From d323655372590c533c275b1d798f9d1221efb5c6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 20 Apr 2009 14:31:42 +0200 Subject: cfg80211: clean up includes Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg Cc: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index f797495..2522a19 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -40,7 +40,7 @@ #include #include -#include +#include #include #ifdef CONFIG_AR9170_LEDS #include diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h index f585292..ac42586 100644 --- a/drivers/net/wireless/ath/ar9170/usb.h +++ b/drivers/net/wireless/ath/ar9170/usb.h @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include #include #include "eeprom.h" diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 9a7715d..7c59dc4 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -17,7 +17,7 @@ #ifndef EEPROM_H #define EEPROM_H -#include +#include #define AH_USE_EEPROM 0x1 diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 526c7f1..fdf07c8 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -18,7 +18,6 @@ #include #include #include -#include #include "regd.h" #include "regd_common.h" diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index eba7c71..07291cc 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -20,7 +20,6 @@ #include #include -#include #define NO_CTL 0xff #define SD_NO_CTL 0xE0 diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 239e6a1..43e0ba6 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5287a3e..601eac6 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1,70 +1,217 @@ #ifndef __NET_CFG80211_H #define __NET_CFG80211_H +/* + * 802.11 device and configuration interface + * + * Copyright 2006-2009 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include #include #include #include #include #include -#include -#include -#include +#include + /* remove once we remove the wext stuff */ +#include +#include + /* - * 802.11 configuration in-kernel interface + * wireless hardware capability structures + */ + +/** + * enum ieee80211_band - supported frequency bands + * + * The bands are assigned this way because the supported + * bitrates differ in these bands. * - * Copyright 2006, 2007 Johannes Berg + * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band + * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) */ +enum ieee80211_band { + IEEE80211_BAND_2GHZ, + IEEE80211_BAND_5GHZ, + + /* keep last */ + IEEE80211_NUM_BANDS +}; /** - * struct vif_params - describes virtual interface parameters - * @mesh_id: mesh ID to use - * @mesh_id_len: length of the mesh ID + * enum ieee80211_channel_flags - channel flags + * + * Channel flags set by the regulatory control code. + * + * @IEEE80211_CHAN_DISABLED: This channel is disabled. + * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted + * on this channel. + * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel + * is not permitted. */ -struct vif_params { - u8 *mesh_id; - int mesh_id_len; +enum ieee80211_channel_flags { + IEEE80211_CHAN_DISABLED = 1<<0, + IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, + IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, + IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, }; -/* Radiotap header iteration - * implemented in net/wireless/radiotap.c - * docs in Documentation/networking/radiotap-headers.txt +/** + * struct ieee80211_channel - channel definition + * + * This structure describes a single channel for use + * with cfg80211. + * + * @center_freq: center frequency in MHz + * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz + * @hw_value: hardware-specific value for the channel + * @flags: channel flags from &enum ieee80211_channel_flags. + * @orig_flags: channel flags at registration time, used by regulatory + * code to support devices with additional restrictions + * @band: band this channel belongs to. + * @max_antenna_gain: maximum antenna gain in dBi + * @max_power: maximum transmission power (in dBm) + * @beacon_found: helper to regulatory code to indicate when a beacon + * has been found on this channel. Use regulatory_hint_found_beacon() + * to enable this, this is is useful only on 5 GHz band. + * @orig_mag: internal use + * @orig_mpwr: internal use */ +struct ieee80211_channel { + enum ieee80211_band band; + u16 center_freq; + u8 max_bandwidth; + u16 hw_value; + u32 flags; + int max_antenna_gain; + int max_power; + bool beacon_found; + u32 orig_flags; + int orig_mag, orig_mpwr; +}; + /** - * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args - * @rtheader: pointer to the radiotap header we are walking through - * @max_length: length of radiotap header in cpu byte ordering - * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg - * @this_arg: pointer to current radiotap arg - * @arg_index: internal next argument index - * @arg: internal next argument pointer - * @next_bitmap: internal pointer to next present u32 - * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * enum ieee80211_rate_flags - rate flags + * + * Hardware/specification flags for rates. These are structured + * in a way that allows using the same bitrate structure for + * different bands/PHY modes. + * + * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short + * preamble on this bitrate; only relevant in 2.4GHz band and + * with CCK rates. + * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate + * when used with 802.11a (on the 5 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate + * when used with 802.11b (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate + * when used with 802.11g (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. */ +enum ieee80211_rate_flags { + IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, + IEEE80211_RATE_MANDATORY_A = 1<<1, + IEEE80211_RATE_MANDATORY_B = 1<<2, + IEEE80211_RATE_MANDATORY_G = 1<<3, + IEEE80211_RATE_ERP_G = 1<<4, +}; -struct ieee80211_radiotap_iterator { - struct ieee80211_radiotap_header *rtheader; - int max_length; - int this_arg_index; - u8 *this_arg; +/** + * struct ieee80211_rate - bitrate definition + * + * This structure describes a bitrate that an 802.11 PHY can + * operate with. The two values @hw_value and @hw_value_short + * are only for driver use when pointers to this structure are + * passed around. + * + * @flags: rate-specific flags + * @bitrate: bitrate in units of 100 Kbps + * @hw_value: driver/hardware value for this rate + * @hw_value_short: driver/hardware value for this rate when + * short preamble is used + */ +struct ieee80211_rate { + u32 flags; + u16 bitrate; + u16 hw_value, hw_value_short; +}; - int arg_index; - u8 *arg; - __le32 *next_bitmap; - u32 bitmap_shifter; +/** + * struct ieee80211_sta_ht_cap - STA's HT capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11n HT capabilities for an STA. + * + * @ht_supported: is HT supported by the STA + * @cap: HT capabilities map as described in 802.11n spec + * @ampdu_factor: Maximum A-MPDU length factor + * @ampdu_density: Minimum A-MPDU spacing + * @mcs: Supported MCS rates + */ +struct ieee80211_sta_ht_cap { + u16 cap; /* use IEEE80211_HT_CAP_ */ + bool ht_supported; + u8 ampdu_factor; + u8 ampdu_density; + struct ieee80211_mcs_info mcs; }; -extern int ieee80211_radiotap_iterator_init( - struct ieee80211_radiotap_iterator *iterator, - struct ieee80211_radiotap_header *radiotap_header, - int max_length); +/** + * struct ieee80211_supported_band - frequency band definition + * + * This structure describes a frequency band a wiphy + * is able to operate in. + * + * @channels: Array of channels the hardware can operate in + * in this band. + * @band: the band this structure represents + * @n_channels: Number of channels in @channels + * @bitrates: Array of bitrates the hardware can operate with + * in this band. Must be sorted to give a valid "supported + * rates" IE, i.e. CCK rates first, then OFDM. + * @n_bitrates: Number of bitrates in @bitrates + */ +struct ieee80211_supported_band { + struct ieee80211_channel *channels; + struct ieee80211_rate *bitrates; + enum ieee80211_band band; + int n_channels; + int n_bitrates; + struct ieee80211_sta_ht_cap ht_cap; +}; -extern int ieee80211_radiotap_iterator_next( - struct ieee80211_radiotap_iterator *iterator); +/* + * Wireless hardware/device configuration structures and methods + */ +/** + * struct vif_params - describes virtual interface parameters + * @mesh_id: mesh ID to use + * @mesh_id_len: length of the mesh ID + */ +struct vif_params { + u8 *mesh_id; + int mesh_id_len; +}; - /** +/** * struct key_params - key information * * Information about a key @@ -347,92 +494,6 @@ struct bss_parameters { u8 basic_rates_len; }; -/** - * enum environment_cap - Environment parsed from country IE - * @ENVIRON_ANY: indicates country IE applies to both indoor and - * outdoor operation. - * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation - * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation - */ -enum environment_cap { - ENVIRON_ANY, - ENVIRON_INDOOR, - ENVIRON_OUTDOOR, -}; - -/** - * struct regulatory_request - used to keep track of regulatory requests - * - * @wiphy_idx: this is set if this request's initiator is - * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This - * can be used by the wireless core to deal with conflicts - * and potentially inform users of which devices specifically - * cased the conflicts. - * @initiator: indicates who sent this request, could be any of - * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) - * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested - * regulatory domain. We have a few special codes: - * 00 - World regulatory domain - * 99 - built by driver but a specific alpha2 cannot be determined - * 98 - result of an intersection between two regulatory domains - * @intersect: indicates whether the wireless core should intersect - * the requested regulatory domain with the presently set regulatory - * domain. - * @country_ie_checksum: checksum of the last processed and accepted - * country IE - * @country_ie_env: lets us know if the AP is telling us we are outdoor, - * indoor, or if it doesn't matter - * @list: used to insert into the reg_requests_list linked list - */ -struct regulatory_request { - int wiphy_idx; - enum nl80211_reg_initiator initiator; - char alpha2[2]; - bool intersect; - u32 country_ie_checksum; - enum environment_cap country_ie_env; - struct list_head list; -}; - -struct ieee80211_freq_range { - u32 start_freq_khz; - u32 end_freq_khz; - u32 max_bandwidth_khz; -}; - -struct ieee80211_power_rule { - u32 max_antenna_gain; - u32 max_eirp; -}; - -struct ieee80211_reg_rule { - struct ieee80211_freq_range freq_range; - struct ieee80211_power_rule power_rule; - u32 flags; -}; - -struct ieee80211_regdomain { - u32 n_reg_rules; - char alpha2[2]; - struct ieee80211_reg_rule reg_rules[]; -}; - -#define MHZ_TO_KHZ(freq) ((freq) * 1000) -#define KHZ_TO_MHZ(freq) ((freq) / 1000) -#define DBI_TO_MBI(gain) ((gain) * 100) -#define MBI_TO_DBI(gain) ((gain) / 100) -#define DBM_TO_MBM(gain) ((gain) * 100) -#define MBM_TO_DBM(gain) ((gain) / 100) - -#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \ - .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ - .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ - .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ - .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \ - .power_rule.max_eirp = DBM_TO_MBM(eirp), \ - .flags = reg_flags, \ - } - struct mesh_config { /* Timeouts in ms */ /* Mesh plink management parameters */ @@ -853,7 +914,396 @@ struct cfg80211_ops { int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); }; -/* temporary wext handlers */ +/* + * wireless hardware and networking interfaces structures + * and registration/helper functions + */ + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/ + * @custom_regulatory: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). + * @strict_regulatory: tells us the driver for this device will ignore + * regulatory domain settings until it gets its own regulatory domain + * via its regulatory_hint(). After its gets its own regulatory domain + * it will only allow further regulatory domain settings to further + * enhance compliance. For example if channel 13 and 14 are disabled + * by this regulatory domain no user regulatory domain can enable these + * channels at a later time. This can be used for devices which do not + * have calibration information gauranteed for frequencies or settings + * outside of its regulatory domain. + * @reg_notifier: the driver's regulatory notification callback + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. + * @signal_type: signal type reported in &struct cfg80211_bss. + * @cipher_suites: supported cipher suites + * @n_cipher_suites: number of supported cipher suites + */ +struct wiphy { + /* assign these fields before you register the wiphy */ + + /* permanent MAC address */ + u8 perm_addr[ETH_ALEN]; + + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ + u16 interface_modes; + + bool custom_regulatory; + bool strict_regulatory; + + enum cfg80211_signal_type signal_type; + + int bss_priv_size; + u8 max_scan_ssids; + u16 max_scan_ie_len; + + int n_cipher_suites; + const u32 *cipher_suites; + + /* If multiple wiphys are registered and you're handed e.g. + * a regular netdev with assigned ieee80211_ptr, you won't + * know whether it points to a wiphy your driver has registered + * or not. Assign this to something global to your driver to + * help determine whether you own this wiphy or not. */ + void *privid; + + struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); + + /* fields below are read-only, assigned by cfg80211 */ + + const struct ieee80211_regdomain *regd; + + /* the item in /sys/class/ieee80211/ points to this, + * you need use set_wiphy_dev() (see below) */ + struct device dev; + + /* dir in debugfs: ieee80211/ */ + struct dentry *debugfsdir; + + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); +}; + +/** + * wiphy_priv - return priv from wiphy + * + * @wiphy: the wiphy whose priv pointer to return + */ +static inline void *wiphy_priv(struct wiphy *wiphy) +{ + BUG_ON(!wiphy); + return &wiphy->priv; +} + +/** + * set_wiphy_dev - set device pointer for wiphy + * + * @wiphy: The wiphy whose device to bind + * @dev: The device to parent it to + */ +static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) +{ + wiphy->dev.parent = dev; +} + +/** + * wiphy_dev - get wiphy dev pointer + * + * @wiphy: The wiphy whose device struct to look up + */ +static inline struct device *wiphy_dev(struct wiphy *wiphy) +{ + return wiphy->dev.parent; +} + +/** + * wiphy_name - get wiphy name + * + * @wiphy: The wiphy whose name to return + */ +static inline const char *wiphy_name(struct wiphy *wiphy) +{ + return dev_name(&wiphy->dev); +} + +/** + * wiphy_new - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * The returned pointer must be assigned to each netdev's + * ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv); + +/** + * wiphy_register - register a wiphy with cfg80211 + * + * @wiphy: The wiphy to register. + * + * Returns a non-negative wiphy index or a negative error code. + */ +extern int wiphy_register(struct wiphy *wiphy); + +/** + * wiphy_unregister - deregister a wiphy from cfg80211 + * + * @wiphy: The wiphy to unregister. + * + * After this call, no more requests can be made with this priv + * pointer, but the call may sleep to wait for an outstanding + * request that is being handled. + */ +extern void wiphy_unregister(struct wiphy *wiphy); + +/** + * wiphy_free - free wiphy + * + * @wiphy: The wiphy to free + */ +extern void wiphy_free(struct wiphy *wiphy); + +/** + * struct wireless_dev - wireless per-netdev state + * + * This structure must be allocated by the driver/stack + * that uses the ieee80211_ptr field in struct net_device + * (this is intentional so it can be allocated along with + * the netdev.) + * + * @wiphy: pointer to hardware description + * @iftype: interface type + * @list: (private) Used to collect the interfaces + * @netdev: (private) Used to reference back to the netdev + * @current_bss: (private) Used by the internal configuration code + * @bssid: (private) Used by the internal configuration code + * @ssid: (private) Used by the internal configuration code + * @ssid_len: (private) Used by the internal configuration code + * @wext: (private) Used by the internal wireless extensions compat code + * @wext_bssid: (private) Used by the internal wireless extensions compat code + */ +struct wireless_dev { + struct wiphy *wiphy; + enum nl80211_iftype iftype; + + /* private to the generic wireless code */ + struct list_head list; + struct net_device *netdev; + + /* currently used for IBSS - might be rearranged in the future */ + struct cfg80211_bss *current_bss; + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + +#ifdef CONFIG_WIRELESS_EXT + /* wext data */ + struct cfg80211_ibss_params wext; + u8 wext_bssid[ETH_ALEN]; +#endif +}; + +/** + * wdev_priv - return wiphy priv from wireless_dev + * + * @wdev: The wireless device whose wiphy's priv pointer to return + */ +static inline void *wdev_priv(struct wireless_dev *wdev) +{ + BUG_ON(!wdev); + return wiphy_priv(wdev->wiphy); +} + +/* + * Utility functions + */ + +/** + * ieee80211_channel_to_frequency - convert channel number to frequency + */ +extern int ieee80211_channel_to_frequency(int chan); + +/** + * ieee80211_frequency_to_channel - convert frequency to channel number + */ +extern int ieee80211_frequency_to_channel(int freq); + +/* + * Name indirection necessary because the ieee80211 code also has + * a function named "ieee80211_get_channel", so if you include + * cfg80211's header file you get cfg80211's version, if you try + * to include both header files you'll (rightfully!) get a symbol + * clash. + */ +extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, + int freq); +/** + * ieee80211_get_channel - get channel struct from wiphy for specified frequency + */ +static inline struct ieee80211_channel * +ieee80211_get_channel(struct wiphy *wiphy, int freq) +{ + return __ieee80211_get_channel(wiphy, freq); +} + +/** + * ieee80211_get_response_rate - get basic rate for a given rate + * + * @sband: the band to look for rates in + * @basic_rates: bitmap of basic rates + * @bitrate: the bitrate for which to find the basic rate + * + * This function returns the basic rate corresponding to a given + * bitrate, that is the next lower bitrate contained in the basic + * rate map, which is, for this function, given as a bitmap of + * indices of rates in the band's bitrate table. + */ +struct ieee80211_rate * +ieee80211_get_response_rate(struct ieee80211_supported_band *sband, + u32 basic_rates, int bitrate); + +/* + * Radiotap parsing functions -- for controlled injection support + * + * Implemented in net/wireless/radiotap.c + * Documentation in Documentation/networking/radiotap-headers.txt + */ + +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @rtheader: pointer to the radiotap header we are walking through + * @max_length: length of radiotap header in cpu byte ordering + * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg + * @this_arg: pointer to current radiotap arg + * @arg_index: internal next argument index + * @arg: internal next argument pointer + * @next_bitmap: internal pointer to next present u32 + * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *rtheader; + int max_length; + int this_arg_index; + u8 *this_arg; + + int arg_index; + u8 *arg; + __le32 *next_bitmap; + u32 bitmap_shifter; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + +/* + * Regulatory helper functions for wiphys + */ + +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * The wiphy must have been registered to cfg80211 prior to this call. + * For cfg80211 drivers this means you must first use wiphy_register(), + * for mac80211 drivers you must first use ieee80211_register_hw(). + * + * Drivers should check the return value, its possible you can get + * an -ENOMEM. + */ +extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * regulatory_hint_11d - hints a country IE as a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @country_ie: pointer to the country IE + * @country_ie_len: length of the country IE + * + * We will intersect the rd with the what CRDA tells us should apply + * for the alpha2 this country IE belongs to, this prevents APs from + * sending us incorrect or outdated information against a country. + */ +extern void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len); +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one + * you can set this to 0. If this frequency is allowed we then set + * this value to the maximum allowed bandwidth. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule); + +/* + * Temporary wext handlers & helper functions + * + * In the future cfg80211 will simply assign the entire wext handler + * structure to netdevs it manages, but we're not there yet. + */ int cfg80211_wext_giwname(struct net_device *dev, struct iw_request_info *info, char *name, char *extra); @@ -892,10 +1342,14 @@ int cfg80211_ibss_wext_giwap(struct net_device *dev, struct iw_request_info *info, struct sockaddr *ap_addr, char *extra); -/* wext helper for now (to be removed) */ struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy, struct iw_freq *freq); +/* + * callbacks for asynchronous cfg80211 methods, notification + * functions and BSS handling helpers + */ + /** * cfg80211_scan_done - notify that scan finished * @@ -949,6 +1403,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, const u8 *meshid, size_t meshidlen, const u8 *meshcfg); void cfg80211_put_bss(struct cfg80211_bss *bss); + /** * cfg80211_unlink_bss - unlink BSS from internal data structures * @wiphy: the wiphy diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 52808bd..d968691 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -19,7 +19,6 @@ #include #include #include -#include #include /** diff --git a/include/net/regulatory.h b/include/net/regulatory.h new file mode 100644 index 0000000..47995b8 --- /dev/null +++ b/include/net/regulatory.h @@ -0,0 +1,101 @@ +#ifndef __NET_REGULATORY_H +#define __NET_REGULATORY_H +/* + * regulatory support structures + * + * Copyright 2008-2009 Luis R. Rodriguez + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/** + * enum environment_cap - Environment parsed from country IE + * @ENVIRON_ANY: indicates country IE applies to both indoor and + * outdoor operation. + * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation + * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation + */ +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + +/** + * struct regulatory_request - used to keep track of regulatory requests + * + * @wiphy_idx: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter + * @list: used to insert into the reg_requests_list linked list + */ +struct regulatory_request { + int wiphy_idx; + enum nl80211_reg_initiator initiator; + char alpha2[2]; + bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; + struct list_head list; +}; + +struct ieee80211_freq_range { + u32 start_freq_khz; + u32 end_freq_khz; + u32 max_bandwidth_khz; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) ((freq) * 1000) +#define KHZ_TO_MHZ(freq) ((freq) / 1000) +#define DBI_TO_MBI(gain) ((gain) * 100) +#define MBI_TO_DBI(gain) ((gain) / 100) +#define DBM_TO_MBM(gain) ((gain) * 100) +#define MBM_TO_DBM(gain) ((gain) / 100) + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ +{ \ + .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ + .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ + .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ + .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\ + .power_rule.max_eirp = DBM_TO_MBM(eirp), \ + .flags = reg_flags, \ +} + +#endif diff --git a/include/net/wireless.h b/include/net/wireless.h deleted file mode 100644 index abd27b0..0000000 --- a/include/net/wireless.h +++ /dev/null @@ -1,492 +0,0 @@ -#ifndef __NET_WIRELESS_H -#define __NET_WIRELESS_H - -/* - * 802.11 device management - * - * Copyright 2007 Johannes Berg - */ - -#include -#include -#include -#include -#include - -/** - * enum ieee80211_band - supported frequency bands - * - * The bands are assigned this way because the supported - * bitrates differ in these bands. - * - * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band - * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) - */ -enum ieee80211_band { - IEEE80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ, - - /* keep last */ - IEEE80211_NUM_BANDS -}; - -/** - * enum ieee80211_channel_flags - channel flags - * - * Channel flags set by the regulatory control code. - * - * @IEEE80211_CHAN_DISABLED: This channel is disabled. - * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted - * on this channel. - * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. - * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. - * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel - * is not permitted. - * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel - * is not permitted. - */ -enum ieee80211_channel_flags { - IEEE80211_CHAN_DISABLED = 1<<0, - IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - IEEE80211_CHAN_NO_IBSS = 1<<2, - IEEE80211_CHAN_RADAR = 1<<3, - IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, - IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, -}; - -/** - * struct ieee80211_channel - channel definition - * - * This structure describes a single channel for use - * with cfg80211. - * - * @center_freq: center frequency in MHz - * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz - * @hw_value: hardware-specific value for the channel - * @flags: channel flags from &enum ieee80211_channel_flags. - * @orig_flags: channel flags at registration time, used by regulatory - * code to support devices with additional restrictions - * @band: band this channel belongs to. - * @max_antenna_gain: maximum antenna gain in dBi - * @max_power: maximum transmission power (in dBm) - * @beacon_found: helper to regulatory code to indicate when a beacon - * has been found on this channel. Use regulatory_hint_found_beacon() - * to enable this, this is is useful only on 5 GHz band. - * @orig_mag: internal use - * @orig_mpwr: internal use - */ -struct ieee80211_channel { - enum ieee80211_band band; - u16 center_freq; - u8 max_bandwidth; - u16 hw_value; - u32 flags; - int max_antenna_gain; - int max_power; - bool beacon_found; - u32 orig_flags; - int orig_mag, orig_mpwr; -}; - -/** - * enum ieee80211_rate_flags - rate flags - * - * Hardware/specification flags for rates. These are structured - * in a way that allows using the same bitrate structure for - * different bands/PHY modes. - * - * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short - * preamble on this bitrate; only relevant in 2.4GHz band and - * with CCK rates. - * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate - * when used with 802.11a (on the 5 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate - * when used with 802.11b (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate - * when used with 802.11g (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. - */ -enum ieee80211_rate_flags { - IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, - IEEE80211_RATE_MANDATORY_A = 1<<1, - IEEE80211_RATE_MANDATORY_B = 1<<2, - IEEE80211_RATE_MANDATORY_G = 1<<3, - IEEE80211_RATE_ERP_G = 1<<4, -}; - -/** - * struct ieee80211_rate - bitrate definition - * - * This structure describes a bitrate that an 802.11 PHY can - * operate with. The two values @hw_value and @hw_value_short - * are only for driver use when pointers to this structure are - * passed around. - * - * @flags: rate-specific flags - * @bitrate: bitrate in units of 100 Kbps - * @hw_value: driver/hardware value for this rate - * @hw_value_short: driver/hardware value for this rate when - * short preamble is used - */ -struct ieee80211_rate { - u32 flags; - u16 bitrate; - u16 hw_value, hw_value_short; -}; - -/** - * struct ieee80211_sta_ht_cap - STA's HT capabilities - * - * This structure describes most essential parameters needed - * to describe 802.11n HT capabilities for an STA. - * - * @ht_supported: is HT supported by the STA - * @cap: HT capabilities map as described in 802.11n spec - * @ampdu_factor: Maximum A-MPDU length factor - * @ampdu_density: Minimum A-MPDU spacing - * @mcs: Supported MCS rates - */ -struct ieee80211_sta_ht_cap { - u16 cap; /* use IEEE80211_HT_CAP_ */ - bool ht_supported; - u8 ampdu_factor; - u8 ampdu_density; - struct ieee80211_mcs_info mcs; -}; - -/** - * struct ieee80211_supported_band - frequency band definition - * - * This structure describes a frequency band a wiphy - * is able to operate in. - * - * @channels: Array of channels the hardware can operate in - * in this band. - * @band: the band this structure represents - * @n_channels: Number of channels in @channels - * @bitrates: Array of bitrates the hardware can operate with - * in this band. Must be sorted to give a valid "supported - * rates" IE, i.e. CCK rates first, then OFDM. - * @n_bitrates: Number of bitrates in @bitrates - */ -struct ieee80211_supported_band { - struct ieee80211_channel *channels; - struct ieee80211_rate *bitrates; - enum ieee80211_band band; - int n_channels; - int n_bitrates; - struct ieee80211_sta_ht_cap ht_cap; -}; - -/** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/ - * @custom_regulatory: tells us the driver for this device - * has its own custom regulatory domain and cannot identify the - * ISO / IEC 3166 alpha2 it belongs to. When this is enabled - * we will disregard the first regulatory hint (when the - * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @reg_notifier: the driver's regulatory notification callback - * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver - * on the reg_notifier() if it chooses to ignore future - * regulatory domain changes caused by other drivers. - * @signal_type: signal type reported in &struct cfg80211_bss. - * @cipher_suites: supported cipher suites - * @n_cipher_suites: number of supported cipher suites - */ -struct wiphy { - /* assign these fields before you register the wiphy */ - - /* permanent MAC address */ - u8 perm_addr[ETH_ALEN]; - - /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ - u16 interface_modes; - - bool custom_regulatory; - bool strict_regulatory; - - enum cfg80211_signal_type signal_type; - - int bss_priv_size; - u8 max_scan_ssids; - u16 max_scan_ie_len; - - int n_cipher_suites; - const u32 *cipher_suites; - - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ - void *privid; - - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; - - /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); - - /* fields below are read-only, assigned by cfg80211 */ - - const struct ieee80211_regdomain *regd; - - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ - struct device dev; - - /* dir in debugfs: ieee80211/ */ - struct dentry *debugfsdir; - - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); -}; - -/** struct wireless_dev - wireless per-netdev state - * - * This structure must be allocated by the driver/stack - * that uses the ieee80211_ptr field in struct net_device - * (this is intentional so it can be allocated along with - * the netdev.) - * - * @wiphy: pointer to hardware description - * @iftype: interface type - * @list: (private) - * @netdev (private) - */ -struct wireless_dev { - struct wiphy *wiphy; - enum nl80211_iftype iftype; - - /* private to the generic wireless code */ - struct list_head list; - struct net_device *netdev; - - /* currently used for IBSS - might be rearranged in the future */ - struct cfg80211_bss *current_bss; - u8 bssid[ETH_ALEN]; - u8 ssid[IEEE80211_MAX_SSID_LEN]; - u8 ssid_len; - -#ifdef CONFIG_WIRELESS_EXT - /* wext data */ - struct cfg80211_ibss_params wext; - u8 wext_bssid[ETH_ALEN]; -#endif -}; - -/** - * wiphy_priv - return priv from wiphy - */ -static inline void *wiphy_priv(struct wiphy *wiphy) -{ - BUG_ON(!wiphy); - return &wiphy->priv; -} - -/** - * set_wiphy_dev - set device pointer for wiphy - */ -static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) -{ - wiphy->dev.parent = dev; -} - -/** - * wiphy_dev - get wiphy dev pointer - */ -static inline struct device *wiphy_dev(struct wiphy *wiphy) -{ - return wiphy->dev.parent; -} - -/** - * wiphy_name - get wiphy name - */ -static inline const char *wiphy_name(struct wiphy *wiphy) -{ - return dev_name(&wiphy->dev); -} - -/** - * wdev_priv - return wiphy priv from wireless_dev - */ -static inline void *wdev_priv(struct wireless_dev *wdev) -{ - BUG_ON(!wdev); - return wiphy_priv(wdev->wiphy); -} - -/** - * wiphy_new - create a new wiphy for use with cfg80211 - * - * create a new wiphy and associate the given operations with it. - * @sizeof_priv bytes are allocated for private use. - * - * the returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. - */ -struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv); - -/** - * wiphy_register - register a wiphy with cfg80211 - * - * register the given wiphy - * - * Returns a non-negative wiphy index or a negative error code. - */ -extern int wiphy_register(struct wiphy *wiphy); - -/** - * wiphy_unregister - deregister a wiphy from cfg80211 - * - * unregister a device with the given priv pointer. - * After this call, no more requests can be made with this priv - * pointer, but the call may sleep to wait for an outstanding - * request that is being handled. - */ -extern void wiphy_unregister(struct wiphy *wiphy); - -/** - * wiphy_free - free wiphy - */ -extern void wiphy_free(struct wiphy *wiphy); - -/** - * ieee80211_channel_to_frequency - convert channel number to frequency - */ -extern int ieee80211_channel_to_frequency(int chan); - -/** - * ieee80211_frequency_to_channel - convert frequency to channel number - */ -extern int ieee80211_frequency_to_channel(int freq); - -/* - * Name indirection necessary because the ieee80211 code also has - * a function named "ieee80211_get_channel", so if you include - * cfg80211's header file you get cfg80211's version, if you try - * to include both header files you'll (rightfully!) get a symbol - * clash. - */ -extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, - int freq); -/** - * ieee80211_get_channel - get channel struct from wiphy for specified frequency - */ -static inline struct ieee80211_channel * -ieee80211_get_channel(struct wiphy *wiphy, int freq) -{ - return __ieee80211_get_channel(wiphy, freq); -} - -/** - * ieee80211_get_response_rate - get basic rate for a given rate - * - * @sband: the band to look for rates in - * @basic_rates: bitmap of basic rates - * @bitrate: the bitrate for which to find the basic rate - * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. - */ -struct ieee80211_rate * -ieee80211_get_response_rate(struct ieee80211_supported_band *sband, - u32 basic_rates, int bitrate); - -/** - * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. - * - * Wireless drivers can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. - * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. - * - * The wiphy must have been registered to cfg80211 prior to this call. - * For cfg80211 drivers this means you must first use wiphy_register(), - * for mac80211 drivers you must first use ieee80211_register_hw(). - * - * Drivers should check the return value, its possible you can get - * an -ENOMEM. - */ -extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); - -/** - * regulatory_hint_11d - hints a country IE as a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @country_ie: pointer to the country IE - * @country_ie_len: length of the country IE - * - * We will intersect the rd with the what CRDA tells us should apply - * for the alpha2 this country IE belongs to, this prevents APs from - * sending us incorrect or outdated information against a country. - */ -extern void regulatory_hint_11d(struct wiphy *wiphy, - u8 *country_ie, - u8 country_ie_len); -/** - * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain - * @wiphy: the wireless device we want to process the regulatory domain on - * @regd: the custom regulatory domain to use for this wiphy - * - * Drivers can sometimes have custom regulatory domains which do not apply - * to a specific country. Drivers can use this to apply such custom regulatory - * domains. This routine must be called prior to wiphy registration. The - * custom regulatory domain will be trusted completely and as such previous - * default channel settings will be disregarded. If no rule is found for a - * channel on the regulatory domain the channel will be disabled. - */ -extern void wiphy_apply_custom_regulatory( - struct wiphy *wiphy, - const struct ieee80211_regdomain *regd); - -/** - * freq_reg_info - get regulatory information for the given frequency - * @wiphy: the wiphy for which we want to process this rule for - * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. - * @reg_rule: the regulatory rule which we have for this frequency - * - * Use this function to get the regulatory rule for a specific frequency on - * a given wireless device. If the device has a specific regulatory domain - * it wants to follow we respect that unless a country IE has been received - * and processed already. - * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. - */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule); - -#endif /* __NET_WIRELESS_H */ diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 73bd4277..0891bfb 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -14,7 +14,6 @@ */ #include -#include #include #include "ieee80211_i.h" #include "rate.h" diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e770c1e8..92a573b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include "key.h" diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c index 5f7a262..48bf78e 100644 --- a/net/mac80211/spectmgmt.c +++ b/net/mac80211/spectmgmt.c @@ -15,7 +15,7 @@ */ #include -#include +#include #include #include "ieee80211_i.h" #include "sta_info.h" diff --git a/net/wireless/core.c b/net/wireless/core.c index de1ac51..827a562 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -14,7 +14,6 @@ #include #include #include -#include #include "nl80211.h" #include "core.h" #include "sysfs.h" diff --git a/net/wireless/core.h b/net/wireless/core.h index 2ef3595..89a8159 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -11,7 +11,6 @@ #include #include #include -#include #include #include "reg.h" diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 2bf42fd..4e1fcb0 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -7,7 +7,6 @@ #include #include #include -#include #include "nl80211.h" diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 574e217..f38cc39 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include "core.h" #include "reg.h" diff --git a/net/wireless/util.c b/net/wireless/util.c index 487cdd9..5f7e997 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1,10 +1,10 @@ /* * Wireless utility functions * - * Copyright 2007 Johannes Berg + * Copyright 2007-2009 Johannes Berg */ -#include -#include +#include +#include #include "core.h" struct ieee80211_rate * diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 57eaea26..4e054ea 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include "core.h" -- cgit v0.10.2