From 1351c5d3b189a487fbacd5cdf2dc3e6faf12c682 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 23:09:56 +0200 Subject: mac80211: assign AP_VLAN hw queues correctly A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 68f51c3..00e2238 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -474,6 +474,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) master->control_port_protocol; sdata->control_port_no_encrypt = master->control_port_no_encrypt; + sdata->vif.cab_queue = master->vif.cab_queue; + memcpy(sdata->vif.hw_queue, master->vif.hw_queue, + sizeof(sdata->vif.hw_queue)); break; } case NL80211_IFTYPE_AP: -- cgit v0.10.2 From c8aa22db0112f640ac6631347f850879c621840b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 May 2013 01:06:09 +0200 Subject: mac80211: close AP_VLAN interfaces before unregistering all Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 00e2238..ceef644 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1703,6 +1703,15 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) ASSERT_RTNL(); + /* + * Close all AP_VLAN interfaces first, as otherwise they + * might be closed while the AP interface they belong to + * is closed, causing unregister_netdevice_many() to crash. + */ + list_for_each_entry(sdata, &local->interfaces, list) + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + dev_close(sdata->dev); + mutex_lock(&local->iflist_mtx); list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); -- cgit v0.10.2 From ac20976dcaeea3e77e40e9aac8f3799d2a22ea2b Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 27 May 2013 10:43:09 +0200 Subject: mac80211: Allow single vif mac address change with addr_mask When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa Signed-off-by: Jakub Kicinski Reported-by: Alessandro Lannocca Cc: Alessandro Lannocca Cc: Bruno Randolf Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ceef644..98d20c0 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -159,9 +159,10 @@ static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) return 0; } -static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) +static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr) { - struct ieee80211_sub_if_data *sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *iter; u64 new, mask, tmp; u8 *m; int ret = 0; @@ -181,11 +182,14 @@ static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + list_for_each_entry(iter, &local->interfaces, list) { + if (iter == sdata) continue; - m = sdata->vif.addr; + if (iter->vif.type == NL80211_IFTYPE_MONITOR) + continue; + + m = iter->vif.addr; tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); @@ -209,7 +213,7 @@ static int ieee80211_change_mac(struct net_device *dev, void *addr) if (ieee80211_sdata_running(sdata)) return -EBUSY; - ret = ieee80211_verify_mac(sdata->local, sa->sa_data); + ret = ieee80211_verify_mac(sdata, sa->sa_data); if (ret) return ret; @@ -1486,7 +1490,17 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, break; } + /* + * Pick address of existing interface in case user changed + * MAC address manually, default to perm_addr. + */ m = local->hw.wiphy->perm_addr; + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + continue; + m = sdata->vif.addr; + break; + } start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); -- cgit v0.10.2 From 35d865afbbdf79e492f7d61df92b1a9e1d93d26f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 May 2013 10:54:03 +0200 Subject: mac80211: work around broken APs not including HT info There are some APs, notably 2G/3G/4G Wifi routers, specifically the "Onda PN51T", "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile branded device [1] that erroneously don't include all the needed information in (re)association response frames. Work around this by assuming the information is the same as it was in the beacon or probe response and using the data from there instead. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58881. [1] https://bbs.archlinux.org/viewtopic.php?pid=1277305 Note that this requires marking the first ieee802_11_parse_elems() argument const, otherwise we'd get a compiler warning. Cc: stable@vger.kernel.org Reported-and-tested-by: Michal Zajac Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 44be28c..9ca8e32 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1497,10 +1497,11 @@ static inline void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, ieee80211_tx_skb_tid(sdata, skb, 7); } -u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, bool action, +u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc); -static inline void ieee802_11_parse_elems(u8 *start, size_t len, bool action, +static inline void ieee802_11_parse_elems(const u8 *start, size_t len, + bool action, struct ieee802_11_elems *elems) { ieee802_11_parse_elems_crc(start, len, action, elems, 0, 0); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a8c2130..741448b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2522,8 +2522,11 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, u16 capab_info, aid; struct ieee802_11_elems elems; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; + const struct cfg80211_bss_ies *bss_ies = NULL; + struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; u32 changed = 0; int err; + bool ret; /* AssocResp and ReassocResp have identical structure */ @@ -2555,21 +2558,86 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ifmgd->aid = aid; /* + * Some APs are erroneously not including some information in their + * (re)association response frames. Try to recover by using the data + * from the beacon or probe response. This seems to afflict mobile + * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", + * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. + */ + if ((assoc_data->wmm && !elems.wmm_param) || + (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && + (!elems.ht_cap_elem || !elems.ht_operation)) || + (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && + (!elems.vht_cap_elem || !elems.vht_operation))) { + const struct cfg80211_bss_ies *ies; + struct ieee802_11_elems bss_elems; + + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + if (ies) + bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, + GFP_ATOMIC); + rcu_read_unlock(); + if (!bss_ies) + return false; + + ieee802_11_parse_elems(bss_ies->data, bss_ies->len, + false, &bss_elems); + if (assoc_data->wmm && + !elems.wmm_param && bss_elems.wmm_param) { + elems.wmm_param = bss_elems.wmm_param; + sdata_info(sdata, + "AP bug: WMM param missing from AssocResp\n"); + } + + /* + * Also check if we requested HT/VHT, otherwise the AP doesn't + * have to include the IEs in the (re)association response. + */ + if (!elems.ht_cap_elem && bss_elems.ht_cap_elem && + !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { + elems.ht_cap_elem = bss_elems.ht_cap_elem; + sdata_info(sdata, + "AP bug: HT capability missing from AssocResp\n"); + } + if (!elems.ht_operation && bss_elems.ht_operation && + !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { + elems.ht_operation = bss_elems.ht_operation; + sdata_info(sdata, + "AP bug: HT operation missing from AssocResp\n"); + } + if (!elems.vht_cap_elem && bss_elems.vht_cap_elem && + !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { + elems.vht_cap_elem = bss_elems.vht_cap_elem; + sdata_info(sdata, + "AP bug: VHT capa missing from AssocResp\n"); + } + if (!elems.vht_operation && bss_elems.vht_operation && + !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { + elems.vht_operation = bss_elems.vht_operation; + sdata_info(sdata, + "AP bug: VHT operation missing from AssocResp\n"); + } + } + + /* * We previously checked these in the beacon/probe response, so * they should be present here. This is just a safety net. */ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { sdata_info(sdata, - "HT AP is missing WMM params or HT capability/operation in AssocResp\n"); - return false; + "HT AP is missing WMM params or HT capability/operation\n"); + ret = false; + goto out; } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && (!elems.vht_cap_elem || !elems.vht_operation)) { sdata_info(sdata, - "VHT AP is missing VHT capability/operation in AssocResp\n"); - return false; + "VHT AP is missing VHT capability/operation\n"); + ret = false; + goto out; } mutex_lock(&sdata->local->sta_mtx); @@ -2580,7 +2648,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, sta = sta_info_get(sdata, cbss->bssid); if (WARN_ON(!sta)) { mutex_unlock(&sdata->local->sta_mtx); - return false; + ret = false; + goto out; } sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; @@ -2633,7 +2702,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, sta->sta.addr); WARN_ON(__sta_info_destroy(sta)); mutex_unlock(&sdata->local->sta_mtx); - return false; + ret = false; + goto out; } mutex_unlock(&sdata->local->sta_mtx); @@ -2673,7 +2743,10 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); ieee80211_sta_reset_beacon_monitor(sdata); - return true; + ret = true; + out: + kfree(bss_ies); + return ret; } static enum rx_mgmt_action __must_check diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 27e0715..72e6292 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -661,12 +661,12 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, } EXPORT_SYMBOL(ieee80211_queue_delayed_work); -u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, bool action, +u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc) { size_t left = len; - u8 *pos = start; + const u8 *pos = start; bool calc_crc = filter != 0; DECLARE_BITMAP(seen_elems, 256); const u8 *ie; -- cgit v0.10.2 From a6b368f6caec2c897a2ac98c5c359cab9c35dea5 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 11 Jun 2013 10:44:39 +0200 Subject: mac80211: abort CAC in stop_ap() When a CAC is running and stop_ap is called (e.g. when hostapd is killed while performing CAC), the CAC must be aborted immediately. Otherwise ieee80211_stop_ap() will try to stop it when it's too late - wdev->channel is already NULL and the abort event can not be generated. Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 1a89c80..4fdb306e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1057,6 +1057,12 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + if (sdata->wdev.cac_started) { + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + drv_stop_ap(sdata->local, sdata); /* free all potentially still buffered bcast frames */ -- cgit v0.10.2 From 795d855d56c6d172f50a974f603ba923ac93ee76 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 11 Jun 2013 10:44:40 +0200 Subject: mac80211: Fix rate control mask matching call The order of parameters was mixed up, introduced in commit "mac80211: improve the rate control API" Cc: Felix Fietkau Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index d3f414f..a02bef3 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -615,7 +615,7 @@ static void rate_control_apply_mask(struct ieee80211_sub_if_data *sdata, if (rates[i].idx < 0) break; - rate_idx_match_mask(&rates[i], sband, mask, chan_width, + rate_idx_match_mask(&rates[i], sband, chan_width, mask, mcs_mask); } } -- cgit v0.10.2 From 3a5a423bb958ad22eeccca66c533e85bf69ba10e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Jun 2013 10:09:57 +0200 Subject: nl80211: fix attrbuf access race by allocating a separate one Since my commit 3713b4e364 ("nl80211: allow splitting wiphy information in dumps"), nl80211_dump_wiphy() uses the global nl80211_fam.attrbuf for parsing the incoming data. This wouldn't be a problem if it only did so on the first dump iteration which is locked against other commands in generic netlink, but due to space constraints in cb->args (the needed state doesn't fit) I decided to always parse the original message. That's racy though since nl80211_fam.attrbuf could be used by some other parsing in generic netlink concurrently. For now, fix this by allocating a separate parse buffer (it's a bit too big for the stack, currently 1448 bytes on 64-bit). For -next, I'll change the code to parse into the global buffer in the first round only and then allocate a smaller buffer to keep the data in cb->args. Reported-by: Linus Torvalds Acked-by: David S. Miller Acked-by: John W. Linville Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d5aed3b..b14b7e3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1564,12 +1564,17 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) struct cfg80211_registered_device *dev; s64 filter_wiphy = -1; bool split = false; - struct nlattr **tb = nl80211_fam.attrbuf; + struct nlattr **tb; int res; + /* will be zeroed in nlmsg_parse() */ + tb = kmalloc(sizeof(*tb) * (NL80211_ATTR_MAX + 1), GFP_KERNEL); + if (!tb) + return -ENOMEM; + mutex_lock(&cfg80211_mutex); res = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, - tb, nl80211_fam.maxattr, nl80211_policy); + tb, NL80211_ATTR_MAX, nl80211_policy); if (res == 0) { split = tb[NL80211_ATTR_SPLIT_WIPHY_DUMP]; if (tb[NL80211_ATTR_WIPHY]) @@ -1583,6 +1588,7 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) netdev = dev_get_by_index(sock_net(skb->sk), ifidx); if (!netdev) { mutex_unlock(&cfg80211_mutex); + kfree(tb); return -ENODEV; } if (netdev->ieee80211_ptr) { @@ -1593,6 +1599,7 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) dev_put(netdev); } } + kfree(tb); list_for_each_entry(dev, &cfg80211_rdev_list, list) { if (!net_eq(wiphy_net(&dev->wiphy), sock_net(skb->sk))) -- cgit v0.10.2