From 210bbd38bb88989ce19208f98e530ff0468f38bd Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Tue, 6 Sep 2016 02:17:14 +0800 Subject: arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs Add the interrupts cells value for 4, and the 4th cell is zero. Due to the doc[0] said:" the system requires describing PPI affinity, then the value must be at least 4" The 4th cell is a phandle to a node describing a set of CPUs this interrupt is affine to. The interrupt must be a PPI, and the node pointed must be a subnode of the "ppi-partitions" subnode. For interrupt types other than PPI or PPIs that are not partitionned, this cell must be zero. See the "ppi-partitions" node description below. [0]: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt Signed-off-by: Caesar Wang Acked-by: Mark Rutland Signed-off-by: Heiko Stuebner diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 6c89d77..529c327 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -160,10 +160,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; xin24m: xin24m { @@ -182,8 +182,8 @@ dmac_bus: dma-controller@ff6d0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = , - ; + interrupts = , + ; #dma-cells = <1>; clocks = <&cru ACLK_DMAC0_PERILP>; clock-names = "apb_pclk"; @@ -192,8 +192,8 @@ dmac_peri: dma-controller@ff6e0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = , - ; + interrupts = , + ; #dma-cells = <1>; clocks = <&cru ACLK_DMAC1_PERILP>; clock-names = "apb_pclk"; @@ -204,7 +204,7 @@ compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; - interrupts = ; + interrupts = ; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; @@ -217,7 +217,7 @@ compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; - interrupts = ; + interrupts = ; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; @@ -229,7 +229,7 @@ sdhci: sdhci@fe330000 { compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = ; + interrupts = ; arasan,soc-ctl-syscon = <&grf>; assigned-clocks = <&cru SCLK_EMMC>; assigned-clock-rates = <200000000>; @@ -284,7 +284,7 @@ usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; - interrupts = ; + interrupts = ; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; clock-names = "hclk_host0", "hclk_host0_arb"; phys = <&u2phy0_host>; @@ -295,7 +295,7 @@ usb_host0_ohci: usb@fe3a0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3a0000 0x0 0x20000>; - interrupts = ; + interrupts = ; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; clock-names = "hclk_host0", "hclk_host0_arb"; status = "disabled"; @@ -304,7 +304,7 @@ usb_host1_ehci: usb@fe3c0000 { compatible = "generic-ehci"; reg = <0x0 0xfe3c0000 0x0 0x20000>; - interrupts = ; + interrupts = ; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; clock-names = "hclk_host1", "hclk_host1_arb"; phys = <&u2phy1_host>; @@ -315,7 +315,7 @@ usb_host1_ohci: usb@fe3e0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3e0000 0x0 0x20000>; - interrupts = ; + interrupts = ; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; clock-names = "hclk_host1", "hclk_host1_arb"; status = "disabled"; @@ -323,7 +323,7 @@ gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; + #interrupt-cells = <4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -334,7 +334,7 @@ <0x0 0xfff00000 0 0x10000>, /* GICC */ <0x0 0xfff10000 0 0x10000>, /* GICH */ <0x0 0xfff20000 0 0x10000>; /* GICV */ - interrupts = ; + interrupts = ; its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; @@ -345,7 +345,7 @@ saradc: saradc@ff100000 { compatible = "rockchip,rk3399-saradc"; reg = <0x0 0xff100000 0x0 0x100>; - interrupts = ; + interrupts = ; #io-channel-cells = <1>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; @@ -361,7 +361,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c1_xfer>; #address-cells = <1>; @@ -376,7 +376,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c2_xfer>; #address-cells = <1>; @@ -391,7 +391,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c3_xfer>; #address-cells = <1>; @@ -406,7 +406,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c5_xfer>; #address-cells = <1>; @@ -421,7 +421,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c6_xfer>; #address-cells = <1>; @@ -436,7 +436,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c7_xfer>; #address-cells = <1>; @@ -449,7 +449,7 @@ reg = <0x0 0xff180000 0x0 0x100>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; - interrupts = ; + interrupts = ; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -462,7 +462,7 @@ reg = <0x0 0xff190000 0x0 0x100>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; - interrupts = ; + interrupts = ; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -475,7 +475,7 @@ reg = <0x0 0xff1a0000 0x0 0x100>; clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; - interrupts = ; + interrupts = ; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -488,7 +488,7 @@ reg = <0x0 0xff1b0000 0x0 0x100>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; - interrupts = ; + interrupts = ; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -501,7 +501,7 @@ reg = <0x0 0xff1c0000 0x0 0x1000>; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; #address-cells = <1>; @@ -514,7 +514,7 @@ reg = <0x0 0xff1d0000 0x0 0x1000>; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; #address-cells = <1>; @@ -527,7 +527,7 @@ reg = <0x0 0xff1e0000 0x0 0x1000>; clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; #address-cells = <1>; @@ -540,7 +540,7 @@ reg = <0x0 0xff1f0000 0x0 0x1000>; clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; #address-cells = <1>; @@ -553,7 +553,7 @@ reg = <0x0 0xff200000 0x0 0x1000>; clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; #address-cells = <1>; @@ -633,7 +633,7 @@ tsadc: tsadc@ff260000 { compatible = "rockchip,rk3399-tsadc"; reg = <0x0 0xff260000 0x0 0x100>; - interrupts = ; + interrupts = ; assigned-clocks = <&cru SCLK_TSADC>; assigned-clock-rates = <750000>; clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; @@ -864,7 +864,7 @@ reg = <0x0 0xff350000 0x0 0x1000>; clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; clock-names = "spiclk", "apb_pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; #address-cells = <1>; @@ -877,7 +877,7 @@ reg = <0x0 0xff370000 0x0 0x100>; clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; clock-names = "baudclk", "apb_pclk"; - interrupts = ; + interrupts = ; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -892,7 +892,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c0_xfer>; #address-cells = <1>; @@ -907,7 +907,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c4_xfer>; #address-cells = <1>; @@ -922,7 +922,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; clock-names = "i2c", "pclk"; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c8_xfer>; #address-cells = <1>; @@ -1057,7 +1057,7 @@ u2phy0_host: host-port { #phy-cells = <0>; - interrupts = ; + interrupts = ; interrupt-names = "linestate"; status = "disabled"; }; @@ -1074,7 +1074,7 @@ u2phy1_host: host-port { #phy-cells = <0>; - interrupts = ; + interrupts = ; interrupt-names = "linestate"; status = "disabled"; }; @@ -1104,13 +1104,13 @@ compatible = "snps,dw-wdt"; reg = <0x0 0xff848000 0x0 0x100>; clocks = <&cru PCLK_WDT>; - interrupts = ; + interrupts = ; }; rktimer: rktimer@ff850000 { compatible = "rockchip,rk3399-timer"; reg = <0x0 0xff850000 0x0 0x1000>; - interrupts = ; + interrupts = ; clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; clock-names = "pclk", "timer"; }; @@ -1118,7 +1118,7 @@ spdif: spdif@ff870000 { compatible = "rockchip,rk3399-spdif"; reg = <0x0 0xff870000 0x0 0x1000>; - interrupts = ; + interrupts = ; dmas = <&dmac_bus 7>; dma-names = "tx"; clock-names = "mclk", "hclk"; @@ -1132,7 +1132,7 @@ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff880000 0x0 0x1000>; rockchip,grf = <&grf>; - interrupts = ; + interrupts = ; dmas = <&dmac_bus 0>, <&dmac_bus 1>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -1145,7 +1145,7 @@ i2s1: i2s@ff890000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x1000>; - interrupts = ; + interrupts = ; dmas = <&dmac_bus 2>, <&dmac_bus 3>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -1158,7 +1158,7 @@ i2s2: i2s@ff8a0000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff8a0000 0x0 0x1000>; - interrupts = ; + interrupts = ; dmas = <&dmac_bus 4>, <&dmac_bus 5>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -1178,7 +1178,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff720000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO0_PMU>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <0x2>; @@ -1191,7 +1191,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff730000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO1_PMU>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <0x2>; @@ -1204,7 +1204,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <0x2>; @@ -1217,7 +1217,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff788000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <0x2>; @@ -1230,7 +1230,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO4>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <0x2>; -- cgit v0.10.2