially reported by Gerd von Egidy). The "remote_irr" variable is used to indicate accepted but not yet acked interrupts. Its cleared from the EOI handler. Problem is that the EOI handler clears remote_irr unconditionally, even if it reinjected another pending interrupt. In that case, kvm_ioapic_set_irq() proceeds to ioapic_service() which sets remote_irr even if it failed to inject (since the IRR was high due to EOI reinjection). Since the TMR bit has been cleared by the first EOI, the second one fails to clear remote_irr. End result is interrupt line dead. Fix it by setting remote_irr only if a new pending interrupt has been generated (and the TMR bit for vector in question set). Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index 4232fd7..98778cb 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -45,7 +45,7 @@ #else #define ioapic_debug(fmt, arg...) #endif -static void ioapic_deliver(struct kvm_ioapic *vioapic, int irq); +static int ioapic_deliver(struct kvm_ioapic *vioapic, int irq); static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic, unsigned long addr, @@ -89,8 +89,8 @@ static void ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx) pent = &ioapic->redirtbl[idx]; if (!pent->fields.mask) { - ioapic_deliver(ioapic, idx); - if (pent->fields.trig_mode == IOAPIC_LEVEL_TRIG) + int injected = ioapic_deliver(ioapic, idx); + if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG) pent->fields.remote_irr = 1; } if (!pent->fields.trig_mode) @@ -133,7 +133,7 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) } } -static void ioapic_inj_irq(struct kvm_ioapic *ioapic, +static int ioapic_inj_irq(struct kvm_ioapic *ioapic, struct kvm_vcpu *vcpu, u8 vector, u8 trig_mode, u8 delivery_mode) { @@ -143,7 +143,7 @@ static void ioapic_inj_irq(struct kvm_ioapic *ioapic, ASSERT((delivery_mode == IOAPIC_FIXED) || (delivery_mode == IOAPIC_LOWEST_PRIORITY)); - kvm_apic_set_irq(vcpu, vector, trig_mode); + return kvm_apic_set_irq(vcpu, vector, trig_mode); } static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, @@ -186,7 +186,7 @@ static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, return mask; } -static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) +static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq) { u8 dest = ioapic->redirtbl[irq].fields.dest_id; u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode; @@ -195,7 +195,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode; u32 deliver_bitmask; struct kvm_vcpu *vcpu; - int vcpu_id; + int vcpu_id, r = 0; ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x " "vector=%x trig_mode=%x\n", @@ -204,7 +204,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode); if (!deliver_bitmask) { ioapic_debug("no target on destination\n"); - return; + return 0; } switch (delivery_mode) { @@ -216,7 +216,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) vcpu = ioapic->kvm->vcpus[0]; #endif if (vcpu != NULL) - ioapic_inj_irq(ioapic, vcpu, vector, + r = ioapic_inj_irq(ioapic, vcpu, vector, trig_mode, delivery_mode); else ioapic_debug("null lowest prio vcpu: " @@ -234,7 +234,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) deliver_bitmask &= ~(1 << vcpu_id); vcpu = ioapic->kvm->vcpus[vcpu_id]; if (vcpu) { - ioapic_inj_irq(ioapic, vcpu, vector, + r = ioapic_inj_irq(ioapic, vcpu, vector, trig_mode, delivery_mode); } } @@ -246,6 +246,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) delivery_mode); break; } + return r; } void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) -- cgit v0.10.2 From ebb0e6264c7a65c51feb3575e9edb58eab0cf469 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 20 May 2008 16:21:58 +0300 Subject: KVM: MMU: Fix printk() format string Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 156fe10..934c7b6 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -418,7 +418,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, /* mmio */ if (is_error_pfn(pfn)) { - pgprintk("gfn %x is mmio\n", walker.gfn); + pgprintk("gfn %lx is mmio\n", walker.gfn); kvm_release_pfn_clean(pfn); return 1; } -- cgit v0.10.2 From aab2545fdd6641b76af0ae96456c4ca9d1e50dad Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 6 Jun 2008 11:31:39 -0700 Subject: uml: activate_mm: remove the dead PF_BORROWED_MM check use_mm() was changed to use switch_mm() instead of activate_mm(), since then nobody calls (and nobody should call) activate_mm() with PF_BORROWED_MM bit set. As Jeff Dike pointed out, we can also remove the "old != new" check, it is always true. Signed-off-by: Oleg Nesterov Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index b5253e7..0fb3117 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -591,10 +591,6 @@ static void use_mm(struct mm_struct *mm) atomic_inc(&mm->mm_count); tsk->mm = mm; tsk->active_mm = mm; - /* - * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise - * it won't work. Update it accordingly if you change it here - */ switch_mm(active_mm, mm, tsk); task_unlock(tsk); diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h index 6686fc5..54f42e8 100644 --- a/include/asm-um/mmu_context.h +++ b/include/asm-um/mmu_context.h @@ -22,16 +22,10 @@ extern void force_flush_all(void); static inline void activate_mm(struct mm_struct *old, struct mm_struct *new) { /* - * This is called by fs/exec.c and fs/aio.c. In the first case, for an - * exec, we don't need to do anything as we're called from userspace - * and thus going to use a new host PID. In the second, we're called - * from a kernel thread, and thus need to go doing the mmap's on the - * host. Since they're very expensive, we want to avoid that as far as - * possible. + * This is called by fs/exec.c and sys_unshare() + * when the new ->mm is used for the first time. */ - if (old != new && (current->flags & PF_BORROWED_MM)) - __switch_mm(&new->context.id); - + __switch_mm(&new->context.id); arch_dup_mmap(old, new); } -- cgit v0.10.2 From 3c9155106d589584f67b026ec444e69c4a68d7dc Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 20 May 2008 16:21:13 +0300 Subject: KVM: MMU: Fix is_empty_shadow_page() check The check is only looking at one of two possible empty ptes. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index c2fd6a4..ee3f530 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -658,7 +658,7 @@ static int is_empty_shadow_page(u64 *spt) u64 *end; for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++) - if (*pos != shadow_trap_nonpresent_pte) { + if (is_shadow_present_pte(*pos)) { printk(KERN_ERR "%s: %p %llx\n", __func__, pos, *pos); return 0; -- cgit v0.10.2 From 8079ffa0e18baaf2940e52e0c118eef420a473a4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 6 Jun 2008 21:38:37 -0700 Subject: IB/umem: Avoid sign problems when demoting npages to integer On a 64-bit architecture, if ib_umem_get() is called with a size value that is so big that npages is negative when cast to int, then the length of the page list passed to get_user_pages(), namely min_t(int, npages, PAGE_SIZE / sizeof (struct page *)) will be negative, and get_user_pages() will immediately return 0 (at least since 900cf086, "Be more robust about bad arguments in get_user_pages()"). This leads to an infinite loop in ib_umem_get(), since the code boils down to: while (npages) { ret = get_user_pages(...); npages -= ret; } Fix this by taking the minimum as unsigned longs, so that the value of npages is never truncated. The impact of this bug isn't too severe, since the value of npages is checked against RLIMIT_MEMLOCK, so a process would need to have an astronomical limit or have CAP_IPC_LOCK to be able to trigger this, and such a process could already cause lots of mischief. But it does let buggy userspace code cause a kernel lock-up; for example I hit this with code that passes a negative value into a memory registartion function where it is promoted to a huge u64 value. Cc: Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index fe78f7d..a1768db 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -150,7 +150,7 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr, ret = 0; while (npages) { ret = get_user_pages(current, current->mm, cur_base, - min_t(int, npages, + min_t(unsigned long, npages, PAGE_SIZE / sizeof (struct page *)), 1, !umem->writable, page_list, vma_list); -- cgit v0.10.2 From 5bda27235b24146cf870de663141ee4fbfa8a70b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 7 Jun 2008 15:03:01 +0800 Subject: Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index fa4f4e8..5958eec 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -1018,10 +1016,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 9d28415..079389c 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -87,9 +87,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -425,9 +423,7 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ec05b23..13ae495 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -626,10 +624,8 @@ static int __init stamp_init(void) SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9a756d1..671f9d6 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -939,10 +937,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d1682bb..af7c211 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) /* SPI flash chip (m25p16) */ @@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif -static struct spi_board_info bf54x_spi_board_info[] __initdata = { +static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) { @@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -800,10 +799,7 @@ static int __init ezkit_init(void) platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bf54x_spi_board_info, - ARRAY_SIZE(bf54x_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 61d8f76..bc6fede 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { @@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = { .bits_per_word = 8, }; #endif -#endif +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = { .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; +#endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SND_BLACKFIN_AD1836) \ @@ -537,10 +537,7 @@ static int __init ezkit_init(void) SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -- cgit v0.10.2 From 3b8458a9793a92a6ca3cb24e309f19821bf0d8e5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Sat, 7 Jun 2008 15:36:33 +0800 Subject: Blackfin serial driver: fix up tty core set_ldisc API change breakage bug This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 636b687..f20952c 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -813,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_set_ldisc(struct tty_struct *tty) +static void bfin_serial_set_ldisc(struct uart_port *port) { - int line = tty->index; + int line = port->line; unsigned short val; - if (line >= tty->driver->num) + if (line >= port->info->tty->driver->num) return; - switch (tty->ldisc.num) { + switch (port->info->tty->ldisc.num) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); @@ -846,6 +846,7 @@ static struct uart_ops bfin_serial_pops = { .startup = bfin_serial_startup, .shutdown = bfin_serial_shutdown, .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, .type = bfin_serial_type, .release_port = bfin_serial_release_port, .request_port = bfin_serial_request_port, @@ -1186,7 +1187,6 @@ static int __init bfin_serial_init(void) ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { - bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc; ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); -- cgit v0.10.2 From f751aa125d1843ea4a9a264b451fd5b1639fab20 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 8 Jun 2008 21:43:10 +0300 Subject: fat_valid_media() isn't for userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 73f20e58b1d586e9f6d3ddc3aad872829aca7743 ("FAT_VALID_MEDIA(): remove pointless test") wrongly added the new fat_valid_media() function to the userspace-visible part of include/linux/msdos_fs.h Move it to the part of include/linux/msdos_fs.h that is not exported to userspace. Reported-by: Onur Küçük Reported-by: S.ÇaÄŸlar Onur Signed-off-by: Adrian Bunk Acked-by: OGAWA Hirofumi Signed-off-by: Linus Torvalds diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index b03b274..81cd36b 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -57,12 +57,6 @@ #define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */ #define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */ -/* media of boot sector */ -static inline int fat_valid_media(u8 media) -{ - return 0xf8 <= media || media == 0xf0; -} - #define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \ MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x)) @@ -334,6 +328,12 @@ static inline void fatwchar_to16(__u8 *dst, const wchar_t *src, size_t len) #endif } +/* media of boot sector */ +static inline int fat_valid_media(u8 media) +{ + return 0xf8 <= media || media == 0xf0; +} + /* fat/cache.c */ extern void fat_cache_inval_inode(struct inode *inode); extern int fat_get_cluster(struct inode *inode, int cluster, -- cgit v0.10.2 From efa58fbf19fb778a8ad2fd000a6dfa9c75263a37 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 22 May 2008 03:38:28 +1000 Subject: [POWERPC] boot/Makefile CONFIG_ variable fixes This corrects the names of two CONFIG_ variables. Note that the CONFIG_MPC86XADS fix uncovers another bug (with mpc866_ads_defconfig) that will require fixing: <-- snip --> ... arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts" WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index f5e0b2a..d53b84e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -221,8 +221,8 @@ image-$(CONFIG_WARP) += cuImage.warp image-$(CONFIG_YOSEMITE) += cuImage.yosemite # Board ports in arch/powerpc/platform/8xx/Kconfig -image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads -image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ dtbImage.adder875-redboot -- cgit v0.10.2 From 0be234a46596cd19eb56d2cf46836de8221afb6b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 2 Jun 2008 16:22:59 +1000 Subject: [POWERPC] Fix incorrect enabling of VMX when building signal or user context When building a signal or a ucontext, we can incorrectly set the MSR_VEC bit of the kernel pt_regs->msr before returning to userspace if the task -ever- used VMX. This can lead to funny result if that stack used it in the past, then "lost" it (ie. it wasn't enabled after a context switch for example) and then called get_context. It can end up with VMX enabled and the registers containing values from some other task. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index faeb8f2..da7c058 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -87,6 +87,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, #ifdef CONFIG_ALTIVEC elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful); #endif + unsigned long msr = regs->msr; long err = 0; flush_fp_to_thread(current); @@ -102,7 +103,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) * contains valid data. */ - regs->msr |= MSR_VEC; + msr |= MSR_VEC; } /* We always copy to/from vrsave, it's 0 if we don't have or don't * use altivec. @@ -114,6 +115,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, err |= __put_user(&sc->gp_regs, &sc->regs); WARN_ON(!FULL_REGS(regs)); err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); + err |= __put_user(msr, &sc->gp_regs[PT_MSR]); err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); err |= __put_user(signr, &sc->signal); err |= __put_user(handler, &sc->handler); -- cgit v0.10.2 From 420b5eeaee5b877829c4f0a514a5ad21448596af Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 3 Jun 2008 13:36:11 +1000 Subject: [POWERPC] Use dev_set_name in pci_64.c During the next merge window, pci_name()'s return value will become const, so use the new dev_set_name() instead to avoid the warning (from linux-next): arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev': arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type Cc: Kay Sievers Cc: Greg KH Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 5275074..30eedfc 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -189,7 +189,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->cfg_size = pci_cfg_space_size(dev); - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); dev->class = get_int_prop(node, "class-code", 0); dev->revision = get_int_prop(node, "revision-id", 0); -- cgit v0.10.2 From 0d5799449f0f373ca12681d86c941ae464146a37 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 4 Jun 2008 08:30:54 +1000 Subject: [POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n The ehea driver was recently changed[1] to use walk_memory_resource() to detect the system's memory layout. However, walk_memory_resource() is available only when memory hotplug is enabled. So CONFIG_EHEA was made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a network driver to have such a dependency. Make the declaration of walk_memory_resource() and its powerpc implementation (ehea is powerpc-specific) unconditionally available. [1] 48cfb14f8b89d4d5b3df6c16f08b258686fb12ad "ehea: Add DLPAR memory remove support" [2] fb7b6ca2b6b7c23b52be143bdd5f55a23b9780c8 "ehea: Add dependency to Kconfig" Signed-off-by: Nathan Lynch Acked-by: Badari Pulavarty Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f67e118..51f82d8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -151,6 +151,7 @@ out: return ret; } #endif /* CONFIG_MEMORY_HOTREMOVE */ +#endif /* CONFIG_MEMORY_HOTPLUG */ /* * walk_memory_resource() needs to make sure there is no holes in a given @@ -184,8 +185,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } EXPORT_SYMBOL_GPL(walk_memory_resource); -#endif /* CONFIG_MEMORY_HOTPLUG */ - void show_mem(void) { unsigned long total = 0, reserved = 0; diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 73e3586..ea9f5ad 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -77,14 +77,6 @@ extern int __add_pages(struct zone *zone, unsigned long start_pfn, extern int __remove_pages(struct zone *zone, unsigned long start_pfn, unsigned long nr_pages); -/* - * Walk through all memory which is registered as resource. - * arg is (start_pfn, nr_pages, private_arg_pointer) - */ -extern int walk_memory_resource(unsigned long start_pfn, - unsigned long nr_pages, void *arg, - int (*func)(unsigned long, unsigned long, void *)); - #ifdef CONFIG_NUMA extern int memory_add_physaddr_to_nid(u64 start); #else @@ -199,6 +191,14 @@ static inline void register_page_bootmem_info_node(struct pglist_data *pgdat) #endif /* ! CONFIG_MEMORY_HOTPLUG */ +/* + * Walk through all memory which is registered as resource. + * arg is (start_pfn, nr_pages, private_arg_pointer) + */ +extern int walk_memory_resource(unsigned long start_pfn, + unsigned long nr_pages, void *arg, + int (*func)(unsigned long, unsigned long, void *)); + extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int remove_memory(u64 start, u64 size); -- cgit v0.10.2 From 60d5019be8acef268f4676d229c490186d338fbc Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 4 Jun 2008 08:31:28 +1000 Subject: [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch Acked-by: Jeff Garzik Acked-by: Yasunori Goto Signed-off-by: Paul Mackerras diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index dd0ec9e..f4182cf 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2426,7 +2426,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. -- cgit v0.10.2 From 576b91873fc012620fae2b33ddae3fee2fa0a4ef Mon Sep 17 00:00:00 2001 From: "Yusuke.Goda" Date: Wed, 4 Jun 2008 19:22:59 +0900 Subject: sh: Add SH7723 SCIF support Signed-off-by: Yusuke Goda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 566ce79..5559a11 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -16,6 +16,21 @@ static struct plat_sci_port sci_platform_data[] = { { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + },{ + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + },{ + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, -- cgit v0.10.2 From 5bde47bc63a9e8ccf9b1542498e266196b307cc2 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 4 Jun 2008 17:16:15 +0900 Subject: sh: Fix compile error SH7763 setup code SH7763's setup code use old DECLARE_INTC_DESC. There was a compile error because of this. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index ae2b222..f189a55 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -291,8 +291,9 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + /* External interrupt pins in IRL mode */ static struct intc_vect irl_vectors[] __initdata = { @@ -324,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 -- cgit v0.10.2 From 77d11ba993bf1258f242b6a4ee0230aec8c6c8a4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 9 Jun 2008 16:00:32 +0900 Subject: usb: r8a66597-hcd: Add support for SH7723 USB host R8A66597 is similar to SH7723 USB 2.0 Host/Function module. In addition, the USB of SH7366 is compatible with SH7723. It can support SH7723 USB host by changing Kconfig. Signed-off-by: Yoshihiro Shimoda Acked-by: Greg Kroah-Hartman Signed-off-by: Paul Mundt diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1ef6df3..228797e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -300,8 +300,8 @@ config USB_R8A66597_HCD module will be called r8a66597-hcd. config SUPERH_ON_CHIP_R8A66597 - boolean "Enable SuperH on-chip USB like the R8A66597" - depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366 + boolean "Enable SuperH on-chip R8A66597 USB" + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) help - Renesas SuperH processor has USB like the R8A66597. - This driver supported processor is SH7366. + This driver enables support for the on-chip R8A66597 in the + SH7366 and SH7723 processors. -- cgit v0.10.2 From b8858eed87f1f19903ad9224f7228cbe7374ac7e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 5 Jun 2008 21:21:04 +0900 Subject: sh: add resource of USB host for SH7723 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 5559a11..a0470f2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -88,9 +88,35 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct resource sh7723_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7723_usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sh7723_usb_host_resources), + .resource = sh7723_usb_host_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &sh7723_usb_host_device, }; static int __init sh7723_devices_setup(void) -- cgit v0.10.2 From e50901338b23cc173f464ff8e0179c4354d16877 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 9 Jun 2008 16:49:43 +0900 Subject: sh: Add -mno-fdpic to default flags. Presently the --fdpic specifier and the --isa matching clash when building with FDPIC toolchains. As we have no interest in building the kernel with --fdpic in the first place, always try to add in -mno-fdpic to the default flags. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 8050b03..fb7b1b1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml +cflags-y += $(call cc-option,-mno-fdpic) + # # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that # support it, while -Wa,-dsp by itself limits the range of usable opcodes -- cgit v0.10.2 From 7b1e8795ebfe1705153d1001f2a899119f4d9012 Mon Sep 17 00:00:00 2001 From: Akio Idehara Date: Mon, 9 Jun 2008 22:46:07 +0900 Subject: [ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb array I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 518b7ca..b0a2a26 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8642,6 +8642,7 @@ static struct hda_verb alc262_sony_unsol_verbs[] = { {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {} }; /* mute/unmute internal speaker according to the hp jack and mute state */ -- cgit v0.10.2 From 4c0283fc561d79a4f94ab48ec37282e15273d1f8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jun 2008 09:58:42 -0700 Subject: IB/core: Remove IB_DEVICE_SEND_W_INV capability flag In 2.6.26, we added some support for send with invalidate work requests, including a device capability flag to indicate whether a device supports such requests. However, the support was incomplete: the completion structure was not extended with a field for the key contained in incoming send with invalidate requests. Full support for memory management extensions (send with invalidate, local invalidate, fast register through a send queue, etc) is planned for 2.6.27. Since send with invalidate is not very useful by itself, just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27, which makes things simpler for applications, since they will not have quite as confusing an array of fine-grained bits to check. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 9a054c6..b1441aeb 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -455,8 +455,7 @@ int __devinit c2_rnic_init(struct c2_dev *c2dev) IB_DEVICE_CURR_QP_STATE_MOD | IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_ZERO_STAG | - IB_DEVICE_MEM_WINDOW | - IB_DEVICE_SEND_W_INV); + IB_DEVICE_MEM_WINDOW); /* Allocate the qptr_array */ c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *)); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 911a661..31d30b1 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -105,7 +105,6 @@ enum ib_device_cap_flags { */ IB_DEVICE_UD_IP_CSUM = (1<<18), IB_DEVICE_UD_TSO = (1<<19), - IB_DEVICE_SEND_W_INV = (1<<21), }; enum ib_atomic_cap { -- cgit v0.10.2 From d5791d13b1d45542895104edf4b09476d5ad24b0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 9 Jun 2008 10:06:24 -0700 Subject: Fix invalid access errors in blk_lookup_devt Commit 30f2f0eb4bd2c43d10a8b0d872c6e5ad8f31c9a0 ("block: do_mounts - accept root=") extended blk_lookup_devt() to be able to look up partitions that had not yet been registered, but in the process made the assumption that the '&block_class.devices' list only contains disk devices and that you can do 'dev_to_disk(dev)' on them. That isn't actually true. The block_class device list also contains the partitions we've discovered so far, and you can't just do a 'dev_to_disk()' on those. So make sure to only work on devices that block/genhd.c has registered itself, something we can test by checking the 'dev->type' member. This makes the loop in blk_lookup_devt() match the other such loops in this file. [ We may want to do an alternate version that knows to handle _either_ whole-disk devices or partitions, but for now this is the minimal fix for a series of crashes reported by Mariusz Kozlowski in http://lkml.org/lkml/2008/5/25/25 and Ingo in http://lkml.org/lkml/2008/6/9/39 ] Reported-by: Mariusz Kozlowski Reported-by: Ingo Molnar Cc: Neil Brown Cc: Joao Luis Meloni Assirati Acked-by: Kay Sievers Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/block/genhd.c b/block/genhd.c index 129ad93..b922d48 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -660,6 +660,8 @@ dev_t blk_lookup_devt(const char *name, int part) mutex_lock(&block_class_lock); list_for_each_entry(dev, &block_class.devices, node) { + if (dev->type != &disk_type) + continue; if (strcmp(dev->bus_id, name) == 0) { struct gendisk *disk = dev_to_disk(dev); -- cgit v0.10.2 From dfa7e20cc0d1a7a620def4dce97de1ae5375f99b Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 9 Jun 2008 11:18:45 -0500 Subject: mm: Minor clean-up of page flags in mm/page_alloc.c Minor source code cleanup of page flags in mm/page_alloc.c. Move the definition of the groups of bits to page-flags.h. The purpose of this clean up is that the next patch will conditionally add a page flag to the groups. Doing that in a header file is cleaner than adding #ifdefs to the C code. Signed-off-by: Russ Anderson Signed-off-by: Linus Torvalds diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 590cff3..f31debf 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -306,5 +306,29 @@ static inline void __ClearPageTail(struct page *page) } #endif /* !PAGEFLAGS_EXTENDED */ + +#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \ + 1 << PG_buddy | 1 << PG_writeback | \ + 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active) + +/* + * Flags checked in bad_page(). Pages on the free list should not have + * these flags set. It they are, there is a problem. + */ +#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty) + +/* + * Flags checked when a page is freed. Pages being freed should not have + * these flags set. It they are, there is a problem. + */ +#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved) + +/* + * Flags checked when a page is prepped for return by the page allocator. + * Pages being prepped should not have these flags set. It they are, there + * is a problem. + */ +#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty) + #endif /* !__GENERATING_BOUNDS_H */ #endif /* PAGE_FLAGS_H */ diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 8e83f02..2f55295 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -237,16 +237,7 @@ static void bad_page(struct page *page) printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n" KERN_EMERG "Backtrace:\n"); dump_stack(); - page->flags &= ~(1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_dirty | - 1 << PG_reclaim | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_buddy ); + page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD; set_page_count(page, 0); reset_page_mapcount(page); page->mapping = NULL; @@ -463,16 +454,7 @@ static inline int free_pages_check(struct page *page) (page->mapping != NULL) | (page_get_page_cgroup(page) != NULL) | (page_count(page) != 0) | - (page->flags & ( - 1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_reserved | - 1 << PG_buddy )))) + (page->flags & PAGE_FLAGS_CHECK_AT_FREE))) bad_page(page); if (PageDirty(page)) __ClearPageDirty(page); @@ -616,17 +598,7 @@ static int prep_new_page(struct page *page, int order, gfp_t gfp_flags) (page->mapping != NULL) | (page_get_page_cgroup(page) != NULL) | (page_count(page) != 0) | - (page->flags & ( - 1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_dirty | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_reserved | - 1 << PG_buddy )))) + (page->flags & PAGE_FLAGS_CHECK_AT_PREP))) bad_page(page); /* -- cgit v0.10.2 From 326f6a5c9c9e1a62aec37bdc0c3f8d53adabe77b Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Fri, 6 Jun 2008 21:26:02 -0700 Subject: [CPUFREQ] Fix format string bug. Format string bug. Not exploitable, as this is only writable by root, but worth fixing all the same. Spotted-by: Ilja van Sprundel Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a24..cc3baf10 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -412,7 +412,7 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, int ret; mutex_unlock(&cpufreq_governor_mutex); - ret = request_module(name); + ret = request_module("%s", name); mutex_lock(&cpufreq_governor_mutex); if (ret == 0) -- cgit v0.10.2 From 56fa18e8f1ef6b3995a4511e61103d0f9205ff4a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 8 Jun 2008 19:43:42 +0400 Subject: power_supply: Fix race in power_supply_uevent Commit 54d29ad33e3483bcc7ca433a21cf294854e5154a (Power Supply: fix race in device_create) introduced a race in power_supply_uevent. Previously it checked that power_supply is available by checking for dev->driver_data. But now dev->driver_data is set before power_supply->dev is initialised. Signed-off-by: Dmitry Baryshkov Signed-off-by: Anton Vorontsov diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c444d6b..49215da 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -201,7 +201,7 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) dev_dbg(dev, "uevent\n"); - if (!psy) { + if (!psy || !psy->dev) { dev_dbg(dev, "No power supply yet\n"); return ret; } -- cgit v0.10.2 From 5e70b7f3c24468bb1635b295945edb48ecd9656a Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Mon, 9 Jun 2008 16:07:28 -0700 Subject: MAINTAINERS: update PPPoE maintainer address Cc: Michal Ostrowski Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 99f5665..cb71eb4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3264,7 +3264,7 @@ S: Maintained PPP OVER ETHERNET P: Michal Ostrowski -M: mostrows@speakeasy.net +M: mostrows@earthlink.net S: Maintained PPP OVER L2TP -- cgit v0.10.2 From 148f1678f0ba7a5e79e44ff23064d4326fa145a4 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 10 Jun 2008 10:03:18 +0200 Subject: [S390] sparsemem: use SPARSEMEM_STATIC if !64BIT. In case of !64BIT kernel we end up with a zero sized mem_section array. This happens because NR_MEM_SECTIONS is smaller than SECTIONS_PER_ROOT but we have: #define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT) and struct mem_section *mem_section[NR_SECTION_ROOTS]; So fix this by selecting SPARSEMEM_STATIC which makes sure that SECTIONS_PER_ROOT is 1. Cc: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 93acb3c..107e492 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -304,6 +304,7 @@ config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_VMEMMAP_ENABLE select SPARSEMEM_VMEMMAP + select SPARSEMEM_STATIC if !64BIT config ARCH_SPARSEMEM_DEFAULT def_bool y -- cgit v0.10.2 From 12829126aa47758608578cc5be3a5adffc3d4b09 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:19 +0200 Subject: [S390] cio: Fix sparse warnings in blacklist.c. sparse complains about signedness: drivers/s390/cio/blacklist.c:132:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:132:28: expected unsigned int *val drivers/s390/cio/blacklist.c:132:28: got int *cssid drivers/s390/cio/blacklist.c:136:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:136:28: expected unsigned int *val drivers/s390/cio/blacklist.c:136:28: got int *ssid drivers/s390/cio/blacklist.c:140:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:140:28: expected unsigned int *val drivers/s390/cio/blacklist.c:140:28: got int *devno cssid, ssid and devno are of course unsigned, so let's make the variables unsigned as well. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index a4a5f2e..0bfcbbe 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -97,8 +97,8 @@ static int pure_hex(char **cp, unsigned int *val, int min_digit, return 0; } -static int parse_busid(char *str, int *cssid, int *ssid, int *devno, - int msgtrigger) +static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid, + unsigned int *devno, int msgtrigger) { char *str_work; int val, rc, ret; @@ -148,7 +148,7 @@ out: static int blacklist_parse_parameters(char *str, range_action action, int msgtrigger) { - int from_cssid, to_cssid, from_ssid, to_ssid, from, to; + unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to; int rc, totalrc; char *parm; range_action ra; -- cgit v0.10.2 From ee0ddadd086e25503f81be551c43f66472300acd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 10 Jun 2008 10:03:20 +0200 Subject: [S390] vmemmap: fix off-by-one bug. If a memory range is supposed to be added to the 1:1 mapping and it ends just below the maximum supported physical address it won't succeed. This is because a test doesn't consider that the end address is 1 smaller than start + size. Fix the comparison. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index f591188..e4868bf 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -236,7 +236,7 @@ static int insert_memory_segment(struct memory_segment *seg) { struct memory_segment *tmp; - if (seg->start + seg->size >= VMEM_MAX_PHYS || + if (seg->start + seg->size > VMEM_MAX_PHYS || seg->start + seg->size < seg->start) return -ERANGE; -- cgit v0.10.2 From 85b0d7c0ad92c47887bf6aeb424a14e7af14bd87 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:21 +0200 Subject: [S390] cio: Fix inverted isc priorities. Priorities for I/O interruption subclasses range from 0 (highest) to 7 (lowest). Unfortunately, the console has been using isc 7 instead of an isc with a higher priority than regular I/O subchannels (which use 3). Fix this by making the console use isc 1. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 82c6a2d..b32d7eb 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -576,12 +576,14 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) err = -ENODEV; goto out; } - if (cio_is_console(sch->schid)) + if (cio_is_console(sch->schid)) { sch->opm = 0xff; - else + sch->isc = 1; + } else { sch->opm = chp_get_sch_opm(sch); + sch->isc = 3; + } sch->lpm = sch->schib.pmcw.pam & sch->opm; - sch->isc = 3; CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X " "- PIM = %02X, PAM = %02X, POM = %02X\n", @@ -704,9 +706,9 @@ void wait_cons_dev(void) if (!console_subchannel_in_use) return; - /* disable all but isc 7 (console device) */ + /* disable all but isc 1 (console device) */ __ctl_store (save_cr6, 6, 6); - cr6 = 0x01000000; + cr6 = 0x40000000; __ctl_load (cr6, 6, 6); do { @@ -788,11 +790,11 @@ cio_probe_console(void) } /* - * enable console I/O-interrupt subclass 7 + * enable console I/O-interrupt subclass 1 */ - ctl_set_bit(6, 24); - console_subchannel.isc = 7; - console_subchannel.schib.pmcw.isc = 7; + ctl_set_bit(6, 30); + console_subchannel.isc = 1; + console_subchannel.schib.pmcw.isc = 1; console_subchannel.schib.pmcw.intparm = (u32)(addr_t)&console_subchannel; ret = cio_modify(&console_subchannel); -- cgit v0.10.2 From 7b439d25300dc59bba76b53eb344bb9e5a1133f2 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Tue, 10 Jun 2008 10:03:22 +0200 Subject: [S390] vt220 console, initialize list head before use This patch fixes a null pointer dereference during initialisation when no sclp event facility is available: sclp vt220 tty driver: could not register vt220 - sclp_register returned -5 Unable to handle kernel paging request at virtual user address 0000000000000000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc3-kvm-bigiron-00968-gd939e93-dirty #30 Process swapper (pid: 0, task: 0000000000600be0, ksp: 000000000064a000) Krnl PSW : 0400000180000000 0000000000320d8c (sclp_unregister+0x48/0x8c) R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 0000000000630478 0700000000649c20 0000000000000000 0000000000433060 000000000064a660 0000000002e26000 00000000006db000 0000000000000000 0000000000a78578 0000000000649b80 0000000000630dc0 000000000044fa20 0000000000320d76 0000000000649b80 Krnl Code: 0000000000320d7c: e310c0080004 lg %r1,8(%r12) 0000000000320d82: b9040032 lgr %r3,%r2 0000000000320d86: c02000187b79 larl %r2,630478 >0000000000320d8c: e34010000024 stg %r4,0(%r1) 0000000000320d92: e31040080024 stg %r1,8(%r4) 0000000000320d98: c01100200200 lgfi %r1,2097664 0000000000320d9e: e310c0080024 stg %r1,8(%r12) 0000000000320da4: c01100100100 lgfi %r1,1048832 Call Trace: ([<0000000000320d76>] sclp_unregister+0x32/0x8c) [<00000000006657b4>] __sclp_vt220_cleanup+0xc4/0xe0 [<000000000066595c>] __sclp_vt220_init+0x18c/0x1a0 [<0000000000665aba>] sclp_vt220_con_init+0x42/0x68 [<00000000006601ca>] console_init+0x4e/0x68 [<000000000064acae>] start_kernel+0x3a2/0x4dc [<0000000000100020>] _stext+0x20/0x80 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000041f964>] _spin_lock_irqsave+0xb0/0xb4 <4>---[ end trace 31fd0ba7d8756001 ]--- The issue is caused by a list_empty() check in __sclp_vt220_cleanup, which usually fails on non-initialized list heads that contain {NULL,NULL} instead. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 62576af..3e577f6 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -773,6 +773,7 @@ sclp_vt220_con_init(void) { int rc; + INIT_LIST_HEAD(&sclp_vt220_register.list); if (!CONSOLE_IS_SCLP) return 0; rc = __sclp_vt220_init(); -- cgit v0.10.2 From 24d3e210c18bfedafe986ec489575cf91ac39d22 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Tue, 10 Jun 2008 10:03:23 +0200 Subject: [S390] Fix build failure in __cpu_up() The first argument to __ctl_store() should be the array to store stuff in, not just the first element of that array. With the current code in __cpu_up(), mainline GCC dies with an internal compiler error. I didn't diagnose that further, but just fixed the kernel bug. Signed-off-by: Segher Boessenkool Signed-off-by: Martin Schwidefsky Cc: Heiko Carstens diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 42b1d12..5d4fa4b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -711,7 +711,7 @@ int __cpuinit __cpu_up(unsigned int cpu) memset(sf, 0, sizeof(struct stack_frame)); sf->gprs[9] = (unsigned long) sf; cpu_lowcore->save_area[15] = (unsigned long) sf; - __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15); + __ctl_store(cpu_lowcore->cregs_save_area, 0, 15); asm volatile( " stam 0,15,0(%0)" : : "a" (&cpu_lowcore->access_regs_save_area) : "memory"); -- cgit v0.10.2 From b57838ea3f860c97e4726ab93abdf83a3d079a66 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 10 Jun 2008 10:03:24 +0200 Subject: [S390] Fix __ctl_load/__ctl_store inline assembly constraints __ctl_load/__ctl_store are called with either an array of unsigned long or a single unsigned long value. Add an address operator to the "m"/"=m" contraints to make them work for unsigned long arguments as well. Signed-off-by: Martin Schwidefsky diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index e0d4500..819e7d9 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -315,14 +315,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) asm volatile( \ " lctlg %1,%2,0(%0)\n" \ : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(array))); \ + "m" (*(addrtype *)(&array))); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ " stctg %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(array)) \ + : "=m" (*(addrtype *)(&array)) \ : "a" (&array), "i" (low), "i" (high)); \ }) @@ -333,14 +333,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) asm volatile( \ " lctl %1,%2,0(%0)\n" \ : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(array))); \ + "m" (*(addrtype *)(&array))); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ " stctl %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(array)) \ + : "=m" (*(addrtype *)(&array)) \ : "a" (&array), "i" (low), "i" (high)); \ }) -- cgit v0.10.2 From 1783e60ff207805a3e75cf522b17ec9bb1604a62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 10 Jun 2008 10:03:25 +0200 Subject: [S390] tape_3590.c: introduce missing kfree The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 8246ef3..42ce791 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1598,7 +1598,7 @@ tape_3590_setup_device(struct tape_device *device) rc = tape_3590_read_dev_chars(device, rdc_data); if (rc) { DBF_LH(3, "Read device characteristics failed!\n"); - goto fail_kmalloc; + goto fail_rdc_data; } rc = tape_std_assign(device); if (rc) -- cgit v0.10.2 From 16882c1e962b4be5122fc05aaf2afc10fd9e2d15 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 8 Jun 2008 21:20:41 +0400 Subject: sched: fix TASK_WAKEKILL vs SIGKILL race schedule() has the special "TASK_INTERRUPTIBLE && signal_pending()" case, this allows us to do current->state = TASK_INTERRUPTIBLE; schedule(); without fear to sleep with pending signal. However, the code like current->state = TASK_KILLABLE; schedule(); is not right, schedule() doesn't take TASK_WAKEKILL into account. This means that mutex_lock_killable(), wait_for_completion_killable(), down_killable(), schedule_timeout_killable() can miss SIGKILL (and btw the second SIGKILL has no effect). Introduce the new helper, signal_pending_state(), and change schedule() to use it. Hopefully it will have more users, that is why the task's state is passed separately. Note this "__TASK_STOPPED | __TASK_TRACED" check in signal_pending_state(). This is needed to preserve the current behaviour (ptrace_notify). I hope this check will be removed soon, but this (afaics good) change needs the separate discussion. The fast path is "(state & (INTERRUPTIBLE | WAKEKILL)) + signal_pending(p)", basically the same that schedule() does now. However, this patch of course bloats schedule(). Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index ae0be3c..c5d3f84 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2026,6 +2026,19 @@ static inline int fatal_signal_pending(struct task_struct *p) return signal_pending(p) && __fatal_signal_pending(p); } +static inline int signal_pending_state(long state, struct task_struct *p) +{ + if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL))) + return 0; + if (!signal_pending(p)) + return 0; + + if (state & (__TASK_STOPPED | __TASK_TRACED)) + return 0; + + return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); +} + static inline int need_resched(void) { return unlikely(test_thread_flag(TIF_NEED_RESCHED)); diff --git a/kernel/sched.c b/kernel/sched.c index bfb8ad8..2c65bf2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4159,12 +4159,10 @@ need_resched_nonpreemptible: clear_tsk_need_resched(prev); if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) { - if (unlikely((prev->state & TASK_INTERRUPTIBLE) && - signal_pending(prev))) { + if (unlikely(signal_pending_state(prev->state, prev))) prev->state = TASK_RUNNING; - } else { + else deactivate_task(rq, prev, 1); - } switch_count = &prev->nvcsw; } -- cgit v0.10.2 From c592713b3e124ce0719e6af4bc2520424c49cbae Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 10 Jun 2008 08:53:39 -0400 Subject: shm: Remove silly double assignment Found a silly double assignment of err is do_shmat. Silly, but good to clean up the useless code. Signed-off-by: Neil Horman Signed-off-by: Linus Torvalds diff --git a/ipc/shm.c b/ipc/shm.c index 554429a..d05f6b5 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -894,8 +894,6 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr) if (!sfd) goto out_put_dentry; - err = -ENOMEM; - file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations); if (!file) goto out_free; -- cgit v0.10.2 From b76916462d990751882eaeadc75ac8c487d6de1d Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide: remove the ide_etrax100 chipset type I forgot to remove the ide_etrax100 chipset type when removing the ETRAX_IDE driver. Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 655ec7e..0bccb63 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1333,8 +1333,7 @@ static void ide_port_init_devices(ide_hwif_t *hwif) static void ide_init_port(ide_hwif_t *hwif, unsigned int port, const struct ide_port_info *d) { - if (d->chipset != ide_etrax100) - hwif->channel = port; + hwif->channel = port; if (d->chipset) hwif->chipset = d->chipset; @@ -1519,7 +1518,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } - if (d->chipset != ide_etrax100 && (i & 1) && mate) { + if ((i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 8d6ad81..55ec7f7 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -63,7 +63,6 @@ static int proc_ide_read_imodel case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } diff --git a/include/linux/ide.h b/include/linux/ide.h index f8f195c..9918772 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -153,7 +153,7 @@ enum { ide_unknown, ide_generic, ide_pci, ide_qd65xx, ide_umc8672, ide_ht6560b, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, - ide_pmac, ide_etrax100, ide_acorn, + ide_pmac, ide_acorn, ide_au1xxx, ide_palm3710 }; -- cgit v0.10.2 From 34e6e88f025ebe0613f53af2703d4d902e39273a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: MAINTAINERS: remove SIS 5513 IDE entry - maintainer has not been active for years - URLs no longer exist - covered by the IDE SUBSYSTEM entry - maintainer email bounces Signed-off-by: Adrian Bunk Cc: Lionel.Bouton@inet6.fr Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/MAINTAINERS b/MAINTAINERS index cb71eb4..e3560df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3658,13 +3658,6 @@ M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained -SIS 5513 IDE CONTROLLER DRIVER -P: Lionel Bouton -M: Lionel.Bouton@inet6.fr -W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html -W: http://gyver.homeip.net/sis5513/index.html -S: Maintained - SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano M: venza@brownhat.org -- cgit v0.10.2 From cd18f69f845dc8c769f0ef65046b7a113b8aba87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: sis5513: add missing pci_enable_device() call Cc: Riccardo Gori Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 4b0b85d..e127eb2 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -569,6 +569,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; if (sis_find_family(dev) == 0) return -ENOTSUPP; -- cgit v0.10.2 From 343a3451e20314d5959b59b992e33fbaadfe52bf Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide-generic: add missing hwif->chipset setup hwif->chipset need to be set properly or ide-generic driver will break once we make a final step in fixing host drivers' dependence on ide_hwifs[]. Problem was catched early thanks to IDE tree exposure in -mm / -next trees and reported by people listed people (thank you guys!). Reported-by: "John Keller" Reported-by: Dmitri Vorobiev Reported-by: Mel Gorman Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index a6073e2..9134488 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -125,6 +125,7 @@ static int __init ide_generic_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io_addr, io_addr + 0x206); hw.irq = ide_default_irq(io_addr); + hw.chipset = ide_generic; ide_init_port_hw(hwif, &hw); idx[i] = i; -- cgit v0.10.2 From d427e836d1d9b58e8f1e648c09b5fbe36e01013b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: ide: fix host drivers missing hwif->chipset initialization ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 713cef2..8e8c281 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -42,6 +42,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports.ctl_addr = aux + (6 * 0x20); hw.irq = irq; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif == NULL) diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 4263ffd..2f311da 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -49,6 +49,7 @@ static int __init ide_arm_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 6a8953f..adbd017 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -55,6 +55,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0bccb63..380fa0c 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1664,6 +1664,7 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, ide_std_init_ports(hw, base, ctl); hw->irq = irq; + hw->chipset = d->chipset; hwif = ide_find_port_slot(d); if (hwif) { diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 5c730e4..9a1d27e 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -138,6 +138,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 9e449a0..af11028 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -81,6 +81,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw) hw->irq = IRQ_MFP_IDE; hw->ack_intr = NULL; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index a9c2593..eb15ca6 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -112,6 +112,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index caa2632..2e84290 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static const char *mac_ide_name[] = diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 6f535d0..8ff6e2d 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static void q40ide_input_data(ide_drive_t *drive, struct request *rq, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index aaf3810..b38a1980 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -747,9 +747,11 @@ static int __init cmd640x_init(void) ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); hw[0].irq = 14; + hw[0].chipset = ide_cmd640; ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; + hw[1].chipset = ide_cmd640; printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index f0e638d..236f9c3 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ @@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_DIRECT */ -- cgit v0.10.2 From 8a7dbb9761d59996e4a037c969eabd8e93f3be1c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: set proper hwif->gendev.parent value hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index b9e4579..5cf5933 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -79,6 +79,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; + hw.dev = &dev->dev; hw.chipset = ide_pci; /* this enables IRQ sharing */ hwif = ide_find_port(); @@ -99,7 +100,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) goto out_disable; pci_set_drvdata(dev, hwif); - hwif->dev = &dev->dev; + drive = &hwif->drives[0]; if (drive->present) { drive->io_32bit = 1; -- cgit v0.10.2 From 1c4d4ad50ac5cc74c605c4a467db42c961ec7a69 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: use struct ide_port_info Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 5cf5933..1b69e4d 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -47,13 +47,18 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info delkin_cb_port_info = { + .port_ops = &delkin_cb_port_ops, + .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | + IDE_HFLAG_NO_DMA, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { unsigned long base; hw_regs_t hw; ide_hwif_t *hwif = NULL; - ide_drive_t *drive; int i, rc; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -90,22 +95,16 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &delkin_cb_port_info); if (!hwif->present) goto out_disable; pci_set_drvdata(dev, hwif); - drive = &hwif->drives[0]; - if (drive->present) { - drive->io_32bit = 1; - drive->unmask = 1; - } return 0; out_disable: -- cgit v0.10.2 From 96fe439ec9ca25b09e1458d86bd739757ae11ea1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 1b69e4d..538f804 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -100,15 +100,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_device_add(idx, &delkin_cb_port_info); - if (!hwif->present) - goto out_disable; - pci_set_drvdata(dev, hwif); return 0; out_disable: - printk(KERN_ERR "delkin_cb: no IDE devices found\n"); pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; -- cgit v0.10.2 From f4084a1d18d618bb360bc72713a3bc2b8375e12f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add missing __init/__exit tags Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 538f804..af0f300 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -135,14 +135,12 @@ static struct pci_driver driver = { .remove = delkin_cb_remove, }; -static int -delkin_cb_init (void) +static int __init delkin_cb_init(void) { return pci_register_driver(&driver); } -static void -delkin_cb_exit (void) +static void __exit delkin_cb_exit(void) { pci_unregister_driver(&driver); } -- cgit v0.10.2 From fb374966ba13ccac341499eaefecd58a96bafb59 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: palm_bk3710: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 96378eb..d024ac8 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -409,9 +409,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_device_add(idx, &palm_bk3710_port_info); - if (!hwif->present) - goto out; - return 0; out: printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); -- cgit v0.10.2 From 513f3c10ddb24b0a261ae96de6f7911ba28713f9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: ide: export ide_doubler This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1204 modules ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index eb15ca6..fed7d81 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -62,7 +63,10 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) + int ide_doubler = 0; /* support IDE doublers? */ +EXPORT_SYMBOL_GPL(ide_doubler); + module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ -- cgit v0.10.2 From efc0fc1c2f37c8c0e43c7616394a979a042b9331 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: fix BLK_DEV_HD_ONLY on ARM dependencies This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering IRQ_HARDDISK, fixing the following compile error on others: <-- snip --> ... CC drivers/ide/legacy/hd.o ... /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function) make[3]: *** [drivers/ide/legacy/hd.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Cc: Russell King Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b4f3aef..1607536 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1028,6 +1028,7 @@ endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two -- cgit v0.10.2 From 6b6707a50c7598a83820077393f8823ab791abf8 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Tue, 10 Jun 2008 12:35:00 -0700 Subject: l2tp: Fix potential memory corruption in pppol2tp_recvmsg() This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: Ilja Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 70cfdb4..f929882 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -783,14 +783,18 @@ static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock, err = 0; skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &err); - if (skb) { - err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data, - skb->len); - if (err < 0) - goto do_skb_free; - err = skb->len; - } -do_skb_free: + if (!skb) + goto end; + + if (len > skb->len) + len = skb->len; + else if (len < skb->len) + msg->msg_flags |= MSG_TRUNC; + + err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len); + if (likely(err == 0)) + err = len; + kfree_skb(skb); end: return err; -- cgit v0.10.2 From 45d465bc237ab1e1ebb4c65b9b318830dafb7509 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 10 Jun 2008 12:37:42 -0700 Subject: ipv4: Remove unused declaration from include/net/tcp.h. - The tcp_unhash() method in /include/net/tcp.h is no more needed, as the unhash method in tcp_prot structure is now inet_unhash (instead of tcp_unhash in the past); see tcp_prot structure in net/ipv4/tcp_ipv4.c. - So, this patch removes tcp_unhash() declaration from include/net/tcp.h Signed-off-by: Rami Rosen Signed-off-by: David S. Miller diff --git a/include/net/tcp.h b/include/net/tcp.h index 633147c..d448310 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -433,7 +433,6 @@ extern struct sk_buff * tcp_make_synack(struct sock *sk, extern int tcp_disconnect(struct sock *sk, int flags); -extern void tcp_unhash(struct sock *sk); /* From syncookies.c */ extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS]; -- cgit v0.10.2 From ce4a7d0d48bbaed78ccbb0bafb9229651a40303a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 10 Jun 2008 12:39:35 -0700 Subject: inet{6}_request_sock: Init ->opt and ->pktopts in the constructor Wei Yongjun noticed that we may call reqsk_free on request sock objects where the opt fields may not be initialized, fix it by introducing inet_reqsk_alloc where we initialize ->opt to NULL and set ->pktopts to NULL in inet6_reqsk_alloc. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 10b666b..cde056e 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -396,8 +396,10 @@ static inline struct request_sock *inet6_reqsk_alloc(struct request_sock_ops *op { struct request_sock *req = reqsk_alloc(ops); - if (req != NULL) + if (req != NULL) { inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req); + inet6_rsk(req)->pktopts = NULL; + } return req; } diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index a42cd63..9fabe5b 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -197,4 +197,14 @@ static inline int inet_iif(const struct sk_buff *skb) return skb->rtable->rt_iif; } +static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops) +{ + struct request_sock *req = reqsk_alloc(ops); + + if (req != NULL) + inet_rsk(req)->opt = NULL; + + return req; +} + #endif /* _INET_SOCK_H */ diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index c22a378..37d27bc 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -589,7 +589,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb) if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) goto drop; - req = reqsk_alloc(&dccp_request_sock_ops); + req = inet_reqsk_alloc(&dccp_request_sock_ops); if (req == NULL) goto drop; @@ -605,7 +605,6 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb) ireq = inet_rsk(req); ireq->loc_addr = ip_hdr(skb)->daddr; ireq->rmt_addr = ip_hdr(skb)->saddr; - ireq->opt = NULL; /* * Step 3: Process LISTEN state diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 9b1129b..f7fe2a5 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -421,7 +421,6 @@ static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb) ireq6 = inet6_rsk(req); ipv6_addr_copy(&ireq6->rmt_addr, &ipv6_hdr(skb)->saddr); ipv6_addr_copy(&ireq6->loc_addr, &ipv6_hdr(skb)->daddr); - ireq6->pktopts = NULL; if (ipv6_opt_accepted(sk, skb) || np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo || diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index 73ba989..d182a2a 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -285,7 +285,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, cookie_check_timestamp(&tcp_opt); ret = NULL; - req = reqsk_alloc(&tcp_request_sock_ops); /* for safety */ + req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */ if (!req) goto out; @@ -301,7 +301,6 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, ireq->rmt_port = th->source; ireq->loc_addr = ip_hdr(skb)->daddr; ireq->rmt_addr = ip_hdr(skb)->saddr; - ireq->opt = NULL; ireq->snd_wscale = tcp_opt.snd_wscale; ireq->rcv_wscale = tcp_opt.rcv_wscale; ireq->sack_ok = tcp_opt.sack_ok; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index cd601a8..4f8485c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1285,7 +1285,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) goto drop; - req = reqsk_alloc(&tcp_request_sock_ops); + req = inet_reqsk_alloc(&tcp_request_sock_ops); if (!req) goto drop; diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index 938ce4e..3ecc115 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -198,7 +198,6 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq = inet_rsk(req); ireq6 = inet6_rsk(req); treq = tcp_rsk(req); - ireq6->pktopts = NULL; if (security_inet_conn_request(sk, skb, req)) { reqsk_free(req); diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 715965f..cb46749 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1299,7 +1299,6 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) treq = inet6_rsk(req); ipv6_addr_copy(&treq->rmt_addr, &ipv6_hdr(skb)->saddr); ipv6_addr_copy(&treq->loc_addr, &ipv6_hdr(skb)->daddr); - treq->pktopts = NULL; if (!want_cookie) TCP_ECN_create_request(req, tcp_hdr(skb)); -- cgit v0.10.2 From b36ffc47a17ab5ce6d9589a99ac5d135c9173a9a Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Tue, 10 Jun 2008 12:46:52 -0700 Subject: drivers/atm/eni.h: remove unused macro KERNEL_OFFSET KERNEL_OFFSET macro in eni.h is not required as it is not used anywhere. Remove the unused macro from eni.h header file. Signed-off-by: Pradeep Singh Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/atm/eni.h b/drivers/atm/eni.h index d04fefb..e4c9525 100644 --- a/drivers/atm/eni.h +++ b/drivers/atm/eni.h @@ -18,7 +18,6 @@ #include "midway.h" -#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */ #define DEV_LABEL "eni" #define UBR_BUFFER (128*1024) /* UBR buffer size */ -- cgit v0.10.2 From 495b36b15e17fb08434e3800959434f06a1a6fbc Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 10 Jun 2008 12:49:31 -0700 Subject: isdn divas: fix proc creation 1. creating proc entry and not saving pointer to PDE and checking it is not going to work. 2. if proc entry wasn't created, no reason to remove it on error path. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c index 5fcbdcc..16a874b 100644 --- a/drivers/isdn/hardware/eicon/divasmain.c +++ b/drivers/isdn/hardware/eicon/divasmain.c @@ -806,7 +806,6 @@ static int DIVA_INIT_FUNCTION divas_init(void) if (!create_divas_proc()) { #ifdef MODULE - remove_divas_proc(); divas_unregister_chrdev(); divasfunc_exit(); #endif diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c index fae8958..0408272 100644 --- a/drivers/isdn/hardware/eicon/divasproc.c +++ b/drivers/isdn/hardware/eicon/divasproc.c @@ -125,8 +125,8 @@ static const struct file_operations divas_fops = { int create_divas_proc(void) { - proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon, - &divas_fops); + divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO, + proc_net_eicon, &divas_fops); if (!divas_proc_entry) return (0); -- cgit v0.10.2 From ea23ec26727b4df97b4965715f0519b6ddc0aa4b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 10 Jun 2008 12:50:14 -0700 Subject: isdn: use simple_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c index 15906d0..484299b 100644 --- a/drivers/isdn/hysdn/hysdn_procconf.c +++ b/drivers/isdn/hysdn/hysdn_procconf.c @@ -207,30 +207,17 @@ hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t /* read conf file -> output card info data */ /*******************************************/ static ssize_t -hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off) +hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off) { char *cp; - int i; - if (file->f_mode & FMODE_READ) { - if (!(cp = file->private_data)) - return (-EFAULT); /* should never happen */ - i = strlen(cp); /* get total string length */ - if (*off < i) { - /* still bytes to transfer */ - cp += *off; /* point to desired data offset */ - i -= *off; /* remaining length */ - if (i > count) - i = count; /* limit length to transfer */ - if (copy_to_user(buf, cp, i)) - return (-EFAULT); /* copy error */ - *off += i; /* adjust offset */ - } else - return (0); - } else - return (-EPERM); /* no permission to read */ - - return (i); + if (!(file->f_mode & FMODE_READ)) + return -EPERM; /* no permission to read */ + + if (!(cp = file->private_data)) + return -EFAULT; /* should never happen */ + + return simple_read_from_buffer(buf, count, off, cp, strlen(cp)); } /* hysdn_conf_read */ /******************/ -- cgit v0.10.2 From 392fdb0e35055b96faa9c1cd6ab537805337cdce Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:07:25 -0700 Subject: net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 58a26a4..d89ccfd 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -341,12 +341,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *relay_po; if (sk->sk_state & PPPOX_BOUND) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - int len = ntohs(ph->length); - skb_pull_rcsum(skb, sizeof(struct pppoe_hdr)); - if (pskb_trim_rcsum(skb, len)) - goto abort_kfree; - ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { relay_po = get_item_by_addr(&po->pppoe_relay); @@ -357,7 +351,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0) goto abort_put; - skb_pull(skb, sizeof(struct pppoe_hdr)); if (!__pppoe_xmit(sk_pppox(relay_po), skb)) goto abort_put; } else { @@ -388,6 +381,7 @@ static int pppoe_rcv(struct sk_buff *skb, { struct pppoe_hdr *ph; struct pppox_sock *po; + int len; if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; @@ -399,10 +393,21 @@ static int pppoe_rcv(struct sk_buff *skb, goto drop; ph = pppoe_hdr(skb); + len = ntohs(ph->length); + + skb_pull_rcsum(skb, sizeof(*ph)); + if (skb->len < len) + goto drop; po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (po != NULL) - return sk_receive_skb(sk_pppox(po), skb, 0); + if (!po) + goto drop; + + if (pskb_trim_rcsum(skb, len)) + goto drop; + + return sk_receive_skb(sk_pppox(po), skb, 0); + drop: kfree_skb(skb); out: @@ -937,12 +942,10 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock, m->msg_namelen = 0; if (skb) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - const int len = ntohs(ph->length); - - error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len); + total_len = min(total_len, skb->len); + error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len); if (error == 0) - error = len; + error = total_len; } kfree_skb(skb); -- cgit v0.10.2 From bc6cffd177f9266af38dba96a2cea06c1e7ff932 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:08:25 -0700 Subject: pppoe: Unshare skb before anything else We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index d89ccfd..bafb69b 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -432,12 +432,12 @@ static int pppoe_disc_rcv(struct sk_buff *skb, if (dev_net(dev) != &init_net) goto abort; - if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) - goto abort; - if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) + goto abort; + ph = pppoe_hdr(skb); if (ph->code != PADT_CODE) goto abort; -- cgit v0.10.2 From 738eca74d1bd3e51180de179b7b74d4e34c4e5a3 Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Tue, 10 Jun 2008 14:13:09 -0700 Subject: sparc: get leo framebuffer working This patch fixes several issues: Use the right openprom device name so the driver is actually loaded. Fix a crash due to unitialized info->pseudo_palette. Put the framebuffer in the proper mode for software rendering. checkpatch cleanups. Hardware acceleration was removed when the driver was rewritten for the new framebuffer API in 2003. Software rendering requires a different framebuffer access mode but that wasn't changed. The driver now works again but is slow. The proper fix is to reintroduce hardware acceleration. Signed-off-by: Robert Reif Signed-off-by: David S. Miller diff --git a/drivers/video/leo.c b/drivers/video/leo.c index 8bc46e9..13fea61 100644 --- a/drivers/video/leo.c +++ b/drivers/video/leo.c @@ -17,8 +17,8 @@ #include #include #include +#include -#include #include #include "sbuslib.h" @@ -33,7 +33,6 @@ static int leo_blank(int, struct fb_info *); static int leo_mmap(struct fb_info *, struct vm_area_struct *); static int leo_ioctl(struct fb_info *, unsigned int, unsigned long); -static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *); /* * Frame buffer operations @@ -43,7 +42,6 @@ static struct fb_ops leo_ops = { .owner = THIS_MODULE, .fb_setcolreg = leo_setcolreg, .fb_blank = leo_blank, - .fb_pan_display = leo_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -78,7 +76,7 @@ static struct fb_ops leo_ops = { #define LEO_CUR_TYPE_CMAP 0x00000050 struct leo_cursor { - u8 xxx0[16]; + u8 xxx0[16]; u32 cur_type; u32 cur_misc; u32 cur_cursxy; @@ -105,7 +103,7 @@ struct leo_lx_krn { struct leo_lc_ss0_krn { u32 misc; - u8 xxx0[0x800-4]; + u8 xxx0[0x800-4]; u32 rev; }; @@ -116,7 +114,7 @@ struct leo_lc_ss0_usr { u32 fontt; u32 extent; u32 src; - u32 dst; + u32 dst; u32 copy; u32 fill; }; @@ -129,8 +127,8 @@ struct leo_lc_ss1_usr { u8 unknown; }; -struct leo_ld { - u8 xxx0[0xe00]; +struct leo_ld_ss0 { + u8 xxx0[0xe00]; u32 csr; u32 wid; u32 wmask; @@ -144,13 +142,13 @@ struct leo_ld { u32 src; /* Copy/Scroll (SS0 only) */ u32 dst; /* Copy/Scroll/Fill (SS0 only) */ u32 extent; /* Copy/Scroll/Fill size (SS0 only) */ - u32 xxx1[3]; + u32 xxx1[3]; u32 setsem; /* SS1 only */ u32 clrsem; /* SS1 only */ u32 clrpick; /* SS1 only */ u32 clrdat; /* SS1 only */ u32 alpha; /* SS1 only */ - u8 xxx2[0x2c]; + u8 xxx2[0x2c]; u32 winbg; u32 planemask; u32 rop; @@ -199,11 +197,12 @@ struct leo_par { static void leo_wait(struct leo_lx_krn __iomem *lx_krn) { int i; - + for (i = 0; - (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000; + (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && + i < 300000; i++) - udelay (1); /* Busy wait at most 0.3 sec */ + udelay(1); /* Busy wait at most 0.3 sec */ return; } @@ -221,7 +220,7 @@ static int leo_setcolreg(unsigned regno, unsigned transp, struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_lx_krn __iomem *lx_krn = par->lx_krn; + struct leo_lx_krn __iomem *lx_krn = par->lx_krn; unsigned long flags; u32 val; int i; @@ -408,7 +407,7 @@ static void leo_wid_put(struct fb_info *info, struct fb_wid_list *wl) leo_wait(lx_krn); for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) { - switch(wi->wi_type) { + switch (wi->wi_type) { case FB_WID_DBL_8: j = (wi->wi_index & 0xf) + 0x40; break; @@ -453,13 +452,12 @@ static void leo_init_wids(struct fb_info *info) wi.wi_index = 1; wi.wi_values [0] = 0x30; leo_wid_put(info, &wl); - } static void leo_switch_from_graph(struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0; + struct leo_ld_ss0 __iomem *ss = par->ld_ss0; unsigned long flags; u32 val; @@ -485,19 +483,13 @@ static void leo_switch_from_graph(struct fb_info *info) val = sbus_readl(&par->lc_ss0_usr->csr); } while (val & 0x20000000); - spin_unlock_irqrestore(&par->lock, flags); -} - -static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) -{ - /* We just use this to catch switches out of - * graphics mode. - */ - leo_switch_from_graph(info); + /* setup screen buffer for cfb_* functions */ + sbus_writel(1, &ss->wid); + sbus_writel(0x00ffffff, &ss->planemask); + sbus_writel(0x310b90, &ss->rop); + sbus_writel(0, &par->lc_ss0_usr->addrspace); - if (var->xoffset || var->yoffset || var->vmode) - return -EINVAL; - return 0; + spin_unlock_irqrestore(&par->lock, flags); } static void leo_init_hw(struct fb_info *info) @@ -542,7 +534,8 @@ static void leo_unmap_regs(struct of_device *op, struct fb_info *info, of_iounmap(&op->resource[0], info->screen_base, 0x800000); } -static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit leo_probe(struct of_device *op, + const struct of_device_id *match) { struct device_node *dp = op->node; struct fb_info *info; @@ -594,8 +587,9 @@ static int __devinit leo_probe(struct of_device *op, const struct of_device_id * !info->screen_base) goto out_unmap_regs; - info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->flags = FBINFO_DEFAULT; info->fbops = &leo_ops; + info->pseudo_palette = par->clut_data; leo_init_wids(info); leo_init_hw(info); @@ -649,7 +643,7 @@ static int __devexit leo_remove(struct of_device *op) static struct of_device_id leo_match[] = { { - .name = "leo", + .name = "SUNW,leo", }, {}, }; -- cgit v0.10.2 From dbdbb87636e882042cbe53d5d4eac94206f8db83 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 10 Jun 2008 21:21:56 +0000 Subject: [CIFS] Fix hang in mount when negprot causes server to kill tcp session Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 28e3d5c..1f34652 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -2,6 +2,11 @@ Version 1.53 ------------ DFS support added (Microsoft Distributed File System client support needed for referrals which enable a hierarchical name space among servers). +Disable temporary caching of mode bits to servers which do not support +storing of mode (e.g. Windows servers, when client mounts without cifsacl +mount option) and add new "dynperm" mount option to enable temporary caching +of mode (enable old behavior). Fix hang on mount caused when server crashes +tcp session during negotiate protocol. Version 1.52 ------------ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d49e274..e8fa46c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -653,6 +653,7 @@ multi_t2_fnd: spin_lock(&GlobalMid_Lock); server->tcpStatus = CifsExiting; spin_unlock(&GlobalMid_Lock); + wake_up_all(&server->response_q); /* don't exit until kthread_stop is called */ set_current_state(TASK_UNINTERRUPTIBLE); -- cgit v0.10.2 From 99c6f60e72f112b57ddb07abb2e5f771ee211f43 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Tue, 10 Jun 2008 14:25:34 -0700 Subject: ipsec: pfkey should ignore events when no listeners When pfkey has no km listeners, it still does a lot of work before finding out there aint nobody out there. If a tree falls in a forest and no one is around to hear it, does it make a sound? In this case it makes a lot of noise: With this short-circuit adding 10s of thousands of SAs using netlink improves performance by ~10%. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/key/af_key.c b/net/key/af_key.c index 9bba7ac..7470e36 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3030,6 +3030,9 @@ static int key_notify_sa_expire(struct xfrm_state *x, struct km_event *c) static int pfkey_send_notify(struct xfrm_state *x, struct km_event *c) { + if (atomic_read(&pfkey_socks_nr) == 0) + return 0; + switch (c->event) { case XFRM_MSG_EXPIRE: return key_notify_sa_expire(x, c); -- cgit v0.10.2 From 79ee9a8b2d328243488fee8b55bfacc822049a2a Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 10 Jun 2008 21:37:02 +0000 Subject: [CIFS] cifs: fix oops on mount when CONFIG_CIFS_DFS_UPCALL is enabled simple "mount -t cifs //xxx /mnt" oopsed on strlen of options http://kerneloops.org/guilty.php?guilty=cifs_get_sb&version=2.6.25-release&start=16711 \ 68&end=1703935&class=oops Signed-off-by: Marcin Slusarz Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 5df93fd..86b4d5f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -97,9 +97,6 @@ cifs_read_super(struct super_block *sb, void *data, { struct inode *inode; struct cifs_sb_info *cifs_sb; -#ifdef CONFIG_CIFS_DFS_UPCALL - int len; -#endif int rc = 0; /* BB should we make this contingent on mount parm? */ @@ -117,15 +114,17 @@ cifs_read_super(struct super_block *sb, void *data, * complex operation (mount), and in case of fail * just exit instead of doing mount and attempting * undo it if this copy fails?*/ - len = strlen(data); - cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); - if (cifs_sb->mountdata == NULL) { - kfree(sb->s_fs_info); - sb->s_fs_info = NULL; - return -ENOMEM; + if (data) { + int len = strlen(data); + cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); + if (cifs_sb->mountdata == NULL) { + kfree(sb->s_fs_info); + sb->s_fs_info = NULL; + return -ENOMEM; + } + strncpy(cifs_sb->mountdata, data, len + 1); + cifs_sb->mountdata[len] = '\0'; } - strncpy(cifs_sb->mountdata, data, len + 1); - cifs_sb->mountdata[len] = '\0'; #endif rc = cifs_mount(sb, cifs_sb, data, devname); -- cgit v0.10.2 From 4db0ee176e256444695ee2d7b004552e82fec987 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Mon, 9 Jun 2008 16:51:06 -0700 Subject: forcedeth: msi interrupts Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: Ayaz Abdulla Cc: Manfred Spraul Cc: Jeff Garzik Cc: Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 9eca97f..2cb2447 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3273,6 +3273,20 @@ static void nv_link_irq(struct net_device *dev) dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name); } +static void nv_msi_workaround(struct fe_priv *np) +{ + + /* Need to toggle the msi irq mask within the ethernet device, + * otherwise, future interrupts will not be detected. + */ + if (np->msi_flags & NV_MSI_ENABLED) { + u8 __iomem *base = np->base; + + writel(0, base + NvRegMSIIrqMask); + writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask); + } +} + static irqreturn_t nv_nic_irq(int foo, void *data) { struct net_device *dev = (struct net_device *) data; @@ -3295,6 +3309,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done(dev); spin_unlock(&np->lock); @@ -3410,6 +3426,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done_optimized(dev, TX_WORK_PER_LOOP); spin_unlock(&np->lock); @@ -3750,6 +3768,8 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data) if (!(events & NVREG_IRQ_TIMER)) return IRQ_RETVAL(0); + nv_msi_workaround(np); + spin_lock(&np->lock); np->intr_test = 1; spin_unlock(&np->lock); -- cgit v0.10.2 From ff68cdbf86f09e602eb2b04e1a7d448a3c3a3b28 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 9 Jun 2008 15:57:17 -0700 Subject: ixgbe: fix typo Define names were accidently transposed. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 6321b05..2f38e84 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -58,8 +58,8 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { - hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES; - hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES; hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; /* PHY ops are filled in by default properly for Fiber only */ -- cgit v0.10.2 From bf4d593479e0a3f349118f9b8c40a6bc37bf1e2e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 01:22:16 +0300 Subject: add missing lance_* exports This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik diff --git a/drivers/net/7990.c b/drivers/net/7990.c index 750a46f..ad6b8a5 100644 --- a/drivers/net/7990.c +++ b/drivers/net/7990.c @@ -506,6 +506,7 @@ int lance_open (struct net_device *dev) return res; } +EXPORT_SYMBOL_GPL(lance_open); int lance_close (struct net_device *dev) { @@ -521,6 +522,7 @@ int lance_close (struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_close); void lance_tx_timeout(struct net_device *dev) { @@ -529,7 +531,7 @@ void lance_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; netif_wake_queue (dev); } - +EXPORT_SYMBOL_GPL(lance_tx_timeout); int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) { @@ -586,6 +588,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_start_xmit); /* taken from the depca driver via a2065.c */ static void lance_load_multicast (struct net_device *dev) @@ -654,6 +657,7 @@ void lance_set_multicast (struct net_device *dev) if (!stopped) netif_start_queue (dev); } +EXPORT_SYMBOL_GPL(lance_set_multicast); #ifdef CONFIG_NET_POLL_CONTROLLER void lance_poll(struct net_device *dev) -- cgit v0.10.2 From 23bdfdd388723b8213f597743b1d4aba0d62de9c Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Mon, 9 Jun 2008 19:34:32 +0100 Subject: sfc: Recover from RX queue flush failure RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d3f749c..790db89 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -733,8 +733,10 @@ void falcon_fini_rx(struct efx_rx_queue *rx_queue) continue; break; } - if (rc) + if (rc) { EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue); + efx_schedule_reset(efx, RESET_TYPE_INVISIBLE); + } /* Remove RX descriptor ring from card */ EFX_ZERO_OWORD(rx_desc_ptr); -- cgit v0.10.2 From 00aaea2f95d73d4e2b5e45cf77c3cbb16c59e87f Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Mon, 9 Jun 2008 15:17:37 +0100 Subject: ehea: set mac address fix eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 287a619..faae01d 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -1766,16 +1766,20 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) mutex_lock(&ehea_bcmc_regs.lock); /* Deregister old MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + if (ret) + goto out_upregs; + } port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) + goto out_upregs; + } ret = 0; -- cgit v0.10.2 From 23cde76d801246a702e7a84c3fe3d655b35c89a1 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:49:00 +1000 Subject: virtio_net: Fix skb->csum_start computation hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: Mark McLoughlin Acked-by: Herbert Xu Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5450eac..9a3b85e 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -94,9 +94,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, BUG_ON(len > MAX_PACKET_LEN); skb_trim(skb, len); - skb->protocol = eth_type_trans(skb, dev); - pr_debug("Receiving skb proto 0x%04x len %i type %i\n", - ntohs(skb->protocol), skb->len, skb->pkt_type); + dev->stats.rx_bytes += skb->len; dev->stats.rx_packets++; @@ -106,6 +104,10 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, goto frame_err; } + skb->protocol = eth_type_trans(skb, dev); + pr_debug("Receiving skb proto 0x%04x len %i type %i\n", + ntohs(skb->protocol), skb->len, skb->pkt_type); + if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { pr_debug("GSO!\n"); switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { -- cgit v0.10.2 From 2506ece0c0bbd2fc19a4827b96dc52ea47e2ce4a Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:49:59 +1000 Subject: virtio: Fix typo in virtio_net_hdr comments Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 9405aa6..38c0571 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -38,7 +38,7 @@ struct virtio_net_hdr #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set __u8 gso_type; __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ - __u16 gso_size; /* Bytes to append to gso_hdr_len per frame */ + __u16 gso_size; /* Bytes to append to hdr_len per frame */ __u16 csum_start; /* Position to start checksumming from */ __u16 csum_offset; /* Offset after that to place checksum */ }; -- cgit v0.10.2 From 14c998f034bdc9a5bfa53bca18fbd0738cbc65e8 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:50:56 +1000 Subject: virtio: virtio_net free transmit skbs in a timer virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9a3b85e..156d76f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,8 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + struct timer_list xmit_free_timer; + /* Number of input buffers, and max we've ever had. */ unsigned int num, max; @@ -240,9 +242,23 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +static void xmit_free(unsigned long data) +{ + struct virtnet_info *vi = (void *)data; + + netif_tx_lock(vi->dev); + + free_old_xmit_skbs(vi); + + if (!skb_queue_empty(&vi->send)) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + netif_tx_unlock(vi->dev); +} + static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) { - int num; + int num, err; struct scatterlist sg[2+MAX_SKB_FRAGS]; struct virtio_net_hdr *hdr; const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest; @@ -285,7 +301,11 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) vnet_hdr_to_sg(sg, skb); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; - return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + if (!err) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + return err; } static void xmit_tasklet(unsigned long data) @@ -456,6 +476,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + err = register_netdev(dev); if (err) { pr_debug("virtio_net: registering device failed\n"); @@ -493,6 +515,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_timer_sync(&vi->xmit_free_timer); + /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { kfree_skb(skb); -- cgit v0.10.2 From 363f15149cfba67d29f1e6a6103dda079f27f3fa Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 8 Jun 2008 20:51:55 +1000 Subject: virtio: use callback on empty in virtio_net virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 156d76f..4452306 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,7 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + /* If we need to free in a timer, this is it. */ struct timer_list xmit_free_timer; /* Number of input buffers, and max we've ever had. */ @@ -51,6 +52,7 @@ struct virtnet_info /* For cleaning up after transmission. */ struct tasklet_struct tasklet; + bool free_in_tasklet; /* Receive & send queues. */ struct sk_buff_head recv; @@ -74,7 +76,7 @@ static void skb_xmit_done(struct virtqueue *svq) /* Suppress further interrupts. */ svq->vq_ops->disable_cb(svq); - /* We were waiting for more output buffers. */ + /* We were probably waiting for more output buffers. */ netif_wake_queue(vi->dev); /* Make sure we re-xmit last_xmit_skb: if there are no more packets @@ -242,6 +244,8 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +/* If the virtio transport doesn't always notify us when all in-flight packets + * are consumed, we fall back to using this function on a timer to free them. */ static void xmit_free(unsigned long data) { struct virtnet_info *vi = (void *)data; @@ -302,7 +306,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); - if (!err) + if (!err && !vi->free_in_tasklet) mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); return err; @@ -317,6 +321,8 @@ static void xmit_tasklet(unsigned long data) vi->svq->vq_ops->kick(vi->svq); vi->last_xmit_skb = NULL; } + if (vi->free_in_tasklet) + free_old_xmit_skbs(vi); netif_tx_unlock_bh(vi->dev); } @@ -457,6 +463,10 @@ static int virtnet_probe(struct virtio_device *vdev) vi->vdev = vdev; vdev->priv = vi; + /* If they give us a callback when all buffers are done, we don't need + * the timer. */ + vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY); + /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); if (IS_ERR(vi->rvq)) { @@ -476,7 +486,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); - setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + if (!vi->free_in_tasklet) + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); err = register_netdev(dev); if (err) { @@ -515,7 +526,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); - del_timer_sync(&vi->xmit_free_timer); + if (!vi->free_in_tasklet) + del_timer_sync(&vi->xmit_free_timer); /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { @@ -540,7 +552,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, - VIRTIO_NET_F_HOST_ECN, + VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY, }; static struct virtio_driver virtio_net = { -- cgit v0.10.2 From e5bd7be56787f8c5042081157fff983bcf0c8a42 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:44 +0200 Subject: qeth: layer 3 Oops in ip event handler The ip event handler may present us non qeth network interfaces. Add qeth card pointer check. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 94a8ead..b041ea8 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2070,7 +2070,7 @@ static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev) card = netdev_priv(dev); else if (rc == QETH_VLAN_CARD) card = netdev_priv(vlan_dev_info(dev)->real_dev); - if (card->options.layer2) + if (card && card->options.layer2) card = NULL; QETH_DBF_TEXT_(TRACE, 4, "%d", rc); return card ; -- cgit v0.10.2 From f06f6f3224afdd7e58207d1f5950f4666c5f095f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 6 Jun 2008 12:37:45 +0200 Subject: qeth: Use ccw_device_get_id(). Get the devno from the ccw device via ccw_device_get_id() instead of parsing the bus_id. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 436bf1f..5a71ae9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1407,12 +1407,6 @@ static void qeth_init_func_level(struct qeth_card *card) } } -static inline __u16 qeth_raw_devno_from_bus_id(char *id) -{ - id += (strlen(id) - 4); - return (__u16) simple_strtoul(id, &id, 16); -} - static int qeth_idx_activate_get_answer(struct qeth_channel *channel, void (*idx_reply_cb)(struct qeth_channel *, struct qeth_cmd_buffer *)) @@ -1468,6 +1462,7 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, __u16 temp; __u8 tmp; int rc; + struct ccw_dev_id temp_devid; card = CARD_FROM_CDEV(channel->ccwdev); @@ -1494,8 +1489,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, &card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH); memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data), &card->info.func_level, sizeof(__u16)); - temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card)); - memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2); + ccw_device_get_id(CARD_DDEV(card), &temp_devid); + memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2); temp = (card->info.cula << 8) + card->info.unit_addr2; memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 86ec50d..d35a74c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -101,19 +101,16 @@ static struct net_device *qeth_l2_netdev_by_devno(unsigned char *read_dev_no) { struct qeth_card *card; struct net_device *ndev; - unsigned char *readno; - __u16 temp_dev_no, card_dev_no; - char *endp; + __u16 temp_dev_no; unsigned long flags; + struct ccw_dev_id read_devid; ndev = NULL; memcpy(&temp_dev_no, read_dev_no, 2); read_lock_irqsave(&qeth_core_card_list.rwlock, flags); list_for_each_entry(card, &qeth_core_card_list.list, list) { - readno = CARD_RDEV_ID(card); - readno += (strlen(readno) - 4); - card_dev_no = simple_strtoul(readno, &endp, 16); - if (card_dev_no == temp_dev_no) { + ccw_device_get_id(CARD_RDEV(card), &read_devid); + if (read_devid.devno == temp_dev_no) { ndev = card->dev; break; } -- cgit v0.10.2 From 14cc21b6770972e5d1487dbf3a2caaf63cae909a Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:46 +0200 Subject: qeth: reduce number of kernel messages Remove unnecessary messages. Write important debug information to s390dbf. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 5a71ae9..f428d75 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -290,9 +290,6 @@ int qeth_set_large_send(struct qeth_card *card, card->dev->features |= NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM; } else { - PRINT_WARN("TSO not supported on %s. " - "large_send set to 'no'.\n", - card->dev->name); card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM); card->options.large_send = QETH_LARGE_SEND_NO; @@ -1433,7 +1430,7 @@ static int qeth_idx_activate_get_answer(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error2 in activating channel rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc); QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1503,7 +1500,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error1 in activating channel. rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n", + rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1653,7 +1651,6 @@ int qeth_send_control_data(struct qeth_card *card, int len, reply = qeth_alloc_reply(card); if (!reply) { - PRINT_WARN("Could not alloc qeth_reply!\n"); return -ENOMEM; } reply->callback = reply_cb; @@ -2607,15 +2604,9 @@ void qeth_queue_input_buffer(struct qeth_card *card, int index) if (newcount < count) { /* we are in memory shortage so we switch back to traditional skb allocation and drop packages */ - if (!atomic_read(&card->force_alloc_skb) && - net_ratelimit()) - PRINT_WARN("Switch to alloc skb\n"); atomic_set(&card->force_alloc_skb, 3); count = newcount; } else { - if ((atomic_read(&card->force_alloc_skb) == 1) && - net_ratelimit()) - PRINT_WARN("Switch to sg\n"); atomic_add_unless(&card->force_alloc_skb, -1, 0); } @@ -3029,7 +3020,7 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { - PRINT_ERR("Invalid size of IP packet " + QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", (elements_needed+elems), skb->len); return 0; @@ -3242,8 +3233,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, * free buffers) to handle eddp context */ if (qeth_eddp_check_buffers_for_context(queue, ctx) < 0) { - if (net_ratelimit()) - PRINT_WARN("eddp tx_dropped 1\n"); rc = -EBUSY; goto out; } @@ -3255,7 +3244,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); if (tmp < 0) { - PRINT_ERR("eddp tx_dropped 2\n"); rc = -EBUSY; goto out; } @@ -3597,8 +3585,6 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) && (!card->options.layer2)) { - PRINT_WARN("SNMP Query MIBS not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* skip 4 bytes (data_len struct member) to get req_len */ @@ -3629,7 +3615,7 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, qeth_snmp_command_cb, (void *)&qinfo); if (rc) - PRINT_WARN("SNMP command failed on %s: (0x%x)\n", + QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n", QETH_CARD_IFNAME(card), rc); else { if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) @@ -3802,8 +3788,8 @@ retry: if (mpno) mpno = min(mpno - 1, QETH_MAX_PORTNO); if (card->info.portno > mpno) { - PRINT_ERR("Device %s does not offer port number %d \n.", - CARD_BUS_ID(card), card->info.portno); + QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d" + "\n.", CARD_BUS_ID(card), card->info.portno); rc = -ENODEV; goto out; } @@ -3980,8 +3966,6 @@ struct sk_buff *qeth_core_get_next_skb(struct qeth_card *card, return skb; no_mem: if (net_ratelimit()) { - PRINT_WARN("No memory for packet received on %s.\n", - QETH_CARD_IFNAME(card)); QETH_DBF_TEXT(TRACE, 2, "noskbmem"); QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card)); } diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c index 822df83..452874e 100644 --- a/drivers/s390/net/qeth_core_offl.c +++ b/drivers/s390/net/qeth_core_offl.c @@ -122,8 +122,8 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (element == 0) return -EBUSY; else { - PRINT_WARN("could only partially fill eddp " - "buffer!\n"); + QETH_DBF_MESSAGE(2, "could only partially fill" + "eddp buffer!\n"); goto out; } } @@ -143,8 +143,6 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (must_refcnt) { must_refcnt = 0; if (qeth_eddp_buf_ref_context(buf, ctx)) { - PRINT_WARN("no memory to create eddp context " - "reference\n"); goto out_check; } } diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 08a50f0..c26e842 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -129,7 +129,6 @@ static ssize_t qeth_dev_portno_store(struct device *dev, portno = simple_strtoul(buf, &tmp, 16); if (portno > QETH_MAX_PORTNO) { - PRINT_WARN("portno 0x%X is out of range\n", portno); return -EINVAL; } @@ -223,8 +222,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, * if though we have to permit priority queueing */ if (card->qdio.no_out_queues == 1) { - PRINT_WARN("Priority queueing disabled due " - "to hardware limitations!\n"); card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; return -EPERM; } @@ -250,7 +247,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } else { - PRINT_WARN("Unknown queueing type '%s'\n", tmp); return -EINVAL; } return count; @@ -291,9 +287,6 @@ static ssize_t qeth_dev_bufcnt_store(struct device *dev, ((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt); if (old_cnt != cnt) { rc = qeth_realloc_buffer_pool(card, cnt); - if (rc) - PRINT_WARN("Error (%d) while setting " - "buffer count.\n", rc); } return count; } @@ -355,7 +348,6 @@ static ssize_t qeth_dev_performance_stats_store(struct device *dev, card->perf_stats.initial_rx_packets = card->stats.rx_packets; card->perf_stats.initial_tx_packets = card->stats.tx_packets; } else { - PRINT_WARN("performance_stats: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -399,7 +391,6 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, newdis = QETH_DISCIPLINE_LAYER2; break; default: - PRINT_WARN("layer2: write 0 or 1 to this file!\n"); return -EINVAL; } @@ -463,7 +454,6 @@ static ssize_t qeth_dev_large_send_store(struct device *dev, } else if (!strcmp(tmp, "TSO")) { type = QETH_LARGE_SEND_TSO; } else { - PRINT_WARN("large_send: invalid mode %s!\n", tmp); return -EINVAL; } if (card->options.large_send == type) @@ -503,8 +493,6 @@ static ssize_t qeth_dev_blkt_store(struct qeth_card *card, if (i <= max_value) { *value = i; } else { - PRINT_WARN("blkt total time: write values between" - " 0 and %d to this file!\n", max_value); return -EINVAL; } return count; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index d35a74c..dd7659c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -131,14 +131,14 @@ static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card, mac = &cmd->data.setdelmac.mac[0]; /* MAC already registered, needed in couple/uncouple case */ if (cmd->hdr.return_code == 0x2005) { - PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \ + QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x " "already existing on %s \n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card)); cmd->hdr.return_code = 0; } if (cmd->hdr.return_code) - PRINT_ERR("Could not set group MAC " \ + QETH_DBF_MESSAGE(2, "Could not set group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -163,7 +163,7 @@ static int qeth_l2_send_delgroupmac_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) data; mac = &cmd->data.setdelmac.mac[0]; if (cmd->hdr.return_code) - PRINT_ERR("Could not delete group MAC " \ + QETH_DBF_MESSAGE(2, "Could not delete group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -183,10 +183,8 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC); - if (!mc) { - PRINT_ERR("no mem vor mc mac address\n"); + if (!mc) return; - } memcpy(mc->mc_addr, mac, OSA_ADDR_LEN); mc->mc_addrlen = OSA_ADDR_LEN; @@ -277,7 +275,7 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, QETH_DBF_TEXT(TRACE, 2, "L2sdvcb"); cmd = (struct qeth_ipa_cmd *) data; if (cmd->hdr.return_code) { - PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. " + QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. " "Continuing\n", cmd->data.setdelvlan.vlan_id, QETH_CARD_IFNAME(card), cmd->hdr.return_code); QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command); @@ -330,8 +328,6 @@ static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) spin_lock_bh(&card->vlanlock); list_add_tail(&id->list, &card->vid_list); spin_unlock_bh(&card->vlanlock); - } else { - PRINT_ERR("no memory for vid\n"); } } @@ -547,16 +543,15 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_query_setadapterparms(card); if (rc) { - PRINT_WARN("could not query adapter parameters on device %s: " - "x%x\n", CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "could not query adapter parameters on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); } if (card->info.guestlan) { rc = qeth_setadpparms_change_macaddr(card); if (rc) { - PRINT_WARN("couldn't get MAC address on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "couldn't get MAC address on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); return rc; } @@ -582,8 +577,6 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) } if (card->info.type == QETH_CARD_TYPE_OSN) { - PRINT_WARN("Setting MAC address on %s is not supported.\n", - dev->name); QETH_DBF_TEXT(TRACE, 3, "setmcOSN"); return -EOPNOTSUPP; } @@ -663,7 +656,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { @@ -1152,7 +1145,7 @@ static int qeth_osn_send_control_data(struct qeth_card *card, int len, (addr_t) iob, 0, 0); spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); if (rc) { - PRINT_WARN("qeth_osn_send_control_data: " + QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: " "ccw_device_start rc = %i\n", rc); QETH_DBF_TEXT_(TRACE, 2, " err%d", rc); qeth_release_buffer(iob->channel, iob); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index b041ea8..de256e4 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -311,7 +311,6 @@ static struct qeth_ipaddr *qeth_l3_get_addr_buffer( addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC); if (addr == NULL) { - PRINT_WARN("Not enough memory to add address\n"); return NULL; } addr->type = QETH_IP_TYPE_NORMAL; @@ -649,15 +648,6 @@ static void qeth_l3_correct_routing_type(struct qeth_card *card, } } out_inval: - PRINT_WARN("Routing type '%s' not supported for interface %s.\n" - "Router status set to 'no router'.\n", - ((*type == PRIMARY_ROUTER)? "primary router" : - (*type == SECONDARY_ROUTER)? "secondary router" : - (*type == PRIMARY_CONNECTOR)? "primary connector" : - (*type == SECONDARY_CONNECTOR)? "secondary connector" : - (*type == MULTICAST_ROUTER)? "multicast router" : - "unknown"), - card->dev->name); *type = NO_ROUTER; } @@ -674,9 +664,9 @@ int qeth_l3_setrouting_v4(struct qeth_card *card) QETH_PROT_IPV4); if (rc) { card->options.route4.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } return rc; } @@ -697,9 +687,9 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) QETH_PROT_IPV6); if (rc) { card->options.route6.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } #endif return rc; @@ -737,7 +727,6 @@ int qeth_l3_add_ipato_entry(struct qeth_card *card, if (!memcmp(ipatoe->addr, new->addr, (ipatoe->proto == QETH_PROT_IPV4)? 4:16) && (ipatoe->mask_bits == new->mask_bits)) { - PRINT_WARN("ipato entry already exists!\n"); rc = -EEXIST; break; } @@ -802,7 +791,6 @@ int qeth_l3_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add VIPA. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -867,7 +855,6 @@ int qeth_l3_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add RXIP. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -1020,23 +1007,23 @@ static int qeth_l3_setadapter_hstr(struct qeth_card *card) IPA_SETADP_SET_BROADCAST_MODE, card->options.broadcast_mode); if (rc) - PRINT_WARN("couldn't set broadcast mode on " + QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); rc = qeth_l3_send_setadp_mode(card, IPA_SETADP_ALTER_MAC_ADDRESS, card->options.macaddr_mode); if (rc) - PRINT_WARN("couldn't set macaddr mode on " + QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); return rc; } if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set broadcast mode, using ALLRINGS " "on device %s:\n", CARD_BUS_ID(card)); if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set macaddr mode, using NONCANONICAL " "on device %s:\n", CARD_BUS_ID(card)); return 0; @@ -2182,8 +2169,6 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, @@ -2191,8 +2176,8 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) no_entries); if (rc) { tmp = rc; - PRINT_WARN("Could not set number of ARP entries on %s: " - "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on " + "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2260,9 +2245,6 @@ static int qeth_l3_arp_query_cb(struct qeth_card *card, qdata->no_entries * uentry_size){ QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM); cmd->hdr.return_code = -ENOMEM; - PRINT_WARN("query ARP user space buffer is too small for " - "the returned number of ARP entries. " - "Aborting query!\n"); goto out_error; } QETH_DBF_TEXT_(TRACE, 4, "anore%i", @@ -2324,8 +2306,6 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/ IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* get size of userspace buffer and mask_bits -> 6 bytes */ @@ -2344,7 +2324,7 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) qeth_l3_arp_query_cb, (void *)&qinfo); if (rc) { tmp = rc; - PRINT_WARN("Error while querying ARP cache on %s: %s " + QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s " "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); if (copy_to_user(udata, qinfo.udata, 4)) @@ -2375,8 +2355,6 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } @@ -2391,10 +2369,9 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (rc) { tmp = rc; qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not add ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s " + "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2417,8 +2394,6 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } memcpy(buf, entry, 12); @@ -2433,10 +2408,9 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, tmp = rc; memset(buf, 0, 16); qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not delete ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s" + " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2456,16 +2430,14 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card) if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD)) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); if (rc) { tmp = rc; - PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n", - QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s " + "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2724,7 +2696,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 08f51fd..ac19937 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -85,7 +85,6 @@ static ssize_t qeth_l3_dev_route_store(struct qeth_card *card, } else if (!strcmp(tmp, "multicast_router")) { route->type = MULTICAST_ROUTER; } else { - PRINT_WARN("Invalid routing type '%s'.\n", tmp); return -EINVAL; } if (((card->state == CARD_STATE_SOFTSETUP) || @@ -137,9 +136,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, return -EINVAL; if (!qeth_is_supported(card, IPA_IPV6)) { - PRINT_WARN("IPv6 not supported for interface %s.\n" - "Routing status no changed.\n", - QETH_CARD_IFNAME(card)); return -ENOTSUPP; } @@ -179,7 +175,6 @@ static ssize_t qeth_l3_dev_fake_broadcast_store(struct device *dev, if ((i == 0) || (i == 1)) card->options.fake_broadcast = i; else { - PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -220,7 +215,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -233,8 +227,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; return count; } else { - PRINT_WARN("broadcast_mode: invalid mode %s!\n", - tmp); return -EINVAL; } return count; @@ -275,7 +267,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -285,7 +276,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, QETH_TR_MACADDR_CANONICAL : QETH_TR_MACADDR_NONCANONICAL; else { - PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -327,7 +317,6 @@ static ssize_t qeth_l3_dev_checksum_store(struct device *dev, else if (!strcmp(tmp, "no_checksumming")) card->options.checksum_type = NO_CHECKSUMMING; else { - PRINT_WARN("Unknown checksumming type '%s'\n", tmp); return -EINVAL; } return count; @@ -382,8 +371,6 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.enabled = 0; } else { - PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -422,8 +409,6 @@ static ssize_t qeth_l3_dev_ipato_invert4_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert4 = 0; } else { - PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -486,13 +471,10 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, /* get address string */ end = strchr(start, '/'); if (!end || (end - start >= 40)) { - PRINT_WARN("Invalid format for ipato_addx/delx. " - "Use /\n"); return -EINVAL; } strncpy(buffer, start, end - start); if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } start = end + 1; @@ -500,7 +482,6 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, if (!strlen(start) || (tmp == start) || (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) { - PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n"); return -EINVAL; } return 0; @@ -520,7 +501,6 @@ static ssize_t qeth_l3_dev_ipato_add_store(const char *buf, size_t count, ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL); if (!ipatoe) { - PRINT_WARN("No memory to allocate ipato entry\n"); return -ENOMEM; } ipatoe->proto = proto; @@ -609,8 +589,6 @@ static ssize_t qeth_l3_dev_ipato_invert6_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert6 = 0; } else { - PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -724,7 +702,6 @@ static int qeth_l3_parse_vipae(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; @@ -891,7 +868,6 @@ static int qeth_l3_parse_rxipe(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; -- cgit v0.10.2 From 345aa66e97e61dccafaaa835e4b20d9b241e187f Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Fri, 6 Jun 2008 12:37:47 +0200 Subject: qeth: Prepare-function to call s390dbf was wrong Prepare-function to call s390dbf was wrong handling variable arguments. This worked as macro but not as function any more. Now using va_list processing. Signed-off-by: Peter Tiedemann Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index f428d75..9a71dae 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3983,15 +3983,17 @@ static void qeth_unregister_dbf_views(void) } } -void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...) +void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...) { char dbf_txt_buf[32]; + va_list args; if (level > (qeth_dbf[dbf_nix].id)->level) return; - snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text); + va_start(args, fmt); + vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args); + va_end(args); debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf); - } EXPORT_SYMBOL_GPL(qeth_dbf_longtext); -- cgit v0.10.2 From d0ec0f549705b7ecfb787f02512606b08fe5b291 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:48 +0200 Subject: qeth: start dev queue after tx drop error In case the xmit function drop out with an error, we have to wake the netdevice queue to start another xmit. Signed-off-by: Frank Blaschka Signed-off-by: Martin Schwidefsky Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index dd7659c..f682f7b 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -721,6 +721,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index de256e4..999552c 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2764,6 +2764,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } -- cgit v0.10.2 From ae6b4d9ab6129467415801f30e487bc141a3f471 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sun, 1 Jun 2008 16:57:11 -0500 Subject: atl1: fix suspend regression Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: Avuton Olrich Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 6ddc911..99e0b4c 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -637,22 +637,6 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) } /* - * Force the PHY into power saving mode using vendor magic. - */ -#ifdef CONFIG_PM -static void atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ - atl1_write_phy_reg(hw, MII_DBG_ADDR, 0); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 2); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 3); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0); - -} -#endif - -/* * Resets the PHY and make all config validate * hw - Struct containing variables accessed by shared code * @@ -2860,7 +2844,6 @@ disable_wol: ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); ioread32(hw->hw_addr + REG_PCIE_PHYMISC); - atl1_phy_enter_power_saving(hw); hw->phy_configured = false; pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); exit: -- cgit v0.10.2 From 69de8d23d10694bdd63fe715b98e1a61c56ed288 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e..b5c1e66 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v0.10.2 From 68c2889834602f6efed195f44439ef5d526683a8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 31 May 2008 16:52:52 +0100 Subject: sky2: Hold RTNL while calling dev_close() dev_close() must be called holding the RTNL. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3bb6053..62436b3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4404,7 +4404,9 @@ static int sky2_resume(struct pci_dev *pdev) if (err) { printk(KERN_ERR PFX "%s: could not up: %d\n", dev->name, err); + rtnl_lock(); dev_close(dev); + rtnl_unlock(); goto out; } } -- cgit v0.10.2 From 709772e6e06564ed94ba740de70185ac3d792773 Mon Sep 17 00:00:00 2001 From: Krzysztof Piotr Oledzki Date: Tue, 10 Jun 2008 15:44:49 -0700 Subject: net: Fix routing tables with id > 255 for legacy software Most legacy software do not like tables > 255 as rtm_table is u8 so tb_id is sent &0xff and it is possible to mismatch for example table 510 with table 254 (main). This patch introduces RT_TABLE_COMPAT=252 so the code uses it if tb_id > 255. It makes such old applications happy, new ones are still able to use RTA_TABLE to get a proper table id. Signed-off-by: Krzysztof Piotr Oledzki Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index a2aec2c..b358c70 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -246,6 +246,7 @@ enum rt_class_t { RT_TABLE_UNSPEC=0, /* User defined values */ + RT_TABLE_COMPAT=252, RT_TABLE_DEFAULT=253, RT_TABLE_MAIN=254, RT_TABLE_LOCAL=255, diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 3b83c34..0d4d728 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -960,7 +960,10 @@ int fib_dump_info(struct sk_buff *skb, u32 pid, u32 seq, int event, rtm->rtm_dst_len = dst_len; rtm->rtm_src_len = 0; rtm->rtm_tos = tos; - rtm->rtm_table = tb_id; + if (tb_id < 256) + rtm->rtm_table = tb_id; + else + rtm->rtm_table = RT_TABLE_COMPAT; NLA_PUT_U32(skb, RTA_TABLE, tb_id); rtm->rtm_type = type; rtm->rtm_flags = fi->fib_flags; -- cgit v0.10.2 From 3294f202dc1acd82223e83ef59f272bd87bb06b2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp ccid-3: Bug-Fix - Zero RTT is possible In commit $(825de27d9e40b3117b29a79d412b7a4b78c5d815) (from 27th May, commit message `dccp ccid-3: Fix "t_ipi explosion" bug'), the CCID-3 window counter computation was fixed to cope with RTTs < 4 microseconds. Such RTTs can be found e.g. when running CCID-3 over loopback. The fix removed a check against RTT < 4, but introduced a divide-by-zero bug. All steady-state RTTs in DCCP are filtered using dccp_sample_rtt(), which ensures non-zero samples. However, a zero RTT is possible on initialisation, when there is no RTT sample from the Request/Response exchange. The fix is to use the fallback-RTT from RFC 4340, 3.4. This is also better than just fixing update_win_count() since it allows other parts of the code to always assume that the RTT is non-zero during the time that the CCID is used. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index f813077..0474f4c 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -329,8 +329,14 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) hctx->ccid3hctx_x = rfc3390_initial_rate(sk); hctx->ccid3hctx_t_ld = now; } else { - /* Sender does not have RTT sample: X_pps = 1 pkt/sec */ - hctx->ccid3hctx_x = hctx->ccid3hctx_s; + /* + * Sender does not have RTT sample: + * - set fallback RTT (RFC 4340, 3.4) since a RTT value + * is needed in several parts (e.g. window counter); + * - set sending rate X_pps = 1pps as per RFC 3448, 4.2. + */ + hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT; + hctx->ccid3hctx_x = hctx->ccid3hctx_s; hctx->ccid3hctx_x <<= 6; } ccid3_update_send_interval(hctx); -- cgit v0.10.2 From 1e2f0e5e8376f2a0ada8760fc9d3104e1a81382b Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp: Fix sparse warnings This patch fixes the following sparse warnings: * nested min(max()) expression: net/dccp/ccids/ccid3.c:91:21: warning: symbol '__x' shadows an earlier one net/dccp/ccids/ccid3.c:91:21: warning: symbol '__y' shadows an earlier one * Declaration of function prototypes in .c instead of .h file, resulting in "should it be static?" warnings. * Declared "struct dccpw" static (local to dccp_probe). * Disabled dccp_delayed_ack() - not fully removed due to RFC 4340, 11.3 ("Receivers SHOULD implement delayed acknowledgement timers ..."). * Used a different local variable name to avoid net/dccp/ackvec.c:293:13: warning: symbol 'state' shadows an earlier one net/dccp/ackvec.c:238:33: originally declared here * Removed unused functions `dccp_ackvector_print' and `dccp_ackvec_print'. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 6de4bd1..1e8be24 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -290,12 +290,12 @@ int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, while (1) { const u8 len = dccp_ackvec_len(av, index); - const u8 state = dccp_ackvec_state(av, index); + const u8 av_state = dccp_ackvec_state(av, index); /* * valid packets not yet in av_buf have a reserved * entry, with a len equal to 0. */ - if (state == DCCP_ACKVEC_STATE_NOT_RECEIVED && + if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED && len == 0 && delta == 0) { /* Found our reserved seat! */ dccp_pr_debug("Found %llu reserved seat!\n", @@ -325,31 +325,6 @@ out_duplicate: return -EILSEQ; } -#ifdef CONFIG_IP_DCCP_DEBUG -void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len) -{ - dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len, - (unsigned long long)ackno); - - while (len--) { - const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6; - const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK; - - dccp_pr_debug_cat("%d,%d|", state, rl); - ++vector; - } - - dccp_pr_debug_cat("\n"); -} - -void dccp_ackvec_print(const struct dccp_ackvec *av) -{ - dccp_ackvector_print(av->av_buf_ackno, - av->av_buf + av->av_buf_head, - av->av_vec_len); -} -#endif - static void dccp_ackvec_throw_record(struct dccp_ackvec *av, struct dccp_ackvec_record *avr) { diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index 0474f4c..a1929f3 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -159,8 +159,8 @@ static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp) } else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld) - (s64)hctx->ccid3hctx_rtt >= 0) { - hctx->ccid3hctx_x = - max(min(2 * hctx->ccid3hctx_x, min_rate), + hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate); + hctx->ccid3hctx_x = max(hctx->ccid3hctx_x, scaled_div(((__u64)hctx->ccid3hctx_s) << 6, hctx->ccid3hctx_rtt)); hctx->ccid3hctx_t_ld = now; diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c index d1dfbb8..97ecec0 100644 --- a/net/dccp/ccids/lib/tfrc.c +++ b/net/dccp/ccids/lib/tfrc.c @@ -14,14 +14,6 @@ module_param(tfrc_debug, bool, 0444); MODULE_PARM_DESC(tfrc_debug, "Enable debug messages"); #endif -extern int tfrc_tx_packet_history_init(void); -extern void tfrc_tx_packet_history_exit(void); -extern int tfrc_rx_packet_history_init(void); -extern void tfrc_rx_packet_history_exit(void); - -extern int tfrc_li_init(void); -extern void tfrc_li_exit(void); - static int __init tfrc_module_init(void) { int rc = tfrc_li_init(); diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index 1fb1187..ddd8107 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -58,7 +58,14 @@ static inline u32 tfrc_ewma(const u32 avg, const u32 newval, const u8 weight) return avg ? (weight * avg + (10 - weight) * newval) / 10 : newval; } -extern u32 tfrc_calc_x(u16 s, u32 R, u32 p); -extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue); +extern u32 tfrc_calc_x(u16 s, u32 R, u32 p); +extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue); +extern int tfrc_tx_packet_history_init(void); +extern void tfrc_tx_packet_history_exit(void); +extern int tfrc_rx_packet_history_init(void); +extern void tfrc_rx_packet_history_exit(void); + +extern int tfrc_li_init(void); +extern void tfrc_li_exit(void); #endif /* _TFRC_H_ */ diff --git a/net/dccp/output.c b/net/dccp/output.c index 1f8a9b6..fe20068 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -508,6 +508,7 @@ void dccp_send_ack(struct sock *sk) EXPORT_SYMBOL_GPL(dccp_send_ack); +#if 0 /* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */ void dccp_send_delayed_ack(struct sock *sk) { @@ -538,6 +539,7 @@ void dccp_send_delayed_ack(struct sock *sk) icsk->icsk_ack.timeout = timeout; sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout); } +#endif void dccp_send_sync(struct sock *sk, const u64 ackno, const enum dccp_pkt_type pkt_type) diff --git a/net/dccp/probe.c b/net/dccp/probe.c index 0bcdc92..81368a7 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -42,7 +42,7 @@ static int bufsize = 64 * 1024; static const char procname[] = "dccpprobe"; -struct { +static struct { struct kfifo *fifo; spinlock_t lock; wait_queue_head_t wait; -- cgit v0.10.2 From 65907a433ac0ca450c4408080f24c6e4743386b2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets This fixes an oversight from an earlier patch, ensuring that Ack Vectors are not processed on request sockets. The issue is that Ack Vectors must not be parsed on request sockets, since the Ack Vector feature depends on the selection of the (TX) CCID. During the initial handshake the CCIDs are undefined, and so RFC 4340, 10.3 applies: "Using CCID-specific options and feature options during a negotiation for the corresponding CCID feature is NOT RECOMMENDED [...]" And it is not even possible: when the server receives the Request from the client, the CCID and Ack vector features are undefined; when the Ack finalising the 3-way hanshake arrives, the request socket has not been cloned yet into a full socket. (This order is necessary, since otherwise the newly created socket would have to be destroyed whenever an option error occurred - a malicious hacker could simply send garbage options and exploit this.) Signed-off-by: Gerrit Renker diff --git a/net/dccp/options.c b/net/dccp/options.c index d2a84a2..43bc24e 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -107,9 +107,11 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, * * CCID-specific options are ignored during connection setup, as * negotiation may still be in progress (see RFC 4340, 10.3). + * The same applies to Ack Vectors, as these depend on the CCID. * */ - if (dreq != NULL && opt >= 128) + if (dreq != NULL && (opt >= 128 || + opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1)) goto ignore_option; switch (opt) { -- cgit v0.10.2 From 1e8a287c79f64226541f5c44aa52d4698bb84cf5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp ccid-3: TFRC reverse-lookup Bug-Fix This fixes a bug in the reverse lookup of p: given a value f(p), instead of p, the function returned the smallest tabulated value f(p). The smallest tabulated value of 10^6 * f(p) = sqrt(2*p/3) + 12 * sqrt(3*p/8) * (32 * p^3 + p) for p=0.0001 is 8172. Since this value is scaled by 10^6, the outcome of this bug is that a loss of 8172/10^6 = 0.8172% was reported whenever the input was below the table resolution of 0.01%. This means that the value was over 80 times too high, resulting in large spikes of the initial loss interval, thus unnecessarily reducing the throughput. Also corrected the printk format (%u for u32). Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c index e4e64b7..2f20a29 100644 --- a/net/dccp/ccids/lib/tfrc_equation.c +++ b/net/dccp/ccids/lib/tfrc_equation.c @@ -661,7 +661,7 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p) EXPORT_SYMBOL_GPL(tfrc_calc_x); -/* +/** * tfrc_calc_x_reverse_lookup - try to find p given f(p) * * @fvalue: function value to match, scaled by 1000000 @@ -676,11 +676,11 @@ u32 tfrc_calc_x_reverse_lookup(u32 fvalue) /* Error cases. */ if (fvalue < tfrc_calc_x_lookup[0][1]) { - DCCP_WARN("fvalue %d smaller than resolution\n", fvalue); - return tfrc_calc_x_lookup[0][1]; + DCCP_WARN("fvalue %u smaller than resolution\n", fvalue); + return TFRC_SMALLEST_P; } if (fvalue > tfrc_calc_x_lookup[TFRC_CALC_X_ARRSIZE - 1][0]) { - DCCP_WARN("fvalue %d exceeds bounds!\n", fvalue); + DCCP_WARN("fvalue %u exceeds bounds!\n", fvalue); return 1000000; } -- cgit v0.10.2 From 7deb0f851003287d7e259bf6b33548b144c0f2d5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp ccid-3: X truncated due to type conversion This fixes a bug in computing the inter-packet-interval t_ipi = s/X: scaled_div32(a, b) uses u32 for b, but in "scaled_div32(s, X)" the type of the sending rate `X' is u64. Since X is scaled by 2^6, this truncates rates greater than 2^26 Bps (~537 Mbps). Using full 64-bit division now. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index ddd8107..ed98575 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -15,7 +15,7 @@ * (at your option) any later version. */ #include -#include +#include #include "../../dccp.h" /* internal includes that this module exports: */ #include "loss_interval.h" @@ -29,21 +29,19 @@ extern int tfrc_debug; #endif /* integer-arithmetic divisions of type (a * 1000000)/b */ -static inline u64 scaled_div(u64 a, u32 b) +static inline u64 scaled_div(u64 a, u64 b) { BUG_ON(b==0); - a *= 1000000; - do_div(a, b); - return a; + return div64_u64(a * 1000000, b); } -static inline u32 scaled_div32(u64 a, u32 b) +static inline u32 scaled_div32(u64 a, u64 b) { u64 result = scaled_div(a, b); if (result > UINT_MAX) { - DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U", - (unsigned long long)a, b); + DCCP_CRIT("Overflow: %llu/%llu > UINT_MAX", + (unsigned long long)a, (unsigned long long)b); return UINT_MAX; } return result; -- cgit v0.10.2 From be4c798a41bf626cdaacf96c382f116ed2f7dbe9 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp: Bug in initial acknowledgment number assignment Step 8.5 in RFC 4340 says for the newly cloned socket Initialize S.GAR := S.ISS, but what in fact the code (minisocks.c) does is Initialize S.GAR := S.ISR, which is wrong (typo?) -- fixed by the patch. Signed-off-by: Gerrit Renker diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 33ad483..66dca5b 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -165,12 +165,12 @@ out_free: /* See dccp_v4_conn_request */ newdmsk->dccpms_sequence_window = req->rcv_wnd; - newdp->dccps_gar = newdp->dccps_isr = dreq->dreq_isr; - dccp_update_gsr(newsk, dreq->dreq_isr); - - newdp->dccps_iss = dreq->dreq_iss; + newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss; dccp_update_gss(newsk, dreq->dreq_iss); + newdp->dccps_isr = dreq->dreq_isr; + dccp_update_gsr(newsk, dreq->dreq_isr); + /* * SWL and AWL are initially adjusted so that they are not less than * the initial Sequence Numbers received and sent, respectively: -- cgit v0.10.2 From 7427d8b815c7fc0b005a17cf3952b7ebef0481d2 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 11 Jun 2008 12:08:39 +0800 Subject: smc91x: fix build error from the SMC_GET_MAC_ADDR API change Cc: Jeff Garzik Cc: Andrew Morton Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 69e97a1..86068186 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -93,14 +93,14 @@ #define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l) # endif /* check if the mac in reg is valid */ -#define SMC_GET_MAC_ADDR(addr) \ +#define SMC_GET_MAC_ADDR(lp, addr) \ do { \ unsigned int __v; \ - __v = SMC_inw(ioaddr, ADDR0_REG); \ + __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \ addr[0] = __v; addr[1] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR1_REG); \ + __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ addr[2] = __v; addr[3] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR2_REG); \ + __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ addr[4] = __v; addr[5] = __v >> 8; \ if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \ random_ether_addr(addr); \ -- cgit v0.10.2 From a4aff2233786640c10b178ad78d4dd7e375f1955 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Jun 2008 10:43:14 +0100 Subject: [ARM] 5077/1: spi: fix list scan success verification in PXA ssp driver The list search success check in arch/arm/mach-pxa/ssp.c is wrong: for example, it didn't recognise failure for me when I requested port 0. Signed-off-by: Guennadi Liakhovetski Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 00af7f2..0bb3198 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label) mutex_unlock(&ssp_lock); - if (ssp->port_id != port) + if (&ssp->node == &ssp_list) return NULL; return ssp; -- cgit v0.10.2 From 62cfcf4f467733a8dc218691c791804a148da887 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=BCrgen=20Schindele?= Date: Wed, 11 Jun 2008 19:56:06 +0100 Subject: [ARM] 5090/1: Correct pxafb palette typo error This patch correct a typo error in pxafb vhich is relevant for 8-bit palette framebuffer configuration. Signed-off-by: Jrgen Schindele Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 274bc93..7dcda18 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -573,8 +573,8 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; } else { - pal_desc = &fbi->dma_buff->pal_desc[dma]; - pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]); + pal_desc = &fbi->dma_buff->pal_desc[pal]; + pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]); pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE; pal_desc->fidr = 0; @@ -1276,6 +1276,8 @@ static int __init pxafb_map_video_memory(struct pxafb_info *fbi) fbi->dma_buff_phys = fbi->map_dma; fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16)); + #ifdef CONFIG_FB_PXA_SMARTPANEL fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; fbi->n_smart_cmds = 0; -- cgit v0.10.2 From e1094bfa26e5e94af2fea79e004614dbce42b008 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 May 2008 11:32:59 +0800 Subject: ACPI: Disable Fixed_RTC event when installing RTC handler The Fixed_RTC event should be disabled when installing RTC handler. Only when RTC alarm is set will it be enabled again. If it is not disabled, maybe some machines will be powered on automatically after the system is shutdown even when the RTC alarm is not set. http://bugzilla.kernel.org/show_bug.cgi?id=10010 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 06f8634..2808dc6 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -272,6 +272,12 @@ static u32 rtc_handler(void *context) static inline void rtc_wake_setup(void) { acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * After the RTC handler is installed, the Fixed_RTC event should + * be disabled. Only when the RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); } static void rtc_wake_on(struct device *dev) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 8a5fe87..224c57c 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -495,6 +495,12 @@ static int __init acpi_sleep_proc_init(void) acpi_root_dir, &acpi_system_alarm_fops); acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * Disable the RTC event after installing RTC handler. + * Only when RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); #endif /* HAVE_ACPI_LEGACY_ALARM */ /* 'wakeup device' [R/W] */ -- cgit v0.10.2 From dcb84f335bee9c9a7781cfc5d74492dccaf066d2 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 19 May 2008 19:09:27 -0400 Subject: cpuidle acpi driver: fix oops on AC<->DC cpuidle and acpi driver interaction bug with the way cpuidle_register_driver() is called. Due to this bug, there will be oops on AC<->DC on some systems, where they support C-states in one DC and not in AC. The current code does ON BOOT: Look at CST and other C-state info to see whether more than C1 is supported. If it is, then acpi processor_idle does a cpuidle_register_driver() call, which internally enables the device. ON CST change notification (AC<->DC) and on suspend-resume: acpi driver temporarily disables device, updates the device with any new C-states, and reenables the device. The problem is is on boot, there are no C2, C3 states supported and we skip the register. Later on AC<->DC, we may get a CST notification and we try to reevaluate CST and enabled the device, without actually registering it. This causes breakage as we try to create /sys fs sub directory, without the parent directory which is created at register time. Thanks to Sanjeev for reporting the problem here. http://bugzilla.kernel.org/show_bug.cgi?id=10394 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2dd2c1f..556ee15 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1669,6 +1669,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) return -EINVAL; } + dev->cpu = pr->id; for (i = 0; i < CPUIDLE_STATE_MAX; i++) { dev->states[i].name[0] = '\0'; dev->states[i].desc[0] = '\0'; @@ -1738,7 +1739,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) int acpi_processor_cst_has_changed(struct acpi_processor *pr) { - int ret; + int ret = 0; if (boot_option_idle_override) return 0; @@ -1756,8 +1757,10 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) cpuidle_pause_and_lock(); cpuidle_disable_device(&pr->power.dev); acpi_processor_get_power_info(pr); - acpi_processor_setup_cpuidle(pr); - ret = cpuidle_enable_device(&pr->power.dev); + if (pr->flags.power) { + acpi_processor_setup_cpuidle(pr); + ret = cpuidle_enable_device(&pr->power.dev); + } cpuidle_resume_and_unlock(); return ret; @@ -1813,7 +1816,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, if (pr->flags.power) { #ifdef CONFIG_CPU_IDLE acpi_processor_setup_cpuidle(pr); - pr->power.dev.cpu = pr->id; if (cpuidle_register_device(&pr->power.dev)) return -EIO; #endif @@ -1850,8 +1852,7 @@ int acpi_processor_power_exit(struct acpi_processor *pr, return 0; #ifdef CONFIG_CPU_IDLE - if (pr->flags.power) - cpuidle_unregister_device(&pr->power.dev); + cpuidle_unregister_device(&pr->power.dev); #endif pr->flags.power_setup_done = 0; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index fc555a9..23554b6 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -38,6 +38,8 @@ static void cpuidle_kick_cpus(void) static void cpuidle_kick_cpus(void) {} #endif +static int __cpuidle_register_device(struct cpuidle_device *dev); + /** * cpuidle_idle_call - the main idle loop * @@ -138,6 +140,12 @@ int cpuidle_enable_device(struct cpuidle_device *dev) if (!dev->state_count) return -EINVAL; + if (dev->registered == 0) { + ret = __cpuidle_register_device(dev); + if (ret) + return ret; + } + if ((ret = cpuidle_add_state_sysfs(dev))) return ret; @@ -232,10 +240,13 @@ static void poll_idle_init(struct cpuidle_device *dev) {} #endif /* CONFIG_ARCH_HAS_CPU_RELAX */ /** - * cpuidle_register_device - registers a CPU's idle PM feature + * __cpuidle_register_device - internal register function called before register + * and enable routines * @dev: the cpu + * + * cpuidle_lock mutex must be held before this is called */ -int cpuidle_register_device(struct cpuidle_device *dev) +static int __cpuidle_register_device(struct cpuidle_device *dev) { int ret; struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); @@ -247,18 +258,34 @@ int cpuidle_register_device(struct cpuidle_device *dev) init_completion(&dev->kobj_unregister); - mutex_lock(&cpuidle_lock); - poll_idle_init(dev); per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { - mutex_unlock(&cpuidle_lock); module_put(cpuidle_curr_driver->owner); return ret; } + dev->registered = 1; + return 0; +} + +/** + * cpuidle_register_device - registers a CPU's idle PM feature + * @dev: the cpu + */ +int cpuidle_register_device(struct cpuidle_device *dev) +{ + int ret; + + mutex_lock(&cpuidle_lock); + + if ((ret = __cpuidle_register_device(dev))) { + mutex_unlock(&cpuidle_lock); + return ret; + } + cpuidle_enable_device(dev); cpuidle_install_idle_handler(); @@ -278,6 +305,9 @@ void cpuidle_unregister_device(struct cpuidle_device *dev) { struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); + if (dev->registered == 0) + return; + cpuidle_pause_and_lock(); cpuidle_disable_device(dev); diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 51e6b1e..dcf77fa 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -82,6 +82,7 @@ struct cpuidle_state_kobj { }; struct cpuidle_device { + unsigned int registered:1; unsigned int enabled:1; unsigned int cpu; -- cgit v0.10.2 From 197a2cd907e3a5278a1cfd48c86402133f38a9ba Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:09 -0300 Subject: thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL rename Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad0133907790c50283bf03271d920d6897043 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 01c6c3d..64b3f14 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -503,7 +503,7 @@ generate input device EV_KEY events. In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW events for switches: -SW_RADIO T60 and later hardare rfkill rocker switch +SW_RFKILL_ALL T60 and later hardare rfkill rocker switch SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A Non hot-key ACPI HKEY event map: diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index a0ce0b2..f81e048 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1293,7 +1293,7 @@ static void tpacpi_input_send_radiosw(void) mutex_lock(&tpacpi_inputdev_send_mutex); input_report_switch(tpacpi_inputdev, - SW_RADIO, !!wlsw); + SW_RFKILL_ALL, !!wlsw); input_sync(tpacpi_inputdev); mutex_unlock(&tpacpi_inputdev_send_mutex); @@ -2199,7 +2199,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (tp_features.hotkey_wlsw) { set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RADIO, tpacpi_inputdev->swbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); } if (tp_features.hotkey_tablet) { set_bit(EV_SW, tpacpi_inputdev->evbit); -- cgit v0.10.2 From 9c0a76e16ee6648f4bd19563e9fe12a4f4fabba1 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:10 -0300 Subject: thinkpad-acpi: fix initialization error paths Rework some subdriver init and exit handlers, in order to fix some initialization error paths that were missing, or broken. Hitting those bugs should be extremely rare in the real world, but should that happen, thinkpad-acpi would fail to dealocate some resources and a reboot might well be needed to be able to load the driver again. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index f81e048..58973da 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1921,6 +1921,29 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_wakeup_hotunplug_complete.attr, }; +static void hotkey_exit(void) +{ +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_stop_sync(); +#endif + + if (hotkey_dev_attributes) + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + + kfree(hotkey_keycode_map); + + if (tp_features.hotkey) { + dbg_printk(TPACPI_DBG_EXIT, + "restoring original hot key mask\n"); + /* no short-circuit boolean operator below! */ + if ((hotkey_mask_set(hotkey_orig_mask) | + hotkey_status_set(hotkey_orig_status)) != 0) + printk(TPACPI_ERR + "failed to restore hot key mask " + "to BIOS defaults\n"); + } +} + static int __init hotkey_init(struct ibm_init_struct *iibm) { /* Requirements for changing the default keymaps: @@ -2060,226 +2083,220 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n", str_supported(tp_features.hotkey)); - if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(13, NULL); - if (!hotkey_dev_attributes) - return -ENOMEM; - res = add_many_to_attr_set(hotkey_dev_attributes, - hotkey_attributes, - ARRAY_SIZE(hotkey_attributes)); - if (res) - return res; + if (!tp_features.hotkey) + return 1; - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking - for HKEY interface version 0x100 */ - if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { - if ((hkeyv >> 8) != 1) { - printk(TPACPI_ERR "unknown version of the " - "HKEY interface: 0x%x\n", hkeyv); - printk(TPACPI_ERR "please report this to %s\n", - TPACPI_MAIL); - } else { - /* - * MHKV 0x100 in A31, R40, R40e, - * T4x, X31, and later - */ - tp_features.hotkey_mask = 1; - } + hotkey_dev_attributes = create_attr_set(13, NULL); + if (!hotkey_dev_attributes) + return -ENOMEM; + res = add_many_to_attr_set(hotkey_dev_attributes, + hotkey_attributes, + ARRAY_SIZE(hotkey_attributes)); + if (res) + goto err_exit; + + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking + for HKEY interface version 0x100 */ + if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { + if ((hkeyv >> 8) != 1) { + printk(TPACPI_ERR "unknown version of the " + "HKEY interface: 0x%x\n", hkeyv); + printk(TPACPI_ERR "please report this to %s\n", + TPACPI_MAIL); + } else { + /* + * MHKV 0x100 in A31, R40, R40e, + * T4x, X31, and later + */ + tp_features.hotkey_mask = 1; } + } - vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", - str_supported(tp_features.hotkey_mask)); + vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", + str_supported(tp_features.hotkey_mask)); - if (tp_features.hotkey_mask) { - if (!acpi_evalf(hkey_handle, &hotkey_all_mask, - "MHKA", "qd")) { - printk(TPACPI_ERR - "missing MHKA handler, " - "please report this to %s\n", - TPACPI_MAIL); - /* FN+F12, FN+F4, FN+F3 */ - hotkey_all_mask = 0x080cU; - } + if (tp_features.hotkey_mask) { + if (!acpi_evalf(hkey_handle, &hotkey_all_mask, + "MHKA", "qd")) { + printk(TPACPI_ERR + "missing MHKA handler, " + "please report this to %s\n", + TPACPI_MAIL); + /* FN+F12, FN+F4, FN+F3 */ + hotkey_all_mask = 0x080cU; } + } - /* hotkey_source_mask *must* be zero for - * the first hotkey_mask_get */ - res = hotkey_status_get(&hotkey_orig_status); - if (!res && tp_features.hotkey_mask) { - res = hotkey_mask_get(); - hotkey_orig_mask = hotkey_mask; - if (!res) { - res = add_many_to_attr_set( - hotkey_dev_attributes, - hotkey_mask_attributes, - ARRAY_SIZE(hotkey_mask_attributes)); - } - } + /* hotkey_source_mask *must* be zero for + * the first hotkey_mask_get */ + res = hotkey_status_get(&hotkey_orig_status); + if (res) + goto err_exit; + + if (tp_features.hotkey_mask) { + res = hotkey_mask_get(); + if (res) + goto err_exit; + + hotkey_orig_mask = hotkey_mask; + res = add_many_to_attr_set( + hotkey_dev_attributes, + hotkey_mask_attributes, + ARRAY_SIZE(hotkey_mask_attributes)); + if (res) + goto err_exit; + } #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - if (tp_features.hotkey_mask) { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK - & ~hotkey_all_mask; - } else { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; - } + if (tp_features.hotkey_mask) { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK + & ~hotkey_all_mask; + } else { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; + } - vdbg_printk(TPACPI_DBG_INIT, - "hotkey source mask 0x%08x, polling freq %d\n", - hotkey_source_mask, hotkey_poll_freq); + vdbg_printk(TPACPI_DBG_INIT, + "hotkey source mask 0x%08x, polling freq %d\n", + hotkey_source_mask, hotkey_poll_freq); #endif - /* Not all thinkpads have a hardware radio switch */ - if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { - tp_features.hotkey_wlsw = 1; - printk(TPACPI_INFO - "radio switch found; radios are %s\n", - enabled(status, 0)); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_radio_sw.attr); - } + /* Not all thinkpads have a hardware radio switch */ + if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { + tp_features.hotkey_wlsw = 1; + printk(TPACPI_INFO + "radio switch found; radios are %s\n", + enabled(status, 0)); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_radio_sw.attr); + } - /* For X41t, X60t, X61t Tablets... */ - if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { - tp_features.hotkey_tablet = 1; - printk(TPACPI_INFO - "possible tablet mode switch found; " - "ThinkPad in %s mode\n", - (status & TP_HOTKEY_TABLET_MASK)? - "tablet" : "laptop"); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_tablet_mode.attr); - } + /* For X41t, X60t, X61t Tablets... */ + if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { + tp_features.hotkey_tablet = 1; + printk(TPACPI_INFO + "possible tablet mode switch found; " + "ThinkPad in %s mode\n", + (status & TP_HOTKEY_TABLET_MASK)? + "tablet" : "laptop"); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_tablet_mode.attr); + } - if (!res) - res = register_attr_set_with_sysfs( - hotkey_dev_attributes, - &tpacpi_pdev->dev.kobj); - if (res) - return res; + if (!res) + res = register_attr_set_with_sysfs( + hotkey_dev_attributes, + &tpacpi_pdev->dev.kobj); + if (res) + goto err_exit; - /* Set up key map */ + /* Set up key map */ - hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, - GFP_KERNEL); - if (!hotkey_keycode_map) { - printk(TPACPI_ERR - "failed to allocate memory for key map\n"); - return -ENOMEM; - } + hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, + GFP_KERNEL); + if (!hotkey_keycode_map) { + printk(TPACPI_ERR + "failed to allocate memory for key map\n"); + res = -ENOMEM; + goto err_exit; + } - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - dbg_printk(TPACPI_DBG_INIT, - "using Lenovo default hot key map\n"); - memcpy(hotkey_keycode_map, &lenovo_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + dbg_printk(TPACPI_DBG_INIT, + "using Lenovo default hot key map\n"); + memcpy(hotkey_keycode_map, &lenovo_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } else { + dbg_printk(TPACPI_DBG_INIT, + "using IBM default hot key map\n"); + memcpy(hotkey_keycode_map, &ibm_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } + + set_bit(EV_KEY, tpacpi_inputdev->evbit); + set_bit(EV_MSC, tpacpi_inputdev->evbit); + set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); + tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; + tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; + tpacpi_inputdev->keycode = hotkey_keycode_map; + for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { + if (hotkey_keycode_map[i] != KEY_RESERVED) { + set_bit(hotkey_keycode_map[i], + tpacpi_inputdev->keybit); } else { - dbg_printk(TPACPI_DBG_INIT, - "using IBM default hot key map\n"); - memcpy(hotkey_keycode_map, &ibm_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); - } - - set_bit(EV_KEY, tpacpi_inputdev->evbit); - set_bit(EV_MSC, tpacpi_inputdev->evbit); - set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); - tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; - tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; - tpacpi_inputdev->keycode = hotkey_keycode_map; - for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { - if (hotkey_keycode_map[i] != KEY_RESERVED) { - set_bit(hotkey_keycode_map[i], - tpacpi_inputdev->keybit); - } else { - if (i < sizeof(hotkey_reserved_mask)*8) - hotkey_reserved_mask |= 1 << i; - } - } - - if (tp_features.hotkey_wlsw) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); - } - if (tp_features.hotkey_tablet) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + if (i < sizeof(hotkey_reserved_mask)*8) + hotkey_reserved_mask |= 1 << i; } + } - /* Do not issue duplicate brightness change events to - * userspace */ - if (!tp_features.bright_acpimode) - /* update bright_acpimode... */ - tpacpi_check_std_acpi_brightness_support(); - - if (tp_features.bright_acpimode) { - printk(TPACPI_INFO - "This ThinkPad has standard ACPI backlight " - "brightness control, supported by the ACPI " - "video driver\n"); - printk(TPACPI_NOTICE - "Disabling thinkpad-acpi brightness events " - "by default...\n"); - - /* The hotkey_reserved_mask change below is not - * necessary while the keys are at KEY_RESERVED in the - * default map, but better safe than sorry, leave it - * here as a marker of what we have to do, especially - * when we finally become able to set this at runtime - * on response to X.org requests */ - hotkey_reserved_mask |= - (1 << TP_ACPI_HOTKEYSCAN_FNHOME) - | (1 << TP_ACPI_HOTKEYSCAN_FNEND); - } + if (tp_features.hotkey_wlsw) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); + } + if (tp_features.hotkey_tablet) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + } - dbg_printk(TPACPI_DBG_INIT, - "enabling hot key handling\n"); - res = hotkey_status_set(1); - if (res) - return res; - res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) - & ~hotkey_reserved_mask) - | hotkey_orig_mask); - if (res < 0 && res != -ENXIO) - return res; + /* Do not issue duplicate brightness change events to + * userspace */ + if (!tp_features.bright_acpimode) + /* update bright_acpimode... */ + tpacpi_check_std_acpi_brightness_support(); - dbg_printk(TPACPI_DBG_INIT, - "legacy hot key reporting over procfs %s\n", - (hotkey_report_mode < 2) ? - "enabled" : "disabled"); + if (tp_features.bright_acpimode) { + printk(TPACPI_INFO + "This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + printk(TPACPI_NOTICE + "Disabling thinkpad-acpi brightness events " + "by default...\n"); + + /* The hotkey_reserved_mask change below is not + * necessary while the keys are at KEY_RESERVED in the + * default map, but better safe than sorry, leave it + * here as a marker of what we have to do, especially + * when we finally become able to set this at runtime + * on response to X.org requests */ + hotkey_reserved_mask |= + (1 << TP_ACPI_HOTKEYSCAN_FNHOME) + | (1 << TP_ACPI_HOTKEYSCAN_FNEND); + } + + dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); + res = hotkey_status_set(1); + if (res) { + hotkey_exit(); + return res; + } + res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask) + | hotkey_orig_mask); + if (res < 0 && res != -ENXIO) { + hotkey_exit(); + return res; + } - tpacpi_inputdev->open = &hotkey_inputdev_open; - tpacpi_inputdev->close = &hotkey_inputdev_close; + dbg_printk(TPACPI_DBG_INIT, + "legacy hot key reporting over procfs %s\n", + (hotkey_report_mode < 2) ? + "enabled" : "disabled"); - hotkey_poll_setup_safe(1); - tpacpi_input_send_radiosw(); - tpacpi_input_send_tabletsw(); - } + tpacpi_inputdev->open = &hotkey_inputdev_open; + tpacpi_inputdev->close = &hotkey_inputdev_close; - return (tp_features.hotkey)? 0 : 1; -} + hotkey_poll_setup_safe(1); + tpacpi_input_send_radiosw(); + tpacpi_input_send_tabletsw(); -static void hotkey_exit(void) -{ -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - hotkey_poll_stop_sync(); -#endif + return 0; - if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, - "restoring original hot key mask\n"); - /* no short-circuit boolean operator below! */ - if ((hotkey_mask_set(hotkey_orig_mask) | - hotkey_status_set(hotkey_orig_status)) != 0) - printk(TPACPI_ERR - "failed to restore hot key mask " - "to BIOS defaults\n"); - } +err_exit: + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + hotkey_dev_attributes = NULL; - if (hotkey_dev_attributes) { - delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); - hotkey_dev_attributes = NULL; - } + return (res < 0)? res : 1; } static void hotkey_notify(struct ibm_struct *ibm, u32 event) @@ -3319,7 +3336,7 @@ static struct tpacpi_led_classdev tpacpi_led_thinklight = { static int __init light_init(struct ibm_init_struct *iibm) { - int rc = 0; + int rc; vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n"); @@ -3337,20 +3354,23 @@ static int __init light_init(struct ibm_init_struct *iibm) tp_features.light_status = acpi_evalf(ec_handle, NULL, "KBLT", "qv"); - vdbg_printk(TPACPI_DBG_INIT, "light is %s\n", - str_supported(tp_features.light)); + vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n", + str_supported(tp_features.light), + str_supported(tp_features.light_status)); - if (tp_features.light) { - rc = led_classdev_register(&tpacpi_pdev->dev, - &tpacpi_led_thinklight.led_classdev); - } + if (!tp_features.light) + return 1; + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_led_thinklight.led_classdev); if (rc < 0) { tp_features.light = 0; tp_features.light_status = 0; - } else { - rc = (tp_features.light)? 0 : 1; + } else { + rc = 0; } + return rc; } @@ -3978,7 +3998,6 @@ static void led_exit(void) } kfree(tpacpi_leds); - tpacpi_leds = NULL; } static int __init led_init(struct ibm_init_struct *iibm) @@ -4802,7 +4821,6 @@ static void brightness_exit(void) vdbg_printk(TPACPI_DBG_EXIT, "calling backlight_device_unregister()\n"); backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; } } @@ -5764,11 +5782,16 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_control_access_mode != TPACPI_FAN_WR_NONE) { rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); - if (!(rc < 0)) - rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, - &driver_attr_fan_watchdog); if (rc < 0) return rc; + + rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, + &driver_attr_fan_watchdog); + if (rc < 0) { + sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, + &fan_attr_group); + return rc; + } return 0; } else return 1; -- cgit v0.10.2 From 24e45bbe695719dca8c20e03d386eb6ea86526b5 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:11 -0300 Subject: thinkpad-acpi: fix LED handling on older ThinkPads The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write data to kernel memory it had no business touching, for leds number 3 and above. If one is lucky, that illegal write would cause an OOPS, but chances are it would silently corrupt a byte. The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)". Fix the bug by refactoring the entire code to be far more obvious on what it wants to do. Also do some defensive "constification". Issue reported by Karol Lewandowski (he's an lucky guy and got an OOPS instead of silent corruption :-) ). Root cause of the OOPS identified by Adrian Bunk . Thanks, Adrian! Signed-off-by: Henrique de Moraes Holschuh Tested-by: Karol Lewandowski Signed-off-by: Len Brown diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 58973da..b596929 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3853,7 +3853,7 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { "tpacpi::standby", }; -static int led_get_status(unsigned int led) +static int led_get_status(const unsigned int led) { int status; enum led_status_t led_s; @@ -3877,41 +3877,42 @@ static int led_get_status(unsigned int led) /* not reached */ } -static int led_set_status(unsigned int led, enum led_status_t ledstatus) +static int led_set_status(const unsigned int led, + const enum led_status_t ledstatus) { /* off, on, blink. Index is led_status_t */ - static const int led_sled_arg1[] = { 0, 1, 3 }; - static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ - static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ - static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; + static const unsigned int led_sled_arg1[] = { 0, 1, 3 }; + static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 }; int rc = 0; switch (led_supported) { case TPACPI_LED_570: - /* 570 */ - led = 1 << led; - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_sled_arg1[ledstatus])) - rc = -EIO; - break; + /* 570 */ + if (led > 7) + return -EINVAL; + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + (1 << led), led_sled_arg1[ledstatus])) + rc = -EIO; + break; case TPACPI_LED_OLD: - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - led = 1 << led; - rc = ec_write(TPACPI_LED_EC_HLMS, led); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLBL, - led * led_exp_hlbl[ledstatus]); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLCL, - led * led_exp_hlcl[ledstatus]); - break; + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ + if (led > 7) + return -EINVAL; + rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led)); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLBL, + (ledstatus == TPACPI_LED_BLINK) << led); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLCL, + (ledstatus != TPACPI_LED_OFF) << led); + break; case TPACPI_LED_NEW: - /* all others */ - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_led_arg1[ledstatus])) - rc = -EIO; - break; + /* all others */ + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_led_arg1[ledstatus])) + rc = -EIO; + break; default: rc = -ENXIO; } -- cgit v0.10.2 From 1b7fc5aae8867046f8d3d45808309d5b7f2e036a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 6 Jun 2008 11:49:33 -0400 Subject: ACPI: EC: Use msleep instead of udelay while waiting for event. http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 0924992..5622aee 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -194,7 +194,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) return 0; - udelay(ACPI_EC_UDELAY); + msleep(1); } } pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n", -- cgit v0.10.2 From c21d1e7f53ffd9c0f162c42e7fde07d1c45fa127 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Mon, 12 May 2008 19:13:09 +0100 Subject: ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message As of recently (probably 2.6.26-rc1) I've been getting the following mangling in the kernel log: [4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d This is due to a missing newline character in the first message. The following patch against 2.6.26-rc2 fixes it. Please apply. Signed-off-by: Alistair John Strachan Signed-off-by: Len Brown diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c index fb57b93..0e31960 100644 --- a/drivers/acpi/tables/tbxface.c +++ b/drivers/acpi/tables/tbxface.c @@ -540,7 +540,7 @@ static acpi_status acpi_tb_load_namespace(void) acpi_tb_print_table_header(0, table); if (no_auto_ssdt == 0) { - printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\""); + printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n"); } } -- cgit v0.10.2 From 0638bc8dc037d844efe1d4abf44488c037705905 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:08:23 +0300 Subject: MAINTAINERS: update ACPI homepage This patch updates the location of the ACPI homepage in MAINTAINERS. Signed-off-by: Adrian Bunk Signed-off-by: Len Brown diff --git a/MAINTAINERS b/MAINTAINERS index e3560df..9d43042 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -228,21 +228,21 @@ ACPI BATTERY DRIVERS P: Alexey Starikovskiy M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI EC DRIVER P: Alexey Starikovskiy M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI FAN DRIVER P: Len Brown M: len.brown@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI PCI HOTPLUG DRIVER @@ -255,14 +255,14 @@ ACPI THERMAL DRIVER P: Len Brown M: len.brown@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI VIDEO DRIVER P: Rui Zhang M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI WMI DRIVER -- cgit v0.10.2 From e9fe9e188118a0a34c6200d9b10ea6247f53592d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:04 -0700 Subject: pnpacpi: fix IRQ flag decoding When decoding IRQ trigger mode and polarity, it is not enough to mask by IORESOURCE_BITS because there are now additional bits defined. For example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering and *polarity at all. I can't point to a failure that this patch fixes, but bugs in this area have caused problems when resuming after suspend, for example: http://bugzilla.kernel.org/show_bug.cgi?id=6316 http://bugzilla.kernel.org/show_bug.cgi?id=9487 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187 This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 [rene.herman@keyaccess.nl: fix comment] Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 0201c8a..ab09fe6 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -56,9 +56,11 @@ static int irq_flags(int triggering, int polarity, int shareable) return flags; } -static void decode_irq_flags(int flag, int *triggering, int *polarity) +static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, + int *polarity) { - switch (flag) { + switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { case IORESOURCE_IRQ_LOWLEVEL: *triggering = ACPI_LEVEL_SENSITIVE; *polarity = ACPI_ACTIVE_LOW; @@ -75,6 +77,12 @@ static void decode_irq_flags(int flag, int *triggering, int *polarity) *triggering = ACPI_EDGE_SENSITIVE; *polarity = ACPI_ACTIVE_HIGH; break; + default: + dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n", + flags); + *triggering = ACPI_EDGE_SENSITIVE; + *polarity = ACPI_ACTIVE_HIGH; + break; } } @@ -790,7 +798,7 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct acpi_resource_irq *irq = &resource->data.irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); irq->triggering = triggering; irq->polarity = polarity; if (triggering == ACPI_EDGE_SENSITIVE) @@ -813,7 +821,7 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index d5d40a9..c6801bf 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -53,14 +53,14 @@ struct resource_list { #define IORESOURCE_AUTO 0x40000000 #define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */ -/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */ +/* PnP IRQ specific bits (IORESOURCE_BITS) */ #define IORESOURCE_IRQ_HIGHEDGE (1<<0) #define IORESOURCE_IRQ_LOWEDGE (1<<1) #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) #define IORESOURCE_IRQ_LOWLEVEL (1<<3) #define IORESOURCE_IRQ_SHAREABLE (1<<4) -/* ISA PnP DMA specific bits (IORESOURCE_BITS) */ +/* PnP DMA specific bits (IORESOURCE_BITS) */ #define IORESOURCE_DMA_TYPE_MASK (3<<0) #define IORESOURCE_DMA_8BIT (0<<0) #define IORESOURCE_DMA_8AND16BIT (1<<0) @@ -76,7 +76,7 @@ struct resource_list { #define IORESOURCE_DMA_TYPEB (2<<6) #define IORESOURCE_DMA_TYPEF (3<<6) -/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */ +/* PnP memory I/O specific bits (IORESOURCE_BITS) */ #define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */ #define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */ #define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */ -- cgit v0.10.2 From a993273beae8022390e48fe9205480565ad470ab Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:05 -0700 Subject: pnpacpi: fix shareable IRQ encode/decode When we encode IRQ resources, we should use the "shareable" flag we got from _PRS rather than guessing based on the IRQ trigger mode. This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index ab09fe6..8681ff6 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -50,14 +50,14 @@ static int irq_flags(int triggering, int polarity, int shareable) flags = IORESOURCE_IRQ_HIGHEDGE; } - if (shareable) + if (shareable == ACPI_SHARED) flags |= IORESOURCE_IRQ_SHAREABLE; return flags; } static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, - int *polarity) + int *polarity, int *shareable) { switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { @@ -84,6 +84,11 @@ static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, *polarity = ACPI_ACTIVE_HIGH; break; } + + if (flags & IORESOURCE_IRQ_SHAREABLE) + *shareable = ACPI_SHARED; + else + *shareable = ACPI_EXCLUSIVE; } static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev, @@ -796,15 +801,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_irq *irq = &resource->data.irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); irq->triggering = triggering; irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - irq->sharable = ACPI_EXCLUSIVE; - else - irq->sharable = ACPI_SHARED; + irq->sharable = shareable; irq->interrupt_count = 1; irq->interrupts[0] = p->start; @@ -819,16 +821,13 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - extended_irq->sharable = ACPI_EXCLUSIVE; - else - extended_irq->sharable = ACPI_SHARED; + extended_irq->sharable = shareable; extended_irq->interrupt_count = 1; extended_irq->interrupts[0] = p->start; -- cgit v0.10.2 From 36d872a370d3d10e5a7faa9dcacce744260fb13b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:06 -0700 Subject: PNPACPI: use _CRS IRQ descriptor length for _SRS When configuring the resources of an ACPI device, we first evaluate _CRS to get a template of resource descriptors, then fill in the specific resource values we want, and finally evaluate _SRS to actually configure the device. Some resources have optional fields, so the size of encoded descriptors varies depending on the specific values. For example, IRQ descriptors can be either two or three bytes long. The third byte contains triggering information and can be omitted if the IRQ is edge-triggered and active high. The BIOS often assumes that IRQ descriptors in the _SRS buffer use the same format as those in the _CRS buffer, so this patch enforces that constraint. The "Start Dependent Function" descriptor also has an optional byte, but we don't currently encode those descriptors, so I didn't do anything for those. I have tested this patch on a Toshiba Portege 4000. Without the patch, parport_pc claims the parallel port only if I use "pnpacpi=off". This patch makes it work with PNPACPI. This is an extension of a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42 References: http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 8681ff6..46c791a 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -755,6 +755,9 @@ static acpi_status pnpacpi_type_resources(struct acpi_resource *res, void *data) if (pnpacpi_supported_resource(res)) { (*resource)->type = res->type; (*resource)->length = sizeof(struct acpi_resource); + if (res->type == ACPI_RESOURCE_TYPE_IRQ) + (*resource)->data.irq.descriptor_length = + res->data.irq.descriptor_length; (*resource)++; } @@ -810,10 +813,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, irq->interrupt_count = 1; irq->interrupts[0] = p->start; - dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start, + dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n", + (int) p->start, triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge", polarity == ACPI_ACTIVE_LOW ? "low" : "high", - irq->sharable == ACPI_SHARED ? "shared" : "exclusive"); + irq->sharable == ACPI_SHARED ? "shared" : "exclusive", + irq->descriptor_length); } static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, -- cgit v0.10.2 From 39b8931b5cad9a7cbcd2394a40a088311e783a82 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 9 Jun 2008 16:48:18 -0700 Subject: ACPI: handle invalid ACPI SLIT table This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 853d1f1..43687cc 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -465,7 +465,6 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); - memset(numa_slit, 10, sizeof(numa_slit)); return; } slit_table = slit; @@ -574,8 +573,14 @@ void __init acpi_numa_arch_fixup(void) printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); - if (!slit_table) + if (!slit_table) { + for (i = 0; i < MAX_NUMNODES; i++) + for (j = 0; j < MAX_NUMNODES; j++) + node_distance(i, j) = i == j ? LOCAL_DISTANCE : + REMOTE_DISTANCE; return; + } + memset(numa_slit, -1, sizeof(numa_slit)); for (i = 0; i < slit_table->locality_count; i++) { if (!pxm_bit_test(i)) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 3890234..99649dc 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -97,36 +97,9 @@ static __init inline int srat_disabled(void) return numa_off || acpi_numa < 0; } -/* - * A lot of BIOS fill in 10 (= no distance) everywhere. This messes - * up the NUMA heuristics which wants the local node to have a smaller - * distance than the others. - * Do some quick checks here and only use the SLIT if it passes. - */ -static __init int slit_valid(struct acpi_table_slit *slit) -{ - int i, j; - int d = slit->locality_count; - for (i = 0; i < d; i++) { - for (j = 0; j < d; j++) { - u8 val = slit->entry[d*i + j]; - if (i == j) { - if (val != LOCAL_DISTANCE) - return 0; - } else if (val <= LOCAL_DISTANCE) - return 0; - } - } - return 1; -} - /* Callback for SLIT parsing */ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { - if (!slit_valid(slit)) { - printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); - return; - } acpi_slit = slit; } diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 5d59cb3..658e5f3 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -140,19 +140,42 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) } } +/* + * A lot of BIOS fill in 10 (= no distance) everywhere. This messes + * up the NUMA heuristics which wants the local node to have a smaller + * distance than the others. + * Do some quick checks here and only use the SLIT if it passes. + */ +static __init int slit_valid(struct acpi_table_slit *slit) +{ + int i, j; + int d = slit->locality_count; + for (i = 0; i < d; i++) { + for (j = 0; j < d; j++) { + u8 val = slit->entry[d*i + j]; + if (i == j) { + if (val != LOCAL_DISTANCE) + return 0; + } else if (val <= LOCAL_DISTANCE) + return 0; + } + } + return 1; +} + static int __init acpi_parse_slit(struct acpi_table_header *table) { struct acpi_table_slit *slit; - u32 localities; if (!table) return -EINVAL; slit = (struct acpi_table_slit *)table; - /* downcast just for %llu vs %lu for i386/ia64 */ - localities = (u32) slit->locality_count; - + if (!slit_valid(slit)) { + printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); + return -EINVAL; + } acpi_numa_slit_init(slit); return 0; -- cgit v0.10.2 From a66b34b26fe1b0983c6d91b6381df806cd98886e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: proper prototype for acpi_processor_tstate_has_changed() This patch adds a proper prototype for acpi_processor_tstate_has_changed() in include/acpi/processor.h Signed-off-by: Adrian Bunk Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 386e5aa..9dd0fa9 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -86,7 +86,6 @@ static int acpi_processor_info_open_fs(struct inode *inode, struct file *file); static void acpi_processor_notify(acpi_handle handle, u32 event, void *data); static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu); static int acpi_processor_handle_eject(struct acpi_processor *pr); -extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 06480bc..06ebb6e 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -319,6 +319,7 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr) #endif /* CONFIG_CPU_FREQ */ /* in processor_throttling.c */ +int acpi_processor_tstate_has_changed(struct acpi_processor *pr); int acpi_processor_get_throttling_info(struct acpi_processor *pr); extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state); extern struct file_operations acpi_processor_throttling_fops; -- cgit v0.10.2 From 1fdd68608614cd1e951fd93873fe5597374e8c54 Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 9 Jun 2008 16:22:25 -0700 Subject: dock.c remove trailing printk whitespace Signed-off-by: Tim Pepper Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index fa44fb9..96c542f 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -834,7 +834,7 @@ static int dock_add(acpi_handle handle) goto dock_add_err; } - printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION); + printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION); return 0; -- cgit v0.10.2 From 7efd52a407bed6a2b02015b8ebbff7beba155392 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: bay: exit if notify handler cannot be installed If acpi_install_notify_handler() for a bay device fails, the bay driver is superfluous. Most likely, another driver (like libata) is already caring about this device anyway. Furthermore, register_hotplug_dock_device(acpi_handle) from the dock driver must not be called twice with the same handler. This would result in an endless loop consuming 100% of CPU. So clean up and exit. Signed-off-by: Holger Macht Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index d2fc941..26038c2 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -301,16 +301,20 @@ static int bay_add(acpi_handle handle, int id) */ pdev->dev.uevent_suppress = 0; - if (acpi_bay_add_fs(new_bay)) { - platform_device_unregister(new_bay->pdev); - goto bay_add_err; - } - /* register for events on this device */ status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, bay_notify, new_bay); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing bay notify handler\n"); + printk(KERN_INFO PREFIX "Error installing bay notify handler\n"); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; + } + + if (acpi_bay_add_fs(new_bay)) { + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + bay_notify); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; } /* if we are on a dock station, we should register for dock -- cgit v0.10.2 From 46a21e465e506bcd4dba759a39e7ef79978a705d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 9 Jun 2008 16:22:26 -0700 Subject: ACPI: use memory_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 769f248..5bd2dec 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -77,7 +77,6 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; - ssize_t ret_count = count; status = acpi_get_table(table_attr->name, table_attr->instance, @@ -85,18 +84,8 @@ static ssize_t acpi_table_show(struct kobject *kobj, if (ACPI_FAILURE(status)) return -ENODEV; - if (offset >= table_header->length) { - ret_count = 0; - goto end; - } - - if (offset + ret_count > table_header->length) - ret_count = table_header->length - offset; - - memcpy(buf, ((char *)table_header) + offset, ret_count); - - end: - return ret_count; + return memory_read_from_buffer(buf, count, &offset, + table_header, table_header->length); } static void acpi_table_attr_init(struct acpi_table_attr *table_attr, -- cgit v0.10.2 From 7aa7d4336df34e32195557a1ad422627bd69ef0b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:00:32 +0800 Subject: ACPICA: Fix to allow zero-length ASL field declarations Allows null field list in Field(), BankField(), and IndexField(). 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 http://bugzilla.kernel.org/show_bug.cgi?id=10606 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c index c780783..f988a5e 100644 --- a/drivers/acpi/dispatcher/dsfield.c +++ b/drivers/acpi/dispatcher/dsfield.c @@ -450,10 +450,6 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, return_ACPI_STATUS(AE_BAD_PARAMETER); } - if (!arg) { - return_ACPI_STATUS(AE_AML_NO_OPERAND); - } - /* Creating new namespace node(s), should not already exist */ flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | @@ -467,6 +463,7 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, /* * Walk the list of entries in the field_list + * Note: field_list can be of zero length. In this case, Arg will be NULL. */ while (arg) { /* -- cgit v0.10.2 From bc45b1d39a925b56796bebf8a397a0491489d85c Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:12:50 +0800 Subject: ACPICA: Ignore ACPI table signature for Load() operator Only "SSDT" is acceptable to the ACPI spec, but tables are seen with OEMx and null sigs. Therefore, signature validation is worthless. Apparently MS ACPI accepts such signatures, ACPICA must be compatible. http://bugzilla.kernel.org/show_bug.cgi?id=10454 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c index 402f93e..5336ce8 100644 --- a/drivers/acpi/tables/tbinstal.c +++ b/drivers/acpi/tables/tbinstal.c @@ -123,24 +123,13 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, } } - /* The table must be either an SSDT or a PSDT or an OEMx */ - - if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&& - !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&& - strncmp(table_desc->pointer->signature, "OEM", 3)) { - /* Check for a printable name */ - if (acpi_ut_valid_acpi_name( - *(u32 *) table_desc->pointer->signature)) { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "[%4.4s], must be SSDT or PSDT", - table_desc->pointer->signature)); - } else { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "(0x%8.8X), must be SSDT or PSDT", - *(u32 *) table_desc->pointer->signature)); - } - return_ACPI_STATUS(AE_BAD_SIGNATURE); - } + /* + * Originally, we checked the table signature for "SSDT" or "PSDT" here. + * Next, we added support for OEMx tables, signature "OEM". + * Valid tables were encountered with a null signature, so we've just + * given up on validating the signature, since it seems to be a waste + * of code. The original code was removed (05/2008). + */ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); -- cgit v0.10.2 From 0bda3f2f86e233b00b46d91b07db25dd23ec15bc Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:14:17 +0800 Subject: ACPICA: Fix for Load operator, load table at the namespace root This reverts a change introduced in version 20071019. The table is now loaded at the namespace root even though this goes against the ACPI specification. This provides compatibility with other ACPI implementations. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 24da921..39d7421 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -375,9 +375,15 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, goto cleanup; } + /* + * Add the table to the namespace. + * + * Note: We load the table objects relative to the root of the namespace. + * This appears to go against the ACPI specification, but we do it for + * compatibility with other ACPI implementations. + */ status = - acpi_ex_add_table(table_index, walk_state->scope_info->scope.node, - &ddb_handle); + acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle); if (ACPI_FAILURE(status)) { /* On error, table_ptr was deallocated above */ -- cgit v0.10.2 From d52c79ace60a2e2b22455fd195ff4bc8e7afa177 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:26:57 +0800 Subject: ACPICA: Fix to make _SST method optional Fixes a problem introduced in 20080514 where the status of execution of _SST is incorrectly returned to the caller. _SST is optional, and if it is AE_NOT_FOUND, the exception should be ignored. http://www.acpica.org/bugzilla/show_bug.cgi?id=716 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c index d9937e0..dba3cfb 100644 --- a/drivers/acpi/hardware/hwsleep.c +++ b/drivers/acpi/hardware/hwsleep.c @@ -223,15 +223,17 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) break; } - /* Set the system indicators to show the desired sleep state. */ - + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { ACPI_EXCEPTION((AE_INFO, status, "While executing method _SST")); } - return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) -- cgit v0.10.2 From 8410565f540db87ca938f56f92780d251e4f157d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:29:26 +0800 Subject: ACPICA: Fix for access to deleted object Fixes problem introduced in 20080123, with fix for Unload operator. Parse tree object can be already deleted; must use the opcode within the WalkState. ACPI: kmemcheck: Caught 16-bit read from freed memory http://bugzilla.kernel.org/show_bug.cgi?id=10669 Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c index f1e8bf6..e944637 100644 --- a/drivers/acpi/parser/psargs.c +++ b/drivers/acpi/parser/psargs.c @@ -268,7 +268,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, */ if (ACPI_SUCCESS(status) && possible_method_call && (node->type == ACPI_TYPE_METHOD)) { - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { /* * acpi_ps_get_next_namestring has increased the AML pointer, * so we need to restore the saved AML pointer for method call. @@ -691,7 +691,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, /* To support super_name arg of Unload */ - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { status = acpi_ps_get_next_namepath(walk_state, parser_state, arg, -- cgit v0.10.2 From a39a2d7c72b358c6253a2ec28e17b023b7f6f41c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 19 May 2008 15:55:15 -0700 Subject: ACPI: Reject below-freezing temperatures as invalid critical temperatures My laptop thinks that it's a good idea to give -73C as the critical CPU temperature.... which isn't the best thing since it causes a shutdown right at bootup. Temperatures below freezing are clearly invalid critical thresholds so just reject these as such. Signed-off-by: Arjan van de Ven Acked-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 504385b..84c795f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -364,10 +364,17 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tz->trips.critical.temperature); - if (ACPI_FAILURE(status)) { + /* + * Treat freezing temperatures as invalid as well; some + * BIOSes return really low values and cause reboots at startup. + * Below zero (Celcius) values clearly aren't right for sure.. + * ... so lets discard those as invalid. + */ + if (ACPI_FAILURE(status) || + tz->trips.critical.temperature <= 2732) { tz->trips.critical.flags.valid = 0; ACPI_EXCEPTION((AE_INFO, status, - "No critical threshold")); + "No or invalid critical threshold")); return -ENODEV; } else { tz->trips.critical.flags.valid = 1; -- cgit v0.10.2 From 3549dba2c334e82df90f5e00ff85d2a7a2cdd1af Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 6 Jun 2008 15:32:39 -0400 Subject: ACPICA: fix stray va_end() caused by mis-merge Signed-off-by: Len Brown diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index e4ba719..1f057b7 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -1048,6 +1048,7 @@ acpi_ut_exception(char *module_name, va_start(args, format); acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); + va_end(args); } EXPORT_SYMBOL(acpi_ut_exception); @@ -1063,7 +1064,6 @@ acpi_ut_warning(char *module_name, u32 line_number, char *format, ...) acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); va_end(args); - va_end(args); } void ACPI_INTERNAL_VAR_XFACE -- cgit v0.10.2 From 4623236619ff5ce233136d13ee2747c194a63591 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jun 2008 21:40:43 -0700 Subject: dev_set_name: fix missing kernel-doc Fix kernel-doc for new dev_set_name() function: Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index 422cfca..ee0a51a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -762,6 +762,7 @@ static void device_remove_class_symlinks(struct device *dev) /** * dev_set_name - set a device name * @dev: device + * @fmt: format string for the device's name */ int dev_set_name(struct device *dev, const char *fmt, ...) { -- cgit v0.10.2 From acccafe9ca63eac3a202d8805d286ada6ab8cced Mon Sep 17 00:00:00 2001 From: David Brigada Date: Wed, 11 Jun 2008 13:27:32 -0400 Subject: kobject: Documentation Spelling Patch Signed-off-by: David Brigada Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index bf3256e..51a8021 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -305,7 +305,7 @@ should not be manipulated by any other user. A kset keeps its children in a standard kernel linked list. Kobjects point back to their containing kset via their kset field. In almost all cases, -the kobjects belonging to a ket have that kset (or, strictly, its embedded +the kobjects belonging to a kset have that kset (or, strictly, its embedded kobject) in their parent. As a kset contains a kobject within it, it should always be dynamically -- cgit v0.10.2 From 6460a261b5893e769a314c246faec31bbc4aad9c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 21:21:03 +0200 Subject: USB: fix build bug in USB_ISIGHTFW USB: fix build bug in USB_ISIGHTFW -tip tree testing found this build bug: drivers/built-in.o: In function `isight_firmware_load': isight_firmware.c:(.text+0x1ade08): undefined reference to `request_firmware' isight_firmware.c:(.text+0x1adf9c): undefined reference to `release_firmware' select FW_LOADER in USB_ISIGHTFW. From: Ingo Molnar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index eb6c069..001789c 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -272,6 +272,7 @@ config USB_TEST config USB_ISIGHTFW tristate "iSight firmware loading support" depends on USB + select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing them to be driven by the USB video class driver available at -- cgit v0.10.2 From 62b5884875fcd4babf6c0c377046f226abbfe491 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 6 Jun 2008 12:35:15 -0700 Subject: isight_firmware: Avoid crash on loading invalid firmware Different tools generate slightly different formats of the isight firmware. Ensure that the firmware buffer is not overrun, while still ensuring that the correct amount of data is written if trailing data is present. Signed-off-by: Matthew Garrett Report-by: Justin Mattock Tested-by: Justin Mattock Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index 390e048..9f30aa1 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -39,9 +39,12 @@ static int isight_firmware_load(struct usb_interface *intf, struct usb_device *dev = interface_to_usbdev(intf); int llen, len, req, ret = 0; const struct firmware *firmware; - unsigned char *buf; + unsigned char *buf = kmalloc(50, GFP_KERNEL); unsigned char data[4]; - char *ptr; + u8 *ptr; + + if (!buf) + return -ENOMEM; if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { printk(KERN_ERR "Unable to load isight firmware\n"); @@ -59,7 +62,7 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - while (1) { + while (ptr+4 <= firmware->data+firmware->size) { memcpy(data, ptr, 4); len = (data[0] << 8 | data[1]); req = (data[2] << 8 | data[3]); @@ -71,10 +74,14 @@ static int isight_firmware_load(struct usb_interface *intf, continue; for (; len > 0; req += 50) { - llen = len > 50 ? 50 : len; + llen = min(len, 50); len -= llen; - - buf = kmalloc(llen, GFP_KERNEL); + if (ptr+llen > firmware->data+firmware->size) { + printk(KERN_ERR + "Malformed isight firmware"); + ret = -ENODEV; + goto out; + } memcpy(buf, ptr, llen); ptr += llen; @@ -89,16 +96,18 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - kfree(buf); } } + if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1, 300) != 1) { printk(KERN_ERR "isight firmware loading completion failed\n"); ret = -ENODEV; } + out: + kfree(buf); release_firmware(firmware); return ret; } -- cgit v0.10.2 From e6942d633be61f1638e08c56ab8244fc9f1c61e3 Mon Sep 17 00:00:00 2001 From: Nate Case Date: Wed, 21 May 2008 16:28:20 -0500 Subject: USB: isp1760: Assign resource fields before adding hcd This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: Nate Case Acked-by: Sebastian Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9cec87..65aa5ec 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -2207,14 +2207,14 @@ struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, goto err_put; } - ret = usb_add_hcd(hcd, irq, irqflags); - if (ret) - goto err_unmap; - hcd->irq = irq; hcd->rsrc_start = res_start; hcd->rsrc_len = res_len; + ret = usb_add_hcd(hcd, irq, irqflags); + if (ret) + goto err_unmap; + return hcd; err_unmap: -- cgit v0.10.2 From 5340ba827b6269ccd2dcfd3d966626d9dd75d5d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 10 Jun 2008 14:59:43 -0400 Subject: USB: don't use reset-resume if drivers don't support it This patch tries to identify which devices are able to accept reset-resume handling, by checking that there is at least one interface driver bound and that all of the drivers have a reset_resume method defined. If these conditions don't hold then during resume processing, the device is logicall disconnected. This is only a temporary fix. Later on we will explicitly unbind drivers that can't handle reset-resumes. Signed-off-by: Linus Torvalds Signed-off-by: Alan Stern Cc: Oliver Neukum Cc: Pavel Machek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8eb4da3..94789be 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -644,6 +644,48 @@ static void hub_stop(struct usb_hub *hub) #ifdef CONFIG_PM +/* Try to identify which devices need USB-PERSIST handling */ +static int persistent_device(struct usb_device *udev) +{ + int i; + int retval; + struct usb_host_config *actconfig; + + /* Explicitly not marked persistent? */ + if (!udev->persist_enabled) + return 0; + + /* No active config? */ + actconfig = udev->actconfig; + if (!actconfig) + return 0; + + /* FIXME! We should check whether it's open here or not! */ + + /* + * Check that all the interface drivers have a + * 'reset_resume' entrypoint + */ + retval = 0; + for (i = 0; i < actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *intf; + struct usb_driver *driver; + + intf = actconfig->interface[i]; + if (!intf->dev.driver) + continue; + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume) + return 0; + /* + * We have at least one driver, and that one + * has a reset_resume method. + */ + retval = 1; + } + return retval; +} + static void hub_restart(struct usb_hub *hub, int type) { struct usb_device *hdev = hub->hdev; @@ -689,8 +731,8 @@ static void hub_restart(struct usb_hub *hub, int type) * turn off the various status changes to prevent * khubd from disconnecting it later. */ - if (udev->persist_enabled && status == 0 && - !(portstatus & USB_PORT_STAT_ENABLE)) { + if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) && + persistent_device(udev)) { if (portchange & USB_PORT_STAT_C_ENABLE) clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); -- cgit v0.10.2 From 20c61fbd8deb2ada0ac3acecf6156a986dbfff2d Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 28 Apr 2008 14:40:55 +0900 Subject: ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER). Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 26b83e5..ce794d6 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -874,6 +874,8 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, return -EINVAL; if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0))) return -EFAULT; + if (gsf.gf_group.ss_family != AF_INET6) + return -EADDRNOTAVAIL; lock_sock(sk); err = ip6_mc_msfget(sk, &gsf, (struct group_filter __user *)optval, optlen); -- cgit v0.10.2 From 36e3deae8ba84865fd9eb3f2f21bbc00d49b7544 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Tue, 13 May 2008 02:52:55 +0900 Subject: ipv6 route: Fix route lifetime in netlink message. 1) We may have route lifetime larger than INT_MAX. In that case we had wired value in lifetime. Use INT_MAX if lifetime does not fit in s32. 2) Lifetime is valid iif RTF_EXPIRES is set. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 220cffe..d1f3e19 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2196,8 +2196,12 @@ static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt, NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric); - expires = (rt->rt6i_flags & RTF_EXPIRES) ? - rt->rt6i_expires - jiffies : 0; + if (!(rt->rt6i_flags & RTF_EXPIRES)) + expires = 0; + else if (rt->rt6i_expires - jiffies < INT_MAX) + expires = rt->rt6i_expires - jiffies; + else + expires = INT_MAX; if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0, expires, rt->u.dst.error) < 0) -- cgit v0.10.2 From e8766fc86b34d44a8c55a2f9d71da69e091b1ca4 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 10 Jun 2008 15:50:55 +0800 Subject: ipv6: Check the hop limit setting in ancillary data. When specifing the outgoing hop limit as ancillary data for sendmsg(), the kernel doesn't check the integer hop limit value as specified in [RFC-3542] section 6.3. Signed-off-by: Shan Wei Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index b9c2de8..0f0f94a 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -705,6 +705,11 @@ int datagram_send_ctl(struct net *net, } *hlimit = *(int *)CMSG_DATA(cmsg); + if (*hlimit < -1 || *hlimit > 0xff) { + err = -EINVAL; + goto exit_f; + } + break; case IPV6_TCLASS: -- cgit v0.10.2 From 28d4488216645cd71402925cffde9528b0cfdb7e Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 12 Jun 2008 03:14:51 +0900 Subject: ipv6: Check IPV6_MULTICAST_LOOP option value. Only 0 and 1 are valid for IPV6_MULTICAST_LOOP socket option, and we should return an error of EINVAL otherwise, per RFC3493. Based on patch from Shan Wei . Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index ce794d6..9a36971 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -458,6 +458,8 @@ done: case IPV6_MULTICAST_LOOP: if (optlen < sizeof(int)) goto e_inval; + if (val != valbool) + goto e_inval; np->mc_loop = valbool; retv = 0; break; -- cgit v0.10.2 From 1717699cd5130009b7cd6756e883d8582c1fe706 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 12 Jun 2008 03:27:26 +0900 Subject: ipv6: Fail with appropriate error code when setting not-applicable sockopt. IPV6_MULTICAST_HOPS, for example, is not valid for stream sockets. Since they are virtually unavailable for stream sockets, we should return ENOPROTOOPT instead of EINVAL. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9a36971..c042ce1 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -67,7 +67,7 @@ int ip6_ra_control(struct sock *sk, int sel, void (*destructor)(struct sock *)) /* RA packet may be delivered ONLY to IPPROTO_RAW socket */ if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW) - return -EINVAL; + return -ENOPROTOOPT; new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL; @@ -446,7 +446,7 @@ done: case IPV6_MULTICAST_HOPS: if (sk->sk_type == SOCK_STREAM) - goto e_inval; + break; if (optlen < sizeof(int)) goto e_inval; if (val > 255 || val < -1) @@ -466,7 +466,7 @@ done: case IPV6_MULTICAST_IF: if (sk->sk_type == SOCK_STREAM) - goto e_inval; + break; if (optlen < sizeof(int)) goto e_inval; @@ -862,7 +862,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, if (sk->sk_protocol != IPPROTO_UDP && sk->sk_protocol != IPPROTO_UDPLITE && sk->sk_protocol != IPPROTO_TCP) - return -EINVAL; + return -ENOPROTOOPT; if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; val = sk->sk_family; -- cgit v0.10.2 From b66985b11b8b00e1ec65b89a3112510ac9a9ec6e Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Wed, 11 Jun 2008 17:50:27 -0700 Subject: netfilter: Make nflog quiet when no one listen in userspace. The message "nf_log_packet: can't log since no backend logging module loaded in! Please either load one, or disable logging explicitly" was displayed for each logged packet when no userspace application is listening to nflog events. The message seems to warn for a problem with a kernel module missing but as said before this is not the case. I thus propose to suppress the message (I don't see any reason to flood the log because a user application has crashed.) Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index bc11d70..9fda6ee 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -92,10 +92,6 @@ void nf_log_packet(int pf, vsnprintf(prefix, sizeof(prefix), fmt, args); va_end(args); logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix); - } else if (net_ratelimit()) { - printk(KERN_WARNING "nf_log_packet: can\'t log since " - "no backend logging module loaded in! Please either " - "load one, or disable logging explicitly\n"); } rcu_read_unlock(); } -- cgit v0.10.2 From ceeff7541e5a4ba8e8d97ffbae32b3f283cb7a3f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 11 Jun 2008 17:51:10 -0700 Subject: netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info() When creation of a new conntrack entry in ctnetlink fails after having set up the NAT mappings, the conntrack has an extension area allocated that is not getting properly destroyed when freeing the conntrack again. This means the NAT extension is still in the bysource hash, causing a crash when walking over the hash chain the next time: BUG: unable to handle kernel paging request at 00120fbd IP: [] nf_nat_setup_info+0x221/0x58a *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Pid: 2795, comm: conntrackd Not tainted (2.6.26-rc5 #1) EIP: 0060:[] EFLAGS: 00010206 CPU: 1 EIP is at nf_nat_setup_info+0x221/0x58a EAX: 00120fbd EBX: 00120fbd ECX: 00000001 EDX: 00000000 ESI: 0000019e EDI: e853bbb4 EBP: e853bbc8 ESP: e853bb78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process conntrackd (pid: 2795, ti=e853a000 task=f7de10f0 task.ti=e853a000) Stack: 00000000 e853bc2c e85672ec 00000008 c0561084 63c1db4a 00000000 00000000 00000000 0002e109 61d2b1c3 00000000 00000000 00000000 01114e22 61d2b1c3 00000000 00000000 f7444674 e853bc04 00000008 c038e728 0000000a f7444674 Call Trace: [] nla_parse+0x5c/0xb0 [] ctnetlink_change_status+0x190/0x1c6 [] ctnetlink_new_conntrack+0x189/0x61f [] update_curr+0x3d/0x52 [] nfnetlink_rcv_msg+0xc1/0xd8 [] nfnetlink_rcv_msg+0x18/0xd8 [] nfnetlink_rcv_msg+0x0/0xd8 [] netlink_rcv_skb+0x2d/0x71 [] nfnetlink_rcv+0x19/0x24 [] netlink_unicast+0x1b3/0x216 ... Move invocation of the extension destructors to nf_conntrack_free() to fix this problem. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10875 Reported-and-Tested-by: Krzysztof Piotr Oledzki Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index c4b1799..662c1cc 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -196,8 +196,6 @@ destroy_conntrack(struct nf_conntrack *nfct) if (l4proto && l4proto->destroy) l4proto->destroy(ct); - nf_ct_ext_destroy(ct); - rcu_read_unlock(); spin_lock_bh(&nf_conntrack_lock); @@ -520,6 +518,7 @@ static void nf_conntrack_free_rcu(struct rcu_head *head) void nf_conntrack_free(struct nf_conn *ct) { + nf_ct_ext_destroy(ct); call_rcu(&ct->rcu, nf_conntrack_free_rcu); } EXPORT_SYMBOL_GPL(nf_conntrack_free); -- cgit v0.10.2 From 0761248f08ccd94ddceb5454eb1ad96626b10611 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:50 -0700 Subject: ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() The branches are dead code. even when dev->flag IFF_MULTICAST (defined 0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to 0. Signed-off-by: Roel Kluin Cc: Francois Romieu Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 9b358f6..679a082 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -577,12 +577,12 @@ static void ipg_nic_set_multicast_list(struct net_device *dev) /* NIC to be configured in promiscuous mode. */ receivemode = IPG_RM_RECEIVEALLFRAMES; } else if ((dev->flags & IFF_ALLMULTI) || - (dev->flags & IFF_MULTICAST & + ((dev->flags & IFF_MULTICAST) && (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) { /* NIC to be configured to receive all multicast * frames. */ receivemode |= IPG_RM_RECEIVEMULTICAST; - } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) { + } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) { /* NIC to be configured to receive selected * multicast addresses. */ receivemode |= IPG_RM_RECEIVEMULTICASTHASH; -- cgit v0.10.2 From 8b9835108f68938a5f7e74fd2c0fc65da2abad92 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:51 -0700 Subject: fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin Acked-by: Sylvain Munaut Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 5f9c42e..329edd9 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -78,7 +78,7 @@ module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe"); #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN ) + NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP) static int debug = -1; /* the above default */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debugging messages level"); -- cgit v0.10.2 From 208aefa2451cc1f4d87622cb9b2ca4333afa8337 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Thu, 15 May 2008 23:26:22 +0200 Subject: drivers/net/r6040.c: correct bad use of round_jiffies() Compared to other places in the kernel, I think that this driver misuses the function round_jiffies. Signed-off-by: Christophe Jaillet Signed-off-by: Jeff Garzik diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 169edc1..858b191 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -733,7 +733,7 @@ static void r6040_timer(unsigned long data) } /* Timer active again */ - mod_timer(&lp->timer, jiffies + round_jiffies(HZ)); + mod_timer(&lp->timer, round_jiffies(jiffies + HZ)); } /* Read/set MAC address routines */ -- cgit v0.10.2 From f595ec964daf7f99668039d7303ddedd09a75142 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:47:56 +0200 Subject: common implementation of iterative div/mod We have a few instances of the open-coded iterative div/mod loop, used when we don't expcet the dividend to be much bigger than the divisor. Unfortunately modern gcc's have the tendency to strength "reduce" this into a full mod operation, which isn't necessarily any faster, and even if it were, doesn't exist if gcc implements it in libgcc. The workaround is to put a dummy asm statement in the loop to prevent gcc from performing the transformation. This patch creates a single implementation of this loop, and uses it to replace the open-coded versions I know about. Signed-off-by: Jeremy Fitzhardinge Cc: Andrew Morton Cc: john stultz Cc: Segher Boessenkool Cc: Christian Kujau Cc: Robert Hancock Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5..52b2e38 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -150,11 +151,7 @@ static void do_stolen_accounting(void) if (stolen < 0) stolen = 0; - ticks = 0; - while (stolen >= NS_PER_TICK) { - ticks++; - stolen -= NS_PER_TICK; - } + ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen); __get_cpu_var(residual_stolen) = stolen; account_steal_time(NULL, ticks); @@ -166,11 +163,7 @@ static void do_stolen_accounting(void) if (blocked < 0) blocked = 0; - ticks = 0; - while (blocked >= NS_PER_TICK) { - ticks++; - blocked -= NS_PER_TICK; - } + ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked); __get_cpu_var(residual_blocked) = blocked; account_steal_time(idle_task(smp_processor_id()), ticks); } diff --git a/include/linux/math64.h b/include/linux/math64.h index c1a5f81..177785e 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -81,4 +81,6 @@ static inline s64 div_s64(s64 dividend, s32 divisor) } #endif +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); + #endif /* _LINUX_MATH64_H */ diff --git a/include/linux/time.h b/include/linux/time.h index d32ef0a..05f9517 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -6,6 +6,7 @@ #ifdef __KERNEL__ # include # include +# include #endif #ifndef _STRUCT_TIMESPEC @@ -172,15 +173,7 @@ extern struct timeval ns_to_timeval(const s64 nsec); */ static inline void timespec_add_ns(struct timespec *a, u64 ns) { - ns += a->tv_nsec; - while(unlikely(ns >= NSEC_PER_SEC)) { - /* The following asm() prevents the compiler from - * optimising this loop into a modulo operation. */ - asm("" : "+r"(ns)); - - ns -= NSEC_PER_SEC; - a->tv_sec++; - } + a->tv_sec += iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } #endif /* __KERNEL__ */ diff --git a/lib/div64.c b/lib/div64.c index bb5bd0c..76c0154 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -98,3 +98,26 @@ EXPORT_SYMBOL(div64_u64); #endif #endif /* BITS_PER_LONG == 32 */ + +/* + * Iterative div/mod for use when dividend is not expected to be much + * bigger than divisor. + */ +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} +EXPORT_SYMBOL(iter_div_u64_rem); -- cgit v0.10.2 From d5e181f78ac753893eb930868a52a4488cd3de0a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:47:58 +0200 Subject: add an inlined version of iter_div_u64_rem iter_div_u64_rem is used in the x86-64 vdso, which cannot call other kernel code. For this case, provide the always_inlined version, __iter_div_u64_rem. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar diff --git a/include/linux/math64.h b/include/linux/math64.h index 177785e..c87f152 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -83,4 +83,23 @@ static inline s64 div_s64(s64 dividend, s32 divisor) u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); +static __always_inline u32 +__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} + #endif /* _LINUX_MATH64_H */ diff --git a/lib/div64.c b/lib/div64.c index 76c0154..a111eb8 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -105,19 +105,6 @@ EXPORT_SYMBOL(div64_u64); */ u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) { - u32 ret = 0; - - while (dividend >= divisor) { - /* The following asm() prevents the compiler from - optimising this loop into a modulo operation. */ - asm("" : "+rm"(dividend)); - - dividend -= divisor; - ret++; - } - - *remainder = dividend; - - return ret; + return __iter_div_u64_rem(dividend, divisor, remainder); } EXPORT_SYMBOL(iter_div_u64_rem); -- cgit v0.10.2 From 9412e28649d0272df5e4af57bb378926fd4df580 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:48:00 +0200 Subject: always_inline timespec_add_ns timespec_add_ns is used from the x86-64 vdso, which cannot call out to other kernel code. Make sure that timespec_add_ns is always inlined (and only uses always_inlined functions) to make sure there are no unexpected calls. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar diff --git a/include/linux/time.h b/include/linux/time.h index 05f9517..e15206a 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -170,10 +170,13 @@ extern struct timeval ns_to_timeval(const s64 nsec); * timespec_add_ns - Adds nanoseconds to a timespec * @a: pointer to timespec to be incremented * @ns: unsigned nanoseconds value to be added + * + * This must always be inlined because its used from the x86-64 vdso, + * which cannot call other kernel functions. */ -static inline void timespec_add_ns(struct timespec *a, u64 ns) +static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) { - a->tv_sec += iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); + a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } #endif /* __KERNEL__ */ -- cgit v0.10.2 From 4bb073c0e32a0862bdb5215d11af19f6c0180c98 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 02:22:02 -0700 Subject: net: Eliminate flush_scheduled_work() calls while RTNL is held. If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4b46e68..367b6d4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; bnx2_netif_stop(bp); bnx2_init_nic(bp); atomic_set(&bp->intr_sem, 1); bnx2_netif_start(bp); - bp->in_reset_task = 0; } static void @@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); u32 reset_code; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ - while (bp->in_reset_task) - msleep(1); + cancel_work_sync(&bp->reset_task); bnx2_disable_int_sync(bp); bnx2_napi_disable(bp); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1eaf5bb..2377cc1 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6656,7 +6656,6 @@ struct bnx2 { int current_interval; struct timer_list timer; struct work_struct reset_task; - int in_reset_task; /* Used to synchronize phy accesses. */ spinlock_t phy_lock; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index faae01d..075fd54 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2605,7 +2605,8 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); - flush_scheduled_work(); + cancel_work_sync(&port->reset_task); + mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index dde9c7e..00bc7fb 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -959,7 +959,7 @@ static int epp_close(struct net_device *dev) unsigned char tmp[1]; bc->work_running = 0; - flush_scheduled_work(); + cancel_delayed_work_sync(&bc->run_work); bc->stat = EPP_DCDBIT; tmp[0] = 0; pp->ops->epp_write_addr(pp, tmp, 1, 0); diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 4e28002..e2ee91a 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -136,7 +136,6 @@ struct smc911x_local { /* work queue */ struct work_struct phy_configure; - int work_pending; int tx_throttle; spinlock_t lock; @@ -960,11 +959,11 @@ static void smc911x_phy_configure(struct work_struct *work) * We should not be called if phy_type is zero. */ if (lp->phy_type == 0) - goto smc911x_phy_configure_exit_nolock; + return; if (smc911x_phy_reset(dev, phyaddr)) { printk("%s: PHY reset timed out\n", dev->name); - goto smc911x_phy_configure_exit_nolock; + return; } spin_lock_irqsave(&lp->lock, flags); @@ -1033,8 +1032,6 @@ static void smc911x_phy_configure(struct work_struct *work) smc911x_phy_configure_exit: spin_unlock_irqrestore(&lp->lock, flags); -smc911x_phy_configure_exit_nolock: - lp->work_pending = 0; } /* @@ -1356,11 +1353,8 @@ static void smc911x_timeout(struct net_device *dev) * smc911x_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; @@ -1531,16 +1525,8 @@ static int smc911x_close(struct net_device *dev) if (lp->phy_type != 0) { /* We need to ensure that no calls to * smc911x_phy_configure are pending. - - * flush_scheduled_work() cannot be called because we - * are running with the netlink semaphore held (from - * devinet_ioctl()) and the pending work queue - * contains linkwatch_event() (scheduled by - * netif_carrier_off() above). linkwatch_event() also - * wants the netlink semaphore. */ - while (lp->work_pending) - schedule(); + cancel_work_sync(&lp->phy_configure); smc911x_phy_powerdown(dev, lp->mii.phy_id); } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index a188e33..f2051b2 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1016,15 +1016,8 @@ static void smc_phy_powerdown(struct net_device *dev) /* We need to ensure that no calls to smc_phy_configure are pending. - - flush_scheduled_work() cannot be called because we are - running with the netlink semaphore held (from - devinet_ioctl()) and the pending work queue contains - linkwatch_event() (scheduled by netif_carrier_off() - above). linkwatch_event() also wants the netlink semaphore. */ - while(lp->work_pending) - yield(); + cancel_work_sync(&lp->phy_configure); bmcr = smc_phy_read(dev, phy, MII_BMCR); smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); @@ -1161,7 +1154,6 @@ static void smc_phy_configure(struct work_struct *work) smc_phy_configure_exit: SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); - lp->work_pending = 0; } /* @@ -1389,11 +1381,8 @@ static void smc_timeout(struct net_device *dev) * smc_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 55670b5..af8d2c4 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -731,7 +731,7 @@ static void tulip_down (struct net_device *dev) void __iomem *ioaddr = tp->base_addr; unsigned long flags; - flush_scheduled_work(); + cancel_work_sync(&tp->media_work); #ifdef CONFIG_TULIP_NAPI napi_disable(&tp->napi); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 0dcfc03..7c66b05 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -706,7 +706,7 @@ static void kaweth_kill_urbs(struct kaweth_device *kaweth) usb_kill_urb(kaweth->rx_urb); usb_kill_urb(kaweth->tx_urb); - flush_scheduled_work(); + cancel_delayed_work_sync(&kaweth->lowmem_work); /* a scheduled work may have resubmitted, we hit them again */ diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 20d387f..f7aec93 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -682,7 +682,13 @@ static int prism2_close(struct net_device *dev) netif_device_detach(dev); } - flush_scheduled_work(); + cancel_work_sync(&local->reset_queue); + cancel_work_sync(&local->set_multicast_list_queue); + cancel_work_sync(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + cancel_work_sync(&local->info_queue); +#endif + cancel_work_sync(&local->comms_qual_update); module_put(local->hw_module); -- cgit v0.10.2 From 2e084786f6fe052274f1dfa7c675fe4a02cacd6e Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 12 Jun 2008 16:42:58 +0800 Subject: sched: fair group: fix overflow(was: fix divide by zero) I found a bug which can be reproduced by this way:(linux-2.6.26-rc5, x86-64) (use 2^32, 2^33, ...., 2^63 as shares value) # mkdir /dev/cpuctl # mount -t cgroup -o cpu cpuctl /dev/cpuctl # cd /dev/cpuctl # mkdir sub # echo 0x8000000000000000 > sub/cpu.shares # echo $$ > sub/tasks oops here! divide by zero. This is because do_div() expects the 2th parameter to be 32 bits, but unsigned long is 64 bits in x86_64. Peter Zijstra pointed it out that the sane thing to do is limit the shares value to something smaller instead of using an even more expensive divide. Also, I found another bug about "the shares value is too large": pid1 and pid2 are set affinity to cpu#0 pid1 is attached to cg1 and pid2 is attached to cg2 if cg1/cpu.shares = 1024 cg2/cpu.shares = 2000000000 then pid2 got 100% usage of cpu, and pid1 0% if cg1/cpu.shares = 1024 cg2/cpu.shares = 20000000000 then pid2 got 0% usage of cpu, and pid1 100% And a weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so the shares value should be limited to a smaller value. I think that (1UL << 18) is a good limited value: 1) it's not too large, we can create a lot of group before overflow 2) it's several times the weight value for nice=-19 (not too small) Signed-off-by: Lai Jiangshan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 2c65bf2..6c1ecbd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -312,12 +312,15 @@ static DEFINE_SPINLOCK(task_group_lock); #endif /* - * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems. + * A weight of 0 or 1 can cause arithmetics problems. + * A weight of a cfs_rq is the sum of weights of which entities + * are queued on this cfs_rq, so a weight of a entity should not be + * too large, so as the shares value of a task group. * (The default weight is 1024 - so there's no practical * limitation from this.) */ #define MIN_SHARES 2 -#define MAX_SHARES (ULONG_MAX - 1) +#define MAX_SHARES (1UL << 18) static int init_task_group_load = INIT_TASK_GROUP_LOAD; #endif -- cgit v0.10.2 From 7a232e0350940d2664f4de5cc3f0f443bae5062d Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 12 Jun 2008 16:43:07 +0800 Subject: sched: 64-bit: fix arithmetics overflow (overflow means weight >= 2^32 here, because inv_weigh = 2^32/weight) A weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so it will overflow when there are too many entities. Although, overflow occurs very rarely, but it break fairness when it occurs. 64-bits systems have more memory than 32-bit systems and 64-bit systems can create more process usually, so overflow may occur more frequently. This patch guarantees fairness when overflow happens on 64-bit systems. Thanks to the optimization of compiler, it changes nothing on 32-bit. Signed-off-by: Lai Jiangshan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 6c1ecbd..eaf6751 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1340,8 +1340,13 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight, { u64 tmp; - if (!lw->inv_weight) - lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1); + if (!lw->inv_weight) { + if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST)) + lw->inv_weight = 1; + else + lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2) + / (lw->weight+1); + } tmp = (u64)delta_exec * weight; /* -- cgit v0.10.2 From 4d7365d664e79710ac0e782a23443471ddf05bdd Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 12 Jun 2008 15:02:55 +0200 Subject: kbuild: ignore powerpc specific symbols in modpost Kumar Gala wrote: We have a case in powerpc in which we want to link some library routines with all module objects. The routines are intended for handling out-of-line function call register save/restore so having them as EXPORT_SYMBOL() is counter productive (we do also need to link the same "library" code into the kernel). Without this patch a powerpc build would error out and fail to build modules with the added register save/restore module. There were two obvious solutions: 1) To link the .o file before the modpost stage 2) To ignore the symbols in modpost Option 1) was ruled out because we do not have any separate linking stage for single file modules. This patch implements option 2 - and do so only for powerpc. The symbols we ignore are all undefined symbols named: _restgpr_*, _savegpr_*, _rest32gpr_*, _save32gpr_* Signed-off-by: Sam Ravnborg Cc: Kumar Gala Cc: Paul Mackerras diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 508c589..a07f91a 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -467,6 +467,25 @@ static void parse_elf_finish(struct elf_info *info) release_file(info->hdr, info->size); } +static int ignore_undef_symbol(struct elf_info *info, const char *symname) +{ + /* ignore __this_module, it will be resolved shortly */ + if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0) + return 1; + /* ignore global offset table */ + if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0) + return 1; + if (info->hdr->e_machine == EM_PPC) + /* Special register function linked on all modules during final link of .ko */ + if (strncmp(symname, "_restgpr_", sizeof("_restgpr_") - 1) == 0 || + strncmp(symname, "_savegpr_", sizeof("_savegpr_") - 1) == 0 || + strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 || + strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0) + return 1; + /* Do not ignore this symbol */ + return 0; +} + #define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_" #define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_" @@ -493,11 +512,7 @@ static void handle_modversions(struct module *mod, struct elf_info *info, if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL && ELF_ST_BIND(sym->st_info) != STB_WEAK) break; - /* ignore global offset table */ - if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0) - break; - /* ignore __this_module, it will be resolved shortly */ - if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0) + if (ignore_undef_symbol(info, symname)) break; /* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */ #if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER) -- cgit v0.10.2 From f969c5672b16b857e5231ad3c78f08d8ef3305aa Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 12 Jun 2008 02:05:26 -0400 Subject: fsl-diu-db: compile fix This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index b50bb03..0a27853 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1320,7 +1320,7 @@ static void free_irq_local(int irq) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) +static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) { struct fsl_diu_data *machine_data; @@ -1330,7 +1330,7 @@ static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) return 0; } -static int fsl_diu_resume(struct of_device *dev) +static int fsl_diu_resume(struct of_device *ofdev) { struct fsl_diu_data *machine_data; -- cgit v0.10.2 From 5a1603be58f11edb1b30cb1e40cfbdd4439289d0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 12 Jun 2008 16:29:55 +0900 Subject: nommu: Correct kobjsize() page validity checks. This implements a few changes on top of the recent kobjsize() refactoring introduced by commit 6cfd53fc03670c7a544a56d441eb1a6cc800d72b. As Christoph points out: virt_to_head_page cannot return NULL. virt_to_page also does not return NULL. pfn_valid() needs to be used to figure out if a page is valid. Otherwise the page struct reference that was returned may have PageReserved() set to indicate that it is not a valid page. As discussed further in the thread, virt_addr_valid() is the preferable way to validate the object pointer in this case. In addition to fixing up the reserved page case, it also has the benefit of encapsulating the hack introduced by commit 4016a1390d07f15b267eecb20e76a48fd5c524ef on the impacted platforms, allowing us to get rid of the extra checking in kobjsize() for the platforms that don't perform this type of bizarre memory_end abuse (every nommu platform that isn't blackfin). If blackfin decides to get in line with every other platform and use PageReserved for the DMA pages in question, kobjsize() will also continue to work fine. It also turns out that compound_order() will give us back 0-order for non-head pages, so we can get rid of the PageCompound check and just use compound_order() directly. Clean that up while we're at it. Signed-off-by: Paul Mundt Reviewed-by: Christoph Lameter Acked-by: David Howells Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index 3abd084..4462b6a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -104,21 +104,15 @@ EXPORT_SYMBOL(vmtruncate); unsigned int kobjsize(const void *objp) { struct page *page; - int order = 0; /* * If the object we have should not have ksize performed on it, * return size of 0 */ - if (!objp) - return 0; - - if ((unsigned long)objp >= memory_end) + if (!objp || !virt_addr_valid(objp)) return 0; page = virt_to_head_page(objp); - if (!page) - return 0; /* * If the allocator sets PageSlab, we know the pointer came from @@ -129,18 +123,9 @@ unsigned int kobjsize(const void *objp) /* * The ksize() function is only guaranteed to work for pointers - * returned by kmalloc(). So handle arbitrary pointers, that we expect - * always to be compound pages, here. - */ - if (PageCompound(page)) - order = compound_order(page); - - /* - * Finally, handle arbitrary pointers that don't set PageSlab. - * Default to 0-order in the case when we're unable to ksize() - * the object. + * returned by kmalloc(). So handle arbitrary pointers here. */ - return PAGE_SIZE << order; + return PAGE_SIZE << compound_order(page); } /* -- cgit v0.10.2 From 14a73f54798f39854e521fb596da7d50b7566bbd Mon Sep 17 00:00:00 2001 From: Carl Henrik Lunde Date: Thu, 12 Jun 2008 20:13:58 +0200 Subject: block: disable IRQs until data is written to relay channel As we may run relay_reserve from interrupt context we must always disable IRQs. This is because a call to relay_reserve may expose previously written data to use space. Updated new message code and an old but related comment. Signed-off-by: Carl Henrik Lunde Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds diff --git a/block/blktrace.c b/block/blktrace.c index 7ae87cc..8d3a277 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -79,16 +79,17 @@ void __trace_note_message(struct blk_trace *bt, const char *fmt, ...) { int n; va_list args; + unsigned long flags; char *buf; - preempt_disable(); + local_irq_save(flags); buf = per_cpu_ptr(bt->msg_data, smp_processor_id()); va_start(args, fmt); n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args); va_end(args); trace_note(bt, 0, BLK_TN_MESSAGE, buf, n); - preempt_enable(); + local_irq_restore(flags); } EXPORT_SYMBOL_GPL(__trace_note_message); @@ -158,10 +159,7 @@ void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, /* * A word about the locking here - we disable interrupts to reserve * some space in the relay per-cpu buffer, to prevent an irq - * from coming in and stepping on our toes. Once reserved, it's - * enough to get preemption disabled to prevent read of this data - * before we are through filling it. get_cpu()/put_cpu() does this - * for us + * from coming in and stepping on our toes. */ local_irq_save(flags); -- cgit v0.10.2 From 3703f39965a197ebd91743fc38d0f640606b8da3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 4 Jun 2008 18:13:37 +0200 Subject: geode: fix modular build -tip testing found this build bug: MODPOST 331 modules ERROR: "geode_mfgpt_toggle_event" [drivers/watchdog/geodewdt.ko] undefined! ERROR: "geode_mfgpt_alloc_timer" [drivers/watchdog/geodewdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 with this config: http://redhat.com/~mingo/misc/config-Wed_Jun__4_18_01_59_CEST_2008.bad export those symbols. Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 3cad17f..07c0f82 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -155,6 +155,7 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) wrmsr(msr, value, dummy); return 0; } +EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event); int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) { @@ -222,6 +223,7 @@ int geode_mfgpt_alloc_timer(int timer, int domain) /* No timers available - too bad */ return -1; } +EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); #ifdef CONFIG_GEODE_MFGPT_TIMER -- cgit v0.10.2 From b29c701deacd5d24453127c37ed77ef851c53b8b Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: fix endless page faults in mount_block_root for Linux 2.6 Page faults in kernel address space between PAGE_OFFSET up to VMALLOC_START should not try to map as vmalloc. Fix rarely endless page faults inside mount_block_root for root filesystem at boot time. All 32bit kernels up to 2.6.25 can fail into this hole. I can not present this under native linux kernel. I see, that the 64bit has fixed the problem. I copied the same lines into 32bit part. Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation): http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt The physicaly memory was trimmed down to 192MB to better catch the bug. More memory gets the bug more rarely. Details, how every x86 32bit system can fail: Start from "mount_block_root", http://lxr.linux.no/linux/init/do_mounts.c#L297 There the variable "fs_names" got one memory page with 4096 bytes. Variable "p" walks through the existing file system types. The first string is no problem. But, with the second loop in mount_block_root the offset of "p" is not at beginning of page, the offset is for example +9, if "reiserfs" is the first in list. Than calls do_mount_root, and lands in sys_mount. Remember: Variable "type_page" contains now "fs_type+9" and not contains a full page. The sys_mount copies 4096 bytes with function "exact_copy_from_user()": http://lxr.linux.no/linux/fs/namespace.c#L1540 Mostly exist pages after the buffer "fs_names+4096+9" and the page fault handler was not called. No problem. In the case, if the page after "fs_names+4096" is not mapped, the page fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320 The do_page_fault gots an address 0xc03b4000. It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's from "__getname()" alias "kmem_cache_alloc". The "error_code" is 0. "vmalloc_fault" will be call: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332 "vmalloc_fault" tryed to find the physical page for a non existing virtual memory area. The macro "pte_present" in vmalloc_fault() got a next page fault for 0xc0000ed0 at: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282 No PTE exist for such virtual address. The page fault handler was trying to sync the physical page for the PTE lockup. This called vmalloc_fault() again for address 0xc000000, and that also was not existing. The endless began... In normal case the cpu would still loop with disabled interrrupts. Under coLinux this was catched by a stack overflow inside printk debugs. Signed-off-by: Henry Nestler Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fd7e179..8bcb6f4 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -497,6 +497,11 @@ static int vmalloc_fault(unsigned long address) unsigned long pgd_paddr; pmd_t *pmd_k; pte_t *pte_k; + + /* Make sure we are in vmalloc area */ + if (!(address >= VMALLOC_START && address < VMALLOC_END)) + return -1; + /* * Synchronize this task's top level page-table * with the 'reference' page table. -- cgit v0.10.2 From 86b2b70e156203149c3861455feec54bc4906e6d Mon Sep 17 00:00:00 2001 From: Joe Korty Date: Mon, 2 Jun 2008 17:21:06 -0400 Subject: x86: fix asm warning in head_32.S On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote: > It also causes these warnings on 32-bit PAE: > > AS arch/x86/kernel/head_32.o > arch/x86/kernel/head_32.S: Assembler messages: > arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed > arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed > > and I do not see why (the end result seems to be identical). Fix head_32.S gcc bignum warnings when CONFIG_PAE=y. arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed The assembler was stumbling over the 64-bit constant 0x100000000 in the KPMDS #define. Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged. Signed-off-by: Joe Korty Cc: Theodore Tso Cc: Gabriel C Cc: Keith Packard Cc: "Pallipadi Venkatesh" Cc: Eric Anholt Cc: "Siddha Suresh B" Cc: bugme-daemon@bugzilla.kernel.org Cc: airlied@linux.ie Cc: "Barnes Jesse" Cc: Jeremy Fitzhardinge Cc: Andrew Morton Cc: "Rafael J. Wysocki" Cc: Linus Torvalds Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc737..f7357cc 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -189,7 +189,7 @@ default_entry: * this stage. */ -#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */ +#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */ xorl %ebx,%ebx /* %ebx is kept at zero */ -- cgit v0.10.2 From 0b6a39f7ebcb1c82587ce35b401c513eed41ac5c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 9 Jun 2008 13:29:43 +0200 Subject: Revert "x86: fix ioapic bug again" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 6e908947b4995bc0e551a8257c586d5c3e428201. Németh Márton reported: | there is a problem in 2.6.26-rc3 which was not there in case of | 2.6.25: the CPU wakes up ~90,000 times per sec instead of ~60 per sec. | | I also "git bisected" the problem, the result is: | | 6e908947b4995bc0e551a8257c586d5c3e428201 is first bad commit | commit 6e908947b4995bc0e551a8257c586d5c3e428201 | Author: Ingo Molnar | Date: Fri Mar 21 14:32:36 2008 +0100 | | x86: fix ioapic bug again the original problem is fixed by Maciej W. Rozycki in the tip/x86/apic branch (confirmed by Márton), but those changes are too intrusive for v2.6.26 so we'll go for the less intrusive (repeated) revert now. Reported-and-bisected-by: Németh Márton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54f..4dc8600d9 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2130,14 +2130,10 @@ static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector; - unsigned int ver; unsigned long flags; local_irq_save(flags); - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - /* * get/set the timer IRQ vector: */ @@ -2150,15 +2146,11 @@ static inline void __init check_timer(void) * mode for the 8259A whenever interrupts are routed * through I/O APICs. Also IRQ0 has to be enabled in * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. Finally timer interrupts - * need to be acknowledged manually in the 8259A for - * timer_interrupt() and for the i82489DX when using - * the NMI watchdog. + * disabled in the local APIC. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = !cpu_has_tsc; - timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); + timer_ack = 1; if (timer_over_8254 > 0) enable_8259A_irq(0); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bb..84160f7 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -26,7 +26,6 @@ #include #include -#include #include "mach_traps.h" @@ -82,7 +81,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - goto error; + return -1; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -119,7 +118,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - goto error; + return -1; } printk("OK.\n"); @@ -130,10 +129,6 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; -error: - timer_ack = !cpu_has_tsc; - - return -1; } static int __init setup_nmi_watchdog(char *str) -- cgit v0.10.2 From 52aaa12fbe786c90396f1b11ec39c924ccdd8fd5 Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Thu, 5 Jun 2008 19:14:15 +0530 Subject: x86: fix unused variable 'loops' warning in arch/x86/boot/a20.c Following patch fixes the below warning message : arch/x86/boot/a20.c:118: warning: unused variable 'loops' Signed-off-by : Manish Katiyar Signed-off-by: Ingo Molnar diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c index 90943f8..e01aafd 100644 --- a/arch/x86/boot/a20.c +++ b/arch/x86/boot/a20.c @@ -115,8 +115,6 @@ static void enable_a20_fast(void) int enable_a20(void) { - int loops = A20_ENABLE_LOOPS; - #if defined(CONFIG_X86_ELAN) /* Elan croaks if we try to touch the KBC */ enable_a20_fast(); @@ -128,6 +126,7 @@ int enable_a20(void) enable_a20_kbc(); return 0; #else + int loops = A20_ENABLE_LOOPS; while (loops--) { /* First, check to see if A20 is already enabled (legacy free, etc.) */ -- cgit v0.10.2 From e32e58a96de4ac35a03349db2ab69f263ded958f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 6 Jun 2008 10:14:08 +0200 Subject: x86: fix lockdep warning during suspend-to-ram Andrew Morton wrote: > I've been seeing the below for a long time during suspend-to-ram on the Vaio. > > > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... <4>------------[ cut here ]------------ > WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x127() > Modules linked in: i915 drm ipw2200 sonypi ipv6 autofs4 hidp l2cap bluetooth sunrpc nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables acpi_cpufreq nvram ohci1394 ieee1394 ehci_hcd uhci_hcd sg joydev snd_hda_intel snd_seq_dummy sr_mod snd_seq_oss cdrom snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ieee80211 pcspkr ieee80211_crypt snd_pcm i2c_i801 snd_timer i2c_core ide_pci_generic piix snd soundcore snd_page_alloc button ext3 jbd ide_disk ide_core [last unloaded: ipw2200] > Pid: 3250, comm: zsh Not tainted 2.6.26-rc5 #1 > [] warn_on_slowpath+0x41/0x6d > [] ? native_sched_clock+0x82/0x96 > [] ? mark_held_locks+0x41/0x5c > [] ? _spin_unlock_irqrestore+0x36/0x58 > [] ? trace_hardirqs_on+0xe6/0x10d > [] ? __lock_acquire+0xae3/0xb2b > [] ? schedule+0x39b/0x3b4 > [] check_flags+0x4c/0x127 > [] lock_acquire+0x3a/0x86 > [] _spin_lock+0x26/0x53 > [] ? refrigerator+0x13/0xc3 > [] refrigerator+0x13/0xc3 > [] get_signal_to_deliver+0x3c/0x31e > [] do_notify_resume+0x91/0x6ee > [] ? lock_release_holdtime+0x50/0x56 > [] ? _spin_unlock_irqrestore+0x36/0x58 > [] ? read_chan+0x0/0x58c > [] ? trace_hardirqs_on+0xe6/0x10d > [] ? _spin_unlock_irqrestore+0x42/0x58 > [] ? tty_ldisc_deref+0x5c/0x63 > [] ? tty_read+0x66/0x98 > [] ? audit_syscall_exit+0x2aa/0x2c5 > [] ? do_syscall_trace+0x6b/0x16f > [] work_notifysig+0x13/0x1b > ======================= > ---[ end trace 25b49fe59a25afa5 ]--- > possible reason: unannotated irqs-off. > irq event stamp: 58919 > hardirqs last enabled at (58919): [] syscall_exit_work+0x11/0x26 Joy - I so love entry.S Best I can make of it: syscall_exit_work resume_userspace DISABLE_INTERRUPTS (no TRACE_IRQS_OFF) work_pending work_notifysig do_notify_resume() do_signal() get_signal_to_deliver() try_to_freeze() refrigerator() task_lock() -> check_flags() -> BANG The normal path is: syscall_exit_work resume_userspace DISABLE_INTERRUPTS restore_all TRACE_IRQS_IRET iret No idea why that would not warn.. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc..c778e4f 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -248,6 +248,7 @@ ENTRY(resume_userspace) DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret + TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx andl $_TIF_WORK_MASK, %ecx # is there any work to be done on # int/exception return? -- cgit v0.10.2 From eb53e9f3ea859a6d59c37b500593b970aa8562e6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 7 Jun 2008 17:18:40 +0100 Subject: x86: fix an incompatible pointer type warning on 64-bit compilations Fix an incompatible pointer type warning on x86_64 compilations. early_memtest() is passing a u64* to find_e820_area_size() which is expecting an unsigned long. Change t_start and t_size to unsigned long as those are also 64-bit types on x88_64. Signed-off-by: David Howells Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 156e6d7..998a06e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - u64 t_start, t_size; + unsigned long t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016llx - %016llx pattern %d", + printk(KERN_CONT "\n %016lx - %016lx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 4461145ef1be92851c230f858f6b6f457c99670f Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 12 Jun 2008 08:55:59 +0200 Subject: x86, lockdep: fix "WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128()" Alessandro Suardi reported: > Recently upgraded my FC6 desktop to Fedora 9; with the > latest nautilus RPM updates my VNC session went nuts > with nautilus pegging the CPU for everything that breathed. > > I now reverted to an earlier nautilus package, but during > the peak CPU period my kernel spat this: > > [314185.623294] ------------[ cut here ]------------ > [314185.623414] WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128() > [314185.623514] Modules linked in: iptable_filter ip_tables x_tables > sunrpc ipv6 fuse snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart > snd_rawmidi via686a hwmon parport_pc sg parport uhci_hcd ehci_hcd > [314185.623924] Pid: 12314, comm: nautilus Not tainted 2.6.26-rc5-git2 #4 > [314185.624021] [] warn_on_slowpath+0x41/0x7b > [314185.624021] [] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [] ? up_read+0x16/0x28 > [314185.624021] [] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [] ? __lock_acquire+0xbb4/0xbc3 > [314185.624021] [] check_flags+0x4c/0x128 > [314185.624021] [] lock_acquire+0x31/0x7d > [314185.624021] [] __atomic_notifier_call_chain+0x30/0x80 > [314185.624021] [] ? __atomic_notifier_call_chain+0x0/0x80 > [314185.624021] [] atomic_notifier_call_chain+0xc/0xe > [314185.624021] [] notify_die+0x2d/0x2f > [314185.624021] [] do_int3+0x1f/0x4d > [314185.624021] [] int3+0x27/0x2c > [314185.624021] ======================= > [314185.624021] ---[ end trace 1923f65a2d7bb246 ]--- > [314185.624021] possible reason: unannotated irqs-off. > [314185.624021] irq event stamp: 488879 > [314185.624021] hardirqs last enabled at (488879): [] > restore_nocheck+0x12/0x15 > [314185.624021] hardirqs last disabled at (488878): [] > work_resched+0x19/0x30 > [314185.624021] softirqs last enabled at (488876): [] > __do_softirq+0xa6/0xac > [314185.624021] softirqs last disabled at (488865): [] > do_softirq+0x57/0xa6 > > I didn't seem to find it with some googling, so here it is. > > I was incidentally ltracing that process to try and find out > what was gulping down that much CPU (sorry, no idea > whether ltrace and the WARNING happened at the same > time or which came first) and: Yeah, this is extremely likely to be the source of the warning. The warning should be harmless, however. > Box is my trusty noname K7-800, 512MB RAM; if there's > anything else useful I might be able to provide, just ask. It would be interesting to see where the int3 comes from. Too bad, lockdep doesn't provide the register dump. The stacktrace also doesn't go further than the int3(), I wonder if this int3 came from userspace? The ltrace readme says "software breakpoints, like gdb", so I guess this is the case. Yep, seems like it. This looks relevant: | commit fb1dac909d94ff807cd833d340c6827c3a957159 | Author: Peter Zijlstra | Date: Wed Jan 16 09:51:59 2008 +0100 | | lockdep: more hardirq annotations for notify_die() I'm attaching a similarly-looking patch for this case (DO_VM86_ERROR), though I suspect it might be missing for the other cases (DO_ERROR/DO_ERROR_INFO) as well. Reported-by: Alessandro Suardi Signed-off-by: Vegard Nossum Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63..08d752d 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -544,6 +544,7 @@ vm86_trap: #define DO_ERROR(trapnr, signr, str, name) \ void do_##name(struct pt_regs *regs, long error_code) \ { \ + trace_hardirqs_fixup(); \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ return; \ -- cgit v0.10.2 From f8a45704f5bd5f037c8e4a75172cab1476fc0447 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Thu, 29 May 2008 21:14:35 -0300 Subject: x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: Kevin Winchester Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 998a06e..156e6d7 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - unsigned long t_start, t_size; + u64 t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016lx - %016lx pattern %d", + printk(KERN_CONT "\n %016llx - %016llx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 3692fd0aaef489b063518b5999c702bada5b6e22 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 12 Jun 2008 07:07:22 +0100 Subject: [ARM] 5091/1: Add missing bitfield include to regs-lcd.h Macros like Fld() or FShft used in regs-lcd.h are defined in bitfield.h, but the latter is not included. Also fix one whitespace issue while being there. Signed-off-by: Antonio Ospite Signed-off-by: Stefan Schmidt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h index f762493..3ba464c9 100644 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ b/include/asm-arm/arch-pxa/regs-lcd.h @@ -1,5 +1,8 @@ #ifndef __ASM_ARCH_REGS_LCD_H #define __ASM_ARCH_REGS_LCD_H + +#include + /* * LCD Controller Registers and Bits Definitions */ @@ -69,7 +72,7 @@ #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ #define LCCR0_LCDT (1 << 22) /* LCD panel type */ #define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -- cgit v0.10.2 From 5dd34572ad9a3be430632dd42e4af2ea370b397b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Jun 2008 14:22:24 -0700 Subject: Linux 2.6.26-rc6 .. and a new name, courtesy of Alan. diff --git a/Makefile b/Makefile index 2b95120..6923d66 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc5 -NAME = Funky Weasel is Jiggy wit it +EXTRAVERSION = -rc6 +NAME = Rotary Wombat # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v0.10.2 From 24e3fcefb9cc61acce59ed54c00c4e4c32537de7 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 12 Jun 2008 14:30:28 -0700 Subject: bnx2x: Updating the Maintainer I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 46fa179..7c8e561 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -995,8 +995,8 @@ L: netdev@vger.kernel.org S: Supported BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER -P: Eliezer Tamir -M: eliezert@broadcom.com +P: Eilon Greenstein +M: eilong@broadcom.com L: netdev@vger.kernel.org S: Supported diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7bdb5af..70cba64 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov @@ -74,7 +75,7 @@ static char version[] __devinitdata = "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -MODULE_AUTHOR("Eliezer Tamir "); +MODULE_AUTHOR("Eliezer Tamir"); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f0c0d3..8e68d06 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver */ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index dcaecc5..370686e 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir */ #ifndef BNX2X_INIT_H -- cgit v0.10.2 From f23d60de719e639690b2dc5c2d0e4243ff614b7a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 14:47:58 -0700 Subject: ipv6: Fix duplicate initialization of rawv6_prot.destroy In changeset 22dd485022f3d0b162ceb5e67d85de7c3806aa20 ("raw: Raw socket leak.") code was added so that we flush pending frames on raw sockets to avoid leaks. The ipv4 part was fine, but the ipv6 part was not done correctly. Unlike the ipv4 side, the ipv6 code already has a .destroy method for rawv6_prot. So now there were two assignments to this member, and what the compiler does is use the last one, effectively making the ipv6 parts of that changeset a NOP. Fix this by removing the: .destroy = inet6_destroy_sock, line, and adding an inet6_destroy_sock() call to the end of raw6_destroy(). Noticed by Al Viro. Signed-off-by: David S. Miller Acked-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 8fee9a1..3aee123 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1169,7 +1169,8 @@ static int raw6_destroy(struct sock *sk) lock_sock(sk); ip6_flush_pending_frames(sk); release_sock(sk); - return 0; + + return inet6_destroy_sock(sk); } static int rawv6_init_sk(struct sock *sk) @@ -1200,7 +1201,6 @@ struct proto rawv6_prot = { .disconnect = udp_disconnect, .ioctl = rawv6_ioctl, .init = rawv6_init_sk, - .destroy = inet6_destroy_sock, .setsockopt = rawv6_setsockopt, .getsockopt = rawv6_getsockopt, .sendmsg = rawv6_sendmsg, -- cgit v0.10.2 From ec0a196626bd12e0ba108d7daa6d95a4fb25c2c5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 16:31:35 -0700 Subject: tcp: Revert 'process defer accept as established' changes. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts two changesets, ec3c0982a2dd1e671bad8e9d26c28dcba0039d87 ("[TCP]: TCP_DEFER_ACCEPT updates - process as established") and the follow-on bug fix 9ae27e0adbf471c7a6b80102e38e1d5a346b3b38 ("tcp: Fix slab corruption with ipv6 and tcp6fuzz"). This change causes several problems, first reported by Ingo Molnar as a distcc-over-loopback regression where connections were getting stuck. Ilpo Järvinen first spotted the locking problems. The new function added by this code, tcp_defer_accept_check(), only has the child socket locked, yet it is modifying state of the parent listening socket. Fixing that is non-trivial at best, because we can't simply just grab the parent listening socket lock at this point, because it would create an ABBA deadlock. The normal ordering is parent listening socket --> child socket, but this code path would require the reverse lock ordering. Next is a problem noticed by Vitaliy Gusev, he noted: ---------------------------------------- >--- a/net/ipv4/tcp_timer.c >+++ b/net/ipv4/tcp_timer.c >@@ -481,6 +481,11 @@ static void tcp_keepalive_timer (unsigned long data) > goto death; > } > >+ if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { >+ tcp_send_active_reset(sk, GFP_ATOMIC); >+ goto death; Here socket sk is not attached to listening socket's request queue. tcp_done() will not call inet_csk_destroy_sock() (and tcp_v4_destroy_sock() which should release this sk) as socket is not DEAD. Therefore socket sk will be lost for freeing. ---------------------------------------- Finally, Alexey Kuznetsov argues that there might not even be any real value or advantage to these new semantics even if we fix all of the bugs: ---------------------------------------- Hiding from accept() sockets with only out-of-order data only is the only thing which is impossible with old approach. Is this really so valuable? My opinion: no, this is nothing but a new loophole to consume memory without control. ---------------------------------------- So revert this thing for now. Signed-off-by: David S. Miller diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 18e62e3..b31b6b7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -239,11 +239,6 @@ static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req) return (struct tcp_request_sock *)req; } -struct tcp_deferred_accept_info { - struct sock *listen_sk; - struct request_sock *request; -}; - struct tcp_sock { /* inet_connection_sock has to be the first member of tcp_sock */ struct inet_connection_sock inet_conn; @@ -379,8 +374,6 @@ struct tcp_sock { unsigned int keepalive_intvl; /* time interval between keep alive probes */ int linger2; - struct tcp_deferred_accept_info defer_tcp_accept; - unsigned long last_synq_overflow; u32 tso_deferred; diff --git a/include/net/request_sock.h b/include/net/request_sock.h index b220b5f..0c96e7b 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -115,8 +115,8 @@ struct request_sock_queue { struct request_sock *rskq_accept_head; struct request_sock *rskq_accept_tail; rwlock_t syn_wait_lock; - u16 rskq_defer_accept; - /* 2 bytes hole, try to pack */ + u8 rskq_defer_accept; + /* 3 bytes hole, try to pack */ struct listen_sock *listen_opt; }; diff --git a/include/net/tcp.h b/include/net/tcp.h index d448310..cf54034 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -139,7 +139,6 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo); #define MAX_TCP_KEEPINTVL 32767 #define MAX_TCP_KEEPCNT 127 #define MAX_TCP_SYNCNT 127 -#define MAX_TCP_ACCEPT_DEFERRED 65535 #define TCP_SYNQ_INTERVAL (HZ/5) /* Period of SYNACK timer */ diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 828ea21..045e799 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -419,7 +419,8 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, struct inet_connection_sock *icsk = inet_csk(parent); struct request_sock_queue *queue = &icsk->icsk_accept_queue; struct listen_sock *lopt = queue->listen_opt; - int thresh = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries; + int max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries; + int thresh = max_retries; unsigned long now = jiffies; struct request_sock **reqp, *req; int i, budget; @@ -455,6 +456,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, } } + if (queue->rskq_defer_accept) + max_retries = queue->rskq_defer_accept; + budget = 2 * (lopt->nr_table_entries / (timeout / interval)); i = lopt->clock_hand; @@ -462,8 +466,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, reqp=&lopt->syn_table[i]; while ((req = *reqp) != NULL) { if (time_after_eq(now, req->expires)) { - if (req->retrans < thresh && - !req->rsk_ops->rtx_syn_ack(parent, req)) { + if ((req->retrans < (inet_rsk(req)->acked ? max_retries : thresh)) && + (inet_rsk(req)->acked || + !req->rsk_ops->rtx_syn_ack(parent, req))) { unsigned long timeo; if (req->retrans++ == 0) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index ab66683..fc54a48 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2112,12 +2112,15 @@ static int do_tcp_setsockopt(struct sock *sk, int level, break; case TCP_DEFER_ACCEPT: - if (val < 0) { - err = -EINVAL; - } else { - if (val > MAX_TCP_ACCEPT_DEFERRED) - val = MAX_TCP_ACCEPT_DEFERRED; - icsk->icsk_accept_queue.rskq_defer_accept = val; + icsk->icsk_accept_queue.rskq_defer_accept = 0; + if (val > 0) { + /* Translate value in seconds to number of + * retransmits */ + while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && + val > ((TCP_TIMEOUT_INIT / HZ) << + icsk->icsk_accept_queue.rskq_defer_accept)) + icsk->icsk_accept_queue.rskq_defer_accept++; + icsk->icsk_accept_queue.rskq_defer_accept++; } break; @@ -2299,7 +2302,8 @@ static int do_tcp_getsockopt(struct sock *sk, int level, val = (val ? : sysctl_tcp_fin_timeout) / HZ; break; case TCP_DEFER_ACCEPT: - val = icsk->icsk_accept_queue.rskq_defer_accept; + val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 : + ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1)); break; case TCP_WINDOW_CLAMP: val = tp->window_clamp; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index eba873e9..cad73b7 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4541,49 +4541,6 @@ static void tcp_urg(struct sock *sk, struct sk_buff *skb, struct tcphdr *th) } } -static int tcp_defer_accept_check(struct sock *sk) -{ - struct tcp_sock *tp = tcp_sk(sk); - - if (tp->defer_tcp_accept.request) { - int queued_data = tp->rcv_nxt - tp->copied_seq; - int hasfin = !skb_queue_empty(&sk->sk_receive_queue) ? - tcp_hdr((struct sk_buff *) - sk->sk_receive_queue.prev)->fin : 0; - - if (queued_data && hasfin) - queued_data--; - - if (queued_data && - tp->defer_tcp_accept.listen_sk->sk_state == TCP_LISTEN) { - if (sock_flag(sk, SOCK_KEEPOPEN)) { - inet_csk_reset_keepalive_timer(sk, - keepalive_time_when(tp)); - } else { - inet_csk_delete_keepalive_timer(sk); - } - - inet_csk_reqsk_queue_add( - tp->defer_tcp_accept.listen_sk, - tp->defer_tcp_accept.request, - sk); - - tp->defer_tcp_accept.listen_sk->sk_data_ready( - tp->defer_tcp_accept.listen_sk, 0); - - sock_put(tp->defer_tcp_accept.listen_sk); - sock_put(sk); - tp->defer_tcp_accept.listen_sk = NULL; - tp->defer_tcp_accept.request = NULL; - } else if (hasfin || - tp->defer_tcp_accept.listen_sk->sk_state != TCP_LISTEN) { - tcp_reset(sk); - return -1; - } - } - return 0; -} - static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen) { struct tcp_sock *tp = tcp_sk(sk); @@ -4944,8 +4901,6 @@ step5: tcp_data_snd_check(sk); tcp_ack_snd_check(sk); - - tcp_defer_accept_check(sk); return 0; csum_error: diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 4f8485c..97a2300 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1918,14 +1918,6 @@ int tcp_v4_destroy_sock(struct sock *sk) sk->sk_sndmsg_page = NULL; } - if (tp->defer_tcp_accept.request) { - reqsk_free(tp->defer_tcp_accept.request); - sock_put(tp->defer_tcp_accept.listen_sk); - sock_put(sk); - tp->defer_tcp_accept.listen_sk = NULL; - tp->defer_tcp_accept.request = NULL; - } - atomic_dec(&tcp_sockets_allocated); return 0; diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 019c8c1..8245247 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -571,8 +571,10 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, does sequence test, SYN is truncated, and thus we consider it a bare ACK. - Both ends (listening sockets) accept the new incoming - connection and try to talk to each other. 8-) + If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this + bare ACK. Otherwise, we create an established connection. Both + ends (listening sockets) accept the new incoming connection and try + to talk to each other. 8-) Note: This case is both harmless, and rare. Possibility is about the same as us discovering intelligent life on another plant tomorrow. @@ -640,6 +642,13 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, if (!(flg & TCP_FLAG_ACK)) return NULL; + /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */ + if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && + TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) { + inet_rsk(req)->acked = 1; + return NULL; + } + /* OK, ACK is valid, create big socket and * feed this segment to it. It will repeat all * the tests. THIS SEGMENT MUST MOVE SOCKET TO @@ -678,24 +687,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, inet_csk_reqsk_queue_unlink(sk, req, prev); inet_csk_reqsk_queue_removed(sk, req); - if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && - TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) { - - /* the accept queue handling is done is est recv slow - * path so lets make sure to start there - */ - tcp_sk(child)->pred_flags = 0; - sock_hold(sk); - sock_hold(child); - tcp_sk(child)->defer_tcp_accept.listen_sk = sk; - tcp_sk(child)->defer_tcp_accept.request = req; - - inet_csk_reset_keepalive_timer(child, - inet_csk(sk)->icsk_accept_queue.rskq_defer_accept * HZ); - } else { - inet_csk_reqsk_queue_add(sk, req, child); - } - + inet_csk_reqsk_queue_add(sk, req, child); return child; listen_overflow: diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 4de68cf..63ed9d6 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -489,11 +489,6 @@ static void tcp_keepalive_timer (unsigned long data) goto death; } - if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { - tcp_send_active_reset(sk, GFP_ATOMIC); - goto death; - } - if (!sock_flag(sk, SOCK_KEEPOPEN) || sk->sk_state == TCP_CLOSE) goto out; -- cgit v0.10.2 From df0bcab2c66ac876d5e80864fca5cce944a44540 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 12 Jun 2008 15:21:26 -0700 Subject: agp: add support for Radeon Mobility 9000 chipset Addresses https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/178634 Signed-off-by: Amit Kucheria Signed-off-by: maximilian attems Acked-by: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 55c97f6..07b4d8f 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -458,6 +458,10 @@ static struct agp_device_ids ati_agp_device_ids[] __devinitdata = .chipset_name = "IGP9100/M", }, { + .device_id = PCI_DEVICE_ID_ATI_RS350_133, + .chipset_name = "IGP9000/M", + }, + { .device_id = PCI_DEVICE_ID_ATI_RS350_200, .chipset_name = "IGP9100/M", }, -- cgit v0.10.2 From c700be3d1320d2be4f04c8a5330186b7df724438 Mon Sep 17 00:00:00 2001 From: "kosaki.motohiro@jp.fujitsu.com" Date: Thu, 12 Jun 2008 15:21:27 -0700 Subject: mm: fix incorrect variable type in do_try_to_free_pages() "Smarter retry of costly-order allocations" patch series change behaver of do_try_to_free_pages(). But unfortunately ret variable type was unchanged. Thus an overflow is possible. Signed-off-by: KOSAKI Motohiro Acked-by: Nishanth Aravamudan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 9a29901..967d30c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1307,7 +1307,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, struct scan_control *sc) { int priority; - int ret = 0; + unsigned long ret = 0; unsigned long total_scanned = 0; unsigned long nr_reclaimed = 0; struct reclaim_state *reclaim_state = current->reclaim_state; -- cgit v0.10.2 From 2d518f84e5ecd1d71df0e6ac5176d212f68c27ce Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 12 Jun 2008 15:21:28 -0700 Subject: fat: relax the permission check of fat_setattr() New chmod() allows only acceptable permission, and if not acceptable, it returns -EPERM. Old one allows even if it can't store permission to on disk inode. But it seems too strict for users. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one, rsync couldn't create the temporary file. So, this patch allows like old one, but now it doesn't change the permission if it can't store, and it returns 0. Also, this patch fixes missing check. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/fat/file.c b/fs/fat/file.c index 27cc116..771326b 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -257,26 +257,34 @@ int fat_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) } EXPORT_SYMBOL_GPL(fat_getattr); -static int fat_check_mode(const struct msdos_sb_info *sbi, struct inode *inode, - mode_t mode) +static int fat_sanitize_mode(const struct msdos_sb_info *sbi, + struct inode *inode, umode_t *mode_ptr) { - mode_t mask, req = mode & ~S_IFMT; + mode_t mask, perm; - if (S_ISREG(mode)) + /* + * Note, the basic check is already done by a caller of + * (attr->ia_mode & ~MSDOS_VALID_MODE) + */ + + if (S_ISREG(inode->i_mode)) mask = sbi->options.fs_fmask; else mask = sbi->options.fs_dmask; + perm = *mode_ptr & ~(S_IFMT | mask); + /* * Of the r and x bits, all (subject to umask) must be present. Of the * w bits, either all (subject to umask) or none must be present. */ - req &= ~mask; - if ((req & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO))) + if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO))) return -EPERM; - if ((req & S_IWUGO) && ((req & S_IWUGO) != (S_IWUGO & ~mask))) + if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask))) return -EPERM; + *mode_ptr &= S_IFMT | perm; + return 0; } @@ -299,7 +307,7 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) { struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb); struct inode *inode = dentry->d_inode; - int mask, error = 0; + int error = 0; unsigned int ia_valid; lock_kernel(); @@ -332,12 +340,13 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) error = 0; goto out; } + if (((attr->ia_valid & ATTR_UID) && (attr->ia_uid != sbi->options.fs_uid)) || ((attr->ia_valid & ATTR_GID) && (attr->ia_gid != sbi->options.fs_gid)) || ((attr->ia_valid & ATTR_MODE) && - fat_check_mode(sbi, inode, attr->ia_mode) < 0)) + (attr->ia_mode & ~MSDOS_VALID_MODE))) error = -EPERM; if (error) { @@ -346,15 +355,16 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) goto out; } - error = inode_setattr(inode, attr); - if (error) - goto out; + /* + * We don't return -EPERM here. Yes, strange, but this is too + * old behavior. + */ + if (attr->ia_valid & ATTR_MODE) { + if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0) + attr->ia_valid &= ~ATTR_MODE; + } - if (S_ISDIR(inode->i_mode)) - mask = sbi->options.fs_dmask; - else - mask = sbi->options.fs_fmask; - inode->i_mode &= S_IFMT | (S_IRWXUGO & ~mask); + error = inode_setattr(inode, attr); out: unlock_kernel(); return error; -- cgit v0.10.2 From 69c5ddf58a03da3686691ad2f293bc79fd977c10 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 12 Jun 2008 15:21:29 -0700 Subject: m68k: Add ext2_find_{first,next}_bit() for ext4 Add ext2_find_{first,next}_bit(), which are needed for ext4. They're derived out of the ext2_find_next_zero_bit found in the same file. Compile tested with crosstools [Reworked to preserve all symmetry with ext2_find_{first,next}_zero_bit()] This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10393 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h index 83d1f28..3e81064 100644 --- a/include/asm-m68k/bitops.h +++ b/include/asm-m68k/bitops.h @@ -410,8 +410,49 @@ static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, res = ext2_find_first_zero_bit (p, size - 32 * (p - addr)); return (p - addr) * 32 + res; } -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) + +static inline int ext2_find_first_bit(const void *vaddr, unsigned size) +{ + const unsigned long *p = vaddr, *addr = vaddr; + int res; + + if (!size) + return 0; + + size = (size >> 5) + ((size & 31) > 0); + while (*p++ == 0UL) { + if (--size == 0) + return (p - addr) << 5; + } + + --p; + for (res = 0; res < 32; res++) + if (ext2_test_bit(res, p)) + break; + return (p - addr) * 32 + res; +} + +static inline int ext2_find_next_bit(const void *vaddr, unsigned size, + unsigned offset) +{ + const unsigned long *addr = vaddr; + const unsigned long *p = addr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + /* Look for one in first longword */ + for (res = bit; res < 32; res++) + if (ext2_test_bit(res, p)) + return (p - addr) * 32 + res; + p++; + } + /* No set bit yet, search remaining full bytes for a set bit */ + res = ext2_find_first_bit(p, size - 32 * (p - addr)); + return (p - addr) * 32 + res; +} #endif /* __KERNEL__ */ -- cgit v0.10.2 From 630c270183133ac25bef8c8d726ac448df9b169a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 12 Jun 2008 15:21:29 -0700 Subject: hgafb: resource management fix Release ports which are requested during detection which are not freed if there is no hga card. Otherwise there is a crash during cat /proc/ioports command. Signed-off-by: Krzysztof Helt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index fb9e672..c18880d 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -279,7 +279,7 @@ static void hga_blank(int blank_mode) static int __init hga_card_detect(void) { - int count=0; + int count = 0; void __iomem *p, *q; unsigned short p_save, q_save; @@ -303,20 +303,18 @@ static int __init hga_card_detect(void) writew(0x55aa, p); if (readw(p) == 0x55aa) count++; writew(p_save, p); - if (count != 2) { - return 0; - } + if (count != 2) + goto error; /* Ok, there is definitely a card registering at the correct * memory location, so now we do an I/O port test. */ - if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */ - return 0; - } - if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */ - return 0; - } + if (!test_hga_b(0x66, 0x0f)) /* cursor low register */ + goto error; + + if (!test_hga_b(0x99, 0x0f)) /* cursor low register */ + goto error; /* See if the card is a Hercules, by checking whether the vsync * bit of the status register is changing. This test lasts for @@ -331,7 +329,7 @@ static int __init hga_card_detect(void) } if (p_save == q_save) - return 0; + goto error; switch (inb_p(HGA_STATUS_PORT) & 0x70) { case 0x10: @@ -348,6 +346,12 @@ static int __init hga_card_detect(void) break; } return 1; +error: + if (release_io_ports) + release_region(0x3b0, 12); + if (release_io_port) + release_region(0x3bf, 1); + return 0; } /** -- cgit v0.10.2 From 551e172a20cf960f7caab4d31b252dc59538bfa4 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 12 Jun 2008 15:21:31 -0700 Subject: cpusets: provide another web page URL in MAINTAINERS file Add URL for another CPUSETS web page to the MAINTAINERS file. This URL provides links to major LGPL user level C libraries supporting cpuset usage and user level cpu and node masks. Signed-off-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..9187bb0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1202,6 +1202,7 @@ M: pj@sgi.com M: menage@google.com L: linux-kernel@vger.kernel.org W: http://www.bullopensource.org/cpuset/ +W: http://oss.sgi.com/projects/cpusets/ S: Supported CRAMFS FILESYSTEM -- cgit v0.10.2 From 57d3c64fd8130ebdacd85a36c9656ba5e221f3a3 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 12 Jun 2008 15:21:31 -0700 Subject: proc_fs.h: move struct mm_struct forward-declaration Move the forward-declaration of struct mm_struct a little way up proc_fs.h. This fixes a bunch of "'struct mm_struct' declared inside parameter list" warnings with CONFIG_PROC_FS=n Signed-off-by: Ben Nizette Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 9883bc9..fff1d27 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -9,6 +9,8 @@ struct net; struct completion; +struct mm_struct; + /* * The proc filesystem constants/structures */ @@ -101,8 +103,6 @@ extern spinlock_t proc_subdir_lock; extern void proc_root_init(void); extern void proc_misc_init(void); -struct mm_struct; - void proc_flush_task(struct task_struct *task); struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *); int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir); -- cgit v0.10.2 From 8cdbc2b9826b3543fecff2f6d6400fa77b21ffdd Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Thu, 12 Jun 2008 15:21:33 -0700 Subject: capabilities: add (back) dummy support for KEEPCAPS The dummy module is used by folk that run security conscious code(!?). A feature of such code (for example, dhclient) is that it tries to operate with minimum privilege (dropping unneeded capabilities). While the dummy module doesn't restrict code execution based on capability state, the user code expects the kernel to appear to support it. This patch adds back faked support for the PR_SET_KEEPCAPS etc., calls - making the kernel behave as before 2.6.26. For details see: http://bugzilla.kernel.org/show_bug.cgi?id=10748 Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Cc: James Morris Cc: Stephen Smalley Cc: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/dummy.c b/security/dummy.c index f50c6c3..b891688 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include static int dummy_ptrace (struct task_struct *parent, struct task_struct *child) { @@ -607,7 +609,27 @@ static int dummy_task_kill (struct task_struct *p, struct siginfo *info, static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5, long *rc_p) { - return 0; + switch (option) { + case PR_CAPBSET_READ: + *rc_p = (cap_valid(arg2) ? 1 : -EINVAL); + break; + case PR_GET_KEEPCAPS: + *rc_p = issecure(SECURE_KEEP_CAPS); + break; + case PR_SET_KEEPCAPS: + if (arg2 > 1) + *rc_p = -EINVAL; + else if (arg2) + current->securebits |= issecure_mask(SECURE_KEEP_CAPS); + else + current->securebits &= + ~issecure_mask(SECURE_KEEP_CAPS); + break; + default: + return 0; + } + + return 1; } static void dummy_task_reparent_to_init (struct task_struct *p) -- cgit v0.10.2 From 24aac480e76c6f5d1391ac05c5e9c0eb9b0cd302 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 12 Jun 2008 15:21:34 -0700 Subject: cciss: add new hardware support Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index e65736c..63e59b8 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -21,6 +21,11 @@ This driver is known to work with the following cards: * SA E200 * SA E200i * SA E500 + * SA P212 + * SA P410 + * SA P410i + * SA P411 + * SA P812 Detecting drive failures: ------------------------- diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e336b05..5f1e1cc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -53,15 +53,16 @@ #include #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.14)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14) +#define DRIVER_NAME "HP CISS Driver (v 3.6.20)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); -MODULE_VERSION("3.6.14"); + " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" + " Smart Array G2 Series SAS/SATA Controllers"); +MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); #include "cciss_cmd.h" @@ -90,6 +91,11 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -123,6 +129,11 @@ static struct board_type products[] = { {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, {0x323D103C, "Smart Array P700m", &SA5_access, 512}, + {0x3241103C, "Smart Array P212", &SA5_access, 384}, + {0x3243103C, "Smart Array P410", &SA5_access, 384}, + {0x3245103C, "Smart Array P410i", &SA5_access, 384}, + {0x3247103C, "Smart Array P411", &SA5_access, 384}, + {0x3249103C, "Smart Array P812", &SA5_access, 384}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9b940e6..eafc9d6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -716,6 +716,7 @@ #define PCI_DEVICE_ID_HP_CISSA 0x3220 #define PCI_DEVICE_ID_HP_CISSC 0x3230 #define PCI_DEVICE_ID_HP_CISSD 0x3238 +#define PCI_DEVICE_ID_HP_CISSE 0x323a #define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 #define PCI_VENDOR_ID_PCTECH 0x1042 -- cgit v0.10.2 From 67dddaad5d8b8c5ee5b96a7e2f6cb0faad703865 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 12 Jun 2008 15:21:35 -0700 Subject: kprobes: fix error checking of batch registration Fix error checking routine to catch an error which occurs in first __register_*probe(). Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Jim Keniston Cc: David Miller Cc: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 1e0250c..d4998f8 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -699,8 +699,9 @@ static int __register_kprobes(struct kprobe **kps, int num, return -EINVAL; for (i = 0; i < num; i++) { ret = __register_kprobe(kps[i], called_from); - if (ret < 0 && i > 0) { - unregister_kprobes(kps, i); + if (ret < 0) { + if (i > 0) + unregister_kprobes(kps, i); break; } } @@ -776,8 +777,9 @@ static int __register_jprobes(struct jprobe **jps, int num, jp->kp.break_handler = longjmp_break_handler; ret = __register_kprobe(&jp->kp, called_from); } - if (ret < 0 && i > 0) { - unregister_jprobes(jps, i); + if (ret < 0) { + if (i > 0) + unregister_jprobes(jps, i); break; } } @@ -920,8 +922,9 @@ static int __register_kretprobes(struct kretprobe **rps, int num, return -EINVAL; for (i = 0; i < num; i++) { ret = __register_kretprobe(rps[i], called_from); - if (ret < 0 && i > 0) { - unregister_kretprobes(rps, i); + if (ret < 0) { + if (i > 0) + unregister_kretprobes(rps, i); break; } } -- cgit v0.10.2 From 6c38d8578545482fe45d6e6ea37be02a2e1bb289 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:36 -0700 Subject: m68knommu: init coldfire timer TRR with n - 1, not n The coldfire timer must be initialised to n - 1 if we want it to count n cycles between each tick interrupt. This was already fixed, but has been lost with the conversion to GENERIC_TIMER. Signed-off-by: Philippe De Muyter Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index ba5a9f3..454f254 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -111,7 +111,13 @@ void hw_timer_init(void) __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); mcftmr_cycles_per_jiffy = FREQ / HZ; - __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR)); + /* + * The coldfire timer runs from 0 to TRR included, then 0 + * again and so on. It counts thus actually TRR + 1 steps + * for 1 tick, not TRR. So if you want n cycles, + * initialize TRR with n - 1. + */ + __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); -- cgit v0.10.2 From 529a4f4ec90ffd9394fdfc22bea7a858ae343171 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 12 Jun 2008 15:21:38 -0700 Subject: rtc-at32ap700x: fix bug in at32_rtc_readalarm() alarm->pending indicates whether there's an alarm that has actually been triggered, not whether we're waiting for it. alarm->enabled indicates that. Also add missing locking around reading the RTC registers. Signed-off-by: Haavard Skinnemoen Signed-off-by: Alessandro Zummo Cc: Hans-Christian Egtvedt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 42244f1..2ef8cdf 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -94,8 +94,11 @@ static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); + spin_lock_irq(&rtc->lock); rtc_time_to_tm(rtc->alarm_time, &alrm->time); - alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0; + spin_unlock_irq(&rtc->lock); return 0; } @@ -119,7 +122,7 @@ static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_lock_irq(&rtc->lock); rtc->alarm_time = alarm_unix_time; rtc_writel(rtc, TOP, rtc->alarm_time); - if (alrm->pending) + if (alrm->enabled) rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) | RTC_BIT(CTRL_TOPEN)); else -- cgit v0.10.2 From 14c8a77e1bbd693446dad297d2ae2dd22f187e4f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 12 Jun 2008 15:21:40 -0700 Subject: uml: remove include of asm/user.h I allowed an include of asm/user.h to sneak back in. This patch replaces it with sys/user.h. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index b487cbe..229f7a5 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -6,7 +6,7 @@ #include #include -#include +#include #include "kern_constants.h" #include "longjmp.h" #include "user.h" @@ -76,7 +76,7 @@ int put_fp_registers(int pid, unsigned long *regs) void arch_init_registers(int pid) { - struct user_fxsr_struct fpx_regs; + struct user_fpxregs_struct fpx_regs; int err; err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs); -- cgit v0.10.2 From f1ef9167ca4494a8c6d71d0031c73e9c8841eadd Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 12 Jun 2008 15:21:41 -0700 Subject: uml: work around broken host PTRACE_SYSEMU Fedora broke PTRACE_SYSEMU again, and UML crashes as a result when it doesn't need to. This patch makes the PTRACE_SYSEMU check fail gracefully and makes UML fall back to PTRACE_SYSCALL. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b4b36e0..183db26 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -121,8 +121,10 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit) { int status, n, ret = 0; - if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) - fatal_perror("stop_ptraced_child : ptrace failed"); + if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) { + perror("stop_ptraced_child : ptrace failed"); + return -1; + } CATCH_EINTR(n = waitpid(pid, &status, 0)); if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -212,7 +214,7 @@ static void __init check_sysemu(void) if (n < 0) fatal_perror("check_sysemu : wait failed"); if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP)) - fatal("check_sysemu : expected SIGTRAP, got status = %d", + fatal("check_sysemu : expected SIGTRAP, got status = %d\n", status); if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) @@ -254,9 +256,11 @@ static void __init check_sysemu(void) if (WIFSTOPPED(status) && (WSTOPSIG(status) == (SIGTRAP|0x80))) { - if (!count) - fatal("check_ptrace : SYSEMU_SINGLESTEP " - "doesn't singlestep"); + if (!count) { + non_fatal("check_ptrace : SYSEMU_SINGLESTEP " + "doesn't singlestep"); + goto fail; + } n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); if (n < 0) @@ -266,9 +270,12 @@ static void __init check_sysemu(void) } else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP)) count++; - else - fatal("check_ptrace : expected SIGTRAP or " - "(SIGTRAP | 0x80), got status = %d", status); + else { + non_fatal("check_ptrace : expected SIGTRAP or " + "(SIGTRAP | 0x80), got status = %d\n", + status); + goto fail; + } } if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; -- cgit v0.10.2 From 30ec261e5f97986644c0982543bc1cee1b2782bf Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 12 Jun 2008 15:21:41 -0700 Subject: MAINTAINERS: update maintainership of pxa2xx/pxa3xx Signed-off-by: Eric Miao Acked-by: Russell King Acked-by: Nicolas Pitre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 9187bb0..88aac5f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3330,9 +3330,11 @@ L: video4linux-list@redhat.com W: http://www.isely.net/pvrusb2/ S: Maintained -PXA2xx SUPPORT -P: Nicolas Pitre -M: nico@cam.org +PXA2xx/PXA3xx SUPPORT +P: Eric Miao +M: eric.miao@marvell.com +P: Russell King +M: linux@arm.linux.org.uk L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained -- cgit v0.10.2 From cef33400d0349fb24b6f8b7dea79b66e3144fd8b Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Thu, 12 Jun 2008 15:21:42 -0700 Subject: mmc: wbsd: initialize tasklets before requesting interrupt With CONFIG_DEBUG_SHIRQ set we will get an interrupt as soon as we allocate one. Tasklets may be scheduled in the interrupt handler but they will be initialized after the handler returns, causing a BUG() in kernel/softirq.c when they run. Should fix this Fedora bug report: https://bugzilla.redhat.com/show_bug.cgi?id=449817 Signed-off-by: Chuck Ebbert Acked-by: Pierre Ossman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index be624a0..c303e7f 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1457,17 +1457,7 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) int ret; /* - * Allocate interrupt. - */ - - ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); - if (ret) - return ret; - - host->irq = irq; - - /* - * Set up tasklets. + * Set up tasklets. Must be done before requesting interrupt. */ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); @@ -1480,6 +1470,15 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + /* + * Allocate interrupt. + */ + ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); + if (ret) + return ret; + + host->irq = irq; + return 0; } -- cgit v0.10.2 From 093a44e71aa29157fb1611b00507d67c954099d6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jun 2008 15:21:43 -0700 Subject: drivers/isdn/sc/ioctl.c: add missing kfree spid has been allocated in this function and so should be freed before leaving it, as in the other error handling cases. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c index 7817d22..1081091 100644 --- a/drivers/isdn/sc/ioctl.c +++ b/drivers/isdn/sc/ioctl.c @@ -226,6 +226,7 @@ int sc_ioctl(int card, scs_ioctl *data) */ if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) { kfree(rcvmsg); + kfree(spid); return -EFAULT; } -- cgit v0.10.2 From c97aee9ba43d60ff20d955065d29b6d3d8c950d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: intel_rng: make device not found a warning Since many distros load this driver by default (throw it against the wall and see what sticks method). Change the error message severity level to avoid alarming users. Isn't it annoying when users actually read the error logs... Signed-off-by: Stephen Hemminger Cc: Michael Buesch Acked-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5cc651e..27fdc08 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -273,7 +273,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw) if (mfc != INTEL_FWH_MANUFACTURER_CODE || (dvc != INTEL_FWH_DEVICE_CODE_8M && dvc != INTEL_FWH_DEVICE_CODE_4M)) { - printk(KERN_ERR PFX "FWH not detected\n"); + printk(KERN_NOTICE PFX "FWH not detected\n"); return -ENODEV; } -- cgit v0.10.2 From e59b6a5ab51f6192cbe20d4f031335fe6d0e73fd Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: drivers/video/cirrusfb: fix RAM address printk In the cirrusfb driver, the RAM address printk has a superfluous 'x' that could be interpreted as "don't care", while it is actually a typo. Fix that. [akpm@linux-foundation.org: join the two printk strings to make it atomic] Signed-off-by: Philippe De Muyter Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 35ac9d9..c14b243 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2432,9 +2432,9 @@ static int cirrusfb_pci_register(struct pci_dev *pdev, info->screen_size = board_size; cinfo->unmap = cirrusfb_pci_unmap; - printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ", - info->screen_size >> 10, board_addr); - printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n"); + printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus " + "Logic chipset on PCI bus\n", + info->screen_size >> 10, board_addr); pci_set_drvdata(pdev, info); ret = cirrusfb_register(info); -- cgit v0.10.2 From cfc53f65f56f9f33c0cf522124045ac5a64076b3 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:46 -0700 Subject: driver/char/generic_nvram: fix banner The generic nvram driver announces itself as 'Macintosh non-volatile memory driver' instead of 'Generic non-volatile memory driver'. Fix that. Signed-off-by: Philippe De Muyter Cc: Benjamin Herrenschmidt Cc: Arjan van de Ven Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c index 2398e86..a00869c 100644 --- a/drivers/char/generic_nvram.c +++ b/drivers/char/generic_nvram.c @@ -133,7 +133,7 @@ static struct miscdevice nvram_dev = { int __init nvram_init(void) { - printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n", + printk(KERN_INFO "Generic non-volatile memory driver v%s\n", NVRAM_VERSION); return misc_register(&nvram_dev); } -- cgit v0.10.2 From 2165009bdf63f79716a36ad545df14c3cdf958b7 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 12 Jun 2008 15:21:47 -0700 Subject: pagemap: pass mm into pagewalkers We need this at least for huge page detection for now, because powerpc needs the vm_area_struct to be able to determine whether a virtual address is referring to a huge page (its pmd_huge() doesn't work). It might also come in handy for some of the other users. Signed-off-by: Dave Hansen Acked-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 1740362..f0df310 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -315,9 +315,9 @@ struct mem_size_stats { }; static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - void *private) + struct mm_walk *walk) { - struct mem_size_stats *mss = private; + struct mem_size_stats *mss = walk->private; struct vm_area_struct *vma = mss->vma; pte_t *pte, ptent; spinlock_t *ptl; @@ -365,19 +365,21 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, return 0; } -static struct mm_walk smaps_walk = { .pmd_entry = smaps_pte_range }; - static int show_smap(struct seq_file *m, void *v) { struct vm_area_struct *vma = v; struct mem_size_stats mss; int ret; + struct mm_walk smaps_walk = { + .pmd_entry = smaps_pte_range, + .mm = vma->vm_mm, + .private = &mss, + }; memset(&mss, 0, sizeof mss); mss.vma = vma; if (vma->vm_mm && !is_vm_hugetlb_page(vma)) - walk_page_range(vma->vm_mm, vma->vm_start, vma->vm_end, - &smaps_walk, &mss); + walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk); ret = show_map(m, v); if (ret) @@ -426,9 +428,9 @@ const struct file_operations proc_smaps_operations = { }; static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, - unsigned long end, void *private) + unsigned long end, struct mm_walk *walk) { - struct vm_area_struct *vma = private; + struct vm_area_struct *vma = walk->private; pte_t *pte, ptent; spinlock_t *ptl; struct page *page; @@ -452,8 +454,6 @@ static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, return 0; } -static struct mm_walk clear_refs_walk = { .pmd_entry = clear_refs_pte_range }; - static ssize_t clear_refs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -476,11 +476,17 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, return -ESRCH; mm = get_task_mm(task); if (mm) { + static struct mm_walk clear_refs_walk; + memset(&clear_refs_walk, 0, sizeof(clear_refs_walk)); + clear_refs_walk.pmd_entry = clear_refs_pte_range; + clear_refs_walk.mm = mm; down_read(&mm->mmap_sem); - for (vma = mm->mmap; vma; vma = vma->vm_next) + for (vma = mm->mmap; vma; vma = vma->vm_next) { + clear_refs_walk.private = vma; if (!is_vm_hugetlb_page(vma)) - walk_page_range(mm, vma->vm_start, vma->vm_end, - &clear_refs_walk, vma); + walk_page_range(vma->vm_start, vma->vm_end, + &clear_refs_walk); + } flush_tlb_mm(mm); up_read(&mm->mmap_sem); mmput(mm); @@ -528,9 +534,9 @@ static int add_to_pagemap(unsigned long addr, u64 pfn, } static int pagemap_pte_hole(unsigned long start, unsigned long end, - void *private) + struct mm_walk *walk) { - struct pagemapread *pm = private; + struct pagemapread *pm = walk->private; unsigned long addr; int err = 0; for (addr = start; addr < end; addr += PAGE_SIZE) { @@ -548,9 +554,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte) } static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - void *private) + struct mm_walk *walk) { - struct pagemapread *pm = private; + struct pagemapread *pm = walk->private; pte_t *pte; int err = 0; @@ -675,8 +681,8 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, * user buffer is tracked in "pm", and the walk * will stop when we hit the end of the buffer. */ - ret = walk_page_range(mm, start_vaddr, end_vaddr, - &pagemap_walk, &pm); + ret = walk_page_range(start_vaddr, end_vaddr, + &pagemap_walk); if (ret == PM_END_OF_BUFFER) ret = 0; /* don't need mmap_sem for these, but this looks cleaner */ diff --git a/include/linux/mm.h b/include/linux/mm.h index c31a9cd..586a943 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -760,16 +760,17 @@ unsigned long unmap_vmas(struct mmu_gather **tlb, * (see walk_page_range for more details) */ struct mm_walk { - int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, void *); - int (*pud_entry)(pud_t *, unsigned long, unsigned long, void *); - int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, void *); - int (*pte_entry)(pte_t *, unsigned long, unsigned long, void *); - int (*pte_hole)(unsigned long, unsigned long, void *); + int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *); + struct mm_struct *mm; + void *private; }; -int walk_page_range(const struct mm_struct *, unsigned long addr, - unsigned long end, const struct mm_walk *walk, - void *private); +int walk_page_range(unsigned long addr, unsigned long end, + struct mm_walk *walk); void free_pgd_range(struct mmu_gather **tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma, diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 0afd238..d5878be 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -3,14 +3,14 @@ #include static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pte_t *pte; int err = 0; pte = pte_offset_map(pmd, addr); for (;;) { - err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, private); + err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk); if (err) break; addr += PAGE_SIZE; @@ -24,7 +24,7 @@ static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, } static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pmd_t *pmd; unsigned long next; @@ -35,15 +35,15 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pmd_entry) - err = walk->pmd_entry(pmd, addr, next, private); + err = walk->pmd_entry(pmd, addr, next, walk); if (!err && walk->pte_entry) - err = walk_pte_range(pmd, addr, next, walk, private); + err = walk_pte_range(pmd, addr, next, walk); if (err) break; } while (pmd++, addr = next, addr != end); @@ -52,7 +52,7 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, } static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pud_t *pud; unsigned long next; @@ -63,15 +63,15 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, next = pud_addr_end(addr, end); if (pud_none_or_clear_bad(pud)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pud_entry) - err = walk->pud_entry(pud, addr, next, private); + err = walk->pud_entry(pud, addr, next, walk); if (!err && (walk->pmd_entry || walk->pte_entry)) - err = walk_pmd_range(pud, addr, next, walk, private); + err = walk_pmd_range(pud, addr, next, walk); if (err) break; } while (pud++, addr = next, addr != end); @@ -85,15 +85,15 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, * @addr: starting address * @end: ending address * @walk: set of callbacks to invoke for each level of the tree - * @private: private data passed to the callback function * * Recursively walk the page table for the memory area in a VMA, * calling supplied callbacks. Callbacks are called in-order (first * PGD, first PUD, first PMD, first PTE, second PTE... second PMD, * etc.). If lower-level callbacks are omitted, walking depth is reduced. * - * Each callback receives an entry pointer, the start and end of the - * associated range, and a caller-supplied private data pointer. + * Each callback receives an entry pointer and the start and end of the + * associated range, and a copy of the original mm_walk for access to + * the ->private or ->mm fields. * * No locks are taken, but the bottom level iterator will map PTE * directories from highmem if necessary. @@ -101,9 +101,8 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, * If any callback returns a non-zero value, the walk is aborted and * the return value is propagated back to the caller. Otherwise 0 is returned. */ -int walk_page_range(const struct mm_struct *mm, - unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) +int walk_page_range(unsigned long addr, unsigned long end, + struct mm_walk *walk) { pgd_t *pgd; unsigned long next; @@ -112,21 +111,24 @@ int walk_page_range(const struct mm_struct *mm, if (addr >= end) return err; - pgd = pgd_offset(mm, addr); + if (!walk->mm) + return -EINVAL; + + pgd = pgd_offset(walk->mm, addr); do { next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pgd_entry) - err = walk->pgd_entry(pgd, addr, next, private); + err = walk->pgd_entry(pgd, addr, next, walk); if (!err && (walk->pud_entry || walk->pmd_entry || walk->pte_entry)) - err = walk_pud_range(pgd, addr, next, walk, private); + err = walk_pud_range(pgd, addr, next, walk); if (err) break; } while (pgd++, addr = next, addr != end); -- cgit v0.10.2 From bcf8039ed45f56013c4afea5520bca7d909e5e61 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 12 Jun 2008 15:21:48 -0700 Subject: pagemap: fix large pages in pagemap We were walking right into huge page areas in the pagemap walker, and calling the pmds pmd_bad() and clearing them. That leaked huge pages. Bad. This patch at least works around that for now. It ignores huge pages in the pagemap walker for the time being, and won't leak those pages. Signed-off-by: Dave Hansen Acked-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index f0df310..ab8ccc9 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -553,24 +553,45 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte) return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT); } +static unsigned long pte_to_pagemap_entry(pte_t pte) +{ + unsigned long pme = 0; + if (is_swap_pte(pte)) + pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte)) + | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP; + else if (pte_present(pte)) + pme = PM_PFRAME(pte_pfn(pte)) + | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT; + return pme; +} + static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, struct mm_walk *walk) { + struct vm_area_struct *vma; struct pagemapread *pm = walk->private; pte_t *pte; int err = 0; + /* find the first VMA at or above 'addr' */ + vma = find_vma(walk->mm, addr); for (; addr != end; addr += PAGE_SIZE) { u64 pfn = PM_NOT_PRESENT; - pte = pte_offset_map(pmd, addr); - if (is_swap_pte(*pte)) - pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte)) - | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP; - else if (pte_present(*pte)) - pfn = PM_PFRAME(pte_pfn(*pte)) - | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT; - /* unmap so we're not in atomic when we copy to userspace */ - pte_unmap(pte); + + /* check to see if we've left 'vma' behind + * and need a new, higher one */ + if (vma && (addr >= vma->vm_end)) + vma = find_vma(walk->mm, addr); + + /* check that 'vma' actually covers this address, + * and that it isn't a huge page vma */ + if (vma && (vma->vm_start <= addr) && + !is_vm_hugetlb_page(vma)) { + pte = pte_offset_map(pmd, addr); + pfn = pte_to_pagemap_entry(*pte); + /* unmap before userspace copy */ + pte_unmap(pte); + } err = add_to_pagemap(addr, pfn, pm); if (err) return err; -- cgit v0.10.2 From 6c826818ff55eae7702b778b5f8bdf765af3b2af Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Thu, 12 Jun 2008 15:21:49 -0700 Subject: /proc/sysvipc/shm: fix 32-bit truncation of segment sizes sysvipc_shm_proc_show() picks between format strings (based on the expected maximum length of a SHM segment) in a way that prevents gcc from performing format checks on the seq_printf() parameters. This hid two format errors - shp->shm_segsz and shp->shm_nattach are both unsigned long, but were being printed as unsigned int and signed int respectively. This leads to 32-bit truncation of SHM segment sizes reported in /proc/sysvipc/shm. (And for nattach, but that's less of a problem for most users). This patch makes the format string directly visible to gcc's format specifier checker, and fixes the two broken format specifiers. Signed-off-by: Paul Menage Cc: Nadia Derbey Cc: Manfred Spraul Cc: Pierre Peiffer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/shm.c b/ipc/shm.c index d05f6b5..790240c 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -1058,16 +1058,16 @@ asmlinkage long sys_shmdt(char __user *shmaddr) static int sysvipc_shm_proc_show(struct seq_file *s, void *it) { struct shmid_kernel *shp = it; - char *format; -#define SMALL_STRING "%10d %10d %4o %10u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n" -#define BIG_STRING "%10d %10d %4o %21u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n" +#if BITS_PER_LONG <= 32 +#define SIZE_SPEC "%10lu" +#else +#define SIZE_SPEC "%21lu" +#endif - if (sizeof(size_t) <= sizeof(int)) - format = SMALL_STRING; - else - format = BIG_STRING; - return seq_printf(s, format, + return seq_printf(s, + "%10d %10d %4o " SIZE_SPEC " %5u %5u " + "%5lu %5u %5u %5u %5u %10lu %10lu %10lu\n", shp->shm_perm.key, shp->shm_perm.id, shp->shm_perm.mode, -- cgit v0.10.2 From d2187ebd84c7dd13ef269e9600f4daebeb02816e Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Thu, 12 Jun 2008 15:21:51 -0700 Subject: console keyboard mapping broken by 04c71976 Several console keyboard maps are broken since commit 04c71976500352d02f60616d2b960267d8c5fe24 Author: Samuel Thibault Date: Tue Oct 16 23:27:04 2007 -0700 unicode diacritics support because that changeset made k_self consider the value as a latin1 character when in Unicode mode, which is wrong; k_self should still take the console map into account. Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 7f7e798..d9a0a53 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -677,12 +677,7 @@ static void k_deadunicode(struct vc_data *vc, unsigned int value, char up_flag) static void k_self(struct vc_data *vc, unsigned char value, char up_flag) { - unsigned int uni; - if (kbd->kbdmode == VC_UNICODE) - uni = value; - else - uni = conv_8bit_to_uni(value); - k_unicode(vc, uni, up_flag); + k_unicode(vc, conv_8bit_to_uni(value), up_flag); } static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) -- cgit v0.10.2 From 643b52b9c0b4e959436b4b551ebf4060d06d5ae8 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 12 Jun 2008 15:21:52 -0700 Subject: radix-tree: fix small lockless radix-tree bug We shrink a radix tree when its root node has only one child, in the left most slot. The child becomes the new root node. To perform this operation in a manner compatible with concurrent lockless lookups, we atomically switch the root pointer from the parent to its child. However a concurrent lockless lookup may now have loaded a pointer to the parent (and is presently deciding what to do next). For this reason, we also have to keep the parent node in a valid state after shrinking the tree, until the next RCU grace period -- otherwise this lookup with the parent pointer may not do the right thing. Notably, we need to keep the child in the left most slot there in case that is requested by the lookup. This is all pretty standard RCU stuff. It is worth repeating because in my eagerness to obey the radix tree node constructor scheme, I had broken it by zeroing the radix tree node before the grace period. What could happen is that a lookup can load the parent pointer, then decide it wants to follow the left most child slot, only to find the slot contained NULL due to the concurrent shrinker having zeroed the parent node before waiting for a grace period. The lookup would return a false negative as a result. Fix it by doing that clearing in the RCU callback. I would normally want to rip out the constructor entirely, but radix tree nodes are one of those places where they make sense (only few cachelines will be touched soon after allocation). This was never actually found in any lockless pagecache testing or by the test harness, but by seeing the odd problem with my scalable vmap rewrite. I have not tickled the test harness into reproducing it yet, but I'll keep working at it. Fortunately, it is not a problem anywhere lockless pagecache is used in mainline kernels (pagecache probe is not a guarantee, and brd does not have concurrent lookups and deletes). Signed-off-by: Nick Piggin Acked-by: Peter Zijlstra Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/radix-tree.c b/lib/radix-tree.c index bd52171..169a2f8 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -88,6 +88,57 @@ static inline gfp_t root_gfp_mask(struct radix_tree_root *root) return root->gfp_mask & __GFP_BITS_MASK; } +static inline void tag_set(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + __set_bit(offset, node->tags[tag]); +} + +static inline void tag_clear(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + __clear_bit(offset, node->tags[tag]); +} + +static inline int tag_get(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + return test_bit(offset, node->tags[tag]); +} + +static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag) +{ + root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT)); +} + +static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag) +{ + root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT)); +} + +static inline void root_tag_clear_all(struct radix_tree_root *root) +{ + root->gfp_mask &= __GFP_BITS_MASK; +} + +static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag) +{ + return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT)); +} + +/* + * Returns 1 if any slot in the node has this tag set. + * Otherwise returns 0. + */ +static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag) +{ + int idx; + for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) { + if (node->tags[tag][idx]) + return 1; + } + return 0; +} /* * This assumes that the caller has performed appropriate preallocation, and * that the caller has pinned this thread of control to the current CPU. @@ -124,6 +175,17 @@ static void radix_tree_node_rcu_free(struct rcu_head *head) { struct radix_tree_node *node = container_of(head, struct radix_tree_node, rcu_head); + + /* + * must only free zeroed nodes into the slab. radix_tree_shrink + * can leave us with a non-NULL entry in the first slot, so clear + * that here to make sure. + */ + tag_clear(node, 0, 0); + tag_clear(node, 1, 0); + node->slots[0] = NULL; + node->count = 0; + kmem_cache_free(radix_tree_node_cachep, node); } @@ -165,59 +227,6 @@ out: } EXPORT_SYMBOL(radix_tree_preload); -static inline void tag_set(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - __set_bit(offset, node->tags[tag]); -} - -static inline void tag_clear(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - __clear_bit(offset, node->tags[tag]); -} - -static inline int tag_get(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - return test_bit(offset, node->tags[tag]); -} - -static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag) -{ - root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT)); -} - - -static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag) -{ - root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT)); -} - -static inline void root_tag_clear_all(struct radix_tree_root *root) -{ - root->gfp_mask &= __GFP_BITS_MASK; -} - -static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag) -{ - return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT)); -} - -/* - * Returns 1 if any slot in the node has this tag set. - * Otherwise returns 0. - */ -static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag) -{ - int idx; - for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) { - if (node->tags[tag][idx]) - return 1; - } - return 0; -} - /* * Return the maximum key which can be store into a * radix tree with height HEIGHT. @@ -930,11 +939,6 @@ static inline void radix_tree_shrink(struct radix_tree_root *root) newptr = radix_tree_ptr_to_indirect(newptr); root->rnode = newptr; root->height--; - /* must only free zeroed nodes into the slab */ - tag_clear(to_free, 0, 0); - tag_clear(to_free, 1, 0); - to_free->slots[0] = NULL; - to_free->count = 0; radix_tree_node_free(to_free); } } -- cgit v0.10.2 From 1da2e3d679a8ea2d9e82040359a706da0bd3bef6 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Thu, 12 Jun 2008 15:21:54 -0700 Subject: provide rtc_cmos platform device Recently (around 2.6.25) I've noticed that RTC no longer works for me. It turned out this is because I use pnpacpi=off kernel option to work around the parport_pc bugs. I always did so, but RTC used to work fine in the past, and now it have regressed. The patch fixes the problem by creating the platform device for the RTC when PNP is disabled. This may also help running the PNP-enabled kernel on an older PCs. Signed-off-by: Stas Sergeev Cc: David Brownell Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Bjorn Helgaas Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 9615eee..05191bb 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -4,6 +4,8 @@ #include #include #include +#include +#include #include #include @@ -197,3 +199,35 @@ unsigned long long native_read_tsc(void) } EXPORT_SYMBOL(native_read_tsc); + +static struct resource rtc_resources[] = { + [0] = { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, + [1] = { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static __init int add_rtc_cmos(void) +{ +#ifdef CONFIG_PNP + if (!pnp_platform_devices) + platform_device_register(&rtc_device); +#else + platform_device_register(&rtc_device); +#endif /* CONFIG_PNP */ + return 0; +} +device_initcall(add_rtc_cmos); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d060a06..d7bb9ba 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -905,19 +905,7 @@ static struct pnp_driver cmos_pnp_driver = { .resume = cmos_pnp_resume, }; -static int __init cmos_init(void) -{ - return pnp_register_driver(&cmos_pnp_driver); -} -module_init(cmos_init); - -static void __exit cmos_exit(void) -{ - pnp_unregister_driver(&cmos_pnp_driver); -} -module_exit(cmos_exit); - -#else /* no PNP */ +#endif /* CONFIG_PNP */ /*----------------------------------------------------------------*/ @@ -958,20 +946,33 @@ static struct platform_driver cmos_platform_driver = { static int __init cmos_init(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + return pnp_register_driver(&cmos_pnp_driver); + else + return platform_driver_probe(&cmos_platform_driver, + cmos_platform_probe); +#else return platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); +#endif /* CONFIG_PNP */ } module_init(cmos_init); static void __exit cmos_exit(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + pnp_unregister_driver(&cmos_pnp_driver); + else + platform_driver_unregister(&cmos_platform_driver); +#else platform_driver_unregister(&cmos_platform_driver); +#endif /* CONFIG_PNP */ } module_exit(cmos_exit); -#endif /* !PNP */ - MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From e6d2bb2bacb43ff03b0f458108d71981d58e775a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: make HPET_RTC_IRQ track HPET_EMULATE_RTC More Kconfig tweaks related to the legacy PC RTC code: - Describe the legacy PC RTC driver as such ... it's never quite been clear that this driver is for PC RTCs, and now it's fair to call this the "legacy" driver. - Force it to understand about HPET stealing its IRQs ... kernel code does this always when HPET is in use, there should be no option for users to goof up the config. This seems to fix kernel bugzilla #10729. Signed-off-by: David Brownell Cc: Maxim Levitsky Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index d307bf2..2d854bb 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -749,7 +749,7 @@ config NVRAM if RTC_LIB=n config RTC - tristate "Enhanced Real Time Clock Support" + tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ && !ARM && !SUPERH && !S390 && !AVR32 ---help--- @@ -1036,9 +1036,9 @@ config HPET non-periodic and/or periodic. config HPET_RTC_IRQ - bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC - default n - depends on HPET + bool + default HPET_EMULATE_RTC + depends on RTC && HPET help If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It is assumed the platform called hpet_alloc with the RTC IRQ values for -- cgit v0.10.2 From c6d8f400cc7610f04177f81168c19b8407cb48c3 Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: Ramtron FM3130 RTC support Ramtron FM3130 is a chip with two separate devices inside, RTC clock and FRAM. This driver provides only RTC functionality. This chip is met in lots of custom boards with AT91SAMXXXX CPU I work with, is cheap and in no way better or worse than any other RTC on market. While it is mostly met on much smaller devices, I think it is great to have it supported in Linux. Signed-off-by: Sergey Lapin Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 60f8afc..4949dc4 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -256,6 +256,17 @@ config RTC_DRV_S35390A This driver can also be built as a module. If so the module will be called rtc-s35390a. +config RTC_DRV_FM3130 + tristate "Ramtron FM3130" + help + If you say Y here you will get support for the + Ramtron FM3130 RTC chips. + Ramtron FM3130 is a chip with two separate devices inside, + RTC clock and FRAM. This driver provides only RTC functionality. + + This driver can also be built as a module. If so the module + will be called rtc-fm3130. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ebe871c..b6e14d5 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o +obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o @@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o @@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o -obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 0000000..11644c8 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin "); +MODULE_LICENSE("GPL"); + -- cgit v0.10.2 From e297d99e103f951a71fcb1534f1ff3480dd3a851 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 10 Jun 2008 00:13:04 +0900 Subject: ahci: workarounds for mcp65 MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1 can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ and apply appropriate workarounds. Signed-off-by: Tejun Heo Cc: Peer Chen Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 544b7d6..1c62b8e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -89,6 +89,7 @@ enum { board_ahci_sb600 = 3, board_ahci_mv = 4, board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -190,6 +191,7 @@ enum { AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ /* ap->flags bits */ @@ -384,6 +386,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -438,14 +448,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ /* NVIDIA */ - { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ @@ -624,6 +634,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); @@ -2118,7 +2134,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host) static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info pi = ahci_port_info[ent->driver_data]; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -2167,6 +2184,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; hpriv->flags |= (unsigned long)pi.private_data; + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); -- cgit v0.10.2 From bd17243a84632465f5403bc9eb8b4831bd67e582 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 10 Jun 2008 15:52:04 +0800 Subject: ahci: Workaround HW bug for SB600/700 SATA controller PMP support There is one bug in ATI SATA PMP of SB600 and SB700 old revision, which leads to soft reset failure. This patch can fix the bug. Signed-off-by: Shane Huang Acked-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1c62b8e..966ab40 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -255,6 +255,8 @@ static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, @@ -331,6 +333,12 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { @@ -361,11 +369,11 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mv */ { @@ -379,12 +387,11 @@ static const struct ata_port_info ahci_port_info[] = { }, /* board_ahci_sb700 */ { - AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_PMP), + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mcp65 */ { @@ -1278,19 +1285,11 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; - int pmp = sata_srst_pmp(link); const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1328,7 +1327,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, ahci_check_ready); + rc = ata_wait_after_reset(link, deadline, check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { reason = "device not ready"; @@ -1344,6 +1343,72 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, return rc; } +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { -- cgit v0.10.2 From dfcf753bd3fb09f336659d07b1c48db7e62772e0 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 22 May 2008 14:36:31 -0400 Subject: Revert "parisc: fix trivial section name warnings" This reverts commit bd3bb8c15b9a80dbddfb7905b237a4a11a4725b4. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S index f0b18ce..38a1c1b 100644 --- a/arch/parisc/hpux/gate.S +++ b/arch/parisc/hpux/gate.S @@ -13,10 +13,9 @@ #include #include #include -#include .level LEVEL - __HEAD + .text .import hpux_call_table .import hpux_syscall_exit,code diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S index ccd3a50..58c53c8 100644 --- a/arch/parisc/hpux/wrappers.S +++ b/arch/parisc/hpux/wrappers.S @@ -28,10 +28,9 @@ #include #include #include -#include .level LEVEL - __HEAD + .text /* These should probably go in a header file somewhere. * They are duplicated in kernel/wrappers.S diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 5d08374..d1fa4ed 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -38,7 +38,6 @@ #include #include -#include #ifdef CONFIG_64BIT .level 2.0w @@ -622,7 +621,7 @@ * the static part of the kernel address space. */ - __HEAD + .text .align PAGE_SIZE diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 5680a2c..ec2482dc 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -32,7 +32,7 @@ ENTRY(boot_args) .word 0 /* arg3 */ END(boot_args) - __HEAD + .section .text.head .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S index 068322e..2cbf13b 100644 --- a/arch/parisc/kernel/hpmc.S +++ b/arch/parisc/kernel/hpmc.S @@ -47,7 +47,6 @@ #include #include -#include /* * stack for os_hpmc, the HPMC handler. @@ -77,7 +76,7 @@ ENTRY(hpmc_pim_data) .block HPMC_PIM_DATA_SIZE END(hpmc_pim_data) - __HEAD + .text .import intr_save, code ENTRY(os_hpmc) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index e3246a5..09b77b2 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -37,9 +37,8 @@ #include #include #include -#include - __HEAD + .text .align 128 ENTRY(flush_tlb_all_local) diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S index d411dfb..fa6ea99 100644 --- a/arch/parisc/kernel/perf_asm.S +++ b/arch/parisc/kernel/perf_asm.S @@ -43,7 +43,7 @@ ; The coprocessor only needs to be enabled when ; starting/stopping the coprocessor with the pmenb/pmdis. ; - __HEAD + .text ENTRY(perf_intrigue_enable_perf_counters) .proc diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 47fbdae..7a92695 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -12,7 +12,6 @@ #include #include -#include .section .bss .export real_stack @@ -40,7 +39,7 @@ save_cr_end: /************************ 32-bit real-mode calls ***********************/ /* This can be called in both narrow and wide kernels */ - __HEAD + .text /* unsigned long real32_call_asm(unsigned int *sp, * unsigned int *arg0p, @@ -114,7 +113,7 @@ ENDPROC(real32_call_asm) # define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where) # define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r - __HEAD + .text save_control_regs: load32 PA(save_cr_space), %r28 PUSH_CR(%cr24, %r28) @@ -146,7 +145,7 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - __HEAD + .text .align 128 rfi_virt2real: /* switch to real mode... */ @@ -181,7 +180,7 @@ rfi_v2r_1: bv 0(%r2) nop - __HEAD + .text .align 128 rfi_real2virt: rsm PSW_SM_I,%r0 @@ -219,7 +218,7 @@ rfi_r2v_1: /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ - __HEAD + .text /* unsigned long real64_call_asm(unsigned long *sp, * unsigned long *arg0p, * unsigned long fn) @@ -277,7 +276,7 @@ ENDPROC(real64_call_asm) #endif - __HEAD + .text /* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html ** GCC 3.3 and later has a new function in libgcc.a for ** comparing function pointers. diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index ae509d8..69b6eeb 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -17,7 +17,6 @@ #include #include -#include /* We fill the empty parts of the gateway page with * something that will kill the kernel or a @@ -27,7 +26,7 @@ .level LEVEL - __HEAD + .text .import syscall_exit,code .import syscall_exit_rfi,code @@ -637,7 +636,7 @@ END(sys_call_table64) All light-weight-syscall atomic operations will use this set of locks */ - .section .data, "aw" + .section .data .align PAGE_SIZE ENTRY(lws_lock_start) /* lws locks */ diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 4821ad6..d172d42 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -23,7 +23,6 @@ #include #include #include -#include #ifdef CONFIG_SMP .macro get_fault_ip t1 t2 @@ -56,7 +55,7 @@ .level LEVEL - __HEAD + .text .section .fixup, "ax" /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */ diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S index b0d8853..1bd23cc 100644 --- a/arch/parisc/lib/lusercopy.S +++ b/arch/parisc/lib/lusercopy.S @@ -33,12 +33,11 @@ */ + .text + #include #include #include -#include - - __HEAD /* * get_sr gets the appropriate space value into -- cgit v0.10.2 From 1138a72cd96857d1d5928c0c8c83d8b8995eeb38 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 22 May 2008 14:38:26 -0400 Subject: parisc: move head.S to head.text section And explicitly list it in vmlinux.lds... Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index ec2482dc..a84e31e 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -32,7 +32,8 @@ ENTRY(boot_args) .word 0 /* arg3 */ END(boot_args) - .section .text.head + __HEAD + .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 50b4a3a..2e516b8 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -50,6 +50,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text ALIGN(16) : { + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From db51d92b90193cf69b2bcc2874fd0b267fd3e710 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 26 May 2008 01:49:01 -0400 Subject: parisc: export copy_user_page_asm Needed by fuse (via copy_highpage). Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c index 5b7fc4a..0eecfbb 100644 --- a/arch/parisc/kernel/parisc_ksyms.c +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -152,3 +152,6 @@ EXPORT_SYMBOL($$dyncall); EXPORT_SYMBOL(node_data); EXPORT_SYMBOL(pfnnid_map); #endif + +/* from pacache.S -- needed for copy_page */ +EXPORT_SYMBOL(copy_user_page_asm); -- cgit v0.10.2 From 22febf1f372496d74534be32b6b5edcee7fb7cc5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 26 May 2008 01:54:35 -0400 Subject: parisc: export empty_zero_page Needed by ext4 when built as a module. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 78fe252..ce0da68 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -547,6 +547,7 @@ void __init mem_init(void) } unsigned long *empty_zero_page __read_mostly; +EXPORT_SYMBOL(empty_zero_page); void show_mem(void) { -- cgit v0.10.2 From f4441b62d46e7033e907dfd6a8bb0b75b5519e88 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 27 May 2008 01:56:29 -0400 Subject: parisc: fix off by one in setup_sigcontext32 Thankfully, the values were irrelevant... Spotted by newer gcc. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c index db94aff..fb59852 100644 --- a/arch/parisc/kernel/signal32.c +++ b/arch/parisc/kernel/signal32.c @@ -289,7 +289,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __ &sc->sc_iaoq[0], compat_reg); /* Store upper half */ - compat_reg = (compat_uint_t)(regs->gr[32] >> 32); + compat_reg = (compat_uint_t)(regs->gr[31] >> 32); err |= __put_user(compat_reg, &rf->rf_iaoq[0]); DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); @@ -299,7 +299,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __ DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", &sc->sc_iaoq[1], compat_reg); /* Store upper half */ - compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32); + compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32); err |= __put_user(compat_reg, &rf->rf_iaoq[1]); DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); -- cgit v0.10.2 From e374d17cd74ec5967f81e2b0c67ec3219a2bbbcc Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 31 May 2008 12:15:42 -0400 Subject: parisc: fix miscompilation of ip_fast_csum with gcc >= 4.3 ip_fast_csum needs an asm "memory" clobber, otherwise the aggressive optimizations in gcc-4.3 cause it to be miscompiled. Signed-off-by: Kyle McMartin diff --git a/include/asm-parisc/checksum.h b/include/asm-parisc/checksum.h index cc3ec1b..e9639cc 100644 --- a/include/asm-parisc/checksum.h +++ b/include/asm-parisc/checksum.h @@ -65,7 +65,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) "2:\n" : "=r" (sum), "=r" (iph), "=r" (ihl) : "1" (iph), "2" (ihl) - : "r19", "r20", "r21" ); + : "r19", "r20", "r21", "memory"); return (__force __sum16)sum; } -- cgit v0.10.2 From 42a5a8a60a093c359987fd884aec99b9d7f4c084 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 6 Jun 2008 17:16:17 -0400 Subject: parisc: update my email address Signed-off-by: Kyle McMartin diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..01605a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -274,7 +274,7 @@ S: Maintained AD1889 ALSA SOUND DRIVER P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca P: Thibaut Varene M: T-Bone@parisc-linux.org W: http://wiki.parisc-linux.org/AD1889 @@ -1827,7 +1827,7 @@ S: Maintained HARMONY SOUND DRIVER P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca L: linux-parisc@vger.kernel.org S: Maintained @@ -3120,7 +3120,7 @@ S: Maintained PARISC ARCHITECTURE P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca P: Matthew Wilcox M: matthew@wil.cx P: Grant Grundler @@ -4023,7 +4023,7 @@ TULIP NETWORK DRIVERS P: Grant Grundler M: grundler@parisc-linux.org P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca L: netdev@vger.kernel.org S: Maintained -- cgit v0.10.2