From 14da699bc04212559d5dda19d3f07c807fb58dfd Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 6 Mar 2014 16:38:37 +0200 Subject: phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Felipe Balbi diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 1b607d7..fe8c009 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -31,12 +31,22 @@ config PHY_MVEBU_SATA depends on OF select GENERIC_PHY +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS depends on USB_PHY select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. @@ -47,7 +57,7 @@ config TI_PIPE3 tristate "TI PIPE3 PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY help Enable this to support the PIPE3 PHY that is part of TI SOCs. This driver takes care of all the PHY functionality apart from comparator. diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index ecf0d3f..8da05a8 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c new file mode 100644 index 0000000..17fc200 --- /dev/null +++ b/drivers/phy/phy-omap-control.c @@ -0,0 +1,320 @@ +/* + * omap-control-phy.c - The PHY part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * omap_control_phy_power - power on/off the phy using control module reg + * @dev: the control module device + * @on: 0 or 1, based on powering on or off the PHY + */ +void omap_control_phy_power(struct device *dev, int on) +{ + u32 val; + unsigned long rate; + struct omap_control_phy *control_phy; + + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); + return; + } + + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); + return; + } + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) + return; + + val = readl(control_phy->power); + + switch (control_phy->type) { + case OMAP_CTRL_TYPE_USB2: + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + break; + + case OMAP_CTRL_TYPE_PIPE3: + rate = clk_get_rate(control_phy->sys_clk); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + } + break; + + case OMAP_CTRL_TYPE_DRA7USB2: + if (on) + val &= ~OMAP_CTRL_USB2_PHY_PD; + else + val |= OMAP_CTRL_USB2_PHY_PD; + break; + + case OMAP_CTRL_TYPE_AM437USB2: + if (on) { + val &= ~(AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + val |= (AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + } else { + val &= ~(AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + val |= (AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + } + break; + default: + dev_err(dev, "%s: type %d not recognized\n", + __func__, control_phy->type); + break; + } + + writel(val, control_phy->power); +} +EXPORT_SYMBOL_GPL(omap_control_phy_power); + +/** + * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that a usb + * device has been connected. + */ +static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); + val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that it has been + * connected to a usb host. + */ +static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~OMAP_CTRL_DEV_SESSEND; + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | + OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core it's now in + * disconnected state. + */ +static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode + * or device mode or to denote disconnected state + * @dev: the control module device + * @mode: The mode to which usb should be configured + * + * This is an API to write to the mailbox register to notify the usb core that + * a usb device has been connected. + */ +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ + struct omap_control_phy *ctrl_phy; + + if (IS_ERR(dev) || !dev) + return; + + ctrl_phy = dev_get_drvdata(dev); + + if (!ctrl_phy) { + dev_err(dev, "Invalid control phy device\n"); + return; + } + + if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS) + return; + + switch (mode) { + case USB_MODE_HOST: + omap_control_usb_host_mode(ctrl_phy); + break; + case USB_MODE_DEVICE: + omap_control_usb_device_mode(ctrl_phy); + break; + case USB_MODE_DISCONNECT: + omap_control_usb_set_sessionend(ctrl_phy); + break; + default: + dev_vdbg(dev, "invalid omap control usb mode\n"); + } +} +EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); + +#ifdef CONFIG_OF + +static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; +static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; + +static const struct of_device_id omap_control_phy_id_table[] = { + { + .compatible = "ti,control-phy-otghs", + .data = &otghs_data, + }, + { + .compatible = "ti,control-phy-usb2", + .data = &usb2_data, + }, + { + .compatible = "ti,control-phy-pipe3", + .data = &pipe3_data, + }, + { + .compatible = "ti,control-phy-dra7usb2", + .data = &dra7usb2_data, + }, + { + .compatible = "ti,control-phy-am437usb2", + .data = &am437usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); +#endif + + +static int omap_control_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct of_device_id *of_id; + struct omap_control_phy *control_phy; + + of_id = of_match_device(of_match_ptr(omap_control_phy_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; + + control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), + GFP_KERNEL); + if (!control_phy) { + dev_err(&pdev->dev, "unable to alloc memory for control phy\n"); + return -ENOMEM; + } + + control_phy->dev = &pdev->dev; + control_phy->type = *(enum omap_control_phy_type *)of_id->data; + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "otghs_control"); + control_phy->otghs_control = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_phy->otghs_control)) + return PTR_ERR(control_phy->otghs_control); + } else { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "power"); + control_phy->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->power)) { + dev_err(&pdev->dev, "Couldn't get power register\n"); + return PTR_ERR(control_phy->power); + } + } + + if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) { + control_phy->sys_clk = devm_clk_get(control_phy->dev, + "sys_clkin"); + if (IS_ERR(control_phy->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + } + + dev_set_drvdata(control_phy->dev, control_phy); + + return 0; +} + +static struct platform_driver omap_control_phy_driver = { + .probe = omap_control_phy_probe, + .driver = { + .name = "omap-control-phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_control_phy_id_table), + }, +}; + +static int __init omap_control_phy_init(void) +{ + return platform_driver_register(&omap_control_phy_driver); +} +subsys_initcall(omap_control_phy_init); + +static void __exit omap_control_phy_exit(void) +{ + platform_driver_unregister(&omap_control_phy_driver); +} +module_exit(omap_control_phy_exit); + +MODULE_ALIAS("platform: omap_control_phy"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP Control Module PHY Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 3cc4aba..a2205a8 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include @@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); return 0; } @@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_usb_phy_power(phy->control_dev, 1); + omap_control_phy_power(phy->control_dev, 1); return 0; } @@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy->control_dev = &control_pdev->dev; - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index c8d1674..fd029b1 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #define PLL_STATUS 0x00000004 @@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x) return -EBUSY; } - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); return 0; } @@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x) if (ret) return ret; - omap_control_usb_phy_power(phy->control_dev, 1); + omap_control_phy_power(phy->control_dev, 1); return 0; } @@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) phy->control_dev = &control_pdev->dev; - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); platform_set_drvdata(pdev, phy); pm_runtime_enable(phy->dev); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8aa59a2..d341c14 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include "musb_core.h" diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index c337ba2..416e0c8 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -75,16 +75,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. - config AM335X_CONTROL_USB tristate diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 15f1878..f8fa719 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o -obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c deleted file mode 100644 index e725318..0000000 --- a/drivers/usb/phy/phy-omap-control.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * omap-control-usb.c - The USB part of control module. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/** - * omap_control_usb_phy_power - power on/off the phy using control module reg - * @dev: the control module device - * @on: 0 or 1, based on powering on or off the PHY - */ -void omap_control_usb_phy_power(struct device *dev, int on) -{ - u32 val; - unsigned long rate; - struct omap_control_usb *control_usb; - - if (IS_ERR(dev) || !dev) { - pr_err("%s: invalid device\n", __func__); - return; - } - - control_usb = dev_get_drvdata(dev); - if (!control_usb) { - dev_err(dev, "%s: invalid control usb device\n", __func__); - return; - } - - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) - return; - - val = readl(control_usb->power); - - switch (control_usb->type) { - case OMAP_CTRL_TYPE_USB2: - if (on) - val &= ~OMAP_CTRL_DEV_PHY_PD; - else - val |= OMAP_CTRL_DEV_PHY_PD; - break; - - case OMAP_CTRL_TYPE_PIPE3: - rate = clk_get_rate(control_usb->sys_clk); - rate = rate/1000000; - - if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - } - break; - - case OMAP_CTRL_TYPE_DRA7USB2: - if (on) - val &= ~OMAP_CTRL_USB2_PHY_PD; - else - val |= OMAP_CTRL_USB2_PHY_PD; - break; - - case OMAP_CTRL_TYPE_AM437USB2: - if (on) { - val &= ~(AM437X_CTRL_USB2_PHY_PD | - AM437X_CTRL_USB2_OTG_PD); - val |= (AM437X_CTRL_USB2_OTGVDET_EN | - AM437X_CTRL_USB2_OTGSESSEND_EN); - } else { - val &= ~(AM437X_CTRL_USB2_OTGVDET_EN | - AM437X_CTRL_USB2_OTGSESSEND_EN); - val |= (AM437X_CTRL_USB2_PHY_PD | - AM437X_CTRL_USB2_OTG_PD); - } - break; - default: - dev_err(dev, "%s: type %d not recognized\n", - __func__, control_usb->type); - break; - } - - writel(val, control_usb->power); -} -EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); - -/** - * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that a usb - * device has been connected. - */ -static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); - val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that it has been - * connected to a usb host. - */ -static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~OMAP_CTRL_DEV_SESSEND; - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | - OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core it's now in - * disconnected state. - */ -static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode - * or device mode or to denote disconnected state - * @dev: the control module device - * @mode: The mode to which usb should be configured - * - * This is an API to write to the mailbox register to notify the usb core that - * a usb device has been connected. - */ -void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode) -{ - struct omap_control_usb *ctrl_usb; - - if (IS_ERR(dev) || !dev) - return; - - ctrl_usb = dev_get_drvdata(dev); - - if (!ctrl_usb) { - dev_err(dev, "Invalid control usb device\n"); - return; - } - - if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) - return; - - switch (mode) { - case USB_MODE_HOST: - omap_control_usb_host_mode(ctrl_usb); - break; - case USB_MODE_DEVICE: - omap_control_usb_device_mode(ctrl_usb); - break; - case USB_MODE_DISCONNECT: - omap_control_usb_set_sessionend(ctrl_usb); - break; - default: - dev_vdbg(dev, "invalid omap control usb mode\n"); - } -} -EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); - -#ifdef CONFIG_OF - -static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; -static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; -static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; -static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; -static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; - -static const struct of_device_id omap_control_usb_id_table[] = { - { - .compatible = "ti,control-phy-otghs", - .data = &otghs_data, - }, - { - .compatible = "ti,control-phy-usb2", - .data = &usb2_data, - }, - { - .compatible = "ti,control-phy-pipe3", - .data = &pipe3_data, - }, - { - .compatible = "ti,control-phy-dra7usb2", - .data = &dra7usb2_data, - }, - { - .compatible = "ti,control-phy-am437usb2", - .data = &am437usb2_data, - }, - {}, -}; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); -#endif - - -static int omap_control_usb_probe(struct platform_device *pdev) -{ - struct resource *res; - const struct of_device_id *of_id; - struct omap_control_usb *control_usb; - - of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), - &pdev->dev); - if (!of_id) - return -EINVAL; - - control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), - GFP_KERNEL); - if (!control_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); - return -ENOMEM; - } - - control_usb->dev = &pdev->dev; - control_usb->type = *(enum omap_control_usb_type *)of_id->data; - - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "otghs_control"); - control_usb->otghs_control = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->otghs_control)) - return PTR_ERR(control_usb->otghs_control); - } else { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "power"); - control_usb->power = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->power)) { - dev_err(&pdev->dev, "Couldn't get power register\n"); - return PTR_ERR(control_usb->power); - } - } - - if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { - control_usb->sys_clk = devm_clk_get(control_usb->dev, - "sys_clkin"); - if (IS_ERR(control_usb->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - } - - dev_set_drvdata(control_usb->dev, control_usb); - - return 0; -} - -static struct platform_driver omap_control_usb_driver = { - .probe = omap_control_usb_probe, - .driver = { - .name = "omap-control-usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), - }, -}; - -static int __init omap_control_usb_init(void) -{ - return platform_driver_register(&omap_control_usb_driver); -} -subsys_initcall(omap_control_usb_init); - -static void __exit omap_control_usb_exit(void) -{ - platform_driver_unregister(&omap_control_usb_driver); -} -module_exit(omap_control_usb_exit); - -MODULE_ALIAS("platform: omap_control_usb"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP Control Module USB Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h new file mode 100644 index 0000000..5450403 --- /dev/null +++ b/include/linux/phy/omap_control_phy.h @@ -0,0 +1,89 @@ +/* + * omap_control_phy.h - Header file for the PHY part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __OMAP_CONTROL_PHY_H__ +#define __OMAP_CONTROL_PHY_H__ + +enum omap_control_phy_type { + OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ + OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ + OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ + OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ + OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ +}; + +struct omap_control_phy { + struct device *dev; + + u32 __iomem *otghs_control; + u32 __iomem *power; + u32 __iomem *power_aux; + + struct clk *sys_clk; + + enum omap_control_phy_type type; +}; + +enum omap_control_usb_mode { + USB_MODE_UNDEFINED = 0, + USB_MODE_HOST, + USB_MODE_DEVICE, + USB_MODE_DISCONNECT, +}; + +#define OMAP_CTRL_DEV_PHY_PD BIT(0) + +#define OMAP_CTRL_DEV_AVALID BIT(0) +#define OMAP_CTRL_DEV_BVALID BIT(1) +#define OMAP_CTRL_DEV_VBUSVALID BIT(2) +#define OMAP_CTRL_DEV_SESSEND BIT(3) +#define OMAP_CTRL_DEV_IDDIG BIT(4) + +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE + +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 + +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 + +#define OMAP_CTRL_USB2_PHY_PD BIT(28) + +#define AM437X_CTRL_USB2_PHY_PD BIT(0) +#define AM437X_CTRL_USB2_OTG_PD BIT(1) +#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19) +#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20) + +#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY) +void omap_control_phy_power(struct device *dev, int on); +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode); +#else + +static inline void omap_control_phy_power(struct device *dev, int on) +{ +} + +static inline void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ +} +#endif + +#endif /* __OMAP_CONTROL_PHY_H__ */ diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h deleted file mode 100644 index 69ae383..0000000 --- a/include/linux/usb/omap_control_usb.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * omap_control_usb.h - Header file for the USB part of control module. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __OMAP_CONTROL_USB_H__ -#define __OMAP_CONTROL_USB_H__ - -enum omap_control_usb_type { - OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ - OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ - OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ - OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ - OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ -}; - -struct omap_control_usb { - struct device *dev; - - u32 __iomem *otghs_control; - u32 __iomem *power; - u32 __iomem *power_aux; - - struct clk *sys_clk; - - enum omap_control_usb_type type; -}; - -enum omap_control_usb_mode { - USB_MODE_UNDEFINED = 0, - USB_MODE_HOST, - USB_MODE_DEVICE, - USB_MODE_DISCONNECT, -}; - -#define OMAP_CTRL_DEV_PHY_PD BIT(0) - -#define OMAP_CTRL_DEV_AVALID BIT(0) -#define OMAP_CTRL_DEV_BVALID BIT(1) -#define OMAP_CTRL_DEV_VBUSVALID BIT(2) -#define OMAP_CTRL_DEV_SESSEND BIT(3) -#define OMAP_CTRL_DEV_IDDIG BIT(4) - -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE - -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16 - -#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 - -#define OMAP_CTRL_USB2_PHY_PD BIT(28) - -#define AM437X_CTRL_USB2_PHY_PD BIT(0) -#define AM437X_CTRL_USB2_OTG_PD BIT(1) -#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19) -#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20) - -#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) -extern void omap_control_usb_phy_power(struct device *dev, int on); -extern void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode); -#else - -static inline void omap_control_usb_phy_power(struct device *dev, int on) -{ -} - -static inline void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode) -{ -} -#endif - -#endif /* __OMAP_CONTROL_USB_H__ */ -- cgit v0.10.2