From 5df07b74f671d1dfc1d81c3e791c335183cfc515 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 14 Apr 2015 15:23:25 +1000 Subject: Remove celleb-only SCC PATA drivers The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: "David S. Miller" CC: linux-ide@vger.kernel.org CC: Valentin Rothberg CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Daniel Axtens Signed-off-by: Tejun Heo diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..ee5209f 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -729,15 +729,6 @@ config PATA_SC1200 If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB - help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. - - If unsure, say N. - config PATA_SCH tristate "Intel SCH PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b67e995..40f7865 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o -obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c deleted file mode 100644 index 5cd60d6..0000000 --- a/drivers/ata/pata_scc.c +++ /dev/null @@ -1,1110 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ata/ata_piix.c: - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc - * - * and drivers/ata/ahci.c: - * Copyright 2004-2005 Red Hat, Inc. - * - * and drivers/ata/libata-core.c: - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata_scc" -#define DRV_VERSION "0.3" - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -/* PCI BARs */ -#define SCC_CTRL_BAR 0 -#define SCC_BMID_BAR 1 - -/* offset of CTRL registers */ -#define SCC_CTL_PIOSHT 0x000 -#define SCC_CTL_PIOCT 0x004 -#define SCC_CTL_MDMACT 0x008 -#define SCC_CTL_MCRCST 0x00C -#define SCC_CTL_SDMACT 0x010 -#define SCC_CTL_SCRCST 0x014 -#define SCC_CTL_UDENVT 0x018 -#define SCC_CTL_TDVHSEL 0x020 -#define SCC_CTL_MODEREG 0x024 -#define SCC_CTL_ECMODE 0xF00 -#define SCC_CTL_MAEA0 0xF50 -#define SCC_CTL_MAEC0 0xF54 -#define SCC_CTL_CCKCTRL 0xFF0 - -/* offset of BMID registers */ -#define SCC_DMA_CMD 0x000 -#define SCC_DMA_STATUS 0x004 -#define SCC_DMA_TABLE_OFS 0x008 -#define SCC_DMA_INTMASK 0x010 -#define SCC_DMA_INTST 0x014 -#define SCC_DMA_PTERADD 0x018 -#define SCC_REG_CMD_ADDR 0x020 -#define SCC_REG_DATA 0x000 -#define SCC_REG_ERR 0x004 -#define SCC_REG_FEATURE 0x004 -#define SCC_REG_NSECT 0x008 -#define SCC_REG_LBAL 0x00C -#define SCC_REG_LBAM 0x010 -#define SCC_REG_LBAH 0x014 -#define SCC_REG_DEVICE 0x018 -#define SCC_REG_STATUS 0x01C -#define SCC_REG_CMD 0x01C -#define SCC_REG_ALTSTATUS 0x020 - -/* register value */ -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define ECMODE_VALUE 0x01 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - - -/* PIO transfer mode table */ -/* JCHST */ -static const unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static const unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static const unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static const unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static const unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static const unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static const unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static const unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0}, - { } /* terminate list */ -}; - -/** - * scc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; - void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; - unsigned long reg; - int offset; - - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32(piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32(pioct_port, reg); -} - -/** - * scc_set_dmamode - Initialize host controller PATA DMA timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set UDMA mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; - unsigned int is_slave = (adev->devno != 0); - u8 speed = udma; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; - void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; - void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; - void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; - void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; - void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; - int offset, idx; - - if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - if (speed >= XFER_UDMA_0) - idx = speed - XFER_UDMA_0; - else - return; - - if (is_slave) { - out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); - } else { - out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); - } - out_be32(udenvt_port, - JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); -} - -unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) -{ - /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ - if (adev->class == ATA_DEV_ATAPI && - (mask & (0xE0 << ATA_SHIFT_UDMA))) { - printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); - mask &= ~(0xE0 << ATA_SHIFT_UDMA); - } - return mask; -} - -/** - * scc_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_tf_load(). - */ - -static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - out_be32(ioaddr->feature_addr, tf->hob_feature); - out_be32(ioaddr->nsect_addr, tf->hob_nsect); - out_be32(ioaddr->lbal_addr, tf->hob_lbal); - out_be32(ioaddr->lbam_addr, tf->hob_lbam); - out_be32(ioaddr->lbah_addr, tf->hob_lbah); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - out_be32(ioaddr->feature_addr, tf->feature); - out_be32(ioaddr->nsect_addr, tf->nsect); - out_be32(ioaddr->lbal_addr, tf->lbal); - out_be32(ioaddr->lbam_addr, tf->lbam); - out_be32(ioaddr->lbah_addr, tf->lbah); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - out_be32(ioaddr->device_addr, tf->device); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * scc_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Note: Original code is ata_check_status(). - */ - -static u8 scc_check_status (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.status_addr); -} - -/** - * scc_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Note: Original code is ata_sff_tf_read(). - */ - -static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = scc_check_status(ap); - tf->feature = in_be32(ioaddr->error_addr); - tf->nsect = in_be32(ioaddr->nsect_addr); - tf->lbal = in_be32(ioaddr->lbal_addr); - tf->lbam = in_be32(ioaddr->lbam_addr); - tf->lbah = in_be32(ioaddr->lbah_addr); - tf->device = in_be32(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); - tf->hob_feature = in_be32(ioaddr->error_addr); - tf->hob_nsect = in_be32(ioaddr->nsect_addr); - tf->hob_lbal = in_be32(ioaddr->lbal_addr); - tf->hob_lbam = in_be32(ioaddr->lbam_addr); - tf->hob_lbah = in_be32(ioaddr->lbah_addr); - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - } -} - -/** - * scc_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_exec_command(). - */ - -static void scc_exec_command (struct ata_port *ap, - const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); - - out_be32(ap->ioaddr.command_addr, tf->command); - ata_sff_pause(ap); -} - -/** - * scc_check_altstatus - Read device alternate status reg - * @ap: port where the device is - */ - -static u8 scc_check_altstatus (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.altstatus_addr); -} - -/** - * scc_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Note: Original code is ata_sff_dev_select(). - */ - -static void scc_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - out_be32(ap->ioaddr.device_addr, tmp); - ata_sff_pause(ap); -} - -/** - * scc_set_devctl - Write device control reg - * @ap: port where the device is - * @ctl: value to write - */ - -static void scc_set_devctl(struct ata_port *ap, u8 ctl) -{ - out_be32(ap->ioaddr.ctl_addr, ctl); -} - -/** - * scc_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_setup(). - */ - -static void scc_bmdma_setup (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* load PRD table addr */ - out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma); - - /* specify data direction, triple-check start bit is clear */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - out_be32(mmio + SCC_DMA_CMD, dmactl); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} - -/** - * scc_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ - -static void scc_bmdma_start (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* start host DMA transaction */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); -} - -/** - * scc_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Note: Original code is ata_devchk(). - */ - -static unsigned int scc_devchk (struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->sff_dev_select(ap, device); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - out_be32(ioaddr->nsect_addr, 0xaa); - out_be32(ioaddr->lbal_addr, 0x55); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * scc_wait_after_reset - wait for devices to become ready after reset - * - * Note: Original code is ata_sff_wait_after_reset - */ - -static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - ata_msleep(ap, 150); - - /* always check readiness of the master device */ - rc = ata_sff_wait_ready(link, deadline); - /* -ENODEV means the odd clown forgot the D7 pulldown resistor - * and TF status is 0xff, bail out on it too. - */ - if (rc) - return rc; - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->sff_dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - ata_msleep(ap, 50); /* give drive a breather */ - } - - rc = ata_sff_wait_ready(link, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->sff_dev_select(ap, 0); - if (dev1) - ap->ops->sff_dev_select(ap, 1); - if (dev0) - ap->ops->sff_dev_select(ap, 0); - - return ret; -} - -/** - * scc_bus_softreset - PATA device software reset - * - * Note: Original code is ata_bus_softreset(). - */ - -static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - out_be32(ioaddr->ctl_addr, ap->ctl); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl); - - return scc_wait_after_reset(&ap->link, devmask, deadline); -} - -/** - * scc_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * @deadline: deadline jiffies for the operation - * - * Note: Original code is ata_sff_softreset(). - */ - -static int scc_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - /* determine if device 0/1 are present */ - if (scc_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && scc_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = scc_bus_softreset(ap, devmask, deadline); - if (rc) { - ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_sff_dev_classify(&ap->link.device[1], - devmask & (1 << 1), &err); - - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * scc_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - */ - -static void scc_bmdma_stop (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; - u32 reg; - - while (1) { - reg = in_be32(bmid_base + SCC_DMA_INTST); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); - maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - unsigned int classes; - unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); - printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); - /* TBD: SW reset */ - scc_softreset(&ap->link, &classes, deadline); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); - continue; - } - break; - } - - /* clear start/stop bit */ - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); /* dummy read */ -} - -/** - * scc_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - */ - -static u8 scc_bmdma_status (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); - static int retry = 0; - - /* return if IOS_SS is cleared */ - if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) - return host_stat; - - /* errata A252,A308 workaround: Step4 */ - if ((scc_check_altstatus(ap) & ATA_ERR) - && (int_status & INTSTS_INTRQ)) - return (host_stat | ATA_DMA_INTR); - - /* errata A308 workaround Step5 */ - if (int_status & INTSTS_IOIRQS) { - host_stat |= ATA_DMA_INTR; - - /* We don't check ATAPI DMA because it is limited to UDMA4 */ - if ((qc->tf.protocol == ATA_PROT_DMA && - qc->dev->xfer_mode > XFER_UDMA_4)) { - if (!(int_status & INTSTS_ACTEINT)) { - printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", - ap->print_id); - host_stat |= ATA_DMA_ERR; - if (retry++) - ap->udma_mask &= ~(1 << qc->dev->xfer_mode); - } else - retry = 0; - } - } - - return host_stat; -} - -/** - * scc_data_xfer - Transfer data by PIO - * @dev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Note: Original code is ata_sff_data_xfer(). - */ - -static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - unsigned int words = buflen >> 1; - unsigned int i; - __le16 *buf16 = (__le16 *) buf; - void __iomem *mmio = ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(in_be32(mmio)); - else - for (i = 0; i < words; i++) - out_be32(mmio, le16_to_cpu(buf16[i])); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(in_be32(mmio)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, le16_to_cpu(align_buf[0])); - } - words++; - } - - return words << 1; -} - -/** - * scc_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * Note: Original code is ata_sff_postreset(). - */ - -static void scc_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - - DPRINTK("ENTER\n"); - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - out_be32(ap->ioaddr.ctl_addr, ap->ctl); - - DPRINTK("EXIT\n"); -} - -/** - * scc_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_irq_clear(). - */ - -static void scc_irq_clear (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - if (!mmio) - return; - - out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); -} - -/** - * scc_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Allocate space for PRD table using ata_bmdma_port_start(). - * Set PRD table address for PTERADD. (PRD Transfer End Read) - */ - -static int scc_port_start (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - int rc; - - rc = ata_bmdma_port_start(ap); - if (rc) - return rc; - - out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma); - return 0; -} - -/** - * scc_port_stop - Undo scc_port_start() - * @ap: Port to shut down - * - * Reset PTERADD. - */ - -static void scc_port_stop (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - out_be32(mmio + SCC_DMA_PTERADD, 0); -} - -static struct scsi_host_template scc_sht = { - ATA_BMDMA_SHT(DRV_NAME), -}; - -static struct ata_port_operations scc_pata_ops = { - .inherits = &ata_bmdma_port_ops, - - .set_piomode = scc_set_piomode, - .set_dmamode = scc_set_dmamode, - .mode_filter = scc_mode_filter, - - .sff_tf_load = scc_tf_load, - .sff_tf_read = scc_tf_read, - .sff_exec_command = scc_exec_command, - .sff_check_status = scc_check_status, - .sff_check_altstatus = scc_check_altstatus, - .sff_dev_select = scc_dev_select, - .sff_set_devctl = scc_set_devctl, - - .bmdma_setup = scc_bmdma_setup, - .bmdma_start = scc_bmdma_start, - .bmdma_stop = scc_bmdma_stop, - .bmdma_status = scc_bmdma_status, - .sff_data_xfer = scc_data_xfer, - - .cable_detect = ata_cable_80wire, - .softreset = scc_softreset, - .postreset = scc_postreset, - - .sff_irq_clear = scc_irq_clear, - - .port_start = scc_port_start, - .port_stop = scc_port_stop, -}; - -static struct ata_port_info scc_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - /* No MWDMA */ - .udma_mask = ATA_UDMA6, - .port_ops = &scc_pata_ops, - }, -}; - -/** - * scc_reset_controller - initialize SCC PATA controller. - */ - -static int scc_reset_controller(struct ata_host *host) -{ - void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; - void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; - void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; - void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; - u32 reg = 0; - - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32(cckctrl_port, reg); - - for (;;) { - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32(cckctrl_port, reg); - out_be32(ecmode_port, ECMODE_VALUE); - out_be32(mode_port, MODE_JCUSFEN); - out_be32(intmask_port, INTMASK_MSK); - - if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { - printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); - return -EIO; - } - - return 0; -} - -/** - * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. - * @ioaddr: IO address structure to be initialized - * @base: base address of BMID region - */ - -static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) -{ - ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; - ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->bmdma_addr = base; - ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; -} - -static int scc_host_init(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - int rc; - - rc = scc_reset_controller(host); - if (rc) - return rc; - - rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - - scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); - - pci_set_master(pdev); - - return 0; -} - -/** - * scc_init_one - Register SCC PATA device with kernel services - * @pdev: PCI device to register - * @ent: Entry in scc_pci_tbl matching with @pdev - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - unsigned int board_idx = (unsigned int) ent->driver_data; - const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; - struct ata_host *host; - int rc; - - ata_print_version_once(&pdev->dev, DRV_VERSION); - - host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); - if (!host) - return -ENOMEM; - - rc = pcim_enable_device(pdev); - if (rc) - return rc; - - rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - host->iomap = pcim_iomap_table(pdev); - - ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); - ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); - - rc = scc_host_init(host); - if (rc) - return rc; - - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &scc_sht); -} - -static struct pci_driver scc_pci_driver = { - .name = DRV_NAME, - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM_SLEEP - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -#endif -}; - -module_pci_driver(scc_pci_driver); - -MODULE_AUTHOR("Toshiba corp"); -MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); -MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a04c49f..39ea67f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -643,15 +643,6 @@ config BLK_DEV_TC86C001 help This driver adds support for Toshiba TC86C001 GOKU-S chip. -config BLK_DEV_CELLEB - tristate "Toshiba's Cell Reference Set IDE support" - depends on PPC_CELLEB - select BLK_DEV_IDEDMA_PCI - help - This driver provides support for the on-board IDE controller on - Toshiba Cell Reference Board. - If unsure, say Y. - endif # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a04ee82..2a8c417 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c deleted file mode 100644 index 2a2d188..0000000 --- a/drivers/ide/scc_pata.c +++ /dev/null @@ -1,887 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ide/pci/siimage.c: - * Copyright (C) 2001-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -#define SCC_PATA_NAME "scc IDE" - -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - -#define ECMODE_VALUE 0x01 - -static struct scc_ports { - unsigned long ctl, dma; - struct ide_host *host; /* for removing port from system */ -} scc_ports[MAX_HWIFS]; - -/* PIO transfer mode table */ -/* JCHST */ -static unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - - -static u8 scc_ide_inb(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u8)data; -} - -static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - out_be32((void *)hwif->io_ports.command_addr, cmd); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static u8 scc_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.status_addr); -} - -static u8 scc_read_altstatus(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.ctl_addr); -} - -static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)(hwif->dma_base + 4)); -} - -static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) -{ - out_be32((void *)hwif->io_ports.ctl_addr, ctl); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static void scc_ide_insw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_insl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_outb(u8 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - -static void -scc_ide_outsw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -static void -scc_ide_outsl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -/** - * scc_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long piosht_port = ctl_base + 0x000; - unsigned long pioct_port = ctl_base + 0x004; - unsigned long reg; - int offset; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32((void __iomem *)piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32((void __iomem *)pioct_port, reg); -} - -/** - * scc_set_dma_mode - set host controller for DMA mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long mdmact_port = ctl_base + 0x008; - unsigned long mcrcst_port = ctl_base + 0x00c; - unsigned long sdmact_port = ctl_base + 0x010; - unsigned long scrcst_port = ctl_base + 0x014; - unsigned long udenvt_port = ctl_base + 0x018; - unsigned long tdvhsel_port = ctl_base + 0x020; - int is_slave = drive->dn & 1; - int offset, idx; - unsigned long reg; - unsigned long jcactsel; - const u8 speed = drive->dma_mode; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - - idx = speed - XFER_UDMA_0; - - jcactsel = JCACTSELtbl[offset][idx]; - if (is_slave) { - out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); - jcactsel = jcactsel << 2; - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); - } else { - out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); - } - reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; - out_be32((void __iomem *)udenvt_port, reg); -} - -static void scc_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - u8 unit = drive->dn & 1; - u8 dma_stat = scc_dma_sff_read_status(hwif); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - scc_ide_outb(dma_stat, hwif->dma_base + 4); -} - -/** - * scc_dma_setup - begin a DMA phase - * @drive: target device - * @cmd: command - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers. - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; - u8 dma_stat; - - /* fall back to pio! */ - if (ide_build_dmatable(drive, cmd) == 0) - return 1; - - /* PRD table */ - out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); - - /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, rw); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = scc_dma_sff_read_status(hwif); - - /* clear INTR & ERROR flags */ - out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - - return 0; -} - -static void scc_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd = scc_ide_inb(hwif->dma_base); - - /* start DMA */ - scc_ide_outb(dma_cmd | 1, hwif->dma_base); -} - -static int __scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_stat, dma_cmd; - - /* get DMA command mode */ - dma_cmd = scc_ide_inb(hwif->dma_base); - /* stop DMA */ - scc_ide_outb(dma_cmd & ~1, hwif->dma_base); - /* get DMA status */ - dma_stat = scc_dma_sff_read_status(hwif); - /* clear the INTR & ERROR bits */ - scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* verify good DMA status */ - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -/** - * scc_dma_end - Stop DMA - * @drive: IDE drive - * - * Check and clear INT Status register. - * Then call __scc_dma_end(). - */ - -static int scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - void __iomem *dma_base = (void __iomem *)hwif->dma_base; - unsigned long intsts_port = hwif->dma_base + 0x014; - u32 reg; - int dma_stat, data_loss = 0; - static int retry = 0; - - /* errata A308 workaround: Step5 (check data loss) */ - /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { - reg = in_be32((void __iomem *)intsts_port); - if (!(reg & INTSTS_ACTEINT)) { - printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", - drive->name); - data_loss = 1; - if (retry++) { - struct request *rq = hwif->rq; - ide_drive_t *drive; - int i; - - /* ERROR_RESET and drive->crc_count are needed - * to reduce DMA transfer mode in retry process. - */ - if (rq) - rq->errors |= ERROR_RESET; - - ide_port_for_each_dev(i, drive, hwif) - drive->crc_count++; - } - } - } - - while (1) { - reg = in_be32((void __iomem *)intsts_port); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - unsigned long ctl_base = hwif->config_data; - - maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); - maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); - - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); - - out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - - printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); - - ide_do_reset(drive); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32((void __iomem *)intsts_port, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); - continue; - } - break; - } - - dma_stat = __scc_dma_end(drive); - if (data_loss) - dma_stat |= 2; /* emulate DMA error (to retry command) */ - return dma_stat; -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int scc_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); - - /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - (int_stat & INTSTS_INTRQ)) - return 1; - - /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ - if (int_stat & INTSTS_IOIRQS) - return 1; - - return 0; -} - -static u8 scc_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask; - - /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ - if ((drive->media != ide_disk) && (mask & 0xE0)) { - printk(KERN_INFO "%s: limit %s to UDMA4\n", - SCC_PATA_NAME, drive->name); - mask = ATA_UDMA4; - } - - return mask; -} - -/** - * setup_mmio_scc - map CTRL/BMID region - * @dev: PCI device we are configuring - * @name: device name - * - */ - -static int setup_mmio_scc (struct pci_dev *dev, const char *name) -{ - void __iomem *ctl_addr; - void __iomem *dma_addr; - int i, ret; - - for (i = 0; i < MAX_HWIFS; i++) { - if (scc_ports[i].ctl == 0) - break; - } - if (i >= MAX_HWIFS) - return -ENOMEM; - - ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); - if (ret < 0) { - printk(KERN_ERR "%s: can't reserve resources\n", name); - return ret; - } - - ctl_addr = pci_ioremap_bar(dev, 0); - if (!ctl_addr) - goto fail_0; - - dma_addr = pci_ioremap_bar(dev, 1); - if (!dma_addr) - goto fail_1; - - pci_set_master(dev); - scc_ports[i].ctl = (unsigned long)ctl_addr; - scc_ports[i].dma = (unsigned long)dma_addr; - pci_set_drvdata(dev, (void *) &scc_ports[i]); - - return 1; - - fail_1: - iounmap(ctl_addr); - fail_0: - return -ENOMEM; -} - -static int scc_ide_setup_pci_device(struct pci_dev *dev, - const struct ide_port_info *d) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host; - struct ide_hw hw, *hws[] = { &hw }; - int i, rc; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 8; i++) - hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; - hw.irq = dev->irq; - hw.dev = &dev->dev; - - rc = ide_host_add(d, hws, 1, &host); - if (rc) - return rc; - - ports->host = host; - - return 0; -} - -/** - * init_setup_scc - set up an SCC PATA Controller - * @dev: PCI device - * @d: IDE port info - * - * Perform the initial set up for this device. - */ - -static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) -{ - unsigned long ctl_base; - unsigned long dma_base; - unsigned long cckctrl_port; - unsigned long intmask_port; - unsigned long mode_port; - unsigned long ecmode_port; - u32 reg = 0; - struct scc_ports *ports; - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto end; - - rc = setup_mmio_scc(dev, d->name); - if (rc < 0) - goto end; - - ports = pci_get_drvdata(dev); - ctl_base = ports->ctl; - dma_base = ports->dma; - cckctrl_port = ctl_base + 0xff0; - intmask_port = dma_base + 0x010; - mode_port = ctl_base + 0x024; - ecmode_port = ctl_base + 0xf00; - - /* controller initialization */ - reg = 0; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32((void*)cckctrl_port, reg); - - for (;;) { - reg = in_be32((void*)cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32((void*)cckctrl_port, reg); - - out_be32((void*)ecmode_port, ECMODE_VALUE); - out_be32((void*)mode_port, MODE_JCUSFEN); - out_be32((void*)intmask_port, INTMASK_MSK); - - rc = scc_ide_setup_pci_device(dev, d); - - end: - return rc; -} - -static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - scc_ide_outb(tf->device, io_ports->device_addr); -} - -static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - tf->device = scc_ide_inb(io_ports->device_addr); -} - -static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_insl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_insw(data_addr, buf, len / 2); -} - -static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_outsl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_outsw(data_addr, buf, len / 2); -} - -/** - * init_mmio_iops_scc - set up the iops for MMIO - * @hwif: interface to set up - * - */ - -static void init_mmio_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct scc_ports *ports = pci_get_drvdata(dev); - unsigned long dma_base = ports->dma; - - ide_set_hwifdata(hwif, ports); - - hwif->dma_base = dma_base; - hwif->config_data = ports->ctl; -} - -/** - * init_iops_scc - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SCC hardware interface - * and then do the MMIO setup. - */ - -static void init_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->hwif_data = NULL; - if (pci_get_drvdata(dev) == NULL) - return; - init_mmio_iops_scc(hwif); -} - -static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - return ide_allocate_dma_engine(hwif); -} - -static u8 scc_cable_detect(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/** - * init_hwif_scc - set up hwif - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SCC - * requires several custom handlers so we override the default - * ide DMA handlers appropriately. - */ - -static void init_hwif_scc(ide_hwif_t *hwif) -{ - /* PTERADD */ - out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) - hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ - else - hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ -} - -static const struct ide_tp_ops scc_tp_ops = { - .exec_command = scc_exec_command, - .read_status = scc_read_status, - .read_altstatus = scc_read_altstatus, - .write_devctl = scc_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = scc_tf_load, - .tf_read = scc_tf_read, - - .input_data = scc_input_data, - .output_data = scc_output_data, -}; - -static const struct ide_port_ops scc_port_ops = { - .set_pio_mode = scc_set_pio_mode, - .set_dma_mode = scc_set_dma_mode, - .udma_filter = scc_udma_filter, - .cable_detect = scc_cable_detect, -}; - -static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = scc_dma_host_set, - .dma_setup = scc_dma_setup, - .dma_start = scc_dma_start, - .dma_end = scc_dma_end, - .dma_test_irq = scc_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_sff_read_status = scc_dma_sff_read_status, -}; - -static const struct ide_port_info scc_chipset = { - .name = "sccIDE", - .init_iops = init_iops_scc, - .init_dma = scc_init_dma, - .init_hwif = init_hwif_scc, - .tp_ops = &scc_tp_ops, - .port_ops = &scc_port_ops, - .dma_ops = &scc_dma_ops, - .host_flags = IDE_HFLAG_SINGLE, - .irq_flags = IRQF_SHARED, - .pio_mask = ATA_PIO4, - .chipset = ide_pci, -}; - -/** - * scc_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SCC PATA controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return init_setup_scc(dev, &scc_chipset); -} - -/** - * scc_remove - pci layer remove entry - * @dev: PCI device - * - * Called by the PCI code when it removes an SCC PATA controller. - */ - -static void scc_remove(struct pci_dev *dev) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host = ports->host; - - ide_host_remove(host); - - iounmap((void*)ports->dma); - iounmap((void*)ports->ctl); - pci_release_selected_regions(dev, (1 << 2) - 1); - memset(ports, 0, sizeof(*ports)); -} - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); - -static struct pci_driver scc_pci_driver = { - .name = "SCC IDE", - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = scc_remove, -}; - -static int __init scc_ide_init(void) -{ - return ide_pci_register_driver(&scc_pci_driver); -} - -static void __exit scc_ide_exit(void) -{ - pci_unregister_driver(&scc_pci_driver); -} - -module_init(scc_ide_init); -module_exit(scc_ide_exit); - -MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 8844d0f1cb921f70ca09f6b54feeba0b90db072c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 13 Apr 2015 21:24:48 -0700 Subject: spi: bcm2835: Add GPIOLIB dependency Fix: drivers/spi/spi-bcm2835.c: In function 'chip_match_name': drivers/spi/spi-bcm2835.c:356:21: error: dereferencing pointer to incomplete type drivers/spi/spi-bcm2835.c: In function 'bcm2835_spi_setup': drivers/spi/spi-bcm2835.c:382:2: error: ` implicit declaration of function 'gpiochip_find' drivers/spi/spi-bcm2835.c:387:21: error: dereferencing pointer to incomplete type by adding the now mandatory GPIOLIB dependency. Fixes: a30a555d7435 ("spi: bcm2835: transform native-cs to gpio-cs on first spi_setup") Cc: Martin Sperl Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbe..00cc019 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -78,6 +78,7 @@ config SPI_ATMEL config SPI_BCM2835 tristate "BCM2835 SPI controller" depends on ARCH_BCM2835 || COMPILE_TEST + depends on GPIOLIB help This selects a driver for the Broadcom BCM2835 SPI master. -- cgit v0.10.2 From 8d7dc9283f399e1fda4e48a1c453f689326d9396 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 14 Apr 2015 19:33:59 -0700 Subject: rcu: Control grace-period delays directly from value In a misguided attempt to avoid an #ifdef, the use of the gp_init_delay module parameter was conditioned on the corresponding RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at the point of use in the code. This meant that the compiler always saw the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be unconditionally defined. This in turn caused "make oldconfig" to ask pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY in cases where it was not even used. This commit avoids these pointless questions by defining gp_init_delay under #ifdef. In one branch, gp_init_delay is initialized to RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus allowing boot-time modification), and in the other branch gp_init_delay is a const variable initialized by default to zero. This approach also simplifies the code at the delay point by eliminating the IS_DEFINED(). Because gp_init_delay is constant zero in the no-delay case intended for production use, the "gp_init_delay > 0" check causes the delay to become dead code, as desired in this case. In addition, this commit replaces magic constant "10" with the preprocessor variable PER_RCU_NODE_PERIOD, which controls the number of grace periods that are allowed to elapse at full speed before a delay is inserted. Reported-by: Linus Torvalds Signed-off-by: Paul E. McKenney diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index 233165d..8cf7304 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -162,11 +162,14 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp); static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO; module_param(kthread_prio, int, 0644); -/* Delay in jiffies for grace-period initialization delays. */ -static int gp_init_delay = IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) - ? CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY - : 0; +/* Delay in jiffies for grace-period initialization delays, debug only. */ +#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT +static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY; module_param(gp_init_delay, int, 0644); +#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */ +static const int gp_init_delay; +#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */ +#define PER_RCU_NODE_PERIOD 10 /* Number of grace periods between delays. */ /* * Track the rcutorture test sequence number and the update version @@ -1843,9 +1846,8 @@ static int rcu_gp_init(struct rcu_state *rsp) raw_spin_unlock_irq(&rnp->lock); cond_resched_rcu_qs(); ACCESS_ONCE(rsp->gp_activity) = jiffies; - if (IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) && - gp_init_delay > 0 && - !(rsp->gpnum % (rcu_num_nodes * 10))) + if (gp_init_delay > 0 && + !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD))) schedule_timeout_uninterruptible(gp_init_delay); } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1ad74c0..5f5ff7d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1268,6 +1268,7 @@ config RCU_TORTURE_TEST_SLOW_INIT_DELAY int "How much to slow down RCU grace-period initialization" range 0 5 default 3 + depends on RCU_TORTURE_TEST_SLOW_INIT help This option specifies the number of jiffies to wait between each rcu_node structure initialization. -- cgit v0.10.2 From 145367baa492246cc19d7e859db642e6fed6908e Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Thu, 16 Apr 2015 07:51:26 +0000 Subject: spi: bcm2835: change timeout of polling driver to 1s The way that the timeout code is written in the polling function the timeout does also trigger when interrupted or rescheduled while in the polling loop. This patch changes the timeout from effectively 20ms (=2 jiffies) to 1 second and removes the time that the transfer really takes out of the computation, as - per design - this is <30us and the jiffie resolution is 10ms so that does not make any difference what so ever. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index f63864a..37875cf 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -164,13 +164,12 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, unsigned long xfer_time_us) { struct bcm2835_spi *bs = spi_master_get_devdata(master); - unsigned long timeout = jiffies + - max(4 * xfer_time_us * HZ / 1000000, 2uL); + /* set timeout to 1 second of maximum polling */ + unsigned long timeout = jiffies + HZ; /* enable HW block without interrupts */ bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA); - /* set timeout to 4x the expected time, or 2 jiffies */ /* loop until finished the transfer */ while (bs->rx_len) { /* read from fifo as much as possible */ -- cgit v0.10.2 From f8bb820da4ae863c676156627973a950129559fb Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Thu, 16 Apr 2015 10:54:18 +0800 Subject: spi: check tx_buf and rx_buf in spi_unmap_msg Some spi device drivers use the same tx_buf and rx_buf repeatly for better performance such as driver/input/touchsreen/ads7846.c, but spi core grab tx_buf /rx_buf of transfer and set them as dummy_tx/dummy_rx once they are NULL. Thus, in the second time the tx_buf/rx_buf will be replaced by dummy_tx/dummy_rx and the data which produced by the last tx or rx may be wrongly sent to the device or handled by the upper level protocol. This patch just keep the orignal value of tx_buf/rx_buf if they are NULL after this transfer processed. Signed-off-by: Robin Gong Signed-off-by: Mark Brown diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index d5d7d22..50910d8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -583,6 +583,15 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg) rx_dev = master->dma_rx->device->dev; list_for_each_entry(xfer, &msg->transfers, transfer_list) { + /* + * Restore the original value of tx_buf or rx_buf if they are + * NULL. + */ + if (xfer->tx_buf == master->dummy_tx) + xfer->tx_buf = NULL; + if (xfer->rx_buf == master->dummy_rx) + xfer->rx_buf = NULL; + if (!master->can_dma(master, msg->spi, xfer)) continue; -- cgit v0.10.2 From 0ea001d3b43cc9d387c093ae205c4228cd88a886 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Wed, 15 Apr 2015 13:57:11 +0800 Subject: ARM: rockchip: disable dapswjdp during suspend Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is not "jtag_trstn". the AP would think this pin is always high, so it can not reset before resume. When system resume, but the dapswjdp is not in a default state, it may Access some illegal address, it cause system crash during resume. Let's disable this jtag function by clear the dapdeviceen bit, it prohibit the dapswjdp to access memory and registers. This bit would be enable in MASKROM, so we need clear it in suspend everytime. Signed-off-by: Chris Zhong Reviewed-by: Doug Anderson Signed-off-by: Heiko Stuebner diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index b07d886..b0dcbe2 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -83,6 +83,13 @@ static void rk3288_slp_mode_set(int level) SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); + /* + * The dapswjdp can not auto reset before resume, that cause it may + * access some illegal address during resume. Let's disable it before + * suspend, and the MASKROM will enable it back. + */ + regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE); + /* booting address of resuming system is from this register value */ regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, rk3288_bootram_phy); diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 03ff31d..3e8d39c 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -55,6 +55,10 @@ static inline void rockchip_suspend_init(void) #define SGRF_FAST_BOOT_EN BIT(8) #define SGRF_FAST_BOOT_EN_WRITE BIT(24) +#define RK3288_SGRF_CPU_CON0 (0x40) +#define SGRF_DAPDEVICEEN BIT(0) +#define SGRF_DAPDEVICEEN_WRITE BIT(16) + #define RK3288_CRU_MODE_CON 0x50 #define RK3288_CRU_SEL0_CON 0x60 #define RK3288_CRU_SEL1_CON 0x64 -- cgit v0.10.2 From b403125d3bbf8046c1186e1a49cb17bb5551db14 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Sun, 22 Mar 2015 00:04:51 +0800 Subject: ARM: rockchip: fix undefined instruction of reset_ctrl_regs Sometimes the debug module may not work well after resume, since it has not been correctly reset when wakeup from suspend. That cause system crash during reusme, and a 'undefined instruction' is displayed on the console. Set the GRF_FORCE_JTAG bit of RK3288_GRF_SOC_CON0 can ensure that debug modul is reset. And we can change the value of RK3288_GRF_SOC_CON0 back when system resume. Signed-off-by: Chris Zhong Tested-by: Caesar Wang Reviewed-by: Douglas Anderson According to discussions, there does not seem a better solution available. Please also see the potential security implication described in the comment inline in the code. Signed-off-by: Heiko Stuebner diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index b0dcbe2..22812fe 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base; static phys_addr_t rk3288_bootram_phy; static struct regmap *pmu_regmap; +static struct regmap *grf_regmap; static struct regmap *sgrf_regmap; static u32 rk3288_pmu_pwr_mode_con; +static u32 rk3288_grf_soc_con0; static u32 rk3288_sgrf_soc_con0; static inline u32 rk3288_l2_config(void) @@ -70,12 +72,26 @@ static void rk3288_slp_mode_set(int level) { u32 mode_set, mode_set1; + regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0); + regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); /* + * We need set this bit GRF_FORCE_JTAG here, for the debug module, + * otherwise, it may become inaccessible after resume. + * This creates a potential security issue, as the sdmmc pins may + * accept jtag data for a short time during resume if no card is + * inserted. + * But this is of course also true for the regular boot, before we + * turn of the jtag/sdmmc autodetect. + */ + regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG | + GRF_FORCE_JTAG_WRITE); + + /* * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR * PCLK_WDT_GATE - disable WDT during suspend. */ @@ -135,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void) regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); + + regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 | + GRF_FORCE_JTAG_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) @@ -193,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np) return PTR_ERR(pmu_regmap); } + grf_regmap = syscon_regmap_lookup_by_compatible( + "rockchip,rk3288-grf"); + if (IS_ERR(grf_regmap)) { + pr_err("%s: could not find grf regmap\n", __func__); + return PTR_ERR(pmu_regmap); + } + sram_np = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu-sram"); if (!sram_np) { diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 3e8d39c..f8a747b 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void) #define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44 #define RK3288_PMU_PWRMODE_CON1 0x90 +#define RK3288_GRF_SOC_CON0 0x244 +#define GRF_FORCE_JTAG BIT(12) +#define GRF_FORCE_JTAG_WRITE BIT(28) + #define RK3288_SGRF_SOC_CON0 (0x0000) #define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) #define SGRF_PCLK_WDT_GATE BIT(6) -- cgit v0.10.2 From 2a9fe3ca84afff6259820c4f62e579f41476becc Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 20 Jan 2015 23:47:30 +0100 Subject: rockchip: make sure timer7 is enabled on rk3288 platforms timer7 supplies the architected timer and thus as has to run when the system clocksource and clockevents drivers are registered. While it should be the responsibility of the bootloader to do this, and there exists a fix in a community u-boot, all u-boot based systems that actually shipped have the mentioned issue. Therefore to not require every developer to update their u-boot, add a snippet for this, enabling the timer early in the kernel. Signed-off-by: Heiko Stuebner diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d360ec0..b6cf3b4 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -30,11 +30,30 @@ #include "pm.h" #define RK3288_GRF_SOC_CON0 0x244 +#define RK3288_TIMER6_7_PHYS 0xff810000 static void __init rockchip_timer_init(void) { if (of_machine_is_compatible("rockchip,rk3288")) { struct regmap *grf; + void __iomem *reg_base; + + /* + * Most/all uboot versions for rk3288 don't enable timer7 + * which is needed for the architected timer to work. + * So make sure it is running during early boot. + */ + reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K); + if (reg_base) { + writel(0, reg_base + 0x30); + writel(0xffffffff, reg_base + 0x20); + writel(0xffffffff, reg_base + 0x24); + writel(1, reg_base + 0x30); + dsb(); + iounmap(reg_base); + } else { + pr_err("rockchip: could not map timer7 registers\n"); + } /* * Disable auto jtag/sdmmc switching that causes issues -- cgit v0.10.2 From c57dcb566d3d866a302a1da2e06344bec31d5bcd Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Thu, 2 Apr 2015 08:39:00 +0100 Subject: efivarfs: Ensure VariableName is NUL-terminated Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall Acked-by: Matthew Garrett Cc: Jeremy Kerr Cc: Signed-off-by: Matt Fleming diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c index ddbce42..acf9a67 100644 --- a/fs/efivarfs/super.c +++ b/fs/efivarfs/super.c @@ -121,7 +121,7 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor, int len, i; int err = -ENOMEM; - entry = kmalloc(sizeof(*entry), GFP_KERNEL); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); if (!entry) return err; -- cgit v0.10.2 From 98b228f55014870092c15d7d168fecac69f2f12a Mon Sep 17 00:00:00 2001 From: Roy Franz Date: Wed, 15 Apr 2015 16:32:24 -0700 Subject: x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz Cc: Signed-off-by: Matt Fleming diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 92b9a5f..5999980 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1110,6 +1110,8 @@ struct boot_params *make_boot_params(struct efi_config *c) if (!cmdline_ptr) goto fail; hdr->cmd_line_ptr = (unsigned long)cmdline_ptr; + /* Fill in upper bits of command line address, NOP on 32 bit */ + boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32; hdr->ramdisk_image = 0; hdr->ramdisk_size = 0; -- cgit v0.10.2 From 7d0ec8b6f40b356f780b79de63eeafd6b907d68c Mon Sep 17 00:00:00 2001 From: Pelle Nilsson Date: Tue, 14 Apr 2015 15:40:17 +0200 Subject: spi: bitbang: Make setup_transfer() callback optional Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b558a56 ("spi/bitbang: Drop empty setup() functions") Signed-off-by: Pelle Nilsson Reviewed-by: Ezequiel Garcia Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 5ef6638..840a498 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -180,7 +180,6 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; - int retval; unsigned long flags; bitbang = spi_master_get_devdata(spi->master); @@ -197,9 +196,11 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs->txrx_word) return -EINVAL; - retval = bitbang->setup_transfer(spi, NULL); - if (retval < 0) - return retval; + if (bitbang->setup_transfer) { + int retval = bitbang->setup_transfer(spi, NULL); + if (retval < 0) + return retval; + } dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); @@ -295,9 +296,11 @@ static int spi_bitbang_transfer_one(struct spi_master *master, /* init (-1) or override (1) transfer params */ if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; + if (bitbang->setup_transfer) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) + break; + } if (do_setup == -1) do_setup = 0; } -- cgit v0.10.2 From d44c3fe68cc7e435ebc06d5b6ac260a5c1b495f8 Mon Sep 17 00:00:00 2001 From: Avri Altman Date: Sat, 18 Apr 2015 22:16:42 +0300 Subject: iwlwifi: mvm: fix Tx Power firmware API The firmware doesn't relate the scan to a vif. The scan is run by a separate entity called auxiliary MAC (aka AUX MAC). This AUX MAC needs to get Tx power limitations that are not applied on a specific vif, but on the device as a whole. This can be implemented by using the minimum of all the values set by the user for all the MACs. But then we need to ignore the limitations that come from the AP or regulatory for a specific vif: a specific vif might have regulatory limitations because of the channel is works on. This limit is irrelevant for the AUX MAC. Use the new API from mac80211: the user_power_level in bss_conf to achieve this. Firmware -13.ucode has already moved to this API. Change-Id: Ifba83660f378e91b93bd46d29fe8ba35a7c168a4 Signed-off-by: Avri Altman Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index bfdf3fa..62db2e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -244,6 +244,7 @@ enum iwl_ucode_tlv_flag { * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR + * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, * regardless of the band or the number of the probes. FW will calculate * the actual dwell time. @@ -260,6 +261,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9), IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10), + IWL_UCODE_TLV_API_TX_POWER_DEV = BIT(11), IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13), IWL_UCODE_TLV_API_SCD_CFG = BIT(15), IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16), diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 4fc0938b..b1baa33 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -298,6 +298,40 @@ struct iwl_uapsd_misbehaving_ap_notif { } __packed; /** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @set_mode: 0 - MAC tx power, 1 - device tx power + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in 1/8 dBms. + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + */ +struct iwl_dev_tx_power_cmd { + __le32 set_mode; + __le32 mac_context_id; + __le16 pwr_restriction; + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; +} __packed; /* TX_REDUCED_POWER_API_S_VER_2 */ + +#define IWL_DEV_MAX_TX_POWER 0x7FFF + +/** * struct iwl_beacon_filter_cmd * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC contex identifier diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index aab68cb..01b1da6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -281,19 +281,6 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; -/** - * struct iwl_reduce_tx_power_cmd - TX power reduction command - * REDUCE_TX_POWER_CMD = 0x9f - * @flags: (reserved for future implementation) - * @mac_context_id: id of the mac ctx for which we are reducing TX power. - * @pwr_restriction: TX power restriction in dBms. - */ -struct iwl_reduce_tx_power_cmd { - u8 flags; - u8 mac_context_id; - __le16 pwr_restriction; -} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ - /* * Calibration control struct. * Sent as part of the phy configuration command. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 8455517..7c2d5ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1471,8 +1471,8 @@ static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm) return NULL; } -static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - s8 tx_power) +static int iwl_mvm_set_tx_power_old(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, s8 tx_power) { /* FW is in charge of regulatory enforcement */ struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = { @@ -1485,6 +1485,26 @@ static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, &reduce_txpwr_cmd); } +static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + s16 tx_power) +{ + struct iwl_dev_tx_power_cmd cmd = { + .set_mode = 0, + .mac_context_id = + cpu_to_le32(iwl_mvm_vif_from_mac80211(vif)->id), + .pwr_restriction = cpu_to_le16(8 * tx_power), + }; + + if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_TX_POWER_DEV)) + return iwl_mvm_set_tx_power_old(mvm, vif, tx_power); + + if (tx_power == IWL_DEFAULT_MAX_TX_POWER) + cmd.pwr_restriction = cpu_to_le16(IWL_DEV_MAX_TX_POWER); + + return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, + sizeof(cmd), &cmd); +} + static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { -- cgit v0.10.2 From 145d90b6b3a3f00d8b66d0e118b4995b64b74fef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 Apr 2015 12:05:48 +0300 Subject: iwlwifi: mvm: don't stop the FW monitor too early When the delay paramatere is provided, we need to stop the collection only after the delay has elapsed. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index bc5eac4..9c28fe7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -494,15 +494,6 @@ int iwl_mvm_fw_dbg_collect_desc(struct iwl_mvm *mvm, mvm->fw_dump_desc = desc; - /* stop recording */ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { - iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - } else { - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ - udelay(100); - } - queue_delayed_work(system_wq, &mvm->fw_dump_wk, delay); return 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index a08b03d..1c66297 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -865,6 +865,16 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) return; mutex_lock(&mvm->mutex); + + /* stop recording */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + } else { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(100); + } + iwl_mvm_fw_error_dump(mvm); /* start recording again if the firmware is not crashed */ -- cgit v0.10.2 From 1083fd7391e989be52022f0f338e9dadc048b063 Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Tue, 31 Mar 2015 16:14:41 +0300 Subject: iwlwifi: mvm: fix scan iteration complete notification handling Scan iteration complete notification handling uses the wrong FW API version (version 2 instead of version 3). Fix that by removing version 2 API which is no longer used, and using only the updated version. Signed-off-by: Avraham Stern Reviewed-by: David Spinadel Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 4f81dcf..d6cced4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -122,46 +122,6 @@ enum iwl_scan_complete_status { SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, }; -/** - * struct iwl_scan_results_notif - scan results for one channel - * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) - * @channel: which channel the results are from - * @band: 0 for 5.2 GHz, 1 for 2.4 GHz - * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request - * @num_probe_not_sent: # of request that weren't sent due to not enough time - * @duration: duration spent in channel, in usecs - * @statistics: statistics gathered for this channel - */ -struct iwl_scan_results_notif { - u8 channel; - u8 band; - u8 probe_status; - u8 num_probe_not_sent; - __le32 duration; - __le32 statistics[SCAN_RESULTS_STATISTICS]; -} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ - -/** - * struct iwl_scan_complete_notif - notifies end of scanning (all channels) - * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) - * @scanned_channels: number of channels scanned (and number of valid results) - * @status: one of SCAN_COMP_STATUS_* - * @bt_status: BT on/off status - * @last_channel: last channel that was scanned - * @tsf_low: TSF timer (lower half) in usecs - * @tsf_high: TSF timer (higher half) in usecs - * @results: array of scan results, only "scanned_channels" of them are valid - */ -struct iwl_scan_complete_notif { - u8 scanned_channels; - u8 status; - u8 bt_status; - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; - struct iwl_scan_results_notif results[]; -} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ - /* scan offload */ #define IWL_SCAN_MAX_BLACKLIST_LEN 64 #define IWL_SCAN_SHORT_BLACKLIST_LEN 16 @@ -554,7 +514,7 @@ struct iwl_scan_req_unified_lmac { } __packed; /** - * struct iwl_lmac_scan_results_notif - scan results for one channel - + * struct iwl_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz @@ -562,7 +522,7 @@ struct iwl_scan_req_unified_lmac { * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ -struct iwl_lmac_scan_results_notif { +struct iwl_scan_results_notif { u8 channel; u8 band; u8 probe_status; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 74e1c86..1075a21 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -319,7 +319,7 @@ int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm *mvm, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scan_complete_notif *notif = (void *)pkt->data; + struct iwl_lmac_scan_complete_notif *notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan offload iteration complete: status=0x%x scanned channels=%d\n", -- cgit v0.10.2 From 8047cc0c584844817fbf3bf57cb18c1f762a7136 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 26 Mar 2015 13:15:03 +0200 Subject: iwlwifi: mvm: Avoid signal based decisions if ave beacon RSSI is 0 If for some reason statistics notification received from the firmware reports 0 in average beacon RSSI value, then skip it and avoid signal based decisions. Signed-off-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 78ec7db..d6314dd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -478,6 +478,11 @@ static void iwl_mvm_stat_iterator(void *_data, u8 *mac, if (vif->type != NL80211_IFTYPE_STATION) return; + if (sig == 0) { + IWL_DEBUG_RX(mvm, "RSSI is 0 - skip signal based decision\n"); + return; + } + mvmvif->bf_data.ave_beacon_signal = sig; /* BT Coex */ -- cgit v0.10.2 From 625e03461ba51592ac785214b2254af7bd630077 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 20 Apr 2015 00:59:50 +0200 Subject: MAINTAINERS: add entry for Rockchip drm drivers Mark Yao looks after the Rockchip drm drivers and should thus also get patches touching these. Signed-off-by: Heiko Stuebner diff --git a/MAINTAINERS b/MAINTAINERS index 6520042..76dfb2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3398,6 +3398,13 @@ F: drivers/gpu/drm/rcar-du/ F: drivers/gpu/drm/shmobile/ F: include/linux/platform_data/shmob_drm.h +DRM DRIVERS FOR ROCKCHIP +M: Mark Yao +L: dri-devel@lists.freedesktop.org +S: Maintained +F: drivers/gpu/drm/rockchip/ +F: Documentation/devicetree/bindings/video/rockchip* + DSBR100 USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org -- cgit v0.10.2 From 3ea68922fc4148abc97557df43d4ba9a136b1c8d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 20 Apr 2015 01:00:53 +0200 Subject: drm/rockchip: fix error check when getting irq platform_get_irq() can return negative error values and we already test for these. Therefore the variable holding this value should be signed to not loose possible error values. Reported-by: David Binderman Signed-off-by: Heiko Stuebner Reviewed-By: Daniel Kurtz diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index ccb0ce0..4557f33 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1409,7 +1409,7 @@ static int vop_bind(struct device *dev, struct device *master, void *data) struct vop *vop; struct resource *res; size_t alloc_size; - int ret; + int ret, irq; of_id = of_match_device(vop_driver_dt_match, dev); vop_data = of_id->data; @@ -1445,11 +1445,12 @@ static int vop_bind(struct device *dev, struct device *master, void *data) return ret; } - vop->irq = platform_get_irq(pdev, 0); - if (vop->irq < 0) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { dev_err(dev, "cannot find irq for vop\n"); - return vop->irq; + return irq; } + vop->irq = (unsigned int)irq; spin_lock_init(&vop->reg_lock); spin_lock_init(&vop->irq_lock); -- cgit v0.10.2 From 553452e5ffc0ed13214a287549627d02d9d7fbdc Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Thu, 16 Apr 2015 17:21:12 +0300 Subject: iwlwifi: pcie: prevent using unmapped memory in fw monitor In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de8fbf..6debb0c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -5,8 +5,8 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2007 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,8 +31,8 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2005 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -104,7 +104,7 @@ static void iwl_pcie_free_fw_monitor(struct iwl_trans *trans) static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct page *page; + struct page *page = NULL; dma_addr_t phys; u32 size; u8 power; @@ -131,6 +131,7 @@ static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, phys)) { __free_pages(page, order); + page = NULL; continue; } IWL_INFO(trans, -- cgit v0.10.2 From 94d4b4765b7ddb8478b0d57663cf7a08e2263bbf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 23 Nov 2012 19:19:07 +0100 Subject: x86/mm: Clean up types in xlate_dev_mem_ptr() Pavel Machek reported the following compiler warning on x86/32 CONFIG_HIGHMEM64G=y builds: arch/x86/mm/ioremap.c:344:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Clean up the types in this function by using a single natural type for internal calculations (unsigned long), to make it more apparent what's happening, and also to remove fragile casts. Reported-by: Pavel Machek Cc: jgross@suse.com Cc: roland@purestorage.com Link: http://lkml.kernel.org/r/20150416080440.GA507@amd Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index fdf617c..4bf037b 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -332,18 +332,20 @@ EXPORT_SYMBOL(iounmap); */ void *xlate_dev_mem_ptr(phys_addr_t phys) { - void *addr; - unsigned long start = phys & PAGE_MASK; + unsigned long start = phys & PAGE_MASK; + unsigned long offset = phys & ~PAGE_MASK; + unsigned long vaddr; /* If page is RAM, we can use __va. Otherwise ioremap and unmap. */ if (page_is_ram(start >> PAGE_SHIFT)) return __va(phys); - addr = (void __force *)ioremap_cache(start, PAGE_SIZE); - if (addr) - addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK)); + vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE); + /* Only add the offset on success and return NULL if the ioremap() failed: */ + if (vaddr) + vaddr += offset; - return addr; + return (void *)vaddr; } void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr) -- cgit v0.10.2 From 5eb8f4d74204864d8a4154772206ad747274d12d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Apr 2015 14:56:51 +0200 Subject: mac80211: don't warn when stopping VLAN with stations Stations assigned to an AP_VLAN type interface are flushed when the interface is stopped, but then we warn about it. Suppress the warning since there's nothing else that would ensure those stations are already removed at this point. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index b4ac596..bab5c63 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -819,13 +819,15 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * (because if we remove a STA after ops->remove_interface() * the driver will have removed the vif info already!) * - * This is relevant only in WDS mode, in all other modes we've - * already removed all stations when disconnecting or similar, - * so warn otherwise. + * In WDS mode a station must exist here and be flushed, for + * AP_VLANs stations may exist since there's nothing else that + * would have removed them, but in other modes there shouldn't + * be any stations. */ flushed = sta_info_flush(sdata); - WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || - (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); + WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP_VLAN && + ((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || + (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1))); /* don't count this interface for promisc/allmulti while it is down */ if (sdata->flags & IEEE80211_SDATA_ALLMULTI) -- cgit v0.10.2 From e0e2674b92056c24c69940d5f405ea4aef5e4010 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 20 Apr 2015 14:41:05 +0100 Subject: ata: ahci_st: fixup layering violations / drvdata errors Brian noticed while working on another SATA driver that uses libahci_platform, an error in this driver; it tries to the the driver data for its device, while libata also thinks it can set the driver data. See: ahci_platform_init_host() -> ata_host_alloc_pinfo() -> ata_host_alloc() -> dev_set_drvdata() So instead of sticking the IP-specific platform data into drvdata, let's use the plat_data variable that is reserved for this use. Addtionally plat_data isn't set until ahci_platform_init_host() has been called further down in probe(). So re-work the st_ahci_probe_resets and st_ahci_deassert_resets functions to take ahci_host_priv *hpriv as a parameter. Signed-off-by: Peter Griffin Suggested-by: Brian Norris Cc: Srinivas Kandagatla Cc: Maxime Coquelin Cc: Patrice Chotard Signed-off-by: Tejun Heo diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index ea0ff00..8ff428f 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -37,7 +37,6 @@ struct st_ahci_drv_data { struct reset_control *pwr; struct reset_control *sw_rst; struct reset_control *pwr_rst; - struct ahci_host_priv *hpriv; }; static void st_ahci_configure_oob(void __iomem *mmio) @@ -55,9 +54,10 @@ static void st_ahci_configure_oob(void __iomem *mmio) writel(new_val, mmio + ST_AHCI_OOBR); } -static int st_ahci_deassert_resets(struct device *dev) +static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; if (drv_data->pwr) { @@ -90,8 +90,8 @@ static int st_ahci_deassert_resets(struct device *dev) static void st_ahci_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; struct device *dev = host->dev; - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); int err; if (drv_data->pwr) { @@ -103,29 +103,30 @@ static void st_ahci_host_stop(struct ata_host *host) ahci_platform_disable_resources(hpriv); } -static int st_ahci_probe_resets(struct platform_device *pdev) +static int st_ahci_probe_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; - drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn"); + drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn"); if (IS_ERR(drv_data->pwr)) { - dev_info(&pdev->dev, "power reset control not defined\n"); + dev_info(dev, "power reset control not defined\n"); drv_data->pwr = NULL; } - drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst"); + drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst"); if (IS_ERR(drv_data->sw_rst)) { - dev_info(&pdev->dev, "soft reset control not defined\n"); + dev_info(dev, "soft reset control not defined\n"); drv_data->sw_rst = NULL; } - drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst"); + drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst"); if (IS_ERR(drv_data->pwr_rst)) { - dev_dbg(&pdev->dev, "power soft reset control not defined\n"); + dev_dbg(dev, "power soft reset control not defined\n"); drv_data->pwr_rst = NULL; } - return st_ahci_deassert_resets(&pdev->dev); + return st_ahci_deassert_resets(hpriv, dev); } static struct ata_port_operations st_ahci_port_ops = { @@ -154,15 +155,12 @@ static int st_ahci_probe(struct platform_device *pdev) if (!drv_data) return -ENOMEM; - platform_set_drvdata(pdev, drv_data); - hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = drv_data; - drv_data->hpriv = hpriv; - - err = st_ahci_probe_resets(pdev); + err = st_ahci_probe_resets(hpriv, &pdev->dev); if (err) return err; @@ -170,7 +168,7 @@ static int st_ahci_probe(struct platform_device *pdev) if (err) return err; - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); @@ -185,8 +183,9 @@ static int st_ahci_probe(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int st_ahci_suspend(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; err = ahci_platform_suspend_host(dev); @@ -208,21 +207,21 @@ static int st_ahci_suspend(struct device *dev) static int st_ahci_resume(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; int err; err = ahci_platform_enable_resources(hpriv); if (err) return err; - err = st_ahci_deassert_resets(dev); + err = st_ahci_deassert_resets(hpriv, dev); if (err) { ahci_platform_disable_resources(hpriv); return err; } - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); return ahci_platform_resume_host(dev); } -- cgit v0.10.2 From 3b6e042188994466ec257b71296b5f85b894dcd9 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 21 Apr 2015 17:26:23 +0200 Subject: perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu The core_pmu does not define cpu_* callbacks, which handles allocation of 'struct cpu_hw_events::shared_regs' data, initialization of debug store and PMU_FL_EXCL_CNTRS counters. While this probably won't happen on bare metal, virtual CPU can define x86_pmu.extra_regs together with PMU version 1 and thus be using core_pmu -> using shared_regs data without it being allocated. That could could leave to following panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] _spin_lock_irqsave+0x1f/0x40 SNIP [] __intel_shared_reg_get_constraints+0x69/0x1e0 [] intel_get_event_constraints+0x9b/0x180 [] x86_schedule_events+0x75/0x1d0 [] ? check_preempt_curr+0x7c/0x90 [] ? try_to_wake_up+0x24e/0x3e0 [] ? default_wake_function+0x12/0x20 [] ? autoremove_wake_function+0x16/0x40 [] ? __wake_up_common+0x59/0x90 [] ? __d_lookup+0xa7/0x150 [] ? do_lookup+0x9f/0x230 [] ? dput+0x9a/0x150 [] ? path_to_nameidata+0x25/0x60 [] ? __link_path_walk+0x7da/0x1000 [] ? x86_pmu_add+0xb9/0x170 [] x86_pmu_commit_txn+0x67/0xc0 [] ? mntput_no_expire+0x30/0x110 [] ? path_put+0x31/0x40 [] ? current_fs_time+0x27/0x30 [] ? mem_cgroup_get_reclaim_stat_from_page+0x20/0x70 [] group_sched_in+0x13a/0x170 [] ? sched_clock+0x9/0x10 [] ctx_sched_in+0x2e8/0x330 [] perf_event_sched_in+0x6b/0xb0 [] perf_event_context_sched_in+0x76/0xc0 [] perf_event_comm+0x1bb/0x2e0 [] set_task_comm+0x69/0x80 [] setup_new_exec+0xe1/0x2e0 [] load_elf_binary+0x3ce/0x1ab0 Adding cpu_(prepare|starting|dying) for core_pmu to have shared_regs data allocated for core_pmu. AFAICS there's no harm to initialize debug store and PMU_FL_EXCL_CNTRS either for core_pmu. Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20150421152623.GC13169@krava.redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 219d3fb..960e85d 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config) return x86_event_sysfs_show(page, config, event); } -static __initconst const struct x86_pmu core_pmu = { - .name = "core", - .handle_irq = x86_pmu_handle_irq, - .disable_all = x86_pmu_disable_all, - .enable_all = core_pmu_enable_all, - .enable = core_pmu_enable_event, - .disable = x86_pmu_disable_event, - .hw_config = x86_pmu_hw_config, - .schedule_events = x86_schedule_events, - .eventsel = MSR_ARCH_PERFMON_EVENTSEL0, - .perfctr = MSR_ARCH_PERFMON_PERFCTR0, - .event_map = intel_pmu_event_map, - .max_events = ARRAY_SIZE(intel_perfmon_event_map), - .apic = 1, - /* - * Intel PMCs cannot be accessed sanely above 32 bit width, - * so we install an artificial 1<<31 period regardless of - * the generic event period: - */ - .max_period = (1ULL << 31) - 1, - .get_event_constraints = intel_get_event_constraints, - .put_event_constraints = intel_put_event_constraints, - .event_constraints = intel_core_event_constraints, - .guest_get_msrs = core_guest_get_msrs, - .format_attrs = intel_arch_formats_attr, - .events_sysfs_show = intel_event_sysfs_show, -}; - struct intel_shared_regs *allocate_shared_regs(int cpu) { struct intel_shared_regs *regs; @@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = { NULL, }; +static __initconst const struct x86_pmu core_pmu = { + .name = "core", + .handle_irq = x86_pmu_handle_irq, + .disable_all = x86_pmu_disable_all, + .enable_all = core_pmu_enable_all, + .enable = core_pmu_enable_event, + .disable = x86_pmu_disable_event, + .hw_config = x86_pmu_hw_config, + .schedule_events = x86_schedule_events, + .eventsel = MSR_ARCH_PERFMON_EVENTSEL0, + .perfctr = MSR_ARCH_PERFMON_PERFCTR0, + .event_map = intel_pmu_event_map, + .max_events = ARRAY_SIZE(intel_perfmon_event_map), + .apic = 1, + /* + * Intel PMCs cannot be accessed sanely above 32-bit width, + * so we install an artificial 1<<31 period regardless of + * the generic event period: + */ + .max_period = (1ULL<<31) - 1, + .get_event_constraints = intel_get_event_constraints, + .put_event_constraints = intel_put_event_constraints, + .event_constraints = intel_core_event_constraints, + .guest_get_msrs = core_guest_get_msrs, + .format_attrs = intel_arch_formats_attr, + .events_sysfs_show = intel_event_sysfs_show, + + /* + * Virtual (or funny metal) CPU can define x86_pmu.extra_regs + * together with PMU version 1 and thus be using core_pmu with + * shared_regs. We need following callbacks here to allocate + * it properly. + */ + .cpu_prepare = intel_pmu_cpu_prepare, + .cpu_starting = intel_pmu_cpu_starting, + .cpu_dying = intel_pmu_cpu_dying, +}; + static __initconst const struct x86_pmu intel_pmu = { .name = "Intel", .handle_irq = intel_pmu_handle_irq, -- cgit v0.10.2 From 80bcffb376a6890dd7452b12c1ba032f8f24fef6 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Mon, 20 Apr 2015 15:34:07 -0700 Subject: perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs This uncore is the same as the Haswell desktop part but uses a different PCI ID. Signed-off-by: Sonny Rao Cc: Arnaldo Carvalho de Melo Cc: Bjorn Helgaas Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429569247-16697-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c index 3001015..ca75e70 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c @@ -1,6 +1,9 @@ /* Nehalem/SandBridge/Haswell uncore support */ #include "perf_event_intel_uncore.h" +/* Uncore IMC PCI Id */ +#define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 + /* SNB event control */ #define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff #define SNB_UNC_CTL_UMASK_MASK 0x0000ff00 @@ -472,6 +475,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, { /* end: all zeroes */ }, }; @@ -502,6 +509,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = { IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver), /* 3rd Gen Core processor */ IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */ IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */ + IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */ { /* end marker */ } }; -- cgit v0.10.2 From 0140e6141e4f1d4b15fb469e6912b0e71b7d1cc2 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 21 Apr 2015 12:33:11 -0700 Subject: perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver This keeps all the related PCI IDs together in the driver where they are used. Signed-off-by: Sonny Rao Acked-by: Bjorn Helgaas Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429644791-25724-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c index ca75e70..4562e9e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c @@ -1,7 +1,11 @@ /* Nehalem/SandBridge/Haswell uncore support */ #include "perf_event_intel_uncore.h" -/* Uncore IMC PCI Id */ +/* Uncore IMC PCI IDs */ +#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 +#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 +#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 +#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 /* SNB event control */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e63c02a..a593858 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2539,10 +2539,6 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 -#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 -#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 -#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 -- cgit v0.10.2 From 575bec53181526ed01c0936ec008e1b70f8f5f31 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 22 Apr 2015 16:28:20 +0200 Subject: spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1 On CPM2, the SPI parameter RAM is dynamically allocated in the dualport RAM whereas in CPM1, it is statically allocated to a default address with capability to relocate it somewhere else via the use of CPM micropatch. The address of the parameter RAM is given by the boot loader and expected to be mapped via devm_ioremap_resource() In the current implementation, in function fsl_spi_cpm_get_pram() there is a confusion between the SPI_BASE register and the base of the SPI parameter RAM. Fortunatly, it is working properly with MPC866 and MPC885 because they do set SPI_BASE, but on MPC860 and other old MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set. Also, the parameter RAM is not properly mapped with devm_ioremap_resource() as it should but still gets accessible by chance through the full RAM which is mapped from somewhere else. This patch applies to the SPI driver the same principle as for the CPM UART: when the CPM is of type CPM1, we simply do an devm_ioremap_resource() of the area provided via the device tree. Signed-off-by: Christophe Leroy Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 9c46a30..6f466ab 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "spi-fsl-cpm.h" #include "spi-fsl-lib.h" @@ -269,17 +270,6 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) if (mspi->flags & SPI_CPM2) { pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); out_be16(spi_base, pram_ofs); - } else { - struct spi_pram __iomem *pram = spi_base; - u16 rpbase = in_be16(&pram->rpbase); - - /* Microcode relocation patch applied? */ - if (rpbase) { - pram_ofs = rpbase; - } else { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - out_be16(spi_base, pram_ofs); - } } iounmap(spi_base); @@ -292,7 +282,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) struct device_node *np = dev->of_node; const u32 *iprop; int size; - unsigned long pram_ofs; unsigned long bds_ofs; if (!(mspi->flags & SPI_CPM_MODE)) @@ -319,8 +308,21 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = fsl_spi_cpm_get_pram(mspi); - if (IS_ERR_VALUE(pram_ofs)) { + if (mspi->flags & SPI_CPM1) { + struct resource *res; + + res = platform_get_resource(to_platform_device(dev), + IORESOURCE_MEM, 1); + mspi->pram = devm_ioremap_resource(dev, res); + } else { + unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi); + + if (IS_ERR_VALUE(pram_ofs)) + mspi->pram = NULL; + else + mspi->pram = cpm_muram_addr(pram_ofs); + } + if (mspi->pram == NULL) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; } @@ -346,8 +348,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_rx; } - mspi->pram = cpm_muram_addr(pram_ofs); - mspi->tx_bd = cpm_muram_addr(bds_ofs); mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); @@ -375,7 +375,8 @@ err_dummy_rx: err_dummy_tx: cpm_muram_free(bds_ofs); err_bds: - cpm_muram_free(pram_ofs); + if (!(mspi->flags & SPI_CPM1)) + cpm_muram_free(cpm_muram_offset(mspi->pram)); err_pram: fsl_spi_free_dummy_rx(); return -ENOMEM; -- cgit v0.10.2 From 60f4b626d5b5c5724b010200a8c2ff3169f6f4db Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 14:02:30 +0200 Subject: mac80211: fix rhashtable conversion My conversion of the mac80211 station hash table to rhashtable completely broke the lookup in sta_info_get() as it no longer took into account the virtual interface. Fix that. Fixes: 7bedd0cfad4e1 ("mac80211: use rhashtable for station table") Signed-off-by: Johannes Berg diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 12971b7..3989317 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -157,8 +157,24 @@ struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, const u8 *addr) { struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + struct rhash_head *tmp; + const struct bucket_table *tbl; + + rcu_read_lock(); + tbl = rht_dereference_rcu(local->sta_hash.tbl, &local->sta_hash); - return rhashtable_lookup_fast(&local->sta_hash, addr, sta_rht_params); + for_each_sta_info(local, tbl, addr, sta, tmp) { + if (sta->sdata == sdata) { + rcu_read_unlock(); + /* this is safe as the caller must already hold + * another rcu read section or the mutex + */ + return sta; + } + } + rcu_read_unlock(); + return NULL; } /* -- cgit v0.10.2 From 9283b42e46c2646dff1bec47e2dd683add7f9972 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 23 Apr 2015 10:24:45 -0600 Subject: NVMe: Fix VPD B0 max sectors translation Use the namespace's block format for reporting the max transfer length. Max unmap count is left as-is since NVMe doesn't provide a max, so the value the driver provided the block layer is valid for any format. Reported-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index 6b736b0..88f13c5 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -944,7 +944,8 @@ static int nvme_trans_ext_inq_page(struct nvme_ns *ns, struct sg_io_hdr *hdr, static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr, u8 *inq_response, int alloc_len) { - __be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue)); + __be32 max_sectors = cpu_to_be32( + nvme_block_nr(ns, queue_max_hw_sectors(ns->queue))); __be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors); __be32 discard_desc_count = cpu_to_be32(0x100); -- cgit v0.10.2 From f054b56c951bf1731ba7314a4c7f1cc0b2977cc9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Apr 2015 10:00:19 +0800 Subject: blk-mq: fix race between timeout and CPU hotplug Firstly during CPU hotplug, even queue is freezed, timeout handler still may come and access hctx->tags, which may cause use after free, so this patch deactivates timeout handler inside CPU hotplug notifier. Secondly, tags can be shared by more than one queues, so we have to check if the hctx has been unmapped, otherwise still use-after-free on tags can be triggered. Cc: Reported-by: Dongsu Park Tested-by: Dongsu Park Signed-off-by: Ming Lei Signed-off-by: Jens Axboe diff --git a/block/blk-mq.c b/block/blk-mq.c index ade8a2d..1fccb98 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -677,8 +677,11 @@ static void blk_mq_rq_timer(unsigned long priv) data.next = blk_rq_timeout(round_jiffies_up(data.next)); mod_timer(&q->timeout, data.next); } else { - queue_for_each_hw_ctx(q, hctx, i) - blk_mq_tag_idle(hctx); + queue_for_each_hw_ctx(q, hctx, i) { + /* the hctx may be unmapped, so check it here */ + if (blk_mq_hw_queue_mapped(hctx)) + blk_mq_tag_idle(hctx); + } } } @@ -2090,9 +2093,16 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb, */ list_for_each_entry(q, &all_q_list, all_q_node) blk_mq_freeze_queue_start(q); - list_for_each_entry(q, &all_q_list, all_q_node) + list_for_each_entry(q, &all_q_list, all_q_node) { blk_mq_freeze_queue_wait(q); + /* + * timeout handler can't touch hw queue during the + * reinitialization + */ + del_timer_sync(&q->timeout); + } + list_for_each_entry(q, &all_q_list, all_q_node) blk_mq_queue_reinit(q); -- cgit v0.10.2 From 2a34c0872adf252f23a6fef2d051a169ac796cef Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Apr 2015 10:00:20 +0800 Subject: blk-mq: fix CPU hotplug handling hctx->tags has to be set as NULL in case that it is to be unmapped no matter if set->tags[hctx->queue_num] is NULL or not in blk_mq_map_swqueue() because shared tags can be freed already from another request queue. The same situation has to be considered during handling CPU online too. Unmapped hw queue can be remapped after CPU topo is changed, so we need to allocate tags for the hw queue in blk_mq_map_swqueue(). Then tags allocation for hw queue can be removed in hctx cpu online notifier, and it is reasonable to do that after mapping is updated. Cc: Reported-by: Dongsu Park Tested-by: Dongsu Park Signed-off-by: Ming Lei Signed-off-by: Jens Axboe diff --git a/block/blk-mq.c b/block/blk-mq.c index 1fccb98..76f460e 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1574,22 +1574,6 @@ static int blk_mq_hctx_cpu_offline(struct blk_mq_hw_ctx *hctx, int cpu) return NOTIFY_OK; } -static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu) -{ - struct request_queue *q = hctx->queue; - struct blk_mq_tag_set *set = q->tag_set; - - if (set->tags[hctx->queue_num]) - return NOTIFY_OK; - - set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num); - if (!set->tags[hctx->queue_num]) - return NOTIFY_STOP; - - hctx->tags = set->tags[hctx->queue_num]; - return NOTIFY_OK; -} - static int blk_mq_hctx_notify(void *data, unsigned long action, unsigned int cpu) { @@ -1597,8 +1581,11 @@ static int blk_mq_hctx_notify(void *data, unsigned long action, if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) return blk_mq_hctx_cpu_offline(hctx, cpu); - else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) - return blk_mq_hctx_cpu_online(hctx, cpu); + + /* + * In case of CPU online, tags may be reallocated + * in blk_mq_map_swqueue() after mapping is updated. + */ return NOTIFY_OK; } @@ -1778,6 +1765,7 @@ static void blk_mq_map_swqueue(struct request_queue *q) unsigned int i; struct blk_mq_hw_ctx *hctx; struct blk_mq_ctx *ctx; + struct blk_mq_tag_set *set = q->tag_set; queue_for_each_hw_ctx(q, hctx, i) { cpumask_clear(hctx->cpumask); @@ -1806,16 +1794,20 @@ static void blk_mq_map_swqueue(struct request_queue *q) * disable it and free the request entries. */ if (!hctx->nr_ctx) { - struct blk_mq_tag_set *set = q->tag_set; - if (set->tags[i]) { blk_mq_free_rq_map(set, set->tags[i], i); set->tags[i] = NULL; - hctx->tags = NULL; } + hctx->tags = NULL; continue; } + /* unmapped hw queue can be remapped after CPU topo changed */ + if (!set->tags[i]) + set->tags[i] = blk_mq_init_rq_map(set, i); + hctx->tags = set->tags[i]; + WARN_ON(!hctx->tags); + /* * Set the map size to the number of mapped software queues. * This is more accurate and more efficient than looping -- cgit v0.10.2 From 464d1387acb94dc43ba772b35242345e3d2ead1b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2015 16:49:13 -0400 Subject: writeback: use |1 instead of +1 to protect against div by zero mm/page-writeback.c has several places where 1 is added to the divisor to prevent division by zero exceptions; however, if the original divisor is equivalent to -1, adding 1 leads to division by zero. There are three places where +1 is used for this purpose - one in pos_ratio_polynom() and two in bdi_position_ratio(). The second one in bdi_position_ratio() actually triggered div-by-zero oops on a machine running a 3.10 kernel. The divisor is x_intercept - bdi_setpoint + 1 == span + 1 span is confirmed to be (u32)-1. It isn't clear how it ended up that but it could be from write bandwidth calculation underflow fixed by c72efb658f7c ("writeback: fix possible underflow in write bandwidth calculation"). At any rate, +1 isn't a proper protection against div-by-zero. This patch converts all +1 protections to |1. Note that bdi_update_dirty_ratelimit() was already using |1 before this patch. Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Reviewed-by: Jan Kara Signed-off-by: Jens Axboe diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 5daf556..eb59f7e 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -580,7 +580,7 @@ static long long pos_ratio_polynom(unsigned long setpoint, long x; x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT, - limit - setpoint + 1); + (limit - setpoint) | 1); pos_ratio = x; pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT; pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT; @@ -807,7 +807,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, * scale global setpoint to bdi's: * bdi_setpoint = setpoint * bdi_thresh / thresh */ - x = div_u64((u64)bdi_thresh << 16, thresh + 1); + x = div_u64((u64)bdi_thresh << 16, thresh | 1); bdi_setpoint = setpoint * (u64)x >> 16; /* * Use span=(8*write_bw) in single bdi case as indicated by @@ -822,7 +822,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, if (bdi_dirty < x_intercept - span / 4) { pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty), - x_intercept - bdi_setpoint + 1); + (x_intercept - bdi_setpoint) | 1); } else pos_ratio /= 4; -- cgit v0.10.2 From 8406a4d56ea94d1d91f62cab3bed15399bac73cb Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Thu, 23 Apr 2015 10:47:44 -0600 Subject: elevator: fix double release of elevator module Our issue is descripted in below call path: ->elevator_init ->elevator_init_fn ->{cfq,deadline,noop}_init_queue ->elevator_alloc ->kzalloc_node fail to call kzalloc_node and then put module in elevator_alloc; fail to call elevator_init_fn and then put module again in elevator_init. Remove elevator_put invoking in error path of elevator_alloc to avoid double release issue. Signed-off-by: Chao Yu Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/elevator.c b/block/elevator.c index 59794d0..8985038 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -157,7 +157,7 @@ struct elevator_queue *elevator_alloc(struct request_queue *q, eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node); if (unlikely(!eq)) - goto err; + return NULL; eq->type = e; kobject_init(&eq->kobj, &elv_ktype); @@ -165,10 +165,6 @@ struct elevator_queue *elevator_alloc(struct request_queue *q, hash_init(eq->hash); return eq; -err: - kfree(eq); - elevator_put(e); - return NULL; } EXPORT_SYMBOL(elevator_alloc); -- cgit v0.10.2 From cb24d01d217497fb32467de22d773655f47d3896 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 22 Apr 2015 10:04:23 -0300 Subject: perf trace: Enable events when doing system wide tracing and starting a workload commit f7aa222ff397 Author: Arnaldo Carvalho de Melo Date: Tue Feb 3 13:25:39 2015 -0300 perf trace: No need to enable evsels for workload started from perf The assumption was that whenever a workload is specified, the attr.enable_on_exec evsel flag would be set, but that is not happening when perf_record_opts.system_wide is set, for instance That resulted in both perf_evlist__enable() and attr.enable_on_exec being not called/set, which made the events to remain disabled while the workload runs, producing no output. Fix it, by calling perf_evlist__enable() in the 'trace' tool when forking and not targetting a workload started from trace v2: Test against !target__none(), as suggested by Namhyung Kim, that is what is used in perf_evsel__config() when deciding if the attr.enable_on_exec flag to be set. More work is needed to cover other cases such as opts->initial_delay. Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-27z7169pvfxgj8upic636syv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index e124741..8842218 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2241,10 +2241,11 @@ static int trace__run(struct trace *trace, int argc, const char **argv) if (err < 0) goto out_error_mmap; + if (!target__none(&trace->opts.target)) + perf_evlist__enable(evlist); + if (forks) perf_evlist__start_workload(evlist); - else - perf_evlist__enable(evlist); trace->multiple_threads = evlist->threads->map[0] == -1 || evlist->threads->nr > 1 || -- cgit v0.10.2 From 02ac5421ddc634767c732f9b6a10a395a9ecfc4f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 22 Apr 2015 11:11:57 -0300 Subject: perf trace: Disable events and drain events when forked workload ends We were not checking in the inner event processing loop if the forked workload had finished, which, on a busy system, may make it take a long time trying to drain events, entering a seemingly neverending loop, waiting for the system to get idle enough to make it drain the buffers. Fix it by disabling the events when 'done' is true, in the inner loop, to start draining what is in the buffers. Now: [root@ssdandy ~]# time trace --filter-pids 14003 -a sleep 1 | tail 996.748 ( 0.002 ms): sh/30296 rt_sigprocmask(how: SETMASK, nset: 0x7ffc83418160, sigsetsize: 8) = 0 996.751 ( 0.002 ms): sh/30296 rt_sigprocmask(how: BLOCK, nset: 0x7ffc834181f0, oset: 0x7ffc83418270, sigsetsize: 8) = 0 996.755 ( 0.002 ms): sh/30296 rt_sigaction(sig: INT, act: 0x7ffc83417f50, oact: 0x7ffc83417ff0, sigsetsize: 8) = 0 1004.543 ( 0.362 ms): tail/30198 ... [continued]: read()) = 4096 1004.548 ( 7.791 ms): sh/30296 wait4(upid: -1, stat_addr: 0x7ffc834181a0) ... 1004.975 ( 0.427 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1005.390 ( 0.410 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1005.743 ( 0.348 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1006.197 ( 0.449 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1006.492 ( 0.290 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 real 0m1.219s user 0m0.704s sys 0m0.331s [root@ssdandy ~]# Reported-by: Michael Petlan Suggested-by: Jiri Olsa Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-p6kpn1b26qcbe47pufpw0tex@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 8842218..e122970 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2273,6 +2273,11 @@ next_event: if (interrupted) goto out_disable; + + if (done && !draining) { + perf_evlist__disable(evlist); + draining = true; + } } } -- cgit v0.10.2 From 6145c259cd454bcb7a1288f7bbb7b4fbc18175dd Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 23 Apr 2015 14:40:37 +0100 Subject: perf kmem: Consistently use PRIu64 for printing u64 values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the perf tool for 32-bit ARM results in the following build error due to a combination of an incorrect conversion specifier and compiling with -Werror: builtin-kmem.c: In function ‘print_page_summary’: builtin-kmem.c:644:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] nr_alloc_freed, (total_alloc_freed_bytes) / 1024); ^ builtin-kmem.c:647:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); ^ cc1: all warnings being treated as errors This patch fixes the problem by consistently using PRIu64 for printing out u64 values. Signed-off-by: Will Deacon Cc: David Ahern Cc: Jiri Olsa Cc: Joonsoo Kim Cc: Minchan Kim Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1429796437-1790-1-git-send-email-will.deacon@arm.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 63ea013..a1915b4 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -640,9 +640,9 @@ static void print_page_summary(void) nr_page_frees, total_page_free_bytes / 1024); printf("\n"); - printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests", + printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests", nr_alloc_freed, (total_alloc_freed_bytes) / 1024); - printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc-only requests", + printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc-only requests", nr_page_allocs - nr_alloc_freed, (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total free-only requests", -- cgit v0.10.2 From de28c15daf60e9625bece22f13a091fac8d05f1d Mon Sep 17 00:00:00 2001 From: Bobby Powers Date: Tue, 21 Apr 2015 19:19:41 -0400 Subject: tools lib api: Undefine _FORTIFY_SOURCE before setting it Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the built-in, default args. This causes perf builds to fail with: :0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] : note: this is the location of the previous definition cc1: all warnings being treated as errors To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it in tools/lib/api. v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1. Signed-off-by: Bobby Powers Acked-by: Jiri Olsa Cc: Dirk Gouders Cc: Michal Marek Cc: Paul Mackerras Cc: Peter Zijlstra Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429658381-3039-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/lib/api/Makefile b/tools/lib/api/Makefile index d8fe29f..8bd9606 100644 --- a/tools/lib/api/Makefile +++ b/tools/lib/api/Makefile @@ -16,7 +16,7 @@ MAKEFLAGS += --no-print-directory LIBFILE = $(OUTPUT)libapi.a CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) -CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -D_FORTIFY_SOURCE=2 -fPIC +CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fPIC CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 RM = rm -f -- cgit v0.10.2 From caf22d311a35d1c0c2c73e1f0988276d51175c8f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Apr 2015 11:10:10 +0200 Subject: mac80211: enable hash table shrinking The hashtable behaviour change was merged into the tree at about the same time as the mac80211 use of rhashtable, but of course these don't really conflict in the normal sense. Enable hash table shrinking now. Signed-off-by: Johannes Berg diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 3989317..2880f2a 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -66,6 +66,7 @@ static const struct rhashtable_params sta_rht_params = { .nelem_hint = 3, /* start small */ + .automatic_shrinking = true, .head_offset = offsetof(struct sta_info, hash_node), .key_offset = offsetof(struct sta_info, sta.addr), .key_len = ETH_ALEN, -- cgit v0.10.2 From c5a06e75f38376238db6a38240bac4b27dfe5216 Mon Sep 17 00:00:00 2001 From: Fionn Cleary Date: Thu, 23 Apr 2015 21:13:40 +0200 Subject: spi/omap2-mcpsi: Always call spi_finalize_current_message() The spi queue waits forever for spi_finalize_current_message() to be called, blocking the bus. Ensure that all error paths from omap2_mcspi_transfer_one_message() call spi_finalize_current_message(). Signed-off-by: Fionn Cleary Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 4df8942..d1a5b9f 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1210,6 +1210,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; struct spi_transfer *t; + int status; spi = m->spi; mcspi = spi_master_get_devdata(master); @@ -1229,7 +1230,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, tx_buf ? "tx" : "", rx_buf ? "rx" : "", t->bits_per_word); - return -EINVAL; + status = -EINVAL; + goto out; } if (m->is_dma_mapped || len < DMA_MIN_BYTES) @@ -1241,7 +1243,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (dma_mapping_error(mcspi->dev, t->tx_dma)) { dev_dbg(mcspi->dev, "dma %cX %d bytes error\n", 'T', len); - return -EINVAL; + status = -EINVAL; + goto out; } } if (mcspi_dma->dma_rx && rx_buf != NULL) { @@ -1253,14 +1256,19 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, if (tx_buf != NULL) dma_unmap_single(mcspi->dev, t->tx_dma, len, DMA_TO_DEVICE); - return -EINVAL; + status = -EINVAL; + goto out; } } } omap2_mcspi_work(mcspi, m); + /* spi_finalize_current_message() changes the status inside the + * spi_message, save the status here. */ + status = m->status; +out: spi_finalize_current_message(master); - return 0; + return status; } static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) -- cgit v0.10.2 From 50574dd2f63ed0afc3b666da27eb7062d26a39c5 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Fri, 24 Apr 2015 18:41:17 +0800 Subject: spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence LS1021A chip also has the DSPI module. Add it to the dependence. Signed-off-by: Haikun Wang Signed-off-by: Mark Brown diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbe..d63719c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -303,7 +303,7 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO - depends on SOC_VF610 || COMPILE_TEST + depends on SOC_VF610 || SOC_LS1021A || COMPILE_TEST help This enables support for the Freescale DSPI controller in master mode. VF610 platform uses the controller. -- cgit v0.10.2 From 73ee39a4c944a11cfd6d43ba1f634da340bf5537 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 23 Apr 2015 14:11:47 +0200 Subject: spi: fsl-spi: fix devm_ioremap_resource() error case devm_ioremap_resource() doesn't return NULL but an ERR_PTR on error. Reported-by: Jonas Gorsky Signed-off-by: Christophe Leroy Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 6f466ab..896add8 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -310,10 +310,15 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) if (mspi->flags & SPI_CPM1) { struct resource *res; + void *pram; res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 1); - mspi->pram = devm_ioremap_resource(dev, res); + pram = devm_ioremap_resource(dev, res); + if (IS_ERR(pram)) + mspi->pram = NULL; + else + mspi->pram = pram; } else { unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi); -- cgit v0.10.2 From 4ad1f4300e3bddf63109aa63cfb2d37e8585ecc7 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 14 Apr 2015 13:49:33 -0400 Subject: perf kmem: Fix compiles on RHEL6/OL6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 0d68bc92c48 breaks compiles on RHEL6/OL6: cc1: warnings being treated as errors builtin-kmem.c: In function ‘search_page_alloc_stat’: builtin-kmem.c:322: error: declaration of ‘stat’ shadows a global declaration node = &parent->rb_left; /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_alloc_event’: builtin-kmem.c:378: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_free_event’: builtin-kmem.c:431: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here Rename local variable to pstat to avoid the name conflict. Signed-off-by: David Ahern Link: http://lkml.kernel.org/r/1429033773-31383-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index a1915b4..1634186 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -319,7 +319,7 @@ static int page_stat_cmp(struct page_stat *a, struct page_stat *b) return 0; } -static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool create) +static struct page_stat *search_page_alloc_stat(struct page_stat *pstat, bool create) { struct rb_node **node = &page_alloc_tree.rb_node; struct rb_node *parent = NULL; @@ -331,7 +331,7 @@ static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool cre parent = *node; data = rb_entry(*node, struct page_stat, node); - cmp = page_stat_cmp(data, stat); + cmp = page_stat_cmp(data, pstat); if (cmp < 0) node = &parent->rb_left; else if (cmp > 0) @@ -345,10 +345,10 @@ static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool cre data = zalloc(sizeof(*data)); if (data != NULL) { - data->page = stat->page; - data->order = stat->order; - data->gfp_flags = stat->gfp_flags; - data->migrate_type = stat->migrate_type; + data->page = pstat->page; + data->order = pstat->order; + data->gfp_flags = pstat->gfp_flags; + data->migrate_type = pstat->migrate_type; rb_link_node(&data->node, parent, node); rb_insert_color(&data->node, &page_alloc_tree); @@ -375,7 +375,7 @@ static int perf_evsel__process_page_alloc_event(struct perf_evsel *evsel, unsigned int migrate_type = perf_evsel__intval(evsel, sample, "migratetype"); u64 bytes = kmem_page_size << order; - struct page_stat *stat; + struct page_stat *pstat; struct page_stat this = { .order = order, .gfp_flags = gfp_flags, @@ -401,21 +401,21 @@ static int perf_evsel__process_page_alloc_event(struct perf_evsel *evsel, * This is to find the current page (with correct gfp flags and * migrate type) at free event. */ - stat = search_page(page, true); - if (stat == NULL) + pstat = search_page(page, true); + if (pstat == NULL) return -ENOMEM; - stat->order = order; - stat->gfp_flags = gfp_flags; - stat->migrate_type = migrate_type; + pstat->order = order; + pstat->gfp_flags = gfp_flags; + pstat->migrate_type = migrate_type; this.page = page; - stat = search_page_alloc_stat(&this, true); - if (stat == NULL) + pstat = search_page_alloc_stat(&this, true); + if (pstat == NULL) return -ENOMEM; - stat->nr_alloc++; - stat->alloc_bytes += bytes; + pstat->nr_alloc++; + pstat->alloc_bytes += bytes; order_stats[order][migrate_type]++; @@ -428,7 +428,7 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, u64 page; unsigned int order = perf_evsel__intval(evsel, sample, "order"); u64 bytes = kmem_page_size << order; - struct page_stat *stat; + struct page_stat *pstat; struct page_stat this = { .order = order, }; @@ -441,8 +441,8 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, nr_page_frees++; total_page_free_bytes += bytes; - stat = search_page(page, false); - if (stat == NULL) { + pstat = search_page(page, false); + if (pstat == NULL) { pr_debug2("missing free at page %"PRIx64" (order: %d)\n", page, order); @@ -453,18 +453,18 @@ static int perf_evsel__process_page_free_event(struct perf_evsel *evsel, } this.page = page; - this.gfp_flags = stat->gfp_flags; - this.migrate_type = stat->migrate_type; + this.gfp_flags = pstat->gfp_flags; + this.migrate_type = pstat->migrate_type; - rb_erase(&stat->node, &page_tree); - free(stat); + rb_erase(&pstat->node, &page_tree); + free(pstat); - stat = search_page_alloc_stat(&this, false); - if (stat == NULL) + pstat = search_page_alloc_stat(&this, false); + if (pstat == NULL) return -ENOENT; - stat->nr_free++; - stat->free_bytes += bytes; + pstat->nr_free++; + pstat->free_bytes += bytes; return 0; } -- cgit v0.10.2 From 410ceb8f2f1d4edeb02d229ef192e76602005b8b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 24 Apr 2015 10:45:16 +0900 Subject: tools lib traceevent: Fix build failure on 32-bit arch In my i386 build, it failed like this: CC event-parse.o event-parse.c: In function 'print_str_arg': event-parse.c:3868:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat] Signed-off-by: Namhyung Kim Acked-by: Javi Merino Link: http://lkml.kernel.org/r/20150424020218.GF1905@sejong Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 12a7e2a..aa21bd5 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -3865,7 +3865,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, } else if (el_size == 4) { trace_seq_printf(s, "%u", *(uint32_t *)num); } else if (el_size == 8) { - trace_seq_printf(s, "%lu", *(uint64_t *)num); + trace_seq_printf(s, "%"PRIu64, *(uint64_t *)num); } else { trace_seq_printf(s, "BAD SIZE:%d 0x%x", el_size, *(uint8_t *)num); -- cgit v0.10.2 From 10a50f1ab5f06c9a3ee5ece3ec52e607ed53c79f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 15 Apr 2015 11:14:11 +0300 Subject: genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip Without this system suspend is broken on systems that have drivers calling enable/disable_irq_wake() for interrupts based off the dummy irq hook. (e.g. drivers/gpio/gpio-pcf857x.c) Signed-off-by: Roger Quadros Cc: Cc: Cc: Cc: Gregory Clement Link: http://lkml.kernel.org/r/552E1DD3.4040106@ti.com Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/dummychip.c b/kernel/irq/dummychip.c index 988dc58..2feb6fe 100644 --- a/kernel/irq/dummychip.c +++ b/kernel/irq/dummychip.c @@ -57,5 +57,6 @@ struct irq_chip dummy_irq_chip = { .irq_ack = noop, .irq_mask = noop, .irq_unmask = noop, + .flags = IRQCHIP_SKIP_SET_WAKE, }; EXPORT_SYMBOL_GPL(dummy_irq_chip); -- cgit v0.10.2 From 1dcc73d7bb0429994c54d33b40c5fb82b741a791 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 22 Apr 2015 18:20:04 +0100 Subject: irqchip: gic: Drop support for gic_arch_extn Now that the users of gic_arch_extn have been fixed, drop the "feature" for good. This leads to the removal of some now useless locking. Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Signed-off-by: Thomas Gleixner diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index a6ce347..dd98914 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -80,19 +80,6 @@ static DEFINE_RAW_SPINLOCK(irq_controller_lock); #define NR_GIC_CPU_IF 8 static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; -/* - * Supported arch specific GIC irq extension. - * Default make them NULL. - */ -struct irq_chip gic_arch_extn = { - .irq_eoi = NULL, - .irq_mask = NULL, - .irq_unmask = NULL, - .irq_retrigger = NULL, - .irq_set_type = NULL, - .irq_set_wake = NULL, -}; - #ifndef MAX_GIC_NR #define MAX_GIC_NR 1 #endif @@ -165,34 +152,16 @@ static int gic_peek_irq(struct irq_data *d, u32 offset) static void gic_mask_irq(struct irq_data *d) { - unsigned long flags; - - raw_spin_lock_irqsave(&irq_controller_lock, flags); gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR); - if (gic_arch_extn.irq_mask) - gic_arch_extn.irq_mask(d); - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); } static void gic_unmask_irq(struct irq_data *d) { - unsigned long flags; - - raw_spin_lock_irqsave(&irq_controller_lock, flags); - if (gic_arch_extn.irq_unmask) - gic_arch_extn.irq_unmask(d); gic_poke_irq(d, GIC_DIST_ENABLE_SET); - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); } static void gic_eoi_irq(struct irq_data *d) { - if (gic_arch_extn.irq_eoi) { - raw_spin_lock(&irq_controller_lock); - gic_arch_extn.irq_eoi(d); - raw_spin_unlock(&irq_controller_lock); - } - writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); } @@ -249,8 +218,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type) { void __iomem *base = gic_dist_base(d); unsigned int gicirq = gic_irq(d); - unsigned long flags; - int ret; /* Interrupt configuration for SGIs can't be changed */ if (gicirq < 16) @@ -261,25 +228,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) type != IRQ_TYPE_EDGE_RISING) return -EINVAL; - raw_spin_lock_irqsave(&irq_controller_lock, flags); - - if (gic_arch_extn.irq_set_type) - gic_arch_extn.irq_set_type(d, type); - - ret = gic_configure_irq(gicirq, type, base, NULL); - - raw_spin_unlock_irqrestore(&irq_controller_lock, flags); - - return ret; -} - -static int gic_retrigger(struct irq_data *d) -{ - if (gic_arch_extn.irq_retrigger) - return gic_arch_extn.irq_retrigger(d); - - /* the genirq layer expects 0 if we can't retrigger in hardware */ - return 0; + return gic_configure_irq(gicirq, type, base, NULL); } #ifdef CONFIG_SMP @@ -310,21 +259,6 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, } #endif -#ifdef CONFIG_PM -static int gic_set_wake(struct irq_data *d, unsigned int on) -{ - int ret = -ENXIO; - - if (gic_arch_extn.irq_set_wake) - ret = gic_arch_extn.irq_set_wake(d, on); - - return ret; -} - -#else -#define gic_set_wake NULL -#endif - static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) { u32 irqstat, irqnr; @@ -383,11 +317,9 @@ static struct irq_chip gic_chip = { .irq_unmask = gic_unmask_irq, .irq_eoi = gic_eoi_irq, .irq_set_type = gic_set_type, - .irq_retrigger = gic_retrigger, #ifdef CONFIG_SMP .irq_set_affinity = gic_set_affinity, #endif - .irq_set_wake = gic_set_wake, .irq_get_irqchip_state = gic_irq_get_irqchip_state, .irq_set_irqchip_state = gic_irq_set_irqchip_state, }; @@ -1053,7 +985,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, set_handle_irq(gic_handle_irq); } - gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); gic_cpu_init(gic); gic_pm_init(gic); diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index 36ec4ae..9de976b 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -95,8 +95,6 @@ struct device_node; -extern struct irq_chip gic_arch_extn; - void gic_set_irqchip_flags(unsigned long flags); void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset, struct device_node *); -- cgit v0.10.2 From 149aabcc44e3e2c1f8fe4f0832be53d2db55b598 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 10 Apr 2015 12:56:41 +0530 Subject: clockevents: Shutdown detached clockevent device A clockevent device is marked DETACHED when it is replaced by another clockevent device. The device is shutdown properly for drivers that implement legacy ->set_mode() callback, as we call ->set_mode() for CLOCK_EVT_MODE_UNUSED as well. But for the new per-state callback interface, we skip shutting down the device, as we thought its an internal state change. That wasn't correct. The effect is that the device is left programmed in oneshot or periodic mode. Fall-back to 'case CLOCK_EVT_STATE_SHUTDOWN', to shutdown the device. Fixes: bd624d75db21 "clockevents: Introduce mode specific callbacks" Reported-by: Daniel Lezcano Signed-off-by: Viresh Kumar Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/eef0a91c51b74d4e52c8e5a95eca27b5a0563f07.1428650683.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 25d942d..629be4e 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -117,11 +117,7 @@ static int __clockevents_set_state(struct clock_event_device *dev, /* Transition with new state-specific callbacks */ switch (state) { case CLOCK_EVT_STATE_DETACHED: - /* - * This is an internal state, which is guaranteed to go from - * SHUTDOWN to DETACHED. No driver interaction required. - */ - return 0; + /* The clockevent device is getting replaced. Shut it down. */ case CLOCK_EVT_STATE_SHUTDOWN: return dev->set_state_shutdown(dev); -- cgit v0.10.2 From 2000058e892cd6773b3061a56c0bd6535ac15afe Mon Sep 17 00:00:00 2001 From: Jonatas Rech Date: Wed, 15 Apr 2015 12:23:18 -0300 Subject: spi: fsl-espi: fix behaviour for full-duplex xfers This patch makes possible for protocol drivers to do full-duplex SPI transfers properly. Until now this driver could only be used for half-duplex transfers, since it always expected an spi_transfer with non-null tx_buf to be only used for TX, and those with non-null rx_buf to be only used for RX. The fix consists in correcting the fsl_espi_transfer length by taking into consideration duplex spi_transfers, and not just by adding n_tx and n_rx. Furthermore, this correction has exposed an inconsistency in the protocol driver <-> controller driver interaction. The spi-fsl-espi driver artificially inserts TX bytes when message fragmentation is necessary (due to SPCOM_TRANLEN_MAX) instead of informing the protocol driver of the hardware limitation. This was tested with the m25p80 NOR flash protocol driver. Since fixing this issue may cause other client drivers to malfunction, it was left as is. Signed-off-by: Jonatas Rech Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index d0a73a0..80d245a 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -359,14 +359,16 @@ static void fsl_espi_rw_trans(struct spi_message *m, struct fsl_espi_transfer *trans, u8 *rx_buff) { struct fsl_espi_transfer *espi_trans = trans; - unsigned int n_tx = espi_trans->n_tx; - unsigned int n_rx = espi_trans->n_rx; + unsigned int total_len = espi_trans->len; struct spi_transfer *t; u8 *local_buf; u8 *rx_buf = rx_buff; unsigned int trans_len; unsigned int addr; - int i, pos, loop; + unsigned int tx_only; + unsigned int rx_pos = 0; + unsigned int pos; + int i, loop; local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); if (!local_buf) { @@ -374,36 +376,48 @@ static void fsl_espi_rw_trans(struct spi_message *m, return; } - for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { - trans_len = n_rx - pos; - if (trans_len > SPCOM_TRANLEN_MAX - n_tx) - trans_len = SPCOM_TRANLEN_MAX - n_tx; + for (pos = 0, loop = 0; pos < total_len; pos += trans_len, loop++) { + trans_len = total_len - pos; i = 0; + tx_only = 0; list_for_each_entry(t, &m->transfers, transfer_list) { if (t->tx_buf) { memcpy(local_buf + i, t->tx_buf, t->len); i += t->len; + if (!t->rx_buf) + tx_only += t->len; } } + /* Add additional TX bytes to compensate SPCOM_TRANLEN_MAX */ + if (loop > 0) + trans_len += tx_only; + + if (trans_len > SPCOM_TRANLEN_MAX) + trans_len = SPCOM_TRANLEN_MAX; + + /* Update device offset */ if (pos > 0) { addr = fsl_espi_cmd2addr(local_buf); - addr += pos; + addr += rx_pos; fsl_espi_addr2cmd(addr, local_buf); } - espi_trans->n_tx = n_tx; - espi_trans->n_rx = trans_len; - espi_trans->len = trans_len + n_tx; + espi_trans->len = trans_len; espi_trans->tx_buf = local_buf; espi_trans->rx_buf = local_buf; fsl_espi_do_trans(m, espi_trans); - memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + /* If there is at least one RX byte then copy it to rx_buf */ + if (tx_only < SPCOM_TRANLEN_MAX) + memcpy(rx_buf + rx_pos, espi_trans->rx_buf + tx_only, + trans_len - tx_only); + + rx_pos += trans_len - tx_only; if (loop > 0) - espi_trans->actual_length += espi_trans->len - n_tx; + espi_trans->actual_length += espi_trans->len - tx_only; else espi_trans->actual_length += espi_trans->len; } @@ -418,6 +432,7 @@ static int fsl_espi_do_one_msg(struct spi_master *master, u8 *rx_buf = NULL; unsigned int n_tx = 0; unsigned int n_rx = 0; + unsigned int xfer_len = 0; struct fsl_espi_transfer espi_trans; list_for_each_entry(t, &m->transfers, transfer_list) { @@ -427,11 +442,13 @@ static int fsl_espi_do_one_msg(struct spi_master *master, n_rx += t->len; rx_buf = t->rx_buf; } + if ((t->tx_buf) || (t->rx_buf)) + xfer_len += t->len; } espi_trans.n_tx = n_tx; espi_trans.n_rx = n_rx; - espi_trans.len = n_tx + n_rx; + espi_trans.len = xfer_len; espi_trans.actual_length = 0; espi_trans.status = 0; -- cgit v0.10.2 From 8393b811f38acdf7fd8da2028708edad3e68ce1f Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:36 +0200 Subject: libata: Add helper to determine when PHY events should be ignored This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 61a9c07..287c4ba 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1707,8 +1707,7 @@ static void ahci_handle_port_interrupt(struct ata_port *ap, if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* if LPM is enabled, PHYRDY doesn't mean anything */ - if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { + if (sata_lpm_ignore_phy_events(&ap->link)) { status &= ~PORT_IRQ_PHYRDY; ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f6cb1f1..12adcf7 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6752,6 +6752,25 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, return tmp; } +/** + * sata_lpm_ignore_phy_events - test if PHY event should be ignored + * @link: Link receiving the event + * + * Test whether the received PHY event has to be ignored or not. + * + * LOCKING: + * None: + * + * RETURNS: + * True if the event has to be ignored. + */ +bool sata_lpm_ignore_phy_events(struct ata_link *link) +{ + /* if LPM is enabled, PHYRDY doesn't mean anything */ + return !!(link->lpm_policy > ATA_LPM_MAX_POWER); +} +EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); + /* * Dummy port_ops */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 8dad4a3..6138d87 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1201,6 +1201,7 @@ extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q); +extern bool sata_lpm_ignore_phy_events(struct ata_link *link); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); -- cgit v0.10.2 From 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:37 +0200 Subject: libata: Ignore spurious PHY event on LPM policy change When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 12adcf7..85e6599 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6766,8 +6766,21 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, */ bool sata_lpm_ignore_phy_events(struct ata_link *link) { + unsigned long lpm_timeout = link->last_lpm_change + + msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); + /* if LPM is enabled, PHYRDY doesn't mean anything */ - return !!(link->lpm_policy > ATA_LPM_MAX_POWER); + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return true; + + /* ignore the first PHY event after the LPM policy changed + * as it is might be spurious + */ + if ((link->flags & ATA_LFLAG_CHANGED) && + time_before(jiffies, lpm_timeout)) + return true; + + return false; } EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 07f41be..cf0022e 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3597,6 +3597,9 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, } } + link->last_lpm_change = jiffies; + link->flags |= ATA_LFLAG_CHANGED; + return 0; fail: diff --git a/include/linux/libata.h b/include/linux/libata.h index 6138d87..28aeae4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -205,6 +205,7 @@ enum { ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */ + ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -309,6 +310,12 @@ enum { */ ATA_TMOUT_PMP_SRST_WAIT = 5000, + /* When the LPM policy is set to ATA_LPM_MAX_POWER, there might + * be a spurious PHY event, so ignore the first PHY event that + * occurs within 10s after the policy change. + */ + ATA_TMOUT_SPURIOUS_PHY = 10000, + /* ATA bus states */ BUS_UNKNOWN = 0, BUS_DMA = 1, @@ -788,6 +795,8 @@ struct ata_link { struct ata_eh_context eh_context; struct ata_device device[ATA_MAX_DEVICES]; + + unsigned long last_lpm_change; /* when last LPM change happened */ }; #define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) #define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) -- cgit v0.10.2 From 8ad31bf45db1c4a8f400cbc10400ce9fc0bed227 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 26 Apr 2015 11:53:54 +0200 Subject: dmaengine: usb-dmac: Protect PM-only functions to kill warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_PM=n: drivers/dma/sh/usb-dmac.c:677: warning: ‘usb_dmac_runtime_suspend’ defined but not used drivers/dma/sh/usb-dmac.c:688: warning: ‘usb_dmac_runtime_resume’ defined but not used Protect the unused functions by #ifdef CONFIG_PM to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Vinod Koul diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index f705798..ebd8a5f 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -673,6 +673,7 @@ static struct dma_chan *usb_dmac_of_xlate(struct of_phandle_args *dma_spec, * Power management */ +#ifdef CONFIG_PM static int usb_dmac_runtime_suspend(struct device *dev) { struct usb_dmac *dmac = dev_get_drvdata(dev); @@ -690,6 +691,7 @@ static int usb_dmac_runtime_resume(struct device *dev) return usb_dmac_init(dmac); } +#endif /* CONFIG_PM */ static const struct dev_pm_ops usb_dmac_pm = { SET_RUNTIME_PM_OPS(usb_dmac_runtime_suspend, usb_dmac_runtime_resume, -- cgit v0.10.2 From 801661467fd50832191c81665d061ffabcc1c5de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 26 Apr 2015 12:52:02 +0200 Subject: dmaengine: xgene: Set hardware dependency The xgene-dma driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Rameshwar Prasad Sahu Cc: Loc Ho Cc: Vinod Koul Signed-off-by: Vinod Koul diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index fd7ac13..bda2cb0 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -437,6 +437,7 @@ config IMG_MDC_DMA config XGENE_DMA tristate "APM X-Gene DMA support" + depends on ARCH_XGENE || COMPILE_TEST select DMA_ENGINE select DMA_ENGINE_RAID select ASYNC_TX_ENABLE_CHANNEL_SWITCH -- cgit v0.10.2 From 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:31 +0200 Subject: ARM: ux500: Move GPIO regulator for SD-card into board DTSs The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but instead it's specific to the board. Move the definition of it, into the board DTSs. Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index bfd3f1c..2201cd5 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1017,23 +1017,6 @@ status = "disabled"; }; - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - enable-active-high; - - states = <1800000 0x1 - 2900000 0x0>; - - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */ diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index bf8f0ed..8cf499a 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -111,6 +111,23 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 206826a..65a7f63 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -146,8 +146,23 @@ }; vmmci: regulator-gpio { + compatible = "regulator-gpio"; + gpios = <&gpio7 4 0x4>; enable-gpio = <&gpio6 25 0x4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; }; // External Micro SD slot -- cgit v0.10.2 From f9a8c3914ba85f19c3360b19612d77c47adb8942 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:32 +0200 Subject: ARM: ux500: Enable GPIO regulator for SD-card for HREF boards Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 8cf499a..744c1e3 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -124,8 +124,6 @@ states = <1800000 0x1 2900000 0x0>; - - status = "disabled"; }; // External Micro SD slot -- cgit v0.10.2 From 11133db7a836b0cb411faa048f07a38e994d1382 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 20 Apr 2015 16:02:33 +0200 Subject: ARM: ux500: Enable GPIO regulator for SD-card for snowball Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 65a7f63..1bc84eb 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -161,8 +161,6 @@ states = <1800000 0x1 2900000 0x0>; - - status = "disabled"; }; // External Micro SD slot -- cgit v0.10.2 From 750e30d4076ae5e02ad13a376e96c95a2627742c Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 14 Apr 2015 11:50:13 +0200 Subject: ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC There is no crystal connected to the internal RTC on the Open Block AX3. So let's disable it in order to prevent the kernel probing the driver uselessly. Eventually this patches removes the following warning message from the boot log: "rtc-mv d0010300.rtc: internal RTC not ticking" Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT Cc: # v3.8 + diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e3b08fb..990e8a2 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -105,6 +105,10 @@ }; internal-regs { + rtc@10300 { + /* No crystal connected to the internal RTC */ + status = "disabled"; + }; serial@12000 { status = "okay"; }; -- cgit v0.10.2 From 325d73bf8fea8af2227240b7305253fb052d3a68 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 3 Apr 2015 14:42:58 +0800 Subject: xen/blkback: safely unmap purge persistent grants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c43cf3ea8385 ("xen-blkback: safely unmap grants in case they are still in use") use gnttab_unmap_refs_async() to wait until the mapped pages are no longer in use before unmapping them, but that commit missed the persistent case. Purge persistent pages can't be unmapped either unless no longer in use. Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Signed-off-by: David Vrabel diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index bd2b3bb..48e98f2 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -329,8 +329,18 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST]; struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST]; struct persistent_gnt *persistent_gnt; - int ret, segs_to_unmap = 0; + int segs_to_unmap = 0; struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work); + struct gntab_unmap_queue_data unmap_data; + struct completion unmap_completion; + + init_completion(&unmap_completion); + + unmap_data.data = &unmap_completion; + unmap_data.done = &free_persistent_gnts_unmap_callback; + unmap_data.pages = pages; + unmap_data.unmap_ops = unmap; + unmap_data.kunmap_ops = NULL; while(!list_empty(&blkif->persistent_purge_list)) { persistent_gnt = list_first_entry(&blkif->persistent_purge_list, @@ -346,17 +356,19 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) pages[segs_to_unmap] = persistent_gnt->page; if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) { - ret = gnttab_unmap_refs(unmap, NULL, pages, - segs_to_unmap); - BUG_ON(ret); + unmap_data.count = segs_to_unmap; + gnttab_unmap_refs_async(&unmap_data); + wait_for_completion(&unmap_completion); + put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; } kfree(persistent_gnt); } if (segs_to_unmap > 0) { - ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap); - BUG_ON(ret); + unmap_data.count = segs_to_unmap; + gnttab_unmap_refs_async(&unmap_data); + wait_for_completion(&unmap_completion); put_free_pages(blkif, pages, segs_to_unmap); } } -- cgit v0.10.2 From b44166cd46e28dd608d5baa5873047a40f32919c Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 3 Apr 2015 14:42:59 +0800 Subject: xen/grant: introduce func gnttab_unmap_refs_sync() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are several place using gnttab async unmap and wait for completion, so move the common code to a function gnttab_unmap_refs_sync(). Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David Vrabel diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 48e98f2..713fc9f 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -265,17 +265,6 @@ static void put_persistent_gnt(struct xen_blkif *blkif, atomic_dec(&blkif->persistent_gnt_in_use); } -static void free_persistent_gnts_unmap_callback(int result, - struct gntab_unmap_queue_data *data) -{ - struct completion *c = data->data; - - /* BUG_ON used to reproduce existing behaviour, - but is this the best way to deal with this? */ - BUG_ON(result); - complete(c); -} - static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, unsigned int num) { @@ -285,12 +274,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, struct rb_node *n; int segs_to_unmap = 0; struct gntab_unmap_queue_data unmap_data; - struct completion unmap_completion; - - init_completion(&unmap_completion); - unmap_data.data = &unmap_completion; - unmap_data.done = &free_persistent_gnts_unmap_callback; unmap_data.pages = pages; unmap_data.unmap_ops = unmap; unmap_data.kunmap_ops = NULL; @@ -310,8 +294,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root, !rb_next(&persistent_gnt->node)) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; @@ -332,12 +315,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) int segs_to_unmap = 0; struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work); struct gntab_unmap_queue_data unmap_data; - struct completion unmap_completion; - init_completion(&unmap_completion); - - unmap_data.data = &unmap_completion; - unmap_data.done = &free_persistent_gnts_unmap_callback; unmap_data.pages = pages; unmap_data.unmap_ops = unmap; unmap_data.kunmap_ops = NULL; @@ -357,9 +335,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); - + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); segs_to_unmap = 0; } @@ -367,8 +343,7 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work) } if (segs_to_unmap > 0) { unmap_data.count = segs_to_unmap; - gnttab_unmap_refs_async(&unmap_data); - wait_for_completion(&unmap_completion); + BUG_ON(gnttab_unmap_refs_sync(&unmap_data)); put_free_pages(blkif, pages, segs_to_unmap); } } diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index d5bb1a3..8927485 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -327,30 +327,10 @@ static int map_grant_pages(struct grant_map *map) return err; } -struct unmap_grant_pages_callback_data -{ - struct completion completion; - int result; -}; - -static void unmap_grant_callback(int result, - struct gntab_unmap_queue_data *data) -{ - struct unmap_grant_pages_callback_data* d = data->data; - - d->result = result; - complete(&d->completion); -} - static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) { int i, err = 0; struct gntab_unmap_queue_data unmap_data; - struct unmap_grant_pages_callback_data data; - - init_completion(&data.completion); - unmap_data.data = &data; - unmap_data.done= &unmap_grant_callback; if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) { int pgno = (map->notify.addr >> PAGE_SHIFT); @@ -367,11 +347,9 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) unmap_data.pages = map->pages + offset; unmap_data.count = pages; - gnttab_unmap_refs_async(&unmap_data); - - wait_for_completion(&data.completion); - if (data.result) - return data.result; + err = gnttab_unmap_refs_sync(&unmap_data); + if (err) + return err; for (i = 0; i < pages; i++) { if (map->unmap_ops[offset+i].status) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 17972fb..b1c7170 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -123,6 +123,11 @@ struct gnttab_ops { int (*query_foreign_access)(grant_ref_t ref); }; +struct unmap_refs_callback_data { + struct completion completion; + int result; +}; + static struct gnttab_ops *gnttab_interface; static int grant_table_version; @@ -863,6 +868,29 @@ void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item) } EXPORT_SYMBOL_GPL(gnttab_unmap_refs_async); +static void unmap_refs_callback(int result, + struct gntab_unmap_queue_data *data) +{ + struct unmap_refs_callback_data *d = data->data; + + d->result = result; + complete(&d->completion); +} + +int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item) +{ + struct unmap_refs_callback_data data; + + init_completion(&data.completion); + item->data = &data; + item->done = &unmap_refs_callback; + gnttab_unmap_refs_async(item); + wait_for_completion(&data.completion); + + return data.result; +} +EXPORT_SYMBOL_GPL(gnttab_unmap_refs_sync); + static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) { int rc; diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 143ca5f..4478f4b 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -191,6 +191,7 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, struct gnttab_unmap_grant_ref *kunmap_ops, struct page **pages, unsigned int count); void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item); +int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item); /* Perform a batch of grant map/copy operations. Retry every batch slot -- cgit v0.10.2 From cfe8c59762244251fd9a5e281d48808095ff4090 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 14 Apr 2015 11:05:04 -0300 Subject: ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO On imx23-olinuxino the LED turns on when level logic high is aplied to GPIO2_1. Fix the gpios property accordingly. Fixes: b34aa1850244 ("ARM: dts: imx23-olinuxino: Remove unneeded "default-on"") Reported-by: Stefan Wahren Signed-off-by: Fabio Estevam Tested-by: Stefan Wahren Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7e6eef2..839a3b9 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,6 +12,7 @@ */ /dts-v1/; +#include #include "imx23.dtsi" / { @@ -122,7 +123,7 @@ user { label = "green"; - gpios = <&gpio2 1 1>; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; }; }; -- cgit v0.10.2 From 0fdebe1a2f4d3a8fc03754022fabf8ba95e131a3 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Tue, 14 Apr 2015 20:37:26 +0000 Subject: ARM: dts: imx23-olinuxino: Fix dr_mode of usb0 The dr_mode of usb0 on imx233-olinuxino is left to default "otg". Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the same pin as USB_OTG_ID it's possible to disable USB host by LED toggling: echo 0 > /sys/class/leds/green/brightness [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1 [ 1068.890000] usb usb1: USB disconnect, device number 1 [ 1068.920000] usb 1-1: USB disconnect, device number 2 [ 1068.920000] usb 1-1.1: USB disconnect, device number 3 [ 1069.070000] usb 1-1.2: USB disconnect, device number 4 [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 This patch fixes the issue by setting dr_mode to "host" in the dts file. Reported-by: Harald Geyer Signed-off-by: Stefan Wahren Reviewed-by: Fabio Estevam Reviewed-by: Marek Vasut Acked-by: Peter Chen Fixes: b49312948285 ("ARM: dts: imx23-olinuxino: Add USB host support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 839a3b9..8204539 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -94,6 +94,7 @@ ahb@80080000 { usb0: usb@80080000 { + dr_mode = "host"; vbus-supply = <®_usb0_vbus>; status = "okay"; }; -- cgit v0.10.2 From 61b8c7b58450846b63b35e90866d2eb4fde44834 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 20 Apr 2015 15:51:38 +0200 Subject: ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer Signed-off-by: Wolfram Sang Acked-by: Robert Schwebel Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index fb8d4a2..a5edd7d 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Pengutronix, Wolfram Sang + * Copyright (C) 2010 Pengutronix, Wolfram Sang * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License version 2 as published by the -- cgit v0.10.2 From a4811622fea15fdc78102069f573061fc87f3570 Mon Sep 17 00:00:00 2001 From: Qipeng Zha Date: Fri, 10 Apr 2015 06:25:10 +0800 Subject: gpiolib: change gpio pin from unsigned to signed in acpi callback The signed error will be wrongly used as valid gpio offset Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Qipeng Zha Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index d2303d5..725d161 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -550,7 +550,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address, length = min(agpio->pin_table_length, (u16)(pin_index + bits)); for (i = pin_index; i < length; ++i) { - unsigned pin = agpio->pin_table[i]; + int pin = agpio->pin_table[i]; struct acpi_gpio_connection *conn; struct gpio_desc *desc; bool found; -- cgit v0.10.2 From a526973e0291b245aefe12023a7f775f3c0e59a2 Mon Sep 17 00:00:00 2001 From: Andrew Andrianov Date: Sat, 11 Apr 2015 23:29:19 +0300 Subject: pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio) Signed-off-by: Andrew Andrianov Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c index 42f930f..03aa58c 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-370.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c @@ -364,7 +364,7 @@ static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = { MPP_FUNCTION(0x5, "audio", "mclk"), MPP_FUNCTION(0x6, "uart0", "cts")), MPP_MODE(63, - MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x0, "gpio", NULL), MPP_FUNCTION(0x1, "spi0", "sck"), MPP_FUNCTION(0x2, "tclk", NULL)), MPP_MODE(64, -- cgit v0.10.2 From dc391502fdbf97a9cabdc58ba8c915175383f681 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 17 Apr 2015 17:50:49 +0300 Subject: pinctrl: qcom-spmi: Fix pin direction configuration Pin direction configuration was incorrectly overwritten by output and function values in set_mux(). Fix this. Signed-off-by: Ivan T. Ivanov Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index b2d2221..de684ca 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -260,6 +260,7 @@ static int pmic_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned function, val = 1; } + val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT; val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT; diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 8f36c5f..890df16 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -370,6 +370,7 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, } } + val = val << PMIC_MPP_REG_MODE_DIR_SHIFT; val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK; -- cgit v0.10.2 From b421ed15d2c3039eb724680e4de1e4b2bd196a9a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 16 Apr 2015 11:17:27 +0900 Subject: drm/radeon: Use drm_calloc_ab for CS relocs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The number of relocs is passed in by userspace and can be large. It has been observed to cause kcalloc failures in the wild. Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 4d0f96c..ab39b85 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -88,7 +88,7 @@ static int radeon_cs_parser_relocs(struct radeon_cs_parser *p) p->dma_reloc_idx = 0; /* FIXME: we assume that each relocs use 4 dwords */ p->nrelocs = chunk->length_dw / 4; - p->relocs = kcalloc(p->nrelocs, sizeof(struct radeon_bo_list), GFP_KERNEL); + p->relocs = drm_calloc_large(p->nrelocs, sizeof(struct radeon_bo_list)); if (p->relocs == NULL) { return -ENOMEM; } @@ -428,7 +428,7 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error, bo } } kfree(parser->track); - kfree(parser->relocs); + drm_free_large(parser->relocs); drm_free_large(parser->vm_bos); for (i = 0; i < parser->nchunks; i++) drm_free_large(parser->chunks[i].kdata); -- cgit v0.10.2 From 304f07e9c8d302cf3183248cbabb40598eb5b732 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Mar 2015 10:33:05 -0400 Subject: drm/radeon: fix ordering of AVI packet setup Set the line first, then enable the stream. May fix pink line problems on some displays. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index c18d4ec..2379979 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -219,13 +219,13 @@ void evergreen_set_avi_packet(struct radeon_device *rdev, u32 offset, WREG32(AFMT_AVI_INFO3 + offset, frame[0xC] | (frame[0xD] << 8) | (buffer[1] << 24)); - WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset, - HDMI_AVI_INFO_SEND | /* enable AVI info frames */ - HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */ - WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset, - HDMI_AVI_INFO_LINE(2), /* anything other than 0 */ - ~HDMI_AVI_INFO_LINE_MASK); + HDMI_AVI_INFO_LINE(2), /* anything other than 0 */ + ~HDMI_AVI_INFO_LINE_MASK); + + WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset, + HDMI_AVI_INFO_SEND | /* enable AVI info frames */ + HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */ } void dce4_hdmi_audio_set_dto(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index dd6606b..e85894a 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -228,12 +228,13 @@ void r600_set_avi_packet(struct radeon_device *rdev, u32 offset, WREG32(HDMI0_AVI_INFO3 + offset, frame[0xC] | (frame[0xD] << 8) | (buffer[1] << 24)); + WREG32_OR(HDMI0_INFOFRAME_CONTROL1 + offset, + HDMI0_AVI_INFO_LINE(2)); /* anything other than 0 */ + WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset, - HDMI0_AVI_INFO_SEND | /* enable AVI info frames */ - HDMI0_AVI_INFO_CONT); /* send AVI info frames every frame/field */ + HDMI0_AVI_INFO_SEND | /* enable AVI info frames */ + HDMI0_AVI_INFO_CONT); /* send AVI info frames every frame/field */ - WREG32_OR(HDMI0_INFOFRAME_CONTROL1 + offset, - HDMI0_AVI_INFO_LINE(2)); /* anything other than 0 */ } /* -- cgit v0.10.2 From 12428327bbd1180b5d8ef83fdf9482b878d0502a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Mar 2015 11:38:48 -0400 Subject: drm/radeon: drop dce6_dp_enable It's mostly duplicated with evergreen_dp_enable. This is a prerequisite for fix implemented in another patch. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index 3adc2af..68fd9fc 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -295,28 +295,3 @@ void dce6_dp_audio_set_dto(struct radeon_device *rdev, WREG32(DCCG_AUDIO_DTO1_MODULE, clock); } } - -void dce6_dp_enable(struct drm_encoder *encoder, bool enable) -{ - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - - if (!dig || !dig->afmt) - return; - - if (enable) { - WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset, - EVERGREEN_DP_SEC_TIMESTAMP_MODE(1)); - WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, - EVERGREEN_DP_SEC_ASP_ENABLE | /* Audio packet transmission */ - EVERGREEN_DP_SEC_ATP_ENABLE | /* Audio timestamp packet transmission */ - EVERGREEN_DP_SEC_AIP_ENABLE | /* Audio infoframe packet transmission */ - EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */ - } else { - WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0); - } - - dig->afmt->enabled = enable; -} diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 2379979..7264ccd 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -437,7 +437,7 @@ void evergreen_dp_enable(struct drm_encoder *encoder, bool enable) WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset, EVERGREEN_DP_SEC_TIMESTAMP_MODE(1)); - if (radeon_connector->con_priv) { + if (!ASIC_IS_DCE6(rdev) && radeon_connector->con_priv) { dig_connector = radeon_connector->con_priv; val = RREG32(EVERGREEN_DP_SEC_AUD_N + dig->afmt->offset); val &= ~EVERGREEN_DP_SEC_N_BASE_MULTIPLE(0xf); diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 48d49e6..2c17df9 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -102,7 +102,6 @@ static void radeon_audio_dp_mode_set(struct drm_encoder *encoder, void r600_hdmi_enable(struct drm_encoder *encoder, bool enable); void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable); void evergreen_dp_enable(struct drm_encoder *encoder, bool enable); -void dce6_dp_enable(struct drm_encoder *encoder, bool enable); static const u32 pin_offsets[7] = { @@ -240,7 +239,7 @@ static struct radeon_audio_funcs dce6_dp_funcs = { .set_avi_packet = evergreen_set_avi_packet, .set_audio_packet = dce4_set_audio_packet, .mode_set = radeon_audio_dp_mode_set, - .dpms = dce6_dp_enable, + .dpms = evergreen_dp_enable, }; static void radeon_audio_interface_init(struct radeon_device *rdev) -- cgit v0.10.2 From 362ff251390f3d1f8fe94666f4fc4e5876381114 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Mar 2015 11:43:12 -0400 Subject: drm/radeon/audio: don't enable packets until the end Don't enable the audio and avi infoframes and audio stream until all the state is set up. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 7264ccd..9e1cd0c 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -222,10 +222,6 @@ void evergreen_set_avi_packet(struct radeon_device *rdev, u32 offset, WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset, HDMI_AVI_INFO_LINE(2), /* anything other than 0 */ ~HDMI_AVI_INFO_LINE_MASK); - - WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset, - HDMI_AVI_INFO_SEND | /* enable AVI info frames */ - HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */ } void dce4_hdmi_audio_set_dto(struct radeon_device *rdev, @@ -370,9 +366,13 @@ void dce4_set_audio_packet(struct drm_encoder *encoder, u32 offset) WREG32(AFMT_AUDIO_PACKET_CONTROL2 + offset, AFMT_AUDIO_CHANNEL_ENABLE(0xff)); + WREG32(HDMI_AUDIO_PACKET_CONTROL + offset, + HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */ + HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */ + /* allow 60958 channel status and send audio packets fields to be updated */ - WREG32(AFMT_AUDIO_PACKET_CONTROL + offset, - AFMT_AUDIO_SAMPLE_SEND | AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE); + WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + offset, + AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE); } @@ -398,17 +398,16 @@ void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable) return; if (enable) { - WREG32(HDMI_INFOFRAME_CONTROL1 + dig->afmt->offset, - HDMI_AUDIO_INFO_LINE(2)); /* anything other than 0 */ - - WREG32(HDMI_AUDIO_PACKET_CONTROL + dig->afmt->offset, - HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */ - HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */ - WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, + HDMI_AVI_INFO_SEND | /* enable AVI info frames */ + HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */ HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */ HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */ + WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + AFMT_AUDIO_SAMPLE_SEND); } else { + WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + ~AFMT_AUDIO_SAMPLE_SEND); WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, 0); } @@ -434,6 +433,9 @@ void evergreen_dp_enable(struct drm_encoder *encoder, bool enable) struct radeon_connector_atom_dig *dig_connector; uint32_t val; + WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + AFMT_AUDIO_SAMPLE_SEND); + WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset, EVERGREEN_DP_SEC_TIMESTAMP_MODE(1)); @@ -457,6 +459,8 @@ void evergreen_dp_enable(struct drm_encoder *encoder, bool enable) EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */ } else { WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0); + WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + ~AFMT_AUDIO_SAMPLE_SEND); } dig->afmt->enabled = enable; -- cgit v0.10.2 From 0f55db36d49d45b80eff0c0a2a498766016f458b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 7 Apr 2015 09:52:42 -0400 Subject: drm/radeon: only mark audio as connected if the monitor supports it (v3) Otherwise the driver may try and send audio which may confuse the monitor. v2: set pin to NULL if no audio v3: avoid crash with analog encoders Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 2c17df9..8b82abb 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -460,30 +460,33 @@ void radeon_audio_detect(struct drm_connector *connector, if (!connector || !connector->encoder) return; + if (!radeon_encoder_is_digital(connector->encoder)) + return; + rdev = connector->encoder->dev->dev_private; radeon_encoder = to_radeon_encoder(connector->encoder); dig = radeon_encoder->enc_priv; - if (status == connector_status_connected) { - struct radeon_connector *radeon_connector; - int sink_type; - - if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) { - radeon_encoder->audio = NULL; - return; - } + if (!dig->afmt) + return; - radeon_connector = to_radeon_connector(connector); - sink_type = radeon_dp_getsinktype(radeon_connector); + if (status == connector_status_connected) { + struct radeon_connector *radeon_connector = to_radeon_connector(connector); if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort && - sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) + radeon_dp_getsinktype(radeon_connector) == + CONNECTOR_OBJECT_ID_DISPLAYPORT) radeon_encoder->audio = rdev->audio.dp_funcs; else radeon_encoder->audio = rdev->audio.hdmi_funcs; dig->afmt->pin = radeon_audio_get_pin(connector->encoder); - radeon_audio_enable(rdev, dig->afmt->pin, 0xf); + if (drm_detect_monitor_audio(radeon_connector_edid(connector))) { + radeon_audio_enable(rdev, dig->afmt->pin, 0xf); + } else { + radeon_audio_enable(rdev, dig->afmt->pin, 0); + dig->afmt->pin = NULL; + } } else { radeon_audio_enable(rdev, dig->afmt->pin, 0); dig->afmt->pin = NULL; diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index cebb65e..d17d251 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1379,8 +1379,10 @@ out: /* updated in get modes as well since we need to know if it's analog or digital */ radeon_connector_update_scratch_regs(connector, ret); - if (radeon_audio != 0) + if (radeon_audio != 0) { + radeon_connector_get_edid(connector); radeon_audio_detect(connector, ret); + } exit: pm_runtime_mark_last_busy(connector->dev->dev); @@ -1717,8 +1719,10 @@ radeon_dp_detect(struct drm_connector *connector, bool force) radeon_connector_update_scratch_regs(connector, ret); - if (radeon_audio != 0) + if (radeon_audio != 0) { + radeon_connector_get_edid(connector); radeon_audio_detect(connector, ret); + } out: pm_runtime_mark_last_busy(connector->dev->dev); -- cgit v0.10.2 From 38aef1549b18539eaecd804383a6ccb6588a9ce1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 7 Apr 2015 10:20:49 -0400 Subject: drm/radeon: only enable audio streams if the monitor supports it Selectively enable which packets we send based on monitor caps. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index f57c1ab..dd39f43 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1761,17 +1761,15 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); int encoder_mode = atombios_get_encoder_mode(encoder); DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n", radeon_encoder->encoder_id, mode, radeon_encoder->devices, radeon_encoder->active_device); - if (connector && (radeon_audio != 0) && + if ((radeon_audio != 0) && ((encoder_mode == ATOM_ENCODER_MODE_HDMI) || - (ENCODER_MODE_IS_DP(encoder_mode) && - drm_detect_monitor_audio(radeon_connector_edid(connector))))) + ENCODER_MODE_IS_DP(encoder_mode))) radeon_audio_dpms(encoder, mode); switch (radeon_encoder->encoder_id) { diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 9e1cd0c..0926739 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -398,13 +398,23 @@ void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable) return; if (enable) { - WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, - HDMI_AVI_INFO_SEND | /* enable AVI info frames */ - HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */ - HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */ - HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */ - WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, - AFMT_AUDIO_SAMPLE_SEND); + struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); + + if (drm_detect_monitor_audio(radeon_connector_edid(connector))) { + WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, + HDMI_AVI_INFO_SEND | /* enable AVI info frames */ + HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */ + HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */ + HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */ + WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + AFMT_AUDIO_SAMPLE_SEND); + } else { + WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, + HDMI_AVI_INFO_SEND | /* enable AVI info frames */ + HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */ + WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, + ~AFMT_AUDIO_SAMPLE_SEND); + } } else { WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset, ~AFMT_AUDIO_SAMPLE_SEND); @@ -423,11 +433,12 @@ void evergreen_dp_enable(struct drm_encoder *encoder, bool enable) struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; + struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); if (!dig || !dig->afmt) return; - if (enable) { + if (enable && drm_detect_monitor_audio(radeon_connector_edid(connector))) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct radeon_connector_atom_dig *dig_connector; -- cgit v0.10.2 From 7fe04d6fa824ccea704535a597dc417c8687f990 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 19 Apr 2015 12:01:00 -0400 Subject: drm/radeon: adjust pll when audio is not enabled Fixes display problems with some monitors when audio is not enabled. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89505 https://bugzilla.kernel.org/show_bug.cgi?id=94171 Plus several reports on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index dac78ad..42b2ea3 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -580,6 +580,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, else radeon_crtc->pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; + /* if there is no audio, set MINM_OVER_MAXP */ + if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) + radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; if (rdev->family < CHIP_RV770) radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; /* use frac fb div on APUs */ -- cgit v0.10.2 From cd17e02ff4db58ec32d35cf331c705d295779930 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 27 Apr 2015 09:51:43 -0400 Subject: drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index b35bccf..ff8b83f 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2924,6 +2924,7 @@ struct si_dpm_quirk { static struct si_dpm_quirk si_dpm_quirk_list[] = { /* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */ { PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 }, + { PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 }, { 0, 0, 0, 0 }, }; -- cgit v0.10.2 From 7f8d49dcc66a3dd3a8fc3078330b8fb9e616ad3f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 Apr 2015 15:59:53 +0200 Subject: ARM: dts: imx6: phyFLEX: USB VBUS control is active-high The fixed-regulator bindings require a separate property enable-active-high, the standard gpio phandle property polarity setting is ignored. Signed-off-by: Philipp Zabel Fixes: 4fe69a934b1f ("ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 19cc269..1ce6133 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 15 0>; + enable-active-high; }; reg_usb_h1_vbus: regulator@1 { @@ -40,6 +41,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 0 0>; + enable-active-high; }; }; -- cgit v0.10.2 From f90d3f0d0a11fa77918fd5497cb616dd2faa8431 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 24 Apr 2015 09:27:33 +0200 Subject: ARM: dts: imx25: Add #pwm-cells to pwm4 The property '#pwm-cells' is currently missing. It is not possible to use pwm4 without this property. Signed-off-by: Markus Pargmann Fixes: 5658a68fb578 ("ARM i.MX25: Add devicetree") Cc: Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e4d3aec..677f81d 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -428,6 +428,7 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; reg = <0x53fc8000 0x4000>; clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; -- cgit v0.10.2 From 4ada77e37a773168fea484899201e272ab44ba8b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 24 Apr 2015 13:29:47 +0200 Subject: ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name Fix a typo in the TX DMA interrupt name for AUART4. This patch makes AUART4 operational again. Signed-off-by: Marek Vasut Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma") Cc: stable@vger.kernel.org Acked-by: Stefan Wahren Signed-off-by: Shawn Guo diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt index a4873e5..e30e184 100644 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 { 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 25e25f8..4e073e8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -913,7 +913,7 @@ 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; -- cgit v0.10.2 From 393a33970540ac6a2c894b0d6ef3f5d485860884 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sun, 26 Apr 2015 16:43:31 +0800 Subject: block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE Commit d2c5e30c9a1420902262aa923794d2ae4e0bc391 ("[PATCH] zoned vm counters: conversion of nr_bounce to per zone counter") convert statistic of nr_bounce to per zone and one global value in vm_stat, but it call inc_|dec_zone_page_state on different pages, then different zones, and cause us to get unexpected value of NR_BOUNCE. Below is the result on my machine: Mar 2 09:26:08 udknight kernel: [144766.778265] Mem-Info: Mar 2 09:26:08 udknight kernel: [144766.778266] DMA per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778268] CPU 0: hi: 0, btch: 1 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778269] CPU 1: hi: 0, btch: 1 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778270] Normal per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778271] CPU 0: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778273] CPU 1: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778274] HighMem per-cpu: Mar 2 09:26:08 udknight kernel: [144766.778275] CPU 0: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778276] CPU 1: hi: 186, btch: 31 usd: 0 Mar 2 09:26:08 udknight kernel: [144766.778279] active_anon:46926 inactive_anon:287406 isolated_anon:0 Mar 2 09:26:08 udknight kernel: [144766.778279] active_file:105085 inactive_file:139432 isolated_file:0 Mar 2 09:26:08 udknight kernel: [144766.778279] unevictable:653 dirty:0 writeback:0 unstable:0 Mar 2 09:26:08 udknight kernel: [144766.778279] free:178957 slab_reclaimable:6419 slab_unreclaimable:9966 Mar 2 09:26:08 udknight kernel: [144766.778279] mapped:4426 shmem:305277 pagetables:784 bounce:0 Mar 2 09:26:08 udknight kernel: [144766.778279] free_cma:0 Mar 2 09:26:08 udknight kernel: [144766.778286] DMA free:3324kB min:68kB low:84kB high:100kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15976kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Mar 2 09:26:08 udknight kernel: [144766.778287] lowmem_reserve[]: 0 822 3754 3754 Mar 2 09:26:08 udknight kernel: [144766.778293] Normal free:26828kB min:3632kB low:4540kB high:5448kB active_anon:4872kB inactive_anon:68kB active_file:1796kB inactive_file:1796kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:892920kB managed:842560kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:4144kB slab_reclaimable:25676kB slab_unreclaimable:39864kB kernel_stack:1944kB pagetables:3136kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:2412612 all_unreclaimable? yes Mar 2 09:26:08 udknight kernel: [144766.778294] lowmem_reserve[]: 0 0 23451 23451 Mar 2 09:26:08 udknight kernel: [144766.778299] HighMem free:685676kB min:512kB low:3748kB high:6984kB active_anon:182832kB inactive_anon:1149556kB active_file:418544kB inactive_file:555932kB unevictable:2612kB isolated(anon):0kB isolated(file):0kB present:3001732kB managed:3001732kB mlocked:0kB dirty:0kB writeback:0kB mapped:17704kB shmem:1216964kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:75771152kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Mar 2 09:26:08 udknight kernel: [144766.778300] lowmem_reserve[]: 0 0 0 0 You can see bounce:75771152kB for HighMem, but bounce:0 for lowmem and global. This patch fix it. Signed-off-by: Wang YanQing Signed-off-by: Jens Axboe diff --git a/block/bounce.c b/block/bounce.c index ab21ba2..ed9dd80 100644 --- a/block/bounce.c +++ b/block/bounce.c @@ -221,8 +221,8 @@ bounce: if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force) continue; - inc_zone_page_state(to->bv_page, NR_BOUNCE); to->bv_page = mempool_alloc(pool, q->bounce_gfp); + inc_zone_page_state(to->bv_page, NR_BOUNCE); if (rw == WRITE) { char *vto, *vfrom; -- cgit v0.10.2 From 26d4d129b6042197b4cbc8341c0618f99231af2f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 27 Apr 2015 17:04:34 +0200 Subject: drm/radeon: fix lockup when BOs aren't part of the VM on release MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we unmap BOs before releasing them them the intervall tree locks up because we try to remove an entry not inside the tree. Based on a patch from Michel Dänzer. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 2a5a4a9..16d8e95 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -1107,7 +1107,8 @@ void radeon_vm_bo_rmv(struct radeon_device *rdev, list_del(&bo_va->bo_list); mutex_lock(&vm->mutex); - interval_tree_remove(&bo_va->it, &vm->va); + if (bo_va->it.start || bo_va->it.last) + interval_tree_remove(&bo_va->it, &vm->va); spin_lock(&vm->status_lock); list_del(&bo_va->vm_status); -- cgit v0.10.2 From 48afbd70ac7b6aa62e8d452091023941d8085f8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 27 Apr 2015 17:04:35 +0200 Subject: drm/radeon: reset BOs address after clearing it. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise it is possible that we will have page table corruption if we change a BOs address multiple times. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 16d8e95..cabcb0a 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -490,6 +490,8 @@ int radeon_vm_bo_set_addr(struct radeon_device *rdev, spin_lock(&vm->status_lock); list_add(&tmp->vm_status, &vm->freed); spin_unlock(&vm->status_lock); + + bo_va->addr = 0; } interval_tree_remove(&bo_va->it, &vm->va); -- cgit v0.10.2 From c29c0876ec05d51a93508a39b90b92c29ba6423d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 27 Apr 2015 17:04:36 +0200 Subject: drm/radeon: check new address before removing old one MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise the change isn't atomic. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index cabcb0a..de42fc4 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -473,6 +473,23 @@ int radeon_vm_bo_set_addr(struct radeon_device *rdev, } mutex_lock(&vm->mutex); + soffset /= RADEON_GPU_PAGE_SIZE; + eoffset /= RADEON_GPU_PAGE_SIZE; + if (soffset || eoffset) { + struct interval_tree_node *it; + it = interval_tree_iter_first(&vm->va, soffset, eoffset - 1); + if (it && it != &bo_va->it) { + struct radeon_bo_va *tmp; + tmp = container_of(it, struct radeon_bo_va, it); + /* bo and tmp overlap, invalid offset */ + dev_err(rdev->dev, "bo %p va 0x%010Lx conflict with " + "(bo %p 0x%010lx 0x%010lx)\n", bo_va->bo, + soffset, tmp->bo, tmp->it.start, tmp->it.last); + mutex_unlock(&vm->mutex); + return -EINVAL; + } + } + if (bo_va->it.start || bo_va->it.last) { if (bo_va->addr) { /* add a clone of the bo_va to clear the old address */ @@ -499,21 +516,7 @@ int radeon_vm_bo_set_addr(struct radeon_device *rdev, bo_va->it.last = 0; } - soffset /= RADEON_GPU_PAGE_SIZE; - eoffset /= RADEON_GPU_PAGE_SIZE; if (soffset || eoffset) { - struct interval_tree_node *it; - it = interval_tree_iter_first(&vm->va, soffset, eoffset - 1); - if (it) { - struct radeon_bo_va *tmp; - tmp = container_of(it, struct radeon_bo_va, it); - /* bo and tmp overlap, invalid offset */ - dev_err(rdev->dev, "bo %p va 0x%010Lx conflict with " - "(bo %p 0x%010lx 0x%010lx)\n", bo_va->bo, - soffset, tmp->bo, tmp->it.start, tmp->it.last); - mutex_unlock(&vm->mutex); - return -EINVAL; - } bo_va->it.start = soffset; bo_va->it.last = eoffset - 1; interval_tree_insert(&bo_va->it, &vm->va); -- cgit v0.10.2 From 9fb2bcf928ed5c664affaeb7edf9cc19f590b9f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 27 Apr 2015 17:04:37 +0200 Subject: drm/radeon: fix userptr return value checking (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we print false warning from time to time. v2: agd5f: rebase Signed-off-by: Christian König Signed-off-by: Jack Xiao CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_mn.c b/drivers/gpu/drm/radeon/radeon_mn.c index 0170137..535bf40 100644 --- a/drivers/gpu/drm/radeon/radeon_mn.c +++ b/drivers/gpu/drm/radeon/radeon_mn.c @@ -135,7 +135,7 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, while (it) { struct radeon_mn_node *node; struct radeon_bo *bo; - int r; + long r; node = container_of(it, struct radeon_mn_node, it); it = interval_tree_iter_next(it, start, end); @@ -144,19 +144,19 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, r = radeon_bo_reserve(bo, true); if (r) { - DRM_ERROR("(%d) failed to reserve user bo\n", r); + DRM_ERROR("(%ld) failed to reserve user bo\n", r); continue; } r = reservation_object_wait_timeout_rcu(bo->tbo.resv, true, false, MAX_SCHEDULE_TIMEOUT); - if (r) - DRM_ERROR("(%d) failed to wait for user bo\n", r); + if (r <= 0) + DRM_ERROR("(%ld) failed to wait for user bo\n", r); radeon_ttm_placement_from_domain(bo, RADEON_GEM_DOMAIN_CPU); r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false); if (r) - DRM_ERROR("(%d) failed to validate user bo\n", r); + DRM_ERROR("(%ld) failed to validate user bo\n", r); radeon_bo_unreserve(bo); } -- cgit v0.10.2 From c671835021798c1c40ca0b55b49feff76ed5e0e1 Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Sat, 25 Apr 2015 07:25:03 +0000 Subject: perf top: Fix a segfault when kernel map is restricted. Perf top raise a warning if a kernel sample is collected but kernel map is restricted. The warning message needs to dereference al.map->dso... However, previous perf_event__preprocess_sample() doesn't always guarantee al.map != NULL, for example, when kernel map is restricted. This patch validates al.map before dereferencing, avoid the segfault. Before this patch: $ cat /proc/sys/kernel/kptr_restrict 1 $ perf top -p 120183 perf: Segmentation fault -------- backtrace -------- /path/to/perf[0x509868] /lib64/libc.so.6(+0x3545f)[0x7f9a1540045f] /path/to/perf[0x448820] /path/to/perf(cmd_top+0xe3c)[0x44a5dc] /path/to/perf[0x4766a2] /path/to/perf(main+0x5f5)[0x42e545] /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4] /path/to/perf[0x42e674] And gdb call trace: Program received signal SIGSEGV, Segmentation fault. perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? (gdb) bt #0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 #1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855 #2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872 #3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997 #4 cmd_top (argc=, argv=, prefix=) at builtin-top.c:1267 #5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 , argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70) at perf.c:371 #6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430 #7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474 #8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589 (gdb) Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Zefan Li Link: http://lkml.kernel.org/r/1429946703-80807-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 1cb3436..6a4d5d4 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -733,7 +733,7 @@ static void perf_event__process_sample(struct perf_tool *tool, "Kernel address maps (/proc/{kallsyms,modules}) are restricted.\n\n" "Check /proc/sys/kernel/kptr_restrict.\n\n" "Kernel%s samples will not be resolved.\n", - !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? + al.map && !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? " modules" : ""); if (use_browser <= 0) sleep(5); -- cgit v0.10.2 From 6cd18e711dd8075da9d78cfc1239f912ff28968a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 27 Apr 2015 14:12:22 +1000 Subject: block: destroy bdi before blockdev is unregistered. Because of the peculiar way that md devices are created (automatically when the device node is opened), a new device can be created and registered immediately after the blk_unregister_region(disk_devt(disk), disk->minors); call in del_gendisk(). Therefore it is important that all visible artifacts of the previous device are removed before this call. In particular, the 'bdi'. Since: commit c4db59d31e39ea067c32163ac961e9c80198fd37 Author: Christoph Hellwig fs: don't reassign dirty inodes to default_backing_dev_info moved the device_unregister(bdi->dev); call from bdi_unregister() to bdi_destroy() it has been quite easy to lose a race and have a new (e.g.) "md127" be created after the blk_unregister_region() call and before bdi_destroy() is ultimately called by the final 'put_disk', which must come after del_gendisk(). The new device finds that the bdi name is already registered in sysfs and complains > [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70() > [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127' We can fix this by moving the bdi_destroy() call out of blk_release_queue() (which can happen very late when a refcount reaches zero) and into blk_cleanup_queue() - which happens exactly when the md device driver calls it. Then it is only necessary for md to call blk_cleanup_queue() before del_gendisk(). As loop.c devices are also created on demand by opening the device node, we make the same change there. Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37 Reported-by: Azat Khuzhin Cc: Christoph Hellwig Cc: stable@vger.kernel.org (v4.0) Signed-off-by: NeilBrown Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index fd154b9..7871603 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -552,6 +552,8 @@ void blk_cleanup_queue(struct request_queue *q) q->queue_lock = &q->__queue_lock; spin_unlock_irq(lock); + bdi_destroy(&q->backing_dev_info); + /* @q is and will stay empty, shutdown and put */ blk_put_queue(q); } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index faaf36a..2b8fd30 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -522,8 +522,6 @@ static void blk_release_queue(struct kobject *kobj) blk_trace_shutdown(q); - bdi_destroy(&q->backing_dev_info); - ida_simple_remove(&blk_queue_ida, q->id); call_rcu(&q->rcu_head, blk_free_queue_rcu); } diff --git a/drivers/block/loop.c b/drivers/block/loop.c index ae3fcb4..d7173cb 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1620,8 +1620,8 @@ out: static void loop_remove(struct loop_device *lo) { - del_gendisk(lo->lo_disk); blk_cleanup_queue(lo->lo_queue); + del_gendisk(lo->lo_disk); blk_mq_free_tag_set(&lo->tag_set); put_disk(lo->lo_disk); kfree(lo); diff --git a/drivers/md/md.c b/drivers/md/md.c index e617878..e47d1dd 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4754,12 +4754,12 @@ static void md_free(struct kobject *ko) if (mddev->sysfs_state) sysfs_put(mddev->sysfs_state); + if (mddev->queue) + blk_cleanup_queue(mddev->queue); if (mddev->gendisk) { del_gendisk(mddev->gendisk); put_disk(mddev->gendisk); } - if (mddev->queue) - blk_cleanup_queue(mddev->queue); kfree(mddev); } -- cgit v0.10.2 From 35e9a9f93994d7f7d12afa41169c7ba05513721b Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 20 Apr 2015 22:42:24 -0500 Subject: SCSI: add 1024 max sectors black list flag This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by: Christian Hesse Signed-off-by: Mike Christie Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 262ab83..9f77d23 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -226,6 +226,7 @@ static struct { {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC}, {"Promise", "", NULL, BLIST_SPARSELUN}, + {"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024}, {"QUANTUM", "XP34301", "1071", BLIST_NOTQ}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, {"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN}, diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 60aae01..6efab1c 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -897,6 +897,12 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, */ if (*bflags & BLIST_MAX_512) blk_queue_max_hw_sectors(sdev->request_queue, 512); + /* + * Max 1024 sector transfer length for targets that report incorrect + * max/optimal lengths and relied on the old block layer safe default + */ + else if (*bflags & BLIST_MAX_1024) + blk_queue_max_hw_sectors(sdev->request_queue, 1024); /* * Some devices may not want to have a start command automatically diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h index 183eaab..96e3f56 100644 --- a/include/scsi/scsi_devinfo.h +++ b/include/scsi/scsi_devinfo.h @@ -36,5 +36,6 @@ for sequential scan */ #define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */ #define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */ +#define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */ #endif -- cgit v0.10.2 From d13855ef18e1852b2c4dc86ddf5759c5b34628cb Mon Sep 17 00:00:00 2001 From: He Kuang Date: Sat, 25 Apr 2015 16:08:58 +0800 Subject: perf probe: Fix bug with global variables handling There are missing curly braces which causes find_variable() return wrong value when probing with global variables. This problem can be reproduced as following: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Try to find probe point from debuginfo. Probe point found: generic_perform_write+0 Searching 'global_variable_for_test' variable in context. An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) After this patch: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Converting variable global_variable_for_test into trace event. global_variable_for_test type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/generic_perform_write _stext+1237464 global_variable_for_test=@global_variable_for_test+0:s32 probe:generic_perform_write (on generic_perform_write with global_variable_for_test) You can now use it in all perf tools, such as: perf record -e probe:generic_perform_write -aR sleep 1 Signed-off-by: He Kuang Acked-by: Masami Hiramatsu Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Wang Nan Link: http://lkml.kernel.org/r/1429949338-18678-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 44554c3..1c3cc07 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -578,10 +578,12 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) /* Search child die for local variables and parameters. */ if (!die_find_variable_at(sc_die, pf->pvar->var, pf->addr, &vr_die)) { /* Search again in global variables */ - if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die)) + if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, + 0, &vr_die)) { pr_warning("Failed to find '%s' in this function.\n", pf->pvar->var); ret = -ENOENT; + } } if (ret >= 0) ret = convert_variable(&vr_die, pf); -- cgit v0.10.2 From 052b0f6eaf8b1f02669884a177bc3ce463133a42 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Fri, 24 Apr 2015 10:00:48 -0700 Subject: perf bench futex: Fix hung wakeup tasks after requeueing The futex-requeue benchmark can hang because of missing wakeups once the benchmark is done, ie: [Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms perf: couldn't wakeup all tasks (135/1024) This bug, while perhaps suggesting missing wakeups in kernel futex code, is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page, incorrectly mentioning that the number of requeued tasks is in fact returned, not the wakeups. This patch acknowledges this and updates the corresponding futex_wake code around it. Signed-off-by: Davidlohr Bueso Cc: Mel Gorman Link: http://lkml.kernel.org/r/1429894848.10273.44.camel@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c index bedff6b..ad0d9b5 100644 --- a/tools/perf/bench/futex-requeue.c +++ b/tools/perf/bench/futex-requeue.c @@ -132,6 +132,9 @@ int bench_futex_requeue(int argc, const char **argv, if (!fshared) futex_flag = FUTEX_PRIVATE_FLAG; + if (nrequeue > nthreads) + nrequeue = nthreads; + printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %p), " "%d at a time.\n\n", getpid(), nthreads, fshared ? "shared":"private", &futex1, &futex2, nrequeue); @@ -161,20 +164,18 @@ int bench_futex_requeue(int argc, const char **argv, /* Ok, all threads are patiently blocked, start requeueing */ gettimeofday(&start, NULL); - for (nrequeued = 0; nrequeued < nthreads; nrequeued += nrequeue) { + while (nrequeued < nthreads) { /* * Do not wakeup any tasks blocked on futex1, allowing * us to really measure futex_wait functionality. */ - futex_cmp_requeue(&futex1, 0, &futex2, 0, - nrequeue, futex_flag); + nrequeued += futex_cmp_requeue(&futex1, 0, &futex2, 0, + nrequeue, futex_flag); } + gettimeofday(&end, NULL); timersub(&end, &start, &runtime); - if (nrequeued > nthreads) - nrequeued = nthreads; - update_stats(&requeued_stats, nrequeued); update_stats(&requeuetime_stats, runtime.tv_usec); @@ -184,7 +185,7 @@ int bench_futex_requeue(int argc, const char **argv, } /* everybody should be blocked on futex2, wake'em up */ - nrequeued = futex_wake(&futex2, nthreads, futex_flag); + nrequeued = futex_wake(&futex2, nrequeued, futex_flag); if (nthreads != nrequeued) warnx("couldn't wakeup all tasks (%d/%d)", nrequeued, nthreads); -- cgit v0.10.2 From 24f1ced167e5e011040b4c3aae75aee45a79eed5 Mon Sep 17 00:00:00 2001 From: Petr Holasek Date: Thu, 16 Apr 2015 17:38:17 +0200 Subject: perf bench numa: Fixes of --quiet argument Corrected description and fixed function of --quiet argument. Signed-off-by: Petr Holasek Reviewed-by: Ingo Molnar Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1429198699-25039-2-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index ebfa163..cd872e9c 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -180,7 +180,7 @@ static const struct option options[] = { OPT_INTEGER('H', "thp" , &p0.thp, "MADV_NOHUGEPAGE < 0 < MADV_HUGEPAGE"), OPT_BOOLEAN('c', "show_convergence", &p0.show_convergence, "show convergence details"), OPT_BOOLEAN('m', "measure_convergence", &p0.measure_convergence, "measure convergence latency"), - OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "bzero the initial allocations"), + OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "quiet mode"), OPT_BOOLEAN('S', "serialize-startup", &p0.serialize_startup,"serialize thread startup"), /* Special option string parsing callbacks: */ @@ -1395,7 +1395,7 @@ static void print_res(const char *name, double val, if (!name) name = "main,"; - if (g->p.show_quiet) + if (!g->p.show_quiet) printf(" %-30s %15.3f, %-15s %s\n", name, val, txt_unit, txt_short); else printf(" %14.3f %s\n", val, txt_long); -- cgit v0.10.2 From 1d90a685eb75a56648d7dd22c704a1a6da516de9 Mon Sep 17 00:00:00 2001 From: Petr Holasek Date: Thu, 16 Apr 2015 17:38:19 +0200 Subject: perf bench numa: Fix immediate meeting of convergence condition This patch fixes the race in the beginning of benchmark run when some threads hasn't got assigned curr_cpu yet so they don't occur in nodes-of-process stats and benchmark concludes that all remaining threads are converged already. The race can be reproduced with small amount of threads and some bigger amount of shared process memory, e.g. one process, two threads and 5GB of process memory. Signed-off-by: Petr Holasek Reviewed-by: Ingo Molnar Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1429198699-25039-4-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index cd872e9c..ba5efa4 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -828,6 +828,9 @@ static int count_process_nodes(int process_nr) td = g->threads + task_nr; node = numa_node_of_cpu(td->curr_cpu); + if (node < 0) /* curr_cpu was likely still -1 */ + return 0; + node_present[node] = 1; } @@ -882,6 +885,11 @@ static void calc_convergence_compression(int *strong) for (p = 0; p < g->p.nr_proc; p++) { unsigned int nodes = count_process_nodes(p); + if (!nodes) { + *strong = 0; + return; + } + nodes_min = min(nodes, nodes_min); nodes_max = max(nodes, nodes_max); } -- cgit v0.10.2 From 8c08a6215a432a8f3629da0e8ccfd534ffa480f5 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Tue, 21 Apr 2015 23:27:50 +0200 Subject: aha1542: Allocate memory before taking a lock The driver currently calls kmalloc with GFP_KERNEL while holding a lock. Fix it by doing the allocation earlier, before taking the lock. Tested on AHA-1542B. Signed-off-by: Ondrej Zary Signed-off-by: James Bottomley diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index ec43276..b95d277 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -375,9 +375,10 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd) u8 lun = cmd->device->lun; unsigned long flags; int bufflen = scsi_bufflen(cmd); - int mbo; + int mbo, sg_count; struct mailbox *mb = aha1542->mb; struct ccb *ccb = aha1542->ccb; + struct chain *cptr; if (*cmd->cmnd == REQUEST_SENSE) { /* Don't do the command - we have the sense data already */ @@ -397,6 +398,13 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd) print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len); } #endif + if (bufflen) { /* allocate memory before taking host_lock */ + sg_count = scsi_sg_count(cmd); + cptr = kmalloc(sizeof(*cptr) * sg_count, GFP_KERNEL | GFP_DMA); + if (!cptr) + return SCSI_MLQUEUE_HOST_BUSY; + } + /* Use the outgoing mailboxes in a round-robin fashion, because this is how the host adapter will scan for them */ @@ -441,19 +449,10 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd) if (bufflen) { struct scatterlist *sg; - struct chain *cptr; - int i, sg_count = scsi_sg_count(cmd); + int i; ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */ - cmd->host_scribble = kmalloc(sizeof(*cptr)*sg_count, - GFP_KERNEL | GFP_DMA); - cptr = (struct chain *) cmd->host_scribble; - if (cptr == NULL) { - /* free the claimed mailbox slot */ - aha1542->int_cmds[mbo] = NULL; - spin_unlock_irqrestore(sh->host_lock, flags); - return SCSI_MLQUEUE_HOST_BUSY; - } + cmd->host_scribble = (void *)cptr; scsi_for_each_sg(cmd, sg, sg_count, i) { any2scsi(cptr[i].dataptr, isa_page_to_bus(sg_page(sg)) + sg->offset); -- cgit v0.10.2 From 579d69bc1fd56d5af5761969aa529d1d1c188300 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 23 Apr 2015 09:48:49 +0200 Subject: 3w-sas: fix command completion race The 3w-sas driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig Reported-by: Torsten Luettgert Tested-by: Bernd Kardatzki Cc: stable@vger.kernel.org Acked-by: Adam Radford Signed-off-by: James Bottomley diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index 2361772..f837485 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -290,26 +290,6 @@ static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id) return 0; } /* End twl_post_command_packet() */ -/* This function will perform a pci-dma mapping for a scatter gather list */ -static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id) -{ - int use_sg; - struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - - use_sg = scsi_dma_map(cmd); - if (!use_sg) - return 0; - else if (use_sg < 0) { - TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list"); - return 0; - } - - cmd->SCp.phase = TW_PHASE_SGLIST; - cmd->SCp.have_data_in = use_sg; - - return use_sg; -} /* End twl_map_scsi_sg_data() */ - /* This function hands scsi cdb's to the firmware */ static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg) { @@ -357,8 +337,8 @@ static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, if (!sglistarg) { /* Map sglist from scsi layer to cmd packet */ if (scsi_sg_count(srb)) { - sg_count = twl_map_scsi_sg_data(tw_dev, request_id); - if (sg_count == 0) + sg_count = scsi_dma_map(srb); + if (sg_count <= 0) goto out; scsi_for_each_sg(srb, sg, sg_count, i) { @@ -1102,15 +1082,6 @@ out: return retval; } /* End twl_initialize_device_extension() */ -/* This function will perform a pci-dma unmap */ -static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) -{ - struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - - if (cmd->SCp.phase == TW_PHASE_SGLIST) - scsi_dma_unmap(cmd); -} /* End twl_unmap_scsi_data() */ - /* This function will handle attention interrupts */ static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev) { @@ -1251,11 +1222,11 @@ static irqreturn_t twl_interrupt(int irq, void *dev_instance) } /* Now complete the io */ + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); tw_dev->state[request_id] = TW_S_COMPLETED; twl_free_request_id(tw_dev, request_id); tw_dev->posted_request_count--; - tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); - twl_unmap_scsi_data(tw_dev, request_id); } /* Check for another response interrupt */ @@ -1400,10 +1371,12 @@ static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_res if ((tw_dev->state[i] != TW_S_FINISHED) && (tw_dev->state[i] != TW_S_INITIAL) && (tw_dev->state[i] != TW_S_COMPLETED)) { - if (tw_dev->srb[i]) { - tw_dev->srb[i]->result = (DID_RESET << 16); - tw_dev->srb[i]->scsi_done(tw_dev->srb[i]); - twl_unmap_scsi_data(tw_dev, i); + struct scsi_cmnd *cmd = tw_dev->srb[i]; + + if (cmd) { + cmd->result = (DID_RESET << 16); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); } } } @@ -1507,9 +1480,6 @@ static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_ /* Save the scsi command for use by the ISR */ tw_dev->srb[request_id] = SCpnt; - /* Initialize phase to zero */ - SCpnt->SCp.phase = TW_PHASE_INITIAL; - retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); if (retval) { tw_dev->state[request_id] = TW_S_COMPLETED; diff --git a/drivers/scsi/3w-sas.h b/drivers/scsi/3w-sas.h index d474892..fec6449 100644 --- a/drivers/scsi/3w-sas.h +++ b/drivers/scsi/3w-sas.h @@ -103,10 +103,6 @@ static char *twl_aen_severity_table[] = #define TW_CURRENT_DRIVER_BUILD 0 #define TW_CURRENT_DRIVER_BRANCH 0 -/* Phase defines */ -#define TW_PHASE_INITIAL 0 -#define TW_PHASE_SGLIST 2 - /* Misc defines */ #define TW_SECTOR_SIZE 512 #define TW_MAX_UNITS 32 -- cgit v0.10.2 From 9cd9554615cba14f0877cc9972a6537ad2bdde61 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 23 Apr 2015 09:48:50 +0200 Subject: 3w-xxxx: fix command completion race The 3w-xxxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org Acked-by: Adam Radford Signed-off-by: James Bottomley diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index c75f204..2940bd7 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1271,32 +1271,6 @@ static int tw_initialize_device_extension(TW_Device_Extension *tw_dev) return 0; } /* End tw_initialize_device_extension() */ -static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - int use_sg; - - dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n"); - - use_sg = scsi_dma_map(cmd); - if (use_sg < 0) { - printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n"); - return 0; - } - - cmd->SCp.phase = TW_PHASE_SGLIST; - cmd->SCp.have_data_in = use_sg; - - return use_sg; -} /* End tw_map_scsi_sg_data() */ - -static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n"); - - if (cmd->SCp.phase == TW_PHASE_SGLIST) - scsi_dma_unmap(cmd); -} /* End tw_unmap_scsi_data() */ - /* This function will reset a device extension */ static int tw_reset_device_extension(TW_Device_Extension *tw_dev) { @@ -1319,8 +1293,8 @@ static int tw_reset_device_extension(TW_Device_Extension *tw_dev) srb = tw_dev->srb[i]; if (srb != NULL) { srb->result = (DID_RESET << 16); - tw_dev->srb[i]->scsi_done(tw_dev->srb[i]); - tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[i]); + scsi_dma_unmap(srb); + srb->scsi_done(srb); } } } @@ -1767,8 +1741,8 @@ static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) command_packet->byte8.io.lba = lba; command_packet->byte6.block_count = num_sectors; - use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]); - if (!use_sg) + use_sg = scsi_dma_map(srb); + if (use_sg <= 0) return 1; scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) { @@ -1955,9 +1929,6 @@ static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_c /* Save the scsi command for use by the ISR */ tw_dev->srb[request_id] = SCpnt; - /* Initialize phase to zero */ - SCpnt->SCp.phase = TW_PHASE_INITIAL; - switch (*command) { case READ_10: case READ_6: @@ -2185,12 +2156,11 @@ static irqreturn_t tw_interrupt(int irq, void *dev_instance) /* Now complete the io */ if ((error != TW_ISR_DONT_COMPLETE)) { + scsi_dma_unmap(tw_dev->srb[request_id]); + tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); tw_dev->state[request_id] = TW_S_COMPLETED; tw_state_request_finish(tw_dev, request_id); tw_dev->posted_request_count--; - tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); - - tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]); } } diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index 29b0b84e..6f65e66 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -195,11 +195,6 @@ static unsigned char tw_sense_table[][4] = #define TW_AEN_SMART_FAIL 0x000F #define TW_AEN_SBUF_FAIL 0x0024 -/* Phase defines */ -#define TW_PHASE_INITIAL 0 -#define TW_PHASE_SINGLE 1 -#define TW_PHASE_SGLIST 2 - /* Misc defines */ #define TW_ALIGNMENT_6000 64 /* 64 bytes */ #define TW_ALIGNMENT_7000 4 /* 4 bytes */ -- cgit v0.10.2 From 118c855b5623f3e2e6204f02623d88c09e0c34de Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 23 Apr 2015 09:48:51 +0200 Subject: 3w-9xxx: fix command completion race The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org Acked-by: Adam Radford Signed-off-by: James Bottomley diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 7600639..add419d 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -149,7 +149,6 @@ static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset); static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg); static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id); static char *twa_string_lookup(twa_message_type *table, unsigned int aen_code); -static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id); /* Functions */ @@ -1340,11 +1339,11 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) } /* Now complete the io */ + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); tw_dev->state[request_id] = TW_S_COMPLETED; twa_free_request_id(tw_dev, request_id); tw_dev->posted_request_count--; - tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); - twa_unmap_scsi_data(tw_dev, request_id); } /* Check for valid status after each drain */ @@ -1402,26 +1401,6 @@ static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_comm } } /* End twa_load_sgl() */ -/* This function will perform a pci-dma mapping for a scatter gather list */ -static int twa_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id) -{ - int use_sg; - struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - - use_sg = scsi_dma_map(cmd); - if (!use_sg) - return 0; - else if (use_sg < 0) { - TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to map scatter gather list"); - return 0; - } - - cmd->SCp.phase = TW_PHASE_SGLIST; - cmd->SCp.have_data_in = use_sg; - - return use_sg; -} /* End twa_map_scsi_sg_data() */ - /* This function will poll for a response interrupt of a request */ static int twa_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds) { @@ -1600,9 +1579,11 @@ static int twa_reset_device_extension(TW_Device_Extension *tw_dev) (tw_dev->state[i] != TW_S_INITIAL) && (tw_dev->state[i] != TW_S_COMPLETED)) { if (tw_dev->srb[i]) { - tw_dev->srb[i]->result = (DID_RESET << 16); - tw_dev->srb[i]->scsi_done(tw_dev->srb[i]); - twa_unmap_scsi_data(tw_dev, i); + struct scsi_cmnd *cmd = tw_dev->srb[i]; + + cmd->result = (DID_RESET << 16); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); } } } @@ -1781,21 +1762,18 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_ /* Save the scsi command for use by the ISR */ tw_dev->srb[request_id] = SCpnt; - /* Initialize phase to zero */ - SCpnt->SCp.phase = TW_PHASE_INITIAL; - retval = twa_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); switch (retval) { case SCSI_MLQUEUE_HOST_BUSY: + scsi_dma_unmap(SCpnt); twa_free_request_id(tw_dev, request_id); - twa_unmap_scsi_data(tw_dev, request_id); break; case 1: - tw_dev->state[request_id] = TW_S_COMPLETED; - twa_free_request_id(tw_dev, request_id); - twa_unmap_scsi_data(tw_dev, request_id); SCpnt->result = (DID_ERROR << 16); + scsi_dma_unmap(SCpnt); done(SCpnt); + tw_dev->state[request_id] = TW_S_COMPLETED; + twa_free_request_id(tw_dev, request_id); retval = 0; } out: @@ -1863,8 +1841,8 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, command_packet->sg_list[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); command_packet->sg_list[0].length = cpu_to_le32(TW_MIN_SGL_LENGTH); } else { - sg_count = twa_map_scsi_sg_data(tw_dev, request_id); - if (sg_count == 0) + sg_count = scsi_dma_map(srb); + if (sg_count < 0) goto out; scsi_for_each_sg(srb, sg, sg_count, i) { @@ -1979,15 +1957,6 @@ static char *twa_string_lookup(twa_message_type *table, unsigned int code) return(table[index].text); } /* End twa_string_lookup() */ -/* This function will perform a pci-dma unmap */ -static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) -{ - struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - - if (cmd->SCp.phase == TW_PHASE_SGLIST) - scsi_dma_unmap(cmd); -} /* End twa_unmap_scsi_data() */ - /* This function gets called when a disk is coming on-line */ static int twa_slave_configure(struct scsi_device *sdev) { diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 040f721..0fdc83c 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -324,11 +324,6 @@ static twa_message_type twa_error_table[] = { #define TW_CURRENT_DRIVER_BUILD 0 #define TW_CURRENT_DRIVER_BRANCH 0 -/* Phase defines */ -#define TW_PHASE_INITIAL 0 -#define TW_PHASE_SINGLE 1 -#define TW_PHASE_SGLIST 2 - /* Misc defines */ #define TW_9550SX_DRAIN_COMPLETED 0xFFFF #define TW_SECTOR_SIZE 512 -- cgit v0.10.2 From 2a700d8edffdbfb8200332d96c3147e042b337f1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Apr 2015 11:18:51 -0300 Subject: [media] marvell-ccic: fix Y'CbCr ordering Various formats had their byte ordering implemented incorrectly, and the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you get V4L2_PIX_FMT_YVYU. This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1 ("add new formats support for marvell-ccic driver"). That commit broke the original format support and the OLPC XO-1 laptop showed wrong colors ever since (if you are crazy enough to attempt to run the latest kernel on it, like I did). The email addresses of the authors of that patch are no longer valid, so without a way to reach them and ask them about their test setup I am going with what I can test on the OLPC laptop. If this breaks something for someone on their non-OLPC setup, then contact the linux-media mailinglist. My suspicion however is that that commit went in untested. Signed-off-by: Hans Verkuil Acked-by: Jonathan Corbet Cc: # for v3.19 and up Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 9c64b5d..110fd70 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -116,8 +116,8 @@ static struct mcam_format_struct { .planar = false, }, { - .desc = "UYVY 4:2:2", - .pixelformat = V4L2_PIX_FMT_UYVY, + .desc = "YVYU 4:2:2", + .pixelformat = V4L2_PIX_FMT_YVYU, .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, .bpp = 2, .planar = false, @@ -748,7 +748,7 @@ static void mcam_ctlr_image(struct mcam_camera *cam) switch (fmt->pixelformat) { case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: widthy = fmt->width * 2; widthuv = 0; break; @@ -784,15 +784,15 @@ static void mcam_ctlr_image(struct mcam_camera *cam) case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK); + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK); break; case V4L2_PIX_FMT_YUYV: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK); break; - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK); break; case V4L2_PIX_FMT_JPEG: mcam_reg_write_mask(cam, REG_CTRL0, diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index aa0c6ea..7ffdf4d 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -330,10 +330,10 @@ int mccic_resume(struct mcam_camera *cam); #define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ #define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ #define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ -#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ -#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ -#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ -#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */ +#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */ +#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */ +#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */ /* Bayer bits 18,19 if needed */ #define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ #define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ -- cgit v0.10.2 From 5a9b06a27db6b006605421658418fb8943a6e217 Mon Sep 17 00:00:00 2001 From: Koji Matsuoka Date: Sun, 29 Mar 2015 10:04:56 -0300 Subject: [media] media: soc_camera: rcar_vin: Fix wait_for_completion When stopping abnormally, a driver can't return from wait_for_completion. This patch resolved this problem by changing wait_for_completion_timeout from wait_for_completion. Signed-off-by: Koji Matsuoka Signed-off-by: Yoshihiro Kaneko Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 9351f64..6460f8e 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -135,6 +135,8 @@ #define VIN_MAX_WIDTH 2048 #define VIN_MAX_HEIGHT 2048 +#define TIMEOUT_MS 100 + enum chip_id { RCAR_GEN2, RCAR_H1, @@ -820,7 +822,10 @@ static void rcar_vin_wait_stop_streaming(struct rcar_vin_priv *priv) if (priv->state == STOPPING) { priv->request_to_stop = true; spin_unlock_irq(&priv->lock); - wait_for_completion(&priv->capture_stop); + if (!wait_for_completion_timeout( + &priv->capture_stop, + msecs_to_jiffies(TIMEOUT_MS))) + priv->state = STOPPED; spin_lock_irq(&priv->lock); } } -- cgit v0.10.2 From 68ce9a1f24b8e8894955032a4af74998315be9fe Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 28 Apr 2015 09:05:21 +0800 Subject: ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios The pinctrl-assert-gpios is an invalid pinctrl property. It was probably sneaked from vendor tree. Remove it. Fixes: 4e18a2243a87 ("ARM: imx6qdl-sabreauto.dtsi: add max7310 support") Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 46b2fed..3b24b126 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -185,7 +185,6 @@ &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; status = "okay"; max7310_a: gpio@30 { -- cgit v0.10.2 From 414b7e3b9ce8b0577f613e656fdbc36b34b444dd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 24 Apr 2015 11:03:37 -0500 Subject: rtlwifi: rtl8192cu: Fix kernel deadlock The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann Tested-by: Bernhard Wiedemann Signed-off-by: Larry Finger Cc: Stable Cc: Bernhard Wiedemann Cc: Takashi Iwai Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f0188c8..2721cf8 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -126,7 +126,7 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, do { status = usb_control_msg(udev, pipe, request, reqtype, value, - index, pdata, len, 0); /*max. timeout*/ + index, pdata, len, 1000); if (status < 0) { /* firmware download is checksumed, don't retry */ if ((value >= FW_8192C_START_ADDRESS && -- cgit v0.10.2 From fefad2d54beb8aad6bf4ac6daeb74f86f52565de Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 12 Apr 2015 09:09:05 -0300 Subject: [media] v4l: omap4iss: Replace outdated OMAP4 control pad API with syscon The omap4_ctrl_pad_readl and omap4_ctrl_pad_writel functions have been removed by commit efde234674d9 but are still used by the OMAP4 ISS driver, resulting in a compilation breakage: drivers/staging/media/omap4iss/iss_csiphy.c: In function 'omap4iss_csiphy_config': drivers/staging/media/omap4iss/iss_csiphy.c:167:2: error: implicit declaration of function 'omap4_ctrl_pad_writel' [-Werror=implicit-function-declaration] omap4_ctrl_pad_writel(cam_rx_ctrl, Fix the problem by using the syscon API to reaplace the control pad API. Lookup the syscon instance by compatible name for now as the OMAP4 ISS driver doesn't support DT yet. Fixes: efde234674d9 ("ARM: OMAP4+: control: remove support for legacy pad read/write") Signed-off-by: Laurent Pinchart Acked-by: Sakari Alius Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig index b78643f..072dac0 100644 --- a/drivers/staging/media/omap4iss/Kconfig +++ b/drivers/staging/media/omap4iss/Kconfig @@ -2,6 +2,7 @@ config VIDEO_OMAP4 bool "OMAP 4 Camera support" depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 depends on HAS_DMA + select MFD_SYSCON select VIDEOBUF2_DMA_CONTIG ---help--- Driver for an OMAP 4 ISS controller. diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c index e0ad5e5..7ced940 100644 --- a/drivers/staging/media/omap4iss/iss.c +++ b/drivers/staging/media/omap4iss/iss.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -1386,6 +1387,16 @@ static int iss_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iss); + /* + * TODO: When implementing DT support switch to syscon regmap lookup by + * phandle. + */ + iss->syscon = syscon_regmap_lookup_by_compatible("syscon"); + if (IS_ERR(iss->syscon)) { + ret = PTR_ERR(iss->syscon); + goto error; + } + /* Clocks */ ret = iss_map_mem_resource(pdev, iss, OMAP4_ISS_MEM_TOP); if (ret < 0) diff --git a/drivers/staging/media/omap4iss/iss.h b/drivers/staging/media/omap4iss/iss.h index 734cfee..35df8b4 100644 --- a/drivers/staging/media/omap4iss/iss.h +++ b/drivers/staging/media/omap4iss/iss.h @@ -29,6 +29,8 @@ #include "iss_ipipe.h" #include "iss_resizer.h" +struct regmap; + #define to_iss_device(ptr_module) \ container_of(ptr_module, struct iss_device, ptr_module) #define to_device(ptr_module) \ @@ -79,6 +81,7 @@ struct iss_reg { /* * struct iss_device - ISS device structure. + * @syscon: Regmap for the syscon register space * @crashed: Bitmask of crashed entities (indexed by entity ID) */ struct iss_device { @@ -93,6 +96,7 @@ struct iss_device { struct resource *res[OMAP4_ISS_MEM_LAST]; void __iomem *regs[OMAP4_ISS_MEM_LAST]; + struct regmap *syscon; u64 raw_dmamask; diff --git a/drivers/staging/media/omap4iss/iss_csiphy.c b/drivers/staging/media/omap4iss/iss_csiphy.c index 7c3d55d..748607f 100644 --- a/drivers/staging/media/omap4iss/iss_csiphy.c +++ b/drivers/staging/media/omap4iss/iss_csiphy.c @@ -13,6 +13,7 @@ #include #include +#include #include "../../../../arch/arm/mach-omap2/control.h" @@ -140,9 +141,11 @@ int omap4iss_csiphy_config(struct iss_device *iss, * - bit [18] : CSIPHY1 CTRLCLK enable * - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2 */ - cam_rx_ctrl = omap4_ctrl_pad_readl( - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX); - + /* + * TODO: When implementing DT support specify the CONTROL_CAMERA_RX + * register offset in the syscon property instead of hardcoding it. + */ + regmap_read(iss->syscon, 0x68, &cam_rx_ctrl); if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) { cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK | @@ -166,8 +169,7 @@ int omap4iss_csiphy_config(struct iss_device *iss, cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK; } - omap4_ctrl_pad_writel(cam_rx_ctrl, - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX); + regmap_write(iss->syscon, 0x68, cam_rx_ctrl); /* Reset used lane count */ csi2->phy->used_data_lanes = 0; -- cgit v0.10.2 From 8d193ca26cc28019e760b77830295a0c349d90dc Mon Sep 17 00:00:00 2001 From: Eran Harary Date: Mon, 27 Apr 2015 10:29:31 +0300 Subject: iwlwifi: mvm: don't power off the device between INIT and OPER firmwares Our device needs two different firmwares: the INIT firmware and the operational (OPER) firmware. The first one is run when the driver loads and it returns calibrations results as well as the NVM. The second one implements the WiFi protocol. If the wlan interface is not brought up, the device is put to low power state: no firmware will be running. When the interface is brought up, we would run the OPER firmware only and reuse the results of the run of the INIT firmware when the driver was loaded. This is changing with this patch. We now run the INIT firmware every time mac80211 calls start(). The penalty for that is minimal since the INIT firwmare run fast. I now also avoid to power down the device between the INIT and OPER firmware on certains buses. The motivation for this change is that there are components on the device (MFUART) that are triggered by the INIT firmware and need the device to be powered up in order to keep running. Powering the device down between the INIT and OPER firmware would stop these components and prevent them from running again since they are triggered by the INIT firmware only. The new flow allows this and also allows to trigger these components again when the interface is brought up after it has been brought down. Signed-off-by: Eran Harary Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 6dfed12..56254a8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -421,8 +421,9 @@ struct iwl_trans_txq_scd_cfg { * * All the handlers MUST be implemented * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep + * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken + * out of a low power state. From that point on, the HW can send + * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport @@ -432,10 +433,11 @@ struct iwl_trans_txq_scd_cfg { * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. From that point on, the HW will be in low power but will still - * issue interrupt if the HW RF kill is triggered. This callback must do - * the right thing and not crash even if start_hw() was called but not - * start_fw(). May sleep + * the HW. If low_power is true, the NIC will be put in low power state. + * From that point on, the HW will be stopped but will still issue an + * interrupt if the HW RF kill switch is triggered. + * This callback must do the right thing and not crash even if %start_hw() + * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. @@ -491,14 +493,14 @@ struct iwl_trans_txq_scd_cfg { */ struct iwl_trans_ops { - int (*start_hw)(struct iwl_trans *iwl_trans); + int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans); + void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, @@ -652,11 +654,16 @@ static inline void iwl_trans_configure(struct iwl_trans *trans, trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_hw(struct iwl_trans *trans) +static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); - return trans->ops->start_hw(trans); + return trans->ops->start_hw(trans, low_power); +} + +static inline int iwl_trans_start_hw(struct iwl_trans *trans) +{ + return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) @@ -703,15 +710,21 @@ static inline int iwl_trans_update_sf(struct iwl_trans *trans, return 0; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void _iwl_trans_stop_device(struct iwl_trans *trans, + bool low_power) { might_sleep(); - trans->ops->stop_device(trans); + trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_stop_device(struct iwl_trans *trans) +{ + _iwl_trans_stop_device(trans, true); +} + static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) { might_sleep(); diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 9c28fe7..df86963 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -322,7 +322,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) + if (WARN_ON_ONCE(mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -396,8 +396,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) */ ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, MVM_UCODE_CALIB_TIMEOUT); - if (!ret) - mvm->init_ucode_complete = true; if (ret && iwl_mvm_is_radio_killed(mvm)) { IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); @@ -649,25 +647,24 @@ int iwl_mvm_up(struct iwl_mvm *mvm) * module loading, load init ucode now * (for example, if we were in RFKILL) */ - if (!mvm->init_ucode_complete) { - ret = iwl_run_init_mvm_ucode(mvm, false); - if (ret && !iwlmvm_mod_params.init_dbg) { - IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); - /* this can't happen */ - if (WARN_ON(ret > 0)) - ret = -ERFKILL; - goto error; - } - if (!iwlmvm_mod_params.init_dbg) { - /* - * should stop and start HW since that INIT - * image just loaded - */ - iwl_trans_stop_device(mvm->trans); - ret = iwl_trans_start_hw(mvm->trans); - if (ret) - return ret; - } + ret = iwl_run_init_mvm_ucode(mvm, false); + if (ret && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); + /* this can't happen */ + if (WARN_ON(ret > 0)) + ret = -ERFKILL; + goto error; + } + if (!iwlmvm_mod_params.init_dbg) { + /* + * Stop and start the transport without entering low power + * mode. This will save the state of other components on the + * device that are triggered by the INIT firwmare (MFUART). + */ + _iwl_trans_stop_device(mvm->trans, false); + _iwl_trans_start_hw(mvm->trans, false); + if (ret) + return ret; } if (iwlmvm_mod_params.init_dbg) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d5522a1..cf70f68 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -603,7 +603,6 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; - bool init_ucode_complete; bool calibrating; u32 error_event_table; u32 log_event_table; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 6debb0c..47bbf57 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1021,7 +1021,7 @@ static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) iwl_pcie_tx_start(trans, scd_addr); } -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) +static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill, was_hw_rfkill; @@ -1116,7 +1116,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state) { if (iwl_op_mode_hw_rf_kill(trans->op_mode, state)) - iwl_trans_pcie_stop_device(trans); + iwl_trans_pcie_stop_device(trans, true); } static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test) @@ -1201,7 +1201,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, return 0; } -static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) +static int iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power) { bool hw_rfkill; int err; -- cgit v0.10.2 From 6bbd5521edd3896190f5c0581f059b7c93daf670 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 28 Apr 2015 15:00:23 +0300 Subject: iwlwifi: mvm: fix typo in CONFIG option I forgot to rename the CPTCFG_ prefix... Fixes: 484b3d13b4ac ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans") Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a6c48c7..1b1b2bf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1726,7 +1726,7 @@ iwl_mvm_netdetect_query_results(struct iwl_mvm *mvm, results->matched_profiles = le32_to_cpu(query->matched_profiles); memcpy(results->matches, query->matches, sizeof(results->matches)); -#ifdef CPTCFG_IWLWIFI_DEBUGFS +#ifdef CONFIG_IWLWIFI_DEBUGFS mvm->last_netdetect_scans = le32_to_cpu(query->n_scans_done); #endif -- cgit v0.10.2 From e7afe89fd67d40a7f5fff8130c5f925d99a94b1f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2015 09:21:46 +0200 Subject: iwlwifi: mvm: force quota update update after FW restart During firmware restart, the quota command isn't calculated multiple times, but after the firmware restart it has to be sent, so force it. Otherwise the firmware crashes. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7c2d5ac..40265b9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1322,7 +1322,7 @@ static void iwl_mvm_restart_complete(struct iwl_mvm *mvm) clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); iwl_mvm_d0i3_enable_tx(mvm, NULL); - ret = iwl_mvm_update_quotas(mvm, false, NULL); + ret = iwl_mvm_update_quotas(mvm, true, NULL); if (ret) IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n", ret); -- cgit v0.10.2 From 982df6aec06479c844f46f7a5cc960151f8fc005 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:35 +0300 Subject: pinctrl: qcom-spmi-gpio: Fix output type configuration GPIO output type configuration was incorrectly overwritten by strength value. Fix this. Signed-off-by: Ivan T. Ivanov Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index b2d2221..4b21aac 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -417,7 +417,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin, return ret; val = pad->buffer_type << PMIC_GPIO_REG_OUT_TYPE_SHIFT; - val = pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT; + val |= pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT; ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL, val); if (ret < 0) -- cgit v0.10.2 From 24a66618d63548e1012bf65ed30a3c031f410ca2 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:36 +0300 Subject: pinctrl: qcom-spmi-gpio: Fix input value report Read input buffer when input is enabled, not when it is disabled. Also fix interpretation of the pmic_gpio_read() return code, negative value means an error. Signed-off-by: Ivan T. Ivanov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 4b21aac..e8b74c6 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -466,12 +466,13 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev, seq_puts(s, " ---"); } else { - if (!pad->input_enabled) { + if (pad->input_enabled) { ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS); - if (!ret) { - ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; - pad->out_value = ret; - } + if (ret < 0) + return; + + ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; + pad->out_value = ret; } seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in"); -- cgit v0.10.2 From 4e637ac212b63f4b5dd1da626aca34ffcbfd5daa Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 18:18:37 +0300 Subject: pinctrl: qcom-spmi-mpp: Fix input value report Fix interpretation of the pmic_mpp_read() return code, negative value means an error. Signed-off-by: Ivan T. Ivanov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 890df16..211b942 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -577,10 +577,11 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, if (pad->input_enabled) { ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS); - if (!ret) { - ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; - pad->out_value = ret; - } + if (ret < 0) + return; + + ret &= PMIC_MPP_REG_RT_STS_VAL_MASK; + pad->out_value = ret; } seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in"); -- cgit v0.10.2 From a04f90a33fab74789b91fc9739999012f11022d1 Mon Sep 17 00:00:00 2001 From: Deepak S Date: Thu, 16 Apr 2015 08:51:28 +0530 Subject: drm/i915/chv: Implement WaDisableShadowRegForCpd MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This WA is avoid problem between shadow vs wake FIFO unload problem during CPD/RC6 transactions on CHV. v2: Define individual bits GTFIFOCTL (Ville) v3: move WA to uncore_early_sanitize (ville) Signed-off-by: Deepak S Reviewed-by: Ville Syrjälä [Jani: fixed some whitespace issues while applying] Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3da1af4..773d1d2 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6074,6 +6074,8 @@ enum skl_disp_power_wells { #define GTFIFOCTL 0x120008 #define GT_FIFO_FREE_ENTRIES_MASK 0x7f #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL (1 << 12) +#define GT_FIFO_CTL_RC6_POLICY_STALL (1 << 11) #define HSW_IDICR 0x9008 #define IDIHASHMSK(x) (((x) & 0x3f) << 16) diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index ab5cc94..ff2a746 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -360,6 +360,14 @@ static void __intel_uncore_early_sanitize(struct drm_device *dev, __raw_i915_write32(dev_priv, GTFIFODBG, __raw_i915_read32(dev_priv, GTFIFODBG)); + /* WaDisableShadowRegForCpd:chv */ + if (IS_CHERRYVIEW(dev)) { + __raw_i915_write32(dev_priv, GTFIFOCTL, + __raw_i915_read32(dev_priv, GTFIFOCTL) | + GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL | + GT_FIFO_CTL_RC6_POLICY_STALL); + } + intel_uncore_forcewake_reset(dev, restore_forcewake); } -- cgit v0.10.2 From 433c5c20c505fef92be84c6afab70f1c2ab5eda3 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 28 Apr 2015 10:34:35 +1000 Subject: powerpc/kvm: Fix SMP=n build error in book3s_xics.c Commit 34cb7954c0aa "Convert ICS mutex lock to spin lock" added an include of asm/spinlock.h, which does not work in the SMP=n case. It should instead include linux/spinlock.h Fixes: 34cb7954c0aa ("KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock") Acked-by: Paul Mackerras Reviewed-by: Alexander Graf Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index 8f3e6cc..c6ca7db 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -20,7 +21,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From d33047fd7e7d93662622888681861ba84d43c506 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Mon, 27 Apr 2015 12:33:51 +1000 Subject: powerpc/powernv: Fix early pci_controller_ops loading. Load the PowerNV platform pci controller ops into pci controllers after all the operations are loaded into the platform ops struct, not before. Otherwise we aren't actually setting the ops properly which can break IO for some devices. Fixes: 65ebf4b63 ("powerpc/powernv: Move controller ops from ppc_md to controller_ops") Reported-by: Gavin Shan Reviewed-by: Gavin Shan Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 920c252..f8bc950 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, hose->last_busno = 0xff; } hose->private_data = phb; - hose->controller_ops = pnv_pci_controller_ops; phb->hub_id = hub_id; phb->opal_id = phb_id; phb->type = ioda_type; @@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook; pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment; pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus; + hose->controller_ops = pnv_pci_controller_ops; #ifdef CONFIG_PCI_IOV ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources; -- cgit v0.10.2 From 63f89caad0e32dcfa17b2d17919816253de48996 Mon Sep 17 00:00:00 2001 From: Christopher Freeman Date: Wed, 4 Mar 2015 01:16:58 -0800 Subject: dmaengine: increment privatecnt when using dma_get_any_slave_channel Channels allocated via dma_get_any_slave_channel were not increasing the counter tracking private allocations. When these channels were released, privatecnt may erroneously fall to zero. The DMA device would then lose its DMA_PRIVATE cap and fail to allocate future private channels (via private_candidate) as any allocations still outstanding would incorrectly be seen as public allocations. Signed-off-by: Christopher Freeman Signed-off-by: Vinod Koul diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 0e035a8..2890d74 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -571,11 +571,15 @@ struct dma_chan *dma_get_any_slave_channel(struct dma_device *device) chan = private_candidate(&mask, device, NULL, NULL); if (chan) { + dma_cap_set(DMA_PRIVATE, device->cap_mask); + device->privatecnt++; err = dma_chan_get(chan); if (err) { pr_debug("%s: failed to get %s: (%d)\n", __func__, dma_chan_name(chan), err); chan = NULL; + if (--device->privatecnt == 0) + dma_cap_clear(DMA_PRIVATE, device->cap_mask); } } -- cgit v0.10.2 From 2b953a5e994ce279904ec70220f7d4f31d380a0a Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Tue, 28 Apr 2015 18:46:20 -0400 Subject: xen: Suspend ticks on all CPUs during suspend Commit 77e32c89a711 ("clockevents: Manage device's state separately for the core") decouples clockevent device's modes from states. With this change when a Xen guest tries to resume, it won't be calling its set_mode op which needs to be done on each VCPU in order to make the hypervisor aware that we are in oneshot mode. This happens because clockevents_tick_resume() (which is an intermediate step of resuming ticks on a processor) doesn't call clockevents_set_state() anymore and because during suspend clockevent devices on all VCPUs (except for the one doing the suspend) are left in ONESHOT state. As result, during resume the clockevents state machine will assume that device is already where it should be and doesn't need to be updated. To avoid this problem we should suspend ticks on all VCPUs during suspend. Signed-off-by: Boris Ostrovsky Signed-off-by: David Vrabel diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index d949769..53b4c08 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -88,7 +88,17 @@ static void xen_vcpu_notify_restore(void *data) tick_resume_local(); } +static void xen_vcpu_notify_suspend(void *data) +{ + tick_suspend_local(); +} + void xen_arch_resume(void) { on_each_cpu(xen_vcpu_notify_restore, NULL, 1); } + +void xen_arch_suspend(void) +{ + on_each_cpu(xen_vcpu_notify_suspend, NULL, 1); +} diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index bf19407..9e6a851 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -131,6 +131,8 @@ static void do_suspend(void) goto out_resume; } + xen_arch_suspend(); + si.cancelled = 1; err = stop_machine(xen_suspend, &si, cpumask_of(0)); @@ -148,11 +150,12 @@ static void do_suspend(void) si.cancelled = 1; } + xen_arch_resume(); + out_resume: - if (!si.cancelled) { - xen_arch_resume(); + if (!si.cancelled) xs_resume(); - } else + else xs_suspend_cancel(); dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index c643e6a..0ce4f32 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -13,6 +13,7 @@ void xen_arch_post_suspend(int suspend_cancelled); void xen_timer_resume(void); void xen_arch_resume(void); +void xen_arch_suspend(void); void xen_resume_notifier_register(struct notifier_block *nb); void xen_resume_notifier_unregister(struct notifier_block *nb); -- cgit v0.10.2 From 8014bcc86ef112eab9ee1db312dba4e6b608cf89 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2015 00:26:35 +0100 Subject: xen-pciback: Add name prefix to global 'permissive' variable The variable for the 'permissive' module parameter used to be static but was recently changed to be extern. This puts it in the kernel global namespace if the driver is built-in, so its name should begin with a prefix identifying the driver. Signed-off-by: Ben Hutchings Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register") Signed-off-by: David Vrabel diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c index 75fe3d4..9c23420 100644 --- a/drivers/xen/xen-pciback/conf_space.c +++ b/drivers/xen/xen-pciback/conf_space.c @@ -16,8 +16,8 @@ #include "conf_space.h" #include "conf_space_quirks.h" -bool permissive; -module_param(permissive, bool, 0644); +bool xen_pcibk_permissive; +module_param_named(permissive, xen_pcibk_permissive, bool, 0644); /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word, * xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */ @@ -262,7 +262,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value) * This means that some fields may still be read-only because * they have entries in the config_field list that intercept * the write and do nothing. */ - if (dev_data->permissive || permissive) { + if (dev_data->permissive || xen_pcibk_permissive) { switch (size) { case 1: err = pci_write_config_byte(dev, offset, diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h index 2e1d73d..62461a8 100644 --- a/drivers/xen/xen-pciback/conf_space.h +++ b/drivers/xen/xen-pciback/conf_space.h @@ -64,7 +64,7 @@ struct config_field_entry { void *data; }; -extern bool permissive; +extern bool xen_pcibk_permissive; #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset) diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c index c2260a0..ad3d17d 100644 --- a/drivers/xen/xen-pciback/conf_space_header.c +++ b/drivers/xen/xen-pciback/conf_space_header.c @@ -118,7 +118,7 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data) cmd->val = value; - if (!permissive && (!dev_data || !dev_data->permissive)) + if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive)) return 0; /* Only allow the guest to control certain bits. */ -- cgit v0.10.2 From 483d821108791092798f5d230686868112927044 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 21 Apr 2015 17:42:09 +0200 Subject: gpio: sysfs: fix memory leaks and device hotplug Unregister GPIOs requested through sysfs at chip remove to avoid leaking the associated memory and sysfs entries. The stale sysfs entries prevented the gpio numbers from being exported when the gpio range was later reused (e.g. at device reconnect). This also fixes the related module-reference leak. Note that kernfs makes sure that any on-going sysfs operations finish before the class devices are unregistered and that further accesses fail. The chip exported flag is used to prevent gpiod exports during removal. This also makes it harder to trigger, but does not fix, the related race between gpiochip_remove and export_store, which is really a race with gpiod_request that needs to be addressed separately. Also note that this would prevent the crashes (e.g. NULL-dereferences) at reconnect that affects pre-3.18 kernels, as well as use-after-free on operations on open attribute files on pre-3.14 kernels (prior to kernfs). Fixes: d8f388d8dc8d ("gpio: sysfs interface") Cc: stable # v2.6.27: 01cca93a9491 Signed-off-by: Johan Hovold Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 7722ed5..af3bc7a 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -551,6 +551,7 @@ static struct class gpio_class = { */ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) { + struct gpio_chip *chip; unsigned long flags; int status; const char *ioname = NULL; @@ -568,8 +569,16 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) return -EINVAL; } + chip = desc->chip; + mutex_lock(&sysfs_lock); + /* check if chip is being removed */ + if (!chip || !chip->exported) { + status = -ENODEV; + goto fail_unlock; + } + spin_lock_irqsave(&gpio_lock, flags); if (!test_bit(FLAG_REQUESTED, &desc->flags) || test_bit(FLAG_EXPORT, &desc->flags)) { @@ -783,12 +792,15 @@ void gpiochip_unexport(struct gpio_chip *chip) { int status; struct device *dev; + struct gpio_desc *desc; + unsigned int i; mutex_lock(&sysfs_lock); dev = class_find_device(&gpio_class, NULL, chip, match_export); if (dev) { put_device(dev); device_unregister(dev); + /* prevent further gpiod exports */ chip->exported = false; status = 0; } else @@ -797,6 +809,13 @@ void gpiochip_unexport(struct gpio_chip *chip) if (status) chip_dbg(chip, "%s: status %d\n", __func__, status); + + /* unregister gpiod class devices owned by sysfs */ + for (i = 0; i < chip->ngpio; i++) { + desc = &chip->desc[i]; + if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) + gpiod_free(desc); + } } static int __init gpiolib_sysfs_init(void) -- cgit v0.10.2 From 16e5c47a0f90a37cf8b8d50b5eaf3cd3f7ed9530 Mon Sep 17 00:00:00 2001 From: DingXiang Date: Fri, 10 Apr 2015 16:45:58 +0800 Subject: Bluetooth: bt3c: Delete some unuseful comments I think the comments are used to debug, and we don't need them in mainline code Signed-off-by: DingXiang Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 4f7e8d4..6de97b3 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -227,7 +227,6 @@ static void bt3c_receive(struct bt3c_info *info) iobase = info->p_dev->resource[0]->start; avail = bt3c_read(iobase, 0x7006); - //printk("bt3c_cs: receiving %d bytes\n", avail); bt3c_address(iobase, 0x7480); while (size < avail) { @@ -250,7 +249,6 @@ static void bt3c_receive(struct bt3c_info *info) bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L); inb(iobase + DATA_H); - //printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type); switch (bt_cb(info->rx_skb)->pkt_type) { @@ -364,7 +362,6 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) if (stat & 0x0001) bt3c_receive(info); if (stat & 0x0002) { - //BT_ERR("Ack (stat=0x%04x)", stat); clear_bit(XMIT_SENDING, &(info->tx_state)); bt3c_write_wakeup(info); } -- cgit v0.10.2 From 50862ee5578efa342a25c8b86f0080494736057f Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 10 Apr 2015 14:02:20 -0700 Subject: Bluetooth: btbcm: Export patchram download as separate function This isolates the Broadcom patchram download procedure as separate function so that it can be easily used from USB and UART based drivers. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index d0741f3..4bba866 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -95,6 +95,78 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(btbcm_set_bdaddr); +int btbcm_patchram(struct hci_dev *hdev, const char *firmware) +{ + const struct hci_command_hdr *cmd; + const struct firmware *fw; + const u8 *fw_ptr; + size_t fw_size; + struct sk_buff *skb; + u16 opcode; + int err; + + err = request_firmware(&fw, firmware, &hdev->dev); + if (err < 0) { + BT_INFO("%s: BCM: Patch %s not found", hdev->name, firmware); + return err; + } + + /* Start Download */ + skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: BCM: Download Minidrv command failed (%d)", + hdev->name, err); + goto done; + } + kfree_skb(skb); + + /* 50 msec delay after Download Minidrv completes */ + msleep(50); + + fw_ptr = fw->data; + fw_size = fw->size; + + while (fw_size >= sizeof(*cmd)) { + const u8 *cmd_param; + + cmd = (struct hci_command_hdr *)fw_ptr; + fw_ptr += sizeof(*cmd); + fw_size -= sizeof(*cmd); + + if (fw_size < cmd->plen) { + BT_ERR("%s: BCM: Patch %s is corrupted", hdev->name, + firmware); + err = -EINVAL; + goto done; + } + + cmd_param = fw_ptr; + fw_ptr += cmd->plen; + fw_size -= cmd->plen; + + opcode = le16_to_cpu(cmd->opcode); + + skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: BCM: Patch command %04x failed (%d)", + hdev->name, opcode, err); + goto done; + } + kfree_skb(skb); + } + + /* 250 msec delay after Launch Ram completes */ + msleep(250); + +done: + release_firmware(fw); + return err; +} +EXPORT_SYMBOL(btbcm_patchram); + static int btbcm_reset(struct hci_dev *hdev) { struct sk_buff *skb; @@ -198,12 +270,8 @@ static const struct { int btbcm_setup_patchram(struct hci_dev *hdev) { - const struct hci_command_hdr *cmd; - const struct firmware *fw; - const u8 *fw_ptr; - size_t fw_size; char fw_name[64]; - u16 opcode, subver, rev, pid, vid; + u16 subver, rev, pid, vid; const char *hw_name = NULL; struct sk_buff *skb; struct hci_rp_read_local_version *ver; @@ -273,74 +341,19 @@ int btbcm_setup_patchram(struct hci_dev *hdev) hw_name ? : "BCM", (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff); - err = request_firmware(&fw, fw_name, &hdev->dev); - if (err < 0) { - BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name); + err = btbcm_patchram(hdev, fw_name); + if (err == -ENOENT) return 0; - } - - /* Start Download */ - skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - BT_ERR("%s: BCM: Download Minidrv command failed (%d)", - hdev->name, err); - goto reset; - } - kfree_skb(skb); - - /* 50 msec delay after Download Minidrv completes */ - msleep(50); - - fw_ptr = fw->data; - fw_size = fw->size; - - while (fw_size >= sizeof(*cmd)) { - const u8 *cmd_param; - - cmd = (struct hci_command_hdr *)fw_ptr; - fw_ptr += sizeof(*cmd); - fw_size -= sizeof(*cmd); - - if (fw_size < cmd->plen) { - BT_ERR("%s: BCM: patch %s is corrupted", hdev->name, - fw_name); - err = -EINVAL; - goto reset; - } - cmd_param = fw_ptr; - fw_ptr += cmd->plen; - fw_size -= cmd->plen; - - opcode = le16_to_cpu(cmd->opcode); - - skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, - HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - BT_ERR("%s: BCM: patch command %04x failed (%d)", - hdev->name, opcode, err); - goto reset; - } - kfree_skb(skb); - } - - /* 250 msec delay after Launch Ram completes */ - msleep(250); - -reset: /* Reset */ err = btbcm_reset(hdev); if (err) - goto done; + return err; /* Read Local Version Info */ skb = btbcm_read_local_version(hdev); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - goto done; - } + if (IS_ERR(skb)) + return PTR_ERR(skb); ver = (struct hci_rp_read_local_version *)skb->data; rev = le16_to_cpu(ver->hci_rev); @@ -355,10 +368,7 @@ reset: set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); -done: - release_firmware(fw); - - return err; + return 0; } EXPORT_SYMBOL_GPL(btbcm_setup_patchram); diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h index 34268ae..eb6ab5f 100644 --- a/drivers/bluetooth/btbcm.h +++ b/drivers/bluetooth/btbcm.h @@ -25,6 +25,7 @@ int btbcm_check_bdaddr(struct hci_dev *hdev); int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr); +int btbcm_patchram(struct hci_dev *hdev, const char *firmware); int btbcm_setup_patchram(struct hci_dev *hdev); int btbcm_setup_apple(struct hci_dev *hdev); @@ -41,6 +42,11 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) return -EOPNOTSUPP; } +static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware) +{ + return -EOPNOTSUPP; +} + static inline int btbcm_setup_patchram(struct hci_dev *hdev) { return 0; -- cgit v0.10.2 From c0ba7acd48d122fe5941c8f402fc1ee024cac6fb Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 11 Apr 2015 05:35:37 -0700 Subject: Bluetooth: hci_uart: Reorder Atheros specific driver callbacks The driver callbacks in the Atheros support were all in a random order and did not help readability of this driver. So reorder them to make them aligned with what other Bluetooth UART drivers do. This patch is not changing any actual code. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 1b3f864..42f13d0 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -95,7 +95,6 @@ static void ath_hci_uart_work(struct work_struct *work) hci_uart_tx_wakeup(hu); } -/* Initialize protocol */ static int ath_open(struct hci_uart *hu) { struct ath_struct *ath; @@ -116,8 +115,7 @@ static int ath_open(struct hci_uart *hu) return 0; } -/* Flush protocol data */ -static int ath_flush(struct hci_uart *hu) +static int ath_close(struct hci_uart *hu) { struct ath_struct *ath = hu->priv; @@ -125,11 +123,17 @@ static int ath_flush(struct hci_uart *hu) skb_queue_purge(&ath->txq); + kfree_skb(ath->rx_skb); + + cancel_work_sync(&ath->ctxtsw); + + hu->priv = NULL; + kfree(ath); + return 0; } -/* Close protocol */ -static int ath_close(struct hci_uart *hu) +static int ath_flush(struct hci_uart *hu) { struct ath_struct *ath = hu->priv; @@ -137,19 +141,32 @@ static int ath_close(struct hci_uart *hu) skb_queue_purge(&ath->txq); - kfree_skb(ath->rx_skb); + return 0; +} - cancel_work_sync(&ath->ctxtsw); +static const struct h4_recv_pkt ath_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, +}; - hu->priv = NULL; - kfree(ath); +static int ath_recv(struct hci_uart *hu, const void *data, int count) +{ + struct ath_struct *ath = hu->priv; - return 0; + ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count, + ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts)); + if (IS_ERR(ath->rx_skb)) { + int err = PTR_ERR(ath->rx_skb); + BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); + return err; + } + + return count; } #define HCI_OP_ATH_SLEEP 0xFC04 -/* Enqueue frame for transmittion */ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) { struct ath_struct *ath = hu->priv; @@ -159,8 +176,7 @@ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) return 0; } - /* - * Update power management enable flag with parameters of + /* Update power management enable flag with parameters of * HCI sleep enable vendor specific HCI command. */ if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { @@ -190,37 +206,15 @@ static struct sk_buff *ath_dequeue(struct hci_uart *hu) return skb_dequeue(&ath->txq); } -static const struct h4_recv_pkt ath_recv_pkts[] = { - { H4_RECV_ACL, .recv = hci_recv_frame }, - { H4_RECV_SCO, .recv = hci_recv_frame }, - { H4_RECV_EVENT, .recv = hci_recv_frame }, -}; - -/* Recv data */ -static int ath_recv(struct hci_uart *hu, const void *data, int count) -{ - struct ath_struct *ath = hu->priv; - - ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count, - ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts)); - if (IS_ERR(ath->rx_skb)) { - int err = PTR_ERR(ath->rx_skb); - BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); - return err; - } - - return count; -} - static const struct hci_uart_proto athp = { .id = HCI_UART_ATH3K, .name = "ATH3K", .open = ath_open, .close = ath_close, + .flush = ath_flush, .recv = ath_recv, .enqueue = ath_enqueue, .dequeue = ath_dequeue, - .flush = ath_flush, }; int __init ath_init(void) -- cgit v0.10.2 From 4c876c0edbdc28de751dc4b4583dcbfc290a2293 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 11 Apr 2015 05:35:38 -0700 Subject: Bluetooth: hci_uart: Add Atheros support for address configuration The Atheros support for missing the support for configuration of the Bluetooth public address. Add support for the vendor specific command. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 42f13d0..ec8fa0e 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -144,6 +144,39 @@ static int ath_flush(struct hci_uart *hu) return 0; } +static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[10]; + int err; + + buf[0] = 0x01; + buf[1] = 0x01; + buf[2] = 0x00; + buf[3] = sizeof(bdaddr_t); + memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Change address command failed (%d)", + hdev->name, err); + return err; + } + kfree_skb(skb); + + return 0; +} + +static int ath_setup(struct hci_uart *hu) +{ + BT_DBG("hu %p", hu); + + hu->hdev->set_bdaddr = ath_set_bdaddr; + + return 0; +} + static const struct h4_recv_pkt ath_recv_pkts[] = { { H4_RECV_ACL, .recv = hci_recv_frame }, { H4_RECV_SCO, .recv = hci_recv_frame }, @@ -212,6 +245,7 @@ static const struct hci_uart_proto athp = { .open = ath_open, .close = ath_close, .flush = ath_flush, + .setup = ath_setup, .recv = ath_recv, .enqueue = ath_enqueue, .dequeue = ath_dequeue, -- cgit v0.10.2 From a2698a9bf9b0cfcf7e556946e04c4456a13a6f5a Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 16 Apr 2015 14:09:55 -0600 Subject: Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support Realtek ship a variety of bluetooth USB devices that identify themselves with standard USB Bluetooth device class values, but require a special driver to actually work. Without that driver, you never get any scan results. More recently however, Realtek appear to have wisened up and simply posted a firmware update that makes these devices comply with normal btusb protocols. The firmware needs to be uploaded on each boot. Based on Realtek code from https://github.com/lwfinger/rtl8723au_bt ('new' branch). This enables bluetooth support in the Gigabyte Brix GB-BXBT-2807 which has this RTL8723BE USB device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3410 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms There is no change to the USB descriptor after firmware update, however the version read by HCI_OP_READ_LOCAL_VERSION changes from 0x8723 to 0x3083. This has also been tested on RTL8723AE and RTL8821AE. Support for RTL8761A has also been added, but that is untested. Signed-off-by: Daniel Drake Tested-by: Larry Finger Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index de7b236..84f9985 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,7 @@ static struct usb_driver btusb_driver; #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 #define BTUSB_BCM_APPLE 0x10000 +#define BTUSB_REALTEK 0x20000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -288,6 +290,28 @@ static const struct usb_device_id blacklist_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE }, + /* Realtek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723AE Bluetooth devices */ + { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BE Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8821AE Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, + { } /* Terminating entry */ }; @@ -1345,6 +1369,378 @@ static int btusb_setup_csr(struct hci_dev *hdev) return ret; } +#define RTL_FRAG_LEN 252 + +struct rtl_download_cmd { + __u8 index; + __u8 data[RTL_FRAG_LEN]; +} __packed; + +struct rtl_download_response { + __u8 status; + __u8 index; +} __packed; + +struct rtl_rom_version_evt { + __u8 status; + __u8 version; +} __packed; + +struct rtl_epatch_header { + __u8 signature[8]; + __le32 fw_version; + __le16 num_patches; +} __packed; + +#define RTL_EPATCH_SIGNATURE "Realtech" +#define RTL_ROM_LMP_3499 0x3499 +#define RTL_ROM_LMP_8723A 0x1200 +#define RTL_ROM_LMP_8723B 0x8723 +#define RTL_ROM_LMP_8821A 0x8821 +#define RTL_ROM_LMP_8761A 0x8761 + +static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) +{ + struct rtl_rom_version_evt *rom_version; + struct sk_buff *skb; + int ret; + + /* Read RTL ROM version command */ + skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Read ROM version failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*rom_version)) { + BT_ERR("%s: RTL version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + rom_version = (struct rtl_rom_version_evt *)skb->data; + BT_INFO("%s: rom_version status=%x version=%x", + hdev->name, rom_version->status, rom_version->version); + + ret = rom_version->status; + if (ret == 0) + *version = rom_version->version; + + kfree_skb(skb); + return ret; +} + +static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, + const struct firmware *fw, + unsigned char **_buf) +{ + const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; + struct rtl_epatch_header *epatch_info; + unsigned char *buf; + int i, ret, len; + size_t min_size; + u8 opcode, length, data, rom_version = 0; + int project_id = -1; + const unsigned char *fwptr, *chip_id_base; + const unsigned char *patch_length_base, *patch_offset_base; + u32 patch_offset = 0; + u16 patch_length, num_patches; + const u16 project_id_to_lmp_subver[] = { + RTL_ROM_LMP_8723A, + RTL_ROM_LMP_8723B, + RTL_ROM_LMP_8821A, + RTL_ROM_LMP_8761A + }; + + ret = rtl_read_rom_version(hdev, &rom_version); + if (ret) + return -bt_to_errno(ret); + + min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; + if (fw->size < min_size) + return -EINVAL; + + fwptr = fw->data + fw->size - sizeof(extension_sig); + if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { + BT_ERR("%s: extension section signature mismatch", hdev->name); + return -EINVAL; + } + + /* Loop from the end of the firmware parsing instructions, until + * we find an instruction that identifies the "project ID" for the + * hardware supported by this firwmare file. + * Once we have that, we double-check that that project_id is suitable + * for the hardware we are working with. + */ + while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { + opcode = *--fwptr; + length = *--fwptr; + data = *--fwptr; + + BT_DBG("check op=%x len=%x data=%x", opcode, length, data); + + if (opcode == 0xff) /* EOF */ + break; + + if (length == 0) { + BT_ERR("%s: found instruction with length 0", + hdev->name); + return -EINVAL; + } + + if (opcode == 0 && length == 1) { + project_id = data; + break; + } + + fwptr -= length; + } + + if (project_id < 0) { + BT_ERR("%s: failed to find version instruction", hdev->name); + return -EINVAL; + } + + if (project_id > ARRAY_SIZE(project_id_to_lmp_subver)) { + BT_ERR("%s: unknown project id %d", hdev->name, project_id); + return -EINVAL; + } + + if (lmp_subver != project_id_to_lmp_subver[project_id]) { + BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, + project_id_to_lmp_subver[project_id], lmp_subver); + return -EINVAL; + } + + epatch_info = (struct rtl_epatch_header *)fw->data; + if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { + BT_ERR("%s: bad EPATCH signature", hdev->name); + return -EINVAL; + } + + num_patches = le16_to_cpu(epatch_info->num_patches); + BT_DBG("fw_version=%x, num_patches=%d", + le32_to_cpu(epatch_info->fw_version), num_patches); + + /* After the rtl_epatch_header there is a funky patch metadata section. + * Assuming 2 patches, the layout is: + * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 + * + * Find the right patch for this chip. + */ + min_size += 8 * num_patches; + if (fw->size < min_size) + return -EINVAL; + + chip_id_base = fw->data + sizeof(struct rtl_epatch_header); + patch_length_base = chip_id_base + (sizeof(u16) * num_patches); + patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); + for (i = 0; i < num_patches; i++) { + u16 chip_id = get_unaligned_le16(chip_id_base + + (i * sizeof(u16))); + if (chip_id == rom_version + 1) { + patch_length = get_unaligned_le16(patch_length_base + + (i * sizeof(u16))); + patch_offset = get_unaligned_le32(patch_offset_base + + (i * sizeof(u32))); + break; + } + } + + if (!patch_offset) { + BT_ERR("%s: didn't find patch for chip id %d", + hdev->name, rom_version); + return -EINVAL; + } + + BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); + min_size = patch_offset + patch_length; + if (fw->size < min_size) + return -EINVAL; + + /* Copy the firmware into a new buffer and write the version at + * the end. + */ + len = patch_length; + buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); + + *_buf = buf; + return len; +} + +static int rtl_download_firmware(struct hci_dev *hdev, + const unsigned char *data, int fw_len) +{ + struct rtl_download_cmd *dl_cmd; + int frag_num = fw_len / RTL_FRAG_LEN + 1; + int frag_len = RTL_FRAG_LEN; + int ret = 0; + int i; + + dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); + if (!dl_cmd) + return -ENOMEM; + + for (i = 0; i < frag_num; i++) { + struct rtl_download_response *dl_resp; + struct sk_buff *skb; + + BT_DBG("download fw (%d/%d)", i, frag_num); + + dl_cmd->index = i; + if (i == (frag_num - 1)) { + dl_cmd->index |= 0x80; /* data end */ + frag_len = fw_len % RTL_FRAG_LEN; + } + memcpy(dl_cmd->data, data, frag_len); + + /* Send download command */ + skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: download fw command failed (%ld)", + hdev->name, PTR_ERR(skb)); + ret = -PTR_ERR(skb); + goto out; + } + + if (skb->len != sizeof(*dl_resp)) { + BT_ERR("%s: download fw event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto out; + } + + dl_resp = (struct rtl_download_response *)skb->data; + if (dl_resp->status != 0) { + kfree_skb(skb); + ret = bt_to_errno(dl_resp->status); + goto out; + } + + kfree_skb(skb); + data += RTL_FRAG_LEN; + } + +out: + kfree(dl_cmd); + return ret; +} + +static int btusb_setup_rtl8723a(struct hci_dev *hdev) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); + ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); + return ret; + } + + if (fw->size < 8) { + ret = -EINVAL; + goto out; + } + + /* Check that the firmware doesn't have the epatch signature + * (which is only for RTL8723B and newer). + */ + if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { + BT_ERR("%s: unexpected EPATCH signature!", hdev->name); + ret = -EINVAL; + goto out; + } + + ret = rtl_download_firmware(hdev, fw->data, fw->size); + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, + const char *fw_name) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + unsigned char *fw_data = NULL; + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); + ret = request_firmware(&fw, fw_name, &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load %s", hdev->name, fw_name); + return ret; + } + + ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); + if (ret < 0) + goto out; + + ret = rtl_download_firmware(hdev, fw_data, ret); + kfree(fw_data); + if (ret < 0) + goto out; + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_realtek(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct hci_rp_read_local_version *resp; + u16 lmp_subver; + + skb = btusb_read_local_version(hdev); + if (IS_ERR(skb)) + return -PTR_ERR(skb); + + resp = (struct hci_rp_read_local_version *)skb->data; + BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, + resp->lmp_ver, resp->lmp_subver); + + lmp_subver = le16_to_cpu(resp->lmp_subver); + kfree_skb(skb); + + /* Match a set of subver values that correspond to stock firmware, + * which is not compatible with standard btusb. + * If matched, upload an alternative firmware that does conform to + * standard btusb. Once that firmware is uploaded, the subver changes + * to a different value. + */ + switch (lmp_subver) { + case RTL_ROM_LMP_8723A: + case RTL_ROM_LMP_3499: + return btusb_setup_rtl8723a(hdev); + case RTL_ROM_LMP_8723B: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8723b_fw.bin"); + case RTL_ROM_LMP_8821A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8821a_fw.bin"); + case RTL_ROM_LMP_8761A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8761a_fw.bin"); + default: + BT_INFO("rtl: assuming no firmware upload needed."); + return 0; + } +} + static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, struct intel_version *ver) { @@ -2776,6 +3172,9 @@ static int btusb_probe(struct usb_interface *intf, hdev->set_bdaddr = btusb_set_bdaddr_ath3012; } + if (id->driver_info & BTUSB_REALTEK) + hdev->setup = btusb_setup_realtek; + if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL; -- cgit v0.10.2 From eb50042fd2a9ed3cecc8f9e6799b8e11b4726f94 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 16 Apr 2015 23:15:50 +0200 Subject: Bluetooth: btusb: Fix two coding style issues ERROR: spaces required around that '<' (ctx:WxV) + if (err <0) ^ ERROR: code indent should use tabs where possible +^I^I^I^I sizeof(ver));$ Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 84f9985..920f6fb 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -916,7 +916,7 @@ static int btusb_open(struct hci_dev *hdev) */ if (data->setup_on_usb) { err = data->setup_on_usb(hdev); - if (err <0) + if (err < 0) return err; } @@ -2973,7 +2973,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) int i, err; err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, - sizeof(ver)); + sizeof(ver)); if (err < 0) return err; -- cgit v0.10.2 From c57ddfaea6ec8b1d96f863f7fcfc5554b5dc44c7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 20 Apr 2015 18:51:35 +0300 Subject: Bluetooth: btusb: off by one in rtl8723b_parse_firmware() The ">" should be ">=" so that we don't read past the end of the array. Fixes: 9d9a113e3695 ('Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support') Signed-off-by: Dan Carpenter Reviewed-by: Daniel Drake Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 920f6fb..d21f3b4 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1502,7 +1502,7 @@ static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, return -EINVAL; } - if (project_id > ARRAY_SIZE(project_id_to_lmp_subver)) { + if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { BT_ERR("%s: unknown project id %d", hdev->name, project_id); return -EINVAL; } -- cgit v0.10.2 From 68fc378ce332cc4efd7f314d3e6e15e83f53ebf2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 30 Apr 2015 15:13:14 +1000 Subject: Revert "powerpc/tm: Abort syscalls in active transactions" This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index ba0a2a4..ded6979 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -74,23 +74,22 @@ Causes of transaction aborts Syscalls ======== -Syscalls made from within an active transaction will not be performed and the -transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL -| TM_CAUSE_PERSISTENT. +Performing syscalls from within transaction is not recommended, and can lead +to unpredictable results. -Syscalls made from within a suspended transaction are performed as normal and -the transaction is not explicitly doomed by the kernel. However, what the -kernel does to perform the syscall may result in the transaction being doomed -by the hardware. The syscall is performed in suspended mode so any side -effects will be persistent, independent of transaction success or failure. No -guarantees are provided by the kernel about which syscalls will affect -transaction success. +Syscalls do not by design abort transactions, but beware: The kernel code will +not be running in transactional state. The effect of syscalls will always +remain visible, but depending on the call they may abort your transaction as a +side-effect, read soon-to-be-aborted transactional data that should not remain +invisible, etc. If you constantly retry a transaction that constantly aborts +itself by calling a syscall, you'll have a livelock & make no progress. -Care must be taken when relying on syscalls to abort during active transactions -if the calls are made via a library. Libraries may cache values (which may -give the appearance of success) or perform operations that cause transaction -failure before entering the kernel (which may produce different failure codes). -Examples are glibc's getpid() and lazy symbol resolution. +Simple syscalls (e.g. sigprocmask()) "could" be OK. Even things like write() +from, say, printf() should be OK as long as the kernel does not access any +memory that was accessed transactionally. + +Consider any syscalls that happen to work as debug-only -- not recommended for +production use. Best to queue them up till after the transaction is over. Signals @@ -177,7 +176,8 @@ kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. TM_CAUSE_TLBI Software TLB invalid. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. - TM_CAUSE_SYSCALL Syscall from active transaction. + TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort + transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. TM_CAUSE_ALIGNMENT Alignment fault. diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h index 5047659..5d836b7 100644 --- a/arch/powerpc/include/uapi/asm/tm.h +++ b/arch/powerpc/include/uapi/asm/tm.h @@ -11,7 +11,7 @@ #define TM_CAUSE_RESCHED 0xde #define TM_CAUSE_TLBI 0xdc #define TM_CAUSE_FAC_UNAV 0xda -#define TM_CAUSE_SYSCALL 0xd8 +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_SIGNAL 0xd4 #define TM_CAUSE_ALIGNMENT 0xd2 diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 8ca9434..afbc200 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -34,7 +34,6 @@ #include #include #include -#include /* * System calls. @@ -146,24 +145,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) andi. r11,r10,_TIF_SYSCALL_DOTRACE bne syscall_dotrace .Lsyscall_dotrace_cont: -#ifdef CONFIG_PPC_TRANSACTIONAL_MEM -BEGIN_FTR_SECTION - b 1f -END_FTR_SECTION_IFCLR(CPU_FTR_TM) - extrdi. r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */ - beq+ 1f - - /* Doom the transaction and don't perform the syscall: */ - mfmsr r11 - li r12, 1 - rldimi r11, r12, MSR_TM_LG, 63-MSR_TM_LG - mtmsrd r11, 0 - li r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT) - TABORT(R11) - - b .Lsyscall_exit -1: -#endif cmpldi 0,r0,NR_syscalls bge- syscall_enosys diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile index 1b616fa..6bff955 100644 --- a/tools/testing/selftests/powerpc/tm/Makefile +++ b/tools/testing/selftests/powerpc/tm/Makefile @@ -1,4 +1,4 @@ -TEST_PROGS := tm-resched-dscr tm-syscall +TEST_PROGS := tm-resched-dscr all: $(TEST_PROGS) -- cgit v0.10.2 From 409e718e09885de78cebcb57f0f908eaed5304df Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Fri, 13 Mar 2015 21:49:09 +0530 Subject: axp288_fuel_gauge: Add original author details Add the original author details of the axp288_fuel_gauge driver. Signed-off-by: Ramakrishna Pallala Acked-by: Todd Brandt Signed-off-by: Sebastian Reichel diff --git a/drivers/power/axp288_fuel_gauge.c b/drivers/power/axp288_fuel_gauge.c index ca1cc5a..bd1dbfe 100644 --- a/drivers/power/axp288_fuel_gauge.c +++ b/drivers/power/axp288_fuel_gauge.c @@ -1149,6 +1149,7 @@ static struct platform_driver axp288_fuel_gauge_driver = { module_platform_driver(axp288_fuel_gauge_driver); +MODULE_AUTHOR("Ramakrishna Pallala "); MODULE_AUTHOR("Todd Brandt "); MODULE_DESCRIPTION("Xpower AXP288 Fuel Gauge Driver"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 2a6afddb6656aefbc6e8d6ef1f95749895ae2945 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sun, 29 Mar 2015 15:35:54 +0200 Subject: MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I'm author of two of those drivers (bq2415x and rx51) and I added more patches for other twos. Also I fished (proper) open source power management software for Nokia N900 and those kernel drivers are part of it. Signed-off-by: Pali Rohár Signed-off-by: Sebastian Reichel diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0..e991978 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6943,6 +6943,17 @@ T: git git://git.rocketboards.org/linux-socfpga-next.git S: Maintained F: arch/nios2/ +NOKIA N900 POWER SUPPLY DRIVERS +M: Pali Rohár +S: Maintained +F: include/linux/power/bq2415x_charger.h +F: include/linux/power/bq27x00_battery.h +F: include/linux/power/isp1704_charger.h +F: drivers/power/bq2415x_charger.c +F: drivers/power/bq27x00_battery.c +F: drivers/power/isp1704_charger.c +F: drivers/power/rx51_battery.c + NTB DRIVER M: Jon Mason M: Dave Jiang -- cgit v0.10.2 From 932df43005389300a3336421e4aedb25390ae144 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 Apr 2015 20:19:43 +0800 Subject: power/reset: at91: fix return value check in at91_reset_platform_probe() In case of error, the function devm_ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecfe64d8c55f ("power: reset: Add AT91 reset driver") Signed-off-by: Wei Yongjun Signed-off-by: Sebastian Reichel diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c index 01c7055..ca461eb 100644 --- a/drivers/power/reset/at91-reset.c +++ b/drivers/power/reset/at91-reset.c @@ -212,9 +212,9 @@ static int at91_reset_platform_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 ); at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (IS_ERR(at91_ramc_base[idx])) { + if (!at91_ramc_base[idx]) { dev_err(&pdev->dev, "Could not map ram controller address\n"); - return PTR_ERR(at91_ramc_base[idx]); + return -ENOMEM; } } -- cgit v0.10.2 From ce992369cf29a8762b46338756ef5aba35774981 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 27 Apr 2015 20:15:43 +0300 Subject: power_supply: fix oops in collie_battery driver Fix an oops happening due to typo in 297d716f6260cc9421d971b124ca196b957ee [power_supply: Change ownership from driver to core]. Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0004000 [00000050] *pgd=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc1+ #35 Hardware name: Sharp-Collie task: c381a720 ti: c381e000 task.ti: c381e000 PC is at collie_bat_get_property+0x10/0x258 LR is at collie_bat_get_property+0x10/0x258 pc : [] lr : [] psr: 20000013 sp : c381fd60 ip : 00000001 fp : 00000000 r10: c37b84c0 r9 : c068c9b8 r8 : c37b84a0 r7 : c37b84c0 r6 : c381fd84 r5 : 00000000 r4 : 00000000 r3 : c0369380 r2 : c381fd84 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: c3784000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc381e190) Stack: (0xc381fd60 to 0xc3820000) fd60: c0369380 00000000 c37c0000 c068c9b8 c37b84c0 c0234380 00000000 c0234bc0 fd80: c042fcec c37b84a0 c0357c64 00000000 c37b84c0 c37c0000 c37b84a0 c0234e98 fda0: c37be020 00000000 ff0a0004 c37b84c8 c37be020 c37b84c0 c042fcec c383dbc0 fdc0: c0364060 00000000 00000000 c01be6a8 00000000 c015b220 c37b84c8 c381fdf0 fde0: c37b84c8 c37b84c8 c37b84c8 c37be020 c041e278 c015b478 c04a45b4 c0045290 fe00: c381a720 c0345d50 00000001 c37bf020 c0e511d8 c00453c0 c0688058 c37b84c8 fe20: 00000000 c37b84c0 c37780c0 c0e511d8 c38e2f60 c0e52d24 c04a45b4 c01be134 fe40: c37b8550 c37b8550 00000000 c0347a8c c37b84a0 00000000 c37b84c0 c0369380 fe60: c37780c0 00000001 00000061 c02347a0 00000001 c0e52e6c c068d144 c37b77a0 fe80: 00000000 c068d164 00000000 c0235b3c 00000000 c067fbb4 00000000 c068d1e4 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 c37b77a0 c068d144 fec0: c3778020 c06953c0 c049de68 c01d5f54 c0688800 c3778020 c068d144 c0688700 fee0: c06953c0 c01d6000 c0675b80 c0675b80 c37b77a0 c0009624 c381a720 c000d8dc ff00: 00000001 c381ff54 c048a500 c00453c0 c00095a0 20000153 ffffffff c000d8dc ff20: c049cbd0 00000001 c04aa064 00000007 c04a9fb0 00000006 c06953c0 c06953c0 ff40: c048a590 c04a45c0 c04a9ffc 00000006 c06953c0 c06953c0 c048a590 c04a45c0 ff60: 00000061 c048adf8 00000006 00000006 c048a590 c0036450 00000001 00000000 ff80: c00363ec 00000000 c033ee7c 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 c033ee84 00000000 c000a3c8 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [] (collie_bat_get_property) from [] (power_supply_get_property+0x1c/0x28) [] (power_supply_get_property) from [] (power_supply_show_property+0x50/0x1dc) [] (power_supply_show_property) from [] (power_supply_uevent+0x9c/0x1cc) [] (power_supply_uevent) from [] (dev_uevent+0xb4/0x1d0) [] (dev_uevent) from [] (kobject_uevent_env+0x1cc/0x4f8) [] (kobject_uevent_env) from [] (device_add+0x374/0x524) [] (device_add) from [] (__power_supply_register+0x120/0x180) [] (__power_supply_register) from [] (collie_bat_probe+0xe8/0x1b4) [] (collie_bat_probe) from [] (ucb1x00_add_dev+0x30/0x88) [] (ucb1x00_add_dev) from [] (ucb1x00_register_driver+0x54/0x78) [] (ucb1x00_register_driver) from [] (do_one_initcall+0x84/0x1f4) [] (do_one_initcall) from [] (kernel_init_freeable+0xf8/0x1b4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xec) [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) Code: e92d40f8 e1a05001 e1a06002 ebfff9bc (e5903050) ---[ end trace 447ee06b251d66b2 ]--- Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Sebastian Reichel diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c index 2da9ed8..8a971b3 100644 --- a/drivers/power/collie_battery.c +++ b/drivers/power/collie_battery.c @@ -347,7 +347,7 @@ static int collie_bat_probe(struct ucb1x00_dev *dev) goto err_psy_reg_main; } - psy_main_cfg.drv_data = &collie_bat_bu; + psy_bu_cfg.drv_data = &collie_bat_bu; collie_bat_bu.psy = power_supply_register(&dev->ucb->dev, &collie_bat_bu_desc, &psy_bu_cfg); -- cgit v0.10.2 From d8818257d3befce6ce7da4c09112654914c3fd58 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 14 Apr 2015 21:09:20 +0000 Subject: power: reset: ltc2952: Remove bogus hrtimer_start() return value checks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The return value of hrtimer_start() tells whether the timer was inactive or active already when hrtimer_start() was called. The code emits a bogus warning if the timer was active already claiming that the timer could not be started. Remove it. Signed-off-by: Thomas Gleixner Cc: Sebastian Reichel Cc: Dmitry Eremin-Solenikov Cc: David Woodhouse Cc: Frans Klaver Cc: "René Moll" Cc: Wolfram Sang Cc: linux-pm@vger.kernel.org Acked-by: Frans Klaver Signed-off-by: Sebastian Reichel diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c index 7ef193b..1e08195 100644 --- a/drivers/power/reset/ltc2952-poweroff.c +++ b/drivers/power/reset/ltc2952-poweroff.c @@ -120,18 +120,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer) static void ltc2952_poweroff_start_wde(struct ltc2952_poweroff *data) { - if (hrtimer_start(&data->timer_wde, data->wde_interval, - HRTIMER_MODE_REL)) { - /* - * The device will not toggle the watchdog reset, - * thus shut down is only safe if the PowerPath controller - * has a long enough time-off before triggering a hardware - * power-off. - * - * Only sending a warning as the system will power-off anyway - */ - dev_err(data->dev, "unable to start the timer\n"); - } + hrtimer_start(&data->timer_wde, data->wde_interval, HRTIMER_MODE_REL); } static enum hrtimer_restart @@ -165,9 +154,8 @@ static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id) } if (gpiod_get_value(data->gpio_trigger)) { - if (hrtimer_start(&data->timer_trigger, data->trigger_delay, - HRTIMER_MODE_REL)) - dev_err(data->dev, "unable to start the wait timer\n"); + hrtimer_start(&data->timer_trigger, data->trigger_delay, + HRTIMER_MODE_REL); } else { hrtimer_cancel(&data->timer_trigger); /* omitting return value check, timer should have been valid */ -- cgit v0.10.2 From d24d81444f8caf1895256ef2d2e89ae8202a17e4 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sun, 26 Apr 2015 20:51:50 +0200 Subject: Bluetooth: Skip the shutdown routine if the interface is not up Most likely, the shutdown routine requires the interface to be up. This is the case for BTUSB_INTEL: the routine tries to send a command to the interface, but since this one is down, it fails and exits once HCI_INIT_TIMEOUT has expired. Signed-off-by: Gabriele Mazzotta Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org # 4.0.x diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 476709b..4663c3d 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1557,7 +1557,8 @@ static int hci_dev_do_close(struct hci_dev *hdev) { BT_DBG("%s %p", hdev->name, hdev); - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER)) { + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + test_bit(HCI_UP, &hdev->flags)) { /* Execute vendor specific shutdown routine */ if (hdev->shutdown) hdev->shutdown(hdev); -- cgit v0.10.2 From 2b4d413c3871af0f2ccd466fb6581ed2c2d89438 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:53 +0200 Subject: mac802154: fix ieee802154_register_hw error handling Currently if ieee802154_if_add failed, we don't unregister the wpan phy which was registered before. This patch adds a correct error handling for unregister the wpan phy when ieee802154_if_add failed. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/net/mac802154/main.c b/net/mac802154/main.c index 8500378..beece7b 100644 --- a/net/mac802154/main.c +++ b/net/mac802154/main.c @@ -166,13 +166,15 @@ int ieee802154_register_hw(struct ieee802154_hw *hw) if (IS_ERR(dev)) { rtnl_unlock(); rc = PTR_ERR(dev); - goto out_wq; + goto out_phy; } rtnl_unlock(); return 0; +out_phy: + wpan_phy_unregister(local->phy); out_wq: destroy_workqueue(local->workqueue); out: -- cgit v0.10.2 From 89eb6d0677a6daf134015bc7bd5ec1432911eed2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 30 Apr 2015 17:44:54 +0200 Subject: mac802154: llsec: fix return value check in llsec_key_alloc() In case of error, the functions crypto_alloc_aead() and crypto_alloc_blkcipher() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/net/mac802154/llsec.c b/net/mac802154/llsec.c index dcf7395..5b2be12 100644 --- a/net/mac802154/llsec.c +++ b/net/mac802154/llsec.c @@ -134,7 +134,7 @@ llsec_key_alloc(const struct ieee802154_llsec_key *template) for (i = 0; i < ARRAY_SIZE(key->tfm); i++) { key->tfm[i] = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC); - if (!key->tfm[i]) + if (IS_ERR(key->tfm[i])) goto err_tfm; if (crypto_aead_setkey(key->tfm[i], template->key, IEEE802154_LLSEC_KEY_SIZE)) @@ -144,7 +144,7 @@ llsec_key_alloc(const struct ieee802154_llsec_key *template) } key->tfm0 = crypto_alloc_blkcipher("ctr(aes)", 0, CRYPTO_ALG_ASYNC); - if (!key->tfm0) + if (IS_ERR(key->tfm0)) goto err_tfm; if (crypto_blkcipher_setkey(key->tfm0, template->key, -- cgit v0.10.2 From 42fb23e2f57accbed69804e6d72ea3a88b8a84c4 Mon Sep 17 00:00:00 2001 From: Varka Bhadram Date: Thu, 30 Apr 2015 17:44:52 +0200 Subject: mac802154: add description to mac802154 APIs This patch adds the proper description to the mac802154 core APIs. Signed-off-by: Varka Bhadram Acked-by: Alexander Aring Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/include/net/mac802154.h b/include/net/mac802154.h index e18e7fd..7df28a4 100644 --- a/include/net/mac802154.h +++ b/include/net/mac802154.h @@ -247,19 +247,109 @@ static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src) __put_unaligned_memmove64(swab64p(le64_src), be64_dst); } -/* Basic interface to register ieee802154 device */ +/** + * ieee802154_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac802154 allocates a private data area for the driver pointed to by + * @priv in &struct ieee802154_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. + */ struct ieee802154_hw * ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops); + +/** + * ieee802154_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee802154_unregister_hw() + * before calling this function. + * + * @hw: the hardware to free + */ void ieee802154_free_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_register_hw - Register hardware device + * + * You must call this function before any other functions in + * mac802154. Note that before a hardware can be registered, you + * need to fill the contained wpan_phy's information. + * + * @hw: the device to register as returned by ieee802154_alloc_hw() + * + * Return: 0 on success. An error code otherwise. + */ int ieee802154_register_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_unregister_hw - Unregister a hardware device + * + * This function instructs mac802154 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ void ieee802154_unregister_hw(struct ieee802154_hw *hw); +/** + * ieee802154_rx - receive frame + * + * Use this function to hand received frames to mac802154. The receive + * buffer in @skb must start with an IEEE 802.15.4 header. In case of a + * paged @skb is used, the driver is recommended to put the ieee802154 + * header of the frame on the linear part of the @skb to avoid memory + * allocation and/or memcpy by the stack. + * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + */ void ieee802154_rx(struct ieee802154_hw *hw, struct sk_buff *skb); + +/** + * ieee802154_rx_irqsafe - receive frame + * + * Like ieee802154_rx() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + * @lqi: link quality indicator + */ void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi); - +/** + * ieee802154_wake_queue - wake ieee802154 queue + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * + * Drivers should use this function instead of netif_wake_queue. + */ void ieee802154_wake_queue(struct ieee802154_hw *hw); + +/** + * ieee802154_stop_queue - stop ieee802154 queue + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * + * Drivers should use this function instead of netif_stop_queue. + */ void ieee802154_stop_queue(struct ieee802154_hw *hw); + +/** + * ieee802154_xmit_complete - frame transmission complete + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @ifs_handling: indicate interframe space handling + */ void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling); -- cgit v0.10.2 From 1cc800e7aabb40e2d8ffc3d259e6a153007fa9eb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Guido=20G=C3=BCnther?= Date: Thu, 30 Apr 2015 17:44:55 +0200 Subject: ieee802154: Add trace events for rdev->ops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enabling tracing via echo 1 > /sys/kernel/debug/tracing/events/cfg802154/enable enables event tracing like iwpan dev wpan0 set pan_id 0xbeef cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:1 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | iwpan-2663 [000] .... 170.369142: 802154_rdev_set_pan_id: phy0, wpan_dev(1), pan id: 0xbeef iwpan-2663 [000] .... 170.369177: 802154_rdev_return_int: phy0, returned: 0 Signed-off-by: Guido Günther Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile index 05dab29..4adfd4d 100644 --- a/net/ieee802154/Makefile +++ b/net/ieee802154/Makefile @@ -3,7 +3,9 @@ obj-$(CONFIG_IEEE802154_SOCKET) += ieee802154_socket.o obj-y += 6lowpan/ ieee802154-y := netlink.o nl-mac.o nl-phy.o nl_policy.o core.o \ - header_ops.o sysfs.o nl802154.o + header_ops.o sysfs.o nl802154.o trace.o ieee802154_socket-y := socket.o +CFLAGS_trace.o := -I$(src) + ccflags-y += -D__CHECK_ENDIAN__ diff --git a/net/ieee802154/rdev-ops.h b/net/ieee802154/rdev-ops.h index 7c46732..624413e 100644 --- a/net/ieee802154/rdev-ops.h +++ b/net/ieee802154/rdev-ops.h @@ -4,6 +4,7 @@ #include #include "core.h" +#include "trace.h" static inline struct net_device * rdev_add_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, @@ -24,73 +25,127 @@ static inline int rdev_add_virtual_intf(struct cfg802154_registered_device *rdev, char *name, enum nl802154_iftype type, __le64 extended_addr) { - return rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + int ret; + + trace_802154_rdev_add_virtual_intf(&rdev->wpan_phy, name, type, extended_addr); + ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + extended_addr); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_del_virtual_intf(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev) { - return rdev->ops->del_virtual_intf(&rdev->wpan_phy, wpan_dev); + int ret; + + trace_802154_rdev_del_virtual_intf(&rdev->wpan_phy, wpan_dev); + ret = rdev->ops->del_virtual_intf(&rdev->wpan_phy, wpan_dev); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_channel(struct cfg802154_registered_device *rdev, u8 page, u8 channel) { - return rdev->ops->set_channel(&rdev->wpan_phy, page, channel); + int ret; + + trace_802154_rdev_set_channel(&rdev->wpan_phy, page, channel); + ret = rdev->ops->set_channel(&rdev->wpan_phy, page, channel); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_cca_mode(struct cfg802154_registered_device *rdev, const struct wpan_phy_cca *cca) { - return rdev->ops->set_cca_mode(&rdev->wpan_phy, cca); + int ret; + + trace_802154_rdev_set_cca_mode(&rdev->wpan_phy, cca); + ret = rdev->ops->set_cca_mode(&rdev->wpan_phy, cca); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_pan_id(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, __le16 pan_id) { - return rdev->ops->set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + int ret; + + trace_802154_rdev_set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + ret = rdev->ops->set_pan_id(&rdev->wpan_phy, wpan_dev, pan_id); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_short_addr(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, __le16 short_addr) { - return rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + int ret; + + trace_802154_rdev_set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + ret = rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_backoff_exponent(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, u8 min_be, u8 max_be) { - return rdev->ops->set_backoff_exponent(&rdev->wpan_phy, wpan_dev, + int ret; + + trace_802154_rdev_set_backoff_exponent(&rdev->wpan_phy, wpan_dev, min_be, max_be); + ret = rdev->ops->set_backoff_exponent(&rdev->wpan_phy, wpan_dev, + min_be, max_be); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_max_csma_backoffs(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, u8 max_csma_backoffs) { - return rdev->ops->set_max_csma_backoffs(&rdev->wpan_phy, wpan_dev, - max_csma_backoffs); + int ret; + + trace_802154_rdev_set_csma_backoffs(&rdev->wpan_phy, wpan_dev, + max_csma_backoffs); + ret = rdev->ops->set_max_csma_backoffs(&rdev->wpan_phy, wpan_dev, + max_csma_backoffs); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_max_frame_retries(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, s8 max_frame_retries) { - return rdev->ops->set_max_frame_retries(&rdev->wpan_phy, wpan_dev, + int ret; + + trace_802154_rdev_set_max_frame_retries(&rdev->wpan_phy, wpan_dev, max_frame_retries); + ret = rdev->ops->set_max_frame_retries(&rdev->wpan_phy, wpan_dev, + max_frame_retries); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } static inline int rdev_set_lbt_mode(struct cfg802154_registered_device *rdev, struct wpan_dev *wpan_dev, bool mode) { - return rdev->ops->set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + int ret; + + trace_802154_rdev_set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + ret = rdev->ops->set_lbt_mode(&rdev->wpan_phy, wpan_dev, mode); + trace_802154_rdev_return_int(&rdev->wpan_phy, ret); + return ret; } #endif /* __CFG802154_RDEV_OPS */ diff --git a/net/ieee802154/trace.c b/net/ieee802154/trace.c new file mode 100644 index 0000000..95f997f --- /dev/null +++ b/net/ieee802154/trace.c @@ -0,0 +1,7 @@ +#include + +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "trace.h" + +#endif diff --git a/net/ieee802154/trace.h b/net/ieee802154/trace.h new file mode 100644 index 0000000..8ed9f97 --- /dev/null +++ b/net/ieee802154/trace.h @@ -0,0 +1,246 @@ +/* Based on net/wireless/tracing.h */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM cfg802154 + +#if !defined(__RDEV_CFG802154_OPS_TRACE) || defined(TRACE_HEADER_MULTI_READ) +#define __RDEV_CFG802154_OPS_TRACE + +#include + +#include + +#define MAXNAME 32 +#define WPAN_PHY_ENTRY __array(char, wpan_phy_name, MAXNAME) +#define WPAN_PHY_ASSIGN strlcpy(__entry->wpan_phy_name, \ + wpan_phy_name(wpan_phy), \ + MAXNAME) +#define WPAN_PHY_PR_FMT "%s" +#define WPAN_PHY_PR_ARG __entry->wpan_phy_name + +#define WPAN_DEV_ENTRY __field(u32, identifier) +#define WPAN_DEV_ASSIGN (__entry->identifier) = (!IS_ERR_OR_NULL(wpan_dev) \ + ? wpan_dev->identifier : 0) +#define WPAN_DEV_PR_FMT "wpan_dev(%u)" +#define WPAN_DEV_PR_ARG (__entry->identifier) + +#define WPAN_CCA_ENTRY __field(enum nl802154_cca_modes, cca_mode) \ + __field(enum nl802154_cca_opts, cca_opt) +#define WPAN_CCA_ASSIGN \ + do { \ + (__entry->cca_mode) = cca->mode; \ + (__entry->cca_opt) = cca->opt; \ + } while (0) +#define WPAN_CCA_PR_FMT "cca_mode: %d, cca_opt: %d" +#define WPAN_CCA_PR_ARG __entry->cca_mode, __entry->cca_opt + +#define BOOL_TO_STR(bo) (bo) ? "true" : "false" + +/************************************************************* + * rdev->ops traces * + *************************************************************/ + +TRACE_EVENT(802154_rdev_add_virtual_intf, + TP_PROTO(struct wpan_phy *wpan_phy, char *name, + enum nl802154_iftype type, __le64 extended_addr), + TP_ARGS(wpan_phy, name, type, extended_addr), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __string(vir_intf_name, name ? name : "") + __field(enum nl802154_iftype, type) + __field(__le64, extended_addr) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __assign_str(vir_intf_name, name ? name : ""); + __entry->type = type; + __entry->extended_addr = extended_addr; + ), + TP_printk(WPAN_PHY_PR_FMT ", virtual intf name: %s, type: %d, ea %llx", + WPAN_PHY_PR_ARG, __get_str(vir_intf_name), __entry->type, + __entry->extended_addr) +); + +TRACE_EVENT(802154_rdev_del_virtual_intf, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev), + TP_ARGS(wpan_phy, wpan_dev), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT, WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG) +); + +TRACE_EVENT(802154_rdev_set_channel, + TP_PROTO(struct wpan_phy *wpan_phy, u8 page, u8 channel), + TP_ARGS(wpan_phy, page, channel), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __field(u8, page) + __field(u8, channel) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __entry->page = page; + __entry->channel = channel; + ), + TP_printk(WPAN_PHY_PR_FMT ", page: %d, channel: %d", WPAN_PHY_PR_ARG, + __entry->page, __entry->channel) +); + +TRACE_EVENT(802154_rdev_set_cca_mode, + TP_PROTO(struct wpan_phy *wpan_phy, const struct wpan_phy_cca *cca), + TP_ARGS(wpan_phy, cca), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_CCA_ENTRY + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_CCA_ASSIGN; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_CCA_PR_FMT, WPAN_PHY_PR_ARG, + WPAN_CCA_PR_ARG) +); + +DECLARE_EVENT_CLASS(802154_le16_template, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(__le16, le16arg) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->le16arg = le16arg; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", pan id: 0x%04x", + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, + __le16_to_cpu(__entry->le16arg)) +); + +DEFINE_EVENT(802154_le16_template, 802154_rdev_set_pan_id, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg) +); + +DEFINE_EVENT_PRINT(802154_le16_template, 802154_rdev_set_short_addr, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + __le16 le16arg), + TP_ARGS(wpan_phy, wpan_dev, le16arg), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", sa: 0x%04x", + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, __entry->le16arg) +); + +TRACE_EVENT(802154_rdev_set_backoff_exponent, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + u8 min_be, u8 max_be), + TP_ARGS(wpan_phy, wpan_dev, min_be, max_be), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(u8, min_be) + __field(u8, max_be) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->min_be = min_be; + __entry->max_be = max_be; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", min be: %d, max_be: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->min_be, __entry->max_be) +); + +TRACE_EVENT(802154_rdev_set_csma_backoffs, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + u8 max_csma_backoffs), + TP_ARGS(wpan_phy, wpan_dev, max_csma_backoffs), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(u8, max_csma_backoffs) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->max_csma_backoffs = max_csma_backoffs; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", max csma backoffs: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->max_csma_backoffs) +); + +TRACE_EVENT(802154_rdev_set_max_frame_retries, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + s8 max_frame_retries), + TP_ARGS(wpan_phy, wpan_dev, max_frame_retries), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(s8, max_frame_retries) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->max_frame_retries = max_frame_retries; + ), + + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", max frame retries: %d", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, __entry->max_frame_retries) +); + +TRACE_EVENT(802154_rdev_set_lbt_mode, + TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, + bool mode), + TP_ARGS(wpan_phy, wpan_dev, mode), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + WPAN_DEV_ENTRY + __field(bool, mode) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + WPAN_DEV_ASSIGN; + __entry->mode = mode; + ), + TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT + ", lbt mode: %s", WPAN_PHY_PR_ARG, + WPAN_DEV_PR_ARG, BOOL_TO_STR(__entry->mode)) +); + +TRACE_EVENT(802154_rdev_return_int, + TP_PROTO(struct wpan_phy *wpan_phy, int ret), + TP_ARGS(wpan_phy, ret), + TP_STRUCT__entry( + WPAN_PHY_ENTRY + __field(int, ret) + ), + TP_fast_assign( + WPAN_PHY_ASSIGN; + __entry->ret = ret; + ), + TP_printk(WPAN_PHY_PR_FMT ", returned: %d", WPAN_PHY_PR_ARG, + __entry->ret) +); + +#endif /* !__RDEV_CFG802154_OPS_TRACE || TRACE_HEADER_MULTI_READ */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace +#include -- cgit v0.10.2 From 4748e86ecf262ae9d94b7e4073653554951ceb7a Mon Sep 17 00:00:00 2001 From: Christoffer Holmstedt Date: Thu, 30 Apr 2015 17:44:56 +0200 Subject: at86rf230: Add macro for TRX STATE MASK Instead of using the 'magic' number of 0x1f the TRX_STATE_MASK macro is introduced. Signed-off-by: Christoffer Holmstedt Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 3802665..684488a 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -292,6 +292,8 @@ struct at86rf230_local { #define STATE_BUSY_RX_AACK_NOCLK 0x1E #define STATE_TRANSITION_IN_PROGRESS 0x1F +#define TRX_STATE_MASK (0x1F) + #define AT86RF2XX_NUMREGS 0x3F static void @@ -509,7 +511,7 @@ at86rf230_async_state_assert(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; const u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; /* Assert state change */ if (trx_state != ctx->to_state) { @@ -667,7 +669,7 @@ at86rf230_async_state_change_start(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; int rc; /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */ -- cgit v0.10.2 From 5b4a10390460cccf17a9fac739e153d68cf25ef5 Mon Sep 17 00:00:00 2001 From: Varka Bhadram Date: Thu, 30 Apr 2015 17:44:57 +0200 Subject: cfg802154: pass name_assign_type to rdev_add_virtual_intf() This code is based on commit 6bab2e19c5ffd ("cfg80211: pass name_assign_type to rdev_add_virtual_intf()") This will expose in sysfs whether the ifname of a IEEE-802.15.4 device is set by userspace or generated by the kernel. We are using two types of name_assign_types o NET_NAME_ENUM: Default interface name provided by kernel o NET_NAME_USER: Interface name provided by user. Signed-off-by: Varka Bhadram Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h index eeda676..6ea16c8 100644 --- a/include/net/cfg802154.h +++ b/include/net/cfg802154.h @@ -30,11 +30,13 @@ struct wpan_phy_cca; struct cfg802154_ops { struct net_device * (*add_virtual_intf_deprecated)(struct wpan_phy *wpan_phy, const char *name, + unsigned char name_assign_type, int type); void (*del_virtual_intf_deprecated)(struct wpan_phy *wpan_phy, struct net_device *dev); int (*add_virtual_intf)(struct wpan_phy *wpan_phy, const char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr); int (*del_virtual_intf)(struct wpan_phy *wpan_phy, diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c index 1b9d25f6..346c666 100644 --- a/net/ieee802154/nl-phy.c +++ b/net/ieee802154/nl-phy.c @@ -175,6 +175,7 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) int rc = -ENOBUFS; struct net_device *dev; int type = __IEEE802154_DEV_INVALID; + unsigned char name_assign_type; pr_debug("%s\n", __func__); @@ -190,8 +191,10 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) if (devname[nla_len(info->attrs[IEEE802154_ATTR_DEV_NAME]) - 1] != '\0') return -EINVAL; /* phy name should be null-terminated */ + name_assign_type = NET_NAME_USER; } else { devname = "wpan%d"; + name_assign_type = NET_NAME_ENUM; } if (strlen(devname) >= IFNAMSIZ) @@ -221,7 +224,7 @@ int ieee802154_add_iface(struct sk_buff *skb, struct genl_info *info) } dev = rdev_add_virtual_intf_deprecated(wpan_phy_to_rdev(phy), devname, - type); + name_assign_type, type); if (IS_ERR(dev)) { rc = PTR_ERR(dev); goto nla_put_failure; diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index a4daf91..f3c12f6 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -589,7 +589,7 @@ static int nl802154_new_interface(struct sk_buff *skb, struct genl_info *info) return rdev_add_virtual_intf(rdev, nla_data(info->attrs[NL802154_ATTR_IFNAME]), - type, extended_addr); + NET_NAME_USER, type, extended_addr); } static int nl802154_del_interface(struct sk_buff *skb, struct genl_info *info) diff --git a/net/ieee802154/rdev-ops.h b/net/ieee802154/rdev-ops.h index 624413e..7b5a9dd 100644 --- a/net/ieee802154/rdev-ops.h +++ b/net/ieee802154/rdev-ops.h @@ -8,10 +8,12 @@ static inline struct net_device * rdev_add_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, - const char *name, int type) + const char *name, + unsigned char name_assign_type, + int type) { return rdev->ops->add_virtual_intf_deprecated(&rdev->wpan_phy, name, - type); + name_assign_type, type); } static inline void @@ -23,13 +25,15 @@ rdev_del_virtual_intf_deprecated(struct cfg802154_registered_device *rdev, static inline int rdev_add_virtual_intf(struct cfg802154_registered_device *rdev, char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr) { int ret; trace_802154_rdev_add_virtual_intf(&rdev->wpan_phy, name, type, extended_addr); - ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, type, + ret = rdev->ops->add_virtual_intf(&rdev->wpan_phy, name, + name_assign_type, type, extended_addr); trace_802154_rdev_return_int(&rdev->wpan_phy, ret); return ret; diff --git a/net/mac802154/cfg.c b/net/mac802154/cfg.c index 5d9f68c..70be9c7 100644 --- a/net/mac802154/cfg.c +++ b/net/mac802154/cfg.c @@ -22,13 +22,14 @@ static struct net_device * ieee802154_add_iface_deprecated(struct wpan_phy *wpan_phy, - const char *name, int type) + const char *name, + unsigned char name_assign_type, int type) { struct ieee802154_local *local = wpan_phy_priv(wpan_phy); struct net_device *dev; rtnl_lock(); - dev = ieee802154_if_add(local, name, type, + dev = ieee802154_if_add(local, name, name_assign_type, type, cpu_to_le64(0x0000000000000000ULL)); rtnl_unlock(); @@ -45,12 +46,14 @@ static void ieee802154_del_iface_deprecated(struct wpan_phy *wpan_phy, static int ieee802154_add_iface(struct wpan_phy *phy, const char *name, + unsigned char name_assign_type, enum nl802154_iftype type, __le64 extended_addr) { struct ieee802154_local *local = wpan_phy_priv(phy); struct net_device *err; - err = ieee802154_if_add(local, name, type, extended_addr); + err = ieee802154_if_add(local, name, name_assign_type, type, + extended_addr); return PTR_ERR_OR_ZERO(err); } diff --git a/net/mac802154/ieee802154_i.h b/net/mac802154/ieee802154_i.h index bebd70f..127ba18 100644 --- a/net/mac802154/ieee802154_i.h +++ b/net/mac802154/ieee802154_i.h @@ -182,7 +182,8 @@ void ieee802154_iface_exit(void); void ieee802154_if_remove(struct ieee802154_sub_if_data *sdata); struct net_device * ieee802154_if_add(struct ieee802154_local *local, const char *name, - enum nl802154_iftype type, __le64 extended_addr); + unsigned char name_assign_type, enum nl802154_iftype type, + __le64 extended_addr); void ieee802154_remove_interfaces(struct ieee802154_local *local); #endif /* __IEEE802154_I_H */ diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c index 38b56f9..91b75ab 100644 --- a/net/mac802154/iface.c +++ b/net/mac802154/iface.c @@ -522,7 +522,8 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata, struct net_device * ieee802154_if_add(struct ieee802154_local *local, const char *name, - enum nl802154_iftype type, __le64 extended_addr) + unsigned char name_assign_type, enum nl802154_iftype type, + __le64 extended_addr) { struct net_device *ndev = NULL; struct ieee802154_sub_if_data *sdata = NULL; @@ -531,7 +532,7 @@ ieee802154_if_add(struct ieee802154_local *local, const char *name, ASSERT_RTNL(); ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size, name, - NET_NAME_UNKNOWN, ieee802154_if_setup); + name_assign_type, ieee802154_if_setup); if (!ndev) return ERR_PTR(-ENOMEM); diff --git a/net/mac802154/main.c b/net/mac802154/main.c index 8500378..68b9667 100644 --- a/net/mac802154/main.c +++ b/net/mac802154/main.c @@ -161,7 +161,8 @@ int ieee802154_register_hw(struct ieee802154_hw *hw) rtnl_lock(); - dev = ieee802154_if_add(local, "wpan%d", NL802154_IFTYPE_NODE, + dev = ieee802154_if_add(local, "wpan%d", NET_NAME_ENUM, + NL802154_IFTYPE_NODE, cpu_to_le64(0x0000000000000000ULL)); if (IS_ERR(dev)) { rtnl_unlock(); -- cgit v0.10.2 From 5e8e01e262be1eeaae598be44b8e43b29aab842a Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:58 +0200 Subject: at86rf230: remove tabs after define This patch cleanups the at86rf230 driver to use a space instead a tab after define. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 684488a..9a41deb 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -100,158 +100,158 @@ struct at86rf230_local { struct at86rf230_state_change tx; }; -#define RG_TRX_STATUS (0x01) -#define SR_TRX_STATUS 0x01, 0x1f, 0 -#define SR_RESERVED_01_3 0x01, 0x20, 5 -#define SR_CCA_STATUS 0x01, 0x40, 6 -#define SR_CCA_DONE 0x01, 0x80, 7 -#define RG_TRX_STATE (0x02) -#define SR_TRX_CMD 0x02, 0x1f, 0 -#define SR_TRAC_STATUS 0x02, 0xe0, 5 -#define RG_TRX_CTRL_0 (0x03) -#define SR_CLKM_CTRL 0x03, 0x07, 0 -#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 -#define SR_PAD_IO_CLKM 0x03, 0x30, 4 -#define SR_PAD_IO 0x03, 0xc0, 6 -#define RG_TRX_CTRL_1 (0x04) -#define SR_IRQ_POLARITY 0x04, 0x01, 0 -#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 -#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 -#define SR_RX_BL_CTRL 0x04, 0x10, 4 -#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 -#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 -#define SR_PA_EXT_EN 0x04, 0x80, 7 -#define RG_PHY_TX_PWR (0x05) -#define SR_TX_PWR 0x05, 0x0f, 0 -#define SR_PA_LT 0x05, 0x30, 4 -#define SR_PA_BUF_LT 0x05, 0xc0, 6 -#define RG_PHY_RSSI (0x06) -#define SR_RSSI 0x06, 0x1f, 0 -#define SR_RND_VALUE 0x06, 0x60, 5 -#define SR_RX_CRC_VALID 0x06, 0x80, 7 -#define RG_PHY_ED_LEVEL (0x07) -#define SR_ED_LEVEL 0x07, 0xff, 0 -#define RG_PHY_CC_CCA (0x08) -#define SR_CHANNEL 0x08, 0x1f, 0 -#define SR_CCA_MODE 0x08, 0x60, 5 -#define SR_CCA_REQUEST 0x08, 0x80, 7 -#define RG_CCA_THRES (0x09) -#define SR_CCA_ED_THRES 0x09, 0x0f, 0 -#define SR_RESERVED_09_1 0x09, 0xf0, 4 -#define RG_RX_CTRL (0x0a) -#define SR_PDT_THRES 0x0a, 0x0f, 0 -#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 -#define RG_SFD_VALUE (0x0b) -#define SR_SFD_VALUE 0x0b, 0xff, 0 -#define RG_TRX_CTRL_2 (0x0c) -#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 -#define SR_SUB_MODE 0x0c, 0x04, 2 -#define SR_BPSK_QPSK 0x0c, 0x08, 3 -#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 -#define SR_RESERVED_0c_5 0x0c, 0x60, 5 -#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 -#define RG_ANT_DIV (0x0d) -#define SR_ANT_CTRL 0x0d, 0x03, 0 -#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 -#define SR_ANT_DIV_EN 0x0d, 0x08, 3 -#define SR_RESERVED_0d_2 0x0d, 0x70, 4 -#define SR_ANT_SEL 0x0d, 0x80, 7 -#define RG_IRQ_MASK (0x0e) -#define SR_IRQ_MASK 0x0e, 0xff, 0 -#define RG_IRQ_STATUS (0x0f) -#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 -#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 -#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 -#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 -#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 -#define SR_IRQ_5_AMI 0x0f, 0x20, 5 -#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 -#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 -#define RG_VREG_CTRL (0x10) -#define SR_RESERVED_10_6 0x10, 0x03, 0 -#define SR_DVDD_OK 0x10, 0x04, 2 -#define SR_DVREG_EXT 0x10, 0x08, 3 -#define SR_RESERVED_10_3 0x10, 0x30, 4 -#define SR_AVDD_OK 0x10, 0x40, 6 -#define SR_AVREG_EXT 0x10, 0x80, 7 -#define RG_BATMON (0x11) -#define SR_BATMON_VTH 0x11, 0x0f, 0 -#define SR_BATMON_HR 0x11, 0x10, 4 -#define SR_BATMON_OK 0x11, 0x20, 5 -#define SR_RESERVED_11_1 0x11, 0xc0, 6 -#define RG_XOSC_CTRL (0x12) -#define SR_XTAL_TRIM 0x12, 0x0f, 0 -#define SR_XTAL_MODE 0x12, 0xf0, 4 -#define RG_RX_SYN (0x15) -#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 -#define SR_RESERVED_15_2 0x15, 0x70, 4 -#define SR_RX_PDT_DIS 0x15, 0x80, 7 -#define RG_XAH_CTRL_1 (0x17) -#define SR_RESERVED_17_8 0x17, 0x01, 0 -#define SR_AACK_PROM_MODE 0x17, 0x02, 1 -#define SR_AACK_ACK_TIME 0x17, 0x04, 2 -#define SR_RESERVED_17_5 0x17, 0x08, 3 -#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 -#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 -#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 -#define SR_RESERVED_17_1 0x17, 0x80, 7 -#define RG_FTN_CTRL (0x18) -#define SR_RESERVED_18_2 0x18, 0x7f, 0 -#define SR_FTN_START 0x18, 0x80, 7 -#define RG_PLL_CF (0x1a) -#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 -#define SR_PLL_CF_START 0x1a, 0x80, 7 -#define RG_PLL_DCU (0x1b) -#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 -#define SR_RESERVED_1b_2 0x1b, 0x40, 6 -#define SR_PLL_DCU_START 0x1b, 0x80, 7 -#define RG_PART_NUM (0x1c) -#define SR_PART_NUM 0x1c, 0xff, 0 -#define RG_VERSION_NUM (0x1d) -#define SR_VERSION_NUM 0x1d, 0xff, 0 -#define RG_MAN_ID_0 (0x1e) -#define SR_MAN_ID_0 0x1e, 0xff, 0 -#define RG_MAN_ID_1 (0x1f) -#define SR_MAN_ID_1 0x1f, 0xff, 0 -#define RG_SHORT_ADDR_0 (0x20) -#define SR_SHORT_ADDR_0 0x20, 0xff, 0 -#define RG_SHORT_ADDR_1 (0x21) -#define SR_SHORT_ADDR_1 0x21, 0xff, 0 -#define RG_PAN_ID_0 (0x22) -#define SR_PAN_ID_0 0x22, 0xff, 0 -#define RG_PAN_ID_1 (0x23) -#define SR_PAN_ID_1 0x23, 0xff, 0 -#define RG_IEEE_ADDR_0 (0x24) -#define SR_IEEE_ADDR_0 0x24, 0xff, 0 -#define RG_IEEE_ADDR_1 (0x25) -#define SR_IEEE_ADDR_1 0x25, 0xff, 0 -#define RG_IEEE_ADDR_2 (0x26) -#define SR_IEEE_ADDR_2 0x26, 0xff, 0 -#define RG_IEEE_ADDR_3 (0x27) -#define SR_IEEE_ADDR_3 0x27, 0xff, 0 -#define RG_IEEE_ADDR_4 (0x28) -#define SR_IEEE_ADDR_4 0x28, 0xff, 0 -#define RG_IEEE_ADDR_5 (0x29) -#define SR_IEEE_ADDR_5 0x29, 0xff, 0 -#define RG_IEEE_ADDR_6 (0x2a) -#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 -#define RG_IEEE_ADDR_7 (0x2b) -#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 -#define RG_XAH_CTRL_0 (0x2c) -#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 -#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 -#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 -#define RG_CSMA_SEED_0 (0x2d) -#define SR_CSMA_SEED_0 0x2d, 0xff, 0 -#define RG_CSMA_SEED_1 (0x2e) -#define SR_CSMA_SEED_1 0x2e, 0x07, 0 -#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 -#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 -#define SR_AACK_SET_PD 0x2e, 0x20, 5 -#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 -#define RG_CSMA_BE (0x2f) -#define SR_MIN_BE 0x2f, 0x0f, 0 -#define SR_MAX_BE 0x2f, 0xf0, 4 +#define RG_TRX_STATUS (0x01) +#define SR_TRX_STATUS 0x01, 0x1f, 0 +#define SR_RESERVED_01_3 0x01, 0x20, 5 +#define SR_CCA_STATUS 0x01, 0x40, 6 +#define SR_CCA_DONE 0x01, 0x80, 7 +#define RG_TRX_STATE (0x02) +#define SR_TRX_CMD 0x02, 0x1f, 0 +#define SR_TRAC_STATUS 0x02, 0xe0, 5 +#define RG_TRX_CTRL_0 (0x03) +#define SR_CLKM_CTRL 0x03, 0x07, 0 +#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 +#define SR_PAD_IO_CLKM 0x03, 0x30, 4 +#define SR_PAD_IO 0x03, 0xc0, 6 +#define RG_TRX_CTRL_1 (0x04) +#define SR_IRQ_POLARITY 0x04, 0x01, 0 +#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 +#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 +#define SR_RX_BL_CTRL 0x04, 0x10, 4 +#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 +#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 +#define SR_PA_EXT_EN 0x04, 0x80, 7 +#define RG_PHY_TX_PWR (0x05) +#define SR_TX_PWR 0x05, 0x0f, 0 +#define SR_PA_LT 0x05, 0x30, 4 +#define SR_PA_BUF_LT 0x05, 0xc0, 6 +#define RG_PHY_RSSI (0x06) +#define SR_RSSI 0x06, 0x1f, 0 +#define SR_RND_VALUE 0x06, 0x60, 5 +#define SR_RX_CRC_VALID 0x06, 0x80, 7 +#define RG_PHY_ED_LEVEL (0x07) +#define SR_ED_LEVEL 0x07, 0xff, 0 +#define RG_PHY_CC_CCA (0x08) +#define SR_CHANNEL 0x08, 0x1f, 0 +#define SR_CCA_MODE 0x08, 0x60, 5 +#define SR_CCA_REQUEST 0x08, 0x80, 7 +#define RG_CCA_THRES (0x09) +#define SR_CCA_ED_THRES 0x09, 0x0f, 0 +#define SR_RESERVED_09_1 0x09, 0xf0, 4 +#define RG_RX_CTRL (0x0a) +#define SR_PDT_THRES 0x0a, 0x0f, 0 +#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 +#define RG_SFD_VALUE (0x0b) +#define SR_SFD_VALUE 0x0b, 0xff, 0 +#define RG_TRX_CTRL_2 (0x0c) +#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 +#define SR_SUB_MODE 0x0c, 0x04, 2 +#define SR_BPSK_QPSK 0x0c, 0x08, 3 +#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 +#define SR_RESERVED_0c_5 0x0c, 0x60, 5 +#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 +#define RG_ANT_DIV (0x0d) +#define SR_ANT_CTRL 0x0d, 0x03, 0 +#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 +#define SR_ANT_DIV_EN 0x0d, 0x08, 3 +#define SR_RESERVED_0d_2 0x0d, 0x70, 4 +#define SR_ANT_SEL 0x0d, 0x80, 7 +#define RG_IRQ_MASK (0x0e) +#define SR_IRQ_MASK 0x0e, 0xff, 0 +#define RG_IRQ_STATUS (0x0f) +#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 +#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 +#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 +#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 +#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 +#define SR_IRQ_5_AMI 0x0f, 0x20, 5 +#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 +#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 +#define RG_VREG_CTRL (0x10) +#define SR_RESERVED_10_6 0x10, 0x03, 0 +#define SR_DVDD_OK 0x10, 0x04, 2 +#define SR_DVREG_EXT 0x10, 0x08, 3 +#define SR_RESERVED_10_3 0x10, 0x30, 4 +#define SR_AVDD_OK 0x10, 0x40, 6 +#define SR_AVREG_EXT 0x10, 0x80, 7 +#define RG_BATMON (0x11) +#define SR_BATMON_VTH 0x11, 0x0f, 0 +#define SR_BATMON_HR 0x11, 0x10, 4 +#define SR_BATMON_OK 0x11, 0x20, 5 +#define SR_RESERVED_11_1 0x11, 0xc0, 6 +#define RG_XOSC_CTRL (0x12) +#define SR_XTAL_TRIM 0x12, 0x0f, 0 +#define SR_XTAL_MODE 0x12, 0xf0, 4 +#define RG_RX_SYN (0x15) +#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 +#define SR_RESERVED_15_2 0x15, 0x70, 4 +#define SR_RX_PDT_DIS 0x15, 0x80, 7 +#define RG_XAH_CTRL_1 (0x17) +#define SR_RESERVED_17_8 0x17, 0x01, 0 +#define SR_AACK_PROM_MODE 0x17, 0x02, 1 +#define SR_AACK_ACK_TIME 0x17, 0x04, 2 +#define SR_RESERVED_17_5 0x17, 0x08, 3 +#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 +#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 +#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 +#define SR_RESERVED_17_1 0x17, 0x80, 7 +#define RG_FTN_CTRL (0x18) +#define SR_RESERVED_18_2 0x18, 0x7f, 0 +#define SR_FTN_START 0x18, 0x80, 7 +#define RG_PLL_CF (0x1a) +#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 +#define SR_PLL_CF_START 0x1a, 0x80, 7 +#define RG_PLL_DCU (0x1b) +#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 +#define SR_RESERVED_1b_2 0x1b, 0x40, 6 +#define SR_PLL_DCU_START 0x1b, 0x80, 7 +#define RG_PART_NUM (0x1c) +#define SR_PART_NUM 0x1c, 0xff, 0 +#define RG_VERSION_NUM (0x1d) +#define SR_VERSION_NUM 0x1d, 0xff, 0 +#define RG_MAN_ID_0 (0x1e) +#define SR_MAN_ID_0 0x1e, 0xff, 0 +#define RG_MAN_ID_1 (0x1f) +#define SR_MAN_ID_1 0x1f, 0xff, 0 +#define RG_SHORT_ADDR_0 (0x20) +#define SR_SHORT_ADDR_0 0x20, 0xff, 0 +#define RG_SHORT_ADDR_1 (0x21) +#define SR_SHORT_ADDR_1 0x21, 0xff, 0 +#define RG_PAN_ID_0 (0x22) +#define SR_PAN_ID_0 0x22, 0xff, 0 +#define RG_PAN_ID_1 (0x23) +#define SR_PAN_ID_1 0x23, 0xff, 0 +#define RG_IEEE_ADDR_0 (0x24) +#define SR_IEEE_ADDR_0 0x24, 0xff, 0 +#define RG_IEEE_ADDR_1 (0x25) +#define SR_IEEE_ADDR_1 0x25, 0xff, 0 +#define RG_IEEE_ADDR_2 (0x26) +#define SR_IEEE_ADDR_2 0x26, 0xff, 0 +#define RG_IEEE_ADDR_3 (0x27) +#define SR_IEEE_ADDR_3 0x27, 0xff, 0 +#define RG_IEEE_ADDR_4 (0x28) +#define SR_IEEE_ADDR_4 0x28, 0xff, 0 +#define RG_IEEE_ADDR_5 (0x29) +#define SR_IEEE_ADDR_5 0x29, 0xff, 0 +#define RG_IEEE_ADDR_6 (0x2a) +#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 +#define RG_IEEE_ADDR_7 (0x2b) +#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 +#define RG_XAH_CTRL_0 (0x2c) +#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 +#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 +#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 +#define RG_CSMA_SEED_0 (0x2d) +#define SR_CSMA_SEED_0 0x2d, 0xff, 0 +#define RG_CSMA_SEED_1 (0x2e) +#define SR_CSMA_SEED_1 0x2e, 0x07, 0 +#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 +#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 +#define SR_AACK_SET_PD 0x2e, 0x20, 5 +#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 +#define RG_CSMA_BE (0x2f) +#define SR_MIN_BE 0x2f, 0x0f, 0 +#define SR_MAX_BE 0x2f, 0xf0, 4 #define CMD_REG 0x80 #define CMD_REG_MASK 0x3f -- cgit v0.10.2 From 2ad33244db816755a27dcdd312a70d966c85f0ee Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:59 +0200 Subject: at86rf230: move cal_timeout to state change This patch moves the calculation timeout of TRX_OFF to RX_AACK_ON handling to the async state change functionality. With this patch we can do a reset of calculation timeout when others TRX_OFF to RX_AACK_ON happens instead of doing this on interface up only. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 9a41deb..6358788 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -611,6 +611,11 @@ at86rf230_async_state_delay(void *context) switch (ctx->to_state) { case STATE_RX_AACK_ON: tim = ktime_set(0, c->t_off_to_aack * NSEC_PER_USEC); + /* state change from TRX_OFF to RX_AACK_ON to do a + * calibration, we need to reset the timeout for the + * next one. + */ + lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); @@ -1039,9 +1044,6 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level) static int at86rf230_start(struct ieee802154_hw *hw) { - struct at86rf230_local *lp = hw->priv; - - lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON); } -- cgit v0.10.2 From 3b951ca7d2772834c7ca828f0fe5745480426982 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:00 +0200 Subject: at86rf230: add TX_ARET_ON for calibration timeout This patch adds a calibration timeout reset when change from TRX_OFF to TX_ARET_ON which also occurs a calibration. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 6358788..f99dce5 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -617,10 +617,11 @@ at86rf230_async_state_delay(void *context) */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; + case STATE_TX_ARET_ON: case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); - /* state change from TRX_OFF to TX_ON to do a - * calibration, we need to reset the timeout for the + /* state change from TRX_OFF to TX_ON or ARET_ON to do + * a calibration, we need to reset the timeout for the * next one. */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; -- cgit v0.10.2 From 2f8cdd95097bdcd8d1e2b02edb0a9deb1e034a7e Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:01 +0200 Subject: at86rf230: remove unnecessary tx state change All supported transceivers can do a valid state change from TRX_OFF to AACK_ON. This patch removes the state change chain from TRX_OFF -> TX_ON -> AACK_ON instead we doing a directly state change from TRX_OFF to AACK_ON. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index f99dce5..6285145 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -781,16 +781,6 @@ at86rf230_tx_on(void *context) } static void -at86rf230_tx_trac_error(void *context) -{ - struct at86rf230_state_change *ctx = context; - struct at86rf230_local *lp = ctx->lp; - - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_tx_on, true); -} - -static void at86rf230_tx_trac_check(void *context) { struct at86rf230_state_change *ctx = context; @@ -799,12 +789,12 @@ at86rf230_tx_trac_check(void *context) const u8 trac = (buf[1] & 0xe0) >> 5; /* If trac status is different than zero we need to do a state change - * to STATE_FORCE_TRX_OFF then STATE_TX_ON to recover the transceiver - * state to TX_ON. + * to STATE_FORCE_TRX_OFF then STATE_RX_AACK_ON to recover the + * transceiver. */ if (trac) at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, - at86rf230_tx_trac_error, true); + at86rf230_tx_on, true); else at86rf230_tx_on(context); } -- cgit v0.10.2 From 8500920317813ed420311d9cf16c345fc216fb86 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:02 +0200 Subject: at86rf230: change state change if from trx_off If a transmit ends in a calibration which means the transceiver do a TRX_OFF state change, we can directly change into TX_ARET state instead doing a TX_ON to TX_ARET statechange. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 6285145..05ef56d 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -95,6 +95,7 @@ struct at86rf230_local { unsigned long cal_timeout; s8 max_frame_retries; bool is_tx; + bool is_tx_from_off; u8 tx_retry; struct sk_buff *tx_skb; struct at86rf230_state_change tx; @@ -991,12 +992,21 @@ at86rf230_xmit_start(void *context) * are in STATE_TX_ON. The pfad differs here, so we change * the complete handler. */ - if (lp->tx_aret) - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_xmit_tx_on, false); - else + if (lp->tx_aret) { + if (lp->is_tx_from_off) { + lp->is_tx_from_off = false; + at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, + at86rf230_xmit_tx_on, + false); + } else { + at86rf230_async_state_change(lp, ctx, STATE_TX_ON, + at86rf230_xmit_tx_on, + false); + } + } else { at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_write_frame, false); + } } static int @@ -1015,11 +1025,13 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) * to TX_ON, the lp->cal_timeout should be reinit by state_delay * function then to start in the next 5 minutes. */ - if (time_is_before_jiffies(lp->cal_timeout)) + if (time_is_before_jiffies(lp->cal_timeout)) { + lp->is_tx_from_off = true; at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF, at86rf230_xmit_start, false); - else + } else { at86rf230_xmit_start(ctx); + } return 0; } -- cgit v0.10.2 From d2c8bf51d07729ae6887fa84947b1f825b3729e1 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:03 +0200 Subject: at86rf230: add slp_tr support to start tx This patch adds support for one of the slp_tr gpio use cases which indicates the TX_START command without doing some spi bus traffic. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 05ef56d..67d00fb 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -85,6 +85,7 @@ struct at86rf230_local { struct ieee802154_hw *hw; struct at86rf2xx_chip_data *data; struct regmap *regmap; + int slp_tr; struct completion state_complete; struct at86rf230_state_change state; @@ -339,6 +340,14 @@ at86rf230_write_subreg(struct at86rf230_local *lp, return regmap_update_bits(lp->regmap, addr, mask, data << shift); } +static inline void +at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp) +{ + gpio_set_value(lp->slp_tr, 1); + udelay(1); + gpio_set_value(lp->slp_tr, 0); +} + static bool at86rf230_reg_writeable(struct device *dev, unsigned int reg) { @@ -940,13 +949,18 @@ at86rf230_write_frame_complete(void *context) u8 *buf = ctx->buf; int rc; - buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; - buf[1] = STATE_BUSY_TX; ctx->trx.len = 2; - ctx->msg.complete = NULL; - rc = spi_async(lp->spi, &ctx->msg); - if (rc) - at86rf230_async_error(lp, ctx, rc); + + if (gpio_is_valid(lp->slp_tr)) { + at86rf230_slp_tr_rising_edge(lp); + } else { + buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; + buf[1] = STATE_BUSY_TX; + ctx->msg.complete = NULL; + rc = spi_async(lp->spi, &ctx->msg); + if (rc) + at86rf230_async_error(lp, ctx, rc); + } } static void @@ -1680,6 +1694,7 @@ static int at86rf230_probe(struct spi_device *spi) lp = hw->priv; lp->hw = hw; lp->spi = spi; + lp->slp_tr = slp_tr; hw->parent = &spi->dev; hw->vif_data_size = sizeof(*lp); ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); -- cgit v0.10.2 From 1add15646672ff4e7fe59bec2afcb5a0c80c5e49 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:04 +0200 Subject: ieee802154: trace: fix endian convertion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fix endian convertions for extended address and short address handling when TP_printk is called. Signed-off-by: Alexander Aring Cc: Guido Günther Signed-off-by: Marcel Holtmann diff --git a/net/ieee802154/trace.h b/net/ieee802154/trace.h index 8ed9f97..5ac25eb 100644 --- a/net/ieee802154/trace.h +++ b/net/ieee802154/trace.h @@ -58,7 +58,7 @@ TRACE_EVENT(802154_rdev_add_virtual_intf, ), TP_printk(WPAN_PHY_PR_FMT ", virtual intf name: %s, type: %d, ea %llx", WPAN_PHY_PR_ARG, __get_str(vir_intf_name), __entry->type, - __entry->extended_addr) + __le64_to_cpu(__entry->extended_addr)) ); TRACE_EVENT(802154_rdev_del_virtual_intf, @@ -138,7 +138,8 @@ DEFINE_EVENT_PRINT(802154_le16_template, 802154_rdev_set_short_addr, __le16 le16arg), TP_ARGS(wpan_phy, wpan_dev, le16arg), TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT ", sa: 0x%04x", - WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, __entry->le16arg) + WPAN_PHY_PR_ARG, WPAN_DEV_PR_ARG, + __le16_to_cpu(__entry->le16arg)) ); TRACE_EVENT(802154_rdev_set_backoff_exponent, -- cgit v0.10.2 From 2c62e8492ed7358bbe7da51666c7e0f6da9474ee Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Thu, 30 Apr 2015 12:41:28 +0800 Subject: x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus An IO port or MMIO resource assigned to a PCI host bridge may be consumed by the host bridge itself or available to its child bus/devices. The ACPI specification defines a bit (Producer/Consumer) to tell whether the resource is consumed by the host bridge itself, but firmware hasn't used that bit consistently, so we can't rely on it. Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored all IO port resources defined by acpi_resource_io and acpi_resource_fixed_io to filter out IO ports consumed by the host bridge itself. Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation") started accepting all IO port and MMIO resources, which caused a regression that IO port resources consumed by the host bridge itself became available to its child devices. Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by host bridge itself") ignored resources consumed by the host bridge itself by checking the IORESOURCE_WINDOW flag, which accidently removed MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32 and acpi_resource_fixed_memory32. On x86 and IA64 platforms, all IO port and MMIO resources are assumed to be available to child bus/devices except one special case: IO port [0xCF8-0xCFF] is consumed by the host bridge itself to access PCI configuration space. So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution will also ease the way to consolidate ACPI PCI host bridge common code from x86, ia64 and ARM64. Related ACPI table are archived at: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Related discussions at: http://patchwork.ozlabs.org/patch/461633/ https://lkml.org/lkml/2015/3/29/304 Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself) Reported-by: Bernhard Thaler Signed-off-by: Jiang Liu Cc: 4.0+ # 4.0+ Reviewed-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index e469598..d939633 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge) kfree(info); } +/* + * An IO port or MMIO resource assigned to a PCI host bridge may be + * consumed by the host bridge itself or available to its child + * bus/devices. The ACPI specification defines a bit (Producer/Consumer) + * to tell whether the resource is consumed by the host bridge itself, + * but firmware hasn't used that bit consistently, so we can't rely on it. + * + * On x86 and IA64 platforms, all IO port and MMIO resources are assumed + * to be available to child bus/devices except one special case: + * IO port [0xCF8-0xCFF] is consumed by the host bridge itself + * to access PCI configuration space. + * + * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. + */ +static bool resource_is_pcicfg_ioport(struct resource *res) +{ + return (res->flags & IORESOURCE_IO) && + res->start == 0xCF8 && res->end == 0xCFF; +} + static void probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device, int busnum, int domain, @@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info, "no IO and memory resources present in _CRS\n"); else resource_list_for_each_entry_safe(entry, tmp, list) { - if ((entry->res->flags & IORESOURCE_WINDOW) == 0 || - (entry->res->flags & IORESOURCE_DISABLED)) + if ((entry->res->flags & IORESOURCE_DISABLED) || + resource_is_pcicfg_ioport(entry->res)) resource_list_destroy_entry(entry); else entry->res->name = info->name; diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 5589a6e..8244f01 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(acpi_dev_get_resources); * @ares: Input ACPI resource object. * @types: Valid resource types of IORESOURCE_XXX * - * This is a hepler function to support acpi_dev_get_resources(), which filters + * This is a helper function to support acpi_dev_get_resources(), which filters * ACPI resource objects according to resource types. */ int acpi_dev_filter_resource_type(struct acpi_resource *ares, -- cgit v0.10.2 From aa8d6b73ea33c2167c543663ab66039ec94d58f1 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 24 Apr 2015 22:22:19 +0200 Subject: ARM: pxa: pxa_cplds: add lubbock and mainstone IO Historically, this support was in arch/arm/mach-pxa/lubbock.c and arch/arm/mach-pxa/mainstone.c. When gpio-pxa was moved to drivers/pxa, it became a driver, and its initialization and probing happened at postcore initcall. The lubbock code used to install the chained lubbock interrupt handler at init_irq() time. The consequence of the gpio-pxa change is that the installed chained irq handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(), removing : - the handler - the falling edge detection setting of GPIO0, which revealed the interrupt request from the lubbock IO board. As a fix, move the gpio0 chained handler setup to a place where we have the guarantee that pxa_gpio_probe() was called before, so that lubbock handler becomes the true IRQ chained handler of GPIO0, demuxing the lubbock IO board interrupts. This patch moves all that handling to a mfd driver. It's only purpose for the time being is the interrupt handling, but in the future it should encompass all the motherboard CPLDs handling : - leds - switches - hexleds The same logic applies to mainstone board. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8896e71..f096836 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111 config PXA310_ULPI bool +config PXA_SYSTEMS_CPLDS + tristate "Motherboard cplds" + default ARCH_LUBBOCK || MACH_MAINSTONE + help + This driver supports the Lubbock and Mainstone multifunction chip + found on the pxa25x development platform system (Lubbock) and pxa27x + development platform system (Mainstone). This IO board supports the + interrupts handling, ethernet controller, flash chips, etc ... + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index eb0bf76..4087d33 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o +obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c new file mode 100644 index 0000000..f1aeb54 --- /dev/null +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -0,0 +1,200 @@ +/* + * Intel Reference Systems cplds + * + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Cplds motherboard driver, supporting lubbock and mainstone SoC board. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FPGA_IRQ_MASK_EN 0x0 +#define FPGA_IRQ_SET_CLR 0x10 + +#define CPLDS_NB_IRQ 32 + +struct cplds { + void __iomem *base; + int irq; + unsigned int irq_mask; + struct gpio_desc *gpio0; + struct irq_domain *irqdomain; +}; + +static irqreturn_t cplds_irq_handler(int in_irq, void *d) +{ + struct cplds *fpga = d; + unsigned long pending; + unsigned int bit; + + pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask; + for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) + generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit)); + + return IRQ_HANDLED; +} + +static void cplds_irq_mask_ack(struct irq_data *d) +{ + struct cplds *fpga = irq_data_get_irq_chip_data(d); + unsigned int cplds_irq = irqd_to_hwirq(d); + unsigned int set, bit = BIT(cplds_irq); + + fpga->irq_mask &= ~bit; + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + set = readl(fpga->base + FPGA_IRQ_SET_CLR); + writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR); +} + +static void cplds_irq_unmask(struct irq_data *d) +{ + struct cplds *fpga = irq_data_get_irq_chip_data(d); + unsigned int cplds_irq = irqd_to_hwirq(d); + unsigned int bit = BIT(cplds_irq); + + fpga->irq_mask |= bit; + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); +} + +static struct irq_chip cplds_irq_chip = { + .name = "pxa_cplds", + .irq_mask_ack = cplds_irq_mask_ack, + .irq_unmask = cplds_irq_unmask, + .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, +}; + +static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct cplds *fpga = d->host_data; + + irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq); + irq_set_chip_data(irq, fpga); + + return 0; +} + +static const struct irq_domain_ops cplds_irq_domain_ops = { + .xlate = irq_domain_xlate_twocell, + .map = cplds_irq_domain_map, +}; + +static int cplds_resume(struct platform_device *pdev) +{ + struct cplds *fpga = platform_get_drvdata(pdev); + + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + + return 0; +} + +static int cplds_probe(struct platform_device *pdev) +{ + struct resource *res; + struct cplds *fpga; + int ret; + unsigned int base_irq = 0; + unsigned long irqflags = 0; + + fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL); + if (!fpga) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) { + fpga->irq = (unsigned int)res->start; + irqflags = res->flags; + } + if (!fpga->irq) + return -ENODEV; + + base_irq = platform_get_irq(pdev, 1); + if (base_irq < 0) + base_irq = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + fpga->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(fpga->base)) + return PTR_ERR(fpga->base); + + platform_set_drvdata(pdev, fpga); + + writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); + writel(0, fpga->base + FPGA_IRQ_SET_CLR); + + ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler, + irqflags, dev_name(&pdev->dev), fpga); + if (ret == -ENOSYS) + return -EPROBE_DEFER; + + if (ret) { + dev_err(&pdev->dev, "couldn't request main irq%d: %d\n", + fpga->irq, ret); + return ret; + } + + irq_set_irq_wake(fpga->irq, 1); + fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, + CPLDS_NB_IRQ, + &cplds_irq_domain_ops, fpga); + if (!fpga->irqdomain) + return -ENODEV; + + if (base_irq) { + ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0, + CPLDS_NB_IRQ); + if (ret) { + dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n", + base_irq, base_irq + CPLDS_NB_IRQ); + return ret; + } + } + + return 0; +} + +static int cplds_remove(struct platform_device *pdev) +{ + struct cplds *fpga = platform_get_drvdata(pdev); + + irq_set_chip_and_handler(fpga->irq, NULL, NULL); + + return 0; +} + +static const struct of_device_id cplds_id_table[] = { + { .compatible = "intel,lubbock-cplds-irqs", }, + { .compatible = "intel,mainstone-cplds-irqs", }, + { } +}; +MODULE_DEVICE_TABLE(of, cplds_id_table); + +static struct platform_driver cplds_driver = { + .driver = { + .name = "pxa_cplds_irqs", + .of_match_table = of_match_ptr(cplds_id_table), + }, + .probe = cplds_probe, + .remove = cplds_remove, + .resume = cplds_resume, +}; + +module_platform_driver(cplds_driver); + +MODULE_DESCRIPTION("PXA Cplds interrupts driver"); +MODULE_AUTHOR("Robert Jarzmik "); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 277688639f98a9e34a6f109f9cd6129f92e718c1 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 24 Apr 2015 23:22:35 +0200 Subject: ARM: pxa: mainstone: use new pxa_cplds driver As the interrupt handling was transferred to the pxa_cplds driver, make the switch in mainstone platform code. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 1bfc4e8..e82a7d3 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -120,7 +120,9 @@ #define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ /* board specific IRQs */ -#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) +#define MAINSTONE_NR_IRQS IRQ_BOARD_START + +#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x)) #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) #define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) @@ -136,6 +138,4 @@ #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) -#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16) - #endif diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 78b84c0..2c0658c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = { GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, }; -static unsigned long mainstone_irq_enabled; - -static void mainstone_mask_irq(struct irq_data *d) -{ - int mainstone_irq = (d->irq - MAINSTONE_IRQ(0)); - MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq)); -} - -static void mainstone_unmask_irq(struct irq_data *d) -{ - int mainstone_irq = (d->irq - MAINSTONE_IRQ(0)); - /* the irq can be acknowledged only if deasserted, so it's done here */ - MST_INTSETCLR &= ~(1 << mainstone_irq); - MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq)); -} - -static struct irq_chip mainstone_irq_chip = { - .name = "FPGA", - .irq_ack = mainstone_mask_irq, - .irq_mask = mainstone_mask_irq, - .irq_unmask = mainstone_unmask_irq, -}; - -static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled; - do { - /* clear useless edge notification */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - if (likely(pending)) { - irq = MAINSTONE_IRQ(0) + __ffs(pending); - generic_handle_irq(irq); - } - pending = MST_INTSETCLR & mainstone_irq_enabled; - } while (pending); -} - -static void __init mainstone_init_irq(void) -{ - int irq; - - pxa27x_init_irq(); - - /* setup extra Mainstone irqs */ - for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { - irq_set_chip_and_handler(irq, &mainstone_irq_chip, - handle_level_irq); - if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); - else - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - set_irq_flags(MAINSTONE_IRQ(8), 0); - set_irq_flags(MAINSTONE_IRQ(12), 0); - - MST_INTMSKENA = 0; - MST_INTSETCLR = 0; - - irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler); - irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); -} - -#ifdef CONFIG_PM - -static void mainstone_irq_resume(void) -{ - MST_INTMSKENA = mainstone_irq_enabled; -} - -static struct syscore_ops mainstone_irq_syscore_ops = { - .resume = mainstone_irq_resume, -}; - -static int __init mainstone_irq_device_init(void) -{ - if (machine_is_mainstone()) - register_syscore_ops(&mainstone_irq_syscore_ops); - - return 0; -} - -device_initcall(mainstone_irq_device_init); - -#endif - - static struct resource smc91x_resources[] = { [0] = { .start = (MST_ETH_PHYS + 0x300), @@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = { }, }; +static struct resource mst_cplds_resources[] = { + [0] = { + .start = MST_FPGA_PHYS + 0xc0, + .end = MST_FPGA_PHYS + 0xe0 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_GPIO_TO_IRQ(0), + .end = PXA_GPIO_TO_IRQ(0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, + [2] = { + .start = MAINSTONE_IRQ(0), + .end = MAINSTONE_IRQ(15), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mst_cplds_device = { + .name = "pxa_cplds_irqs", + .id = -1, + .resource = &mst_cplds_resources[0], + .num_resources = 3, +}; + static struct platform_device *platform_devices[] __initdata = { &smc91x_device, &mst_flash_device[0], &mst_flash_device[1], &mst_gpio_keys_device, + &mst_cplds_device, }; static struct pxaohci_platform_data mainstone_ohci_platform_data = { @@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .atag_offset = 0x100, /* BLOB boot parameter setting */ .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, - .init_irq = mainstone_init_irq, + .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_time = pxa_timer_init, .init_machine = mainstone_init, -- cgit v0.10.2 From fc9e38c0f4d38bfc68b405cf48365d65f7b6319e Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 14 Dec 2014 23:04:14 +0100 Subject: ARM: pxa: lubbock: use new pxa_cplds driver As the interrupt handling was transferred to the pxa_cplds driver, make the switch in lubbock platform code. Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device") Signed-off-by: Robert Jarzmik Acked-by: Arnd Bergmann diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 958cd6af..1eecf79 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -37,7 +37,9 @@ #define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) /* Board specific IRQs */ -#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) +#define LUBBOCK_NR_IRQS IRQ_BOARD_START + +#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x)) #define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) #define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) #define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ @@ -47,8 +49,7 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) -#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16) -#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55) +#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32) #ifndef __ASSEMBLY__ extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index d8a1be6..4ac9ab8 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set) } EXPORT_SYMBOL(lubbock_set_misc_wr); -static unsigned long lubbock_irq_enabled; - -static void lubbock_mask_irq(struct irq_data *d) -{ - int lubbock_irq = (d->irq - LUBBOCK_IRQ(0)); - LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq)); -} - -static void lubbock_unmask_irq(struct irq_data *d) -{ - int lubbock_irq = (d->irq - LUBBOCK_IRQ(0)); - /* the irq can be acknowledged only if deasserted, so it's done here */ - LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq); - LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq)); -} - -static struct irq_chip lubbock_irq_chip = { - .name = "FPGA", - .irq_ack = lubbock_mask_irq, - .irq_mask = lubbock_mask_irq, - .irq_unmask = lubbock_unmask_irq, -}; - -static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; - do { - /* clear our parent irq */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - if (likely(pending)) { - irq = LUBBOCK_IRQ(0) + __ffs(pending); - generic_handle_irq(irq); - } - pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; - } while (pending); -} - -static void __init lubbock_init_irq(void) -{ - int irq; - - pxa25x_init_irq(); - - /* setup extra lubbock irqs */ - for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { - irq_set_chip_and_handler(irq, &lubbock_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler); - irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); -} - -#ifdef CONFIG_PM - -static void lubbock_irq_resume(void) -{ - LUB_IRQ_MASK_EN = lubbock_irq_enabled; -} - -static struct syscore_ops lubbock_irq_syscore_ops = { - .resume = lubbock_irq_resume, -}; - -static int __init lubbock_irq_device_init(void) -{ - if (machine_is_lubbock()) { - register_syscore_ops(&lubbock_irq_syscore_ops); - return 0; - } - return -ENODEV; -} - -device_initcall(lubbock_irq_device_init); - -#endif - static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; @@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = { }, }; +static struct resource lubbock_cplds_resources[] = { + [0] = { + .start = LUBBOCK_FPGA_PHYS + 0xc0, + .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_GPIO_TO_IRQ(0), + .end = PXA_GPIO_TO_IRQ(0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, + [2] = { + .start = LUBBOCK_IRQ(0), + .end = LUBBOCK_IRQ(6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lubbock_cplds_device = { + .name = "pxa_cplds_irqs", + .id = -1, + .resource = &lubbock_cplds_resources[0], + .num_resources = 3, +}; + + static struct platform_device *devices[] __initdata = { &sa1111_device, &smc91x_device, &lubbock_flash_device[0], &lubbock_flash_device[1], + &lubbock_cplds_device, }; static struct pxafb_mode_info sharp_lm8v31_mode = { @@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") /* Maintainer: MontaVista Software Inc. */ .map_io = lubbock_map_io, .nr_irqs = LUBBOCK_NR_IRQS, - .init_irq = lubbock_init_irq, + .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_time = pxa_timer_init, .init_machine = lubbock_init, -- cgit v0.10.2 From 3349fb64b2927407017d970dd5c4daf3c5ad69f8 Mon Sep 17 00:00:00 2001 From: Chris Bainbridge Date: Wed, 29 Apr 2015 21:21:40 +0100 Subject: ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook Commit 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' caused the MacBook firmware to expose the SBS, resulting in intermittent hangs of several minutes on boot, and failure to detect or report the battery. Fix this by adding a 5 us delay to the start of each SMBUS transaction. This timing is the result of experimentation - hangs were observed with 3 us but never with 5 us. Fixes: 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651 Signed-off-by: Chris Bainbridge Cc: 3.18+ # 3.18+ [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 26e5b50..bf034f8 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "sbshc.h" #define PREFIX "ACPI: " @@ -87,6 +88,8 @@ enum acpi_smb_offset { ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */ }; +static bool macbook; + static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data) { return ec_read(hc->offset + address, data); @@ -132,6 +135,8 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol, } mutex_lock(&hc->lock); + if (macbook) + udelay(5); if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp)) goto end; if (temp) { @@ -257,12 +262,29 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit, acpi_handle handle, acpi_ec_query_func func, void *data); +static int macbook_dmi_match(const struct dmi_system_id *d) +{ + pr_debug("Detected MacBook, enabling workaround\n"); + macbook = true; + return 0; +} + +static struct dmi_system_id acpi_smbus_dmi_table[] = { + { macbook_dmi_match, "Apple MacBook", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") }, + }, + { }, +}; + static int acpi_smbus_hc_add(struct acpi_device *device) { int status; unsigned long long val; struct acpi_smb_hc *hc; + dmi_check_system(acpi_smbus_dmi_table); + if (!device) return -EINVAL; -- cgit v0.10.2 From 2375a212ca06d35f90841bc511b3e9ae8a95a82e Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Wed, 29 Apr 2015 10:37:24 +0200 Subject: ACPI / documentation: fix a sentence about GPIO resources The sentence "These resources are used be used to pass ..." contains a suspicious repetition, likely the author meant "These resources can be used to pass ...". Simplify the wording. Signed-off-by: Antonio Ospite Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 750401f..15dfce7 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -253,7 +253,7 @@ input driver: GPIO support ~~~~~~~~~~~~ ACPI 5 introduced two new resources to describe GPIO connections: GpioIo -and GpioInt. These resources are used be used to pass GPIO numbers used by +and GpioInt. These resources can be used to pass GPIO numbers used by the device to the driver. ACPI 5.1 extended this with _DSD (Device Specific Data) which made it possible to name the GPIOs among other things. -- cgit v0.10.2 From 12392f5896c9affc03c1ddd95a83c32238862a58 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 29 Apr 2015 16:55:43 +0300 Subject: ARM: shmobile: koelsch: Fix adv7511 IRQ sensing The adv7511 IRQ is low level triggered, not falling edge triggered. The wrong sense configuration results in no interrupt being triggered at all, breaking hotplug detection. Fix it. Signed-off-by: Laurent Pinchart Fixes: 83a0731b39f3 ("ARM: shmobile: koelsch: Add DU HDMI output support") Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 74c3212..824ddab 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -545,7 +545,7 @@ compatible = "adi,adv7511w"; reg = <0x39>; interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; -- cgit v0.10.2 From 2fa30fe957f3b3599a2f75688405495771877c14 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 1 May 2015 11:10:09 +1000 Subject: selftests/powerpc: Fix the pmu install rule My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea44b84 ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index 5a16117..a9099d9 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -26,7 +26,7 @@ override define EMIT_TESTS $(MAKE) -s -C ebb emit_tests endef -DEFAULT_INSTALL := $(INSTALL_RULE) +DEFAULT_INSTALL_RULE := $(INSTALL_RULE) override define INSTALL_RULE $(DEFAULT_INSTALL_RULE) $(MAKE) -C ebb install -- cgit v0.10.2 From f32393c943e297b8ae180c8f83d81a156c7d0412 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Wed, 29 Apr 2015 20:42:06 -0500 Subject: powerpc/pseries: Correct cpu affinity for dlpar added cpus The incorrect ordering of operations during cpu dlpar add results in invalid affinity for the cpu being added. The ibm,associativity property in the device tree is populated with all zeroes for the added cpu which results in invalid affinity mappings and all cpus appear to belong to node 0. This occurs because rtas configure-connector is called prior to making the rtas set-indicator calls. Phyp does not assign affinity information for a cpu until the rtas set-indicator calls are made to set the isolation and allocation state. Correct the order of operations to make the rtas set-indicator calls (done in dlpar_acquire_drc) before calling rtas configure-connector. Fixes: 1a8061c46c46 ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by: Nathan Fontenot Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index b4b1109..019d34a 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -412,6 +412,10 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count) if (rc) return -EINVAL; + rc = dlpar_acquire_drc(drc_index); + if (rc) + return -EINVAL; + parent = of_find_node_by_path("/cpus"); if (!parent) return -ENODEV; @@ -422,12 +426,6 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count) of_node_put(parent); - rc = dlpar_acquire_drc(drc_index); - if (rc) { - dlpar_free_cc_nodes(dn); - return -EINVAL; - } - rc = dlpar_attach_node(dn); if (rc) { dlpar_release_drc(drc_index); -- cgit v0.10.2 From 1ae79b78bc52b910a224f3795122538516e07b5f Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Fri, 1 May 2015 09:14:11 +1000 Subject: powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() When asserting reset in pcibios_set_pcie_reset_state(), the PE is enforced to (hardware) frozen state in order to drop unexpected PCI transactions (except PCI config read/write) automatically by hardware during reset, which would cause recursive EEH error. However, the (software) frozen state EEH_PE_ISOLATED is missed. When users get 0xFF from PCI config or MMIO read, EEH_PE_ISOLATED is set in PE state retrival backend. Unfortunately, nobody (the reset handler or the EEH recovery functinality in host) will clear EEH_PE_ISOLATED when the PE has been passed through to guest. The patch sets and clears EEH_PE_ISOLATED properly during reset in function pcibios_set_pcie_reset_state() to fix the issue. Fixes: 28158cd ("Enhance pcibios_set_pcie_reset_state()") Reported-by: Carol L. Soto Signed-off-by: Gavin Shan Tested-by: Carol L. Soto Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 44b480e..fa046ca 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -749,21 +749,24 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat eeh_unfreeze_pe(pe, false); eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev); + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); break; case pcie_hot_reset: + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_HOT); break; case pcie_warm_reset: + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL); break; default: - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); + eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED); return -EINVAL; }; -- cgit v0.10.2 From d91dafc02f42e23c1a906202ebde5d7c49ef058d Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Fri, 1 May 2015 09:22:15 +1000 Subject: powerpc/eeh: Delay probing EEH device during hotplug Commit 1c509148b ("powerpc/eeh: Do probe on pci_dn") probes EEH devices in early stage, which is reasonable to pSeries platform. However, it's wrong for PowerNV platform because the PE# isn't determined until the resources (IO and MMIO) are assigned to PE in hotplug case. So we have to delay probing EEH devices for PowerNV platform until the PE# is assigned. Fixes: ff57b454ddb9 ("powerpc/eeh: Do probe on pci_dn") Signed-off-by: Gavin Shan Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index fa046ca..9ee61d1 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -1061,6 +1061,9 @@ void eeh_add_device_early(struct pci_dn *pdn) if (!edev || !eeh_enabled()) return; + if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) + return; + /* USB Bus children of PCI devices will not have BUID's */ phb = edev->phb; if (NULL == phb || @@ -1115,6 +1118,9 @@ void eeh_add_device_late(struct pci_dev *dev) return; } + if (eeh_has_flag(EEH_PROBE_MODE_DEV)) + eeh_ops->probe(pdn, NULL); + /* * The EEH cache might not be removed correctly because of * unbalanced kref to the device during unplug time, which -- cgit v0.10.2 From 0aab3747091db309b8a484cfd382a41644552aa3 Mon Sep 17 00:00:00 2001 From: Sam Bobroff Date: Fri, 1 May 2015 16:50:34 +1000 Subject: powerpc/powernv: Restore non-volatile CRs after nap Patches 7cba160ad "powernv/cpuidle: Redesign idle states management" and 77b54e9f2 "powernv/powerpc: Add winkle support for offline cpus" use non-volatile condition registers (cr2, cr3 and cr4) early in the system reset interrupt handler (system_reset_pSeries()) before it has been determined if state loss has occurred. If state loss has not occurred, control returns via the power7_wakeup_noloss() path which does not restore those condition registers, leaving them corrupted. Fix this by restoring the condition registers in the power7_wakeup_noloss() case. This is apparent when running a KVM guest on hardware that does not support winkle or sleep and the guest makes use of secondary threads. In practice this means Power7 machines, though some early unreleased Power8 machines may also be susceptible. The secondary CPUs are taken off line before the guest is started and they call pnv_smp_cpu_kill_self(). This checks support for sleep states (in this case there is no support) and power7_nap() is called. When the CPU is woken, power7_nap() returns and because the CPU is still off line, the main while loop executes again. The sleep states support test is executed again, but because the tested values cannot have changed, the compiler has optimized the test away and instead we rely on the result of the first test, which has been left in cr3 and/or cr4. With the result overwritten, the wrong branch is taken and power7_winkle() is called on a CPU that does not support it, leading to it stalling. Fixes: 7cba160ad789 ("powernv/cpuidle: Redesign idle states management") Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus") [mpe: Massage change log a bit more] Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index eeaa0d5..ccde8f0 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -501,9 +501,11 @@ BEGIN_FTR_SECTION CHECK_HMI_INTERRUPT END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) ld r1,PACAR1(r13) + ld r6,_CCR(r1) ld r4,_MSR(r1) ld r5,_NIP(r1) addi r1,r1,INT_FRAME_SIZE + mtcr r6 mtspr SPRN_SRR1,r4 mtspr SPRN_SRR0,r5 rfid -- cgit v0.10.2 From 5793affe8c723ece8114b898ab9003c7d97f86d1 Mon Sep 17 00:00:00 2001 From: Jeppe Ledet-Pedersen Date: Wed, 29 Apr 2015 17:05:01 +0200 Subject: net: can: xilinx_can: fix extended frame handling Using IDR_SRR in RXFIFO_ID to test for the presence of data is only valid for standard frames. For extended frames the bit is always 1 and IDR_RTR should be used instead. This patch switches the check to use CAN_RTR_FLAG which is correctly set when reading the ID. The patch also changes the DW1/DW2 to be read unconditionally, since this is necessary to remove the frame from the RXFIFO. Signed-off-by: Jeppe Ledet-Pedersen Acked-by: Kedareswara rao Appana Cc: linux-stable Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 6bddfe0..fc55e8e 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -509,10 +509,11 @@ static int xcan_rx(struct net_device *ndev) cf->can_id |= CAN_RTR_FLAG; } - if (!(id_xcan & XCAN_IDR_SRR_MASK)) { - data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); - data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + /* DW1/DW2 must always be read to remove message from RXFIFO */ + data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); + data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + if (!(cf->can_id & CAN_RTR_FLAG)) { /* Change Xilinx CAN data format to socketCAN data format */ if (cf->can_dlc > 0) *(__be32 *)(cf->data) = cpu_to_be32(data[0]); -- cgit v0.10.2 From e944ec2ca00fb0170ba9d7f2aeec32c22dc0d4ec Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 29 Apr 2015 21:08:48 +0900 Subject: perf report: Fix -T/--threads option to work again The commit 512ae1bd6acb ("perf tools: Consolidate management of default sort orders") changed default value of the 'sort_order' variable to NULL indicating that users don't set any sort keys on the command line. However it missed to update a check in perf_evlist__tty_browse_hists() so that 'perf report -T' cannot show the per-thread values after the normal output. This patch fixes it to work again. Note that the -T option only works on --stdio and neither --sort nor --parent option was given. Signed-off-by: Namhyung Kim Cc: Andi Kleen Cc: David Ahern Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1430309328-28317-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 476cdf7..b63aeda 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -329,7 +329,7 @@ static int perf_evlist__tty_browse_hists(struct perf_evlist *evlist, fprintf(stdout, "\n\n"); } - if (sort_order == default_sort_order && + if (sort_order == NULL && parent_pattern == default_parent_pattern) { fprintf(stdout, "#\n# (%s)\n#\n", help); -- cgit v0.10.2 From d3cc2e865055f58378de86c6b51a5636328ca827 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:49:44 -0700 Subject: MAINTAINERS: Update mach-bcm maintainers list Add Ray Jui and Scott Branden for the mach-bcm/ entries. Signed-off-by: Florian Fainelli diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0..ba352d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2118,6 +2118,8 @@ F: drivers/net/ethernet/broadcom/bnx2x/ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE M: Christian Daudt M: Florian Fainelli +M: Ray Jui +M: Scott Branden L: bcm-kernel-feedback-list@broadcom.com T: git git://github.com/broadcom/mach-bcm S: Maintained -- cgit v0.10.2 From 049a4c506586c293b6fe54b5c61762230417dbf8 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:50:40 -0700 Subject: MAINTAINERS: Remove Christian Daudt for mach-bcm Christian has not been responding to mach-bcm related emails since around July 2013, and with Scott and Ray maintaining the platform, we should have enough coverage to get that going now. Signed-off-by: Florian Fainelli diff --git a/MAINTAINERS b/MAINTAINERS index ba352d9..7222089 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2116,7 +2116,6 @@ S: Supported F: drivers/net/ethernet/broadcom/bnx2x/ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE -M: Christian Daudt M: Florian Fainelli M: Ray Jui M: Scott Branden -- cgit v0.10.2 From 1de2a662d0f2d3b211b7d10ea6578abe5c39eda3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 10 Apr 2015 11:52:40 -0700 Subject: MAINTAINERS: Update brcmstb entry We have not heard back from Marc in a while, since we last asked him to ack/nack this change here: https://lkml.org/lkml/2015/1/14/1004 This was back in January, we are in the 3.21^W4.1 merge window now, so, as outlined in this email thread, remove him from the MAINTAINERS list now. Signed-off-by: Florian Fainelli diff --git a/MAINTAINERS b/MAINTAINERS index 7222089..0aa1a42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2169,7 +2169,6 @@ S: Maintained F: drivers/usb/gadget/udc/bcm63xx_udc.* BROADCOM BCM7XXX ARM ARCHITECTURE -M: Marc Carino M: Brian Norris M: Gregory Fong M: Florian Fainelli -- cgit v0.10.2 From 5f55d2ae699d1756ad6132786c7f9c27dc456b66 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 28 Apr 2015 10:23:30 -0600 Subject: vfio-pci: Log device requests more verbosely Log some clues indicating whether the user is receiving device request interfaces or not listening. This can help indicate why a driver unbind is blocked or explain why QEMU automatically unplugged a device from the VM. Signed-off-by: Alex Williamson diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 69fab0f..e9851ad 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -907,8 +907,14 @@ static void vfio_pci_request(void *device_data, unsigned int count) mutex_lock(&vdev->igate); if (vdev->req_trigger) { - dev_dbg(&vdev->pdev->dev, "Requesting device from user\n"); + if (!(count % 10)) + dev_notice_ratelimited(&vdev->pdev->dev, + "Relaying device request to user (#%u)\n", + count); eventfd_signal(vdev->req_trigger, 1); + } else if (count == 0) { + dev_warn(&vdev->pdev->dev, + "No device request channel registered, blocked until released by user\n"); } mutex_unlock(&vdev->igate); -- cgit v0.10.2 From 0a73125d308c1453dada1e2998f1c7f68094c45f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 30 Apr 2015 12:55:02 -0700 Subject: power: reset: Add MFD_SYSCON depends for brcmstb The Broadcom STB reboot driver depends on MFD_SYSCON, it uses syscon_regmap_lookup_by_phandle() which will not lookup syscon phandles if MFD_SYSCON is disabled, and instead will return -ENOSYS since it is turned into an inline stub. Fixes: 030494e75064c ("power: reset: Add reboot driver for brcmstb") Signed-off-by: Florian Fainelli Signed-off-by: Sebastian Reichel diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index aad9c33..17d93a7 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -41,6 +41,7 @@ config POWER_RESET_AXXIA config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST + depends on MFD_SYSCON default ARCH_BRCMSTB help This driver provides restart support for Broadcom STB boards. -- cgit v0.10.2 From 5de0b4d0cd153c471640b13aae6ae6d18d0a4603 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 May 2015 16:56:45 -0400 Subject: ext4 crypto: simplify and speed up filename encryption Avoid using SHA-1 when calculating the user-visible filename when the encryption key is available, and avoid decrypting lots of filenames when searching for a directory entry in a directory block. Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63 Signed-off-by: Theodore Ts'o diff --git a/fs/ext4/crypto_fname.c b/fs/ext4/crypto_fname.c index ca2f594..7a877e6 100644 --- a/fs/ext4/crypto_fname.c +++ b/fs/ext4/crypto_fname.c @@ -198,106 +198,57 @@ static int ext4_fname_decrypt(struct ext4_fname_crypto_ctx *ctx, return oname->len; } +static const char *lookup_table = + "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+,"; + /** * ext4_fname_encode_digest() - * * Encodes the input digest using characters from the set [a-zA-Z0-9_+]. * The encoded string is roughly 4/3 times the size of the input string. */ -int ext4_fname_encode_digest(char *dst, char *src, u32 len) +static int digest_encode(const char *src, int len, char *dst) { - static const char *lookup_table = - "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_+"; - u32 current_chunk, num_chunks, i; - char tmp_buf[3]; - u32 c0, c1, c2, c3; - - current_chunk = 0; - num_chunks = len/3; - for (i = 0; i < num_chunks; i++) { - c0 = src[3*i] & 0x3f; - c1 = (((src[3*i]>>6)&0x3) | ((src[3*i+1] & 0xf)<<2)) & 0x3f; - c2 = (((src[3*i+1]>>4)&0xf) | ((src[3*i+2] & 0x3)<<4)) & 0x3f; - c3 = (src[3*i+2]>>2) & 0x3f; - dst[4*i] = lookup_table[c0]; - dst[4*i+1] = lookup_table[c1]; - dst[4*i+2] = lookup_table[c2]; - dst[4*i+3] = lookup_table[c3]; - } - if (i*3 < len) { - memset(tmp_buf, 0, 3); - memcpy(tmp_buf, &src[3*i], len-3*i); - c0 = tmp_buf[0] & 0x3f; - c1 = (((tmp_buf[0]>>6)&0x3) | ((tmp_buf[1] & 0xf)<<2)) & 0x3f; - c2 = (((tmp_buf[1]>>4)&0xf) | ((tmp_buf[2] & 0x3)<<4)) & 0x3f; - c3 = (tmp_buf[2]>>2) & 0x3f; - dst[4*i] = lookup_table[c0]; - dst[4*i+1] = lookup_table[c1]; - dst[4*i+2] = lookup_table[c2]; - dst[4*i+3] = lookup_table[c3]; + int i = 0, bits = 0, ac = 0; + char *cp = dst; + + while (i < len) { + ac += (((unsigned char) src[i]) << bits); + bits += 8; + do { + *cp++ = lookup_table[ac & 0x3f]; + ac >>= 6; + bits -= 6; + } while (bits >= 6); i++; } - return (i * 4); + if (bits) + *cp++ = lookup_table[ac & 0x3f]; + return cp - dst; } -/** - * ext4_fname_hash() - - * - * This function computes the hash of the input filename, and sets the output - * buffer to the *encoded* digest. It returns the length of the digest as its - * return value. Errors are returned as negative numbers. We trust the caller - * to allocate sufficient memory to oname string. - */ -static int ext4_fname_hash(struct ext4_fname_crypto_ctx *ctx, - const struct ext4_str *iname, - struct ext4_str *oname) +static int digest_decode(const char *src, int len, char *dst) { - struct scatterlist sg; - struct hash_desc desc = { - .tfm = (struct crypto_hash *)ctx->htfm, - .flags = CRYPTO_TFM_REQ_MAY_SLEEP - }; - int res = 0; - - if (iname->len <= EXT4_FNAME_CRYPTO_DIGEST_SIZE) { - res = ext4_fname_encode_digest(oname->name, iname->name, - iname->len); - oname->len = res; - return res; - } - - sg_init_one(&sg, iname->name, iname->len); - res = crypto_hash_init(&desc); - if (res) { - printk(KERN_ERR - "%s: Error initializing crypto hash; res = [%d]\n", - __func__, res); - goto out; - } - res = crypto_hash_update(&desc, &sg, iname->len); - if (res) { - printk(KERN_ERR - "%s: Error updating crypto hash; res = [%d]\n", - __func__, res); - goto out; - } - res = crypto_hash_final(&desc, - &oname->name[EXT4_FNAME_CRYPTO_DIGEST_SIZE]); - if (res) { - printk(KERN_ERR - "%s: Error finalizing crypto hash; res = [%d]\n", - __func__, res); - goto out; + int i = 0, bits = 0, ac = 0; + const char *p; + char *cp = dst; + + while (i < len) { + p = strchr(lookup_table, src[i]); + if (p == NULL || src[i] == 0) + return -2; + ac += (p - lookup_table) << bits; + bits += 6; + if (bits >= 8) { + *cp++ = ac & 0xff; + ac >>= 8; + bits -= 8; + } + i++; } - /* Encode the digest as a printable string--this will increase the - * size of the digest */ - oname->name[0] = 'I'; - res = ext4_fname_encode_digest(oname->name+1, - &oname->name[EXT4_FNAME_CRYPTO_DIGEST_SIZE], - EXT4_FNAME_CRYPTO_DIGEST_SIZE) + 1; - oname->len = res; -out: - return res; + if (ac) + return -1; + return cp - dst; } /** @@ -571,9 +522,13 @@ void ext4_fname_crypto_free_buffer(struct ext4_str *crypto_str) * ext4_fname_disk_to_usr() - converts a filename from disk space to user space */ int _ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx, - const struct ext4_str *iname, - struct ext4_str *oname) + struct dx_hash_info *hinfo, + const struct ext4_str *iname, + struct ext4_str *oname) { + char buf[24]; + int ret; + if (ctx == NULL) return -EIO; if (iname->len < 3) { @@ -587,18 +542,33 @@ int _ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx, } if (ctx->has_valid_key) return ext4_fname_decrypt(ctx, iname, oname); - else - return ext4_fname_hash(ctx, iname, oname); + + if (iname->len <= EXT4_FNAME_CRYPTO_DIGEST_SIZE) { + ret = digest_encode(iname->name, iname->len, oname->name); + oname->len = ret; + return ret; + } + if (hinfo) { + memcpy(buf, &hinfo->hash, 4); + memcpy(buf+4, &hinfo->minor_hash, 4); + } else + memset(buf, 0, 8); + memcpy(buf + 8, iname->name + iname->len - 16, 16); + oname->name[0] = '_'; + ret = digest_encode(buf, 24, oname->name+1); + oname->len = ret + 1; + return ret + 1; } int ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx, + struct dx_hash_info *hinfo, const struct ext4_dir_entry_2 *de, struct ext4_str *oname) { struct ext4_str iname = {.name = (unsigned char *) de->name, .len = de->name_len }; - return _ext4_fname_disk_to_usr(ctx, &iname, oname); + return _ext4_fname_disk_to_usr(ctx, hinfo, &iname, oname); } @@ -640,10 +610,11 @@ int ext4_fname_usr_to_hash(struct ext4_fname_crypto_ctx *ctx, const struct qstr *iname, struct dx_hash_info *hinfo) { - struct ext4_str tmp, tmp2; + struct ext4_str tmp; int ret = 0; + char buf[EXT4_FNAME_CRYPTO_DIGEST_SIZE+1]; - if (!ctx || !ctx->has_valid_key || + if (!ctx || ((iname->name[0] == '.') && ((iname->len == 1) || ((iname->name[1] == '.') && (iname->len == 2))))) { @@ -651,59 +622,90 @@ int ext4_fname_usr_to_hash(struct ext4_fname_crypto_ctx *ctx, return 0; } + if (!ctx->has_valid_key && iname->name[0] == '_') { + if (iname->len != 33) + return -ENOENT; + ret = digest_decode(iname->name+1, iname->len, buf); + if (ret != 24) + return -ENOENT; + memcpy(&hinfo->hash, buf, 4); + memcpy(&hinfo->minor_hash, buf + 4, 4); + return 0; + } + + if (!ctx->has_valid_key && iname->name[0] != '_') { + if (iname->len > 43) + return -ENOENT; + ret = digest_decode(iname->name, iname->len, buf); + ext4fs_dirhash(buf, ret, hinfo); + return 0; + } + /* First encrypt the plaintext name */ ret = ext4_fname_crypto_alloc_buffer(ctx, iname->len, &tmp); if (ret < 0) return ret; ret = ext4_fname_encrypt(ctx, iname, &tmp); - if (ret < 0) - goto out; - - tmp2.len = (4 * ((EXT4_FNAME_CRYPTO_DIGEST_SIZE + 2) / 3)) + 1; - tmp2.name = kmalloc(tmp2.len + 1, GFP_KERNEL); - if (tmp2.name == NULL) { - ret = -ENOMEM; - goto out; + if (ret >= 0) { + ext4fs_dirhash(tmp.name, tmp.len, hinfo); + ret = 0; } - ret = ext4_fname_hash(ctx, &tmp, &tmp2); - if (ret > 0) - ext4fs_dirhash(tmp2.name, tmp2.len, hinfo); - ext4_fname_crypto_free_buffer(&tmp2); -out: ext4_fname_crypto_free_buffer(&tmp); return ret; } -/** - * ext4_fname_disk_to_htree() - converts a filename from disk space to htree-access string - */ -int ext4_fname_disk_to_hash(struct ext4_fname_crypto_ctx *ctx, - const struct ext4_dir_entry_2 *de, - struct dx_hash_info *hinfo) +int ext4_fname_match(struct ext4_fname_crypto_ctx *ctx, struct ext4_str *cstr, + int len, const char * const name, + struct ext4_dir_entry_2 *de) { - struct ext4_str iname = {.name = (unsigned char *) de->name, - .len = de->name_len}; - struct ext4_str tmp; - int ret; + int ret = -ENOENT; + int bigname = (*name == '_'); - if (!ctx || - ((iname.name[0] == '.') && - ((iname.len == 1) || - ((iname.name[1] == '.') && (iname.len == 2))))) { - ext4fs_dirhash(iname.name, iname.len, hinfo); - return 0; + if (ctx->has_valid_key) { + if (cstr->name == NULL) { + struct qstr istr; + + ret = ext4_fname_crypto_alloc_buffer(ctx, len, cstr); + if (ret < 0) + goto errout; + istr.name = name; + istr.len = len; + ret = ext4_fname_encrypt(ctx, &istr, cstr); + if (ret < 0) + goto errout; + } + } else { + if (cstr->name == NULL) { + cstr->name = kmalloc(32, GFP_KERNEL); + if (cstr->name == NULL) + return -ENOMEM; + if ((bigname && (len != 33)) || + (!bigname && (len > 43))) + goto errout; + ret = digest_decode(name+bigname, len-bigname, + cstr->name); + if (ret < 0) { + ret = -ENOENT; + goto errout; + } + cstr->len = ret; + } + if (bigname) { + if (de->name_len < 16) + return 0; + ret = memcmp(de->name + de->name_len - 16, + cstr->name + 8, 16); + return (ret == 0) ? 1 : 0; + } } - - tmp.len = (4 * ((EXT4_FNAME_CRYPTO_DIGEST_SIZE + 2) / 3)) + 1; - tmp.name = kmalloc(tmp.len + 1, GFP_KERNEL); - if (tmp.name == NULL) - return -ENOMEM; - - ret = ext4_fname_hash(ctx, &iname, &tmp); - if (ret > 0) - ext4fs_dirhash(tmp.name, tmp.len, hinfo); - ext4_fname_crypto_free_buffer(&tmp); + if (de->name_len != cstr->len) + return 0; + ret = memcmp(de->name, cstr->name, cstr->len); + return (ret == 0) ? 1 : 0; +errout: + kfree(cstr->name); + cstr->name = NULL; return ret; } diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index 61db51a5..5665d82 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -249,7 +249,7 @@ static int ext4_readdir(struct file *file, struct dir_context *ctx) } else { /* Directory is encrypted */ err = ext4_fname_disk_to_usr(enc_ctx, - de, &fname_crypto_str); + NULL, de, &fname_crypto_str); if (err < 0) goto errout; if (!dir_emit(ctx, diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 0179654..dfb1138 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2093,9 +2093,11 @@ u32 ext4_fname_crypto_round_up(u32 size, u32 blksize); int ext4_fname_crypto_alloc_buffer(struct ext4_fname_crypto_ctx *ctx, u32 ilen, struct ext4_str *crypto_str); int _ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx, + struct dx_hash_info *hinfo, const struct ext4_str *iname, struct ext4_str *oname); int ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx, + struct dx_hash_info *hinfo, const struct ext4_dir_entry_2 *de, struct ext4_str *oname); int ext4_fname_usr_to_disk(struct ext4_fname_crypto_ctx *ctx, @@ -2104,11 +2106,12 @@ int ext4_fname_usr_to_disk(struct ext4_fname_crypto_ctx *ctx, int ext4_fname_usr_to_hash(struct ext4_fname_crypto_ctx *ctx, const struct qstr *iname, struct dx_hash_info *hinfo); -int ext4_fname_disk_to_hash(struct ext4_fname_crypto_ctx *ctx, - const struct ext4_dir_entry_2 *de, - struct dx_hash_info *hinfo); int ext4_fname_crypto_namelen_on_disk(struct ext4_fname_crypto_ctx *ctx, u32 namelen); +int ext4_fname_match(struct ext4_fname_crypto_ctx *ctx, struct ext4_str *cstr, + int len, const char * const name, + struct ext4_dir_entry_2 *de); + #ifdef CONFIG_EXT4_FS_ENCRYPTION void ext4_put_fname_crypto_ctx(struct ext4_fname_crypto_ctx **ctx); diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 4f87127..5ea7371 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -640,7 +640,7 @@ static struct stats dx_show_leaf(struct inode *dir, ext4_put_fname_crypto_ctx(&ctx); ctx = NULL; } - res = ext4_fname_disk_to_usr(ctx, de, + res = ext4_fname_disk_to_usr(ctx, NULL, de, &fname_crypto_str); if (res < 0) { printk(KERN_WARNING "Error " @@ -653,15 +653,8 @@ static struct stats dx_show_leaf(struct inode *dir, name = fname_crypto_str.name; len = fname_crypto_str.len; } - res = ext4_fname_disk_to_hash(ctx, de, - &h); - if (res < 0) { - printk(KERN_WARNING "Error " - "converting filename " - "from disk to htree" - "\n"); - h.hash = 0xDEADBEEF; - } + ext4fs_dirhash(de->name, de->name_len, + &h); printk("%*.s:(E)%x.%u ", len, name, h.hash, (unsigned) ((char *) de - base)); @@ -1008,15 +1001,7 @@ static int htree_dirblock_to_tree(struct file *dir_file, /* silently ignore the rest of the block */ break; } -#ifdef CONFIG_EXT4_FS_ENCRYPTION - err = ext4_fname_disk_to_hash(ctx, de, hinfo); - if (err < 0) { - count = err; - goto errout; - } -#else ext4fs_dirhash(de->name, de->name_len, hinfo); -#endif if ((hinfo->hash < start_hash) || ((hinfo->hash == start_hash) && (hinfo->minor_hash < start_minor_hash))) @@ -1032,7 +1017,7 @@ static int htree_dirblock_to_tree(struct file *dir_file, &tmp_str); } else { /* Directory is encrypted */ - err = ext4_fname_disk_to_usr(ctx, de, + err = ext4_fname_disk_to_usr(ctx, hinfo, de, &fname_crypto_str); if (err < 0) { count = err; @@ -1193,26 +1178,10 @@ static int dx_make_map(struct inode *dir, struct ext4_dir_entry_2 *de, int count = 0; char *base = (char *) de; struct dx_hash_info h = *hinfo; -#ifdef CONFIG_EXT4_FS_ENCRYPTION - struct ext4_fname_crypto_ctx *ctx = NULL; - int err; - - ctx = ext4_get_fname_crypto_ctx(dir, EXT4_NAME_LEN); - if (IS_ERR(ctx)) - return PTR_ERR(ctx); -#endif while ((char *) de < base + blocksize) { if (de->name_len && de->inode) { -#ifdef CONFIG_EXT4_FS_ENCRYPTION - err = ext4_fname_disk_to_hash(ctx, de, &h); - if (err < 0) { - ext4_put_fname_crypto_ctx(&ctx); - return err; - } -#else ext4fs_dirhash(de->name, de->name_len, &h); -#endif map_tail--; map_tail->hash = h.hash; map_tail->offs = ((char *) de - base)>>2; @@ -1223,9 +1192,6 @@ static int dx_make_map(struct inode *dir, struct ext4_dir_entry_2 *de, /* XXX: do we need to check rec_len == 0 case? -Chris */ de = ext4_next_entry(de, blocksize); } -#ifdef CONFIG_EXT4_FS_ENCRYPTION - ext4_put_fname_crypto_ctx(&ctx); -#endif return count; } @@ -1287,16 +1253,8 @@ static inline int ext4_match(struct ext4_fname_crypto_ctx *ctx, return 0; #ifdef CONFIG_EXT4_FS_ENCRYPTION - if (ctx) { - /* Directory is encrypted */ - res = ext4_fname_disk_to_usr(ctx, de, fname_crypto_str); - if (res < 0) - return res; - if (len != res) - return 0; - res = memcmp(name, fname_crypto_str->name, len); - return (res == 0) ? 1 : 0; - } + if (ctx) + return ext4_fname_match(ctx, fname_crypto_str, len, name, de); #endif if (len != de->name_len) return 0; @@ -1324,16 +1282,6 @@ int search_dir(struct buffer_head *bh, char *search_buf, int buf_size, if (IS_ERR(ctx)) return -1; - if (ctx != NULL) { - /* Allocate buffer to hold maximum name length */ - res = ext4_fname_crypto_alloc_buffer(ctx, EXT4_NAME_LEN, - &fname_crypto_str); - if (res < 0) { - ext4_put_fname_crypto_ctx(&ctx); - return -1; - } - } - de = (struct ext4_dir_entry_2 *)search_buf; dlimit = search_buf + buf_size; while ((char *) de < dlimit) { @@ -1872,14 +1820,6 @@ int ext4_find_dest_de(struct inode *dir, struct inode *inode, return res; } reclen = EXT4_DIR_REC_LEN(res); - - /* Allocate buffer to hold maximum name length */ - res = ext4_fname_crypto_alloc_buffer(ctx, EXT4_NAME_LEN, - &fname_crypto_str); - if (res < 0) { - ext4_put_fname_crypto_ctx(&ctx); - return -1; - } } de = (struct ext4_dir_entry_2 *)buf; diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c index 136ca0e..ce2ed28 100644 --- a/fs/ext4/symlink.c +++ b/fs/ext4/symlink.c @@ -74,7 +74,7 @@ static void *ext4_follow_link(struct dentry *dentry, struct nameidata *nd) goto errout; } pstr.name = paddr; - res = _ext4_fname_disk_to_usr(ctx, &cstr, &pstr); + res = _ext4_fname_disk_to_usr(ctx, NULL, &cstr, &pstr); if (res < 0) goto errout; /* Null-terminate the name */ -- cgit v0.10.2 From a44cd7a05496d60fd2ba8cca080e3db8f481549b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 May 2015 16:56:50 -0400 Subject: ext4 crypto: add padding to filenames before encrypting This obscures the length of the filenames, to decrease the amount of information leakage. By default, we pad the filenames to the next 4 byte boundaries. This costs nothing, since the directory entries are aligned to 4 byte boundaries anyway. Filenames can also be padded to 8, 16, or 32 bytes, which will consume more directory space. Change-Id: Ibb7a0fb76d2c48e2061240a709358ff40b14f322 Signed-off-by: Theodore Ts'o diff --git a/fs/ext4/crypto_fname.c b/fs/ext4/crypto_fname.c index 7a877e6..fded02f 100644 --- a/fs/ext4/crypto_fname.c +++ b/fs/ext4/crypto_fname.c @@ -66,6 +66,7 @@ static int ext4_fname_encrypt(struct ext4_fname_crypto_ctx *ctx, int res = 0; char iv[EXT4_CRYPTO_BLOCK_SIZE]; struct scatterlist sg[1]; + int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK); char *workbuf; if (iname->len <= 0 || iname->len > ctx->lim) @@ -73,6 +74,7 @@ static int ext4_fname_encrypt(struct ext4_fname_crypto_ctx *ctx, ciphertext_len = (iname->len < EXT4_CRYPTO_BLOCK_SIZE) ? EXT4_CRYPTO_BLOCK_SIZE : iname->len; + ciphertext_len = ext4_fname_crypto_round_up(ciphertext_len, padding); ciphertext_len = (ciphertext_len > ctx->lim) ? ctx->lim : ciphertext_len; @@ -101,7 +103,7 @@ static int ext4_fname_encrypt(struct ext4_fname_crypto_ctx *ctx, /* Create encryption request */ sg_init_table(sg, 1); sg_set_page(sg, ctx->workpage, PAGE_SIZE, 0); - ablkcipher_request_set_crypt(req, sg, sg, iname->len, iv); + ablkcipher_request_set_crypt(req, sg, sg, ciphertext_len, iv); res = crypto_ablkcipher_encrypt(req); if (res == -EINPROGRESS || res == -EBUSY) { BUG_ON(req->base.data != &ecr); @@ -356,6 +358,7 @@ struct ext4_fname_crypto_ctx *ext4_get_fname_crypto_ctx( if (IS_ERR(ctx)) return ctx; + ctx->flags = ei->i_crypt_policy_flags; if (ctx->has_valid_key) { if (ctx->key.mode != EXT4_ENCRYPTION_MODE_AES_256_CTS) { printk_once(KERN_WARNING @@ -468,6 +471,7 @@ int ext4_fname_crypto_namelen_on_disk(struct ext4_fname_crypto_ctx *ctx, u32 namelen) { u32 ciphertext_len; + int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK); if (ctx == NULL) return -EIO; @@ -475,6 +479,7 @@ int ext4_fname_crypto_namelen_on_disk(struct ext4_fname_crypto_ctx *ctx, return -EACCES; ciphertext_len = (namelen < EXT4_CRYPTO_BLOCK_SIZE) ? EXT4_CRYPTO_BLOCK_SIZE : namelen; + ciphertext_len = ext4_fname_crypto_round_up(ciphertext_len, padding); ciphertext_len = (ciphertext_len > ctx->lim) ? ctx->lim : ciphertext_len; return (int) ciphertext_len; @@ -490,10 +495,13 @@ int ext4_fname_crypto_alloc_buffer(struct ext4_fname_crypto_ctx *ctx, u32 ilen, struct ext4_str *crypto_str) { unsigned int olen; + int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK); if (!ctx) return -EIO; - olen = ext4_fname_crypto_round_up(ilen, EXT4_CRYPTO_BLOCK_SIZE); + if (padding < EXT4_CRYPTO_BLOCK_SIZE) + padding = EXT4_CRYPTO_BLOCK_SIZE; + olen = ext4_fname_crypto_round_up(ilen, padding); crypto_str->len = olen; if (olen < EXT4_FNAME_CRYPTO_DIGEST_SIZE*2) olen = EXT4_FNAME_CRYPTO_DIGEST_SIZE*2; diff --git a/fs/ext4/crypto_key.c b/fs/ext4/crypto_key.c index c8392af..52170d0 100644 --- a/fs/ext4/crypto_key.c +++ b/fs/ext4/crypto_key.c @@ -110,6 +110,7 @@ int ext4_generate_encryption_key(struct inode *inode) } res = 0; + ei->i_crypt_policy_flags = ctx.flags; if (S_ISREG(inode->i_mode)) crypt_key->mode = ctx.contents_encryption_mode; else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) diff --git a/fs/ext4/crypto_policy.c b/fs/ext4/crypto_policy.c index 30eaf9e..a6d6291 100644 --- a/fs/ext4/crypto_policy.c +++ b/fs/ext4/crypto_policy.c @@ -37,6 +37,8 @@ static int ext4_is_encryption_context_consistent_with_policy( return 0; return (memcmp(ctx.master_key_descriptor, policy->master_key_descriptor, EXT4_KEY_DESCRIPTOR_SIZE) == 0 && + (ctx.flags == + policy->flags) && (ctx.contents_encryption_mode == policy->contents_encryption_mode) && (ctx.filenames_encryption_mode == @@ -56,25 +58,25 @@ static int ext4_create_encryption_context_from_policy( printk(KERN_WARNING "%s: Invalid contents encryption mode %d\n", __func__, policy->contents_encryption_mode); - res = -EINVAL; - goto out; + return -EINVAL; } if (!ext4_valid_filenames_enc_mode(policy->filenames_encryption_mode)) { printk(KERN_WARNING "%s: Invalid filenames encryption mode %d\n", __func__, policy->filenames_encryption_mode); - res = -EINVAL; - goto out; + return -EINVAL; } + if (policy->flags & ~EXT4_POLICY_FLAGS_VALID) + return -EINVAL; ctx.contents_encryption_mode = policy->contents_encryption_mode; ctx.filenames_encryption_mode = policy->filenames_encryption_mode; + ctx.flags = policy->flags; BUILD_BUG_ON(sizeof(ctx.nonce) != EXT4_KEY_DERIVATION_NONCE_SIZE); get_random_bytes(ctx.nonce, EXT4_KEY_DERIVATION_NONCE_SIZE); res = ext4_xattr_set(inode, EXT4_XATTR_INDEX_ENCRYPTION, EXT4_XATTR_NAME_ENCRYPTION_CONTEXT, &ctx, sizeof(ctx), 0); -out: if (!res) ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT); return res; @@ -115,6 +117,7 @@ int ext4_get_policy(struct inode *inode, struct ext4_encryption_policy *policy) policy->version = 0; policy->contents_encryption_mode = ctx.contents_encryption_mode; policy->filenames_encryption_mode = ctx.filenames_encryption_mode; + policy->flags = ctx.flags; memcpy(&policy->master_key_descriptor, ctx.master_key_descriptor, EXT4_KEY_DESCRIPTOR_SIZE); return 0; @@ -176,6 +179,7 @@ int ext4_inherit_context(struct inode *parent, struct inode *child) EXT4_ENCRYPTION_MODE_AES_256_XTS; ctx.filenames_encryption_mode = EXT4_ENCRYPTION_MODE_AES_256_CTS; + ctx.flags = 0; memset(ctx.master_key_descriptor, 0x42, EXT4_KEY_DESCRIPTOR_SIZE); res = 0; diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index dfb1138..bca1bdc 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -911,6 +911,7 @@ struct ext4_inode_info { /* on-disk additional length */ __u16 i_extra_isize; + char i_crypt_policy_flags; /* Indicate the inline data space. */ u16 i_inline_off; diff --git a/fs/ext4/ext4_crypto.h b/fs/ext4/ext4_crypto.h index c2ba35a..d75159c 100644 --- a/fs/ext4/ext4_crypto.h +++ b/fs/ext4/ext4_crypto.h @@ -20,12 +20,20 @@ struct ext4_encryption_policy { char version; char contents_encryption_mode; char filenames_encryption_mode; + char flags; char master_key_descriptor[EXT4_KEY_DESCRIPTOR_SIZE]; } __attribute__((__packed__)); #define EXT4_ENCRYPTION_CONTEXT_FORMAT_V1 1 #define EXT4_KEY_DERIVATION_NONCE_SIZE 16 +#define EXT4_POLICY_FLAGS_PAD_4 0x00 +#define EXT4_POLICY_FLAGS_PAD_8 0x01 +#define EXT4_POLICY_FLAGS_PAD_16 0x02 +#define EXT4_POLICY_FLAGS_PAD_32 0x03 +#define EXT4_POLICY_FLAGS_PAD_MASK 0x03 +#define EXT4_POLICY_FLAGS_VALID 0x03 + /** * Encryption context for inode * @@ -41,7 +49,7 @@ struct ext4_encryption_context { char format; char contents_encryption_mode; char filenames_encryption_mode; - char reserved; + char flags; char master_key_descriptor[EXT4_KEY_DESCRIPTOR_SIZE]; char nonce[EXT4_KEY_DERIVATION_NONCE_SIZE]; } __attribute__((__packed__)); @@ -120,6 +128,7 @@ struct ext4_fname_crypto_ctx { struct crypto_hash *htfm; struct page *workpage; struct ext4_encryption_key key; + unsigned flags : 8; unsigned has_valid_key : 1; unsigned ctfm_key_is_ready : 1; }; -- cgit v0.10.2 From 8ebb7e9c1a502cfc300618c19c3c6f06fc76d237 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Thu, 30 Apr 2015 22:05:58 +0200 Subject: power: bq27x00_battery: Add missing MODULE_ALIAS Without MODULE_ALIAS bq27x00_battery module won't get loaded automatically. Signed-off-by: Marek Belisko Signed-off-by: Sebastian Reichel diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index a57433d..b6b9837 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -1109,6 +1109,14 @@ static void __exit bq27x00_battery_exit(void) } module_exit(bq27x00_battery_exit); +#ifdef CONFIG_BATTERY_BQ27X00_PLATFORM +MODULE_ALIAS("platform:bq27000-battery"); +#endif + +#ifdef CONFIG_BATTERY_BQ27X00_I2C +MODULE_ALIAS("i2c:bq27000-battery"); +#endif + MODULE_AUTHOR("Rodolfo Giometti "); MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From db7d4d7f40215843000cb9d441c9149fd42ea36b Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2015 16:31:41 -0600 Subject: vfio: Fix runaway interruptible timeout Commit 13060b64b819 ("vfio: Add and use device request op for vfio bus drivers") incorrectly makes use of an interruptible timeout. When interrupted, the signal remains pending resulting in subsequent timeouts occurring instantly. This makes the loop spin at a much higher rate than intended. Instead of making this completely non-interruptible, we can change this into a sort of interruptible-once behavior and use the "once" to log debug information. The driver API doesn't allow us to abort and return an error code. Signed-off-by: Alex Williamson Fixes: 13060b64b819 Cc: stable@vger.kernel.org # v4.0 diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 0d33662..e1278fe 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -710,6 +710,8 @@ void *vfio_del_group_dev(struct device *dev) void *device_data = device->device_data; struct vfio_unbound_dev *unbound; unsigned int i = 0; + long ret; + bool interrupted = false; /* * The group exists so long as we have a device reference. Get @@ -755,9 +757,22 @@ void *vfio_del_group_dev(struct device *dev) vfio_device_put(device); - } while (wait_event_interruptible_timeout(vfio.release_q, - !vfio_dev_present(group, dev), - HZ * 10) <= 0); + if (interrupted) { + ret = wait_event_timeout(vfio.release_q, + !vfio_dev_present(group, dev), HZ * 10); + } else { + ret = wait_event_interruptible_timeout(vfio.release_q, + !vfio_dev_present(group, dev), HZ * 10); + if (ret == -ERESTARTSYS) { + interrupted = true; + dev_warn(dev, + "Device is currently in use, task" + " \"%s\" (%d) " + "blocked until device is released", + current->comm, task_pid_nr(current)); + } + } + } while (ret <= 0); vfio_group_put(group); -- cgit v0.10.2 From fb63e5489f7ef5bb4d1a655984ca7ef98ffc5849 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 2 May 2015 10:29:19 -0400 Subject: ext4 crypto: do not select from EXT4_FS_ENCRYPTION This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by: Herbert Xu Signed-off-by: Theodore Ts'o diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 18228c2..024f228 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -64,8 +64,8 @@ config EXT4_FS_SECURITY If you are not using a security module that requires using extended attributes for file security labels, say N. -config EXT4_FS_ENCRYPTION - bool "Ext4 Encryption" +config EXT4_ENCRYPTION + tristate "Ext4 Encryption" depends on EXT4_FS select CRYPTO_AES select CRYPTO_CBC @@ -81,6 +81,11 @@ config EXT4_FS_ENCRYPTION efficient since it avoids caching the encrypted and decrypted pages in the page cache. +config EXT4_FS_ENCRYPTION + bool + default y + depends on EXT4_ENCRYPTION + config EXT4_DEBUG bool "EXT4 debugging support" depends on EXT4_FS -- cgit v0.10.2 From 9402bdcacdfedf7219a17e4d93300058a8e2aa4c Mon Sep 17 00:00:00 2001 From: Chanho Park Date: Sat, 2 May 2015 10:29:22 -0400 Subject: ext4 crypto: remove duplicated encryption mode definitions This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d and commit f542fb. Cc: Theodore Ts'o Cc: Michael Halcrow Cc: Andreas Dilger Signed-off-by: Chanho Park Signed-off-by: Theodore Ts'o diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index bca1bdc..1de8c7f 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1067,12 +1067,6 @@ extern void ext4_set_bits(void *bm, int cur, int len); /* Metadata checksum algorithm codes */ #define EXT4_CRC32C_CHKSUM 1 -/* Encryption algorithms */ -#define EXT4_ENCRYPTION_MODE_INVALID 0 -#define EXT4_ENCRYPTION_MODE_AES_256_XTS 1 -#define EXT4_ENCRYPTION_MODE_AES_256_GCM 2 -#define EXT4_ENCRYPTION_MODE_AES_256_CBC 3 - /* * Structure of the super block */ -- cgit v0.10.2 From d2dc317d564a46dfc683978a2e5a4f91434e9711 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Sat, 2 May 2015 21:36:55 -0400 Subject: ext4: fix data corruption caused by unwritten and delayed extents Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: Lukas Czerner Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index d33d5a6..26724ae 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -703,6 +703,14 @@ int ext4_es_insert_extent(struct inode *inode, ext4_lblk_t lblk, BUG_ON(end < lblk); + if ((status & EXTENT_STATUS_DELAYED) && + (status & EXTENT_STATUS_WRITTEN)) { + ext4_warning(inode->i_sb, "Inserting extent [%u/%u] as " + " delayed and written which can potentially " + " cause data loss.\n", lblk, len); + WARN_ON(1); + } + newes.es_lblk = lblk; newes.es_len = len; ext4_es_store_pblock_status(&newes, pblk, status); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index f6b35d8..4415cea 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -532,6 +532,7 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode, status = map->m_flags & EXT4_MAP_UNWRITTEN ? EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) && + !(status & EXTENT_STATUS_WRITTEN) && ext4_find_delalloc_range(inode, map->m_lblk, map->m_lblk + map->m_len - 1)) status |= EXTENT_STATUS_DELAYED; @@ -636,6 +637,7 @@ found: status = map->m_flags & EXT4_MAP_UNWRITTEN ? EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) && + !(status & EXTENT_STATUS_WRITTEN) && ext4_find_delalloc_range(inode, map->m_lblk, map->m_lblk + map->m_len - 1)) status |= EXTENT_STATUS_DELAYED; -- cgit v0.10.2 From 280227a75b56ab5d35854f3a77ef74a7ad56a203 Mon Sep 17 00:00:00 2001 From: Davide Italiano Date: Sat, 2 May 2015 23:21:15 -0400 Subject: ext4: move check under lock scope to close a race. fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: Davide Italiano Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 973816b..d74e0802 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -4927,13 +4927,6 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len) if (ret) return ret; - /* - * currently supporting (pre)allocate mode for extent-based - * files _only_ - */ - if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) - return -EOPNOTSUPP; - if (mode & FALLOC_FL_COLLAPSE_RANGE) return ext4_collapse_range(inode, offset, len); @@ -4955,6 +4948,14 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len) mutex_lock(&inode->i_mutex); + /* + * We only support preallocation for extent-based files only + */ + if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { + ret = -EOPNOTSUPP; + goto out; + } + if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > i_size_read(inode)) { new_size = offset + len; -- cgit v0.10.2 From 2c869b262a10ca99cb866d04087d75311587a30c Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sat, 2 May 2015 23:58:32 -0400 Subject: ext4: fix growing of tiny filesystems The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Reviewed-by: Eric Sandeen diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 8a8ec62..cf0c472 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1432,12 +1432,15 @@ static int ext4_flex_group_add(struct super_block *sb, goto exit; /* * We will always be modifying at least the superblock and GDT - * block. If we are adding a group past the last current GDT block, + * blocks. If we are adding a group past the last current GDT block, * we will also modify the inode and the dindirect block. If we * are adding a group with superblock/GDT backups we will also * modify each of the reserved GDT dindirect blocks. */ - credit = flex_gd->count * 4 + reserved_gdb; + credit = 3; /* sb, resize inode, resize inode dindirect */ + /* GDT blocks */ + credit += 1 + DIV_ROUND_UP(flex_gd->count, EXT4_DESC_PER_BLOCK(sb)); + credit += reserved_gdb; /* Reserved GDT dindirect blocks */ handle = ext4_journal_start_sb(sb, EXT4_HT_RESIZE, credit); if (IS_ERR(handle)) { err = PTR_ERR(handle); -- cgit v0.10.2 From 9b071a43553d6b2df4364951639f61076a8dd676 Mon Sep 17 00:00:00 2001 From: Philippe Coval Date: Sat, 2 May 2015 15:14:08 +0200 Subject: ideapad_laptop: Add Lenovo G40-30 to devices without radio switch Lenovo G40-30 does not provide any physical radio switch to user. Therefore disable the rfkill switch identically to the Yoga 2 approach. (Note for later, models ids are sorted alphabetically). Benefit is to make wireless available again without unloading module. It was tested successfully on 4.1.0-rc1 base with this model: (LENOVO_MT_80FY_BU_idea_FM_Lenovo G40-30). BugLink: https://bugs.launchpad.net/ideapad-laptop/+bug/1450946 Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Philippe Coval Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index b3d419a..b496db8 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -830,6 +830,13 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) */ static const struct dmi_system_id no_hw_rfkill_list[] = { { + .ident = "Lenovo G40-30", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"), + }, + }, + { .ident = "Lenovo Yoga 2 11 / 13 / Pro", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), -- cgit v0.10.2 From f673821864899153142365aca888435815ac93f0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 8 Apr 2015 20:51:57 +0200 Subject: ath9k: fix per-packet tx power configuration Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 0acd079..3ad79bb 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1103,28 +1103,14 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, struct sk_buff *skb; struct ath_frame_info *fi; struct ieee80211_tx_info *info; - struct ieee80211_vif *vif; struct ath_hw *ah = sc->sc_ah; if (sc->tx99_state || !ah->tpc_enabled) return MAX_RATE_POWER; skb = bf->bf_mpdu; - info = IEEE80211_SKB_CB(skb); - vif = info->control.vif; - - if (!vif) { - max_power = sc->cur_chan->cur_txpower; - goto out; - } - - if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) { - max_power = min_t(u8, sc->cur_chan->cur_txpower, - 2 * vif->bss_conf.txpower); - goto out; - } - fi = get_frame_info(skb); + info = IEEE80211_SKB_CB(skb); if (!AR_SREV_9300_20_OR_LATER(ah)) { int txpower = fi->tx_power; @@ -1161,25 +1147,26 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, txpower -= 2; txpower = max(txpower, 0); - max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min_t(u8, max_power, txpower); + max_power = min_t(u8, ah->tx_power[rateidx], txpower); + + /* XXX: clamp minimum TX power at 1 for AR9160 since if + * max_power is set to 0, frames are transmitted at max + * TX power + */ + if (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) + max_power = 1; } else if (!bf->bf_state.bfs_paprd) { if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC)) max_power = min_t(u8, ah->tx_power_stbc[rateidx], - 2 * vif->bss_conf.txpower); + fi->tx_power); else max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min(max_power, fi->tx_power); + fi->tx_power); } else { max_power = ah->paprd_training_power; } -out: - /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power - * is set to 0, frames are transmitted at max TX power - */ - return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power; + + return max_power; } static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, @@ -2129,6 +2116,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct ath_node *an = NULL; enum ath9k_key_type keytype; bool short_preamble = false; + u8 txpower; /* * We check if Short Preamble is needed for the CTS rate by @@ -2145,6 +2133,16 @@ static void setup_frame_info(struct ieee80211_hw *hw, if (sta) an = (struct ath_node *) sta->drv_priv; + if (tx_info->control.vif) { + struct ieee80211_vif *vif = tx_info->control.vif; + + txpower = 2 * vif->bss_conf.txpower; + } else { + struct ath_softc *sc = hw->priv; + + txpower = sc->cur_chan->cur_txpower; + } + memset(fi, 0, sizeof(*fi)); fi->txq = -1; if (hw_key) @@ -2155,7 +2153,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; - fi->tx_power = MAX_RATE_POWER; + fi->tx_power = txpower; if (!rate) return; -- cgit v0.10.2 From 1424532b2163bf1580f4b1091a5801e12310fac5 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 29 Apr 2015 11:29:19 +0100 Subject: ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops Patch 22b3c181c6c324a46f71aae806d8ddbe61d25761 ("arm: dma-mapping: limit IOMMU mapping size") added a check for IO address space size. However this patch broke IOMMU initialization for typical platforms initialized from device tree, which get the default IO address space size of 4GiB. This value doesn't fit into size_t and fails a check introduced by that commit resulting in failed dma-mapping/iommu initialization. This patch fixes this issue by adding proper support for full 4GiB address space size. Signed-off-by: Marek Szyprowski Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 8e3fcb9..2ef282f 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -25,7 +25,7 @@ struct dma_iommu_mapping { }; struct dma_iommu_mapping * -arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size); +arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size); void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 09c5fe3..7e7583d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = { * arm_iommu_attach_device function. */ struct dma_iommu_mapping * -arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) +arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size) { unsigned int bits = size >> PAGE_SHIFT; unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long); @@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) int extensions = 1; int err = -ENOMEM; + /* currently only 32-bit DMA address space is supported */ + if (size > DMA_BIT_MASK(32) + 1) + return ERR_PTR(-ERANGE); + if (!bitmap_size) return ERR_PTR(-EINVAL); @@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, if (!iommu) return false; - /* - * currently arm_iommu_create_mapping() takes a max of size_t - * for size param. So check this limit for now. - */ - if (size > SIZE_MAX) - return false; - mapping = arm_iommu_create_mapping(dev->bus, dma_base, size); if (IS_ERR(mapping)) { pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n", -- cgit v0.10.2 From 024587dc2137a22096372fc8df4b283e84e057b5 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Thu, 30 Apr 2015 14:34:35 +0100 Subject: ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE CPU_ARM1020_CPU_IDLE is not defined in Kconfig. The last reference on LKML dates back to 2001, so we can safely remove the comments to make static analysis tools happy. Signed-off-by: Valentin Rothberg Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index aa0519e..774ef13 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -22,8 +22,6 @@ * * These are the low level assembler for performing cache and TLB * functions on the arm1020. - * - * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include #include diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index bff4c7f..ae3c27b 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -22,8 +22,6 @@ * * These are the low level assembler for performing cache and TLB * functions on the arm1020e. - * - * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include #include -- cgit v0.10.2 From 13f2fa7cb33d82b95e1e1dab8c95fa619b49f418 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Thu, 30 Apr 2015 14:36:03 +0100 Subject: ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block The block could never be compiled; CPU_ICACHE_STREAMING_DISABLE has not been defined in Kconfig since the very first Git commit. Hence, we can safely remove the entire block. Signed-off-by: Valentin Rothberg Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ede8c54..32a47cc 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext) .type __arm925_setup, #function __arm925_setup: mov r0, #0 -#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE) - orr r0,r0,#1 << 7 -#endif /* Transparent on, D-cache clean & flush mode. See NOTE2 above */ orr r0,r0,#1 << 1 @ transparent mode on -- cgit v0.10.2 From 59c3191628fd1ced948d099f3138b92b06281520 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 30 Apr 2015 19:51:43 +0100 Subject: ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") broke booting for Kirkwood. The kernel would say: Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported processor variant (0x56251311). Fix it by removing the extraneous .long __feroceon_setup from the feroceon_proc_info macro. Fixes: bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") Reported-by: Florian Fainelli Suggested-by: Arnd Bergmann Signed-off-by: Andrew Lunn Tested-by: Florian Fainelli Acked-by: Ard Biesheuvel Tested-by: Aaro Koskinen Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index e494d6d..92e08bf 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -602,7 +602,6 @@ __\name\()_proc_info: PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ initfn __feroceon_setup, __\name\()_proc_info - .long __feroceon_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP -- cgit v0.10.2 From 338d9dd3e2aee00a9198e8bf6e7d535d3feeaf32 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 17:15:23 +0100 Subject: ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs PPIs are affine by nature, so the interrupt-affinity property is not used and therefore we shouldn't print a warning in its absence. Reported-by: Maxime Ripard Reviewed-by: Maxime Ripard Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 91c7ba1..becf7ad 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu) static int of_pmu_irq_cfg(struct platform_device *pdev) { - int i; + int i, irq; int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); if (!irqs) return -ENOMEM; + /* Don't bother with PPIs; they're already affine */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0 && irq_is_percpu(irq)) + return 0; + for (i = 0; i < pdev->num_resources; ++i) { struct device_node *dn; int cpu; -- cgit v0.10.2 From 3b8786ff7a1b31645ae2c26a2ec32dbd42ac1094 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 May 2015 17:16:01 +0100 Subject: ARM: 8352/1: perf: Fix the pmu node name in warning message With commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property"), we print a warning when we find a PMU SPI with a missing missing interrupt-affinity property in a pmu node. Unfortunately, we pass the wrong (NULL) device node to of_node_full_name, resulting in unhelpful messages such as: hw perfevents: Failed to parse /interrupt-affinity[0] This patch fixes the name to that of the pmu node. Fixes: 9fd85eb502a7 (ARM: pmu: add support for interrupt-affinity property) Acked-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index becf7ad..213919b 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -322,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev) i); if (!dn) { pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", - of_node_full_name(dn), i); + of_node_full_name(pdev->dev.of_node), i); break; } -- cgit v0.10.2 From a5d28090405038ca1f40c13f38d6d4285456efee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 30 Apr 2015 09:40:40 -0700 Subject: codel: fix maxpacket/mtu confusion Under presence of TSO/GSO/GRO packets, codel at low rates can be quite useless. In following example, not a single packet was ever dropped, while average delay in codel queue is ~100 ms ! qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 134376498 bytes 88797 pkt (dropped 0, overlimits 0 requeues 0) backlog 13626b 3p requeues 0 count 0 lastcount 0 ldelay 96.9ms drop_next 0us maxpacket 9084 ecn_mark 0 drop_overlimit 0 This comes from a confusion of what should be the minimal backlog. It is pretty clear it is not 64KB or whatever max GSO packet ever reached the qdisc. codel intent was to use MTU of the device. After the fix, we finally drop some packets, and rtt/cwnd of my single TCP flow are meeting our expectations. qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 102798497 bytes 67912 pkt (dropped 1365, overlimits 0 requeues 0) backlog 6056b 3p requeues 0 count 1 lastcount 1 ldelay 36.3ms drop_next 0us maxpacket 10598 ecn_mark 0 drop_overlimit 0 Signed-off-by: Eric Dumazet Cc: Kathleen Nichols Cc: Dave Taht Cc: Van Jacobson Signed-off-by: David S. Miller diff --git a/include/net/codel.h b/include/net/codel.h index aeee280..1e18005 100644 --- a/include/net/codel.h +++ b/include/net/codel.h @@ -120,11 +120,13 @@ static inline u32 codel_time_to_us(codel_time_t val) * struct codel_params - contains codel parameters * @target: target queue size (in time units) * @interval: width of moving time window + * @mtu: device mtu, or minimal queue backlog in bytes. * @ecn: is Explicit Congestion Notification enabled */ struct codel_params { codel_time_t target; codel_time_t interval; + u32 mtu; bool ecn; }; @@ -166,10 +168,12 @@ struct codel_stats { u32 ecn_mark; }; -static void codel_params_init(struct codel_params *params) +static void codel_params_init(struct codel_params *params, + const struct Qdisc *sch) { params->interval = MS2TIME(100); params->target = MS2TIME(5); + params->mtu = psched_mtu(qdisc_dev(sch)); params->ecn = false; } @@ -180,7 +184,7 @@ static void codel_vars_init(struct codel_vars *vars) static void codel_stats_init(struct codel_stats *stats) { - stats->maxpacket = 256; + stats->maxpacket = 0; } /* @@ -234,7 +238,7 @@ static bool codel_should_drop(const struct sk_buff *skb, stats->maxpacket = qdisc_pkt_len(skb); if (codel_time_before(vars->ldelay, params->target) || - sch->qstats.backlog <= stats->maxpacket) { + sch->qstats.backlog <= params->mtu) { /* went below - stay below for at least interval */ vars->first_above_time = 0; return false; diff --git a/net/sched/sch_codel.c b/net/sched/sch_codel.c index de28f8e..7a0bdb1 100644 --- a/net/sched/sch_codel.c +++ b/net/sched/sch_codel.c @@ -164,7 +164,7 @@ static int codel_init(struct Qdisc *sch, struct nlattr *opt) sch->limit = DEFAULT_CODEL_LIMIT; - codel_params_init(&q->params); + codel_params_init(&q->params, sch); codel_vars_init(&q->vars); codel_stats_init(&q->stats); diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 1e52dec..c244c45b 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -391,7 +391,7 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt) q->perturbation = prandom_u32(); INIT_LIST_HEAD(&q->new_flows); INIT_LIST_HEAD(&q->old_flows); - codel_params_init(&q->cparams); + codel_params_init(&q->cparams, sch); codel_stats_init(&q->cstats); q->cparams.ecn = true; -- cgit v0.10.2 From 5ebe6afaf0057ac3eaeb98defd5456894b446d22 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 May 2015 19:22:23 -0700 Subject: Linux 4.1-rc2 diff --git a/Makefile b/Makefile index 7ff1239..2da553f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* -- cgit v0.10.2 From edac450d5b5d47aa11e614f19c8f9b17f362e608 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 1 May 2015 08:27:59 +0800 Subject: netlink: Remove max_size setting We currently limit the hash table size to 64K which is very bad as even 10 years ago it was relatively easy to generate millions of sockets. Since the hash table is naturally limited by memory allocation failure, we don't really need an explicit limit so this patch removes it. Signed-off-by: Herbert Xu Acked-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index ec4adbd..daa0b81 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -3139,7 +3139,6 @@ static const struct rhashtable_params netlink_rhashtable_params = { .key_len = netlink_compare_arg_len, .obj_hashfn = netlink_hash, .obj_cmpfn = netlink_compare, - .max_size = 65536, .automatic_shrinking = true, }; -- cgit v0.10.2 From c0adf54a10903b59037a4c5fcb933dfeeb7b2624 Mon Sep 17 00:00:00 2001 From: shamir rabinovitch Date: Thu, 30 Apr 2015 20:58:07 -0400 Subject: net/rds: fix unaligned memory access rdma_conn_param private data is copied using memcpy after headers such as cma_hdr (see cma_resolve_ib_udp as example). so the start of the private data is aligned to the end of the structure that come before. if this structure end with u32 the meaning is that the start of the private data will be 4 bytes aligned. structures that use u8/u16/u32/u64 are naturally aligned but in case the structure start is not 8 bytes aligned, all u64 members of this structure will not be aligned. to solve this issue we must use special macros that allow unaligned access to those unaligned members. Addresses the following kernel log seen when attempting to use RDMA: Kernel unaligned access at TPC[10507a88] rds_ib_cm_connect_complete+0x1bc/0x1e0 [rds_rdma] Acked-by: Chien Yen Signed-off-by: shamir rabinovitch [Minor tweaks for top of tree by:] Signed-off-by: David Ahern Signed-off-by: David S. Miller diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 31b74f5..29144a6 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -183,8 +183,17 @@ void rds_ib_cm_connect_complete(struct rds_connection *conn, struct rdma_cm_even /* If the peer gave us the last packet it saw, process this as if * we had received a regular ACK. */ - if (dp && dp->dp_ack_seq) - rds_send_drop_acked(conn, be64_to_cpu(dp->dp_ack_seq), NULL); + if (dp) { + /* dp structure start is not guaranteed to be 8 bytes aligned. + * Since dp_ack_seq is 64-bit extended load operations can be + * used so go through get_unaligned to avoid unaligned errors. + */ + u64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); + + if (dp_ack_seq) + rds_send_drop_acked(conn, be64_to_cpu(dp_ack_seq), + NULL); + } rds_connect_complete(conn); } -- cgit v0.10.2 From f0e9fc503a0d6c9d74ca5b6d1aaf87febbbd9b06 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 30 Apr 2015 21:47:42 -0400 Subject: drivers/net: include for modular stmmac_platform code This file is built off of a tristate Kconfig option and also contains modular function calls so it should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Giuseppe Cavallaro Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 705bbdf..68aec5c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -23,6 +23,7 @@ *******************************************************************************/ #include +#include #include #include #include -- cgit v0.10.2 From 4212b5433187d01b5ae83664b06e990a9116250f Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Fri, 1 May 2015 10:43:52 -0400 Subject: net: dsa: mv88e6xxx: unregister mv88e6352 driver Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: Vivien Didelot Reviewed-by: Guenter Roeck Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index af639ab..cf309aa9 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1469,6 +1469,9 @@ static void __exit mv88e6xxx_cleanup(void) #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) unregister_switch_driver(&mv88e6171_switch_driver); #endif +#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352) + unregister_switch_driver(&mv88e6352_switch_driver); +#endif #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) unregister_switch_driver(&mv88e6123_61_65_switch_driver); #endif -- cgit v0.10.2 From 59486329b46f31532ab032014fbaae72e9f190c3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:38 -0700 Subject: fm10k: Do not assume budget will never be 0 for NAPI The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index 1b0661e..c754b20 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -610,7 +610,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, unsigned int total_bytes = 0, total_packets = 0; u16 cleaned_count = fm10k_desc_unused(rx_ring); - do { + while (likely(total_packets < budget)) { union fm10k_rx_desc *rx_desc; /* return some buffers to hardware, one at a time is too slow */ @@ -659,7 +659,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, /* update budget accounting */ total_packets++; - } while (likely(total_packets < budget)); + } /* place incomplete frames back on ring for completion */ rx_ring->skb = skb; -- cgit v0.10.2 From eb781397904e5d6b90c80463eaa9dc592831bdae Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:44 -0700 Subject: r8169: Do not use dev_kfree_skb in xmit path The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c70ab40..3df51fa 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6884,7 +6884,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, rtl8169_start_xmit(nskb, tp->dev); } while (segs); - dev_kfree_skb(skb); + dev_consume_skb_any(skb); } else if (skb->ip_summed == CHECKSUM_PARTIAL) { if (skb_checksum_help(skb) < 0) goto drop; @@ -6896,7 +6896,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, drop: stats = &tp->dev->stats; stats->tx_dropped++; - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); } } -- cgit v0.10.2 From e7fcd5439ffd76e499b7ba4a2f8e99645addff3e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:50 -0700 Subject: ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skb With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index a16d267..e71cdde 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3612,7 +3612,7 @@ static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev) u8 *dst_mac = skb_header_pointer(skb, 0, 0, NULL); if (!dst_mac || is_link_local_ether_addr(dst_mac)) { - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v0.10.2 From 2e70aedd3d522b018c01df172cd213a8a75e2d55 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 3 May 2015 08:04:28 +0800 Subject: Revert "net: kernel socket should be released in init_net namespace" This reverts commit c243d7e20996254f89c28d4838b5feca735c030d. That patch is solving a non-existant problem while creating a real problem. Just because a socket is allocated in the init name space doesn't mean that it gets hashed in the init name space. When we unhash it the name space must be the same as the one we had when we hashed it. So this patch is completely bogus and causes socket leaks. Reported-by: Andrey Wagin Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/sock.c b/net/core/sock.c index e891bcf..292f422 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1474,8 +1474,8 @@ void sk_release_kernel(struct sock *sk) return; sock_hold(sk); - sock_net_set(sk, get_net(&init_net)); sock_release(sk->sk_socket); + sock_net_set(sk, get_net(&init_net)); sock_put(sk); } EXPORT_SYMBOL(sk_release_kernel); -- cgit v0.10.2 From efdbd2b30caa65dd9e687853afa4d7ce8b39447e Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 1 May 2015 17:36:37 -0400 Subject: macvlan: Propagate promiscuity setting to lower devices. When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index b227a13..9f59f17 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -599,10 +599,18 @@ static int macvlan_open(struct net_device *dev) goto del_unicast; } + if (dev->flags & IFF_PROMISC) { + err = dev_set_promiscuity(lowerdev, 1); + if (err < 0) + goto clear_multi; + } + hash_add: macvlan_hash_add(vlan); return 0; +clear_multi: + dev_set_allmulti(lowerdev, -1); del_unicast: dev_uc_del(lowerdev, dev->dev_addr); out: @@ -638,6 +646,9 @@ static int macvlan_stop(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) dev_set_allmulti(lowerdev, -1); + if (dev->flags & IFF_PROMISC) + dev_set_promiscuity(lowerdev, -1); + dev_uc_del(lowerdev, dev->dev_addr); hash_del: @@ -696,6 +707,10 @@ static void macvlan_change_rx_flags(struct net_device *dev, int change) if (dev->flags & IFF_UP) { if (change & IFF_ALLMULTI) dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); + if (change & IFF_PROMISC) + dev_set_promiscuity(lowerdev, + dev->flags & IFF_PROMISC ? 1 : -1); + } } -- cgit v0.10.2 From 184af16b09360d6273fd6160e6ff7f8e2482ef23 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 23 Apr 2015 13:43:43 +0300 Subject: mmc: core: add missing pm event in mmc_pm_notify to fix hib restore The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25fe0b8 (mmc: fix all hangs related to mmc/sd card...) Signed-off-by: Grygorii Strashko Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index c296bc0..92e7671 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2651,6 +2651,7 @@ int mmc_pm_notify(struct notifier_block *notify_block, switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: + case PM_RESTORE_PREPARE: spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 1; spin_unlock_irqrestore(&host->lock, flags); -- cgit v0.10.2 From 7829fb09a2b4268b30dd9bc782fa5ebee278b137 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 30 Apr 2015 04:13:52 +0200 Subject: lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller Tested-by: Stephan Mueller Signed-off-by: Daniel Borkmann Cc: Theodore Ts'o Cc: Stephan Mueller Cc: Hannes Frederic Sowa Cc: mancha security Cc: Mark Charlebois Cc: Behan Webster Signed-off-by: Herbert Xu diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index cdf13ca..371e560 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -9,10 +9,24 @@ + __GNUC_MINOR__ * 100 \ + __GNUC_PATCHLEVEL__) - /* Optimization barrier */ + /* The "volatile" is due to gcc bugs */ #define barrier() __asm__ __volatile__("": : :"memory") +/* + * This version is i.e. to prevent dead stores elimination on @ptr + * where gcc and llvm may behave differently when otherwise using + * normal barrier(): while gcc behavior gets along with a normal + * barrier(), llvm needs an explicit input variable to be assumed + * clobbered. The issue is as follows: while the inline asm might + * access any memory it wants, the compiler could have fit all of + * @ptr into memory registers instead, and since @ptr never escaped + * from that, it proofed that the inline asm wasn't touching any of + * it. This version works well with both compilers, i.e. we're telling + * the compiler that the inline asm absolutely may see the contents + * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 + */ +#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") /* * This macro obfuscates arithmetic on a variable address so that gcc diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index ba147a1..0c9a2f2 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -13,9 +13,12 @@ /* Intel ECC compiler doesn't support gcc specific asm stmts. * It uses intrinsics to do the equivalent things. */ +#undef barrier_data #undef RELOC_HIDE #undef OPTIMIZER_HIDE_VAR +#define barrier_data(ptr) barrier() + #define RELOC_HIDE(ptr, off) \ ({ unsigned long __ptr; \ __ptr = (unsigned long) (ptr); \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 0e41ca0..8677225 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -169,6 +169,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define barrier() __memory_barrier() #endif +#ifndef barrier_data +# define barrier_data(ptr) barrier() +#endif + /* Unreachable code */ #ifndef unreachable # define unreachable() do { } while (1) diff --git a/lib/string.c b/lib/string.c index a579201..bb3d4b6 100644 --- a/lib/string.c +++ b/lib/string.c @@ -607,7 +607,7 @@ EXPORT_SYMBOL(memset); void memzero_explicit(void *s, size_t count) { memset(s, 0, count); - barrier(); + barrier_data(s); } EXPORT_SYMBOL(memzero_explicit); -- cgit v0.10.2 From f440c4ee3e53f767974fe60bcbc0b6687a5fb53f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sat, 2 May 2015 12:08:42 +0200 Subject: hwrng: bcm63xx - Fix driver compilation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - s/clk_didsable_unprepare/clk_disable_unprepare - s/prov/priv - s/error/ret (bcm63xx_rng_probe) Fixes: 6229c16060fe ("hwrng: bcm63xx - make use of devm_hwrng_register") Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Signed-off-by: Herbert Xu diff --git a/drivers/char/hw_random/bcm63xx-rng.c b/drivers/char/hw_random/bcm63xx-rng.c index d1494ec..4b31f13 100644 --- a/drivers/char/hw_random/bcm63xx-rng.c +++ b/drivers/char/hw_random/bcm63xx-rng.c @@ -57,7 +57,7 @@ static void bcm63xx_rng_cleanup(struct hwrng *rng) val &= ~RNG_EN; __raw_writel(val, priv->regs + RNG_CTRL); - clk_didsable_unprepare(prov->clk); + clk_disable_unprepare(priv->clk); } static int bcm63xx_rng_data_present(struct hwrng *rng, int wait) @@ -97,14 +97,14 @@ static int bcm63xx_rng_probe(struct platform_device *pdev) priv->rng.name = pdev->name; priv->rng.init = bcm63xx_rng_init; priv->rng.cleanup = bcm63xx_rng_cleanup; - prov->rng.data_present = bcm63xx_rng_data_present; + priv->rng.data_present = bcm63xx_rng_data_present; priv->rng.data_read = bcm63xx_rng_data_read; priv->clk = devm_clk_get(&pdev->dev, "ipsec"); if (IS_ERR(priv->clk)) { - error = PTR_ERR(priv->clk); - dev_err(&pdev->dev, "no clock for device: %d\n", error); - return error; + ret = PTR_ERR(priv->clk); + dev_err(&pdev->dev, "no clock for device: %d\n", ret); + return ret; } if (!devm_request_mem_region(&pdev->dev, r->start, @@ -120,11 +120,11 @@ static int bcm63xx_rng_probe(struct platform_device *pdev) return -ENOMEM; } - error = devm_hwrng_register(&pdev->dev, &priv->rng); - if (error) { + ret = devm_hwrng_register(&pdev->dev, &priv->rng); + if (ret) { dev_err(&pdev->dev, "failed to register rng device: %d\n", - error); - return error; + ret); + return ret; } dev_info(&pdev->dev, "registered RNG driver\n"); -- cgit v0.10.2 From ff419b3f95ab7a97c5f72876b53f12a249dacc2a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 26 Apr 2015 20:13:34 -0700 Subject: mac80211: fix 90 kernel-doc warnings Eliminate 90 of these warnings: Warning(..//include/net/mac80211.h:1682): No description found for parameter 'drv_priv[0]' Signed-off-by: Randy Dunlap Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b4bef11..8e3668b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1666,6 +1666,8 @@ struct ieee80211_tx_control { * @sta: station table entry, %NULL for per-vif queue * @tid: the TID for this queue (unused for per-vif queue) * @ac: the AC for this queue + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *). * * The driver can obtain packets from this queue by calling * ieee80211_tx_dequeue(). -- cgit v0.10.2 From 1bf1b431d98d7e5b5419876d4c219469e60693e1 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 16 Apr 2015 17:08:44 +0300 Subject: iommu/amd: Fix bug in put_pasid_state_wait This patch fixes a bug in put_pasid_state_wait that appeared in kernel 4.0 The bug is that pasid_state->count wasn't decremented before entering the wait_event. Thus, the condition in wait_event will never be true. The fix is to decrement (atomically) the pasid_state->count before the wait_event. Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org #v4.0 Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c index a1cbba9..3465faf 100644 --- a/drivers/iommu/amd_iommu_v2.c +++ b/drivers/iommu/amd_iommu_v2.c @@ -266,6 +266,7 @@ static void put_pasid_state(struct pasid_state *pasid_state) static void put_pasid_state_wait(struct pasid_state *pasid_state) { + atomic_dec(&pasid_state->count); wait_event(pasid_state->wq, !atomic_read(&pasid_state->count)); free_pasid_state(pasid_state); } -- cgit v0.10.2 From a00212e21928640486d3cc939cf4d908e8522016 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 4 May 2015 01:58:27 +0200 Subject: ACPI / documentation: Fix ambiguity in the GPIO properties document The first paragraph in Documentation/acpi/gpio-properties.txt is ambiguous, so make it more clear. Reported-by: Antonio Ospite Acked-by: Antonio Ospite Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt index ae36fcf..f35dad1 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/acpi/gpio-properties.txt @@ -1,9 +1,9 @@ _DSD Device Properties Related to GPIO -------------------------------------- -With the release of ACPI 5.1 and the _DSD configuration objecte names -can finally be given to GPIOs (and other things as well) returned by -_CRS. Previously, we were only able to use an integer index to find +With the release of ACPI 5.1, the _DSD configuration object finally +allows names to be given to GPIOs (and other things as well) returned +by _CRS. Previously, we were only able to use an integer index to find the corresponding GPIO, which is pretty error prone (it depends on the _CRS output ordering, for example). -- cgit v0.10.2 From 74d77e50f23123938fbb7987eba71310864e6a7c Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Apr 2015 10:59:17 -0500 Subject: pinctrl: mediatek: mtk-common: initialize unmask cppcheck detected an uninitialized variable: [drivers/pinctrl/mediatek/pinctrl-mtk-common.c:897]: (error) Uninitialized variable: unmask unmask should be initialized to zero to ensure unmasking only occurs if a previous mask occurred. The current situation is that the unmask variable could contain any random garbage causing random unexpected unmasking. Signed-off-by: Colin Ian King Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index 493294c..474812e 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -881,6 +881,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, if (!mtk_eint_get_mask(pctl, eint_num)) { mtk_eint_mask(d); unmask = 1; + } else { + unmask = 0; } clr_bit = 0xff << eint_offset; -- cgit v0.10.2 From 622532bb2fad8fe342fb685727ae0be566f6be5d Mon Sep 17 00:00:00 2001 From: Witold Szczeponik Date: Fri, 1 May 2015 19:05:20 +0200 Subject: ACPI / PNP: add two IDs to list for PNPACPI device enumeration Commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) changed the way how ACPI devices are enumerated and when they are added to the PNP bus. However, it broke the sound card support on (at least) a vintage IBM ThinkPad 600E: with said commit applied, two of the necessary "CSC01xx" devices are not added to the PNP bus and hence can not be found during the initialization of the "snd-cs4236" module. As a consequence, loading "snd-cs4236" causes null pointer exceptions. The attached patch fixes the problem end re-enables sound on the IBM ThinkPad 600E. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Witold Szczeponik Cc: 3.16+ # 3.16+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index b193f84..ff6d8ad 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -304,6 +304,8 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = { {"PNPb006"}, /* cs423x-pnpbios */ {"CSC0100"}, + {"CSC0103"}, + {"CSC0110"}, {"CSC0000"}, {"GIM0100"}, /* Guillemot Turtlebeach something appears to be cs4232 compatible */ /* es18xx-pnpbios */ -- cgit v0.10.2 From 102bcb6ed2d1c3ffcc7269afc957c2df11942085 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 4 May 2015 08:54:41 -0700 Subject: ARM: OMAP2+: Fix omap off idle power consumption creeping up If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon . Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb7630 ("ARM: OMAP3: Fix idle mode signaling for Cc: stable@vger.kernel.org # v3.16+ sys_clkreq and sys_off_mode") Cc: Kevin Hilman Cc: Tero Kristo Reviewed-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index cbefbd7..661d753 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -112,6 +112,7 @@ #define OMAP3430_VC_CMD_ONLP_SHIFT 16 #define OMAP3430_VC_CMD_RET_SHIFT 8 #define OMAP3430_VC_CMD_OFF_SHIFT 0 +#define OMAP3430_SREN_MASK (1 << 4) #define OMAP3430_HSEN_MASK (1 << 3) #define OMAP3430_MCODE_MASK (0x7 << 0) #define OMAP3430_VALID_MASK (1 << 24) diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h index b1c7a33..e794828 100644 --- a/arch/arm/mach-omap2/prm-regbits-44xx.h +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -35,6 +35,7 @@ #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1 #define OMAP4430_GLOBAL_WUEN_MASK (1 << 16) #define OMAP4430_HSMCODE_MASK (0x7 << 0) +#define OMAP4430_SRMODEEN_MASK (1 << 4) #define OMAP4430_HSMODEEN_MASK (1 << 3) #define OMAP4430_HSSCLL_SHIFT 24 #define OMAP4430_ICEPICK_RST_SHIFT 9 diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index be9ef83..076fd20 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) * idle. And we can also scale voltages to zero for off-idle. * Note that no actual voltage scaling during off-idle will * happen unless the board specific twl4030 PMIC scripts are - * loaded. + * loaded. See also omap_vc_i2c_init for comments regarding + * erratum i531. */ val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) { @@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) return; } + /* + * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around + * erratum i531 "Extra Power Consumed When Repeated Start Operation + * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)". + * Otherwise I2C4 eventually leads into about 23mW extra power being + * consumed even during off idle using VMODE. + */ i2c_high_speed = voltdm->pmic->i2c_high_speed; if (i2c_high_speed) - voltdm->rmw(vc->common->i2c_cfg_hsen_mask, + voltdm->rmw(vc->common->i2c_cfg_clear_mask, vc->common->i2c_cfg_hsen_mask, vc->common->i2c_cfg_reg); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index cdbdd78..89b83b7 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -34,6 +34,7 @@ struct voltagedomain; * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register * @i2c_cfg_reg: I2C configuration register offset + * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register * @i2c_mcode_mask: MCODE field mask for I2C config register * @@ -52,6 +53,7 @@ struct omap_vc_common { u8 cmd_ret_shift; u8 cmd_off_shift; u8 i2c_cfg_reg; + u8 i2c_cfg_clear_mask; u8 i2c_cfg_hsen_mask; u8 i2c_mcode_mask; }; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 75bc4aa..71d74c9 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, + .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK, .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, .i2c_mcode_mask = OMAP3430_MCODE_MASK, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 085e5d6..2abd5fa 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = { .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, + .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK, .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, }; -- cgit v0.10.2 From 40cdc7a530c7a075557651a071354bb42b99df08 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 27 Apr 2015 14:50:13 +0200 Subject: nfsd/blocklayout: pretend we can send deviceid notifications Commit df52699e4fcef ("NFSv4.1: Don't cache deviceids that have no notifications") causes the Linux NFS client to stop caching deviceid's unless a server pretends to support deviceid notifications. While this behavior is stupid and the language around this area in rfc5661 is a mess carified by an errata that I submittted, Trond insists on this behavior. Not caching deviceids degrades block layout performance massively as a GETDEVICEINFO is fairly expensive. So add this hack to make the Linux client happy again. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 03d647b..cdefaa3 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -181,6 +181,17 @@ nfsd4_block_proc_layoutcommit(struct inode *inode, } const struct nfsd4_layout_ops bl_layout_ops = { + /* + * Pretend that we send notification to the client. This is a blatant + * lie to force recent Linux clients to cache our device IDs. + * We rarely ever change the device ID, so the harm of leaking deviceids + * for a while isn't too bad. Unfortunately RFC5661 is a complete mess + * in this regard, but I filed errata 4119 for this a while ago, and + * hopefully the Linux client will eventually start caching deviceids + * without this again. + */ + .notify_types = + NOTIFY_DEVICEID4_DELETE | NOTIFY_DEVICEID4_CHANGE, .proc_getdeviceinfo = nfsd4_block_proc_getdeviceinfo, .encode_getdeviceinfo = nfsd4_block_encode_getdeviceinfo, .proc_layoutget = nfsd4_block_proc_layoutget, -- cgit v0.10.2 From ebe9cb3bb13e7b9b281969cd279ce70834f7500f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 28 Apr 2015 15:41:15 +0200 Subject: nfsd: fix the check for confirmed openowner in nfs4_preprocess_stateid_op If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 38f2d7a..fb8c667 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -4385,10 +4385,17 @@ static __be32 check_stateid_generation(stateid_t *in, stateid_t *ref, bool has_s return nfserr_old_stateid; } +static __be32 nfsd4_check_openowner_confirmed(struct nfs4_ol_stateid *ols) +{ + if (ols->st_stateowner->so_is_open_owner && + !(openowner(ols->st_stateowner)->oo_flags & NFS4_OO_CONFIRMED)) + return nfserr_bad_stateid; + return nfs_ok; +} + static __be32 nfsd4_validate_stateid(struct nfs4_client *cl, stateid_t *stateid) { struct nfs4_stid *s; - struct nfs4_ol_stateid *ols; __be32 status = nfserr_bad_stateid; if (ZERO_STATEID(stateid) || ONE_STATEID(stateid)) @@ -4418,13 +4425,7 @@ static __be32 nfsd4_validate_stateid(struct nfs4_client *cl, stateid_t *stateid) break; case NFS4_OPEN_STID: case NFS4_LOCK_STID: - ols = openlockstateid(s); - if (ols->st_stateowner->so_is_open_owner - && !(openowner(ols->st_stateowner)->oo_flags - & NFS4_OO_CONFIRMED)) - status = nfserr_bad_stateid; - else - status = nfs_ok; + status = nfsd4_check_openowner_confirmed(openlockstateid(s)); break; default: printk("unknown stateid type %x\n", s->sc_type); @@ -4516,8 +4517,8 @@ nfs4_preprocess_stateid_op(struct net *net, struct nfsd4_compound_state *cstate, status = nfs4_check_fh(current_fh, stp); if (status) goto out; - if (stp->st_stateowner->so_is_open_owner - && !(openowner(stp->st_stateowner)->oo_flags & NFS4_OO_CONFIRMED)) + status = nfsd4_check_openowner_confirmed(stp); + if (status) goto out; status = nfs4_check_openmode(stp, flags); if (status) -- cgit v0.10.2 From 8287f009bd95a5e548059dba62a67727bb9549cd Mon Sep 17 00:00:00 2001 From: Sachin Bhamare Date: Mon, 27 Apr 2015 14:50:14 +0200 Subject: nfsd: fix pNFS return on close semantics For the sake of forgetful clients, the server should return the layouts to the file system on 'last close' of a file (assuming that there are no delegations outstanding to that particular client) or on delegreturn (assuming that there are no opens on a file from that particular client). In theory the information is all there in current data structures, but it's not efficiently available; nfs4_file->fi_ref includes references on the file across all clients, but we need a per-(client, file) count. Walking through lots of stateid's to calculate this on each close or delegreturn would be painful. This patch introduces infrastructure to maintain per-client opens and delegation counters on a per-file basis. [hch: ported to the mainline pNFS support, merged various fixes from Jeff] Signed-off-by: Sachin Bhamare Signed-off-by: Jeff Layton Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index fb8c667..66067a2 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -94,6 +94,7 @@ static struct kmem_cache *lockowner_slab; static struct kmem_cache *file_slab; static struct kmem_cache *stateid_slab; static struct kmem_cache *deleg_slab; +static struct kmem_cache *odstate_slab; static void free_session(struct nfsd4_session *); @@ -281,6 +282,7 @@ put_nfs4_file(struct nfs4_file *fi) if (atomic_dec_and_lock(&fi->fi_ref, &state_lock)) { hlist_del_rcu(&fi->fi_hash); spin_unlock(&state_lock); + WARN_ON_ONCE(!list_empty(&fi->fi_clnt_odstate)); WARN_ON_ONCE(!list_empty(&fi->fi_delegations)); call_rcu(&fi->fi_rcu, nfsd4_free_file_rcu); } @@ -471,6 +473,86 @@ static void nfs4_file_put_access(struct nfs4_file *fp, u32 access) __nfs4_file_put_access(fp, O_RDONLY); } +/* + * Allocate a new open/delegation state counter. This is needed for + * pNFS for proper return on close semantics. + * + * Note that we only allocate it for pNFS-enabled exports, otherwise + * all pointers to struct nfs4_clnt_odstate are always NULL. + */ +static struct nfs4_clnt_odstate * +alloc_clnt_odstate(struct nfs4_client *clp) +{ + struct nfs4_clnt_odstate *co; + + co = kmem_cache_zalloc(odstate_slab, GFP_KERNEL); + if (co) { + co->co_client = clp; + atomic_set(&co->co_odcount, 1); + } + return co; +} + +static void +hash_clnt_odstate_locked(struct nfs4_clnt_odstate *co) +{ + struct nfs4_file *fp = co->co_file; + + lockdep_assert_held(&fp->fi_lock); + list_add(&co->co_perfile, &fp->fi_clnt_odstate); +} + +static inline void +get_clnt_odstate(struct nfs4_clnt_odstate *co) +{ + if (co) + atomic_inc(&co->co_odcount); +} + +static void +put_clnt_odstate(struct nfs4_clnt_odstate *co) +{ + struct nfs4_file *fp; + + if (!co) + return; + + fp = co->co_file; + if (atomic_dec_and_lock(&co->co_odcount, &fp->fi_lock)) { + list_del(&co->co_perfile); + spin_unlock(&fp->fi_lock); + + nfsd4_return_all_file_layouts(co->co_client, fp); + kmem_cache_free(odstate_slab, co); + } +} + +static struct nfs4_clnt_odstate * +find_or_hash_clnt_odstate(struct nfs4_file *fp, struct nfs4_clnt_odstate *new) +{ + struct nfs4_clnt_odstate *co; + struct nfs4_client *cl; + + if (!new) + return NULL; + + cl = new->co_client; + + spin_lock(&fp->fi_lock); + list_for_each_entry(co, &fp->fi_clnt_odstate, co_perfile) { + if (co->co_client == cl) { + get_clnt_odstate(co); + goto out; + } + } + co = new; + co->co_file = fp; + hash_clnt_odstate_locked(new); +out: + spin_unlock(&fp->fi_lock); + return co; +} + struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct kmem_cache *slab) { @@ -606,7 +688,8 @@ static void block_delegations(struct knfsd_fh *fh) } static struct nfs4_delegation * -alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh) +alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh, + struct nfs4_clnt_odstate *odstate) { struct nfs4_delegation *dp; long n; @@ -631,6 +714,8 @@ alloc_init_deleg(struct nfs4_client *clp, struct svc_fh *current_fh) INIT_LIST_HEAD(&dp->dl_perfile); INIT_LIST_HEAD(&dp->dl_perclnt); INIT_LIST_HEAD(&dp->dl_recall_lru); + dp->dl_clnt_odstate = odstate; + get_clnt_odstate(odstate); dp->dl_type = NFS4_OPEN_DELEGATE_READ; dp->dl_retries = 1; nfsd4_init_cb(&dp->dl_recall, dp->dl_stid.sc_client, @@ -714,6 +799,7 @@ static void destroy_delegation(struct nfs4_delegation *dp) spin_lock(&state_lock); unhash_delegation_locked(dp); spin_unlock(&state_lock); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } @@ -724,6 +810,7 @@ static void revoke_delegation(struct nfs4_delegation *dp) WARN_ON(!list_empty(&dp->dl_recall_lru)); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); if (clp->cl_minorversion == 0) @@ -933,6 +1020,7 @@ static void nfs4_free_ol_stateid(struct nfs4_stid *stid) { struct nfs4_ol_stateid *stp = openlockstateid(stid); + put_clnt_odstate(stp->st_clnt_odstate); release_all_access(stp); if (stp->st_stateowner) nfs4_put_stateowner(stp->st_stateowner); @@ -1634,6 +1722,7 @@ __destroy_client(struct nfs4_client *clp) while (!list_empty(&reaplist)) { dp = list_entry(reaplist.next, struct nfs4_delegation, dl_recall_lru); list_del_init(&dp->dl_recall_lru); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } @@ -3057,6 +3146,7 @@ static void nfsd4_init_file(struct knfsd_fh *fh, unsigned int hashval, spin_lock_init(&fp->fi_lock); INIT_LIST_HEAD(&fp->fi_stateids); INIT_LIST_HEAD(&fp->fi_delegations); + INIT_LIST_HEAD(&fp->fi_clnt_odstate); fh_copy_shallow(&fp->fi_fhandle, fh); fp->fi_deleg_file = NULL; fp->fi_had_conflict = false; @@ -3073,6 +3163,7 @@ static void nfsd4_init_file(struct knfsd_fh *fh, unsigned int hashval, void nfsd4_free_slabs(void) { + kmem_cache_destroy(odstate_slab); kmem_cache_destroy(openowner_slab); kmem_cache_destroy(lockowner_slab); kmem_cache_destroy(file_slab); @@ -3103,8 +3194,14 @@ nfsd4_init_slabs(void) sizeof(struct nfs4_delegation), 0, 0, NULL); if (deleg_slab == NULL) goto out_free_stateid_slab; + odstate_slab = kmem_cache_create("nfsd4_odstate", + sizeof(struct nfs4_clnt_odstate), 0, 0, NULL); + if (odstate_slab == NULL) + goto out_free_deleg_slab; return 0; +out_free_deleg_slab: + kmem_cache_destroy(deleg_slab); out_free_stateid_slab: kmem_cache_destroy(stateid_slab); out_free_file_slab: @@ -3581,6 +3678,14 @@ alloc_stateid: open->op_stp = nfs4_alloc_open_stateid(clp); if (!open->op_stp) return nfserr_jukebox; + + if (nfsd4_has_session(cstate) && + (cstate->current_fh.fh_export->ex_flags & NFSEXP_PNFS)) { + open->op_odstate = alloc_clnt_odstate(clp); + if (!open->op_odstate) + return nfserr_jukebox; + } + return nfs_ok; } @@ -3869,7 +3974,7 @@ out_fput: static struct nfs4_delegation * nfs4_set_delegation(struct nfs4_client *clp, struct svc_fh *fh, - struct nfs4_file *fp) + struct nfs4_file *fp, struct nfs4_clnt_odstate *odstate) { int status; struct nfs4_delegation *dp; @@ -3877,7 +3982,7 @@ nfs4_set_delegation(struct nfs4_client *clp, struct svc_fh *fh, if (fp->fi_had_conflict) return ERR_PTR(-EAGAIN); - dp = alloc_init_deleg(clp, fh); + dp = alloc_init_deleg(clp, fh, odstate); if (!dp) return ERR_PTR(-ENOMEM); @@ -3903,6 +4008,7 @@ out_unlock: spin_unlock(&state_lock); out: if (status) { + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_stid(&dp->dl_stid); return ERR_PTR(status); } @@ -3980,7 +4086,7 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, default: goto out_no_deleg; } - dp = nfs4_set_delegation(clp, fh, stp->st_stid.sc_file); + dp = nfs4_set_delegation(clp, fh, stp->st_stid.sc_file, stp->st_clnt_odstate); if (IS_ERR(dp)) goto out_no_deleg; @@ -4069,6 +4175,11 @@ nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nf release_open_stateid(stp); goto out; } + + stp->st_clnt_odstate = find_or_hash_clnt_odstate(fp, + open->op_odstate); + if (stp->st_clnt_odstate == open->op_odstate) + open->op_odstate = NULL; } update_stateid(&stp->st_stid.sc_stateid); memcpy(&open->op_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t)); @@ -4129,6 +4240,8 @@ void nfsd4_cleanup_open_state(struct nfsd4_compound_state *cstate, kmem_cache_free(file_slab, open->op_file); if (open->op_stp) nfs4_put_stid(&open->op_stp->st_stid); + if (open->op_odstate) + kmem_cache_free(odstate_slab, open->op_odstate); } __be32 @@ -4853,9 +4966,6 @@ nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, update_stateid(&stp->st_stid.sc_stateid); memcpy(&close->cl_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t)); - nfsd4_return_all_file_layouts(stp->st_stateowner->so_client, - stp->st_stid.sc_file); - nfsd4_close_open_stateid(stp); /* put reference from nfs4_preprocess_seqid_op */ @@ -6489,6 +6599,7 @@ nfs4_state_shutdown_net(struct net *net) list_for_each_safe(pos, next, &reaplist) { dp = list_entry (pos, struct nfs4_delegation, dl_recall_lru); list_del_init(&dp->dl_recall_lru); + put_clnt_odstate(dp->dl_clnt_odstate); nfs4_put_deleg_lease(dp->dl_stid.sc_file); nfs4_put_stid(&dp->dl_stid); } diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index 4f3bfeb..bde45d9 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -126,6 +126,7 @@ struct nfs4_delegation { struct list_head dl_perfile; struct list_head dl_perclnt; struct list_head dl_recall_lru; /* delegation recalled */ + struct nfs4_clnt_odstate *dl_clnt_odstate; u32 dl_type; time_t dl_time; /* For recall: */ @@ -465,6 +466,17 @@ static inline struct nfs4_lockowner * lockowner(struct nfs4_stateowner *so) } /* + * Per-client state indicating no. of opens and outstanding delegations + * on a file from a particular client.'od' stands for 'open & delegation' + */ +struct nfs4_clnt_odstate { + struct nfs4_client *co_client; + struct nfs4_file *co_file; + struct list_head co_perfile; + atomic_t co_odcount; +}; + +/* * nfs4_file: a file opened by some number of (open) nfs4_stateowners. * * These objects are global. nfsd keeps one instance of a nfs4_file per @@ -485,6 +497,7 @@ struct nfs4_file { struct list_head fi_delegations; struct rcu_head fi_rcu; }; + struct list_head fi_clnt_odstate; /* One each for O_RDONLY, O_WRONLY, O_RDWR: */ struct file * fi_fds[3]; /* @@ -526,6 +539,7 @@ struct nfs4_ol_stateid { struct list_head st_perstateowner; struct list_head st_locks; struct nfs4_stateowner * st_stateowner; + struct nfs4_clnt_odstate * st_clnt_odstate; unsigned char st_access_bmap; unsigned char st_deny_bmap; struct nfs4_ol_stateid * st_openstp; diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h index f982ae8..2f8c092 100644 --- a/fs/nfsd/xdr4.h +++ b/fs/nfsd/xdr4.h @@ -247,6 +247,7 @@ struct nfsd4_open { struct nfs4_openowner *op_openowner; /* used during processing */ struct nfs4_file *op_file; /* used during processing */ struct nfs4_ol_stateid *op_stp; /* used during processing */ + struct nfs4_clnt_odstate *op_odstate; /* used during processing */ struct nfs4_acl *op_acl; struct xdr_netobj op_label; }; -- cgit v0.10.2 From 9507271d960a1911a51683888837d75c171cd91f Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Tue, 28 Apr 2015 16:29:53 -0400 Subject: svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by: Scott Mayhew Cc: stable@vger.kernel.org Reviewed-by: Simo Sorce Signed-off-by: J. Bruce Fields diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c index 1ec19f6..eeeba5a 100644 --- a/net/sunrpc/auth_gss/gss_rpc_xdr.c +++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c @@ -793,20 +793,26 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, { u32 value_follows; int err; + struct page *scratch; + + scratch = alloc_page(GFP_KERNEL); + if (!scratch) + return -ENOMEM; + xdr_set_scratch_buffer(xdr, page_address(scratch), PAGE_SIZE); /* res->status */ err = gssx_dec_status(xdr, &res->status); if (err) - return err; + goto out_free; /* res->context_handle */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { err = gssx_dec_ctx(xdr, res->context_handle); if (err) - return err; + goto out_free; } else { res->context_handle = NULL; } @@ -814,11 +820,11 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, /* res->output_token */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { err = gssx_dec_buffer(xdr, res->output_token); if (err) - return err; + goto out_free; } else { res->output_token = NULL; } @@ -826,14 +832,17 @@ int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp, /* res->delegated_cred_handle */ err = gssx_dec_bool(xdr, &value_follows); if (err) - return err; + goto out_free; if (value_follows) { /* we do not support upcall servers sending this data. */ - return -EINVAL; + err = -EINVAL; + goto out_free; } /* res->options */ err = gssx_dec_option_array(xdr, &res->options); +out_free: + __free_page(scratch); return err; } -- cgit v0.10.2 From ef2a1b3e1067195f1d6b89d8329454775c87f033 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:23 +0200 Subject: nfsd: split transport vs operation errors for callbacks We must only increment the sequence id if the client has seen and responded to a request. If we failed to deliver it to the client we must resend with the same sequence id. So just like the client track errors at the transport level differently from those returned in the XDR. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index 5827785..cd58b7c 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -224,7 +224,7 @@ static int nfs_cb_stat_to_errno(int status) } static int decode_cb_op_status(struct xdr_stream *xdr, enum nfs_opnum4 expected, - enum nfsstat4 *status) + int *status) { __be32 *p; u32 op; @@ -235,7 +235,7 @@ static int decode_cb_op_status(struct xdr_stream *xdr, enum nfs_opnum4 expected, op = be32_to_cpup(p++); if (unlikely(op != expected)) goto out_unexpected; - *status = be32_to_cpup(p); + *status = nfs_cb_stat_to_errno(be32_to_cpup(p)); return 0; out_overflow: print_overflow_msg(__func__, xdr); @@ -446,22 +446,16 @@ out_overflow: static int decode_cb_sequence4res(struct xdr_stream *xdr, struct nfsd4_callback *cb) { - enum nfsstat4 nfserr; int status; if (cb->cb_minorversion == 0) return 0; - status = decode_cb_op_status(xdr, OP_CB_SEQUENCE, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - goto out_default; - status = decode_cb_sequence4resok(xdr, cb); -out: - return status; -out_default: - return nfs_cb_stat_to_errno(nfserr); + status = decode_cb_op_status(xdr, OP_CB_SEQUENCE, &cb->cb_status); + if (unlikely(status || cb->cb_status)) + return status; + + return decode_cb_sequence4resok(xdr, cb); } /* @@ -524,26 +518,19 @@ static int nfs4_xdr_dec_cb_recall(struct rpc_rqst *rqstp, struct nfsd4_callback *cb) { struct nfs4_cb_compound_hdr hdr; - enum nfsstat4 nfserr; int status; status = decode_cb_compound4res(xdr, &hdr); if (unlikely(status)) - goto out; + return status; if (cb != NULL) { status = decode_cb_sequence4res(xdr, cb); - if (unlikely(status)) - goto out; + if (unlikely(status || cb->cb_status)) + return status; } - status = decode_cb_op_status(xdr, OP_CB_RECALL, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - status = nfs_cb_stat_to_errno(nfserr); -out: - return status; + return decode_cb_op_status(xdr, OP_CB_RECALL, &cb->cb_status); } #ifdef CONFIG_NFSD_PNFS @@ -621,24 +608,18 @@ static int nfs4_xdr_dec_cb_layout(struct rpc_rqst *rqstp, struct nfsd4_callback *cb) { struct nfs4_cb_compound_hdr hdr; - enum nfsstat4 nfserr; int status; status = decode_cb_compound4res(xdr, &hdr); if (unlikely(status)) - goto out; + return status; + if (cb) { status = decode_cb_sequence4res(xdr, cb); - if (unlikely(status)) - goto out; + if (unlikely(status || cb->cb_status)) + return status; } - status = decode_cb_op_status(xdr, OP_CB_LAYOUTRECALL, &nfserr); - if (unlikely(status)) - goto out; - if (unlikely(nfserr != NFS4_OK)) - status = nfs_cb_stat_to_errno(nfserr); -out: - return status; + return decode_cb_op_status(xdr, OP_CB_LAYOUTRECALL, &cb->cb_status); } #endif /* CONFIG_NFSD_PNFS */ @@ -918,7 +899,8 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) if (clp->cl_minorversion) { /* No need for lock, access serialized in nfsd4_cb_prepare */ - ++clp->cl_cb_session->se_cb_seq_nr; + if (!task->tk_status) + ++clp->cl_cb_session->se_cb_seq_nr; clear_bit(0, &clp->cl_cb_slot_busy); rpc_wake_up_next(&clp->cl_cb_waitq); dprintk("%s: freed slot, new seqid=%d\n", __func__, @@ -935,6 +917,11 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) if (cb->cb_done) return; + if (cb->cb_status) { + WARN_ON_ONCE(task->tk_status); + task->tk_status = cb->cb_status; + } + switch (cb->cb_ops->done(cb, task)) { case 0: task->tk_status = 0; @@ -1099,6 +1086,7 @@ void nfsd4_init_cb(struct nfsd4_callback *cb, struct nfs4_client *clp, cb->cb_ops = ops; INIT_WORK(&cb->cb_work, nfsd4_run_cb_work); INIT_LIST_HEAD(&cb->cb_per_client); + cb->cb_status = 0; cb->cb_done = true; } diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index bde45d9..e791985 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -68,6 +68,7 @@ struct nfsd4_callback { struct rpc_message cb_msg; struct nfsd4_callback_ops *cb_ops; struct work_struct cb_work; + int cb_status; bool cb_done; }; -- cgit v0.10.2 From cba5f62b1830c1919b47544789bc993e6e617dc6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:24 +0200 Subject: nfsd: fix callback restarts Checking the rpc_client pointer is not a reliable way to detect backchannel changes: cl_cb_client is changed only after shutting down the rpc client, so the condition cl_cb_client = tk_client will always be true. Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid the buggy cl_callbacks list and fix the lifetime rules due to double calls of the ->prepare callback operations method for this retry case. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index cd58b7c..4c993aa 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -879,13 +879,6 @@ static void nfsd4_cb_prepare(struct rpc_task *task, void *calldata) if (!nfsd41_cb_get_slot(clp, task)) return; } - spin_lock(&clp->cl_lock); - if (list_empty(&cb->cb_per_client)) { - /* This is the first call, not a restart */ - cb->cb_done = false; - list_add(&cb->cb_per_client, &clp->cl_callbacks); - } - spin_unlock(&clp->cl_lock); rpc_call_start(task); } @@ -907,16 +900,21 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) clp->cl_cb_session->se_cb_seq_nr); } - if (clp->cl_cb_client != task->tk_client) { - /* We're shutting down or changing cl_cb_client; leave - * it to nfsd4_process_cb_update to restart the call if - * necessary. */ + /* + * If the backchannel connection was shut down while this + * task was queued, we need to resubmit it after setting up + * a new backchannel connection. + * + * Note that if we lost our callback connection permanently + * the submission code will error out, so we don't need to + * handle that case here. + */ + if (task->tk_flags & RPC_TASK_KILLED) { + task->tk_status = 0; + cb->cb_need_restart = true; return; } - if (cb->cb_done) - return; - if (cb->cb_status) { WARN_ON_ONCE(task->tk_status); task->tk_status = cb->cb_status; @@ -936,21 +934,17 @@ static void nfsd4_cb_done(struct rpc_task *task, void *calldata) default: BUG(); } - cb->cb_done = true; } static void nfsd4_cb_release(void *calldata) { struct nfsd4_callback *cb = calldata; - struct nfs4_client *clp = cb->cb_clp; - - if (cb->cb_done) { - spin_lock(&clp->cl_lock); - list_del(&cb->cb_per_client); - spin_unlock(&clp->cl_lock); + if (cb->cb_need_restart) + nfsd4_run_cb(cb); + else cb->cb_ops->release(cb); - } + } static const struct rpc_call_ops nfsd4_cb_ops = { @@ -1045,9 +1039,6 @@ static void nfsd4_process_cb_update(struct nfsd4_callback *cb) nfsd4_mark_cb_down(clp, err); return; } - /* Yay, the callback channel's back! Restart any callbacks: */ - list_for_each_entry(cb, &clp->cl_callbacks, cb_per_client) - queue_work(callback_wq, &cb->cb_work); } static void @@ -1058,8 +1049,12 @@ nfsd4_run_cb_work(struct work_struct *work) struct nfs4_client *clp = cb->cb_clp; struct rpc_clnt *clnt; - if (cb->cb_ops && cb->cb_ops->prepare) - cb->cb_ops->prepare(cb); + if (cb->cb_need_restart) { + cb->cb_need_restart = false; + } else { + if (cb->cb_ops && cb->cb_ops->prepare) + cb->cb_ops->prepare(cb); + } if (clp->cl_flags & NFSD4_CLIENT_CB_FLAG_MASK) nfsd4_process_cb_update(cb); @@ -1085,9 +1080,8 @@ void nfsd4_init_cb(struct nfsd4_callback *cb, struct nfs4_client *clp, cb->cb_msg.rpc_resp = cb; cb->cb_ops = ops; INIT_WORK(&cb->cb_work, nfsd4_run_cb_work); - INIT_LIST_HEAD(&cb->cb_per_client); cb->cb_status = 0; - cb->cb_done = true; + cb->cb_need_restart = false; } void nfsd4_run_cb(struct nfsd4_callback *cb) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 66067a2..039f9c8a 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1626,7 +1626,6 @@ static struct nfs4_client *alloc_client(struct xdr_netobj name) INIT_LIST_HEAD(&clp->cl_openowners); INIT_LIST_HEAD(&clp->cl_delegations); INIT_LIST_HEAD(&clp->cl_lru); - INIT_LIST_HEAD(&clp->cl_callbacks); INIT_LIST_HEAD(&clp->cl_revoked); #ifdef CONFIG_NFSD_PNFS INIT_LIST_HEAD(&clp->cl_lo_states); diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index e791985..dbc4f85 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -63,13 +63,12 @@ typedef struct { struct nfsd4_callback { struct nfs4_client *cb_clp; - struct list_head cb_per_client; u32 cb_minorversion; struct rpc_message cb_msg; struct nfsd4_callback_ops *cb_ops; struct work_struct cb_work; int cb_status; - bool cb_done; + bool cb_need_restart; }; struct nfsd4_callback_ops { @@ -334,7 +333,6 @@ struct nfs4_client { int cl_cb_state; struct nfsd4_callback cl_cb_null; struct nfsd4_session *cl_cb_session; - struct list_head cl_callbacks; /* list of in-progress callbacks */ /* for all client information that callback code might need: */ spinlock_t cl_lock; -- cgit v0.10.2 From 4bd9e9b77fc6787c45b8bb439f6511aa3478606c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2015 11:49:25 +0200 Subject: nfsd: skip CB_NULL probes for 4.1 or later With sessions in v4.1 or later we don't need to manually probe the backchannel connection, so we can declare it up instantly after setting up the RPC client. Note that we really should split nfsd4_run_cb_work in the long run, this is just the least intrusive fix for now. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index 4c993aa..5694cfb 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -1066,6 +1066,15 @@ nfsd4_run_cb_work(struct work_struct *work) cb->cb_ops->release(cb); return; } + + /* + * Don't send probe messages for 4.1 or later. + */ + if (!cb->cb_ops && clp->cl_minorversion) { + clp->cl_cb_state = NFSD4_CB_UP; + return; + } + cb->cb_msg.rpc_cred = clp->cl_cb_cred; rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | RPC_TASK_SOFTCONN, cb->cb_ops ? &nfsd4_cb_ops : &nfsd4_cb_probe_ops, cb); -- cgit v0.10.2 From 1819e3034ee26ffadc71880064ed8b8e7d74f52c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 1 Mar 2015 21:07:08 +0200 Subject: ARM: dts: OMAP3-N900: Add microphone bias voltages N900 audio recording needs that codec provides bias voltage for integrated digital microphone and headset microphone depending which one is used. Digital microphone uses 2 V bias and it comes from the codec A part. Codec B part drives the headset microphone bias and that is set to 2.5 V. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Pavel Machek [Jarkko: Headset mic bias changed to 2 (2.5 V) as it was before commit e2e8bfdf6157 ("ASoC: tlv320aic3x: Convert mic bias to a supply widget")] Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index a293158..5c16145 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -498,6 +498,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { @@ -509,6 +511,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { -- cgit v0.10.2 From 67defd5c0ee5270948104784c8fc8f6d4a99682b Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 24 Mar 2015 12:19:19 +0200 Subject: ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO We need to enable EXTCON_USB_GPIO_USB and not EXTCON_GPIO_USB. Fixes: c08a54c0ebeb ("ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB") Reported-by: Nishant Menon Signed-off-by: Roger Quadros Acked-by-by: Nishanth Menon Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9ff7b54..3743ca2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXTCON=m -CONFIG_EXTCON_GPIO=m +CONFIG_EXTCON_USB_GPIO=m CONFIG_EXTCON_PALMAS=m CONFIG_TI_EMIF=m CONFIG_PWM=y -- cgit v0.10.2 From 2055088b5e17b450fcfb536568aee00eccd0ced5 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 31 Mar 2015 03:28:10 +0200 Subject: ARM: dts: omap3: Add #iommu-cells to isp and iva iommu Add missing #iommu-cells property to the isp and iva iommu nodes. This fixes the binding (property is required according to the generic iommu binding) and removes the following kernel warning triggered once the iommu nodes are referenced: [ 0.647521] /ocp/isp@480bc000: could not get #iommu-cells for /ocp/mmu@480bd400 Signed-off-by: Sebastian Reichel Cc: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d18a90f..69a40cf 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -456,6 +456,7 @@ }; mmu_isp: mmu@480bd400 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x480bd400 0x80>; interrupts = <24>; @@ -464,6 +465,7 @@ }; mmu_iva: mmu@5d000000 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x5d000000 0x80>; interrupts = <28>; -- cgit v0.10.2 From e7a7357341664148cabf98a3ab50b5d449afca0b Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 8 Apr 2015 18:56:26 -0500 Subject: ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x The interrupt polarity provided in devicetree is used to configure the interrupt controller(ARM GIC), however, it seems that we have an inverter at the GIC boundary inside AM57xx which inverts the signal input from sys_irq external interrupt source. Further, as per GIC distributor TRM, http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438d/BGBHIACJ.html#BABJFCFB ARM GIC distributor does not support IRQ trigger type IRQ_TYPE_LEVEL_LOW, and only rising or level high signals. However, for some reason, the current configuration(which gets ignored by GIC driver) functions on some platforms, however, on few platforms results in infinite interrupts hogging the system down. Switch over to rising edge for GIC configuration which is also aligned with trigger point from the RTC chip and the internal inversion. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by: Grygorii Strashko Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 15f198e..7ac6ee2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -455,7 +455,7 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupts = ; /* IRQ_SYS_1N */ + interrupts = ; /* IRQ_SYS_1N */ pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; -- cgit v0.10.2 From 00edd3170c757772f74c533e61298be249447a11 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 8 Apr 2015 18:56:27 -0500 Subject: ARM: dts: am57xx-beagle-x15: Fix RTC aliases With commit bc078316d86c ("ARM: dts: DRA7: Add node for RTC"), we now have AM57xx RTC register itself as alias 0 even before DS1307 or TPS rtc drivers are loaded up. However, since neither TPS, nor AM57xx RTC are capable of being backedup by battery, we would like to maintain the "primary" rtc as mcp79410 rtc device. This also generates the following warnings in the bootlog highlighting the issue: [ 5.895445] rtc-ds1307 2-006f: /aliases ID 0 not available ... [ 6.476285] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: /aliases ID 1 not available So, add proper aliases to ensure that RTC order is always consistent to userspace immaterial of probe order. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 7ac6ee2..be9b6a5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -18,6 +18,7 @@ aliases { rtc0 = &mcp_rtc; rtc1 = &tps659038_rtc; + rtc2 = &rtc; }; memory { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5332b57..0f73fea 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1203,7 +1203,7 @@ status = "disabled"; }; - rtc@48838000 { + rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; interrupts = , -- cgit v0.10.2 From faa4ec1eedbe6d352dc22c945540a64b5c896a95 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 9 Apr 2015 10:59:26 -0500 Subject: ARM: dts: am437x-sk: fix for new newhaven display module revision AM437x Starter Kit uses a NewHaven Display module with a 4.3" display and EDT FT5306 touchscreen On that module's new revision, NewHave decided to change the pinout on the 6 pin flat-pcb touchscreen connector so that instead of having WAKE pin, we now have RESETn. The new display module is available on AM437x SK Beta and all new revisions while the older revision is only available on AM437x SK Alpha which, unfortunately, can't be supported anymore in mainline without a revert of this patch. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 8ae29c9..fbc50f9 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -473,7 +473,7 @@ interrupt-parent = <&gpio0>; interrupts = <31 0>; - wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; touchscreen-size-x = <480>; touchscreen-size-y = <272>; -- cgit v0.10.2 From f6b957fdce50ddbd1899948ab109cca64e571eba Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 9 Apr 2015 10:59:27 -0500 Subject: ARM: dts: am437x-sk: reduce col-scan-delay-us The new AM437x SK Beta boards have removed the large capacitors on the gpio-matrix column lines which means we can reduce col-scan-delay-us to 5us without loosing functionality. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index fbc50f9..c17097d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -49,7 +49,7 @@ pinctrl-0 = <&matrix_keypad_pins>; debounce-delay-ms = <5>; - col-scan-delay-us = <1500>; + col-scan-delay-us = <5>; row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ -- cgit v0.10.2 From 5eb6719816faad8e915d4f46ad61a440d641d183 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 8 Apr 2015 17:40:59 -0500 Subject: ARM: dts: am57xx-beagle-x15: Switch UART mux pins BeagleBoard-X15 pre-production change includes switching over to UART pins that now allow for UART download capability. All original boards should either have been returned for modifications or already modified for the required change and maintaining compatibility for older boards are no longer needed. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index be9b6a5..dd53ea5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -131,8 +131,8 @@ uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ + 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ >; }; @@ -479,7 +479,7 @@ &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x248>; + <&dra7_pmx_core 0x3f8>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_default>; -- cgit v0.10.2 From ed12f102ba9f55d2617fc6b5e4fbecbf9a132ba7 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 9 Apr 2015 17:33:17 -0500 Subject: ARM: dts: am57xx-beagle-x15: Switch GPIO fan number BeagleBoard-X15 pre-production change includes switching the GPIO fan gpio over from 1 to 2 to allow for a potential fix at a later point in time for USB client VBUS detection using PMIC VBUS detect capability. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index dd53ea5..7128fad 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -84,7 +84,7 @@ gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; #cooling-cells = <2>; -- cgit v0.10.2 From 1822734677d95888d18e3c0e0743727effa62f8e Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 16 Apr 2015 16:56:33 -0500 Subject: ARM: dts: dra7: Fix efuse register size for ABB Fix a typo in DRA7 dtsi where 12 bytes are needed for register description of ABB efuse registers, however only 8 bytes are provided to map. For some weird reason, this does not generate abort at offset 0x8, probably due to default maps already provided in io.c for the bus register ranges. Reported-by: Matt Gessner Reported-by: Suman Anna Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0f73fea..f03a091 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -911,7 +911,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, - <0x4ae06014 0x4>, <0x4a003b20 0x8>, + <0x4ae06014 0x4>, <0x4a003b20 0xc>, <0x4ae0c158 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -944,7 +944,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, - <0x4ae06010 0x4>, <0x4a0025cc 0x8>, + <0x4ae06010 0x4>, <0x4a0025cc 0xc>, <0x4a002470 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -977,7 +977,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, - <0x4ae06010 0x4>, <0x4a0025e0 0x8>, + <0x4ae06010 0x4>, <0x4a0025e0 0xc>, <0x4a00246c 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", @@ -1010,7 +1010,7 @@ ti,clock-cycles = <16>; reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, - <0x4ae06010 0x4>, <0x4a003b08 0x8>, + <0x4ae06010 0x4>, <0x4a003b08 0xc>, <0x4ae0c154 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", -- cgit v0.10.2 From 9a9324d3969678d44b330e1230ad2c8ae67acf81 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 4 May 2015 12:20:29 -0400 Subject: libata: Blacklist queued TRIM on all Samsung 800-series MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The queued TRIM problems appear to be generic to Samsung's firmware and not tied to a particular model. A recent update to the 840 EVO firmware introduced the same issue as we saw on 850 Pro. Blacklist queued TRIM on all 800-series drives while we work this issue with Samsung. Reported-by: Günter Waller Reported-by: Sven Köhler Signed-off-by: Martin K. Petersen Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 85e6599..577849c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4235,7 +4235,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Samsung SSD 850 PRO*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, /* -- cgit v0.10.2 From 4adf82c35572c69e96997641612fc88463b08f6f Mon Sep 17 00:00:00 2001 From: Illia Smyrnov Date: Thu, 16 Apr 2015 17:42:30 -0500 Subject: bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance The base address for DRA7 CLK1_HOST_CLK1_2 host instance is 0x44800000, so correct offset is 0x800000. DRA7 TRM rev X(fewb 2015) has updates for this information. With wrong offset these errors are not correctly cleared by the L3 IRQ handler and cause an continuous interrupt scenario and system lockup. Signed-off-by: Illia Smyrnov Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index 9525458..a314d80 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -274,7 +274,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = { static struct l3_target_data dra_l3_target_data_clk2[] = { {0x0, "HOST CLK1",}, - {0x0, "HOST CLK2",}, + {0x800000, "HOST CLK2",}, {0xdead, L3_TARGET_NOT_SUPPORTED,}, {0x3400, "SHA2_2",}, {0x0900, "BB2D",}, -- cgit v0.10.2 From e7309c2673a389a495fcfad70376d3bae8b9bc89 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 24 Apr 2015 12:54:20 -0500 Subject: bus: omap_l3_noc: Fix master id address decoding for OMAP5 The L3 Error handling on OMAP5 for the most part is very similar to that of OMAP4, and had leveraged common data structures and register layout definitions so far. Upon closer inspection, there are a few minor differences causing an incorrect decoding and reporting of the master NIU upon an error: 1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies 11 bits on OMAP5 as against 8 bits on OMAP4, with the master NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR field. 2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3 input sources on OMAP5. The common DEBUGSS source is at a different input on each SoC. Fix the above issues by using a OMAP5-specific compatible property and using SoC-specific data where there are differences. Signed-off-by: Suman Anna Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 974624e..161448d 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,7 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family + Should be "ti,omap5-l3-noc" for OMAP5 family Should be "ti,dra7-l3-noc" for DRA7 family Should be "ti,am4372-l3-noc" for AM43 family - reg: Contains L3 register address range for each noc domain. diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index efe5f73..7d24ae0 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -128,7 +128,7 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,omap5-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 11f7982..ebee57d 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -1,7 +1,7 @@ /* * OMAP L3 Interconnect error handling driver * - * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * Sricharan * @@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) } static const struct of_device_id l3_noc_match[] = { - {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data}, + {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data}, + {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data}, {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, {}, diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index a314d80..73431f8 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -1,7 +1,7 @@ /* * OMAP L3 Interconnect error handling driver header * - * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar * sricharan * @@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = { }; -static struct l3_target_data omap_l3_target_data_clk3[] = { - {0x0100, "EMUSS",}, - {0x0300, "DEBUG SOURCE",}, - {0x0, "HOST CLK3",}, +static struct l3_target_data omap4_l3_target_data_clk3[] = { + {0x0100, "DEBUGSS",}, }; -static struct l3_flagmux_data omap_l3_flagmux_clk3 = { +static struct l3_flagmux_data omap4_l3_flagmux_clk3 = { .offset = 0x0200, - .l3_targ = omap_l3_target_data_clk3, - .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3), + .l3_targ = omap4_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3), }; static struct l3_masters_data omap_l3_masters[] = { @@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = { { 0x32, "USBHOSTFS"} }; -static struct l3_flagmux_data *omap_l3_flagmux[] = { +static struct l3_flagmux_data *omap4_l3_flagmux[] = { &omap_l3_flagmux_clk1, &omap_l3_flagmux_clk2, - &omap_l3_flagmux_clk3, + &omap4_l3_flagmux_clk3, }; -static const struct omap_l3 omap_l3_data = { - .l3_flagmux = omap_l3_flagmux, - .num_modules = ARRAY_SIZE(omap_l3_flagmux), +static const struct omap_l3 omap4_l3_data = { + .l3_flagmux = omap4_l3_flagmux, + .num_modules = ARRAY_SIZE(omap4_l3_flagmux), .l3_masters = omap_l3_masters, .num_masters = ARRAY_SIZE(omap_l3_masters), /* The 6 MSBs of register field used to distinguish initiator */ .mst_addr_mask = 0xFC, }; +/* OMAP5 data */ +static struct l3_target_data omap5_l3_target_data_clk3[] = { + {0x0100, "L3INSTR",}, + {0x0300, "DEBUGSS",}, + {0x0, "HOSTCLK3",}, +}; + +static struct l3_flagmux_data omap5_l3_flagmux_clk3 = { + .offset = 0x0200, + .l3_targ = omap5_l3_target_data_clk3, + .num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3), +}; + +static struct l3_flagmux_data *omap5_l3_flagmux[] = { + &omap_l3_flagmux_clk1, + &omap_l3_flagmux_clk2, + &omap5_l3_flagmux_clk3, +}; + +static const struct omap_l3 omap5_l3_data = { + .l3_flagmux = omap5_l3_flagmux, + .num_modules = ARRAY_SIZE(omap5_l3_flagmux), + .l3_masters = omap_l3_masters, + .num_masters = ARRAY_SIZE(omap_l3_masters), + /* The 6 MSBs of register field used to distinguish initiator */ + .mst_addr_mask = 0x7E0, +}; + /* DRA7 data */ static struct l3_target_data dra_l3_target_data_clk1[] = { {0x2a00, "AES1",}, -- cgit v0.10.2 From 6b096fded15bbf0cd4b39fdab3dfe306210ad3f6 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sat, 2 May 2015 19:23:22 +0200 Subject: isdn/gigaset: cede maintainership MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As German phone operators are discontinuing ISDN service, neither Hansjörg nor I will be able to maintain the Gigaset ISDN drivers any longer. Paul Bolle offered to step into the breach for odd fixes. Signed-off-by: Tilman Schmidt Acked-by: Paul Bolle Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 1622775..fa4e59d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4364,11 +4364,10 @@ F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS -M: Hansjoerg Lipp -M: Tilman Schmidt +M: Paul Bolle L: gigaset307x-common@lists.sourceforge.net W: http://gigaset307x.sourceforge.net/ -S: Maintained +S: Odd Fixes F: Documentation/isdn/README.gigaset F: drivers/isdn/gigaset/ F: include/uapi/linux/gigaset_dev.h -- cgit v0.10.2 From d66bf7dd27573ee5ea90484899ee952c19ccb194 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sat, 2 May 2015 21:33:44 -0400 Subject: net: core: Correct an over-stringent device loop detection. The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by: Vladislav Yasevich Acked-by: Jiri Pirko Acked-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index c7ba038..2c1c67f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5209,7 +5209,7 @@ static int __netdev_upper_dev_link(struct net_device *dev, if (__netdev_find_adj(upper_dev, dev, &upper_dev->all_adj_list.upper)) return -EBUSY; - if (__netdev_find_adj(dev, upper_dev, &dev->all_adj_list.upper)) + if (__netdev_find_adj(dev, upper_dev, &dev->adj_list.upper)) return -EEXIST; if (master && netdev_master_upper_dev_get(dev)) -- cgit v0.10.2 From 013ead48a843442e63b9426e3bd5df18ca5d054a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 1 May 2015 12:34:12 +0200 Subject: drm/radeon: disable semaphores for UVD V1 (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware doesn't seem to work correctly, just block userspace in this case. v2: add missing defines Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320 Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index fafd8ce..8dbf508 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -1202,7 +1202,7 @@ static struct radeon_asic rs780_asic = { static struct radeon_asic_ring rv770_uvd_ring = { .ib_execute = &uvd_v1_0_ib_execute, .emit_fence = &uvd_v2_2_fence_emit, - .emit_semaphore = &uvd_v1_0_semaphore_emit, + .emit_semaphore = &uvd_v2_2_semaphore_emit, .cs_parse = &radeon_uvd_cs_parse, .ring_test = &uvd_v1_0_ring_test, .ib_test = &uvd_v1_0_ib_test, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index cf0a90b..a3ca8cd 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -949,6 +949,10 @@ void uvd_v1_0_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int uvd_v2_2_resume(struct radeon_device *rdev); void uvd_v2_2_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence); +bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev, + struct radeon_ring *ring, + struct radeon_semaphore *semaphore, + bool emit_wait); /* uvd v3.1 */ bool uvd_v3_1_semaphore_emit(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 3cf1e29..9ef2064 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -989,6 +989,9 @@ ((n) & 0x3FFF) << 16) /* UVD */ +#define UVD_SEMA_ADDR_LOW 0xef00 +#define UVD_SEMA_ADDR_HIGH 0xef04 +#define UVD_SEMA_CMD 0xef08 #define UVD_GPCOM_VCPU_CMD 0xef0c #define UVD_GPCOM_VCPU_DATA0 0xef10 #define UVD_GPCOM_VCPU_DATA1 0xef14 diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c index e72b3cb..c6b1cbc 100644 --- a/drivers/gpu/drm/radeon/uvd_v1_0.c +++ b/drivers/gpu/drm/radeon/uvd_v1_0.c @@ -466,18 +466,8 @@ bool uvd_v1_0_semaphore_emit(struct radeon_device *rdev, struct radeon_semaphore *semaphore, bool emit_wait) { - uint64_t addr = semaphore->gpu_addr; - - radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0)); - radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF); - - radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0)); - radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF); - - radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0)); - radeon_ring_write(ring, emit_wait ? 1 : 0); - - return true; + /* disable semaphores for UVD V1 hardware */ + return false; } /** diff --git a/drivers/gpu/drm/radeon/uvd_v2_2.c b/drivers/gpu/drm/radeon/uvd_v2_2.c index 8919351..7ed778c 100644 --- a/drivers/gpu/drm/radeon/uvd_v2_2.c +++ b/drivers/gpu/drm/radeon/uvd_v2_2.c @@ -60,6 +60,35 @@ void uvd_v2_2_fence_emit(struct radeon_device *rdev, } /** + * uvd_v2_2_semaphore_emit - emit semaphore command + * + * @rdev: radeon_device pointer + * @ring: radeon_ring pointer + * @semaphore: semaphore to emit commands for + * @emit_wait: true if we should emit a wait command + * + * Emit a semaphore command (either wait or signal) to the UVD ring. + */ +bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev, + struct radeon_ring *ring, + struct radeon_semaphore *semaphore, + bool emit_wait) +{ + uint64_t addr = semaphore->gpu_addr; + + radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0)); + radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF); + + radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0)); + radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF); + + radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0)); + radeon_ring_write(ring, emit_wait ? 1 : 0); + + return true; +} + +/** * uvd_v2_2_resume - memory controller programming * * @rdev: radeon_device pointer -- cgit v0.10.2 From b2387ddcced8de3e6471a2fb16a409577063016f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 1 May 2015 09:59:44 -0700 Subject: blk-mq: fix FUA request hang When a FUA request enters its DATA stage of flush pipeline, the request is added to mq requeue list, the request will then be added to ctx->rq_list. blk_mq_attempt_merge() might merge the request with a bio. Later when the request is finished the flush pipeline, the request->__data_len is 0. Then I only saw the bio gets endio called, the original request never finish. Adding REQ_FLUSH_SEQ into REQ_NOMERGE_FLAGS looks an easy fix. stable: 3.15+ Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index a1b25e3..b7299fe 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -220,7 +220,7 @@ enum rq_flag_bits { /* This mask is used for both bio and request merge checking */ #define REQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_FLUSH_SEQ) #define REQ_RAHEAD (1ULL << __REQ_RAHEAD) #define REQ_THROTTLED (1ULL << __REQ_THROTTLED) -- cgit v0.10.2 From 965b2aa78fbcb831acf4f669f494da201f4bcace Mon Sep 17 00:00:00 2001 From: Kamlakant Patel Date: Mon, 4 May 2015 14:39:49 +0530 Subject: net/smsc911x: fix irq resource allocation failure When smsc911x uses GPIO as the interrupt controller, and if both are loaded as modules, we get following error: "smsc911x: Could not allocate irq resource" This issue is because of smsc911x using platform_get_resource to get device tree based irq resource. commit "9ec36ca (of/irq: do irq resolution in platform_get_irq)" and commit "7085a7 (drivers: platform: parse IRQ flags from resources)" add support in platform_get_irq to resolve irq and irq_flags respectively for both modern device tree and legacy static platform data platforms. Modify smsc911x driver to use platform_get_irq to pick up irq resource correctly and use irq_get_trigger_type to get the IRQ trigger flags. Signed-off-by: Kamlakant Patel Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 41047c9..959aeea 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2418,9 +2418,9 @@ static int smsc911x_drv_probe(struct platform_device *pdev) struct net_device *dev; struct smsc911x_data *pdata; struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); - struct resource *res, *irq_res; + struct resource *res; unsigned int intcfg = 0; - int res_size, irq_flags; + int res_size, irq, irq_flags; int retval; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -2434,8 +2434,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) } res_size = resource_size(res); - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { pr_warn("Could not allocate irq resource\n"); retval = -ENODEV; goto out_0; @@ -2455,8 +2455,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); pdata = netdev_priv(dev); - dev->irq = irq_res->start; - irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; + dev->irq = irq; + irq_flags = irq_get_trigger_type(irq); pdata->ioaddr = ioremap_nocache(res->start, res_size); pdata->dev = dev; -- cgit v0.10.2 From a2d4fcb8043402fd24aaef7e00d4c24b1151cda4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 May 2015 15:12:33 -0400 Subject: Revert "Revert "smc91x: retrieve IRQ and trigger flags in a modern way"" This reverts commit 8d7d9cca4390062ccd09ffd9fdb37d1c4eeea9ac. Now that the necessary infrastructure is really all there in the tree, we can put this change back in. Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 14b363a..630f0b7 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2238,9 +2238,10 @@ static int smc_drv_probe(struct platform_device *pdev) const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; - struct resource *res, *ires; + struct resource *res; unsigned int __iomem *addr; unsigned long irq_flags = SMC_IRQ_FLAGS; + unsigned long irq_resflags; int ret; ndev = alloc_etherdev(sizeof(struct smc_local)); @@ -2332,16 +2333,19 @@ static int smc_drv_probe(struct platform_device *pdev) goto out_free_netdev; } - ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!ires) { + ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq <= 0) { ret = -ENODEV; goto out_release_io; } - - ndev->irq = ires->start; - - if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) - irq_flags = ires->flags & IRQF_TRIGGER_MASK; + /* + * If this platform does not specify any special irqflags, or if + * the resource supplies a trigger, override the irqflags with + * the trigger flags from the resource. + */ + irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq)); + if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK) + irq_flags = irq_resflags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); if (ret) -- cgit v0.10.2 From e2783717a71e9babfdd7c36c7e35b790d2c01022 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 4 May 2015 11:51:38 -0400 Subject: net/rds: Fix new sparse warning c0adf54a109 introduced new sparse warnings: CHECK /home/dahern/kernels/linux.git/net/rds/ib_cm.c net/rds/ib_cm.c:191:34: warning: incorrect type in initializer (different base types) net/rds/ib_cm.c:191:34: expected unsigned long long [unsigned] [usertype] dp_ack_seq net/rds/ib_cm.c:191:34: got restricted __be64 net/rds/ib_cm.c:194:51: warning: cast to restricted __be64 The temporary variable for sequence number should have been declared as __be64 rather than u64. Make it so. Signed-off-by: David Ahern Cc: shamir rabinovitch Signed-off-by: David S. Miller diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 29144a6..8a09ee7 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -188,7 +188,7 @@ void rds_ib_cm_connect_complete(struct rds_connection *conn, struct rdma_cm_even * Since dp_ack_seq is 64-bit extended load operations can be * used so go through get_unaligned to avoid unaligned errors. */ - u64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); + __be64 dp_ack_seq = get_unaligned(&dp->dp_ack_seq); if (dp_ack_seq) rds_send_drop_acked(conn, be64_to_cpu(dp_ack_seq), -- cgit v0.10.2 From 0650c0b8d9efe5b1205116a2febcb984c6c98472 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 4 May 2015 12:34:12 +0300 Subject: bnx2x: Fix to prevent inner-reload Submit 909d9faae2a44 ("bnx2x: Prevent inner-reload while VFs exist") contained a bug - MTU change was not prevented by it; Instead, it `randomally' prevented bnx2x_resume() from running [harmless yet wrong]. This moves the check to its correct spot. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8bb8f6..ec56a9b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -4786,6 +4786,11 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) { struct bnx2x *bp = netdev_priv(dev); + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); + return -EPERM; + } + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Can't perform change MTU during parity recovery\n"); return -EAGAIN; @@ -4938,11 +4943,6 @@ int bnx2x_resume(struct pci_dev *pdev) } bp = netdev_priv(dev); - if (pci_num_vf(bp->pdev)) { - DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); - return -EPERM; - } - if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Handling parity error recovery. Try again later\n"); return -EAGAIN; -- cgit v0.10.2 From 9ba52e5812e53f20f23600d79449a3ec05a0254f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 4 May 2015 14:32:48 -0600 Subject: blk-mq: don't lose requests if a stopped queue restarts Normally if driver is busy to dispatch a request the logic is like below: block layer: driver: __blk_mq_run_hw_queue a. blk_mq_stop_hw_queue b. rq add to ctx->dispatch later: 1. blk_mq_start_hw_queue 2. __blk_mq_run_hw_queue But it's possible step 1-2 runs between a and b. And since rq isn't in ctx->dispatch yet, step 2 will not run rq. The rq might get lost if there are no subsequent requests kick in. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe diff --git a/block/blk-mq.c b/block/blk-mq.c index 76f460e..e68b71b 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -858,6 +858,16 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx) spin_lock(&hctx->lock); list_splice(&rq_list, &hctx->dispatch); spin_unlock(&hctx->lock); + /* + * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but + * it's possible the queue is stopped and restarted again + * before this. Queue restart will dispatch requests. And since + * requests in rq_list aren't added into hctx->dispatch yet, + * the requests in rq_list might get lost. + * + * blk_mq_run_hw_queue() already checks the STOPPED bit + **/ + blk_mq_run_hw_queue(hctx, true); } } -- cgit v0.10.2 From 5463e7c18e51152104aba9614e6abfc039a8b710 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Tue, 21 Apr 2015 10:40:54 -0700 Subject: Revert "f2fs: enhance multi-threads performance" This reports performance regression by Yuanhan Liu. The basic idea was to reduce one-point mutex, but it turns out this causes another contention like context swithes. https://lkml.org/lkml/2015/4/21/11 Until finishing the analysis on this issue, I'd like to revert this for a while. This reverts commit 78373b7319abdf15050af5b1632c4c8b8b398f33. diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index b91b0e1..1e1aae6 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1513,6 +1513,7 @@ static int f2fs_write_data_pages(struct address_space *mapping, { struct inode *inode = mapping->host; struct f2fs_sb_info *sbi = F2FS_I_SB(inode); + bool locked = false; int ret; long diff; @@ -1533,7 +1534,13 @@ static int f2fs_write_data_pages(struct address_space *mapping, diff = nr_pages_to_write(sbi, DATA, wbc); + if (!S_ISDIR(inode->i_mode)) { + mutex_lock(&sbi->writepages); + locked = true; + } ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping); + if (locked) + mutex_unlock(&sbi->writepages); f2fs_submit_merged_bio(sbi, DATA, WRITE); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index d8921cf..8de34ab 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -625,6 +625,7 @@ struct f2fs_sb_info { struct mutex cp_mutex; /* checkpoint procedure lock */ struct rw_semaphore cp_rwsem; /* blocking FS operations */ struct rw_semaphore node_write; /* locking node writes */ + struct mutex writepages; /* mutex for writepages() */ wait_queue_head_t cp_wait; struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */ diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 160b883..b2dd1b0 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -1035,6 +1035,7 @@ try_onemore: sbi->raw_super = raw_super; sbi->raw_super_buf = raw_super_buf; mutex_init(&sbi->gc_mutex); + mutex_init(&sbi->writepages); mutex_init(&sbi->cp_mutex); init_rwsem(&sbi->node_write); clear_sbi_flag(sbi, SBI_POR_DOING); -- cgit v0.10.2 From 7263b1bd0490fca68ee7eedb0b6973cb86d4701c Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 22 Apr 2015 11:03:48 -0700 Subject: f2fs: fix wrong error hanlder in f2fs_follow_link The page_follow_link_light returns NULL and its error pointer was remained in nd->path. Reported-by: Dan Carpenter Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 7e3794e..658e807 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -298,16 +298,14 @@ fail: static void *f2fs_follow_link(struct dentry *dentry, struct nameidata *nd) { - struct page *page; + struct page *page = page_follow_link_light(dentry, nd); - page = page_follow_link_light(dentry, nd); - if (IS_ERR(page)) + if (IS_ERR_OR_NULL(page)) return page; /* this is broken symlink case */ if (*nd_get_link(nd) == 0) { - kunmap(page); - page_cache_release(page); + page_put_link(dentry, nd, page); return ERR_PTR(-ENOENT); } return page; -- cgit v0.10.2 From e8a4a2696fecb398b0288c43c0e0dbb91e265bb2 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Mon, 4 May 2015 21:15:31 -0700 Subject: x86/spinlocks: Fix regression in spinlock contention detection A spinlock is regarded as contended when there is at least one waiter. Currently, the code that checks whether there are any waiters rely on tail value being greater than head. However, this is not true if tail reaches the max value and wraps back to zero, so arch_spin_is_contended() incorrectly returns 0 (not contended) when tail is smaller than head. The original code (before regression) handled this case by casting the (tail - head) to an unsigned value. This change simply restores that behavior. Fixes: d6abfdb20223 ("x86/spinlocks/paravirt: Fix memory corruption on unlock") Signed-off-by: Tahsin Erdogan Cc: peterz@infradead.org Cc: Waiman.Long@hp.com Cc: borntraeger@de.ibm.com Cc: oleg@redhat.com Cc: raghavendra.kt@linux.vnet.ibm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1430799331-20445-1-git-send-email-tahsin@google.com Signed-off-by: Thomas Gleixner diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index cf87de3..64b6117 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock) struct __raw_tickets tmp = READ_ONCE(lock->tickets); tmp.head &= ~TICKET_SLOWPATH_FLAG; - return (tmp.tail - tmp.head) > TICKET_LOCK_INC; + return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC; } #define arch_spin_is_contended arch_spin_is_contended -- cgit v0.10.2 From 285214409a9e5fceba2215461b4682b6069d8e77 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 20 Apr 2015 14:01:11 -0600 Subject: RDMA/CMA: Canonize IPv4 on IPV6 sockets properly When accepting a new IPv4 connect to an IPv6 socket, the CMA tries to canonize the address family to IPv4, but does not properly process the listening sockaddr to get the listening port, and does not properly set the address family of the canonized sockaddr. Fixes: e51060f08a61 ("IB: IP address based RDMA connection manager") Cc: Reported-By: Yotam Kenneth Signed-off-by: Jason Gunthorpe Tested-by: Haggai Eran Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index d570030..06441a4 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -859,19 +859,27 @@ static void cma_save_ib_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id memcpy(&ib->sib_addr, &path->dgid, 16); } +static __be16 ss_get_port(const struct sockaddr_storage *ss) +{ + if (ss->ss_family == AF_INET) + return ((struct sockaddr_in *)ss)->sin_port; + else if (ss->ss_family == AF_INET6) + return ((struct sockaddr_in6 *)ss)->sin6_port; + BUG(); +} + static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id, struct cma_hdr *hdr) { - struct sockaddr_in *listen4, *ip4; + struct sockaddr_in *ip4; - listen4 = (struct sockaddr_in *) &listen_id->route.addr.src_addr; ip4 = (struct sockaddr_in *) &id->route.addr.src_addr; - ip4->sin_family = listen4->sin_family; + ip4->sin_family = AF_INET; ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr; - ip4->sin_port = listen4->sin_port; + ip4->sin_port = ss_get_port(&listen_id->route.addr.src_addr); ip4 = (struct sockaddr_in *) &id->route.addr.dst_addr; - ip4->sin_family = listen4->sin_family; + ip4->sin_family = AF_INET; ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr; ip4->sin_port = hdr->port; } @@ -879,16 +887,15 @@ static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_i static void cma_save_ip6_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id, struct cma_hdr *hdr) { - struct sockaddr_in6 *listen6, *ip6; + struct sockaddr_in6 *ip6; - listen6 = (struct sockaddr_in6 *) &listen_id->route.addr.src_addr; ip6 = (struct sockaddr_in6 *) &id->route.addr.src_addr; - ip6->sin6_family = listen6->sin6_family; + ip6->sin6_family = AF_INET6; ip6->sin6_addr = hdr->dst_addr.ip6; - ip6->sin6_port = listen6->sin6_port; + ip6->sin6_port = ss_get_port(&listen_id->route.addr.src_addr); ip6 = (struct sockaddr_in6 *) &id->route.addr.dst_addr; - ip6->sin6_family = listen6->sin6_family; + ip6->sin6_family = AF_INET6; ip6->sin6_addr = hdr->src_addr.ip6; ip6->sin6_port = hdr->port; } -- cgit v0.10.2 From 0b7410471d59ce2ea30453e68c03bdb941d5951e Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:44:58 +0530 Subject: iw_cxgb4: Cleanup register defines/MACROS Cleanup macros and register defines for consistency Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 57176dd..0493cca 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -675,7 +675,7 @@ static int send_connect(struct c4iw_ep *ep) if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) { opt2 |= T5_OPT_2_VALID_F; opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE); - opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */ + opt2 |= T5_ISS_F; } t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure); @@ -2214,7 +2214,7 @@ static void accept_cr(struct c4iw_ep *ep, struct sk_buff *skb, u32 isn = (prandom_u32() & ~7UL) - 1; opt2 |= T5_OPT_2_VALID_F; opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE); - opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */ + opt2 |= T5_ISS_F; rpl5 = (void *)rpl; memset(&rpl5->iss, 0, roundup(sizeof(*rpl5)-sizeof(*rpl), 16)); if (peer2peer) diff --git a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h index 5e53327..343e8daf 100644 --- a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h +++ b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h @@ -848,6 +848,8 @@ enum { /* TCP congestion control algorithms */ #define CONG_CNTRL_V(x) ((x) << CONG_CNTRL_S) #define CONG_CNTRL_G(x) (((x) >> CONG_CNTRL_S) & CONG_CNTRL_M) -#define CONG_CNTRL_VALID (1 << 18) +#define T5_ISS_S 18 +#define T5_ISS_V(x) ((x) << T5_ISS_S) +#define T5_ISS_F T5_ISS_V(1U) #endif /* _T4FW_RI_API_H_ */ -- cgit v0.10.2 From 6198dd8d7a6a7f40dc4599cb0676101d9cb82776 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:44:59 +0530 Subject: iw_cxgb4: 32b platform fixes - get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 0493cca..6fb31ba 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3571,7 +3571,7 @@ static void send_fw_pass_open_req(struct c4iw_dev *dev, struct sk_buff *skb, * TP will ignore any value > 0 for MSS index. */ req->tcb.opt0 = cpu_to_be64(MSS_IDX_V(0xF)); - req->cookie = (unsigned long)skb; + req->cookie = (uintptr_t)skb; set_wr_txq(req_skb, CPL_PRIORITY_CONTROL, port_id); ret = cxgb4_ofld_send(dev->rdev.lldi.ports[0], req_skb); diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index ab7692a..25dbd69 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -55,7 +55,7 @@ static int destroy_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, FW_RI_RES_WR_NRES_V(1) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.cq.restype = FW_RI_RES_TYPE_CQ; res->u.cq.op = FW_RI_RES_OP_RESET; @@ -125,7 +125,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, FW_RI_RES_WR_NRES_V(1) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.cq.restype = FW_RI_RES_TYPE_CQ; res->u.cq.op = FW_RI_RES_OP_WRITE; @@ -970,8 +970,7 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries, } PDBG("%s cqid 0x%0x chp %p size %u memsize %zu, dma_addr 0x%0llx\n", __func__, chp->cq.cqid, chp, chp->cq.size, - chp->cq.memsize, - (unsigned long long) chp->cq.dma_addr); + chp->cq.memsize, (unsigned long long) chp->cq.dma_addr); return &chp->ibcq; err5: kfree(mm2); diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 8fb295e..7ed3253 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -151,7 +151,7 @@ static int wr_log_show(struct seq_file *seq, void *v) int prev_ts_set = 0; int idx, end; -#define ts2ns(ts) div64_ul((ts) * dev->rdev.lldi.cclk_ps, 1000) +#define ts2ns(ts) div64_u64((ts) * dev->rdev.lldi.cclk_ps, 1000) idx = atomic_read(&dev->rdev.wr_log_idx) & (dev->rdev.wr_log_size - 1); @@ -784,10 +784,10 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.start, rdev->lldi.vr->cq.size); - PDBG("udb len 0x%x udb base %llx db_reg %p gts_reg %p qpshift %lu " + PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu " "qpmask 0x%x cqshift %lu cqmask 0x%x\n", (unsigned)pci_resource_len(rdev->lldi.pdev, 2), - (u64)pci_resource_start(rdev->lldi.pdev, 2), + (void *)pci_resource_start(rdev->lldi.pdev, 2), rdev->lldi.db_reg, rdev->lldi.gts_reg, rdev->qpshift, rdev->qpmask, diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 3ef0cf9..cff815b 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -144,7 +144,7 @@ static int _c4iw_write_mem_inline(struct c4iw_rdev *rdev, u32 addr, u32 len, if (i == (num_wqe-1)) { req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR) | FW_WR_COMPL_F); - req->wr.wr_lo = (__force __be64)(unsigned long) &wr_wait; + req->wr.wr_lo = (__force __be64)&wr_wait; } else req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR)); req->wr.wr_mid = cpu_to_be32( @@ -676,12 +676,12 @@ struct ib_mr *c4iw_get_dma_mr(struct ib_pd *pd, int acc) mhp->attr.zbva = 0; mhp->attr.va_fbo = 0; mhp->attr.page_size = 0; - mhp->attr.len = ~0UL; + mhp->attr.len = ~0ULL; mhp->attr.pbl_size = 0; ret = write_tpt_entry(&rhp->rdev, 0, &stag, 1, php->pdid, FW_RI_STAG_NSMR, mhp->attr.perms, - mhp->attr.mw_bind_enable, 0, 0, ~0UL, 0, 0, 0); + mhp->attr.mw_bind_enable, 0, 0, ~0ULL, 0, 0, 0); if (ret) goto err1; diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 15cae5a..389ced3 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -275,7 +275,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, FW_RI_RES_WR_NRES_V(2) | FW_WR_COMPL_F); res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16)); - res_wr->cookie = (unsigned long) &wr_wait; + res_wr->cookie = (uintptr_t)&wr_wait; res = res_wr->res; res->u.sqrq.restype = FW_RI_RES_TYPE_SQ; res->u.sqrq.op = FW_RI_RES_OP_WRITE; @@ -1209,7 +1209,7 @@ static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp, wqe->flowid_len16 = cpu_to_be32( FW_WR_FLOWID_V(ep->hwtid) | FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16))); - wqe->cookie = (unsigned long) &ep->com.wr_wait; + wqe->cookie = (uintptr_t)&ep->com.wr_wait; wqe->u.fini.type = FW_RI_TYPE_FINI; ret = c4iw_ofld_send(&rhp->rdev, skb); @@ -1279,7 +1279,7 @@ static int rdma_init(struct c4iw_dev *rhp, struct c4iw_qp *qhp) FW_WR_FLOWID_V(qhp->ep->hwtid) | FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16))); - wqe->cookie = (unsigned long) &qhp->ep->com.wr_wait; + wqe->cookie = (uintptr_t)&qhp->ep->com.wr_wait; wqe->u.init.type = FW_RI_TYPE_INIT; wqe->u.init.mpareqbit_p2ptype = @@ -1766,11 +1766,11 @@ struct ib_qp *c4iw_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attrs, mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize); insert_mmap(ucontext, mm2); mm3->key = uresp.sq_db_gts_key; - mm3->addr = (__force unsigned long) qhp->wq.sq.udb; + mm3->addr = (__force unsigned long)qhp->wq.sq.udb; mm3->len = PAGE_SIZE; insert_mmap(ucontext, mm3); mm4->key = uresp.rq_db_gts_key; - mm4->addr = (__force unsigned long) qhp->wq.rq.udb; + mm4->addr = (__force unsigned long)qhp->wq.rq.udb; mm4->len = PAGE_SIZE; insert_mmap(ucontext, mm4); if (mm5) { -- cgit v0.10.2 From 09ece8b9e983fe858de6eab7a386d58d194227b6 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:45:00 +0530 Subject: iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQs For T5, we must not use the kdb/kgts registers, in order avoid db drops under extreme loads. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 25dbd69..68ddb37 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -156,12 +156,19 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, goto err4; cq->gen = 1; - cq->gts = rdev->lldi.gts_reg; cq->rdev = rdev; if (user) { - cq->ugts = (u64)pci_resource_start(rdev->lldi.pdev, 2) + - (cq->cqid << rdev->cqshift); - cq->ugts &= PAGE_MASK; + u32 off = (cq->cqid << rdev->cqshift) & PAGE_MASK; + + cq->ugts = (u64)rdev->bar2_pa + off; + } else if (is_t4(rdev->lldi.adapter_type)) { + cq->gts = rdev->lldi.gts_reg; + cq->qid_mask = -1U; + } else { + u32 off = ((cq->cqid << rdev->cqshift) & PAGE_MASK) + 12; + + cq->gts = rdev->bar2_kva + off; + cq->qid_mask = rdev->qpmask; } return 0; err4: diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h index 871cdca..7f2a6c2 100644 --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -539,6 +539,7 @@ struct t4_cq { size_t memsize; __be64 bits_type_ts; u32 cqid; + u32 qid_mask; int vector; u16 size; /* including status page */ u16 cidx; @@ -563,12 +564,12 @@ static inline int t4_arm_cq(struct t4_cq *cq, int se) set_bit(CQ_ARMED, &cq->flags); while (cq->cidx_inc > CIDXINC_M) { val = SEINTARM_V(0) | CIDXINC_V(CIDXINC_M) | TIMERREG_V(7) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc -= CIDXINC_M; } val = SEINTARM_V(se) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(6) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc = 0; return 0; @@ -601,7 +602,7 @@ static inline void t4_hwcq_consume(struct t4_cq *cq) u32 val; val = SEINTARM_V(0) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(7) | - INGRESSQID_V(cq->cqid); + INGRESSQID_V(cq->cqid & cq->qid_mask); writel(val, cq->gts); cq->cidx_inc = 0; } -- cgit v0.10.2 From 4a75a86c8d04390f268d7237cc49fe9a8e36efe7 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Wed, 22 Apr 2015 01:45:01 +0530 Subject: iw_cxgb4: enforce qp/cq id requirements Currently the iw_cxgb4 implementation requires the qp and cq qid densities to match as well as the qp and cq id ranges. So fail a device open if the device configuration doesn't meet the requirements. The reason for these restictions has to do with the fact that IQ qid X has a UGTS register in the same bar2 page as EQ qid X. Thus both qids need to be allocated to the same user process for security reasons. The logic that does this (the qpid allocator in iw_cxgb4/resource.c) handles this but requires the above restrictions. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 7ed3253..83209bb 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -765,6 +765,29 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) c4iw_init_dev_ucontext(rdev, &rdev->uctx); /* + * This implementation assumes udb_density == ucq_density! Eventually + * we might need to support this but for now fail the open. Also the + * cqid and qpid range must match for now. + */ + if (rdev->lldi.udb_density != rdev->lldi.ucq_density) { + pr_err(MOD "%s: unsupported udb/ucq densities %u/%u\n", + pci_name(rdev->lldi.pdev), rdev->lldi.udb_density, + rdev->lldi.ucq_density); + err = -EINVAL; + goto err1; + } + if (rdev->lldi.vr->qp.start != rdev->lldi.vr->cq.start || + rdev->lldi.vr->qp.size != rdev->lldi.vr->cq.size) { + pr_err(MOD "%s: unsupported qp and cq id ranges " + "qp start %u size %u cq start %u size %u\n", + pci_name(rdev->lldi.pdev), rdev->lldi.vr->qp.start, + rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.size, + rdev->lldi.vr->cq.size); + err = -EINVAL; + goto err1; + } + + /* * qpshift is the number of bits to shift the qpid left in order * to get the correct address of the doorbell for that qp. */ -- cgit v0.10.2 From 6eec177461751f0fe191cf9977cde692b9481d0a Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Tue, 21 Apr 2015 16:28:10 -0400 Subject: RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients Add functionality to enable the port mapper on the passive side to provide to its clients the actual (non-mapped) ip/tcp address information of the connecting peer 1) Adding remote_info_cb() to process the address info of the connecting peer The address info is provided by the user space port mapper service when the connection is initiated by the peer 2) Adding a hash list to store the remote address info 3) Adding functionality to add/remove the remote address info After the info has been provided to the port mapper client, it is removed from the hash list Signed-off-by: Tatyana Nikolova Reviewed-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c index b85ddbc..ab08170 100644 --- a/drivers/infiniband/core/iwpm_msg.c +++ b/drivers/infiniband/core/iwpm_msg.c @@ -468,7 +468,8 @@ add_mapping_response_exit: } EXPORT_SYMBOL(iwpm_add_mapping_cb); -/* netlink attribute policy for the response to add and query mapping request */ +/* netlink attribute policy for the response to add and query mapping request + * and response with remote address info */ static const struct nla_policy resp_query_policy[IWPM_NLA_RQUERY_MAPPING_MAX] = { [IWPM_NLA_QUERY_MAPPING_SEQ] = { .type = NLA_U32 }, [IWPM_NLA_QUERY_LOCAL_ADDR] = { .len = sizeof(struct sockaddr_storage) }, @@ -559,6 +560,76 @@ query_mapping_response_exit: } EXPORT_SYMBOL(iwpm_add_and_query_mapping_cb); +/* + * iwpm_remote_info_cb - Process a port mapper message, containing + * the remote connecting peer address info + */ +int iwpm_remote_info_cb(struct sk_buff *skb, struct netlink_callback *cb) +{ + struct nlattr *nltb[IWPM_NLA_RQUERY_MAPPING_MAX]; + struct sockaddr_storage *local_sockaddr, *remote_sockaddr; + struct sockaddr_storage *mapped_loc_sockaddr, *mapped_rem_sockaddr; + struct iwpm_remote_info *rem_info; + const char *msg_type; + u8 nl_client; + int ret = -EINVAL; + + msg_type = "Remote Mapping info"; + if (iwpm_parse_nlmsg(cb, IWPM_NLA_RQUERY_MAPPING_MAX, + resp_query_policy, nltb, msg_type)) + return ret; + + nl_client = RDMA_NL_GET_CLIENT(cb->nlh->nlmsg_type); + if (!iwpm_valid_client(nl_client)) { + pr_info("%s: Invalid port mapper client = %d\n", + __func__, nl_client); + return ret; + } + atomic_set(&echo_nlmsg_seq, cb->nlh->nlmsg_seq); + + local_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_QUERY_LOCAL_ADDR]); + remote_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_QUERY_REMOTE_ADDR]); + mapped_loc_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_LOC_ADDR]); + mapped_rem_sockaddr = (struct sockaddr_storage *) + nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_REM_ADDR]); + + if (mapped_loc_sockaddr->ss_family != local_sockaddr->ss_family || + mapped_rem_sockaddr->ss_family != remote_sockaddr->ss_family) { + pr_info("%s: Sockaddr family doesn't match the requested one\n", + __func__); + return ret; + } + rem_info = kzalloc(sizeof(struct iwpm_remote_info), GFP_ATOMIC); + if (!rem_info) { + pr_err("%s: Unable to allocate a remote info\n", __func__); + ret = -ENOMEM; + return ret; + } + memcpy(&rem_info->mapped_loc_sockaddr, mapped_loc_sockaddr, + sizeof(struct sockaddr_storage)); + memcpy(&rem_info->remote_sockaddr, remote_sockaddr, + sizeof(struct sockaddr_storage)); + memcpy(&rem_info->mapped_rem_sockaddr, mapped_rem_sockaddr, + sizeof(struct sockaddr_storage)); + rem_info->nl_client = nl_client; + + iwpm_add_remote_info(rem_info); + + iwpm_print_sockaddr(local_sockaddr, + "remote_info: Local sockaddr:"); + iwpm_print_sockaddr(mapped_loc_sockaddr, + "remote_info: Mapped local sockaddr:"); + iwpm_print_sockaddr(remote_sockaddr, + "remote_info: Remote sockaddr:"); + iwpm_print_sockaddr(mapped_rem_sockaddr, + "remote_info: Mapped remote sockaddr:"); + return ret; +} +EXPORT_SYMBOL(iwpm_remote_info_cb); + /* netlink attribute policy for the received request for mapping info */ static const struct nla_policy resp_mapinfo_policy[IWPM_NLA_MAPINFO_REQ_MAX] = { [IWPM_NLA_MAPINFO_ULIB_NAME] = { .type = NLA_STRING, diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c index 69e9f84..a626795 100644 --- a/drivers/infiniband/core/iwpm_util.c +++ b/drivers/infiniband/core/iwpm_util.c @@ -33,8 +33,10 @@ #include "iwpm_util.h" -#define IWPM_HASH_BUCKET_SIZE 512 -#define IWPM_HASH_BUCKET_MASK (IWPM_HASH_BUCKET_SIZE - 1) +#define IWPM_MAPINFO_HASH_SIZE 512 +#define IWPM_MAPINFO_HASH_MASK (IWPM_MAPINFO_HASH_SIZE - 1) +#define IWPM_REMINFO_HASH_SIZE 64 +#define IWPM_REMINFO_HASH_MASK (IWPM_REMINFO_HASH_SIZE - 1) static LIST_HEAD(iwpm_nlmsg_req_list); static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock); @@ -42,31 +44,49 @@ static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock); static struct hlist_head *iwpm_hash_bucket; static DEFINE_SPINLOCK(iwpm_mapinfo_lock); +static struct hlist_head *iwpm_reminfo_bucket; +static DEFINE_SPINLOCK(iwpm_reminfo_lock); + static DEFINE_MUTEX(iwpm_admin_lock); static struct iwpm_admin_data iwpm_admin; int iwpm_init(u8 nl_client) { + int ret = 0; if (iwpm_valid_client(nl_client)) return -EINVAL; mutex_lock(&iwpm_admin_lock); if (atomic_read(&iwpm_admin.refcount) == 0) { - iwpm_hash_bucket = kzalloc(IWPM_HASH_BUCKET_SIZE * + iwpm_hash_bucket = kzalloc(IWPM_MAPINFO_HASH_SIZE * sizeof(struct hlist_head), GFP_KERNEL); if (!iwpm_hash_bucket) { - mutex_unlock(&iwpm_admin_lock); + ret = -ENOMEM; pr_err("%s Unable to create mapinfo hash table\n", __func__); - return -ENOMEM; + goto init_exit; + } + iwpm_reminfo_bucket = kzalloc(IWPM_REMINFO_HASH_SIZE * + sizeof(struct hlist_head), GFP_KERNEL); + if (!iwpm_reminfo_bucket) { + kfree(iwpm_hash_bucket); + ret = -ENOMEM; + pr_err("%s Unable to create reminfo hash table\n", __func__); + goto init_exit; } } atomic_inc(&iwpm_admin.refcount); +init_exit: mutex_unlock(&iwpm_admin_lock); - iwpm_set_valid(nl_client, 1); - return 0; + if (!ret) { + iwpm_set_valid(nl_client, 1); + pr_debug("%s: Mapinfo and reminfo tables are created\n", + __func__); + } + return ret; } EXPORT_SYMBOL(iwpm_init); static void free_hash_bucket(void); +static void free_reminfo_bucket(void); int iwpm_exit(u8 nl_client) { @@ -81,7 +101,8 @@ int iwpm_exit(u8 nl_client) } if (atomic_dec_and_test(&iwpm_admin.refcount)) { free_hash_bucket(); - pr_debug("%s: Mapinfo hash table is destroyed\n", __func__); + free_reminfo_bucket(); + pr_debug("%s: Resources are destroyed\n", __func__); } mutex_unlock(&iwpm_admin_lock); iwpm_set_valid(nl_client, 0); @@ -89,7 +110,7 @@ int iwpm_exit(u8 nl_client) } EXPORT_SYMBOL(iwpm_exit); -static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage *, +static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage *, struct sockaddr_storage *); int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, @@ -99,9 +120,10 @@ int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, struct hlist_head *hash_bucket_head; struct iwpm_mapping_info *map_info; unsigned long flags; + int ret = -EINVAL; if (!iwpm_valid_client(nl_client)) - return -EINVAL; + return ret; map_info = kzalloc(sizeof(struct iwpm_mapping_info), GFP_KERNEL); if (!map_info) { pr_err("%s: Unable to allocate a mapping info\n", __func__); @@ -115,13 +137,16 @@ int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr, spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - hash_bucket_head = get_hash_bucket_head( + hash_bucket_head = get_mapinfo_hash_bucket( &map_info->local_sockaddr, &map_info->mapped_sockaddr); - hlist_add_head(&map_info->hlist_node, hash_bucket_head); + if (hash_bucket_head) { + hlist_add_head(&map_info->hlist_node, hash_bucket_head); + ret = 0; + } } spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); - return 0; + return ret; } EXPORT_SYMBOL(iwpm_create_mapinfo); @@ -136,9 +161,12 @@ int iwpm_remove_mapinfo(struct sockaddr_storage *local_sockaddr, spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - hash_bucket_head = get_hash_bucket_head( + hash_bucket_head = get_mapinfo_hash_bucket( local_sockaddr, mapped_local_addr); + if (!hash_bucket_head) + goto remove_mapinfo_exit; + hlist_for_each_entry_safe(map_info, tmp_hlist_node, hash_bucket_head, hlist_node) { @@ -152,6 +180,7 @@ int iwpm_remove_mapinfo(struct sockaddr_storage *local_sockaddr, } } } +remove_mapinfo_exit: spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); return ret; } @@ -166,7 +195,7 @@ static void free_hash_bucket(void) /* remove all the mapinfo data from the list */ spin_lock_irqsave(&iwpm_mapinfo_lock, flags); - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { hlist_for_each_entry_safe(map_info, tmp_hlist_node, &iwpm_hash_bucket[i], hlist_node) { @@ -180,6 +209,96 @@ static void free_hash_bucket(void) spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags); } +static void free_reminfo_bucket(void) +{ + struct hlist_node *tmp_hlist_node; + struct iwpm_remote_info *rem_info; + unsigned long flags; + int i; + + /* remove all the remote info from the list */ + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + for (i = 0; i < IWPM_REMINFO_HASH_SIZE; i++) { + hlist_for_each_entry_safe(rem_info, tmp_hlist_node, + &iwpm_reminfo_bucket[i], hlist_node) { + + hlist_del_init(&rem_info->hlist_node); + kfree(rem_info); + } + } + /* free the hash list */ + kfree(iwpm_reminfo_bucket); + iwpm_reminfo_bucket = NULL; + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); +} + +static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage *, + struct sockaddr_storage *); + +void iwpm_add_remote_info(struct iwpm_remote_info *rem_info) +{ + struct hlist_head *hash_bucket_head; + unsigned long flags; + + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + if (iwpm_reminfo_bucket) { + hash_bucket_head = get_reminfo_hash_bucket( + &rem_info->mapped_loc_sockaddr, + &rem_info->mapped_rem_sockaddr); + if (hash_bucket_head) + hlist_add_head(&rem_info->hlist_node, hash_bucket_head); + } + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); +} + +int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr, + struct sockaddr_storage *mapped_rem_addr, + struct sockaddr_storage *remote_addr, + u8 nl_client) +{ + struct hlist_node *tmp_hlist_node; + struct hlist_head *hash_bucket_head; + struct iwpm_remote_info *rem_info = NULL; + unsigned long flags; + int ret = -EINVAL; + + if (!iwpm_valid_client(nl_client)) { + pr_info("%s: Invalid client = %d\n", __func__, nl_client); + return ret; + } + spin_lock_irqsave(&iwpm_reminfo_lock, flags); + if (iwpm_reminfo_bucket) { + hash_bucket_head = get_reminfo_hash_bucket( + mapped_loc_addr, + mapped_rem_addr); + if (!hash_bucket_head) + goto get_remote_info_exit; + hlist_for_each_entry_safe(rem_info, tmp_hlist_node, + hash_bucket_head, hlist_node) { + + if (!iwpm_compare_sockaddr(&rem_info->mapped_loc_sockaddr, + mapped_loc_addr) && + !iwpm_compare_sockaddr(&rem_info->mapped_rem_sockaddr, + mapped_rem_addr)) { + + memcpy(remote_addr, &rem_info->remote_sockaddr, + sizeof(struct sockaddr_storage)); + iwpm_print_sockaddr(remote_addr, + "get_remote_info: Remote sockaddr:"); + + hlist_del_init(&rem_info->hlist_node); + kfree(rem_info); + ret = 0; + break; + } + } + } +get_remote_info_exit: + spin_unlock_irqrestore(&iwpm_reminfo_lock, flags); + return ret; +} +EXPORT_SYMBOL(iwpm_get_remote_info); + struct iwpm_nlmsg_request *iwpm_get_nlmsg_request(__u32 nlmsg_seq, u8 nl_client, gfp_t gfp) { @@ -409,31 +528,54 @@ static u32 iwpm_ipv4_jhash(struct sockaddr_in *ipv4_sockaddr) return hash; } -static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage - *local_sockaddr, - struct sockaddr_storage - *mapped_sockaddr) +static int get_hash_bucket(struct sockaddr_storage *a_sockaddr, + struct sockaddr_storage *b_sockaddr, u32 *hash) { - u32 local_hash, mapped_hash, hash; + u32 a_hash, b_hash; - if (local_sockaddr->ss_family == AF_INET) { - local_hash = iwpm_ipv4_jhash((struct sockaddr_in *) local_sockaddr); - mapped_hash = iwpm_ipv4_jhash((struct sockaddr_in *) mapped_sockaddr); + if (a_sockaddr->ss_family == AF_INET) { + a_hash = iwpm_ipv4_jhash((struct sockaddr_in *) a_sockaddr); + b_hash = iwpm_ipv4_jhash((struct sockaddr_in *) b_sockaddr); - } else if (local_sockaddr->ss_family == AF_INET6) { - local_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) local_sockaddr); - mapped_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) mapped_sockaddr); + } else if (a_sockaddr->ss_family == AF_INET6) { + a_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) a_sockaddr); + b_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) b_sockaddr); } else { pr_err("%s: Invalid sockaddr family\n", __func__); - return NULL; + return -EINVAL; } - if (local_hash == mapped_hash) /* if port mapper isn't available */ - hash = local_hash; + if (a_hash == b_hash) /* if port mapper isn't available */ + *hash = a_hash; else - hash = jhash_2words(local_hash, mapped_hash, 0); + *hash = jhash_2words(a_hash, b_hash, 0); + return 0; +} + +static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage + *local_sockaddr, struct sockaddr_storage + *mapped_sockaddr) +{ + u32 hash; + int ret; - return &iwpm_hash_bucket[hash & IWPM_HASH_BUCKET_MASK]; + ret = get_hash_bucket(local_sockaddr, mapped_sockaddr, &hash); + if (ret) + return NULL; + return &iwpm_hash_bucket[hash & IWPM_MAPINFO_HASH_MASK]; +} + +static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage + *mapped_loc_sockaddr, struct sockaddr_storage + *mapped_rem_sockaddr) +{ + u32 hash; + int ret; + + ret = get_hash_bucket(mapped_loc_sockaddr, mapped_rem_sockaddr, &hash); + if (ret) + return NULL; + return &iwpm_reminfo_bucket[hash & IWPM_REMINFO_HASH_MASK]; } static int send_mapinfo_num(u32 mapping_num, u8 nl_client, int iwpm_pid) @@ -512,7 +654,7 @@ int iwpm_send_mapinfo(u8 nl_client, int iwpm_pid) } skb_num++; spin_lock_irqsave(&iwpm_mapinfo_lock, flags); - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { hlist_for_each_entry(map_info, &iwpm_hash_bucket[i], hlist_node) { if (map_info->nl_client != nl_client) @@ -595,7 +737,7 @@ int iwpm_mapinfo_available(void) spin_lock_irqsave(&iwpm_mapinfo_lock, flags); if (iwpm_hash_bucket) { - for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) { + for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) { if (!hlist_empty(&iwpm_hash_bucket[i])) { full_bucket = 1; break; diff --git a/drivers/infiniband/core/iwpm_util.h b/drivers/infiniband/core/iwpm_util.h index 9777c86..ee2d9ff 100644 --- a/drivers/infiniband/core/iwpm_util.h +++ b/drivers/infiniband/core/iwpm_util.h @@ -76,6 +76,14 @@ struct iwpm_mapping_info { u8 nl_client; }; +struct iwpm_remote_info { + struct hlist_node hlist_node; + struct sockaddr_storage remote_sockaddr; + struct sockaddr_storage mapped_loc_sockaddr; + struct sockaddr_storage mapped_rem_sockaddr; + u8 nl_client; +}; + struct iwpm_admin_data { atomic_t refcount; atomic_t nlmsg_seq; @@ -128,6 +136,13 @@ int iwpm_wait_complete_req(struct iwpm_nlmsg_request *nlmsg_request); int iwpm_get_nlmsg_seq(void); /** + * iwpm_add_reminfo - Add remote address info of the connecting peer + * to the remote info hash table + * @reminfo: The remote info to be added + */ +void iwpm_add_remote_info(struct iwpm_remote_info *reminfo); + +/** * iwpm_valid_client - Check if the port mapper client is valid * @nl_client: The index of the netlink client * diff --git a/include/rdma/iw_portmap.h b/include/rdma/iw_portmap.h index 928b277..fda3167 100644 --- a/include/rdma/iw_portmap.h +++ b/include/rdma/iw_portmap.h @@ -148,6 +148,16 @@ int iwpm_add_mapping_cb(struct sk_buff *, struct netlink_callback *); int iwpm_add_and_query_mapping_cb(struct sk_buff *, struct netlink_callback *); /** + * iwpm_remote_info_cb - Process remote connecting peer address info, which + * the port mapper has received from the connecting peer + * + * @cb: Contains the received message (payload and netlink header) + * + * Stores the IPv4/IPv6 address info in a hash table + */ +int iwpm_remote_info_cb(struct sk_buff *, struct netlink_callback *); + +/** * iwpm_mapping_error_cb - Process port mapper notification for error * * @skb: @@ -175,6 +185,21 @@ int iwpm_mapping_info_cb(struct sk_buff *, struct netlink_callback *); int iwpm_ack_mapping_info_cb(struct sk_buff *, struct netlink_callback *); /** + * iwpm_get_remote_info - Get the remote connecting peer address info + * + * @mapped_loc_addr: Mapped local address of the listening peer + * @mapped_rem_addr: Mapped remote address of the connecting peer + * @remote_addr: To store the remote address of the connecting peer + * @nl_client: The index of the netlink client + * + * The remote address info is retrieved and provided to the client in + * the remote_addr. After that it is removed from the hash table + */ +int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr, + struct sockaddr_storage *mapped_rem_addr, + struct sockaddr_storage *remote_addr, u8 nl_client); + +/** * iwpm_create_mapinfo - Store local and mapped IPv4/IPv6 address * info in a hash table * @local_addr: Local ip/tcp address diff --git a/include/uapi/rdma/rdma_netlink.h b/include/uapi/rdma/rdma_netlink.h index de69170..6e4bb42 100644 --- a/include/uapi/rdma/rdma_netlink.h +++ b/include/uapi/rdma/rdma_netlink.h @@ -37,6 +37,7 @@ enum { RDMA_NL_IWPM_ADD_MAPPING, RDMA_NL_IWPM_QUERY_MAPPING, RDMA_NL_IWPM_REMOVE_MAPPING, + RDMA_NL_IWPM_REMOTE_INFO, RDMA_NL_IWPM_HANDLE_ERR, RDMA_NL_IWPM_MAPINFO, RDMA_NL_IWPM_MAPINFO_NUM, -- cgit v0.10.2 From 230da36ae919e690dbcc44d1be8a2154214c6e36 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Tue, 21 Apr 2015 16:28:25 -0400 Subject: RDMA/nes: Report the actual address of the remote connecting peer Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper and report the address info to the user space application at the time of connection establishment Signed-off-by: Tatyana Nikolova Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 3b2a6dc..9f9d5c5 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -116,6 +116,7 @@ static struct ibnl_client_cbs nes_nl_cb_table[] = { [RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb}, [RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb}, [RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb}, + [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb}, [RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb}, [RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb}, [RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb} diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 6f09a72..72b4341 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -596,27 +596,52 @@ static void nes_form_reg_msg(struct nes_vnic *nesvnic, memcpy(pm_msg->if_name, nesvnic->netdev->name, IWPM_IFNAME_SIZE); } +static void record_sockaddr_info(struct sockaddr_storage *addr_info, + nes_addr_t *ip_addr, u16 *port_num) +{ + struct sockaddr_in *in_addr = (struct sockaddr_in *)addr_info; + + if (in_addr->sin_family == AF_INET) { + *ip_addr = ntohl(in_addr->sin_addr.s_addr); + *port_num = ntohs(in_addr->sin_port); + } +} + /* * nes_record_pm_msg - Save the received mapping info */ static void nes_record_pm_msg(struct nes_cm_info *cm_info, struct iwpm_sa_data *pm_msg) { - struct sockaddr_in *mapped_loc_addr = - (struct sockaddr_in *)&pm_msg->mapped_loc_addr; - struct sockaddr_in *mapped_rem_addr = - (struct sockaddr_in *)&pm_msg->mapped_rem_addr; - - if (mapped_loc_addr->sin_family == AF_INET) { - cm_info->mapped_loc_addr = - ntohl(mapped_loc_addr->sin_addr.s_addr); - cm_info->mapped_loc_port = ntohs(mapped_loc_addr->sin_port); - } - if (mapped_rem_addr->sin_family == AF_INET) { - cm_info->mapped_rem_addr = - ntohl(mapped_rem_addr->sin_addr.s_addr); - cm_info->mapped_rem_port = ntohs(mapped_rem_addr->sin_port); - } + record_sockaddr_info(&pm_msg->mapped_loc_addr, + &cm_info->mapped_loc_addr, &cm_info->mapped_loc_port); + + record_sockaddr_info(&pm_msg->mapped_rem_addr, + &cm_info->mapped_rem_addr, &cm_info->mapped_rem_port); +} + +/* + * nes_get_reminfo - Get the address info of the remote connecting peer + */ +static int nes_get_remote_addr(struct nes_cm_node *cm_node) +{ + struct sockaddr_storage mapped_loc_addr, mapped_rem_addr; + struct sockaddr_storage remote_addr; + int ret; + + nes_create_sockaddr(htonl(cm_node->mapped_loc_addr), + htons(cm_node->mapped_loc_port), &mapped_loc_addr); + nes_create_sockaddr(htonl(cm_node->mapped_rem_addr), + htons(cm_node->mapped_rem_port), &mapped_rem_addr); + + ret = iwpm_get_remote_info(&mapped_loc_addr, &mapped_rem_addr, + &remote_addr, RDMA_NL_NES); + if (ret) + nes_debug(NES_DBG_CM, "Unable to find remote peer address info\n"); + else + record_sockaddr_info(&remote_addr, &cm_node->rem_addr, + &cm_node->rem_port); + return ret; } /** @@ -1566,9 +1591,14 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core, return NULL; /* set our node specific transport info */ - cm_node->loc_addr = cm_info->loc_addr; + if (listener) { + cm_node->loc_addr = listener->loc_addr; + cm_node->loc_port = listener->loc_port; + } else { + cm_node->loc_addr = cm_info->loc_addr; + cm_node->loc_port = cm_info->loc_port; + } cm_node->rem_addr = cm_info->rem_addr; - cm_node->loc_port = cm_info->loc_port; cm_node->rem_port = cm_info->rem_port; cm_node->mapped_loc_addr = cm_info->mapped_loc_addr; @@ -2151,6 +2181,7 @@ static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, cm_node->state = NES_CM_STATE_ESTABLISHED; if (datasize) { cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize; + nes_get_remote_addr(cm_node); handle_rcv_mpa(cm_node, skb); } else { /* rcvd ACK only */ dev_kfree_skb_any(skb); -- cgit v0.10.2 From 5b6b8fe64053b2649660ded2f3c5be25ebddbfdb Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 21 Apr 2015 16:28:41 -0400 Subject: RDMA/cxgb4: Report the actual address of the remote connecting peer Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 6fb31ba..3c3b00e 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -583,6 +583,22 @@ static void c4iw_record_pm_msg(struct c4iw_ep *ep, sizeof(ep->com.mapped_remote_addr)); } +static int get_remote_addr(struct c4iw_ep *ep) +{ + int ret; + + print_addr(&ep->com, __func__, "get_remote_addr"); + + ret = iwpm_get_remote_info(&ep->com.mapped_local_addr, + &ep->com.mapped_remote_addr, + &ep->com.remote_addr, RDMA_NL_C4IW); + if (ret) + pr_info(MOD "Unable to find remote peer addr info - err %d\n", + ret); + + return ret; +} + static void best_mtu(const unsigned short *mtus, unsigned short mtu, unsigned int *idx, int use_ts, int ipv6) { @@ -2352,27 +2368,57 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) state_set(&child_ep->com, CONNECTING); child_ep->com.dev = dev; child_ep->com.cm_id = NULL; + + /* + * The mapped_local and mapped_remote addresses get setup with + * the actual 4-tuple. The local address will be based on the + * actual local address of the connection, but on the port number + * of the parent listening endpoint. The remote address is + * setup based on a query to the IWPM since we don't know what it + * originally was before mapping. If no mapping was done, then + * mapped_remote == remote, and mapped_local == local. + */ if (iptype == 4) { struct sockaddr_in *sin = (struct sockaddr_in *) - &child_ep->com.local_addr; + &child_ep->com.mapped_local_addr; + sin->sin_family = PF_INET; sin->sin_port = local_port; sin->sin_addr.s_addr = *(__be32 *)local_ip; - sin = (struct sockaddr_in *)&child_ep->com.remote_addr; + + sin = (struct sockaddr_in *)&child_ep->com.local_addr; + sin->sin_family = PF_INET; + sin->sin_port = ((struct sockaddr_in *) + &parent_ep->com.local_addr)->sin_port; + sin->sin_addr.s_addr = *(__be32 *)local_ip; + + sin = (struct sockaddr_in *)&child_ep->com.mapped_remote_addr; sin->sin_family = PF_INET; sin->sin_port = peer_port; sin->sin_addr.s_addr = *(__be32 *)peer_ip; } else { struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) - &child_ep->com.local_addr; + &child_ep->com.mapped_local_addr; + sin6->sin6_family = PF_INET6; sin6->sin6_port = local_port; memcpy(sin6->sin6_addr.s6_addr, local_ip, 16); - sin6 = (struct sockaddr_in6 *)&child_ep->com.remote_addr; + + sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr; + sin6->sin6_family = PF_INET6; + sin6->sin6_port = ((struct sockaddr_in6 *) + &parent_ep->com.local_addr)->sin6_port; + memcpy(sin6->sin6_addr.s6_addr, local_ip, 16); + + sin6 = (struct sockaddr_in6 *)&child_ep->com.mapped_remote_addr; sin6->sin6_family = PF_INET6; sin6->sin6_port = peer_port; memcpy(sin6->sin6_addr.s6_addr, peer_ip, 16); } + memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr, + sizeof(child_ep->com.remote_addr)); + get_remote_addr(child_ep); + c4iw_get_ep(&parent_ep->com); child_ep->parent_ep = parent_ep; child_ep->tos = PASS_OPEN_TOS_G(ntohl(req->tos_stid)); diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 83209bb..1ffbd03 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -93,6 +93,7 @@ static struct ibnl_client_cbs c4iw_nl_cb_table[] = { [RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb}, [RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb}, [RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb}, + [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb}, [RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb}, [RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb} }; -- cgit v0.10.2 From c1d383b5785b1e0fb5fb862864712a7208219e6a Mon Sep 17 00:00:00 2001 From: Guy Shapiro Date: Wed, 15 Apr 2015 18:17:56 +0300 Subject: IB/core: dma map/unmap locking optimizations Currently, while mapping or unmapping pages for ODP, the umem mutex is locked and unlocked once for each page. Such lock/unlock operation take few tens to hundreds of nsecs. This makes a significant impact when mapping or unmapping few MBs of memory. To avoid this, the mutex should be locked only once per operation, and not per page. Signed-off-by: Guy Shapiro Acked-by: Shachar Raindel Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index 8b8cc6f..aba4739 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -446,7 +446,6 @@ static int ib_umem_odp_map_dma_single_page( int remove_existing_mapping = 0; int ret = 0; - mutex_lock(&umem->odp_data->umem_mutex); /* * Note: we avoid writing if seq is different from the initial seq, to * handle case of a racing notifier. This check also allows us to bail @@ -479,8 +478,6 @@ static int ib_umem_odp_map_dma_single_page( } out: - mutex_unlock(&umem->odp_data->umem_mutex); - /* On Demand Paging - avoid pinning the page */ if (umem->context->invalidate_range || !stored_page) put_page(page); @@ -586,6 +583,7 @@ int ib_umem_odp_map_dma_pages(struct ib_umem *umem, u64 user_virt, u64 bcnt, bcnt -= min_t(size_t, npages << PAGE_SHIFT, bcnt); user_virt += npages << PAGE_SHIFT; + mutex_lock(&umem->odp_data->umem_mutex); for (j = 0; j < npages; ++j) { ret = ib_umem_odp_map_dma_single_page( umem, k, base_virt_addr, local_page_list[j], @@ -594,6 +592,7 @@ int ib_umem_odp_map_dma_pages(struct ib_umem *umem, u64 user_virt, u64 bcnt, break; k++; } + mutex_unlock(&umem->odp_data->umem_mutex); if (ret < 0) { /* Release left over pages when handling errors. */ @@ -633,9 +632,9 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, * faults from completion. We might be racing with other * invalidations, so we must make sure we free each page only * once. */ + mutex_lock(&umem->odp_data->umem_mutex); for (addr = virt; addr < bound; addr += (u64)umem->page_size) { idx = (addr - ib_umem_start(umem)) / PAGE_SIZE; - mutex_lock(&umem->odp_data->umem_mutex); if (umem->odp_data->page_list[idx]) { struct page *page = umem->odp_data->page_list[idx]; struct page *head_page = compound_head(page); @@ -663,7 +662,7 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, umem->odp_data->page_list[idx] = NULL; umem->odp_data->dma_list[idx] = 0; } - mutex_unlock(&umem->odp_data->umem_mutex); } + mutex_unlock(&umem->odp_data->umem_mutex); } EXPORT_SYMBOL(ib_umem_odp_unmap_dma_pages); -- cgit v0.10.2 From 325ad0617adaf163e32dd2d857b90baf65a25b5b Mon Sep 17 00:00:00 2001 From: Guy Shapiro Date: Wed, 15 Apr 2015 18:17:57 +0300 Subject: IB/core: dma unmap optimizations While unmapping an ODP writable page, the dirty bit of the page is set. In order to do so, the head of the compound page is found. Currently, the compound head is found even on non-writable pages, where it is never used, leading to unnecessary cpu barrier that impacts performance. This patch moves the search for the compound head to be done only when needed. Signed-off-by: Guy Shapiro Acked-by: Shachar Raindel Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index aba4739..40becdb 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -637,7 +637,6 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, idx = (addr - ib_umem_start(umem)) / PAGE_SIZE; if (umem->odp_data->page_list[idx]) { struct page *page = umem->odp_data->page_list[idx]; - struct page *head_page = compound_head(page); dma_addr_t dma = umem->odp_data->dma_list[idx]; dma_addr_t dma_addr = dma & ODP_DMA_ADDR_MASK; @@ -645,7 +644,8 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, ib_dma_unmap_page(dev, dma_addr, PAGE_SIZE, DMA_BIDIRECTIONAL); - if (dma & ODP_WRITE_ALLOWED_BIT) + if (dma & ODP_WRITE_ALLOWED_BIT) { + struct page *head_page = compound_head(page); /* * set_page_dirty prefers being called with * the page lock. However, MMU notifiers are @@ -656,6 +656,7 @@ void ib_umem_odp_unmap_dma_pages(struct ib_umem *umem, u64 virt, * be removed. */ set_page_dirty(head_page); + } /* on demand pinning support */ if (!umem->context->invalidate_range) put_page(page); -- cgit v0.10.2 From 87a26e976cb93e26742224bdd39f51f7861aa9b7 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 21 Apr 2015 14:50:34 -0700 Subject: IB/qib: add acounting for MTRR There is no good reason not to, we eventually delete it as well. Cc: Toshi Kani Cc: Suresh Siddha Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Juergen Gross Cc: Daniel Vetter Cc: Andy Lutomirski Cc: Dave Airlie Cc: Antonino Daplas Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: Mike Marciniszyn Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index 81b225f..fe0850a 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -118,7 +118,7 @@ int qib_enable_wc(struct qib_devdata *dd) if (!ret) { int cookie; - cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0); + cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 1); if (cookie < 0) { { qib_devinfo(dd->pcidev, -- cgit v0.10.2 From d4988623cc605131bed8c77f007082c3555c39ee Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 22 Apr 2015 11:38:24 -0700 Subject: IB/qib: use arch_phys_wc_add() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver already makes use of ioremap_wc() on PIO buffers, so convert it to use arch_phys_wc_add(). The qib driver uses a mmap() special case for when PAT is not used, this behaviour used to be determined with a module parameter but since we have been asked to just remove that module parameter this checks for the WC cookie, if not set we can assume PAT was used. If its set we do what we used to do for the mmap for when MTRR was enabled. The removal of the module parameter is OK given that Andy notes that even if users of module parameter are still around it will not prevent loading of the module on recent kernels. Cc: Doug Ledford Cc: Toshi Kani Cc: Rickard Strandqvist Cc: Mike Marciniszyn Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: Dennis Dalessandro Cc: Andy Lutomirski Cc: Suresh Siddha Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Juergen Gross Cc: Daniel Vetter Cc: Dave Airlie Cc: Bjorn Helgaas Cc: Antonino Daplas Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: Dave Hansen Cc: Arnd Bergmann Cc: Michael S. Tsirkin Cc: Stefan Bader Cc: konrad.wilk@oracle.com Cc: ville.syrjala@linux.intel.com Cc: david.vrabel@citrix.com Cc: jbeulich@suse.com Cc: Roger Pau Monné Cc: infinipath@intel.com Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: Luis R. Rodriguez Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index ffd48bf..ba5173e2 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -1136,7 +1136,6 @@ extern struct qib_devdata *qib_lookup(int unit); extern u32 qib_cpulist_count; extern unsigned long *qib_cpulist; -extern unsigned qib_wc_pat; extern unsigned qib_cc_table_size; int qib_init(struct qib_devdata *, int); int init_chip_wc_pat(struct qib_devdata *dd, u32); diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 9ea6c44..7258818 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -835,7 +835,8 @@ static int mmap_piobufs(struct vm_area_struct *vma, vma->vm_flags &= ~VM_MAYREAD; vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; - if (qib_wc_pat) + /* We used PAT if wc_cookie == 0 */ + if (!dd->wc_cookie) vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT, diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 0d2ba59..4b927809 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -3315,11 +3315,9 @@ static int init_6120_variables(struct qib_devdata *dd) qib_6120_config_ctxts(dd); qib_set_ctxtcnt(dd); - if (qib_wc_pat) { - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; - } + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; set_6120_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index 22affda..00b2af2 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -4126,11 +4126,9 @@ static int qib_init_7220_variables(struct qib_devdata *dd) qib_7220_config_ctxts(dd); qib_set_ctxtcnt(dd); /* needed for PAT setup */ - if (qib_wc_pat) { - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; - } + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; set_7220_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index ef97b71..f32b462 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -6429,6 +6429,7 @@ static int qib_init_7322_variables(struct qib_devdata *dd) unsigned features, pidx, sbufcnt; int ret, mtu; u32 sbufs, updthresh; + resource_size_t vl15off; /* pport structs are contiguous, allocated after devdata */ ppd = (struct qib_pportdata *)(dd + 1); @@ -6677,29 +6678,27 @@ static int qib_init_7322_variables(struct qib_devdata *dd) qib_7322_config_ctxts(dd); qib_set_ctxtcnt(dd); - if (qib_wc_pat) { - resource_size_t vl15off; - /* - * We do not set WC on the VL15 buffers to avoid - * a rare problem with unaligned writes from - * interrupt-flushed store buffers, so we need - * to map those separately here. We can't solve - * this for the rarely used mtrr case. - */ - ret = init_chip_wc_pat(dd, 0); - if (ret) - goto bail; + /* + * We do not set WC on the VL15 buffers to avoid + * a rare problem with unaligned writes from + * interrupt-flushed store buffers, so we need + * to map those separately here. We can't solve + * this for the rarely used mtrr case. + */ + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; - /* vl15 buffers start just after the 4k buffers */ - vl15off = dd->physaddr + (dd->piobufbase >> 32) + - dd->piobcnt4k * dd->align4k; - dd->piovl15base = ioremap_nocache(vl15off, - NUM_VL15_BUFS * dd->align4k); - if (!dd->piovl15base) { - ret = -ENOMEM; - goto bail; - } + /* vl15 buffers start just after the 4k buffers */ + vl15off = dd->physaddr + (dd->piobufbase >> 32) + + dd->piobcnt4k * dd->align4k; + dd->piovl15base = ioremap_nocache(vl15off, + NUM_VL15_BUFS * dd->align4k); + if (!dd->piovl15base) { + ret = -ENOMEM; + goto bail; } + qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ ret = 0; diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index 2ee3695..7e00470 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -91,15 +91,6 @@ MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port"); unsigned qib_cc_table_size; module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO); MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984"); -/* - * qib_wc_pat parameter: - * 0 is WC via MTRR - * 1 is WC via PAT - * If PAT initialization fails, code reverts back to MTRR - */ -unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */ -module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO); -MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism"); static void verify_interrupt(unsigned long); @@ -1377,8 +1368,7 @@ static void cleanup_device_data(struct qib_devdata *dd) spin_unlock(&dd->pport[pidx].cc_shadow_lock); } - if (!qib_wc_pat) - qib_disable_wc(dd); + qib_disable_wc(dd); if (dd->pioavailregs_dma) { dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, @@ -1547,14 +1537,12 @@ static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto bail; } - if (!qib_wc_pat) { - ret = qib_enable_wc(dd); - if (ret) { - qib_dev_err(dd, - "Write combining not enabled (err %d): performance may be poor\n", - -ret); - ret = 0; - } + ret = qib_enable_wc(dd); + if (ret) { + qib_dev_err(dd, + "Write combining not enabled (err %d): performance may be poor\n", + -ret); + ret = 0; } qib_verify_pioperf(dd); diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index fe0850a..6d61ef9 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -116,21 +116,9 @@ int qib_enable_wc(struct qib_devdata *dd) } if (!ret) { - int cookie; - - cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 1); - if (cookie < 0) { - { - qib_devinfo(dd->pcidev, - "mtrr_add() WC for PIO bufs failed (%d)\n", - cookie); - ret = -EINVAL; - } - } else { - dd->wc_cookie = cookie; - dd->wc_base = (unsigned long) pioaddr; - dd->wc_len = (unsigned long) piolen; - } + dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen); + if (dd->wc_cookie < 0) + ret = -EINVAL; } return ret; @@ -142,18 +130,7 @@ int qib_enable_wc(struct qib_devdata *dd) */ void qib_disable_wc(struct qib_devdata *dd) { - if (dd->wc_cookie) { - int r; - - r = mtrr_del(dd->wc_cookie, dd->wc_base, - dd->wc_len); - if (r < 0) - qib_devinfo(dd->pcidev, - "mtrr_del(%lx, %lx, %lx) failed: %d\n", - dd->wc_cookie, dd->wc_base, - dd->wc_len, r); - dd->wc_cookie = 0; /* even on failure */ - } + arch_phys_wc_del(dd->wc_cookie); } /** -- cgit v0.10.2 From d9e7eb152bb24f06028a0d10b054e39ebdf14f9c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 10 Apr 2015 23:58:24 +0200 Subject: iommu/rockchip: Fix build without CONFIG_OF The rockchip iommu driver references its of_device_id table from the init function, which fails to build when the table is undefined: iommu/rockchip-iommu.c: In function 'rk_iommu_init': iommu/rockchip-iommu.c:1029:35: error: 'rk_iommu_dt_ids' undeclared (first use in this function) np = of_find_matching_node(NULL, rk_iommu_dt_ids); This removes the #ifdef and the corresponding of_match_ptr wrapper to make it build both with CONFIG_OF enabled or disabled. Signed-off-by: Arnd Bergmann Fixes: 425061b0f5074 ("iommu/rockchip: Play nice in multi-platform builds") Reviewed-by: Thierry Reding Reviewed-by: Heiko Stuebner Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c index 4015560..cab2145 100644 --- a/drivers/iommu/rockchip-iommu.c +++ b/drivers/iommu/rockchip-iommu.c @@ -1004,20 +1004,18 @@ static int rk_iommu_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id rk_iommu_dt_ids[] = { { .compatible = "rockchip,iommu" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, rk_iommu_dt_ids); -#endif static struct platform_driver rk_iommu_driver = { .probe = rk_iommu_probe, .remove = rk_iommu_remove, .driver = { .name = "rk_iommu", - .of_match_table = of_match_ptr(rk_iommu_dt_ids), + .of_match_table = rk_iommu_dt_ids, }, }; -- cgit v0.10.2 From d73a824acc705571c0f47596326d7967fba9a1d9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 4 May 2015 14:35:01 -0400 Subject: drm/radeon: don't setup audio on asics that don't support it bug: https://bugzilla.kernel.org/show_bug.cgi?id=97701 Reported-by: Mikael Pettersson Tested-by: Mikael Pettersson Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 8b82abb..dcb7796 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -464,6 +464,10 @@ void radeon_audio_detect(struct drm_connector *connector, return; rdev = connector->encoder->dev->dev_private; + + if (!radeon_audio_chipset_supported(rdev)) + return; + radeon_encoder = to_radeon_encoder(connector->encoder); dig = radeon_encoder->enc_priv; -- cgit v0.10.2 From 11fa7df1e12f19571bdce4580cbc63a8cb3e9e85 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 May 2015 12:14:03 +0300 Subject: ata: select DW_DMAC in case of SATA_DWC Since sata_dwc_460ex.c was moved to generic DMA driver we have to ensure that user can still compile it. Fixes: 8b3444852a2b (sata_dwc_460ex: move to generic DMA driver) Signed-off-by: Andy Shevchenko Signed-off-by: Tejun Heo diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ee5209f..9dca4b9 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -270,6 +270,7 @@ config ATA_PIIX config SATA_DWC tristate "DesignWare Cores SATA support" depends on 460EX + select DW_DMAC help This option enables support for the on-chip SATA controller of the AppliedMicro processor 460EX. -- cgit v0.10.2 From 6f317cfe42c9d8a7c9c1a327d2f1bcc517a3cd91 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 12 Apr 2015 21:10:35 +0200 Subject: drm/i915: Assume dual channel LVDS if pixel clock necessitates it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by: Lukas Wunner Tested-by: Lukas Wunner Reviewed-by: Ville Syrjälä Cc: stable@vger.kernel.org [Jani: included spec reference into the commit message] Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 5abda1d..ee621e3 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -848,6 +848,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder) if (i915.lvds_channel_mode > 0) return i915.lvds_channel_mode == 2; + /* single channel LVDS is limited to 112 MHz */ + if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + > 112999) + return true; + if (dmi_check_system(intel_dual_link_lvds)) return true; @@ -1111,6 +1116,8 @@ void intel_lvds_init(struct drm_device *dev) out: mutex_unlock(&dev->mode_config.mutex); + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder); DRM_DEBUG_KMS("detected %s-link lvds configuration\n", lvds_encoder->is_dual_link ? "dual" : "single"); @@ -1125,7 +1132,6 @@ out: } drm_connector_register(connector); - intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector, INVALID_PIPE); return; -- cgit v0.10.2 From 3916e3fd81021fb795bfbdb17f375b6b3685bced Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Mon, 4 May 2015 15:06:49 +0200 Subject: drm/i915: Add missing MacBook Pro models with dual channel LVDS Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3945b9d0864154bab3c607865b557cecc): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by: Lukas Wunner Acked-by: Jani Nikula Cc: stable@vger.kernel.org [Jani: included notes in the commit message for posterity] Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index ee621e3..fbcc7df 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -813,12 +813,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident = "Apple MacBook Pro (Core i5/i7 Series)", + .ident = "Apple MacBook Pro 15\" (2010)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro 15\" (2011)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro 15\" (2012)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"), + }, + }, { } /* terminating entry */ }; -- cgit v0.10.2 From d67e199611b986b345ea3087ee2e4a15da1c98b3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Apr 2015 16:46:28 +0300 Subject: efi: Fix error handling in add_sysfs_runtime_map_entry() I spotted two (difficult to hit) bugs while reviewing this. 1) There is a double free bug because we unregister "map_kset" in add_sysfs_runtime_map_entry() and also efi_runtime_map_init(). 2) If we fail to allocate "entry" then we should return ERR_PTR(-ENOMEM) instead of NULL. Signed-off-by: Dan Carpenter Cc: Dave Young Cc: Guangyu Sun Cc: Signed-off-by: Matt Fleming diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c index 87b8e3b..5c55227 100644 --- a/drivers/firmware/efi/runtime-map.c +++ b/drivers/firmware/efi/runtime-map.c @@ -120,7 +120,8 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) entry = kzalloc(sizeof(*entry), GFP_KERNEL); if (!entry) { kset_unregister(map_kset); - return entry; + map_kset = NULL; + return ERR_PTR(-ENOMEM); } memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size, @@ -132,6 +133,7 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) if (ret) { kobject_put(&entry->kobj); kset_unregister(map_kset); + map_kset = NULL; return ERR_PTR(ret); } @@ -195,8 +197,6 @@ out_add_entry: entry = *(map_entries + j); kobject_put(&entry->kobj); } - if (map_kset) - kset_unregister(map_kset); out: return ret; } -- cgit v0.10.2 From e59d29e88f7b7e3d1231202b0203d0af6f15a440 Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Tue, 28 Apr 2015 08:46:09 +0000 Subject: perf probe: Fix segfault if passed with ''. Since parse_perf_probe_point() deals with a user passed argument, we should not assume it to be a valid string. Without this patch, if pass '' to perf probe, a segfault raises: $ perf probe -a '' Segmentation fault This patch checks argument of parse_perf_probe_point() before string processing. After this patch: $ perf probe -a '' usage: perf probe [] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... Signed-off-by: Wang Nan Acked-by: Masami Hiramatsu Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Zefan Li Link: http://lkml.kernel.org/r/1430210769-94177-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index d8bb616..d05b77c 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -1084,6 +1084,8 @@ static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev) * * TODO:Group name support */ + if (!arg) + return -EINVAL; ptr = strpbrk(arg, ";=@+%"); if (ptr && *ptr == '=') { /* Event name */ -- cgit v0.10.2 From c0403ec0bb5a8c5b267fb7e16021bec0b17e4964 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 5 May 2015 15:15:56 +0200 Subject: Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY" This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent Reviewed-by: Horia Geanta Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 9eeea19..5503e43 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -925,10 +925,11 @@ static int crypt_convert(struct crypt_config *cc, switch (r) { /* async */ - case -EINPROGRESS: case -EBUSY: wait_for_completion(&ctx->restart); reinit_completion(&ctx->restart); + /* fall through*/ + case -EINPROGRESS: ctx->req = NULL; ctx->cc_sector++; continue; @@ -1345,8 +1346,10 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx); struct crypt_config *cc = io->cc; - if (error == -EINPROGRESS) + if (error == -EINPROGRESS) { + complete(&ctx->restart); return; + } if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post) error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq); @@ -1357,15 +1360,12 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, crypt_free_req(cc, req_of_dmreq(cc, dmreq), io->base_bio); if (!atomic_dec_and_test(&ctx->cc_pending)) - goto done; + return; if (bio_data_dir(io->base_bio) == READ) kcryptd_crypt_read_done(io); else kcryptd_crypt_write_io_submit(io, 1); -done: - if (!completion_done(&ctx->restart)) - complete(&ctx->restart); } static void kcryptd_crypt(struct work_struct *work) -- cgit v0.10.2 From cb31ef485dd4c6a205d1064b42027f82076d00c8 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Sun, 3 May 2015 22:35:05 +0800 Subject: init: fix regression by supporting devices with major:minor:offset format Commit 283e7ad02 ("init: stricter checking of major:minor root= values") was so strict that it exposed the fact that a previously unknown device format was being used. Distributions like Ubuntu uses klibc (rather than uswsusp) to resume system from hibernation. klibc expressed the swap partition/file in the form of major:minor:offset. For example, 8:3:0 represents a swap partition in klibc, and klibc's resume process in initrd will finally echo 8:3:0 to /sys/power/resume for manually resuming. However, due to commit 283e7ad02's stricter checking, 8:3:0 will be treated as an invalid device format, and manual resuming from hibernation will fail. Fix this by adding support for devices with major:minor:offset format when resuming from hibernation. Reported-by: Prigent, Christophe Signed-off-by: Chen Yu Acked-by: Rafael J. Wysocki Signed-off-by: Mike Snitzer diff --git a/init/do_mounts.c b/init/do_mounts.c index 8369ffa..a95bbdb 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -225,10 +225,11 @@ dev_t name_to_dev_t(const char *name) #endif if (strncmp(name, "/dev/", 5) != 0) { - unsigned maj, min; + unsigned maj, min, offset; char dummy; - if (sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) { + if ((sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) || + (sscanf(name, "%u:%u:%u:%c", &maj, &min, &offset, &dummy) == 3)) { res = MKDEV(maj, min); if (maj != MAJOR(res) || min != MINOR(res)) goto fail; -- cgit v0.10.2 From 471e70583217728955436a3fa6e5201e5c8c296a Mon Sep 17 00:00:00 2001 From: Honggang LI Date: Wed, 29 Apr 2015 17:40:44 +0800 Subject: IB/core: change rdma_gid2ip into void function as it always return zero Signed-off-by: Honggang Li Acked-by: Sean Hefty Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index f80da50..38339d2 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -472,13 +472,8 @@ int rdma_addr_find_dmac_by_grh(union ib_gid *sgid, union ib_gid *dgid, u8 *dmac, } sgid_addr, dgid_addr; - ret = rdma_gid2ip(&sgid_addr._sockaddr, sgid); - if (ret) - return ret; - - ret = rdma_gid2ip(&dgid_addr._sockaddr, dgid); - if (ret) - return ret; + rdma_gid2ip(&sgid_addr._sockaddr, sgid); + rdma_gid2ip(&dgid_addr._sockaddr, dgid); memset(&dev_addr, 0, sizeof(dev_addr)); @@ -512,10 +507,8 @@ int rdma_addr_find_smac_by_sgid(union ib_gid *sgid, u8 *smac, u16 *vlan_id) struct sockaddr_in6 _sockaddr_in6; } gid_addr; - ret = rdma_gid2ip(&gid_addr._sockaddr, sgid); + rdma_gid2ip(&gid_addr._sockaddr, sgid); - if (ret) - return ret; memset(&dev_addr, 0, sizeof(dev_addr)); ret = rdma_translate_ip(&gid_addr._sockaddr, &dev_addr, vlan_id); if (ret) diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index ce55906..ac54c27 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -160,7 +160,7 @@ static inline int rdma_ip2gid(struct sockaddr *addr, union ib_gid *gid) } /* Important - sockaddr should be a union of sockaddr_in and sockaddr_in6 */ -static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) +static inline void rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) { if (ipv6_addr_v4mapped((struct in6_addr *)gid)) { struct sockaddr_in *out_in = (struct sockaddr_in *)out; @@ -173,7 +173,6 @@ static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid) out_in->sin6_family = AF_INET6; memcpy(&out_in->sin6_addr.s6_addr, gid->raw, 16); } - return 0; } static inline void iboe_addr_get_sgid(struct rdma_dev_addr *dev_addr, -- cgit v0.10.2 From 0d0f738f6a11856a704dcd8fd3a008b200f17625 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 3 May 2015 09:48:26 -0400 Subject: IB/core: Fix unaligned accesses Addresses the following kernel logs seen during boot of sparc systems: Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Signed-off-by: David Ahern Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index e28a494..0c14191 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -437,39 +437,38 @@ static struct cm_id_private * cm_acquire_id(__be32 local_id, __be32 remote_id) return cm_id_priv; } -static void cm_mask_copy(u8 *dst, u8 *src, u8 *mask) +static void cm_mask_copy(u32 *dst, const u32 *src, const u32 *mask) { int i; - for (i = 0; i < IB_CM_COMPARE_SIZE / sizeof(unsigned long); i++) - ((unsigned long *) dst)[i] = ((unsigned long *) src)[i] & - ((unsigned long *) mask)[i]; + for (i = 0; i < IB_CM_COMPARE_SIZE; i++) + dst[i] = src[i] & mask[i]; } static int cm_compare_data(struct ib_cm_compare_data *src_data, struct ib_cm_compare_data *dst_data) { - u8 src[IB_CM_COMPARE_SIZE]; - u8 dst[IB_CM_COMPARE_SIZE]; + u32 src[IB_CM_COMPARE_SIZE]; + u32 dst[IB_CM_COMPARE_SIZE]; if (!src_data || !dst_data) return 0; cm_mask_copy(src, src_data->data, dst_data->mask); cm_mask_copy(dst, dst_data->data, src_data->mask); - return memcmp(src, dst, IB_CM_COMPARE_SIZE); + return memcmp(src, dst, sizeof(src)); } -static int cm_compare_private_data(u8 *private_data, +static int cm_compare_private_data(u32 *private_data, struct ib_cm_compare_data *dst_data) { - u8 src[IB_CM_COMPARE_SIZE]; + u32 src[IB_CM_COMPARE_SIZE]; if (!dst_data) return 0; cm_mask_copy(src, private_data, dst_data->mask); - return memcmp(src, dst_data->data, IB_CM_COMPARE_SIZE); + return memcmp(src, dst_data->data, sizeof(src)); } /* @@ -538,7 +537,7 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) static struct cm_id_private * cm_find_listen(struct ib_device *device, __be64 service_id, - u8 *private_data) + u32 *private_data) { struct rb_node *node = cm.listen_service_table.rb_node; struct cm_id_private *cm_id_priv; @@ -953,7 +952,7 @@ int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask, cm_mask_copy(cm_id_priv->compare_data->data, compare_data->data, compare_data->mask); memcpy(cm_id_priv->compare_data->mask, compare_data->mask, - IB_CM_COMPARE_SIZE); + sizeof(compare_data->mask)); } cm_id->state = IB_CM_LISTEN; diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index be068f4..8b76f0e 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -103,7 +103,7 @@ struct cm_req_msg { /* local ACK timeout:5, rsvd:3 */ u8 alt_offset139; - u8 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE]; + u32 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE / sizeof(u32)]; } __attribute__ ((packed)); @@ -801,7 +801,7 @@ struct cm_sidr_req_msg { __be16 rsvd; __be64 service_id; - u8 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE]; + u32 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE / sizeof(u32)]; } __attribute__ ((packed)); struct cm_sidr_rep_msg { diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 0e3ff30..39ed2d2 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -105,7 +105,8 @@ enum ib_cm_data_size { IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216, IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136, IB_CM_SIDR_REP_INFO_LENGTH = 72, - IB_CM_COMPARE_SIZE = 64 + /* compare done u32 at a time */ + IB_CM_COMPARE_SIZE = (64 / sizeof(u32)) }; struct ib_cm_id; @@ -337,8 +338,8 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id); #define IB_SDP_SERVICE_ID_MASK cpu_to_be64(0xFFFFFFFFFFFF0000ULL) struct ib_cm_compare_data { - u8 data[IB_CM_COMPARE_SIZE]; - u8 mask[IB_CM_COMPARE_SIZE]; + u32 data[IB_CM_COMPARE_SIZE]; + u32 mask[IB_CM_COMPARE_SIZE]; }; /** -- cgit v0.10.2 From 179d03bbfd2ebc63934753a696467d28bf9f5b64 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Tue, 5 May 2015 03:55:24 +0530 Subject: iw_cxgb4: Remove negative advice dmesg warnings Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 3c3b00e..bb95a6c 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2058,9 +2058,12 @@ static int act_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb) status, status2errno(status)); if (is_neg_adv(status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Connection problems for atid %u status %u (%s)\n", - atid, status, neg_adv_str(status)); + PDBG("%s Connection problems for atid %u status %u (%s)\n", + __func__, atid, status, neg_adv_str(status)); + ep->stats.connect_neg_adv++; + mutex_lock(&dev->rdev.stats.lock); + dev->rdev.stats.neg_adv++; + mutex_unlock(&dev->rdev.stats.lock); return 0; } @@ -2566,9 +2569,13 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb) ep = lookup_tid(t, tid); if (is_neg_adv(req->status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Negative advice on abort - tid %u status %d (%s)\n", - ep->hwtid, req->status, neg_adv_str(req->status)); + PDBG("%s Negative advice on abort- tid %u status %d (%s)\n", + __func__, ep->hwtid, req->status, + neg_adv_str(req->status)); + ep->stats.abort_neg_adv++; + mutex_lock(&dev->rdev.stats.lock); + dev->rdev.stats.neg_adv++; + mutex_unlock(&dev->rdev.stats.lock); return 0; } PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid, @@ -3977,9 +3984,11 @@ static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb) return 0; } if (is_neg_adv(req->status)) { - dev_warn(&dev->rdev.lldi.pdev->dev, - "Negative advice on abort - tid %u status %d (%s)\n", - ep->hwtid, req->status, neg_adv_str(req->status)); + PDBG("%s Negative advice on abort- tid %u status %d (%s)\n", + __func__, ep->hwtid, req->status, + neg_adv_str(req->status)); + ep->stats.abort_neg_adv++; + dev->rdev.stats.neg_adv++; kfree_skb(skb); return 0; } diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 1ffbd03..cf54d69 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -490,6 +490,7 @@ static int stats_show(struct seq_file *seq, void *v) dev->rdev.stats.act_ofld_conn_fails); seq_printf(seq, "PAS_OFLD_CONN_FAILS: %10llu\n", dev->rdev.stats.pas_ofld_conn_fails); + seq_printf(seq, "NEG_ADV_RCVD: %10llu\n", dev->rdev.stats.neg_adv); seq_printf(seq, "AVAILABLE IRD: %10u\n", dev->avail_ird); return 0; } @@ -561,10 +562,13 @@ static int dump_ep(int id, void *p, void *data) cc = snprintf(epd->buf + epd->pos, space, "ep %p cm_id %p qp %p state %d flags 0x%lx " "history 0x%lx hwtid %d atid %d " + "conn_na %u abort_na %u " "%pI4:%d/%d <-> %pI4:%d/%d\n", ep, ep->com.cm_id, ep->com.qp, (int)ep->com.state, ep->com.flags, ep->com.history, ep->hwtid, ep->atid, + ep->stats.connect_neg_adv, + ep->stats.abort_neg_adv, &lsin->sin_addr, ntohs(lsin->sin_port), ntohs(mapped_lsin->sin_port), &rsin->sin_addr, ntohs(rsin->sin_port), @@ -582,10 +586,13 @@ static int dump_ep(int id, void *p, void *data) cc = snprintf(epd->buf + epd->pos, space, "ep %p cm_id %p qp %p state %d flags 0x%lx " "history 0x%lx hwtid %d atid %d " + "conn_na %u abort_na %u " "%pI6:%d/%d <-> %pI6:%d/%d\n", ep, ep->com.cm_id, ep->com.qp, (int)ep->com.state, ep->com.flags, ep->com.history, ep->hwtid, ep->atid, + ep->stats.connect_neg_adv, + ep->stats.abort_neg_adv, &lsin6->sin6_addr, ntohs(lsin6->sin6_port), ntohs(mapped_lsin6->sin6_port), &rsin6->sin6_addr, ntohs(rsin6->sin6_port), diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index d87e165..97bb555 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -137,6 +137,7 @@ struct c4iw_stats { u64 tcam_full; u64 act_ofld_conn_fails; u64 pas_ofld_conn_fails; + u64 neg_adv; }; struct c4iw_hw_queue { @@ -814,6 +815,11 @@ struct c4iw_listen_ep { int backlog; }; +struct c4iw_ep_stats { + unsigned connect_neg_adv; + unsigned abort_neg_adv; +}; + struct c4iw_ep { struct c4iw_ep_common com; struct c4iw_ep *parent_ep; @@ -846,6 +852,7 @@ struct c4iw_ep { unsigned int retry_count; int snd_win; int rcv_win; + struct c4iw_ep_stats stats; }; static inline void print_addr(struct c4iw_ep_common *epc, const char *func, -- cgit v0.10.2 From 8f71c1a27b84948720be17fffba71a67a1f0942d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 5 May 2015 13:01:39 +0200 Subject: IPoIB/CM: Fix indentation level See also patch "IPoIB/cm: Add connected mode support for devices without SRQs" (commit ID 68e995a29572). Detected by smatch. Signed-off-by: Bart Van Assche Cc: Pradeep Satyanarayana Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 56959ad..cf32a778 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -386,8 +386,8 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i rx->rx_ring[i].mapping, GFP_KERNEL)) { ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); - ret = -ENOMEM; - goto err_count; + ret = -ENOMEM; + goto err_count; } ret = ipoib_cm_post_receive_nonsrq(dev, rx, &t->wr, t->sge, i); if (ret) { -- cgit v0.10.2 From 954138dc25dca0263f315c5a3450059df05a4ea1 Mon Sep 17 00:00:00 2001 From: Yann Droneaud Date: Mon, 4 May 2015 14:31:03 +0200 Subject: MAINTAINERS: add include/rdma/ to InfiniBand subsystem Most headers for InfiniBand/RDMA are located under include/rdma/ and include/uapi/rdma. Signed-off-by: Yann Droneaud Reviewed-by: Ira Weiny Signed-off-by: Doug Ledford diff --git a/MAINTAINERS b/MAINTAINERS index 781e099..c80714a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5053,6 +5053,8 @@ S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ F: include/uapi/linux/if_infiniband.h +F: include/uapi/rdma/ +F: include/rdma/ INOTIFY M: John McCutchan -- cgit v0.10.2 From b6b2bbe65b2117afd9766faa7cffea4d8f681455 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Tue, 5 May 2015 12:57:09 -0400 Subject: MAINTAINERS: Update InfiniBand subsystem maintainer Since Roland stepped down, the community asked me to take his place, and the nomination was followed by sufficient votes and no dissensions that we can move forward with the change. Signed-off-by: Doug Ledford diff --git a/MAINTAINERS b/MAINTAINERS index c80714a..40c14f1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5042,13 +5042,13 @@ S: Orphan F: drivers/video/fbdev/imsttfb.c INFINIBAND SUBSYSTEM -M: Roland Dreier +M: Doug Ledford M: Sean Hefty M: Hal Rosenstock L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git +T: git git://github.com/dledford/linux.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ -- cgit v0.10.2 From 5cec98834989a014a9560b1841649eaca95cf00e Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:12 -0400 Subject: xen/events: Clear cpu_evtchn_mask before resuming When a guest is resumed, the hypervisor may change event channel assignments. If this happens and the guest uses 2-level events it is possible for the interrupt to be claimed by wrong VCPU since cpu_evtchn_mask bits may be stale. This can happen even though evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that is passed in is not necessarily the original one (from pre-migration times) but instead is freshly allocated during resume and so any information about which CPU the channel was bound to is lost. Thus we should clear the mask during resume. We also need to make sure that bits for xenstore and console channels are set when these two subsystems are resumed. While rebind_evtchn_irq() (which is invoked for both of them on a resume) calls irq_set_affinity(), the latter will in fact postpone setting affinity until handling the interrupt. But because cpu_evtchn_mask will have bits for these two cleared we won't be able to take the interrupt. With that in mind, we need to bind those two channels explicitly in rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a pass through generic irq affinity code later, in case something needs to be updated there as well. (Also replace cpumask_of(0) with cpumask_of(info->cpu) in rebind_evtchn_irq(): it should be set to zero in preceding xen_irq_info_evtchn_setup().) Signed-off-by: Boris Ostrovsky Reported-by: Annie Li Cc: # 3.14+ Signed-off-by: David Vrabel diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c index 5db43fc..7dd4631 100644 --- a/drivers/xen/events/events_2l.c +++ b/drivers/xen/events/events_2l.c @@ -345,6 +345,15 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static void evtchn_2l_resume(void) +{ + int i; + + for_each_online_cpu(i) + memset(per_cpu(cpu_evtchn_mask, i), 0, sizeof(xen_ulong_t) * + EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD); +} + static const struct evtchn_ops evtchn_ops_2l = { .max_channels = evtchn_2l_max_channels, .nr_channels = evtchn_2l_max_channels, @@ -356,6 +365,7 @@ static const struct evtchn_ops evtchn_ops_2l = { .mask = evtchn_2l_mask, .unmask = evtchn_2l_unmask, .handle_events = evtchn_2l_handle_events, + .resume = evtchn_2l_resume, }; void __init xen_evtchn_2l_init(void) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 70fba97..a1ec564 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1279,8 +1279,9 @@ void rebind_evtchn_irq(int evtchn, int irq) mutex_unlock(&irq_mapping_update_lock); - /* new event channels are always bound to cpu 0 */ - irq_set_affinity(irq, cpumask_of(0)); + bind_evtchn_to_cpu(evtchn, info->cpu); + /* This will be deferred until interrupt is processed */ + irq_set_affinity(irq, cpumask_of(info->cpu)); /* Unmask the event channel. */ enable_irq(irq); -- cgit v0.10.2 From 16f1cf3ba7303228372d3756677bf7d10e79cf9f Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:13 -0400 Subject: xen/xenbus: Update xenbus event channel on resume After a resume the hypervisor/tools may change xenbus event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky Cc: Signed-off-by: David Vrabel diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 564b315..5390a67 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include @@ -735,6 +736,30 @@ static int __init xenstored_local_init(void) return err; } +static int xenbus_resume_cb(struct notifier_block *nb, + unsigned long action, void *data) +{ + int err = 0; + + if (xen_hvm_domain()) { + uint64_t v; + + err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); + if (!err && v) + xen_store_evtchn = v; + else + pr_warn("Cannot update xenstore event channel: %d\n", + err); + } else + xen_store_evtchn = xen_start_info->store_evtchn; + + return err; +} + +static struct notifier_block xenbus_resume_nb = { + .notifier_call = xenbus_resume_cb, +}; + static int __init xenbus_init(void) { int err = 0; @@ -793,6 +818,10 @@ static int __init xenbus_init(void) goto out_error; } + if ((xen_store_domain_type != XS_LOCAL) && + (xen_store_domain_type != XS_UNKNOWN)) + xen_resume_notifier_register(&xenbus_resume_nb); + #ifdef CONFIG_XEN_COMPAT_XENFS /* * Create xenfs mountpoint in /proc for compatibility with -- cgit v0.10.2 From b9d934f27c91b878c4b2e64299d6e419a4022f8d Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:14 -0400 Subject: xen/console: Update console event channel on resume After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky Cc: Signed-off-by: David Vrabel diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index f1e5742..5bab1c6 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -299,11 +299,27 @@ static int xen_initial_domain_console_init(void) return 0; } +static void xen_console_update_evtchn(struct xencons_info *info) +{ + if (xen_hvm_domain()) { + uint64_t v; + int err; + + err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (!err && v) + info->evtchn = v; + } else + info->evtchn = xen_start_info->console.domU.evtchn; +} + void xen_console_resume(void) { struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE); - if (info != NULL && info->irq) + if (info != NULL && info->irq) { + if (!xen_initial_domain()) + xen_console_update_evtchn(info); rebind_evtchn_irq(info->evtchn, info->irq); + } } static void xencons_disconnect_backend(struct xencons_info *info) -- cgit v0.10.2 From 16e6bd5970c88a2ac018b84a5f1dd5c2ff1fdf2c Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 29 Apr 2015 17:10:15 -0400 Subject: xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq() .. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to 'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu(). Signed-off-by: Boris Ostrovsky Tested-by: Annie Li Cc: Signed-off-by: David Vrabel diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index a1ec564..2b8553b 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -529,8 +529,8 @@ static unsigned int __startup_pirq(unsigned int irq) if (rc) goto err; - bind_evtchn_to_cpu(evtchn, 0); info->evtchn = evtchn; + bind_evtchn_to_cpu(evtchn, 0); rc = xen_evtchn_port_setup(info); if (rc) -- cgit v0.10.2 From a71dbdaa8ca2933391b08e0ae5567083e3af0892 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Mon, 4 May 2015 11:02:15 -0400 Subject: hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests Commit 61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue") makes AMD processors set SS to __KERNEL_DS in __switch_to() to deal with cases when SS is NULL. This breaks Xen PV guests who do not want to load SS with__KERNEL_DS. Since the problem that the commit is trying to address would have to be fixed in the hypervisor (if it in fact exists under Xen) there is no reason to set X86_BUG_SYSRET_SS_ATTRS flag for PV VPCUs here. This can be easily achieved by adding x86_hyper_xen_hvm.set_cpu_features op which will clear this flag. (And since this structure is no longer HVM-specific we should do some renaming). Signed-off-by: Boris Ostrovsky Reported-by: Sander Eikelenboom Signed-off-by: David Vrabel diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h index e42f758..055ea99 100644 --- a/arch/x86/include/asm/hypervisor.h +++ b/arch/x86/include/asm/hypervisor.h @@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper; /* Recognized hypervisors */ extern const struct hypervisor_x86 x86_hyper_vmware; extern const struct hypervisor_x86 x86_hyper_ms_hyperv; -extern const struct hypervisor_x86 x86_hyper_xen_hvm; +extern const struct hypervisor_x86 x86_hyper_xen; extern const struct hypervisor_x86 x86_hyper_kvm; extern void init_hypervisor(struct cpuinfo_x86 *c); diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c index 36ce402..d820d8e 100644 --- a/arch/x86/kernel/cpu/hypervisor.c +++ b/arch/x86/kernel/cpu/hypervisor.c @@ -27,8 +27,8 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] = { -#ifdef CONFIG_XEN_PVHVM - &x86_hyper_xen_hvm, +#ifdef CONFIG_XEN + &x86_hyper_xen, #endif &x86_hyper_vmware, &x86_hyper_ms_hyperv, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 94578ef..46957ea 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1760,6 +1760,9 @@ static struct notifier_block xen_hvm_cpu_notifier = { static void __init xen_hvm_guest_init(void) { + if (xen_pv_domain()) + return; + init_hvm_pv_info(); xen_hvm_init_shared_info(); @@ -1775,6 +1778,7 @@ static void __init xen_hvm_guest_init(void) xen_hvm_init_time_ops(); xen_hvm_init_mmu_ops(); } +#endif static bool xen_nopv = false; static __init int xen_parse_nopv(char *arg) @@ -1784,14 +1788,11 @@ static __init int xen_parse_nopv(char *arg) } early_param("xen_nopv", xen_parse_nopv); -static uint32_t __init xen_hvm_platform(void) +static uint32_t __init xen_platform(void) { if (xen_nopv) return 0; - if (xen_pv_domain()) - return 0; - return xen_cpuid_base(); } @@ -1809,11 +1810,19 @@ bool xen_hvm_need_lapic(void) } EXPORT_SYMBOL_GPL(xen_hvm_need_lapic); -const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = { - .name = "Xen HVM", - .detect = xen_hvm_platform, +static void xen_set_cpu_features(struct cpuinfo_x86 *c) +{ + if (xen_pv_domain()) + clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); +} + +const struct hypervisor_x86 x86_hyper_xen = { + .name = "Xen", + .detect = xen_platform, +#ifdef CONFIG_XEN_PVHVM .init_platform = xen_hvm_guest_init, +#endif .x2apic_available = xen_x2apic_para_available, + .set_cpu_features = xen_set_cpu_features, }; -EXPORT_SYMBOL(x86_hyper_xen_hvm); -#endif +EXPORT_SYMBOL(x86_hyper_xen); -- cgit v0.10.2 From de71ad2c97862eae1516aa36528cc3b317c17b2f Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Mon, 4 May 2015 15:16:44 -0300 Subject: x86: Make cpu_tss available to external modules Commit 75182b1632 ("x86/asm/entry: Switch all C consumers of kernel_stack to this_cpu_sp0()") changed current_thread_info to use this_cpu_sp0, and indirectly made it rely on init_tss which was exported with EXPORT_PER_CPU_SYMBOL_GPL. As a result some macros and inline functions such as set/get_fs, test_thread_flag and variants have been made unusable for external modules. Make cpu_tss exported with EXPORT_PER_CPU_SYMBOL so that these functions are accessible again, as they were previously. Signed-off-by: Marc Dionne Acked-by: Andy Lutomirski Link: http://lkml.kernel.org/r/1430763404-21221-1-git-send-email-marc.dionne@your-file-system.com Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 8213da6..bfc99b3 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = { .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 }, #endif }; -EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss); +EXPORT_PER_CPU_SYMBOL(cpu_tss); #ifdef CONFIG_X86_64 static DEFINE_PER_CPU(unsigned char, is_idle); -- cgit v0.10.2 From d467f7a405cf0e7f06ed8d3175607ebb4ed06671 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Thu, 26 Mar 2015 13:35:18 -0500 Subject: ipmi_ssif: Fix the logic on user-supplied addresses Returning zero is success. Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index f40e3bd..1de1914 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1832,7 +1832,7 @@ static int init_ipmi_ssif(void) rv = new_ssif_client(addr[i], adapter_name[i], dbg[i], slave_addrs[i], SI_HARDCODED); - if (!rv) + if (rv) pr_err(PFX "Couldn't add hardcoded device at addr 0x%x\n", addr[i]); -- cgit v0.10.2 From b0e9aaa99dfb3036829e91d4f0aae449639e221a Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 31 Mar 2015 12:48:53 -0500 Subject: ipmi:ssif: Ignore spaces when comparing I2C adapter names Some of the adapters have spaces in their names, but that's really hard to pass in as a module or kernel parameters. So ignore the spaces. Signed-off-by: Corey Minyard diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 653d5d7..31d1d65 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -505,7 +505,10 @@ at module load time (for a module) with: The addresses are normal I2C addresses. The adapter is the string name of the adapter, as shown in /sys/class/i2c-adapter/i2c-/name. -It is *NOT* i2c- itself. +It is *NOT* i2c- itself. Also, the comparison is done ignoring +spaces, so if the name is "This is an I2C chip" you can say +adapter_name=ThisisanI2cchip. This is because it's hard to pass in +spaces in kernel parameters. The debug flags are bit flags for each BMC found, they are: IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 1de1914..3c3b725 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1258,6 +1258,23 @@ static const struct file_operations smi_stats_proc_ops = { .release = single_release, }; +static int strcmp_nospace(char *s1, char *s2) +{ + while (*s1 && *s2) { + while (isspace(*s1)) + s1++; + while (isspace(*s2)) + s2++; + if (*s1 > *s2) + return 1; + if (*s1 < *s2) + return -1; + s1++; + s2++; + } + return 0; +} + static struct ssif_addr_info *ssif_info_find(unsigned short addr, char *adapter_name, bool match_null_name) @@ -1272,8 +1289,10 @@ restart: /* One is NULL and one is not */ continue; } - if (strcmp(info->adapter_name, adapter_name)) - /* Names to not match */ + if (adapter_name && + strcmp_nospace(info->adapter_name, + adapter_name)) + /* Names do not match */ continue; } found = info; @@ -1407,7 +1426,7 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) } else { no_support: /* Assume no multi-part or PEC support */ - pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", + pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n", rv, len, resp[2]); ssif_info->max_xmit_msg_size = 32; -- cgit v0.10.2 From 5e33cd0c5a299772b5ec1a493f0a77548664ae06 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 22 Feb 2015 10:21:07 -0800 Subject: ipmi: Remove incorrect use of seq_has_overflowed commit d6c5dc18d863 ("ipmi: Remove uses of return value of seq_printf") incorrectly changed the return value of various proc_show functions to use seq_has_overflowed(). These functions should return 0 on completion rather than 1/true on overflow. 1 is the same as #define SEQ_SKIP which would cause the output to not be emitted (skipped) instead. This is a logical defect only as the length of these outputs are all smaller than the initial allocation done by the seq filesystem. Signed-off-by: Joe Perches Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 9bb5928..bf75f63 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2000,7 +2000,7 @@ static int smi_ipmb_proc_show(struct seq_file *m, void *v) seq_printf(m, " %x", intf->channels[i].address); seq_putc(m, '\n'); - return seq_has_overflowed(m); + return 0; } static int smi_ipmb_proc_open(struct inode *inode, struct file *file) @@ -2023,7 +2023,7 @@ static int smi_version_proc_show(struct seq_file *m, void *v) ipmi_version_major(&intf->bmc->id), ipmi_version_minor(&intf->bmc->id)); - return seq_has_overflowed(m); + return 0; } static int smi_version_proc_open(struct inode *inode, struct file *file) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 5e90a18..468c75e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -3080,7 +3080,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v) seq_printf(m, "%s\n", si_to_str[smi->si_type]); - return seq_has_overflowed(m); + return 0; } static int smi_type_proc_open(struct inode *inode, struct file *file) @@ -3153,7 +3153,7 @@ static int smi_params_proc_show(struct seq_file *m, void *v) smi->irq, smi->slave_addr); - return seq_has_overflowed(m); + return 0; } static int smi_params_proc_open(struct inode *inode, struct file *file) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 3c3b725..ee3b8c5 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -1200,7 +1200,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v) { seq_puts(m, "ssif\n"); - return seq_has_overflowed(m); + return 0; } static int smi_type_proc_open(struct inode *inode, struct file *file) -- cgit v0.10.2 From b1e65e71535aa128089d4cb1b6d90db7551fcb05 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Fri, 10 Apr 2015 20:19:18 -0500 Subject: ipmi: Don't report err in the SI driver for SSIF devices Really ignore them by returning -ENODEV from the probe, but not doing anything. Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 468c75e..4612741 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2244,7 +2244,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, acpi_handle handle; acpi_status status; unsigned long long tmp; - int rv; + int rv = -EINVAL; acpi_dev = pnp_acpi_device(dev); if (!acpi_dev) @@ -2276,6 +2276,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, info->si_type = SI_BT; break; case 4: /* SSIF, just ignore */ + rv = -ENODEV; goto err_free; default: dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp); @@ -2336,7 +2337,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, err_free: kfree(info); - return -EINVAL; + return rv; } static void ipmi_pnp_remove(struct pnp_dev *dev) -- cgit v0.10.2 From df6dd1b35b0ec0ac6a5298378ceaf487091f448c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 27 Apr 2015 09:45:06 +0200 Subject: thinkpad_acpi: Fix warning for static not at beginning Fix the following warning: warning: "static" is not at beginning of declaration void static hotkey_mask_warn_incomplete_mask(void) ^ Signed-off-by: Jean Delvare Cc: Henrique de Moraes Holschuh Cc: Darren Hart Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7769575..9bb9ad6 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2115,7 +2115,7 @@ static int hotkey_mask_get(void) return 0; } -void static hotkey_mask_warn_incomplete_mask(void) +static void hotkey_mask_warn_incomplete_mask(void) { /* log only what the user can fix... */ const u32 wantedmask = hotkey_driver_mask & -- cgit v0.10.2 From 7aab5159fa0100ee3f80d1b0f55cd7e9b5823270 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Mon, 4 May 2015 10:57:16 -0700 Subject: hv_netvsc: remove unused variable in netvsc_send() With commit b56fc3c53654 ("hv_netvsc: Fix a bug in netvsc_start_xmit()"), skb variable is no longer used in netvsc_send. Remove variable and dead code that depended on it. Cc: Haiyang Zhang Cc: K. Y. Srinivasan Signed-off-by: Jerry Snitselaar Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 2d9ef53..ea091bc 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -826,7 +826,6 @@ int netvsc_send(struct hv_device *device, u16 q_idx = packet->q_idx; u32 pktlen = packet->total_data_buflen, msd_len = 0; unsigned int section_index = NETVSC_INVALID_INDEX; - struct sk_buff *skb = NULL; unsigned long flag; struct multi_send_data *msdp; struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL; @@ -924,12 +923,8 @@ int netvsc_send(struct hv_device *device, if (cur_send) ret = netvsc_send_pkt(cur_send, net_device); - if (ret != 0) { - if (section_index != NETVSC_INVALID_INDEX) - netvsc_free_send_slot(net_device, section_index); - } else if (skb) { - dev_kfree_skb_any(skb); - } + if (ret != 0 && section_index != NETVSC_INVALID_INDEX) + netvsc_free_send_slot(net_device, section_index); return ret; } -- cgit v0.10.2 From cae0633872fc8b0c34930dd2862856563bce58ec Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 5 May 2015 17:07:11 +0300 Subject: net/mlx4_en: Fix off-by-one in counters manipulation This caused the en_stats_adder helper to accumulate a field which is not related to the counter, fix that. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to show [..]') Signed-off-by: Eran Ben Elisha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 54f0e5a..0a56f01 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -139,7 +139,7 @@ static unsigned long en_stats_adder(__be64 *start, __be64 *next, int num) int i; int offset = next - start; - for (i = 0; i <= num; i++) { + for (i = 0; i < num; i++) { ret += be64_to_cpu(*curr); curr += offset; } -- cgit v0.10.2 From 2d3c739739e64619f4846746a06ff0a6adf8a155 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 5 May 2015 17:07:12 +0300 Subject: net/mlx4_core: Work properly with EQ numbers > 256 in SRIOV The Firmware uses dynamic EQs allocation based on number of VFs and max EQs that can be allocated. As a result, VF can have EQ numbers that are larger than 256. According to the firmware spec, the max value is limited to be 1024 (10 bits), adapt the relevant code accordingly. This bug was impossible to hit prior to commit 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") which actually enables large number of EQs for VFs. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index c7f28bf..92fce1b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2845,7 +2845,7 @@ int mlx4_SW2HW_EQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int eqn = vhcr->in_modifier; - int res_id = (slave << 8) | eqn; + int res_id = (slave << 10) | eqn; struct mlx4_eq_context *eqc = inbox->buf; int mtt_base = eq_get_mtt_addr(eqc) / dev->caps.mtt_entry_sz; int mtt_size = eq_get_mtt_size(eqc); @@ -3051,7 +3051,7 @@ int mlx4_HW2SW_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -3108,7 +3108,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) return 0; mutex_lock(&priv->mfunc.master.gen_eqe_mutex[slave]); - res_id = (slave << 8) | event_eq->eqn; + res_id = (slave << 10) | event_eq->eqn; err = get_res(dev, slave, res_id, RES_EQ, &req); if (err) goto unlock; @@ -3131,7 +3131,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) memcpy(mailbox->buf, (u8 *) eqe, 28); - in_modifier = (slave & 0xff) | ((event_eq->eqn & 0xff) << 16); + in_modifier = (slave & 0xff) | ((event_eq->eqn & 0x3ff) << 16); err = mlx4_cmd(dev, mailbox->dma, in_modifier, 0, MLX4_CMD_GEN_EQE, MLX4_CMD_TIME_CLASS_B, @@ -3157,7 +3157,7 @@ int mlx4_QUERY_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -4714,13 +4714,13 @@ static void rem_slave_eqs(struct mlx4_dev *dev, int slave) break; case RES_EQ_HW: - err = mlx4_cmd(dev, slave, eqn & 0xff, + err = mlx4_cmd(dev, slave, eqn & 0x3ff, 1, MLX4_CMD_HW2SW_EQ, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); if (err) mlx4_dbg(dev, "rem_slave_eqs: failed to move slave %d eqs %d to SW ownership\n", - slave, eqn); + slave, eqn & 0x3ff); atomic_dec(&eq->mtt->ref_count); state = RES_EQ_RESERVED; break; -- cgit v0.10.2 From c967a0873a7836c7a77bf611f1c7d3f47c554c45 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 5 May 2015 09:06:30 -0700 Subject: mpls: Move reserved label definitions Move to include/uapi/linux/mpls.h to be externally visibile. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h index bc9abfe..0fe6ea5 100644 --- a/include/uapi/linux/mpls.h +++ b/include/uapi/linux/mpls.h @@ -31,4 +31,14 @@ struct mpls_label { #define MPLS_LS_TTL_MASK 0x000000FF #define MPLS_LS_TTL_SHIFT 0 +/* Reserved labels */ +#define MPLS_LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ +#define MPLS_LABEL_ROUTER_ALERT 1 /* RFC3032 */ +#define MPLS_LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ +#define MPLS_LABEL_IMPLICIT_NULL 3 /* RFC3032 */ +#define MPLS_LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ +#define MPLS_LABEL_GAL 13 /* RFC5586 */ +#define MPLS_LABEL_OAM_ALERT 14 /* RFC3429 */ +#define MPLS_LABEL_EXTENSION 15 /* RFC7274 */ + #endif /* _UAPI_MPLS_H */ diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index 954810c..b6eb761 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -647,7 +647,7 @@ int nla_get_labels(const struct nlattr *nla, return -EINVAL; switch (dec.label) { - case LABEL_IMPLICIT_NULL: + case MPLS_LABEL_IMPLICIT_NULL: /* RFC3032: This is a label that an LSR may * assign and distribute, but which never * actually appears in the encapsulation. @@ -935,7 +935,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) } /* In case the predefined labels need to be populated */ - if (limit > LABEL_IPV4_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL) { struct net_device *lo = net->loopback_dev; rt0 = mpls_rt_alloc(lo->addr_len); if (!rt0) @@ -945,7 +945,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) rt0->rt_via_table = NEIGH_LINK_TABLE; memcpy(rt0->rt_via, lo->dev_addr, lo->addr_len); } - if (limit > LABEL_IPV6_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL) { struct net_device *lo = net->loopback_dev; rt2 = mpls_rt_alloc(lo->addr_len); if (!rt2) @@ -973,15 +973,15 @@ static int resize_platform_label_table(struct net *net, size_t limit) memcpy(labels, old, cp_size); /* If needed set the predefined labels */ - if ((old_limit <= LABEL_IPV6_EXPLICIT_NULL) && - (limit > LABEL_IPV6_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[LABEL_IPV6_EXPLICIT_NULL], rt2); + if ((old_limit <= MPLS_LABEL_IPV6_EXPLICIT_NULL) && + (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6_EXPLICIT_NULL], rt2); rt2 = NULL; } - if ((old_limit <= LABEL_IPV4_EXPLICIT_NULL) && - (limit > LABEL_IPV4_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[LABEL_IPV4_EXPLICIT_NULL], rt0); + if ((old_limit <= MPLS_LABEL_IPV4_EXPLICIT_NULL) && + (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4_EXPLICIT_NULL], rt0); rt0 = NULL; } diff --git a/net/mpls/internal.h b/net/mpls/internal.h index 693877d..b064c34 100644 --- a/net/mpls/internal.h +++ b/net/mpls/internal.h @@ -1,16 +1,6 @@ #ifndef MPLS_INTERNAL_H #define MPLS_INTERNAL_H -#define LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ -#define LABEL_ROUTER_ALERT_LABEL 1 /* RFC3032 */ -#define LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ -#define LABEL_IMPLICIT_NULL 3 /* RFC3032 */ -#define LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ -#define LABEL_GAL 13 /* RFC5586 */ -#define LABEL_OAM_ALERT 14 /* RFC3429 */ -#define LABEL_EXTENSION 15 /* RFC7274 */ - - struct mpls_shim_hdr { __be32 label_stack_entry; }; -- cgit v0.10.2 From 31ccd0e66d41f73cfc21a8de976e713455205228 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Apr 2015 16:20:58 -0700 Subject: tcp_westwood: fix tcp_westwood_info() I forgot to update tcp_westwood when changing get_info() behavior, this patch should fix this. Fixes: 64f40ff5bbdb ("tcp: prepare CC get_info() access from getsockopt()") Reported-by: kbuild test robot Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c index b3c57cc..c10732e 100644 --- a/net/ipv4/tcp_westwood.c +++ b/net/ipv4/tcp_westwood.c @@ -256,18 +256,19 @@ static void tcp_westwood_event(struct sock *sk, enum tcp_ca_event event) } /* Extract info for Tcp socket info provided via netlink. */ -static int tcp_westwood_info(struct sock *sk, u32 ext, struct sk_buff *skb) +static size_t tcp_westwood_info(struct sock *sk, u32 ext, int *attr, + union tcp_cc_info *info) { const struct westwood *ca = inet_csk_ca(sk); if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) { - struct tcpvegas_info info = { - .tcpv_enabled = 1, - .tcpv_rtt = jiffies_to_usecs(ca->rtt), - .tcpv_minrtt = jiffies_to_usecs(ca->rtt_min), - }; + info->vegas.tcpv_enabled = 1; + info->vegas.tcpv_rttcnt = 0; + info->vegas.tcpv_rtt = jiffies_to_usecs(ca->rtt), + info->vegas.tcpv_minrtt = jiffies_to_usecs(ca->rtt_min), - return nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); + *attr = INET_DIAG_VEGASINFO; + return sizeof(struct tcpvegas_info); } return 0; } -- cgit v0.10.2 From 99ebbd30e3640f6addb37f222b4d6ad4b807d9ea Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 5 May 2015 16:23:25 -0700 Subject: revert "zram: move compact_store() to sysfs functions area" Revert commit c72c6160d967ed26a0b136dbab337f821d233509 It was intended to be a cosmetic change that w/o any functional change and was part of a bigger change: http://lkml.iu.edu/hypermail/linux/kernel/1503.1/01818.html Sergey Senozhatsky Cc: Linus Torvalds Cc: Minchan Kim Cc: Nitin Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index c94386a..8dcbced 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev) return (struct zram *)dev_to_disk(dev)->private_data; } +static ssize_t compact_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + unsigned long nr_migrated; + struct zram *zram = dev_to_zram(dev); + struct zram_meta *meta; + + down_read(&zram->init_lock); + if (!init_done(zram)) { + up_read(&zram->init_lock); + return -EINVAL; + } + + meta = zram->meta; + nr_migrated = zs_compact(meta->mem_pool); + atomic64_add(nr_migrated, &zram->stats.num_migrated); + up_read(&zram->init_lock); + + return len; +} + static ssize_t disksize_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = { .owner = THIS_MODULE }; +static DEVICE_ATTR_WO(compact); static DEVICE_ATTR_RW(disksize); static DEVICE_ATTR_RO(initstate); static DEVICE_ATTR_WO(reset); @@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = { &dev_attr_num_writes.attr, &dev_attr_failed_reads.attr, &dev_attr_failed_writes.attr, + &dev_attr_compact.attr, &dev_attr_invalid_io.attr, &dev_attr_notify_free.attr, &dev_attr_zero_pages.attr, -- cgit v0.10.2 From 74f3037c4015f3a440dc4cb4e31477875fa9791c Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 5 May 2015 16:23:28 -0700 Subject: zram: add Designated Reviewer for zram in MAINTAINERS Sergey Senozhatsky has contributed/reviewed to zram for a long time. He is really helpful for maintaining zram so I want for him to continue helping me as Designated Reviewer unless he hates it. Signed-off-by: Minchan Kim Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 781e099..1c7fd3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11037,6 +11037,7 @@ F: drivers/media/pci/zoran/ ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER M: Minchan Kim M: Nitin Gupta +R: Sergey Senozhatsky L: linux-kernel@vger.kernel.org S: Maintained F: drivers/block/zram/ -- cgit v0.10.2 From 48b945a19cf6e7e548b2ce545ec88f93284ab276 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 5 May 2015 16:23:30 -0700 Subject: MAINTAINERS: add co-maintainer for LED subsystem Add myself (Jacek Anaszewski) as a co-maintainer for the LED subsystem. Signed-off-by: Jacek Anaszewski Acked-by: Bryan Wu Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 1c7fd3c..b399b34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5805,6 +5805,7 @@ F: drivers/scsi/53c700* LED SUBSYSTEM M: Bryan Wu M: Richard Purdie +M: Jacek Anaszewski L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git S: Maintained -- cgit v0.10.2 From 7d616e4ddb9c0754ed6245a43332d5b867e4db11 Mon Sep 17 00:00:00 2001 From: Yury Norov Date: Tue, 5 May 2015 16:23:33 -0700 Subject: lib: delete lib/find_last_bit.c The file lib/find_last_bit.c was no longer used and supposed to be deleted by commit 8f6f19dd51 ("lib: move find_last_bit to lib/find_next_bit.c") but that delete didn't happen. This gets rid of it. Signed-off-by: Yury Norov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/find_last_bit.c b/lib/find_last_bit.c deleted file mode 100644 index 3e3be40..0000000 --- a/lib/find_last_bit.c +++ /dev/null @@ -1,41 +0,0 @@ -/* find_last_bit.c: fallback find next bit implementation - * - * Copyright (C) 2008 IBM Corporation - * Written by Rusty Russell - * (Inspired by David Howell's find_next_bit implementation) - * - * Rewritten by Yury Norov to decrease - * size and improve performance, 2015. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#ifndef find_last_bit - -unsigned long find_last_bit(const unsigned long *addr, unsigned long size) -{ - if (size) { - unsigned long val = BITMAP_LAST_WORD_MASK(size); - unsigned long idx = (size-1) / BITS_PER_LONG; - - do { - val &= addr[idx]; - if (val) - return idx * BITS_PER_LONG + __fls(val); - - val = ~0ul; - } while (idx--); - } - return size; -} -EXPORT_SYMBOL(find_last_bit); - -#endif -- cgit v0.10.2 From 09789e5de18e4e442870b2d700831f5cb802eb05 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:35 -0700 Subject: mm/memory-failure: call shake_page() when error hits thp tail page Currently memory_failure() calls shake_page() to sweep pages out from pcplists only when the victim page is 4kB LRU page or thp head page. But we should do this for a thp tail page too. Consider that a memory error hits a thp tail page whose head page is on a pcplist when memory_failure() runs. Then, the current kernel skips shake_pages() part, so hwpoison_user_mappings() returns without calling split_huge_page() nor try_to_unmap() because PageLRU of the thp head is still cleared due to the skip of shake_page(). As a result, me_huge_page() runs for the thp, which is broken behavior. One effect is a leak of the thp. And another is to fail to isolate the memory error, so later access to the error address causes another MCE, which kills the processes which used the thp. This patch fixes this problem by calling shake_page() for thp tail case. Fixes: 385de35722c9 ("thp: allow a hwpoisoned head page to be put back to LRU") Signed-off-by: Naoya Horiguchi Reviewed-by: Andi Kleen Acked-by: Dean Nelson Cc: Andrea Arcangeli Cc: Hidetoshi Seto Cc: Jin Dongming Cc: [3.4+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory-failure.c b/mm/memory-failure.c index d9359b7..22e0f27 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1187,10 +1187,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) * The check (unnecessarily) ignores LRU pages being isolated and * walked by the page reclaim code, however that's not a big loss. */ - if (!PageHuge(p) && !PageTransTail(p)) { - if (!PageLRU(p)) - shake_page(p, 0); - if (!PageLRU(p)) { + if (!PageHuge(p)) { + if (!PageLRU(hpage)) + shake_page(hpage, 0); + if (!PageLRU(hpage)) { /* * shake_page could have turned it free. */ -- cgit v0.10.2 From 01e76903f655a4d88c2e09d3182436c65f6e1213 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 5 May 2015 16:23:38 -0700 Subject: kasan: show gcc version requirements in Kconfig and Documentation The documentation shows a need for gcc > 4.9.2, but it's really >=. The Kconfig entries don't show require versions so add them. Correct a latter/later typo too. Also mention that gcc 5 required to catch out of bounds accesses to global and stack variables. Signed-off-by: Joe Perches Signed-off-by: Andrey Ryabinin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt index 092fc10..4692241 100644 --- a/Documentation/kasan.txt +++ b/Documentation/kasan.txt @@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds bugs. KASan uses compile-time instrumentation for checking every memory access, -therefore you will need a certain version of GCC > 4.9.2 +therefore you will need a gcc version of 4.9.2 or later. KASan could detect out +of bounds accesses to stack or global variables, but only if gcc 5.0 or later was +used to built the kernel. Currently KASan is supported only for x86_64 architecture and requires that the kernel be built with the SLUB allocator. @@ -23,8 +25,8 @@ To enable KASAN configure kernel with: and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline is compiler instrumentation types. The former produces smaller binary the -latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or -latter. +latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version +of 5.0 or later. Currently KASAN works only with the SLUB memory allocator. For better bug detection and nicer report, enable CONFIG_STACKTRACE and put diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 4fecaedc..777eda7 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -10,8 +10,11 @@ config KASAN help Enables kernel address sanitizer - runtime memory debugger, designed to find out-of-bounds accesses and use-after-free bugs. - This is strictly debugging feature. It consumes about 1/8 - of available memory and brings about ~x3 performance slowdown. + This is strictly a debugging feature and it requires a gcc version + of 4.9.2 or later. Detection of out of bounds accesses to stack or + global variables requires gcc 5.0 or later. + This feature consumes about 1/8 of available memory and brings about + ~x3 performance slowdown. For better error detection enable CONFIG_STACKTRACE, and add slub_debug=U to boot cmdline. @@ -40,6 +43,7 @@ config KASAN_INLINE memory accesses. This is faster than outline (in some workloads it gives about x2 boost over outline instrumentation), but make kernel's .text size much bigger. + This requires a gcc version of 5.0 or later. endchoice -- cgit v0.10.2 From c71f1e05e62f3eb843b6458eeb7298f269b34b1e Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 5 May 2015 16:23:41 -0700 Subject: Documentation: bindings: add abracon,abx80x Document the bindings for abracon,abx80x and related compatibles. Signed-off-by: Alexandre Belloni Cc: Philippe De Muyter Cc: Alessandro Zummo Cc: Arnd Bergmann Cc: Paul Bolle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt new file mode 100644 index 0000000..be78968 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -0,0 +1,30 @@ +Abracon ABX80X I2C ultra low power RTC/Alarm chip + +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 +is the superset of ab180x. + +Required properties: + + - "compatible": should one of: + "abracon,abx80x" + "abracon,ab0801" + "abracon,ab0803" + "abracon,ab0804" + "abracon,ab0805" + "abracon,ab1801" + "abracon,ab1803" + "abracon,ab1804" + "abracon,ab1805" + Using "abracon,abx80x" will enable chip autodetection. + - "reg": I2C bus address of the device + +Optional properties: + +The abx804 and abx805 have a trickle charger that is able to charge the +connected battery or supercap. Both the following properties have to be defined +and valid to enable charging: + + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output + resistor, the other values are in ohm. -- cgit v0.10.2 From 4d61ff6b9960cb00cf2c12abd5769aa2dd475415 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Tue, 5 May 2015 16:23:44 -0700 Subject: rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter Cc: Alessandro Zummo Signed-off-by: Alexandre Belloni Signed-off-by: Arnd Bergmann Cc: Paul Bolle Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6149ae0..0fe4ad8 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -164,6 +164,16 @@ config RTC_DRV_ABB5ZES3 This driver can also be built as a module. If so, the module will be called rtc-ab-b5ze-s3. +config RTC_DRV_ABX80X + tristate "Abracon ABx80x" + help + If you say yes here you get support for Abracon AB080X and AB180X + families of ultra-low-power battery- and capacitor-backed real-time + clock chips. + + This driver can also be built as a module. If so, the module + will be called rtc-abx80x. + config RTC_DRV_AS3722 tristate "ams AS3722 RTC driver" depends on MFD_AS3722 diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index c31731c..2b82e2b 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o +obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c new file mode 100644 index 0000000..4337c3b --- /dev/null +++ b/drivers/rtc/rtc-abx80x.c @@ -0,0 +1,307 @@ +/* + * A driver for the I2C members of the Abracon AB x8xx RTC family, + * and compatible: AB 1805 and AB 0805 + * + * Copyright 2014-2015 Macq S.A. + * + * Author: Philippe De Muyter + * Author: Alexandre Belloni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#define ABX8XX_REG_HTH 0x00 +#define ABX8XX_REG_SC 0x01 +#define ABX8XX_REG_MN 0x02 +#define ABX8XX_REG_HR 0x03 +#define ABX8XX_REG_DA 0x04 +#define ABX8XX_REG_MO 0x05 +#define ABX8XX_REG_YR 0x06 +#define ABX8XX_REG_WD 0x07 + +#define ABX8XX_REG_CTRL1 0x10 +#define ABX8XX_CTRL_WRITE BIT(1) +#define ABX8XX_CTRL_12_24 BIT(6) + +#define ABX8XX_REG_CFG_KEY 0x1f +#define ABX8XX_CFG_KEY_MISC 0x9d + +#define ABX8XX_REG_ID0 0x28 + +#define ABX8XX_REG_TRICKLE 0x20 +#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0 +#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8 +#define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4 + +static u8 trickle_resistors[] = {0, 3, 6, 11}; + +enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, + AB1801, AB1803, AB1804, AB1805, ABX80X}; + +struct abx80x_cap { + u16 pn; + bool has_tc; +}; + +static struct abx80x_cap abx80x_caps[] = { + [AB0801] = {.pn = 0x0801}, + [AB0803] = {.pn = 0x0803}, + [AB0804] = {.pn = 0x0804, .has_tc = true}, + [AB0805] = {.pn = 0x0805, .has_tc = true}, + [AB1801] = {.pn = 0x1801}, + [AB1803] = {.pn = 0x1803}, + [AB1804] = {.pn = 0x1804, .has_tc = true}, + [AB1805] = {.pn = 0x1805, .has_tc = true}, + [ABX80X] = {.pn = 0} +}; + +static struct i2c_driver abx80x_driver; + +static int abx80x_enable_trickle_charger(struct i2c_client *client, + u8 trickle_cfg) +{ + int err; + + /* + * Write the configuration key register to enable access to the Trickle + * register + */ + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, + ABX8XX_CFG_KEY_MISC); + if (err < 0) { + dev_err(&client->dev, "Unable to write configuration key\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE, + ABX8XX_TRICKLE_CHARGE_ENABLE | + trickle_cfg); + if (err < 0) { + dev_err(&client->dev, "Unable to write trickle register\n"); + return -EIO; + } + + return 0; +} + +static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F); + tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7; + tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F); + tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1; + tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100; + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + if (tm->tm_year < 100) + return -EINVAL; + + buf[ABX8XX_REG_HTH] = 0; + buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec); + buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min); + buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour); + buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday); + buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1); + buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100); + buf[ABX8XX_REG_WD] = tm->tm_wday; + + err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + return 0; +} + +static const struct rtc_class_ops abx80x_rtc_ops = { + .read_time = abx80x_rtc_read_time, + .set_time = abx80x_rtc_set_time, +}; + +static int abx80x_dt_trickle_cfg(struct device_node *np) +{ + const char *diode; + int trickle_cfg = 0; + int i, ret; + u32 tmp; + + ret = of_property_read_string(np, "abracon,tc-diode", &diode); + if (ret) + return ret; + + if (!strcmp(diode, "standard")) + trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE; + else if (!strcmp(diode, "schottky")) + trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE; + else + return -EINVAL; + + ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp); + if (ret) + return ret; + + for (i = 0; i < sizeof(trickle_resistors); i++) + if (trickle_resistors[i] == tmp) + break; + + if (i == sizeof(trickle_resistors)) + return -EINVAL; + + return (trickle_cfg | i); +} + +static int abx80x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct rtc_device *rtc; + int i, data, err, trickle_cfg = -EINVAL; + char buf[7]; + unsigned int part = id->driver_data; + unsigned int partnumber; + unsigned int majrev, minrev; + unsigned int lot; + unsigned int wafer; + unsigned int uid; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read partnumber\n"); + return -EIO; + } + + partnumber = (buf[0] << 8) | buf[1]; + majrev = buf[2] >> 3; + minrev = buf[2] & 0x7; + lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3]; + uid = ((buf[4] & 0x7f) << 8) | buf[5]; + wafer = (buf[6] & 0x7c) >> 2; + dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n", + partnumber, majrev, minrev, lot, wafer, uid); + + data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1, + ((data & ~ABX8XX_CTRL_12_24) | + ABX8XX_CTRL_WRITE)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* part autodetection */ + if (part == ABX80X) { + for (i = 0; abx80x_caps[i].pn; i++) + if (partnumber == abx80x_caps[i].pn) + break; + if (abx80x_caps[i].pn == 0) { + dev_err(&client->dev, "Unknown part: %04x\n", + partnumber); + return -EINVAL; + } + part = i; + } + + if (partnumber != abx80x_caps[part].pn) { + dev_err(&client->dev, "partnumber mismatch %04x != %04x\n", + partnumber, abx80x_caps[part].pn); + return -EINVAL; + } + + if (np && abx80x_caps[part].has_tc) + trickle_cfg = abx80x_dt_trickle_cfg(np); + + if (trickle_cfg > 0) { + dev_info(&client->dev, "Enabling trickle charger: %02x\n", + trickle_cfg); + abx80x_enable_trickle_charger(client, trickle_cfg); + } + + rtc = devm_rtc_device_register(&client->dev, abx80x_driver.driver.name, + &abx80x_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int abx80x_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id abx80x_id[] = { + { "abx80x", ABX80X }, + { "ab0801", AB0801 }, + { "ab0803", AB0803 }, + { "ab0804", AB0804 }, + { "ab0805", AB0805 }, + { "ab1801", AB1801 }, + { "ab1803", AB1803 }, + { "ab1804", AB1804 }, + { "ab1805", AB1805 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, abx80x_id); + +static struct i2c_driver abx80x_driver = { + .driver = { + .name = "rtc-abx80x", + }, + .probe = abx80x_probe, + .remove = abx80x_remove, + .id_table = abx80x_id, +}; + +module_i2c_driver(abx80x_driver); + +MODULE_AUTHOR("Philippe De Muyter "); +MODULE_AUTHOR("Alexandre Belloni "); +MODULE_DESCRIPTION("Abracon ABX80X RTC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 602498f9aa43d4951eece3fd6ad95a6d0a78d537 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:46 -0700 Subject: mm: soft-offline: fix num_poisoned_pages counting on concurrent events If multiple soft offline events hit one free page/hugepage concurrently, soft_offline_page() can handle the free page/hugepage multiple times, which makes num_poisoned_pages counter increased more than once. This patch fixes this wrong counting by checking TestSetPageHWPoison for normal papes and by checking the return value of dequeue_hwpoisoned_huge_page() for hugepages. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: [3.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 22e0f27..501820c 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1777,12 +1777,12 @@ int soft_offline_page(struct page *page, int flags) } else if (ret == 0) { /* for free pages */ if (PageHuge(page)) { set_page_hwpoison_huge_page(hpage); - dequeue_hwpoisoned_huge_page(hpage); - atomic_long_add(1 << compound_order(hpage), + if (!dequeue_hwpoisoned_huge_page(hpage)) + atomic_long_add(1 << compound_order(hpage), &num_poisoned_pages); } else { - SetPageHWPoison(page); - atomic_long_inc(&num_poisoned_pages); + if (!TestSetPageHWPoison(page)) + atomic_long_inc(&num_poisoned_pages); } } unset_migratetype_isolate(page, MIGRATE_MOVABLE); -- cgit v0.10.2 From 7ea434a4eb49db83d17cc076f2267704c52938ae Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:49 -0700 Subject: mm/hwpoison-inject: fix refcounting in no-injection case Hwpoison injection via debugfs:hwpoison/corrupt-pfn takes a refcount of the target page. But current code doesn't release it if the target page is not supposed to be injected, which results in memory leak. This patch simply adds the refcount releasing code. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: Andrea Arcangeli Cc: Hidetoshi Seto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index 329caf5..2b3f933 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -40,7 +40,7 @@ static int hwpoison_inject(void *data, u64 val) * This implies unable to support non-LRU pages. */ if (!PageLRU(p) && !PageHuge(p)) - return 0; + goto put_out; /* * do a racy check with elevated page count, to make sure PG_hwpoison @@ -52,11 +52,14 @@ static int hwpoison_inject(void *data, u64 val) err = hwpoison_filter(hpage); unlock_page(hpage); if (err) - return 0; + goto put_out; inject: pr_info("Injecting memory failure at pfn %#lx\n", pfn); return memory_failure(pfn, 18, MF_COUNT_INCREASED); +put_out: + put_page(hpage); + return 0; } static int hwpoison_unpoison(void *data, u64 val) -- cgit v0.10.2 From e386eed89c764f102fcc3c0d4c78c65a357f7399 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Tue, 5 May 2015 16:23:52 -0700 Subject: mm/hwpoison-inject: check PageLRU of hpage Hwpoison injector checks PageLRU of the raw target page to find out whether the page is an appropriate target, but current code now filters out thp tail pages, which prevents us from testing for such cases via this interface. So let's check hpage instead of p. Signed-off-by: Naoya Horiguchi Acked-by: Dean Nelson Cc: Andi Kleen Cc: Andrea Arcangeli Cc: Hidetoshi Seto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index 2b3f933..4ca5fe0 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -34,12 +34,12 @@ static int hwpoison_inject(void *data, u64 val) if (!hwpoison_filter_enable) goto inject; - if (!PageLRU(p) && !PageHuge(p)) - shake_page(p, 0); + if (!PageLRU(hpage) && !PageHuge(p)) + shake_page(hpage, 0); /* * This implies unable to support non-LRU pages. */ - if (!PageLRU(p) && !PageHuge(p)) + if (!PageLRU(hpage) && !PageHuge(p)) goto put_out; /* -- cgit v0.10.2 From f5b697700c86d7d01489202bfd37d86665754afd Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 5 May 2015 16:23:54 -0700 Subject: configfs: init configfs module earlier at boot time We need this earlier in the boot process to allow various subsystems to use configfs (e.g Industrial IIO). Also, debugfs is at core_initcall level and configfs should be on the same level from infrastructure point of view. Signed-off-by: Daniel Baluta Suggested-by: Lars-Peter Clausen Reviewed-by: Christoph Hellwig Cc: Al Viro Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index da94e41..5373567 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -173,5 +173,5 @@ MODULE_LICENSE("GPL"); MODULE_VERSION("0.0.2"); MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration."); -module_init(configfs_init); +core_initcall(configfs_init); module_exit(configfs_exit); -- cgit v0.10.2 From 05836c378c7af9527b98a83746f32c7289a5f3c8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 May 2015 16:23:57 -0700 Subject: util_macros.h: have array pointer point to array of constants Using the new find_closest() macro can result in the following sparse warnings. drivers/hwmon/lm85.c:194:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:194:16: expected int *__fc_a drivers/hwmon/lm85.c:194:16: got int static const [toplevel] * drivers/hwmon/lm85.c:210:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:210:16: expected int *__fc_a drivers/hwmon/lm85.c:210:16: got int const *map This is because the array passed to find_closest() will typically be declared as array of constants, but the macro declares a non-constant pointer to it. Signed-off-by: Guenter Roeck Cc: Bartosz Golaszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h index d5f4fb6..f9b2ce5 100644 --- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -5,7 +5,7 @@ ({ \ typeof(as) __fc_i, __fc_as = (as) - 1; \ typeof(x) __fc_x = (x); \ - typeof(*a) *__fc_a = (a); \ + typeof(*a) const *__fc_a = (a); \ for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ __fc_a[__fc_i + 1], 2)) \ -- cgit v0.10.2 From d8fd150fe3935e1692bf57c66691e17409ebb9c1 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 May 2015 16:24:00 -0700 Subject: nilfs2: fix sanity check of btree level in nilfs_btree_root_broken() The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 059f371..919fd5b 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -388,7 +388,7 @@ static int nilfs_btree_root_broken(const struct nilfs_btree_node *node, nchildren = nilfs_btree_node_get_nchildren(node); if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN || - level > NILFS_BTREE_LEVEL_MAX || + level >= NILFS_BTREE_LEVEL_MAX || nchildren < 0 || nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) { pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n", diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index ff3fea3..9abb763 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -460,7 +460,7 @@ struct nilfs_btree_node { /* level */ #define NILFS_BTREE_LEVEL_DATA 0 #define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1) -#define NILFS_BTREE_LEVEL_MAX 14 +#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */ /** * struct nilfs_palloc_group_desc - block group descriptor -- cgit v0.10.2 From b1432a2a35565f538586774a03bf277c27fc267d Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Tue, 5 May 2015 16:24:02 -0700 Subject: ocfs2: dlm: fix race between purge and get lock resource There is a race window in dlm_get_lock_resource(), which may return a lock resource which has been purged. This will cause the process to hang forever in dlmlock() as the ast msg can't be handled due to its lock resource not existing. dlm_get_lock_resource { ... spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { spin_unlock(&dlm->spinlock); >>>>>>>> race window, dlm_run_purge_list() may run and purge the lock resource spin_lock(&tmpres->spinlock); ... spin_unlock(&tmpres->spinlock); } } Signed-off-by: Junxiao Bi Cc: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index a6944b2..fdf4b41 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -757,6 +757,19 @@ lookup: if (tmpres) { spin_unlock(&dlm->spinlock); spin_lock(&tmpres->spinlock); + + /* + * Right after dlm spinlock was released, dlm_thread could have + * purged the lockres. Check if lockres got unhashed. If so + * start over. + */ + if (hlist_unhashed(&tmpres->hash_node)) { + spin_unlock(&tmpres->spinlock); + dlm_lockres_put(tmpres); + tmpres = NULL; + goto lookup; + } + /* Wait on the thread that is mastering the resource */ if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) { __dlm_wait_on_lockres(tmpres); -- cgit v0.10.2 From 489405fe5ed38e65f6f82f131a39c67f3bae6045 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 5 May 2015 16:24:05 -0700 Subject: rtc: armada38x: fix concurrency access in armada38x_rtc_set_time While setting the time, the RTC TIME register should not be accessed. However due to hardware constraints, setting the RTC time involves sleeping during 100ms. This sleep was done outside the critical section protected by the spinlock, so it was possible to read the RTC TIME register and get an incorrect value. This patch introduces a mutex for protecting the RTC TIME access, unlike the spinlock it is allowed to sleep in a critical section protected by a mutex. The RTC STATUS register can still be used from the interrupt handler but it has no effect on setting the time. Signed-off-by: Gregory CLEMENT Acked-by: Alexandre Belloni Acked-by: Andrew Lunn Cc: Alessandro Zummo Cc: [4.0] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c index 43e04af..cb70ced 100644 --- a/drivers/rtc/rtc-armada38x.c +++ b/drivers/rtc/rtc-armada38x.c @@ -40,6 +40,13 @@ struct armada38x_rtc { void __iomem *regs; void __iomem *regs_soc; spinlock_t lock; + /* + * While setting the time, the RTC TIME register should not be + * accessed. Setting the RTC time involves sleeping during + * 100ms, so a mutex instead of a spinlock is used to protect + * it + */ + struct mutex mutex_time; int irq; }; @@ -59,8 +66,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) struct armada38x_rtc *rtc = dev_get_drvdata(dev); unsigned long time, time_check, flags; - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); time = readl(rtc->regs + RTC_TIME); /* * WA for failing time set attempts. As stated in HW ERRATA if @@ -71,7 +77,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) if ((time_check - time) > 1) time_check = readl(rtc->regs + RTC_TIME); - spin_unlock_irqrestore(&rtc->lock, flags); + mutex_unlock(&rtc->mutex_time); rtc_time_to_tm(time_check, tm); @@ -94,19 +100,12 @@ static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) * then wait for 100ms before writing to the time register to be * sure that the data will be taken into account. */ - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); rtc_delayed_write(0, rtc, RTC_STATUS); - - spin_unlock_irqrestore(&rtc->lock, flags); - msleep(100); - - spin_lock_irqsave(&rtc->lock, flags); - rtc_delayed_write(time, rtc, RTC_TIME); + mutex_unlock(&rtc->mutex_time); - spin_unlock_irqrestore(&rtc->lock, flags); out: return ret; } @@ -230,6 +229,7 @@ static __init int armada38x_rtc_probe(struct platform_device *pdev) return -ENOMEM; spin_lock_init(&rtc->lock); + mutex_init(&rtc->mutex_time); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc"); rtc->regs = devm_ioremap_resource(&pdev->dev, res); -- cgit v0.10.2 From 15c5725e6b86cb8dfc4ca655a22005cc678a6f6f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 Apr 2015 21:09:53 +0800 Subject: ipmi: Remove unused including Remove including that don't need it. Signed-off-by: Wei Yongjun Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index ee3b8c5..f6ea4fa 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -31,7 +31,6 @@ * interface into the I2C driver, I believe. */ -#include #if defined(MODVERSIONS) #include #endif -- cgit v0.10.2 From a182a4b2b3e85a559ea2cd3545f4311db41325f2 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 22 Apr 2015 13:25:40 -0500 Subject: ipmi: Report an error if ACPI _IFT doesn't exist When probing an ACPI table, report a specific error, instead of just returning an error, if _IFT doesn't exist. Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 4612741..b5a1b45 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2262,8 +2262,10 @@ static int ipmi_pnp_probe(struct pnp_dev *dev, /* _IFT tells us the interface type: KCS, BT, etc */ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { + dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n"); goto err_free; + } switch (tmp) { case 1: -- cgit v0.10.2 From 9f8127048ab8b47b43f8aeaaec9fec2da44be9a1 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Thu, 23 Apr 2015 11:16:44 +0900 Subject: ipmi: Fix a problem that messages are not issued in run_to_completion mode start_next_msg() issues a message placed in smi_info->waiting_msg if it is non-NULL. However, sender() sets a message to smi_info->curr_msg and NULL to smi_info->waiting_msg in the context of run_to_completion mode. As the result, it leads an infinite loop by waiting the completion of unissued message when leaving dying message after kernel panic. sender() should set the message to smi_info->waiting_msg not curr_msg. Signed-off-by: Hidehiro Kawai Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b5a1b45..8a45e92 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -942,8 +942,7 @@ static void sender(void *send_info, * If we are running to completion, start it and run * transactions until everything is clear. */ - smi_info->curr_msg = msg; - smi_info->waiting_msg = NULL; + smi_info->waiting_msg = msg; /* * Run to completion means we are single-threaded, no -- cgit v0.10.2 From 9162052173d2381e2bbabc224c3c1457acb4c54c Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Fri, 24 Apr 2015 07:46:06 -0500 Subject: ipmi: Add alert handling to SSIF The SSIF interface can optionally have an SMBus alert come in when data is ready. Unfortunately, the IPMI spec gives wiggle room to the implementer to allow them to always have the alert enabled, even if the driver doesn't enable it. So implement alerts. If you don't in this situation, the SMBus alert handling will constantly complain. Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index f6ea4fa..5b82d99 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -165,6 +165,9 @@ enum ssif_stat_indexes { /* Number of watchdog pretimeouts. */ SSIF_STAT_watchdog_pretimeouts, + /* Number of alers received. */ + SSIF_STAT_alerts, + /* Always add statistics before this value, it must be last. */ SSIF_NUM_STATS }; @@ -213,7 +216,16 @@ struct ssif_info { #define WDT_PRE_TIMEOUT_INT 0x08 unsigned char msg_flags; + u8 global_enables; bool has_event_buffer; + bool supports_alert; + + /* + * Used to tell what we should do with alerts. If we are + * waiting on a response, read the data immediately. + */ + bool got_alert; + bool waiting_alert; /* * If set to true, this will request events the next time the @@ -517,14 +529,10 @@ static int ssif_i2c_send(struct ssif_info *ssif_info, static void msg_done_handler(struct ssif_info *ssif_info, int result, unsigned char *data, unsigned int len); -static void retry_timeout(unsigned long data) +static void start_get(struct ssif_info *ssif_info) { - struct ssif_info *ssif_info = (void *) data; int rv; - if (ssif_info->stopping) - return; - ssif_info->rtc_us_timer = 0; rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, @@ -539,6 +547,46 @@ static void retry_timeout(unsigned long data) } } +static void retry_timeout(unsigned long data) +{ + struct ssif_info *ssif_info = (void *) data; + unsigned long oflags, *flags; + bool waiting; + + if (ssif_info->stopping) + return; + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + waiting = ssif_info->waiting_alert; + ssif_info->waiting_alert = false; + ipmi_ssif_unlock_cond(ssif_info, flags); + + if (waiting) + start_get(ssif_info); +} + + +static void ssif_alert(struct i2c_client *client, unsigned int data) +{ + struct ssif_info *ssif_info = i2c_get_clientdata(client); + unsigned long oflags, *flags; + bool do_get = false; + + ssif_inc_stat(ssif_info, alerts); + + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + if (ssif_info->waiting_alert) { + ssif_info->waiting_alert = false; + del_timer(&ssif_info->retry_timer); + do_get = true; + } else if (ssif_info->curr_msg) { + ssif_info->got_alert = true; + } + ipmi_ssif_unlock_cond(ssif_info, flags); + if (do_get) + start_get(ssif_info); +} + static int start_resend(struct ssif_info *ssif_info); static void msg_done_handler(struct ssif_info *ssif_info, int result, @@ -558,9 +606,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, if (ssif_info->retries_left > 0) { ssif_inc_stat(ssif_info, receive_retries); + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + ssif_info->waiting_alert = true; + ssif_info->rtc_us_timer = SSIF_MSG_USEC; mod_timer(&ssif_info->retry_timer, jiffies + SSIF_MSG_JIFFIES); - ssif_info->rtc_us_timer = SSIF_MSG_USEC; + ipmi_ssif_unlock_cond(ssif_info, flags); return; } @@ -649,7 +700,7 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, if (rv < 0) { if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) pr_info(PFX - "Error from i2c_non_blocking_op(2)\n"); + "Error from ssif_i2c_send\n"); result = -EIO; } else @@ -863,15 +914,32 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, msg_done_handler(ssif_info, -EIO, NULL, 0); } } else { + unsigned long oflags, *flags; + bool got_alert; + ssif_inc_stat(ssif_info, sent_messages); ssif_inc_stat(ssif_info, sent_messages_parts); - /* Wait a jiffie then request the next message */ - ssif_info->retries_left = SSIF_RECV_RETRIES; - ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; - mod_timer(&ssif_info->retry_timer, - jiffies + SSIF_MSG_PART_JIFFIES); - return; + flags = ipmi_ssif_lock_cond(ssif_info, &oflags); + got_alert = ssif_info->got_alert; + if (got_alert) { + ssif_info->got_alert = false; + ssif_info->waiting_alert = false; + } + + if (got_alert) { + ipmi_ssif_unlock_cond(ssif_info, flags); + /* The alert already happened, try now. */ + retry_timeout((unsigned long) ssif_info); + } else { + /* Wait a jiffie then request the next message */ + ssif_info->waiting_alert = true; + ssif_info->retries_left = SSIF_RECV_RETRIES; + ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC; + mod_timer(&ssif_info->retry_timer, + jiffies + SSIF_MSG_PART_JIFFIES); + ipmi_ssif_unlock_cond(ssif_info, flags); + } } } @@ -880,6 +948,8 @@ static int start_resend(struct ssif_info *ssif_info) int rv; int command; + ssif_info->got_alert = false; + if (ssif_info->data_len > 32) { command = SSIF_IPMI_MULTI_PART_REQUEST_START; ssif_info->multi_data = ssif_info->data; @@ -1242,6 +1312,8 @@ static int smi_stats_proc_show(struct seq_file *m, void *v) ssif_get_stat(ssif_info, events)); seq_printf(m, "watchdog_pretimeouts: %u\n", ssif_get_stat(ssif_info, watchdog_pretimeouts)); + seq_printf(m, "alerts: %u\n", + ssif_get_stat(ssif_info, alerts)); return 0; } @@ -1324,6 +1396,12 @@ static bool check_acpi(struct ssif_info *ssif_info, struct device *dev) return false; } +/* + * Global enables we care about. + */ +#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \ + IPMI_BMC_EVT_MSG_INTR) + static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) { unsigned char msg[3]; @@ -1454,6 +1532,8 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) goto found; } + ssif_info->global_enables = resp[3]; + if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) { ssif_info->has_event_buffer = true; /* buffer is already enabled, nothing to do. */ @@ -1462,18 +1542,37 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) msg[0] = IPMI_NETFN_APP_REQUEST << 2; msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; - msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF; + msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF; rv = do_cmd(client, 3, msg, &len, resp); if (rv || (len < 2)) { - pr_warn(PFX "Error getting global enables: %d %d %2.2x\n", + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", rv, len, resp[2]); rv = 0; /* Not fatal */ goto found; } - if (resp[2] == 0) + if (resp[2] == 0) { /* A successful return means the event buffer is supported. */ ssif_info->has_event_buffer = true; + ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF; + } + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR; + rv = do_cmd(client, 3, msg, &len, resp); + if (rv || (len < 2)) { + pr_warn(PFX "Error setting global enables: %d %d %2.2x\n", + rv, len, resp[2]); + rv = 0; /* Not fatal */ + goto found; + } + + if (resp[2] == 0) { + /* A successful return means the alert is supported. */ + ssif_info->supports_alert = true; + ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR; + } found: ssif_info->intf_num = atomic_inc_return(&next_intf); @@ -1831,6 +1930,7 @@ static struct i2c_driver ssif_i2c_driver = { }, .probe = ssif_probe, .remove = ssif_remove, + .alert = ssif_alert, .id_table = ssif_id, .detect = ssif_detect }; -- cgit v0.10.2 From 3d69d43baa2749c3d187ce70940d7aebe609e149 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 29 Apr 2015 17:59:21 -0500 Subject: ipmi: Fix multi-part message handling Lots of little fixes for multi-part messages: The values was not being re-initialized, if something went wrong handling a multi-part message and it got left in a bad state, it might be an issue. The commands were not correct when issuing multi-part reads, the code was not passing in the proper value for commands. Also clean up some minor formatting issues. Get the block number from the right location, limit the maximum send message size to 63 bytes and explain why, and fix some minor sylistic issues. Signed-off-by: Corey Minyard diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 5b82d99..207689c 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -489,13 +489,13 @@ static int ipmi_ssif_thread(void *data) if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) { result = i2c_smbus_write_block_data( - ssif_info->client, SSIF_IPMI_REQUEST, + ssif_info->client, ssif_info->i2c_command, ssif_info->i2c_data[0], ssif_info->i2c_data + 1); ssif_info->done_handler(ssif_info, result, NULL, 0); } else { result = i2c_smbus_read_block_data( - ssif_info->client, SSIF_IPMI_RESPONSE, + ssif_info->client, ssif_info->i2c_command, ssif_info->i2c_data); if (result < 0) ssif_info->done_handler(ssif_info, result, @@ -534,6 +534,7 @@ static void start_get(struct ssif_info *ssif_info) int rv; ssif_info->rtc_us_timer = 0; + ssif_info->multi_pos = 0; rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, SSIF_IPMI_RESPONSE, @@ -631,9 +632,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, ssif_inc_stat(ssif_info, received_message_parts); /* Remove the multi-part read marker. */ - for (i = 0; i < (len-2); i++) - ssif_info->data[i] = data[i+2]; len -= 2; + for (i = 0; i < len; i++) + ssif_info->data[i] = data[i+2]; ssif_info->multi_len = len; ssif_info->multi_pos = 1; @@ -660,9 +661,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, goto continue_op; } - blocknum = data[ssif_info->multi_len]; + blocknum = data[0]; - if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) { + if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) { /* Received message too big, abort the operation. */ result = -E2BIG; if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) @@ -672,15 +673,15 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, } /* Remove the blocknum from the data. */ - for (i = 0; i < (len-1); i++) - ssif_info->data[i+ssif_info->multi_len] = data[i+1]; len--; + for (i = 0; i < len; i++) + ssif_info->data[i + ssif_info->multi_len] = data[i + 1]; ssif_info->multi_len += len; if (blocknum == 0xff) { /* End of read */ len = ssif_info->multi_len; data = ssif_info->data; - } else if ((blocknum+1) != ssif_info->multi_pos) { + } else if (blocknum + 1 != ssif_info->multi_pos) { /* * Out of sequence block, just abort. Block * numbers start at zero for the second block, @@ -880,7 +881,11 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, } if (ssif_info->multi_data) { - /* In the middle of a multi-data write. */ + /* + * In the middle of a multi-data write. See the comment + * in the SSIF_MULTI_n_PART case in the probe function + * for details on the intricacies of this. + */ int left; ssif_inc_stat(ssif_info, sent_messages_parts); @@ -984,7 +989,7 @@ static int start_send(struct ssif_info *ssif_info, return -E2BIG; ssif_info->retries_left = SSIF_SEND_RETRIES; - memcpy(ssif_info->data+1, data, len); + memcpy(ssif_info->data + 1, data, len); ssif_info->data_len = len; return start_resend(ssif_info); } @@ -1487,13 +1492,33 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id) break; case SSIF_MULTI_2_PART: - if (ssif_info->max_xmit_msg_size > 64) - ssif_info->max_xmit_msg_size = 64; + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; if (ssif_info->max_recv_msg_size > 62) ssif_info->max_recv_msg_size = 62; break; case SSIF_MULTI_n_PART: + /* + * The specification is rather confusing at + * this point, but I think I understand what + * is meant. At least I have a workable + * solution. With multi-part messages, you + * cannot send a message that is a multiple of + * 32-bytes in length, because the start and + * middle messages are 32-bytes and the end + * message must be at least one byte. You + * can't fudge on an extra byte, that would + * screw up things like fru data writes. So + * we limit the length to 63 bytes. That way + * a 32-byte message gets sent as a single + * part. A larger message will be a 32-byte + * start and the next message is always going + * to be 1-31 bytes in length. Not ideal, but + * it should work. + */ + if (ssif_info->max_xmit_msg_size > 63) + ssif_info->max_xmit_msg_size = 63; break; default: -- cgit v0.10.2 From 9fcb1704d1d51b12e2f03c78bca013d0cbbb7c98 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 5 May 2015 16:32:12 +0300 Subject: drm/i915/dp: there is no audio on port A The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warning. Fix this by not enabling audio on port A, since none of our platforms support audio on port A anyway. v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958 Reported-and-tested-by: Chris Bainbridge Cc: stable@vger.kernel.org Reviewed-by: Sivakumar Thulasimani Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d023710..8d534f4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1348,7 +1348,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, pipe_config->has_dp_encoder = true; pipe_config->has_drrs = false; - pipe_config->has_audio = intel_dp->has_audio; + pipe_config->has_audio = intel_dp->has_audio && port != PORT_A; if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { intel_fixed_panel_mode(intel_connector->panel.fixed_mode, @@ -2211,8 +2211,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder, int dotclock; tmp = I915_READ(intel_dp->output_reg); - if (tmp & DP_AUDIO_OUTPUT_ENABLE) - pipe_config->has_audio = true; + + pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A; if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { if (tmp & DP_SYNC_HS_HIGH) -- cgit v0.10.2 From c88d47480d300eaad80c213d50c9bf6077fc49bc Mon Sep 17 00:00:00 2001 From: Bobby Powers Date: Mon, 27 Apr 2015 08:10:41 -0700 Subject: x86/fpu: Always restore_xinit_state() when use_eager_cpu() The following commit: f893959b0898 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") removed drop_init_fpu() usage from flush_thread(). This seems to break things for me - the Go 1.4 test suite fails all over the place with floating point comparision errors (offending commit found through bisection). The functional change was that flush_thread() after this commit only calls restore_init_xstate() when both use_eager_fpu() and !used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls restore_init_xstate() regardless of whether current used_math() - apply the same logic here. Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed tsk instead of current, like in the rest of flush_thread(). Tested-by: Dave Hansen Signed-off-by: Bobby Powers Signed-off-by: Borislav Petkov Acked-by: Oleg Nesterov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Pekka Riikonen Cc: Quentin Casasnovas Cc: Rik van Riel Cc: Suresh Siddha Cc: Thomas Gleixner Fixes: f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()") Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index bfc99b3..6e338e3 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -156,11 +156,13 @@ void flush_thread(void) /* FPU state will be reallocated lazily at the first use. */ drop_fpu(tsk); free_thread_xstate(tsk); - } else if (!used_math()) { - /* kthread execs. TODO: cleanup this horror. */ - if (WARN_ON(init_fpu(tsk))) - force_sig(SIGKILL, tsk); - user_fpu_begin(); + } else { + if (!tsk_used_math(tsk)) { + /* kthread execs. TODO: cleanup this horror. */ + if (WARN_ON(init_fpu(tsk))) + force_sig(SIGKILL, tsk); + user_fpu_begin(); + } restore_init_xstate(); } } -- cgit v0.10.2 From bad4371d87d1d1ed1aecd9c9cc21c41ac3f289c8 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Thu, 30 Apr 2015 02:03:51 +0900 Subject: mmc: sh_mmcif: Fix timeout value for command request f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by: Takeshi Kihara [horms: rewrote changelog to refer to HZ] Signed-off-by: Simon Horman Signed-off-by: Yoshihiro Kaneko Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 2b6ef6b..7eff087 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1408,7 +1408,7 @@ static int sh_mmcif_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->addr = reg; - host->timeout = msecs_to_jiffies(1000); + host->timeout = msecs_to_jiffies(10000); host->ccs_enable = !pd || !pd->ccs_unsupported; host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present; -- cgit v0.10.2 From 4e93b9a6abc0d028daf3c8a00cb77b679d8a4df4 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Tue, 12 Aug 2014 12:01:30 +0800 Subject: mmc: card: Don't access RPMB partitions for normal read/write During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe224c ("mmc: core: Expose access to RPMB partition") Signed-off-by: Yunpeng Gao Signed-off-by: Chuanxiao Dong Tested-by: Michael Shigorin Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 2c25271..60f7141 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1029,6 +1029,18 @@ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) md->reset_done &= ~type; } +int mmc_access_rpmb(struct mmc_queue *mq) +{ + struct mmc_blk_data *md = mq->data; + /* + * If this is a RPMB partition access, return ture + */ + if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) + return true; + + return false; +} + static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->data; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 236d194..8efa368 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -38,7 +38,7 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) return BLKPREP_KILL; } - if (mq && mmc_card_removed(mq->card)) + if (mq && (mmc_card_removed(mq->card) || mmc_access_rpmb(mq))) return BLKPREP_KILL; req->cmd_flags |= REQ_DONTPREP; diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 5752d50..99e6521 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -73,4 +73,6 @@ extern void mmc_queue_bounce_post(struct mmc_queue_req *); extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *); extern void mmc_packed_clean(struct mmc_queue *); +extern int mmc_access_rpmb(struct mmc_queue *); + #endif -- cgit v0.10.2 From d2d05c65c40e067ca5898399069053f095c67d6f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Apr 2015 16:54:17 -0700 Subject: gpio: omap: Fix regression for MPUIO interrupts At some point with all the GPIO clean-up we've broken the MPUIO interrupts. Those are just a little bit different from the GPIO interrupts, so we can fix it up just by setting different irqchip functions for it. And then we can just remove all old code trying to do the same. Cc: Aaro Koskinen Cc: Javier Martinez Canillas Cc: Kevin Hilman Cc: Nishanth Menon Signed-off-by: Tony Lindgren Reviewed-by: Grygorii Strashko Acked-by: Santosh Shilimkar Reviewed-by: Felipe Balbi Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index cd1d5bf..b232397 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1054,38 +1054,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank) dev_err(bank->dev, "Could not get gpio dbck\n"); } -static void -omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, - unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, - handle_simple_irq); - if (!gc) { - dev_err(bank->dev, "Memory alloc failed for gc\n"); - return; - } - - ct = gc->chip_types; - - /* NOTE: No ack required, reading IRQ status clears it. */ - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = omap_gpio_irq_type; - - if (bank->regs->wkup_en) - ct->chip.irq_set_wake = omap_gpio_wake_enable; - - ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); -} - static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) { - int j; static int gpio; int irq_base = 0; int ret; @@ -1132,6 +1102,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) } #endif + /* MPUIO is a bit different, reading IRQ status clears it */ + if (bank->is_mpuio) { + irqc->irq_ack = dummy_irq_chip.irq_ack; + irqc->irq_mask = irq_gc_mask_set_bit; + irqc->irq_unmask = irq_gc_mask_clr_bit; + if (!bank->regs->wkup_en) + irqc->irq_set_wake = NULL; + } + ret = gpiochip_irqchip_add(&bank->chip, irqc, irq_base, omap_gpio_irq_handler, IRQ_TYPE_NONE); @@ -1145,15 +1124,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc) gpiochip_set_chained_irqchip(&bank->chip, irqc, bank->irq, omap_gpio_irq_handler); - for (j = 0; j < bank->width; j++) { - int irq = irq_find_mapping(bank->chip.irqdomain, j); - if (bank->is_mpuio) { - omap_mpuio_alloc_gc(bank, irq, bank->width); - irq_set_chip_and_handler(irq, NULL, NULL); - set_irq_flags(irq, 0); - } - } - return 0; } -- cgit v0.10.2 From 8746515d7f04c9ea94cf43e2db1fd2cfca93276d Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 24 Apr 2015 10:16:40 +0100 Subject: xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM Make sure that xen_swiotlb_init allocates buffers that are DMA capable when at least one memblock is available below 4G. Otherwise we assume that all devices on the SoC can cope with >4G addresses. We do this on ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case. No functional changes on x86. From: Chen Baozi Signed-off-by: Chen Baozi Signed-off-by: Stefano Stabellini Tested-by: Chen Baozi Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David Vrabel diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 2f7e6ff..0b579b2 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) bool xen_arch_need_swiotlb(struct device *dev, unsigned long pfn, unsigned long mfn); +unsigned long xen_get_swiotlb_free_pages(unsigned int order); #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 793551d..4983250 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -21,6 +22,20 @@ #include #include +unsigned long xen_get_swiotlb_free_pages(unsigned int order) +{ + struct memblock_region *reg; + gfp_t flags = __GFP_NOWARN; + + for_each_memblock(memory, reg) { + if (reg->base < (phys_addr_t)0xffffffff) { + flags |= __GFP_DMA; + break; + } + } + return __get_free_pages(flags, order); +} + enum dma_cache_op { DMA_UNMAP, DMA_MAP, diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 358dcd3..c44a5d5 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev, return false; } +static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order) +{ + return __get_free_pages(__GFP_NOWARN, order); +} + #endif /* _ASM_X86_XEN_PAGE_H */ diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 810ad41..4c54932 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -235,7 +235,7 @@ retry: #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { - xen_io_tlb_start = (void *)__get_free_pages(__GFP_NOWARN, order); + xen_io_tlb_start = (void *)xen_get_swiotlb_free_pages(order); if (xen_io_tlb_start) break; order--; -- cgit v0.10.2 From c5272a28566b00cce79127ad382406e0a8650690 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 1 May 2015 09:01:27 -0700 Subject: pinctrl: Don't just pretend to protect pinctrl_maps, do it for real Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7b pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by: Doug Anderson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 89dca77..18ee208 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1110,7 +1110,7 @@ void devm_pinctrl_put(struct pinctrl *p) EXPORT_SYMBOL_GPL(devm_pinctrl_put); int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, - bool dup, bool locked) + bool dup) { int i, ret; struct pinctrl_maps *maps_node; @@ -1178,11 +1178,9 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, maps_node->maps = maps; } - if (!locked) - mutex_lock(&pinctrl_maps_mutex); + mutex_lock(&pinctrl_maps_mutex); list_add_tail(&maps_node->node, &pinctrl_maps); - if (!locked) - mutex_unlock(&pinctrl_maps_mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } @@ -1197,7 +1195,7 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, int pinctrl_register_mappings(struct pinctrl_map const *maps, unsigned num_maps) { - return pinctrl_register_map(maps, num_maps, true, false); + return pinctrl_register_map(maps, num_maps, true); } void pinctrl_unregister_map(struct pinctrl_map const *map) diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 75476b3..b24ea84 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -183,7 +183,7 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, } int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, - bool dup, bool locked); + bool dup); void pinctrl_unregister_map(struct pinctrl_map const *map); extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev); diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index eda13de..0bbf7d7 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -92,7 +92,7 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename, dt_map->num_maps = num_maps; list_add_tail(&dt_map->node, &p->dt_maps); - return pinctrl_register_map(map, num_maps, false, true); + return pinctrl_register_map(map, num_maps, false); } struct pinctrl_dev *of_pinctrl_get(struct device_node *np) -- cgit v0.10.2 From 0ff28d9f4674d781e492bcff6f32f0fe48cf0fed Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 6 May 2015 17:26:47 +0200 Subject: splice: sendfile() at once fails for big files Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include #include #include #include #include #include #include #include #include int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index 476024b..bfe62ae 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1161,7 +1161,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, long ret, bytes; umode_t i_mode; size_t len; - int i, flags; + int i, flags, more; /* * We require the input being a regular file, as we don't want to @@ -1204,6 +1204,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, * Don't block on output, we have to drain the direct pipe. */ sd->flags &= ~SPLICE_F_NONBLOCK; + more = sd->flags & SPLICE_F_MORE; while (len) { size_t read_len; @@ -1217,6 +1218,15 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, sd->total_len = read_len; /* + * If more data is pending, set SPLICE_F_MORE + * If this is the last data and SPLICE_F_MORE was not set + * initially, clears it. + */ + if (read_len < len) + sd->flags |= SPLICE_F_MORE; + else if (!more) + sd->flags &= ~SPLICE_F_MORE; + /* * NOTE: nonblocking mode only applies to the input. We * must not do the output in nonblocking mode as then we * could get stuck data in the internal pipe: -- cgit v0.10.2 From 1d3c61c2eb3fe4f96d3192212f1bdcee49ea55aa Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 6 May 2015 11:17:01 +0100 Subject: Btrfs: fix wrong mapping flags for free space inode We were passing a flags value that differed from the intention in commit 2b108268006e ("Btrfs: don't use highmem for free space cache pages"). This caused problems in a ARM machine, leaving btrfs unusable there. Reported-by: Merlijn Wajer Tested-by: Merlijn Wajer Signed-off-by: Filipe Manana Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 41c510b..5e020d7 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -86,7 +86,7 @@ static struct inode *__lookup_free_space_inode(struct btrfs_root *root, mapping_set_gfp_mask(inode->i_mapping, mapping_gfp_mask(inode->i_mapping) & - ~(GFP_NOFS & ~__GFP_HIGHMEM)); + ~(__GFP_FS | __GFP_HIGHMEM)); return inode; } -- cgit v0.10.2 From ac01ce1410fc2c7b5f3af5e9c972e6a412eee54f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alex=20Benn=C3=A9e?= Date: Wed, 29 Apr 2015 16:18:46 +0100 Subject: tracing: Make ftrace_print_array_seq compute buf_len MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The only caller to this function (__print_array) was getting it wrong by passing the array length instead of buffer length. As the element size was already being passed for other reasons it seems reasonable to push the calculation of buffer length into the function. Link: http://lkml.kernel.org/r/1430320727-14582-1-git-send-email-alex.bennee@linaro.org Signed-off-by: Alex Bennée Signed-off-by: Steven Rostedt diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 46e83c2..f9ecf63 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -46,7 +46,7 @@ const char *ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int len); const char *ftrace_print_array_seq(struct trace_seq *p, - const void *buf, int buf_len, + const void *buf, int count, size_t el_size); struct trace_iterator; diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 692bf71..25a086b 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -178,12 +178,13 @@ ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) EXPORT_SYMBOL(ftrace_print_hex_seq); const char * -ftrace_print_array_seq(struct trace_seq *p, const void *buf, int buf_len, +ftrace_print_array_seq(struct trace_seq *p, const void *buf, int count, size_t el_size) { const char *ret = trace_seq_buffer_ptr(p); const char *prefix = ""; void *ptr = (void *)buf; + size_t buf_len = count * el_size; trace_seq_putc(p, '{'); -- cgit v0.10.2 From ac02c6ea6b404461829697792cd2b67f6a14d28a Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 4 May 2015 11:00:16 +0200 Subject: crypto: arm64/crc32 - bring in line with generic CRC32 The arm64 CRC32 (not CRC32c) implementation was not quite doing the same thing as the generic one. Fix that. Signed-off-by: Ard Biesheuvel Acked-by: Steve Capper Signed-off-by: Herbert Xu diff --git a/arch/arm64/crypto/crc32-arm64.c b/arch/arm64/crypto/crc32-arm64.c index 9499199..6a37c3c 100644 --- a/arch/arm64/crypto/crc32-arm64.c +++ b/arch/arm64/crypto/crc32-arm64.c @@ -147,13 +147,21 @@ static int chksum_final(struct shash_desc *desc, u8 *out) { struct chksum_desc_ctx *ctx = shash_desc_ctx(desc); + put_unaligned_le32(ctx->crc, out); + return 0; +} + +static int chksumc_final(struct shash_desc *desc, u8 *out) +{ + struct chksum_desc_ctx *ctx = shash_desc_ctx(desc); + put_unaligned_le32(~ctx->crc, out); return 0; } static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out) { - put_unaligned_le32(~crc32_arm64_le_hw(crc, data, len), out); + put_unaligned_le32(crc32_arm64_le_hw(crc, data, len), out); return 0; } @@ -199,6 +207,14 @@ static int crc32_cra_init(struct crypto_tfm *tfm) { struct chksum_ctx *mctx = crypto_tfm_ctx(tfm); + mctx->key = 0; + return 0; +} + +static int crc32c_cra_init(struct crypto_tfm *tfm) +{ + struct chksum_ctx *mctx = crypto_tfm_ctx(tfm); + mctx->key = ~0; return 0; } @@ -229,7 +245,7 @@ static struct shash_alg crc32c_alg = { .setkey = chksum_setkey, .init = chksum_init, .update = chksumc_update, - .final = chksum_final, + .final = chksumc_final, .finup = chksumc_finup, .digest = chksumc_digest, .descsize = sizeof(struct chksum_desc_ctx), @@ -241,7 +257,7 @@ static struct shash_alg crc32c_alg = { .cra_alignmask = 0, .cra_ctxsize = sizeof(struct chksum_ctx), .cra_module = THIS_MODULE, - .cra_init = crc32_cra_init, + .cra_init = crc32c_cra_init, } }; -- cgit v0.10.2 From bf7883ebcb9c0880b8f5d22c1435a3de15283f0a Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 6 May 2015 15:54:31 +0200 Subject: crypto: arm64/sha1-ce - prevent asm code finalization in final() path Ensure that the asm code finalization path is not triggered when invoked via final(), since it already takes care of that itself. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index 114e7cc..aefda98 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -74,6 +74,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, static int sha1_ce_final(struct shash_desc *desc, u8 *out) { + struct sha1_ce_state *sctx = shash_desc_ctx(desc); + + sctx->finalize = 0; kernel_neon_begin_partial(16); sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform); kernel_neon_end(); -- cgit v0.10.2 From ec59a65d694e5fd99d76565b93468c99ae8dff79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 6 May 2015 15:54:32 +0200 Subject: crypto: arm64/sha2-ce - prevent asm code finalization in final() path Ensure that the asm code finalization path is not triggered when invoked via final(), since it already takes care of that itself. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index 1340e44c..7cd5875 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -75,6 +75,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, static int sha256_ce_final(struct shash_desc *desc, u8 *out) { + struct sha256_ce_state *sctx = shash_desc_ctx(desc); + + sctx->finalize = 0; kernel_neon_begin_partial(28); sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform); kernel_neon_end(); -- cgit v0.10.2 From af77b9741300616e7d04264d0ee7ac9f8abb448f Mon Sep 17 00:00:00 2001 From: Sonika Jindal Date: Thu, 7 May 2015 13:59:28 +0530 Subject: drm/i915: Sink rate read should be saved in deca-kHz MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sink rate read from supported link rate table is in KHz as per spec while in drm, the saved clock is in deca-KHz. So divide the link rate by 10 before storing. Reading of rates was added by: commit fc0f8e25318f ("drm/i915/skl: Read sink supported rates from edp panel") Cc: Ville Syrjälä Signed-off-by: Sonika Jindal Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8d534f4..f27346e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3812,7 +3812,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) if (val == 0) break; - intel_dp->sink_rates[i] = val * 200; + /* Value read is in kHz while drm clock is saved in deca-kHz */ + intel_dp->sink_rates[i] = (val * 200) / 10; } intel_dp->num_sink_rates = i; } -- cgit v0.10.2 From c0a06ee185f2b785c7bd44c4fb6fcae80f7d1a54 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:10 +0900 Subject: igb: Fix oops on changing number of rings When changing the number of rings by ethtool -L, q_vectors are reused, which causes oops because of uninitialized pointers. - When an rx is reused as a tx, q_vector->rx.ring is not set to NULL, which misleads igb_poll() to determine that it has an rx ring although it actually points to the tx ring. - When a tx is reused as an rx, q_vector->rx.ring->skb (q_vector->ring[0].skb) has a value that was used as tx_stats before. Fix these problems by zeroing it out on reuseing it. Fixes: 02ef6e1d0b00 ("igb: Fix queue allocation method to accommodate changing during runtime") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 8457d03..783d60ea 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1207,6 +1207,8 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, q_vector = adapter->q_vector[v_idx]; if (!q_vector) q_vector = kzalloc(size, GFP_KERNEL); + else + memset(q_vector, 0, size); if (!q_vector) return -ENOMEM; -- cgit v0.10.2 From 2439fc4d71f71b47c8ace1f42eb46039222282a0 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:11 +0900 Subject: igb: Fix NULL assignment to incorrect variable in igb_reset_q_vector adapter->tx_ring is set to NULL where rx_ring should be. Fixes: 5536d2102a2d ("igb: Combine q_vector and ring allocation into a single function") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 783d60ea..a0a9b1f 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1036,7 +1036,7 @@ static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx) adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; if (q_vector->rx.ring) - adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; + adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; netif_napi_del(&q_vector->napi); -- cgit v0.10.2 From 736a69ca8c99a595a523d2fece66491b89168da6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 7 May 2015 11:16:26 +0100 Subject: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini Since the introduction of BIOS fb preservation, circa 3.17, we began encountering a failure during boot when trying to use force-detect before GEM was initialised. That bug is from commit 7fad798e16fecddd41c6a91728a09f0b9507e40c Author: Daniel Vetter Date: Wed Jul 4 17:51:47 2012 +0200 drm/i915: ensure the force pipe A quirk is actually followed but investigation of the affected machine revealed that it was using a PIPE-A quirk even though it was a 945GSE and the quirk is only supposed to be used to workaround a hardware issue on 830/845. That quirk was added for this HP Mini in commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9 Author: Bryce Harrington Date: Wed May 27 03:40:52 2009 -0700 add pipe a force quirk for Dell mini in order to workaround an issue with the BIOS behaving strangely during lid-close. Since then we have a much larger hammer to thwart the BIOS after opening the lid and the PIPE-A quirk is no longer required. Reported-and-tested-by: Apostolos B. References: https://bugs.freedesktop.org/show_bug.cgi?id=21960 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87521 Signed-off-by: Chris Wilson Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d547d9c8..d0f3cbc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13635,9 +13635,6 @@ static const struct intel_dmi_quirk intel_dmi_quirks[] = { }; static struct intel_quirk intel_quirks[] = { - /* HP Mini needs pipe A force quirk (LP: #322104) */ - { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, - /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, -- cgit v0.10.2 From 1e5ec956a057585adaa1365615c82810b2f5356f Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 14 Apr 2015 14:13:18 +0300 Subject: drm/amdkfd: allow unregister process with queues Sometimes we might unregister process that have queues, because we couldn't preempt the queues. Until now we blocked it with BUG_ON but instead just print it as debug. Reviewed-by: Ben Goz Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 69af73f..7b1d510 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -430,9 +430,10 @@ static int unregister_process_nocpsch(struct device_queue_manager *dqm, BUG_ON(!dqm || !qpd); - BUG_ON(!list_empty(&qpd->queues_list)); + pr_debug("In func %s\n", __func__); - pr_debug("kfd: In func %s\n", __func__); + pr_debug("qpd->queues_list is %s\n", + list_empty(&qpd->queues_list) ? "empty" : "not empty"); retval = 0; mutex_lock(&dqm->lock); -- cgit v0.10.2 From 42e08c78360e58516b6ac8af18a75a494f2967a2 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 5 May 2015 11:15:07 +0300 Subject: drm/amdkfd: Don't report local memory size This patch sets the local memory size that is reported to userspace to 0. This is done to make sure that userspace won't try to allocate local memory for HSA. As long as amdkfd doesn't support allocating local memory for HSA, we need this patch. Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index 661c660..e469c4b 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -728,9 +728,9 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr, sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute", dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz( dev->gpu->kgd)); + sysfs_show_64bit_prop(buffer, "local_mem_size", - dev->gpu->kfd2kgd->get_vmem_size( - dev->gpu->kgd)); + (unsigned long long int) 0); sysfs_show_32bit_prop(buffer, "fw_version", dev->gpu->kfd2kgd->get_fw_version( -- cgit v0.10.2 From 79b066bd76d501cfe8328142153da301f5ca11d1 Mon Sep 17 00:00:00 2001 From: Xihan Zhang Date: Tue, 28 Apr 2015 23:48:40 +0800 Subject: drm/amdkfd: Initialize sdma vm when creating sdma queue This patch fixes a bug where sdma vm wasn't initialized when an sdma queue was created in HWS mode. This caused GPUVM faults to appear on dmesg and it is one of the causes that SDMA queues are not working. Signed-off-by: Xihan Zhang Reviewed-by: Ben Goz Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 7b1d510..596ee5c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -883,6 +883,8 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, return -ENOMEM; } + init_sdma_vm(dqm, q, qpd); + retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj, &q->gart_mqd_addr, &q->properties); if (retval != 0) -- cgit v0.10.2 From db12973cd581d4e79f4aadd0960948f268d15af7 Mon Sep 17 00:00:00 2001 From: "monk.liu" Date: Tue, 5 May 2015 09:24:17 +0200 Subject: drm/radeon: fix userptr BO unpin bug v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixing a memory leak with userptrs. v2: clean up the loop, use an iterator instead v3: remove unused variable Signed-off-by: monk.liu Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index b292aca..edafd3c 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -591,8 +591,7 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm) { struct radeon_device *rdev = radeon_get_rdev(ttm->bdev); struct radeon_ttm_tt *gtt = (void *)ttm; - struct scatterlist *sg; - int i; + struct sg_page_iter sg_iter; int write = !(gtt->userflags & RADEON_GEM_USERPTR_READONLY); enum dma_data_direction direction = write ? @@ -605,9 +604,8 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm) /* free the sg table and pages again */ dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction); - for_each_sg(ttm->sg->sgl, sg, ttm->sg->nents, i) { - struct page *page = sg_page(sg); - + for_each_sg_page(ttm->sg->sgl, &sg_iter, ttm->sg->nents, 0) { + struct page *page = sg_page_iter_page(&sg_iter); if (!(gtt->userflags & RADEON_GEM_USERPTR_READONLY)) set_page_dirty(page); -- cgit v0.10.2 From 247c405098ab731ad9b58971e2cfbab116b54b45 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 5 May 2015 09:52:12 +0200 Subject: drm/radeon: fix userptr lockup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise we can run into a deadlock if we have a fault during binding the BO. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_mn.c b/drivers/gpu/drm/radeon/radeon_mn.c index 535bf40..eef006c 100644 --- a/drivers/gpu/drm/radeon/radeon_mn.c +++ b/drivers/gpu/drm/radeon/radeon_mn.c @@ -142,6 +142,9 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn, list_for_each_entry(bo, &node->bos, mn_list) { + if (!bo->tbo.ttm || bo->tbo.ttm->state != tt_bound) + continue; + r = radeon_bo_reserve(bo, true); if (r) { DRM_ERROR("(%ld) failed to reserve user bo\n", r); -- cgit v0.10.2 From 29c63fe22a17c64e54016040cd882481bd45ee5a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:22 +0200 Subject: drm/radeon: make VCE handle check more strict MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Invalid handles can crash the hw. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c index 24f849f..0de5711 100644 --- a/drivers/gpu/drm/radeon/radeon_vce.c +++ b/drivers/gpu/drm/radeon/radeon_vce.c @@ -493,18 +493,27 @@ int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi, * * @p: parser context * @handle: handle to validate + * @allocated: allocated a new handle? * * Validates the handle and return the found session index or -EINVAL * we we don't have another free session index. */ -int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) +static int radeon_vce_validate_handle(struct radeon_cs_parser *p, + uint32_t handle, bool *allocated) { unsigned i; + *allocated = false; + /* validate the handle */ for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { - if (atomic_read(&p->rdev->vce.handles[i]) == handle) + if (atomic_read(&p->rdev->vce.handles[i]) == handle) { + if (p->rdev->vce.filp[i] != p->filp) { + DRM_ERROR("VCE handle collision detected!\n"); + return -EINVAL; + } return i; + } } /* handle not found try to alloc a new one */ @@ -512,6 +521,7 @@ int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) { p->rdev->vce.filp[i] = p->filp; p->rdev->vce.img_size[i] = 0; + *allocated = true; return i; } } @@ -529,10 +539,10 @@ int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) int radeon_vce_cs_parse(struct radeon_cs_parser *p) { int session_idx = -1; - bool destroyed = false; + bool destroyed = false, created = false, allocated = false; uint32_t tmp, handle = 0; uint32_t *size = &tmp; - int i, r; + int i, r = 0; while (p->idx < p->chunk_ib->length_dw) { uint32_t len = radeon_get_ib_value(p, p->idx); @@ -540,18 +550,21 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) if ((len < 8) || (len & 3)) { DRM_ERROR("invalid VCE command length (%d)!\n", len); - return -EINVAL; + r = -EINVAL; + goto out; } if (destroyed) { DRM_ERROR("No other command allowed after destroy!\n"); - return -EINVAL; + r = -EINVAL; + goto out; } switch (cmd) { case 0x00000001: // session handle = radeon_get_ib_value(p, p->idx + 2); - session_idx = radeon_vce_validate_handle(p, handle); + session_idx = radeon_vce_validate_handle(p, handle, + &allocated); if (session_idx < 0) return session_idx; size = &p->rdev->vce.img_size[session_idx]; @@ -561,6 +574,13 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) break; case 0x01000001: // create + created = true; + if (!allocated) { + DRM_ERROR("Handle already in use!\n"); + r = -EINVAL; + goto out; + } + *size = radeon_get_ib_value(p, p->idx + 8) * radeon_get_ib_value(p, p->idx + 10) * 8 * 3 / 2; @@ -578,12 +598,12 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9, *size); if (r) - return r; + goto out; r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11, *size / 3); if (r) - return r; + goto out; break; case 0x02000001: // destroy @@ -594,7 +614,7 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, *size * 2); if (r) - return r; + goto out; break; case 0x05000004: // video bitstream buffer @@ -602,36 +622,47 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, tmp); if (r) - return r; + goto out; break; case 0x05000005: // feedback buffer r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, 4096); if (r) - return r; + goto out; break; default: DRM_ERROR("invalid VCE command (0x%x)!\n", cmd); - return -EINVAL; + r = -EINVAL; + goto out; } if (session_idx == -1) { DRM_ERROR("no session command at start of IB\n"); - return -EINVAL; + r = -EINVAL; + goto out; } p->idx += len / 4; } - if (destroyed) { - /* IB contains a destroy msg, free the handle */ + if (allocated && !created) { + DRM_ERROR("New session without create command!\n"); + r = -ENOENT; + } + +out: + if ((!r && destroyed) || (r && allocated)) { + /* + * IB contains a destroy msg or we have allocated an + * handle and got an error, anyway free the handle + */ for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) atomic_cmpxchg(&p->rdev->vce.handles[i], handle, 0); } - return 0; + return r; } /** -- cgit v0.10.2 From a1b403da70e038ca6c6c6fe434d1d873546873a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:23 +0200 Subject: drm/radeon: make UVD handle checking more strict MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Invalid messages can crash the hw otherwise. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index c10b2ae..f67a6aa 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -436,50 +436,64 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, return -EINVAL; } - if (msg_type == 1) { + switch (msg_type) { + case 0: + /* it's a create msg, calc image size (width * height) */ + img_size = msg[7] * msg[8]; + radeon_bo_kunmap(bo); + + /* try to alloc a new handle */ + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + if (atomic_read(&p->rdev->uvd.handles[i]) == handle) { + DRM_ERROR("Handle 0x%x already in use!\n", handle); + return -EINVAL; + } + + if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) { + p->rdev->uvd.filp[i] = p->filp; + p->rdev->uvd.img_size[i] = img_size; + return 0; + } + } + + DRM_ERROR("No more free UVD handles!\n"); + return -EINVAL; + + case 1: /* it's a decode msg, calc buffer sizes */ r = radeon_uvd_cs_msg_decode(msg, buf_sizes); - /* calc image size (width * height) */ - img_size = msg[6] * msg[7]; radeon_bo_kunmap(bo); if (r) return r; - } else if (msg_type == 2) { + /* validate the handle */ + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + if (atomic_read(&p->rdev->uvd.handles[i]) == handle) { + if (p->rdev->uvd.filp[i] != p->filp) { + DRM_ERROR("UVD handle collision detected!\n"); + return -EINVAL; + } + return 0; + } + } + + DRM_ERROR("Invalid UVD handle 0x%x!\n", handle); + return -ENOENT; + + case 2: /* it's a destroy msg, free the handle */ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) atomic_cmpxchg(&p->rdev->uvd.handles[i], handle, 0); radeon_bo_kunmap(bo); return 0; - } else { - /* it's a create msg, calc image size (width * height) */ - img_size = msg[7] * msg[8]; - radeon_bo_kunmap(bo); - if (msg_type != 0) { - DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); - return -EINVAL; - } - - /* it's a create msg, no special handling needed */ - } - - /* create or decode, validate the handle */ - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (atomic_read(&p->rdev->uvd.handles[i]) == handle) - return 0; - } + default: - /* handle not found try to alloc a new one */ - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) { - p->rdev->uvd.filp[i] = p->filp; - p->rdev->uvd.img_size[i] = img_size; - return 0; - } + DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); + return -EINVAL; } - DRM_ERROR("No more free UVD handles!\n"); + BUG(); return -EINVAL; } -- cgit v0.10.2 From d52cdfa4a0c6406bbfb33206341eaf1fb1555994 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:24 +0200 Subject: drm/radeon: more strictly validate the UVD codec MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MPEG 2/4 are only supported since UVD3. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index f67a6aa..cd63028 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -396,6 +396,29 @@ static int radeon_uvd_cs_msg_decode(uint32_t *msg, unsigned buf_sizes[]) return 0; } +static int radeon_uvd_validate_codec(struct radeon_cs_parser *p, + unsigned stream_type) +{ + switch (stream_type) { + case 0: /* H264 */ + case 1: /* VC1 */ + /* always supported */ + return 0; + + case 3: /* MPEG2 */ + case 4: /* MPEG4 */ + /* only since UVD 3 */ + if (p->rdev->family >= CHIP_PALM) + return 0; + + /* fall through */ + default: + DRM_ERROR("UVD codec not supported by hardware %d!\n", + stream_type); + return -EINVAL; + } +} + static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, unsigned offset, unsigned buf_sizes[]) { @@ -440,7 +463,11 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, case 0: /* it's a create msg, calc image size (width * height) */ img_size = msg[7] * msg[8]; + + r = radeon_uvd_validate_codec(p, msg[4]); radeon_bo_kunmap(bo); + if (r) + return r; /* try to alloc a new handle */ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { @@ -460,8 +487,10 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, return -EINVAL; case 1: - /* it's a decode msg, calc buffer sizes */ - r = radeon_uvd_cs_msg_decode(msg, buf_sizes); + /* it's a decode msg, validate codec and calc buffer sizes */ + r = radeon_uvd_validate_codec(p, msg[4]); + if (!r) + r = radeon_uvd_cs_msg_decode(msg, buf_sizes); radeon_bo_kunmap(bo); if (r) return r; -- cgit v0.10.2 From 12e49feadff6d7b7ebbe852b36943a71524d8d34 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 7 May 2015 15:19:25 +0200 Subject: drm/radeon: stop trying to suspend UVD sessions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index d2abe48..46eb0fa 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1673,7 +1673,6 @@ struct radeon_uvd { struct radeon_bo *vcpu_bo; void *cpu_addr; uint64_t gpu_addr; - void *saved_bo; atomic_t handles[RADEON_MAX_UVD_HANDLES]; struct drm_file *filp[RADEON_MAX_UVD_HANDLES]; unsigned img_size[RADEON_MAX_UVD_HANDLES]; diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index cd63028..6edcb54 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -204,28 +204,32 @@ void radeon_uvd_fini(struct radeon_device *rdev) int radeon_uvd_suspend(struct radeon_device *rdev) { - unsigned size; - void *ptr; - int i; + int i, r; if (rdev->uvd.vcpu_bo == NULL) return 0; - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) - if (atomic_read(&rdev->uvd.handles[i])) - break; + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { + uint32_t handle = atomic_read(&rdev->uvd.handles[i]); + if (handle != 0) { + struct radeon_fence *fence; - if (i == RADEON_MAX_UVD_HANDLES) - return 0; + radeon_uvd_note_usage(rdev); - size = radeon_bo_size(rdev->uvd.vcpu_bo); - size -= rdev->uvd_fw->size; + r = radeon_uvd_get_destroy_msg(rdev, + R600_RING_TYPE_UVD_INDEX, handle, &fence); + if (r) { + DRM_ERROR("Error destroying UVD (%d)!\n", r); + continue; + } - ptr = rdev->uvd.cpu_addr; - ptr += rdev->uvd_fw->size; + radeon_fence_wait(fence, false); + radeon_fence_unref(&fence); - rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL); - memcpy(rdev->uvd.saved_bo, ptr, size); + rdev->uvd.filp[i] = NULL; + atomic_set(&rdev->uvd.handles[i], 0); + } + } return 0; } @@ -246,12 +250,7 @@ int radeon_uvd_resume(struct radeon_device *rdev) ptr = rdev->uvd.cpu_addr; ptr += rdev->uvd_fw->size; - if (rdev->uvd.saved_bo != NULL) { - memcpy(ptr, rdev->uvd.saved_bo, size); - kfree(rdev->uvd.saved_bo); - rdev->uvd.saved_bo = NULL; - } else - memset(ptr, 0, size); + memset(ptr, 0, size); return 0; } -- cgit v0.10.2 From 454be2af5b49612e7f20ceb6683d5809ce848bee Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 28 Apr 2015 13:09:32 -0400 Subject: drivers: CCI: fix used_mask init in validate_group() Currently in validate_group(), there is a static initializer for fake_pmu.used_mask which is based on CPU_BITS_NONE but the used_mask array size is based on CCI_PMU_MAX_HW_EVENTS. CCI_PMU_MAX_HW_EVENTS is not based on NR_CPUS, so CPU_BITS_NONE is not correct and will cause a build failure if NR_CPUS is set high enough to make CPU_BITS_NONE larger than used_mask. Reviewed-by: Mark Rutland Signed-off-by: Mark Salter Signed-off-by: Arnd Bergmann diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index b854125..5340604 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -660,7 +660,7 @@ validate_group(struct perf_event *event) * Initialise the fake PMU. We only need to populate the * used_mask for the purposes of validation. */ - .used_mask = CPU_BITS_NONE, + .used_mask = { 0 }, }; if (!validate_event(event->pmu, &fake_pmu, leader)) -- cgit v0.10.2 From d68b35f845cc56472fa0d782449ff1549f00ec47 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 29 Apr 2015 11:57:18 +0200 Subject: MAINTAINERS: replace an AT91 maintainer As some help is needed from an active maintainer, replace Andrew Victor by Alexandre Belloni in the ARM/Atmel MAINTAINERS' entry (aka AT91). Add an entry to the CREDITS file. Thanks Andrew for the great role you played during the early days of this product family. Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Acked-by: Alexandre Belloni Signed-off-by: Arnd Bergmann diff --git a/CREDITS b/CREDITS index 40cc4bf..ec7e6c7 100644 --- a/CREDITS +++ b/CREDITS @@ -3709,6 +3709,13 @@ N: Dirk Verworner D: Co-author of German book ``Linux-Kernel-Programmierung'' D: Co-founder of Berlin Linux User Group +N: Andrew Victor +E: linux@maxim.org.za +W: http://maxim.org.za/at91_26.html +D: First maintainer of Atmel ARM-based SoC, aka AT91 +D: Introduced support for at91rm9200, the first chip of AT91 family +S: South Africa + N: Riku Voipio E: riku.voipio@iki.fi D: Author of PCA9532 LED and Fintek f75375s hwmon driver diff --git a/MAINTAINERS b/MAINTAINERS index f639c04..3ab4597 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -892,11 +892,10 @@ S: Maintained F: arch/arm/mach-alpine/ ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES -M: Andrew Victor M: Nicolas Ferre +M: Alexandre Belloni M: Jean-Christophe Plagniol-Villard L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://maxim.org.za/at91_26.html W: http://www.linux4sam.org S: Supported F: arch/arm/mach-at91/ -- cgit v0.10.2 From dc0e3db4ec7c1e73e3283ad39b68eff32b7dc8a1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 May 2015 14:35:49 -0300 Subject: ARM: multi_v7_defconfig: Select more FSL SoCs Select IMX50, IMX6SX and LS1021A SoC support. Signed-off-by: Fabio Estevam Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ab86655..0ca4a3e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y CONFIG_SOC_VF610=y +CONFIG_SOC_LS1021A=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y -- cgit v0.10.2 From 4b2447248325ac7b1654d362c0e9f050f79e0ffe Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Thu, 30 Apr 2015 22:16:28 +0800 Subject: mmc: dw_mmc: init desc in dw_mci_idmac_init Set 0 to des1 in 32bit case. Otherwise the random value of des1 will be used in dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length) Signed-off-by: Fei Wang Signed-off-by: Zhangfei Gao Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 38b2926..69952b2 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -589,9 +589,11 @@ static int dw_mci_idmac_init(struct dw_mci *host) host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); /* Forward link the descriptor list */ - for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) + for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) { p->des3 = cpu_to_le32(host->sg_dma + (sizeof(struct idmac_desc) * (i + 1))); + p->des1 = 0; + } /* Set the last descriptor as the end-of-ring descriptor */ p->des3 = cpu_to_le32(host->sg_dma); -- cgit v0.10.2 From 4de3bf66c61ef708d8f22d7f990339668a858e7d Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Tue, 5 May 2015 16:54:49 +0800 Subject: mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE When non-removable is used for emmc, MMC_CAP_NONREMOVABLE should also be checked, otherwise detection fail since present=0 Signed-off-by: Zhangfei Gao Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 69952b2..5f5adaf 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1302,7 +1302,8 @@ static int dw_mci_get_cd(struct mmc_host *mmc) int gpio_cd = mmc_gpio_get_cd(mmc); /* Use platform get_cd function, else try onboard card detect */ - if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) + if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) || + (mmc->caps & MMC_CAP_NONREMOVABLE)) present = 1; else if (!IS_ERR_VALUE(gpio_cd)) present = gpio_cd; -- cgit v0.10.2 From b6538fe32966e63ef38897860ef220980d904974 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Fri, 8 May 2015 18:19:03 +1000 Subject: md-raid0: conditional mddev->queue access to suit dm-raid This patch is a prerequisite for dm-raid "raid0" support to allow dm-raid to access the MD RAID0 personality doing unconditional accesses to mddev->queue, which is NULL in case of dm-raid stacked on top of MD. Most of the conditional mddev->queue accesses made it to upstream but this missing one, which prohibits md raid0 to set disk stack limits (being done in dm core in case of md underneath dm). Signed-off-by: Heinz Mauelshagen Tested-by: Heinz Mauelshagen Signed-off-by: NeilBrown diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 2cb59a6..6a68ef5 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -188,8 +188,9 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } dev[j] = rdev1; - disk_stack_limits(mddev->gendisk, rdev1->bdev, - rdev1->data_offset << 9); + if (mddev->queue) + disk_stack_limits(mddev->gendisk, rdev1->bdev, + rdev1->data_offset << 9); if (rdev1->bdev->bd_disk->queue->merge_bvec_fn) conf->has_merge_bvec = 1; -- cgit v0.10.2 From f18c1a35f62caccb527e8b0990c8801596e7c662 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:04 +1000 Subject: md/raid5: new alloc_stripe() to allocate an initialize a stripe. The new batch_lock and batch_list fields are being initialized in grow_one_stripe() but not in resize_stripes(). This causes a crash on resize. So separate the core initialization into a new function and call it from both allocation sites. Signed-off-by: NeilBrown Fixes: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 77dfd72..91a1e8b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1971,17 +1971,30 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) put_cpu(); } +static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp) +{ + struct stripe_head *sh; + + sh = kmem_cache_zalloc(sc, gfp); + if (sh) { + spin_lock_init(&sh->stripe_lock); + spin_lock_init(&sh->batch_lock); + INIT_LIST_HEAD(&sh->batch_list); + INIT_LIST_HEAD(&sh->lru); + atomic_set(&sh->count, 1); + } + return sh; +} static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) { struct stripe_head *sh; - sh = kmem_cache_zalloc(conf->slab_cache, gfp); + + sh = alloc_stripe(conf->slab_cache, gfp); if (!sh) return 0; sh->raid_conf = conf; - spin_lock_init(&sh->stripe_lock); - if (grow_buffers(sh, gfp)) { shrink_buffers(sh); kmem_cache_free(conf->slab_cache, sh); @@ -1990,13 +2003,8 @@ static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) sh->hash_lock_index = conf->max_nr_stripes % NR_STRIPE_HASH_LOCKS; /* we just created an active stripe so... */ - atomic_set(&sh->count, 1); atomic_inc(&conf->active_stripes); - INIT_LIST_HEAD(&sh->lru); - spin_lock_init(&sh->batch_lock); - INIT_LIST_HEAD(&sh->batch_list); - sh->batch_head = NULL; release_stripe(sh); conf->max_nr_stripes++; return 1; @@ -2109,13 +2117,11 @@ static int resize_stripes(struct r5conf *conf, int newsize) return -ENOMEM; for (i = conf->max_nr_stripes; i; i--) { - nsh = kmem_cache_zalloc(sc, GFP_KERNEL); + nsh = alloc_stripe(sc, GFP_KERNEL); if (!nsh) break; nsh->raid_conf = conf; - spin_lock_init(&nsh->stripe_lock); - list_add(&nsh->lru, &newstripes); } if (i) { @@ -2142,13 +2148,11 @@ static int resize_stripes(struct r5conf *conf, int newsize) lock_device_hash_lock(conf, hash)); osh = get_free_stripe(conf, hash); unlock_device_hash_lock(conf, hash); - atomic_set(&nsh->count, 1); + for(i=0; ipool_size; i++) { nsh->dev[i].page = osh->dev[i].page; nsh->dev[i].orig_page = osh->dev[i].page; } - for( ; idev[i].page = NULL; nsh->hash_lock_index = hash; kmem_cache_free(conf->slab_cache, osh); cnt++; -- cgit v0.10.2 From b0c783b32318bef29d64086fa812e8c659cb5b37 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:32 +1000 Subject: md/raid5: more incorrect BUG_ON in handle_stripe_fill. It is not incorrect to call handle_stripe_fill() when a batch of full-stripe writes is active. It is, however, a BUG if fetch_block() then decides it needs to actually fetch anything. So move the 'BUG_ON' to where it belongs. Signed-off-by: NeilBrown Fixes: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 91a1e8b..415cac6 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3302,6 +3302,7 @@ static int fetch_block(struct stripe_head *sh, struct stripe_head_state *s, */ BUG_ON(test_bit(R5_Wantcompute, &dev->flags)); BUG_ON(test_bit(R5_Wantread, &dev->flags)); + BUG_ON(sh->batch_head); if ((s->uptodate == disks - 1) && (s->failed && (disk_idx == s->failed_num[0] || disk_idx == s->failed_num[1]))) { @@ -3370,7 +3371,6 @@ static void handle_stripe_fill(struct stripe_head *sh, { int i; - BUG_ON(sh->batch_head); /* look for blocks to read/compute, skip this if a compute * is already in flight, or if the stripe contents are in the * midst of changing due to a write -- cgit v0.10.2 From 10d82c5f0d167ef75a2d8d7d4eed9ee43d3369c9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:33 +1000 Subject: md/raid5: avoid reading parity blocks for full-stripe write to degraded array When performing a reconstruct write, we need to read all blocks that are not being over-written .. except the parity (P and Q) blocks. The code currently reads these (as they are not being over-written!) unnecessarily. Signed-off-by: NeilBrown Fixes: ea664c8245f3 ("md/raid5: need_this_block: tidy/fix last condition.") diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 415cac6..85dc0e6 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3282,7 +3282,9 @@ static int need_this_block(struct stripe_head *sh, struct stripe_head_state *s, /* reconstruct-write isn't being forced */ return 0; for (i = 0; i < s->failed; i++) { - if (!test_bit(R5_UPTODATE, &fdev[i]->flags) && + if (s->failed_num[i] != sh->pd_idx && + s->failed_num[i] != sh->qd_idx && + !test_bit(R5_UPTODATE, &fdev[i]->flags) && !test_bit(R5_OVERWRITE, &fdev[i]->flags)) return 1; } -- cgit v0.10.2 From 6e9eac2dcee5e19f125967dd2be3e36558c42fff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:34 +1000 Subject: md/raid5: don't record new size if resize_stripes fails. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Cc: stable@vger.kernel.org (v2.6.17+) Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 85dc0e6..9748e52 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2216,7 +2216,8 @@ static int resize_stripes(struct r5conf *conf, int newsize) conf->slab_cache = sc; conf->active_name = 1-conf->active_name; - conf->pool_size = newsize; + if (!err) + conf->pool_size = newsize; return err; } -- cgit v0.10.2 From 738a273806ee0568369c9bb19ef3b102f54beef4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:39 +1000 Subject: md/raid5: fix allocation of 'scribble' array. As the new 'scribble' array is sized based on chunk size, we need to make sure the size matches the largest of 'old' and 'new' chunk sizes when the array is undergoing reshape. We also potentially need to resize it even when not resizing the stripe cache, as chunk size can change without changing number of devices. So move the 'resize' code into a separate function, and consider old and new sizes when allocating. Signed-off-by: NeilBrown Fixes: 46d5b785621a ("raid5: use flex_array for scribble data") diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9748e52..3873eaa 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2068,6 +2068,35 @@ static struct flex_array *scribble_alloc(int num, int cnt, gfp_t flags) return ret; } +static int resize_chunks(struct r5conf *conf, int new_disks, int new_sectors) +{ + unsigned long cpu; + int err = 0; + + mddev_suspend(conf->mddev); + get_online_cpus(); + for_each_present_cpu(cpu) { + struct raid5_percpu *percpu; + struct flex_array *scribble; + + percpu = per_cpu_ptr(conf->percpu, cpu); + scribble = scribble_alloc(new_disks, + new_sectors / STRIPE_SECTORS, + GFP_NOIO); + + if (scribble) { + flex_array_free(percpu->scribble); + percpu->scribble = scribble; + } else { + err = -ENOMEM; + break; + } + } + put_online_cpus(); + mddev_resume(conf->mddev); + return err; +} + static int resize_stripes(struct r5conf *conf, int newsize) { /* Make all the stripes able to hold 'newsize' devices. @@ -2096,7 +2125,6 @@ static int resize_stripes(struct r5conf *conf, int newsize) struct stripe_head *osh, *nsh; LIST_HEAD(newstripes); struct disk_info *ndisks; - unsigned long cpu; int err; struct kmem_cache *sc; int i; @@ -2178,25 +2206,6 @@ static int resize_stripes(struct r5conf *conf, int newsize) } else err = -ENOMEM; - get_online_cpus(); - for_each_present_cpu(cpu) { - struct raid5_percpu *percpu; - struct flex_array *scribble; - - percpu = per_cpu_ptr(conf->percpu, cpu); - scribble = scribble_alloc(newsize, conf->chunk_sectors / - STRIPE_SECTORS, GFP_NOIO); - - if (scribble) { - flex_array_free(percpu->scribble); - percpu->scribble = scribble; - } else { - err = -ENOMEM; - break; - } - } - put_online_cpus(); - /* Step 4, return new stripes to service */ while(!list_empty(&newstripes)) { nsh = list_entry(newstripes.next, struct stripe_head, lru); @@ -6228,8 +6237,11 @@ static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu percpu->spare_page = alloc_page(GFP_KERNEL); if (!percpu->scribble) percpu->scribble = scribble_alloc(max(conf->raid_disks, - conf->previous_raid_disks), conf->chunk_sectors / - STRIPE_SECTORS, GFP_KERNEL); + conf->previous_raid_disks), + max(conf->chunk_sectors, + conf->prev_chunk_sectors) + / STRIPE_SECTORS, + GFP_KERNEL); if (!percpu->scribble || (conf->level == 6 && !percpu->spare_page)) { free_scratch_buffer(conf, percpu); @@ -7205,6 +7217,15 @@ static int check_reshape(struct mddev *mddev) if (!check_stripe_cache(mddev)) return -ENOSPC; + if (mddev->new_chunk_sectors > mddev->chunk_sectors || + mddev->delta_disks > 0) + if (resize_chunks(conf, + conf->previous_raid_disks + + max(0, mddev->delta_disks), + max(mddev->new_chunk_sectors, + mddev->chunk_sectors) + ) < 0) + return -ENOMEM; return resize_stripes(conf, (conf->previous_raid_disks + mddev->delta_disks)); } -- cgit v0.10.2 From bb27051f9fd7643f05d8f0babce3337f0b9b3087 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 May 2015 18:19:40 +1000 Subject: md/raid5: fix handling of degraded stripes in batches. There is no need for special handling of stripe-batches when the array is degraded. There may be if there is a failure in the batch, but STRIPE_DEGRADED does not imply an error. So don't set STRIPE_BATCH_ERR in ops_run_io just because the array is degraded. This actually causes a bug: the STRIPE_DEGRADED flag gets cleared in check_break_stripe_batch_list() and so the bitmap bit gets cleared when it shouldn't. So in check_break_stripe_batch_list(), split the batch up completely - again STRIPE_DEGRADED isn't meaningful. Also don't set STRIPE_BATCH_ERR when there is a write error to a replacement device. This simply removes the replacement device and requires no extra handling. Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3873eaa..1ba97fd 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1078,9 +1078,6 @@ again: pr_debug("skip op %ld on disc %d for sector %llu\n", bi->bi_rw, i, (unsigned long long)sh->sector); clear_bit(R5_LOCKED, &sh->dev[i].flags); - if (sh->batch_head) - set_bit(STRIPE_BATCH_ERR, - &sh->batch_head->state); set_bit(STRIPE_HANDLE, &sh->state); } @@ -2448,7 +2445,7 @@ static void raid5_end_write_request(struct bio *bi, int error) } rdev_dec_pending(rdev, conf->mddev); - if (sh->batch_head && !uptodate) + if (sh->batch_head && !uptodate && !replacement) set_bit(STRIPE_BATCH_ERR, &sh->batch_head->state); if (!test_and_clear_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags)) @@ -4214,15 +4211,9 @@ static void check_break_stripe_batch_list(struct stripe_head *sh) return; head_sh = sh; - do { - sh = list_first_entry(&sh->batch_list, - struct stripe_head, batch_list); - BUG_ON(sh == head_sh); - } while (!test_bit(STRIPE_DEGRADED, &sh->state)); - while (sh != head_sh) { - next = list_first_entry(&sh->batch_list, - struct stripe_head, batch_list); + list_for_each_entry_safe(sh, next, &head_sh->batch_list, batch_list) { + list_del_init(&sh->batch_list); set_mask_bits(&sh->state, ~STRIPE_EXPAND_SYNC_FLAG, @@ -4242,8 +4233,6 @@ static void check_break_stripe_batch_list(struct stripe_head *sh) set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); - - sh = next; } } -- cgit v0.10.2 From 3790e395b8f4b66fe4e53629f304505c110a2be7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 4 May 2015 06:29:44 +0200 Subject: drm/tegra: Don't use vblank_disable_immediate on incapable driver. Tegra would not only need a hardware vblank counter that increments at leading edge of vblank, but also support for instantaneous high precision vblank timestamp queries, ie. a proper implementation of dev->driver->get_vblank_timestamp(). Without these, there can be off-by-one errors during vblank disable/enable if the scanout is inside vblank at en/disable time, and additionally clients will never see any useable vblank timestamps when querying via drmWaitVblank ioctl. This would negatively affect swap scheduling under X11 and Wayland. Signed-off-by: Mario Kleiner Acked-by: Thierry Reding Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 1833abd..bfad15a 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -173,7 +173,6 @@ static int tegra_drm_load(struct drm_device *drm, unsigned long flags) drm->irq_enabled = true; /* syncpoints are used for full 32-bit hardware VBLANK counters */ - drm->vblank_disable_immediate = true; drm->max_vblank_count = 0xffffffff; err = drm_vblank_init(drm, drm->mode_config.num_crtc); -- cgit v0.10.2 From efadb751692f3c10e72cf96c8409e40e60852ff2 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 20 Apr 2015 14:13:12 -0500 Subject: MAINTAINERS: socfpga: update the git repo for SoCFPGA The git tree at rocketboards.org is going away. Update the entry to reflect the address of the new location. Also add an entry for all the socfpga_* dts files. Signed-off-by: Dinh Nguyen Signed-off-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index 3ab4597..948b493 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1438,9 +1438,10 @@ ARM/SOCFPGA ARCHITECTURE M: Dinh Nguyen S: Maintained F: arch/arm/mach-socfpga/ +F: arch/arm/boot/dts/socfpga* +F: arch/arm/configs/socfpga_defconfig W: http://www.rocketboards.org -T: git://git.rocketboards.org/linux-socfpga.git -T: git://git.rocketboards.org/linux-socfpga-next.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT M: Dinh Nguyen -- cgit v0.10.2 From c9d862c48c48883a4327ae82f4a6de1eef928d60 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 28 Apr 2015 13:59:43 +0300 Subject: MAINTAINERS: add Conexant Digicolor machines entry This adds Baruch as the maintainer for the Digicolor platform. Signed-off-by: Baruch Siach Signed-off-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index 948b493..9d39c38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -989,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c F: drivers/clocksource/timer-atlas7.c N: [^a-z]sirf +ARM/CONEXANT DIGICOLOR MACHINE SUPPORT +M: Baruch Siach +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +N: digicolor + ARM/EBSA110 MACHINE SUPPORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 0d747762966e47e3660cbd1b7806791c83e04f91 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 9 May 2015 02:33:42 +0900 Subject: ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420 Commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") added a device node for the Exynos5420 DISP1 power domain but dit not make the DP controller a consumer of that power domain. This causes an "Unhandled fault: imprecise external abort" error if the exynos-dp driver tries to access the DP controller registers and the PD was turned off. This lead to a kernel panic and a complete system hang. Make the DP controller device node a consumer of the DISP1 power domain to ensure that the PD is turned on when the exynos-dp driver is probed. Fixes: ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f67b23f..4531753 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -536,6 +536,7 @@ clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; + power-domains = <&disp_pd>; }; mipi_phy: video-phy@10040714 { -- cgit v0.10.2 From ee2020a4ca847e2cde4d5ee73572388061730809 Mon Sep 17 00:00:00 2001 From: Markus Reichl Date: Sat, 9 May 2015 03:05:51 +0900 Subject: ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards The Exynos4412 SoC has a s3c6410 RTC where the source clock is now a mandatory property. This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards. Signed-off-by: Markus Reichl Tested-by: Tobias Jakobi Reviewed-by: Chanwoo Choi Reviewed-by: Javier Martinez Canillas Tested-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 8de12af7..d6b49e5 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -9,6 +9,7 @@ #include #include +#include #include "exynos4412.dtsi" / { @@ -105,6 +106,8 @@ rtc@10070000 { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; g2d@10800000 { -- cgit v0.10.2 From cb0f7c8b40c52124fdb73b5e5a1b28202efbb43b Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 9 May 2015 03:11:21 +0900 Subject: ARM: dts: Fix typo in trip point temperature for exynos5420/5440 Remove the extra zero in the "cpu-crit-0" trip point for exynos5420 and exynos5440. Signed-off-by: Abhilash Kesavan Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi index 5d31fc1..2180a01 100644 --- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -28,7 +28,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1200000>; /* millicelsius */ + temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi index 48adfa8..356e963 100644 --- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -18,7 +18,7 @@ trips { type = "active"; }; cpu-crit-0 { - temperature = <1050000>; /* millicelsius */ + temperature = <105000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; }; -- cgit v0.10.2 From 8cf5e6dc8dd55d0f1ad46ab4046c3a8a51d2136d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 9 May 2015 03:15:16 +0900 Subject: ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow The Marvell mwifiex driver prevents the system to enter into a suspend state if the card power is not preserved during a suspend/resume cycle. So Suspend-to-RAM and Suspend-to-idle are failing on Exynos5250 Snow. Add the keep-power-in-suspend Power Management property to the SDIO/MMC node so the mwifiex suspend handler doesn't fail and the system is able to enter into a suspend state. Signed-off-by: Javier Martinez Canillas Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 2657e84..1eca97e 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -567,6 +567,7 @@ num-slots = <1>; broken-cd; cap-sdio-irq; + keep-power-in-suspend; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; -- cgit v0.10.2 From 766c4cbfacd8634d7580bac6a1b8456e63de3e84 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 7 May 2015 19:24:57 -0400 Subject: namei: d_is_negative() should be checked before ->d_seq validation Fetching ->d_inode, verifying ->d_seq and finding d_is_negative() to be true does *not* mean that inode we'd fetched had been NULL - that holds only while ->d_seq is still unchanged. Shift d_is_negative() checks into lookup_fast() prior to ->d_seq verification. Reported-by: Steven Rostedt Tested-by: Steven Rostedt Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 4a8d998b..f67cf6c 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1415,6 +1415,7 @@ static int lookup_fast(struct nameidata *nd, */ if (nd->flags & LOOKUP_RCU) { unsigned seq; + bool negative; dentry = __d_lookup_rcu(parent, &nd->last, &seq); if (!dentry) goto unlazy; @@ -1424,8 +1425,11 @@ static int lookup_fast(struct nameidata *nd, * the dentry name information from lookup. */ *inode = dentry->d_inode; + negative = d_is_negative(dentry); if (read_seqcount_retry(&dentry->d_seq, seq)) return -ECHILD; + if (negative) + return -ENOENT; /* * This sequence count validates that the parent had no @@ -1472,6 +1476,10 @@ unlazy: goto need_lookup; } + if (unlikely(d_is_negative(dentry))) { + dput(dentry); + return -ENOENT; + } path->mnt = mnt; path->dentry = dentry; err = follow_managed(path, nd->flags); @@ -1583,10 +1591,10 @@ static inline int walk_component(struct nameidata *nd, struct path *path, goto out_err; inode = path->dentry->d_inode; + err = -ENOENT; + if (d_is_negative(path->dentry)) + goto out_path_put; } - err = -ENOENT; - if (d_is_negative(path->dentry)) - goto out_path_put; if (should_follow_link(path->dentry, follow)) { if (nd->flags & LOOKUP_RCU) { @@ -3036,14 +3044,13 @@ retry_lookup: BUG_ON(nd->flags & LOOKUP_RCU); inode = path->dentry->d_inode; -finish_lookup: - /* we _can_ be in RCU mode here */ error = -ENOENT; if (d_is_negative(path->dentry)) { path_to_nameidata(path, nd); goto out; } - +finish_lookup: + /* we _can_ be in RCU mode here */ if (should_follow_link(path->dentry, !symlink_ok)) { if (nd->flags & LOOKUP_RCU) { if (unlikely(nd->path.mnt != path->mnt || -- cgit v0.10.2 From f15133df088ecadd141ea1907f2c96df67c729f0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2015 22:53:15 -0400 Subject: path_openat(): fix double fput() path_openat() jumps to the wrong place after do_tmpfile() - it has already done path_cleanup() (as part of path_lookupat() called by do_tmpfile()), so doing that again can lead to double fput(). Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index f67cf6c..fe30d3b 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -3233,7 +3233,7 @@ static struct file *path_openat(int dfd, struct filename *pathname, if (unlikely(file->f_flags & __O_TMPFILE)) { error = do_tmpfile(dfd, pathname, nd, flags, op, file, &opened); - goto out; + goto out2; } error = path_init(dfd, pathname, flags, nd); @@ -3263,6 +3263,7 @@ static struct file *path_openat(int dfd, struct filename *pathname, } out: path_cleanup(nd); +out2: if (!(opened & FILE_OPENED)) { BUG_ON(!error); put_filp(file); -- cgit v0.10.2 From 7e96c1b0e0f495c5a7450dc4aa7c9a24ba4305bd Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 8 May 2015 16:36:50 -0500 Subject: mnt: Fix fs_fully_visible to verify the root directory is visible This fixes a dumb bug in fs_fully_visible that allows proc or sys to be mounted if there is a bind mount of part of /proc/ or /sys/ visible. Cc: stable@vger.kernel.org Reported-by: Eric Windisch Signed-off-by: "Eric W. Biederman" diff --git a/fs/namespace.c b/fs/namespace.c index 1f4f9da..1b9e111 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -3179,6 +3179,12 @@ bool fs_fully_visible(struct file_system_type *type) if (mnt->mnt.mnt_sb->s_type != type) continue; + /* This mount is not fully visible if it's root directory + * is not the root directory of the filesystem. + */ + if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root) + continue; + /* This mount is not fully visible if there are any child mounts * that cover anything except for empty directories. */ -- cgit v0.10.2 From 1a9f064f516c36d018754407b41921c996439ecf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 9 May 2015 03:39:52 +0930 Subject: m32r: make flush_cpumask non-volatile. We cast away the volatile, but really, why make it volatile at all? We already do a mb() inside the cpumask_empty() loop. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index ce7aea3..c18ddc7 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0; /* * For flush_tlb_others() */ -static volatile cpumask_t flush_cpumask; +static cpumask_t flush_cpumask; static struct mm_struct *flush_mm; static struct vm_area_struct *flush_vma; static volatile unsigned long flush_va; @@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, */ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0); - while (!cpumask_empty((cpumask_t*)&flush_cpumask)) { + while (!cpumask_empty(&flush_cpumask)) { /* nothing. lockup detection does not belong here */ mb(); } @@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void) __flush_tlb_page(va); } } - cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask); + cpumask_clear_cpu(cpu_id, &flush_cpumask); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -- cgit v0.10.2 From e16e888b525503be05b3aea64190e8b3bdef44d0 Mon Sep 17 00:00:00 2001 From: Markus Stenberg Date: Tue, 5 May 2015 13:36:59 +0300 Subject: ipv6: Fixed source specific default route handling. If there are only IPv6 source specific default routes present, the host gets -ENETUNREACH on e.g. connect() because ip6_dst_lookup_tail calls ip6_route_output first, and given source address any, it fails, and ip6_route_get_saddr is never called. The change is to use the ip6_route_get_saddr, even if the initial ip6_route_output fails, and then doing ip6_route_output _again_ after we have appropriate source address available. Note that this is '99% fix' to the problem; a correct fix would be to do route lookups only within addrconf.c when picking a source address, and never call ip6_route_output before source address has been populated. Signed-off-by: Markus Stenberg Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 7fde1f2..c217775 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -886,22 +886,45 @@ static int ip6_dst_lookup_tail(struct sock *sk, #endif int err; - if (!*dst) - *dst = ip6_route_output(net, sk, fl6); - - err = (*dst)->error; - if (err) - goto out_err_release; + /* The correct way to handle this would be to do + * ip6_route_get_saddr, and then ip6_route_output; however, + * the route-specific preferred source forces the + * ip6_route_output call _before_ ip6_route_get_saddr. + * + * In source specific routing (no src=any default route), + * ip6_route_output will fail given src=any saddr, though, so + * that's why we try it again later. + */ + if (ipv6_addr_any(&fl6->saddr) && (!*dst || !(*dst)->error)) { + struct rt6_info *rt; + bool had_dst = *dst != NULL; - if (ipv6_addr_any(&fl6->saddr)) { - struct rt6_info *rt = (struct rt6_info *) *dst; + if (!had_dst) + *dst = ip6_route_output(net, sk, fl6); + rt = (*dst)->error ? NULL : (struct rt6_info *)*dst; err = ip6_route_get_saddr(net, rt, &fl6->daddr, sk ? inet6_sk(sk)->srcprefs : 0, &fl6->saddr); if (err) goto out_err_release; + + /* If we had an erroneous initial result, pretend it + * never existed and let the SA-enabled version take + * over. + */ + if (!had_dst && (*dst)->error) { + dst_release(*dst); + *dst = NULL; + } } + if (!*dst) + *dst = ip6_route_output(net, sk, fl6); + + err = (*dst)->error; + if (err) + goto out_err_release; + #ifdef CONFIG_IPV6_OPTIMISTIC_DAD /* * Here if the dst entry we've looked up diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 5c48293..d358888 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2245,9 +2245,10 @@ int ip6_route_get_saddr(struct net *net, unsigned int prefs, struct in6_addr *saddr) { - struct inet6_dev *idev = ip6_dst_idev((struct dst_entry *)rt); + struct inet6_dev *idev = + rt ? ip6_dst_idev((struct dst_entry *)rt) : NULL; int err = 0; - if (rt->rt6i_prefsrc.plen) + if (rt && rt->rt6i_prefsrc.plen) *saddr = rt->rt6i_prefsrc.addr; else err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL, -- cgit v0.10.2 From f711a6ae062caeee46067b2f2f12ffda319ae73c Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Tue, 5 May 2015 15:20:51 -0400 Subject: net/rds: RDS-TCP: Always create a new rds_sock for an incoming connection. When running RDS over TCP, the active (client) side connects to the listening ("passive") side at the RDS_TCP_PORT. After the connection is established, if the client side reboots (potentially without even sending a FIN) the server still has a TCP socket in the esablished state. If the server-side now gets a new SYN comes from the client with a different client port, TCP will create a new socket-pair, but the RDS layer will incorrectly pull up the old rds_connection (which is still associated with the stale t_sock and RDS socket state). This patch corrects this behavior by having rds_tcp_accept_one() always create a new connection for an incoming TCP SYN. The rds and tcp state associated with the old socket-pair is cleaned up via the rds_tcp_state_change() callback which would typically be invoked in most cases when the client-TCP sends a FIN on TCP restart, triggering a transition to CLOSE_WAIT state. In the rarer event of client death without a FIN, TCP_KEEPALIVE probes on the socket will detect the stale socket, and the TCP transition to CLOSE state will trigger the RDS state cleanup. Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller diff --git a/net/rds/connection.c b/net/rds/connection.c index 14f04139..60f0cd6 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -126,7 +126,10 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr, struct rds_transport *loop_trans; unsigned long flags; int ret; + struct rds_transport *otrans = trans; + if (!is_outgoing && otrans->t_type == RDS_TRANS_TCP) + goto new_conn; rcu_read_lock(); conn = rds_conn_lookup(head, laddr, faddr, trans); if (conn && conn->c_loopback && conn->c_trans != &rds_loop_transport && @@ -142,6 +145,7 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr, if (conn) goto out; +new_conn: conn = kmem_cache_zalloc(rds_conn_slab, gfp); if (!conn) { conn = ERR_PTR(-ENOMEM); diff --git a/net/rds/tcp_connect.c b/net/rds/tcp_connect.c index f9f564a..973109c7 100644 --- a/net/rds/tcp_connect.c +++ b/net/rds/tcp_connect.c @@ -62,6 +62,7 @@ void rds_tcp_state_change(struct sock *sk) case TCP_ESTABLISHED: rds_connect_complete(conn); break; + case TCP_CLOSE_WAIT: case TCP_CLOSE: rds_conn_drop(conn); default: diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 23ab4dcd..0da49e3 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -45,12 +45,45 @@ static void rds_tcp_accept_worker(struct work_struct *work); static DECLARE_WORK(rds_tcp_listen_work, rds_tcp_accept_worker); static struct socket *rds_tcp_listen_sock; +static int rds_tcp_keepalive(struct socket *sock) +{ + /* values below based on xs_udp_default_timeout */ + int keepidle = 5; /* send a probe 'keepidle' secs after last data */ + int keepcnt = 5; /* number of unack'ed probes before declaring dead */ + int keepalive = 1; + int ret = 0; + + ret = kernel_setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, + (char *)&keepalive, sizeof(keepalive)); + if (ret < 0) + goto bail; + + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPCNT, + (char *)&keepcnt, sizeof(keepcnt)); + if (ret < 0) + goto bail; + + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPIDLE, + (char *)&keepidle, sizeof(keepidle)); + if (ret < 0) + goto bail; + + /* KEEPINTVL is the interval between successive probes. We follow + * the model in xs_tcp_finish_connecting() and re-use keepidle. + */ + ret = kernel_setsockopt(sock, IPPROTO_TCP, TCP_KEEPINTVL, + (char *)&keepidle, sizeof(keepidle)); +bail: + return ret; +} + static int rds_tcp_accept_one(struct socket *sock) { struct socket *new_sock = NULL; struct rds_connection *conn; int ret; struct inet_sock *inet; + struct rds_tcp_connection *rs_tcp; ret = sock_create_lite(sock->sk->sk_family, sock->sk->sk_type, sock->sk->sk_protocol, &new_sock); @@ -63,6 +96,10 @@ static int rds_tcp_accept_one(struct socket *sock) if (ret < 0) goto out; + ret = rds_tcp_keepalive(new_sock); + if (ret < 0) + goto out; + rds_tcp_tune(new_sock); inet = inet_sk(new_sock->sk); @@ -77,6 +114,15 @@ static int rds_tcp_accept_one(struct socket *sock) ret = PTR_ERR(conn); goto out; } + /* An incoming SYN request came in, and TCP just accepted it. + * We always create a new conn for listen side of TCP, and do not + * add it to the c_hash_list. + * + * If the client reboots, this conn will need to be cleaned up. + * rds_tcp_state_change() will do that cleanup + */ + rs_tcp = (struct rds_tcp_connection *)conn->c_transport_data; + WARN_ON(!rs_tcp || rs_tcp->t_sock); /* * see the comment above rds_queue_delayed_reconnect() -- cgit v0.10.2 From c82ac7e69efe6dbe370d6ba84e2666d7692ef1c2 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Tue, 5 May 2015 15:20:52 -0400 Subject: net/rds: RDS-TCP: only initiate reconnect attempt on outgoing TCP socket. When the peer of an RDS-TCP connection restarts, a reconnect attempt should only be made from the active side of the TCP connection, i.e. the side that has a transient TCP port number. Do not add the passive side of the TCP connection to the c_hash_node and thus avoid triggering rds_queue_reconnect() for passive rds connections. Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller diff --git a/net/rds/connection.c b/net/rds/connection.c index 60f0cd6..da6da57 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -234,13 +234,22 @@ new_conn: /* Creating normal conn */ struct rds_connection *found; - found = rds_conn_lookup(head, laddr, faddr, trans); + if (!is_outgoing && otrans->t_type == RDS_TRANS_TCP) + found = NULL; + else + found = rds_conn_lookup(head, laddr, faddr, trans); if (found) { trans->conn_free(conn->c_transport_data); kmem_cache_free(rds_conn_slab, conn); conn = found; } else { - hlist_add_head_rcu(&conn->c_hash_node, head); + if ((is_outgoing && otrans->t_type == RDS_TRANS_TCP) || + (otrans->t_type != RDS_TRANS_TCP)) { + /* Only the active side should be added to + * reconnect list for TCP. + */ + hlist_add_head_rcu(&conn->c_hash_node, head); + } rds_cong_add_conn(conn); rds_conn_count++; } -- cgit v0.10.2 From bfbb92c446700da645e4834fb01439097846ce1e Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Tue, 5 May 2015 15:00:25 -0500 Subject: net: macb: Handle the RXUBR interrupt on all devices The same hardware issue the at91 must work around applies to at least the Zynq ethernet, and possibly more devices. The driver also needs to handle the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway. Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 4104d49..61aa570 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -981,7 +981,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) struct macb_queue *queue = dev_id; struct macb *bp = queue->bp; struct net_device *dev = bp->dev; - u32 status; + u32 status, ctrl; status = queue_readl(queue, ISR); @@ -1037,6 +1037,15 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * add that if/when we get our hands on a full-blown MII PHY. */ + if (status & MACB_BIT(RXUBR)) { + ctrl = macb_readl(bp, NCR); + macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE)); + macb_writel(bp, NCR, ctrl | MACB_BIT(RE)); + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RXUBR)); + } + if (status & MACB_BIT(ISR_ROVR)) { /* We missed at least one packet */ if (macb_is_gem(bp)) -- cgit v0.10.2 From 1006da19ea6603135773a79f09e4e931be460429 Mon Sep 17 00:00:00 2001 From: Vasily Titskiy Date: Wed, 6 May 2015 10:31:21 -0400 Subject: drivers/net/usb: Add support for 'Lenovo OneLink Pro Dock' This device is sold as 'Lenovo OneLink Pro Dock'. Chipset is RTL8153 and works with r8152. Signed-off-by: Vasily Titskiy Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ac4d03b..aafa1a1 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4116,6 +4116,7 @@ static struct usb_device_id rtl8152_table[] = { {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205)}, + {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)}, {} }; -- cgit v0.10.2 From d744318574090c3b796915d9d710bdb17db191a1 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 5 May 2015 15:22:02 -0700 Subject: net_sched: fix a use-after-free in tc_ctl_tfilter() When tcf_destroy() returns true, tp could be already destroyed, we should not use tp->next after that. For long term, we probably should move tp list to list_head. Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 8b0470e..b6ef9a0 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -308,12 +308,11 @@ replay: case RTM_DELTFILTER: err = tp->ops->delete(tp, fh); if (err == 0) { - tfilter_notify(net, skb, n, tp, fh, RTM_DELTFILTER); - if (tcf_destroy(tp, false)) { - struct tcf_proto *next = rtnl_dereference(tp->next); + struct tcf_proto *next = rtnl_dereference(tp->next); + tfilter_notify(net, skb, n, tp, fh, RTM_DELTFILTER); + if (tcf_destroy(tp, false)) RCU_INIT_POINTER(*back, next); - } } goto errout; case RTM_GETTFILTER: -- cgit v0.10.2 From 74a78b15e6e3dd909a39e0d99dfa0268c126e2c6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:04:40 +0200 Subject: net: amd-xgbe: Add hardware dependency The amd-xgbe driver currently only works with the Seattle SoC, which is ARM64 architecture, so there is no point in building this driver on other architectures except for build testing purpose. The dependency list can be updated later if the driver ever supports other architectures. Signed-off-by: Jean Delvare Cc: Tom Lendacky Cc: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 089c269..4269160 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -180,6 +180,7 @@ config SUNLANCE config AMD_XGBE tristate "AMD 10GbE Ethernet driver" depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA + depends on ARM64 || COMPILE_TEST select PHYLIB select AMD_XGBE_PHY select BITREVERSE diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 8fadaa1..70641d2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -27,6 +27,7 @@ config AMD_PHY config AMD_XGBE_PHY tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" depends on (OF || ACPI) && HAS_IOMEM + depends on ARM64 || COMPILE_TEST ---help--- Currently supports the AMD 10GbE PHY -- cgit v0.10.2 From ccad725ccb068851fbce2022b2a51fa458d1eac1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:14:34 +0200 Subject: net: xgene_enet: Set hardware dependency The xgene_enet driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Iyappan Subramanian Cc: Keyur Chudgar Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig index f4054d24..19e38af 100644 --- a/drivers/net/ethernet/apm/xgene/Kconfig +++ b/drivers/net/ethernet/apm/xgene/Kconfig @@ -1,6 +1,7 @@ config NET_XGENE tristate "APM X-Gene SoC Ethernet Driver" depends on HAS_DMA + depends on ARCH_XGENE || COMPILE_TEST select PHYLIB help This is the Ethernet driver for the on-chip ethernet interface on the -- cgit v0.10.2 From 240b23c4269777abba4eba43acd1f53ec530bb7d Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Wed, 6 May 2015 09:09:18 -0400 Subject: netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2) This patch should have been part of the previous patch having the same summary. See http://marc.info/?l=linux-kernel&m=143039470103795&w=2 Unfortunately, I didn't check to see where else this lock was used before submitting that patch. This should take care of it for netxen_nic, as I did a thorough search this time. To recap from the original patch; although testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use _bh versions of spin_[un]lock, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: Tony Camuso Acked-By: Neil Horman Acked-By: Manish Chopra Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 8da7c3f..7b43a3b 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -1764,7 +1764,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) int done = 0; struct nx_host_tx_ring *tx_ring = adapter->tx_ring; - if (!spin_trylock(&adapter->tx_clean_lock)) + if (!spin_trylock_bh(&adapter->tx_clean_lock)) return 1; sw_consumer = tx_ring->sw_consumer; @@ -1819,7 +1819,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); - spin_unlock(&adapter->tx_clean_lock); + spin_unlock_bh(&adapter->tx_clean_lock); return done; } -- cgit v0.10.2 From 3e4336a65ab6b45cbac10b8347c8f8951fec515d Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 6 May 2015 15:09:40 +0200 Subject: usbnet: avoid integer overflow in start_xmit transfer_buffer_length is of type u32. It's therefore wrong to assign it to a signed integer. This patch avoids the overflow. It's worth noting that entry->length here is a long; perhaps it would be beneficial at somepoint to change this to be unsigned as well, if nothing else relies on its signedness for error conditions or the like. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 733f4fe..3c86b10 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1285,7 +1285,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) { struct usbnet *dev = netdev_priv(net); - int length; + unsigned int length; struct urb *urb = NULL; struct skb_data *entry; struct driver_info *info = dev->driver_info; @@ -1413,7 +1413,7 @@ not_drop: } } else netif_dbg(dev, tx_queued, dev->net, - "> tx, len %d, type 0x%x\n", length, skb->protocol); + "> tx, len %u, type 0x%x\n", length, skb->protocol); #ifdef CONFIG_PM deferred: #endif -- cgit v0.10.2 From 78f5b899195019f71f7593c604d75ca61658eae3 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Thu, 7 May 2015 08:08:51 -0700 Subject: mpls: Change reserved label names to be consistent with netbsd Since these are now visible to userspace it is nice to be consistent with BSD (sys/netmpls/mpls.h in netBSD). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h index 0fe6ea5..139d4dd 100644 --- a/include/uapi/linux/mpls.h +++ b/include/uapi/linux/mpls.h @@ -32,13 +32,13 @@ struct mpls_label { #define MPLS_LS_TTL_SHIFT 0 /* Reserved labels */ -#define MPLS_LABEL_IPV4_EXPLICIT_NULL 0 /* RFC3032 */ -#define MPLS_LABEL_ROUTER_ALERT 1 /* RFC3032 */ -#define MPLS_LABEL_IPV6_EXPLICIT_NULL 2 /* RFC3032 */ -#define MPLS_LABEL_IMPLICIT_NULL 3 /* RFC3032 */ -#define MPLS_LABEL_ENTROPY_INDICATOR 7 /* RFC6790 */ +#define MPLS_LABEL_IPV4NULL 0 /* RFC3032 */ +#define MPLS_LABEL_RTALERT 1 /* RFC3032 */ +#define MPLS_LABEL_IPV6NULL 2 /* RFC3032 */ +#define MPLS_LABEL_IMPLNULL 3 /* RFC3032 */ +#define MPLS_LABEL_ENTROPY 7 /* RFC6790 */ #define MPLS_LABEL_GAL 13 /* RFC5586 */ -#define MPLS_LABEL_OAM_ALERT 14 /* RFC3429 */ +#define MPLS_LABEL_OAMALERT 14 /* RFC3429 */ #define MPLS_LABEL_EXTENSION 15 /* RFC7274 */ #endif /* _UAPI_MPLS_H */ diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index b6eb761..7b3f732 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -647,7 +647,7 @@ int nla_get_labels(const struct nlattr *nla, return -EINVAL; switch (dec.label) { - case MPLS_LABEL_IMPLICIT_NULL: + case MPLS_LABEL_IMPLNULL: /* RFC3032: This is a label that an LSR may * assign and distribute, but which never * actually appears in the encapsulation. @@ -935,7 +935,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) } /* In case the predefined labels need to be populated */ - if (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV4NULL) { struct net_device *lo = net->loopback_dev; rt0 = mpls_rt_alloc(lo->addr_len); if (!rt0) @@ -945,7 +945,7 @@ static int resize_platform_label_table(struct net *net, size_t limit) rt0->rt_via_table = NEIGH_LINK_TABLE; memcpy(rt0->rt_via, lo->dev_addr, lo->addr_len); } - if (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL) { + if (limit > MPLS_LABEL_IPV6NULL) { struct net_device *lo = net->loopback_dev; rt2 = mpls_rt_alloc(lo->addr_len); if (!rt2) @@ -973,15 +973,15 @@ static int resize_platform_label_table(struct net *net, size_t limit) memcpy(labels, old, cp_size); /* If needed set the predefined labels */ - if ((old_limit <= MPLS_LABEL_IPV6_EXPLICIT_NULL) && - (limit > MPLS_LABEL_IPV6_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6_EXPLICIT_NULL], rt2); + if ((old_limit <= MPLS_LABEL_IPV6NULL) && + (limit > MPLS_LABEL_IPV6NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV6NULL], rt2); rt2 = NULL; } - if ((old_limit <= MPLS_LABEL_IPV4_EXPLICIT_NULL) && - (limit > MPLS_LABEL_IPV4_EXPLICIT_NULL)) { - RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4_EXPLICIT_NULL], rt0); + if ((old_limit <= MPLS_LABEL_IPV4NULL) && + (limit > MPLS_LABEL_IPV4NULL)) { + RCU_INIT_POINTER(labels[MPLS_LABEL_IPV4NULL], rt0); rt0 = NULL; } -- cgit v0.10.2 From dbfe8ef5599a5370abc441fcdbb382b656563eb4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 8 May 2015 15:23:55 -0400 Subject: ahci: avoton port-disable reset-quirk Avoton AHCI occasionally sees drive probe timeouts at driver load time. When this happens SCR_STATUS indicates device detected, but no D2H FIS reception. Reset the internal link state machines by bouncing port-enable in the PCS register when this occurs. Cc: Signed-off-by: Dan Williams Signed-off-by: Tejun Heo diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c7a92a7..65ee944 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -66,6 +66,7 @@ enum board_ids { board_ahci_yes_fbs, /* board IDs for specific chipsets in alphabetical order */ + board_ahci_avn, board_ahci_mcp65, board_ahci_mcp77, board_ahci_mcp89, @@ -84,6 +85,8 @@ enum board_ids { static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void ahci_mcp89_apple_enable(struct pci_dev *pdev); static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, @@ -107,6 +110,11 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_avn_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_avn_hardreset, +}; + static const struct ata_port_info ahci_port_info[] = { /* by features */ [board_ahci] = { @@ -151,6 +159,12 @@ static const struct ata_port_info ahci_port_info[] = { .port_ops = &ahci_ops, }, /* by chipsets */ + [board_ahci_avn] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_avn_ops, + }, [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), @@ -290,14 +304,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */ @@ -670,6 +684,79 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, return rc; } +/* + * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports. + * + * It has been observed with some SSDs that the timing of events in the + * link synchronization phase can leave the port in a state that can not + * be recovered by a SATA-hard-reset alone. The failing signature is + * SStatus.DET stuck at 1 ("Device presence detected but Phy + * communication not established"). It was found that unloading and + * reloading the driver when this problem occurs allows the drive + * connection to be recovered (DET advanced to 0x3). The critical + * component of reloading the driver is that the port state machines are + * reset by bouncing "port enable" in the AHCI PCS configuration + * register. So, reproduce that effect by bouncing a port whenever we + * see DET==1 after a reset. + */ +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + unsigned long tmo = deadline - jiffies; + struct ata_taskfile tf; + bool online; + int rc, i; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; + u32 sstatus; + int port = ap->port_no; + struct ata_host *host = ap->host; + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 || + (sstatus & 0xf) != 1) + break; + + ata_link_printk(link, KERN_INFO, "avn bounce port%d\n", + port); + + pci_read_config_word(pdev, 0x92, &val); + val &= ~(1 << port); + pci_write_config_word(pdev, 0x92, val); + ata_msleep(ap, 1000); + val |= 1 << port; + pci_write_config_word(pdev, 0x92, val); + deadline += tmo; + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + + #ifdef CONFIG_PM static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { -- cgit v0.10.2 From fdb68e09bbb1c981f24608d7022c7d93cc47b326 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Tue, 7 Apr 2015 06:31:09 +0200 Subject: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 844b03f27739135fe1fed2fef06da0ffc4c7a081 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner Cc: #v3.17+ Cc: Ville Syrjälä Cc: Daniel Vetter Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index c8a3447..af9662e 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -131,12 +131,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc) /* Reinitialize corresponding vblank timestamp if high-precision query * available. Skip this step if query unsupported or failed. Will - * reinitialize delayed at next vblank interrupt in that case. + * reinitialize delayed at next vblank interrupt in that case and + * assign 0 for now, to mark the vblanktimestamp as invalid. */ - if (rc) { - tslot = atomic_read(&vblank->count) + diff; - vblanktimestamp(dev, crtc, tslot) = t_vblank; - } + tslot = atomic_read(&vblank->count) + diff; + vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0}; smp_mb__before_atomic(); atomic_add(diff, &vblank->count); -- cgit v0.10.2 From 030bbdbf4c833bc69f502eae58498bc5572db736 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 May 2015 15:12:29 -0700 Subject: Linux 4.1-rc3 diff --git a/Makefile b/Makefile index 2da553f..eae539d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* -- cgit v0.10.2 From 19fc99d0c6ba7d9b65456496b5bb2169d5f74cd0 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 6 May 2015 18:31:56 +0200 Subject: ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction. In that case, emit_udiv() will be called with rn == ARM_R0 (r_scratch) and loading rm first into ARM_R0 will result in jit_udiv() function being called the same dividend and divisor. Fix that by loading rn first into ARM_R1 and then rm into ARM_R0. Signed-off-by: Nicolas Schichan Cc: # v3.13+ Fixes: aee636c4809f (bpf: do not use reciprocal divide) Acked-by: Mircea Gherzan Signed-off-by: David S. Miller diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index e1268f9..f412b53 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -449,10 +449,21 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx) return; } #endif - if (rm != ARM_R0) - emit(ARM_MOV_R(ARM_R0, rm), ctx); + + /* + * For BPF_ALU | BPF_DIV | BPF_K instructions, rm is ARM_R4 + * (r_A) and rn is ARM_R0 (r_scratch) so load rn first into + * ARM_R1 to avoid accidentally overwriting ARM_R0 with rm + * before using it as a source for ARM_R1. + * + * For BPF_ALU | BPF_DIV | BPF_X rm is ARM_R4 (r_A) and rn is + * ARM_R5 (r_X) so there is no particular register overlap + * issues. + */ if (rn != ARM_R1) emit(ARM_MOV_R(ARM_R1, rn), ctx); + if (rm != ARM_R0) + emit(ARM_MOV_R(ARM_R0, rm), ctx); ctx->seen |= SEEN_CALL; emit_mov_i(ARM_R3, (u32)jit_udiv, ctx); -- cgit v0.10.2 From 0b59d8806a31bb0267b3a461e8fef20c727bdbf6 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 7 May 2015 17:14:21 +0200 Subject: ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits. The ARM JIT code emits "ldr rX, [pc, #offset]" to access the literal pool. #offset maximum value is 4095 and if the generated code is too large, the #offset value can overflow and not point to the expected slot in the literal pool. Additionally, when overflow occurs, bits of the overflow can end up changing the destination register of the ldr instruction. Fix that by detecting the overflow in imm_offset() and setting a flag that is checked for each BPF instructions converted in build_body(). As of now it can only be detected in the second pass. As a result the second build_body() call can now fail, so add the corresponding cleanup code in that case. Using multiple literal pools in the JITed code is going to require lots of intrusive changes to the JIT code (which would better be done as a feature instead of fix), just delegating to the kernel BPF interpreter in that case is a more straight forward, minimal fix and easy to backport. Fixes: ddecdfcea0ae ("ARM: 7259/3: net: JIT compiler for packet filters") Signed-off-by: Nicolas Schichan Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f412b53..e0e2358 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -54,6 +54,7 @@ #define SEEN_DATA (1 << (BPF_MEMWORDS + 3)) #define FLAG_NEED_X_RESET (1 << 0) +#define FLAG_IMM_OVERFLOW (1 << 1) struct jit_ctx { const struct bpf_prog *skf; @@ -293,6 +294,15 @@ static u16 imm_offset(u32 k, struct jit_ctx *ctx) /* PC in ARM mode == address of the instruction + 8 */ imm = offset - (8 + ctx->idx * 4); + if (imm & ~0xfff) { + /* + * literal pool is too far, signal it into flags. we + * can only detect it on the second pass unfortunately. + */ + ctx->flags |= FLAG_IMM_OVERFLOW; + return 0; + } + return imm; } @@ -866,6 +876,14 @@ b_epilogue: default: return -1; } + + if (ctx->flags & FLAG_IMM_OVERFLOW) + /* + * this instruction generated an overflow when + * trying to access the literal pool, so + * delegate this filter to the kernel interpreter. + */ + return -1; } /* compute offsets only during the first pass */ @@ -928,7 +946,14 @@ void bpf_jit_compile(struct bpf_prog *fp) ctx.idx = 0; build_prologue(&ctx); - build_body(&ctx); + if (build_body(&ctx) < 0) { +#if __LINUX_ARM_ARCH__ < 7 + if (ctx.imm_count) + kfree(ctx.imms); +#endif + bpf_jit_binary_free(header); + goto out; + } build_epilogue(&ctx); flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx)); -- cgit v0.10.2 From cd9c39977754d9602b5783a44f4af09530a58254 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 7 May 2015 20:37:10 +0200 Subject: bnx2x: limit fw delay in kdump to 5s after boot Commit 12a8541d5c82 "bnx2x: Delay during kdump load" added a 5 seconds delay to bnx2x's probe function in the kdump case to let the firmware realize the old driver is gone. The problem with the delay is that it is per-device, so if you have several bnx2x NICs in NPAR mode, the delays can accumulate to minutes. Fix it by adjusting the delay so that we do not wait more than necessary, i.e. no more delaying after 5 seconds of kernel boot time. Signed-off-by: Michal Schmidt Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 556dcc1..fd52ce9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13371,8 +13371,13 @@ static int bnx2x_init_one(struct pci_dev *pdev, /* Management FW 'remembers' living interfaces. Allow it some time * to forget previously living interfaces, allowing a proper re-load. */ - if (is_kdump_kernel()) - msleep(5000); + if (is_kdump_kernel()) { + ktime_t now = ktime_get_boottime(); + ktime_t fw_ready_time = ktime_set(5, 0); + + if (ktime_before(now, fw_ready_time)) + msleep(ktime_ms_delta(fw_ready_time, now)); + } /* An estimated maximum supported CoS number according to the chip * version. -- cgit v0.10.2 From fbf33a2802f71dba06faa948af805884ff16a2ab Mon Sep 17 00:00:00 2001 From: "Kretschmer, Mathias" Date: Fri, 8 May 2015 15:44:37 +0200 Subject: af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT). This patch fixes an issue where the send(MSG_DONTWAIT) call on a TX_RING is not fully non-blocking in cases where the device's sndBuf is full. We pass nonblock=true to sock_alloc_send_skb() and return any possibly occuring error code (most likely EGAIN) to the caller. As the fast-path stays as it is, we keep the unlikely() around skb == NULL. Signed-off-by: Mathias Kretschmer Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 5102c3c..b5989c6 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2311,11 +2311,14 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) tlen = dev->needed_tailroom; skb = sock_alloc_send_skb(&po->sk, hlen + tlen + sizeof(struct sockaddr_ll), - 0, &err); + !need_wait, &err); - if (unlikely(skb == NULL)) + if (unlikely(skb == NULL)) { + /* we assume the socket was initially writeable ... */ + if (likely(len_sum > 0)) + err = len_sum; goto out_status; - + } tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto, addr, hlen); if (tp_len > dev->mtu + dev->hard_header_len) { -- cgit v0.10.2 From 7c0c82682873354490a5b67c77331bd65a356236 Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Fri, 8 May 2015 16:18:49 +0200 Subject: net: mdio-gpio: Allow for unspecified bus id When the bus id was supplied via a struct platform_device, the driver wasn't handling -1 to mean an unspecified id of the only instance of this driver, as the platform spec requires. Signed-off-by: Bert Vermeulen Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index c9cb486c..53d1815 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -168,7 +168,10 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, if (!new_bus->irq[i]) new_bus->irq[i] = PHY_POLL; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + if (bus_id != -1) + snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + else + strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE); if (devm_gpio_request(dev, bitbang->mdc, "mdc")) goto out_free_bus; -- cgit v0.10.2 From 268be0f7a7d9b3644bcb99568efba13cb208b627 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 9 May 2015 07:58:09 +0000 Subject: net: qca_spi: Fix possible race during probe Registering the netdev before setting the priv data is unsafe. So fix this possible race by setting the priv data first. Signed-off-by: Stefan Wahren Cc: # v3.18+ Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index f66641d..6af028d 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -912,6 +912,8 @@ qca_spi_probe(struct spi_device *spi_device) qca->spi_dev = spi_device; qca->legacy_mode = legacy_mode; + spi_set_drvdata(spi_device, qcaspi_devs); + mac = of_get_mac_address(spi_device->dev.of_node); if (mac) @@ -944,8 +946,6 @@ qca_spi_probe(struct spi_device *spi_device) return -EFAULT; } - spi_set_drvdata(spi_device, qcaspi_devs); - qcaspi_init_device_debugfs(qca); return 0; -- cgit v0.10.2 From 5dc5616ee850eaba055bb469a6c4a471d489140e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 May 2015 17:44:22 +0100 Subject: iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1 Stage 1 translation is controlled by two sets of page tables (TTBR0 and TTBR1) which grow up and down from zero respectively in the ARMv8 translation regime. For the SMMU, we only care about TTBR0 and, in the case of a 48-bit virtual space, we expect to map virtual addresses 0x0 through to 0xffff_ffff_ffff. Given that some masters may be incapable of emitting virtual addresses targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU architecture allows bit 47 to be sign-extended, halving the virtual range of TTBR0 but allowing TTBR1 to be used. This is controlled by the SEP field in TTBCR2. The SMMU driver incorrectly enables this sign-extension feature, which causes problems when userspace addresses are programmed into a master device with the SMMU expecting to map the incoming transactions via TTBR0; if the top bit of address is set, we will instead get a translation fault since TTBR1 walks are disabled in the TTBCR. This patch fixes the issue by disabling sign-extension of a fixed virtual address bit and instead basing the behaviour on the upstream bus size: the incoming address is zero extended unless the upstream bus is only 49 bits wide, in which case bit 48 is used as the sign bit and is replicated to the upper bits. Cc: # v4.0+ Reported-by: Varun Sethi Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 9f7e1d3..66a803b 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -224,14 +224,7 @@ #define RESUME_TERMINATE (1 << 0) #define TTBCR2_SEP_SHIFT 15 -#define TTBCR2_SEP_MASK 0x7 - -#define TTBCR2_ADDR_32 0 -#define TTBCR2_ADDR_36 1 -#define TTBCR2_ADDR_40 2 -#define TTBCR2_ADDR_42 3 -#define TTBCR2_ADDR_44 4 -#define TTBCR2_ADDR_48 5 +#define TTBCR2_SEP_UPSTREAM (0x7 << TTBCR2_SEP_SHIFT) #define TTBRn_HI_ASID_SHIFT 16 @@ -793,26 +786,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain, writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBCR); if (smmu->version > ARM_SMMU_V1) { reg = pgtbl_cfg->arm_lpae_s1_cfg.tcr >> 32; - switch (smmu->va_size) { - case 32: - reg |= (TTBCR2_ADDR_32 << TTBCR2_SEP_SHIFT); - break; - case 36: - reg |= (TTBCR2_ADDR_36 << TTBCR2_SEP_SHIFT); - break; - case 40: - reg |= (TTBCR2_ADDR_40 << TTBCR2_SEP_SHIFT); - break; - case 42: - reg |= (TTBCR2_ADDR_42 << TTBCR2_SEP_SHIFT); - break; - case 44: - reg |= (TTBCR2_ADDR_44 << TTBCR2_SEP_SHIFT); - break; - case 48: - reg |= (TTBCR2_ADDR_48 << TTBCR2_SEP_SHIFT); - break; - } + reg |= TTBCR2_SEP_UPSTREAM; writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBCR2); } } else { -- cgit v0.10.2 From 665a6cd809f43eec2b51413816a4178a3390a870 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 9 May 2015 23:08:38 +0200 Subject: pppoe: drop pppoe device in pppoe_unbind_sock_work After receiving a PADT and the socket is closed, user space will no longer drop the reference to the pppoe device. This leads to errors like this: [ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2 Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by: Felix Fietkau Signed-off-by: David S. Miller diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index aa1dd92..b62a5e3 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -465,6 +465,10 @@ static void pppoe_unbind_sock_work(struct work_struct *work) struct sock *sk = sk_pppox(po); lock_sock(sk); + if (po->pppoe_dev) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } pppox_unbind_sock(sk); release_sock(sk); sock_put(sk); -- cgit v0.10.2 From 145a42b3a964c6647464f05bd58aa33787de7f75 Mon Sep 17 00:00:00 2001 From: David Ward Date: Sat, 9 May 2015 22:01:47 -0400 Subject: net_sched: gred: use correct backlog value in WRED mode In WRED mode, the backlog for a single virtual queue (VQ) should not be used to determine queue behavior; instead the backlog is summed across all VQs. This sum is currently used when calculating the average queue lengths. It also needs to be used when determining if the queue's hard limit has been reached, or when reporting each VQ's backlog via netlink. q->backlog will only be used if the queue switches out of WRED mode. Signed-off-by: David Ward Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index a4ca451..634529e 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -229,7 +229,7 @@ static int gred_enqueue(struct sk_buff *skb, struct Qdisc *sch) break; } - if (q->backlog + qdisc_pkt_len(skb) <= q->limit) { + if (gred_backlog(t, q, sch) + qdisc_pkt_len(skb) <= q->limit) { q->backlog += qdisc_pkt_len(skb); return qdisc_enqueue_tail(skb, sch); } @@ -553,7 +553,7 @@ static int gred_dump(struct Qdisc *sch, struct sk_buff *skb) opt.limit = q->limit; opt.DP = q->DP; - opt.backlog = q->backlog; + opt.backlog = gred_backlog(table, q, sch); opt.prio = q->prio; opt.qth_min = q->parms.qth_min >> q->parms.Wlog; opt.qth_max = q->parms.qth_max >> q->parms.Wlog; -- cgit v0.10.2 From 94634e9861abbc3036d7041773971c8e31ec2680 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 11 May 2015 16:38:02 +0200 Subject: IB/ehca: use correct destination for memcpy Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: Dan Carpenter Signed-off-by: Nicholas Mc Guire Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c index 120aedf..cec1815 100644 --- a/drivers/infiniband/hw/ehca/ehca_mcast.c +++ b/drivers/infiniband/hw/ehca/ehca_mcast.c @@ -77,7 +77,7 @@ int ehca_attach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return -EINVAL; } - memcpy(&my_gid.raw, gid->raw, sizeof(union ib_gid)); + memcpy(&my_gid, gid->raw, sizeof(union ib_gid)); subnet_prefix = be64_to_cpu(my_gid.global.subnet_prefix); interface_id = be64_to_cpu(my_gid.global.interface_id); @@ -114,7 +114,7 @@ int ehca_detach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return -EINVAL; } - memcpy(&my_gid.raw, gid->raw, sizeof(union ib_gid)); + memcpy(&my_gid, gid->raw, sizeof(union ib_gid)); subnet_prefix = be64_to_cpu(my_gid.global.subnet_prefix); interface_id = be64_to_cpu(my_gid.global.interface_id); -- cgit v0.10.2 From 940fd304d233534038365f56d30c29ed7fd7416b Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 7 May 2015 16:34:23 -0500 Subject: iw_cxgb4: use wildcard mapping for getting remote addr info For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4//eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise Reviewed-by: Tatyana Nikolova Reviewed-by: Jason Gunthorpe Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index bb95a6c..3ad8dc7 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -583,18 +583,18 @@ static void c4iw_record_pm_msg(struct c4iw_ep *ep, sizeof(ep->com.mapped_remote_addr)); } -static int get_remote_addr(struct c4iw_ep *ep) +static int get_remote_addr(struct c4iw_ep *parent_ep, struct c4iw_ep *child_ep) { int ret; - print_addr(&ep->com, __func__, "get_remote_addr"); + print_addr(&parent_ep->com, __func__, "get_remote_addr parent_ep "); + print_addr(&child_ep->com, __func__, "get_remote_addr child_ep "); - ret = iwpm_get_remote_info(&ep->com.mapped_local_addr, - &ep->com.mapped_remote_addr, - &ep->com.remote_addr, RDMA_NL_C4IW); + ret = iwpm_get_remote_info(&parent_ep->com.mapped_local_addr, + &child_ep->com.mapped_remote_addr, + &child_ep->com.remote_addr, RDMA_NL_C4IW); if (ret) - pr_info(MOD "Unable to find remote peer addr info - err %d\n", - ret); + PDBG("Unable to find remote peer addr info - err %d\n", ret); return ret; } @@ -2420,7 +2420,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) } memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr, sizeof(child_ep->com.remote_addr)); - get_remote_addr(child_ep); + get_remote_addr(parent_ep, child_ep); c4iw_get_ep(&parent_ep->com); child_ep->parent_ep = parent_ep; -- cgit v0.10.2 From 2936ae04aa5d7ebfd9921e363a8e8686f8bb5936 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Mon, 11 May 2015 21:03:36 -0400 Subject: MAINTAINERS: update the official rdma git repo Linus prefers kernel.org repos to github repos for security. Signed-off-by: Doug Ledford diff --git a/MAINTAINERS b/MAINTAINERS index 40c14f1..c1911a7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5048,7 +5048,7 @@ M: Hal Rosenstock L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ -T: git git://github.com/dledford/linux.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ -- cgit v0.10.2 From cafb45b2562baa57cb58bef0636c073705954cc4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 12 May 2015 06:43:04 +0200 Subject: MIPS: SMP: Fix build error. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/kernel/smp.o arch/mips/kernel/smp.c: In function ‘start_secondary’: arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(cpu, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’: arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(0, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘__cpu_up’: arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] while (!cpumask_test_cpu(cpu, &cpu_callin_map)) ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/smp.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index bb02fac..2b25d1b 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -45,7 +45,7 @@ extern int __cpu_logical_map[NR_CPUS]; #define SMP_DUMP 0x8 #define SMP_ASK_C0COUNT 0x10 -extern volatile cpumask_t cpu_callin_map; +extern cpumask_t cpu_callin_map; /* Mask of CPUs which are currently definitely operating coherently */ extern cpumask_t cpu_coherent_mask; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 193ace7..faa46eb 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -43,7 +43,7 @@ #include #include -volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ +cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ EXPORT_SYMBOL(__cpu_number_map); @@ -218,8 +218,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle) /* * Trust is futile. We should really have timeouts ... */ - while (!cpumask_test_cpu(cpu, &cpu_callin_map)) + while (!cpumask_test_cpu(cpu, &cpu_callin_map)) { udelay(100); + schedule(); + } synchronise_count_master(cpu); return 0; -- cgit v0.10.2 From 6938f8558167fd1d30233018976ebe310fa6f69b Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 12 May 2015 02:13:50 -0400 Subject: Update be2net maintainers' email addresses Emulex developers' email addresses are now "@avagotech" instead of "@emulex". I'm also replacing Subbu with Padmanabh and Sriharsha in the maintainers list. The driver's heading was outdated and did not include some of the chip types (BE3, Lancer and Skyhawk) that the driver has been supporting for a longtime. I've updated this too. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index fa4e59d..85bd662 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8799,10 +8799,11 @@ W: http://www.emulex.com S: Supported F: drivers/scsi/be2iscsi/ -SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER -M: Sathya Perla -M: Subbu Seetharaman -M: Ajit Khaparde +Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER +M: Sathya Perla +M: Ajit Khaparde +M: Padmanabh Ratnakar +M: Sriharsha Basavapatna L: netdev@vger.kernel.org W: http://www.emulex.com S: Supported -- cgit v0.10.2 From 620b155034570f577470cf5309f741bac6a6e32b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 6 May 2015 11:52:32 +0100 Subject: MIPS: fix FP mode selection in lieu of .MIPS.abiflags data Commit 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") reworked the ELF FP ABI mode selection logic, but when CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries which have no PT_MIPS_ABIFLAGS program header & associated .MIPS.abiflags section. A default mode is selected based upon whether the ELF contains MIPS32 or MIPS64 code, but that selection is made in arch_elf_pt_proc. arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is found. If one is not found then arch_elf_pt_proc is never called, and no default overall_fp_mode value is selected. When arch_check_elf is called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both prog_req & interp_req being set to none_req. none_req matches none of the conditions for mode selection at the end of arch_check_elf, so overall_fp_mode is left untouched. Finally once mips_set_personality_fp is called the BUG() in the default case is then hit & the kernel likely panics. Fix this by moving the selection of a default overall mode to the start of arch_check_elf, which runs once per ELF executed regardless of whether it has a PT_MIPS_ABIFLAGS program header. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: Matthew Fortune Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: http://patchwork.linux-mips.org/patch/9978/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c index be4899f..4a4d9e0 100644 --- a/arch/mips/kernel/elf.c +++ b/arch/mips/kernel/elf.c @@ -76,14 +76,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, /* Lets see if this is an O32 ELF */ if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) { - /* FR = 1 for N32 */ - if (ehdr32->e_flags & EF_MIPS_ABI2) - state->overall_fp_mode = FP_FR1; - else - /* Set a good default FPU mode for O32 */ - state->overall_fp_mode = cpu_has_mips_r6 ? - FP_FRE : FP_FR0; - if (ehdr32->e_flags & EF_MIPS_FP64) { /* * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it @@ -104,9 +96,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, (char *)&abiflags, sizeof(abiflags)); } else { - /* FR=1 is really the only option for 64-bit */ - state->overall_fp_mode = FP_FR1; - if (phdr64->p_type != PT_MIPS_ABIFLAGS) return 0; if (phdr64->p_filesz < sizeof(abiflags)) @@ -137,6 +126,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, struct elf32_hdr *ehdr = _ehdr; struct mode_req prog_req, interp_req; int fp_abi, interp_fp_abi, abi0, abi1, max_abi; + bool is_mips64; if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT)) return 0; @@ -152,10 +142,22 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, abi0 = abi1 = fp_abi; } - /* ABI limits. O32 = FP_64A, N32/N64 = FP_SOFT */ - max_abi = ((ehdr->e_ident[EI_CLASS] == ELFCLASS32) && - (!(ehdr->e_flags & EF_MIPS_ABI2))) ? - MIPS_ABI_FP_64A : MIPS_ABI_FP_SOFT; + is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) || + (ehdr->e_flags & EF_MIPS_ABI2); + + if (is_mips64) { + /* MIPS64 code always uses FR=1, thus the default is easy */ + state->overall_fp_mode = FP_FR1; + + /* Disallow access to the various FPXX & FP64 ABIs */ + max_abi = MIPS_ABI_FP_SOFT; + } else { + /* Default to a mode capable of running code expecting FR=0 */ + state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0; + + /* Allow all ABIs we know about */ + max_abi = MIPS_ABI_FP_64A; + } if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) || (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN)) -- cgit v0.10.2 From ec04847c0c5b471bab2dacceadfdb803a9d1a2ea Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 8 May 2015 16:36:33 -0500 Subject: RDMA/core: Fix for parsing netlink string attribute The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: Tatyana Nikolova Cc: #v3.16 Reviewed-By: Jason Gunthorpe Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c index ab08170..e6ffa2e 100644 --- a/drivers/infiniband/core/iwpm_msg.c +++ b/drivers/infiniband/core/iwpm_msg.c @@ -33,7 +33,7 @@ #include "iwpm_util.h" -static const char iwpm_ulib_name[] = "iWarpPortMapperUser"; +static const char iwpm_ulib_name[IWPM_ULIBNAME_SIZE] = "iWarpPortMapperUser"; static int iwpm_ulib_version = 3; static int iwpm_user_pid = IWPM_PID_UNDEFINED; static atomic_t echo_nlmsg_seq; -- cgit v0.10.2 From ec40f925e0151e3c130fce2b5a1c6389c5b5e4dd Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 12 May 2015 13:42:42 -0400 Subject: IB/qib: fix test of unsigned variable Commit d4988623cc60 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index ba5173e2..7df16f7 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -903,7 +903,7 @@ struct qib_devdata { /* PCI Device ID (here for NodeInfo) */ u16 deviceid; /* for write combining settings */ - unsigned long wc_cookie; + int wc_cookie; unsigned long wc_base; unsigned long wc_len; diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c index 6d61ef9..edd0ddb 100644 --- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c +++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c @@ -118,7 +118,8 @@ int qib_enable_wc(struct qib_devdata *dd) if (!ret) { dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen); if (dd->wc_cookie < 0) - ret = -EINVAL; + /* use error from routine */ + ret = dd->wc_cookie; } return ret; -- cgit v0.10.2 From f4f01b542c027b0df57109140c3ee48321705c88 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 8 May 2015 15:58:07 -0700 Subject: infiniband: Remove duplicated KERN_ from pr_ uses These KERN_ uses are unnecessary with pr_ and cause bad logging output so remove them. Signed-off-by: Joe Perches Acked-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index cf54d69..7e895d7 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -1386,7 +1386,7 @@ static void recover_lost_dbs(struct uld_ctx *ctx, struct qp_list *qp_list) t4_sq_host_wq_pidx(&qp->wq), t4_sq_wq_size(&qp->wq)); if (ret) { - pr_err(KERN_ERR MOD "%s: Fatal error - " + pr_err(MOD "%s: Fatal error - " "DB overflow recovery failed - " "error syncing SQ qid %u\n", pci_name(ctx->lldi.pdev), qp->wq.sq.qid); @@ -1402,7 +1402,7 @@ static void recover_lost_dbs(struct uld_ctx *ctx, struct qp_list *qp_list) t4_rq_wq_size(&qp->wq)); if (ret) { - pr_err(KERN_ERR MOD "%s: Fatal error - " + pr_err(MOD "%s: Fatal error - " "DB overflow recovery failed - " "error syncing RQ qid %u\n", pci_name(ctx->lldi.pdev), qp->wq.rq.qid); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 57070c5..cc64400 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1569,8 +1569,7 @@ static void reset_gids_task(struct work_struct *work) MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED); if (err) - pr_warn(KERN_WARNING - "set port %d command failed\n", gw->port); + pr_warn("set port %d command failed\n", gw->port); } mlx4_free_cmd_mailbox(dev, mailbox); diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 4d7024b..d35f62d 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1392,7 +1392,7 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, const struct ib_ah_attr *ah, if (ah->ah_flags & IB_AH_GRH) { if (ah->grh.sgid_index >= gen->port[port - 1].gid_table_len) { - pr_err(KERN_ERR "sgid_index (%u) too large. max is %d\n", + pr_err("sgid_index (%u) too large. max is %d\n", ah->grh.sgid_index, gen->port[port - 1].gid_table_len); return -EINVAL; } -- cgit v0.10.2 From e3d8ecb70e16412b14fb11c1b68ecb533bd4ea64 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 11 May 2015 15:57:31 +0200 Subject: netns: return RTM_NEWNSID instead of RTM_GETNSID on a get Usually, RTM_NEWxxx is returned on a get (same as a dump). Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 78fc04a..572af00 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -601,7 +601,7 @@ static int rtnl_net_getid(struct sk_buff *skb, struct nlmsghdr *nlh) } err = rtnl_net_fill(msg, NETLINK_CB(skb).portid, nlh->nlmsg_seq, 0, - RTM_GETNSID, net, peer, -1); + RTM_NEWNSID, net, peer, -1); if (err < 0) goto err_out; -- cgit v0.10.2 From 343f845b375989f1753f605902931fa939aa2223 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Mon, 11 May 2015 23:25:16 -0700 Subject: x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions FROM_BE16: 'ror %reg, 8' doesn't clear upper bits of the register, so use additional 'movzwl' insn to zero extend 16 bits into 64 FROM_LE16: should zero extend lower 16 bits into 64 bit FROM_LE32: should zero extend lower 32 bits into 64 bit Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 9875143..99f7610 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, if (is_ereg(dst_reg)) EMIT1(0x41); EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8); + + /* emit 'movzwl eax, ax' */ + if (is_ereg(dst_reg)) + EMIT3(0x45, 0x0F, 0xB7); + else + EMIT2(0x0F, 0xB7); + EMIT1(add_2reg(0xC0, dst_reg, dst_reg)); break; case 32: /* emit 'bswap eax' to swap lower 4 bytes */ @@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, break; case BPF_ALU | BPF_END | BPF_FROM_LE: + switch (imm32) { + case 16: + /* emit 'movzwl eax, ax' to zero extend 16-bit + * into 64 bit + */ + if (is_ereg(dst_reg)) + EMIT3(0x45, 0x0F, 0xB7); + else + EMIT2(0x0F, 0xB7); + EMIT1(add_2reg(0xC0, dst_reg, dst_reg)); + break; + case 32: + /* emit 'mov eax, eax' to clear upper 32-bits */ + if (is_ereg(dst_reg)) + EMIT1(0x45); + EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg)); + break; + case 64: + /* nop */ + break; + } break; /* ST: *(u8*)(dst_reg + off) = imm */ -- cgit v0.10.2 From 44d4f8d74e1dd07f248f35d74419f07d44f326e6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 May 2015 08:06:15 +0200 Subject: net: ll_temac: Fix DMA map size bug DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 690a4c3..af2694d 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -707,8 +707,8 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) cur_p->app0 |= STS_CTRL_APP0_SOP; cur_p->len = skb_headlen(skb); - cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len, - DMA_TO_DEVICE); + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); cur_p->app4 = (unsigned long)skb; for (ii = 0; ii < num_frag; ii++) { -- cgit v0.10.2 From bced870152161435cc59a53e77f3699f8e8f22ca Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 12 May 2015 09:43:14 +0200 Subject: net: phy: micrel: Fix regression in kszphy_probe Don't do clock-mode-select if clk == NULL, since when building without CONFIG_HAVE_CLK, clk_get returns NULL and clk_get_rate returns 0. Doing clock-mode-select in this cause causes kszphy_probe to return -EINVAL and thus prevents the device from being probed. The original code (before regression) would return 0 when building without CONFIG_HAVE_CLK. Cc: stable # 3.18+ Fixes: 1fadee0c3645 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031") Reviewed-by: Fabio Estevam Reviewed-by: Johan Hovold Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 1190fd8..ebdc357 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -548,7 +548,8 @@ static int kszphy_probe(struct phy_device *phydev) } clk = devm_clk_get(&phydev->dev, "rmii-ref"); - if (!IS_ERR(clk)) { + /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */ + if (!IS_ERR_OR_NULL(clk)) { unsigned long rate = clk_get_rate(clk); bool rmii_ref_clk_sel_25_mhz; -- cgit v0.10.2 From 5684044f8062617dcc45ed8b2fb3ec6e02f14370 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:36:59 -0600 Subject: e1000e: Add pm_qos header Commit e2c6544829f moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: David Ahern Cc: Thomas Graf Cc: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 5d9ceb1..0abc942 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -40,6 +40,7 @@ #include #include #include +#include #include "hw.h" struct e1000_info; -- cgit v0.10.2 From 01d460dd70adc858e15307332832183c622bee50 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:37:00 -0600 Subject: net: Remove remaining remnants of pm_qos from netdevice.h Commit e2c6544829f removed pm_qos from struct net_device but left the comment and header file. Remove those. Signed-off-by: David Ahern Cc: Thomas Graf Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1899c74..05b9a69 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -25,7 +25,6 @@ #ifndef _LINUX_NETDEVICE_H #define _LINUX_NETDEVICE_H -#include #include #include #include @@ -1499,8 +1498,6 @@ enum netdev_priv_flags { * * @qdisc_tx_busylock: XXX: need comments on this one * - * @pm_qos_req: Power Management QoS object - * * FIXME: cleanup struct net_device such that network protocol info * moves out. */ -- cgit v0.10.2