From 57789d69c5e7cdfdad6c0f1c54ab17240d800ac2 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sat, 1 Feb 2014 16:35:42 -0600 Subject: ARM: hisi: fix kconfig warning on HAVE_ARM_TWD Commit "ARM: hisi: don't select SMP" introduced a kconfig warning: warning: (ARCH_HI3xxx) selects HAVE_ARM_TWD which has unmet direct dependencies (SMP) Fix HAVE_ARM_TWD to depend on SMP. Signed-off-by: Rob Herring Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 8f4649b..1abae5f 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -8,7 +8,7 @@ config ARCH_HI3xxx select CLKSRC_OF select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU - select HAVE_ARM_TWD + select HAVE_ARM_TWD if SMP select HAVE_SMP select PINCTRL select PINCTRL_SINGLE -- cgit v0.10.2 From e803d988662ff365c2ed3c2d10a0aad811c1f492 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sat, 1 Feb 2014 16:35:43 -0600 Subject: ARM: moxart: move DMA_OF selection to driver Move the DMA_OF selection to the DMA driver to fix kconfig warning: warning: (ARCH_MOXART) selects DMA_OF which has unmet direct dependencies (DMADEVICES && OF) Signed-off-by: Rob Herring Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index ba470d6..3795ae2 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,7 +2,6 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4T select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select DMA_OF select USE_OF select CLKSRC_OF select CLKSRC_MMIO diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 9bed1a2..605b016 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -346,6 +346,7 @@ config MOXART_DMA tristate "MOXART DMA support" depends on ARCH_MOXART select DMA_ENGINE + select DMA_OF select DMA_VIRTUAL_CHANNELS help Enable support for the MOXA ART SoC DMA controller. -- cgit v0.10.2 From 8b7dfa7dc701a27ac8ea4c4dfc0dbc8dce4825de Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sat, 1 Feb 2014 16:35:44 -0600 Subject: ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile The selection of HAVE_ARM_TWD for OMAP and shmobile depend on LOCAL_TIMER which no longer exists. They should depend on SMP instead. Cc: Tony Lindgren Cc: Simon Horman Cc: Magnus Damm Signed-off-by: Rob Herring Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 653b489..e2ce4f8 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -54,7 +54,7 @@ config SOC_OMAP5 select ARM_GIC select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3386406..05fa505 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP select ARM_GIC select MIGHT_HAVE_CACHE_L2X0 -- cgit v0.10.2 From 04c2facad8fee66c981a51852806d8923336f362 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 4 Feb 2014 18:33:11 +0100 Subject: drivers: phy: Make NULL a valid phy reference The common clock framework considers NULL a valid clock reference. This makes handling optional clocks simple, in that if the optional clock is not available, a NULL reference can be used in the place of a real clock, simplifying the clock consumer. Extend this concept to the phy consumer API. A NULL can be passed to the release calls, the phy_init() and phy_exit() calls, and phy_power_on() and phy_power_off() and a NOP is performed. Signed-off-by: Andrew Lunn Tested-by: Gregory CLEMENT Acked-by: Kishon Vijay Abraham I Signed-off-by: Jason Cooper diff --git a/Documentation/phy.txt b/Documentation/phy.txt index 0103e4b..2e24b99 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -84,6 +84,12 @@ The only difference between the two APIs is that devm_phy_get associates the device with the PHY using devres on successful PHY get. On driver detach, release function is invoked on the the devres data and devres data is freed. +It should be noted that NULL is a valid phy reference. All phy +consumer calls on the NULL phy become NOPs. That is the release calls, +the phy_init() and phy_exit() calls, and phy_power_on() and +phy_power_off() calls are all NOP when applied to a NULL phy. The NULL +phy is useful in devices for handling optional phy devices. + 5. Releasing a reference to the PHY When the controller no longer needs the PHY, it has to release the reference diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 645c867..a9cdeee2 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -162,6 +162,9 @@ int phy_init(struct phy *phy) { int ret; + if (!phy) + return 0; + ret = phy_pm_runtime_get_sync(phy); if (ret < 0 && ret != -ENOTSUPP) return ret; @@ -187,6 +190,9 @@ int phy_exit(struct phy *phy) { int ret; + if (!phy) + return 0; + ret = phy_pm_runtime_get_sync(phy); if (ret < 0 && ret != -ENOTSUPP) return ret; @@ -212,6 +218,9 @@ int phy_power_on(struct phy *phy) { int ret; + if (!phy) + return 0; + ret = phy_pm_runtime_get_sync(phy); if (ret < 0 && ret != -ENOTSUPP) return ret; @@ -240,6 +249,9 @@ int phy_power_off(struct phy *phy) { int ret; + if (!phy) + return 0; + mutex_lock(&phy->mutex); if (phy->power_count == 1 && phy->ops->power_off) { ret = phy->ops->power_off(phy); @@ -308,7 +320,7 @@ err0: */ void phy_put(struct phy *phy) { - if (IS_ERR(phy)) + if (!phy || IS_ERR(phy)) return; module_put(phy->ops->owner); @@ -328,6 +340,9 @@ void devm_phy_put(struct device *dev, struct phy *phy) { int r; + if (!phy) + return; + r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy); dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); } -- cgit v0.10.2 From 788a4d56ff378bff0b8e685d03a962b36903a149 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 4 Feb 2014 18:33:12 +0100 Subject: drivers: phy: Add support for optional phys Add devm_phy_optional_get and phy_optional_get, which should be used when the phy is optional. They does not return an error when the phy does not exist, rather they returns NULL, which is considered as a valid phy, but results in NOPs when used with the consumer API. Signed-off-by: Andrew Lunn Tested-by: Gregory CLEMENT Acked-by: Kishon Vijay Abraham I Signed-off-by: Jason Cooper diff --git a/Documentation/phy.txt b/Documentation/phy.txt index 2e24b99..ebff6ee 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -75,14 +75,20 @@ Before the controller can make use of the PHY, it has to get a reference to it. This framework provides the following APIs to get a reference to the PHY. struct phy *phy_get(struct device *dev, const char *string); +struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); - -phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot, -the string arguments should contain the phy name as given in the dt data and -in the case of non-dt boot, it should contain the label of the PHY. -The only difference between the two APIs is that devm_phy_get associates the -device with the PHY using devres on successful PHY get. On driver detach, -release function is invoked on the the devres data and devres data is freed. +struct phy *devm_phy_optional_get(struct device *dev, const char *string); + +phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can +be used to get the PHY. In the case of dt boot, the string arguments +should contain the phy name as given in the dt data and in the case of +non-dt boot, it should contain the label of the PHY. The two +devm_phy_get associates the device with the PHY using devres on +successful PHY get. On driver detach, release function is invoked on +the the devres data and devres data is freed. phy_optional_get and +devm_phy_optional_get should be used when the phy is optional. These +two functions will never return -ENODEV, but instead returns NULL when +the phy cannot be found. It should be noted that NULL is a valid phy reference. All phy consumer calls on the NULL phy become NOPs. That is the release calls, diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index a9cdeee2..5f5b0f4 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -426,6 +426,27 @@ struct phy *phy_get(struct device *dev, const char *string) EXPORT_SYMBOL_GPL(phy_get); /** + * phy_optional_get() - lookup and obtain a reference to an optional phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or the name of the controller + * port for non-dt case + * + * Returns the phy driver, after getting a refcount to it; or + * NULL if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *phy_optional_get(struct device *dev, const char *string) +{ + struct phy *phy = phy_get(dev, string); + + if (PTR_ERR(phy) == -ENODEV) + phy = NULL; + + return phy; +} +EXPORT_SYMBOL_GPL(phy_optional_get); + +/** * devm_phy_get() - lookup and obtain a reference to a phy. * @dev: device that requests this phy * @string: the phy name as given in the dt data or phy device name @@ -456,6 +477,30 @@ struct phy *devm_phy_get(struct device *dev, const char *string) EXPORT_SYMBOL_GPL(devm_phy_get); /** + * devm_phy_optional_get() - lookup and obtain a reference to an optional phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or phy device name + * for non-dt case + * + * Gets the phy using phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres + * data, then, devres data is freed. This differs to devm_phy_get() in + * that if the phy does not exist, it is not considered an error and + * -ENODEV will not be returned. Instead the NULL phy is returned, + * which can be passed to all other phy consumer calls. + */ +struct phy *devm_phy_optional_get(struct device *dev, const char *string) +{ + struct phy *phy = devm_phy_get(dev, string); + + if (PTR_ERR(phy) == -ENODEV) + phy = NULL; + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_optional_get); + +/** * phy_create() - create a new phy * @dev: device that is creating the new phy * @ops: function pointers for performing phy operations diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e273e5a..3f83459 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -146,7 +146,9 @@ static inline void phy_set_bus_width(struct phy *phy, int bus_width) phy->attrs.bus_width = bus_width; } struct phy *phy_get(struct device *dev, const char *string); +struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); +struct phy *devm_phy_optional_get(struct device *dev, const char *string); void phy_put(struct phy *phy); void devm_phy_put(struct device *dev, struct phy *phy); struct phy *of_phy_simple_xlate(struct device *dev, @@ -232,11 +234,23 @@ static inline struct phy *phy_get(struct device *dev, const char *string) return ERR_PTR(-ENOSYS); } +static inline struct phy *phy_optional_get(struct device *dev, + const char *string) +{ + return ERR_PTR(-ENOSYS); +} + static inline struct phy *devm_phy_get(struct device *dev, const char *string) { return ERR_PTR(-ENOSYS); } +static inline struct phy *devm_phy_optional_get(struct device *dev, + const char *string) +{ + return ERR_PTR(-ENOSYS); +} + static inline void phy_put(struct phy *phy) { } -- cgit v0.10.2 From 90aa2997029fa623fe9e3ec3a469a00a34130237 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 4 Feb 2014 18:33:13 +0100 Subject: ata: sata_mv: Fix probe failures with optional phys Make use of devm_phy_optional_get() in order to fix probe failures on Armada 370, XP and others, when there is no phy driver available. Signed-off-by: Andrew Lunn Tested-by: Gregory CLEMENT Acked-by: Tejun Heo Acked-by: Kishon Vijay Abraham I Signed-off-by: Jason Cooper diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 20a7517..52b8181 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4126,12 +4126,14 @@ static int mv_platform_probe(struct platform_device *pdev) clk_prepare_enable(hpriv->port_clks[port]); sprintf(port_number, "port%d", port); - hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number); + hpriv->port_phys[port] = devm_phy_optional_get(&pdev->dev, + port_number); if (IS_ERR(hpriv->port_phys[port])) { rc = PTR_ERR(hpriv->port_phys[port]); hpriv->port_phys[port] = NULL; - if ((rc != -EPROBE_DEFER) && (rc != -ENODEV)) - dev_warn(&pdev->dev, "error getting phy"); + if (rc != -EPROBE_DEFER) + dev_warn(&pdev->dev, "error getting phy %d", + rc); goto err; } else phy_power_on(hpriv->port_phys[port]); -- cgit v0.10.2 From 821003ba4b9ffbf020a12177f0ea3d27826463c3 Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Wed, 15 Jan 2014 11:24:46 +0100 Subject: ARM: at91/dt: sam9263: fix compatibility string for the I2C Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0042f73..fece866 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -523,7 +523,7 @@ }; i2c0: i2c@fff88000 { - compatible = "atmel,at91sam9263-i2c"; + compatible = "atmel,at91sam9260-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; -- cgit v0.10.2 From 5f877518775a681b516dde700b511641fb3e4f9b Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 16 Jan 2014 16:25:34 +0100 Subject: ARM: at91/dt: fix sama5d3 ohci hclk clock reference The hclk clock of the ohci node is referencing udphs_clk instead of uhphs_clk. Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 52447c1..3d5faf8 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1228,7 +1228,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; -- cgit v0.10.2 From d7e67ee8b2ce27f4481d3cf2ac6ba8febcc3d888 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Tue, 14 Jan 2014 14:34:44 +0800 Subject: ARM: at91: enable USB host on at91sam9n12ek board Enable USB host on at91sam9n12ek board. Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index e9487f6..924a6a6 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -124,6 +124,10 @@ nand-on-flash-bbt; status = "okay"; }; + + usb0: ohci@00500000 { + status = "okay"; + }; }; leds { -- cgit v0.10.2 From 425bb8d6eb8cf7b6aa0cddd3ee59a919b0b21a80 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 17 Dec 2013 10:36:17 +0100 Subject: mmc: atmel-mci: document clock properties Document the clock properties required by the atmel-mci driver. Signed-off-by: Boris BREZILLON Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt index 0a85c70..07ad020 100644 --- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt +++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt @@ -13,6 +13,9 @@ Required properties: - #address-cells: should be one. The cell is the slot id. - #size-cells: should be zero. - at least one slot node +- clock-names: tuple listing input clock names. + Required elements: "mci_clk" +- clocks: phandles to input clocks. The node contains child nodes for each slot that the platform uses @@ -24,6 +27,8 @@ mmc0: mmc@f0008000 { interrupts = <12 4>; #address-cells = <1>; #size-cells = <0>; + clock-names = "mci_clk"; + clocks = <&mci0_clk>; [ child node definitions...] }; -- cgit v0.10.2 From bdb90b6bb78ff51603ca85b2d353699238b54c8e Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 17 Dec 2013 12:01:34 +0100 Subject: spi/atmel: document clock properties Document the clock properties required by the spi-atmel driver. Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt index 07e04cd..4f8184d 100644 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -5,6 +5,9 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain spi interrupt - cs-gpios: chipselects +- clock-names: tuple listing input clock names. + Required elements: "spi_clk" +- clocks: phandles to input clocks. Example: @@ -14,6 +17,8 @@ spi1: spi@fffcc000 { interrupts = <13 4 5>; #address-cells = <1>; #size-cells = <0>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; status = "okay"; -- cgit v0.10.2 From b7c2b6157079811586180d13c44a1095b57c2d47 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 4 Feb 2014 15:05:55 +0100 Subject: ARM: at91: add Atmel's SAMA5D3 Xplained board Add DT file for new SAMA5D3 Xplained board. This board is based on Atmel's SAMA5D36 Cortex-A5 SoC. Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b..6d1e43d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb # sama5d3 +dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts new file mode 100644 index 0000000..ce13755 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -0,0 +1,229 @@ +/* + * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Xplained"; + compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; + }; + + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>; + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + uart0: serial@f0024000 { + status = "okay"; + }; + + mmc1: mmc@f8000000 { + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; + }; + }; + + spi1: spi@f8008000 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + >; + status = "okay"; + }; + + i2c2: i2c@f801c000 { + dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + ; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + ; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + ; /* PE9, conflicts with A9 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_LOW + &pioE 4 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + bp3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ + linux,default-trigger = "heartbeat"; + }; + + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; -- cgit v0.10.2 From 29ffa48fa64fcdfc71d80593c8ae79248bc27677 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Feb 2014 13:30:05 +0100 Subject: ARM: pxa: fix compilation problem on AM300EPD board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This board fails compilation like this: arch/arm/mach-pxa/am300epd.c: In function ‘am300_cleanup’: arch/arm/mach-pxa/am300epd.c:179:2: error: implicit declaration of function ‘PXA_GPIO_TO_IRQ’ [-Werror=implicit-function-declaration] free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); This was caused by commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" This is because it was previously getting the macro PXA_GPIO_TO_IRQ implicitly from which in turn implicitly included which in turn included . Add the missing include so that the board compiles again. Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index c9f309a..8b90c4f 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,6 +30,7 @@ #include #include +#include #include #include "generic.h" -- cgit v0.10.2 From 9705e74671f0e4f994d86b00cecf441917c64a66 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Feb 2014 13:53:07 +0100 Subject: ARM: pxa: fix various compilation problems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" some drivers fail compilation, for example like this: In file included from sound/soc/pxa/spitz.c:28:0: sound/soc/pxa/spitz.c: In function ‘spitz_ext_control’: arch/arm/mach-pxa/include/mach/spitz.h:111:30: error: ‘PXA_NR_BUILTIN_GPIO’ undeclared (first use in this function) #define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) (etc.) This is caused by implicit inclusion of from various board-specific headers under in the PXA platform. So we take a sweep over these, and for every such header that uses PXA_NR_BUILTIN_GPIO or PXA_GPIO_TO_IRQ() we explicitly #include "irqs.h" so that we satisfy the dependency in the board include file alone. Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 954641e..1b08259 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -14,6 +14,8 @@ #ifndef ASM_ARCH_BALLOON3_H #define ASM_ARCH_BALLOON3_H +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + enum balloon3_features { BALLOON3_FEATURE_OHCI, BALLOON3_FEATURE_MMC, diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index f3c3493..c030d95 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ /* * Corgi (Non Standard) GPIO Definitions diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 2628e7b..00cfbbb 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -11,6 +11,8 @@ #ifndef CSB726_H #define CSB726_H +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 #define CSB726_GPIO_MMC_DETECT 100 diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index dba14b6..f7df27b 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 22a96f8..7e63f46 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -23,6 +23,7 @@ * IDP hardware. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 2c447133..b184f29 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -13,6 +13,8 @@ #ifndef _INCLUDE_PALMLD_H_ #define _INCLUDE_PALMLD_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 0bd4f03..e342c59 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -15,6 +15,8 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index c383a21..81c727b 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTC_H_ #define _INCLUDE_PALMTC_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index f2e5303..92bc1f0 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTX_H_ #define _INCLUDE_PALMTX_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 6bf28de..86ebd7b 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -23,6 +23,8 @@ * Definitions of CPU card resources only */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) #define PCM027_BTDET_IRQ PCM027_IRQ(0) diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 0260aaa..7e544c1 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -20,6 +20,7 @@ */ #include +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index f32ff75..b56b193 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARCH_POODLE_H #define __ASM_ARCH_POODLE_H 1 +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* * GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 0bfe650..25c9f62 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -15,8 +15,8 @@ #define __ASM_ARCH_SPITZ_H 1 #endif +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ #include -#include /* Spitz/Akita GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 2bb0e86..0497d95 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -13,6 +13,8 @@ #ifndef _ASM_ARCH_TOSA_H_ #define _ASM_ARCH_TOSA_H_ 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + /* TOSA Chip selects */ #define TOSA_LCDC_PHYS PXA_CS4_PHYS /* Internel Scoop */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index d2ca010..ae3ca01 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -10,6 +10,8 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* physical memory regions */ #define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ #define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ -- cgit v0.10.2 From e7c57ecd6019cc6392223605aed18cce257c3eff Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 29 Jan 2014 17:10:04 +0100 Subject: ARM: imx6: Initialize low-power mode early again Since commit 9e8147bb5ec5d1dda2141da70f96b98985a306cb "ARM: imx6q: move low-power code out of clock driver" the kernel fails to boot on i.MX6Q/D if preemption is enabled (CONFIG_PREEMPT=y). The kernel just hangs before the console comes up. The above commit moved the initalization of the low-power mode setting (enabling clocked WAIT states), which was introduced in commit 83ae20981ae924c37d02a42c829155fc3851260c "ARM: imx: correct low-power mode setting", from imx6q_clks_init to imx6q_pm_init. Now it is called much later, after all cores are enabled. This patch moves the low-power mode initialization back to imx6q_clks_init again (and to imx6sl_clks_init). Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index af2e582..4d677f4 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (IS_ENABLED(CONFIG_PCI_IMX6)) clk_set_parent(clk[lvds1_sel], clk[sata_ref]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 3781a18..4c86f30 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) /* Audio-related clocks configuration */ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 9d47adc..7a9b985 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -236,8 +236,6 @@ void __init imx6q_pm_init(void) regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, IMX6Q_GPR1_GINT); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); suspend_set_ops(&imx6q_pm_ops); } -- cgit v0.10.2 From 5db1dabc562b27c356376fbb527a746dcf7c9572 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 6 Feb 2014 09:29:31 -0600 Subject: ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX Select CONFIG_SOC_DRA7XX so that we can boot dra7-evm. DRA7 family are A15 based processors that supports LPAE and an evolutionary update to the OMAP5 generation of processors. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 845bc74..ee69829 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y +CONFIG_SOC_DRA7XX=y CONFIG_SOC_AM43XX=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SOCFPGA=y -- cgit v0.10.2 From 46f5b96085b03f9e71a0134de77efc6a1f9d84c3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 31 Jan 2014 12:55:06 +0100 Subject: ARM: zynq: Reserve not DMAable space in front of the kernel Reserve space from 0x0 - __pa(swapper_pg_dir), if kernel is loaded from 0, which is not DMAable. It is causing problem with MMC driver and others which want to add dma buffers to this space. Signed-off-by: Michal Simek Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 1db2a5ca..8c09a83 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -41,6 +42,18 @@ void __iomem *zynq_scu_base; +/** + * zynq_memory_init - Initialize special memory + * + * We need to stop things allocating the low memory as DMA can't work in + * the 1st 512K of memory. + */ +static void __init zynq_memory_init(void) +{ + if (!__pa(PAGE_OFFSET)) + memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir)); +} + static struct platform_device zynq_cpuidle_device = { .name = "cpuidle-zynq", }; @@ -117,5 +130,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .init_machine = zynq_init_machine, .init_time = zynq_timer_init, .dt_compat = zynq_dt_match, + .reserve = zynq_memory_init, .restart = zynq_system_reset, MACHINE_END -- cgit v0.10.2 From 8858d88a25142544843869f0cd3e6654aa7b4aec Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 11 Feb 2014 14:02:37 +0100 Subject: ARM: ux500: disable msp2 device tree node Commit 70b41abc151f9 "ARM: ux500: move MSP pin control to the device tree" accidentally activated MSP2, giving rise to a boot scroll scream as the kernel attempts to probe a driver for it and fails to obtain DMA channel 14. Fix this up by marking the node disabled again. Acked-by: Lee Jones Signed-off-by: Linus Walleij Signed-off-by: Kevin Hilman diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 0c1e8d8..6cb9b68 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -188,7 +188,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { -- cgit v0.10.2 From 31fd8f5b89f22a88940a9838dfd1564f3d440247 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 3 Feb 2014 17:13:23 -0800 Subject: dma: mv_xor: Silence a bunch of LPAE-related warnings Enabling some of the mvebu platforms in the multiplatform config for ARM enabled these drivers, which also triggered a bunch of warnings when LPAE is enabled (thus making phys_addr_t 64-bit). Most changes are switching printk formats, but also a bit of changes to what used to be array-based pointer arithmetic that could just be done with the address types instead. The warnings were: drivers/dma/mv_xor.c: In function 'mv_xor_tx_submit': drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_alloc_chan_resources': drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_memcpy': drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_xor': drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat] Acked-by: Vinod Koul Acked-by: Jason Cooper Signed-off-by: Olof Johansson diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 53fb0c8..766b68e 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -497,8 +497,8 @@ mv_xor_tx_submit(struct dma_async_tx_descriptor *tx) if (!mv_can_chain(grp_start)) goto submit_done; - dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %x\n", - old_chain_tail->async_tx.phys); + dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %pa\n", + &old_chain_tail->async_tx.phys); /* fix up the hardware chain */ mv_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); @@ -527,7 +527,8 @@ submit_done: /* returns the number of allocated descriptors */ static int mv_xor_alloc_chan_resources(struct dma_chan *chan) { - char *hw_desc; + void *virt_desc; + dma_addr_t dma_desc; int idx; struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan); struct mv_xor_desc_slot *slot = NULL; @@ -542,17 +543,16 @@ static int mv_xor_alloc_chan_resources(struct dma_chan *chan) " %d descriptor slots", idx); break; } - hw_desc = (char *) mv_chan->dma_desc_pool_virt; - slot->hw_desc = (void *) &hw_desc[idx * MV_XOR_SLOT_SIZE]; + virt_desc = mv_chan->dma_desc_pool_virt; + slot->hw_desc = virt_desc + idx * MV_XOR_SLOT_SIZE; dma_async_tx_descriptor_init(&slot->async_tx, chan); slot->async_tx.tx_submit = mv_xor_tx_submit; INIT_LIST_HEAD(&slot->chain_node); INIT_LIST_HEAD(&slot->slot_node); INIT_LIST_HEAD(&slot->tx_list); - hw_desc = (char *) mv_chan->dma_desc_pool; - slot->async_tx.phys = - (dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE]; + dma_desc = mv_chan->dma_desc_pool; + slot->async_tx.phys = dma_desc + idx * MV_XOR_SLOT_SIZE; slot->idx = idx++; spin_lock_bh(&mv_chan->lock); @@ -582,8 +582,8 @@ mv_xor_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, int slot_cnt; dev_dbg(mv_chan_to_devp(mv_chan), - "%s dest: %x src %x len: %u flags: %ld\n", - __func__, dest, src, len, flags); + "%s dest: %pad src %pad len: %u flags: %ld\n", + __func__, &dest, &src, len, flags); if (unlikely(len < MV_XOR_MIN_BYTE_COUNT)) return NULL; @@ -626,8 +626,8 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, BUG_ON(len > MV_XOR_MAX_BYTE_COUNT); dev_dbg(mv_chan_to_devp(mv_chan), - "%s src_cnt: %d len: dest %x %u flags: %ld\n", - __func__, src_cnt, len, dest, flags); + "%s src_cnt: %d len: %u dest %pad flags: %ld\n", + __func__, src_cnt, len, &dest, flags); spin_lock_bh(&mv_chan->lock); slot_cnt = mv_chan_xor_slot_count(len, src_cnt); -- cgit v0.10.2