From 0093380c18a4bfc5526577da576335d08bdea2e5 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Mon, 11 Nov 2013 10:42:36 +0100 Subject: regmap: trivial comment fix (copy'n'paste error) fix a trivial copy'n'paste error in the regmap kerneldoc, s/write/read/ for the regmap_read(), regmap_raw_read() and regmap_bulk_read() routines Signed-off-by: Gerhard Sittig Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 9c021d9..f441084 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1743,7 +1743,7 @@ static int _regmap_read(struct regmap *map, unsigned int reg, /** * regmap_read(): Read a value from a single register * - * @map: Register map to write to + * @map: Register map to read from * @reg: Register to be read from * @val: Pointer to store read value * @@ -1770,7 +1770,7 @@ EXPORT_SYMBOL_GPL(regmap_read); /** * regmap_raw_read(): Read raw data from the device * - * @map: Register map to write to + * @map: Register map to read from * @reg: First register to be read from * @val: Pointer to store read value * @val_len: Size of data to read @@ -1882,7 +1882,7 @@ EXPORT_SYMBOL_GPL(regmap_fields_read); /** * regmap_bulk_read(): Read multiple registers from the device * - * @map: Register map to write to + * @map: Register map to read from * @reg: First register to be read from * @val: Pointer to store read value, in native register size for device * @val_count: Number of registers to read -- cgit v0.10.2 From 5dd8c4c3f18b2ebf3f5303c7c273396441db6c6c Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Fri, 8 Nov 2013 10:20:06 -0800 Subject: drm/i915/bdw: Add BDW to ULT macro For what we care about ULT and ULX are interchangeable. We know of 3 types of pciids for these cases. I am not sure if at some point we will need to distinguish ULT and ULX. Cc: Paulo Zanoni Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8600c31..51951ef 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1755,8 +1755,13 @@ struct drm_i915_file_private { #define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) #define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \ ((dev)->pdev->device & 0xFF00) == 0x0C00) -#define IS_ULT(dev) (IS_HASWELL(dev) && \ +#define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \ + (((dev)->pdev->device & 0xf) == 0x2 || \ + ((dev)->pdev->device & 0xf) == 0x6 || \ + ((dev)->pdev->device & 0xf) == 0xe)) +#define IS_HSW_ULT(dev) (IS_HASWELL(dev) && \ ((dev)->pdev->device & 0xFF00) == 0x0A00) +#define IS_ULT(dev) (IS_HSW_ULT(dev) || IS_BDW_ULT(dev)) #define IS_HSW_GT3(dev) (IS_HASWELL(dev) && \ ((dev)->pdev->device & 0x00F0) == 0x0020) #define IS_PRELIMINARY_HW(intel_info) ((intel_info)->is_preliminary) -- cgit v0.10.2 From f8e100621b072384ec1180563d933e86e2f7e2d5 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 11 Nov 2013 11:12:57 +0200 Subject: drm/i915/bdw: GEN8 backlight support Prior to Haswell the CPU control register for backlight (BLC_PWM_CPU_CTL) toggled the PCH baclight pin for us. This made some sense as there was no pin on the CPU. With Haswell came the introduction of a CPU backlight pin, but the interface was still controlled by software with the same mechnism. Behind the scenes, hardware did all the dirty work for us. Broadwell no longer provides this for free. If we want to use the PCH backlight pin [1] then we have to set the override bit BLC_PWM_PCH_CTL1 and program BLC_PWM_PCH_CTL2 for the PWM values. This patch implements that. This patch is compile tested only, and given that I rarely if ever touch this code, careful review is welcome. [1] According to Art, we know of no devices that exist which use the CPU pin (and remember it has existed already on HSW). If such a device does exist, we'll have to handle it properly - this is left as TODO until then. v2: Drop the abstraction prep patch, as a bigger backlight overhaul is in the works, and do just the mimimal bdw enabling now. (by Jani) CC: Art Runyan Signed-off-by: Ben Widawsky Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index f161ac0..e6f782d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -451,7 +451,9 @@ static u32 intel_panel_get_backlight(struct drm_device *dev, spin_lock_irqsave(&dev_priv->backlight.lock, flags); - if (HAS_PCH_SPLIT(dev)) { + if (IS_BROADWELL(dev)) { + val = I915_READ(BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK; + } else if (HAS_PCH_SPLIT(dev)) { val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; } else { if (IS_VALLEYVIEW(dev)) @@ -479,6 +481,13 @@ static u32 intel_panel_get_backlight(struct drm_device *dev, return val; } +static void intel_bdw_panel_set_backlight(struct drm_device *dev, u32 level) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 val = I915_READ(BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_PCH_CTL2, val | level); +} + static void intel_pch_panel_set_backlight(struct drm_device *dev, u32 level) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -496,7 +505,9 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); level = intel_panel_compute_brightness(dev, pipe, level); - if (HAS_PCH_SPLIT(dev)) + if (IS_BROADWELL(dev)) + return intel_bdw_panel_set_backlight(dev, level); + else if (HAS_PCH_SPLIT(dev)) return intel_pch_panel_set_backlight(dev, level); if (is_backlight_combination_mode(dev)) { @@ -666,7 +677,16 @@ void intel_panel_enable_backlight(struct intel_connector *connector) POSTING_READ(reg); I915_WRITE(reg, tmp | BLM_PWM_ENABLE); - if (HAS_PCH_SPLIT(dev) && + if (IS_BROADWELL(dev)) { + /* + * Broadwell requires PCH override to drive the PCH + * backlight pin. The above will configure the CPU + * backlight pin, which we don't plan to use. + */ + tmp = I915_READ(BLC_PWM_PCH_CTL1); + tmp |= BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE; + I915_WRITE(BLC_PWM_PCH_CTL1, tmp); + } else if (HAS_PCH_SPLIT(dev) && !(dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)) { tmp = I915_READ(BLC_PWM_PCH_CTL1); tmp |= BLM_PCH_PWM_ENABLE; -- cgit v0.10.2 From 935e8de97564a1ea22c3bb30ca2b20b12af7cbfb Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 7 Nov 2013 21:40:47 -0800 Subject: drm/i915/bdw: Do gen6 style reset for gen8 This patch existed before, but was lost over time. Note that reset is still somewhat problematic in my limited testing (ie. module_reload will not pass) but it can be disabled with a module parameter, and support should be considered preliminary anyway. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index f9883ce..6a4f9b6 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -782,6 +782,7 @@ static int gen6_do_reset(struct drm_device *dev) int intel_gpu_reset(struct drm_device *dev) { switch (INTEL_INFO(dev)->gen) { + case 8: case 7: case 6: return gen6_do_reset(dev); case 5: return ironlake_do_reset(dev); -- cgit v0.10.2 From 230f955f73074ec5b1b4389f3f26152eebf54404 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 7 Nov 2013 21:40:48 -0800 Subject: drm/i915/bdw: Free correct number of ppgtt pages I am unclear how this got messed up in the shuffle, but it did. Cc: Imre Deak Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 3620a1b..5a3cc31 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -335,8 +335,8 @@ static void gen8_ppgtt_cleanup(struct i915_address_space *vm) kfree(ppgtt->gen8_pt_dma_addr[i]); } - __free_pages(ppgtt->gen8_pt_pages, ppgtt->num_pt_pages << PAGE_SHIFT); - __free_pages(ppgtt->pd_pages, ppgtt->num_pd_pages << PAGE_SHIFT); + __free_pages(ppgtt->gen8_pt_pages, get_order(ppgtt->num_pt_pages << PAGE_SHIFT)); + __free_pages(ppgtt->pd_pages, get_order(ppgtt->num_pd_pages << PAGE_SHIFT)); } /** -- cgit v0.10.2 From eb0d4b75d506050cb369df467b93b92360f5acaf Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 7 Nov 2013 21:40:50 -0800 Subject: drm/i915/bdw: Add comment about gen8 HWS PGA This confused me some many times that I think it is appropriate to add a small comment to instruct the reader of the code that it is indeed doing what it is supposed to do. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index b620337..c2f09d45 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -965,6 +965,7 @@ void intel_ring_setup_status_page(struct intel_ring_buffer *ring) } else if (IS_GEN6(ring->dev)) { mmio = RING_HWS_PGA_GEN6(ring->mmio_base); } else { + /* XXX: gen8 returns to sanity */ mmio = RING_HWS_PGA(ring->mmio_base); } -- cgit v0.10.2 From 3a2ffb65eec6dbda2fd8151894f51c18b42c8d41 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 7 Nov 2013 21:40:51 -0800 Subject: drm/i915/bdw: Limit GTT to 2GB Because of the way in which we're allocating the pages for the Aliasing PPGTT, we cannot actually successfully alloc enough space for anything greater than 2GB. Instead of a quick hack to fix this, we should defer until we have the real solution in place (allocating much less contiguous space). This wasn't found sooner because we didn't not have any systems supporting more than a 2GB GTT. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 5a3cc31..f69bdc7 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1239,6 +1239,11 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl) bdw_gmch_ctl &= BDW_GMCH_GGMS_MASK; if (bdw_gmch_ctl) bdw_gmch_ctl = 1 << bdw_gmch_ctl; + if (bdw_gmch_ctl > 4) { + WARN_ON(!i915_preliminary_hw_support); + return 4<<20; + } + return bdw_gmch_ctl << 20; } -- cgit v0.10.2 From 596cc11e7a4a89bf6c45f955402d0bd0c7d51f13 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 11 Nov 2013 14:46:28 -0800 Subject: drm/i915/bdw: PIPE_[BC] I[ME]R moved to powerwell The pipe B and pipe C interrupt mask and enable registers are now part of the pipe, so disabling the pipe power wells will lost the contests of the registers. Art totally debugged this one! v2: Use the irq_lock to clarify code, and prevent future bugs (Daniel) Cc: Art Runyan Cc: Paulo Zanoni Signed-off-by: Ben Widawsky [danvet: Make sparse happy.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 0a07d7c..33a8dbe 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5684,6 +5684,7 @@ static void __intel_set_power_well(struct drm_device *dev, bool enable) { struct drm_i915_private *dev_priv = dev->dev_private; bool is_enabled, enable_requested; + unsigned long irqflags; uint32_t tmp; tmp = I915_READ(HSW_PWR_WELL_DRIVER); @@ -5701,9 +5702,24 @@ static void __intel_set_power_well(struct drm_device *dev, bool enable) HSW_PWR_WELL_STATE_ENABLED), 20)) DRM_ERROR("Timeout enabling power well\n"); } + + if (IS_BROADWELL(dev)) { + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_B), + dev_priv->de_irq_mask[PIPE_B]); + I915_WRITE(GEN8_DE_PIPE_IER(PIPE_B), + ~dev_priv->de_irq_mask[PIPE_B] | + GEN8_PIPE_VBLANK); + I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_C), + dev_priv->de_irq_mask[PIPE_C]); + I915_WRITE(GEN8_DE_PIPE_IER(PIPE_C), + ~dev_priv->de_irq_mask[PIPE_C] | + GEN8_PIPE_VBLANK); + POSTING_READ(GEN8_DE_PIPE_IER(PIPE_C)); + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + } } else { if (enable_requested) { - unsigned long irqflags; enum pipe p; I915_WRITE(HSW_PWR_WELL_DRIVER, 0); -- cgit v0.10.2 From 718822c1c112dc99e0c72c8968ee1db9d9d910f0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 15 Nov 2013 16:12:20 -0500 Subject: dm delay: fix a possible deadlock due to shared workqueue The dm-delay target uses a shared workqueue for multiple instances. This can cause deadlock if two or more dm-delay targets are stacked on the top of each other. This patch changes dm-delay to use a per-instance workqueue. Cc: stable@vger.kernel.org # 2.6.22+ Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 496d5f3..2f91d6d 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -20,6 +20,7 @@ struct delay_c { struct timer_list delay_timer; struct mutex timer_lock; + struct workqueue_struct *kdelayd_wq; struct work_struct flush_expired_bios; struct list_head delayed_bios; atomic_t may_delay; @@ -45,14 +46,13 @@ struct dm_delay_info { static DEFINE_MUTEX(delayed_bios_lock); -static struct workqueue_struct *kdelayd_wq; static struct kmem_cache *delayed_cache; static void handle_delayed_timer(unsigned long data) { struct delay_c *dc = (struct delay_c *)data; - queue_work(kdelayd_wq, &dc->flush_expired_bios); + queue_work(dc->kdelayd_wq, &dc->flush_expired_bios); } static void queue_timeout(struct delay_c *dc, unsigned long expires) @@ -191,6 +191,12 @@ out: goto bad_dev_write; } + dc->kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); + if (!dc->kdelayd_wq) { + DMERR("Couldn't start kdelayd"); + goto bad_queue; + } + setup_timer(&dc->delay_timer, handle_delayed_timer, (unsigned long)dc); INIT_WORK(&dc->flush_expired_bios, flush_expired_bios); @@ -203,6 +209,8 @@ out: ti->private = dc; return 0; +bad_queue: + mempool_destroy(dc->delayed_pool); bad_dev_write: if (dc->dev_write) dm_put_device(ti, dc->dev_write); @@ -217,7 +225,7 @@ static void delay_dtr(struct dm_target *ti) { struct delay_c *dc = ti->private; - flush_workqueue(kdelayd_wq); + destroy_workqueue(dc->kdelayd_wq); dm_put_device(ti, dc->dev_read); @@ -350,12 +358,6 @@ static int __init dm_delay_init(void) { int r = -ENOMEM; - kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); - if (!kdelayd_wq) { - DMERR("Couldn't start kdelayd"); - goto bad_queue; - } - delayed_cache = KMEM_CACHE(dm_delay_info, 0); if (!delayed_cache) { DMERR("Couldn't create delayed bio cache."); @@ -373,8 +375,6 @@ static int __init dm_delay_init(void) bad_register: kmem_cache_destroy(delayed_cache); bad_memcache: - destroy_workqueue(kdelayd_wq); -bad_queue: return r; } @@ -382,7 +382,6 @@ static void __exit dm_delay_exit(void) { dm_unregister_target(&delay_target); kmem_cache_destroy(delayed_cache); - destroy_workqueue(kdelayd_wq); } /* Module hooks */ -- cgit v0.10.2 From d689fe222a858c767cb8594faf280048e532b53f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 13 Nov 2013 21:01:57 +0100 Subject: NOHZ: Check for nohz active instead of nohz enabled RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead Signed-off-by: Thomas Gleixner Reviewed-by: Steven Rostedt Reviewed-by: Paul E. McKenney Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 6abb03d..08a7652 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -1632,7 +1632,7 @@ module_param(rcu_idle_gp_delay, int, 0644); static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; module_param(rcu_idle_lazy_gp_delay, int, 0644); -extern int tick_nohz_enabled; +extern int tick_nohz_active; /* * Try to advance callbacks for all flavors of RCU on the current CPU, but @@ -1729,7 +1729,7 @@ static void rcu_prepare_for_idle(int cpu) int tne; /* Handle nohz enablement switches conservatively. */ - tne = ACCESS_ONCE(tick_nohz_enabled); + tne = ACCESS_ONCE(tick_nohz_active); if (tne != rdtp->tick_nohz_enabled_snap) { if (rcu_cpu_has_callbacks(cpu, NULL)) invoke_rcu_core(); /* force nohz to see update. */ diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 3612fc7..a12df5a 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -361,8 +361,8 @@ void __init tick_nohz_init(void) /* * NO HZ enabled ? */ -int tick_nohz_enabled __read_mostly = 1; - +static int tick_nohz_enabled __read_mostly = 1; +int tick_nohz_active __read_mostly; /* * Enable / Disable tickless mode */ @@ -465,7 +465,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, idle; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -506,7 +506,7 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, iowait; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -799,11 +799,6 @@ void tick_nohz_idle_enter(void) local_irq_disable(); ts = &__get_cpu_var(tick_cpu_sched); - /* - * set ts->inidle unconditionally. even if the system did not - * switch to nohz mode the cpu frequency governers rely on the - * update of the idle time accounting in tick_nohz_start_idle(). - */ ts->inidle = 1; __tick_nohz_idle_enter(ts); @@ -973,7 +968,7 @@ static void tick_nohz_switch_to_nohz(void) struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); ktime_t next; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return; local_irq_disable(); @@ -981,7 +976,7 @@ static void tick_nohz_switch_to_nohz(void) local_irq_enable(); return; } - + tick_nohz_active = 1; ts->nohz_mode = NOHZ_MODE_LOWRES; /* @@ -1139,8 +1134,10 @@ void tick_setup_sched_timer(void) } #ifdef CONFIG_NO_HZ_COMMON - if (tick_nohz_enabled) + if (tick_nohz_enabled) { ts->nohz_mode = NOHZ_MODE_HIGHRES; + tick_nohz_active = 1; + } #endif } #endif /* HIGH_RES_TIMERS */ -- cgit v0.10.2 From da554eba2e68c8ec051977db5ee1f42d384a01ed Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 15 Nov 2013 14:15:31 -0800 Subject: timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner diff --git a/kernel/timer.c b/kernel/timer.c index 6582b82..accfd24 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1518,9 +1518,8 @@ static int init_timers_cpu(int cpu) /* * The APs use this path later in boot */ - base = kmalloc_node(sizeof(*base), - GFP_KERNEL | __GFP_ZERO, - cpu_to_node(cpu)); + base = kzalloc_node(sizeof(*base), GFP_KERNEL, + cpu_to_node(cpu)); if (!base) return -ENOMEM; -- cgit v0.10.2 From 050ded1bbaea3331745cf2782315f5bc2582d083 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 15 Nov 2013 14:15:33 -0800 Subject: tick: Document tick_do_timer_cpu Taken straight from a tglx email ;) Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 64522ec..162b03a 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -33,6 +33,21 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); */ ktime_t tick_next_period; ktime_t tick_period; + +/* + * tick_do_timer_cpu is a timer core internal variable which holds the CPU NR + * which is responsible for calling do_timer(), i.e. the timekeeping stuff. This + * variable has two functions: + * + * 1) Prevent a thundering herd issue of a gazillion of CPUs trying to grab the + * timekeeping lock all at once. Only the CPU which is assigned to do the + * update is handling it. + * + * 2) Hand off the duty in the NOHZ idle case by setting the value to + * TICK_DO_TIMER_NONE, i.e. a non existing CPU. So the next cpu which looks + * at it will take over and keep the time keeping alive. The handover + * procedure also covers cpu hotplug. + */ int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT; /* -- cgit v0.10.2 From 694e096fd7c2a7d40760fc9c9dfc826bdd495ea4 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 13 Nov 2013 12:29:08 -0500 Subject: NFS: Enabling v4.2 should not recompile nfsd and lockd When CONFIG_NFS_V4_2 is toggled nfsd and lockd will be recompiled, instead of only the nfs client. This patch moves a small amount of code into the client directory to avoid unnecessary recompiles. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust diff --git a/fs/nfs/blocklayout/blocklayout.h b/fs/nfs/blocklayout/blocklayout.h index 8485978..9838fb0 100644 --- a/fs/nfs/blocklayout/blocklayout.h +++ b/fs/nfs/blocklayout/blocklayout.h @@ -36,6 +36,7 @@ #include #include +#include "../nfs4_fs.h" #include "../pnfs.h" #include "../netns.h" diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c index fc0f95e..d25f10f 100644 --- a/fs/nfs/dns_resolve.c +++ b/fs/nfs/dns_resolve.c @@ -46,7 +46,9 @@ ssize_t nfs_dns_resolve_name(struct net *net, char *name, size_t namelen, #include #include #include +#include +#include "nfs4_fs.h" #include "dns_resolve.h" #include "cache_lib.h" #include "netns.h" diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index bca6a3e..8b5cc04 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -269,6 +269,21 @@ extern const u32 nfs41_maxgetdevinfo_overhead; extern struct rpc_procinfo nfs4_procedures[]; #endif +#ifdef CONFIG_NFS_V4_SECURITY_LABEL +extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); +static inline void nfs4_label_free(struct nfs4_label *label) +{ + if (label) { + kfree(label->label); + kfree(label); + } + return; +} +#else +static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } +static inline void nfs4_label_free(void *label) {} +#endif /* CONFIG_NFS_V4_SECURITY_LABEL */ + /* proc.c */ void nfs_close_context(struct nfs_open_context *ctx, int is_sync); extern struct nfs_client *nfs_init_client(struct nfs_client *clp, diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 3ce79b0..5609edc 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -9,6 +9,14 @@ #ifndef __LINUX_FS_NFS_NFS4_FS_H #define __LINUX_FS_NFS_NFS4_FS_H +#if defined(CONFIG_NFS_V4_2) +#define NFS4_MAX_MINOR_VERSION 2 +#elif defined(CONFIG_NFS_V4_1) +#define NFS4_MAX_MINOR_VERSION 1 +#else +#define NFS4_MAX_MINOR_VERSION 0 +#endif + #if IS_ENABLED(CONFIG_NFS_V4) #define NFS4_MAX_LOOP_ON_RECOVER (10) diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index c6f41b6..ddd8487 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -410,16 +410,6 @@ enum lock_type4 { #define NFS4_VERSION 4 #define NFS4_MINOR_VERSION 0 -#if defined(CONFIG_NFS_V4_2) -#define NFS4_MAX_MINOR_VERSION 2 -#else -#if defined(CONFIG_NFS_V4_1) -#define NFS4_MAX_MINOR_VERSION 1 -#else -#define NFS4_MAX_MINOR_VERSION 0 -#endif /* CONFIG_NFS_V4_1 */ -#endif /* CONFIG_NFS_V4_2 */ - #define NFS4_DEBUG 1 /* Index of predefined Linux client operations */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 14a4820..4899737 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -507,24 +507,6 @@ extern int nfs_mountpoint_expiry_timeout; extern void nfs_release_automount_timer(void); /* - * linux/fs/nfs/nfs4proc.c - */ -#ifdef CONFIG_NFS_V4_SECURITY_LABEL -extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); -static inline void nfs4_label_free(struct nfs4_label *label) -{ - if (label) { - kfree(label->label); - kfree(label); - } - return; -} -#else -static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } -static inline void nfs4_label_free(void *label) {} -#endif - -/* * linux/fs/nfs/unlink.c */ extern void nfs_complete_unlink(struct dentry *dentry, struct inode *); -- cgit v0.10.2 From 829e57d7c590832caad04355b044667902194f6a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 Nov 2013 14:33:50 -0500 Subject: NFS: Fix a warning in nfs_setsecurity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warning: linux-nfs/fs/nfs/inode.c:315:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 18ab2da..00ad1c2 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -312,7 +312,7 @@ struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) } EXPORT_SYMBOL_GPL(nfs4_label_alloc); #else -void inline nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, +void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, struct nfs4_label *label) { } -- cgit v0.10.2 From 4a82fd7c4e78a1b7a224f9ae8bb7e1fd95f670e0 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 15 Nov 2013 16:36:16 -0500 Subject: NFSv4 wait on recovery for async session errors When the state manager is processing the NFS4CLNT_DELEGRETURN flag, session draining is off, but DELEGRETURN can still get a session error. The async handler calls nfs4_schedule_session_recovery returns -EAGAIN, and the DELEGRETURN done then restarts the RPC task in the prepare state. With the state manager still processing the NFS4CLNT_DELEGRETURN flag with session draining off, these DELEGRETURNs will cycle with errors filling up the session slots. This prevents OPEN reclaims (from nfs_delegation_claim_opens) required by the NFS4CLNT_DELEGRETURN state manager processing from completing, hanging the state manager in the __rpc_wait_for_completion_task in nfs4_run_open_task as seen in this kernel thread dump: kernel: 4.12.32.53-ma D 0000000000000000 0 3393 2 0x00000000 kernel: ffff88013995fb60 0000000000000046 ffff880138cc5400 ffff88013a9df140 kernel: ffff8800000265c0 ffffffff8116eef0 ffff88013fc10080 0000000300000001 kernel: ffff88013a4ad058 ffff88013995ffd8 000000000000fbc8 ffff88013a4ad058 kernel: Call Trace: kernel: [] ? cache_alloc_refill+0x1c0/0x240 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] rpc_wait_bit_killable+0x42/0xa0 [sunrpc] kernel: [] __wait_on_bit+0x5f/0x90 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] out_of_line_wait_on_bit+0x78/0x90 kernel: [] ? wake_bit_function+0x0/0x50 kernel: [] __rpc_wait_for_completion_task+0x2d/0x30 [sunrpc] kernel: [] nfs4_run_open_task+0x11c/0x160 [nfs] kernel: [] nfs4_open_recover_helper+0x87/0x120 [nfs] kernel: [] nfs4_open_recover+0xc6/0x150 [nfs] kernel: [] ? nfs4_open_recoverdata_alloc+0x2f/0x60 [nfs] kernel: [] nfs4_open_delegation_recall+0x6a/0xa0 [nfs] kernel: [] nfs_end_delegation_return+0x120/0x2e0 [nfs] kernel: [] ? queue_work+0x1f/0x30 kernel: [] nfs_client_return_marked_delegations+0xd7/0x110 [nfs] kernel: [] nfs4_run_state_manager+0x548/0x620 [nfs] kernel: [] ? nfs4_run_state_manager+0x0/0x620 [nfs] kernel: [] kthread+0x96/0xa0 kernel: [] child_rip+0xa/0x20 kernel: [] ? kthread+0x0/0xa0 kernel: [] ? child_rip+0x0/0x20 The state manager can not therefore process the DELEGRETURN session errors. Change the async handler to wait for recovery on session errors. Signed-off-by: Andy Adamson Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5ab33c0..1f4edfb 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4803,7 +4803,7 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, dprintk("%s ERROR %d, Reset session\n", __func__, task->tk_status); nfs4_schedule_session_recovery(clp->cl_session, task->tk_status); - goto restart_call; + goto wait_on_recovery; #endif /* CONFIG_NFS_V4_1 */ case -NFS4ERR_DELAY: nfs_inc_server_stats(server, NFSIOS_DELAY); -- cgit v0.10.2 From c97cf606e43b85a6cf158b810375dd77312024db Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 19 Nov 2013 16:34:14 -0500 Subject: NFSv4: Update list of irrecoverable errors on DELEGRETURN If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID then there is no recovery possible. Just quit without returning an error. Also, note that the client must not assume that the NFSv4 lease has been renewed when it sees an error on DELEGRETURN. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1f4edfb..ca36d0d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4988,11 +4988,17 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata) trace_nfs4_delegreturn_exit(&data->args, &data->res, task->tk_status); switch (task->tk_status) { - case -NFS4ERR_STALE_STATEID: - case -NFS4ERR_EXPIRED: case 0: renew_lease(data->res.server, data->timestamp); break; + case -NFS4ERR_ADMIN_REVOKED: + case -NFS4ERR_DELEG_REVOKED: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_OLD_STATEID: + case -NFS4ERR_STALE_STATEID: + case -NFS4ERR_EXPIRED: + task->tk_status = 0; + break; default: if (nfs4_async_handle_error(task, data->res.server, NULL) == -EAGAIN) { -- cgit v0.10.2 From 1c283531115bda77a9b559271311c1983fbcffaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 8 Oct 2013 16:38:53 +0200 Subject: ARM: at91: rm9200: switch back to clockevents_config_and_register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The timer code for at91rm9200 was already converted some time ago by Shawn Guo in commit 838a2ae (ARM: use clockevents_config_and_register() where possible) but because of a rounding issue in the timer core this resulted in an easily reproducible oops. So it was reverted (commit b7a8ca5 (ARM: at91: rm9200 fix time support)) which stopped the oops from happening because min_delta_ns is increased by one in arch code which stopped from problem from happening. Now that the timer core problem is fixed (commit a4578ea (clockevents: Sanitize ticks to nsec conversion)), we can switch back to the clockevents_config_and_register helper. Tested-by: Nicolas Ferre Signed-off-by: Uwe Kleine-König Signed-off-by: Daniel Lezcano diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb..bc7b363 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit v0.10.2 From a4a5fc3b64cd553820d97667056506636eaaba77 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails Fix the probe error path to release the clock resource when the sh_mtu2_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 4aac9ee..e6cfb32 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,8 +313,15 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } - return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating); + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: -- cgit v0.10.2 From bd7549308eed47b3750b3dab692034a553e75663 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_mtu2: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index e6cfb32..3cf1283 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,13 +313,18 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } + ret = clk_prepare(p->clk); + if (ret < 0) + goto err2; + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating); if (ret < 0) - goto err2; + goto err3; return 0; - + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: -- cgit v0.10.2 From 394a4486f009a184b58fc2f2435d6f5f800870bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_tmu: Release clock when sh_tmu_register() fails Fix the probe error path to release the clock resource when the sh_tmu_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 78b8dae..1597837 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -475,9 +475,16 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) p->cs_enabled = false; p->enable_count = 0; - return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating, - cfg->clocksource_rating); + ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating, + cfg->clocksource_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: -- cgit v0.10.2 From 1c09eb3e2d761ffd152faa6b9d06caf560e7d445 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:08:00 +0100 Subject: clocksource: sh_tmu: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 1597837..63557cd 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -472,6 +472,11 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) ret = PTR_ERR(p->clk); goto err1; } + + ret = clk_prepare(p->clk); + if (ret < 0) + goto err2; + p->cs_enabled = false; p->enable_count = 0; @@ -479,10 +484,12 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) cfg->clockevent_rating, cfg->clocksource_rating); if (ret < 0) - goto err2; + goto err3; return 0; + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: -- cgit v0.10.2 From 69794ad70cd3b600319f175fc0cbe7abd510791f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 20 Nov 2013 12:57:19 -0500 Subject: NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED Also ensure that we zero out the stateid mode when exiting Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ca36d0d..f01e2aa 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2518,9 +2518,8 @@ static void nfs4_close_done(struct rpc_task *task, void *data) calldata->roc_barrier); nfs_set_open_stateid(state, &calldata->res.stateid, 0); renew_lease(server, calldata->timestamp); - nfs4_close_clear_stateid_flags(state, - calldata->arg.fmode); break; + case -NFS4ERR_ADMIN_REVOKED: case -NFS4ERR_STALE_STATEID: case -NFS4ERR_OLD_STATEID: case -NFS4ERR_BAD_STATEID: @@ -2528,9 +2527,13 @@ static void nfs4_close_done(struct rpc_task *task, void *data) if (calldata->arg.fmode == 0) break; default: - if (nfs4_async_handle_error(task, server, state) == -EAGAIN) + if (nfs4_async_handle_error(task, server, state) == -EAGAIN) { rpc_restart_call_prepare(task); + goto out_release; + } } + nfs4_close_clear_stateid_flags(state, calldata->arg.fmode); +out_release: nfs_release_seqid(calldata->arg.seqid); nfs_refresh_inode(calldata->inode, calldata->res.fattr); dprintk("%s: done, ret = %d!\n", __func__, task->tk_status); -- cgit v0.10.2 From 2c575026fae6e63771bd2a4c1d407214a8096a89 Mon Sep 17 00:00:00 2001 From: Hong Zhiguo Date: Wed, 20 Nov 2013 10:35:05 -0700 Subject: Update of blkg_stat and blkg_rwstat may happen in bh context. While u64_stats_fetch_retry is only preempt_disable on 32bit UP system. This is not enough to avoid preemption by bh and may read strange 64 bit value. Signed-off-by: Hong Zhiguo Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 1610b22..86154ea 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -435,9 +435,9 @@ static inline uint64_t blkg_stat_read(struct blkg_stat *stat) uint64_t v; do { - start = u64_stats_fetch_begin(&stat->syncp); + start = u64_stats_fetch_begin_bh(&stat->syncp); v = stat->cnt; - } while (u64_stats_fetch_retry(&stat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&stat->syncp, start)); return v; } @@ -508,9 +508,9 @@ static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat) struct blkg_rwstat tmp; do { - start = u64_stats_fetch_begin(&rwstat->syncp); + start = u64_stats_fetch_begin_bh(&rwstat->syncp); tmp = *rwstat; - } while (u64_stats_fetch_retry(&rwstat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&rwstat->syncp, start)); return tmp; } -- cgit v0.10.2 From 77f7ce9a9f636daaa65731a833bae1311a7b80e5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 20 Nov 2013 12:02:03 -0800 Subject: clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM Pavel Machek reports that this config is exposed on x86 where the ARM architected timers aren't even present. Make it depend on the ARM architected timers being selected so that non-ARM builds aren't asked about it. Reported-by: Pavel Machek Reviewed-by: Pavel Machek Signed-off-by: Stephen Boyd Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index bdb953e..5c07a56 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -87,6 +87,7 @@ config ARM_ARCH_TIMER config ARM_ARCH_TIMER_EVTSTREAM bool "Support for ARM architected timer event stream generation" default y if ARM_ARCH_TIMER + depends on ARM_ARCH_TIMER help This option enables support for event stream generation based on the ARM architected timer. It is used for waking up CPUs executing -- cgit v0.10.2 From 73f080fde50de1be7ab1e62fd93287edaf0861db Mon Sep 17 00:00:00 2001 From: Courtney Cavin Date: Wed, 20 Nov 2013 15:27:09 -0800 Subject: regmap: make sure we unlock on failure in regmap_bulk_write Signed-off-by: Courtney Cavin Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 9c021d9..d1a9141 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1549,7 +1549,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, val + (i * val_bytes), val_bytes); if (ret != 0) - return ret; + goto out; } } else { ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count); -- cgit v0.10.2 From 76bb80ed3027fc51af24a378a5986672dc01398f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 15 Nov 2013 15:29:57 +0200 Subject: drm/i915/ddi: set sink to power down mode on dp disable Similar to commit fdbc3b1f639bb2cbfb32c612b2699e0ba373317d Author: Jani Nikula Date: Tue Nov 12 17:10:13 2013 +0200 drm/i915/dp: set sink to power down mode on dp disable but for DDI, where we've never done this. Signed-off-by: Jani Nikula Reviewed-by: Paulo Zanoni Tested-by: Paulo Zanoni Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 330077b..333fff3 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1158,9 +1158,10 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) if (wait) intel_wait_ddi_buf_idle(dev_priv, port); - if (type == INTEL_OUTPUT_EDP) { + if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); ironlake_edp_panel_off(intel_dp); } -- cgit v0.10.2 From 34af1ab4a2cc97721a00fce19d9fbafd9ff4b300 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 8 Nov 2013 12:15:55 +0530 Subject: gpio: davinci: fix check for unbanked gpio This patch fixes a check for offset in gpio_to_irq_unbanked() and also assigns gpio_irq, gpio_unbanked of chips[0] to appropriate values which is used in gpio_to_irq_unbanked() function. Without this patch, unbanked IRQ handling is broken. Reported-by: Grygorii Strashko Acked-by: Grygorii Strashko Acked-by: Linus Walleij Signed-off-by: Lad, Prabhakar Signed-off-by: Sekhar Nori diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index 8847adf..84be701 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -327,7 +327,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) * NOTE: we assume for now that only irqs in the first gpio_chip * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). */ - if (offset < d->irq_base) + if (offset < d->gpio_unbanked) return d->gpio_irq + offset; else return -ENODEV; @@ -419,6 +419,8 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) /* pass "bank 0" GPIO IRQs to AINTC */ chips[0].chip.to_irq = gpio_to_irq_unbanked; + chips[0].gpio_irq = bank_irq; + chips[0].gpio_unbanked = pdata->gpio_unbanked; binten = BIT(0); /* AINTC handles mask/unmask; GPIO handles triggering */ -- cgit v0.10.2 From e462f1f5174893f3f5efd03a31ca014b02120f9a Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Fri, 8 Nov 2013 12:15:56 +0530 Subject: ARM: davinci: fix number of resources passed to davinci_gpio_register() The davinci_gpio_register() function expects the number of resources as the second parameter, but sizeof() resources was passed to it due to which it was causing unexpected behaviour. This patch fixes the same by passing the ARRAY_SIZE() of resources. Reported-by: Grygorii Strashko Signed-off-by: Lad, Prabhakar Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index ef9ff1f..536ce52 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -906,7 +906,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = { int __init dm355_gpio_register(void) { return davinci_gpio_register(dm355_gpio_resources, - sizeof(dm355_gpio_resources), + ARRAY_SIZE(dm355_gpio_resources), &dm355_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1511a06..9c96520 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = { int __init dm365_gpio_register(void) { return davinci_gpio_register(dm365_gpio_resources, - sizeof(dm365_gpio_resources), + ARRAY_SIZE(dm365_gpio_resources), &dm365_gpio_platform_data); } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 143a321..72a3aa7 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -792,7 +792,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = { int __init dm644x_gpio_register(void) { return davinci_gpio_register(dm644_gpio_resources, - sizeof(dm644_gpio_resources), + ARRAY_SIZE(dm644_gpio_resources), &dm644_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2a73f29..d1b646c 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { int __init dm646x_gpio_register(void) { return davinci_gpio_register(dm646x_gpio_resources, - sizeof(dm646x_gpio_resources), + ARRAY_SIZE(dm646x_gpio_resources), &dm646x_gpio_platform_data); } /*----------------------------------------------------------------------*/ -- cgit v0.10.2 From 4be77398ac9d948773116b6be4a3c91b3d6ea18c Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 11:44:51 -0800 Subject: time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD Since commit 1e75fa8be9f (time: Condense timekeeper.xtime into xtime_sec - merged in v3.6), there has been an problem with the error accounting in the timekeeping code, such that when truncating to nanoseconds, we round up to the next nsec, but the balancing adjustment to the ntp_error value was dropped. This causes 1ns per tick drift forward of the clock. In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD architectures (s390, ia64, powerpc). The fix is simply to balance the accounting and to subtract the added nanosecond from ntp_error. This allows the internal long-term clock steering to keep the clock accurate. While this fix removes the regression added in 1e75fa8be9f, the ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD and use the new VSYSCALL method, which avoids entirely the nanosecond granular rounding, and the resulting short-term clock adjustment oscillation needed to keep long term accurate time. [ jstultz: Many thanks to Martin for his efforts identifying this subtle bug, and providing the fix. ] Originally-from: Martin Schwidefsky Cc: Tony Luck Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andy Lutomirski Cc: Paul Turner Cc: Steven Rostedt Cc: Richard Cochran Cc: Prarit Bhargava Cc: Fenghua Yu Cc: Thomas Gleixner Cc: stable #v3.6+ Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org Signed-off-by: John Stultz Signed-off-by: Thomas Gleixner diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 3abf534..87b4f00 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1347,7 +1347,7 @@ static inline void old_vsyscall_fixup(struct timekeeper *tk) tk->xtime_nsec -= remainder; tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; - + tk->ntp_error -= (1ULL << tk->shift) << tk->ntp_error_shift; } #else #define old_vsyscall_fixup(tk) -- cgit v0.10.2 From 12b69a599745fc9e203f61fbb7160b2cc5f479dd Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:45:48 +0100 Subject: ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable Various Marvell datasheets advertise second PCIe unit of mv78230 flavour of Armada XP as x4/quad x1 capable. This second unit is in fact only x1 capable. This patch fixes current mv78230 .dtsi to reflect that, i.e. makes 1.0 the second interface (instead of 2.0 at the moment). This was successfully tested on a mv78230-based ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller) connected to this second interface. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e612..98335fb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; -- cgit v0.10.2 From 2163e61c92d9337e721a0d067d88ae62b52e0d3e Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:46:02 +0100 Subject: ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260 mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The two first units are both x4 and quad x1 capable. The third unit is only x4 capable. This patch fixes mv78260 .dtsi to reflect those capabilities. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd13..6660968 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,37 +160,88 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; - pcie@10,0 { + pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; -- cgit v0.10.2 From 6d565409503f4e1f74ac30de14e8c91a2b826cd8 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Sun, 24 Nov 2013 00:40:49 +0000 Subject: Squashfs: fix failure to unlock pages on decompress error Direct decompression into the page cache. If we fall back to using an intermediate buffer (because we cannot grab all the page cache pages) and we get a decompress fail, we forgot to release the pages. Reported-by: Roman Peniaev Signed-off-by: Phillip Lougher diff --git a/fs/squashfs/file_direct.c b/fs/squashfs/file_direct.c index 2943b2b..62a0de6 100644 --- a/fs/squashfs/file_direct.c +++ b/fs/squashfs/file_direct.c @@ -84,6 +84,9 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) */ res = squashfs_read_cache(target_page, block, bsize, pages, page); + if (res < 0) + goto mark_errored; + goto out; } @@ -119,7 +122,7 @@ mark_errored: * dealt with by the caller */ for (i = 0; i < pages; i++) { - if (page[i] == target_page) + if (page[i] == NULL || page[i] == target_page) continue; flush_dcache_page(page[i]); SetPageError(page[i]); -- cgit v0.10.2 From 0fb50e5539c1525939b89c1813b60cc72f90a3e1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 7 Nov 2013 00:56:28 -0800 Subject: ASoC: rcar: select REGMAP 55e5b6fd5af04b6d8b0ac6635edf49476ff298ba (ASoC: rsnd: use regmap instead of original register mapping method) support regmap/regmap_field on Renesas sound driver. It needs CONFIG_REGMAP now. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index 14011d9..ff60e11 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -37,6 +37,7 @@ config SND_SOC_SH4_SIU config SND_SOC_RCAR tristate "R-Car series SRU/SCU/SSIU/SSI support" select SND_SIMPLE_CARD + select REGMAP help This option enables R-Car SUR/SCU/SSIU/SSI sound support -- cgit v0.10.2 From faf6615bf05bc5cecc6e22013b9cb21c77784fd1 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 22 Nov 2013 10:29:18 -0700 Subject: ASoC: dapm: Use SND_SOC_DAPM_INIT_REG_VAL in SND_SOC_DAPM_MUX SND_SOC_DAPM_MUX() doesn't currently initialize the .mask field. This results in the mux never affecting HW, since no bits are ever set or cleared. Fix SND_SOC_DAPM_MUX() to use SND_SOC_DAPM_INIT_REG_VAL() to set up the reg, shift, on_val, and off_val fields like almost all other SND_SOC_xxx() macros. It looks like this was a "typo" in the fixed commit linked below. This makes the speakers on the Toshiba AC100 (PAZ00) laptop work again. Fixes: de9ba98b6d26 ("ASoC: dapm: Make widget power register settings more flexible") Signed-off-by: Stephen Warren Signed-off-by: Mark Brown Cc: # v3.12+ diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 2037c45..56ebdfc 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -104,7 +104,8 @@ struct device; SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, \ +{ .id = snd_soc_dapm_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_virt_mux, .name = wname, \ -- cgit v0.10.2 From c170bbb45febc03ac4d34ba2b8bb55e06104b7e7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 24 Nov 2013 16:32:22 -0700 Subject: block: submit_bio_wait() conversions It was being open coded in a few places. Signed-off-by: Kent Overstreet Cc: Jens Axboe Cc: Joern Engel Cc: Prasad Joshi Cc: Neil Brown Cc: Chris Mason Acked-by: NeilBrown Signed-off-by: Jens Axboe diff --git a/block/blk-flush.c b/block/blk-flush.c index 331e627..fb6f3c0 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -502,15 +502,6 @@ void blk_abort_flushes(struct request_queue *q) } } -static void bio_end_flush(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - if (bio->bi_private) - complete(bio->bi_private); - bio_put(bio); -} - /** * blkdev_issue_flush - queue a flush * @bdev: blockdev to issue flush for @@ -526,7 +517,6 @@ static void bio_end_flush(struct bio *bio, int err) int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, sector_t *error_sector) { - DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q; struct bio *bio; int ret = 0; @@ -548,13 +538,9 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, return -ENXIO; bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_flush; bio->bi_bdev = bdev; - bio->bi_private = &wait; - bio_get(bio); - submit_bio(WRITE_FLUSH, bio); - wait_for_completion_io(&wait); + ret = submit_bio_wait(WRITE_FLUSH, bio); /* * The driver must store the error location in ->bi_sector, if @@ -564,9 +550,6 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, if (error_sector) *error_sector = bio->bi_sector; - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - bio_put(bio); return ret; } diff --git a/drivers/md/md.c b/drivers/md/md.c index b6b7a28..8700de3 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -776,16 +776,10 @@ void md_super_wait(struct mddev *mddev) finish_wait(&mddev->sb_wait, &wq); } -static void bi_complete(struct bio *bio, int error) -{ - complete((struct completion*)bio->bi_private); -} - int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, struct page *page, int rw, bool metadata_op) { struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, rdev->mddev); - struct completion event; int ret; rw |= REQ_SYNC; @@ -801,11 +795,7 @@ int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, else bio->bi_sector = sector + rdev->data_offset; bio_add_page(bio, page, size, 0); - init_completion(&event); - bio->bi_private = &event; - bio->bi_end_io = bi_complete; - submit_bio(rw, bio); - wait_for_completion(&event); + submit_bio_wait(rw, bio); ret = test_bit(BIO_UPTODATE, &bio->bi_flags); bio_put(bio); diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index e0aab44..f85b1c4 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -323,7 +323,6 @@ static void btrfsic_release_block_ctx(struct btrfsic_block_data_ctx *block_ctx); static int btrfsic_read_block(struct btrfsic_state *state, struct btrfsic_block_data_ctx *block_ctx); static void btrfsic_dump_database(struct btrfsic_state *state); -static void btrfsic_complete_bio_end_io(struct bio *bio, int err); static int btrfsic_test_for_metadata(struct btrfsic_state *state, char **datav, unsigned int num_pages); static void btrfsic_process_written_block(struct btrfsic_dev_state *dev_state, @@ -1677,7 +1676,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, for (i = 0; i < num_pages;) { struct bio *bio; unsigned int j; - DECLARE_COMPLETION_ONSTACK(complete); bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i); if (!bio) { @@ -1688,8 +1686,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, } bio->bi_bdev = block_ctx->dev->bdev; bio->bi_sector = dev_bytenr >> 9; - bio->bi_end_io = btrfsic_complete_bio_end_io; - bio->bi_private = &complete; for (j = i; j < num_pages; j++) { ret = bio_add_page(bio, block_ctx->pagev[j], @@ -1702,12 +1698,7 @@ static int btrfsic_read_block(struct btrfsic_state *state, "btrfsic: error, failed to add a single page!\n"); return -1; } - submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (submit_bio_wait(READ, bio)) { printk(KERN_INFO "btrfsic: read error at logical %llu dev %s!\n", block_ctx->start, block_ctx->dev->name); @@ -1730,11 +1721,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, return block_ctx->len; } -static void btrfsic_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static void btrfsic_dump_database(struct btrfsic_state *state) { struct list_head *elem_all; @@ -2998,14 +2984,12 @@ int btrfsic_submit_bh(int rw, struct buffer_head *bh) return submit_bh(rw, bh); } -void btrfsic_submit_bio(int rw, struct bio *bio) +static void __btrfsic_submit_bio(int rw, struct bio *bio) { struct btrfsic_dev_state *dev_state; - if (!btrfsic_is_initialized) { - submit_bio(rw, bio); + if (!btrfsic_is_initialized) return; - } mutex_lock(&btrfsic_mutex); /* since btrfsic_submit_bio() is also called before @@ -3097,10 +3081,20 @@ void btrfsic_submit_bio(int rw, struct bio *bio) } leave: mutex_unlock(&btrfsic_mutex); +} +void btrfsic_submit_bio(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); submit_bio(rw, bio); } +int btrfsic_submit_bio_wait(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); + return submit_bio_wait(rw, bio); +} + int btrfsic_mount(struct btrfs_root *root, struct btrfs_fs_devices *fs_devices, int including_extent_data, u32 print_mask) diff --git a/fs/btrfs/check-integrity.h b/fs/btrfs/check-integrity.h index 8b59175..13b8566 100644 --- a/fs/btrfs/check-integrity.h +++ b/fs/btrfs/check-integrity.h @@ -22,9 +22,11 @@ #ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY int btrfsic_submit_bh(int rw, struct buffer_head *bh); void btrfsic_submit_bio(int rw, struct bio *bio); +int btrfsic_submit_bio_wait(int rw, struct bio *bio); #else #define btrfsic_submit_bh submit_bh #define btrfsic_submit_bio submit_bio +#define btrfsic_submit_bio_wait submit_bio_wait #endif int btrfsic_mount(struct btrfs_root *root, diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 856bc2b..014beaa 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1952,11 +1952,6 @@ static int free_io_failure(struct inode *inode, struct io_failure_record *rec, return err; } -static void repair_io_failure_callback(struct bio *bio, int err) -{ - complete(bio->bi_private); -} - /* * this bypasses the standard btrfs submit functions deliberately, as * the standard behavior is to write all copies in a raid setup. here we only @@ -1973,7 +1968,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, { struct bio *bio; struct btrfs_device *dev; - DECLARE_COMPLETION_ONSTACK(compl); u64 map_length = 0; u64 sector; struct btrfs_bio *bbio = NULL; @@ -1989,8 +1983,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; - bio->bi_private = &compl; - bio->bi_end_io = repair_io_failure_callback; bio->bi_size = 0; map_length = length; @@ -2011,10 +2003,8 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, } bio->bi_bdev = dev->bdev; bio_add_page(bio, page, length, start - page_offset(page)); - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) { /* try to remap that extent elsewhere? */ bio_put(bio); btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 2544805..3214ebe 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -208,7 +208,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, int is_metadata, int have_csum, const u8 *csum, u64 generation, u16 csum_size); -static void scrub_complete_bio_end_io(struct bio *bio, int err); static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write); @@ -1292,7 +1291,6 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, for (page_num = 0; page_num < sblock->page_count; page_num++) { struct bio *bio; struct scrub_page *page = sblock->pagev[page_num]; - DECLARE_COMPLETION_ONSTACK(complete); if (page->dev->bdev == NULL) { page->io_error = 1; @@ -1309,18 +1307,11 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, } bio->bi_bdev = page->dev->bdev; bio->bi_sector = page->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; bio_add_page(bio, page->page, PAGE_SIZE, 0); - btrfsic_submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - page->io_error = !test_bit(BIO_UPTODATE, &bio->bi_flags); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(READ, bio)) sblock->no_io_error_seen = 0; + bio_put(bio); } @@ -1389,11 +1380,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, sblock->checksum_error = 1; } -static void scrub_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write) @@ -1428,7 +1414,6 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, sblock_bad->checksum_error || page_bad->io_error) { struct bio *bio; int ret; - DECLARE_COMPLETION_ONSTACK(complete); if (!page_bad->dev->bdev) { printk_ratelimited(KERN_WARNING @@ -1441,19 +1426,14 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, return -EIO; bio->bi_bdev = page_bad->dev->bdev; bio->bi_sector = page_bad->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; ret = bio_add_page(bio, page_good->page, PAGE_SIZE, 0); if (PAGE_SIZE != ret) { bio_put(bio); return -EIO; } - btrfsic_submit_bio(WRITE, bio); - /* this will also unplug the queue */ - wait_for_completion(&complete); - if (!bio_flagged(bio, BIO_UPTODATE)) { + if (btrfsic_submit_bio_wait(WRITE, bio)) { btrfs_dev_stat_inc_and_print(page_bad->dev, BTRFS_DEV_STAT_WRITE_ERRS); btrfs_dev_replace_stats_inc( @@ -3373,7 +3353,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, struct bio *bio; struct btrfs_device *dev; int ret; - DECLARE_COMPLETION_ONSTACK(compl); dev = sctx->wr_ctx.tgtdev; if (!dev) @@ -3390,8 +3369,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, spin_unlock(&sctx->stat_lock); return -ENOMEM; } - bio->bi_private = &compl; - bio->bi_end_io = scrub_complete_bio_end_io; bio->bi_size = 0; bio->bi_sector = physical_for_dev_replace >> 9; bio->bi_bdev = dev->bdev; @@ -3402,10 +3379,8 @@ leave_with_eio: btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); return -EIO; } - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) goto leave_with_eio; bio_put(bio); diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index b51a607..e9a97a0 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -24,13 +24,6 @@ struct hfsplus_wd { u16 embed_count; }; -static void hfsplus_end_io_sync(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - complete(bio->bi_private); -} - /* * hfsplus_submit_bio - Perfrom block I/O * @sb: super block of volume for I/O @@ -53,7 +46,6 @@ static void hfsplus_end_io_sync(struct bio *bio, int err) int hfsplus_submit_bio(struct super_block *sb, sector_t sector, void *buf, void **data, int rw) { - DECLARE_COMPLETION_ONSTACK(wait); struct bio *bio; int ret = 0; u64 io_size; @@ -73,8 +65,6 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, bio = bio_alloc(GFP_NOIO, 1); bio->bi_sector = sector; bio->bi_bdev = sb->s_bdev; - bio->bi_end_io = hfsplus_end_io_sync; - bio->bi_private = &wait; if (!(rw & WRITE) && data) *data = (u8 *)buf + offset; @@ -93,12 +83,7 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, buf = (u8 *)buf + len; } - submit_bio(rw, bio); - wait_for_completion(&wait); - - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - + ret = submit_bio_wait(rw, bio); out: bio_put(bio); return ret < 0 ? ret : 0; diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index 550475c..0f95f0d 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -14,16 +14,10 @@ #define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1)) -static void request_complete(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int sync_request(struct page *page, struct block_device *bdev, int rw) { struct bio bio; struct bio_vec bio_vec; - struct completion complete; bio_init(&bio); bio.bi_max_vecs = 1; @@ -35,13 +29,8 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) bio.bi_size = PAGE_SIZE; bio.bi_bdev = bdev; bio.bi_sector = page->index * (PAGE_SIZE >> 9); - init_completion(&complete); - bio.bi_private = &complete; - bio.bi_end_io = request_complete; - submit_bio(rw, &bio); - wait_for_completion(&complete); - return test_bit(BIO_UPTODATE, &bio.bi_flags) ? 0 : -EIO; + return submit_bio_wait(rw, &bio); } static int bdev_readpage(void *_sb, struct page *page) -- cgit v0.10.2 From f06d19e460cdd326eff955ca614cb8064bd0a5f2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 15 Nov 2013 12:08:05 +0530 Subject: ARC: extable: Enable sorting at build time Avoids wasting cycles at boot specially on slower simulators Signed-off-by: Vineet Gupta Cc: Michal Marek Cc: Francois Bedard Cc: linux-kernel@vger.kernel.org Acked-by: David Daney diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 2ee0c9b..9063ae6 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -8,6 +8,7 @@ config ARC def_bool y + select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev select DEVTMPFS if !INITRAMFS_SOURCE="" diff --git a/scripts/sortextable.c b/scripts/sortextable.c index 5f7a8b6..7941fbd 100644 --- a/scripts/sortextable.c +++ b/scripts/sortextable.c @@ -31,6 +31,10 @@ #include #include +#ifndef EM_ARCOMPACT +#define EM_ARCOMPACT 93 +#endif + #ifndef EM_AARCH64 #define EM_AARCH64 183 #endif @@ -268,6 +272,7 @@ do_file(char const *const fname) case EM_S390: custom_sort = sort_relative_table; break; + case EM_ARCOMPACT: case EM_ARM: case EM_AARCH64: case EM_MIPS: -- cgit v0.10.2 From 97bc386fc12deeb41d5bff33548e3002b258d4e0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 21 Nov 2013 15:34:16 +0530 Subject: ARC: Add guard macro to uapi/asm/unistd.h Chen originally proposed this as "right thing to do" however I actually ran into this when building perf tools. Some of the utils include unistd.h as well as linux/unistd.h. Since -I includes kernel headers too, we end up including the ARC unistd.h twice, leading to redefinition nwarnings. ------------------>8------------------- CC bench/sched-pipe.o In file included from ~/kernel/arch/arc/include/uapi/asm/unistd.h:21:0, from ~/kernel/include/uapi/linux/unistd.h:7, from bench/sched-pipe.c:24: ~/kernel/include/uapi/asm-generic/unistd.h:889:0: error: "__NR_fcntl64" redefined [-Werror] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/gnu/arc-linux-uclibc/sys-include/sys/syscall.h:24:0, from bench/../perf.h:112, from bench/sched-pipe.c:13: ~/gnu/arc-linux-uclibc/include/bits/sysnum.h:761:0: note: this is the location of the previous definition ------------------>8------------------- Verified that make headers_install works fine with this. Suggested-by: Chen Gang Signed-off-by: Vineet Gupta Cc: David Howells diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h index 6f30484..68125dd 100644 --- a/arch/arc/include/uapi/asm/unistd.h +++ b/arch/arc/include/uapi/asm/unistd.h @@ -8,6 +8,9 @@ /******** no-legacy-syscalls-ABI *******/ +#ifndef _UAPI_ASM_ARC_UNISTD_H +#define _UAPI_ASM_ARC_UNISTD_H + #define __ARCH_WANT_SYS_EXECVE #define __ARCH_WANT_SYS_CLONE #define __ARCH_WANT_SYS_VFORK @@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls) /* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */ #define __NR_sysfs (__NR_arch_specific_syscall + 3) __SYSCALL(__NR_sysfs, sys_sysfs) + +#endif -- cgit v0.10.2 From 38d321c899457be111f1a1bcd8c8d1ca18772072 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Nov 2013 02:01:38 -0800 Subject: pinctrl: rockchip: testing the wrong variable There is a copy and paste bug so we test "info->reg_base" instead of "info->reg_pull". Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index e939c28..fe2ec1b 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -1453,8 +1453,8 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev) if (ctrl->type == RK3188) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); info->reg_pull = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(info->reg_base)) - return PTR_ERR(info->reg_base); + if (IS_ERR(info->reg_pull)) + return PTR_ERR(info->reg_pull); } ret = rockchip_gpiolib_register(pdev, info); -- cgit v0.10.2 From c590854dffc06095f38a63b3bdb9e4370282a53e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 10 Nov 2013 02:35:56 +0300 Subject: pinctrl: abx500: fix some more bitwise AND tests I sent a patch to fix some bitwise AND tests but I guess I missed some. Sorry about that. Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 4780959..5183e7b 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -418,7 +418,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, - !!(af.alta_val && BIT(0))); + !!(af.alta_val & BIT(0))); if (ret < 0) goto out; @@ -439,7 +439,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit1, !!(af.altb_val && BIT(0))); + af.alt_bit1, !!(af.altb_val & BIT(0))); if (ret < 0) goto out; @@ -462,7 +462,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit2, !!(af.altc_val && BIT(1))); + af.alt_bit2, !!(af.altc_val & BIT(1))); break; default: -- cgit v0.10.2 From d32c3e260f95f5d8ed42c64dc2d9ec79cc36da1e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 14 Nov 2013 11:22:54 +0300 Subject: pinctrl: rockchip: missing unlock on error in rockchip_set_pull() We need to unlock here before returning -EINVAL. Fixes: 6ca5274d1d12 ('pinctrl: rockchip: add rk3188 specifics') Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index fe2ec1b..46dddc1 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -504,6 +504,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, data |= (3 << bit); break; default: + spin_unlock_irqrestore(&bank->slock, flags); dev_err(info->dev, "unsupported pull setting %d\n", pull); return -EINVAL; -- cgit v0.10.2 From c51e9701c4ad68d87baecefad6c58d051574f848 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 22 Nov 2013 10:37:53 +0000 Subject: drm/i915: Prefer setting PTE cache age to 3 We have conflicting benchmark data that suggest either age 0 or age 3 is better. However, the earlier benchmark on which we based the switch to age 0 (commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d Author: Ben Widawsky Date: Thu Jul 4 11:02:03 2013 -0700 drm/i915/hsw: Set correct Haswell PTE encodings) actually seems to prefer the default PTE encoding as age 3. Presumably, this is in part due to the use of MOCS to override the PTE encodings when appropriate. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69870 Tested-by: mengmeng.meng@intel.com Signed-off-by: Chris Wilson Acked-by: Jesse Barnes Reviewed-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 3620a1b..38cb8d4 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -57,7 +57,9 @@ typedef gen8_gtt_pte_t gen8_ppgtt_pde_t; #define HSW_WB_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x2) #define HSW_WB_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x3) #define HSW_WB_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0xb) +#define HSW_WB_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x8) #define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6) +#define HSW_WT_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x7) #define GEN8_PTES_PER_PAGE (PAGE_SIZE / sizeof(gen8_gtt_pte_t)) #define GEN8_PDES_PER_PAGE (PAGE_SIZE / sizeof(gen8_ppgtt_pde_t)) @@ -185,10 +187,10 @@ static gen6_gtt_pte_t iris_pte_encode(dma_addr_t addr, case I915_CACHE_NONE: break; case I915_CACHE_WT: - pte |= HSW_WT_ELLC_LLC_AGE0; + pte |= HSW_WT_ELLC_LLC_AGE3; break; default: - pte |= HSW_WB_ELLC_LLC_AGE0; + pte |= HSW_WB_ELLC_LLC_AGE3; break; } -- cgit v0.10.2 From 2ab2b74277a86afe0dd92976db695a2bb8b93366 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 22 Nov 2013 14:17:18 +0000 Subject: ASoC: wm8990: Mark the register map as dirty when powering down Otherwise we'll skip sync on resume. Signed-off-by: Mark Brown Acked-by: Charles Keepax Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 253c88b..4f05fb8 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1259,6 +1259,8 @@ static int wm8990_set_bias_level(struct snd_soc_codec *codec, /* disable POBCTRL, SOFT_ST and BUFDCOPEN */ snd_soc_write(codec, WM8990_ANTIPOP2, 0x0); + + codec->cache_sync = 1; break; } -- cgit v0.10.2 From 39189c98d161c292e7f80fe50da00d33193362b9 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sun, 10 Nov 2013 19:37:37 +0100 Subject: usb: phy: remove dead code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit [4d175f34: usb: phy: nop: Defer clock prepare until PHY init] removed a goto reaching behind a “return ret” at the end of the function thus removing the only possible way that statement could be reached, and so rendering it a dead code. This commit cleans it up by removing said dead code. Signed-off-by: Michal Nazarewicz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 6370e50..48d41ab 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -66,8 +66,6 @@ static int am335x_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, am_phy); return 0; - - return ret; } static int am335x_phy_remove(struct platform_device *pdev) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index fce3a9e..db4fc22 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -271,8 +271,6 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); return 0; - - return err; } static int usb_phy_gen_xceiv_remove(struct platform_device *pdev) -- cgit v0.10.2 From af9f51c5512f9d55972603dd5dd90d0fa300b200 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Oct 2013 09:45:29 -0500 Subject: usb: phy: generic: fix how we find out about our resources instead of having each user of generic phy find out about its own resources and pass it to the core layer, have th core layer itself figure that out. It's as simple as moving a piece of code around. This fixes a big regression caused during the merge window where am335x-based platforms wouldn't be able to probe their PHY driver. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 48d41ab..0e3c60c 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -52,8 +52,7 @@ static int am335x_phy_probe(struct platform_device *pdev) return am_phy->id; } - ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, - USB_PHY_TYPE_USB2, 0, false); + ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL); if (ret) return ret; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index db4fc22..0c3b241 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -150,10 +150,38 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) } int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc) + struct usb_phy_gen_xceiv_platform_data *pdata) { + enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; + u32 clk_rate = 0; + bool needs_vcc = false; + + nop->reset_active_low = true; /* default behaviour */ + + if (dev->of_node) { + struct device_node *node = dev->of_node; + enum of_gpio_flags flags; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_vcc = of_property_read_bool(node, "vcc-supply"); + nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", + 0, &flags); + if (nop->gpio_reset == -EPROBE_DEFER) + return -EPROBE_DEFER; + + nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; + + } else if (pdata) { + type = pdata->type; + clk_rate = pdata->clk_rate; + needs_vcc = pdata->needs_vcc; + nop->gpio_reset = pdata->gpio_reset; + } + nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), GFP_KERNEL); if (!nop->phy.otg) @@ -218,43 +246,14 @@ EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usb_phy_gen_xceiv_platform_data *pdata = - dev_get_platdata(&pdev->dev); struct usb_phy_gen_xceiv *nop; - enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; - u32 clk_rate = 0; - bool needs_vcc = false; nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); if (!nop) return -ENOMEM; - nop->reset_active_low = true; /* default behaviour */ - - if (dev->of_node) { - struct device_node *node = dev->of_node; - enum of_gpio_flags flags; - - if (of_property_read_u32(node, "clock-frequency", &clk_rate)) - clk_rate = 0; - - needs_vcc = of_property_read_bool(node, "vcc-supply"); - nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", - 0, &flags); - if (nop->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; - - nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; - - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - nop->gpio_reset = pdata->gpio_reset; - } - - err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc); + err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); if (err) return err; diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index d2a220d..38a81f3 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -1,6 +1,8 @@ #ifndef _PHY_GENERIC_H_ #define _PHY_GENERIC_H_ +#include + struct usb_phy_gen_xceiv { struct usb_phy phy; struct device *dev; @@ -14,6 +16,6 @@ int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc); + struct usb_phy_gen_xceiv_platform_data *pdata); #endif -- cgit v0.10.2 From 93f599f279ab56b1761c76e53f9753b26aeefe9e Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 21 Nov 2013 13:49:17 +0100 Subject: usb: gadget: s3c-hsotg: fix spinlock locking This patch adds missing spinlock locking in s3c_hsotg_complete_setup function, and unlocking for gadget setup call. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 9875d9c..56fad76 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1245,7 +1245,9 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, /* as a fallback, try delivering it to the driver to deal with */ if (ret == 0 && hsotg->driver) { + spin_unlock(&hsotg->lock); ret = hsotg->driver->setup(&hsotg->gadget, ctrl); + spin_lock(&hsotg->lock); if (ret < 0) dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); } @@ -1308,10 +1310,12 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep, return; } + spin_lock(&hsotg->lock); if (req->actual == 0) s3c_hsotg_enqueue_setup(hsotg); else s3c_hsotg_process_control(hsotg, req->buf); + spin_unlock(&hsotg->lock); } /** -- cgit v0.10.2 From d18f7116a5ddb8263fe62b05ad63e5ceb5875791 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 21 Nov 2013 13:49:18 +0100 Subject: usb: gadget: s3c-hsotg: fix disconnect handling This patch moves s3c_hsotg_disconnect function call from USBSusp interrupt handler to SET_ADDRESS request handler. It's because disconnected state can't be detected directly, because this hardware doesn't support Disconnected interrupt for device mode. For both Suspend and Disconnect events there is one interrupt USBSusp, but calling s3c_hsotg_disconnect from this interrupt handler causes config reset in composite layer, which is not undesirable for Suspended state. For this reason s3c_hsotg_disconnect is called from SET_ADDRESS request handler, which occurs always after disconnection, so we do disconnect immediately before we are connected again. It's probably only way we can do handle disconnection correctly. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 56fad76..e20bc10 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1180,6 +1180,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, } static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); /** * s3c_hsotg_process_control - process a control request @@ -1221,6 +1222,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: + s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DevAddr_MASK; dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; @@ -2537,7 +2539,6 @@ irq_retry: writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); - s3c_hsotg_disconnect(hsotg); } if (gintsts & GINTSTS_WkUpInt) { -- cgit v0.10.2 From b144e4ab1ef130e8bf30bcd3e529b7f35112c503 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 18 Nov 2013 11:37:20 +0100 Subject: usb: gadget: fix pxa25x compilation problems In commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" we removed the implicit inclusion of from . The pxa25x_udc was not using that, but it was relying on to implictly include which in turn implicitly included , which was needed for the driver to compile. Fix this up by explicitly including the necessary header. Reported-by: Russell King Signed-off-by: Linus Walleij Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 0ac6064..409a3c4 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -54,6 +54,7 @@ */ #ifdef CONFIG_ARCH_PXA #include +#include #endif #ifdef CONFIG_ARCH_LUBBOCK -- cgit v0.10.2 From fd3923a9904f34d5472134358d87f454a288fc45 Mon Sep 17 00:00:00 2001 From: Apelete Seketeli Date: Tue, 19 Nov 2013 23:18:20 +0100 Subject: usb: fix musb gadget to enable OTG mode conditionally The musb driver is usable in host, gadget or dual role mode depending on the kernel configuration. However, the musb gadget part of the driver is enabling OTG mode whether the driver is built for dual role or gadget only mode. This induces a bug for gadget only USB device controllers where the kernel tries to use Host Negotiation Protocol with such controllers, which causes a panic. This behaviour is now fixed by enabling OTG mode only when musb driver is built for dual role mode. Signed-off-by: Apelete Seketeli Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d2d3a17..32fb057c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1796,7 +1796,11 @@ int musb_gadget_setup(struct musb *musb) /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; +#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE) musb->g.is_otg = 1; +#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) + musb->g.is_otg = 0; +#endif musb_g_init_endpoints(musb); -- cgit v0.10.2 From dc52c57411ccad276af6b4f35a670773110b35c5 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 15 Nov 2013 21:38:50 +0200 Subject: usb: phy-generic: fix nop xceiv probe Commit bd27fa44e13830d2baa278d5702e766380659cb3 (usb: phy: generic: Don't use regulator framework for RESET line) introduced regression: All users of usb_nop_xceiv_register() will fail because there is no platform data and the default reset GPIO is 0 which is a valid GPIO. Fix that. Signed-off-by: Aaro Koskinen Acked-by: Roger Quadros Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 0c3b241..8ee37f4 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -180,6 +180,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, clk_rate = pdata->clk_rate; needs_vcc = pdata->needs_vcc; nop->gpio_reset = pdata->gpio_reset; + } else { + nop->gpio_reset = -1; } nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), -- cgit v0.10.2 From 37cfbc42887fbd4ff0f4c520c9f3fdea9e6f2a82 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 15 Nov 2013 10:35:12 +0200 Subject: usb: phy: generic: fix a compiler warning Just because it annoys me. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 8ee37f4..2d135b0 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -162,7 +162,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, if (dev->of_node) { struct device_node *node = dev->of_node; - enum of_gpio_flags flags; + enum of_gpio_flags flags = 0; if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; -- cgit v0.10.2 From 6f6485463aada1ec6a0f3db6a03eb8e393d6bb55 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 9 Nov 2013 12:38:09 +0100 Subject: USB: serial: fix race in generic write Fix race in generic write implementation, which could lead to temporarily degraded throughput. The current generic write implementation introduced by commit 27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has always had this bug, although it's fairly hard to trigger and the consequences are not likely to be noticed. Specifically, a write() on one CPU while the completion handler is running on another could result in only one of the two write urbs being utilised to empty the remainder of the write fifo (unless there is a second write() that doesn't race during that time). Cc: stable # 2.6.35 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2b01ec8..e36b25a 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -173,16 +173,8 @@ retry: clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - /* - * Try sending off another urb, unless called from completion handler - * (in which case there will be no free urb or no data). - */ - if (mem_flags != GFP_ATOMIC) - goto retry; - clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); - - return 0; + goto retry; /* try sending off another urb */ } EXPORT_SYMBOL_GPL(usb_serial_generic_write_start); -- cgit v0.10.2 From 043e3f834530e15e89c58c1b7af59cc646700134 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 9 Nov 2013 12:38:10 +0100 Subject: USB: serial: fix write memory-allocation flag Fix regression introduced by commit 818f60365a29 ("USB: serial: add memory flags to usb_serial_generic_write_start"), which incorrectly used GFP_KERNEL in write(), which must not not sleep. Reported-by: Dave Jones Tested-by: Dave Jones Cc: Dave Jones Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index e36b25a..b63ce02 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -200,7 +200,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return 0; count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); - result = usb_serial_generic_write_start(port, GFP_KERNEL); + result = usb_serial_generic_write_start(port, GFP_ATOMIC); if (result) return result; -- cgit v0.10.2 From d373a8534d5e1e7a350e40d3c11961a7cd8d530b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 12 Nov 2013 16:37:46 +0100 Subject: usb: musb: musb_cppi41: factor most of cppi41_dma_callback() into cppi41_trans_done() This patch moves most of the logic in cppi41_dma_callback() into cppi41_trans_done() where it can be called from another function. Instead of computing "transferred" (the number of bytes transferred in the last transaction) in cppi41_trans_done() the member "cppi41_channel->prog_len" is now set to 0 if the transfer as a whole can be considered as done. If it is != 0 then the next iteration is assumed. This is a preparation for a workaround. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ff9d6de..83a8a1d 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -96,31 +96,15 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel) cppi41_channel->usb_toggle = toggle; } -static void cppi41_dma_callback(void *private_data) +static void cppi41_dma_callback(void *private_data); + +static void cppi41_trans_done(struct dma_channel *channel) { - struct dma_channel *channel = private_data; struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; - unsigned long flags; - struct dma_tx_state txstate; - u32 transferred; - spin_lock_irqsave(&musb->lock, flags); - - dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie, - &txstate); - transferred = cppi41_channel->prog_len - txstate.residue; - cppi41_channel->transferred += transferred; - - dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n", - hw_ep->epnum, cppi41_channel->transferred, - cppi41_channel->total_len); - - update_rx_toggle(cppi41_channel); - - if (cppi41_channel->transferred == cppi41_channel->total_len || - transferred < cppi41_channel->packet_sz) { + if (!cppi41_channel->prog_len) { /* done, complete */ cppi41_channel->channel.actual_len = @@ -150,10 +134,8 @@ static void cppi41_dma_callback(void *private_data) remain_bytes, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (WARN_ON(!dma_desc)) { - spin_unlock_irqrestore(&musb->lock, flags); + if (WARN_ON(!dma_desc)) return; - } dma_desc->callback = cppi41_dma_callback; dma_desc->callback_param = channel; @@ -166,6 +148,37 @@ static void cppi41_dma_callback(void *private_data) musb_writew(epio, MUSB_RXCSR, csr); } } +} + +static void cppi41_dma_callback(void *private_data) +{ + struct dma_channel *channel = private_data; + struct cppi41_dma_channel *cppi41_channel = channel->private_data; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + struct musb *musb = hw_ep->musb; + unsigned long flags; + struct dma_tx_state txstate; + u32 transferred; + + spin_lock_irqsave(&musb->lock, flags); + + dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie, + &txstate); + transferred = cppi41_channel->prog_len - txstate.residue; + cppi41_channel->transferred += transferred; + + dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n", + hw_ep->epnum, cppi41_channel->transferred, + cppi41_channel->total_len); + + update_rx_toggle(cppi41_channel); + + if (cppi41_channel->transferred == cppi41_channel->total_len || + transferred < cppi41_channel->packet_sz) + cppi41_channel->prog_len = 0; + + cppi41_trans_done(channel); + spin_unlock_irqrestore(&musb->lock, flags); } -- cgit v0.10.2 From a655f481d83d6d37bec0a2ddfdd24c30ff8f541f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 12 Nov 2013 16:37:47 +0100 Subject: usb: musb: musb_cppi41: handle pre-mature TX complete interrupt The TX-complete interrupt of the CPPI41 on AM335x fires too early. Adding a loop and counting how long it takes until the MUSB_TXCSR_TXPKTRDY bit is cleared I see FS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadc54002, len=1514 is_tx=1 |cppi41_dma_callback() 74 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8802, len=1514 is_tx=1 |cppi41_dma_callback() 66 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8002, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadf55802, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops avg: 110 - 150us HS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xaca6f002, len=1514 is_tx=1 |cppi41_dma_callback() 0 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f802, len=1514 is_tx=1 |cppi41_dma_callback() 2 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f002, len=1514 is_tx=1 |cppi41_dma_callback() 13 loops avg: 2us for the same test case. One loop means a udelay(1). The delay seems to depend on the packet size. On HS the bit is always cleared for small packet sizes while on FS it is never the case, it mostly around 110us. This testing has been performed with g_ether (musb as device) and using BULK transfers. INTR transfers are way more fun: during init the gadget sends a INT packet to the host and cppi41 says "transfer done" shortly after. The MUSB_TXCSR_TXPKTRDY bit is set even seconds later. The reason is that the host did not try to receive it, it does so after the interface (on host side) has been configured. Until this happens, that packet remains in musb's FIFO. To fix this, two things are done: - No DMA transfers for INT based endpoints. These transfer are usually very small and rare so it is likely better to skip the DMA engine and stuff the four bytes directly into the FIFO - on HS we poll up to 25us and hope that bit goes away. If not we setup a hrtimer to poll for it. The 140us delay is a rule of thumb. In FS the command | ping 10.10.10.10 -c1 -s65130 creates about 44 1514bytes transfers. About 19 of them need a second timer to complete. Reported-by: Bin Liu Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 83a8a1d..a12bd30 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -38,6 +38,7 @@ struct cppi41_dma_channel { u32 prog_len; u32 transferred; u32 packet_sz; + struct list_head tx_check; }; #define MUSB_DMA_NUM_CHANNELS 15 @@ -47,6 +48,8 @@ struct cppi41_dma_controller { struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS]; struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS]; struct musb *musb; + struct hrtimer early_tx; + struct list_head early_tx_list; u32 rx_mode; u32 tx_mode; u32 auto_req; @@ -96,11 +99,23 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel) cppi41_channel->usb_toggle = toggle; } +static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep) +{ + u8 epnum = hw_ep->epnum; + struct musb *musb = hw_ep->musb; + void __iomem *epio = musb->endpoints[epnum].regs; + u16 csr; + + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_TXPKTRDY) + return false; + return true; +} + static void cppi41_dma_callback(void *private_data); -static void cppi41_trans_done(struct dma_channel *channel) +static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) { - struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; @@ -138,7 +153,7 @@ static void cppi41_trans_done(struct dma_channel *channel) return; dma_desc->callback = cppi41_dma_callback; - dma_desc->callback_param = channel; + dma_desc->callback_param = &cppi41_channel->channel; cppi41_channel->cookie = dma_desc->tx_submit(dma_desc); dma_async_issue_pending(dc); @@ -150,6 +165,41 @@ static void cppi41_trans_done(struct dma_channel *channel) } } +static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer) +{ + struct cppi41_dma_controller *controller; + struct cppi41_dma_channel *cppi41_channel, *n; + struct musb *musb; + unsigned long flags; + enum hrtimer_restart ret = HRTIMER_NORESTART; + + controller = container_of(timer, struct cppi41_dma_controller, + early_tx); + musb = controller->musb; + + spin_lock_irqsave(&musb->lock, flags); + list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list, + tx_check) { + bool empty; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + list_del_init(&cppi41_channel->tx_check); + cppi41_trans_done(cppi41_channel); + } + } + + if (!list_empty(&controller->early_tx_list)) { + ret = HRTIMER_RESTART; + hrtimer_forward_now(&controller->early_tx, + ktime_set(0, 150 * NSEC_PER_USEC)); + } + + spin_unlock_irqrestore(&musb->lock, flags); + return ret; +} + static void cppi41_dma_callback(void *private_data) { struct dma_channel *channel = private_data; @@ -159,6 +209,7 @@ static void cppi41_dma_callback(void *private_data) unsigned long flags; struct dma_tx_state txstate; u32 transferred; + bool empty; spin_lock_irqsave(&musb->lock, flags); @@ -177,8 +228,52 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; - cppi41_trans_done(channel); - + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + cppi41_trans_done(cppi41_channel); + } else { + struct cppi41_dma_controller *controller; + /* + * On AM335x it has been observed that the TX interrupt fires + * too early that means the TXFIFO is not yet empty but the DMA + * engine says that it is done with the transfer. We don't + * receive a FIFO empty interrupt so the only thing we can do is + * to poll for the bit. On HS it usually takes 2us, on FS around + * 110us - 150us depending on the transfer size. + * We spin on HS (no longer than than 25us and setup a timer on + * FS to check for the bit and complete the transfer. + */ + controller = cppi41_channel->controller; + + if (musb->g.speed == USB_SPEED_HIGH) { + unsigned wait = 25; + + do { + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) + break; + wait--; + if (!wait) + break; + udelay(1); + } while (1); + + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + cppi41_trans_done(cppi41_channel); + goto out; + } + } + list_add_tail(&cppi41_channel->tx_check, + &controller->early_tx_list); + if (!hrtimer_active(&controller->early_tx)) { + hrtimer_start_range_ns(&controller->early_tx, + ktime_set(0, 140 * NSEC_PER_USEC), + 40 * NSEC_PER_USEC, + HRTIMER_MODE_REL); + } + } +out: spin_unlock_irqrestore(&musb->lock, flags); } @@ -377,6 +472,8 @@ static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket, WARN_ON(1); return 1; } + if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK) + return 0; if (cppi41_channel->is_tx) return 1; /* AM335x Advisory 1.0.13. No workaround for device RX mode */ @@ -401,6 +498,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE) return 0; + list_del_init(&cppi41_channel->tx_check); if (is_tx) { csr = musb_readw(epio, MUSB_TXCSR); csr &= ~MUSB_TXCSR_DMAENAB; @@ -508,6 +606,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) cppi41_channel->controller = controller; cppi41_channel->port_num = port; cppi41_channel->is_tx = is_tx; + INIT_LIST_HEAD(&cppi41_channel->tx_check); musb_dma = &cppi41_channel->channel; musb_dma->private_data = cppi41_channel; @@ -533,6 +632,7 @@ void dma_controller_destroy(struct dma_controller *c) struct cppi41_dma_controller *controller = container_of(c, struct cppi41_dma_controller, controller); + hrtimer_cancel(&controller->early_tx); cppi41_dma_controller_stop(controller); kfree(controller); } @@ -552,6 +652,9 @@ struct dma_controller *dma_controller_create(struct musb *musb, if (!controller) goto kzalloc_fail; + hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + controller->early_tx.function = cppi41_recheck_tx_req; + INIT_LIST_HEAD(&controller->early_tx_list); controller->musb = musb; controller->controller.channel_alloc = cppi41_dma_channel_allocate; -- cgit v0.10.2 From 2bac51a1827a18821150ed8c9f9752c02f9c2b02 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 11 Nov 2013 23:43:32 +0100 Subject: usb: gadget: composite: reset delayed_status on reset_config The delayed_status value is used to keep track of status response packets on ep0. It needs to be reset or the set_config function would still delay the answer, if the usb device got unplugged while waiting for setup_continue to be called. Cc: stable@vger.kernel.org Signed-off-by: Michael Grzeschik Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 3e7ae70..2018ba1 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -593,6 +593,7 @@ static void reset_config(struct usb_composite_dev *cdev) bitmap_zero(f->endpoints, 32); } cdev->config = NULL; + cdev->delayed_status = 0; } static int set_config(struct usb_composite_dev *cdev, -- cgit v0.10.2 From 66fadea5b79c07154126bb0db375be915f611246 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 6 Nov 2013 09:25:27 +0100 Subject: usb: musb: only cancel work if it is initialized Since commit c5340bd14 ("usb: musb: cancel work on removal") the workqueue is cancelled but then if we bail out before the workqueue is setup we get this: |INFO: trying to register non-static key. |the code is fine but needs lockdep annotation. |turning off the locking correctness validator. |CPU: 0 PID: 708 Comm: modprobe Not tainted 3.12.0+ #435 |[] (lock_acquire+0xf0/0x108) from [] (flush_work+0x38/0x2ec) |[] (flush_work+0x38/0x2ec) from [] (__cancel_work_timer+0xa0/0x134) |[] (__cancel_work_timer+0xa0/0x134) from [] (musb_free+0x40/0x60 [musb_hdrc]) |[] (musb_free+0x40/0x60 [musb_hdrc]) from [] (musb_probe+0x678/0xb78 [musb_hdrc]) |[] (musb_probe+0x678/0xb78 [musb_hdrc]) from [] (platform_drv_probe+0x1c/0x24) |[] (platform_drv_probe+0x1c/0x24) from [] (driver_probe_device+0x90/0x224) |[] (driver_probe_device+0x90/0x224) from [] (bus_for_each_drv+0x60/0x8c) |[] (bus_for_each_drv+0x60/0x8c) from [] (device_attach+0x80/0xa4) |[] (device_attach+0x80/0xa4) from [] (bus_probe_device+0x88/0xac) |[] (bus_probe_device+0x88/0xac) from [] (device_add+0x388/0x6c8) |[] (device_add+0x388/0x6c8) from [] (platform_device_add+0x188/0x22c) |[] (platform_device_add+0x188/0x22c) from [] (dsps_probe+0x294/0x394 [musb_dsps]) |[] (dsps_probe+0x294/0x394 [musb_dsps]) from [] (platform_drv_probe+0x1c/0x24) |platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral |musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 This patch moves the init part to earlier part so it can be cleaned as part of the fail3 label because now it is surrounded by the fail4 label. Step two is to remove it from musb_free() and add it to the two cleanup paths (error path and device removal) separately. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0a43329..4d4499b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1809,7 +1809,6 @@ static void musb_free(struct musb *musb) disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } - cancel_work_sync(&musb->irq_work); musb_host_free(musb); } @@ -1896,6 +1895,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_platform_disable(musb); musb_generic_disable(musb); + /* Init IRQ workqueue before request_irq */ + INIT_WORK(&musb->irq_work, musb_irq_work); + /* setup musb parts of the core (especially endpoints) */ status = musb_core_init(plat->config->multipoint ? MUSB_CONTROLLER_MHDRC @@ -1905,9 +1907,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); - /* Init IRQ workqueue before request_irq */ - INIT_WORK(&musb->irq_work, musb_irq_work); - /* attach to the IRQ */ if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) { dev_err(dev, "request_irq %d failed!\n", nIrq); @@ -1981,6 +1980,7 @@ fail4: musb_host_cleanup(musb); fail3: + cancel_work_sync(&musb->irq_work); if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); fail2_5: @@ -2043,6 +2043,7 @@ static int musb_remove(struct platform_device *pdev) if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); + cancel_work_sync(&musb->irq_work); musb_free(musb); device_init_wakeup(dev, 0); return 0; -- cgit v0.10.2 From 97a27f7340b49d45719b9a3f25489c273e9a6f0d Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Thu, 7 Nov 2013 10:55:49 +0800 Subject: usb: phy: phy-mxs-usb: set the correct platform drvdata We need to set mxs_phy rather as the platform drvdata so that we can get the correct mxs_phy in mxs_phy_remove(). Signed-off-by: Jisheng Zhang Acked-by: Peter Chen Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index fdd33b4..545844b 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -164,7 +164,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->clk = clk; - platform_set_drvdata(pdev, &mxs_phy->phy); + platform_set_drvdata(pdev, mxs_phy); ret = usb_add_phy_dev(&mxs_phy->phy); if (ret) -- cgit v0.10.2 From bc912b0d237c1d376214616ae0c9d12b7d542ab4 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 4 Nov 2013 13:46:17 +0100 Subject: usb: gadget: f_mass_storage: fix mass storage dependency Legacy gadgets supporting mass storage (g_mass_storage, g_acm_ms, g_multi) all depend on BLOCK. Make the standalone compilation of f_mass_storage (without any legacy gadget) dependent no BLOCK, too. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index a91e642..f66d96a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -682,6 +682,7 @@ config USB_CONFIGFS_PHONET config USB_CONFIGFS_MASS_STORAGE boolean "Mass storage" depends on USB_CONFIGFS + depends on BLOCK select USB_F_MASS_STORAGE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. -- cgit v0.10.2 From 655403c21236af7b121c8c44618e60ff747acc87 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Mon, 4 Nov 2013 22:13:54 +0530 Subject: usb: gadget: mass storage: fix return of delayed status Mass storage gadget returns DELAYED_STATUS in stead of USB_GADGET_DELAYED_STATUS while handling bulk reset request. Since peripheral driver uses USB_GADGET_DELAYED_STATUS for delayed status handling, therefore replace DELAYED_STATUS by USB_GADGET_DELAYED_STATUS in mass storage driver. Since, DELAYED_STATUS and hence EP0_BUFSIZE will no longer be used now, so remove them. Signed-off-by: Pratyush Anand Cc: Paul Zimmerman Cc: Alan Stern Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a03ba2c..e5dd532 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -523,7 +523,7 @@ static int fsg_setup(struct usb_function *f, */ DBG(fsg, "bulk reset request\n"); raise_exception(fsg->common, FSG_STATE_RESET); - return DELAYED_STATUS; + return USB_GADGET_DELAYED_STATUS; case US_BULK_GET_MAX_LUN: if (ctrl->bRequestType != diff --git a/drivers/usb/gadget/storage_common.h b/drivers/usb/gadget/storage_common.h index c74c2fd..70c8914 100644 --- a/drivers/usb/gadget/storage_common.h +++ b/drivers/usb/gadget/storage_common.h @@ -119,10 +119,6 @@ static inline bool fsg_lun_is_open(struct fsg_lun *curlun) return curlun->filp != NULL; } -/* Big enough to hold our biggest descriptor */ -#define EP0_BUFSIZE 256 -#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ - /* Default size of buffer length. */ #define FSG_BUFLEN ((u32)16384) -- cgit v0.10.2 From a535d81c92615b8ffb99b7e1fd1fb01effaed1af Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 1 Nov 2013 12:05:12 -0400 Subject: usb: dwc3: fix implementation of endpoint wedge The dwc3 UDC driver doesn't implement endpoint wedging correctly. When an endpoint is wedged, the gadget driver should be allowed to clear the wedge by calling usb_ep_clear_halt(). Only the host is prevented from resetting the endpoint. This patch fixes the implementation. Signed-off-by: Alan Stern Tested-by: Pratyush Anand Cc: Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 95f7649..21a3520 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -459,6 +459,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, dep = dwc3_wIndex_to_dep(dwc, wIndex); if (!dep) return -EINVAL; + if (set == 0 && (dep->flags & DWC3_EP_WEDGE)) + break; ret = __dwc3_gadget_ep_set_halt(dep, set); if (ret) return -EINVAL; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 5452c0f..02e44fc 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1200,9 +1200,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) else dep->flags |= DWC3_EP_STALL; } else { - if (dep->flags & DWC3_EP_WEDGE) - return 0; - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); if (ret) @@ -1210,7 +1207,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) value ? "set" : "clear", dep->name); else - dep->flags &= ~DWC3_EP_STALL; + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); } return ret; -- cgit v0.10.2 From e8d68f88bcb4e336b308a05d1389e999f0b0c4b0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 25 Oct 2013 17:31:14 +0800 Subject: usb: phy: phy-generic: fix return value check in usb_nop_xceiv_register() In case of error, the function platform_device_register_simple() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 2d135b0..aa6d37b 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -48,8 +48,9 @@ void usb_nop_xceiv_register(void) if (pd) return; pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0); - if (!pd) { + if (IS_ERR(pd)) { pr_err("Unable to register generic usb transceiver\n"); + pd = NULL; return; } } -- cgit v0.10.2 From c8ba8115a21226fba3211085f570b128fa271e31 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Fri, 25 Oct 2013 21:07:12 +0400 Subject: usb: phy: phy-rcar-gen2-usb: fix phy initialization Add missing USB UGCTRL2 register offset. Signed-off-by: Valentine Barshak Acked-by: Simon Horman Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index a99a695..db3ab34 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -107,10 +107,10 @@ static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) clk_prepare_enable(priv->clk); /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base); + val = ioread32(priv->base + USBHS_UGCTRL2_REG); val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); val |= priv->ugctrl2; - iowrite32(val, priv->base); + iowrite32(val, priv->base + USBHS_UGCTRL2_REG); } /* Shutdown USB channels */ -- cgit v0.10.2 From f91d2f4337cdf8009da21cb93173099caf7981d4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:07:46 -0600 Subject: usb: gadget: storage: fix sparse warning fsg_common_set_inquiry_string() expects pointers as second and third argument. Let's fix that by passing NULL instead of plain 0 just so we silence sparse's: drivers/usb/gadget/f_mass_storage.c:3114:60: warning: \ Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3114:63: warning: \ Using plain integer as NULL pointer Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index e5dd532..1b2c19b 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3111,7 +3111,7 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) fsg->common->can_stall); if (ret) return ret; - fsg_common_set_inquiry_string(fsg->common, 0, 0); + fsg_common_set_inquiry_string(fsg->common, NULL, NULL); ret = fsg_common_run_thread(fsg->common); if (ret) return ret; -- cgit v0.10.2 From d07a59019d09fc71b6ae4de98478ae6375ee85ad Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Mon, 25 Nov 2013 11:10:59 -0600 Subject: usb: gadget: zero: module parameters can be static g_zero's module parameters can, and should, be static. This fixes sparse warnings. Cc: Peter Chen Signed-off-by: Fengguang Wu Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 0dd07ae..f49b0b6 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -91,17 +91,17 @@ static struct usb_zero_options gzero_options = { * functional coverage for the "USBCV" test harness from USB-IF. * It's always set if OTG mode is enabled. */ -unsigned autoresume = DEFAULT_AUTORESUME; +static unsigned autoresume = DEFAULT_AUTORESUME; module_param(autoresume, uint, S_IRUGO); MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); /* Maximum Autoresume time */ -unsigned max_autoresume; +static unsigned max_autoresume; module_param(max_autoresume, uint, S_IRUGO); MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup"); /* Interval between two remote wakeups */ -unsigned autoresume_interval_ms; +static unsigned autoresume_interval_ms; module_param(autoresume_interval_ms, uint, S_IRUGO); MODULE_PARM_DESC(autoresume_interval_ms, "milliseconds to increase successive wakeup delays"); -- cgit v0.10.2 From 63b12e3ecebd2904ee2e6c59911c7a44a0b18fa5 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:16:49 -0600 Subject: usb: gadget: ffs: fix sparse warning use NULL instead of 0 as pointer. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 774e8b8..241fc87 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1304,7 +1304,7 @@ static struct ffs_data *ffs_data_new(void) { struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL); if (unlikely(!ffs)) - return 0; + return NULL; ENTER(); -- cgit v0.10.2 From 3f79265c964ed501cd61eddfc893262d04a6aa4a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 25 Nov 2013 11:19:41 -0600 Subject: usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static that symbol is only used inside this function driver, we should mark it static. Fixes sparse's: drivers/usb/gadget/tcm_usb_gadget.c:373:6: warning: symbol \ 'bot_cleanup_old_alt' was not declared. Should it \ be static? Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 6c3d795..0f8aad7 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -370,7 +370,7 @@ err: return -ENOMEM; } -void bot_cleanup_old_alt(struct f_uas *fu) +static void bot_cleanup_old_alt(struct f_uas *fu) { if (!(fu->flags & USBG_ENABLED)) return; -- cgit v0.10.2 From 2cf93bea3d7b2dbf1e0ebfa9d381aad1b637e2aa Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 8 Nov 2013 10:50:52 +0530 Subject: usb: gadget: f_mass_storage: call try_to_freeze only when its safe Call try_to_freeze() in sleep_thread() only when it's safe to sleep. do_read() and do_write() calls sleep_thread with lock held. Make sure these won't call try_to_freeze() by passing can_freeze flag to sleep_thread. Calling try_to_freeze() with a lock hold was done since day one in f_mass_storage but since commit 0f9548ca1 ("lockdep: check that no locks held at freeze time") lockdep complains about it. Signed-off-by: George Cherian Acked-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 1b2c19b..b963939 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -602,13 +602,14 @@ static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) return true; } -static int sleep_thread(struct fsg_common *common) +static int sleep_thread(struct fsg_common *common, bool can_freeze) { int rc = 0; /* Wait until a signal arrives or we are woken up */ for (;;) { - try_to_freeze(); + if (can_freeze) + try_to_freeze(); set_current_state(TASK_INTERRUPTIBLE); if (signal_pending(current)) { rc = -EINTR; @@ -682,7 +683,7 @@ static int do_read(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, false); if (rc) return rc; } @@ -937,7 +938,7 @@ static int do_write(struct fsg_common *common) } /* Wait for something to happen */ - rc = sleep_thread(common); + rc = sleep_thread(common, false); if (rc) return rc; } @@ -1504,7 +1505,7 @@ static int throw_away_data(struct fsg_common *common) } /* Otherwise wait for something to happen */ - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -1625,7 +1626,7 @@ static int send_status(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -1828,7 +1829,7 @@ static int do_scsi_command(struct fsg_common *common) bh = common->next_buffhd_to_fill; common->next_buffhd_to_drain = bh; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2174,7 +2175,7 @@ static int get_next_command(struct fsg_common *common) /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2193,7 +2194,7 @@ static int get_next_command(struct fsg_common *common) /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { - rc = sleep_thread(common); + rc = sleep_thread(common, true); if (rc) return rc; } @@ -2379,7 +2380,7 @@ static void handle_exception(struct fsg_common *common) } if (num_active == 0) break; - if (sleep_thread(common)) + if (sleep_thread(common, true)) return; } @@ -2516,7 +2517,7 @@ static int fsg_main_thread(void *common_) } if (!common->running) { - sleep_thread(common); + sleep_thread(common, true); continue; } -- cgit v0.10.2 From b6dda00cddcc71d2030668bc0cc0fed758c411c2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 25 Nov 2013 17:26:46 +0100 Subject: ARM: mvebu: use the virtual CPU registers to access coherency registers The Armada XP provides a mechanism called "virtual CPU registers" or "per-CPU register banking", to access the per-CPU registers of the current CPU, without having to worry about finding on which CPU we're running. CPU0 has its registers at 0x21800, CPU1 at 0x21900, CPU2 at 0x21A00 and CPU3 at 0x21B00. The virtual registers accessing the current CPU registers are at 0x21000. However, in the Device Tree node that provides the register addresses for the coherency unit (which is responsible for ensuring coherency between processors, and I/O coherency between processors and the DMA-capable devices), a mistake was made: the CPU0-specific registers were specified instead of the virtual CPU registers. This means that the coherency barrier needed for I/O coherency was not behaving properly when executed from a CPU different from CPU0. This patch fixes that by using the virtual CPU registers. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Cc: # v3.8+ Fixes: e60304f8cb7bb5 "arm: mvebu: Add hardware I/O Coherency support" Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a79..7f10f62 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { -- cgit v0.10.2 From 96039f735e290281d0c8a08fc467de2cd610543d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 25 Nov 2013 17:26:47 +0100 Subject: ARM: mvebu: re-enable PCIe on Armada 370 DB Commit 14fd8ed0a7fd19913 ("ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes") relocated the PCIe controller DT nodes one level up in the Device Tree, to reflect a more correct representation of the hardware introduced by the mvebu-mbus Device Tree binding. However, while most of the boards were properly adjusted accordingly, the Armada 370 DB board was left unchanged, and therefore, PCIe is seen as not enabled on this board. This patch fixes that by moving the PCIe controller node one level-up in armada-370-db.dts. Signed-off-by: Thomas Petazzoni Cc: # v3.12+ Fixes: 14fd8ed0a7fd19913 "ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes" Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29d..08a56bc 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; -- cgit v0.10.2 From 12c3156f10c5d8c5f1fb3f0bbdb8c1ddb1d1f65c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 18 Nov 2013 10:59:59 -0700 Subject: PCI: Avoid unnecessary CPU switch when calling driver .probe() method If we are already on a CPU local to the device, call the driver .probe() method directly without using work_on_cpu(). This is a workaround for a lockdep warning in the following scenario: pci_call_probe work_on_cpu(cpu, local_pci_probe, ...) driver .probe pci_enable_sriov ... pci_bus_add_device ... pci_call_probe work_on_cpu(cpu, local_pci_probe, ...) It would be better to fix PCI so we don't call VF driver .probe() methods from inside a PF driver .probe() method, but that's a bigger project. [bhelgaas: open bugzilla, rework comments & changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=65071 Link: http://lkml.kernel.org/r/CAE9FiQXYQEAZ=0sG6+2OdffBqfLS9MpoN1xviRR9aDbxPxcKxQ@mail.gmail.com Link: http://lkml.kernel.org/r/20130624195942.40795.27292.stgit@ahduyck-cp1.jf.intel.com Tested-by: Yinghai Lu Signed-off-by: Alexander Duyck Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo Acked-by: Yinghai Lu diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9042fdb..7edd5c3 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -288,12 +288,27 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, int error, node; struct drv_dev_and_id ddi = { drv, dev, id }; - /* Execute driver initialization on node where the device's - bus is attached to. This way the driver likely allocates - its local memory on the right node without any need to - change it. */ + /* + * Execute driver initialization on node where the device is + * attached. This way the driver likely allocates its local memory + * on the right node. + */ node = dev_to_node(&dev->dev); - if (node >= 0) { + + /* + * On NUMA systems, we are likely to call a PF probe function using + * work_on_cpu(). If that probe calls pci_enable_sriov() (which + * adds the VF devices via pci_bus_add_device()), we may re-enter + * this function to call the VF probe function. Calling + * work_on_cpu() again will cause a lockdep warning. Since VFs are + * always on the same node as the PF, we can work around this by + * avoiding work_on_cpu() when we're already on the correct node. + * + * Preemption is enabled, so it's theoretically unsafe to use + * numa_node_id(), but even if we run the probe function on the + * wrong node, it should be functionally correct. + */ + if (node >= 0 && node != numa_node_id()) { int cpu; get_online_cpus(); @@ -305,6 +320,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, put_online_cpus(); } else error = local_pci_probe(&ddi); + return error; } -- cgit v0.10.2 From 12997d1a999cd1b22e21a238c96780f2a55e4e13 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 18 Nov 2013 11:00:29 -0700 Subject: Revert "workqueue: allow work_on_cpu() to be called recursively" This reverts commit c2fda509667b0fda4372a237f5a59ea4570b1627. c2fda509667b removed lockdep annotation from work_on_cpu() to work around the PCI path that calls work_on_cpu() from within a work_on_cpu() work item (PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver .probe method). 961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver .probe() method) avoids that recursive work_on_cpu() use in a different way, so this revert restores the work_on_cpu() lockdep annotation. Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 987293d..5690b8e 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2840,19 +2840,6 @@ already_gone: return false; } -static bool __flush_work(struct work_struct *work) -{ - struct wq_barrier barr; - - if (start_flush_work(work, &barr)) { - wait_for_completion(&barr.done); - destroy_work_on_stack(&barr.work); - return true; - } else { - return false; - } -} - /** * flush_work - wait for a work to finish executing the last queueing instance * @work: the work to flush @@ -2866,10 +2853,18 @@ static bool __flush_work(struct work_struct *work) */ bool flush_work(struct work_struct *work) { + struct wq_barrier barr; + lock_map_acquire(&work->lockdep_map); lock_map_release(&work->lockdep_map); - return __flush_work(work); + if (start_flush_work(work, &barr)) { + wait_for_completion(&barr.done); + destroy_work_on_stack(&barr.work); + return true; + } else { + return false; + } } EXPORT_SYMBOL_GPL(flush_work); @@ -4814,14 +4809,7 @@ long work_on_cpu(int cpu, long (*fn)(void *), void *arg) INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn); schedule_work_on(cpu, &wfc.work); - - /* - * The work item is on-stack and can't lead to deadlock through - * flushing. Use __flush_work() to avoid spurious lockdep warnings - * when work_on_cpu()s are nested. - */ - __flush_work(&wfc.work); - + flush_work(&wfc.work); return wfc.ret; } EXPORT_SYMBOL_GPL(work_on_cpu); -- cgit v0.10.2 From 4bff6749905d3abe7436d3b2d20b626886a04475 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 24 Nov 2013 01:17:52 +0100 Subject: PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) I'm seeing traces analogous to the one below in Thunderbolt testing: WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0() sysfs group ffffffff81c6c500 not found for kobject '0000:08' Modules linked in: ... CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76 Hardware name: Acer Aspire S5-391/Venus , BIOS V1.02 05/29/2012 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007 ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800 0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800 Call Trace: [] dump_stack+0x4e/0x71 [] warn_slowpath_common+0x87/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] ? sysfs_get_dirent_ns+0x6f/0x80 [] sysfs_remove_group+0x59/0xe0 [] dpm_sysfs_remove+0x3b/0x50 [] device_del+0x58/0x1c0 [] device_unregister+0x48/0x60 [] pci_remove_bus+0x6e/0x80 [] pci_remove_bus_device+0x38/0x110 [] pci_remove_bus_device+0x4d/0x110 [] pci_stop_and_remove_bus_device+0x19/0x20 [] disable_slot+0x20/0xe0 [] acpiphp_check_bridge+0xa8/0xd0 [] hotplug_event+0x17d/0x220 [] hotplug_event_work+0x30/0x70 [] acpi_hotplug_work_fn+0x18/0x24 [] process_one_work+0x261/0x450 [] worker_thread+0x21e/0x370 [] ? rescuer_thread+0x300/0x300 [] kthread+0xd2/0xe0 [] ? flush_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? flush_kthread_worker+0x70/0x70 (Mika Westerberg sees them too in his tests). Some investigation documented in kernel bug #65281 led me to the conclusion that the source of the problem is the device_del() in pci_stop_dev() as it now causes the sysfs directory of the device to be removed recursively along with all of its subdirectories. That includes the sysfs directory of the device's subordinate bus (dev->subordinate) and its "power" group. Consequently, when pci_remove_bus() is called for dev->subordinate in pci_remove_bus_device(), it calls device_unregister(&bus->dev), but at this point the sysfs directory of bus->dev doesn't exist any more and its "power" group doesn't exist either. Thus, when dpm_sysfs_remove() called from device_del() tries to remove that group, it triggers the above warning. That indicates a logical mistake in the design of pci_stop_and_remove_bus_device(), which causes bus device objects to be left behind their parents (bridge device objects) and can be fixed by moving the device_del() from pci_stop_dev() into pci_destroy_dev(), so pci_remove_bus() can be called for the device's subordinate bus before the device itself is unregistered from the hierarchy. Still, the driver, if any, should be detached from the device in pci_stop_dev(), so use device_release_driver() directly from there. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6 Reported-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 1576851..cc9337a 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev *dev) if (dev->is_added) { pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - device_del(&dev->dev); + device_release_driver(&dev->dev); dev->is_added = 0; } @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev *dev) static void pci_destroy_dev(struct pci_dev *dev) { + device_del(&dev->dev); + down_write(&pci_bus_sem); list_del(&dev->bus_list); up_write(&pci_bus_sem); -- cgit v0.10.2 From b49faea7655ec10ade15d7d007e4218ca578a513 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 14 Nov 2013 10:41:01 -0500 Subject: netfilter: ipset: fix incorret comparison in hash_netnet4_data_equal() Both sides of the comparison are the same, looks like a cut-and-paste error. Spotted by Coverity. Signed-off-by: Dave Jones Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipset/ip_set_hash_netnet.c b/net/netfilter/ipset/ip_set_hash_netnet.c index 2bc2dec..6226803 100644 --- a/net/netfilter/ipset/ip_set_hash_netnet.c +++ b/net/netfilter/ipset/ip_set_hash_netnet.c @@ -59,7 +59,7 @@ hash_netnet4_data_equal(const struct hash_netnet4_elem *ip1, u32 *multi) { return ip1->ipcmp == ip2->ipcmp && - ip2->ccmp == ip2->ccmp; + ip1->ccmp == ip2->ccmp; } static inline int -- cgit v0.10.2 From ecf61c78bd787b9dfb4a6b1dfb7561c2a95c5c17 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 11 Nov 2013 14:40:35 +0100 Subject: PCI: Omit PCI ID macro strings to shorten quirk names Pasting the verbatim PCI_(VENDOR|DEVICE)_* macros in the __pci_fixup_* symbol names results in insanely long names such as __pci_fixup_resumePCI_VENDOR_ID_SERVERWORKSPCI_DEVICE_ID_SERVERWORKS_HT1000SBquirk_disable_broadcom_boot_interrupt When Link-Time Optimization adds its numeric suffix to such symbol, it overflows the namebuf[KSYM_NAME_LEN] array in kernel/kallsyms.c. Use the line number instead to create (nearly) unique symbol names. Reported-by: Joe Mario Signed-off-by: Michal Marek Signed-off-by: Bjorn Helgaas Cc: Andi Kleen diff --git a/include/linux/pci.h b/include/linux/pci.h index 1084a15..eb8078a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1567,65 +1567,65 @@ enum pci_fixup_pass { /* Anonymous variables would be nice... */ #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ class_shift, hook) \ - static const struct pci_fixup __pci_fixup_##name __used \ + static const struct pci_fixup __PASTE(__pci_fixup_##name,__LINE__) __used \ __attribute__((__section__(#section), aligned((sizeof(void *))))) \ = { vendor, device, class, class_shift, hook }; #define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, class, class_shift, hook) + hook, vendor, device, class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, class, \ + resume##hook, vendor, device, class, \ class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, \ + resume_early##hook, vendor, device, \ class, class_shift, hook) #define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \ class_shift, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, class, \ + suspend##hook, vendor, device, class, \ class_shift, hook) #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) + hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, \ + resume##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, \ + resume_early##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, \ + suspend##hook, vendor, device, \ PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS -- cgit v0.10.2 From 7ce93f3186119754ec7a646bcbeb1f80e4214767 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Fix more missing data for omap3.dtsi file After dropping the duplicate data in hwmod that now should come from the .dts files, I noticed few more entries missing. Let's add these as otherwise devices relying on these won't work. Looks like the side tone entries are bundled into the mcbsp1 to 3, so that may needs some special handling in the hwmod code as it's currently trying to look up mcbsp2_sidetone and mcbsp3_sidetone entries. Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26..daabf99 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; -- cgit v0.10.2 From 26f67a31265d459aa6f93b0a1ecbd64e7435519d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig We do not have REGULATOR_FIXED selected if no boards are selected and we boot with device tree. This can cause various devices to fail. Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c3..bfa80a1 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y -- cgit v0.10.2 From edd5eb4e99e4153ea7be05390fda542d986bf28d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Fix eMMC on n900 with device tree Looks like we need to configure the regulators and use the pdata quirk to make eMMC work with device tree. It seems that mostly vaux3 is used, and only some earlier revisions used vmmc2. This has been tested to work on devices where the system_rev passed by the bootloader has versions 0x0010, 0x2101 and 0x2204. Cc: devicetree@vger.kernel.org Cc: Pavel Machek Cc: Aaro Koskinen Signed-off-by: Sebastian Reichel [tony@atomide.com: updated with pinctrl changes and comments from Sebastian] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bf..c2c306d 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c7145..39f020c 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, -- cgit v0.10.2 From e4cfb034e89a1c7148f617735d92a3655d27773f Mon Sep 17 00:00:00 2001 From: Andrew Liu Date: Sat, 23 Nov 2013 10:06:36 -0800 Subject: Input: keyboard - "keycode & KEY_MAX" changes some keycode values For exmaple, keycode: KEY_OK(0x160) is changed by "and" operation with KEY_MAX(0x2ff) to KEY_KPENTER(96). Signed-off-by: Andrew Liu Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index dbd2047..3ed2351 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -536,7 +536,8 @@ static int adp5588_probe(struct i2c_client *client, __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); if (kpad->gpimapsize) diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index 67d12b3..60dafd4 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -992,7 +992,8 @@ static int adp5589_probe(struct i2c_client *client, __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); if (kpad->gpimapsize) diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index fc88fb4..09b91d0 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -289,7 +289,8 @@ static int bfin_kpad_probe(struct platform_device *pdev) __set_bit(EV_REP, input->evbit); for (i = 0; i < input->keycodemax; i++) - __set_bit(bf54x_kpad->keycode[i] & KEY_MAX, input->keybit); + if (bf54x_kpad->keycode[i] <= KEY_MAX) + __set_bit(bf54x_kpad->keycode[i], input->keybit); __clear_bit(KEY_RESERVED, input->keybit); error = input_register_device(input); diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c index e373929..0deca5a 100644 --- a/drivers/input/misc/pcf8574_keypad.c +++ b/drivers/input/misc/pcf8574_keypad.c @@ -113,9 +113,12 @@ static int pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_i idev->keycodemax = ARRAY_SIZE(lp->btncode); for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) { - lp->btncode[i] = pcf8574_kp_btncode[i]; - __set_bit(lp->btncode[i] & KEY_MAX, idev->keybit); + if (lp->btncode[i] <= KEY_MAX) { + lp->btncode[i] = pcf8574_kp_btncode[i]; + __set_bit(lp->btncode[i], idev->keybit); + } } + __clear_bit(KEY_RESERVED, idev->keybit); sprintf(lp->name, DRV_NAME); sprintf(lp->phys, "kp_data/input0"); -- cgit v0.10.2 From 6ac6b475c56ce4bbaf36b02db7d1372f2e17aeec Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Sat, 28 Sep 2013 15:34:57 +0100 Subject: extcon: arizona: Get pdata from arizona structure not device In the case of a device tree system there will be no pdata attached to the device, causing us to deference a NULL pointer. Better to take the pdata from the Arizona structure as this will always exist and we know will have been populated since it is populated by the MFD device which binds in the extcon driver. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 3c55ec8..a287cec 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1082,7 +1082,7 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, static int arizona_extcon_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); - struct arizona_pdata *pdata; + struct arizona_pdata *pdata = &arizona->pdata; struct arizona_extcon_info *info; unsigned int val; int jack_irq_fall, jack_irq_rise; @@ -1091,8 +1091,6 @@ static int arizona_extcon_probe(struct platform_device *pdev) if (!arizona->dapm || !arizona->dapm->card) return -EPROBE_DEFER; - pdata = dev_get_platdata(arizona->dev); - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "Failed to allocate memory\n"); -- cgit v0.10.2 From 7585ca0dc950583be7fc62099ca43a0c9551a875 Mon Sep 17 00:00:00 2001 From: "Wang, Xiaoming" Date: Fri, 1 Nov 2013 18:48:14 -0400 Subject: extcon: remove freed groups caused the panic or warning in unregister flow (edev->extcon_dev_type.groups) has been freed before device_unregister. extcon_dev_unregister -> kfree(edev->extcon_dev_type.groups) then device_unregister -> device_del -> device_remove_attrs -> device_remove_groups(dev, type->groups); panic because type->groups has been freed. This patch is move device_unregister ahead of groups free to avoid panic in extcon_dev_unregister. stack [ 22.847226] BUG: unable to handle kernel paging request at 5f39746e [ 22.847234] IP: [] sysfs_remove_group+0x2d/0xd0 [ 22.847238] *pdpt = 0000000000000000 *pde = 0000000000000000 [ 22.847241] Oops: 0000 [#1] PREEMPT SMP [ 22.847244] Modules linked in: [ 22.847249] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.16-261140-g6533774 #1 [ 22.847251] task: f3078000 ti: f3072000 task.ti: f3072000 [ 22.847254] EIP: 0060:[] EFLAGS: 00010206 CPU: 0 [ 22.847257] EIP is at sysfs_remove_group+0x2d/0xd0 [ 22.847259] EAX: 00000004 EBX: 5f39746e ECX: 00000000 EDX: f2773560 [ 22.847261] ESI: f2653b80 EDI: f2773560 EBP: f3073c90 ESP: f3073c70 [ 22.847263] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 22.847264] CR0: 8005003b CR2: 5f39746e CR3: 020e5000 CR4: 001007f0 [ 22.847266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 22.847268] DR6: ffff0ff0 DR7: 00000400 [ 22.847269] Stack: [ 22.847276] c13848c9 c1ae3805 f3073c80 f24ddc4c 00000246 f2773e88 f1c44408 f2531340 [ 22.847283] f3073ca0 c16935ca f1c44400 f27d3340 f3073cb4 c1693858 f24ddc44 f1c44400 [ 22.847289] f1c4420c f3073cc8 c1693f76 f1c44400 00000001 00000000 f3073ce8 c1694011 [ 22.847290] Call Trace: [ 22.847295] [] ? sysfs_hash_and_remove+0x49/0xa0 [ 22.847300] [] ? sub_preempt_count+0x55/0xe0 [ 22.847306] [] device_remove_groups+0x2a/0x40 [ 22.847309] [] device_remove_attrs+0x38/0x60 [ 22.847313] [] device_del+0xd6/0x150 [ 22.847316] [] device_unregister+0x21/0x60 [ 22.847320] [] ? sysfs_remove_link+0x18/0x30 [ 22.847323] [] ? class_compat_remove_link+0x34/0x50 [ 22.847329] [] extcon_dev_unregister+0xf9/0x130 [ 22.847333] [] pwrsrc_extcon_dev_reg_callback+0x7f/0xa0 [ 22.847337] [] notifier_call_chain+0x43/0x60 [ 22.847343] [] __blocking_notifier_call_chain+0x41/0x80 [ 22.847347] [] blocking_notifier_call_chain+0x1f/0x30 [ 22.847351] [] extcon_dev_notify_add_device+0x19/0x20 [ 22.847354] [] extcon_dev_register+0x134/0x580 [ 22.847358] [] ? sub_preempt_count+0x55/0xe0 [ 22.847363] [] ? gpiod_request+0x6a/0x1d0 [ 22.847368] [] ? kmem_cache_alloc_trace+0xaa/0x170 [ 22.847372] [] ? fsa9285_probe+0x99/0x3f0 [ 22.847375] [] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847379] [] fsa9285_probe+0xbf/0x3f0 [ 22.847383] [] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847388] [] i2c_device_probe+0x7e/0xf0 [ 22.847392] [] ? sysfs_create_link+0x22/0x40 [ 22.847395] [] ? driver_sysfs_add+0x72/0xa0 [ 22.847399] [] driver_probe_device+0x79/0x360 [ 22.847403] [] __driver_attach+0x91/0xa0 [ 22.847407] [] ? driver_probe_device+0x360/0x360 [ 22.847410] [] bus_for_each_dev+0x42/0x80 [ 22.847414] [] driver_attach+0x1e/0x20 [ 22.847417] [] ? driver_probe_device+0x360/0x360 [ 22.847420] [] bus_add_driver+0xef/0x270 [ 22.847425] [] ? i2c_device_probe+0xf0/0xf0 [ 22.847428] [] ? i2c_device_probe+0xf0/0xf0 [ 22.847432] [] driver_register+0x6a/0x160 [ 22.847436] [] ? mutex_unlock+0xd/0x10 [ 22.847440] [] ? __create_file+0x122/0x2a0 [ 22.847446] [] ? extcon_class_init+0x15/0x15 [ 22.847450] [] i2c_register_driver+0x2b/0xd0 [ 22.847454] [] ? debugfs_create_file+0x35/0x40 [ 22.847458] [] ? extcon_class_init+0x15/0x15 [ 22.847461] [] fsa9285_extcon_init+0x11/0x29 [ 22.847465] [] do_one_initcall+0xba/0x170 [ 22.847471] [] kernel_init_freeable+0x119/0x1b8 [ 22.847475] [] ? do_early_param+0x7a/0x7a [ 22.847480] [] kernel_init+0x10/0xd0 [ 22.847485] [] ret_from_kernel_thread+0x1b/0x28 [ 22.847488] [] ? rest_init+0x80/0x80 Tested-by: Liu, Chuansheng Reviewed-by: Liu, Chuansheng Signed-off-by: xiaoming wang Signed-off-by: Zhang Dongxing Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 15443d3..7632233 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -792,6 +792,8 @@ void extcon_dev_unregister(struct extcon_dev *edev) return; } + device_unregister(&edev->dev); + if (edev->mutually_exclusive && edev->max_supported) { for (index = 0; edev->mutually_exclusive[index]; index++) @@ -812,7 +814,6 @@ void extcon_dev_unregister(struct extcon_dev *edev) if (switch_class) class_compat_remove_link(switch_class, &edev->dev, NULL); #endif - device_unregister(&edev->dev); put_device(&edev->dev); } EXPORT_SYMBOL_GPL(extcon_dev_unregister); -- cgit v0.10.2 From 72ac01274a8e03eb39756284edb4aa2804599d23 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 18 Nov 2013 18:25:59 +0100 Subject: mfd: Make MFD_AS3722 depend on I2C=y MFD_AS3722 can only be builtin, so it needs I2C builtin as well. With I2C=m, we get: drivers/mfd/as3722.c:372: undefined reference to `devm_regmap_init_i2c' drivers/built-in.o: In function `as3722_i2c_driver_init': drivers/mfd/as3722.c:444: undefined reference to `i2c_register_driver' drivers/built-in.o: In function `as3722_i2c_driver_exit': drivers/mfd/as3722.c:444: undefined reference to `i2c_del_driver' Signed-off-by: Michal Marek Signed-off-by: Lee Jones diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 62a60ca..dd67158 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -32,7 +32,7 @@ config MFD_AS3722 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C && OF + depends on I2C=y && OF help The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down -- cgit v0.10.2 From c37dd677988ca50bc8bc60ab5ab053720583c168 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 11 Nov 2013 20:41:38 +0200 Subject: ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig (LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled, the following BUG is seen during the boot: [ 7.302154] ===================================== [ 7.307128] [ BUG: bad unlock balance detected! ] [ 7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted [ 7.318450] ------------------------------------- [ 7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at: [ 7.330657] [] acx565akm_enable+0x12c/0x18c [ 7.335998] but there are no more locks to release! Fix by removing double unlock and handling the locking completely inside acx565akm_panel_power_on() when doing the power on. Reported-by: Eduardo Valentin Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c index e6d56f7..d94f35d 100644 --- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c +++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c @@ -526,6 +526,8 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev) struct omap_dss_device *in = ddata->in; int r; + mutex_lock(&ddata->mutex); + dev_dbg(&ddata->spi->dev, "%s\n", __func__); in->ops.sdi->set_timings(in, &ddata->videomode); @@ -614,10 +616,7 @@ static int acx565akm_enable(struct omap_dss_device *dssdev) if (omapdss_device_is_enabled(dssdev)) return 0; - mutex_lock(&ddata->mutex); r = acx565akm_panel_power_on(dssdev); - mutex_unlock(&ddata->mutex); - if (r) return r; -- cgit v0.10.2 From 6c5dc7f8afbd2f480ebe9ff6919c6420fcf1abd6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 18 Nov 2013 15:20:01 +1100 Subject: crypto: caam - Add missing Job Ring include linuxnext currently doesn't compile with the powerpc mpc85xx_defconfig giving: drivers/crypto/caam/jr.c: In function 'caam_jr_probe': drivers/crypto/caam/jr.c:468:2: error: implicit declaration of function 'of_iomap' [-Werror=implicit-function-declaration] In: commit 313ea293e9c4d1eabcaddd2c0800f083b03c2a2e Author: Ruchika Gupta crypto: caam - Add Platform driver for Job Ring We added a reference to of_iomap but did add the necessary include file. The below adds this include. Signed-off-by: Michael Neuling Acked-by: Ruchika Gupta Signed-off-by: Herbert Xu diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index d23356d2..1d80bd3 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -6,6 +6,7 @@ */ #include +#include #include "compat.h" #include "regs.h" -- cgit v0.10.2 From 6b8e090ecc3dc977fe2eabf6e50bb3870de9ebac Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Nov 2013 15:12:47 -0700 Subject: regmap: use IS_ERR() to check clk_get() results clk_get() returns an error pointer, or a valid token to pass back to the clock API. Hence, the result must be checked with IS_ERR(), not by comparison against NULL. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c index 98745dd..81f9775 100644 --- a/drivers/base/regmap/regmap-mmio.c +++ b/drivers/base/regmap/regmap-mmio.c @@ -40,7 +40,7 @@ static int regmap_mmio_gather_write(void *context, BUG_ON(reg_size != 4); - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { ret = clk_enable(ctx->clk); if (ret < 0) return ret; @@ -73,7 +73,7 @@ static int regmap_mmio_gather_write(void *context, offset += ctx->val_bytes; } - if (ctx->clk) + if (!IS_ERR(ctx->clk)) clk_disable(ctx->clk); return 0; @@ -96,7 +96,7 @@ static int regmap_mmio_read(void *context, BUG_ON(reg_size != 4); - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { ret = clk_enable(ctx->clk); if (ret < 0) return ret; @@ -129,7 +129,7 @@ static int regmap_mmio_read(void *context, offset += ctx->val_bytes; } - if (ctx->clk) + if (!IS_ERR(ctx->clk)) clk_disable(ctx->clk); return 0; @@ -139,7 +139,7 @@ static void regmap_mmio_free_context(void *context) { struct regmap_mmio_context *ctx = context; - if (ctx->clk) { + if (!IS_ERR(ctx->clk)) { clk_unprepare(ctx->clk); clk_put(ctx->clk); } @@ -209,6 +209,7 @@ static struct regmap_mmio_context *regmap_mmio_gen_context(struct device *dev, ctx->regs = regs; ctx->val_bytes = config->val_bits / 8; + ctx->clk = ERR_PTR(-ENODEV); if (clk_id == NULL) return ctx; -- cgit v0.10.2 From 2ab68ec927310dc488f3403bb48f9e4ad00a9491 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 19 Nov 2013 14:25:36 -0500 Subject: video: kyro: fix incorrect sizes when copying to userspace kyro would copy u32s and specify sizeof(unsigned long) as the size to copy. This would copy more data than intended and cause memory corruption and might leak kernel memory. Signed-off-by: Sasha Levin Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c index 50c8574..65041e1 100644 --- a/drivers/video/kyro/fbdev.c +++ b/drivers/video/kyro/fbdev.c @@ -624,15 +624,15 @@ static int kyrofb_ioctl(struct fb_info *info, return -EINVAL; } case KYRO_IOCTL_UVSTRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride))) return -EFAULT; break; case KYRO_IOCTL_STRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride))) return -EFAULT; break; case KYRO_IOCTL_OVERLAY_OFFSET: - if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset))) return -EFAULT; break; } -- cgit v0.10.2 From 974dbcfcca1ee88279e274051e1719b4980ebdb3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Nov 2013 09:57:27 +0100 Subject: fbdev: sh_mobile_meram: Fix defined but not used compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are not set: drivers/video/sh_mobile_meram.c:573: warning: ‘sh_mobile_meram_suspend’ defined but not used drivers/video/sh_mobile_meram.c:597: warning: ‘sh_mobile_meram_resume’ defined but not used Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index e0f0985..a297de5 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -569,6 +569,7 @@ EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_update); * Power management */ +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) static int sh_mobile_meram_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -611,6 +612,7 @@ static int sh_mobile_meram_resume(struct device *dev) meram_write_reg(priv->base, common_regs[i], priv->regs[i]); return 0; } +#endif /* CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME */ static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops, sh_mobile_meram_suspend, -- cgit v0.10.2 From 427bfe07e6744c058ce6fc4aa187cda96b635539 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 14 Nov 2013 14:29:52 -0700 Subject: xen-blkfront: Silence pfn maybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pfn cannot actually be used unless (!info->feature_persistent), nor is pfn accessed in get_grant() unless (!info->feature_persistent), but silence this warning anyway. gcc-4.8 drivers/block/xen-blkfront.c: In function 'do_blkif_request': drivers/block/xen-blkfront.c:508:20: warning: 'pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] gnt_list_entry = get_grant(&gref_head, pfn, info); ^ drivers/block/xen-blkfront.c:492:19: note: 'pfn' was declared here unsigned long pfn; Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Signed-off-by: Tim Gardner Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Roger Pau Monné diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 432db1b..5f926de 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -489,7 +489,7 @@ static int blkif_queue_request(struct request *req) if ((ring_req->operation == BLKIF_OP_INDIRECT) && (i % SEGS_PER_INDIRECT_FRAME == 0)) { - unsigned long pfn; + unsigned long uninitialized_var(pfn); if (segments) kunmap_atomic(segments); -- cgit v0.10.2 From 2f089cb89d2f47702c31bd584c12badc88bbe17c Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 13:36:09 -0200 Subject: block: xen-blkfront: Fix possible NULL ptr dereference In the blkif_release function the bdget_disk() call might returns a NULL ptr which might be dereferenced on bdev->bd_openers checking Signed-off-by: Felipe Pena Signed-off-by: Konrad Rzeszutek Wilk [v2: Added WARN per Roger's suggestion] diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 5f926de..c4a4c90 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2011,6 +2011,10 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) bdev = bdget_disk(disk, 0); + if (!bdev) { + WARN(1, "Block device %s yanked out from us!\n", disk->disk_name); + goto out_mutex; + } if (bdev->bd_openers) goto out; @@ -2041,6 +2045,7 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) out: bdput(bdev); +out_mutex: mutex_unlock(&blkfront_mutex); } -- cgit v0.10.2 From c297c8b99b07f496ff69a719cfb8e8fe852832ed Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Wed, 20 Nov 2013 13:00:17 -0500 Subject: SUNRPC: do not fail gss proc NULL calls with EACCES Otherwise RPCSEC_GSS_DESTROY messages are not sent. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 97912b4..42fdfc6 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1517,7 +1517,7 @@ out: static int gss_refresh_null(struct rpc_task *task) { - return -EACCES; + return 0; } static __be32 * -- cgit v0.10.2 From 7c063c725987406d743cc7de7625ff224fab75de Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 26 Nov 2013 09:13:41 -0800 Subject: drm/i915: take mode config lock around crtc disable at suspend This is just a theoretical issue, but we need to do this to prevent the WARN in pipe_from_connector at suspend time. This regression has been introduce in commit 7bd688cd66db93f6430f6e2b3145ee5686daa315 Author: Jani Nikula Date: Fri Nov 8 16:48:56 2013 +0200 drm/i915: handle backlight through chip specific functions https://bugs.freedesktop.org/show_bug.cgi?id=71978 Signed-off-by: Jesse Barnes Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 989be12..2e367a1 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -534,8 +534,10 @@ static int i915_drm_freeze(struct drm_device *dev) * Disable CRTCs directly since we want to preserve sw state * for _thaw. */ + mutex_lock(&dev->mode_config.mutex); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) dev_priv->display.crtc_disable(crtc); + mutex_unlock(&dev->mode_config.mutex); intel_modeset_suspend_hw(dev); } -- cgit v0.10.2 From f407dae76040c9529c2c83b1488dda4ffc54522c Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 26 Nov 2013 11:27:28 -0700 Subject: PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin The emulated bridge does not support interrupts, so it should return the value 0 for Interrupt Line and Interrupt Pin. This indicates that interrupts are not supported. Since Max_Lat and Min_Gnt are also in the same 32-bit word, we return 0 for them, which means "do not care." This corrects an error message from the kernel: pci 0000:00:01.0: of_irq_parse_pci() failed with rc=135 Which is due to the default return of 0xFFFFFFFF indicating that interrupts are supported. The error message regression was caused by 16b84e5a505 ("of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.") Signed-off-by: Jason Gunthorpe Signed-off-by: Bjorn Helgaas Acked-by: Jason Cooper diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index c269e43..2aa7b77c 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -447,6 +447,11 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, *value = 0; break; + case PCI_INTERRUPT_LINE: + /* LINE PIN MIN_GNT MAX_LAT */ + *value = 0; + break; + default: *value = 0xffffffff; return PCIBIOS_BAD_REGISTER_NUMBER; -- cgit v0.10.2 From a09b5add6f2458486df42a4431a0599f18fa8f52 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Thu, 18 Jul 2013 21:35:30 +0200 Subject: u8500_defconfig: allow creation and mounting of devtmpfs This patch enables CONFIG_DETTMPFS and CONFIG_DEVTMPFS_MOUNT flags for u8500 based devices. In this way it's possible to create a tmpfs/ramfs already in the early stages of the boot, allowing programs like udev/mdev to populate the /dev directory. Signed-off-by: Andi Shyti Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc..3738cd6 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -109,6 +109,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set -- cgit v0.10.2 From 59b023e9bf62933f7078dec339b110d5785f63f6 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 30 Sep 2013 13:36:36 +0200 Subject: ARM: ux500: u8500_defconfig: add missing cpuidle option With the commit d3f2950f2adeea3da0317e952914b59adaa4cdb3, the option ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the default config file, hence the cpuidle driver is no longer enabled since this commit. Enable it again by adding the missing option in the default config file. Signed-off-by: Daniel Lezcano Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 3738cd6..c6ebc18 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y -- cgit v0.10.2 From 1f202dea74713589f2af29f1dba3ac6de043618a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:28:53 +0100 Subject: Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings" This reverts commit ce16feb8510cbbcd090c2320c35db2fbbffde210. This commit stopped tying down the name of the MMC/SD devices, but these names are used in the pin control table, so the MMC/SD cards stopped working. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e..8e7e60d 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, -- cgit v0.10.2 From 5281973012bdcfd93a8f6e0f5b4e04af0038ea99 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:33:36 +0100 Subject: Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots" This reverts commit 49c129519a7a8840767321c38d2eaf84a263529b. The special settings for the SD/MMC card parameters that are not yet fully agreed upon how to encode into the device tree went missing with this commit. We need to first put it into the device tree, and then remove the platform data. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8e7e60d..12c7e5c 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,10 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, -- cgit v0.10.2 From 912e663127c5f700da6805ce21635dce703cb2cc Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx (much like other OMAPs). Reference discussions on forums [1] [2]. Earlier patch solving this on other OMAPs [3]. For OMAP SoCs with this errata, the fix has been to not enable Posted mode. However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode is enabled on reset. So we not only need to ignore enabling of the POSTED bit when the timer is requested, but also disable Posted mode if errata is present. [1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx [2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx [3] http://www.spinics.net/lists/linux-omap/msg81770.html Cc: stable@vgerk.kernel.org Reported-by: Russ Dill Cc: Santosh Shilimkar Signed-off-by: Joel Fernandes Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb..2861b15 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); -- cgit v0.10.2 From 11d3a7d6d4c1df43240cc8b8aaa2dcff4e3fe072 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus. When booting with Device Trees the requested bus number is set to -1 which means that the bus number should be dynamically assigned. So the third i2c bus has 2 has a bus number. Since now only DT booting is supported for IGEP boards after commit 06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the i2c bus number has to be changed. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3..dadccc9 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { -- cgit v0.10.2 From 8559133d82560a8b1f5d32419c6c829d81b89fb1 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: dts: omap3-igep: Fix bus-width for mmc1 Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and do not mux data pins from mmc1_data4 to mmc1_data7. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b..d4fecce 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -65,10 +65,6 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ >; }; @@ -114,7 +110,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { -- cgit v0.10.2 From 0e9fd77771d0a0c3318905d33f29eec7680dfe5e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using the same MMC interface and uses the same GPIOs. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d4fecce..b3517b2 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -68,6 +96,17 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + smsc911x_pins: pinmux_smsc911x_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ @@ -114,7 +153,11 @@ }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { -- cgit v0.10.2 From 9aa36dfd3d9a1c9e305e53f5c0915036c3941a3f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor Most of the boards are using the TI AM/DM37x processor, there is only a small quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support for the 34xx based variant later on as needed. To avoid confusion we have added to the model the (TI AM/DM37x) comment. Signed-off-by: Enric Balletbo i Serra [tony@atomide.com: updated comments for the 34xx to 36xx include change] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b3517b2..e4c8769 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc792..33ce123 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9..02a23f8 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { -- cgit v0.10.2 From d526daebfd88706b52573325920dac33d14a5f6c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices Add pin muxing support for IGEP boards i2c controllers. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index e4c8769..165aaf7 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -113,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -136,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; -- cgit v0.10.2 From 50592dc30ca3617b7b66abd7071930e2489bff26 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: omap3-igep0020: Add pinmuxing for DVI output The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's Display SubSystem (DSS). Add mux setup for DSS pins and also for the GPIO 170 pin that is used to ensure that the DVI-D is powered down on power up. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 33ce123..b9a9e17 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { -- cgit v0.10.2 From 0710b679862dc730eb9900592649929da3ec824e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2..620970c 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,50 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; +}; + +&lcdc { + status = "okay"; }; -- cgit v0.10.2 From f3689fd6dd30974d5b5ccf1daea964440ca5955f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add pinmux and user led support Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds, one green and one red, that are controllable by software. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 620970c..ffae148 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -22,6 +22,25 @@ pinctrl-1 = <&nxp_hdmi_off_pins>; status = "okay"; }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; }; &am33xx_pinmux { @@ -55,6 +74,13 @@ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; }; &lcdc { -- cgit v0.10.2 From d8e5b2bdd3674a65f3f50fb54061516d4b6c999f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index ffae148..72a9b3f 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -86,3 +86,10 @@ &lcdc { status = "okay"; }; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; +}; -- cgit v0.10.2 From caa73370ead3160ed6cdabbfeecc5fbbda06d903 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: AM33XX IGEP0033: add USB support Add node to support the USB Host and the USB OTG on the IGEP AQUILA Processor Board. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 6196244..7063311 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { -- cgit v0.10.2 From 2f2befd820252d05be7b1f5528a57af85338f59c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi On Device Tree boot the VDDS_DSI regulator is not linked to the DPI device so omapfb driver probing fails with: [ 3.186035] OMAPFB: omapfb_probe [ 3.190704] omapdss DPI error: can't get VDDS_DSI regulator [ 3.196594] omapfb omapfb: failed to connect default display [ 3.202667] omapfb omapfb: failed to init overlay connections [ 3.208892] OMAPFB: free_resources [ 3.212493] OMAPFB: free all fbmem [ 3.216735] omapfb omapfb: failed to setup omapfb As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi so getting the VDDS_DSI regulator will succeed on dpi_init_regulator(). Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index b9a9e17..1c7e74d 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -215,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; -- cgit v0.10.2 From 30023a7e4fef11c596fd7f3c323035c49dfaed85 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply for the USB PHY. As the generic PHY driver can't handle more than one supply at the moment, we configure this supply to be always on. This will cause a very small power impact if the USB host subsystem is not in use, about 76.86 micro-W + LDO power. Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere, so there won't be any functional impact on those boards other than some additional LDO power consumption. Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f..df33a50 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aa..4e384fc 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -178,3 +178,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; -- cgit v0.10.2 From 31ee9181eb92cc727876ec5a2144a1b3cbdf5bb1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: mmc: omap: Fix DMA configuration to not rely on device id We are wrongly relying on device id for the DMA configuration which can lead to wrong DMA channel being selected. Fix the issue by using the standard resources like we should. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 0b10a90..2299587 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -90,17 +90,6 @@ #define OMAP_MMC_CMDTYPE_AC 2 #define OMAP_MMC_CMDTYPE_ADTC 3 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 - -#define OMAP24XX_DMA_MMC2_TX 47 -#define OMAP24XX_DMA_MMC2_RX 48 -#define OMAP24XX_DMA_MMC1_TX 61 -#define OMAP24XX_DMA_MMC1_RX 62 - - #define DRIVER_NAME "mmci-omap" /* Specifies how often in millisecs to poll for card status changes @@ -1330,7 +1319,7 @@ static int mmc_omap_probe(struct platform_device *pdev) struct mmc_omap_host *host = NULL; struct resource *res; dma_cap_mask_t mask; - unsigned sig; + unsigned sig = 0; int i, ret = 0; int irq; @@ -1407,19 +1396,20 @@ static int mmc_omap_probe(struct platform_device *pdev) host->dma_tx_burst = -1; host->dma_rx_burst = -1; - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX; - host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (res) + sig = res->start; + host->dma_tx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "tx"); if (!host->dma_tx) dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n", sig); - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX; - host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (res) + sig = res->start; + host->dma_rx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "rx"); if (!host->dma_rx) dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n", sig); -- cgit v0.10.2 From 9cb238c00ba5c1ddfff2c2ed6aa66c15b962e4c3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: mmc: omap: Fix I2C dependency and make driver usable with device tree Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 0000000..8de5799 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 2299587..98b6b6e 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1329,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev) } if (pdata->nr_slots == 0) { dev_err(&pdev->dev, "no slots\n"); - return -ENXIO; + return -EPROBE_DEFER; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1502,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev) return 0; } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id mmc_omap_match[] = { + { .compatible = "ti,omap2420-mmc", }, + { }, +}; +#endif + static struct platform_driver mmc_omap_driver = { .probe = mmc_omap_probe, .remove = mmc_omap_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mmc_omap_match), }, }; -- cgit v0.10.2 From 358f24704f2f016af7d504b357cdf32606091d07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 26 Nov 2013 11:17:02 -0800 Subject: Input: add key code for ambient light sensor button MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many notebooks have a special button for enabling/disabling ambient light sensor. Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index a372627..7bacdb5 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -719,6 +719,8 @@ struct input_keymap_entry { #define BTN_DPAD_LEFT 0x222 #define BTN_DPAD_RIGHT 0x223 +#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 -- cgit v0.10.2 From ae5fbae0ccd982dfca0ce363036ed92f5b13f150 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 22 Oct 2013 18:35:19 -0700 Subject: [SCSI] libsas: fix usage of ata_tf_to_fis Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by: Dan Williams Reported-by: Praveen Murali Tested-by: Praveen Murali Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 161c98e..d289583 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) qc->tf.nsect = 0; } - ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); task->uldd_task = qc; if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); -- cgit v0.10.2 From a415d355645ca5e8797235a76026ca2622ceefdb Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 26 Nov 2013 11:23:15 +0000 Subject: drm/i915: Pin relocations for the duration of constructing the execbuffer As the execbuffer dispatch grows ever more complex and involves multiple stages of moving objects into the aperture, we need to take greater care that we do not evict our execbuffer objects prior to dispatch. This is relatively simple as we can just keep the objects pinned for not just the relocation but until we are finished. One such example is the possibility of the context switch causing an eviction or hitting the shrinker in order to fit its object into the aperture. Link: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036166.html Reported-by: "Siluvery, Arun" Signed-off-by: Chris Wilson Cc: Ben Widawsky Cc: Daniel Vetter Cc: stable@vger.kernel.org Acked-by: Ben Widawsky Tested-by: Ben Widawsky [danvet: Add the additional explanations from Chris to the commit message.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 885d595..b7e787f 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -33,6 +33,9 @@ #include "intel_drv.h" #include +#define __EXEC_OBJECT_HAS_PIN (1<<31) +#define __EXEC_OBJECT_HAS_FENCE (1<<30) + struct eb_vmas { struct list_head vmas; int and; @@ -187,7 +190,28 @@ static struct i915_vma *eb_get_vma(struct eb_vmas *eb, unsigned long handle) } } -static void eb_destroy(struct eb_vmas *eb) { +static void +i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma) +{ + struct drm_i915_gem_exec_object2 *entry; + struct drm_i915_gem_object *obj = vma->obj; + + if (!drm_mm_node_allocated(&vma->node)) + return; + + entry = vma->exec_entry; + + if (entry->flags & __EXEC_OBJECT_HAS_FENCE) + i915_gem_object_unpin_fence(obj); + + if (entry->flags & __EXEC_OBJECT_HAS_PIN) + i915_gem_object_unpin(obj); + + entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN); +} + +static void eb_destroy(struct eb_vmas *eb) +{ while (!list_empty(&eb->vmas)) { struct i915_vma *vma; @@ -195,6 +219,7 @@ static void eb_destroy(struct eb_vmas *eb) { struct i915_vma, exec_list); list_del_init(&vma->exec_list); + i915_gem_execbuffer_unreserve_vma(vma); drm_gem_object_unreference(&vma->obj->base); } kfree(eb); @@ -478,9 +503,6 @@ i915_gem_execbuffer_relocate(struct eb_vmas *eb, return ret; } -#define __EXEC_OBJECT_HAS_PIN (1<<31) -#define __EXEC_OBJECT_HAS_FENCE (1<<30) - static int need_reloc_mappable(struct i915_vma *vma) { @@ -552,26 +574,6 @@ i915_gem_execbuffer_reserve_vma(struct i915_vma *vma, return 0; } -static void -i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma) -{ - struct drm_i915_gem_exec_object2 *entry; - struct drm_i915_gem_object *obj = vma->obj; - - if (!drm_mm_node_allocated(&vma->node)) - return; - - entry = vma->exec_entry; - - if (entry->flags & __EXEC_OBJECT_HAS_FENCE) - i915_gem_object_unpin_fence(obj); - - if (entry->flags & __EXEC_OBJECT_HAS_PIN) - i915_gem_object_unpin(obj); - - entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN); -} - static int i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, struct list_head *vmas, @@ -670,13 +672,14 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, goto err; } -err: /* Decrement pin count for bound objects */ - list_for_each_entry(vma, vmas, exec_list) - i915_gem_execbuffer_unreserve_vma(vma); - +err: if (ret != -ENOSPC || retry++) return ret; + /* Decrement pin count for bound objects */ + list_for_each_entry(vma, vmas, exec_list) + i915_gem_execbuffer_unreserve_vma(vma); + ret = i915_gem_evict_vm(vm, true); if (ret) return ret; @@ -708,6 +711,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, while (!list_empty(&eb->vmas)) { vma = list_first_entry(&eb->vmas, struct i915_vma, exec_list); list_del_init(&vma->exec_list); + i915_gem_execbuffer_unreserve_vma(vma); drm_gem_object_unreference(&vma->obj->base); } -- cgit v0.10.2 From 948df5e3890186152cd90129a69084886afca786 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Nov 2013 19:53:55 +0100 Subject: mfd: ti-ssp: Fix build drivers/mfd/ti-ssp.c: In function 'ti_ssp_run': drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'set_current_state' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:381: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/mfd/ti-ssp.c:286:381: note: each undeclared identifier is reported only once for each function it appears in drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'signal_pending' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function 'schedule' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:2: error: implicit declaration of function '__set_current_state' [-Werror=implicit-function-declaration] drivers/mfd/ti-ssp.c:286:742: error: 'TASK_RUNNING' undeclared (first use in this function) drivers/mfd/ti-ssp.c: In function 'ti_ssp_interrupt': drivers/mfd/ti-ssp.c:311:32: error: 'TASK_NORMAL' undeclared (first use in this function) Add missing #include . drivers/mfd/ti-ssp.c: In function 'ti_ssp_probe': drivers/mfd/ti-ssp.c:412:12: error: 'struct mfd_cell' has no member named 'data_size' data_size became unused in commit 40e03f571b2e63827f2afb90ea9aa459612c29e3 ("mfd: Drop data_size from mfd_cell struct"), hence remove its initialization. Signed-off-by: Geert Uytterhoeven Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c index 71e3e0c..a542457 100644 --- a/drivers/mfd/ti-ssp.c +++ b/drivers/mfd/ti-ssp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -409,7 +410,6 @@ static int ti_ssp_probe(struct platform_device *pdev) cells[id].id = id; cells[id].name = data->dev_name; cells[id].platform_data = data->pdata; - cells[id].data_size = data->pdata_size; } error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); -- cgit v0.10.2 From a8822df9043b6ff9751bca8acd8f0f64dd727706 Mon Sep 17 00:00:00 2001 From: James Ralston Date: Wed, 27 Nov 2013 09:38:04 +0100 Subject: mfd: lpc_ich: Fix Wildcat Point info name field Fix a copy paste error from the WPT support initial patch. Signed-off-by: James Ralston Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index da1c656..37edf9e 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -506,7 +506,7 @@ static struct lpc_ich_info lpc_chipset_info[] = { .iTCO_version = 2, }, [LPC_WPT_LP] = { - .name = "Lynx Point_LP", + .name = "Wildcat Point_LP", .iTCO_version = 2, }, }; -- cgit v0.10.2 From 46bec25da6a41b7308adde746cbcdbbd0bf9b39c Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 27 Nov 2013 18:05:09 +0800 Subject: ASoC: atmel: sam9x5_wm8731: fix oops when unload module As the priv is not assigned to card->drvdata, it is NULL, so when unload module, it will cause NULL pointer oops. Assign priv to card->drvdata to fix this issue. Signed-off-by: Bo Shen Signed-off-by: Mark Brown diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38..1b37228 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -97,6 +97,8 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) goto out; } + snd_soc_card_set_drvdata(card, priv); + card->dev = &pdev->dev; card->owner = THIS_MODULE; card->dai_link = dai; -- cgit v0.10.2 From df9e3560923a54a559211629895ed9fa1e48ccc0 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 27 Nov 2013 15:22:13 +0000 Subject: ASoC: wm5110: Remove output OSR and PGA volume controls These are managed automatically in current revisions. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c3c7396..99b359e 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -248,19 +248,6 @@ ARIZONA_MIXER_CONTROLS("SPKDAT1R", ARIZONA_OUT5RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SPKDAT2L", ARIZONA_OUT6LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SPKDAT2R", ARIZONA_OUT6RMIX_INPUT_1_SOURCE), -SOC_SINGLE("HPOUT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_1L, - ARIZONA_OUT1_OSR_SHIFT, 1, 0), -SOC_SINGLE("HPOUT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_2L, - ARIZONA_OUT2_OSR_SHIFT, 1, 0), -SOC_SINGLE("HPOUT3 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L, - ARIZONA_OUT3_OSR_SHIFT, 1, 0), -SOC_SINGLE("Speaker High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_4L, - ARIZONA_OUT4_OSR_SHIFT, 1, 0), -SOC_SINGLE("SPKDAT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_5L, - ARIZONA_OUT5_OSR_SHIFT, 1, 0), -SOC_SINGLE("SPKDAT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_6L, - ARIZONA_OUT6_OSR_SHIFT, 1, 0), - SOC_DOUBLE_R("HPOUT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_1L, ARIZONA_DAC_DIGITAL_VOLUME_1R, ARIZONA_OUT1L_MUTE_SHIFT, 1, 1), SOC_DOUBLE_R("HPOUT2 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_2L, @@ -293,18 +280,6 @@ SOC_DOUBLE_R_TLV("SPKDAT2 Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_6L, ARIZONA_DAC_DIGITAL_VOLUME_6R, ARIZONA_OUT6L_VOL_SHIFT, 0xbf, 0, digital_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT1 Volume", ARIZONA_OUTPUT_PATH_CONFIG_1L, - ARIZONA_OUTPUT_PATH_CONFIG_1R, - ARIZONA_OUT1L_PGA_VOL_SHIFT, - 0x34, 0x40, 0, ana_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT2 Volume", ARIZONA_OUTPUT_PATH_CONFIG_2L, - ARIZONA_OUTPUT_PATH_CONFIG_2R, - ARIZONA_OUT2L_PGA_VOL_SHIFT, - 0x34, 0x40, 0, ana_tlv), -SOC_DOUBLE_R_RANGE_TLV("HPOUT3 Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L, - ARIZONA_OUTPUT_PATH_CONFIG_3R, - ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv), - SOC_DOUBLE("SPKDAT1 Switch", ARIZONA_PDM_SPK1_CTRL_1, ARIZONA_SPK1L_MUTE_SHIFT, ARIZONA_SPK1R_MUTE_SHIFT, 1, 1), SOC_DOUBLE("SPKDAT2 Switch", ARIZONA_PDM_SPK2_CTRL_1, ARIZONA_SPK2L_MUTE_SHIFT, -- cgit v0.10.2 From 87b2841753e1694fc96fefb467f6aff9940b07af Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Nov 2013 16:13:10 +0000 Subject: regulator: core: Replace checks of have_full_constraints with a function Simple code reorganisation so we can change the logic for deciding what full constraints are more easily. Signed-off-by: Mark Brown diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6382f0a..1f31492 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -119,6 +119,11 @@ static const char *rdev_get_name(struct regulator_dev *rdev) return ""; } +static bool have_full_constraints(void) +{ + return has_full_constraints; +} + /** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device @@ -1340,7 +1345,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, * Assume that a regulator is physically present and enabled * even if it isn't hooked up and just provide a dummy. */ - if (has_full_constraints && allow_dummy) { + if (have_full_constraints() && allow_dummy) { pr_warn("%s supply %s not found, using dummy regulator\n", devname, id); @@ -3624,7 +3629,7 @@ int regulator_suspend_finish(void) if (error) ret = error; } else { - if (!has_full_constraints) + if (!have_full_constraints()) goto unlock; if (!ops->disable) goto unlock; @@ -3822,7 +3827,7 @@ static int __init regulator_init_complete(void) if (!enabled) goto unlock; - if (has_full_constraints) { + if (have_full_constraints()) { /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); -- cgit v0.10.2 From 17b6c19b34b43a6a8dd5936b3cdbc63d7d1ae186 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:17 +0100 Subject: ASoC: pcm: Fix rate_max calculation In order to make sure that the sample rate is in the supported range of both components the maximum rate of the card should be the minimum of the maximum rate of each components. There is one special case to consider though, if max_rate is set to 0 this means there is no maximum specified, so use min_not_zero() macro which will give use the desired result. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 42782c0..9441e17 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -153,7 +153,7 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, struct snd_soc_pcm_stream *cpu_stream) { hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, -- cgit v0.10.2 From 78e45c99f6d470e6069c8669ee533c97cc5fd296 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:18 +0100 Subject: ASoC: pcm: Always honor DAI min and max sample rate constraints snd_pcm_limit_hw_rates() will initialize the minimum and maximum sample rate for the PCM stream based on the rates specified in the rates field. Since we call snd_pcm_limit_hw_rates() after soc_pcm_init_runtime_hw() it will essentially overwrite the min and max rate set in soc_pcm_init_runtime_hw(). This may cause the minimum or maximum rate to be set to a value outside the range of one of the components if one of the components sets either SNDRV_PCM_RATE_CONTINUOUS or SNDRV_PCM_RATE_KNOT and the other component specified a discrete rate via SNDRV_PCM_RATE_[0-9]* that is outside of the first component's rate range. To fix this first calculate the minimum and maximum rates using snd_pcm_limit_hw_rates() and then on top of that apply the contraints specified in the snd_soc_pcm_stream structs. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 9441e17..11a90cd 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -148,12 +148,12 @@ static void soc_pcm_apply_msb(struct snd_pcm_substream *substream, } } -static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, +static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime, struct snd_soc_pcm_stream *codec_stream, struct snd_soc_pcm_stream *cpu_stream) { - hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); + struct snd_pcm_hardware *hw = &runtime->hw; + hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, @@ -166,6 +166,13 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, if (cpu_stream->rates & (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS)) hw->rates |= codec_stream->rates; + + snd_pcm_limit_hw_rates(runtime); + + hw->rate_min = max(hw->rate_min, cpu_stream->rate_min); + hw->rate_min = max(hw->rate_min, codec_stream->rate_min); + hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(hw->rate_max, codec_stream->rate_max); } /* @@ -235,15 +242,14 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) /* Check that the codec and cpu DAIs are compatible */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->playback, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->playback, &cpu_dai_drv->playback); } else { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->capture, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->capture, &cpu_dai_drv->capture); } ret = -EINVAL; - snd_pcm_limit_hw_rates(runtime); if (!runtime->hw.rates) { printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n", codec_dai->name, cpu_dai->name); -- cgit v0.10.2 From 1c195ddb1de14ff9a6327c47f88428200f7c8d88 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 26 Nov 2013 10:41:40 +0100 Subject: ASoC: kirkwood: Fix invalid S/PDIF format This patch removes the 32 bits format which is not supported by S/PDIF output. Signed-off-by: Jean-Francois Moine Signed-off-by: Mark Brown diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index d34d917..b42492d 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -33,6 +33,10 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define KIRKWOOD_SPDIF_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + static int kirkwood_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { @@ -449,14 +453,14 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai[2] = { .channels_max = 2, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .capture = { .channels_min = 1, .channels_max = 2, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .ops = &kirkwood_i2s_dai_ops, }, @@ -493,7 +497,7 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai_extclk[2] = { .rates = SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .capture = { .channels_min = 1, @@ -501,7 +505,7 @@ static struct snd_soc_dai_driver kirkwood_i2s_dai_extclk[2] = { .rates = SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, + .formats = KIRKWOOD_SPDIF_FORMATS, }, .ops = &kirkwood_i2s_dai_ops, }, -- cgit v0.10.2 From 75bc9641cadd2a3f91f9c2e7f2fdfdeb8bd4b1d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Nov 2013 16:22:53 +0000 Subject: regulator: core: Check for DT every time we check full constraints Eliminate the gap between DT becoming available and this being used to say we have full constraints by checking directly for DT every time we check for full constraints. This improves interoperaton with optional regulator support. Signed-off-by: Mark Brown Tested-by: Fabio Estevam diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1f31492..6a75794 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -121,7 +121,7 @@ static const char *rdev_get_name(struct regulator_dev *rdev) static bool have_full_constraints(void) { - return has_full_constraints; + return has_full_constraints || of_have_populated_dt(); } /** -- cgit v0.10.2 From 4f6f1478c1ada4524e9ed21190b4549233a816a3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 25 Nov 2013 20:19:05 +0100 Subject: ASoC: kirkwood: Fix erroneous double output while playing This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did always streaming on both I2S and SPDIF, ignoring the DAI ID. The bug was introduced by the commit 75b9b65ee5a "ASoC: kirkwood: add S/PDIF support" Signed-off-by: Jean-Francois Moine Signed-off-by: Mark Brown diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index b42492d..0b18f65 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -248,15 +248,15 @@ static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream, ctl); } - if (dai->id == 0) - ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */ - else - ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */ - switch (cmd) { case SNDRV_PCM_TRIGGER_START: /* configure */ ctl = priv->ctl_play; + if (dai->id == 0) + ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */ + else + ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */ + value = ctl & ~KIRKWOOD_PLAYCTL_ENABLE_MASK; writel(value, priv->io + KIRKWOOD_PLAYCTL); -- cgit v0.10.2 From bd6dc8f65481267383aa026b30f3379d224f4a7d Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Wed, 27 Nov 2013 08:58:38 -0800 Subject: misc: mic: Change mic_notify(...) to return true. virtqueue_{kick()/notify()} methods are required to return bool due to API changes introduced in commit 5b1bf7cb673a. Reported-by: Fengguang Wu Reported-by: Geert Uytterhoeven Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 8aa42e7..1ebc51c 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -187,11 +187,12 @@ static void mic_reset(struct virtio_device *vdev) /* * The virtio_ring code calls this API when it wants to notify the Host. */ -static void mic_notify(struct virtqueue *vq) +static bool mic_notify(struct virtqueue *vq) { struct mic_vdev *mvdev = vq->priv; mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); + return true; } static void mic_del_vq(struct virtqueue *vq, int n) -- cgit v0.10.2 From 9420b3485aa5748e171f2cedf35cc8f5a6a01c4b Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Wed, 27 Nov 2013 08:58:39 -0800 Subject: misc: mic: Minor bug fix in 'retry' loops. The bug would result in incorrect 'retry' value being printed in debug statements as well as dead code in mic_find_vqs(...) in drivers/misc/mic/card/mic_virtio.c. Reported-by: Michael Opdenacker Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 1ebc51c..4dce912 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -154,14 +154,14 @@ static void mic_reset_inform_host(struct virtio_device *vdev) { struct mic_vdev *mvdev = to_micvdev(vdev); struct mic_device_ctrl __iomem *dc = mvdev->dc; - int retry = 100, i; + int retry; iowrite8(0, &dc->host_ack); iowrite8(1, &dc->vdev_reset); mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); /* Wait till host completes all card accesses and acks the reset */ - for (i = retry; i--;) { + for (retry = 100; retry--;) { if (ioread8(&dc->host_ack)) break; msleep(100); @@ -310,7 +310,7 @@ static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs, { struct mic_vdev *mvdev = to_micvdev(vdev); struct mic_device_ctrl __iomem *dc = mvdev->dc; - int i, err, retry = 100; + int i, err, retry; /* We must have this many virtqueues. */ if (nvqs > ioread8(&mvdev->desc->num_vq)) @@ -332,7 +332,7 @@ static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs, * rings have been re-assigned. */ mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { if (!ioread8(&dc->used_address_updated)) break; msleep(100); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 5b8494b..945a3d0 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -378,7 +378,7 @@ int mic_virtio_config_change(struct mic_vdev *mvdev, void __user *argp) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int ret = 0, retry = 100, i; + int ret = 0, retry, i; struct mic_bootparam *bootparam = mvdev->mdev->dp; s8 db = bootparam->h2c_config_db; @@ -401,7 +401,7 @@ int mic_virtio_config_change(struct mic_vdev *mvdev, mvdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; mvdev->mdev->ops->send_intr(mvdev->mdev, db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { ret = wait_event_timeout(wake, mvdev->dc->guest_ack, msecs_to_jiffies(100)); if (ret) @@ -639,7 +639,7 @@ void mic_virtio_del_device(struct mic_vdev *mvdev) struct mic_vdev *tmp_mvdev; struct mic_device *mdev = mvdev->mdev; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int i, ret, retry = 100; + int i, ret, retry; struct mic_vqconfig *vqconfig; struct mic_bootparam *bootparam = mdev->dp; s8 db; @@ -652,16 +652,16 @@ void mic_virtio_del_device(struct mic_vdev *mvdev) "Requesting hot remove id %d\n", mvdev->virtio_id); mvdev->dc->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; mdev->ops->send_intr(mdev, db); - for (i = retry; i--;) { + for (retry = 100; retry--;) { ret = wait_event_timeout(wake, mvdev->dc->guest_ack, msecs_to_jiffies(100)); if (ret) break; } dev_dbg(mdev->sdev->parent, - "Device id %d config_change %d guest_ack %d\n", + "Device id %d config_change %d guest_ack %d retry %d\n", mvdev->virtio_id, mvdev->dc->config_change, - mvdev->dc->guest_ack); + mvdev->dc->guest_ack, retry); mvdev->dc->config_change = 0; mvdev->dc->guest_ack = 0; skip_hot_remove: -- cgit v0.10.2 From 286c24028c7f2df637323e672d9aa54a07b67bde Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:40 -0800 Subject: misc: mic: Bug fix for sysfs poll usage. MIC user space daemon poll's on sysfs changes. The documentation for sysfs_poll(...) in fs/sysfs/file.c states that "Once poll/select indicates that the value has changed, you need to close and re-open the file, or seek to 0 and read again". This step was missed out earlier and resulted in the daemon spinning continuously rather than getting blocked in 'poll'. This bug was exposed by commit aea585ef8fa65163 introduced as part of sysfs changes in 3.13-rc1. A seek to 0 has been introduced to fix it. Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 0c980ad..5c7fdda 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -1412,6 +1412,12 @@ mic_config(void *arg) } do { + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: Failed to seek to file start '%s': %s\n", + mic->name, pathname, strerror(errno)); + goto close_error1; + } ret = read(fd, value, sizeof(value)); if (ret < 0) { mpsslog("%s: Failed to read sysfs entry '%s': %s\n", -- cgit v0.10.2 From 1e31aa9270daab40c7aef9d5488982e3475b87ef Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:41 -0800 Subject: misc: mic: Fix user space namespace pollution from mic_common.h. Avoid declaring ALIGN() and __aligned() in include/uapi/linux/mic_common.h since they pollute user space namespace. Also, mic_aligned_size() can be simply replaced simply by sizeof() since all structures where mic_aligned_size() is used are declared using __attribute__ ((aligned(8))); -- >From mail from H Peter Anvin about this: On Fri, Nov 08, 2013 H Peter Anvin wrote: Subject: Namespace pollution in mic_common.h This puts two macros, ALIGN() and __aligned(), into arbitrary user space namespace. This really isn't safe or acceptable, especially since those symbols are highly generic. ... When these structures are forced-aligned, they will in fact have padding automatically added by the compiler to an 8-byte boundary anyway, so mic_aligned_size() does nothing. ... Reported-by: H Peter Anvin Reviewed-by: Sudeep Dutt Signed-off-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 5c7fdda..91f9e8e 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) int i; void *dp = get_dp(mic, type); - for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE; + for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; i += mic_total_desc_size(d)) { d = dp + i; @@ -520,7 +520,7 @@ static void * virtio_net(void *arg) { static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64); + static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); struct iovec vnet_iov[2][2] = { { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 4dce912..20c567b 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -520,8 +520,8 @@ static void mic_scan_devices(struct mic_driver *mdrv, bool remove) struct device *dev; int ret; - for (i = mic_aligned_size(struct mic_bootparam); - i < MIC_DP_SIZE; i += mic_total_desc_size(d)) { + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE; + i += mic_total_desc_size(d)) { d = mdrv->dp + i; dc = (void __iomem *)d + mic_aligned_desc_size(d); /* diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h index 2c5c22c..d0407ba 100644 --- a/drivers/misc/mic/card/mic_virtio.h +++ b/drivers/misc/mic/card/mic_virtio.h @@ -42,8 +42,8 @@ static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_size(*desc) - + ioread8(&desc->num_vq) * mic_aligned_size(struct mic_vqconfig) + return sizeof(*desc) + + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) + ioread8(&desc->feature_len) * 2 + ioread8(&desc->config_len); } @@ -67,8 +67,7 @@ mic_vq_configspace(struct mic_device_desc __iomem *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } int mic_devices_init(struct mic_driver *mdrv); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 945a3d0..efe8da4 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -467,7 +467,7 @@ static int mic_copy_dp_entry(struct mic_vdev *mvdev, } /* Find the first free device page entry */ - for (i = mic_aligned_size(struct mic_bootparam); + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE - mic_total_desc_size(dd_config); i += mic_total_desc_size(devp)) { devp = mdev->dp + i; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index 17e7d95..d0ec46d 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -23,12 +23,7 @@ #include -#ifndef __KERNEL__ -#define ALIGN(a, x) (((a) + (x) - 1) & ~((x) - 1)) -#define __aligned(x) __attribute__ ((aligned(x))) -#endif - -#define mic_aligned_size(x) ALIGN(sizeof(x), 8) +#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1)) /** * struct mic_device_desc: Virtio device information shared between the @@ -49,7 +44,7 @@ struct mic_device_desc { __u8 config_len; __u8 status; __u64 config[0]; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_ctrl: Per virtio device information in the device page @@ -74,7 +69,7 @@ struct mic_device_ctrl { __u8 used_address_updated; __s8 c2h_vdev_db; __s8 h2c_vdev_db; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_bootparam: Virtio device independent information in device page @@ -93,7 +88,7 @@ struct mic_bootparam { __s8 h2c_config_db; __u8 shutdown_status; __u8 shutdown_card; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_page: High level representation of the device page @@ -119,7 +114,7 @@ struct mic_vqconfig { __u64 address; __u64 used_address; __u16 num; -} __aligned(8); +} __attribute__ ((aligned(8))); /* * The alignment to use between consumer and producer parts of vring. @@ -173,15 +168,13 @@ struct mic_vring { int len; }; -#define mic_aligned_desc_size(d) ALIGN(mic_desc_size(d), 8) +#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8) #ifndef INTEL_MIC_CARD static inline unsigned mic_desc_size(const struct mic_device_desc *desc) { - return mic_aligned_size(*desc) - + desc->num_vq * mic_aligned_size(struct mic_vqconfig) - + desc->feature_len * 2 - + desc->config_len; + return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig) + + desc->feature_len * 2 + desc->config_len; } static inline struct mic_vqconfig * @@ -201,8 +194,7 @@ static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } #endif -- cgit v0.10.2 From 173c07278763850bfee57eec442dce38855d6f13 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:42 -0800 Subject: misc: mic: Fix endianness issues. Endianness issues are now consistent as per the documentation in host/mic_virtio.h. Sparse warnings related to endianness are also fixed. Note that the MIC driver implementation assumes that the host can be both BE or LE whereas the card is always LE. Reported-by: Fengguang Wu Reviewed-by: Sudeep Dutt Reviewed-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 91f9e8e..4d17487 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr0->va, vr0->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr0->info->magic, MIC_MAGIC + type); - assert(vr0->info->magic == MIC_MAGIC + type); + le32toh(vr0->info->magic), MIC_MAGIC + type); + assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; @@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr1->va, vr1->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr1->info->magic, MIC_MAGIC + type + 1); - assert(vr1->info->magic == MIC_MAGIC + type + 1); + le32toh(vr1->info->magic), MIC_MAGIC + type + 1); + assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); } done: return va; diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 20c567b..ca0445f 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -248,17 +248,16 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* First assign the vring's allocated in host memory */ vqconfig = mic_vq_config(mvdev->desc) + index; memcpy_fromio(&config, vqconfig, sizeof(config)); - _vr_size = vring_size(config.num, MIC_VIRTIO_RING_ALIGN); + _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN); vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); - va = mic_card_map(mvdev->mdev, config.address, vr_size); + va = mic_card_map(mvdev->mdev, le64_to_cpu(config.address), vr_size); if (!va) return ERR_PTR(-ENOMEM); mvdev->vr[index] = va; memset_io(va, 0x0, _vr_size); - vq = vring_new_virtqueue(index, - config.num, MIC_VIRTIO_RING_ALIGN, vdev, - false, - va, mic_notify, callback, name); + vq = vring_new_virtqueue(index, le16_to_cpu(config.num), + MIC_VIRTIO_RING_ALIGN, vdev, false, va, + mic_notify, callback, name); if (!vq) { err = -ENOMEM; goto unmap; @@ -273,7 +272,8 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* Allocate and reassign used ring now */ mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + - sizeof(struct vring_used_elem) * config.num); + sizeof(struct vring_used_elem) * + le16_to_cpu(config.num)); used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(mvdev->used_size[index])); if (!used) { diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c index 7558d91..b75c6b5 100644 --- a/drivers/misc/mic/host/mic_boot.c +++ b/drivers/misc/mic/host/mic_boot.c @@ -62,7 +62,7 @@ void mic_bootparam_init(struct mic_device *mdev) { struct mic_bootparam *bootparam = mdev->dp; - bootparam->magic = MIC_MAGIC; + bootparam->magic = cpu_to_le32(MIC_MAGIC); bootparam->c2h_shutdown_db = mdev->shutdown_db; bootparam->h2c_shutdown_db = -1; bootparam->h2c_config_db = -1; diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index efe8da4..453d740 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -293,8 +293,8 @@ static void mic_virtio_init_post(struct mic_vdev *mvdev) continue; } mvdev->mvr[i].vrh.vring.used = - mvdev->mdev->aper.va + - le64_to_cpu(vqconfig[i].used_address); + mvdev->mdev->aper.va + + le64_to_cpu(vqconfig[i].used_address); } mvdev->dc->used_address_updated = 0; @@ -525,6 +525,7 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, char irqname[10]; struct mic_bootparam *bootparam = mdev->dp; u16 num; + dma_addr_t vr_addr; mutex_lock(&mdev->mic_mutex); @@ -559,17 +560,16 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, } vr->len = vr_size; vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); - vr->info->magic = MIC_MAGIC + mvdev->virtio_id + i; - vqconfig[i].address = mic_map_single(mdev, - vr->va, vr_size); - if (mic_map_error(vqconfig[i].address)) { + vr->info->magic = cpu_to_le32(MIC_MAGIC + mvdev->virtio_id + i); + vr_addr = mic_map_single(mdev, vr->va, vr_size); + if (mic_map_error(vr_addr)) { free_pages((unsigned long)vr->va, get_order(vr_size)); ret = -ENOMEM; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, ret); goto err; } - vqconfig[i].address = cpu_to_le64(vqconfig[i].address); + vqconfig[i].address = cpu_to_le64(vr_addr); vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); ret = vringh_init_kern(&mvr->vrh, diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c index 81e9541..0dfa8a8 100644 --- a/drivers/misc/mic/host/mic_x100.c +++ b/drivers/misc/mic/host/mic_x100.c @@ -397,8 +397,8 @@ mic_x100_load_ramdisk(struct mic_device *mdev) * so copy over the ramdisk @ 128M. */ memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); - iowrite32(cpu_to_le32(mdev->bootaddr << 1), &bp->hdr.ramdisk_image); - iowrite32(cpu_to_le32(fw->size), &bp->hdr.ramdisk_size); + iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); + iowrite32(fw->size, &bp->hdr.ramdisk_size); release_firmware(fw); error: return rc; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index d0ec46d..6eb4024 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -43,7 +43,7 @@ struct mic_device_desc { __u8 feature_len; __u8 config_len; __u8 status; - __u64 config[0]; + __le64 config[0]; } __attribute__ ((aligned(8))); /** @@ -61,7 +61,7 @@ struct mic_device_desc { * @h2c_vdev_db: The doorbell number to be used by host. Set by guest. */ struct mic_device_ctrl { - __u64 vdev; + __le64 vdev; __u8 config_change; __u8 vdev_reset; __u8 guest_ack; @@ -82,7 +82,7 @@ struct mic_device_ctrl { * @shutdown_card: Set to 1 by the host when a card shutdown is initiated */ struct mic_bootparam { - __u32 magic; + __le32 magic; __s8 c2h_shutdown_db; __s8 h2c_shutdown_db; __s8 h2c_config_db; @@ -111,9 +111,9 @@ struct mic_device_page { * @num: The number of entries in the virtio_ring */ struct mic_vqconfig { - __u64 address; - __u64 used_address; - __u16 num; + __le64 address; + __le64 used_address; + __le16 num; } __attribute__ ((aligned(8))); /* @@ -149,7 +149,7 @@ struct mic_vqconfig { */ struct _mic_vring_info { __u16 avail_idx; - int magic; + __le32 magic; }; /** -- cgit v0.10.2 From 1a9286236916bb397c0fa7e9b3a354c291c85beb Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:43 -0800 Subject: misc: mic: Suppress memory space sparse warnings MIC card and host drivers are able to use virtio over the PCIe bus by treating ioremap return values for the prefetchable BARs as pointers, effectively treating I/O memory the same as system memory. However this results in sparse warnings. Knowing that these warnings do not point to a functional issue, this patch suppresses these warnings. Reported-by: Fengguang Wu Reviewed-by: Sudeep Dutt Signed-off-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index ca0445f..653799b 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -256,8 +256,9 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, mvdev->vr[index] = va; memset_io(va, 0x0, _vr_size); vq = vring_new_virtqueue(index, le16_to_cpu(config.num), - MIC_VIRTIO_RING_ALIGN, vdev, false, va, - mic_notify, callback, name); + MIC_VIRTIO_RING_ALIGN, vdev, false, + (void __force *)va, mic_notify, callback, + name); if (!vq) { err = -ENOMEM; goto unmap; @@ -540,7 +541,8 @@ static void mic_scan_devices(struct mic_driver *mdrv, bool remove) continue; /* device already exists */ - dev = device_find_child(mdrv->dev, d, mic_match_desc); + dev = device_find_child(mdrv->dev, (void __force *)d, + mic_match_desc); if (dev) { if (remove) iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE, diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 453d740..e04bb4f 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -41,7 +41,7 @@ static int mic_virtio_copy_to_user(struct mic_vdev *mvdev, * We are copying from IO below an should ideally use something * like copy_to_user_fromio(..) if it existed. */ - if (copy_to_user(ubuf, dbuf, len)) { + if (copy_to_user(ubuf, (void __force *)dbuf, len)) { err = -EFAULT; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); @@ -66,7 +66,7 @@ static int mic_virtio_copy_from_user(struct mic_vdev *mvdev, * We are copying to IO below and should ideally use something * like copy_from_user_toio(..) if it existed. */ - if (copy_from_user(dbuf, ubuf, len)) { + if (copy_from_user((void __force *)dbuf, ubuf, len)) { err = -EFAULT; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); @@ -293,8 +293,8 @@ static void mic_virtio_init_post(struct mic_vdev *mvdev) continue; } mvdev->mvr[i].vrh.vring.used = - mvdev->mdev->aper.va - + le64_to_cpu(vqconfig[i].used_address); + (void __force *)mvdev->mdev->aper.va + + le64_to_cpu(vqconfig[i].used_address); } mvdev->dc->used_address_updated = 0; -- cgit v0.10.2 From fec8cba306f974f3a4491176994de5d821273643 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 27 Nov 2013 11:10:26 -0800 Subject: drm/i915: use crtc_htotal in watermark calculations to match fastboot v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This value is more correct, and matches what we read out in the fastboot code. Without this, the watermark code will panic after the first mode setting activity after a fastboot. v2: fix up HSW ->clock usage too (Ville) Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index caf2ee4..6e0d5e0 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1180,7 +1180,7 @@ static bool g4x_compute_wm0(struct drm_device *dev, adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -1267,7 +1267,7 @@ static bool g4x_compute_srwm(struct drm_device *dev, crtc = intel_get_crtc_for_plane(dev, plane); adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -1498,7 +1498,7 @@ static void i965_update_wm(struct drm_crtc *unused_crtc) const struct drm_display_mode *adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; int clock = adjusted_mode->crtc_clock; - int htotal = adjusted_mode->htotal; + int htotal = adjusted_mode->crtc_htotal; int hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; int pixel_size = crtc->fb->bits_per_pixel / 8; unsigned long line_time_us; @@ -1624,7 +1624,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc) const struct drm_display_mode *adjusted_mode = &to_intel_crtc(enabled)->config.adjusted_mode; int clock = adjusted_mode->crtc_clock; - int htotal = adjusted_mode->htotal; + int htotal = adjusted_mode->crtc_htotal; int hdisplay = to_intel_crtc(enabled)->config.pipe_src_w; int pixel_size = enabled->fb->bits_per_pixel / 8; unsigned long line_time_us; @@ -1776,7 +1776,7 @@ static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane, crtc = intel_get_crtc_for_plane(dev, plane); adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode; clock = adjusted_mode->crtc_clock; - htotal = adjusted_mode->htotal; + htotal = adjusted_mode->crtc_htotal; hdisplay = to_intel_crtc(crtc)->config.pipe_src_w; pixel_size = crtc->fb->bits_per_pixel / 8; @@ -2469,8 +2469,9 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc) /* The WM are computed with base on how long it takes to fill a single * row at the given clock rate, multiplied by 8. * */ - linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8, mode->clock); - ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8, + linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, + mode->crtc_clock); + ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8, intel_ddi_get_cdclk_freq(dev_priv)); return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) | -- cgit v0.10.2 From 3441cded65118c217a749de4350b6cad50b0e350 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Wed, 27 Nov 2013 10:17:22 +0100 Subject: MAINTAINERS: add HSI subsystem This adds me as maintainer for the HSI subsystem and Carlos Chinea (original author) to the CREDITS file. Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman diff --git a/CREDITS b/CREDITS index 4fc997d..4c7738f 100644 --- a/CREDITS +++ b/CREDITS @@ -655,6 +655,11 @@ S: Stanford University S: Stanford, California 94305 S: USA +N: Carlos Chinea +E: carlos.chinea@nokia.com +E: cch.devel@gmail.com +D: Author of HSI Subsystem + N: Randolph Chung E: tausq@debian.org D: Linux/PA-RISC hacker diff --git a/MAINTAINERS b/MAINTAINERS index 8285ed4..a975b36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4038,6 +4038,14 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained F: fs/hpfs/ +HSI SUBSYSTEM +M: Sebastian Reichel +S: Maintained +F: Documentation/ABI/testing/sysfs-bus-hsi +F: drivers/hsi/ +F: include/linux/hsi/ +F: include/uapi/linux/hsi/ + HSO 3G MODEM DRIVER M: Jan Dumon W: http://www.pharscape.org -- cgit v0.10.2 From 415612c1caab50f60797f06ad016ef602f0503cb Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 31 Oct 2013 10:48:09 +0530 Subject: dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the recently introduced DMA_COMPLETE instead of DMA_SUCCESS. Without this patch we get the following build error: drivers/dma/s3c24xx-dma.c: In function ‘s3c24xx_dma_tx_status’: drivers/dma/s3c24xx-dma.c:798:13: error: ‘DMA_SUCCESS’ undeclared (first use in this function) Signed-off-by: Sachin Kamat Acked-by: Heiko Stuebner Acked-by: Kukjin Kim Signed-off-by: Vinod Koul diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index 4cb1279..085da4f 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -795,7 +795,7 @@ static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan, spin_lock_irqsave(&s3cchan->vc.lock, flags); ret = dma_cookie_status(chan, cookie, txstate); - if (ret == DMA_SUCCESS) { + if (ret == DMA_COMPLETE) { spin_unlock_irqrestore(&s3cchan->vc.lock, flags); return ret; } -- cgit v0.10.2 From 086b0af19ae43d1ac5d77b5d423aa58374ad2709 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 25 Nov 2013 15:15:14 +0800 Subject: dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe() Add missing platform_set_drvdata() in mmp_pdma_probe(), otherwise calling platform_get_drvdata() in mmp_pdma_remove() returns NULL. Signed-off-by: Wei Yongjun Signed-off-by: Vinod Koul diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index dcb1e05..8869500 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -1017,6 +1017,7 @@ static int mmp_pdma_probe(struct platform_device *op) } } + platform_set_drvdata(op, pdev); dev_info(pdev->device.dev, "initialized %d channels\n", dma_channels); return 0; } -- cgit v0.10.2 From f1eab074df85a05dabfd368b6f64e7de63070301 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:01 -0700 Subject: rcar-hpbdma: add max transfer size shdma_chan_probe() can set max transfer size, but it will be PAGE_SIZE with out this patch. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index ebad845..496180a 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -510,6 +510,8 @@ static int hpb_dmae_chan_probe(struct hpb_dmae_device *hpbdev, int id) } schan = &new_hpb_chan->shdma_chan; + schan->max_xfer_len = HPB_DMA_TCR_MAX; + shdma_chan_probe(sdev, schan, id); if (pdev->id >= 0) -- cgit v0.10.2 From b3000cd835a6116c0a7d0f8e3df5be26c2138d86 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:34 -0700 Subject: rcar-hpbdma: fixup channel busy check for double plane The device busy check method is different between single and double planes. It will always return "busy" without this patch if channel used as double plane. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 496180a..83de1db 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -60,6 +60,7 @@ #define HPB_DMAE_DSTPR_DMSTP BIT(0) /* DMA status register (DSTSR) bits */ +#define HPB_DMAE_DSTSR_DQSTS BIT(2) #define HPB_DMAE_DSTSR_DMSTS BIT(0) /* DMA common registers */ @@ -385,7 +386,10 @@ static bool hpb_dmae_channel_busy(struct shdma_chan *schan) struct hpb_dmae_chan *chan = to_chan(schan); u32 dstsr = ch_reg_read(chan, HPB_DMAE_DSTSR); - return (dstsr & HPB_DMAE_DSTSR_DMSTS) == HPB_DMAE_DSTSR_DMSTS; + if (chan->xfer_mode == XFER_DOUBLE) + return dstsr & HPB_DMAE_DSTSR_DQSTS; + else + return dstsr & HPB_DMAE_DSTSR_DMSTS; } static int -- cgit v0.10.2 From 5affdeea8fd07f89709d39585ec47fb29f73247c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 28 Oct 2013 23:52:21 -0700 Subject: rcar-hpbdma: initialise plane information when halted Plane information should be initialized when halted. It may restart from the wrong plane without this patch. Reviewed-by: Max Filippov Signed-off-by: Kuninori Morimoto Acked-by: Simon Horman Signed-off-by: Vinod Koul diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 83de1db..3083d90 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -287,6 +287,9 @@ static void hpb_dmae_halt(struct shdma_chan *schan) ch_reg_write(chan, HPB_DMAE_DCMDR_DQEND, HPB_DMAE_DCMDR); ch_reg_write(chan, HPB_DMAE_DSTPR_DMSTP, HPB_DMAE_DSTPR); + + chan->plane_idx = 0; + chan->first_desc = true; } static const struct hpb_dmae_slave_config * -- cgit v0.10.2 From da990a4f2d5a321911026c26c7eeec3bbc6fb7b7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 28 Nov 2013 15:49:59 +0530 Subject: ARC: [perf] Fix a few thinkos Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index e46d81f..63177e4 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config) cache_result = (config >> 16) & 0xff; if (cache_type >= PERF_COUNT_HW_CACHE_MAX) return -EINVAL; - if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX) + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) return -EINVAL; - if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX) + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; ret = arc_pmu_cache_map[cache_type][cache_op][cache_result]; -- cgit v0.10.2 From 5d8a77529bd6864361005117c3a611b6d810aa77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 1 Nov 2013 18:22:39 +0200 Subject: drm/i915: Check VBT for eDP ports on VLV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit VLV can have eDP on either port B or C, or even both. Based on the VBT spec, intel_dpd_is_edp() should work on VLV too, assuming we check the correct ports. So instead of hardcoding port D, rename the function to intel_dp_is_edp() and pass the port as a parameter, and use it on VLV ports B and C. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051 Tested-by: Robert Hooker Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes [danvet: Wrestle the patch to apply and compile properly.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 333fff3..526c8de 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -173,7 +173,7 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port) ddi_translations = ddi_translations_dp; break; case PORT_D: - if (intel_dpd_is_edp(dev)) + if (intel_dp_is_edp(dev, PORT_D)) ddi_translations = ddi_translations_edp; else ddi_translations = ddi_translations_dp; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7ec8b48..0d93695 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10049,7 +10049,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_ddi_init(dev, PORT_D); } else if (HAS_PCH_SPLIT(dev)) { int found; - dpd_is_edp = intel_dpd_is_edp(dev); + dpd_is_edp = intel_dp_is_edp(dev, PORT_D); if (has_edp_a(dev)) intel_dp_init(dev, DP_A, PORT_A); @@ -10086,8 +10086,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC, PORT_C); if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED) - intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, - PORT_C); + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); } intel_dsi_init(dev); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0b2e842..2e5154e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3326,11 +3326,16 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) } /* check the VBT to see whether the eDP is on DP-D port */ -bool intel_dpd_is_edp(struct drm_device *dev) +bool intel_dp_is_edp(struct drm_device *dev, enum port port) { struct drm_i915_private *dev_priv = dev->dev_private; union child_device_config *p_child; int i; + static const short port_mapping[] = { + [PORT_B] = PORT_IDPB, + [PORT_C] = PORT_IDPC, + [PORT_D] = PORT_IDPD, + }; if (!dev_priv->vbt.child_dev_num) return false; @@ -3338,7 +3343,7 @@ bool intel_dpd_is_edp(struct drm_device *dev) for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { p_child = dev_priv->vbt.child_dev + i; - if (p_child->common.dvo_port == PORT_IDPD && + if (p_child->common.dvo_port == port_mapping[port] && (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) == (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) return true; @@ -3625,12 +3630,13 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, case PORT_A: type = DRM_MODE_CONNECTOR_eDP; break; + case PORT_B: case PORT_C: - if (IS_VALLEYVIEW(dev)) + if (IS_VALLEYVIEW(dev) && intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; break; case PORT_D: - if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev)) + if (HAS_PCH_SPLIT(dev) && intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; break; default: /* silence GCC warning */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 1e49aa8..a18e88b 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -708,7 +708,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder); void intel_dp_check_link_status(struct intel_dp *intel_dp); bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config); -bool intel_dpd_is_edp(struct drm_device *dev); +bool intel_dp_is_edp(struct drm_device *dev, enum port port); void ironlake_edp_backlight_on(struct intel_dp *intel_dp); void ironlake_edp_backlight_off(struct intel_dp *intel_dp); void ironlake_edp_panel_on(struct intel_dp *intel_dp); -- cgit v0.10.2 From 3b32a35b31b19c8f9340d3b3a149062fce1cd89f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 1 Nov 2013 18:22:41 +0200 Subject: drm/i915: Simplify DP vs. eDP detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reduce the eDP detection to just checking if it's port A, or if the VBT tells us that the port is eDP for the other ports. Suggested-by: Jesse Barnes Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2e5154e..30c627c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3337,6 +3337,9 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port port) [PORT_D] = PORT_IDPD, }; + if (port == PORT_A) + return true; + if (!dev_priv->vbt.child_dev_num) return false; @@ -3621,27 +3624,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, intel_dp->DP = I915_READ(intel_dp->output_reg); intel_dp->attached_connector = intel_connector; - type = DRM_MODE_CONNECTOR_DisplayPort; - /* - * FIXME : We need to initialize built-in panels before external panels. - * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup - */ - switch (port) { - case PORT_A: + if (intel_dp_is_edp(dev, port)) type = DRM_MODE_CONNECTOR_eDP; - break; - case PORT_B: - case PORT_C: - if (IS_VALLEYVIEW(dev) && intel_dp_is_edp(dev, port)) - type = DRM_MODE_CONNECTOR_eDP; - break; - case PORT_D: - if (HAS_PCH_SPLIT(dev) && intel_dp_is_edp(dev, port)) - type = DRM_MODE_CONNECTOR_eDP; - break; - default: /* silence GCC warning */ - break; - } + else + type = DRM_MODE_CONNECTOR_DisplayPort; /* * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but -- cgit v0.10.2 From 22e580d07f6529a395c129575127ea6d860aed3a Mon Sep 17 00:00:00 2001 From: Bockholdt Arne Date: Tue, 26 Nov 2013 07:13:57 +0000 Subject: intel_idle: Fixed C6 state on Avoton/Rangeley processors Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors. Signed-off-by: Arne Bockholdt Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index cbd4e9a..92d1206 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -329,7 +329,7 @@ static struct cpuidle_state atom_cstates[] __initdata = { { .enter = NULL } }; -static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { +static struct cpuidle_state avn_cstates[] __initdata = { { .name = "C1-AVN", .desc = "MWAIT 0x00", @@ -340,7 +340,7 @@ static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { { .name = "C6-AVN", .desc = "MWAIT 0x51", - .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 15, .target_residency = 45, .enter = &intel_idle }, -- cgit v0.10.2 From 5a87182aa21d6d5d306840feab9321818dd3e2a3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 27 Nov 2013 09:09:42 +0530 Subject: cpufreq: suspend governors on system suspend/hibernate This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq() for handling suspend/resume of cpufreq governors. Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where tunables configuration for clusters/sockets with non-boot CPUs was getting lost after suspend/resume, as we were notifying governors with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that policy and so deallocating memory for tunables. This is fixed by this patch as we don't allow any operation on governors after device suspend and before device resume now. Reported-and-tested-by: Lan Tianyu Reported-by: Jinhyuk Choi Signed-off-by: Viresh Kumar [rjw: Changelog, minor cleanups] Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 9f098a8..10c3510 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "../base.h" #include "power.h" @@ -473,6 +474,7 @@ static void dpm_resume_noirq(pm_message_t state) dpm_show_time(starttime, state, "noirq"); resume_device_irqs(); cpuidle_resume(); + cpufreq_resume(); } /** @@ -885,6 +887,7 @@ static int dpm_suspend_noirq(pm_message_t state) ktime_t starttime = ktime_get(); int error = 0; + cpufreq_suspend(); cpuidle_pause(); suspend_device_irqs(); mutex_lock(&dpm_list_mtx); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 02d534d..606224a 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif +/* Flag to suspend/resume CPUFreq governors */ +static bool cpufreq_suspended; + static inline bool has_target(void) { return cpufreq_driver->target_index || cpufreq_driver->target; @@ -1462,6 +1466,41 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; +void cpufreq_suspend(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Suspending Governors\n", __func__); + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP)) + pr_err("%s: Failed to stop governor for policy: %p\n", + __func__, policy); + + cpufreq_suspended = true; +} + +void cpufreq_resume(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Resuming Governors\n", __func__); + + cpufreq_suspended = false; + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_START) + || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS)) + pr_err("%s: Failed to start governor for policy: %p\n", + __func__, policy); +} + /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1764,6 +1803,10 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, struct cpufreq_governor *gov = NULL; #endif + /* Don't start any governor operations if we are entering suspend */ + if (cpufreq_suspended) + return 0; + if (policy->governor->max_transition_latency && policy->cpuinfo.transition_latency > policy->governor->max_transition_latency) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 5bd6ab9..9171665 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -272,6 +272,14 @@ cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy) policy->cpuinfo.max_freq); } +#ifdef CONFIG_CPU_FREQ +void cpufreq_suspend(void); +void cpufreq_resume(void); +#else +static inline void cpufreq_suspend(void) {} +static inline void cpufreq_resume(void) {} +#endif + /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ -- cgit v0.10.2 From 43dd5554fc4e0aa3c29df24aa9dbc7a610fb9e36 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 12 Nov 2013 23:16:50 -0800 Subject: gpu: host1x: Silence a few warnings with LPAE=y When building with LPAE=y (64-bit dma_addr_t), the following warnings are seen: drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' drivers/gpu/host1x/hw/debug_hw.c:167:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' The agreed-to solution for this is upcast to u64 and using %llx. Signed-off-by: Olof Johansson Signed-off-by: Thierry Reding diff --git a/drivers/gpu/host1x/hw/cdma_hw.c b/drivers/gpu/host1x/hw/cdma_hw.c index 37e2a63..6b09b71 100644 --- a/drivers/gpu/host1x/hw/cdma_hw.c +++ b/drivers/gpu/host1x/hw/cdma_hw.c @@ -54,8 +54,8 @@ static void cdma_timeout_cpu_incr(struct host1x_cdma *cdma, u32 getptr, u32 *p = (u32 *)((u32)pb->mapped + getptr); *(p++) = HOST1X_OPCODE_NOP; *(p++) = HOST1X_OPCODE_NOP; - dev_dbg(host1x->dev, "%s: NOP at 0x%x\n", __func__, - pb->phys + getptr); + dev_dbg(host1x->dev, "%s: NOP at %#llx\n", __func__, + (u64)pb->phys + getptr); getptr = (getptr + 8) & (pb->size_bytes - 1); } wmb(); diff --git a/drivers/gpu/host1x/hw/debug_hw.c b/drivers/gpu/host1x/hw/debug_hw.c index 640c75c..f72c873 100644 --- a/drivers/gpu/host1x/hw/debug_hw.c +++ b/drivers/gpu/host1x/hw/debug_hw.c @@ -163,8 +163,8 @@ static void show_channel_gathers(struct output *o, struct host1x_cdma *cdma) continue; } - host1x_debug_output(o, " GATHER at %08x+%04x, %d words\n", - g->base, g->offset, g->words); + host1x_debug_output(o, " GATHER at %#llx+%04x, %d words\n", + (u64)g->base, g->offset, g->words); show_gather(o, g->base + g->offset, g->words, cdma, g->base, mapped); -- cgit v0.10.2 From fc019c7122dfcd69c50142b57a735539aec5da95 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:04 -0600 Subject: crypto: authenc - Find proper IV address in ablkcipher callback When performing an asynchronous ablkcipher operation the authenc completion callback routine is invoked, but it does not locate and use the proper IV. The callback routine, crypto_authenc_encrypt_done, is updated to use the same method of calculating the address of the IV as is done in crypto_authenc_encrypt function which sets up the callback. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu diff --git a/crypto/authenc.c b/crypto/authenc.c index 1875e70..e122355 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -380,9 +380,10 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req, if (!err) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); - struct ablkcipher_request *abreq = aead_request_ctx(areq); - u8 *iv = (u8 *)(abreq + 1) + - crypto_ablkcipher_reqsize(ctx->enc); + struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq); + struct ablkcipher_request *abreq = (void *)(areq_ctx->tail + + ctx->reqoff); + u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc); err = crypto_authenc_genicv(areq, iv, 0); } -- cgit v0.10.2 From 41da8b5adba77e22584f8b45f9641504fa885308 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:10 -0600 Subject: crypto: scatterwalk - Set the chain pointer indication bit The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain function to chain two scatterlists, but the chain pointer indication bit is not set. When the resulting scatterlist is used, for example, by sg_nents to count the number of scatterlist entries, a segfault occurs because sg_nents does not follow the chain pointer to the chained scatterlist. Update scatterwalk_sg_chain to set the chain pointer indication bit as is done by the sg_chain function. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 13621cc..64ebede 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -36,6 +36,7 @@ static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num, { sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0); sg1[num - 1].page_link &= ~0x02; + sg1[num - 1].page_link |= 0x01; } static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) -- cgit v0.10.2 From 935e99a3afda0a58c2eada0ff7c613d3844d738c Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Tue, 19 Nov 2013 14:57:49 +0200 Subject: crypto: talitos - corrrectly handle zero-length assoc data talitos does not handle well zero-length assoc data. From dmesg: talitos ffe30000.crypto: master data transfer error talitos ffe30000.crypto: gather return/length error Check whether assoc data is provided by inspecting assoclen, not assoc pointer. This is needed in order to pass testmgr tests. Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 905de44..81ab42c 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -790,7 +790,7 @@ static void ipsec_esp_unmap(struct device *dev, if (edesc->assoc_chained) talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE); - else + else if (areq->assoclen) /* assoc_nents counts also for IV in non-contiguous cases */ dma_unmap_sg(dev, areq->assoc, edesc->assoc_nents ? edesc->assoc_nents - 1 : 1, @@ -973,7 +973,11 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, dma_sync_single_for_device(dev, edesc->dma_link_tbl, edesc->dma_len, DMA_BIDIRECTIONAL); } else { - to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc)); + if (areq->assoclen) + to_talitos_ptr(&desc->ptr[1], + sg_dma_address(areq->assoc)); + else + to_talitos_ptr(&desc->ptr[1], edesc->iv_dma); desc->ptr[1].j_extent = 0; } @@ -1122,10 +1126,10 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, return ERR_PTR(-EINVAL); } - if (iv) + if (ivsize) iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE); - if (assoc) { + if (assoclen) { /* * Currently it is assumed that iv is provided whenever assoc * is. @@ -1173,9 +1177,16 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, edesc = kmalloc(alloc_len, GFP_DMA | flags); if (!edesc) { - talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + if (assoc_chained) + talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + else if (assoclen) + dma_unmap_sg(dev, assoc, + assoc_nents ? assoc_nents - 1 : 1, + DMA_TO_DEVICE); + if (iv_dma) dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE); + dev_err(dev, "could not allocate edescriptor\n"); return ERR_PTR(-ENOMEM); } -- cgit v0.10.2 From 9dda2769af4f3f3093434648c409bb351120d9e8 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Tue, 19 Nov 2013 17:12:47 +0100 Subject: crypto: s390 - Fix aes-xts parameter corruption Some s390 crypto algorithms incorrectly use the crypto_tfm structure to store private data. As the tfm can be shared among multiple threads, this can result in data corruption. This patch fixes aes-xts by moving the xts and pcc parameter blocks from the tfm onto the stack (48 + 96 bytes). Cc: stable@vger.kernel.org Signed-off-by: Gerald Schaefer Signed-off-by: Herbert Xu diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 4363528..b3feabd 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -55,8 +55,7 @@ struct pcc_param { struct s390_xts_ctx { u8 key[32]; - u8 xts_param[16]; - struct pcc_param pcc; + u8 pcc_key[32]; long enc; long dec; int key_len; @@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_128_ENCRYPT; xts_ctx->dec = KM_XTS_128_DECRYPT; memcpy(xts_ctx->key + 16, in_key, 16); - memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16); + memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16); break; case 48: xts_ctx->enc = 0; @@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_256_ENCRYPT; xts_ctx->dec = KM_XTS_256_DECRYPT; memcpy(xts_ctx->key, in_key, 32); - memcpy(xts_ctx->pcc.key, in_key + 32, 32); + memcpy(xts_ctx->pcc_key, in_key + 32, 32); break; default: *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; @@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func, unsigned int nbytes = walk->nbytes; unsigned int n; u8 *in, *out; - void *param; + struct pcc_param pcc_param; + struct { + u8 key[32]; + u8 init[16]; + } xts_param; if (!nbytes) goto out; - memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block)); - memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit)); - memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts)); - memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak)); - param = xts_ctx->pcc.key + offset; - ret = crypt_s390_pcc(func, param); + memset(pcc_param.block, 0, sizeof(pcc_param.block)); + memset(pcc_param.bit, 0, sizeof(pcc_param.bit)); + memset(pcc_param.xts, 0, sizeof(pcc_param.xts)); + memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak)); + memcpy(pcc_param.key, xts_ctx->pcc_key, 32); + ret = crypt_s390_pcc(func, &pcc_param.key[offset]); if (ret < 0) return -EIO; - memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16); - param = xts_ctx->key + offset; + memcpy(xts_param.key, xts_ctx->key, 32); + memcpy(xts_param.init, pcc_param.xts, 16); do { /* only use complete blocks */ n = nbytes & ~(AES_BLOCK_SIZE - 1); out = walk->dst.virt.addr; in = walk->src.virt.addr; - ret = crypt_s390_km(func, param, out, in, n); + ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n); if (ret < 0 || ret != n) return -EIO; -- cgit v0.10.2 From 5638cabf3e4883f38dfb246c30980cebf694fbda Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:15 +0200 Subject: crypto: ccm - Fix handling of zero plaintext when computing mac There are cases when cryptlen can be zero in crypto_ccm_auth(): -encryptiom: input scatterlist length is zero (no plaintext) -decryption: input scatterlist contains only the mac plus the condition of having different source and destination buffers (or else scatterlist length = max(plaintext_len, ciphertext_len)). These are not handled correctly, leading to crashes like: root@p4080ds:~/crypto# insmod tcrypt.ko mode=45 ------------[ cut here ]------------ kernel BUG at crypto/scatterwalk.c:37! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14 task: ee12c5b0 ti: eecd0000 task.ti: eecd0000 NIP: c0204d98 LR: f9225848 CTR: c0204d80 REGS: eecd1b70 TRAP: 0700 Not tainted (3.11.0) MSR: 00029002 CR: 22044022 XER: 20000000 GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464 GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20 GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000 GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460 NIP [c0204d98] scatterwalk_start+0x18/0x30 LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm] Call Trace: [eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable) [eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm] [eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm] [eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20 [eecd1e20] [c020f35c] test_aead+0x6c/0xe0 [eecd1e40] [c020f420] alg_test_aead+0x50/0xd0 [eecd1e60] [c020e5e4] alg_test+0x114/0x2e0 [eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eecd1ef0] [c0047058] kthread+0xa8/0xb0 [eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000 39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020 ---[ end trace 6d652dfcd1be37bd ]--- Cc: Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/crypto/ccm.c b/crypto/ccm.c index 3e05499..1df8421 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain, } /* compute plaintext into mac */ - get_data_to_compute(cipher, pctx, plain, cryptlen); + if (cryptlen) + get_data_to_compute(cipher, pctx, plain, cryptlen); out: return err; -- cgit v0.10.2 From bbf9c8934ba2bfd5fd809562f945deaf5a565898 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:16 +0200 Subject: crypto: caam - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf91f7634 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: caamalg(+) caam_jr caam CPU: 1 PID: 1053 Comm: cryptomgr_test Not tainted 3.11.0 #16 task: eeb24ab0 ti: eeafa000 task.ti: eeafa000 NIP: f91f7634 LR: f91f7f24 CTR: f91f7ef0 REGS: eeafbbc0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029002 CR: 44044044 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f91f7f24 eeafbc70 eeb24ab0 00000002 ee8e0900 ee8e0800 00000024 c45c4462 GPR08: 00000010 00000000 00000014 0c0e4000 24044044 00000000 00000000 c0691590 GPR16: eeab0000 eeb23000 00000000 00000000 00000000 00000001 00000001 eeafbcc8 GPR24: 000000d1 00000010 ee2d5000 ee49ea10 ee49ea10 ee46f640 ee46f640 c0691590 NIP [f91f7634] aead_edesc_alloc.constprop.14+0x144/0x780 [caamalg] LR [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] Call Trace: [eeafbc70] [a1004000] 0xa1004000 (unreliable) [eeafbcc0] [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] [eeafbcf0] [c020d77c] __test_aead+0x3ec/0xe20 [eeafbe20] [c020f35c] test_aead+0x6c/0xe0 [eeafbe40] [c020f420] alg_test_aead+0x50/0xd0 [eeafbe60] [c020e5e4] alg_test+0x114/0x2e0 [eeafbee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eeafbef0] [c0047058] kthread+0xa8/0xb0 [eeafbf40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 69084321 7d080034 5508d97e 69080001 0f080000 81290024 552807fe 0f080000 3a600001 5529003a 2f8a0000 40dd0028 <80e90004> 3ab50001 8109000c 70e30002 ---[ end trace b3c3e23925c7484e ]--- While here, add a tcrypt mode for making it easy to test authenc (needed for triggering case above). Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 1ab8258..001f07c 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1242,6 +1242,10 @@ static int do_test(int m) ret += tcrypt_test("cmac(des3_ede)"); break; + case 155: + ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))"); + break; + case 200: test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0, speed_template_16_24_32); diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 4f44b71..4cf5dec 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -818,7 +818,7 @@ static void aead_decrypt_done(struct device *jrdev, u32 *desc, u32 err, ivsize, 1); print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ", DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst), - req->cryptlen, 1); + req->cryptlen - ctx->authsize, 1); #endif if (err) { @@ -972,12 +972,9 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, (edesc->src_nents ? : 1); in_options = LDST_SGF; } - if (encrypt) - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); - else - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen, in_options); + + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (likely(req->src == req->dst)) { if (all_contig) { @@ -998,7 +995,8 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, } } if (encrypt) - append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize, + out_options); else append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize, out_options); @@ -1048,8 +1046,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents; in_options = LDST_SGF; } - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (contig & GIV_DST_CONTIG) { dst_dma = edesc->iv_dma; @@ -1066,7 +1064,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, } } - append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize, + out_options); } /* @@ -1130,7 +1129,8 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr, * allocate and map the aead extended descriptor */ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, - int desc_bytes, bool *all_contig_ptr) + int desc_bytes, bool *all_contig_ptr, + bool encrypt) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct caam_ctx *ctx = crypto_aead_ctx(aead); @@ -1145,12 +1145,22 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, bool assoc_chained = false, src_chained = false, dst_chained = false; int ivsize = crypto_aead_ivsize(aead); int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes; + unsigned int authsize = ctx->authsize; assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained); - src_nents = sg_count(req->src, req->cryptlen, &src_chained); - if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + if (unlikely(req->dst != req->src)) { + src_nents = sg_count(req->src, req->cryptlen, &src_chained); + dst_nents = sg_count(req->dst, + req->cryptlen + + (encrypt ? authsize : (-authsize)), + &dst_chained); + } else { + src_nents = sg_count(req->src, + req->cryptlen + + (encrypt ? authsize : 0), + &src_chained); + } sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1234,11 +1244,9 @@ static int aead_encrypt(struct aead_request *req) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1275,7 +1283,7 @@ static int aead_decrypt(struct aead_request *req) /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1332,7 +1340,8 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request src_nents = sg_count(req->src, req->cryptlen, &src_chained); if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize, + &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1426,8 +1435,6 @@ static int aead_givencrypt(struct aead_givcrypt_request *areq) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN * CAAM_CMD_SZ, &contig); -- cgit v0.10.2 From 62293a37de0138b2e9c965f0a3b803c0f40a6581 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:17 +0200 Subject: crypto: talitos - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf2265a28 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P2020 RDB Modules linked in: talitos(+) CPU: 1 PID: 2187 Comm: cryptomgr_test Not tainted 3.11.0 #12 task: c4e72e20 ti: ef634000 task.ti: ef634000 NIP: f2265a28 LR: f2266ad8 CTR: c000c900 REGS: ef635bb0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029000 CR: 42042084 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f2266e10 ef635c60 c4e72e20 00000001 00000014 ef635c69 00000001 c11f3082 GPR08: 00000010 00000000 00000002 2f635d58 22044084 00000000 00000000 c0755c80 GPR16: c4bf1000 ef784000 00000000 00000000 00000020 00000014 00000010 ef2f6100 GPR24: ef2f6200 00000024 ef143210 ef2f6000 00000000 ef635d58 00000000 2f635d58 NIP [f2265a28] sg_count+0x1c/0xb4 [talitos] LR [f2266ad8] talitos_edesc_alloc+0x12c/0x410 [talitos] Call Trace: [ef635c60] [c0552068] schedule_timeout+0x148/0x1ac (unreliable) [ef635cc0] [f2266e10] aead_edesc_alloc+0x54/0x64 [talitos] [ef635ce0] [f22680f0] aead_encrypt+0x24/0x70 [talitos] [ef635cf0] [c024b948] __test_aead+0x494/0xf68 [ef635e20] [c024d54c] test_aead+0x64/0xcc [ef635e40] [c024d604] alg_test_aead+0x50/0xc4 [ef635e60] [c024c838] alg_test+0x10c/0x2e4 [ef635ee0] [c0249d1c] cryptomgr_test+0x4c/0x54 [ef635ef0] [c005d598] kthread+0xa8/0xac [ef635f40] [c000e3bc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 81230024 552807fe 0f080000 5523003a 4bffff24 39000000 2c040000 99050000 408100a0 7c691b78 38c00001 38600000 <80e90004> 38630001 8109000c 70ea0002 ---[ end trace 4498123cd8478591 ]--- Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 81ab42c..b44f4dd 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1112,7 +1112,8 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, unsigned int authsize, unsigned int ivsize, int icv_stashing, - u32 cryptoflags) + u32 cryptoflags, + bool encrypt) { struct talitos_edesc *edesc; int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len; @@ -1145,19 +1146,17 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, assoc_nents = assoc_nents ? assoc_nents + 1 : 2; } - src_nents = sg_count(src, cryptlen + authsize, &src_chained); - src_nents = (src_nents == 1) ? 0 : src_nents; - - if (!dst) { - dst_nents = 0; - } else { - if (dst == src) { - dst_nents = src_nents; - } else { - dst_nents = sg_count(dst, cryptlen + authsize, - &dst_chained); - dst_nents = (dst_nents == 1) ? 0 : dst_nents; - } + if (!dst || dst == src) { + src_nents = sg_count(src, cryptlen + authsize, &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = dst ? src_nents : 0; + } else { /* dst && dst != src*/ + src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize), + &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0), + &dst_chained); + dst_nents = (dst_nents == 1) ? 0 : dst_nents; } /* @@ -1208,7 +1207,7 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, } static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, - int icv_stashing) + int icv_stashing, bool encrypt) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct talitos_ctx *ctx = crypto_aead_ctx(authenc); @@ -1217,7 +1216,7 @@ static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst, iv, areq->assoclen, areq->cryptlen, ctx->authsize, ivsize, icv_stashing, - areq->base.flags); + areq->base.flags, encrypt); } static int aead_encrypt(struct aead_request *req) @@ -1227,7 +1226,7 @@ static int aead_encrypt(struct aead_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 0); + edesc = aead_edesc_alloc(req, req->iv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1250,7 +1249,7 @@ static int aead_decrypt(struct aead_request *req) req->cryptlen -= authsize; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 1); + edesc = aead_edesc_alloc(req, req->iv, 1, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1296,7 +1295,7 @@ static int aead_givencrypt(struct aead_givcrypt_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(areq, req->giv, 0); + edesc = aead_edesc_alloc(areq, req->giv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1452,7 +1451,7 @@ static int common_nonsnoop(struct talitos_edesc *edesc, } static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * - areq) + areq, bool encrypt) { struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher); @@ -1460,7 +1459,7 @@ static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst, areq->info, 0, areq->nbytes, 0, ivsize, 0, - areq->base.flags); + areq->base.flags, encrypt); } static int ablkcipher_encrypt(struct ablkcipher_request *areq) @@ -1470,7 +1469,7 @@ static int ablkcipher_encrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1487,7 +1486,7 @@ static int ablkcipher_decrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1639,7 +1638,7 @@ static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq, struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq); return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0, - nbytes, 0, 0, 0, areq->base.flags); + nbytes, 0, 0, 0, areq->base.flags, false); } static int ahash_init(struct ahash_request *areq) -- cgit v0.10.2 From 8ec25c51291681bd68bdc290b35f2e61fa601c21 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:18 +0200 Subject: crypto: testmgr - fix sglen in test_aead for case 'dst != src' Commit d8a32ac25698cd60b02bed2100379803c7f964e3 (crypto: testmgr - make test_aead also test 'dst != src' code paths) added support for different source and destination buffers in test_aead. This patch modifies the source and destination buffer lengths accordingly: the lengths are not equal since encryption / decryption adds / removes the ICV. Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu diff --git a/crypto/testmgr.c b/crypto/testmgr.c index 432afc0..7795550 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -503,16 +503,16 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg_init_one(&sg[0], input, - template[i].ilen + (enc ? authsize : 0)); - if (diff_dst) { output = xoutbuf[0]; output += align_offset; + sg_init_one(&sg[0], input, template[i].ilen); sg_init_one(&sgout[0], output, + template[i].rlen); + } else { + sg_init_one(&sg[0], input, template[i].ilen + (enc ? authsize : 0)); - } else { output = input; } @@ -612,12 +612,6 @@ static int __test_aead(struct crypto_aead *tfm, int enc, memcpy(q, template[i].input + temp, template[i].tap[k]); - n = template[i].tap[k]; - if (k == template[i].np - 1 && enc) - n += authsize; - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; - sg_set_buf(&sg[k], q, template[i].tap[k]); if (diff_dst) { @@ -625,13 +619,17 @@ static int __test_aead(struct crypto_aead *tfm, int enc, offset_in_page(IDX[k]); memset(q, 0, template[i].tap[k]); - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; sg_set_buf(&sgout[k], q, template[i].tap[k]); } + n = template[i].tap[k]; + if (k == template[i].np - 1 && enc) + n += authsize; + if (offset_in_page(q) + n < PAGE_SIZE) + q[n] = 0; + temp += template[i].tap[k]; } @@ -650,10 +648,10 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg[k - 1].length += authsize; - if (diff_dst) sgout[k - 1].length += authsize; + else + sg[k - 1].length += authsize; } sg_init_table(asg, template[i].anp); -- cgit v0.10.2 From e0d59733f6b1796b8d6692642c87d7dd862c3e3a Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Wed, 30 Oct 2013 15:27:26 -0400 Subject: efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed Currently, when mounting pstore file system, a read callback of efi_pstore driver runs mutiple times as below. - In the first read callback, scan efivar_sysfs_list from head and pass a kmsg buffer of a entry to an upper pstore layer. - In the second read callback, rescan efivar_sysfs_list from the entry and pass another kmsg buffer to it. - Repeat the scan and pass until the end of efivar_sysfs_list. In this process, an entry is read across the multiple read function calls. To avoid race between the read and erasion, the whole process above is protected by a spinlock, holding in open() and releasing in close(). At the same time, kmemdup() is called to pass the buffer to pstore filesystem during it. And then, it causes a following lockdep warning. To make the dynamic memory allocation runnable without taking spinlock, holding off a deletion of sysfs entry if it happens while scanning it via efi_pstore, and deleting it after the scan is completed. To implement it, this patch introduces two flags, scanning and deleting, to efivar_entry. On the code basis, it seems that all the scanning and deleting logic is not needed because __efivars->lock are not dropped when reading from the EFI variable store. But, the scanning and deleting logic is still needed because an efi-pstore and a pstore filesystem works as follows. In case an entry(A) is found, the pointer is saved to psi->data. And efi_pstore_read() passes the entry(A) to a pstore filesystem by releasing __efivars->lock. And then, the pstore filesystem calls efi_pstore_read() again and the same entry(A), which is saved to psi->data, is used for resuming to scan a sysfs-list. So, to protect the entry(A), the logic is needed. [ 1.143710] ------------[ cut here ]------------ [ 1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110() [ 1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 1.144058] Modules linked in: [ 1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2 [ 1.144058] 0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28 [ 1.144058] ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046 [ 1.144058] 00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78 [ 1.144058] Call Trace: [ 1.144058] [] dump_stack+0x54/0x74 [ 1.144058] [] warn_slowpath_common+0x7d/0xa0 [ 1.144058] [] warn_slowpath_fmt+0x4c/0x50 [ 1.144058] [] ? vsscanf+0x57f/0x7b0 [ 1.144058] [] lockdep_trace_alloc+0x104/0x110 [ 1.144058] [] __kmalloc_track_caller+0x50/0x280 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] kmemdup+0x20/0x50 [ 1.144058] [] efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x170/0x170 [ 1.144058] [] efi_pstore_read_func+0xb4/0xe0 [ 1.144058] [] __efivar_entry_iter+0xfb/0x120 [ 1.144058] [] efi_pstore_read+0x3f/0x50 [ 1.144058] [] pstore_get_records+0x9a/0x150 [ 1.158207] [] ? selinux_d_instantiate+0x1c/0x20 [ 1.158207] [] ? parse_options+0x80/0x80 [ 1.158207] [] pstore_fill_super+0xa5/0xc0 [ 1.158207] [] mount_single+0xa2/0xd0 [ 1.158207] [] pstore_mount+0x18/0x20 [ 1.158207] [] mount_fs+0x39/0x1b0 [ 1.158207] [] ? __alloc_percpu+0x10/0x20 [ 1.158207] [] vfs_kern_mount+0x63/0xf0 [ 1.158207] [] do_mount+0x23e/0xa20 [ 1.158207] [] ? strndup_user+0x4b/0xf0 [ 1.158207] [] SyS_mount+0x83/0xc0 [ 1.158207] [] system_call_fastpath+0x16/0x1b [ 1.158207] ---[ end trace 61981bc62de9f6f4 ]--- Signed-off-by: Seiji Aguchi Tested-by: Madper Xie Cc: stable@kernel.org Signed-off-by: Matt Fleming diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 5002d50..6ce31e9 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -18,14 +18,12 @@ module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644); static int efi_pstore_open(struct pstore_info *psi) { - efivar_entry_iter_begin(); psi->data = NULL; return 0; } static int efi_pstore_close(struct pstore_info *psi) { - efivar_entry_iter_end(); psi->data = NULL; return 0; } @@ -91,19 +89,125 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) __efivar_entry_get(entry, &entry->var.Attributes, &entry->var.DataSize, entry->var.Data); size = entry->var.DataSize; + memcpy(*cb_data->buf, entry->var.Data, + (size_t)min_t(unsigned long, EFIVARS_DATA_SIZE_MAX, size)); - *cb_data->buf = kmemdup(entry->var.Data, size, GFP_KERNEL); - if (*cb_data->buf == NULL) - return -ENOMEM; return size; } +/** + * efi_pstore_scan_sysfs_enter + * @entry: scanning entry + * @next: next entry + * @head: list head + */ +static void efi_pstore_scan_sysfs_enter(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head) +{ + pos->scanning = true; + if (&next->list != head) + next->scanning = true; +} + +/** + * __efi_pstore_scan_sysfs_exit + * @entry: deleting entry + * @turn_off_scanning: Check if a scanning flag should be turned off + */ +static inline void __efi_pstore_scan_sysfs_exit(struct efivar_entry *entry, + bool turn_off_scanning) +{ + if (entry->deleting) { + list_del(&entry->list); + efivar_entry_iter_end(); + efivar_unregister(entry); + efivar_entry_iter_begin(); + } else if (turn_off_scanning) + entry->scanning = false; +} + +/** + * efi_pstore_scan_sysfs_exit + * @pos: scanning entry + * @next: next entry + * @head: list head + * @stop: a flag checking if scanning will stop + */ +static void efi_pstore_scan_sysfs_exit(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head, bool stop) +{ + __efi_pstore_scan_sysfs_exit(pos, true); + if (stop) + __efi_pstore_scan_sysfs_exit(next, &next->list != head); +} + +/** + * efi_pstore_sysfs_entry_iter + * + * @data: function-specific data to pass to callback + * @pos: entry to begin iterating from + * + * You MUST call efivar_enter_iter_begin() before this function, and + * efivar_entry_iter_end() afterwards. + * + * It is possible to begin iteration from an arbitrary entry within + * the list by passing @pos. @pos is updated on return to point to + * the next entry of the last one passed to efi_pstore_read_func(). + * To begin iterating from the beginning of the list @pos must be %NULL. + */ +static int efi_pstore_sysfs_entry_iter(void *data, struct efivar_entry **pos) +{ + struct efivar_entry *entry, *n; + struct list_head *head = &efivar_sysfs_list; + int size = 0; + + if (!*pos) { + list_for_each_entry_safe(entry, n, head, list) { + efi_pstore_scan_sysfs_enter(entry, n, head); + + size = efi_pstore_read_func(entry, data); + efi_pstore_scan_sysfs_exit(entry, n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; + } + + list_for_each_entry_safe_from((*pos), n, head, list) { + efi_pstore_scan_sysfs_enter((*pos), n, head); + + size = efi_pstore_read_func((*pos), data); + efi_pstore_scan_sysfs_exit((*pos), n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; +} + +/** + * efi_pstore_read + * + * This function returns a size of NVRAM entry logged via efi_pstore_write(). + * The meaning and behavior of efi_pstore/pstore are as below. + * + * size > 0: Got data of an entry logged via efi_pstore_write() successfully, + * and pstore filesystem will continue reading subsequent entries. + * size == 0: Entry was not logged via efi_pstore_write(), + * and efi_pstore driver will continue reading subsequent entries. + * size < 0: Failed to get data of entry logging via efi_pstore_write(), + * and pstore will stop reading entry. + */ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count, struct timespec *timespec, char **buf, bool *compressed, struct pstore_info *psi) { struct pstore_read_data data; + ssize_t size; data.id = id; data.type = type; @@ -112,8 +216,17 @@ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, data.compressed = compressed; data.buf = buf; - return __efivar_entry_iter(efi_pstore_read_func, &efivar_sysfs_list, &data, - (struct efivar_entry **)&psi->data); + *data.buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL); + if (!*data.buf) + return -ENOMEM; + + efivar_entry_iter_begin(); + size = efi_pstore_sysfs_entry_iter(&data, + (struct efivar_entry **)&psi->data); + efivar_entry_iter_end(); + if (size <= 0) + kfree(*data.buf); + return size; } static int efi_pstore_write(enum pstore_type_id type, @@ -184,9 +297,17 @@ static int efi_pstore_erase_func(struct efivar_entry *entry, void *data) return 0; } + if (entry->scanning) { + /* + * Skip deletion because this entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + /* found */ __efivar_entry_delete(entry); - list_del(&entry->list); return 1; } @@ -214,10 +335,12 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, efivar_entry_iter_begin(); found = __efivar_entry_iter(efi_pstore_erase_func, &efivar_sysfs_list, &edata, &entry); - efivar_entry_iter_end(); - if (found) + if (found && !entry->scanning) { + efivar_entry_iter_end(); efivar_unregister(entry); + } else + efivar_entry_iter_end(); return 0; } diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index 933eb02..3dc2482 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -383,12 +383,16 @@ static ssize_t efivar_delete(struct file *filp, struct kobject *kobj, else if (__efivar_entry_delete(entry)) err = -EIO; - efivar_entry_iter_end(); - - if (err) + if (err) { + efivar_entry_iter_end(); return err; + } - efivar_unregister(entry); + if (!entry->scanning) { + efivar_entry_iter_end(); + efivar_unregister(entry); + } else + efivar_entry_iter_end(); /* It's dead Jim.... */ return count; diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 391c67b..b22659c 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -683,8 +683,16 @@ struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid, if (!found) return NULL; - if (remove) - list_del(&entry->list); + if (remove) { + if (entry->scanning) { + /* + * The entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + } return entry; } diff --git a/include/linux/efi.h b/include/linux/efi.h index bc5687d..11ce678 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -801,6 +801,8 @@ struct efivar_entry { struct efi_variable var; struct list_head list; struct kobject kobj; + bool scanning; + bool deleting; }; @@ -866,6 +868,8 @@ void efivar_run_worker(void); #if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE) int efivars_sysfs_init(void); +#define EFIVARS_DATA_SIZE_MAX 1024 + #endif /* CONFIG_EFI_VARS */ #endif /* _LINUX_EFI_H */ -- cgit v0.10.2 From 1f3a8bae21a22808f242ccfb22aca37a635e261e Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 11 Nov 2013 16:18:59 +0000 Subject: x86/efi: Fix earlyprintk off-by-one bug Dave reported seeing the following incorrect output on his Thinkpad T420 when using earlyprintk=efi, [ 0.000000] efi: EFI v2.00 by Lenovo ACPI=0xdabfe000 ACPI 2.0=0xdabfe014 SMBIOS=0xdaa9e000 The output should be on one line, not split over two. The cause is an off-by-one error when checking that the efi_y coordinate hasn't been incremented out of bounds. Reported-by: Dave Young Signed-off-by: Matt Fleming diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 6599a00..81b506d 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) efi_y += font->height; } - if (efi_y + font->height >= si->lfb_height) { + if (efi_y + font->height > si->lfb_height) { u32 i; efi_y -= font->height; -- cgit v0.10.2 From 32cf0cb0294814cb1ee5d8727e9aac0e9aa80d2e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 28 Nov 2013 22:10:38 +0200 Subject: drm/i915: Fix pipe CSC post offset calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were miscalculating the pipe CSC post offset for the full->limited range conversion. The resulting post offset was double what it was supposed to be, which caused blacks to come out grey when using limited range output on HSW+. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71769 Cc: stable@vger.kernel.org Tested-by: Lauri Mylläri Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0d93695..898bd98 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5815,7 +5815,7 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc) uint16_t postoff = 0; if (intel_crtc->config.limited_color_range) - postoff = (16 * (1 << 13) / 255) & 0x1fff; + postoff = (16 * (1 << 12) / 255) & 0x1fff; I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff); I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff); -- cgit v0.10.2 From 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 23 Oct 2013 06:25:40 -0400 Subject: [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index db6dfcf..ab58556 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; + shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 281029d..b0bb056 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1623,6 +1623,7 @@ static struct scsi_host_template scsi_driver_template = { .cmd_per_lun = 1, .can_queue = 1, .sdev_attrs = sbp2_scsi_sysfs_attrs, + .no_write_same = 1, }; MODULE_AUTHOR("Kristian Hoegsberg "); diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5e1e12c..0a73253 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twa_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index c845bdb..4de3460 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twl_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index b9276d1..752624e 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -2279,7 +2279,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = tw_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index f0d432c..4921ed19 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1081,6 +1081,7 @@ static struct scsi_host_template aac_driver_template = { #endif .use_clustering = ENABLE_CLUSTERING, .emulated = 1, + .no_write_same = 1, }; static void __aac_shutdown(struct aac_dev * aac) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 97fd450..4f6a30b 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = { .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = arcmsr_host_attrs, + .no_write_same = 1, }; static struct pci_device_id arcmsr_device_id_table[] = { {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)}, diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index ee4fa40..ce5ef0190 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4684,6 +4684,7 @@ static struct scsi_host_template gdth_template = { .cmd_per_lun = GDTH_MAXC_P_L, .unchecked_isa_dma = 1, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; #ifdef CONFIG_ISA diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f334859..f2c5005 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -395,6 +395,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->use_clustering = sht->use_clustering; shost->ordered_tag = sht->ordered_tag; shost->eh_deadline = shost_eh_deadline * HZ; + shost->no_write_same = sht->no_write_same; if (sht->supported_mode == MODE_UNKNOWN) /* means we didn't set it ... default to INITIATOR */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 22f6432..2336bef 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -561,6 +561,7 @@ static struct scsi_host_template hpsa_driver_template = { .sdev_attrs = hpsa_sdev_attrs, .shost_attrs = hpsa_shost_attrs, .max_sectors = 8192, + .no_write_same = 1, }; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 36ac1c3..573f412 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6305,7 +6305,8 @@ static struct scsi_host_template driver_template = { .use_clustering = ENABLE_CLUSTERING, .shost_attrs = ipr_ioa_attrs, .sdev_attrs = ipr_dev_attrs, - .proc_name = IPR_NAME + .proc_name = IPR_NAME, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 8d5ea8a..52a216f 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = { .sg_tablesize = IPS_MAX_SG, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 90c95a3..816db12 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4244,6 +4244,7 @@ static struct scsi_host_template megaraid_template = { .eh_device_reset_handler = megaraid_reset, .eh_bus_reset_handler = megaraid_reset, .eh_host_reset_handler = megaraid_reset, + .no_write_same = 1, }; static int diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d1a4b82..e2237a9 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = { .eh_host_reset_handler = megaraid_reset_handler, .change_queue_depth = megaraid_change_queue_depth, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, .sdev_attrs = megaraid_sdev_attrs, .shost_attrs = megaraid_shost_attrs, }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0a743a5..c99812b 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2148,6 +2148,7 @@ static struct scsi_host_template megasas_template = { .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, .change_queue_depth = megasas_change_queue_depth, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743..f413ef7 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -4315,6 +4315,7 @@ static struct scsi_host_template pmcraid_host_template = { .this_id = -1, .sg_tablesize = PMCRAID_MAX_IOADLS, .max_sectors = PMCRAID_IOA_MAX_SECTORS, + .no_write_same = 1, .cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = pmcraid_host_attrs, diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e6c4bff..69725f7 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2659,6 +2659,12 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) { struct scsi_device *sdev = sdkp->device; + if (sdev->host->no_write_same) { + sdev->no_write_same = 1; + + return; + } + if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { /* too large values might cause issues with arcmsr */ int vpd_buf_len = 64; diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1a28f56..17d7404 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1697,6 +1697,7 @@ static struct scsi_host_template scsi_driver = { .use_clustering = DISABLE_CLUSTERING, /* Make sure we dont get a sg segment crosses a page boundary */ .dma_boundary = PAGE_SIZE-1, + .no_write_same = 1, }; enum { diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 5460849..fe3b58e 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -475,6 +475,9 @@ struct scsi_host_template { */ unsigned ordered_tag:1; + /* True if the controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Countdown for host blocking with no commands outstanding. */ @@ -677,6 +680,9 @@ struct Scsi_Host { /* Don't resume host in EH */ unsigned eh_noresume:1; + /* The controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Optional work queue to be utilized by the transport */ -- cgit v0.10.2 From eb82594b75b0cf54c667189e061934b7c49b5d42 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 29 Nov 2013 15:10:20 +0800 Subject: ALSA: hda - Add mono speaker quirk for Dell Inspiron 5439 This machine also has mono output if run through DAC node 0x03. Cc: stable@vger.kernel.org (v3.10+) BugLink: https://bugs.launchpad.net/bugs/1256212 Tested-by: David Chen Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c770bdb..6366a66 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4202,6 +4202,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0614, "Dell Inspiron 3135", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x061f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x063f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), -- cgit v0.10.2 From 4d6ff250857a8b5f8e33ea62ff16f165085f8655 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Nov 2013 11:14:09 +0300 Subject: ALSA: dice: fix array limits in dice_proc_read() The array limits are supposed to be in units of u32 instead of in bytes. The current code has a potential array overflow. Fixes: c614475b0ea9 ('ALSA: dice: add a proc file to show device information') Signed-off-by: Dan Carpenter Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/firewire/dice.c b/sound/firewire/dice.c index 57bcd31..c0aa649 100644 --- a/sound/firewire/dice.c +++ b/sound/firewire/dice.c @@ -1019,7 +1019,7 @@ static void dice_proc_read(struct snd_info_entry *entry, if (dice_proc_read_mem(dice, &tx_rx_header, sections[2], 2) < 0) return; - quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx)); + quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx) / 4); for (stream = 0; stream < tx_rx_header.number; ++stream) { if (dice_proc_read_mem(dice, &buf.tx, sections[2] + 2 + stream * tx_rx_header.size, @@ -1045,7 +1045,7 @@ static void dice_proc_read(struct snd_info_entry *entry, if (dice_proc_read_mem(dice, &tx_rx_header, sections[4], 2) < 0) return; - quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx)); + quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx) / 4); for (stream = 0; stream < tx_rx_header.number; ++stream) { if (dice_proc_read_mem(dice, &buf.rx, sections[4] + 2 + stream * tx_rx_header.size, -- cgit v0.10.2 From fdeadb43fdf1e7d5698c027b555c389174548e5a Mon Sep 17 00:00:00 2001 From: Madper Xie Date: Fri, 29 Nov 2013 15:58:57 +0800 Subject: efi-pstore: Make efi-pstore return a unique id Pstore fs expects that backends provide a unique id which could avoid pstore making entries as duplication or denominating entries the same name. So I combine the timestamp, part and count into id. Signed-off-by: Madper Xie Cc: Seiji Aguchi Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 6ce31e9..743fd42 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -37,6 +37,12 @@ struct pstore_read_data { char **buf; }; +static inline u64 generic_id(unsigned long timestamp, + unsigned int part, int count) +{ + return (timestamp * 100 + part) * 1000 + count; +} + static int efi_pstore_read_func(struct efivar_entry *entry, void *data) { efi_guid_t vendor = LINUX_EFI_CRASH_GUID; @@ -55,7 +61,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) if (sscanf(name, "dump-type%u-%u-%d-%lu-%c", cb_data->type, &part, &cnt, &time, &data_type) == 5) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -65,7 +71,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) *cb_data->compressed = false; } else if (sscanf(name, "dump-type%u-%u-%d-%lu", cb_data->type, &part, &cnt, &time) == 4) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -77,7 +83,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) * which doesn't support holding * multiple logs, remains. */ - *cb_data->id = part; + *cb_data->id = generic_id(time, part, 0); *cb_data->count = 0; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -320,14 +326,16 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, char name[DUMP_NAME_LEN]; efi_char16_t efi_name[DUMP_NAME_LEN]; int found, i; + unsigned int part; - sprintf(name, "dump-type%u-%u-%d-%lu", type, (unsigned int)id, count, - time.tv_sec); + do_div(id, 1000); + part = do_div(id, 100); + sprintf(name, "dump-type%u-%u-%d-%lu", type, part, count, time.tv_sec); for (i = 0; i < DUMP_NAME_LEN; i++) efi_name[i] = name[i]; - edata.id = id; + edata.id = part; edata.type = type; edata.count = count; edata.time = time; -- cgit v0.10.2 From 0e576acbc1d9600cf2d9b4a141a2554639959d50 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Nov 2013 12:18:13 +0100 Subject: nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko Reported-by: Borislav Petkov Signed-off-by: Thomas Gleixner diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index a12df5a..ea20f7d 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -711,8 +711,10 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts) return false; } - if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) + if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) { + ts->sleep_length = (ktime_t) { .tv64 = NSEC_PER_SEC/HZ }; return false; + } if (need_resched()) return false; -- cgit v0.10.2 From a1216444283e81fd904593a4a77c90adfe5d14d1 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Thu, 21 Nov 2013 13:47:16 -0200 Subject: drm/i915: use the correct force_wake function at the PC8 code When I submitted the first patch adding these force wake functions, Chris Wilson observed that I was using the wrong functions, so I sent a second version of the patch to correct this problem. The problem is that v1 was merged instead of v2. I was able to notice the problem when running the debugfs-forcewake-user subtest of pm_pc8 from intel-gpu-tools. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 898bd98..350afee 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6402,7 +6402,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) /* Make sure we're not on PC8 state before disabling PC8, otherwise * we'll hang the machine! */ - dev_priv->uncore.funcs.force_wake_get(dev_priv); + gen6_gt_force_wake_get(dev_priv); if (val & LCPLL_POWER_DOWN_ALLOW) { val &= ~LCPLL_POWER_DOWN_ALLOW; @@ -6436,7 +6436,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) DRM_ERROR("Switching back to LCPLL failed\n"); } - dev_priv->uncore.funcs.force_wake_put(dev_priv); + gen6_gt_force_wake_put(dev_priv); } void hsw_enable_pc8_work(struct work_struct *__work) -- cgit v0.10.2 From b317828beec632791a440a677de5116ab9bd900a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 11:10:24 -0300 Subject: [media] v4l: vsp1: Fix error return code in vsp1_video_init() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 714c53e..4b0ac07 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -1026,8 +1026,10 @@ int vsp1_video_init(struct vsp1_video *video, struct vsp1_entity *rwpf) /* ... and the buffers queue... */ video->alloc_ctx = vb2_dma_contig_init_ctx(video->vsp1->dev); - if (IS_ERR(video->alloc_ctx)) + if (IS_ERR(video->alloc_ctx)) { + ret = PTR_ERR(video->alloc_ctx); goto error; + } video->queue.type = video->type; video->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; -- cgit v0.10.2 From 22613c96b408f6315f6e1a2794adc0d04f55d7b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 29 Nov 2013 13:13:42 +0200 Subject: drm/i915: Make the DERRMR SRM target global GTT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ring scratch pages don't have a PPGTT mapping, so the DERRM SRM should target the global GTT instead. v2: Add MI_SRM_LRM_GLOBAL_GTT define for -fixes Reviewed-by: Chris Wilson Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f9eafb6..ee27421 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -235,6 +235,7 @@ */ #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) #define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*x-1) +#define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 350afee..080f6fd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8354,7 +8354,8 @@ static int intel_gen7_queue_flip(struct drm_device *dev, intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE | DERRMR_PIPEB_PRI_FLIP_DONE | DERRMR_PIPEC_PRI_FLIP_DONE)); - intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1)); + intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | + MI_SRM_LRM_GLOBAL_GTT); intel_ring_emit(ring, DERRMR); intel_ring_emit(ring, ring->scratch.gtt_offset + 256); } -- cgit v0.10.2 From 0bf2134780e321a8af93315d99e575a821ee1a77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 29 Nov 2013 14:56:12 +0200 Subject: drm/i915: MI_PREDICATE_RESULT_2 is HSW only MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MI_PREDICATE_RESULT_2 register exits only on HSW. On other platforms the same offset is either reserved, or contains some other register. So write the register only on HSW. This regression has been introduced in commit 9435373ef8870e0a84b6fec0ad89b952bf3097fa Author: Rodrigo Vivi Date: Wed Aug 28 16:45:46 2013 -0300 drm/i915: Report enabled slices on Haswell GT3 Signed-off-by: Ville Syrjälä [danvet: Add regression notice.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 12bbd5e..621c7c6 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4442,10 +4442,9 @@ i915_gem_init_hw(struct drm_device *dev) if (dev_priv->ellc_size) I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf)); - if (IS_HSW_GT3(dev)) - I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_ENABLED); - else - I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_DISABLED); + if (IS_HASWELL(dev)) + I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev) ? + LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED); if (HAS_PCH_NOP(dev)) { u32 temp = I915_READ(GEN7_MSG_CTL); -- cgit v0.10.2 From 4fd1fb7af5c19ccfc1dba66ba7ffaf0fb3be6ee1 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sat, 2 Nov 2013 21:09:07 -0300 Subject: [media] gspca-stk1135: Add delay after configuring clock Add a small delay at the end of configure_clock() to allow sensor to initialize. This is needed by Asus VX2S laptop webcam to detect sensor type properly (the already-supported MT9M112). Signed-off-by: Ondrej Zary Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c index 1fc80af..48234c9 100644 --- a/drivers/media/usb/gspca/stk1135.c +++ b/drivers/media/usb/gspca/stk1135.c @@ -361,6 +361,9 @@ static void stk1135_configure_clock(struct gspca_dev *gspca_dev) /* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */ reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f); + + /* wait a while for sensor to catch up */ + udelay(1000); } static void stk1135_camera_disable(struct gspca_dev *gspca_dev) -- cgit v0.10.2 From 858559a29258a30d9f4839286b4aca6ab8c5c8d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Nov 2013 10:03:57 -0300 Subject: [media] gspca_sunplus: Add new usb-id for 06d6:0041 Reported-by: mjs Tested-by: mjs Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c index a517d18..46c9f22 100644 --- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -1027,6 +1027,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)}, {USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)}, {USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)}, + {USB_DEVICE(0x06d6, 0x0041), BS(SPCA504B, 0)}, {USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)}, {USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)}, -- cgit v0.10.2 From 6633327d59067fe16128d66968cd50a10ca7a09c Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 9 Nov 2013 18:28:43 -0300 Subject: [media] dvb_demux: fix deadlock in dmx_section_feed_release_filter() dmx_section_feed_release_filter() locks dvbdmx->mutex and if the feed is still filtering, it calls feed->stop_filtering(feed). stop_filtering() is implemented by dmx_section_feed_stop_filtering() that first of all try to lock the same mutex: dvbdmx->mutex. That leads to a deadlock. It does not happen often in practice because all callers of release_filter() stop filtering by themselves. So the problem can happen in case of race condition only. The patch releases dvbdmx->mutex before call to feed->stop_filtering(feed) and reacquires the mutex after that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 58de441..25f3c64 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1032,8 +1032,13 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, return -EINVAL; } - if (feed->is_filtering) + if (feed->is_filtering) { + /* release dvbdmx->mutex as far as + it is acquired by stop_filtering() itself */ + mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); + mutex_lock(&dvbdmx->mutex); + } spin_lock_irq(&dvbdmx->lock); f = dvbdmxfeed->filter; -- cgit v0.10.2 From 340f70e911376c6b87e28e7ba3083e24893cb724 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Nov 2013 18:30:13 -0300 Subject: [media] dvb_demux: clean up whitespace in comments from previous patch (trivial) removes trailing whitespace and rebalance line length in comment block Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 25f3c64..eeb8d7f 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1033,8 +1033,8 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed, } if (feed->is_filtering) { - /* release dvbdmx->mutex as far as - it is acquired by stop_filtering() itself */ + /* release dvbdmx->mutex as far as it is + acquired by stop_filtering() itself */ mutex_unlock(&dvbdmx->mutex); feed->stop_filtering(feed); mutex_lock(&dvbdmx->mutex); -- cgit v0.10.2 From 648ad154646a899c03a137bd281ff182f5df0d40 Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 18:36:22 -0300 Subject: [media] technisat-usb2: fix typo in variable name The variable txlen was used instead of rxlen in boundary check. (copy-paste error) Signed-off-by: Felipe Pena Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index 40832a1..98d24ae 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -102,7 +102,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (rxlen > 62) { err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)", device_addr); - txlen = 62; + rxlen = 62; } b[0] = I2C_SPEED_100KHZ_BIT; -- cgit v0.10.2 From f286c2a4faed168843078d1f6fd112bf37dc4902 Mon Sep 17 00:00:00 2001 From: Evgeny Plehov Date: Sat, 9 Nov 2013 18:45:41 -0300 Subject: [media] cxd2820r_c: fix if_ctl calculation fixes tuning for DVB-C Signed-off-by: Evgeny Plehov Reviewed-by: Antti Palosaari Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c index 125a440..5c6ab49 100644 --- a/drivers/media/dvb-frontends/cxd2820r_c.c +++ b/drivers/media/dvb-frontends/cxd2820r_c.c @@ -78,7 +78,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) num = if_freq / 1000; /* Hz => kHz */ num *= 0x4000; - if_ctl = cxd2820r_div_u64_round_closest(num, 41000); + if_ctl = 0x4000 - cxd2820r_div_u64_round_closest(num, 41000); buf[0] = (if_ctl >> 8) & 0x3f; buf[1] = (if_ctl >> 0) & 0xff; -- cgit v0.10.2 From 993fc6ebaf4af6fdfde08cc8649c386e483a5908 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 29 Nov 2013 11:44:59 +0000 Subject: drm/i915: Pin pages whilst allocating for dma-buf vmap() During the vmap() routine for the dma-buf, we first grab the pages and then try to allocate a temporary array to pass to the vmap(). However, the shrinker can and will reap any object that is unbound if the allocation for the array first fails. This includes the object which we are attempting to vmap(). The solution is to mark the object's pages as pinned whilst we try the allocation to prevent the use-after-free introduced by the potential shrinkage. Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c index 7d5752f..9bb533e 100644 --- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c +++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c @@ -125,13 +125,15 @@ static void *i915_gem_dmabuf_vmap(struct dma_buf *dma_buf) ret = i915_gem_object_get_pages(obj); if (ret) - goto error; + goto err; + + i915_gem_object_pin_pages(obj); ret = -ENOMEM; pages = drm_malloc_ab(obj->base.size >> PAGE_SHIFT, sizeof(*pages)); if (pages == NULL) - goto error; + goto err_unpin; i = 0; for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) @@ -141,15 +143,16 @@ static void *i915_gem_dmabuf_vmap(struct dma_buf *dma_buf) drm_free_large(pages); if (!obj->dma_buf_vmapping) - goto error; + goto err_unpin; obj->vmapping_count = 1; - i915_gem_object_pin_pages(obj); out_unlock: mutex_unlock(&dev->struct_mutex); return obj->dma_buf_vmapping; -error: +err_unpin: + i915_gem_object_unpin_pages(obj); +err: mutex_unlock(&dev->struct_mutex); return ERR_PTR(ret); } -- cgit v0.10.2 From 8f1ec93ae94e95e717283575997dd134a4c5397f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 29 Nov 2013 13:33:11 +0000 Subject: ASoC: core: Use consistent byte ordering in snd_soc_bytes_get snd_soc_bytes_put treats the data in the binary control as big endian words, however snd_soc_bytes_get uses the endian of the host machine. This causes the two functions to be inconsistant with how the mask is applied on little endian machines. This patch applies the big_endian format used in snd_soc_bytes_put to snd_soc_bytes_get. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4e53d87..a66783e 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3212,11 +3212,11 @@ int snd_soc_bytes_get(struct snd_kcontrol *kcontrol, break; case 2: ((u16 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be16(~params->mask); break; case 4: ((u32 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be32(~params->mask); break; default: return -EINVAL; -- cgit v0.10.2 From 6ddf0fd1c462a418a3cbb8b0653820dc48ffbd98 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 Nov 2013 12:47:34 +0100 Subject: ALSA: hda - Fix silent output on ASUS W7J laptop The recent kernels got regressions on ASUS W7J with ALC660 codec where no sound comes out. After a long debugging session, we found out that setting the pin control on the unused NID 0x10 is mandatory for the outputs. And, it was found out that another magic of NID 0x0f that is required for other ASUS laptops isn't needed on this machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66081 Reported-and-tested-by: Andrey Lipaev Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6366a66..a98f329 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4494,6 +4494,7 @@ enum { ALC861_FIXUP_AMP_VREF_0F, ALC861_FIXUP_NO_JACK_DETECT, ALC861_FIXUP_ASUS_A6RP, + ALC660_FIXUP_ASUS_W7J, }; /* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */ @@ -4543,10 +4544,21 @@ static const struct hda_fixup alc861_fixups[] = { .v.func = alc861_fixup_asus_amp_vref_0f, .chained = true, .chain_id = ALC861_FIXUP_NO_JACK_DETECT, + }, + [ALC660_FIXUP_ASUS_W7J] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* ASUS W7J needs a magic pin setup on unused NID 0x10 + * for enabling outputs + */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, + { } + }, } }; static const struct snd_pci_quirk alc861_fixup_tbl[] = { + SND_PCI_QUIRK(0x1043, 0x1253, "ASUS W7J", ALC660_FIXUP_ASUS_W7J), SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP), SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F), SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT), -- cgit v0.10.2 From 0c413d10515feae02cee967b31bb8afea8aa0d29 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 8 Aug 2013 19:41:06 -0300 Subject: [media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by: Michael Piko Signed-off-by: Antti Palosaari Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index c8fcd78..798565c 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -1534,6 +1534,8 @@ static const struct usb_device_id af9035_id_table[] = { /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, + &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); -- cgit v0.10.2 From f8e1b699a5504a2da05834c7cfdddb125a8ce088 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 08:16:03 -0300 Subject: [media] bttv: don't setup the controls if there are no video devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The no_video flag was checked in all other cases except one. Calling v4l2_ctrl_handler_setup() if no_video is 1 will crash. This wasn't noticed before since there are only two card types that set no_video to 1, so this type of hardware is quite rare. Signed-off-by: Hans Verkuil Reported-by: Lorenz Röhrl Tested-by: Lorenz Röhrl Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index a3b1ee9..92a06fd 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -4182,7 +4182,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) } btv->std = V4L2_STD_PAL; init_irqreg(btv); - v4l2_ctrl_handler_setup(hdl); + if (!bttv_tvcards[btv->c.type].no_video) + v4l2_ctrl_handler_setup(hdl); if (hdl->error) { result = hdl->error; goto fail2; -- cgit v0.10.2 From 89f4d45b2752df5d222b5f63919ce59e2d8afaf4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 25 Oct 2013 06:34:03 -0300 Subject: [media] saa7164: fix return value check in saa7164_initdev() In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 57ef545..1bf0697 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -1354,9 +1354,11 @@ static int saa7164_initdev(struct pci_dev *pci_dev, if (fw_debug) { dev->kthread = kthread_run(saa7164_thread_function, dev, "saa7164 debug"); - if (!dev->kthread) + if (IS_ERR(dev->kthread)) { + dev->kthread = NULL; printk(KERN_ERR "%s() Failed to create " "debug kernel thread\n", __func__); + } } } /* != BOARD_UNKNOWN */ -- cgit v0.10.2 From 7e4b918750b494b68e24222dea5f7d85e90db022 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Nov 2013 07:34:40 -0300 Subject: [media] cx231xx: use after free on error path in probe We dereference "dev" after it has already been freed. Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index e9d017b..528cce9 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1412,8 +1412,8 @@ err_v4l2: usb_set_intfdata(interface, NULL); err_if: usb_put_dev(udev); - kfree(dev); clear_bit(dev->devno, &cx231xx_devused); + kfree(dev); return retval; } -- cgit v0.10.2 From 9ba6a91f19b8c118d11c549495fa4f7a20505d80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 4 Nov 2013 06:28:57 -0300 Subject: [media] tef6862/radio-tea5764: actually assign clamp result When adding frequency clamping to the tef6862 and radio-tea5764 drivers I forgot to actually *assign* the clamp result to the frequency. Signed-off-by: Hans Verkuil Reported-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org # for 3.11 and up diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 036e2f5..3ed1f56 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -356,7 +356,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, So we keep it as-is. */ return -EINVAL; } - clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); + freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); tea5764_power_up(radio); tea5764_tune(radio, (freq * 125) / 2); return 0; diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c index 69e3245..a9319a2 100644 --- a/drivers/media/radio/tef6862.c +++ b/drivers/media/radio/tef6862.c @@ -112,7 +112,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen if (f->tuner != 0) return -EINVAL; - clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); + freq = clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ); pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL; i2cmsg[0] = (MSA_MODE_PRESET << MSA_MODE_SHIFT) | WM_SUB_PLLM; i2cmsg[1] = (pll >> 8) & 0xff; -- cgit v0.10.2 From dff04d34b1171bc33e30ef391c2d2ce7be2beb98 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Mon, 4 Nov 2013 23:18:15 -0300 Subject: [media] marvell-ccic: drop resource free in driver remove The mmp-driver is using devm_* to allocate the resource. The old resource release methods are not appropriate here. Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 3458fa0..70cb57f 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -478,18 +478,11 @@ out_deinit_clk: static int mmpcam_remove(struct mmp_camera *cam) { struct mcam_camera *mcam = &cam->mcam; - struct mmp_camera_platform_data *pdata; mmpcam_remove_device(cam); mccic_shutdown(mcam); mmpcam_power_down(mcam); - pdata = cam->pdev->dev.platform_data; - gpio_free(pdata->sensor_reset_gpio); - gpio_free(pdata->sensor_power_gpio); mcam_deinit_clk(mcam); - iounmap(cam->power_regs); - iounmap(mcam->regs); - kfree(cam); return 0; } -- cgit v0.10.2 From 3af41a337a5b270de3e65466a07f106ad97ad0c6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 11 Nov 2013 11:02:52 -0300 Subject: [media] wm8775: fix broken audio routing Commit 5aa9ae5ed5d449a85fbf7aac3d1fdc241c542a79 inverted the mute control state test in s_routing which caused the audio routing to fail. This broke ivtv support for the Hauppauge video/audio input bracket (which adds additional video and audio inputs) all the way back in kernel 2.6.36. This fix fixes the condition and it also removes a nonsense check on the balance control. Bisected-by: Rajil Saraswat Signed-off-by: Andy Walls Reported-by: Rajil Saraswat Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/wm8775.c b/drivers/media/i2c/wm8775.c index 3f584a7..bee7946 100644 --- a/drivers/media/i2c/wm8775.c +++ b/drivers/media/i2c/wm8775.c @@ -130,12 +130,10 @@ static int wm8775_s_routing(struct v4l2_subdev *sd, return -EINVAL; } state->input = input; - if (!v4l2_ctrl_g_ctrl(state->mute)) + if (v4l2_ctrl_g_ctrl(state->mute)) return 0; if (!v4l2_ctrl_g_ctrl(state->vol)) return 0; - if (!v4l2_ctrl_g_ctrl(state->bal)) - return 0; wm8775_set_audio(sd, 1); return 0; } -- cgit v0.10.2 From 39434abd942c8e4b9c14c06a03b3245beaf8467f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 29 Nov 2013 12:56:10 -0500 Subject: n_tty: Fix missing newline echo When L_ECHONL is on, newlines are echoed regardless of the L_ECHO state; if set, ensure accumulated echoes are flushed before finishing the current input processing and before more output. Cc: # 3.12.x Reported-by: Jason Gunthorpe Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0f74945..268b627 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -810,7 +810,8 @@ static void process_echoes(struct tty_struct *tty) struct n_tty_data *ldata = tty->disc_data; size_t echoed; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); @@ -825,7 +826,8 @@ static void flush_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_head) return; mutex_lock(&ldata->output_lock); -- cgit v0.10.2 From bd4b9683623d0d91e87cf22f09008c05f56d7483 Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 21 Nov 2013 09:08:03 -0500 Subject: sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this: In file included from drivers/edac/sb_edac.c:27:0: drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized] printk(level "EDAC " prefix ": " fmt, ##arg) ^ drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here u64 ch_addr, offset, limit, prv = 0; Limit can be initialized to 0. The only way limit wouldn't be initialized is if there are no DIMMs present (which would be a bug of course) and it'd fail on the next test. Signed-off-by: Aristeu Rozanski Cc: Mauro Carvalho Chehab Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic Signed-off-by: Borislav Petkov diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 8472405..d7f1b57 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -945,7 +945,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, u32 tad_offset; u32 rir_way; u32 mb, kb; - u64 ch_addr, offset, limit, prv = 0; + u64 ch_addr, offset, limit = 0, prv = 0; /* -- cgit v0.10.2 From 0576da2c08e3d332f1b0653030d28ab804585ab6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 20 Nov 2013 23:07:42 +0100 Subject: parisc: fix mmap(MAP_FIXED|MAP_SHARED) to already mmapped address locale-gen on Debian showed a strange problem on parisc: mmap2(NULL, 536870912, PROT_NONE, MAP_SHARED, 3, 0) = 0x42a54000 mmap2(0x42a54000, 103860, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_FIXED, 3, 0) = -1 EINVAL (Invalid argument) Basically it was just trying to re-mmap() a file at the same address which it was given by a previous mmap() call. But this remapping failed with EINVAL. The problem is, that when MAP_FIXED and MAP_SHARED flags were used, we didn't included the mapping-based offset when we verified the alignment of the given fixed address against the offset which we calculated it in the previous call. Signed-off-by: Helge Deller Cc: # 3.10+ diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index 5dfd248..0d3a9d4 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -61,8 +61,15 @@ static int get_offset(struct address_space *mapping) return (unsigned long) mapping >> 8; } -static unsigned long get_shared_area(struct address_space *mapping, - unsigned long addr, unsigned long len, unsigned long pgoff) +static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff) +{ + struct address_space *mapping = filp ? filp->f_mapping : NULL; + + return (get_offset(mapping) + pgoff) << PAGE_SHIFT; +} + +static unsigned long get_shared_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff) { struct vm_unmapped_area_info info; @@ -71,7 +78,7 @@ static unsigned long get_shared_area(struct address_space *mapping, info.low_limit = PAGE_ALIGN(addr); info.high_limit = TASK_SIZE; info.align_mask = PAGE_MASK & (SHMLBA - 1); - info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT; + info.align_offset = shared_align_offset(filp, pgoff); return vm_unmapped_area(&info); } @@ -82,20 +89,18 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, return -ENOMEM; if (flags & MAP_FIXED) { if ((flags & MAP_SHARED) && - (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + (addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1)) return -EINVAL; return addr; } if (!addr) addr = TASK_UNMAPPED_BASE; - if (filp) { - addr = get_shared_area(filp->f_mapping, addr, len, pgoff); - } else if(flags & MAP_SHARED) { - addr = get_shared_area(NULL, addr, len, pgoff); - } else { + if (filp || (flags & MAP_SHARED)) + addr = get_shared_area(filp, addr, len, pgoff); + else addr = get_unshared_area(addr, len); - } + return addr; } -- cgit v0.10.2 From 8f96bdfd6f545b0a999cf97625b5bf8a23014a2d Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 23 Nov 2013 00:25:43 +0100 Subject: parisc: add some more machine names to hardware database Sadly the correct names for machines which end with a question-mark aren't known, so let's give it a best-guessed-name. Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 06cb399..608716f 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -36,6 +36,9 @@ * HP PARISC Hardware Database * Access to this database is only possible during bootup * so don't reference this table after starting the init process + * + * NOTE: Product names which are listed here and ends with a '?' + * are guessed. If you know the correct name, please let us know. */ static struct hp_hardware hp_hardware_list[] = { @@ -222,7 +225,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, - {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, @@ -276,9 +279,11 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"}, {HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"}, {HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"}, + {HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"}, {HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"}, {HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"}, {HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"}, + {HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"}, {HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"}, {HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"}, {HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"}, -- cgit v0.10.2 From 6c3215cd5d31584c8ae77a99255c72dba2565918 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 31 Oct 2013 15:37:46 +0800 Subject: parisc: remove empty SERIAL_PORT_DFNS in serial.h If architectures don't support SERIAL_PORT_DFNS, they need not define it to "nothing", the related drivers need do it by themselves (e.g. 8250 serial driver). Signed-off-by: Chen Gang Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/serial.h b/arch/parisc/include/asm/serial.h index d7e3cc6..77e9b67 100644 --- a/arch/parisc/include/asm/serial.h +++ b/arch/parisc/include/asm/serial.h @@ -6,5 +6,3 @@ * This is used for 16550-compatible UARTs */ #define BASE_BAUD ( 1843200 / 16 ) - -#define SERIAL_PORT_DFNS -- cgit v0.10.2 From c790b41bac83512dc67da89b582daa6f4e1fab07 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 30 Nov 2013 21:23:20 +0100 Subject: parisc: use kernel_text_address() in unwind functions Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 76ed62e..ddd988b 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -168,7 +168,7 @@ void unwind_table_remove(struct unwind_table *table) } /* Called from setup_arch to import the kernel unwind info */ -int unwind_init(void) +int __init unwind_init(void) { long start, stop; register unsigned long gp __asm__ ("r27"); @@ -233,7 +233,6 @@ static void unwind_frame_regs(struct unwind_frame_info *info) e = find_unwind_entry(info->ip); if (e == NULL) { unsigned long sp; - extern char _stext[], _etext[]; dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip); @@ -281,8 +280,7 @@ static void unwind_frame_regs(struct unwind_frame_info *info) break; info->prev_ip = tmp; sp = info->prev_sp; - } while (info->prev_ip < (unsigned long)_stext || - info->prev_ip > (unsigned long)_etext); + } while (!kernel_text_address(info->prev_ip)); info->rp = 0; @@ -435,9 +433,8 @@ unsigned long return_address(unsigned int level) do { if (unwind_once(&info) < 0 || info.ip == 0) return 0; - if (!__kernel_text_address(info.ip)) { + if (!kernel_text_address(info.ip)) return 0; - } } while (info.ip && level--); return info.ip; -- cgit v0.10.2 From 161bd3bf60ee2c5765455ad3e3da967d03449f4a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 30 Nov 2013 22:07:51 +0100 Subject: parisc: fix kernel memory layout in vmlinux.ld.S When building a 64bit kernel sometimes functions in the .init section were not able to reach the standard kernel function. Main reason for this problem is, that the linkage tables (.plt, .opd, .dlt) tend to become pretty huge and thus the distance gets too big for short calls. One option to avoid this is to use the -mlong-calls compiler option, but this increases the binary size and introduces a performance penalty. Instead, with this patch we just lay out the binary differently. Init code is stored first, followed by text, R/O and finally R/W data. This means, that init and text code is now much closer to each other, which is sufficient to reach each other by short calls. Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index d2d5825..d4dc588 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -41,9 +41,7 @@ END(boot_args) .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ #endif /*!CONFIG_64BIT*/ - .export _stext,data /* Kernel want it this way! */ -_stext: -ENTRY(stext) +ENTRY(parisc_kernel_start) .proc .callinfo @@ -347,7 +345,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -ENDPROC(stext) +ENDPROC(parisc_kernel_start) #ifndef CONFIG_64BIT .section .data..read_mostly diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 4bb095a..0dacc5c 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -6,24 +6,19 @@ * Copyright (C) 2000 Michael Ang * Copyright (C) 2002 Randolph Chung * Copyright (C) 2003 James Bottomley - * Copyright (C) 2006 Helge Deller - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Copyright (C) 2006-2013 Helge Deller + */ + +/* + * Put page table entries (swapper_pg_dir) as the first thing in .bss. This + * will ensure that it has .bss alignment (PAGE_SIZE). */ +#define BSS_FIRST_SECTIONS *(.data..vm0.pmd) \ + *(.data..vm0.pgd) \ + *(.data..vm0.pte) + #include + /* needed for the processor specific cache alignment size */ #include #include @@ -39,7 +34,7 @@ OUTPUT_FORMAT("elf64-hppa-linux") OUTPUT_ARCH(hppa:hppa2.0w) #endif -ENTRY(_stext) +ENTRY(parisc_kernel_start) #ifndef CONFIG_64BIT jiffies = jiffies_64 + 4; #else @@ -49,11 +44,29 @@ SECTIONS { . = KERNEL_BINARY_TEXT_START; + __init_begin = .; + HEAD_TEXT_SECTION + INIT_TEXT_SECTION(8) + + . = ALIGN(PAGE_SIZE); + INIT_DATA_SECTION(PAGE_SIZE) + /* we have to discard exit text and such at runtime, not link time */ + .exit.text : + { + EXIT_TEXT + } + .exit.data : + { + EXIT_DATA + } + PERCPU_SECTION(8) + . = ALIGN(PAGE_SIZE); + __init_end = .; + /* freed after init ends here */ + _text = .; /* Text and read-only data */ - .head ALIGN(16) : { - HEAD_TEXT - } = 0 - .text ALIGN(16) : { + _stext = .; + .text ALIGN(PAGE_SIZE) : { TEXT_TEXT SCHED_TEXT LOCK_TEXT @@ -68,21 +81,28 @@ SECTIONS *(.lock.text) /* out-of-line lock text */ *(.gnu.warning) } - /* End of text section */ + . = ALIGN(PAGE_SIZE); _etext = .; + /* End of text section */ /* Start of data section */ _sdata = .; - RODATA + RO_DATA_SECTION(8) - /* writeable */ - /* Make sure this is page aligned so - * that we can properly leave these - * as writable - */ - . = ALIGN(PAGE_SIZE); - data_start = .; +#ifdef CONFIG_64BIT + . = ALIGN(16); + /* Linkage tables */ + .opd : { + *(.opd) + } PROVIDE (__gp = .); + .plt : { + *(.plt) + } + .dlt : { + *(.dlt) + } +#endif /* unwind info */ .PARISC.unwind : { @@ -91,7 +111,15 @@ SECTIONS __stop___unwind = .; } - EXCEPTION_TABLE(16) + /* writeable */ + /* Make sure this is page aligned so + * that we can properly leave these + * as writable + */ + . = ALIGN(PAGE_SIZE); + data_start = .; + + EXCEPTION_TABLE(8) NOTES /* Data */ @@ -107,54 +135,8 @@ SECTIONS _edata = .; /* BSS */ - __bss_start = .; - /* page table entries need to be PAGE_SIZE aligned */ - . = ALIGN(PAGE_SIZE); - .data..vmpages : { - *(.data..vm0.pmd) - *(.data..vm0.pgd) - *(.data..vm0.pte) - } - .bss : { - *(.bss) - *(COMMON) - } - __bss_stop = .; - -#ifdef CONFIG_64BIT - . = ALIGN(16); - /* Linkage tables */ - .opd : { - *(.opd) - } PROVIDE (__gp = .); - .plt : { - *(.plt) - } - .dlt : { - *(.dlt) - } -#endif + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8) - /* reserve space for interrupt stack by aligning __init* to 16k */ - . = ALIGN(16384); - __init_begin = .; - INIT_TEXT_SECTION(16384) - . = ALIGN(PAGE_SIZE); - INIT_DATA_SECTION(16) - /* we have to discard exit text and such at runtime, not link time */ - .exit.text : - { - EXIT_TEXT - } - .exit.data : - { - EXIT_DATA - } - - PERCPU_SECTION(L1_CACHE_BYTES) - . = ALIGN(PAGE_SIZE); - __init_end = .; - /* freed after init ends here */ _end = . ; STABS_DEBUG diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index b0f96c0..96f8168 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -32,6 +32,7 @@ #include extern int data_start; +extern void parisc_kernel_start(void); /* Kernel entry point in head.S */ #if PT_NLEVELS == 3 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout @@ -324,8 +325,9 @@ static void __init setup_bootmem(void) reserve_bootmem_node(NODE_DATA(0), 0UL, (unsigned long)(PAGE0->mem_free + PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT); - reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text), - (unsigned long)(_end - _text), BOOTMEM_DEFAULT); + reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START), + (unsigned long)(_end - KERNEL_BINARY_TEXT_START), + BOOTMEM_DEFAULT); reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT), ((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT), BOOTMEM_DEFAULT); @@ -378,6 +380,17 @@ static void __init setup_bootmem(void) request_resource(&sysram_resources[0], &pdcdata_resource); } +static int __init parisc_text_address(unsigned long vaddr) +{ + static unsigned long head_ptr __initdata; + + if (!head_ptr) + head_ptr = PAGE_MASK & (unsigned long) + dereference_function_descriptor(&parisc_kernel_start); + + return core_kernel_text(vaddr) || vaddr == head_ptr; +} + static void __init map_pages(unsigned long start_vaddr, unsigned long start_paddr, unsigned long size, pgprot_t pgprot, int force) @@ -466,7 +479,7 @@ static void __init map_pages(unsigned long start_vaddr, */ if (force) pte = __mk_pte(address, pgprot); - else if (core_kernel_text(vaddr) && + else if (parisc_text_address(vaddr) && address != fv_addr) pte = __mk_pte(address, PAGE_KERNEL_EXEC); else -- cgit v0.10.2 From b8d8fccd68c36a19fef9768d06aa150bbc8cdd74 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 30 Nov 2013 22:22:08 +0100 Subject: parisc: remove CONFIG_MLONGCALLS=y from defconfigs Signed-off-by: Helge Deller diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig index e1c8d20..bb81d02 100644 --- a/arch/parisc/configs/c8000_defconfig +++ b/arch/parisc/configs/c8000_defconfig @@ -20,7 +20,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_PA8X00=y -CONFIG_MLONGCALLS=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_PREEMPT=y diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig index 5874ceb..1413b8d 100644 --- a/arch/parisc/configs/generic-64bit_defconfig +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -24,7 +24,6 @@ CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_PA8X00=y -CONFIG_MLONGCALLS=y CONFIG_64BIT=y CONFIG_SMP=y # CONFIG_COMPACTION is not set -- cgit v0.10.2 From 2e311fbabdc23b7eaec77313dc3b9a151a5407b5 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 23 Sep 2013 13:33:41 -0500 Subject: [SCSI] hpsa: do not discard scsi status on aborted commands We inadvertantly discarded the scsi status for aborted commands. For some commands (e.g. reads from tape drives) these can't be retried, and if we discarded the scsi status, the scsi mid layer couldn't notice anything was wrong and the error was not reported. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 2336bef..595a2a7 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1289,7 +1289,7 @@ static void complete_scsi_command(struct CommandList *cp) "has check condition: aborted command: " "ASC: 0x%x, ASCQ: 0x%x\n", cp, asc, ascq); - cmd->result = DID_SOFT_ERROR << 16; + cmd->result |= DID_SOFT_ERROR << 16; break; } /* Must be some other type of check condition */ -- cgit v0.10.2 From 88bf6d62db4393fa03a58bada9d746312d5b496f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 1 Nov 2013 11:02:25 -0500 Subject: [SCSI] hpsa: return 0 from driver probe function on success, not 1 A return value of 1 is interpreted as an error. See pci_driver. in local_pci_probe(). If you're wondering how this ever could have worked, it's because it used to be the case that only return values less than zero were interpreted as failure. But even in the current kernel if the driver registers its various entry points with the kernel, and then returns a value which is interpreted as failure, those registrations aren't undone, so the driver still mostly works. However, the driver's remove function wouldn't be called on rmmod, and pci power management functions wouldn't work. In the case of Smart Array, since it has a battery backed cache (or else no cache) even if the driver is not shut down properly as long as there is no outstanding i/o, nothing too bad happens, which is why it took so long to notice. Requesting backport to stable because the change to pci-driver.c which requires driver probe functions to return 0 occurred between 2.6.35 and 2.6.36 (the pci power management breakage) and again between 3.7 and 3.8 (pci_dev->driver getting set to NULL in local_pci_probe() preventing driver remove function from being called on rmmod.) Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 595a2a7..20a5e6e 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -4926,7 +4926,7 @@ reinit_after_soft_reset: hpsa_hba_inquiry(h); hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ start_controller_lockup_detector(h); - return 1; + return 0; clean4: hpsa_free_sg_chain_blocks(h); -- cgit v0.10.2 From b884eb8c8502ca1fea497a02433c2b41de851f62 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 26 Nov 2013 11:03:57 -0800 Subject: Input: sur40 - suppress false uninitialized variable warning We will never use packet_id before initializing it as we start with "need_blobs == -1" and will set packet_id there. Also use le32_to_cpu when fetching header->packet_id. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index cfd1b7e..f1cb051 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -251,7 +251,7 @@ static void sur40_poll(struct input_polled_dev *polldev) struct sur40_state *sur40 = polldev->private; struct input_dev *input = polldev->input; int result, bulk_read, need_blobs, packet_blobs, i; - u32 packet_id; + u32 uninitialized_var(packet_id); struct sur40_header *header = &sur40->bulk_in_buffer->header; struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0]; @@ -286,7 +286,7 @@ static void sur40_poll(struct input_polled_dev *polldev) if (need_blobs == -1) { need_blobs = le16_to_cpu(header->count); dev_dbg(sur40->dev, "need %d blobs\n", need_blobs); - packet_id = header->packet_id; + packet_id = le32_to_cpu(header->packet_id); } /* -- cgit v0.10.2 From 4ef38351d770cc421f4a0c7a849fd13207fc5741 Mon Sep 17 00:00:00 2001 From: Christian Engelmayer Date: Tue, 26 Nov 2013 18:16:17 -0800 Subject: Input: usbtouchscreen - separate report and transmit buffer size handling This patch supports the separate handling of the USB transfer buffer length and the length of the buffer used for multi packet support. For devices supporting multiple report or diagnostic packets, the USB transfer size is now limited to the USB endpoints wMaxPacketSize - otherwise it defaults to the configured report packet size as before. This fixes an issue where event reporting can be delayed for an arbitrary time for multi packet devices. For instance the report size for eGalax devices is defined to the 16 byte maximum diagnostic packet size as opposed to the 5 byte report packet size. In case the driver requests 16 byte from the USB interrupt endpoint, the USB host controller driver needs to split up the request into 2 accesses according to the endpoints wMaxPacketSize of 8 byte. When the first transfer is answered by the eGalax device with not less than the full 8 byte requested, the host controller has got no way of knowing whether the touch controller has got additional data queued and will issue the second transfer. If per example a liftoff event finishes at such a wMaxPacketSize boundary, the data will not be available to the usbtouch driver until a further event is triggered and transfered to the host. From user perspective the BTN_TOUCH release event in this case is stuck until the next touch down event. Signed-off-by: Christian Engelmayer Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 721fdb3..819fb21 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -106,6 +106,7 @@ struct usbtouch_device_info { struct usbtouch_usb { unsigned char *data; dma_addr_t data_dma; + int data_size; unsigned char *buffer; int buf_len; struct urb *irq; @@ -1523,7 +1524,7 @@ static int usbtouch_reset_resume(struct usb_interface *intf) static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) { - usb_free_coherent(udev, usbtouch->type->rept_size, + usb_free_coherent(udev, usbtouch->data_size, usbtouch->data, usbtouch->data_dma); kfree(usbtouch->buffer); } @@ -1568,7 +1569,20 @@ static int usbtouch_probe(struct usb_interface *intf, if (!type->process_pkt) type->process_pkt = usbtouch_process_pkt; - usbtouch->data = usb_alloc_coherent(udev, type->rept_size, + usbtouch->data_size = type->rept_size; + if (type->get_pkt_len) { + /* + * When dealing with variable-length packets we should + * not request more than wMaxPacketSize bytes at once + * as we do not know if there is more data coming or + * we filled exactly wMaxPacketSize bytes and there is + * nothing else. + */ + usbtouch->data_size = min(usbtouch->data_size, + usb_endpoint_maxp(endpoint)); + } + + usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size, GFP_KERNEL, &usbtouch->data_dma); if (!usbtouch->data) goto out_free; @@ -1628,12 +1642,12 @@ static int usbtouch_probe(struct usb_interface *intf, if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) usb_fill_int_urb(usbtouch->irq, udev, usb_rcvintpipe(udev, endpoint->bEndpointAddress), - usbtouch->data, type->rept_size, + usbtouch->data, usbtouch->data_size, usbtouch_irq, usbtouch, endpoint->bInterval); else usb_fill_bulk_urb(usbtouch->irq, udev, usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), - usbtouch->data, type->rept_size, + usbtouch->data, usbtouch->data_size, usbtouch_irq, usbtouch); usbtouch->irq->dev = udev; -- cgit v0.10.2 From a9e51fe5e610dce8110ec383f50b96eeadd568e0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 1 Dec 2013 19:41:06 +0800 Subject: pinctrl: abx500: Fix header file include guard Fix a trivial typo. Signed-off-by: Axel Lin Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h index eeca8f9..8229380 100644 --- a/drivers/pinctrl/pinctrl-abx500.h +++ b/drivers/pinctrl/pinctrl-abx500.h @@ -1,4 +1,4 @@ -#ifndef PINCTRL_PINCTRL_ABx5O0_H +#ifndef PINCTRL_PINCTRL_ABx500_H #define PINCTRL_PINCTRL_ABx500_H /* Package definitions */ -- cgit v0.10.2 From d6437c14df89cb2df2bd9ef3692958d979b75d49 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Tue, 5 Nov 2013 12:13:54 +0000 Subject: ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation Originally snd_hrtimer_callback() used iprtd->period_time for some jiffies based estimation to determine the right moment to call snd_pcm_period_elapsed(). As timer drifts may well be a problem, this was changed in commit b4e82b5b785670b6 to be based on buffer transmission progress, using iprtd->offset and runtime->buffer_size to calculate the amount of data since last period had elapsed. Unfortunately, iprtd->offset counts in bytes, while runtime->buffer_size counts frames, so adding these to find some delta is like comparing apples and oranges, and eventually results in negative delta values every now and then. This is no big harm, because it simply causes snd_pcm_period_elapsed() being called more often than necessary, as negative delta is taken for a large unsigned value by implicit conversion rule. Nonetheless, the calculation is broken, so one would replace the runtime->buffer_size by its equivalent in bytes. But then, there are chances snd_pcm_period_elapsed() is called late, because calculating the moment for the elapsed period into delta is based against the iprtd->last_offset, which is not necessarily the first byte of the period in question, but some random byte which the FIQ handler left us with in r8/r9 by accident. Again, negative impact is low, as there are plenty of periods already prefilled with data, and snd_pcm_period_elapsed() will probably be called latest when the following period is reached. However, the calculation is conceptually broken, and we are best off removing the clever stuff altogether. snd_pcm_period_elapsed() is now simply called once everytime snd_hrtimer_callback() is run, which may not be most accurate, but at least this way we are quite sure we dont miss an end of period. There is not much extra effort wasted by superfluous calls to snd_pcm_period_elapsed(), as the timer frequency closely matches the period size anyway. Signed-off-by: Oskar Schirmer Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index 2fc872b..f53b326 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -39,8 +39,6 @@ struct imx_pcm_runtime_data { unsigned int period; int periods; unsigned long offset; - unsigned long last_offset; - unsigned long size; struct hrtimer hrt; int poll_time_ns; struct snd_pcm_substream *substream; @@ -55,7 +53,6 @@ static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt) struct snd_pcm_substream *substream = iprtd->substream; struct snd_pcm_runtime *runtime = substream->runtime; struct pt_regs regs; - unsigned long delta; if (!atomic_read(&iprtd->playing) && !atomic_read(&iprtd->capturing)) return HRTIMER_NORESTART; @@ -67,19 +64,7 @@ static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt) else iprtd->offset = regs.ARM_r9 & 0xffff; - /* How much data have we transferred since the last period report? */ - if (iprtd->offset >= iprtd->last_offset) - delta = iprtd->offset - iprtd->last_offset; - else - delta = runtime->buffer_size + iprtd->offset - - iprtd->last_offset; - - /* If we've transferred at least a period then report it and - * reset our poll time */ - if (delta >= iprtd->period) { - snd_pcm_period_elapsed(substream); - iprtd->last_offset = iprtd->offset; - } + snd_pcm_period_elapsed(substream); hrtimer_forward_now(hrt, ns_to_ktime(iprtd->poll_time_ns)); @@ -96,11 +81,9 @@ static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; - iprtd->size = params_buffer_bytes(params); iprtd->periods = params_periods(params); - iprtd->period = params_period_bytes(params) ; + iprtd->period = params_period_bytes(params); iprtd->offset = 0; - iprtd->last_offset = 0; iprtd->poll_time_ns = 1000000000 / params_rate(params) * params_period_size(params); snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); -- cgit v0.10.2 From 23d8bb3bb65e3587ceff54e1b54dda3c48a14f28 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 8 Nov 2013 00:55:00 -0200 Subject: ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable Commit 68f9672b (ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation) introduced the following build warning: sound/soc/fsl/imx-pcm-fiq.c:53:26: warning: unused variable 'runtime' [-Wunused-variable] Remove the unused 'runtime' variable. Signed-off-by: Fabio Estevam Acked-by: Oskar Schirmer Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index f53b326..f00b512 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -51,7 +51,6 @@ static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt) struct imx_pcm_runtime_data *iprtd = container_of(hrt, struct imx_pcm_runtime_data, hrt); struct snd_pcm_substream *substream = iprtd->substream; - struct snd_pcm_runtime *runtime = substream->runtime; struct pt_regs regs; if (!atomic_read(&iprtd->playing) && !atomic_read(&iprtd->capturing)) -- cgit v0.10.2 From 6c7ef410c986db7e57b83231427e4606a225606b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 9 Nov 2013 08:41:14 +0800 Subject: ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe() platform_set_drvdata(op, pdata) in pcm030_fabric_probe() will be overwrited when calling snd_soc_register_card(card), but cm030_fabric_remove() use drvdata as a type of struct pcm030_audio_data, so we should move platform_set_drvdata() below snd_soc_register_card() call. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c index eb43738..3665f61 100644 --- a/sound/soc/fsl/pcm030-audio-fabric.c +++ b/sound/soc/fsl/pcm030-audio-fabric.c @@ -69,7 +69,6 @@ static int pcm030_fabric_probe(struct platform_device *op) return -ENOMEM; card->dev = &op->dev; - platform_set_drvdata(op, pdata); pdata->card = card; @@ -98,6 +97,8 @@ static int pcm030_fabric_probe(struct platform_device *op) if (ret) dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret); + platform_set_drvdata(op, pdata); + return ret; } -- cgit v0.10.2 From fb28a75ad4806e17512025e03ec7c8255d055478 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Sat, 30 Nov 2013 18:05:28 +0200 Subject: ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepare N810 audio driver has stopped working at some point. Probably when OMAP2 was converted to common clock framework since now call to clk_enable dumps the stack trace in drivers/clk/clk.c: __clk_enable() due clk->prepare_count is zero. Fix this by converting clk_enable/_disable calls to those that take care of clock prepare/unprepare. I'm not queueing this to linux-stable since OMAP2 common clock framework conversion in commit ed1ebc4948fd ("ARM: OMAP2: clock: Convert to common clk") happened before N810 was really usable in mainline and user base for N810 is anyway small. Potential linux-stable candidates are only those after commit 3d3a6d18abc6 ("watchdog: introduce retu_wdt driver"). Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 6d216cb..3fde9e4 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -100,12 +100,12 @@ static int n810_startup(struct snd_pcm_substream *substream) SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2); n810_ext_control(&codec->dapm); - return clk_enable(sys_clkout2); + return clk_prepare_enable(sys_clkout2); } static void n810_shutdown(struct snd_pcm_substream *substream) { - clk_disable(sys_clkout2); + clk_disable_unprepare(sys_clkout2); } static int n810_hw_params(struct snd_pcm_substream *substream, -- cgit v0.10.2 From 2480f57fb3023eb047c5f2d6dfefef41ab9b893c Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 2 Dec 2013 11:24:18 +0000 Subject: KEYS: Pre-clear struct key on allocation The second word of key->payload does not get initialised in key_alloc(), but the big_key type is relying on it having been cleared. The problem comes when big_key fails to instantiate a large key and doesn't then set the payload. The big_key_destroy() op is called from the garbage collector and this assumes that the dentry pointer stored in the second word will be NULL if instantiation did not complete. Therefore just pre-clear the entire struct key on allocation rather than trying to be clever and only initialising to 0 only those bits that aren't otherwise initialised. The lack of initialisation can lead to a bug report like the following if big_key failed to initialise its file: general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 0 PID: 51 Comm: kworker/0:1 Not tainted 3.10.0-53.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge 1955/0HC513, BIOS 1.4.4 12/09/2008 Workqueue: events key_garbage_collector task: ffff8801294f5680 ti: ffff8801296e2000 task.ti: ffff8801296e2000 RIP: 0010:[] dput+0x21/0x2d0 ... Call Trace: [] path_put+0x16/0x30 [] big_key_destroy+0x44/0x60 [] key_gc_unused_keys.constprop.2+0x5b/0xe0 [] key_garbage_collector+0x1df/0x3c0 [] process_one_work+0x17b/0x460 [] worker_thread+0x11b/0x400 [] ? rescuer_thread+0x3e0/0x3e0 [] kthread+0xc0/0xd0 [] ? kthread_create_on_node+0x110/0x110 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x110/0x110 Reported-by: Patrik Kis Signed-off-by: David Howells Reviewed-by: Stephen Gallagher diff --git a/security/keys/key.c b/security/keys/key.c index 55d110f..6e21c11 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -272,7 +272,7 @@ struct key *key_alloc(struct key_type *type, const char *desc, } /* allocate and initialise the key and its description */ - key = kmem_cache_alloc(key_jar, GFP_KERNEL); + key = kmem_cache_zalloc(key_jar, GFP_KERNEL); if (!key) goto no_memory_2; @@ -293,18 +293,12 @@ struct key *key_alloc(struct key_type *type, const char *desc, key->uid = uid; key->gid = gid; key->perm = perm; - key->flags = 0; - key->expiry = 0; - key->payload.data = NULL; - key->security = NULL; if (!(flags & KEY_ALLOC_NOT_IN_QUOTA)) key->flags |= 1 << KEY_FLAG_IN_QUOTA; if (flags & KEY_ALLOC_TRUSTED) key->flags |= 1 << KEY_FLAG_TRUSTED; - memset(&key->type_data, 0, sizeof(key->type_data)); - #ifdef KEY_DEBUGGING key->magic = KEY_DEBUG_MAGIC; #endif -- cgit v0.10.2 From d54e58b7f01552b0eb7d445f4b58de4499ad5ea6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 2 Dec 2013 11:24:18 +0000 Subject: KEYS: Fix the keyring hash function The keyring hash function (used by the associative array) is supposed to clear the bottommost nibble of the index key (where the hash value resides) for keyrings and make sure it is non-zero for non-keyrings. This is done to make keyrings cluster together on one branch of the tree separately to other keys. Unfortunately, the wrong mask is used, so only the bottom two bits are examined and cleared and not the whole bottom nibble. This means that keys and keyrings can still be successfully searched for under most circumstances as the hash is consistent in its miscalculation, but if a keyring's associative array bottom node gets filled up then approx 75% of the keyrings will not be put into the 0 branch. The consequence of this is that a key in a keyring linked to by another keyring, ie. keyring A -> keyring B -> key may not be found if the search starts at keyring A and then descends into keyring B because search_nested_keyrings() only searches up the 0 branch (as it "knows" all keyrings must be there and not elsewhere in the tree). The fix is to use the right mask. This can be tested with: r=`keyctl newring sandbox @s` for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done This creates a sandbox keyring, then creates 17 keyrings therein (labelled ring0..ring16). This causes the root node of the sandbox's associative array to overflow and for the tree to have extra nodes inserted. Each keyring then is given a user key (labelled aN for ringN) for us to search for. We then search for the user keys we added, starting from the sandbox. If working correctly, it should return the same ordered list of key IDs as for...keyctl add... did. Without this patch, it reports ENOKEY "Required key not available" for some of the keys. Just which keys get this depends as the kernel pointer to the key type forms part of the hash function. Reported-by: Nalin Dahyabhai Signed-off-by: David Howells Tested-by: Stephen Gallagher diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 69f0cb7..0adbc77 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -160,7 +160,7 @@ static u64 mult_64x32_and_fold(u64 x, u32 y) static unsigned long hash_key_type_and_desc(const struct keyring_index_key *index_key) { const unsigned level_shift = ASSOC_ARRAY_LEVEL_STEP; - const unsigned long level_mask = ASSOC_ARRAY_LEVEL_STEP_MASK; + const unsigned long fan_mask = ASSOC_ARRAY_FAN_MASK; const char *description = index_key->description; unsigned long hash, type; u32 piece; @@ -194,10 +194,10 @@ static unsigned long hash_key_type_and_desc(const struct keyring_index_key *inde * ordinary keys by making sure the lowest level segment in the hash is * zero for keyrings and non-zero otherwise. */ - if (index_key->type != &key_type_keyring && (hash & level_mask) == 0) + if (index_key->type != &key_type_keyring && (hash & fan_mask) == 0) return hash | (hash >> (ASSOC_ARRAY_KEY_CHUNK_SIZE - level_shift)) | 1; - if (index_key->type == &key_type_keyring && (hash & level_mask) != 0) - return (hash + (hash << level_shift)) & ~level_mask; + if (index_key->type == &key_type_keyring && (hash & fan_mask) != 0) + return (hash + (hash << level_shift)) & ~fan_mask; return hash; } -- cgit v0.10.2 From 23fd78d76415729b338ff1802a0066b4a62f7fb8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 2 Dec 2013 11:24:18 +0000 Subject: KEYS: Fix multiple key add into associative array If sufficient keys (or keyrings) are added into a keyring such that a node in the associative array's tree overflows (each node has a capacity N, currently 16) and such that all N+1 keys have the same index key segment for that level of the tree (the level'th nibble of the index key), then assoc_array_insert() calls ops->diff_objects() to indicate at which bit position the two index keys vary. However, __key_link_begin() passes a NULL object to assoc_array_insert() with the intention of supplying the correct pointer later before we commit the change. This means that keyring_diff_objects() is given a NULL pointer as one of its arguments which it does not expect. This results in an oops like the attached. With the previous patch to fix the keyring hash function, this can be forced much more easily by creating a keyring and only adding keyrings to it. Add any other sort of key and a different insertion path is taken - all 16+1 objects must want to cluster in the same node slot. This can be tested by: r=`keyctl newring sandbox @s` for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done This should work fine, but oopses when the 17th keyring is added. Since ops->diff_objects() is always called with the first pointer pointing to the object to be inserted (ie. the NULL pointer), we can fix the problem by changing the to-be-inserted object pointer to point to the index key passed into assoc_array_insert() instead. Whilst we're at it, we also switch the arguments so that they are the same as for ->compare_object(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [] hash_key_type_and_desc+0x18/0xb0 ... RIP: 0010:[] hash_key_type_and_desc+0x18/0xb0 ... Call Trace: [] keyring_diff_objects+0x21/0xd2 [] assoc_array_insert+0x3b6/0x908 [] __key_link_begin+0x78/0xe5 [] key_create_or_update+0x17d/0x36a [] SyS_add_key+0x123/0x183 [] tracesys+0xdd/0xe2 Signed-off-by: David Howells Tested-by: Stephen Gallagher diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt index f4faec0..2f2c6cd 100644 --- a/Documentation/assoc_array.txt +++ b/Documentation/assoc_array.txt @@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided: (4) Diff the index keys of two objects. - int (*diff_objects)(const void *a, const void *b); + int (*diff_objects)(const void *object, const void *index_key); - Return the bit position at which the index keys of two objects differ or - -1 if they are the same. + Return the bit position at which the index key of the specified object + differs from the given index key or -1 if they are the same. (5) Free an object. diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h index 9a193b8..a89df3b 100644 --- a/include/linux/assoc_array.h +++ b/include/linux/assoc_array.h @@ -41,10 +41,10 @@ struct assoc_array_ops { /* Is this the object we're looking for? */ bool (*compare_object)(const void *object, const void *index_key); - /* How different are two objects, to a bit position in their keys? (or - * -1 if they're the same) + /* How different is an object from an index key, to a bit position in + * their keys? (or -1 if they're the same) */ - int (*diff_objects)(const void *a, const void *b); + int (*diff_objects)(const void *object, const void *index_key); /* Method to free an object. */ void (*free_object)(void *object); diff --git a/lib/assoc_array.c b/lib/assoc_array.c index 17edeaf..1b6a44f 100644 --- a/lib/assoc_array.c +++ b/lib/assoc_array.c @@ -759,8 +759,8 @@ all_leaves_cluster_together: pr_devel("all leaves cluster together\n"); diff = INT_MAX; for (i = 0; i < ASSOC_ARRAY_FAN_OUT; i++) { - int x = ops->diff_objects(assoc_array_ptr_to_leaf(edit->leaf), - assoc_array_ptr_to_leaf(node->slots[i])); + int x = ops->diff_objects(assoc_array_ptr_to_leaf(node->slots[i]), + index_key); if (x < diff) { BUG_ON(x < 0); diff = x; diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 0adbc77..3dd8445 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -279,12 +279,11 @@ static bool keyring_compare_object(const void *object, const void *data) * Compare the index keys of a pair of objects and determine the bit position * at which they differ - if they differ. */ -static int keyring_diff_objects(const void *_a, const void *_b) +static int keyring_diff_objects(const void *object, const void *data) { - const struct key *key_a = keyring_ptr_to_key(_a); - const struct key *key_b = keyring_ptr_to_key(_b); + const struct key *key_a = keyring_ptr_to_key(object); const struct keyring_index_key *a = &key_a->index_key; - const struct keyring_index_key *b = &key_b->index_key; + const struct keyring_index_key *b = data; unsigned long seg_a, seg_b; int level, i; -- cgit v0.10.2 From 9c5e45df215b4788f7a41c983ce862d08a083c2d Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 2 Dec 2013 11:24:19 +0000 Subject: KEYS: Fix searching of nested keyrings If a keyring contains more than 16 keyrings (the capacity of a single node in the associative array) then those keyrings are split over multiple nodes arranged as a tree. If search_nested_keyrings() is called to search the keyring then it will attempt to manually walk over just the 0 branch of the associative array tree where all the keyring links are stored. This works provided the key is found before the algorithm steps from one node containing keyrings to a child node or if there are sufficiently few keyring links that the keyrings are all in one node. However, if the algorithm does need to step from a node to a child node, it doesn't change the node pointer unless a shortcut also gets transited. This means that the algorithm will keep scanning the same node over and over again without terminating and without returning. To fix this, move the internal-pointer-to-node translation from inside the shortcut transit handler so that it applies it to node arrival as well. This can be tested by: r=`keyctl newring sandbox @s` for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done for ((i=17; i<=20; i++)); do keyctl search $r user a$i; done The searches should all complete successfully (or with an error for 17-20), but instead one or more of them will hang. Signed-off-by: David Howells Tested-by: Stephen Gallagher diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 3dd8445..d46cbc5 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -690,8 +690,8 @@ descend_to_node: smp_read_barrier_depends(); ptr = ACCESS_ONCE(shortcut->next_node); BUG_ON(!assoc_array_ptr_is_node(ptr)); - node = assoc_array_ptr_to_node(ptr); } + node = assoc_array_ptr_to_node(ptr); begin_node: kdebug("begin_node"); -- cgit v0.10.2 From c7277090927a5e71871e799a355ed2940f6c8fc6 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 2 Dec 2013 11:24:19 +0000 Subject: security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris Signed-off-by: David Howells cc: Hugh Dickins cc: linux-mm@kvack.org diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index 30aa0dc..9d55438 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -47,6 +47,8 @@ extern int shmem_init(void); extern int shmem_fill_super(struct super_block *sb, void *data, int silent); extern struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); +extern struct file *shmem_kernel_file_setup(const char *name, loff_t size, + unsigned long flags); extern int shmem_zero_setup(struct vm_area_struct *); extern int shmem_lock(struct file *file, int lock, struct user_struct *user); extern void shmem_unlock_mapping(struct address_space *mapping); diff --git a/mm/shmem.c b/mm/shmem.c index 8297623..902a148 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2918,13 +2918,8 @@ static struct dentry_operations anon_ops = { .d_dname = simple_dname }; -/** - * shmem_file_setup - get an unlinked file living in tmpfs - * @name: name for dentry (to be seen in /proc//maps - * @size: size to be set for the file - * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size - */ -struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags) +static struct file *__shmem_file_setup(const char *name, loff_t size, + unsigned long flags, unsigned int i_flags) { struct file *res; struct inode *inode; @@ -2957,6 +2952,7 @@ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags if (!inode) goto put_dentry; + inode->i_flags |= i_flags; d_instantiate(path.dentry, inode); inode->i_size = size; clear_nlink(inode); /* It is unlinked */ @@ -2977,6 +2973,32 @@ put_memory: shmem_unacct_size(flags, size); return res; } + +/** + * shmem_kernel_file_setup - get an unlinked file living in tmpfs which must be + * kernel internal. There will be NO LSM permission checks against the + * underlying inode. So users of this interface must do LSM checks at a + * higher layer. The one user is the big_key implementation. LSM checks + * are provided at the key level rather than the inode level. + * @name: name for dentry (to be seen in /proc//maps + * @size: size to be set for the file + * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size + */ +struct file *shmem_kernel_file_setup(const char *name, loff_t size, unsigned long flags) +{ + return __shmem_file_setup(name, size, flags, S_PRIVATE); +} + +/** + * shmem_file_setup - get an unlinked file living in tmpfs + * @name: name for dentry (to be seen in /proc//maps + * @size: size to be set for the file + * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size + */ +struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags) +{ + return __shmem_file_setup(name, size, flags, 0); +} EXPORT_SYMBOL_GPL(shmem_file_setup); /** diff --git a/security/keys/big_key.c b/security/keys/big_key.c index 7f44c32..8137b27 100644 --- a/security/keys/big_key.c +++ b/security/keys/big_key.c @@ -70,7 +70,7 @@ int big_key_instantiate(struct key *key, struct key_preparsed_payload *prep) * * TODO: Encrypt the stored data with a temporary key. */ - file = shmem_file_setup("", datalen, 0); + file = shmem_kernel_file_setup("", datalen, 0); if (IS_ERR(file)) { ret = PTR_ERR(file); goto err_quota; -- cgit v0.10.2 From ebff65473f56e6c30de928fd6a4f1ce5ae36e8c5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 2 Dec 2013 13:26:50 +0800 Subject: ASoC: core: fix devres parameter in devm_snd_soc_register_card() Since devm_card_release() expects parameter 'res' to be a pointer to struct snd_soc_card, devm_snd_soc_register_card() should really pass such a pointer rather than the one to struct device. This bug causes the kernel Oops below with imx-sgtl500 driver when we remove the module. It happens because with 'card' pointing to the wrong structure, card->num_rtd becomes 0 in function soc_remove_dai_links(). Consequently, soc_remove_link_components() and in turn soc_cleanup_codec[platform]_debugfs() will not be called on card removal. It results in that debugfs_card_root is being removed while its child entries debugfs_codec_root and debugfs_platform_root are still there, and thus the kernel Oops. Fix the bug by correcting the parameter 'res' to be the pointer to struct snd_soc_card. $ lsmod Module Size Used by snd_soc_imx_sgtl5000 3506 0 snd_soc_sgtl5000 13677 2 snd_soc_imx_audmux 5324 1 snd_soc_imx_sgtl5000 snd_soc_fsl_ssi 8139 2 imx_pcm_dma 1380 1 snd_soc_fsl_ssi $ rmmod snd_soc_imx_sgtl5000 Unable to handle kernel paging request at virtual address e594025c pgd = be134000 [e594025c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_imx_sgtl5000(-) snd_soc_sgtl5000 snd_soc_imx_audmux snd_soc_fsl_ssi imx_pcm_dma CPU: 0 PID: 1793 Comm: rmmod Not tainted 3.13.0-rc1 #1570 task: bee28900 ti: bfbec000 task.ti: bfbec000 PC is at debugfs_remove_recursive+0x28/0x154 LR is at snd_soc_unregister_card+0xa0/0xcc pc : [<80252b38>] lr : [<80496ac4>] psr: a0000013 sp : bfbede00 ip : bfbede28 fp : bfbede24 r10: 803281d4 r9 : bfbec000 r8 : 803271ac r7 : bef54440 r6 : 00000004 r5 : bf9a4010 r4 : bf9a4010 r3 : e5940224 r2 : 00000000 r1 : bef54450 r0 : 803271ac Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4e13404a DAC: 00000015 Process rmmod (pid: 1793, stack limit = 0xbfbec240) Stack: (0xbfbede00 to 0xbfbee000) de00: 00000000 bf9a4010 bf9a4010 00000004 bef54440 bec89000 bfbede44 bfbede28 de20: 80496ac4 80252b1c 804a4b60 bfbede60 bf9a4010 00000004 bfbede54 bfbede48 de40: 804a4b74 80496a30 bfbede94 bfbede58 80328728 804a4b6c bfbede94 a0000013 de60: bf1b5800 bef54440 00000002 bf9a4010 7f0169f8 bf9a4044 00000081 8000e9c4 de80: bfbec000 00000000 bfbedeac bfbede98 80328cb0 80328618 7f016000 bf9a4010 dea0: bfbedec4 bfbedeb0 8032561c 80328c84 bf9a4010 7f0169f8 bfbedee4 bfbedec8 dec0: 80325e84 803255a8 bee28900 7f0169f8 00000000 78208d30 bfbedefc bfbedee8 dee0: 80325410 80325dd4 beca8100 7f0169f8 bfbedf14 bfbedf00 803264f8 803253c8 df00: 7f01635c 7f016a3c bfbedf24 bfbedf18 80327098 803264d4 bfbedf34 bfbedf28 df20: 7f016370 80327090 bfbedfa4 bfbedf38 80085ef0 7f016368 bfbedf54 5f646e73 df40: 5f636f73 5f786d69 6c746773 30303035 00000000 78208008 bfbedf84 bfbedf68 df60: 800613b0 80061194 fffffffe 78208d00 7efc2f07 00000081 7f016a3c 00000800 df80: bfbedf84 00000000 00000000 fffffffe 78208d00 7efc2f07 00000000 bfbedfa8 dfa0: 8000e800 80085dcc fffffffe 78208d00 78208d30 00000800 a8c82400 a8c82400 dfc0: fffffffe 78208d00 7efc2f07 00000081 00000002 00000000 78208008 00000800 dfe0: 7efc2e1c 7efc2ba8 76f5ca47 76edec7c 80000010 78208d30 00000000 00000000 Backtrace: [<80252b10>] (debugfs_remove_recursive+0x0/0x154) from [<80496ac4>] (snd_soc_unregister_card+0xa0/0xcc) r8:bec89000 r7:bef54440 r6:00000004 r5:bf9a4010 r4:bf9a4010 r3:00000000 [<80496a24>] (snd_soc_unregister_card+0x0/0xcc) from [<804a4b74>] (devm_card_release+0x14/0x18) r6:00000004 r5:bf9a4010 r4:bfbede60 r3:804a4b60 [<804a4b60>] (devm_card_release+0x0/0x18) from [<80328728>] (release_nodes+0x11c/0x1dc) [<8032860c>] (release_nodes+0x0/0x1dc) from [<80328cb0>] (devres_release_all+0x38/0x54) [<80328c78>] (devres_release_all+0x0/0x54) from [<8032561c>] (__device_release_driver+0x80/0xd4) r4:bf9a4010 r3:7f016000 [<8032559c>] (__device_release_driver+0x0/0xd4) from [<80325e84>] (driver_detach+0xbc/0xc0) r5:7f0169f8 r4:bf9a4010 [<80325dc8>] (driver_detach+0x0/0xc0) from [<80325410>] (bus_remove_driver+0x54/0x98) r6:78208d30 r5:00000000 r4:7f0169f8 r3:bee28900 [<803253bc>] (bus_remove_driver+0x0/0x98) from [<803264f8>] (driver_unregister+0x30/0x50) r4:7f0169f8 r3:beca8100 [<803264c8>] (driver_unregister+0x0/0x50) from [<80327098>] (platform_driver_unregister+0x14/0x18) r4:7f016a3c r3:7f01635c [<80327084>] (platform_driver_unregister+0x0/0x18) from [<7f016370>] (imx_sgtl5000_driver_exit+0x14/0x1c [snd_soc_imx_sgtl5000]) [<7f01635c>] (imx_sgtl5000_driver_exit+0x0/0x1c [snd_soc_imx_sgtl5000]) from [<80085ef0>] (SyS_delete_module+0x130/0x18c) [<80085dc0>] (SyS_delete_module+0x0/0x18c) from [<8000e800>] (ret_fast_syscall+0x0/0x48) r6:7efc2f07 r5:78208d00 r4:fffffffe Code: 889da9f8 e5983020 e3530000 089da9f8 (e5933038) ---[ end trace 825e7e125251a225 ]--- Signed-off-by: Shawn Guo Signed-off-by: Mark Brown diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c index b1d7322..3449c1e 100644 --- a/sound/soc/soc-devres.c +++ b/sound/soc/soc-devres.c @@ -66,7 +66,7 @@ static void devm_card_release(struct device *dev, void *res) */ int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card) { - struct device **ptr; + struct snd_soc_card **ptr; int ret; ptr = devres_alloc(devm_card_release, sizeof(*ptr), GFP_KERNEL); @@ -75,7 +75,7 @@ int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card) ret = snd_soc_register_card(card); if (ret == 0) { - *ptr = dev; + *ptr = card; devres_add(dev, ptr); } else { devres_free(ptr); -- cgit v0.10.2 From 1cd9b2f78bf29d5282e02b32f9b3ecebc5842a7c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 13:19:45 +0100 Subject: ALSA: hda - Fix bad EAPD setup for HP machines with AD1984A It seems that EAPD on NID 0x16 is the only control over all outputs on HP machines with AD1984A while turning EAPD on NID 0x12 breaks the output. Thus we need to avoid fiddling EAPD on NID. As a quick workaround, just set own_eapd_ctrl flag for the wrong EAPD, then implement finer EAPD controls. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66321 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 1a83559..34d86ec 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -962,6 +962,7 @@ static void ad1884_fixup_hp_eapd(struct hda_codec *codec, switch (action) { case HDA_FIXUP_ACT_PRE_PROBE: spec->gen.vmaster_mute.hook = ad1884_vmaster_hp_gpio_hook; + spec->gen.own_eapd_ctl = 1; snd_hda_sequence_write_cache(codec, gpio_init_verbs); break; case HDA_FIXUP_ACT_PROBE: -- cgit v0.10.2 From 88d071fc9a93de2916822910c927f28ed15c3a56 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 11:12:28 +0100 Subject: ALSA: hda - Fix complete_all() timing in deferred probes When the probe of snd-hda-intel driver is deferred due to f/w loading or the nested module loading, complete_all() should be also delayed until the initialization really finished. Otherwise, vga-switcheroo client would start switching before the actual init is done. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c6d2301..27aa140 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -3876,7 +3876,8 @@ static int azx_probe(struct pci_dev *pci, } dev++; - complete_all(&chip->probe_wait); + if (chip->disabled) + complete_all(&chip->probe_wait); return 0; out_free: @@ -3953,10 +3954,10 @@ static int azx_probe_continue(struct azx *chip) if ((chip->driver_caps & AZX_DCAPS_PM_RUNTIME) || chip->use_vga_switcheroo) pm_runtime_put_noidle(&pci->dev); - return 0; - out_free: - chip->init_failed = 1; + if (err < 0) + chip->init_failed = 1; + complete_all(&chip->probe_wait); return err; } -- cgit v0.10.2 From 58e7b1d5826ac6a64b1101d8a70162bc084a7d1e Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 22 Nov 2013 17:08:43 +0100 Subject: ARM: at91: sama5d3: reduce TWI internal clock frequency With some devices, transfer hangs during I2C frame transmission. This issue disappears when reducing the internal frequency of the TWI IP. Even if it is indicated that internal clock max frequency is 66MHz, it seems we have oversampling on I2C signals making TWI believe that a transfer in progress is done. This fix has no impact on the I2C bus frequency. Cc: #3.10+ Signed-off-by: Ludovic Desroches Acked-by: Wolfram Sang Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea8642..a28873f 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", -- cgit v0.10.2 From d2607c3b78701fed52ba1bb953562da6702b2001 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 2 Dec 2013 10:58:32 +0100 Subject: ARM: at91: add usart3 alias to dtsi Alias was missing for SoC of the at91sam9x5 familly that embed USART3. Reported-by: Jiri Prchal [b.brezillon@overkiz.com: advised to place changes in at91sam9x5_usart3.dtsi] Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e95..6801106 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { -- cgit v0.10.2 From 7093bf2b7195541281cb711e31c027a8d826c6df Mon Sep 17 00:00:00 2001 From: Brent Taylor Date: Sun, 24 Nov 2013 12:02:35 -0600 Subject: ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM If CONFIG_PM is not defined, then arch/arm/mach-at91/pm.c is not compiled in. This patch creates an inline function that does nothing if CONFIG_PM is not defined. Signed-off-by: Brent Taylor Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190c..c5101dc 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include #include +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will -- cgit v0.10.2 From b8654b3753f8b79fc57dbd6a8a633d88274836a6 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 19 Sep 2013 10:39:44 +0530 Subject: drm/exynos: Fix trivial typo in exynos_drm_fimd.c Fixed a trivial typo. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 23da72b..a61878b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -31,7 +31,7 @@ #include "exynos_drm_iommu.h" /* - * FIMD is stand for Fully Interactive Mobile Display and + * FIMD stands for Fully Interactive Mobile Display and * as a display controller, it transfers contents drawn on memory * to a LCD Panel through Display Interfaces such as RGB or * CPU Interface. -- cgit v0.10.2 From 0cbc330e12835fcbac44e33d5632d805b16635f2 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 1 Oct 2013 14:51:37 +0900 Subject: drm/exynos: release unhandled page flip events at postclose. This patch resolves a dead lock issue that could be incurred when exynos_drm_crtc_dpms function was called. The exynos_drm_crtc_dpms function waits for the completion of pended page flip events. However, preclose callback - this releases all unhandled page flip events - is called prior to the exynos_drm_crtc_dpms function call when drm is closed. So at this time, this will make the exynos_drm_crtc_dpms to wait infiniately for the completion of the page flip events. This patch releases the unhandled page flip events at postclose instead of preclose so that exynos_drm_crtc_dpms function can be waked up. Changelog v2: - fix a memory leak when drm is closed. . it has a memory leak when a requeste page flip is handled after drm_events_release() is called and before drm_fb_release() is called. At this time, a drm_pending_event will not be freed. So also this chage releases the drm_pending_event at postclose(). And it calls drm_vblank_put() for pair if there is any unhandled page flip event. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index b676006..22b8f5e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -173,28 +173,37 @@ static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) static void exynos_drm_preclose(struct drm_device *dev, struct drm_file *file) { + exynos_drm_subdrv_close(dev, file); +} + +static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file) +{ struct exynos_drm_private *private = dev->dev_private; - struct drm_pending_vblank_event *e, *t; + struct drm_pending_vblank_event *v, *vt; + struct drm_pending_event *e, *et; unsigned long flags; - /* release events of current file */ + if (!file->driver_priv) + return; + + /* Release all events not unhandled by page flip handler. */ spin_lock_irqsave(&dev->event_lock, flags); - list_for_each_entry_safe(e, t, &private->pageflip_event_list, + list_for_each_entry_safe(v, vt, &private->pageflip_event_list, base.link) { - if (e->base.file_priv == file) { - list_del(&e->base.link); - e->base.destroy(&e->base); + if (v->base.file_priv == file) { + list_del(&v->base.link); + drm_vblank_put(dev, v->pipe); + v->base.destroy(&v->base); } } - spin_unlock_irqrestore(&dev->event_lock, flags); - exynos_drm_subdrv_close(dev, file); -} + /* Release all events handled by page flip handler but not freed. */ + list_for_each_entry_safe(e, et, &file->event_list, link) { + list_del(&e->link); + e->destroy(e); + } + spin_unlock_irqrestore(&dev->event_lock, flags); -static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file) -{ - if (!file->driver_priv) - return; kfree(file->driver_priv); file->driver_priv = NULL; -- cgit v0.10.2 From e4de211cd31665c167351a428e08199ee6355e46 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 15:07:59 +0100 Subject: ALSA: atmel: Fix possible array overflow The static checker found a possible array overflow in atmel/abdac.c: static checker warning: "sound/atmel/abdac.c:373 set_sample_rates() error: buffer overflow 'dac->rates' 6 <= 6" This patch papers over the buggy point, by ensuring that dac->rates[] update not overflowing the actual array size. Reported-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index 872d59e..721d8fd 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -357,7 +357,8 @@ static int set_sample_rates(struct atmel_abdac *dac) if (new_rate < 0) break; /* make sure we are below the ABDAC clock */ - if (new_rate <= clk_get_rate(dac->pclk)) { + if (index < MAX_NUM_RATES && + new_rate <= clk_get_rate(dac->pclk)) { dac->rates[index] = new_rate / 256; index++; } -- cgit v0.10.2 From 0a5f99cfff2297f6c350b7f54878cbbf1b1253d5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 30 Nov 2013 19:12:27 +0000 Subject: HID: kye: Fix missing break in kye_report_fixup() The change to support Genius Manticore Keyboard also changed behaviour for Genius Gx Imperator Keyboard, as there is no break between the cases. This is presumably a mistake. Reported by Coverity as CID 1134029. Fixes: 4a2c94c9b6c0 ('HID: kye: Add report fixup for Genius Manticore Keyboard') Signed-off-by: Ben Hutchings Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index ecb5ca6..e776963 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -341,6 +341,7 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, case USB_DEVICE_ID_GENIUS_GX_IMPERATOR: rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83, "Genius Gx Imperator Keyboard"); + break; case USB_DEVICE_ID_GENIUS_MANTICORE: rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104, "Genius Manticore Keyboard"); -- cgit v0.10.2 From e7ca237bfcf6a288702cb95e94ab94f642ccad88 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 15:27:19 +0100 Subject: ALSA: hda - Another fixup for ASUS laptop with ALC660 codec ASUS Z35HL laptop also needs the very same fix as the previous one that was applied to ASUS W7J. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66231 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a98f329..9ca8300 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4559,6 +4559,7 @@ static const struct hda_fixup alc861_fixups[] = { static const struct snd_pci_quirk alc861_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1253, "ASUS W7J", ALC660_FIXUP_ASUS_W7J), + SND_PCI_QUIRK(0x1043, 0x1263, "ASUS Z35HL", ALC660_FIXUP_ASUS_W7J), SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP), SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F), SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT), -- cgit v0.10.2 From b2b0154e49e2b9470ae0d082128b5549cbe71152 Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Fri, 29 Nov 2013 15:37:20 +0100 Subject: s390/dasd: fix memory leak caused by dangling references to request_queue After the call to del_gendisk, the gendisk still holds a reference to its request_queue. We must not modify the gendisks queue pointer before the put_disk call, or the gendisk_release function cannot release the reference and the memory for the request_queue structure is lost. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c index f649217..f224d59 100644 --- a/drivers/s390/block/dasd_genhd.c +++ b/drivers/s390/block/dasd_genhd.c @@ -87,7 +87,6 @@ void dasd_gendisk_free(struct dasd_block *block) { if (block->gdp) { del_gendisk(block->gdp); - block->gdp->queue = NULL; block->gdp->private_data = NULL; put_disk(block->gdp); block->gdp = NULL; -- cgit v0.10.2 From 9e3ea19e35635ecd8373fc04f5dfb072be5f6d2c Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Fri, 29 Nov 2013 17:29:20 +0100 Subject: s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early Commit "s390/sclp: Consolidate early sclp init calls to sclp_early_detect()" (7b50da53f6ad2048241bef232bfc22a132a40283) replaced the sclp_event_mask_early() with sclp_set_event_mask(). The early_event_mask_sccb variable is no longer initialized but is still used in sclp_has_linemode() and sclp_has_vt220(). Replace early_event_mask_sccb with the sccb_early variable in both functions. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_early.c b/drivers/s390/char/sclp_early.c index f7aa080..1465e95 100644 --- a/drivers/s390/char/sclp_early.c +++ b/drivers/s390/char/sclp_early.c @@ -35,7 +35,6 @@ struct read_info_sccb { u8 _reserved5[4096 - 112]; /* 112-4095 */ } __packed __aligned(PAGE_SIZE); -static __initdata struct init_sccb early_event_mask_sccb __aligned(PAGE_SIZE); static __initdata struct read_info_sccb early_read_info_sccb; static __initdata char sccb_early[PAGE_SIZE] __aligned(PAGE_SIZE); static unsigned long sclp_hsa_size; @@ -113,7 +112,7 @@ static void __init sclp_facilities_detect(void) bool __init sclp_has_linemode(void) { - struct init_sccb *sccb = &early_event_mask_sccb; + struct init_sccb *sccb = (void *) &sccb_early; if (sccb->header.response_code != 0x20) return 0; @@ -126,7 +125,7 @@ bool __init sclp_has_linemode(void) bool __init sclp_has_vt220(void) { - struct init_sccb *sccb = &early_event_mask_sccb; + struct init_sccb *sccb = (void *) &sccb_early; if (sccb->header.response_code != 0x20) return 0; -- cgit v0.10.2 From 9c0952344d732ec47d05653d471c720bce112fcd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 30 Nov 2013 12:00:28 +0100 Subject: s390/smp,sclp: fix size of sclp_cpu_info structure struct sclp_cpu_info contains entries only for 255 cpus, while the new smp fallback sigp detection code will fill up to 256 entries. Even though there is no machine available which has 256 cpus and where in addition the fallback sigp cpu detection code will be used we better fix this, to prevent out of bound accesses. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h index 30ef748..2f39095 100644 --- a/arch/s390/include/asm/sclp.h +++ b/arch/s390/include/asm/sclp.h @@ -8,6 +8,7 @@ #include #include +#include #define SCLP_CHP_INFO_MASK_SIZE 32 @@ -37,7 +38,7 @@ struct sclp_cpu_info { unsigned int standby; unsigned int combined; int has_cpu_type; - struct sclp_cpu_entry cpu[255]; + struct sclp_cpu_entry cpu[MAX_CPU_ADDRESS + 1]; }; int sclp_get_cpu_info(struct sclp_cpu_info *info); -- cgit v0.10.2 From 8cb04be88656ad20ba7cb017726c73b7f33796fb Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Fri, 29 Nov 2013 16:33:02 +0100 Subject: s390: increase CONFIG_NR_CPUS limit In current models, maximum number of active cores is 101. [heiko.carstens@de.ibm.com]: Xose's patch increased the maximum possible value of CONFIG_NR_CPUS to 101. I changed this to 256 instead. Signed-off-by: Xose Vazquez Perez Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 5877e71..1e1a03d 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -347,14 +347,14 @@ config SMP Even if you don't know what to do here, say Y. config NR_CPUS - int "Maximum number of CPUs (2-64)" - range 2 64 + int "Maximum number of CPUs (2-256)" + range 2 256 depends on SMP default "32" if !64BIT default "64" if 64BIT help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 64 and the + kernel will support. The maximum supported value is 256 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds -- cgit v0.10.2 From 06aae6834eb473c94a2493c145fc3e6c9fcf26a5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 30 Nov 2013 12:57:13 +0100 Subject: s390/vdso: fix access-list entry initialization The access-list entry is supposed to have the fetch-only bit set, however a reserved bit got set instead. Userspace isn't able to write to the page anyway since the accessed page has the read-only bit set. So this saves us only for bad surprises in the future if the reserved bit gets used. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index a84476f..6136490 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -125,7 +125,7 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore) psal[i] = 0x80000000; lowcore->paste[4] = (u32)(addr_t) psal; - psal[0] = 0x20000000; + psal[0] = 0x02000000; psal[2] = (u32)(addr_t) aste; *(unsigned long *) (aste + 2) = segment_table + _ASCE_TABLE_LENGTH + _ASCE_USER_BITS + _ASCE_TYPE_SEGMENT; -- cgit v0.10.2 From b5e64b3de7fdd1db0a12871f7114fc1da899df8e Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 2 Dec 2013 14:54:56 +0100 Subject: s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID The code to use the ECTG instruction to calculate the cputime for the current thread is currently used only for the per-thread CPU-clock with the clockid -2 (PID=0, VIRT=1). Use the same code for the clockid CLOCK_THREAD_CPUTIME_ID to speed up the more common clockid as well. Reported-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 496116c..e4c99a1 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -72,6 +72,7 @@ int main(void) /* constants used by the vdso */ DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME); DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC); + DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID); DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC); BLANK(); /* idle data offsets */ diff --git a/arch/s390/kernel/vdso64/clock_getres.S b/arch/s390/kernel/vdso64/clock_getres.S index 176e1f7..34deba7 100644 --- a/arch/s390/kernel/vdso64/clock_getres.S +++ b/arch/s390/kernel/vdso64/clock_getres.S @@ -23,7 +23,9 @@ __kernel_clock_getres: je 0f cghi %r2,__CLOCK_MONOTONIC je 0f - cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */ + cghi %r2,__CLOCK_THREAD_CPUTIME_ID + je 0f + cghi %r2,-2 /* Per-thread CPUCLOCK with PID=0, VIRT=1 */ jne 2f larl %r5,_vdso_data icm %r0,15,__LC_ECTG_OK(%r5) diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index 0add107..4007007 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -22,7 +22,9 @@ __kernel_clock_gettime: larl %r5,_vdso_data cghi %r2,__CLOCK_REALTIME je 4f - cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */ + cghi %r2,__CLOCK_THREAD_CPUTIME_ID + je 9f + cghi %r2,-2 /* Per-thread CPUCLOCK with PID=0, VIRT=1 */ je 9f cghi %r2,__CLOCK_MONOTONIC jne 12f -- cgit v0.10.2 From ce8e0fd239e411e08a0cd83868898cd3f573d7cf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 15:01:35 +0100 Subject: ALSA: hda/analog - Handle inverted EAPD properly in vmaster hook ad_vmaster_eapd_hook() needs to handle the inverted EAPD case properly, too. Otherwise the output gets broken on Lenovo N100 with AD1986A codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 34d86ec..f6351b8 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -147,6 +147,8 @@ static void ad_vmaster_eapd_hook(void *private_data, int enabled) if (!spec->eapd_nid) return; + if (codec->inv_eapd) + enabled = !enabled; snd_hda_codec_update_cache(codec, spec->eapd_nid, 0, AC_VERB_SET_EAPD_BTLENABLE, enabled ? 0x02 : 0x00); -- cgit v0.10.2 From b3bd4fc3822a6b5883eaa556822487d87752d443 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Dec 2013 15:04:03 +0100 Subject: ALSA: hda - Use always amps for auto-mute on AD1986A codec It seems that AD1986A cannot manage the dynamic pin on/off for auto-muting, but rather gets confused. Since each output has own amp, let's use it instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971 Cc: [v3.11+] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index f6351b8..cac015b 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -361,6 +361,9 @@ static int patch_ad1986a(struct hda_codec *codec) */ spec->gen.multiout.no_share_stream = 1; + /* AD1986A can't manage the dynamic pin on/off smoothly */ + spec->gen.auto_mute_via_amp = 1; + snd_hda_pick_fixup(codec, ad1986a_fixup_models, ad1986a_fixup_tbl, ad1986a_fixups); snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE); -- cgit v0.10.2 From ca5de58ba746b08c920b2024aaf01aa1500b110d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 2 Dec 2013 18:00:36 +0100 Subject: s390/time,vdso: fix clock_gettime for CLOCK_MONOTONIC With git commit 79c74ecbebf76732f91b82a62ce7fc8a88326962 "s390/time,vdso: convert to the new update_vsyscall interface" the new update_vsyscall function already does the sum of xtime and wall_to_monotonic. The old update_vsyscall function only copied the wall_to_monotonic offset. The vdso code needs to be modified to take this into consideration. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S index 5be8e47..65fc397 100644 --- a/arch/s390/kernel/vdso32/clock_gettime.S +++ b/arch/s390/kernel/vdso32/clock_gettime.S @@ -46,18 +46,13 @@ __kernel_clock_gettime: jnm 3f a %r0,__VDSO_TK_MULT(%r5) 3: alr %r0,%r2 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ - al %r1,__VDSO_XTIME_NSEC+4(%r5) - brc 12,4f - ahi %r0,1 -4: al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ + al %r0,__VDSO_WTOM_NSEC(%r5) al %r1,__VDSO_WTOM_NSEC+4(%r5) brc 12,5f ahi %r0,1 5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ srdl %r0,0(%r2) /* >> tk->shift */ - l %r2,__VDSO_XTIME_SEC+4(%r5) - al %r2,__VDSO_WTOM_SEC+4(%r5) + l %r2,__VDSO_WTOM_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b basr %r5,0 diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index 4007007..91940ed 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -37,13 +37,11 @@ __kernel_clock_gettime: jnz 0b stck 48(%r15) /* Store TOD clock */ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ - lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ - alg %r0,__VDSO_WTOM_SEC(%r5) /* + wall_to_monotonic.sec */ + lg %r0,__VDSO_WTOM_SEC(%r5) lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ - alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ + alg %r1,__VDSO_WTOM_NSEC(%r5) srlg %r1,%r1,0(%r2) /* >> tk->shift */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 0b -- cgit v0.10.2 From 6389075eff7dc1e6db39203c968394486c13b3e2 Mon Sep 17 00:00:00 2001 From: Vince Hsu Date: Thu, 28 Nov 2013 19:10:42 +0800 Subject: regulator: as3722: set the correct current limit Simple fix to set the correct current limit for SD0/1/6. Signed-off-by: Vince Hsu Signed-off-by: Mark Brown Fixes: bc407334e9a6 (regulator: as3722: add regulator driver for AMS AS3722) Cc: stable@vger.kernel.org diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index 5917fe3..b9f1d24 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -590,8 +590,8 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev, default: return -EINVAL; } + ret <<= ffs(mask) - 1; val = ret & mask; - val <<= ffs(mask) - 1; return as3722_update_bits(as3722, reg, mask, val); } -- cgit v0.10.2 From 94f33c16f2108ad02599de2459c903ad45d825dc Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 13 Nov 2013 15:35:23 +0530 Subject: [SCSI] pm80xx: Module author addition Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 34f5f5f..03d3ef4 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -1169,6 +1169,7 @@ module_exit(pm8001_exit); MODULE_AUTHOR("Jack Wang "); MODULE_AUTHOR("Anand Kumar Santhanam "); MODULE_AUTHOR("Sangeetha Gnanasekaran "); +MODULE_AUTHOR("Nikith Ganigarakoppal "); MODULE_DESCRIPTION( "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 " "SAS/SATA controller driver"); -- cgit v0.10.2 From 34a9b81b476ea0fa7a2e7ec642830f690eb093aa Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 30 Oct 2013 16:13:22 +0530 Subject: [SCSI] pm80xx: Fix for direct attached device. In case of direct attached SATA device delay is not enough. It will give crash for set device state command response and wait_for_completion is the best solution for this. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index f4eb18e..f50ac44 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -1098,15 +1098,17 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun) struct pm8001_tmf_task tmf_task; struct pm8001_device *pm8001_dev = dev->lldd_dev; struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + DECLARE_COMPLETION_ONSTACK(completion_setstate); if (dev_is_sata(dev)) { struct sas_phy *phy = sas_get_local_phy(dev); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , dev, 1, 0); rc = sas_phy_reset(phy, 1); sas_put_local_phy(phy); + pm8001_dev->setds_completion = &completion_setstate; rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, pm8001_dev, 0x01); - msleep(2000); + wait_for_completion(&completion_setstate); } else { tmf_task.tmf = TMF_LU_RESET; rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); -- cgit v0.10.2 From 7d029005484a6125a91a075518b9cfde830bc709 Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 30 Oct 2013 16:23:47 +0530 Subject: [SCSI] pm80xx: Resetting the phy state. Setting the phy state for hard reset response. After sending hard reset for a device ,phy down event sets the phy state to zero but for phy up event it will not set the phy state again.This will cause problem to successive hard resets. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index f16ece9..0a1296a 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3403,6 +3403,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; PM8001_MSG_DBG(pm8001_ha, pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", port_id, phy_id)); @@ -3483,6 +3484,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," " phy id = %d\n", port_id, phy_id)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 6d91e24..e4867e6 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -131,6 +131,10 @@ #define LINKRATE_30 (0x02 << 8) #define LINKRATE_60 (0x04 << 8) +/* for phy state */ + +#define PHY_STATE_LINK_UP_SPC 0x1 + /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */ #define GSM_SM_BASE 0x4F0000 struct mpi_msg_hdr{ diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 8987b17..c950dc5 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -2894,6 +2894,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; PM8001_MSG_DBG(pm8001_ha, pm8001_printk( "portid:%d; phyid:%d; linkrate:%d; " "portstate:%x; devicetype:%x\n", @@ -2978,6 +2979,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) port_id, phy_id, link_rate, portstate)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index c86816b..9970a38 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -215,6 +215,8 @@ #define SAS_DOPNRJT_RTRY_TMO 128 #define SAS_COPNRJT_RTRY_TMO 128 +/* for phy state */ +#define PHY_STATE_LINK_UP_SPCV 0x2 /* Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second. Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128 -- cgit v0.10.2 From 6cd60b37f72b2d15b8983431546af50b7064935d Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Mon, 11 Nov 2013 15:28:14 +0530 Subject: [SCSI] pm80xx: Tasklets synchronization fix. When multiple vectors are used, the vector variable is over written, resulting in unhandled operation for those vectors. This fix prevents the problem by maitaining HBA instance and vector values for each irq. [jejb: checkpatch fixes] Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 03d3ef4..73a120d 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -175,20 +175,16 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) static void pm8001_tasklet(unsigned long opaque) { struct pm8001_hba_info *pm8001_ha; - u32 vec; - pm8001_ha = (struct pm8001_hba_info *)opaque; + struct isr_param *irq_vector; + + irq_vector = (struct isr_param *)opaque; + pm8001_ha = irq_vector->drv_inst; if (unlikely(!pm8001_ha)) BUG_ON(1); - vec = pm8001_ha->int_vector; - PM8001_CHIP_DISP->isr(pm8001_ha, vec); + PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); } #endif -static struct pm8001_hba_info *outq_to_hba(u8 *outq) -{ - return container_of((outq - *outq), struct pm8001_hba_info, outq[0]); -} - /** * pm8001_interrupt_handler_msix - main MSIX interrupt handler. * It obtains the vector number and calls the equivalent bottom @@ -198,18 +194,20 @@ static struct pm8001_hba_info *outq_to_hba(u8 *outq) */ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) { - struct pm8001_hba_info *pm8001_ha = outq_to_hba(opaque); - u8 outq = *(u8 *)opaque; + struct isr_param *irq_vector; + struct pm8001_hba_info *pm8001_ha; irqreturn_t ret = IRQ_HANDLED; + irq_vector = (struct isr_param *)opaque; + pm8001_ha = irq_vector->drv_inst; + if (unlikely(!pm8001_ha)) return IRQ_NONE; if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) return IRQ_NONE; - pm8001_ha->int_vector = outq; #ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet); + tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]); #else - ret = PM8001_CHIP_DISP->isr(pm8001_ha, outq); + ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); #endif return ret; } @@ -230,9 +228,8 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) return IRQ_NONE; - pm8001_ha->int_vector = 0; #ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet); + tasklet_schedule(&pm8001_ha->tasklet[0]); #else ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0); #endif @@ -457,7 +454,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, { struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); - + int j; pm8001_ha = sha->lldd_ha; if (!pm8001_ha) @@ -480,12 +477,14 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, pm8001_ha->iomb_size = IOMB_SIZE_SPC; #ifdef PM8001_USE_TASKLET - /** - * default tasklet for non msi-x interrupt handler/first msi-x - * interrupt handler - **/ - tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet, - (unsigned long)pm8001_ha); + /* Tasklet for non msi-x interrupt handler */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[0])); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[j])); #endif pm8001_ioremap(pm8001_ha); if (!pm8001_alloc(pm8001_ha, ent)) @@ -733,19 +732,20 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) "pci_enable_msix request ret:%d no of intr %d\n", rc, pm8001_ha->number_of_intr)); - for (i = 0; i < number_of_intr; i++) - pm8001_ha->outq[i] = i; for (i = 0; i < number_of_intr; i++) { snprintf(intr_drvname[i], sizeof(intr_drvname[0]), DRV_NAME"%d", i); + pm8001_ha->irq_vector[i].irq_id = i; + pm8001_ha->irq_vector[i].drv_inst = pm8001_ha; + if (request_irq(pm8001_ha->msix_entries[i].vector, pm8001_interrupt_handler_msix, flag, - intr_drvname[i], &pm8001_ha->outq[i])) { + intr_drvname[i], &(pm8001_ha->irq_vector[i]))) { for (j = 0; j < i; j++) free_irq( pm8001_ha->msix_entries[j].vector, - &pm8001_ha->outq[j]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pm8001_ha->pdev); break; } @@ -907,7 +907,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; - int i; + int i, j; pm8001_ha = sha->lldd_ha; sas_unregister_ha(sha); sas_remove_host(pm8001_ha->shost); @@ -921,13 +921,18 @@ static void pm8001_pci_remove(struct pci_dev *pdev) synchronize_irq(pm8001_ha->msix_entries[i].vector); for (i = 0; i < pm8001_ha->number_of_intr; i++) free_irq(pm8001_ha->msix_entries[i].vector, - &pm8001_ha->outq[i]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pdev); #else free_irq(pm8001_ha->irq, sha); #endif #ifdef PM8001_USE_TASKLET - tasklet_kill(&pm8001_ha->tasklet); + /* For non-msix and msix interrupts */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_kill(&pm8001_ha->tasklet[0]); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_kill(&pm8001_ha->tasklet[j]); #endif pm8001_free(pm8001_ha); kfree(sha->sas_phy); @@ -948,7 +953,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; - int i; + int i, j; u32 device_state; pm8001_ha = sha->lldd_ha; flush_workqueue(pm8001_wq); @@ -964,13 +969,18 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state) synchronize_irq(pm8001_ha->msix_entries[i].vector); for (i = 0; i < pm8001_ha->number_of_intr; i++) free_irq(pm8001_ha->msix_entries[i].vector, - &pm8001_ha->outq[i]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pdev); #else free_irq(pm8001_ha->irq, sha); #endif #ifdef PM8001_USE_TASKLET - tasklet_kill(&pm8001_ha->tasklet); + /* For non-msix and msix interrupts */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_kill(&pm8001_ha->tasklet[0]); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_kill(&pm8001_ha->tasklet[j]); #endif device_state = pci_choose_state(pdev, state); pm8001_printk("pdev=0x%p, slot=%s, entering " @@ -993,7 +1003,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev) struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; int rc; - u8 i = 0; + u8 i = 0, j; u32 device_state; pm8001_ha = sha->lldd_ha; device_state = pdev->current_state; @@ -1033,10 +1043,14 @@ static int pm8001_pci_resume(struct pci_dev *pdev) if (rc) goto err_out_disable; #ifdef PM8001_USE_TASKLET - /* default tasklet for non msi-x interrupt handler/first msi-x - * interrupt handler */ - tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet, - (unsigned long)pm8001_ha); + /* Tasklet for non msi-x interrupt handler */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[0])); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[j])); #endif PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0); if (pm8001_ha->chip_id != chip_8001) { diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 6037d47..6c5fd5e 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -466,6 +466,10 @@ struct pm8001_hba_memspace { u64 membase; u32 memsize; }; +struct isr_param { + struct pm8001_hba_info *drv_inst; + u32 irq_id; +}; struct pm8001_hba_info { char name[PM8001_NAME_LENGTH]; struct list_head list; @@ -519,14 +523,13 @@ struct pm8001_hba_info { int number_of_intr;/*will be used in remove()*/ #endif #ifdef PM8001_USE_TASKLET - struct tasklet_struct tasklet; + struct tasklet_struct tasklet[PM8001_MAX_MSIX_VEC]; #endif u32 logging_level; u32 fw_status; u32 smp_exp_mode; - u32 int_vector; const struct firmware *fw_image; - u8 outq[PM8001_MAX_MSIX_VEC]; + struct isr_param irq_vector[PM8001_MAX_MSIX_VEC]; }; struct pm8001_work { -- cgit v0.10.2 From a1470c7bf3a4676e62e4c0fb204e339399eb5c59 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 15 Nov 2013 14:58:00 -0800 Subject: [SCSI] enclosure: fix WARN_ON in dual path device removing Bug report from: wenxiong@linux.vnet.ibm.com The issue is happened in dual controller configuration. We got the sysfs warnings when rmmod the ipr module. enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister() for each componment deivce, device_unregister() ->device_del()->kobject_del() ->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL. For each componment device, enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link() in which checking kobj->sd again, it has been set as NULL when doing device_unregister. So we saw all these sysfs WARNING. Tested-by: wenxiong@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 0e8df41..2cf2bbc 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -198,6 +198,13 @@ static void enclosure_remove_links(struct enclosure_component *cdev) { char name[ENCLOSURE_NAME_SIZE]; + /* + * In odd circumstances, like multipath devices, something else may + * already have removed the links, so check for this condition first. + */ + if (!cdev->dev->kobj.sd) + return; + enclosure_link_name(cdev, name); sysfs_remove_link(&cdev->dev->kobj, name); sysfs_remove_link(&cdev->cdev.kobj, "device"); -- cgit v0.10.2 From 2ba2866f782f7f1c38abc3dd56d3295efd289264 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 2 Dec 2013 11:38:13 -0800 Subject: ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. Fix the following error message: pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x SDIO card is not detected after moving pin mux to omap4_pmx_core since sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes a regression where WLAN did not work after a warm reset or after one up/down cycle that happened when we move omap4 to boot using device tree only. For reference, the kernel bug is described at: https://bugzilla.kernel.org/show_bug.cgi?id=63821 Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Balaji T K [tony@atomide.com: update comments to describe the regression] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e850..88c6a05 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; -- cgit v0.10.2 From 2562f5281355d59b7ba31a46567e24ede4e2dea1 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 2 Dec 2013 11:38:14 -0800 Subject: ARM: dts: omap4-sdp: Fix pin muxing for wl12xx Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes WLAN on omap4-sdp that got broken in v3.10 when we moved omap4 to boot using device tree only as I did not have the WL12XX card in my omap4 SDP to test with. The commit that attempted to make WL12XX working on omap4 SDP was 775d2418f309 (ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze). Signed-off-by: Balaji T K [tony@atomide.com: updated comments for the regression] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5fc3f43..dbc81fb 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -300,12 +300,12 @@ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; -- cgit v0.10.2 From 33e9c392adf521b0a5be7ee2b9b28705b47f8967 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 2 Dec 2013 11:38:14 -0800 Subject: ARM: dts: omap3-beagle: Add omap-twl4030 audio support This adds typical McBSP2-TWL4030 audio description to the legacy Beagle Board. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4e384fc..3ba4a62 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,6 +61,14 @@ vcc-supply = <&hsusb2_power>; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + gpio_keys { compatible = "gpio-keys"; @@ -120,6 +128,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; -- cgit v0.10.2 From 1cfc4bdd51970ac07c9eea545e65a3b16dc269b6 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 2 Dec 2013 11:38:14 -0800 Subject: ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm Commit 'cd8abed' "ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm" leads to the following Smatch complaint: arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register() error: we previously assumed 'arch_pwrdm' could be null (see line 105) So, fix the unchecked dereference of arch_pwrdm. Reported-by: Dan Carpenter Acked-by: Nishanth Menon Signed-off-by: Rajendra Nayak Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index e233dfc..93a2a6e 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -128,7 +128,8 @@ skip_voltdm: for (i = 0; i < pwrdm->banks; i++) pwrdm->ret_mem_off_counter[i] = 0; - arch_pwrdm->pwrdm_wait_transition(pwrdm); + if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition) + arch_pwrdm->pwrdm_wait_transition(pwrdm); pwrdm->state = pwrdm_read_pwrst(pwrdm); pwrdm->state_counter[pwrdm->state] = 1; -- cgit v0.10.2 From ac46bf3933421bde881399d9ad3d165064862cc3 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Mon, 2 Dec 2013 11:38:15 -0800 Subject: ARM: dts: Fix the name of supplies for smsc911x shared by OMAP drivers/net/ethernet/smsc/smsc911x.c is expecting supplies named "vdd33a" and "vddvario". Currently the shared DTS file provides "vmmc" and "vmmc_aux", and the supply lookup will fail: smsc911x 2c000000.ethernet: Looking up vdd33a-supply from device tree smsc911x 2c000000.ethernet: Looking up vdd33a-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed smsc911x 2c000000.ethernet: Looking up vddvario-supply from device tree smsc911x 2c000000.ethernet: Looking up vddvario-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed Fix it! Looks like commmit 6b2978ac40e4 (ARM: dts: Shared file for omap GPMC connected smsc911x) made the problem more visible by moving the smc911x configuration from the omap3-igep0020.dts file to the generic file. But it seems we've had this problem since commit d72b4415011e (ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support). Tested on OMAP3 Overo platform. Signed-off-by: Florian Vaussard [tony@atomide.com: updated comments for the commits causing the problem] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 9c18adf..f577b7d 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -44,8 +44,8 @@ gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; -- cgit v0.10.2 From b65502879556d041b45104c6a35abbbba28c8f2d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Dec 2013 11:50:37 -0800 Subject: uio: we cannot mmap unaligned page contents In commit 7314e613d5ff ("Fix a few incorrectly checked [io_]remap_pfn_range() calls") the uio driver started more properly checking the passed-in user mapping arguments against the size of the actual uio driver data. That in turn exposed that some driver authors apparently didn't realize that mmap can only work on a page granularity, and had tried to use it with smaller mappings, with the new size check catching that out. So since it's not just the user mmap() arguments that can be confused, make the uio mmap code also verify that the uio driver has the memory allocated at page boundaries in order for mmap to work. If the device memory isn't properly aligned, we return [ENODEV] The fildes argument refers to a file whose type is not supported by mmap(). as per the open group documentation on mmap. Reported-by: Holger Brunck Acked-by: Greg KH Signed-off-by: Linus Torvalds diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 67beb84..f7beb6e 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -653,6 +653,8 @@ static int uio_mmap_physical(struct vm_area_struct *vma) return -EINVAL; mem = idev->info->mem + mi; + if (mem->addr & ~PAGE_MASK) + return -ENODEV; if (vma->vm_end - vma->vm_start > mem->size) return -EINVAL; -- cgit v0.10.2 From aa1a6d6d74fff31060e08f6007037e6d807c8130 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 28 Nov 2013 01:06:38 -0800 Subject: leds: pwm: Fix for deferred probe in DT booted mode We need to make sure that the error code from devm_of_pwm_get() is the one the module returns in case of failure. Restructure the code to make this possible for DT booted case. With this patch the driver can ask for deferred probing when the board is booted with DT. Fixes for example omap4-sdp board's keyboard backlight led. Signed-off-by: Peter Ujfalusi Signed-off-by: Bryan Wu diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 2848171..b31d8e9 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -82,22 +82,12 @@ static inline size_t sizeof_pwm_leds_priv(int num_leds) (sizeof(struct led_pwm_data) * num_leds); } -static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev) +static int led_pwm_create_of(struct platform_device *pdev, + struct led_pwm_priv *priv) { struct device_node *node = pdev->dev.of_node; struct device_node *child; - struct led_pwm_priv *priv; - int count, ret; - - /* count LEDs in this device, so we know how much to allocate */ - count = of_get_child_count(node); - if (!count) - return NULL; - - priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count), - GFP_KERNEL); - if (!priv) - return NULL; + int ret; for_each_child_of_node(node, child) { struct led_pwm_data *led_dat = &priv->leds[priv->num_leds]; @@ -109,6 +99,7 @@ static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev) if (IS_ERR(led_dat->pwm)) { dev_err(&pdev->dev, "unable to request PWM for %s\n", led_dat->cdev.name); + ret = PTR_ERR(led_dat->pwm); goto err; } /* Get the period from PWM core when n*/ @@ -137,28 +128,36 @@ static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev) priv->num_leds++; } - return priv; + return 0; err: while (priv->num_leds--) led_classdev_unregister(&priv->leds[priv->num_leds].cdev); - return NULL; + return ret; } static int led_pwm_probe(struct platform_device *pdev) { struct led_pwm_platform_data *pdata = dev_get_platdata(&pdev->dev); struct led_pwm_priv *priv; - int i, ret = 0; + int count, i; + int ret = 0; + + if (pdata) + count = pdata->num_leds; + else + count = of_get_child_count(pdev->dev.of_node); + + if (!count) + return -EINVAL; - if (pdata && pdata->num_leds) { - priv = devm_kzalloc(&pdev->dev, - sizeof_pwm_leds_priv(pdata->num_leds), - GFP_KERNEL); - if (!priv) - return -ENOMEM; + priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count), + GFP_KERNEL); + if (!priv) + return -ENOMEM; - for (i = 0; i < pdata->num_leds; i++) { + if (pdata) { + for (i = 0; i < count; i++) { struct led_pwm *cur_led = &pdata->leds[i]; struct led_pwm_data *led_dat = &priv->leds[i]; @@ -188,11 +187,11 @@ static int led_pwm_probe(struct platform_device *pdev) if (ret < 0) goto err; } - priv->num_leds = pdata->num_leds; + priv->num_leds = count; } else { - priv = led_pwm_create_of(pdev); - if (!priv) - return -ENODEV; + ret = led_pwm_create_of(pdev, priv); + if (ret) + return ret; } platform_set_drvdata(pdev, priv); -- cgit v0.10.2 From 35773dac5f862cb1c82ea151eba3e2f6de51ec3e Mon Sep 17 00:00:00 2001 From: David Laight Date: Mon, 11 Nov 2013 12:26:54 +0000 Subject: usb: xhci: Link TRB must not occur within a USB payload burst Section 4.11.7.1 of rev 1.0 of the xhci specification states that a link TRB can only occur at a boundary between underlying USB frames (512 bytes for high speed devices). If this isn't done the USB frames aren't formatted correctly and, for example, the USB3 ethernet ax88179_178a card will stop sending (while still receiving) when running a netperf tcp transmit test with (say) and 8k buffer. This should be a candidate for stable, the ax88179_178a driver defaults to gso and tso enabled so it passes a lot of fragmented skb to the USB stack. Notes from Sarah: Discussion: http://marc.info/?l=linux-usb&m=138384509604981&w=2 This patch fixes a long-standing xHCI driver bug that was revealed by a change in 3.12 in the usb-net driver. Commit 638c5115a794981441246fa8fa5d95c1875af5ba "USBNET: support DMA SG" added support to use bulk endpoint scatter-gather (urb->sg). Only the USB ethernet drivers trigger this bug, because the mass storage driver sends sg list entries in page-sized chunks. This patch only fixes the issue for bulk endpoint scatter-gather. The problem will still occur for periodic endpoints, because hosts will interpret no-op transfers as a request to skip a service interval, which is not what we want. Luckily, the USB core isn't set up for scatter-gather on isochronous endpoints, and no USB drivers use scatter-gather for interrupt endpoints. Document this known limitation so that developers won't try to use urb->sg for interrupt endpoints until this issue is fixed. The more comprehensive fix would be to allow link TRBs in the middle of the endpoint ring and revert this patch, but that fix would touch too much code to be allowed in for stable. This patch should be backported to kernels as old as 3.12, that contain the commit 638c5115a794981441246fa8fa5d95c1875af5ba "USBNET: support DMA SG". Without this patch, the USB network device gets wedged, and stops sending packets. Mark Lord confirms this patch fixes the regression: http://marc.info/?l=linux-netdev&m=138487107625966&w=2 Signed-off-by: David Laight Signed-off-by: Sarah Sharp Tested-by: Mark Lord Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1e2f3f4..53c2e29 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2973,8 +2973,58 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, } while (1) { - if (room_on_ring(xhci, ep_ring, num_trbs)) - break; + if (room_on_ring(xhci, ep_ring, num_trbs)) { + union xhci_trb *trb = ep_ring->enqueue; + unsigned int usable = ep_ring->enq_seg->trbs + + TRBS_PER_SEGMENT - 1 - trb; + u32 nop_cmd; + + /* + * Section 4.11.7.1 TD Fragments states that a link + * TRB must only occur at the boundary between + * data bursts (eg 512 bytes for 480M). + * While it is possible to split a large fragment + * we don't know the size yet. + * Simplest solution is to fill the trb before the + * LINK with nop commands. + */ + if (num_trbs == 1 || num_trbs <= usable || usable == 0) + break; + + if (ep_ring->type != TYPE_BULK) + /* + * While isoc transfers might have a buffer that + * crosses a 64k boundary it is unlikely. + * Since we can't add NOPs without generating + * gaps in the traffic just hope it never + * happens at the end of the ring. + * This could be fixed by writing a LINK TRB + * instead of the first NOP - however the + * TRB_TYPE_LINK_LE32() calls would all need + * changing to check the ring length. + */ + break; + + if (num_trbs >= TRBS_PER_SEGMENT) { + xhci_err(xhci, "Too many fragments %d, max %d\n", + num_trbs, TRBS_PER_SEGMENT - 1); + return -ENOMEM; + } + + nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) | + ep_ring->cycle_state); + ep_ring->num_trbs_free -= usable; + do { + trb->generic.field[0] = 0; + trb->generic.field[1] = 0; + trb->generic.field[2] = 0; + trb->generic.field[3] = nop_cmd; + trb++; + } while (--usable); + ep_ring->enqueue = trb; + if (room_on_ring(xhci, ep_ring, num_trbs)) + break; + } if (ep_ring == xhci->cmd_ring) { xhci_err(xhci, "Do not support expand command ring\n"); diff --git a/include/linux/usb.h b/include/linux/usb.h index 7454865..512ab16 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1264,6 +1264,8 @@ typedef void (*usb_complete_t)(struct urb *); * @sg: scatter gather buffer list, the buffer size of each element in * the list (except the last) must be divisible by the endpoint's * max packet size if no_sg_constraint isn't set in 'struct usb_bus' + * (FIXME: scatter-gather under xHCI is broken for periodic transfers. + * Do not use urb->sg for interrupt endpoints for now, only bulk.) * @num_mapped_sgs: (internal) number of mapped sg entries * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may -- cgit v0.10.2 From 9f740ffa8134aaef770f964485dac3ed6780d8b7 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 27 Nov 2013 22:19:00 +0000 Subject: HID: hid-sensor-hub: Add logical min and max Exporting logical minimum and maximum of HID fields as part of the hid sensor attribute info. This can be used for range checking and to calculate enumeration base for NAry fields of HID sensor hub. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index a184e19..d87f7cb 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -112,13 +112,15 @@ static int sensor_hub_get_physical_device_count( static void sensor_hub_fill_attr_info( struct hid_sensor_hub_attribute_info *info, - s32 index, s32 report_id, s32 units, s32 unit_expo, s32 size) + s32 index, s32 report_id, struct hid_field *field) { info->index = index; info->report_id = report_id; - info->units = units; - info->unit_expo = unit_expo; - info->size = size/8; + info->units = field->unit; + info->unit_expo = field->unit_exponent; + info->size = (field->report_size * field->report_count)/8; + info->logical_minimum = field->logical_minimum; + info->logical_maximum = field->logical_maximum; } static struct hid_sensor_hub_callbacks *sensor_hub_get_callback( @@ -325,9 +327,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, if (field->physical == usage_id && field->logical == attr_usage_id) { sensor_hub_fill_attr_info(info, i, report->id, - field->unit, field->unit_exponent, - field->report_size * - field->report_count); + field); ret = 0; } else { for (j = 0; j < field->maxusage; ++j) { @@ -336,11 +336,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, field->usage[j].collection_index == collection_index) { sensor_hub_fill_attr_info(info, - i, report->id, - field->unit, - field->unit_exponent, - field->report_size * - field->report_count); + i, report->id, field); ret = 0; break; } diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index 206a2af..b914ca3 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -42,6 +42,8 @@ struct hid_sensor_hub_attribute_info { s32 units; s32 unit_expo; s32 size; + s32 logical_minimum; + s32 logical_maximum; }; /** -- cgit v0.10.2 From 751d17e23a9f7c8e0bca5c0b2e8d39af655ecd2a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 27 Nov 2013 22:19:00 +0000 Subject: iio: hid-sensors: Fix power and report state In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig index 1178121..39188b7 100644 --- a/drivers/iio/common/hid-sensors/Kconfig +++ b/drivers/iio/common/hid-sensors/Kconfig @@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER If this driver is compiled as a module, it will be named hid-sensor-trigger. -config HID_SENSOR_ENUM_BASE_QUIRKS - bool "ENUM base quirks for HID Sensor IIO drivers" - depends on HID_SENSOR_IIO_COMMON - help - Say yes here to build support for sensor hub FW using - enumeration, which is using 1 as base instead of 0. - Since logical minimum is still set 0 instead of 1, - there is no easy way to differentiate. - endmenu diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index bbd6426..7dcf839 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig, { struct hid_sensor_common *st = iio_trigger_get_drvdata(trig); int state_val; + int report_val; if (state) { if (sensor_hub_device_open(st->hsdev)) return -EIO; - } else + state_val = + HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM; + report_val = + HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM; + + } else { sensor_hub_device_close(st->hsdev); + state_val = + HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM; + report_val = + HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM; + } - state_val = state ? 1 : 0; - if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS)) - ++state_val; st->data_ready = state; + state_val += st->power_state.logical_minimum; + report_val += st->report_state.logical_minimum; sensor_hub_set_feature(st->hsdev, st->power_state.report_id, st->power_state.index, (s32)state_val); sensor_hub_set_feature(st->hsdev, st->report_state.report_id, st->report_state.index, - (s32)state_val); + (s32)report_val); return 0; } diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 4f945d3..8323775 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -117,4 +117,16 @@ #define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316 #define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319 +/* Power state enumerations */ +#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00 +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01 +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02 +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03 +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04 +#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05 + +/* Report State enumerations */ +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00 +#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01 + #endif -- cgit v0.10.2 From 419a4aaeb0f7a96359f7e937201b004f23e61976 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 2 Dec 2013 11:25:00 +0000 Subject: Fix build failure for gp2ap020a00f.c drivers/built-in.o: In function `gp2ap020a00f_thresh_event_handler': powercap_sys.c:(.text+0x15f90c): undefined reference to `irq_work_queue' make[1]: *** [vmlinux] Error 1 make[1]: Target `uImage' not remade because of errors. make: *** [sub-make] Error 2 make: Target `uImage' not remade because of errors. You need the IRQ work support, but GP2AP020A00F is not selecting this symbol. Signed-off-by: Russell King Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index b0d65df..a022f27 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -43,6 +43,7 @@ config GP2AP020A00F depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER + select IRQ_WORK help Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip hooked to an I2C bus. -- cgit v0.10.2 From 180f805f4f03b2894701f9831b4e96a308330b22 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 21 Nov 2013 09:52:01 -0500 Subject: drm/radeon: fix typo in fetching mpll params Copy-paste typo. Value should be 0-2, not 0-1. Noticed-by: Sylvain BERTRAND Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index f79ee18..5c39bf7 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2918,7 +2918,7 @@ int radeon_atom_get_memory_pll_dividers(struct radeon_device *rdev, mpll_param->dll_speed = args.ucDllSpeed; mpll_param->bwcntl = args.ucBWCntl; mpll_param->vco_mode = - (args.ucPllCntlFlag & MPLL_CNTL_FLAG_VCO_MODE_MASK) ? 1 : 0; + (args.ucPllCntlFlag & MPLL_CNTL_FLAG_VCO_MODE_MASK); mpll_param->yclk_sel = (args.ucPllCntlFlag & MPLL_CNTL_FLAG_BYPASS_DQ_PLL) ? 1 : 0; mpll_param->qdr = -- cgit v0.10.2 From 55d4e020fb8ddd3896a8cd3351028f5c3a2c4bd3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 25 Nov 2013 13:20:59 -0500 Subject: drm/radeon: program DCE2 audio dto just like DCE3 Seems to work like the DCE3 version despite what the register spec says. bug: https://bugs.freedesktop.org/show_bug.cgi?id=71975 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 4b89262..b7d3ecb 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -304,9 +304,9 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo); WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ } - } else if (ASIC_IS_DCE3(rdev)) { + } else { /* according to the reg specs, this should DCE3.2 only, but in - * practice it seems to cover DCE3.0/3.1 as well. + * practice it seems to cover DCE2.0/3.0/3.1 as well. */ if (dig->dig_encoder == 0) { WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); @@ -317,10 +317,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100); WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ } - } else { - /* according to the reg specs, this should be DCE2.0 and DCE3.0/3.1 */ - WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | - AUDIO_DTO_MODULE(clock / 10)); } } -- cgit v0.10.2 From ec39f64bba3421c2060fcbd1aeb6eec81fe0a42d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 22 Nov 2013 21:52:00 -0800 Subject: drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups Simplify the code and fix race condition seen because attribute files were created after hwmon device registration. Signed-off-by: Guenter Roeck Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index d1385cc..dc75bb6 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -537,8 +537,7 @@ static ssize_t radeon_hwmon_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { - struct drm_device *ddev = dev_get_drvdata(dev); - struct radeon_device *rdev = ddev->dev_private; + struct radeon_device *rdev = dev_get_drvdata(dev); int temp; if (rdev->asic->pm.get_temperature) @@ -566,23 +565,14 @@ static ssize_t radeon_hwmon_show_temp_thresh(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", temp); } -static ssize_t radeon_hwmon_show_name(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "radeon\n"); -} - static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, radeon_hwmon_show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, radeon_hwmon_show_temp_thresh, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, radeon_hwmon_show_temp_thresh, NULL, 1); -static SENSOR_DEVICE_ATTR(name, S_IRUGO, radeon_hwmon_show_name, NULL, 0); static struct attribute *hwmon_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, - &sensor_dev_attr_name.dev_attr.attr, NULL }; @@ -607,11 +597,15 @@ static const struct attribute_group hwmon_attrgroup = { .is_visible = hwmon_attributes_visible, }; +static const struct attribute_group *hwmon_groups[] = { + &hwmon_attrgroup, + NULL +}; + static int radeon_hwmon_init(struct radeon_device *rdev) { int err = 0; - - rdev->pm.int_hwmon_dev = NULL; + struct device *hwmon_dev; switch (rdev->pm.int_thermal_type) { case THERMAL_TYPE_RV6XX: @@ -624,20 +618,13 @@ static int radeon_hwmon_init(struct radeon_device *rdev) case THERMAL_TYPE_KV: if (rdev->asic->pm.get_temperature == NULL) return err; - rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev); - if (IS_ERR(rdev->pm.int_hwmon_dev)) { - err = PTR_ERR(rdev->pm.int_hwmon_dev); + hwmon_dev = hwmon_device_register_with_groups(rdev->dev, + "radeon", rdev, + hwmon_groups); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); dev_err(rdev->dev, "Unable to register hwmon device: %d\n", err); - break; - } - dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev); - err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj, - &hwmon_attrgroup); - if (err) { - dev_err(rdev->dev, - "Unable to create hwmon sysfs file: %d\n", err); - hwmon_device_unregister(rdev->dev); } break; default: @@ -647,14 +634,6 @@ static int radeon_hwmon_init(struct radeon_device *rdev) return err; } -static void radeon_hwmon_fini(struct radeon_device *rdev) -{ - if (rdev->pm.int_hwmon_dev) { - sysfs_remove_group(&rdev->pm.int_hwmon_dev->kobj, &hwmon_attrgroup); - hwmon_device_unregister(rdev->pm.int_hwmon_dev); - } -} - static void radeon_dpm_thermal_work_handler(struct work_struct *work) { struct radeon_device *rdev = @@ -1337,8 +1316,6 @@ static void radeon_pm_fini_old(struct radeon_device *rdev) if (rdev->pm.power_state) kfree(rdev->pm.power_state); - - radeon_hwmon_fini(rdev); } static void radeon_pm_fini_dpm(struct radeon_device *rdev) @@ -1358,8 +1335,6 @@ static void radeon_pm_fini_dpm(struct radeon_device *rdev) if (rdev->pm.power_state) kfree(rdev->pm.power_state); - - radeon_hwmon_fini(rdev); } void radeon_pm_fini(struct radeon_device *rdev) -- cgit v0.10.2 From 84d597b74b58dd52621abf5f052a81370ace1816 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 25 Nov 2013 15:42:10 +0100 Subject: drm/radeon: add VMID allocation trace point MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 3044e50..aa8f778 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -29,6 +29,7 @@ #include #include "radeon.h" #include "radeon_reg.h" +#include "radeon_trace.h" /* * GART @@ -737,6 +738,7 @@ struct radeon_fence *radeon_vm_grab_id(struct radeon_device *rdev, for (i = 0; i < 2; ++i) { if (choices[i]) { vm->id = choices[i]; + trace_radeon_vm_grab_id(vm->id, ring); return rdev->vm_manager.active[choices[i]]; } } diff --git a/drivers/gpu/drm/radeon/radeon_trace.h b/drivers/gpu/drm/radeon/radeon_trace.h index 9f0e181..8c13aec 100644 --- a/drivers/gpu/drm/radeon/radeon_trace.h +++ b/drivers/gpu/drm/radeon/radeon_trace.h @@ -47,6 +47,21 @@ TRACE_EVENT(radeon_cs, __entry->fences) ); +TRACE_EVENT(radeon_vm_grab_id, + TP_PROTO(unsigned vmid, int ring), + TP_ARGS(vmid, ring), + TP_STRUCT__entry( + __field(u32, vmid) + __field(u32, ring) + ), + + TP_fast_assign( + __entry->vmid = vmid; + __entry->ring = ring; + ), + TP_printk("vmid=%u, ring=%u", __entry->vmid, __entry->ring) +); + TRACE_EVENT(radeon_vm_set_page, TP_PROTO(uint64_t pe, uint64_t addr, unsigned count, uint32_t incr, uint32_t flags), -- cgit v0.10.2 From 9c57a6bd3ea4a9870a7ce2fd961da6ef4986bbc1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 25 Nov 2013 15:42:11 +0100 Subject: drm/radeon: add radeon_vm_bo_update trace point MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also rename the function to better reflect what it is doing. agd5f: fix argument size warning Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ecf2a39..b1f990d 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -2710,10 +2710,10 @@ void radeon_vm_fence(struct radeon_device *rdev, struct radeon_vm *vm, struct radeon_fence *fence); uint64_t radeon_vm_map_gart(struct radeon_device *rdev, uint64_t addr); -int radeon_vm_bo_update_pte(struct radeon_device *rdev, - struct radeon_vm *vm, - struct radeon_bo *bo, - struct ttm_mem_reg *mem); +int radeon_vm_bo_update(struct radeon_device *rdev, + struct radeon_vm *vm, + struct radeon_bo *bo, + struct ttm_mem_reg *mem); void radeon_vm_bo_invalidate(struct radeon_device *rdev, struct radeon_bo *bo); struct radeon_bo_va *radeon_vm_bo_find(struct radeon_vm *vm, diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index f41594b..0b36616 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -360,13 +360,13 @@ static int radeon_bo_vm_update_pte(struct radeon_cs_parser *parser, struct radeon_bo *bo; int r; - r = radeon_vm_bo_update_pte(rdev, vm, rdev->ring_tmp_bo.bo, &rdev->ring_tmp_bo.bo->tbo.mem); + r = radeon_vm_bo_update(rdev, vm, rdev->ring_tmp_bo.bo, &rdev->ring_tmp_bo.bo->tbo.mem); if (r) { return r; } list_for_each_entry(lobj, &parser->validated, tv.head) { bo = lobj->bo; - r = radeon_vm_bo_update_pte(parser->rdev, vm, bo, &bo->tbo.mem); + r = radeon_vm_bo_update(parser->rdev, vm, bo, &bo->tbo.mem); if (r) { return r; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index aa8f778..96e4400 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -1118,7 +1118,7 @@ static void radeon_vm_update_ptes(struct radeon_device *rdev, } /** - * radeon_vm_bo_update_pte - map a bo into the vm page table + * radeon_vm_bo_update - map a bo into the vm page table * * @rdev: radeon_device pointer * @vm: requested vm @@ -1130,10 +1130,10 @@ static void radeon_vm_update_ptes(struct radeon_device *rdev, * * Object have to be reserved & global and local mutex must be locked! */ -int radeon_vm_bo_update_pte(struct radeon_device *rdev, - struct radeon_vm *vm, - struct radeon_bo *bo, - struct ttm_mem_reg *mem) +int radeon_vm_bo_update(struct radeon_device *rdev, + struct radeon_vm *vm, + struct radeon_bo *bo, + struct ttm_mem_reg *mem) { struct radeon_ib ib; struct radeon_bo_va *bo_va; @@ -1178,6 +1178,8 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, bo_va->valid = false; } + trace_radeon_vm_bo_update(bo_va); + nptes = radeon_bo_ngpu_pages(bo); /* assume two extra pdes in case the mapping overlaps the borders */ @@ -1259,7 +1261,7 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, mutex_lock(&rdev->vm_manager.lock); mutex_lock(&bo_va->vm->mutex); if (bo_va->soffset) { - r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL); + r = radeon_vm_bo_update(rdev, bo_va->vm, bo_va->bo, NULL); } mutex_unlock(&rdev->vm_manager.lock); list_del(&bo_va->vm_list); diff --git a/drivers/gpu/drm/radeon/radeon_trace.h b/drivers/gpu/drm/radeon/radeon_trace.h index 8c13aec..0473257 100644 --- a/drivers/gpu/drm/radeon/radeon_trace.h +++ b/drivers/gpu/drm/radeon/radeon_trace.h @@ -62,6 +62,24 @@ TRACE_EVENT(radeon_vm_grab_id, TP_printk("vmid=%u, ring=%u", __entry->vmid, __entry->ring) ); +TRACE_EVENT(radeon_vm_bo_update, + TP_PROTO(struct radeon_bo_va *bo_va), + TP_ARGS(bo_va), + TP_STRUCT__entry( + __field(u64, soffset) + __field(u64, eoffset) + __field(u32, flags) + ), + + TP_fast_assign( + __entry->soffset = bo_va->soffset; + __entry->eoffset = bo_va->eoffset; + __entry->flags = bo_va->flags; + ), + TP_printk("soffs=%010llx, eoffs=%010llx, flags=%08x", + __entry->soffset, __entry->eoffset, __entry->flags) +); + TRACE_EVENT(radeon_vm_set_page, TP_PROTO(uint64_t pe, uint64_t addr, unsigned count, uint32_t incr, uint32_t flags), -- cgit v0.10.2 From 8f173e22abf2258ddfa73f46eadbb6a6c29f1631 Mon Sep 17 00:00:00 2001 From: Gustavo Zacarias Date: Mon, 11 Nov 2013 09:59:15 -0300 Subject: USB: serial: option: blacklist interface 1 for Huawei E173s-6 Interface 1 on this device isn't for option to bind to otherwise an oops on usb_wwan with log flooding will happen when accessing the port: tty_release: ttyUSB1: read/write wait queue active! It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add it there - it's likely used by the card reader. Signed-off-by: Gustavo Zacarias Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c3d9485..0415d40 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -85,6 +85,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_K4605 0x14C6 +#define HUAWEI_PRODUCT_E173S6 0x1C07 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -572,6 +573,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, -- cgit v0.10.2 From 2bf308d7bc5e8cdd69672199f59532f35339133c Mon Sep 17 00:00:00 2001 From: "Fangxiaozhi (Franko)" Date: Mon, 2 Dec 2013 09:00:11 +0000 Subject: USB: option: support new huawei devices Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceProtocol value. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0415d40..496b7e39 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -637,6 +637,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, @@ -691,6 +695,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, @@ -745,6 +753,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) }, @@ -799,6 +811,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) }, @@ -853,6 +869,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) }, @@ -907,6 +927,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) }, -- cgit v0.10.2 From d444af2dec2e3b9d10941aeabdbdb92fefe4183f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 26 Nov 2013 10:16:31 -0500 Subject: drm/radeon/dpm: simplify state adjust logic for NI This is based on a similar patch from Alexandre Demers. While fixing up some warnings with that patch I saw some additional cleanups that could be applied. This patch simplifies the logic for patching the power state. Signed-off-by: Alex Deucher Cc: Alexandre Demers diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index cdc0030..49c4d48 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -785,8 +785,8 @@ static void ni_apply_state_adjust_rules(struct radeon_device *rdev, struct ni_ps *ps = ni_get_ps(rps); struct radeon_clock_and_voltage_limits *max_limits; bool disable_mclk_switching; - u32 mclk, sclk; - u16 vddc, vddci; + u32 mclk; + u16 vddci; u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc; int i; @@ -839,24 +839,14 @@ static void ni_apply_state_adjust_rules(struct radeon_device *rdev, /* XXX validate the min clocks required for display */ + /* adjust low state */ if (disable_mclk_switching) { - mclk = ps->performance_levels[ps->performance_level_count - 1].mclk; - sclk = ps->performance_levels[0].sclk; - vddc = ps->performance_levels[0].vddc; - vddci = ps->performance_levels[ps->performance_level_count - 1].vddci; - } else { - sclk = ps->performance_levels[0].sclk; - mclk = ps->performance_levels[0].mclk; - vddc = ps->performance_levels[0].vddc; - vddci = ps->performance_levels[0].vddci; + ps->performance_levels[0].mclk = + ps->performance_levels[ps->performance_level_count - 1].mclk; + ps->performance_levels[0].vddci = + ps->performance_levels[ps->performance_level_count - 1].vddci; } - /* adjusted low state */ - ps->performance_levels[0].sclk = sclk; - ps->performance_levels[0].mclk = mclk; - ps->performance_levels[0].vddc = vddc; - ps->performance_levels[0].vddci = vddci; - btc_skip_blacklist_clocks(rdev, max_limits->sclk, max_limits->mclk, &ps->performance_levels[0].sclk, &ps->performance_levels[0].mclk); @@ -868,11 +858,15 @@ static void ni_apply_state_adjust_rules(struct radeon_device *rdev, ps->performance_levels[i].vddc = ps->performance_levels[i - 1].vddc; } + /* adjust remaining states */ if (disable_mclk_switching) { mclk = ps->performance_levels[0].mclk; + vddci = ps->performance_levels[0].vddci; for (i = 1; i < ps->performance_level_count; i++) { if (mclk < ps->performance_levels[i].mclk) mclk = ps->performance_levels[i].mclk; + if (vddci < ps->performance_levels[i].vddci) + vddci = ps->performance_levels[i].vddci; } for (i = 0; i < ps->performance_level_count; i++) { ps->performance_levels[i].mclk = mclk; -- cgit v0.10.2 From 1abd4986f4445b0280a07bc46aefa3d0d30258f9 Mon Sep 17 00:00:00 2001 From: Alexandre Demers Date: Mon, 2 Dec 2013 02:33:11 -0500 Subject: drm/radeon: Fix a typo in Cayman and Evergreen registers According to documentation, 0x00008A60 should be PA_SU_LINE_STIPPLE_VALUE. Signed-off-by: Alexandre Demers Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/reg_srcs/cayman b/drivers/gpu/drm/radeon/reg_srcs/cayman index a072fa8..ca8896d 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/cayman +++ b/drivers/gpu/drm/radeon/reg_srcs/cayman @@ -21,7 +21,7 @@ cayman 0x9400 0x000089AC VGT_COMPUTE_THREAD_GOURP_SIZE 0x000089B0 VGT_HS_OFFCHIP_PARAM 0x00008A14 PA_CL_ENHANCE -0x00008A60 PA_SC_LINE_STIPPLE_VALUE +0x00008A60 PA_SU_LINE_STIPPLE_VALUE 0x00008B10 PA_SC_LINE_STIPPLE_STATE 0x00008BF0 PA_SC_ENHANCE 0x00008D8C SQ_DYN_GPR_CNTL_PS_FLUSH_REQ diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen index b912a37..2513cb2 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/evergreen +++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen @@ -22,7 +22,7 @@ evergreen 0x9400 0x000089A4 VGT_COMPUTE_START_Z 0x000089AC VGT_COMPUTE_THREAD_GOURP_SIZE 0x00008A14 PA_CL_ENHANCE -0x00008A60 PA_SC_LINE_STIPPLE_VALUE +0x00008A60 PA_SU_LINE_STIPPLE_VALUE 0x00008B10 PA_SC_LINE_STIPPLE_STATE 0x00008BF0 PA_SC_ENHANCE 0x00008D8C SQ_DYN_GPR_CNTL_PS_FLUSH_REQ -- cgit v0.10.2 From b7bc799903bbae16795cb15705ddcab80c8f17f1 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 2 Dec 2013 16:11:39 -0500 Subject: drm/radeon: fix VGT_GS_INSTANCE_CNT register This register was incorrect for evergreen and cayman. Signed-off-by: Dave Airlie Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 543dcfa..00e0d44 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -108,9 +108,10 @@ * 1.31- Add support for num Z pipes from GET_PARAM * 1.32- fixes for rv740 setup * 1.33- Add r6xx/r7xx const buffer support + * 1.34- fix evergreen/cayman GS register */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 33 +#define DRIVER_MINOR 34 #define DRIVER_PATCHLEVEL 0 long radeon_drm_ioctl(struct file *filp, diff --git a/drivers/gpu/drm/radeon/reg_srcs/cayman b/drivers/gpu/drm/radeon/reg_srcs/cayman index ca8896d..d46b58d 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/cayman +++ b/drivers/gpu/drm/radeon/reg_srcs/cayman @@ -532,7 +532,7 @@ cayman 0x9400 0x00028B84 PA_SU_POLY_OFFSET_FRONT_OFFSET 0x00028B88 PA_SU_POLY_OFFSET_BACK_SCALE 0x00028B8C PA_SU_POLY_OFFSET_BACK_OFFSET -0x00028B74 VGT_GS_INSTANCE_CNT +0x00028B90 VGT_GS_INSTANCE_CNT 0x00028BD4 PA_SC_CENTROID_PRIORITY_0 0x00028BD8 PA_SC_CENTROID_PRIORITY_1 0x00028BDC PA_SC_LINE_CNTL diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen index 2513cb2..57745c8 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/evergreen +++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen @@ -545,7 +545,7 @@ evergreen 0x9400 0x00028B84 PA_SU_POLY_OFFSET_FRONT_OFFSET 0x00028B88 PA_SU_POLY_OFFSET_BACK_SCALE 0x00028B8C PA_SU_POLY_OFFSET_BACK_OFFSET -0x00028B74 VGT_GS_INSTANCE_CNT +0x00028B90 VGT_GS_INSTANCE_CNT 0x00028C00 PA_SC_LINE_CNTL 0x00028C08 PA_SU_VTX_CNTL 0x00028C0C PA_CL_GB_VERT_CLIP_ADJ -- cgit v0.10.2 From f4042c068ae53625e4a9f39543c2693d07a4e14c Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 2 Dec 2013 15:39:43 -0600 Subject: usb: wusbcore: send keepalives to unauthenticated devices This patch modifies the WUSB device disconnect timer code to send keepalives to all connected devices even if they are not authenticated. This fixes a problem where unauthenticated devices that lose their connection before they are authenticated will stay in the device tree forever. More importantly, devices in this situation will never relinquish their port on the root hub so eventually all root ports will be taken up and no other devices can connect. A comment in the existing code states that there are some devices that may not respond to keepalives if they have not been authenticated. That comment is about 5 years old and I don't know of any WUSB devices that act that way. Either way, any buggy devices that may still be around will continue to work as long as they can transition to the authenticated state within the WUSB LOA timeout of 4s, which is not unreasonable to expect. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e538b72..d1af4e8 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -411,9 +411,6 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, /* * Refresh the list of keep alives to emit in the MMC * - * Some devices don't respond to keep alives unless they've been - * authenticated, so skip unauthenticated devices. - * * We only publish the first four devices that have a coming timeout * condition. Then when we are done processing those, we go for the * next ones. We ignore the ones that have timed out already (they'll @@ -448,7 +445,7 @@ static void __wusbhc_keep_alive(struct wusbhc *wusbhc) if (wusb_dev == NULL) continue; - if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated) + if (wusb_dev->usb_dev == NULL) continue; if (time_after(jiffies, wusb_dev->entry_ts + tt)) { -- cgit v0.10.2 From 6161ae5f1f371e8ff52306d9a1893f5dec6f60a4 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 2 Dec 2013 15:39:44 -0600 Subject: usb: wusbcore: do device lookup while holding the hc mutex This patch modifies the device notification handler to not look up the wusb_dev object before it calls the lower-level handler routines since the wusbhc mutex is not held when calling those routines and the device could go away in the meantime. Instead, let the individual notification handlers get the device ptr if they need to after they have taken the mutex. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index d1af4e8..5107ca9 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -521,11 +521,19 @@ static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr) * * @wusbhc shall be referenced and unlocked */ -static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr) { + struct wusb_dev *wusb_dev; + mutex_lock(&wusbhc->mutex); - wusb_dev->entry_ts = jiffies; - __wusbhc_keep_alive(wusbhc); + wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); + if (wusb_dev == NULL) { + dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n", + srcaddr); + } else { + wusb_dev->entry_ts = jiffies; + __wusbhc_keep_alive(wusbhc); + } mutex_unlock(&wusbhc->mutex); } @@ -579,14 +587,22 @@ static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc, * * @wusbhc shall be referenced and unlocked */ -static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr) { struct device *dev = wusbhc->dev; - - dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr); + struct wusb_dev *wusb_dev; mutex_lock(&wusbhc->mutex); - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx)); + wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); + if (wusb_dev == NULL) { + dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n", + srcaddr); + } else { + dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", + wusb_dev->addr); + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, + wusb_dev->port_idx)); + } mutex_unlock(&wusbhc->mutex); } @@ -608,30 +624,21 @@ void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr, struct wusb_dn_hdr *dn_hdr, size_t size) { struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; if (size < sizeof(struct wusb_dn_hdr)) { dev_err(dev, "DN data shorter than DN header (%d < %d)\n", (int)size, (int)sizeof(struct wusb_dn_hdr)); return; } - - wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); - if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) { - dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n", - dn_hdr->bType, srcaddr); - return; - } - switch (dn_hdr->bType) { case WUSB_DN_CONNECT: wusbhc_handle_dn_connect(wusbhc, dn_hdr, size); break; case WUSB_DN_ALIVE: - wusbhc_handle_dn_alive(wusbhc, wusb_dev); + wusbhc_handle_dn_alive(wusbhc, srcaddr); break; case WUSB_DN_DISCONNECT: - wusbhc_handle_dn_disconnect(wusbhc, wusb_dev); + wusbhc_handle_dn_disconnect(wusbhc, srcaddr); break; case WUSB_DN_MASAVAILCHANGED: case WUSB_DN_RWAKE: -- cgit v0.10.2 From 471e42ad148c05d091219096726d751684ebf918 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 2 Dec 2013 15:39:45 -0600 Subject: usb: wusbcore: fix deadlock in wusbhc_gtk_rekey When multiple wireless USB devices are connected and one of the devices disconnects, the host will distribute a new group key to the remaining devicese using wusbhc_gtk_rekey. wusbhc_gtk_rekey takes the wusbhc->mutex and holds it while it submits a URB to set the new key. This causes a deadlock in wa_urb_enqueue when it calls a device lookup helper function that takes the same lock. This patch changes wusbhc_gtk_rekey to submit a work item to set the GTK so that the URB is submitted without holding wusbhc->mutex. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 5107ca9..f14e792 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -97,18 +97,12 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work); static void wusb_dev_free(struct wusb_dev *wusb_dev) { - if (wusb_dev) { - kfree(wusb_dev->set_gtk_req); - usb_free_urb(wusb_dev->set_gtk_urb); - kfree(wusb_dev); - } + kfree(wusb_dev); } static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) { struct wusb_dev *wusb_dev; - struct urb *urb; - struct usb_ctrlrequest *req; wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL); if (wusb_dev == NULL) @@ -118,22 +112,6 @@ static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work); - urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) - goto err; - wusb_dev->set_gtk_urb = urb; - - req = kmalloc(sizeof(*req), GFP_KERNEL); - if (req == NULL) - goto err; - wusb_dev->set_gtk_req = req; - - req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE; - req->bRequest = USB_REQ_SET_DESCRIPTOR; - req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index); - req->wIndex = 0; - req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength); - return wusb_dev; err: wusb_dev_free(wusb_dev); diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index dd88441..4c40d0d 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -29,19 +29,16 @@ #include #include "wusbhc.h" -static void wusbhc_set_gtk_callback(struct urb *urb); -static void wusbhc_gtk_rekey_done_work(struct work_struct *work); +static void wusbhc_gtk_rekey_work(struct work_struct *work); int wusbhc_sec_create(struct wusbhc *wusbhc) { wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data); wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY; wusbhc->gtk.descr.bReserved = 0; + wusbhc->gtk_index = 0; - wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work); + INIT_WORK(&wusbhc->gtk_rekey_work, wusbhc_gtk_rekey_work); return 0; } @@ -113,7 +110,7 @@ int wusbhc_sec_start(struct wusbhc *wusbhc) wusbhc_generate_gtk(wusbhc); result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, - &wusbhc->gtk.descr.bKeyData, key_size); + &wusbhc->gtk.descr.bKeyData, key_size); if (result < 0) dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n", result); @@ -129,7 +126,7 @@ int wusbhc_sec_start(struct wusbhc *wusbhc) */ void wusbhc_sec_stop(struct wusbhc *wusbhc) { - cancel_work_sync(&wusbhc->gtk_rekey_done_work); + cancel_work_sync(&wusbhc->gtk_rekey_work); } @@ -185,12 +182,14 @@ static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value) static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) { struct usb_device *usb_dev = wusb_dev->usb_dev; + u8 key_index = wusb_key_index(wusbhc->gtk_index, + WUSB_KEY_INDEX_TYPE_GTK, WUSB_KEY_INDEX_ORIGINATOR_HOST); return usb_control_msg( usb_dev, usb_sndctrlpipe(usb_dev, 0), USB_REQ_SET_DESCRIPTOR, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_DT_KEY << 8 | wusbhc->gtk_index, 0, + USB_DT_KEY << 8 | key_index, 0, &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, 1000); } @@ -520,24 +519,55 @@ error_kzalloc: * Once all connected and authenticated devices have received the new * GTK, switch the host to using it. */ -static void wusbhc_gtk_rekey_done_work(struct work_struct *work) +static void wusbhc_gtk_rekey_work(struct work_struct *work) { - struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work); + struct wusbhc *wusbhc = container_of(work, + struct wusbhc, gtk_rekey_work); size_t key_size = sizeof(wusbhc->gtk.data); + int port_idx; + struct wusb_dev *wusb_dev, *wusb_dev_next; + LIST_HEAD(rekey_list); mutex_lock(&wusbhc->mutex); + /* generate the new key */ + wusbhc_generate_gtk(wusbhc); + /* roll the gtk index. */ + wusbhc->gtk_index = (wusbhc->gtk_index + 1) % (WUSB_KEY_INDEX_MAX + 1); + /* + * Save all connected devices on a list while holding wusbhc->mutex and + * take a reference to each one. Then submit the set key request to + * them after releasing the lock in order to avoid a deadlock. + */ + for (port_idx = 0; port_idx < wusbhc->ports_max; port_idx++) { + wusb_dev = wusbhc->port[port_idx].wusb_dev; + if (!wusb_dev || !wusb_dev->usb_dev + || !wusb_dev->usb_dev->authenticated) + continue; - if (--wusbhc->pending_set_gtks == 0) - wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); - + wusb_dev_get(wusb_dev); + list_add_tail(&wusb_dev->rekey_node, &rekey_list); + } mutex_unlock(&wusbhc->mutex); -} -static void wusbhc_set_gtk_callback(struct urb *urb) -{ - struct wusbhc *wusbhc = urb->context; + /* Submit the rekey requests without holding wusbhc->mutex. */ + list_for_each_entry_safe(wusb_dev, wusb_dev_next, &rekey_list, + rekey_node) { + list_del_init(&wusb_dev->rekey_node); + dev_dbg(&wusb_dev->usb_dev->dev, "%s: rekey device at port %d\n", + __func__, wusb_dev->port_idx); + + if (wusb_dev_set_gtk(wusbhc, wusb_dev) < 0) { + dev_err(&wusb_dev->usb_dev->dev, "%s: rekey device at port %d failed\n", + __func__, wusb_dev->port_idx); + } + wusb_dev_put(wusb_dev); + } - queue_work(wusbd, &wusbhc->gtk_rekey_done_work); + /* Switch the host controller to use the new GTK. */ + mutex_lock(&wusbhc->mutex); + wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, + &wusbhc->gtk.descr.bKeyData, key_size); + mutex_unlock(&wusbhc->mutex); } /** @@ -553,26 +583,12 @@ static void wusbhc_set_gtk_callback(struct urb *urb) */ void wusbhc_gtk_rekey(struct wusbhc *wusbhc) { - static const size_t key_size = sizeof(wusbhc->gtk.data); - int p; - - wusbhc_generate_gtk(wusbhc); - - for (p = 0; p < wusbhc->ports_max; p++) { - struct wusb_dev *wusb_dev; - - wusb_dev = wusbhc->port[p].wusb_dev; - if (!wusb_dev || !wusb_dev->usb_dev || !wusb_dev->usb_dev->authenticated) - continue; - - usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev, - usb_sndctrlpipe(wusb_dev->usb_dev, 0), - (void *)wusb_dev->set_gtk_req, - &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, - wusbhc_set_gtk_callback, wusbhc); - if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0) - wusbhc->pending_set_gtks++; - } - if (wusbhc->pending_set_gtks == 0) - wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); + /* + * We need to submit a URB to the downstream WUSB devices in order to + * change the group key. This can't be done while holding the + * wusbhc->mutex since that is also taken in the urb_enqueue routine + * and will cause a deadlock. Instead, queue a work item to do + * it when the lock is not held + */ + queue_work(wusbd, &wusbhc->gtk_rekey_work); } diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index 711b195..6bd3b81 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -97,6 +97,7 @@ struct wusb_dev { struct kref refcnt; struct wusbhc *wusbhc; struct list_head cack_node; /* Connect-Ack list */ + struct list_head rekey_node; /* GTK rekey list */ u8 port_idx; u8 addr; u8 beacon_type:4; @@ -107,8 +108,6 @@ struct wusb_dev { struct usb_wireless_cap_descriptor *wusb_cap_descr; struct uwb_mas_bm availability; struct work_struct devconnect_acked_work; - struct urb *set_gtk_urb; - struct usb_ctrlrequest *set_gtk_req; struct usb_device *usb_dev; }; @@ -296,8 +295,7 @@ struct wusbhc { } __attribute__((packed)) gtk; u8 gtk_index; u32 gtk_tkid; - struct work_struct gtk_rekey_done_work; - int pending_set_gtks; + struct work_struct gtk_rekey_work; struct usb_encryption_descriptor *ccm1_etd; }; diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h index 0c4d4ca..eeb2832 100644 --- a/include/linux/usb/wusb.h +++ b/include/linux/usb/wusb.h @@ -271,6 +271,8 @@ static inline u8 wusb_key_index(int index, int type, int originator) #define WUSB_KEY_INDEX_TYPE_GTK 2 #define WUSB_KEY_INDEX_ORIGINATOR_HOST 0 #define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1 +/* bits 0-3 used for the key index. */ +#define WUSB_KEY_INDEX_MAX 15 /* A CCM Nonce, defined in WUSB1.0[6.4.1] */ struct aes_ccm_nonce { -- cgit v0.10.2 From 09ae6345721afbb7cf3e0920209b140cbe7bff0d Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Mon, 2 Dec 2013 00:05:20 +0100 Subject: ima: Do not free 'entry' before it is initialized 7bc5f447ce9d0 (ima: define new function ima_alloc_init_template() to API) moved the initialization of 'entry' in ima_add_boot_aggregate() a bit more below, after the if (ima_used_chip). So, 'entry' is not initialized while being inside this if-block. So, we should not attempt to free it. Found by Coverity (CID: 1131971) Fixes: 7bc5f447ce9d0 (ima: define new function ima_alloc_init_template() to API) Signed-off-by: Christoph Paasch Signed-off-by: Mimi Zohar diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c index 15f34bd..76b8e2c 100644 --- a/security/integrity/ima/ima_init.c +++ b/security/integrity/ima/ima_init.c @@ -63,7 +63,6 @@ static void __init ima_add_boot_aggregate(void) result = ima_calc_boot_aggregate(&hash.hdr); if (result < 0) { audit_cause = "hashing_error"; - kfree(entry); goto err_out; } } -- cgit v0.10.2 From a7ed7c60e14df5b986f93549717235b882643e7e Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Mon, 2 Dec 2013 19:40:34 +0100 Subject: ima: properly free ima_template_entry structures The new templates management mechanism records information associated to an event into an array of 'ima_field_data' structures and makes it available through the 'template_data' field of the 'ima_template_entry' structure (the element of the measurements list created by IMA). Since 'ima_field_data' contains dynamically allocated data (which length varies depending on the data associated to a selected template field), it is not enough to just free the memory reserved for a 'ima_template_entry' structure if something goes wrong. This patch creates the new function ima_free_template_entry() which walks the array of 'ima_field_data' structures, frees the memory referenced by the 'data' pointer and finally the space reserved for the 'ima_template_entry' structure. Further, it replaces existing kfree() that have a pointer to an 'ima_template_entry' structure as argument with calls to the new function. Fixes: a71dc65: ima: switch to new template management mechanism Signed-off-by: Roberto Sassu Signed-off-by: Mimi Zohar diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 9636e17..0356e1d 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -148,6 +148,7 @@ int ima_alloc_init_template(struct integrity_iint_cache *iint, int xattr_len, struct ima_template_entry **entry); int ima_store_template(struct ima_template_entry *entry, int violation, struct inode *inode, const unsigned char *filename); +void ima_free_template_entry(struct ima_template_entry *entry); const char *ima_d_path(struct path *path, char **pathbuf); /* rbtree tree calls to lookup, insert, delete diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c index 8037484..c38bbce 100644 --- a/security/integrity/ima/ima_api.c +++ b/security/integrity/ima/ima_api.c @@ -22,6 +22,19 @@ #include "ima.h" /* + * ima_free_template_entry - free an existing template entry + */ +void ima_free_template_entry(struct ima_template_entry *entry) +{ + int i; + + for (i = 0; i < entry->template_desc->num_fields; i++) + kfree(entry->template_data[i].data); + + kfree(entry); +} + +/* * ima_alloc_init_template - create and initialize a new template entry */ int ima_alloc_init_template(struct integrity_iint_cache *iint, @@ -37,6 +50,7 @@ int ima_alloc_init_template(struct integrity_iint_cache *iint, if (!*entry) return -ENOMEM; + (*entry)->template_desc = template_desc; for (i = 0; i < template_desc->num_fields; i++) { struct ima_template_field *field = template_desc->fields[i]; u32 len; @@ -51,10 +65,9 @@ int ima_alloc_init_template(struct integrity_iint_cache *iint, (*entry)->template_data_len += sizeof(len); (*entry)->template_data_len += len; } - (*entry)->template_desc = template_desc; return 0; out: - kfree(*entry); + ima_free_template_entry(*entry); *entry = NULL; return result; } @@ -134,7 +147,7 @@ void ima_add_violation(struct file *file, const unsigned char *filename, } result = ima_store_template(entry, violation, inode, filename); if (result < 0) - kfree(entry); + ima_free_template_entry(entry); err_out: integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, filename, op, cause, result, 0); @@ -269,7 +282,7 @@ void ima_store_measurement(struct integrity_iint_cache *iint, if (!result || result == -EEXIST) iint->flags |= IMA_MEASURED; if (result < 0) - kfree(entry); + ima_free_template_entry(entry); } void ima_audit_measurement(struct integrity_iint_cache *iint, diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c index 76b8e2c..3712276 100644 --- a/security/integrity/ima/ima_init.c +++ b/security/integrity/ima/ima_init.c @@ -75,7 +75,7 @@ static void __init ima_add_boot_aggregate(void) result = ima_store_template(entry, violation, NULL, boot_aggregate_name); if (result < 0) - kfree(entry); + ima_free_template_entry(entry); return; err_out: integrity_audit_msg(AUDIT_INTEGRITY_PCR, NULL, boot_aggregate_name, op, -- cgit v0.10.2 From bdbff6bad8a81a90b1e3eb65be8892672cbde601 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 8 Aug 2013 10:51:15 -0500 Subject: MAINTAINERS: Add Kumar to Device Tree Binding maintainers group I'm tossing my hat into the ring of maintainers/reviewers for device tree bindings based on history of dealing with DT on embedded PPC and starting work on ARM SoCs. Signed-off-by: Kumar Gala Acked-by: Pawel Moll Cc: Mark Rutland Acked-by: Stephen Warren Cc: Ian Campbell Cc: Rob Herring Cc: Grant Likely Cc: Olof Johansson Signed-off-by: Rob Herring diff --git a/MAINTAINERS b/MAINTAINERS index 8285ed4..c4d89a7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6240,6 +6240,7 @@ M: Pawel Moll M: Mark Rutland M: Stephen Warren M: Ian Campbell +M: Kumar Gala L: devicetree@vger.kernel.org S: Maintained F: Documentation/devicetree/ -- cgit v0.10.2 From 2bfb66c279a491f92cd5e85f3bbc064295a344fd Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 8 Oct 2013 14:25:43 -0600 Subject: MAINTAINERS: remove swarren from DT bindings I'm afraid I'm rather burned out w.r.t. DT bindings. As has probably been evident, I don't have and haven't made the time to review many recently. As such, remove myself from that MAINTAINERS entry. Signed-off-by: Stephen Warren Signed-off-by: Rob Herring diff --git a/MAINTAINERS b/MAINTAINERS index c4d89a7..7243336 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6238,7 +6238,6 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS M: Rob Herring M: Pawel Moll M: Mark Rutland -M: Stephen Warren M: Ian Campbell M: Kumar Gala L: devicetree@vger.kernel.org -- cgit v0.10.2 From f04bda90392b729fea9b0420b2a87aa6f2abfcd9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 7 Nov 2013 20:58:16 -0600 Subject: dt-bindings: add ARMv8 PMU binding Add missing "arm,armv8-pmuv3" compatible property for ARMv8 PMU. Signed-off-by: Rob Herring Cc: Will Deacon Cc: Pawel Moll Acked-by: Mark Rutland Cc: Ian Campbell diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 343781b..3e1e498 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,6 +7,7 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,armv8-pmuv3" "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" -- cgit v0.10.2 From f1e8e3811486b858bcc7190477bc6e4ea8f3488c Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Fri, 8 Nov 2013 16:08:48 +0530 Subject: ARM: dts: doc: Document missing binding for omap5-mpu The binding and support for omap5-mpu which has a cortex-a15 smp core, gic and integrated L2 cache has been existing for sometime. So Documenting the missing binding here. Cc: Benoit Cousson Signed-off-by: Sricharan R Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 1a5a42c..83f405b 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM. Required properties: - compatible : Should be "ti,omap3-mpu" for OMAP3 Should be "ti,omap4-mpu" for OMAP4 + Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" Examples: +- For an OMAP5 SMP system: + +mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu" +}; + - For an OMAP4 SMP system: mpu { -- cgit v0.10.2 From 21ea02686164a71f1d464835c602c3fe2a0f3d61 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 18 Nov 2013 11:28:07 -0200 Subject: Documentation: net: fsl-fec.txt: Add phy-supply entry phy-supply is an optional property of the fec driver, so add it to the binding documentation. Signed-off-by: Fabio Estevam Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index d536392..845ff84 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-supply: regulator that powers the Ethernet PHY. Example: @@ -25,4 +26,5 @@ ethernet@83fec000 { phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; }; -- cgit v0.10.2 From 53d6b36020c76b7d77514ec08394a75cb9deab08 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 18 Nov 2013 11:11:19 +0100 Subject: of: Add vendor prefix for LG Corporation Signed-off-by: Thierry Reding Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ce95ed1..e986fbe 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -38,6 +38,7 @@ ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. -- cgit v0.10.2 From cdbea09819fc5f2ad84f1ffa218999632f0857a7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 18 Nov 2013 12:46:12 +0100 Subject: clk: exynos: Fix typos in DT bindings documentation s/comptible/compatible/ Signed-off-by: Laurent Pinchart Reviewed-by: Sachin Kamat Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index c6bf8a6..a2ac2d9 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -6,7 +6,7 @@ SoC's in the Exynos4 family. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 24765c1..46f5c79 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index 32aa34e..458f347 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 4499e99..9955dc9 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC. Required Properties: -- comptible: should be "samsung,exynos5440-clock". +- compatible: should be "samsung,exynos5440-clock". - reg: physical base address of the controller and length of memory mapped region. -- cgit v0.10.2 From dd622d2506a63f0d9cf7b3beaad12f012308a39f Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Wed, 13 Nov 2013 18:59:09 +0800 Subject: of: add vendor prefix for GMT Adding Global Mixed-mode Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Wei Ni Acked-by: Stephen Warren Reviewed-by: Jean Delvare Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index e986fbe..edbb8d8 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -32,6 +32,7 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +gmt Global Mixed-mode Technology, Inc. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) -- cgit v0.10.2 From 1675088f8bc3f955e9bd31418a6b3319487f27bf Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Wed, 23 Oct 2013 10:44:50 +0900 Subject: hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv) This patch fix typo of property name from 'pullup-uV' to 'pullup-uv'. The ntc_thermistor.c use 'pullup-uv' when parsing dt data. Signed-off-by: Chanwoo Choi Reviewed-by: Jingoo Han Acked-by: Naveen Krishna Chatradhi Reviewed-by: Tomasz Figa Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 47ada1d..5d49f2b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -49,7 +49,7 @@ adc@12D10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { compatible = "ntc,ncp15wb473"; - pullup-uV = <1800000>; + pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; -- cgit v0.10.2 From 711fbdfbf2bc4827214a650afe3f64767a1aba16 Mon Sep 17 00:00:00 2001 From: Colin Leitner Date: Fri, 8 Nov 2013 22:53:11 +0100 Subject: USB: spcp8x5: correct handling of CS5 setting This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 4abac28..5b793c3 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty, } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - buf[1] |= SET_UART_FORMAT_SIZE_5; - break; - case CS6: - buf[1] |= SET_UART_FORMAT_SIZE_6; - break; - case CS7: - buf[1] |= SET_UART_FORMAT_SIZE_7; - break; - default: - case CS8: - buf[1] |= SET_UART_FORMAT_SIZE_8; - break; - } + switch (cflag & CSIZE) { + case CS5: + buf[1] |= SET_UART_FORMAT_SIZE_5; + break; + case CS6: + buf[1] |= SET_UART_FORMAT_SIZE_6; + break; + case CS7: + buf[1] |= SET_UART_FORMAT_SIZE_7; + break; + default: + case CS8: + buf[1] |= SET_UART_FORMAT_SIZE_8; + break; } /* Set Stop bit2 : 0:1bit 1:2bit */ -- cgit v0.10.2 From 78692cc3382e0603a47e1f2aaeffe0d99891994d Mon Sep 17 00:00:00 2001 From: Colin Leitner Date: Fri, 8 Nov 2013 22:52:34 +0100 Subject: USB: mos7840: correct handling of CS5 setting This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index e5bdd98..a69da83 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1813,25 +1813,25 @@ static void mos7840_change_port_settings(struct tty_struct *tty, iflag = tty->termios.c_iflag; /* Change the number of bits */ - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - lData = LCR_BITS_5; - break; + switch (cflag & CSIZE) { + case CS5: + lData = LCR_BITS_5; + break; - case CS6: - lData = LCR_BITS_6; - break; + case CS6: + lData = LCR_BITS_6; + break; - case CS7: - lData = LCR_BITS_7; - break; - default: - case CS8: - lData = LCR_BITS_8; - break; - } + case CS7: + lData = LCR_BITS_7; + break; + + default: + case CS8: + lData = LCR_BITS_8; + break; } + /* Change the Parity bit */ if (cflag & PARENB) { if (cflag & PARODD) { -- cgit v0.10.2 From 8704211f65a2106ba01b6ac9727cdaf9ca11594c Mon Sep 17 00:00:00 2001 From: Colin Leitner Date: Tue, 5 Nov 2013 18:02:34 +0100 Subject: USB: ftdi_sio: fixed handling of unsupported CSIZE setting FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would only report this limitation for CS6 to dmesg and fail to reflect this fact to tcgetattr. This patch reverts the unsupported CSIZE setting and reports the fact with less severance to dmesg for both CS5 and CS6. To test the patch it's sufficient to call stty -F /dev/ttyUSB0 cs5 which will succeed without the patch and report an error with the patch applied. As an additional fix this patch ensures that the control request will always include a data bit size. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9ced893..fb0d5374 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2123,6 +2123,20 @@ static void ftdi_set_termios(struct tty_struct *tty, termios->c_cflag |= CRTSCTS; } + /* + * All FTDI UART chips are limited to CS7/8. We won't pretend to + * support CS5/6 and revert the CSIZE setting instead. + */ + if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) { + dev_warn(ddev, "requested CSIZE setting not supported\n"); + + termios->c_cflag &= ~CSIZE; + if (old_termios) + termios->c_cflag |= old_termios->c_cflag & CSIZE; + else + termios->c_cflag |= CS8; + } + cflag = termios->c_cflag; if (!old_termios) @@ -2159,19 +2173,16 @@ no_skip: } else { urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; } - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS7: - urb_value |= 7; - dev_dbg(ddev, "Setting CS7\n"); - break; - case CS8: - urb_value |= 8; - dev_dbg(ddev, "Setting CS8\n"); - break; - default: - dev_err(ddev, "CSIZE was set but not CS7-CS8\n"); - } + switch (cflag & CSIZE) { + case CS7: + urb_value |= 7; + dev_dbg(ddev, "Setting CS7\n"); + break; + default: + case CS8: + urb_value |= 8; + dev_dbg(ddev, "Setting CS8\n"); + break; } /* This is needed by the break command since it uses the same command -- cgit v0.10.2 From a313249937820f8b1996133fc285efbd6aad2c5b Mon Sep 17 00:00:00 2001 From: Colin Leitner Date: Mon, 4 Nov 2013 19:40:43 +0100 Subject: USB: pl2303: fixed handling of CS5 setting This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a value of 0 and the CSIZE setting has been skipped altogether by the enclosing if. Tested on 3.11.6 and the scope shows the correct output after the fix has been applied. Tagged to be added to stable, because it fixes a user visible driver bug and is simple enough to backport easily. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1e6de4c..1e3318d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -361,23 +361,21 @@ static void pl2303_set_termios(struct tty_struct *tty, 0, 0, buf, 7, 100); dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); - if (C_CSIZE(tty)) { - switch (C_CSIZE(tty)) { - case CS5: - buf[6] = 5; - break; - case CS6: - buf[6] = 6; - break; - case CS7: - buf[6] = 7; - break; - default: - case CS8: - buf[6] = 8; - } - dev_dbg(&port->dev, "data bits = %d\n", buf[6]); + switch (C_CSIZE(tty)) { + case CS5: + buf[6] = 5; + break; + case CS6: + buf[6] = 6; + break; + case CS7: + buf[6] = 7; + break; + default: + case CS8: + buf[6] = 8; } + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); /* For reference buf[0]:buf[3] baud rate value */ pl2303_encode_baudrate(tty, port, &buf[0]); -- cgit v0.10.2 From 72d944ec7eeb195db96942d5a9f907a312e23313 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Nov 2013 15:37:55 -0700 Subject: ARM: tegra: delete nvidia,tegra20-spi.txt binding This binding shouldn't exist; Tegra20 has two forms of SPI controller that are documented separately in nvidia,tegra20-sflash.txt and nvidia,tegra20-slink.txt. Signed-off-by: Stephen Warren Reviewed-by: Thierry Reding Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt deleted file mode 100644 index 6b9e518..0000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 SPI device - -Required properties: -- compatible : should be "nvidia,tegra20-spi". -- gpios : should specify GPIOs used for chipselect. -- cgit v0.10.2 From 2c0e641a963d073d60cb63c24614c642b6f64b21 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Thu, 21 Nov 2013 09:41:44 +0100 Subject: dt: binding: reword PowerPC 8xxx GPIO documentation re-format and re-word the device tree binding documentation for MPC8xxx and compatibles, reference the common document for interrupt controllers and remove outdated duplicate SoC specific information Cc: Mark Rutland Cc: Rob Herring Cc: Pawel Moll Cc: Arnd Bergmann Cc: Acked-by: Arnd Bergmann Signed-off-by: Gerhard Sittig Signed-off-by: Rob Herring diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt index b0019eb..798cfc9 100644 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on Every GPIO controller node must have #gpio-cells property defined, this information will be used to translate gpio-specifiers. +See bindings/gpio/gpio.txt for details of how to specify GPIO +information for devices. + +The GPIO module usually is connected to the SoC's internal interrupt +controller, see bindings/interrupt-controller/interrupts.txt (the +interrupt client nodes section) for details how to specify this GPIO +module's interrupt. + +The GPIO module may serve as another interrupt controller (cascaded to +the SoC's internal interrupt controller). See the interrupt controller +nodes section in bindings/interrupt-controller/interrupts.txt for +details. Required properties: -- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. +- compatible: "fsl,-gpio" followed by "fsl,mpc8349-gpio" + for 83xx, "fsl,mpc8572-gpio" for 85xx, or + "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells: Should be two. The first cell is the pin number + and the second cell is used to specify optional + parameters (currently unused). +- interrupt-parent: Phandle for the interrupt controller that + services interrupts for this device. +- interrupts: Interrupt mapping for GPIO IRQ. +- gpio-controller: Marks the port as GPIO controller. + +Optional properties: +- interrupt-controller: Empty boolean property which marks the GPIO + module as an IRQ controller. +- #interrupt-cells: Should be two. Defines the number of integer + cells required to specify an interrupt within + this interrupt controller. The first cell + defines the pin number, the second cell + defines additional flags (trigger type, + trigger polarity). Note that the available + set of trigger conditions supported by the + GPIO module depends on the actual SoC. Example of gpio-controller nodes for a MPC8347 SoC: @@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC: #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xc00 0x100>; - interrupts = <74 0x8>; interrupt-parent = <&ipic>; + interrupts = <74 0x8>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio-controller@d00 { #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xd00 0x100>; - interrupts = <75 0x8>; interrupt-parent = <&ipic>; + interrupts = <75 0x8>; gpio-controller; }; -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = , where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: +Example of a peripheral using the GPIO module as an IRQ controller: funkyfpga@0 { compatible = "funky-fpga"; ... - interrupts = <4 3>; interrupt-parent = <&gpio1>; + interrupts = <4 3>; }; -- cgit v0.10.2 From d59915d0655c5864b514f21daaeac98c047875dc Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 2 Dec 2013 18:06:20 +0800 Subject: ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek) By trial and error, I found this patch could work around an issue where the headset mic would stop working if you switch between the internal mic and the headset mic, and the internal mic was muted. It still takes a second or two before the headset mic actually starts working, but still better than nothing. Information update from Kailang: The verb was ADC digital mute(bit 6 default 1). Switch internal mic and headset mic will run alc_headset_mode_default. The coef index 0x11 will set to 0x0041. Because headset mode was fixed type. It doesn't need to run alc_determine_headset_type. So, the value still keep 0x0041. ADC was muted. BugLink: https://bugs.launchpad.net/bugs/1256840 Signed-off-by: David Henningsson Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9ca8300..1ad079c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3287,6 +3287,7 @@ static void alc_headset_mode_ctia(struct hda_codec *codec) alc_write_coef_idx(codec, 0x18, 0x7388); break; case 0x10ec0668: + alc_write_coef_idx(codec, 0x11, 0x0001); alc_write_coef_idx(codec, 0x15, 0x0d60); alc_write_coef_idx(codec, 0xc3, 0x0000); break; @@ -3315,6 +3316,7 @@ static void alc_headset_mode_omtp(struct hda_codec *codec) alc_write_coef_idx(codec, 0x18, 0x7388); break; case 0x10ec0668: + alc_write_coef_idx(codec, 0x11, 0x0001); alc_write_coef_idx(codec, 0x15, 0x0d50); alc_write_coef_idx(codec, 0xc3, 0x0000); break; -- cgit v0.10.2 From 0202e99c6910b9908808485c6858e8d475d052dd Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Mon, 2 Dec 2013 15:20:15 +0800 Subject: ALSA: hda/realtek - Independent of model for HP Create single model for HP. The headset jack module was difference between other chrome book. It need to manual control Mic jack detect. Chrome OS loaded driver by models. Remove old assigned fixup table from ALC269 fixup list entry. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1ad079c..ba2b982 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3602,11 +3602,6 @@ static void alc283_hp_automute_hook(struct hda_codec *codec, vref); } -static void alc283_chromebook_caps(struct hda_codec *codec) -{ - snd_hda_override_wcaps(codec, 0x03, 0); -} - static void alc283_fixup_chromebook(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -3615,19 +3610,34 @@ static void alc283_fixup_chromebook(struct hda_codec *codec, switch (action) { case HDA_FIXUP_ACT_PRE_PROBE: - alc283_chromebook_caps(codec); + snd_hda_override_wcaps(codec, 0x03, 0); /* Disable AA-loopback as it causes white noise */ spec->gen.mixer_nid = 0; spec->gen.hp_automute_hook = alc283_hp_automute_hook; break; case HDA_FIXUP_ACT_INIT: + /* Enable Line1 input control by verb */ + val = alc_read_coef_idx(codec, 0x1a); + alc_write_coef_idx(codec, 0x1a, val | (1 << 4)); + break; + } +} + +static void alc283_fixup_sense_combo_jack(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + int val; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + spec->gen.hp_automute_hook = alc283_hp_automute_hook; + break; + case HDA_FIXUP_ACT_INIT: /* MIC2-VREF control */ /* Set to manual mode */ val = alc_read_coef_idx(codec, 0x06); alc_write_coef_idx(codec, 0x06, val & ~0x000c); - /* Enable Line1 input control by verb */ - val = alc_read_coef_idx(codec, 0x1a); - alc_write_coef_idx(codec, 0x1a, val | (1 << 4)); break; } } @@ -3823,6 +3833,7 @@ enum { ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED, ALC269VB_FIXUP_ORDISSIMO_EVE2, ALC283_FIXUP_CHROME_BOOK, + ALC283_FIXUP_SENSE_COMBO_JACK, ALC282_FIXUP_ASUS_TX300, ALC283_FIXUP_INT_MIC, ALC290_FIXUP_MONO_SPEAKERS, @@ -4122,6 +4133,12 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc283_fixup_chromebook, }, + [ALC283_FIXUP_SENSE_COMBO_JACK] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc283_fixup_sense_combo_jack, + .chained = true, + .chain_id = ALC283_FIXUP_CHROME_BOOK, + }, [ALC282_FIXUP_ASUS_TX300] = { .type = HDA_FIXUP_FUNC, .v.func = alc282_fixup_asus_tx300, @@ -4213,7 +4230,6 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1973, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x1983, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x218b, "HP", ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED), - SND_PCI_QUIRK(0x103c, 0x21ed, "HP Falco Chromebook", ALC283_FIXUP_CHROME_BOOK), SND_PCI_QUIRK_VENDOR(0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), @@ -4321,6 +4337,8 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, {.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"}, + {.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-chrome"}, + {.id = ALC283_FIXUP_SENSE_COMBO_JACK, .name = "alc283-sense-combo"}, {} }; -- cgit v0.10.2 From 37826519c4dca037bda5d008b4d687c2e6f8d405 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Nov 2013 12:30:37 +0100 Subject: drm/tegra: Make CRTC upcasting safer When upcasting a NULL CRTC object, propagate the NULL pointer instead of some invalid pointer. This allows subsequent code to check that the cast object is valid. Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/drm.h b/drivers/gpu/drm/tegra/drm.h index fdfe259..7da0b92 100644 --- a/drivers/gpu/drm/tegra/drm.h +++ b/drivers/gpu/drm/tegra/drm.h @@ -116,7 +116,7 @@ host1x_client_to_dc(struct host1x_client *client) static inline struct tegra_dc *to_tegra_dc(struct drm_crtc *crtc) { - return container_of(crtc, struct tegra_dc, base); + return crtc ? container_of(crtc, struct tegra_dc, base) : NULL; } static inline void tegra_dc_writel(struct tegra_dc *dc, unsigned long value, -- cgit v0.10.2 From 7602fa1d29f5c4e92d6a36e79000a0f55c317a32 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 30 Oct 2013 09:55:33 +0100 Subject: drm/tegra: Tightly bind RGB output to DC Previously the association to a DC was done via the encoder's .crtc field. That has the disadvantage that when an encoder is detached from its CRTC, that field is set to NULL, leading to situations where it is impossible to access the DC registers required by the RGB output. However, the coupling between DC and RGB output is really fixed on Tegra. While they can be detached logically in DRM, the RGB output can rely on the DC's existence. Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c index ba47ca4..3b29018 100644 --- a/drivers/gpu/drm/tegra/rgb.c +++ b/drivers/gpu/drm/tegra/rgb.c @@ -14,6 +14,8 @@ struct tegra_rgb { struct tegra_output output; + struct tegra_dc *dc; + struct clk *clk_parent; struct clk *clk; }; @@ -84,18 +86,18 @@ static void tegra_dc_write_regs(struct tegra_dc *dc, static int tegra_output_rgb_enable(struct tegra_output *output) { - struct tegra_dc *dc = to_tegra_dc(output->encoder.crtc); + struct tegra_rgb *rgb = to_rgb(output); - tegra_dc_write_regs(dc, rgb_enable, ARRAY_SIZE(rgb_enable)); + tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); return 0; } static int tegra_output_rgb_disable(struct tegra_output *output) { - struct tegra_dc *dc = to_tegra_dc(output->encoder.crtc); + struct tegra_rgb *rgb = to_rgb(output); - tegra_dc_write_regs(dc, rgb_disable, ARRAY_SIZE(rgb_disable)); + tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); return 0; } @@ -146,6 +148,7 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc) rgb->output.dev = dc->dev; rgb->output.of_node = np; + rgb->dc = dc; err = tegra_output_probe(&rgb->output); if (err < 0) -- cgit v0.10.2 From a7ed68fcc73fd91acc0502b88e44a69f78864d89 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Nov 2013 13:15:43 +0100 Subject: drm/tegra: Fix address space mismatches sparse complains because __user annotations aren't placed consistently. Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 28e1781..56b29c3 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -135,11 +135,11 @@ int tegra_drm_submit(struct tegra_drm_context *context, unsigned int num_relocs = args->num_relocs; unsigned int num_waitchks = args->num_waitchks; struct drm_tegra_cmdbuf __user *cmdbufs = - (void * __user)(uintptr_t)args->cmdbufs; + (void __user *)(uintptr_t)args->cmdbufs; struct drm_tegra_reloc __user *relocs = - (void * __user)(uintptr_t)args->relocs; + (void __user *)(uintptr_t)args->relocs; struct drm_tegra_waitchk __user *waitchks = - (void * __user)(uintptr_t)args->waitchks; + (void __user *)(uintptr_t)args->waitchks; struct drm_tegra_syncpt syncpt; struct host1x_job *job; int err; @@ -204,7 +204,7 @@ int tegra_drm_submit(struct tegra_drm_context *context, if (err) goto fail; - err = copy_from_user(&syncpt, (void * __user)(uintptr_t)args->syncpts, + err = copy_from_user(&syncpt, (void __user *)(uintptr_t)args->syncpts, sizeof(syncpt)); if (err) goto fail; -- cgit v0.10.2 From 9b57f5f2c53e1fb2394587fe61af38a2a52e3508 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Nov 2013 13:17:14 +0100 Subject: drm/tegra: Make tegra_drm_driver static There is no need to access it from other files now that the driver has been decoupled from host1x. Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 56b29c3..db91636 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -573,7 +573,7 @@ static void tegra_debugfs_cleanup(struct drm_minor *minor) } #endif -struct drm_driver tegra_drm_driver = { +static struct drm_driver tegra_drm_driver = { .driver_features = DRIVER_MODESET | DRIVER_GEM, .load = tegra_drm_load, .unload = tegra_drm_unload, -- cgit v0.10.2 From 9ab34151a9aab94685a8ce4b030800151f2bca66 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Nov 2013 13:18:14 +0100 Subject: drm/tegra: Force cast to __iomem to make sparse happy The fbdev screen memory pointer is annotated __iomem, so cast the kernel virtual address to that address space to make the warning go away. Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c index 490f771..a3835e7 100644 --- a/drivers/gpu/drm/tegra/fb.c +++ b/drivers/gpu/drm/tegra/fb.c @@ -247,7 +247,7 @@ static int tegra_fbdev_probe(struct drm_fb_helper *helper, info->var.yoffset * fb->pitches[0]; drm->mode_config.fb_base = (resource_size_t)bo->paddr; - info->screen_base = bo->vaddr + offset; + info->screen_base = (void __iomem *)bo->vaddr + offset; info->screen_size = size; info->fix.smem_start = (unsigned long)(bo->paddr + offset); info->fix.smem_len = size; -- cgit v0.10.2 From d24b2898ceea603864c6d12540d6768edcc9cd40 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Nov 2013 13:20:23 +0100 Subject: gpu: host1x: Fix a few sparse warnings Include the bus.h header, so that various function declarations are visible in the source file that implements those functions. This keeps sparse from suggesting that they should be made static. Make the host1x_bus_type variable static since it isn't used globally. Finally replace the slightly unsafe dev_set_name(dev, name) by the more secure dev_set_name(dev, "%s", name). Signed-off-by: Thierry Reding diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c index 509383f..6a92959 100644 --- a/drivers/gpu/host1x/bus.c +++ b/drivers/gpu/host1x/bus.c @@ -19,6 +19,7 @@ #include #include +#include "bus.h" #include "dev.h" static DEFINE_MUTEX(clients_lock); @@ -257,7 +258,7 @@ static int host1x_unregister_client(struct host1x *host1x, return -ENODEV; } -struct bus_type host1x_bus_type = { +static struct bus_type host1x_bus_type = { .name = "host1x", }; @@ -301,7 +302,7 @@ static int host1x_device_add(struct host1x *host1x, device->dev.coherent_dma_mask = host1x->dev->coherent_dma_mask; device->dev.dma_mask = &device->dev.coherent_dma_mask; device->dev.release = host1x_device_release; - dev_set_name(&device->dev, driver->name); + dev_set_name(&device->dev, "%s", driver->name); device->dev.bus = &host1x_bus_type; device->dev.parent = host1x->dev; -- cgit v0.10.2 From 9a991600e379641b9c16310b87ca848b6da01c24 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Nov 2013 13:07:37 +0300 Subject: drm/tegra: return -EFAULT if copy_from_user() fails copy_from_user() returns the number of bytes remaining if it fails, but we want to return -EFAULT here. Signed-off-by: Dan Carpenter Signed-off-by: Thierry Reding diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index db91636..07eba59 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -163,9 +163,10 @@ int tegra_drm_submit(struct tegra_drm_context *context, struct drm_tegra_cmdbuf cmdbuf; struct host1x_bo *bo; - err = copy_from_user(&cmdbuf, cmdbufs, sizeof(cmdbuf)); - if (err) + if (copy_from_user(&cmdbuf, cmdbufs, sizeof(cmdbuf))) { + err = -EFAULT; goto fail; + } bo = host1x_bo_lookup(drm, file, cmdbuf.handle); if (!bo) { @@ -178,10 +179,11 @@ int tegra_drm_submit(struct tegra_drm_context *context, cmdbufs++; } - err = copy_from_user(job->relocarray, relocs, - sizeof(*relocs) * num_relocs); - if (err) + if (copy_from_user(job->relocarray, relocs, + sizeof(*relocs) * num_relocs)) { + err = -EFAULT; goto fail; + } while (num_relocs--) { struct host1x_reloc *reloc = &job->relocarray[num_relocs]; @@ -199,15 +201,17 @@ int tegra_drm_submit(struct tegra_drm_context *context, } } - err = copy_from_user(job->waitchk, waitchks, - sizeof(*waitchks) * num_waitchks); - if (err) + if (copy_from_user(job->waitchk, waitchks, + sizeof(*waitchks) * num_waitchks)) { + err = -EFAULT; goto fail; + } - err = copy_from_user(&syncpt, (void __user *)(uintptr_t)args->syncpts, - sizeof(syncpt)); - if (err) + if (copy_from_user(&syncpt, (void __user *)(uintptr_t)args->syncpts, + sizeof(syncpt))) { + err = -EFAULT; goto fail; + } job->is_addr_reg = context->client->ops->is_addr_reg; job->syncpt_incrs = syncpt.incrs; -- cgit v0.10.2 From 5d27619498ab468e8c7e67844c640ad0915e8d85 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 28 Nov 2013 16:20:03 +0100 Subject: sh-pfc: r8a7740: Fix pin bias setup When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c index 009174d..bc5eb45 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c @@ -3720,7 +3720,7 @@ static void __iomem *r8a7740_pinmux_portcr(struct sh_pfc *pfc, unsigned int pin) const struct r8a7740_portcr_group *group = &r8a7740_portcr_offsets[i]; - if (i <= group->end_pin) + if (pin <= group->end_pin) return pfc->window->virt + group->offset + pin; } -- cgit v0.10.2 From 71493de7e55af589dbe76ce78ae2b762f9cc6f27 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 28 Nov 2013 16:20:04 +0100 Subject: sh-pfc: sh7372: Fix pin bias setup When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7372.c b/drivers/pinctrl/sh-pfc/pfc-sh7372.c index 70b522d..cc097b6 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7372.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7372.c @@ -2584,7 +2584,7 @@ static void __iomem *sh7372_pinmux_portcr(struct sh_pfc *pfc, unsigned int pin) const struct sh7372_portcr_group *group = &sh7372_portcr_offsets[i]; - if (i <= group->end_pin) + if (pin <= group->end_pin) return pfc->window->virt + group->offset + pin; } -- cgit v0.10.2 From c9a9972b6f093e4e2f81f58892a7523df894144d Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Mon, 25 Nov 2013 18:34:24 +0900 Subject: gpiolib: add missing declarations Add declaration of 'struct of_phandle_args' to avoid the following warning: In file included from arch/arm/mach-tegra/board-paz00.c:21:0: include/linux/gpio/driver.h:102:17: warning: 'struct of_phandle_args' declared inside parameter list include/linux/gpio/driver.h:102:17: warning: its scope is only this definition or declaration, which is probably not what you want Also proactively add other definitions/includes that could be missing in other contexts. Signed-off-by: Alexandre Courbot Reported-by: Stephen Warren Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 82eac61..3ea2cf6 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -2,9 +2,12 @@ #define __LINUX_GPIO_DRIVER_H #include +#include struct device; struct gpio_desc; +struct of_phandle_args; +struct device_node; struct seq_file; /** -- cgit v0.10.2 From 7cc67b9c74d9728ba6cbf868d7bcd2cc24de0880 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 23 Nov 2013 14:55:52 +0900 Subject: gpiolib: fix lookup of platform-mapped GPIOs A typo resulted in GPIO lookup failing unconditionally. Signed-off-by: Alexandre Courbot Reported-by: Stephen Warren Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index ac53a95..b73c39f 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2368,7 +2368,7 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, continue; } - if (chip->ngpio >= p->chip_hwnum) { + if (chip->ngpio <= p->chip_hwnum) { dev_warn(dev, "GPIO chip %s has %d GPIOs\n", chip->label, chip->ngpio); continue; -- cgit v0.10.2 From 56a39aac593a7e855bed357b1ce43eeb7a99e7e2 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 23 Nov 2013 19:32:20 +0900 Subject: Documentation: gpiolib: add 00-INDEX file Give a short overview of the various GPIO documentation files. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX new file mode 100644 index 0000000..1de43ae --- /dev/null +++ b/Documentation/gpio/00-INDEX @@ -0,0 +1,14 @@ +00-INDEX + - This file +gpio.txt + - Introduction to GPIOs and their kernel interfaces +consumer.txt + - How to obtain and use GPIOs in a driver +driver.txt + - How to write a GPIO driver +board.txt + - How to assign GPIOs to a consumer device and a function +sysfs.txt + - Information about the GPIO sysfs interface +gpio-legacy.txt + - Historical documentation of the deprecated GPIO integer interface -- cgit v0.10.2 From 35c5d7fdc4eed4409f9193bf7651315849cc6aa3 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 23 Nov 2013 19:34:50 +0900 Subject: gpiolib: use platform GPIO mappings as fallback For platforms that use device tree or ACPI as the standard way to look GPIOs up, allow the platform-defined GPIO mappings to be used as a fallback. This may be useful for platforms that need extra GPIOs mappings not defined by the firmware. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index b73c39f..dbddace 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2418,7 +2418,7 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, const char *con_id, unsigned int idx) { - struct gpio_desc *desc; + struct gpio_desc *desc = NULL; int status; enum gpio_lookup_flags flags = 0; @@ -2431,9 +2431,19 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, } else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev)) { dev_dbg(dev, "using ACPI for GPIO lookup\n"); desc = acpi_find_gpio(dev, con_id, idx, &flags); - } else { + } + + /* + * Either we are not using DT or ACPI, or their lookup did not return + * a result. In that case, use platform lookup as a fallback. + */ + if (!desc || IS_ERR(desc)) { + struct gpio_desc *pdesc; dev_dbg(dev, "using lookup tables for GPIO lookup"); - desc = gpiod_find(dev, con_id, idx, &flags); + pdesc = gpiod_find(dev, con_id, idx, &flags); + /* If used as fallback, do not replace the previous error */ + if (!IS_ERR(pdesc) || !desc) + desc = pdesc; } if (IS_ERR(desc)) { -- cgit v0.10.2 From 1aeef303b5d9e243c41d5b80f8bb059366514a10 Mon Sep 17 00:00:00 2001 From: Liu Gang Date: Fri, 22 Nov 2013 16:12:40 +0800 Subject: powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536 For MPC8572/MPC8536, the status of GPIOs defined as output cannot be determined by reading GPDAT register, so the code use shadow data register instead. But the code may give the wrong status of GPIOs defined as input under some scenarios: 1. If some pins were configured as inputs and were asserted high before booting the kernel, the shadow data has been initialized with those pin values. 2. Some pins have been configured as output first and have been set to the high value, then reconfigured as input. The above cases will make the shadow data for those input pins to be set to high. Then reading the pin status will always return high even if the actual pin status is low. The code should eliminate the effects of the shadow data to the input pins, and the status of those pins should be read directly from GPDAT. Cc: stable@vger.kernel.org Acked-by: Scott Wood Acked-by: Anatolij Gustschin Signed-off-by: Liu Gang Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 914e859..d7d6d72 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -70,10 +70,14 @@ static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio) u32 val; struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + u32 out_mask, out_shadow; - val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR); + out_mask = in_be32(mm->regs + GPIO_DIR); - return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio); + val = in_be32(mm->regs + GPIO_DAT) & ~out_mask; + out_shadow = mpc8xxx_gc->data & out_mask; + + return (val | out_shadow) & mpc8xxx_gpio2mask(gpio); } static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) -- cgit v0.10.2 From 351cfe0fe810588bb1cc75fb4f1c1d1d01914b82 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 29 Nov 2013 15:47:34 +0200 Subject: gpiolib: change a warning to debug message when failing to get gpio It's the drivers responsibility to react on failure to get the gpio descriptors and not the frameworks. Since there are some common peripherals that may or may not have certain pins connected to gpio lines, depending on the platform, printing the warning there may end up generating useless bug reports. Signed-off-by: Heikki Krogerus Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index dbddace..85f772c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2447,7 +2447,7 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, } if (IS_ERR(desc)) { - dev_warn(dev, "lookup for GPIO %s failed\n", con_id); + dev_dbg(dev, "lookup for GPIO %s failed\n", con_id); return desc; } -- cgit v0.10.2 From 5b19f4f9bdb69d53f967b5733d6c3273d2397b9c Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 15 Nov 2013 08:20:45 +1000 Subject: drm/nv04-nv30/clk: provide an empty domain list Reported-by: Ilia Mirkin Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c index da50c1b..30c1f3a 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c @@ -69,6 +69,11 @@ nv04_clock_pll_prog(struct nouveau_clock *clk, u32 reg1, return 0; } +static struct nouveau_clocks +nv04_domain[] = { + { nv_clk_src_max } +}; + static int nv04_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nouveau_oclass *oclass, void *data, u32 size, @@ -77,7 +82,7 @@ nv04_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nv04_clock_priv *priv; int ret; - ret = nouveau_clock_create(parent, engine, oclass, NULL, &priv); + ret = nouveau_clock_create(parent, engine, oclass, nv04_domain, &priv); *pobject = nv_object(priv); if (ret) return ret; -- cgit v0.10.2 From 92e5b0a2b121c29eac31e6d8106ceefa31de46a9 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Fri, 15 Nov 2013 11:26:41 -0500 Subject: drm/nv10/plane: fix format computation Otherwise none of the format checks pass, since the width was still in 16.16 encoding. Signed-off-by: Ilia Mirkin Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/dispnv04/overlay.c b/drivers/gpu/drm/nouveau/dispnv04/overlay.c index 3618ac6..514a305 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/overlay.c +++ b/drivers/gpu/drm/nouveau/dispnv04/overlay.c @@ -99,10 +99,17 @@ nv10_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct nouveau_bo *cur = nv_plane->cur; bool flip = nv_plane->flip; - int format = ALIGN(src_w * 4, 0x100); int soff = NV_PCRTC0_SIZE * nv_crtc->index; int soff2 = NV_PCRTC0_SIZE * !nv_crtc->index; - int ret; + int format, ret; + + /* Source parameters given in 16.16 fixed point, ignore fractional. */ + src_x >>= 16; + src_y >>= 16; + src_w >>= 16; + src_h >>= 16; + + format = ALIGN(src_w * 4, 0x100); if (format > 0xffff) return -EINVAL; @@ -113,12 +120,6 @@ nv10_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, nv_plane->cur = nv_fb->nvbo; - /* Source parameters given in 16.16 fixed point, ignore fractional. */ - src_x = src_x >> 16; - src_y = src_y >> 16; - src_w = src_w >> 16; - src_h = src_h >> 16; - nv_mask(dev, NV_PCRTC_ENGINE_CTRL + soff, NV_CRTC_FSEL_OVERLAY, NV_CRTC_FSEL_OVERLAY); nv_mask(dev, NV_PCRTC_ENGINE_CTRL + soff2, NV_CRTC_FSEL_OVERLAY, 0); -- cgit v0.10.2 From 050828e9563d03cbaab950c16ae4aebaa02ff0de Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Fri, 15 Nov 2013 11:26:42 -0500 Subject: drm/nv10/plane: add downscaling restrictions Signed-off-by: Ilia Mirkin Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/dispnv04/overlay.c b/drivers/gpu/drm/nouveau/dispnv04/overlay.c index 514a305..c14afb7 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/overlay.c +++ b/drivers/gpu/drm/nouveau/dispnv04/overlay.c @@ -112,7 +112,15 @@ nv10_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, format = ALIGN(src_w * 4, 0x100); if (format > 0xffff) - return -EINVAL; + return -ERANGE; + + if (dev->chipset >= 0x30) { + if (crtc_w < (src_w >> 1) || crtc_h < (src_h >> 1)) + return -ERANGE; + } else { + if (crtc_w < (src_w >> 3) || crtc_h < (src_h >> 3)) + return -ERANGE; + } ret = nouveau_bo_pin(nv_fb->nvbo, TTM_PL_FLAG_VRAM); if (ret) -- cgit v0.10.2 From efffa9841cf42ae8350d421070cea962b063df8c Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Fri, 15 Nov 2013 11:26:43 -0500 Subject: drm/nv10/plane: some chipsets don't support NV12 Signed-off-by: Ilia Mirkin Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/dispnv04/overlay.c b/drivers/gpu/drm/nouveau/dispnv04/overlay.c index c14afb7..32e7064 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/overlay.c +++ b/drivers/gpu/drm/nouveau/dispnv04/overlay.c @@ -58,8 +58,8 @@ struct nouveau_plane { }; static uint32_t formats[] = { - DRM_FORMAT_NV12, DRM_FORMAT_UYVY, + DRM_FORMAT_NV12, }; /* Sine can be approximated with @@ -254,14 +254,25 @@ nv10_overlay_init(struct drm_device *device) { struct nouveau_device *dev = nouveau_dev(device); struct nouveau_plane *plane = kzalloc(sizeof(struct nouveau_plane), GFP_KERNEL); + int num_formats = ARRAY_SIZE(formats); int ret; if (!plane) return; + switch (dev->chipset) { + case 0x10: + case 0x11: + case 0x15: + case 0x1a: + case 0x20: + num_formats = 1; + break; + } + ret = drm_plane_init(device, &plane->base, 3 /* both crtc's */, &nv10_plane_funcs, - formats, ARRAY_SIZE(formats), false); + formats, num_formats, false); if (ret) goto err; -- cgit v0.10.2 From b1cd49763bb4b0dacb7795d1152cd4e6660ab7bc Mon Sep 17 00:00:00 2001 From: Roy Spliet Date: Sun, 17 Nov 2013 20:09:05 +0100 Subject: drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+ Signed-off-by: Roy Spliet Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c index 5f55578..e6352bd 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c @@ -33,6 +33,7 @@ #include #include +#include "nv04.h" #include "nv50.h" /******************************************************************************* @@ -460,6 +461,8 @@ nv50_fifo_ctor(struct nouveau_object *parent, struct nouveau_object *engine, nv_subdev(priv)->intr = nv04_fifo_intr; nv_engine(priv)->cclass = &nv50_fifo_cclass; nv_engine(priv)->sclass = nv50_fifo_sclass; + priv->base.pause = nv04_fifo_pause; + priv->base.start = nv04_fifo_start; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv84.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv84.c index 0908dc8..fe0f41e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv84.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv84.c @@ -35,6 +35,7 @@ #include #include +#include "nv04.h" #include "nv50.h" /******************************************************************************* @@ -432,6 +433,8 @@ nv84_fifo_ctor(struct nouveau_object *parent, struct nouveau_object *engine, nv_subdev(priv)->intr = nv04_fifo_intr; nv_engine(priv)->cclass = &nv84_fifo_cclass; nv_engine(priv)->sclass = nv84_fifo_sclass; + priv->base.pause = nv04_fifo_pause; + priv->base.start = nv04_fifo_start; return 0; } -- cgit v0.10.2 From a7e4201f0f7d47e03b851f06f8987856e8d33083 Mon Sep 17 00:00:00 2001 From: Roy Spliet Date: Sun, 17 Nov 2013 20:09:06 +0100 Subject: drm/nouveau/clk: Add support for NVAA/NVAC Signed-off-by: Roy Spliet Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile index edcf801..b3fa1ba 100644 --- a/drivers/gpu/drm/nouveau/Makefile +++ b/drivers/gpu/drm/nouveau/Makefile @@ -59,6 +59,7 @@ nouveau-y += core/subdev/clock/nv40.o nouveau-y += core/subdev/clock/nv50.o nouveau-y += core/subdev/clock/nv84.o nouveau-y += core/subdev/clock/nva3.o +nouveau-y += core/subdev/clock/nvaa.o nouveau-y += core/subdev/clock/nvc0.o nouveau-y += core/subdev/clock/nve0.o nouveau-y += core/subdev/clock/pllnv04.o diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nv50.c b/drivers/gpu/drm/nouveau/core/engine/device/nv50.c index db13982..db3fc7b 100644 --- a/drivers/gpu/drm/nouveau/core/engine/device/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/device/nv50.c @@ -283,7 +283,7 @@ nv50_identify(struct nouveau_device *device) device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass; device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass; device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass; - device->oclass[NVDEV_SUBDEV_CLOCK ] = nv84_clock_oclass; + device->oclass[NVDEV_SUBDEV_CLOCK ] = nvaa_clock_oclass; device->oclass[NVDEV_SUBDEV_THERM ] = &nv84_therm_oclass; device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; device->oclass[NVDEV_SUBDEV_DEVINIT] = &nv50_devinit_oclass; @@ -311,7 +311,7 @@ nv50_identify(struct nouveau_device *device) device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass; device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass; device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass; - device->oclass[NVDEV_SUBDEV_CLOCK ] = nv84_clock_oclass; + device->oclass[NVDEV_SUBDEV_CLOCK ] = nvaa_clock_oclass; device->oclass[NVDEV_SUBDEV_THERM ] = &nv84_therm_oclass; device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; device->oclass[NVDEV_SUBDEV_DEVINIT] = &nv50_devinit_oclass; diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h index e2675bc..8f4ced7 100644 --- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h +++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h @@ -14,6 +14,9 @@ enum nv_clk_src { nv_clk_src_hclk, nv_clk_src_hclkm3, nv_clk_src_hclkm3d2, + nv_clk_src_hclkm2d3, /* NVAA */ + nv_clk_src_hclkm4, /* NVAA */ + nv_clk_src_cclk, /* NVAA */ nv_clk_src_host, @@ -127,6 +130,7 @@ extern struct nouveau_oclass nv04_clock_oclass; extern struct nouveau_oclass nv40_clock_oclass; extern struct nouveau_oclass *nv50_clock_oclass; extern struct nouveau_oclass *nv84_clock_oclass; +extern struct nouveau_oclass *nvaa_clock_oclass; extern struct nouveau_oclass nva3_clock_oclass; extern struct nouveau_oclass nvc0_clock_oclass; extern struct nouveau_oclass nve0_clock_oclass; diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c new file mode 100644 index 0000000..7a723b4 --- /dev/null +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c @@ -0,0 +1,445 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +#include +#include +#include +#include +#include + +#include "pll.h" + +struct nvaa_clock_priv { + struct nouveau_clock base; + enum nv_clk_src csrc, ssrc, vsrc; + u32 cctrl, sctrl; + u32 ccoef, scoef; + u32 cpost, spost; + u32 vdiv; +}; + +static u32 +read_div(struct nouveau_clock *clk) +{ + return nv_rd32(clk, 0x004600); +} + +static u32 +read_pll(struct nouveau_clock *clk, u32 base) +{ + u32 ctrl = nv_rd32(clk, base + 0); + u32 coef = nv_rd32(clk, base + 4); + u32 ref = clk->read(clk, nv_clk_src_href); + u32 post_div = 0; + u32 clock = 0; + int N1, M1; + + switch (base){ + case 0x4020: + post_div = 1 << ((nv_rd32(clk, 0x4070) & 0x000f0000) >> 16); + break; + case 0x4028: + post_div = (nv_rd32(clk, 0x4040) & 0x000f0000) >> 16; + break; + default: + break; + } + + N1 = (coef & 0x0000ff00) >> 8; + M1 = (coef & 0x000000ff); + if ((ctrl & 0x80000000) && M1) { + clock = ref * N1 / M1; + clock = clock / post_div; + } + + return clock; +} + +static int +nvaa_clock_read(struct nouveau_clock *clk, enum nv_clk_src src) +{ + struct nvaa_clock_priv *priv = (void *)clk; + u32 mast = nv_rd32(clk, 0x00c054); + u32 P = 0; + + switch (src) { + case nv_clk_src_crystal: + return nv_device(priv)->crystal; + case nv_clk_src_href: + return 100000; /* PCIE reference clock */ + case nv_clk_src_hclkm4: + return clk->read(clk, nv_clk_src_href) * 4; + case nv_clk_src_hclkm2d3: + return clk->read(clk, nv_clk_src_href) * 2 / 3; + case nv_clk_src_host: + switch (mast & 0x000c0000) { + case 0x00000000: return clk->read(clk, nv_clk_src_hclkm2d3); + case 0x00040000: break; + case 0x00080000: return clk->read(clk, nv_clk_src_hclkm4); + case 0x000c0000: return clk->read(clk, nv_clk_src_cclk); + } + break; + case nv_clk_src_core: + P = (nv_rd32(clk, 0x004028) & 0x00070000) >> 16; + + switch (mast & 0x00000003) { + case 0x00000000: return clk->read(clk, nv_clk_src_crystal) >> P; + case 0x00000001: return 0; + case 0x00000002: return clk->read(clk, nv_clk_src_hclkm4) >> P; + case 0x00000003: return read_pll(clk, 0x004028) >> P; + } + break; + case nv_clk_src_cclk: + if ((mast & 0x03000000) != 0x03000000) + return clk->read(clk, nv_clk_src_core); + + if ((mast & 0x00000200) == 0x00000000) + return clk->read(clk, nv_clk_src_core); + + switch (mast & 0x00000c00) { + case 0x00000000: return clk->read(clk, nv_clk_src_href); + case 0x00000400: return clk->read(clk, nv_clk_src_hclkm4); + case 0x00000800: return clk->read(clk, nv_clk_src_hclkm2d3); + default: return 0; + } + case nv_clk_src_shader: + P = (nv_rd32(clk, 0x004020) & 0x00070000) >> 16; + switch (mast & 0x00000030) { + case 0x00000000: + if (mast & 0x00000040) + return clk->read(clk, nv_clk_src_href) >> P; + return clk->read(clk, nv_clk_src_crystal) >> P; + case 0x00000010: break; + case 0x00000020: return read_pll(clk, 0x004028) >> P; + case 0x00000030: return read_pll(clk, 0x004020) >> P; + } + break; + case nv_clk_src_mem: + return 0; + break; + case nv_clk_src_vdec: + P = (read_div(clk) & 0x00000700) >> 8; + + switch (mast & 0x00400000) { + case 0x00400000: + return clk->read(clk, nv_clk_src_core) >> P; + break; + default: + return 500000 >> P; + break; + } + break; + default: + break; + } + + nv_debug(priv, "unknown clock source %d 0x%08x\n", src, mast); + return 0; +} + +static u32 +calc_pll(struct nvaa_clock_priv *priv, u32 reg, + u32 clock, int *N, int *M, int *P) +{ + struct nouveau_bios *bios = nouveau_bios(priv); + struct nvbios_pll pll; + struct nouveau_clock *clk = &priv->base; + int ret; + + ret = nvbios_pll_parse(bios, reg, &pll); + if (ret) + return 0; + + pll.vco2.max_freq = 0; + pll.refclk = clk->read(clk, nv_clk_src_href); + if (!pll.refclk) + return 0; + + return nv04_pll_calc(nv_subdev(priv), &pll, clock, N, M, NULL, NULL, P); +} + +static inline u32 +calc_P(u32 src, u32 target, int *div) +{ + u32 clk0 = src, clk1 = src; + for (*div = 0; *div <= 7; (*div)++) { + if (clk0 <= target) { + clk1 = clk0 << (*div ? 1 : 0); + break; + } + clk0 >>= 1; + } + + if (target - clk0 <= clk1 - target) + return clk0; + (*div)--; + return clk1; +} + +static int +nvaa_clock_calc(struct nouveau_clock *clk, struct nouveau_cstate *cstate) +{ + struct nvaa_clock_priv *priv = (void *)clk; + const int shader = cstate->domain[nv_clk_src_shader]; + const int core = cstate->domain[nv_clk_src_core]; + const int vdec = cstate->domain[nv_clk_src_vdec]; + u32 out = 0, clock = 0; + int N, M, P1, P2 = 0; + int divs = 0; + + /* cclk: find suitable source, disable PLL if we can */ + if (core < clk->read(clk, nv_clk_src_hclkm4)) + out = calc_P(clk->read(clk, nv_clk_src_hclkm4), core, &divs); + + /* Calculate clock * 2, so shader clock can use it too */ + clock = calc_pll(priv, 0x4028, (core << 1), &N, &M, &P1); + + if (abs(core - out) <= + abs(core - (clock >> 1))) { + priv->csrc = nv_clk_src_hclkm4; + priv->cctrl = divs << 16; + } else { + /* NVCTRL is actually used _after_ NVPOST, and after what we + * call NVPLL. To make matters worse, NVPOST is an integer + * divider instead of a right-shift number. */ + if(P1 > 2) { + P2 = P1 - 2; + P1 = 2; + } + + priv->csrc = nv_clk_src_core; + priv->ccoef = (N << 8) | M; + + priv->cctrl = (P2 + 1) << 16; + priv->cpost = (1 << P1) << 16; + } + + /* sclk: nvpll + divisor, href or spll */ + out = 0; + if (shader == clk->read(clk, nv_clk_src_href)) { + priv->ssrc = nv_clk_src_href; + } else { + clock = calc_pll(priv, 0x4020, shader, &N, &M, &P1); + if (priv->csrc == nv_clk_src_core) { + out = calc_P((core << 1), shader, &divs); + } + + if (abs(shader - out) <= + abs(shader - clock) && + (divs + P2) <= 7) { + priv->ssrc = nv_clk_src_core; + priv->sctrl = (divs + P2) << 16; + } else { + priv->ssrc = nv_clk_src_shader; + priv->scoef = (N << 8) | M; + priv->sctrl = P1 << 16; + } + } + + /* vclk */ + out = calc_P(core, vdec, &divs); + clock = calc_P(500000, vdec, &P1); + if(abs(vdec - out) <= + abs(vdec - clock)) { + priv->vsrc = nv_clk_src_cclk; + priv->vdiv = divs << 16; + } else { + priv->vsrc = nv_clk_src_vdec; + priv->vdiv = P1 << 16; + } + + /* Print strategy! */ + nv_debug(priv, "nvpll: %08x %08x %08x\n", + priv->ccoef, priv->cpost, priv->cctrl); + nv_debug(priv, " spll: %08x %08x %08x\n", + priv->scoef, priv->spost, priv->sctrl); + nv_debug(priv, " vdiv: %08x\n", priv->vdiv); + if (priv->csrc == nv_clk_src_hclkm4) + nv_debug(priv, "core: hrefm4\n"); + else + nv_debug(priv, "core: nvpll\n"); + + if (priv->ssrc == nv_clk_src_hclkm4) + nv_debug(priv, "shader: hrefm4\n"); + else if (priv->ssrc == nv_clk_src_core) + nv_debug(priv, "shader: nvpll\n"); + else + nv_debug(priv, "shader: spll\n"); + + if (priv->vsrc == nv_clk_src_hclkm4) + nv_debug(priv, "vdec: 500MHz\n"); + else + nv_debug(priv, "vdec: core\n"); + + return 0; +} + +static int +nvaa_clock_prog(struct nouveau_clock *clk) +{ + struct nvaa_clock_priv *priv = (void *)clk; + struct nouveau_fifo *pfifo = nouveau_fifo(clk); + unsigned long flags; + u32 pllmask = 0, mast, ptherm_gate; + int ret = -EBUSY; + + /* halt and idle execution engines */ + ptherm_gate = nv_mask(clk, 0x020060, 0x00070000, 0x00000000); + nv_mask(clk, 0x002504, 0x00000001, 0x00000001); + /* Wait until the interrupt handler is finished */ + if (!nv_wait(clk, 0x000100, 0xffffffff, 0x00000000)) + goto resume; + + if (pfifo) + pfifo->pause(pfifo, &flags); + + if (!nv_wait(clk, 0x002504, 0x00000010, 0x00000010)) + goto resume; + if (!nv_wait(clk, 0x00251c, 0x0000003f, 0x0000003f)) + goto resume; + + /* First switch to safe clocks: href */ + mast = nv_mask(clk, 0xc054, 0x03400e70, 0x03400640); + mast &= ~0x00400e73; + mast |= 0x03000000; + + switch (priv->csrc) { + case nv_clk_src_hclkm4: + nv_mask(clk, 0x4028, 0x00070000, priv->cctrl); + mast |= 0x00000002; + break; + case nv_clk_src_core: + nv_wr32(clk, 0x402c, priv->ccoef); + nv_wr32(clk, 0x4028, 0x80000000 | priv->cctrl); + nv_wr32(clk, 0x4040, priv->cpost); + pllmask |= (0x3 << 8); + mast |= 0x00000003; + break; + default: + nv_warn(priv,"Reclocking failed: unknown core clock\n"); + goto resume; + } + + switch (priv->ssrc) { + case nv_clk_src_href: + nv_mask(clk, 0x4020, 0x00070000, 0x00000000); + /* mast |= 0x00000000; */ + break; + case nv_clk_src_core: + nv_mask(clk, 0x4020, 0x00070000, priv->sctrl); + mast |= 0x00000020; + break; + case nv_clk_src_shader: + nv_wr32(clk, 0x4024, priv->scoef); + nv_wr32(clk, 0x4020, 0x80000000 | priv->sctrl); + nv_wr32(clk, 0x4070, priv->spost); + pllmask |= (0x3 << 12); + mast |= 0x00000030; + break; + default: + nv_warn(priv,"Reclocking failed: unknown sclk clock\n"); + goto resume; + } + + if (!nv_wait(clk, 0x004080, pllmask, pllmask)) { + nv_warn(priv,"Reclocking failed: unstable PLLs\n"); + goto resume; + } + + switch (priv->vsrc) { + case nv_clk_src_cclk: + mast |= 0x00400000; + default: + nv_wr32(clk, 0x4600, priv->vdiv); + } + + nv_wr32(clk, 0xc054, mast); + ret = 0; + +resume: + if (pfifo) + pfifo->start(pfifo, &flags); + + nv_mask(clk, 0x002504, 0x00000001, 0x00000000); + nv_wr32(clk, 0x020060, ptherm_gate); + + /* Disable some PLLs and dividers when unused */ + if (priv->csrc != nv_clk_src_core) { + nv_wr32(clk, 0x4040, 0x00000000); + nv_mask(clk, 0x4028, 0x80000000, 0x00000000); + } + + if (priv->ssrc != nv_clk_src_shader) { + nv_wr32(clk, 0x4070, 0x00000000); + nv_mask(clk, 0x4020, 0x80000000, 0x00000000); + } + + return ret; +} + +static void +nvaa_clock_tidy(struct nouveau_clock *clk) +{ +} + +static struct nouveau_clocks +nvaa_domains[] = { + { nv_clk_src_crystal, 0xff }, + { nv_clk_src_href , 0xff }, + { nv_clk_src_core , 0xff, 0, "core", 1000 }, + { nv_clk_src_shader , 0xff, 0, "shader", 1000 }, + { nv_clk_src_vdec , 0xff, 0, "vdec", 1000 }, + { nv_clk_src_max } +}; + +static int +nvaa_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, + struct nouveau_oclass *oclass, void *data, u32 size, + struct nouveau_object **pobject) +{ + struct nvaa_clock_priv *priv; + int ret; + + ret = nouveau_clock_create(parent, engine, oclass, nvaa_domains, &priv); + *pobject = nv_object(priv); + if (ret) + return ret; + + priv->base.read = nvaa_clock_read; + priv->base.calc = nvaa_clock_calc; + priv->base.prog = nvaa_clock_prog; + priv->base.tidy = nvaa_clock_tidy; + return 0; +} + +struct nouveau_oclass * +nvaa_clock_oclass = &(struct nouveau_oclass) { + .handle = NV_SUBDEV(CLOCK, 0xaa), + .ofuncs = &(struct nouveau_ofuncs) { + .ctor = nvaa_clock_ctor, + .dtor = _nouveau_clock_dtor, + .init = _nouveau_clock_init, + .fini = _nouveau_clock_fini, + }, +}; -- cgit v0.10.2 From f074d733866628973eca0ddb0c534ef4561da9e0 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 20 Nov 2013 15:14:31 +1000 Subject: drm/nouveau/kms: send timestamp data for correct head in flip completion events Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 7809d92..acec774 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -701,7 +701,7 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head); if (s->event) - drm_send_vblank_event(dev, -1, s->event); + drm_send_vblank_event(dev, s->crtc, s->event); list_del(&s->head); if (ps) -- cgit v0.10.2 From 2fd04c81dc652689b104ab16eba26146dde5c43f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 21 Nov 2013 14:22:39 +1000 Subject: drm/nouveau: unreference fence after syncing Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index acec774..29c3efd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -608,6 +608,7 @@ nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, fence = nouveau_fence_ref(new_bo->bo.sync_obj); spin_unlock(&new_bo->bo.bdev->fence_lock); ret = nouveau_fence_sync(fence, chan); + nouveau_fence_unref(&fence); if (ret) return ret; -- cgit v0.10.2 From 13cd1a5511eb44a54187d91d4929a6592787a48b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 26 Nov 2013 12:33:36 +1000 Subject: drm/nouveau/sw: fix oops if gpu has its display block disabled Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/engine/software/nv50.c b/drivers/gpu/drm/nouveau/core/engine/software/nv50.c index b574dd4..5ce686e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/software/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/software/nv50.c @@ -176,7 +176,7 @@ nv50_software_context_ctor(struct nouveau_object *parent, if (ret) return ret; - chan->vblank.nr_event = pdisp->vblank->index_nr; + chan->vblank.nr_event = pdisp ? pdisp->vblank->index_nr : 0; chan->vblank.event = kzalloc(chan->vblank.nr_event * sizeof(*chan->vblank.event), GFP_KERNEL); if (!chan->vblank.event) -- cgit v0.10.2 From bdefc8cbdfc71ea73e0573dbd2d24c0a68232218 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Nov 2013 01:18:47 +0300 Subject: drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set() We should be taking the minimum here instead of the max. It could lead to a buffer overflow. Fixes: 438d99e3b175 ('drm/nvd0/disp: initial crtc object implementation') Signed-off-by: Dan Carpenter a/drm/nv50_display.c b/drm/nv50_display.c index f8e66c08b11a..4e384a2f99c3 100644 diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index f8e66c0..4e384a2 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -1265,7 +1265,7 @@ nv50_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t start, uint32_t size) { struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - u32 end = max(start + size, (u32)256); + u32 end = min_t(u32, start + size, 256); u32 i; for (i = start; i < end; i++) { -- cgit v0.10.2 From 2167e2399dc5e69c62db56d933e9c8cbe107620a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 3 Dec 2013 12:14:32 +0100 Subject: cpufreq: fix garbage kobjects on errors during suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is effectively a revert of commit 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume"), which enabled suspend/resume optimizations leaving the sysfs files in place. Errors during suspend/resume are not handled properly, leaving dead sysfs attributes in case of failures. There are are number of functions with special code for the "frozen" case, and all these need to also have special error handling. The problem is easy to demonstrate by making cpufreq_driver->init() or cpufreq_driver->get() fail during resume. The code is too complex for a simple fix, with split code paths in multiple blocks within a number of functions. It is therefore best to revert the patch enabling this code until the error handling is in place. Examples of problems resulting from resume errors: WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [] dump_stack+0x55/0x76 [] warn_slowpath_common+0x7c/0x96 [] ? sysfs_open_file+0x77/0x212 [] warn_slowpath_fmt+0x41/0x43 [] ? sysfs_get_active+0x6b/0x82 [] ? sysfs_open_file+0x32/0x212 [] sysfs_open_file+0x77/0x212 [] ? sysfs_schedule_callback+0x1ac/0x1ac [] do_dentry_open+0x17c/0x257 [] finish_open+0x41/0x4f [] do_last+0x80c/0x9ba [] ? inode_permission+0x40/0x42 [] path_openat+0x233/0x4a1 [] do_filp_open+0x35/0x85 [] ? __alloc_fd+0x172/0x184 [] do_sys_open+0x6b/0xfa [] SyS_openat+0xf/0x11 [] system_call_fastpath+0x16/0x1b The failure to restore cpufreq devices on cancelled hibernation is not a new bug. It is caused by the ACPI _PPC call failing unless the hibernate is completed. This makes the acpi_cpufreq driver fail its init. Previously, the cpufreq device could be restored by offlining the cpu temporarily. And as a complete hibernation cycle would do this, it would be automatically restored most of the time. But after commit 5302c3fb2e62 the leftover sysfs attributes will block any device add action. Therefore offlining and onlining CPU 1 will no longer restore the cpufreq object, and a complete suspend/resume cycle will replace it with garbage. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Cc: 3.12+ # 3.12+ Signed-off-by: Bjørn Mork Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 606224a..81e9d44 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2119,9 +2119,6 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb, dev = get_cpu_device(cpu); if (dev) { - if (action & CPU_TASKS_FROZEN) - frozen = true; - switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: __cpufreq_add_dev(dev, NULL, frozen); -- cgit v0.10.2 From 95f19f658ce177387345b51bd48fed7b9cd7d4e8 Mon Sep 17 00:00:00 2001 From: Amit Pundir Date: Fri, 15 Nov 2013 12:56:31 +0530 Subject: epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled Drop EPOLLWAKEUP from epoll events mask if CONFIG_PM_SLEEP is disabled. Signed-off-by: Amit Pundir Cc: John Stultz Cc: Alexander Viro Signed-off-by: Rafael J. Wysocki diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 79b65c3..8b5e258 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1852,8 +1852,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, goto error_tgt_fput; /* Check if EPOLLWAKEUP is allowed */ - if ((epds.events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND)) - epds.events &= ~EPOLLWAKEUP; + ep_take_care_of_epollwakeup(&epds); /* * We have to check that the file structure underneath the file descriptor diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h index 2c267bc..bc81fb2 100644 --- a/include/uapi/linux/eventpoll.h +++ b/include/uapi/linux/eventpoll.h @@ -61,5 +61,16 @@ struct epoll_event { __u64 data; } EPOLL_PACKED; - +#ifdef CONFIG_PM_SLEEP +static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev) +{ + if ((epev->events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND)) + epev->events &= ~EPOLLWAKEUP; +} +#else +static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev) +{ + epev->events &= ~EPOLLWAKEUP; +} +#endif #endif /* _UAPI_LINUX_EVENTPOLL_H */ -- cgit v0.10.2 From 22a08538dca5c0630226f1c0c58dccd12e463d22 Mon Sep 17 00:00:00 2001 From: Vijaya Mohan Guvva Date: Thu, 21 Nov 2013 01:37:49 -0800 Subject: [SCSI] bfa: Fix crash when symb name set for offline vport This patch fixes a crash when tried setting symbolic name for an offline vport through sysfs. Crash is due to uninitialized pointer lport->ns, which gets initialized only on linkup (port online). Signed-off-by: Vijaya Mohan Guvva Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h index 94d5d01..42bcb97 100644 --- a/drivers/scsi/bfa/bfa_fcs.h +++ b/drivers/scsi/bfa/bfa_fcs.h @@ -296,6 +296,7 @@ wwn_t bfa_fcs_lport_get_rport(struct bfa_fcs_lport_s *port, wwn_t wwn, struct bfa_fcs_lport_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t lpwwn); +void bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, char *symname); void bfa_fcs_lport_get_info(struct bfa_fcs_lport_s *port, struct bfa_lport_info_s *port_info); void bfa_fcs_lport_get_attr(struct bfa_fcs_lport_s *port, diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index 2f61a5a..f5e4e61 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -1097,6 +1097,17 @@ bfa_fcs_lport_init(struct bfa_fcs_lport_s *lport, bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE); } +void +bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, + char *symname) +{ + strcpy(port->port_cfg.sym_name.symname, symname); + + if (bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online)) + bfa_fcs_lport_ns_util_send_rspn_id( + BFA_FCS_GET_NS_FROM_PORT(port), NULL); +} + /* * fcs_lport_api */ @@ -5140,9 +5151,6 @@ bfa_fcs_lport_ns_util_send_rspn_id(void *cbarg, struct bfa_fcxp_s *fcxp_alloced) u8 *psymbl = &symbl[0]; int len; - if (!bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online)) - return; - /* Avoid sending RSPN in the following states. */ if (bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_offline) || bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_plogi_sending) || diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index e9a681d..40be670 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -593,11 +593,8 @@ bfad_im_vport_set_symbolic_name(struct fc_vport *fc_vport) return; spin_lock_irqsave(&bfad->bfad_lock, flags); - if (strlen(sym_name) > 0) { - strcpy(fcs_vport->lport.port_cfg.sym_name.symname, sym_name); - bfa_fcs_lport_ns_util_send_rspn_id( - BFA_FCS_GET_NS_FROM_PORT((&fcs_vport->lport)), NULL); - } + if (strlen(sym_name) > 0) + bfa_fcs_lport_set_symname(&fcs_vport->lport, sym_name); spin_unlock_irqrestore(&bfad->bfad_lock, flags); } -- cgit v0.10.2 From b4af6ef99a60c5b56df137d7accd81ba1ee1254e Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Tue, 3 Dec 2013 18:04:54 +0800 Subject: ASoC: wm8731: fix dsp mode configuration According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by: Bo Shen Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 456bb8c..bc7472c 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -447,10 +447,10 @@ static int wm8731_set_dai_fmt(struct snd_soc_dai *codec_dai, iface |= 0x0001; break; case SND_SOC_DAIFMT_DSP_A: - iface |= 0x0003; + iface |= 0x0013; break; case SND_SOC_DAIFMT_DSP_B: - iface |= 0x0013; + iface |= 0x0003; break; default: return -EINVAL; -- cgit v0.10.2 From 559c71fe5dc3bf2ecc55afb336145db7f0abf810 Mon Sep 17 00:00:00 2001 From: Ivaylo Dimitrov Date: Mon, 2 Dec 2013 22:00:16 +0200 Subject: Staging: TIDSPBRIDGE: Use vm_iomap_memory for mmap-ing instead of remap_pfn_range This fixes the following bug: ---- Bug Report ---- source file: drivers/staging/tidspbridge/rmgr/drv_interface.c issue : mapping of physical memory without address range checks 259 static int bridge_mmap(struct file *filp, struct vm_area_struct *vma) 260 { 261 u32 status; 262 263 /* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */ 264 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); 265 266 dev_dbg(bridge, "%s: vm filp %p start %lx end %lx page_prot %ulx " 267 "flags %lx\n", __func__, filp, 268 vma->vm_start, vma->vm_end, vma->vm_page_prot, 269 vma->vm_flags); 270 271 status = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, 272 vma->vm_end - vma->vm_start, 273 vma->vm_page_prot); 274 if (status != 0) 275 status = -EAGAIN; 276 277 return status; 278 } The function provides an interface to remap physical memory to user space, but does not provide any checks to ensure that the memory is within the region that should be accessible. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Ivaylo Dimitrov Signed-off-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index 1aa4a3f..56e355b 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -258,7 +258,8 @@ err: /* This function maps kernel space memory to user space memory. */ static int bridge_mmap(struct file *filp, struct vm_area_struct *vma) { - u32 status; + struct omap_dsp_platform_data *pdata = + omap_dspbridge_dev->dev.platform_data; /* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); @@ -268,13 +269,9 @@ static int bridge_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_start, vma->vm_end, vma->vm_page_prot, vma->vm_flags); - status = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); - if (status != 0) - status = -EAGAIN; - - return status; + return vm_iomap_memory(vma, + pdata->phys_mempool_base, + pdata->phys_mempool_size); } static const struct file_operations bridge_fops = { -- cgit v0.10.2 From eee52f9edd0ff0a1e65a6fed836c7dbaeded7355 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 2 Dec 2013 15:43:48 -0800 Subject: USB: switch maintainership of chipidea to Peter Alexander isn't able to maintain the Chipidea code anymore, and as Peter has been acting as the de-facto maintainer anyway, make it official. Acked-by: Alexander Shishkin Acked-by: Peter Chen Acked-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 8285ed4..ee3fda6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2137,7 +2137,8 @@ S: Maintained F: Documentation/zh_CN/ CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER -M: Alexander Shishkin +M: Peter Chen +T: git://github.com/hzpeterchen/linux-usb.git L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ -- cgit v0.10.2 From 0dfee674b33fd87be4879a2b2d33a2fc22449814 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 2 Dec 2013 00:15:29 -0800 Subject: ARM: multi_v7_defconfig: enable network for BeagleBone Black BeagleBone Black uses the TI CPSW ethernet controller, enable it in the multi_v7_defconfig for testing coverage purposes. Signed-off-by: Olof Johansson Acked-by: Tony Lindgren Cc: stable@vger.kernel.org # v3.12 diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4a5903e..d30507d 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -69,6 +69,7 @@ CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y +CONFIG_TI_CPSW=y CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y -- cgit v0.10.2 From 610ffd58dbbccaf7a6e0fe85c5a345200466adc2 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 2 Dec 2013 18:40:50 -0800 Subject: ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index d57a85b..3e2259b 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -12,6 +12,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_PRINTK_TIME=y -- cgit v0.10.2 From f39918eec72c841037f16475867dac1a2b0bfc01 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 3 Dec 2013 10:21:49 -0800 Subject: ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson Cc: stable@vger.kernel.org # v3.12 diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index d30507d..c1df4e9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -134,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y -- cgit v0.10.2 From 813e8e3d6aaa0b511126cce15c16a931afffe768 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 3 Dec 2013 10:59:58 -0500 Subject: cpuidle: Check for dev before deregistering it. If not, we could end up in the unfortunate situation where we dereference a NULL pointer b/c we have cpuidle disabled. This is the case when booting under Xen (which uses the ACPI P/C states but disables the CPU idle driver) - and can be easily reproduced when booting with cpuidle.off=1. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] cpuidle_unregister_device+0x2a/0x90 .. snip.. Call Trace: [] acpi_processor_power_exit+0x3c/0x5c [] acpi_processor_stop+0x61/0xb6 [] __device_release_driver+0fffff81421653>] device_release_driver+0x23/0x30 [] bus_remove_device+0x108/0x180 [] device_del+0x129/0x1c0 [] ? unregister_xenbus_watch+0x1f0/0x1f0 [] device_unregister+0x1e/0x60 [] unregister_cpu+0x39/0x60 [] arch_unregister_cpu+0x23/0x30 [] handle_vcpu_hotplug_event+0xc1/0xe0 [] xenwatch_thread+0x45/0x120 [] ? abort_exclusive_wait+0xb0/0xb0 [] kthread+0xd2/0xf0 [] ? kthread_create_on_node+0x180/0x180 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x180/0x180 This problem also appears in 3.12 and could be a candidate for backport. Signed-off-by: Konrad Rzeszutek Wilk Cc: All applicable Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 2a991e4..a55e68f 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(cpuidle_register_device); */ void cpuidle_unregister_device(struct cpuidle_device *dev) { - if (dev->registered == 0) + if (!dev || dev->registered == 0) return; cpuidle_pause_and_lock(); -- cgit v0.10.2 From 959a35f13eb785f982d79b1aaa75872d05c821da Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 3 Dec 2013 14:23:00 -0700 Subject: blk-mq: fix dereference of rq->mq_ctx if allocation fails If __GFP_WAIT isn't set and we fail allocating, when we go to drop the reference on the ctx, we will attempt to dereference the NULL rq. Fix that. Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/blk-mq.c b/block/blk-mq.c index cdc629c..70fd6f9 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -202,10 +202,12 @@ static struct request *blk_mq_alloc_request_pinned(struct request_queue *q, if (rq) { blk_mq_rq_ctx_init(q, ctx, rq, rw); break; - } else if (!(gfp & __GFP_WAIT)) - break; + } blk_mq_put_ctx(ctx); + if (!(gfp & __GFP_WAIT)) + break; + __blk_mq_run_hw_queue(hctx); blk_mq_wait_for_tags(hctx->tags); } while (1); @@ -222,7 +224,8 @@ struct request *blk_mq_alloc_request(struct request_queue *q, int rw, return NULL; rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved); - blk_mq_put_ctx(rq->mq_ctx); + if (rq) + blk_mq_put_ctx(rq->mq_ctx); return rq; } @@ -235,7 +238,8 @@ struct request *blk_mq_alloc_reserved_request(struct request_queue *q, int rw, return NULL; rq = blk_mq_alloc_request_pinned(q, rw, gfp, true); - blk_mq_put_ctx(rq->mq_ctx); + if (rq) + blk_mq_put_ctx(rq->mq_ctx); return rq; } EXPORT_SYMBOL(blk_mq_alloc_reserved_request); -- cgit v0.10.2 From 027476642811f8559cbe00ef6cc54db230e48a20 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 2 Dec 2013 11:08:06 +0200 Subject: drm/i915: Take modeset locks around intel_modeset_setup_hw_state() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some lower level things get angry if we don't have modeset locks during intel_modeset_setup_hw_state(). Actually the resume and lid_notify codepaths alreday hold the locks, but the init codepath doesn't, so fix that. Note: This slipped through since we only disable pipes if the plane/pipe linking doesn't match. Which is only relevant on older gen3 mobile machines, if the BIOS fails to set up our preferred linking. Signed-off-by: Ville Syrjälä Cc: stable@vger.kernel.org Tested-and-reported-by: Paul Bolle [danvet: Add note now that I could confirm my theory with the log files Paul Bolle provided.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 080f6fd..114db51 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11046,7 +11046,9 @@ void intel_modeset_gem_init(struct drm_device *dev) intel_setup_overlay(dev); + drm_modeset_lock_all(dev); intel_modeset_setup_hw_state(dev, false); + drm_modeset_unlock_all(dev); } void intel_modeset_cleanup(struct drm_device *dev) -- cgit v0.10.2 From edd5b13313551d6b04acfb90d3db58ed3cf3c814 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 2 Dec 2013 17:39:09 +0000 Subject: drm/i915: Do not clobber config status after a forced restore of hw state We call intel_modeset_setup_hw_state() along two paths, driver load/resume and after a lid event notification. During initialisation of the driver, it is imperative that we reset the config state. This correctly sets up the initial connector statuses and prepares the hardware for a thorough probing. However, during a lid event, we only want to undo the damage caused by the bios by resetting our last known mode. In this cirumstance, we do not want to clobber our desired state. In order to try and keep sanity between the config state and our own tracking, do the drm_mode_config_reset() first along the load/resume paths before reading out the hw state and apply any definite known corrections. v2: "As discussed on irc I don't think we should force the connector state to anything here: Imo connector->status should reflect what we believe to be the true output connection state, whereas connector->encoder reflects whether this connector is wired up to a pipe. And since we no longer reject modeset on disconnected connectors and never nuked the pipe if the connector gets disconnected there's no reason for that - such policy is userspace's job. This regression has been introduced in commit 2e9388923e83bc4e2726f170a984621f1d582e77 Author: Daniel Vetter Date: Thu Oct 11 20:08:24 2012 +0200 drm/i915/crt: explicitly set up HOTPLUG_BITS on resume" so sayeth Daniel. Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: stable@vger.kernel.org (v3.8 and later) Cc: Paulo Zanoni Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2e367a1..5b7b7e0 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -651,6 +651,7 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings) intel_modeset_init_hw(dev); drm_modeset_lock_all(dev); + drm_mode_config_reset(dev); intel_modeset_setup_hw_state(dev, true); drm_modeset_unlock_all(dev); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 114db51..8e44b16 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11036,8 +11036,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, } intel_modeset_check_state(dev); - - drm_mode_config_reset(dev); } void intel_modeset_gem_init(struct drm_device *dev) @@ -11047,6 +11045,7 @@ void intel_modeset_gem_init(struct drm_device *dev) intel_setup_overlay(dev); drm_modeset_lock_all(dev); + drm_mode_config_reset(dev); intel_modeset_setup_hw_state(dev, false); drm_modeset_unlock_all(dev); } -- cgit v0.10.2 From 5ae68b413214e847a2b5c6d3c65778482542bc1a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 2 Dec 2013 11:23:39 +0200 Subject: drm/i915: Skip clock checks on BDW MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't have clock state readout support for DDI, so skip the pipe config clock checks on all DDI platforms. Signed-off-by: Ville Syrjälä Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8e44b16..8b8bde7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9135,7 +9135,7 @@ intel_pipe_config_compare(struct drm_device *dev, if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) PIPE_CONF_CHECK_I(pipe_bpp); - if (!IS_HASWELL(dev)) { + if (!HAS_DDI(dev)) { PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock); PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock); } -- cgit v0.10.2 From 725dd7eb170af813407ee45409590941a5ac626e Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 17 Jul 2013 16:19:09 -0500 Subject: arm: socfpga: Enable ARM_TWD for socfpga Update Kconfig to enable TWD. Signed-off-by: Dinh Nguyen Reviewed-by: Pavel Machek Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 037100a..aee77f0 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ config ARCH_SOCFPGA select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP select HAVE_SMP select MFD_SYSCON select SPARSE_IRQ -- cgit v0.10.2 From a5c6e87a7b224bdbf57875a9da8f340f5a6abc5a Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 3 Dec 2013 14:32:10 -0600 Subject: arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk Some of the clocks that were designated gate-clk do not have a gate, so change those clocks to be of periph-clk type. Signed-off-by: Dinh Nguyen Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6d09b8d..f936476 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -245,14 +245,14 @@ mpu_periph_clk: mpu_periph_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <4>; }; mpu_l2_ram_clk: mpu_l2_ram_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <2>; }; @@ -266,8 +266,9 @@ l3_main_clk: l3_main_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mainclk>; + fixed-divider = <1>; }; l3_mp_clk: l3_mp_clk { -- cgit v0.10.2 From a16ab68ee96005382738c706fd06bdd874d9185b Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 3 Dec 2013 23:02:26 +0100 Subject: parisc: update 64bit defconfigs and use SIL680 instead of SIIMAGE driver Signed-off-by: Helge Deller diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index ec1b014..acacd34 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -50,7 +50,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_SIIMAGE=m +CONFIG_PATA_SIL680=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig index bb81d02..8249ac9 100644 --- a/arch/parisc/configs/c8000_defconfig +++ b/arch/parisc/configs/c8000_defconfig @@ -80,8 +80,6 @@ CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_PLATFORM=y CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m @@ -93,6 +91,8 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_ATA=y +CONFIG_PATA_SIL680=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_SAS=y @@ -113,9 +113,8 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_INPUT_MISC=y -CONFIG_INPUT_CM109=m CONFIG_SERIO_SERPORT=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_GSCPS2=m @@ -166,34 +165,6 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_AD1889=m # CONFIG_SND_USB is not set # CONFIG_SND_GSC is not set -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_HID_EZKEY=m -CONFIG_HID_KYE=m -CONFIG_HID_GYRATION=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_GREENASIA=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_HID_ZEROPLUS=m -CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig index 1413b8d..28c1b5d 100644 --- a/arch/parisc/configs/generic-64bit_defconfig +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -67,7 +67,6 @@ CONFIG_IDE_GD=m CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y @@ -81,6 +80,7 @@ CONFIG_SCSI_ZALON=y CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_DH=y CONFIG_ATA=y +CONFIG_PATA_SIL680=y CONFIG_ATA_GENERIC=y CONFIG_MD=y CONFIG_MD_LINEAR=m @@ -161,7 +161,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set CONFIG_INPUT_MISC=y CONFIG_SERIO_SERPORT=m # CONFIG_HP_SDC is not set @@ -215,32 +215,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set -CONFIG_HID=m CONFIG_HIDRAW=y -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_KYE=m -CONFIG_HID_GYRATION=m -CONFIG_HID_TWINHAN=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_NTRIG=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TOPSEED=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y @@ -250,13 +225,8 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=m CONFIG_USB_WUSB_CBAF=m CONFIG_USB_XHCI_HCD=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y -- cgit v0.10.2 From 5551a34e5aeab868f8d37f70d8754868921b4ee5 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 20 Nov 2013 13:31:49 -0800 Subject: x86-64, build: Always pass in -mno-sse Always pass in the -mno-sse argument, regardless if -preferred-stack-boundary is supported. We never want to generate SSE instructions in the kernel unless we *really* know what we're doing. According to H. J. Lu, any version of gcc new enough that we support it at all should handle the -mno-sse option, so just add it unconditionally. Reported-by: Kevin B. Smith Signed-off-by: H. Peter Anvin Cc: H. J. Lu Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org Cc: # build fix only diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 41250fb..eda00f9 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -31,6 +31,9 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Don't autogenerate SSE instructions + KBUILD_CFLAGS += -mno-sse + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built # with nonstandard options KBUILD_CFLAGS += -fno-pic @@ -57,8 +60,11 @@ else KBUILD_AFLAGS += -m64 KBUILD_CFLAGS += -m64 + # Don't autogenerate SSE instructions + KBUILD_CFLAGS += -mno-sse + # Use -mpreferred-stack-boundary=3 if supported. - KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3) + KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3) # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu) cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) -- cgit v0.10.2 From c0778e2534b81be6b85b5ee07c0e15ff774f7136 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 3 Dec 2013 20:16:03 -0500 Subject: Btrfs: update the MAINTAINERS file Josef and I have new email addresses Signed-off-by: Chris Mason Signed-off-by: Josef Bacik diff --git a/MAINTAINERS b/MAINTAINERS index ffcaf97..db89b5d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1921,7 +1921,8 @@ S: Maintained F: drivers/gpio/gpio-bt8xx.c BTRFS FILE SYSTEM -M: Chris Mason +M: Chris Mason +M: Josef Bacik L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ Q: http://patchwork.kernel.org/project/linux-btrfs/list/ -- cgit v0.10.2 From 89116bf962a358a6ad964a01a658d0392019a2de Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 26 Nov 2013 16:03:03 -0800 Subject: Fix pl08x warnings drivers/dma/amba-pl08x.c: In function 'pl08x_desc_free': drivers/dma/amba-pl08x.c:1173:2: warning: passing argument 1 of 'dma_descriptor_unmap' from incompatible pointer type include/linux/dmaengine.h:476:91: note: expected 'struct dma_async_tx_descriptor *' but argument is of type 'struct pl08x_txd *' Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data") Signed-off-by: Russell King Signed-off-by: Dan Williams Signed-off-by: Vinod Koul diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 16a2aa2..ec4ee5c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1169,7 +1169,7 @@ static void pl08x_desc_free(struct virt_dma_desc *vd) struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan); - dma_descriptor_unmap(txd); + dma_descriptor_unmap(&vd->tx); if (!txd->done) pl08x_release_mux(plchan); -- cgit v0.10.2 From 85726def1e351bdd057cdc4bb349dcbdf6bdd251 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 3 Dec 2013 14:55:50 -0800 Subject: dma: fix build breakage in s3c24xx-dma This driver missed the dma unmap conversion. Replace s3c24xx_dma_unmap_buffers with dma_descriptor_unmap. Signed-off-by: Dan Williams Signed-off-by: Vinod Koul diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index 085da4f..4eddedb 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -628,42 +628,13 @@ retry: s3cchan->state = S3C24XX_DMA_CHAN_IDLE; } -static void s3c24xx_dma_unmap_buffers(struct s3c24xx_txd *txd) -{ - struct device *dev = txd->vd.tx.chan->device->dev; - struct s3c24xx_sg *dsg; - - if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - else { - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - } - } - - if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - else - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - } -} - static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd) { struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx); struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan); if (!s3cchan->slave) - s3c24xx_dma_unmap_buffers(txd); + dma_descriptor_unmap(&vd->tx); s3c24xx_dma_free_txd(txd); } -- cgit v0.10.2 From eb21aad9fdf7882801923431ccbc9226e2c3be17 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 4 Dec 2013 15:06:14 +0800 Subject: ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebook I forgot to remove the hp_automute_hook from alc283_fixup_chromebook. It doesn't need this for other chrome os machine. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ba2b982..e327e63 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3613,7 +3613,6 @@ static void alc283_fixup_chromebook(struct hda_codec *codec, snd_hda_override_wcaps(codec, 0x03, 0); /* Disable AA-loopback as it causes white noise */ spec->gen.mixer_nid = 0; - spec->gen.hp_automute_hook = alc283_hp_automute_hook; break; case HDA_FIXUP_ACT_INIT: /* Enable Line1 input control by verb */ -- cgit v0.10.2 From 20ce902978a70ab51ad9ed645f636805f3ff2b0d Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 4 Dec 2013 10:19:41 +0800 Subject: ALSA: hda - Fix missing ELD info when using jackpoll_ms parameter In the case of using jackpoll_ms instead of unsol events, the jack was correctly detected, but ELD info was not refreshed on plug-in. And without ELD info, no proper restriction of pcm, which can in turn break sound output on some devices. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 08407be..c4a66ef 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1142,32 +1142,34 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll); -static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) +static void jack_callback(struct hda_codec *codec, struct hda_jack_tbl *jack) { struct hdmi_spec *spec = codec->spec; + int pin_idx = pin_nid_to_pin_index(spec, jack->nid); + if (pin_idx < 0) + return; + + if (hdmi_present_sense(get_pin(spec, pin_idx), 1)) + snd_hda_jack_report_sync(codec); +} + +static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) +{ int tag = res >> AC_UNSOL_RES_TAG_SHIFT; - int pin_nid; - int pin_idx; struct hda_jack_tbl *jack; int dev_entry = (res & AC_UNSOL_RES_DE) >> AC_UNSOL_RES_DE_SHIFT; jack = snd_hda_jack_tbl_get_from_tag(codec, tag); if (!jack) return; - pin_nid = jack->nid; jack->jack_dirty = 1; _snd_printd(SND_PR_VERBOSE, "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, dev_entry, !!(res & AC_UNSOL_RES_IA), + codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA), !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); - pin_idx = pin_nid_to_pin_index(spec, pin_nid); - if (pin_idx < 0) - return; - - if (hdmi_present_sense(get_pin(spec, pin_idx), 1)) - snd_hda_jack_report_sync(codec); + jack_callback(codec, jack); } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) @@ -2095,7 +2097,8 @@ static int generic_hdmi_init(struct hda_codec *codec) hda_nid_t pin_nid = per_pin->pin_nid; hdmi_init_pin(codec, pin_nid); - snd_hda_jack_detect_enable(codec, pin_nid, pin_nid); + snd_hda_jack_detect_enable_callback(codec, pin_nid, pin_nid, + codec->jackpoll_interval > 0 ? jack_callback : NULL); } return 0; } -- cgit v0.10.2 From 5a0973f33b4e6a10227b3d285ff2b0777730d298 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 22 Oct 2013 18:36:57 +0200 Subject: atmel_lcdfb: fix module autoload Add missing module device table which is needed for module autoloading. Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 8521051..cd96162 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -131,6 +131,7 @@ static const struct platform_device_id atmel_lcdfb_devtypes[] = { /* terminator */ } }; +MODULE_DEVICE_TABLE(platform, atmel_lcdfb_devtypes); static struct atmel_lcdfb_config * atmel_lcdfb_get_config(struct platform_device *pdev) -- cgit v0.10.2 From 46ac29568e63c9da9c15804648d3ed8c25e2dc44 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 2 Dec 2013 11:11:18 +0300 Subject: video: vt8500: fix error handling in probe() We shouldn't kfree(fbi) because that was allocated with devm_kzalloc(). There were several error paths which returned directly instead of releasing resources. Signed-off-by: Dan Carpenter Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c index b30e5a4..a8f2b28 100644 --- a/drivers/video/vt8500lcdfb.c +++ b/drivers/video/vt8500lcdfb.c @@ -293,8 +293,7 @@ static int vt8500lcd_probe(struct platform_device *pdev) + sizeof(u32) * 16, GFP_KERNEL); if (!fbi) { dev_err(&pdev->dev, "Failed to initialize framebuffer device\n"); - ret = -ENOMEM; - goto failed; + return -ENOMEM; } strcpy(fbi->fb.fix.id, "VT8500 LCD"); @@ -327,15 +326,13 @@ static int vt8500lcd_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no I/O memory resource defined\n"); - ret = -ENODEV; - goto failed_fbi; + return -ENODEV; } res = request_mem_region(res->start, resource_size(res), "vt8500lcd"); if (res == NULL) { dev_err(&pdev->dev, "failed to request I/O memory\n"); - ret = -EBUSY; - goto failed_fbi; + return -EBUSY; } fbi->regbase = ioremap(res->start, resource_size(res)); @@ -346,17 +343,19 @@ static int vt8500lcd_probe(struct platform_device *pdev) } disp_timing = of_get_display_timings(pdev->dev.of_node); - if (!disp_timing) - return -EINVAL; + if (!disp_timing) { + ret = -EINVAL; + goto failed_free_io; + } ret = of_get_fb_videomode(pdev->dev.of_node, &of_mode, OF_USE_NATIVE_MODE); if (ret) - return ret; + goto failed_free_io; ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp); if (ret) - return ret; + goto failed_free_io; /* try allocating the framebuffer */ fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8); @@ -364,7 +363,8 @@ static int vt8500lcd_probe(struct platform_device *pdev) GFP_KERNEL); if (!fb_mem_virt) { pr_err("%s: Failed to allocate framebuffer\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto failed_free_io; } fbi->fb.fix.smem_start = fb_mem_phys; @@ -447,9 +447,6 @@ failed_free_io: iounmap(fbi->regbase); failed_free_res: release_mem_region(res->start, resource_size(res)); -failed_fbi: - kfree(fbi); -failed: return ret; } -- cgit v0.10.2 From 0756f09c4946fe2d9ce2ebcb6f2e3c58830d22a3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Dec 2013 13:59:45 +0100 Subject: ALSA: hda - Fix silent output on MacBook Air 2,1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MacBook Air 2,1 has a fairly different pin assignment from its brother MBA 1,1, and yet another quirks are needed for pin 0x18 and 0x19, similarly like what iMac 9,1 requires, in order to make the sound working on it. Reported-and-tested-by: Bruno Prémont Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e327e63..c5ea483 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1780,6 +1780,7 @@ enum { ALC889_FIXUP_DAC_ROUTE, ALC889_FIXUP_MBP_VREF, ALC889_FIXUP_IMAC91_VREF, + ALC889_FIXUP_MBA21_VREF, ALC882_FIXUP_INV_DMIC, ALC882_FIXUP_NO_PRIMARY_HP, ALC887_FIXUP_ASUS_BASS, @@ -1884,17 +1885,13 @@ static void alc889_fixup_mbp_vref(struct hda_codec *codec, } } -/* Set VREF on speaker pins on imac91 */ -static void alc889_fixup_imac91_vref(struct hda_codec *codec, - const struct hda_fixup *fix, int action) +static void alc889_fixup_mac_pins(struct hda_codec *codec, + const hda_nid_t *nids, int num_nids) { struct alc_spec *spec = codec->spec; - static hda_nid_t nids[2] = { 0x18, 0x1a }; int i; - if (action != HDA_FIXUP_ACT_INIT) - return; - for (i = 0; i < ARRAY_SIZE(nids); i++) { + for (i = 0; i < num_nids; i++) { unsigned int val; val = snd_hda_codec_get_pin_target(codec, nids[i]); val |= AC_PINCTL_VREF_50; @@ -1903,6 +1900,26 @@ static void alc889_fixup_imac91_vref(struct hda_codec *codec, spec->gen.keep_vref_in_automute = 1; } +/* Set VREF on speaker pins on imac91 */ +static void alc889_fixup_imac91_vref(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + static hda_nid_t nids[2] = { 0x18, 0x1a }; + + if (action == HDA_FIXUP_ACT_INIT) + alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids)); +} + +/* Set VREF on speaker pins on mba21 */ +static void alc889_fixup_mba21_vref(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + static hda_nid_t nids[2] = { 0x18, 0x19 }; + + if (action == HDA_FIXUP_ACT_INIT) + alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids)); +} + /* Don't take HP output as primary * Strangely, the speaker output doesn't work on Vaio Z and some Vaio * all-in-one desktop PCs (for example VGC-LN51JGB) through DAC 0x05 @@ -2102,6 +2119,12 @@ static const struct hda_fixup alc882_fixups[] = { .chained = true, .chain_id = ALC882_FIXUP_GPIO1, }, + [ALC889_FIXUP_MBA21_VREF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc889_fixup_mba21_vref, + .chained = true, + .chain_id = ALC889_FIXUP_MBP_VREF, + }, [ALC882_FIXUP_INV_DMIC] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_inv_dmic_0x12, @@ -2172,7 +2195,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889_FIXUP_MBP_VREF), SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC889_FIXUP_MBP_VREF), - SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBP_VREF), + SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBA21_VREF), SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889_FIXUP_MBP_VREF), SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF), SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_FIXUP_MACPRO_GPIO), -- cgit v0.10.2 From 0d1430a3f4b7cfd8779b78740a4182321f3ca7f3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 4 Dec 2013 14:52:06 +0000 Subject: drm/i915: Hold mutex across i915_gem_release Inorder to serialise the closing of the file descriptor and its subsequent release of client requests with i915_gem_free_request(), we need to hold the struct_mutex in i915_gem_release(). Failing to do so has the potential to trigger an OOPS, later with a use-after-free. Testcase: igt/gem_close_race Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70874 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71029 Reported-by: Eric Anholt Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0cab2d0..ac9dac9 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1848,8 +1848,10 @@ void i915_driver_lastclose(struct drm_device * dev) void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) { + mutex_lock(&dev->struct_mutex); i915_gem_context_close(dev, file_priv); i915_gem_release(dev, file_priv); + mutex_unlock(&dev->struct_mutex); } void i915_driver_postclose(struct drm_device *dev, struct drm_file *file) diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 72a3df3..4a05956 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -347,10 +347,8 @@ void i915_gem_context_close(struct drm_device *dev, struct drm_file *file) { struct drm_i915_file_private *file_priv = file->driver_priv; - mutex_lock(&dev->struct_mutex); idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL); idr_destroy(&file_priv->context_idr); - mutex_unlock(&dev->struct_mutex); } static struct i915_hw_context * -- cgit v0.10.2 From 9323297dc0ea9141f8099e474657391bb3ad98f8 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 27 Nov 2013 17:23:00 -0300 Subject: [media] af9035: fix broken I2C and USB I/O There was three small buffer len calculation bugs which caused driver non-working. These are coming from recent commit: commit 7760e148350bf6df95662bc0db3734e9d991cb03 [media] af9035: Don't use dynamic static allocation Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 798565c..4453b0b 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -131,7 +131,7 @@ static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) { u8 wbuf[MAX_XFER_SIZE]; u8 mbox = (reg >> 16) & 0xff; - struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL }; + struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; if (6 + len > sizeof(wbuf)) { dev_warn(&d->udev->dev, "%s: i2c wr: len=%d is too big!\n", @@ -238,7 +238,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, } else { /* I2C */ u8 buf[MAX_XFER_SIZE]; - struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), + struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, buf, msg[1].len, msg[1].buf }; if (5 + msg[0].len > sizeof(buf)) { @@ -274,8 +274,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, } else { /* I2C */ u8 buf[MAX_XFER_SIZE]; - struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf, - 0, NULL }; + struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, + buf, 0, NULL }; if (5 + msg[0].len > sizeof(buf)) { dev_warn(&d->udev->dev, -- cgit v0.10.2 From 5264682a3cd197b79995573449249573adb8267c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 4 Nov 2013 06:52:10 -0300 Subject: [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev The remote subdev of any video node in the OMAP3 ISP is an internal subdev that is guaranteed to implement get_fmt. Don't check the return value for -ENOIOCTLCMD, as this can't happen. While at it, move non-critical code out of the mutex-protected section. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a908d00..f6304bb 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -339,14 +339,11 @@ __isp_video_get_format(struct isp_video *video, struct v4l2_format *format) if (subdev == NULL) return -EINVAL; - mutex_lock(&video->mutex); - fmt.pad = pad; fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; - ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); - if (ret == -ENOIOCTLCMD) - ret = -EINVAL; + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); mutex_unlock(&video->mutex); if (ret) -- cgit v0.10.2 From d18a88b1f535d627412b2a265d71b2f7d464860e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 27 Nov 2013 17:17:43 -0300 Subject: [media] af9033: fix broken I2C Driver did not work anymore since I2C has gone broken due to recent commit: commit 37ebaf6891ee81687bb558e8375c0712d8264ed8 [media] dvb-frontends: Don't use dynamic static allocation Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c index 30ee590..65728c2 100644 --- a/drivers/media/dvb-frontends/af9033.c +++ b/drivers/media/dvb-frontends/af9033.c @@ -170,18 +170,18 @@ static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val, static int af9033_wr_reg_val_tab(struct af9033_state *state, const struct reg_val *tab, int tab_len) { +#define MAX_TAB_LEN 212 int ret, i, j; - u8 buf[MAX_XFER_SIZE]; + u8 buf[1 + MAX_TAB_LEN]; + + dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); if (tab_len > sizeof(buf)) { - dev_warn(&state->i2c->dev, - "%s: i2c wr len=%d is too big!\n", - KBUILD_MODNAME, tab_len); + dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n", + KBUILD_MODNAME, tab_len); return -EINVAL; } - dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); - for (i = 0, j = 0; i < tab_len; i++) { buf[j] = tab[i].val; -- cgit v0.10.2 From 3189ef0290dcc9f44782672fade35847cb30da00 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 22 Nov 2013 04:50:46 -0300 Subject: [media] af9035: unlock on error in af9035_i2c_master_xfer() We introduced a couple new error paths which are missing unlocks. Fixes: 7760e148350b ('[media] af9035: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter Acked-by: Antti Palosaari Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Cc: stable@vger.kernel.org diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 4453b0b..8f9b2cea 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -245,7 +245,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, dev_warn(&d->udev->dev, "%s: i2c xfer: len=%d is too big!\n", KBUILD_MODNAME, msg[0].len); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto unlock; } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[1].len; @@ -281,7 +282,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, dev_warn(&d->udev->dev, "%s: i2c xfer: len=%d is too big!\n", KBUILD_MODNAME, msg[0].len); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto unlock; } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[0].len; @@ -319,6 +321,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, ret = -EOPNOTSUPP; } +unlock: mutex_unlock(&d->i2c_mutex); if (ret < 0) -- cgit v0.10.2 From 3843114856728075d0a80e7151197c19fb3a9e08 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 4 Dec 2013 11:05:17 -0600 Subject: ARM: highbank: handle soft poweroff and reset key events Graceful reboot and poweroff via IPMI commands to the management processor don't work. Power and reset keys are events from the management processor which are generated via IPC messages. Passing the keys to userspace does not work as neither acpid nor a desktop environment are present. This adds a notifier handler for the IPC messages so the kernel can handle the key events directly and IPMI graceful shutdown will work. Signed-off-by: Rob Herring Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b3d7e56..bd3bf66 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -17,12 +17,15 @@ #include #include #include +#include #include #include +#include #include #include #include #include +#include #include #include @@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = { .name = "cpuidle-calxeda", }; +static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data) +{ + u32 key = *(u32 *)data; + + if (event != 0x1000) + return 0; + + if (key == KEY_POWER) + orderly_poweroff(false); + else if (key == 0xffff) + ctrl_alt_del(); + + return 0; +} +static struct notifier_block hb_keys_nb = { + .notifier_call = hb_keys_notifier, +}; + static void __init highbank_init(void) { struct device_node *np; @@ -145,6 +166,8 @@ static void __init highbank_init(void) bus_register_notifier(&platform_bus_type, &highbank_platform_nb); bus_register_notifier(&amba_bustype, &highbank_amba_nb); + pl320_ipc_register_notifier(&hb_keys_nb); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); if (psci_ops.cpu_suspend) -- cgit v0.10.2 From f22e5edd2244609aed3906207a62223e7707a34d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 4 Dec 2013 12:09:45 -0500 Subject: NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery Andy Adamson reports: The state manager is recovering expired state and recovery OPENs are being processed. If kswapd is pruning inodes at the same time, a deadlock can occur when kswapd calls evict_inode on an NFSv4.1 inode with a layout, and the resultant layoutreturn gets an error that the state mangager is to handle, causing the layoutreturn to wait on the (NFS client) cl_rpcwaitq. At the same time an open is waiting for the inode deletion to complete in __wait_on_freeing_inode. If the open is either the open called by the state manager, or an open from the same open owner that is holding the NFSv4 sequence id which causes the OPEN from the state manager to wait for the sequence id on the Seqid_waitqueue, then the state is deadlocked with kswapd. The fix is simply to have layoutreturn ignore all errors except NFS4ERR_DELAY. We already know that layouts are dropped on all server reboots, and that it has to be coded to deal with the "forgetful client model" that doesn't send layoutreturns. Reported-by: Andy Adamson Link: http://lkml.kernel.org/r/1385402270-14284-1-git-send-email-andros@netapp.com Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f01e2aa..e040359 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7599,7 +7599,14 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) return; server = NFS_SERVER(lrp->args.inode); - if (nfs4_async_handle_error(task, server, NULL) == -EAGAIN) { + switch (task->tk_status) { + default: + task->tk_status = 0; + case 0: + break; + case -NFS4ERR_DELAY: + if (nfs4_async_handle_error(task, server, NULL) != -EAGAIN) + break; rpc_restart_call_prepare(task); return; } -- cgit v0.10.2 From cd7b996aa6cafe520dd987b12694fd8af4278466 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 4 Dec 2013 12:29:49 -0500 Subject: MAINTAINERS: Update contact information for Trond Myklebust Signed-off-by: Trond Myklebust diff --git a/MAINTAINERS b/MAINTAINERS index d2d2f45..cfe3926 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5878,10 +5878,10 @@ F: drivers/nfc/ F: include/linux/platform_data/pn544.h NFS, SUNRPC, AND LOCKD CLIENTS -M: Trond Myklebust +M: Trond Myklebust L: linux-nfs@vger.kernel.org W: http://client.linux-nfs.org -T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git +T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git S: Maintained F: fs/lockd/ F: fs/nfs/ -- cgit v0.10.2 From 3873d064b8538686bbbd4b858dc8a07db1f7f43a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 2 Dec 2013 19:59:31 +0100 Subject: nfs: fix do_div() warning by instead using sector_div() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When compiling a 32bit kernel with CONFIG_LBDAF=n the compiler complains like shown below. Fix this warning by instead using sector_div() which is provided by the kernel.h header file. fs/nfs/blocklayout/extents.c: In function ‘normalize’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/blocklayout/extents.c:47:13: note: in expansion of macro ‘do_div’ nfs/blocklayout/extents.c:47:2: warning: right shift count >= width of type [enabled by default] fs/nfs/blocklayout/extents.c:47:2: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [enabled by default] include/asm-generic/div64.h:35:17: note: expected ‘uint64_t *’ but argument is of type ‘sector_t *’ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); Signed-off-by: Helge Deller Signed-off-by: Trond Myklebust diff --git a/fs/nfs/blocklayout/extents.c b/fs/nfs/blocklayout/extents.c index 9c3e117..4d01614 100644 --- a/fs/nfs/blocklayout/extents.c +++ b/fs/nfs/blocklayout/extents.c @@ -44,7 +44,7 @@ static inline sector_t normalize(sector_t s, int base) { sector_t tmp = s; /* Since do_div modifies its argument */ - return s - do_div(tmp, base); + return s - sector_div(tmp, base); } static inline sector_t normalize_up(sector_t s, int base) -- cgit v0.10.2 From c6c1f325adc8a8e0cd06c6ad0ca232a6880a1783 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Thu, 14 Nov 2013 03:11:10 -0800 Subject: drm/vmwgfx: Correctly set the enabled state on crtcs Failure to do this would make the drm_mode_get_crtc ioctl return without crtc mode info, indicating that no mode was set. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index 79f7e8e..c11ddc5 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -260,6 +260,7 @@ static int vmw_ldu_crtc_set_config(struct drm_mode_set *set) connector->encoder = NULL; encoder->crtc = NULL; crtc->fb = NULL; + crtc->enabled = false; vmw_ldu_del_active(dev_priv, ldu); @@ -285,6 +286,7 @@ static int vmw_ldu_crtc_set_config(struct drm_mode_set *set) crtc->x = set->x; crtc->y = set->y; crtc->mode = *mode; + crtc->enabled = true; vmw_ldu_add_active(dev_priv, ldu, vfb); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c index 26387c3..31c6ef3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c @@ -310,6 +310,7 @@ static int vmw_sou_crtc_set_config(struct drm_mode_set *set) crtc->fb = NULL; crtc->x = 0; crtc->y = 0; + crtc->enabled = false; vmw_sou_del_active(dev_priv, sou); @@ -370,6 +371,7 @@ static int vmw_sou_crtc_set_config(struct drm_mode_set *set) crtc->fb = NULL; crtc->x = 0; crtc->y = 0; + crtc->enabled = false; return ret; } @@ -382,6 +384,7 @@ static int vmw_sou_crtc_set_config(struct drm_mode_set *set) crtc->fb = fb; crtc->x = set->x; crtc->y = set->y; + crtc->enabled = true; return 0; } -- cgit v0.10.2 From d69d51d73f9509dbb727e36a3a7ddac8b003ac6b Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Thu, 28 Nov 2013 00:28:30 -0800 Subject: drm/vmwgfx: Fix up and comment the dumb buffer implementation Allocation was duplicating code. Comments were missing. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index efe2b74..4381e27 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -781,54 +781,55 @@ err_ref: } +/** + * vmw_dumb_create - Create a dumb kms buffer + * + * @file_priv: Pointer to a struct drm_file identifying the caller. + * @dev: Pointer to the drm device. + * @args: Pointer to a struct drm_mode_create_dumb structure + * + * This is a driver callback for the core drm create_dumb functionality. + * Note that this is very similar to the vmw_dmabuf_alloc ioctl, except + * that the arguments have a different format. + */ int vmw_dumb_create(struct drm_file *file_priv, struct drm_device *dev, struct drm_mode_create_dumb *args) { struct vmw_private *dev_priv = vmw_priv(dev); struct vmw_master *vmaster = vmw_master(file_priv->master); - struct vmw_user_dma_buffer *vmw_user_bo; - struct ttm_buffer_object *tmp; + struct vmw_dma_buffer *dma_buf; int ret; args->pitch = args->width * ((args->bpp + 7) / 8); args->size = args->pitch * args->height; - vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL); - if (vmw_user_bo == NULL) - return -ENOMEM; - ret = ttm_read_lock(&vmaster->lock, true); - if (ret != 0) { - kfree(vmw_user_bo); + if (unlikely(ret != 0)) return ret; - } - - ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size, - &vmw_vram_sys_placement, true, - &vmw_user_dmabuf_destroy); - if (ret != 0) - goto out_no_dmabuf; - tmp = ttm_bo_reference(&vmw_user_bo->dma.base); - ret = ttm_prime_object_init(vmw_fpriv(file_priv)->tfile, - args->size, - &vmw_user_bo->prime, - false, - ttm_buffer_type, - &vmw_user_dmabuf_release, NULL); + ret = vmw_user_dmabuf_alloc(dev_priv, vmw_fpriv(file_priv)->tfile, + args->size, false, &args->handle, + &dma_buf); if (unlikely(ret != 0)) - goto out_no_base_object; - - args->handle = vmw_user_bo->prime.base.hash.key; + goto out_no_dmabuf; -out_no_base_object: - ttm_bo_unref(&tmp); + vmw_dmabuf_unreference(&dma_buf); out_no_dmabuf: ttm_read_unlock(&vmaster->lock); return ret; } +/** + * vmw_dumb_map_offset - Return the address space offset of a dumb buffer + * + * @file_priv: Pointer to a struct drm_file identifying the caller. + * @dev: Pointer to the drm device. + * @handle: Handle identifying the dumb buffer. + * @offset: The address space offset returned. + * + * This is a driver callback for the core drm dumb_map_offset functionality. + */ int vmw_dumb_map_offset(struct drm_file *file_priv, struct drm_device *dev, uint32_t handle, uint64_t *offset) @@ -846,6 +847,15 @@ int vmw_dumb_map_offset(struct drm_file *file_priv, return 0; } +/** + * vmw_dumb_destroy - Destroy a dumb boffer + * + * @file_priv: Pointer to a struct drm_file identifying the caller. + * @dev: Pointer to the drm device. + * @handle: Handle identifying the dumb buffer. + * + * This is a driver callback for the core drm dumb_destroy functionality. + */ int vmw_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev, uint32_t handle) -- cgit v0.10.2 From 308d17ef9530f236466a31a7855fc3d5176292d4 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Thu, 28 Nov 2013 01:46:56 -0800 Subject: drm/vmwgfx: Fix dma buffer memory size accounting Also request kernel ttm_buffer objects for buffer objects that obviously aren't visible to user-space, and save some device address space. The accounting was broken in a couple of ways: 1) We did not differentiate between user dma buffers and kernel dma buffers. 2) The ttm_bo_acc_size function is broken in that it a) Doesn't take into account the size of the optional dma address array, b) Doesn't take into account the fact that drivers typically embed the ttm_tt structure. This needs to be fixed in ttm, but meanwhile provide a vmwgfx-specific function to do the job. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c index 7776e6f..0489c61 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c @@ -150,6 +150,8 @@ struct vmw_ttm_tt { bool mapped; }; +const size_t vmw_tt_size = sizeof(struct vmw_ttm_tt); + /** * Helper functions to advance a struct vmw_piter iterator. * diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index db85985..20890ad 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -615,6 +615,7 @@ extern int vmw_mmap(struct file *filp, struct vm_area_struct *vma); * TTM buffer object driver - vmwgfx_buffer.c */ +extern const size_t vmw_tt_size; extern struct ttm_placement vmw_vram_placement; extern struct ttm_placement vmw_vram_ne_placement; extern struct ttm_placement vmw_vram_sys_placement; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 4381e27..9b5ea2a 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -352,6 +352,38 @@ int vmw_user_lookup_handle(struct vmw_private *dev_priv, /** * Buffer management. */ + +/** + * vmw_dmabuf_acc_size - Calculate the pinned memory usage of buffers + * + * @dev_priv: Pointer to a struct vmw_private identifying the device. + * @size: The requested buffer size. + * @user: Whether this is an ordinary dma buffer or a user dma buffer. + */ +static size_t vmw_dmabuf_acc_size(struct vmw_private *dev_priv, size_t size, + bool user) +{ + static size_t struct_size, user_struct_size; + size_t num_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; + size_t page_array_size = ttm_round_pot(num_pages * sizeof(void *)); + + if (unlikely(struct_size == 0)) { + size_t backend_size = ttm_round_pot(vmw_tt_size); + + struct_size = backend_size + + ttm_round_pot(sizeof(struct vmw_dma_buffer)); + user_struct_size = backend_size + + ttm_round_pot(sizeof(struct vmw_user_dma_buffer)); + } + + if (dev_priv->map_mode == vmw_dma_alloc_coherent) + page_array_size += + ttm_round_pot(num_pages * sizeof(dma_addr_t)); + + return ((user) ? user_struct_size : struct_size) + + page_array_size; +} + void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo) { struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo); @@ -359,6 +391,13 @@ void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo) kfree(vmw_bo); } +static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo) +{ + struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo); + + ttm_prime_object_kfree(vmw_user_bo, prime); +} + int vmw_dmabuf_init(struct vmw_private *dev_priv, struct vmw_dma_buffer *vmw_bo, size_t size, struct ttm_placement *placement, @@ -368,28 +407,23 @@ int vmw_dmabuf_init(struct vmw_private *dev_priv, struct ttm_bo_device *bdev = &dev_priv->bdev; size_t acc_size; int ret; + bool user = (bo_free == &vmw_user_dmabuf_destroy); - BUG_ON(!bo_free); + BUG_ON(!bo_free && (!user && (bo_free != vmw_dmabuf_bo_free))); - acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct vmw_dma_buffer)); + acc_size = vmw_dmabuf_acc_size(dev_priv, size, user); memset(vmw_bo, 0, sizeof(*vmw_bo)); INIT_LIST_HEAD(&vmw_bo->res_list); ret = ttm_bo_init(bdev, &vmw_bo->base, size, - ttm_bo_type_device, placement, + (user) ? ttm_bo_type_device : + ttm_bo_type_kernel, placement, 0, interruptible, NULL, acc_size, NULL, bo_free); return ret; } -static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo) -{ - struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo); - - ttm_prime_object_kfree(vmw_user_bo, prime); -} - static void vmw_user_dmabuf_release(struct ttm_base_object **p_base) { struct vmw_user_dma_buffer *vmw_user_bo; -- cgit v0.10.2 From 6a0a7a9ead2aa18c13dd8f76c5849daf7be1f45a Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 2 Dec 2013 06:04:38 -0800 Subject: drm/vmwgfx: Add our connectors to sysfs Some user-space apps expects to find them there. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index ecb3d86..03f1c20 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -75,6 +75,7 @@ void vmw_display_unit_cleanup(struct vmw_display_unit *du) vmw_surface_unreference(&du->cursor_surface); if (du->cursor_dmabuf) vmw_dmabuf_unreference(&du->cursor_dmabuf); + drm_sysfs_connector_remove(&du->connector); drm_crtc_cleanup(&du->crtc); drm_encoder_cleanup(&du->encoder); drm_connector_cleanup(&du->connector); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index c11ddc5..a055a26 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -371,6 +371,8 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit) encoder->possible_crtcs = (1 << unit); encoder->possible_clones = 0; + (void) drm_sysfs_connector_add(connector); + drm_crtc_init(dev, crtc, &vmw_legacy_crtc_funcs); drm_mode_crtc_set_gamma_size(crtc, 256); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c index 31c6ef3..22406c8 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c @@ -467,6 +467,8 @@ static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit) encoder->possible_crtcs = (1 << unit); encoder->possible_clones = 0; + (void) drm_sysfs_connector_add(connector); + drm_crtc_init(dev, crtc, &vmw_screen_object_crtc_funcs); drm_mode_crtc_set_gamma_size(crtc, 256); -- cgit v0.10.2 From 0af901643fe3f1f8d44e41115d36609ee4bda2bf Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Wed, 4 Dec 2013 16:10:24 -0500 Subject: selinux: fix possible memory leak Free 'ctx_str' when necessary. Signed-off-by: Geyslan G. Bem Signed-off-by: Paul Moore diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index a91d205..cf79a45 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -327,19 +327,22 @@ int selinux_xfrm_state_alloc_acquire(struct xfrm_state *x, return rc; ctx = kmalloc(sizeof(*ctx) + str_len, GFP_ATOMIC); - if (!ctx) - return -ENOMEM; + if (!ctx) { + rc = -ENOMEM; + goto out; + } ctx->ctx_doi = XFRM_SC_DOI_LSM; ctx->ctx_alg = XFRM_SC_ALG_SELINUX; ctx->ctx_sid = secid; ctx->ctx_len = str_len; memcpy(ctx->ctx_str, ctx_str, str_len); - kfree(ctx_str); x->security = ctx; atomic_inc(&selinux_xfrm_refcount); - return 0; +out: + kfree(ctx_str); + return rc; } /* -- cgit v0.10.2 From ee880dbd1688c99084052c7890246c1e16c89820 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 13 Nov 2013 16:48:17 +0200 Subject: ARM: davinci: Fix McASP mem resource names The ASoC McASP driver looks for the mem resources by name "mpu" and "dat" regions. Change/add the needed name for the mem resources so the driver can pick the correct resource. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index c46eccb..78829c5 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -487,7 +487,7 @@ int __init da8xx_register_emac(void) static struct resource da830_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DA830_MCASP1_REG_BASE, .end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, @@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = { static struct resource da850_mcasp_resources[] = { { - .name = "mcasp", + .name = "mpu", .start = DAVINCI_DA8XX_MCASP0_REG_BASE, .end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index ef9ff1f..d4baf4f 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = { static struct resource dm355_asp1_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP1_BASE, .end = DAVINCI_ASP1_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1511a06..9c68e3f 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = { static struct resource dm365_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_DM365_ASP0_BASE, .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 143a321..79847d0 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = { /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ static struct resource dm644x_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP0_BASE, .end = DAVINCI_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2a73f29..45de58c 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = { static struct resource dm646x_mcasp0_resources[] = { { - .name = "mcasp0", + .name = "mpu", .start = DAVINCI_DM646X_MCASP0_REG_BASE, .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = { static struct resource dm646x_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DM646X_MCASP1_REG_BASE, .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, -- cgit v0.10.2 From e0f6dec35f9286e78879fe1ac92803fd69fc4fdc Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 4 Dec 2013 14:31:28 -0800 Subject: x86, bitops: Correct the assembly constraints to testing bitops In checkin: 0c44c2d0f459 x86: Use asm goto to implement better modify_and_test() functions the various functions which do modify and test were unified and optimized using "asm goto". However, this change missed the detail that the bitops require an "Ir" constraint rather than an "er" constraint ("I" = integer constant from 0-31, "e" = signed 32-bit integer constant). This would cause code to miscompile if these functions were used on constant bit positions 32-255 and the build to fail if used on constant bit positions above 255. Add the constraints as a parameter to the GEN_BINARY_RMWcc() macro to avoid this problem. Reported-by: Jesse Brandeburg Signed-off-by: H. Peter Anvin Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/529E8719.4070202@zytor.com diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index da31c8b..b17f4f4 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -77,7 +77,7 @@ static inline void atomic_sub(int i, atomic_t *v) */ static inline int atomic_sub_and_test(int i, atomic_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e"); + GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e"); } /** @@ -141,7 +141,7 @@ static inline int atomic_inc_and_test(atomic_t *v) */ static inline int atomic_add_negative(int i, atomic_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s"); + GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h index 3f065c9..46e9052 100644 --- a/arch/x86/include/asm/atomic64_64.h +++ b/arch/x86/include/asm/atomic64_64.h @@ -72,7 +72,7 @@ static inline void atomic64_sub(long i, atomic64_t *v) */ static inline int atomic64_sub_and_test(long i, atomic64_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e"); + GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", "e"); } /** @@ -138,7 +138,7 @@ static inline int atomic64_inc_and_test(atomic64_t *v) */ static inline int atomic64_add_negative(long i, atomic64_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s"); + GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 6d76d09..9fc1af7 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -205,7 +205,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_set_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c"); } /** @@ -251,7 +251,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_clear_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c"); } /** @@ -304,7 +304,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_change_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c"); } static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr) diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h index 5b23e60..4ad6560 100644 --- a/arch/x86/include/asm/local.h +++ b/arch/x86/include/asm/local.h @@ -52,7 +52,7 @@ static inline void local_sub(long i, local_t *l) */ static inline int local_sub_and_test(long i, local_t *l) { - GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e"); + GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, "er", i, "%0", "e"); } /** @@ -92,7 +92,7 @@ static inline int local_inc_and_test(local_t *l) */ static inline int local_add_negative(long i, local_t *l) { - GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s"); + GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h index 1ff990f..8f7866a 100644 --- a/arch/x86/include/asm/rmwcc.h +++ b/arch/x86/include/asm/rmwcc.h @@ -16,8 +16,8 @@ cc_label: \ #define GEN_UNARY_RMWcc(op, var, arg0, cc) \ __GEN_RMWcc(op " " arg0, var, cc) -#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \ - __GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val)) +#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \ + __GEN_RMWcc(op " %1, " arg0, var, cc, vcon (val)) #else /* !CC_HAVE_ASM_GOTO */ @@ -33,8 +33,8 @@ do { \ #define GEN_UNARY_RMWcc(op, var, arg0, cc) \ __GEN_RMWcc(op " " arg0, var, cc) -#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \ - __GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val)) +#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \ + __GEN_RMWcc(op " %2, " arg0, var, cc, vcon (val)) #endif /* CC_HAVE_ASM_GOTO */ -- cgit v0.10.2 From cb292ce222cb5ad5b8b3f9fc4b74b8109fb16c19 Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Wed, 4 Dec 2013 15:56:10 +0800 Subject: usb: tools: fix a regression issue that gcc can't link to pthread Reproduce: ray@hr-bak:~/usb$ make -C tools/usb/ make: Entering directory `/home/ray/usb/tools/usb' gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c /tmp/cc0EMxfy.o: In function `main': /home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create' /home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join' collect2: error: ld returned 1 exit status make: *** [testusb] Error 1 make: Leaving directory `/home/ray/usb/tools/usb' Comments: In the latest version (4.7.3) of gcc compiler, it requres that libraries must follow the object or source files like below: "gcc hello.c -lpthread" instead of "gcc -lpthread hello.c" And it isn't encountered at gcc version 4.7.2. So this patch fix to move the pthread option after testusb.c. Signed-off-by: Huang Rui Signed-off-by: Greg Kroah-Hartman diff --git a/tools/usb/Makefile b/tools/usb/Makefile index 396d6c4..acf2165 100644 --- a/tools/usb/Makefile +++ b/tools/usb/Makefile @@ -3,11 +3,12 @@ CC = $(CROSS_COMPILE)gcc PTHREAD_LIBS = -lpthread WARNINGS = -Wall -Wextra -CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS) -I../include +CFLAGS = $(WARNINGS) -g -I../include +LDFLAGS = $(PTHREAD_LIBS) all: testusb ffs-test %: %.c - $(CC) $(CFLAGS) -o $@ $^ + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) clean: $(RM) testusb ffs-test -- cgit v0.10.2 From 1d507b3af40a60e03a3bbc4c897fc2709c075d24 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 4 Dec 2013 08:45:43 -0500 Subject: udl: fix issue with imported prime buffers 5dc9e1e8 was a bit over-ambitious, and accidentially removed handling for imported prime buffers. Signed-off-by: Rob Clark Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c index 24ffbe9..8d67b94 100644 --- a/drivers/gpu/drm/udl/udl_gem.c +++ b/drivers/gpu/drm/udl/udl_gem.c @@ -125,6 +125,12 @@ static int udl_gem_get_pages(struct udl_gem_object *obj, gfp_t gfpmask) static void udl_gem_put_pages(struct udl_gem_object *obj) { + if (obj->base.import_attach) { + drm_free_large(obj->pages); + obj->pages = NULL; + return; + } + drm_gem_put_pages(&obj->base, obj->pages, false, false); obj->pages = NULL; } -- cgit v0.10.2 From 3b59d16c513da258ec8f6a0b4db85f257a0380d6 Mon Sep 17 00:00:00 2001 From: David Cluytens Date: Tue, 3 Dec 2013 14:18:57 +0100 Subject: USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem Signed-off-by: David Cluytens Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3e7560f..e840431 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1515,6 +1515,8 @@ static int acm_reset_resume(struct usb_interface *intf) static const struct usb_device_id acm_ids[] = { /* quirky and broken devices */ + { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */ + .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */ { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v0.10.2 From 0ca223b029a261e82fb2f50c52eb85d510f4260e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Dec 2013 09:24:30 -0500 Subject: drm/radeon: fixup bad vram size on SI Some boards seem to have garbage in the upper 16 bits of the vram size register. Check for this and clamp the size properly. Fixes boards reporting bogus amounts of vram. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 6a64cca..a36736d 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3882,8 +3882,15 @@ static int si_mc_init(struct radeon_device *rdev) rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0); rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0); /* size in MB on si */ - rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; - rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; + tmp = RREG32(CONFIG_MEMSIZE); + /* some boards may have garbage in the upper 16 bits */ + if (tmp & 0xffff0000) { + DRM_INFO("Probable bad vram size: 0x%08x\n", tmp); + if (tmp & 0xffff) + tmp &= 0xffff; + } + rdev->mc.mc_vram_size = tmp * 1024ULL * 1024ULL; + rdev->mc.real_vram_size = rdev->mc.mc_vram_size; rdev->mc.visible_vram_size = rdev->mc.aper_size; si_vram_gtt_location(rdev, &rdev->mc); radeon_update_bandwidth_info(rdev); -- cgit v0.10.2 From 53dc0b0c94907db53444ba485f8ae95111b0d6fd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Dec 2013 17:45:14 -0500 Subject: drm/radeon: fix null pointer dereference in dce6+ audio code Don't crash if the encoder does not have an afmt struct. bug: https://bugs.freedesktop.org/show_bug.cgi?id=72283 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index 009f46e..de86493 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -93,11 +93,13 @@ void dce6_afmt_select_pin(struct drm_encoder *encoder) struct radeon_device *rdev = encoder->dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - u32 offset = dig->afmt->offset; + u32 offset; - if (!dig->afmt->pin) + if (!dig || !dig->afmt || !dig->afmt->pin) return; + offset = dig->afmt->offset; + WREG32(AFMT_AUDIO_SRC_CONTROL + offset, AFMT_AUDIO_SRC_SELECT(dig->afmt->pin->id)); } @@ -112,7 +114,7 @@ void dce6_afmt_write_latency_fields(struct drm_encoder *encoder, struct radeon_connector *radeon_connector = NULL; u32 tmp = 0, offset; - if (!dig->afmt->pin) + if (!dig || !dig->afmt || !dig->afmt->pin) return; offset = dig->afmt->pin->offset; @@ -156,7 +158,7 @@ void dce6_afmt_write_speaker_allocation(struct drm_encoder *encoder) u8 *sadb; int sad_count; - if (!dig->afmt->pin) + if (!dig || !dig->afmt || !dig->afmt->pin) return; offset = dig->afmt->pin->offset; @@ -217,7 +219,7 @@ void dce6_afmt_write_sad_regs(struct drm_encoder *encoder) { AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO }, }; - if (!dig->afmt->pin) + if (!dig || !dig->afmt || !dig->afmt->pin) return; offset = dig->afmt->pin->offset; -- cgit v0.10.2 From ffd3d3361d583cb73fa65a5fed3a196ba6f261bb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Dec 2013 17:16:49 -0500 Subject: drm/radeon/atom: fix bus probes when hw_i2c is set (v2) When probing the bus, we need to set the byte count to 0 rather than 1. v2: Don't count the first byte. bug: https://bugzilla.kernel.org/show_bug.cgi?id=66241 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_i2c.c b/drivers/gpu/drm/radeon/atombios_i2c.c index 0652ee0..f685035dbe 100644 --- a/drivers/gpu/drm/radeon/atombios_i2c.c +++ b/drivers/gpu/drm/radeon/atombios_i2c.c @@ -44,7 +44,7 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan, PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, ProcessI2cChannelTransaction); unsigned char *base; - u16 out; + u16 out = cpu_to_le16(0); memset(&args, 0, sizeof(args)); @@ -55,11 +55,14 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan, DRM_ERROR("hw i2c: tried to write too many bytes (%d vs 3)\n", num); return -EINVAL; } - args.ucRegIndex = buf[0]; - if (num > 1) { + if (buf == NULL) + args.ucRegIndex = 0; + else + args.ucRegIndex = buf[0]; + if (num) num--; + if (num) memcpy(&out, &buf[1], num); - } args.lpI2CDataOut = cpu_to_le16(out); } else { if (num > ATOM_MAX_HW_I2C_READ) { @@ -96,14 +99,14 @@ int radeon_atom_hw_i2c_xfer(struct i2c_adapter *i2c_adap, struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); struct i2c_msg *p; int i, remaining, current_count, buffer_offset, max_bytes, ret; - u8 buf = 0, flags; + u8 flags; /* check for bus probe */ p = &msgs[0]; if ((num == 1) && (p->len == 0)) { ret = radeon_process_i2c_ch(i2c, p->addr, HW_I2C_WRITE, - &buf, 1); + NULL, 0); if (ret) return ret; else -- cgit v0.10.2 From 9876388edfa553960815110acae4544359b385b5 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 15 Nov 2013 14:19:02 +0100 Subject: usb: ohci-pxa27x: include linux/dma-mapping.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Include linux/dma-mapping.h to make the new functions available that are used since 22d9d8e83 ("DMA-API: usb: use dma_set_coherent_mask()"). drivers/usb/host/ohci-pxa27x.c: In function ‘ohci_pxa_of_init’: drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘dma_coerce_mask_and_coherent’ [-Werror=implicit-function-declaration] drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘DMA_BIT_MASK’ [-Werror=implicit-function-declaration] Signed-off-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e89ac4d..9b7435f 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From 2d51f3cd11f414c56a87dc018196b85fd50b04a4 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Thu, 7 Nov 2013 10:59:14 -0800 Subject: usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED This patch adds a check for USB_STATE_NOTATTACHED to the hub_port_warm_reset_required() workaround for ports that end up in Compliance Mode in hub_events() when trying to decide which reset function to use. Trying to call usb_reset_device() with a NOTATTACHED device will just fail and leave the port broken. Signed-off-by: Julius Werner Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a7c04e2..bd9dc35 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4832,8 +4832,9 @@ static void hub_events(void) hub->ports[i - 1]->child; dev_dbg(hub_dev, "warm reset port %d\n", i); - if (!udev || !(portstatus & - USB_PORT_STAT_CONNECTION)) { + if (!udev || + !(portstatus & USB_PORT_STAT_CONNECTION) || + udev->state == USB_STATE_NOTATTACHED) { status = hub_port_reset(hub, i, NULL, HUB_BH_RESET_TIME, true); -- cgit v0.10.2 From 7d14b95f1a3bb20bf7ad977b9268c5d1639156e2 Mon Sep 17 00:00:00 2001 From: Thomas Wood Date: Fri, 29 Nov 2013 15:33:26 +0000 Subject: drm/edid: fix length check when adding extra 3D modes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Thomas Wood Reviewed-by: Ville Syrjälä Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index fb7cf0e..381c698 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2674,7 +2674,7 @@ static int add_3d_struct_modes(struct drm_connector *connector, u16 structure, int modes = 0; u8 cea_mode; - if (video_db == NULL || video_index > video_len) + if (video_db == NULL || video_index >= video_len) return 0; /* CEA modes are numbered 1..127 */ -- cgit v0.10.2 From 89570eeb1720a95cb600b9d132d4fa65d9ae9012 Mon Sep 17 00:00:00 2001 From: Thomas Wood Date: Thu, 28 Nov 2013 15:35:04 +0000 Subject: drm: fix the addition of the side-by-side (half) flag for extra 3D modes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ensure the side-by-side (half) flag is added to any existing flags when adding modes from 3D_Structure_ALL. Signed-off-by: Thomas Wood Reviewed-by: Ville Syrjälä Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 381c698..0a1e4a5 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2701,7 +2701,7 @@ static int add_3d_struct_modes(struct drm_connector *connector, u16 structure, if (structure & (1 << 8)) { newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); if (newmode) { - newmode->flags = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; + newmode->flags |= DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; drm_mode_probed_add(connector, newmode); modes++; } -- cgit v0.10.2 From 8a37ea50e7acf8db6821ba094ca41384e7d8c70c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 5 Dec 2013 02:01:55 +0100 Subject: PNP: fix restoring devices after hibernation On returning from hibernation 'restore' callback is called, not 'resume'. Fix it. Fixes: eaf140b60ec9 (PNP: convert PNP driver bus legacy pm_ops to dev_pm_ops) Signed-off-by: Dmitry Torokhov Cc: 3.12+ # 3.12+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index 6936e0a..f748cc8 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -197,6 +197,11 @@ static int pnp_bus_freeze(struct device *dev) return __pnp_bus_suspend(dev, PMSG_FREEZE); } +static int pnp_bus_poweroff(struct device *dev) +{ + return __pnp_bus_suspend(dev, PMSG_HIBERNATE); +} + static int pnp_bus_resume(struct device *dev) { struct pnp_dev *pnp_dev = to_pnp_dev(dev); @@ -234,9 +239,14 @@ static int pnp_bus_resume(struct device *dev) } static const struct dev_pm_ops pnp_bus_dev_pm_ops = { + /* Suspend callbacks */ .suspend = pnp_bus_suspend, - .freeze = pnp_bus_freeze, .resume = pnp_bus_resume, + /* Hibernate callbacks */ + .freeze = pnp_bus_freeze, + .thaw = pnp_bus_resume, + .poweroff = pnp_bus_poweroff, + .restore = pnp_bus_resume, }; struct bus_type pnp_bus_type = { -- cgit v0.10.2 From 95677a9a3847de4f37e0f463aeb94aa8d5cccc50 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 4 Dec 2013 11:12:59 -0800 Subject: PowerCap: Fix mode for energy counter As per the documentation of powercap sysfs, energy_uj field is read only, if it can't be reset. Currently it always allows write but will fail, if there is no reset callback. Changing mode field, to read only if there is no reset callback. Signed-off-by: Srinivas Pandruvada Reported-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c index 8d0fe43..84419af 100644 --- a/drivers/powercap/powercap_sys.c +++ b/drivers/powercap/powercap_sys.c @@ -377,9 +377,14 @@ static void create_power_zone_common_attributes( if (power_zone->ops->get_max_energy_range_uj) power_zone->zone_dev_attrs[count++] = &dev_attr_max_energy_range_uj.attr; - if (power_zone->ops->get_energy_uj) + if (power_zone->ops->get_energy_uj) { + if (power_zone->ops->reset_energy_uj) + dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUGO; + else + dev_attr_energy_uj.attr.mode = S_IRUGO; power_zone->zone_dev_attrs[count++] = &dev_attr_energy_uj.attr; + } if (power_zone->ops->get_power_uw) power_zone->zone_dev_attrs[count++] = &dev_attr_power_uw.attr; -- cgit v0.10.2 From 2885432aaf15c1b7e65c787bfe7c5fec428296f0 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Wed, 4 Dec 2013 16:07:49 -0800 Subject: x86/apic, doc: Justification for disabling IO APIC before Local APIC Since erratum AVR31 in "Intel Atom Processor C2000 Product Family Specification Update" is now published, I added a justification comment for disabling IO APIC before Local APIC, as changed in commit: 522e66464467 x86/apic: Disable I/O APIC before shutdown of the local APIC Signed-off-by: Fenghua Yu Link: http://lkml.kernel.org/r/1386202069-51515-1-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index da3c599..c752cb4 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -558,6 +558,17 @@ void native_machine_shutdown(void) { /* Stop the cpus and apics */ #ifdef CONFIG_X86_IO_APIC + /* + * Disabling IO APIC before local APIC is a workaround for + * erratum AVR31 in "Intel Atom Processor C2000 Product Family + * Specification Update". In this situation, interrupts that target + * a Logical Processor whose Local APIC is either in the process of + * being hardware disabled or software disabled are neither delivered + * nor discarded. When this erratum occurs, the processor may hang. + * + * Even without the erratum, it still makes sense to quiet IO APIC + * before disabling Local APIC. + */ disable_IO_APIC(); #endif -- cgit v0.10.2 From 9aa5b0181bdf335f0b731d8502e128a862884bcd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 3 Dec 2013 13:56:56 -0800 Subject: drivers/char/i8k.c: add Dell XPLS L421X Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772 Signed-off-by: Alan Cox Reported-by: Leho Kraav Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 40cc0cf2..e6939e1 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -664,6 +664,13 @@ static struct dmi_system_id __initdata i8k_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"), }, }, + { + .ident = "Dell XPS421", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"), + }, + }, { } }; -- cgit v0.10.2 From b1e8972e398aa9f1d022cec5946691d091dfd9cc Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 4 Dec 2013 20:50:53 +0100 Subject: ALSA: hda - fix mic issues on Acer Aspire E-572 This patch add quirk for Acer Aspire E-572: - fix external mic - limit mic boost for internal mic with maximal noise level of -24dB Signed-off-by: Oleksij Rempel Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c5ea483..f27272a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3849,6 +3849,7 @@ enum { ALC269_FIXUP_ASUS_X101, ALC271_FIXUP_AMIC_MIC2, ALC271_FIXUP_HP_GATE_MIC_JACK, + ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572, ALC269_FIXUP_ACER_AC700, ALC269_FIXUP_LIMIT_INT_MIC_BOOST, ALC269VB_FIXUP_ASUS_ZENBOOK, @@ -4111,6 +4112,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC271_FIXUP_AMIC_MIC2, }, + [ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_limit_int_mic_boost, + .chained = true, + .chain_id = ALC271_FIXUP_HP_GATE_MIC_JACK, + }, [ALC269_FIXUP_ACER_AC700] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -4208,6 +4215,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC), + SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), SND_PCI_QUIRK(0x1028, 0x05bd, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05be, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), -- cgit v0.10.2 From cf30d52e2d11523c42048ab89ed4215b5021526a Mon Sep 17 00:00:00 2001 From: Maria Dimakopoulou Date: Thu, 5 Dec 2013 01:24:37 +0200 Subject: perf/x86: Fix constraint table end marker bug The EVENT_CONSTRAINT_END() macro defines the end marker as a constraint with a weight of zero. This was all fine until we blacklisted the corrupting memory events on Intel IvyBridge. These events are blacklisted by using a counter bitmask of zero. Thus, they also get a constraint weight of zero. The iteration macro: for_each_constraint tests the weight==0. Therefore, it was stopping at the first blacklisted event, i.e., 0xd0. The corrupting events were therefore considered as unconstrained and were scheduled on any of the generic counters. This patch fixes the end marker to have a weight of -1. With this, the blacklisted events get an empty constraint and cannot be scheduled which is what we want for now. Signed-off-by: Maria Dimakopoulou Reviewed-by: Stephane Eranian Cc: peterz@infradead.org Cc: ak@linux.intel.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Link: http://lkml.kernel.org/r/20131204232437.GA10689@starlight Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index fd00bb2..c1a8618 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -262,11 +262,20 @@ struct cpu_hw_events { __EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK, \ HWEIGHT(n), 0, PERF_X86_EVENT_PEBS_ST_HSW) -#define EVENT_CONSTRAINT_END \ - EVENT_CONSTRAINT(0, 0, 0) +/* + * We define the end marker as having a weight of -1 + * to enable blacklisting of events using a counter bitmask + * of zero and thus a weight of zero. + * The end marker has a weight that cannot possibly be + * obtained from counting the bits in the bitmask. + */ +#define EVENT_CONSTRAINT_END { .weight = -1 } +/* + * Check for end marker with weight == -1 + */ #define for_each_event_constraint(e, c) \ - for ((e) = (c); (e)->weight; (e)++) + for ((e) = (c); (e)->weight != -1; (e)++) /* * Extra registers for specific events. -- cgit v0.10.2 From 76a9635979e543f04a5885198e68ff28e3311b67 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 5 Dec 2013 09:34:44 +0200 Subject: mei: add 9 series PCH mei device ids And Lynx Point H Refresh and Wildcat Point LP device ids. Signed-off-by: Tomas Winkler Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 6c0fde5..66f411a 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -109,9 +109,12 @@ #define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */ #define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */ -#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */ +#define MEI_DEV_ID_LPT_H 0x8C3A /* Lynx Point H */ #define MEI_DEV_ID_LPT_W 0x8D3A /* Lynx Point - Wellsburg */ #define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */ +#define MEI_DEV_ID_LPT_HR 0x8CBA /* Lynx Point H Refresh */ + +#define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */ /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index b96205a..2cab3c0 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -76,9 +76,11 @@ static DEFINE_PCI_DEVICE_TABLE(mei_me_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_H)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_W)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_HR)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_WPT_LP)}, /* required last entry */ {0, } -- cgit v0.10.2 From 0d11e6aca396e679c07b2dd6af5dc8b7f041fbbd Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 5 Dec 2013 10:50:39 -0700 Subject: blk-mq: fix use-after-free of request If accounting is on, we will do the IO completion accounting after we have freed the request. Fix that by moving it sooner instead. Signed-off-by: Jens Axboe diff --git a/block/blk-mq.c b/block/blk-mq.c index 70fd6f9..c79126e 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -312,12 +312,12 @@ void blk_mq_complete_request(struct request *rq, int error) blk_account_io_completion(rq, bytes); + blk_account_io_done(rq); + if (rq->end_io) rq->end_io(rq, error); else blk_mq_free_request(rq); - - blk_account_io_done(rq); } void __blk_mq_end_io(struct request *rq, int error) -- cgit v0.10.2 From 3ccb01239201af06a07482ec686b14cd148102a5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 3 Dec 2013 12:41:20 -0500 Subject: tracing: Only run synchronize_sched() at instance deletion time It has been reported that boot up with FTRACE_SELFTEST enabled can take a very long time. There can be stalls of over a minute. This was tracked down to the synchronize_sched() called when a system call event is disabled. As the self tests enable and disable thousands of events, this makes the synchronize_sched() get called thousands of times. The synchornize_sched() was added with d562aff93bfb53 "tracing: Add support for SOFT_DISABLE to syscall events" which caused this regression (added in 3.13-rc1). The synchronize_sched() is to protect against the events being accessed when a tracer instance is being deleted. When an instance is being deleted all the events associated to it are unregistered. The synchronize_sched() makes sure that no more users are running when it finishes. Instead of calling synchronize_sched() for all syscall events, we only need to call it once, after the events are unregistered and before the instance is deleted. The event_mutex is held during this action to prevent new users from enabling events. Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home Reported-by: Petr Mladek Acked-by: Tom Zanussi Acked-by: Petr Mladek Tested-by: Petr Mladek Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index f919a2e..a11800a 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2314,6 +2314,9 @@ int event_trace_del_tracer(struct trace_array *tr) /* Disable any running events */ __ftrace_set_clr_event_nolock(tr, NULL, NULL, NULL, 0); + /* Access to events are within rcu_read_lock_sched() */ + synchronize_sched(); + down_write(&trace_event_sem); __trace_remove_event_dirs(tr); debugfs_remove_recursive(tr->event_dir); diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index e4b6d11..ea90eb5 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -431,11 +431,6 @@ static void unreg_event_syscall_enter(struct ftrace_event_file *file, if (!tr->sys_refcount_enter) unregister_trace_sys_enter(ftrace_syscall_enter, tr); mutex_unlock(&syscall_trace_lock); - /* - * Callers expect the event to be completely disabled on - * return, so wait for current handlers to finish. - */ - synchronize_sched(); } static int reg_event_syscall_exit(struct ftrace_event_file *file, @@ -474,11 +469,6 @@ static void unreg_event_syscall_exit(struct ftrace_event_file *file, if (!tr->sys_refcount_exit) unregister_trace_sys_exit(ftrace_syscall_exit, tr); mutex_unlock(&syscall_trace_lock); - /* - * Callers expect the event to be completely disabled on - * return, so wait for current handlers to finish. - */ - synchronize_sched(); } static int __init init_syscall_trace(struct ftrace_event_call *call) -- cgit v0.10.2 From 18e4753ff3c8f5a1f21d8ec7ab506c49a0dfb32f Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 5 Dec 2013 14:32:43 -0500 Subject: ALSA: usb-audio: fix uninitialized variable compile warning Fix the following warning when optimizing for size with gcc-4.6.4: sound/usb/mixer_quirks.c:1514:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Mikulas Patocka Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 3454262..f4b12c2 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -1603,7 +1603,7 @@ static int snd_microii_controls_create(struct usb_mixer_interface *mixer) return err; } - return err; + return 0; } int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) -- cgit v0.10.2 From 3b5a7ab40c2a1bfd89dd5b4bbfe98f8692d5fd62 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 5 Dec 2013 12:42:09 -0800 Subject: Input: add SW_MUTE_DEVICE switch definition Some devices, such as new Intuos series tablets, have a hardware switch to turn touch data on/off. To report the state, SW_MUTE_DEVICE is added in include/uapi/linux/input.h. Reviewed_by: Chris Bagwell Acked-by: Peter Hutterer Tested-by: Jason Gerecke Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 7bacdb5..ecc8859 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -858,6 +858,7 @@ struct input_keymap_entry { #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ +#define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) -- cgit v0.10.2 From 9cb80b965eaf7af1369f6e16f48a05fbaaccc021 Mon Sep 17 00:00:00 2001 From: Matt Walker Date: Thu, 5 Dec 2013 12:39:02 -0800 Subject: Input: elantech - add support for newer (August 2013) devices Added detection for newer Elantech touchpads, so that kernel doesn't fall-back to default PS/2 driver. Supports touchpads released after ~August 2013. Fixes bug: https://lists.launchpad.net/kernel-packages/msg18481.html Tested on an Acer Aspire S7-392-6302. Signed-off by: Matt Walker Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 8551dca..597e9b8 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1313,6 +1313,7 @@ static int elantech_set_properties(struct elantech_data *etd) break; case 6: case 7: + case 8: etd->hw_version = 4; break; default: -- cgit v0.10.2 From 95f75e91588afecfb0090988393653d21f5d1f91 Mon Sep 17 00:00:00 2001 From: Yunkang Tang Date: Sun, 1 Dec 2013 22:33:52 -0800 Subject: Input: ALPS - add support for DualPoint device on Dell XT2 model The device uses special MPU controller that necessitates the new initialization sequence for the device. We also define a new protocol for the trackpad that allows reporting better resolution than older V2 protocol. Signed-off-by: Yunkang Tang Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index ca7a26f..5cf62e3 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -70,6 +70,25 @@ static const struct alps_nibble_commands alps_v4_nibble_commands[] = { { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ }; +static const struct alps_nibble_commands alps_v6_nibble_commands[] = { + { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */ + { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */ + { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* d */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ #define ALPS_PASS 0x04 /* device has a pass-through port */ @@ -103,6 +122,7 @@ static const struct alps_model_info alps_model_data[] = { /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, + { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT }, /* Dell XT2 */ { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ @@ -645,6 +665,76 @@ static void alps_process_packet_v3(struct psmouse *psmouse) alps_process_touchpad_packet_v3(psmouse); } +static void alps_process_packet_v6(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x, y, z, left, right, middle; + + /* + * We can use Byte5 to distinguish if the packet is from Touchpad + * or Trackpoint. + * Touchpad: 0 - 0x7E + * Trackpoint: 0x7F + */ + if (packet[5] == 0x7F) { + /* It should be a DualPoint when received Trackpoint packet */ + if (!(priv->flags & ALPS_DUALPOINT)) + return; + + /* Trackpoint packet */ + x = packet[1] | ((packet[3] & 0x20) << 2); + y = packet[2] | ((packet[3] & 0x40) << 1); + z = packet[4]; + left = packet[3] & 0x01; + right = packet[3] & 0x02; + middle = packet[3] & 0x04; + + /* To prevent the cursor jump when finger lifted */ + if (x == 0x7F && y == 0x7F && z == 0x7F) + x = y = z = 0; + + /* Divide 4 since trackpoint's speed is too fast */ + input_report_rel(dev2, REL_X, (char)x / 4); + input_report_rel(dev2, REL_Y, -((char)y / 4)); + + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + input_report_key(dev2, BTN_MIDDLE, middle); + + input_sync(dev2); + return; + } + + /* Touchpad packet */ + x = packet[1] | ((packet[3] & 0x78) << 4); + y = packet[2] | ((packet[4] & 0x78) << 4); + z = packet[5]; + left = packet[3] & 0x01; + right = packet[3] & 0x02; + + if (z > 30) + input_report_key(dev, BTN_TOUCH, 1); + if (z < 25) + input_report_key(dev, BTN_TOUCH, 0); + + if (z > 0) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } + + input_report_abs(dev, ABS_PRESSURE, z); + input_report_key(dev, BTN_TOOL_FINGER, z > 0); + + /* v6 touchpad does not have middle button */ + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + + input_sync(dev); +} + static void alps_process_packet_v4(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -897,7 +987,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) } /* Bytes 2 - pktsize should have 0 in the highest bit */ - if (priv->proto_version != ALPS_PROTO_V5 && + if ((priv->proto_version < ALPS_PROTO_V5) && psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", @@ -1085,6 +1175,80 @@ static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL); } +static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word) +{ + int i, nibble; + + /* + * b0-b11 are valid bits, send sequence is inverse. + * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1 + */ + for (i = 0; i <= 8; i += 4) { + nibble = (word >> i) & 0xf; + if (alps_command_mode_send_nibble(psmouse, nibble)) + return -1; + } + + return 0; +} + +static int alps_monitor_mode_write_reg(struct psmouse *psmouse, + u16 addr, u16 value) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + /* 0x0A0 is the command to write the word */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) || + alps_monitor_mode_send_word(psmouse, 0x0A0) || + alps_monitor_mode_send_word(psmouse, addr) || + alps_monitor_mode_send_word(psmouse, value) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) + return -1; + + return 0; +} + +static int alps_monitor_mode(struct psmouse *psmouse, bool enable) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (enable) { + /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO)) + return -1; + } else { + /* EC to exit monitor mode */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP)) + return -1; + } + + return 0; +} + +static int alps_absolute_mode_v6(struct psmouse *psmouse) +{ + u16 reg_val = 0x181; + int ret = -1; + + /* enter monitor mode, to write the register */ + if (alps_monitor_mode(psmouse, true)) + return -1; + + ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val); + + if (alps_monitor_mode(psmouse, false)) + ret = -1; + + return ret; +} + static int alps_get_status(struct psmouse *psmouse, char *param) { /* Get status: 0xF5 0xF5 0xF5 0xE9 */ @@ -1189,6 +1353,32 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse) return 0; } +static int alps_hw_init_v6(struct psmouse *psmouse) +{ + unsigned char param[2] = {0xC8, 0x14}; + + /* Enter passthrough mode to let trackpoint enter 6byte raw mode */ + if (alps_passthrough_mode_v2(psmouse, true)) + return -1; + + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) + return -1; + + if (alps_passthrough_mode_v2(psmouse, false)) + return -1; + + if (alps_absolute_mode_v6(psmouse)) { + psmouse_err(psmouse, "Failed to enable absolute mode\n"); + return -1; + } + + return 0; +} + /* * Enable or disable passthrough mode to the trackstick. */ @@ -1553,6 +1743,8 @@ static void alps_set_defaults(struct alps_data *priv) priv->hw_init = alps_hw_init_v1_v2; priv->process_packet = alps_process_packet_v1_v2; priv->set_abs_params = alps_set_abs_params_st; + priv->x_max = 1023; + priv->y_max = 767; break; case ALPS_PROTO_V3: priv->hw_init = alps_hw_init_v3; @@ -1584,6 +1776,14 @@ static void alps_set_defaults(struct alps_data *priv) priv->x_bits = 23; priv->y_bits = 12; break; + case ALPS_PROTO_V6: + priv->hw_init = alps_hw_init_v6; + priv->process_packet = alps_process_packet_v6; + priv->set_abs_params = alps_set_abs_params_st; + priv->nibble_commands = alps_v6_nibble_commands; + priv->x_max = 2047; + priv->y_max = 1535; + break; } } @@ -1705,8 +1905,8 @@ static void alps_disconnect(struct psmouse *psmouse) static void alps_set_abs_params_st(struct alps_data *priv, struct input_dev *dev1) { - input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); } static void alps_set_abs_params_mt(struct alps_data *priv, diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index eee5985..704f0f9 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -17,6 +17,7 @@ #define ALPS_PROTO_V3 3 #define ALPS_PROTO_V4 4 #define ALPS_PROTO_V5 5 +#define ALPS_PROTO_V6 6 /** * struct alps_model_info - touchpad ID table -- cgit v0.10.2 From 2d8eedad9233d4771fb3134f50e5c5a09e28352c Mon Sep 17 00:00:00 2001 From: Tony Lu Date: Thu, 5 Dec 2013 15:36:54 -0500 Subject: ftrace: default to tilegx if ARCH=tile is specified This matches the existing behavior in arch/tile/Makefile for defconfig. Reported-by: fengguang.wu@intel.com Acked-by: Steven Rostedt Signed-off-by: Tony Lu Signed-off-by: Chris Metcalf diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index d0da663..91280b8 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -364,7 +364,8 @@ if ($arch eq "x86_64") { } elsif ($arch eq "blackfin") { $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$"; $mcount_adjust = -4; -} elsif ($arch eq "tilegx") { +} elsif ($arch eq "tilegx" || $arch eq "tile") { + # Default to the newer TILE-Gx architecture if only "tile" is given. $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$"; $type = ".quad"; $alignment = 8; -- cgit v0.10.2 From 31660e9084dfc44592051bc40882a54036f17a78 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 6 Dec 2013 11:54:57 +0800 Subject: ALSA: hda - Remove quirk for Dell Vostro 131 I've tested the old Dell Vostro 131 with the latest generic parser and it works just fine, and as a bonus we get better jack detection features in userspace. Therefore this quirk can be removed. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 1f2717f..3fbf288 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2936,7 +2936,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0401, "Dell Vostro 1014", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x050f, "Dell Inspiron", CXT5066_IDEAPAD), - SND_PCI_QUIRK(0x1028, 0x0510, "Dell Vostro", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP), SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_ASUS), SND_PCI_QUIRK(0x1043, 0x1643, "Asus K52JU", CXT5066_ASUS), -- cgit v0.10.2 From f742a55231b950ed71ac8cc8beec0944ddda312c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 6 Dec 2013 10:17:53 +0100 Subject: drm/i915: fix pm init ordering Shovel a bit more of the the code into the setup function, and call it earlier. Otherwise lockdep is unhappy since we cancel the delayed resume work before it's initialized. While at it also shovel the pc8 setup code into the same functions. I wanted to also ditch the header declaration of the hws pc8 functions, but for unfathomable reasons that stuff is in intel_display.c instead of intel_pm.c. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71980 Tested-by: Guo Jinxian Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ac9dac9..197db09 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1490,16 +1490,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) spin_lock_init(&dev_priv->uncore.lock); spin_lock_init(&dev_priv->mm.object_stat_lock); mutex_init(&dev_priv->dpio_lock); - mutex_init(&dev_priv->rps.hw_lock); mutex_init(&dev_priv->modeset_restore_lock); - mutex_init(&dev_priv->pc8.lock); - dev_priv->pc8.requirements_met = false; - dev_priv->pc8.gpu_idle = false; - dev_priv->pc8.irqs_disabled = false; - dev_priv->pc8.enabled = false; - dev_priv->pc8.disable_count = 2; /* requirements_met + gpu_idle */ - INIT_DELAYED_WORK(&dev_priv->pc8.enable_work, hsw_enable_pc8_work); + intel_pm_setup(dev); intel_display_crc_init(dev); @@ -1603,7 +1596,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) } intel_irq_init(dev); - intel_pm_init(dev); intel_uncore_sanitize(dev); /* Try to make sure MCHBAR is enabled before poking at it */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ccdbecc..6f04fa4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1901,9 +1901,7 @@ void i915_queue_hangcheck(struct drm_device *dev); void i915_handle_error(struct drm_device *dev, bool wedged); extern void intel_irq_init(struct drm_device *dev); -extern void intel_pm_init(struct drm_device *dev); extern void intel_hpd_init(struct drm_device *dev); -extern void intel_pm_init(struct drm_device *dev); extern void intel_uncore_sanitize(struct drm_device *dev); extern void intel_uncore_early_sanitize(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index a18e88b..79f91f2 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -821,6 +821,7 @@ void intel_update_sprite_watermarks(struct drm_plane *plane, uint32_t sprite_width, int pixel_size, bool enabled, bool scaled); void intel_init_pm(struct drm_device *dev); +void intel_pm_setup(struct drm_device *dev); bool intel_fbc_enabled(struct drm_device *dev); void intel_update_fbc(struct drm_device *dev); void intel_gpu_ips_init(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 6e0d5e0..e0dec95 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6130,10 +6130,19 @@ int vlv_freq_opcode(int ddr_freq, int val) return val; } -void intel_pm_init(struct drm_device *dev) +void intel_pm_setup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + mutex_init(&dev_priv->rps.hw_lock); + + mutex_init(&dev_priv->pc8.lock); + dev_priv->pc8.requirements_met = false; + dev_priv->pc8.gpu_idle = false; + dev_priv->pc8.irqs_disabled = false; + dev_priv->pc8.enabled = false; + dev_priv->pc8.disable_count = 2; /* requirements_met + gpu_idle */ + INIT_DELAYED_WORK(&dev_priv->pc8.enable_work, hsw_enable_pc8_work); INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, intel_gen6_powersave_work); } -- cgit v0.10.2 From acc240d41ea1ab9c488a79219fb313b5b46265ae Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 5 Dec 2013 15:42:34 +0100 Subject: drm/i915: Fix use-after-free in do_switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So apparently under ridiculous amounts of memory pressure we can get into trouble in do_switch when we try to move the old hw context backing storage object onto the active lists. With list debugging enabled that usually results in us chasing a poisoned pointer - which means we've hit upon a vma that has been removed from all lrus with list_del (and then deallocated, so it's a real use-after free). Ian Lister has done some great callchain chasing and noticed that we can reenter do_switch: i915_gem_do_execbuffer() i915_switch_context() do_switch() from = ring->last_context; i915_gem_object_pin() i915_gem_object_bind_to_gtt() ret = drm_mm_insert_node_in_range_generic(); // If the above call fails then it will try i915_gem_evict_something() // If that fails it will call i915_gem_evict_everything() ... i915_gem_evict_everything() i915_gpu_idle() i915_switch_context(DEFAULT_CONTEXT) Like with everything else where the shrinker or eviction code can invalidate pointers we need to reload relevant state. Note that there's no need to recheck whether a context switch is still required because: - Doing a switch to the same context is harmless (besides wasting a bit of energy). - This can only happen with the default context. But since that one's pinned we'll never call down into evict_everything under normal circumstances. Note that there's a little driver bringup fun involved namely that we could recourse into do_switch for the initial switch. Atm we're fine since we assign the context pointer only after the call to do_switch at driver load or resume time. And in the gpu reset case we skip the entire setup sequence (which might be a bug on its own, but definitely not this one here). Cc'ing stable since apparently ChromeOS guys are seeing this in the wild (and not just on artificial stress tests), see the reference. Note that in upstream code doesn't calle evict_everything directly from evict_something, that's an extension in this product branch. But we can still hit upon this bug (and apparently we do, see the linked backtraces). I've noticed this while trying to construct a testcase for this bug and utterly failed to provoke it. It looks like we need to driver the system squarly into the lowmem wall and provoke the shrinker to evict the context object by doing the last-ditch evict_everything call. Aside: There's currently no means to get a badly-fragmenting hw context object away from a bad spot in the upstream code. We should fix this by at least adding some code to evict_something to handle hw contexts. References: https://code.google.com/p/chromium/issues/detail?id=248191 Reported-by: Ian Lister Cc: Ian Lister Cc: stable@vger.kernel.org Cc: Ben Widawsky Cc: Stéphane Marchesin Cc: Bloomfield, Jon Tested-by: Rafael Barbalho Reviewed-by: Ian Lister Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 4a05956..b0f42b9 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -421,11 +421,21 @@ static int do_switch(struct i915_hw_context *to) if (ret) return ret; - /* Clear this page out of any CPU caches for coherent swap-in/out. Note + /* + * Pin can switch back to the default context if we end up calling into + * evict_everything - as a last ditch gtt defrag effort that also + * switches to the default context. Hence we need to reload from here. + */ + from = ring->last_context; + + /* + * Clear this page out of any CPU caches for coherent swap-in/out. Note * that thanks to write = false in this call and us not setting any gpu * write domains when putting a context object onto the active list * (when switching away from it), this won't block. - * XXX: We need a real interface to do this instead of trickery. */ + * + * XXX: We need a real interface to do this instead of trickery. + */ ret = i915_gem_object_set_to_gtt_domain(to->obj, false); if (ret) { i915_gem_object_unpin(to->obj); -- cgit v0.10.2 From d1b9432712a25eeb06114fb4b587133525a47de5 Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Wed, 4 Dec 2013 18:19:06 +0800 Subject: aio: clean up aio ring in the fail path Clean up the aio ring file in the fail path of aio_setup_ring and ioctx_alloc. And maybe it can fix the GPF issue reported by Dave Jones: https://lkml.org/lkml/2013/11/25/898 Signed-off-by: Gu Zheng Signed-off-by: Benjamin LaHaise diff --git a/fs/aio.c b/fs/aio.c index ad460d7..a2f92aa 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -316,8 +316,10 @@ static int aio_setup_ring(struct kioctx *ctx) if (nr_pages > AIO_RING_PAGES) { ctx->ring_pages = kcalloc(nr_pages, sizeof(struct page *), GFP_KERNEL); - if (!ctx->ring_pages) + if (!ctx->ring_pages) { + put_aio_ring_file(ctx); return -ENOMEM; + } } ctx->mmap_size = nr_pages * PAGE_SIZE; @@ -594,7 +596,7 @@ static struct kioctx *ioctx_alloc(unsigned nr_events) aio_nr + nr_events < aio_nr) { spin_unlock(&aio_nr_lock); err = -EAGAIN; - goto err; + goto err_ctx; } aio_nr += ctx->max_reqs; spin_unlock(&aio_nr_lock); @@ -611,6 +613,8 @@ static struct kioctx *ioctx_alloc(unsigned nr_events) err_cleanup: aio_nr_sub(ctx->max_reqs); +err_ctx: + aio_free_ring(ctx); err: free_percpu(ctx->cpu); free_percpu(ctx->reqs.pcpu_count); -- cgit v0.10.2 From a44a9791e778d9ccda50d5534028ed4057a9a45b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 7 Nov 2013 18:47:50 +0000 Subject: iommu/arm-smmu: use mutex instead of spinlock for locking page tables When creating IO mappings, we lazily allocate our page tables using the standard, non-atomic allocator functions. This presents us with a problem, since our page tables are protected with a spinlock. This patch reworks the smmu_domain lock to use a mutex instead of a spinlock. iova_to_phys is then reworked so that it only reads the page tables, and can run in a lockless fashion, leaving the mutex to guard against concurrent mapping threads. Cc: Signed-off-by: Will Deacon diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 1abfb56..6dbcaa4 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -392,7 +392,7 @@ struct arm_smmu_domain { struct arm_smmu_cfg root_cfg; phys_addr_t output_mask; - spinlock_t lock; + struct mutex lock; }; static DEFINE_SPINLOCK(arm_smmu_devices_lock); @@ -900,7 +900,7 @@ static int arm_smmu_domain_init(struct iommu_domain *domain) goto out_free_domain; smmu_domain->root_cfg.pgd = pgd; - spin_lock_init(&smmu_domain->lock); + mutex_init(&smmu_domain->lock); domain->priv = smmu_domain; return 0; @@ -1137,7 +1137,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) * Sanity check the domain. We don't currently support domains * that cross between different SMMU chains. */ - spin_lock(&smmu_domain->lock); + mutex_lock(&smmu_domain->lock); if (!smmu_domain->leaf_smmu) { /* Now that we have a master, we can finalise the domain */ ret = arm_smmu_init_domain_context(domain, dev); @@ -1152,7 +1152,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) dev_name(device_smmu->dev)); goto err_unlock; } - spin_unlock(&smmu_domain->lock); + mutex_unlock(&smmu_domain->lock); /* Looks ok, so add the device to the domain */ master = find_smmu_master(smmu_domain->leaf_smmu, dev->of_node); @@ -1162,7 +1162,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) return arm_smmu_domain_add_master(smmu_domain, master); err_unlock: - spin_unlock(&smmu_domain->lock); + mutex_unlock(&smmu_domain->lock); return ret; } @@ -1394,7 +1394,7 @@ static int arm_smmu_handle_mapping(struct arm_smmu_domain *smmu_domain, if (paddr & ~output_mask) return -ERANGE; - spin_lock(&smmu_domain->lock); + mutex_lock(&smmu_domain->lock); pgd += pgd_index(iova); end = iova + size; do { @@ -1410,7 +1410,7 @@ static int arm_smmu_handle_mapping(struct arm_smmu_domain *smmu_domain, } while (pgd++, iova != end); out_unlock: - spin_unlock(&smmu_domain->lock); + mutex_unlock(&smmu_domain->lock); /* Ensure new page tables are visible to the hardware walker */ if (smmu->features & ARM_SMMU_FEAT_COHERENT_WALK) @@ -1449,44 +1449,34 @@ static size_t arm_smmu_unmap(struct iommu_domain *domain, unsigned long iova, static phys_addr_t arm_smmu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; + pgd_t *pgdp, pgd; + pud_t pud; + pmd_t pmd; + pte_t pte; struct arm_smmu_domain *smmu_domain = domain->priv; struct arm_smmu_cfg *root_cfg = &smmu_domain->root_cfg; - struct arm_smmu_device *smmu = root_cfg->smmu; - spin_lock(&smmu_domain->lock); - pgd = root_cfg->pgd; - if (!pgd) - goto err_unlock; + pgdp = root_cfg->pgd; + if (!pgdp) + return 0; - pgd += pgd_index(iova); - if (pgd_none_or_clear_bad(pgd)) - goto err_unlock; + pgd = *(pgdp + pgd_index(iova)); + if (pgd_none(pgd)) + return 0; - pud = pud_offset(pgd, iova); - if (pud_none_or_clear_bad(pud)) - goto err_unlock; + pud = *pud_offset(&pgd, iova); + if (pud_none(pud)) + return 0; - pmd = pmd_offset(pud, iova); - if (pmd_none_or_clear_bad(pmd)) - goto err_unlock; + pmd = *pmd_offset(&pud, iova); + if (pmd_none(pmd)) + return 0; - pte = pmd_page_vaddr(*pmd) + pte_index(iova); + pte = *(pmd_page_vaddr(pmd) + pte_index(iova)); if (pte_none(pte)) - goto err_unlock; - - spin_unlock(&smmu_domain->lock); - return __pfn_to_phys(pte_pfn(*pte)) | (iova & ~PAGE_MASK); + return 0; -err_unlock: - spin_unlock(&smmu_domain->lock); - dev_warn(smmu->dev, - "invalid (corrupt?) page tables detected for iova 0x%llx\n", - (unsigned long long)iova); - return -EINVAL; + return __pfn_to_phys(pte_pfn(pte)) | (iova & ~PAGE_MASK); } static int arm_smmu_domain_has_cap(struct iommu_domain *domain, -- cgit v0.10.2 From 5552ecdbf9fb4f7608c1d7933a8baafcfa1bb337 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Nov 2013 15:08:06 +0000 Subject: iommu/arm-smmu: remove potential NULL dereference on mapping path When handling mapping requests, we dereference the SMMU domain before checking that it is NULL. This patch fixes the issue by removing the check altogether, since we don't actually use the leaf_smmu when creating mappings. Reported-by: Dan Carpenter Signed-off-by: Will Deacon diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 6dbcaa4..ef77e3d 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1423,9 +1423,8 @@ static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova, phys_addr_t paddr, size_t size, int flags) { struct arm_smmu_domain *smmu_domain = domain->priv; - struct arm_smmu_device *smmu = smmu_domain->leaf_smmu; - if (!smmu_domain || !smmu) + if (!smmu_domain) return -ENODEV; /* Check for silent address truncation up the SMMU chain. */ -- cgit v0.10.2 From 89a23cde75a7f0b3d8b0c156964eca0c23d2f1eb Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 09:42:30 +0000 Subject: iommu/arm-smmu: fix error return code in arm_smmu_device_dt_probe() Fix to return -ENODEV instead of 0 when context interrupt number does no match in arm_smmu_device_dt_probe(). Signed-off-by: Wei Yongjun Signed-off-by: Will Deacon diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index ef77e3d..e46a887 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1852,6 +1852,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) dev_err(dev, "found only %d context interrupt(s) but %d required\n", smmu->num_context_irqs, smmu->num_context_banks); + err = -ENODEV; goto out_put_parent; } -- cgit v0.10.2 From 3cea71bc6b470372ae407881b87128aadf0afec0 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Mon, 2 Dec 2013 16:11:00 +0000 Subject: arm64: ensure completion of TLB invalidatation Currently there is no dsb between the tlbi in __cpu_setup and the write to SCTLR_EL1 which enables the MMU in __turn_mmu_on. This means that the TLB invalidation is not guaranteed to have completed at the point address translation is enabled, leading to a number of possible issues including incorrect translations and TLB conflict faults. This patch moves the tlbi in __cpu_setup above an existing dsb used to synchronise I-cache invalidation, ensuring that the TLBs have been invalidated at the point the MMU is enabled. Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Signed-off-by: Catalin Marinas diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 421b99f..0f7fec5 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -111,12 +111,12 @@ ENTRY(__cpu_setup) bl __flush_dcache_all mov lr, x28 ic iallu // I+BTB cache invalidate + tlbi vmalle1is // invalidate I + D TLBs dsb sy mov x0, #3 << 20 msr cpacr_el1, x0 // Enable FP/ASIMD msr mdscr_el1, xzr // Reset mdscr_el1 - tlbi vmalle1is // invalidate I + D TLBs /* * Memory region attributes for LPAE: * -- cgit v0.10.2 From 62aceb8ff4b3f442575eb7e23629da36020dca77 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 22 Nov 2013 21:07:31 +0000 Subject: arm64: make default NR_CPUS 8 Rather than continue to add per platform defaults, make the default a likely common core count. 8 is also the default for x86. Signed-off-by: Rob Herring Cc: Will Deacon Signed-off-by: Catalin Marinas diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 88c8b6c1..6d4dd22 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -159,8 +159,7 @@ config NR_CPUS range 2 32 depends on SMP # These have to remain sorted largest to smallest - default "8" if ARCH_XGENE - default "4" + default "8" config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" -- cgit v0.10.2 From 85cc00eaa81dfa0f5bf8076c48f3ee2c2c4a77ba Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Mon, 18 Nov 2013 18:56:42 +0000 Subject: arm64: kernel: add code to set cpu boot mode to secondary_entry shim The refactoring of el2_setup split code setting up EL2 and detecting the CPU boot mode in separate chunks. This allows the code that sets up EL2 to run in an endian independent way - ie before the endianess is set up in the respective sctlr registers. This patch brings secondary_entry up-to-date so that CPUs entering the kernel through this code path set-up EL2 and the cpu boot mode properly. Signed-off-by: Lorenzo Pieralisi Acked-by: Mark Rutland Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 7009387..c68cca5 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -282,8 +282,9 @@ ENDPROC(secondary_holding_pen) * be used where CPUs are brought online dynamically by the kernel. */ ENTRY(secondary_entry) - bl __calc_phys_offset // x2=phys offset bl el2_setup // Drop to EL1 + bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET + bl set_cpu_boot_mode_flag b secondary_startup ENDPROC(secondary_entry) -- cgit v0.10.2 From 2f7dc6027522499582a520807cb9ffda589de47e Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 5 Dec 2013 16:56:50 +0000 Subject: arm64: Fix memory shareability attribute for ioremap_wc/cache Write-combine and cacheable mappings use Normal memory on arm64. On SMP systems, the pte needs the shareability bit which is set in pgprot_default. Use this for defining PROT_DEFAULT used by ioremap_wc and ioremap_cache (Device memory is shareable by default, does not need additional attributes). Signed-off-by: Catalin Marinas diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 4cc813e..5727697 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -229,7 +229,7 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot extern void __iounmap(volatile void __iomem *addr); extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); -#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY) +#define PROT_DEFAULT (pgprot_default | PTE_DIRTY) #define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) #define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC)) #define PROT_NORMAL (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) -- cgit v0.10.2 From db4ed53cfe9f5a00355891a631d47dfa3fd4541f Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Thu, 5 Dec 2013 12:04:51 +0000 Subject: arm64: mm: Fix PMD_SECT_PROT_NONE definition Modify the value of PMD_SECT_PROT_NONE to match that of PTE_NONE. This should have been in commit 3676f9ef5481 (Move PTE_PROT_NONE higher up). Signed-off-by: Steve Capper Cc: # 3.11+: 3676f9ef5481: arm64: Move PTE_PROT_NONE higher up Signed-off-by: Catalin Marinas diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index 755f861..b1d2e26 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -43,7 +43,7 @@ * Section */ #define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) -#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58) #define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */ #define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) -- cgit v0.10.2 From 374b105797c3d4f29c685f3be535c35f5689b30e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 6 Dec 2013 09:34:04 -0800 Subject: Linux 3.13-rc3 diff --git a/Makefile b/Makefile index 2c88e44..890392f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 13 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* -- cgit v0.10.2 From 5e863c561048252bb230d2f9daeed9fbe2705b41 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Dec 2013 14:20:16 -0800 Subject: ARM: OMAP2+: Fix overwriting hwmod data with data from device tree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have some device tree properties where the ti,hwmod have multiple values: am33xx.dtsi: ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; am4372.dtsi: ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; dra7.dtsi: ti,hwmods = "l3_main_1", "l3_main_2"; omap3.dtsi: ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; omap3.dtsi: ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; omap4.dtsi: ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; omap5.dtsi: ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; That's not correct way of doing things in this case because these are separate devices with their own address space, interrupts, SYSCONFIG registers and can set their PM states independently. So they should all be fixed up to be separate devices in the .dts files. We also have the related data removed for at least omap4 in commit 3b9b10151c68 (ARM: OMAP4: hwmod data: Clean up the data file), so that data is wrongly initialized as null data. So we need to fix two bugs: 1. We are only checking the first entry of the ti,hwmods property This means that we're only initializing the first hwmods entry instead of the ones listed in the ti,hwmods property. 2. We are only checking the child nodes, not the nodes themselves This means that anything listed at OCP level is currently just ignored and unitialized and at least the omap4 case, with the legacy data missing from the hwmod. Fix both of the issues by using an index to the ti,hwmods property and changing the hwmod lookup function to also check the current node for ti,hwmods property instead of just the children. While at it, let's also add some warnings for the bad data so it's easier to fix. Cc: "Benoît Cousson" Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e3f0eca..ee655da 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2326,38 +2326,80 @@ static int _shutdown(struct omap_hwmod *oh) return 0; } +static int of_dev_find_hwmod(struct device_node *np, + struct omap_hwmod *oh) +{ + int count, i, res; + const char *p; + + count = of_property_count_strings(np, "ti,hwmods"); + if (count < 1) + return -ENODEV; + + for (i = 0; i < count; i++) { + res = of_property_read_string_index(np, "ti,hwmods", + i, &p); + if (res) + continue; + if (!strcmp(p, oh->name)) { + pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n", + np->name, i, oh->name); + return i; + } + } + + return -ENODEV; +} + /** * of_dev_hwmod_lookup - look up needed hwmod from dt blob * @np: struct device_node * * @oh: struct omap_hwmod * + * @index: index of the entry found + * @found: struct device_node * found or NULL * * Parse the dt blob and find out needed hwmod. Recursive function is * implemented to take care hierarchical dt blob parsing. - * Return: The device node on success or NULL on failure. + * Return: Returns 0 on success, -ENODEV when not found. */ -static struct device_node *of_dev_hwmod_lookup(struct device_node *np, - struct omap_hwmod *oh) +static int of_dev_hwmod_lookup(struct device_node *np, + struct omap_hwmod *oh, + int *index, + struct device_node **found) { - struct device_node *np0 = NULL, *np1 = NULL; - const char *p; + struct device_node *np0 = NULL; + int res; + + res = of_dev_find_hwmod(np, oh); + if (res >= 0) { + *found = np; + *index = res; + return 0; + } for_each_child_of_node(np, np0) { - if (of_find_property(np0, "ti,hwmods", NULL)) { - p = of_get_property(np0, "ti,hwmods", NULL); - if (!strcmp(p, oh->name)) - return np0; - np1 = of_dev_hwmod_lookup(np0, oh); - if (np1) - return np1; + struct device_node *fc; + int i; + + res = of_dev_hwmod_lookup(np0, oh, &i, &fc); + if (res == 0) { + *found = fc; + *index = i; + return 0; } } - return NULL; + + *found = NULL; + *index = 0; + + return -ENODEV; } /** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address * @data: (unused, caller should pass NULL) + * @index: index of the reg entry iospace in device tree * @np: struct device_node * of the IP block's device node in the DT data * * Cache the virtual address used by the MPU to access this IP block's @@ -2368,7 +2410,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np, * -ENXIO on absent or invalid register target address space. */ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, - struct device_node *np) + int index, struct device_node *np) { struct omap_hwmod_addr_space *mem; void __iomem *va_start = NULL; @@ -2390,13 +2432,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, if (!np) return -ENXIO; - va_start = of_iomap(np, oh->mpu_rt_idx); + va_start = of_iomap(np, index + oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } if (!va_start) { - pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + if (mem) + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + else + pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n", + oh->name, index, np->full_name); return -ENXIO; } @@ -2422,17 +2468,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, */ static int __init _init(struct omap_hwmod *oh, void *data) { - int r; + int r, index; struct device_node *np = NULL; if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - if (of_have_populated_dt()) - np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + if (of_have_populated_dt()) { + struct device_node *bus; + + bus = of_find_node_by_name(NULL, "ocp"); + if (!bus) + return -ENODEV; + + r = of_dev_hwmod_lookup(bus, oh, &index, &np); + if (r) + pr_debug("omap_hwmod: %s missing dt data\n", oh->name); + else if (np && index) + pr_warn("omap_hwmod: %s using broken dt data from %s\n", + oh->name, np->name); + } if (oh->class->sysc) { - r = _init_mpu_rt_base(oh, NULL, np); + r = _init_mpu_rt_base(oh, NULL, index, np); if (r < 0) { WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", oh->name); -- cgit v0.10.2 From a01581857941c003591ab29719554830b363c575 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Dec 2013 14:20:16 -0800 Subject: ARM: dts: Fix missing entries for am3517 On am3517 there are some extra devices compared to omap3.dtsi that we currently have not defined. Let's fix that by adding am3517.dtsi file. Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi new file mode 100644 index 0000000..2fbe02f --- /dev/null +++ b/arch/arm/boot/dts/am3517.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + am35x_otg_hs: am35x_otg_hs@5c040000 { + compatible = "ti,omap3-musb"; + ti,hwmods = "am35x_otg_hs"; + status = "disabled"; + reg = <0x5c040000 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + + davinci_emac: ethernet@0x5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: ethernet@0x5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart4: serial@4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + }; +}; -- cgit v0.10.2 From caef4ee8fb35923d970afac202c027600800902e Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 6 Dec 2013 14:20:17 -0800 Subject: ARM: OMAP2+: Fix the machine entry for am3517 The am3517 is wrongly booting as omap3 which means that the am3517 specific devices like Ethernet won't work when booted with device tree. Now with the new devices defined in am3517.dtsi, let's use that instead of the omap3.dtsi, and add a separate machine entry for am3517 so am3517-evm can use it. Signed-off-by: Nishanth Menon [tony@atomide.com: updated comments and fixed build without omap3] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index e99dfaf..03fcbf0 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "am3517.dtsi" / { - model = "TI AM3517 EVM (AM3517/05)"; - compatible = "ti,am3517-evm", "ti,omap3"; + model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; + compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 19f1652..8d972ff1 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, MACHINE_END + +static const char *am3517_boards_compat[] __initdata = { + "ti,am3517", + NULL, +}; + +DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = am35xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = am3517_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX -- cgit v0.10.2 From f2e2c9d9b4087b74eb9e00d8dfac148354cb0b71 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Dec 2013 14:20:17 -0800 Subject: ARM: dts: Fix booting for secure omaps Commit 7ce93f3 (ARM: OMAP2+: Fix more missing data for omap3.dtsi file) fixed missing device tree data for omaps, but did not account for some of the hardware modules being inaccessible for secure omaps. This causes the following error on secure omaps: Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0c5048 SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc2+ #446 task: ce057b40 ti: ce058000 task.ti: ce058000 PC is at omap_aes_dma_stop+0x24/0x3c LR is at omap_aes_probe+0x1cc/0x584 psr: 60000113 sp : ce059e20 ip : ce0b4ee0 fp : 00000000 r10: c0573ae8 r9 : c0749508 r8 : 00000000 r7 : ce0b4e00 r6 : 00000000 r5 : ce0b4e10 r4 : ce274890 r3 : fa0c5048 r2 : 00000048 r1 : 0000002c r0 : ce274890 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xce058248) Stack: (0xce059e20 to 0xce05a000) 9e20: c0749508 0000a1ff 00000000 c016cd8c c06b5a06 ce2a45f0 ce2a4570 ce0b5fb0 9e40: 00000000 480c5000 480c504f c0abe4e4 00000200 00000000 00000000 00000000 9e60: ce0b4e10 ce0b4e10 c082da3c c082da3c c02b8c70 c077c610 c0749508 00000000 9e80: 00000000 c02b9e7c c02b9e64 ce0b4e10 00000000 c02b8b20 ce0b4e10 ce0b4e44 9ea0: c082da3c c02b8cd8 00000000 ce059eb8 c082da3c c02b7408 ce079edc ce0b1a34 9ec0: c082da3c c082da3c ce2a0280 00000000 c08158d8 c02b8358 c0663405 c0663405 9ee0: 00000073 c082da3c c079e4e8 c07ab3bc c0844340 c02b9334 00000000 00000006 9f00: c079e4e8 c0008920 c067f6bf c0ac7c6b 00000000 c0712e28 00000000 00000000 9f20: c0712e38 ce059f38 00000093 c0ac7c82 00000000 c0058994 00000000 c07130e8 9f40: c07127b8 00000093 00000006 00000006 00000001 00000006 00000006 c079e4e8 9f60: c07ab3bc c0844340 00000093 c0749508 c079e4f4 c0749c64 00000006 00000006 9f80: c0749508 00000000 00000000 c0517e2c 00000000 00000000 00000000 00000000 9fa0: 00000000 c0517e34 00000000 c000dfb8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff (omap_aes_probe+0x1cc/0x584) (platform_drv_probe+0x18/0x48) (driver_probe_device+0xb0/0x200) (__driver_attach+0x68/0x8c) (bus_for_each_dev+0x50/0x88) (bus_add_driver+0xcc/0x1c8) (driver_register+0x9c/0xe0) (do_one_initcall+0x98/0x140) (kernel_init_freeable+0x16c/0x23c) (kernel_init+0x8/0x100) (ret_from_fork+0x14/0x3c) Code: e1811002 e5932020 e590300c e0833002 (e593c000) Let's fix the issue by adding omap34xx-hs.dtsi and omap36xx-hs.dtsi and make n900, n9 and n950 to use them. This way we have the aes, sham and timer12 disabled for secure devices the same way legacy booting does based on the omap34xx_gp_hwmod_ocp_ifs and omap36xx_gp_hwmod_ocp_ifs arrays in omap_hwmod_3xxx_data.c. Reported-by: Sebastian Reichel Acked-By: Sebastian Reichel Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c2c306d..6fc85f9 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap34xx-hs.dtsi" / { model = "Nokia N900"; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 94eb77d..5c26c18 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx.dtsi" +#include "omap36xx-hs.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi new file mode 100644 index 0000000..1ff6264 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi new file mode 100644 index 0000000..2c7febb --- /dev/null +++ b/arch/arm/boot/dts/omap36xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap36xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; -- cgit v0.10.2 From c65ec135960e4555f65d8c9243f65b2fb88ac071 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Tue, 3 Dec 2013 11:56:52 +0100 Subject: powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled, emits 'no irq domain found' WARN() messages and breaks the boot process irq: no irq domain found for /soc@80000000 ! ------------[ cut here ]------------ WARNING: at drivers/of/platform.c:171 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g8a66234 #8 task: df823bb0 ti: df834000 task.ti: df834000 NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0 REGS: df835c50 TRAP: 0700 Tainted: G W (3.13.0-rc1-00001-g8a66234) MSR: 00029032 CR: 229a9d42 XER: 20000000 GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308 GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880 GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001 NIP [c02b5190] of_device_alloc+0xf4/0x1a0 LR [c02b5180] of_device_alloc+0xe4/0x1a0 Call Trace: [df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable) [df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8 [df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170 [df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170 [df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8 [df835e30] [c0437508] mpc512x_init+0x28/0x1c4 [df835e70] [c0435de8] ppc_init+0x4c/0x60 [df835e80] [c0003b28] do_one_initcall+0x150/0x1a4 [df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0 [df835f30] [c0004114] kernel_init+0x18/0x124 [df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55 7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098 ---[ end trace 2257f10e5a20cbdd ]--- ... irq: no irq domain found for /soc@80000000 ! fsl-diu-fb 80002100.display: could not get DIU IRQ fsl-diu-fb: probe of 80002100.display failed with error -22 irq: no irq domain found for /soc@80000000 ! mpc512x_dma 80014000.dma: Error mapping IRQ! mpc512x_dma: probe of 80014000.dma failed with error -22 ... irq: no irq domain found for /soc@80000000 ! fs_enet: probe of 80002800.ethernet failed with error -22 ... irq: no irq domain found for /soc@80000000 ! mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0 mpc5121-rtc: probe of 80000a00.rtc failed with error -22 ... Cc: Anatolij Gustschin Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index bd14c00..2d7cb04 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -77,7 +77,6 @@ compatible = "fsl,mpc5121-immr"; #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; ranges = <0x0 0x80000000 0x400000>; reg = <0x80000000 0x400000>; bus-frequency = <66000000>; /* 66 MHz ips bus */ -- cgit v0.10.2 From 4fc9bbf98fd66f879e628d8537ba7c240be2b58e Mon Sep 17 00:00:00 2001 From: Khalid Aziz Date: Wed, 27 Nov 2013 15:19:25 -0700 Subject: PCI: Disable Bus Master only on kexec reboot Add a flag to tell the PCI subsystem that kernel is shutting down in preparation to kexec a kernel. Add code in PCI subsystem to use this flag to clear Bus Master bit on PCI devices only in case of kexec reboot. This fixes a power-off problem on Acer Aspire V5-573G and likely other machines and avoids any other issues caused by clearing Bus Master bit on PCI devices in normal shutdown path. The problem was introduced by b566a22c2332 ("PCI: disable Bus Master on PCI device shutdown"). This patch is based on discussion at http://marc.info/?l=linux-pci&m=138425645204355&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861 Reported-by: Chang Liu Signed-off-by: Khalid Aziz Signed-off-by: Bjorn Helgaas Acked-by: Konstantin Khlebnikov Cc: stable@vger.kernel.org # v3.5+ diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 7edd5c3..25f0bc6 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "pci.h" struct pci_dynid { @@ -415,12 +416,17 @@ static void pci_device_shutdown(struct device *dev) pci_msi_shutdown(pci_dev); pci_msix_shutdown(pci_dev); +#ifdef CONFIG_KEXEC /* - * Turn off Bus Master bit on the device to tell it to not - * continue to do DMA. Don't touch devices in D3cold or unknown states. + * If this is a kexec reboot, turn off Bus Master bit on the + * device to tell it to not continue to do DMA. Don't touch + * devices in D3cold or unknown states. + * If it is not a kexec reboot, firmware will hit the PCI + * devices with big hammer and stop their DMA any way. */ - if (pci_dev->current_state <= PCI_D3hot) + if (kexec_in_progress && (pci_dev->current_state <= PCI_D3hot)) pci_clear_master(pci_dev); +#endif } #ifdef CONFIG_PM diff --git a/include/linux/kexec.h b/include/linux/kexec.h index d78d28a..5fd33dc 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -198,6 +198,9 @@ extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4]; extern size_t vmcoreinfo_size; extern size_t vmcoreinfo_max_size; +/* flag to track if kexec reboot is in progress */ +extern bool kexec_in_progress; + int __init parse_crashkernel(char *cmdline, unsigned long long system_ram, unsigned long long *crash_size, unsigned long long *crash_base); int parse_crashkernel_high(char *cmdline, unsigned long long system_ram, diff --git a/kernel/kexec.c b/kernel/kexec.c index 490afc0..d0d8fca 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -47,6 +47,9 @@ u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4]; size_t vmcoreinfo_size; size_t vmcoreinfo_max_size = sizeof(vmcoreinfo_data); +/* Flag to indicate we are going to kexec a new kernel */ +bool kexec_in_progress = false; + /* Location of the reserved area for the crash kernel */ struct resource crashk_res = { .name = "Crash kernel", @@ -1675,6 +1678,7 @@ int kernel_kexec(void) } else #endif { + kexec_in_progress = true; kernel_restart_prepare(NULL); printk(KERN_EMERG "Starting new kernel\n"); machine_shutdown(); -- cgit v0.10.2 From b4ef4ce09308955d1aa54a289c0162607b3aa16c Mon Sep 17 00:00:00 2001 From: Sergey Popovich Date: Fri, 6 Dec 2013 10:57:19 +0200 Subject: netfilter: xt_hashlimit: fix proc entry leak in netns destroy path In (32263dd1b netfilter: xt_hashlimit: fix namespace destroy path) the hashlimit_net_exit() function is always called right before hashlimit_mt_destroy() to release netns data. If you use xt_hashlimit with IPv4 and IPv6 together, this produces the following splat via netconsole in the netns destroy path: Pid: 9499, comm: kworker/u:0 Tainted: G WC O 3.2.0-5-netctl-amd64-core2 Call Trace: [] ? warn_slowpath_common+0x78/0x8c [] ? warn_slowpath_fmt+0x45/0x4a [] ? remove_proc_entry+0xd8/0x22e [] ? kfree+0x5b/0x6c [] ? hashlimit_net_exit+0x45/0x8d [xt_hashlimit] [] ? ops_exit_list+0x1c/0x44 [] ? cleanup_net+0xf1/0x180 [] ? should_resched+0x5/0x23 [] ? process_one_work+0x161/0x269 [] ? cwq_activate_delayed_work+0x3c/0x48 [] ? worker_thread+0xc2/0x145 [] ? manage_workers.isra.25+0x15b/0x15b [] ? kthread+0x76/0x7e [] ? kernel_thread_helper+0x4/0x10 [] ? kthread_worker_fn+0x139/0x139 [] ? gs_change+0x13/0x13 ---[ end trace d8c3cc0ad163ef79 ]--- ------------[ cut here ]------------ WARNING: at /usr/src/linux-3.2.52/debian/build/source_netctl/fs/proc/generic.c:849 remove_proc_entry+0x217/0x22e() Hardware name: remove_proc_entry: removing non-empty directory 'net/ip6t_hashlimit', leaking at least 'IN-REJECT' This is due to lack of removal net/ip6t_hashlimit/* entries in hashlimit_proc_net_exit(), since only IPv4 entries are deleted. Fix it by always removing the IPv4 and IPv6 entries and their parent directories in the netns destroy path. Signed-off-by: Sergey Popovich Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 9ff035c..a3910fc 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -325,21 +325,24 @@ static void htable_gc(unsigned long htlong) add_timer(&ht->timer); } -static void htable_destroy(struct xt_hashlimit_htable *hinfo) +static void htable_remove_proc_entry(struct xt_hashlimit_htable *hinfo) { struct hashlimit_net *hashlimit_net = hashlimit_pernet(hinfo->net); struct proc_dir_entry *parent; - del_timer_sync(&hinfo->timer); - if (hinfo->family == NFPROTO_IPV4) parent = hashlimit_net->ipt_hashlimit; else parent = hashlimit_net->ip6t_hashlimit; - if(parent != NULL) + if (parent != NULL) remove_proc_entry(hinfo->name, parent); +} +static void htable_destroy(struct xt_hashlimit_htable *hinfo) +{ + del_timer_sync(&hinfo->timer); + htable_remove_proc_entry(hinfo); htable_selective_cleanup(hinfo, select_all); kfree(hinfo->name); vfree(hinfo); @@ -883,21 +886,15 @@ static int __net_init hashlimit_proc_net_init(struct net *net) static void __net_exit hashlimit_proc_net_exit(struct net *net) { struct xt_hashlimit_htable *hinfo; - struct proc_dir_entry *pde; struct hashlimit_net *hashlimit_net = hashlimit_pernet(net); - /* recent_net_exit() is called before recent_mt_destroy(). Make sure - * that the parent xt_recent proc entry is is empty before trying to - * remove it. + /* hashlimit_net_exit() is called before hashlimit_mt_destroy(). + * Make sure that the parent ipt_hashlimit and ip6t_hashlimit proc + * entries is empty before trying to remove it. */ mutex_lock(&hashlimit_mutex); - pde = hashlimit_net->ipt_hashlimit; - if (pde == NULL) - pde = hashlimit_net->ip6t_hashlimit; - hlist_for_each_entry(hinfo, &hashlimit_net->htables, node) - remove_proc_entry(hinfo->name, pde); - + htable_remove_proc_entry(hinfo); hashlimit_net->ipt_hashlimit = NULL; hashlimit_net->ip6t_hashlimit = NULL; mutex_unlock(&hashlimit_mutex); -- cgit v0.10.2 From cf9dc09d0949f0b5953fb08caa10bba0dc7ee71f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 24 Nov 2013 20:39:10 +0100 Subject: netfilter: nf_tables: fix missing rules flushing per table This patch allows you to atomically remove all rules stored in a table via the NFT_MSG_DELRULE command. You only need to indicate the specific table and no chain to flush all rules stored in that table. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index dcddc49..f93b7d0 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1717,6 +1717,19 @@ nf_tables_delrule_one(struct nft_ctx *ctx, struct nft_rule *rule) return -ENOENT; } +static int nf_table_delrule_by_chain(struct nft_ctx *ctx) +{ + struct nft_rule *rule; + int err; + + list_for_each_entry(rule, &ctx->chain->rules, list) { + err = nf_tables_delrule_one(ctx, rule); + if (err < 0) + return err; + } + return 0; +} + static int nf_tables_delrule(struct sock *nlsk, struct sk_buff *skb, const struct nlmsghdr *nlh, const struct nlattr * const nla[]) @@ -1725,8 +1738,8 @@ static int nf_tables_delrule(struct sock *nlsk, struct sk_buff *skb, const struct nft_af_info *afi; struct net *net = sock_net(skb->sk); const struct nft_table *table; - struct nft_chain *chain; - struct nft_rule *rule, *tmp; + struct nft_chain *chain = NULL; + struct nft_rule *rule; int family = nfmsg->nfgen_family, err = 0; struct nft_ctx ctx; @@ -1738,22 +1751,29 @@ static int nf_tables_delrule(struct sock *nlsk, struct sk_buff *skb, if (IS_ERR(table)) return PTR_ERR(table); - chain = nf_tables_chain_lookup(table, nla[NFTA_RULE_CHAIN]); - if (IS_ERR(chain)) - return PTR_ERR(chain); + if (nla[NFTA_RULE_CHAIN]) { + chain = nf_tables_chain_lookup(table, nla[NFTA_RULE_CHAIN]); + if (IS_ERR(chain)) + return PTR_ERR(chain); + } nft_ctx_init(&ctx, skb, nlh, afi, table, chain, nla); - if (nla[NFTA_RULE_HANDLE]) { - rule = nf_tables_rule_lookup(chain, nla[NFTA_RULE_HANDLE]); - if (IS_ERR(rule)) - return PTR_ERR(rule); + if (chain) { + if (nla[NFTA_RULE_HANDLE]) { + rule = nf_tables_rule_lookup(chain, + nla[NFTA_RULE_HANDLE]); + if (IS_ERR(rule)) + return PTR_ERR(rule); - err = nf_tables_delrule_one(&ctx, rule); - } else { - /* Remove all rules in this chain */ - list_for_each_entry_safe(rule, tmp, &chain->rules, list) { err = nf_tables_delrule_one(&ctx, rule); + } else { + err = nf_table_delrule_by_chain(&ctx); + } + } else { + list_for_each_entry(chain, &table->chains, list) { + ctx.chain = chain; + err = nf_table_delrule_by_chain(&ctx); if (err < 0) break; } -- cgit v0.10.2 From 12205a4b79bef56ef618a4b7caa840c5c971cff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 8 Dec 2013 01:04:17 +0100 Subject: Revert "cpufreq: suspend governors on system suspend/hibernate" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 5a87182aa21d (cpufreq: suspend governors on system suspend/hibernate) causes hibernation problems to happen on Bjørn Mork's and Paul Bolle's systems, so revert it. Fixes: 5a87182aa21d (cpufreq: suspend governors on system suspend/hibernate) Reported-by: Bjørn Mork Reported-by: Paul Bolle Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e3219df..1b41fca 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include @@ -541,7 +540,6 @@ static void dpm_resume_noirq(pm_message_t state) dpm_show_time(starttime, state, "noirq"); resume_device_irqs(); cpuidle_resume(); - cpufreq_resume(); } /** @@ -957,7 +955,6 @@ static int dpm_suspend_noirq(pm_message_t state) ktime_t starttime = ktime_get(); int error = 0; - cpufreq_suspend(); cpuidle_pause(); suspend_device_irqs(); mutex_lock(&dpm_list_mtx); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 81e9d44..b7c3b877d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -48,9 +47,6 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif -/* Flag to suspend/resume CPUFreq governors */ -static bool cpufreq_suspended; - static inline bool has_target(void) { return cpufreq_driver->target_index || cpufreq_driver->target; @@ -1466,41 +1462,6 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; -void cpufreq_suspend(void) -{ - struct cpufreq_policy *policy; - - if (!has_target()) - return; - - pr_debug("%s: Suspending Governors\n", __func__); - - list_for_each_entry(policy, &cpufreq_policy_list, policy_list) - if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP)) - pr_err("%s: Failed to stop governor for policy: %p\n", - __func__, policy); - - cpufreq_suspended = true; -} - -void cpufreq_resume(void) -{ - struct cpufreq_policy *policy; - - if (!has_target()) - return; - - pr_debug("%s: Resuming Governors\n", __func__); - - cpufreq_suspended = false; - - list_for_each_entry(policy, &cpufreq_policy_list, policy_list) - if (__cpufreq_governor(policy, CPUFREQ_GOV_START) - || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS)) - pr_err("%s: Failed to start governor for policy: %p\n", - __func__, policy); -} - /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1803,10 +1764,6 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, struct cpufreq_governor *gov = NULL; #endif - /* Don't start any governor operations if we are entering suspend */ - if (cpufreq_suspended) - return 0; - if (policy->governor->max_transition_latency && policy->cpuinfo.transition_latency > policy->governor->max_transition_latency) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index ee5fe9d..dc196bb 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -280,14 +280,6 @@ cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy) policy->cpuinfo.max_freq); } -#ifdef CONFIG_CPU_FREQ -void cpufreq_suspend(void); -void cpufreq_resume(void); -#else -static inline void cpufreq_suspend(void) {} -static inline void cpufreq_resume(void) {} -#endif - /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ -- cgit v0.10.2 From d4faadd5d5b368a7051fef374ee933ec3606713b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 8 Dec 2013 01:23:58 +0100 Subject: Revert "cpufreq: fix garbage kobjects on errors during suspend/resume" Commit 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during suspend/resume) breaks suspend/resume on Martin Ziegler's system (hard lockup during resume), so revert it. Fixes: 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during suspend/resume) References: https://bugzilla.kernel.org/show_bug.cgi?id=66751 Reported-by: Martin Ziegler Cc: 3.12+ # 3.12+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b7c3b877d..02d534d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2076,6 +2076,9 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb, dev = get_cpu_device(cpu); if (dev) { + if (action & CPU_TASKS_FROZEN) + frozen = true; + switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: __cpufreq_add_dev(dev, NULL, frozen); -- cgit v0.10.2 From 11e6a09fba446ce799a9de51d2d99586024bbdaa Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Sun, 8 Dec 2013 23:39:04 -0800 Subject: drm/vmwgfx: Add max surface memory param Userspace uses this to workaround overcommit issues by flushing the command stream early. Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index a51f48e..45d5b5a 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -68,6 +68,9 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, SVGA_FIFO_3D_HWVERSION)); break; } + case DRM_VMW_PARAM_MAX_SURF_MEMORY: + param->value = dev_priv->memory_size; + break; default: DRM_ERROR("Illegal vmwgfx get param request: %d\n", param->param); diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index bcb0912..f854ca4 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -75,6 +75,7 @@ #define DRM_VMW_PARAM_FIFO_CAPS 4 #define DRM_VMW_PARAM_MAX_FB_SIZE 5 #define DRM_VMW_PARAM_FIFO_HW_VERSION 6 +#define DRM_VMW_PARAM_MAX_SURF_MEMORY 7 /** * struct drm_vmw_getparam_arg -- cgit v0.10.2 From b483a4a5a7117ac7d21397770d5adb458c157dbe Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 3 Dec 2013 16:25:46 +0200 Subject: ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this, the USB devices are sometimes not detected on OMAP4 Panda with u-boot v2013.10. Unlike what the comment states, errata i660 does not state that we can't RESET the USB host module. Instead it states that RESET is the only way to recover from a deadlock situation. RESET ensures that the module is in a known good state irrespective of what bootloader does with the module, so it must be done at boot. Reported-by: Tomi Valkeinen Signed-off-by: Roger Quadros Tested-by: Tomi Valkeinen # Panda, BeagleXM Acked-by: Benoît Cousson Fixes: af88fa9aa77c ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4") Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1e5b12c..3318cae9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { .sysc_offs = 0x0010, .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), + SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), @@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 9e08d69..e297d62 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), @@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "l3init_60m_fclk", .prcm = { .omap4 = { -- cgit v0.10.2 From 389a5390583a18e45bc4abd4439291abec5e7a63 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Thu, 5 Dec 2013 13:09:53 -0600 Subject: crypto: scatterwalk - Use sg_chain_ptr on chain entries Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is enabled. Use sg_chain_ptr instead of sg_page on a chain entry. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 64ebede..6a626a5 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -44,7 +44,7 @@ static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) if (sg_is_last(sg)) return NULL; - return (++sg)->length ? sg : (void *)sg_page(sg); + return (++sg)->length ? sg : sg_chain_ptr(sg); } static inline void scatterwalk_crypto_chain(struct scatterlist *head, -- cgit v0.10.2 From d81cae806af428898f63391b5d7cd7ba0d87025d Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 5 Dec 2013 16:34:25 -0800 Subject: HID: hid-sensor-hub: fix duplicate sysfs entry error Fix kernel warning and failure to register sensor hub devices with MFD. Now many devices has in-built sensor hubs. So by default this HID hub, is properly parsed and register individual sensors as platform device using MFD framework. But if a second sensor hub is attached via USB, which has same sensors, it will result in kernel warning and failure to register MFD cell as the platform device sysfs file name will be same as created by in-built sensor hubs. This patch sets MFD cell id to PLATFORM_DEVID_AUTO. In this way there will never be duplicate sysfs file names. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index a184e19..8af2d90 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -573,6 +573,8 @@ static int sensor_hub_probe(struct hid_device *hdev, goto err_free_names; } sd->hid_sensor_hub_client_devs[ + sd->hid_sensor_client_cnt].id = PLATFORM_DEVID_AUTO; + sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].name = name; sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].platform_data = -- cgit v0.10.2 From 812c083ec4ae5182ab034c0ec55dbd5bb937c6f7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 28 Oct 2013 09:16:05 -0300 Subject: [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark.c:275: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Geert Uytterhoeven Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index 3db8a8c..050b3bb 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -271,8 +271,7 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } -#ifdef CONFIG_PM -static void shark_resume_leds(struct shark_device *shark) +static inline void shark_resume_leds(struct shark_device *shark) { if (test_bit(BLUE_IS_PULSE, &shark->brightness_new)) set_bit(BLUE_PULSE_LED, &shark->brightness_new); @@ -281,7 +280,6 @@ static void shark_resume_leds(struct shark_device *shark) set_bit(RED_LED, &shark->brightness_new); schedule_work(&shark->led_work); } -#endif #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { -- cgit v0.10.2 From c7223f8f66b685f325879a88a6c955ebf46a8a36 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 10:48:29 -0300 Subject: [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This mirrors the patch to the radio-shark driver by Geert Uytterhoeven. If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark2.c:240: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index d86d90d..8654e0d 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -237,8 +237,7 @@ static void shark_unregister_leds(struct shark_device *shark) cancel_work_sync(&shark->led_work); } -#ifdef CONFIG_PM -static void shark_resume_leds(struct shark_device *shark) +static inline void shark_resume_leds(struct shark_device *shark) { int i; @@ -247,7 +246,6 @@ static void shark_resume_leds(struct shark_device *shark) schedule_work(&shark->led_work); } -#endif #else static int shark_register_leds(struct shark_device *shark, struct device *dev) { -- cgit v0.10.2 From c1b96a236e94d49d9396d0bbceb5524519c5c66e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 05:11:35 -0300 Subject: [media] videobuf2: Add support for file access mode flags for DMABUF exporting Currently it is not possible for userspace to map a DMABUF exported buffer with write permissions. This patch allows to also pass O_RDONLY/O_RDWR when exporting the buffer, so that userspace may map it with write permissions. Signed-off-by: Philipp Zabel Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml index e287c8f..4165e7b 100644 --- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml @@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active format. For the single-planar API, applications must set plane to zero. Additional flags may be posted in the flags field. Refer to a manual for open() for details. -Currently only O_CLOEXEC is supported. All other fields must be set to zero. +Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All +other fields must be set to zero. In the case of multi-planar API, every plane is exported separately using multiple VIDIOC_EXPBUF calls. @@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. __u32 flags Flags for the newly created file, currently only -O_CLOEXEC is supported, refer to the manual of open() for more -details. +O_CLOEXEC , O_RDONLY, O_WRONLY +, and O_RDWR are supported, refer to the manual +of open() for more details. __s32 diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index b19b306..57ba131 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1824,8 +1824,8 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) return -EINVAL; } - if (eb->flags & ~O_CLOEXEC) { - dprintk(1, "Queue does support only O_CLOEXEC flag\n"); + if (eb->flags & ~(O_CLOEXEC | O_ACCMODE)) { + dprintk(1, "Queue does support only O_CLOEXEC and access mode flags\n"); return -EINVAL; } @@ -1848,14 +1848,14 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) vb_plane = &vb->planes[eb->plane]; - dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv); + dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv, eb->flags & O_ACCMODE); if (IS_ERR_OR_NULL(dbuf)) { dprintk(1, "Failed to export buffer %d, plane %d\n", eb->index, eb->plane); return -EINVAL; } - ret = dma_buf_fd(dbuf, eb->flags); + ret = dma_buf_fd(dbuf, eb->flags & ~O_ACCMODE); if (ret < 0) { dprintk(3, "buffer %d, plane %d failed to export (%d)\n", eb->index, eb->plane, ret); diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index 646f08f..33d3871d 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -393,7 +393,7 @@ static struct sg_table *vb2_dc_get_base_sgt(struct vb2_dc_buf *buf) return sgt; } -static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) +static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) { struct vb2_dc_buf *buf = buf_priv; struct dma_buf *dbuf; @@ -404,7 +404,7 @@ static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) if (WARN_ON(!buf->sgt_base)) return NULL; - dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, 0); + dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, flags); if (IS_ERR(dbuf)) return NULL; diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index bd8218b..941055e 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -83,7 +83,7 @@ struct vb2_fileio_data; struct vb2_mem_ops { void *(*alloc)(void *alloc_ctx, unsigned long size, gfp_t gfp_flags); void (*put)(void *buf_priv); - struct dma_buf *(*get_dmabuf)(void *buf_priv); + struct dma_buf *(*get_dmabuf)(void *buf_priv, unsigned long flags); void *(*get_userptr)(void *alloc_ctx, unsigned long vaddr, unsigned long size, int write); -- cgit v0.10.2 From f58c91ce82cbb55a48fbc1a0cb7c84c0d0a4e1bd Mon Sep 17 00:00:00 2001 From: Jonathan McCrohan Date: Sun, 20 Oct 2013 21:34:01 -0300 Subject: [media] media_tree: Fix spelling errors Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h index d0799e3..9c9063c 100644 --- a/drivers/media/common/siano/smscoreapi.h +++ b/drivers/media/common/siano/smscoreapi.h @@ -955,7 +955,7 @@ struct sms_rx_stats { u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ s32 SNR; /* dB */ u32 ber; /* Post Viterbi ber [1E-5] */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ u32 ber_bit_count; /* Total number of SYNC bits. */ u32 ts_per; /* Transport stream PER, 0xFFFFFFFF indicate N/A */ @@ -981,7 +981,7 @@ struct sms_rx_stats_ex { u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ s32 SNR; /* dB */ u32 ber; /* Post Viterbi ber [1E-5] */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ u32 ber_bit_count; /* Total number of SYNC bits. */ u32 ts_per; /* Transport stream PER, 0xFFFFFFFF indicate N/A */ diff --git a/drivers/media/common/siano/smsdvb.h b/drivers/media/common/siano/smsdvb.h index 92c413b..ae36d0a 100644 --- a/drivers/media/common/siano/smsdvb.h +++ b/drivers/media/common/siano/smsdvb.h @@ -95,7 +95,7 @@ struct RECEPTION_STATISTICS_PER_SLICES_S { u32 is_demod_locked; /* 0 - not locked, 1 - locked */ u32 ber_bit_count; /* Total number of SYNC bits. */ - u32 ber_error_count; /* Number of erronous SYNC bits. */ + u32 ber_error_count; /* Number of erroneous SYNC bits. */ s32 MRC_SNR; /* dB */ s32 mrc_in_band_pwr; /* In band power in dBM */ diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index eeb8d7f..6c7ff0c 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -435,7 +435,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) dprintk_tscheck("TEI detected. " "PID=0x%x data1=0x%x\n", pid, buf[1]); - /* data in this packet cant be trusted - drop it unless + /* data in this packet can't be trusted - drop it unless * module option dvb_demux_feed_err_pkts is set */ if (!dvb_demux_feed_err_pkts) return; diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c index 9053614..6dbbee4 100644 --- a/drivers/media/dvb-frontends/dib8000.c +++ b/drivers/media/dvb-frontends/dib8000.c @@ -3048,7 +3048,7 @@ static int dib8000_tune(struct dvb_frontend *fe) dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */ - /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this lenght to lock */ + /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */ *timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON); *tune_state = CT_DEMOD_STEP_5; break; @@ -3115,7 +3115,7 @@ static int dib8000_tune(struct dvb_frontend *fe) case CT_DEMOD_STEP_9: /* 39 */ if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */ - /* defines timeout for mpeg lock depending on interleaver lenght of longest layer */ + /* defines timeout for mpeg lock depending on interleaver length of longest layer */ for (i = 0; i < 3; i++) { if (c->layer[i].interleaving >= deeper_interleaver) { dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving); diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c index d416c15..bf29a3f 100644 --- a/drivers/media/dvb-frontends/drxk_hard.c +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable) goto error; if (state->m_enable_parallel == true) { - /* paralel -> enable MD1 to MD7 */ + /* parallel -> enable MD1 to MD7 */ status = write16(state, SIO_PDR_MD1_CFG__A, sio_pdr_mdx_cfg); if (status < 0) @@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state) dprintk(1, "\n"); - /* Gracefull shutdown (byte boundaries) */ + /* Graceful shutdown (byte boundaries) */ status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); if (status < 0) goto error; @@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state, fec_oc_dto_burst_len = 204; } - /* Check serial or parrallel output */ + /* Check serial or parallel output */ fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); if (state->m_enable_parallel == false) { /* MPEG data output is serial -> set ipr_mode[0] */ @@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state) goto error; if (count == 1) { - /* Try sampling on a diffrent edge */ + /* Try sampling on a different edge */ u16 clk_neg = 0; status = read16(state, IQM_AF_CLKNEG__A, &clk_neg); @@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state, if (status < 0) goto error; - /* Retreive results parameters from SC */ + /* Retrieve results parameters from SC */ switch (cmd) { /* All commands yielding 5 results */ /* All commands yielding 4 results */ @@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, break; } #if 0 - /* No hierachical channels support in BDA */ + /* No hierarchical channels support in BDA */ /* Priority (only for hierarchical channels) */ switch (channel->priority) { case DRX_PRIORITY_LOW: @@ -4081,7 +4081,7 @@ error: /*============================================================================*/ /** -* \brief Retreive lock status . +* \brief Retrieve lock status . * \param demod Pointer to demodulator instance. * \param lockStat Pointer to lock status structure. * \return DRXStatus_t. @@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state) goto error; /* Stamp driver version number in SCU data RAM in BCD code - Done to enable field application engineers to retreive drxdriver version + Done to enable field application engineers to retrieve drxdriver version via I2C from SCU RAM. Not using SCU command interface for SCU register access since no microcode may be present. @@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe) fe->ops.tuner_ops.get_if_frequency(fe, &IF); start(state, 0, IF); - /* After set_frontend, stats aren't avaliable */ + /* After set_frontend, stats aren't available */ p->strength.stat[0].scale = FE_SCALE_RELATIVE; p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; diff --git a/drivers/media/i2c/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h index 4a5b7d2..b253d40 100644 --- a/drivers/media/i2c/adv7183_regs.h +++ b/drivers/media/i2c/adv7183_regs.h @@ -52,9 +52,9 @@ #define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ #define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ #define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ -#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ -#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ -#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync position control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync position control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync position control 3 */ #define ADV7183_POLARITY 0x37 /* Polarity */ #define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ #define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index fbfdd2f..a324106b 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -877,7 +877,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd, break; case ADV7604_MODE_HDMI: /* set default prim_mode/vid_std for HDMI - accoring to [REF_03, c. 4.2] */ + according to [REF_03, c. 4.2] */ io_write(sd, 0x00, 0x02); /* video std */ io_write(sd, 0x01, 0x06); /* prim mode */ break; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 22f729d..b154f36 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -1013,7 +1013,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd, break; case ADV7842_MODE_HDMI: /* set default prim_mode/vid_std for HDMI - accoring to [REF_03, c. 4.2] */ + according to [REF_03, c. 4.2] */ io_write(sd, 0x00, 0x02); /* video std */ io_write(sd, 0x01, 0x06); /* prim mode */ break; diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index 82bf567..99ee456 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -394,7 +394,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (!rc) { /* - * If platform_data doesn't specify rc_dev, initilize it + * If platform_data doesn't specify rc_dev, initialize it * internally */ rc = rc_allocate_device(); diff --git a/drivers/media/i2c/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c index f34429e..a60931e 100644 --- a/drivers/media/i2c/m5mols/m5mols_controls.c +++ b/drivers/media/i2c/m5mols/m5mols_controls.c @@ -544,7 +544,7 @@ int m5mols_init_controls(struct v4l2_subdev *sd) u16 zoom_step; int ret; - /* Determine the firmware dependant control range and step values */ + /* Determine the firmware dependent control range and step values */ ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 6fec938..e7f555c 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1460,7 +1460,7 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd) mutex_unlock(&state->lock); v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n", - __func__, ret ? "failed" : "succeded", ret); + __func__, ret ? "failed" : "succeeded", ret); return ret; } diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h index 9d2c086..9dfa516 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3.h +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h @@ -393,7 +393,7 @@ struct s5c73m3 { /* External master clock frequency */ u32 mclk_frequency; - /* Video bus type - MIPI-CSI2/paralell */ + /* Video bus type - MIPI-CSI2/parallel */ enum v4l2_mbus_type bus_type; const struct s5c73m3_frame_size *sensor_pix_size[2]; diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index 637d026..afdbcb0 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -1699,7 +1699,7 @@ static void saa711x_write_platform_data(struct saa711x_state *state, * the analog demod. * If the tuner is not found, it returns -ENODEV. * If auto-detection is disabled and the tuner doesn't match what it was - * requred, it returns -EINVAL and fills 'name'. + * required, it returns -EINVAL and fills 'name'. * If the chip is found, it returns the chip ID and fills 'name'. */ static int saa711x_detect_chip(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c index 0a5c5d4..d2daa6a 100644 --- a/drivers/media/i2c/soc_camera/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -642,7 +642,7 @@ static const struct ov5642_datafmt static int reg_read(struct i2c_client *client, u16 reg, u8 *val) { int ret; - /* We have 16-bit i2c addresses - care for endianess */ + /* We have 16-bit i2c addresses - care for endianness */ unsigned char data[2] = { reg >> 8, reg & 0xff }; ret = i2c_master_send(client, data, 2); diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h index 2767c64..57f4688 100644 --- a/drivers/media/pci/cx18/cx18-driver.h +++ b/drivers/media/pci/cx18/cx18-driver.h @@ -262,7 +262,7 @@ struct cx18_options { }; /* per-mdl bit flags */ -#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */ +#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianness swapped */ /* per-stream, s_flags */ #define CX18_F_S_CLAIMED 3 /* this stream is claimed */ diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c index e3fc2c7..95666ee 100644 --- a/drivers/media/pci/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -427,7 +427,7 @@ int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) cx_write(MC417_RWD, regval); /* Transition RD to effect read transaction across bus. - * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? + * Transition 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its * input only...) */ diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c index 8164d74..655d6854 100644 --- a/drivers/media/pci/pluto2/pluto2.c +++ b/drivers/media/pci/pluto2/pluto2.c @@ -401,7 +401,7 @@ static int pluto_hw_init(struct pluto *pluto) /* set automatic LED control by FPGA */ pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); - /* set data endianess */ + /* set data endianness */ #ifdef __LITTLE_ENDIAN pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); #else diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index bd72fb9..61f3dbc 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -1434,7 +1434,7 @@ static void coda_buf_queue(struct vb2_buffer *vb) if (q_data->fourcc == V4L2_PIX_FMT_H264 && vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* - * For backwards compatiblity, queuing an empty buffer marks + * For backwards compatibility, queuing an empty buffer marks * the stream end */ if (vb2_get_plane_payload(vb, 0) == 0) diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c index 3d66d88..f791569 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.c +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -1039,7 +1039,7 @@ static int fimc_runtime_resume(struct device *dev) dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state); - /* Enable clocks and perform basic initalization */ + /* Enable clocks and perform basic initialization */ clk_enable(fimc->clock[CLK_GATE]); fimc_hw_reset(fimc); diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 7a4ee4c..c1bce17 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -759,7 +759,7 @@ static int fimc_md_register_platform_entity(struct fimc_md *fmd, goto dev_unlock; drvdata = dev_get_drvdata(dev); - /* Some subdev didn't probe succesfully id drvdata is NULL */ + /* Some subdev didn't probe successfully id drvdata is NULL */ if (drvdata) { switch (plat_entity) { case IDX_FIMC: diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 1c36080..561bce8 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1673,7 +1673,7 @@ void omap3isp_print_status(struct isp_device *isp) * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in * resume(), and the the pipelines are restarted in complete(). * - * TODO: PM dependencies between the ISP and sensors are not modeled explicitly + * TODO: PM dependencies between the ISP and sensors are not modelled explicitly * yet. */ static int isp_pm_prepare(struct device *dev) diff --git a/drivers/media/platform/s5p-mfc/regs-mfc.h b/drivers/media/platform/s5p-mfc/regs-mfc.h index 9319e93..6ccc3f8 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc.h @@ -382,7 +382,7 @@ #define S5P_FIMV_R2H_CMD_EDFU_INIT_RET 16 #define S5P_FIMV_R2H_CMD_ERR_RET 32 -/* Dummy definition for MFCv6 compatibilty */ +/* Dummy definition for MFCv6 compatibility */ #define S5P_FIMV_CODEC_H264_MVC_DEC -1 #define S5P_FIMV_R2H_CMD_FIELD_DONE_RET -1 #define S5P_FIMV_MFC_RESET -1 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 5f2c4ad..e46067a 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -239,7 +239,7 @@ static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx) frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev); /* Copy timestamp / timecode from decoded src to dst and set - appropraite flags */ + appropriate flags */ src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); list_for_each_entry(dst_buf, &ctx->dst_queue, list) { if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dec_y_addr) { @@ -428,7 +428,7 @@ static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, case MFCINST_FINISHING: case MFCINST_FINISHED: case MFCINST_RUNNING: - /* It is higly probable that an error occured + /* It is highly probable that an error occurred * while decoding a frame */ clear_work_bit(ctx); ctx->state = MFCINST_ERROR; @@ -611,7 +611,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err); switch (reason) { case S5P_MFC_R2H_CMD_ERR_RET: - /* An error has occured */ + /* An error has occurred */ if (ctx->state == MFCINST_RUNNING && s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >= dev->warn_start) @@ -840,7 +840,7 @@ static int s5p_mfc_open(struct file *file) mutex_unlock(&dev->mfc_mutex); mfc_debug_leave(); return ret; - /* Deinit when failure occured */ + /* Deinit when failure occurred */ err_queue_init: if (dev->num_inst == 1) s5p_mfc_deinit_hw(dev); @@ -881,14 +881,14 @@ static int s5p_mfc_release(struct file *file) /* Mark context as idle */ clear_work_bit_irqsave(ctx); /* If instance was initialised then - * return instance and free reosurces */ + * return instance and free resources */ if (ctx->inst_no != MFC_NO_INSTANCE_SET) { mfc_debug(2, "Has to free instance\n"); ctx->state = MFCINST_RETURN_INST; set_work_bit_irqsave(ctx); s5p_mfc_clean_ctx_int_flags(ctx); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); - /* Wait until instance is returned or timeout occured */ + /* Wait until instance is returned or timeout occurred */ if (s5p_mfc_wait_for_done_ctx (ctx, S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0)) { s5p_mfc_clock_off(); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index 7cab684..2475a3c 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -69,7 +69,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) } else { /* In this case bank2 can point to the same address as bank1. - * Firmware will always occupy the beggining of this area so it is + * Firmware will always occupy the beginning of this area so it is * impossible having a video frame buffer with zero address. */ dev->bank2 = dev->bank1; } diff --git a/drivers/media/platform/s5p-tv/mixer.h b/drivers/media/platform/s5p-tv/mixer.h index 04e6490..fb2acc5 100644 --- a/drivers/media/platform/s5p-tv/mixer.h +++ b/drivers/media/platform/s5p-tv/mixer.h @@ -65,7 +65,7 @@ struct mxr_format { int num_subframes; /** specifies to which subframe belong given plane */ int plane2subframe[MXR_MAX_PLANES]; - /** internal code, driver dependant */ + /** internal code, driver dependent */ unsigned long cookie; }; diff --git a/drivers/media/platform/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c index 641b1f0..81b97db 100644 --- a/drivers/media/platform/s5p-tv/mixer_video.c +++ b/drivers/media/platform/s5p-tv/mixer_video.c @@ -528,7 +528,7 @@ static int mxr_s_dv_timings(struct file *file, void *fh, mutex_lock(&mdev->mutex); /* timings change cannot be done while there is an entity - * dependant on output configuration + * dependent on output configuration */ if (mdev->n_output > 0) { mutex_unlock(&mdev->mutex); @@ -585,7 +585,7 @@ static int mxr_s_std(struct file *file, void *fh, v4l2_std_id norm) mutex_lock(&mdev->mutex); /* standard change cannot be done while there is an entity - * dependant on output configuration + * dependent on output configuration */ if (mdev->n_output > 0) { mutex_unlock(&mdev->mutex); diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index 6769193..74ce8b6 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1495,7 +1495,7 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd) if (ctrlclock & LCLK_EN) CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock); - /* select bus endianess */ + /* select bus endianness */ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); fmt = xlate->host_fmt; diff --git a/drivers/media/platform/vivi.c b/drivers/media/platform/vivi.c index 1d3f119..2d4e73b 100644 --- a/drivers/media/platform/vivi.c +++ b/drivers/media/platform/vivi.c @@ -1108,7 +1108,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -/* timeperframe is arbitrary and continous */ +/* timeperframe is arbitrary and continuous */ static int vidioc_enum_frameintervals(struct file *file, void *priv, struct v4l2_frmivalenum *fival) { @@ -1125,7 +1125,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv, fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; - /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ + /* fill in stepwise (step=1.0 is required by V4L2 spec) */ fival->stepwise.min = tpf_min; fival->stepwise.max = tpf_max; fival->stepwise.step = (struct v4l2_fract) {1, 1}; diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index 1c9e771..d16bf0f 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -323,7 +323,7 @@ static void vsp1_clocks_disable(struct vsp1_device *vsp1) * Increment the VSP1 reference count and initialize the device if the first * reference is taken. * - * Return a pointer to the VSP1 device or NULL if an error occured. + * Return a pointer to the VSP1 device or NULL if an error occurred. */ struct vsp1_device *vsp1_device_get(struct vsp1_device *vsp1) { diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c index 9c9084c..2fd9009 100644 --- a/drivers/media/radio/radio-si476x.c +++ b/drivers/media/radio/radio-si476x.c @@ -268,8 +268,8 @@ struct si476x_radio; * * @tune_freq: Tune chip to a specific frequency * @seek_start: Star station seeking - * @rsq_status: Get Recieved Signal Quality(RSQ) status - * @rds_blckcnt: Get recived RDS blocks count + * @rsq_status: Get Received Signal Quality(RSQ) status + * @rds_blckcnt: Get received RDS blocks count * @phase_diversity: Change phase diversity mode of the tuner * @phase_div_status: Get phase diversity mode status * @acf_status: Get the status of Automatically Controlled diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 72e3fa6..f329485 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1370,7 +1370,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf) * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates * 0x688301b7 and the right one 0x688481b7. All other keys generate * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with - * reversed endianess. Extract direction from buffer, rotate endianess, + * reversed endianness. Extract direction from buffer, rotate endianness, * adjust sign and feed the values into stabilize(). The resulting codes * will be 0x01008000, 0x01007F00, which match the newer devices. */ diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 094484f..a5d4f88 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -118,7 +118,7 @@ static int debug; #define RR3_IR_IO_LENGTH_FUZZ 0x04 /* Timeout for end of signal detection */ #define RR3_IR_IO_SIG_TIMEOUT 0x05 -/* Minumum value for pause recognition. */ +/* Minimum value for pause recognition. */ #define RR3_IR_IO_MIN_PAUSE 0x06 /* Clock freq. of EZ-USB chip */ diff --git a/drivers/media/tuners/mt2063.c b/drivers/media/tuners/mt2063.c index 2e1a02e..20cca40 100644 --- a/drivers/media/tuners/mt2063.c +++ b/drivers/media/tuners/mt2063.c @@ -1195,7 +1195,7 @@ static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state, * DNC Output is selected, the other is always off) * * @state: ptr to mt2063_state structure - * @Mode: desired reciever delivery system + * @Mode: desired receiver delivery system * * Note: Register cache must be valid for it to work */ @@ -2119,7 +2119,7 @@ static int mt2063_set_analog_params(struct dvb_frontend *fe, /* * As defined on EN 300 429, the DVB-C roll-off factor is 0.15. - * So, the amount of the needed bandwith is given by: + * So, the amount of the needed bandwidth is given by: * Bw = Symbol_rate * (1 + 0.15) * As such, the maximum symbol rate supported by 6 MHz is given by: * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds diff --git a/drivers/media/tuners/tuner-xc2028-types.h b/drivers/media/tuners/tuner-xc2028-types.h index 74dc46a..7e47987 100644 --- a/drivers/media/tuners/tuner-xc2028-types.h +++ b/drivers/media/tuners/tuner-xc2028-types.h @@ -119,7 +119,7 @@ #define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B) #define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B) -/* To preserve backward compatibilty, +/* To preserve backward compatibility, (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 2627553..08240e4 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -266,7 +266,7 @@ static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; int err; - /* exit if we didnt initialize the driver yet */ + /* exit if we didn't initialize the driver yet */ if (!state->chip_id) { mxl_debug("driver not yet initialized, exit."); goto fail; @@ -322,7 +322,7 @@ static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; int err; - /* exit if we didnt initialize the driver yet */ + /* exit if we didn't initialize the driver yet */ if (!state->chip_id) { mxl_debug("driver not yet initialized, exit."); goto fail; diff --git a/drivers/media/usb/gspca/gl860/gl860.c b/drivers/media/usb/gspca/gl860/gl860.c index cb1e64c..cea8d7f 100644 --- a/drivers/media/usb/gspca/gl860/gl860.c +++ b/drivers/media/usb/gspca/gl860/gl860.c @@ -438,7 +438,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, s32 nToSkip = sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1); - /* Test only against 0202h, so endianess does not matter */ + /* Test only against 0202h, so endianness does not matter */ switch (*(s16 *) data) { case 0x0202: /* End of frame, start a new one */ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); diff --git a/drivers/media/usb/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c index cd79c18..07529e5 100644 --- a/drivers/media/usb/gspca/pac207.c +++ b/drivers/media/usb/gspca/pac207.c @@ -416,7 +416,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { int ret = -EINVAL; diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c index a915096..2fd1c5e 100644 --- a/drivers/media/usb/gspca/pac7302.c +++ b/drivers/media/usb/gspca/pac7302.c @@ -874,7 +874,7 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { int ret = -EINVAL; u8 data0, data1; diff --git a/drivers/media/usb/gspca/stv0680.c b/drivers/media/usb/gspca/stv0680.c index 9c08276..7f94ec7 100644 --- a/drivers/media/usb/gspca/stv0680.c +++ b/drivers/media/usb/gspca/stv0680.c @@ -139,7 +139,7 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; - /* Give the camera some time to settle, otherwise initalization will + /* Give the camera some time to settle, otherwise initialization will fail on hotplug, and yes it really needs a full second. */ msleep(1000); diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c index 7b95d8e..d3e1b6d 100644 --- a/drivers/media/usb/gspca/zc3xx.c +++ b/drivers/media/usb/gspca/zc3xx.c @@ -6905,7 +6905,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, #if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ - int len) /* interrput packet length */ + int len) /* interrupt packet length */ { if (len == 8 && data[4] == 1) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index 77bbf78..78c9bc8 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -1039,7 +1039,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id /* Set the leds off */ pwc_set_leds(pdev, 0, 0); - /* Setup intial videomode */ + /* Setup initial videomode */ rc = pwc_set_video_mode(pdev, MAX_WIDTH, MAX_HEIGHT, V4L2_PIX_FMT_YUV420, 30, &compression, 1); if (rc) diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 899cb6d..898c208 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -556,7 +556,7 @@ static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample) * * SOF = ((SOF2 - SOF1) * PTS + SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1) (1) * - * to avoid loosing precision in the division. Similarly, the host timestamp is + * to avoid losing precision in the division. Similarly, the host timestamp is * computed with * * TS = ((TS2 - TS1) * PTS + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2) diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index 60dcc0f..fb46790 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -420,7 +420,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "Advanced Simple", "Core", "Simple Scalable", - "Advanced Coding Efficency", + "Advanced Coding Efficiency", NULL, }; -- cgit v0.10.2 From 20e5d580195cd4200b0f92d8007784b28c61b235 Mon Sep 17 00:00:00 2001 From: Georg Kaindl Date: Mon, 21 Oct 2013 12:01:36 -0300 Subject: [media] usbtv: Add support for PAL video source Signed-off-by: Georg Kaindl Tested-by: Lubomir Rintel Tested-by: Marcin Nowak Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c index 8a505a9..6222a4a 100644 --- a/drivers/media/usb/usbtv/usbtv.c +++ b/drivers/media/usb/usbtv/usbtv.c @@ -50,13 +50,8 @@ #define USBTV_ISOC_TRANSFERS 16 #define USBTV_ISOC_PACKETS 8 -#define USBTV_WIDTH 720 -#define USBTV_HEIGHT 480 - #define USBTV_CHUNK_SIZE 256 #define USBTV_CHUNK 240 -#define USBTV_CHUNKS (USBTV_WIDTH * USBTV_HEIGHT \ - / 4 / USBTV_CHUNK) /* Chunk header. */ #define USBTV_MAGIC_OK(chunk) ((be32_to_cpu(chunk[0]) & 0xff000000) \ @@ -65,6 +60,27 @@ #define USBTV_ODD(chunk) ((be32_to_cpu(chunk[0]) & 0x0000f000) >> 15) #define USBTV_CHUNK_NO(chunk) (be32_to_cpu(chunk[0]) & 0x00000fff) +#define USBTV_TV_STD (V4L2_STD_525_60 | V4L2_STD_PAL) + +/* parameters for supported TV norms */ +struct usbtv_norm_params { + v4l2_std_id norm; + int cap_width, cap_height; +}; + +static struct usbtv_norm_params norm_params[] = { + { + .norm = V4L2_STD_525_60, + .cap_width = 720, + .cap_height = 480, + }, + { + .norm = V4L2_STD_PAL, + .cap_width = 720, + .cap_height = 576, + } +}; + /* A single videobuf2 frame buffer. */ struct usbtv_buf { struct vb2_buffer vb; @@ -94,11 +110,38 @@ struct usbtv { USBTV_COMPOSITE_INPUT, USBTV_SVIDEO_INPUT, } input; + v4l2_std_id norm; + int width, height; + int n_chunks; int iso_size; unsigned int sequence; struct urb *isoc_urbs[USBTV_ISOC_TRANSFERS]; }; +static int usbtv_configure_for_norm(struct usbtv *usbtv, v4l2_std_id norm) +{ + int i, ret = 0; + struct usbtv_norm_params *params = NULL; + + for (i = 0; i < ARRAY_SIZE(norm_params); i++) { + if (norm_params[i].norm & norm) { + params = &norm_params[i]; + break; + } + } + + if (params) { + usbtv->width = params->cap_width; + usbtv->height = params->cap_height; + usbtv->n_chunks = usbtv->width * usbtv->height + / 4 / USBTV_CHUNK; + usbtv->norm = params->norm; + } else + ret = -EINVAL; + + return ret; +} + static int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size) { int ret; @@ -158,6 +201,57 @@ static int usbtv_select_input(struct usbtv *usbtv, int input) return ret; } +static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm) +{ + int ret; + static const u16 pal[][2] = { + { USBTV_BASE + 0x001a, 0x0068 }, + { USBTV_BASE + 0x010e, 0x0072 }, + { USBTV_BASE + 0x010f, 0x00a2 }, + { USBTV_BASE + 0x0112, 0x00b0 }, + { USBTV_BASE + 0x0117, 0x0001 }, + { USBTV_BASE + 0x0118, 0x002c }, + { USBTV_BASE + 0x012d, 0x0010 }, + { USBTV_BASE + 0x012f, 0x0020 }, + { USBTV_BASE + 0x024f, 0x0002 }, + { USBTV_BASE + 0x0254, 0x0059 }, + { USBTV_BASE + 0x025a, 0x0016 }, + { USBTV_BASE + 0x025b, 0x0035 }, + { USBTV_BASE + 0x0263, 0x0017 }, + { USBTV_BASE + 0x0266, 0x0016 }, + { USBTV_BASE + 0x0267, 0x0036 } + }; + + static const u16 ntsc[][2] = { + { USBTV_BASE + 0x001a, 0x0079 }, + { USBTV_BASE + 0x010e, 0x0068 }, + { USBTV_BASE + 0x010f, 0x009c }, + { USBTV_BASE + 0x0112, 0x00f0 }, + { USBTV_BASE + 0x0117, 0x0000 }, + { USBTV_BASE + 0x0118, 0x00fc }, + { USBTV_BASE + 0x012d, 0x0004 }, + { USBTV_BASE + 0x012f, 0x0008 }, + { USBTV_BASE + 0x024f, 0x0001 }, + { USBTV_BASE + 0x0254, 0x005f }, + { USBTV_BASE + 0x025a, 0x0012 }, + { USBTV_BASE + 0x025b, 0x0001 }, + { USBTV_BASE + 0x0263, 0x001c }, + { USBTV_BASE + 0x0266, 0x0011 }, + { USBTV_BASE + 0x0267, 0x0005 } + }; + + ret = usbtv_configure_for_norm(usbtv, norm); + + if (!ret) { + if (norm & V4L2_STD_525_60) + ret = usbtv_set_regs(usbtv, ntsc, ARRAY_SIZE(ntsc)); + else if (norm & V4L2_STD_PAL) + ret = usbtv_set_regs(usbtv, pal, ARRAY_SIZE(pal)); + } + + return ret; +} + static int usbtv_setup_capture(struct usbtv *usbtv) { int ret; @@ -225,26 +319,11 @@ static int usbtv_setup_capture(struct usbtv *usbtv) { USBTV_BASE + 0x0284, 0x0088 }, { USBTV_BASE + 0x0003, 0x0004 }, - { USBTV_BASE + 0x001a, 0x0079 }, { USBTV_BASE + 0x0100, 0x00d3 }, - { USBTV_BASE + 0x010e, 0x0068 }, - { USBTV_BASE + 0x010f, 0x009c }, - { USBTV_BASE + 0x0112, 0x00f0 }, { USBTV_BASE + 0x0115, 0x0015 }, - { USBTV_BASE + 0x0117, 0x0000 }, - { USBTV_BASE + 0x0118, 0x00fc }, - { USBTV_BASE + 0x012d, 0x0004 }, - { USBTV_BASE + 0x012f, 0x0008 }, { USBTV_BASE + 0x0220, 0x002e }, { USBTV_BASE + 0x0225, 0x0008 }, { USBTV_BASE + 0x024e, 0x0002 }, - { USBTV_BASE + 0x024f, 0x0001 }, - { USBTV_BASE + 0x0254, 0x005f }, - { USBTV_BASE + 0x025a, 0x0012 }, - { USBTV_BASE + 0x025b, 0x0001 }, - { USBTV_BASE + 0x0263, 0x001c }, - { USBTV_BASE + 0x0266, 0x0011 }, - { USBTV_BASE + 0x0267, 0x0005 }, { USBTV_BASE + 0x024e, 0x0002 }, { USBTV_BASE + 0x024f, 0x0002 }, }; @@ -253,6 +332,10 @@ static int usbtv_setup_capture(struct usbtv *usbtv) if (ret) return ret; + ret = usbtv_select_norm(usbtv, usbtv->norm); + if (ret) + return ret; + ret = usbtv_select_input(usbtv, usbtv->input); if (ret) return ret; @@ -296,7 +379,7 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) frame_id = USBTV_FRAME_ID(chunk); odd = USBTV_ODD(chunk); chunk_no = USBTV_CHUNK_NO(chunk); - if (chunk_no >= USBTV_CHUNKS) + if (chunk_no >= usbtv->n_chunks) return; /* Beginning of a frame. */ @@ -324,10 +407,10 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) usbtv->chunks_done++; /* Last chunk in a frame, signalling an end */ - if (odd && chunk_no == USBTV_CHUNKS-1) { + if (odd && chunk_no == usbtv->n_chunks-1) { int size = vb2_plane_size(&buf->vb, 0); enum vb2_buffer_state state = usbtv->chunks_done == - USBTV_CHUNKS ? + usbtv->n_chunks ? VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR; @@ -500,6 +583,8 @@ static int usbtv_querycap(struct file *file, void *priv, static int usbtv_enum_input(struct file *file, void *priv, struct v4l2_input *i) { + struct usbtv *dev = video_drvdata(file); + switch (i->index) { case USBTV_COMPOSITE_INPUT: strlcpy(i->name, "Composite", sizeof(i->name)); @@ -512,7 +597,7 @@ static int usbtv_enum_input(struct file *file, void *priv, } i->type = V4L2_INPUT_TYPE_CAMERA; - i->std = V4L2_STD_525_60; + i->std = dev->vdev.tvnorms; return 0; } @@ -531,23 +616,37 @@ static int usbtv_enum_fmt_vid_cap(struct file *file, void *priv, static int usbtv_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - f->fmt.pix.width = USBTV_WIDTH; - f->fmt.pix.height = USBTV_HEIGHT; + struct usbtv *usbtv = video_drvdata(file); + + f->fmt.pix.width = usbtv->width; + f->fmt.pix.height = usbtv->height; f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; f->fmt.pix.field = V4L2_FIELD_INTERLACED; - f->fmt.pix.bytesperline = USBTV_WIDTH * 2; + f->fmt.pix.bytesperline = usbtv->width * 2; f->fmt.pix.sizeimage = (f->fmt.pix.bytesperline * f->fmt.pix.height); f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - f->fmt.pix.priv = 0; + return 0; } static int usbtv_g_std(struct file *file, void *priv, v4l2_std_id *norm) { - *norm = V4L2_STD_525_60; + struct usbtv *usbtv = video_drvdata(file); + *norm = usbtv->norm; return 0; } +static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm) +{ + int ret = -EINVAL; + struct usbtv *usbtv = video_drvdata(file); + + if ((norm & V4L2_STD_525_60) || (norm & V4L2_STD_PAL)) + ret = usbtv_select_norm(usbtv, norm); + + return ret; +} + static int usbtv_g_input(struct file *file, void *priv, unsigned int *i) { struct usbtv *usbtv = video_drvdata(file); @@ -561,13 +660,6 @@ static int usbtv_s_input(struct file *file, void *priv, unsigned int i) return usbtv_select_input(usbtv, i); } -static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm) -{ - if (norm & V4L2_STD_525_60) - return 0; - return -EINVAL; -} - struct v4l2_ioctl_ops usbtv_ioctl_ops = { .vidioc_querycap = usbtv_querycap, .vidioc_enum_input = usbtv_enum_input, @@ -604,10 +696,12 @@ static int usbtv_queue_setup(struct vb2_queue *vq, const struct v4l2_format *v4l_fmt, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) { + struct usbtv *usbtv = vb2_get_drv_priv(vq); + if (*nbuffers < 2) *nbuffers = 2; *nplanes = 1; - sizes[0] = USBTV_WIDTH * USBTV_HEIGHT / 2 * sizeof(u32); + sizes[0] = USBTV_CHUNK * usbtv->n_chunks * 2 * sizeof(u32); return 0; } @@ -690,7 +784,11 @@ static int usbtv_probe(struct usb_interface *intf, return -ENOMEM; usbtv->dev = dev; usbtv->udev = usb_get_dev(interface_to_usbdev(intf)); + usbtv->iso_size = size; + + (void)usbtv_configure_for_norm(usbtv, V4L2_STD_525_60); + spin_lock_init(&usbtv->buflock); mutex_init(&usbtv->v4l2_lock); mutex_init(&usbtv->vb2q_lock); @@ -727,7 +825,7 @@ static int usbtv_probe(struct usb_interface *intf, usbtv->vdev.release = video_device_release_empty; usbtv->vdev.fops = &usbtv_fops; usbtv->vdev.ioctl_ops = &usbtv_ioctl_ops; - usbtv->vdev.tvnorms = V4L2_STD_525_60; + usbtv->vdev.tvnorms = USBTV_TV_STD; usbtv->vdev.queue = &usbtv->vb2q; usbtv->vdev.lock = &usbtv->v4l2_lock; set_bit(V4L2_FL_USE_FH_PRIO, &usbtv->vdev.flags); -- cgit v0.10.2 From bdee6bdb67e84aaf26a163aced908f4ab6bbd06b Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 6 Nov 2013 05:39:35 -0300 Subject: [media] em28xx-video: Swap release order to avoid lock nesting vb2_fop_release might take the video queue mutex lock. In order to avoid nesting mutexes the private mutex is taken after the fop_release has finished. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index fc5d60e..dd19c9f 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -1664,8 +1664,8 @@ static int em28xx_v4l2_close(struct file *filp) em28xx_videodbg("users=%d\n", dev->users); - mutex_lock(&dev->lock); vb2_fop_release(filp); + mutex_lock(&dev->lock); if (dev->users == 1) { /* the device is already disconnect, -- cgit v0.10.2 From 06eb891edb4009245278a0ae50ccfd6fc99004d2 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 6 Nov 2013 11:40:18 -0300 Subject: [media] ths7303: Declare as static a private function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit git grep shows that the function is only called from ths7303.c Fix this build warning: CC drivers/media/i2c/ths7303.o drivers/media/i2c/ths7303.c:86:5: warning: no previous prototype for ‘ths7303_setval’ [-Wmissing-prototypes] int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) ^ Signed-off-by: Ricardo Ribalda Delgado Acked-by: Laurent Pinchart Acked-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/ths7303.c b/drivers/media/i2c/ths7303.c index 42276d9..ed9ae88 100644 --- a/drivers/media/i2c/ths7303.c +++ b/drivers/media/i2c/ths7303.c @@ -83,7 +83,8 @@ static int ths7303_write(struct v4l2_subdev *sd, u8 reg, u8 val) } /* following function is used to set ths7303 */ -int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) +static int ths7303_setval(struct v4l2_subdev *sd, + enum ths7303_filter_mode mode) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ths7303_state *state = to_state(sd); -- cgit v0.10.2 From 326f5a3fc502f96bce991bedd1957adc2758dba9 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Tue, 5 Nov 2013 05:29:07 -0300 Subject: [media] media: marvell-ccic: use devm to release clk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch uses devm to release the clks instead of releasing manually. And it adds enable/disable mipi_clk when getting its rate. Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Acked-by: Uwe Kleine-König Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 70cb57f..054507f 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -142,12 +142,6 @@ static int mmpcam_power_up(struct mcam_camera *mcam) struct mmp_camera *cam = mcam_to_cam(mcam); struct mmp_camera_platform_data *pdata; - if (mcam->bus_type == V4L2_MBUS_CSI2) { - cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); - if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) - return PTR_ERR(cam->mipi_clk); - } - /* * Turn on power and clocks to the controller. */ @@ -186,12 +180,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam) gpio_set_value(pdata->sensor_power_gpio, 0); gpio_set_value(pdata->sensor_reset_gpio, 0); - if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) { - if (cam->mipi_clk) - devm_clk_put(mcam->dev, cam->mipi_clk); - cam->mipi_clk = NULL; - } - mcam_clk_disable(mcam); } @@ -292,8 +280,9 @@ void mmpcam_calc_dphy(struct mcam_camera *mcam) return; /* get the escape clk, this is hard coded */ + clk_prepare_enable(cam->mipi_clk); tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12; - + clk_disable_unprepare(cam->mipi_clk); /* * dphy[2] - CSI2_DPHY6: * bit 0 ~ bit 7: CK Term Enable @@ -325,19 +314,6 @@ static irqreturn_t mmpcam_irq(int irq, void *data) return IRQ_RETVAL(handled); } -static void mcam_deinit_clk(struct mcam_camera *mcam) -{ - unsigned int i; - - for (i = 0; i < NR_MCAM_CLK; i++) { - if (!IS_ERR(mcam->clk[i])) { - if (mcam->clk[i]) - devm_clk_put(mcam->dev, mcam->clk[i]); - } - mcam->clk[i] = NULL; - } -} - static void mcam_init_clk(struct mcam_camera *mcam) { unsigned int i; @@ -371,7 +347,6 @@ static int mmpcam_probe(struct platform_device *pdev) if (cam == NULL) return -ENOMEM; cam->pdev = pdev; - cam->mipi_clk = NULL; INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; @@ -387,6 +362,11 @@ static int mmpcam_probe(struct platform_device *pdev) mcam->mclk_div = pdata->mclk_div; mcam->bus_type = pdata->bus_type; mcam->dphy = pdata->dphy; + if (mcam->bus_type == V4L2_MBUS_CSI2) { + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) + return PTR_ERR(cam->mipi_clk); + } mcam->mipi_enabled = false; mcam->lane = pdata->lane; mcam->chip_id = MCAM_ARMADA610; @@ -444,7 +424,7 @@ static int mmpcam_probe(struct platform_device *pdev) */ ret = mmpcam_power_up(mcam); if (ret) - goto out_deinit_clk; + return ret; ret = mccic_register(mcam); if (ret) goto out_power_down; @@ -469,8 +449,6 @@ out_unregister: mccic_shutdown(mcam); out_power_down: mmpcam_power_down(mcam); -out_deinit_clk: - mcam_deinit_clk(mcam); return ret; } @@ -482,7 +460,6 @@ static int mmpcam_remove(struct mmp_camera *cam) mmpcam_remove_device(cam); mccic_shutdown(mcam); mmpcam_power_down(mcam); - mcam_deinit_clk(mcam); return 0; } -- cgit v0.10.2 From eed5b0cfb4f1ac0715106b79b24f19fad6000416 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 21 Oct 2013 16:56:36 -0300 Subject: [media] rtl2830: add parent for I2C adapter i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c index 7efb796..50e8b63 100644 --- a/drivers/media/dvb-frontends/rtl2830.c +++ b/drivers/media/dvb-frontends/rtl2830.c @@ -710,6 +710,7 @@ struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, sizeof(priv->tuner_i2c_adapter.name)); priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo; priv->tuner_i2c_adapter.algo_data = NULL; + priv->tuner_i2c_adapter.dev.parent = &i2c->dev; i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { dev_err(&i2c->dev, -- cgit v0.10.2 From 3d8b24d27808e6ab95eae70cb15315051a7f90eb Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 18 Oct 2013 00:07:11 -0300 Subject: [media] mt9p031: Include linux/of.h header 'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index 4734836..1c2303d 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From a1b6fa85c639ad0d5447d1a5e7d1463bbe29fcd3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 9 Dec 2013 15:24:19 +0800 Subject: regulator: pfuze100: Fix address of FABID According to the datasheet, the address of FABID is 0x4. Fix it. Signed-off-by: Axel Lin Acked-by: Robin Gong Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index ba67b2c..565a631 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -38,7 +38,7 @@ #define PFUZE100_DEVICEID 0x0 #define PFUZE100_REVID 0x3 -#define PFUZE100_FABID 0x3 +#define PFUZE100_FABID 0x4 #define PFUZE100_SW1ABVOL 0x20 #define PFUZE100_SW1CVOL 0x2e -- cgit v0.10.2 From 236c427cbc990e03ec8b39ce8ee9220705daeff9 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 5 Nov 2013 21:17:25 -0800 Subject: regulator: pfuze100: allow misprogrammed ID prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by: Tim Harvey Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 565a631..8b5e4c7 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) if (ret) return ret; - if (value & 0x0f) { - dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); - return -ENODEV; + switch (value & 0x0f) { + /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */ + case 0x8: + dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); + case 0x0: + break; + default: + dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); + return -ENODEV; } ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); -- cgit v0.10.2 From 313a76ee11cda6700548afe68499ef174a240688 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 8 Dec 2013 18:39:02 -0700 Subject: ARM: OMAP2+: hwmod: Fix SOFTRESET logic In _ocp_softreset(), after _set_softreset() + write_sysconfig(), the hwmod's sysc_cache will always contain SOFTRESET bit set so all further writes to sysconfig using this cache will initiate a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like platforms that have RESET_DONE status in the SYSSTATUS register and so the the SOFTRESET bit in SYSCONFIG is not automatically cleared. It is not a problem for OMAP4 like platforms that indicate RESET completion by clearing the SOFTRESET bit in the SYSCONFIG register. This repeated SOFTRESET is undesired and was the root cause of USB host issues on OMAP3 platforms when hwmod was allowed to do the SOFTRESET for the USB Host module. To fix this we clear the SOFTRESET bit and update the sysconfig register + sysc_cache using write_sysconfig(). Signed-off-by: Roger Quadros Tested-by: Tomi Valkeinen # Panda, BeagleXM [paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e3f0eca..cacc0c7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v) } /** - * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v + * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v * @oh: struct omap_hwmod * * @v: pointer to register contents to modify * @@ -427,6 +427,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v + * @oh: struct omap_hwmod * + * @v: pointer to register contents to modify + * + * Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _clear_softreset(struct omap_hwmod *oh, u32 *v) +{ + u32 softrst_mask; + + if (!oh->class->sysc || + !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) + return -EINVAL; + + if (!oh->class->sysc->sysc_fields) { + WARN(1, + "omap_hwmod: %s: sysc_fields absent for sysconfig class\n", + oh->name); + return -EINVAL; + } + + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); + + *v &= ~softrst_mask; + + return 0; +} + +/** * _wait_softreset_complete - wait for an OCP softreset to complete * @oh: struct omap_hwmod * to wait on * @@ -1911,6 +1941,12 @@ static int _ocp_softreset(struct omap_hwmod *oh) ret = _set_softreset(oh, &v); if (ret) goto dis_opt_clks; + + _write_sysconfig(v, oh); + ret = _clear_softreset(oh, &v); + if (ret) + goto dis_opt_clks; + _write_sysconfig(v, oh); if (oh->class->sysc->srst_udelay) @@ -3169,6 +3205,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh) goto error; _write_sysconfig(v, oh); + ret = _clear_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + error: return ret; } -- cgit v0.10.2 From 7f4d3641e2548d1ac5dee837ff434df668a2810c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 8 Dec 2013 18:39:02 -0700 Subject: ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module Unlike what the comment states, errata i660 does not state that we can't RESET the USB host module. Instead it states that RESET is the only way to recover from a deadlock situation. RESET ensures that the module is in a known good state irrespective of what bootloader does with the module, so it must be done at boot. Signed-off-by: Roger Quadros Tested-by: Tomi Valkeinen # Panda, BeagleXM Fixes: de231388cb80 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9e56fab..d337429 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), .sysc_fields = &omap_hwmod_sysc_type1, @@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, }; /* -- cgit v0.10.2 From 0e7dc862cf687234ed1b01a6b2461b782ea0bca0 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sun, 8 Dec 2013 18:39:03 -0700 Subject: ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present commit dc75925d(OMAP: hwmod: Fix the missing braces) introduced missing braces, however, we just set return result if clk_get fail and we populate the error pointer in clk pointer and pass it along to clk_prepare. This is wrong. The intent seems to be retry remaining clocks if they are available and warn the ones we cant find clks for. With the current logic, we see the following crash: omap_hwmod: l3_main: cannot clk_get interface_clk emac_ick Unable to handle kernel NULL pointer dereference at virtual address 00000032 pgd = c0004000 [00000032] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-00044-gcc9fd5a-dirty #19 task: ce0c3440 ti: ce0c4000 task.ti: ce0c4000 PC is at __clk_prepare+0x10/0x74 LR is at clk_prepare+0x14/0x24 [] (__clk_prepare+0x10/0x74) from [] (clk_prepare+0x14/0x24) [] (clk_prepare+0x14/0x24) from [] (_init+0x24c/0x3bc) [] (_init+0x24c/0x3bc) from [] (omap_hwmod_for_each+0x34/0x5c) [] (omap_hwmod_for_each+0x34/0x5c) from [] (__omap_hwmod_setup_all+0x24/0x40) [] (__omap_hwmod_setup_all+0x24/0x40) from [] (do_one_initcall+0x38/0x168) [] (do_one_initcall+0x38/0x168) from [] (kernel_init_freeable+0xfc/0x1cc) [] (kernel_init_freeable+0xfc/0x1cc) from [] (kernel_init+0x8/0x110) [] (kernel_init+0x8/0x110) from [] (ret_from_fork+0x14/0x2c) Code: e92d4038 e2504000 01a05004 0a000005 (e5943034) So, just warn and continue instead of proceeding and crashing, with missing clock nodes/bad data, we will eventually fail, however we should now have enough information to identify the culprit. Signed-off-by: Nishanth Menon Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index cacc0c7..461d590 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -815,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh) pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; + continue; } os->_clk = c; /* @@ -851,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh) pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; + continue; } oc->_clk = c; /* -- cgit v0.10.2 From bbf807bc0697e577c137a5fffb30fca7c6a45da1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 5 Dec 2013 15:20:53 +0100 Subject: ath9k: fix duration calculation for non-aggregated packets When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 09cdbcd..b5a19e0 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1276,6 +1276,10 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf, if (!rts_thresh || (len > rts_thresh)) rts = true; } + + if (!aggr) + len = fi->framelen; + ath_buf_set_rate(sc, bf, &info, len, rts); } -- cgit v0.10.2 From 9f28cde0bc643186d32744ce69d12222e8588fe7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 6 Dec 2013 12:30:42 +0000 Subject: ARM: another fix for the DMA mapping checks Peter reports that OMAP audio broke with the recent fix for these checks, caused by OMAP audio using a 64-bit DMA mask. We should allow 64-bit DMA masks even with 32-bit dma_addr_t if we can be sure the amount of RAM we have won't allow the 32-bit dma_addr_t to overflow. Unfortunately, the checks to detect overflow were not correct. Tested-by: Peter Ujfalusi Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f6b6bfa..f61a570 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -158,13 +158,49 @@ struct dma_map_ops arm_coherent_dma_ops = { }; EXPORT_SYMBOL(arm_coherent_dma_ops); +static int __dma_supported(struct device *dev, u64 mask, bool warn) +{ + unsigned long max_dma_pfn; + + /* + * If the mask allows for more memory than we can address, + * and we actually have that much memory, then we must + * indicate that DMA to this device is not supported. + */ + if (sizeof(mask) != sizeof(dma_addr_t) && + mask > (dma_addr_t)~0 && + dma_to_pfn(dev, ~0) < max_pfn) { + if (warn) { + dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", + mask); + dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); + } + return 0; + } + + max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); + + /* + * Translate the device's DMA mask to a PFN limit. This + * PFN number includes the page which we can DMA to. + */ + if (dma_to_pfn(dev, mask) < max_dma_pfn) { + if (warn) + dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", + mask, + dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, + max_dma_pfn + 1); + return 0; + } + + return 1; +} + static u64 get_coherent_dma_mask(struct device *dev) { u64 mask = (u64)DMA_BIT_MASK(32); if (dev) { - unsigned long max_dma_pfn; - mask = dev->coherent_dma_mask; /* @@ -176,34 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } - max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); - - /* - * If the mask allows for more memory than we can address, - * and we actually have that much memory, then fail the - * allocation. - */ - if (sizeof(mask) != sizeof(dma_addr_t) && - mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > max_dma_pfn) { - dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", - mask); - dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); - return 0; - } - - /* - * Now check that the mask, when translated to a PFN, - * fits within the allowable addresses which we can - * allocate. - */ - if (dma_to_pfn(dev, mask) < max_dma_pfn) { - dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", - mask, - dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, - arm_dma_pfn_limit + 1); + if (!__dma_supported(dev, mask, true)) return 0; - } } return mask; @@ -1032,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, */ int dma_supported(struct device *dev, u64 mask) { - unsigned long limit; - - /* - * If the mask allows for more memory than we can address, - * and we actually have that much memory, then we must - * indicate that DMA to this device is not supported. - */ - if (sizeof(mask) != sizeof(dma_addr_t) && - mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) - return 0; - - /* - * Translate the device's DMA mask to a PFN limit. This - * PFN number includes the page which we can DMA to. - */ - limit = dma_to_pfn(dev, mask); - - if (limit < arm_dma_pfn_limit) - return 0; - - return 1; + return __dma_supported(dev, mask, false); } EXPORT_SYMBOL(dma_supported); -- cgit v0.10.2 From 787b0d5c1ca7ff24feb6f92e4c7f4410ee7d81a8 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 2 Dec 2013 20:29:12 +0100 Subject: ARM: 7908/1: mm: Fix the arm_dma_limit calculation Current code is using PHYS_OFFSET to calculate the arm_dma_limit which will lead to wrong calculations in cases where PHYS_OFFSET is updated runtime. So fix the code by using __pv_phys_offset instead of PHYS_OFFSET. Cc: Catalin Marinas Cc: Nicolas Pitre Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3e8f106e..1f7b19a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc) #ifdef CONFIG_ZONE_DMA if (mdesc->dma_zone_size) { arm_dma_zone_size = mdesc->dma_zone_size; - arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1; + arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1; } else arm_dma_limit = 0xffffffff; arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT; -- cgit v0.10.2 From 7c927322d349e37eef38d121c6f596ba816a40b2 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 2 Dec 2013 20:29:59 +0100 Subject: ARM: 7909/1: mm: Call setup_dma_zone() post early_paging_init() To get updated __pv_phys_offset, setup_dma_zone() needs to be called after early_paging_init(). Cc: Catalin Marinas Cc: Nicolas Pitre Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6a1b8a8..987a7f5 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; - setup_dma_zone(mdesc); - if (mdesc->reboot_mode != REBOOT_HARD) reboot_mode = mdesc->reboot_mode; @@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p) sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); early_paging_init(mdesc, lookup_processor_type(read_cpuid_id())); + setup_dma_zone(mdesc); sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); -- cgit v0.10.2 From 1b15ec7a7427d4188ba91b9bbac696250a059d22 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 5 Dec 2013 14:21:36 +0100 Subject: ARM: 7912/1: check stack pointer in get_wchan get_wchan() is lockless. Task may wakeup at any time and change its own stack, thus each next stack frame may be overwritten and filled with random stuff. /proc/$pid/stack interface had been disabled for non-current tasks, see [1] But 'wchan' still allows to trigger stack frame unwinding on volatile stack. This patch fixes oops in unwind_frame() by adding stack pointer validation on each step (as x86 code do), unwind_frame() already checks frame pointer. Also I've found another report of this oops on stackoverflow (irony). Link: http://www.spinics.net/lists/arm-kernel/msg110589.html [1] Link: http://stackoverflow.com/questions/18479894/unwind-frame-cause-a-kernel-paging-error Cc: Signed-off-by: Konstantin Khlebnikov Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 94f6b05..92f7b15 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu); unsigned long get_wchan(struct task_struct *p) { struct stackframe frame; + unsigned long stack_page; int count = 0; if (!p || p == current || p->state == TASK_RUNNING) return 0; @@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p) frame.sp = thread_saved_sp(p); frame.lr = 0; /* recovered from the stack */ frame.pc = thread_saved_pc(p); + stack_page = (unsigned long)task_stack_page(p); do { - int ret = unwind_frame(&frame); - if (ret < 0) + if (frame.sp < stack_page || + frame.sp >= stack_page + THREAD_SIZE || + unwind_frame(&frame) < 0) return 0; if (!in_sched_functions(frame.pc)) return frame.pc; -- cgit v0.10.2 From 3abb6671a9c04479c4bd026798a05f857393b7e2 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 5 Dec 2013 14:23:48 +0100 Subject: ARM: 7913/1: fix framepointer check in unwind_frame This patch fixes corner case when (fp + 4) overflows unsigned long, for example: fp = 0xFFFFFFFF -> fp + 4 == 3. Cc: Signed-off-by: Konstantin Khlebnikov Signed-off-by: Russell King diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 00f79e5..af4e8c8 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame) high = ALIGN(low, THREAD_SIZE); /* check current frame pointer is within bounds */ - if (fp < (low + 12) || fp + 4 >= high) + if (fp < low + 12 || fp > high - 4) return -EINVAL; /* restore the registers from the stack frame */ -- cgit v0.10.2 From b31459adeab018b297541e288ac88873011da82a Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Mon, 9 Dec 2013 13:45:46 +0100 Subject: ARM: 7917/1: cacheflush: correctly limit range of memory region being flushed The __do_cache_op function operates with a 'chunk' size of one page but fails to limit the size of the final chunk so as to not exceed the specified memory region. Fix this. Cc: Reported-by: Christian Gmeiner Tested-by: Christian Gmeiner Acked-by: Will Deacon Signed-off-by: Jon Medhurst Signed-off-by: Russell King diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index dbf0923..7940241 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -509,9 +509,10 @@ static inline int __do_cache_op(unsigned long start, unsigned long end) { int ret; - unsigned long chunk = PAGE_SIZE; do { + unsigned long chunk = min(PAGE_SIZE, end - start); + if (signal_pending(current)) { struct thread_info *ti = current_thread_info(); -- cgit v0.10.2 From 8b3b005d675726e38bc504d2e35a991e55819155 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 9 Dec 2013 15:43:38 -0800 Subject: x86, build: Pass in additional -mno-mmx, -mno-sse options In checkin 5551a34e5aea x86-64, build: Always pass in -mno-sse we unconditionally added -mno-sse to the main build, to keep newer compilers from generating SSE instructions from autovectorization. However, this did not extend to the special environments (arch/x86/boot, arch/x86/boot/compressed, and arch/x86/realmode/rm). Add -mno-sse to the compiler command line for these environments, and add -mno-mmx to all the environments as well, as we don't want a compiler to generate MMX code either. This patch also removes a $(cc-option) call for -m32, since we have long since stopped supporting compilers too old for the -m32 option, and in fact hardcode it in other places in the Makefiles. Reported-by: Kevin B. Smith Cc: Sunil K. Pandey Signed-off-by: H. Peter Anvin Cc: H. J. Lu Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org Cc: # build fix only diff --git a/arch/x86/Makefile b/arch/x86/Makefile index eda00f9..57d0215 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -31,8 +31,8 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return - # Don't autogenerate SSE instructions - KBUILD_CFLAGS += -mno-sse + # Don't autogenerate MMX or SSE instructions + KBUILD_CFLAGS += -mno-mmx -mno-sse # Never want PIC in a 32-bit kernel, prevent breakage with GCC built # with nonstandard options @@ -60,8 +60,8 @@ else KBUILD_AFLAGS += -m64 KBUILD_CFLAGS += -m64 - # Don't autogenerate SSE instructions - KBUILD_CFLAGS += -mno-sse + # Don't autogenerate MMX or SSE instructions + KBUILD_CFLAGS += -mno-mmx -mno-sse # Use -mpreferred-stack-boundary=3 if supported. KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index dce69a2..d9c1195 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -53,18 +53,18 @@ $(obj)/cpustr.h: $(obj)/mkcpustr FORCE # How to compile the 16-bit code. Note we always compile for -march=i386, # that way we can complain to the user if the CPU is insufficient. -KBUILD_CFLAGS := $(USERINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ +KBUILD_CFLAGS := $(USERINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ \ -DDISABLE_BRANCH_PROFILING \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ + -mno-mmx -mno-sse \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-unit-at-a-time)) \ $(call cc-option, -fno-stack-protector) \ $(call cc-option, -mpreferred-stack-boundary=2) -KBUILD_CFLAGS += $(call cc-option, -m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ GCOV_PROFILE := n diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index dcd90df..c8a6792 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -13,6 +13,7 @@ KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING cflags-$(CONFIG_X86_32) := -march=i386 cflags-$(CONFIG_X86_64) := -mcmodel=small KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += -mno-mmx -mno-sse KBUILD_CFLAGS += $(call cc-option,-ffreestanding) KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 8869287..9cac825 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -73,9 +73,10 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ + -mno-mmx -mno-sse \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-unit-at-a-time)) \ $(call cc-option, -fno-stack-protector) \ $(call cc-option, -mpreferred-stack-boundary=2) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -- cgit v0.10.2 From 2d6f0c3ae609a73ce6753395daaab3204cd33918 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Nov 2013 14:55:22 +1100 Subject: powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e59caf8..64bf8db 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -246,8 +246,8 @@ _GLOBAL(__bswapdi2) or r3,r7,r9 blr -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) +#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX _GLOBAL(rmci_on) sync isync @@ -277,6 +277,9 @@ _GLOBAL(rmci_off) isync sync blr +#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */ + +#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* * Do an IO access in real mode -- cgit v0.10.2 From 1b429835be7ce514b36b551e785d425fd56cd1f2 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Fri, 6 Dec 2013 19:43:37 -0500 Subject: powerpc/44x: Fix ocm_block allocation Allocate enough memory for the ocm_block structure, not just a pointer to it. Signed-off-by: Ilia Mirkin Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/sysdev/ppc4xx_ocm.c b/arch/powerpc/sysdev/ppc4xx_ocm.c index b7c4345..85d9e37 100644 --- a/arch/powerpc/sysdev/ppc4xx_ocm.c +++ b/arch/powerpc/sysdev/ppc4xx_ocm.c @@ -339,7 +339,7 @@ void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align, if (IS_ERR_VALUE(offset)) continue; - ocm_blk = kzalloc(sizeof(struct ocm_block *), GFP_KERNEL); + ocm_blk = kzalloc(sizeof(struct ocm_block), GFP_KERNEL); if (!ocm_blk) { printk(KERN_ERR "PPC4XX OCM: could not allocate ocm block"); rh_free(ocm_reg->rh, offset); -- cgit v0.10.2 From cf77ee54362a245f9a01f240adce03a06c05eb68 Mon Sep 17 00:00:00 2001 From: "Hong H. Pham" Date: Sat, 7 Dec 2013 09:06:33 -0500 Subject: powerpc: Fix PTE page address mismatch in pgtable ctor/dtor In pte_alloc_one(), pgtable_page_ctor() is passed an address that has not been converted by page_address() to the newly allocated PTE page. When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor() with an address to the PTE page that has been converted by page_address(). The mismatch in the PTE's page address causes pgtable_page_dtor() to access invalid memory, so resources for that PTE (such as the page lock) is not properly cleaned up. On PPC32, only SMP kernels are affected. On PPC64, only SMP kernels with 4K page size are affected. This bug was introduced by commit d614bb041209fd7cb5e4b35e11a7b2f6ee8f62b8 "powerpc: Move the pte free routines from common header". On a preempt-rt kernel, a spinlock is dynamically allocated for each PTE in pgtable_page_ctor(). When the PTE is freed, calling pgtable_page_dtor() with a mismatched page address causes a memory leak, as the pointer to the PTE's spinlock is bogus. On mainline, there isn't any immediately obvious symptoms, but the problem still exists here. Fixes: d614bb041209fd7c "powerpc: Move the pte free routes from common header" Cc: Paul Mackerras Cc: Aneesh Kumar K.V Cc: Benjamin Herrenschmidt Cc: linux-stable # v3.10+ Signed-off-by: Hong H. Pham Reviewed-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h index 27b2386..842846c 100644 --- a/arch/powerpc/include/asm/pgalloc-32.h +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -84,10 +84,8 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - struct page *page = page_address(table); - tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(page); - pgtable_free_tlb(tlb, page, 0); + pgtable_page_dtor(table); + pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 6940128..4b0be20 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -148,11 +148,9 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - struct page *page = page_address(table); - tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(page); - pgtable_free_tlb(tlb, page, 0); + pgtable_page_dtor(table); + pgtable_free_tlb(tlb, page_address(table), 0); } #else /* if CONFIG_PPC_64K_PAGES */ -- cgit v0.10.2 From 212c0cbd5be721a39ef3e2f723e0c78008f9e955 Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Wed, 4 Dec 2013 17:49:51 +0100 Subject: offb: Little endian fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by: Cédric Le Goater Signed-off-by: Benjamin Herrenschmidt diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 9dbea22..43a0a52 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -301,7 +301,7 @@ static struct fb_ops offb_ops = { static void __iomem *offb_map_reg(struct device_node *np, int index, unsigned long offset, unsigned long size) { - const u32 *addrp; + const __be32 *addrp; u64 asize, taddr; unsigned int flags; @@ -369,7 +369,11 @@ static void offb_init_palette_hacks(struct fb_info *info, struct device_node *dp } of_node_put(pciparent); } else if (dp && of_device_is_compatible(dp, "qemu,std-vga")) { - const u32 io_of_addr[3] = { 0x01000000, 0x0, 0x0 }; +#ifdef __BIG_ENDIAN + const __be32 io_of_addr[3] = { 0x01000000, 0x0, 0x0 }; +#else + const __be32 io_of_addr[3] = { 0x00000001, 0x0, 0x0 }; +#endif u64 io_addr = of_translate_address(dp, io_of_addr); if (io_addr != OF_BAD_ADDR) { par->cmap_adr = ioremap(io_addr + 0x3c8, 2); @@ -535,7 +539,7 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) unsigned int flags, rsize, addr_prop = 0; unsigned long max_size = 0; u64 rstart, address = OF_BAD_ADDR; - const u32 *pp, *addrp, *up; + const __be32 *pp, *addrp, *up; u64 asize; int foreign_endian = 0; @@ -551,25 +555,25 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) if (pp == NULL) pp = of_get_property(dp, "depth", &len); if (pp && len == sizeof(u32)) - depth = *pp; + depth = be32_to_cpup(pp); pp = of_get_property(dp, "linux,bootx-width", &len); if (pp == NULL) pp = of_get_property(dp, "width", &len); if (pp && len == sizeof(u32)) - width = *pp; + width = be32_to_cpup(pp); pp = of_get_property(dp, "linux,bootx-height", &len); if (pp == NULL) pp = of_get_property(dp, "height", &len); if (pp && len == sizeof(u32)) - height = *pp; + height = be32_to_cpup(pp); pp = of_get_property(dp, "linux,bootx-linebytes", &len); if (pp == NULL) pp = of_get_property(dp, "linebytes", &len); if (pp && len == sizeof(u32) && (*pp != 0xffffffffu)) - pitch = *pp; + pitch = be32_to_cpup(pp); else pitch = width * ((depth + 7) / 8); -- cgit v0.10.2 From e1edf18b20076da83dd231dbd2146cbbc31c0b14 Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Wed, 4 Dec 2013 17:49:52 +0100 Subject: offb: Add palette hack for little endian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The pseudo palette color entries need to be ajusted for little endian. This patch byteswaps the values in the pseudo palette depending on the host endian order and the screen depth. Signed-off-by: Cédric Le Goater Signed-off-by: Benjamin Herrenschmidt diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 43a0a52..7d44d66 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -91,6 +91,15 @@ extern boot_infos_t *boot_infos; #define AVIVO_DC_LUTB_WHITE_OFFSET_GREEN 0x6cd4 #define AVIVO_DC_LUTB_WHITE_OFFSET_RED 0x6cd8 +#define FB_RIGHT_POS(p, bpp) (fb_be_math(p) ? 0 : (32 - (bpp))) + +static inline u32 offb_cmap_byteswap(struct fb_info *info, u32 value) +{ + u32 bpp = info->var.bits_per_pixel; + + return cpu_to_be32(value) >> FB_RIGHT_POS(info, bpp); +} + /* * Set a single color register. The values supplied are already * rounded down to the hardware's capabilities (according to the @@ -120,7 +129,7 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, mask <<= info->var.transp.offset; value |= mask; } - pal[regno] = value; + pal[regno] = offb_cmap_byteswap(info, value); return 0; } -- cgit v0.10.2 From fbae00e63d18ae50bcc902ca1a2439206445726c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 9 Dec 2013 15:40:20 -0800 Subject: powerpc/pasemi: Turn on devtmpfs in defconfig At least some distros expect it these days; turn it on. Also, random churn from doing a savedefconfig for the first time in a year or so. Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index bd8a6f7..cec044a 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC64=y CONFIG_ALTIVEC=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -45,8 +44,9 @@ CONFIG_INET_AH=y CONFIG_INET_ESP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_SLRAM=y CONFIG_MTD_PHRAM=y @@ -88,7 +88,6 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_MII=y CONFIG_TIGON3=y CONFIG_E1000=y CONFIG_PASEMI_MAC=y @@ -174,8 +173,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -- cgit v0.10.2 From 84953f969bd198b342330b4867856d228260c96e Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 9 Dec 2013 22:15:44 +0100 Subject: powerpc/52xx: Re-enable bestcomm driver in defconfigs The bestcomm driver has been moved to drivers/dma, so to select this driver by default additionally CONFIG_DMADEVICES has to be enabled. Currently it is not enabled in the config despite existing CONFIG_PPC_BESTCOMM=y in the config files. Fix it. Signed-off-by: Anatolij Gustschin Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 69b57da..0b88c7b 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -12,7 +12,6 @@ CONFIG_EXPERT=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set @@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index f3638ae..104a332 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_LITE5200=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SPARSE_IRQ=y @@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 0c7de96..0d13ad7 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -12,7 +12,6 @@ CONFIG_EXPERT=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set @@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 22e7195..430aa18 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y @@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 716a37b..7af4c5b 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 6640a35..8b682d1c 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_LPBFIFO=m # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SIMPLE_GPIO=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -- cgit v0.10.2 From 08607afba64cc7a14d22b8aa2837d00f1d877d83 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 9 Dec 2013 14:41:01 -0200 Subject: powernv: Fix VFIO support with PHB3 I have recently found out that no iommu_groups could be found under /sys/ on a P8. That prevents PCI passthrough from working. During my investigation, I found out there seems to be a missing iommu_register_group for PHB3. The following patch seems to fix the problem. After applying it, I see iommu_groups under /sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter, which gives me a device at /dev/vfio/. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 084cdfa..2c6d173 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -720,6 +720,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; } iommu_init_table(tbl, phb->hose->node); + iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) set_iommu_table_base(&pe->pdev->dev, tbl); -- cgit v0.10.2 From e641eb03ab2b0f065fa5e64b4202fb5b0441b427 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Mon, 9 Dec 2013 15:33:39 +0530 Subject: powerpc: Fix up the kdump base cap to 128M The current logic sets the kdump base to min of 2G or ppc64_rma_size/2. On PowerNV kernel the first memory block 'memory@0' can be very large, equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on PowerNV, kdump base is set to 512M resulting kdump to fail while allocating paca array. This is because, paca need its memory from RMA region capped at 256M (see allocate_pacas()). This patch lowers the kdump base cap to 128M so that kdump kernel can successfully get memory below 256M for paca allocation. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 88a7fb4..75d4f73 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -148,7 +148,7 @@ void __init reserve_crashkernel(void) * a small SLB (128MB) since the crash kernel needs to place * itself and some stacks to be in the first segment. */ - crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2)); + crashk_res.start = min(0x8000000ULL, (ppc64_rma_size / 2)); #else crashk_res.start = KDUMP_KERNELBASE; #endif -- cgit v0.10.2 From a3300ef4bbb1f1e33ff0400e1e6cf7733d988f4f Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 7 Dec 2013 03:33:45 +0100 Subject: ipv6: don't count addrconf generated routes against gc limit Brett Ciphery reported that new ipv6 addresses failed to get installed because the addrconf generated dsts where counted against the dst gc limit. We don't need to count those routes like we currently don't count administratively added routes. Because the max_addresses check enforces a limit on unbounded address generation first in case someone plays with router advertisments, we are still safe here. Reported-by: Brett Ciphery Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index ddb9d41..a0a48ac 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2166,12 +2166,10 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, bool anycast) { struct net *net = dev_net(idev->dev); - struct rt6_info *rt = ip6_dst_alloc(net, net->loopback_dev, 0, NULL); - - if (!rt) { - net_warn_ratelimited("Maximum number of routes reached, consider increasing route/max_size\n"); + struct rt6_info *rt = ip6_dst_alloc(net, net->loopback_dev, + DST_NOCOUNT, NULL); + if (!rt) return ERR_PTR(-ENOMEM); - } in6_dev_hold(idev); -- cgit v0.10.2 From 243fedd5fa4a4a72caae7bde3f0bd0354a256b88 Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Sat, 7 Dec 2013 13:40:48 +0530 Subject: net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers There are no specific interrupts for the PONG buffer on both transmit and receive side, same interrupt is valid for both buffers. So, this patch removes this code. Signed-off-by: Srikanth Thokala Reviewed-by: Michal Simek Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 74234a5..b2850fd 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -163,26 +163,9 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, drvdata->base_addr + XEL_TSR_OFFSET); - /* Enable the Tx interrupts for the second Buffer if - * configured in HW */ - if (drvdata->tx_ping_pong != 0) { - reg_data = __raw_readl(drvdata->base_addr + - XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - } - /* Enable the Rx interrupts for the first buffer */ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); - /* Enable the Rx interrupts for the second Buffer if - * configured in HW */ - if (drvdata->rx_ping_pong != 0) { - __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + - XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); - } - /* Enable the Global Interrupt Enable */ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); } @@ -206,31 +189,10 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), drvdata->base_addr + XEL_TSR_OFFSET); - /* Disable the Tx interrupts for the second Buffer - * if configured in HW */ - if (drvdata->tx_ping_pong != 0) { - reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - } - /* Disable the Rx interrupts for the first buffer */ reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), drvdata->base_addr + XEL_RSR_OFFSET); - - /* Disable the Rx interrupts for the second buffer - * if configured in HW */ - if (drvdata->rx_ping_pong != 0) { - - reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); - __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); - } } /** -- cgit v0.10.2 From ec21b6b404dd850a23952ee3b871ff676c0703fa Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Sat, 7 Dec 2013 13:40:49 +0530 Subject: net: emaclite: add barriers to support Xilinx Zynq platform This patch adds barriers at appropriate places to ensure the driver works on Xilinx Zynq ARM-based SoC platform. Signed-off-by: Srikanth Thokala Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index b2850fd..fefb8cd 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -220,6 +220,13 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, *to_u16_ptr++ = *from_u16_ptr++; *to_u16_ptr++ = *from_u16_ptr++; + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); + /* Output a word */ *to_u32_ptr++ = align_buffer; } @@ -235,6 +242,12 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, for (; length > 0; length--) *to_u8_ptr++ = *from_u8_ptr++; + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); *to_u32_ptr = align_buffer; } } -- cgit v0.10.2 From d323e92cc3f4edd943610557c9ea1bb4bb5056e8 Mon Sep 17 00:00:00 2001 From: Changli Gao Date: Sun, 8 Dec 2013 09:36:56 -0500 Subject: net: drop_monitor: fix the value of maxattr maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by: David S. Miller diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 9589718..e70301e 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -64,7 +64,6 @@ static struct genl_family net_drop_monitor_family = { .hdrsize = 0, .name = "NET_DM", .version = 2, - .maxattr = NET_DM_CMD_MAX, }; static DEFINE_PER_CPU(struct per_cpu_dm_data, dm_cpu_data); -- cgit v0.10.2 From e696c68363740d3a8fe495e353de3ff26b86257a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 7 Dec 2013 07:13:56 -0800 Subject: Input: serio - fix sysfs layout Restore previous layout of sysfs attributes that was broken by commit 3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of dev_attrs) which moved all serio device attributes into 'id' group, when only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the rest of attributes should be attached directly to the device. Reported-by: Thomas Hellstrom Tested-by: Thomas Hellstrom Acked-by: Greg Kroah-Hartman Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 98707fb..8f4c4ab 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -455,16 +455,26 @@ static DEVICE_ATTR_RO(type); static DEVICE_ATTR_RO(proto); static DEVICE_ATTR_RO(id); static DEVICE_ATTR_RO(extra); -static DEVICE_ATTR_RO(modalias); -static DEVICE_ATTR_WO(drvctl); -static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL); -static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode); static struct attribute *serio_device_id_attrs[] = { &dev_attr_type.attr, &dev_attr_proto.attr, &dev_attr_id.attr, &dev_attr_extra.attr, + NULL +}; + +static struct attribute_group serio_id_attr_group = { + .name = "id", + .attrs = serio_device_id_attrs, +}; + +static DEVICE_ATTR_RO(modalias); +static DEVICE_ATTR_WO(drvctl); +static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL); +static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode); + +static struct attribute *serio_device_attrs[] = { &dev_attr_modalias.attr, &dev_attr_description.attr, &dev_attr_drvctl.attr, @@ -472,13 +482,13 @@ static struct attribute *serio_device_id_attrs[] = { NULL }; -static struct attribute_group serio_id_attr_group = { - .name = "id", - .attrs = serio_device_id_attrs, +static struct attribute_group serio_device_attr_group = { + .attrs = serio_device_attrs, }; static const struct attribute_group *serio_device_attr_groups[] = { &serio_id_attr_group, + &serio_device_attr_group, NULL }; -- cgit v0.10.2 From 241ecf1ce528804d5ffc8fb386ff2a01b1f937c4 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Dec 2013 22:13:10 -0800 Subject: Input: adxl34x - Fix bug in definition of ADXL346_2D_ORIENT Coverity report pointet out by Dmitry Reported-by: Dmitry Torokhov Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c index 0735de3..1cb1da2 100644 --- a/drivers/input/misc/adxl34x.c +++ b/drivers/input/misc/adxl34x.c @@ -158,7 +158,7 @@ /* ORIENT ADXL346 only */ #define ADXL346_2D_VALID (1 << 6) -#define ADXL346_2D_ORIENT(x) (((x) & 0x3) >> 4) +#define ADXL346_2D_ORIENT(x) (((x) & 0x30) >> 4) #define ADXL346_3D_VALID (1 << 3) #define ADXL346_3D_ORIENT(x) ((x) & 0x7) #define ADXL346_2D_PORTRAIT_POS 0 /* +X */ -- cgit v0.10.2 From ad071acb53110c8efd26ff1e5b5d57449b43833b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 9 Dec 2013 10:37:24 +0000 Subject: drm/i915: Repeat eviction search after idling the GPU With the advent of hw context support, we gained some objects that are pinned for the duration of their request. That is we can make aperture space available by idling the GPU and in the process performing a context switch back to the always-pinned default context. As such, we should not conclude that there is no space in the aperture for the current object until we have unpinned any such context objects. Note that we also have the problem of outstanding pageflips preventing eviction of their framebuffer objects to resolve. Testcase: igt/gem_ctx_exec/eviction Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72507 Signed-off-by: Chris Wilson Tested-by: lu hua Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c index b737653..8f3adc7 100644 --- a/drivers/gpu/drm/i915/i915_gem_evict.c +++ b/drivers/gpu/drm/i915/i915_gem_evict.c @@ -88,6 +88,7 @@ i915_gem_evict_something(struct drm_device *dev, struct i915_address_space *vm, } else drm_mm_init_scan(&vm->mm, min_size, alignment, cache_level); +search_again: /* First see if there is a large enough contiguous idle region... */ list_for_each_entry(vma, &vm->inactive_list, mm_list) { if (mark_free(vma, &unwind_list)) @@ -115,10 +116,17 @@ none: list_del_init(&vma->exec_list); } - /* We expect the caller to unpin, evict all and try again, or give up. - * So calling i915_gem_evict_vm() is unnecessary. + /* Can we unpin some objects such as idle hw contents, + * or pending flips? */ - return -ENOSPC; + ret = nonblocking ? -ENOSPC : i915_gpu_idle(dev); + if (ret) + return ret; + + /* Only idle the GPU and repeat the search once */ + i915_gem_retire_requests(dev); + nonblocking = true; + goto search_again; found: /* drm_mm doesn't allow any other other operations while -- cgit v0.10.2 From a5e3d743cb6ed2d73546eaf070138202c0c64a6f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 4 Dec 2013 15:14:05 +0100 Subject: [media] vb2: regression fix: always set length field. Commit dc77523c5da5513df1bbc74db2a522a94f4cec0e ensured that m.offset is only set for the MMAP memory mode by calling __setup_offsets only for that mode. However, __setup_offsets also initializes the length fields, and that should be done regardless of the memory mode. Because of that change the v4l2-ctl test application fails for the USERPTR mode. This fix creates a __setup_lengths function that sets the length, and __setup_offsets just sets the offset and no longer touches the length. Signed-off-by: Hans Verkuil Acked-by: Marek Szyprowski diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 57ba131..0edc165 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -145,6 +145,25 @@ static void __vb2_buf_dmabuf_put(struct vb2_buffer *vb) } /** + * __setup_lengths() - setup initial lengths for every plane in + * every buffer on the queue + */ +static void __setup_lengths(struct vb2_queue *q, unsigned int n) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + + for (buffer = q->num_buffers; buffer < q->num_buffers + n; ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + for (plane = 0; plane < vb->num_planes; ++plane) + vb->v4l2_planes[plane].length = q->plane_sizes[plane]; + } +} + +/** * __setup_offsets() - setup unique offsets ("cookies") for every plane in * every buffer on the queue */ @@ -169,7 +188,6 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) continue; for (plane = 0; plane < vb->num_planes; ++plane) { - vb->v4l2_planes[plane].length = q->plane_sizes[plane]; vb->v4l2_planes[plane].m.mem_offset = off; dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", @@ -241,6 +259,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory, q->bufs[q->num_buffers + buffer] = vb; } + __setup_lengths(q, buffer); if (memory == V4L2_MEMORY_MMAP) __setup_offsets(q, buffer); -- cgit v0.10.2 From 64c832a4f79542809d6c10b8ec6225ff8b76092e Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Wed, 20 Nov 2013 18:02:52 -0300 Subject: [media] videobuf2-dma-sg: fix possible memory leak Fix the return when 'buf->pages' allocation error. Signed-off-by: Geyslan G. Bem Signed-off-by: Hans Verkuil diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c index 2f86054..0d3a8ff 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c @@ -178,7 +178,7 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr, buf->pages = kzalloc(buf->num_pages * sizeof(struct page *), GFP_KERNEL); if (!buf->pages) - return NULL; + goto userptr_fail_alloc_pages; num_pages_from_user = get_user_pages(current, current->mm, vaddr & PAGE_MASK, @@ -204,6 +204,7 @@ userptr_fail_get_user_pages: while (--num_pages_from_user >= 0) put_page(buf->pages[num_pages_from_user]); kfree(buf->pages); +userptr_fail_alloc_pages: kfree(buf); return NULL; } -- cgit v0.10.2 From b96fa8f0f4e09eacf16535af66d74ff92fe7de73 Mon Sep 17 00:00:00 2001 From: Eunbong Song Date: Wed, 27 Nov 2013 00:49:37 +0000 Subject: avr32: Kill CONFIG_MTD_PARTITIONS This patch removes CONFIG_MTD_PARTITIONS in config files for avr32. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: Eunbong Song Acked-by: Hans-Christian Egtvedt diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index d5aff36..4733e38 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index 4abcf43..1be0ee3 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index 18f3fa0..796e536 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -60,7 +60,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig index 06e389c..9a57da4 100644 --- a/arch/avr32/configs/atngw100_mrmt_defconfig +++ b/arch/avr32/configs/atngw100_mrmt_defconfig @@ -48,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig index 2518a13..97fe1b3 100644 --- a/arch/avr32/configs/atngw100mkii_defconfig +++ b/arch/avr32/configs/atngw100mkii_defconfig @@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig index 245ef6b..a176d24 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig @@ -62,7 +62,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig index fa6cbac..d1bf6dcf 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig @@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index bbd5131..2813dd2 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -53,7 +53,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index c1cd726..f8ff3a3 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 754ae56..992228e 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 58589d8..b8e698b 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index c90fbf6..07bed3f 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index ba7c31e..18db853 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig index 65de443..91df6b2 100644 --- a/arch/avr32/configs/merisc_defconfig +++ b/arch/avr32/configs/merisc_defconfig @@ -46,7 +46,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig index 0a8bfdc..d630e08 100644 --- a/arch/avr32/configs/mimc200_defconfig +++ b/arch/avr32/configs/mimc200_defconfig @@ -49,7 +49,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -- cgit v0.10.2 From e6a7906cbfe6f4a793ff427e065ccbb494d65d7b Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Wed, 4 Dec 2013 17:52:55 +0100 Subject: avr32: pm: Fix section mismatch The power management has a section mismatch which leads to the following warning during compilation: WARNING: arch/avr32/mach-at32ap/built-in.o(.text+0x16d4): Section mismatch in reference from the function avr32_pm_offset() to the function .init.text:pm_exception() The function avr32_pm_offset() references the function __init pm_exception(). Signed-off-by: Matthias Brugger Acked-by: Hans-Christian Egtvedt diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c index 32d680e..db19084 100644 --- a/arch/avr32/mach-at32ap/pm.c +++ b/arch/avr32/mach-at32ap/pm.c @@ -181,7 +181,7 @@ static const struct platform_suspend_ops avr32_pm_ops = { .enter = avr32_pm_enter, }; -static unsigned long avr32_pm_offset(void *symbol) +static unsigned long __init avr32_pm_offset(void *symbol) { extern u8 pm_exception[]; -- cgit v0.10.2 From fa1513f60a370a38512ccad4da11548f236768c4 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Thu, 5 Dec 2013 10:59:57 +0100 Subject: cpufreq_ at32ap-cpufreq.c: Fix section mismatch The function at32_cpufreq_driver_init was marked as __init but will be called from inside the cpufreq framework. This lead to the following a section mismatch during compilation: WARNING: drivers/built-in.o(.data+0x2448): Section mismatch in reference from the variable at32_driver to the function .init.text:at32_cpufreq_driver_init() The variable at32_driver references the function __init at32_cpufreq_driver_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Matthias Brugger diff --git a/drivers/cpufreq/at32ap-cpufreq.c b/drivers/cpufreq/at32ap-cpufreq.c index 856ad80..7c03dd8 100644 --- a/drivers/cpufreq/at32ap-cpufreq.c +++ b/drivers/cpufreq/at32ap-cpufreq.c @@ -58,7 +58,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) return 0; } -static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy) +static int at32_cpufreq_driver_init(struct cpufreq_policy *policy) { unsigned int frequency, rate, min_freq; int retval, steps, i; -- cgit v0.10.2 From 7155530d9eb692994d208836e4965da06b17c99d Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Mon, 9 Dec 2013 06:16:51 +0100 Subject: avr32: remove deprecated IRQF_DISABLED This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Acked-by: Hans-Christian Egtvedt diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 12f828a..d0f771b 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -59,7 +59,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction timer_irqaction = { .handler = timer_interrupt, /* Oprofile uses the same irq as the timer, so allow it to be shared */ - .flags = IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED, + .flags = IRQF_TIMER | IRQF_SHARED, .name = "avr32_comparator", }; -- cgit v0.10.2 From 464b500e37a588be69ed9c9c21bca62a578ca66c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 9 Dec 2013 18:35:24 -0800 Subject: avr32: favr-32: clk_round_rate() can return a zero upon error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Treat both negative and zero return values from clk_round_rate() as errors. This is needed since subsequent patches will convert clk_round_rate()'s return value to be an unsigned type, rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Eventually, when calling clk_round_rate(), only a return value of zero will be considered a error. All other values will be considered valid rates. The comparison against values less than 0 is kept to preserve the correct behavior in the meantime. Signed-off-by: Paul Walmsley Cc: Nicolas Ferre Cc: Håvard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Hans-Christian Egtvedt diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 7b1f2cd..1f12149 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -298,8 +298,10 @@ static int __init set_abdac_rate(struct platform_device *pdev) */ retval = clk_round_rate(pll1, CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16); - if (retval < 0) + if (retval <= 0) { + retval = -EINVAL; goto out_abdac; + } retval = clk_set_rate(pll1, retval); if (retval != 0) -- cgit v0.10.2 From 9539210e17dc09ea1472076c297d461c7507a5bb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 19 Nov 2013 13:26:17 -0800 Subject: watchdog: Drop unnecessary include of miscdevice.h After commit 487722cf2 (watchdog: Get rid of MODULE_ALIAS_MISCDEV statements) the affected drivers no longer need to include miscdevice.h. Only exception is rt2880_wdt.c which never needed it. Signed-off-by: Guenter Roeck Reviewed-by: Jean Delvare Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c index a6a2ceb..cafa973 100644 --- a/drivers/watchdog/bcm2835_wdt.c +++ b/drivers/watchdog/bcm2835_wdt.c @@ -19,7 +19,6 @@ #include #include #include -#include #define PM_RSTC 0x1c #define PM_WDOG 0x24 diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 833e813..d1d07f2 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/drivers/watchdog/ie6xx_wdt.c b/drivers/watchdog/ie6xx_wdt.c index 70a2402..07f88f5 100644 --- a/drivers/watchdog/ie6xx_wdt.c +++ b/drivers/watchdog/ie6xx_wdt.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c index 2de486a..3aa50cf 100644 --- a/drivers/watchdog/jz4740_wdt.c +++ b/drivers/watchdog/jz4740_wdt.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c index a1a3638..20dc738 100644 --- a/drivers/watchdog/kempld_wdt.c +++ b/drivers/watchdog/kempld_wdt.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c index 6d4f399..bdb3f4a 100644 --- a/drivers/watchdog/max63xx_wdt.c +++ b/drivers/watchdog/max63xx_wdt.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index 44edca6..f7722a4 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 1bdcc31..5bec20f 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c index 53d37fe..d92c2d5 100644 --- a/drivers/watchdog/rt2880_wdt.c +++ b/drivers/watchdog/rt2880_wdt.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index f9b8e06..af3528f 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index ef2638f..c04a1aa 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/stmp3xxx_rtc_wdt.c b/drivers/watchdog/stmp3xxx_rtc_wdt.c index d667f6b..bb64ae3 100644 --- a/drivers/watchdog/stmp3xxx_rtc_wdt.c +++ b/drivers/watchdog/stmp3xxx_rtc_wdt.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 0fd0e8a..6a447e3 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c index e029b57..5aed9d7 100644 --- a/drivers/watchdog/ux500_wdt.c +++ b/drivers/watchdog/ux500_wdt.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From dace8bbfccfd9e4fcccfffcfbd82881fda3e756f Mon Sep 17 00:00:00 2001 From: Alan Date: Wed, 4 Dec 2013 15:31:52 +0000 Subject: sc1200_wdt: Fix oops If loaded with isapnp = 0 the driver explodes. This is catching people out now and then. What should happen in the working case is a complete mystery and the code appears terminally confused, but we can at least make the error path work properly. Signed-off-by: Alan Cox Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991 diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 3b9fff9..131193a 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -409,8 +409,9 @@ static int __init sc1200wdt_init(void) #if defined CONFIG_PNP /* now that the user has specified an IO port and we haven't detected * any devices, disable pnp support */ + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); isapnp = 0; - pnp_unregister_driver(&scl200wdt_pnp_driver); #endif if (!request_region(io, io_len, SC1200_MODULE_NAME)) { -- cgit v0.10.2 From 6c6eb4270c209cd3b46e4f0bb6b6480b53398111 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Tue, 10 Dec 2013 15:57:20 +0800 Subject: ALSA: hda - A Dell headset detection quirk On the Dell Optiplex 3030 machine (codec Subsystem Id: 0x10280623), no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/hwe-somerville/+bug/1259435 CC: David Henningsson Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f27272a..d46dc3e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5042,6 +5042,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE), SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), -- cgit v0.10.2 From 0dfb9809e93b60946d1915b554138eb93595860c Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Tue, 10 Dec 2013 15:57:21 +0800 Subject: ALSA: hda - Another Dell headset detection quirk On the Dell Inspiron 3045 machine (codec Subsystem Id: 0x10280628), no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/hwe-somerville/+bug/1259437 CC: David Henningsson Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d46dc3e..adba518 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5045,6 +5045,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0628, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A_CHMAP), SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_CHMAP), -- cgit v0.10.2 From 3eae49ca8954f958b2001ab5643ef302cb7b67c7 Mon Sep 17 00:00:00 2001 From: cpw Date: Tue, 3 Dec 2013 17:15:30 -0600 Subject: x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used The SGI UV tlb shootdown code panics the system with a NULL pointer deference if 'nobau' is specified on the boot commandline. uv_flush_tlb_other() gets called for every flush, whether the BAU is disabled or not. It should not be keeping the s_enters statistic while the BAU is disabled. The panic occurs because during initialization init_per_cpu_tunables() does not set the bcp->statp pointer if 'nobau' was specified. Signed-off-by: Cliff Wickman Cc: # 3.12.x Link: http://lkml.kernel.org/r/E1VnzBi-0005yF-MU@eag09.americas.sgi.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 0f92173..efe4d72 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1070,12 +1070,13 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, unsigned long status; bcp = &per_cpu(bau_control, cpu); - stat = bcp->statp; - stat->s_enters++; if (bcp->nobau) return cpumask; + stat = bcp->statp; + stat->s_enters++; + if (bcp->busy) { descriptor_status = read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_0); -- cgit v0.10.2 From f2fa75cdf8b1e1c44353747a156ec25c7478c07a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 10 Dec 2013 09:43:09 +0100 Subject: MAINTAINERS: update GPIO maintainers entry Add Alexandre Courbot as co-maintainer of the GPIO subsystem. Provide a pointer to the GPIO GIT tree. Update the documentation file path. Move around to put people and git tree on top. Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij diff --git a/MAINTAINERS b/MAINTAINERS index 13c15c8..7e053e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3765,9 +3765,11 @@ F: include/uapi/linux/gigaset_dev.h GPIO SUBSYSTEM M: Linus Walleij -S: Maintained +M: Alexandre Courbot L: linux-gpio@vger.kernel.org -F: Documentation/gpio.txt +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git +S: Maintained +F: Documentation/gpio/ F: drivers/gpio/ F: include/linux/gpio* F: include/asm-generic/gpio.h -- cgit v0.10.2 From 8620f394c4f9abd13e4fdf927d9c2bbeda74cde7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 26 Nov 2013 02:45:34 +0100 Subject: sh-pfc: Fix PINMUX_GPIO macro Commit 7cbb0e55e27e ("sh-pfc: Don't duplicate argument to PINMUX_GPIO macro") erronesouly modified the PINMUX_GPIO macro in a way that resulted in all pins being named "name". Fix the macro to name the pins correctly. Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h index 11bd0d9..e214295 100644 --- a/drivers/pinctrl/sh-pfc/sh_pfc.h +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h @@ -254,7 +254,7 @@ struct sh_pfc_soc_info { #define PINMUX_GPIO(_pin) \ [GPIO_##_pin] = { \ .pin = (u16)-1, \ - .name = __stringify(name), \ + .name = __stringify(GPIO_##_pin), \ .enum_id = _pin##_DATA, \ } -- cgit v0.10.2 From f5837ec11f8cfa6d53ebc5806582771b2c9988c6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 5 Dec 2013 11:23:35 +0200 Subject: gpio: twl4030: Fix regression for twl gpio LED output Commit 0b2aa8be introduced a regression that causes failure in setting LED GPO direction to OUT. This causes USB host probe failures for Beagleboard C4. platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral hsusb2_vcc: Failed to request enable GPIO510: -22 reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -22 reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with error -22 direction_out/direction_in must return 0 if the operation succeeded. Also, don't update direction flag and output data if twl4030_set_gpio_direction() failed inside twl_direction_out(); Cc: stable@vger.kernel.org Signed-off-by: Roger Quadros Acked-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index b97d6a6..f999689 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -300,7 +300,7 @@ static int twl_direction_in(struct gpio_chip *chip, unsigned offset) if (offset < TWL4030_GPIO_MAX) ret = twl4030_set_gpio_direction(offset, 1); else - ret = -EINVAL; + ret = -EINVAL; /* LED outputs can't be set as input */ if (!ret) priv->direction &= ~BIT(offset); @@ -354,11 +354,20 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value) static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip); - int ret = -EINVAL; + int ret = 0; mutex_lock(&priv->mutex); - if (offset < TWL4030_GPIO_MAX) + if (offset < TWL4030_GPIO_MAX) { ret = twl4030_set_gpio_direction(offset, 0); + if (ret) { + mutex_unlock(&priv->mutex); + return ret; + } + } + + /* + * LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output + */ priv->direction |= BIT(offset); mutex_unlock(&priv->mutex); -- cgit v0.10.2 From 932e9dec380c67ec15ac3eb073bb55797d8b4801 Mon Sep 17 00:00:00 2001 From: Stefano Panella Date: Tue, 10 Dec 2013 14:20:28 +0000 Subject: ALSA: memalloc.h - fix wrong truncation of dma_addr_t When running a 32bit kernel the hda_intel driver is still reporting a 64bit dma_mask if the HW supports it. From sound/pci/hda/hda_intel.c: /* allow 64bit DMA address if supported by H/W */ if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); else { pci_set_dma_mask(pci, DMA_BIT_MASK(32)); pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)); } which means when there is a call to dma_alloc_coherent from snd_malloc_dev_pages a machine address bigger than 32bit can be returned. This can be true in particular if running the 32bit kernel as a pv dom0 under the Xen Hypervisor or PAE on bare metal. The problem is that when calling setup_bdle to program the BLE the dma_addr_t returned from the dma_alloc_coherent is wrongly truncated from snd_sgbuf_get_addr if running a 32bit kernel: static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab, size_t offset) { struct snd_sg_buf *sgbuf = dmab->private_data; dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr; addr &= PAGE_MASK; return addr + offset % PAGE_SIZE; } where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr. Without this patch the HW will fetch the 32bit truncated address, which is not the one obtained from dma_alloc_coherent and will result to a non working audio but can corrupt host memory at a random location. The current patch apply to v3.13-rc3-74-g6c843f5 Signed-off-by: Stefano Panella Reviewed-by: Frediano Ziglio Cc: Signed-off-by: Takashi Iwai diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h index af99839..5f73785 100644 --- a/include/sound/memalloc.h +++ b/include/sound/memalloc.h @@ -108,7 +108,7 @@ static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab, { struct snd_sg_buf *sgbuf = dmab->private_data; dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr; - addr &= PAGE_MASK; + addr &= ~((dma_addr_t)PAGE_SIZE - 1); return addr + offset % PAGE_SIZE; } -- cgit v0.10.2 From 6733cf572a9e20db2b7580a5dd39d5782d571eec Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Dec 2013 12:15:52 +0100 Subject: ALSA: compress: Fix 64bit ABI incompatibility snd_pcm_uframes_t is defined as unsigned long so it would take different sizes depending on 32 or 64bit architectures. As we don't want this ABI incompatibility, and there is no real 64bit user yet, let's make it the fixed size with __u32. Also bump the protocol version number to 0.1.2. Acked-by: Vinod Koul Cc: Signed-off-by: Takashi Iwai diff --git a/include/uapi/sound/compress_offload.h b/include/uapi/sound/compress_offload.h index d630163..5759810 100644 --- a/include/uapi/sound/compress_offload.h +++ b/include/uapi/sound/compress_offload.h @@ -30,7 +30,7 @@ #include -#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 1) +#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 2) /** * struct snd_compressed_buffer: compressed buffer * @fragment_size: size of buffer fragment in bytes @@ -67,8 +67,8 @@ struct snd_compr_params { struct snd_compr_tstamp { __u32 byte_offset; __u32 copied_total; - snd_pcm_uframes_t pcm_frames; - snd_pcm_uframes_t pcm_io_frames; + __u32 pcm_frames; + __u32 pcm_io_frames; __u32 sampling_rate; }; -- cgit v0.10.2 From 31978b5cc66b8ba8a7e8eef60b12395d41b7b890 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 31 Oct 2013 21:00:10 +0300 Subject: xfs: underflow bug in xfs_attrlist_by_handle() If we allocate less than sizeof(struct attrlist) then we end up corrupting memory or doing a ZERO_PTR_SIZE dereference. This can only be triggered with CAP_SYS_ADMIN. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Signed-off-by: Dan Carpenter Reviewed-by: Dave Chinner Signed-off-by: Ben Myers (cherry picked from commit 071c529eb672648ee8ca3f90944bcbcc730b4c06) diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index 4d61340..33ad9a7 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -442,7 +442,8 @@ xfs_attrlist_by_handle( return -XFS_ERROR(EPERM); if (copy_from_user(&al_hreq, arg, sizeof(xfs_fsop_attrlist_handlereq_t))) return -XFS_ERROR(EFAULT); - if (al_hreq.buflen > XATTR_LIST_MAX) + if (al_hreq.buflen < sizeof(struct attrlist) || + al_hreq.buflen > XATTR_LIST_MAX) return -XFS_ERROR(EINVAL); /* diff --git a/fs/xfs/xfs_ioctl32.c b/fs/xfs/xfs_ioctl32.c index e8fb123..a7992f8 100644 --- a/fs/xfs/xfs_ioctl32.c +++ b/fs/xfs/xfs_ioctl32.c @@ -356,7 +356,8 @@ xfs_compat_attrlist_by_handle( if (copy_from_user(&al_hreq, arg, sizeof(compat_xfs_fsop_attrlist_handlereq_t))) return -XFS_ERROR(EFAULT); - if (al_hreq.buflen > XATTR_LIST_MAX) + if (al_hreq.buflen < sizeof(struct attrlist) || + al_hreq.buflen > XATTR_LIST_MAX) return -XFS_ERROR(EINVAL); /* -- cgit v0.10.2 From 2f42d612e7d4c4fb1819ea7b2b6e18938714ae7a Mon Sep 17 00:00:00 2001 From: Jie Liu Date: Wed, 20 Nov 2013 16:08:53 +0800 Subject: xfs: don't perform discard if the given range length is less than block size For discard operation, we should return EINVAL if the given range length is less than a block size, otherwise it will go through the file system to discard data blocks as the end range might be evaluated to -1, e.g, # fstrim -v -o 0 -l 100 /xfs7 /xfs7: 9811378176 bytes were trimmed This issue can be triggered via xfstests/generic/288. Also, it seems to get the request queue pointer via bdev_get_queue() instead of the hard code pointer dereference is not a bad thing. Signed-off-by: Jie Liu Reviewed-by: Christoph Hellwig Signed-off-by: Ben Myers (cherry picked from commit f9fd0135610084abef6867d984e9951c3099950d) diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c index 8367d6d..4f11ef0 100644 --- a/fs/xfs/xfs_discard.c +++ b/fs/xfs/xfs_discard.c @@ -157,7 +157,7 @@ xfs_ioc_trim( struct xfs_mount *mp, struct fstrim_range __user *urange) { - struct request_queue *q = mp->m_ddev_targp->bt_bdev->bd_disk->queue; + struct request_queue *q = bdev_get_queue(mp->m_ddev_targp->bt_bdev); unsigned int granularity = q->limits.discard_granularity; struct fstrim_range range; xfs_daddr_t start, end, minlen; @@ -180,7 +180,8 @@ xfs_ioc_trim( * matter as trimming blocks is an advisory interface. */ if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) || - range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp))) + range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp)) || + range.len < mp->m_sb.sb_blocksize) return -XFS_ERROR(EINVAL); start = BTOBB(range.start); -- cgit v0.10.2 From f94c44573e7c22860e2c3dfe349c45f72ba35ad3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 21 Nov 2013 15:41:06 +1100 Subject: xfs: growfs overruns AGFL buffer on V4 filesystems This loop in xfs_growfs_data_private() is incorrect for V4 superblocks filesystems: for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++) agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK); For V4 filesystems, we don't have a agfl header structure, and so XFS_AGFL_SIZE() returns an entire sector's worth of entries, which we then index from an offset into the sector. Hence: buffer overrun. This problem was introduced in 3.10 by commit 77c95bba ("xfs: add CRC checks to the AGFL") which changed the AGFL structure but failed to update the growfs code to handle the different structures. Fix it by using the correct offset into the buffer for both V4 and V5 filesystems. Cc: Signed-off-by: Dave Chinner Reviewed-by: Jie Liu Signed-off-by: Ben Myers (cherry picked from commit b7d961b35b3ab69609aeea93f870269cb6e7ba4d) diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index a6e54b3..02fb943 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -220,6 +220,8 @@ xfs_growfs_data_private( */ nfree = 0; for (agno = nagcount - 1; agno >= oagcount; agno--, new -= agsize) { + __be32 *agfl_bno; + /* * AG freespace header block */ @@ -279,8 +281,10 @@ xfs_growfs_data_private( agfl->agfl_seqno = cpu_to_be32(agno); uuid_copy(&agfl->agfl_uuid, &mp->m_sb.sb_uuid); } + + agfl_bno = XFS_BUF_TO_AGFL_BNO(mp, bp); for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++) - agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK); + agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK); error = xfs_bwrite(bp); xfs_buf_relse(bp); -- cgit v0.10.2 From f5c33b070de3fdb8ad995b767ad0e3487cf0d242 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 3 Dec 2013 19:39:13 -0600 Subject: ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected Due to the cross dependencies between hwmod for automanaged device information for OMAP and dts node definitions, we can run into scenarios where the dts node is defined, however it's hwmod entry is yet to be added. In these cases: a) omap_device does not register a pm_domain (since it cannot find hwmod entry). b) driver does not know about (a), does a pm_runtime_get_sync which never fails c) It then tries to do some operation on the device (such as read the revision register (as part of probe) without clock or adequate OMAP generic PM operation performed for enabling the module. This causes a crash such as that reported in: https://bugzilla.kernel.org/show_bug.cgi?id=66441 When 'ti,hwmod' is provided in dt node, it is expected that the device will not function without the OMAP's power automanagement. Hence, when we hit a fail condition (due to hwmod entries not present or other similar scenario), fail at pm_domain level due to lack of data, provide enough information for it to be fixed, however, it allows for the driver to take appropriate measures to prevent crash. Reported-by: Tobias Jakobi Signed-off-by: Nishanth Menon Acked-by: Kevin Hilman Acked-by: Tony Lindgren Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 53f0735..e0a398c 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev) odbfd_exit1: kfree(hwmods); odbfd_exit: + /* if data/we are at fault.. load up a fail handler */ + if (ret) + pdev->dev.pm_domain = &omap_device_fail_pm_domain; + return ret; } @@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev) return pm_generic_runtime_resume(dev); } + +static int _od_fail_runtime_suspend(struct device *dev) +{ + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__); + return -ENODEV; +} + +static int _od_fail_runtime_resume(struct device *dev) +{ + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__); + return -ENODEV; +} + #endif #ifdef CONFIG_SUSPEND @@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev) #define _od_resume_noirq NULL #endif +struct dev_pm_domain omap_device_fail_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend, + _od_fail_runtime_resume, NULL) + } +}; + struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 17ca1ae..78c02b3 100644 --- a/arch/arm/mach-omap2/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -29,6 +29,7 @@ #include "omap_hwmod.h" extern struct dev_pm_domain omap_device_pm_domain; +extern struct dev_pm_domain omap_device_fail_pm_domain; /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 -- cgit v0.10.2 From 7cfe5b3310a1b45f385ff18647bddb487a6c5525 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 10 Dec 2013 17:42:50 +1030 Subject: Ignore generated file kernel/x509_certificate_list $ git status # On branch pending-rebases # Untracked files: # (use "git add ..." to include in what will be committed) # # kernel/x509_certificate_list nothing added to commit but untracked files present (use "git add" to track) $ Signed-off-by: Rusty Russell Signed-off-by: David Howells diff --git a/kernel/.gitignore b/kernel/.gitignore index b3097bd..790d83c 100644 --- a/kernel/.gitignore +++ b/kernel/.gitignore @@ -5,3 +5,4 @@ config_data.h config_data.gz timeconst.h hz.bc +x509_certificate_list -- cgit v0.10.2 From 62226983da070f7e51068ec2e3a4da34672964c7 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Thu, 5 Dec 2013 14:48:22 +0100 Subject: KEYS: correct alignment of system_certificate_list content in assembly file Apart from data-type specific alignment constraints, there are also architecture-specific alignment requirements. For example, on s390 symbols must be on even addresses implying a 2-byte alignment. If the system_certificate_list_end symbol is on an odd address and if this address is loaded, the least-significant bit is ignored. As a result, the load_system_certificate_list() fails to load the certificates because of a wrong certificate length calculation. To be safe, align system_certificate_list on an 8-byte boundary. Also improve the length calculation of the system_certificate_list content. Introduce a system_certificate_list_size (8-byte aligned because of unsigned long) variable that stores the length. Let the linker calculate this size by introducing a start and end label for the certificate content. Signed-off-by: Hendrik Brueckner Signed-off-by: David Howells diff --git a/kernel/system_certificates.S b/kernel/system_certificates.S index 4aef390..3e9868d47 100644 --- a/kernel/system_certificates.S +++ b/kernel/system_certificates.S @@ -3,8 +3,18 @@ __INITRODATA + .align 8 .globl VMLINUX_SYMBOL(system_certificate_list) VMLINUX_SYMBOL(system_certificate_list): +__cert_list_start: .incbin "kernel/x509_certificate_list" - .globl VMLINUX_SYMBOL(system_certificate_list_end) -VMLINUX_SYMBOL(system_certificate_list_end): +__cert_list_end: + + .align 8 + .globl VMLINUX_SYMBOL(system_certificate_list_size) +VMLINUX_SYMBOL(system_certificate_list_size): +#ifdef CONFIG_64BIT + .quad __cert_list_end - __cert_list_start +#else + .long __cert_list_end - __cert_list_start +#endif diff --git a/kernel/system_keyring.c b/kernel/system_keyring.c index 564dd93..52ebc70 100644 --- a/kernel/system_keyring.c +++ b/kernel/system_keyring.c @@ -22,7 +22,7 @@ struct key *system_trusted_keyring; EXPORT_SYMBOL_GPL(system_trusted_keyring); extern __initconst const u8 system_certificate_list[]; -extern __initconst const u8 system_certificate_list_end[]; +extern __initconst const unsigned long system_certificate_list_size; /* * Load the compiled-in keys @@ -60,8 +60,8 @@ static __init int load_system_certificate_list(void) pr_notice("Loading compiled-in X.509 certificates\n"); - end = system_certificate_list_end; p = system_certificate_list; + end = p + system_certificate_list_size; while (p < end) { /* Each cert begins with an ASN.1 SEQUENCE tag and must be more * than 256 bytes in size. -- cgit v0.10.2 From 09ca27579ee5a1b6f537b82165080b85c1febac8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 20 Nov 2013 10:15:11 +0800 Subject: clocksource: time-efm32: Select CLKSRC_MMIO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The time-efm32 driver uses the clocksource MMIO functions. Thus it needs to select CLKSRC_MMIO in Kconfig. Signed-off-by: Axel Lin Signed-off-by: Daniel Lezcano Acked-by: Uwe Kleine-König diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5c07a56..634c4d6 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -75,6 +75,7 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK config CLKSRC_EFM32 bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32 depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST) + select CLKSRC_MMIO default ARCH_EFM32 help Support to use the timers of EFM32 SoCs as clock source and clock -- cgit v0.10.2 From c813eff078588733a3d1a46c033c2d59d66a263b Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 26 Nov 2013 18:20:14 -0300 Subject: clocksource: armada-370-xp: Register sched_clock after the counter reset This commit registers the sched_clock _after_ the counter reset (instead of before). This removes the timestamp 'jump' in kernel log messages. Before this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 163.521419] pid_max: default: 32768 minimum: 301 [ 163.526185] Mount-cache hash table entries: 512 [ 163.531095] CPU: Testing write buffer coherency: ok After this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 0.030820] pid_max: default: 32768 minimum: 301 [ 0.035588] Mount-cache hash table entries: 512 [ 0.040500] CPU: Testing write buffer coherency: ok Signed-off-by: Ezequiel Garcia Signed-off-by: Daniel Lezcano Acked-by: Jason Cooper diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index d8e47e5..4e7f680 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -256,11 +256,6 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np) ticks_per_jiffy = (timer_clk + HZ / 2) / HZ; /* - * Set scale and timer for sched_clock. - */ - sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); - - /* * Setup free-running clocksource timer (interrupts * disabled). */ @@ -270,6 +265,11 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np) timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT)); + /* + * Set scale and timer for sched_clock. + */ + sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); + clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "armada_370_xp_clocksource", timer_clk, 300, 32, clocksource_mmio_readl_down); -- cgit v0.10.2 From 4c4b053235fa73db1ea241aa5a6b021afb0ed8db Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Sat, 19 Oct 2013 00:49:48 +0200 Subject: clocksource: clksrc-of: Do not drop unheld reference on device node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When booting a recent kernel on ARM with OF_DYNAMIC enabled, the kernel warns about the following: [ 0.000000] ERROR: Bad of_node_put() on /timer@50004600 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-next-20131017-00077-gedfd827-dirty #406 [ 0.000000] [] (unwind_backtrace+0x0/0xf4) from [] (show_stack+0x10/0x14) [ 0.000000] [] (show_stack+0x10/0x14) from [] (dump_stack+0x9c/0xc8) [ 0.000000] [] (dump_stack+0x9c/0xc8) from [] (of_node_release+0x90/0x9c) [ 0.000000] [] (of_node_release+0x90/0x9c) from [] (of_find_matching_node_and_match+0x78/0xb4) [ 0.000000] [] (of_find_matching_node_and_match+0x78/0xb4) from [] (clocksource_of_init+0x60/0x70) [ 0.000000] [] (clocksource_of_init+0x60/0x70) from [] (start_kernel+0x1f4/0x33c) [ 0.000000] [] (start_kernel+0x1f4/0x33c) from [<80008074>] (0x80008074) This is caused by clocksource_of_init() dropping a reference on the device node that it never took. The reference taken by the loop is implicitly dropped on subsequent iterations. See the implementation of and the comment on top of the of_find_matching_node_and_match() function for reference (no pun intended). Signed-off-by: Thierry Reding Signed-off-by: Daniel Lezcano Cc: Uwe Kleine-König diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c index 35639cf4..b9ddd9e 100644 --- a/drivers/clocksource/clksrc-of.c +++ b/drivers/clocksource/clksrc-of.c @@ -35,6 +35,5 @@ void __init clocksource_of_init(void) init_func = match->data; init_func(np); - of_node_put(np); } } -- cgit v0.10.2 From 6db50bb67598668c525f12e2f7191f5d03ca46f2 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 2 Dec 2013 09:29:35 +0000 Subject: clocksource: sunxi: Stop timer from ticking before enabling interrupts The sun4i timer can still be ticking when we enable the interrupt. If another timer is actually used (A7 architected timer, for example), odds are that the interrupt will eventually fire with the event_handler pointer being NULL. The obvious fix it to stop the timer before registering the interrupt. Observed and tested on sun7i (cubietruck). Cc: Daniel Lezcano Acked-by: Maxime Ripard Signed-off-by: Marc Zyngier Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index 2fb4695..a4f6119 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -179,6 +179,9 @@ static void __init sun4i_timer_init(struct device_node *node) writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), timer_base + TIMER_CTL_REG(0)); + /* Make sure timer is stopped before playing with interrupts */ + sun4i_clkevt_time_stop(0); + ret = setup_irq(irq, &sun4i_timer_irq); if (ret) pr_warn("failed to setup irq %d\n", irq); -- cgit v0.10.2 From 85dc6ee1237c8a4a7742e6abab96a20389b7d682 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 10 Dec 2013 19:49:18 +0100 Subject: clocksource: dw_apb_timer_of: Fix read_sched_clock The read_sched_clock should return the ~value because the clock is a countdown implementation. read_sched_clock() should be the same as __apbt_read_clocksource(). Signed-off-by: Dinh Nguyen Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index 45ba8ae..b29d7cd 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -108,7 +108,7 @@ static void __init add_clocksource(struct device_node *source_timer) static u64 read_sched_clock(void) { - return __raw_readl(sched_io_base); + return ~__raw_readl(sched_io_base); } static const struct of_device_id sptimer_ids[] __initconst = { -- cgit v0.10.2 From 9ab4727c1d41e50b67aecde4bf11879560a3ca78 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 10 Dec 2013 19:49:18 +0100 Subject: clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer" In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place of "snps,dw-apb-timer". But the driver also needs to be udpated in order to support this new binding "snps,dw-apb-timer". Signed-off-by: Dinh Nguyen Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index b29d7cd..2a2ea27 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -113,7 +113,6 @@ static u64 read_sched_clock(void) static const struct of_device_id sptimer_ids[] __initconst = { { .compatible = "picochip,pc3x2-rtc" }, - { .compatible = "snps,dw-apb-timer-sp" }, { /* Sentinel */ }, }; @@ -151,4 +150,6 @@ static void __init dw_apb_timer_init(struct device_node *timer) num_called++; } CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init); -CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init); +CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init); +CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init); +CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init); -- cgit v0.10.2 From ebb93c057dda376414fbc499ad6ace9b527dff5a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Dec 2013 17:33:49 +0100 Subject: ALSA: hda - Mute all aamix inputs as default Not all channels have been initialized, so far, especially when aamix NID itself doesn't have amps but its leaves have. This patch fixes these holes. Otherwise you might get unexpected loopback inputs, e.g. from surround channels. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index c4671d0..249cd46 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -4297,6 +4297,26 @@ static unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec, return AC_PWRST_D3; } +/* mute all aamix inputs initially; parse up to the first leaves */ +static void mute_all_mixer_nid(struct hda_codec *codec, hda_nid_t mix) +{ + int i, nums; + const hda_nid_t *conn; + bool has_amp; + + nums = snd_hda_get_conn_list(codec, mix, &conn); + has_amp = nid_has_mute(codec, mix, HDA_INPUT); + for (i = 0; i < nums; i++) { + if (has_amp) + snd_hda_codec_amp_stereo(codec, mix, + HDA_INPUT, i, + 0xff, HDA_AMP_MUTE); + else if (nid_has_volume(codec, conn[i], HDA_OUTPUT)) + snd_hda_codec_amp_stereo(codec, conn[i], + HDA_OUTPUT, 0, + 0xff, HDA_AMP_MUTE); + } +} /* * Parse the given BIOS configuration and set up the hda_gen_spec @@ -4435,6 +4455,10 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec, } } + /* mute all aamix input initially */ + if (spec->mixer_nid) + mute_all_mixer_nid(codec, spec->mixer_nid); + dig_only: parse_digital(codec); -- cgit v0.10.2 From 2f5ae4901acc6fdee939718658fa9f59c4f2217b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Oct 2013 15:26:33 +0000 Subject: DRM: Armada: implement lastclose() for fbhelper Call drm_fb_helper_restore_fbdev_mode() upon last close so that in the event of the X server crashing, we have some kind of mode restored. Reviewed-by: Rob Clark Reviewed-by: Thierry Reding Signed-off-by: Russell King diff --git a/drivers/gpu/drm/armada/armada_drm.h b/drivers/gpu/drm/armada/armada_drm.h index eef09ec..a72cae0 100644 --- a/drivers/gpu/drm/armada/armada_drm.h +++ b/drivers/gpu/drm/armada/armada_drm.h @@ -103,6 +103,7 @@ void armada_drm_queue_unref_work(struct drm_device *, extern const struct drm_mode_config_funcs armada_drm_mode_config_funcs; int armada_fbdev_init(struct drm_device *); +void armada_fbdev_lastclose(struct drm_device *); void armada_fbdev_fini(struct drm_device *); int armada_overlay_plane_create(struct drm_device *, unsigned long); diff --git a/drivers/gpu/drm/armada/armada_drv.c b/drivers/gpu/drm/armada/armada_drv.c index 7aede90..15425d2 100644 --- a/drivers/gpu/drm/armada/armada_drv.c +++ b/drivers/gpu/drm/armada/armada_drv.c @@ -321,6 +321,11 @@ static struct drm_ioctl_desc armada_ioctls[] = { DRM_UNLOCKED), }; +static void armada_drm_lastclose(struct drm_device *dev) +{ + armada_fbdev_lastclose(dev); +} + static const struct file_operations armada_drm_fops = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -337,7 +342,7 @@ static struct drm_driver armada_drm_driver = { .open = NULL, .preclose = NULL, .postclose = NULL, - .lastclose = NULL, + .lastclose = armada_drm_lastclose, .unload = armada_drm_unload, .get_vblank_counter = drm_vblank_count, .enable_vblank = armada_drm_enable_vblank, diff --git a/drivers/gpu/drm/armada/armada_fbdev.c b/drivers/gpu/drm/armada/armada_fbdev.c index dd5ea77..743570e 100644 --- a/drivers/gpu/drm/armada/armada_fbdev.c +++ b/drivers/gpu/drm/armada/armada_fbdev.c @@ -177,6 +177,16 @@ int armada_fbdev_init(struct drm_device *dev) return ret; } +void armada_fbdev_lastclose(struct drm_device *dev) +{ + struct armada_private *priv = dev->dev_private; + + drm_modeset_lock_all(dev); + if (priv->fbdev) + drm_fb_helper_restore_fbdev_mode(priv->fbdev); + drm_modeset_unlock_all(dev); +} + void armada_fbdev_fini(struct drm_device *dev) { struct armada_private *priv = dev->dev_private; -- cgit v0.10.2 From 077acbab67a785b5f5ae60e8932fcf6028072359 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Oct 2013 15:35:27 +0000 Subject: DRM: Armada: destroy framebuffer after helper Destroy the framebuffer only after the helper, since the helper may still be referencing the framebufer at this point. Reviewed-by: Rob Clark Reviewed-by: Thierry Reding Signed-off-by: Russell King diff --git a/drivers/gpu/drm/armada/armada_fbdev.c b/drivers/gpu/drm/armada/armada_fbdev.c index 743570e..b348b16 100644 --- a/drivers/gpu/drm/armada/armada_fbdev.c +++ b/drivers/gpu/drm/armada/armada_fbdev.c @@ -202,11 +202,11 @@ void armada_fbdev_fini(struct drm_device *dev) framebuffer_release(info); } + drm_fb_helper_fini(fbh); + if (fbh->fb) fbh->fb->funcs->destroy(fbh->fb); - drm_fb_helper_fini(fbh); - priv->fbdev = NULL; } } -- cgit v0.10.2 From 7513e09596374bb7fbbecfee945fecb5b357c0e9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Nov 2013 15:46:55 +0000 Subject: DRM: Armada: fix printing of phys_addr_t/dma_addr_t These can be 64-bit quantities, so fix them up appropriately. Reviewed-by: Rob Clark Reviewed-by: Thierry Reding Signed-off-by: Russell King diff --git a/drivers/gpu/drm/armada/armada_fbdev.c b/drivers/gpu/drm/armada/armada_fbdev.c index b348b16..948cb14 100644 --- a/drivers/gpu/drm/armada/armada_fbdev.c +++ b/drivers/gpu/drm/armada/armada_fbdev.c @@ -105,9 +105,9 @@ static int armada_fb_create(struct drm_fb_helper *fbh, drm_fb_helper_fill_fix(info, dfb->fb.pitches[0], dfb->fb.depth); drm_fb_helper_fill_var(info, fbh, sizes->fb_width, sizes->fb_height); - DRM_DEBUG_KMS("allocated %dx%d %dbpp fb: 0x%08x\n", - dfb->fb.width, dfb->fb.height, - dfb->fb.bits_per_pixel, obj->phys_addr); + DRM_DEBUG_KMS("allocated %dx%d %dbpp fb: 0x%08llx\n", + dfb->fb.width, dfb->fb.height, dfb->fb.bits_per_pixel, + (unsigned long long)obj->phys_addr); return 0; diff --git a/drivers/gpu/drm/armada/armada_gem.c b/drivers/gpu/drm/armada/armada_gem.c index 9f2356b..adc7c2d 100644 --- a/drivers/gpu/drm/armada/armada_gem.c +++ b/drivers/gpu/drm/armada/armada_gem.c @@ -172,8 +172,9 @@ armada_gem_linear_back(struct drm_device *dev, struct armada_gem_object *obj) obj->dev_addr = obj->linear->start; } - DRM_DEBUG_DRIVER("obj %p phys %#x dev %#x\n", - obj, obj->phys_addr, obj->dev_addr); + DRM_DEBUG_DRIVER("obj %p phys %#llx dev %#llx\n", obj, + (unsigned long long)obj->phys_addr, + (unsigned long long)obj->dev_addr); return 0; } -- cgit v0.10.2 From 5cd5268806435b6476184430b2806db988c903f0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 7 Dec 2013 16:28:39 +0000 Subject: DRM: Armada: prime refcounting bug fix Commit 011c2282c74d changed the way refcounting on imported dma_bufs works, and this hadn't been spotted while forward-porting Armada. Reflect the changes in that commit into the Armada driver. Reviewed-by: Rob Clark Reviewed-by: Thierry Reding Signed-off-by: Russell King diff --git a/drivers/gpu/drm/armada/armada_gem.c b/drivers/gpu/drm/armada/armada_gem.c index adc7c2d..887816f 100644 --- a/drivers/gpu/drm/armada/armada_gem.c +++ b/drivers/gpu/drm/armada/armada_gem.c @@ -558,7 +558,6 @@ armada_gem_prime_import(struct drm_device *dev, struct dma_buf *buf) * refcount on the gem object itself. */ drm_gem_object_reference(obj); - dma_buf_put(buf); return obj; } } @@ -574,6 +573,7 @@ armada_gem_prime_import(struct drm_device *dev, struct dma_buf *buf) } dobj->obj.import_attach = attach; + get_dma_buf(buf); /* * Don't call dma_buf_map_attachment() here - it maps the -- cgit v0.10.2 From 230c83afdd9cd384348475bea1e14b80b3b6b1b8 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 29 Nov 2013 18:13:37 -0500 Subject: dm snapshot: avoid snapshot space leak on crash There is a possible leak of snapshot space in case of crash. The reason for space leaking is that chunks in the snapshot device are allocated sequentially, but they are finished (and stored in the metadata) out of order, depending on the order in which copying finished. For example, supposed that the metadata contains the following records SUPERBLOCK METADATA (blocks 0 ... 250) DATA 0 DATA 1 DATA 2 ... DATA 250 Now suppose that you allocate 10 new data blocks 251-260. Suppose that copying of these blocks finish out of order (block 260 finished first and the block 251 finished last). Now, the snapshot device looks like this: SUPERBLOCK METADATA (blocks 0 ... 250, 260, 259, 258, 257, 256) DATA 0 DATA 1 DATA 2 ... DATA 250 DATA 251 DATA 252 DATA 253 DATA 254 DATA 255 METADATA (blocks 255, 254, 253, 252, 251) DATA 256 DATA 257 DATA 258 DATA 259 DATA 260 Now, if the machine crashes after writing the first metadata block but before writing the second metadata block, the space for areas DATA 250-255 is leaked, it contains no valid data and it will never be used in the future. This patch makes dm-snapshot complete exceptions in the same order they were allocated, thus fixing this bug. Note: when backporting this patch to the stable kernel, change the version field in the following way: * if version in the stable kernel is {1, 11, 1}, change it to {1, 12, 0} * if version in the stable kernel is {1, 10, 0} or {1, 10, 1}, change it to {1, 10, 2} Userspace reads the version to determine if the bug was fixed, so the version change is needed. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index aec57d7..944690b 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -66,6 +66,18 @@ struct dm_snapshot { atomic_t pending_exceptions_count; + /* Protected by "lock" */ + sector_t exception_start_sequence; + + /* Protected by kcopyd single-threaded callback */ + sector_t exception_complete_sequence; + + /* + * A list of pending exceptions that completed out of order. + * Protected by kcopyd single-threaded callback. + */ + struct list_head out_of_order_list; + mempool_t *pending_pool; struct dm_exception_table pending; @@ -173,6 +185,14 @@ struct dm_snap_pending_exception { */ int started; + /* There was copying error. */ + int copy_error; + + /* A sequence number, it is used for in-order completion. */ + sector_t exception_sequence; + + struct list_head out_of_order_entry; + /* * For writing a complete chunk, bypassing the copy. */ @@ -1094,6 +1114,9 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->valid = 1; s->active = 0; atomic_set(&s->pending_exceptions_count, 0); + s->exception_start_sequence = 0; + s->exception_complete_sequence = 0; + INIT_LIST_HEAD(&s->out_of_order_list); init_rwsem(&s->lock); INIT_LIST_HEAD(&s->list); spin_lock_init(&s->pe_lock); @@ -1443,6 +1466,19 @@ static void commit_callback(void *context, int success) pending_complete(pe, success); } +static void complete_exception(struct dm_snap_pending_exception *pe) +{ + struct dm_snapshot *s = pe->snap; + + if (unlikely(pe->copy_error)) + pending_complete(pe, 0); + + else + /* Update the metadata if we are persistent */ + s->store->type->commit_exception(s->store, &pe->e, + commit_callback, pe); +} + /* * Called when the copy I/O has finished. kcopyd actually runs * this code so don't block. @@ -1452,13 +1488,32 @@ static void copy_callback(int read_err, unsigned long write_err, void *context) struct dm_snap_pending_exception *pe = context; struct dm_snapshot *s = pe->snap; - if (read_err || write_err) - pending_complete(pe, 0); + pe->copy_error = read_err || write_err; - else - /* Update the metadata if we are persistent */ - s->store->type->commit_exception(s->store, &pe->e, - commit_callback, pe); + if (pe->exception_sequence == s->exception_complete_sequence) { + s->exception_complete_sequence++; + complete_exception(pe); + + while (!list_empty(&s->out_of_order_list)) { + pe = list_entry(s->out_of_order_list.next, + struct dm_snap_pending_exception, out_of_order_entry); + if (pe->exception_sequence != s->exception_complete_sequence) + break; + s->exception_complete_sequence++; + list_del(&pe->out_of_order_entry); + complete_exception(pe); + } + } else { + struct list_head *lh; + struct dm_snap_pending_exception *pe2; + + list_for_each_prev(lh, &s->out_of_order_list) { + pe2 = list_entry(lh, struct dm_snap_pending_exception, out_of_order_entry); + if (pe2->exception_sequence < pe->exception_sequence) + break; + } + list_add(&pe->out_of_order_entry, lh); + } } /* @@ -1553,6 +1608,8 @@ __find_pending_exception(struct dm_snapshot *s, return NULL; } + pe->exception_sequence = s->exception_start_sequence++; + dm_insert_exception(&s->pending, &pe->e); return pe; @@ -2192,7 +2249,7 @@ static struct target_type origin_target = { static struct target_type snapshot_target = { .name = "snapshot", - .version = {1, 11, 1}, + .version = {1, 12, 0}, .module = THIS_MODULE, .ctr = snapshot_ctr, .dtr = snapshot_dtr, -- cgit v0.10.2 From 5b2d06576c5410c10d95adfd5c4d8b24de861d87 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 22 Nov 2013 19:52:06 -0500 Subject: dm table: fail dm_table_create on dm_round_up overflow The dm_round_up function may overflow to zero. In this case, dm_table_create() must fail rather than go on to allocate an empty array with alloc_targets(). This fixes a possible memory corruption that could be caused by passing too large a number in "param->target_count". Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 465f08c..3ba6a38 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -200,6 +200,11 @@ int dm_table_create(struct dm_table **result, fmode_t mode, num_targets = dm_round_up(num_targets, KEYS_PER_NODE); + if (!num_targets) { + kfree(t); + return -ENOMEM; + } + if (alloc_targets(t, num_targets)) { kfree(t); return -ENOMEM; -- cgit v0.10.2 From f62b6b8f498658a9d537c7d380e9966f15e1b2a1 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 2 Dec 2013 16:47:01 -0500 Subject: dm space map metadata: return on failure in sm_metadata_new_block Commit 2fc48021f4afdd109b9e52b6eef5db89ca80bac7 ("dm persistent metadata: add space map threshold callback") introduced a regression to the metadata block allocation path that resulted in errors being ignored. This regression was uncovered by running the following device-mapper-test-suite test: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The ignored error codes in sm_metadata_new_block() could crash the kernel through use of either the dm-thin or dm-cache targets, e.g.: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block general protection fault: 0000 [#1] SMP ... Workqueue: dm-thin do_worker [dm_thin_pool] task: ffff880035ce2ab0 ti: ffff88021a054000 task.ti: ffff88021a054000 RIP: 0010:[] [] metadata_ll_load_ie+0x15/0x30 [dm_persistent_data] RSP: 0018:ffff88021a055a68 EFLAGS: 00010202 RAX: 003fc8243d212ba0 RBX: ffff88021a780070 RCX: ffff88021a055a78 RDX: ffff88021a055a78 RSI: 0040402222a92a80 RDI: ffff88021a780070 RBP: ffff88021a055a68 R08: ffff88021a055ba4 R09: 0000000000000010 R10: 0000000000000000 R11: 00000002a02e1000 R12: ffff88021a055ad4 R13: 0000000000000598 R14: ffffffffa0338470 R15: ffff88021a055ba4 FS: 0000000000000000(0000) GS:ffff88033fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f467c0291b8 CR3: 0000000001a0b000 CR4: 00000000000007e0 Stack: ffff88021a055ab8 ffffffffa0332020 ffff88021a055b30 0000000000000001 ffff88021a055b30 0000000000000000 ffff88021a055b18 0000000000000000 ffff88021a055ba4 ffff88021a055b98 ffff88021a055ae8 ffffffffa033304c Call Trace: [] sm_ll_lookup_bitmap+0x40/0xa0 [dm_persistent_data] [] sm_metadata_count_is_more_than_one+0x8c/0xc0 [dm_persistent_data] [] dm_tm_shadow_block+0x65/0x110 [dm_persistent_data] [] sm_ll_mutate+0x80/0x300 [dm_persistent_data] [] ? set_ref_count+0x10/0x10 [dm_persistent_data] [] sm_ll_inc+0x1a/0x20 [dm_persistent_data] [] sm_disk_new_block+0x60/0x80 [dm_persistent_data] [] ? down_write+0x16/0x40 [] dm_pool_alloc_data_block+0x54/0x80 [dm_thin_pool] [] alloc_data_block+0x9c/0x130 [dm_thin_pool] [] provision_block+0x4e/0x180 [dm_thin_pool] [] ? dm_thin_find_block+0x6a/0x110 [dm_thin_pool] [] process_bio+0x1ca/0x1f0 [dm_thin_pool] [] ? mempool_free+0x8d/0xa0 [] process_deferred_bios+0xc5/0x230 [dm_thin_pool] [] do_worker+0x51/0x60 [dm_thin_pool] [] process_one_work+0x182/0x3b0 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x160/0x160 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org # v3.10+ diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c index 1c95968..58fc1ee 100644 --- a/drivers/md/persistent-data/dm-space-map-metadata.c +++ b/drivers/md/persistent-data/dm-space-map-metadata.c @@ -384,12 +384,16 @@ static int sm_metadata_new_block(struct dm_space_map *sm, dm_block_t *b) struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm); int r = sm_metadata_new_block_(sm, b); - if (r) + if (r) { DMERR("unable to allocate new metadata block"); + return r; + } r = sm_metadata_get_nr_free(sm, &count); - if (r) + if (r) { DMERR("couldn't get free block count"); + return r; + } check_threshold(&smm->threshold, count); -- cgit v0.10.2 From fafc7a815e40255d24e80a1cb7365892362fa398 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Mon, 2 Dec 2013 17:57:42 -0500 Subject: dm thin: switch to read only mode if a mapping insert fails Switch the thin pool to read-only mode when dm_thin_insert_block() fails since there is little reason to expect the cause of the failure to be resolved without further action by user space. This issue was noticed with the device-mapper-test-suite using: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The quantity of errors logged in this case must be reduced. before patch: device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: thin: 253:4: no free metadata space available. device-mapper: thin: 253:4: switching pool to read-only mode after patch: device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: dm_thin_insert_block() failed: error = -28 device-mapper: thin: 253:4: switching pool to read-only mode Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 2c0cf51..24327ad 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -640,7 +640,9 @@ static void process_prepared_mapping(struct dm_thin_new_mapping *m) */ r = dm_thin_insert_block(tc->td, m->virt_block, m->data_block); if (r) { - DMERR_LIMIT("dm_thin_insert_block() failed"); + DMERR_LIMIT("%s: dm_thin_insert_block() failed: error = %d", + dm_device_name(pool->pool_md), r); + set_pool_mode(pool, PM_READ_ONLY); cell_error(pool, m->cell); goto out; } -- cgit v0.10.2 From 4a02b34e0cf1d0d0dd3737702841da4bf615a50a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 3 Dec 2013 12:20:57 -0500 Subject: dm thin: switch to read-only mode if metadata space is exhausted Switch the thin pool to read-only mode in alloc_data_block() if dm_pool_alloc_data_block() fails because the pool's metadata space is exhausted. Differentiate between data and metadata space in messages about no free space available. This issue was noticed with the device-mapper-test-suite using: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The quantity of errors logged in this case must be reduced. before patch: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: commit failed: error = -28 device-mapper: thin: 253:4: switching pool to read-only mode after patch: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: no free metadata space available. device-mapper: thin: 253:4: switching pool to read-only mode Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 24327ad..44ee489 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -959,7 +959,7 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) * table reload). */ if (!free_blocks) { - DMWARN("%s: no free space available.", + DMWARN("%s: no free data space available.", dm_device_name(pool->pool_md)); spin_lock_irqsave(&pool->lock, flags); pool->no_free_space = 1; @@ -969,8 +969,16 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) } r = dm_pool_alloc_data_block(pool->pmd, result); - if (r) + if (r) { + if (r == -ENOSPC && + !dm_pool_get_free_metadata_block_count(pool->pmd, &free_blocks) && + !free_blocks) { + DMWARN("%s: no free metadata space available.", + dm_device_name(pool->pool_md)); + set_pool_mode(pool, PM_READ_ONLY); + } return r; + } return 0; } -- cgit v0.10.2 From 020cc3b5e28c2e24f59f53a9154faf08564f308e Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 4 Dec 2013 15:05:36 -0500 Subject: dm thin: always fallback the pool mode if commit fails Rename commit_or_fallback() to commit(). Now all previous calls to commit() will trigger the pool mode to fallback if the commit fails. Also, check the error returned from commit() in alloc_data_block(). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 44ee489..af79bae 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -883,32 +883,23 @@ static void schedule_zero(struct thin_c *tc, dm_block_t virt_block, } } -static int commit(struct pool *pool) -{ - int r; - - r = dm_pool_commit_metadata(pool->pmd); - if (r) - DMERR_LIMIT("%s: commit failed: error = %d", - dm_device_name(pool->pool_md), r); - - return r; -} - /* * A non-zero return indicates read_only or fail_io mode. * Many callers don't care about the return value. */ -static int commit_or_fallback(struct pool *pool) +static int commit(struct pool *pool) { int r; if (get_pool_mode(pool) != PM_WRITE) return -EINVAL; - r = commit(pool); - if (r) + r = dm_pool_commit_metadata(pool->pmd); + if (r) { + DMERR_LIMIT("%s: dm_pool_commit_metadata failed: error = %d", + dm_device_name(pool->pool_md), r); set_pool_mode(pool, PM_READ_ONLY); + } return r; } @@ -945,7 +936,9 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) * Try to commit to see if that will free up some * more space. */ - (void) commit_or_fallback(pool); + r = commit(pool); + if (r) + return r; r = dm_pool_get_free_block_count(pool->pmd, &free_blocks); if (r) @@ -1359,7 +1352,7 @@ static void process_deferred_bios(struct pool *pool) if (bio_list_empty(&bios) && !need_commit_due_to_time(pool)) return; - if (commit_or_fallback(pool)) { + if (commit(pool)) { while ((bio = bio_list_pop(&bios))) bio_io_error(bio); return; @@ -2276,7 +2269,7 @@ static int pool_preresume(struct dm_target *ti) return r; if (need_commit1 || need_commit2) - (void) commit_or_fallback(pool); + (void) commit(pool); return 0; } @@ -2303,7 +2296,7 @@ static void pool_postsuspend(struct dm_target *ti) cancel_delayed_work(&pool->waker); flush_workqueue(pool->wq); - (void) commit_or_fallback(pool); + (void) commit(pool); } static int check_arg_count(unsigned argc, unsigned args_required) @@ -2437,7 +2430,7 @@ static int process_reserve_metadata_snap_mesg(unsigned argc, char **argv, struct if (r) return r; - (void) commit_or_fallback(pool); + (void) commit(pool); r = dm_pool_reserve_metadata_snap(pool->pmd); if (r) @@ -2499,7 +2492,7 @@ static int pool_message(struct dm_target *ti, unsigned argc, char **argv) DMWARN("Unrecognised thin pool target message received: %s", argv[0]); if (!r) - (void) commit_or_fallback(pool); + (void) commit(pool); return r; } @@ -2554,7 +2547,7 @@ static void pool_status(struct dm_target *ti, status_type_t type, /* Commit to ensure statistics aren't out-of-date */ if (!(status_flags & DM_STATUS_NOFLUSH_FLAG) && !dm_suspended(ti)) - (void) commit_or_fallback(pool); + (void) commit(pool); r = dm_pool_get_metadata_transaction_id(pool->pmd, &transaction_id); if (r) { -- cgit v0.10.2 From 5383ef3a929a1366e2ced45cd6d74be7aa2a2281 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 4 Dec 2013 16:30:01 -0500 Subject: dm thin: re-establish read-only state when switching to fail mode If the thin-pool transitioned to fail mode and the thin-pool's table were reloaded for some reason: the new table's default pool mode would be read-write, though it will transition to fail mode during resume. When the pool mode transitions directly from PM_WRITE to PM_FAIL we need to re-establish the intermediate read-only state in both the metadata and persistent-data block manager (as is usually done with the normal pool mode transition sequence: PM_WRITE -> PM_READ_ONLY -> PM_FAIL). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index af79bae..0d7852e 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1400,6 +1400,7 @@ static void set_pool_mode(struct pool *pool, enum pool_mode mode) case PM_FAIL: DMERR("%s: switching pool to failure mode", dm_device_name(pool->pool_md)); + dm_pool_metadata_read_only(pool->pmd); pool->process_bio = process_bio_fail; pool->process_discard = process_bio_fail; pool->process_prepared_mapping = process_prepared_mapping_fail; -- cgit v0.10.2 From 9b7aaa64f96f7ca280d75326fca42f42017b89ef Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 4 Dec 2013 16:58:19 -0500 Subject: dm thin: allow pool in read-only mode to transition to read-write mode A thin-pool may be in read-only mode because the pool's data or metadata space was exhausted. To allow for recovery, by adding more space to the pool, we must allow a pool to transition from PM_READ_ONLY to PM_WRITE mode. Otherwise, running out of space will render the pool permanently read-only. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 60bce43..8a30ad5 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1697,6 +1697,14 @@ void dm_pool_metadata_read_only(struct dm_pool_metadata *pmd) up_write(&pmd->root_lock); } +void dm_pool_metadata_read_write(struct dm_pool_metadata *pmd) +{ + down_write(&pmd->root_lock); + pmd->read_only = false; + dm_bm_set_read_write(pmd->bm); + up_write(&pmd->root_lock); +} + int dm_pool_register_metadata_threshold(struct dm_pool_metadata *pmd, dm_block_t threshold, dm_sm_threshold_fn fn, diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h index 845ebbe..7bcc0e1 100644 --- a/drivers/md/dm-thin-metadata.h +++ b/drivers/md/dm-thin-metadata.h @@ -193,6 +193,7 @@ int dm_pool_resize_metadata_dev(struct dm_pool_metadata *pmd, dm_block_t new_siz * that nothing is changing. */ void dm_pool_metadata_read_only(struct dm_pool_metadata *pmd); +void dm_pool_metadata_read_write(struct dm_pool_metadata *pmd); int dm_pool_register_metadata_threshold(struct dm_pool_metadata *pmd, dm_block_t threshold, diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 0d7852e..ee29037 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1425,6 +1425,7 @@ static void set_pool_mode(struct pool *pool, enum pool_mode mode) break; case PM_WRITE: + dm_pool_metadata_read_write(pool->pmd); pool->process_bio = process_bio; pool->process_discard = process_discard; pool->process_prepared_mapping = process_prepared_mapping; @@ -1641,12 +1642,19 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) struct pool_c *pt = ti->private; /* - * We want to make sure that degraded pools are never upgraded. + * We want to make sure that a pool in PM_FAIL mode is never upgraded. */ enum pool_mode old_mode = pool->pf.mode; enum pool_mode new_mode = pt->adjusted_pf.mode; - if (old_mode > new_mode) + /* + * If we were in PM_FAIL mode, rollback of metadata failed. We're + * not going to recover without a thin_repair. So we never let the + * pool move out of the old mode. On the other hand a PM_READ_ONLY + * may have been due to a lack of metadata or data space, and may + * now work (ie. if the underlying devices have been resized). + */ + if (old_mode == PM_FAIL) new_mode = old_mode; pool->ti = ti; diff --git a/drivers/md/persistent-data/dm-block-manager.c b/drivers/md/persistent-data/dm-block-manager.c index a7e8bf2..064a3c2 100644 --- a/drivers/md/persistent-data/dm-block-manager.c +++ b/drivers/md/persistent-data/dm-block-manager.c @@ -626,6 +626,12 @@ void dm_bm_set_read_only(struct dm_block_manager *bm) } EXPORT_SYMBOL_GPL(dm_bm_set_read_only); +void dm_bm_set_read_write(struct dm_block_manager *bm) +{ + bm->read_only = false; +} +EXPORT_SYMBOL_GPL(dm_bm_set_read_write); + u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor) { return crc32c(~(u32) 0, data, len) ^ init_xor; diff --git a/drivers/md/persistent-data/dm-block-manager.h b/drivers/md/persistent-data/dm-block-manager.h index 9a82083..13cd58e 100644 --- a/drivers/md/persistent-data/dm-block-manager.h +++ b/drivers/md/persistent-data/dm-block-manager.h @@ -108,9 +108,9 @@ int dm_bm_unlock(struct dm_block *b); int dm_bm_flush_and_unlock(struct dm_block_manager *bm, struct dm_block *superblock); - /* - * Request data be prefetched into the cache. - */ +/* + * Request data is prefetched into the cache. + */ void dm_bm_prefetch(struct dm_block_manager *bm, dm_block_t b); /* @@ -125,6 +125,7 @@ void dm_bm_prefetch(struct dm_block_manager *bm, dm_block_t b); * be returned if you do. */ void dm_bm_set_read_only(struct dm_block_manager *bm); +void dm_bm_set_read_write(struct dm_block_manager *bm); u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor); -- cgit v0.10.2 From af95e7a69b54bca48092e3013a92cfa3043c9c73 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 15 Nov 2013 10:51:20 +0000 Subject: dm cache policy mq: fix promotions to occur as expected Micro benchmarks that repeatedly issued IO to a single block were failing to cause a promotion from the origin device to the cache. Fix this by not updating the stats during map() if -EWOULDBLOCK will be returned. The mq policy will only update stats, consider migration, etc, once per tick period (a unit of time established between dm-cache core and the policies). When the IO thread calls the policy's map method, if it would like to migrate the associated block it returns -EWOULDBLOCK, the IO then gets handed over to a worker thread which handles the migration. The worker thread calls map again, to check the migration is still needed (avoids a race among other things). *BUT*, before this fix, if we were still in the same tick period the stats were already updated by the previous map call -- so the migration would no longer be requested. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer diff --git a/drivers/md/dm-cache-policy-mq.c b/drivers/md/dm-cache-policy-mq.c index 416b7b7..64780ad 100644 --- a/drivers/md/dm-cache-policy-mq.c +++ b/drivers/md/dm-cache-policy-mq.c @@ -730,15 +730,18 @@ static int pre_cache_entry_found(struct mq_policy *mq, struct entry *e, int r = 0; bool updated = updated_this_tick(mq, e); - requeue_and_update_tick(mq, e); - if ((!discarded_oblock && updated) || - !should_promote(mq, e, discarded_oblock, data_dir)) + !should_promote(mq, e, discarded_oblock, data_dir)) { + requeue_and_update_tick(mq, e); result->op = POLICY_MISS; - else if (!can_migrate) + + } else if (!can_migrate) r = -EWOULDBLOCK; - else + + else { + requeue_and_update_tick(mq, e); r = pre_cache_to_cache(mq, e, result); + } return r; } -- cgit v0.10.2 From 83f539e1a45a07934f0da69dc545bcbde01de36c Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 26 Nov 2013 11:03:54 -0500 Subject: dm cache: update Documentation for invalidate_cblocks's range syntax The cache target's invalidate_cblocks message allows cache block (cblock) ranges to be expressed with: - The range's value is "one past the end", so the range includes through -1. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 274752f..719320b 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -266,10 +266,12 @@ E.g. Invalidation is removing an entry from the cache without writing it back. Cache blocks can be invalidated via the invalidate_cblocks message, which takes an arbitrary number of cblock ranges. Each cblock -must be expressed as a decimal value, in the future a variant message -that takes cblock ranges expressed in hexidecimal may be needed to -better support efficient invalidation of larger caches. The cache must -be in passthrough mode when invalidate_cblocks is used. +range's end value is "one past the end", meaning 5-10 expresses a range +of values from 5 to 9. Each cblock must be expressed as a decimal +value, in the future a variant message that takes cblock ranges +expressed in hexidecimal may be needed to better support efficient +invalidation of larger caches. The cache must be in passthrough mode +when invalidate_cblocks is used. invalidate_cblocks [|-]* -- cgit v0.10.2 From 088448007bb97af47ec3f05fc3e9517ffb5e9fba Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sat, 30 Nov 2013 12:58:42 +0100 Subject: dm cache: actually resize cache Commit f494a9c6b1b6dd9a9f21bbb75d9210d478eeb498 ("dm cache: cache shrinking support") broke cache resizing support. dm_cache_resize() is called with cache->cache_size before it gets updated to new_size, so it is a no-op. But the dm-cache superblock is updated with the new_size even though the backing dm-array is not resized. Fix this by passing the new_size to dm_cache_resize(). Signed-off-by: Vincent Pelletier Acked-by: Joe Thornber Signed-off-by: Mike Snitzer diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 9efcf10..1b1469e 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -2755,7 +2755,7 @@ static int resize_cache_dev(struct cache *cache, dm_cblock_t new_size) { int r; - r = dm_cache_resize(cache->cmd, cache->cache_size); + r = dm_cache_resize(cache->cmd, new_size); if (r) { DMERR("could not resize cache metadata"); return r; -- cgit v0.10.2 From 673498b8ed4c4d4b7221c5309d891c5eac2b7528 Mon Sep 17 00:00:00 2001 From: Stefan Tomanek Date: Tue, 10 Dec 2013 23:21:25 +0100 Subject: inet: fix NULL pointer Oops in fib(6)_rule_suppress This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle Tested-by: Daniel Golle Signed-off-by: Stefan Tomanek Signed-off-by: David S. Miller diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c index 523be38..f2e1573 100644 --- a/net/ipv4/fib_rules.c +++ b/net/ipv4/fib_rules.c @@ -104,7 +104,10 @@ errout: static bool fib4_rule_suppress(struct fib_rule *rule, struct fib_lookup_arg *arg) { struct fib_result *result = (struct fib_result *) arg->result; - struct net_device *dev = result->fi->fib_dev; + struct net_device *dev = NULL; + + if (result->fi) + dev = result->fi->fib_dev; /* do not accept result if the route does * not meet the required prefix length diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c index e275916..3fd0a57 100644 --- a/net/ipv6/fib6_rules.c +++ b/net/ipv6/fib6_rules.c @@ -122,7 +122,11 @@ out: static bool fib6_rule_suppress(struct fib_rule *rule, struct fib_lookup_arg *arg) { struct rt6_info *rt = (struct rt6_info *) arg->result; - struct net_device *dev = rt->rt6i_idev->dev; + struct net_device *dev = NULL; + + if (rt->rt6i_idev) + dev = rt->rt6i_idev->dev; + /* do not accept result if the route does * not meet the required prefix length */ -- cgit v0.10.2 From 503cf95c061a0551eb684da364509297efbe55d9 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 10 Dec 2013 14:56:06 -0800 Subject: x86, build, icc: Remove uninitialized_var() from compiler-intel.h When compiling with icc, ends up included because the icc environment defines __GNUC__. Thus, we neither need nor want to have this macro defined in both compiler-gcc.h and compiler-intel.h, and the fact that they are inconsistent just makes the compiler spew warnings. Reported-by: Sunil K. Pandey Cc: Kevin B. Smith Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/n/tip-0mbwou1zt7pafij09b897lg3@git.kernel.org Cc: diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index 973ce10..dc1bd3d 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -28,8 +28,6 @@ #endif -#define uninitialized_var(x) x - #ifndef __HAVE_BUILTIN_BSWAP16__ /* icc has this, but it's called _bswap16 */ #define __HAVE_BUILTIN_BSWAP16__ -- cgit v0.10.2 From e9c56f8d2f851fb6d6ce6794c0f5463b862a878e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 10 Dec 2013 19:40:43 +0100 Subject: net: allwinner: emac: Add missing free_irq The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 50b853a..46dfb13 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -717,8 +717,7 @@ static int emac_open(struct net_device *dev) if (netif_msg_ifup(db)) dev_dbg(db->dev, "enabling %s\n", dev->name); - if (devm_request_irq(db->dev, dev->irq, &emac_interrupt, - 0, dev->name, dev)) + if (request_irq(dev->irq, &emac_interrupt, 0, dev->name, dev)) return -EAGAIN; /* Initialize EMAC board */ @@ -774,6 +773,8 @@ static int emac_stop(struct net_device *ndev) emac_shutdown(ndev); + free_irq(ndev->irq, ndev); + return 0; } -- cgit v0.10.2 From 04bf9ba720fcc4fa313fa122b799ae0989b6cd50 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 29 Nov 2013 14:44:43 -0500 Subject: x86, efi: Don't use (U)EFI time services on 32 bit UEFI time services are often broken once we're in virtual mode. We were already refusing to use them on 64-bit systems, but it turns out that they're also broken on some 32-bit firmware, including the Dell Venue. Disable them for now, we can revisit once we have the 1:1 mappings code incorporated. Signed-off-by: Matthew Garrett Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com Cc: Cc: Matt Fleming Signed-off-by: H. Peter Anvin diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 92c0234..cceb813 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -690,13 +690,6 @@ void __init efi_init(void) set_bit(EFI_MEMMAP, &x86_efi_facility); -#ifdef CONFIG_X86_32 - if (efi_is_native()) { - x86_platform.get_wallclock = efi_get_time; - x86_platform.set_wallclock = efi_set_rtc_mmss; - } -#endif - #if EFI_DEBUG print_efi_memmap(); #endif -- cgit v0.10.2 From 4cb57ab4a2e61978f3a9b7d4f53988f30d61c27f Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 5 Dec 2013 17:33:29 -0500 Subject: dm bufio: initialize read-only module parameters Some module parameters in dm-bufio are read-only. These parameters inform the user about memory consumption. They are not supposed to be changed by the user. However, despite being read-only, these parameters can be set on modprobe or insmod command line, for example: modprobe dm-bufio current_allocated_bytes=12345 The kernel doesn't expect that these variables can be non-zero at module initialization and if the user sets them, it results in BUG. This patch initializes the variables in the module init routine, so that user-supplied values are ignored. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.2+ diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 173cbb2..54bdd923 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -1717,6 +1717,11 @@ static int __init dm_bufio_init(void) { __u64 mem; + dm_bufio_allocated_kmem_cache = 0; + dm_bufio_allocated_get_free_pages = 0; + dm_bufio_allocated_vmalloc = 0; + dm_bufio_current_allocated = 0; + memset(&dm_bufio_caches, 0, sizeof dm_bufio_caches); memset(&dm_bufio_cache_names, 0, sizeof dm_bufio_cache_names); -- cgit v0.10.2 From 76f5bee5c3b45c617f91243e85547fc8f67bc678 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 5 Dec 2013 17:34:19 -0500 Subject: dm stats: initialize read-only module parameter The module parameter stats_current_allocated_bytes in dm-mod is read-only. This parameter informs the user about memory consumption. It is not supposed to be changed by the user. However, despite being read-only, this parameter can be set on modprobe or insmod command line: modprobe dm-mod stats_current_allocated_bytes=12345 The kernel doesn't expect that this variable can be non-zero at module initialization and if the user sets it, it results in warning. This patch initializes the variable in the module init routine, so that user-supplied value is ignored. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.12+ diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c index 3d404c1..28a9012 100644 --- a/drivers/md/dm-stats.c +++ b/drivers/md/dm-stats.c @@ -964,6 +964,7 @@ int dm_stats_message(struct mapped_device *md, unsigned argc, char **argv, int __init dm_statistics_init(void) { + shared_memory_amount = 0; dm_stat_need_rcu_barrier = 0; return 0; } -- cgit v0.10.2 From 781c2a5a5f75eacc04663aced0f0f1a648d4f308 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 2 Dec 2013 15:26:19 -0500 Subject: nfsd: when reusing an existing repcache entry, unhash it first The DRC code will attempt to reuse an existing, expired cache entry in preference to allocating a new one. It'll then search the cache, and if it gets a hit it'll then free the cache entry that it was going to reuse. The cache code doesn't unhash the entry that it's going to reuse however, so it's possible for it end up designating an entry for reuse and then subsequently freeing the same entry after it finds it. This leads it to a later use-after-free situation and usually some list corruption warnings or an oops. Fix this by simply unhashing the entry that we intend to reuse. That will mean that it's not findable via a search and should prevent this situation from occurring. Cc: stable@vger.kernel.org # v3.10+ Reported-by: Christoph Hellwig Reported-by: g. artim Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c index 9186c7c..b6af150 100644 --- a/fs/nfsd/nfscache.c +++ b/fs/nfsd/nfscache.c @@ -132,6 +132,13 @@ nfsd_reply_cache_alloc(void) } static void +nfsd_reply_cache_unhash(struct svc_cacherep *rp) +{ + hlist_del_init(&rp->c_hash); + list_del_init(&rp->c_lru); +} + +static void nfsd_reply_cache_free_locked(struct svc_cacherep *rp) { if (rp->c_type == RC_REPLBUFF && rp->c_replvec.iov_base) { @@ -417,7 +424,7 @@ nfsd_cache_lookup(struct svc_rqst *rqstp) rp = list_first_entry(&lru_head, struct svc_cacherep, c_lru); if (nfsd_cache_entry_expired(rp) || num_drc_entries >= max_drc_entries) { - lru_put_end(rp); + nfsd_reply_cache_unhash(rp); prune_cache_entries(); goto search_cache; } -- cgit v0.10.2 From 12663bfc97c8b3fdb292428105dd92d563164050 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Sat, 7 Dec 2013 17:26:27 -0500 Subject: net: unix: allow set_peek_off to fail unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: Sasha Levin Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/include/linux/net.h b/include/linux/net.h index 4bcee94..69be3e6 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -181,7 +181,7 @@ struct proto_ops { int offset, size_t size, int flags); ssize_t (*splice_read)(struct socket *sock, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); - void (*set_peek_off)(struct sock *sk, int val); + int (*set_peek_off)(struct sock *sk, int val); }; #define DECLARE_SOCKADDR(type, dst, src) \ diff --git a/net/core/sock.c b/net/core/sock.c index ab20ed9..5393b4b 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -882,7 +882,7 @@ set_rcvbuf: case SO_PEEK_OFF: if (sock->ops->set_peek_off) - sock->ops->set_peek_off(sk, val); + ret = sock->ops->set_peek_off(sk, val); else ret = -EOPNOTSUPP; break; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 01625cc..a0ca162 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -530,13 +530,17 @@ static int unix_seqpacket_sendmsg(struct kiocb *, struct socket *, static int unix_seqpacket_recvmsg(struct kiocb *, struct socket *, struct msghdr *, size_t, int); -static void unix_set_peek_off(struct sock *sk, int val) +static int unix_set_peek_off(struct sock *sk, int val) { struct unix_sock *u = unix_sk(sk); - mutex_lock(&u->readlock); + if (mutex_lock_interruptible(&u->readlock)) + return -EINTR; + sk->sk_peek_off = val; mutex_unlock(&u->readlock); + + return 0; } -- cgit v0.10.2 From fffc15a5012e9052d3b236efc56840841a125416 Mon Sep 17 00:00:00 2001 From: Fan Du Date: Mon, 9 Dec 2013 10:33:53 +0800 Subject: vxlan: release rt when found circular route Otherwise causing dst memory leakage. Have Checked all other type tunnel device transmit implementation, no such things happens anymore. Signed-off-by: Fan Du Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 0358c07..249e01c 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1668,7 +1668,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, netdev_dbg(dev, "circular route to %pI4\n", &dst->sin.sin_addr.s_addr); dev->stats.collisions++; - goto tx_error; + goto rt_tx_error; } /* Bypass encapsulation if the destination is local */ -- cgit v0.10.2 From 923347bb83c67c3a572b04decb5875c3adb0d306 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 9 Dec 2013 18:25:16 +0800 Subject: tun: unbreak truncated packet signalling Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by never return a length greater than iov length in tun_put_user(). This patch fixes this by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of iov length. Reported-by: Vlad Yasevich Cc: Vlad Yasevich Cc: Zhi Yong Wu Signed-off-by: Jason Wang Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index e26cbea..dd1bd7a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1183,7 +1183,11 @@ static ssize_t tun_put_user(struct tun_struct *tun, const struct iovec *iv, int len) { struct tun_pi pi = { 0, skb->protocol }; - ssize_t total = 0; + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; + ssize_t total = 0, off = 0; int vlan_offset = 0; if (!(tun->flags & TUN_NO_PI)) { @@ -1248,14 +1252,11 @@ static ssize_t tun_put_user(struct tun_struct *tun, total += tun->vnet_hdr_sz; } + off = total; if (!vlan_tx_tag_present(skb)) { len = min_t(int, skb->len, len); } else { int copy, ret; - struct { - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - } veth; veth.h_vlan_proto = skb->vlan_proto; veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); @@ -1264,22 +1265,22 @@ static ssize_t tun_put_user(struct tun_struct *tun, len = min_t(int, skb->len + VLAN_HLEN, len); copy = min_t(int, vlan_offset, len); - ret = skb_copy_datagram_const_iovec(skb, 0, iv, total, copy); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, off, copy); len -= copy; - total += copy; + off += copy; if (ret || !len) goto done; copy = min_t(int, sizeof(veth), len); - ret = memcpy_toiovecend(iv, (void *)&veth, total, copy); + ret = memcpy_toiovecend(iv, (void *)&veth, off, copy); len -= copy; - total += copy; + off += copy; if (ret || !len) goto done; } - skb_copy_datagram_const_iovec(skb, vlan_offset, iv, total, len); - total += len; + skb_copy_datagram_const_iovec(skb, vlan_offset, iv, off, len); + total += skb->len + (vlan_offset ? sizeof(veth) : 0); done: tun->dev->stats.tx_packets++; -- cgit v0.10.2 From 730054da3868c35809fd31a4018044ab10b0e215 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 9 Dec 2013 18:25:17 +0800 Subject: macvtap: signal truncated packets macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the truncated checking work. Cc: Vlad Yasevich Cc: Zhi Yong Wu Signed-off-by: Jason Wang Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 957cc5c..7544a0c 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -767,10 +767,14 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, const struct sk_buff *skb, const struct iovec *iv, int len) { - int ret; + int ret, off; int vnet_hdr_len = 0; int vlan_offset = 0; int copied; + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; if (q->flags & IFF_VNET_HDR) { struct virtio_net_hdr vnet_hdr; @@ -785,16 +789,13 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr))) return -EFAULT; } - copied = vnet_hdr_len; + off = copied = vnet_hdr_len; if (!vlan_tx_tag_present(skb)) len = min_t(int, skb->len, len); else { int copy; - struct { - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - } veth; + veth.h_vlan_proto = skb->vlan_proto; veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); @@ -802,22 +803,22 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, len = min_t(int, skb->len + VLAN_HLEN, len); copy = min_t(int, vlan_offset, len); - ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, off, copy); len -= copy; - copied += copy; + off += copy; if (ret || !len) goto done; copy = min_t(int, sizeof(veth), len); - ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy); + ret = memcpy_toiovecend(iv, (void *)&veth, off, copy); len -= copy; - copied += copy; + off += copy; if (ret || !len) goto done; } - ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); - copied += len; + ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, off, len); + copied += skb->len + (vlan_offset ? sizeof(veth) : 0); done: return ret ? ret : copied; @@ -875,7 +876,7 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv, } ret = macvtap_do_read(q, iocb, iv, len, file->f_flags & O_NONBLOCK); - ret = min_t(ssize_t, ret, len); /* XXX copied from tun.c. Why? */ + ret = min_t(ssize_t, ret, len); if (ret > 0) iocb->ki_pos = ret; out: -- cgit v0.10.2 From bbd37626e6be9500e74aa244a3be1a69b6645ea0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 10 Dec 2013 22:10:21 -0500 Subject: net: Revert macvtap/tun truncation signalling changes. Jason Wang and Michael S. Tsirkin are still discussing how to properly fix this. Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 7544a0c..957cc5c 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -767,14 +767,10 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, const struct sk_buff *skb, const struct iovec *iv, int len) { - int ret, off; + int ret; int vnet_hdr_len = 0; int vlan_offset = 0; int copied; - struct { - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - } veth; if (q->flags & IFF_VNET_HDR) { struct virtio_net_hdr vnet_hdr; @@ -789,13 +785,16 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr))) return -EFAULT; } - off = copied = vnet_hdr_len; + copied = vnet_hdr_len; if (!vlan_tx_tag_present(skb)) len = min_t(int, skb->len, len); else { int copy; - + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; veth.h_vlan_proto = skb->vlan_proto; veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); @@ -803,22 +802,22 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, len = min_t(int, skb->len + VLAN_HLEN, len); copy = min_t(int, vlan_offset, len); - ret = skb_copy_datagram_const_iovec(skb, 0, iv, off, copy); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); len -= copy; - off += copy; + copied += copy; if (ret || !len) goto done; copy = min_t(int, sizeof(veth), len); - ret = memcpy_toiovecend(iv, (void *)&veth, off, copy); + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy); len -= copy; - off += copy; + copied += copy; if (ret || !len) goto done; } - ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, off, len); - copied += skb->len + (vlan_offset ? sizeof(veth) : 0); + ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); + copied += len; done: return ret ? ret : copied; @@ -876,7 +875,7 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv, } ret = macvtap_do_read(q, iocb, iv, len, file->f_flags & O_NONBLOCK); - ret = min_t(ssize_t, ret, len); + ret = min_t(ssize_t, ret, len); /* XXX copied from tun.c. Why? */ if (ret > 0) iocb->ki_pos = ret; out: diff --git a/drivers/net/tun.c b/drivers/net/tun.c index dd1bd7a..e26cbea 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1183,11 +1183,7 @@ static ssize_t tun_put_user(struct tun_struct *tun, const struct iovec *iv, int len) { struct tun_pi pi = { 0, skb->protocol }; - struct { - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - } veth; - ssize_t total = 0, off = 0; + ssize_t total = 0; int vlan_offset = 0; if (!(tun->flags & TUN_NO_PI)) { @@ -1252,11 +1248,14 @@ static ssize_t tun_put_user(struct tun_struct *tun, total += tun->vnet_hdr_sz; } - off = total; if (!vlan_tx_tag_present(skb)) { len = min_t(int, skb->len, len); } else { int copy, ret; + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; veth.h_vlan_proto = skb->vlan_proto; veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); @@ -1265,22 +1264,22 @@ static ssize_t tun_put_user(struct tun_struct *tun, len = min_t(int, skb->len + VLAN_HLEN, len); copy = min_t(int, vlan_offset, len); - ret = skb_copy_datagram_const_iovec(skb, 0, iv, off, copy); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, total, copy); len -= copy; - off += copy; + total += copy; if (ret || !len) goto done; copy = min_t(int, sizeof(veth), len); - ret = memcpy_toiovecend(iv, (void *)&veth, off, copy); + ret = memcpy_toiovecend(iv, (void *)&veth, total, copy); len -= copy; - off += copy; + total += copy; if (ret || !len) goto done; } - skb_copy_datagram_const_iovec(skb, vlan_offset, iv, off, len); - total += skb->len + (vlan_offset ? sizeof(veth) : 0); + skb_copy_datagram_const_iovec(skb, vlan_offset, iv, total, len); + total += len; done: tun->dev->stats.tx_packets++; -- cgit v0.10.2 From 388d3335575f4c056dcf7138a30f1454e2145cd8 Mon Sep 17 00:00:00 2001 From: Nat Gurumoorthy Date: Mon, 9 Dec 2013 10:43:21 -0800 Subject: tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0 The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 472305c..f3dd93b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -16503,6 +16503,9 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Clear this out for sanity. */ tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); + /* Clear TG3PCI_REG_BASE_ADDR to prevent hangs. */ + tw32(TG3PCI_REG_BASE_ADDR, 0); + pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &pci_state_reg); if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 && -- cgit v0.10.2 From 993b858e37b3120ee76d9957a901cca22312ffaa Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Mon, 9 Dec 2013 22:54:46 -0800 Subject: tipc: correct the order of stopping services at rmmod The 'signal handler' service in TIPC is a mechanism that makes it possible to postpone execution of functions, by launcing them into a job queue for execution in a separate tasklet, independent of the launching execution thread. When we do rmmod on the tipc module, this service is stopped after the network service. At the same time, the stopping of the network service may itself launch jobs for execution, with the risk that these functions may be scheduled for execution after the data structures meant to be accessed by the job have already been deleted. We have seen this happen, most often resulting in an oops. This commit ensures that the signal handler is the very first to be stopped when TIPC is shut down, so there are no surprises during the cleanup of the other services. Signed-off-by: Jon Maloy Reviewed-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/net/tipc/core.c b/net/tipc/core.c index fd4eeea..c6d3f75 100644 --- a/net/tipc/core.c +++ b/net/tipc/core.c @@ -113,7 +113,6 @@ err: static void tipc_core_stop(void) { tipc_netlink_stop(); - tipc_handler_stop(); tipc_cfg_stop(); tipc_subscr_stop(); tipc_nametbl_stop(); @@ -146,9 +145,10 @@ static int tipc_core_start(void) res = tipc_subscr_start(); if (!res) res = tipc_cfg_init(); - if (res) + if (res) { + tipc_handler_stop(); tipc_core_stop(); - + } return res; } @@ -178,6 +178,7 @@ static int __init tipc_init(void) static void __exit tipc_exit(void) { + tipc_handler_stop(); tipc_core_stop_net(); tipc_core_stop(); pr_info("Deactivated\n"); -- cgit v0.10.2 From 00ede977098be3296d42d05a4265ec5ec4a28419 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Mon, 9 Dec 2013 22:54:47 -0800 Subject: tipc: protect handler_enabled variable with qitem_lock spin lock 'handler_enabled' is a global flag indicating whether the TIPC signal handling service is enabled or not. The lack of lock protection for this flag incurs a risk for contention, so that a tipc_k_signal() call might queue a signal handler to a destroyed signal queue, with unpredictable results. To correct this, we let the already existing 'qitem_lock' protect the flag, as it already does with the queue itself. This way, we ensure that the flag always is consistent across all cores. Signed-off-by: Ying Xue Reviewed-by: Paul Gortmaker Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/handler.c b/net/tipc/handler.c index b36f0fc..e4bc8a2 100644 --- a/net/tipc/handler.c +++ b/net/tipc/handler.c @@ -56,12 +56,13 @@ unsigned int tipc_k_signal(Handler routine, unsigned long argument) { struct queue_item *item; + spin_lock_bh(&qitem_lock); if (!handler_enabled) { pr_err("Signal request ignored by handler\n"); + spin_unlock_bh(&qitem_lock); return -ENOPROTOOPT; } - spin_lock_bh(&qitem_lock); item = kmem_cache_alloc(tipc_queue_item_cache, GFP_ATOMIC); if (!item) { pr_err("Signal queue out of memory\n"); @@ -112,10 +113,14 @@ void tipc_handler_stop(void) struct list_head *l, *n; struct queue_item *item; - if (!handler_enabled) + spin_lock_bh(&qitem_lock); + if (!handler_enabled) { + spin_unlock_bh(&qitem_lock); return; - + } handler_enabled = 0; + spin_unlock_bh(&qitem_lock); + tasklet_kill(&tipc_tasklet); spin_lock_bh(&qitem_lock); -- cgit v0.10.2 From 9f70f46bd4c7267d48ef461a1d613ec9ec0d520c Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 10 Dec 2013 06:48:15 -0500 Subject: sctp: properly latch and use autoclose value from sock to association Currently, sctp associations latch a sockets autoclose value to an association at association init time, subject to capping constraints from the max_autoclose sysctl value. This leads to an odd situation where an application may set a socket level autoclose timeout, but sliently sctp will limit the autoclose timeout to something less than that. Fix this by modifying the autoclose setsockopt function to check the limit, cap it and warn the user via syslog that the timeout is capped. This will allow getsockopt to return valid autoclose timeout values that reflect what subsequent associations actually use. While were at it, also elimintate the assoc->autoclose variable, it duplicates whats in the timeout array, which leads to multiple sources for the same information, that may differ (as the former isn't subject to any capping). This gives us the timeout information in a canonical place and saves some space in the association structure as well. Signed-off-by: Neil Horman Acked-by: Vlad Yasevich CC: Wang Weidong CC: David Miller CC: Vlad Yasevich CC: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index ea0ca5f..67b5d00 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1726,12 +1726,6 @@ struct sctp_association { /* How many duplicated TSNs have we seen? */ int numduptsns; - /* Number of seconds of idle time before an association is closed. - * In the association context, this is really used as a boolean - * since the real timeout is stored in the timeouts array - */ - __u32 autoclose; - /* These are to support * "SCTP Extensions for Dynamic Reconfiguration of IP Addresses * and Enforcement of Flow and Message Limits" diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 68a27f9..31ed008 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -154,8 +154,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0; asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay; - asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = - min_t(unsigned long, sp->autoclose, net->sctp.max_autoclose) * HZ; + asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = sp->autoclose * HZ; /* Initializes the timers */ for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) @@ -291,8 +290,6 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->peer.ipv6_address = 1; INIT_LIST_HEAD(&asoc->asocs); - asoc->autoclose = sp->autoclose; - asoc->default_stream = sp->default_stream; asoc->default_ppid = sp->default_ppid; asoc->default_flags = sp->default_flags; diff --git a/net/sctp/output.c b/net/sctp/output.c index 0e2644d..0fb140f 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -581,7 +581,8 @@ int sctp_packet_transmit(struct sctp_packet *packet) unsigned long timeout; /* Restart the AUTOCLOSE timer when sending data. */ - if (sctp_state(asoc, ESTABLISHED) && asoc->autoclose) { + if (sctp_state(asoc, ESTABLISHED) && + asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) { timer = &asoc->timers[SCTP_EVENT_TIMEOUT_AUTOCLOSE]; timeout = asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index dfe3f36..a26065b 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -820,7 +820,7 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(struct net *net, SCTP_INC_STATS(net, SCTP_MIB_PASSIVEESTABS); sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMERS_START, SCTP_NULL()); - if (new_asoc->autoclose) + if (new_asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); @@ -908,7 +908,7 @@ sctp_disposition_t sctp_sf_do_5_1E_ca(struct net *net, SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB); SCTP_INC_STATS(net, SCTP_MIB_ACTIVEESTABS); sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMERS_START, SCTP_NULL()); - if (asoc->autoclose) + if (asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); @@ -2970,7 +2970,7 @@ sctp_disposition_t sctp_sf_eat_data_6_2(struct net *net, if (chunk->chunk_hdr->flags & SCTP_DATA_SACK_IMM) force = SCTP_FORCE(); - if (asoc->autoclose) { + if (asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) { sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); } @@ -3878,7 +3878,7 @@ sctp_disposition_t sctp_sf_eat_fwd_tsn(struct net *net, SCTP_CHUNK(chunk)); /* Count this as receiving DATA. */ - if (asoc->autoclose) { + if (asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) { sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); } @@ -5267,7 +5267,7 @@ sctp_disposition_t sctp_sf_do_9_2_start_shutdown( sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, SCTP_TO(SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD)); - if (asoc->autoclose) + if (asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); @@ -5346,7 +5346,7 @@ sctp_disposition_t sctp_sf_do_9_2_shutdown_ack( sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, SCTP_TO(SCTP_EVENT_TIMEOUT_T2_SHUTDOWN)); - if (asoc->autoclose) + if (asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE]) sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP, SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE)); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 72046b9..5455043 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2196,6 +2196,7 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, unsigned int optlen) { struct sctp_sock *sp = sctp_sk(sk); + struct net *net = sock_net(sk); /* Applicable to UDP-style socket only */ if (sctp_style(sk, TCP)) @@ -2205,6 +2206,9 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, if (copy_from_user(&sp->autoclose, optval, optlen)) return -EFAULT; + if (sp->autoclose > net->sctp.max_autoclose) + sp->autoclose = net->sctp.max_autoclose; + return 0; } -- cgit v0.10.2 From ce7a3bdf18a8dbcba1409f5d335c56fde432ca89 Mon Sep 17 00:00:00 2001 From: Florent Fourcot Date: Tue, 10 Dec 2013 15:15:46 +0100 Subject: ipv6: do not erase dst address with flow label destination This patch is following b579035ff766c9412e2b92abf5cab794bff102b6 "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by: Florent Fourcot Reviewed-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 4ac71ff..2b90a78 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -851,7 +851,6 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr, flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - usin->sin6_addr = flowlabel->dst; fl6_sock_release(flowlabel); } } diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 8dfe1f4..93b1aa3 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -73,7 +73,6 @@ int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - usin->sin6_addr = flowlabel->dst; } } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 7fb4e14..b6bb87e 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -792,7 +792,6 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - daddr = &flowlabel->dst; } } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 0740f93..f67033b 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -156,7 +156,6 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr, flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - usin->sin6_addr = flowlabel->dst; fl6_sock_release(flowlabel); } } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index bcd5699..089c741 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1140,7 +1140,6 @@ do_udp_sendmsg: flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - daddr = &flowlabel->dst; } } diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index d9b437e..bb6e206 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -528,7 +528,6 @@ static int l2tp_ip6_sendmsg(struct kiocb *iocb, struct sock *sk, flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); if (flowlabel == NULL) return -EINVAL; - daddr = &flowlabel->dst; } } -- cgit v0.10.2 From 85f935d41af097a87067367be66de52896b964e1 Mon Sep 17 00:00:00 2001 From: wangweidong Date: Wed, 11 Dec 2013 09:50:38 +0800 Subject: sctp: check the rto_min and rto_max in setsockopt When we set 0 to rto_min or rto_max, just not change the value. Also we should check the rto_min > rto_max. Suggested-by: Vlad Yasevich Signed-off-by: Wang Weidong Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 5455043..42b709c 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2815,6 +2815,8 @@ static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, unsigne { struct sctp_rtoinfo rtoinfo; struct sctp_association *asoc; + unsigned long rto_min, rto_max; + struct sctp_sock *sp = sctp_sk(sk); if (optlen != sizeof (struct sctp_rtoinfo)) return -EINVAL; @@ -2828,26 +2830,36 @@ static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, unsigne if (!asoc && rtoinfo.srto_assoc_id && sctp_style(sk, UDP)) return -EINVAL; + rto_max = rtoinfo.srto_max; + rto_min = rtoinfo.srto_min; + + if (rto_max) + rto_max = asoc ? msecs_to_jiffies(rto_max) : rto_max; + else + rto_max = asoc ? asoc->rto_max : sp->rtoinfo.srto_max; + + if (rto_min) + rto_min = asoc ? msecs_to_jiffies(rto_min) : rto_min; + else + rto_min = asoc ? asoc->rto_min : sp->rtoinfo.srto_min; + + if (rto_min > rto_max) + return -EINVAL; + if (asoc) { if (rtoinfo.srto_initial != 0) asoc->rto_initial = msecs_to_jiffies(rtoinfo.srto_initial); - if (rtoinfo.srto_max != 0) - asoc->rto_max = msecs_to_jiffies(rtoinfo.srto_max); - if (rtoinfo.srto_min != 0) - asoc->rto_min = msecs_to_jiffies(rtoinfo.srto_min); + asoc->rto_max = rto_max; + asoc->rto_min = rto_min; } else { /* If there is no association or the association-id = 0 * set the values to the endpoint. */ - struct sctp_sock *sp = sctp_sk(sk); - if (rtoinfo.srto_initial != 0) sp->rtoinfo.srto_initial = rtoinfo.srto_initial; - if (rtoinfo.srto_max != 0) - sp->rtoinfo.srto_max = rtoinfo.srto_max; - if (rtoinfo.srto_min != 0) - sp->rtoinfo.srto_min = rtoinfo.srto_min; + sp->rtoinfo.srto_max = rto_max; + sp->rtoinfo.srto_min = rto_min; } return 0; -- cgit v0.10.2 From 4f3fdf3bc59cafd14c3bc2c2369efad34c7aa8b5 Mon Sep 17 00:00:00 2001 From: wangweidong Date: Wed, 11 Dec 2013 09:50:39 +0800 Subject: sctp: add check rto_min and rto_max in sysctl rto_min should be smaller than rto_max while rto_max should be larger than rto_min. Add two proc_handler for the checking. Suggested-by: Vlad Yasevich Signed-off-by: Wang Weidong Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c index 6b36561..43b5e32 100644 --- a/net/sctp/sysctl.c +++ b/net/sctp/sysctl.c @@ -61,6 +61,13 @@ static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, void __user *buffer, size_t *lenp, loff_t *ppos); +static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos); +static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos); + static struct ctl_table sctp_table[] = { { .procname = "sctp_mem", @@ -102,17 +109,17 @@ static struct ctl_table sctp_net_table[] = { .data = &init_net.sctp.rto_min, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = proc_dointvec_minmax, + .proc_handler = proc_sctp_do_rto_min, .extra1 = &one, - .extra2 = &timer_max + .extra2 = &init_net.sctp.rto_max }, { .procname = "rto_max", .data = &init_net.sctp.rto_max, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &one, + .proc_handler = proc_sctp_do_rto_max, + .extra1 = &init_net.sctp.rto_min, .extra2 = &timer_max }, { @@ -342,6 +349,60 @@ static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, return ret; } +static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + struct net *net = current->nsproxy->net_ns; + int new_value; + struct ctl_table tbl; + unsigned int min = *(unsigned int *) ctl->extra1; + unsigned int max = *(unsigned int *) ctl->extra2; + int ret; + + memset(&tbl, 0, sizeof(struct ctl_table)); + tbl.maxlen = sizeof(unsigned int); + + if (write) + tbl.data = &new_value; + else + tbl.data = &net->sctp.rto_min; + ret = proc_dointvec(&tbl, write, buffer, lenp, ppos); + if (write) { + if (ret || new_value > max || new_value < min) + return -EINVAL; + net->sctp.rto_min = new_value; + } + return ret; +} + +static int proc_sctp_do_rto_max(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + struct net *net = current->nsproxy->net_ns; + int new_value; + struct ctl_table tbl; + unsigned int min = *(unsigned int *) ctl->extra1; + unsigned int max = *(unsigned int *) ctl->extra2; + int ret; + + memset(&tbl, 0, sizeof(struct ctl_table)); + tbl.maxlen = sizeof(unsigned int); + + if (write) + tbl.data = &new_value; + else + tbl.data = &net->sctp.rto_max; + ret = proc_dointvec(&tbl, write, buffer, lenp, ppos); + if (write) { + if (ret || new_value > max || new_value < min) + return -EINVAL; + net->sctp.rto_max = new_value; + } + return ret; +} + int sctp_sysctl_net_register(struct net *net) { struct ctl_table *table; -- cgit v0.10.2 From b486b2289e40797e386a18048a66b535206a463b Mon Sep 17 00:00:00 2001 From: wangweidong Date: Wed, 11 Dec 2013 09:50:40 +0800 Subject: sctp: fix up a spacing fix up spacing of proc_sctp_do_hmac_alg for according to the proc_sctp_do_rto_min[max] in sysctl.c Suggested-by: Daniel Borkmann Signed-off-by: Wang Weidong Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c index 43b5e32..b0565af 100644 --- a/net/sctp/sysctl.c +++ b/net/sctp/sysctl.c @@ -56,10 +56,8 @@ extern long sysctl_sctp_mem[3]; extern int sysctl_sctp_rmem[3]; extern int sysctl_sctp_wmem[3]; -static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, - int write, +static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, - loff_t *ppos); static int proc_sctp_do_rto_min(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, @@ -301,8 +299,7 @@ static struct ctl_table sctp_net_table[] = { { /* sentinel */ } }; -static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, - int write, +static int proc_sctp_do_hmac_alg(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { -- cgit v0.10.2 From 8afdd99a1315e759de04ad6e2344f0c5f17ecb1b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 10 Dec 2013 18:07:23 -0800 Subject: udp: ipv4: fix an use after free in __udp4_lib_rcv() Dave Jones reported a use after free in UDP stack : [ 5059.434216] ========================= [ 5059.434314] [ BUG: held lock freed! ] [ 5059.434420] 3.13.0-rc3+ #9 Not tainted [ 5059.434520] ------------------------- [ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there! [ 5059.434815] (slock-AF_INET){+.-...}, at: [] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435012] 3 locks held by named/863: [ 5059.435086] #0: (rcu_read_lock){.+.+..}, at: [] __netif_receive_skb_core+0x11d/0x940 [ 5059.435295] #1: (rcu_read_lock){.+.+..}, at: [] ip_local_deliver_finish+0x3e/0x410 [ 5059.435500] #2: (slock-AF_INET){+.-...}, at: [] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435734] stack backtrace: [ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365] [ 5059.436052] Hardware name: /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010 [ 5059.436223] 0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0 [ 5059.436390] ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0 [ 5059.436554] ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48 [ 5059.436718] Call Trace: [ 5059.436769] [] dump_stack+0x4d/0x66 [ 5059.436904] [] debug_check_no_locks_freed+0x15a/0x160 [ 5059.437037] [] ? __sk_free+0x110/0x230 [ 5059.437147] [] kmem_cache_free+0x6a/0x150 [ 5059.437260] [] __sk_free+0x110/0x230 [ 5059.437364] [] sk_free+0x19/0x20 [ 5059.437463] [] sock_edemux+0x25/0x40 [ 5059.437567] [] sock_queue_rcv_skb+0x81/0x280 [ 5059.437685] [] ? udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.437805] [] __udp_queue_rcv_skb+0x42/0x240 [ 5059.437925] [] ? _raw_spin_lock+0x65/0x70 [ 5059.438038] [] udp_queue_rcv_skb+0x26b/0x4b0 [ 5059.438155] [] __udp4_lib_rcv+0x152/0xb00 [ 5059.438269] [] udp_rcv+0x15/0x20 [ 5059.438367] [] ip_local_deliver_finish+0x10f/0x410 [ 5059.438492] [] ? ip_local_deliver_finish+0x3e/0x410 [ 5059.438621] [] ip_local_deliver+0x43/0x80 [ 5059.438733] [] ip_rcv_finish+0x140/0x5a0 [ 5059.438843] [] ip_rcv+0x296/0x3f0 [ 5059.438945] [] __netif_receive_skb_core+0x742/0x940 [ 5059.439074] [] ? __netif_receive_skb_core+0x11d/0x940 [ 5059.442231] [] ? trace_hardirqs_on+0xd/0x10 [ 5059.442231] [] __netif_receive_skb+0x13/0x60 [ 5059.442231] [] netif_receive_skb+0x1e/0x1f0 [ 5059.442231] [] napi_gro_receive+0x70/0xa0 [ 5059.442231] [] rtl8169_poll+0x166/0x700 [r8169] [ 5059.442231] [] net_rx_action+0x129/0x1e0 [ 5059.442231] [] __do_softirq+0xed/0x240 [ 5059.442231] [] irq_exit+0x125/0x140 [ 5059.442231] [] do_IRQ+0x51/0xc0 [ 5059.442231] [] common_interrupt+0x6f/0x6f We need to keep a reference on the socket, by using skb_steal_sock() at the right place. Note that another patch is needed to fix a race in udp_sk_rx_dst_set(), as we hold no lock protecting the dst. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Reported-by: Dave Jones Signed-off-by: Eric Dumazet Cc: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 44f6a20..2e2aecb 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -560,15 +560,11 @@ static inline struct sock *__udp4_lib_lookup_skb(struct sk_buff *skb, __be16 sport, __be16 dport, struct udp_table *udptable) { - struct sock *sk; const struct iphdr *iph = ip_hdr(skb); - if (unlikely(sk = skb_steal_sock(skb))) - return sk; - else - return __udp4_lib_lookup(dev_net(skb_dst(skb)->dev), iph->saddr, sport, - iph->daddr, dport, inet_iif(skb), - udptable); + return __udp4_lib_lookup(dev_net(skb_dst(skb)->dev), iph->saddr, sport, + iph->daddr, dport, inet_iif(skb), + udptable); } struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport, @@ -1739,15 +1735,15 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, if (udp4_csum_init(skb, uh, proto)) goto csum_error; - if (skb->sk) { + sk = skb_steal_sock(skb); + if (sk) { int ret; - sk = skb->sk; if (unlikely(sk->sk_rx_dst == NULL)) udp_sk_rx_dst_set(sk, skb); ret = udp_queue_rcv_skb(sk, skb); - + sock_put(sk); /* a return value > 0 means to resubmit the input, but * it wants the return to be -protocol, or 0 */ -- cgit v0.10.2 From c9a6338aecdb92f9d015ecc26d203e54250bebbb Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 10 Dec 2013 22:46:34 +0200 Subject: ALSA: hda - hdmi: Fix IEC958 ctl indexes for some simple HDMI devices In case a single HDA card has both HDMI and S/PDIF outputs, the S/PDIF outputs will have their IEC958 controls created starting from index 16 and the HDMI controls will be created starting from index 0. However, HDMI simple_playback_build_controls() as used by old VIA and NVIDIA codecs incorrectly requests the IEC958 controls to be created with an S/PDIF type instead of HDMI. In case the card has other codecs that have HDMI outputs, the controls will be created with wrong index=16, causing them to e.g. be unreachable by the ALSA "hdmi" alias. Fix that by making simple_playback_build_controls() request controls with HDMI indexes. Not many cards have an affected configuration, but e.g. ASUS M3N78-VM contains an integrated NVIDIA HDA "card" with: - a VIA codec that has, among others, an S/PDIF pin incorrectly labelled as an HDMI pin, and - an NVIDIA MCP7x HDMI codec. Reported-by: MysterX on #openelec Tested-by: MysterX on #openelec Signed-off-by: Anssi Hannula Cc: # 3.8+ Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index c4a66ef..f281c80 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2337,8 +2337,9 @@ static int simple_playback_build_controls(struct hda_codec *codec) int err; per_cvt = get_cvt(spec, 0); - err = snd_hda_create_spdif_out_ctls(codec, per_cvt->cvt_nid, - per_cvt->cvt_nid); + err = snd_hda_create_dig_out_ctls(codec, per_cvt->cvt_nid, + per_cvt->cvt_nid, + HDA_PCM_TYPE_HDMI); if (err < 0) return err; return simple_hdmi_build_jack(codec, 0); -- cgit v0.10.2 From 7dca4bc6f34829db50d9723ac3bcd1c6518ee6c3 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Wed, 11 Dec 2013 11:41:31 +0800 Subject: ALSA: hda - One more Dell headset detection quirk On the Dell machines with codec whose Subsystem Id is 0x10280624, no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/bugs/1259790 Cc: David Henningsson Cc: stable@vger.kernel.org Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index adba518..34de5dc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5043,6 +5043,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0624, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0628, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), -- cgit v0.10.2 From 3690739b013504d33fe9348dd45f6b126aa370fb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Dec 2013 17:29:26 +0100 Subject: ALSA: hda - Add static DAC/pin mapping for AD1986A codec AD1986A codec is a pretty old codec and has really many hidden restrictions. One of such is that each DAC is dedicated to certain pin although there are possible connections. Currently, the generic parser tries to assign individual DACs as much as possible, and this lead to two bad situations: connections where the sound actually doesn't work, and connections conflicting other channels. We may fix this by trying to find the best connections more harder, but as of now, it's easier to give some hints for paired DAC/pin connections and honor them if available, since such a hint is needed only for specific codecs (right now only AD1986A, and there will be unlikely any others in future). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 249cd46..c7f6d1c 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -474,6 +474,20 @@ static void invalidate_nid_path(struct hda_codec *codec, int idx) memset(path, 0, sizeof(*path)); } +/* return a DAC if paired to the given pin by codec driver */ +static hda_nid_t get_preferred_dac(struct hda_codec *codec, hda_nid_t pin) +{ + struct hda_gen_spec *spec = codec->spec; + const hda_nid_t *list = spec->preferred_dacs; + + if (!list) + return 0; + for (; *list; list += 2) + if (*list == pin) + return list[1]; + return 0; +} + /* look for an empty DAC slot */ static hda_nid_t look_for_dac(struct hda_codec *codec, hda_nid_t pin, bool is_digital) @@ -1192,7 +1206,14 @@ static int try_assign_dacs(struct hda_codec *codec, int num_outs, continue; } - dacs[i] = look_for_dac(codec, pin, false); + dacs[i] = get_preferred_dac(codec, pin); + if (dacs[i]) { + if (is_dac_already_used(codec, dacs[i])) + badness += bad->shared_primary; + } + + if (!dacs[i]) + dacs[i] = look_for_dac(codec, pin, false); if (!dacs[i] && !i) { /* try to steal the DAC of surrounds for the front */ for (j = 1; j < num_outs; j++) { diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h index 7e45cb4..0929a06 100644 --- a/sound/pci/hda/hda_generic.h +++ b/sound/pci/hda/hda_generic.h @@ -249,6 +249,9 @@ struct hda_gen_spec { const struct badness_table *main_out_badness; const struct badness_table *extra_out_badness; + /* preferred pin/DAC pairs; an array of paired NIDs */ + const hda_nid_t *preferred_dacs; + /* loopback mixing mode */ bool aamix_mode; diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index cac015b..699262a 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -340,6 +340,14 @@ static int patch_ad1986a(struct hda_codec *codec) { int err; struct ad198x_spec *spec; + static hda_nid_t preferred_pairs[] = { + 0x1a, 0x03, + 0x1b, 0x03, + 0x1c, 0x04, + 0x1d, 0x05, + 0x1e, 0x03, + 0 + }; err = alloc_ad_spec(codec); if (err < 0) @@ -360,6 +368,8 @@ static int patch_ad1986a(struct hda_codec *codec) * So, let's disable the shared stream. */ spec->gen.multiout.no_share_stream = 1; + /* give fixed DAC/pin pairs */ + spec->gen.preferred_dacs = preferred_pairs; /* AD1986A can't manage the dynamic pin on/off smoothly */ spec->gen.auto_mute_via_amp = 1; -- cgit v0.10.2 From f01b3926ee645974f549f4a6921268142047717c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Sun, 8 Dec 2013 16:52:31 +0000 Subject: netfilter: SYNPROXY target: restrict to INPUT/FORWARD Fix a crash in synproxy_send_tcp() when using the SYNPROXY target in the PREROUTING chain caused by missing routing information. Reported-by: Nicki P. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/ipt_SYNPROXY.c b/net/ipv4/netfilter/ipt_SYNPROXY.c index f13bd91..a313c3f 100644 --- a/net/ipv4/netfilter/ipt_SYNPROXY.c +++ b/net/ipv4/netfilter/ipt_SYNPROXY.c @@ -423,6 +423,7 @@ static void synproxy_tg4_destroy(const struct xt_tgdtor_param *par) static struct xt_target synproxy_tg4_reg __read_mostly = { .name = "SYNPROXY", .family = NFPROTO_IPV4, + .hooks = (1 << NF_INET_LOCAL_IN) | (1 << NF_INET_FORWARD), .target = synproxy_tg4, .targetsize = sizeof(struct xt_synproxy_info), .checkentry = synproxy_tg4_check, diff --git a/net/ipv6/netfilter/ip6t_SYNPROXY.c b/net/ipv6/netfilter/ip6t_SYNPROXY.c index f78f41a..a0d1727 100644 --- a/net/ipv6/netfilter/ip6t_SYNPROXY.c +++ b/net/ipv6/netfilter/ip6t_SYNPROXY.c @@ -446,6 +446,7 @@ static void synproxy_tg6_destroy(const struct xt_tgdtor_param *par) static struct xt_target synproxy_tg6_reg __read_mostly = { .name = "SYNPROXY", .family = NFPROTO_IPV6, + .hooks = (1 << NF_INET_LOCAL_IN) | (1 << NF_INET_FORWARD), .target = synproxy_tg6, .targetsize = sizeof(struct xt_synproxy_info), .checkentry = synproxy_tg6_check, -- cgit v0.10.2 From 6c719faca2aceca72f1bf5b1645c1734ed3e9447 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 10 Dec 2013 13:20:59 +0100 Subject: drm/i915: don't update the dri1 breadcrumb with modesetting The update is horribly racy since it doesn't protect at all against concurrent closing of the master fd. And it can't really since that requires us to grab a mutex. Instead of jumping through hoops and offloading this to a worker thread just block this bit of code for the modesetting driver. Note that the race is fairly easy to hit since we call the breadcrumb function for any interrupt. So the vblank interrupt (which usually keeps going for a bit) is enough. But even if we'd block this and only update the breadcrumb for user interrupts from the CS we could hit this race with kms/gem userspace: If a non-master is waiting somewhere (and hence has interrupts enabled) and the master closes its fd (probably due to crashing). v2: Add a code comment to explain why fixing this for real isn't really worth it. Also improve the commit message a bit. v3: Fix the spelling in the comment. Reported-by: Eugene Shatokhin Cc: Eugene Shatokhin Cc: stable@vger.kernel.org Acked-by: Chris Wilson Tested-by: Eugene Shatokhin Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 197db09..5c64842 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -83,6 +83,14 @@ void i915_update_dri1_breadcrumb(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; + /* + * The dri breadcrumb update races against the drm master disappearing. + * Instead of trying to fix this (this is by far not the only ums issue) + * just don't do the update in kms mode. + */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + if (dev->primary->master) { master_priv = dev->primary->master->driver_priv; if (master_priv->sarea_priv) -- cgit v0.10.2 From 8e8339a3a1069141985daaa2521ba304509ddecd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 11 Dec 2013 11:09:53 +0100 Subject: sched: Initialize power_orig for overlapping groups Yinghai reported that he saw a /0 in sg_capacity on his EX parts. Make sure to always initialize power_orig now that we actually use it. Ideally build_sched_domains() -> init_sched_groups_power() would also initialize this; but for some yet unexplained reason some setups seem to miss updates there. Reported-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-l8ng2m9uml6fhibln8wqpom7@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e85cda2..19af58f 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5112,6 +5112,7 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) * die on a /0 trap. */ sg->sgp->power = SCHED_POWER_SCALE * cpumask_weight(sg_span); + sg->sgp->power_orig = sg->sgp->power; /* * Make sure the first group of this domain contains the -- cgit v0.10.2 From ba1f14fbe70965ae0fb1655a5275a62723f65b77 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 28 Nov 2013 14:26:41 +0100 Subject: sched: Remove PREEMPT_NEED_RESCHED from generic code While hunting a preemption issue with Alexander, Ben noticed that the currently generic PREEMPT_NEED_RESCHED stuff is horribly broken for load-store architectures. We currently rely on the IPI to fold TIF_NEED_RESCHED into PREEMPT_NEED_RESCHED, but when this IPI lands while we already have a load for the preempt-count but before the store, the store will erase the PREEMPT_NEED_RESCHED change. The current preempt-count only works on load-store archs because interrupts are assumed to be completely balanced wrt their preempt_count fiddling; the previous preempt_count load will match the preempt_count state after the interrupt and therefore nothing gets lost. This patch removes the PREEMPT_NEED_RESCHED usage from generic code and pushes it into x86 arch code; the generic code goes back to relying on TIF_NEED_RESCHED. Boot tested on x86_64 and compile tested on ppc64. Reported-by: Benjamin Herrenschmidt Reported-and-Tested-by: Alexander Graf Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20131128132641.GP10022@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h index 8729723..c8b0519 100644 --- a/arch/x86/include/asm/preempt.h +++ b/arch/x86/include/asm/preempt.h @@ -8,6 +8,12 @@ DECLARE_PER_CPU(int, __preempt_count); /* + * We use the PREEMPT_NEED_RESCHED bit as an inverted NEED_RESCHED such + * that a decrement hitting 0 means we can and should reschedule. + */ +#define PREEMPT_ENABLED (0 + PREEMPT_NEED_RESCHED) + +/* * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users * that think a non-zero value indicates we cannot preempt. */ @@ -74,6 +80,11 @@ static __always_inline void __preempt_count_sub(int val) __this_cpu_add_4(__preempt_count, -val); } +/* + * Because we keep PREEMPT_NEED_RESCHED set when we do _not_ need to reschedule + * a decrement which hits zero means we have no preempt_count and should + * reschedule. + */ static __always_inline bool __preempt_count_dec_and_test(void) { GEN_UNARY_RMWcc("decl", __preempt_count, __percpu_arg(0), "e"); diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h index ddf2b42..1cd3f5d 100644 --- a/include/asm-generic/preempt.h +++ b/include/asm-generic/preempt.h @@ -3,13 +3,11 @@ #include -/* - * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users - * that think a non-zero value indicates we cannot preempt. - */ +#define PREEMPT_ENABLED (0) + static __always_inline int preempt_count(void) { - return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED; + return current_thread_info()->preempt_count; } static __always_inline int *preempt_count_ptr(void) @@ -17,11 +15,6 @@ static __always_inline int *preempt_count_ptr(void) return ¤t_thread_info()->preempt_count; } -/* - * We now loose PREEMPT_NEED_RESCHED and cause an extra reschedule; however the - * alternative is loosing a reschedule. Better schedule too often -- also this - * should be a very rare operation. - */ static __always_inline void preempt_count_set(int pc) { *preempt_count_ptr() = pc; @@ -41,28 +34,17 @@ static __always_inline void preempt_count_set(int pc) task_thread_info(p)->preempt_count = PREEMPT_ENABLED; \ } while (0) -/* - * We fold the NEED_RESCHED bit into the preempt count such that - * preempt_enable() can decrement and test for needing to reschedule with a - * single instruction. - * - * We invert the actual bit, so that when the decrement hits 0 we know we both - * need to resched (the bit is cleared) and can resched (no preempt count). - */ - static __always_inline void set_preempt_need_resched(void) { - *preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED; } static __always_inline void clear_preempt_need_resched(void) { - *preempt_count_ptr() |= PREEMPT_NEED_RESCHED; } static __always_inline bool test_preempt_need_resched(void) { - return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED); + return false; } /* @@ -81,7 +63,12 @@ static __always_inline void __preempt_count_sub(int val) static __always_inline bool __preempt_count_dec_and_test(void) { - return !--*preempt_count_ptr(); + /* + * Because of load-store architectures cannot do per-cpu atomic + * operations; we cannot use PREEMPT_NEED_RESCHED because it might get + * lost. + */ + return !--*preempt_count_ptr() && tif_need_resched(); } /* @@ -89,7 +76,7 @@ static __always_inline bool __preempt_count_dec_and_test(void) */ static __always_inline bool should_resched(void) { - return unlikely(!*preempt_count_ptr()); + return unlikely(!preempt_count() && tif_need_resched()); } #ifdef CONFIG_PREEMPT diff --git a/include/linux/sched.h b/include/linux/sched.h index 768b037..96d674b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -440,8 +440,6 @@ struct task_cputime { .sum_exec_runtime = 0, \ } -#define PREEMPT_ENABLED (PREEMPT_NEED_RESCHED) - #ifdef CONFIG_PREEMPT_COUNT #define PREEMPT_DISABLED (1 + PREEMPT_ENABLED) #else -- cgit v0.10.2 From be5e610c0fd6ef772cafb9e0bd4128134804aef3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Nov 2013 18:27:06 +0100 Subject: math64: Add mul_u64_u32_shr() Introduce mul_u64_u32_shr() as proposed by Andy a while back; it allows using 64x64->128 muls on 64bit archs and recent GCC which defines __SIZEOF_INT128__ and __int128. (This new method will be used by the scheduler.) Signed-off-by: Peter Zijlstra Cc: fweisbec@gmail.com Cc: Andy Lutomirski Cc: Linus Torvalds Link: http://lkml.kernel.org/n/tip-hxjoeuzmrcaumR0uZwjpe2pv@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e903c71..0952ecd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -26,6 +26,7 @@ config X86 select HAVE_AOUT if X86_32 select HAVE_UNSTABLE_SCHED_CLOCK select ARCH_SUPPORTS_NUMA_BALANCING + select ARCH_SUPPORTS_INT128 if X86_64 select ARCH_WANTS_PROT_NUMA_PROT_NONE select HAVE_IDE select HAVE_OPROFILE diff --git a/include/linux/math64.h b/include/linux/math64.h index 69ed5f5..c45c089 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -133,4 +133,34 @@ __iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) return ret; } +#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__) + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + return (u64)(((unsigned __int128)a * mul) >> shift); +} +#endif /* mul_u64_u32_shr */ + +#else + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + u32 ah, al; + u64 ret; + + al = a; + ah = a >> 32; + + ret = ((u64)al * mul) >> shift; + if (ah) + ret += ((u64)ah * mul) << (32 - shift); + + return ret; +} +#endif /* mul_u64_u32_shr */ + +#endif + #endif /* _LINUX_MATH64_H */ diff --git a/init/Kconfig b/init/Kconfig index 79383d3..4e5d96a 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -809,6 +809,12 @@ config GENERIC_SCHED_CLOCK config ARCH_SUPPORTS_NUMA_BALANCING bool +# +# For architectures that know their GCC __int128 support is sound +# +config ARCH_SUPPORTS_INT128 + bool + # For architectures that (ab)use NUMA to represent different memory regions # all cpu-local but of different latencies, such as SuperH. # -- cgit v0.10.2 From 9dbdb155532395ba000c5d5d187658b0e17e529f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Nov 2013 18:27:06 +0100 Subject: sched/fair: Rework sched_fair time accounting Christian suffers from a bad BIOS that wrecks his i5's TSC sync. This results in him occasionally seeing time going backwards - which crashes the scheduler ... Most of our time accounting can actually handle that except the most common one; the tick time update of sched_fair. There is a further problem with that code; previously we assumed that because we get a tick every TICK_NSEC our time delta could never exceed 32bits and math was simpler. However, ever since Frederic managed to get NO_HZ_FULL merged; this is no longer the case since now a task can run for a long time indeed without getting a tick. It only takes about ~4.2 seconds to overflow our u32 in nanoseconds. This means we not only need to better deal with time going backwards; but also means we need to be able to deal with large deltas. This patch reworks the entire code and uses mul_u64_u32_shr() as proposed by Andy a long while ago. We express our virtual time scale factor in a u32 multiplier and shift right and the 32bit mul_u64_u32_shr() implementation reduces to a single 32x32->64 multiply if the time delta is still short (common case). For 64bit a 64x64->128 multiply can be used if ARCH_SUPPORTS_INT128. Reported-and-Tested-by: Christian Engelmayer Signed-off-by: Peter Zijlstra Cc: fweisbec@gmail.com Cc: Paul Turner Cc: Stanislaw Gruszka Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/20131118172706.GI3866@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 96d674b..53f97eb 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -930,7 +930,8 @@ struct pipe_inode_info; struct uts_namespace; struct load_weight { - unsigned long weight, inv_weight; + unsigned long weight; + u32 inv_weight; }; struct sched_avg { diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index fd773ad..9030da7 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -178,59 +178,61 @@ void sched_init_granularity(void) update_sysctl(); } -#if BITS_PER_LONG == 32 -# define WMULT_CONST (~0UL) -#else -# define WMULT_CONST (1UL << 32) -#endif - +#define WMULT_CONST (~0U) #define WMULT_SHIFT 32 -/* - * Shift right and round: - */ -#define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y)) +static void __update_inv_weight(struct load_weight *lw) +{ + unsigned long w; + + if (likely(lw->inv_weight)) + return; + + w = scale_load_down(lw->weight); + + if (BITS_PER_LONG > 32 && unlikely(w >= WMULT_CONST)) + lw->inv_weight = 1; + else if (unlikely(!w)) + lw->inv_weight = WMULT_CONST; + else + lw->inv_weight = WMULT_CONST / w; +} /* - * delta *= weight / lw + * delta_exec * weight / lw.weight + * OR + * (delta_exec * (weight * lw->inv_weight)) >> WMULT_SHIFT + * + * Either weight := NICE_0_LOAD and lw \e prio_to_wmult[], in which case + * we're guaranteed shift stays positive because inv_weight is guaranteed to + * fit 32 bits, and NICE_0_LOAD gives another 10 bits; therefore shift >= 22. + * + * Or, weight =< lw.weight (because lw.weight is the runqueue weight), thus + * weight/lw.weight <= 1, and therefore our shift will also be positive. */ -static unsigned long -calc_delta_mine(unsigned long delta_exec, unsigned long weight, - struct load_weight *lw) +static u64 __calc_delta(u64 delta_exec, unsigned long weight, struct load_weight *lw) { - u64 tmp; + u64 fact = scale_load_down(weight); + int shift = WMULT_SHIFT; - /* - * weight can be less than 2^SCHED_LOAD_RESOLUTION for task group sched - * entities since MIN_SHARES = 2. Treat weight as 1 if less than - * 2^SCHED_LOAD_RESOLUTION. - */ - if (likely(weight > (1UL << SCHED_LOAD_RESOLUTION))) - tmp = (u64)delta_exec * scale_load_down(weight); - else - tmp = (u64)delta_exec; + __update_inv_weight(lw); - if (!lw->inv_weight) { - unsigned long w = scale_load_down(lw->weight); - - if (BITS_PER_LONG > 32 && unlikely(w >= WMULT_CONST)) - lw->inv_weight = 1; - else if (unlikely(!w)) - lw->inv_weight = WMULT_CONST; - else - lw->inv_weight = WMULT_CONST / w; + if (unlikely(fact >> 32)) { + while (fact >> 32) { + fact >>= 1; + shift--; + } } - /* - * Check whether we'd overflow the 64-bit multiplication: - */ - if (unlikely(tmp > WMULT_CONST)) - tmp = SRR(SRR(tmp, WMULT_SHIFT/2) * lw->inv_weight, - WMULT_SHIFT/2); - else - tmp = SRR(tmp * lw->inv_weight, WMULT_SHIFT); + /* hint to use a 32x32->64 mul */ + fact = (u64)(u32)fact * lw->inv_weight; + + while (fact >> 32) { + fact >>= 1; + shift--; + } - return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX); + return mul_u64_u32_shr(delta_exec, fact, shift); } @@ -443,7 +445,7 @@ find_matching_se(struct sched_entity **se, struct sched_entity **pse) #endif /* CONFIG_FAIR_GROUP_SCHED */ static __always_inline -void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, unsigned long delta_exec); +void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, u64 delta_exec); /************************************************************** * Scheduling class tree data structure manipulation methods: @@ -612,11 +614,10 @@ int sched_proc_update_handler(struct ctl_table *table, int write, /* * delta /= w */ -static inline unsigned long -calc_delta_fair(unsigned long delta, struct sched_entity *se) +static inline u64 calc_delta_fair(u64 delta, struct sched_entity *se) { if (unlikely(se->load.weight != NICE_0_LOAD)) - delta = calc_delta_mine(delta, NICE_0_LOAD, &se->load); + delta = __calc_delta(delta, NICE_0_LOAD, &se->load); return delta; } @@ -665,7 +666,7 @@ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se) update_load_add(&lw, se->load.weight); load = &lw; } - slice = calc_delta_mine(slice, se->load.weight, load); + slice = __calc_delta(slice, se->load.weight, load); } return slice; } @@ -703,47 +704,32 @@ void init_task_runnable_average(struct task_struct *p) #endif /* - * Update the current task's runtime statistics. Skip current tasks that - * are not in our scheduling class. + * Update the current task's runtime statistics. */ -static inline void -__update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr, - unsigned long delta_exec) -{ - unsigned long delta_exec_weighted; - - schedstat_set(curr->statistics.exec_max, - max((u64)delta_exec, curr->statistics.exec_max)); - - curr->sum_exec_runtime += delta_exec; - schedstat_add(cfs_rq, exec_clock, delta_exec); - delta_exec_weighted = calc_delta_fair(delta_exec, curr); - - curr->vruntime += delta_exec_weighted; - update_min_vruntime(cfs_rq); -} - static void update_curr(struct cfs_rq *cfs_rq) { struct sched_entity *curr = cfs_rq->curr; u64 now = rq_clock_task(rq_of(cfs_rq)); - unsigned long delta_exec; + u64 delta_exec; if (unlikely(!curr)) return; - /* - * Get the amount of time the current task was running - * since the last time we changed load (this cannot - * overflow on 32 bits): - */ - delta_exec = (unsigned long)(now - curr->exec_start); - if (!delta_exec) + delta_exec = now - curr->exec_start; + if (unlikely((s64)delta_exec <= 0)) return; - __update_curr(cfs_rq, curr, delta_exec); curr->exec_start = now; + schedstat_set(curr->statistics.exec_max, + max(delta_exec, curr->statistics.exec_max)); + + curr->sum_exec_runtime += delta_exec; + schedstat_add(cfs_rq, exec_clock, delta_exec); + + curr->vruntime += calc_delta_fair(delta_exec, curr); + update_min_vruntime(cfs_rq); + if (entity_is_task(curr)) { struct task_struct *curtask = task_of(curr); @@ -3015,8 +3001,7 @@ static void expire_cfs_rq_runtime(struct cfs_rq *cfs_rq) } } -static void __account_cfs_rq_runtime(struct cfs_rq *cfs_rq, - unsigned long delta_exec) +static void __account_cfs_rq_runtime(struct cfs_rq *cfs_rq, u64 delta_exec) { /* dock delta_exec before expiring quota (as it could span periods) */ cfs_rq->runtime_remaining -= delta_exec; @@ -3034,7 +3019,7 @@ static void __account_cfs_rq_runtime(struct cfs_rq *cfs_rq, } static __always_inline -void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, unsigned long delta_exec) +void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, u64 delta_exec) { if (!cfs_bandwidth_used() || !cfs_rq->runtime_enabled) return; @@ -3574,8 +3559,7 @@ static inline u64 cfs_rq_clock_task(struct cfs_rq *cfs_rq) return rq_clock_task(rq_of(cfs_rq)); } -static void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, - unsigned long delta_exec) {} +static void account_cfs_rq_runtime(struct cfs_rq *cfs_rq, u64 delta_exec) {} static void check_cfs_rq_runtime(struct cfs_rq *cfs_rq) {} static void check_enqueue_throttle(struct cfs_rq *cfs_rq) {} static __always_inline void return_cfs_rq_runtime(struct cfs_rq *cfs_rq) {} -- cgit v0.10.2 From f0b75693cbb26439ba959ba7d3b4f43e2fcf3da6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 11 Dec 2013 10:40:59 -0700 Subject: MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers Add entries for PCI host controller drivers in drivers/pci/host/. Signed-off-by: Mohit Kumar # DESIGNWARE Signed-off-by: Pratyush Anand # DESIGNWARE Signed-off-by: Bjorn Helgaas Acked-by: Simon Horman # R-CAR Double-Plus-Acked-by: Jason Cooper # MVEBU Acked-by: Jingoo Han Acked-by: Thierry Reding Acked-by: Thomas Petazzoni Acked-by: Richard Zhu # IMX6 diff --git a/MAINTAINERS b/MAINTAINERS index 8285ed4..624e651 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6449,19 +6449,52 @@ F: drivers/pci/ F: include/linux/pci* F: arch/x86/pci/ +PCI DRIVER FOR IMX6 +M: Richard Zhu +M: Shawn Guo +L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/pci/host/*imx6* + +PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support) +M: Thomas Petazzoni +M: Jason Cooper +L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/pci/host/*mvebu* + PCI DRIVER FOR NVIDIA TEGRA M: Thierry Reding L: linux-tegra@vger.kernel.org +L: linux-pci@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt F: drivers/pci/host/pci-tegra.c +PCI DRIVER FOR RENESAS R-CAR +M: Simon Horman +L: linux-pci@vger.kernel.org +L: linux-sh@vger.kernel.org +S: Maintained +F: drivers/pci/host/*rcar* + PCI DRIVER FOR SAMSUNG EXYNOS M: Jingoo Han L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained F: drivers/pci/host/pci-exynos.c +PCI DRIVER FOR SYNOPSIS DESIGNWARE +M: Mohit Kumar +M: Jingoo Han +L: linux-pci@vger.kernel.org +S: Maintained +F: drivers/pci/host/*designware* + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org -- cgit v0.10.2 From 4bd7b5127bd02c12c1cc837a7a0b6ce295eb2505 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 10 Dec 2013 02:20:41 +0300 Subject: micrel: add support for KSZ8041RNLI Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov Tested-by: Geert Uytterhoeven Signed-off-by: David S. Miller diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 3ae28f4..26fa05a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -336,6 +336,21 @@ static struct phy_driver ksphy_driver[] = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { + .phy_id = PHY_ID_KSZ8041RNLI, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KSZ8041RNLI", + .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = PHY_ID_KSZ8051, .phy_id_mask = 0x00fffff0, .name = "Micrel KSZ8051", diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index ad05ce6..2e5b194 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -22,6 +22,8 @@ #define PHY_ID_KSZ8021 0x00221555 #define PHY_ID_KSZ8031 0x00221556 #define PHY_ID_KSZ8041 0x00221510 +/* undocumented */ +#define PHY_ID_KSZ8041RNLI 0x00221537 #define PHY_ID_KSZ8051 0x00221550 /* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */ #define PHY_ID_KSZ8001 0x0022161A -- cgit v0.10.2 From cc106e441a63bec3b1cb72948df82ea15945c449 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 10 Dec 2013 14:59:27 +0800 Subject: net: sched: tbf: fix the calculation of max_size Current max_size is caluated from rate table. Now, the rate table has been replaced and it's wrong to caculate max_size based on this rate table. It can lead wrong calculation of max_size. The burst in kernel may be lower than user asked, because burst may gets some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s") and it seems we cannot avoid this loss. Burst's value(max_size) based on rate table may be equal user asked. If a packet's length is max_size, this packet will be stalled in tbf_dequeue() because its length is above the burst in kernel so that it cannot get enough tokens. The max_size guards against enqueuing packet sizes above q->buffer "time" in tbf_enqueue(). To make consistent with the calculation of tokens, this patch add a helper psched_ns_t2l() to calculate burst(max_size) directly to fix this problem. After this fix, we can support to using 64bit rates to calculate burst as well. Signed-off-by: Yang Yingliang Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index a609005..a44928c 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -118,6 +118,30 @@ struct tbf_sched_data { }; +/* Time to Length, convert time in ns to length in bytes + * to determinate how many bytes can be sent in given time. + */ +static u64 psched_ns_t2l(const struct psched_ratecfg *r, + u64 time_in_ns) +{ + /* The formula is : + * len = (time_in_ns * r->rate_bytes_ps) / NSEC_PER_SEC + */ + u64 len = time_in_ns * r->rate_bytes_ps; + + do_div(len, NSEC_PER_SEC); + + if (unlikely(r->linklayer == TC_LINKLAYER_ATM)) + len = (len / 53) * 48; + + if (len > r->overhead) + len -= r->overhead; + else + len = 0; + + return len; +} + /* * Return length of individual segments of a gso packet, * including all headers (MAC, IP, TCP/UDP) @@ -289,10 +313,11 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) struct tbf_sched_data *q = qdisc_priv(sch); struct nlattr *tb[TCA_TBF_MAX + 1]; struct tc_tbf_qopt *qopt; - struct qdisc_rate_table *rtab = NULL; - struct qdisc_rate_table *ptab = NULL; struct Qdisc *child = NULL; - int max_size, n; + struct psched_ratecfg rate; + struct psched_ratecfg peak; + u64 max_size; + s64 buffer, mtu; u64 rate64 = 0, prate64 = 0; err = nla_parse_nested(tb, TCA_TBF_MAX, opt, tbf_policy); @@ -304,38 +329,13 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) goto done; qopt = nla_data(tb[TCA_TBF_PARMS]); - rtab = qdisc_get_rtab(&qopt->rate, tb[TCA_TBF_RTAB]); - if (rtab == NULL) - goto done; - - if (qopt->peakrate.rate) { - if (qopt->peakrate.rate > qopt->rate.rate) - ptab = qdisc_get_rtab(&qopt->peakrate, tb[TCA_TBF_PTAB]); - if (ptab == NULL) - goto done; - } - - for (n = 0; n < 256; n++) - if (rtab->data[n] > qopt->buffer) - break; - max_size = (n << qopt->rate.cell_log) - 1; - if (ptab) { - int size; - - for (n = 0; n < 256; n++) - if (ptab->data[n] > qopt->mtu) - break; - size = (n << qopt->peakrate.cell_log) - 1; - if (size < max_size) - max_size = size; - } - if (max_size < 0) - goto done; + if (qopt->rate.linklayer == TC_LINKLAYER_UNAWARE) + qdisc_put_rtab(qdisc_get_rtab(&qopt->rate, + tb[TCA_TBF_RTAB])); - if (max_size < psched_mtu(qdisc_dev(sch))) - pr_warn_ratelimited("sch_tbf: burst %u is lower than device %s mtu (%u) !\n", - max_size, qdisc_dev(sch)->name, - psched_mtu(qdisc_dev(sch))); + if (qopt->peakrate.linklayer == TC_LINKLAYER_UNAWARE) + qdisc_put_rtab(qdisc_get_rtab(&qopt->peakrate, + tb[TCA_TBF_PTAB])); if (q->qdisc != &noop_qdisc) { err = fifo_set_limit(q->qdisc, qopt->limit); @@ -349,6 +349,39 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) } } + buffer = min_t(u64, PSCHED_TICKS2NS(qopt->buffer), ~0U); + mtu = min_t(u64, PSCHED_TICKS2NS(qopt->mtu), ~0U); + + if (tb[TCA_TBF_RATE64]) + rate64 = nla_get_u64(tb[TCA_TBF_RATE64]); + psched_ratecfg_precompute(&rate, &qopt->rate, rate64); + + max_size = min_t(u64, psched_ns_t2l(&rate, buffer), ~0U); + + if (qopt->peakrate.rate) { + if (tb[TCA_TBF_PRATE64]) + prate64 = nla_get_u64(tb[TCA_TBF_PRATE64]); + psched_ratecfg_precompute(&peak, &qopt->peakrate, prate64); + if (peak.rate_bytes_ps <= rate.rate_bytes_ps) { + pr_warn_ratelimited("sch_tbf: peakrate %llu is lower than or equals to rate %llu !\n", + peak.rate_bytes_ps, rate.rate_bytes_ps); + err = -EINVAL; + goto done; + } + + max_size = min_t(u64, max_size, psched_ns_t2l(&peak, mtu)); + } + + if (max_size < psched_mtu(qdisc_dev(sch))) + pr_warn_ratelimited("sch_tbf: burst %llu is lower than device %s mtu (%u) !\n", + max_size, qdisc_dev(sch)->name, + psched_mtu(qdisc_dev(sch))); + + if (!max_size) { + err = -EINVAL; + goto done; + } + sch_tree_lock(sch); if (child) { qdisc_tree_decrease_qlen(q->qdisc, q->qdisc->q.qlen); @@ -362,13 +395,9 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->tokens = q->buffer; q->ptokens = q->mtu; - if (tb[TCA_TBF_RATE64]) - rate64 = nla_get_u64(tb[TCA_TBF_RATE64]); - psched_ratecfg_precompute(&q->rate, &rtab->rate, rate64); - if (ptab) { - if (tb[TCA_TBF_PRATE64]) - prate64 = nla_get_u64(tb[TCA_TBF_PRATE64]); - psched_ratecfg_precompute(&q->peak, &ptab->rate, prate64); + memcpy(&q->rate, &rate, sizeof(struct psched_ratecfg)); + if (qopt->peakrate.rate) { + memcpy(&q->peak, &peak, sizeof(struct psched_ratecfg)); q->peak_present = true; } else { q->peak_present = false; @@ -377,10 +406,6 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) sch_tree_unlock(sch); err = 0; done: - if (rtab) - qdisc_put_rtab(rtab); - if (ptab) - qdisc_put_rtab(ptab); return err; } -- cgit v0.10.2 From 1598f7cb4745c40467decc91ee44ec615773eb45 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 10 Dec 2013 14:59:28 +0800 Subject: net: sched: htb: fix the calculation of quantum Now, 32bit rates may be not the true rate. So use rate_bytes_ps which is from max(rate32, rate64) to calcualte quantum. Signed-off-by: Yang Yingliang Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 0e1e38b..717b210 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1477,11 +1477,22 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, sch_tree_lock(sch); } + rate64 = tb[TCA_HTB_RATE64] ? nla_get_u64(tb[TCA_HTB_RATE64]) : 0; + + ceil64 = tb[TCA_HTB_CEIL64] ? nla_get_u64(tb[TCA_HTB_CEIL64]) : 0; + + psched_ratecfg_precompute(&cl->rate, &hopt->rate, rate64); + psched_ratecfg_precompute(&cl->ceil, &hopt->ceil, ceil64); + /* it used to be a nasty bug here, we have to check that node * is really leaf before changing cl->un.leaf ! */ if (!cl->level) { - cl->quantum = hopt->rate.rate / q->rate2quantum; + u64 quantum = cl->rate.rate_bytes_ps; + + do_div(quantum, q->rate2quantum); + cl->quantum = min_t(u64, quantum, INT_MAX); + if (!hopt->quantum && cl->quantum < 1000) { pr_warning( "HTB: quantum of class %X is small. Consider r2q change.\n", @@ -1500,13 +1511,6 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - rate64 = tb[TCA_HTB_RATE64] ? nla_get_u64(tb[TCA_HTB_RATE64]) : 0; - - ceil64 = tb[TCA_HTB_CEIL64] ? nla_get_u64(tb[TCA_HTB_CEIL64]) : 0; - - psched_ratecfg_precompute(&cl->rate, &hopt->rate, rate64); - psched_ratecfg_precompute(&cl->ceil, &hopt->ceil, ceil64); - cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->cbuffer); -- cgit v0.10.2 From e6fd07c899cd719bb5517bc7f32ce03a62220351 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 11 Dec 2013 13:08:33 +0800 Subject: tun: unbreak truncated packet signalling Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by nev return a length greater than iov length in tun_put_user(). This patch fixes by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of io length. Cc: Zhi Yong Wu Cc: Michael S. Tsirkin Signed-off-by: Vlad Yasevich Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index e26cbea..7c8343a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1184,7 +1184,7 @@ static ssize_t tun_put_user(struct tun_struct *tun, { struct tun_pi pi = { 0, skb->protocol }; ssize_t total = 0; - int vlan_offset = 0; + int vlan_offset = 0, copied; if (!(tun->flags & TUN_NO_PI)) { if ((len -= sizeof(pi)) < 0) @@ -1248,6 +1248,8 @@ static ssize_t tun_put_user(struct tun_struct *tun, total += tun->vnet_hdr_sz; } + copied = total; + total += skb->len; if (!vlan_tx_tag_present(skb)) { len = min_t(int, skb->len, len); } else { @@ -1262,24 +1264,24 @@ static ssize_t tun_put_user(struct tun_struct *tun, vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto); len = min_t(int, skb->len + VLAN_HLEN, len); + total += VLAN_HLEN; copy = min_t(int, vlan_offset, len); - ret = skb_copy_datagram_const_iovec(skb, 0, iv, total, copy); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); len -= copy; - total += copy; + copied += copy; if (ret || !len) goto done; copy = min_t(int, sizeof(veth), len); - ret = memcpy_toiovecend(iv, (void *)&veth, total, copy); + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy); len -= copy; - total += copy; + copied += copy; if (ret || !len) goto done; } - skb_copy_datagram_const_iovec(skb, vlan_offset, iv, total, len); - total += len; + skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); done: tun->dev->stats.tx_packets++; -- cgit v0.10.2 From ce232ce01d61b184202bb185103d119820e1260c Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 11 Dec 2013 13:08:34 +0800 Subject: macvtap: signal truncated packets macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich Cc: Zhi Yong Wu Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Vlad Yasevich Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 957cc5c..2a89da0 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -770,7 +770,7 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, int ret; int vnet_hdr_len = 0; int vlan_offset = 0; - int copied; + int copied, total; if (q->flags & IFF_VNET_HDR) { struct virtio_net_hdr vnet_hdr; @@ -785,7 +785,8 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr))) return -EFAULT; } - copied = vnet_hdr_len; + total = copied = vnet_hdr_len; + total += skb->len; if (!vlan_tx_tag_present(skb)) len = min_t(int, skb->len, len); @@ -800,6 +801,7 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto); len = min_t(int, skb->len + VLAN_HLEN, len); + total += VLAN_HLEN; copy = min_t(int, vlan_offset, len); ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); @@ -817,10 +819,9 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, } ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); - copied += len; done: - return ret ? ret : copied; + return ret ? ret : total; } static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb, @@ -875,7 +876,7 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv, } ret = macvtap_do_read(q, iocb, iv, len, file->f_flags & O_NONBLOCK); - ret = min_t(ssize_t, ret, len); /* XXX copied from tun.c. Why? */ + ret = min_t(ssize_t, ret, len); if (ret > 0) iocb->ki_pos = ret; out: -- cgit v0.10.2 From 610438b74496b2986a9025f8e23c134cb638e338 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 11 Dec 2013 08:10:05 -0800 Subject: udp: ipv4: fix potential use after free in udp_v4_early_demux() pskb_may_pull() can reallocate skb->head, we need to move the initialization of iph and uh pointers after its call. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet Cc: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 2e2aecb..16d246a 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1909,17 +1909,20 @@ static struct sock *__udp4_lib_demux_lookup(struct net *net, void udp_v4_early_demux(struct sk_buff *skb) { - const struct iphdr *iph = ip_hdr(skb); - const struct udphdr *uh = udp_hdr(skb); + struct net *net = dev_net(skb->dev); + const struct iphdr *iph; + const struct udphdr *uh; struct sock *sk; struct dst_entry *dst; - struct net *net = dev_net(skb->dev); int dif = skb->dev->ifindex; /* validate the packet */ if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct udphdr))) return; + iph = ip_hdr(skb); + uh = udp_hdr(skb); + if (skb->pkt_type == PACKET_BROADCAST || skb->pkt_type == PACKET_MULTICAST) sk = __udp4_lib_mcast_demux_lookup(net, uh->dest, iph->daddr, -- cgit v0.10.2 From 3f823c15d53dc78b50d6f561caf36e8109df1193 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 11 Dec 2013 13:04:27 -0800 Subject: net: smc91x: Fix device tree based configuration so it's usable Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre Cc: Mark Rutland Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: David S. Miller diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b..5a41a865 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 0c9b5d9..8bf29eb 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -82,6 +82,7 @@ static const char version[] = #include #include #include +#include #include #include @@ -2184,6 +2185,15 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * } } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id smc91x_match[] = { + { .compatible = "smsc,lan91c94", }, + { .compatible = "smsc,lan91c111", }, + {}, +}; +MODULE_DEVICE_TABLE(of, smc91x_match); +#endif + /* * smc_init(void) * Input parameters: @@ -2198,6 +2208,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev); + const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; struct resource *res, *ires; @@ -2217,11 +2228,34 @@ static int smc_drv_probe(struct platform_device *pdev) */ lp = netdev_priv(ndev); + lp->cfg.flags = 0; if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); - } else { + } + +#if IS_BUILTIN(CONFIG_OF) + match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev); + if (match) { + struct device_node *np = pdev->dev.of_node; + u32 val; + + /* Combination of IO widths supported, default to 16-bit */ + if (!of_property_read_u32(np, "reg-io-width", &val)) { + if (val & 1) + lp->cfg.flags |= SMC91X_USE_8BIT; + if ((val == 0) || (val & 2)) + lp->cfg.flags |= SMC91X_USE_16BIT; + if (val & 4) + lp->cfg.flags |= SMC91X_USE_32BIT; + } else { + lp->cfg.flags |= SMC91X_USE_16BIT; + } + } +#endif + + if (!pd && !match) { lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0; @@ -2370,15 +2404,6 @@ static int smc_drv_resume(struct device *dev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id smc91x_match[] = { - { .compatible = "smsc,lan91c94", }, - { .compatible = "smsc,lan91c111", }, - {}, -}; -MODULE_DEVICE_TABLE(of, smc91x_match); -#endif - static struct dev_pm_ops smc_drv_pm_ops = { .suspend = smc_drv_suspend, .resume = smc_drv_resume, -- cgit v0.10.2 From efabcc2123f0ed47870033b8d6fc73b50d76d635 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jos=C3=A9=20Miguel=20Gon=C3=A7alves?= Date: Wed, 11 Dec 2013 11:11:13 +0000 Subject: hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some I2C bus drivers do not allow zero-length data transfers which are required to start a measurement with the HIH6130/1 sensor. Nevertheless, we can overcome this limitation by writing a zero dummy byte. This byte is ignored by the sensor and was verified to be working with the OMAP I2C bus driver in a BeagleBone board. Signed-off-by: José Miguel Gonçalves [Guenter Roeck: Simplified complexity of write_length initialization] Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c index 2dc37c7..7d68a08 100644 --- a/drivers/hwmon/hih6130.c +++ b/drivers/hwmon/hih6130.c @@ -43,6 +43,7 @@ * @last_update: time of last update (jiffies) * @temperature: cached temperature measurement value * @humidity: cached humidity measurement value + * @write_length: length for I2C measurement request */ struct hih6130 { struct device *hwmon_dev; @@ -51,6 +52,7 @@ struct hih6130 { unsigned long last_update; int temperature; int humidity; + size_t write_length; }; /** @@ -121,8 +123,15 @@ static int hih6130_update_measurements(struct i2c_client *client) */ if (time_after(jiffies, hih6130->last_update + HZ) || !hih6130->valid) { - /* write to slave address, no data, to request a measurement */ - ret = i2c_master_send(client, tmp, 0); + /* + * Write to slave address to request a measurement. + * According with the datasheet it should be with no data, but + * for systems with I2C bus drivers that do not allow zero + * length packets we write one dummy byte to allow sensor + * measurements on them. + */ + tmp[0] = 0; + ret = i2c_master_send(client, tmp, hih6130->write_length); if (ret < 0) goto out; @@ -252,6 +261,9 @@ static int hih6130_probe(struct i2c_client *client, goto fail_remove_sysfs; } + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK)) + hih6130->write_length = 1; + return 0; fail_remove_sysfs: -- cgit v0.10.2 From d52eb0d46f3606b9de9965cebb2beb2202a0dc62 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Wed, 11 Dec 2013 16:37:40 +0000 Subject: xen-netback: make sure skb linear area covers checksum field skb_partial_csum_set requires that the linear area of the skb covers the checksum field. The checksum setup code in netback was only doing that pullup in the case when the pseudo header checksum was being recalculated though. This patch makes that pullup unconditional. (I pullup the whole transport header just for simplicity; the requirement is only for the check field but in the case of UDP this is the last field in the header and in the case of TCP it's the last but one). The lack of pullup manifested as failures running Microsoft HCK network tests on a pair of Windows 8 VMs and it has been verified that this patch fixes the problem. Suggested-by: Jan Beulich Signed-off-by: Paul Durrant Cc: Wei Liu Cc: Ian Campbell Cc: David Vrabel Reviewed-by: Jan Beulich Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index acf1392..d158fc4 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1199,42 +1199,40 @@ static int checksum_setup_ip(struct xenvif *vif, struct sk_buff *skb, switch (ip_hdr(skb)->protocol) { case IPPROTO_TCP: + err = maybe_pull_tail(skb, + off + sizeof(struct tcphdr), + MAX_IP_HDR_LEN); + if (err < 0) + goto out; + if (!skb_partial_csum_set(skb, off, offsetof(struct tcphdr, check))) goto out; - if (recalculate_partial_csum) { - err = maybe_pull_tail(skb, - off + sizeof(struct tcphdr), - MAX_IP_HDR_LEN); - if (err < 0) - goto out; - + if (recalculate_partial_csum) tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, skb->len - off, IPPROTO_TCP, 0); - } break; case IPPROTO_UDP: + err = maybe_pull_tail(skb, + off + sizeof(struct udphdr), + MAX_IP_HDR_LEN); + if (err < 0) + goto out; + if (!skb_partial_csum_set(skb, off, offsetof(struct udphdr, check))) goto out; - if (recalculate_partial_csum) { - err = maybe_pull_tail(skb, - off + sizeof(struct udphdr), - MAX_IP_HDR_LEN); - if (err < 0) - goto out; - + if (recalculate_partial_csum) udp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, skb->len - off, IPPROTO_UDP, 0); - } break; default: goto out; @@ -1342,42 +1340,40 @@ static int checksum_setup_ipv6(struct xenvif *vif, struct sk_buff *skb, switch (nexthdr) { case IPPROTO_TCP: + err = maybe_pull_tail(skb, + off + sizeof(struct tcphdr), + MAX_IPV6_HDR_LEN); + if (err < 0) + goto out; + if (!skb_partial_csum_set(skb, off, offsetof(struct tcphdr, check))) goto out; - if (recalculate_partial_csum) { - err = maybe_pull_tail(skb, - off + sizeof(struct tcphdr), - MAX_IPV6_HDR_LEN); - if (err < 0) - goto out; - + if (recalculate_partial_csum) tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, skb->len - off, IPPROTO_TCP, 0); - } break; case IPPROTO_UDP: + err = maybe_pull_tail(skb, + off + sizeof(struct udphdr), + MAX_IPV6_HDR_LEN); + if (err < 0) + goto out; + if (!skb_partial_csum_set(skb, off, offsetof(struct udphdr, check))) goto out; - if (recalculate_partial_csum) { - err = maybe_pull_tail(skb, - off + sizeof(struct udphdr), - MAX_IPV6_HDR_LEN); - if (err < 0) - goto out; - + if (recalculate_partial_csum) udp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, skb->len - off, IPPROTO_UDP, 0); - } break; default: goto out; -- cgit v0.10.2 From 99023e90fe5c147ea0665bda86764ea44f08a622 Mon Sep 17 00:00:00 2001 From: Matthew Whitehead Date: Wed, 11 Dec 2013 17:00:59 -0500 Subject: 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by: Matthew Whitehead Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/8390/8390.h b/drivers/net/ethernet/8390/8390.h index 2923c51..3e2f2c2 100644 --- a/drivers/net/ethernet/8390/8390.h +++ b/drivers/net/ethernet/8390/8390.h @@ -21,12 +21,6 @@ struct e8390_pkt_hdr { unsigned short count; /* header + packet length in bytes */ }; -#ifdef notdef -extern int ei_debug; -#else -#define ei_debug 1 -#endif - #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev); void eip_poll(struct net_device *dev); @@ -99,6 +93,7 @@ struct ei_device { u32 *reg_offset; /* Register mapping table */ spinlock_t page_lock; /* Page register locks */ unsigned long priv; /* Private field to store bus IDs etc. */ + u32 msg_enable; /* debug message level */ #ifdef AX88796_PLATFORM unsigned char rxcr_base; /* default value for RXCR */ #endif diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 912ed7a..811fa5d 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -116,9 +116,15 @@ static const char version[] = static int apne_owned; /* signal if card already owned */ +static u32 apne_msg_enable; +module_param_named(msg_enable, apne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + struct net_device * __init apne_probe(int unit) { struct net_device *dev; + struct ei_device *ei_local; + #ifndef MANUAL_CONFIG char tuple[8]; #endif @@ -133,11 +139,11 @@ struct net_device * __init apne_probe(int unit) if ( !(AMIGAHW_PRESENT(PCMCIA)) ) return ERR_PTR(-ENODEV); - printk("Looking for PCMCIA ethernet card : "); + pr_info("Looking for PCMCIA ethernet card : "); /* check if a card is inserted */ if (!(PCMCIA_INSERTED)) { - printk("NO PCMCIA card inserted\n"); + pr_cont("NO PCMCIA card inserted\n"); return ERR_PTR(-ENODEV); } @@ -148,6 +154,8 @@ struct net_device * __init apne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); } + ei_local = netdev_priv(dev); + ei_local->msg_enable = apne_msg_enable; /* disable pcmcia irq for readtuple */ pcmcia_disable_irq(); @@ -155,14 +163,14 @@ struct net_device * __init apne_probe(int unit) #ifndef MANUAL_CONFIG if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) || (tuple[2] != CISTPL_FUNCID_NETWORK)) { - printk("not an ethernet card\n"); + pr_cont("not an ethernet card\n"); /* XXX: shouldn't we re-enable irq here? */ free_netdev(dev); return ERR_PTR(-ENODEV); } #endif - printk("ethernet PCMCIA card inserted\n"); + pr_cont("ethernet PCMCIA card inserted\n"); if (!init_pcmcia()) { /* XXX: shouldn't we re-enable irq here? */ @@ -204,11 +212,12 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) int neX000, ctron; #endif static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug && version_printed++ == 0) - printk(version); + if ((apne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); - printk("PCMCIA NE*000 ethercard probe"); + netdev_info(dev, "PCMCIA NE*000 ethercard probe"); /* Reset card. Who knows what dain-bramaged state it was left in. */ { unsigned long reset_start_time = jiffies; @@ -217,7 +226,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(" not found (no reset ack).\n"); + pr_cont(" not found (no reset ack).\n"); return -ENODEV; } @@ -288,7 +297,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) start_page = 0x01; stop_page = (wordlength == 2) ? 0x40 : 0x20; } else { - printk(" not found.\n"); + pr_cont(" not found.\n"); return -ENXIO; } @@ -320,9 +329,9 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = SA_prom[i]; - printk(" %pM\n", dev->dev_addr); + pr_cont(" %pM\n", dev->dev_addr); - printk("%s: %s found.\n", dev->name, name); + netdev_info(dev, "%s found.\n", name); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -352,10 +361,11 @@ static void apne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); init_pcmcia(); - if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -365,8 +375,8 @@ apne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk("%s: ne_reset_8390() did not complete.\n", dev->name); - break; + netdev_err(dev, "ne_reset_8390() did not complete.\n"); + break; } outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */ } @@ -386,9 +396,9 @@ apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pa /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } @@ -433,9 +443,9 @@ apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int rin /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -481,9 +491,9 @@ apne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d][intr:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d][intr:%d]\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -513,7 +523,7 @@ apne_block_output(struct net_device *dev, int count, while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk("%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); apne_reset_8390(dev); NS8390_init(dev,1); break; @@ -536,8 +546,8 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) pcmcia_ack_int(pcmcia_intreq); return IRQ_NONE; } - if (ei_debug > 3) - printk("pcmcia intreq = %x\n", pcmcia_intreq); + if (apne_msg_enable & NETIF_MSG_INTR) + pr_debug("pcmcia intreq = %x\n", pcmcia_intreq); pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */ ei_interrupt(irq, dev_id); pcmcia_ack_int(pcmcia_get_intreq()); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 36fa577..8ed5b34 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -78,6 +78,8 @@ static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electron #define AX_GPOC_PPDSET BIT(6) +static u32 ax_msg_enable; + /* device private data */ struct ax_device { @@ -147,8 +149,7 @@ static void ax_reset_8390(struct net_device *dev) unsigned long reset_start_time = jiffies; void __iomem *addr = (void __iomem *)dev->base_addr; - if (ei_debug > 1) - netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -496,12 +497,28 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return phy_ethtool_sset(phy_dev, cmd); } +static u32 ax_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void ax_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops ax_ethtool_ops = { .get_drvinfo = ax_get_drvinfo, .get_settings = ax_get_settings, .set_settings = ax_set_settings, .get_link = ethtool_op_get_link, .get_ts_info = ethtool_op_get_ts_info, + .get_msglevel = ax_get_msglevel, + .set_msglevel = ax_set_msglevel, }; #ifdef CONFIG_AX88796_93CX6 @@ -763,6 +780,7 @@ static int ax_init_dev(struct net_device *dev) ei_local->block_output = &ax_block_output; ei_local->get_8390_hdr = &ax_get_8390_hdr; ei_local->priv = 0; + ei_local->msg_enable = ax_msg_enable; dev->netdev_ops = &ax_netdev_ops; dev->ethtool_ops = &ax_ethtool_ops; diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index d801c141..5698a4c 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -105,6 +105,7 @@ static void AX88190_init(struct net_device *dev, int startp); static int ax_open(struct net_device *dev); static int ax_close(struct net_device *dev); static irqreturn_t ax_interrupt(int irq, void *dev_id); +static u32 axnet_msg_enable; /*====================================================================*/ @@ -152,6 +153,7 @@ static int axnet_probe(struct pcmcia_device *link) return -ENOMEM; ei_local = netdev_priv(dev); + ei_local->msg_enable = axnet_msg_enable; spin_lock_init(&ei_local->page_lock); info = PRIV(dev); @@ -650,11 +652,12 @@ static void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { unsigned int nic_base = dev->base_addr; + struct ei_device *ei_local = netdev_priv(dev); int xfer_count = count; char *buf = skb->data; - if ((ei_debug > 4) && (count != 4)) - pr_debug("%s: [bi=%d]\n", dev->name, count+4); + if ((netif_msg_rx_status(ei_local)) && (count != 4)) + netdev_dbg(dev, "[bi=%d]\n", count+4); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); @@ -810,11 +813,6 @@ module_pcmcia_driver(axnet_cs_driver); #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -925,11 +923,10 @@ static void axnet_tx_timeout(struct net_device *dev) isr = inb(e8390_base+EN0_ISR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - netdev_printk(KERN_DEBUG, dev, - "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", - txsr, isr, tickssofar); + netdev_dbg(dev, "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", + txsr, isr, tickssofar); if (!isr && !dev->stats.tx_packets) { @@ -998,29 +995,30 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", - ei_local->tx2, ei_local->lasttx, - ei_local->txing); + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx2 > 0) + netdev_dbg(dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + ei_local->tx2, ei_local->lasttx, + ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", - ei_local->tx1, ei_local->lasttx, - ei_local->txing); + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx1 > 0) + netdev_dbg(dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + ei_local->tx1, ei_local->lasttx, + ei_local->txing); } else { /* We should never get here. */ - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, - ei_local->lasttx); + netif_dbg(ei_local, tx_err, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, + ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -1124,10 +1122,9 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } - - if (ei_debug > 3) - netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", - inb_p(e8390_base + EN0_ISR)); + + netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", + inb_p(e8390_base + EN0_ISR)); outb_p(0x00, e8390_base + EN0_ISR); ei_local->irqlock = 1; @@ -1137,9 +1134,8 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ++nr_serviced < MAX_SERVICE) { if (!netif_running(dev) || (interrupts == 0xff)) { - if (ei_debug > 1) - netdev_warn(dev, - "interrupt from stopped card\n"); + netif_warn(ei_local, intr, dev, + "interrupt from stopped card\n"); outb_p(interrupts, e8390_base + EN0_ISR); interrupts = 0; break; @@ -1175,14 +1171,15 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && ei_debug > 3) + if (interrupts && (netif_msg_intr(ei_local))) { handled = 1; if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ - if(interrupts!=0xFF) - netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", + if (interrupts != 0xFF) + netdev_warn(dev, + "Too much work at interrupt, status %#2.2x\n", interrupts); outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ } else { @@ -1221,8 +1218,7 @@ static void ei_tx_err(struct net_device *dev) unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); #ifdef VERBOSE_ERROR_DUMP - netdev_printk(KERN_DEBUG, dev, - "transmitter error (%#2x):", txsr); + netdev_dbg(dev, "transmitter error (%#2x):", txsr); if (txsr & ENTSR_ABT) pr_cont(" excess-collisions"); if (txsr & ENTSR_ND) @@ -1287,9 +1283,9 @@ static void ei_tx_intr(struct net_device *dev) else if (ei_local->tx2 < 0) { if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx2); + netdev_err(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx2); ei_local->tx2 = 0; if (ei_local->tx1 > 0) { @@ -1366,9 +1362,11 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", - this_frame, ei_local->current_page); + if ((netif_msg_rx_err(ei_local)) && + this_frame != ei_local->current_page && + (this_frame != 0x0 || rxing_page != 0xFF)) + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ break; /* Done for now */ @@ -1383,11 +1381,10 @@ static void ei_receive(struct net_device *dev) if (pkt_len < 60 || pkt_len > 1518) { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + netif_err(ei_local, rx_err, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } @@ -1398,10 +1395,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + netif_err(ei_local, rx_err, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } @@ -1420,11 +1416,10 @@ static void ei_receive(struct net_device *dev) } else { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + netif_err(ei_local, rx_err, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -1461,6 +1456,7 @@ static void ei_rx_overrun(struct net_device *dev) axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; + struct ei_device *ei_local = netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -1468,9 +1464,8 @@ static void ei_rx_overrun(struct net_device *dev) */ was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); + + netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index 78c6fb4..b15e482a 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -56,9 +56,6 @@ #define ei_inb_p(_p) readb((void __iomem *)_p) #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) -#define NET_DEBUG 0 -#define DEBUG_INIT 2 - #define DRV_NAME "etherh" #define DRV_VERSION "1.11" @@ -67,7 +64,7 @@ static char version[] __initdata = #include "lib8390.c" -static unsigned int net_debug = NET_DEBUG; +static u32 etherh_msg_enable; struct etherh_priv { void __iomem *ioc_fast; @@ -317,9 +314,9 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -361,8 +358,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_ERR "%s: timeout waiting for TX RDC\n", - dev->name); + netdev_warn(dev, "timeout waiting for TX RDC\n"); etherh_reset (dev); __NS8390_init (dev, 1); break; @@ -383,9 +379,9 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -423,9 +419,9 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_get_header: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -513,8 +509,8 @@ static void __init etherh_banner(void) { static int version_printed; - if (net_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version); + if ((etherh_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + pr_info("%s", version); } /* @@ -625,11 +621,27 @@ static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return 0; } +static u32 etherh_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void etherh_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops etherh_ethtool_ops = { .get_settings = etherh_get_settings, .set_settings = etherh_set_settings, .get_drvinfo = etherh_get_drvinfo, .get_ts_info = ethtool_op_get_ts_info, + .get_msglevel = etherh_get_msglevel, + .set_msglevel = etherh_set_msglevel, }; static const struct net_device_ops etherh_netdev_ops = { @@ -746,6 +758,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) ei_local->block_output = etherh_block_output; ei_local->get_8390_hdr = etherh_get_header; ei_local->interface_num = 0; + ei_local->msg_enable = etherh_msg_enable; etherh_reset(dev); __NS8390_init(dev, 0); @@ -754,8 +767,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) if (ret) goto free; - printk(KERN_INFO "%s: %s in slot %d, %pM\n", - dev->name, data->name, ec->slot_no, dev->dev_addr); + netdev_info(dev, "%s in slot %d, %pM\n", + data->name, ec->slot_no, dev->dev_addr); ecard_set_drvdata(ec, dev); diff --git a/drivers/net/ethernet/8390/hydra.c b/drivers/net/ethernet/8390/hydra.c index fb3dd43..d8b86c8 100644 --- a/drivers/net/ethernet/8390/hydra.c +++ b/drivers/net/ethernet/8390/hydra.c @@ -66,6 +66,7 @@ static void hydra_block_input(struct net_device *dev, int count, static void hydra_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void hydra_remove_one(struct zorro_dev *z); +static u32 hydra_msg_enable; static struct zorro_device_id hydra_zorro_tbl[] = { { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, @@ -119,6 +120,7 @@ static int hydra_init(struct zorro_dev *z) int start_page, stop_page; int j; int err; + struct ei_device *ei_local; static u32 hydra_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, @@ -137,6 +139,8 @@ static int hydra_init(struct zorro_dev *z) start_page = NESM_START_PG; stop_page = NESM_STOP_PG; + ei_local = netdev_priv(dev); + ei_local->msg_enable = hydra_msg_enable; dev->base_addr = ioaddr; dev->irq = IRQ_AMIGA_PORTS; @@ -187,15 +191,16 @@ static int hydra_open(struct net_device *dev) static int hydra_close(struct net_device *dev) { - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); __ei_close(dev); return 0; } static void hydra_reset_8390(struct net_device *dev) { - printk(KERN_INFO "Hydra hw reset not there\n"); + netdev_info(dev, "Hydra hw reset not there\n"); } static void hydra_get_8390_hdr(struct net_device *dev, diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index b329f5c..d2cd804 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -99,11 +99,6 @@ #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -116,6 +111,11 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, static void do_set_multicast_list(struct net_device *dev); static void __NS8390_init(struct net_device *dev, int startp); +static unsigned version_printed; +static u32 msg_enable; +module_param(msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + /* * SMP and the 8390 setup. * @@ -345,19 +345,23 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, if (ei_local->tx1 == 0) { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - netdev_dbg(dev, "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx2 > 0) + netdev_dbg(dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", ei_local->tx2, ei_local->lasttx, ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - netdev_dbg(dev, "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx1 > 0) + netdev_dbg(dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", ei_local->tx1, ei_local->lasttx, ei_local->txing); } else { /* We should never get here. */ - if (ei_debug) - netdev_dbg(dev, "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, ei_local->lasttx); + netif_dbg(ei_local, tx_err, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -388,7 +392,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, } else ei_local->txqueue++; - if (ei_local->tx1 && ei_local->tx2) + if (ei_local->tx1 && ei_local->tx2) netif_stop_queue(dev); else netif_start_queue(dev); @@ -445,9 +449,8 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) /* Change to page 0 and read the intr status reg. */ ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - if (ei_debug > 3) - netdev_dbg(dev, "interrupt(isr=%#2.2x)\n", - ei_inb_p(e8390_base + EN0_ISR)); + netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", + ei_inb_p(e8390_base + EN0_ISR)); /* !!Assumption!! -- we stay in page 0. Don't break this. */ while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 && @@ -485,7 +488,7 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); } - if (interrupts && ei_debug) { + if (interrupts && (netif_msg_intr(ei_local))) { ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ @@ -676,10 +679,11 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if (ei_debug > 0 && + if ((netif_msg_rx_status(ei_local)) && this_frame != ei_local->current_page && (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + netdev_err(dev, + "mismatched read page pointers %2x vs %2x\n", this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ @@ -707,10 +711,10 @@ static void ei_receive(struct net_device *dev) } if (pkt_len < 60 || pkt_len > 1518) { - if (ei_debug) - netdev_dbg(dev, "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + netif_dbg(ei_local, rx_status, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -718,9 +722,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - if (ei_debug > 1) - netdev_dbg(dev, "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + netif_err(ei_local, rx_err, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } else { @@ -736,10 +740,10 @@ static void ei_receive(struct net_device *dev) dev->stats.multicast++; } } else { - if (ei_debug) - netdev_dbg(dev, "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + netif_err(ei_local, rx_err, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -789,8 +793,7 @@ static void ei_rx_overrun(struct net_device *dev) was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS; ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - if (ei_debug > 1) - netdev_dbg(dev, "Receiver overrun\n"); + netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* @@ -965,8 +968,9 @@ static void __ei_set_multicast_list(struct net_device *dev) static void ethdev_setup(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk(version); + + if ((msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + pr_info("%s", version); ether_setup(dev); @@ -1035,9 +1039,10 @@ static void __NS8390_init(struct net_device *dev, int startp) ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ for (i = 0; i < 6; i++) { ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if (ei_debug > 1 && + if ((netif_msg_probe(ei_local)) && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i)) != dev->dev_addr[i]) - netdev_err(dev, "Hw. address read/write mismap %d\n", i); + netdev_err(dev, + "Hw. address read/write mismap %d\n", i); } ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 88ccc8b..90e825e 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -167,6 +167,7 @@ static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); +static u32 mac8390_msg_enable; static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) { @@ -402,6 +403,7 @@ struct net_device * __init mac8390_probe(int unit) struct net_device *dev; struct nubus_dev *ndev = NULL; int err = -ENODEV; + struct ei_device *ei_local; static unsigned int slots; @@ -440,6 +442,10 @@ struct net_device * __init mac8390_probe(int unit) if (!ndev) goto out; + + ei_local = netdev_priv(dev); + ei_local->msg_enable = mac8390_msg_enable; + err = register_netdev(dev); if (err) goto out; @@ -660,19 +666,22 @@ static int mac8390_close(struct net_device *dev) static void mac8390_no_reset(struct net_device *dev) { + struct ei_device *ei_local = netdev_priv(dev); + ei_status.txing = 0; - if (ei_debug > 1) - pr_info("reset not supported\n"); + netif_info(ei_local, hw, dev, "reset not supported\n"); } static void interlan_reset(struct net_device *dev) { unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq)); - if (ei_debug > 1) - pr_info("Need to reset the NS8390 t=%lu...", jiffies); + struct ei_device *ei_local = netdev_priv(dev); + + netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...", + jiffies); ei_status.txing = 0; target[0xC0000] = 0; - if (ei_debug > 1) + if (netif_msg_hw(ei_local)) pr_cont("reset complete\n"); } diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index 230efd6..df0ffca 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -39,6 +39,7 @@ static const char version[] = #define NESM_START_PG 0x40 /* First page of TX buffer */ #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ +static u32 mcf8390_msg_enable; #ifdef NE2000_ODDOFFSET /* @@ -153,9 +154,9 @@ static void mcf8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; u32 addr = dev->base_addr; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -288,7 +289,7 @@ static void mcf8390_block_output(struct net_device *dev, int count, dma_start = jiffies; while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_err(dev, "timeout waiting for Tx RDC\n"); + netdev_warn(dev, "timeout waiting for Tx RDC\n"); mcf8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -437,6 +438,7 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev); ei_local = netdev_priv(dev); + ei_local->msg_enable = mcf8390_msg_enable; dev->irq = irq->start; dev->base_addr = mem->start; diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index b2e8405..58eaa8f 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -71,14 +71,17 @@ static struct platform_device *pdev_ne[MAX_NE_CARDS]; static int io[MAX_NE_CARDS]; static int irq[MAX_NE_CARDS]; static int bad[MAX_NE_CARDS]; +static u32 ne_msg_enable; #ifdef MODULE module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(bad, int, NULL, 0); +module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); MODULE_PARM_DESC(irq, "IRQ number(s)"); MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); #endif /* MODULE */ @@ -214,8 +217,8 @@ static int __init do_ne_probe(struct net_device *dev) if (base_addr > 0x1ff) { /* Check a single specified location. */ int ret = ne_probe1(dev, base_addr); if (ret) - printk(KERN_WARNING "ne.c: No NE*000 card found at " - "i/o = %#lx\n", base_addr); + netdev_warn(dev, "ne.c: No NE*000 card found at " + "i/o = %#lx\n", base_addr); return ret; } else if (base_addr != 0) /* Don't probe at all. */ @@ -264,11 +267,14 @@ static int __init ne_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) isapnp_clone_list[i].driver_data, - dev->base_addr, dev->irq); + netdev_info(dev, + "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) isapnp_clone_list[i].driver_data, + dev->base_addr, dev->irq); if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); + netdev_err(dev, + "ne.c: Probe of ISAPnP card at %#lx failed.\n", + dev->base_addr); pnp_device_detach(idev); return -ENXIO; } @@ -293,6 +299,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) int neX000, ctron, copam, bad_card; int reg0, ret; static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -319,10 +326,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } } - if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s%s", version1, version2); + if ((ne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, "%s%s", version1, version2); - printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); + netdev_info(dev, "NE*000 ethercard probe at %#3lx:", ioaddr); /* A user with a poor card that fails to ack the reset, or that does not have a valid 0x57,0x57 signature can still use this @@ -343,10 +350,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { if (bad_card) { - printk(" (warning: no reset ack)"); + pr_cont(" (warning: no reset ack)"); break; } else { - printk(" not found (no reset ack).\n"); + pr_cont(" not found (no reset ack).\n"); ret = -ENODEV; goto err_out; } @@ -454,13 +461,13 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (bad_clone_list[i].name8 == NULL) { - printk(" not found (invalid signature %2.2x %2.2x).\n", + pr_cont(" not found (invalid signature %2.2x %2.2x).\n", SA_prom[14], SA_prom[15]); ret = -ENXIO; goto err_out; } #else - printk(" not found.\n"); + pr_cont(" not found.\n"); ret = -ENXIO; goto err_out; #endif @@ -476,15 +483,15 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) mdelay(10); /* wait 10ms for interrupt to propagate */ outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */ dev->irq = probe_irq_off(cookie); - if (ei_debug > 2) - printk(" autoirq is %d\n", dev->irq); + if (netif_msg_probe(ei_local)) + pr_cont(" autoirq is %d", dev->irq); } else if (dev->irq == 2) /* Fixup for users that don't know that IRQ 2 is really IRQ 9, or don't know which one to set. */ dev->irq = 9; if (! dev->irq) { - printk(" failed to detect IRQ line.\n"); + pr_cont(" failed to detect IRQ line.\n"); ret = -EAGAIN; goto err_out; } @@ -493,7 +500,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) share and the board will usually be enabled. */ ret = request_irq(dev->irq, eip_interrupt, 0, name, dev); if (ret) { - printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); + pr_cont(" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); goto err_out; } @@ -512,7 +519,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } #endif - printk("%pM\n", dev->dev_addr); + pr_cont("%pM\n", dev->dev_addr); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -536,11 +543,12 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) dev->netdev_ops = &eip_netdev_ops; NS8390p_init(dev, 0); + ei_local->msg_enable = ne_msg_enable; ret = register_netdev(dev); if (ret) goto out_irq; - printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n", - dev->name, name, ioaddr, dev->irq); + netdev_info(dev, "%s found at %#lx, using IRQ %d.\n", + name, ioaddr, dev->irq); return 0; out_irq: @@ -556,9 +564,9 @@ err_out: static void ne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -569,7 +577,7 @@ static void ne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name); + netdev_err(dev, "ne_reset_8390() did not complete.\n"); break; } outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -587,9 +595,9 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, i if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -621,6 +629,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk { #ifdef NE_SANITY_CHECK int xfer_count = count; + struct ei_device *ei_local = netdev_priv(dev); #endif int nic_base = dev->base_addr; char *buf = skb->data; @@ -628,9 +637,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -660,7 +669,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk this message you either 1) have a slightly incompatible clone or 2) have noise/speed problems with your bus. */ - if (ei_debug > 1) + if (netif_msg_rx_status(ei_local)) { /* DMA termination address check... */ int addr, tries = 20; @@ -674,9 +683,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk break; } while (--tries > 0); if (tries <= 0) - printk(KERN_WARNING "%s: RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); + netdev_warn(dev, "RX transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -690,6 +699,7 @@ static void ne_block_output(struct net_device *dev, int count, unsigned long dma_start; #ifdef NE_SANITY_CHECK int retries = 0; + struct ei_device *ei_local = netdev_priv(dev); #endif /* Round the count up for word writes. Do we need to do this? @@ -702,9 +712,9 @@ static void ne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -751,7 +761,7 @@ retry: /* This was for the ALPHA version only, but enough people have been encountering problems so it is still here. */ - if (ei_debug > 1) + if (netif_msg_tx_queued(ei_local)) { /* DMA termination address check... */ int addr, tries = 20; @@ -765,9 +775,9 @@ retry: if (tries <= 0) { - printk(KERN_WARNING "%s: Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); + netdev_warn(dev, "Tx packet transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -776,7 +786,7 @@ retry: while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); ne_reset_8390(dev); NS8390p_init(dev, 1); break; @@ -936,8 +946,8 @@ int __init init_module(void) retval = platform_driver_probe(&ne_driver, ne_drv_probe); if (retval) { if (io[0] == 0) - printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\"" - " value(s) for ISA cards.\n"); + pr_notice("ne.c: You must supply \"io=0xNNN\"" + " value(s) for ISA cards.\n"); ne_loop_rm_unreg(1); return retval; } diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index fc14a85..f395c96 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -33,8 +33,6 @@ /* The user-configurable values. These may be modified when a driver module is loaded.*/ -static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ - #define MAX_UNITS 8 /* More are supported, limit only on options */ /* Used to pass the full-duplex flag, etc. */ static int full_duplex[MAX_UNITS]; @@ -60,6 +58,8 @@ static int options[MAX_UNITS]; #include "8390.h" +static u32 ne2k_msg_enable; + /* These identify the driver base version and may not be removed. */ static const char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE @@ -76,10 +76,10 @@ MODULE_AUTHOR("Donald Becker / Paul Gortmaker"); MODULE_DESCRIPTION("PCI NE2000 clone driver"); MODULE_LICENSE("GPL"); -module_param(debug, int, 0); +module_param_named(msg_enable, ne2k_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(debug, "debug level (1-2)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_PARM_DESC(options, "Bit 5: full duplex"); MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); @@ -226,6 +226,7 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, static unsigned int fnd_cnt; long ioaddr; int flags = pci_clone_list[chip_idx].flags; + struct ei_device *ei_local; /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -280,6 +281,8 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, goto err_out_free_res; } dev->netdev_ops = &ne2k_netdev_ops; + ei_local = netdev_priv(dev); + ei_local->msg_enable = ne2k_msg_enable; SET_NETDEV_DEV(dev, &pdev->dev); @@ -379,9 +382,9 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (i) goto err_out_free_netdev; - printk("%s: %s found at %#lx, IRQ %d, %pM.\n", - dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, - dev->dev_addr); + netdev_info(dev, "%s found at %#lx, IRQ %d, %pM.\n", + pci_clone_list[chip_idx].name, ioaddr, dev->irq, + dev->dev_addr); return 0; @@ -450,9 +453,10 @@ static int ne2k_pci_close(struct net_device *dev) static void ne2k_pci_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (debug > 1) printk("%s: Resetting the 8390 t=%ld...", - dev->name, jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", + jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -462,7 +466,7 @@ static void ne2k_pci_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (jiffies - reset_start_time > 2) { - printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name); + netdev_err(dev, "ne2k_pci_reset_8390() did not complete.\n"); break; } outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -479,9 +483,9 @@ static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr * /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr " + netdev_err(dev, "DMAing conflict in ne2k_pci_get_8390_hdr " "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } @@ -517,9 +521,9 @@ static void ne2k_pci_block_input(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_block_input " + netdev_err(dev, "DMAing conflict in ne2k_pci_block_input " "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -572,9 +576,9 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_block_output." + netdev_err(dev, "DMAing conflict in ne2k_pci_block_output." "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -619,7 +623,7 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */ - printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); ne2k_pci_reset_8390(dev); NS8390_init(dev,1); break; @@ -640,8 +644,24 @@ static void ne2k_pci_get_drvinfo(struct net_device *dev, strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); } +static u32 ne2k_pci_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void ne2k_pci_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, + .get_msglevel = ne2k_pci_get_msglevel, + .set_msglevel = ne2k_pci_set_msglevel, }; static void ne2k_pci_remove_one(struct pci_dev *pdev) diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index 46c5aad..eea33d6 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -67,7 +67,7 @@ #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ static const char *if_names[] = { "auto", "10baseT", "10base2"}; - +static u32 pcnet_msg_enable; /*====================================================================*/ @@ -558,6 +558,7 @@ static int pcnet_config(struct pcmcia_device *link) int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; + struct ei_device *ei_local; dev_dbg(&link->dev, "pcnet_config\n"); @@ -607,6 +608,8 @@ static int pcnet_config(struct pcmcia_device *link) mii_phy_probe(dev); SET_NETDEV_DEV(dev, &link->dev); + ei_local = netdev_priv(dev); + ei_local->msg_enable = pcnet_msg_enable; if (register_netdev(dev) != 0) { pr_notice("register_netdev() failed\n"); @@ -616,7 +619,7 @@ static int pcnet_config(struct pcmcia_device *link) if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); netdev_info(dev, "NE2000 (DL100%d rev %02x): ", - (info->flags & IS_DL10022) ? 22 : 19, id); + (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) pr_cont("PNA, "); } else { @@ -1063,9 +1066,9 @@ static void ei_watchdog(u_long arg) if (info->phy_id == info->eth_phy) { if (p) netdev_info(dev, "autonegotiation complete: " - "%sbaseT-%cD selected\n", - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); + "%sbaseT-%cD selected\n", + ((p & 0x0180) ? "100" : "10"), + ((p & 0x0140) ? 'F' : 'H')); else netdev_info(dev, "link partner did not autonegotiate\n"); } @@ -1081,7 +1084,7 @@ static void ei_watchdog(u_long arg) mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; netdev_info(dev, "switched to %s transceiver\n", - (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); + (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); info->link_status = 0; @@ -1128,9 +1131,9 @@ static void dma_get_8390_hdr(struct net_device *dev, unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -1159,13 +1162,14 @@ static void dma_block_input(struct net_device *dev, int count, unsigned int nic_base = dev->base_addr; int xfer_count = count; char *buf = skb->data; + struct ei_device *ei_local = netdev_priv(dev); - if ((ei_debug > 4) && (count != 4)) + if ((netif_msg_rx_status(ei_local)) && (count != 4)) netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1183,7 +1187,8 @@ static void dma_block_input(struct net_device *dev, int count, /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ #ifdef PCMCIA_DEBUG - if (ei_debug > 4) { /* DMA termination address check... */ + /* DMA termination address check... */ + if (netif_msg_rx_status(ei_local)) { int addr, tries = 20; do { /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here @@ -1196,8 +1201,8 @@ static void dma_block_input(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) netdev_notice(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -1213,12 +1218,12 @@ static void dma_block_output(struct net_device *dev, int count, pcnet_dev_t *info = PRIV(dev); #ifdef PCMCIA_DEBUG int retries = 0; + struct ei_device *ei_local = netdev_priv(dev); #endif u_long dma_start; #ifdef PCMCIA_DEBUG - if (ei_debug > 4) - netdev_dbg(dev, "[bo=%d]\n", count); + netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? @@ -1227,9 +1232,9 @@ static void dma_block_output(struct net_device *dev, int count, if (count & 0x01) count++; if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_output." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_output." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1256,7 +1261,8 @@ static void dma_block_output(struct net_device *dev, int count, #ifdef PCMCIA_DEBUG /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ - if (ei_debug > 4) { /* DMA termination address check... */ + /* DMA termination address check... */ + if (netif_msg_tx_queued(ei_local)) { int addr, tries = 20; do { int high = inb_p(nic_base + EN0_RSARHI); @@ -1267,8 +1273,8 @@ static void dma_block_output(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) { netdev_notice(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -1277,10 +1283,10 @@ static void dma_block_output(struct net_device *dev, int count, while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - netdev_notice(dev, "timeout waiting for Tx RDC.\n"); - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - break; + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + pcnet_reset_8390(dev); + NS8390_init(dev, 1); + break; } outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index b0fbce3..139385d 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -111,6 +111,7 @@ static struct isapnp_device_id ultra_device_ids[] __initdata = { MODULE_DEVICE_TABLE(isapnp, ultra_device_ids); #endif +static u32 ultra_msg_enable; #define START_PG 0x00 /* First page of TX buffer */ @@ -211,6 +212,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) unsigned char num_pages, irqreg, addr, piomode; unsigned char idreg = inb(ioaddr + 7); unsigned char reg4 = inb(ioaddr + 4) & 0x7f; + struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -232,16 +234,16 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) goto out; } - if (ei_debug && version_printed++ == 0) - printk(version); + if ((ultra_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ"; for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - printk("%s: %s at %#3x, %pM", dev->name, model_name, - ioaddr, dev->dev_addr); + netdev_info(dev, "%s at %#3x, %pM", model_name, + ioaddr, dev->dev_addr); /* Switch from the station address to the alternate register set and read the useful registers there. */ @@ -265,7 +267,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)]; if (irq == 0) { - printk(", failed to detect IRQ line.\n"); + pr_cont(", failed to detect IRQ line.\n"); retval = -EAGAIN; goto out; } @@ -296,7 +298,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256); if (!ei_status.mem) { - printk(", failed to ioremap.\n"); + pr_cont(", failed to ioremap.\n"); retval = -ENOMEM; goto out; } @@ -304,14 +306,15 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256; if (piomode) { - printk(",%s IRQ %d programmed-I/O mode.\n", - eeprom_irq ? "EEPROM" : "assigned ", dev->irq); + pr_cont(", %s IRQ %d programmed-I/O mode.\n", + eeprom_irq ? "EEPROM" : "assigned ", dev->irq); ei_status.block_input = &ultra_pio_input; ei_status.block_output = &ultra_pio_output; ei_status.get_8390_hdr = &ultra_pio_get_hdr; } else { - printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ", - dev->irq, dev->mem_start, dev->mem_end-1); + pr_cont(", %s IRQ %d memory %#lx-%#lx.\n", + eeprom_irq ? "" : "assigned ", dev->irq, dev->mem_start, + dev->mem_end-1); ei_status.block_input = &ultra_block_input; ei_status.block_output = &ultra_block_output; ei_status.get_8390_hdr = &ultra_get_8390_hdr; @@ -320,6 +323,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &ultra_netdev_ops; NS8390_init(dev, 0); + ei_local->msg_enable = ultra_msg_enable; retval = register_netdev(dev); if (retval) @@ -356,12 +360,15 @@ static int __init ultra_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) ultra_device_ids[i].driver_data, - dev->base_addr, dev->irq); + netdev_info(dev, + "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) ultra_device_ids[i].driver_data, + dev->base_addr, dev->irq); if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); - pnp_device_detach(idev); + netdev_err(dev, + "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", + dev->base_addr); + pnp_device_detach(idev); return -ENXIO; } ei_status.priv = (unsigned long)idev; @@ -412,9 +419,10 @@ static void ultra_reset_8390(struct net_device *dev) { int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */ + struct ei_device *ei_local = netdev_priv(dev); outb(ULTRA_RESET, cmd_port); - if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting Ultra, t=%ld...\n", jiffies); ei_status.txing = 0; outb(0x00, cmd_port); /* Disable shared memory for safety. */ @@ -424,7 +432,7 @@ ultra_reset_8390(struct net_device *dev) else outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */ - if (ei_debug > 1) printk("reset done\n"); + netif_dbg(ei_local, hw, dev, "reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -530,11 +538,11 @@ static int ultra_close_card(struct net_device *dev) { int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); netif_stop_queue(dev); - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); outb(0x00, ioaddr + 6); /* Disable interrupts. */ free_irq(dev->irq, dev); @@ -556,8 +564,10 @@ static int irq[MAX_ULTRA_CARDS]; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); +module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index 8df4c41..aca957d 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -69,6 +69,11 @@ static void stnic_block_output (struct net_device *dev, int count, static void stnic_init (struct net_device *dev); +static u32 stnic_msg_enable; + +module_param_named(msg_enable, stnic_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + /* SH7750 specific read/write io. */ static inline void STNIC_DELAY (void) @@ -100,6 +105,7 @@ static int __init stnic_probe(void) { struct net_device *dev; int i, err; + struct ei_device *ei_local; /* If we are not running on a SolutionEngine, give up now */ if (! MACH_SE) @@ -125,10 +131,10 @@ static int __init stnic_probe(void) share and the board will usually be enabled. */ err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (err) { - printk (KERN_EMERG " unable to get IRQ %d.\n", dev->irq); - free_netdev(dev); - return err; - } + netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq); + free_netdev(dev); + return err; + } ei_status.name = dev->name; ei_status.word16 = 1; @@ -147,6 +153,8 @@ static int __init stnic_probe(void) ei_status.block_output = &stnic_block_output; stnic_init (dev); + ei_local = netdev_priv(dev); + ei_local->msg_enable = stnic_msg_enable; err = register_netdev(dev); if (err) { @@ -156,7 +164,7 @@ static int __init stnic_probe(void) } stnic_dev = dev; - printk (KERN_INFO "NS ST-NIC 83902A\n"); + netdev_info(dev, "NS ST-NIC 83902A\n"); return 0; } @@ -164,10 +172,11 @@ static int __init stnic_probe(void) static void stnic_reset (struct net_device *dev) { + struct ei_device *ei_local = netdev_priv(dev); + *(vhalf *) PA_83902_RST = 0; udelay (5); - if (ei_debug > 1) - printk (KERN_WARNING "8390 reset done (%ld).\n", jiffies); + netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies); *(vhalf *) PA_83902_RST = ~0; udelay (5); } @@ -176,6 +185,8 @@ static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { + struct ei_device *ei_local = netdev_priv(dev); + half buf[2]; STNIC_WRITE (PG0_RSAR0, 0); @@ -196,8 +207,7 @@ stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8); #endif - if (ei_debug > 1) - printk (KERN_DEBUG "ring %x status %02x next %02x count %04x.\n", + netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n", ring_page, hdr->status, hdr->next, hdr->count); STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index 03eb3ee..dd7d816 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -60,6 +60,7 @@ static void wd_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static int wd_close(struct net_device *dev); +static u32 wd_msg_enable; #define WD_START_PG 0x00 /* First page of TX buffer */ #define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */ @@ -170,6 +171,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */ const char *model_name; static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); for (i = 0; i < 8; i++) checksum += inb(ioaddr + 8 + i); @@ -180,19 +182,19 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) /* Check for semi-valid mem_start/end values if supplied. */ if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) { - printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); + netdev_warn(dev, + "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); dev->mem_start = 0; dev->mem_end = 0; } - if (ei_debug && version_printed++ == 0) - printk(version); + if ((wd_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - printk("%s: WD80x3 at %#3x, %pM", - dev->name, ioaddr, dev->dev_addr); + netdev_info(dev, "WD80x3 at %#3x, %pM", ioaddr, dev->dev_addr); /* The following PureData probe code was contributed by Mike Jagdis . Puredata does software @@ -244,8 +246,9 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) } #ifndef final_version if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01)) - printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", - word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8); + pr_cont("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", + word16 ? 16 : 8, + (inb(ioaddr+1) & 0x01) ? 16 : 8); #endif } @@ -259,7 +262,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) if (reg0 == 0xff || reg0 == 0) { /* Future plan: this could check a few likely locations first. */ dev->mem_start = 0xd0000; - printk(" assigning address %#lx", dev->mem_start); + pr_cont(" assigning address %#lx", dev->mem_start); } else { int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f; /* Some boards don't have the register 5 -- it returns 0xff. */ @@ -297,8 +300,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */ - if (ei_debug > 2) - printk(" autoirq is %d", dev->irq); + if (netif_msg_drv(ei_local)) + pr_cont(" autoirq is %d", dev->irq); if (dev->irq < 2) dev->irq = word16 ? 10 : 5; } else @@ -310,7 +313,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) share and the board will usually be enabled. */ i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (i) { - printk (" unable to get IRQ %d.\n", dev->irq); + pr_cont(" unable to get IRQ %d.\n", dev->irq); return i; } @@ -338,8 +341,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) return -ENOMEM; } - printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", - model_name, dev->irq, dev->mem_start, dev->mem_end-1); + pr_cont(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", + model_name, dev->irq, dev->mem_start, dev->mem_end-1); ei_status.reset_8390 = wd_reset_8390; ei_status.block_input = wd_block_input; @@ -348,6 +351,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &wd_netdev_ops; NS8390_init(dev, 0); + ei_local->msg_enable = wd_msg_enable; #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ @@ -385,9 +389,11 @@ static void wd_reset_8390(struct net_device *dev) { int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); outb(WD_RESET, wd_cmd_port); - if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the WD80x3 t=%lu...\n", + jiffies); ei_status.txing = 0; /* Set up the ASIC registers, just in case something changed them. */ @@ -395,7 +401,7 @@ wd_reset_8390(struct net_device *dev) if (ei_status.word16) outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); - if (ei_debug > 1) printk("reset done\n"); + netif_dbg(ei_local, hw, dev, "reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -474,9 +480,9 @@ static int wd_close(struct net_device *dev) { int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); ei_close(dev); /* Change from 16-bit to 8-bit shared memory so reboot works. */ @@ -502,10 +508,12 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param_array(mem_end, int, NULL, 0); +module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)"); MODULE_PARM_DESC(mem_end, "memory end address(es)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index 85ec4c2..7b373e65 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -44,6 +44,8 @@ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; +static u32 zorro8390_msg_enable; + #include "lib8390.c" #define DRV_NAME "zorro8390" @@ -86,9 +88,9 @@ static struct card_info { static void zorro8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - netdev_dbg(dev, "resetting - t=%ld...\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -119,8 +121,9 @@ static void zorro8390_get_8390_hdr(struct net_device *dev, * If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", - __func__, ei_status.dmaing, ei_status.irqlock); + netdev_warn(dev, + "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); return; } @@ -230,7 +233,7 @@ static void zorro8390_block_output(struct net_device *dev, int count, while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_err(dev, "timeout waiting for Tx RDC\n"); + netdev_warn(dev, "timeout waiting for Tx RDC\n"); zorro8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -248,8 +251,9 @@ static int zorro8390_open(struct net_device *dev) static int zorro8390_close(struct net_device *dev) { - if (ei_debug > 1) - netdev_dbg(dev, "Shutting down ethercard\n"); + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); __ei_close(dev); return 0; } @@ -293,6 +297,7 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, int err; unsigned char SA_prom[32]; int start_page, stop_page; + struct ei_device *ei_local = netdev_priv(dev); static u32 zorro8390_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, @@ -383,6 +388,9 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, dev->netdev_ops = &zorro8390_netdev_ops; __NS8390_init(dev, 0); + + ei_local->msg_enable = zorro8390_msg_enable; + err = register_netdev(dev); if (err) { free_irq(IRQ_AMIGA_PORTS, dev); -- cgit v0.10.2 From 9508fdde4d53f0d9e583e841ed08796d2f310be1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 11 Dec 2013 17:20:31 -0500 Subject: Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" This reverts commit 99023e90fe5c147ea0665bda86764ea44f08a622. Accidently checked this into 'net' instead of 'net-next'. Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/8390/8390.h b/drivers/net/ethernet/8390/8390.h index 3e2f2c2..2923c51 100644 --- a/drivers/net/ethernet/8390/8390.h +++ b/drivers/net/ethernet/8390/8390.h @@ -21,6 +21,12 @@ struct e8390_pkt_hdr { unsigned short count; /* header + packet length in bytes */ }; +#ifdef notdef +extern int ei_debug; +#else +#define ei_debug 1 +#endif + #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev); void eip_poll(struct net_device *dev); @@ -93,7 +99,6 @@ struct ei_device { u32 *reg_offset; /* Register mapping table */ spinlock_t page_lock; /* Page register locks */ unsigned long priv; /* Private field to store bus IDs etc. */ - u32 msg_enable; /* debug message level */ #ifdef AX88796_PLATFORM unsigned char rxcr_base; /* default value for RXCR */ #endif diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 811fa5d..912ed7a 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -116,15 +116,9 @@ static const char version[] = static int apne_owned; /* signal if card already owned */ -static u32 apne_msg_enable; -module_param_named(msg_enable, apne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - struct net_device * __init apne_probe(int unit) { struct net_device *dev; - struct ei_device *ei_local; - #ifndef MANUAL_CONFIG char tuple[8]; #endif @@ -139,11 +133,11 @@ struct net_device * __init apne_probe(int unit) if ( !(AMIGAHW_PRESENT(PCMCIA)) ) return ERR_PTR(-ENODEV); - pr_info("Looking for PCMCIA ethernet card : "); + printk("Looking for PCMCIA ethernet card : "); /* check if a card is inserted */ if (!(PCMCIA_INSERTED)) { - pr_cont("NO PCMCIA card inserted\n"); + printk("NO PCMCIA card inserted\n"); return ERR_PTR(-ENODEV); } @@ -154,8 +148,6 @@ struct net_device * __init apne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); } - ei_local = netdev_priv(dev); - ei_local->msg_enable = apne_msg_enable; /* disable pcmcia irq for readtuple */ pcmcia_disable_irq(); @@ -163,14 +155,14 @@ struct net_device * __init apne_probe(int unit) #ifndef MANUAL_CONFIG if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) || (tuple[2] != CISTPL_FUNCID_NETWORK)) { - pr_cont("not an ethernet card\n"); + printk("not an ethernet card\n"); /* XXX: shouldn't we re-enable irq here? */ free_netdev(dev); return ERR_PTR(-ENODEV); } #endif - pr_cont("ethernet PCMCIA card inserted\n"); + printk("ethernet PCMCIA card inserted\n"); if (!init_pcmcia()) { /* XXX: shouldn't we re-enable irq here? */ @@ -212,12 +204,11 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) int neX000, ctron; #endif static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); - if ((apne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); - netdev_info(dev, "PCMCIA NE*000 ethercard probe"); + printk("PCMCIA NE*000 ethercard probe"); /* Reset card. Who knows what dain-bramaged state it was left in. */ { unsigned long reset_start_time = jiffies; @@ -226,7 +217,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - pr_cont(" not found (no reset ack).\n"); + printk(" not found (no reset ack).\n"); return -ENODEV; } @@ -297,7 +288,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) start_page = 0x01; stop_page = (wordlength == 2) ? 0x40 : 0x20; } else { - pr_cont(" not found.\n"); + printk(" not found.\n"); return -ENXIO; } @@ -329,9 +320,9 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = SA_prom[i]; - pr_cont(" %pM\n", dev->dev_addr); + printk(" %pM\n", dev->dev_addr); - netdev_info(dev, "%s found.\n", name); + printk("%s: %s found.\n", dev->name, name); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -361,11 +352,10 @@ static void apne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); init_pcmcia(); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -375,8 +365,8 @@ apne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - netdev_err(dev, "ne_reset_8390() did not complete.\n"); - break; + printk("%s: ne_reset_8390() did not complete.\n", dev->name); + break; } outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */ } @@ -396,9 +386,9 @@ apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pa /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } @@ -443,9 +433,9 @@ apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int rin /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -491,9 +481,9 @@ apne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d][intr:%d]\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d][intr:%d]\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -523,7 +513,7 @@ apne_block_output(struct net_device *dev, int count, while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk("%s: timeout waiting for Tx RDC.\n", dev->name); apne_reset_8390(dev); NS8390_init(dev,1); break; @@ -546,8 +536,8 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) pcmcia_ack_int(pcmcia_intreq); return IRQ_NONE; } - if (apne_msg_enable & NETIF_MSG_INTR) - pr_debug("pcmcia intreq = %x\n", pcmcia_intreq); + if (ei_debug > 3) + printk("pcmcia intreq = %x\n", pcmcia_intreq); pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */ ei_interrupt(irq, dev_id); pcmcia_ack_int(pcmcia_get_intreq()); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 8ed5b34..36fa577 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -78,8 +78,6 @@ static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electron #define AX_GPOC_PPDSET BIT(6) -static u32 ax_msg_enable; - /* device private data */ struct ax_device { @@ -149,7 +147,8 @@ static void ax_reset_8390(struct net_device *dev) unsigned long reset_start_time = jiffies; void __iomem *addr = (void __iomem *)dev->base_addr; - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -497,28 +496,12 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return phy_ethtool_sset(phy_dev, cmd); } -static u32 ax_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void ax_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops ax_ethtool_ops = { .get_drvinfo = ax_get_drvinfo, .get_settings = ax_get_settings, .set_settings = ax_set_settings, .get_link = ethtool_op_get_link, .get_ts_info = ethtool_op_get_ts_info, - .get_msglevel = ax_get_msglevel, - .set_msglevel = ax_set_msglevel, }; #ifdef CONFIG_AX88796_93CX6 @@ -780,7 +763,6 @@ static int ax_init_dev(struct net_device *dev) ei_local->block_output = &ax_block_output; ei_local->get_8390_hdr = &ax_get_8390_hdr; ei_local->priv = 0; - ei_local->msg_enable = ax_msg_enable; dev->netdev_ops = &ax_netdev_ops; dev->ethtool_ops = &ax_ethtool_ops; diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index 5698a4c..d801c141 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -105,7 +105,6 @@ static void AX88190_init(struct net_device *dev, int startp); static int ax_open(struct net_device *dev); static int ax_close(struct net_device *dev); static irqreturn_t ax_interrupt(int irq, void *dev_id); -static u32 axnet_msg_enable; /*====================================================================*/ @@ -153,7 +152,6 @@ static int axnet_probe(struct pcmcia_device *link) return -ENOMEM; ei_local = netdev_priv(dev); - ei_local->msg_enable = axnet_msg_enable; spin_lock_init(&ei_local->page_lock); info = PRIV(dev); @@ -652,12 +650,11 @@ static void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { unsigned int nic_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); int xfer_count = count; char *buf = skb->data; - if ((netif_msg_rx_status(ei_local)) && (count != 4)) - netdev_dbg(dev, "[bi=%d]\n", count+4); + if ((ei_debug > 4) && (count != 4)) + pr_debug("%s: [bi=%d]\n", dev->name, count+4); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); @@ -813,6 +810,11 @@ module_pcmcia_driver(axnet_cs_driver); #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef ei_debug +int ei_debug = 1; +#endif + /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -923,10 +925,11 @@ static void axnet_tx_timeout(struct net_device *dev) isr = inb(e8390_base+EN0_ISR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - netdev_dbg(dev, "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", - txsr, isr, tickssofar); + netdev_printk(KERN_DEBUG, dev, + "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", + txsr, isr, tickssofar); if (!isr && !dev->stats.tx_packets) { @@ -995,30 +998,29 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx2 > 0) - netdev_dbg(dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", - ei_local->tx2, ei_local->lasttx, - ei_local->txing); + if (ei_debug && ei_local->tx2 > 0) + netdev_printk(KERN_DEBUG, dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + ei_local->tx2, ei_local->lasttx, + ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx1 > 0) - netdev_dbg(dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", - ei_local->tx1, ei_local->lasttx, - ei_local->txing); + if (ei_debug && ei_local->tx1 > 0) + netdev_printk(KERN_DEBUG, dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + ei_local->tx1, ei_local->lasttx, + ei_local->txing); } else { /* We should never get here. */ - netif_dbg(ei_local, tx_err, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, - ei_local->lasttx); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, + ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -1122,9 +1124,10 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } - - netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", - inb_p(e8390_base + EN0_ISR)); + + if (ei_debug > 3) + netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", + inb_p(e8390_base + EN0_ISR)); outb_p(0x00, e8390_base + EN0_ISR); ei_local->irqlock = 1; @@ -1134,8 +1137,9 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ++nr_serviced < MAX_SERVICE) { if (!netif_running(dev) || (interrupts == 0xff)) { - netif_warn(ei_local, intr, dev, - "interrupt from stopped card\n"); + if (ei_debug > 1) + netdev_warn(dev, + "interrupt from stopped card\n"); outb_p(interrupts, e8390_base + EN0_ISR); interrupts = 0; break; @@ -1171,15 +1175,14 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && (netif_msg_intr(ei_local))) + if (interrupts && ei_debug > 3) { handled = 1; if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ - if (interrupts != 0xFF) - netdev_warn(dev, - "Too much work at interrupt, status %#2.2x\n", + if(interrupts!=0xFF) + netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", interrupts); outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ } else { @@ -1218,7 +1221,8 @@ static void ei_tx_err(struct net_device *dev) unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); #ifdef VERBOSE_ERROR_DUMP - netdev_dbg(dev, "transmitter error (%#2x):", txsr); + netdev_printk(KERN_DEBUG, dev, + "transmitter error (%#2x):", txsr); if (txsr & ENTSR_ABT) pr_cont(" excess-collisions"); if (txsr & ENTSR_ND) @@ -1283,9 +1287,9 @@ static void ei_tx_intr(struct net_device *dev) else if (ei_local->tx2 < 0) { if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - netdev_err(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx2); + netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx2); ei_local->tx2 = 0; if (ei_local->tx1 > 0) { @@ -1362,11 +1366,9 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if ((netif_msg_rx_err(ei_local)) && - this_frame != ei_local->current_page && - (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", - this_frame, ei_local->current_page); + if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ break; /* Done for now */ @@ -1381,10 +1383,11 @@ static void ei_receive(struct net_device *dev) if (pkt_len < 60 || pkt_len > 1518) { - netif_err(ei_local, rx_err, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } @@ -1395,9 +1398,10 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - netif_err(ei_local, rx_err, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + if (ei_debug > 1) + netdev_printk(KERN_DEBUG, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } @@ -1416,10 +1420,11 @@ static void ei_receive(struct net_device *dev) } else { - netif_err(ei_local, rx_err, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -1456,7 +1461,6 @@ static void ei_rx_overrun(struct net_device *dev) axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -1464,8 +1468,9 @@ static void ei_rx_overrun(struct net_device *dev) */ was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); + + if (ei_debug > 1) + netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index b15e482a..78c6fb4 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -56,6 +56,9 @@ #define ei_inb_p(_p) readb((void __iomem *)_p) #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) +#define NET_DEBUG 0 +#define DEBUG_INIT 2 + #define DRV_NAME "etherh" #define DRV_VERSION "1.11" @@ -64,7 +67,7 @@ static char version[] __initdata = #include "lib8390.c" -static u32 etherh_msg_enable; +static unsigned int net_debug = NET_DEBUG; struct etherh_priv { void __iomem *ioc_fast; @@ -314,9 +317,9 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -358,7 +361,8 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for TX RDC\n"); + printk(KERN_ERR "%s: timeout waiting for TX RDC\n", + dev->name); etherh_reset (dev); __NS8390_init (dev, 1); break; @@ -379,9 +383,9 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -419,9 +423,9 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_get_header: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -509,8 +513,8 @@ static void __init etherh_banner(void) { static int version_printed; - if ((etherh_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - pr_info("%s", version); + if (net_debug && version_printed++ == 0) + printk(KERN_INFO "%s", version); } /* @@ -621,27 +625,11 @@ static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return 0; } -static u32 etherh_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void etherh_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops etherh_ethtool_ops = { .get_settings = etherh_get_settings, .set_settings = etherh_set_settings, .get_drvinfo = etherh_get_drvinfo, .get_ts_info = ethtool_op_get_ts_info, - .get_msglevel = etherh_get_msglevel, - .set_msglevel = etherh_set_msglevel, }; static const struct net_device_ops etherh_netdev_ops = { @@ -758,7 +746,6 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) ei_local->block_output = etherh_block_output; ei_local->get_8390_hdr = etherh_get_header; ei_local->interface_num = 0; - ei_local->msg_enable = etherh_msg_enable; etherh_reset(dev); __NS8390_init(dev, 0); @@ -767,8 +754,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) if (ret) goto free; - netdev_info(dev, "%s in slot %d, %pM\n", - data->name, ec->slot_no, dev->dev_addr); + printk(KERN_INFO "%s: %s in slot %d, %pM\n", + dev->name, data->name, ec->slot_no, dev->dev_addr); ecard_set_drvdata(ec, dev); diff --git a/drivers/net/ethernet/8390/hydra.c b/drivers/net/ethernet/8390/hydra.c index d8b86c8..fb3dd43 100644 --- a/drivers/net/ethernet/8390/hydra.c +++ b/drivers/net/ethernet/8390/hydra.c @@ -66,7 +66,6 @@ static void hydra_block_input(struct net_device *dev, int count, static void hydra_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void hydra_remove_one(struct zorro_dev *z); -static u32 hydra_msg_enable; static struct zorro_device_id hydra_zorro_tbl[] = { { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, @@ -120,7 +119,6 @@ static int hydra_init(struct zorro_dev *z) int start_page, stop_page; int j; int err; - struct ei_device *ei_local; static u32 hydra_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, @@ -139,8 +137,6 @@ static int hydra_init(struct zorro_dev *z) start_page = NESM_START_PG; stop_page = NESM_STOP_PG; - ei_local = netdev_priv(dev); - ei_local->msg_enable = hydra_msg_enable; dev->base_addr = ioaddr; dev->irq = IRQ_AMIGA_PORTS; @@ -191,16 +187,15 @@ static int hydra_open(struct net_device *dev) static int hydra_close(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); __ei_close(dev); return 0; } static void hydra_reset_8390(struct net_device *dev) { - netdev_info(dev, "Hydra hw reset not there\n"); + printk(KERN_INFO "Hydra hw reset not there\n"); } static void hydra_get_8390_hdr(struct net_device *dev, diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index d2cd804..b329f5c 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -99,6 +99,11 @@ #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef ei_debug +int ei_debug = 1; +#endif + /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -111,11 +116,6 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, static void do_set_multicast_list(struct net_device *dev); static void __NS8390_init(struct net_device *dev, int startp); -static unsigned version_printed; -static u32 msg_enable; -module_param(msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - /* * SMP and the 8390 setup. * @@ -345,23 +345,19 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, if (ei_local->tx1 == 0) { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx2 > 0) - netdev_dbg(dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + if (ei_debug && ei_local->tx2 > 0) + netdev_dbg(dev, "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", ei_local->tx2, ei_local->lasttx, ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx1 > 0) - netdev_dbg(dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + if (ei_debug && ei_local->tx1 > 0) + netdev_dbg(dev, "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", ei_local->tx1, ei_local->lasttx, ei_local->txing); } else { /* We should never get here. */ - netif_dbg(ei_local, tx_err, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, ei_local->lasttx); + if (ei_debug) + netdev_dbg(dev, "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -392,7 +388,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, } else ei_local->txqueue++; - if (ei_local->tx1 && ei_local->tx2) + if (ei_local->tx1 && ei_local->tx2) netif_stop_queue(dev); else netif_start_queue(dev); @@ -449,8 +445,9 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) /* Change to page 0 and read the intr status reg. */ ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", - ei_inb_p(e8390_base + EN0_ISR)); + if (ei_debug > 3) + netdev_dbg(dev, "interrupt(isr=%#2.2x)\n", + ei_inb_p(e8390_base + EN0_ISR)); /* !!Assumption!! -- we stay in page 0. Don't break this. */ while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 && @@ -488,7 +485,7 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); } - if (interrupts && (netif_msg_intr(ei_local))) { + if (interrupts && ei_debug) { ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ @@ -679,11 +676,10 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if ((netif_msg_rx_status(ei_local)) && + if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, - "mismatched read page pointers %2x vs %2x\n", + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ @@ -711,10 +707,10 @@ static void ei_receive(struct net_device *dev) } if (pkt_len < 60 || pkt_len > 1518) { - netif_dbg(ei_local, rx_status, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + if (ei_debug) + netdev_dbg(dev, "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -722,9 +718,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - netif_err(ei_local, rx_err, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + if (ei_debug > 1) + netdev_dbg(dev, "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } else { @@ -740,10 +736,10 @@ static void ei_receive(struct net_device *dev) dev->stats.multicast++; } } else { - netif_err(ei_local, rx_err, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + if (ei_debug) + netdev_dbg(dev, "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -793,7 +789,8 @@ static void ei_rx_overrun(struct net_device *dev) was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS; ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); + if (ei_debug > 1) + netdev_dbg(dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* @@ -968,9 +965,8 @@ static void __ei_set_multicast_list(struct net_device *dev) static void ethdev_setup(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - - if ((msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - pr_info("%s", version); + if (ei_debug > 1) + printk(version); ether_setup(dev); @@ -1039,10 +1035,9 @@ static void __NS8390_init(struct net_device *dev, int startp) ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ for (i = 0; i < 6; i++) { ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if ((netif_msg_probe(ei_local)) && + if (ei_debug > 1 && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i)) != dev->dev_addr[i]) - netdev_err(dev, - "Hw. address read/write mismap %d\n", i); + netdev_err(dev, "Hw. address read/write mismap %d\n", i); } ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 90e825e..88ccc8b 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -167,7 +167,6 @@ static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); -static u32 mac8390_msg_enable; static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) { @@ -403,7 +402,6 @@ struct net_device * __init mac8390_probe(int unit) struct net_device *dev; struct nubus_dev *ndev = NULL; int err = -ENODEV; - struct ei_device *ei_local; static unsigned int slots; @@ -442,10 +440,6 @@ struct net_device * __init mac8390_probe(int unit) if (!ndev) goto out; - - ei_local = netdev_priv(dev); - ei_local->msg_enable = mac8390_msg_enable; - err = register_netdev(dev); if (err) goto out; @@ -666,22 +660,19 @@ static int mac8390_close(struct net_device *dev) static void mac8390_no_reset(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - ei_status.txing = 0; - netif_info(ei_local, hw, dev, "reset not supported\n"); + if (ei_debug > 1) + pr_info("reset not supported\n"); } static void interlan_reset(struct net_device *dev) { unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq)); - struct ei_device *ei_local = netdev_priv(dev); - - netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...", - jiffies); + if (ei_debug > 1) + pr_info("Need to reset the NS8390 t=%lu...", jiffies); ei_status.txing = 0; target[0xC0000] = 0; - if (netif_msg_hw(ei_local)) + if (ei_debug > 1) pr_cont("reset complete\n"); } diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index df0ffca..230efd6 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -39,7 +39,6 @@ static const char version[] = #define NESM_START_PG 0x40 /* First page of TX buffer */ #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ -static u32 mcf8390_msg_enable; #ifdef NE2000_ODDOFFSET /* @@ -154,9 +153,9 @@ static void mcf8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; u32 addr = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -289,7 +288,7 @@ static void mcf8390_block_output(struct net_device *dev, int count, dma_start = jiffies; while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC\n"); + netdev_err(dev, "timeout waiting for Tx RDC\n"); mcf8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -438,7 +437,6 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev); ei_local = netdev_priv(dev); - ei_local->msg_enable = mcf8390_msg_enable; dev->irq = irq->start; dev->base_addr = mem->start; diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index 58eaa8f..b2e8405 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -71,17 +71,14 @@ static struct platform_device *pdev_ne[MAX_NE_CARDS]; static int io[MAX_NE_CARDS]; static int irq[MAX_NE_CARDS]; static int bad[MAX_NE_CARDS]; -static u32 ne_msg_enable; #ifdef MODULE module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(bad, int, NULL, 0); -module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); MODULE_PARM_DESC(irq, "IRQ number(s)"); MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); #endif /* MODULE */ @@ -217,8 +214,8 @@ static int __init do_ne_probe(struct net_device *dev) if (base_addr > 0x1ff) { /* Check a single specified location. */ int ret = ne_probe1(dev, base_addr); if (ret) - netdev_warn(dev, "ne.c: No NE*000 card found at " - "i/o = %#lx\n", base_addr); + printk(KERN_WARNING "ne.c: No NE*000 card found at " + "i/o = %#lx\n", base_addr); return ret; } else if (base_addr != 0) /* Don't probe at all. */ @@ -267,14 +264,11 @@ static int __init ne_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - netdev_info(dev, - "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) isapnp_clone_list[i].driver_data, - dev->base_addr, dev->irq); + printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) isapnp_clone_list[i].driver_data, + dev->base_addr, dev->irq); if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - netdev_err(dev, - "ne.c: Probe of ISAPnP card at %#lx failed.\n", - dev->base_addr); + printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); pnp_device_detach(idev); return -ENXIO; } @@ -299,7 +293,6 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) int neX000, ctron, copam, bad_card; int reg0, ret; static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -326,10 +319,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } } - if ((ne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, "%s%s", version1, version2); + if (ei_debug && version_printed++ == 0) + printk(KERN_INFO "%s%s", version1, version2); - netdev_info(dev, "NE*000 ethercard probe at %#3lx:", ioaddr); + printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); /* A user with a poor card that fails to ack the reset, or that does not have a valid 0x57,0x57 signature can still use this @@ -350,10 +343,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { if (bad_card) { - pr_cont(" (warning: no reset ack)"); + printk(" (warning: no reset ack)"); break; } else { - pr_cont(" not found (no reset ack).\n"); + printk(" not found (no reset ack).\n"); ret = -ENODEV; goto err_out; } @@ -461,13 +454,13 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (bad_clone_list[i].name8 == NULL) { - pr_cont(" not found (invalid signature %2.2x %2.2x).\n", + printk(" not found (invalid signature %2.2x %2.2x).\n", SA_prom[14], SA_prom[15]); ret = -ENXIO; goto err_out; } #else - pr_cont(" not found.\n"); + printk(" not found.\n"); ret = -ENXIO; goto err_out; #endif @@ -483,15 +476,15 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) mdelay(10); /* wait 10ms for interrupt to propagate */ outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */ dev->irq = probe_irq_off(cookie); - if (netif_msg_probe(ei_local)) - pr_cont(" autoirq is %d", dev->irq); + if (ei_debug > 2) + printk(" autoirq is %d\n", dev->irq); } else if (dev->irq == 2) /* Fixup for users that don't know that IRQ 2 is really IRQ 9, or don't know which one to set. */ dev->irq = 9; if (! dev->irq) { - pr_cont(" failed to detect IRQ line.\n"); + printk(" failed to detect IRQ line.\n"); ret = -EAGAIN; goto err_out; } @@ -500,7 +493,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) share and the board will usually be enabled. */ ret = request_irq(dev->irq, eip_interrupt, 0, name, dev); if (ret) { - pr_cont(" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); + printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); goto err_out; } @@ -519,7 +512,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } #endif - pr_cont("%pM\n", dev->dev_addr); + printk("%pM\n", dev->dev_addr); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -543,12 +536,11 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) dev->netdev_ops = &eip_netdev_ops; NS8390p_init(dev, 0); - ei_local->msg_enable = ne_msg_enable; ret = register_netdev(dev); if (ret) goto out_irq; - netdev_info(dev, "%s found at %#lx, using IRQ %d.\n", - name, ioaddr, dev->irq); + printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n", + dev->name, name, ioaddr, dev->irq); return 0; out_irq: @@ -564,9 +556,9 @@ err_out: static void ne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies); /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -577,7 +569,7 @@ static void ne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - netdev_err(dev, "ne_reset_8390() did not complete.\n"); + printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name); break; } outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -595,9 +587,9 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, i if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } @@ -629,7 +621,6 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk { #ifdef NE_SANITY_CHECK int xfer_count = count; - struct ei_device *ei_local = netdev_priv(dev); #endif int nic_base = dev->base_addr; char *buf = skb->data; @@ -637,9 +628,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -669,7 +660,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk this message you either 1) have a slightly incompatible clone or 2) have noise/speed problems with your bus. */ - if (netif_msg_rx_status(ei_local)) + if (ei_debug > 1) { /* DMA termination address check... */ int addr, tries = 20; @@ -683,9 +674,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk break; } while (--tries > 0); if (tries <= 0) - netdev_warn(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + printk(KERN_WARNING "%s: RX transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + dev->name, ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -699,7 +690,6 @@ static void ne_block_output(struct net_device *dev, int count, unsigned long dma_start; #ifdef NE_SANITY_CHECK int retries = 0; - struct ei_device *ei_local = netdev_priv(dev); #endif /* Round the count up for word writes. Do we need to do this? @@ -712,9 +702,9 @@ static void ne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d]\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -761,7 +751,7 @@ retry: /* This was for the ALPHA version only, but enough people have been encountering problems so it is still here. */ - if (netif_msg_tx_queued(ei_local)) + if (ei_debug > 1) { /* DMA termination address check... */ int addr, tries = 20; @@ -775,9 +765,9 @@ retry: if (tries <= 0) { - netdev_warn(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + printk(KERN_WARNING "%s: Tx packet transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + dev->name, (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -786,7 +776,7 @@ retry: while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); NS8390p_init(dev, 1); break; @@ -946,8 +936,8 @@ int __init init_module(void) retval = platform_driver_probe(&ne_driver, ne_drv_probe); if (retval) { if (io[0] == 0) - pr_notice("ne.c: You must supply \"io=0xNNN\"" - " value(s) for ISA cards.\n"); + printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\"" + " value(s) for ISA cards.\n"); ne_loop_rm_unreg(1); return retval; } diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index f395c96..fc14a85 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -33,6 +33,8 @@ /* The user-configurable values. These may be modified when a driver module is loaded.*/ +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ + #define MAX_UNITS 8 /* More are supported, limit only on options */ /* Used to pass the full-duplex flag, etc. */ static int full_duplex[MAX_UNITS]; @@ -58,8 +60,6 @@ static int options[MAX_UNITS]; #include "8390.h" -static u32 ne2k_msg_enable; - /* These identify the driver base version and may not be removed. */ static const char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE @@ -76,10 +76,10 @@ MODULE_AUTHOR("Donald Becker / Paul Gortmaker"); MODULE_DESCRIPTION("PCI NE2000 clone driver"); MODULE_LICENSE("GPL"); -module_param_named(msg_enable, ne2k_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +module_param(debug, int, 0); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); +MODULE_PARM_DESC(debug, "debug level (1-2)"); MODULE_PARM_DESC(options, "Bit 5: full duplex"); MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); @@ -226,7 +226,6 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, static unsigned int fnd_cnt; long ioaddr; int flags = pci_clone_list[chip_idx].flags; - struct ei_device *ei_local; /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -281,8 +280,6 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, goto err_out_free_res; } dev->netdev_ops = &ne2k_netdev_ops; - ei_local = netdev_priv(dev); - ei_local->msg_enable = ne2k_msg_enable; SET_NETDEV_DEV(dev, &pdev->dev); @@ -382,9 +379,9 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (i) goto err_out_free_netdev; - netdev_info(dev, "%s found at %#lx, IRQ %d, %pM.\n", - pci_clone_list[chip_idx].name, ioaddr, dev->irq, - dev->dev_addr); + printk("%s: %s found at %#lx, IRQ %d, %pM.\n", + dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, + dev->dev_addr); return 0; @@ -453,10 +450,9 @@ static int ne2k_pci_close(struct net_device *dev) static void ne2k_pci_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", - jiffies); + if (debug > 1) printk("%s: Resetting the 8390 t=%ld...", + dev->name, jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -466,7 +462,7 @@ static void ne2k_pci_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (jiffies - reset_start_time > 2) { - netdev_err(dev, "ne2k_pci_reset_8390() did not complete.\n"); + printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name); break; } outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -483,9 +479,9 @@ static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr * /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_get_8390_hdr " + printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr " "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } @@ -521,9 +517,9 @@ static void ne2k_pci_block_input(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_block_input " + printk("%s: DMAing conflict in ne2k_pci_block_input " "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -576,9 +572,9 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_block_output." + printk("%s: DMAing conflict in ne2k_pci_block_output." "[DMAstat:%d][irqlock:%d]\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -623,7 +619,7 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne2k_pci_reset_8390(dev); NS8390_init(dev,1); break; @@ -644,24 +640,8 @@ static void ne2k_pci_get_drvinfo(struct net_device *dev, strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); } -static u32 ne2k_pci_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void ne2k_pci_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, - .get_msglevel = ne2k_pci_get_msglevel, - .set_msglevel = ne2k_pci_set_msglevel, }; static void ne2k_pci_remove_one(struct pci_dev *pdev) diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index eea33d6..46c5aad 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -67,7 +67,7 @@ #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ static const char *if_names[] = { "auto", "10baseT", "10base2"}; -static u32 pcnet_msg_enable; + /*====================================================================*/ @@ -558,7 +558,6 @@ static int pcnet_config(struct pcmcia_device *link) int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; - struct ei_device *ei_local; dev_dbg(&link->dev, "pcnet_config\n"); @@ -608,8 +607,6 @@ static int pcnet_config(struct pcmcia_device *link) mii_phy_probe(dev); SET_NETDEV_DEV(dev, &link->dev); - ei_local = netdev_priv(dev); - ei_local->msg_enable = pcnet_msg_enable; if (register_netdev(dev) != 0) { pr_notice("register_netdev() failed\n"); @@ -619,7 +616,7 @@ static int pcnet_config(struct pcmcia_device *link) if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); netdev_info(dev, "NE2000 (DL100%d rev %02x): ", - (info->flags & IS_DL10022) ? 22 : 19, id); + (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) pr_cont("PNA, "); } else { @@ -1066,9 +1063,9 @@ static void ei_watchdog(u_long arg) if (info->phy_id == info->eth_phy) { if (p) netdev_info(dev, "autonegotiation complete: " - "%sbaseT-%cD selected\n", - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); + "%sbaseT-%cD selected\n", + ((p & 0x0180) ? "100" : "10"), + ((p & 0x0140) ? 'F' : 'H')); else netdev_info(dev, "link partner did not autonegotiate\n"); } @@ -1084,7 +1081,7 @@ static void ei_watchdog(u_long arg) mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; netdev_info(dev, "switched to %s transceiver\n", - (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); + (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); info->link_status = 0; @@ -1131,9 +1128,9 @@ static void dma_get_8390_hdr(struct net_device *dev, unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -1162,14 +1159,13 @@ static void dma_block_input(struct net_device *dev, int count, unsigned int nic_base = dev->base_addr; int xfer_count = count; char *buf = skb->data; - struct ei_device *ei_local = netdev_priv(dev); - if ((netif_msg_rx_status(ei_local)) && (count != 4)) + if ((ei_debug > 4) && (count != 4)) netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1187,8 +1183,7 @@ static void dma_block_input(struct net_device *dev, int count, /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ #ifdef PCMCIA_DEBUG - /* DMA termination address check... */ - if (netif_msg_rx_status(ei_local)) { + if (ei_debug > 4) { /* DMA termination address check... */ int addr, tries = 20; do { /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here @@ -1201,8 +1196,8 @@ static void dma_block_input(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) netdev_notice(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -1218,12 +1213,12 @@ static void dma_block_output(struct net_device *dev, int count, pcnet_dev_t *info = PRIV(dev); #ifdef PCMCIA_DEBUG int retries = 0; - struct ei_device *ei_local = netdev_priv(dev); #endif u_long dma_start; #ifdef PCMCIA_DEBUG - netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); + if (ei_debug > 4) + netdev_dbg(dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? @@ -1232,9 +1227,9 @@ static void dma_block_output(struct net_device *dev, int count, if (count & 0x01) count++; if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_output." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_output." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1261,8 +1256,7 @@ static void dma_block_output(struct net_device *dev, int count, #ifdef PCMCIA_DEBUG /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ - /* DMA termination address check... */ - if (netif_msg_tx_queued(ei_local)) { + if (ei_debug > 4) { /* DMA termination address check... */ int addr, tries = 20; do { int high = inb_p(nic_base + EN0_RSARHI); @@ -1273,8 +1267,8 @@ static void dma_block_output(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) { netdev_notice(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -1283,10 +1277,10 @@ static void dma_block_output(struct net_device *dev, int count, while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - break; + netdev_notice(dev, "timeout waiting for Tx RDC.\n"); + pcnet_reset_8390(dev); + NS8390_init(dev, 1); + break; } outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 139385d..b0fbce3 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -111,7 +111,6 @@ static struct isapnp_device_id ultra_device_ids[] __initdata = { MODULE_DEVICE_TABLE(isapnp, ultra_device_ids); #endif -static u32 ultra_msg_enable; #define START_PG 0x00 /* First page of TX buffer */ @@ -212,7 +211,6 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) unsigned char num_pages, irqreg, addr, piomode; unsigned char idreg = inb(ioaddr + 7); unsigned char reg4 = inb(ioaddr + 4) & 0x7f; - struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -234,16 +232,16 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) goto out; } - if ((ultra_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ"; for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - netdev_info(dev, "%s at %#3x, %pM", model_name, - ioaddr, dev->dev_addr); + printk("%s: %s at %#3x, %pM", dev->name, model_name, + ioaddr, dev->dev_addr); /* Switch from the station address to the alternate register set and read the useful registers there. */ @@ -267,7 +265,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)]; if (irq == 0) { - pr_cont(", failed to detect IRQ line.\n"); + printk(", failed to detect IRQ line.\n"); retval = -EAGAIN; goto out; } @@ -298,7 +296,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256); if (!ei_status.mem) { - pr_cont(", failed to ioremap.\n"); + printk(", failed to ioremap.\n"); retval = -ENOMEM; goto out; } @@ -306,15 +304,14 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256; if (piomode) { - pr_cont(", %s IRQ %d programmed-I/O mode.\n", - eeprom_irq ? "EEPROM" : "assigned ", dev->irq); + printk(",%s IRQ %d programmed-I/O mode.\n", + eeprom_irq ? "EEPROM" : "assigned ", dev->irq); ei_status.block_input = &ultra_pio_input; ei_status.block_output = &ultra_pio_output; ei_status.get_8390_hdr = &ultra_pio_get_hdr; } else { - pr_cont(", %s IRQ %d memory %#lx-%#lx.\n", - eeprom_irq ? "" : "assigned ", dev->irq, dev->mem_start, - dev->mem_end-1); + printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ", + dev->irq, dev->mem_start, dev->mem_end-1); ei_status.block_input = &ultra_block_input; ei_status.block_output = &ultra_block_output; ei_status.get_8390_hdr = &ultra_get_8390_hdr; @@ -323,7 +320,6 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &ultra_netdev_ops; NS8390_init(dev, 0); - ei_local->msg_enable = ultra_msg_enable; retval = register_netdev(dev); if (retval) @@ -360,15 +356,12 @@ static int __init ultra_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - netdev_info(dev, - "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) ultra_device_ids[i].driver_data, - dev->base_addr, dev->irq); + printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) ultra_device_ids[i].driver_data, + dev->base_addr, dev->irq); if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - netdev_err(dev, - "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", - dev->base_addr); - pnp_device_detach(idev); + printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); + pnp_device_detach(idev); return -ENXIO; } ei_status.priv = (unsigned long)idev; @@ -419,10 +412,9 @@ static void ultra_reset_8390(struct net_device *dev) { int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */ - struct ei_device *ei_local = netdev_priv(dev); outb(ULTRA_RESET, cmd_port); - netif_dbg(ei_local, hw, dev, "resetting Ultra, t=%ld...\n", jiffies); + if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies); ei_status.txing = 0; outb(0x00, cmd_port); /* Disable shared memory for safety. */ @@ -432,7 +424,7 @@ ultra_reset_8390(struct net_device *dev) else outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */ - netif_dbg(ei_local, hw, dev, "reset done\n"); + if (ei_debug > 1) printk("reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -538,11 +530,11 @@ static int ultra_close_card(struct net_device *dev) { int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); netif_stop_queue(dev); - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk("%s: Shutting down ethercard.\n", dev->name); outb(0x00, ioaddr + 6); /* Disable interrupts. */ free_irq(dev->irq, dev); @@ -564,10 +556,8 @@ static int irq[MAX_ULTRA_CARDS]; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); -module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index aca957d..8df4c41 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -69,11 +69,6 @@ static void stnic_block_output (struct net_device *dev, int count, static void stnic_init (struct net_device *dev); -static u32 stnic_msg_enable; - -module_param_named(msg_enable, stnic_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - /* SH7750 specific read/write io. */ static inline void STNIC_DELAY (void) @@ -105,7 +100,6 @@ static int __init stnic_probe(void) { struct net_device *dev; int i, err; - struct ei_device *ei_local; /* If we are not running on a SolutionEngine, give up now */ if (! MACH_SE) @@ -131,10 +125,10 @@ static int __init stnic_probe(void) share and the board will usually be enabled. */ err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (err) { - netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq); - free_netdev(dev); - return err; - } + printk (KERN_EMERG " unable to get IRQ %d.\n", dev->irq); + free_netdev(dev); + return err; + } ei_status.name = dev->name; ei_status.word16 = 1; @@ -153,8 +147,6 @@ static int __init stnic_probe(void) ei_status.block_output = &stnic_block_output; stnic_init (dev); - ei_local = netdev_priv(dev); - ei_local->msg_enable = stnic_msg_enable; err = register_netdev(dev); if (err) { @@ -164,7 +156,7 @@ static int __init stnic_probe(void) } stnic_dev = dev; - netdev_info(dev, "NS ST-NIC 83902A\n"); + printk (KERN_INFO "NS ST-NIC 83902A\n"); return 0; } @@ -172,11 +164,10 @@ static int __init stnic_probe(void) static void stnic_reset (struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - *(vhalf *) PA_83902_RST = 0; udelay (5); - netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies); + if (ei_debug > 1) + printk (KERN_WARNING "8390 reset done (%ld).\n", jiffies); *(vhalf *) PA_83902_RST = ~0; udelay (5); } @@ -185,8 +176,6 @@ static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { - struct ei_device *ei_local = netdev_priv(dev); - half buf[2]; STNIC_WRITE (PG0_RSAR0, 0); @@ -207,7 +196,8 @@ stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8); #endif - netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n", + if (ei_debug > 1) + printk (KERN_DEBUG "ring %x status %02x next %02x count %04x.\n", ring_page, hdr->status, hdr->next, hdr->count); STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index dd7d816..03eb3ee 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -60,7 +60,6 @@ static void wd_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static int wd_close(struct net_device *dev); -static u32 wd_msg_enable; #define WD_START_PG 0x00 /* First page of TX buffer */ #define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */ @@ -171,7 +170,6 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */ const char *model_name; static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); for (i = 0; i < 8; i++) checksum += inb(ioaddr + 8 + i); @@ -182,19 +180,19 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) /* Check for semi-valid mem_start/end values if supplied. */ if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) { - netdev_warn(dev, - "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); + printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); dev->mem_start = 0; dev->mem_end = 0; } - if ((wd_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - netdev_info(dev, "WD80x3 at %#3x, %pM", ioaddr, dev->dev_addr); + printk("%s: WD80x3 at %#3x, %pM", + dev->name, ioaddr, dev->dev_addr); /* The following PureData probe code was contributed by Mike Jagdis . Puredata does software @@ -246,9 +244,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) } #ifndef final_version if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01)) - pr_cont("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", - word16 ? 16 : 8, - (inb(ioaddr+1) & 0x01) ? 16 : 8); + printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", + word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8); #endif } @@ -262,7 +259,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) if (reg0 == 0xff || reg0 == 0) { /* Future plan: this could check a few likely locations first. */ dev->mem_start = 0xd0000; - pr_cont(" assigning address %#lx", dev->mem_start); + printk(" assigning address %#lx", dev->mem_start); } else { int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f; /* Some boards don't have the register 5 -- it returns 0xff. */ @@ -300,8 +297,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */ - if (netif_msg_drv(ei_local)) - pr_cont(" autoirq is %d", dev->irq); + if (ei_debug > 2) + printk(" autoirq is %d", dev->irq); if (dev->irq < 2) dev->irq = word16 ? 10 : 5; } else @@ -313,7 +310,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) share and the board will usually be enabled. */ i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (i) { - pr_cont(" unable to get IRQ %d.\n", dev->irq); + printk (" unable to get IRQ %d.\n", dev->irq); return i; } @@ -341,8 +338,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) return -ENOMEM; } - pr_cont(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", - model_name, dev->irq, dev->mem_start, dev->mem_end-1); + printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", + model_name, dev->irq, dev->mem_start, dev->mem_end-1); ei_status.reset_8390 = wd_reset_8390; ei_status.block_input = wd_block_input; @@ -351,7 +348,6 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &wd_netdev_ops; NS8390_init(dev, 0); - ei_local->msg_enable = wd_msg_enable; #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ @@ -389,11 +385,9 @@ static void wd_reset_8390(struct net_device *dev) { int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); outb(WD_RESET, wd_cmd_port); - netif_dbg(ei_local, hw, dev, "resetting the WD80x3 t=%lu...\n", - jiffies); + if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies); ei_status.txing = 0; /* Set up the ASIC registers, just in case something changed them. */ @@ -401,7 +395,7 @@ wd_reset_8390(struct net_device *dev) if (ei_status.word16) outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); - netif_dbg(ei_local, hw, dev, "reset done\n"); + if (ei_debug > 1) printk("reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -480,9 +474,9 @@ static int wd_close(struct net_device *dev) { int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk("%s: Shutting down ethercard.\n", dev->name); ei_close(dev); /* Change from 16-bit to 8-bit shared memory so reboot works. */ @@ -508,12 +502,10 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param_array(mem_end, int, NULL, 0); -module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)"); MODULE_PARM_DESC(mem_end, "memory end address(es)"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index 7b373e65..85ec4c2 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -44,8 +44,6 @@ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; -static u32 zorro8390_msg_enable; - #include "lib8390.c" #define DRV_NAME "zorro8390" @@ -88,9 +86,9 @@ static struct card_info { static void zorro8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting - t=%ld...\n", jiffies); z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -121,9 +119,8 @@ static void zorro8390_get_8390_hdr(struct net_device *dev, * If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_warn(dev, - "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", - __func__, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); return; } @@ -233,7 +230,7 @@ static void zorro8390_block_output(struct net_device *dev, int count, while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC\n"); + netdev_err(dev, "timeout waiting for Tx RDC\n"); zorro8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -251,9 +248,8 @@ static int zorro8390_open(struct net_device *dev) static int zorro8390_close(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); + if (ei_debug > 1) + netdev_dbg(dev, "Shutting down ethercard\n"); __ei_close(dev); return 0; } @@ -297,7 +293,6 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, int err; unsigned char SA_prom[32]; int start_page, stop_page; - struct ei_device *ei_local = netdev_priv(dev); static u32 zorro8390_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, @@ -388,9 +383,6 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, dev->netdev_ops = &zorro8390_netdev_ops; __NS8390_init(dev, 0); - - ei_local->msg_enable = zorro8390_msg_enable; - err = register_netdev(dev); if (err) { free_irq(IRQ_AMIGA_PORTS, dev); -- cgit v0.10.2 From 506cac15ac86f204b83e3cfccde73eeb4e7c5f34 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Sat, 16 Nov 2013 16:47:50 +0400 Subject: ARM: pxa: tosa: fix keys mapping When converting from tosa-keyboard driver to matrix keyboard, tosa keys received extra 1 column shift. Replace that with correct values to make keyboard work again. Fixes: f69a6548c9d5 ('[ARM] pxa/tosa: make use of the matrix keypad driver') Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Haojian Zhuang Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 0206b91..ef5557b 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = { * Tosa Keyboard */ static const uint32_t tosakbd_keymap[] = { - KEY(0, 2, KEY_W), - KEY(0, 6, KEY_K), - KEY(0, 7, KEY_BACKSPACE), - KEY(0, 8, KEY_P), - KEY(1, 1, KEY_Q), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_T), - KEY(1, 4, KEY_Y), - KEY(1, 6, KEY_O), - KEY(1, 7, KEY_I), - KEY(1, 8, KEY_COMMA), - KEY(2, 1, KEY_A), - KEY(2, 2, KEY_D), - KEY(2, 3, KEY_G), - KEY(2, 4, KEY_U), - KEY(2, 6, KEY_L), - KEY(2, 7, KEY_ENTER), - KEY(2, 8, KEY_DOT), - KEY(3, 1, KEY_Z), - KEY(3, 2, KEY_C), - KEY(3, 3, KEY_V), - KEY(3, 4, KEY_J), - KEY(3, 5, TOSA_KEY_ADDRESSBOOK), - KEY(3, 6, TOSA_KEY_CANCEL), - KEY(3, 7, TOSA_KEY_CENTER), - KEY(3, 8, TOSA_KEY_OK), - KEY(3, 9, KEY_LEFTSHIFT), - KEY(4, 1, KEY_S), - KEY(4, 2, KEY_R), - KEY(4, 3, KEY_B), - KEY(4, 4, KEY_N), - KEY(4, 5, TOSA_KEY_CALENDAR), - KEY(4, 6, TOSA_KEY_HOMEPAGE), - KEY(4, 7, KEY_LEFTCTRL), - KEY(4, 8, TOSA_KEY_LIGHT), - KEY(4, 10, KEY_RIGHTSHIFT), - KEY(5, 1, KEY_TAB), - KEY(5, 2, KEY_SLASH), - KEY(5, 3, KEY_H), - KEY(5, 4, KEY_M), - KEY(5, 5, TOSA_KEY_MENU), - KEY(5, 7, KEY_UP), - KEY(5, 11, TOSA_KEY_FN), - KEY(6, 1, KEY_X), - KEY(6, 2, KEY_F), - KEY(6, 3, KEY_SPACE), - KEY(6, 4, KEY_APOSTROPHE), - KEY(6, 5, TOSA_KEY_MAIL), - KEY(6, 6, KEY_LEFT), - KEY(6, 7, KEY_DOWN), - KEY(6, 8, KEY_RIGHT), + KEY(0, 1, KEY_W), + KEY(0, 5, KEY_K), + KEY(0, 6, KEY_BACKSPACE), + KEY(0, 7, KEY_P), + KEY(1, 0, KEY_Q), + KEY(1, 1, KEY_E), + KEY(1, 2, KEY_T), + KEY(1, 3, KEY_Y), + KEY(1, 5, KEY_O), + KEY(1, 6, KEY_I), + KEY(1, 7, KEY_COMMA), + KEY(2, 0, KEY_A), + KEY(2, 1, KEY_D), + KEY(2, 2, KEY_G), + KEY(2, 3, KEY_U), + KEY(2, 5, KEY_L), + KEY(2, 6, KEY_ENTER), + KEY(2, 7, KEY_DOT), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_C), + KEY(3, 2, KEY_V), + KEY(3, 3, KEY_J), + KEY(3, 4, TOSA_KEY_ADDRESSBOOK), + KEY(3, 5, TOSA_KEY_CANCEL), + KEY(3, 6, TOSA_KEY_CENTER), + KEY(3, 7, TOSA_KEY_OK), + KEY(3, 8, KEY_LEFTSHIFT), + KEY(4, 0, KEY_S), + KEY(4, 1, KEY_R), + KEY(4, 2, KEY_B), + KEY(4, 3, KEY_N), + KEY(4, 4, TOSA_KEY_CALENDAR), + KEY(4, 5, TOSA_KEY_HOMEPAGE), + KEY(4, 6, KEY_LEFTCTRL), + KEY(4, 7, TOSA_KEY_LIGHT), + KEY(4, 9, KEY_RIGHTSHIFT), + KEY(5, 0, KEY_TAB), + KEY(5, 1, KEY_SLASH), + KEY(5, 2, KEY_H), + KEY(5, 3, KEY_M), + KEY(5, 4, TOSA_KEY_MENU), + KEY(5, 6, KEY_UP), + KEY(5, 10, TOSA_KEY_FN), + KEY(6, 0, KEY_X), + KEY(6, 1, KEY_F), + KEY(6, 2, KEY_SPACE), + KEY(6, 3, KEY_APOSTROPHE), + KEY(6, 4, TOSA_KEY_MAIL), + KEY(6, 5, KEY_LEFT), + KEY(6, 6, KEY_DOWN), + KEY(6, 7, KEY_RIGHT), }; static struct matrix_keymap_data tosakbd_keymap_data = { -- cgit v0.10.2 From ff88b4724fde18056a4c539f7327389aec0f4c2d Mon Sep 17 00:00:00 2001 From: Sergei Ianovich Date: Tue, 10 Dec 2013 08:39:15 +0400 Subject: ARM: pxa: prevent PXA270 occasional reboot freezes Erratum 71 of PXA270M Processor Family Specification Update (April 19, 2010) explains that watchdog reset time is just 8us insead of 10ms in EMTS. If SDRAM is not reset, it causes memory bus congestion and the device hangs. We put SDRAM in selfresh mode before watchdog reset, removing potential freezes. Without this patch PXA270-based ICP DAS LP-8x4x hangs after up to 40 reboots. With this patch it has successfully rebooted 500 times. Signed-off-by: Sergei Ianovich Tested-by: Marek Vasut Signed-off-by: Haojian Zhuang Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 0d5dd64..263b152 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -13,6 +13,7 @@ #include #include +#include unsigned int reset_status; EXPORT_SYMBOL(reset_status); @@ -81,6 +82,12 @@ static void do_hw_reset(void) writel_relaxed(OSSR_M3, OSSR); /* ... in 100 ms */ writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3); + /* + * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71) + * we put SDRAM into self-refresh to prevent that + */ + while (1) + writel_relaxed(MDREFR_SLFRSH, MDREFR); } void pxa_restart(enum reboot_mode mode, const char *cmd) @@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd) break; } } - -- cgit v0.10.2 From b988ba1b4eba12008107b16fe3714293afdca47e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 6 Dec 2013 14:31:02 -0700 Subject: ARM: tegra: add missing break to fuse initialization code Add a missing break to the switch in tegra_init_fuse() which determines which SoC the code is running on. This prevents the Tegra30+ fuse handling code from running on Tegra20. Fixes: 3bd1ae57f7bb ("ARM: tegra: add fuses as device randomness") Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 9a4e910..3a9c1f1 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -198,10 +198,12 @@ void __init tegra_init_fuse(void) switch (tegra_chip_id) { case TEGRA20: tegra20_fuse_init_randomness(); + break; case TEGRA30: case TEGRA114: default: tegra30_fuse_init_randomness(); + break; } pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", -- cgit v0.10.2 From 2a82f95c3fb4904a473e205f3510b6e8884dd34d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 10 Dec 2013 22:19:21 +0800 Subject: MAINTAINERS: merge IMX6 entry into IMX I have been co-maintaining IMX sub-architecture for a couple of years, and collecting IMX sub-architecture patches rather than IMX6 only ones for a few release cycles. It makes sense to officially add myself as the co-maintainer for IMX sub-architecture now. Consequently, IMX6 entry can just be merged into IMX. While at it, add a 'F:' entry for IMX DTS files. Signed-off-by: Shawn Guo Acked-by: Sascha Hauer Signed-off-by: Olof Johansson diff --git a/MAINTAINERS b/MAINTAINERS index 13c15c8..1db9044 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -893,20 +893,15 @@ F: arch/arm/include/asm/hardware/dec21285.h F: arch/arm/mach-footbridge/ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +M: Shawn Guo M: Sascha Hauer L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -T: git git://git.pengutronix.de/git/imx/linux-2.6.git +T: git git://git.linaro.org/people/shawnguo/linux-2.6.git F: arch/arm/mach-imx/ +F: arch/arm/boot/dts/imx* F: arch/arm/configs/imx*_defconfig -ARM/FREESCALE IMX6 -M: Shawn Guo -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -T: git git://git.linaro.org/people/shawnguo/linux-2.6.git -F: arch/arm/mach-imx/*imx6* - ARM/FREESCALE MXS ARM ARCHITECTURE M: Shawn Guo L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 378d0aee3b53bd8549b29dcc75f2bf47ee446e8f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 10 Dec 2013 19:37:21 +0100 Subject: ARM: sun7i: dt: Fix interrupt trigger types The Allwinner A20 uses the ARM GIC as its internal interrupts controller. The GIC can work on several interrupt triggers, and the A20 was actually setting it up to use a rising edge as a trigger, while it was actually a level high trigger, leading to some interrupts that would be completely ignored if the edge was missed. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede Cc: stable@vger.kernel.org #3.12+ Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e46cfed..367611a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -170,7 +170,7 @@ emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 1>; + interrupts = <0 55 4>; clocks = <&ahb_gates 17>; status = "disabled"; }; @@ -186,7 +186,7 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 1>; + interrupts = <0 28 4>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -251,12 +251,12 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 1>, - <0 23 1>, - <0 24 1>, - <0 25 1>, - <0 67 1>, - <0 68 1>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; clocks = <&osc24M>; }; @@ -273,7 +273,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -283,7 +283,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -293,7 +293,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -303,7 +303,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -313,7 +313,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 1>; + interrupts = <0 17 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -323,7 +323,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 1>; + interrupts = <0 18 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -333,7 +333,7 @@ uart6: serial@01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 1>; + interrupts = <0 19 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>; @@ -343,7 +343,7 @@ uart7: serial@01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 1>; + interrupts = <0 20 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>; @@ -353,7 +353,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 1>; + interrupts = <0 7 4>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; @@ -362,7 +362,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 1>; + interrupts = <0 8 4>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; @@ -371,7 +371,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 1>; + interrupts = <0 9 4>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; @@ -380,7 +380,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 1>; + interrupts = <0 88 4>; clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; @@ -389,7 +389,7 @@ i2c4: i2c@01c2bc00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2bc00 0x400>; - interrupts = <0 89 1>; + interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; -- cgit v0.10.2 From 6f97dc8d4663abed96fa30e3ea4a1d4cfd1c4276 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 10 Dec 2013 19:37:22 +0100 Subject: ARM: sun6i: dt: Fix interrupt trigger types The Allwinner A31 uses the ARM GIC as its internal interrupts controller. The GIC can work on several interrupt triggers, and the A31 was actually setting it up to use a rising edge as a trigger, while it was actually a level high trigger, leading to some interrupts that would be completely ignored if the edge was missed. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c1751a6..7f5878c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -193,7 +193,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -212,11 +215,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 1>, - <0 19 1>, - <0 20 1>, - <0 21 1>, - <0 22 1>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>; clocks = <&osc24M>; }; @@ -228,7 +231,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 1>; + interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -238,7 +241,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -248,7 +251,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -258,7 +261,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -268,7 +271,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -278,7 +281,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 1>; + interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; -- cgit v0.10.2 From a1bf1750871a6f242b0fdb174cc55d2c57e7ed66 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Wed, 11 Dec 2013 23:50:52 +0100 Subject: net:fec: remove duplicate lines in comment about errata ERR006358 commit 031916568a1aa2ef1809f86d26f0bcfa215ff5c0 worked around errata ERR006358, but comment contains duplicated lines, impairing the readability. Remove them. Signed-off-by: Philippe De Muyter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 73b000d..e7c8b74 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -98,10 +98,6 @@ static void set_multicast_list(struct net_device *ndev); * detected as not set during a prior frame transmission, then the * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in - * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously - * detected as not set during a prior frame transmission, then the - * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs - * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in * frames not being transmitted until there is a 0-to-1 transition on * ENET_TDAR[TDAR]. */ -- cgit v0.10.2 From 975022310233fb0f0193873d79a7b8438070fa82 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 11 Dec 2013 14:46:51 -0800 Subject: udp: ipv4: must add synchronization in udp_sk_rx_dst_set() Unlike TCP, UDP input path does not hold the socket lock. Before messing with sk->sk_rx_dst, we must use a spinlock, otherwise multiple cpus could leak a refcount. This patch also takes care of renewing a stale dst entry. (When the sk->sk_rx_dst would not be used by IP early demux) Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet Cc: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 16d246a..62c19fd 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1599,12 +1599,21 @@ static void flush_stack(struct sock **stack, unsigned int count, kfree_skb(skb1); } -static void udp_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +/* For TCP sockets, sk_rx_dst is protected by socket lock + * For UDP, we use sk_dst_lock to guard against concurrent changes. + */ +static void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst) { - struct dst_entry *dst = skb_dst(skb); + struct dst_entry *old; - dst_hold(dst); - sk->sk_rx_dst = dst; + spin_lock(&sk->sk_dst_lock); + old = sk->sk_rx_dst; + if (likely(old != dst)) { + dst_hold(dst); + sk->sk_rx_dst = dst; + dst_release(old); + } + spin_unlock(&sk->sk_dst_lock); } /* @@ -1737,10 +1746,11 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, sk = skb_steal_sock(skb); if (sk) { + struct dst_entry *dst = skb_dst(skb); int ret; - if (unlikely(sk->sk_rx_dst == NULL)) - udp_sk_rx_dst_set(sk, skb); + if (unlikely(sk->sk_rx_dst != dst)) + udp_sk_rx_dst_set(sk, dst); ret = udp_queue_rcv_skb(sk, skb); sock_put(sk); -- cgit v0.10.2 From d55d282e6af88120ad90e93a88f70e3116dc0e3d Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 12 Dec 2013 10:57:22 +0800 Subject: sch_tbf: use do_div() for 64-bit divide It's doing a 64-bit divide which is not supported on 32-bit architectures in psched_ns_t2l(). The correct way to do this is to use do_div(). It's introduced by commit cc106e441a63 ("net: sched: tbf: fix the calculation of max_size") Reported-by: kbuild test robot Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index a44928c..887e672 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -131,8 +131,10 @@ static u64 psched_ns_t2l(const struct psched_ratecfg *r, do_div(len, NSEC_PER_SEC); - if (unlikely(r->linklayer == TC_LINKLAYER_ATM)) - len = (len / 53) * 48; + if (unlikely(r->linklayer == TC_LINKLAYER_ATM)) { + do_div(len, 53); + len = len * 48; + } if (len > r->overhead) len -= r->overhead; -- cgit v0.10.2 From 3d489ac07ed85c4908d864abb77ab1e6f94e0e4b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 12 Dec 2013 08:05:32 +0100 Subject: hwmon: (lm90) Unregister hwmon device if interrupt setup fails Commit 109b1283fb (hwmon: (lm90) Add support to handle IRQ) introduced interrupt support. Its error handling code fails to unregister the already registered hwmon device. Fixes: 109b1283fb532ac773a076748ffccf76a7067cab Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 4c4c142..8b8f3aa 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1610,12 +1610,14 @@ static int lm90_probe(struct i2c_client *client, "lm90", client); if (err < 0) { dev_err(dev, "cannot request IRQ %d\n", client->irq); - goto exit_remove_files; + goto exit_unregister; } } return 0; +exit_unregister: + hwmon_device_unregister(data->hwmon_dev); exit_remove_files: lm90_remove_files(client, data); exit_restore: -- cgit v0.10.2 From cf7559bc053471f32373d71d04a9aa19e0b48d59 Mon Sep 17 00:00:00 2001 From: Brian Carnes Date: Thu, 12 Dec 2013 08:05:32 +0100 Subject: hwmon: (w83l786ng) Fix fan speed control mode setting and reporting The wrong mask is used, which causes some fan speed control modes (pwmX_enable) to be incorrectly reported, and some modes to be impossible to set. [JD: add subject and description.] Signed-off-by: Brian Carnes Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index edb06cd..f190219 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -510,7 +510,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); data->pwm_enable[nr] = val; - reg &= ~(0x02 << W83L786NG_PWM_ENABLE_SHIFT[nr]); + reg &= ~(0x03 << W83L786NG_PWM_ENABLE_SHIFT[nr]); reg |= (val - 1) << W83L786NG_PWM_ENABLE_SHIFT[nr]; w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg); mutex_unlock(&data->update_lock); @@ -776,7 +776,7 @@ static struct w83l786ng_data *w83l786ng_update_device(struct device *dev) ((pwmcfg >> W83L786NG_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; data->pwm_enable[i] = - ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 2) + 1; + ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 3) + 1; data->pwm[i] = w83l786ng_read_value(client, W83L786NG_REG_PWM[i]); } -- cgit v0.10.2 From 33a7ab91d509fa33b4bcd3ce0038cc80298050da Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Dec 2013 08:05:32 +0100 Subject: hwmon: (w83l768ng) Fix fan speed control range The W83L786NG stores the fan speed on 4 bits while the sysfs interface uses a 0-255 range. Thus the driver should scale the user input down to map it to the device range, and scale up the value read from the device before presenting it to the user. The reserved register nibble should be left unchanged. Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org Reviewed-by: Guenter Roeck diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index f190219..6ed76ce 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -481,9 +481,11 @@ store_pwm(struct device *dev, struct device_attribute *attr, if (err) return err; val = clamp_val(val, 0, 255); + val = DIV_ROUND_CLOSEST(val, 0x11); mutex_lock(&data->update_lock); - data->pwm[nr] = val; + data->pwm[nr] = val * 0x11; + val |= w83l786ng_read_value(client, W83L786NG_REG_PWM[nr]) & 0xf0; w83l786ng_write_value(client, W83L786NG_REG_PWM[nr], val); mutex_unlock(&data->update_lock); return count; @@ -777,8 +779,9 @@ static struct w83l786ng_data *w83l786ng_update_device(struct device *dev) ? 0 : 1; data->pwm_enable[i] = ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 3) + 1; - data->pwm[i] = w83l786ng_read_value(client, - W83L786NG_REG_PWM[i]); + data->pwm[i] = + (w83l786ng_read_value(client, W83L786NG_REG_PWM[i]) + & 0x0f) * 0x11; } -- cgit v0.10.2 From 3806b45ba4655147a011df03242cc197ab986c43 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 Dec 2013 08:05:33 +0100 Subject: hwmon: Prevent some divide by zeros in FAN_TO_REG() The "rpm * div" operations can overflow here, so this patch adds an upper limit to rpm to prevent that. Jean Delvare helped me with this patch. Signed-off-by: Dan Carpenter Acked-by: Roger Lucas Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 6cf6bff..a2f3b4a 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -94,6 +94,8 @@ static inline u8 FAN_TO_REG(long rpm, int div) { if (rpm <= 0) return 255; + if (rpm > 1350000) + return 1; return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 1404e63..72a8897 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -141,6 +141,8 @@ static inline u8 FAN_TO_REG(long rpm, int div) { if (rpm <= 0) return 255; + if (rpm > 1350000) + return 1; return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 0e70178..aee14e2 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -145,7 +145,7 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 }; */ static inline u8 FAN_TO_REG(long rpm, int div) { - if (rpm == 0) + if (rpm <= 0 || rpm > 1310720) return 0; return clamp_val(1310720 / (rpm * div), 1, 255); } -- cgit v0.10.2 From a3adadf3018102c24754e0b53a5515c40fbaff4a Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Thu, 12 Dec 2013 08:51:59 +0100 Subject: netfilter: nft_reject: fix endianness in dump function The dump function in nft_reject_ipv4 was not converting a u32 field to network order before sending it to userspace, this needs to happen for consistency with other nf_tables and nfnetlink subsystems. Signed-off-by: Eric Leblond Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/nft_reject_ipv4.c b/net/ipv4/netfilter/nft_reject_ipv4.c index fff5ba1..4a5e94a 100644 --- a/net/ipv4/netfilter/nft_reject_ipv4.c +++ b/net/ipv4/netfilter/nft_reject_ipv4.c @@ -72,7 +72,7 @@ static int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr) { const struct nft_reject *priv = nft_expr_priv(expr); - if (nla_put_be32(skb, NFTA_REJECT_TYPE, priv->type)) + if (nla_put_be32(skb, NFTA_REJECT_TYPE, htonl(priv->type))) goto nla_put_failure; switch (priv->type) { -- cgit v0.10.2 From 8333f0fe133be420ce3fcddfd568c3a559ab274e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 2 Dec 2013 18:15:51 -0500 Subject: drm/radeon: Fix sideport problems on certain RS690 boards Some RS690 boards with 64MB of sideport memory show up as having 128MB sideport + 256MB of UMA. In this case, just skip the sideport memory and use UMA. This fixes rendering corruption and should improve performance. bug: https://bugs.freedesktop.org/show_bug.cgi?id=35457 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 1c56062..e7dab06 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -162,6 +162,16 @@ static void rs690_mc_init(struct radeon_device *rdev) base = RREG32_MC(R_000100_MCCFG_FB_LOCATION); base = G_000100_MC_FB_START(base) << 16; rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); + /* Some boards seem to be configured for 128MB of sideport memory, + * but really only have 64MB. Just skip the sideport and use + * UMA memory. + */ + if (rdev->mc.igp_sideport_enabled && + (rdev->mc.real_vram_size == (384 * 1024 * 1024))) { + base += 128 * 1024 * 1024; + rdev->mc.real_vram_size -= 128 * 1024 * 1024; + rdev->mc.mc_vram_size = rdev->mc.real_vram_size; + } /* Use K8 direct mapping for fast fb access. */ rdev->fastfb_working = false; -- cgit v0.10.2 From a7e252af5a819eb71c9494e62b2bfca982e92f84 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 22 Nov 2013 18:47:59 +0800 Subject: Btrfs: don't clear the default compression type We met a oops caused by the wrong compression type: [ 556.512356] BUG: unable to handle kernel NULL pointer dereference at (null) [ 556.512370] IP: [] __list_del_entry+0x1/0x98 [SNIP] [ 556.512490] [] ? list_del+0xd/0x2b [ 556.512539] [] find_workspace+0x97/0x175 [btrfs] [ 556.512546] [] ? _raw_spin_lock+0xe/0x10 [ 556.512576] [] btrfs_compress_pages+0x2d/0xa2 [btrfs] [ 556.512601] [] compress_file_range.constprop.54+0x1f2/0x4e8 [btrfs] [ 556.512627] [] async_cow_start+0x32/0x4d [btrfs] [ 556.512655] [] worker_loop+0x144/0x4c3 [btrfs] [ 556.512661] [] ? finish_task_switch+0x80/0xb8 [ 556.512689] [] ? btrfs_queue_worker+0x244/0x244 [btrfs] [ 556.512695] [] kthread+0x8d/0x95 [ 556.512699] [] ? bit_waitqueue+0x34/0x7d [ 556.512704] [] ? __kthread_parkme+0x65/0x65 [ 556.512709] [] ret_from_fork+0x7c/0xb0 [ 556.512713] [] ? __kthread_parkme+0x65/0x65 Steps to reproduce: # mkfs.btrfs -f # mount -o nodatacow # touch / # chattr =c / # dd if=/dev/zero of=/ bs=1M count=10 It is because we cleared the default compression type when setting the nodatacow. In fact, we needn't do it because we have used COMPRESS flag to indicate if we need compressed the file data or not, needn't use the variant -- compress_type -- in btrfs_info to do the same thing, and just use it to hold the default compression type. Or we would get a wrong compress type for a file whose own compress flag is set but the compress flag of its filesystem is not set. Reported-by: Tsutomu Itoh Signed-off-by: Miao Xie Reviewed-by: Liu Bo Signed-off-by: Chris Mason diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 2d8ac1b..d71a11d 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -432,7 +432,6 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) } else { printk(KERN_INFO "btrfs: setting nodatacow\n"); } - info->compress_type = BTRFS_COMPRESS_NONE; btrfs_clear_opt(info->mount_opt, COMPRESS); btrfs_clear_opt(info->mount_opt, FORCE_COMPRESS); btrfs_set_opt(info->mount_opt, NODATACOW); @@ -461,7 +460,6 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) btrfs_set_fs_incompat(info, COMPRESS_LZO); } else if (strncmp(args[0].from, "no", 2) == 0) { compress_type = "no"; - info->compress_type = BTRFS_COMPRESS_NONE; btrfs_clear_opt(info->mount_opt, COMPRESS); btrfs_clear_opt(info->mount_opt, FORCE_COMPRESS); compress_force = false; @@ -474,9 +472,10 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) btrfs_set_opt(info->mount_opt, FORCE_COMPRESS); pr_info("btrfs: force %s compression\n", compress_type); - } else + } else if (btrfs_test_opt(root, COMPRESS)) { pr_info("btrfs: use %s compression\n", compress_type); + } break; case Opt_ssd: printk(KERN_INFO "btrfs: use ssd allocation scheme\n"); -- cgit v0.10.2 From e43f998e47bae27e37e159915625e8d4b130153b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Dec 2013 17:51:32 +0100 Subject: btrfs: call mnt_drop_write after interrupted subvol deletion If btrfs_ioctl_snap_destroy blocks on the mutex and the process is killed, mnt_write count is unbalanced and leads to unmountable filesystem. CC: stable@vger.kernel.org Signed-off-by: David Sterba Signed-off-by: Chris Mason diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a1116225..21da576 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2121,7 +2121,7 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file, err = mutex_lock_killable_nested(&dir->i_mutex, I_MUTEX_PARENT); if (err == -EINTR) - goto out; + goto out_drop_write; dentry = lookup_one_len(vol_args->name, parent, namelen); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); @@ -2284,6 +2284,7 @@ out_dput: dput(dentry); out_unlock_dir: mutex_unlock(&dir->i_mutex); +out_drop_write: mnt_drop_write_file(file); out: kfree(vol_args); -- cgit v0.10.2 From 639eefc8afd1b8b839b1fd5605378d869d3612a1 Mon Sep 17 00:00:00 2001 From: Filipe David Borba Manana Date: Sun, 8 Dec 2013 00:26:29 +0000 Subject: Btrfs: don't miss skinny extent items on delayed ref head contention Currently extent-tree.c:btrfs_lookup_extent_info() can miss the lookup of skinny extent items. This can happen when the execution flow is the following: * We do an extent tree lookup and fail to find a skinny extent item; * As a result, we attempt to see if a non-skinny extent item exists, either by looking at previous item in the leaf or by doing another full extent tree search; * We have a transaction and then we check for a matching delayed ref head in the transaction's delayed refs rbtree; * We find such delayed ref head and then we try to lock it with a call to mutex_trylock(); * The lock was contended so we jump to the label "again", which repeats the extent tree search but for a non-skinny extent item, because we set previously metadata variable to 0 and the search key to look for a non-skinny extent-item; * After the jump (and after releasing the transaction's delayed refs lock), a skinny extent item might have been added to the extent tree but we will miss it because metadata is set to 0 and the search key is set for a non-skinny extent-item. The fix here is to not reset metadata to 0 and to jump to the initial search key setup if the delayed ref head is contended, instead of jumping directly to the extent tree search label ("again"). This issue was found while investigating the issue reported at Bugzilla 64961. David Sterba suspected this function was missing extent items, and that this could be caused by the last change to this function, which was made in the following patch: [PATCH] Btrfs: optimize btrfs_lookup_extent_info() (commit 74be9510876a66ad9826613ac8a526d26f9e7f01) But in fact this issue already existed before, because after failing to find a skinny extent item, the code set the search key for a non-skinny extent item, and on contention of a matching delayed ref head it would not search the extent tree for a skinny extent item anymore. Signed-off-by: Filipe David Borba Manana Reviewed-by: Liu Bo Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 45d98d0..9c01509 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -767,20 +767,19 @@ int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans, if (!path) return -ENOMEM; - if (metadata) { - key.objectid = bytenr; - key.type = BTRFS_METADATA_ITEM_KEY; - key.offset = offset; - } else { - key.objectid = bytenr; - key.type = BTRFS_EXTENT_ITEM_KEY; - key.offset = offset; - } - if (!trans) { path->skip_locking = 1; path->search_commit_root = 1; } + +search_again: + key.objectid = bytenr; + key.offset = offset; + if (metadata) + key.type = BTRFS_METADATA_ITEM_KEY; + else + key.type = BTRFS_EXTENT_ITEM_KEY; + again: ret = btrfs_search_slot(trans, root->fs_info->extent_root, &key, path, 0, 0); @@ -788,7 +787,6 @@ again: goto out_free; if (ret > 0 && metadata && key.type == BTRFS_METADATA_ITEM_KEY) { - metadata = 0; if (path->slots[0]) { path->slots[0]--; btrfs_item_key_to_cpu(path->nodes[0], &key, @@ -855,7 +853,7 @@ again: mutex_lock(&head->mutex); mutex_unlock(&head->mutex); btrfs_put_delayed_ref(&head->node); - goto again; + goto search_again; } if (head->extent_op && head->extent_op->update_flags) extent_flags |= head->extent_op->flags_to_set; -- cgit v0.10.2 From c974c4642fee8c58239c7753d0bf548b23799923 Mon Sep 17 00:00:00 2001 From: Wang Shilong Date: Wed, 11 Dec 2013 19:29:51 +0800 Subject: Btrfs: fix an oops when doing balance relocation I hit an oops when inserting reloc root into @reloc_root_tree(it can be easily triggered when forcing cow for relocation root) [ 866.494539] [] btrfs_init_reloc_root+0x79/0xb0 [btrfs] [ 866.495321] [] record_root_in_trans+0xb0/0x110 [btrfs] [ 866.496109] [] btrfs_record_root_in_trans+0x48/0x80 [btrfs] [ 866.496908] [] select_reloc_root+0xa8/0x210 [btrfs] [ 866.497703] [] do_relocation+0x16a/0x540 [btrfs] This is because reloc root inserted into @reloc_root_tree is not within one transaction,reloc root may be cowed and root block bytenr will be reused then oops happens.We should update reloc root in @reloc_root_tree when cow reloc root node, fix it. Signed-off-by: Wang Shilong Reviewed-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index ce459a7..7cdc760 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1264,10 +1264,10 @@ static int __must_check __add_reloc_root(struct btrfs_root *root) } /* - * helper to update/delete the 'address of tree root -> reloc tree' + * helper to delete the 'address of tree root -> reloc tree' * mapping */ -static int __update_reloc_root(struct btrfs_root *root, int del) +static void __del_reloc_root(struct btrfs_root *root) { struct rb_node *rb_node; struct mapping_node *node = NULL; @@ -1275,7 +1275,7 @@ static int __update_reloc_root(struct btrfs_root *root, int del) spin_lock(&rc->reloc_root_tree.lock); rb_node = tree_search(&rc->reloc_root_tree.rb_root, - root->commit_root->start); + root->node->start); if (rb_node) { node = rb_entry(rb_node, struct mapping_node, rb_node); rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root); @@ -1283,23 +1283,45 @@ static int __update_reloc_root(struct btrfs_root *root, int del) spin_unlock(&rc->reloc_root_tree.lock); if (!node) - return 0; + return; BUG_ON((struct btrfs_root *)node->data != root); - if (!del) { - spin_lock(&rc->reloc_root_tree.lock); - node->bytenr = root->node->start; - rb_node = tree_insert(&rc->reloc_root_tree.rb_root, - node->bytenr, &node->rb_node); - spin_unlock(&rc->reloc_root_tree.lock); - if (rb_node) - backref_tree_panic(rb_node, -EEXIST, node->bytenr); - } else { - spin_lock(&root->fs_info->trans_lock); - list_del_init(&root->root_list); - spin_unlock(&root->fs_info->trans_lock); - kfree(node); + spin_lock(&root->fs_info->trans_lock); + list_del_init(&root->root_list); + spin_unlock(&root->fs_info->trans_lock); + kfree(node); +} + +/* + * helper to update the 'address of tree root -> reloc tree' + * mapping + */ +static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr) +{ + struct rb_node *rb_node; + struct mapping_node *node = NULL; + struct reloc_control *rc = root->fs_info->reloc_ctl; + + spin_lock(&rc->reloc_root_tree.lock); + rb_node = tree_search(&rc->reloc_root_tree.rb_root, + root->node->start); + if (rb_node) { + node = rb_entry(rb_node, struct mapping_node, rb_node); + rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root); } + spin_unlock(&rc->reloc_root_tree.lock); + + if (!node) + return 0; + BUG_ON((struct btrfs_root *)node->data != root); + + spin_lock(&rc->reloc_root_tree.lock); + node->bytenr = new_bytenr; + rb_node = tree_insert(&rc->reloc_root_tree.rb_root, + node->bytenr, &node->rb_node); + spin_unlock(&rc->reloc_root_tree.lock); + if (rb_node) + backref_tree_panic(rb_node, -EEXIST, node->bytenr); return 0; } @@ -1420,7 +1442,6 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans, { struct btrfs_root *reloc_root; struct btrfs_root_item *root_item; - int del = 0; int ret; if (!root->reloc_root) @@ -1432,11 +1453,9 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans, if (root->fs_info->reloc_ctl->merge_reloc_tree && btrfs_root_refs(root_item) == 0) { root->reloc_root = NULL; - del = 1; + __del_reloc_root(reloc_root); } - __update_reloc_root(reloc_root, del); - if (reloc_root->commit_root != reloc_root->node) { btrfs_set_root_node(root_item, reloc_root->node); free_extent_buffer(reloc_root->commit_root); @@ -2287,7 +2306,7 @@ void free_reloc_roots(struct list_head *list) while (!list_empty(list)) { reloc_root = list_entry(list->next, struct btrfs_root, root_list); - __update_reloc_root(reloc_root, 1); + __del_reloc_root(reloc_root); free_extent_buffer(reloc_root->node); free_extent_buffer(reloc_root->commit_root); kfree(reloc_root); @@ -2332,7 +2351,7 @@ again: ret = merge_reloc_root(rc, root); if (ret) { - __update_reloc_root(reloc_root, 1); + __del_reloc_root(reloc_root); free_extent_buffer(reloc_root->node); free_extent_buffer(reloc_root->commit_root); kfree(reloc_root); @@ -4522,6 +4541,11 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans, BUG_ON(rc->stage == UPDATE_DATA_PTRS && root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID); + if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) { + if (buf == root->node) + __update_reloc_root(root, cow->start); + } + level = btrfs_header_level(buf); if (btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item)) -- cgit v0.10.2 From 6646374863508e24da7c7d21527f8dadc8687ff9 Mon Sep 17 00:00:00 2001 From: Wang Shilong Date: Tue, 10 Dec 2013 00:14:34 +0800 Subject: Btrfs: skip building backref tree for uuid and quota tree when doing balance relocation Quota tree and UUID Tree is only cowed, they can not be snapshoted. Signed-off-by: Wang Shilong Signed-off-by: Chris Mason diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 7cdc760..0a3f0256 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -571,7 +571,9 @@ static int is_cowonly_root(u64 root_objectid) root_objectid == BTRFS_CHUNK_TREE_OBJECTID || root_objectid == BTRFS_DEV_TREE_OBJECTID || root_objectid == BTRFS_TREE_LOG_OBJECTID || - root_objectid == BTRFS_CSUM_TREE_OBJECTID) + root_objectid == BTRFS_CSUM_TREE_OBJECTID || + root_objectid == BTRFS_UUID_TREE_OBJECTID || + root_objectid == BTRFS_QUOTA_TREE_OBJECTID) return 1; return 0; } -- cgit v0.10.2 From 467bb1d27c0b783b73e6349304c0d90b5b4f431b Mon Sep 17 00:00:00 2001 From: Wang Shilong Date: Wed, 11 Dec 2013 19:29:52 +0800 Subject: Btrfs: make sure we cleanup all reloc roots if error happens I hit an oops when merging reloc roots fails, the reason is that new reloc roots may be added and we should make sure we cleanup all reloc roots. Signed-off-by: Wang Shilong Signed-off-by: Chris Mason diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 0a3f0256..429c73c 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2409,6 +2409,13 @@ out: btrfs_std_error(root->fs_info, ret); if (!list_empty(&reloc_roots)) free_reloc_roots(&reloc_roots); + + /* new reloc root may be added */ + mutex_lock(&root->fs_info->reloc_mutex); + list_splice_init(&rc->reloc_roots, &reloc_roots); + mutex_unlock(&root->fs_info->reloc_mutex); + if (!list_empty(&reloc_roots)) + free_reloc_roots(&reloc_roots); } BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root)); -- cgit v0.10.2 From 700ff4f095d78af0998953e922e041d75254518b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 10 Jan 2013 03:57:25 -0500 Subject: Btrfs: fix access_ok() check in btrfs_ioctl_send() The closing parenthesis is in the wrong place. We want to check "sizeof(*arg->clone_sources) * arg->clone_sources_count" instead of "sizeof(*arg->clone_sources * arg->clone_sources_count)". Signed-off-by: Dan Carpenter Reviewed-by: Jie Liu Signed-off-by: Chris Mason cc: stable@vger.kernel.org diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 6837fe8..945d1db 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -4723,8 +4723,8 @@ long btrfs_ioctl_send(struct file *mnt_file, void __user *arg_) } if (!access_ok(VERIFY_READ, arg->clone_sources, - sizeof(*arg->clone_sources * - arg->clone_sources_count))) { + sizeof(*arg->clone_sources) * + arg->clone_sources_count)) { ret = -EFAULT; goto out; } -- cgit v0.10.2 From 1522f9c79cd29c8f55120777ddc8ba63b9216509 Mon Sep 17 00:00:00 2001 From: Martin Andersson Date: Sat, 7 Dec 2013 23:22:10 +0100 Subject: drm/radeon/dpm: Fix hwmon crash Commit ec39f64bba3421c2060fcbd1aeb6eec81fe0a42d (drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups) converted one usage of dev_get_drvdata, but there were two more. bug: https://bugs.freedesktop.org/show_bug.cgi?id=72457 Signed-off-by: Martin Andersson Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index dc75bb6..984097b 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -552,8 +552,7 @@ static ssize_t radeon_hwmon_show_temp_thresh(struct device *dev, struct device_attribute *attr, char *buf) { - struct drm_device *ddev = dev_get_drvdata(dev); - struct radeon_device *rdev = ddev->dev_private; + struct radeon_device *rdev = dev_get_drvdata(dev); int hyst = to_sensor_dev_attr(attr)->index; int temp; @@ -580,8 +579,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = container_of(kobj, struct device, kobj); - struct drm_device *ddev = dev_get_drvdata(dev); - struct radeon_device *rdev = ddev->dev_private; + struct radeon_device *rdev = dev_get_drvdata(dev); /* Skip limit attributes if DPM is not enabled */ if (rdev->pm.pm_method != PM_METHOD_DPM && -- cgit v0.10.2 From 7819678faec569f90c243d877c6f948dfb03f3a9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 9 Dec 2013 17:38:51 -0500 Subject: drm/radeon/cik: plug in missing blit callback I implemented support for this, but forget to hook up the callback so the driver can actually use it. On asics with a dedicated DMA engine, we use the DMA engine for buffer migration so this is just for testing purposes. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index e354ce9..c0425bb 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -2021,7 +2021,7 @@ static struct radeon_asic ci_asic = { .hdmi_setmode = &evergreen_hdmi_setmode, }, .copy = { - .blit = NULL, + .blit = &cik_copy_cpdma, .blit_ring_index = RADEON_RING_TYPE_GFX_INDEX, .dma = &cik_copy_dma, .dma_ring_index = R600_RING_TYPE_DMA_INDEX, @@ -2122,7 +2122,7 @@ static struct radeon_asic kv_asic = { .hdmi_setmode = &evergreen_hdmi_setmode, }, .copy = { - .blit = NULL, + .blit = &cik_copy_cpdma, .blit_ring_index = RADEON_RING_TYPE_GFX_INDEX, .dma = &cik_copy_dma, .dma_ring_index = R600_RING_TYPE_DMA_INDEX, -- cgit v0.10.2 From 1b3abef830db98c11d7f916a483abaf2501f3323 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 10 Dec 2013 17:57:37 +0100 Subject: drm/radeon: fix typo in cik_copy_dma MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we end up with a rather strange looking result. Signed-off-by: Christian König Tested-by: Tom Stellard Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c index 0300727..d08b83c 100644 --- a/drivers/gpu/drm/radeon/cik_sdma.c +++ b/drivers/gpu/drm/radeon/cik_sdma.c @@ -458,7 +458,7 @@ int cik_copy_dma(struct radeon_device *rdev, radeon_ring_write(ring, 0); /* src/dst endian swap */ radeon_ring_write(ring, src_offset & 0xffffffff); radeon_ring_write(ring, upper_32_bits(src_offset) & 0xffffffff); - radeon_ring_write(ring, dst_offset & 0xfffffffc); + radeon_ring_write(ring, dst_offset & 0xffffffff); radeon_ring_write(ring, upper_32_bits(dst_offset) & 0xffffffff); src_offset += cur_size_in_bytes; dst_offset += cur_size_in_bytes; -- cgit v0.10.2 From 227ae10f17a5f2fd1307b7e582b603ef7bbb7e97 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 11 Dec 2013 11:43:58 -0500 Subject: drm/radeon: add missing display tiling setup for oland Fixes improperly set up display params for 2D tiling on oland. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 80a2012..b197059 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1196,7 +1196,9 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, } else if ((rdev->family == CHIP_TAHITI) || (rdev->family == CHIP_PITCAIRN)) fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16); - else if (rdev->family == CHIP_VERDE) + else if ((rdev->family == CHIP_VERDE) || + (rdev->family == CHIP_OLAND) || + (rdev->family == CHIP_HAINAN)) /* for completeness. HAINAN has no display hw */ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16); switch (radeon_crtc->crtc_id) { -- cgit v0.10.2 From 59aebe2b32466f7ed5b79f18646be6dddc926a6d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 12 Dec 2013 09:05:06 -0500 Subject: Revert "drm/radeon: Implement radeon_pci_shutdown" This causes a race condition between drm_dev_unregister() and pci_driver.shutdown at shutdown or driver unload time. We need to revisit how to properly support kexec within the drm. This reverts commit 846ae41ae99d314bf2a02784152208a6ddf7eddc. diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 9f5ff28..1958b36a 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -508,15 +508,6 @@ static const struct file_operations radeon_driver_kms_fops = { #endif }; - -static void -radeon_pci_shutdown(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - - radeon_driver_unload_kms(dev); -} - static struct drm_driver kms_driver = { .driver_features = DRIVER_USE_AGP | @@ -586,7 +577,6 @@ static struct pci_driver radeon_kms_pci_driver = { .probe = radeon_pci_probe, .remove = radeon_pci_remove, .driver.pm = &radeon_pm_ops, - .shutdown = radeon_pci_shutdown, }; static int __init radeon_init(void) -- cgit v0.10.2 From f12d5bfceb7e1f9051563381ec047f7f13956c3c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Dec 2013 09:38:42 -0800 Subject: futex: fix handling of read-only-mapped hugepages The hugepage code had the exact same bug that regular pages had in commit 7485d0d3758e ("futexes: Remove rw parameter from get_futex_key()"). The regular page case was fixed by commit 9ea71503a8ed ("futex: Fix regression with read only mappings"), but the transparent hugepage case (added in a5b338f2b0b1: "thp: update futex compound knowledge") case remained broken. Found by Dave Jones and his trinity tool. Reported-and-tested-by: Dave Jones Cc: stable@kernel.org # v2.6.38+ Acked-by: Thomas Gleixner Cc: Mel Gorman Cc: Darren Hart Cc: Andrea Arcangeli Cc: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/futex.c b/kernel/futex.c index 80ba086..02febad 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -288,7 +288,7 @@ again: put_page(page); /* serialize against __split_huge_page_splitting() */ local_irq_disable(); - if (likely(__get_user_pages_fast(address, 1, 1, &page) == 1)) { + if (likely(__get_user_pages_fast(address, 1, !ro, &page) == 1)) { page_head = compound_head(page); /* * page_head is valid pointer but we must pin -- cgit v0.10.2 From 5cdec2d833748fbd27d3682f7209225c504c79c5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Dec 2013 09:53:51 -0800 Subject: futex: move user address verification up to common code When debugging the read-only hugepage case, I was confused by the fact that get_futex_key() did an access_ok() only for the non-shared futex case, since the user address checking really isn't in any way specific to the private key handling. Now, it turns out that the shared key handling does effectively do the equivalent checks inside get_user_pages_fast() (it doesn't actually check the address range on x86, but does check the page protections for being a user page). So it wasn't actually a bug, but the fact that we treat the address differently for private and shared futexes threw me for a loop. Just move the check up, so that it gets done for both cases. Also, use the 'rw' parameter for the type, even if it doesn't actually matter any more (it's a historical artifact of the old racy i386 "page faults from kernel space don't check write protections"). Cc: Thomas Gleixner Signed-off-by: Linus Torvalds diff --git a/kernel/futex.c b/kernel/futex.c index 02febad..f6ff019 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -251,6 +251,9 @@ get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) return -EINVAL; address -= key->both.offset; + if (unlikely(!access_ok(rw, uaddr, sizeof(u32)))) + return -EFAULT; + /* * PROCESS_PRIVATE futexes are fast. * As the mm cannot disappear under us and the 'key' only needs @@ -259,8 +262,6 @@ get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) * but access_ok() should be faster than find_vma() */ if (!fshared) { - if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))) - return -EFAULT; key->private.mm = mm; key->private.address = address; get_futex_key_refs(key); -- cgit v0.10.2 From 10574059ce0451c6572c85329c772aa15085f8eb Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Wed, 11 Dec 2013 10:57:15 +0000 Subject: xen-netback: napi: fix abuse of budget netback seems to be somewhat confused about the napi budget parameter. The parameter is supposed to limit the number of skbs processed in each poll, but netback has this confused with grant operations. This patch fixes that, properly limiting the work done in each poll. Note that this limit makes sure we do not process any more data from the shared ring than we intend to pass back from the poll. This is important to prevent tx_queue potentially growing without bound. Signed-off-by: Paul Durrant Cc: Wei Liu Cc: Ian Campbell Cc: David Vrabel Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index d158fc4..db79e29 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1445,14 +1445,15 @@ static bool tx_credit_exceeded(struct xenvif *vif, unsigned size) return false; } -static unsigned xenvif_tx_build_gops(struct xenvif *vif) +static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget) { struct gnttab_copy *gop = vif->tx_copy_ops, *request_gop; struct sk_buff *skb; int ret; while ((nr_pending_reqs(vif) + XEN_NETBK_LEGACY_SLOTS_MAX - < MAX_PENDING_REQS)) { + < MAX_PENDING_REQS) && + (skb_queue_len(&vif->tx_queue) < budget)) { struct xen_netif_tx_request txreq; struct xen_netif_tx_request txfrags[XEN_NETBK_LEGACY_SLOTS_MAX]; struct page *page; @@ -1614,14 +1615,13 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif) } -static int xenvif_tx_submit(struct xenvif *vif, int budget) +static int xenvif_tx_submit(struct xenvif *vif) { struct gnttab_copy *gop = vif->tx_copy_ops; struct sk_buff *skb; int work_done = 0; - while (work_done < budget && - (skb = __skb_dequeue(&vif->tx_queue)) != NULL) { + while ((skb = __skb_dequeue(&vif->tx_queue)) != NULL) { struct xen_netif_tx_request *txp; u16 pending_idx; unsigned data_len; @@ -1696,14 +1696,14 @@ int xenvif_tx_action(struct xenvif *vif, int budget) if (unlikely(!tx_work_todo(vif))) return 0; - nr_gops = xenvif_tx_build_gops(vif); + nr_gops = xenvif_tx_build_gops(vif, budget); if (nr_gops == 0) return 0; gnttab_batch_copy(vif->tx_copy_ops, nr_gops); - work_done = xenvif_tx_submit(vif, nr_gops); + work_done = xenvif_tx_submit(vif); return work_done; } -- cgit v0.10.2 From d9601a36ffdb5c142697bef1228afb5ba4ee4003 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Wed, 11 Dec 2013 10:57:16 +0000 Subject: xen-netback: napi: don't prematurely request a tx event This patch changes the RING_FINAL_CHECK_FOR_REQUESTS in xenvif_build_tx_gops to a check for RING_HAS_UNCONSUMED_REQUESTS as the former call has the side effect of advancing the ring event pointer and therefore inviting another interrupt from the frontend before the napi poll has actually finished, thereby defeating the point of napi. The event pointer is updated by RING_FINAL_CHECK_FOR_REQUESTS in xenvif_poll, the napi poll function, if the work done is less than the budget i.e. when actually transitioning back to interrupt mode. Reported-by: Malcolm Crossley Signed-off-by: Paul Durrant Cc: Wei Liu Cc: Ian Campbell Cc: David Vrabel Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index db79e29..33b8aa6 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1475,7 +1475,7 @@ static unsigned xenvif_tx_build_gops(struct xenvif *vif, int budget) continue; } - RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, work_to_do); + work_to_do = RING_HAS_UNCONSUMED_REQUESTS(&vif->tx); if (!work_to_do) break; -- cgit v0.10.2 From a5c21dcefa1c3d759457a604b3cfc4af29c8713f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Dec 2013 17:40:21 +0000 Subject: dcache: allow word-at-a-time name hashing with big-endian CPUs When explicitly hashing the end of a string with the word-at-a-time interface, we have to be careful which end of the word we pick up. On big-endian CPUs, the upper-bits will contain the data we're after, so ensure we generate our masks accordingly (and avoid hashing whatever random junk may have been sitting after the string). This patch adds a new dcache helper, bytemask_from_count, which creates a mask appropriate for the CPU endianness. Cc: Al Viro Signed-off-by: Will Deacon Signed-off-by: Linus Torvalds diff --git a/fs/dcache.c b/fs/dcache.c index 4bdb300..6055d61 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -192,7 +192,7 @@ static inline int dentry_string_cmp(const unsigned char *cs, const unsigned char if (!tcount) return 0; } - mask = ~(~0ul << tcount*8); + mask = bytemask_from_count(tcount); return unlikely(!!((a ^ b) & mask)); } diff --git a/fs/namei.c b/fs/namei.c index c53d3a9..3531dee 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1598,11 +1598,6 @@ static inline int nested_symlink(struct path *path, struct nameidata *nd) * do a "get_unaligned()" if this helps and is sufficiently * fast. * - * - Little-endian machines (so that we can generate the mask - * of low bytes efficiently). Again, we *could* do a byte - * swapping load on big-endian architectures if that is not - * expensive enough to make the optimization worthless. - * * - non-CONFIG_DEBUG_PAGEALLOC configurations (so that we * do not trap on the (extremely unlikely) case of a page * crossing operation. @@ -1646,7 +1641,7 @@ unsigned int full_name_hash(const unsigned char *name, unsigned int len) if (!len) goto done; } - mask = ~(~0ul << len*8); + mask = bytemask_from_count(len); hash += mask & a; done: return fold_hash(hash); diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 57e87e7..bf72e9a 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -29,8 +29,10 @@ struct vfsmount; /* The hash is always the low bits of hash_len */ #ifdef __LITTLE_ENDIAN #define HASH_LEN_DECLARE u32 hash; u32 len; + #define bytemask_from_count(cnt) (~(~0ul << (cnt)*8)) #else #define HASH_LEN_DECLARE u32 len; u32 hash; + #define bytemask_from_count(cnt) (~(~0ul >> (cnt)*8)) #endif /* -- cgit v0.10.2 From 11ec50caedb56e3a87715edeff6a1852e6ae5416 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Dec 2013 17:40:22 +0000 Subject: word-at-a-time: provide generic big-endian zero_bytemask implementation Whilst architectures may be able to do better than this (which they can, by simply defining their own macro), this is a generic stab at a zero_bytemask implementation for the asm-generic, big-endian word-at-a-time implementation. On arm64, a clz instruction is used to implement the fls efficiently. Signed-off-by: Will Deacon Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/word-at-a-time.h b/include/asm-generic/word-at-a-time.h index 3f21f1b..d3909ef 100644 --- a/include/asm-generic/word-at-a-time.h +++ b/include/asm-generic/word-at-a-time.h @@ -49,4 +49,12 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct return (val + c->high_bits) & ~rhs; } +#ifndef zero_bytemask +#ifdef CONFIG_64BIT +#define zero_bytemask(mask) (~0ul << fls64(mask)) +#else +#define zero_bytemask(mask) (~0ul << fls(mask)) +#endif /* CONFIG_64BIT */ +#endif /* zero_bytemask */ + #endif /* _ASM_WORD_AT_A_TIME_H */ -- cgit v0.10.2 From f280e89ad6a29d9969cb6b216123c798e1689bc4 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 11 Dec 2013 22:09:05 -0600 Subject: drivers: net: cpsw: fix for cpsw crash when build as modules When CPSW and Davinci MDIO are build as modules, CPSW crashes when accessing CPSW registers in CPSW probe. The same is working in built-in as the CPSW clocks are enabled in Davindi MDIO probe, SO Enabling the clocks before accessing the version register and moving out the other register access to cpsw device open. Signed-off-by: Mugunthan V N Signed-off-by: Felipe Balbi Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index a91f0c9..5120d9c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1151,6 +1151,12 @@ static int cpsw_ndo_open(struct net_device *ndev) * receive descs */ cpsw_info(priv, ifup, "submitted %d rx descriptors\n", i); + + if (cpts_register(&priv->pdev->dev, priv->cpts, + priv->data.cpts_clock_mult, + priv->data.cpts_clock_shift)) + dev_err(priv->dev, "error registering cpts device\n"); + } /* Enable Interrupt pacing if configured */ @@ -1197,6 +1203,7 @@ static int cpsw_ndo_stop(struct net_device *ndev) netif_carrier_off(priv->ndev); if (cpsw_common_res_usage_state(priv) <= 1) { + cpts_unregister(priv->cpts); cpsw_intr_disable(priv); cpdma_ctlr_int_ctrl(priv->dma, false); cpdma_ctlr_stop(priv->dma); @@ -1985,9 +1992,15 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_runtime_disable_ret; } priv->regs = ss_regs; - priv->version = __raw_readl(&priv->regs->id_ver); priv->host_port = HOST_PORT_NUM; + /* Need to enable clocks with runtime PM api to access module + * registers + */ + pm_runtime_get_sync(&pdev->dev); + priv->version = readl(&priv->regs->id_ver); + pm_runtime_put_sync(&pdev->dev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); priv->wr_regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->wr_regs)) { @@ -2157,8 +2170,6 @@ static int cpsw_remove(struct platform_device *pdev) unregister_netdev(cpsw_get_slave_ndev(priv, 1)); unregister_netdev(ndev); - cpts_unregister(priv->cpts); - cpsw_ale_destroy(priv->ale); cpdma_chan_destroy(priv->txch); cpdma_chan_destroy(priv->rxch); -- cgit v0.10.2 From 4cc629b7a20945ce35628179180329b6bc9e552b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 10 Dec 2013 15:19:03 -0800 Subject: gpio: msm: Fix irq mask/unmask by writing bits instead of numbers We should be writing bits here but instead we're writing the numbers that correspond to the bits we want to write. Fix it by wrapping the numbers in the BIT() macro. This fixes gpios acting as interrupts. Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c index 7b37300..2baf0dd 100644 --- a/drivers/gpio/gpio-msm-v2.c +++ b/drivers/gpio/gpio-msm-v2.c @@ -252,7 +252,7 @@ static void msm_gpio_irq_mask(struct irq_data *d) spin_lock_irqsave(&tlmm_lock, irq_flags); writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio)); - clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); + clear_gpio_bits(BIT(INTR_RAW_STATUS_EN) | BIT(INTR_ENABLE), GPIO_INTR_CFG(gpio)); __clear_bit(gpio, msm_gpio.enabled_irqs); spin_unlock_irqrestore(&tlmm_lock, irq_flags); } @@ -264,7 +264,7 @@ static void msm_gpio_irq_unmask(struct irq_data *d) spin_lock_irqsave(&tlmm_lock, irq_flags); __set_bit(gpio, msm_gpio.enabled_irqs); - set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); + set_gpio_bits(BIT(INTR_RAW_STATUS_EN) | BIT(INTR_ENABLE), GPIO_INTR_CFG(gpio)); writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio)); spin_unlock_irqrestore(&tlmm_lock, irq_flags); } -- cgit v0.10.2 From 8808b64daac68a2c85366c767a3ef850824ede74 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Fri, 29 Nov 2013 22:04:09 +0400 Subject: gpio: rcar: Fix level interrupt handling According to the manual, if a port is set for level detection using the corresponding bit in the edge/level select register and an external level interrupt signal is asserted, the corresponding bit in INTDT does not use the FF to hold the input. Thus, writing 1 to the corresponding bits in INTCLR cannot clear the corresponding bits in the INTDT register. Instead, when an external input signal is stopped, the corresponding bit in INTDT is cleared automatically. Since the INTDT bit cannot be cleared for the level interrupts until the interrupt signal is stopped, we end up with the infinite loop when using deferred (threaded) IRQ handling. Since a deferred interrupt is disabled by the low-level handler and re-enabled only when the deferred handler is completed, Fix the issue by dropping disabled interrupts from the pending mask as suggested by Laurent Pinchart Changes in V2: * Drop disabled interrupts from pending mask altogether instead of dropping level interrupts one by one once they get handled. Signed-off-by: Valentine Barshak Acked-by: Laurent Pinchart Acked-by: Magnus Damm Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index fe088a3..8b7e719 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -169,7 +169,8 @@ static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) u32 pending; unsigned int offset, irqs_handled = 0; - while ((pending = gpio_rcar_read(p, INTDT))) { + while ((pending = gpio_rcar_read(p, INTDT) & + gpio_rcar_read(p, INTMSK))) { offset = __ffs(pending); gpio_rcar_write(p, INTCLR, BIT(offset)); generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); -- cgit v0.10.2 From a0a9663dd2146d54339237764e1bfc60e8a39328 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 12 Dec 2013 10:15:59 +0100 Subject: net: make neigh_priv_len in struct net_device 16bit instead of 8bit neigh_priv_len is defined as u8. With all debug enabled struct ipoib_neigh has 200 bytes. The largest part is sk_buff_head with 96 bytes and here the spinlock with 72 bytes. The size value still fits in this u8 leaving some room for more. On -RT struct ipoib_neigh put on weight and has 392 bytes. The main reason is sk_buff_head with 288 and the fatty here is spinlock with 192 bytes. This does no longer fit into into neigh_priv_len and gcc complains. This patch changes neigh_priv_len from being 8bit to 16bit. Since the following element (dev_id) is 16bit followed by a spinlock which is aligned, the struct remains with a total size of 3200 (allmodconfig) / 2048 (with as much debug off as possible) bytes on x86-64. On x86-32 the struct is 1856 (allmodconfig) / 1216 (with as much debug off as possible) bytes long. The numbers were gained with and without the patch to prove that this change does not increase the size of the struct. Cc: Steven Rostedt Cc: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 7f0ed42..d9a550b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1255,7 +1255,7 @@ struct net_device { unsigned char perm_addr[MAX_ADDR_LEN]; /* permanent hw address */ unsigned char addr_assign_type; /* hw address assignment type */ unsigned char addr_len; /* hardware address length */ - unsigned char neigh_priv_len; + unsigned short neigh_priv_len; unsigned short dev_id; /* Used to differentiate devices * that share the same link * layer address -- cgit v0.10.2 From a3314f3d40215349ab2427800c1e10676691389f Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Thu, 12 Dec 2013 14:20:13 +0000 Subject: xen-netback: fix gso_prefix check There is a mistake in checking the gso_prefix mask when passing large packets to a guest. The wrong shift is applied to the bit - the raw skb gso type is used rather then the translated one. This leads to large packets being handed to the guest without the GSO metadata. This patch fixes the check. The mistake manifested as errors whilst running Microsoft HCK large packet offload tests between a pair of Windows 8 VMs. I have verified this patch fixes those errors. Signed-off-by: Paul Durrant Cc: Wei Liu Cc: Ian Campbell Cc: David Vrabel Acked-by: Ian Campbell Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 33b8aa6..e884ee1 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -452,7 +452,7 @@ static int xenvif_gop_skb(struct sk_buff *skb, } /* Set up a GSO prefix descriptor, if necessary */ - if ((1 << skb_shinfo(skb)->gso_type) & vif->gso_prefix_mask) { + if ((1 << gso_type) & vif->gso_prefix_mask) { req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++); meta = npo->meta + npo->meta_prod++; meta->gso_type = gso_type; -- cgit v0.10.2 From 2212a8529eb06c559256f0cee41c1f14890d54d3 Mon Sep 17 00:00:00 2001 From: Elie De Brauwer Date: Mon, 9 Dec 2013 19:48:28 +0100 Subject: i2c: mux: Inherit retry count and timeout from parent for muxed bus If a muxed i2c bus gets created the default retry count and timeout of the muxed bus is zero. Hence it it possible that you end up with a situation where the parent controller sets a default retry count and timeout which gets applied and used while the muxed bus (using the same controller) has a default retry count of zero and a default timeout of 1s (set in i2c_add_adapter()). This can be solved by initializing the retry count and timeout of the muxed bus with the values used by the the parent at creation time. Signed-off-by: Elie De Brauwer Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 797e311..2d0847b 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -139,6 +139,8 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, priv->adap.algo = &priv->algo; priv->adap.algo_data = priv; priv->adap.dev.parent = &parent->dev; + priv->adap.retries = parent->retries; + priv->adap.timeout = parent->timeout; /* Sanity check on class */ if (i2c_mux_parent_classes(parent) & class) -- cgit v0.10.2 From 338c7dbadd2671189cec7faf64c84d01071b3f96 Mon Sep 17 00:00:00 2001 From: Andy Honig Date: Mon, 18 Nov 2013 16:09:22 -0800 Subject: KVM: Improve create VCPU parameter (CVE-2013-4587) In multiple functions the vcpu_id is used as an offset into a bitfield. Ag malicious user could specify a vcpu_id greater than 255 in order to set or clear bits in kernel memory. This could be used to elevate priveges in the kernel. This patch verifies that the vcpu_id provided is less than 255. The api documentation already specifies that the vcpu_id must be less than max_vcpus, but this is currently not checked. Reported-by: Andrew Honig Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig Signed-off-by: Paolo Bonzini diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index a0aa84b..4f588bc 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1898,6 +1898,9 @@ static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id) int r; struct kvm_vcpu *vcpu, *v; + if (id >= KVM_MAX_VCPUS) + return -EINVAL; + vcpu = kvm_arch_vcpu_create(kvm, id); if (IS_ERR(vcpu)) return PTR_ERR(vcpu); -- cgit v0.10.2 From b963a22e6d1a266a67e9eecc88134713fd54775c Mon Sep 17 00:00:00 2001 From: Andy Honig Date: Tue, 19 Nov 2013 14:12:18 -0800 Subject: KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367) Under guest controllable circumstances apic_get_tmcct will execute a divide by zero and cause a crash. If the guest cpuid support tsc deadline timers and performs the following sequence of requests the host will crash. - Set the mode to periodic - Set the TMICT to 0 - Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline) - Set the TMICT to non-zero. Then the lapic_timer.period will be 0, but the TMICT will not be. If the guest then reads from the TMCCT then the host will perform a divide by 0. This patch ensures that if the lapic_timer.period is 0, then the division does not occur. Reported-by: Andrew Honig Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 5439117..89b52ec 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -841,7 +841,8 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic) ASSERT(apic != NULL); /* if initial count is 0, current count should also be 0 */ - if (kvm_apic_get_reg(apic, APIC_TMICT) == 0) + if (kvm_apic_get_reg(apic, APIC_TMICT) == 0 || + apic->lapic_timer.period == 0) return 0; remaining = hrtimer_get_remaining(&apic->lapic_timer.timer); -- cgit v0.10.2 From fda4e2e85589191b123d31cdc21fd33ee70f50fd Mon Sep 17 00:00:00 2001 From: Andy Honig Date: Wed, 20 Nov 2013 10:23:22 -0800 Subject: KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368) In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 89b52ec..b8bec45 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1692,7 +1692,6 @@ static void apic_sync_pv_eoi_from_guest(struct kvm_vcpu *vcpu, void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu) { u32 data; - void *vapic; if (test_bit(KVM_APIC_PV_EOI_PENDING, &vcpu->arch.apic_attention)) apic_sync_pv_eoi_from_guest(vcpu, vcpu->arch.apic); @@ -1700,9 +1699,8 @@ void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu) if (!test_bit(KVM_APIC_CHECK_VAPIC, &vcpu->arch.apic_attention)) return; - vapic = kmap_atomic(vcpu->arch.apic->vapic_page); - data = *(u32 *)(vapic + offset_in_page(vcpu->arch.apic->vapic_addr)); - kunmap_atomic(vapic); + kvm_read_guest_cached(vcpu->kvm, &vcpu->arch.apic->vapic_cache, &data, + sizeof(u32)); apic_set_tpr(vcpu->arch.apic, data & 0xff); } @@ -1738,7 +1736,6 @@ void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu) u32 data, tpr; int max_irr, max_isr; struct kvm_lapic *apic = vcpu->arch.apic; - void *vapic; apic_sync_pv_eoi_to_guest(vcpu, apic); @@ -1754,18 +1751,24 @@ void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu) max_isr = 0; data = (tpr & 0xff) | ((max_isr & 0xf0) << 8) | (max_irr << 24); - vapic = kmap_atomic(vcpu->arch.apic->vapic_page); - *(u32 *)(vapic + offset_in_page(vcpu->arch.apic->vapic_addr)) = data; - kunmap_atomic(vapic); + kvm_write_guest_cached(vcpu->kvm, &vcpu->arch.apic->vapic_cache, &data, + sizeof(u32)); } -void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr) +int kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr) { - vcpu->arch.apic->vapic_addr = vapic_addr; - if (vapic_addr) + if (vapic_addr) { + if (kvm_gfn_to_hva_cache_init(vcpu->kvm, + &vcpu->arch.apic->vapic_cache, + vapic_addr, sizeof(u32))) + return -EINVAL; __set_bit(KVM_APIC_CHECK_VAPIC, &vcpu->arch.apic_attention); - else + } else { __clear_bit(KVM_APIC_CHECK_VAPIC, &vcpu->arch.apic_attention); + } + + vcpu->arch.apic->vapic_addr = vapic_addr; + return 0; } int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data) diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h index c730ac9..c8b0d0d 100644 --- a/arch/x86/kvm/lapic.h +++ b/arch/x86/kvm/lapic.h @@ -34,7 +34,7 @@ struct kvm_lapic { */ void *regs; gpa_t vapic_addr; - struct page *vapic_page; + struct gfn_to_hva_cache vapic_cache; unsigned long pending_events; unsigned int sipi_vector; }; @@ -76,7 +76,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data); void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset); void kvm_apic_set_eoi_accelerated(struct kvm_vcpu *vcpu, int vector); -void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr); +int kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr); void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu); void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 21ef1ba..5d004da 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3214,8 +3214,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = -EFAULT; if (copy_from_user(&va, argp, sizeof va)) goto out; - r = 0; - kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr); + r = kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr); break; } case KVM_X86_SETUP_MCE: { @@ -5739,36 +5738,6 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) !kvm_event_needs_reinjection(vcpu); } -static int vapic_enter(struct kvm_vcpu *vcpu) -{ - struct kvm_lapic *apic = vcpu->arch.apic; - struct page *page; - - if (!apic || !apic->vapic_addr) - return 0; - - page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); - if (is_error_page(page)) - return -EFAULT; - - vcpu->arch.apic->vapic_page = page; - return 0; -} - -static void vapic_exit(struct kvm_vcpu *vcpu) -{ - struct kvm_lapic *apic = vcpu->arch.apic; - int idx; - - if (!apic || !apic->vapic_addr) - return; - - idx = srcu_read_lock(&vcpu->kvm->srcu); - kvm_release_page_dirty(apic->vapic_page); - mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); - srcu_read_unlock(&vcpu->kvm->srcu, idx); -} - static void update_cr8_intercept(struct kvm_vcpu *vcpu) { int max_irr, tpr; @@ -6069,11 +6038,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) struct kvm *kvm = vcpu->kvm; vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); - r = vapic_enter(vcpu); - if (r) { - srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); - return r; - } r = 1; while (r > 0) { @@ -6132,8 +6096,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); - vapic_exit(vcpu); - return r; } -- cgit v0.10.2 From 17d68b763f09a9ce824ae23eb62c9efc57b69271 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 12 Dec 2013 21:20:08 +0100 Subject: KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376) A guest can cause a BUG_ON() leading to a host kernel crash. When the guest writes to the ICR to request an IPI, while in x2apic mode the following things happen, the destination is read from ICR2, which is a register that the guest can control. kvm_irq_delivery_to_apic_fast uses the high 16 bits of ICR2 as the cluster id. A BUG_ON is triggered, which is a protection against accessing map->logical_map with an out-of-bounds access and manages to avoid that anything really unsafe occurs. The logic in the code is correct from real HW point of view. The problem is that KVM supports only one cluster with ID 0 in clustered mode, but the code that has the bug does not take this into account. Reported-by: Lars Bull Cc: stable@vger.kernel.org Signed-off-by: Gleb Natapov Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index b8bec45..dec48bf 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -143,6 +143,8 @@ static inline int kvm_apic_id(struct kvm_lapic *apic) return (kvm_apic_get_reg(apic, APIC_ID) >> 24) & 0xff; } +#define KVM_X2APIC_CID_BITS 0 + static void recalculate_apic_map(struct kvm *kvm) { struct kvm_apic_map *new, *old = NULL; @@ -180,7 +182,8 @@ static void recalculate_apic_map(struct kvm *kvm) if (apic_x2apic_mode(apic)) { new->ldr_bits = 32; new->cid_shift = 16; - new->cid_mask = new->lid_mask = 0xffff; + new->cid_mask = (1 << KVM_X2APIC_CID_BITS) - 1; + new->lid_mask = 0xffff; } else if (kvm_apic_sw_enabled(apic) && !new->cid_mask /* flat mode */ && kvm_apic_get_reg(apic, APIC_DFR) == APIC_DFR_CLUSTER) { -- cgit v0.10.2 From e5bf216a945e7292f8718276372d2b41486bed26 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 4 Dec 2013 20:21:37 -0200 Subject: i2c: imx: Check the return value from clk_prepare_enable() clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 1d7efa3..d0cfbb4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -312,7 +312,9 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - clk_prepare_enable(i2c_imx->clk); + result = clk_prepare_enable(i2c_imx->clk); + if (result) + return result; imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR); /* Enable I2C controller */ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); -- cgit v0.10.2 From 47180068276a04ed31d24fe04c673138208b07a9 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 4 Dec 2013 16:10:45 -0500 Subject: selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output() In selinux_ip_output() we always label packets based on the parent socket. While this approach works in almost all cases, it doesn't work in the case of TCP SYN-ACK packets when the correct label is not the label of the parent socket, but rather the label of the larval socket represented by the request_sock struct. Unfortunately, since the request_sock isn't queued on the parent socket until *after* the SYN-ACK packet is sent, we can't lookup the request_sock to determine the correct label for the packet; at this point in time the best we can do is simply pass/NF_ACCEPT the packet. It must be said that simply passing the packet without any explicit labeling action, while far from ideal, is not terrible as the SYN-ACK packet will inherit any IP option based labeling from the initial connection request so the label *should* be correct and all our access controls remain in place so we shouldn't have to worry about information leaks. Reported-by: Janak Desai Tested-by: Janak Desai Cc: stable@vger.kernel.org Signed-off-by: Paul Moore diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 777ee98..877bab7 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -53,6 +53,7 @@ #include /* for local_port_range[] */ #include #include /* struct or_callable used in sock_rcv_skb */ +#include #include #include #include @@ -4731,6 +4732,7 @@ static unsigned int selinux_ipv6_forward(unsigned int hooknum, static unsigned int selinux_ip_output(struct sk_buff *skb, u16 family) { + struct sock *sk; u32 sid; if (!netlbl_enabled()) @@ -4739,8 +4741,27 @@ static unsigned int selinux_ip_output(struct sk_buff *skb, /* we do this in the LOCAL_OUT path and not the POST_ROUTING path * because we want to make sure we apply the necessary labeling * before IPsec is applied so we can leverage AH protection */ - if (skb->sk) { - struct sk_security_struct *sksec = skb->sk->sk_security; + sk = skb->sk; + if (sk) { + struct sk_security_struct *sksec; + + if (sk->sk_state == TCP_LISTEN) + /* if the socket is the listening state then this + * packet is a SYN-ACK packet which means it needs to + * be labeled based on the connection/request_sock and + * not the parent socket. unfortunately, we can't + * lookup the request_sock yet as it isn't queued on + * the parent socket until after the SYN-ACK is sent. + * the "solution" is to simply pass the packet as-is + * as any IP option based labeling should be copied + * from the initial connection request (in the IP + * layer). it is far from ideal, but until we get a + * security label in the packet itself this is the + * best we can do. */ + return NF_ACCEPT; + + /* standard practice, label using the parent socket */ + sksec = sk->sk_security; sid = sksec->sid; } else sid = SECINITSID_KERNEL; -- cgit v0.10.2 From 446b802437f285de68ffb8d6fac3c44c3cab5b04 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 4 Dec 2013 16:10:51 -0500 Subject: selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute() In selinux_ip_postroute() we perform access checks based on the packet's security label. For locally generated traffic we get the packet's security label from the associated socket; this works in all cases except for TCP SYN-ACK packets. In the case of SYN-ACK packet's the correct security label is stored in the connection's request_sock, not the server's socket. Unfortunately, at the point in time when selinux_ip_postroute() is called we can't query the request_sock directly, we need to recreate the label using the same logic that originally labeled the associated request_sock. See the inline comments for more explanation. Reported-by: Janak Desai Tested-by: Janak Desai Cc: stable@vger.kernel.org Signed-off-by: Paul Moore diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 877bab7..cc076a9 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3847,6 +3847,30 @@ static int selinux_skb_peerlbl_sid(struct sk_buff *skb, u16 family, u32 *sid) return 0; } +/** + * selinux_conn_sid - Determine the child socket label for a connection + * @sk_sid: the parent socket's SID + * @skb_sid: the packet's SID + * @conn_sid: the resulting connection SID + * + * If @skb_sid is valid then the user:role:type information from @sk_sid is + * combined with the MLS information from @skb_sid in order to create + * @conn_sid. If @skb_sid is not valid then then @conn_sid is simply a copy + * of @sk_sid. Returns zero on success, negative values on failure. + * + */ +static int selinux_conn_sid(u32 sk_sid, u32 skb_sid, u32 *conn_sid) +{ + int err = 0; + + if (skb_sid != SECSID_NULL) + err = security_sid_mls_copy(sk_sid, skb_sid, conn_sid); + else + *conn_sid = sk_sid; + + return err; +} + /* socket security operations */ static int socket_sockcreate_sid(const struct task_security_struct *tsec, @@ -4453,7 +4477,7 @@ static int selinux_inet_conn_request(struct sock *sk, struct sk_buff *skb, struct sk_security_struct *sksec = sk->sk_security; int err; u16 family = sk->sk_family; - u32 newsid; + u32 connsid; u32 peersid; /* handle mapped IPv4 packets arriving via IPv6 sockets */ @@ -4463,16 +4487,11 @@ static int selinux_inet_conn_request(struct sock *sk, struct sk_buff *skb, err = selinux_skb_peerlbl_sid(skb, family, &peersid); if (err) return err; - if (peersid == SECSID_NULL) { - req->secid = sksec->sid; - req->peer_secid = SECSID_NULL; - } else { - err = security_sid_mls_copy(sksec->sid, peersid, &newsid); - if (err) - return err; - req->secid = newsid; - req->peer_secid = peersid; - } + err = selinux_conn_sid(sksec->sid, peersid, &connsid); + if (err) + return err; + req->secid = connsid; + req->peer_secid = peersid; return selinux_netlbl_inet_conn_request(req, family); } @@ -4846,12 +4865,12 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex, if (!secmark_active && !peerlbl_active) return NF_ACCEPT; - /* if the packet is being forwarded then get the peer label from the - * packet itself; otherwise check to see if it is from a local - * application or the kernel, if from an application get the peer label - * from the sending socket, otherwise use the kernel's sid */ sk = skb->sk; if (sk == NULL) { + /* Without an associated socket the packet is either coming + * from the kernel or it is being forwarded; check the packet + * to determine which and if the packet is being forwarded + * query the packet directly to determine the security label. */ if (skb->skb_iif) { secmark_perm = PACKET__FORWARD_OUT; if (selinux_skb_peerlbl_sid(skb, family, &peer_sid)) @@ -4860,7 +4879,26 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex, secmark_perm = PACKET__SEND; peer_sid = SECINITSID_KERNEL; } + } else if (sk->sk_state == TCP_LISTEN) { + /* Locally generated packet but the associated socket is in the + * listening state which means this is a SYN-ACK packet. In + * this particular case the correct security label is assigned + * to the connection/request_sock but unfortunately we can't + * query the request_sock as it isn't queued on the parent + * socket until after the SYN-ACK packet is sent; the only + * viable choice is to regenerate the label like we do in + * selinux_inet_conn_request(). See also selinux_ip_output() + * for similar problems. */ + u32 skb_sid; + struct sk_security_struct *sksec = sk->sk_security; + if (selinux_skb_peerlbl_sid(skb, family, &skb_sid)) + return NF_DROP; + if (selinux_conn_sid(sksec->sid, skb_sid, &peer_sid)) + return NF_DROP; + secmark_perm = PACKET__SEND; } else { + /* Locally generated packet, fetch the security label from the + * associated socket. */ struct sk_security_struct *sksec = sk->sk_security; peer_sid = sksec->sid; secmark_perm = PACKET__SEND; -- cgit v0.10.2 From 817eff718dca4e54d5721211ddde0914428fbb7c Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 10 Dec 2013 14:57:54 -0500 Subject: selinux: look for IPsec labels on both inbound and outbound packets Previously selinux_skb_peerlbl_sid() would only check for labeled IPsec security labels on inbound packets, this patch enables it to check both inbound and outbound traffic for labeled IPsec security labels. Reported-by: Janak Desai Cc: stable@vger.kernel.org Signed-off-by: Paul Moore diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index cc076a9..8b28123 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3829,7 +3829,7 @@ static int selinux_skb_peerlbl_sid(struct sk_buff *skb, u16 family, u32 *sid) u32 nlbl_sid; u32 nlbl_type; - err = selinux_skb_xfrm_sid(skb, &xfrm_sid); + err = selinux_xfrm_skb_sid(skb, &xfrm_sid); if (unlikely(err)) return -EACCES; err = selinux_netlbl_skbuff_getsid(skb, family, &nlbl_type, &nlbl_sid); diff --git a/security/selinux/include/xfrm.h b/security/selinux/include/xfrm.h index 0dec76c..48c3cc9 100644 --- a/security/selinux/include/xfrm.h +++ b/security/selinux/include/xfrm.h @@ -39,6 +39,7 @@ int selinux_xfrm_sock_rcv_skb(u32 sk_sid, struct sk_buff *skb, int selinux_xfrm_postroute_last(u32 sk_sid, struct sk_buff *skb, struct common_audit_data *ad, u8 proto); int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall); +int selinux_xfrm_skb_sid(struct sk_buff *skb, u32 *sid); static inline void selinux_xfrm_notify_policyload(void) { @@ -79,11 +80,12 @@ static inline int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, static inline void selinux_xfrm_notify_policyload(void) { } -#endif -static inline int selinux_skb_xfrm_sid(struct sk_buff *skb, u32 *sid) +static inline int selinux_xfrm_skb_sid(struct sk_buff *skb, u32 *sid) { - return selinux_xfrm_decode_session(skb, sid, 0); + *sid = SECSID_NULL; + return 0; } +#endif #endif /* _SELINUX_XFRM_H_ */ diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index cf79a45..0462cb3 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -209,19 +209,26 @@ int selinux_xfrm_state_pol_flow_match(struct xfrm_state *x, NULL) ? 0 : 1); } -/* - * LSM hook implementation that checks and/or returns the xfrm sid for the - * incoming packet. - */ -int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall) +static u32 selinux_xfrm_skb_sid_egress(struct sk_buff *skb) { - u32 sid_session = SECSID_NULL; - struct sec_path *sp; + struct dst_entry *dst = skb_dst(skb); + struct xfrm_state *x; - if (skb == NULL) - goto out; + if (dst == NULL) + return SECSID_NULL; + x = dst->xfrm; + if (x == NULL || !selinux_authorizable_xfrm(x)) + return SECSID_NULL; + + return x->security->ctx_sid; +} + +static int selinux_xfrm_skb_sid_ingress(struct sk_buff *skb, + u32 *sid, int ckall) +{ + u32 sid_session = SECSID_NULL; + struct sec_path *sp = skb->sp; - sp = skb->sp; if (sp) { int i; @@ -248,6 +255,30 @@ out: } /* + * LSM hook implementation that checks and/or returns the xfrm sid for the + * incoming packet. + */ +int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall) +{ + if (skb == NULL) { + *sid = SECSID_NULL; + return 0; + } + return selinux_xfrm_skb_sid_ingress(skb, sid, ckall); +} + +int selinux_xfrm_skb_sid(struct sk_buff *skb, u32 *sid) +{ + int rc; + + rc = selinux_xfrm_skb_sid_ingress(skb, sid, 0); + if (rc == 0 && *sid == SECSID_NULL) + *sid = selinux_xfrm_skb_sid_egress(skb); + + return rc; +} + +/* * LSM hook implementation that allocs and transfers uctx spec to xfrm_policy. */ int selinux_xfrm_policy_alloc(struct xfrm_sec_ctx **ctxp, -- cgit v0.10.2 From c0828e50485932b7e019df377a6b0a8d1ebd3080 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 10 Dec 2013 14:58:01 -0500 Subject: selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute() Due to difficulty in arriving at the proper security label for TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets while/before they are undergoing XFRM transforms instead of waiting until afterwards so that we can determine the correct security label. Reported-by: Janak Desai Cc: stable@vger.kernel.org Signed-off-by: Paul Moore diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 8b28123..6db2e58 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4850,22 +4850,31 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex, * as fast and as clean as possible. */ if (!selinux_policycap_netpeer) return selinux_ip_postroute_compat(skb, ifindex, family); + + secmark_active = selinux_secmark_enabled(); + peerlbl_active = selinux_peerlbl_enabled(); + if (!secmark_active && !peerlbl_active) + return NF_ACCEPT; + + sk = skb->sk; + #ifdef CONFIG_XFRM /* If skb->dst->xfrm is non-NULL then the packet is undergoing an IPsec * packet transformation so allow the packet to pass without any checks * since we'll have another chance to perform access control checks * when the packet is on it's final way out. * NOTE: there appear to be some IPv6 multicast cases where skb->dst - * is NULL, in this case go ahead and apply access control. */ - if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL) + * is NULL, in this case go ahead and apply access control. + * NOTE: if this is a local socket (skb->sk != NULL) that is in the + * TCP listening state we cannot wait until the XFRM processing + * is done as we will miss out on the SA label if we do; + * unfortunately, this means more work, but it is only once per + * connection. */ + if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL && + !(sk != NULL && sk->sk_state == TCP_LISTEN)) return NF_ACCEPT; #endif - secmark_active = selinux_secmark_enabled(); - peerlbl_active = selinux_peerlbl_enabled(); - if (!secmark_active && !peerlbl_active) - return NF_ACCEPT; - sk = skb->sk; if (sk == NULL) { /* Without an associated socket the packet is either coming * from the kernel or it is being forwarded; check the packet @@ -4893,6 +4902,25 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex, struct sk_security_struct *sksec = sk->sk_security; if (selinux_skb_peerlbl_sid(skb, family, &skb_sid)) return NF_DROP; + /* At this point, if the returned skb peerlbl is SECSID_NULL + * and the packet has been through at least one XFRM + * transformation then we must be dealing with the "final" + * form of labeled IPsec packet; since we've already applied + * all of our access controls on this packet we can safely + * pass the packet. */ + if (skb_sid == SECSID_NULL) { + switch (family) { + case PF_INET: + if (IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) + return NF_ACCEPT; + break; + case PF_INET6: + if (IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) + return NF_ACCEPT; + default: + return NF_DROP_ERR(-ECONNREFUSED); + } + } if (selinux_conn_sid(sksec->sid, skb_sid, &peer_sid)) return NF_DROP; secmark_perm = PACKET__SEND; -- cgit v0.10.2 From 9c59ac616137fb62f6cb3f1219201b09cbcf30be Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 9 Dec 2013 18:36:26 -0300 Subject: Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string" This partially reverts c0f3b8643a6fa2461d70760ec49d21d2b031d611. The "armada370-nand" compatible support is not complete, and it was mistake to add it. Revert it and postpone the support until the infrastructure is in place. Cc: # 3.12 Signed-off-by: Ezequiel Garcia Acked-by: Jason Cooper Signed-off-by: Brian Norris diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 4cabdc9..f3d4fea 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1259,10 +1259,6 @@ static struct of_device_id pxa3xx_nand_dt_ids[] = { .compatible = "marvell,pxa3xx-nand", .data = (void *)PXA3XX_NAND_VARIANT_PXA, }, - { - .compatible = "marvell,armada370-nand", - .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, - }, {} }; MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); -- cgit v0.10.2 From 15b540c71cac840f0a3e8b1b4b7a773deb847ffb Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 10 Dec 2013 09:57:15 -0300 Subject: mtd: nand: pxa3xx: Use info->use_dma to release DMA resources In commit: commit 62e8b851783138a11da63285be0fbf69530ff73d Author: Ezequiel Garcia Date: Fri Oct 4 15:30:38 2013 -0300 mtd: nand: pxa3xx: Allocate data buffer on detected flash size the way the buffer is allocated was changed: the first READ_ID is issued with a small kmalloc'ed buffer. Only once the flash page size is detected the DMA buffers are allocated, and info->use_dma is set. Currently, if the device detection fails, the driver checks the 'use_dma' module parameter and tries to release unallocated DMA resources. Fix this by checking the proper indicator of the DMA allocation, which is 'info->use_dma'. Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index f3d4fea..4b3aaa8 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -962,7 +962,7 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) { struct platform_device *pdev = info->pdev; - if (use_dma) { + if (info->use_dma) { pxa_free_dma(info->data_dma_ch); dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); -- cgit v0.10.2 From f40386a4e976acb2bd3e0f9ead11e8e769acbe98 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 12 Dec 2013 17:12:19 -0800 Subject: include/linux/hugetlb.h: make isolate_huge_page() an inline With CONFIG_HUGETLBFS=n: mm/migrate.c: In function `do_move_page_to_node_array': include/linux/hugetlb.h:140:33: warning: statement with no effect [-Wunused-value] #define isolate_huge_page(p, l) false ^ mm/migrate.c:1170:4: note: in expansion of macro `isolate_huge_page' isolate_huge_page(page, &pagelist); Reported-by: Borislav Petkov Tested-by: Borislav Petkov Signed-off-by: Naoya Horiguchi Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 9649ff0..bd7e987 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -142,7 +142,10 @@ static inline int dequeue_hwpoisoned_huge_page(struct page *page) return 0; } -#define isolate_huge_page(p, l) false +static inline bool isolate_huge_page(struct page *page, struct list_head *list) +{ + return false; +} #define putback_active_hugepage(p) do {} while (0) #define is_hugepage_active(x) false -- cgit v0.10.2 From a0d8b00a3381f9d75764b3377590451cb0b4fe41 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 12 Dec 2013 17:12:20 -0800 Subject: mm: memcg: do not declare OOM from __GFP_NOFAIL allocations Commit 84235de394d9 ("fs: buffer: move allocation failure loop into the allocator") started recognizing __GFP_NOFAIL in memory cgroups but forgot to disable the OOM killer. Any task that does not fail allocation will also not enter the OOM completion path. So don't declare an OOM state in this case or it'll be leaked and the task be able to bypass the limit until the next userspace-triggered page fault cleans up the OOM state. Reported-by: William Dauchy Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Cc: David Rientjes Cc: [3.12.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index f1a0ae6..e3aff01 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2696,6 +2696,9 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, if (unlikely(task_in_memcg_oom(current))) goto bypass; + if (gfp_mask & __GFP_NOFAIL) + oom = false; + /* * We always charge the cgroup the mm_struct belongs to. * The mm_struct's mem_cgroup changes on task migration if the -- cgit v0.10.2 From ae5758a1a7b7bdfdcfaf2d78a5a0f8675149dd79 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Dec 2013 17:12:22 -0800 Subject: procfs: also fix proc_reg_get_unmapped_area() for !MMU case Commit fad1a86e25e0 ("procfs: call default get_unmapped_area on MMU-present architectures"), as its title says, took care of only the MMU case, leaving the !MMU side still in the regressed state (returning -EIO in all cases where pde->proc_fops->get_unmapped_area is NULL). From the fad1a86e25e0 changelog: "Commit c4fe24485729 ("sparc: fix PCI device proc file mmap(2)") added proc_reg_get_unmapped_area in proc_reg_file_ops and proc_reg_file_ops_no_compat, by which now mmap always returns EIO if get_unmapped_area method is not defined for the target procfs file, which causes regression of mmap on /proc/vmcore. To address this issue, like get_unmapped_area(), call default current->mm->get_unmapped_area on MMU-present architectures if pde->proc_fops->get_unmapped_area, i.e. the one in actual file operation in the procfs file, is not defined" Signed-off-by: Jan Beulich Cc: HATAYAMA Daisuke Cc: Alexey Dobriyan Cc: David S. Miller Cc: [3.12.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/inode.c b/fs/proc/inode.c index 28955d4..124fc43 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -292,16 +292,20 @@ proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr, { struct proc_dir_entry *pde = PDE(file_inode(file)); unsigned long rv = -EIO; - unsigned long (*get_area)(struct file *, unsigned long, unsigned long, - unsigned long, unsigned long) = NULL; + if (use_pde(pde)) { + typeof(proc_reg_get_unmapped_area) *get_area; + + get_area = pde->proc_fops->get_unmapped_area; #ifdef CONFIG_MMU - get_area = current->mm->get_unmapped_area; + if (!get_area) + get_area = current->mm->get_unmapped_area; #endif - if (pde->proc_fops->get_unmapped_area) - get_area = pde->proc_fops->get_unmapped_area; + if (get_area) rv = get_area(file, orig_addr, len, pgoff, flags); + else + rv = orig_addr; unuse_pde(pde); } return rv; -- cgit v0.10.2 From eb3c227289840eed95ddfb0516046f08d8993940 Mon Sep 17 00:00:00 2001 From: Linus Pizunski Date: Thu, 12 Dec 2013 17:12:23 -0800 Subject: drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap Update month and day of month to the alarm month/day instead of current day/month when setting the RTC alarm mask. Signed-off-by: Linus Pizunski Signed-off-by: Nicolas Ferre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index c0da95e..3281c90 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -220,6 +220,8 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) at91_alarm_year = tm.tm_year; + tm.tm_mon = alrm->time.tm_mon; + tm.tm_mday = alrm->time.tm_mday; tm.tm_hour = alrm->time.tm_hour; tm.tm_min = alrm->time.tm_min; tm.tm_sec = alrm->time.tm_sec; -- cgit v0.10.2 From 386e79066f04850352f144e67edfd5b636c0f95c Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 12 Dec 2013 17:12:24 -0800 Subject: include/linux/kernel.h: make might_fault() a nop for !MMU The machine cannot fault if !MUU, so make might_fault() a nop for !MMU. This fixes below build error if !CONFIG_MMU && (CONFIG_PROVE_LOCKING=y || CONFIG_DEBUG_ATOMIC_SLEEP=y): arch/arm/kernel/built-in.o: In function `arch_ptrace': arch/arm/kernel/ptrace.c:852: undefined reference to `might_fault' arch/arm/kernel/built-in.o: In function `restore_sigframe': arch/arm/kernel/signal.c:173: undefined reference to `might_fault' ... arch/arm/kernel/built-in.o:arch/arm/kernel/signal.c:177: more undefined references to `might_fault' follow make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin Acked-by: Michael S. Tsirkin Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d4e98d1..ecb8754 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -193,7 +193,8 @@ extern int _cond_resched(void); (__x < 0) ? -__x : __x; \ }) -#if defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_DEBUG_ATOMIC_SLEEP) +#if defined(CONFIG_MMU) && \ + (defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_DEBUG_ATOMIC_SLEEP)) void might_fault(void); #else static inline void might_fault(void) { } -- cgit v0.10.2 From 5ccb7d718e1551ed672b7e2e39fb626dc869594b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 12 Dec 2013 17:12:25 -0800 Subject: drivers/rtc/rtc-s5m.c: fix info->rtc assignment Fix this warning: drivers/rtc/rtc-s5m.c: In function `s5m_rtc_probe': drivers/rtc/rtc-s5m.c:545: warning: assignment from incompatible pointer type struct s5m_rtc_info.rtc has type "struct regmap *", while struct sec_pmic_dev.rtc has type "struct i2c_client *". Probably the author wanted to assign "struct sec_pmic_dev.regmap", which has the correct type. Also, as "rtc" doesn't make much sense as a name for a regmap, rename it to "regmap". Signed-off-by: Geert Uytterhoeven Cc: Sangbeom Kim Cc: Sachin Kamat Tested-by: Krzysztof Kozlowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index b7fd02b..1dfa488 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -31,7 +31,7 @@ struct s5m_rtc_info { struct device *dev; struct sec_pmic_dev *s5m87xx; - struct regmap *rtc; + struct regmap *regmap; struct rtc_device *rtc_dev; int irq; int device_type; @@ -89,7 +89,7 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) int ret; unsigned int data; - ret = regmap_read(info->rtc, SEC_RTC_UDR_CON, &data); + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); if (ret < 0) { dev_err(info->dev, "failed to read update reg(%d)\n", ret); return ret; @@ -98,14 +98,14 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) data |= RTC_TIME_EN_MASK; data |= RTC_UDR_MASK; - ret = regmap_write(info->rtc, SEC_RTC_UDR_CON, data); + ret = regmap_write(info->regmap, SEC_RTC_UDR_CON, data); if (ret < 0) { dev_err(info->dev, "failed to write update reg(%d)\n", ret); return ret; } do { - ret = regmap_read(info->rtc, SEC_RTC_UDR_CON, &data); + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); } while ((data & RTC_UDR_MASK) && !ret); return ret; @@ -116,7 +116,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) int ret; unsigned int data; - ret = regmap_read(info->rtc, SEC_RTC_UDR_CON, &data); + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); if (ret < 0) { dev_err(info->dev, "%s: fail to read update reg(%d)\n", __func__, ret); @@ -126,7 +126,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) data &= ~RTC_TIME_EN_MASK; data |= RTC_UDR_MASK; - ret = regmap_write(info->rtc, SEC_RTC_UDR_CON, data); + ret = regmap_write(info->regmap, SEC_RTC_UDR_CON, data); if (ret < 0) { dev_err(info->dev, "%s: fail to write update reg(%d)\n", __func__, ret); @@ -134,7 +134,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) } do { - ret = regmap_read(info->rtc, SEC_RTC_UDR_CON, &data); + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); } while ((data & RTC_UDR_MASK) && !ret); return ret; @@ -178,7 +178,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm) u8 data[8]; int ret; - ret = regmap_bulk_read(info->rtc, SEC_RTC_SEC, data, 8); + ret = regmap_bulk_read(info->regmap, SEC_RTC_SEC, data, 8); if (ret < 0) return ret; @@ -226,7 +226,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm) 1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday); - ret = regmap_raw_write(info->rtc, SEC_RTC_SEC, data, 8); + ret = regmap_raw_write(info->regmap, SEC_RTC_SEC, data, 8); if (ret < 0) return ret; @@ -242,20 +242,20 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) unsigned int val; int ret, i; - ret = regmap_bulk_read(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_bulk_read(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; switch (info->device_type) { case S5M8763X: s5m8763_data_to_tm(data, &alrm->time); - ret = regmap_read(info->rtc, SEC_ALARM0_CONF, &val); + ret = regmap_read(info->regmap, SEC_ALARM0_CONF, &val); if (ret < 0) return ret; alrm->enabled = !!val; - ret = regmap_read(info->rtc, SEC_RTC_STATUS, &val); + ret = regmap_read(info->regmap, SEC_RTC_STATUS, &val); if (ret < 0) return ret; @@ -278,7 +278,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) } alrm->pending = 0; - ret = regmap_read(info->rtc, SEC_RTC_STATUS, &val); + ret = regmap_read(info->regmap, SEC_RTC_STATUS, &val); if (ret < 0) return ret; break; @@ -301,7 +301,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info) int ret, i; struct rtc_time tm; - ret = regmap_bulk_read(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_bulk_read(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; @@ -312,14 +312,14 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info) switch (info->device_type) { case S5M8763X: - ret = regmap_write(info->rtc, SEC_ALARM0_CONF, 0); + ret = regmap_write(info->regmap, SEC_ALARM0_CONF, 0); break; case S5M8767X: for (i = 0; i < 7; i++) data[i] &= ~ALARM_ENABLE_MASK; - ret = regmap_raw_write(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_raw_write(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; @@ -341,7 +341,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info) u8 alarm0_conf; struct rtc_time tm; - ret = regmap_bulk_read(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_bulk_read(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; @@ -353,7 +353,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info) switch (info->device_type) { case S5M8763X: alarm0_conf = 0x77; - ret = regmap_write(info->rtc, SEC_ALARM0_CONF, alarm0_conf); + ret = regmap_write(info->regmap, SEC_ALARM0_CONF, alarm0_conf); break; case S5M8767X: @@ -368,7 +368,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info) if (data[RTC_YEAR1] & 0x7f) data[RTC_YEAR1] |= ALARM_ENABLE_MASK; - ret = regmap_raw_write(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_raw_write(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; ret = s5m8767_rtc_set_alarm_reg(info); @@ -410,7 +410,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) if (ret < 0) return ret; - ret = regmap_raw_write(info->rtc, SEC_ALARM0_SEC, data, 8); + ret = regmap_raw_write(info->regmap, SEC_ALARM0_SEC, data, 8); if (ret < 0) return ret; @@ -455,7 +455,7 @@ static const struct rtc_class_ops s5m_rtc_ops = { static void s5m_rtc_enable_wtsr(struct s5m_rtc_info *info, bool enable) { int ret; - ret = regmap_update_bits(info->rtc, SEC_WTSR_SMPL_CNTL, + ret = regmap_update_bits(info->regmap, SEC_WTSR_SMPL_CNTL, WTSR_ENABLE_MASK, enable ? WTSR_ENABLE_MASK : 0); if (ret < 0) @@ -466,7 +466,7 @@ static void s5m_rtc_enable_wtsr(struct s5m_rtc_info *info, bool enable) static void s5m_rtc_enable_smpl(struct s5m_rtc_info *info, bool enable) { int ret; - ret = regmap_update_bits(info->rtc, SEC_WTSR_SMPL_CNTL, + ret = regmap_update_bits(info->regmap, SEC_WTSR_SMPL_CNTL, SMPL_ENABLE_MASK, enable ? SMPL_ENABLE_MASK : 0); if (ret < 0) @@ -481,7 +481,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info) int ret; struct rtc_time tm; - ret = regmap_read(info->rtc, SEC_RTC_UDR_CON, &tp_read); + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &tp_read); if (ret < 0) { dev_err(info->dev, "%s: fail to read control reg(%d)\n", __func__, ret); @@ -493,7 +493,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info) data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); info->rtc_24hr_mode = 1; - ret = regmap_raw_write(info->rtc, SEC_ALARM0_CONF, data, 2); + ret = regmap_raw_write(info->regmap, SEC_ALARM0_CONF, data, 2); if (ret < 0) { dev_err(info->dev, "%s: fail to write controlm reg(%d)\n", __func__, ret); @@ -515,7 +515,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info) ret = s5m_rtc_set_time(info->dev, &tm); } - ret = regmap_update_bits(info->rtc, SEC_RTC_UDR_CON, + ret = regmap_update_bits(info->regmap, SEC_RTC_UDR_CON, RTC_TCON_MASK, tp_read | RTC_TCON_MASK); if (ret < 0) dev_err(info->dev, "%s: fail to update TCON reg(%d)\n", @@ -542,7 +542,7 @@ static int s5m_rtc_probe(struct platform_device *pdev) info->dev = &pdev->dev; info->s5m87xx = s5m87xx; - info->rtc = s5m87xx->rtc; + info->regmap = s5m87xx->regmap; info->device_type = s5m87xx->device_type; info->wtsr_smpl = s5m87xx->wtsr_smpl; @@ -596,7 +596,7 @@ static void s5m_rtc_shutdown(struct platform_device *pdev) if (info->wtsr_smpl) { for (i = 0; i < 3; i++) { s5m_rtc_enable_wtsr(info, false); - regmap_read(info->rtc, SEC_WTSR_SMPL_CNTL, &val); + regmap_read(info->regmap, SEC_WTSR_SMPL_CNTL, &val); pr_debug("%s: WTSR_SMPL reg(0x%02x)\n", __func__, val); if (val & WTSR_ENABLE_MASK) pr_emerg("%s: fail to disable WTSR\n", -- cgit v0.10.2 From 7b003be82676ddf0bca52e0f98e0694da2ac427f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 12 Dec 2013 17:12:26 -0800 Subject: rtc: s5m: fix unsuccesful IRQ request during probe Probe failed for rtc-s5m: s5m-rtc s5m-rtc: Failed to request alarm IRQ: 12: -22 s5m-rtc: probe of s5m-rtc failed with error -22 Fix rtc-s5m interrupt request by using regmap_irq_get_virq() for mapping the IRQ. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Acked-by: Sangbeom Kim Cc: Samuel Ortiz Cc: Lee Jones Cc: Liam Girdwood Cc: Alessandro Zummo Cc: Marek Szyprowski Cc: Geert Uytterhoeven Cc: Kyungmin Park Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 1dfa488..10982cd 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -548,11 +548,13 @@ static int s5m_rtc_probe(struct platform_device *pdev) switch (pdata->device_type) { case S5M8763X: - info->irq = s5m87xx->irq_base + S5M8763_IRQ_ALARM0; + info->irq = regmap_irq_get_virq(s5m87xx->irq_data, + S5M8763_IRQ_ALARM0); break; case S5M8767X: - info->irq = s5m87xx->irq_base + S5M8767_IRQ_RTCA1; + info->irq = regmap_irq_get_virq(s5m87xx->irq_data, + S5M8767_IRQ_RTCA1); break; default: -- cgit v0.10.2 From d73238d4a6ca2eadbd14565d769706c85650c641 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 12 Dec 2013 17:12:28 -0800 Subject: rtc: s5m: limit endless loop waiting for register update After setting alarm or time the driver is waiting for UDR register to be cleared indicating that registers data have been transferred. Limit the endless loop to only 5 retries. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Acked-by: Sangbeom Kim Cc: Samuel Ortiz Cc: Lee Jones Cc: Liam Girdwood Cc: Alessandro Zummo Cc: Marek Szyprowski Cc: Geert Uytterhoeven Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 10982cd..977b40c 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -28,6 +28,16 @@ #include #include +/* + * Maximum number of retries for checking changes in UDR field + * of SEC_RTC_UDR_CON register (to limit possible endless loop). + * + * After writing to RTC registers (setting time or alarm) read the UDR field + * in SEC_RTC_UDR_CON register. UDR is auto-cleared when data have + * been transferred. + */ +#define UDR_READ_RETRY_CNT 5 + struct s5m_rtc_info { struct device *dev; struct sec_pmic_dev *s5m87xx; @@ -84,6 +94,25 @@ static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data) } } +/* + * Read RTC_UDR_CON register and wait till UDR field is cleared. + * This indicates that time/alarm update ended. + */ +static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info) +{ + int ret, retry = UDR_READ_RETRY_CNT; + unsigned int data; + + do { + ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); + } while (--retry && (data & RTC_UDR_MASK) && !ret); + + if (!retry) + dev_err(info->dev, "waiting for UDR update, reached max number of retries\n"); + + return ret; +} + static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) { int ret; @@ -104,9 +133,7 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) return ret; } - do { - ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); - } while ((data & RTC_UDR_MASK) && !ret); + ret = s5m8767_wait_for_udr_update(info); return ret; } @@ -133,9 +160,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) return ret; } - do { - ret = regmap_read(info->regmap, SEC_RTC_UDR_CON, &data); - } while ((data & RTC_UDR_MASK) && !ret); + ret = s5m8767_wait_for_udr_update(info); return ret; } -- cgit v0.10.2 From 222ead7fd80f455ac377ae20dfeb56cab513db96 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 12 Dec 2013 17:12:30 -0800 Subject: rtc: s5m: enable IRQ wake during suspend Add PM suspend/resume ops to rtc-s5m driver and enable IRQ wake during suspend so the RTC would act like a wake up source. This allows waking up from suspend to RAM on RTC alarm interrupt. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Cc: Mark Brown Acked-by: Sangbeom Kim Cc: Samuel Ortiz Cc: Lee Jones Cc: Liam Girdwood Cc: Alessandro Zummo Cc: Marek Szyprowski Cc: Geert Uytterhoeven Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 977b40c..0ba56b7 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -639,6 +639,30 @@ static void s5m_rtc_shutdown(struct platform_device *pdev) s5m_rtc_enable_smpl(info, false); } +static int s5m_rtc_resume(struct device *dev) +{ + struct s5m_rtc_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = disable_irq_wake(info->irq); + + return ret; +} + +static int s5m_rtc_suspend(struct device *dev) +{ + struct s5m_rtc_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = enable_irq_wake(info->irq); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume); + static const struct platform_device_id s5m_rtc_id[] = { { "s5m-rtc", 0 }, }; @@ -647,6 +671,7 @@ static struct platform_driver s5m_rtc_driver = { .driver = { .name = "s5m-rtc", .owner = THIS_MODULE, + .pm = &s5m_rtc_pm_ops, }, .probe = s5m_rtc_probe, .shutdown = s5m_rtc_shutdown, -- cgit v0.10.2 From 3e1e4a5f3a324502c27c4e8808e06ac2ea842360 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 12 Dec 2013 17:12:31 -0800 Subject: mfd/rtc: s5m: fix register updating by adding regmap for RTC Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and add new regmap for RTC. On S5M8767A registers were not properly updated and read due to usage of the same regmap as the PMIC. This could be observed in various hangs, e.g. in infinite loop during waiting for UDR field change. On this chip family the RTC has different I2C address than PMIC so additional regmap is needed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Acked-by: Sangbeom Kim Cc: Samuel Ortiz Cc: Lee Jones Cc: Liam Girdwood Cc: Alessandro Zummo Cc: Marek Szyprowski Cc: Geert Uytterhoeven Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 34c18fb..54cc255 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -81,31 +81,31 @@ static struct of_device_id sec_dt_match[] = { int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest) { - return regmap_read(sec_pmic->regmap, reg, dest); + return regmap_read(sec_pmic->regmap_pmic, reg, dest); } EXPORT_SYMBOL_GPL(sec_reg_read); int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf) { - return regmap_bulk_read(sec_pmic->regmap, reg, buf, count); + return regmap_bulk_read(sec_pmic->regmap_pmic, reg, buf, count); } EXPORT_SYMBOL_GPL(sec_bulk_read); int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value) { - return regmap_write(sec_pmic->regmap, reg, value); + return regmap_write(sec_pmic->regmap_pmic, reg, value); } EXPORT_SYMBOL_GPL(sec_reg_write); int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf) { - return regmap_raw_write(sec_pmic->regmap, reg, buf, count); + return regmap_raw_write(sec_pmic->regmap_pmic, reg, buf, count); } EXPORT_SYMBOL_GPL(sec_bulk_write); int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask) { - return regmap_update_bits(sec_pmic->regmap, reg, mask, val); + return regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, val); } EXPORT_SYMBOL_GPL(sec_reg_update); @@ -166,6 +166,11 @@ static struct regmap_config s5m8767_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config sec_rtc_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + #ifdef CONFIG_OF /* * Only the common platform data elements for s5m8767 are parsed here from the @@ -266,9 +271,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, break; } - sec_pmic->regmap = devm_regmap_init_i2c(i2c, regmap); - if (IS_ERR(sec_pmic->regmap)) { - ret = PTR_ERR(sec_pmic->regmap); + sec_pmic->regmap_pmic = devm_regmap_init_i2c(i2c, regmap); + if (IS_ERR(sec_pmic->regmap_pmic)) { + ret = PTR_ERR(sec_pmic->regmap_pmic); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); return ret; @@ -277,6 +282,15 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); i2c_set_clientdata(sec_pmic->rtc, sec_pmic); + sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, + &sec_rtc_regmap_config); + if (IS_ERR(sec_pmic->regmap_rtc)) { + ret = PTR_ERR(sec_pmic->regmap_rtc); + dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n", + ret); + return ret; + } + if (pdata && pdata->cfg_pmic_irq) pdata->cfg_pmic_irq(); diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index 0dd84e9..b441b1b 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -280,19 +280,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) switch (type) { case S5M8763X: - ret = regmap_add_irq_chip(sec_pmic->regmap, sec_pmic->irq, + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, sec_pmic->irq_base, &s5m8763_irq_chip, &sec_pmic->irq_data); break; case S5M8767X: - ret = regmap_add_irq_chip(sec_pmic->regmap, sec_pmic->irq, + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, sec_pmic->irq_base, &s5m8767_irq_chip, &sec_pmic->irq_data); break; case S2MPS11X: - ret = regmap_add_irq_chip(sec_pmic->regmap, sec_pmic->irq, + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, sec_pmic->irq_base, &s2mps11_irq_chip, &sec_pmic->irq_data); diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index cbf91e2..aeb40aa 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -925,7 +925,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.dev = s5m8767->dev; config.init_data = pdata->regulators[i].initdata; config.driver_data = s5m8767; - config.regmap = iodev->regmap; + config.regmap = iodev->regmap_pmic; config.of_node = pdata->regulators[i].reg_node; rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id], diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 0ba56b7..ae8119d 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -567,7 +567,7 @@ static int s5m_rtc_probe(struct platform_device *pdev) info->dev = &pdev->dev; info->s5m87xx = s5m87xx; - info->regmap = s5m87xx->regmap; + info->regmap = s5m87xx->regmap_rtc; info->device_type = s5m87xx->device_type; info->wtsr_smpl = s5m87xx->wtsr_smpl; diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 2d0c907..cab2dd2 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -39,7 +39,8 @@ enum sec_device_type { struct sec_pmic_dev { struct device *dev; struct sec_platform_data *pdata; - struct regmap *regmap; + struct regmap *regmap_pmic; + struct regmap *regmap_rtc; struct i2c_client *i2c; struct i2c_client *rtc; -- cgit v0.10.2 From 3592806cfa08b7cca968f793c33f8e9460bab395 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 12 Dec 2013 17:12:33 -0800 Subject: thp: move preallocated PTE page table on move_huge_pmd() Andrey Wagin reported crash on VM_BUG_ON() in pgtable_pmd_page_dtor() with fallowing backtrace: free_pgd_range+0x2bf/0x410 free_pgtables+0xce/0x120 unmap_region+0xe0/0x120 do_munmap+0x249/0x360 move_vma+0x144/0x270 SyS_mremap+0x3b9/0x510 system_call_fastpath+0x16/0x1b The crash can be reproduce with this test case: #define _GNU_SOURCE #include #include #include #define MB (1024 * 1024UL) #define GB (1024 * MB) int main(int argc, char **argv) { char *p; int i; p = mmap((void *) GB, 10 * MB, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); for (i = 0; i < 10 * MB; i += 4096) p[i] = 1; mremap(p, 10 * MB, 10 * MB, MREMAP_FIXED | MREMAP_MAYMOVE, 2 * GB); return 0; } Due to split PMD lock, we now store preallocated PTE tables for THP pages per-PMD table. It means we need to move them to other PMD table if huge PMD moved there. Signed-off-by: Kirill A. Shutemov Reported-by: Andrey Vagin Tested-by: Andrey Vagin Reviewed-by: Naoya Horiguchi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index bccd5a6..33a5dc4 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1481,8 +1481,18 @@ int move_huge_pmd(struct vm_area_struct *vma, struct vm_area_struct *new_vma, pmd = pmdp_get_and_clear(mm, old_addr, old_pmd); VM_BUG_ON(!pmd_none(*new_pmd)); set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd)); - if (new_ptl != old_ptl) + if (new_ptl != old_ptl) { + pgtable_t pgtable; + + /* + * Move preallocated PTE page table if new_pmd is on + * different PMD page table. + */ + pgtable = pgtable_trans_huge_withdraw(mm, old_pmd); + pgtable_trans_huge_deposit(mm, new_pmd, pgtable); + spin_unlock(new_ptl); + } spin_unlock(old_ptl); } out: -- cgit v0.10.2 From 96f1c58d853497a757463e0b57fed140d6858f3a Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 12 Dec 2013 17:12:34 -0800 Subject: mm: memcg: fix race condition between memcg teardown and swapin There is a race condition between a memcg being torn down and a swapin triggered from a different memcg of a page that was recorded to belong to the exiting memcg on swapout (with CONFIG_MEMCG_SWAP extension). The result is unreclaimable pages pointing to dead memcgs, which can lead to anything from endless loops in later memcg teardown (the page is charged to all hierarchical parents but is not on any LRU list) or crashes from following the dangling memcg pointer. Memcgs with tasks in them can not be torn down and usually charges don't show up in memcgs without tasks. Swapin with the CONFIG_MEMCG_SWAP extension is the notable exception because it charges the cgroup that was recorded as owner during swapout, which may be empty and in the process of being torn down when a task in another memcg triggers the swapin: teardown: swapin: lookup_swap_cgroup_id() rcu_read_lock() mem_cgroup_lookup() css_tryget() rcu_read_unlock() disable css_tryget() call_rcu() offline_css() reparent_charges() res_counter_charge() (hierarchical!) css_put() css_free() pc->mem_cgroup = dead memcg add page to dead lru Add a final reparenting step into css_free() to make sure any such raced charges are moved out of the memcg before it's finally freed. In the longer term it would be cleaner to have the css_tryget() and the res_counter charge under the same RCU lock section so that the charge reparenting is deferred until the last charge whose tryget succeeded is visible. But this will require more invasive changes that will be harder to evaluate and backport into stable, so better defer them to a separate change set. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Cc: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e3aff01..f6a63f5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -6355,6 +6355,42 @@ static void mem_cgroup_css_offline(struct cgroup_subsys_state *css) static void mem_cgroup_css_free(struct cgroup_subsys_state *css) { struct mem_cgroup *memcg = mem_cgroup_from_css(css); + /* + * XXX: css_offline() would be where we should reparent all + * memory to prepare the cgroup for destruction. However, + * memcg does not do css_tryget() and res_counter charging + * under the same RCU lock region, which means that charging + * could race with offlining. Offlining only happens to + * cgroups with no tasks in them but charges can show up + * without any tasks from the swapin path when the target + * memcg is looked up from the swapout record and not from the + * current task as it usually is. A race like this can leak + * charges and put pages with stale cgroup pointers into + * circulation: + * + * #0 #1 + * lookup_swap_cgroup_id() + * rcu_read_lock() + * mem_cgroup_lookup() + * css_tryget() + * rcu_read_unlock() + * disable css_tryget() + * call_rcu() + * offline_css() + * reparent_charges() + * res_counter_charge() + * css_put() + * css_free() + * pc->mem_cgroup = dead memcg + * add page to lru + * + * The bulk of the charges are still moved in offline_css() to + * avoid pinning a lot of pages in case a long-term reference + * like a swapout record is deferring the css_free() to long + * after offlining. But this makes sure we catch any charges + * made after offlining: + */ + mem_cgroup_reparent_charges(memcg); memcg_destroy_kmem(memcg); __mem_cgroup_free(memcg); -- cgit v0.10.2 From 1f14c1ac19aa45118054b6d5425873c5c7fc23a1 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 12 Dec 2013 17:12:35 -0800 Subject: mm: memcg: do not allow task about to OOM kill to bypass the limit Commit 4942642080ea ("mm: memcg: handle non-error OOM situations more gracefully") allowed tasks that already entered a memcg OOM condition to bypass the memcg limit on subsequent allocation attempts hoping this would expedite finishing the page fault and executing the kill. David Rientjes is worried that this breaks memcg isolation guarantees and since there is no evidence that the bypass actually speeds up fault processing just change it so that these subsequent charge attempts fail outright. The notable exception being __GFP_NOFAIL charges which are required to bypass the limit regardless. Signed-off-by: Johannes Weiner Reported-by: David Rientjes Acked-by: Michal Hocko Acked-bt: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index f6a63f5..bf5e894 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2694,7 +2694,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, goto bypass; if (unlikely(task_in_memcg_oom(current))) - goto bypass; + goto nomem; if (gfp_mask & __GFP_NOFAIL) oom = false; -- cgit v0.10.2 From 0f58411d4fd704d8958879fb08751eae3573271b Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Thu, 5 Dec 2013 09:42:49 -0500 Subject: drm: don't double-free on driver load error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All instances of drm_dev_register are followed by drm_dev_free on failure. Don't free dev->control/render/primary on failure, as they will be freed by drm_dev_free since commit 8f6599da8e (drm: delay minor destruction to drm_dev_free()). Instead unplug them. Signed-off-by: Ilia Mirkin Reported-and-tested-by: Bruno Prémont Reviewed-by: David Herrmann Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index f53d524..66dd3a0 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -566,11 +566,11 @@ err_unload: if (dev->driver->unload) dev->driver->unload(dev); err_primary_node: - drm_put_minor(dev->primary); + drm_unplug_minor(dev->primary); err_render_node: - drm_put_minor(dev->render); + drm_unplug_minor(dev->render); err_control_node: - drm_put_minor(dev->control); + drm_unplug_minor(dev->control); err_agp: if (dev->driver->bus->agp_destroy) dev->driver->bus->agp_destroy(dev); -- cgit v0.10.2 From 36aa1b180e7398e2bd27642760bfaa4ad8c65ab6 Mon Sep 17 00:00:00 2001 From: Ulrich Weigand Date: Thu, 12 Dec 2013 15:59:34 +1100 Subject: powerpc: PTRACE_PEEKUSR always returns FPR0 There is a bug in using ptrace to access FPRs via PTRACE_PEEKUSR / PTRACE_POKEUSR. In effect, trying to access any of the FPRs always really accesses FPR0, which does seriously break debugging :-) The problem seems to have been introduced by commit 3ad26e5c4459d (Merge branch 'for-kvm' into next). [ It is indeed a merge conflict between Paul's FPU/VSX state rework and my LE patches - Anton ] Signed-off-by: Ulrich Weigand Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 75fb404..2e3d2bf 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1555,7 +1555,7 @@ long arch_ptrace(struct task_struct *child, long request, flush_fp_to_thread(child); if (fpidx < (PT_FPSCR - PT_FPR0)) - memcpy(&tmp, &child->thread.fp_state.fpr, + memcpy(&tmp, &child->thread.TS_FPR(fpidx), sizeof(long)); else tmp = child->thread.fp_state.fpscr; @@ -1588,7 +1588,7 @@ long arch_ptrace(struct task_struct *child, long request, flush_fp_to_thread(child); if (fpidx < (PT_FPSCR - PT_FPR0)) - memcpy(&child->thread.fp_state.fpr, &data, + memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long)); else child->thread.fp_state.fpscr = data; -- cgit v0.10.2 From 01666c8ee2b6afcd31de2064fbb7c097a75e5089 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:35 +1100 Subject: powerpc: Fix endian issue in setup-common.c During on LE boot we see: Partition configured for 1073741824 cpus, operating system maximum is 2048. Clearly missing a byteswap here. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index febc804..bc76cc6 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -479,7 +479,7 @@ void __init smp_setup_cpu_maps(void) if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) && (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; - const unsigned int *ireg; + const __be32 *ireg; num_addr_cell = of_n_addr_cells(dn); num_size_cell = of_n_size_cells(dn); @@ -489,7 +489,7 @@ void __init smp_setup_cpu_maps(void) if (!ireg) goto out; - maxcpus = ireg[num_addr_cell + num_size_cell]; + maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell); /* Double maxcpus for processors which have SMT capability */ if (cpu_has_feature(CPU_FTR_SMT)) -- cgit v0.10.2 From f8a1883a833bbad8e6b5ec4f0918b7797e652d65 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:36 +1100 Subject: powerpc: Fix topology core_id endian issue on LE builds cpu_to_core_id() is missing a byteswap: cat /sys/devices/system/cpu/cpu63/topology/core_id 201326592 Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index a3b64f3..c1cf4a1 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -580,7 +580,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle) int cpu_to_core_id(int cpu) { struct device_node *np; - const int *reg; + const __be32 *reg; int id = -1; np = of_get_cpu_node(cpu, NULL); @@ -591,7 +591,7 @@ int cpu_to_core_id(int cpu) if (!reg) goto out; - id = *reg; + id = be32_to_cpup(reg); out: of_node_put(np); return id; -- cgit v0.10.2 From ca5de4e652ea09c0c18ebbd12dd4c2149271245a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:37 +1100 Subject: powerpc/pseries: Fix endian issues in /proc/ppc64/lparcfg Some obvious issues: cat /proc/ppc64/lparcfg ... partition_id=16777216 ... partition_potential_processors=268435456 Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c index e738007..c9fecf0 100644 --- a/arch/powerpc/platforms/pseries/lparcfg.c +++ b/arch/powerpc/platforms/pseries/lparcfg.c @@ -157,7 +157,7 @@ static void parse_ppp_data(struct seq_file *m) { struct hvcall_ppp_data ppp_data; struct device_node *root; - const int *perf_level; + const __be32 *perf_level; int rc; rc = h_get_ppp(&ppp_data); @@ -201,7 +201,7 @@ static void parse_ppp_data(struct seq_file *m) perf_level = of_get_property(root, "ibm,partition-performance-parameters-level", NULL); - if (perf_level && (*perf_level >= 1)) { + if (perf_level && (be32_to_cpup(perf_level) >= 1)) { seq_printf(m, "physical_procs_allocated_to_virtualization=%d\n", ppp_data.phys_platform_procs); @@ -435,7 +435,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) int partition_potential_processors; int partition_active_processors; struct device_node *rtas_node; - const int *lrdrp = NULL; + const __be32 *lrdrp = NULL; rtas_node = of_find_node_by_path("/rtas"); if (rtas_node) @@ -444,7 +444,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) if (lrdrp == NULL) { partition_potential_processors = vdso_data->processorCount; } else { - partition_potential_processors = *(lrdrp + 4); + partition_potential_processors = be32_to_cpup(lrdrp + 4); } of_node_put(rtas_node); @@ -654,7 +654,7 @@ static int lparcfg_data(struct seq_file *m, void *v) const char *model = ""; const char *system_id = ""; const char *tmp; - const unsigned int *lp_index_ptr; + const __be32 *lp_index_ptr; unsigned int lp_index = 0; seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS); @@ -670,7 +670,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lp_index_ptr = of_get_property(rootdn, "ibm,partition-no", NULL); if (lp_index_ptr) - lp_index = *lp_index_ptr; + lp_index = be32_to_cpup(lp_index_ptr); of_node_put(rootdn); } seq_printf(m, "serial_number=%s\n", system_id); -- cgit v0.10.2 From 9fa2984d1b5d9736a88c813ae89c160a2f9d5308 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:38 +1100 Subject: powerpc/pseries: Fix endian issues in nvram code The NVRAM code has a number of endian issues. I noticed a very confused error log count: RTAS: 100663330 -------- RTAS event begin -------- 100663330 == 0x06000022. 0x6 LE error logs and 0x22 BE error logs. The pstore code has similar issues - if we write an oops in one endian and attempt to read it in another we get junk. Make both of these formats big endian, and byteswap as required. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 7bfaf58..d7096f2 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -43,8 +43,8 @@ static char nvram_buf[NVRW_CNT]; /* assume this is in the first 4GB */ static DEFINE_SPINLOCK(nvram_lock); struct err_log_info { - int error_type; - unsigned int seq_num; + __be32 error_type; + __be32 seq_num; }; struct nvram_os_partition { @@ -79,9 +79,9 @@ static const char *pseries_nvram_os_partitions[] = { }; struct oops_log_info { - u16 version; - u16 report_length; - u64 timestamp; + __be16 version; + __be16 report_length; + __be64 timestamp; } __attribute__((packed)); static void oops_to_nvram(struct kmsg_dumper *dumper, @@ -291,8 +291,8 @@ int nvram_write_os_partition(struct nvram_os_partition *part, char * buff, length = part->size; } - info.error_type = err_type; - info.seq_num = error_log_cnt; + info.error_type = cpu_to_be32(err_type); + info.seq_num = cpu_to_be32(error_log_cnt); tmp_index = part->index; @@ -364,8 +364,8 @@ int nvram_read_partition(struct nvram_os_partition *part, char *buff, } if (part->os_partition) { - *error_log_cnt = info.seq_num; - *err_type = info.error_type; + *error_log_cnt = be32_to_cpu(info.seq_num); + *err_type = be32_to_cpu(info.error_type); } return 0; @@ -529,9 +529,9 @@ static int zip_oops(size_t text_len) pr_err("nvram: logging uncompressed oops/panic report\n"); return -1; } - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) zipped_len; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(zipped_len); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); return 0; } @@ -574,9 +574,9 @@ static int nvram_pstore_write(enum pstore_type_id type, clobbering_unread_rtas_event()) return -1; - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) size; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(size); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); if (compressed) err_type = ERR_TYPE_KERNEL_PANIC_GZ; @@ -670,16 +670,16 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type, size_t length, hdr_size; oops_hdr = (struct oops_log_info *)buff; - if (oops_hdr->version < OOPS_HDR_VERSION) { + if (be16_to_cpu(oops_hdr->version) < OOPS_HDR_VERSION) { /* Old format oops header had 2-byte record size */ hdr_size = sizeof(u16); - length = oops_hdr->version; + length = be16_to_cpu(oops_hdr->version); time->tv_sec = 0; time->tv_nsec = 0; } else { hdr_size = sizeof(*oops_hdr); - length = oops_hdr->report_length; - time->tv_sec = oops_hdr->timestamp; + length = be16_to_cpu(oops_hdr->report_length); + time->tv_sec = be64_to_cpu(oops_hdr->timestamp); time->tv_nsec = 0; } *buf = kmalloc(length, GFP_KERNEL); @@ -889,13 +889,13 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, kmsg_dump_get_buffer(dumper, false, oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) text_len; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(text_len); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); } (void) nvram_write_os_partition(&oops_log_partition, oops_buf, - (int) (sizeof(*oops_hdr) + oops_hdr->report_length), err_type, + (int) (sizeof(*oops_hdr) + text_len), err_type, ++oops_count); spin_unlock_irqrestore(&lock, flags); -- cgit v0.10.2 From 5091f0c969d2d0639db2efddce7352e7c48069ba Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:39 +1100 Subject: powerpc/pseries: Fix PCIE link speed endian issue We need to byteswap ibm,pcie-link-speed-stats. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 5f93856..70670a2 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -113,7 +113,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) { struct device_node *dn, *pdn; struct pci_bus *bus; - const uint32_t *pcie_link_speed_stats; + const __be32 *pcie_link_speed_stats; bus = bridge->bus; @@ -122,7 +122,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) { - pcie_link_speed_stats = (const uint32_t *) of_get_property(pdn, + pcie_link_speed_stats = of_get_property(pdn, "ibm,pcie-link-speed-stats", NULL); if (pcie_link_speed_stats) break; @@ -135,7 +135,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; } - switch (pcie_link_speed_stats[0]) { + switch (be32_to_cpup(pcie_link_speed_stats)) { case 0x01: bus->max_bus_speed = PCIE_SPEED_2_5GT; break; @@ -147,7 +147,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) break; } - switch (pcie_link_speed_stats[1]) { + switch (be32_to_cpup(pcie_link_speed_stats)) { case 0x01: bus->cur_bus_speed = PCIE_SPEED_2_5GT; break; -- cgit v0.10.2 From 8d15315537578a9ef5d35912d06127205dd82be8 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:40 +1100 Subject: powerpc/pseries: Fix endian issues in MSI code The MSI code is miscalculating quotas in little endian mode. Add required byteswaps to fix this. Before we claimed a quota of 65536, after the patch we see the correct value of 256. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 6d2f0ab..0c882e8 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -130,7 +130,8 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) { struct device_node *dn; struct pci_dn *pdn; - const u32 *req_msi; + const __be32 *p; + u32 req_msi; pdn = pci_get_pdn(pdev); if (!pdn) @@ -138,19 +139,20 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) dn = pdn->node; - req_msi = of_get_property(dn, prop_name, NULL); - if (!req_msi) { + p = of_get_property(dn, prop_name, NULL); + if (!p) { pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name); return -ENOENT; } - if (*req_msi < nvec) { + req_msi = be32_to_cpup(p); + if (req_msi < nvec) { pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); - if (*req_msi == 0) /* Be paranoid */ + if (req_msi == 0) /* Be paranoid */ return -ENOSPC; - return *req_msi; + return req_msi; } return 0; @@ -171,7 +173,7 @@ static int check_req_msix(struct pci_dev *pdev, int nvec) static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) { struct device_node *dn; - const u32 *p; + const __be32 *p; dn = of_node_get(pci_device_to_OF_node(dev)); while (dn) { @@ -179,7 +181,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) if (p) { pr_debug("rtas_msi: found prop on dn %s\n", dn->full_name); - *total = *p; + *total = be32_to_cpup(p); return dn; } @@ -232,13 +234,13 @@ struct msi_counts { static void *count_non_bridge_devices(struct device_node *dn, void *data) { struct msi_counts *counts = data; - const u32 *p; + const __be32 *p; u32 class; pr_debug("rtas_msi: counting %s\n", dn->full_name); p = of_get_property(dn, "class-code", NULL); - class = p ? *p : 0; + class = p ? be32_to_cpup(p) : 0; if ((class >> 8) != PCI_CLASS_BRIDGE_PCI) counts->num_devices++; @@ -249,7 +251,7 @@ static void *count_non_bridge_devices(struct device_node *dn, void *data) static void *count_spare_msis(struct device_node *dn, void *data) { struct msi_counts *counts = data; - const u32 *p; + const __be32 *p; int req; if (dn == counts->requestor) @@ -260,11 +262,11 @@ static void *count_spare_msis(struct device_node *dn, void *data) req = 0; p = of_get_property(dn, "ibm,req#msi", NULL); if (p) - req = *p; + req = be32_to_cpup(p); p = of_get_property(dn, "ibm,req#msi-x", NULL); if (p) - req = max(req, (int)*p); + req = max(req, (int)be32_to_cpup(p)); } if (req < counts->quota) -- cgit v0.10.2 From a29e30efa3a1b253fd1252731aa774a3544c5c3b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:41 +1100 Subject: powerpc: Fix endian issues in crash dump code A couple more device tree properties that need byte swapping. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 779a78c..11c1d06 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -124,15 +124,15 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, void crash_free_reserved_phys_range(unsigned long begin, unsigned long end) { unsigned long addr; - const u32 *basep, *sizep; + const __be32 *basep, *sizep; unsigned int rtas_start = 0, rtas_end = 0; basep = of_get_property(rtas.dev, "linux,rtas-base", NULL); sizep = of_get_property(rtas.dev, "rtas-size", NULL); if (basep && sizep) { - rtas_start = *basep; - rtas_end = *basep + *sizep; + rtas_start = be32_to_cpup(basep); + rtas_end = rtas_start + be32_to_cpup(sizep); } for (addr = begin; addr < end; addr += PAGE_SIZE) { -- cgit v0.10.2 From 01a9dbccbdfc7a93950b791405e476c510f73ab0 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 13 Dec 2013 15:53:43 +1100 Subject: powerpc/powernv: Fix endian issue in opal_xscom_read opal_xscom_read uses a pointer to return the data so we need to byteswap it on LE builds. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 033c06b..522f50c 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -720,7 +720,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe, int64_t opal_pci_poll(uint64_t phb_id); int64_t opal_return_cpu(void); -int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val); +int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val); int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 4d99a8f..4fbf276 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -96,9 +96,11 @@ static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) { struct opal_scom_map *m = map; int64_t rc; + __be64 v; reg = opal_scom_unmangle(reg); - rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value)); + rc = opal_xscom_read(m->chip, m->addr + reg, (__be64 *)__pa(&v)); + *value = be64_to_cpu(v); return opal_xscom_err_xlate(rc); } -- cgit v0.10.2 From 803c2d2f84da9dc2619449994af34d27148ab20d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 13 Dec 2013 15:56:06 +1100 Subject: powerpc/powernv: Fix OPAL LPC access in Little Endian We are passing pointers to the firmware for reads, we need to properly convert the result as OPAL is always BE. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 522f50c..7bdcf34 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -726,7 +726,7 @@ int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, uint32_t data, uint32_t sz); int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type, - uint32_t addr, uint32_t *data, uint32_t sz); + uint32_t addr, __be32 *data, uint32_t sz); int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); int64_t opal_manage_flash(uint8_t op); int64_t opal_update_flash(uint64_t blk_list); diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index e7e59e4..79d83ca 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -24,25 +24,25 @@ static int opal_lpc_chip_id = -1; static u8 opal_lpc_inb(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xffff) return 0xff; rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 1); - return rc ? 0xff : data; + return rc ? 0xff : be32_to_cpu(data); } static __le16 __opal_lpc_inw(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xfffe) return 0xffff; if (port & 1) return (__le16)opal_lpc_inb(port) << 8 | opal_lpc_inb(port + 1); rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 2); - return rc ? 0xffff : data; + return rc ? 0xffff : be32_to_cpu(data); } static u16 opal_lpc_inw(unsigned long port) { @@ -52,7 +52,7 @@ static u16 opal_lpc_inw(unsigned long port) static __le32 __opal_lpc_inl(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xfffc) return 0xffffffff; @@ -62,7 +62,7 @@ static __le32 __opal_lpc_inl(unsigned long port) (__le32)opal_lpc_inb(port + 2) << 8 | opal_lpc_inb(port + 3); rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 4); - return rc ? 0xffffffff : data; + return rc ? 0xffffffff : be32_to_cpu(data); } static u32 opal_lpc_inl(unsigned long port) -- cgit v0.10.2 From 86b58d13134ef14f09f8c8f37797ccc37cf823a3 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 5 Dec 2013 12:38:59 +0800 Subject: ceph: initialize inode before instantiating dentry commit b18825a7c8 (Put a small type field into struct dentry::d_flags) put a type field into struct dentry::d_flags. __d_instantiate() set the field by checking inode->i_mode. So we should initialize inode before instantiating dentry when handling mds reply. Fixes: http://tracker.ceph.com/issues/6930 Signed-off-by: Yan, Zheng Reviewed-by: Sage Weil diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 9a8e396..278fd28 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -978,7 +978,6 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, struct ceph_mds_reply_inode *ininfo; struct ceph_vino vino; struct ceph_fs_client *fsc = ceph_sb_to_client(sb); - int i = 0; int err = 0; dout("fill_trace %p is_dentry %d is_target %d\n", req, @@ -1039,6 +1038,29 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, } } + if (rinfo->head->is_target) { + vino.ino = le64_to_cpu(rinfo->targeti.in->ino); + vino.snap = le64_to_cpu(rinfo->targeti.in->snapid); + + in = ceph_get_inode(sb, vino); + if (IS_ERR(in)) { + err = PTR_ERR(in); + goto done; + } + req->r_target_inode = in; + + err = fill_inode(in, &rinfo->targeti, NULL, + session, req->r_request_started, + (le32_to_cpu(rinfo->head->result) == 0) ? + req->r_fmode : -1, + &req->r_caps_reservation); + if (err < 0) { + pr_err("fill_inode badness %p %llx.%llx\n", + in, ceph_vinop(in)); + goto done; + } + } + /* * ignore null lease/binding on snapdir ENOENT, or else we * will have trouble splicing in the virtual snapdir later @@ -1108,7 +1130,6 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, ceph_dentry(req->r_old_dentry)->offset); dn = req->r_old_dentry; /* use old_dentry */ - in = dn->d_inode; } /* null dentry? */ @@ -1130,44 +1151,28 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, } /* attach proper inode */ - ininfo = rinfo->targeti.in; - vino.ino = le64_to_cpu(ininfo->ino); - vino.snap = le64_to_cpu(ininfo->snapid); - in = dn->d_inode; - if (!in) { - in = ceph_get_inode(sb, vino); - if (IS_ERR(in)) { - pr_err("fill_trace bad get_inode " - "%llx.%llx\n", vino.ino, vino.snap); - err = PTR_ERR(in); - d_drop(dn); - goto done; - } + if (!dn->d_inode) { + ihold(in); dn = splice_dentry(dn, in, &have_lease, true); if (IS_ERR(dn)) { err = PTR_ERR(dn); goto done; } req->r_dentry = dn; /* may have spliced */ - ihold(in); - } else if (ceph_ino(in) == vino.ino && - ceph_snap(in) == vino.snap) { - ihold(in); - } else { + } else if (dn->d_inode && dn->d_inode != in) { dout(" %p links to %p %llx.%llx, not %llx.%llx\n", - dn, in, ceph_ino(in), ceph_snap(in), - vino.ino, vino.snap); + dn, dn->d_inode, ceph_vinop(dn->d_inode), + ceph_vinop(in)); have_lease = false; - in = NULL; } if (have_lease) update_dentry_lease(dn, rinfo->dlease, session, req->r_request_started); dout(" final dn %p\n", dn); - i++; - } else if ((req->r_op == CEPH_MDS_OP_LOOKUPSNAP || - req->r_op == CEPH_MDS_OP_MKSNAP) && !req->r_aborted) { + } else if (!req->r_aborted && + (req->r_op == CEPH_MDS_OP_LOOKUPSNAP || + req->r_op == CEPH_MDS_OP_MKSNAP)) { struct dentry *dn = req->r_dentry; /* fill out a snapdir LOOKUPSNAP dentry */ @@ -1177,52 +1182,15 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, ininfo = rinfo->targeti.in; vino.ino = le64_to_cpu(ininfo->ino); vino.snap = le64_to_cpu(ininfo->snapid); - in = ceph_get_inode(sb, vino); - if (IS_ERR(in)) { - pr_err("fill_inode get_inode badness %llx.%llx\n", - vino.ino, vino.snap); - err = PTR_ERR(in); - d_delete(dn); - goto done; - } dout(" linking snapped dir %p to dn %p\n", in, dn); + ihold(in); dn = splice_dentry(dn, in, NULL, true); if (IS_ERR(dn)) { err = PTR_ERR(dn); goto done; } req->r_dentry = dn; /* may have spliced */ - ihold(in); - rinfo->head->is_dentry = 1; /* fool notrace handlers */ - } - - if (rinfo->head->is_target) { - vino.ino = le64_to_cpu(rinfo->targeti.in->ino); - vino.snap = le64_to_cpu(rinfo->targeti.in->snapid); - - if (in == NULL || ceph_ino(in) != vino.ino || - ceph_snap(in) != vino.snap) { - in = ceph_get_inode(sb, vino); - if (IS_ERR(in)) { - err = PTR_ERR(in); - goto done; - } - } - req->r_target_inode = in; - - err = fill_inode(in, - &rinfo->targeti, NULL, - session, req->r_request_started, - (le32_to_cpu(rinfo->head->result) == 0) ? - req->r_fmode : -1, - &req->r_caps_reservation); - if (err < 0) { - pr_err("fill_inode badness %p %llx.%llx\n", - in, ceph_vinop(in)); - goto done; - } } - done: dout("fill_trace done err=%d\n", err); return err; @@ -1272,7 +1240,7 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req, struct qstr dname; struct dentry *dn; struct inode *in; - int err = 0, i; + int err = 0, ret, i; struct inode *snapdir = NULL; struct ceph_mds_request_head *rhead = req->r_request->front.iov_base; struct ceph_dentry_info *di; @@ -1305,6 +1273,7 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req, ceph_fill_dirfrag(parent->d_inode, rinfo->dir_dir); } + /* FIXME: release caps/leases if error occurs */ for (i = 0; i < rinfo->dir_nr; i++) { struct ceph_vino vino; @@ -1329,9 +1298,10 @@ retry_lookup: err = -ENOMEM; goto out; } - err = ceph_init_dentry(dn); - if (err < 0) { + ret = ceph_init_dentry(dn); + if (ret < 0) { dput(dn); + err = ret; goto out; } } else if (dn->d_inode && @@ -1351,9 +1321,6 @@ retry_lookup: spin_unlock(&parent->d_lock); } - di = dn->d_fsdata; - di->offset = ceph_make_fpos(frag, i + r_readdir_offset); - /* inode */ if (dn->d_inode) { in = dn->d_inode; @@ -1366,26 +1333,39 @@ retry_lookup: err = PTR_ERR(in); goto out; } - dn = splice_dentry(dn, in, NULL, false); - if (IS_ERR(dn)) - dn = NULL; } if (fill_inode(in, &rinfo->dir_in[i], NULL, session, req->r_request_started, -1, &req->r_caps_reservation) < 0) { pr_err("fill_inode badness on %p\n", in); + if (!dn->d_inode) + iput(in); + d_drop(dn); goto next_item; } - if (dn) - update_dentry_lease(dn, rinfo->dir_dlease[i], - req->r_session, - req->r_request_started); + + if (!dn->d_inode) { + dn = splice_dentry(dn, in, NULL, false); + if (IS_ERR(dn)) { + err = PTR_ERR(dn); + dn = NULL; + goto next_item; + } + } + + di = dn->d_fsdata; + di->offset = ceph_make_fpos(frag, i + r_readdir_offset); + + update_dentry_lease(dn, rinfo->dir_dlease[i], + req->r_session, + req->r_request_started); next_item: if (dn) dput(dn); } - req->r_did_prepopulate = true; + if (err == 0) + req->r_did_prepopulate = true; out: if (snapdir) { -- cgit v0.10.2 From 56f91aad69444d650237295f68c195b74d888d95 Mon Sep 17 00:00:00 2001 From: Li Wang Date: Wed, 13 Nov 2013 15:22:14 +0800 Subject: ceph: Avoid data inconsistency due to d-cache aliasing in readpage() If the length of data to be read in readpage() is exactly PAGE_CACHE_SIZE, the original code does not flush d-cache for data consistency after finishing reading. This patches fixes this. Signed-off-by: Li Wang Signed-off-by: Sage Weil diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 1e561c0..ec3ba43 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -210,9 +210,13 @@ static int readpage_nounlock(struct file *filp, struct page *page) if (err < 0) { SetPageError(page); goto out; - } else if (err < PAGE_CACHE_SIZE) { + } else { + if (err < PAGE_CACHE_SIZE) { /* zero fill remainder of page */ - zero_user_segment(page, err, PAGE_CACHE_SIZE); + zero_user_segment(page, err, PAGE_CACHE_SIZE); + } else { + flush_dcache_page(page); + } } SetPageUptodate(page); -- cgit v0.10.2 From 5b564d80f8bc21094c0cd2b19b679d983aabcc29 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 13 Dec 2013 12:31:08 +0000 Subject: dm space map: disallow decrementing a reference count below zero The old behaviour, returning -EINVAL if a ref_count of 0 would be decremented, was removed in commit f722063 ("dm space map: optimise sm_ll_dec and sm_ll_inc"). To fix this regression we return an error code from the mutator function pointer passed to sm_ll_mutate() and have dec_ref_count() return -EINVAL if the old ref_count is 0. Add a DMERR to reflect the potential seriousness of this error. Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path. With this fix the following dmts regression test now passes: dmtest run --suite cache -n /metadata_use_kernel/ The next patch fixes the higher-level dm-array code that exposed this regression. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.12+ diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c index 6058569..466a60b 100644 --- a/drivers/md/persistent-data/dm-space-map-common.c +++ b/drivers/md/persistent-data/dm-space-map-common.c @@ -381,7 +381,7 @@ int sm_ll_find_free_block(struct ll_disk *ll, dm_block_t begin, } static int sm_ll_mutate(struct ll_disk *ll, dm_block_t b, - uint32_t (*mutator)(void *context, uint32_t old), + int (*mutator)(void *context, uint32_t old, uint32_t *new), void *context, enum allocation_event *ev) { int r; @@ -410,11 +410,17 @@ static int sm_ll_mutate(struct ll_disk *ll, dm_block_t b, if (old > 2) { r = sm_ll_lookup_big_ref_count(ll, b, &old); - if (r < 0) + if (r < 0) { + dm_tm_unlock(ll->tm, nb); return r; + } } - ref_count = mutator(context, old); + r = mutator(context, old, &ref_count); + if (r) { + dm_tm_unlock(ll->tm, nb); + return r; + } if (ref_count <= 2) { sm_set_bitmap(bm_le, bit, ref_count); @@ -465,9 +471,10 @@ static int sm_ll_mutate(struct ll_disk *ll, dm_block_t b, return ll->save_ie(ll, index, &ie_disk); } -static uint32_t set_ref_count(void *context, uint32_t old) +static int set_ref_count(void *context, uint32_t old, uint32_t *new) { - return *((uint32_t *) context); + *new = *((uint32_t *) context); + return 0; } int sm_ll_insert(struct ll_disk *ll, dm_block_t b, @@ -476,9 +483,10 @@ int sm_ll_insert(struct ll_disk *ll, dm_block_t b, return sm_ll_mutate(ll, b, set_ref_count, &ref_count, ev); } -static uint32_t inc_ref_count(void *context, uint32_t old) +static int inc_ref_count(void *context, uint32_t old, uint32_t *new) { - return old + 1; + *new = old + 1; + return 0; } int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev) @@ -486,9 +494,15 @@ int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev) return sm_ll_mutate(ll, b, inc_ref_count, NULL, ev); } -static uint32_t dec_ref_count(void *context, uint32_t old) +static int dec_ref_count(void *context, uint32_t old, uint32_t *new) { - return old - 1; + if (!old) { + DMERR_LIMIT("unable to decrement a reference count below 0"); + return -EINVAL; + } + + *new = old - 1; + return 0; } int sm_ll_dec(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev) -- cgit v0.10.2 From ed9571f0cf1fe09d3506302610f3ccdfa1d22c4a Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 13 Dec 2013 14:55:55 +0000 Subject: dm array: fix a reference counting bug in shadow_ablock An old array block could have its reference count decremented below zero when it is being replaced in the btree by a new array block. The fix is to increment the old ablock's reference count just before inserting a new ablock into the btree. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.9+ diff --git a/drivers/md/persistent-data/dm-array.c b/drivers/md/persistent-data/dm-array.c index af96e24..1d75b1d 100644 --- a/drivers/md/persistent-data/dm-array.c +++ b/drivers/md/persistent-data/dm-array.c @@ -317,8 +317,16 @@ static int shadow_ablock(struct dm_array_info *info, dm_block_t *root, * The shadow op will often be a noop. Only insert if it really * copied data. */ - if (dm_block_location(*block) != b) + if (dm_block_location(*block) != b) { + /* + * dm_tm_shadow_block will have already decremented the old + * block, but it is still referenced by the btree. We + * increment to stop the insert decrementing it below zero + * when overwriting the old value. + */ + dm_tm_inc(info->btree_info.tm, b); r = insert_ablock(info, index, *block, root); + } return r; } -- cgit v0.10.2 From b713aa0b15015a65ad5421543b80df86de043d62 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Dec 2013 19:21:08 +0000 Subject: ARM: fix asm/memory.h build error Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is not defined: In file included from arch/arm/include/asm/page.h:163:0, from include/linux/mm_types.h:16, from include/linux/sched.h:24, from arch/arm/kernel/asm-offsets.c:13: arch/arm/include/asm/memory.h: In function '__virt_to_phys': arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function) arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in arch/arm/include/asm/memory.h: In function '__phys_to_virt': arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function) Fixes: ca5a45c06cd4 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions") Tested-By: Jason Gunthorpe Signed-off-by: Russell King diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 9ecccc8..6976b03 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -100,23 +100,19 @@ #define TASK_UNMAPPED_BASE UL(0x00000000) #endif -#ifndef PHYS_OFFSET -#define PHYS_OFFSET UL(CONFIG_DRAM_BASE) -#endif - #ifndef END_MEM #define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE) #endif #ifndef PAGE_OFFSET -#define PAGE_OFFSET (PHYS_OFFSET) +#define PAGE_OFFSET PLAT_PHYS_OFFSET #endif /* * The module can be at any place in ram in nommu mode. */ #define MODULES_END (END_MEM) -#define MODULES_VADDR (PHYS_OFFSET) +#define MODULES_VADDR PAGE_OFFSET #define XIP_VIRT_ADDR(physaddr) (physaddr) @@ -157,6 +153,16 @@ #endif #define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1) +/* + * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical + * memory. This is used for XIP and NoMMU kernels, or by kernels which + * have their own mach/memory.h. Assembly code must always use + * PLAT_PHYS_OFFSET and not PHYS_OFFSET. + */ +#ifndef PLAT_PHYS_OFFSET +#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#endif + #ifndef __ASSEMBLY__ /* @@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x) #else +#define PHYS_OFFSET PLAT_PHYS_OFFSET + static inline phys_addr_t __virt_to_phys(unsigned long x) { return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET; @@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x) #endif #endif -#endif /* __ASSEMBLY__ */ - -#ifndef PHYS_OFFSET -#ifdef PLAT_PHYS_OFFSET -#define PHYS_OFFSET PLAT_PHYS_OFFSET -#else -#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) -#endif -#endif - -#ifndef __ASSEMBLY__ /* * PFNs are used to describe any physical page; this means diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 14235ba..716249c 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -68,7 +68,7 @@ ENTRY(stext) #ifdef CONFIG_ARM_MPU /* Calculate the size of a region covering just the kernel */ - ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET + ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET ldr r6, =(_end) @ Cover whole kernel sub r6, r6, r5 @ Minimum size of region to map clz r6, r6 @ Region size must be 2^N... @@ -213,7 +213,7 @@ ENTRY(__setup_mpu) set_region_nr r0, #MPU_RAM_REGION isb /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ - ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET + ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 11d59b3..32f317e 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -110,7 +110,7 @@ ENTRY(stext) sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) add r8, r8, r4 @ PHYS_OFFSET #else - ldr r8, =PHYS_OFFSET @ always constant in this case + ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case #endif /* -- cgit v0.10.2 From 3c325ced6aefa72d43a54e324df7562564c26f91 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Sat, 14 Dec 2013 03:26:45 -0800 Subject: i40e: fix null dereference If the vsi->tx_rings structure is NULL we don't want to panic. Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10 Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index be15938..12b0932 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -354,6 +354,9 @@ static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct( struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi); int i; + if (!vsi->tx_rings) + return stats; + rcu_read_lock(); for (i = 0; i < vsi->num_queue_pairs; i++) { struct i40e_ring *tx_ring, *rx_ring; -- cgit v0.10.2 From df29df92adda751ac04ca5149d30014b5199db81 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Sat, 14 Dec 2013 03:26:46 -0800 Subject: igb: Fix for issue where values could be too high for udelay function. This patch changes the igb_phy_has_link function to check the value of the parameter before deciding to use udelay or mdelay in order to be sure that the value is not too high for udelay function. CC: stable kernel # 3.9+ Signed-off-by: Sunil K Pandey Signed-off-by: Kevin B Smith Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index c4c4fe3..ad2b74d 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1728,7 +1728,10 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ - udelay(usec_interval); + if (usec_interval >= 1000) + mdelay(usec_interval/1000); + else + udelay(usec_interval); } ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); if (ret_val) -- cgit v0.10.2 From 29b1deb2a48a9dd02b93597aa4c055a24c0e989f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 15 Dec 2013 11:17:45 -0800 Subject: Revert "selinux: consider filesystem subtype in policies" This reverts commit 102aefdda4d8275ce7d7100bc16c88c74272b260. Tom London reports that it causes sync() to hang on Fedora rawhide: https://bugzilla.redhat.com/show_bug.cgi?id=1033965 and Josh Boyer bisected it down to this commit. Reverting the commit in the rawhide kernel fixes the problem. Eric Paris root-caused it to incorrect subtype matching in that commit breaking fuse, and has a tentative patch, but by now we're better off retrying this in 3.14 rather than playing with it any more. Reported-by: Tom London Bisected-by: Josh Boyer Acked-by: Eric Paris Cc: James Morris Cc: Anand Avati Cc: Paul Moore Signed-off-by: Linus Torvalds diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 794c3ca..98b1caa 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -95,10 +95,6 @@ #include "audit.h" #include "avc_ss.h" -#define SB_TYPE_FMT "%s%s%s" -#define SB_SUBTYPE(sb) (sb->s_subtype && sb->s_subtype[0]) -#define SB_TYPE_ARGS(sb) sb->s_type->name, SB_SUBTYPE(sb) ? "." : "", SB_SUBTYPE(sb) ? sb->s_subtype : "" - extern struct security_operations *security_ops; /* SECMARK reference count */ @@ -413,8 +409,8 @@ static int sb_finish_set_opts(struct super_block *sb) the first boot of the SELinux kernel before we have assigned xattr values to the filesystem. */ if (!root_inode->i_op->getxattr) { - printk(KERN_WARNING "SELinux: (dev %s, type "SB_TYPE_FMT") has no " - "xattr support\n", sb->s_id, SB_TYPE_ARGS(sb)); + printk(KERN_WARNING "SELinux: (dev %s, type %s) has no " + "xattr support\n", sb->s_id, sb->s_type->name); rc = -EOPNOTSUPP; goto out; } @@ -422,22 +418,22 @@ static int sb_finish_set_opts(struct super_block *sb) if (rc < 0 && rc != -ENODATA) { if (rc == -EOPNOTSUPP) printk(KERN_WARNING "SELinux: (dev %s, type " - SB_TYPE_FMT") has no security xattr handler\n", - sb->s_id, SB_TYPE_ARGS(sb)); + "%s) has no security xattr handler\n", + sb->s_id, sb->s_type->name); else printk(KERN_WARNING "SELinux: (dev %s, type " - SB_TYPE_FMT") getxattr errno %d\n", sb->s_id, - SB_TYPE_ARGS(sb), -rc); + "%s) getxattr errno %d\n", sb->s_id, + sb->s_type->name, -rc); goto out; } } if (sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) - printk(KERN_ERR "SELinux: initialized (dev %s, type "SB_TYPE_FMT"), unknown behavior\n", - sb->s_id, SB_TYPE_ARGS(sb)); + printk(KERN_ERR "SELinux: initialized (dev %s, type %s), unknown behavior\n", + sb->s_id, sb->s_type->name); else - printk(KERN_DEBUG "SELinux: initialized (dev %s, type "SB_TYPE_FMT"), %s\n", - sb->s_id, SB_TYPE_ARGS(sb), + printk(KERN_DEBUG "SELinux: initialized (dev %s, type %s), %s\n", + sb->s_id, sb->s_type->name, labeling_behaviors[sbsec->behavior-1]); sbsec->flags |= SE_SBINITIALIZED; @@ -600,6 +596,7 @@ static int selinux_set_mnt_opts(struct super_block *sb, const struct cred *cred = current_cred(); int rc = 0, i; struct superblock_security_struct *sbsec = sb->s_security; + const char *name = sb->s_type->name; struct inode *inode = sbsec->sb->s_root->d_inode; struct inode_security_struct *root_isec = inode->i_security; u32 fscontext_sid = 0, context_sid = 0, rootcontext_sid = 0; @@ -658,8 +655,8 @@ static int selinux_set_mnt_opts(struct super_block *sb, strlen(mount_options[i]), &sid); if (rc) { printk(KERN_WARNING "SELinux: security_context_to_sid" - "(%s) failed for (dev %s, type "SB_TYPE_FMT") errno=%d\n", - mount_options[i], sb->s_id, SB_TYPE_ARGS(sb), rc); + "(%s) failed for (dev %s, type %s) errno=%d\n", + mount_options[i], sb->s_id, name, rc); goto out; } switch (flags[i]) { @@ -806,8 +803,7 @@ out: out_double_mount: rc = -EINVAL; printk(KERN_WARNING "SELinux: mount invalid. Same superblock, different " - "security settings for (dev %s, type "SB_TYPE_FMT")\n", sb->s_id, - SB_TYPE_ARGS(sb)); + "security settings for (dev %s, type %s)\n", sb->s_id, name); goto out; } @@ -2480,8 +2476,8 @@ static int selinux_sb_remount(struct super_block *sb, void *data) rc = security_context_to_sid(mount_options[i], len, &sid); if (rc) { printk(KERN_WARNING "SELinux: security_context_to_sid" - "(%s) failed for (dev %s, type "SB_TYPE_FMT") errno=%d\n", - mount_options[i], sb->s_id, SB_TYPE_ARGS(sb), rc); + "(%s) failed for (dev %s, type %s) errno=%d\n", + mount_options[i], sb->s_id, sb->s_type->name, rc); goto out_free_opts; } rc = -EINVAL; @@ -2519,8 +2515,8 @@ out_free_secdata: return rc; out_bad_option: printk(KERN_WARNING "SELinux: unable to change security options " - "during remount (dev %s, type "SB_TYPE_FMT")\n", sb->s_id, - SB_TYPE_ARGS(sb)); + "during remount (dev %s, type=%s)\n", sb->s_id, + sb->s_type->name); goto out_free_opts; } diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index ee470a0..d106733 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2334,50 +2334,16 @@ int security_fs_use(struct super_block *sb) struct ocontext *c; struct superblock_security_struct *sbsec = sb->s_security; const char *fstype = sb->s_type->name; - const char *subtype = (sb->s_subtype && sb->s_subtype[0]) ? sb->s_subtype : NULL; - struct ocontext *base = NULL; read_lock(&policy_rwlock); - for (c = policydb.ocontexts[OCON_FSUSE]; c; c = c->next) { - char *sub; - int baselen; - - baselen = strlen(fstype); - - /* if base does not match, this is not the one */ - if (strncmp(fstype, c->u.name, baselen)) - continue; - - /* if there is no subtype, this is the one! */ - if (!subtype) - break; - - /* skip past the base in this entry */ - sub = c->u.name + baselen; - - /* entry is only a base. save it. keep looking for subtype */ - if (sub[0] == '\0') { - base = c; - continue; - } - - /* entry is not followed by a subtype, so it is not a match */ - if (sub[0] != '.') - continue; - - /* whew, we found a subtype of this fstype */ - sub++; /* move past '.' */ - - /* exact match of fstype AND subtype */ - if (!strcmp(subtype, sub)) + c = policydb.ocontexts[OCON_FSUSE]; + while (c) { + if (strcmp(fstype, c->u.name) == 0) break; + c = c->next; } - /* in case we had found an fstype match but no subtype match */ - if (!c) - c = base; - if (c) { sbsec->behavior = c->v.behavior; if (!c->sid[0]) { -- cgit v0.10.2 From e4158f1b1090d362a7c998bd654cc3fe8f5c863c Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Fri, 13 Dec 2013 02:25:57 +0300 Subject: radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() Since commit ec39f64bba34 ("drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups") radeon_hwmon_init() is using hwmon_device_register_with_groups(), which sets `rdev' as a device private driver_data, while hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'. Fix them by using dev_get_drvdata(), in order to avoid this oops: BUG: unable to handle kernel paging request at 0000000000001e28 IP: [] hwmon_attributes_visible+0x18/0x3d [radeon] PGD 15057e067 PUD 151a8e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Call Trace: internal_create_group+0x114/0x1d9 sysfs_create_group+0xe/0x10 sysfs_create_groups+0x22/0x5f device_add+0x34f/0x501 device_register+0x15/0x18 hwmon_device_register_with_groups+0xb5/0xed radeon_hwmon_init+0x56/0x7c [radeon] radeon_pm_init+0x134/0x7e5 [radeon] radeon_modeset_init+0x75f/0x8ed [radeon] radeon_driver_load_kms+0xc6/0x187 [radeon] drm_dev_register+0xf9/0x1b4 [drm] drm_get_pci_dev+0x98/0x129 [drm] radeon_pci_probe+0xa3/0xac [radeon] pci_device_probe+0x6e/0xcf driver_probe_device+0x98/0x1c4 __driver_attach+0x5c/0x7e bus_for_each_dev+0x7b/0x85 driver_attach+0x19/0x1b bus_add_driver+0x104/0x1ce driver_register+0x89/0xc5 __pci_register_driver+0x58/0x5b drm_pci_init+0x86/0xea [drm] radeon_init+0x97/0x1000 [radeon] do_one_initcall+0x7f/0x117 load_module+0x1583/0x1bb4 SyS_init_module+0xa0/0xaf Signed-off-by: Sergey Senozhatsky Cc: Borislav Petkov Cc: Alexander Deucher Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index dc75bb6..984097b 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -552,8 +552,7 @@ static ssize_t radeon_hwmon_show_temp_thresh(struct device *dev, struct device_attribute *attr, char *buf) { - struct drm_device *ddev = dev_get_drvdata(dev); - struct radeon_device *rdev = ddev->dev_private; + struct radeon_device *rdev = dev_get_drvdata(dev); int hyst = to_sensor_dev_attr(attr)->index; int temp; @@ -580,8 +579,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = container_of(kobj, struct device, kobj); - struct drm_device *ddev = dev_get_drvdata(dev); - struct radeon_device *rdev = ddev->dev_private; + struct radeon_device *rdev = dev_get_drvdata(dev); /* Skip limit attributes if DPM is not enabled */ if (rdev->pm.pm_method != PM_METHOD_DPM && -- cgit v0.10.2 From 57053d8c5c59562cac156513740c10b502a40968 Mon Sep 17 00:00:00 2001 From: Matias Bjorling Date: Tue, 10 Dec 2013 16:50:38 +0100 Subject: null_blk: mem garbage on NUMA systems during init For NUMA systems, initializing the blk-mq layer and using per node hctx. We initialize submit queues to 1, while blk-mq nr_hw_queues is initialized to the number of NUMA nodes. This makes the null_init_hctx function overwrite memory outside of what it allocated. In my case it lead to writing garbage into struct request_queue's mq_map. Signed-off-by: Matias Bjorling Cc: Jens Axboe Signed-off-by: Linus Torvalds diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c index ea192ec..f370fc1 100644 --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -495,23 +495,23 @@ static int null_add_dev(void) spin_lock_init(&nullb->lock); + if (queue_mode == NULL_Q_MQ && use_per_node_hctx) + submit_queues = nr_online_nodes; + if (setup_queues(nullb)) goto err; if (queue_mode == NULL_Q_MQ) { null_mq_reg.numa_node = home_node; null_mq_reg.queue_depth = hw_queue_depth; + null_mq_reg.nr_hw_queues = submit_queues; if (use_per_node_hctx) { null_mq_reg.ops->alloc_hctx = null_alloc_hctx; null_mq_reg.ops->free_hctx = null_free_hctx; - - null_mq_reg.nr_hw_queues = nr_online_nodes; } else { null_mq_reg.ops->alloc_hctx = blk_mq_alloc_single_hw_queue; null_mq_reg.ops->free_hctx = blk_mq_free_single_hw_queue; - - null_mq_reg.nr_hw_queues = submit_queues; } nullb->q = blk_mq_init_queue(&null_mq_reg, nullb); -- cgit v0.10.2 From 319e2e3f63c348a9b66db4667efa73178e18b17d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 15 Dec 2013 12:31:33 -0800 Subject: Linux 3.13-rc4 diff --git a/Makefile b/Makefile index 890392f..858a147 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 13 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* -- cgit v0.10.2 From b25b4427e9dfba073cf9bc86603956ed395eb6e3 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Wed, 11 Dec 2013 22:19:01 -0500 Subject: drm/nouveau: only runtime suspend by default in optimus configuration The intent was to only enable it by default for optimus, e.g. see the runtime_idle callback. The suspend callback may be called directly, e.g. as a result of nouveau_crtc_set_config. Reported-by: Stefan Lippers-Hollmann Signed-off-by: Ilia Mirkin Tested-by: Stefan Lippers-Hollmann Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 7a3759f..98a22e6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -858,6 +858,12 @@ static int nouveau_pmops_runtime_suspend(struct device *dev) if (nouveau_runtime_pm == 0) return -EINVAL; + /* are we optimus enabled? */ + if (nouveau_runtime_pm == -1 && !nouveau_is_optimus() && !nouveau_is_v1_dsm()) { + DRM_DEBUG_DRIVER("failing to power off - not optimus\n"); + return -EINVAL; + } + nv_debug_level(SILENT); drm_kms_helper_poll_disable(drm_dev); vga_switcheroo_set_dynamic_switch(pdev, VGA_SWITCHEROO_OFF); -- cgit v0.10.2 From 1b1ccee1e821e59c2a45c95b007aeb2c9dafd9be Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 11 Dec 2013 15:07:43 +0100 Subject: mfd: s2mps11: Fix build after regmap field rename in sec-core.c Fix building of s2mps11 regulator and clock drivers after renaming regmap field in struct sec_pmic_dev in commit: - "mfd/rtc: s5m: Fix register updating by adding regmap for RTC" Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Marek Szyprowski Signed-off-by: Mark Brown diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index 7be41e6..00a3abe 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -60,7 +60,7 @@ static int s2mps11_clk_prepare(struct clk_hw *hw) struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw); int ret; - ret = regmap_update_bits(s2mps11->iodev->regmap, + ret = regmap_update_bits(s2mps11->iodev->regmap_pmic, S2MPS11_REG_RTC_CTRL, s2mps11->mask, s2mps11->mask); if (!ret) @@ -74,7 +74,7 @@ static void s2mps11_clk_unprepare(struct clk_hw *hw) struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw); int ret; - ret = regmap_update_bits(s2mps11->iodev->regmap, S2MPS11_REG_RTC_CTRL, + ret = regmap_update_bits(s2mps11->iodev->regmap_pmic, S2MPS11_REG_RTC_CTRL, s2mps11->mask, ~s2mps11->mask); if (!ret) @@ -174,7 +174,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev) s2mps11_clk->hw.init = &s2mps11_clks_init[i]; s2mps11_clk->mask = 1 << i; - ret = regmap_read(s2mps11_clk->iodev->regmap, + ret = regmap_read(s2mps11_clk->iodev->regmap_pmic, S2MPS11_REG_RTC_CTRL, &val); if (ret < 0) goto err_reg; diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 333677d..9e61922 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -438,7 +438,7 @@ common_reg: platform_set_drvdata(pdev, s2mps11); config.dev = &pdev->dev; - config.regmap = iodev->regmap; + config.regmap = iodev->regmap_pmic; config.driver_data = s2mps11; for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) { if (!reg_np) { -- cgit v0.10.2 From d386735588c3e22129c2bc6eb64fc1d37a8f805c Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Sun, 8 Dec 2013 23:23:57 -0800 Subject: drm/ttm: Fix accesses through vmas with only partial coverage VMAs covering a bo but that didn't start at the same address space offset as the bo they were mapping were incorrectly generating SEGFAULT errors in the fault handler. Reported-by: Joseph Dolinak Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index b249ab9..6440eea 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -169,9 +169,9 @@ static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) } page_offset = ((address - vma->vm_start) >> PAGE_SHIFT) + - drm_vma_node_start(&bo->vma_node) - vma->vm_pgoff; - page_last = vma_pages(vma) + - drm_vma_node_start(&bo->vma_node) - vma->vm_pgoff; + vma->vm_pgoff - drm_vma_node_start(&bo->vma_node); + page_last = vma_pages(vma) + vma->vm_pgoff - + drm_vma_node_start(&bo->vma_node); if (unlikely(page_offset >= bo->num_pages)) { retval = VM_FAULT_SIGBUS; -- cgit v0.10.2 From 9bd7d20c45157c175bfd45449e904a404506f99c Mon Sep 17 00:00:00 2001 From: wangweidong Date: Fri, 13 Dec 2013 11:00:10 +0800 Subject: sctp: loading sctp when load sctp_probe when I modprobe sctp_probe, it failed with "FATAL: ". I found that sctp should load before sctp_probe register jprobe. So I add a sctp_setup_jprobe for loading 'sctp' when first failed to register jprobe, just do this similar to dccp_probe. v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil Signed-off-by: Wang Weidong Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/sctp/probe.c b/net/sctp/probe.c index 53c452e..5e68b94 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -38,6 +38,7 @@ #include #include +MODULE_SOFTDEP("pre: sctp"); MODULE_AUTHOR("Wei Yongjun "); MODULE_DESCRIPTION("SCTP snooper"); MODULE_LICENSE("GPL"); @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { .entry = jsctp_sf_eat_sack, }; +static __init int sctp_setup_jprobe(void) +{ + int ret = register_jprobe(&sctp_recv_probe); + + if (ret) { + if (request_module("sctp")) + goto out; + ret = register_jprobe(&sctp_recv_probe); + } + +out: + return ret; +} + static __init int sctpprobe_init(void) { int ret = -ENOMEM; @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) &sctpprobe_fops)) goto free_kfifo; - ret = register_jprobe(&sctp_recv_probe); + ret = sctp_setup_jprobe(); if (ret) goto remove_proc; -- cgit v0.10.2 From 49d45a31b71d7d9da74485922bdb63faf3dc9684 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 7 Dec 2013 13:22:42 +0100 Subject: drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebook MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This bug in EDID was exposed by: commit eccea7920cfb009c2fa40e9ecdce8c36f61cab66 Author: Alex Deucher Date: Mon Mar 26 15:12:54 2012 -0400 drm/radeon/kms: improve bpc handling (v2) Which resulted in kind of regression in 3.5. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=70934 Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 0a1e4a5..8835dcd 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -68,6 +68,8 @@ #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6) /* Force reduced-blanking timings for detailed modes */ #define EDID_QUIRK_FORCE_REDUCED_BLANKING (1 << 7) +/* Force 8bpc */ +#define EDID_QUIRK_FORCE_8BPC (1 << 8) struct detailed_mode_closure { struct drm_connector *connector; @@ -128,6 +130,9 @@ static struct edid_quirk { /* Medion MD 30217 PG */ { "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 }, + + /* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */ + { "SEC", 0xd033, EDID_QUIRK_FORCE_8BPC }, }; /* @@ -3435,6 +3440,9 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) drm_add_display_info(edid, &connector->display_info); + if (quirks & EDID_QUIRK_FORCE_8BPC) + connector->display_info.bpc = 8; + return num_modes; } EXPORT_SYMBOL(drm_add_edid_modes); -- cgit v0.10.2 From a1c31f1d057130cc63e72a09189410d169db7ecf Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 7 Dec 2013 03:10:35 +0400 Subject: can: ems_usb: fix urb leaks on failure paths There are a couple failure paths where urb leaks. Is spare code within ems_usb_start_xmit(), usb_free_urb() should be used to deallocate urb instead of usb_unanchor_urb(). In ems_usb_start() there is no usb_free_urb() if usb_submit_urb() fails. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Sebastian Haas Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 5f9a7ad..8aeec0b 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -625,6 +625,7 @@ static int ems_usb_start(struct ems_usb *dev) usb_unanchor_urb(urb); usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, urb->transfer_dma); + usb_free_urb(urb); break; } @@ -798,8 +799,8 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne * allowed (MAX_TX_URBS). */ if (!context) { - usb_unanchor_urb(urb); usb_free_coherent(dev->udev, size, buf, urb->transfer_dma); + usb_free_urb(urb); netdev_warn(netdev, "couldn't find free context\n"); -- cgit v0.10.2 From 20fb4eb96fb0350d28fc4d7cbfd5506711079592 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sat, 14 Dec 2013 14:36:25 +0100 Subject: can: peak_usb: fix mem leak in pcan_usb_pro_init() This patch fixes a memory leak in pcan_usb_pro_init(). In patch f14e224 net: can: peak_usb: Do not do dma on the stack the struct pcan_usb_pro_fwinfo *fi and struct pcan_usb_pro_blinfo *bi were converted from stack to dynamic allocation va kmalloc(). However the corresponding kfree() was not introduced. This patch adds the missing kfree(). Cc: linux-stable # v3.10 Reported-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 8ee9d15..263dd92 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -927,6 +927,9 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) /* set LED in default state (end of init phase) */ pcan_usb_pro_set_led(dev, 0, 1); + kfree(bi); + kfree(fi); + return 0; err_out: -- cgit v0.10.2 From f447ef4a56dee4b68a91460bcdfe06b5011085f2 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 11 Oct 2013 08:45:51 -0400 Subject: cpupower: Fix segfault due to incorrect getopt_long arugments If a user calls 'cpupower set --perf-bias 15', the process will end with a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi call. This is because the getopt_long structure currently has all of the options as having an optional_argument when they really have a required argument. We change the structure to use required_argument to match the short options and it resolves the issue. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439 Signed-off-by: Josh Boyer Cc: Dominik Brodowski Cc: Thomas Renninger Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c index dc4de37..bcf1d2f 100644 --- a/tools/power/cpupower/utils/cpupower-set.c +++ b/tools/power/cpupower/utils/cpupower-set.c @@ -18,9 +18,9 @@ #include "helpers/bitmask.h" static struct option set_opts[] = { - { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, - { .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'}, - { .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'}, + { .name = "perf-bias", .has_arg = required_argument, .flag = NULL, .val = 'b'}, + { .name = "sched-mc", .has_arg = required_argument, .flag = NULL, .val = 'm'}, + { .name = "sched-smt", .has_arg = required_argument, .flag = NULL, .val = 's'}, { }, }; -- cgit v0.10.2 From 50dc875f2e6e2e04aed3b3033eb0ac99192d6d02 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 13 Dec 2013 17:21:27 +0800 Subject: netvsc: don't flush peers notifying work during setting mtu There's a possible deadlock if we flush the peers notifying work during setting mtu: [ 22.991149] ====================================================== [ 22.991173] [ INFO: possible circular locking dependency detected ] [ 22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted [ 22.991219] ------------------------------------------------------- [ 22.991243] ip/974 is trying to acquire lock: [ 22.991261] ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [] flush_work+0x5/0x2e0 [ 22.991307] but task is already holding lock: [ 22.991330] (rtnl_mutex){+.+.+.}, at: [] rtnetlink_rcv+0x1b/0x40 [ 22.991367] which lock already depends on the new lock. [ 22.991398] the existing dependency chain (in reverse order) is: [ 22.991426] -> #1 (rtnl_mutex){+.+.+.}: [ 22.991449] [] __lock_acquire+0xb19/0x1260 [ 22.991477] [] lock_acquire+0xa2/0x1f0 [ 22.991501] [] mutex_lock_nested+0x89/0x4f0 [ 22.991529] [] rtnl_lock+0x17/0x20 [ 22.991552] [] netdev_notify_peers+0x12/0x30 [ 22.991579] [] netvsc_send_garp+0x22/0x30 [hv_netvsc] [ 22.991610] [] process_one_work+0x211/0x6e0 [ 22.991637] [] worker_thread+0x11b/0x3a0 [ 22.991663] [] kthread+0xed/0x100 [ 22.991686] [] ret_from_fork+0x7c/0xb0 [ 22.991715] -> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}: [ 22.991715] [] check_prevs_add+0x967/0x970 [ 22.991715] [] __lock_acquire+0xb19/0x1260 [ 22.991715] [] lock_acquire+0xa2/0x1f0 [ 22.991715] [] flush_work+0x4e/0x2e0 [ 22.991715] [] __cancel_work_timer+0x95/0x130 [ 22.991715] [] cancel_delayed_work_sync+0x13/0x20 [ 22.991715] [] netvsc_change_mtu+0x84/0x200 [hv_netvsc] [ 22.991715] [] dev_set_mtu+0x34/0x80 [ 22.991715] [] do_setlink+0x23a/0xa00 [ 22.991715] [] rtnl_newlink+0x394/0x5e0 [ 22.991715] [] rtnetlink_rcv_msg+0x9c/0x260 [ 22.991715] [] netlink_rcv_skb+0xa9/0xc0 [ 22.991715] [] rtnetlink_rcv+0x2a/0x40 [ 22.991715] [] netlink_unicast+0xdd/0x190 [ 22.991715] [] netlink_sendmsg+0x337/0x750 [ 22.991715] [] sock_sendmsg+0x99/0xd0 [ 22.991715] [] ___sys_sendmsg+0x39e/0x3b0 [ 22.991715] [] __sys_sendmsg+0x42/0x80 [ 22.991715] [] SyS_sendmsg+0x12/0x20 [ 22.991715] [] system_call_fastpath+0x16/0x1b This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be called from worker and also trying to hold the rtnl_lock. This will lead the flush won't succeed forever. Solve this by not canceling and flushing the work, this is safe because the transmission done by NETDEV_NOTIFY_PEERS was synchronized with the netif_tx_disable() called by netvsc_change_mtu(). Reported-by: Yaju Cao Tested-by: Yaju Cao Cc: K. Y. Srinivasan Cc: Haiyang Zhang Signed-off-by: Jason Wang Acked-by: Haiyang Zhang Signed-off-by: David S. Miller diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 524f713..f813572 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -327,7 +327,6 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu) return -EINVAL; nvdev->start_remove = true; - cancel_delayed_work_sync(&ndevctx->dwork); cancel_work_sync(&ndevctx->work); netif_tx_disable(ndev); rndis_filter_device_remove(hdev); -- cgit v0.10.2 From e47eb5dfb296bf217e9ebee7b2f07486670b9c1b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 15 Dec 2013 10:53:46 -0800 Subject: udp: ipv4: do not use sk_dst_lock from softirq context Using sk_dst_lock from softirq context is not supported right now. Instead of adding BH protection everywhere, udp_sk_rx_dst_set() can instead use xchg(), as suggested by David. Reported-by: Fengguang Wu Fixes: 975022310233 ("udp: ipv4: must add synchronization in udp_sk_rx_dst_set()") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 62c19fd..f140048 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1600,20 +1600,15 @@ static void flush_stack(struct sock **stack, unsigned int count, } /* For TCP sockets, sk_rx_dst is protected by socket lock - * For UDP, we use sk_dst_lock to guard against concurrent changes. + * For UDP, we use xchg() to guard against concurrent changes. */ static void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst) { struct dst_entry *old; - spin_lock(&sk->sk_dst_lock); - old = sk->sk_rx_dst; - if (likely(old != dst)) { - dst_hold(dst); - sk->sk_rx_dst = dst; - dst_release(old); - } - spin_unlock(&sk->sk_dst_lock); + dst_hold(dst); + old = xchg(&sk->sk_rx_dst, dst); + dst_release(old); } /* -- cgit v0.10.2 From d1fc50247693bf9116184c19ca16386ff14f5aed Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Fri, 13 Dec 2013 12:56:05 +0100 Subject: MAINTAINERS: Update the IPsec maintainer entry Add the IPsec git trees and some pure IPsec modules to the IPsec section in the MAINTAINERS file. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 1344816..b8af16d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5911,12 +5911,21 @@ M: Steffen Klassert M: Herbert Xu M: "David S. Miller" L: netdev@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git S: Maintained F: net/xfrm/ F: net/key/ F: net/ipv4/xfrm* +F: net/ipv4/esp4.c +F: net/ipv4/ah4.c +F: net/ipv4/ipcomp.c +F: net/ipv4/ip_vti.c F: net/ipv6/xfrm* +F: net/ipv6/esp6.c +F: net/ipv6/ah6.c +F: net/ipv6/ipcomp6.c +F: net/ipv6/ip6_vti.c F: include/uapi/linux/xfrm.h F: include/net/xfrm.h -- cgit v0.10.2 From 37ab4fa7844a044dc21fde45e2a0fc2f3c3b6490 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Fri, 13 Dec 2013 10:54:22 -0500 Subject: net: unix: allow bind to fail on mutex lock This is similar to the set_peek_off patch where calling bind while the socket is stuck in unix_dgram_recvmsg() will block and cause a hung task spew after a while. This is also the last place that did a straightforward mutex_lock(), so there shouldn't be any more of these patches. Signed-off-by: Sasha Levin Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index a0ca162..a427623 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -718,7 +718,9 @@ static int unix_autobind(struct socket *sock) int err; unsigned int retries = 0; - mutex_lock(&u->readlock); + err = mutex_lock_interruptible(&u->readlock); + if (err) + return err; err = 0; if (u->addr) @@ -877,7 +879,9 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) goto out; addr_len = err; - mutex_lock(&u->readlock); + err = mutex_lock_interruptible(&u->readlock); + if (err) + goto out; err = -EINVAL; if (u->addr) -- cgit v0.10.2 From 188b04d580ab7acf11eb77cb564692050c10edfe Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 14 Dec 2013 04:42:13 +0100 Subject: ipv4: improve documentation of ip_no_pmtu_disc Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 3c12d9a..8a984e9 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -16,8 +16,12 @@ ip_default_ttl - INTEGER Default: 64 (as recommended by RFC1700) ip_no_pmtu_disc - BOOLEAN - Disable Path MTU Discovery. - default FALSE + Disable Path MTU Discovery. If enabled and a + fragmentation-required ICMP is received, the PMTU to this + destination will be set to min_pmtu (see below). You will need + to raise min_pmtu to the smallest interface MTU on your system + manually if you want to avoid locally generated fragments. + Default: FALSE min_pmtu - INTEGER default 552 - minimum discovered Path MTU -- cgit v0.10.2 From 53385d2d1de84f4036a0919ec46964c4e81b83f5 Mon Sep 17 00:00:00 2001 From: Bob Gilligan Date: Sun, 15 Dec 2013 13:39:56 -0800 Subject: neigh: Netlink notification for administrative NUD state change The neighbour code sends up an RTM_NEWNEIGH netlink notification if the NUD state of a neighbour cache entry is changed by a timer (e.g. from REACHABLE to STALE), even if the lladdr of the entry has not changed. But an administrative change to the the NUD state of a neighbour cache entry that does not change the lladdr (e.g. via "ip -4 neigh change ... nud ...") does not trigger a netlink notification. This means that netlink listeners will not hear about administrative NUD state changes such as from a resolved state to PERMANENT. This patch changes the neighbor code to generate an RTM_NEWNEIGH message when the NUD state of an entry is changed administratively. Signed-off-by: Bob Gilligan Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/core/neighbour.c b/net/core/neighbour.c index ca15f32..36b1443 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1161,6 +1161,7 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, neigh->parms->reachable_time : 0))); neigh->nud_state = new; + notify = 1; } if (lladdr != neigh->ha) { -- cgit v0.10.2 From 7022ef8b2a673db3d12a348331181f579afe9b22 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 16 Dec 2013 10:45:05 +0800 Subject: xen-netback: fix fragments error handling in checksum_setup_ip() Fix to return -EPROTO error if fragments detected in checksum_setup_ip(). Fixes: 1431fb31ecba ('xen-netback: fix fragment detection in checksum setup') Signed-off-by: Wei Yongjun Reviewed-by: Paul Durrant Acked-by: Ian Campbell Signed-off-by: David S. Miller diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index e884ee1..27bbe58 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1197,6 +1197,9 @@ static int checksum_setup_ip(struct xenvif *vif, struct sk_buff *skb, err = -EPROTO; + if (fragment) + goto out; + switch (ip_hdr(skb)->protocol) { case IPPROTO_TCP: err = maybe_pull_tail(skb, -- cgit v0.10.2 From b84caae486135d588fb200973b0be8cb8a511edf Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:56 -0500 Subject: qlcnic: Fix usage of netif_tx_{wake, stop} api during link change. o Driver was using netif_tx_{stop,wake}_all_queues() api during link change event. Remove these api calls to manage queue start/stop event, as core networking stack will manage this based on netif_carrier_{on,off} call. These API's were modified as part of commit id 012ec81223aa45d2b80aeafb77392fd1a19c7b10 ("qlcnic: Multi Tx queue support for 82xx Series adapter.") Signed-off-by: Shahed Shaikh Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 0149c94..eda6c69 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -687,17 +687,11 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup) if (adapter->ahw->linkup && !linkup) { netdev_info(netdev, "NIC Link is down\n"); adapter->ahw->linkup = 0; - if (netif_running(netdev)) { - netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); - } + netif_carrier_off(netdev); } else if (!adapter->ahw->linkup && linkup) { netdev_info(netdev, "NIC Link is up\n"); adapter->ahw->linkup = 1; - if (netif_running(netdev)) { - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } + netif_carrier_on(netdev); } } -- cgit v0.10.2 From 3bf517df0d99f1cf5d369c73ab68e0afe6a3c2f9 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:57 -0500 Subject: qlcnic: Fix diagnostic test for all adapters. o Driver should re-allocate all Tx queues after completing diagnostic tests. This regression was added by commit id c2c5e3a0681bb1945c0cb211a5f4baa22cb2cbb3 ("qlcnic: Enable diagnostic test for multiple Tx queues.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index b36c02f..6d3edf6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -948,6 +948,7 @@ static int qlcnic_irq_test(struct net_device *netdev) struct qlcnic_hardware_context *ahw = adapter->ahw; struct qlcnic_cmd_args cmd; int ret, drv_sds_rings = adapter->drv_sds_rings; + int drv_tx_rings = adapter->drv_tx_rings; if (qlcnic_83xx_check(adapter)) return qlcnic_83xx_interrupt_test(netdev); @@ -980,6 +981,7 @@ free_diag_res: clear_diag_irq: adapter->drv_sds_rings = drv_sds_rings; + adapter->drv_tx_rings = drv_tx_rings; clear_bit(__QLCNIC_RESETTING, &adapter->state); return ret; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 05c1eef..aa019c3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1940,7 +1940,6 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) qlcnic_detach(adapter); adapter->drv_sds_rings = QLCNIC_SINGLE_RING; - adapter->drv_tx_rings = QLCNIC_SINGLE_RING; adapter->ahw->diag_test = test; adapter->ahw->linkup = 0; -- cgit v0.10.2 From f9566265d7b44fea789072dcfa9a454e7e433af6 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:58 -0500 Subject: qlcnic: Fix TSS/RSS ring validation logic. o TSS/RSS ring validation does not take into account that either of these ring values can be 0. This patch fixes this validation and would fail set_channel operation if any of these ring value is 0. This regression was added as part of commit id 34e8c406fda5b5a9d2e126a92bab84cd28e3b5fa ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 89208e5..fae1b71 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -2073,8 +2073,8 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) ahw->nic_mode = QLCNIC_DEFAULT_MODE; adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver; ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; - adapter->max_sds_rings = ahw->max_rx_ques; - adapter->max_tx_rings = ahw->max_tx_ques; + adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; + adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS; } else { return -EIO; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 6d3edf6..78f5e81 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -667,9 +667,13 @@ qlcnic_set_ringparam(struct net_device *dev, static int qlcnic_validate_ring_count(struct qlcnic_adapter *adapter, u8 rx_ring, u8 tx_ring) { + if (rx_ring == 0 || tx_ring == 0) + return -EINVAL; + if (rx_ring != 0) { if (rx_ring > adapter->max_sds_rings) { - netdev_err(adapter->netdev, "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n", + netdev_err(adapter->netdev, + "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n", rx_ring, adapter->max_sds_rings); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index aa019c3..2c8cac0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1178,6 +1178,7 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) } else { adapter->ahw->nic_mode = QLCNIC_DEFAULT_MODE; adapter->max_tx_rings = QLCNIC_MAX_HW_TX_RINGS; + adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; adapter->flags &= ~QLCNIC_ESWITCH_ENABLED; } -- cgit v0.10.2 From b17a44d8b86f48e34011b884a934231ae2928d66 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:59 -0500 Subject: qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter. o Current code was not allowing the user to configure more than one Tx ring using ethtool for 83xx/84xx adapter. This regression was introduced by commit id 18afc102fdcb95d6c7d57f2967a06f2f8fe3ba4c ("qlcnic: Enable multiple Tx queue support for 83xx/84xx Series adapter.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 78f5e81..e3be276 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -680,21 +680,12 @@ static int qlcnic_validate_ring_count(struct qlcnic_adapter *adapter, } if (tx_ring != 0) { - if (qlcnic_82xx_check(adapter) && - (tx_ring > adapter->max_tx_rings)) { + if (tx_ring > adapter->max_tx_rings) { netdev_err(adapter->netdev, "Invalid ring count, Tx ring count %d should not be greater than max %d driver Tx rings.\n", tx_ring, adapter->max_tx_rings); return -EINVAL; } - - if (qlcnic_83xx_check(adapter) && - (tx_ring > QLCNIC_SINGLE_RING)) { - netdev_err(adapter->netdev, - "Invalid ring count, Tx ring count %d should not be greater than %d driver Tx rings.\n", - tx_ring, QLCNIC_SINGLE_RING); - return -EINVAL; - } } return 0; -- cgit v0.10.2 From 3fc38e267bfbea5e33e2222d6babc3b06c2bb642 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 16 Dec 2013 15:37:00 -0500 Subject: qlcnic: Fix memory allocation o Use vzalloc() instead of kzalloc() for allocation of bootloader size memory. kzalloc() may fail to allocate the size of bootloader Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index fae1b71..cac0503 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1254,24 +1254,24 @@ static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter) if (size & 0xF) size = (size + 16) & ~0xF; - p_cache = kzalloc(size, GFP_KERNEL); + p_cache = vzalloc(size); if (p_cache == NULL) return -ENOMEM; ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache, size / sizeof(u32)); if (ret) { - kfree(p_cache); + vfree(p_cache); return ret; } /* 16 byte write to MS memory */ ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache, size / 16); if (ret) { - kfree(p_cache); + vfree(p_cache); return ret; } - kfree(p_cache); + vfree(p_cache); return ret; } -- cgit v0.10.2 From 30fa15f64e40c4cf037e3379e55c2323b5d992e2 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 16 Dec 2013 15:37:01 -0500 Subject: qlcnic: Allow firmware dump collection when auto firmware recovery is disabled o Allow driver to collect firmware dump, during a forced firmware dump operation, when auto firmware recovery is disabled. Also, during this operation, driver should not allow reset recovery to be performed. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 4cae6ca..a6a3350 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -662,4 +662,5 @@ pci_ers_result_t qlcnic_83xx_io_error_detected(struct pci_dev *, pci_channel_state_t); pci_ers_result_t qlcnic_83xx_io_slot_reset(struct pci_dev *); void qlcnic_83xx_io_resume(struct pci_dev *); +void qlcnic_83xx_stop_hw(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index cac0503..918e18d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -740,6 +740,7 @@ static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter) adapter->ahw->idc.err_code = -EIO; dev_err(&adapter->pdev->dev, "%s: Device in unknown state\n", __func__); + clear_bit(__QLCNIC_RESETTING, &adapter->state); return 0; } @@ -818,7 +819,6 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) struct qlcnic_hardware_context *ahw = adapter->ahw; struct qlcnic_mailbox *mbx = ahw->mailbox; int ret = 0; - u32 owner; u32 val; /* Perform NIC configuration based ready state entry actions */ @@ -848,9 +848,9 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) set_bit(__QLCNIC_RESETTING, &adapter->state); qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); } else { - owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); - if (ahw->pci_func == owner) - qlcnic_dump_fw(adapter); + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 1); } return -EIO; } @@ -948,13 +948,26 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) return 0; } -static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) +static void qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) { - dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__); + struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 val, owner; + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); + if (ahw->pci_func == owner) { + qlcnic_83xx_stop_hw(adapter); + qlcnic_dump_fw(adapter); + } + } + + netdev_warn(adapter->netdev, "%s: Reboot will be required to recover the adapter!!\n", + __func__); clear_bit(__QLCNIC_RESETTING, &adapter->state); - adapter->ahw->idc.err_code = -EIO; + ahw->idc.err_code = -EIO; - return 0; + return; } static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter) @@ -1063,12 +1076,6 @@ void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work) adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state; qlcnic_83xx_periodic_tasks(adapter); - /* Do not reschedule if firmaware is in hanged state and auto - * recovery is disabled - */ - if ((adapter->flags & QLCNIC_FW_HANG) && !qlcnic_auto_fw_reset) - return; - /* Re-schedule the function */ if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status)) qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, @@ -1219,10 +1226,10 @@ void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key) } val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); - if ((val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) || - !qlcnic_auto_fw_reset) { - dev_err(&adapter->pdev->dev, - "%s:failed, device in non reset mode\n", __func__); + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 0); qlcnic_83xx_unlock_driver(adapter); return; } @@ -1939,7 +1946,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev, p_dev->ahw->reset.seq_index = index; } -static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) +void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) { p_dev->ahw->reset.seq_index = 0; @@ -1994,6 +2001,14 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); if (!(val & QLC_83XX_IDC_GRACEFULL_RESET)) qlcnic_dump_fw(adapter); + + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return err; + } + qlcnic_83xx_init_hw(adapter); if (qlcnic_83xx_copy_bootloader(adapter)) -- cgit v0.10.2 From e49df7947a48b04ee57ee0fa0c4110ef05024c4f Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Mon, 16 Dec 2013 15:37:02 -0500 Subject: qlcnic: Fix mailbox processing during diagnostic test o Do not enable mailbox polling in case of legacy interrupt. Process mailbox AEN/response from the interrupt. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index b1cb0ff..ab66e7f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -447,8 +447,9 @@ irqreturn_t qlcnic_83xx_intr(int irq, void *data) qlcnic_83xx_poll_process_aen(adapter); - if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) { - ahw->diag_cnt++; + if (ahw->diag_test) { + if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) + ahw->diag_cnt++; qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); return IRQ_HANDLED; } @@ -1345,11 +1346,6 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test, } if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { - /* disable and free mailbox interrupt */ - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { - qlcnic_83xx_enable_mbx_poll(adapter); - qlcnic_83xx_free_mbx_intr(adapter); - } adapter->ahw->loopback_state = 0; adapter->ahw->hw_ops->setup_link_event(adapter, 1); } @@ -1363,33 +1359,20 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev, { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_host_sds_ring *sds_ring; - int ring, err; + int ring; clear_bit(__QLCNIC_DEV_UP, &adapter->state); if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->drv_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - qlcnic_83xx_disable_intr(adapter, sds_ring); - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_enable_mbx_poll(adapter); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_disable_intr(adapter, sds_ring); } } qlcnic_fw_destroy_ctx(adapter); qlcnic_detach(adapter); - if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { - err = qlcnic_83xx_setup_mbx_intr(adapter); - qlcnic_83xx_disable_mbx_poll(adapter); - if (err) { - dev_err(&adapter->pdev->dev, - "%s: failed to setup mbx interrupt\n", - __func__); - goto out; - } - } - } adapter->ahw->diag_test = 0; adapter->drv_sds_rings = drv_sds_rings; @@ -1399,9 +1382,6 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev, if (netif_running(netdev)) __qlcnic_up(adapter, netdev); - if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST && - !(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_disable_mbx_poll(adapter); out: netif_device_attach(netdev); } -- cgit v0.10.2 From 0951c5c214e525185572204b587e3b6762d121f4 Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Mon, 16 Dec 2013 15:37:03 -0500 Subject: qlcnic: Dump mailbox registers when mailbox command times out. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index ab66e7f..6055d39 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3734,6 +3734,19 @@ static void qlcnic_83xx_decode_mbx_rsp(struct qlcnic_adapter *adapter, return; } +static inline void qlcnic_dump_mailbox_registers(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 offset; + + offset = QLCRDX(ahw, QLCNIC_DEF_INT_MASK); + dev_info(&adapter->pdev->dev, "Mbx interrupt mask=0x%x, Mbx interrupt enable=0x%x, Host mbx control=0x%x, Fw mbx control=0x%x", + readl(ahw->pci_base0 + offset), + QLCRDX(ahw, QLCNIC_MBX_INTR_ENBL), + QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL), + QLCRDX(ahw, QLCNIC_FW_MBX_CTRL)); +} + static void qlcnic_83xx_mailbox_worker(struct work_struct *work) { struct qlcnic_mailbox *mbx = container_of(work, struct qlcnic_mailbox, @@ -3778,6 +3791,8 @@ static void qlcnic_83xx_mailbox_worker(struct work_struct *work) __func__, cmd->cmd_op, cmd->type, ahw->pci_func, ahw->op_mode); clear_bit(QLC_83XX_MBX_READY, &mbx->status); + qlcnic_dump_mailbox_registers(adapter); + qlcnic_83xx_get_mbx_data(adapter, cmd); qlcnic_dump_mbx(adapter, cmd); qlcnic_83xx_idc_request_reset(adapter, QLCNIC_FORCE_FW_DUMP_KEY); -- cgit v0.10.2