From ae495e844a77344fdaedbb2ad97d925d096e9f0d Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Thu, 25 Oct 2012 00:38:01 -0700 Subject: Input: egalax_ts - get gpio from devicetree The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing Reviewed-by: Shawn Guo Signed-off-by: Hui Wang Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt new file mode 100644 index 0000000..df70318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -0,0 +1,19 @@ +* EETI eGalax Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,egalax_ts" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- wakeup-gpios: the gpio pin to be used for waking up the controller + as well as uased as irq pin + +Example: + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1ba232c..f7668b2 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index c1e3460..13fa62f 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); + struct device_node *np = client->dev.of_node; + int gpio; int ret; + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "wakeup-gpios", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; + ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { dev_err(&client->dev, @@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + error = egalax_wake_up_device(client); + if (error) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) { @@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); +static struct of_device_id egalax_ts_dt_ids[] = { + { .compatible = "eeti,egalax_ts" }, + { /* sentinel */ } +}; + static struct i2c_driver egalax_ts_driver = { .driver = { .name = "egalax_ts", .owner = THIS_MODULE, .pm = &egalax_ts_pm_ops, + .of_match_table = of_match_ptr(egalax_ts_dt_ids), }, .id_table = egalax_ts_id, .probe = egalax_ts_probe, -- cgit v0.10.2