From ddfbac07c0e87e221596a439e8fb3937b95db228 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 25 Apr 2014 17:43:56 -0400 Subject: qlcnic: Optimize MAC learning code * Use rx_mac_learn instead of mac_learn and eSwitch flag check in Rx path of 82xx adapter. * Check for MAC filter overrun only after driver scans through cached MAC address list. This will help to update the time stamp of cached MAC addresses even if adapter runs out of MAC address filter limit. * Remove expensive log thrown by driver when MAC address filters are exhausted Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 173b3d1..deb2278 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -305,7 +305,6 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, { struct vlan_ethhdr *vh = (struct vlan_ethhdr *)(skb->data); struct ethhdr *phdr = (struct ethhdr *)(skb->data); - struct net_device *netdev = adapter->netdev; u16 protocol = ntohs(skb->protocol); struct qlcnic_filter *fil, *tmp_fil; struct hlist_head *head; @@ -330,13 +329,6 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, return; } - if (adapter->fhash.fnum >= adapter->fhash.fmax) { - adapter->stats.mac_filter_limit_overrun++; - netdev_info(netdev, "Can not add more than %d mac-vlan filters, configured %d\n", - adapter->fhash.fmax, adapter->fhash.fnum); - return; - } - memcpy(&src_addr, phdr->h_source, ETH_ALEN); hval = qlcnic_mac_hash(src_addr, vlan_id); hindex = hval & (adapter->fhash.fbucket_size - 1); @@ -353,6 +345,11 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, } } + if (unlikely(adapter->fhash.fnum >= adapter->fhash.fmax)) { + adapter->stats.mac_filter_limit_overrun++; + return; + } + fil = kzalloc(sizeof(struct qlcnic_filter), GFP_ATOMIC); if (!fil) return; @@ -1216,8 +1213,7 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter, if (!skb) return buffer; - if (adapter->drv_mac_learn && - (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + if (adapter->rx_mac_learn) { t_vid = 0; is_lb_pkt = qlcnic_82xx_is_lb_pkt(sts_data0); qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, t_vid); @@ -1293,8 +1289,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, if (!skb) return buffer; - if (adapter->drv_mac_learn && - (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + if (adapter->rx_mac_learn) { t_vid = 0; is_lb_pkt = qlcnic_82xx_is_lb_pkt(sts_data0); qlcnic_add_lb_filter(adapter, skb, is_lb_pkt, t_vid); -- cgit v0.10.2 From 1f0f467b670eec101419a2a1235e315e4324ea07 Mon Sep 17 00:00:00 2001 From: Harish Patil Date: Fri, 25 Apr 2014 17:43:57 -0400 Subject: qlcnic: Add hwmon interface to export board temperature. Signed-off-by: Harish Patil Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig index c14bd31..b818432 100644 --- a/drivers/net/ethernet/qlogic/Kconfig +++ b/drivers/net/ethernet/qlogic/Kconfig @@ -66,6 +66,17 @@ config QLCNIC_VXLAN Say Y here if you want to enable hardware offload support for Virtual eXtensible Local Area Network (VXLAN) in the driver. +config QLCNIC_HWMON + bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support" + depends on QLCNIC && HWMON + default y + ---help--- + This configuration parameter can be used to read the + board temperature in Converged Ethernet devices + supported by qlcnic. + + This data is available via the hwmon sysfs interface. + config QLGE tristate "QLogic QLGE 10Gb Ethernet Driver Support" depends on PCI diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 7b52a88..381da04 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -537,6 +537,7 @@ struct qlcnic_hardware_context { u8 phys_port_id[ETH_ALEN]; u8 lb_mode; u16 vxlan_port; + struct device *hwmon_dev; }; struct qlcnic_adapter_stats { @@ -2361,4 +2362,18 @@ static inline u32 qlcnic_get_vnic_func_count(struct qlcnic_adapter *adapter) else return QLC_DEFAULT_VNIC_COUNT; } + +#ifdef CONFIG_QLCNIC_HWMON +void qlcnic_register_hwmon_dev(struct qlcnic_adapter *); +void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *); +#else +static inline void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter) +{ + return; +} +static inline void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter) +{ + return; +} +#endif #endif /* __QLCNIC_H_ */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 73f908a..19878fb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2593,7 +2593,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) qlcnic_alloc_lb_filters_mem(adapter); qlcnic_add_sysfs(adapter); - + qlcnic_register_hwmon_dev(adapter); return 0; err_out_disable_mbx_intr: @@ -2700,6 +2700,8 @@ static void qlcnic_remove(struct pci_dev *pdev) qlcnic_remove_sysfs(adapter); + qlcnic_unregister_hwmon_dev(adapter); + qlcnic_cleanup_pci_map(adapter->ahw); qlcnic_release_firmware(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index cd346e2..eee5fc9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -19,6 +19,10 @@ #include #include #include +#ifdef CONFIG_QLCNIC_HWMON +#include +#include +#endif #define QLC_STATUS_UNSUPPORTED_CMD -2 @@ -1243,6 +1247,68 @@ static struct bin_attribute bin_attr_flash = { .write = qlcnic_83xx_sysfs_flash_write_handler, }; +#ifdef CONFIG_QLCNIC_HWMON + +static ssize_t qlcnic_hwmon_show_temp(struct device *dev, + struct device_attribute *dev_attr, + char *buf) +{ + struct qlcnic_adapter *adapter = dev_get_drvdata(dev); + unsigned int temperature = 0, value = 0; + + if (qlcnic_83xx_check(adapter)) + value = QLCRDX(adapter->ahw, QLC_83XX_ASIC_TEMP); + else if (qlcnic_82xx_check(adapter)) + value = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP); + + temperature = qlcnic_get_temp_val(value); + /* display millidegree celcius */ + temperature *= 1000; + return sprintf(buf, "%u\n", temperature); +} + +/* hwmon-sysfs attributes */ +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + qlcnic_hwmon_show_temp, NULL, 1); + +static struct attribute *qlcnic_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +ATTRIBUTE_GROUPS(qlcnic_hwmon); + +void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter) +{ + struct device *dev = &adapter->pdev->dev; + struct device *hwmon_dev; + + /* Skip hwmon registration for a VF device */ + if (qlcnic_sriov_vf_check(adapter)) { + adapter->ahw->hwmon_dev = NULL; + return; + } + hwmon_dev = hwmon_device_register_with_groups(dev, qlcnic_driver_name, + adapter, + qlcnic_hwmon_groups); + if (IS_ERR(hwmon_dev)) { + dev_err(dev, "Cannot register with hwmon, err=%ld\n", + PTR_ERR(hwmon_dev)); + hwmon_dev = NULL; + } + adapter->ahw->hwmon_dev = hwmon_dev; +} + +void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter) +{ + struct device *hwmon_dev = adapter->ahw->hwmon_dev; + if (hwmon_dev) { + hwmon_device_unregister(hwmon_dev); + adapter->ahw->hwmon_dev = NULL; + } +} +#endif + void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; -- cgit v0.10.2 From 868e9144314a00f04ee30ab1288338e510b4cf3a Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 25 Apr 2014 17:43:58 -0400 Subject: qlcnic: Allow setting TX interrupt coalescing parameters from VF. o Tx interrupt coalescing parameters can now be set from VF. o Added validation code in PF to validate the parameters. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 19878fb..5ceff47 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2052,6 +2052,7 @@ out: static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter) { + struct qlcnic_hardware_context *ahw = adapter->ahw; int err = 0; adapter->recv_ctx = kzalloc(sizeof(struct qlcnic_recv_context), @@ -2061,6 +2062,18 @@ static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter) goto err_out; } + if (qlcnic_83xx_check(adapter)) { + ahw->coal.type = QLCNIC_INTR_COAL_TYPE_RX_TX; + ahw->coal.tx_time_us = QLCNIC_DEF_INTR_COALESCE_TX_TIME_US; + ahw->coal.tx_packets = QLCNIC_DEF_INTR_COALESCE_TX_PACKETS; + ahw->coal.rx_time_us = QLCNIC_DEF_INTR_COALESCE_RX_TIME_US; + ahw->coal.rx_packets = QLCNIC_DEF_INTR_COALESCE_RX_PACKETS; + } else { + ahw->coal.type = QLCNIC_INTR_COAL_TYPE_RX; + ahw->coal.rx_time_us = QLCNIC_DEF_INTR_COALESCE_RX_TIME_US; + ahw->coal.rx_packets = QLCNIC_DEF_INTR_COALESCE_RX_PACKETS; + } + /* clear stats */ memset(&adapter->stats, 0, sizeof(adapter->stats)); err_out: diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 2801379..c7926ce 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -16,6 +16,7 @@ #define QLC_VF_FLOOD_BIT BIT_16 #define QLC_FLOOD_MODE 0x5 #define QLC_SRIOV_ALLOW_VLAN0 BIT_19 +#define QLC_INTR_COAL_TYPE_MASK 0x7 static int qlcnic_sriov_pf_get_vport_handle(struct qlcnic_adapter *, u8); @@ -1178,19 +1179,41 @@ static int qlcnic_sriov_validate_cfg_intrcoal(struct qlcnic_adapter *adapter, { struct qlcnic_nic_intr_coalesce *coal = &adapter->ahw->coal; u16 ctx_id, pkts, time; + int err = -EINVAL; + u8 type; + type = cmd->req.arg[1] & QLC_INTR_COAL_TYPE_MASK; ctx_id = cmd->req.arg[1] >> 16; pkts = cmd->req.arg[2] & 0xffff; time = cmd->req.arg[2] >> 16; - if (ctx_id != vf->rx_ctx_id) - return -EINVAL; - if (pkts > coal->rx_packets) - return -EINVAL; - if (time < coal->rx_time_us) - return -EINVAL; + switch (type) { + case QLCNIC_INTR_COAL_TYPE_RX: + if (ctx_id != vf->rx_ctx_id || pkts > coal->rx_packets || + time < coal->rx_time_us) + goto err_label; + break; + case QLCNIC_INTR_COAL_TYPE_TX: + if (ctx_id != vf->tx_ctx_id || pkts > coal->tx_packets || + time < coal->tx_time_us) + goto err_label; + break; + default: + netdev_err(adapter->netdev, "Invalid coalescing type 0x%x received\n", + type); + return err; + } return 0; + +err_label: + netdev_err(adapter->netdev, "Expected: rx_ctx_id 0x%x rx_packets 0x%x rx_time_us 0x%x tx_ctx_id 0x%x tx_packets 0x%x tx_time_us 0x%x\n", + vf->rx_ctx_id, coal->rx_packets, coal->rx_time_us, + vf->tx_ctx_id, coal->tx_packets, coal->tx_time_us); + netdev_err(adapter->netdev, "Received: ctx_id 0x%x packets 0x%x time_us 0x%x type 0x%x\n", + ctx_id, pkts, time, type); + + return err; } static int qlcnic_sriov_pf_cfg_intrcoal_cmd(struct qlcnic_bc_trans *tran, -- cgit v0.10.2 From c65762fc2fc8a85c3d8a2024c17815e1a0f5dff0 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 25 Apr 2014 17:43:59 -0400 Subject: qlcnic: Add driver logs in error path. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index b7cffb4..4ea15ba 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -879,6 +879,9 @@ int qlcnic_83xx_alloc_mbx_args(struct qlcnic_cmd_args *mbx, return 0; } } + + dev_err(&adapter->pdev->dev, "%s: Invalid mailbox command opcode 0x%x\n", + __func__, type); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index ba20c72..34d2737 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -2181,6 +2181,8 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) max_sds_rings = QLCNIC_MAX_SDS_RINGS; max_tx_rings = QLCNIC_MAX_TX_RINGS; } else { + dev_err(&adapter->pdev->dev, "%s: Invalid opmode %d\n", + __func__, ret); return -EIO; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index c1e11f5..304e247 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -1027,8 +1027,11 @@ int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id, u32 arg1; if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC || - !(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE)) + !(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE)) { + dev_err(&adapter->pdev->dev, "%s: Not a management function\n", + __func__); return err; + } arg1 = id | (enable_mirroring ? BIT_4 : 0); arg1 |= pci_func << 8; @@ -1318,8 +1321,12 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter, u32 arg1, arg2 = 0; u8 pci_func; - if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) + if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) { + dev_err(&adapter->pdev->dev, "%s: Not a management function\n", + __func__); return err; + } + pci_func = esw_cfg->pci_func; index = qlcnic_is_valid_nic_func(adapter, pci_func); if (index < 0) @@ -1363,6 +1370,8 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter, arg1 &= ~(0x0ffff << 16); break; default: + dev_err(&adapter->pdev->dev, "%s: Invalid opmode 0x%x\n", + __func__, esw_cfg->op_mode); return err; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 5ceff47..f2c9a19 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1014,6 +1014,8 @@ int qlcnic_init_pci_info(struct qlcnic_adapter *adapter) if (pfn >= ahw->max_vnic_func) { ret = QL_STATUS_INVALID_PARAM; + dev_err(&adapter->pdev->dev, "%s: Invalid function 0x%x, max 0x%x\n", + __func__, pfn, ahw->max_vnic_func); goto err_eswitch; } @@ -2531,8 +2533,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n"); goto err_out_free_hw; default: - dev_err(&pdev->dev, "Adapter initialization failed. A reboot may be required to recover from this failure\n"); - dev_err(&pdev->dev, "If reboot does not help to recover from this failure, try a flash update of the adapter\n"); + dev_err(&pdev->dev, "Adapter initialization failed. Driver will load in maintenance mode to recover the adapter using the application\n"); goto err_out_maintenance_mode; } } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index eee5fc9..f5786d5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -362,6 +362,8 @@ int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func) if (adapter->npars[i].pci_func == pci_func) return i; } + + dev_err(&adapter->pdev->dev, "%s: Invalid nic function\n", __func__); return -EINVAL; } -- cgit v0.10.2 From aaecf51cf31160262b29a6d50f364f4a76c7ed1e Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 25 Apr 2014 17:44:00 -0400 Subject: qlcnic: Limit vNIC support in legacy interrupt mode o When the driver loads in legacy interrupt mode, only vNICs with PCI function number 0-7 are supported. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 4ea15ba..7c125d7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -33,6 +33,7 @@ static void qlcnic_83xx_get_beacon_state(struct qlcnic_adapter *); #define RSS_HASHTYPE_IP_TCP 0x3 #define QLC_83XX_FW_MBX_CMD 0 #define QLC_SKIP_INACTIVE_PCI_REGS 7 +#define QLC_MAX_LEGACY_FUNC_SUPP 8 static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = { {QLCNIC_CMD_CONFIGURE_IP_ADDR, 6, 1}, @@ -357,8 +358,15 @@ int qlcnic_83xx_setup_intr(struct qlcnic_adapter *adapter) if (!ahw->intr_tbl) return -ENOMEM; - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) + if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { + if (adapter->ahw->pci_func >= QLC_MAX_LEGACY_FUNC_SUPP) { + dev_err(&adapter->pdev->dev, "PCI function number 8 and higher are not supported with legacy interrupt, func 0x%x\n", + ahw->pci_func); + return -EOPNOTSUPP; + } + qlcnic_83xx_enable_legacy(adapter); + } for (i = 0; i < num_msix; i++) { if (adapter->flags & QLCNIC_MSIX_ENABLED) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f2c9a19..7023d35 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2532,6 +2532,9 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case -ENOMEM: dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n"); goto err_out_free_hw; + case -EOPNOTSUPP: + dev_err(&pdev->dev, "Adapter initialization failed\n"); + goto err_out_free_hw; default: dev_err(&pdev->dev, "Adapter initialization failed. Driver will load in maintenance mode to recover the adapter using the application\n"); goto err_out_maintenance_mode; -- cgit v0.10.2 From d73657440976f908f71f2a1f8bfd03990a2acb66 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 25 Apr 2014 17:44:01 -0400 Subject: qlcnic: Update version to 5.3.58 Signed-off-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 381da04..09fe9c2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -39,8 +39,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 3 -#define _QLCNIC_LINUX_SUBVERSION 57 -#define QLCNIC_LINUX_VERSIONID "5.3.57" +#define _QLCNIC_LINUX_SUBVERSION 58 +#define QLCNIC_LINUX_VERSIONID "5.3.58" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2