From 9b5bd5a4917eeb5eca00d1842a74186cfc8dd1c6 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Wed, 20 Feb 2013 09:41:08 -0800 Subject: mac80211: stop timers before canceling work items Re-order the quiesce code so that timers are always stopped before work-items are flushed. This was not the problem I saw, but I think it may still be more correct. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9f6464f..6044c6d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3503,6 +3503,14 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; /* + * Stop timers before deleting work items, as timers + * could race and re-add the work-items. They will be + * re-established on connection. + */ + del_timer_sync(&ifmgd->conn_mon_timer); + del_timer_sync(&ifmgd->bcn_mon_timer); + + /* * we need to use atomic bitops for the running bits * only because both timers might fire at the same * time -- the code here is properly synchronised. @@ -3516,13 +3524,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) if (del_timer_sync(&ifmgd->timer)) set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); - cancel_work_sync(&ifmgd->chswitch_work); if (del_timer_sync(&ifmgd->chswitch_timer)) set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); - - /* these will just be re-established on connection */ - del_timer_sync(&ifmgd->conn_mon_timer); - del_timer_sync(&ifmgd->bcn_mon_timer); + cancel_work_sync(&ifmgd->chswitch_work); } void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) -- cgit v0.10.2 From 499218595a2e8296b7492af32fcca141b7b8184a Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Wed, 20 Feb 2013 09:41:09 -0800 Subject: mac80211: Fix crash due to un-canceled work-items Some mlme work structs are not cancelled on disassociation nor interface deletion, which leads to them running after the memory has been freed There is not a clean way to cancel these in the disassociation logic because they must be canceled outside of the ifmgd->mtx lock, so just cancel them in mgd_stop logic that tears down the station. This fixes the crashes we see in 3.7.9+. The crash stack trace itself isn't so helpful, but this warning gives more useful info: WARNING: at /home/greearb/git/linux-3.7.dev.y/lib/debugobjects.c:261 debug_print_object+0x7c/0x8d() ODEBUG: free active (active state 0) object type: work_struct hint: ieee80211_sta_monitor_work+0x0/0x14 [mac80211] Modules linked in: [...] Pid: 14743, comm: iw Tainted: G C O 3.7.9+ #11 Call Trace: [] warn_slowpath_common+0x80/0x98 [] warn_slowpath_fmt+0x41/0x43 [] debug_print_object+0x7c/0x8d [] debug_check_no_obj_freed+0x95/0x1c3 [] slab_free_hook+0x70/0x79 [] kfree+0x62/0xb7 [] netdev_release+0x39/0x3e [] device_release+0x52/0x8a [] kobject_release+0x121/0x158 [] kobject_put+0x4c/0x50 [] netdev_run_todo+0x25c/0x27e Cc: stable@vger.kernel.org Signed-off-by: Ben Greear Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6044c6d..b756d29 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4319,6 +4319,17 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + /* + * Make sure some work items will not run after this, + * they will not do anything but might not have been + * cancelled when disconnecting. + */ + cancel_work_sync(&ifmgd->monitor_work); + cancel_work_sync(&ifmgd->beacon_connection_loss_work); + cancel_work_sync(&ifmgd->request_smps_work); + cancel_work_sync(&ifmgd->csa_connection_drop_work); + cancel_work_sync(&ifmgd->chswitch_work); + mutex_lock(&ifmgd->mtx); if (ifmgd->assoc_data) ieee80211_destroy_assoc_data(sdata, false); -- cgit v0.10.2 From d0ae708d1acd4bf6ad5b9937d9da44d16ca18f13 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Feb 2013 15:08:28 +0100 Subject: nl80211: remove channel width and extended capa advertising This is another case of data increasing the size of the wiphy information significantly with a new feature, for now remove this as well. Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 33b75b9..9220021 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -367,8 +367,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy.rts_threshold = (u32) -1; rdev->wiphy.coverage_class = 0; - rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH | - NL80211_FEATURE_ADVERTISE_CHAN_LIMITS; + rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH; return &rdev->wiphy; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e652d05..7a7b621 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -557,18 +557,6 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_RADAR) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS)) - goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS)) - goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ)) - goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ)) - goto nla_put_failure; if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) @@ -1310,15 +1298,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.max_acl_mac_addrs)) goto nla_put_failure; - if (dev->wiphy.extended_capabilities && - (nla_put(msg, NL80211_ATTR_EXT_CAPA, - dev->wiphy.extended_capabilities_len, - dev->wiphy.extended_capabilities) || - nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK, - dev->wiphy.extended_capabilities_len, - dev->wiphy.extended_capabilities_mask))) - goto nla_put_failure; - return genlmsg_end(msg, hdr); nla_put_failure: -- cgit v0.10.2 From feda30271e5455394c57e35eba66db88d1b15077 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 28 Feb 2013 09:59:22 +0100 Subject: mac80211: really fix monitor mode channel reporting After Felix's patch it was still broken in case you used more than just a single monitor interface. Fix it better now. Reported-by: Sujith Manoharan Tested-by: Sujith Manoharan Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 808f5fc..fb30681 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3290,14 +3290,19 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy, int ret = -ENODATA; rcu_read_lock(); - if (local->use_chanctx) { - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (chanctx_conf) { - *chandef = chanctx_conf->def; - ret = 0; - } - } else if (local->open_count == local->monitors) { - *chandef = local->monitor_chandef; + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + if (chanctx_conf) { + *chandef = chanctx_conf->def; + ret = 0; + } else if (local->open_count > 0 && + local->open_count == local->monitors && + sdata->vif.type == NL80211_IFTYPE_MONITOR) { + if (local->use_chanctx) + *chandef = local->monitor_chandef; + else + cfg80211_chandef_create(chandef, + local->_oper_channel, + local->_oper_channel_type); ret = 0; } rcu_read_unlock(); -- cgit v0.10.2 From 98891754ea9453de4db9111c91b20122ca330101 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2013 11:28:19 +0100 Subject: iwlwifi: don't map complete commands bidirectionally The reason we mapped them bidirectionally was that not doing so had caused IOMMU exceptions, due to the fact that the HW writes back into the command. Now that the first part of the command including the write-back part is always in the first buffer, we don't need to map the remaining buffer(s) bidi and can get rid of the special-casing for commands. This is a requisite patch for another one to fix DMA mapping. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 8b625a7..975492f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -367,8 +367,8 @@ static inline u8 iwl_pcie_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, - struct iwl_cmd_meta *meta, struct iwl_tfd *tfd, - enum dma_data_direction dma_dir) + struct iwl_cmd_meta *meta, + struct iwl_tfd *tfd) { int i; int num_tbs; @@ -392,7 +392,8 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i), - iwl_pcie_tfd_tb_get_len(tfd, i), dma_dir); + iwl_pcie_tfd_tb_get_len(tfd, i), + DMA_TO_DEVICE); tfd->num_tbs = 0; } @@ -406,8 +407,7 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, * Does NOT advance any TFD circular buffer read/write indexes * Does NOT free the TFD itself (which is within circular buffer) */ -static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq, - enum dma_data_direction dma_dir) +static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq) { struct iwl_tfd *tfd_tmp = txq->tfds; @@ -418,8 +418,7 @@ static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq, lockdep_assert_held(&txq->lock); /* We have only q->n_window txq->entries, but we use q->n_bd tfds */ - iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr], - dma_dir); + iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr]); /* free SKB */ if (txq->entries) { @@ -565,22 +564,13 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id) struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_txq *txq = &trans_pcie->txq[txq_id]; struct iwl_queue *q = &txq->q; - enum dma_data_direction dma_dir; if (!q->n_bd) return; - /* In the command queue, all the TBs are mapped as BIDI - * so unmap them as such. - */ - if (txq_id == trans_pcie->cmd_queue) - dma_dir = DMA_BIDIRECTIONAL; - else - dma_dir = DMA_TO_DEVICE; - spin_lock_bh(&txq->lock); while (q->write_ptr != q->read_ptr) { - iwl_pcie_txq_free_tfd(trans, txq, dma_dir); + iwl_pcie_txq_free_tfd(trans, txq); q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd); } spin_unlock_bh(&txq->lock); @@ -962,7 +952,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, iwl_pcie_txq_inval_byte_cnt_tbl(trans, txq); - iwl_pcie_txq_free_tfd(trans, txq, DMA_TO_DEVICE); + iwl_pcie_txq_free_tfd(trans, txq); } iwl_pcie_txq_progress(trans_pcie, txq); @@ -1340,11 +1330,10 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP) data = dup_buf; phys_addr = dma_map_single(trans->dev, (void *)data, - cmdlen[i], DMA_BIDIRECTIONAL); + cmdlen[i], DMA_TO_DEVICE); if (dma_mapping_error(trans->dev, phys_addr)) { iwl_pcie_tfd_unmap(trans, out_meta, - &txq->tfds[q->write_ptr], - DMA_BIDIRECTIONAL); + &txq->tfds[q->write_ptr]); idx = -ENOMEM; goto out; } @@ -1418,7 +1407,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, cmd = txq->entries[cmd_index].cmd; meta = &txq->entries[cmd_index].meta; - iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); + iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index]); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { -- cgit v0.10.2 From 1afbfb6041fb8f639e742620ad933c347e14ba2c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2013 11:32:26 +0100 Subject: iwlwifi: rename IWL_MAX_CMD_TFDS to IWL_MAX_CMD_TBS_PER_TFD The IWL_MAX_CMD_TFDS name for this constant is wrong, the constant really indicates how many TBs we can use in the driver for a single command TFD, rename the constant and also add a comment explaining it. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index 10f0179..81aa91f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -363,7 +363,7 @@ TRACE_EVENT(iwlwifi_dev_hcmd, __entry->flags = cmd->flags; memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr)); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { if (!cmd->len[i]) continue; memcpy((u8 *)__get_dynamic_array(hcmd) + offset, diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 8c7bec6..058947f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -217,7 +217,11 @@ struct iwl_device_cmd { #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) -#define IWL_MAX_CMD_TFDS 2 +/* + * number of transfer buffers (fragments) per transmit frame descriptor; + * this is just the driver's idea, the hardware supports 20 + */ +#define IWL_MAX_CMD_TBS_PER_TFD 2 /** * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command @@ -254,15 +258,15 @@ enum iwl_hcmd_dataflag { * @id: id of the host command */ struct iwl_host_cmd { - const void *data[IWL_MAX_CMD_TFDS]; + const void *data[IWL_MAX_CMD_TBS_PER_TFD]; struct iwl_rx_packet *resp_pkt; unsigned long _rx_page_addr; u32 _rx_page_order; int handler_status; u32 flags; - u16 len[IWL_MAX_CMD_TFDS]; - u8 dataflags[IWL_MAX_CMD_TFDS]; + u16 len[IWL_MAX_CMD_TBS_PER_TFD]; + u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD]; u8 id; }; diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 975492f..ff80a7e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1146,16 +1146,16 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, bool had_nocopy = false; int i; u32 cmd_pos; - const u8 *cmddata[IWL_MAX_CMD_TFDS]; - u16 cmdlen[IWL_MAX_CMD_TFDS]; + const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD]; + u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD]; copy_size = sizeof(out_cmd->hdr); cmd_size = sizeof(out_cmd->hdr); /* need one for the header if the first is NOCOPY */ - BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1); + BUILD_BUG_ON(IWL_MAX_CMD_TBS_PER_TFD > IWL_NUM_OF_TBS - 1); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { cmddata[i] = cmd->data[i]; cmdlen[i] = cmd->len[i]; @@ -1250,7 +1250,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, /* and copy the data that needs to be copied */ cmd_pos = offsetof(struct iwl_device_cmd, payload); copy_size = sizeof(out_cmd->hdr); - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { int copy = 0; if (!cmd->len) @@ -1319,7 +1319,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1); /* map the remaining (adjusted) nocopy/dup fragments */ - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { + for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { const void *data = cmddata[i]; if (!cmdlen[i]) -- cgit v0.10.2 From aed7d9ac1836defe033b561f4306e39014ac56fd Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 20 Feb 2013 11:33:00 +0200 Subject: iwlwifi: disable 8K A-MSDU by default Supporting 8K A-MSDU means that we need to allocate order 1 pages for every Rx packet. Even when there is no traffic. This adds stress on the memory manager. The handling of compound pages is also less trivial for the memory manager and not using them will make the allocation code run faster although I didn't really measure. Eric also pointed out that having huge buffers with little data in them is not very nice towards the TCP stack since the truesize of the skb is huge. This doesn't allow TCP to have a big Rx window. See https://patchwork.kernel.org/patch/2167711/ for details. Note that very few vendors will actually send A-MSDU. Disable this feature by default. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 6f228bb..fbfd2d1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1102,7 +1102,6 @@ void iwl_drv_stop(struct iwl_drv *drv) /* shared module parameters */ struct iwl_mod_params iwlwifi_mod_params = { - .amsdu_size_8K = 1, .restart_fw = 1, .plcp_check = true, .bt_coex_active = true, @@ -1207,7 +1206,7 @@ MODULE_PARM_DESC(11n_disable, "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K, int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); +MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)"); module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO); MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h index e5e3a79..2c2a729 100644 --- a/drivers/net/wireless/iwlwifi/iwl-modparams.h +++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h @@ -91,7 +91,7 @@ enum iwl_power_level { * @sw_crypto: using hardware encryption, default = 0 * @disable_11n: disable 11n capabilities, default = 0, * use IWL_DISABLE_HT_* constants - * @amsdu_size_8K: enable 8K amsdu size, default = 1 + * @amsdu_size_8K: enable 8K amsdu size, default = 0 * @restart_fw: restart firmware, default = 1 * @plcp_check: enable plcp health check, default = true * @wd_disable: enable stuck queue check, default = 0 -- cgit v0.10.2 From 38c0f334b359953f010e9b921e0b55278d3918f7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Feb 2013 13:18:50 +0100 Subject: iwlwifi: use coherent DMA memory for command header Recently in commit 8a964f44e01ad3bbc208c3e80d931ba91b9ea786 ("iwlwifi: always copy first 16 bytes of commands") we fixed the problem that the hardware writes back to the command and that could overwrite parts of the data that was still needed and would thus be corrupted. Investigating this problem more closely we found that this write-back isn't really ordered very well with respect to other DMA traffic. Therefore, it sometimes happened that the write-back occurred after unmapping the command again which is clearly an issue and could corrupt the next allocation that goes to that spot, or (better) cause IOMMU faults. To fix this, allocate coherent memory for the first 16 bytes of each command, containing the write-back part, and use it for all queues. All the dynamic DMA mappings only need to be TO_DEVICE then. This ensures that even when the write-back happens "too late" it can't hit memory that has been freed or a mapping that doesn't exist any more. Since now the actual command is no longer modified, we can also remove CMD_WANT_HCMD and get rid of the DMA sync that was necessary to update the scratch pointer. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index 94ef338..b775769 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -151,7 +151,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : ""); if (!(flags & CMD_ASYNC)) { - cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD; + cmd.flags |= CMD_WANT_SKB; might_sleep(); } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 058947f..0cac2b7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -186,19 +186,13 @@ struct iwl_rx_packet { * @CMD_ASYNC: Return right away and don't want for the response * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the * response. The caller needs to call iwl_free_resp when done. - * @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the - * response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be - * copied. The pointer passed to the response handler is in the transport - * ownership and don't need to be freed by the op_mode. This also means - * that the pointer is invalidated after the op_mode's handler returns. * @CMD_ON_DEMAND: This command is sent by the test mode pipe. */ enum CMD_MODE { CMD_SYNC = 0, CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), - CMD_WANT_HCMD = BIT(2), - CMD_ON_DEMAND = BIT(3), + CMD_ON_DEMAND = BIT(2), }; #define DEF_CMD_PAYLOAD_SIZE 320 diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 3d62e80..148843e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -137,10 +137,6 @@ static inline int iwl_queue_dec_wrap(int index, int n_bd) struct iwl_cmd_meta { /* only for SYNC commands, iff the reply skb is wanted */ struct iwl_host_cmd *source; - - DEFINE_DMA_UNMAP_ADDR(mapping); - DEFINE_DMA_UNMAP_LEN(len); - u32 flags; }; @@ -185,25 +181,36 @@ struct iwl_queue { /* * The FH will write back to the first TB only, so we need * to copy some data into the buffer regardless of whether - * it should be mapped or not. This indicates how much to - * copy, even for HCMDs it must be big enough to fit the - * DRAM scratch from the TX cmd, at least 16 bytes. + * it should be mapped or not. This indicates how big the + * first TB must be to include the scratch buffer. Since + * the scratch is 4 bytes at offset 12, it's 16 now. If we + * make it bigger then allocations will be bigger and copy + * slower, so that's probably not useful. */ -#define IWL_HCMD_MIN_COPY_SIZE 16 +#define IWL_HCMD_SCRATCHBUF_SIZE 16 struct iwl_pcie_txq_entry { struct iwl_device_cmd *cmd; - struct iwl_device_cmd *copy_cmd; struct sk_buff *skb; /* buffer to free after command completes */ const void *free_buf; struct iwl_cmd_meta meta; }; +struct iwl_pcie_txq_scratch_buf { + struct iwl_cmd_header hdr; + u8 buf[8]; + __le32 scratch; +}; + /** * struct iwl_txq - Tx Queue for DMA * @q: generic Rx/Tx queue descriptor * @tfds: transmit frame descriptors (DMA memory) + * @scratchbufs: start of command headers, including scratch buffers, for + * the writeback -- this is DMA memory and an array holding one buffer + * for each command on the queue + * @scratchbufs_dma: DMA address for the scratchbufs start * @entries: transmit entries (driver state) * @lock: queue lock * @stuck_timer: timer that fires if queue gets stuck @@ -217,6 +224,8 @@ struct iwl_pcie_txq_entry { struct iwl_txq { struct iwl_queue q; struct iwl_tfd *tfds; + struct iwl_pcie_txq_scratch_buf *scratchbufs; + dma_addr_t scratchbufs_dma; struct iwl_pcie_txq_entry *entries; spinlock_t lock; struct timer_list stuck_timer; @@ -225,6 +234,13 @@ struct iwl_txq { u8 active; }; +static inline dma_addr_t +iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx) +{ + return txq->scratchbufs_dma + + sizeof(struct iwl_pcie_txq_scratch_buf) * idx; +} + /** * struct iwl_trans_pcie - PCIe transport specific data * @rxq: all the RX queue data diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index b0ae06d..567e67a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -637,22 +637,14 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans, index = SEQ_TO_INDEX(sequence); cmd_index = get_cmd_index(&txq->q, index); - if (reclaim) { - struct iwl_pcie_txq_entry *ent; - ent = &txq->entries[cmd_index]; - cmd = ent->copy_cmd; - WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD); - } else { + if (reclaim) + cmd = txq->entries[cmd_index].cmd; + else cmd = NULL; - } err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd); if (reclaim) { - /* The original command isn't needed any more */ - kfree(txq->entries[cmd_index].copy_cmd); - txq->entries[cmd_index].copy_cmd = NULL; - /* nor is the duplicated part of the command */ kfree(txq->entries[cmd_index].free_buf); txq->entries[cmd_index].free_buf = NULL; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index ff80a7e..8595c16 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -191,12 +191,9 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) } for (i = q->read_ptr; i != q->write_ptr; - i = iwl_queue_inc_wrap(i, q->n_bd)) { - struct iwl_tx_cmd *tx_cmd = - (struct iwl_tx_cmd *)txq->entries[i].cmd->payload; + i = iwl_queue_inc_wrap(i, q->n_bd)) IWL_ERR(trans, "scratch %d = 0x%08x\n", i, - get_unaligned_le32(&tx_cmd->scratch)); - } + le32_to_cpu(txq->scratchbufs[i].scratch)); iwl_op_mode_nic_error(trans->op_mode); } @@ -382,14 +379,8 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, return; } - /* Unmap tx_cmd */ - if (num_tbs) - dma_unmap_single(trans->dev, - dma_unmap_addr(meta, mapping), - dma_unmap_len(meta, len), - DMA_BIDIRECTIONAL); + /* first TB is never freed - it's the scratchbuf data */ - /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i), iwl_pcie_tfd_tb_get_len(tfd, i), @@ -478,6 +469,7 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans, { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX; + size_t scratchbuf_sz; int i; if (WARN_ON(txq->entries || txq->tfds)) @@ -513,9 +505,25 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans, IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz); goto error; } + + BUILD_BUG_ON(IWL_HCMD_SCRATCHBUF_SIZE != sizeof(*txq->scratchbufs)); + BUILD_BUG_ON(offsetof(struct iwl_pcie_txq_scratch_buf, scratch) != + sizeof(struct iwl_cmd_header) + + offsetof(struct iwl_tx_cmd, scratch)); + + scratchbuf_sz = sizeof(*txq->scratchbufs) * slots_num; + + txq->scratchbufs = dma_alloc_coherent(trans->dev, scratchbuf_sz, + &txq->scratchbufs_dma, + GFP_KERNEL); + if (!txq->scratchbufs) + goto err_free_tfds; + txq->q.id = txq_id; return 0; +err_free_tfds: + dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->q.dma_addr); error: if (txq->entries && txq_id == trans_pcie->cmd_queue) for (i = 0; i < slots_num; i++) @@ -600,7 +608,6 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) if (txq_id == trans_pcie->cmd_queue) for (i = 0; i < txq->q.n_window; i++) { kfree(txq->entries[i].cmd); - kfree(txq->entries[i].copy_cmd); kfree(txq->entries[i].free_buf); } @@ -609,6 +616,10 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) dma_free_coherent(dev, sizeof(struct iwl_tfd) * txq->q.n_bd, txq->tfds, txq->q.dma_addr); txq->q.dma_addr = 0; + + dma_free_coherent(dev, + sizeof(*txq->scratchbufs) * txq->q.n_window, + txq->scratchbufs, txq->scratchbufs_dma); } kfree(txq->entries); @@ -1142,7 +1153,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, void *dup_buf = NULL; dma_addr_t phys_addr; int idx; - u16 copy_size, cmd_size, dma_size; + u16 copy_size, cmd_size, scratch_size; bool had_nocopy = false; int i; u32 cmd_pos; @@ -1162,9 +1173,9 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (!cmd->len[i]) continue; - /* need at least IWL_HCMD_MIN_COPY_SIZE copied */ - if (copy_size < IWL_HCMD_MIN_COPY_SIZE) { - int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size; + /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ + if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) { + int copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size; if (copy > cmdlen[i]) copy = cmdlen[i]; @@ -1256,9 +1267,9 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, if (!cmd->len) continue; - /* need at least IWL_HCMD_MIN_COPY_SIZE copied */ - if (copy_size < IWL_HCMD_MIN_COPY_SIZE) { - copy = IWL_HCMD_MIN_COPY_SIZE - copy_size; + /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ + if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) { + copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size; if (copy > cmd->len[i]) copy = cmd->len[i]; @@ -1276,48 +1287,36 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, } } - WARN_ON_ONCE(txq->entries[idx].copy_cmd); - - /* - * since out_cmd will be the source address of the FH, it will write - * the retry count there. So when the user needs to receivce the HCMD - * that corresponds to the response in the response handler, it needs - * to set CMD_WANT_HCMD. - */ - if (cmd->flags & CMD_WANT_HCMD) { - txq->entries[idx].copy_cmd = - kmemdup(out_cmd, cmd_pos, GFP_ATOMIC); - if (unlikely(!txq->entries[idx].copy_cmd)) { - idx = -ENOMEM; - goto out; - } - } - IWL_DEBUG_HC(trans, "Sending command %s (#%x), seq: 0x%04X, %d bytes at %d[%d]:%d\n", get_cmd_string(trans_pcie, out_cmd->hdr.cmd), out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue); - /* - * If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must - * still map at least that many bytes for the hardware to write back to. - * We have enough space, so that's not a problem. - */ - dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE); + /* start the TFD with the scratchbuf */ + scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE); + memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size); + iwl_pcie_txq_build_tfd(trans, txq, + iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr), + scratch_size, 1); + + /* map first command fragment, if any remains */ + if (copy_size > scratch_size) { + phys_addr = dma_map_single(trans->dev, + ((u8 *)&out_cmd->hdr) + scratch_size, + copy_size - scratch_size, + DMA_TO_DEVICE); + if (dma_mapping_error(trans->dev, phys_addr)) { + iwl_pcie_tfd_unmap(trans, out_meta, + &txq->tfds[q->write_ptr]); + idx = -ENOMEM; + goto out; + } - phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - idx = -ENOMEM; - goto out; + iwl_pcie_txq_build_tfd(trans, txq, phys_addr, + copy_size - scratch_size, 0); } - dma_unmap_addr_set(out_meta, mapping, phys_addr); - dma_unmap_len_set(out_meta, len, dma_size); - - iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1); - /* map the remaining (adjusted) nocopy/dup fragments */ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { const void *data = cmddata[i]; @@ -1586,10 +1585,9 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_cmd_meta *out_meta; struct iwl_txq *txq; struct iwl_queue *q; - dma_addr_t phys_addr = 0; - dma_addr_t txcmd_phys; - dma_addr_t scratch_phys; - u16 len, firstlen, secondlen; + dma_addr_t tb0_phys, tb1_phys, scratch_phys; + void *tb1_addr; + u16 len, tb1_len, tb2_len; u8 wait_write_ptr = 0; __le16 fc = hdr->frame_control; u8 hdr_len = ieee80211_hdrlen(fc); @@ -1627,85 +1625,80 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | INDEX_TO_SEQ(q->write_ptr))); + tb0_phys = iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr); + scratch_phys = tb0_phys + sizeof(struct iwl_cmd_header) + + offsetof(struct iwl_tx_cmd, scratch); + + tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); + tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); + /* Set up first empty entry in queue's array of Tx/cmd buffers */ out_meta = &txq->entries[q->write_ptr].meta; /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. + * The second TB (tb1) points to the remainder of the TX command + * and the 802.11 header - dword aligned size + * (This calculation modifies the TX command, so do it before the + * setup of the first TB) */ - len = sizeof(struct iwl_tx_cmd) + - sizeof(struct iwl_cmd_header) + hdr_len; - firstlen = (len + 3) & ~3; + len = sizeof(struct iwl_tx_cmd) + sizeof(struct iwl_cmd_header) + + hdr_len - IWL_HCMD_SCRATCHBUF_SIZE; + tb1_len = (len + 3) & ~3; /* Tell NIC about any 2-byte padding after MAC header */ - if (firstlen != len) + if (tb1_len != len) tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = dma_map_single(trans->dev, - &dev_cmd->hdr, firstlen, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, txcmd_phys))) - goto out_err; - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); + /* The first TB points to the scratchbuf data - min_copy bytes */ + memcpy(&txq->scratchbufs[q->write_ptr], &dev_cmd->hdr, + IWL_HCMD_SCRATCHBUF_SIZE); + iwl_pcie_txq_build_tfd(trans, txq, tb0_phys, + IWL_HCMD_SCRATCHBUF_SIZE, 1); - if (!ieee80211_has_morefrags(fc)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } + /* there must be data left over for TB1 or this code must be changed */ + BUILD_BUG_ON(sizeof(struct iwl_tx_cmd) < IWL_HCMD_SCRATCHBUF_SIZE); + + /* map the data for TB1 */ + tb1_addr = ((u8 *)&dev_cmd->hdr) + IWL_HCMD_SCRATCHBUF_SIZE; + tb1_phys = dma_map_single(trans->dev, tb1_addr, tb1_len, DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(trans->dev, tb1_phys))) + goto out_err; + iwl_pcie_txq_build_tfd(trans, txq, tb1_phys, tb1_len, 0); - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - secondlen = skb->len - hdr_len; - if (secondlen > 0) { - phys_addr = dma_map_single(trans->dev, skb->data + hdr_len, - secondlen, DMA_TO_DEVICE); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - dma_unmap_single(trans->dev, - dma_unmap_addr(out_meta, mapping), - dma_unmap_len(out_meta, len), - DMA_BIDIRECTIONAL); + /* + * Set up TFD's third entry to point directly to remainder + * of skb, if any (802.11 null frames have no payload). + */ + tb2_len = skb->len - hdr_len; + if (tb2_len > 0) { + dma_addr_t tb2_phys = dma_map_single(trans->dev, + skb->data + hdr_len, + tb2_len, DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(trans->dev, tb2_phys))) { + iwl_pcie_tfd_unmap(trans, out_meta, + &txq->tfds[q->write_ptr]); goto out_err; } + iwl_pcie_txq_build_tfd(trans, txq, tb2_phys, tb2_len, 0); } - /* Attach buffers to TFD */ - iwl_pcie_txq_build_tfd(trans, txq, txcmd_phys, firstlen, 1); - if (secondlen > 0) - iwl_pcie_txq_build_tfd(trans, txq, phys_addr, secondlen, 0); - - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); - - /* take back ownership of DMA buffer to enable update */ - dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); - tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - /* Set up entry for this TFD in Tx byte-count array */ iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); - dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - trace_iwlwifi_dev_tx(trans->dev, skb, &txq->tfds[txq->q.write_ptr], sizeof(struct iwl_tfd), - &dev_cmd->hdr, firstlen, - skb->data + hdr_len, secondlen); + &dev_cmd->hdr, IWL_HCMD_SCRATCHBUF_SIZE + tb1_len, + skb->data + hdr_len, tb2_len); trace_iwlwifi_dev_tx_data(trans->dev, skb, - skb->data + hdr_len, secondlen); + skb->data + hdr_len, tb2_len); + + if (!ieee80211_has_morefrags(fc)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } /* start timer if queue currently empty */ if (txq->need_update && q->read_ptr == q->write_ptr && -- cgit v0.10.2 From 645e77def93f1dd0e211c7244fbe152dac8a7100 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Mar 2013 14:03:49 +0100 Subject: nl80211: increase wiphy dump size dynamically Given a device with many channels capabilities the wiphy information can still overflow even though its size in 3.9 was reduced to 3.8 levels. For new userspace and kernel 3.10 we're going to implement a new "split dump" protocol that can use multiple messages per wiphy. For now though, add a workaround to be able to send more information to userspace. Since generic netlink doesn't have a way to set the minimum dump size globally, and we wouldn't really want to set it globally anyway, increase the size only when needed, as described in the comments. As userspace might not be prepared for large buffers, we can only use 4k. Also increase the size for the get_wiphy command. Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7a7b621..d44ab21 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1307,7 +1307,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) { - int idx = 0; + int idx = 0, ret; int start = cb->args[0]; struct cfg80211_registered_device *dev; @@ -1317,9 +1317,29 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) continue; if (++idx <= start) continue; - if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - dev) < 0) { + ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + dev); + if (ret < 0) { + /* + * If sending the wiphy data didn't fit (ENOBUFS or + * EMSGSIZE returned), this SKB is still empty (so + * it's not too big because another wiphy dataset is + * already in the skb) and we've not tried to adjust + * the dump allocation yet ... then adjust the alloc + * size to be bigger, and return 1 but with the empty + * skb. This results in an empty message being RX'ed + * in userspace, but that is ignored. + * + * We can then retry with the larger buffer. + */ + if ((ret == -ENOBUFS || ret == -EMSGSIZE) && + !skb->len && + cb->min_dump_alloc < 4096) { + cb->min_dump_alloc = 4096; + mutex_unlock(&cfg80211_mutex); + return 1; + } idx--; break; } @@ -1336,7 +1356,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info) struct sk_buff *msg; struct cfg80211_registered_device *dev = info->user_ptr[0]; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + msg = nlmsg_new(4096, GFP_KERNEL); if (!msg) return -ENOMEM; -- cgit v0.10.2 From 7cbf9d017dbb5e3276de7d527925d42d4c11e732 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Fri, 1 Mar 2013 16:01:18 +0100 Subject: mac80211: fix oops on mesh PS broadcast forwarding Introduced with de74a1d9032f4d37ea453ad2a647e1aff4cd2591 "mac80211: fix WPA with VLAN on AP side with ps-sta". Apparently overwrites the sdata pointer with non-valid data in the case of mesh. Fix this by checking for IFTYPE_AP_VLAN. Signed-off-by: Marco Porsch Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c592a41..0d74f24 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2755,7 +2755,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, cpu_to_le16(IEEE80211_FCTL_MOREDATA); } - sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); if (!ieee80211_tx_prepare(sdata, &tx, skb)) break; dev_kfree_skb_any(skb); -- cgit v0.10.2 From 24af717c35189f7a83c34e637256ccb7295a617b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Mar 2013 17:33:18 +0100 Subject: mac80211: fix VHT MCS calculation The VHT MCSes we advertise to the AP were supposed to be restricted to the AP, but due to a bug in the logic mac80211 will advertise rates to the AP that aren't even supported by the local device. To fix this skip any adjustment if the NSS isn't supported at all. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b756d29..1415774 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -647,6 +647,9 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) & mask) >> shift; + if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED) + continue; + switch (ap_mcs) { default: if (our_mcs <= ap_mcs) -- cgit v0.10.2 From 801d929ca7d935ee199fd61d8ef914f51e892270 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 2 Mar 2013 19:05:47 +0100 Subject: mac80211: another fix for idle handling in monitor mode When setting a monitor interface up or down, the idle state needs to be recalculated, otherwise the hardware will just stay in its previous idle state. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 640afab..baaa860 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -541,6 +541,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) ieee80211_adjust_monitor_flags(sdata, 1); ieee80211_configure_filter(local); + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); netif_carrier_on(dev); break; @@ -812,6 +815,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_adjust_monitor_flags(sdata, -1); ieee80211_configure_filter(local); + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); break; case NL80211_IFTYPE_P2P_DEVICE: /* relies on synchronize_rcu() below */ -- cgit v0.10.2 From 715c998ff4d1106c3096bc5a48e4196663e6701a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 28 Feb 2013 08:57:31 +0200 Subject: iwlwifi: mvm: restart the NIC of the cmd queue gets full This situation is clearly an error situation and the only way to recover is to restart the driver / fw. Signed-off-by: Emmanuel Grumbach Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index aa59adf..d0f9c1e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -624,12 +624,8 @@ static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) ieee80211_free_txskb(mvm->hw, skb); } -static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) +static void iwl_mvm_nic_restart(struct iwl_mvm *mvm) { - struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); - - iwl_mvm_dump_nic_error_log(mvm); - iwl_abort_notification_waits(&mvm->notif_wait); /* @@ -663,9 +659,21 @@ static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) } } +static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode) +{ + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + + iwl_mvm_dump_nic_error_log(mvm); + + iwl_mvm_nic_restart(mvm); +} + static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode) { + struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + WARN_ON(1); + iwl_mvm_nic_restart(mvm); } static const struct iwl_op_mode_ops iwl_mvm_ops = { -- cgit v0.10.2 From e07cbb536acb249db5fd63f6884354630ae875ad Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 23:00:27 +0200 Subject: iwlwifi: mvm: Set valid TX antennas value before calib request We must set the valid TX antennas number in the ucode before sending the phy_cfg_cmd and request for calibrations. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index d3d959d..e6d51a9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -446,6 +446,11 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans); WARN_ON(ret); + /* Send TX valid antennas before triggering calibrations */ + ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant); + if (ret) + goto error; + /* Override the calibrations from TLV and the const of fw */ iwl_set_default_calib_trigger(mvm); -- cgit v0.10.2 From 6221d47cf7a57eb1e2b5b51c65e2edcde369a0d4 Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 15:55:48 +0200 Subject: iwlwifi: mvm: Take the phy_cfg from the TLV value The phy_cfg is given from the TLV value and does not have to be built by us. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index e6d51a9..d3c067e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -241,20 +241,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, return 0; } -#define IWL_HW_REV_ID_RAINBOW 0x2 -#define IWL_PROJ_TYPE_LHP 0x5 - -static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm) -{ - struct iwl_nvm_data *data = mvm->nvm_data; - /* Temp calls to static definitions, will be changed to CSR calls */ - u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW; - u8 project_type = IWL_PROJ_TYPE_LHP; - - return data->radio_cfg_dash | (data->radio_cfg_step << 2) | - (hw_rev_id << 4) | ((project_type & 0x7f) << 6) | - (data->valid_tx_ant << 16) | (data->valid_rx_ant << 20); -} static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) { @@ -262,7 +248,7 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) enum iwl_ucode_type ucode_type = mvm->cur_ucode; /* Set parameters */ - phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm)); + phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config); phy_cfg_cmd.calib_control.event_trigger = mvm->fw->default_calib[ucode_type].event_trigger; phy_cfg_cmd.calib_control.flow_trigger = -- cgit v0.10.2 From de8bc6dd2d52cacaa76ea381ffdc00919b100a2c Mon Sep 17 00:00:00 2001 From: Dor Shaish Date: Wed, 27 Feb 2013 13:01:09 +0200 Subject: iwlwifi: mvm: Remove overriding calibrations for the 7000 family This fix removes the override of calibration request values sent to the FW. Due to that, the sending of default values to now implemented calibrations is removed. Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index d3c067e..500f818 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -79,17 +79,8 @@ #define UCODE_VALID_OK cpu_to_le32(0x1) /* Default calibration values for WkP - set to INIT image w/o running */ -static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f, - 0x00, 0x18, 0x00 }; -static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, - 0x7f, 0x7f, 0x7f }; -static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 }; -static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00, - 0x00 }; -static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 }; static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 }; static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 }; -static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 }; struct iwl_calib_default_data { u16 size; @@ -99,12 +90,7 @@ struct iwl_calib_default_data { #define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf} static const struct iwl_calib_default_data wkp_calib_default_data[12] = { - [5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc), - [6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter), - [7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo), - [8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq), [9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew), - [10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq), [11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew), }; @@ -261,103 +247,6 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) sizeof(phy_cfg_cmd), &phy_cfg_cmd); } -/* Starting with the new PHY DB implementation - New calibs are enabled */ -/* Value - 0x405e7 */ -#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_BB_FILTER_IDX |\ - IWL_CALIB_CFG_LO_LEAKAGE_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_RX_IQ_IDX |\ - IWL_CALIB_CFG_AGC_IDX) - -#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0 - -/* Value 0x41567 */ -#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_BB_FILTER_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_RX_IQ_IDX |\ - IWL_CALIB_CFG_SENSITIVITY_IDX |\ - IWL_CALIB_CFG_AGC_IDX) - -#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\ - IWL_CALIB_CFG_TEMPERATURE_IDX |\ - IWL_CALIB_CFG_VOLTAGE_READ_IDX |\ - IWL_CALIB_CFG_TX_PWR_IDX |\ - IWL_CALIB_CFG_DC_IDX |\ - IWL_CALIB_CFG_TX_IQ_IDX |\ - IWL_CALIB_CFG_SENSITIVITY_IDX) - -/* - * Sets the calibrations trigger values that will be sent to the FW for runtime - * and init calibrations. - * The ones given in the FW TLV are not correct. - */ -static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm) -{ - struct iwl_tlv_calib_ctrl default_calib; - - /* - * WkP FW TLV calib bits are wrong, overwrite them. - * This defines the dynamic calibrations which are implemented in the - * uCode both for init(flow) calculation and event driven calibs. - */ - - /* Init Image */ - default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT); - default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT); - - if (default_calib.event_trigger != - mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger) - IWL_ERR(mvm, - "Updating the event calib for INIT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger, - default_calib.event_trigger); - if (default_calib.flow_trigger != - mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger) - IWL_ERR(mvm, - "Updating the flow calib for INIT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger, - default_calib.flow_trigger); - - memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT], - &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); - IWL_ERR(mvm, - "Setting uCode init calibrations event 0x%x, trigger 0x%x\n", - default_calib.event_trigger, - default_calib.flow_trigger); - - /* Run time image */ - default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN); - default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN); - - if (default_calib.event_trigger != - mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger) - IWL_ERR(mvm, - "Updating the event calib for RT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger, - default_calib.event_trigger); - if (default_calib.flow_trigger != - mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger) - IWL_ERR(mvm, - "Updating the flow calib for RT image: 0x%x -> 0x%x\n", - mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger, - default_calib.flow_trigger); - - memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR], - &default_calib, sizeof(struct iwl_tlv_calib_ctrl)); - IWL_ERR(mvm, - "Setting uCode runtime calibs event 0x%x, trigger 0x%x\n", - default_calib.event_trigger, - default_calib.flow_trigger); -} - static int iwl_set_default_calibrations(struct iwl_mvm *mvm) { u8 cmd_raw[16]; /* holds the variable size commands */ @@ -437,9 +326,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) if (ret) goto error; - /* Override the calibrations from TLV and the const of fw */ - iwl_set_default_calib_trigger(mvm); - /* WkP doesn't have all calibrations, need to set default values */ if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { ret = iwl_set_default_calibrations(mvm); -- cgit v0.10.2 From f9aa8dd33714f17c7229ad89309406a1ccb3cd3f Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 4 Mar 2013 09:11:08 +0200 Subject: iwlwifi: mvm: ignore STOP_AGG when restarting Since the device is being restarted, all the Rx / Tx Block Ack sessions are been wiped out by the driver. So ignore the requests from mac80211 that stops Tx agg while reconfiguring the device. Note that stopping a non-existing Rx BA session is harmless, so just honor mac80211's request. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 861a7f9..274f44e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -770,6 +770,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, u16 txq_id; int err; + + /* + * If mac80211 is cleaning its state, then say that we finished since + * our state has been cleared anyway. + */ + if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + return 0; + } + spin_lock_bh(&mvmsta->lock); txq_id = tid_data->txq_id; -- cgit v0.10.2 From 8101a7f0656bf11c385d6e14f52313b19f017e70 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 28 Feb 2013 11:54:28 +0200 Subject: iwlwifi: mvm: update the rssi calculation Make the rssi more accurate by taking in count per-chain AGC values. Without this, the RSSI reports inaccurate values. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 23eebda..2adb61f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -762,18 +762,20 @@ struct iwl_phy_context_cmd { #define IWL_RX_INFO_PHY_CNT 8 #define IWL_RX_INFO_AGC_IDX 1 #define IWL_RX_INFO_RSSI_AB_IDX 2 -#define IWL_RX_INFO_RSSI_C_IDX 3 -#define IWL_OFDM_AGC_DB_MSK 0xfe00 -#define IWL_OFDM_AGC_DB_POS 9 +#define IWL_OFDM_AGC_A_MSK 0x0000007f +#define IWL_OFDM_AGC_A_POS 0 +#define IWL_OFDM_AGC_B_MSK 0x00003f80 +#define IWL_OFDM_AGC_B_POS 7 +#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000 +#define IWL_OFDM_AGC_CODE_POS 20 #define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff -#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00 #define IWL_OFDM_RSSI_A_POS 0 +#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00 +#define IWL_OFDM_RSSI_ALLBAND_A_POS 8 #define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000 -#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 #define IWL_OFDM_RSSI_B_POS 16 -#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff -#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00 -#define IWL_OFDM_RSSI_C_POS 0 +#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 +#define IWL_OFDM_RSSI_ALLBAND_B_POS 24 /** * struct iwl_rx_phy_info - phy info diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 537711b..bdae700 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -80,7 +80,8 @@ #define IWL_INVALID_MAC80211_QUEUE 0xff #define IWL_MVM_MAX_ADDRESSES 2 -#define IWL_RSSI_OFFSET 44 +/* RSSI offset for WkP */ +#define IWL_RSSI_OFFSET 50 enum iwl_mvm_tx_fifo { IWL_MVM_TX_FIFO_BK = 0, diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 3f40ab0..b0b190d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -131,33 +131,42 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm, struct iwl_rx_phy_info *phy_info) { - u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db; + int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm; + int rssi_all_band_a, rssi_all_band_b; + u32 agc_a, agc_b, max_agc; u32 val; - /* Find max rssi among 3 possible receivers. + /* Find max rssi among 2 possible receivers. * These values are measured by the Digital Signal Processor (DSP). * They should stay fairly constant even as the signal strength varies, * if the radio's Automatic Gain Control (AGC) is working right. * AGC value (see below) will provide the "interesting" info. */ + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); + agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS; + agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS; + max_agc = max_t(u32, agc_a, agc_b); + val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]); rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS; rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS; - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]); - rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS; - - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); - agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS; + rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >> + IWL_OFDM_RSSI_ALLBAND_A_POS; + rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >> + IWL_OFDM_RSSI_ALLBAND_B_POS; - max_rssi = max_t(u32, rssi_a, rssi_b); - max_rssi = max_t(u32, max_rssi, rssi_c); + /* + * dBm = rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. + */ + rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a; + rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b; + max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm); - IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", - rssi_a, rssi_b, rssi_c, max_rssi, agc_db); + IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n", + rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b); - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc_db - IWL_RSSI_OFFSET; + return max_rssi_dbm; } /* -- cgit v0.10.2 From 2470b36e84a2e680d7a7e3809cbceae5bfae3606 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 3 Mar 2013 14:35:03 +0200 Subject: iwlwifi: mvm: don't warn on normal BAR sending This flow happens when we get a failed single Tx response on an AMPDU queue. In this case, the frame won't be sent any more. So we need to move the window on the recipient side. This is done by a BAR. Now if we are in the following case: 10, 12 and 13 are ACKed and 11 isn't. 10 11 12 13. V X V V Then, 11 will be sent 16 times as an MPDU (as oppsed to A-MPDU). If this failed, we are entering the flow described above. So we need to send a BAR with ssn = 12. But in this case, the scheduler will tell us to free frames up to 13 (included). So, it is perfectly possible to get a failed single Tx response on an AMPDU queue that makes the scheduler's ssn jump by more than 1 single packet. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 6b67ce3..6645efe 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -607,12 +607,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, /* Single frame failure in an AMPDU queue => send BAR */ if (txq_id >= IWL_FIRST_AMPDU_QUEUE && - !(info->flags & IEEE80211_TX_STAT_ACK)) { - /* there must be only one skb in the skb_list */ - WARN_ON_ONCE(skb_freed > 1 || - !skb_queue_empty(&skbs)); + !(info->flags & IEEE80211_TX_STAT_ACK)) info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - } /* W/A FW bug: seq_ctl is wrong when the queue is flushed */ if (status == TX_STATUS_FAIL_FIFO_FLUSHED) { -- cgit v0.10.2