From 646cccb55b26b95b981ea9a63512260d0c21cac3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 16:41:39 -0400 Subject: drm/amdgpu: add support for new smc firmware on tonga Newer tonga parts require new smc firmware. Reviewed-by: Huang Rui Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 7a8bfa3..d1267ea 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -798,7 +798,11 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: - strcpy(fw_name, "amdgpu/tonga_smc.bin"); + if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || + ((adev->pdev->device == 0x6938) && (adev->pdev->revision == 0xf1))) + strcpy(fw_name, "amdgpu/tonga_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/tonga_smc.bin"); break; case CHIP_FIJI: strcpy(fw_name, "amdgpu/fiji_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 7c13090..12404fc 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -81,6 +81,7 @@ MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); +MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); -- cgit v0.10.2 From 3b496626ee8f07919256a4e99cddf42ecd4ba891 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Oct 2016 18:33:00 -0400 Subject: drm/amdgpu: add support for new smc firmware on iceland Newer iceland parts require new smc firmware. Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index d1267ea..6629762 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -795,7 +795,12 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, if (!adev->pm.fw) { switch (adev->asic_type) { case CHIP_TOPAZ: - strcpy(fw_name, "amdgpu/topaz_smc.bin"); + if (((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x81)) || + ((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x83)) || + ((adev->pdev->device == 0x6907) && (adev->pdev->revision == 0x87))) + strcpy(fw_name, "amdgpu/topaz_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 12404fc..f62f1a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -80,6 +80,7 @@ #include "dce_virtual.h" MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); +MODULE_FIRMWARE("amdgpu/topaz_k_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); -- cgit v0.10.2 From 066f1f0b4719eb4573ef09bfc63c2bbb6f7676ca Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 10:41:49 -0400 Subject: drm/radeon: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index eb92aef..621af06 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -104,6 +104,14 @@ static const char radeon_family_name[][16] = { "LAST", }; +#if defined(CONFIG_VGA_SWITCHEROO) +bool radeon_has_atpx_dgpu_power_cntl(void); +bool radeon_is_atpx_hybrid(void); +#else +static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool radeon_is_atpx_hybrid(void) { return false; } +#endif + #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -160,6 +168,11 @@ static void radeon_device_handle_px_quirks(struct radeon_device *rdev) if (rdev->px_quirk_flags & RADEON_PX_QUIRK_DISABLE_PX) rdev->flags &= ~RADEON_IS_PX; + + /* disable PX is the system doesn't support dGPU power control or hybrid gfx */ + if (!radeon_is_atpx_hybrid() && + !radeon_has_atpx_dgpu_power_cntl()) + rdev->flags &= ~RADEON_IS_PX; } /** -- cgit v0.10.2 From 84b1528e8cef55274f0df20e93513b3060ce495a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 11:02:31 -0400 Subject: drm/amdgpu: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 203d98b..3938fca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -99,6 +99,8 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags) if ((amdgpu_runtime_pm != 0) && amdgpu_has_atpx() && + (amdgpu_is_atpx_hybrid() || + amdgpu_has_atpx_dgpu_power_cntl()) && ((flags & AMD_IS_APU) == 0)) flags |= AMD_IS_PX; -- cgit v0.10.2 From 0a6e21056eaa859353945c4b164f3ef574d84271 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 31 Oct 2016 12:19:39 -0400 Subject: drm/radeon: Fix kernel panic on shutdown Since commit a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks"), a Dell Latitude D600 laptop has crashed on shutdown. The PCI Identification of the graphics adapter is "VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01)". Prior to commit b0c80bd5d2e3 ("drm/radeon: fix up dp aux tear down (v2)"), I have no idea where the panic happened as the screen was blanked before the crash. Since that more recent change, the panic has been in routine radeon_connector_unregister(), and has been shown to be due to a NULL value in the ddc_bus member of struct drm_connector. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=178421 Fixes: a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks") Signed-off-by: Larry Finger Cc: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e18839d..27affbd 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -931,7 +931,7 @@ static void radeon_connector_unregister(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); - if (radeon_connector->ddc_bus->has_aux) { + if (radeon_connector->ddc_bus && radeon_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); radeon_connector->ddc_bus->has_aux = false; } -- cgit v0.10.2 From eef2b41122425dbddd16d70371bd000f601161d6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 12:27:52 -0400 Subject: drm/amdgpu: make sure ddc_bus is valid in connector unregister This should only happen on boards TV connectors which do not have a ddc bus for those connectors. None of the asics supported by amdgpu support tv, so we shouldn't hit this, but check to be on the safe side (e.g., bios bug for example). Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e3281d4..086aa5c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -769,7 +769,7 @@ static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); - if (amdgpu_connector->ddc_bus->has_aux) { + if (amdgpu_connector->ddc_bus && amdgpu_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } -- cgit v0.10.2 From 91efdb2718e0c5ff014f0cf98cac99f088a9a4d2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 29 Oct 2016 23:32:44 +0300 Subject: drm/amd/powerplay: don't succeed in getters if fan is missing Otherwise callers end up using uninitialized data. Reviewed-by: Edward O'Callaghan Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c index fb6c6f6..29d0319 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c @@ -30,7 +30,7 @@ int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) { if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; fan_speed_info->supports_percent_read = true; fan_speed_info->supports_percent_write = true; @@ -60,7 +60,7 @@ int smu7_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint64_t tmp64; if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); @@ -89,7 +89,7 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) if (hwmgr->thermal_controller.fanInfo.bNoFan || (hwmgr->thermal_controller.fanInfo. ucTachometerPulsesPerRevolution == 0)) - return 0; + return -ENODEV; tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_TACH_STATUS, TACH_PERIOD); -- cgit v0.10.2 From c24784f01549ecdf23fc00d0588423bcf8956714 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:04:07 +0200 Subject: drm/amd: fix scheduler fence teardown order v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500 Reported-by: Grazvydas Ignotas Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71ed27e..73f2415 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -737,6 +737,7 @@ static int __init amdgpu_init(void) { amdgpu_sync_init(); amdgpu_fence_slab_init(); + amd_sched_fence_slab_init(); if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -756,6 +757,7 @@ static void __exit amdgpu_exit(void) drm_pci_exit(driver, pdriver); amdgpu_unregister_atpx_handler(); amdgpu_sync_fini(); + amd_sched_fence_slab_fini(); amdgpu_fence_slab_fini(); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 910b8d5..ffe1f85 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -34,9 +34,6 @@ static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity); static void amd_sched_wakeup(struct amd_gpu_scheduler *sched); static void amd_sched_process_job(struct fence *f, struct fence_cb *cb); -struct kmem_cache *sched_fence_slab; -atomic_t sched_fence_slab_ref = ATOMIC_INIT(0); - /* Initialize a given run queue struct */ static void amd_sched_rq_init(struct amd_sched_rq *rq) { @@ -618,13 +615,6 @@ int amd_sched_init(struct amd_gpu_scheduler *sched, INIT_LIST_HEAD(&sched->ring_mirror_list); spin_lock_init(&sched->job_list_lock); atomic_set(&sched->hw_rq_count, 0); - if (atomic_inc_return(&sched_fence_slab_ref) == 1) { - sched_fence_slab = kmem_cache_create( - "amd_sched_fence", sizeof(struct amd_sched_fence), 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!sched_fence_slab) - return -ENOMEM; - } /* Each scheduler will run on a seperate kernel thread */ sched->thread = kthread_run(amd_sched_main, sched, sched->name); @@ -645,7 +635,4 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); - rcu_barrier(); - if (atomic_dec_and_test(&sched_fence_slab_ref)) - kmem_cache_destroy(sched_fence_slab); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h index 7cbbbfb..51068e6 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h @@ -30,9 +30,6 @@ struct amd_gpu_scheduler; struct amd_sched_rq; -extern struct kmem_cache *sched_fence_slab; -extern atomic_t sched_fence_slab_ref; - /** * A scheduler entity is a wrapper around a job queue or a group * of other entities. Entities take turns emitting jobs from their @@ -145,6 +142,9 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched, struct amd_sched_entity *entity); void amd_sched_entity_push_job(struct amd_sched_job *sched_job); +int amd_sched_fence_slab_init(void); +void amd_sched_fence_slab_fini(void); + struct amd_sched_fence *amd_sched_fence_create( struct amd_sched_entity *s_entity, void *owner); void amd_sched_fence_scheduled(struct amd_sched_fence *fence); diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 3653b5a..88fc2d6 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -27,6 +27,25 @@ #include #include "gpu_scheduler.h" +static struct kmem_cache *sched_fence_slab; + +int amd_sched_fence_slab_init(void) +{ + sched_fence_slab = kmem_cache_create( + "amd_sched_fence", sizeof(struct amd_sched_fence), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!sched_fence_slab) + return -ENOMEM; + + return 0; +} + +void amd_sched_fence_slab_fini(void) +{ + rcu_barrier(); + kmem_cache_destroy(sched_fence_slab); +} + struct amd_sched_fence *amd_sched_fence_create(struct amd_sched_entity *entity, void *owner) { -- cgit v0.10.2 From 245ae5e915853ced749eb47a343749cf0a9c4109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:39:08 +0200 Subject: drm/amdgpu: add some error handling to amdgpu_init v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just to be clean should we ever run into -ENOMEM during module init. v2: fix typo in commit message Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 73f2415..02ff0747 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -735,9 +735,20 @@ static struct pci_driver amdgpu_kms_pci_driver = { static int __init amdgpu_init(void) { - amdgpu_sync_init(); - amdgpu_fence_slab_init(); - amd_sched_fence_slab_init(); + int r; + + r = amdgpu_sync_init(); + if (r) + goto error_sync; + + r = amdgpu_fence_slab_init(); + if (r) + goto error_fence; + + r = amd_sched_fence_slab_init(); + if (r) + goto error_sched; + if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -749,6 +760,15 @@ static int __init amdgpu_init(void) amdgpu_register_atpx_handler(); /* let modprobe override vga console setting */ return drm_pci_init(driver, pdriver); + +error_sched: + amdgpu_fence_slab_fini(); + +error_fence: + amdgpu_sync_fini(); + +error_sync: + return r; } static void __exit amdgpu_exit(void) -- cgit v0.10.2 From 8d23ea403044efe97553dd64228b172c8ffca047 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 25 Oct 2016 12:17:59 +0530 Subject: drm/msm/dsi: Queue HPD helper work in attach/detach callbacks The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index f05ed0e..6f24002 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -139,6 +139,7 @@ struct msm_dsi_host { u32 err_work_state; struct work_struct err_work; + struct work_struct hpd_work; struct workqueue_struct *workqueue; /* DSI 6G TX buffer*/ @@ -1294,6 +1295,14 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host) wmb(); /* make sure dsi controller enabled again */ } +static void dsi_hpd_worker(struct work_struct *work) +{ + struct msm_dsi_host *msm_host = + container_of(work, struct msm_dsi_host, hpd_work); + + drm_helper_hpd_irq_event(msm_host->dev); +} + static void dsi_err_worker(struct work_struct *work) { struct msm_dsi_host *msm_host = @@ -1480,7 +1489,7 @@ static int dsi_host_attach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1494,7 +1503,7 @@ static int dsi_host_detach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1748,6 +1757,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* setup workqueue */ msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0); INIT_WORK(&msm_host->err_work, dsi_err_worker); + INIT_WORK(&msm_host->hpd_work, dsi_hpd_worker); msm_dsi->host = &msm_host->base; msm_dsi->id = msm_host->id; -- cgit v0.10.2 From 73b65b197024f3f9ef16a28cc9533c011e0a3f6d Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 27 Oct 2016 11:57:15 +0530 Subject: drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c index 598fdaf..26e3a01 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) .parent_names = (const char *[]){ "xo" }, .num_parents = 1, .name = vco_name, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c index 38c90e1..4900845 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) struct clk_init_data vco_init = { .parent_names = (const char *[]){ "pxo" }, .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c index aa94a55..143eab4 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c @@ -702,6 +702,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_8996_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8996_init(struct platform_device *pdev) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index 92da69a..9959075 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -424,6 +424,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8960_init(struct platform_device *pdev) -- cgit v0.10.2 From 31e4801aa2e59d4b42dc0fd42846a3aa7a6361af Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Oct 2016 12:43:17 -0400 Subject: drm/msm/mdp5: handle non-fullscreen base plane case If the bottom-most layer is not fullscreen, we need to use the BASE mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT). The blend_setup() code pretty much handled this already, we just had to figure this out in _atomic_check() and assign the stages appropriately. Also fix the case where there are zero enabled planes, where we also need to enable BORDER_OUT. Signed-off-by: Rob Clark diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index fa2be7c..c205c36 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -223,12 +223,7 @@ static void blend_setup(struct drm_crtc *crtc) plane_cnt++; } - /* - * If there is no base layer, enable border color. - * Although it's not possbile in current blend logic, - * put it here as a reminder. - */ - if (!pstates[STAGE_BASE] && plane_cnt) { + if (!pstates[STAGE_BASE]) { ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; DBG("Border Color is enabled"); } @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b) return pa->state->zpos - pb->state->zpos; } +/* is there a helper for this? */ +static bool is_fullscreen(struct drm_crtc_state *cstate, + struct drm_plane_state *pstate) +{ + return (pstate->crtc_x <= 0) && (pstate->crtc_y <= 0) && + ((pstate->crtc_x + pstate->crtc_w) >= cstate->mode.hdisplay) && + ((pstate->crtc_y + pstate->crtc_h) >= cstate->mode.vdisplay); +} + static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct plane_state pstates[STAGE_MAX + 1]; const struct mdp5_cfg_hw *hw_cfg; const struct drm_plane_state *pstate; - int cnt = 0, i; + int cnt = 0, base = 0, i; DBG("%s: check", mdp5_crtc->name); - /* verify that there are not too many planes attached to crtc - * and that we don't have conflicting mixer stages: - */ - hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { - if (cnt >= (hw_cfg->lm.nb_stages)) { - dev_err(dev->dev, "too many planes!\n"); - return -EINVAL; - } - - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); + /* if the bottom-most layer is not fullscreen, we need to use + * it for solid-color: + */ + if ((cnt > 0) && !is_fullscreen(state, &pstates[0].state->base)) + base++; + + /* verify that there are not too many planes attached to crtc + * and that we don't have conflicting mixer stages: + */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); + + if ((cnt + base) >= hw_cfg->lm.nb_stages) { + dev_err(dev->dev, "too many planes!\n"); + return -EINVAL; + } + for (i = 0; i < cnt; i++) { - pstates[i].state->stage = STAGE_BASE + i; + pstates[i].state->stage = STAGE_BASE + i + base; DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name, pipe2name(mdp5_plane_pipe(pstates[i].plane)), pstates[i].state->stage); -- cgit v0.10.2 From 07cd2e36263af34f7f0b48e36eff5d4b77d5756a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Oct 2016 12:00:21 -0400 Subject: drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 Looks like cut/paste error from the other device cfgs (which do support scaling on RGBn pipes). Signed-off-by: Rob Clark diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index ac9e4cd..0e2bc56 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -272,7 +272,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .count = 2, .base = { 0x14000, 0x16000 }, .caps = MDP_PIPE_CAP_HFLIP | MDP_PIPE_CAP_VFLIP | - MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_DECIMATION, + MDP_PIPE_CAP_DECIMATION, }, .pipe_dma = { .count = 1, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 951c002..83bf997 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -292,8 +292,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, format = to_mdp_format(msm_framebuffer_format(state->fb)); if (MDP_FORMAT_IS_YUV(format) && !pipe_supports_yuv(mdp5_plane->caps)) { - dev_err(plane->dev->dev, - "Pipe doesn't support YUV\n"); + DBG("Pipe doesn't support YUV\n"); return -EINVAL; } @@ -301,8 +300,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, if (!(mdp5_plane->caps & MDP_PIPE_CAP_SCALE) && (((state->src_w >> 16) != state->crtc_w) || ((state->src_h >> 16) != state->crtc_h))) { - dev_err(plane->dev->dev, - "Pipe doesn't support scaling (%dx%d -> %dx%d)\n", + DBG("Pipe doesn't support scaling (%dx%d -> %dx%d)\n", state->src_w >> 16, state->src_h >> 16, state->crtc_w, state->crtc_h); @@ -313,8 +311,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, vflip = !!(state->rotation & DRM_REFLECT_Y); if ((vflip && !(mdp5_plane->caps & MDP_PIPE_CAP_VFLIP)) || (hflip && !(mdp5_plane->caps & MDP_PIPE_CAP_HFLIP))) { - dev_err(plane->dev->dev, - "Pipe doesn't support flip\n"); + DBG("Pipe doesn't support flip\n"); return -EINVAL; } -- cgit v0.10.2 From 67cba0fbb484bbc1af42f2804662a80008ba61e9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 24 Oct 2016 11:46:44 -0400 Subject: drm/msm/mdp5: 8x16 actually has 8 mixer stages Signed-off-by: Rob Clark diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index 0e2bc56..8b4e300 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -282,7 +282,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .lm = { .count = 2, /* LM0 and LM3 */ .base = { 0x44000, 0x47000 }, - .nb_stages = 5, + .nb_stages = 8, .max_width = 2048, .max_height = 0xFFFF, }, -- cgit v0.10.2 From 16976085a114ae293c6fa7a463d74600ffcfeb4b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 3 Nov 2016 17:36:18 +0530 Subject: drm/msm: Fix error handling crashes seen when VRAM allocation fails If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Andy Gross diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fb5c0b0..46568fc 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -228,7 +228,7 @@ static int msm_drm_uninit(struct device *dev) flush_workqueue(priv->atomic_wq); destroy_workqueue(priv->atomic_wq); - if (kms) + if (kms && kms->funcs) kms->funcs->destroy(kms); if (gpu) { diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 283d284..192b2d3 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -163,6 +163,9 @@ void msm_gem_shrinker_init(struct drm_device *dev) void msm_gem_shrinker_cleanup(struct drm_device *dev) { struct msm_drm_private *priv = dev->dev_private; - WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); - unregister_shrinker(&priv->shrinker); + + if (priv->shrinker.nr_deferred) { + WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); + unregister_shrinker(&priv->shrinker); + } } -- cgit v0.10.2 From 8d83bc22b259e5526625b6d298f637786c71129f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:46 +0300 Subject: drm/i915: Respect alternate_ddc_pin for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f40a35f..13c3061 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; +} + void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_dig_port->port; - uint8_t alternate_ddc_pin; DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", port_name(port)); @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; connector->stereo_allowed = 1; + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); + switch (port) { case PORT_B: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - if (WARN_ON(IS_BROXTON(dev_priv))) - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; - else if (IS_CHERRYVIEW(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; case PORT_E: - /* On SKL PORT E doesn't have seperate GMBUS pin - * We rely on VBT to set a proper alternate GMBUS pin. */ - alternate_ddc_pin = - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; - switch (alternate_ddc_pin) { - case DDC_PIN_B: - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; - break; - case DDC_PIN_C: - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; - break; - case DDC_PIN_D: - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; - break; - default: - MISSING_CASE(alternate_ddc_pin); - } intel_encoder->hpd_pin = HPD_PORT_E; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { -- cgit v0.10.2 From cdffe3e252bb55e82ee89bbdfe8d2f18b6157c28 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 26 Oct 2016 12:36:09 -0400 Subject: drm/i915/vlv: Prevent enabling hpd polling in late suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude Cc: Ville Syrjälä Cc: Jani Saarinen Cc: Petry Latvala Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com (cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 6c11168..a38c2fe 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1139,7 +1139,9 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) intel_power_sequencer_reset(dev_priv); - intel_hpd_poll_init(dev_priv); + /* Prevent us from re-enabling polling on accident in late suspend */ + if (!dev_priv->drm.dev->power.is_suspended) + intel_hpd_poll_init(dev_priv); } static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, -- cgit v0.10.2 From fbb21c5202ae7f1e71e832b1af59fb047da6383e Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Tue, 1 Nov 2016 11:47:59 -0700 Subject: drm/i915/dp: BDW cdclk fix for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ad1879..4f57f8c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10243,6 +10243,27 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) bxt_set_cdclk(to_i915(dev), req_cdclk); } +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + /* compute the max rate for new configuration */ static int ilk_max_pixel_rate(struct drm_atomic_state *state) { @@ -10268,9 +10289,9 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + if (IS_BROADWELL(dev_priv)) + pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); intel_state->min_pixclk[i] = pixel_rate; } -- cgit v0.10.2 From 61e0c5438866d0e737937fc35d752538960e1e9f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 2 Nov 2016 13:13:21 -0700 Subject: drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4f57f8c..81c1149 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10246,8 +10246,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, int pixel_rate) { + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (crtc_state->ips_enabled) + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); /* BSpec says "Do not use DisplayPort with CDCLK less than @@ -10289,7 +10291,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - if (IS_BROADWELL(dev_priv)) + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, pixel_rate); -- cgit v0.10.2 From c4b8c570447a7bc171829532269878345b3ea9d0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 10:54:43 +0000 Subject: drm/i915: Round tile chunks up for constructing partial VMAs When we split a large object up into chunks for GTT faulting (because we can't fit the whole object into the aperture) we have to align our cuts with the fence registers. Each partial VMA must cover a complete set of tile rows or the offset into each partial VMA is not aligned with the whole image. Currently we enforce a minimum size on each partial VMA, but this minimum size itself was not aligned to the tile row causing distortion. Reported-by: Andreas Reis Reported-by: Chris Clayton Reported-by: Norbert Preining Tested-by: Norbert Preining Tested-by: Chris Clayton Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size") Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402 Testcase: igt/gem_mmap_gtt/medium-copy-odd Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 23960de..44b3f01 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1806,7 +1806,7 @@ int i915_gem_fault(struct vm_area_struct *area, struct vm_fault *vmf) /* Use a partial view if it is bigger than available space */ chunk_size = MIN_CHUNK_PAGES; if (i915_gem_object_is_tiled(obj)) - chunk_size = max(chunk_size, tile_row_pages(obj)); + chunk_size = roundup(chunk_size, tile_row_pages(obj)); memset(&view, 0, sizeof(view)); view.type = I915_GGTT_VIEW_PARTIAL; -- cgit v0.10.2 From 54905ab5fe7aa453610e31cec640e528aaedb2e2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 11:01:28 +0000 Subject: drm/i915: Limit Valleyview and earlier to only using mappable scanout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Valleyview appears to be limited to only scanning out from the first 512MiB of the Global GTT. Lets presume that this behaviour was inherited from the display block copied from g4x (not Ironlake) and all earlier generations are similarly affected, though testing suggests different symptoms. For simplicity, impose that these platforms must scanout from the mappable region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this catches Cherryview which does not appear to be limited to the low aperture for its scanout.) v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about limiting this workaround to the old style of display engine. v3: Update changelog to reflect testing by Ville Syrjälä v4: Include the changes to the comments as well Reported-by: Luis Botello Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036 Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Joonas Lahtinen Cc: Ville Syrjälä Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä (cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 44b3f01..91ab7e9 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3543,8 +3543,22 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, if (view->type == I915_GGTT_VIEW_NORMAL) vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, PIN_MAPPABLE | PIN_NONBLOCK); - if (IS_ERR(vma)) - vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0); + if (IS_ERR(vma)) { + struct drm_i915_private *i915 = to_i915(obj->base.dev); + unsigned int flags; + + /* Valleyview is definitely limited to scanning out the first + * 512MiB. Lets presume this behaviour was inherited from the + * g4x display engine and that all earlier gen are similarly + * limited. Testing suggests that it is a little more + * complicated than this. For example, Cherryview appears quite + * happy to scanout from anywhere within its global aperture. + */ + flags = 0; + if (HAS_GMCH_DISPLAY(i915)) + flags = PIN_MAPPABLE; + vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags); + } if (IS_ERR(vma)) goto err_unpin_display; -- cgit v0.10.2 From 757124d95c42bb579d67df51e51789849929ee31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Nov 2016 17:47:51 -0400 Subject: drm/amdgpu: fix crash in acp_hw_fini On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index 892d60f..2057683 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -395,9 +395,12 @@ static int acp_hw_fini(void *handle) { int i, ret; struct device *dev; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + for (i = 0; i < ACP_DEVS ; i++) { dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i); ret = pm_genpd_remove_device(&adev->acp.acp_genpd->gpd, dev); -- cgit v0.10.2 From a29d126027c781eaa305ecae432bb04d41e198c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Nov 2016 14:52:18 +0100 Subject: drm/amdgpu/powerplay/smu7: fix unintialized data usage A recent bugfix replaced an out-of-bounds access with direct use of unintialized data: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc': drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here uint32_t vddc, vddci; This initializes the data as before using the correct type. Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 7585402..51fb86f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2133,9 +2133,11 @@ static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { + vddc = tab->vddc; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, &data->vddc_leakage); tab->vddc = vddc; + vddci = tab->vddci; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, &data->vddci_leakage); tab->vddci = vddci; -- cgit v0.10.2 From f20024d8ba6bc8abf8d0ec12eabfdedd9935fff2 Mon Sep 17 00:00:00 2001 From: Andrew Shadura Date: Thu, 3 Nov 2016 11:09:24 +0100 Subject: drm/amd/powerplay: return false instead of -EINVAL Returning -EINVAL from a bool-returning function phm_check_smc_update_required_for_display_configuration has an unexpected effect of returning true, which is probably not what was intended. Replace -EINVAL by false. The only place this function is called from is psm_adjust_power_state_dynamic in drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106: if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) { phm_apply_state_adjust_rules(hwmgr, requested, pcurrent); phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware); hwmgr->current_ps = requested; } It seems to expect a boolean value here. This issue has been found using the following Coccinelle semantic patch written by Peter Senna Tschudin: @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } Reviewed-by: Alex Deucher Signed-off-by: Andrew Shadura Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index 14f8c1f..0723758 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -272,7 +272,7 @@ bool phm_check_smc_update_required_for_display_configuration(struct pp_hwmgr *hw PHM_FUNC_CHECK(hwmgr); if (hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration == NULL) - return -EINVAL; + return false; return hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration(hwmgr); } -- cgit v0.10.2 From 5ced937b7d8dae2c6a536112abaad6352769a931 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 8 Nov 2016 17:04:10 +0100 Subject: drm/imx: disable planes before DC If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 4e1ae3f..6be515a 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -68,6 +68,12 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, ipu_dc_disable_channel(ipu_crtc->dc); ipu_di_disable(ipu_crtc->di); + /* + * Planes must be disabled before DC clock is removed, as otherwise the + * attached IDMACs will be left in undefined state, possibly hanging + * the IPU or even system. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); ipu_dc_disable(ipu); spin_lock_irq(&crtc->dev->event_lock); @@ -77,9 +83,6 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - /* always disable planes on the CRTC */ - drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); - drm_crtc_vblank_off(crtc); } -- cgit v0.10.2 From 0a866d38ef3c13cf5834b78df21ee4c39bb5a689 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:01:01 -0500 Subject: drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 2ba7937..520665e 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -711,7 +711,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, int ret = 0; if (hwmgr->chip_id < CHIP_POLARIS10) { - atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); + ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; } else { -- cgit v0.10.2 From 90ebf11857c2743fab1b2b64140aff24e256e758 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:04:54 -0500 Subject: drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 520665e..e03dcb6 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -710,7 +710,9 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t vol; int ret = 0; - if (hwmgr->chip_id < CHIP_POLARIS10) { + if (hwmgr->chip_id < CHIP_TONGA) { + ret = atomctrl_get_voltage_evv(hwmgr, id, voltage); + } else if (hwmgr->chip_id < CHIP_POLARIS10) { ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; -- cgit v0.10.2 From 0f12f73c5175d39445fa10cdca4481f80efdef49 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 17:52:42 -0500 Subject: drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 51fb86f..f41cddf 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1460,19 +1460,19 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info == NULL) - return -EINVAL; - - sclk_table = table_info->vdd_dep_on_sclk; - for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; if (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) { - if (0 == phm_get_sclk_for_voltage_evv(hwmgr, + if ((hwmgr->pp_table_version == PP_TABLE_V1) + && !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { @@ -1498,12 +1498,15 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) } } } else { - if ((hwmgr->pp_table_version == PP_TABLE_V0) || !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddc_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { -- cgit v0.10.2 From 954e6bee03fea509a85aea4cbf45307fe4e3b43e Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 10 Nov 2016 14:07:34 +0800 Subject: drm/amd/powerplay: implement get_clock_by_type for iceland. iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index f41cddf..b0c929dd 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4233,18 +4233,26 @@ static int smu7_get_sclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) { struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)hwmgr->pptable; - struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table; + struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table = NULL; + struct phm_clock_voltage_dependency_table *sclk_table; int i; - if (table_info == NULL) - return -EINVAL; - - dep_sclk_table = table_info->vdd_dep_on_sclk; - - for (i = 0; i < dep_sclk_table->count; i++) { - clocks->clock[i] = dep_sclk_table->entries[i].clk; - clocks->count++; + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL || table_info->vdd_dep_on_sclk == NULL) + return -EINVAL; + dep_sclk_table = table_info->vdd_dep_on_sclk; + for (i = 0; i < dep_sclk_table->count; i++) { + clocks->clock[i] = dep_sclk_table->entries[i].clk; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + sclk_table = hwmgr->dyn_state.vddc_dependency_on_sclk; + for (i = 0; i < sclk_table->count; i++) { + clocks->clock[i] = sclk_table->entries[i].clk; + clocks->count++; + } } + return 0; } @@ -4266,17 +4274,24 @@ static int smu7_get_mclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) (struct phm_ppt_v1_information *)hwmgr->pptable; struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table; int i; + struct phm_clock_voltage_dependency_table *mclk_table; - if (table_info == NULL) - return -EINVAL; - - dep_mclk_table = table_info->vdd_dep_on_mclk; - - for (i = 0; i < dep_mclk_table->count; i++) { - clocks->clock[i] = dep_mclk_table->entries[i].clk; - clocks->latency[i] = smu7_get_mem_latency(hwmgr, + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL) + return -EINVAL; + dep_mclk_table = table_info->vdd_dep_on_mclk; + for (i = 0; i < dep_mclk_table->count; i++) { + clocks->clock[i] = dep_mclk_table->entries[i].clk; + clocks->latency[i] = smu7_get_mem_latency(hwmgr, dep_mclk_table->entries[i].clk); - clocks->count++; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + mclk_table = hwmgr->dyn_state.vddc_dependency_on_mclk; + for (i = 0; i < mclk_table->count; i++) { + clocks->clock[i] = mclk_table->entries[i].clk; + clocks->count++; + } } return 0; } -- cgit v0.10.2 From e5581fe2b4f40e54bfea9a1eee1bc487da52e98c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 8 Nov 2016 16:38:00 +1000 Subject: drm/udl: make control msg static const. (v2) Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index 29f0207..873f010 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -98,17 +98,23 @@ success: static int udl_select_std_channel(struct udl_device *udl) { int ret; - u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, - 0x1C, 0x88, 0x5E, 0x15, - 0x60, 0xFE, 0xC6, 0x97, - 0x16, 0x3D, 0x47, 0xF2}; + static const u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, + 0x1C, 0x88, 0x5E, 0x15, + 0x60, 0xFE, 0xC6, 0x97, + 0x16, 0x3D, 0x47, 0xF2}; + void *sendbuf; + + sendbuf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + if (!sendbuf) + return -ENOMEM; ret = usb_control_msg(udl->udev, usb_sndctrlpipe(udl->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), + sendbuf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + kfree(sendbuf); return ret < 0 ? ret : 0; } -- cgit v0.10.2