From 0250ececdf6813457c98719e2d33b3684881fde0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 22 Apr 2010 19:52:16 +0200 Subject: p54pci: fix bugs in p54p_check_tx_ring Hans de Goede identified a bug in p54p_check_tx_ring: there are two ring indices. 1 => tx data and 3 => tx management. But the old code had a constant "1" and this resulted in spurious dma unmapping failures. Cc: stable@kernel.org Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623 Bug-Identified-by: Hans de Goede Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index ed4bdff..21f673d 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -245,7 +245,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, u32 idx, i; i = (*index) % ring_limit; - (*index) = idx = le32_to_cpu(ring_control->device_idx[1]); + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); idx %= ring_limit; while (i != idx) { -- cgit v0.10.2 From 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 28 Apr 2010 10:30:59 +0000 Subject: sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4) Ok, version 4 Change Notes: 1) Minor cleanups, from Vlads notes Summary: Hey- Recently, it was reported to me that the kernel could oops in the following way: <5> kernel BUG at net/core/skbuff.c:91! <5> invalid operand: 0000 [#1] <5> Modules linked in: sctp netconsole nls_utf8 autofs4 sunrpc iptable_filter ip_tables cpufreq_powersave parport_pc lp parport vmblock(U) vsock(U) vmci(U) vmxnet(U) vmmemctl(U) vmhgfs(U) acpiphp dm_mirror dm_mod button battery ac md5 ipv6 uhci_hcd ehci_hcd snd_ens1371 snd_rawmidi snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_ac97_codec snd soundcore pcnet32 mii floppy ext3 jbd ata_piix libata mptscsih mptsas mptspi mptscsi mptbase sd_mod scsi_mod <5> CPU: 0 <5> EIP: 0060:[] Not tainted VLI <5> EFLAGS: 00010216 (2.6.9-89.0.25.EL) <5> EIP is at skb_over_panic+0x1f/0x2d <5> eax: 0000002c ebx: c033f461 ecx: c0357d96 edx: c040fd44 <5> esi: c033f461 edi: df653280 ebp: 00000000 esp: c040fd40 <5> ds: 007b es: 007b ss: 0068 <5> Process swapper (pid: 0, threadinfo=c040f000 task=c0370be0) <5> Stack: c0357d96 e0c29478 00000084 00000004 c033f461 df653280 d7883180 e0c2947d <5> 00000000 00000080 df653490 00000004 de4f1ac0 de4f1ac0 00000004 df653490 <5> 00000001 e0c2877a 08000800 de4f1ac0 df653490 00000000 e0c29d2e 00000004 <5> Call Trace: <5> [] sctp_addto_chunk+0xb0/0x128 [sctp] <5> [] sctp_addto_chunk+0xb5/0x128 [sctp] <5> [] sctp_init_cause+0x3f/0x47 [sctp] <5> [] sctp_process_unk_param+0xac/0xb8 [sctp] <5> [] sctp_verify_init+0xcc/0x134 [sctp] <5> [] sctp_sf_do_5_1B_init+0x83/0x28e [sctp] <5> [] sctp_do_sm+0x41/0x77 [sctp] <5> [] cache_grow+0x140/0x233 <5> [] sctp_endpoint_bh_rcv+0xc5/0x108 [sctp] <5> [] sctp_inq_push+0xe/0x10 [sctp] <5> [] sctp_rcv+0x454/0x509 [sctp] <5> [] ipt_hook+0x17/0x1c [iptable_filter] <5> [] nf_iterate+0x40/0x81 <5> [] ip_local_deliver_finish+0x0/0x151 <5> [] ip_local_deliver_finish+0xc6/0x151 <5> [] nf_hook_slow+0x83/0xb5 <5> [] ip_local_deliver+0x1a2/0x1a9 <5> [] ip_local_deliver_finish+0x0/0x151 <5> [] ip_rcv+0x334/0x3b4 <5> [] netif_receive_skb+0x320/0x35b <5> [] init_stall_timer+0x67/0x6a [uhci_hcd] <5> [] process_backlog+0x6c/0xd9 <5> [] net_rx_action+0xfe/0x1f8 <5> [] __do_softirq+0x35/0x79 <5> [] handle_IRQ_event+0x0/0x4f <5> [] do_softirq+0x46/0x4d Its an skb_over_panic BUG halt that results from processing an init chunk in which too many of its variable length parameters are in some way malformed. The problem is in sctp_process_unk_param: if (NULL == *errp) *errp = sctp_make_op_error_space(asoc, chunk, ntohs(chunk->chunk_hdr->length)); if (*errp) { sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM, WORD_ROUND(ntohs(param.p->length))); sctp_addto_chunk(*errp, WORD_ROUND(ntohs(param.p->length)), param.v); When we allocate an error chunk, we assume that the worst case scenario requires that we have chunk_hdr->length data allocated, which would be correct nominally, given that we call sctp_addto_chunk for the violating parameter. Unfortunately, we also, in sctp_init_cause insert a sctp_errhdr_t structure into the error chunk, so the worst case situation in which all parameters are in violation requires chunk_hdr->length+(sizeof(sctp_errhdr_t)*param_count) bytes of data. The result of this error is that a deliberately malformed packet sent to a listening host can cause a remote DOS, described in CVE-2010-1173: http://cve.mitre.org/cgi-bin/cvename.cgi?name=2010-1173 I've tested the below fix and confirmed that it fixes the issue. We move to a strategy whereby we allocate a fixed size error chunk and ignore errors we don't have space to report. Tested by me successfully Signed-off-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index ff30177..597f8e2 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len, struct iovec *data); void sctp_chunk_free(struct sctp_chunk *); void *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data); +void *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data); struct sctp_chunk *sctp_chunkify(struct sk_buff *, const struct sctp_association *, struct sock *); diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 0fd5b4c..30c1767 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = { cpu_to_be16(sizeof(struct sctp_paramhdr)), }; -/* A helper to initialize to initialize an op error inside a +/* A helper to initialize an op error inside a * provided chunk, as most cause codes will be embedded inside an * abort chunk. */ @@ -125,6 +125,29 @@ void sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code, chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err); } +/* A helper to initialize an op error inside a + * provided chunk, as most cause codes will be embedded inside an + * abort chunk. Differs from sctp_init_cause in that it won't oops + * if there isn't enough space in the op error chunk + */ +int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code, + size_t paylen) +{ + sctp_errhdr_t err; + __u16 len; + + /* Cause code constants are now defined in network order. */ + err.cause = cause_code; + len = sizeof(sctp_errhdr_t) + paylen; + err.length = htons(len); + + if (skb_tailroom(chunk->skb) > len) + return -ENOSPC; + chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk, + sizeof(sctp_errhdr_t), + &err); + return 0; +} /* 3.3.2 Initiation (INIT) (1) * * This chunk is used to initiate a SCTP association between two @@ -1132,6 +1155,24 @@ nodata: return retval; } +/* Create an Operation Error chunk of a fixed size, + * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT) + * This is a helper function to allocate an error chunk for + * for those invalid parameter codes in which we may not want + * to report all the errors, if the incomming chunk is large + */ +static inline struct sctp_chunk *sctp_make_op_error_fixed( + const struct sctp_association *asoc, + const struct sctp_chunk *chunk) +{ + size_t size = asoc ? asoc->pathmtu : 0; + + if (!size) + size = SCTP_DEFAULT_MAXSEGMENT; + + return sctp_make_op_error_space(asoc, chunk, size); +} + /* Create an Operation Error chunk. */ struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc, const struct sctp_chunk *chunk, @@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data) return target; } +/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient + * space in the chunk + */ +void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk, + int len, const void *data) +{ + if (skb_tailroom(chunk->skb) > len) + return sctp_addto_chunk(chunk, len, data); + else + return NULL; +} + /* Append bytes from user space to the end of a chunk. Will panic if * chunk is not big enough. * Returns a kernel err value. @@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc, * returning multiple unknown parameters. */ if (NULL == *errp) - *errp = sctp_make_op_error_space(asoc, chunk, - ntohs(chunk->chunk_hdr->length)); + *errp = sctp_make_op_error_fixed(asoc, chunk); if (*errp) { - sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM, + sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM, WORD_ROUND(ntohs(param.p->length))); - sctp_addto_chunk(*errp, + sctp_addto_chunk_fixed(*errp, WORD_ROUND(ntohs(param.p->length)), param.v); } else { -- cgit v0.10.2 From 03f80cc3f24e1dcdbdba081ed5daf5575aac6180 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 28 Apr 2010 09:57:01 +0000 Subject: net/sb1250: register mdio bus in probe "ifconfig eth0 up && ifconfig eth0 down" triggers: | kobject (a8000000cfa5a480): tried to init an initialized object, something is seriously wrong. | Call Trace: | [] dump_stack+0x8/0x34 | [] kobject_init+0xe8/0xf0 | [] device_initialize+0x2c/0x98 | [] device_register+0x14/0x28 | [] mdiobus_register+0xdc/0x1e0 | [] sbmac_open+0x58/0x220 | [] __dev_open+0x11c/0x180 | [] __dev_change_flags+0x120/0x180 | [] dev_change_flags+0x20/0x78 | [] devinet_ioctl+0x7cc/0x820 | [] sock_do_ioctl+0x38/0x90 | [] compat_sock_ioctl_trans+0x408/0x1030 | [] compat_sock_ioctl+0xb0/0xd0 | [] compat_sys_ioctl+0xa0/0x18b8 | [] handle_sys+0x114/0x130 | | sb1250-mac-mdio: probed mdiobus_register() calls device_register() which initializes the kobj of the device. mdiobus_unregister() calls only device_del() so we have one reference left. That one is leaving with mdiobus_free() which is only called on remove. Since I don't see any reason why mdiobus_register()/mdiobus_unregister() should happen in ->open()/->close() I move them to probe & exit. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 9944e5d..04efc0c 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base) sc->mii_bus = mdiobus_alloc(); if (sc->mii_bus == NULL) { - sbmac_uninitctx(sc); - return -ENOMEM; + err = -ENOMEM; + goto uninit_ctx; } + sc->mii_bus->name = sbmac_mdio_string; + snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); + sc->mii_bus->priv = sc; + sc->mii_bus->read = sbmac_mii_read; + sc->mii_bus->write = sbmac_mii_write; + sc->mii_bus->irq = sc->phy_irq; + for (i = 0; i < PHY_MAX_ADDR; ++i) + sc->mii_bus->irq[i] = SBMAC_PHY_INT; + + sc->mii_bus->parent = &pldev->dev; + /* + * Probe PHY address + */ + err = mdiobus_register(sc->mii_bus); + if (err) { + printk(KERN_ERR "%s: unable to register MDIO bus\n", + dev->name); + goto free_mdio; + } + dev_set_drvdata(&pldev->dev, sc->mii_bus); + err = register_netdev(dev); if (err) { printk(KERN_ERR "%s.%d: unable to register netdev\n", sbmac_string, idx); - mdiobus_free(sc->mii_bus); - sbmac_uninitctx(sc); - return err; + goto unreg_mdio; } pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); @@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base) pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", dev->name, base, eaddr); - sc->mii_bus->name = sbmac_mdio_string; - snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); - sc->mii_bus->priv = sc; - sc->mii_bus->read = sbmac_mii_read; - sc->mii_bus->write = sbmac_mii_write; - sc->mii_bus->irq = sc->phy_irq; - for (i = 0; i < PHY_MAX_ADDR; ++i) - sc->mii_bus->irq[i] = SBMAC_PHY_INT; - - sc->mii_bus->parent = &pldev->dev; - dev_set_drvdata(&pldev->dev, sc->mii_bus); - return 0; +unreg_mdio: + mdiobus_unregister(sc->mii_bus); + dev_set_drvdata(&pldev->dev, NULL); +free_mdio: + mdiobus_free(sc->mii_bus); +uninit_ctx: + sbmac_uninitctx(sc); + return err; } @@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev) goto out_err; } - /* - * Probe PHY address - */ - err = mdiobus_register(sc->mii_bus); - if (err) { - printk(KERN_ERR "%s: unable to register MDIO bus\n", - dev->name); - goto out_unirq; - } - sc->sbm_speed = sbmac_speed_none; sc->sbm_duplex = sbmac_duplex_none; sc->sbm_fc = sbmac_fc_none; @@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev) return 0; out_unregister: - mdiobus_unregister(sc->mii_bus); - -out_unirq: free_irq(dev->irq, dev); - out_err: return err; } @@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev) phy_disconnect(sc->phy_dev); sc->phy_dev = NULL; - - mdiobus_unregister(sc->mii_bus); - free_irq(dev->irq, dev); sbdma_emptyring(&(sc->sbm_txdma)); @@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev) unregister_netdev(dev); sbmac_uninitctx(sc); + mdiobus_unregister(sc->mii_bus); mdiobus_free(sc->mii_bus); iounmap(sc->sbm_base); free_netdev(dev); -- cgit v0.10.2 From 0c75ba22541ccea88e89782373991109a7ec2a54 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 28 Apr 2010 21:46:06 +0000 Subject: e1000e: Fix oops caused by ASPM patch. Commit 6f461f6c7c961f0b1b73c0f27becf472a0ac606b ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") oopses on one of my ppc64 boxes with a NULL pointer (0x4a): Unable to handle kernel paging request for data at address 0x0000004a Faulting instruction address: 0xc0000000004d2f1c cpu 0xe: Vector: 300 (Data Access) at [c000000bec1833a0] pc: c0000000004d2f1c: .e1000e_disable_aspm+0xe0/0x150 lr: c0000000004d2f0c: .e1000e_disable_aspm+0xd0/0x150 dar: 4a [c000000bec1836d0] c00000000069b9d8 .e1000_probe+0x84/0xe8c [c000000bec1837b0] c000000000386d90 .local_pci_probe+0x4c/0x68 [c000000bec183840] c0000000003872ac .pci_device_probe+0xfc/0x148 [c000000bec183900] c000000000409e8c .driver_probe_device+0xe4/0x1d0 [c000000bec1839a0] c00000000040a024 .__driver_attach+0xac/0xf4 [c000000bec183a40] c000000000409124 .bus_for_each_dev+0x9c/0x10c [c000000bec183b00] c000000000409c1c .driver_attach+0x40/0x60 [c000000bec183b90] c0000000004085dc .bus_add_driver+0x150/0x328 [c000000bec183c40] c00000000040a58c .driver_register+0x100/0x1c4 [c000000bec183cf0] c00000000038764c .__pci_register_driver+0x78/0x128 Seems like pdev->bus->self == NULL. I haven't touched pci in a long time so I'm trying to remember what this means (no pcie bridge perhaps?) The patch below fixes the oops for me. Signed-off-by: Anton Blanchard Reviewed-by: Bruce Allan Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index fb8fc7d..dbf8178 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) reg16 &= ~state; pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + if (!pdev->bus->self) + return; + pos = pci_pcie_cap(pdev->bus->self); pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); reg16 &= ~state; -- cgit v0.10.2 From 6c3b9d3458a8272f1e4c6aed9e8325136f6380f9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 30 Apr 2010 16:20:39 -0700 Subject: r8169: Fix rtl8169_rx_interrupt() In case a reset is performed, rtl8169_rx_interrupt() is called from process context instead of softirq context. Special care must be taken to call appropriate network core services (netif_rx() instead of netif_receive_skb()). VLAN handling also corrected. Reported-by: Sergey Senozhatsky Tested-by: Sergey Senozhatsky Diagnosed-by: Oleg Nesterov Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 4748c21..dd8106f 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { u32 opts2 = le32_to_cpu(desc->opts2); struct vlan_group *vlgrp = tp->vlgrp; int ret; if (vlgrp && (opts2 & RxVlanTag)) { - vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff)); + __vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling); ret = 0; } else ret = -1; @@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { return -1; } @@ -4445,12 +4445,20 @@ out: return done; } +/* + * Warning : rtl8169_rx_interrupt() might be called : + * 1) from NAPI (softirq) context + * (polling = 1 : we should call netif_receive_skb()) + * 2) from process context (rtl8169_reset_task()) + * (polling = 0 : we must call netif_rx() instead) + */ static int rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, void __iomem *ioaddr, u32 budget) { unsigned int cur_rx, rx_left; unsigned int delta, count; + int polling = (budget != ~(u32)0) ? 1 : 0; cur_rx = tp->cur_rx; rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; @@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev, skb_put(skb, pkt_size); skb->protocol = eth_type_trans(skb, dev); - if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0) - netif_receive_skb(skb); + if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) { + if (likely(polling)) + netif_receive_skb(skb); + else + netif_rx(skb); + } dev->stats.rx_bytes += pkt_size; dev->stats.rx_packets++; -- cgit v0.10.2 From 2fdc45c7c4c283bc6882de20d2d887dc3bfdd899 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Fri, 30 Apr 2010 19:05:28 -0700 Subject: net/usb: remove default in Kconfig for sierra_net driver The following patch removes the default from the Kconfig entry for sierra_net driver as recommended. Signed-off-by: Elina Pasheva Signed-off-by: Rory Filer Signed-off-by: David S. Miller diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 5d58abc..d7b7018 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -400,7 +400,6 @@ config USB_IPHETH config USB_SIERRA_NET tristate "USB-to-WWAN Driver for Sierra Wireless modems" depends on USB_USBNET - default y help Choose this option if you have a Sierra Wireless USB-to-WWAN device. -- cgit v0.10.2 From 6f1464bf65fcaa57a4b32dae93de4e8bbdfaf7c5 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Wed, 28 Apr 2010 13:28:24 +0000 Subject: net/usb: initiate sync sequence in sierra_net.c driver The following patch adds the initiation of the sync sequence to "sierra_net_bind()". If this step is omitted, the modem will never sync up with the host and it will not be possible to establish a data connection. Signed-off-by: Elina Pasheva Signed-off-by: Rory Filer Tested-by: Elina Pasheva Signed-off-by: David S. Miller diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index a44f9e0..f1942d6 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) /* prepare sync message from template */ memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); + /* initiate the sync sequence */ + sierra_net_dosync(dev); + return 0; } -- cgit v0.10.2 From 1183f3838c588545592c042c0ce15015661ce7f2 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 2 May 2010 13:42:39 -0700 Subject: net: fix compile error due to double return type in SOCK_DEBUG Fix this one: include/net/sock.h: error: two or more data types in declaration specifiers Signed-off-by: Jan Engelhardt Signed-off-by: David S. Miller diff --git a/include/net/sock.h b/include/net/sock.h index b4603cd..1ad6435 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -74,7 +74,7 @@ printk(KERN_DEBUG msg); } while (0) #else /* Validate arguments and do nothing */ -static void inline int __attribute__ ((format (printf, 2, 3))) +static inline void __attribute__ ((format (printf, 2, 3))) SOCK_DEBUG(struct sock *sk, const char *msg, ...) { } -- cgit v0.10.2 From ea8420e9f5dff7324607671f0b7ab7fbf726339d Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 3 May 2010 10:19:33 +0000 Subject: ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid In ppp_input(), PPP_PROTO(skb) may refer to invalid data in the skb. If this happens and (proto >= 0xc000 || proto == PPP_CCPFRAG) then the packet is passed directly to pppd. This occurs frequently when using PPPoE with an interface MTU greater than 1500 because the skb is more likely to be non-linear. The next 2 bytes need to be pulled in ppp_input(). The pull of 2 bytes in ppp_receive_frame() has been removed as it is no longer required. Signed-off-by: Simon Arlott Signed-off-by: David S. Miller diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 6e281bc..75e8903 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1567,13 +1567,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) struct channel *pch = chan->ppp; int proto; - if (!pch || skb->len == 0) { + if (!pch) { kfree_skb(skb); return; } - proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); + if (!pskb_may_pull(skb, 2)) { + kfree_skb(skb); + if (pch->ppp) { + ++pch->ppp->dev->stats.rx_length_errors; + ppp_receive_error(pch->ppp); + } + goto done; + } + + proto = PPP_PROTO(skb); if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) { /* put it on the channel queue */ skb_queue_tail(&pch->file.rq, skb); @@ -1585,6 +1594,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) } else { ppp_do_recv(pch->ppp, skb, pch); } + +done: read_unlock_bh(&pch->upl); } @@ -1617,7 +1628,8 @@ ppp_input_error(struct ppp_channel *chan, int code) static void ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { - if (pskb_may_pull(skb, 2)) { + /* note: a 0-length skb is used as an error indication */ + if (skb->len > 0) { #ifdef CONFIG_PPP_MULTILINK /* XXX do channel-level decompression here */ if (PPP_PROTO(skb) == PPP_MP) @@ -1625,15 +1637,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) else #endif /* CONFIG_PPP_MULTILINK */ ppp_receive_nonmp_frame(ppp, skb); - return; + } else { + kfree_skb(skb); + ppp_receive_error(ppp); } - - if (skb->len > 0) - /* note: a 0-length skb is used as an error indication */ - ++ppp->dev->stats.rx_length_errors; - - kfree_skb(skb); - ppp_receive_error(ppp); } static void -- cgit v0.10.2 From 19937d0482cfe194fe52e97e59aa58ec911de0d1 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 3 May 2010 10:20:27 +0000 Subject: ppp_generic: handle non-linear skbs when passing them to pppd Frequently when using PPPoE with an interface MTU greater than 1500, the skb is likely to be non-linear. If the skb needs to be passed to pppd then the skb data must be read correctly. The previous commit fixes an issue with accidentally sending skbs to pppd based on an invalid read of the protocol type. When that error occurred pppd was reading invalid skb data too. Signed-off-by: Simon Arlott Signed-off-by: David S. Miller diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 75e8903..8518a2e 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf, DECLARE_WAITQUEUE(wait, current); ssize_t ret; struct sk_buff *skb = NULL; + struct iovec iov; ret = count; @@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf, if (skb->len > count) goto outf; ret = -EFAULT; - if (copy_to_user(buf, skb->data, skb->len)) + iov.iov_base = buf; + iov.iov_len = count; + if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len)) goto outf; ret = skb->len; -- cgit v0.10.2 From e9162ab1610531d6ea6c1833daeb2613e44275e8 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 3 May 2010 10:01:26 +0000 Subject: dm9601: fix phy/eeprom write routine Use correct bit positions in DM_SHARED_CTRL register for writes. Michael Planes recently encountered a 'KY-RS9600 USB-LAN converter', which came with a driver CD containing a Linux driver. This driver turns out to be a copy of dm9601.c with symbols renamed and my copyright stripped. That aside, it did contain 1 functional change in dm_write_shared_word(), and after checking the datasheet the original value was indeed wrong (read versus write bits). On Michaels HW, this change bumps receive speed from ~30KB/s to ~900KB/s. On other devices the difference is less spectacular, but still significant (~30%). Reported-by: Michael Planes CC: stable@kernel.org Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 04b2810..5dfed92 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu goto out; dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); - dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14); + dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12); for (i = 0; i < DM_TIMEOUT; i++) { u8 tmp; -- cgit v0.10.2 From d05070091849015f8c5b7d55cd75b86ebb61b3ec Mon Sep 17 00:00:00 2001 From: "David J. Choi" Date: Thu, 29 Apr 2010 06:12:41 +0000 Subject: drivers/net/phy: micrel phy driver This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi Signed-off-by: David S. Miller diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index fc5938ba..a527e37 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -88,6 +88,11 @@ config LSI_ET1011C_PHY ---help--- Supports the LSI ET1011C PHY. +config MICREL_PHY + tristate "Driver for Micrel PHYs" + ---help--- + Supports the KSZ9021, VSC8201, KS8001 PHYs. + config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB=y diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1342585..13bebab 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c new file mode 100644 index 0000000..0cd80e4 --- /dev/null +++ b/drivers/net/phy/micrel.c @@ -0,0 +1,104 @@ +/* + * drivers/net/phy/micrel.c + * + * Driver for Micrel PHYs + * + * Author: David J. Choi + * + * Copyright (c) 2010 Micrel, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Support : ksz9021 , vsc8201, ks8001 + */ + +#include +#include +#include + +#define PHY_ID_KSZ9021 0x00221611 +#define PHY_ID_VSC8201 0x000FC413 +#define PHY_ID_KS8001 0x0022161A + + +static int kszphy_config_init(struct phy_device *phydev) +{ + return 0; +} + + +static struct phy_driver ks8001_driver = { + .phy_id = PHY_ID_KS8001, + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver vsc8201_driver = { + .phy_id = PHY_ID_VSC8201, + .name = "Micrel VSC8201", + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ksz9021_driver = { + .phy_id = PHY_ID_KSZ9021, + .phy_id_mask = 0x000fff10, + .name = "Micrel KSZ9021 Gigabit PHY", + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, +}; + +static int __init ksphy_init(void) +{ + int ret; + + ret = phy_driver_register(&ks8001_driver); + if (ret) + goto err1; + ret = phy_driver_register(&vsc8201_driver); + if (ret) + goto err2; + + ret = phy_driver_register(&ksz9021_driver); + if (ret) + goto err3; + return 0; + +err3: + phy_driver_unregister(&vsc8201_driver); +err2: + phy_driver_unregister(&ks8001_driver); +err1: + return ret; +} + +static void __exit ksphy_exit(void) +{ + phy_driver_unregister(&ks8001_driver); + phy_driver_unregister(&vsc8201_driver); + phy_driver_unregister(&ksz9021_driver); +} + +module_init(ksphy_init); +module_exit(ksphy_exit); + +MODULE_DESCRIPTION("Micrel PHY driver"); +MODULE_AUTHOR("David J. Choi"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 1827d2e943eeb5cba0662f3e6edc342d6bd65ae6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 May 2010 23:21:27 -0700 Subject: net: ep93xx_eth stops receiving packets Receiving small packet(s) in a fast pace leads to not receiving any packets at all after some time. After ethernet packet(s) arrived the receive descriptor is incremented by the number of frames processed. If another packet arrives while processing, this is processed in another call of ep93xx_rx. This second call leads that too many receive descriptors getting released. This fix increments, even in these case, the right number of processed receive descriptors. Signed-off-by: Stefan Agner Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 6995169..cd17d09 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -311,11 +311,6 @@ err: processed++; } - if (processed) { - wrw(ep, REG_RXDENQ, processed); - wrw(ep, REG_RXSTSENQ, processed); - } - return processed; } @@ -350,6 +345,11 @@ poll_some_more: goto poll_some_more; } + if (rx) { + wrw(ep, REG_RXDENQ, rx); + wrw(ep, REG_RXSTSENQ, rx); + } + return rx; } -- cgit v0.10.2 From f935aa9e99d6ec74a50871c120e6b21de7256efb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 May 2010 23:42:27 -0700 Subject: ipv6: Fix default multicast hops setting. As per RFC 3493 the default multicast hops setting for a socket should be "1" just like ipv4. Ironically we have a IPV6_DEFAULT_MCASTHOPS macro it just wasn't being used. Reported-by: Elliot Hughes Signed-off-by: David S. Miller diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3192aa0..3f9e86b 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -200,7 +200,7 @@ lookup_protocol: inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk); np->hop_limit = -1; - np->mcast_hops = -1; + np->mcast_hops = IPV6_DEFAULT_MCASTHOPS; np->mc_loop = 1; np->pmtudisc = IPV6_PMTUDISC_WANT; np->ipv6only = net->ipv6.sysctl.bindv6only; -- cgit v0.10.2 From 7cff0943a1104479fc9fc2d6ced24c02ba81e73e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mattias=20Walstr=C3=B6m?= Date: Wed, 5 May 2010 00:55:48 -0700 Subject: FEC: Fix kernel panic in fec_set_mac_address. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix memory corruption that sometimes result in kernel panic. Signed-off-by: Mattias Walström Signed-off-by: David S. Miller diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 9f98c1c..9b4e8f7 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p) (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), fep->hwp + FEC_ADDR_LOW); writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), - fep + FEC_ADDR_HIGH); + fep->hwp + FEC_ADDR_HIGH); return 0; } -- cgit v0.10.2