From 754a00aeb26bcc8bf82897538a078bc84a6d95c7 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Fri, 25 Dec 2009 20:08:45 +0100 Subject: arch/avr32: Fix build failure for avr32 caused by typo This patch fixes a build failure introduced by the patch atmel-mci: change use of dma slave interface by Nicolas Ferre by changing mci_dma_slave to the correct name of mci_dma_data This should make the avr32 tree build again. References: http://kisskb.ellerman.id.au/kisskb/buildresult/1893610/ http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commitdiff;h=2635d1ba711560d521f6218c585a3e0401f566e1 Patch against Linus' tree. Signed-off-by: Peter Huewe Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1aa1ea5..7d4ed42 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1325,7 +1325,7 @@ struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct platform_device *pdev; - struct mci_dma_slave *slave; + struct mci_dma_data *slave; u32 pioa_mask; u32 piob_mask; @@ -1344,7 +1344,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; - slave = kzalloc(sizeof(struct mci_dma_slave), GFP_KERNEL); + slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); slave->sdata.dma_dev = &dw_dmac0_device.dev; slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT; -- cgit v0.10.2 From cbf8de1620cdb1abb5b0618ff561004f816064fc Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 28 Dec 2009 12:22:06 +0100 Subject: avr32: clean up memory allocation in at32_add_device_mci This patch will check if the kzalloc for the MCI DMA struct actually returns a valid address, and also clean up properly if it fails or the function fails at a later stage. This also silences a compiler warning about using the slave variable uninitialized. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 7d4ed42..b13d187 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1345,6 +1345,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) goto fail; slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); + if (!slave) + goto fail; slave->sdata.dma_dev = &dw_dmac0_device.dev; slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT; @@ -1357,7 +1359,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) if (platform_device_add_data(pdev, data, sizeof(struct mci_platform_data))) - goto fail; + goto fail_free; /* CLK line is common to both slots */ pioa_mask = 1 << 10; @@ -1381,7 +1383,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) /* Slot is unused */ break; default: - goto fail; + goto fail_free; } select_peripheral(PIOA, pioa_mask, PERIPH_A, 0); @@ -1408,7 +1410,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) break; default: if (!data->slot[0].bus_width) - goto fail; + goto fail_free; data->slot[1].bus_width = 0; break; @@ -1419,9 +1421,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) platform_device_add(pdev); return pdev; +fail_free: + kfree(slave); fail: data->dma_slave = NULL; - kfree(slave); platform_device_put(pdev); return NULL; } -- cgit v0.10.2 From 7788cd5557766d49343088b2edc544b186e2fe53 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Dec 2009 16:19:56 +0100 Subject: [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two The PCIe inbound window size is supposed to be a power of two. If the total amount of RAM installed in the system is not a power of two, round it up such that it is. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index d41d41d..54c84a4 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base, } /* + * Round up 'size' to the nearest power of two. + */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + + /* * Setup BAR[1] to all DRAM banks. */ writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1)); -- cgit v0.10.2 From 6a5fa2362b628ee950080bef8895a6fb62f58ab4 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 1 Jan 2010 01:28:43 +0000 Subject: [CIFS] Add support for TCP_NODELAY mount option sockopt=TCP_NODELAY helpful for faster networks boosting performance. Kernel bugzilla bug number 14032. Signed-off-by: Steve French diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 7b2600b..49503d2 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,3 +1,7 @@ +Version 1.62 +------------ +Add sockopt=TCP_NODELAY mount option. + Version 1.61 ------------ Fix append problem to Samba servers (files opened with O_APPEND could diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index ac2b24c..78c1b86 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -113,5 +113,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* EXPERIMENTAL */ -#define CIFS_VERSION "1.61" +#define CIFS_VERSION "1.62" #endif /* _CIFSFS_H */ diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 4b35f7e..ed751bb 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -149,6 +149,7 @@ struct TCP_Server_Info { bool svlocal:1; /* local server or remote */ bool noblocksnd; /* use blocking sendmsg */ bool noautotune; /* do not autotune send buf sizes */ + bool tcp_nodelay; atomic_t inFlight; /* number of requests on the wire to server */ #ifdef CONFIG_CIFS_STATS2 atomic_t inSend; /* requests trying to send */ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 3bbcaa7..2e9e09c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -98,7 +98,7 @@ struct smb_vol { bool nostrictsync:1; /* do not force expensive SMBflush on every sync */ unsigned int rsize; unsigned int wsize; - unsigned int sockopt; + bool sockopt_tcp_nodelay:1; unsigned short int port; char *prepath; }; @@ -1142,9 +1142,11 @@ cifs_parse_mount_options(char *options, const char *devname, simple_strtoul(value, &value, 0); } } else if (strnicmp(data, "sockopt", 5) == 0) { - if (value && *value) { - vol->sockopt = - simple_strtoul(value, &value, 0); + if (!value || !*value) { + cERROR(1, ("no socket option specified")); + continue; + } else if (strnicmp(value, "TCP_NODELAY", 11) == 0) { + vol->sockopt_tcp_nodelay = 1; } } else if (strnicmp(data, "netbiosname", 4) == 0) { if (!value || !*value || (*value == ' ')) { @@ -1514,6 +1516,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info) tcp_ses->noblocksnd = volume_info->noblocksnd; tcp_ses->noautotune = volume_info->noautotune; + tcp_ses->tcp_nodelay = volume_info->sockopt_tcp_nodelay; atomic_set(&tcp_ses->inFlight, 0); init_waitqueue_head(&tcp_ses->response_q); init_waitqueue_head(&tcp_ses->request_q); @@ -1764,6 +1767,7 @@ static int ipv4_connect(struct TCP_Server_Info *server) { int rc = 0; + int val; bool connected = false; __be16 orig_port = 0; struct socket *socket = server->ssocket; @@ -1845,6 +1849,14 @@ ipv4_connect(struct TCP_Server_Info *server) socket->sk->sk_rcvbuf = 140 * 1024; } + if (server->tcp_nodelay) { + val = 1; + rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY, + (char *)&val, sizeof(val)); + if (rc) + cFYI(1, ("set TCP_NODELAY socket option error %d", rc)); + } + cFYI(1, ("sndbuf %d rcvbuf %d rcvtimeo 0x%lx", socket->sk->sk_sndbuf, socket->sk->sk_rcvbuf, socket->sk->sk_rcvtimeo)); @@ -1916,6 +1928,7 @@ static int ipv6_connect(struct TCP_Server_Info *server) { int rc = 0; + int val; bool connected = false; __be16 orig_port = 0; struct socket *socket = server->ssocket; @@ -1987,6 +2000,15 @@ ipv6_connect(struct TCP_Server_Info *server) */ socket->sk->sk_rcvtimeo = 7 * HZ; socket->sk->sk_sndtimeo = 5 * HZ; + + if (server->tcp_nodelay) { + val = 1; + rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY, + (char *)&val, sizeof(val)); + if (rc) + cFYI(1, ("set TCP_NODELAY socket option error %d", rc)); + } + server->ssocket = socket; return rc; -- cgit v0.10.2 From ea708ac9349e1eddbcf983c1d1234dc191c41da8 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 4 Jan 2010 10:58:28 -0500 Subject: powerpc/44x: Update PowerPC 44x board defconfigs Update the 44x defconfig files for 2.6.33 Signed-off-by: Josh Boyer diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 6f976b5..1f6d049 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Thu Aug 13 14:14:07 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:02:35 2010 # # CONFIG_PPC64 is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -83,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -198,6 +232,7 @@ CONFIG_ARCHES=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -241,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -352,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -392,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -404,9 +447,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -497,6 +540,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -573,16 +617,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -595,6 +640,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -640,6 +686,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -656,6 +703,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -696,11 +744,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -709,10 +752,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -730,6 +769,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -753,6 +797,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -779,6 +824,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -790,9 +836,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -810,10 +854,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -821,6 +868,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -858,6 +906,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -865,6 +914,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -934,7 +984,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -993,6 +1042,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1010,6 +1060,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1028,10 +1079,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1055,10 +1108,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1080,7 +1133,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index e57f1e4..788faac 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:33 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:09:03 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +79,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,8 +108,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -99,19 +123,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +180,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +235,8 @@ CONFIG_BAMBOO=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -218,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +300,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -265,6 +331,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +349,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -326,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -339,6 +405,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,8 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -365,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -386,6 +460,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -398,12 +473,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -423,7 +503,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -444,6 +528,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -462,7 +548,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -470,6 +559,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -480,9 +570,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -492,6 +586,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -501,14 +596,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -521,6 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -566,6 +661,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -582,6 +678,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -604,27 +705,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -649,7 +736,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -665,7 +752,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -676,14 +768,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -693,6 +788,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -746,7 +846,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -762,6 +861,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -776,11 +876,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -790,6 +892,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -798,16 +901,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -819,35 +929,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -863,13 +983,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -878,10 +1001,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -909,11 +1034,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -950,6 +1077,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -958,5 +1086,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index b312b166..4ef8bca 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 17:27:20 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:12:20 2010 # # CONFIG_PPC64 is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -83,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -198,6 +232,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y CONFIG_CANYONLANDS=y # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -241,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -352,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -392,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -404,9 +447,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -508,6 +551,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -585,16 +629,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -616,6 +662,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -661,6 +708,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -676,6 +724,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -717,11 +766,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TINY_USB is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -730,10 +774,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -751,6 +791,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -774,6 +819,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -800,6 +846,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -811,9 +858,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -831,10 +876,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -842,6 +890,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -882,10 +931,12 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -993,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1014,7 +1066,9 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1038,6 +1092,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1045,6 +1100,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1104,7 +1160,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1201,6 +1256,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1218,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1236,10 +1293,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1263,10 +1322,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1288,7 +1347,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index b652f7d..ca17b14 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:36 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:20:46 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,31 +107,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +234,8 @@ CONFIG_EBONY=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +299,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -338,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -350,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -376,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -453,7 +526,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +541,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +554,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +584,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -527,6 +609,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -545,7 +629,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -553,6 +640,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -563,9 +651,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -575,6 +667,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -584,14 +677,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -604,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -649,6 +742,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -665,6 +759,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -687,27 +786,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -732,7 +817,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -748,7 +833,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -759,14 +849,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -776,6 +869,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -840,7 +938,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -856,6 +953,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -871,11 +969,13 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -885,6 +985,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -893,16 +994,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -914,35 +1022,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -958,13 +1076,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -973,10 +1094,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1004,11 +1127,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1045,6 +1170,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig index 007f3bd..e3149ba 100644 --- a/arch/powerpc/configs/44x/eiger_defconfig +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Wed Aug 19 13:06:50 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:33:04 2010 # # CONFIG_PPC64 is not set @@ -34,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -57,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -84,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -122,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -145,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -170,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -243,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -358,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -387,14 +421,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -407,6 +438,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -419,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -522,6 +554,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -573,8 +606,11 @@ CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -611,7 +647,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -682,7 +721,9 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -711,12 +752,11 @@ CONFIG_E1000E=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -730,6 +770,7 @@ CONFIG_E1000E=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -775,6 +816,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -791,6 +833,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -831,11 +874,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -844,10 +882,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y @@ -865,7 +899,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -883,10 +916,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -894,6 +930,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -935,6 +972,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -942,6 +980,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1001,7 +1040,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1059,6 +1097,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1095,10 +1134,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1122,10 +1163,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1147,13 +1188,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1197,11 +1241,13 @@ CONFIG_CRYPTO_XTS=y # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c23a4ef..dec901f 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:38 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:55:34 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -83,8 +103,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -94,19 +118,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -118,6 +148,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -129,8 +166,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,19 +174,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -171,6 +229,8 @@ CONFIG_KATMAI=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -212,10 +272,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,10 +293,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -259,6 +324,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -276,14 +342,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -320,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -333,6 +398,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -345,8 +412,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -380,6 +453,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -392,12 +466,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -417,7 +496,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -440,6 +523,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -458,7 +543,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -466,6 +554,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -476,9 +565,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -488,6 +581,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -497,14 +591,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -517,6 +610,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -562,6 +656,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -578,13 +673,17 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -601,27 +700,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -646,7 +731,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -662,7 +747,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -673,14 +763,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -690,6 +783,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -743,7 +841,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -759,6 +856,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -773,11 +871,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -787,6 +887,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -795,16 +896,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -816,35 +924,43 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -859,13 +975,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -874,10 +993,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -905,11 +1026,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -946,6 +1069,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -954,5 +1078,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index b25fad1..8fed3b2 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:41 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:59:12 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,8 +107,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -98,19 +122,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -122,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -175,6 +234,8 @@ CONFIG_RAINIER=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -216,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -263,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -337,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -363,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -375,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -453,7 +527,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +542,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +555,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +585,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -533,6 +616,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -543,9 +627,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -555,6 +643,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -564,14 +653,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -584,6 +672,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -629,6 +718,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -645,6 +735,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -667,27 +762,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -712,7 +793,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -728,7 +809,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -739,14 +825,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -756,6 +845,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -820,7 +914,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -836,6 +929,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -851,11 +945,13 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -865,6 +961,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -873,16 +970,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -894,35 +998,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -942,6 +1056,7 @@ CONFIG_PPC_EARLY_DEBUG=y CONFIG_PPC_EARLY_DEBUG_44x=y # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set +# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 @@ -951,13 +1066,16 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -966,10 +1084,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -997,11 +1117,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1038,6 +1160,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1046,5 +1169,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig index ed31d4f..a67ec91 100644 --- a/arch/powerpc/configs/44x/redwood_defconfig +++ b/arch/powerpc/configs/44x/redwood_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Feb 4 14:31:09 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:05:05 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,6 +79,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -78,11 +87,13 @@ CONFIG_POSIX_MQUEUE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -93,8 +104,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -104,19 +119,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -128,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,14 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -177,6 +232,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set CONFIG_REDWOOD=y +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -219,10 +275,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -238,10 +296,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -262,12 +323,15 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -285,14 +349,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -329,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -342,6 +405,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -354,13 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -373,6 +438,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -385,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -462,7 +528,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -479,6 +544,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -512,10 +578,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -533,23 +595,30 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -558,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -569,8 +637,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_FUSION=y @@ -586,7 +658,11 @@ CONFIG_FUSION_MAX_SGE=128 # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -614,6 +690,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -632,7 +710,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -640,6 +721,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -650,19 +732,21 @@ CONFIG_E1000E=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -676,6 +760,7 @@ CONFIG_E1000E=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -721,6 +806,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -737,6 +823,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -777,11 +864,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -790,25 +872,23 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -826,31 +906,21 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -876,7 +946,12 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -887,14 +962,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -904,6 +982,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -958,7 +1041,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -974,6 +1056,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -988,11 +1071,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1002,6 +1087,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1010,16 +1096,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1031,35 +1124,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1075,13 +1178,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1092,10 +1198,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1123,11 +1231,13 @@ CONFIG_CRYPTO_XTS=y # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1164,6 +1274,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1172,5 +1283,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index e14e89a..886cb6a 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:42 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:11:24 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +79,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 @@ -89,8 +109,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -99,19 +123,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +153,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +179,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +234,8 @@ CONFIG_SAM440EP=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +299,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -264,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -338,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -350,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -385,6 +458,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -420,10 +494,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -440,8 +510,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y # CONFIG_SATA_PMP is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -463,6 +535,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -488,14 +561,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -508,7 +583,11 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -529,6 +608,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -547,17 +628,19 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -580,6 +663,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -589,6 +673,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -605,25 +690,30 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -639,6 +729,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -676,6 +767,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -691,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -733,11 +826,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TINY_USB is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -746,27 +834,23 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -784,31 +868,21 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -870,6 +944,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -899,7 +974,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -912,15 +986,18 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -933,10 +1010,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -962,17 +1040,20 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -992,11 +1073,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1038,7 +1119,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1054,6 +1134,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1090,9 +1171,11 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1110,15 +1193,22 @@ CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1130,6 +1220,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1142,10 +1233,13 @@ CONFIG_REISERFS_FS=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1155,6 +1249,11 @@ CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1267,6 +1366,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1281,11 +1381,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1295,27 +1397,29 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1326,7 +1430,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index 6400aae..1b2f41d 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Apr 7 17:04:52 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:15:51 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,6 +79,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -79,11 +87,13 @@ CONFIG_POSIX_MQUEUE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -121,6 +131,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -129,7 +146,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -137,6 +153,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,14 +180,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -186,6 +236,7 @@ CONFIG_SEQUOIA=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -228,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -247,9 +300,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -293,11 +345,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -339,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -353,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -390,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -493,6 +554,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -515,6 +577,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -534,14 +597,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -576,7 +642,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -584,6 +653,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,6 +664,9 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -619,12 +692,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -637,6 +709,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -682,6 +755,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -698,6 +772,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -720,27 +799,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -783,6 +848,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -793,14 +862,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +988,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -925,6 +998,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -933,16 +1007,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -954,11 +1035,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -968,27 +1050,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1004,13 +1089,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1052,11 +1140,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index ef32cc4..12041d3 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:47 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:21:04 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,8 +107,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -98,19 +122,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -122,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -175,6 +234,8 @@ CONFIG_TAISHAN=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -216,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -263,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -337,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -363,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -375,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -453,7 +527,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +542,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +555,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +585,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -529,6 +612,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -547,7 +632,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -555,6 +643,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -565,9 +654,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -577,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -586,14 +680,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -606,6 +699,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -651,6 +745,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -667,6 +762,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -689,27 +789,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -734,7 +820,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -750,7 +836,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -761,14 +852,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -778,6 +872,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -832,7 +931,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -848,6 +946,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -862,11 +961,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -876,6 +977,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -884,16 +986,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -905,35 +1014,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -949,13 +1068,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -964,10 +1086,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -995,11 +1119,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1036,6 +1162,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1044,5 +1171,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 787635f..99eff4d 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Tue Jun 9 23:35:36 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:27:46 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +60,13 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -81,11 +87,13 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -111,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,6 +131,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -131,7 +145,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -139,6 +152,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -151,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,14 +179,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,6 +234,7 @@ CONFIG_WARP=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -229,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -248,9 +298,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -356,6 +405,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -371,6 +421,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +434,13 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,6 +453,7 @@ CONFIG_VLAN_8021Q=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -407,9 +465,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -513,6 +571,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -524,9 +586,11 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_XILINX_SYSACE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -534,7 +598,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,15 +623,11 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -# CONFIG_SCSI_WAIT_SCAN is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -582,7 +644,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -609,14 +670,14 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -678,6 +739,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -693,6 +755,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -725,17 +788,17 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -761,10 +824,19 @@ CONFIG_GPIO_SYSFS=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -787,6 +859,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -812,6 +885,8 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -821,7 +896,6 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y @@ -855,26 +929,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -917,10 +980,11 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -988,6 +1052,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1014,7 +1079,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set -CONFIG_MMC_PIKASD=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1025,9 +1091,10 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y # CONFIG_LEDS_GPIO_PLATFORM is not set CONFIG_LEDS_GPIO_OF=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -1048,6 +1115,10 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1065,10 +1136,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1145,7 +1219,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1235,6 +1308,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1244,6 +1318,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1261,10 +1336,14 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1276,11 +1355,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1290,27 +1370,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1326,13 +1409,16 @@ CONFIG_IRQSTACKS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set @@ -1366,11 +1452,13 @@ CONFIG_CRYPTO_ALGAPI2=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 5e6d55f..46f5c47 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 08:43:46 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 13:42:17 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,11 +58,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,9 +80,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,31 +109,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -125,6 +154,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,8 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,20 +180,42 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -179,8 +236,11 @@ CONFIG_WARP=y CONFIG_ARCHES=y CONFIG_CANYONLANDS=y CONFIG_GLACIER=y +CONFIG_REDWOOD=y +CONFIG_EIGER=y CONFIG_YOSEMITE=y CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +# CONFIG_XILINX_ML510 is not set CONFIG_PPC44x_SIMPLE=y CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y @@ -190,6 +250,7 @@ CONFIG_440GP=y CONFIG_440GX=y CONFIG_440SPe=y CONFIG_460EX=y +CONFIG_460SX=y CONFIG_IBM440EP_ERR42=y CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_5_FXT=y @@ -207,6 +268,7 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y # CONFIG_SIMPLE_GPIO is not set +# CONFIG_XILINX_PCI is not set # # Kernel options @@ -230,10 +292,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -249,10 +313,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,6 +343,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,14 +361,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -352,6 +418,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -360,6 +427,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=m @@ -375,6 +443,8 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -387,8 +457,13 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,6 +476,7 @@ CONFIG_LLC=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -413,9 +489,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -490,7 +566,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -498,7 +573,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -516,6 +591,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -528,14 +604,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -558,10 +645,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -578,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -587,7 +671,11 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -608,6 +696,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -626,7 +716,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -634,6 +727,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -644,9 +738,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -656,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -665,14 +764,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -695,6 +794,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -713,6 +813,7 @@ CONFIG_SERIO=m # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set CONFIG_SERIO_XILINX_XPS_PS2=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -747,6 +848,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -764,6 +866,7 @@ CONFIG_XILINX_HWICAP=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -807,11 +910,6 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_TINY_USB is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -820,20 +918,17 @@ CONFIG_I2C_IBM_IIC=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -855,16 +950,21 @@ CONFIG_GPIO_XILINX=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -884,28 +984,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -961,6 +1048,7 @@ CONFIG_FB_XILINX=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -994,19 +1082,22 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y # CONFIG_USB_OHCI_HCD_PCI is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1030,11 +1121,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1075,7 +1166,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1083,6 +1173,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1091,6 +1182,7 @@ CONFIG_USB_STORAGE=m # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1100,7 +1192,12 @@ CONFIG_USB_STORAGE=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1110,6 +1207,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1119,11 +1217,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1133,6 +1233,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1206,7 +1311,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1261,6 +1365,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1278,11 +1383,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1292,6 +1399,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1300,16 +1408,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1321,35 +1436,43 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1363,13 +1486,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1378,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1409,11 +1537,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1450,6 +1580,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # -- cgit v0.10.2 From 02ea22896a66026f70ecee43527b15f9ca21b116 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 4 Jan 2010 10:59:32 -0500 Subject: powerpc/40x: Update the PowerPC 40x board defconfigs Update the 40x defconfigs for 2.6.33 Signed-off-by: Josh Boyer diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 173a5bb..8e95f8d 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:46 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:33:07 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_ACADIA=y # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -208,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -227,10 +288,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +318,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,14 +336,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -316,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -329,6 +392,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,8 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -355,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -367,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -445,7 +516,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -461,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -491,7 +562,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -512,6 +587,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -530,17 +607,18 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -553,6 +631,7 @@ CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -598,6 +677,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -614,6 +694,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -636,27 +721,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -678,7 +749,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -689,14 +765,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -706,6 +785,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -760,7 +844,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,6 +859,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -790,11 +874,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -804,6 +890,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -812,16 +899,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -833,35 +927,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -877,13 +981,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -892,10 +999,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -923,11 +1032,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -964,6 +1075,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -972,5 +1084,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e9b8495..918f23f 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:48 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:37:34 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set CONFIG_EP405=y # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -210,10 +269,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -229,10 +290,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -257,6 +320,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -274,14 +338,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -331,6 +394,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,8 +408,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -357,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -369,9 +440,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -447,7 +518,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +533,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -476,12 +547,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -501,7 +577,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -522,6 +602,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -540,7 +622,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -548,6 +633,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -558,9 +644,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -570,6 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -579,14 +670,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +699,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -653,6 +745,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -669,6 +762,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -691,27 +789,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -748,14 +832,16 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -775,11 +861,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -807,7 +893,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -822,6 +907,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -831,7 +917,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -842,14 +933,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -859,6 +953,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -913,7 +1012,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -927,8 +1025,48 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -943,11 +1081,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -957,6 +1097,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -965,16 +1106,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -986,35 +1134,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1030,13 +1188,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1045,10 +1206,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1076,11 +1239,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1117,6 +1282,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1125,5 +1291,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index 8c019d7..f87ef03 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:50 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:45:11 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set CONFIG_HCU4=y +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -208,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -227,10 +288,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +318,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,14 +336,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -316,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -329,6 +392,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,8 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -355,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -367,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -445,7 +516,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -461,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -473,12 +544,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -498,7 +574,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -519,6 +599,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -537,7 +619,10 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -545,6 +630,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -555,9 +641,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -567,6 +657,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -576,14 +667,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -596,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -641,6 +732,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -657,13 +749,17 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -680,27 +776,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -722,7 +804,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -733,14 +820,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -750,6 +840,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -804,7 +899,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -820,6 +914,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -834,11 +929,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +945,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -856,16 +954,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -877,35 +982,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -921,13 +1036,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -936,10 +1054,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -967,11 +1087,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1008,6 +1130,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1016,5 +1139,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 9a05ec0..19fbcb0 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 13:28:37 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:51:23 2010 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,7 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -52,6 +55,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -79,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -190,6 +224,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set CONFIG_KILAUEA=y # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -233,10 +268,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -252,8 +288,7 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -343,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -370,7 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -383,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -395,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -498,6 +541,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -574,16 +618,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -596,6 +641,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -641,6 +687,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -656,6 +703,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -696,11 +744,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -709,10 +752,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -730,6 +769,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -753,6 +797,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -779,6 +824,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -790,7 +836,6 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -810,10 +855,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -821,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -868,6 +917,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -889,7 +939,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -913,6 +965,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -920,6 +973,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -979,7 +1033,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1037,6 +1090,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1054,6 +1108,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1072,10 +1127,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1099,10 +1156,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1124,13 +1181,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1172,11 +1232,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 1467475..eb41cd6 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Wed Jun 3 09:11:02 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:55:12 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,14 +30,16 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -78,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -108,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,6 +127,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -129,7 +142,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -137,6 +149,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,14 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -178,6 +224,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set CONFIG_MAKALU=y # CONFIG_WALNUT is not set @@ -220,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -239,9 +288,8 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -330,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -344,6 +393,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -356,7 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -381,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -474,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -504,14 +562,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -546,16 +607,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -568,6 +631,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -613,6 +677,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -629,6 +694,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -651,27 +721,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -695,6 +751,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -705,14 +765,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -770,7 +833,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -818,6 +880,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -827,6 +890,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -844,10 +908,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,11 +927,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -873,24 +942,26 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -910,13 +981,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -958,11 +1032,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 5ab29dd..bfff0ea 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:57 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:56:30 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set CONFIG_WALNUT=y @@ -211,10 +270,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -230,10 +291,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +321,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,14 +339,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -319,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -332,6 +395,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,8 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -358,6 +428,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -370,9 +441,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -448,7 +519,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -464,6 +534,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -476,12 +547,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -501,7 +577,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -522,6 +602,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -540,7 +622,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -548,6 +633,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -558,9 +644,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -570,6 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -579,14 +670,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -599,6 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -644,6 +735,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -660,6 +752,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -682,27 +779,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -727,7 +810,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -743,7 +826,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -754,14 +842,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -771,6 +862,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -825,7 +921,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -841,6 +936,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -855,11 +951,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -869,6 +967,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -877,16 +976,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -898,35 +1004,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -942,13 +1058,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -957,10 +1076,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -988,11 +1109,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1029,6 +1152,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1037,5 +1161,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 326205c..35b6068 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 08:44:03 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 13:54:06 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -50,11 +54,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,9 +76,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,31 +105,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -121,6 +150,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,8 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,19 +177,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -168,12 +226,14 @@ CONFIG_XILINX_VIRTEX=y CONFIG_ACADIA=y CONFIG_EP405=y CONFIG_HCU4=y +CONFIG_HOTFOOT=y CONFIG_KILAUEA=y CONFIG_MAKALU=y CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_PPC40x_SIMPLE=y CONFIG_405GP=y +CONFIG_405EP=y CONFIG_405EX=y CONFIG_405EZ=y CONFIG_405GPR=y @@ -195,6 +255,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y # CONFIG_SIMPLE_GPIO is not set +# CONFIG_XILINX_PCI is not set # # Kernel options @@ -218,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +300,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +330,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +348,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -341,6 +405,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -349,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -362,6 +428,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -374,13 +442,13 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -393,6 +461,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -405,9 +474,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -483,7 +552,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -491,7 +559,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -509,6 +577,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -520,14 +589,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +627,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -568,6 +652,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -586,7 +672,10 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -594,6 +683,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -604,9 +694,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -616,6 +710,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -625,14 +720,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -645,6 +739,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -663,6 +758,7 @@ CONFIG_SERIO=m # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set CONFIG_SERIO_XILINX_XPS_PS2=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -697,6 +793,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -714,6 +811,7 @@ CONFIG_XILINX_HWICAP=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -756,11 +854,6 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -769,20 +862,17 @@ CONFIG_I2C_IBM_IIC=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -804,11 +894,17 @@ CONFIG_GPIO_XILINX=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -832,28 +928,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -909,6 +992,7 @@ CONFIG_FB_XILINX=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -930,7 +1014,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -946,7 +1030,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -956,6 +1045,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -966,11 +1056,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -980,6 +1072,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1053,7 +1150,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1108,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1125,11 +1222,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1139,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1147,16 +1247,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1168,35 +1275,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1212,13 +1329,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1227,10 +1347,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1258,11 +1380,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1299,6 +1423,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # @@ -1307,5 +1432,6 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 9f0727f5f41d21eb3da67e50965d1f30e054795f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 18:24:50 +0000 Subject: mx31ads: Allow enable/disable of switchable supplies They will be automatically powered off at startup so users will need to enable them for use. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 3e7bafa..609d402 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -302,6 +302,7 @@ static struct regulator_init_data ldo1_data = { .min_uV = 2800000, .max_uV = 2800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, }; @@ -322,6 +323,7 @@ static struct regulator_init_data ldo2_data = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), -- cgit v0.10.2 From bd02acdbb28be99ed87ec11c3ef61a5eec4e2dd7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jan 2010 16:05:15 +0000 Subject: mx31ads: Provide a name for EXPIO interrupt chip This makes it a bit more obvious in genirq diagnostics that they aren't handled by the i.MX interrupt controller. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 609d402..e205456 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq) } static struct irq_chip expio_irq_chip = { + .name = "EXPIO(CPLD)", .ack = expio_ack_irq, .mask = expio_mask_irq, .unmask = expio_unmask_irq, -- cgit v0.10.2 From 3d661ac187e72af71d3bb7d48a46012180a6fc46 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jan 2010 16:05:16 +0000 Subject: mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module The WM8350 core won't actually use the range yet, but it will in future and the platform data to configure it is there now. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index e205456..938c549 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -462,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { .init = mx31_wm8350_init, + .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, }; #endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index ead9d59..0cb3476 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -37,7 +37,12 @@ * within sensible limits. */ #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) + +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +#define MXC_BOARD_IRQS 80 +#else #define MXC_BOARD_IRQS 16 +#endif #define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) -- cgit v0.10.2 From 81143d2a65364ce5ae5c97b4c10d7d9bbe4428fd Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Thu, 5 Jun 2008 13:26:28 +0200 Subject: [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 8bf4153..3bf6304 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -53,6 +54,11 @@ static void __init rd88f6192_init(void) */ kirkwood_init(); + orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1); + if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 || + gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0) + pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n"); + kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6192_ge00_data); kirkwood_sata_init(&rd88f6192_sata_data); -- cgit v0.10.2 From 1dd473fdf1d8a7531e0955480cd129f9c1e8b8a3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 12 Jan 2010 03:37:45 +0900 Subject: ocfs2: Fix refcnt leak on ocfs2_fast_follow_link() error path If ->follow_link handler returns an error, it should decrement nd->path refcnt. But ocfs2_fast_follow_link() doesn't decrement. This patch fixes the problem by using nd_set_link() style error handling instead of playing with nd->path. Signed-off-by: OGAWA Hirofumi Signed-off-by: Joel Becker diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c index 49b133c..32499d21 100644 --- a/fs/ocfs2/symlink.c +++ b/fs/ocfs2/symlink.c @@ -137,20 +137,20 @@ static void *ocfs2_fast_follow_link(struct dentry *dentry, } memcpy(link, target, len); - nd_set_link(nd, link); bail: + nd_set_link(nd, status ? ERR_PTR(status) : link); brelse(bh); mlog_exit(status); - return status ? ERR_PTR(status) : link; + return NULL; } static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie) { - char *link = cookie; - - kfree(link); + char *link = nd_get_link(nd); + if (!IS_ERR(link)) + kfree(link); } const struct inode_operations ocfs2_symlink_inode_operations = { -- cgit v0.10.2 From 0f585f14d4e34ab701283e9237ac7695cd7c9e31 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 12 Jan 2010 03:36:57 +0900 Subject: GFS2: Fix refcnt leak on gfs2_follow_link() error path If ->follow_link handler return the error, it should decrement nd->path refcnt. This patch fix it. Signed-off-by: OGAWA Hirofumi Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index 78f73ca..84350e1 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -1088,7 +1088,8 @@ static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd) error = vfs_follow_link(nd, buf); if (buf != array) kfree(buf); - } + } else + path_put(&nd->path); return ERR_PTR(error); } -- cgit v0.10.2 From 7b4e08a77f0cbfe31b47faf082caa02f9c252266 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jan 2010 16:33:18 +0000 Subject: MXC: Add AUDMUXv2 register decode to debugfs Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 6f21096..b06954a 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,140 @@ static void __iomem *audmux_base; #define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) #define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) +#ifdef CONFIG_DEBUG_FS +static struct dentry *audmux_debugfs_root; + +static int audmux_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +/* There is an annoying discontinuity in the SSI numbering with regard + * to the Linux number of the devices */ +static const char *audmux_port_string(int port) +{ + switch (port) { + case MX31_AUDMUX_PORT1_SSI0: + return "imx-ssi.0"; + case MX31_AUDMUX_PORT2_SSI1: + return "imx-ssi.1"; + case MX31_AUDMUX_PORT3_SSI_PINS_3: + return "SSI3"; + case MX31_AUDMUX_PORT4_SSI_PINS_4: + return "SSI4"; + case MX31_AUDMUX_PORT5_SSI_PINS_5: + return "SSI5"; + case MX31_AUDMUX_PORT6_SSI_PINS_6: + return "SSI6"; + default: + return "UNKNOWN"; + } +} + +static ssize_t audmux_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + int port = (int)file->private_data; + u32 pdcr, ptcr; + + if (!buf) + return -ENOMEM; + + if (audmux_clk) + clk_enable(audmux_clk); + + ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); + pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); + + if (audmux_clk) + clk_disable(audmux_clk); + + ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", + pdcr, ptcr); + + if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxFS output from %s, ", + audmux_port_string((ptcr >> 27) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxFS input, "); + + if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxClk output from %s", + audmux_port_string((ptcr >> 22) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxClk input"); + + ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); + + if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) { + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "Port is symmetric"); + } else { + if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxFS output from %s, ", + audmux_port_string((ptcr >> 17) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxFS input, "); + + if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxClk output from %s", + audmux_port_string((ptcr >> 12) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxClk input"); + } + + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "\nData received from %s\n", + audmux_port_string((pdcr >> 13) & 0x7)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + + kfree(buf); + + return ret; +} + +static const struct file_operations audmux_debugfs_fops = { + .open = audmux_open_file, + .read = audmux_read_file, +}; + +static void audmux_debugfs_init(void) +{ + int i; + char buf[20]; + + audmux_debugfs_root = debugfs_create_dir("audmux", NULL); + if (!audmux_debugfs_root) { + pr_warning("Failed to create AUDMUX debugfs root\n"); + return; + } + + for (i = 1; i < 8; i++) { + snprintf(buf, sizeof(buf), "ssi%d", i); + if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, + (void *)i, &audmux_debugfs_fops)) + pr_warning("Failed to create AUDMUX port %d debugfs file\n", + i); + } +} +#else +static inline void audmux_debugfs_init(void) +{ +} +#endif + int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, unsigned int pdcr) { @@ -68,6 +203,8 @@ static int mxc_audmux_v2_init(void) if (cpu_is_mx31() || cpu_is_mx35()) audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); + audmux_debugfs_init(); + return 0; } -- cgit v0.10.2 From 0375fc03cd0bd31fb8b37e40f091f8ffc567acfd Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 11 Jan 2010 15:43:24 +0800 Subject: [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus There is no such GPIO for udc vbus sensing, put '-1' instead of default '0' as '0' does mean a valid GPIO. Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 74446cf..da3156d86 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { + .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; -- cgit v0.10.2 From 463de2096d8040af2f79f8c4f6a61c965a5109f0 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 4 Jan 2010 15:22:18 +0800 Subject: [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x GPIO89_AC97_nRESET is really a PXA26x specific option and was incorrectly named. Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index b13dc02..9c78785 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -169,7 +169,6 @@ #define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH) #define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH) #define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH) -#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) /* USB */ #define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1) @@ -186,6 +185,9 @@ #define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) #define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1) #define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) -#endif + +/* AC97 */ +#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) +#endif /* CONFIG_CPU_PXA26x */ #endif /* __ASM_ARCH_MFP_PXA25X_H */ -- cgit v0.10.2 From c70f5a60994058895384f593989a9fbe6fe6adee Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 11 Jan 2010 20:39:37 +0800 Subject: [ARM] pxa: fix irq suspend/resume for pxa25x PXA25x does not have IPR registers, saving and restoring should happen only for pxa27x and pxa3xx. Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 6112af4..1beb40f 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - saved_ipr[i] = IPR(i); + + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); + } return 0; } @@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev) { int i, irq = PXA_IRQ(0); + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; + } + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - IPR(i) = saved_ipr[i]; ICCR = 1; return 0; -- cgit v0.10.2 From 292e0041c3b22c5347092152504d814119554b57 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 9 Dec 2009 06:56:40 -0500 Subject: [CPUFREQ] fix default value for ondemand governor Signed-off-by: Mike Frysinger Signed-off-by: Dave Jones diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index aed082f..737988f 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT. up_threshold: defines what the average CPU usage between the samplings of 'sampling_rate' needs to be for the kernel to make a decision on whether it should increase the frequency. For example when it is set -to its default value of '80' it means that between the checking -intervals the CPU needs to be on average more than 80% in use to then +to its default value of '95' it means that between the checking +intervals the CPU needs to be on average more than 95% in use to then decide that the CPU frequency needs to be increased. ignore_nice_load: this parameter takes a value of '0' or '1'. When -- cgit v0.10.2 From 557a701c16553b0b691dbb64ef30361115a80f64 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 14 Dec 2009 11:44:15 +0100 Subject: [CPUFREQ] Fix use after free of struct powernow_k8_data Easy fix for a regression introduced in 2.6.31. On managed CPUs the cpufreq.c core will call driver->exit(cpu) on the managed cpus and powernow_k8 will free the core's data. Later driver->get(cpu) function might get called trying to read out the current freq of a managed cpu and the NULL pointer check does not work on the freed object -> better set it to NULL. ->get() is unsigned and must return 0 as invalid frequency. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14391 Signed-off-by: Thomas Renninger Tested-by: Michal Schmidt CC: stable@kernel.org Signed-off-by: Dave Jones diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index a9df944..2da4fa3 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1356,6 +1356,7 @@ static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) kfree(data->powernow_table); kfree(data); + per_cpu(powernow_data, pol->cpu) = NULL; return 0; } @@ -1375,7 +1376,7 @@ static unsigned int powernowk8_get(unsigned int cpu) int err; if (!data) - return -EINVAL; + return 0; smp_call_function_single(cpu, query_values_on_cpu, &err, true); if (err) -- cgit v0.10.2 From 1dbf58881f307e21a3df4b990a5bea401360d02e Mon Sep 17 00:00:00 2001 From: "Nagananda.Chumbalkar@hp.com" Date: Mon, 21 Dec 2009 23:40:52 +0100 Subject: [CPUFREQ] Fix ondemand to not request targets outside policy limits Dominik said: target_freq cannot be below policy->min or above policy->max. If it were, the whole cpufreq subsystem is broken. But (answer): I think the "ondemand" governor can ask for a target frequency that is below policy->min. ... A patch such as below may be needed to sanitize the target frequency requested by "ondemand". The "conservative" governor already has this check: Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones # diff -bur x/drivers/cpufreq/cpufreq_ondemand.c.orig y/drivers/cpufreq/cpufreq_ondemand.c diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 4b34ade..bd444dc 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -554,6 +554,9 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) (dbs_tuners_ins.up_threshold - dbs_tuners_ins.down_differential); + if (freq_next < policy->min) + freq_next = policy->min; + if (!dbs_tuners_ins.powersave_bias) { __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L); -- cgit v0.10.2 From e9cfa167b6b598a364c53459bee93b508f073c65 Mon Sep 17 00:00:00 2001 From: Dirk Teurlings Date: Wed, 13 Jan 2010 20:03:30 +0100 Subject: [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 Signed-off-by: Dirk Teurlings Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 1b4ad9d..cb0feca 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -15,6 +15,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -24,6 +27,80 @@ #include "common.h" #include "mpp.h" +/* + * LEDs attached to GPIO + */ +static struct gpio_led wrt350n_v2_led_pins[] = { + { + .name = "wrt350nv2:green:power", + .gpio = 0, + .active_low = 1, + }, { + .name = "wrt350nv2:green:security", + .gpio = 1, + .active_low = 1, + }, { + .name = "wrt350nv2:orange:power", + .gpio = 5, + .active_low = 1, + }, { + .name = "wrt350nv2:green:usb", + .gpio = 6, + .active_low = 1, + }, { + .name = "wrt350nv2:green:wireless", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data wrt350n_v2_led_data = { + .leds = wrt350n_v2_led_pins, + .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), +}; + +static struct platform_device wrt350n_v2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wrt350n_v2_led_data, + }, +}; + +/* + * Buttons attached to GPIO + */ +static struct gpio_keys_button wrt350n_v2_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 3, + .desc = "Reset Button", + .active_low = 1, + }, { + .code = KEY_WLAN, + .gpio = 2, + .desc = "WPS Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data wrt350n_v2_button_data = { + .buttons = wrt350n_v2_buttons, + .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), +}; + +static struct platform_device wrt350n_v2_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &wrt350n_v2_button_data, + }, +}; + +/* + * General setup + */ static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { { 0, MPP_GPIO }, /* Power LED green (0=on) */ { 1, MPP_GPIO }, /* Security LED (0=on) */ @@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void) orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); + platform_device_register(&wrt350n_v2_leds); + platform_device_register(&wrt350n_v2_button_device); } static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -- cgit v0.10.2 From e6622df3bb1a8e1135f4b84928e24d4c6802f6b5 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 7 Jan 2010 08:04:59 -0500 Subject: [SCSI] lpfc: fix file permissions lpfc_hbadisc.c and lpfc_hw4.h accidentally got set executable. Reported-by: Thomas Backlund Cc: James Smart Signed-off-by: James Bottomley diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c old mode 100755 new mode 100644 diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h old mode 100755 new mode 100644 -- cgit v0.10.2 From cacb6dc3d7fea751879a225c15e48228415e6359 Mon Sep 17 00:00:00 2001 From: "Penchala Narasimha Reddy Chilakala, ERS-HCLTech" Date: Mon, 21 Dec 2009 18:39:27 +0530 Subject: [SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy Signed-off-by: James Bottomley diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 2a88985..7e26ebc 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -293,7 +293,10 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) status = -EINVAL; } } - aac_fib_complete(fibptr); + /* Do not set XferState to zero unless receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); + /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ if (status >= 0) { if ((aac_commit == 1) || commit_flag) { @@ -310,13 +313,18 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) FsaNormal, 1, 1, NULL, NULL); - aac_fib_complete(fibptr); + /* Do not set XferState to zero unless + * receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); } else if (aac_commit == 0) { printk(KERN_WARNING "aac_get_config_status: Foreign device configurations are being ignored\n"); } } - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); return status; } @@ -355,7 +363,9 @@ int aac_get_containers(struct aac_dev *dev) maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries); aac_fib_complete(fibptr); } - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS) maximum_num_containers = MAXIMUM_NUM_CONTAINERS; @@ -1245,8 +1255,12 @@ int aac_get_adapter_info(struct aac_dev* dev) NULL); if (rcode < 0) { - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* FIB should be freed only after + * getting the response from the F/W */ + if (rcode != -ERESTARTSYS) { + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + } return rcode; } memcpy(&dev->adapter_info, info, sizeof(*info)); @@ -1270,6 +1284,12 @@ int aac_get_adapter_info(struct aac_dev* dev) if (rcode >= 0) memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo)); + if (rcode == -ERESTARTSYS) { + fibptr = aac_fib_alloc(dev); + if (!fibptr) + return -ENOMEM; + } + } @@ -1470,9 +1490,11 @@ int aac_get_adapter_info(struct aac_dev* dev) (dev->scsi_host_ptr->sg_tablesize * 8) + 112; } } - - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (rcode != -ERESTARTSYS) { + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + } return rcode; } @@ -1633,6 +1655,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) * Alocate and initialize a Fib */ if (!(cmd_fibcontext = aac_fib_alloc(dev))) { + printk(KERN_WARNING "aac_read: fib allocation failed\n"); return -1; } @@ -1712,9 +1735,14 @@ static int aac_write(struct scsi_cmnd * scsicmd) * Allocate and initialize a Fib then setup a BlockWrite command */ if (!(cmd_fibcontext = aac_fib_alloc(dev))) { - scsicmd->result = DID_ERROR << 16; - scsicmd->scsi_done(scsicmd); - return 0; + /* FIB temporarily unavailable,not catastrophic failure */ + + /* scsicmd->result = DID_ERROR << 16; + * scsicmd->scsi_done(scsicmd); + * return 0; + */ + printk(KERN_WARNING "aac_write: fib allocation failed\n"); + return -1; } status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 83986ed..619c02d 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2461 +# define AAC_DRIVER_BUILD 24702 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -1036,6 +1036,9 @@ struct aac_dev u8 printf_enabled; u8 in_reset; u8 msi; + int management_fib_count; + spinlock_t manage_lock; + }; #define aac_adapter_interrupt(dev) \ diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 0391d75..9c0c911 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -153,7 +153,7 @@ cleanup: fibptr->hw_fib_pa = hw_fib_pa; fibptr->hw_fib_va = hw_fib; } - if (retval != -EINTR) + if (retval != -ERESTARTSYS) aac_fib_free(fibptr); return retval; } @@ -322,7 +322,7 @@ return_fib: } if (f.wait) { if(down_interruptible(&fibctx->wait_sem) < 0) { - status = -EINTR; + status = -ERESTARTSYS; } else { /* Lock again and retry */ spin_lock_irqsave(&dev->fib_lock, flags); @@ -593,10 +593,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) u64 addr; void* p; if (upsg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -645,10 +645,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) u64 addr; void* p; if (usg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -695,10 +695,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) uintptr_t addr; void* p; if (usg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -734,10 +734,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) dma_addr_t addr; void* p; if (upsg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -772,8 +772,8 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) psg->count = cpu_to_le32(sg_indx+1); status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL); } - if (status == -EINTR) { - rcode = -EINTR; + if (status == -ERESTARTSYS) { + rcode = -ERESTARTSYS; goto cleanup; } @@ -810,7 +810,7 @@ cleanup: for(i=0; i <= sg_indx; i++){ kfree(sg_list[i]); } - if (rcode != -EINTR) { + if (rcode != -ERESTARTSYS) { aac_fib_complete(srbfib); aac_fib_free(srbfib); } @@ -848,7 +848,7 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) */ status = aac_dev_ioctl(dev, cmd, arg); - if(status != -ENOTTY) + if (status != -ENOTTY) return status; switch (cmd) { diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 666d515..a726148 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -194,7 +194,9 @@ int aac_send_shutdown(struct aac_dev * dev) if (status >= 0) aac_fib_complete(fibctx); - aac_fib_free(fibctx); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibctx); return status; } @@ -304,6 +306,8 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) /* * Check the preferred comm settings, defaults from template. */ + dev->management_fib_count = 0; + spin_lock_init(&dev->manage_lock); dev->max_fib_size = sizeof(struct hw_fib); dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size - sizeof(struct aac_fibhdr) diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 956261f..94d2954 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -189,7 +189,14 @@ struct fib *aac_fib_alloc(struct aac_dev *dev) void aac_fib_free(struct fib *fibptr) { - unsigned long flags; + unsigned long flags, flagsv; + + spin_lock_irqsave(&fibptr->event_lock, flagsv); + if (fibptr->done == 2) { + spin_unlock_irqrestore(&fibptr->event_lock, flagsv); + return; + } + spin_unlock_irqrestore(&fibptr->event_lock, flagsv); spin_lock_irqsave(&fibptr->dev->fib_lock, flags); if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) @@ -390,6 +397,8 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, struct hw_fib * hw_fib = fibptr->hw_fib_va; unsigned long flags = 0; unsigned long qflags; + unsigned long mflags = 0; + if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) return -EBUSY; @@ -471,9 +480,31 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!dev->queues) return -EBUSY; - if(wait) + if (wait) { + + spin_lock_irqsave(&dev->manage_lock, mflags); + if (dev->management_fib_count >= AAC_NUM_MGT_FIB) { + printk(KERN_INFO "No management Fibs Available:%d\n", + dev->management_fib_count); + spin_unlock_irqrestore(&dev->manage_lock, mflags); + return -EBUSY; + } + dev->management_fib_count++; + spin_unlock_irqrestore(&dev->manage_lock, mflags); spin_lock_irqsave(&fibptr->event_lock, flags); - aac_adapter_deliver(fibptr); + } + + if (aac_adapter_deliver(fibptr) != 0) { + printk(KERN_ERR "aac_fib_send: returned -EBUSY\n"); + if (wait) { + spin_unlock_irqrestore(&fibptr->event_lock, flags); + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + } + return -EBUSY; + } + /* * If the caller wanted us to wait for response wait now. @@ -516,14 +547,15 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, udelay(5); } } else if (down_interruptible(&fibptr->event_wait)) { - fibptr->done = 2; - up(&fibptr->event_wait); + /* Do nothing ... satisfy + * down_interruptible must_check */ } + spin_lock_irqsave(&fibptr->event_lock, flags); - if ((fibptr->done == 0) || (fibptr->done == 2)) { + if (fibptr->done == 0) { fibptr->done = 2; /* Tell interrupt we aborted */ spin_unlock_irqrestore(&fibptr->event_lock, flags); - return -EINTR; + return -ERESTARTSYS; } spin_unlock_irqrestore(&fibptr->event_lock, flags); BUG_ON(fibptr->done == 0); @@ -689,6 +721,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) int aac_fib_complete(struct fib *fibptr) { + unsigned long flags; struct hw_fib * hw_fib = fibptr->hw_fib_va; /* @@ -709,6 +742,13 @@ int aac_fib_complete(struct fib *fibptr) * command is complete that we had sent to the adapter and this * cdb could be reused. */ + spin_lock_irqsave(&fibptr->event_lock, flags); + if (fibptr->done == 2) { + spin_unlock_irqrestore(&fibptr->event_lock, flags); + return 0; + } + spin_unlock_irqrestore(&fibptr->event_lock, flags); + if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) && (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed))) { @@ -1355,7 +1395,10 @@ int aac_reset_adapter(struct aac_dev * aac, int forced) if (status >= 0) aac_fib_complete(fibctx); - aac_fib_free(fibctx); + /* FIB should be freed only after getting + * the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibctx); } } @@ -1759,6 +1802,7 @@ int aac_command_thread(void *data) struct fib *fibptr; if ((fibptr = aac_fib_alloc(dev))) { + int status; __le32 *info; aac_fib_init(fibptr); @@ -1769,15 +1813,21 @@ int aac_command_thread(void *data) *info = cpu_to_le32(now.tv_sec); - (void)aac_fib_send(SendHostTime, + status = aac_fib_send(SendHostTime, fibptr, sizeof(*info), FsaNormal, 1, 1, NULL, NULL); - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* Do not set XferState to zero unless + * receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); + /* FIB should be freed only after + * getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); } difference = (long)(unsigned)update_interval*HZ; } else { diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index abc9ef5..9c7408fe 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -57,9 +57,9 @@ unsigned int aac_response_normal(struct aac_queue * q) struct hw_fib * hwfib; struct fib * fib; int consumed = 0; - unsigned long flags; + unsigned long flags, mflags; - spin_lock_irqsave(q->lock, flags); + spin_lock_irqsave(q->lock, flags); /* * Keep pulling response QEs off the response queue and waking * up the waiters until there are no more QEs. We then return @@ -125,12 +125,21 @@ unsigned int aac_response_normal(struct aac_queue * q) } else { unsigned long flagv; spin_lock_irqsave(&fib->event_lock, flagv); - if (!fib->done) + if (!fib->done) { fib->done = 1; - up(&fib->event_wait); + up(&fib->event_wait); + } spin_unlock_irqrestore(&fib->event_lock, flagv); + + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + FIB_COUNTER_INCREMENT(aac_config.NormalRecved); if (fib->done == 2) { + spin_lock_irqsave(&fib->event_lock, flagv); + fib->done = 0; + spin_unlock_irqrestore(&fib->event_lock, flagv); aac_fib_complete(fib); aac_fib_free(fib); } @@ -232,6 +241,7 @@ unsigned int aac_command_normal(struct aac_queue *q) unsigned int aac_intr_normal(struct aac_dev * dev, u32 index) { + unsigned long mflags; dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index)); if ((index & 0x00000002L)) { struct hw_fib * hw_fib; @@ -320,11 +330,25 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 index) unsigned long flagv; dprintk((KERN_INFO "event_wait up\n")); spin_lock_irqsave(&fib->event_lock, flagv); - if (!fib->done) + if (!fib->done) { fib->done = 1; - up(&fib->event_wait); + up(&fib->event_wait); + } spin_unlock_irqrestore(&fib->event_lock, flagv); + + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + FIB_COUNTER_INCREMENT(aac_config.NormalRecved); + if (fib->done == 2) { + spin_lock_irqsave(&fib->event_lock, flagv); + fib->done = 0; + spin_unlock_irqrestore(&fib->event_lock, flagv); + aac_fib_complete(fib); + aac_fib_free(fib); + } + } return 0; } -- cgit v0.10.2 From f1053a7ca9ce095d95bcc1cf41684c5e4f3e7751 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Sat, 12 Dec 2009 14:52:21 +0100 Subject: [SCSI] mptsas: Fix issue with chain pools allocation on katmai Since commit 9d2e9d66a3f032667934144cd61c396ba49f090d mptsas driver fails to allocate memory for the MPT chain buffers for second LSI adapter on PPC440SPe Katmai platform: ... ioc1: LSISAS1068E B3: Capabilities={Initiator} mptbase: ioc1: ERROR - Unable to allocate Reply, Request, Chain Buffers! mptbase: ioc1: ERROR - didn't initialize properly! (-3) mptsas: probe of 0002:31:00.0 failed with error -3 This commit increased MPT_FC_CAN_QUEUE value but initChainBuffers() doesn't differentiate between SAS and FC causing increased allocation for SAS case, too. Later pci_alloc_consistent() fails to allocate increased chain buffer pool size for SAS case. Provide a fix by looking at the bus type and using appropriate MPT_SAS_CAN_QUEUE value while calculation of the number of chain buffers. Signed-off-by: Anatolij Gustschin Acked-by: Kashyap Desai Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 85bc6a6..44d2037 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -4330,6 +4330,8 @@ initChainBuffers(MPT_ADAPTER *ioc) if (ioc->bus_type == SPI) num_chain *= MPT_SCSI_CAN_QUEUE; + else if (ioc->bus_type == SAS) + num_chain *= MPT_SAS_CAN_QUEUE; else num_chain *= MPT_FC_CAN_QUEUE; -- cgit v0.10.2 From 63c43b0ec1765b74c734d465ba6345ef4f434df8 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 15 Dec 2009 17:25:43 +0200 Subject: [SCSI] scsi_lib: Fix bug in completion of bidi commands Because of the terrible structuring of scsi-bidi-commands it breaks some of the life time rules of a scsi-command. It is now not allowed to free up the block-request before cleanup and partial deallocation of the scsi-command. (Which is not so for none bidi commands) The right fix to this problem would be to make bidi command a first citizen by allocating a scsi_sdb pointer at scsi command just like cmd->prot_sdb. The bidi sdb should be allocated/deallocated as part of the get/put_command (Again like the prot_sdb) and the current decoupling of scsi_cmnd and blk-request should be kept. For now make sure scsi_release_buffers() is called before the call to blk_end_request_all() which might cause the suicide of the block requests. At best the leak of bidi buffers, at worse a crash, as there is a race between the existence of the bidi_request and the free of the associated bidi_sdb. The reason this was never hit before is because only OSD has the potential of doing asynchronous bidi commands. (So does bsg but it is never used) And OSD clients just happen to do all their bidi commands synchronously, up until recently. CC: Stable Tree Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d892768..c664242 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -749,9 +749,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ req->next_rq->resid_len = scsi_in(cmd)->resid; + scsi_release_buffers(cmd); blk_end_request_all(req, 0); - scsi_release_buffers(cmd); scsi_next_command(cmd); return; } -- cgit v0.10.2 From f08b7251c40090b8c522a306642944cd7322eebb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 12 Jan 2010 12:59:48 -0800 Subject: [SCSI] qla2xxx: Correct FCP2 recovery handling. The driver did not account for non-tape devices needing to employ proper FCP2 recovery. Driver now checks the FCP2-capable flag only, rather than using a midlayer-determined flag (TYPE_TAPE). Signed-off-by: Andrew Vasquez Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 608e675..1263d97 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1586,8 +1586,7 @@ typedef struct fc_port { */ #define FCF_FABRIC_DEVICE BIT_0 #define FCF_LOGIN_NEEDED BIT_1 -#define FCF_TAPE_PRESENT BIT_2 -#define FCF_FCP2_DEVICE BIT_3 +#define FCF_FCP2_DEVICE BIT_2 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b4a0eac..3f8e849 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -205,7 +205,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, switch (data[0]) { case MBS_COMMAND_COMPLETE: - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) opts |= BIT_1; rval = qla2x00_get_port_database(vha, fcport, opts); if (rval != QLA_SUCCESS) @@ -2726,7 +2726,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) /* * Logout all previous fabric devices marked lost, except - * tape devices. + * FCP2 devices. */ list_for_each_entry(fcport, &vha->vp_fcports, list) { if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) @@ -2739,7 +2739,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) qla2x00_mark_device_lost(vha, fcport, ql2xplogiabsentdevice, 0); if (fcport->loop_id != FC_NO_LOOP_ID && - (fcport->flags & FCF_TAPE_PRESENT) == 0 && + (fcport->flags & FCF_FCP2_DEVICE) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { ha->isp_ops->fabric_logout(vha, @@ -3018,7 +3018,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, fcport->d_id.b24 = new_fcport->d_id.b24; fcport->flags |= FCF_LOGIN_NEEDED; if (fcport->loop_id != FC_NO_LOOP_ID && - (fcport->flags & FCF_TAPE_PRESENT) == 0 && + (fcport->flags & FCF_FCP2_DEVICE) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { ha->isp_ops->fabric_logout(vha, fcport->loop_id, @@ -3272,9 +3272,9 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport, rval = qla2x00_fabric_login(vha, fcport, next_loopid); if (rval == QLA_SUCCESS) { - /* Send an ADISC to tape devices.*/ + /* Send an ADISC to FCP2 devices.*/ opts = 0; - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) opts |= BIT_1; rval = qla2x00_get_port_database(vha, fcport, opts); if (rval != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 209f50e..8529eb1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1188,7 +1188,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev) scsi_qla_host_t *vha = shost_priv(sdev->host); struct qla_hw_data *ha = vha->hw; struct fc_rport *rport = starget_to_rport(sdev->sdev_target); - fc_port_t *fcport = *(fc_port_t **)rport->dd_data; struct req_que *req = vha->req; if (sdev->tagged_supported) @@ -1197,8 +1196,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev) scsi_deactivate_tcq(sdev, req->max_q_depth); rport->dev_loss_tmo = ha->port_down_retry_count; - if (sdev->type == TYPE_TAPE) - fcport->flags |= FCF_TAPE_PRESENT; return 0; } @@ -2805,7 +2802,7 @@ void qla2x00_relogin(struct scsi_qla_host *vha) fcport->login_retry--; if (fcport->flags & FCF_FABRIC_DEVICE) { - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) ha->isp_ops->fabric_logout(vha, fcport->loop_id, fcport->d_id.b.domain, @@ -3141,7 +3138,10 @@ qla2x00_timer(scsi_qla_host_t *vha) if (!IS_QLA2100(ha) && vha->link_down_timeout) atomic_set(&vha->loop_state, LOOP_DEAD); - /* Schedule an ISP abort to return any tape commands. */ + /* + * Schedule an ISP abort to return any FCP2-device + * commands. + */ /* NPIV - scan physical port only */ if (!vha->vp_idx) { spin_lock_irqsave(&ha->hardware_lock, @@ -3158,7 +3158,7 @@ qla2x00_timer(scsi_qla_host_t *vha) if (sp->ctx) continue; sfcp = sp->fcport; - if (!(sfcp->flags & FCF_TAPE_PRESENT)) + if (!(sfcp->flags & FCF_FCP2_DEVICE)) continue; set_bit(ISP_ABORT_NEEDED, -- cgit v0.10.2 From 368bbe077739fa1ef6fc0195b2810ed50ef87df6 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 12 Jan 2010 12:59:49 -0800 Subject: [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 010e69b..371dc89 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -2292,11 +2292,14 @@ qla25xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, uint32_t faddr, left, burst; struct qla_hw_data *ha = vha->hw; + if (IS_QLA25XX(ha) || IS_QLA81XX(ha)) + goto try_fast; if (offset & 0xfff) goto slow_read; if (length < OPTROM_BURST_SIZE) goto slow_read; +try_fast: optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, &optrom_dma, GFP_KERNEL); if (!optrom) { -- cgit v0.10.2 From eda05a28ec52be40086400a1b606d211276f0e41 Mon Sep 17 00:00:00 2001 From: Harish Zunjarrao Date: Tue, 12 Jan 2010 12:59:50 -0800 Subject: [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. The 32bit kernel does not add padding bytes in the fc_bsg_request structure whereas the 64bit kernel adds padding bytes in the fc_bsg_request structure. Due to this, structure elements gets mismatched with 32bit application and 64bit kernel.To resolve this, used packed modifier to avoid adding padding bytes. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h index a4b2333..91a4e4f 100644 --- a/include/scsi/scsi_bsg_fc.h +++ b/include/scsi/scsi_bsg_fc.h @@ -292,7 +292,7 @@ struct fc_bsg_request { struct fc_bsg_rport_els r_els; struct fc_bsg_rport_ct r_ct; } rqst_data; -}; +} __attribute__((packed)); /* response (request sense data) structure of the sg_io_v4 */ -- cgit v0.10.2 From 22c24734ce5e7cee9a63e02e5aa7ed108f8fad4d Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Tue, 12 Jan 2010 12:59:51 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.01-k10. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index a65dd95..ed36279 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k9" +#define QLA2XXX_VERSION "8.03.01-k10" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v0.10.2 From f09d5454576b9aabd4ce454937cd86263428090b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 13 Jan 2010 17:52:36 +0100 Subject: [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request The patch "zfcp: Simplify handling of ct and els requests" accidentally removed the call to zfcp_fc_wka_port_put for FC CT BSG requests, thus not issuing a "close" request for the WKA ports. Introduce a CT specific handler to first call zfcp_fc_wka_port_put and then continue with the generic handler when returning from FC CT BSG requests. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index ac5e3b7..81d4375 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -677,6 +677,44 @@ static void zfcp_fc_ct_els_job_handler(void *data) job->job_done(job); } +static struct zfcp_fc_wka_port *zfcp_fc_job_wka_port(struct fc_bsg_job *job) +{ + u32 preamble_word1; + u8 gs_type; + struct zfcp_adapter *adapter; + + preamble_word1 = job->request->rqst_data.r_ct.preamble_word1; + gs_type = (preamble_word1 & 0xff000000) >> 24; + + adapter = (struct zfcp_adapter *) job->shost->hostdata[0]; + + switch (gs_type) { + case FC_FST_ALIAS: + return &adapter->gs->as; + case FC_FST_MGMT: + return &adapter->gs->ms; + case FC_FST_TIME: + return &adapter->gs->ts; + break; + case FC_FST_DIR: + return &adapter->gs->ds; + break; + default: + return NULL; + } +} + +static void zfcp_fc_ct_job_handler(void *data) +{ + struct fc_bsg_job *job = data; + struct zfcp_fc_wka_port *wka_port; + + wka_port = zfcp_fc_job_wka_port(job); + zfcp_fc_wka_port_put(wka_port); + + zfcp_fc_ct_els_job_handler(data); +} + static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, struct zfcp_adapter *adapter) { @@ -695,6 +733,7 @@ static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, } else d_id = ntoh24(job->request->rqst_data.h_els.port_id); + els->handler = zfcp_fc_ct_els_job_handler; return zfcp_fsf_send_els(adapter, d_id, els); } @@ -702,35 +741,18 @@ static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, struct zfcp_adapter *adapter) { int ret; - u8 gs_type; struct zfcp_fsf_ct_els *ct = job->dd_data; struct zfcp_fc_wka_port *wka_port; - u32 preamble_word1; - preamble_word1 = job->request->rqst_data.r_ct.preamble_word1; - gs_type = (preamble_word1 & 0xff000000) >> 24; - - switch (gs_type) { - case FC_FST_ALIAS: - wka_port = &adapter->gs->as; - break; - case FC_FST_MGMT: - wka_port = &adapter->gs->ms; - break; - case FC_FST_TIME: - wka_port = &adapter->gs->ts; - break; - case FC_FST_DIR: - wka_port = &adapter->gs->ds; - break; - default: - return -EINVAL; /* no such service */ - } + wka_port = zfcp_fc_job_wka_port(job); + if (!wka_port) + return -EINVAL; ret = zfcp_fc_wka_port_get(wka_port); if (ret) return ret; + ct->handler = zfcp_fc_ct_job_handler; ret = zfcp_fsf_send_ct(wka_port, ct, NULL); if (ret) zfcp_fc_wka_port_put(wka_port); @@ -752,7 +774,6 @@ int zfcp_fc_exec_bsg_job(struct fc_bsg_job *job) ct_els->req = job->request_payload.sg_list; ct_els->resp = job->reply_payload.sg_list; - ct_els->handler = zfcp_fc_ct_els_job_handler; ct_els->handler_data = job; switch (job->request->msgcode) { -- cgit v0.10.2 From 5a3fb3081a0166cdc5df0d9200234d09ad8d6083 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 13 Jan 2010 17:52:37 +0100 Subject: [SCSI] zfcp: Fix linebreak in hba trace Advance the correct pointer when inserting the linebreak for the HBA trace. It was missing in the output since the pointer to the output buffer was never advanced, and the linebreak character was overwritten later. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 8445095..7369c89 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -327,7 +327,7 @@ static void zfcp_dbf_hba_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); - p += sprintf(*p, "\n"); + *p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: -- cgit v0.10.2 From 9e2ab1fabdbd88669fdebd368fb5cda32ad5438d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 17:52:38 +0100 Subject: [SCSI] zfcp: add missing compat ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index f932400..0eb6eef 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -12,6 +12,7 @@ #include #include +#include #include #include "zfcp_def.h" #include "zfcp_ext.h" @@ -163,7 +164,7 @@ static void zfcp_cfdc_req_to_sense(struct zfcp_cfdc_data *data, } static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, - unsigned long buffer) + unsigned long arg) { struct zfcp_cfdc_data *data; struct zfcp_cfdc_data __user *data_user; @@ -175,7 +176,11 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, if (command != ZFCP_CFDC_IOC) return -ENOTTY; - data_user = (void __user *) buffer; + if (is_compat_task()) + data_user = compat_ptr(arg); + else + data_user = (void __user *)arg; + if (!data_user) return -EINVAL; -- cgit v0.10.2 From b8f08645f80a0c93246f3539ce53d3cae6a91fa0 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:00 +0100 Subject: [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout The hardware used with zfcp cannot abort a currently pending CT or ELS request. Therefore we need the option to postpone the timeout triggered request abort within the fc layer, since there is nothing zfcp can do to stop the request at this point. Cc: James Smart Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index ddfcecd..653f22a 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3527,7 +3527,10 @@ fc_bsg_job_timeout(struct request *req) if (!done && i->f->bsg_timeout) { /* call LLDD to abort the i/o as it has timed out */ err = i->f->bsg_timeout(job); - if (err) + if (err == -EAGAIN) { + job->ref_cnt--; + return BLK_EH_RESET_TIMER; + } else if (err) printk(KERN_ERR "ERROR: FC BSG request timeout - LLD " "abort failed with status %d\n", err); } -- cgit v0.10.2 From 491ca4426ba153f79e72d1ca2a30c926484282b7 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:01 +0100 Subject: [SCSI] zfcp: Introduce bsg_timeout callback. Introduce a zfcp callback for timeouts triggered from FC BSG. With zfcp, the underlying hardware cannot abort CT or ELS requests, so there is nothing to do when the block layer timeout expires. To avoid interference with the block layer timeout, simply indicate that the block layer timer should be reset. The timer running in the hardware for the pending CT or ELS request will return the request when it expires. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 03dec83..1406a65 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -108,6 +108,7 @@ extern void zfcp_fc_wka_ports_force_offline(struct zfcp_fc_wka_ports *); extern int zfcp_fc_gs_setup(struct zfcp_adapter *); extern void zfcp_fc_gs_destroy(struct zfcp_adapter *); extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *); +extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 81d4375..37a0ca2 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -788,6 +788,12 @@ int zfcp_fc_exec_bsg_job(struct fc_bsg_job *job) } } +int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *job) +{ + /* hardware tracks timeout, reset bsg timeout to not interfere */ + return -EAGAIN; +} + int zfcp_fc_gs_setup(struct zfcp_adapter *adapter) { struct zfcp_fc_wka_ports *wka_ports; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 771cc53..8e6fc68 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -652,6 +652,7 @@ struct fc_function_template zfcp_transport_functions = { .show_host_port_state = 1, .show_host_active_fc4s = 1, .bsg_request = zfcp_fc_exec_bsg_job, + .bsg_timeout = zfcp_fc_timeout_bsg_job, /* no functions registered for following dynamic attributes but directly set by LLDD */ .show_host_port_type = 1, -- cgit v0.10.2 From 51375ee8374dd7fa574e1a14ebac406c6d28543b Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:02 +0100 Subject: [SCSI] zfcp: Set hardware timeout as requested by BSG request. The hardware used with zfcp provides a timer for CT and ELS requests instead of an abort capability for these commands. To correctly handle the FC BSG timeouts, pass the timeout from the BSG requests to the hardware. Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 1406a65..66bdb34 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -130,9 +130,9 @@ extern void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *); extern int zfcp_fsf_status_read(struct zfcp_qdio *); extern int zfcp_status_read_refill(struct zfcp_adapter *adapter); extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *, - mempool_t *); + mempool_t *, unsigned int); extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32, - struct zfcp_fsf_ct_els *); + struct zfcp_fsf_ct_els *, unsigned int); extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *, struct scsi_cmnd *); extern void zfcp_fsf_req_free(struct zfcp_fsf_req *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 37a0ca2..0f7b493 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -258,7 +258,8 @@ static int zfcp_fc_ns_gid_pn_request(struct zfcp_port *port, gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn; ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct, - adapter->pool.gid_pn_req); + adapter->pool.gid_pn_req, + ZFCP_FC_CTELS_TMO); if (!ret) { wait_for_completion(&completion); zfcp_fc_ns_gid_pn_eval(gid_pn); @@ -421,7 +422,8 @@ static int zfcp_fc_adisc(struct zfcp_port *port) hton24(adisc->adisc_req.adisc_port_id, fc_host_port_id(adapter->scsi_host)); - ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els); + ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els, + ZFCP_FC_CTELS_TMO); if (ret) kmem_cache_free(zfcp_data.adisc_cache, adisc); @@ -532,7 +534,8 @@ static int zfcp_fc_send_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft, ct->req = &gpn_ft->sg_req; ct->resp = gpn_ft->sg_resp; - ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL); + ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL, + ZFCP_FC_CTELS_TMO); if (!ret) wait_for_completion(&completion); return ret; @@ -734,7 +737,7 @@ static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, d_id = ntoh24(job->request->rqst_data.h_els.port_id); els->handler = zfcp_fc_ct_els_job_handler; - return zfcp_fsf_send_els(adapter, d_id, els); + return zfcp_fsf_send_els(adapter, d_id, els, job->req->timeout / HZ); } static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, @@ -753,7 +756,7 @@ static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, return ret; ct->handler = zfcp_fc_ct_job_handler; - ret = zfcp_fsf_send_ct(wka_port, ct, NULL); + ret = zfcp_fsf_send_ct(wka_port, ct, NULL, job->req->timeout / HZ); if (ret) zfcp_fc_wka_port_put(wka_port); diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h index cb2a366..0747b08 100644 --- a/drivers/s390/scsi/zfcp_fc.h +++ b/drivers/s390/scsi/zfcp_fc.h @@ -27,6 +27,8 @@ #define ZFCP_FC_GPN_FT_MAX_ENT (ZFCP_FC_GPN_FT_NUM_BUFS * \ (ZFCP_FC_GPN_FT_ENT_PAGE + 1)) +#define ZFCP_FC_CTELS_TMO (2 * FC_DEF_R_A_TOV / 1000) + /** * struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request * @ct_hdr: FC GS common transport header diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 482dcd9..e8fb4d9 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1068,20 +1068,20 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req, static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, struct scatterlist *sg_req, struct scatterlist *sg_resp, - int max_sbals) + int max_sbals, unsigned int timeout) { int ret; - unsigned int fcp_chan_timeout; ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals); if (ret) return ret; /* common settings for ct/gs and els requests */ - fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000; + if (timeout > 255) + timeout = 255; /* max value accepted by hardware */ req->qtcb->bottom.support.service_class = FSF_CLASS_3; - req->qtcb->bottom.support.timeout = fcp_chan_timeout; - zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ); + req->qtcb->bottom.support.timeout = timeout; + zfcp_fsf_start_timer(req, (timeout + 10) * HZ); return 0; } @@ -1092,7 +1092,8 @@ static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, * @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req */ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, - struct zfcp_fsf_ct_els *ct, mempool_t *pool) + struct zfcp_fsf_ct_els *ct, mempool_t *pool, + unsigned int timeout) { struct zfcp_qdio *qdio = wka_port->adapter->qdio; struct zfcp_fsf_req *req; @@ -1111,7 +1112,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp, - FSF_MAX_SBALS_PER_REQ); + FSF_MAX_SBALS_PER_REQ, timeout); if (ret) goto failed_send; @@ -1188,7 +1189,7 @@ skip_fsfstatus: * @els: pointer to struct zfcp_send_els with data for the command */ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, - struct zfcp_fsf_ct_els *els) + struct zfcp_fsf_ct_els *els, unsigned int timeout) { struct zfcp_fsf_req *req; struct zfcp_qdio *qdio = adapter->qdio; @@ -1206,7 +1207,7 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2); + ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2, timeout); if (ret) goto failed_send; -- cgit v0.10.2 From 534ef056db8a8fb6b9d50188d88ed5d1fbc66673 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 15 Jan 2010 13:07:34 +0100 Subject: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree When removing several devices aic79xx will occasionally Oops in ahd_handle_nonpkt_busfree during rescan. Looking at the code I found that we're indeed not checking if the scb in question is NULL. So check for it before accessing it. Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 4d419c1..78971db 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -3171,13 +3171,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) tinfo->curr.transport_version = 2; tinfo->goal.transport_version = 2; tinfo->goal.ppr_options = 0; - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so - * that command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting + * for selection queue that may + * also be for this target so that + * command ordering is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) @@ -3194,13 +3197,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) MSG_EXT_WDTR_BUS_8_BIT, AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so that - * command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting for + * selection queue that may also be for + * this target so that command ordering + * is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) && ppr_busfree == 0) { @@ -3217,13 +3223,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so that - * command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting for + * selection queue that may also be for + * this target so that command ordering + * is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 && ahd_sent_msg(ahd, AHDMSG_1B, @@ -3251,7 +3260,7 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) * the message phases. We check it last in case we * had to send some other message that caused a busfree. */ - if (printerror != 0 + if (scb != NULL && printerror != 0 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { -- cgit v0.10.2 From ec51b7f538c440bfa5a4d538133c659071c02155 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 19 Jan 2010 00:27:58 -0800 Subject: Input: ad7879 - support auxiliary GPIOs via gpiolib Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index c21e6d3..794d070 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -132,7 +133,9 @@ struct ad7879 { struct input_dev *input; struct work_struct work; struct timer_list timer; - +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; +#endif struct mutex mutex; unsigned disabled:1; /* P: mutex */ @@ -150,11 +153,9 @@ struct ad7879 { u8 median; u16 x_plate_ohms; u16 pressure_max; - u16 gpio_init; u16 cmd_crtl1; u16 cmd_crtl2; u16 cmd_crtl3; - unsigned gpio:1; }; static int ad7879_read(bus_device *, u8); @@ -237,24 +238,6 @@ static irqreturn_t ad7879_irq(int irq, void *handle) static void ad7879_setup(struct ad7879 *ts) { - ts->cmd_crtl3 = AD7879_YPLUS_BIT | - AD7879_XPLUS_BIT | - AD7879_Z2_BIT | - AD7879_Z1_BIT | - AD7879_TEMPMASK_BIT | - AD7879_AUXVBATMASK_BIT | - AD7879_GPIOALERTMASK_BIT; - - ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | - AD7879_AVG(ts->averaging) | - AD7879_MFS(ts->median) | - AD7879_FCD(ts->first_conversion_delay) | - ts->gpio_init; - - ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | - AD7879_ACQ(ts->acquisition_time) | - AD7879_TMR(ts->pen_down_acc_interval); - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); @@ -324,48 +307,132 @@ static ssize_t ad7879_disable_store(struct device *dev, static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); -static ssize_t ad7879_gpio_show(struct device *dev, - struct device_attribute *attr, char *buf) +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +#ifdef CONFIG_GPIOLIB +static int ad7879_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) { - struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - return sprintf(buf, "%u\n", ts->gpio); + mutex_lock(&ts->mutex); + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; } -static ssize_t ad7879_gpio_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ad7879_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) { - struct ad7879 *ts = dev_get_drvdata(dev); - unsigned long val; - int error; + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - error = strict_strtoul(buf, 10, &val); - if (error) - return error; + mutex_lock(&ts->mutex); + ts->cmd_crtl2 &= ~AD7879_GPIODIR; + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; + if (level) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + u16 val; mutex_lock(&ts->mutex); - ts->gpio = !!val; - error = ad7879_write(ts->bus, AD7879_REG_CTRL2, - ts->gpio ? - ts->cmd_crtl2 & ~AD7879_GPIO_DATA : - ts->cmd_crtl2 | AD7879_GPIO_DATA); + val = ad7879_read(ts->bus, AD7879_REG_CTRL2); mutex_unlock(&ts->mutex); - return error ? : count; + return !!(val & AD7879_GPIO_DATA); } -static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); +static void ad7879_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); -static struct attribute *ad7879_attributes[] = { - &dev_attr_disable.attr, - &dev_attr_gpio.attr, - NULL -}; + mutex_lock(&ts->mutex); + if (value) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; -static const struct attribute_group ad7879_attr_group = { - .attrs = ad7879_attributes, -}; + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); +} + +static int __devinit ad7879_gpio_add(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret = 0; + + if (pdata->gpio_export) { + ts->gc.direction_input = ad7879_gpio_direction_input; + ts->gc.direction_output = ad7879_gpio_direction_output; + ts->gc.get = ad7879_gpio_get_value; + ts->gc.set = ad7879_gpio_set_value; + ts->gc.can_sleep = 1; + ts->gc.base = pdata->gpio_base; + ts->gc.ngpio = 1; + ts->gc.label = "AD7879-GPIO"; + ts->gc.owner = THIS_MODULE; + ts->gc.dev = dev; + + ret = gpiochip_add(&ts->gc); + if (ret) + dev_err(dev, "failed to register gpio %d\n", + ts->gc.base); + } + + return ret; +} + +/* + * We mark ad7879_gpio_remove inline so there is a chance the code + * gets discarded when not needed. We can't do __devinit/__devexit + * markup since it is used in both probe and remove methods. + */ +static inline void ad7879_gpio_remove(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret; + + if (pdata->gpio_export) { + ret = gpiochip_remove(&ts->gc); + if (ret) + dev_err(dev, "failed to remove gpio %d\n", + ts->gc.base); + } +} +#else +static inline int ad7879_gpio_add(struct device *dev) +{ + return 0; +} + +static inline void ad7879_gpio_remove(struct device *dev) +{ +} +#endif static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) { @@ -403,12 +470,6 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - if (pdata->gpio_output) - ts->gpio_init = AD7879_GPIO_EN | - (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); - else - ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); input_dev->name = "AD7879 Touchscreen"; @@ -446,6 +507,23 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) goto err_free_mem; } + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay); + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, @@ -460,15 +538,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_free_irq; - err = input_register_device(input_dev); + err = ad7879_gpio_add(&bus->dev); if (err) goto err_remove_attr; + err = input_register_device(input_dev); + if (err) + goto err_remove_gpio; + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", revid >> 8, bus->irq); return 0; +err_remove_gpio: + ad7879_gpio_remove(&bus->dev); err_remove_attr: sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); err_free_irq: @@ -481,6 +565,7 @@ err_free_mem: static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) { + ad7879_gpio_remove(&bus->dev); ad7879_disable(ts); sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); free_irq(ts->bus->irq, ts); diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 4231104..6334cee 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -28,8 +28,12 @@ struct ad7879_platform_data { * 1 = 4, 2 = 8, 3 = 16 (median > averaging) */ u8 median; - /* 1 = AUX/VBAT/GPIO set to GPIO Output */ - u8 gpio_output; - /* Initial GPIO pin state (valid if gpio_output = 1) */ - u8 gpio_default; + /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib + * requires CONFIG_GPIOLIB + */ + bool gpio_export; + /* identifies the first GPIO number handled by this chip; + * or, if negative, requests dynamic ID allocation. + */ + s32 gpio_base; }; -- cgit v0.10.2 From 135d01899b1fba17045961febff7e5141db6048f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 19 Jan 2010 19:06:59 +0100 Subject: netfilter: nf_conntrack_sip: fix off-by-one in compact header parsing In a string like "v:SIP/2.0..." it was checking for !isalpha('S') when it meant to be inspecting the ':'. Patch by Greg Alexander Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 4b57216..023966b 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -376,7 +376,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, dptr += hdr->len; else if (hdr->cname && limit - dptr >= hdr->clen + 1 && strnicmp(dptr, hdr->cname, hdr->clen) == 0 && - !isalpha(*(dptr + hdr->clen + 1))) + !isalpha(*(dptr + hdr->clen))) dptr += hdr->clen; else continue; -- cgit v0.10.2 From 74401773f80b6d42f7a4c6994ca0cca883b03745 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 19 Jan 2010 20:51:32 +0100 Subject: ath9k: fix beacon slot/buffer leak When cleaning up beacon buffers and slots, ath9k currently checks if sc->ah->opmode is set to a beacon related mode before cleaning up buffers. An unfortunate ordering of interface up/down commands can lead to sc->ah->opmode being set to monitor mode, while there are AP interfaces present on the same wiphy. Always cleaning up beacon buffers if present fixes this issue. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 996eb90..643bea3 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - ath_beacon_return(sc, avp); ath9k_ps_restore(sc); } + ath_beacon_return(sc, avp); sc->sc_flags &= ~SC_OP_BEACONS; for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { -- cgit v0.10.2 From 71318da9d2a46b9986dcecb44b7ae978753ca4dd Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 21 Jan 2010 12:12:52 +0300 Subject: ARM: MX3: Fixed typo in declared enum type name. To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy Acked-by: Daniel Mack Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 0184b63..2b2da03 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -25,7 +25,7 @@ #ifndef __ASSEMBLY__ -enum mx31lilly_boards { +enum mx31lite_boards { MX31LITE_NOBOARD = 0, MX31LITE_DB = 1, }; -- cgit v0.10.2 From fabf318e5e4bda0aca2b0d617b191884fda62703 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 21 Jan 2010 21:04:57 +0100 Subject: sched: Fix fork vs hotplug vs cpuset namespaces There are a number of issues: 1) TASK_WAKING vs cgroup_clone (cpusets) copy_process(): sched_fork() child->state = TASK_WAKING; /* waiting for wake_up_new_task() */ if (current->nsproxy != p->nsproxy) ns_cgroup_clone() cgroup_clone() mutex_lock(inode->i_mutex) mutex_lock(cgroup_mutex) cgroup_attach_task() ss->can_attach() ss->attach() [ -> cpuset_attach() ] cpuset_attach_task() set_cpus_allowed_ptr(); while (child->state == TASK_WAKING) cpu_relax(); will deadlock the system. 2) cgroup_clone (cpusets) vs copy_process So even if the above would work we still have: copy_process(): if (current->nsproxy != p->nsproxy) ns_cgroup_clone() cgroup_clone() mutex_lock(inode->i_mutex) mutex_lock(cgroup_mutex) cgroup_attach_task() ss->can_attach() ss->attach() [ -> cpuset_attach() ] cpuset_attach_task() set_cpus_allowed_ptr(); ... p->cpus_allowed = current->cpus_allowed over-writing the modified cpus_allowed. 3) fork() vs hotplug if we unplug the child's cpu after the sanity check when the child gets attached to the task_list but before wake_up_new_task() shit will meet with fan. Solve all these issues by moving fork cpu selection into wake_up_new_task(). Reported-by: Serge E. Hallyn Tested-by: Serge E. Hallyn Signed-off-by: Peter Zijlstra LKML-Reference: <1264106190.4283.1314.camel@laptop> Signed-off-by: Thomas Gleixner diff --git a/kernel/fork.c b/kernel/fork.c index 5b2959b..f88bd98 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1241,21 +1241,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, /* Need tasklist lock for parent etc handling! */ write_lock_irq(&tasklist_lock); - /* - * The task hasn't been attached yet, so its cpus_allowed mask will - * not be changed, nor will its assigned CPU. - * - * The cpus_allowed mask of the parent may have changed after it was - * copied first time - so re-copy it here, then check the child's CPU - * to ensure it is on a valid CPU (and if not, just force it back to - * parent's CPU). This avoids alot of nasty races. - */ - p->cpus_allowed = current->cpus_allowed; - p->rt.nr_cpus_allowed = current->rt.nr_cpus_allowed; - if (unlikely(!cpu_isset(task_cpu(p), p->cpus_allowed) || - !cpu_online(task_cpu(p)))) - set_task_cpu(p, smp_processor_id()); - /* CLONE_PARENT re-uses the old parent */ if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) { p->real_parent = current->real_parent; diff --git a/kernel/sched.c b/kernel/sched.c index 4508fe7..3a8fb30 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2320,14 +2320,12 @@ static int select_fallback_rq(int cpu, struct task_struct *p) } /* - * Called from: + * Gets called from 3 sites (exec, fork, wakeup), since it is called without + * holding rq->lock we need to ensure ->cpus_allowed is stable, this is done + * by: * - * - fork, @p is stable because it isn't on the tasklist yet - * - * - exec, @p is unstable, retry loop - * - * - wake-up, we serialize ->cpus_allowed against TASK_WAKING so - * we should be good. + * exec: is unstable, retry loop + * fork & wake-up: serialize ->cpus_allowed against TASK_WAKING */ static inline int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags) @@ -2620,9 +2618,6 @@ void sched_fork(struct task_struct *p, int clone_flags) if (p->sched_class->task_fork) p->sched_class->task_fork(p); -#ifdef CONFIG_SMP - cpu = select_task_rq(p, SD_BALANCE_FORK, 0); -#endif set_task_cpu(p, cpu); #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) @@ -2652,6 +2647,21 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) { unsigned long flags; struct rq *rq; + int cpu = get_cpu(); + +#ifdef CONFIG_SMP + /* + * Fork balancing, do it here and not earlier because: + * - cpus_allowed can change in the fork path + * - any previously selected cpu might disappear through hotplug + * + * We still have TASK_WAKING but PF_STARTING is gone now, meaning + * ->cpus_allowed is stable, we have preemption disabled, meaning + * cpu_online_mask is stable. + */ + cpu = select_task_rq(p, SD_BALANCE_FORK, 0); + set_task_cpu(p, cpu); +#endif rq = task_rq_lock(p, &flags); BUG_ON(p->state != TASK_WAKING); @@ -2665,6 +2675,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_woken(rq, p); #endif task_rq_unlock(rq, &flags); + put_cpu(); } #ifdef CONFIG_PREEMPT_NOTIFIERS @@ -7139,14 +7150,18 @@ int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask) * the ->cpus_allowed mask from under waking tasks, which would be * possible when we change rq->lock in ttwu(), so synchronize against * TASK_WAKING to avoid that. + * + * Make an exception for freshly cloned tasks, since cpuset namespaces + * might move the task about, we have to validate the target in + * wake_up_new_task() anyway since the cpu might have gone away. */ again: - while (p->state == TASK_WAKING) + while (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) cpu_relax(); rq = task_rq_lock(p, &flags); - if (p->state == TASK_WAKING) { + if (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) { task_rq_unlock(rq, &flags); goto again; } -- cgit v0.10.2 From 98ec286e016a028678cc943b1a1f87668ad447c8 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Thu, 21 Jan 2010 19:33:14 +0100 Subject: drbd: fix max_segment_size initialization blk_queue_make_request() internally calls blk_set_default_limits(), so calling blk_queue_max_segment_size() before is useless. Ergo: move the call to blk_queue_max_segment_size() down a few lines. Impact: If, after a fresh modprobe, you first connect a Diskless drbd, then attach, this could result in a DRBD Protocol Error at first. The next connection attempt would then succeeded. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index e898ad9..ab871e0 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -2973,7 +2973,6 @@ struct drbd_conf *drbd_new_device(unsigned int minor) goto out_no_q; mdev->rq_queue = q; q->queuedata = mdev; - blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE); disk = alloc_disk(1); if (!disk) @@ -2997,6 +2996,7 @@ struct drbd_conf *drbd_new_device(unsigned int minor) q->backing_dev_info.congested_data = mdev; blk_queue_make_request(q, drbd_make_request_26); + blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE); blk_queue_bounce_limit(q, BLK_BOUNCE_ANY); blk_queue_merge_bvec(q, drbd_merge_bvec); q->queue_lock = &mdev->req_lock; /* needed since we use */ -- cgit v0.10.2 From d91afd15b041f27d34859c79afa9e172018a86f4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 16:40:20 +0100 Subject: x86/amd-iommu: Fix possible integer overflow The variable i in this function could be increased to over 2**32 which would result in an integer overflow when using int. Fix it by changing i to unsigned long. Cc: stable@kernel.org Signed-off-by: Joerg Roedel diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 23824fe..c2ccbd7 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -980,7 +980,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom, { int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT; struct amd_iommu *iommu; - int i; + unsigned long i; #ifdef CONFIG_IOMMU_STRESS populate = false; -- cgit v0.10.2 From 2ca762790caf822f7b61430fbaffa3ae4219977f Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 16:45:31 +0100 Subject: x86/amd-iommu: Fix NULL pointer dereference in __detach_device() In the __detach_device function the reference count for a device-domain binding may become zero. This results in the device being removed from the domain and dev_data->domain will be NULL. This is bad because this pointer is dereferenced when trying to unlock the domain->lock. This patch fixes the issue by keeping the domain in a seperate variable. Signed-off-by: Joerg Roedel diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index c2ccbd7..4478a48 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1489,11 +1489,14 @@ static void __detach_device(struct device *dev) { struct iommu_dev_data *dev_data = get_dev_data(dev); struct iommu_dev_data *alias_data; + struct protection_domain *domain; unsigned long flags; BUG_ON(!dev_data->domain); - spin_lock_irqsave(&dev_data->domain->lock, flags); + domain = dev_data->domain; + + spin_lock_irqsave(&domain->lock, flags); if (dev_data->alias != dev) { alias_data = get_dev_data(dev_data->alias); @@ -1504,7 +1507,7 @@ static void __detach_device(struct device *dev) if (atomic_dec_and_test(&dev_data->bind)) do_detach(dev); - spin_unlock_irqrestore(&dev_data->domain->lock, flags); + spin_unlock_irqrestore(&domain->lock, flags); /* * If we run in passthrough mode the device must be assigned to the -- cgit v0.10.2 From f5325094379158e6b876ea0010c807bf7890ec8f Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 17:44:35 +0100 Subject: x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt This patch moves the initialization of the iommu-api out of the dma-ops initialization code. This ensures that the iommu-api is initialized even with iommu=pt. Cc: stable@kernel.org Signed-off-by: Joerg Roedel diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index 4d817f9..d2544f1 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -31,6 +31,7 @@ extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu); extern int amd_iommu_init_devices(void); extern void amd_iommu_uninit_devices(void); extern void amd_iommu_init_notifier(void); +extern void amd_iommu_init_api(void); #ifndef CONFIG_AMD_IOMMU_STATS static inline void amd_iommu_stats_init(void) { } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 4478a48..751ce73 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -2221,6 +2221,12 @@ static struct dma_map_ops amd_iommu_dma_ops = { /* * The function which clues the AMD IOMMU driver into dma_ops. */ + +void __init amd_iommu_init_api(void) +{ + register_iommu(&amd_iommu_ops); +} + int __init amd_iommu_init_dma_ops(void) { struct amd_iommu *iommu; @@ -2256,8 +2262,6 @@ int __init amd_iommu_init_dma_ops(void) /* Make the driver finally visible to the drivers */ dma_ops = &amd_iommu_dma_ops; - register_iommu(&amd_iommu_ops); - amd_iommu_stats_init(); return 0; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index fb490ce..9dc91b4 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1292,9 +1292,12 @@ static int __init amd_iommu_init(void) ret = amd_iommu_init_passthrough(); else ret = amd_iommu_init_dma_ops(); + if (ret) goto free; + amd_iommu_init_api(); + amd_iommu_init_notifier(); enable_iommus(); -- cgit v0.10.2 From d3ad9373b7c29b63d5e8460a69453718d200cc3b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 17:55:27 +0100 Subject: x86/amd-iommu: Fix deassignment of a device from the pt_domain Deassigning a device from the passthrough domain does not work and breaks device assignment to kvm guests. This patch fixes the issue. Cc: stable@kernel.org Signed-off-by: Joerg Roedel diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 751ce73..adb0ba0 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1511,9 +1511,11 @@ static void __detach_device(struct device *dev) /* * If we run in passthrough mode the device must be assigned to the - * passthrough domain if it is detached from any other domain + * passthrough domain if it is detached from any other domain. + * Make sure we can deassign from the pt_domain itself. */ - if (iommu_pass_through && dev_data->domain == NULL) + if (iommu_pass_through && + (dev_data->domain == NULL && domain != pt_domain)) __attach_device(dev, pt_domain); } -- cgit v0.10.2 From aeb583d08172e038552bdefe0a79a9aa9e2ecd7c Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Mon, 18 Jan 2010 18:57:33 -0500 Subject: lib/dma-debug.c: mark file-local struct symbol static. warning: symbol 'filter_fops' was not declared. Should it be static? Signed-off-by: Thiago Farina Signed-off-by: Joerg Roedel diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 7399744..e039958 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -587,7 +587,7 @@ out_unlock: return count; } -const struct file_operations filter_fops = { +static const struct file_operations filter_fops = { .read = filter_read, .write = filter_write, }; -- cgit v0.10.2 From 0406ad336c066190770cbf350b552d608e43ed09 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 20 Jan 2010 00:06:30 -0700 Subject: ACPI: processor: add kernel command line support for early _PDC eval Allow platforms not listed in DMI table to opt-in and evaluate _PDC early. Signed-off-by: Alex Chiang Signed-off-by: Len Brown diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 736d456..826b6e1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file acpi_display_output=video See above. + acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods + early. Needed on some platforms to properly + initialize the EC. + acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs default in APIC mode diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 7247819..3bbafe9 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -151,6 +151,13 @@ static int set_early_pdc_optin(const struct dmi_system_id *id) return 0; } +static int param_early_pdc_optin(char *s) +{ + early_pdc_optin = 1; + return 1; +} +__setup("acpi_early_pdc_eval", param_early_pdc_optin); + static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = { { set_early_pdc_optin, "HP Envy", { -- cgit v0.10.2 From a4932299d03a1c20e58e4cc40a66fb0a048fb3a7 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 20 Jan 2010 00:06:35 -0700 Subject: ACPI: processor: only evaluate _PDC once per processor If we evaluate _PDC in the early path, we do not want to evaluate it again when the processor driver is loaded. Cc: Venkatesh Pallipadi Signed-off-by: Alex Chiang Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 3bbafe9..e306ba9 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -125,6 +125,8 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in) return status; } +static int early_pdc_done; + void acpi_processor_set_pdc(acpi_handle handle) { struct acpi_object_list *obj_list; @@ -132,6 +134,9 @@ void acpi_processor_set_pdc(acpi_handle handle) if (arch_has_acpi_pdc() == false) return; + if (early_pdc_done) + return; + obj_list = acpi_processor_alloc_pdc(); if (!obj_list) return; @@ -199,4 +204,6 @@ void __init acpi_early_processor_set_pdc(void) acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); + + early_pdc_done = 1; } -- cgit v0.10.2 From 3a5fc0e40cb467e692737bc798bc99773c81e1e2 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 20 Jan 2010 12:10:47 -0800 Subject: x86: Set hotpluggable nodes in nodes_possible_map nodes_possible_map does not currently include nodes that have SRAT entries that are all ACPI_SRAT_MEM_HOT_PLUGGABLE since the bit is cleared in nodes_parsed if it does not have an online address range. Unequivocally setting the bit in nodes_parsed is insufficient since existing code, such as acpi_get_nodes(), assumes all nodes in the map have online address ranges. In fact, all code using nodes_parsed assumes such nodes represent an address range of online memory. nodes_possible_map is created by unioning nodes_parsed and cpu_nodes_parsed; the former represents nodes with online memory and the latter represents memoryless nodes. We now set the bit for hotpluggable nodes in cpu_nodes_parsed so that it also gets set in nodes_possible_map. [ hpa: Haicheng Li points out that this makes the naming of the variable cpu_nodes_parsed somewhat counterintuitive. However, leave it as is in the interest of keeping the pure bug fix patch small. ] Signed-off-by: David Rientjes Tested-by: Haicheng Li LKML-Reference: Cc: Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index a271241..28c6876 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -229,9 +229,11 @@ update_nodes_add(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); } - if (changed) + if (changed) { + node_set(node, cpu_nodes_parsed); printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); + } } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -- cgit v0.10.2 From 73472a46b5b28116b145fb5fc05242c1aa8e1461 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 21 Jan 2010 11:09:52 -0800 Subject: x86: Disable HPET MSI on ATI SB700/SB800 HPET MSI on platforms with ATI SB700/SB800 as they seem to have some side-effects on floppy DMA. Do not use HPET MSI on such platforms. Original problem report from Mark Hounschell http://lkml.indiana.edu/hypermail/linux/kernel/0912.2/01118.html [ This patch needs to go to stable as well. But, there are some conflicts that prevents the patch from going as is. I can rebase/resubmit to stable once the patch goes upstream. hpa: still Cc:'ing stable@ as an FYI. ] Tested-by: Mark Hounschell Signed-off-by: Venkatesh Pallipadi Cc: LKML-Reference: <20100121190952.GA32523@linux-os.sc.intel.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 5d89fd2..1d5c08a 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -67,6 +67,7 @@ extern unsigned long hpet_address; extern unsigned long force_hpet_address; extern u8 hpet_blockid; extern int hpet_force_user; +extern u8 hpet_msi_disable; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ba6e658..ad80a1c 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -34,6 +34,8 @@ */ unsigned long hpet_address; u8 hpet_blockid; /* OS timer block num */ +u8 hpet_msi_disable; + #ifdef CONFIG_PCI_MSI static unsigned long hpet_num_timers; #endif @@ -596,6 +598,9 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) unsigned int num_timers_used = 0; int i; + if (hpet_msi_disable) + return; + if (boot_cpu_has(X86_FEATURE_ARAT)) return; id = hpet_readl(HPET_ID); @@ -928,6 +933,9 @@ static __init int hpet_late_init(void) hpet_reserve_platform_timers(hpet_readl(HPET_ID)); hpet_print_config(); + if (hpet_msi_disable) + return 0; + if (boot_cpu_has(X86_FEATURE_ARAT)) return 0; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 18093d7..12e9fea 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -491,6 +491,19 @@ void force_hpet_resume(void) break; } } + +/* + * HPET MSI on some boards (ATI SB700/SB800) has side effect on + * floppy DMA. Disable HPET MSI on such platforms. + */ +static void force_disable_hpet_msi(struct pci_dev *unused) +{ + hpet_msi_disable = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, + force_disable_hpet_msi); + #endif #if defined(CONFIG_PCI) && defined(CONFIG_NUMA) -- cgit v0.10.2 From 3b2e3d85aeb80769fb96c15ee4f6e14135328471 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 22 Jan 2010 21:34:56 +0100 Subject: Revert "x86: ucode-amd: Load ucode-patches once ..." Commit d1c84f79a6ba992dc01e312c44a21496303874d6 leads to a regression when microcode_amd.c is compiled into the kernel. It causes a big boot delay because the firmware is not available. See http://marc.info/?l=linux-kernel&m=126267290920060 It also renders the reload sysfs attribute useless. Fixing this is too intrusive for an -rc5 kernel. Thus I'd like to restore the microcode loading behaviour of kernel 2.6.32. CC: Gene Heskett Signed-off-by: Andreas Herrmann LKML-Reference: <20100122203456.GB13792@alberich.amd.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index c24ca9a..ef51b50 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -12,8 +12,6 @@ struct device; enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND }; struct microcode_ops { - void (*init)(struct device *device); - void (*fini)(void); enum ucode_state (*request_microcode_user) (int cpu, const void __user *buf, size_t size); diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 37542b67..e1af7c0 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -36,9 +36,6 @@ MODULE_LICENSE("GPL v2"); #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000 #define UCODE_UCODE_TYPE 0x00000001 -const struct firmware *firmware; -static int supported_cpu; - struct equiv_cpu_entry { u32 installed_cpu; u32 fixed_errata_mask; @@ -77,12 +74,15 @@ static struct equiv_cpu_entry *equiv_cpu_table; static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { + struct cpuinfo_x86 *c = &cpu_data(cpu); u32 dummy; - if (!supported_cpu) - return -1; - memset(csig, 0, sizeof(*csig)); + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("microcode: CPU%d: AMD CPU family 0x%x not " + "supported\n", cpu, c->x86); + return -1; + } rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); return 0; @@ -294,10 +294,14 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) static enum ucode_state request_microcode_fw(int cpu, struct device *device) { + const char *fw_name = "amd-ucode/microcode_amd.bin"; + const struct firmware *firmware; enum ucode_state ret; - if (firmware == NULL) + if (request_firmware(&firmware, fw_name, device)) { + printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); return UCODE_NFOUND; + } if (*(u32 *)firmware->data != UCODE_MAGIC) { pr_err("invalid UCODE_MAGIC (0x%08x)\n", @@ -307,6 +311,8 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) ret = generic_load_microcode(cpu, firmware->data, firmware->size); + release_firmware(firmware); + return ret; } @@ -325,31 +331,7 @@ static void microcode_fini_cpu_amd(int cpu) uci->mc = NULL; } -void init_microcode_amd(struct device *device) -{ - const char *fw_name = "amd-ucode/microcode_amd.bin"; - struct cpuinfo_x86 *c = &boot_cpu_data; - - WARN_ON(c->x86_vendor != X86_VENDOR_AMD); - - if (c->x86 < 0x10) { - pr_warning("AMD CPU family 0x%x not supported\n", c->x86); - return; - } - supported_cpu = 1; - - if (request_firmware(&firmware, fw_name, device)) - pr_err("failed to load file %s\n", fw_name); -} - -void fini_microcode_amd(void) -{ - release_firmware(firmware); -} - static struct microcode_ops microcode_amd_ops = { - .init = init_microcode_amd, - .fini = fini_microcode_amd, .request_microcode_user = request_microcode_user, .request_microcode_fw = request_microcode_fw, .collect_cpu_info = collect_cpu_info_amd, diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 0c86324..cceb5bc 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -521,9 +521,6 @@ static int __init microcode_init(void) return PTR_ERR(microcode_pdev); } - if (microcode_ops->init) - microcode_ops->init(µcode_pdev->dev); - get_online_cpus(); mutex_lock(µcode_mutex); @@ -566,9 +563,6 @@ static void __exit microcode_exit(void) platform_device_unregister(microcode_pdev); - if (microcode_ops->fini) - microcode_ops->fini(); - microcode_ops = NULL; pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); -- cgit v0.10.2 From b160091802d4a76dd063facb09fcf10bf5d5d747 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sat, 23 Jan 2010 18:27:47 -0800 Subject: x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_X86_CPU_DEBUG, which provides some parsed versions of the x86 CPU configuration via debugfs, has caused boot failures on real hardware. The value of this feature has been marginal at best, as all this information is already available to userspace via generic interfaces. Causes crashes that have not been fixed + minimal utility -> remove. See the referenced LKML thread for more information. Reported-by: Ozan Çağlayan Signed-off-by: H. Peter Anvin LKML-Reference: Cc: Jaswinder Singh Rajput Cc: Linus Torvalds Cc: Rafael J. Wysocki Cc: Yinghai Lu Cc: diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbcbfde..eb40925 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -989,12 +989,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -config X86_CPU_DEBUG - tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" - ---help--- - If you select this option, this will provide various x86 CPUs - information through debugfs. - choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h deleted file mode 100644 index d96c1ee..0000000 --- a/arch/x86/include/asm/cpu_debug.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _ASM_X86_CPU_DEBUG_H -#define _ASM_X86_CPU_DEBUG_H - -/* - * CPU x86 architecture debug - * - * Copyright(C) 2009 Jaswinder Singh Rajput - */ - -/* Register flags */ -enum cpu_debug_bit { -/* Model Specific Registers (MSRs) */ - CPU_MC_BIT, /* Machine Check */ - CPU_MONITOR_BIT, /* Monitor */ - CPU_TIME_BIT, /* Time */ - CPU_PMC_BIT, /* Performance Monitor */ - CPU_PLATFORM_BIT, /* Platform */ - CPU_APIC_BIT, /* APIC */ - CPU_POWERON_BIT, /* Power-on */ - CPU_CONTROL_BIT, /* Control */ - CPU_FEATURES_BIT, /* Features control */ - CPU_LBRANCH_BIT, /* Last Branch */ - CPU_BIOS_BIT, /* BIOS */ - CPU_FREQ_BIT, /* Frequency */ - CPU_MTTR_BIT, /* MTRR */ - CPU_PERF_BIT, /* Performance */ - CPU_CACHE_BIT, /* Cache */ - CPU_SYSENTER_BIT, /* Sysenter */ - CPU_THERM_BIT, /* Thermal */ - CPU_MISC_BIT, /* Miscellaneous */ - CPU_DEBUG_BIT, /* Debug */ - CPU_PAT_BIT, /* PAT */ - CPU_VMX_BIT, /* VMX */ - CPU_CALL_BIT, /* System Call */ - CPU_BASE_BIT, /* BASE Address */ - CPU_VER_BIT, /* Version ID */ - CPU_CONF_BIT, /* Configuration */ - CPU_SMM_BIT, /* System mgmt mode */ - CPU_SVM_BIT, /*Secure Virtual Machine*/ - CPU_OSVM_BIT, /* OS-Visible Workaround*/ -/* Standard Registers */ - CPU_TSS_BIT, /* Task Stack Segment */ - CPU_CR_BIT, /* Control Registers */ - CPU_DT_BIT, /* Descriptor Table */ -/* End of Registers flags */ - CPU_REG_ALL_BIT, /* Select all Registers */ -}; - -#define CPU_REG_ALL (~0) /* Select all Registers */ - -#define CPU_MC (1 << CPU_MC_BIT) -#define CPU_MONITOR (1 << CPU_MONITOR_BIT) -#define CPU_TIME (1 << CPU_TIME_BIT) -#define CPU_PMC (1 << CPU_PMC_BIT) -#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT) -#define CPU_APIC (1 << CPU_APIC_BIT) -#define CPU_POWERON (1 << CPU_POWERON_BIT) -#define CPU_CONTROL (1 << CPU_CONTROL_BIT) -#define CPU_FEATURES (1 << CPU_FEATURES_BIT) -#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT) -#define CPU_BIOS (1 << CPU_BIOS_BIT) -#define CPU_FREQ (1 << CPU_FREQ_BIT) -#define CPU_MTRR (1 << CPU_MTTR_BIT) -#define CPU_PERF (1 << CPU_PERF_BIT) -#define CPU_CACHE (1 << CPU_CACHE_BIT) -#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT) -#define CPU_THERM (1 << CPU_THERM_BIT) -#define CPU_MISC (1 << CPU_MISC_BIT) -#define CPU_DEBUG (1 << CPU_DEBUG_BIT) -#define CPU_PAT (1 << CPU_PAT_BIT) -#define CPU_VMX (1 << CPU_VMX_BIT) -#define CPU_CALL (1 << CPU_CALL_BIT) -#define CPU_BASE (1 << CPU_BASE_BIT) -#define CPU_VER (1 << CPU_VER_BIT) -#define CPU_CONF (1 << CPU_CONF_BIT) -#define CPU_SMM (1 << CPU_SMM_BIT) -#define CPU_SVM (1 << CPU_SVM_BIT) -#define CPU_OSVM (1 << CPU_OSVM_BIT) -#define CPU_TSS (1 << CPU_TSS_BIT) -#define CPU_CR (1 << CPU_CR_BIT) -#define CPU_DT (1 << CPU_DT_BIT) - -/* Register file flags */ -enum cpu_file_bit { - CPU_INDEX_BIT, /* index */ - CPU_VALUE_BIT, /* value */ -}; - -#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT) - -#define MAX_CPU_FILES 512 - -struct cpu_private { - unsigned cpu; - unsigned type; - unsigned reg; - unsigned file; -}; - -struct cpu_debug_base { - char *name; /* Register name */ - unsigned flag; /* Register flag */ - unsigned write; /* Register write flag */ -}; - -/* - * Currently it looks similar to cpu_debug_base but once we add more files - * cpu_file_base will go in different direction - */ -struct cpu_file_base { - char *name; /* Register file name */ - unsigned flag; /* Register file flag */ - unsigned write; /* Register write flag */ -}; - -struct cpu_cpuX_base { - struct dentry *dentry; /* Register dentry */ - int init; /* Register index file */ -}; - -struct cpu_debug_range { - unsigned min; /* Register range min */ - unsigned max; /* Register range max */ - unsigned flag; /* Supported flags */ -}; - -#endif /* _ASM_X86_CPU_DEBUG_H */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 1d2cb38..c202b62 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -19,8 +19,6 @@ obj-y += vmware.o hypervisor.o sched.o obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o obj-$(CONFIG_X86_64) += bugs_64.o -obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o - obj-$(CONFIG_CPU_SUP_INTEL) += intel.o obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c deleted file mode 100644 index b368cd8..0000000 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * CPU x86 architecture debug code - * - * Copyright(C) 2009 Jaswinder Singh Rajput - * - * For licencing details see kernel-base/COPYING - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr); -static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr); -static DEFINE_PER_CPU(int, cpud_priv_count); - -static DEFINE_MUTEX(cpu_debug_lock); - -static struct dentry *cpu_debugfs_dir; - -static struct cpu_debug_base cpu_base[] = { - { "mc", CPU_MC, 0 }, - { "monitor", CPU_MONITOR, 0 }, - { "time", CPU_TIME, 0 }, - { "pmc", CPU_PMC, 1 }, - { "platform", CPU_PLATFORM, 0 }, - { "apic", CPU_APIC, 0 }, - { "poweron", CPU_POWERON, 0 }, - { "control", CPU_CONTROL, 0 }, - { "features", CPU_FEATURES, 0 }, - { "lastbranch", CPU_LBRANCH, 0 }, - { "bios", CPU_BIOS, 0 }, - { "freq", CPU_FREQ, 0 }, - { "mtrr", CPU_MTRR, 0 }, - { "perf", CPU_PERF, 0 }, - { "cache", CPU_CACHE, 0 }, - { "sysenter", CPU_SYSENTER, 0 }, - { "therm", CPU_THERM, 0 }, - { "misc", CPU_MISC, 0 }, - { "debug", CPU_DEBUG, 0 }, - { "pat", CPU_PAT, 0 }, - { "vmx", CPU_VMX, 0 }, - { "call", CPU_CALL, 0 }, - { "base", CPU_BASE, 0 }, - { "ver", CPU_VER, 0 }, - { "conf", CPU_CONF, 0 }, - { "smm", CPU_SMM, 0 }, - { "svm", CPU_SVM, 0 }, - { "osvm", CPU_OSVM, 0 }, - { "tss", CPU_TSS, 0 }, - { "cr", CPU_CR, 0 }, - { "dt", CPU_DT, 0 }, - { "registers", CPU_REG_ALL, 0 }, -}; - -static struct cpu_file_base cpu_file[] = { - { "index", CPU_REG_ALL, 0 }, - { "value", CPU_REG_ALL, 1 }, -}; - -/* CPU Registers Range */ -static struct cpu_debug_range cpu_reg_range[] = { - { 0x00000000, 0x00000001, CPU_MC, }, - { 0x00000006, 0x00000007, CPU_MONITOR, }, - { 0x00000010, 0x00000010, CPU_TIME, }, - { 0x00000011, 0x00000013, CPU_PMC, }, - { 0x00000017, 0x00000017, CPU_PLATFORM, }, - { 0x0000001B, 0x0000001B, CPU_APIC, }, - { 0x0000002A, 0x0000002B, CPU_POWERON, }, - { 0x0000002C, 0x0000002C, CPU_FREQ, }, - { 0x0000003A, 0x0000003A, CPU_CONTROL, }, - { 0x00000040, 0x00000047, CPU_LBRANCH, }, - { 0x00000060, 0x00000067, CPU_LBRANCH, }, - { 0x00000079, 0x00000079, CPU_BIOS, }, - { 0x00000088, 0x0000008A, CPU_CACHE, }, - { 0x0000008B, 0x0000008B, CPU_BIOS, }, - { 0x0000009B, 0x0000009B, CPU_MONITOR, }, - { 0x000000C1, 0x000000C4, CPU_PMC, }, - { 0x000000CD, 0x000000CD, CPU_FREQ, }, - { 0x000000E7, 0x000000E8, CPU_PERF, }, - { 0x000000FE, 0x000000FE, CPU_MTRR, }, - - { 0x00000116, 0x0000011E, CPU_CACHE, }, - { 0x00000174, 0x00000176, CPU_SYSENTER, }, - { 0x00000179, 0x0000017B, CPU_MC, }, - { 0x00000186, 0x00000189, CPU_PMC, }, - { 0x00000198, 0x00000199, CPU_PERF, }, - { 0x0000019A, 0x0000019A, CPU_TIME, }, - { 0x0000019B, 0x0000019D, CPU_THERM, }, - { 0x000001A0, 0x000001A0, CPU_MISC, }, - { 0x000001C9, 0x000001C9, CPU_LBRANCH, }, - { 0x000001D7, 0x000001D8, CPU_LBRANCH, }, - { 0x000001D9, 0x000001D9, CPU_DEBUG, }, - { 0x000001DA, 0x000001E0, CPU_LBRANCH, }, - - { 0x00000200, 0x0000020F, CPU_MTRR, }, - { 0x00000250, 0x00000250, CPU_MTRR, }, - { 0x00000258, 0x00000259, CPU_MTRR, }, - { 0x00000268, 0x0000026F, CPU_MTRR, }, - { 0x00000277, 0x00000277, CPU_PAT, }, - { 0x000002FF, 0x000002FF, CPU_MTRR, }, - - { 0x00000300, 0x00000311, CPU_PMC, }, - { 0x00000345, 0x00000345, CPU_PMC, }, - { 0x00000360, 0x00000371, CPU_PMC, }, - { 0x0000038D, 0x00000390, CPU_PMC, }, - { 0x000003A0, 0x000003BE, CPU_PMC, }, - { 0x000003C0, 0x000003CD, CPU_PMC, }, - { 0x000003E0, 0x000003E1, CPU_PMC, }, - { 0x000003F0, 0x000003F2, CPU_PMC, }, - - { 0x00000400, 0x00000417, CPU_MC, }, - { 0x00000480, 0x0000048B, CPU_VMX, }, - - { 0x00000600, 0x00000600, CPU_DEBUG, }, - { 0x00000680, 0x0000068F, CPU_LBRANCH, }, - { 0x000006C0, 0x000006CF, CPU_LBRANCH, }, - - { 0x000107CC, 0x000107D3, CPU_PMC, }, - - { 0xC0000080, 0xC0000080, CPU_FEATURES, }, - { 0xC0000081, 0xC0000084, CPU_CALL, }, - { 0xC0000100, 0xC0000102, CPU_BASE, }, - { 0xC0000103, 0xC0000103, CPU_TIME, }, - - { 0xC0010000, 0xC0010007, CPU_PMC, }, - { 0xC0010010, 0xC0010010, CPU_CONF, }, - { 0xC0010015, 0xC0010015, CPU_CONF, }, - { 0xC0010016, 0xC001001A, CPU_MTRR, }, - { 0xC001001D, 0xC001001D, CPU_MTRR, }, - { 0xC001001F, 0xC001001F, CPU_CONF, }, - { 0xC0010030, 0xC0010035, CPU_BIOS, }, - { 0xC0010044, 0xC0010048, CPU_MC, }, - { 0xC0010050, 0xC0010056, CPU_SMM, }, - { 0xC0010058, 0xC0010058, CPU_CONF, }, - { 0xC0010060, 0xC0010060, CPU_CACHE, }, - { 0xC0010061, 0xC0010068, CPU_SMM, }, - { 0xC0010069, 0xC001006B, CPU_SMM, }, - { 0xC0010070, 0xC0010071, CPU_SMM, }, - { 0xC0010111, 0xC0010113, CPU_SMM, }, - { 0xC0010114, 0xC0010118, CPU_SVM, }, - { 0xC0010140, 0xC0010141, CPU_OSVM, }, - { 0xC0011022, 0xC0011023, CPU_CONF, }, -}; - -static int is_typeflag_valid(unsigned cpu, unsigned flag) -{ - int i; - - /* Standard Registers should be always valid */ - if (flag >= CPU_TSS) - return 1; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (cpu_reg_range[i].flag == flag) - return 1; - } - - /* Invalid */ - return 0; -} - -static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max, - int index, unsigned flag) -{ - if (cpu_reg_range[index].flag == flag) { - *min = cpu_reg_range[index].min; - *max = cpu_reg_range[index].max; - } else - *max = 0; - - return *max; -} - -/* This function can also be called with seq = NULL for printk */ -static void print_cpu_data(struct seq_file *seq, unsigned type, - u32 low, u32 high) -{ - struct cpu_private *priv; - u64 val = high; - - if (seq) { - priv = seq->private; - if (priv->file) { - val = (val << 32) | low; - seq_printf(seq, "0x%llx\n", val); - } else - seq_printf(seq, " %08x: %08x_%08x\n", - type, high, low); - } else - printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low); -} - -/* This function can also be called with seq = NULL for printk */ -static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag) -{ - unsigned msr, msr_min, msr_max; - struct cpu_private *priv; - u32 low, high; - int i; - - if (seq) { - priv = seq->private; - if (priv->file) { - if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg, - &low, &high)) - print_cpu_data(seq, priv->reg, low, high); - return; - } - } - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag)) - continue; - - for (msr = msr_min; msr <= msr_max; msr++) { - if (rdmsr_safe_on_cpu(cpu, msr, &low, &high)) - continue; - print_cpu_data(seq, msr, low, high); - } - } -} - -static void print_tss(void *arg) -{ - struct pt_regs *regs = task_pt_regs(current); - struct seq_file *seq = arg; - unsigned int seg; - - seq_printf(seq, " RAX\t: %016lx\n", regs->ax); - seq_printf(seq, " RBX\t: %016lx\n", regs->bx); - seq_printf(seq, " RCX\t: %016lx\n", regs->cx); - seq_printf(seq, " RDX\t: %016lx\n", regs->dx); - - seq_printf(seq, " RSI\t: %016lx\n", regs->si); - seq_printf(seq, " RDI\t: %016lx\n", regs->di); - seq_printf(seq, " RBP\t: %016lx\n", regs->bp); - seq_printf(seq, " ESP\t: %016lx\n", regs->sp); - -#ifdef CONFIG_X86_64 - seq_printf(seq, " R08\t: %016lx\n", regs->r8); - seq_printf(seq, " R09\t: %016lx\n", regs->r9); - seq_printf(seq, " R10\t: %016lx\n", regs->r10); - seq_printf(seq, " R11\t: %016lx\n", regs->r11); - seq_printf(seq, " R12\t: %016lx\n", regs->r12); - seq_printf(seq, " R13\t: %016lx\n", regs->r13); - seq_printf(seq, " R14\t: %016lx\n", regs->r14); - seq_printf(seq, " R15\t: %016lx\n", regs->r15); -#endif - - asm("movl %%cs,%0" : "=r" (seg)); - seq_printf(seq, " CS\t: %04x\n", seg); - asm("movl %%ds,%0" : "=r" (seg)); - seq_printf(seq, " DS\t: %04x\n", seg); - seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff); - asm("movl %%es,%0" : "=r" (seg)); - seq_printf(seq, " ES\t: %04x\n", seg); - asm("movl %%fs,%0" : "=r" (seg)); - seq_printf(seq, " FS\t: %04x\n", seg); - asm("movl %%gs,%0" : "=r" (seg)); - seq_printf(seq, " GS\t: %04x\n", seg); - - seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags); - - seq_printf(seq, " EIP\t: %016lx\n", regs->ip); -} - -static void print_cr(void *arg) -{ - struct seq_file *seq = arg; - - seq_printf(seq, " cr0\t: %016lx\n", read_cr0()); - seq_printf(seq, " cr2\t: %016lx\n", read_cr2()); - seq_printf(seq, " cr3\t: %016lx\n", read_cr3()); - seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe()); -#ifdef CONFIG_X86_64 - seq_printf(seq, " cr8\t: %016lx\n", read_cr8()); -#endif -} - -static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt) -{ - seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size)); -} - -static void print_dt(void *seq) -{ - struct desc_ptr dt; - unsigned long ldt; - - /* IDT */ - store_idt((struct desc_ptr *)&dt); - print_desc_ptr("IDT", seq, dt); - - /* GDT */ - store_gdt((struct desc_ptr *)&dt); - print_desc_ptr("GDT", seq, dt); - - /* LDT */ - store_ldt(ldt); - seq_printf(seq, " LDT\t: %016lx\n", ldt); - - /* TR */ - store_tr(ldt); - seq_printf(seq, " TR\t: %016lx\n", ldt); -} - -static void print_dr(void *arg) -{ - struct seq_file *seq = arg; - unsigned long dr; - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - get_debugreg(dr, i); - seq_printf(seq, " dr%d\t: %016lx\n", i, dr); - } - - seq_printf(seq, "\n MSR\t:\n"); -} - -static void print_apic(void *arg) -{ - struct seq_file *seq = arg; - -#ifdef CONFIG_X86_LOCAL_APIC - seq_printf(seq, " LAPIC\t:\n"); - seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24); - seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR)); - seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI)); - seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI)); - seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI)); - seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR)); - seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR)); - seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV)); - seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR)); - seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR)); - seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR)); - seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2)); - seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT)); - seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR)); - seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC)); - seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0)); - seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1)); - seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR)); - seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); - seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); - seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); - if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { - unsigned int i, v, maxeilvt; - - v = apic_read(APIC_EFEAT); - maxeilvt = (v >> 16) & 0xff; - seq_printf(seq, " EFEAT\t\t: %08x\n", v); - seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); - - for (i = 0; i < maxeilvt; i++) { - v = apic_read(APIC_EILVTn(i)); - seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); - } - } -#endif /* CONFIG_X86_LOCAL_APIC */ - seq_printf(seq, "\n MSR\t:\n"); -} - -static int cpu_seq_show(struct seq_file *seq, void *v) -{ - struct cpu_private *priv = seq->private; - - if (priv == NULL) - return -EINVAL; - - switch (cpu_base[priv->type].flag) { - case CPU_TSS: - smp_call_function_single(priv->cpu, print_tss, seq, 1); - break; - case CPU_CR: - smp_call_function_single(priv->cpu, print_cr, seq, 1); - break; - case CPU_DT: - smp_call_function_single(priv->cpu, print_dt, seq, 1); - break; - case CPU_DEBUG: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_dr, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - case CPU_APIC: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_apic, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - - default: - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - } - seq_printf(seq, "\n"); - - return 0; -} - -static void *cpu_seq_start(struct seq_file *seq, loff_t *pos) -{ - if (*pos == 0) /* One time is enough ;-) */ - return seq; - - return NULL; -} - -static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - (*pos)++; - - return cpu_seq_start(seq, pos); -} - -static void cpu_seq_stop(struct seq_file *seq, void *v) -{ -} - -static const struct seq_operations cpu_seq_ops = { - .start = cpu_seq_start, - .next = cpu_seq_next, - .stop = cpu_seq_stop, - .show = cpu_seq_show, -}; - -static int cpu_seq_open(struct inode *inode, struct file *file) -{ - struct cpu_private *priv = inode->i_private; - struct seq_file *seq; - int err; - - err = seq_open(file, &cpu_seq_ops); - if (!err) { - seq = file->private_data; - seq->private = priv; - } - - return err; -} - -static int write_msr(struct cpu_private *priv, u64 val) -{ - u32 low, high; - - high = (val >> 32) & 0xffffffff; - low = val & 0xffffffff; - - if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high)) - return 0; - - return -EPERM; -} - -static int write_cpu_register(struct cpu_private *priv, const char *buf) -{ - int ret = -EPERM; - u64 val; - - ret = strict_strtoull(buf, 0, &val); - if (ret < 0) - return ret; - - /* Supporting only MSRs */ - if (priv->type < CPU_TSS_BIT) - return write_msr(priv, val); - - return ret; -} - -static ssize_t cpu_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *off) -{ - struct seq_file *seq = file->private_data; - struct cpu_private *priv = seq->private; - char buf[19]; - - if ((priv == NULL) || (count >= sizeof(buf))) - return -EINVAL; - - if (copy_from_user(&buf, ubuf, count)) - return -EFAULT; - - buf[count] = 0; - - if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write)) - if (!write_cpu_register(priv, buf)) - return count; - - return -EACCES; -} - -static const struct file_operations cpu_fops = { - .owner = THIS_MODULE, - .open = cpu_seq_open, - .read = seq_read, - .write = cpu_write, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, - unsigned file, struct dentry *dentry) -{ - struct cpu_private *priv = NULL; - - /* Already intialized */ - if (file == CPU_INDEX_BIT) - if (per_cpu(cpud_arr[type].init, cpu)) - return 0; - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - - priv->cpu = cpu; - priv->type = type; - priv->reg = reg; - priv->file = file; - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_priv_arr[type], cpu) = priv; - per_cpu(cpud_priv_count, cpu)++; - mutex_unlock(&cpu_debug_lock); - - if (file) - debugfs_create_file(cpu_file[file].name, S_IRUGO, - dentry, (void *)priv, &cpu_fops); - else { - debugfs_create_file(cpu_base[type].name, S_IRUGO, - per_cpu(cpud_arr[type].dentry, cpu), - (void *)priv, &cpu_fops); - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_arr[type].init, cpu) = 1; - mutex_unlock(&cpu_debug_lock); - } - - return 0; -} - -static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg, - struct dentry *dentry) -{ - unsigned file; - int err = 0; - - for (file = 0; file < ARRAY_SIZE(cpu_file); file++) { - err = cpu_create_file(cpu, type, reg, file, dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned reg, reg_min, reg_max; - int i, err = 0; - char reg_dir[12]; - u32 low, high; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, ®_min, ®_max, i, - cpu_base[type].flag)) - continue; - - for (reg = reg_min; reg <= reg_max; reg++) { - if (rdmsr_safe_on_cpu(cpu, reg, &low, &high)) - continue; - - sprintf(reg_dir, "0x%x", reg); - cpu_dentry = debugfs_create_dir(reg_dir, dentry); - err = cpu_init_regfiles(cpu, type, reg, cpu_dentry); - if (err) - return err; - } - } - - return err; -} - -static int cpu_init_allreg(unsigned cpu, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned type; - int err = 0; - - for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) { - if (!is_typeflag_valid(cpu, cpu_base[type].flag)) - continue; - cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry); - per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry; - - if (type < CPU_TSS_BIT) - err = cpu_init_msr(cpu, type, cpu_dentry); - else - err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT, - cpu_dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_cpu(void) -{ - struct dentry *cpu_dentry = NULL; - struct cpuinfo_x86 *cpui; - char cpu_dir[12]; - unsigned cpu; - int err = 0; - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) { - cpui = &cpu_data(cpu); - if (!cpu_has(cpui, X86_FEATURE_MSR)) - continue; - - sprintf(cpu_dir, "cpu%d", cpu); - cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir); - err = cpu_init_allreg(cpu, cpu_dentry); - - pr_info("cpu%d(%d) debug files %d\n", - cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu)); - if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) { - pr_err("Register files count %d exceeds limit %d\n", - per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES); - per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES; - err = -ENFILE; - } - if (err) - return err; - } - - return err; -} - -static int __init cpu_debug_init(void) -{ - cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir); - - return cpu_init_cpu(); -} - -static void __exit cpu_debug_exit(void) -{ - int i, cpu; - - if (cpu_debugfs_dir) - debugfs_remove_recursive(cpu_debugfs_dir); - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) - for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++) - kfree(per_cpu(cpud_priv_arr[i], cpu)); -} - -module_init(cpu_debug_init); -module_exit(cpu_debug_exit); - -MODULE_AUTHOR("Jaswinder Singh Rajput"); -MODULE_DESCRIPTION("CPU Debug module"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From cf11052a95275c942c1f45ea5fde43ce45bbba6d Mon Sep 17 00:00:00 2001 From: Erik Benada Date: Sun, 24 Jan 2010 13:43:04 -0800 Subject: [ARM] orion5x: D-link DNS-323 rev. B1 power-off This patch fixes power LED blinking and power-off on DNS-323 rev. B1. GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED to be controlled via leds-gpio. This pin has to be also set to 1 for power-off to work. To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 to do actual power-off. Tested on my DNS-323 rev. B1 Signed-off-by: Erik Benada Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index b31ca4c..8f159db 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -32,6 +33,7 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_SYSTEM_UP 3 #define DNS323_GPIO_LED_POWER 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 @@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = { { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, + { 3, MPP_GPIO }, /* system up flag */ { 4, MPP_GPIO }, /* power button LED */ { 5, MPP_GPIO }, /* power button LED */ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ @@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = { }, }; -/* DNS-323 specific power off method */ -static void dns323_power_off(void) +/* DNS-323 rev. A specific power off method */ +static void dns323a_power_off(void) { pr_info("%s: triggering power-off...\n", __func__); gpio_set_value(DNS323_GPIO_POWER_OFF, 1); } +/* DNS-323 rev B specific power off method */ +static void dns323b_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + /* Pin has to be changed to 1 and back to 0 to do actual power off. */ + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); + mdelay(100); + gpio_set_value(DNS323_GPIO_POWER_OFF, 0); +} + static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ @@ -424,11 +436,20 @@ static void __init dns323_init(void) if (dns323_dev_id() == MV88F5182_DEV_ID) orion5x_sata_init(&dns323_sata_data); - /* register dns323 specific power-off method */ + /* The 5182 has flag to indicate the system is up. Without this flag + * set, power LED will flash and cannot be controlled via leds-gpio. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1); + + /* Register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS323: failed to setup power-off GPIO\n"); - pm_power_off = dns323_power_off; + if (dns323_dev_id() == MV88F5182_DEV_ID) + pm_power_off = dns323b_power_off; + else + pm_power_off = dns323a_power_off; } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ -- cgit v0.10.2 From d8cc108f4fab42b380c6b3f3356f99e8dd5372e2 Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Mon, 18 Jan 2010 11:25:36 -0600 Subject: oprofile/x86: fix crash when profiling more than 28 events With multiplexing enabled oprofile crashs when profiling more than 28 events. This patch fixes this. Signed-off-by: Suravee Suthikulpanit Signed-off-by: Robert Richter diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index cb88b1a..76d4f56 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -222,7 +222,7 @@ static void nmi_cpu_switch(void *dummy) /* move to next set */ si += model->num_counters; - if ((si > model->num_virt_counters) || (counter_config[si].count == 0)) + if ((si >= model->num_virt_counters) || (counter_config[si].count == 0)) per_cpu(switch_index, cpu) = 0; else per_cpu(switch_index, cpu) = si; -- cgit v0.10.2 From e83e452b0692c9c13372540deb88a77d4ae2553d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 21 Jan 2010 23:26:27 +0100 Subject: oprofile/x86: add Xeon 7500 series support Add Xeon 7500 series support to oprofile. Straight forward: it's the same as Core i7, so just detect the model number. No user space changes needed. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 76d4f56..3347f69 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -598,6 +598,7 @@ static int __init ppro_init(char **cpu_type) case 15: case 23: *cpu_type = "i386/core_2"; break; + case 0x2e: case 26: spec = &op_arch_perfmon_spec; *cpu_type = "i386/core_i7"; -- cgit v0.10.2 From eceb784cec4dc0fcc2993d9ee4a7c0d111ada80a Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 25 Jan 2010 10:35:16 +0800 Subject: drm/i915: disable hotplug detect before Ironlake CRT detect This tries to fix CRT detect loop hang seen on some Ironlake form factor, to clear up hotplug detect state before taking CRT detect to make sure next hotplug detect cycle is consistent. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index ddefc87..79dd402 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -157,6 +157,9 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) adpa = I915_READ(PCH_ADPA); adpa &= ~ADPA_CRT_HOTPLUG_MASK; + /* disable HPD first */ + I915_WRITE(PCH_ADPA, adpa); + (void)I915_READ(PCH_ADPA); adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 | ADPA_CRT_HOTPLUG_WARMUP_10MS | -- cgit v0.10.2 From 0ce907f89118aa8748f950700b6919b1d8d8a038 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 23 Jan 2010 20:26:35 +0000 Subject: drm/i915: Prevent use of uninitialized pointers along error path. X.org hang with [drm:i915_gem_do_execbuffer] *ERROR* in dmesg http://bugzilla.kernel.org/show_bug.cgi?id=15114 Matej found he was hitting an error path within i915_gem_do_execbuffer() that led to the attempt to dereference an uninitialised pointer during cleanup. This path used to be safe as we used to calloc the object lists, but this was changed in c8e0f93. Daniel Vetter had also spotted this error and proposed a similar patch. [ 6379.732892] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740976] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740995] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 6379.740998] IP: [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741006] PGD babab067 PUD bb435067 PMD 0 [ 6379.741010] Oops: 0002 [#1] PREEMPT SMP [ 6379.741014] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill0/state [ 6379.741017] CPU 1 [ 6379.741021] Pid: 2186, comm: X Not tainted 2.6.33-rc4-00399-g24bc734 #142 M11D/ESPRIMO Mobile M9400 [ 6379.741023] RIP: 0010:[] [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741027] RSP: 0018:ffff8800b9047b78 EFLAGS: 00213206 [ 6379.741029] RAX: 0000000000000000 RBX: 000000000000004f RCX: ffff880098cac800 [ 6379.741032] RDX: ffff880098caca78 RSI: ffff8800b9047c98 RDI: ffff880098cd6540 [ 6379.741034] RBP: ffff8800b9047c78 R08: ffffffff814b96b5 R09: 0000000000000006 [ 6379.741036] R10: 0000000000000000 R11: 0000000000000003 R12: 000000000000004e [ 6379.741038] R13: 00000000fffffff7 R14: 0000000000000000 R15: 0000000000000001 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741045] CR2: 00000000000000a0 CR3: 00000000b9000000 CR4: 00000000000006e0 [ 6379.741048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6379.741050] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6379.741052] Process X (pid: 2186, threadinfo ffff8800b9046000, task ffff8800bb5d8000) [ 6379.741054] Stack: [ 6379.741055] ffffc90023f57000 ffffc90023f56fff ffffc90023f56fff ffffc90023f55000 [ 6379.741059] <0> ffff8800b9047c98 ffff8800bb43c840 ffff8800bf1de800 ffff8800bf1de820 [ 6379.741063] <0> ffff8800b9047bd8 ffff880098cac800 0000000000000000 0000000000000002 [ 6379.741068] Call Trace: [ 6379.741072] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741077] [] ? __vmalloc_node+0xa2/0xb0 [ 6379.741080] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741083] [] i915_gem_execbuffer+0x1b6/0x370 [ 6379.741086] [] drm_ioctl+0x1d5/0x460 [ 6379.741089] [] ? i915_gem_execbuffer+0x0/0x370 [ 6379.741093] [] i915_compat_ioctl+0x45/0x50 [ 6379.741097] [] compat_sys_ioctl+0xa9/0x1570 [ 6379.741102] [] ? vfs_read+0x13c/0x1a0 [ 6379.741106] [] sysenter_dispatch+0x7/0x2b [ 6379.741108] Code: 08 85 c0 74 52 31 db 0f 1f 80 00 00 00 00 48 63 c3 48 8b 8d 68 ff ff ff 48 8d 14 c1 48 8b 02 48 85 c0 74 25 48 8b 80 80 00 00 00 80 a0 00 00 00 00 00 00 00 48 8b 3a 48 85 ff 74 0c 48 c7 c6 [ 6379.741142] RIP [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741145] RSP [ 6379.741147] CR2: 00000000000000a0 [ 6379.741159] ---[ end trace 0598809afa4c31db ]--- Reported-by: Matej Laitl Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0c67924..1ef7ec4 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3742,6 +3742,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (object_list[i] == NULL) { DRM_ERROR("Invalid object handle %d at index %d\n", exec_list[i].handle, i); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } @@ -3750,6 +3752,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (obj_priv->in_execbuffer) { DRM_ERROR("Object %p appears more than once in object list\n", object_list[i]); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } -- cgit v0.10.2 From d3db7b485ad7c467a61279d6a8ef51a3c83352df Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 23 Jan 2010 15:45:22 +0300 Subject: drbd: null dereference bug epoch is always NULL here. Signed-off-by: Dan Carpenter Signed-off-by: Philipp Reisner diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index f22a528..d065c64 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1224,7 +1224,7 @@ static int receive_Barrier(struct drbd_conf *mdev, struct p_header *h) epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO); if (!epoch) { dev_warn(DEV, "Allocation of an epoch failed, slowing down\n"); - issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags); + issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); drbd_wait_ee_list_empty(mdev, &mdev->active_ee); if (issue_flush) { rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); -- cgit v0.10.2 From c062df61966405b0be6743bfb0cf300dca2fa7c2 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Sat, 23 Jan 2010 00:12:58 +0800 Subject: drm/i915: enable vblank interrupt on ironlake so far vblank interrupt on ironlake is disabled, this would cause bad gfx performance if userspace calls drm_wait_vblank. This patch enables vblank interrupt on ironlake and follows vblank get/put model. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 89a071a..e7472d8 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,6 +309,12 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); + if (de_iir & DE_PIPEA_VBLANK) + drm_handle_vblank(dev, 0); + + if (de_iir & DE_PIPEB_VBLANK) + drm_handle_vblank(dev, 1); + /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && (pch_iir & SDE_HOTPLUG_MASK)) { @@ -844,11 +850,11 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) if (!(pipeconf & PIPEACONF_ENABLE)) return -EINVAL; - if (IS_IRONLAKE(dev)) - return 0; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - if (IS_I965G(dev)) + if (IS_IRONLAKE(dev)) + ironlake_enable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else if (IS_I965G(dev)) i915_enable_pipestat(dev_priv, pipe, PIPE_START_VBLANK_INTERRUPT_ENABLE); else @@ -866,13 +872,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; - if (IS_IRONLAKE(dev)) - return; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_pipestat(dev_priv, pipe, - PIPE_VBLANK_INTERRUPT_ENABLE | - PIPE_START_VBLANK_INTERRUPT_ENABLE); + if (IS_IRONLAKE(dev)) + ironlake_disable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -1015,7 +1022,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 45da78e..2cc489b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1638,6 +1638,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d dpms off\n", pipe); + drm_vblank_off(dev, pipe); /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { -- cgit v0.10.2 From 8a6c77d645d9111f7bc01f908464301f5c3e0a05 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 21 Jan 2010 18:45:46 +0800 Subject: drm/i915: Fix the device info of Pineview Pineview doesn't has CXSR and need GTT-based hardware status page. It fixes a X boot hung issue on Pinview since commit cfdf1f Signed-off-by: Li Peng Acked-by: Zhao Yakui Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 46d8896..ecac882 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -120,7 +120,7 @@ const static struct intel_device_info intel_gm45_info = { const static struct intel_device_info intel_pineview_info = { .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1, - .has_pipe_cxsr = 1, + .need_gfx_hws = 1, .has_hotplug = 1, }; -- cgit v0.10.2 From bd1f46deba615971a58193afd0202878cadf19a7 Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Fri, 22 Jan 2010 14:06:53 -0700 Subject: PCI: fix nested spinlock hang in aer_inject The aer_inject module hangs in aer_inject() when checking the device's error masks. The hang is due to a recursive use of the aer_inject lock. The aer_inject() routine grabs the lock while processing the error and then calls pci_read_config_dword to read the masks. The pci_read_config_dword routine is earlier overridden by pci_read_aer, which among other things, grabs the aer_inject lock. Fixed by moving the pci_read_config_dword calls to read the masks to before the lock is taken. Acked-by: Huang Ying Signed-off-by: Andrew Patterson Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 8c30a95..223052b 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever, mask; + u32 sever, cor_mask, uncor_mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -339,6 +339,9 @@ static int aer_inject(struct aer_error_inj *einj) goto out_put; } pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, + &uncor_mask); rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR); if (!rp_pos_cap_err) { @@ -374,17 +377,14 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); - if (einj->cor_status && !(einj->cor_status & ~mask)) { + if (einj->cor_status && !(einj->cor_status & ~cor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The correctable error(s) is masked " "by device\n"); spin_unlock_irqrestore(&inject_lock, flags); goto out_put; } - - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); - if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The uncorrectable error(s) is masked " "by device\n"); -- cgit v0.10.2 From 74bf4076f2ed79b5510440b72a561823a8852ec0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 25 Jan 2010 15:11:53 -0500 Subject: tracing: Prevent kernel oops with corrupted buffer If the contents of the ftrace ring buffer gets corrupted and the trace file is read, it could create a kernel oops (usualy just killing the user task thread). This is caused by the checking of the pid in the buffer. If the pid is negative, it still references the cmdline cache array, which could point to an invalid address. The simple fix is to test for negative PIDs. Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0df1b0f..eac6875 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -951,6 +951,11 @@ void trace_find_cmdline(int pid, char comm[]) return; } + if (WARN_ON_ONCE(pid < 0)) { + strcpy(comm, ""); + return; + } + if (pid > PID_MAX_DEFAULT) { strcpy(comm, "<...>"); return; -- cgit v0.10.2 From 0b5d9b2689af0f59aeba67dc749b3681290d2166 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 22 Jan 2010 14:22:34 -0800 Subject: iwlwifi: fix pointer signedness warning There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cde09a8..90fbdb2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, } EXPORT_SYMBOL(iwl_add_station); -static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr) { unsigned long flags; u8 sta_id = iwl_find_station(priv, addr); @@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv, { struct iwl_rem_sta_cmd *rm_sta = (struct iwl_rem_sta_cmd *)cmd->cmd.payload; - const char *addr = rm_sta->addr; + const u8 *addr = rm_sta->addr; if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", -- cgit v0.10.2 From aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 23 Jan 2010 20:04:18 +0100 Subject: ath9k: fix eeprom INI values override for 2GHz-only cards Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau Reported-by: Jorge Boncompte Cc: stable@kernel.org Tested-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2ec61f0..ae37144 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) } } -static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah) +static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah) { u32 i, j; - if ((ah->hw_version.devid == AR9280_DEVID_PCI) && - test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) { + if (ah->hw_version.devid == AR9280_DEVID_PCI) { /* EEPROM Fixup */ for (i = 0; i < ah->iniModes.ia_rows; i++) { @@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah) if (r) return r; - ath9k_hw_init_11a_eeprom_fix(ah); + ath9k_hw_init_eeprom_fix(ah); r = ath9k_hw_init_macaddr(ah); if (r) { -- cgit v0.10.2 From 1097df3ffe855eb1476496fa5394816fb197af05 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 20 Jan 2010 11:31:11 +0800 Subject: ocfs2: Sync max_inline_data_with_xattr from tools. In ocfs2-tools, we have added ocfs2_max_inline_data_with_xattr, so add it in the kernel's ocfs2_fs.h. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 1a1a679..7638a38 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -1417,9 +1417,16 @@ static inline int ocfs2_fast_symlink_chars(int blocksize) return blocksize - offsetof(struct ocfs2_dinode, id2.i_symlink); } -static inline int ocfs2_max_inline_data(int blocksize) +static inline int ocfs2_max_inline_data_with_xattr(int blocksize, + struct ocfs2_dinode *di) { - return blocksize - offsetof(struct ocfs2_dinode, id2.i_data.id_data); + if (di && (di->i_dyn_features & OCFS2_INLINE_XATTR_FL)) + return blocksize - + offsetof(struct ocfs2_dinode, id2.i_data.id_data) - + di->i_xattr_inline_size; + else + return blocksize - + offsetof(struct ocfs2_dinode, id2.i_data.id_data); } static inline int ocfs2_extent_recs_per_inode(int blocksize) -- cgit v0.10.2 From e5f2cb2b1ad05473fffe6970618997b906f23873 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Fri, 22 Jan 2010 21:58:04 +0800 Subject: ocfs2: fix a misleading variable name a local variable "dlm_version" is used as a fs locking version. rename it fs_version. Signed-off-by: Wengang Wang Signed-off-by: Joel Becker diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index e49c410..3038c92 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -277,7 +277,7 @@ static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) u32 dlm_key; struct dlm_ctxt *dlm; struct o2dlm_private *priv; - struct dlm_protocol_version dlm_version; + struct dlm_protocol_version fs_version; BUG_ON(conn == NULL); BUG_ON(o2cb_stack.sp_proto == NULL); @@ -304,18 +304,18 @@ static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) /* used by the dlm code to make message headers unique, each * node in this domain must agree on this. */ dlm_key = crc32_le(0, conn->cc_name, conn->cc_namelen); - dlm_version.pv_major = conn->cc_version.pv_major; - dlm_version.pv_minor = conn->cc_version.pv_minor; + fs_version.pv_major = conn->cc_version.pv_major; + fs_version.pv_minor = conn->cc_version.pv_minor; - dlm = dlm_register_domain(conn->cc_name, dlm_key, &dlm_version); + dlm = dlm_register_domain(conn->cc_name, dlm_key, &fs_version); if (IS_ERR(dlm)) { rc = PTR_ERR(dlm); mlog_errno(rc); goto out_free; } - conn->cc_version.pv_major = dlm_version.pv_major; - conn->cc_version.pv_minor = dlm_version.pv_minor; + conn->cc_version.pv_major = fs_version.pv_major; + conn->cc_version.pv_minor = fs_version.pv_minor; conn->cc_lockspace = dlm; dlm_register_eviction_cb(dlm, &priv->op_eviction_cb); -- cgit v0.10.2 From 2bd632165c1f783888bd4cbed95f2f304829159b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jan 2010 16:57:38 -0800 Subject: ocfs2/trivial: Remove trailing whitespaces Patch removes trailing whitespaces. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 3dae4a1..7e9df11 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -599,7 +599,7 @@ bail: return ret; } -/* +/* * ocfs2_dio_end_io is called by the dio core when a dio is finished. We're * particularly interested in the aio/dio case. Like the core uses * i_alloc_sem, we use the rw_lock DLM lock to protect io on one node from @@ -670,7 +670,7 @@ static ssize_t ocfs2_direct_IO(int rw, ret = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, - nr_segs, + nr_segs, ocfs2_direct_IO_get_blocks, ocfs2_dio_end_io); diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index d43d34a..21c808f 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -368,7 +368,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr, } ocfs2_metadata_cache_io_unlock(ci); - mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n", + mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n", (unsigned long long)block, nr, ((flags & OCFS2_BH_IGNORE_CACHE) || ignore_cache) ? "no" : "yes", flags); diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index eda5b8b..5c98900 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -78,7 +78,7 @@ static struct o2hb_callback *hbcall_from_type(enum o2hb_callback_type type); unsigned int o2hb_dead_threshold = O2HB_DEFAULT_DEAD_THRESHOLD; -/* Only sets a new threshold if there are no active regions. +/* Only sets a new threshold if there are no active regions. * * No locking or otherwise interesting code is required for reading * o2hb_dead_threshold as it can't change once regions are active and @@ -170,7 +170,7 @@ static void o2hb_write_timeout(struct work_struct *work) mlog(ML_ERROR, "Heartbeat write timeout to device %s after %u " "milliseconds\n", reg->hr_dev_name, - jiffies_to_msecs(jiffies - reg->hr_last_timeout_start)); + jiffies_to_msecs(jiffies - reg->hr_last_timeout_start)); o2quo_disk_timeout(); } @@ -624,7 +624,7 @@ static int o2hb_check_slot(struct o2hb_region *reg, "seq %llu last %llu changed %u equal %u\n", slot->ds_node_num, (long long)slot->ds_last_generation, le32_to_cpu(hb_block->hb_cksum), - (unsigned long long)le64_to_cpu(hb_block->hb_seq), + (unsigned long long)le64_to_cpu(hb_block->hb_seq), (unsigned long long)slot->ds_last_time, slot->ds_changed_samples, slot->ds_equal_samples); diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 334f231..938ba18 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -930,7 +930,7 @@ static void o2net_sendpage(struct o2net_sock_container *sc, cond_resched(); continue; } - mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT + mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT " failed with %zd\n", size, SC_NODEF_ARGS(sc), ret); o2net_ensure_shutdown(nn, sc, 0); break; @@ -1483,7 +1483,7 @@ static void o2net_idle_timer(unsigned long data) mlog(ML_NOTICE, "here are some times that might help debug the " "situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv " "%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n", - sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec, + sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec, now.tv_sec, (long) now.tv_usec, sc->sc_tv_data_ready.tv_sec, (long) sc->sc_tv_data_ready.tv_usec, sc->sc_tv_advance_start.tv_sec, diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 8d58cfe..96fa7eb 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -32,10 +32,10 @@ * on their number */ #define O2NET_QUORUM_DELAY_MS ((o2hb_dead_threshold + 2) * O2HB_REGION_TIMEOUT_MS) -/* +/* * This version number represents quite a lot, unfortunately. It not * only represents the raw network message protocol on the wire but also - * locking semantics of the file system using the protocol. It should + * locking semantics of the file system using the protocol. It should * be somewhere else, I'm sure, but right now it isn't. * * With version 11, we separate out the filesystem locking portion. The diff --git a/fs/ocfs2/dlm/dlmapi.h b/fs/ocfs2/dlm/dlmapi.h index b5786a7..3cfa114 100644 --- a/fs/ocfs2/dlm/dlmapi.h +++ b/fs/ocfs2/dlm/dlmapi.h @@ -95,7 +95,7 @@ const char *dlm_errname(enum dlm_status err); mlog(ML_ERROR, "dlm status = %s\n", dlm_errname((st))); \ } while (0) -#define DLM_LKSB_UNUSED1 0x01 +#define DLM_LKSB_UNUSED1 0x01 #define DLM_LKSB_PUT_LVB 0x02 #define DLM_LKSB_GET_LVB 0x04 #define DLM_LKSB_UNUSED2 0x08 diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c index 01cf8cc..dccc439 100644 --- a/fs/ocfs2/dlm/dlmast.c +++ b/fs/ocfs2/dlm/dlmast.c @@ -123,7 +123,7 @@ static void __dlm_queue_ast(struct dlm_ctxt *dlm, struct dlm_lock *lock) dlm_lock_put(lock); /* free up the reserved bast that we are cancelling. * guaranteed that this will not be the last reserved - * ast because *both* an ast and a bast were reserved + * ast because *both* an ast and a bast were reserved * to get to this point. the res->spinlock will not be * taken here */ dlm_lockres_release_ast(dlm, res); diff --git a/fs/ocfs2/dlm/dlmconvert.c b/fs/ocfs2/dlm/dlmconvert.c index ca96bce..f283bce 100644 --- a/fs/ocfs2/dlm/dlmconvert.c +++ b/fs/ocfs2/dlm/dlmconvert.c @@ -396,7 +396,7 @@ static enum dlm_status dlm_send_remote_convert_request(struct dlm_ctxt *dlm, /* instead of logging the same network error over * and over, sleep here and wait for the heartbeat * to notice the node is dead. times out after 5s. */ - dlm_wait_for_node_death(dlm, res->owner, + dlm_wait_for_node_death(dlm, res->owner, DLM_NODE_DEATH_WAIT_MAX); ret = DLM_RECOVERING; mlog(0, "node %u died so returning DLM_RECOVERING " diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 0334000..988c905 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -816,7 +816,7 @@ static int dlm_query_join_handler(struct o2net_msg *msg, u32 len, void *data, } /* Once the dlm ctxt is marked as leaving then we don't want - * to be put in someone's domain map. + * to be put in someone's domain map. * Also, explicitly disallow joining at certain troublesome * times (ie. during recovery). */ if (dlm && dlm->dlm_state != DLM_CTXT_LEAVING) { diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c index 437698e..73333777 100644 --- a/fs/ocfs2/dlm/dlmlock.c +++ b/fs/ocfs2/dlm/dlmlock.c @@ -269,7 +269,7 @@ static enum dlm_status dlmlock_remote(struct dlm_ctxt *dlm, } dlm_revert_pending_lock(res, lock); dlm_lock_put(lock); - } else if (dlm_is_recovery_lock(res->lockname.name, + } else if (dlm_is_recovery_lock(res->lockname.name, res->lockname.len)) { /* special case for the $RECOVERY lock. * there will never be an AST delivered to put diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 03ccf9a..a659606 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -366,7 +366,7 @@ void dlm_hb_event_notify_attached(struct dlm_ctxt *dlm, int idx, int node_up) struct dlm_master_list_entry *mle; assert_spin_locked(&dlm->spinlock); - + list_for_each_entry(mle, &dlm->mle_hb_events, hb_events) { if (node_up) dlm_mle_node_up(dlm, mle, NULL, idx); @@ -833,7 +833,7 @@ lookup: __dlm_insert_mle(dlm, mle); /* still holding the dlm spinlock, check the recovery map - * to see if there are any nodes that still need to be + * to see if there are any nodes that still need to be * considered. these will not appear in the mle nodemap * but they might own this lockres. wait on them. */ bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0); @@ -883,7 +883,7 @@ redo_request: msleep(500); } continue; - } + } dlm_kick_recovery_thread(dlm); msleep(1000); @@ -939,8 +939,8 @@ wait: res->lockname.name, blocked); if (++tries > 20) { mlog(ML_ERROR, "%s:%.*s: spinning on " - "dlm_wait_for_lock_mastery, blocked=%d\n", - dlm->name, res->lockname.len, + "dlm_wait_for_lock_mastery, blocked=%d\n", + dlm->name, res->lockname.len, res->lockname.name, blocked); dlm_print_one_lock_resource(res); dlm_print_one_mle(mle); @@ -1029,7 +1029,7 @@ recheck: ret = dlm_restart_lock_mastery(dlm, res, mle, *blocked); b = (mle->type == DLM_MLE_BLOCK); if ((*blocked && !b) || (!*blocked && b)) { - mlog(0, "%s:%.*s: status change: old=%d new=%d\n", + mlog(0, "%s:%.*s: status change: old=%d new=%d\n", dlm->name, res->lockname.len, res->lockname.name, *blocked, b); *blocked = b; @@ -1602,7 +1602,7 @@ send_response: } mlog(0, "%u is the owner of %.*s, cleaning everyone else\n", dlm->node_num, res->lockname.len, res->lockname.name); - ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx, + ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx, DLM_ASSERT_MASTER_MLE_CLEANUP); if (ret < 0) { mlog(ML_ERROR, "failed to dispatch assert master work\n"); @@ -1701,7 +1701,7 @@ again: if (r & DLM_ASSERT_RESPONSE_REASSERT) { mlog(0, "%.*s: node %u create mles on other " - "nodes and requests a re-assert\n", + "nodes and requests a re-assert\n", namelen, lockname, to); reassert = 1; } @@ -1812,7 +1812,7 @@ int dlm_assert_master_handler(struct o2net_msg *msg, u32 len, void *data, spin_unlock(&dlm->master_lock); spin_unlock(&dlm->spinlock); goto done; - } + } } } spin_unlock(&dlm->master_lock); @@ -1883,7 +1883,7 @@ ok: int extra_ref = 0; int nn = -1; int rr, err = 0; - + spin_lock(&mle->spinlock); if (mle->type == DLM_MLE_BLOCK || mle->type == DLM_MLE_MIGRATION) extra_ref = 1; @@ -1891,7 +1891,7 @@ ok: /* MASTER mle: if any bits set in the response map * then the calling node needs to re-assert to clear * up nodes that this node contacted */ - while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES, + while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES, nn+1)) < O2NM_MAX_NODES) { if (nn != dlm->node_num && nn != assert->node_idx) master_request = 1; @@ -2002,7 +2002,7 @@ kill: __dlm_print_one_lock_resource(res); spin_unlock(&res->spinlock); spin_unlock(&dlm->spinlock); - *ret_data = (void *)res; + *ret_data = (void *)res; dlm_put(dlm); return -EINVAL; } @@ -2040,10 +2040,10 @@ int dlm_dispatch_assert_master(struct dlm_ctxt *dlm, item->u.am.request_from = request_from; item->u.am.flags = flags; - if (ignore_higher) - mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len, + if (ignore_higher) + mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len, res->lockname.name); - + spin_lock(&dlm->work_lock); list_add_tail(&item->list, &dlm->work_list); spin_unlock(&dlm->work_lock); @@ -2133,7 +2133,7 @@ put: * think that $RECOVERY is currently mastered by a dead node. If so, * we wait a short time to allow that node to get notified by its own * heartbeat stack, then check again. All $RECOVERY lock resources - * mastered by dead nodes are purged when the hearbeat callback is + * mastered by dead nodes are purged when the hearbeat callback is * fired, so we can know for sure that it is safe to continue once * the node returns a live node or no node. */ static int dlm_pre_master_reco_lockres(struct dlm_ctxt *dlm, @@ -2174,7 +2174,7 @@ static int dlm_pre_master_reco_lockres(struct dlm_ctxt *dlm, ret = -EAGAIN; } spin_unlock(&dlm->spinlock); - mlog(0, "%s: reco lock master is %u\n", dlm->name, + mlog(0, "%s: reco lock master is %u\n", dlm->name, master); break; } @@ -2602,7 +2602,7 @@ fail: mlog(0, "%s:%.*s: timed out during migration\n", dlm->name, res->lockname.len, res->lockname.name); - /* avoid hang during shutdown when migrating lockres + /* avoid hang during shutdown when migrating lockres * to a node which also goes down */ if (dlm_is_node_dead(dlm, target)) { mlog(0, "%s:%.*s: expected migration " @@ -2738,7 +2738,7 @@ static int dlm_migration_can_proceed(struct dlm_ctxt *dlm, can_proceed = !!(res->state & DLM_LOCK_RES_MIGRATING); spin_unlock(&res->spinlock); - /* target has died, so make the caller break out of the + /* target has died, so make the caller break out of the * wait_event, but caller must recheck the domain_map */ spin_lock(&dlm->spinlock); if (!test_bit(mig_target, dlm->domain_map)) diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 2f9e4e1..57736d3 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1050,7 +1050,7 @@ static void dlm_move_reco_locks_to_list(struct dlm_ctxt *dlm, if (lock->ml.node == dead_node) { mlog(0, "AHA! there was " "a $RECOVERY lock for dead " - "node %u (%s)!\n", + "node %u (%s)!\n", dead_node, dlm->name); list_del_init(&lock->list); dlm_lock_put(lock); @@ -1839,7 +1839,7 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm, * the lvb. */ memcpy(res->lvb, mres->lvb, DLM_LVB_LEN); } else { - /* otherwise, the node is sending its + /* otherwise, the node is sending its * most recent valid lvb info */ BUG_ON(ml->type != LKM_EXMODE && ml->type != LKM_PRMODE); @@ -2114,7 +2114,7 @@ static void dlm_revalidate_lvb(struct dlm_ctxt *dlm, assert_spin_locked(&res->spinlock); if (res->owner == dlm->node_num) - /* if this node owned the lockres, and if the dead node + /* if this node owned the lockres, and if the dead node * had an EX when he died, blank out the lvb */ search_node = dead_node; else { @@ -2152,7 +2152,7 @@ static void dlm_free_dead_locks(struct dlm_ctxt *dlm, /* this node is the lockres master: * 1) remove any stale locks for the dead node - * 2) if the dead node had an EX when he died, blank out the lvb + * 2) if the dead node had an EX when he died, blank out the lvb */ assert_spin_locked(&dlm->spinlock); assert_spin_locked(&res->spinlock); @@ -2260,7 +2260,7 @@ static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node) } spin_unlock(&res->spinlock); continue; - } + } spin_lock(&res->spinlock); /* zero the lvb if necessary */ dlm_revalidate_lvb(dlm, res, dead_node); @@ -2411,7 +2411,7 @@ static void dlm_reco_unlock_ast(void *astdata, enum dlm_status st) * this function on each node racing to become the recovery * master will not stop attempting this until either: * a) this node gets the EX (and becomes the recovery master), - * or b) dlm->reco.new_master gets set to some nodenum + * or b) dlm->reco.new_master gets set to some nodenum * != O2NM_INVALID_NODE_NUM (another node will do the reco). * so each time a recovery master is needed, the entire cluster * will sync at this point. if the new master dies, that will @@ -2424,7 +2424,7 @@ static int dlm_pick_recovery_master(struct dlm_ctxt *dlm) mlog(0, "starting recovery of %s at %lu, dead=%u, this=%u\n", dlm->name, jiffies, dlm->reco.dead_node, dlm->node_num); -again: +again: memset(&lksb, 0, sizeof(lksb)); ret = dlmlock(dlm, LKM_EXMODE, &lksb, LKM_NOQUEUE|LKM_RECOVERY, @@ -2437,8 +2437,8 @@ again: if (ret == DLM_NORMAL) { mlog(0, "dlm=%s dlmlock says I got it (this=%u)\n", dlm->name, dlm->node_num); - - /* got the EX lock. check to see if another node + + /* got the EX lock. check to see if another node * just became the reco master */ if (dlm_reco_master_ready(dlm)) { mlog(0, "%s: got reco EX lock, but %u will " @@ -2451,12 +2451,12 @@ again: /* see if recovery was already finished elsewhere */ spin_lock(&dlm->spinlock); if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) { - status = -EINVAL; + status = -EINVAL; mlog(0, "%s: got reco EX lock, but " "node got recovered already\n", dlm->name); if (dlm->reco.new_master != O2NM_INVALID_NODE_NUM) { mlog(ML_ERROR, "%s: new master is %u " - "but no dead node!\n", + "but no dead node!\n", dlm->name, dlm->reco.new_master); BUG(); } @@ -2468,7 +2468,7 @@ again: * set the master and send the messages to begin recovery */ if (!status) { mlog(0, "%s: dead=%u, this=%u, sending " - "begin_reco now\n", dlm->name, + "begin_reco now\n", dlm->name, dlm->reco.dead_node, dlm->node_num); status = dlm_send_begin_reco_message(dlm, dlm->reco.dead_node); @@ -2501,7 +2501,7 @@ again: mlog(0, "dlm=%s dlmlock says another node got it (this=%u)\n", dlm->name, dlm->node_num); /* another node is master. wait on - * reco.new_master != O2NM_INVALID_NODE_NUM + * reco.new_master != O2NM_INVALID_NODE_NUM * for at most one second */ wait_event_timeout(dlm->dlm_reco_thread_wq, dlm_reco_master_ready(dlm), @@ -2599,7 +2599,7 @@ retry: } if (ret < 0) { struct dlm_lock_resource *res; - /* this is now a serious problem, possibly ENOMEM + /* this is now a serious problem, possibly ENOMEM * in the network stack. must retry */ mlog_errno(ret); mlog(ML_ERROR, "begin reco of dlm %s to node %u " @@ -2612,7 +2612,7 @@ retry: } else { mlog(ML_ERROR, "recovery lock not found\n"); } - /* sleep for a bit in hopes that we can avoid + /* sleep for a bit in hopes that we can avoid * another ENOMEM */ msleep(100); goto retry; @@ -2664,7 +2664,7 @@ int dlm_begin_reco_handler(struct o2net_msg *msg, u32 len, void *data, } if (dlm->reco.dead_node != O2NM_INVALID_NODE_NUM) { mlog(ML_NOTICE, "%s: dead_node previously set to %u, " - "node %u changing it to %u\n", dlm->name, + "node %u changing it to %u\n", dlm->name, dlm->reco.dead_node, br->node_idx, br->dead_node); } dlm_set_reco_master(dlm, br->node_idx); @@ -2730,8 +2730,8 @@ stage2: if (ret < 0) { mlog_errno(ret); if (dlm_is_host_down(ret)) { - /* this has no effect on this recovery - * session, so set the status to zero to + /* this has no effect on this recovery + * session, so set the status to zero to * finish out the last recovery */ mlog(ML_ERROR, "node %u went down after this " "node finished recovery.\n", nodenum); @@ -2768,7 +2768,7 @@ int dlm_finalize_reco_handler(struct o2net_msg *msg, u32 len, void *data, mlog(0, "%s: node %u finalizing recovery stage%d of " "node %u (%u:%u)\n", dlm->name, fr->node_idx, stage, fr->dead_node, dlm->reco.dead_node, dlm->reco.new_master); - + spin_lock(&dlm->spinlock); if (dlm->reco.new_master != fr->node_idx) { diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c index 00f53b2..49e29ec 100644 --- a/fs/ocfs2/dlm/dlmunlock.c +++ b/fs/ocfs2/dlm/dlmunlock.c @@ -190,8 +190,8 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm, actions &= ~(DLM_UNLOCK_REMOVE_LOCK| DLM_UNLOCK_REGRANT_LOCK| DLM_UNLOCK_CLEAR_CONVERT_TYPE); - } else if (status == DLM_RECOVERING || - status == DLM_MIGRATING || + } else if (status == DLM_RECOVERING || + status == DLM_MIGRATING || status == DLM_FORWARD) { /* must clear the actions because this unlock * is about to be retried. cannot free or do @@ -661,14 +661,14 @@ retry: if (call_ast) { mlog(0, "calling unlockast(%p, %d)\n", data, status); if (is_master) { - /* it is possible that there is one last bast + /* it is possible that there is one last bast * pending. make sure it is flushed, then * call the unlockast. * not an issue if this is a mastered remotely, * since this lock has been removed from the * lockres queues and cannot be found. */ dlm_kick_thread(dlm, NULL); - wait_event(dlm->ast_wq, + wait_event(dlm->ast_wq, dlm_lock_basts_flushed(dlm, lock)); } (*unlockast)(data, status); diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index c5e4a49..172f4c6 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3155,7 +3155,7 @@ out: /* Mark the lockres as being dropped. It will no longer be * queued if blocking, but we still may have to wait on it * being dequeued from the downconvert thread before we can consider - * it safe to drop. + * it safe to drop. * * You can *not* attempt to call cluster_lock on this lockres anymore. */ void ocfs2_mark_lockres_freeing(struct ocfs2_lock_res *lockres) diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index 15713cb..19ad145 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -239,7 +239,7 @@ static int ocfs2_encode_fh(struct dentry *dentry, u32 *fh_in, int *max_len, mlog(0, "Encoding parent: blkno: %llu, generation: %u\n", (unsigned long long)blkno, generation); } - + *max_len = len; bail: diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 06ccf6a..65e9375 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -749,7 +749,7 @@ static int ocfs2_write_zero_page(struct inode *inode, int ret; offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */ - /* ugh. in prepare/commit_write, if from==to==start of block, we + /* ugh. in prepare/commit_write, if from==to==start of block, we ** skip the prepare. make sure we never send an offset for the start ** of a block */ @@ -1779,7 +1779,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, struct inode *inode = dentry->d_inode; loff_t saved_pos, end; - /* + /* * We start with a read level meta lock and only jump to an ex * if we need to make modifications here. */ @@ -2033,7 +2033,7 @@ out_dio: pos + count - 1); } - /* + /* * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io * function pointer which is called when o_direct io completes so that * it can unlock our rw lock. (it's the clustered equivalent of @@ -2198,7 +2198,7 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, goto bail; } - /* + /* * buffered reads protect themselves in ->readpage(). O_DIRECT reads * need locks to protect pending reads from racing with truncate. */ @@ -2220,10 +2220,10 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, * We're fine letting folks race truncates and extending * writes with read across the cluster, just like they can * locally. Hence no rw_lock during read. - * + * * Take and drop the meta data lock to update inode fields * like i_size. This allows the checks down below - * generic_file_aio_read() a chance of actually working. + * generic_file_aio_read() a chance of actually working. */ ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level); if (ret < 0) { @@ -2248,7 +2248,7 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, bail: if (have_alloc_sem) up_read(&inode->i_alloc_sem); - if (rw_level != -1) + if (rw_level != -1) ocfs2_rw_unlock(inode, rw_level); mlog_exit(ret); diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 0297fb8..88459bd 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -475,7 +475,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, if (args->fi_flags & OCFS2_FI_FLAG_ORPHAN_RECOVERY) { status = ocfs2_try_open_lock(inode, 0); if (status) { - make_bad_inode(inode); + make_bad_inode(inode); return status; } } @@ -684,7 +684,7 @@ bail: return status; } -/* +/* * Serialize with orphan dir recovery. If the process doing * recovery on this orphan dir does an iget() with the dir * i_mutex held, we'll deadlock here. Instead we detect this diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index bf34c49..9336c60 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -2034,7 +2034,7 @@ static int ocfs2_queue_orphans(struct ocfs2_super *osb, status = -ENOENT; mlog_errno(status); return status; - } + } mutex_lock(&orphan_dir_inode->i_mutex); status = ocfs2_inode_lock(orphan_dir_inode, NULL, 0); diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 2606991..755cd49 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1062,7 +1062,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) "file system, but write access is " "unavailable.\n"); else - mlog_errno(status); + mlog_errno(status); goto read_super_error; } diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c index c613693..a0a120e 100644 --- a/fs/ocfs2/uptodate.c +++ b/fs/ocfs2/uptodate.c @@ -267,8 +267,8 @@ static int ocfs2_buffer_cached(struct ocfs2_caching_info *ci, } /* Warning: even if it returns true, this does *not* guarantee that - * the block is stored in our inode metadata cache. - * + * the block is stored in our inode metadata cache. + * * This can be called under lock_buffer() */ int ocfs2_buffer_uptodate(struct ocfs2_caching_info *ci, -- cgit v0.10.2 From 71656fa6ec10473eb9b646c10a2173fdea2f83c9 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jan 2010 16:57:39 -0800 Subject: ocfs2/dlm: Ignore LVBs of locks in the Blocked list During lock resource migration, o2dlm fills the packet with a LVB from the first valid lock. For sanity, it ensures that the other valid locks have the same LVB. If not, it BUGs. The valid locks are ones that have granted EX or PR lock levels and are either on the Granted or Converting lists. Locks in the Blocked list cannot have a valid LVB. This patch ensures that we skip the locks in the Blocked list. Fixes oss bugzilla#1202 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1202 Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 57736d3..9d67894 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1164,6 +1164,39 @@ static void dlm_init_migratable_lockres(struct dlm_migratable_lockres *mres, mres->master = master; } +static void dlm_prepare_lvb_for_migration(struct dlm_lock *lock, + struct dlm_migratable_lockres *mres, + int queue) +{ + if (!lock->lksb) + return; + + /* Ignore lvb in all locks in the blocked list */ + if (queue == DLM_BLOCKED_LIST) + return; + + /* Only consider lvbs in locks with granted EX or PR lock levels */ + if (lock->ml.type != LKM_EXMODE && lock->ml.type != LKM_PRMODE) + return; + + if (dlm_lvb_is_empty(mres->lvb)) { + memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN); + return; + } + + /* Ensure the lvb copied for migration matches in other valid locks */ + if (!memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN)) + return; + + mlog(ML_ERROR, "Mismatched lvb in lock cookie=%u:%llu, name=%.*s, " + "node=%u\n", + dlm_get_lock_cookie_node(be64_to_cpu(lock->ml.cookie)), + dlm_get_lock_cookie_seq(be64_to_cpu(lock->ml.cookie)), + lock->lockres->lockname.len, lock->lockres->lockname.name, + lock->ml.node); + dlm_print_one_lock_resource(lock->lockres); + BUG(); +} /* returns 1 if this lock fills the network structure, * 0 otherwise */ @@ -1181,20 +1214,7 @@ static int dlm_add_lock_to_array(struct dlm_lock *lock, ml->list = queue; if (lock->lksb) { ml->flags = lock->lksb->flags; - /* send our current lvb */ - if (ml->type == LKM_EXMODE || - ml->type == LKM_PRMODE) { - /* if it is already set, this had better be a PR - * and it has to match */ - if (!dlm_lvb_is_empty(mres->lvb) && - (ml->type == LKM_EXMODE || - memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))) { - mlog(ML_ERROR, "mismatched lvbs!\n"); - dlm_print_one_lock_resource(lock->lockres); - BUG(); - } - memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN); - } + dlm_prepare_lvb_for_migration(lock, mres, queue); } ml->node = lock->ml.node; mres->num_locks++; -- cgit v0.10.2 From 26636bf6b2010aa84c54d577231e017ba71493d0 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jan 2010 16:57:40 -0800 Subject: ocfs2/dlm: Print more messages during lock migration When a lock resource is migrated, the dlm compares the migrated locks with that that was already existing on the new node. If the comparison fails, it BUGs. This patch prints more messages when the comparison fails inorder to help with the root cause analyis. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1206 This does not fix bz1206. However, if we run into it again, we will have more information to chew on. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 9d67894..cfb2ae9 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -1750,6 +1750,7 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm, struct dlm_lock *lock = NULL; u8 from = O2NM_MAX_NODES; unsigned int added = 0; + __be64 c; mlog(0, "running %d locks for this lockres\n", mres->num_locks); for (i=0; inum_locks; i++) { @@ -1797,19 +1798,48 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm, /* lock is always created locally first, and * destroyed locally last. it must be on the list */ if (!lock) { - __be64 c = ml->cookie; - mlog(ML_ERROR, "could not find local lock " - "with cookie %u:%llu!\n", + c = ml->cookie; + mlog(ML_ERROR, "Could not find local lock " + "with cookie %u:%llu, node %u, " + "list %u, flags 0x%x, type %d, " + "conv %d, highest blocked %d\n", dlm_get_lock_cookie_node(be64_to_cpu(c)), - dlm_get_lock_cookie_seq(be64_to_cpu(c))); + dlm_get_lock_cookie_seq(be64_to_cpu(c)), + ml->node, ml->list, ml->flags, ml->type, + ml->convert_type, ml->highest_blocked); + __dlm_print_one_lock_resource(res); + BUG(); + } + + if (lock->ml.node != ml->node) { + c = lock->ml.cookie; + mlog(ML_ERROR, "Mismatched node# in lock " + "cookie %u:%llu, name %.*s, node %u\n", + dlm_get_lock_cookie_node(be64_to_cpu(c)), + dlm_get_lock_cookie_seq(be64_to_cpu(c)), + res->lockname.len, res->lockname.name, + lock->ml.node); + c = ml->cookie; + mlog(ML_ERROR, "Migrate lock cookie %u:%llu, " + "node %u, list %u, flags 0x%x, type %d, " + "conv %d, highest blocked %d\n", + dlm_get_lock_cookie_node(be64_to_cpu(c)), + dlm_get_lock_cookie_seq(be64_to_cpu(c)), + ml->node, ml->list, ml->flags, ml->type, + ml->convert_type, ml->highest_blocked); __dlm_print_one_lock_resource(res); BUG(); } - BUG_ON(lock->ml.node != ml->node); if (tmpq != queue) { - mlog(0, "lock was on %u instead of %u for %.*s\n", - j, ml->list, res->lockname.len, res->lockname.name); + c = ml->cookie; + mlog(0, "Lock cookie %u:%llu was on list %u " + "instead of list %u for %.*s\n", + dlm_get_lock_cookie_node(be64_to_cpu(c)), + dlm_get_lock_cookie_seq(be64_to_cpu(c)), + j, ml->list, res->lockname.len, + res->lockname.name); + __dlm_print_one_lock_resource(res); spin_unlock(&res->spinlock); continue; } @@ -1906,7 +1936,7 @@ skip_lvb: spin_lock(&res->spinlock); list_for_each_entry(lock, queue, list) { if (lock->ml.cookie == ml->cookie) { - __be64 c = lock->ml.cookie; + c = lock->ml.cookie; mlog(ML_ERROR, "%s:%.*s: %u:%llu: lock already " "exists on this lockres!\n", dlm->name, res->lockname.len, res->lockname.name, -- cgit v0.10.2 From de3f440f8c9922afe8770dd16c84f1c87d779b59 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 14 Jan 2010 13:18:02 -0800 Subject: drm/i915: handle non-flip pending case when unpinning the scanout buffer The first page flip queued will replace the current front buffer, which should have a 0 pending flip count. So at finish time we need to handle that case (i.e. if the flip count is 0 *or* dec_and_test is 0 we need to wake the waiters). Also fix up an error path in the queue function and add some debug output (only enabled with driver debugging). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2cc489b..5f14dfb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3985,6 +3985,12 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { + if (work && !work->pending) { + obj_priv = work->obj->driver_private; + DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n", + obj_priv, + atomic_read(&obj_priv->pending_flip)); + } spin_unlock_irqrestore(&dev->event_lock, flags); return; } @@ -4006,7 +4012,10 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev->event_lock, flags); obj_priv = work->obj->driver_private; - if (atomic_dec_and_test(&obj_priv->pending_flip)) + + /* Initial scanout buffer will have a 0 pending flip count */ + if ((atomic_read(&obj_priv->pending_flip) == 0) || + atomic_dec_and_test(&obj_priv->pending_flip)) DRM_WAKEUP(&dev_priv->pending_flip_queue); schedule_work(&work->work); } @@ -4019,8 +4028,11 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); - if (intel_crtc->unpin_work) + if (intel_crtc->unpin_work) { intel_crtc->unpin_work->pending = 1; + } else { + DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); + } spin_unlock_irqrestore(&dev->event_lock, flags); } @@ -4054,6 +4066,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { + DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); mutex_unlock(&dev->struct_mutex); @@ -4067,7 +4080,10 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, ret = intel_pin_and_fence_fb_obj(dev, obj); if (ret != 0) { + DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n", + obj->driver_private); kfree(work); + intel_crtc->unpin_work = NULL; mutex_unlock(&dev->struct_mutex); return ret; } -- cgit v0.10.2 From 6abce7711fcbd72b42f0c9632c1beccf4e674663 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Jan 2010 04:16:49 -0800 Subject: sparc64: Fix UP build. Can't reference irq_desc[].affinity when !SMP. Reported-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index f2179cc..e1cbdb9 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -268,10 +268,8 @@ static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) return cpuid; } #else -static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) -{ - return real_hard_smp_processor_id(); -} +#define irq_choose_cpu(virt_irq, affinity) \ + real_hard_smp_processor_id() #endif static void sun4u_irq_enable(unsigned int virt_irq) -- cgit v0.10.2 From c92b544bd5d8e7ed7d81c77bbecab6df2a95aa53 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 26 Jan 2010 02:40:38 +0000 Subject: ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure The commit 0b5ccb2(title:ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery) has broken the saddr&&daddr member of nf_ct_frag6_queue when creating new queue. And then hash value generated by nf_hashfn() was not equal with that generated by fq_find(). So, a new received fragment can't be inserted to right queue. The patch fixes the bug with adding member of user to nf_ct_frag6_queue structure. Signed-off-by: Shan Wei Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 312c20a..624a548 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -63,6 +63,7 @@ struct nf_ct_frag6_queue struct inet_frag_queue q; __be32 id; /* fragment id */ + u32 user; struct in6_addr saddr; struct in6_addr daddr; -- cgit v0.10.2 From 7b7422a566aa0dc1e582ce263d4c7ff4a772700a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Jan 2010 12:51:10 +0100 Subject: clocksource: Prevent potential kgdb dead lock commit 0f8e8ef7 (clocksource: Simplify clocksource watchdog resume logic) introduced a potential kgdb dead lock. When the kernel is stopped by kgdb inside code which holds watchdog_lock then kgdb dead locks in clocksource_resume_watchdog(). clocksource_resume_watchdog() is called from kbdg via clocksource_touch_watchdog() to avoid that the clock source watchdog marks TSC unstable after the kernel has been stopped. Solve this by replacing spin_lock with a spin_trylock and just return in case the lock is held. Not resetting the watchdog might result in TSC becoming marked unstable, but that's an acceptable penalty for using kgdb. The timekeeping is anyway easily screwed up by kgdb when the system uses either jiffies or a clock source which wraps in short intervals (e.g. pm_timer wraps about every 4.6s), so we really do not have to worry about that occasional TSC marked unstable side effect. The second caller of clocksource_resume_watchdog() is clocksource_resume(). The trylock is safe here as well because the system is UP at this point, interrupts are disabled and nothing else can hold watchdog_lock(). Reported-by: Jason Wessel LKML-Reference: <1264480000-6997-4-git-send-email-jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: Martin Schwidefsky Cc: John Stultz Cc: Andrew Morton Signed-off-by: Thomas Gleixner diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index e85c234..1370083 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -343,7 +343,19 @@ static void clocksource_resume_watchdog(void) { unsigned long flags; - spin_lock_irqsave(&watchdog_lock, flags); + /* + * We use trylock here to avoid a potential dead lock when + * kgdb calls this code after the kernel has been stopped with + * watchdog_lock held. When watchdog_lock is held we just + * return and accept, that the watchdog might trigger and mark + * the monitored clock source (usually TSC) unstable. + * + * This does not affect the other caller clocksource_resume() + * because at this point the kernel is UP, interrupts are + * disabled and nothing can hold watchdog_lock. + */ + if (!spin_trylock_irqsave(&watchdog_lock, flags)) + return; clocksource_reset_watchdog(); spin_unlock_irqrestore(&watchdog_lock, flags); } @@ -458,8 +470,8 @@ void clocksource_resume(void) * clocksource_touch_watchdog - Update watchdog * * Update the watchdog after exception contexts such as kgdb so as not - * to incorrectly trip the watchdog. - * + * to incorrectly trip the watchdog. This might fail when the kernel + * was stopped in code which holds watchdog_lock. */ void clocksource_touch_watchdog(void) { -- cgit v0.10.2 From e578756c35859a459d78d8416195bc5f5ff897d0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Jan 2010 17:04:02 +0100 Subject: netfilter: ctnetlink: fix expectation mask dump The protocol number is not initialized, so userspace can't interpret the layer 4 data properly. Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 59d8064..42f21c0 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1437,8 +1437,9 @@ ctnetlink_exp_dump_mask(struct sk_buff *skb, struct nlattr *nest_parms; memset(&m, 0xFF, sizeof(m)); - m.src.u.all = mask->src.u.all; memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3)); + m.src.u.all = mask->src.u.all; + m.dst.protonum = tuple->dst.protonum; nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED); if (!nest_parms) -- cgit v0.10.2 From 3092ad054406f069991ca561adc74f2d9fbb6867 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Tue, 26 Jan 2010 15:58:57 +0800 Subject: mac80211: fix NULL pointer dereference when ftrace is enabled I got below kernel oops when I try to bring down the network interface if ftrace is enabled. The root cause is drv_ampdu_action() is passed with a NULL ssn pointer in the BA session tear down case. We need to check and avoid dereferencing it in trace entry assignment. BUG: unable to handle kernel NULL pointer dereference Modules linked in: at (null) IP: [] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [...] Call Trace: [] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211] [] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211] [] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211] [] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211] [] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211] [] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211] [] ? ieee80211_deauth+0x1b/0x20 [mac80211] [] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211] [] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211] Cc: Johannes Berg Cc: stable@kernel.org Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index ee94ea0..da8497e 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -680,7 +680,7 @@ TRACE_EVENT(drv_ampdu_action, __entry->ret = ret; __entry->action = action; __entry->tid = tid; - __entry->ssn = *ssn; + __entry->ssn = ssn ? *ssn : 0; ), TP_printk( -- cgit v0.10.2 From 9611a9b6f6de95c290efc697a3e1d0530878c047 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 22 Jan 2010 08:46:13 +0100 Subject: i.MX25: Allow secondary clocks in DEFINE_CLOCK Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 6e838b8..fbe42d2 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -144,7 +144,7 @@ static void clk_cgcr_disable(struct clk *clk) __raw_writel(reg, clk->enable_reg); } -#define DEFINE_CLOCK(name, i, er, es, gr, sr) \ +#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \ static struct clk name = { \ .id = i, \ .enable_reg = CRM_BASE + er, \ @@ -153,27 +153,28 @@ static void clk_cgcr_disable(struct clk *clk) .set_rate = sr, \ .enable = clk_cgcr_enable, \ .disable = clk_cgcr_disable, \ + .secondary = s, \ } -DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL); -DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL); -DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL); -DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL); -DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL); -DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL); -DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); -DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); -DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); -DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL); +DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL); +DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL); +DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ -- cgit v0.10.2 From 4cd3f96cd4014419a4ea524d840be0fa39e3ddbc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 22 Jan 2010 08:47:06 +0100 Subject: i.MX25: implement secondary clocks for uarts and fec For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index fbe42d2..3be51dd 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -157,14 +157,16 @@ static void clk_cgcr_disable(struct clk *clk) } DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(fec_ipg_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL); DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL); DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL); @@ -174,7 +176,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, &fec_ipg_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ -- cgit v0.10.2 From fadc095622dd188cae88eb2f3ff28fd6e9d2d2f1 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:19 +0200 Subject: mx25: remove unused mx25_clocks_init() argument The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 3be51dd..abd303b 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -211,7 +211,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fec.0", NULL, fec_clk) }; -int __init mx25_clocks_init(unsigned long fref) +int __init mx25_clocks_init(void) { int i; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 921bc99..6f06089 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -91,7 +91,7 @@ static void __init mx25pdk_init(void) static void __init mx25pdk_timer_init(void) { - mx25_clocks_init(26000000); + mx25_clocks_init(); } static struct sys_timer mx25pdk_timer = { diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 286cb9b..4bf1068 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,7 +32,7 @@ extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); -extern int mx25_clocks_init(unsigned long fref); +extern int mx25_clocks_init(void); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); -- cgit v0.10.2 From 828df43f139c7fbf0d505c7b9a666d321a0f2c25 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:20 +0200 Subject: mx25: properly initialize clocks This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index abd303b..08aaa38 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -218,6 +218,14 @@ int __init mx25_clocks_init(void) for (i = 0; i < ARRAY_SIZE(lookups); i++) clkdev_add(&lookups[i]); + /* Turn off all clocks except the ones we need to survive, namely: + * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM, + * SCC + */ + __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0); + __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1); + __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; -- cgit v0.10.2 From faed40665d2d81b7e0e537d14ef680ab3da9f22d Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:21 +0200 Subject: mx25: fix time accounting The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 08aaa38..c003ac4 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk) return get_rate_per(8); } +static unsigned long get_rate_gpt(struct clk *clk) +{ + return get_rate_per(5); +} + static unsigned long get_rate_otg(struct clk *clk) { return 48000000; /* FIXME */ @@ -156,7 +161,7 @@ static void clk_cgcr_disable(struct clk *clk) .secondary = s, \ } -DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL); DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); -- cgit v0.10.2 From 1c5740237428ca025a30f53c5615edd11201c17b Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:22 +0200 Subject: mx25: make the FEC AHB clk secondary of the IPG This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index c003ac4..6acc88b 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -166,7 +166,7 @@ DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); -DEFINE_CLOCK(fec_ipg_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); @@ -181,7 +181,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, &fec_ipg_clk); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ -- cgit v0.10.2 From e300839da40e99581581c5d053a95a172651fec8 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 14:47:02 +0100 Subject: firewire: core: add_descriptor size check Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 7083bcc..5045156 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -57,6 +57,8 @@ static LIST_HEAD(descriptor_list); static int descriptor_count; static __be32 tmp_config_rom[256]; +/* ROM header, bus info block, root dir header, capabilities = 7 quadlets */ +static size_t config_rom_length = 1 + 4 + 1 + 1; #define BIB_CRC(v) ((v) << 0) #define BIB_CRC_LENGTH(v) ((v) << 16) @@ -73,7 +75,7 @@ static __be32 tmp_config_rom[256]; #define BIB_CMC ((1) << 30) #define BIB_IMC ((1) << 31) -static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom) +static void generate_config_rom(struct fw_card *card, __be32 *config_rom) { struct fw_descriptor *desc; int i, j, k, length; @@ -130,23 +132,30 @@ static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom) for (i = 0; i < j; i += length + 1) length = fw_compute_block_crc(config_rom + i); - return j; + WARN_ON(j != config_rom_length); } static void update_config_roms(void) { struct fw_card *card; - size_t length; list_for_each_entry (card, &card_list, link) { - length = generate_config_rom(card, tmp_config_rom); - card->driver->set_config_rom(card, tmp_config_rom, length); + generate_config_rom(card, tmp_config_rom); + card->driver->set_config_rom(card, tmp_config_rom, + config_rom_length); } } +static size_t required_space(struct fw_descriptor *desc) +{ + /* descriptor + entry into root dir + optional immediate entry */ + return desc->length + 1 + (desc->immediate > 0 ? 1 : 0); +} + int fw_core_add_descriptor(struct fw_descriptor *desc) { size_t i; + int ret; /* * Check descriptor is valid; the length of all blocks in the @@ -162,15 +171,21 @@ int fw_core_add_descriptor(struct fw_descriptor *desc) mutex_lock(&card_mutex); - list_add_tail(&desc->link, &descriptor_list); - descriptor_count++; - if (desc->immediate > 0) + if (config_rom_length + required_space(desc) > 256) { + ret = -EBUSY; + } else { + list_add_tail(&desc->link, &descriptor_list); + config_rom_length += required_space(desc); descriptor_count++; - update_config_roms(); + if (desc->immediate > 0) + descriptor_count++; + update_config_roms(); + ret = 0; + } mutex_unlock(&card_mutex); - return 0; + return ret; } EXPORT_SYMBOL(fw_core_add_descriptor); @@ -179,6 +194,7 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc) mutex_lock(&card_mutex); list_del(&desc->link); + config_rom_length -= required_space(desc); descriptor_count--; if (desc->immediate > 0) descriptor_count--; @@ -428,7 +444,6 @@ EXPORT_SYMBOL(fw_card_initialize); int fw_card_add(struct fw_card *card, u32 max_receive, u32 link_speed, u64 guid) { - size_t length; int ret; card->max_receive = max_receive; @@ -437,8 +452,8 @@ int fw_card_add(struct fw_card *card, mutex_lock(&card_mutex); - length = generate_config_rom(card, tmp_config_rom); - ret = card->driver->enable(card, tmp_config_rom, length); + generate_config_rom(card, tmp_config_rom); + ret = card->driver->enable(card, tmp_config_rom, config_rom_length); if (ret == 0) list_add_tail(&card->link, &card_list); -- cgit v0.10.2 From 6d3faf6f431bafb25f4b9926c50a7e5c267738c6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 14:48:00 +0100 Subject: firewire: cdev: add_descriptor documentation fix struct fw_cdev_add_descriptor.length is in quadlets, not in bytes. Also remove any doubts about the endianess of descriptor data. Signed-off-by: Stefan Richter diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 1f716d9..520ecf8 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -380,7 +380,7 @@ struct fw_cdev_initiate_bus_reset { * @immediate: If non-zero, immediate key to insert before pointer * @key: Upper 8 bits of root directory pointer * @data: Userspace pointer to contents of descriptor block - * @length: Length of descriptor block data, in bytes + * @length: Length of descriptor block data, in quadlets * @handle: Handle to the descriptor, written by the kernel * * Add a descriptor block and optionally a preceding immediate key to the local @@ -394,6 +394,8 @@ struct fw_cdev_initiate_bus_reset { * If not 0, the @immediate field specifies an immediate key which will be * inserted before the root directory pointer. * + * @immediate, @key, and @data array elements are CPU-endian quadlets. + * * If successful, the kernel adds the descriptor and writes back a handle to the * kernel-side object to be used for later removal of the descriptor block and * immediate key. -- cgit v0.10.2 From 281e20323ab72180137824a298ee9e21e6f9acf6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 16:45:03 +0100 Subject: firewire: core: fix use-after-free regression in FCP handler Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index e6d63849..4eeaed5 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -595,13 +596,20 @@ static int ioctl_send_request(struct client *client, void *buffer) client->device->max_speed); } +static inline bool is_fcp_request(struct fw_request *request) +{ + return request == NULL; +} + static void release_request(struct client *client, struct client_resource *resource) { struct inbound_transaction_resource *r = container_of(resource, struct inbound_transaction_resource, resource); - if (r->request) + if (is_fcp_request(r->request)) + kfree(r->data); + else fw_send_response(client->device->card, r->request, RCODE_CONFLICT_ERROR); kfree(r); @@ -616,6 +624,7 @@ static void handle_request(struct fw_card *card, struct fw_request *request, struct address_handler_resource *handler = callback_data; struct inbound_transaction_resource *r; struct inbound_transaction_event *e; + void *fcp_frame = NULL; int ret; r = kmalloc(sizeof(*r), GFP_ATOMIC); @@ -627,6 +636,18 @@ static void handle_request(struct fw_card *card, struct fw_request *request, r->data = payload; r->length = length; + if (is_fcp_request(request)) { + /* + * FIXME: Let core-transaction.c manage a + * single reference-counted copy? + */ + fcp_frame = kmemdup(payload, length, GFP_ATOMIC); + if (fcp_frame == NULL) + goto failed; + + r->data = fcp_frame; + } + r->resource.release = release_request; ret = add_client_resource(handler->client, &r->resource, GFP_ATOMIC); if (ret < 0) @@ -640,13 +661,15 @@ static void handle_request(struct fw_card *card, struct fw_request *request, e->request.closure = handler->closure; queue_event(handler->client, &e->event, - &e->request, sizeof(e->request), payload, length); + &e->request, sizeof(e->request), r->data, length); return; failed: kfree(r); kfree(e); - if (request) + kfree(fcp_frame); + + if (!is_fcp_request(request)) fw_send_response(card, request, RCODE_CONFLICT_ERROR); } @@ -717,18 +740,17 @@ static int ioctl_send_response(struct client *client, void *buffer) r = container_of(resource, struct inbound_transaction_resource, resource); - if (r->request) { - if (request->length < r->length) - r->length = request->length; - if (copy_from_user(r->data, u64_to_uptr(request->data), - r->length)) { - ret = -EFAULT; - kfree(r->request); - goto out; - } - fw_send_response(client->device->card, r->request, - request->rcode); + if (is_fcp_request(r->request)) + goto out; + + if (request->length < r->length) + r->length = request->length; + if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) { + ret = -EFAULT; + kfree(r->request); + goto out; } + fw_send_response(client->device->card, r->request, request->rcode); out: kfree(r); -- cgit v0.10.2 From c9edda7140ec6a22accf7f2f86da362dfbfd41fc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:41:34 -0500 Subject: NFS: Fix a reference leak in nfs_wb_cancel_page() Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever diff --git a/fs/nfs/write.c b/fs/nfs/write.c index d171696..dac8d76 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1541,6 +1541,7 @@ int nfs_wb_page_cancel(struct inode *inode, struct page *page) break; } ret = nfs_wait_on_request(req); + nfs_release_request(req); if (ret < 0) goto out; } -- cgit v0.10.2 From 82be934a59ff891cac598727e5a862ba2b9d1fac Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:41:53 -0500 Subject: NFS: Try to commit unstable writes in nfs_release_page() If someone calls nfs_release_page(), we presumably already know that the page is clean, however it may be holding an unstable write. Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6b89132..63f2071 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -486,6 +486,8 @@ static int nfs_release_page(struct page *page, gfp_t gfp) { dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page); + if (gfp & __GFP_WAIT) + nfs_wb_page(page->mapping->host, page); /* If PagePrivate() is set, then the page is not freeable */ if (PagePrivate(page)) return 0; -- cgit v0.10.2 From 0aa05887af728b058af91197f0ae9b3ae63dd74a Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 26 Jan 2010 15:42:03 -0500 Subject: NFS: Make nfs_commitdata_release static The symbol nfs_commitdata_release is only used locally in this file. Make it static to prevent the following sparse warning: warning: symbol 'nfs_commitdata_release' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten Cc: Trond Myklebust Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever diff --git a/fs/nfs/write.c b/fs/nfs/write.c index dac8d76..7b54b8b 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1233,7 +1233,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data) #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) -void nfs_commitdata_release(void *data) +static void nfs_commitdata_release(void *data) { struct nfs_write_data *wdata = data; -- cgit v0.10.2 From b0706ca415b188ed58788420de4d5c9972b2afb2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 26 Jan 2010 15:42:11 -0500 Subject: NFS: Avoid warnings when CONFIG_NFS_V4=n Avoid the following warnings when CONFIG_NFS_V4=n: fs/nfs/sysctl.c:19: warning: unused variable `nfs_set_port_max' fs/nfs/sysctl.c:18: warning: unused variable `nfs_set_port_min' by making those variables contingent on NFSv4 being configured. Signed-off-by: David Howells Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c index 70e1fbb..ad4d2e7 100644 --- a/fs/nfs/sysctl.c +++ b/fs/nfs/sysctl.c @@ -15,8 +15,10 @@ #include "callback.h" +#ifdef CONFIG_NFS_V4 static const int nfs_set_port_min = 0; static const int nfs_set_port_max = 65535; +#endif static struct ctl_table_header *nfs_callback_sysctl_table; static ctl_table nfs_cb_sysctls[] = { -- cgit v0.10.2 From 2bee72a6aa1e6d0a4f5da56217f0d0bbbdd0d9a3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:21 -0500 Subject: NFSv4: Ensure that the NFSv4 locking can recover from stateid errors In most cases, we just want to mark the lock_stateid sequence id as being uninitialised. Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 198d51d..0b68238 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4088,6 +4088,22 @@ static const struct rpc_call_ops nfs4_recover_lock_ops = { .rpc_release = nfs4_lock_release, }; +static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_state *lsp, int new_lock_owner, int error) +{ + struct nfs_client *clp = server->nfs_client; + struct nfs4_state *state = lsp->ls_state; + + switch (error) { + case -NFS4ERR_ADMIN_REVOKED: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_EXPIRED: + if (new_lock_owner != 0 || + (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) + nfs4_state_mark_reclaim_nograce(clp, state); + lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; + }; +} + static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *fl, int recovery_type) { struct nfs4_lockdata *data; @@ -4126,6 +4142,9 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f ret = nfs4_wait_for_completion_rpc_task(task); if (ret == 0) { ret = data->rpc_status; + if (ret) + nfs4_handle_setlk_error(data->server, data->lsp, + data->arg.new_lock_owner, ret); } else data->cancelled = 1; rpc_put_task(task); -- cgit v0.10.2 From 8e469ebd6dc32cbaf620e134d79f740bf0ebab79 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:30 -0500 Subject: NFSv4: Don't allow posix locking against servers that don't support it Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 865265b..ea2f41b 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -146,6 +146,7 @@ enum { NFS_O_RDWR_STATE, /* OPEN stateid has read/write state */ NFS_STATE_RECLAIM_REBOOT, /* OPEN stateid server rebooted */ NFS_STATE_RECLAIM_NOGRACE, /* OPEN stateid needs to recover state */ + NFS_STATE_POSIX_LOCKS, /* Posix locks are supported */ }; struct nfs4_state { diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 0b68238..be044b5 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1658,6 +1658,8 @@ static int _nfs4_do_open(struct inode *dir, struct path *path, fmode_t fmode, in status = PTR_ERR(state); if (IS_ERR(state)) goto err_opendata_put; + if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0) + set_bit(NFS_STATE_POSIX_LOCKS, &state->flags); nfs4_opendata_put(opendata); nfs4_put_state_owner(sp); *res = state; @@ -4200,8 +4202,11 @@ static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock { struct nfs_inode *nfsi = NFS_I(state->inode); unsigned char fl_flags = request->fl_flags; - int status; + int status = -ENOLCK; + if ((fl_flags & FL_POSIX) && + !test_bit(NFS_STATE_POSIX_LOCKS, &state->flags)) + goto out; /* Is this a delegated open? */ status = nfs4_set_lock_state(state, request); if (status != 0) -- cgit v0.10.2 From 03391693a95900875b0973569d2d73ff3aa8972e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:38 -0500 Subject: NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily Currently, nfs4_handle_exception() will call it twice if called with an error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or -NFS4ERR_EXPIRED. Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index be044b5..afbfe67 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -256,12 +256,8 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, ret = nfs4_wait_clnt_recover(clp); if (ret == 0) exception->retry = 1; -#if !defined(CONFIG_NFS_V4_1) break; -#else /* !defined(CONFIG_NFS_V4_1) */ - if (!nfs4_has_session(server->nfs_client)) - break; - /* FALLTHROUGH */ +#if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: case -NFS4ERR_BAD_HIGH_SLOT: @@ -274,7 +270,7 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, nfs4_schedule_state_recovery(clp); exception->retry = 1; break; -#endif /* !defined(CONFIG_NFS_V4_1) */ +#endif /* defined(CONFIG_NFS_V4_1) */ case -NFS4ERR_FILE_OPEN: if (exception->timeout > HZ) { /* We have retried a decent amount, time to -- cgit v0.10.2 From a2c0b9e291208f65221a0ad8a0c80a377707d480 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:47 -0500 Subject: NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index ea2f41b..0c6fda3 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -278,6 +278,7 @@ extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t); extern void nfs4_schedule_state_recovery(struct nfs_client *); extern void nfs4_schedule_state_manager(struct nfs_client *); extern int nfs4_state_mark_reclaim_nograce(struct nfs_client *clp, struct nfs4_state *state); +extern int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state); extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags); extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp); extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index afbfe67..375f0fa 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -249,14 +249,14 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, if (state == NULL) break; nfs4_state_mark_reclaim_nograce(clp, state); - case -NFS4ERR_STALE_CLIENTID: + goto do_state_recovery; case -NFS4ERR_STALE_STATEID: + if (state == NULL) + break; + nfs4_state_mark_reclaim_reboot(clp, state); + case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_EXPIRED: - nfs4_schedule_state_recovery(clp); - ret = nfs4_wait_clnt_recover(clp); - if (ret == 0) - exception->retry = 1; - break; + goto do_state_recovery; #if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: @@ -289,6 +289,12 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, } /* We failed to handle the error */ return nfs4_map_errors(ret); +do_state_recovery: + nfs4_schedule_state_recovery(clp); + ret = nfs4_wait_clnt_recover(clp); + if (ret == 0) + exception->retry = 1; + return ret; } @@ -3420,15 +3426,14 @@ _nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, if (state == NULL) break; nfs4_state_mark_reclaim_nograce(clp, state); - case -NFS4ERR_STALE_CLIENTID: + goto do_state_recovery; case -NFS4ERR_STALE_STATEID: + if (state == NULL) + break; + nfs4_state_mark_reclaim_reboot(clp, state); + case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_EXPIRED: - rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL); - nfs4_schedule_state_recovery(clp); - if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0) - rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task); - task->tk_status = 0; - return -EAGAIN; + goto do_state_recovery; #if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: @@ -3456,6 +3461,13 @@ _nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, } task->tk_status = nfs4_map_errors(task->tk_status); return 0; +do_state_recovery: + rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL); + nfs4_schedule_state_recovery(clp); + if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0) + rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task); + task->tk_status = 0; + return -EAGAIN; } static int @@ -4099,6 +4111,12 @@ static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_ (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) nfs4_state_mark_reclaim_nograce(clp, state); lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; + break; + case -NFS4ERR_STALE_STATEID: + if (new_lock_owner != 0 || + (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) + nfs4_state_mark_reclaim_reboot(clp, state); + lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; }; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 6d263ed..c1e2733 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -901,7 +901,7 @@ void nfs4_schedule_state_recovery(struct nfs_client *clp) nfs4_schedule_state_manager(clp); } -static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) +int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) { set_bit(NFS_STATE_RECLAIM_REBOOT, &state->flags); -- cgit v0.10.2 From 492a74f4210e15f4701422e2e1c4cd3c1e45ddae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 25 Jan 2010 15:17:47 -0500 Subject: ring-buffer: Check if ring buffer iterator has stale data Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index edefe3b..503b630 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -464,6 +464,8 @@ struct ring_buffer_iter { struct ring_buffer_per_cpu *cpu_buffer; unsigned long head; struct buffer_page *head_page; + struct buffer_page *cache_reader_page; + unsigned long cache_read; u64 read_stamp; }; @@ -2716,6 +2718,8 @@ static void rb_iter_reset(struct ring_buffer_iter *iter) iter->read_stamp = cpu_buffer->read_stamp; else iter->read_stamp = iter->head_page->page->time_stamp; + iter->cache_reader_page = cpu_buffer->reader_page; + iter->cache_read = cpu_buffer->read; } /** @@ -3066,6 +3070,15 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) cpu_buffer = iter->cpu_buffer; buffer = cpu_buffer->buffer; + /* + * Check if someone performed a consuming read to + * the buffer. A consuming read invalidates the iterator + * and we need to reset the iterator in this case. + */ + if (unlikely(iter->cache_read != cpu_buffer->read || + iter->cache_reader_page != cpu_buffer->reader_page)) + rb_iter_reset(iter); + again: /* * We repeat when a timestamp is encountered. -- cgit v0.10.2 From 3c05d7482777f15e71bb4cb1ba78dee2800dfec6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 26 Jan 2010 16:14:08 -0500 Subject: ring-buffer: Check for end of page in iterator If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 503b630..8c1b2d2 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3064,9 +3064,6 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) struct ring_buffer_event *event; int nr_loops = 0; - if (ring_buffer_iter_empty(iter)) - return NULL; - cpu_buffer = iter->cpu_buffer; buffer = cpu_buffer->buffer; @@ -3080,6 +3077,9 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) rb_iter_reset(iter); again: + if (ring_buffer_iter_empty(iter)) + return NULL; + /* * We repeat when a timestamp is encountered. * We can get multiple timestamps by nested interrupts or also @@ -3094,6 +3094,11 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) if (rb_per_cpu_empty(cpu_buffer)) return NULL; + if (iter->head >= local_read(&iter->head_page->page->commit)) { + rb_inc_iter(iter); + goto again; + } + event = rb_iter_head_event(iter); switch (event->type_len) { -- cgit v0.10.2 From 6993b1bb1e62367f500789835a1f747e12259f07 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Mon, 25 Jan 2010 11:10:32 +0800 Subject: tracing/documentation: Fix a typo in ftrace.txt 'ftrace' is no longer the name of the function tracer, to activate the function trace 'echo function > current_tracer' is to be used instead of 'echo ftrace > current_tracer'. Update the documentation to reflect the current implementation. Signed-off-by: Yang Hongyang LKML-Reference: <4B5D0BA8.20106@cn.fujitsu.com> Signed-off-by: Steven Rostedt diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 8179692..bab3040 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt: # echo sys_nanosleep hrtimer_interrupt \ > set_ftrace_filter - # echo ftrace > current_tracer + # echo function > current_tracer # echo 1 > tracing_enabled # usleep 1 # echo 0 > tracing_enabled -- cgit v0.10.2 From 03688970347bfea32823953a7ce5886d1713205f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Jan 2010 08:12:47 -0500 Subject: tracing/documentation: Cover new frame pointer semantics Update the graph tracer examples to cover the new frame pointer semantics (in terms of passing it along). Move the HAVE_FUNCTION_GRAPH_FP_TEST docs out of the Kconfig, into the right place, and expand on the details. Signed-off-by: Mike Frysinger LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt index 239f14b..6a5a579 100644 --- a/Documentation/trace/ftrace-design.txt +++ b/Documentation/trace/ftrace-design.txt @@ -1,5 +1,6 @@ function tracer guts ==================== + By Mike Frysinger Introduction ------------ @@ -173,14 +174,16 @@ void ftrace_graph_caller(void) unsigned long *frompc = &...; unsigned long selfpc = - MCOUNT_INSN_SIZE; - prepare_ftrace_return(frompc, selfpc); + /* passing frame pointer up is optional -- see below */ + prepare_ftrace_return(frompc, selfpc, frame_pointer); /* restore all state needed by the ABI */ } #endif -For information on how to implement prepare_ftrace_return(), simply look at -the x86 version. The only architecture-specific piece in it is the setup of +For information on how to implement prepare_ftrace_return(), simply look at the +x86 version (the frame pointer passing is optional; see the next section for +more information). The only architecture-specific piece in it is the setup of the fault recovery table (the asm(...) code). The rest should be the same across architectures. @@ -205,6 +208,23 @@ void return_to_handler(void) #endif +HAVE_FUNCTION_GRAPH_FP_TEST +--------------------------- + +An arch may pass in a unique value (frame pointer) to both the entering and +exiting of a function. On exit, the value is compared and if it does not +match, then it will panic the kernel. This is largely a sanity check for bad +code generation with gcc. If gcc for your port sanely updates the frame +pointer under different opitmization levels, then ignore this option. + +However, adding support for it isn't terribly difficult. In your assembly code +that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument. +Then in the C version of that function, do what the x86 port does and pass it +along to ftrace_push_return_trace() instead of a stub value of 0. + +Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer. + + HAVE_FTRACE_NMI_ENTER --------------------- diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 6c22d8a..60e2ce0 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -27,9 +27,7 @@ config HAVE_FUNCTION_GRAPH_TRACER config HAVE_FUNCTION_GRAPH_FP_TEST bool help - An arch may pass in a unique value (frame pointer) to both the - entering and exiting of a function. On exit, the value is compared - and if it does not match, then it will panic the kernel. + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_TRACE_MCOUNT_TEST bool -- cgit v0.10.2 From afc70ed05a07bfe171f7a5b8fdc80bdb073d314f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Jan 2010 23:38:27 -0500 Subject: Fix a leak in affs_fill_super() Signed-off-by: Al Viro diff --git a/fs/affs/super.c b/fs/affs/super.c index 104fdcb..b2a5958 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -316,6 +316,8 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent) &blocksize,&sbi->s_prefix, sbi->s_volume, &mount_flags)) { printk(KERN_ERR "AFFS: Error parsing options\n"); + kfree(sbi->s_prefix); + kfree(sbi); return -EINVAL; } /* N.B. after this point s_prefix must be released */ -- cgit v0.10.2 From 29333920a5a46edcc9b728e2cf0134d5a9b516ee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:04:07 -0500 Subject: Fix remount races with symlink handling in affs A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: Al Viro diff --git a/fs/affs/affs.h b/fs/affs/affs.h index e511dc6..0e40caa 100644 --- a/fs/affs/affs.h +++ b/fs/affs/affs.h @@ -106,8 +106,8 @@ struct affs_sb_info { u32 s_last_bmap; struct buffer_head *s_bmap_bh; char *s_prefix; /* Prefix for volumes and assigns. */ - int s_prefix_len; /* Length of prefix. */ char s_volume[32]; /* Volume prefix for absolute symlinks. */ + spinlock_t symlink_lock; /* protects the previous two */ }; #define SF_INTL 0x0001 /* International filesystem. */ diff --git a/fs/affs/namei.c b/fs/affs/namei.c index 960d336..d70bbba 100644 --- a/fs/affs/namei.c +++ b/fs/affs/namei.c @@ -341,10 +341,13 @@ affs_symlink(struct inode *dir, struct dentry *dentry, const char *symname) p = (char *)AFFS_HEAD(bh)->table; lc = '/'; if (*symname == '/') { + struct affs_sb_info *sbi = AFFS_SB(sb); while (*symname == '/') symname++; - while (AFFS_SB(sb)->s_volume[i]) /* Cannot overflow */ - *p++ = AFFS_SB(sb)->s_volume[i++]; + spin_lock(&sbi->symlink_lock); + while (sbi->s_volume[i]) /* Cannot overflow */ + *p++ = sbi->s_volume[i++]; + spin_unlock(&sbi->symlink_lock); } while (i < maxlen && (c = *symname++)) { if (c == '.' && lc == '/' && *symname == '.' && symname[1] == '/') { diff --git a/fs/affs/super.c b/fs/affs/super.c index b2a5958..be6a6e8 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -221,8 +221,6 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s *mount_opts |= SF_MUFS; break; case Opt_prefix: - /* Free any previous prefix */ - kfree(*prefix); *prefix = match_strdup(&args[0]); if (!*prefix) return 0; @@ -311,6 +309,7 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; sb->s_fs_info = sbi; mutex_init(&sbi->s_bmlock); + spin_lock_init(&sbi->symlink_lock); if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block, &blocksize,&sbi->s_prefix, @@ -518,14 +517,18 @@ affs_remount(struct super_block *sb, int *flags, char *data) unsigned long mount_flags; int res = 0; char *new_opts = kstrdup(data, GFP_KERNEL); + char volume[32]; + char *prefix = NULL; pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data); *flags |= MS_NODIRATIME; + memcpy(volume, sbi->s_volume, 32); if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block, - &blocksize, &sbi->s_prefix, sbi->s_volume, + &blocksize, &prefix, volume, &mount_flags)) { + kfree(prefix); kfree(new_opts); return -EINVAL; } @@ -536,6 +539,14 @@ affs_remount(struct super_block *sb, int *flags, char *data) sbi->s_mode = mode; sbi->s_uid = uid; sbi->s_gid = gid; + /* protect against readers */ + spin_lock(&sbi->symlink_lock); + if (prefix) { + kfree(sbi->s_prefix); + sbi->s_prefix = prefix; + } + memcpy(sbi->s_volume, volume, 32); + spin_unlock(&sbi->symlink_lock); if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) { unlock_kernel(); diff --git a/fs/affs/symlink.c b/fs/affs/symlink.c index 4178253..ee00f08 100644 --- a/fs/affs/symlink.c +++ b/fs/affs/symlink.c @@ -20,7 +20,6 @@ static int affs_symlink_readpage(struct file *file, struct page *page) int i, j; char c; char lc; - char *pf; pr_debug("AFFS: follow_link(ino=%lu)\n",inode->i_ino); @@ -32,11 +31,15 @@ static int affs_symlink_readpage(struct file *file, struct page *page) j = 0; lf = (struct slink_front *)bh->b_data; lc = 0; - pf = AFFS_SB(inode->i_sb)->s_prefix ? AFFS_SB(inode->i_sb)->s_prefix : "/"; if (strchr(lf->symname,':')) { /* Handle assign or volume name */ + struct affs_sb_info *sbi = AFFS_SB(inode->i_sb); + char *pf; + spin_lock(&sbi->symlink_lock); + pf = sbi->s_prefix ? sbi->s_prefix : "/"; while (i < 1023 && (c = pf[i])) link[i++] = c; + spin_unlock(&sbi->symlink_lock); while (i < 1023 && lf->symname[j] != ':') link[i++] = lf->symname[j++]; if (i < 1023) -- cgit v0.10.2 From 217686e98321a4ff4c1a6cc535e511e37c5d2dbf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:06:22 -0500 Subject: fix affs parse_options() Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: Al Viro diff --git a/fs/affs/super.c b/fs/affs/super.c index be6a6e8..d41e967 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -203,7 +203,7 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s switch (token) { case Opt_bs: if (match_int(&args[0], &n)) - return -EINVAL; + return 0; if (n != 512 && n != 1024 && n != 2048 && n != 4096) { printk ("AFFS: Invalid blocksize (512, 1024, 2048, 4096 allowed)\n"); @@ -213,7 +213,7 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s break; case Opt_mode: if (match_octal(&args[0], &option)) - return 1; + return 0; *mode = option & 0777; *mount_opts |= SF_SETMODE; break; @@ -231,21 +231,21 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s break; case Opt_reserved: if (match_int(&args[0], reserved)) - return 1; + return 0; break; case Opt_root: if (match_int(&args[0], root)) - return 1; + return 0; break; case Opt_setgid: if (match_int(&args[0], &option)) - return 1; + return 0; *gid = option; *mount_opts |= SF_SETGID; break; case Opt_setuid: if (match_int(&args[0], &option)) - return -EINVAL; + return 0; *uid = option; *mount_opts |= SF_SETUID; break; -- cgit v0.10.2 From 5998649f779b7148a8a0c10c46cfa99e27d34dfe Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:52:22 -0500 Subject: Fix failure exits in bfs_fill_super() double iput(), leaks... Signed-off-by: Al Viro diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index 6f60336..8f3d9fd 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -353,35 +353,35 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) struct inode *inode; unsigned i, imap_len; struct bfs_sb_info *info; - long ret = -EINVAL; + int ret = -EINVAL; unsigned long i_sblock, i_eblock, i_eoff, s_size; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; + mutex_init(&info->bfs_lock); s->s_fs_info = info; sb_set_blocksize(s, BFS_BSIZE); - bh = sb_bread(s, 0); - if(!bh) + info->si_sbh = sb_bread(s, 0); + if (!info->si_sbh) goto out; - bfs_sb = (struct bfs_super_block *)bh->b_data; + bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data; if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) { if (!silent) printf("No BFS filesystem on %s (magic=%08x)\n", s->s_id, le32_to_cpu(bfs_sb->s_magic)); - goto out; + goto out1; } if (BFS_UNCLEAN(bfs_sb, s) && !silent) printf("%s is unclean, continuing\n", s->s_id); s->s_magic = BFS_MAGIC; - info->si_sbh = bh; if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) { printf("Superblock is corrupted\n"); - goto out; + goto out1; } info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) / @@ -390,7 +390,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) imap_len = (info->si_lasti / 8) + 1; info->si_imap = kzalloc(imap_len, GFP_KERNEL); if (!info->si_imap) - goto out; + goto out1; for (i = 0; i < BFS_ROOT_INO; i++) set_bit(i, info->si_imap); @@ -398,15 +398,13 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) inode = bfs_iget(s, BFS_ROOT_INO); if (IS_ERR(inode)) { ret = PTR_ERR(inode); - kfree(info->si_imap); - goto out; + goto out2; } s->s_root = d_alloc_root(inode); if (!s->s_root) { iput(inode); ret = -ENOMEM; - kfree(info->si_imap); - goto out; + goto out2; } info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS; @@ -419,10 +417,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) bh = sb_bread(s, info->si_blocks - 1); if (!bh) { printf("Last block not available: %lu\n", info->si_blocks - 1); - iput(inode); ret = -EIO; - kfree(info->si_imap); - goto out; + goto out3; } brelse(bh); @@ -459,11 +455,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) printf("Inode 0x%08x corrupted\n", i); brelse(bh); - s->s_root = NULL; - kfree(info->si_imap); - kfree(info); - s->s_fs_info = NULL; - return -EIO; + ret = -EIO; + goto out3; } if (!di->i_ino) { @@ -483,11 +476,17 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) s->s_dirt = 1; } dump_imap("read_super", s); - mutex_init(&info->bfs_lock); return 0; +out3: + dput(s->s_root); + s->s_root = NULL; +out2: + kfree(info->si_imap); +out1: + brelse(info->si_sbh); out: - brelse(bh); + mutex_destroy(&info->bfs_lock); kfree(info); s->s_fs_info = NULL; return ret; -- cgit v0.10.2 From ef52c75e4b1603f6e6102967ad90118205168eae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 04:50:43 -0500 Subject: get rid of pointless checks after simple_pin_fs() if we'd just got success from it, vfsmount won't be NULL Signed-off-by: Al Viro diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index b486169..274ac86 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -160,15 +160,8 @@ static int debugfs_create_by_name(const char *name, mode_t mode, * block. A pointer to that is in the struct vfsmount that we * have around. */ - if (!parent) { - if (debugfs_mount && debugfs_mount->mnt_sb) { - parent = debugfs_mount->mnt_sb->s_root; - } - } - if (!parent) { - pr_debug("debugfs: Ah! can not find a parent!\n"); - return -EFAULT; - } + if (!parent) + parent = debugfs_mount->mnt_sb->s_root; *dentry = NULL; mutex_lock(&parent->d_inode->i_mutex); diff --git a/security/inode.c b/security/inode.c index f7496c6..c3a7938 100644 --- a/security/inode.c +++ b/security/inode.c @@ -156,15 +156,8 @@ static int create_by_name(const char *name, mode_t mode, * block. A pointer to that is in the struct vfsmount that we * have around. */ - if (!parent ) { - if (mount && mount->mnt_sb) { - parent = mount->mnt_sb->s_root; - } - } - if (!parent) { - pr_debug("securityfs: Ah! can not find a parent!\n"); - return -EFAULT; - } + if (!parent) + parent = mount->mnt_sb->s_root; mutex_lock(&parent->d_inode->i_mutex); *dentry = lookup_one_len(name, parent, strlen(name)); -- cgit v0.10.2 From 7e32b7bb734047c5e3cecf2e896b9cf8fc35d1e8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 06:05:54 -0500 Subject: fix leak in romfs_fill_super() Signed-off-by: Al Viro diff --git a/fs/romfs/super.c b/fs/romfs/super.c index c117fa8..42d2135 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -544,6 +544,7 @@ error: error_rsb_inval: ret = -EINVAL; error_rsb: + kfree(rsb); return ret; } -- cgit v0.10.2 From 083c73c253c23c20359a344dfe1198ea628e6259 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 06:16:19 -0500 Subject: fix oops in fs/9p late mount failure if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: Al Viro diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 14a8644..69357c0 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -188,7 +188,8 @@ static void v9fs_kill_super(struct super_block *s) P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s); - v9fs_dentry_release(s->s_root); /* clunk root */ + if (s->s_root) + v9fs_dentry_release(s->s_root); /* clunk root */ kill_anon_super(s); -- cgit v0.10.2 From 12e9a45609054fb83d4a8b716a5265cc1a393e10 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 18:44:58 -0500 Subject: Fix failure exit in ipathfs deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index b368406..100da85 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -346,10 +346,8 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) { spin_unlock_irqrestore(&ipath_devs_lock, flags); ret = create_device_files(sb, dd); - if (ret) { - deactivate_locked_super(sb); + if (ret) goto bail; - } spin_lock_irqsave(&ipath_devs_lock, flags); } -- cgit v0.10.2 From c928febf4bc703ea542340e5a208e0445d998839 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 26 Jan 2010 18:27:09 +0000 Subject: starfire: clean up properly if firmware loading fails netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in , and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings Reported-by: Michael Moffatt Tested-by: Michael Moffatt Cc: "David S. Miller" Cc: Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 95db60a..f952113 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev) if (retval) { printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", FIRMWARE_RX); - return retval; + goto out_init; } if (fw_rx->size % 4) { printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", @@ -1108,6 +1108,9 @@ out_tx: release_firmware(fw_tx); out_rx: release_firmware(fw_rx); +out_init: + if (retval) + netdev_close(dev); return retval; } -- cgit v0.10.2 From 48d50674179981e41f432167b2441cec782d5484 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 26 Jan 2010 19:16:41 +0100 Subject: lockdep: Fix check_usage_backwards() error message Lockdep has found the real bug, but the output doesn't look right to me: > ========================================================= > [ INFO: possible irq lock inversion dependency detected ] > 2.6.33-rc5 #77 > --------------------------------------------------------- > emacs/1609 just changed the state of lock: > (&(&tty->ctrl_lock)->rlock){+.....}, at: [] tty_fasync+0xe8/0x190 > but this lock took another, HARDIRQ-unsafe lock in the past: > (&(&sighand->siglock)->rlock){-.....} "HARDIRQ-unsafe" and "this lock took another" looks wrong, afaics. > ... key at: [] __key.46539+0x0/0x8 > ... acquired at: > [] __lock_acquire+0x1056/0x15a0 > [] lock_acquire+0x9f/0x120 > [] _raw_spin_lock_irqsave+0x52/0x90 > [] __proc_set_tty+0x3e/0x150 > [] tty_open+0x51d/0x5e0 The stack-trace shows that this lock (ctrl_lock) was taken under ->siglock (which is hopefully irq-safe). This is a clear typo in check_usage_backwards() where we tell the print a fancy routine we're forwards. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100126181641.GA10460@redhat.com> Signed-off-by: Ingo Molnar diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 5feaddc..c62ec14 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2147,7 +2147,7 @@ check_usage_backwards(struct task_struct *curr, struct held_lock *this, return ret; return print_irq_inversion_bug(curr, &root, target_entry, - this, 1, irqclass); + this, 0, irqclass); } void print_irqtrace_events(struct task_struct *curr) -- cgit v0.10.2 From da482474b8396e1a099c37ffc6541b78775aedb4 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 26 Jan 2010 20:37:22 -0600 Subject: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson Signed-off-by: Dean Nelson LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index cb27fd6..83e5e62 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -229,7 +229,7 @@ static void __exit cpuid_exit(void) for_each_online_cpu(cpu) cpuid_device_destroy(cpu); class_destroy(cpuid_class); - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); + __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid"); unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); } diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 4bd93c9..206735a 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -285,7 +285,7 @@ static void __exit msr_exit(void) for_each_online_cpu(cpu) msr_device_destroy(cpu); class_destroy(msr_class); - unregister_chrdev(MSR_MAJOR, "cpu/msr"); + __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr"); unregister_hotcpu_notifier(&msr_class_cpu_notifier); } -- cgit v0.10.2 From 294001a80c9810e2fe27aaaad7df8be12a103065 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Wed, 27 Jan 2010 10:12:35 +0100 Subject: [S390] dasd: fix possible NULL pointer errors Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index fdb2e7c..5905936 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1004,8 +1004,8 @@ static void dasd_handle_killed_request(struct ccw_device *cdev, if (device == NULL || device != dasd_device_from_cdev_locked(cdev) || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { - DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: " - "bus_id %s", dev_name(&cdev->dev)); + DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s", + "invalid device in request"); return; } @@ -1078,8 +1078,8 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, device = (struct dasd_device *) cqr->startdev; if (!device || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { - DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: " - "bus_id %s", dev_name(&cdev->dev)); + DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s", + "invalid device in request"); return; } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 1c500c4..1cca21a 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -3033,7 +3033,7 @@ static void dasd_eckd_dump_sense_ccw(struct dasd_device *device, len += sprintf(page + len, KERN_ERR PRINTK_HEADER " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n", req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw), - scsw_cc(&irb->scsw), req->intrc); + scsw_cc(&irb->scsw), req ? req->intrc : 0); len += sprintf(page + len, KERN_ERR PRINTK_HEADER " device %s: Failing CCW: %p\n", dev_name(&device->cdev->dev), diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index fc7b30b..7039d9c 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -260,7 +260,7 @@ static int dasd_ioctl_information(struct dasd_block *block, struct ccw_dev_id dev_id; base = block->base; - if (!base->discipline->fill_info) + if (!base->discipline || !base->discipline->fill_info) return -EINVAL; dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL); @@ -303,10 +303,7 @@ static int dasd_ioctl_information(struct dasd_block *block, dasd_info->features |= ((base->features & DASD_FEATURE_READONLY) != 0); - if (base->discipline) - memcpy(dasd_info->type, base->discipline->name, 4); - else - memcpy(dasd_info->type, "none", 4); + memcpy(dasd_info->type, base->discipline->name, 4); if (block->request_queue->request_fn) { struct list_head *l; diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 6315fbd..71f95f5 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -72,7 +72,7 @@ dasd_devices_show(struct seq_file *m, void *v) /* Print device number. */ seq_printf(m, "%s", dev_name(&device->cdev->dev)); /* Print discipline string. */ - if (device != NULL && device->discipline != NULL) + if (device->discipline != NULL) seq_printf(m, "(%s)", device->discipline->name); else seq_printf(m, "(none)"); @@ -92,10 +92,7 @@ dasd_devices_show(struct seq_file *m, void *v) substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " "; seq_printf(m, "%4s: ", substr); /* Print device status information. */ - switch ((device != NULL) ? device->state : -1) { - case -1: - seq_printf(m, "unknown"); - break; + switch (device->state) { case DASD_STATE_NEW: seq_printf(m, "new"); break; -- cgit v0.10.2 From 428aecf67cf673d546627b2813bd4acabd20e3a9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 27 Jan 2010 10:12:36 +0100 Subject: [S390] irqflags: add missing types.h include Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h index 3f26131..c2fb432 100644 --- a/arch/s390/include/asm/irqflags.h +++ b/arch/s390/include/asm/irqflags.h @@ -1,14 +1,12 @@ /* - * include/asm-s390/irqflags.h - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Heiko Carstens + * Copyright IBM Corp. 2006,2010 + * Author(s): Martin Schwidefsky */ #ifndef __ASM_IRQFLAGS_H #define __ASM_IRQFLAGS_H -#ifdef __KERNEL__ +#include #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) @@ -102,5 +100,4 @@ static inline int raw_irqs_disabled_flags(unsigned long flags) /* For spinlocks etc */ #define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) -#endif /* __KERNEL__ */ #endif /* __ASM_IRQFLAGS_H */ -- cgit v0.10.2 From 0b4d78903bf48fe6b125c4c9f0755437a4f21d47 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 27 Jan 2010 10:12:37 +0100 Subject: [S390] use set_current_state in sigsuspend Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 1675c48..6289945 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -64,7 +64,7 @@ SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - current->state = TASK_INTERRUPTIBLE; + set_current_state(TASK_INTERRUPTIBLE); schedule(); set_thread_flag(TIF_RESTORE_SIGMASK); -- cgit v0.10.2 From 0b665d770d2d4dca8e9ea53129735fe214838ec9 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Wed, 27 Jan 2010 10:12:38 +0100 Subject: [S390] sclp_vt220: set initial terminal window size When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index b9d2a00..3796ffd 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -495,6 +495,10 @@ sclp_vt220_open(struct tty_struct *tty, struct file *filp) if (tty->driver_data == NULL) return -ENOMEM; tty->low_latency = 0; + if (!tty->winsize.ws_row && !tty->winsize.ws_col) { + tty->winsize.ws_row = 24; + tty->winsize.ws_col = 80; + } } return 0; } -- cgit v0.10.2 From 19b123ebacacdce5e75045bfe82122b01c821a5b Mon Sep 17 00:00:00 2001 From: Felix Beck Date: Wed, 27 Jan 2010 10:12:39 +0100 Subject: [S390] zcrypt: Do not remove coprocessor for error 8/72 In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c index a23726a..142f72a 100644 --- a/drivers/s390/crypto/zcrypt_pcicc.c +++ b/drivers/s390/crypto/zcrypt_pcicc.c @@ -373,6 +373,8 @@ static int convert_type86(struct zcrypt_device *zdev, zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; return -EAGAIN; } + if (service_rc == 8 && service_rs == 72) + return -EINVAL; zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c index 79c1205..68f3e62 100644 --- a/drivers/s390/crypto/zcrypt_pcixcc.c +++ b/drivers/s390/crypto/zcrypt_pcixcc.c @@ -470,6 +470,8 @@ static int convert_type86_ica(struct zcrypt_device *zdev, } if (service_rc == 12 && service_rs == 769) return -EINVAL; + if (service_rc == 8 && service_rs == 72) + return -EINVAL; zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } -- cgit v0.10.2 From 21ec7f6dbf10492ce9a21718040677d3e68bd57d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 27 Jan 2010 10:12:40 +0100 Subject: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 48215d1..e8ef21c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -571,6 +571,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lm %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts b BASED(sysc_do_svc) diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9aff1d4..f33658f 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -549,6 +549,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lmg %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts j sysc_do_svc -- cgit v0.10.2 From c5ce5b46af76f52dea21f467397d24c4ae6cb3ff Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 26 Jan 2010 17:47:05 +0200 Subject: UBI: fix volume creation input checking Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg Signed-off-by: Artem Bityutskiy Cc: stable@vger.kernel.org diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index f237ddb..111ea41 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -853,7 +853,6 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, break; } - req.name[req.name_len] = '\0'; err = verify_mkvol_req(ubi, &req); if (err) break; -- cgit v0.10.2 From aca3bb5910119d4cf6c28568a642582efb4cc14a Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Fri, 22 Jan 2010 09:41:40 -0600 Subject: x86, UV: Fix RTC latency bug by reading replicated cachelines For SGI UV node controllers (HUB) rev 2.0 or greater, use replicated cachelines to read the RTC timer. This optimization allows faster simulataneous reads from a given socket. Signed-off-by: Dimitri Sivanich Cc: Jack Steiner LKML-Reference: <20100122154140.GB4975@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c index 3c84aa0..2b75ef63 100644 --- a/arch/x86/kernel/uv_time.c +++ b/arch/x86/kernel/uv_time.c @@ -282,10 +282,21 @@ static int uv_rtc_unset_timer(int cpu, int force) /* * Read the RTC. + * + * Starting with HUB rev 2.0, the UV RTC register is replicated across all + * cachelines of it's own page. This allows faster simultaneous reads + * from a given socket. */ static cycle_t uv_read_rtc(struct clocksource *cs) { - return (cycle_t)uv_read_local_mmr(UVH_RTC); + unsigned long offset; + + if (uv_get_min_hub_revision_id() == 1) + offset = 0; + else + offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE; + + return (cycle_t)uv_read_local_mmr(UVH_RTC | offset); } /* diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c index 867b67b..c7072ba 100644 --- a/drivers/char/uv_mmtimer.c +++ b/drivers/char/uv_mmtimer.c @@ -89,13 +89,17 @@ static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case MMTIMER_GETOFFSET: /* offset of the counter */ /* - * UV RTC register is on its own page + * Starting with HUB rev 2.0, the UV RTC register is + * replicated across all cachelines of it's own page. + * This allows faster simultaneous reads from a given socket. + * + * The offset returned is in 64 bit units. */ - if (PAGE_SIZE <= (1 << 16)) - ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1)) - / 8; + if (uv_get_min_hub_revision_id() == 1) + ret = 0; else - ret = -ENOSYS; + ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) % + PAGE_SIZE) / 8; break; case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */ @@ -115,8 +119,8 @@ static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK); break; - case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */ - ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0; + case MMTIMER_MMAPAVAIL: + ret = 1; break; case MMTIMER_GETCOUNTER: -- cgit v0.10.2 From 0531b2aac59c2296570ac52bfc032ef2ace7d5e1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Jan 2010 09:20:03 -0800 Subject: mm: add new 'read_cache_page_gfp()' helper function It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson Signed-off-by: Linus Torvalds diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index ed5d750..3c62ed4 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -253,6 +253,8 @@ extern struct page * read_cache_page_async(struct address_space *mapping, extern struct page * read_cache_page(struct address_space *mapping, pgoff_t index, filler_t *filler, void *data); +extern struct page * read_cache_page_gfp(struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); extern int read_cache_pages(struct address_space *mapping, struct list_head *pages, filler_t *filler, void *data); diff --git a/mm/filemap.c b/mm/filemap.c index 96ac6b0..e373692 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1634,14 +1634,15 @@ EXPORT_SYMBOL(generic_file_readonly_mmap); static struct page *__read_cache_page(struct address_space *mapping, pgoff_t index, int (*filler)(void *,struct page*), - void *data) + void *data, + gfp_t gfp) { struct page *page; int err; repeat: page = find_get_page(mapping, index); if (!page) { - page = page_cache_alloc_cold(mapping); + page = __page_cache_alloc(gfp | __GFP_COLD); if (!page) return ERR_PTR(-ENOMEM); err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL); @@ -1661,31 +1662,18 @@ repeat: return page; } -/** - * read_cache_page_async - read into page cache, fill it if needed - * @mapping: the page's address_space - * @index: the page index - * @filler: function to perform the read - * @data: destination for read data - * - * Same as read_cache_page, but don't wait for page to become unlocked - * after submitting it to the filler. - * - * Read into the page cache. If a page already exists, and PageUptodate() is - * not set, try to fill the page but don't wait for it to become unlocked. - * - * If the page does not get brought uptodate, return -EIO. - */ -struct page *read_cache_page_async(struct address_space *mapping, +static struct page *do_read_cache_page(struct address_space *mapping, pgoff_t index, int (*filler)(void *,struct page*), - void *data) + void *data, + gfp_t gfp) + { struct page *page; int err; retry: - page = __read_cache_page(mapping, index, filler, data); + page = __read_cache_page(mapping, index, filler, data, gfp); if (IS_ERR(page)) return page; if (PageUptodate(page)) @@ -1710,8 +1698,67 @@ out: mark_page_accessed(page); return page; } + +/** + * read_cache_page_async - read into page cache, fill it if needed + * @mapping: the page's address_space + * @index: the page index + * @filler: function to perform the read + * @data: destination for read data + * + * Same as read_cache_page, but don't wait for page to become unlocked + * after submitting it to the filler. + * + * Read into the page cache. If a page already exists, and PageUptodate() is + * not set, try to fill the page but don't wait for it to become unlocked. + * + * If the page does not get brought uptodate, return -EIO. + */ +struct page *read_cache_page_async(struct address_space *mapping, + pgoff_t index, + int (*filler)(void *,struct page*), + void *data) +{ + return do_read_cache_page(mapping, index, filler, data, mapping_gfp_mask(mapping)); +} EXPORT_SYMBOL(read_cache_page_async); +static struct page *wait_on_page_read(struct page *page) +{ + if (!IS_ERR(page)) { + wait_on_page_locked(page); + if (!PageUptodate(page)) { + page_cache_release(page); + page = ERR_PTR(-EIO); + } + } + return page; +} + +/** + * read_cache_page_gfp - read into page cache, using specified page allocation flags. + * @mapping: the page's address_space + * @index: the page index + * @gfp: the page allocator flags to use if allocating + * + * This is the same as "read_mapping_page(mapping, index, NULL)", but with + * any new page allocations done using the specified allocation flags. Note + * that the Radix tree operations will still use GFP_KERNEL, so you can't + * expect to do this atomically or anything like that - but you can pass in + * other page requirements. + * + * If the page does not get brought uptodate, return -EIO. + */ +struct page *read_cache_page_gfp(struct address_space *mapping, + pgoff_t index, + gfp_t gfp) +{ + filler_t *filler = (filler_t *)mapping->a_ops->readpage; + + return wait_on_page_read(do_read_cache_page(mapping, index, filler, NULL, gfp)); +} +EXPORT_SYMBOL(read_cache_page_gfp); + /** * read_cache_page - read into page cache, fill it if needed * @mapping: the page's address_space @@ -1729,18 +1776,7 @@ struct page *read_cache_page(struct address_space *mapping, int (*filler)(void *,struct page*), void *data) { - struct page *page; - - page = read_cache_page_async(mapping, index, filler, data); - if (IS_ERR(page)) - goto out; - wait_on_page_locked(page); - if (!PageUptodate(page)) { - page_cache_release(page); - page = ERR_PTR(-EIO); - } - out: - return page; + return wait_on_page_read(read_cache_page_async(mapping, index, filler, data)); } EXPORT_SYMBOL(read_cache_page); -- cgit v0.10.2 From 7a481436787cbc932af6c407b317ac603969a242 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 26 Jan 2010 21:39:07 +0100 Subject: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index a61571c..2345d41 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2420,6 +2420,7 @@ static void ohci_pmac_off(struct pci_dev *dev) #define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT #define PCI_DEVICE_ID_AGERE_FW643 0x5901 +#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024 static int __devinit pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) @@ -2488,7 +2489,8 @@ static int __devinit pci_probe(struct pci_dev *dev, #if !defined(CONFIG_X86_32) /* dual-buffer mode is broken with descriptor addresses above 2G */ if (dev->vendor == PCI_VENDOR_ID_TI && - dev->device == PCI_DEVICE_ID_TI_TSB43AB22) + (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 || + dev->device == PCI_DEVICE_ID_TI_TSB43AB23)) ohci->use_dualbuffer = false; #endif -- cgit v0.10.2 From 4bdadb9785696439c6e2b3efe34aa76df1149c83 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 27 Jan 2010 13:36:32 +0000 Subject: drm/i915: Selectively enable self-reclaim Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson Cc: KOSAKI Motohiro Cc: Hugh Dickins Cc: Jesse Barnes Cc: Eric Anholt Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index e9dbb48..8bf3770 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -142,19 +142,6 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) if (IS_ERR(obj->filp)) goto free; - /* Basically we want to disable the OOM killer and handle ENOMEM - * ourselves by sacrificing pages from cached buffers. - * XXX shmem_file_[gs]et_gfp_mask() - */ - mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, - GFP_HIGHUSER | - __GFP_COLD | - __GFP_FS | - __GFP_RECLAIMABLE | - __GFP_NORETRY | - __GFP_NOWARN | - __GFP_NOMEMALLOC); - kref_init(&obj->refcount); kref_init(&obj->handlecount); obj->size = size; diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 9c9998c..a894ade 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -290,7 +290,7 @@ static int i915_batchbuffer_info(struct seq_file *m, void *data) list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { obj = obj_priv->obj; if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) { - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) { DRM_ERROR("Failed to get pages: %d\n", ret); spin_unlock(&dev_priv->mm.active_list_lock); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2c16694..aaf934d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -872,7 +872,7 @@ int i915_gem_attach_phys_object(struct drm_device *dev, void i915_gem_detach_phys_object(struct drm_device *dev, struct drm_gem_object *obj); void i915_gem_free_all_phys_object(struct drm_device *dev); -int i915_gem_object_get_pages(struct drm_gem_object *obj); +int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask); void i915_gem_object_put_pages(struct drm_gem_object *obj); void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv); void i915_gem_object_flush_write_domain(struct drm_gem_object *obj); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0c67924..dda787a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -277,7 +277,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret != 0) goto fail_unlock; @@ -321,40 +321,24 @@ fail_unlock: return ret; } -static inline gfp_t -i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj) -{ - return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping); -} - -static inline void -i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp) -{ - mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp); -} - static int i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj) { int ret; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN); /* If we've insufficient memory to map in the pages, attempt * to make some space by throwing out some old buffers. */ if (ret == -ENOMEM) { struct drm_device *dev = obj->dev; - gfp_t gfp; ret = i915_gem_evict_something(dev, obj->size); if (ret) return ret; - gfp = i915_gem_object_get_page_gfp_mask(obj); - i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY); - ret = i915_gem_object_get_pages(obj); - i915_gem_object_set_page_gfp_mask (obj, gfp); + ret = i915_gem_object_get_pages(obj, 0); } return ret; @@ -790,7 +774,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret != 0) goto fail_unlock; @@ -2230,7 +2214,8 @@ i915_gem_evict_something(struct drm_device *dev, int min_size) } int -i915_gem_object_get_pages(struct drm_gem_object *obj) +i915_gem_object_get_pages(struct drm_gem_object *obj, + gfp_t gfpmask) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int page_count, i; @@ -2256,7 +2241,10 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) inode = obj->filp->f_path.dentry->d_inode; mapping = inode->i_mapping; for (i = 0; i < page_count; i++) { - page = read_mapping_page(mapping, i, NULL); + page = read_cache_page_gfp(mapping, i, + mapping_gfp_mask (mapping) | + __GFP_COLD | + gfpmask); if (IS_ERR(page)) { ret = PTR_ERR(page); i915_gem_object_put_pages(obj); @@ -2579,7 +2567,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_mm_node *free_space; - bool retry_alloc = false; + gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN; int ret; if (obj_priv->madv != I915_MADV_WILLNEED) { @@ -2623,15 +2611,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) DRM_INFO("Binding object of size %zd at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif - if (retry_alloc) { - i915_gem_object_set_page_gfp_mask (obj, - i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY); - } - ret = i915_gem_object_get_pages(obj); - if (retry_alloc) { - i915_gem_object_set_page_gfp_mask (obj, - i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY); - } + ret = i915_gem_object_get_pages(obj, gfpmask); if (ret) { drm_mm_put_block(obj_priv->gtt_space); obj_priv->gtt_space = NULL; @@ -2641,9 +2621,9 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev, obj->size); if (ret) { /* now try to shrink everyone else */ - if (! retry_alloc) { - retry_alloc = true; - goto search_free; + if (gfpmask) { + gfpmask = 0; + goto search_free; } return ret; @@ -4946,7 +4926,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, if (!obj_priv->phys_obj) return; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) goto out; @@ -5004,7 +4984,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1]; obj_priv->phys_obj->cur_obj = obj; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) { DRM_ERROR("failed to get page list\n"); goto out; -- cgit v0.10.2 From 8ce28d6abff34886d3797b25324c940471b99164 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Jan 2010 20:26:08 +0100 Subject: ALSA: hda - Add an ASUS mobo to MSI blacklist Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: Sid Boyce Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ec9c348..565de38 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2332,6 +2332,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ + SND_PCI_QUIRK(0x1043, 0x829c, "ASUS", 0), /* nvidia */ {} }; -- cgit v0.10.2 From fe1d45e08650213ec83a72d3499c3dd703243792 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 15 Jan 2010 20:34:46 +0800 Subject: MIPS: Add support of LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9541171..8b5d174 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1311,6 +1311,7 @@ config SYS_SUPPORTS_ZBOOT select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO config SYS_SUPPORTS_ZBOOT_UART16550 bool diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 671d344..bdcfd49 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -41,9 +41,11 @@ $(obj)/vmlinux.bin: $(KBUILD_IMAGE) suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix_$(CONFIG_KERNEL_LZO) = lzo tool_$(CONFIG_KERNEL_GZIP) = gzip tool_$(CONFIG_KERNEL_BZIP2) = bzip2 tool_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_LZO) = lzo $(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin $(call if_changed,$(tool_y)) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index e48fd72..55d02b3 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -77,6 +77,10 @@ void *memset(void *s, int c, size_t n) #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + void decompress_kernel(unsigned long boot_heap_start) { int zimage_size; -- cgit v0.10.2 From 9c4a6fce2032fcb5bb8339d53fd3dadfd7ddfb98 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Wed, 20 Jan 2010 20:50:07 +0000 Subject: MIPS: Fix vmlinuz build for 32bit-only math shells POSIX requires $(()) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter Acked-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index bdcfd49..9df903d 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -14,8 +14,11 @@ # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) -VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) -VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE" +HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10))) +LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32)))) # set the default size of the mallocing area for decompressing BOOT_HEAP_SIZE := 0x400000 -- cgit v0.10.2 From 59dfa2fcaecc39fb88bfa196cb15adca7146867a Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Wed, 23 Dec 2009 17:34:46 -0800 Subject: MIPS: PowerTV: Streamline access to platform device registers Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h new file mode 100644 index 0000000..6f26cb0 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic_reg_map.h @@ -0,0 +1,90 @@ +/* + * asic_reg_map.h + * + * A macro-enclosed list of the elements for the register_map structure for + * use in defining and manipulating the structure. + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +REGISTER_MAP_ELEMENT(eic_slow0_strt_add) +REGISTER_MAP_ELEMENT(eic_cfg_bits) +REGISTER_MAP_ELEMENT(eic_ready_status) +REGISTER_MAP_ELEMENT(chipver3) +REGISTER_MAP_ELEMENT(chipver2) +REGISTER_MAP_ELEMENT(chipver1) +REGISTER_MAP_ELEMENT(chipver0) +REGISTER_MAP_ELEMENT(uart1_intstat) +REGISTER_MAP_ELEMENT(uart1_inten) +REGISTER_MAP_ELEMENT(uart1_config1) +REGISTER_MAP_ELEMENT(uart1_config2) +REGISTER_MAP_ELEMENT(uart1_divisorhi) +REGISTER_MAP_ELEMENT(uart1_divisorlo) +REGISTER_MAP_ELEMENT(uart1_data) +REGISTER_MAP_ELEMENT(uart1_status) +REGISTER_MAP_ELEMENT(int_stat_3) +REGISTER_MAP_ELEMENT(int_stat_2) +REGISTER_MAP_ELEMENT(int_stat_1) +REGISTER_MAP_ELEMENT(int_stat_0) +REGISTER_MAP_ELEMENT(int_config) +REGISTER_MAP_ELEMENT(int_int_scan) +REGISTER_MAP_ELEMENT(ien_int_3) +REGISTER_MAP_ELEMENT(ien_int_2) +REGISTER_MAP_ELEMENT(ien_int_1) +REGISTER_MAP_ELEMENT(ien_int_0) +REGISTER_MAP_ELEMENT(int_level_3_3) +REGISTER_MAP_ELEMENT(int_level_3_2) +REGISTER_MAP_ELEMENT(int_level_3_1) +REGISTER_MAP_ELEMENT(int_level_3_0) +REGISTER_MAP_ELEMENT(int_level_2_3) +REGISTER_MAP_ELEMENT(int_level_2_2) +REGISTER_MAP_ELEMENT(int_level_2_1) +REGISTER_MAP_ELEMENT(int_level_2_0) +REGISTER_MAP_ELEMENT(int_level_1_3) +REGISTER_MAP_ELEMENT(int_level_1_2) +REGISTER_MAP_ELEMENT(int_level_1_1) +REGISTER_MAP_ELEMENT(int_level_1_0) +REGISTER_MAP_ELEMENT(int_level_0_3) +REGISTER_MAP_ELEMENT(int_level_0_2) +REGISTER_MAP_ELEMENT(int_level_0_1) +REGISTER_MAP_ELEMENT(int_level_0_0) +REGISTER_MAP_ELEMENT(int_docsis_en) +REGISTER_MAP_ELEMENT(mips_pll_setup) +REGISTER_MAP_ELEMENT(usb_fs) +REGISTER_MAP_ELEMENT(test_bus) +REGISTER_MAP_ELEMENT(crt_spare) +REGISTER_MAP_ELEMENT(usb2_ohci_int_mask) +REGISTER_MAP_ELEMENT(usb2_strap) +REGISTER_MAP_ELEMENT(ehci_hcapbase) +REGISTER_MAP_ELEMENT(ohci_hc_revision) +REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer) +REGISTER_MAP_ELEMENT(usb2_control) +REGISTER_MAP_ELEMENT(usb2_stbus_obc) +REGISTER_MAP_ELEMENT(usb2_stbus_mess_size) +REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size) +REGISTER_MAP_ELEMENT(pcie_regs) +REGISTER_MAP_ELEMENT(tim_ch) +REGISTER_MAP_ELEMENT(tim_cl) +REGISTER_MAP_ELEMENT(gpio_dout) +REGISTER_MAP_ELEMENT(gpio_din) +REGISTER_MAP_ELEMENT(gpio_dir) +REGISTER_MAP_ELEMENT(watchdog) +REGISTER_MAP_ELEMENT(front_panel) +REGISTER_MAP_ELEMENT(misc_clk_ctl1) +REGISTER_MAP_ELEMENT(misc_clk_ctl2) +REGISTER_MAP_ELEMENT(crt_ext_ctl) +REGISTER_MAP_ELEMENT(register_maps) diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h index 9a65c93..1e11236 100644 --- a/arch/mips/include/asm/mach-powertv/asic_regs.h +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -35,11 +35,12 @@ enum asic_type { #define CRONUS_11 0x0B4C1C21 #define CRONUSLITE_10 0x0B4C1C40 -#define NAND_FLASH_BASE 0x03000000 -#define ZEUS_IO_BASE 0x09000000 +#define NAND_FLASH_BASE 0x03000000 #define CALLIOPE_IO_BASE 0x08000000 -#define CRONUS_IO_BASE 0x09000000 -#define ASIC_IO_SIZE 0x01000000 +#define CRONUS_IO_BASE 0x09000000 +#define ZEUS_IO_BASE 0x09000000 + +#define ASIC_IO_SIZE 0x01000000 /* Definitions for backward compatibility */ #define UART1_INTSTAT uart1_intstat @@ -52,96 +53,62 @@ enum asic_type { #define UART1_STATUS uart1_status /* ASIC register enumeration */ +union register_map_entry { + unsigned long phys; + u32 *virt; +}; + +#define REGISTER_MAP_ELEMENT(x) union register_map_entry x; struct register_map { - u32 eic_slow0_strt_add; - u32 eic_cfg_bits; - u32 eic_ready_status; - - u32 chipver3; - u32 chipver2; - u32 chipver1; - u32 chipver0; - - u32 uart1_intstat; - u32 uart1_inten; - u32 uart1_config1; - u32 uart1_config2; - u32 uart1_divisorhi; - u32 uart1_divisorlo; - u32 uart1_data; - u32 uart1_status; - - u32 int_stat_3; - u32 int_stat_2; - u32 int_stat_1; - u32 int_stat_0; - u32 int_config; - u32 int_int_scan; - u32 ien_int_3; - u32 ien_int_2; - u32 ien_int_1; - u32 ien_int_0; - u32 int_level_3_3; - u32 int_level_3_2; - u32 int_level_3_1; - u32 int_level_3_0; - u32 int_level_2_3; - u32 int_level_2_2; - u32 int_level_2_1; - u32 int_level_2_0; - u32 int_level_1_3; - u32 int_level_1_2; - u32 int_level_1_1; - u32 int_level_1_0; - u32 int_level_0_3; - u32 int_level_0_2; - u32 int_level_0_1; - u32 int_level_0_0; - u32 int_docsis_en; - - u32 mips_pll_setup; - u32 usb_fs; - u32 test_bus; - u32 crt_spare; - u32 usb2_ohci_int_mask; - u32 usb2_strap; - u32 ehci_hcapbase; - u32 ohci_hc_revision; - u32 bcm1_bs_lmi_steer; - u32 usb2_control; - u32 usb2_stbus_obc; - u32 usb2_stbus_mess_size; - u32 usb2_stbus_chunk_size; - - u32 pcie_regs; - u32 tim_ch; - u32 tim_cl; - u32 gpio_dout; - u32 gpio_din; - u32 gpio_dir; - u32 watchdog; - u32 front_panel; - - u32 register_maps; +#include }; +#undef REGISTER_MAP_ELEMENT + +/** + * register_map_offset_phys - add an offset to the physical address + * @map: Pointer to the &struct register_map + * @offset: Value to add + * + * Only adds the base to non-zero physical addresses + */ +static inline void register_map_offset_phys(struct register_map *map, + unsigned long offset) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + if (map->x.phys != 0) \ + map->x.phys += offset; \ + } while (false); + +#include +#undef REGISTER_MAP_ELEMENT +} + +/** + * register_map_virtualize - Convert ®ister_map to virtual addresses + * @map: Pointer to ®ister_map to virtualize + */ +static inline void register_map_virtualize(struct register_map *map) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + map->x.virt = (!map->x.phys) ? NULL : \ + UNCAC_ADDR(phys_to_virt(map->x.phys)); \ + } while (false); + +#include +#undef REGISTER_MAP_ELEMENT +} -extern enum asic_type asic; -extern const struct register_map *register_map; -extern unsigned long asic_phy_base; /* Physical address of ASIC */ -extern unsigned long asic_base; /* Virtual address of ASIC */ +extern struct register_map _asic_register_map; /* * Macros to interface to registers through their ioremapped address - * asic_reg_offset Returns the offset of a given register from the start - * of the ASIC address space * asic_reg_phys_addr Returns the physical address of the given register * asic_reg_addr Returns the iomapped virtual address of the given * register. */ -#define asic_reg_offset(x) (register_map->x) -#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) -#define asic_reg_addr(x) \ - ((unsigned int *) (asic_base + asic_reg_offset(x))) +#define asic_reg_addr(x) (_asic_register_map.x.virt) +#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \ + (unsigned long) asic_reg_addr(x)))) /* * The asic_reg macro is gone. It should be replaced by either asic_read or diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 03d3884..1ae6623 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map calliope_register_map = { - .eic_slow0_strt_add = 0x800000, - .eic_cfg_bits = 0x800038, - .eic_ready_status = 0x80004c, +#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) - .chipver3 = 0xA00800, - .chipver2 = 0xA00804, - .chipver1 = 0xA00808, - .chipver0 = 0xA0080c, +const struct register_map calliope_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, + .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, + .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, + + .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)}, + .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)}, + .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)}, + .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0xA01800, - .uart1_inten = 0xA01804, - .uart1_config1 = 0xA01808, - .uart1_config2 = 0xA0180C, - .uart1_divisorhi = 0xA01810, - .uart1_divisorlo = 0xA01814, - .uart1_data = 0xA01818, - .uart1_status = 0xA0181C, + .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)}, + .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)}, + .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)}, + .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)}, + .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)}, + .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)}, + .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)}, + .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)}, - .int_stat_3 = 0xA02800, - .int_stat_2 = 0xA02804, - .int_stat_1 = 0xA02808, - .int_stat_0 = 0xA0280c, - .int_config = 0xA02810, - .int_int_scan = 0xA02818, - .ien_int_3 = 0xA02830, - .ien_int_2 = 0xA02834, - .ien_int_1 = 0xA02838, - .ien_int_0 = 0xA0283c, - .int_level_3_3 = 0xA02880, - .int_level_3_2 = 0xA02884, - .int_level_3_1 = 0xA02888, - .int_level_3_0 = 0xA0288c, - .int_level_2_3 = 0xA02890, - .int_level_2_2 = 0xA02894, - .int_level_2_1 = 0xA02898, - .int_level_2_0 = 0xA0289c, - .int_level_1_3 = 0xA028a0, - .int_level_1_2 = 0xA028a4, - .int_level_1_1 = 0xA028a8, - .int_level_1_0 = 0xA028ac, - .int_level_0_3 = 0xA028b0, - .int_level_0_2 = 0xA028b4, - .int_level_0_1 = 0xA028b8, - .int_level_0_0 = 0xA028bc, - .int_docsis_en = 0xA028F4, + .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)}, + .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)}, + .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)}, + .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)}, + .int_config = {.phys = CALLIOPE_ADDR(0xA02810)}, + .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)}, + .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)}, + .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)}, + .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)}, + .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)}, + .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)}, + .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)}, + .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)}, + .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)}, + .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)}, + .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)}, + .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)}, + .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)}, + .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)}, + .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)}, + .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)}, + .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)}, + .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)}, + .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)}, + .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)}, + .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)}, + .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)}, - .mips_pll_setup = 0x980000, - .usb_fs = 0x980030, /* -default 72800028- */ - .test_bus = 0x9800CC, - .crt_spare = 0x9800d4, - .usb2_ohci_int_mask = 0x9A000c, - .usb2_strap = 0x9A0014, - .ehci_hcapbase = 0x9BFE00, - .ohci_hc_revision = 0x9BFC00, - .bcm1_bs_lmi_steer = 0x9E0004, - .usb2_control = 0x9E0054, - .usb2_stbus_obc = 0x9BFF00, - .usb2_stbus_mess_size = 0x9BFF04, - .usb2_stbus_chunk_size = 0x9BFF08, + .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)}, + .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)}, + .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)}, + .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)}, + .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)}, + .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)}, + .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)}, + .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)}, + .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)}, + .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)}, + .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)}, + .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)}, + .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)}, - .pcie_regs = 0x000000, /* -doesn't exist- */ - .tim_ch = 0xA02C10, - .tim_cl = 0xA02C14, - .gpio_dout = 0xA02c20, - .gpio_din = 0xA02c24, - .gpio_dir = 0xA02c2C, - .watchdog = 0xA02c30, - .front_panel = 0x000000, /* -not used- */ + .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ + .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)}, + .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)}, + .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)}, + .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)}, + .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)}, + .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)}, + .front_panel = {.phys = 0x000000}, /* -not used- */ }; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index 5f4589c..5bb64bf 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map cronus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004C, +#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) - .chipver3 = 0x2A0800, - .chipver2 = 0x2A0804, - .chipver1 = 0x2A0808, - .chipver0 = 0x2A080C, +const struct register_map cronus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, + + .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)}, + .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)}, + .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)}, + .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x2A1800, - .uart1_inten = 0x2A1804, - .uart1_config1 = 0x2A1808, - .uart1_config2 = 0x2A180C, - .uart1_divisorhi = 0x2A1810, - .uart1_divisorlo = 0x2A1814, - .uart1_data = 0x2A1818, - .uart1_status = 0x2A181C, + .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)}, + .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)}, + .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)}, + .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)}, + .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)}, + .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)}, + .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)}, + .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)}, - .int_stat_3 = 0x2A2800, - .int_stat_2 = 0x2A2804, - .int_stat_1 = 0x2A2808, - .int_stat_0 = 0x2A280C, - .int_config = 0x2A2810, - .int_int_scan = 0x2A2818, - .ien_int_3 = 0x2A2830, - .ien_int_2 = 0x2A2834, - .ien_int_1 = 0x2A2838, - .ien_int_0 = 0x2A283C, - .int_level_3_3 = 0x2A2880, - .int_level_3_2 = 0x2A2884, - .int_level_3_1 = 0x2A2888, - .int_level_3_0 = 0x2A288C, - .int_level_2_3 = 0x2A2890, - .int_level_2_2 = 0x2A2894, - .int_level_2_1 = 0x2A2898, - .int_level_2_0 = 0x2A289C, - .int_level_1_3 = 0x2A28A0, - .int_level_1_2 = 0x2A28A4, - .int_level_1_1 = 0x2A28A8, - .int_level_1_0 = 0x2A28AC, - .int_level_0_3 = 0x2A28B0, - .int_level_0_2 = 0x2A28B4, - .int_level_0_1 = 0x2A28B8, - .int_level_0_0 = 0x2A28BC, - .int_docsis_en = 0x2A28F4, + .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)}, + .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)}, + .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)}, + .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)}, + .int_config = {.phys = CRONUS_ADDR(0x2A2810)}, + .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)}, + .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)}, + .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)}, + .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)}, + .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)}, + .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)}, + .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)}, + .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)}, + .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)}, + .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)}, + .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)}, + .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)}, + .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)}, + .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)}, + .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)}, + .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)}, + .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)}, + .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)}, + .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)}, + .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)}, + .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)}, + .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, - .mips_pll_setup = 0x1C0000, - .usb_fs = 0x1C0018, - .test_bus = 0x1C00CC, - .crt_spare = 0x1c00d4, - .usb2_ohci_int_mask = 0x20000C, - .usb2_strap = 0x200014, - .ehci_hcapbase = 0x21FE00, - .ohci_hc_revision = 0x1E0000, - .bcm1_bs_lmi_steer = 0x2E0008, - .usb2_control = 0x2E004C, - .usb2_stbus_obc = 0x21FF00, - .usb2_stbus_mess_size = 0x21FF04, - .usb2_stbus_chunk_size = 0x21FF08, + .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, + .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)}, + .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, + .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, + .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, + .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, + .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, + .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)}, + .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, + .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, + .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, + .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)}, + .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)}, - .pcie_regs = 0x220000, - .tim_ch = 0x2A2C10, - .tim_cl = 0x2A2C14, - .gpio_dout = 0x2A2C20, - .gpio_din = 0x2A2C24, - .gpio_dir = 0x2A2C2C, - .watchdog = 0x2A2C30, - .front_panel = 0x2A3800, + .pcie_regs = {.phys = CRONUS_ADDR(0x220000)}, + .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)}, + .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)}, + .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)}, + .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)}, + .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)}, + .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)}, + .front_panel = {.phys = CRONUS_ADDR(0x2A3800)}, }; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 1469daa..095cbe10 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map zeus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004c, +#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) - .chipver3 = 0x280800, - .chipver2 = 0x280804, - .chipver1 = 0x280808, - .chipver0 = 0x28080c, +const struct register_map zeus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, + + .chipver3 = {.phys = ZEUS_ADDR(0x280800)}, + .chipver2 = {.phys = ZEUS_ADDR(0x280804)}, + .chipver1 = {.phys = ZEUS_ADDR(0x280808)}, + .chipver0 = {.phys = ZEUS_ADDR(0x28080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x281800, - .uart1_inten = 0x281804, - .uart1_config1 = 0x281808, - .uart1_config2 = 0x28180C, - .uart1_divisorhi = 0x281810, - .uart1_divisorlo = 0x281814, - .uart1_data = 0x281818, - .uart1_status = 0x28181C, + .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)}, + .uart1_inten = {.phys = ZEUS_ADDR(0x281804)}, + .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)}, + .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)}, + .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)}, + .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)}, + .uart1_data = {.phys = ZEUS_ADDR(0x281818)}, + .uart1_status = {.phys = ZEUS_ADDR(0x28181C)}, - .int_stat_3 = 0x282800, - .int_stat_2 = 0x282804, - .int_stat_1 = 0x282808, - .int_stat_0 = 0x28280c, - .int_config = 0x282810, - .int_int_scan = 0x282818, - .ien_int_3 = 0x282830, - .ien_int_2 = 0x282834, - .ien_int_1 = 0x282838, - .ien_int_0 = 0x28283c, - .int_level_3_3 = 0x282880, - .int_level_3_2 = 0x282884, - .int_level_3_1 = 0x282888, - .int_level_3_0 = 0x28288c, - .int_level_2_3 = 0x282890, - .int_level_2_2 = 0x282894, - .int_level_2_1 = 0x282898, - .int_level_2_0 = 0x28289c, - .int_level_1_3 = 0x2828a0, - .int_level_1_2 = 0x2828a4, - .int_level_1_1 = 0x2828a8, - .int_level_1_0 = 0x2828ac, - .int_level_0_3 = 0x2828b0, - .int_level_0_2 = 0x2828b4, - .int_level_0_1 = 0x2828b8, - .int_level_0_0 = 0x2828bc, - .int_docsis_en = 0x2828F4, + .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)}, + .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)}, + .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)}, + .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)}, + .int_config = {.phys = ZEUS_ADDR(0x282810)}, + .int_int_scan = {.phys = ZEUS_ADDR(0x282818)}, + .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)}, + .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)}, + .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)}, + .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)}, + .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)}, + .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)}, + .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)}, + .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)}, + .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)}, + .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)}, + .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)}, + .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)}, + .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)}, + .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)}, + .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)}, + .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)}, + .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)}, + .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)}, + .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)}, + .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)}, + .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)}, - .mips_pll_setup = 0x1a0000, - .usb_fs = 0x1a0018, - .test_bus = 0x1a0238, - .crt_spare = 0x1a0090, - .usb2_ohci_int_mask = 0x1e000c, - .usb2_strap = 0x1e0014, - .ehci_hcapbase = 0x1FFE00, - .ohci_hc_revision = 0x1FFC00, - .bcm1_bs_lmi_steer = 0x2C0008, - .usb2_control = 0x2c01a0, - .usb2_stbus_obc = 0x1FFF00, - .usb2_stbus_mess_size = 0x1FFF04, - .usb2_stbus_chunk_size = 0x1FFF08, + .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)}, + .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)}, + .test_bus = {.phys = ZEUS_ADDR(0x1a0238)}, + .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)}, + .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)}, + .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)}, + .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)}, + .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)}, + .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)}, + .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)}, + .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)}, + .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)}, + .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)}, - .pcie_regs = 0x200000, - .tim_ch = 0x282C10, - .tim_cl = 0x282C14, - .gpio_dout = 0x282c20, - .gpio_din = 0x282c24, - .gpio_dir = 0x282c2C, - .watchdog = 0x282c30, - .front_panel = 0x283800, + .pcie_regs = {.phys = ZEUS_ADDR(0x200000)}, + .tim_ch = {.phys = ZEUS_ADDR(0x282C10)}, + .tim_cl = {.phys = ZEUS_ADDR(0x282C14)}, + .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)}, + .gpio_din = {.phys = ZEUS_ADDR(0x282c24)}, + .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)}, + .watchdog = {.phys = ZEUS_ADDR(0x282c30)}, + .front_panel = {.phys = ZEUS_ADDR(0x283800)}, }; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index bae8288..6a88219 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -67,8 +67,8 @@ enum asic_type asic; unsigned int platform_features; unsigned int platform_family; -const struct register_map *register_map; -EXPORT_SYMBOL(register_map); /* Exported for testing */ +struct register_map _asic_register_map; +EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */ unsigned long asic_phy_base; unsigned long asic_base; EXPORT_SYMBOL(asic_base); /* Exported for testing */ @@ -418,6 +418,15 @@ void platform_unconfigure_usb_ohci() { } +static void __init set_register_map(unsigned long phys_base, + const struct register_map *map) +{ + asic_phy_base = phys_base; + _asic_register_map = *map; + register_map_virtualize(&_asic_register_map); + asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE); +} + /** * configure_platform - configuration based on platform type. */ @@ -431,10 +440,7 @@ void __init configure_platform(void) case FAMILY_1500VZF: platform_features = FFS_CAPABLE; asic = ASIC_CALLIOPE; - asic_phy_base = CALLIOPE_IO_BASE; - register_map = &calliope_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CALLIOPE_IO_BASE, &calliope_register_map); if (platform_family == FAMILY_1500VZE) { gp_resources = non_dvr_vze_calliope_resources; @@ -455,10 +461,7 @@ void __init configure_platform(void) platform_features = FFS_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = non_dvr_zeus_resources; pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); @@ -471,11 +474,6 @@ void __init configure_platform(void) /* The settop has PCIE but it isn't used, so don't advertise * it*/ platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; - asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ - register_map = &cronus_register_map; /* same as Cronus */ - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); - gp_resources = non_dvr_cronuslite_resources; /* ASIC version will determine if this is a real CronusLite or * Castrati(Cronus) */ @@ -489,6 +487,9 @@ void __init configure_platform(void) else asic = ASIC_CRONUSLITE; + /* Cronus and Cronus Lite have the same register map */ + set_register_map(CRONUS_IO_BASE, &cronus_register_map); + gp_resources = non_dvr_cronuslite_resources; pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " "chipversion=0x%08X\n", (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", @@ -498,10 +499,7 @@ void __init configure_platform(void) case FAMILY_4600VZA: platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = non_dvr_cronus_resources; pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); @@ -512,10 +510,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = dvr_zeus_resources; pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); @@ -526,10 +521,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = dvr_cronus_resources; pr_info("Platform: 8600/Vz Class B - CRONUS, " -- cgit v0.10.2 From 010c108d7af708d9e09b83724a058a76803fbc66 Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Mon, 21 Dec 2009 17:49:22 -0800 Subject: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 0696036..dea4aed 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -135,6 +135,7 @@ extern void free_irqno(unsigned int irq); #define CP0_LEGACY_COMPARE_IRQ 7 extern int cp0_compare_irq; +extern int cp0_compare_irq_shift; extern int cp0_perfcount_irq; #endif /* _ASM_IRQ_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index a581d60..f4ab313 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -406,6 +406,16 @@ #define ST0_XX 0x80000000 /* MIPS IV naming */ /* + * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2) + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define INTCTLB_IPPCI 26 +#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI) +#define INTCTLB_IPTI 29 +#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI) + +/* * Bitfields and bit numbers in the coprocessor 0 cause register. * * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. @@ -434,6 +444,8 @@ #define CAUSEF_IV (_ULCAST_(1) << 23) #define CAUSEB_CE 28 #define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_TI 30 +#define CAUSEF_TI (_ULCAST_(1) << 30) #define CAUSEB_BD 31 #define CAUSEF_BD (_ULCAST_(1) << 31) diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index b469ad0..0b2450c 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -97,7 +97,7 @@ void mips_event_handler(struct clock_event_device *dev) */ static int c0_compare_int_pending(void) { - return (read_c0_cause() >> cp0_compare_irq) & 0x100; + return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP); } /* diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 308e434..338dfe8 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1403,6 +1403,7 @@ extern void flush_tlb_handlers(void); * Timer interrupt */ int cp0_compare_irq; +int cp0_compare_irq_shift; /* * Performance counter IRQ or -1 if shared with timer @@ -1493,8 +1494,9 @@ void __cpuinit per_cpu_trap_init(void) * o read IntCtl.IPPCI to determine the performance counter interrupt */ if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; if (cp0_perfcount_irq == cp0_compare_irq) cp0_perfcount_irq = -1; } else { -- cgit v0.10.2 From 35ea63d70f827a26c150993b4b940925bb02b03f Mon Sep 17 00:00:00 2001 From: Leann Ogasawara Date: Wed, 27 Jan 2010 15:29:18 -0800 Subject: x86: Add Dell OptiPlex 760 reboot quirk Dell OptiPlex 760 hangs on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. BugLink: https://bugs.launchpad.net/bugs/488319 Signed-off-by: Leann Ogasawara LKML-Reference: <1264634958.27335.1091.camel@emiko> Cc: Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 1545bc0..704bddc 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -203,6 +203,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "0T656F"), }, }, + { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 760", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), + DMI_MATCH(DMI_BOARD_NAME, "0G919G"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400", -- cgit v0.10.2 From 11854247e2c851e7ff9ce138e501c6cffc5a4217 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 21 Jan 2010 16:34:27 +0100 Subject: sched: Fix incorrect sanity check We moved to migrate on wakeup, which means that sleeping tasks could still be present on offline cpus. Amend the check to only test running tasks. Reported-by: Heiko Carstens Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/cpu.c b/kernel/cpu.c index 1c8ddd6..08e54e7 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -151,7 +151,7 @@ static inline void check_for_tasks(int cpu) write_lock_irq(&tasklist_lock); for_each_process(p) { - if (task_cpu(p) == cpu && + if (task_cpu(p) == cpu && p->state == TASK_RUNNING && (!cputime_eq(p->utime, cputime_zero) || !cputime_eq(p->stime, cputime_zero))) printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\ -- cgit v0.10.2 From 9d3cfc4c1d17c6d3bc1373e3b954c56b92607755 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 25 Jan 2010 14:56:34 +0100 Subject: sched: Correct printk whitespace in warning from cpu down task check Due to an incorrect line break the output currently contains tabs. Also remove trailing space. The actual output that logcheck sent me looked like this: Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040) After this patch it becomes: Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040) Signed-off-by: Frans Pop Signed-off-by: Peter Zijlstra LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar diff --git a/kernel/cpu.c b/kernel/cpu.c index 08e54e7..677f253 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -154,10 +154,10 @@ static inline void check_for_tasks(int cpu) if (task_cpu(p) == cpu && p->state == TASK_RUNNING && (!cputime_eq(p->utime, cputime_zero) || !cputime_eq(p->stime, cputime_zero))) - printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\ - (state = %ld, flags = %x) \n", - p->comm, task_pid_nr(p), cpu, - p->state, p->flags); + printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d " + "(state = %ld, flags = %x)\n", + p->comm, task_pid_nr(p), cpu, + p->state, p->flags); } write_unlock_irq(&tasklist_lock); } -- cgit v0.10.2 From 57b5e2ae5b5f6b687ef2c644b1cb06bd217cdbe7 Mon Sep 17 00:00:00 2001 From: Jon Dodgson Date: Thu, 28 Jan 2010 00:07:45 -0800 Subject: Input: lifebook - add another Lifebook DMI signature There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 6d7aa10..7c1d7d4 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -53,6 +53,12 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { { /* LifeBook B */ .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"), + }, + }, + { + /* LifeBook B */ + .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"), }, }, -- cgit v0.10.2 From bbec919150037b8a2e58e32d3ba642ba3b6582a5 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 28 Jan 2010 13:43:50 +0100 Subject: reiserfs: Fix vmalloc call under reiserfs lock Vmalloc is called to allocate journal->j_cnode_free_list but we hold the reiserfs lock at this time, which raises a {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion. Just drop the reiserfs lock at this time, as it's not even needed but kept for paranoid reasons. This fixes: [ INFO: inconsistent lock state ] 2.6.33-rc5 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes: (&REISERFS_SB(s)->lock){+.+.?.}, at: [] reiserfs_write_lock_once+0x28/0x50 {RECLAIM_FS-ON-W} state was registered at: [] mark_held_locks+0x62/0x90 [] lockdep_trace_alloc+0x9a/0xc0 [] kmem_cache_alloc+0x26/0xf0 [] __get_vm_area_node+0x6c/0xf0 [] __vmalloc_node+0x7e/0xa0 [] vmalloc+0x2b/0x30 [] journal_init+0x6cb/0xa10 [] reiserfs_fill_super+0x342/0xb80 [] get_sb_bdev+0x145/0x180 [] get_super_block+0x21/0x30 [] vfs_kern_mount+0x40/0xd0 [] do_kern_mount+0x39/0xd0 [] do_mount+0x2c7/0x6d0 [] sys_mount+0x66/0xa0 [] mount_block_root+0xc4/0x245 [] mount_root+0x59/0x5f [] prepare_namespace+0x111/0x14b [] kernel_init+0xcf/0xdb [] kernel_thread_helper+0x6/0x1c irq event stamp: 63236801 hardirqs last enabled at (63236801): [] __mutex_unlock_slowpath+0x9a/0x120 hardirqs last disabled at (63236800): [] __mutex_unlock_slowpath+0x39/0x120 softirqs last enabled at (63218800): [] __do_softirq+0xc1/0x110 softirqs last disabled at (63218789): [] do_softirq+0x4d/0x60 other info that might help us debug this: 2 locks held by kswapd0/313: #0: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x24/0x170 #1: (&type->s_umount_key#19){++++..}, at: [] shrink_dcache_memory+0xfd/0x1a0 stack backtrace: Pid: 313, comm: kswapd0 Not tainted 2.6.33-rc5 #1 Call Trace: [] ? printk+0x18/0x1c [] print_usage_bug+0x15f/0x1a0 [] mark_lock+0x39f/0x5a0 [] ? trace_hardirqs_off+0xb/0x10 [] ? check_usage_forwards+0x0/0xf0 [] __lock_acquire+0x214/0xa70 [] ? sched_clock_cpu+0x95/0x110 [] lock_acquire+0x7a/0xa0 [] ? reiserfs_write_lock_once+0x28/0x50 [] mutex_lock_nested+0x5f/0x2b0 [] ? reiserfs_write_lock_once+0x28/0x50 [] ? reiserfs_write_lock_once+0x28/0x50 [] reiserfs_write_lock_once+0x28/0x50 [] reiserfs_delete_inode+0x50/0x140 [] ? generic_delete_inode+0x5f/0x150 [] ? reiserfs_delete_inode+0x0/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] dentry_iput+0x6f/0xf0 [] d_kill+0x24/0x50 [] __shrink_dcache_sb+0x21d/0x2b0 [] shrink_dcache_memory+0x12f/0x1a0 [] shrink_slab+0x10e/0x170 [] kswapd+0x477/0x6a0 [] ? isolate_pages_global+0x0/0x1b0 [] ? autoremove_wake_function+0x0/0x40 [] ? kswapd+0x0/0x6a0 [] kthread+0x6c/0x80 [] ? kthread+0x0/0x80 [] kernel_thread_helper+0x6/0x1c Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Chris Mason diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 83ac4d3..ba98546 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2913,7 +2913,9 @@ int journal_init(struct super_block *sb, const char *j_dev_name, journal->j_mount_id = 10; journal->j_state = 0; atomic_set(&(journal->j_jlock), 0); + reiserfs_write_unlock(sb); journal->j_cnode_free_list = allocate_cnodes(num_cnodes); + reiserfs_write_lock(sb); journal->j_cnode_free_orig = journal->j_cnode_free_list; journal->j_cnode_free = journal->j_cnode_free_list ? num_cnodes : 0; journal->j_cnode_used = 0; -- cgit v0.10.2 From 7b139c83c590d4965259aad8889cbb08104b2891 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 27 Jan 2010 21:56:44 +0000 Subject: be2net: Bug fix to support newer generation of BE ASIC Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9fd8e5e..5bc7459 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -276,8 +276,13 @@ struct be_adapter { int link_speed; u8 port_type; u8 transceiver; + u8 generation; /* BladeEngine ASIC generation */ }; +/* BladeEngine Generation numbers */ +#define BE_GEN2 2 +#define BE_GEN3 3 + extern const struct ethtool_ops be_ethtool_ops; #define drvr_stats(adapter) (&adapter->stats.drvr_stats) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index c002b83..13b33c8 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -164,7 +164,8 @@ struct be_cmd_req_hdr { u8 domain; /* dword 0 */ u32 timeout; /* dword 1 */ u32 request_length; /* dword 2 */ - u32 rsvd; /* dword 3 */ + u8 version; /* dword 3 */ + u8 rsvd[3]; /* dword 3 */ }; #define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 33ab8c7..90c5661 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter) static int be_map_pci_bars(struct be_adapter *adapter) { u8 __iomem *addr; + int pcicfg_reg; addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2), pci_resource_len(adapter->pdev, 2)); @@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter) goto pci_map_err; adapter->db = addr; - addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1), - pci_resource_len(adapter->pdev, 1)); + if (adapter->generation == BE_GEN2) + pcicfg_reg = 1; + else + pcicfg_reg = 0; + + addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg), + pci_resource_len(adapter->pdev, pcicfg_reg)); if (addr == NULL) goto pci_map_err; adapter->pcicfg = addr; @@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; + memset(cmd->va, cmd->size, 0); return 0; } @@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev, goto rel_reg; } adapter = netdev_priv(netdev); + + switch (pdev->device) { + case BE_DEVICE_ID1: + case OC_DEVICE_ID1: + adapter->generation = BE_GEN2; + break; + case BE_DEVICE_ID2: + case OC_DEVICE_ID2: + adapter->generation = BE_GEN3; + break; + default: + adapter->generation = 0; + } + adapter->pdev = pdev; pci_set_drvdata(pdev, adapter); adapter->netdev = netdev; -- cgit v0.10.2 From aeedba8bd2cf2f6f7b45bc7853754a03bc926797 Mon Sep 17 00:00:00 2001 From: "Choi, David" Date: Wed, 27 Jan 2010 06:03:16 +0000 Subject: drivers/net: ks8851_mll ethernet network driver Hello David Miller, I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6. >From : David J. Choi Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq(). Signed-off-by : David J. Choi Signed-off-by: David S. Miller diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index c146304..c0ceebc 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) static irqreturn_t ks_irq(int irq, void *pw) { - struct ks_net *ks = pw; - struct net_device *netdev = ks->netdev; + struct net_device *netdev = pw; + struct ks_net *ks = netdev_priv(netdev); u16 status; /*this should be the first in IRQ handler */ -- cgit v0.10.2 From ac26d7d6aca9621f75f6954c159d2727c9c9cbd0 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 27 Jan 2010 15:30:39 +0000 Subject: igbvf: fix issue w/ mapped_as_page being left set after unmap This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 297a5dd..2aa71a7 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; + buffer_info->mapped_as_page = false; buffer_info->dma = pci_map_single(pdev, skb->data, len, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(pdev, buffer_info->dma)) -- cgit v0.10.2 From ebe1b30cd441b576fb9d0b42857af3e423dd5826 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:37:44 +0000 Subject: ixgbe: set the correct DCB bit for pg tx settings Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 56f37f6..383e799 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != adapter->dcb_cfg.bw_percentage[0][bwg_id]) { - adapter->dcb_set_bitmap |= BIT_PG_RX; + adapter->dcb_set_bitmap |= BIT_PG_TX; adapter->dcb_set_bitmap |= BIT_RESETLINK; } } -- cgit v0.10.2 From 3ce1cc52d2e76b6a6b9d0b52b70eb181497efa50 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:38:06 +0000 Subject: ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 383e799..dd4883f 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (!adapter->dcb_set_bitmap) return DCB_NO_HW_CHG; + ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + adapter->ring_feature[RING_F_DCB].indices); + + if (ret) + return DCB_NO_HW_CHG; + /* * Only take down the adapter if the configuration change * requires a reset. @@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) } } - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - adapter->ring_feature[RING_F_DCB].indices); - if (ret) { - if (adapter->dcb_set_bitmap & BIT_RESETLINK) - clear_bit(__IXGBE_RESETTING, &adapter->state); - return DCB_NO_HW_CHG; - } - if (adapter->dcb_cfg.pfc_mode_enable) { if ((adapter->hw.mac.type != ixgbe_mac_82598EB) && (adapter->hw.fc.current_mode != ixgbe_fc_pfc)) -- cgit v0.10.2 From b473946a0853860e13b51c28add5524741117786 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 25 Jan 2010 23:34:15 +0000 Subject: bonding: bond_open error return value The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3f0071c..efa0e41 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev) */ if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { /* something went wrong - fail the open operation */ - return -1; + return -ENOMEM; } INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); -- cgit v0.10.2 From 1d6165851cd8e3f919d446cd6da35dee44e8837e Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 27 Jan 2010 22:44:36 +0300 Subject: block: fix bio_add_page for non trivial merge_bvec_fn case We have to properly decrease bi_size in order to merge_bvec_fn return right result. Otherwise this result in false merge rejects for two absolutely valid bio_vecs. This may cause significant performance penalty for example fs_block_size == 1k and block device is raid0 with small chunk_size = 8k. Then it is impossible to merge 7-th fs-block in to bio which already has 6 fs-blocks. Cc: Signed-off-by: Dmitry Monakhov Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 12429c9..88094af 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -542,13 +542,18 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page if (page == prev->bv_page && offset == prev->bv_offset + prev->bv_len) { + unsigned int prev_bv_len = prev->bv_len; prev->bv_len += len; if (q->merge_bvec_fn) { struct bvec_merge_data bvm = { + /* prev_bvec is already charged in + bi_size, discharge it in order to + simulate merging updated prev_bvec + as new bvec. */ .bi_bdev = bio->bi_bdev, .bi_sector = bio->bi_sector, - .bi_size = bio->bi_size, + .bi_size = bio->bi_size - prev_bv_len, .bi_rw = bio->bi_rw, }; -- cgit v0.10.2 From e8e06eae4ffd683931b928f460c11c40cd3f7fd8 Mon Sep 17 00:00:00 2001 From: Jeff Garrett Date: Wed, 27 Jan 2010 22:02:26 -0600 Subject: x86/PCI: remove IOH range fetching Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 564b008..39fba37 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o obj-y += amd_bus.o -obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o +obj-$(CONFIG_X86_64) += bus_numa.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c deleted file mode 100644 index f81a2fa..0000000 --- a/arch/x86/pci/intel_bus.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * to read io range from IOH pci conf, need to do it after mmconfig is there - */ - -#include -#include -#include -#include -#include - -#include "bus_numa.h" - -static inline void print_ioh_resources(struct pci_root_info *info) -{ - int res_num; - int busnum; - int i; - - printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n", - info->bus_min, info->bus_max); - res_num = info->res_num; - busnum = info->bus_min; - for (i = 0; i < res_num; i++) { - struct resource *res; - - res = &info->res[i]; - printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n", - busnum, i, - (res->flags & IORESOURCE_IO) ? "io port" : - "mmio", - res->start, res->end); - } -} - -#define IOH_LIO 0x108 -#define IOH_LMMIOL 0x10c -#define IOH_LMMIOH 0x110 -#define IOH_LMMIOH_BASEU 0x114 -#define IOH_LMMIOH_LIMITU 0x118 -#define IOH_LCFGBUS 0x11c - -static void __devinit pci_root_bus_res(struct pci_dev *dev) -{ - u16 word; - u32 dword; - struct pci_root_info *info; - u16 io_base, io_end; - u32 mmiol_base, mmiol_end; - u64 mmioh_base, mmioh_end; - int bus_base, bus_end; - - /* some sys doesn't get mmconf enabled */ - if (dev->cfg_size < 0x120) - return; - - if (pci_root_num >= PCI_ROOT_NR) { - printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); - return; - } - - info = &pci_root_info[pci_root_num]; - pci_root_num++; - - pci_read_config_word(dev, IOH_LCFGBUS, &word); - bus_base = (word & 0xff); - bus_end = (word & 0xff00) >> 8; - sprintf(info->name, "PCI Bus #%02x", bus_base); - info->bus_min = bus_base; - info->bus_max = bus_end; - - pci_read_config_word(dev, IOH_LIO, &word); - io_base = (word & 0xf0) << (12 - 4); - io_end = (word & 0xf000) | 0xfff; - update_res(info, io_base, io_end, IORESOURCE_IO, 0); - - pci_read_config_dword(dev, IOH_LMMIOL, &dword); - mmiol_base = (dword & 0xff00) << (24 - 8); - mmiol_end = (dword & 0xff000000) | 0xffffff; - update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0); - - pci_read_config_dword(dev, IOH_LMMIOH, &dword); - mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10); - mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff); - pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword); - mmioh_base |= ((u64)(dword & 0x7ffff)) << 32; - pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword); - mmioh_end |= ((u64)(dword & 0x7ffff)) << 32; - update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0); - - print_ioh_resources(info); -} - -/* intel IOH */ -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res); -- cgit v0.10.2 From a555f810af6d63ea5960abaed88e150ad95c3011 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 28 Jan 2010 16:18:15 -0500 Subject: Btrfs: Add mount -o compress-force The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 9f806dd..2aa8ec6 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1161,6 +1161,7 @@ struct btrfs_root { #define BTRFS_MOUNT_SSD_SPREAD (1 << 8) #define BTRFS_MOUNT_NOSSD (1 << 9) #define BTRFS_MOUNT_DISCARD (1 << 10) +#define BTRFS_MOUNT_FORCE_COMPRESS (1 << 11) #define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt) #define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b330e27c..f46c572 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -483,7 +483,8 @@ again: nr_pages_ret = 0; /* flag the file so we don't compress in the future */ - BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; + if (!btrfs_test_opt(root, FORCE_COMPRESS)) + BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; } if (will_compress) { *num_added += 1; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 3f9b457..8a1ea6e 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -66,7 +66,8 @@ enum { Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow, Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, - Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, + Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio, + Opt_flushoncommit, Opt_discard, Opt_err, }; @@ -82,6 +83,7 @@ static match_table_t tokens = { {Opt_alloc_start, "alloc_start=%s"}, {Opt_thread_pool, "thread_pool=%d"}, {Opt_compress, "compress"}, + {Opt_compress_force, "compress-force"}, {Opt_ssd, "ssd"}, {Opt_ssd_spread, "ssd_spread"}, {Opt_nossd, "nossd"}, @@ -173,6 +175,11 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) printk(KERN_INFO "btrfs: use compression\n"); btrfs_set_opt(info->mount_opt, COMPRESS); break; + case Opt_compress_force: + printk(KERN_INFO "btrfs: forcing compression\n"); + btrfs_set_opt(info->mount_opt, FORCE_COMPRESS); + btrfs_set_opt(info->mount_opt, COMPRESS); + break; case Opt_ssd: printk(KERN_INFO "btrfs: use ssd allocation scheme\n"); btrfs_set_opt(info->mount_opt, SSD); -- cgit v0.10.2 From b8d9bfeb18f9af794020d96e9bee984d18a8d737 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Dec 2009 06:54:17 +0000 Subject: Btrfs: remove tree_search() in extent_map.c This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index ccbdcb5..5a4f73b 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -155,20 +155,6 @@ static struct rb_node *__tree_search(struct rb_root *root, u64 offset, return NULL; } -/* - * look for an offset in the tree, and if it can't be found, return - * the first offset we can find smaller than 'offset'. - */ -static inline struct rb_node *tree_search(struct rb_root *root, u64 offset) -{ - struct rb_node *prev; - struct rb_node *ret; - ret = __tree_search(root, offset, &prev, NULL); - if (!ret) - return prev; - return ret; -} - /* check to see if two extent_map structs are adjacent and safe to merge */ static int mergable_maps(struct extent_map *prev, struct extent_map *next) { -- cgit v0.10.2 From d1ea6a61454e7d7ff0873d0ad1ae27d5807da0d3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 20 Jan 2010 07:28:54 +0000 Subject: Btrfs: Use correct values when updating inode i_size on fallocate commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f46c572..5606361 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5800,7 +5800,7 @@ out_fail: } static int prealloc_file_range(struct inode *inode, u64 start, u64 end, - u64 alloc_hint, int mode) + u64 alloc_hint, int mode, loff_t actual_len) { struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -5809,6 +5809,7 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, u64 cur_offset = start; u64 num_bytes = end - start; int ret = 0; + u64 i_size; while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); @@ -5847,8 +5848,12 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && cur_offset > inode->i_size) { - i_size_write(inode, cur_offset); - btrfs_ordered_update_i_size(inode, cur_offset, NULL); + if (cur_offset > actual_len) + i_size = actual_len; + else + i_size = cur_offset; + i_size_write(inode, i_size); + btrfs_ordered_update_i_size(inode, i_size, NULL); } ret = btrfs_update_inode(trans, root, inode); @@ -5941,7 +5946,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { ret = prealloc_file_range(inode, cur_offset, last_byte, - alloc_hint, mode); + alloc_hint, mode, offset+len); if (ret < 0) { free_extent_map(em); break; -- cgit v0.10.2 From f858153c367a397235d3e81136741e40e44faf1d Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Tue, 26 Jan 2010 00:48:23 +0000 Subject: Btrfs: fix a memory leak in btrfs_init_acl In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang Signed-off-by: Chris Mason diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index fa44e92..da3133c 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -269,6 +269,7 @@ int btrfs_init_acl(struct btrfs_trans_handle *trans, ACL_TYPE_ACCESS); } } + posix_acl_release(clone); } failed: posix_acl_release(acl); -- cgit v0.10.2 From e3acc2a6850efff647f1c5458524eb3a8bcba20a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 26 Jan 2010 14:30:53 +0000 Subject: Btrfs: run orphan cleanup on default fs root This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 009e3bd..87b2554 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1993,6 +1993,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!fs_info->fs_root) goto fail_trans_kthread; + if (!(sb->s_flags & MS_RDONLY)) { + down_read(&fs_info->cleanup_work_sem); + btrfs_orphan_cleanup(fs_info->fs_root); + up_read(&fs_info->cleanup_work_sem); + } + return tree_root; fail_trans_kthread: diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5606361..8cd1099 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3797,12 +3797,6 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) if (location.type == BTRFS_INODE_ITEM_KEY) { inode = btrfs_iget(dir->i_sb, &location, root); - if (unlikely(root->clean_orphans) && - !(inode->i_sb->s_flags & MS_RDONLY)) { - down_read(&root->fs_info->cleanup_work_sem); - btrfs_orphan_cleanup(root); - up_read(&root->fs_info->cleanup_work_sem); - } return inode; } -- cgit v0.10.2 From f48b90756bd834dda852ff514f2690d3175b1f44 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:07:59 +0000 Subject: Btrfs: do not mark the chunk as readonly if in degraded mode If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 220dad5..66122bd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2538,6 +2538,11 @@ int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset) if (!em) return 1; + if (btrfs_test_opt(root, DEGRADED)) { + free_extent_map(em); + return 0; + } + map = (struct map_lookup *)em->bdev; for (i = 0; i < map->num_stripes; i++) { if (!map->stripes[i].dev->writeable) { -- cgit v0.10.2 From 7f59203abeaf18bf3497b308891f95a4489810ad Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:09:00 +0000 Subject: Btrfs: check return value of open_bdev_exclusive properly Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 66122bd..5eb7459 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1434,8 +1434,8 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) return -EINVAL; bdev = open_bdev_exclusive(device_path, 0, root->fs_info->bdev_holder); - if (!bdev) - return -EIO; + if (IS_ERR(bdev)) + return PTR_ERR(bdev); if (root->fs_info->fs_devices->seeding) { seeding_dev = 1; -- cgit v0.10.2 From 035fe03a7ad56982b30ab3a522b7b08d58feccd0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:09:38 +0000 Subject: Btrfs: check total number of devices when removing missing If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 5eb7459..41ecbb2 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1135,7 +1135,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) root->fs_info->avail_metadata_alloc_bits; if ((all_avail & BTRFS_BLOCK_GROUP_RAID10) && - root->fs_info->fs_devices->rw_devices <= 4) { + root->fs_info->fs_devices->num_devices <= 4) { printk(KERN_ERR "btrfs: unable to go below four devices " "on raid10\n"); ret = -EINVAL; @@ -1143,7 +1143,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } if ((all_avail & BTRFS_BLOCK_GROUP_RAID1) && - root->fs_info->fs_devices->rw_devices <= 2) { + root->fs_info->fs_devices->num_devices <= 2) { printk(KERN_ERR "btrfs: unable to go below two " "devices on raid1\n"); ret = -EINVAL; -- cgit v0.10.2 From ba45d525748e969538c0ea3d491aa817d3be3af8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Jan 2010 22:15:55 +0000 Subject: [ARM] Update mach-types Signed-off-by: Russell King diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index c3a74ce..5a79fc6 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Dec 16 20:06:34 2009 +# Last update: Thu Jan 28 22:15:54 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2536,6 +2536,7 @@ davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 +dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552 bulldog MACH_BULLDOG BULLDOG 2553 derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 @@ -2555,6 +2556,7 @@ iseo MACH_ISEO ISEO 2568 cezanne MACH_CEZANNE CEZANNE 2569 lucca MACH_LUCCA LUCCA 2570 supersmart MACH_SUPERSMART SUPERSMART 2571 +arm11_board MACH_CS_MISANO CS_MISANO 2572 magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 emxx MACH_EMXX EMXX 2574 outlaw MACH_OUTLAW OUTLAW 2575 @@ -2578,3 +2580,59 @@ glacier MACH_GLACIER GLACIER 2592 phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 pca101 MACH_PCA101 PCA101 2595 +buzzc MACH_BUZZC BUZZC 2596 +sasie2 MACH_SASIE2 SASIE2 2597 +davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598 +smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599 +wzl6410 MACH_WZL6410 WZL6410 2600 +wzl6410m MACH_WZL6410M WZL6410M 2601 +wzl6410f MACH_WZL6410F WZL6410F 2602 +wzl6410i MACH_WZL6410I WZL6410I 2603 +spacecom1 MACH_SPACECOM1 SPACECOM1 2604 +pingu920 MACH_PINGU920 PINGU920 2605 +bravoc MACH_BRAVOC BRAVOC 2606 +cybo2440 MACH_CYBO2440 CYBO2440 2607 +vdssw MACH_VDSSW VDSSW 2608 +romulus MACH_ROMULUS ROMULUS 2609 +omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610 +eltd100 MACH_ELTD100 ELTD100 2611 +capc7117 MACH_CAPC7117 CAPC7117 2612 +swan MACH_SWAN SWAN 2613 +veu MACH_VEU VEU 2614 +rm2 MACH_RM2 RM2 2615 +tt2100 MACH_TT2100 TT2100 2616 +venice MACH_VENICE VENICE 2617 +pc7323 MACH_PC7323 PC7323 2618 +masp MACH_MASP MASP 2619 +fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620 +fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621 +lexikon MACH_LEXIKON LEXIKON 2622 +mini2440v2 MACH_MINI2440V2 MINI2440V2 2623 +icontrol MACH_ICONTROL ICONTROL 2624 +sheevad MACH_SHEEVAD SHEEVAD 2625 +qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626 +qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 +bee MACH_BEE BEE 2628 +mx23evk MACH_MX23EVK MX23EVK 2629 +ap4evb MACH_AP4EVB AP4EVB 2630 +stockholm MACH_STOCKHOLM STOCKHOLM 2631 +lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632 +stingray MACH_STINGRAY STINGRAY 2633 +kraken MACH_KRAKEN KRAKEN 2634 +gw2388 MACH_GW2388 GW2388 2635 +jadecpu MACH_JADECPU JADECPU 2636 +carlisle MACH_CARLISLE CARLISLE 2637 +lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638 +nemid_tb MACH_NEMID_TB NEMID_TB 2639 +terrier MACH_TERRIER TERRIER 2640 +turbot MACH_TURBOT TURBOT 2641 +sanddab MACH_SANDDAB SANDDAB 2642 +mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643 +ghi2703d MACH_GHI2703D GHI2703D 2644 +lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645 +lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646 +lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647 +hw90240 MACH_HW90240 HW90240 2648 +dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 +mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 +scat110 MACH_SCAT110 SCAT110 2651 -- cgit v0.10.2 From d291b9af1a1a12f59a464494900c6e0db26e2ec3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Jan 2010 21:36:21 -0800 Subject: be2net: Fix memset() arg ordering. Noticed by Ben Hutchings. Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 90c5661..6f26338 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2168,7 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; - memset(cmd->va, cmd->size, 0); + memset(cmd->va, 0, cmd->size); return 0; } -- cgit v0.10.2 From 71cc1fa9f2d71eb2eba9b8e71e27cff9863e55f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 28 Jan 2010 21:37:18 -0800 Subject: cdc_ether: Partially revert "usbnet: Set link down initially ..." Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings Tested-by: Avi Rozen Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 21e183a..4f27f02 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER | FLAG_LINK_INTR, + .flags = FLAG_ETHER, // .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind, -- cgit v0.10.2 From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 7311fdf..693eb9a 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -140,6 +140,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->devfn = devfn; dev->multifunction = 0; /* maybe a lie? */ dev->needs_freset = 0; /* pcie fundamental reset required */ + set_pcie_port_type(dev); dev->vendor = get_int_prop(node, "vendor-id", 0xffff); dev->device = get_int_prop(node, "device-id", 0xffff); @@ -164,6 +165,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; + set_pcie_hotplug_bridge(dev); } else if (!strcmp(type, "cardbus")) { dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; } else { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 98ffb2d..446e4a9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -681,7 +681,7 @@ static void pci_read_irq(struct pci_dev *dev) dev->irq = irq; } -static void set_pcie_port_type(struct pci_dev *pdev) +void set_pcie_port_type(struct pci_dev *pdev) { int pos; u16 reg16; @@ -695,7 +695,7 @@ static void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; } -static void set_pcie_hotplug_bridge(struct pci_dev *pdev) +void set_pcie_hotplug_bridge(struct pci_dev *pdev) { int pos; u16 reg16; diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e539..c1968f4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG -- cgit v0.10.2 From 26b4a0ca46985ae9586c194f7859f3838b1230f8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:05 +0000 Subject: powerpc/pci: Add missing hookup to pci_slot Add missing hookup to existing pci_slot when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 693eb9a..b6b2e86 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -123,6 +123,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, { struct pci_dev *dev; const char *type; + struct pci_slot *slot; dev = alloc_pci_dev(); if (!dev) @@ -142,6 +143,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->needs_freset = 0; /* pcie fundamental reset required */ set_pcie_port_type(dev); + list_for_each_entry(slot, &dev->bus->slots, list) + if (PCI_SLOT(dev->devfn) == slot->number) + dev->slot = slot; + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); dev->device = get_int_prop(node, "device-id", 0xffff); dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); -- cgit v0.10.2 From 94afc008e1e6fbadfac0b75fcf193b6d7074b2f1 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:05 +0000 Subject: powerpc/pci: Add missing call to header fixup Add missing call to pci_fixup_device(pci_fixup_early, ...) when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index b6b2e86..4aa1740 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -166,6 +166,9 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->error_state = pci_channel_io_normal; dev->dma_mask = 0xffffffff; + /* Early fixups, before probing the BARs */ + pci_fixup_device(pci_fixup_early, dev); + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; -- cgit v0.10.2 From d234b3c36ff600b2a51cff74c9263cba5b2c24ee Mon Sep 17 00:00:00 2001 From: Stef van Os Date: Wed, 20 Jan 2010 03:59:39 +0000 Subject: powerpc/4xx: Add pcix type 1 transactions Some of the newer 4xx pci cores need an explicit bit set to send type 1 transactions instead of just comparing the bus numbers. This patch enables type 1 transations for pcix nodes, thus enabling devices behind PCI bridges. Signed-off-by: Stef van Os Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 6ff9d71..8aa3302 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -569,7 +569,8 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np) hose->last_busno = bus_range ? bus_range[1] : 0xff; /* Setup config space */ - setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0); + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, + PPC_INDIRECT_TYPE_SET_CFG_TYPE); /* Disable all windows */ writel(0, reg + PCIX0_POM0SA); -- cgit v0.10.2 From 93fb84b50fe03aabca8d9dea5d3ba521a07e8571 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: Input: winbond-cir - remove dmesg spam MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman Cc: stable Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c index 33309fe..c8f5a9a 100644 --- a/drivers/input/misc/winbond-cir.c +++ b/drivers/input/misc/winbond-cir.c @@ -768,7 +768,7 @@ wbcir_parse_rc6(struct device *dev, struct wbcir_data *data) return; } - dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " + dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " "toggle %u mode %u scan 0x%08X\n", address, command, -- cgit v0.10.2 From cb6ecf6f7afece066265e243657b0ac28150a7b2 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 30b503b..86cb2d2 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -46,6 +46,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, ABS_MT_TRACKING_ID, + ABS_MT_PRESSURE, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; diff --git a/include/linux/input.h b/include/linux/input.h index 7be8a65..735ceaf 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -660,6 +660,7 @@ struct input_absinfo { #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) -- cgit v0.10.2 From f6bdc2303da6786cc22a7d24b6790e9f75b4cfdc Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:28 -0800 Subject: Input: update multi-touch protocol documentation This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index a12ea3b..8490480 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -27,12 +27,30 @@ set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The -minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and -ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the -device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size -of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The -ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which +allows for multiple fingers to be tracked. If the device supports it, the +ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size +of the contact area and approaching finger, respectively. + +The TOUCH and WIDTH parameters have a geometrical interpretation; imagine +looking through a window at someone gently holding a finger against the +glass. You will see two regions, one inner region consisting of the part +of the finger actually touching the glass, and one outer region formed by +the perimeter of the finger. The diameter of the inner region is the +ABS_MT_TOUCH_MAJOR, the diameter of the outer region is +ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder +against the glass. The inner region will increase, and in general, the +ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than +unity, is related to the finger pressure. For pressure-based devices, +ABS_MT_PRESSURE may be used to provide the pressure on the contact area +instead. + +In addition to the MAJOR parameters, the oval shape of the finger can be +described by adding the MINOR parameters, such that MAJOR and MINOR are the +major and minor axis of an ellipse. Finally, the orientation of the oval +shape can be describe with the ORIENTATION parameter. + +The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen or something else. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices @@ -42,11 +60,9 @@ report finger tracking from hardware [5]. Here is what a minimal event sequence for a two-finger touch would look like: - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT @@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates the notion of pressure. The fingers of the hand and the palm all have different characteristic widths [1]. +ABS_MT_PRESSURE + +The pressure, in arbitrary units, on the contact area. May be used instead +of TOUCH and WIDTH for pressure-based devices or any device with a spatial +signal intensity distribution. + ABS_MT_ORIENTATION The orientation of the ellipse. The value should describe a signed quarter @@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can make use of these native identifiers to reduce bandwidth and cpu usage. +Gestures +-------- + +In the specific application of creating gesture events, the TOUCH and WIDTH +parameters can be used to, e.g., approximate finger pressure or distinguish +between index finger and thumb. With the addition of the MINOR parameters, +one can also distinguish between a sweeping finger and a pointing finger, +and with ORIENTATION, one can detect twisting of fingers. + + Notes ----- -- cgit v0.10.2 From 66ddfc62caec65a25fd5a8b20f535a2958ee94e6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 28 Jan 2010 20:50:39 +0100 Subject: mx35: add a missing comma in a pad definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Tim Sander Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index 00b0ac1..c88d407 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -671,7 +671,7 @@ #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL) #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) -- cgit v0.10.2 From 3e59aaa7ae9de49af8810102f12857860d5bd0ed Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 29 Jan 2010 13:58:55 +0530 Subject: ASoC: AIC23: Fixing writes to non-existing registers in resume function Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23 register in resume function because of which register writes happen on some non-existing registers. Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index a9dc5fb..da589d8 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -627,7 +627,7 @@ static int tlv320aic23_resume(struct platform_device *pdev) u16 reg; /* Sync reg_cache with the hardware */ - for (reg = 0; reg < TLV320AIC23_RESET; reg++) { + for (reg = 0; reg <= TLV320AIC23_ACTIVE; reg++) { u16 val = tlv320aic23_read_reg_cache(codec, reg); tlv320aic23_write(codec, reg, val); } -- cgit v0.10.2 From 5bbd4953a4fb5d8d597b4a53b8da97eee320b634 Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 29 Jan 2010 15:49:22 +0530 Subject: ASoC: AM3517: ASoC driver not getting compiled Commit 761c9d45 (ASoC: Fix build of OMAP sound drivers) changes CONFIG_MACH_OMAP3517EVM -> CONFIG_SND_OMAP_SOC_OMAP3517EVM in the Makefile. Whereas the config option defined in Kconfig is SND_OMAP_SOC_AM3517EVM. Because of this, ASoC driver for AM3517 was not getting compiled. Signed-off-by: Anuj Aggarwal Signed-off-by: Mark Brown diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 3db8a6c..19283e5 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3517EVM) += snd-soc-am3517evm.o +obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o -- cgit v0.10.2 From 12b336a8b4ea8652372f88521bf55cef7f5d5283 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Jan 2010 20:43:21 +0000 Subject: wm97xx_battery: Handle missing platform data gracefully Don't unconditionally dereference the WM97xx core platform data since it may not be present, causing an oops. Signed-off-by: Mark Brown Signed-off-by: Anton Vorontsov diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index fa39e75..6ea3cb5 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -175,8 +175,14 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) dev_err(&dev->dev, "Do not pass platform_data through " "wm97xx_bat_set_pdata!\n"); return -EINVAL; - } else - pdata = wmdata->batt_pdata; + } + + if (!wmdata) { + dev_err(&dev->dev, "No platform data supplied\n"); + return -EINVAL; + } + + pdata = wmdata->batt_pdata; if (dev->id != -1) return -EINVAL; -- cgit v0.10.2 From 221af7f87b97431e3ee21ce4b0e77d5411cf1549 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jan 2010 22:14:42 -0800 Subject: Split 'flush_old_exec' into two functions 'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 31f80c6..ec79faf 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -368,7 +368,7 @@ void exit_thread(void) void flush_thread(void) { - /* Called by fs/exec.c (flush_old_exec) to remove traces of a + /* Called by fs/exec.c (setup_new_exec) to remove traces of a * previously running executable. */ #ifdef CONFIG_SH_FPU if (last_task_used_math == current) { diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 2a4d073..435d2a5 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -308,15 +308,17 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (retval) return retval; - regs->cs = __USER32_CS; - regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = - regs->r13 = regs->r14 = regs->r15 = 0; - /* OK, This is the point of no return */ set_personality(PER_LINUX); set_thread_flag(TIF_IA32); clear_thread_flag(TIF_ABI_PENDING); + setup_new_exec(bprm); + + regs->cs = __USER32_CS; + regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = + regs->r13 = regs->r14 = regs->r15 = 0; + current->mm->end_code = ex.a_text + (current->mm->start_code = N_TXTADDR(ex)); current->mm->end_data = ex.a_data + diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index 346b694..fdd3970 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -264,6 +264,7 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) #else set_personality(PER_LINUX); #endif + setup_new_exec(bprm); current->mm->end_code = ex.a_text + (current->mm->start_code = N_TXTADDR(ex)); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index edd90c4..fd5b2ea 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -662,27 +662,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0') goto out_free_interp; - /* - * The early SET_PERSONALITY here is so that the lookup - * for the interpreter happens in the namespace of the - * to-be-execed image. SET_PERSONALITY can select an - * alternate root. - * - * However, SET_PERSONALITY is NOT allowed to switch - * this task into the new images's memory mapping - * policy - that is, TASK_SIZE must still evaluate to - * that which is appropriate to the execing application. - * This is because exit_mmap() needs to have TASK_SIZE - * evaluate to the size of the old image. - * - * So if (say) a 64-bit application is execing a 32-bit - * application it is the architecture's responsibility - * to defer changing the value of TASK_SIZE until the - * switch really is going to happen - do this in - * flush_thread(). - akpm - */ - SET_PERSONALITY(loc->elf_ex); - interpreter = open_exec(elf_interpreter); retval = PTR_ERR(interpreter); if (IS_ERR(interpreter)) @@ -730,9 +709,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* Verify the interpreter has a valid arch */ if (!elf_check_arch(&loc->interp_elf_ex)) goto out_free_dentry; - } else { - /* Executables without an interpreter also need a personality */ - SET_PERSONALITY(loc->elf_ex); } /* Flush all traces of the currently running executable */ @@ -752,7 +728,8 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) current->flags |= PF_RANDOMIZE; - arch_pick_mmap_layout(current->mm); + + setup_new_exec(bprm); /* Do this so that we can load the interpreter, if need be. We will change some of these later */ diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index c57d9ce..18d7729 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -321,6 +321,9 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, set_personality(PER_LINUX_FDPIC); if (elf_read_implies_exec(&exec_params.hdr, executable_stack)) current->personality |= READ_IMPLIES_EXEC; + + setup_new_exec(bprm); + set_binfmt(&elf_fdpic_format); current->mm->start_code = 0; diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index d4a00ea..42c6b4a 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -519,6 +519,7 @@ static int load_flat_file(struct linux_binprm * bprm, /* OK, This is the point of no return */ set_personality(PER_LINUX_32BIT); + setup_new_exec(bprm); } /* diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c index 2a9b533..cc8560f 100644 --- a/fs/binfmt_som.c +++ b/fs/binfmt_som.c @@ -227,6 +227,7 @@ load_som_binary(struct linux_binprm * bprm, struct pt_regs * regs) /* OK, This is the point of no return */ current->flags &= ~PF_FORKNOEXEC; current->personality = PER_HPUX; + setup_new_exec(bprm); /* Set the task size for HP-UX processes such that * the gateway page is outside the address space. diff --git a/fs/exec.c b/fs/exec.c index 632b02e..675c3f4 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -941,9 +941,7 @@ void set_task_comm(struct task_struct *tsk, char *buf) int flush_old_exec(struct linux_binprm * bprm) { - char * name; - int i, ch, retval; - char tcomm[sizeof(current->comm)]; + int retval; /* * Make sure we have a private signal table and that @@ -963,6 +961,20 @@ int flush_old_exec(struct linux_binprm * bprm) goto out; bprm->mm = NULL; /* We're using it now */ + return 0; + +out: + return retval; +} +EXPORT_SYMBOL(flush_old_exec); + +void setup_new_exec(struct linux_binprm * bprm) +{ + int i, ch; + char * name; + char tcomm[sizeof(current->comm)]; + + arch_pick_mmap_layout(current->mm); /* This is the point of no return */ current->sas_ss_sp = current->sas_ss_size = 0; @@ -1019,14 +1031,8 @@ int flush_old_exec(struct linux_binprm * bprm) flush_signal_handlers(current, 0); flush_old_files(current->files); - - return 0; - -out: - return retval; } - -EXPORT_SYMBOL(flush_old_exec); +EXPORT_SYMBOL(setup_new_exec); /* * Prepare credentials and lock ->cred_guard_mutex. diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index cd4349b..89c6249 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -109,6 +109,7 @@ extern int prepare_binprm(struct linux_binprm *); extern int __must_check remove_arg_zero(struct linux_binprm *); extern int search_binary_handler(struct linux_binprm *,struct pt_regs *); extern int flush_old_exec(struct linux_binprm * bprm); +extern void setup_new_exec(struct linux_binprm * bprm); extern int suid_dumpable; #define SUID_DUMP_DISABLE 0 /* No setuid dumping */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 6f7bba9..abdfacc 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1369,7 +1369,7 @@ struct task_struct { char comm[TASK_COMM_LEN]; /* executable name excluding path - access with [gs]et_task_comm (which lock it with task_lock()) - - initialized normally by flush_old_exec */ + - initialized normally by setup_new_exec */ /* file system info */ int link_count, total_link_count; #ifdef CONFIG_SYSVIPC -- cgit v0.10.2 From 05d43ed8a89c159ff641d472f970e3f1baa66318 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 28 Jan 2010 22:14:43 -0800 Subject: x86: get rid of the insane TIF_ABI_PENDING bit Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 435d2a5..f9f4724 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -311,7 +311,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* OK, This is the point of no return */ set_personality(PER_LINUX); set_thread_flag(TIF_IA32); - clear_thread_flag(TIF_ABI_PENDING); setup_new_exec(bprm); diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index b4501ee..1994d3f 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -181,14 +181,8 @@ do { \ void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp); #define compat_start_thread start_thread_ia32 -#define COMPAT_SET_PERSONALITY(ex) \ -do { \ - if (test_thread_flag(TIF_IA32)) \ - clear_thread_flag(TIF_ABI_PENDING); \ - else \ - set_thread_flag(TIF_ABI_PENDING); \ - current->personality |= force_personality32; \ -} while (0) +void set_personality_ia32(void); +#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32() #define COMPAT_ELF_PLATFORM ("i686") diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 375c917..e0d2890 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -87,7 +87,6 @@ struct thread_info { #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 #define TIF_MEMDIE 20 #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ @@ -112,7 +111,6 @@ struct thread_info { #define _TIF_NOTSC (1 << TIF_NOTSC) #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) #define _TIF_FREEZE (1 << TIF_FREEZE) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 02c3ee0..c9b3522 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -115,18 +115,6 @@ void flush_thread(void) { struct task_struct *tsk = current; -#ifdef CONFIG_X86_64 - if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) { - clear_tsk_thread_flag(tsk, TIF_ABI_PENDING); - if (test_tsk_thread_flag(tsk, TIF_IA32)) { - clear_tsk_thread_flag(tsk, TIF_IA32); - } else { - set_tsk_thread_flag(tsk, TIF_IA32); - current_thread_info()->status |= TS_COMPAT; - } - } -#endif - flush_ptrace_hw_breakpoint(tsk); memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index f9e0331..41a26a8 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -521,6 +521,17 @@ void set_personality_64bit(void) current->personality &= ~READ_IMPLIES_EXEC; } +void set_personality_ia32(void) +{ + /* inherit personality from parent */ + + /* Make sure to be in 32bit mode */ + set_thread_flag(TIF_IA32); + + /* Prepare the first "return" to user space */ + current_thread_info()->status |= TS_COMPAT; +} + unsigned long get_wchan(struct task_struct *p) { unsigned long stack; -- cgit v0.10.2 From 94673e968cbcce07fa78dac4b0ae05d24b5816e1 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 28 Jan 2010 21:42:02 -0800 Subject: sparc: TIF_ABI_PENDING bit removal Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index ff66bb8..e678803 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -195,17 +195,10 @@ static inline unsigned int sparc64_elf_hwcap(void) #define ELF_PLATFORM (NULL) #define SET_PERSONALITY(ex) \ -do { unsigned long new_flags = current_thread_info()->flags; \ - new_flags &= _TIF_32BIT; \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags |= _TIF_32BIT; \ +do { if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_32BIT); \ else \ - new_flags &= ~_TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ - else \ - clear_thread_flag(TIF_ABI_PENDING); \ + clear_thread_flag(TIF_32BIT); \ /* flush_thread will update pgd cache */ \ if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX | \ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 7257ebb..39be9f2 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -228,12 +228,11 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define TIF_SECCOMP 9 /* secure computing */ #define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */ #define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ -/* flag bit 11 is available */ /* NOTE: Thread flags >= 12 should be ones we have no interest * in using in assembly, else we can't use the mask as * an immediate value in instructions such as andcc. */ -#define TIF_ABI_PENDING 12 +/* flag bit 12 is available */ #define TIF_MEMDIE 13 #define TIF_POLLING_NRFLAG 14 #define TIF_FREEZE 15 /* is freezing for suspend */ @@ -248,7 +247,6 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define _TIF_SECCOMP (1<task->mm; if (mm) tsb_context_switch(mm); -- cgit v0.10.2 From a7016235a61d520e6806f38129001d935c4b6661 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 29 Jan 2010 17:46:34 +0000 Subject: mm: fix migratetype bug which slowed swapping After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins Acked-by: Mel Gorman Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d2a8889..8deb9d0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -556,8 +556,9 @@ static void free_pcppages_bulk(struct zone *zone, int count, page = list_entry(list->prev, struct page, lru); /* must delete as __free_one_page list manipulates */ list_del(&page->lru); - __free_one_page(page, zone, 0, migratetype); - trace_mm_page_pcpu_drain(page, 0, migratetype); + /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */ + __free_one_page(page, zone, 0, page_private(page)); + trace_mm_page_pcpu_drain(page, 0, page_private(page)); } while (--count && --batch_free && !list_empty(list)); } spin_unlock(&zone->lock); -- cgit v0.10.2 From 4995c0b3673c6be76e54b2c89479b1cdf29e69ca Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Sun, 24 Jan 2010 00:20:20 +0300 Subject: mfd: Fix asic3 build asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8f0d184..e09eb48 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_MFD_SM501) += sm501.o -obj-$(CONFIG_MFD_ASIC3) += asic3.o +obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o -- cgit v0.10.2 From 7415c7602ddb14a9a9c39bc8c38afa667092a527 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 29 Jan 2010 06:51:08 -0300 Subject: V4L/DVB: saa7134: remove stray unlock_kernel An earlier commit removed the lock_kernel/unlock_kernel pair but forgot to remove the unlock_kernel call in the cleanup path at the end of the function. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 7dfecfc..ee5bff0 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -93,9 +93,9 @@ static int ts_open(struct file *file) dprintk("open dev=%s\n", video_device_node_name(vdev)); err = -EBUSY; if (!mutex_trylock(&dev->empress_tsq.vb_lock)) - goto done; + return err; if (atomic_read(&dev->empress_users)) - goto done_up; + goto done; /* Unmute audio */ saa_writeb(SAA7134_AUDIO_MUTE_CTRL, @@ -105,10 +105,8 @@ static int ts_open(struct file *file) file->private_data = dev; err = 0; -done_up: - mutex_unlock(&dev->empress_tsq.vb_lock); done: - unlock_kernel(); + mutex_unlock(&dev->empress_tsq.vb_lock); return err; } -- cgit v0.10.2 From abe94c756c08d50566c09a65b9c7fe72f83071c5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Jan 2010 13:57:50 -0800 Subject: Linux 2.6.33-rc6 diff --git a/Makefile b/Makefile index 67d6cff..394aec7 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v0.10.2 From 9198bcd39f558dd56823f1c9983e2252fc99a501 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: omap: define _toggle_gpio_edge_triggering only for OMAP1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The only usage of _toggle_gpio_edge_triggering is in an #ifdef CONFIG_ARCH_OMAP1 block, so only provide it if CONFIG_ARCH_OMAP1 is defined, too. This fixes a compiler warning: arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4. Signed-off-by: Uwe Kleine-König Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d17620c..d2422c7 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } #endif +#ifdef CONFIG_ARCH_OMAP1 /* * This only applies to chips that can't do both rising and falling edge * detection at once. For all other chips, this function is a noop. @@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) u32 l = 0; switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; break; -#endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; @@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) __raw_writel(l, reg); } +#endif static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { -- cgit v0.10.2 From 643ced9b0b4810b5725910667604f1a373f30f2f Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 28 Jan 2010 01:05:09 +0800 Subject: drm/i915: don't trigger ironlake vblank interrupt at irq install Zhenyu noticed that the ironlake vblank enabling patch has one issue that it will trigger vblank starting from irq postinstall, this isn't necessary. This patch addresses this issue by only adding the vblank into DEIER but mask them in DEIMR, so that it won't trigger vblank interrupt at irq install. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index e7472d8..fcd87ad 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1022,14 +1022,13 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | - DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; dev_priv->irq_mask_reg = ~display_mask; - dev_priv->de_irq_enable_reg = display_mask; + dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; /* should always can generate irq */ I915_WRITE(DEIIR, I915_READ(DEIIR)); -- cgit v0.10.2 From 2dd873838805a6e84c1afdfbf13e8709bfb5c70f Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 27 Jan 2010 16:32:46 +0800 Subject: drm/i915: Add support for SDVO composite TV Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index eaacfd0..82678d3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2345,6 +2345,14 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags) connector->connector_type = DRM_MODE_CONNECTOR_VGA; intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) | (1 << INTEL_ANALOG_CLONE_BIT); + } else if (flags & SDVO_OUTPUT_CVBS0) { + + sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0; + encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; + connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT; } else if (flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; -- cgit v0.10.2 From f034b12dbb5749b11e9390e15e93ffa87ece8038 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 21 Jan 2010 15:20:18 +0800 Subject: drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop Signed-off-by: Zhao Yakui Reported-by: Philipp Kohlbecher Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index aa74e59..75a9772 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -611,7 +611,7 @@ static const struct dmi_system_id bad_lid_status[] = { { .ident = "Samsung SX20S", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), DMI_MATCH(DMI_BOARD_NAME, "SX20S"), }, }, -- cgit v0.10.2 From 013d5aa2bbb2ceacba7a0dad7f2a0eb20133323f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 29 Jan 2010 11:18:31 -0800 Subject: drm/i915: page flip support for Ironlake This patch adds support for page flipping on Ironlake, which uses different interrupt bits for triggering flip submit IRQs. Signed-off-by: Jesse Barnes [anholt: hand-resolved for rebasing off of render power saving patch] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fcd87ad..50ddf4a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,11 +309,21 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); - if (de_iir & DE_PIPEA_VBLANK) + if (de_iir & DE_PLANEA_FLIP_DONE) + intel_prepare_page_flip(dev, 0); + + if (de_iir & DE_PLANEB_FLIP_DONE) + intel_prepare_page_flip(dev, 1); + + if (de_iir & DE_PIPEA_VBLANK) { drm_handle_vblank(dev, 0); + intel_finish_page_flip(dev, 0); + } - if (de_iir & DE_PIPEB_VBLANK) + if (de_iir & DE_PIPEB_VBLANK) { drm_handle_vblank(dev, 1); + intel_finish_page_flip(dev, 1); + } /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && @@ -1022,7 +1032,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; -- cgit v0.10.2 From 7c099ce1575126395f186ecf58b51a60d5c3be7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Thu, 28 Jan 2010 21:02:54 +0100 Subject: x86: Add quirk for Intel DG45FC board to avoid low memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 6aa542a694dc9ea4344a8a590d2628c33d1b9431 added a quirk for the Intel DG45ID board due to low memory corruption. The Intel DG45FC shares the same BIOS (and the same bug) as noted in: http://bugzilla.kernel.org/show_bug.cgi?id=13736 Signed-off-by: David Härdeman LKML-Reference: <20100128200254.GA9134@hardeman.nu> Cc: Cc: Alexey Fisher Cc: ykzhao Cc: Tony Bones Cc: Ingo Molnar Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index f7b8b98..5d9e40c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -642,19 +642,27 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), }, }, - { /* - * AMI BIOS with low memory corruption was found on Intel DG45ID board. - * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will + * AMI BIOS with low memory corruption was found on Intel DG45ID and + * DG45FC boards. + * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will * match only DMI_BOARD_NAME and see if there is more bad products * with this vendor. */ + { .callback = dmi_low_memory_corruption, .ident = "AMI BIOS", .matches = { DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), }, }, + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "DG45FC"), + }, + }, #endif {} }; -- cgit v0.10.2 From cc0967490c1c3824bc5b75718b6ca8a51d9f2617 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 28 Jan 2010 17:04:42 -0600 Subject: x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API In the 2.6.33 kernel, the hw_breakpoint API is now used for the performance event counters. The hw_breakpoint_handler() now consumes the hw breakpoints that were previously set by kgdb arch specific code. In order for kgdb to work in conjunction with this core API change, kgdb must use some of the low level functions of the hw_breakpoint API to install, uninstall, and deal with hw breakpoint reservations. The kgdb core required a change to call kgdb_disable_hw_debug anytime a slave cpu enters kgdb_wait() in order to keep all the hw breakpoints in sync as well as to prevent hitting a hw breakpoint while kgdb is active. During the architecture specific initialization of kgdb, it will pre-allocate 4 disabled (struct perf event **) structures. Kgdb will use these to manage the capabilities for the 4 hw breakpoint registers, per cpu. Right now the hw_breakpoint API does not have a way to ask how many breakpoints are available, on each CPU so it is possible that the install of a breakpoint might fail when kgdb restores the system to the run state. The intent of this patch is to first get the basic functionality of hw breakpoints working and leave it to the person debugging the kernel to understand what hw breakpoints are in use and what restrictions have been imposed as a result. Breakpoint constraints will be dealt with in a future patch. While atomic, the x86 specific kgdb code will call arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint() to manage the cpu specific hw breakpoints. The net result of these changes allow kgdb to use the same pool of hw_breakpoints that are used by the perf event API, but neither knows about future reservations for the available hw breakpoint slots. Signed-off-by: Jason Wessel Acked-by: Frederic Weisbecker Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad Cc: Peter Zijlstra Cc: Alan Stern Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index dd74fe72..62bea73 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -204,40 +205,38 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) static struct hw_breakpoint { unsigned enabled; - unsigned type; - unsigned len; unsigned long addr; + int len; + int type; + struct perf_event **pev; } breakinfo[4]; static void kgdb_correct_hw_break(void) { - unsigned long dr7; - int correctit = 0; - int breakbit; int breakno; - get_debugreg(dr7, 7); for (breakno = 0; breakno < 4; breakno++) { - breakbit = 2 << (breakno << 1); - if (!(dr7 & breakbit) && breakinfo[breakno].enabled) { - correctit = 1; - dr7 |= breakbit; - dr7 &= ~(0xf0000 << (breakno << 2)); - dr7 |= ((breakinfo[breakno].len << 2) | - breakinfo[breakno].type) << - ((breakno << 2) + 16); - set_debugreg(breakinfo[breakno].addr, breakno); - - } else { - if ((dr7 & breakbit) && !breakinfo[breakno].enabled) { - correctit = 1; - dr7 &= ~breakbit; - dr7 &= ~(0xf0000 << (breakno << 2)); - } - } + struct perf_event *bp; + struct arch_hw_breakpoint *info; + int val; + int cpu = raw_smp_processor_id(); + if (!breakinfo[breakno].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu); + info = counter_arch_bp(bp); + if (bp->attr.disabled != 1) + continue; + bp->attr.bp_addr = breakinfo[breakno].addr; + bp->attr.bp_len = breakinfo[breakno].len; + bp->attr.bp_type = breakinfo[breakno].type; + info->address = breakinfo[breakno].addr; + info->len = breakinfo[breakno].len; + info->type = breakinfo[breakno].type; + val = arch_install_hw_breakpoint(bp); + if (!val) + bp->attr.disabled = 0; } - if (correctit) - set_debugreg(dr7, 7); + hw_breakpoint_restore(); } static int @@ -259,15 +258,23 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) static void kgdb_remove_all_hw_break(void) { int i; + int cpu = raw_smp_processor_id(); + struct perf_event *bp; - for (i = 0; i < 4; i++) - memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint)); + for (i = 0; i < 4; i++) { + if (!breakinfo[i].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[i].pev, cpu); + if (bp->attr.disabled == 1) + continue; + arch_uninstall_hw_breakpoint(bp); + bp->attr.disabled = 1; + } } static int kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { - unsigned type; int i; for (i = 0; i < 4; i++) @@ -278,27 +285,38 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) switch (bptype) { case BP_HARDWARE_BREAKPOINT: - type = 0; - len = 1; + len = 1; + breakinfo[i].type = X86_BREAKPOINT_EXECUTE; break; case BP_WRITE_WATCHPOINT: - type = 1; + breakinfo[i].type = X86_BREAKPOINT_WRITE; break; case BP_ACCESS_WATCHPOINT: - type = 3; + breakinfo[i].type = X86_BREAKPOINT_RW; break; default: return -1; } - - if (len == 1 || len == 2 || len == 4) - breakinfo[i].len = len - 1; - else + switch (len) { + case 1: + breakinfo[i].len = X86_BREAKPOINT_LEN_1; + break; + case 2: + breakinfo[i].len = X86_BREAKPOINT_LEN_2; + break; + case 4: + breakinfo[i].len = X86_BREAKPOINT_LEN_4; + break; +#ifdef CONFIG_X86_64 + case 8: + breakinfo[i].len = X86_BREAKPOINT_LEN_8; + break; +#endif + default: return -1; - - breakinfo[i].enabled = 1; + } breakinfo[i].addr = addr; - breakinfo[i].type = type; + breakinfo[i].enabled = 1; return 0; } @@ -313,8 +331,21 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) */ void kgdb_disable_hw_debug(struct pt_regs *regs) { + int i; + int cpu = raw_smp_processor_id(); + struct perf_event *bp; + /* Disable hardware debugging while we are in kgdb: */ set_debugreg(0UL, 7); + for (i = 0; i < 4; i++) { + if (!breakinfo[i].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[i].pev, cpu); + if (bp->attr.disabled == 1) + continue; + arch_uninstall_hw_breakpoint(bp); + bp->attr.disabled = 1; + } } /** @@ -378,7 +409,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, struct pt_regs *linux_regs) { unsigned long addr; - unsigned long dr6; char *ptr; int newPC; @@ -404,20 +434,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, raw_smp_processor_id()); } - get_debugreg(dr6, 6); - if (!(dr6 & 0x4000)) { - int breakno; - - for (breakno = 0; breakno < 4; breakno++) { - if (dr6 & (1 << breakno) && - breakinfo[breakno].type == 0) { - /* Set restore flag: */ - linux_regs->flags |= X86_EFLAGS_RF; - break; - } - } - } - set_debugreg(0UL, 6); kgdb_correct_hw_break(); return 0; @@ -485,8 +501,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) break; case DIE_DEBUG: - if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id()) { + if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { if (user_mode(regs)) return single_step_cont(regs, args); break; @@ -539,7 +554,42 @@ static struct notifier_block kgdb_notifier = { */ int kgdb_arch_init(void) { - return register_die_notifier(&kgdb_notifier); + int i, cpu; + int ret; + struct perf_event_attr attr; + struct perf_event **pevent; + + ret = register_die_notifier(&kgdb_notifier); + if (ret != 0) + return ret; + /* + * Pre-allocate the hw breakpoint structions in the non-atomic + * portion of kgdb because this operation requires mutexs to + * complete. + */ + attr.bp_addr = (unsigned long)kgdb_arch_init; + attr.type = PERF_TYPE_BREAKPOINT; + attr.bp_len = HW_BREAKPOINT_LEN_1; + attr.bp_type = HW_BREAKPOINT_W; + attr.disabled = 1; + for (i = 0; i < 4; i++) { + breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL); + if (IS_ERR(breakinfo[i].pev)) { + printk(KERN_ERR "kgdb: Could not allocate hw breakpoints\n"); + breakinfo[i].pev = NULL; + kgdb_arch_exit(); + return -1; + } + for_each_online_cpu(cpu) { + pevent = per_cpu_ptr(breakinfo[i].pev, cpu); + pevent[0]->hw.sample_period = 1; + if (pevent[0]->destroy != NULL) { + pevent[0]->destroy = NULL; + release_bp_slot(*pevent); + } + } + } + return ret; } /** @@ -550,6 +600,13 @@ int kgdb_arch_init(void) */ void kgdb_arch_exit(void) { + int i; + for (i = 0; i < 4; i++) { + if (breakinfo[i].pev) { + unregister_wide_hw_breakpoint(breakinfo[i].pev); + breakinfo[i].pev = NULL; + } + } unregister_die_notifier(&kgdb_notifier); } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 2eb517e..c7ade62 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -583,6 +583,9 @@ static void kgdb_wait(struct pt_regs *regs) smp_wmb(); atomic_set(&cpu_in_kgdb[cpu], 1); + /* Disable any cpu specific hw breakpoints */ + kgdb_disable_hw_debug(regs); + /* Wait till primary CPU is done with debugging */ while (atomic_read(&passive_cpu_wait[cpu])) cpu_relax(); -- cgit v0.10.2 From 5352ae638e2d7d5c9b2e4d528676bbf2af6fd6f3 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 28 Jan 2010 17:04:43 -0600 Subject: perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger This patch fixes the regression in functionality where the kernel debugger and the perf API do not nicely share hw breakpoint reservations. The kernel debugger cannot use any mutex_lock() calls because it can start the kernel running from an invalid context. A mutex free version of the reservation API needed to get created for the kernel debugger to safely update hw breakpoint reservations. The possibility for a breakpoint reservation to be concurrently processed at the time that kgdb interrupts the system is improbable. Should this corner case occur the end user is warned, and the kernel debugger will prohibit updating the hardware breakpoint reservations. Any time the kernel debugger reserves a hardware breakpoint it will be a system wide reservation. Signed-off-by: Jason Wessel Acked-by: Frederic Weisbecker Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad Cc: Peter Zijlstra Cc: Alan Stern Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 62bea73..bfba601 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -239,6 +239,49 @@ static void kgdb_correct_hw_break(void) hw_breakpoint_restore(); } +static int hw_break_reserve_slot(int breakno) +{ + int cpu; + int cnt = 0; + struct perf_event **pevent; + + for_each_online_cpu(cpu) { + cnt++; + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + if (dbg_reserve_bp_slot(*pevent)) + goto fail; + } + + return 0; + +fail: + for_each_online_cpu(cpu) { + cnt--; + if (!cnt) + break; + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + dbg_release_bp_slot(*pevent); + } + return -1; +} + +static int hw_break_release_slot(int breakno) +{ + struct perf_event **pevent; + int cpu; + + for_each_online_cpu(cpu) { + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + if (dbg_release_bp_slot(*pevent)) + /* + * The debugger is responisble for handing the retry on + * remove failure. + */ + return -1; + } + return 0; +} + static int kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { @@ -250,6 +293,10 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) if (i == 4) return -1; + if (hw_break_release_slot(i)) { + printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr); + return -1; + } breakinfo[i].enabled = 0; return 0; @@ -316,6 +363,10 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) return -1; } breakinfo[i].addr = addr; + if (hw_break_reserve_slot(i)) { + breakinfo[i].addr = 0; + return -1; + } breakinfo[i].enabled = 1; return 0; diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 41235c9..070ba06 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -75,6 +75,8 @@ extern int __register_perf_hw_breakpoint(struct perf_event *bp); extern void unregister_hw_breakpoint(struct perf_event *bp); extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events); +extern int dbg_reserve_bp_slot(struct perf_event *bp); +extern int dbg_release_bp_slot(struct perf_event *bp); extern int reserve_bp_slot(struct perf_event *bp); extern void release_bp_slot(struct perf_event *bp); diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index c030ae6..8a5c7d5 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -243,38 +243,70 @@ static void toggle_bp_slot(struct perf_event *bp, bool enable) * ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *)) * + max(per_cpu(nr_task_bp_pinned, *))) < HBP_NUM */ -int reserve_bp_slot(struct perf_event *bp) +static int __reserve_bp_slot(struct perf_event *bp) { struct bp_busy_slots slots = {0}; - int ret = 0; - - mutex_lock(&nr_bp_mutex); fetch_bp_busy_slots(&slots, bp); /* Flexible counters need to keep at least one slot */ - if (slots.pinned + (!!slots.flexible) == HBP_NUM) { - ret = -ENOSPC; - goto end; - } + if (slots.pinned + (!!slots.flexible) == HBP_NUM) + return -ENOSPC; toggle_bp_slot(bp, true); -end: + return 0; +} + +int reserve_bp_slot(struct perf_event *bp) +{ + int ret; + + mutex_lock(&nr_bp_mutex); + + ret = __reserve_bp_slot(bp); + mutex_unlock(&nr_bp_mutex); return ret; } +static void __release_bp_slot(struct perf_event *bp) +{ + toggle_bp_slot(bp, false); +} + void release_bp_slot(struct perf_event *bp) { mutex_lock(&nr_bp_mutex); - toggle_bp_slot(bp, false); + __release_bp_slot(bp); mutex_unlock(&nr_bp_mutex); } +/* + * Allow the kernel debugger to reserve breakpoint slots without + * taking a lock using the dbg_* variant of for the reserve and + * release breakpoint slots. + */ +int dbg_reserve_bp_slot(struct perf_event *bp) +{ + if (mutex_is_locked(&nr_bp_mutex)) + return -1; + + return __reserve_bp_slot(bp); +} + +int dbg_release_bp_slot(struct perf_event *bp) +{ + if (mutex_is_locked(&nr_bp_mutex)) + return -1; + + __release_bp_slot(bp); + + return 0; +} int register_perf_hw_breakpoint(struct perf_event *bp) { -- cgit v0.10.2 From fcafde2e6d81aa7901f9b10e6a097592f0637b79 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 22 Dec 2009 15:58:08 +0200 Subject: Bluetooth: Remove double free of SKB pointer in L2CAP Trivial fix for double free of SKB pointer with kfree_skb to make code simplier and cleaner. Remove unused variable err. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 1120cf1..8acc19e 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3518,7 +3518,6 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk struct l2cap_pinfo *pi; u16 control, len; u8 tx_seq; - int err; sk = l2cap_get_chan_by_scid(&conn->chan_list, cid); if (!sk) { @@ -3570,13 +3569,11 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk goto drop; if (__is_iframe(control)) - err = l2cap_data_channel_iframe(sk, control, skb); + l2cap_data_channel_iframe(sk, control, skb); else - err = l2cap_data_channel_sframe(sk, control, skb); + l2cap_data_channel_sframe(sk, control, skb); - if (!err) - goto done; - break; + goto done; case L2CAP_MODE_STREAMING: control = get_unaligned_le16(skb->data); @@ -3602,7 +3599,7 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk else pi->expected_tx_seq = tx_seq + 1; - err = l2cap_sar_reassembly_sdu(sk, skb, control); + l2cap_sar_reassembly_sdu(sk, skb, control); goto done; -- cgit v0.10.2 From e420aba331f44de0eed6871441293a6124d566d1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 23 Dec 2009 13:07:14 +0200 Subject: Bluetooth: Fix memory leak in L2CAP Move skb_clone after error confition check so it is not going potentially out of the scope. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 8acc19e..400efa2 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1368,7 +1368,6 @@ static int l2cap_ertm_send(struct sock *sk) while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) && !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) { - tx_skb = skb_clone(skb, GFP_ATOMIC); if (pi->remote_max_tx && bt_cb(skb)->retries == pi->remote_max_tx) { @@ -1376,6 +1375,8 @@ static int l2cap_ertm_send(struct sock *sk) break; } + tx_skb = skb_clone(skb, GFP_ATOMIC); + bt_cb(skb)->retries++; control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE); -- cgit v0.10.2 From 7427847d2d044d85f478757ea03165ae3cfe87c4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Sep 2009 13:43:49 -0400 Subject: Bluetooth: Redo checks in IRQ handler for shared IRQ support Commit ac019360fe3 changed the irq handler logic to BUG_ON rather than returning IRQ_NONE when the incoming argument is invalid. While this works in most cases, it doesn't work when the IRQ is shared with other devices (or when DEBUG_SHIRQ is enabled). So revert the previous change and replace the warning message with a comment explaining that we want this behavior. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 2acdc60..c2cf811 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -503,7 +503,9 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) unsigned int iobase; unsigned char reg; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index d814a27..9f5926a 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -345,7 +345,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) int iir; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index d339464..91c5230 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -295,7 +295,9 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 4f02a6f..6975919 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -299,7 +299,9 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; -- cgit v0.10.2 From 9670d80a9a6e24725c4111bef5d6cc7786ad0dc5 Mon Sep 17 00:00:00 2001 From: Vikram Kandukuri Date: Wed, 6 Jan 2010 19:04:15 +0530 Subject: Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Signed-off-by: Vikram Kandukuri Signed-off-by: Alicke Xu Reviewed-by: Luis R. Rodriguez Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 652367a..058fbcc 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -195,5 +195,16 @@ config BT_MRVL_SDIO Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. -endmenu +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index b3f57d2..7e5aed5 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o +obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c new file mode 100644 index 0000000..add9485 --- /dev/null +++ b/drivers/bluetooth/ath3k.c @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VERSION "1.0" + + +static struct usb_device_id ath3k_table[] = { + /* Atheros AR3011 */ + { USB_DEVICE(0x0CF3, 0x3000) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ath3k_table); + +#define USB_REQ_DFU_DNLOAD 1 +#define BULK_SIZE 4096 + +struct ath3k_data { + struct usb_device *udev; + u8 *fw_data; + u32 fw_size; + u32 fw_sent; +}; + +static int ath3k_load_firmware(struct ath3k_data *data, + unsigned char *firmware, + int count) +{ + u8 *send_buf; + int err, pipe, len, size, sent = 0; + + BT_DBG("ath3k %p udev %p", data, data->udev); + + pipe = usb_sndctrlpipe(data->udev, 0); + + if ((usb_control_msg(data->udev, pipe, + USB_REQ_DFU_DNLOAD, + USB_TYPE_VENDOR, 0, 0, + firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + BT_ERR("Can't change to loading configuration err"); + return -EBUSY; + } + sent += 20; + count -= 20; + + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + while (count) { + size = min_t(uint, count, BULK_SIZE); + pipe = usb_sndbulkpipe(data->udev, 0x02); + memcpy(send_buf, firmware + sent, size); + + err = usb_bulk_msg(data->udev, pipe, send_buf, size, + &len, 3000); + + if (err || (len != size)) { + BT_ERR("Error in firmware loading err = %d," + "len = %d, size = %d", err, len, size); + goto error; + } + + sent += size; + count -= size; + } + + kfree(send_buf); + return 0; + +error: + kfree(send_buf); + return err; +} + +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + const struct firmware *firmware; + struct usb_device *udev = interface_to_usbdev(intf); + struct ath3k_data *data; + int size; + + BT_DBG("intf %p id %p", intf, id); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->udev = udev; + + if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { + kfree(data); + return -EIO; + } + + size = max_t(uint, firmware->size, 4096); + data->fw_data = kmalloc(size, GFP_KERNEL); + if (!data->fw_data) { + release_firmware(firmware); + kfree(data); + return -ENOMEM; + } + + memcpy(data->fw_data, firmware->data, firmware->size); + data->fw_size = firmware->size; + data->fw_sent = 0; + release_firmware(firmware); + + usb_set_intfdata(intf, data); + if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { + usb_set_intfdata(intf, NULL); + return -EIO; + } + + return 0; +} + +static void ath3k_disconnect(struct usb_interface *intf) +{ + struct ath3k_data *data = usb_get_intfdata(intf); + + BT_DBG("ath3k_disconnect intf %p", intf); + + kfree(data->fw_data); + kfree(data); +} + +static struct usb_driver ath3k_driver = { + .name = "ath3k", + .probe = ath3k_probe, + .disconnect = ath3k_disconnect, + .id_table = ath3k_table, +}; + +static int __init ath3k_init(void) +{ + BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION); + return usb_register(&ath3k_driver); +} + +static void __exit ath3k_exit(void) +{ + usb_deregister(&ath3k_driver); +} + +module_init(ath3k_init); +module_exit(ath3k_exit); + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ath3k-1.fw"); -- cgit v0.10.2 From 6bf8268f9a91f1065c99503161ebd061492bebe3 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:00:42 +0000 Subject: Bluetooth: Use the control channel for raw HID reports In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support for Bluetooth hid_output_raw_report was added, but it pushes the data to the interrupt channel instead of the contol one. This patch makes hid_output_raw_report use the control channel instead. Using the interrupt channel was a mistake. Signed-off-by: Bastien Nocera Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 18e7f5a..6cf526d 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -243,6 +243,39 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb) input_sync(dev); } +static int __hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + struct sk_buff *skb; + + BT_DBG("session %p data %p size %d", session, data, size); + + if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { + BT_ERR("Can't allocate memory for new frame"); + return -ENOMEM; + } + + *skb_put(skb, 1) = hdr; + if (data && size > 0) + memcpy(skb_put(skb, size), data, size); + + skb_queue_tail(&session->ctrl_transmit, skb); + + return 0; +} + +static inline int hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + int err; + + err = __hidp_send_ctrl_message(session, hdr, data, size); + + hidp_schedule(session); + + return err; +} + static int hidp_queue_report(struct hidp_session *session, unsigned char *data, int size) { @@ -282,7 +315,9 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) { - if (hidp_queue_report(hid->driver_data, data, count)) + if (hidp_send_ctrl_message(hid->driver_data, + HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + data, count)) return -ENOMEM; return count; } @@ -307,39 +342,6 @@ static inline void hidp_del_timer(struct hidp_session *session) del_timer(&session->timer); } -static int __hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - struct sk_buff *skb; - - BT_DBG("session %p data %p size %d", session, data, size); - - if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { - BT_ERR("Can't allocate memory for new frame"); - return -ENOMEM; - } - - *skb_put(skb, 1) = hdr; - if (data && size > 0) - memcpy(skb_put(skb, size), data, size); - - skb_queue_tail(&session->ctrl_transmit, skb); - - return 0; -} - -static inline int hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - int err; - - err = __hidp_send_ctrl_message(session, hdr, data, size); - - hidp_schedule(session); - - return err; -} - static void hidp_process_handshake(struct hidp_session *session, unsigned char param) { -- cgit v0.10.2 From df2e615a3b3a66d0731e3309e9731970a6c51268 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Fri, 29 Jan 2010 12:52:55 +0100 Subject: ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board Signed-off-by: Colin Tuckley Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index a21a4b3..d94857e 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -334,8 +334,8 @@ static void realview_pbx_reset(char mode) * in the system FPGA */ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(0x0000, reset_ctrl); - __raw_writel(0x0004, reset_ctrl); + __raw_writel(0x00F0, reset_ctrl); + __raw_writel(0x00F4, reset_ctrl); } static void __init realview_pbx_init(void) -- cgit v0.10.2 From c540b9ff0f8679ba924fac072aeb7d63fa473190 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 26 Jan 2010 19:09:48 +0100 Subject: ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 Current behaviour is to generate the IT instruction only for Thumb-2 code. However, the kernel helpers in entry-armv.S are compiled to ARM in a unified syntax file (if THUMB2_KERNEL). Recent compilers warn about missing IT instruction in unified assembly syntax files. The patch changes the "-mimplicit-it" gas option to "always". Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9e75825..356d702 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -94,7 +94,7 @@ CFLAGS_ABI +=-funwind-tables endif ifeq ($(CONFIG_THUMB2_KERNEL),y) -AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it) +AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb -- cgit v0.10.2 From 9e9432c267e4047db98b9d4fba95099c6effcef9 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Sat, 30 Jan 2010 20:28:19 +0100 Subject: block: fix bugs in bio-integrity mempool usage Fix two bugs in the bio integrity code: use_bip_pool() always returns 0 because it checks against the wrong limit, causing the mempool to be used only when regular allocation fails. When the mempool is used as a fallback we don't free the data properly. Signed-Off-By: Chuck Ebbert Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 49a34e7..a16f29e 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -61,7 +61,7 @@ static inline unsigned int vecs_to_idx(unsigned int nr) static inline int use_bip_pool(unsigned int idx) { - if (idx == BIOVEC_NR_POOLS) + if (idx == BIOVEC_MAX_IDX) return 1; return 0; @@ -95,6 +95,7 @@ struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio, /* Use mempool if lower order alloc failed or max vecs were requested */ if (bip == NULL) { + idx = BIOVEC_MAX_IDX; /* so we free the payload properly later */ bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask); if (unlikely(bip == NULL)) { -- cgit v0.10.2 From 3256a05531b1164a9c138da701b922a113bddf82 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 31 Jan 2010 12:39:50 +0900 Subject: nilfs2: fix potential leak of dirty data on umount This fixes incorrect usage of nilfs_segctor_confirm() test function in nilfs_segctor_destroy(); nilfs_segctor_confirm() returns zero if the filesystem is not clean, so its use in nilfs_segctor_destroy() needs inversion. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 17584c5..105b508 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2829,7 +2829,7 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci) || sci->sc_seq_request != sci->sc_seq_done); spin_unlock(&sci->sc_state_lock); - if (flag || nilfs_segctor_confirm(sci)) + if (flag || !nilfs_segctor_confirm(sci)) nilfs_segctor_write_out(sci); WARN_ON(!list_empty(&sci->sc_copied_buffers)); -- cgit v0.10.2 From 61684ceaad4f65d1a9832c722f7bd5e7fc714de9 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 25 Jan 2010 14:10:47 +0900 Subject: x86/agp: Fix agp_amd64_init regression This fixes the regression introduced by commit 42590a75019a50012f25a962246498dead428433 ("x86/agp: Fix agp_amd64_init and agp_amd64_cleanup"). The above commit changes agp_amd64_init() not to do anything if gart_iommu_aperture is not zero. If GART iommu calls agp_amd64_init(), we need to skip agp_amd64_init() when it's called later via module_init. The problem is that gart_iommu_init() calls agp_amd64_init() with not zero gart_iommu_aperture so agp_amd64_init() is never initialized. When gart_iommu_init() calls agp_amd64_init(), agp should be always initialized. Reported-by: Marin Mitov Reported-by: Johannes Hirte Signed-off-by: FUJITA Tomonori Tested-by: Marin Mitov Tested-by: Kevin Winchester Cc: davej@redhat.com Cc: Linus Torvalds LKML-Reference: <20100125141006O.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 1afb896..34cf04e 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -729,9 +729,6 @@ int __init agp_amd64_init(void) if (agp_off) return -EINVAL; - if (gart_iommu_aperture) - return agp_bridges_found ? 0 : -ENODEV; - err = pci_register_driver(&agp_amd64_pci_driver); if (err < 0) return err; @@ -768,6 +765,14 @@ int __init agp_amd64_init(void) return err; } +static int __init agp_amd64_mod_init(void) +{ + if (gart_iommu_aperture) + return agp_bridges_found ? 0 : -ENODEV; + + return agp_amd64_init(); +} + static void __exit agp_amd64_cleanup(void) { if (gart_iommu_aperture) @@ -777,7 +782,7 @@ static void __exit agp_amd64_cleanup(void) pci_unregister_driver(&agp_amd64_pci_driver); } -module_init(agp_amd64_init); +module_init(agp_amd64_mod_init); module_exit(agp_amd64_cleanup); MODULE_AUTHOR("Dave Jones , Andi Kleen"); -- cgit v0.10.2 From 97b94ccb9aa1b82ed7a9a045d0ae5b32c99b84a0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 29 Jan 2010 15:31:47 +1000 Subject: drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking. This makes displayport work again here. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 3eb0ca5..9c023d2 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -468,7 +468,7 @@ void radeon_dp_set_link_config(struct drm_connector *connector, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *dig_connector; - if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) && (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; @@ -583,7 +583,7 @@ void dp_link_train(struct drm_encoder *encoder, u8 train_set[4]; int i; - if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) && (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; -- cgit v0.10.2 From 43c33ed87d0f1b900a6a3014db556ecc7f4a989b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 29 Jan 2010 15:55:30 +1000 Subject: drm/radeon/kms: use active device to pick connector for encoder On the W500 we have UNIPHY routed to both DVI and DP, this seems to always pick the DVI connector which means link training fails. Switch to using active device to pick the connector, this seems like it should be safe from a code review, and it fixes things a bit more here. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 82eb551..10746c9 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -202,7 +202,7 @@ radeon_get_connector_for_encoder(struct drm_encoder *encoder) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { radeon_connector = to_radeon_connector(connector); - if (radeon_encoder->devices & radeon_connector->devices) + if (radeon_encoder->active_device & radeon_connector->devices) return connector; } return NULL; -- cgit v0.10.2 From f28cf33945cc112f8ee835512b7440905dc29ad2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 28 Jan 2010 17:15:25 +1000 Subject: drm/kms/radeon: pick digitial encoders smarter. (v3) booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had on our list, to pick a correct digital encoder block. The LVTMA encoder requires the second digital encoder, all others can use any encoder at all. This fixes the digital encoder selection logic to enable LVDS/DP combos to work okay. V2: fix silly addition of connector dig_block and cleanup the other places in the code that pick the encoder. V3: rename to dig_encoder and clean up further - also fix the picking algorithm. tested on Lenovo W500 + desktop 3650 cards. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 9c023d2..7106011 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -596,21 +596,14 @@ void dp_link_train(struct drm_encoder *encoder, return; dig_connector = radeon_connector->con_priv; - if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) - enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER; - else - enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER; - if (dig_connector->linkb) - enc_id |= ATOM_DP_CONFIG_LINK_B; - else - enc_id |= ATOM_DP_CONFIG_LINK_A; - } else { - if (dig_connector->linkb) - enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER | ATOM_DP_CONFIG_LINK_B; - else - enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER | ATOM_DP_CONFIG_LINK_A; - } + if (dig->dig_encoder) + enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER; + else + enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER; + if (dig_connector->linkb) + enc_id |= ATOM_DP_CONFIG_LINK_B; + else + enc_id |= ATOM_DP_CONFIG_LINK_A; memset(link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); if (dig_connector->dp_clock == 270000) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10746c9..3c91724 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -156,6 +156,26 @@ radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t return ret; } +static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder) +{ + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + switch (radeon_encoder->encoder_id) { + case ENCODER_OBJECT_ID_INTERNAL_LVDS: + case ENCODER_OBJECT_ID_INTERNAL_TMDS1: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1: + case ENCODER_OBJECT_ID_INTERNAL_LVTM1: + case ENCODER_OBJECT_ID_INTERNAL_DVO1: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: + case ENCODER_OBJECT_ID_INTERNAL_DDI: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: + return true; + default: + return false; + } +} void radeon_link_encoder_connector(struct drm_device *dev) { @@ -676,31 +696,11 @@ atombios_dig_encoder_setup(struct drm_encoder *encoder, int action) memset(&args, 0, sizeof(args)); - if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - else - index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); - num = dig->dig_block + 1; - } else { - switch (radeon_encoder->encoder_id) { - case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - else - index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); - num = 1; - break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - num = 2; - break; - } - } + if (dig->dig_encoder) + index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); + else + index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); + num = dig->dig_encoder + 1; atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -822,7 +822,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) + if (dig->dig_encoder == 1) args.v2.acConfig.ucEncoderSel = 1; if (dig_connector->linkb) args.v2.acConfig.ucLinkSel = 1; @@ -849,17 +849,16 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t args.v2.acConfig.fCoherentMode = 1; } } else { + args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; + if (dig->dig_encoder) + args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; + else + args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER; + switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; - else - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER; if (rdev->flags & RADEON_IS_IGP) { if (radeon_encoder->pixel_clock > 165000) { if (dig_connector->igp_lane_info & 0x3) @@ -878,10 +877,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t } } break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; - break; } if (radeon_encoder->pixel_clock > 165000) @@ -1046,6 +1041,7 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder) union crtc_sourc_param args; int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source); uint8_t frev, crev; + struct radeon_encoder_atom_dig *dig; memset(&args, 0, sizeof(args)); @@ -1109,40 +1105,16 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder) case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: - if (ASIC_IS_DCE32(rdev)) { - if (radeon_crtc->crtc_id) - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - else - args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; - } else { - struct drm_connector *connector; - struct radeon_connector *radeon_connector; - struct radeon_connector_atom_dig *dig_connector; - - connector = radeon_get_connector_for_encoder(encoder); - if (!connector) - return; - radeon_connector = to_radeon_connector(connector); - if (!radeon_connector->con_priv) - return; - dig_connector = radeon_connector->con_priv; - - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - else - args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; - } + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: + dig = radeon_encoder->enc_priv; + if (dig->dig_encoder) + args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; + else + args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; break; case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID; break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - break; case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID; @@ -1202,6 +1174,47 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } } +static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_encoder *test_encoder; + struct radeon_encoder_atom_dig *dig; + uint32_t dig_enc_in_use = 0; + /* on DCE32 and encoder can driver any block so just crtc id */ + if (ASIC_IS_DCE32(rdev)) { + return radeon_crtc->crtc_id; + } + + /* on DCE3 - LVTMA can only be driven by DIGB */ + list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { + struct radeon_encoder *radeon_test_encoder; + + if (encoder == test_encoder) + continue; + + if (!radeon_encoder_is_digital(test_encoder)) + continue; + + radeon_test_encoder = to_radeon_encoder(test_encoder); + dig = radeon_test_encoder->enc_priv; + + if (dig->dig_encoder >= 0) + dig_enc_in_use |= (1 << dig->dig_encoder); + } + + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) { + if (dig_enc_in_use & 0x2) + DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n"); + return 1; + } + if (!(dig_enc_in_use & 1)) + return 0; + return 1; +} + static void radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, @@ -1214,12 +1227,9 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, if (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) { - if (radeon_encoder->enc_priv) { - struct radeon_encoder_atom_dig *dig; - - dig = radeon_encoder->enc_priv; - dig->dig_block = radeon_crtc->crtc_id; - } + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; + if (dig) + dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder); } radeon_encoder->pixel_clock = adjusted_mode->clock; @@ -1379,7 +1389,13 @@ static void radeon_atom_encoder_commit(struct drm_encoder *encoder) static void radeon_atom_encoder_disable(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_encoder_atom_dig *dig; radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + + if (radeon_encoder_is_digital(encoder)) { + dig = radeon_encoder->enc_priv; + dig->dig_encoder = -1; + } radeon_encoder->active_device = 0; } @@ -1436,6 +1452,7 @@ radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder) /* coherent mode by default */ dig->coherent_mode = true; + dig->dig_encoder = -1; return dig; } diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 96b851f..e81b2ae 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -299,7 +299,7 @@ struct radeon_atom_ss { struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; - int dig_block; + int dig_encoder; /* -1 disabled, 0 DIGA, 1 DIGB */ /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; -- cgit v0.10.2 From db78e27de7e29a6db6be7caf607cf803d84094aa Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Tue, 12 Jan 2010 18:49:43 +0100 Subject: drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching. Fixes errors like: > reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10 when a BO is moved between WC and UC areas. Reported-by: Xavier Chantry Signed-off-by: Francisco Jerez Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 9c2b1cc..e2123af 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -198,17 +198,26 @@ EXPORT_SYMBOL(ttm_tt_populate); static inline int ttm_tt_set_page_caching(struct page *p, enum ttm_caching_state c_state) { + int ret = 0; + if (PageHighMem(p)) return 0; - switch (c_state) { - case tt_cached: - return set_pages_wb(p, 1); - case tt_wc: - return set_memory_wc((unsigned long) page_address(p), 1); - default: - return set_pages_uc(p, 1); + if (get_page_memtype(p) != -1) { + /* p isn't in the default caching state, set it to + * writeback first to free its current memtype. */ + + ret = set_pages_wb(p, 1); + if (ret) + return ret; } + + if (c_state == tt_wc) + ret = set_memory_wc((unsigned long) page_address(p), 1); + else if (c_state == tt_uncached) + ret = set_pages_uc(p, 1); + + return ret; } #else /* CONFIG_X86 */ static inline int ttm_tt_set_page_caching(struct page *p, -- cgit v0.10.2 From cdb6e375c3c84558ed2c13c5461b22e8f7b7980e Mon Sep 17 00:00:00 2001 From: John Kacur Date: Sun, 31 Jan 2010 20:38:02 +0100 Subject: =?UTF-8?q?drm/kms/radeon/agp:=20Fix=20warning,=20format=20?= =?UTF-8?q?=E2=80=98%d=E2=80=99=20expects=20type=20=E2=80=98int=E2=80=99,?= =?UTF-8?q?=20but=20argument=204=20has=20type=20=E2=80=98size=5Ft=E2=80=99?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Fix warning by using %zu instead of %d for size_t - Fix spelling mistake, "to" should be "too". Signed-off-by: John Kacur Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index c9ad7f5..f58c5f4 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -134,7 +134,7 @@ int radeon_agp_init(struct radeon_device *rdev) int ret; if (rdev->ddev->agp->agp_info.aper_size < 32) { - dev_warn(rdev->dev, "AGP aperture to small (%dM) " + dev_warn(rdev->dev, "AGP aperture too small (%zuM) " "need at least 32M, disabling AGP\n", rdev->ddev->agp->agp_info.aper_size); return -EINVAL; -- cgit v0.10.2 From 2dea2e29b9fad48c759aa406b5ea426bff4339af Mon Sep 17 00:00:00 2001 From: John Kacur Date: Sun, 31 Jan 2010 20:38:03 +0100 Subject: drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info First call drm_agp_acquire to check if agp has been acquired. Second call drm_agp_info to fill in the info data struct, including aper_size. Finally do the check to see if the aper_size makes sense. Signed-off-by: John Kacur Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index f58c5f4..b634d98 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -133,13 +133,6 @@ int radeon_agp_init(struct radeon_device *rdev) bool is_v3; int ret; - if (rdev->ddev->agp->agp_info.aper_size < 32) { - dev_warn(rdev->dev, "AGP aperture too small (%zuM) " - "need at least 32M, disabling AGP\n", - rdev->ddev->agp->agp_info.aper_size); - return -EINVAL; - } - /* Acquire AGP. */ if (!rdev->ddev->agp->acquired) { ret = drm_agp_acquire(rdev->ddev); @@ -154,6 +147,14 @@ int radeon_agp_init(struct radeon_device *rdev) DRM_ERROR("Unable to get AGP info: %d\n", ret); return ret; } + + if (rdev->ddev->agp->agp_info.aper_size < 32) { + dev_warn(rdev->dev, "AGP aperture too small (%zuM) " + "need at least 32M, disabling AGP\n", + rdev->ddev->agp->agp_info.aper_size); + return -EINVAL; + } + mode.mode = info.mode; agp_status = (RREG32(RADEON_AGP_STATUS) | RADEON_AGPv3_MODE) & mode.mode; is_v3 = !!(agp_status & RADEON_AGPv3_MODE); -- cgit v0.10.2 From 4b866288be6ffaefaad9cec212cb09e3258a68ee Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 1 Feb 2010 11:22:10 +1000 Subject: drm/radeon/kms: release agp on error. if we get an error, release the AGP if we've acquired it already. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index b634d98..c0681a55 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -144,11 +144,13 @@ int radeon_agp_init(struct radeon_device *rdev) ret = drm_agp_info(rdev->ddev, &info); if (ret) { + drm_agp_release(rdev->ddev); DRM_ERROR("Unable to get AGP info: %d\n", ret); return ret; } if (rdev->ddev->agp->agp_info.aper_size < 32) { + drm_agp_release(rdev->ddev); dev_warn(rdev->dev, "AGP aperture too small (%zuM) " "need at least 32M, disabling AGP\n", rdev->ddev->agp->agp_info.aper_size); @@ -229,6 +231,7 @@ int radeon_agp_init(struct radeon_device *rdev) ret = drm_agp_enable(rdev->ddev, mode); if (ret) { DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode); + drm_agp_release(rdev->ddev); return ret; } -- cgit v0.10.2 From dd5fde6041d7ea30fcfedcc159a4cec8b01f73b2 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 26 Jan 2010 17:10:48 +0000 Subject: drm/ttm: remove padding from ttm_ref_object on 64bit builds Re-order structure ttm_ref_object to remove 8 bytes of alignment padding on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it to fit into a smaller slab. Signed-off-by: Richard Kennedy Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c index 1099aba..75e9d6f 100644 --- a/drivers/gpu/drm/ttm/ttm_object.c +++ b/drivers/gpu/drm/ttm/ttm_object.c @@ -109,8 +109,8 @@ struct ttm_ref_object { struct drm_hash_item hash; struct list_head head; struct kref kref; - struct ttm_base_object *obj; enum ttm_ref_type ref_type; + struct ttm_base_object *obj; struct ttm_object_file *tfile; }; -- cgit v0.10.2 From fa5829b36539067f3c675f5d437531dedcfc4ad8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Sat, 23 Jan 2010 10:25:28 +1000 Subject: drm/kms: Remove incorrect comment in struct drm_mode_modeinfo Signed-off-by: Dave Airlie diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index bc4fdf2..c5ba163 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -85,7 +85,7 @@ struct drm_mode_modeinfo { __u16 hdisplay, hsync_start, hsync_end, htotal, hskew; __u16 vdisplay, vsync_start, vsync_end, vtotal, vscan; - __u32 vrefresh; /* vertical refresh * 1000 */ + __u32 vrefresh; __u32 flags; __u32 type; -- cgit v0.10.2 From 110b20c3ddcfa98cc932aef3af2d59b4e0841f08 Mon Sep 17 00:00:00 2001 From: Austin Yuan Date: Thu, 21 Jan 2010 13:45:40 +0800 Subject: drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c Signed-off-by: Austin Yuan Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index ceae52f..3f72fe1 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -53,7 +53,6 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, { struct ttm_tt *ttm = bo->ttm; struct ttm_mem_reg *old_mem = &bo->mem; - uint32_t save_flags = old_mem->placement; int ret; if (old_mem->mem_type != TTM_PL_SYSTEM) { @@ -62,7 +61,6 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, ttm_flag_masked(&old_mem->placement, TTM_PL_FLAG_SYSTEM, TTM_PL_MASK_MEM); old_mem->mem_type = TTM_PL_SYSTEM; - save_flags = old_mem->placement; } ret = ttm_tt_set_placement_caching(ttm, new_mem->placement); @@ -77,7 +75,7 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); + return 0; } EXPORT_SYMBOL(ttm_bo_move_ttm); @@ -219,7 +217,6 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, void *old_iomap; void *new_iomap; int ret; - uint32_t save_flags = old_mem->placement; unsigned long i; unsigned long page; unsigned long add = 0; @@ -270,7 +267,6 @@ out2: *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (ttm != NULL)) { ttm_tt_unbind(ttm); @@ -537,7 +533,6 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type]; struct ttm_mem_reg *old_mem = &bo->mem; int ret; - uint32_t save_flags = old_mem->placement; struct ttm_buffer_object *ghost_obj; void *tmp_obj = NULL; @@ -598,7 +593,7 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); + return 0; } EXPORT_SYMBOL(ttm_bo_move_accel_cleanup); -- cgit v0.10.2 From 8e19a951774a16cf2626292ae06fd2b62630e67e Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Sat, 30 Jan 2010 03:38:06 +0000 Subject: drm/vmwgfx: Correctly detect 3D Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index dedd121..f47ff2c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -357,6 +357,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; register_pm_notifier(&dev_priv->pm_nb); + DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n"); + return 0; out_no_device: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 50529a7..59acc51 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -389,6 +389,7 @@ extern int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence); extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason); extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma); +extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv); /** * TTM glue - vmwgfx_ttm_glue.c diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index f7d5f70..4157547 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -29,6 +29,25 @@ #include "drmP.h" #include "ttm/ttm_placement.h" +bool vmw_fifo_have_3d(struct vmw_private *dev_priv) +{ + __le32 __iomem *fifo_mem = dev_priv->mmio_virt; + uint32_t fifo_min, hwversion; + + fifo_min = ioread32(fifo_mem + SVGA_FIFO_MIN); + if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int)) + return false; + + hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + if (hwversion == 0) + return false; + + if (hwversion < SVGA3D_HWVERSION_WS65_B1) + return false; + + return true; +} + int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 5fa6a4e..778851f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -43,7 +43,7 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, param->value = vmw_overlay_num_free_overlays(dev_priv); break; case DRM_VMW_PARAM_3D: - param->value = dev_priv->capabilities & SVGA_CAP_3D ? 1 : 0; + param->value = vmw_fifo_have_3d(dev_priv) ? 1 : 0; break; case DRM_VMW_PARAM_FIFO_OFFSET: param->value = dev_priv->mmio_start; -- cgit v0.10.2 From c188660f6dbb0df9febe1b841a16c66c28353c15 Mon Sep 17 00:00:00 2001 From: Peter Hanzel Date: Sat, 30 Jan 2010 03:38:07 +0000 Subject: drm/vmwgfx: Request SVGA version 2 and bail if not found This fixes the driver not loading on older versions of VMware. Signed-off-by: Peter Hanzel Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index f47ff2c..a6e8f68 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -209,6 +209,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) { struct vmw_private *dev_priv; int ret; + uint32_t svga_id; dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL); if (unlikely(dev_priv == NULL)) { @@ -239,6 +240,16 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->mmio_start = pci_resource_start(dev->pdev, 2); mutex_lock(&dev_priv->hw_mutex); + + vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); + svga_id = vmw_read(dev_priv, SVGA_REG_ID); + if (svga_id != SVGA_ID_2) { + ret = -ENOSYS; + DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id); + mutex_unlock(&dev_priv->hw_mutex); + goto out_err0; + } + dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES); if (dev_priv->capabilities & SVGA_CAP_GMR) { -- cgit v0.10.2 From 5ffdb658f605cbc420944e7c7eeec9fbb8a73772 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Sat, 30 Jan 2010 03:38:08 +0000 Subject: drm/vmwgfx: Don't send bad flags to the host Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 59acc51..135be96 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -96,6 +96,8 @@ struct vmw_surface { struct drm_vmw_size *sizes; uint32_t num_sizes; + bool scanout; + /* TODO so far just a extra pointer */ struct vmw_cursor_snooper snooper; }; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 686692d..eeba6d1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -707,6 +707,9 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, if (ret) goto try_dmabuf; + if (!surface->scanout) + goto err_not_scanout; + ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb, mode_cmd->width, mode_cmd->height); @@ -740,6 +743,13 @@ try_dmabuf: } return &vfb->base; + +err_not_scanout: + DRM_ERROR("surface not marked as scanout\n"); + /* vmw_user_surface_lookup takes one ref */ + vmw_surface_unreference(&surface); + + return NULL; } static int vmw_kms_fb_changed(struct drm_device *dev) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index e01db12..c7efbd47 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -35,6 +35,11 @@ #define VMW_RES_SURFACE ttm_driver_type1 #define VMW_RES_STREAM ttm_driver_type2 +/* XXX: This isn't a real hardware flag, but just a hack for kernel to + * know about primary surfaces. Find a better way to accomplish this. + */ +#define SVGA3D_SURFACE_HINT_SCANOUT (1 << 9) + struct vmw_user_context { struct ttm_base_object base; struct vmw_resource res; @@ -599,8 +604,17 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, if (unlikely(ret != 0)) goto out_err1; + if (srf->flags & SVGA3D_SURFACE_HINT_SCANOUT) { + /* we should not send this flag down to hardware since + * its not a official one + */ + srf->flags &= ~SVGA3D_SURFACE_HINT_SCANOUT; + srf->scanout = true; + } else { + srf->scanout = false; + } - if (srf->flags & (1 << 9) && + if (srf->scanout && srf->num_sizes == 1 && srf->sizes[0].width == 64 && srf->sizes[0].height == 64 && -- cgit v0.10.2 From ff82f052d2a187dd0fa0e431ba70eb457c71a40e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 22 Jan 2010 15:19:00 +0100 Subject: drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3 If an error happen in r600_blit_prepare_copy report it rather than WARNING and keeping execution. For instance if ib allocation failed we did just warn about but then latter tried to access NULL ib ptr causing oops. This patch also protect r600_copy_blit with a mutex as otherwise one process might overwrite blit temporary data with new one possibly leading to GPU lockup. Should partialy or totaly fix: https://bugzilla.redhat.com/show_bug.cgi?id=553279 V2 failing blit initialization is not fatal, fallback to memcpy when this happen V3 init blit before startup as we pin in startup, remove duplicate code (this one was actualy tested unlike V2) Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index d0bd117..b833b4b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1788,23 +1788,24 @@ void r600_fence_ring_emit(struct radeon_device *rdev, radeon_ring_write(rdev, RB_INT_STAT); } -int r600_copy_dma(struct radeon_device *rdev, - uint64_t src_offset, - uint64_t dst_offset, - unsigned num_pages, - struct radeon_fence *fence) -{ - /* FIXME: implement */ - return 0; -} - int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + int r; + + mutex_lock(&rdev->r600_blit.mutex); + rdev->r600_blit.vb_ib = NULL; + r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + if (r) { + if (rdev->r600_blit.vb_ib) + radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); + mutex_unlock(&rdev->r600_blit.mutex); + return r; + } r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); + mutex_unlock(&rdev->r600_blit.mutex); return 0; } @@ -1860,26 +1861,19 @@ int r600_startup(struct radeon_device *rdev) return r; } r600_gpu_init(rdev); - - if (!rdev->r600_blit.shader_obj) { - r = r600_blit_init(rdev); + /* pin copy shader into vram */ + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (unlikely(r != 0)) + return r; + r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, + &rdev->r600_blit.shader_gpu_addr); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); if (r) { - DRM_ERROR("radeon: failed blitter (%d).\n", r); + dev_err(rdev->dev, "(%d) pin blit object failed\n", r); return r; } } - - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) - return r; - r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, - &rdev->r600_blit.shader_gpu_addr); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); - if (r) { - dev_err(rdev->dev, "(%d) pin blit object failed\n", r); - return r; - } - /* Enable IRQ */ r = r600_irq_init(rdev); if (r) { @@ -2051,6 +2045,12 @@ int r600_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } rdev->accel_working = true; r = r600_startup(rdev); diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 2bedce4..af1c3ca 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -449,6 +449,7 @@ int r600_blit_init(struct radeon_device *rdev) u32 packet2s[16]; int num_packet2s = 0; + mutex_init(&rdev->r600_blit.mutex); rdev->r600_blit.state_offset = 0; if (rdev->family >= CHIP_RV770) @@ -557,7 +558,8 @@ int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) int dwords_per_loop = 76, num_loops; r = r600_vb_ib_get(rdev); - WARN_ON(r); + if (r) + return r; /* set_render_target emits 2 extra dwords on rv6xx */ if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770) @@ -583,7 +585,8 @@ int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) ring_size += 5; /* done copy */ ring_size += 7; /* fence emit for done copy */ r = radeon_ring_lock(rdev, ring_size); - WARN_ON(r); + if (r) + return r; set_default_state(rdev); /* 14 */ set_shaders(rdev); /* 26 */ diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index f7df1a7..2d5f2bf 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -416,6 +416,7 @@ struct r600_ih { }; struct r600_blit { + struct mutex mutex; struct radeon_bo *shader_obj; u64 shader_gpu_addr; u32 vs_offset, ps_offset; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index cf8f2b1..2d46576 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -887,26 +887,19 @@ static int rv770_startup(struct radeon_device *rdev) return r; } rv770_gpu_init(rdev); - - if (!rdev->r600_blit.shader_obj) { - r = r600_blit_init(rdev); + /* pin copy shader into vram */ + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (unlikely(r != 0)) + return r; + r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, + &rdev->r600_blit.shader_gpu_addr); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); if (r) { - DRM_ERROR("radeon: failed blitter (%d).\n", r); + DRM_ERROR("failed to pin blit object %d\n", r); return r; } } - - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) - return r; - r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, - &rdev->r600_blit.shader_gpu_addr); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); - if (r) { - DRM_ERROR("failed to pin blit object %d\n", r); - return r; - } - /* Enable IRQ */ r = r600_irq_init(rdev); if (r) { @@ -1062,6 +1055,12 @@ int rv770_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } rdev->accel_working = true; r = rv770_startup(rdev); -- cgit v0.10.2 From f71d0187987e691516cd10c2702f002c0e2f0edc Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 1 Feb 2010 11:35:47 +1000 Subject: drm/radeon/kms: move radeon KMS on/off switch out of staging. We are happy enough that the KMS driver is stable enough for enough people for the kms enable/disable to leave staging. Distros can now contemplate turning this on. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 96eddd1..305c590 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -66,6 +66,8 @@ config DRM_RADEON If M is selected, the module will be called radeon. +source "drivers/gpu/drm/radeon/Kconfig" + config DRM_I810 tristate "Intel I810" depends on DRM && AGP && AGP_INTEL diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 9533ab6..28e9b04 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -103,8 +103,6 @@ source "drivers/staging/line6/Kconfig" source "drivers/gpu/drm/vmwgfx/Kconfig" -source "drivers/gpu/drm/radeon/Kconfig" - source "drivers/gpu/drm/nouveau/Kconfig" source "drivers/staging/octeon/Kconfig" -- cgit v0.10.2 From bf647fafda6515adf5ba84249fd08f64b5a9ec21 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 1 Feb 2010 13:32:41 +1100 Subject: powerpc/pseries: Fix xics build without CONFIG_SMP desc->affinity doesn't exit in that case. Let's use a macro for the UP variant of get_irq_server(), it's the easiest way, avoids evaluating arguments. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index d80f193c..1ee66db 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -191,11 +191,7 @@ static int get_irq_server(unsigned int virq, cpumask_t cpumask, return default_server; } #else -static int get_irq_server(unsigned int virq, cpumask_t cpumask, - unsigned int strict_check) -{ - return default_server; -} +#define get_irq_server(virq, cpumask, strict_check) (default_server) #endif static void xics_unmask_irq(unsigned int virq) -- cgit v0.10.2 From d2f6650a950dadd20667a04a9dc785f240d43695 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 29 Jan 2010 17:48:51 +0100 Subject: ACPI: Add NULL pointer check in acpi_bus_start If acpi_bus_add does not return a device and it's passed to acpi_bus_start, bad things will happen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] acpi_bus_start+0x14/0x24 ... [] acpiphp_bus_add+0xba/0x130 [acpiphp] [] enable_device+0x132/0x2ff [acpiphp] [] acpiphp_enable_slot+0xb8/0x130 [acpiphp] [] handle_hotplug_event_func+0x87/0x190 [acpiphp] Next patch would make this NULL pointer check obsolete, but better having one more than one missing... Signed-off-by: Thomas Renninger Acked-by: Bjorn Helgaas CC: stable@kernel.org Signed-off-by: Len Brown diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ff9f622..8044583 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1357,6 +1357,9 @@ int acpi_bus_start(struct acpi_device *device) { struct acpi_bus_ops ops; + if (!device) + return -EINVAL; + memset(&ops, 0, sizeof(ops)); ops.acpi_op_start = 1; -- cgit v0.10.2 From 7779688fc3d1ceddad84846a7b0affbe8e78ec6e Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 29 Jan 2010 17:48:52 +0100 Subject: ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found Callers (acpi_memhotplug.c, dock.c and others) check for the return value of acpi_bus_add() and assume a valid device was returned in case zero was returned. Thus return -ENODEV if no device was found in acpi_bus_scan and propagate this through acpi_bus_add and acpi_bus_start. Also remove a confusing comment in acpiphp_glue.c, acpi_bus_scan will and cannot invoke if acpi_bus_add returns no valid device. Signed-off-by: Thomas Renninger Acked-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8044583..3e00967 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1336,9 +1336,25 @@ static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops, if (child) *child = device; - return 0; + + if (device) + return 0; + else + return -ENODEV; } +/* + * acpi_bus_add and acpi_bus_start + * + * scan a given ACPI tree and (probably recently hot-plugged) + * create and add or starts found devices. + * + * If no devices were found -ENODEV is returned which does not + * mean that this is a real error, there just have been no suitable + * ACPI objects in the table trunk from which the kernel could create + * a device and add/start an appropriate driver. + */ + int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent, acpi_handle handle, int type) @@ -1348,8 +1364,7 @@ acpi_bus_add(struct acpi_device **child, memset(&ops, 0, sizeof(ops)); ops.acpi_op_add = 1; - acpi_bus_scan(handle, &ops, child); - return 0; + return acpi_bus_scan(handle, &ops, child); } EXPORT_SYMBOL(acpi_bus_add); @@ -1363,8 +1378,7 @@ int acpi_bus_start(struct acpi_device *device) memset(&ops, 0, sizeof(ops)); ops.acpi_op_start = 1; - acpi_bus_scan(device->handle, &ops, NULL); - return 0; + return acpi_bus_scan(device->handle, &ops, NULL); } EXPORT_SYMBOL(acpi_bus_start); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 8e952fd..cb2fd01 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -720,12 +720,6 @@ static int acpiphp_bus_add(struct acpiphp_func *func) -ret_val); goto acpiphp_bus_add_out; } - /* - * try to start anyway. We could have failed to add - * simply because this bus had previously been added - * on another add. Don't bother with the return value - * we just keep going. - */ ret_val = acpi_bus_start(device); acpiphp_bus_add_out: -- cgit v0.10.2 From 17aafccab4352b422aa01fa6ebf82daff693a5b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Fri, 22 Jan 2010 09:20:00 +0100 Subject: drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib being non-NULL before dereferencing it. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 1496cb8..1190148 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -189,7 +189,7 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (error) { + if (error && parser->ib) { radeon_bo_list_unvalidate(&parser->validated, parser->ib->fence); } else { -- cgit v0.10.2 From 94f28da8409c6059135e89ac64a0839993124155 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sat, 30 Jan 2010 10:20:59 +0000 Subject: powerpc: TIF_ABI_PENDING bit removal Here are the powerpc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 17828ad..c376eda 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -235,14 +235,10 @@ typedef elf_vrregset_t elf_fpxregset_t; #ifdef __powerpc64__ # define SET_PERSONALITY(ex) \ do { \ - unsigned long new_flags = 0; \ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags = _TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ + set_thread_flag(TIF_32BIT); \ else \ - clear_thread_flag(TIF_ABI_PENDING); \ + clear_thread_flag(TIF_32BIT); \ if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX | \ (current->personality & (~PER_MASK))); \ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index c8b3292..aa9d383 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -111,7 +111,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ #define TIF_FREEZE 14 /* Freezing for suspend */ #define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ -#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<thread.dabr) { -- cgit v0.10.2 From d6ad3e286d2c075a60b9f11075a2c55aeeeca2ad Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 27 Jan 2010 16:25:22 -0600 Subject: softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, sched_clock() gets the time from hardware such as the TSC on x86. In this configuration kgdb will report a softlock warning message on resuming or detaching from a debug session. Sequence of events in the problem case: 1) "cpu sched clock" and "hardware time" are at 100 sec prior to a call to kgdb_handle_exception() 2) Debugger waits in kgdb_handle_exception() for 80 sec and on exit the following is called ... touch_softlockup_watchdog() --> __raw_get_cpu_var(touch_timestamp) = 0; 3) "cpu sched clock" = 100s (it was not updated, because the interrupt was disabled in kgdb) but the "hardware time" = 180 sec 4) The first timer interrupt after resuming from kgdb_handle_exception updates the watchdog from the "cpu sched clock" update_process_times() { ... run_local_timers() --> softlockup_tick() --> check (touch_timestamp == 0) (it is "YES" here, we have set "touch_timestamp = 0" at kgdb) --> __touch_softlockup_watchdog() ***(A)--> reset "touch_timestamp" to "get_timestamp()" (Here, the "touch_timestamp" will still be set to 100s.) ... scheduler_tick() ***(B)--> sched_clock_tick() (update "cpu sched clock" to "hardware time" = 180s) ... } 5) The Second timer interrupt handler appears to have a large jump and trips the softlockup warning. update_process_times() { ... run_local_timers() --> softlockup_tick() --> "cpu sched clock" - "touch_timestamp" = 180s-100s > 60s --> printk "soft lockup error messages" ... } note: ***(A) reset "touch_timestamp" to "get_timestamp(this_cpu)" Why is "touch_timestamp" 100 sec, instead of 180 sec? When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, the call trace of get_timestamp() is: get_timestamp(this_cpu) -->cpu_clock(this_cpu) -->sched_clock_cpu(this_cpu) -->__update_sched_clock(sched_clock_data, now) The __update_sched_clock() function uses the GTOD tick value to create a window to normalize the "now" values. So if "now" value is too big for sched_clock_data, it will be ignored. The fix is to invoke sched_clock_tick() to update "cpu sched clock" in order to recover from this state. This is done by introducing the function touch_softlockup_watchdog_sync(). This allows kgdb to request that the sched clock is updated when the watchdog thread runs the first time after a resume from kgdb. [yong.zhang0@gmail.com: Use per cpu instead of an array] Signed-off-by: Jason Wessel Signed-off-by: Dongdong Deng Cc: kgdb-bugreport@lists.sourceforge.net Cc: peterz@infradead.org LKML-Reference: <1264631124-4837-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 6f7bba9..8923215 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -310,6 +310,7 @@ extern void sched_show_task(struct task_struct *p); #ifdef CONFIG_DETECT_SOFTLOCKUP extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); +extern void touch_softlockup_watchdog_sync(void); extern void touch_all_softlockup_watchdogs(void); extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, void __user *buffer, @@ -323,6 +324,9 @@ static inline void softlockup_tick(void) static inline void touch_softlockup_watchdog(void) { } +static inline void touch_softlockup_watchdog_sync(void) +{ +} static inline void touch_all_softlockup_watchdogs(void) { } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 2eb517e..87f2cc5 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -596,7 +596,7 @@ static void kgdb_wait(struct pt_regs *regs) /* Signal the primary CPU that we are done: */ atomic_set(&cpu_in_kgdb[cpu], 0); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); } @@ -1450,7 +1450,7 @@ acquirelock: (kgdb_info[cpu].task && kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); @@ -1550,7 +1550,7 @@ kgdb_restore: } /* Free kgdb_active */ atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); diff --git a/kernel/softlockup.c b/kernel/softlockup.c index d225790..0d4c789 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -25,6 +25,7 @@ static DEFINE_SPINLOCK(print_lock); static DEFINE_PER_CPU(unsigned long, softlockup_touch_ts); /* touch timestamp */ static DEFINE_PER_CPU(unsigned long, softlockup_print_ts); /* print timestamp */ static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog); +static DEFINE_PER_CPU(bool, softlock_touch_sync); static int __read_mostly did_panic; int __read_mostly softlockup_thresh = 60; @@ -79,6 +80,12 @@ void touch_softlockup_watchdog(void) } EXPORT_SYMBOL(touch_softlockup_watchdog); +void touch_softlockup_watchdog_sync(void) +{ + __raw_get_cpu_var(softlock_touch_sync) = true; + __raw_get_cpu_var(softlockup_touch_ts) = 0; +} + void touch_all_softlockup_watchdogs(void) { int cpu; @@ -118,6 +125,14 @@ void softlockup_tick(void) } if (touch_ts == 0) { + if (unlikely(per_cpu(softlock_touch_sync, this_cpu))) { + /* + * If the time stamp was touched atomically + * make sure the scheduler tick is up to date. + */ + per_cpu(softlock_touch_sync, this_cpu) = false; + sched_clock_tick(); + } __touch_softlockup_watchdog(); return; } -- cgit v0.10.2 From bcf4dd43424cdfd8195f3955300a579fe58e9911 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Mon, 1 Feb 2010 09:58:54 +0100 Subject: blk-cgroup: Fix potential deadlock in blk-cgroup I triggered a lockdep warning as following. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.33-rc2 #1 ------------------------------------------------------- test_io_control/7357 is trying to acquire lock: (blkio_list_lock){+.+...}, at: [] blkiocg_weight_write+0x82/0x9e but task is already holding lock: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&(&blkcg->lock)->rlock){......}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] blkiocg_add_blkio_group+0x1a/0x6d [] cfq_get_queue+0x225/0x3de [] cfq_set_request+0x217/0x42d [] elv_set_request+0x17/0x26 [] get_request+0x203/0x2c5 [] get_request_wait+0x18/0x10e [] __make_request+0x2ba/0x375 [] generic_make_request+0x28d/0x30f [] submit_bio+0x8a/0x8f [] submit_bh+0xf0/0x10f [] ll_rw_block+0xc0/0xf9 [] ext3_find_entry+0x319/0x544 [ext3] [] ext3_lookup+0x2c/0xb9 [ext3] [] do_lookup+0xd3/0x172 [] link_path_walk+0x5fb/0x95c [] path_walk+0x3c/0x81 [] do_path_lookup+0x21/0x8a [] do_filp_open+0xf0/0x978 [] open_exec+0x1b/0xb7 [] do_execve+0xbb/0x266 [] sys_execve+0x24/0x4a [] ptregs_execve+0x12/0x18 -> #1 (&(&q->__queue_lock)->rlock){..-.-.}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] cfq_unlink_blkio_group+0x17/0x41 [] blkiocg_destroy+0x72/0xc7 [] cgroup_diput+0x4a/0xb2 [] dentry_iput+0x93/0xb7 [] d_kill+0x1c/0x36 [] dput+0xf5/0xfe [] do_rmdir+0x95/0xbe [] sys_rmdir+0x10/0x12 [] sysenter_do_call+0x12/0x32 -> #0 (blkio_list_lock){+.+...}: [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock+0x1e/0x4e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 1 lock held by test_io_control/7357: #0: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e stack backtrace: Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1 Call Trace: [] print_circular_bug+0x91/0x9d [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] ? blkiocg_weight_write+0x82/0x9e [] _raw_spin_lock+0x1e/0x4e [] ? blkiocg_weight_write+0x82/0x9e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x2e/0x44 [] ? security_file_permission+0xf/0x11 [] ? rw_verify_area+0x8a/0xad [] ? cgroup_file_write+0x0/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 To prevent deadlock, we should take locks as following sequence: blkio_list_lock -> queue_lock -> blkcg_lock. The following patch should fix this bug. Signed-off-by: Gui Jianfeng Signed-off-by: Jens Axboe diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 1fa2654..e7dbbaf 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -147,16 +147,16 @@ blkiocg_weight_write(struct cgroup *cgroup, struct cftype *cftype, u64 val) return -EINVAL; blkcg = cgroup_to_blkio_cgroup(cgroup); + spin_lock(&blkio_list_lock); spin_lock_irq(&blkcg->lock); blkcg->weight = (unsigned int)val; hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) { - spin_lock(&blkio_list_lock); list_for_each_entry(blkiop, &blkio_list, list) blkiop->ops.blkio_update_group_weight_fn(blkg, blkcg->weight); - spin_unlock(&blkio_list_lock); } spin_unlock_irq(&blkcg->lock); + spin_unlock(&blkio_list_lock); return 0; } -- cgit v0.10.2 From 55f0b4c546d1c87cccba63dc0fc5eb70e2b41733 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Mon, 25 Jan 2010 11:23:24 -0600 Subject: GFS2: Don't withdraw on partial rindex entries ince gfs2 writes the rindex file a block at a time, and releases the exclusive lock after each block, it is possible that another process will grab the lock in the middle of the write. Since rindex entries are not an even divisor of blocks, that other process may see partial entries. On grows, this is fine. The process can simply ignore the the partial entires. Previously, the code withdrew when it saw partial entries. Now it simply ignores them. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 0608f49..6702b82 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -591,11 +591,6 @@ static int gfs2_ri_update(struct gfs2_inode *ip) u64 rgrp_count = ip->i_disksize; int error; - if (do_div(rgrp_count, sizeof(struct gfs2_rindex))) { - gfs2_consist_inode(ip); - return -EIO; - } - clear_rgrpdi(sdp); file_ra_state_init(&ra_state, inode->i_mapping); -- cgit v0.10.2 From 7fe3ec6fe58d2bfe97fe7a5d731c29299a8ffd35 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:20:34 +0000 Subject: GFS2: Fix previous patch The do_div() call needs to remain. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 6702b82..46534a5 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -591,6 +591,7 @@ static int gfs2_ri_update(struct gfs2_inode *ip) u64 rgrp_count = ip->i_disksize; int error; + do_div(rgrp_count, sizeof(struct gfs2_rindex)); clear_rgrpdi(sdp); file_ra_state_init(&ra_state, inode->i_mapping); -- cgit v0.10.2 From ea8d62dadd0217334fb2c5d60e7f89e14076ca10 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:48:57 +0000 Subject: GFS2: Use GFP_NOFS for alloc structure This is called under a glock, so its a good plan to use GFP_NOFS Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 46534a5..503b842 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -911,7 +911,7 @@ void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd) struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip) { BUG_ON(ip->i_alloc != NULL); - ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_KERNEL); + ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_NOFS); return ip->i_alloc; } -- cgit v0.10.2 From a2fad9bf26a1d44a8d31a5c4528108a2b9f468ab Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 15:30:54 +0000 Subject: regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints The WM8350 LED driver needs to be able to enable and disable the regulators it is using. Previously the core wasn't properly enforcing status change constraints so the driver was able to function but this has always been intended to be required. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 1bbff09..e7b89e7 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1504,7 +1504,8 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, led->isink_init.consumer_supplies = &led->isink_consumer; led->isink_init.constraints.min_uA = 0; led->isink_init.constraints.max_uA = pdata->max_uA; - led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT; + led->isink_init.constraints.valid_ops_mask + = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS; led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; ret = wm8350_register_regulator(wm8350, isink, &led->isink_init); if (ret != 0) { @@ -1517,6 +1518,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, led->dcdc_init.num_consumer_supplies = 1; led->dcdc_init.consumer_supplies = &led->dcdc_consumer; led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; + led->dcdc_init.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init); if (ret != 0) { platform_device_put(pdev); -- cgit v0.10.2 From 22f4bb68b301f4ab896e9b3b0431fdde962242d2 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 26 Jan 2010 20:39:33 +0100 Subject: MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck. DBDMA descriptors need to be located at 32-byte aligned addresses; however kmalloc in conjunction with the SLAB allocator and CONFIG_DEBUG_SLUB enabled doesn't deliver any. The dbdma code works around that by allocating a larger area and realigning the start address within it. When freeing a channel however this adjustment is not taken into account which results in an oops: Kernel bug detected[#1]: [...] Call Trace: [<80186010>] cache_free_debugcheck+0x284/0x318 [<801869d8>] kfree+0xe8/0x2a0 [<8010b31c>] au1xxx_dbdma_chan_free+0x2c/0x7c [<80388dc8>] au1x_pcm_dbdma_free+0x34/0x4c [<80388fa8>] au1xpsc_pcm_close+0x28/0x38 [<80383cb8>] soc_codec_close+0x14c/0x1cc [<8036dbb4>] snd_pcm_release_substream+0x60/0xac [<8036dc40>] snd_pcm_release+0x40/0xa0 [<8018c7a8>] __fput+0x11c/0x228 [<80188f60>] filp_close+0x7c/0x98 [<80189018>] sys_close+0x9c/0xe4 [<801022a0>] stack_done+0x20/0x3c Fix this by recording the address delivered by kmalloc() and using it as parameter to kfree(). This fix is only necessary with the SLAB allocator and CONFIG_DEBUG_SLAB enabled; non-debug SLAB, SLUB do return nicely aligned addresses, debug-enabled SLUB currently panics early in the boot process. Signed-off-by: Manuel Lauss To: Linux-MIPS Cc: Manuel Lauss Patchwork: http://patchwork.linux-mips.org/patch/878/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 5c68569..f9201ca 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -412,8 +412,11 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) if (desc_base == 0) return 0; + ctp->cdb_membase = desc_base; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); - } + } else + ctp->cdb_membase = desc_base; + dp = (au1x_ddma_desc_t *)desc_base; /* Keep track of the base descriptor. */ @@ -831,7 +834,7 @@ void au1xxx_dbdma_chan_free(u32 chanid) au1xxx_dbdma_stop(chanid); - kfree((void *)ctp->chan_desc_base); + kfree((void *)ctp->cdb_membase); stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 06f68f4..d206000 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -305,6 +305,7 @@ typedef struct dbdma_chan_config { dbdev_tab_t *chan_dest; au1x_dma_chan_t *chan_ptr; au1x_ddma_desc_t *chan_desc_base; + u32 cdb_membase; /* kmalloc base of above */ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; void *chan_callparam; void (*chan_callback)(int, void *); -- cgit v0.10.2 From ba284b1f199ef7121489010da6614561a679eab6 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Sun, 31 Jan 2010 19:38:52 +0000 Subject: MIPS: AR7: Fix USB slave mem range typo Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/919/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 85169c0..f70a10a 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -202,7 +202,7 @@ static struct resource usb_res[] = { .name = "mem", .flags = IORESOURCE_MEM, .start = 0x03400000, - .end = 0x034001fff, + .end = 0x03401fff, }, }; -- cgit v0.10.2 From a996996dd75a9086b12d1cb4010f26e1748993f0 Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Fri, 29 Jan 2010 21:50:36 +1300 Subject: random: drop weird m_time/a_time manipulation No other driver does anything remotely like this that I know of except for the tty drivers, and I can't see any reason for random/urandom to do it. In fact, it's a (trivial, harmless) timing information leak. And obviously, it generates power- and flash-cycle wasting I/O, especially if combined with something like hwrngd. Also, it breaks ubifs's expectations. Signed-off-by: Matt Mackall Signed-off-by: Herbert Xu diff --git a/drivers/char/random.c b/drivers/char/random.c index 8258982..3495d64 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1051,12 +1051,6 @@ random_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) /* like a named pipe */ } - /* - * If we gave the user some bytes, update the access time. - */ - if (count) - file_accessed(file); - return (count ? count : retval); } @@ -1116,8 +1110,6 @@ static ssize_t random_write(struct file *file, const char __user *buffer, if (ret) return ret; - inode->i_mtime = current_fs_time(inode->i_sb); - mark_inode_dirty(inode); return (ssize_t)count; } -- cgit v0.10.2 From a8d7ac279743077965afeca0c9ed748507b68e89 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 1 Feb 2010 09:17:56 +1100 Subject: crypto: padlock-sha - Add import/export support As the padlock driver for SHA uses a software fallback to perform partial hashing, it must implement custom import/export functions. Otherwise hmac which depends on import/export for prehashing will not work with padlock-sha. Reported-by: Wolfgang Walter Signed-off-by: Herbert Xu diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c index 0af8057..d3a27e0 100644 --- a/drivers/crypto/padlock-sha.c +++ b/drivers/crypto/padlock-sha.c @@ -57,6 +57,23 @@ static int padlock_sha_update(struct shash_desc *desc, return crypto_shash_update(&dctx->fallback, data, length); } +static int padlock_sha_export(struct shash_desc *desc, void *out) +{ + struct padlock_sha_desc *dctx = shash_desc_ctx(desc); + + return crypto_shash_export(&dctx->fallback, out); +} + +static int padlock_sha_import(struct shash_desc *desc, const void *in) +{ + struct padlock_sha_desc *dctx = shash_desc_ctx(desc); + struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm); + + dctx->fallback.tfm = ctx->fallback; + dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP; + return crypto_shash_import(&dctx->fallback, in); +} + static inline void padlock_output_block(uint32_t *src, uint32_t *dst, size_t count) { @@ -235,7 +252,10 @@ static struct shash_alg sha1_alg = { .update = padlock_sha_update, .finup = padlock_sha1_finup, .final = padlock_sha1_final, + .export = padlock_sha_export, + .import = padlock_sha_import, .descsize = sizeof(struct padlock_sha_desc), + .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name = "sha1-padlock", @@ -256,7 +276,10 @@ static struct shash_alg sha256_alg = { .update = padlock_sha_update, .finup = padlock_sha256_finup, .final = padlock_sha256_final, + .export = padlock_sha_export, + .import = padlock_sha_import, .descsize = sizeof(struct padlock_sha_desc), + .statesize = sizeof(struct sha256_state), .base = { .cra_name = "sha256", .cra_driver_name = "sha256-padlock", -- cgit v0.10.2 From cd1510cb5f892907fe1a662f90b41fb3a42954e0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 1 Feb 2010 21:48:28 +1100 Subject: random: Remove unused inode variable The previous changeset left behind an unused inode variable. This patch removes it. Reported-by: Stephen Rothwell Signed-off-by: Herbert Xu diff --git a/drivers/char/random.c b/drivers/char/random.c index 3495d64..2849713 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1101,7 +1101,6 @@ static ssize_t random_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { size_t ret; - struct inode *inode = file->f_path.dentry->d_inode; ret = write_pool(&blocking_pool, buffer, count); if (ret) -- cgit v0.10.2 From dbead405801c8d5aa1bc21ab6e2a47f060d47c06 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Feb 2010 18:50:40 +0100 Subject: ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions Commit c98929c07a removed the clearing of the FPSCR[31:28] bits from the vfp_raise_exceptions() function and the new bits are or'ed with the old FPSCR bits leading to unexpected results (the original commit was referring to the cumulative bits - FPSCR[4:0]). Reported-by: Tom Hameenanttila Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f60a540..a63c4be 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ } /* - * Update the FPSCR with the additional exception flags. + * If any of the status flags are set, update the FPSCR. * Comparison instructions always return at least one of * these flags set. */ + if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) + fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); + fpscr |= exceptions; fmxr(FPSCR, fpscr); -- cgit v0.10.2 From 110f82d7a2e0ff5a17617a9672f1ccb7e44bc0c6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 18 Jan 2010 22:36:49 +0100 Subject: firewire: net: fix panic in fwnet_write_complete MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the transmit path of firewire-net (IPv4 over 1394), the following race condition may occur: - The networking soft IRQ inserts a datagram into the 1394 async request transmit DMA. - The 1394 async transmit completion tasklet runs to finish cleaning up (unlink datagram from list of pending ones, release skb and outbound 1394 transaction object) --- before the networking soft IRQ had a chance to proceed and add the datagram to the list of pending datagrams. This caused a panic in the 1394 async transmit completion tasklet when it dereferenced unitialized list heads: http://bugzilla.kernel.org/show_bug.cgi?id=15077 The fix is to add checks in the tx soft IRQ and in the tasklet to determine which of these two is the last referrer to the transaction object. Then handle the cleanup of the object by the last referrer rather than assuming that the tasklet is always the last one. There is another similar race: Between said tasklet and fwnet_close, i.e. at ifdown. However, that race is much less likely to occur in practice and shall be fixed in a separate update. Reported-by: Илья Басин Signed-off-by: Stefan Richter diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index cbaf420..2d3dc7d 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -893,20 +893,31 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context, static struct kmem_cache *fwnet_packet_task_cache; +static void fwnet_free_ptask(struct fwnet_packet_task *ptask) +{ + dev_kfree_skb_any(ptask->skb); + kmem_cache_free(fwnet_packet_task_cache, ptask); +} + static int fwnet_send_packet(struct fwnet_packet_task *ptask); static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask) { - struct fwnet_device *dev; + struct fwnet_device *dev = ptask->dev; unsigned long flags; - - dev = ptask->dev; + bool free; spin_lock_irqsave(&dev->lock, flags); - list_del(&ptask->pt_link); - spin_unlock_irqrestore(&dev->lock, flags); - ptask->outstanding_pkts--; /* FIXME access inside lock */ + ptask->outstanding_pkts--; + + /* Check whether we or the networking TX soft-IRQ is last user. */ + free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link)); + + if (ptask->outstanding_pkts == 0) + list_del(&ptask->pt_link); + + spin_unlock_irqrestore(&dev->lock, flags); if (ptask->outstanding_pkts > 0) { u16 dg_size; @@ -951,10 +962,10 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask) ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE; } fwnet_send_packet(ptask); - } else { - dev_kfree_skb_any(ptask->skb); - kmem_cache_free(fwnet_packet_task_cache, ptask); } + + if (free) + fwnet_free_ptask(ptask); } static void fwnet_write_complete(struct fw_card *card, int rcode, @@ -977,6 +988,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask) unsigned tx_len; struct rfc2734_header *bufhdr; unsigned long flags; + bool free; dev = ptask->dev; tx_len = ptask->max_payload; @@ -1022,12 +1034,16 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask) generation, SCODE_100, 0ULL, ptask->skb->data, tx_len + 8, fwnet_write_complete, ptask); - /* FIXME race? */ spin_lock_irqsave(&dev->lock, flags); - list_add_tail(&ptask->pt_link, &dev->broadcasted_list); + + /* If the AT tasklet already ran, we may be last user. */ + free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link)); + if (!free) + list_add_tail(&ptask->pt_link, &dev->broadcasted_list); + spin_unlock_irqrestore(&dev->lock, flags); - return 0; + goto out; } fw_send_request(dev->card, &ptask->transaction, @@ -1035,12 +1051,19 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask) ptask->generation, ptask->speed, ptask->fifo_addr, ptask->skb->data, tx_len, fwnet_write_complete, ptask); - /* FIXME race? */ spin_lock_irqsave(&dev->lock, flags); - list_add_tail(&ptask->pt_link, &dev->sent_list); + + /* If the AT tasklet already ran, we may be last user. */ + free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link)); + if (!free) + list_add_tail(&ptask->pt_link, &dev->sent_list); + spin_unlock_irqrestore(&dev->lock, flags); dev->netdev->trans_start = jiffies; + out: + if (free) + fwnet_free_ptask(ptask); return 0; } @@ -1298,6 +1321,8 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net) spin_unlock_irqrestore(&dev->lock, flags); ptask->max_payload = max_payload; + INIT_LIST_HEAD(&ptask->pt_link); + fwnet_send_packet(ptask); return NETDEV_TX_OK; -- cgit v0.10.2 From ba9e9f3c08a5b58c1ffacf0cc6fb703ab0fa55ff Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 1 Feb 2010 21:23:46 -0200 Subject: saa7146: stop DMA before de-allocating DMA scatter/gather page buffers Thanks-to: Hartmut for pointing me the problem and testing the fix. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index becbaad..5ed7526 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1333,9 +1333,9 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) DEB_CAP(("vbuf:%p\n",vb)); - release_all_pagetables(dev, buf); - saa7146_dma_free(dev,q,buf); + + release_all_pagetables(dev, buf); } static struct videobuf_queue_ops video_qops = { -- cgit v0.10.2 From e8708ef7e86a463b3a5b01d4a9abf16c8748b464 Mon Sep 17 00:00:00 2001 From: Markus Pietrek Date: Tue, 2 Feb 2010 11:29:15 +0900 Subject: spi: spi_sh_msiof: Fixed data sampling on the correct edge The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: Markus Pietrek Acked-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 51e5e1d..30973ec 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -173,15 +173,12 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, int edge; /* - * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG(!) - * 0 0 10 10 1 0 - * 0 1 10 10 0 1 - * 1 0 11 11 0 1 - * 1 1 11 11 1 0 - * - * (!) Note: REDG is inverted recommended data sheet setting + * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG + * 0 0 10 10 1 1 + * 0 1 10 10 0 0 + * 1 0 11 11 0 0 + * 1 1 11 11 1 1 */ - sh_msiof_write(p, FCTR, 0); sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); @@ -193,7 +190,7 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, edge = cpol ? cpha : !cpha; tmp |= edge << 27; /* TEDG */ - tmp |= !edge << 26; /* REDG */ + tmp |= edge << 26; /* REDG */ tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ sh_msiof_write(p, CTR, tmp); } -- cgit v0.10.2 From e5ff15bec96ba18698dae5de0bbf7e6a0653ca65 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Jan 2010 07:41:19 +0000 Subject: usb: r8a66597-hdc disable interrupts fix This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: Magnus Damm Acked-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index b7a661c..0ceec12 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -216,8 +216,17 @@ static void disable_controller(struct r8a66597 *r8a66597) { int port; + /* disable interrupts */ r8a66597_write(r8a66597, 0, INTENB0); - r8a66597_write(r8a66597, 0, INTSTS0); + r8a66597_write(r8a66597, 0, INTENB1); + r8a66597_write(r8a66597, 0, BRDYENB); + r8a66597_write(r8a66597, 0, BEMPENB); + r8a66597_write(r8a66597, 0, NRDYENB); + + /* clear status */ + r8a66597_write(r8a66597, 0, BRDYSTS); + r8a66597_write(r8a66597, 0, NRDYSTS); + r8a66597_write(r8a66597, 0, BEMPSTS); for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_disable_port(r8a66597, port); @@ -2466,6 +2475,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) r8a66597->rh_timer.data = (unsigned long)r8a66597; r8a66597->reg = (unsigned long)reg; + /* make sure no interrupts are pending */ + ret = r8a66597_clock_enable(r8a66597); + if (ret < 0) + goto clean_up3; + disable_controller(r8a66597); + for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) { INIT_LIST_HEAD(&r8a66597->pipe_queue[i]); init_timer(&r8a66597->td_timer[i]); -- cgit v0.10.2 From 00b3e0a2e059f0601feb537b995b0b4de531b543 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sat, 30 Jan 2010 22:27:41 +0100 Subject: sh: Fix access to released memory in dwarf_unwinder_cleanup() Signed-off-by: Marek Skuczynski Acked-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 3576b70..88d28ec 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -892,18 +892,18 @@ static struct unwinder dwarf_unwinder = { static void dwarf_unwinder_cleanup(void) { - struct dwarf_cie *cie; - struct dwarf_fde *fde; + struct dwarf_cie *cie, *cie_tmp; + struct dwarf_fde *fde, *fde_tmp; /* * Deallocate all the memory allocated for the DWARF unwinder. * Traverse all the FDE/CIE lists and remove and free all the * memory associated with those data structures. */ - list_for_each_entry(cie, &dwarf_cie_list, link) + list_for_each_entry_safe(cie, cie_tmp, &dwarf_cie_list, link) kfree(cie); - list_for_each_entry(fde, &dwarf_fde_list, link) + list_for_each_entry_safe(fde, fde_tmp, &dwarf_fde_list, link) kfree(fde); kmem_cache_destroy(dwarf_reg_cachep); -- cgit v0.10.2 From bc10e875d4aeaa93a0d418d8b4346b72f5067ea0 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sat, 30 Jan 2010 22:29:32 +0100 Subject: sh: Fix access to released memory in clk_debugfs_register_one() Signed-off-by: Marek Skuczynski Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index f3a46be..83da5de 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -598,7 +598,7 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child; + struct dentry *d, *child, *child_tmp; struct clk *pa = c->parent; char s[255]; char *p = s; @@ -630,7 +630,7 @@ static int clk_debugfs_register_one(struct clk *c) err_out: d = c->dentry; - list_for_each_entry(child, &d->d_subdirs, d_u.d_child) + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) debugfs_remove(child); debugfs_remove(c->dentry); return err; -- cgit v0.10.2 From 4f48f8b7fd18c44f8478174f9925cc3c059c6ce4 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 2 Feb 2010 15:32:09 +0800 Subject: tracing: Fix circular dead lock in stack trace When we cat /tracing/stack_trace, we may cause circular lock: sys_read() t_start() arch_spin_lock(&max_stack_lock); t_show() seq_printf(), vsnprintf() .... /* they are all trace-able, when they are traced, max_stack_lock may be required again. */ The following script can trigger this circular dead lock very easy: #!/bin/bash echo 1 > /proc/sys/kernel/stack_tracer_enabled mount -t debugfs xxx /mnt > /dev/null 2>&1 ( # make check_stack() zealous to require max_stack_lock for ((; ;)) { echo 1 > /mnt/tracing/stack_max_size } ) & for ((; ;)) { cat /mnt/tracing/stack_trace > /dev/null } To fix this bug, we increase the percpu trace_active before require the lock. Reported-by: Li Zefan Signed-off-by: Lai Jiangshan LKML-Reference: <4B67D4F9.9080905@cn.fujitsu.com> Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index 678a512..f4bc9b2 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -157,6 +157,7 @@ stack_max_size_write(struct file *filp, const char __user *ubuf, unsigned long val, flags; char buf[64]; int ret; + int cpu; if (count >= sizeof(buf)) return -EINVAL; @@ -171,9 +172,20 @@ stack_max_size_write(struct file *filp, const char __user *ubuf, return ret; local_irq_save(flags); + + /* + * In case we trace inside arch_spin_lock() or after (NMI), + * we will cause circular lock, so we also need to increase + * the percpu trace_active here. + */ + cpu = smp_processor_id(); + per_cpu(trace_active, cpu)++; + arch_spin_lock(&max_stack_lock); *ptr = val; arch_spin_unlock(&max_stack_lock); + + per_cpu(trace_active, cpu)--; local_irq_restore(flags); return count; @@ -206,7 +218,13 @@ t_next(struct seq_file *m, void *v, loff_t *pos) static void *t_start(struct seq_file *m, loff_t *pos) { + int cpu; + local_irq_disable(); + + cpu = smp_processor_id(); + per_cpu(trace_active, cpu)++; + arch_spin_lock(&max_stack_lock); if (*pos == 0) @@ -217,7 +235,13 @@ static void *t_start(struct seq_file *m, loff_t *pos) static void t_stop(struct seq_file *m, void *p) { + int cpu; + arch_spin_unlock(&max_stack_lock); + + cpu = smp_processor_id(); + per_cpu(trace_active, cpu)--; + local_irq_enable(); } -- cgit v0.10.2 From 55bdeed9f67a92f184e1ddcdd722e622d9dd10c6 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 2 Feb 2010 07:48:40 -0800 Subject: be2net: use eq-id to calculate cev-isr reg offset cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6f26338..626b76c 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev) int isr; isr = ioread32(adapter->csr + CEV_ISR0_OFFSET + - be_pci_func(adapter) * CEV_ISR_SIZE); + (adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE); if (!isr) return IRQ_NONE; -- cgit v0.10.2 From 91dfc423cc8cfd399fb308a837102a7ab7fa067e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 2 Feb 2010 08:52:20 -0800 Subject: MIPS: 64-bit: Detect virtual memory size Linux kernel 2.6.32 and later allocate address space from the top of the kernel virtual memory address space. This patch implements virtual memory size detection for 64 bit MIPS CPUs to avoid resulting crashes. Signed-off-by: Guenter Roeck Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/935/ Reviewed-by: David Daney Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 1f4df64..272c5ef 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -191,6 +191,9 @@ # ifndef cpu_has_64bit_addresses # define cpu_has_64bit_addresses 0 # endif +# ifndef cpu_vmbits +# define cpu_vmbits 31 +# endif #endif #ifdef CONFIG_64BIT @@ -209,6 +212,10 @@ # ifndef cpu_has_64bit_addresses # define cpu_has_64bit_addresses 1 # endif +# ifndef cpu_vmbits +# define cpu_vmbits cpu_data[0].vmbits +# define __NEED_VMBITS_PROBE +# endif #endif #if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint) diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 1260443..b39def3 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -58,6 +58,9 @@ struct cpuinfo_mips { struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ int core; /* physical core number */ +#ifdef CONFIG_64BIT + int vmbits; /* Virtual memory size in bits */ +#endif #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 9cd5089..8eda30b 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -110,7 +110,9 @@ #define VMALLOC_START MAP_BASE #define VMALLOC_END \ (VMALLOC_START + \ - PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32)) + min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \ + (1UL << cpu_vmbits)) - (1UL << 32)) + #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ VMALLOC_START != CKSSEG /* Load modules into 32bit-compatible segment. */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 80e202e..9c187a6 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -284,6 +284,15 @@ static inline int __cpu_has_fpu(void) return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE); } +static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) +{ +#ifdef __NEED_VMBITS_PROBE + write_c0_entryhi(0x3ffffffffffff000ULL); + back_to_back_c0_hazard(); + c->vmbits = fls64(read_c0_entryhi() & 0x3ffffffffffff000ULL); +#endif +} + #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ | MIPS_CPU_COUNTER) @@ -969,6 +978,8 @@ __cpuinit void cpu_probe(void) c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; else c->srsets = 1; + + cpu_probe_vmbits(c); } __cpuinit void cpu_report(void) -- cgit v0.10.2 From 1efe8fe1c2240acc476bed77740883df63373862 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 2 Feb 2010 20:45:46 +0100 Subject: cfq-iosched: Do not idle on async queues Few weeks back, Shaohua Li had posted similar patch. I am reposting it with more test results. This patch does two things. - Do not idle on async queues. - It also changes the write queue depth CFQ drives (cfq_may_dispatch()). Currently, we seem to driving queue depth of 1 always for WRITES. This is true even if there is only one write queue in the system and all the logic of infinite queue depth in case of single busy queue as well as slowly increasing queue depth based on last delayed sync request does not seem to be kicking in at all. This patch will allow deeper WRITE queue depths (subjected to the other WRITE queue depth contstraints like cfq_quantum and last delayed sync request). Shaohua Li had reported getting more out of his SSD. For me, I have got one Lun exported from an HP EVA and when pure buffered writes are on, I can get more out of the system. Following are test results of pure buffered writes (with end_fsync=1) with vanilla and patched kernel. These results are average of 3 sets of run with increasing number of threads. AVERAGE[bufwfs][vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- bufwfs 3 1 0 0 95349 474141 bufwfs 3 2 0 0 100282 806926 bufwfs 3 4 0 0 109989 2.7301e+06 bufwfs 3 8 0 0 116642 3762231 bufwfs 3 16 0 0 118230 6902970 AVERAGE[bufwfs] [patched kernel] ------- bufwfs 3 1 0 0 270722 404352 bufwfs 3 2 0 0 206770 1.06552e+06 bufwfs 3 4 0 0 195277 1.62283e+06 bufwfs 3 8 0 0 260960 2.62979e+06 bufwfs 3 16 0 0 299260 1.70731e+06 I also ran buffered writes along with some sequential reads and some buffered reads going on in the system on a SATA disk because the potential risk could be that we should not be driving queue depth higher in presence of sync IO going to keep the max clat low. With some random and sequential reads going on in the system on one SATA disk I did not see any significant increase in max clat. So it looks like other WRITE queue depth control logic is doing its job. Here are the results. AVERAGE[brr, bsr, bufw together] [vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 850 546345 0 0 bsr 3 1 14650 729543 0 0 bufw 3 1 0 0 23908 8274517 brr 3 2 981.333 579395 0 0 bsr 3 2 14149.7 1175689 0 0 bufw 3 2 0 0 21921 1.28108e+07 brr 3 4 898.333 1.75527e+06 0 0 bsr 3 4 12230.7 1.40072e+06 0 0 bufw 3 4 0 0 19722.3 2.4901e+07 brr 3 8 900 3160594 0 0 bsr 3 8 9282.33 1.91314e+06 0 0 bufw 3 8 0 0 18789.3 23890622 AVERAGE[brr, bsr, bufw mixed] [patched kernel] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 837 417973 0 0 bsr 3 1 14357.7 591275 0 0 bufw 3 1 0 0 24869.7 8910662 brr 3 2 1038.33 543434 0 0 bsr 3 2 13351.3 1205858 0 0 bufw 3 2 0 0 18626.3 13280370 brr 3 4 913 1.86861e+06 0 0 bsr 3 4 12652.3 1430974 0 0 bufw 3 4 0 0 15343.3 2.81305e+07 brr 3 8 890 2.92695e+06 0 0 bsr 3 8 9635.33 1.90244e+06 0 0 bufw 3 8 0 0 17200.3 24424392 So looks like it might make sense to include this patch. Thanks Vivek Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ee130f1..17b768d0 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1803,7 +1803,7 @@ static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq) * Otherwise, we do only if they are the last ones * in their service tree. */ - return service_tree->count == 1; + return service_tree->count == 1 && cfq_cfqq_sync(cfqq); } static void cfq_arm_slice_timer(struct cfq_data *cfqd) -- cgit v0.10.2 From 7ab02af428c2d312c0cf8fb0b01cc1eb21131a3d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 2 Feb 2010 12:37:44 -0800 Subject: Fix 'flush_old_exec()/setup_new_exec()' split Commit 221af7f87b9 ("Split 'flush_old_exec' into two functions") split the function at the point of no return - ie right where there were no more error cases to check. That made sense from a technical standpoint, but when we then also combined it with the actual personality setting going in between flush_old_exec() and setup_new_exec(), it needs to be a bit more careful. In particular, we need to make sure that we really flush the old personality bits in the 'flush' stage, rather than later in the 'setup' stage, since otherwise we might be flushing the _new_ personality state that we're just setting up. So this moves the flags and personality flushing (and 'flush_thread()', which is the arch-specific function that generally resets lazy FP state etc) of the old process into flush_old_exec(), so that it doesn't affect any state that execve() is setting up for the new process environment. This was reported by Michal Simek as breaking his Microblaze qemu environment. Reported-and-tested-by: Michal Simek Cc: Peter Anvin Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 675c3f4..0790a107 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -961,6 +961,11 @@ int flush_old_exec(struct linux_binprm * bprm) goto out; bprm->mm = NULL; /* We're using it now */ + + current->flags &= ~PF_RANDOMIZE; + flush_thread(); + current->personality &= ~bprm->per_clear; + return 0; out: @@ -997,9 +1002,6 @@ void setup_new_exec(struct linux_binprm * bprm) tcomm[i] = '\0'; set_task_comm(current, tcomm); - current->flags &= ~PF_RANDOMIZE; - flush_thread(); - /* Set the new mm task size. We have to do that late because it may * depend on TIF_32BIT which is only updated in flush_thread() on * some architectures like powerpc @@ -1015,8 +1017,6 @@ void setup_new_exec(struct linux_binprm * bprm) set_dumpable(current->mm, suid_dumpable); } - current->personality &= ~bprm->per_clear; - /* * Flush performance counters when crossing a * security domain: -- cgit v0.10.2 From de5604231ce4bc8db1bc1dcd27d8540cbedf1518 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 1 Feb 2010 22:24:18 +1100 Subject: mm: percpu-vmap fix RCU list walking RCU list walking of the per-cpu vmap cache was broken. It did not use RCU primitives, and also the union of free_list and rcu_head is obviously wrong (because free_list is indeed the list we are RCU walking). While we are there, remove a couple of unused fields from an earlier iteration. These APIs aren't actually used anywhere, because of problems with the XFS conversion. Christoph has now verified that the problems are solved with these patches. Also it is an exported interface, so I think it will be good to be merged now (and Christoph wants to get the XFS changes into their local tree). Cc: stable@kernel.org Cc: linux-mm@kvack.org Tested-by: Christoph Hellwig Signed-off-by: Nick Piggin -- Signed-off-by: Linus Torvalds diff --git a/mm/vmalloc.c b/mm/vmalloc.c index d55d905..cf76ff6 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -667,8 +667,6 @@ static bool vmap_initialized __read_mostly = false; struct vmap_block_queue { spinlock_t lock; struct list_head free; - struct list_head dirty; - unsigned int nr_dirty; }; struct vmap_block { @@ -678,10 +676,8 @@ struct vmap_block { unsigned long free, dirty; DECLARE_BITMAP(alloc_map, VMAP_BBMAP_BITS); DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS); - union { - struct list_head free_list; - struct rcu_head rcu_head; - }; + struct list_head free_list; + struct rcu_head rcu_head; }; /* Queue of free and dirty vmap blocks, for allocation and flushing purposes */ @@ -757,7 +753,7 @@ static struct vmap_block *new_vmap_block(gfp_t gfp_mask) vbq = &get_cpu_var(vmap_block_queue); vb->vbq = vbq; spin_lock(&vbq->lock); - list_add(&vb->free_list, &vbq->free); + list_add_rcu(&vb->free_list, &vbq->free); spin_unlock(&vbq->lock); put_cpu_var(vmap_block_queue); @@ -776,8 +772,6 @@ static void free_vmap_block(struct vmap_block *vb) struct vmap_block *tmp; unsigned long vb_idx; - BUG_ON(!list_empty(&vb->free_list)); - vb_idx = addr_to_vb_idx(vb->va->va_start); spin_lock(&vmap_block_tree_lock); tmp = radix_tree_delete(&vmap_block_tree, vb_idx); @@ -816,7 +810,7 @@ again: vb->free -= 1UL << order; if (vb->free == 0) { spin_lock(&vbq->lock); - list_del_init(&vb->free_list); + list_del_rcu(&vb->free_list); spin_unlock(&vbq->lock); } spin_unlock(&vb->lock); @@ -860,11 +854,11 @@ static void vb_free(const void *addr, unsigned long size) BUG_ON(!vb); spin_lock(&vb->lock); - bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order); + BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order)); vb->dirty += 1UL << order; if (vb->dirty == VMAP_BBMAP_BITS) { - BUG_ON(vb->free || !list_empty(&vb->free_list)); + BUG_ON(vb->free); spin_unlock(&vb->lock); free_vmap_block(vb); } else @@ -1033,8 +1027,6 @@ void __init vmalloc_init(void) vbq = &per_cpu(vmap_block_queue, i); spin_lock_init(&vbq->lock); INIT_LIST_HEAD(&vbq->free); - INIT_LIST_HEAD(&vbq->dirty); - vbq->nr_dirty = 0; } /* Import existing vmlist entries. */ -- cgit v0.10.2 From 02b709df817c0db174f249cc59e5f7fd01b64d92 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 1 Feb 2010 22:25:57 +1100 Subject: mm: purge fragmented percpu vmap blocks Improve handling of fragmented per-CPU vmaps. We previously don't free up per-CPU maps until all its addresses have been used and freed. So fragmented blocks could fill up vmalloc space even if they actually had no active vmap regions within them. Add some logic to allow all CPUs to have these blocks purged in the case of failure to allocate a new vm area, and also put some logic to trim such blocks of a current CPU if we hit them in the allocation path (so as to avoid a large build up of them). Christoph reported some vmap allocation failures when using the per CPU vmap APIs in XFS, which cannot be reproduced after this patch and the previous bug fix. Cc: linux-mm@kvack.org Cc: stable@kernel.org Tested-by: Christoph Hellwig Signed-off-by: Nick Piggin -- Signed-off-by: Linus Torvalds diff --git a/mm/vmalloc.c b/mm/vmalloc.c index cf76ff6..ae00746 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -509,6 +509,9 @@ static unsigned long lazy_max_pages(void) static atomic_t vmap_lazy_nr = ATOMIC_INIT(0); +/* for per-CPU blocks */ +static void purge_fragmented_blocks_allcpus(void); + /* * Purges all lazily-freed vmap areas. * @@ -539,6 +542,9 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, } else spin_lock(&purge_lock); + if (sync) + purge_fragmented_blocks_allcpus(); + rcu_read_lock(); list_for_each_entry_rcu(va, &vmap_area_list, list) { if (va->flags & VM_LAZY_FREE) { @@ -678,6 +684,7 @@ struct vmap_block { DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS); struct list_head free_list; struct rcu_head rcu_head; + struct list_head purge; }; /* Queue of free and dirty vmap blocks, for allocation and flushing purposes */ @@ -782,12 +789,61 @@ static void free_vmap_block(struct vmap_block *vb) call_rcu(&vb->rcu_head, rcu_free_vb); } +static void purge_fragmented_blocks(int cpu) +{ + LIST_HEAD(purge); + struct vmap_block *vb; + struct vmap_block *n_vb; + struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu); + + rcu_read_lock(); + list_for_each_entry_rcu(vb, &vbq->free, free_list) { + + if (!(vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS)) + continue; + + spin_lock(&vb->lock); + if (vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS) { + vb->free = 0; /* prevent further allocs after releasing lock */ + vb->dirty = VMAP_BBMAP_BITS; /* prevent purging it again */ + bitmap_fill(vb->alloc_map, VMAP_BBMAP_BITS); + bitmap_fill(vb->dirty_map, VMAP_BBMAP_BITS); + spin_lock(&vbq->lock); + list_del_rcu(&vb->free_list); + spin_unlock(&vbq->lock); + spin_unlock(&vb->lock); + list_add_tail(&vb->purge, &purge); + } else + spin_unlock(&vb->lock); + } + rcu_read_unlock(); + + list_for_each_entry_safe(vb, n_vb, &purge, purge) { + list_del(&vb->purge); + free_vmap_block(vb); + } +} + +static void purge_fragmented_blocks_thiscpu(void) +{ + purge_fragmented_blocks(smp_processor_id()); +} + +static void purge_fragmented_blocks_allcpus(void) +{ + int cpu; + + for_each_possible_cpu(cpu) + purge_fragmented_blocks(cpu); +} + static void *vb_alloc(unsigned long size, gfp_t gfp_mask) { struct vmap_block_queue *vbq; struct vmap_block *vb; unsigned long addr = 0; unsigned int order; + int purge = 0; BUG_ON(size & ~PAGE_MASK); BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC); @@ -800,24 +856,38 @@ again: int i; spin_lock(&vb->lock); + if (vb->free < 1UL << order) + goto next; + i = bitmap_find_free_region(vb->alloc_map, VMAP_BBMAP_BITS, order); - if (i >= 0) { - addr = vb->va->va_start + (i << PAGE_SHIFT); - BUG_ON(addr_to_vb_idx(addr) != - addr_to_vb_idx(vb->va->va_start)); - vb->free -= 1UL << order; - if (vb->free == 0) { - spin_lock(&vbq->lock); - list_del_rcu(&vb->free_list); - spin_unlock(&vbq->lock); + if (i < 0) { + if (vb->free + vb->dirty == VMAP_BBMAP_BITS) { + /* fragmented and no outstanding allocations */ + BUG_ON(vb->dirty != VMAP_BBMAP_BITS); + purge = 1; } - spin_unlock(&vb->lock); - break; + goto next; } + addr = vb->va->va_start + (i << PAGE_SHIFT); + BUG_ON(addr_to_vb_idx(addr) != + addr_to_vb_idx(vb->va->va_start)); + vb->free -= 1UL << order; + if (vb->free == 0) { + spin_lock(&vbq->lock); + list_del_rcu(&vb->free_list); + spin_unlock(&vbq->lock); + } + spin_unlock(&vb->lock); + break; +next: spin_unlock(&vb->lock); } + + if (purge) + purge_fragmented_blocks_thiscpu(); + put_cpu_var(vmap_block_queue); rcu_read_unlock(); -- cgit v0.10.2 From adef477268ff5ddd0195611dc7e26d7a879fefe1 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 26 Jan 2010 10:26:06 +0100 Subject: dmaengine: fix memleak in dma_async_device_unregister While debugging a dma driver I noticed a memleak after unloading the driver module. Caught by kmemleak. Signed-off-by: Anatolij Gustschin Cc: Maciej Sosnowski Signed-off-by: Dan Williams diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 6f51a0a..e7a3230 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -826,6 +826,7 @@ void dma_async_device_unregister(struct dma_device *device) chan->dev->chan = NULL; mutex_unlock(&dma_list_mutex); device_unregister(&chan->dev->device); + free_percpu(chan->local); } } EXPORT_SYMBOL(dma_async_device_unregister); -- cgit v0.10.2 From b8a1d37c5f981cdd2e83c9fd98198832324cd57a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 3 Feb 2010 09:31:36 +1100 Subject: kernel/cred.c: use kmem_cache_free Free memory allocated using kmem_cache_zalloc using kmem_cache_free rather than kfree. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) // Signed-off-by: Julia Lawall Acked-by: David Howells Cc: James Morris Cc: Steve Dickson Cc: Signed-off-by: Andrew Morton Signed-off-by: James Morris diff --git a/kernel/cred.c b/kernel/cred.c index dd76cfe..1ed8ca1 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -224,7 +224,7 @@ struct cred *cred_alloc_blank(void) #ifdef CONFIG_KEYS new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL); if (!new->tgcred) { - kfree(new); + kmem_cache_free(cred_jar, new); return NULL; } atomic_set(&new->tgcred->usage, 1); -- cgit v0.10.2 From f98bfbd78c37c5946cc53089da32a5f741efdeb7 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 2 Feb 2010 15:58:48 -0800 Subject: connector: Delete buggy notification code. On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer , who found a bug in the code. Signed-off-by: Evgeniy Polyakov Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index f060246..537c29a 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -36,17 +36,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector."); -static u32 cn_idx = CN_IDX_CONNECTOR; -static u32 cn_val = CN_VAL_CONNECTOR; - -module_param(cn_idx, uint, 0); -module_param(cn_val, uint, 0); -MODULE_PARM_DESC(cn_idx, "Connector's main device idx."); -MODULE_PARM_DESC(cn_val, "Connector's main device val."); - -static DEFINE_MUTEX(notify_lock); -static LIST_HEAD(notify_list); - static struct cn_dev cdev; static int cn_already_initialized; @@ -210,54 +199,6 @@ static void cn_rx_skb(struct sk_buff *__skb) } /* - * Notification routing. - * - * Gets id and checks if there are notification request for it's idx - * and val. If there are such requests notify the listeners with the - * given notify event. - * - */ -static void cn_notify(struct cb_id *id, u32 notify_event) -{ - struct cn_ctl_entry *ent; - - mutex_lock(¬ify_lock); - list_for_each_entry(ent, ¬ify_list, notify_entry) { - int i; - struct cn_notify_req *req; - struct cn_ctl_msg *ctl = ent->msg; - int idx_found, val_found; - - idx_found = val_found = 0; - - req = (struct cn_notify_req *)ctl->data; - for (i = 0; i < ctl->idx_notify_num; ++i, ++req) { - if (id->idx >= req->first && - id->idx < req->first + req->range) { - idx_found = 1; - break; - } - } - - for (i = 0; i < ctl->val_notify_num; ++i, ++req) { - if (id->val >= req->first && - id->val < req->first + req->range) { - val_found = 1; - break; - } - } - - if (idx_found && val_found) { - struct cn_msg m = { .ack = notify_event, }; - - memcpy(&m.id, id, sizeof(m.id)); - cn_netlink_send(&m, ctl->group, GFP_KERNEL); - } - } - mutex_unlock(¬ify_lock); -} - -/* * Callback add routing - adds callback with given ID and name. * If there is registered callback with the same ID it will not be added. * @@ -276,8 +217,6 @@ int cn_add_callback(struct cb_id *id, char *name, if (err) return err; - cn_notify(id, 0); - return 0; } EXPORT_SYMBOL_GPL(cn_add_callback); @@ -295,111 +234,9 @@ void cn_del_callback(struct cb_id *id) struct cn_dev *dev = &cdev; cn_queue_del_callback(dev->cbdev, id); - cn_notify(id, 1); } EXPORT_SYMBOL_GPL(cn_del_callback); -/* - * Checks two connector's control messages to be the same. - * Returns 1 if they are the same or if the first one is corrupted. - */ -static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2) -{ - int i; - struct cn_notify_req *req1, *req2; - - if (m1->idx_notify_num != m2->idx_notify_num) - return 0; - - if (m1->val_notify_num != m2->val_notify_num) - return 0; - - if (m1->len != m2->len) - return 0; - - if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) != - m1->len) - return 1; - - req1 = (struct cn_notify_req *)m1->data; - req2 = (struct cn_notify_req *)m2->data; - - for (i = 0; i < m1->idx_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - for (i = 0; i < m1->val_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - return 1; -} - -/* - * Main connector device's callback. - * - * Used for notification of a request's processing. - */ -static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct cn_ctl_msg *ctl; - struct cn_ctl_entry *ent; - u32 size; - - if (msg->len < sizeof(*ctl)) - return; - - ctl = (struct cn_ctl_msg *)msg->data; - - size = (sizeof(*ctl) + ((ctl->idx_notify_num + - ctl->val_notify_num) * - sizeof(struct cn_notify_req))); - - if (msg->len != size) - return; - - if (ctl->len + sizeof(*ctl) != msg->len) - return; - - /* - * Remove notification. - */ - if (ctl->group == 0) { - struct cn_ctl_entry *n; - - mutex_lock(¬ify_lock); - list_for_each_entry_safe(ent, n, ¬ify_list, notify_entry) { - if (cn_ctl_msg_equals(ent->msg, ctl)) { - list_del(&ent->notify_entry); - kfree(ent); - } - } - mutex_unlock(¬ify_lock); - - return; - } - - size += sizeof(*ent); - - ent = kzalloc(size, GFP_KERNEL); - if (!ent) - return; - - ent->msg = (struct cn_ctl_msg *)(ent + 1); - - memcpy(ent->msg, ctl, size - sizeof(*ent)); - - mutex_lock(¬ify_lock); - list_add(&ent->notify_entry, ¬ify_list); - mutex_unlock(¬ify_lock); -} - static int cn_proc_show(struct seq_file *m, void *v) { struct cn_queue_dev *dev = cdev.cbdev; @@ -437,11 +274,8 @@ static const struct file_operations cn_file_ops = { static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; - int err; dev->input = cn_rx_skb; - dev->id.idx = cn_idx; - dev->id.val = cn_val; dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR, CN_NETLINK_USERS + 0xf, @@ -457,14 +291,6 @@ static int __devinit cn_init(void) cn_already_initialized = 1; - err = cn_add_callback(&dev->id, "connector", &cn_callback); - if (err) { - cn_already_initialized = 0; - cn_queue_free_dev(dev->cbdev); - netlink_kernel_release(dev->nls); - return -EINVAL; - } - proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); return 0; @@ -478,7 +304,6 @@ static void __devexit cn_fini(void) proc_net_remove(&init_net, "connector"); - cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); } diff --git a/include/linux/connector.h b/include/linux/connector.h index 72ba63e..3a779ff 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -24,9 +24,6 @@ #include -#define CN_IDX_CONNECTOR 0xffffffff -#define CN_VAL_CONNECTOR 0xffffffff - /* * Process Events connector unique ids -- used for message routing */ @@ -75,30 +72,6 @@ struct cn_msg { __u8 data[0]; }; -/* - * Notify structure - requests notification about - * registering/unregistering idx/val in range [first, first+range]. - */ -struct cn_notify_req { - __u32 first; - __u32 range; -}; - -/* - * Main notification control message - * *_notify_num - number of appropriate cn_notify_req structures after - * this struct. - * group - notification receiver's idx. - * len - total length of the attached data. - */ -struct cn_ctl_msg { - __u32 idx_notify_num; - __u32 val_notify_num; - __u32 group; - __u32 len; - __u8 data[0]; -}; - #ifdef __KERNEL__ #include @@ -151,11 +124,6 @@ struct cn_callback_entry { u32 seq, group; }; -struct cn_ctl_entry { - struct list_head notify_entry; - struct cn_ctl_msg *msg; -}; - struct cn_dev { struct cb_id id; -- cgit v0.10.2 From ab09809f2eee1dc2d8f8bea636e77d176ba6c648 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 2 Feb 2010 14:38:12 -0800 Subject: x86, doc: Fix minor spelling error in arch/x86/mm/gup.c Fix minor spelling error in comment. No code change. Signed-off-by: Andy Shevchenko LKML-Reference: <201002022238.o12McDiF018720@imap1.linux-foundation.org> Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 71da1bc..738e659 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -18,7 +18,7 @@ static inline pte_t gup_get_pte(pte_t *ptep) #else /* * With get_user_pages_fast, we walk down the pagetables without taking - * any locks. For this we would like to load the pointers atoimcally, + * any locks. For this we would like to load the pointers atomically, * but that is not possible (without expensive cmpxchg8b) on PAE. What * we do have is the guarantee that a pte will only either go from not * present to present, or present to not present or both -- it will not -- cgit v0.10.2 From 859ddf09743a8cc680af33f7259ccd0fd36bfe9d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 2 Feb 2010 13:43:58 -0800 Subject: idr: fix a critical misallocation bug Eric Paris located a bug in idr. With IDR_BITS of 6, it grows to three layers when id 4096 is first allocated. When that happens, idr wraps incorrectly and searches the idr array ignoring the high bits. The following test code from Eric demonstrates the bug nicely. #include #include #include static DEFINE_IDR(test_idr); int init_module(void) { int ret, forty95, forty96; void *addr; /* add 2 entries both with 4095 as the start address */ again1: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4095, 4095, &forty95); if (ret) { if (ret == -EAGAIN) goto again1; return ret; } if (forty95 != 4095) printk(KERN_ERR "hmmm, forty95=%d\n", forty95); again2: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4096, 4095, &forty96); if (ret) { if (ret == -EAGAIN) goto again2; return ret; } if (forty96 != 4096) printk(KERN_ERR "hmmm, forty96=%d\n", forty96); /* try to find the 2 entries, noticing that 4096 broke */ addr = idr_find(&test_idr, forty95); if ((int)addr != forty95) printk(KERN_ERR "hmmm, after find forty95=%d addr=%d\n", forty95, (int)addr); addr = idr_find(&test_idr, forty96); if ((int)addr != forty96) printk(KERN_ERR "hmmm, after find forty96=%d addr=%d\n", forty96, (int)addr); /* really weird, the entry which should be at 4096 is actually at 0!! */ addr = idr_find(&test_idr, 0); if ((int)addr) printk(KERN_ERR "found an entry at id=0 for addr=%d\n", (int)addr); idr_remove(&test_idr, forty95); idr_remove(&test_idr, forty96); return 0; } void cleanup_module(void) { } MODULE_AUTHOR("Eric Paris "); MODULE_DESCRIPTION("Simple idr test"); MODULE_LICENSE("GPL"); This happens because when sub_alloc() back tracks it doesn't always do it step-by-step while the over-the-limit detection assumes step-by-step backtracking. The logic in sub_alloc() looks like the following. restart: clear pa[top level + 1] for end cond detection l = top level while (true) { search for empty slot at this level if (not found) { push id to the next possible value l++ A: if (pa[l] is clear) failed, return asking caller to grow the tree if (going up 1 level gives more slots to search) continue the while loop above with the incremented l else C: goto restart } adjust id accordingly to the found slot if (l == 0) return found id; create lower level if not there yet record pa[l] and l-- } Test A is the fail exit condition but this assumes that failure is propagated upwared one level at a time but the B optimization path breaks the assumption and restarts the whole thing with a start value which is above the possible limit with the current layers. sub_alloc() assumes the start id value is inside the limit when called and test A is the only exit condition check, so it ends up searching for empty slot while ignoring high set bit. So, for 4095->4096 test, level0 search fails but pa[1] contains a valid pointer. However, going up 1 level wouldn't give any more empty slot so it takes C and when the whole thing restarts nobody notices the high bit set beyond the top level. This patch fixes the bug by changing the fail exit condition check to full id limit check. Based-on-patch-from: Eric Paris Reported-by: Eric Paris Signed-off-by: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/idr.c b/lib/idr.c index 1cac726..ba7d37c 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -140,8 +140,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = *starting_id; restart: p = idp->top; - l = idp->layers; - pa[l--] = NULL; + l = p->layer; while (1) { /* * We run around this while until we reach the leaf node... @@ -155,8 +154,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) oid = id; id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; - /* if already at the top layer, we need to grow */ - if (!(p = pa[l])) { + /* did id go over the limit? */ + if (id >= (1 << (idp->layers * IDR_BITS))) { *starting_id = id; return IDR_NEED_TO_GROW; } -- cgit v0.10.2 From b3cb53721890879d7bde31f5f9eefd4edf41ab64 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: mx3fb: some debug and initialisation fixes Fix the kernel oops when dev_dbg is called with mx3_fbi->txd == NULL Fix the late initialisation of mx3fb->backlight_level. If not, in the chain of function started by init_fb_chan(), in __blank() call sdc_set_brightness(mx3fb, mx3fb->backlight_level) that will shut down the CONTRAST PWM output. Signed-off-by: Alberto Panizzo Acked-by: Guennadi Liakhovetski gmx.de> Cc: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 054ef29..772ba3f 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -324,8 +324,11 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) unsigned long flags; dma_cookie_t cookie; - dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, - to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + if (mx3_fbi->txd) + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + else + dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi); /* This enables the channel */ if (mx3_fbi->cookie < 0) { @@ -646,6 +649,7 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) { + dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value); /* This might be board-specific */ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); return; @@ -1486,12 +1490,12 @@ static int mx3fb_probe(struct platform_device *pdev) goto ersdc0; } + mx3fb->backlight_level = 255; + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); if (ret < 0) goto eisdc0; - mx3fb->backlight_level = 255; - return 0; eisdc0: -- cgit v0.10.2 From f4b5162820de60204afa5c8639335f4931b7fb0c Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: rtc-fm3130: add missing braces Add missing braces for multiline 'if' statements in fm3130_probe. Signed-off-by: Sergey Matyukevich Signed-off-by: Alessandro Zummo Cc: Sergey Lapin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 3a7be11..812c667 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -376,20 +376,22 @@ static int __devinit fm3130_probe(struct i2c_client *client, } /* Disabling calibration mode */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_CAL)); dev_warn(&client->dev, "Disabling calibration mode!\n"); + } /* Disabling read and write modes */ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || - fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_READ | FM3130_RTC_CONTROL_BIT_WRITE)); dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + } /* oscillator off? turn it on, so clock can tick. */ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) -- cgit v0.10.2 From bc173f7092c76a7967f135c2b3a54052ad99733b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 2 Feb 2010 13:44:01 -0800 Subject: kfifo: fix kernel-doc notation Fix kfifo kernel-doc warnings: Warning(kernel/kfifo.c:361): No description found for parameter 'total' Warning(kernel/kfifo.c:402): bad line: @ @lenout: pointer to output variable with copied data Warning(kernel/kfifo.c:412): No description found for parameter 'lenout' Signed-off-by: Randy Dunlap Cc: Stefani Seibold Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 32c5c15..498cabb 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -349,6 +349,7 @@ EXPORT_SYMBOL(__kfifo_from_user_n); * @fifo: the fifo to be used. * @from: pointer to the data to be added. * @len: the length of the data to be added. + * @total: the actual returned data length. * * This function copies at most @len bytes from the @from into the * FIFO depending and returns -EFAULT/0. @@ -399,7 +400,7 @@ EXPORT_SYMBOL(__kfifo_to_user_n); * @fifo: the fifo to be used. * @to: where the data must be copied. * @len: the size of the destination buffer. - @ @lenout: pointer to output variable with copied data + * @lenout: pointer to output variable with copied data * * This function copies at most @len bytes from the FIFO into the * @to buffer and 0 or -EFAULT. -- cgit v0.10.2 From 931e80e4b3263db75c8e34f078d22f11bbabd3a3 Mon Sep 17 00:00:00 2001 From: anfei zhou Date: Tue, 2 Feb 2010 13:44:02 -0800 Subject: mm: flush dcache before writing into page to avoid alias The cache alias problem will happen if the changes of user shared mapping is not flushed before copying, then user and kernel mapping may be mapped into two different cache line, it is impossible to guarantee the coherence after iov_iter_copy_from_user_atomic. So the right steps should be: flush_dcache_page(page); kmap_atomic(page); write to page; kunmap_atomic(page); flush_dcache_page(page); More precisely, we might create two new APIs flush_dcache_user_page and flush_dcache_kern_page to replace the two flush_dcache_page accordingly. Here is a snippet tested on omap2430 with VIPT cache, and I think it is not ARM-specific: int val = 0x11111111; fd = open("abc", O_RDWR); addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *(addr+0) = 0x44444444; tmp = *(addr+0); *(addr+1) = 0x77777777; write(fd, &val, sizeof(int)); close(fd); The results are not always 0x11111111 0x77777777 at the beginning as expected. Sometimes we see 0x44444444 0x77777777. Signed-off-by: Anfei Cc: Russell King Cc: Miklos Szeredi Cc: Nick Piggin Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/fuse/file.c b/fs/fuse/file.c index c18913a..a9f5e13 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -828,6 +828,9 @@ static ssize_t fuse_fill_write_pages(struct fuse_req *req, if (!page) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes); pagefault_enable(); diff --git a/mm/filemap.c b/mm/filemap.c index e373692..698ea80 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2232,6 +2232,9 @@ again: if (unlikely(status)) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes); pagefault_enable(); -- cgit v0.10.2 From 325fda71d0badc1073dc59f12a948f24ff05796a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 2 Feb 2010 13:44:05 -0800 Subject: devmem: check vmalloc address on kmem read/write Otherwise vmalloc_to_page() will BUG(). This also makes the kmem read/write implementation aligned with mem(4): "References to nonexistent locations cause errors to be returned." Here we return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from user space, otherwise return partial read/write results. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Wu Fengguang Cc: Greg Kroah-Hartman Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/mem.c b/drivers/char/mem.c index be832b6..1fd4b11 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -395,6 +395,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf, unsigned long p = *ppos; ssize_t low_count, read, sz; char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ + int err = 0; read = 0; if (p < (unsigned long) high_memory) { @@ -441,12 +442,16 @@ static ssize_t read_kmem(struct file *file, char __user *buf, return -ENOMEM; while (count > 0) { sz = size_inside_page(p, count); + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } sz = vread(kbuf, (char *)p, sz); if (!sz) break; if (copy_to_user(buf, kbuf, sz)) { - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } count -= sz; buf += sz; @@ -455,8 +460,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf, } free_page((unsigned long)kbuf); } - *ppos = p; - return read; + *ppos = p; + return read ? read : err; } @@ -520,6 +525,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, ssize_t wrote = 0; ssize_t virtr = 0; char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ + int err = 0; if (p < (unsigned long) high_memory) { unsigned long to_write = min_t(unsigned long, count, @@ -540,12 +546,14 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, unsigned long sz = size_inside_page(p, count); unsigned long n; + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } n = copy_from_user(kbuf, buf, sz); if (n) { - if (wrote + virtr) - break; - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } sz = vwrite(kbuf, (char *)p, sz); count -= sz; @@ -556,8 +564,8 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, free_page((unsigned long)kbuf); } - *ppos = p; - return virtr + wrote; + *ppos = p; + return virtr + wrote ? : err; } #endif -- cgit v0.10.2 From c85e9a97c4102ce2e83112da850d838cfab5ab13 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 2 Feb 2010 13:44:06 -0800 Subject: devmem: fix kmem write bug on memory holes write_kmem() used to assume vwrite() always return the full buffer length. However now vwrite() could return 0 to indicate memory hole. This creates a bug that "buf" is not advanced accordingly. Fix it to simply ignore the return value, hence the memory hole. Signed-off-by: Wu Fengguang Cc: Andi Kleen Cc: Benjamin Herrenschmidt Cc: Christoph Lameter Cc: Ingo Molnar Cc: Tejun Heo Cc: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 1fd4b11..48788db 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -555,7 +555,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, err = -EFAULT; break; } - sz = vwrite(kbuf, (char *)p, sz); + vwrite(kbuf, (char *)p, sz); count -= sz; buf += sz; virtr += sz; -- cgit v0.10.2 From 99cf611613f8826f52c156810bfb9e34c71d193a Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 2 Feb 2010 13:44:07 -0800 Subject: get_maintainer.pl: teach git log to use --no-color When git has been set to always use color in .gitconfig then I get the warning message Bad divisor in main::vcs_assign: 0 This is caused by vcs_file_signoffs not matching any commits due to the pattern not understand the colour codes. Fix this by telling git log to never use colour. Signed-off-by: Richard Kennedy Acked-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 090f248..2f3230d 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -74,8 +74,8 @@ my %VCS_cmds; my %VCS_cmds_git = ( "execute_cmd" => \&git_execute_cmd, "available" => '(which("git") ne "") && (-d ".git")', - "find_signers_cmd" => "git log --since=\$email_git_since -- \$file", - "find_commit_signers_cmd" => "git log -1 \$commit", + "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file", + "find_commit_signers_cmd" => "git log --no-color -1 \$commit", "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", -- cgit v0.10.2 From ef2b9b054580ef835078d8aa411bd06542cd5c1c Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Tue, 2 Feb 2010 13:44:09 -0800 Subject: markup_oops.pl: fix $func_offset error with x86_64 When I use markup_oops.pl parse a x8664 oops, I got: objdump: --start-address: bad number: NaN No matching code found This is because: main::(./m.pl:228): open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump"; DB<3> p $decodestart NaN This NaN is from: main::(./m.pl:176): my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); DB<2> p $func_offset 0x175 There is already a "0x" in $func_offset, another 0x makes it a NaN. The $func_offset is from line: if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)". Signed-off-by: Hui Zhu Cc: Arjan van de Ven Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index ce3e40b..e950f9c 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -158,7 +158,7 @@ while () { $function = $1; $func_offset = $2; } - if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { + if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } -- cgit v0.10.2 From 4528fd0595847c2078b59f24800e751c2d6b7e41 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: cgroups: fix to return errno in a failure path In cgroup_create(), if alloc_css_id() returns failure, the errno is not propagated to userspace, so mkdir will fail silently. To trigger this bug, we mount blkio (or memory subsystem), and create more then 65534 cgroups. (The number of cgroups is limited to 65535 if a subsystem has use_id == 1) # mount -t cgroup -o blkio xxx /mnt # for ((i = 0; i < 65534; i++)); do mkdir /mnt/$i; done # mkdir /mnt/65534 (should return ENOSPC) # Signed-off-by: Li Zefan Acked-by: Serge Hallyn Acked-by: Paul Menage Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 1fbcc74..aa3bee5 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2936,14 +2936,17 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry, for_each_subsys(root, ss) { struct cgroup_subsys_state *css = ss->create(ss, cgrp); + if (IS_ERR(css)) { err = PTR_ERR(css); goto err_destroy; } init_cgroup_css(css, ss, cgrp); - if (ss->use_id) - if (alloc_css_id(ss, parent, cgrp)) + if (ss->use_id) { + err = alloc_css_id(ss, parent, cgrp); + if (err) goto err_destroy; + } /* At error, ->destroy() callback has to free assigned ID. */ } -- cgit v0.10.2 From 1ec562035ba64e724652cb12b8a770b3906e9bf5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: imxfb: correct location of callbacks in suspend and resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe function passes a pointer to a struct fb_info to platform_set_drvdata(), so don't interpret the return value of platform_get_drvdata() as a pointer to struct imxfb_info. The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend it was 4 resulting in an oops as imxfb_suspend calls imxfb_disable_controller(fbi) which in turn has if (fbi->backlight_power) fbi->backlight_power(0); Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 66358fa..b4b6dece 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -593,7 +593,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf */ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); @@ -603,7 +604,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) static int imxfb_resume(struct platform_device *dev) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); -- cgit v0.10.2 From 03eac7bb882a75e6ee5705288f7ec36ad2e7d0d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 2 Feb 2010 13:44:12 -0800 Subject: uartlite: fix crash when using as console MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the ulite_console_setup to the .devinit section since it might be called on probe, which is in devinit. Fixes the crash below where the uartlite hw is probed after the .init section is freed from the kernel. uartlite: ttyUL0 at MMIO 0xc8000100 (irq = 30) is a uartlite BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] ulite_console_setup+0x6f/0xa8 *pdpt = 0000000036fb0001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host0/uevent Modules linked in: puffin(+) serio_raw Pid: 151, comm: modprobe Not tainted (2.6.31.5-1.0.b1-b1 #1) POULSBO EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at ulite_console_setup+0x6f/0xa8 EAX: c16ec824 EBX: c16ec824 ECX: c176719f EDX: 00000000 ESI: 00000000 EDI: c17b42c4 EBP: f6fd1cf0 ESP: f6fd1cd8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 151, ti=f6fd0000 task=f6fa1020 task.ti=f6fd0000) Stack: c1031f51 00000000 00000000 00000246 c182237c f7742000 f6fd1d5c c11fd316 <0> c16ec85c f77420d4 0000001e 00000000 00000000 c1633e78 4f494d4d 63783020 <0> 30303038 00303031 f6fd1d3c c10e0786 f6fd1d48 00000000 f6fd1d48 00000000 Call Trace: [] ? register_console+0xf6/0x1fc [] ? uart_add_one_port+0x237/0x2bb [] ? sysfs_add_one+0x13/0xd3 [] ? sysfs_do_create_link+0xba/0xfc [] ? ulite_probe+0x198/0x1eb [] ? platform_drv_probe+0xc/0xe [] ? driver_probe_device+0x79/0x105 [] ? __device_attach+0x28/0x30 [] ? bus_for_each_drv+0x3d/0x67 [] ? device_attach+0x44/0x58 [] ? __device_attach+0x0/0x30 [] ? bus_probe_device+0x1f/0x34 [] ? device_add+0x385/0x4c0 [] ? _write_unlock+0x8/0x1f [] ? platform_device_add+0xd9/0x11c [] ? mfd_add_devices+0x165/0x1bc [] ? puffin_probe+0x2d0/0x390 [puffin] [] ? pci_match_device+0xa0/0xa7 [] ? local_pci_probe+0xe/0x10 [] ? pci_device_probe+0x43/0x66 [] ? driver_probe_device+0x79/0x105 [] ? __driver_attach+0x43/0x5f [] ? bus_for_each_dev+0x3d/0x67 [] ? driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] ? bus_add_driver+0xf9/0x220 [] ? driver_register+0x8b/0xeb [] ? __pci_register_driver+0x43/0x9f [] ? __blocking_notifier_call_chain+0x40/0x4c [] ? puffin_init+0x0/0x48 [puffin] [] ? puffin_init+0x17/0x48 [puffin] [] ? do_one_initcall+0x4c/0x131 [] ? sys_init_module+0xa7/0x1b7 [] ? syscall_call+0x7/0xb Code: 6e 74 00 00 00 92 33 00 00 18 00 0e 01 73 79 6e 63 65 2d 72 65 67 69 73 74 72 79 0c 00 49 32 00 00 14 00 09 01 61 6c 73 61 2d 69 <6e> 66 6f 00 00 00 42 37 00 00 10 00 07 01 6b 69 6c 6c 61 6c 6c EIP: [] ulite_console_setup+0x6f/0xa8 SS:ESP 0068:f6fd1cd8 CR2: 0000000000000000 Signed-off-by: Richard Röjfors Acked-by: Peter Korsgaard Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 377f271..ab2ab3c 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -394,7 +394,7 @@ static void ulite_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&port->lock, flags); } -static int __init ulite_console_setup(struct console *co, char *options) +static int __devinit ulite_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; -- cgit v0.10.2 From 094e9539bd24bbe23b8e2741e903b0f3f1f85b03 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 2 Feb 2010 13:44:14 -0800 Subject: hugetlb: fix section mismatches hugetlb_sysfs_add_hstate is called by hugetlb_register_node directly during init and also indirectly via sysfs after init. This patch removes the __init tag from hugetlb_sysfs_add_hstate. Signed-off-by: Jeff Mahoney Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e91b81b..2d16fa6 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1515,10 +1515,9 @@ static struct attribute_group hstate_attr_group = { .attrs = hstate_attrs, }; -static int __init hugetlb_sysfs_add_hstate(struct hstate *h, - struct kobject *parent, - struct kobject **hstate_kobjs, - struct attribute_group *hstate_attr_group) +static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent, + struct kobject **hstate_kobjs, + struct attribute_group *hstate_attr_group) { int retval; int hi = h - hstates; -- cgit v0.10.2 From a225a5cc2c25e1217e68ee2ab8dd4454573fa308 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 2 Feb 2010 13:44:15 -0800 Subject: fault injection: correct function names in documentation init_fault_attr_entries() should be init_fault_attr_dentries(). cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries(). Signed-off-by: Anton Blanchard Acked-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index 0793056..7be15e4 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -143,8 +143,8 @@ o provide a way to configure fault attributes failslab, fail_page_alloc, and fail_make_request use this way. Helper functions: - init_fault_attr_entries(entries, attr, name); - void cleanup_fault_attr_entries(entries); + init_fault_attr_dentries(entries, attr, name); + void cleanup_fault_attr_dentries(entries); - module parameters -- cgit v0.10.2 From ea0854170c95245a258b386c7a9314399c949fe0 Mon Sep 17 00:00:00 2001 From: Shaohui Zheng Date: Tue, 2 Feb 2010 13:44:16 -0800 Subject: memory hotplug: fix a bug on /dev/mem for 64-bit kernels Newly added memory can not be accessed via /dev/mem, because we do not update the variables high_memory, max_pfn and max_low_pfn. Add a function update_end_of_memory_vars() to update these variables for 64-bit kernels. [akpm@linux-foundation.org: simplify comment] Signed-off-by: Shaohui Zheng Cc: Andi Kleen Cc: Li Haicheng Reviewed-by: Wu Fengguang Reviewed-by: KAMEZAWA Hiroyuki Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5198b9b..69ddfbd 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -49,6 +49,7 @@ #include #include #include +#include static unsigned long dma_reserve __initdata; @@ -616,6 +617,21 @@ void __init paging_init(void) */ #ifdef CONFIG_MEMORY_HOTPLUG /* + * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need + * updating. + */ +static void update_end_of_memory_vars(u64 start, u64 size) +{ + unsigned long end_pfn = PFN_UP(start + size); + + if (end_pfn > max_pfn) { + max_pfn = end_pfn; + max_low_pfn = end_pfn; + high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; + } +} + +/* * Memory is added always to NORMAL zone. This means you will never get * additional DMA/DMA32 memory. */ @@ -634,6 +650,9 @@ int arch_add_memory(int nid, u64 start, u64 size) ret = __add_pages(nid, zone, start_pfn, nr_pages); WARN_ON_ONCE(ret); + /* update max_pfn, max_low_pfn and high_memory */ + update_end_of_memory_vars(start, size); + return ret; } EXPORT_SYMBOL_GPL(arch_add_memory); -- cgit v0.10.2 From ca0bf64d99f6e3f6e2fe2585e52a0ac57354beac Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 2 Feb 2010 13:44:17 -0800 Subject: pktcdvd: removing device does not remove its sysfs dir This is the counterpart to cba767175becadc5c4016cceb7bfdd2c7fe722f4 ("pktcdvd: remove broken dev_t export of class devices"). Device is not registered using dev_t, so it should not be destroyed using device_destroy which looks up the device by dev_t. This will fail and adding the device again will fail with the "duplicate name" error. This is fixed using device_unregister instead of device_destroy. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Kay Sievers Cc: Peter Osterlund Cc: Al Viro Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 2ddf03a..68b5957 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -322,7 +322,7 @@ static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd) pkt_kobj_remove(pd->kobj_stat); pkt_kobj_remove(pd->kobj_wqueue); if (class_pktcdvd) - device_destroy(class_pktcdvd, pd->pkt_dev); + device_unregister(pd->dev); } -- cgit v0.10.2 From d622b89a2f58613a9c1407b22b02aecdd2187a7c Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Sat, 30 Jan 2010 23:32:19 +0800 Subject: ocfs2: Fix memory overflow in cow_by_page. In ocfs2_duplicate_clusters_by_page, we calculate map_end by shifting page_index. But actually in case we meet with a large offset(say in a i686 box, poff_t is only 32 bits and page_index=2056240), we will overflow. So change the type of page_index to loff_t. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 74db2be..5b64468 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -2945,7 +2945,7 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle, while (offset < end) { page_index = offset >> PAGE_CACHE_SHIFT; - map_end = (page_index + 1) << PAGE_CACHE_SHIFT; + map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT; if (map_end > end) map_end = end; @@ -3170,7 +3170,7 @@ static int ocfs2_cow_sync_writeback(struct super_block *sb, while (offset < end) { page_index = offset >> PAGE_CACHE_SHIFT; - map_end = (page_index + 1) << PAGE_CACHE_SHIFT; + map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT; if (map_end > end) map_end = end; -- cgit v0.10.2 From 0a1ea437d87af830786605813972e8e277992917 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 1 Feb 2010 17:05:33 +0800 Subject: ocfs2: Only bug out when page size is larger than cluster size. In CoW, we have to make sure that the page is already written out to the disk. So we have a BUG_ON(PageDirty(page)). In ppc platform we have pagesize=64K, so if the cs=4K, if the file have fragmented clusters, we will map the page many times. See this file as an example. Tree Depth: 0 Count: 19 Next Free Rec: 14 ## Offset Clusters Block# Flags 0 0 4 2164864 0x2 Refcounted 1 4 2 9302792 0x2 Refcounted ... We have to replace the extent recs one by one, so the page with index 0 will be mapped and dirtied twice. I'd like to leave the BUG_ON there while adding a check so that in case we meet with an error in other platforms, we can find it easily. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 5b64468..8ae65c9 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -2957,8 +2957,12 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle, page = grab_cache_page(mapping, page_index); - /* This page can't be dirtied before we CoW it out. */ - BUG_ON(PageDirty(page)); + /* + * In case PAGE_CACHE_SIZE <= CLUSTER_SIZE, This page + * can't be dirtied before we CoW it out. + */ + if (PAGE_CACHE_SIZE <= OCFS2_SB(sb)->s_clustersize) + BUG_ON(PageDirty(page)); if (!PageUptodate(page)) { ret = block_read_full_page(page, ocfs2_get_block); -- cgit v0.10.2 From 60c486744c9a30ea60fa863e9587242dde2fe4bd Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 3 Feb 2010 09:56:04 +0800 Subject: ocfs2: Add parenthesis to wrap the check for O_DIRECT. Add parenthesis to wrap the check for O_DIRECT. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 65e9375..558ce03 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2013,8 +2013,8 @@ out_dio: /* buffered aio wouldn't have proper lock coverage today */ BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); - if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode) || - (file->f_flags & O_DIRECT && has_refcount)) { + if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) || + ((file->f_flags & O_DIRECT) && has_refcount)) { ret = filemap_fdatawrite_range(file->f_mapping, pos, pos + count - 1); if (ret < 0) -- cgit v0.10.2 From cd34edd8cf80b507bb84b3f0c2988fe05099ffb5 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 25 Jan 2010 17:58:30 -0800 Subject: ocfs2/dlm: Handle EAGAIN for compatibility - v2 Mainline commit aad1b15310b9bcd59fa81ab8f2b1513b59553ea8 made the dlm_begin_reco_handler() return -EAGAIN instead of EAGAIN. As this error is transmitted over the wire, we want the receiver, dlm_send_begin_reco_message(), to understand both the older EAGAIN and the newer -EAGAIN, to allow rolling upgrade of the cluster nodes. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index cfb2ae9..ad71221 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2639,7 +2639,13 @@ retry: "begin reco msg (%d)\n", dlm->name, nodenum, ret); ret = 0; } - if (ret == -EAGAIN) { + + /* + * Prior to commit aad1b15310b9bcd59fa81ab8f2b1513b59553ea8, + * dlm_begin_reco_handler() returned EAGAIN and not -EAGAIN. + * We are handling both for compatibility reasons. + */ + if (ret == -EAGAIN || ret == EAGAIN) { mlog(0, "%s: trying to start recovery of node " "%u, but node %u is waiting for last recovery " "to complete, backoff for a bit\n", dlm->name, -- cgit v0.10.2 From 34e6c59af06cbca07b1490ec0015ea2d303470d3 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 27 Jan 2010 10:21:52 +0800 Subject: ocfs2: Use compat_ptr in reflink_arguments. Although we use u64 to pass userspace pointers to the kernel to avoid compat_ioctl, it doesn't work in some ppc platform. So wrap them with compat_ptr and add compat_ioctl. The detailed discussion about compat_ptr can be found in thread http://lkml.org/lkml/2009/10/27/423. We indeed met with a bug when testing on ppc(-EFAULT is returned when using old_path). This patch try to fix this. I have tested in ppc64(with 32 bit reflink) and x86_64(with i686 reflink), both works. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 31fbb06..7d9d9c1 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -7,6 +7,7 @@ #include #include +#include #define MLOG_MASK_PREFIX ML_INODE #include @@ -181,6 +182,10 @@ long ocfs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) #ifdef CONFIG_COMPAT long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) { + bool preserve; + struct reflink_arguments args; + struct inode *inode = file->f_path.dentry->d_inode; + switch (cmd) { case OCFS2_IOC32_GETFLAGS: cmd = OCFS2_IOC_GETFLAGS; @@ -195,8 +200,15 @@ long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) case OCFS2_IOC_GROUP_EXTEND: case OCFS2_IOC_GROUP_ADD: case OCFS2_IOC_GROUP_ADD64: - case OCFS2_IOC_REFLINK: break; + case OCFS2_IOC_REFLINK: + if (copy_from_user(&args, (struct reflink_arguments *)arg, + sizeof(args))) + return -EFAULT; + preserve = (args.preserve != 0); + + return ocfs2_reflink_ioctl(inode, compat_ptr(args.old_path), + compat_ptr(args.new_path), preserve); default: return -ENOIOCTLCMD; } -- cgit v0.10.2 From 7e55a70c5b9a57c12f49c44b0847c9343d4f54e4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 13 Jan 2010 13:33:12 -0700 Subject: ioat: fix infinite timeout checking in ioat2_quiesce Fix typo in ioat2_quiesce. check 'tmo' is zero, not 'end'. Also applies to 2.6.32.3 Cc: Signed-off-by: Dan Williams diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 5f7a500..5cc37af 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -249,7 +249,7 @@ int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo) if (is_ioat_active(status) || is_ioat_idle(status)) ioat_suspend(chan); while (is_ioat_active(status) || is_ioat_idle(status)) { - if (end && time_after(jiffies, end)) { + if (tmo && time_after(jiffies, end)) { err = -ETIMEDOUT; break; } -- cgit v0.10.2 From 0b94a909eb2e2f6990d05fd486a0cb4902ef1ae7 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Thu, 21 Jan 2010 10:50:02 -0800 Subject: ocfs2: Fix setting of OCFS2_LOCK_BLOCKED during bast During bast, set the OCFS2_LOCK_BLOCKED flag only if the lock needs to downconverted. Signed-off-by: Wengang Wang Acked-by: Sunil Mushran Acked-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 172f4c6..0cdf630 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -907,8 +907,6 @@ static int ocfs2_generic_handle_bast(struct ocfs2_lock_res *lockres, assert_spin_locked(&lockres->l_lock); - lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED); - if (level > lockres->l_blocking) { /* only schedule a downconvert if we haven't already scheduled * one that goes low enough to satisfy the level we're @@ -921,6 +919,9 @@ static int ocfs2_generic_handle_bast(struct ocfs2_lock_res *lockres, lockres->l_blocking = level; } + if (needs_downconvert) + lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED); + mlog_exit(needs_downconvert); return needs_downconvert; } -- cgit v0.10.2 From a19128260107f951d1b4c421cf98b92f8092b069 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Thu, 21 Jan 2010 10:50:03 -0800 Subject: ocfs2: Prevent a livelock in dlmglue There is possibility of a livelock in __ocfs2_cluster_lock(). If a node were to get an ast for an upconvert request, followed immediately by a bast, there is a small window where the fs may downconvert the lock before the process requesting the upconvert is able to take the lock. This patch adds a new flag to indicate that the upconvert is still in progress and that the dc thread should not downconvert it right now. Wengang Wang and Joel Becker contributed heavily to this patch. Reported-by: David Teigland Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 0cdf630..85d7c49 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -875,6 +875,14 @@ static inline void ocfs2_generic_handle_convert_action(struct ocfs2_lock_res *lo lockres_or_flags(lockres, OCFS2_LOCK_NEEDS_REFRESH); lockres->l_level = lockres->l_requested; + + /* + * We set the OCFS2_LOCK_UPCONVERT_FINISHING flag before clearing + * the OCFS2_LOCK_BUSY flag to prevent the dc thread from + * downconverting the lock before the upconvert has fully completed. + */ + lockres_or_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING); + lockres_clear_flags(lockres, OCFS2_LOCK_BUSY); mlog_exit_void(); @@ -1134,6 +1142,7 @@ static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres, mlog_entry_void(); spin_lock_irqsave(&lockres->l_lock, flags); lockres_clear_flags(lockres, OCFS2_LOCK_BUSY); + lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING); if (convert) lockres->l_action = OCFS2_AST_INVALID; else @@ -1324,13 +1333,13 @@ static int __ocfs2_cluster_lock(struct ocfs2_super *osb, again: wait = 0; + spin_lock_irqsave(&lockres->l_lock, flags); + if (catch_signals && signal_pending(current)) { ret = -ERESTARTSYS; - goto out; + goto unlock; } - spin_lock_irqsave(&lockres->l_lock, flags); - mlog_bug_on_msg(lockres->l_flags & OCFS2_LOCK_FREEING, "Cluster lock called on freeing lockres %s! flags " "0x%lx\n", lockres->l_name, lockres->l_flags); @@ -1347,6 +1356,25 @@ again: goto unlock; } + if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING) { + /* + * We've upconverted. If the lock now has a level we can + * work with, we take it. If, however, the lock is not at the + * required level, we go thru the full cycle. One way this could + * happen is if a process requesting an upconvert to PR is + * closely followed by another requesting upconvert to an EX. + * If the process requesting EX lands here, we want it to + * continue attempting to upconvert and let the process + * requesting PR take the lock. + * If multiple processes request upconvert to PR, the first one + * here will take the lock. The others will have to go thru the + * OCFS2_LOCK_BLOCKED check to ensure that there is no pending + * downconvert request. + */ + if (level <= lockres->l_level) + goto update_holders; + } + if (lockres->l_flags & OCFS2_LOCK_BLOCKED && !ocfs2_may_continue_on_blocked_lock(lockres, level)) { /* is the lock is currently blocked on behalf of @@ -1417,11 +1445,14 @@ again: goto again; } +update_holders: /* Ok, if we get here then we're good to go. */ ocfs2_inc_holders(lockres, level); ret = 0; unlock: + lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING); + spin_unlock_irqrestore(&lockres->l_lock, flags); out: /* @@ -3402,6 +3433,18 @@ recheck: goto leave; } + /* + * This prevents livelocks. OCFS2_LOCK_UPCONVERT_FINISHING flag is + * set when the ast is received for an upconvert just before the + * OCFS2_LOCK_BUSY flag is cleared. Now if the fs received a bast + * on the heels of the ast, we want to delay the downconvert just + * enough to allow the up requestor to do its task. Because this + * lock is in the blocked queue, the lock will be downconverted + * as soon as the requestor is done with the lock. + */ + if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING) + goto leave_requeue; + /* if we're blocking an exclusive and we have *any* holders, * then requeue. */ if ((lockres->l_blocking == DLM_LOCK_EX) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 9362eea..740f448 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -136,6 +136,10 @@ enum ocfs2_unlock_action { #define OCFS2_LOCK_PENDING (0x00000400) /* This lockres is pending a call to dlm_lock. Only exists with BUSY set. */ +#define OCFS2_LOCK_UPCONVERT_FINISHING (0x00000800) /* blocks the dc thread + * from downconverting + * before the upconvert + * has completed */ struct ocfs2_lock_res_ops; -- cgit v0.10.2 From 0d74125a6a68d4f1969ecaf0b3543f315916ccdc Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Fri, 29 Jan 2010 09:44:11 -0800 Subject: ocfs2: Do not downconvert if the lock level is already compatible During upconvert, if the master were to send a BAST, dlmglue will detect the upconversion in process and send a cancel convert to the master. Upon receiving the AST for the cancel convert, it will re-process the lock resource to determine whether it needs downconverting. Say, the up was from PR to EX and the BAST was for EX. After the cancel convert, it will need to downconvert to NL. However, if the node was originally upconverting from NL to EX, then there would be no reason to downconvert (assuming the same message sequence). This patch makes dlmglue consider the possibility that the current lock level is already compatible and that downconverting is not required. Joel Becker assisted in fixing this issue. Fixes ossbz#1178 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1178 Reported-by: Coly Li Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 85d7c49..ac24f49 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3445,6 +3445,19 @@ recheck: if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING) goto leave_requeue; + /* + * How can we block and yet be at NL? We were trying to upconvert + * from NL and got canceled. The code comes back here, and now + * we notice and clear BLOCKING. + */ + if (lockres->l_level == DLM_LOCK_NL) { + BUG_ON(lockres->l_ex_holders || lockres->l_ro_holders); + lockres->l_blocking = DLM_LOCK_NL; + lockres_clear_flags(lockres, OCFS2_LOCK_BLOCKED); + spin_unlock_irqrestore(&lockres->l_lock, flags); + goto leave; + } + /* if we're blocking an exclusive and we have *any* holders, * then requeue. */ if ((lockres->l_blocking == DLM_LOCK_EX) -- cgit v0.10.2 From db0f6ce69776370232431eb8be85a5b18b0019c0 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 1 Feb 2010 16:55:50 -0800 Subject: ocfs2: Remove overzealous BUG_ON during blocked lock processing During blocked lock processing, we should consider the possibility that the lock is no longer blocking. Joel Becker assisted in fixing this issue. Reported-by: David Teigland Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index ac24f49..ce8e061 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3392,9 +3392,17 @@ static int ocfs2_unblock_lock(struct ocfs2_super *osb, spin_lock_irqsave(&lockres->l_lock, flags); - BUG_ON(!(lockres->l_flags & OCFS2_LOCK_BLOCKED)); - recheck: + /* + * Is it still blocking? If not, we have no more work to do. + */ + if (!(lockres->l_flags & OCFS2_LOCK_BLOCKED)) { + BUG_ON(lockres->l_blocking != DLM_LOCK_NL); + spin_unlock_irqrestore(&lockres->l_lock, flags); + ret = 0; + goto leave; + } + if (lockres->l_flags & OCFS2_LOCK_BUSY) { /* XXX * This is a *big* race. The OCFS2_LOCK_PENDING flag -- cgit v0.10.2 From 7823860ca2904d6325eb636b77768f3e8183c861 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 3 Feb 2010 10:18:20 +0100 Subject: microblaze: Defconfig update There were several changes in Microblaze defconfig that's why is good to update defconfigs. Signed-off-by: Michal Simek diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bb7c374..6fced1f 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:28:50 2009 +# Linux kernel version: 2.6.33-rc6 +# Wed Feb 3 10:02:59 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,12 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_PCI is not set CONFIG_NO_DMA=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -44,6 +48,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -64,10 +69,12 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_INITRAMFS_COMPRESSION_NONE is not set CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -90,21 +97,20 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 @@ -123,14 +129,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -139,11 +172,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y CONFIG_OPT_LIB_FUNCTION=y CONFIG_OPT_LIB_ASM=y -CONFIG_ALLOW_EDIT_AUTO=y - -# -# Automatic platform settings from Kconfig.auto -# # # Definitions for MICROBLAZE0 @@ -203,12 +231,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # @@ -289,7 +316,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -313,6 +346,10 @@ CONFIG_OF_DEVICE=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -349,7 +386,6 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -359,12 +395,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_XILINX_EMACLITE=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -408,6 +444,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -433,7 +470,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -526,8 +562,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -638,11 +672,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -662,6 +698,9 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -680,10 +719,29 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set -# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set CONFIG_DEBUG_BOOTMEM=y @@ -694,7 +752,11 @@ CONFIG_DEBUG_BOOTMEM=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index adb839b..ce2da53 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:29:43 2009 +# Linux kernel version: 2.6.33-rc6 +# Wed Feb 3 10:03:21 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,12 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_PCI is not set CONFIG_NO_DMA=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -46,6 +50,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -81,16 +86,16 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling @@ -116,14 +121,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -132,7 +164,10 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y # CONFIG_SELFMOD is not set # CONFIG_OPT_LIB_FUNCTION is not set -# CONFIG_ALLOW_EDIT_AUTO is not set + +# +# Definitions for MICROBLAZE0 +# CONFIG_KERNEL_BASE_ADDR=0x90000000 CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5" CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 @@ -190,7 +225,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -274,9 +308,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -301,9 +332,9 @@ CONFIG_STANDALONE=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -387,6 +418,10 @@ CONFIG_OF_DEVICE=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -423,7 +458,6 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -433,12 +467,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -482,6 +516,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -508,7 +543,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -616,7 +650,6 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -672,11 +705,13 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -695,12 +730,16 @@ CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y +# CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -720,8 +759,28 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y @@ -734,7 +793,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # -- cgit v0.10.2 From e402746a945ceb9d0486a8e3d5917c9228fa4404 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 25 Jan 2010 11:20:19 +0000 Subject: GFS2: Wait for unlock completion on umount This patch adds a wait on umount between the point at which we dispose of all glocks and the point at which we unmount the lock protocol. This ensures that we've received all the replies to our unlock requests before we stop the locking. Signed-off-by: Steven Whitehouse Reported-by: Fabio M. Di Nitto diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 4792200..bc0ad15 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -544,6 +544,8 @@ struct gfs2_sbd { struct gfs2_holder sd_live_gh; struct gfs2_glock *sd_rename_gl; struct gfs2_glock *sd_trans_gl; + wait_queue_head_t sd_glock_wait; + atomic_t sd_glock_disposal; /* Inode Stuff */ diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index 46df988..cdd0755 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -21,6 +21,7 @@ static void gdlm_ast(void *arg) { struct gfs2_glock *gl = arg; unsigned ret = gl->gl_state; + struct gfs2_sbd *sdp = gl->gl_sbd; BUG_ON(gl->gl_lksb.sb_flags & DLM_SBF_DEMOTED); @@ -30,6 +31,8 @@ static void gdlm_ast(void *arg) switch (gl->gl_lksb.sb_status) { case -DLM_EUNLOCK: /* Unlocked, so glock can be freed */ kmem_cache_free(gfs2_glock_cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); return; case -DLM_ECANCEL: /* Cancel while getting lock */ ret |= LM_OUT_CANCELED; @@ -167,7 +170,8 @@ static unsigned int gdlm_lock(struct gfs2_glock *gl, static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) { struct gfs2_glock *gl = ptr; - struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct; + struct gfs2_sbd *sdp = gl->gl_sbd; + struct lm_lockstruct *ls = &sdp->sd_lockstruct; int error; if (gl->gl_lksb.sb_lkid == 0) { @@ -183,6 +187,7 @@ static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) (unsigned long long)gl->gl_name.ln_number, error); return; } + atomic_inc(&sdp->sd_glock_disposal); } static void gdlm_cancel(struct gfs2_glock *gl) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index edfee24..9390fc7 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -82,6 +82,8 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb) gfs2_tune_init(&sdp->sd_tune); + init_waitqueue_head(&sdp->sd_glock_wait); + atomic_set(&sdp->sd_glock_disposal, 0); spin_lock_init(&sdp->sd_statfs_spin); spin_lock_init(&sdp->sd_rindex_spin); diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index c282ad4..66242b3 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "gfs2.h" #include "incore.h" @@ -860,6 +861,8 @@ restart: gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ gfs2_gl_hash_clear(sdp); + /* Wait for dlm to reply to all our unlock requests */ + wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); -- cgit v0.10.2 From 8f05228ee7c8f409ae3c6f9c3e13d7ccb9c18360 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:21:27 +0000 Subject: GFS2: Extend umount wait coverage to full glock lifetime Although all glocks are, by the time of the umount glock wait, scheduled for demotion, some of them haven't made it far enough through the process for the original set of waiting code to wait for them. This extends the ref count to the whole glock lifetime in order to ensure that the waiting does catch all glocks. It does make it a bit more invasive, but it seems the only sensible solution at the moment. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index f455a03..f426633 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -769,6 +769,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, if (!gl) return -ENOMEM; + atomic_inc(&sdp->sd_glock_disposal); gl->gl_flags = 0; gl->gl_name = name; atomic_set(&gl->gl_ref, 1); @@ -1538,6 +1539,9 @@ void gfs2_gl_hash_clear(struct gfs2_sbd *sdp) up_write(&gfs2_umount_flush_sem); msleep(10); } + flush_workqueue(glock_workqueue); + wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); + gfs2_dump_lockstate(sdp); } void gfs2_glock_finish_truncate(struct gfs2_inode *ip) diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index 13f0bd2..c0262fa 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -123,7 +123,7 @@ struct lm_lockops { int (*lm_mount) (struct gfs2_sbd *sdp, const char *fsname); void (*lm_unmount) (struct gfs2_sbd *sdp); void (*lm_withdraw) (struct gfs2_sbd *sdp); - void (*lm_put_lock) (struct kmem_cache *cachep, void *gl); + void (*lm_put_lock) (struct kmem_cache *cachep, struct gfs2_glock *gl); unsigned int (*lm_lock) (struct gfs2_glock *gl, unsigned int req_state, unsigned int flags); void (*lm_cancel) (struct gfs2_glock *gl); diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index cdd0755..0e5e0e7 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -167,15 +167,16 @@ static unsigned int gdlm_lock(struct gfs2_glock *gl, return LM_OUT_ASYNC; } -static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) +static void gdlm_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl) { - struct gfs2_glock *gl = ptr; struct gfs2_sbd *sdp = gl->gl_sbd; struct lm_lockstruct *ls = &sdp->sd_lockstruct; int error; if (gl->gl_lksb.sb_lkid == 0) { kmem_cache_free(cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); return; } @@ -187,7 +188,6 @@ static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) (unsigned long long)gl->gl_name.ln_number, error); return; } - atomic_inc(&sdp->sd_glock_disposal); } static void gdlm_cancel(struct gfs2_glock *gl) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 9390fc7..8a102f7 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -985,9 +985,17 @@ static const match_table_t nolock_tokens = { { Opt_err, NULL }, }; +static void nolock_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl) +{ + struct gfs2_sbd *sdp = gl->gl_sbd; + kmem_cache_free(cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); +} + static const struct lm_lockops nolock_ops = { .lm_proto_name = "lock_nolock", - .lm_put_lock = kmem_cache_free, + .lm_put_lock = nolock_put_lock, .lm_tokens = &nolock_tokens, }; diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 66242b3..b9dd3da 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -861,8 +861,6 @@ restart: gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ gfs2_gl_hash_clear(sdp); - /* Wait for dlm to reply to all our unlock requests */ - wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); -- cgit v0.10.2 From 58424a49cb99c4ad9386b47f885b352476313a02 Mon Sep 17 00:00:00 2001 From: "Steven J. Magnani" Date: Mon, 1 Feb 2010 06:34:45 -0600 Subject: microblaze: fix interrupt state restore Interrupts must be disabled while an interrupt state restore (prep for interrupt return) is in progress. Code to do this was lost in the port to the mainline kernel. Signed-off-by: Steven J. Magnani Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 95b0855..391d619 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -122,7 +122,7 @@ ENTRY(_interrupt) ret_from_intr: lwi r11, r1, PT_MODE - bneid r11, 3f + bneid r11, no_intr_resched lwi r6, r31, TS_THREAD_INFO /* get thread info */ lwi r19, r6, TI_FLAGS /* get flags in thread info */ @@ -133,16 +133,18 @@ ret_from_intr: bralid r15, schedule nop 1: andi r11, r19, _TIF_SIGPENDING - beqid r11, no_intr_reshed + beqid r11, no_intr_resched addk r5, r1, r0 addk r7, r0, r0 bralid r15, do_signal addk r6, r0, r0 -no_intr_reshed: +no_intr_resched: + /* Disable interrupts, we are now committed to the state restore */ + disable_irq + /* save mode indicator */ lwi r11, r1, PT_MODE -3: swi r11, r0, PER_CPU(KM) /* save r31 */ -- cgit v0.10.2 From 9f557cd8073104b39528794d44e129331ded649f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:22 -0500 Subject: NFS: Fix an Oops when truncating a file The VM/VFS does not allow mapping->a_ops->invalidatepage() to fail. Unfortunately, nfs_wb_page_cancel() may fail if a fatal signal occurs. Since the NFS code assumes that the page stays mapped for as long as the writeback is active, we can end up Oopsing (among other things). The only safe fix here is to convert nfs_wait_on_request(), so as to make it uninterruptible (as is already the case with wait_on_page_writeback()). Signed-off-by: Trond Myklebust Cc: stable@kernel.org diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index e297593..a12c45b 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -176,6 +176,12 @@ void nfs_release_request(struct nfs_page *req) kref_put(&req->wb_kref, nfs_free_request); } +static int nfs_wait_bit_uninterruptible(void *word) +{ + io_schedule(); + return 0; +} + /** * nfs_wait_on_request - Wait for a request to complete. * @req: request to wait upon. @@ -186,14 +192,9 @@ void nfs_release_request(struct nfs_page *req) int nfs_wait_on_request(struct nfs_page *req) { - int ret = 0; - - if (!test_bit(PG_BUSY, &req->wb_flags)) - goto out; - ret = out_of_line_wait_on_bit(&req->wb_flags, PG_BUSY, - nfs_wait_bit_killable, TASK_KILLABLE); -out: - return ret; + return wait_on_bit(&req->wb_flags, PG_BUSY, + nfs_wait_bit_uninterruptible, + TASK_UNINTERRUPTIBLE); } /** -- cgit v0.10.2 From 387c149b54b4321cbc790dadbd4f8eedb5a90468 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:35 -0500 Subject: NFS: Fix a umount race Ensure that we unregister the bdi before kill_anon_super() calls ida_remove() on our device name. Signed-off-by: Trond Myklebust Cc: stable@kernel.org diff --git a/fs/nfs/super.c b/fs/nfs/super.c index ce907ef..f1afee4 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -243,6 +243,7 @@ static int nfs_show_stats(struct seq_file *, struct vfsmount *); static int nfs_get_sb(struct file_system_type *, int, const char *, void *, struct vfsmount *); static int nfs_xdev_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt); +static void nfs_put_super(struct super_block *); static void nfs_kill_super(struct super_block *); static int nfs_remount(struct super_block *sb, int *flags, char *raw_data); @@ -266,6 +267,7 @@ static const struct super_operations nfs_sops = { .alloc_inode = nfs_alloc_inode, .destroy_inode = nfs_destroy_inode, .write_inode = nfs_write_inode, + .put_super = nfs_put_super, .statfs = nfs_statfs, .clear_inode = nfs_clear_inode, .umount_begin = nfs_umount_begin, @@ -335,6 +337,7 @@ static const struct super_operations nfs4_sops = { .alloc_inode = nfs_alloc_inode, .destroy_inode = nfs_destroy_inode, .write_inode = nfs_write_inode, + .put_super = nfs_put_super, .statfs = nfs_statfs, .clear_inode = nfs4_clear_inode, .umount_begin = nfs_umount_begin, @@ -2258,6 +2261,17 @@ error_splat_super: } /* + * Ensure that we unregister the bdi before kill_anon_super + * releases the device name + */ +static void nfs_put_super(struct super_block *s) +{ + struct nfs_server *server = NFS_SB(s); + + bdi_unregister(&server->backing_dev_info); +} + +/* * Destroy an NFS2/3 superblock */ static void nfs_kill_super(struct super_block *s) @@ -2265,7 +2279,6 @@ static void nfs_kill_super(struct super_block *s) struct nfs_server *server = NFS_SB(s); kill_anon_super(s); - bdi_unregister(&server->backing_dev_info); nfs_fscache_release_super_cookie(s); nfs_free_server(server); } -- cgit v0.10.2 From 9b4b351346b41d923d69adec865814fdaac4dba9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:35 -0500 Subject: NFS: Don't clobber the attribute type in nfs_update_inode() If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should not set the S_IFMT part of inode->i_mode. Reported-by: Al Viro Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index faa0918..f141bde 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1261,8 +1261,10 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) if (fattr->valid & NFS_ATTR_FATTR_MODE) { if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) { + umode_t newmode = inode->i_mode & S_IFMT; + newmode |= fattr->mode & S_IALLUGO; + inode->i_mode = newmode; invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL; - inode->i_mode = fattr->mode; } } else if (server->caps & NFS_CAP_MODE) invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR -- cgit v0.10.2 From 5ecb01cfdf96c5f465192bdb2a4fd4a61a24c6cc Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 23 Jan 2010 22:36:29 +0100 Subject: futex_lock_pi() key refcnt fix This fixes a futex key reference count bug in futex_lock_pi(), where a key's reference count is incremented twice but decremented only once, causing the backing object to not be released. If the futex is created in a temporary file in an ext3 file system, this bug causes the file's inode to become an "undead" orphan, which causes an oops from a BUG_ON() in ext3_put_super() when the file system is unmounted. glibc's test suite is known to trigger this, see . The bug is a regression from 2.6.28-git3, namely Peter Zijlstra's 38d47c1b7075bd7ec3881141bb3629da58f88dab "[PATCH] futex: rely on get_user_pages() for shared futexes". That commit made get_futex_key() also increment the reference count of the futex key, and updated its callers to decrement the key's reference count before returning. Unfortunately the normal exit path in futex_lock_pi() wasn't corrected: the reference count is incremented by get_futex_key() and queue_lock(), but the normal exit path only decrements once, via unqueue_me_pi(). The fix is to put_futex_key() after unqueue_me_pi(), since 2.6.31 this is easily done by 'goto out_put_key' rather than 'goto out'. Signed-off-by: Mikael Pettersson Acked-by: Peter Zijlstra Acked-by: Darren Hart Signed-off-by: Thomas Gleixner Cc: diff --git a/kernel/futex.c b/kernel/futex.c index d9b3a22..1782803 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1971,7 +1971,7 @@ retry_private: /* Unqueue and drop the lock */ unqueue_me_pi(&q); - goto out; + goto out_put_key; out_unlock_put_key: queue_unlock(&q, hb); -- cgit v0.10.2 From 51246bfd189064079c54421507236fd2723b18f3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 2 Feb 2010 11:40:27 +0100 Subject: futex: Handle user space corruption gracefully If the owner of a PI futex dies we fix up the pi_state and set pi_state->owner to NULL. When a malicious or just sloppy programmed user space application sets the futex value to 0 e.g. by calling pthread_mutex_init(), then the futex can be acquired again. A new waiter manages to enqueue itself on the pi_state w/o damage, but on unlock the kernel dereferences pi_state->owner and oopses. Prevent this by checking pi_state->owner in the unlock path. If pi_state->owner is not current we know that user space manipulated the futex value. Ignore the mess and return -EINVAL. This catches the above case and also the case where a task hijacks the futex by setting the tid value and then tries to unlock it. Reported-by: Jermome Marchand Signed-off-by: Thomas Gleixner Acked-by: Darren Hart Acked-by: Peter Zijlstra Cc: diff --git a/kernel/futex.c b/kernel/futex.c index 1782803..06e8240 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -758,6 +758,13 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this) if (!pi_state) return -EINVAL; + /* + * If current does not own the pi_state then the futex is + * inconsistent and user space fiddled with the futex value. + */ + if (pi_state->owner != current) + return -EINVAL; + raw_spin_lock(&pi_state->pi_mutex.wait_lock); new_owner = rt_mutex_next_owner(&pi_state->pi_mutex); -- cgit v0.10.2 From 59647b6ac3050dd964bc556fe6ef22f4db5b935c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Feb 2010 09:33:05 +0100 Subject: futex: Handle futex value corruption gracefully The WARN_ON in lookup_pi_state which complains about a mismatch between pi_state->owner->pid and the pid which we retrieved from the user space futex is completely bogus. The code just emits the warning and then continues despite the fact that it detected an inconsistent state of the futex. A conveniant way for user space to spam the syslog. Replace the WARN_ON by a consistency check. If the values do not match return -EINVAL and let user space deal with the mess it created. This also fixes the missing task_pid_vnr() when we compare the pi_state->owner pid with the futex value. Reported-by: Jermome Marchand Signed-off-by: Thomas Gleixner Acked-by: Darren Hart Acked-by: Peter Zijlstra Cc: diff --git a/kernel/futex.c b/kernel/futex.c index 06e8240..e7a35f1 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -530,8 +530,25 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb, return -EINVAL; WARN_ON(!atomic_read(&pi_state->refcount)); - WARN_ON(pid && pi_state->owner && - pi_state->owner->pid != pid); + + /* + * When pi_state->owner is NULL then the owner died + * and another waiter is on the fly. pi_state->owner + * is fixed up by the task which acquires + * pi_state->rt_mutex. + * + * We do not check for pid == 0 which can happen when + * the owner died and robust_list_exit() cleared the + * TID. + */ + if (pid && pi_state->owner) { + /* + * Bail out if user space manipulated the + * futex value. + */ + if (pid != task_pid_vnr(pi_state->owner)) + return -EINVAL; + } atomic_inc(&pi_state->refcount); *ps = pi_state; -- cgit v0.10.2 From 4aba098c8d64329f0c4b24d12e1dc5398dd41a75 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Feb 2010 15:48:03 +0000 Subject: ARM: Fix wrong register in proc-arm6_7.S data abort handler Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 3f9cd3d..795dc61 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area) ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r0] @ read arm instruction + ldr r8, [r2] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 -- cgit v0.10.2 From faccbcfb63af006e100d5b3b513131fe27aa66ab Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: omap: Remove old unused defines for OMAP_32KSYNCT_BASE Remove old unused defines for OMAP_32KSYNCT_BASE Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 1e5648d..2ed7201 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -89,16 +89,6 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -/* XXX this should be moved into a separate file */ -#if defined(CONFIG_ARCH_OMAP2420) -# define OMAP_32KSYNCT_BASE 0x48004000 -#elif defined(CONFIG_ARCH_OMAP2430) -# define OMAP_32KSYNCT_BASE 0x49020000 -#elif defined(CONFIG_ARCH_OMAP3430) -# define OMAP_32KSYNCT_BASE 0x48320000 -#else -# error Unknown OMAP device -#endif /* Private functions */ -- cgit v0.10.2 From 9af915da20bd405c232ebb93c3cb80c6d92a12f6 Mon Sep 17 00:00:00 2001 From: Sriram Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP OMAP platforms(like OMAP3530) include DSP or other co-processors for media acceleration. when carving out memory for the accelerators we can end up creating a hole in the memory map of sort: To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL has to be enabled. For further information refer discussion at: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html. Signed-off-by: Sriramakrishnan Signed-off-by: Tony Lindgren diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c33ca8..184a6bd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,7 @@ config ARCH_OMAP select ARCH_HAS_CPUFREQ select GENERIC_TIME select GENERIC_CLOCKEVENTS + select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1 and OMAP2). -- cgit v0.10.2 From 74005a2b116203f618fe784d88ad7e6071bb1554 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 29 Jan 2010 14:20:06 -0800 Subject: OMAP2/3: IRQ: ensure valid base address Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 2705402..26aeef5 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -194,7 +194,7 @@ void __init omap_init_irq(void) int i; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - unsigned long base; + unsigned long base = 0; struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) @@ -202,6 +202,8 @@ void __init omap_init_irq(void) else if (cpu_is_omap34xx()) base = OMAP34XX_IC_BASE; + BUG_ON(!base); + /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); if (!bank->base_reg) { -- cgit v0.10.2 From 8d08436d782d177747a0fac1e1455a44b932b7c6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 29 Jan 2010 14:20:06 -0800 Subject: OMAP2/3: GPMC: ensure valid clock pointer Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 3f1334f..7027cdc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void) void __init gpmc_init(void) { u32 l; - char *ck; + char *ck = NULL; if (cpu_is_omap24xx()) { ck = "core_l3_ck"; @@ -521,6 +521,9 @@ void __init gpmc_init(void) l = OMAP44XX_GPMC_BASE; } + if (WARN_ON(!ck)) + return; + gpmc_l3_clk = clk_get(NULL, ck); if (IS_ERR(gpmc_l3_clk)) { printk(KERN_ERR "Could not get GPMC clock %s\n", ck); -- cgit v0.10.2 From 9ecef433204f9b06550dd45cf84f14706f8fe4f0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 11:22:54 -0800 Subject: omap: Fix 3630 mux errors 3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais . Reported-by: Allen Pais Signed-off-by: Allen Pais Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 3f59bd1..19001dd 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -968,6 +968,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset) } #endif +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) + if (!superset->muxnames || !superset->muxnames[0]) { + superset++; + continue; + } +#endif + entry = omap_mux_list_add(superset); if (!entry) { printk(KERN_ERR "mux: Could not add entry\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 68e0a59..07aa7b3 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = { _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, "uart3_tx_irtx", NULL, NULL, NULL, "gpio_166", NULL, NULL, "safe_mode"), + + /* Only on 3630, see omap36xx_cbp_subset for the signals */ + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), { .reg_offset = OMAP_MUX_TERMINATOR }, }; -- cgit v0.10.2 From 78737ae1b0f0b425e8eb72a9c84125fa8cac8e8e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 13:03:42 -0800 Subject: omap: Fix arch/arm/mach-omap2/mux.c: Off by one error David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: David Binderman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 19001dd..5fedc50 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val) static inline void omap_mux_decode(struct seq_file *s, u16 val) { char *flags[OMAP_MUX_MAX_NR_FLAGS]; - char mode[14]; + char mode[sizeof("OMAP_MUX_MODE") + 1]; int i = -1; sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); @@ -553,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) if (!m0_name) continue; + /* REVISIT: Needs to be updated if mode0 names get longer */ for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { if (m0_name[i] == '\0') { m0_def[i] = m0_name[i]; -- cgit v0.10.2 From 0825cc8a6ffa54c87ad7ad914a16d6c035627935 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sun, 31 Jan 2010 10:00:54 +0000 Subject: omap: Fix access to already released memory in clk_debugfs_register_one() I have found an access to already released memory in clk_debugfs_register_one() function. Signed-off-by: Marek Skuczynski Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index d9f8c84..4becbdd 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -391,7 +391,7 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child; + struct dentry *d, *child, *child_tmp; struct clk *pa = c->parent; char s[255]; char *p = s; @@ -423,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c) err_out: d = c->dent; - list_for_each_entry(child, &d->d_subdirs, d_u.d_child) + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) debugfs_remove(child); debugfs_remove(c->dent); return err; -- cgit v0.10.2 From 301fe8eeee02c570c5bd30537aff9456f7f7955c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 12:34:31 -0800 Subject: omap: Disable serial port autoidle by default Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8c964be..e10a02d 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -36,7 +36,13 @@ #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ -#define DEFAULT_TIMEOUT (5 * HZ) +/* + * NOTE: By default the serial timeout is disabled as it causes lost characters + * over the serial ports. This means that the UART clocks will stay on until + * disabled via sysfs. This also causes that any deeper omap sleep states are + * blocked. + */ +#define DEFAULT_TIMEOUT 0 struct omap_uart_state { int num; @@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); - mod_timer(&uart->timer, jiffies + uart->timeout); + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); omap_uart_smart_idle_enable(uart, 0); if (cpu_is_omap34xx()) { -- cgit v0.10.2 From b9c3032277f756e73f6c673419dc414155e04e46 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 3 Feb 2010 18:08:52 +0100 Subject: hrtimer, softirq: Fix hrtimer->softirq trampoline hrtimers callbacks are always done from hardirq context, either the jiffy tick interrupt or the hrtimer device interrupt. [ there is currently one exception that can still call a hrtimer callback from softirq, but even in that case this will still work correctly. ] Reported-by: Wei Yongjun Signed-off-by: Peter Zijlstra Cc: Yury Polyanskiy Tested-by: Wei Yongjun Acked-by: David S. Miller LKML-Reference: <1265120401.24455.306.camel@laptop> Signed-off-by: Thomas Gleixner diff --git a/kernel/softirq.c b/kernel/softirq.c index a09502e..7c1a67e 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -500,22 +500,17 @@ EXPORT_SYMBOL(tasklet_kill); */ /* - * The trampoline is called when the hrtimer expires. If this is - * called from the hrtimer interrupt then we schedule the tasklet as - * the timer callback function expects to run in softirq context. If - * it's called in softirq context anyway (i.e. high resolution timers - * disabled) then the hrtimer callback is called right away. + * The trampoline is called when the hrtimer expires. It schedules a tasklet + * to run __tasklet_hrtimer_trampoline() which in turn will call the intended + * hrtimer callback, but from softirq context. */ static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer) { struct tasklet_hrtimer *ttimer = container_of(timer, struct tasklet_hrtimer, timer); - if (hrtimer_is_hres_active(timer)) { - tasklet_hi_schedule(&ttimer->tasklet); - return HRTIMER_NORESTART; - } - return ttimer->function(timer); + tasklet_hi_schedule(&ttimer->tasklet); + return HRTIMER_NORESTART; } /* -- cgit v0.10.2 From 1038a00b458997661bcd0e780a24dc280a8841fc Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Wed, 3 Feb 2010 11:42:26 -0800 Subject: Bluetooth: Fallback eSCO to SCO on error 0x1a (Unsupported Remote Feature) General Motors carkits that use LGE BT chipsets return this error code when an eSCO is attempted, despite advertising eSCO support. 2009-08-13 14:41:39.755518 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-08-13 14:41:39.757563 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-08-13 14:41:39.789484 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 257 bdaddr 00:1E:B2:23:5E:B3 type eSCO Error: Unsupported Remote Feature / Unsupported LMP Feature Signed-off-by: Jaikumar Ganesh Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 28517ba..592da5c 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1699,6 +1699,7 @@ static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_bu break; case 0x1c: /* SCO interval rejected */ + case 0x1a: /* Unsupported Remote Feature */ case 0x1f: /* Unspecified error */ if (conn->out && conn->attempt < 2) { conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | -- cgit v0.10.2 From b6c3f5be7c6ac3375f44de4545c1ffe216b34022 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 2 Feb 2010 10:08:19 -0600 Subject: b43: Fix throughput regression Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger Cc: Stable [Any stable version back through 2.6.28] Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fe3bf94..c484cc2 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -115,6 +115,7 @@ #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define B43_MMIO_RNG 0x65A +#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */ #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ #define B43_MMIO_IFSCTL_USE_EDCF 0x0004 #define B43_MMIO_POWERUP_DELAY 0x6A8 diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 19b4eae..fcbf0e2 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev) static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) { /* slot_time is in usec. */ - if (dev->phy.type != B43_PHYTYPE_G) + /* This test used to exit for all but a G PHY. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) return; - b43_write16(dev, 0x684, 510 + slot_time); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time); + /* Shared memory location 0x0010 is the slot time and should be + * set to slot_time; however, this register is initially 0 and changing + * the value adversely affects the transmit rate for BCM4311 + * devices. Until this behavior is unterstood, delete this step + * + * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + */ } static void b43_short_slot_timing_enable(struct b43_wldev *dev) -- cgit v0.10.2 From 391ae22ae5726d2a8cebfa62879635c54a349642 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 3 Feb 2010 18:24:35 +0100 Subject: ssb: Fix CONFIG_SSB_SDIOHOST typo This fixes a CONFIG_SSB_SDIOHOST typo. Signed-off-by: Michael Buesch Reported-by: Christoph Egger Tested-By: Albert Herranz Signed-off-by: John W. Linville diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 5681ebe..03dfd27 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -494,8 +494,7 @@ static int ssb_devices_register(struct ssb_bus *bus) #endif break; case SSB_BUSTYPE_SDIO: -#ifdef CONFIG_SSB_SDIO - sdev->irq = bus->host_sdio->dev.irq; +#ifdef CONFIG_SSB_SDIOHOST dev->parent = &bus->host_sdio->dev; #endif break; -- cgit v0.10.2 From 485f1eff73a7b932fd3abb0dfcf804e1a1f59025 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 3 Feb 2010 15:52:18 -0800 Subject: Bluetooth: Fix sleeping function in RFCOMM within invalid context With the commit 9e726b17422bade75fba94e625cd35fd1353e682 the rfcomm_session_put() gets accidentially called from a timeout callback and results in this: BUG: sleeping function called from invalid context at net/core/sock.c:1897 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper Pid: 0, comm: swapper Tainted: P 2.6.32 #31 Call Trace: [] __might_sleep+0xf8/0xfa [] lock_sock_nested+0x29/0xc4 [] lock_sock+0xb/0xd [l2cap] [] l2cap_sock_shutdown+0x1c/0x76 [l2cap] [] ? clockevents_program_event+0x75/0x7e [] ? tick_dev_program_event+0x37/0xa5 [] l2cap_sock_release+0x27/0x67 [l2cap] [] sock_release+0x1a/0x67 [] rfcomm_session_del+0x34/0x53 [rfcomm] [] rfcomm_session_put+0x14/0x16 [rfcomm] [] rfcomm_session_timeout+0xe/0x1a [rfcomm] [] run_timer_softirq+0x1e2/0x29a [] ? rfcomm_session_timeout+0x0/0x1a [rfcomm] [] __do_softirq+0xfe/0x1c5 [] ? timer_interrupt+0x1a/0x21 [] call_softirq+0x1c/0x28 [] do_softirq+0x33/0x6b [] irq_exit+0x36/0x85 [] do_IRQ+0xa6/0xbd [] ret_from_intr+0x0/0xa [] ? acpi_idle_enter_bm+0x269/0x294 [] ? acpi_idle_enter_bm+0x25f/0x294 [] ? cpuidle_idle_call+0x97/0x107 [] ? cpu_idle+0x53/0xaa [] ? rest_init+0x7a/0x7c [] ? start_kernel+0x389/0x394 [] ? x86_64_start_reservations+0xac/0xb0 [] ? x86_64_start_kernel+0xe4/0xeb To fix this, the rfcomm_session_put() needs to be moved out of rfcomm_session_timeout() into rfcomm_process_sessions(). In that context it is perfectly fine to sleep and disconnect the socket. Signed-off-by: Marcel Holtmann Tested-by: David John diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index fc5ee32..2b50637 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -252,7 +252,6 @@ static void rfcomm_session_timeout(unsigned long arg) BT_DBG("session %p state %ld", s, s->state); set_bit(RFCOMM_TIMED_OUT, &s->flags); - rfcomm_session_put(s); rfcomm_schedule(RFCOMM_SCHED_TIMEO); } @@ -1920,6 +1919,7 @@ static inline void rfcomm_process_sessions(void) if (test_and_clear_bit(RFCOMM_TIMED_OUT, &s->flags)) { s->state = BT_DISCONN; rfcomm_send_disc(s, 0); + rfcomm_session_put(s); continue; } -- cgit v0.10.2 From cd757645fbdc34a8343c04bb0e74e06fccc2cb10 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Sat, 30 Jan 2010 10:25:18 +0530 Subject: perf: Make bp_len type to u64 generic across the arch Change 'bp_len' type to __u64 to make it work across archs as the s390 architecture watch point length can be upto 2^64. reference: http://lkml.org/lkml/2010/1/25/212 This is an ABI change that is not backward compatible with the previous hardware breakpoint info layout integrated in this development cycle, a rebuilt of perf tools is necessary for versions based on 2.6.33-rc1 - 2.6.33-rc6 to work with a kernel based on this patch. Signed-off-by: Mahesh Salgaonkar Acked-by: Peter Zijlstra Cc: Ananth N Mavinakayanahalli Cc: "K. Prasad" Cc: Maneesh Soni Cc: Heiko Carstens Cc: Martin LKML-Reference: <20100130045518.GA20776@in.ibm.com> Signed-off-by: Frederic Weisbecker diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 070ba06..5977b72 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -44,7 +44,7 @@ static inline int hw_breakpoint_type(struct perf_event *bp) return bp->attr.bp_type; } -static inline int hw_breakpoint_len(struct perf_event *bp) +static inline unsigned long hw_breakpoint_len(struct perf_event *bp) { return bp->attr.bp_len; } diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 8fa7187..a177698 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -211,11 +211,9 @@ struct perf_event_attr { __u32 wakeup_watermark; /* bytes before wakeup */ }; - __u32 __reserved_2; - - __u64 bp_addr; __u32 bp_type; - __u32 bp_len; + __u64 bp_addr; + __u64 bp_len; }; /* diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index 8a5c7d5..967e6614 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -360,8 +360,8 @@ EXPORT_SYMBOL_GPL(register_user_hw_breakpoint); int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr) { u64 old_addr = bp->attr.bp_addr; + u64 old_len = bp->attr.bp_len; int old_type = bp->attr.bp_type; - int old_len = bp->attr.bp_len; int err = 0; perf_event_disable(bp); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index d27746b..2b19297 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -4580,7 +4580,7 @@ static int perf_copy_attr(struct perf_event_attr __user *uattr, if (attr->type >= PERF_TYPE_MAX) return -EINVAL; - if (attr->__reserved_1 || attr->__reserved_2) + if (attr->__reserved_1) return -EINVAL; if (attr->sample_type & ~(PERF_SAMPLE_MAX-1)) -- cgit v0.10.2 From 6c2718da59613d76013b501bf0f8bcf9d7794b2d Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Wed, 3 Feb 2010 16:18:36 -0800 Subject: Bluetooth: Do not call rfcomm_session_put() for RFCOMM UA on closed socket When processing a RFCOMM UA frame when the socket is closed and we were not the RFCOMM initiator would cause rfcomm_session_put() to be called twice during rfcomm_process_rx(). This would cause a kernel panic in rfcomm_session_close() then. This could be easily reproduced during disconnect with devices such as Motorola H270 that send RFCOMM UA followed quickly by L2CAP disconnect request. This trace for this looks like: 2009-09-21 17:22:37.788895 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 20 pf 1 ilen 0 fcs 0x7d 2009-09-21 17:22:37.906204 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:37.933090 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 20 pf 1 ilen 0 fcs 0x57 2009-09-21 17:22:38.636764 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c 2009-09-21 17:22:38.744125 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:38.763687 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6 2009-09-21 17:22:38.783554 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041 Avoid calling rfcomm_session_put() twice by skipping this call in rfcomm_recv_ua() if the socket is closed. Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 2b50637..89f4a59 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1150,7 +1150,11 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci) break; case BT_DISCONN: - rfcomm_session_put(s); + /* When socket is closed and we are not RFCOMM + * initiator rfcomm_process_rx already calls + * rfcomm_session_put() */ + if (s->sock->sk->sk_state != BT_CLOSED) + rfcomm_session_put(s); break; } } -- cgit v0.10.2 From 079b805782f94f4b278132286a8c9bc4655d1c51 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Wed, 3 Feb 2010 10:16:54 -0800 Subject: ocfs2: Plugs race between the dc thread and an unlock ast message This patch plugs a race between the downconvert thread and an unlock ast message. Specifically, after the downconvert worker has done its task, the dc thread needs to check whether an unlock ast made the downconvert moot. Reported-by: David Teigland Signed-off-by: Sunil Mushran Acked-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index ce8e061..e044019 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3384,6 +3384,7 @@ static int ocfs2_unblock_lock(struct ocfs2_super *osb, unsigned long flags; int blocking; int new_level; + int level; int ret = 0; int set_lvb = 0; unsigned int gen; @@ -3503,6 +3504,7 @@ recheck: * may sleep, so we save off a copy of what we're blocking as * it may change while we're not holding the spin lock. */ blocking = lockres->l_blocking; + level = lockres->l_level; spin_unlock_irqrestore(&lockres->l_lock, flags); ctl->unblock_action = lockres->l_ops->downconvert_worker(lockres, blocking); @@ -3511,7 +3513,7 @@ recheck: goto leave; spin_lock_irqsave(&lockres->l_lock, flags); - if (blocking != lockres->l_blocking) { + if ((blocking != lockres->l_blocking) || (level != lockres->l_level)) { /* If this changed underneath us, then we can't drop * it just yet. */ goto recheck; -- cgit v0.10.2 From cda70ba8c05a8661f882862c4699a31d215ab151 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 1 Feb 2010 17:34:58 -0800 Subject: ocfs2/dlm: Remove BUG_ON in dlm recovery when freeing locks of a dead node During recovery, the dlm frees the locks for the dead node. If it finds a lock in a resource for the dead node, it expects that node to also have a ref in that lock resource. If not, it BUGs. ossbz#1175 was filed with the above BUG. Now, while it is correct that we should be expecting the ref, I see no reason why we have to BUG. After all, we are freeing up the lock and clearing the ref. This patch replaces the BUG_ON with a printk(). Hopefully, that will give us more clues next time this happens. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1175 Signed-off-by: Sunil Mushran Acked-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index ad71221..344bcf9 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2243,7 +2243,12 @@ static void dlm_free_dead_locks(struct dlm_ctxt *dlm, mlog(0, "%s:%.*s: freed %u locks for dead node %u, " "dropping ref from lockres\n", dlm->name, res->lockname.len, res->lockname.name, freed, dead_node); - BUG_ON(!test_bit(dead_node, res->refmap)); + if(!test_bit(dead_node, res->refmap)) { + mlog(ML_ERROR, "%s:%.*s: freed %u locks for dead node %u, " + "but ref was not set\n", dlm->name, + res->lockname.len, res->lockname.name, freed, dead_node); + __dlm_print_one_lock_resource(res); + } dlm_lockres_clear_refmap_bit(dead_node, res); } else if (test_bit(dead_node, res->refmap)) { mlog(0, "%s:%.*s: dead node %u had a ref, but had " -- cgit v0.10.2 From 180211b841b5bf13ab10d19202adab3eb7749f6c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 30 Jan 2010 02:53:27 +0000 Subject: af_key: fix netns ops ordering on module load/unload 1. After sock_register() returns, it's possible to create sockets, even if module still not initialized fully (blame generic module code for that!) 2. Consequently, pfkey_create() can be called with pfkey_net_id still not initialized which will BUG_ON in net_generic(): kernel BUG at include/net/netns/generic.h:43! 3. During netns shutdown, netns ops should be unregistered after key manager unregistered because key manager calls can be triggered from xfrm_user module: general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC pfkey_broadcast+0x111/0x210 [af_key] pfkey_send_notify+0x16a/0x300 [af_key] km_state_notify+0x41/0x70 xfrm_flush_sa+0x75/0x90 [xfrm_user] 4. Unregister netns ops after socket ops just in case and for symmetry. Reported by Luca Tettamanti. Signed-off-by: Alexey Dobriyan Tested-by: Luca Tettamanti Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/key/af_key.c b/net/key/af_key.c index 76fa6fe..539f43b 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3794,9 +3794,9 @@ static struct pernet_operations pfkey_net_ops = { static void __exit ipsec_pfkey_exit(void) { - unregister_pernet_subsys(&pfkey_net_ops); xfrm_unregister_km(&pfkeyv2_mgr); sock_unregister(PF_KEY); + unregister_pernet_subsys(&pfkey_net_ops); proto_unregister(&key_proto); } @@ -3807,21 +3807,22 @@ static int __init ipsec_pfkey_init(void) if (err != 0) goto out; - err = sock_register(&pfkey_family_ops); + err = register_pernet_subsys(&pfkey_net_ops); if (err != 0) goto out_unregister_key_proto; + err = sock_register(&pfkey_family_ops); + if (err != 0) + goto out_unregister_pernet; err = xfrm_register_km(&pfkeyv2_mgr); if (err != 0) goto out_sock_unregister; - err = register_pernet_subsys(&pfkey_net_ops); - if (err != 0) - goto out_xfrm_unregister_km; out: return err; -out_xfrm_unregister_km: - xfrm_unregister_km(&pfkeyv2_mgr); + out_sock_unregister: sock_unregister(PF_KEY); +out_unregister_pernet: + unregister_pernet_subsys(&pfkey_net_ops); out_unregister_key_proto: proto_unregister(&key_proto); goto out; -- cgit v0.10.2 From 974c37e9d88c3e5a3e56eb98cb9c84232eb2bdcb Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 30 Jan 2010 10:05:05 +0000 Subject: netlink: fix for too early rmmod Netlink code does module autoload if protocol userspace is asking for is not ready. However, module can dissapear right after it was autoloaded. Example: modprobe/rmmod stress-testing and xfrm_user.ko providing NETLINK_XFRM. netlink_create() in such situation _will_ create userspace socket and _will_not_ pin module. Now if module was removed and we're going to call ->netlink_rcv into nothing: BUG: unable to handle kernel paging request at ffffffffa02f842a ^^^^^^^^^^^^^^^^ modules are loaded near these addresses here IP: [] 0xffffffffa02f842a PGD 161f067 PUD 1623063 PMD baa12067 PTE 0 Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent CPU 1 Pid: 11515, comm: ip Not tainted 2.6.33-rc5-netns-00594-gaaa5728-dirty #6 P5E/P5E RIP: 0010:[] [] 0xffffffffa02f842a RSP: 0018:ffff8800baa3db48 EFLAGS: 00010292 RAX: ffff8800baa3dfd8 RBX: ffff8800be353640 RCX: 0000000000000000 RDX: ffffffff81959380 RSI: ffff8800bab7f130 RDI: 0000000000000001 RBP: ffff8800baa3db58 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000011 R13: ffff8800be353640 R14: ffff8800bcdec240 R15: ffff8800bd488010 FS: 00007f93749656f0(0000) GS:ffff880002300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa02f842a CR3: 00000000ba82b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 11515, threadinfo ffff8800baa3c000, task ffff8800bab7eb30) Stack: ffffffff813637c0 ffff8800bd488000 ffff8800baa3dba8 ffffffff8136397d <0> 0000000000000000 ffffffff81344adc 7fffffffffffffff 0000000000000000 <0> ffff8800baa3ded8 ffff8800be353640 ffff8800bcdec240 0000000000000000 Call Trace: [] ? netlink_unicast+0x100/0x2d0 [] netlink_unicast+0x2bd/0x2d0 netlink_unicast_kernel: nlk->netlink_rcv(skb); [] ? memcpy_fromiovec+0x6c/0x90 [] netlink_sendmsg+0x1d3/0x2d0 [] sock_sendmsg+0xbb/0xf0 [] ? __lock_acquire+0x27b/0xa60 [] ? might_fault+0x73/0xd0 [] ? might_fault+0x73/0xd0 [] ? __lock_release+0x82/0x170 [] ? might_fault+0xbe/0xd0 [] ? might_fault+0x73/0xd0 [] ? verify_iovec+0x47/0xd0 [] sys_sendmsg+0x1a9/0x360 [] ? _raw_spin_unlock_irqrestore+0x65/0x70 [] ? trace_hardirqs_on+0xd/0x10 [] ? _raw_spin_unlock_irqrestore+0x42/0x70 [] ? __up_read+0x84/0xb0 [] ? trace_hardirqs_on_caller+0x145/0x190 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [] 0xffffffffa02f842a RSP CR2: ffffffffa02f842a If module was quickly removed after autoloading, return -E. Return -EPROTONOSUPPORT if module was quickly removed after autoloading. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index a4957bf..4c5972b 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -455,9 +455,14 @@ static int netlink_create(struct net *net, struct socket *sock, int protocol, if (nl_table[protocol].registered && try_module_get(nl_table[protocol].module)) module = nl_table[protocol].module; + else + err = -EPROTONOSUPPORT; cb_mutex = nl_table[protocol].cb_mutex; netlink_unlock_table(); + if (err < 0) + goto out; + err = __netlink_create(net, sock, cb_mutex, protocol); if (err < 0) goto out_module; -- cgit v0.10.2 From f6815077e75c5b7f55b56fc3788e328514d4e72a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 1 Feb 2010 13:41:47 +0000 Subject: sky2: fix transmit DMA map leakage The book keeping structure for transmit always had the flags value cleared so transmit DMA maps were never released correctly. Based on patch by Jarek Poplawski, problem observed by Michael Breuer. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d760650..67249c3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1025,11 +1025,8 @@ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot) { struct sky2_tx_le *le = sky2->tx_le + *slot; - struct tx_ring_info *re = sky2->tx_ring + *slot; *slot = RING_NEXT(*slot, sky2->tx_ring_size); - re->flags = 0; - re->skb = NULL; le->ctrl = 0; return le; } @@ -1622,8 +1619,7 @@ static unsigned tx_le_req(const struct sk_buff *skb) return count; } -static void sky2_tx_unmap(struct pci_dev *pdev, - const struct tx_ring_info *re) +static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) { if (re->flags & TX_MAP_SINGLE) pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), @@ -1633,6 +1629,7 @@ static void sky2_tx_unmap(struct pci_dev *pdev, pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + re->flags = 0; } /* @@ -1839,6 +1836,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; + re->skb = NULL; dev_kfree_skb_any(skb); sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); -- cgit v0.10.2 From 8ed030dd0aa400d18c63861c2c6deb7c38f4edde Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Mon, 1 Feb 2010 02:12:19 +0000 Subject: dccp: fix bug in cache allocation This fixes a bug introduced in commit de4ef86cfce60d2250111f34f8a084e769f23b16 ("dccp: fix dccp rmmod when kernel configured to use slub", 17 Jan): the vsnprintf used sizeof(slab_name_fmt), which became truncated to 4 bytes, since slab_name_fmt is now a 4-byte pointer and no longer a 32-character array. This lead to error messages such as FATAL: Error inserting dccp: No buffer space available >> kernel: [ 1456.341501] kmem_cache_create: duplicate cache cci generated due to the truncation after the 3rd character. Fixed for the moment by introducing a symbolic constant. Tested to fix the bug. Signed-off-by: Gerrit Renker Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index 57dfb9c..ff16e9d 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -83,7 +83,7 @@ static struct kmem_cache *ccid_kmem_cache_create(int obj_size, char *slab_name_f va_list args; va_start(args, fmt); - vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args); + vsnprintf(slab_name_fmt, CCID_SLAB_NAME_LENGTH, fmt, args); va_end(args); slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0, diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 269958b..6df6f8a 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -19,7 +19,9 @@ #include #include -#define CCID_MAX 255 +/* maximum value for a CCID (RFC 4340, 19.5) */ +#define CCID_MAX 255 +#define CCID_SLAB_NAME_LENGTH 32 struct tcp_info; @@ -49,8 +51,8 @@ struct ccid_operations { const char *ccid_name; struct kmem_cache *ccid_hc_rx_slab, *ccid_hc_tx_slab; - char ccid_hc_rx_slab_name[32]; - char ccid_hc_tx_slab_name[32]; + char ccid_hc_rx_slab_name[CCID_SLAB_NAME_LENGTH]; + char ccid_hc_tx_slab_name[CCID_SLAB_NAME_LENGTH]; __u32 ccid_hc_rx_obj_size, ccid_hc_tx_obj_size; /* Interface Routines */ -- cgit v0.10.2 From 1386be55e32a3c5d8ef4a2b243c530a7b664c02c Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 2 Feb 2010 20:16:56 +0000 Subject: dccp: fix auto-loading of dccp(_probe) This fixes commit (38ff3e6bb987ec583268da8eb22628293095d43b) ("dccp_probe: Fix module load dependencies between dccp and dccp_probe", from 15 Jan). It fixes the construction of the first argument of try_then_request_module(), where only valid return codes from the first argument should be returned. What we do now is assign the result of register_jprobe() to ret, without the side effect of the comparison. Acked-by: Gerrit Renker Signed-off-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/dccp/probe.c b/net/dccp/probe.c index bace1d8..f5b3464 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -161,8 +161,8 @@ static __init int dccpprobe_init(void) if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops)) goto err0; - ret = try_then_request_module((register_jprobe(&dccp_send_probe) == 0), - "dccp"); + try_then_request_module((ret = register_jprobe(&dccp_send_probe)) == 0, + "dccp"); if (ret) goto err1; -- cgit v0.10.2 From 88d1a0cf659438a66135661538ae332b23f8635a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 4 Feb 2010 09:55:51 +0900 Subject: Bluetooth: Fix memory leak in Marvell BT-over-SDIO driver Signed-off-by: Yoichi Yuasa Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index f36defa..57d965b 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -808,6 +808,7 @@ static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv, exit: sdio_release_host(card->func); + kfree(tmpbuf); return ret; } -- cgit v0.10.2 From c390216b3e868b16d8154939f4b6f8c16dbd9a9f Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Fri, 13 Nov 2009 14:16:32 -0800 Subject: Bluetooth: Enter active mode before establishing a SCO link. When in sniff mode with a long interval time (1.28s) it can take 4+ seconds to establish a SCO link. Fix by requesting active mode before requesting SCO connection. This improves SCO setup time to ~500ms. Bluetooth headsets that use a long interval time, and exhibit the long SCO connection time include Motorola H790, HX1 and H17. They have a CSR 2.1 chipset. Verified this behavior and fix with host Bluetooth chipsets: BCM4329 and TI1271. 2009-10-13 14:17:46.183722 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 1 mode 0x02 interval 2048 Mode: Sniff 2009-10-13 14:17:53.436285 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-10-13 14:17:53.445593 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-10-13 14:17:57.788855 > HCI Event: Synchronous Connect Complete 0x2c) plen 17 status 0x00 handle 257 bdaddr 00:1A:0E:F1:A4:7F type eSCO Air mode: CVSD Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index b7c4224..b10e3cd 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -377,6 +377,9 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 if (acl->state == BT_CONNECTED && (sco->state == BT_OPEN || sco->state == BT_CLOSED)) { + acl->power_save = 1; + hci_conn_enter_active_mode(acl); + if (lmp_esco_capable(hdev)) hci_setup_sync(sco, acl->handle); else -- cgit v0.10.2 From 41f3e0b1f524c47908e944a7e55f11c371ddddec Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Tue, 2 Feb 2010 04:16:20 +0000 Subject: netxen: fix tx timeout recovery for NX2031 chip For NX2031, first try to scrub interrupt before requesting firmware reset. Return statement was missing after scrubbbing interrupt. Signed-off-by: Vernon Mauery Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 9f9d608..5209095 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1941,7 +1941,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) netif_wake_queue(adapter->netdev); clear_bit(__NX_RESETTING, &adapter->state); - + return; } else { clear_bit(__NX_RESETTING, &adapter->state); if (!netxen_nic_reset_context(adapter)) { -- cgit v0.10.2 From e15eec2805565c7e31dbe402215637012f1e4616 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Tue, 2 Feb 2010 04:16:21 +0000 Subject: netxen: protect resource cleanup by rtnl lock o context resources can be in used, while resource cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 5209095..24279e6 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -2240,7 +2240,9 @@ netxen_detach_work(struct work_struct *work) netxen_nic_down(adapter, netdev); + rtnl_lock(); netxen_nic_detach(adapter); + rtnl_unlock(); status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1); -- cgit v0.10.2 From e44d38e1b72a2aa7f5e7024c5da83a879355a1cc Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 3 Feb 2010 13:12:51 +0000 Subject: ixgbe: Fix ixgbe_tx_map error path Commit e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove skb_dma_map/unmap calls from driver) looks to have introduced a bug in ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards through count until it becomes -1 and return that. The caller of ixgbe_tx_map expects 0 on error, so return that instead. Signed-off-by: Anton Blanchard Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b5f64ad..37e2af0 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5179,7 +5179,7 @@ dma_error: ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); } - return count; + return 0; } static void ixgbe_tx_queue(struct ixgbe_adapter *adapter, -- cgit v0.10.2 From fdd3d631cddad20ad9d3e1eb7dbf26825a8a121f Mon Sep 17 00:00:00 2001 From: Krishna Kumar Date: Wed, 3 Feb 2010 13:13:10 +0000 Subject: ixgbe: Fix return of invalid txq a developer had complained of getting lots of warnings: "eth16 selects TX queue 98, but real number of TX queues is 64" http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html As there was no follow up on that bug, I am submitting this patch assuming that the other return points will not return invalid txq's, and also that this fixes the bug (not tested). Signed-off-by: Krishna Kumar Signed-off-by: Jesse Brandeburg Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 37e2af0..7b7c848 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5329,8 +5329,11 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) struct ixgbe_adapter *adapter = netdev_priv(dev); int txq = smp_processor_id(); - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + while (unlikely(txq >= dev->real_num_tx_queues)) + txq -= dev->real_num_tx_queues; return txq; + } #ifdef IXGBE_FCOE if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && -- cgit v0.10.2 From 454debe45c86102528c90c12eb6a99245b773bfe Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 1 Feb 2010 08:21:34 +0000 Subject: irda: unbalanced lock_kernel in irnet_ppp Add the missing unlock_kernel in one ioctl operation. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 156020d..7c22c126f 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -706,7 +706,8 @@ dev_irnet_ioctl( lock_kernel(); if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan), (int __user *)argp)) - err = 0; + err = 0; + unlock_kernel(); break; /* All these ioctls can be passed both directly and from ppp_generic, -- cgit v0.10.2 From 3fdde0a1602d20c02a7d66e07ab6718ab8d79b12 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 1 Feb 2010 08:21:35 +0000 Subject: irda: add missing BKL in irnet_ppp ioctl One ioctl has been forgotten when the BKL was push down into irnet_ppp ioctl function. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 7c22c126f..6b3602d 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -698,9 +698,11 @@ dev_irnet_ioctl( /* Query PPP channel and unit number */ case PPPIOCGCHAN: + lock_kernel(); if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan), (int __user *)argp)) err = 0; + unlock_kernel(); break; case PPPIOCGUNIT: lock_kernel(); -- cgit v0.10.2 From bc496ed00ab1411d3efaf295b72e0c9eb343e1a3 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Mon, 1 Feb 2010 13:11:38 -0500 Subject: libata-scsi passthru: fix bug which truncated LBA48 return values Fix assignment which overwrote SAT ATA PASS-THROUGH command EXTEND bit setting (ATA_TFLAG_LBA48) Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f4ea5a8..d096fbc 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2875,7 +2875,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * write indication (used for PIO/DMA setup), result TF is * copied back and we don't whine too much about its failure. */ - tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; if (scmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; -- cgit v0.10.2 From f7acede65d6b65919aee5b6a360a17cedb11f2f7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 28 Jan 2010 13:30:11 +0100 Subject: libata: fix ata_id_logical_per_physical_sectors The value we get from the low byte of the ATA_ID_SECTOR_SIZE word is not not a plain multiple, but the log of it, so fix the helper to give the correct answer. Without this we'll get an incorrect minimal I/O size in the block limits VPD page for 4k sector drives. Also change the return value of ata_id_logical_per_physical_sectors to u16 for the unlikely case of very large logical sectors. Signed-off-by: Christoph Hellwig Signed-off-by: Jeff Garzik diff --git a/include/linux/ata.h b/include/linux/ata.h index 38a6948..20f3156 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -647,9 +647,9 @@ static inline int ata_id_has_large_logical_sectors(const u16 *id) return id[ATA_ID_SECTOR_SIZE] & (1 << 13); } -static inline u8 ata_id_logical_per_physical_sectors(const u16 *id) +static inline u16 ata_id_logical_per_physical_sectors(const u16 *id) { - return id[ATA_ID_SECTOR_SIZE] & 0xf; + return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf); } static inline int ata_id_has_lba48(const u16 *id) -- cgit v0.10.2 From cedc9bf906dae044443d403371c887affdb44168 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 28 Jan 2010 16:04:15 +0900 Subject: ahci: add Acer G725 to broken suspend list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acer G725 shares the same suspend problem with the HP laptops which lose ATA devices on resume. New firmware which fixes the problem is already available. Add G725 with old firmwares to the broken suspend list. This problem has been reported in bko#15104. http://bugzilla.kernel.org/show_bug.cgi?id=15104 Signed-off-by: Tejun Heo Reported-by: Jani-Matti Hätinen Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b8bea10..b343903 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2868,6 +2868,21 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) }, .driver_data = "F.23", /* cutoff BIOS version */ }, + /* + * Acer eMachines G725 has the same problem. BIOS + * V1.03 is known to be broken. V3.04 is known to + * work. Inbetween, there are V1.06, V2.06 and V3.03 + * that we don't have much idea about. For now, + * blacklist anything older than V3.04. + */ + { + .ident = "G725", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "eMachines"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"), + }, + .driver_data = "V3.04", /* cutoff BIOS version */ + }, { } /* terminate list */ }; const struct dmi_system_id *dmi = dmi_first_match(sysids); -- cgit v0.10.2 From 2d68b7fe55d9e19a8a868224ed0dfd6526568521 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 4 Feb 2010 01:04:50 -0500 Subject: [libata] Call flush_dcache_page after PIO data transfers in libata-sff.c flush_dcache_page() must be called after (!ATA_TFLAG_WRITE) the data copying to avoid D-cache aliasing with user space or I-D cache coherency issues (when reading data from an ATA device using PIO, the kernel dirties the D-cache but there is no flush_dcache_page() required on Harvard architectures). Signed-off-by: Catalin Marinas Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 741065c..730ef3c 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -893,6 +893,9 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) do_write); } + if (!do_write) + flush_dcache_page(page); + qc->curbytes += qc->sect_size; qc->cursg_ofs += qc->sect_size; -- cgit v0.10.2 From 06df6dafb5d9e3cfa3588c6ce79328b91582b6af Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 4 Feb 2010 14:43:38 +0900 Subject: x86/agp: Fix amd64-agp module initialization regression This fixes the regression introduced by commit 42590a75019a50012f25a962246498dead428433 ("x86/agp: Fix agp_amd64_init and agp_amd64_cleanup"). The commit 61684ceaad4f65d1a9832c722f7bd5e7fc714de9 fixed the above regression but it's not enough. When amd64-agp is built as a module, AGP isn't initialized, iommu is initialized, all the aperture is owned by the iommu. Reported-by: Marin Mitov Signed-off-by: FUJITA Tomonori Tested-by: Marin Mitov LKML-Reference: <20100204090802S.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 34cf04e..fd50ead 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -767,16 +767,19 @@ int __init agp_amd64_init(void) static int __init agp_amd64_mod_init(void) { +#ifndef MODULE if (gart_iommu_aperture) return agp_bridges_found ? 0 : -ENODEV; - +#endif return agp_amd64_init(); } static void __exit agp_amd64_cleanup(void) { +#ifndef MODULE if (gart_iommu_aperture) return; +#endif if (aperture_resource) release_resource(aperture_resource); pci_unregister_driver(&agp_amd64_pci_driver); -- cgit v0.10.2 From f044ba7835b84e69c68b620ca8fa27e5ef67759d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 4 Feb 2010 08:46:56 +0000 Subject: Btrfs: fix race between allocate and release extent buffer. Increase extent buffer's reference count while holding the lock. Otherwise it can race with try_release_extent_buffer. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 96577e8..b177ed3 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3165,10 +3165,9 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, spin_unlock(&tree->buffer_lock); goto free_eb; } - spin_unlock(&tree->buffer_lock); - /* add one reference for the tree */ atomic_inc(&eb->refs); + spin_unlock(&tree->buffer_lock); return eb; free_eb: -- cgit v0.10.2 From 014e4ac4f7d9c981750491fa40ea35efadc9ed49 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 29 Jan 2010 10:42:11 +0000 Subject: Btrfs: make error return negative in btrfs_sync_file() It appears the error return should be negative Signed-off-by: Roel Kluin Signed-off-by: Chris Mason diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index ae96fda..413a30d 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1133,7 +1133,7 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync) } mutex_lock(&dentry->d_inode->i_mutex); out: - return ret > 0 ? EIO : ret; + return ret > 0 ? -EIO : ret; } static const struct vm_operations_struct btrfs_file_vm_ops = { -- cgit v0.10.2 From d7ce5843bb28ada6845ab2ae8510ba3f12d33154 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 2 Feb 2010 08:46:44 +0000 Subject: Btrfs: remove BUG_ON() due to mounting bad filesystem Mounting a bad filesystem caused a BUG_ON(). The following is steps to reproduce it. # mkfs.btrfs /dev/sda2 # mount /dev/sda2 /mnt # mkfs.btrfs /dev/sda1 /dev/sda2 (the program says that /dev/sda2 was mounted, and then exits. ) # umount /mnt # mount /dev/sda1 /mnt At the third step, mkfs.btrfs exited in the way of make filesystem. So the initialization of the filesystem didn't finish. So the filesystem was bad, and it caused BUG_ON() when mounting it. But BUG_ON() should be called by the wrong code, not user's operation, so I think it is a bug of btrfs. This patch fixes it. Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 87b2554..2b59201 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1982,7 +1982,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!(sb->s_flags & MS_RDONLY)) { ret = btrfs_recover_relocation(tree_root); - BUG_ON(ret); + if (ret < 0) { + printk(KERN_WARNING + "btrfs: failed to recover relocation\n"); + err = -EINVAL; + goto fail_trans_kthread; + } } location.objectid = BTRFS_FS_TREE_OBJECTID; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index ed3e4a2..ab7ab53 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3764,7 +3764,8 @@ out: BTRFS_DATA_RELOC_TREE_OBJECTID); if (IS_ERR(fs_root)) err = PTR_ERR(fs_root); - btrfs_orphan_cleanup(fs_root); + else + btrfs_orphan_cleanup(fs_root); } return err; } -- cgit v0.10.2 From 7a7965f83e89f0be506a96769938a721e4e5ae50 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 1 Feb 2010 02:41:17 +0000 Subject: Btrfs: Fix oopsen when dropping empty tree. When dropping a empty tree, walk_down_tree() skips checking extent information for the tree root. This will triggers a BUG_ON in walk_up_proc(). Signed-off-by: Yan Zheng Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 432a2da..559f724 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5402,10 +5402,6 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans, int ret; while (level >= 0) { - if (path->slots[level] >= - btrfs_header_nritems(path->nodes[level])) - break; - ret = walk_down_proc(trans, root, path, wc, lookup_info); if (ret > 0) break; @@ -5413,6 +5409,10 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans, if (level == 0) break; + if (path->slots[level] >= + btrfs_header_nritems(path->nodes[level])) + break; + ret = do_walk_down(trans, root, path, wc, &lookup_info); if (ret > 0) { path->slots[level]++; -- cgit v0.10.2 From efd049fb26a162c3830fd3cb1001fdc09b147f3b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 2 Feb 2010 20:50:10 +0000 Subject: Btrfs: do not try and lookup the file extent when finishing ordered io When running the following fio job [torrent] filename=torrent-test rw=randwrite size=4g filesize=4g bs=4k ioengine=sync you would see long stalls where no work was being done. That is because we were doing all this extra work to read in the file extent outside of the transaction, however in the random io case this ends up hurting us because the file extents are not there to begin with. So axe this logic, since we end up reading in the file extent when we go to update it anyway. This took the fio job from 11 mb/s with several ~10 second stalls to 24 mb/s to a couple of 1-2 second stalls. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8cd1099..6782aa1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1681,24 +1681,6 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, * before we start the transaction. It limits the amount of btree * reads required while inside the transaction. */ -static noinline void reada_csum(struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_ordered_extent *ordered_extent) -{ - struct btrfs_ordered_sum *sum; - u64 bytenr; - - sum = list_entry(ordered_extent->list.next, struct btrfs_ordered_sum, - list); - bytenr = sum->sums[0].bytenr; - - /* - * we don't care about the results, the point of this search is - * just to get the btree leaves into ram - */ - btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, bytenr, 0); -} - /* as ordered data IO finishes, this gets called so we can finish * an ordered extent if the range of bytes in the file it covers are * fully written. @@ -1709,7 +1691,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) struct btrfs_trans_handle *trans; struct btrfs_ordered_extent *ordered_extent = NULL; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; - struct btrfs_path *path; int compressed = 0; int ret; @@ -1717,32 +1698,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) if (!ret) return 0; - /* - * before we join the transaction, try to do some of our IO. - * This will limit the amount of IO that we have to do with - * the transaction running. We're unlikely to need to do any - * IO if the file extents are new, the disk_i_size checks - * covers the most common case. - */ - if (start < BTRFS_I(inode)->disk_i_size) { - path = btrfs_alloc_path(); - if (path) { - ret = btrfs_lookup_file_extent(NULL, root, path, - inode->i_ino, - start, 0); - ordered_extent = btrfs_lookup_ordered_extent(inode, - start); - if (!list_empty(&ordered_extent->list)) { - btrfs_release_path(root, path); - reada_csum(root, path, ordered_extent); - } - btrfs_free_path(path); - } - } - - if (!ordered_extent) - ordered_extent = btrfs_lookup_ordered_extent(inode, start); + ordered_extent = btrfs_lookup_ordered_extent(inode, start); BUG_ON(!ordered_extent); + if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { BUG_ON(!list_empty(&ordered_extent->list)); ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); -- cgit v0.10.2 From 23b5c50945f2294add0137799400329c0ebba290 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 4 Feb 2010 11:33:03 -0500 Subject: Btrfs: apply updated fallocate i_size fix This version of the i_size fix for fallocate makes sure we only update the i_size when the current fallocate is really operating outside of i_size. Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6782aa1..4deb280 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5799,7 +5799,9 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, inode->i_ctime = CURRENT_TIME; BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && - cur_offset > inode->i_size) { + (actual_len > inode->i_size) && + (cur_offset > inode->i_size)) { + if (cur_offset > actual_len) i_size = actual_len; else -- cgit v0.10.2 From 33c5fd121eabbccc9103daf6cda36941eb3c349f Mon Sep 17 00:00:00 2001 From: David John Date: Wed, 27 Jan 2010 15:19:08 +0530 Subject: drm/i915: Disable SR when more than one pipe is enabled Self Refresh should be disabled on dual plane configs. Otherwise, as the SR watermark is not calculated for such configs, switching to non VGA mode causes FIFO underrun and display flicker. This fixes Korg Bug #14897. Signed-off-by: David John Signed-off-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5f14dfb..12775df 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2520,6 +2520,10 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, sr_entries = roundup(sr_entries / cacheline_size, 1); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", @@ -2563,6 +2567,10 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm = 1; srwm &= 0x3f; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", @@ -2631,6 +2639,10 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, if (srwm < 0) srwm = 1; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", -- cgit v0.10.2 From 67026e03244d76b8f1fa725b079d4182fe8910aa Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 2 Feb 2010 20:09:04 +0100 Subject: drm/i915: slow acpi_lid_open() causes flickering - V2 acpi_lid_open() could take up to 10ms on my computer. Some component is calling the drm GETCONNECTOR ioctl many times in a row. This results in flickering (for example, when starting a video). Fix it by assuming an always connected lid status. Signed-off-by: Thomas Meyer Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 75a9772..b1d0acb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -623,6 +623,13 @@ static const struct dmi_system_id bad_lid_status[] = { }, }, { + .ident = "Aspire 1810T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"), + }, + }, + { .ident = "PC-81005", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MALATA"), @@ -643,7 +650,7 @@ static enum drm_connector_status intel_lvds_detect(struct drm_connector *connect { enum drm_connector_status status = connector_status_connected; - if (!acpi_lid_open() && !dmi_check_system(bad_lid_status)) + if (!dmi_check_system(bad_lid_status) && !acpi_lid_open()) status = connector_status_disconnected; return status; -- cgit v0.10.2 From 93533c291a0af78ca57115fc44d2e6c4c9517cd2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 31 Jan 2010 10:40:48 +0000 Subject: drm/i915: Fix leak of relocs along do_execbuffer error path Following a gpu hang, we would leak the relocation buffer. So simply earrange the error path to always free the relocation buffer. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 1ef7ec4..be0fd1a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3584,6 +3584,9 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t reloc_count = 0, i; int ret = 0; + if (relocs == NULL) + return 0; + for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; int unwritten; @@ -3673,7 +3676,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; struct drm_clip_rect *cliprects = NULL; - struct drm_i915_gem_relocation_entry *relocs; + struct drm_i915_gem_relocation_entry *relocs = NULL; int ret = 0, ret2, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains, reloc_index; @@ -3950,6 +3953,7 @@ err: mutex_unlock(&dev->struct_mutex); +pre_mutex_err: /* Copy the updated relocations out regardless of current error * state. Failure to update the relocs would mean that the next * time userland calls execbuf, it would do so with presumed offset @@ -3964,7 +3968,6 @@ err: ret = ret2; } -pre_mutex_err: drm_free_large(object_list); kfree(cliprects); -- cgit v0.10.2 From feeb2721a7a0bd0cfa5b8847f80aec93aa2cc00d Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 3 Feb 2010 21:59:51 +0000 Subject: igb: make certain to reassign legacy interrupt vectors after reset This change corrects an issue that will cause false hangs when using either 82575 or 82580 in legacy interrupt mode. The issue is caused when there is a slow traffic flow and an "ethtool -r" is executed while using legacy or MSI interrupts. MSI-X is not affected by this issue due to the fact that we were already reconfiguring the vectors after reset. If possible it would be best to push this for net-2.6 since it is resolving a bug but if that is not possible then net-next-2.6 will be fine. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 997124d..c881347 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -421,6 +421,8 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; if (tx_queue > IGB_N0_QUEUE) msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; + if (!adapter->msix_entries && msix_vector == 0) + msixbm |= E1000_EIMS_OTHER; array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); q_vector->eims_value = msixbm; break; @@ -877,7 +879,6 @@ static int igb_request_irq(struct igb_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; int err = 0; if (adapter->msix_entries) { @@ -909,20 +910,7 @@ static int igb_request_irq(struct igb_adapter *adapter) igb_setup_all_tx_resources(adapter); igb_setup_all_rx_resources(adapter); } else { - switch (hw->mac.type) { - case e1000_82575: - wr32(E1000_MSIXBM(0), - (E1000_EICR_RX_QUEUE0 | - E1000_EICR_TX_QUEUE0 | - E1000_EIMS_OTHER)); - break; - case e1000_82580: - case e1000_82576: - wr32(E1000_IVAR0, E1000_IVAR_VALID); - break; - default: - break; - } + igb_assign_vector(adapter->q_vector[0], 0); } if (adapter->flags & IGB_FLAG_HAS_MSI) { @@ -1140,6 +1128,8 @@ int igb_up(struct igb_adapter *adapter) } if (adapter->msix_entries) igb_configure_msix(adapter); + else + igb_assign_vector(adapter->q_vector[0], 0); /* Clear any pending interrupts. */ rd32(E1000_ICR); -- cgit v0.10.2 From 21956b61f594f7924d98240da74bc81c28601fa9 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 2 Feb 2010 19:58:25 +0100 Subject: ALSA: ctxfi - fix PTP address initialization After hours of debugging, I finally found the reason why some source and runtime combination does not work. The PTP (page table pages) address must be aligned. I am not sure how much, but alignment to PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines to ensure proper virtual -> physical address translation. Cc: Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c index cb65bd0..459c1f6 100644 --- a/sound/pci/ctxfi/ctatc.c +++ b/sound/pci/ctxfi/ctatc.c @@ -166,18 +166,7 @@ static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm) static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index) { - struct ct_vm *vm; - void *kvirt_addr; - unsigned long phys_addr; - - vm = atc->vm; - kvirt_addr = vm->get_ptp_virt(vm, index); - if (kvirt_addr == NULL) - phys_addr = (~0UL); - else - phys_addr = virt_to_phys(kvirt_addr); - - return phys_addr; + return atc->vm->get_ptp_phys(atc->vm, index); } static unsigned int convert_format(snd_pcm_format_t snd_format) @@ -1669,7 +1658,7 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, } /* Set up device virtual memory management object */ - err = ct_vm_create(&atc->vm); + err = ct_vm_create(&atc->vm, pci); if (err < 0) goto error1; diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c index 6b78752..65da6e4 100644 --- a/sound/pci/ctxfi/ctvmem.c +++ b/sound/pci/ctxfi/ctvmem.c @@ -138,7 +138,7 @@ ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size) return NULL; } - ptp = vm->ptp[0]; + ptp = (unsigned long *)vm->ptp[0].area; pte_start = (block->addr >> CT_PAGE_SHIFT); pages = block->size >> CT_PAGE_SHIFT; for (i = 0; i < pages; i++) { @@ -158,25 +158,25 @@ static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block) } /* * - * return the host (kmalloced) addr of the @index-th device - * page talbe page on success, or NULL on failure. - * The first returned NULL indicates the termination. + * return the host physical addr of the @index-th device + * page table page on success, or ~0UL on failure. + * The first returned ~0UL indicates the termination. * */ -static void * -ct_get_ptp_virt(struct ct_vm *vm, int index) +static dma_addr_t +ct_get_ptp_phys(struct ct_vm *vm, int index) { - void *addr; + dma_addr_t addr; - addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index]; + addr = (index >= CT_PTP_NUM) ? ~0UL : vm->ptp[index].addr; return addr; } -int ct_vm_create(struct ct_vm **rvm) +int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci) { struct ct_vm *vm; struct ct_vm_block *block; - int i; + int i, err = 0; *rvm = NULL; @@ -188,23 +188,21 @@ int ct_vm_create(struct ct_vm **rvm) /* Allocate page table pages */ for (i = 0; i < CT_PTP_NUM; i++) { - vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!vm->ptp[i]) + err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(pci), + PAGE_SIZE, &vm->ptp[i]); + if (err < 0) break; } - if (!i) { + if (err < 0) { /* no page table pages are allocated */ - kfree(vm); + ct_vm_destroy(vm); return -ENOMEM; } vm->size = CT_ADDRS_PER_PAGE * i; - /* Initialise remaining ptps */ - for (; i < CT_PTP_NUM; i++) - vm->ptp[i] = NULL; - vm->map = ct_vm_map; vm->unmap = ct_vm_unmap; - vm->get_ptp_virt = ct_get_ptp_virt; + vm->get_ptp_phys = ct_get_ptp_phys; INIT_LIST_HEAD(&vm->unused); INIT_LIST_HEAD(&vm->used); block = kzalloc(sizeof(*block), GFP_KERNEL); @@ -242,7 +240,7 @@ void ct_vm_destroy(struct ct_vm *vm) /* free allocated page table pages */ for (i = 0; i < CT_PTP_NUM; i++) - kfree(vm->ptp[i]); + snd_dma_free_pages(&vm->ptp[i]); vm->size = 0; diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h index 01e4fd0..b23adfc 100644 --- a/sound/pci/ctxfi/ctvmem.h +++ b/sound/pci/ctxfi/ctvmem.h @@ -22,6 +22,8 @@ #include #include +#include +#include /* The chip can handle the page table of 4k pages * (emu20k1 can handle even 8k pages, but we don't use it right now) @@ -41,7 +43,7 @@ struct snd_pcm_substream; /* Virtual memory management object for card device */ struct ct_vm { - void *ptp[CT_PTP_NUM]; /* Device page table pages */ + struct snd_dma_buffer ptp[CT_PTP_NUM]; /* Device page table pages */ unsigned int size; /* Available addr space in bytes */ struct list_head unused; /* List of unused blocks */ struct list_head used; /* List of used blocks */ @@ -52,10 +54,10 @@ struct ct_vm { int size); /* Unmap device logical addr area. */ void (*unmap)(struct ct_vm *, struct ct_vm_block *block); - void *(*get_ptp_virt)(struct ct_vm *vm, int index); + dma_addr_t (*get_ptp_phys)(struct ct_vm *vm, int index); }; -int ct_vm_create(struct ct_vm **rvm); +int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci); void ct_vm_destroy(struct ct_vm *vm); #endif /* CTVMEM_H */ -- cgit v0.10.2 From 1b3f720bf033fde1fbb6231f9b156b918c5f68d8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 4 Feb 2010 14:00:41 -0800 Subject: pktgen: Fix freezing problem Add missing try_to_freeze() to one of the pktgen_thread_worker() code paths so that it doesn't block suspend/hibernation. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=15006 Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Ciprian Dorin Craciun Signed-off-by: David S. Miller diff --git a/net/core/pktgen.c b/net/core/pktgen.c index de0c2c7..2e692af 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3524,6 +3524,7 @@ static int pktgen_thread_worker(void *arg) wait_event_interruptible_timeout(t->queue, t->control != 0, HZ/10); + try_to_freeze(); continue; } -- cgit v0.10.2 From 6f14a668f1a8b715a6e855f4e32705e54a6e86a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 4 Feb 2010 17:57:37 +0900 Subject: idr: revert misallocation bug fix Commit 859ddf09743a8cc680af33f7259ccd0fd36bfe9d tried to fix misallocation bug but broke full bit marking by not clearing pa[idp->layers] and also is causing X failures due to lookup failure in drm code. The cause of the latter hasn't been found yet. Revert the fix for now. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds diff --git a/lib/idr.c b/lib/idr.c index ba7d37c..1cac726 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -140,7 +140,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = *starting_id; restart: p = idp->top; - l = p->layer; + l = idp->layers; + pa[l--] = NULL; while (1) { /* * We run around this while until we reach the leaf node... @@ -154,8 +155,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) oid = id; id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; - /* did id go over the limit? */ - if (id >= (1 << (idp->layers * IDR_BITS))) { + /* if already at the top layer, we need to grow */ + if (!(p = pa[l])) { *starting_id = id; return IDR_NEED_TO_GROW; } -- cgit v0.10.2 From c38c7b64a2747a211c3a6e8e5919ee25ccd474e7 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 4 Feb 2010 17:27:27 +0100 Subject: drm/radeon/kms: move blit initialization after we disabled VGA VGA might be overwritting VRAM and corrupt our blit shader leading to corruption, it likely won't happen if you load fbcon right after radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down this issue. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index b833b4b..8c94040 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1861,6 +1861,12 @@ int r600_startup(struct radeon_device *rdev) return r; } r600_gpu_init(rdev); + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } /* pin copy shader into vram */ if (rdev->r600_blit.shader_obj) { r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); @@ -2045,12 +2051,6 @@ int r600_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; - r = r600_blit_init(rdev); - if (r) { - r600_blit_fini(rdev); - rdev->asic->copy = NULL; - dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); - } rdev->accel_working = true; r = r600_startup(rdev); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 2d46576..06b037e 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -887,6 +887,12 @@ static int rv770_startup(struct radeon_device *rdev) return r; } rv770_gpu_init(rdev); + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } /* pin copy shader into vram */ if (rdev->r600_blit.shader_obj) { r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); @@ -1055,12 +1061,6 @@ int rv770_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; - r = r600_blit_init(rdev); - if (r) { - r600_blit_fini(rdev); - rdev->asic->copy = NULL; - dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); - } rdev->accel_working = true; r = rv770_startup(rdev); -- cgit v0.10.2 From 062b389c8704e539e234cfd67c7e034a514f50bf Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 4 Feb 2010 20:36:39 +0100 Subject: drm/radeon/kms: fix regression rendering issue on R6XX/R7XX It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186 Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 8c94040..45d565b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2900,3 +2900,18 @@ int r600_debugfs_mc_info_init(struct radeon_device *rdev) return 0; #endif } + +/** + * r600_ioctl_wait_idle - flush host path cache on wait idle ioctl + * rdev: radeon device structure + * bo: buffer object struct which userspace is waiting for idle + * + * Some R6XX/R7XX doesn't seems to take into account HDP flush performed + * through ring buffer, this leads to corruption in rendering, see + * http://bugzilla.kernel.org/show_bug.cgi?id=15186 to avoid this we + * directly perform HDP flush by writing register through MMIO. + */ +void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo) +{ + WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1); +} diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 2d5f2bf..37150fc 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -661,6 +661,13 @@ struct radeon_asic { void (*hpd_fini)(struct radeon_device *rdev); bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd); void (*hpd_set_polarity)(struct radeon_device *rdev, enum radeon_hpd_id hpd); + /* ioctl hw specific callback. Some hw might want to perform special + * operation on specific ioctl. For instance on wait idle some hw + * might want to perform and HDP flush through MMIO as it seems that + * some R6XX/R7XX hw doesn't take HDP flush into account if programmed + * through ring. + */ + void (*ioctl_wait_idle)(struct radeon_device *rdev, struct radeon_bo *bo); }; /* diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index f2fbd2e..05ee1ae 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -117,6 +117,7 @@ static struct radeon_asic r100_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -176,6 +177,7 @@ static struct radeon_asic r300_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; /* @@ -219,6 +221,7 @@ static struct radeon_asic r420_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -267,6 +270,7 @@ static struct radeon_asic rs400_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -323,6 +327,7 @@ static struct radeon_asic rs600_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -370,6 +375,7 @@ static struct radeon_asic rs690_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -421,6 +427,7 @@ static struct radeon_asic rv515_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -463,6 +470,7 @@ static struct radeon_asic r520_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; /* @@ -504,6 +512,7 @@ void r600_hpd_fini(struct radeon_device *rdev); bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); void r600_hpd_set_polarity(struct radeon_device *rdev, enum radeon_hpd_id hpd); +extern void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo); static struct radeon_asic r600_asic = { .init = &r600_init, @@ -538,6 +547,7 @@ static struct radeon_asic r600_asic = { .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, .hpd_set_polarity = &r600_hpd_set_polarity, + .ioctl_wait_idle = r600_ioctl_wait_idle, }; /* @@ -582,6 +592,7 @@ static struct radeon_asic rv770_asic = { .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, .hpd_set_polarity = &r600_hpd_set_polarity, + .ioctl_wait_idle = r600_ioctl_wait_idle, }; #endif diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 0e1325e..db8e9a3 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -308,6 +308,9 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, } robj = gobj->driver_private; r = radeon_bo_wait(robj, NULL, false); + /* callback hw specific functions if any */ + if (robj->rdev->asic->ioctl_wait_idle) + robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj); mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); -- cgit v0.10.2 From 9e5b2af75abc67c13005c706cf95bbbb78f7fddc Mon Sep 17 00:00:00 2001 From: Pauli Nieminen Date: Thu, 4 Feb 2010 19:20:53 +0200 Subject: drm/r100/kms: Emit cache flush to the end of command buffer. (v2) Cache flush is required in case CPU is accessing rendered data. This fixes glean/readPixSanity test case and random rendering errors in sauerbraten and warzone2100. v2 Fix comment ordering in r100_fence_ring_emit and remove extra defines added in first version. Signed-off-by: Pauli Nieminen Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 11c9a3f..626e790 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -354,11 +354,17 @@ u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc) return RREG32(RADEON_CRTC2_CRNT_FRAME); } +/* Who ever call radeon_fence_emit should call ring_lock and ask + * for enough space (today caller are ib schedule and buffer move) */ void r100_fence_ring_emit(struct radeon_device *rdev, struct radeon_fence *fence) { - /* Who ever call radeon_fence_emit should call ring_lock and ask - * for enough space (today caller are ib schedule and buffer move) */ + /* We have to make sure that caches are flushed before + * CPU might read something from VRAM. */ + radeon_ring_write(rdev, PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RADEON_RB3D_DC_FLUSH_ALL); + radeon_ring_write(rdev, PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RADEON_RB3D_ZC_FLUSH_ALL); /* Wait until IDLE & CLEAN */ radeon_ring_write(rdev, PACKET0(0x1720, 0)); radeon_ring_write(rdev, (1 << 16) | (1 << 17)); -- cgit v0.10.2 From d7748bacbbee80b2cc4b690a74d5db2cd84acd7b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 2 Feb 2010 14:40:33 -0800 Subject: ati_pcigart: fix printk format warning Fix ati_pcigart printk format warning: drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Randy Dunlap Cc: Zhenyu Wang Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c index a1fce68..17be051 100644 --- a/drivers/gpu/drm/ati_pcigart.c +++ b/drivers/gpu/drm/ati_pcigart.c @@ -113,7 +113,7 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) { DRM_ERROR("fail to set dma mask to 0x%Lx\n", - gart_info->table_mask); + (unsigned long long)gart_info->table_mask); ret = 1; goto done; } -- cgit v0.10.2 From 94cf6434a1bc5958d5da3be62f1272792dada2bf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Feb 2010 14:40:29 -0800 Subject: drivers/gpu/drm/radeon/radeon_combios.c: fix warning drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 579c892..e7b1944 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -971,8 +971,7 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); - if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) - lvds->panel_vcc_delay = 2000; + lvds->panel_vcc_delay = min_t(u16, lvds->panel_vcc_delay, 2000); lvds->panel_pwr_delay = RBIOS8(lcd_info + 0x24); lvds->panel_digon_delay = RBIOS16(lcd_info + 0x38) & 0xf; -- cgit v0.10.2 From 655efd3dc92cd0d37292157178d33deb0430aeaa Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 2 Feb 2010 11:51:45 +0100 Subject: drm/radeon/kms: don't call suspend path before cleaning up GPU In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 626e790..c0d4650 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3375,7 +3375,6 @@ int r100_suspend(struct radeon_device *rdev) void r100_fini(struct radeon_device *rdev) { - r100_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -3487,13 +3486,12 @@ int r100_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r100_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 0051d11..e699e6d 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1327,7 +1327,6 @@ int r300_suspend(struct radeon_device *rdev) void r300_fini(struct radeon_device *rdev) { - r300_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -1418,15 +1417,15 @@ int r300_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r300_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); - radeon_irq_kms_fini(rdev); + radeon_agp_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 4526faa..d937324 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -389,16 +389,15 @@ int r420_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r420_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 9a18907..ddf5731 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -294,13 +294,12 @@ int r520_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); rv370_pcie_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 45d565b..9661a46 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1654,6 +1654,12 @@ void r600_ring_init(struct radeon_device *rdev, unsigned ring_size) rdev->cp.align_mask = 16 - 1; } +void r600_cp_fini(struct radeon_device *rdev) +{ + r600_cp_stop(rdev); + radeon_ring_fini(rdev); +} + /* * GPU scratch registers helpers function. @@ -2055,9 +2061,11 @@ int r600_init(struct radeon_device *rdev) rdev->accel_working = true; r = r600_startup(rdev); if (r) { - r600_suspend(rdev); + dev_err(rdev->dev, "disabling GPU acceleration\n"); + r600_cp_fini(rdev); r600_wb_fini(rdev); - radeon_ring_fini(rdev); + r600_irq_fini(rdev); + radeon_irq_kms_fini(rdev); r600_pcie_gart_fini(rdev); rdev->accel_working = false; } @@ -2083,20 +2091,17 @@ int r600_init(struct radeon_device *rdev) void r600_fini(struct radeon_device *rdev) { - /* Suspend operations */ - r600_suspend(rdev); - r600_audio_fini(rdev); r600_blit_fini(rdev); + r600_cp_fini(rdev); + r600_wb_fini(rdev); r600_irq_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_ring_fini(rdev); - r600_wb_fini(rdev); r600_pcie_gart_fini(rdev); + radeon_agp_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); radeon_clocks_fini(rdev); - radeon_agp_fini(rdev); radeon_bo_fini(rdev); radeon_atombios_fini(rdev); kfree(rdev->bios); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 37150fc..f57480b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1150,6 +1150,7 @@ extern bool r600_card_posted(struct radeon_device *rdev); extern void r600_cp_stop(struct radeon_device *rdev); extern void r600_ring_init(struct radeon_device *rdev, unsigned ring_size); extern int r600_cp_resume(struct radeon_device *rdev); +extern void r600_cp_fini(struct radeon_device *rdev); extern int r600_count_pipe_bits(uint32_t val); extern int r600_gart_clear_page(struct radeon_device *rdev, int i); extern int r600_mc_wait_for_idle(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 9f54189..eeeb0d6 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -448,7 +448,6 @@ int rs400_suspend(struct radeon_device *rdev) void rs400_fini(struct radeon_device *rdev) { - rs400_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -527,7 +526,6 @@ int rs400_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs400_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index d525575..c381856 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -610,7 +610,6 @@ int rs600_suspend(struct radeon_device *rdev) void rs600_fini(struct radeon_device *rdev) { - rs600_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -689,7 +688,6 @@ int rs600_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs600_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index cd31da9..06e2771 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -676,7 +676,6 @@ int rs690_suspend(struct radeon_device *rdev) void rs690_fini(struct radeon_device *rdev) { - rs690_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -756,7 +755,6 @@ int rs690_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs690_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 6275671..0e1e6b8 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -537,7 +537,6 @@ void rv515_set_safe_registers(struct radeon_device *rdev) void rv515_fini(struct radeon_device *rdev) { - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -615,13 +614,12 @@ int rv515_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); rv370_pcie_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 06b037e..c9320e7 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1065,9 +1065,11 @@ int rv770_init(struct radeon_device *rdev) rdev->accel_working = true; r = rv770_startup(rdev); if (r) { - rv770_suspend(rdev); + dev_err(rdev->dev, "disabling GPU acceleration\n"); + r600_cp_fini(rdev); r600_wb_fini(rdev); - radeon_ring_fini(rdev); + r600_irq_fini(rdev); + radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); rdev->accel_working = false; } @@ -1089,13 +1091,11 @@ int rv770_init(struct radeon_device *rdev) void rv770_fini(struct radeon_device *rdev) { - rv770_suspend(rdev); - r600_blit_fini(rdev); + r600_cp_fini(rdev); + r600_wb_fini(rdev); r600_irq_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_ring_fini(rdev); - r600_wb_fini(rdev); rv770_pcie_gart_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); -- cgit v0.10.2 From 23fff28a9b0529869bffef8aab0d3f350dd3b5a4 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 11:57:42 +1000 Subject: drm/radeon/kms: disable HDMI audio for now on rv710/rv730 Support isn't correct yet and we are getting green tinges on the displays. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c index 99e2c38..b1c1d34 100644 --- a/drivers/gpu/drm/radeon/r600_audio.c +++ b/drivers/gpu/drm/radeon/r600_audio.c @@ -35,7 +35,7 @@ */ static int r600_audio_chipset_supported(struct radeon_device *rdev) { - return rdev->family >= CHIP_R600 + return (rdev->family >= CHIP_R600 && rdev->family < CHIP_RV710) || rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740; -- cgit v0.10.2 From 624ab4f87e99f10ea3b45e76039c477fd4d7a7e6 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 27 Jan 2010 16:07:15 +1000 Subject: drm/radeon/kms: make initial state of load detect property correct. this was incorrect on my rs480. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5526641..2d8e5a7 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1343,7 +1343,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->dac_load_detect = false; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, - 1); + radeon_connector->dac_load_detect); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, radeon_combios_get_tv_info(rdev)); -- cgit v0.10.2 From 2717568e7c44fe7dc3f4f52ea823811cfeede2b5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 4 Feb 2010 06:57:58 +0000 Subject: usb: r8a66597-hcd: Flush the D-cache for the pipe-in transfer buffers. This implements the same D-cache flushing logic for r8a66597-hcd as Catalin's isp1760 (http://patchwork.kernel.org/patch/76391/) change, with the same note applying here as well: When the HDC driver writes the data to the transfer buffers it pollutes the D-cache (unlike DMA drivers where the device writes the data). If the corresponding pages get mapped into user space, there are no additional cache flushing operations performed and this causes random user space faults on architectures with separate I and D caches (Harvard) or those with aliasing D-cache. This fixes up crashes during USB boot on SH7724 and others: http://marc.info/?l=linux-sh&m=126439837308912&w=2 Reported-by: Goda Yusuke Tested-by: Goda Yusuke Cc: stable@kernel.org Signed-off-by: Paul Mundt Acked-by: Yoshihiro Shimoda diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 0ceec12..50a3e2d 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -35,7 +35,9 @@ #include #include #include +#include #include +#include #include "../core/hcd.h" #include "r8a66597.h" @@ -820,6 +822,26 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb, enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb); } +static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb, + int status) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_page(virt_to_page(ptr)); + } + + usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb); + spin_unlock(&r8a66597->lock); + usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status); + spin_lock(&r8a66597->lock); +} + /* this function must be called with interrupt disabled */ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address) { @@ -838,15 +860,9 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address) list_del(&td->queue); kfree(td); - if (urb) { - usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), - urb); + if (urb) + r8a66597_urb_done(r8a66597, urb, -ENODEV); - spin_unlock(&r8a66597->lock); - usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, - -ENODEV); - spin_lock(&r8a66597->lock); - } break; } } @@ -1283,10 +1299,7 @@ __releases(r8a66597->lock) __acquires(r8a66597->lock) if (usb_pipeisoc(urb->pipe)) urb->start_frame = r8a66597_get_frame(hcd); - usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb); - spin_unlock(&r8a66597->lock); - usb_hcd_giveback_urb(hcd, urb, status); - spin_lock(&r8a66597->lock); + r8a66597_urb_done(r8a66597, urb, status); } if (restart) { -- cgit v0.10.2 From 2c940db250c1610d95ea5331dc819b8bd4db96ae Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 4 Feb 2010 06:58:28 +0000 Subject: usb: r8a66597-hcd: Fix up spinlock recursion in root hub polling. The current root hub polling code exhibits a spinlock recursion on the private controller lock. r8a66597_root_hub_control() is called from r8a66597_timer() which grabs the lock and disables IRQs. The following chain emerges: r8a66597_timer() <-- lock taken r8a66597_root_hub_control() r8a66597_check_syssts() usb_hcd_poll_rh_status() <-- acquires the same lock /* insert death here */ The entire chain requires IRQs to be disabled, so we just unlock and relock around the call to usb_hcd_poll_rh_status() while leaving the IRQ state unchanged. Signed-off-by: Paul Mundt Acked-by: Yoshihiro Shimoda diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 50a3e2d..bee558ae 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1022,6 +1022,8 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port, /* this function must be called with interrupt disabled */ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, u16 syssts) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) { if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); @@ -1039,7 +1041,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); } + spin_unlock(&r8a66597->lock); usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); + spin_lock(&r8a66597->lock); } /* this function must be called with interrupt disabled */ -- cgit v0.10.2 From a17538f93c16f0e15e35dc31eedad87e2d9c5c26 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 13:41:54 +1000 Subject: drm/radeon/kms: rs400/480 MC setup is different than r300. Boot testing on my rs480 laptop found the MC idle never happened on startup, a quick check with AMD found the idle bit is in a different place on the rs4xx than r300. Implement a new rs400 mc idle function to fix this. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index eeeb0d6..287fceb 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -223,15 +223,31 @@ int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) return 0; } +int rs400_mc_wait_for_idle(struct radeon_device *rdev) +{ + unsigned i; + uint32_t tmp; + + for (i = 0; i < rdev->usec_timeout; i++) { + /* read MC_STATUS */ + tmp = RREG32(0x0150); + if (tmp & (1 << 2)) { + return 0; + } + DRM_UDELAY(1); + } + return -1; +} + void rs400_gpu_init(struct radeon_device *rdev) { /* FIXME: HDP same place on rs400 ? */ r100_hdp_reset(rdev); /* FIXME: is this correct ? */ r420_pipes_init(rdev); - if (r300_mc_wait_for_idle(rdev)) { - printk(KERN_WARNING "Failed to wait MC idle while " - "programming pipes. Bad things might happen.\n"); + if (rs400_mc_wait_for_idle(rdev)) { + printk(KERN_WARNING "rs400: Failed to wait MC idle while " + "programming pipes. Bad things might happen. %08x\n", RREG32(0x150)); } } @@ -370,8 +386,8 @@ void rs400_mc_program(struct radeon_device *rdev) r100_mc_stop(rdev, &save); /* Wait for mc idle */ - if (r300_mc_wait_for_idle(rdev)) - dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n"); + if (rs400_mc_wait_for_idle(rdev)) + dev_warn(rdev->dev, "rs400: Wait MC idle timeout before updating MC.\n"); WREG32(R_000148_MC_FB_LOCATION, S_000148_MC_FB_START(rdev->mc.vram_start >> 16) | S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16)); -- cgit v0.10.2 From 5ff55717674470b96562f931f778c878080755b7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 13:57:03 +1000 Subject: drm/radeon/kms: fix r300 vram width calculations This was incorrect according to the docs and the UMS driver does it like this. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e699e6d..43b55a0 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -506,11 +506,14 @@ void r300_vram_info(struct radeon_device *rdev) /* DDR for all card after R300 & IGP */ rdev->mc.vram_is_ddr = true; + tmp = RREG32(RADEON_MEM_CNTL); - if (tmp & R300_MEM_NUM_CHANNELS_MASK) { - rdev->mc.vram_width = 128; - } else { - rdev->mc.vram_width = 64; + tmp &= R300_MEM_NUM_CHANNELS_MASK; + switch (tmp) { + case 0: rdev->mc.vram_width = 64; break; + case 1: rdev->mc.vram_width = 128; break; + case 2: rdev->mc.vram_width = 256; break; + default: rdev->mc.vram_width = 128; break; } r100_vram_init_sizes(rdev); -- cgit v0.10.2 From 38fd2c6ff526e6a59edfa8e08f6f0724646784c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 28 Jan 2010 18:16:30 +0100 Subject: drm/radeon/kms: suspend and resume audio stuff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes FDO bug #26214 Signed-off-by: Rafał Miłecki Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 9661a46..29faebc 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1950,6 +1950,13 @@ int r600_resume(struct radeon_device *rdev) DRM_ERROR("radeon: failled testing IB (%d).\n", r); return r; } + + r = r600_audio_init(rdev); + if (r) { + DRM_ERROR("radeon: audio resume failed\n"); + return r; + } + return r; } @@ -1957,6 +1964,7 @@ int r600_suspend(struct radeon_device *rdev) { int r; + r600_audio_fini(rdev); /* FIXME: we should wait for ring to be empty */ r600_cp_stop(rdev); rdev->cp.ready = false; diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c index b1c1d34..0dcb690 100644 --- a/drivers/gpu/drm/radeon/r600_audio.c +++ b/drivers/gpu/drm/radeon/r600_audio.c @@ -261,7 +261,6 @@ void r600_audio_fini(struct radeon_device *rdev) if (!r600_audio_chipset_supported(rdev)) return; - WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000); - del_timer(&rdev->audio_timer); + WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000); } -- cgit v0.10.2 From 1eb6dc7dabcb4aa762d96f4f6978f3ef86321d68 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Thu, 4 Feb 2010 22:21:47 +0200 Subject: ALSA: hda - Delay switching to polling mode if an interrupt was missing My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: Maxim Levitsky Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 565de38..d853e2c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -426,6 +426,7 @@ struct azx { /* flags */ int position_fix; + int poll_count; unsigned int running :1; unsigned int initialized :1; unsigned int single_cmd :1; @@ -506,7 +507,7 @@ static char *driver_short_names[] __devinitdata = { #define get_azx_dev(substream) (substream->runtime->private_data) static int azx_acquire_irq(struct azx *chip, int do_disconnect); - +static int azx_send_cmd(struct hda_bus *bus, unsigned int val); /* * Interface for HD codec */ @@ -664,11 +665,12 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, { struct azx *chip = bus->private_data; unsigned long timeout; + int do_poll = 0; again: timeout = jiffies + msecs_to_jiffies(1000); for (;;) { - if (chip->polling_mode) { + if (chip->polling_mode || do_poll) { spin_lock_irq(&chip->reg_lock); azx_update_rirb(chip); spin_unlock_irq(&chip->reg_lock); @@ -676,6 +678,9 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, if (!chip->rirb.cmds[addr]) { smp_rmb(); bus->rirb_error = 0; + + if (!do_poll) + chip->poll_count = 0; return chip->rirb.res[addr]; /* the last value */ } if (time_after(jiffies, timeout)) @@ -688,6 +693,16 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, } } + if (!chip->polling_mode && chip->poll_count < 2) { + snd_printdd(SFX "azx_get_response timeout, " + "polling the codec once: last cmd=0x%08x\n", + chip->last_cmd[addr]); + do_poll = 1; + chip->poll_count++; + goto again; + } + + if (!chip->polling_mode) { snd_printk(KERN_WARNING SFX "azx_get_response timeout, " "switching to polling mode: last cmd=0x%08x\n", -- cgit v0.10.2 From 9492837a6f54b069e13e40e3c89898bb8837a386 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Thu, 4 Feb 2010 22:26:37 +0200 Subject: ALSA: cosmetic: make hda intel interrupt name consistent with others This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index d853e2c..b8faa6d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2058,7 +2058,7 @@ static int azx_acquire_irq(struct azx *chip, int do_disconnect) { if (request_irq(chip->pci->irq, azx_interrupt, chip->msi ? 0 : IRQF_SHARED, - "HDA Intel", chip)) { + "hda_intel", chip)) { printk(KERN_ERR "hda-intel: unable to grab IRQ %d, " "disabling device\n", chip->pci->irq); if (do_disconnect) -- cgit v0.10.2 From 9d4c7464458770d309169f7a7ce1ea6f8a4a7de5 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 5 Feb 2010 10:19:41 +0100 Subject: ALSA: ice1724 - aureon - fix wm8770 volume offset The volume register is from 0..0x7f and 0..0x1a range is mute. Also, fix mute combining in wm_vol_put(). The wrong behaviour was noticed by Peter Christensen. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c index 765d7bd..9e66f6d 100644 --- a/sound/pci/ice1712/aureon.c +++ b/sound/pci/ice1712/aureon.c @@ -703,11 +703,13 @@ static void wm_set_vol(struct snd_ice1712 *ice, unsigned int index, unsigned sho { unsigned char nvol; - if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) + if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) { nvol = 0; - else + } else { nvol = ((vol % WM_VOL_CNT) * (master % WM_VOL_CNT)) / WM_VOL_MAX; + nvol += 0x1b; + } wm_put(ice, index, nvol); wm_put_nocache(ice, index, 0x180 | nvol); @@ -778,7 +780,7 @@ static int wm_master_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_ for (ch = 0; ch < 2; ch++) { unsigned int vol = ucontrol->value.integer.value[ch]; if (vol > WM_VOL_MAX) - continue; + vol = WM_VOL_MAX; vol |= spec->master[ch] & WM_VOL_MUTE; if (vol != spec->master[ch]) { int dac; @@ -834,8 +836,8 @@ static int wm_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value * for (i = 0; i < voices; i++) { unsigned int vol = ucontrol->value.integer.value[i]; if (vol > WM_VOL_MAX) - continue; - vol |= spec->vol[ofs+i]; + vol = WM_VOL_MAX; + vol |= spec->vol[ofs+i] & WM_VOL_MUTE; if (vol != spec->vol[ofs+i]) { spec->vol[ofs+i] = vol; idx = WM_DAC_ATTEN + ofs + i; -- cgit v0.10.2 From ae54abed636d18f7939c965f21ad126001dbe34c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 5 Feb 2010 13:11:45 +0100 Subject: cfq-iosched: split seeky coop queues after one slice Currently we split seeky coop queues after 1s, which is too big. Below patch marks seeky coop queue split_coop flag after one slice. After that, if new requests come in, the queues will be splitted. Patch is suggested by Corrado. Signed-off-by: Shaohua Li Reviewed-by: Corrado Zoccolo Acked-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 17b768d0..023f4e6 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -42,16 +42,13 @@ static const int cfq_hist_divisor = 4; */ #define CFQ_MIN_TT (2) -/* - * Allow merged cfqqs to perform this amount of seeky I/O before - * deciding to break the queues up again. - */ -#define CFQQ_COOP_TOUT (HZ) - #define CFQ_SLICE_SCALE (5) #define CFQ_HW_QUEUE_MIN (5) #define CFQ_SERVICE_SHIFT 12 +#define CFQQ_SEEK_THR 8 * 1024 +#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) + #define RQ_CIC(rq) \ ((struct cfq_io_context *) (rq)->elevator_private) #define RQ_CFQQ(rq) (struct cfq_queue *) ((rq)->elevator_private2) @@ -137,7 +134,6 @@ struct cfq_queue { u64 seek_total; sector_t seek_mean; sector_t last_request_pos; - unsigned long seeky_start; pid_t pid; @@ -314,6 +310,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ CFQ_CFQQ_FLAG_coop, /* cfqq is shared */ + CFQ_CFQQ_FLAG_split_coop, /* shared cfqq will be splitted */ CFQ_CFQQ_FLAG_deep, /* sync cfqq experienced large depth */ CFQ_CFQQ_FLAG_wait_busy, /* Waiting for next request */ }; @@ -342,6 +339,7 @@ CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); CFQ_CFQQ_FNS(coop); +CFQ_CFQQ_FNS(split_coop); CFQ_CFQQ_FNS(deep); CFQ_CFQQ_FNS(wait_busy); #undef CFQ_CFQQ_FNS @@ -1566,6 +1564,15 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq, cfq_clear_cfqq_wait_busy(cfqq); /* + * If this cfqq is shared between multiple processes, check to + * make sure that those processes are still issuing I/Os within + * the mean seek distance. If not, it may be time to break the + * queues apart again. + */ + if (cfq_cfqq_coop(cfqq) && CFQQ_SEEKY(cfqq)) + cfq_mark_cfqq_split_coop(cfqq); + + /* * store what was left of this slice, if the queue idled/timed out */ if (timed_out && !cfq_cfqq_slice_new(cfqq)) { @@ -1663,9 +1670,6 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, return cfqd->last_position - blk_rq_pos(rq); } -#define CFQQ_SEEK_THR 8 * 1024 -#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) - static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct request *rq, bool for_preempt) { @@ -3000,19 +3004,6 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq, total = cfqq->seek_total + (cfqq->seek_samples/2); do_div(total, cfqq->seek_samples); cfqq->seek_mean = (sector_t)total; - - /* - * If this cfqq is shared between multiple processes, check to - * make sure that those processes are still issuing I/Os within - * the mean seek distance. If not, it may be time to break the - * queues apart again. - */ - if (cfq_cfqq_coop(cfqq)) { - if (CFQQ_SEEKY(cfqq) && !cfqq->seeky_start) - cfqq->seeky_start = jiffies; - else if (!CFQQ_SEEKY(cfqq)) - cfqq->seeky_start = 0; - } } /* @@ -3453,14 +3444,6 @@ cfq_merge_cfqqs(struct cfq_data *cfqd, struct cfq_io_context *cic, return cic_to_cfqq(cic, 1); } -static int should_split_cfqq(struct cfq_queue *cfqq) -{ - if (cfqq->seeky_start && - time_after(jiffies, cfqq->seeky_start + CFQQ_COOP_TOUT)) - return 1; - return 0; -} - /* * Returns NULL if a new cfqq should be allocated, or the old cfqq if this * was the last process referring to said cfqq. @@ -3469,9 +3452,9 @@ static struct cfq_queue * split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq) { if (cfqq_process_refs(cfqq) == 1) { - cfqq->seeky_start = 0; cfqq->pid = current->pid; cfq_clear_cfqq_coop(cfqq); + cfq_clear_cfqq_split_coop(cfqq); return cfqq; } @@ -3510,7 +3493,7 @@ new_queue: /* * If the queue was seeky for too long, break it apart. */ - if (cfq_cfqq_coop(cfqq) && should_split_cfqq(cfqq)) { + if (cfq_cfqq_coop(cfqq) && cfq_cfqq_split_coop(cfqq)) { cfq_log_cfqq(cfqd, cfqq, "breaking apart cfqq"); cfqq = split_cfqq(cic, cfqq); if (!cfqq) -- cgit v0.10.2 From 531c2dc70d339c5dfa8c3eb628c3459dc6f3a075 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 5 Feb 2010 13:14:04 +0100 Subject: cciss: Make cciss_seq_show handle holes in the h->drv[] array It is possible (and expected) for there to be holes in the h->drv[] array, that is, some elements may be NULL pointers. cciss_seq_show needs to be made aware of this possibility to avoid an Oops. To reproduce the Oops which this fixes: 1) Create two "arrays" in the Array Configuratino Utility and several logical drives on each array. 2) cat /proc/driver/cciss/cciss* in an infinite loop 3) delete some of the logical drives in the first "array." Signed-off-by: Stephen M. Cameron Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 873e594..9291614 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -337,6 +337,9 @@ static int cciss_seq_show(struct seq_file *seq, void *v) if (*pos > h->highest_lun) return 0; + if (drv == NULL) /* it's possible for h->drv[] to have holes. */ + return 0; + if (drv->heads == 0) return 0; -- cgit v0.10.2 From 3b9447fb7fa1829731290e64ef928d4f6461310a Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Fri, 5 Feb 2010 00:55:33 +0200 Subject: ASoC: pandora: Add APLL supply to fix audio output Pandora's external DAC is using 256*Fs output from the TWL4030 codec, and TWL4030 needs to have APLL enabled for it's 256*Fs output to function. Signed-off-by: Grazvydas Ignotas Acked-by: Peter Ujfalusi Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index 71b2c16..68980c1 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -145,6 +145,7 @@ static const struct snd_soc_dapm_widget omap3pandora_in_dapm_widgets[] = { }; static const struct snd_soc_dapm_route omap3pandora_out_map[] = { + {"PCM DAC", NULL, "APLL Enable"}, {"Headphone Amplifier", NULL, "PCM DAC"}, {"Line Out", NULL, "PCM DAC"}, {"Headphone Jack", NULL, "Headphone Amplifier"}, -- cgit v0.10.2 From 2938429501b73f6aeb312236eac7ed0416a07cd5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 5 Feb 2010 16:09:11 +1100 Subject: percpu: add __percpu for sparse This is to make the annotation of percpu variables during the next merge window less painfull. Extracted from a patch by Rusty Russell. Signed-off-by: Stephen Rothwell Acked-by: Tejun Heo Signed-off-by: Linus Torvalds diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 5be3dab..188fcae 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -15,6 +15,7 @@ # define __acquire(x) __context__(x,1) # define __release(x) __context__(x,-1) # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) +# define __percpu __attribute__((noderef, address_space(3))) extern void __chk_user_ptr(const volatile void __user *); extern void __chk_io_ptr(const volatile void __iomem *); #else @@ -32,6 +33,7 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __acquire(x) (void)0 # define __release(x) (void)0 # define __cond_lock(x,c) (c) +# define __percpu #endif #ifdef __KERNEL__ -- cgit v0.10.2 From 73d2eaac8a3f1ec1d6d0a80ea7302a439ca9b933 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 5 Feb 2010 01:42:43 -0500 Subject: CS5536: apply pci quirk for BIOS SMBUS bug The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon Tested-by: Leigh Porter Tested-by: Jens Rottmann Signed-off-by: Linus Torvalds diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index c746943..d58b940 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -338,6 +338,23 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); +/* + * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS + * ver. 1.33 20070103) don't set the correct ISA PCI region header info. + * BAR0 should be 8 bytes; instead, it may be set to something like 8k + * (which conflicts w/ BAR1's memory range). + */ +static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) +{ + if (pci_resource_len(dev, 0) != 8) { + struct resource *res = &dev->resource[0]; + res->end = res->start + 8 - 1; + dev_info(&dev->dev, "CS5536 ISA bridge bug detected " + "(incorrect header); workaround applied.\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); + static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr, const char *name) { -- cgit v0.10.2 From 1c010ff8912cbc08d80e865aab9c32b6b00c527d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Feb 2010 17:48:13 +0100 Subject: i2c-tiny-usb: Fix on big-endian systems The functionality bit vector is always returned as a little-endian 32-bit number by the device, so it must be byte-swapped to the host endianness. On the other hand, the delay value is handled by the USB stack, so no byte swapping is needed on our side. This fixes bug #15105: http://bugzilla.kernel.org/show_bug.cgi?id=15105 Reported-by: Jens Richter Signed-off-by: Jean Delvare Tested-by: Jens Richter Cc: Till Harbaum Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index b1c050f..e29b6d5 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -13,6 +13,7 @@ #include #include #include +#include /* include interfaces to usb layer */ #include @@ -31,8 +32,8 @@ #define CMD_I2C_IO_END (1<<1) /* i2c bit delay, default is 10us -> 100kHz */ -static int delay = 10; -module_param(delay, int, 0); +static unsigned short delay = 10; +module_param(delay, ushort, 0); MODULE_PARM_DESC(delay, "bit delay in microseconds, " "e.g. 10 for 100kHz (default is 100kHz)"); @@ -109,7 +110,7 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) static u32 usb_func(struct i2c_adapter *adapter) { - u32 func; + __le32 func; /* get functionality from adapter */ if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) != @@ -118,7 +119,7 @@ static u32 usb_func(struct i2c_adapter *adapter) return 0; } - return func; + return le32_to_cpu(func); } /* This is the actual algorithm we define */ @@ -216,8 +217,7 @@ static int i2c_tiny_usb_probe(struct usb_interface *interface, "i2c-tiny-usb at bus %03d device %03d", dev->usb_dev->bus->busnum, dev->usb_dev->devnum); - if (usb_write(&dev->adapter, CMD_SET_DELAY, - cpu_to_le16(delay), 0, NULL, 0) != 0) { + if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) { dev_err(&dev->adapter.dev, "failure setting delay to %dus\n", delay); retval = -EIO; -- cgit v0.10.2 From 15c697ce1c5b408c5e20dcdc6aea2968d1125b75 Mon Sep 17 00:00:00 2001 From: Michael Poole Date: Fri, 5 Feb 2010 12:23:43 -0500 Subject: Bluetooth: Keep a copy of each HID device's report descriptor The report descriptor is read by user space (via the Service Discovery Protocol), so it is only available during the ioctl to connect. However, the HID probe function that needs the descriptor might not be called until a specific module is loaded. Keep a copy of the descriptor so it is available for later use. Signed-off-by: Michael Poole Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 6cf526d..fc6ec1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -703,29 +703,9 @@ static void hidp_close(struct hid_device *hid) static int hidp_parse(struct hid_device *hid) { struct hidp_session *session = hid->driver_data; - struct hidp_connadd_req *req = session->req; - unsigned char *buf; - int ret; - - buf = kmalloc(req->rd_size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (copy_from_user(buf, req->rd_data, req->rd_size)) { - kfree(buf); - return -EFAULT; - } - - ret = hid_parse_report(session->hid, buf, req->rd_size); - - kfree(buf); - - if (ret) - return ret; - - session->req = NULL; - return 0; + return hid_parse_report(session->hid, session->rd_data, + session->rd_size); } static int hidp_start(struct hid_device *hid) @@ -770,12 +750,24 @@ static int hidp_setup_hid(struct hidp_session *session, bdaddr_t src, dst; int err; + session->rd_data = kzalloc(req->rd_size, GFP_KERNEL); + if (!session->rd_data) + return -ENOMEM; + + if (copy_from_user(session->rd_data, req->rd_data, req->rd_size)) { + err = -EFAULT; + goto fault; + } + session->rd_size = req->rd_size; + hid = hid_allocate_device(); - if (IS_ERR(hid)) - return PTR_ERR(hid); + if (IS_ERR(hid)) { + err = PTR_ERR(hid); + goto fault; + } session->hid = hid; - session->req = req; + hid->driver_data = session; baswap(&src, &bt_sk(session->ctrl_sock->sk)->src); @@ -806,6 +798,10 @@ failed: hid_destroy_device(hid); session->hid = NULL; +fault: + kfree(session->rd_data); + session->rd_data = NULL; + return err; } @@ -900,6 +896,9 @@ unlink: session->hid = NULL; } + kfree(session->rd_data); + session->rd_data = NULL; + purge: skb_queue_purge(&session->ctrl_transmit); skb_queue_purge(&session->intr_transmit); diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h index faf3d74..a4e215d 100644 --- a/net/bluetooth/hidp/hidp.h +++ b/net/bluetooth/hidp/hidp.h @@ -154,7 +154,9 @@ struct hidp_session { struct sk_buff_head ctrl_transmit; struct sk_buff_head intr_transmit; - struct hidp_connadd_req *req; + /* Report descriptor */ + __u8 *rd_data; + uint rd_size; }; static inline void hidp_schedule(struct hidp_session *session) -- cgit v0.10.2 From 85f8d3e5faea8bd36c3e5196f8334f7db45e19b2 Mon Sep 17 00:00:00 2001 From: Ray Copeland Date: Fri, 5 Feb 2010 19:58:35 +0100 Subject: hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland Acked-by: "Darrick J. Wong" Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a31e77c..b8156b4 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -179,7 +179,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; * * Some, but not all, of these voltages have low/high limits. */ -#define ADT7462_VOLT_COUNT 12 +#define ADT7462_VOLT_COUNT 13 #define ADT7462_VENDOR 0x41 #define ADT7462_DEVICE 0x62 -- cgit v0.10.2 From 197027e6ef830d60e10f76efc8d12bf3b6c35db5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Feb 2010 19:58:36 +0100 Subject: hwmon: (lm78) Request I/O ports individually for probing Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index cadcbd9..72ff2c4 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -851,17 +851,16 @@ static struct lm78_data *lm78_update_device(struct device *dev) static int __init lm78_isa_found(unsigned short address) { int val, save, found = 0; - - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "lm78")) { - pr_debug("lm78: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "lm78")) { - pr_debug("lm78: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + int port; + + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + LM78_EXTENT; port++) { + if (!request_region(port, 1, "lm78")) { + pr_debug("lm78: Failed to request port 0x%x\n", port); + goto release; + } } #define REALLY_SLOW_IO @@ -925,8 +924,8 @@ static int __init lm78_isa_found(unsigned short address) val & 0x80 ? "LM79" : "LM78", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } -- cgit v0.10.2 From b0bcdd3cd0adb85a7686b396ba50493871b1135c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Feb 2010 19:58:36 +0100 Subject: hwmon: (w83781d) Request I/O ports individually for probing Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 05f9225..32d4ade 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1793,17 +1793,17 @@ static int __init w83781d_isa_found(unsigned short address) { int val, save, found = 0; - - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "w83781d")) { - pr_debug("w83781d: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "w83781d")) { - pr_debug("w83781d: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + int port; + + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + W83781D_EXTENT; port++) { + if (!request_region(port, 1, "w83781d")) { + pr_debug("w83781d: Failed to request port 0x%x\n", + port); + goto release; + } } #define REALLY_SLOW_IO @@ -1877,8 +1877,8 @@ w83781d_isa_found(unsigned short address) val == 0x30 ? "W83782D" : "W83781D", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } -- cgit v0.10.2 From b953df7c70740cd7593072ebec77a8f658505630 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 5 Feb 2010 21:52:37 +0800 Subject: dmaengine: correct onstack wait_queue_head declaration Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by: Yong Zhang Cc: Maciej Sosnowski Cc: Andrew Morton Cc: Nicolas Ferre Signed-off-by: Dan Williams diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 8b90516..948d563 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -467,7 +467,7 @@ err_srcs: if (iterations > 0) while (!kthread_should_stop()) { - DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit); + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit); interruptible_sleep_on(&wait_dmatest_exit); } -- cgit v0.10.2 From bd6b0bf87d8cf3d9cfeadeb12dbf5449e3e50765 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 5 Feb 2010 10:26:27 +0100 Subject: ocfs2: Fix contiguousness check in ocfs2_try_to_merge_extent_map() The wrong member was compared in the continguousness check. Acked-by: Tao Ma Signed-off-by: Roel Kluin Signed-off-by: Joel Becker diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index d35a27f..5328529 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -192,7 +192,7 @@ static int ocfs2_try_to_merge_extent_map(struct ocfs2_extent_map_item *emi, emi->ei_clusters += ins->ei_clusters; return 1; } else if ((ins->ei_phys + ins->ei_clusters) == emi->ei_phys && - (ins->ei_cpos + ins->ei_clusters) == emi->ei_phys && + (ins->ei_cpos + ins->ei_clusters) == emi->ei_cpos && ins->ei_flags == emi->ei_flags) { emi->ei_phys = ins->ei_phys; emi->ei_cpos = ins->ei_cpos; -- cgit v0.10.2 From f12f98dba6ea1517cd7fbb912208893b9c014c15 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 5 Feb 2010 13:14:00 -0500 Subject: cifs: fix length calculation for converted unicode readdir names cifs_from_ucs2 returns the length of the converted name, including the length of the NULL terminator. We don't want to include the NULL terminator in the dentry name length however since that'll throw off the hash calculation for the dentry cache. I believe that this is the root cause of several problems that have cropped up recently that seem to be papered over with the "noserverino" mount option. More confirmation of that would be good, but this is clearly a bug and it fixes at least one reproducible problem that was reported. This patch fixes at least this reproducer in this kernel.org bug: http://bugzilla.kernel.org/show_bug.cgi?id=15088#c12 Reported-by: Bjorn Tore Sund Acked-by: Dave Kleikamp Signed-off-by: Jeff Layton Cc: stable@kernel.org Signed-off-by: Steve French diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index f84062f..f5618f8 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -666,6 +666,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst, min(len, max_len), nlt, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + pqst->len -= nls_nullsize(nlt); } else { pqst->name = filename; pqst->len = len; -- cgit v0.10.2 From 301a6a317797ca362951ea21da397c05236f0070 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 6 Feb 2010 07:08:53 +0000 Subject: [CIFS] Maximum username length check in session setup does not match Fix length check reported by D. Binderman (see below) d binderman wrote: > > I just ran the sourceforge tool cppcheck over the source code of the > new Linux kernel 2.6.33-rc6 > > It said > > [./cifs/sess.c:250]: (error) Buffer access out-of-bounds May turn out to be harmless, but best to be safe. Note max username length is defined to 32 due to Linux (Windows maximum is 20). Signed-off-by: Steve French diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 7085a62..aaa9c1c 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -223,9 +223,9 @@ static void unicode_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, /* null user mount */ *bcc_ptr = 0; *(bcc_ptr+1) = 0; - } else { /* 300 should be long enough for any conceivable user name */ + } else { bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->userName, - 300, nls_cp); + MAX_USERNAME_SIZE, nls_cp); } bcc_ptr += 2 * bytes_ret; bcc_ptr += 2; /* account for null termination */ @@ -246,11 +246,10 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, /* copy user */ if (ses->userName == NULL) { /* BB what about null user mounts - check that we do this BB */ - } else { /* 300 should be long enough for any conceivable user name */ - strncpy(bcc_ptr, ses->userName, 300); + } else { + strncpy(bcc_ptr, ses->userName, MAX_USERNAME_SIZE); } - /* BB improve check for overflow */ - bcc_ptr += strnlen(ses->userName, 300); + bcc_ptr += strnlen(ses->userName, MAX_USERNAME_SIZE); *bcc_ptr = 0; bcc_ptr++; /* account for null termination */ -- cgit v0.10.2 From 6f5a55f1a6c5abee15a0e878e5c74d9f1569b8b0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Feb 2010 16:16:50 -0800 Subject: Fix potential crash with sys_move_pages We incorrectly depended on the 'node_state/node_isset()' functions testing the node range, rather than checking it explicitly. That's not reliable, even if it might often happen to work. So do the proper explicit test. Reported-by: Marcus Meissner Acked-and-tested-by: Brice Goglin Acked-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/migrate.c b/mm/migrate.c index efddbf0..9a0db5b 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -912,6 +912,9 @@ static int do_pages_move(struct mm_struct *mm, struct task_struct *task, goto out_pm; err = -ENODEV; + if (node < 0 || node >= MAX_NUMNODES) + goto out_pm; + if (!node_state(node, N_HIGH_MEMORY)) goto out_pm; -- cgit v0.10.2 From 29275254caedfedce960cfe6df24b90cb04fe431 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 6 Feb 2010 14:17:12 -0800 Subject: Linux 2.6.33-rc7 diff --git a/Makefile b/Makefile index 394aec7..f8e02e9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v0.10.2 From 8dd5ca532c2d2c2b85f16bc038ebfff05b8853e1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 28 Jan 2010 22:11:38 -0500 Subject: befs: fix leak Signed-off-by: Al Viro diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 33baf27..34ddda8 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -873,6 +873,7 @@ befs_fill_super(struct super_block *sb, void *data, int silent) brelse(bh); unacquire_priv_sbp: + kfree(befs_sb->mount_opts.iocharset); kfree(sb->s_fs_info); unacquire_none: -- cgit v0.10.2 From 4b06e5b9ad8abb20105b2b25e42c509ebe9b2d76 Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Fri, 29 Jan 2010 09:56:22 +0900 Subject: freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb Thanks Thomas and Christoph for testing and review. I removed 'smp_wmb()' before up_write from the previous patch, since up_write() should have necessary ordering constraints. (I.e. the change of s_frozen is visible to others after up_write) I'm quite sure the change is harmless but if you are uncomfortable with Tested-by/Reviewed-by on the modified patch, please remove them. If MS_RDONLY, freeze_bdev should just up_write(s_umount) instead of deactivate_locked_super(). Also, keep sb->s_frozen consistent so that remount can check the frozen state. Otherwise a crash reported here can happen: http://lkml.org/lkml/2010/1/16/37 http://lkml.org/lkml/2010/1/28/53 This patch should be applied for 2.6.32 stable series, too. Reviewed-by: Christoph Hellwig Tested-by: Thomas Backlund Signed-off-by: Jun'ichi Nomura Cc: stable@kernel.org Signed-off-by: Al Viro diff --git a/fs/block_dev.c b/fs/block_dev.c index 73d6a73..d11d028 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -246,7 +246,8 @@ struct super_block *freeze_bdev(struct block_device *bdev) if (!sb) goto out; if (sb->s_flags & MS_RDONLY) { - deactivate_locked_super(sb); + sb->s_frozen = SB_FREEZE_TRANS; + up_write(&sb->s_umount); mutex_unlock(&bdev->bd_fsfreeze_mutex); return sb; } @@ -307,7 +308,7 @@ int thaw_bdev(struct block_device *bdev, struct super_block *sb) BUG_ON(sb->s_bdev != bdev); down_write(&sb->s_umount); if (sb->s_flags & MS_RDONLY) - goto out_deactivate; + goto out_unfrozen; if (sb->s_op->unfreeze_fs) { error = sb->s_op->unfreeze_fs(sb); @@ -321,11 +322,11 @@ int thaw_bdev(struct block_device *bdev, struct super_block *sb) } } +out_unfrozen: sb->s_frozen = SB_UNFROZEN; smp_wmb(); wake_up(&sb->s_wait_unfrozen); -out_deactivate: if (sb) deactivate_locked_super(sb); out_unlock: -- cgit v0.10.2 From 1e41568d7378d1ba8c64ba137b9ddd00b59f893a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 26 Jan 2010 05:43:08 -0500 Subject: Take ima_path_check() in nfsd past dentry_open() in nfsd_open() Signed-off-by: Al Viro diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index c194793..325959e 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -752,6 +752,8 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); + host_err = ima_path_check(&(*filp)->f_path, + access & (MAY_READ | MAY_WRITE | MAY_EXEC)); out_nfserr: err = nfserrno(host_err); out: @@ -2127,7 +2129,6 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp, */ path.mnt = exp->ex_path.mnt; path.dentry = dentry; - err = ima_path_check(&path, acc & (MAY_READ | MAY_WRITE | MAY_EXEC)); nfsd_out: return err? nfserrno(err) : 0; } -- cgit v0.10.2 From 8eb988c70e7709b7bd1a69f0ec53d19ac20dea84 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 20 Jan 2010 15:35:41 -0500 Subject: fix ima breakage The "Untangling ima mess, part 2 with counters" patch messed up the counters. Based on conversations with Al Viro, this patch streamlines ima_path_check() by removing the counter maintaince. The counters are now updated independently, from measuring the file, in __dentry_open() and alloc_file() by calling ima_counts_get(). ima_path_check() is called from nfsd and do_filp_open(). It also did not measure all files that should have been measured. Reason: ima_path_check() got bogus value passed as mask. [AV: mea culpa] [AV: add missing nfsd bits] Signed-off-by: Mimi Zohar Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 94a5e60..cd77b63 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1736,8 +1736,7 @@ do_last: if (nd.root.mnt) path_put(&nd.root); if (!IS_ERR(filp)) { - error = ima_path_check(&filp->f_path, filp->f_mode & - (MAY_READ | MAY_WRITE | MAY_EXEC)); + error = ima_path_check(filp, acc_mode); if (error) { fput(filp); filp = ERR_PTR(error); @@ -1797,8 +1796,7 @@ ok: } filp = nameidata_to_filp(&nd); if (!IS_ERR(filp)) { - error = ima_path_check(&filp->f_path, filp->f_mode & - (MAY_READ | MAY_WRITE | MAY_EXEC)); + error = ima_path_check(filp, acc_mode); if (error) { fput(filp); filp = ERR_PTR(error); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 325959e..32477e3 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -752,8 +752,7 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); - host_err = ima_path_check(&(*filp)->f_path, - access & (MAY_READ | MAY_WRITE | MAY_EXEC)); + host_err = ima_path_check(*filp, access); out_nfserr: err = nfserrno(host_err); out: diff --git a/include/linux/ima.h b/include/linux/ima.h index 99dc6d5..aa55a8f 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -17,7 +17,7 @@ struct linux_binprm; extern int ima_bprm_check(struct linux_binprm *bprm); extern int ima_inode_alloc(struct inode *inode); extern void ima_inode_free(struct inode *inode); -extern int ima_path_check(struct path *path, int mask); +extern int ima_path_check(struct file *file, int mask); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); extern void ima_counts_get(struct file *file); @@ -38,7 +38,7 @@ static inline void ima_inode_free(struct inode *inode) return; } -static inline int ima_path_check(struct path *path, int mask) +static inline int ima_path_check(struct file *file, int mask) { return 0; } diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index a89f44d..75aee18 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -84,6 +84,36 @@ out: return found; } +/* ima_read_write_check - reflect possible reading/writing errors in the PCR. + * + * When opening a file for read, if the file is already open for write, + * the file could change, resulting in a file measurement error. + * + * Opening a file for write, if the file is already open for read, results + * in a time of measure, time of use (ToMToU) error. + * + * In either case invalidate the PCR. + */ +enum iint_pcr_error { TOMTOU, OPEN_WRITERS }; +static void ima_read_write_check(enum iint_pcr_error error, + struct ima_iint_cache *iint, + struct inode *inode, + const unsigned char *filename) +{ + switch (error) { + case TOMTOU: + if (iint->readcount > 0) + ima_add_violation(inode, filename, "invalid_pcr", + "ToMToU"); + break; + case OPEN_WRITERS: + if (iint->writecount > 0) + ima_add_violation(inode, filename, "invalid_pcr", + "open_writers"); + break; + } +} + /* * Update the counts given an fmode_t */ @@ -99,6 +129,47 @@ static void ima_inc_counts(struct ima_iint_cache *iint, fmode_t mode) } /* + * ima_counts_get - increment file counts + * + * Maintain read/write counters for all files, but only + * invalidate the PCR for measured files: + * - Opening a file for write when already open for read, + * results in a time of measure, time of use (ToMToU) error. + * - Opening a file for read when already open for write, + * could result in a file measurement error. + * + */ +void ima_counts_get(struct file *file) +{ + struct dentry *dentry = file->f_path.dentry; + struct inode *inode = dentry->d_inode; + fmode_t mode = file->f_mode; + struct ima_iint_cache *iint; + int rc; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return; + iint = ima_iint_find_get(inode); + if (!iint) + return; + mutex_lock(&iint->mutex); + rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK); + if (rc < 0) + goto out; + + if (mode & FMODE_WRITE) { + ima_read_write_check(TOMTOU, iint, inode, dentry->d_name.name); + goto out; + } + ima_read_write_check(OPEN_WRITERS, iint, inode, dentry->d_name.name); +out: + ima_inc_counts(iint, file->f_mode); + mutex_unlock(&iint->mutex); + + kref_put(&iint->refcount, iint_free); +} + +/* * Decrement ima counts */ static void ima_dec_counts(struct ima_iint_cache *iint, struct inode *inode, @@ -153,123 +224,6 @@ void ima_file_free(struct file *file) kref_put(&iint->refcount, iint_free); } -/* ima_read_write_check - reflect possible reading/writing errors in the PCR. - * - * When opening a file for read, if the file is already open for write, - * the file could change, resulting in a file measurement error. - * - * Opening a file for write, if the file is already open for read, results - * in a time of measure, time of use (ToMToU) error. - * - * In either case invalidate the PCR. - */ -enum iint_pcr_error { TOMTOU, OPEN_WRITERS }; -static void ima_read_write_check(enum iint_pcr_error error, - struct ima_iint_cache *iint, - struct inode *inode, - const unsigned char *filename) -{ - switch (error) { - case TOMTOU: - if (iint->readcount > 0) - ima_add_violation(inode, filename, "invalid_pcr", - "ToMToU"); - break; - case OPEN_WRITERS: - if (iint->writecount > 0) - ima_add_violation(inode, filename, "invalid_pcr", - "open_writers"); - break; - } -} - -static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, - const unsigned char *filename) -{ - int rc = 0; - - ima_inc_counts(iint, file->f_mode); - - rc = ima_collect_measurement(iint, file); - if (!rc) - ima_store_measurement(iint, file, filename); - return rc; -} - -/** - * ima_path_check - based on policy, collect/store measurement. - * @path: contains a pointer to the path to be measured - * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE - * - * Measure the file being open for readonly, based on the - * ima_must_measure() policy decision. - * - * Keep read/write counters for all files, but only - * invalidate the PCR for measured files: - * - Opening a file for write when already open for read, - * results in a time of measure, time of use (ToMToU) error. - * - Opening a file for read when already open for write, - * could result in a file measurement error. - * - * Always return 0 and audit dentry_open failures. - * (Return code will be based upon measurement appraisal.) - */ -int ima_path_check(struct path *path, int mask) -{ - struct inode *inode = path->dentry->d_inode; - struct ima_iint_cache *iint; - struct file *file = NULL; - int rc; - - if (!ima_initialized || !S_ISREG(inode->i_mode)) - return 0; - iint = ima_iint_find_get(inode); - if (!iint) - return 0; - - mutex_lock(&iint->mutex); - - rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK); - if (rc < 0) - goto out; - - if ((mask & MAY_WRITE) || (mask == 0)) - ima_read_write_check(TOMTOU, iint, inode, - path->dentry->d_name.name); - - if ((mask & (MAY_WRITE | MAY_READ | MAY_EXEC)) != MAY_READ) - goto out; - - ima_read_write_check(OPEN_WRITERS, iint, inode, - path->dentry->d_name.name); - if (!(iint->flags & IMA_MEASURED)) { - struct dentry *dentry = dget(path->dentry); - struct vfsmount *mnt = mntget(path->mnt); - - file = dentry_open(dentry, mnt, O_RDONLY | O_LARGEFILE, - current_cred()); - if (IS_ERR(file)) { - int audit_info = 0; - - integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, - dentry->d_name.name, - "add_measurement", - "dentry_open failed", - 1, audit_info); - file = NULL; - goto out; - } - rc = get_path_measurement(iint, file, dentry->d_name.name); - } -out: - mutex_unlock(&iint->mutex); - if (file) - fput(file); - kref_put(&iint->refcount, iint_free); - return 0; -} -EXPORT_SYMBOL_GPL(ima_path_check); - static int process_measurement(struct file *file, const unsigned char *filename, int mask, int function) { @@ -297,33 +251,6 @@ out: return rc; } -/* - * ima_counts_get - increment file counts - * - * - for IPC shm and shmat file. - * - for nfsd exported files. - * - * Increment the counts for these files to prevent unnecessary - * imbalance messages. - */ -void ima_counts_get(struct file *file) -{ - struct inode *inode = file->f_dentry->d_inode; - struct ima_iint_cache *iint; - - if (!ima_initialized || !S_ISREG(inode->i_mode)) - return; - iint = ima_iint_find_get(inode); - if (!iint) - return; - mutex_lock(&iint->mutex); - ima_inc_counts(iint, file->f_mode); - mutex_unlock(&iint->mutex); - - kref_put(&iint->refcount, iint_free); -} -EXPORT_SYMBOL_GPL(ima_counts_get); - /** * ima_file_mmap - based on policy, collect/store measurement. * @file: pointer to the file to be measured (May be NULL) @@ -369,6 +296,27 @@ int ima_bprm_check(struct linux_binprm *bprm) return 0; } +/** + * ima_path_check - based on policy, collect/store measurement. + * @file: pointer to the file to be measured + * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE + * + * Measure files based on the ima_must_measure() policy decision. + * + * Always return 0 and audit dentry_open failures. + * (Return code will be based upon measurement appraisal.) + */ +int ima_path_check(struct file *file, int mask) +{ + int rc; + + rc = process_measurement(file, file->f_dentry->d_name.name, + mask & (MAY_READ | MAY_WRITE | MAY_EXEC), + PATH_CHECK); + return 0; +} +EXPORT_SYMBOL_GPL(ima_path_check); + static int __init init_ima(void) { int error; -- cgit v0.10.2 From 54bb6552bd9405dc7685653157a4ec260c77a71c Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 9 Dec 2009 15:29:01 -0500 Subject: ima: initialize ima before inodes can be allocated ima wants to create an inode information struct (iint) when inodes are allocated. This means that at least the part of ima which does this allocation (the allocation is filled with information later) should before any inodes are created. To accomplish this we split the ima initialization routine placing the kmem cache allocator inside a security_initcall() function. Since this makes use of radix trees we also need to make sure that is initialized before security_initcall(). Signed-off-by: Eric Paris Acked-by: Mimi Zohar Signed-off-by: Al Viro diff --git a/init/main.c b/init/main.c index dac44a9..4cb47a1 100644 --- a/init/main.c +++ b/init/main.c @@ -657,9 +657,9 @@ asmlinkage void __init start_kernel(void) proc_caches_init(); buffer_init(); key_init(); + radix_tree_init(); security_init(); vfs_caches_init(totalram_pages); - radix_tree_init(); signals_init(); /* rootfs populating might need page-writeback */ page_writeback_init(); diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index c41afe6..aa25a7e 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -65,7 +65,6 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode, const char *cause, int result, int info); /* Internal IMA function definitions */ -void ima_iintcache_init(void); int ima_init(void); void ima_cleanup(void); int ima_fs_init(void); diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index fa592ff..0d83edc 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -52,9 +52,6 @@ int ima_inode_alloc(struct inode *inode) struct ima_iint_cache *iint = NULL; int rc = 0; - if (!ima_initialized) - return 0; - iint = kmem_cache_alloc(iint_cache, GFP_NOFS); if (!iint) return -ENOMEM; @@ -118,8 +115,6 @@ void ima_inode_free(struct inode *inode) { struct ima_iint_cache *iint; - if (!ima_initialized) - return; spin_lock(&ima_iint_lock); iint = radix_tree_delete(&ima_iint_store, (unsigned long)inode); spin_unlock(&ima_iint_lock); @@ -141,9 +136,11 @@ static void init_once(void *foo) kref_set(&iint->refcount, 1); } -void __init ima_iintcache_init(void) +static int __init ima_iintcache_init(void) { iint_cache = kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0, SLAB_PANIC, init_once); + return 0; } +security_initcall(ima_iintcache_init); diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 75aee18..eb1cf64 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -321,7 +321,6 @@ static int __init init_ima(void) { int error; - ima_iintcache_init(); error = ima_init(); ima_initialized = 1; return error; -- cgit v0.10.2 From 9bbb6cad0173e6220f3ac609e26beb48dab3b7cd Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 26 Jan 2010 17:02:40 -0500 Subject: ima: rename ima_path_check to ima_file_check ima_path_check actually deals with files! call it ima_file_check instead. Signed-off-by: Eric Paris Acked-by: Mimi Zohar Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index cd77b63..d62fdc8 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1736,7 +1736,7 @@ do_last: if (nd.root.mnt) path_put(&nd.root); if (!IS_ERR(filp)) { - error = ima_path_check(filp, acc_mode); + error = ima_file_check(filp, acc_mode); if (error) { fput(filp); filp = ERR_PTR(error); @@ -1796,7 +1796,7 @@ ok: } filp = nameidata_to_filp(&nd); if (!IS_ERR(filp)) { - error = ima_path_check(filp, acc_mode); + error = ima_file_check(filp, acc_mode); if (error) { fput(filp); filp = ERR_PTR(error); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 32477e3..97d79ef 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -752,7 +752,7 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); - host_err = ima_path_check(*filp, access); + host_err = ima_file_check(*filp, access); out_nfserr: err = nfserrno(host_err); out: diff --git a/include/linux/ima.h b/include/linux/ima.h index aa55a8f..975837e 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -17,7 +17,7 @@ struct linux_binprm; extern int ima_bprm_check(struct linux_binprm *bprm); extern int ima_inode_alloc(struct inode *inode); extern void ima_inode_free(struct inode *inode); -extern int ima_path_check(struct file *file, int mask); +extern int ima_file_check(struct file *file, int mask); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); extern void ima_counts_get(struct file *file); @@ -38,7 +38,7 @@ static inline void ima_inode_free(struct inode *inode) return; } -static inline int ima_path_check(struct file *file, int mask) +static inline int ima_file_check(struct file *file, int mask) { return 0; } diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index eb1cf64..b76e1f0 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -14,7 +14,7 @@ * * File: ima_main.c * implements the IMA hooks: ima_bprm_check, ima_file_mmap, - * and ima_path_check. + * and ima_file_check. */ #include #include @@ -306,7 +306,7 @@ int ima_bprm_check(struct linux_binprm *bprm) * Always return 0 and audit dentry_open failures. * (Return code will be based upon measurement appraisal.) */ -int ima_path_check(struct file *file, int mask) +int ima_file_check(struct file *file, int mask) { int rc; @@ -315,7 +315,7 @@ int ima_path_check(struct file *file, int mask) PATH_CHECK); return 0; } -EXPORT_SYMBOL_GPL(ima_path_check); +EXPORT_SYMBOL_GPL(ima_file_check); static int __init init_ima(void) { -- cgit v0.10.2 From 1e93d0052d9a6b3d0b382eedceb18b519d603baf Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 26 Jan 2010 17:02:41 -0500 Subject: ima: rename PATH_CHECK to FILE_CHECK With the movement of the ima hooks functions were renamed from *path* to *file* since they always deal with struct file. This patch renames some of the ima internal flags to make them consistent with the rest of the code. Signed-off-by: Mimi Zohar Signed-off-by: Eric Paris Signed-off-by: Al Viro diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 6434f0d..6cd6dae 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -20,7 +20,7 @@ Description: lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] - base: func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION] + base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK] mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value uid:= decimal value @@ -40,11 +40,11 @@ Description: measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC - measure func=INODE_PERM mask=MAY_READ uid=0 + measure func=FILE_CHECK mask=MAY_READ uid=0 The default policy measures all executables in bprm_check, all files mmapped executable in file_mmap, and all files - open for read by root in inode_permission. + open for read by root in do_filp_open. Examples of LSM specific definitions: @@ -54,8 +54,8 @@ Description: dont_measure obj_type=var_log_t dont_measure obj_type=auditd_log_t - measure subj_user=system_u func=INODE_PERM mask=MAY_READ - measure subj_role=system_r func=INODE_PERM mask=MAY_READ + measure subj_user=system_u func=FILE_CHECK mask=MAY_READ + measure subj_role=system_r func=FILE_CHECK mask=MAY_READ Smack: - measure subj_user=_ func=INODE_PERM mask=MAY_READ + measure subj_user=_ func=FILE_CHECK mask=MAY_READ diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index aa25a7e..47fb65d 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -130,7 +130,7 @@ void iint_free(struct kref *kref); void iint_rcu_free(struct rcu_head *rcu); /* IMA policy related functions */ -enum ima_hooks { PATH_CHECK = 1, FILE_MMAP, BPRM_CHECK }; +enum ima_hooks { FILE_CHECK = 1, FILE_MMAP, BPRM_CHECK }; int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask); void ima_init_policy(void); diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c index 3cd58b6..2a5e0bc 100644 --- a/security/integrity/ima/ima_api.c +++ b/security/integrity/ima/ima_api.c @@ -95,12 +95,12 @@ err_out: * ima_must_measure - measure decision based on policy. * @inode: pointer to inode to measure * @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXECUTE) - * @function: calling function (PATH_CHECK, BPRM_CHECK, FILE_MMAP) + * @function: calling function (FILE_CHECK, BPRM_CHECK, FILE_MMAP) * * The policy is defined in terms of keypairs: * subj=, obj=, type=, func=, mask=, fsmagic= * subj,obj, and type: are LSM specific. - * func: PATH_CHECK | BPRM_CHECK | FILE_MMAP + * func: FILE_CHECK | BPRM_CHECK | FILE_MMAP * mask: contains the permission mask * fsmagic: hex value * diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index b76e1f0..294b005 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -153,7 +153,7 @@ void ima_counts_get(struct file *file) if (!iint) return; mutex_lock(&iint->mutex); - rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK); + rc = ima_must_measure(iint, inode, MAY_READ, FILE_CHECK); if (rc < 0) goto out; @@ -312,7 +312,7 @@ int ima_file_check(struct file *file, int mask) rc = process_measurement(file, file->f_dentry->d_name.name, mask & (MAY_READ | MAY_WRITE | MAY_EXEC), - PATH_CHECK); + FILE_CHECK); return 0; } EXPORT_SYMBOL_GPL(ima_file_check); diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index e127839..4759d0f 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -67,7 +67,7 @@ static struct ima_measure_rule_entry default_rules[] = { .flags = IMA_FUNC | IMA_MASK}, {.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC, .flags = IMA_FUNC | IMA_MASK}, - {.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0, + {.action = MEASURE,.func = FILE_CHECK,.mask = MAY_READ,.uid = 0, .flags = IMA_FUNC | IMA_MASK | IMA_UID}, }; @@ -282,8 +282,11 @@ static int ima_parse_rule(char *rule, struct ima_measure_rule_entry *entry) break; case Opt_func: audit_log_format(ab, "func=%s ", args[0].from); - if (strcmp(args[0].from, "PATH_CHECK") == 0) - entry->func = PATH_CHECK; + if (strcmp(args[0].from, "FILE_CHECK") == 0) + entry->func = FILE_CHECK; + /* PATH_CHECK is for backwards compat */ + else if (strcmp(args[0].from, "PATH_CHECK") == 0) + entry->func = FILE_CHECK; else if (strcmp(args[0].from, "FILE_MMAP") == 0) entry->func = FILE_MMAP; else if (strcmp(args[0].from, "BPRM_CHECK") == 0) -- cgit v0.10.2 From 89068c576bf324ef6fbd50dfc745148f7def202c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 7 Feb 2010 03:07:29 -0500 Subject: Take ima_file_free() to proper place. Hooks: Just Say No. Signed-off-by: Al Viro diff --git a/fs/file_table.c b/fs/file_table.c index 69652c5..b98404b 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -253,6 +253,7 @@ void __fput(struct file *file) if (file->f_op && file->f_op->release) file->f_op->release(inode, file); security_file_free(file); + ima_file_free(file); if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL)) cdev_put(inode->i_cdev); fops_put(file->f_op); diff --git a/security/security.c b/security/security.c index 24e060b..122b748 100644 --- a/security/security.c +++ b/security/security.c @@ -666,8 +666,6 @@ int security_file_alloc(struct file *file) void security_file_free(struct file *file) { security_ops->file_free_security(file); - if (file->f_dentry) - ima_file_free(file); } int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -- cgit v0.10.2 From 80e1e823989ec44d8e35bdfddadbddcffec90424 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 7 Feb 2010 10:11:23 -0800 Subject: Fix race in tty_fasync() properly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 703625118069 ("tty: fix race in tty_fasync") and commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/ restore") that tried to fix up some of the fallout but was incomplete. It turns out that we really cannot hold 'tty->ctrl_lock' over calling __f_setown, because not only did that cause problems with interrupt disables (which the second commit fixed), it also causes a potential ABBA deadlock due to lock ordering. Thanks to Tetsuo Handa for following up on the issue, and running lockdep to show the problem. It goes roughly like this: - f_getown gets filp->f_owner.lock for reading without interrupts disabled, so an interrupt that happens while that lock is held can cause a lockdep chain from f_owner.lock -> sighand->siglock. - at the same time, the tty->ctrl_lock -> f_owner.lock chain that commit 703625118069 introduced, together with the pre-existing sighand->siglock -> tty->ctrl_lock chain means that we have a lock dependency the other way too. So instead of extending tty->ctrl_lock over the whole __f_setown() call, we now just take a reference to the 'pid' structure while holding the lock, and then release it after having done the __f_setown. That still guarantees that 'struct pid' won't go away from under us, which is all we really ever needed. Reported-and-tested-by: Tetsuo Handa Acked-by: Greg Kroah-Hartman Acked-by: Américo Wang Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index c6f3b48..dcb9083 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1951,8 +1951,10 @@ static int tty_fasync(int fd, struct file *filp, int on) pid = task_pid(current); type = PIDTYPE_PID; } - retval = __f_setown(filp, pid, type, 0); + get_pid(pid); spin_unlock_irqrestore(&tty->ctrl_lock, flags); + retval = __f_setown(filp, pid, type, 0); + put_pid(pid); if (retval) goto out; } else { diff --git a/fs/fcntl.c b/fs/fcntl.c index 5ef953e..97e01dc 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -199,9 +199,7 @@ static int setfl(int fd, struct file * filp, unsigned long arg) static void f_modown(struct file *filp, struct pid *pid, enum pid_type type, int force) { - unsigned long flags; - - write_lock_irqsave(&filp->f_owner.lock, flags); + write_lock_irq(&filp->f_owner.lock); if (force || !filp->f_owner.pid) { put_pid(filp->f_owner.pid); filp->f_owner.pid = get_pid(pid); @@ -213,7 +211,7 @@ static void f_modown(struct file *filp, struct pid *pid, enum pid_type type, filp->f_owner.euid = cred->euid; } } - write_unlock_irqrestore(&filp->f_owner.lock, flags); + write_unlock_irq(&filp->f_owner.lock); } int __f_setown(struct file *filp, struct pid *pid, enum pid_type type, -- cgit v0.10.2 From 142698282ceb6811ad3482c218b7292037cb67ff Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 27 Jan 2010 20:05:20 +0000 Subject: sh: Correct the offset of the return address in ret_from_exception The address that ret_from_exception and ret_from_irq will return to is found in the stack slot for SPC, not PR. This error was causing the DWARF unwinder to pick up the wrong return address on the stack and then unwind using the unwind tables for the wrong function. While I'm here I might as well add CFI annotations for the other registers since they could be useful when unwinding. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index f0abd58..2b15ae6 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -70,8 +70,14 @@ ret_from_exception: CFI_STARTPROC simple CFI_DEF_CFA r14, 0 CFI_REL_OFFSET 17, 64 - CFI_REL_OFFSET 15, 0 + CFI_REL_OFFSET 15, 60 CFI_REL_OFFSET 14, 56 + CFI_REL_OFFSET 13, 52 + CFI_REL_OFFSET 12, 48 + CFI_REL_OFFSET 11, 44 + CFI_REL_OFFSET 10, 40 + CFI_REL_OFFSET 9, 36 + CFI_REL_OFFSET 8, 32 preempt_stop() ENTRY(ret_from_irq) ! -- cgit v0.10.2 From 1dca56f13899b9e256f56198026019835aaf9a3a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 27 Jan 2010 20:44:59 +0000 Subject: sh: Setup frame pointer in handle_exception path In order to allow the DWARF unwinder to unwind through exceptions we need to setup the frame pointer register (r14). Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 3f7e2a2..29021bc6 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -365,6 +365,8 @@ handle_exception: mov.l @k2, k2 ! read out vector and keep in k2 handle_exception_special: + setup_frame_reg + ! Setup return address and jump to exception handler mov.l 7f, r9 ! fetch return address stc r2_bank, r0 ! k2 (vector) -- cgit v0.10.2 From 944a3438615da65f11e2559840404a2cac5f65ea Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 30 Jan 2010 17:36:20 +0000 Subject: sh: Don't continue unwinding across interrupts Unfortunately, due to poor DWARF info in current toolchains, unwinding through interrutps cannot be done reliably. The problem is that the DWARF info for function epilogues is wrong. Take this standard epilogue sequence, 80003cc4: e3 6f mov r14,r15 80003cc6: 26 4f lds.l @r15+,pr 80003cc8: f6 6e mov.l @r15+,r14 <---- interrupt here 80003cca: f6 6b mov.l @r15+,r11 80003ccc: f6 6a mov.l @r15+,r10 80003cce: f6 69 mov.l @r15+,r9 80003cd0: 0b 00 rts If we take an interrupt at the highlighted point, the DWARF info will bogusly claim that the return address can be found at some offset from the frame pointer, even though the frame pointer was just restored. The worst part is if the unwinder finds a text address at the bogus stack address - unwinding will continue, for a bit, until it finally comes across an unexpected address on the stack and blows up. The only solution is to stop unwinding once we've calculated the function that was executing when the interrupt occurred. This PC can be easily calculated from pt_regs->pc. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 88d28ec..e511680 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -540,6 +540,8 @@ void dwarf_free_frame(struct dwarf_frame *frame) mempool_free(frame, dwarf_frame_pool); } +extern void ret_from_irq(void); + /** * dwarf_unwind_stack - unwind the stack * @@ -678,6 +680,24 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, addr = frame->cfa + reg->addr; frame->return_addr = __raw_readl(addr); + /* + * Ah, the joys of unwinding through interrupts. + * + * Interrupts are tricky - the DWARF info needs to be _really_ + * accurate and unfortunately I'm seeing a lot of bogus DWARF + * info. For example, I've seen interrupts occur in epilogues + * just after the frame pointer (r14) had been restored. The + * problem was that the DWARF info claimed that the CFA could be + * reached by using the value of the frame pointer before it was + * restored. + * + * So until the compiler can be trusted to produce reliable + * DWARF info when it really matters, let's stop unwinding once + * we've calculated the function that was interrupted. + */ + if (prev && prev->pc == (unsigned long)ret_from_irq) + frame->return_addr = 0; + return frame; bail: -- cgit v0.10.2 From 1af0b2fc676009d9b5b71a82ea6a3c2b20b7ea56 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 30 Jan 2010 17:37:25 +0000 Subject: sh: Remove superfluous setup_frame_reg call There's no need to setup the frame pointer again in call_handle_tlbmiss. The frame pointer will already have been setup in handle_interrupt. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 29021bc6..f6a389c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -132,7 +132,6 @@ ENTRY(tlb_protection_violation_store) mov #1, r5 call_handle_tlbmiss: - setup_frame_reg mov.l 1f, r0 mov r5, r8 mov.l @r0, r6 -- cgit v0.10.2 From 36350e00696df148507246c817cf6f86329479fd Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Sun, 7 Feb 2010 16:45:12 +0000 Subject: powerpc/pseries: Fix kexec regression caused by CPPR tracking The code to track the CPPR values added by commit 49bd3647134ea47420067aea8d1401e722bf2aac ("powerpc/pseries: Track previous CPPR values to correctly EOI interrupts") broke kexec on pseries because the kexec code in xics.c calls xics_set_cpu_priority() before the IPI has been EOI'ed. This wasn't a problem previously but it now triggers a BUG_ON in xics_set_cpu_priority() because os_cppr->index isn't 0. Fix this problem by setting the index on the CPPR stack to 0 before calling xics_set_cpu_priority() in xics_teardown_cpu(). Also make it clear that we only want to set the priority when there's just one CPPR value in the stack, and enforce it by updating the value of os_cppr->stack[0] rather than os_cppr->stack[os_cppr->index]. While we're at it change the BUG_ON to a WARN_ON. Reported-by: Anton Blanchard Signed-off-by: Mark Nelson Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 1ee66db..f5f7919 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -784,9 +784,13 @@ static void xics_set_cpu_priority(unsigned char cppr) { struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); - BUG_ON(os_cppr->index != 0); + /* + * we only really want to set the priority when there's + * just one cppr value on the stack + */ + WARN_ON(os_cppr->index != 0); - os_cppr->stack[os_cppr->index] = cppr; + os_cppr->stack[0] = cppr; if (firmware_has_feature(FW_FEATURE_LPAR)) lpar_cppr_info(cppr); @@ -821,8 +825,14 @@ void xics_setup_cpu(void) void xics_teardown_cpu(void) { + struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); int cpu = smp_processor_id(); + /* + * we have to reset the cppr index to 0 because we're + * not going to return from the IPI + */ + os_cppr->index = 0; xics_set_cpu_priority(0); /* Clear any pending IPI request */ -- cgit v0.10.2 From 1ca137cdcd4e11af03dbe073d48a470b833a456d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 19:02:24 +1000 Subject: drm/radeon/kms: change Kconfig text to reflect the new option. Ingo pointed out that we really don't give the user enough warning to make a decision here. So revise the Kconfig text with a better warning. Acked-by: Ingo Molnar Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig index 5982321..1c02d23 100644 --- a/drivers/gpu/drm/radeon/Kconfig +++ b/drivers/gpu/drm/radeon/Kconfig @@ -1,10 +1,14 @@ config DRM_RADEON_KMS - bool "Enable modesetting on radeon by default" + bool "Enable modesetting on radeon by default - NEW DRIVER" depends on DRM_RADEON help - Choose this option if you want kernel modesetting enabled by default, - and you have a new enough userspace to support this. Running old - userspaces with this enabled will cause pain. + Choose this option if you want kernel modesetting enabled by default. + + This is a completely new driver. It's only part of the existing drm + for compatibility reasons. It requires an entirely different graphics + stack above it and works very differently from the old drm stack. + i.e. don't enable this unless you know what you are doing it may + cause issues or bugs compared to the previous userspace driver stack. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed -- cgit v0.10.2 From a9f0c381973097462d9688dc26fe66f4f020502e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 7 Feb 2010 23:10:04 -0800 Subject: Input: psmouse - make sure we don't schedule reconnects after cleanup Set state of the device as "initializing" during and after cleanup to ensure that unsolicited data from the device is not passed on. We especially want to avoid processing new device announcements "0xaa 0x00" that can come up before we perform reconnect operation. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 9774bdf..d8c0c8d 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1141,7 +1141,14 @@ static void psmouse_cleanup(struct serio *serio) psmouse_deactivate(parent); } - psmouse_deactivate(psmouse); + psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); + + /* + * Disable stream mode so cleanup routine can proceed undisturbed. + */ + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) + printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n", + psmouse->ps2dev.serio->phys); if (psmouse->cleanup) psmouse->cleanup(psmouse); -- cgit v0.10.2 From a6013411118a6c8c34f1bd8b047b36fdf9711590 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 1 Feb 2010 12:15:58 +0100 Subject: microblaze: Invalidate dcache before enabling it We found that on write-trough kernel is necessary to do that invalidation. One WB is possible to use invalidation too. Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 5372b24..bb8c4b9 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -54,6 +54,7 @@ void __init setup_arch(char **cmdline_p) microblaze_cache_init(); + invalidate_dcache(); enable_dcache(); invalidate_icache(); -- cgit v0.10.2 From adefdceef4c1cefee2678724cd57824c8ca80091 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 1 Feb 2010 10:35:22 -0300 Subject: V4L/DVB: Fix the risk of an oops at dvb_dmx_release dvb_dmx_init tries to allocate virtual memory for 2 pointers: filter and feed. If the second vmalloc fails, filter is freed, but the pointer keeps pointing to the old place. Later, when dvb_dmx_release() is called, it will try to free an already freed memory, causing an OOPS. Reviewed-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index b78cfb7..a78408e 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -1246,6 +1246,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux) dvbdemux->feed = vmalloc(dvbdemux->feednum * sizeof(struct dvb_demux_feed)); if (!dvbdemux->feed) { vfree(dvbdemux->filter); + dvbdemux->filter = NULL; return -ENOMEM; } for (i = 0; i < dvbdemux->filternum; i++) { -- cgit v0.10.2 From bc081cc8693800ebb118cc2cc6a859dd0b45921b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 1 Feb 2010 11:50:42 -0300 Subject: V4L/DVB: dvb_demux: Don't use vmalloc at dvb_dmx_swfilter_packet As dvb_dmx_swfilter_packet() is protected by a spinlock, it shouldn't sleep. However, vmalloc() may call sleep. So, move the initialization of dvb_demux::cnt_storage field to a better place. Reviewed-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index a78408e..67f189b 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -426,16 +426,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) }; }; - if (dvb_demux_tscheck) { - if (!demux->cnt_storage) - demux->cnt_storage = vmalloc(MAX_PID + 1); - - if (!demux->cnt_storage) { - printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n"); - dvb_demux_tscheck = 0; - goto no_dvb_demux_tscheck; - } - + if (demux->cnt_storage) { /* check pkt counter */ if (pid < MAX_PID) { if (buf[1] & 0x80) @@ -454,7 +445,6 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) }; /* end check */ }; -no_dvb_demux_tscheck: list_for_each_entry(feed, &demux->feed_list, list_head) { if ((feed->pid != pid) && (feed->pid != 0x2000)) @@ -1258,6 +1248,13 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux) dvbdemux->feed[i].index = i; } + if (dvb_demux_tscheck) { + dvbdemux->cnt_storage = vmalloc(MAX_PID + 1); + + if (!dvbdemux->cnt_storage) + printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n"); + } + INIT_LIST_HEAD(&dvbdemux->frontend_list); for (i = 0; i < DMX_TS_PES_OTHER; i++) { -- cgit v0.10.2 From 691c9ae099b9bcb5c27125af00a4a90120977458 Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Sun, 7 Feb 2010 09:49:58 -0300 Subject: V4L/DVB: dvb-core: fix initialization of feeds list in demux filter A DVB demultiplexer device can be used to set up either a PES filter or a section filter. In the former case, the ts field of the feed union of struct dmxdev_filter is used, in the latter case the sec field of the same union is used. The ts field is a struct list_head, and is currently initialized in the open() method of the demux device. When for a given demuxer a section filter is set up, the sec field is played with, thus if a PES filter needs to be set up after that the ts field will be corrupted, causing a kernel oops. This fix moves the list head initialization to dvb_dmxdev_pes_filter_set(), so that the ts field is properly initialized every time a PES filter is set up. Signed-off-by: Francesco Lavra Cc: stable Reviewed-by: Andy Walls Tested-by: hermann pitton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index c37790a..9ddc579 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -761,7 +761,6 @@ static int dvb_demux_open(struct inode *inode, struct file *file) dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192); dmxdevfilter->type = DMXDEV_TYPE_NONE; dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED); - INIT_LIST_HEAD(&dmxdevfilter->feed.ts); init_timer(&dmxdevfilter->timer); dvbdev->users++; @@ -887,6 +886,7 @@ static int dvb_dmxdev_pes_filter_set(struct dmxdev *dmxdev, dmxdevfilter->type = DMXDEV_TYPE_PES; memcpy(&dmxdevfilter->params, params, sizeof(struct dmx_pes_filter_params)); + INIT_LIST_HEAD(&dmxdevfilter->feed.ts); dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET); -- cgit v0.10.2 From ccd4bb1beb3316de4611de24d223ad761b5a7e95 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 8 Feb 2010 17:39:58 +0000 Subject: [CIFS] Don't cache timestamps on utimes due to coarse granularity force revalidate of the file when any of the timestamps are set since some filesytem types do not have finer granularity timestamps and we can not always detect which file systems round timestamps down to determine whether we can cache the mtime on setattr samba bugzilla 3775 Acked-by: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index cf18ee7..e3fda97 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1762,8 +1762,18 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) CIFS_MOUNT_MAP_SPECIAL_CHR); } - if (!rc) + if (!rc) { rc = inode_setattr(inode, attrs); + + /* force revalidate when any of these times are set since some + of the fs types (eg ext3, fat) do not have fine enough + time granularity to match protocol, and we do not have a + a way (yet) to query the server fs's time granularity (and + whether it rounds times down). + */ + if (!rc && (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME))) + cifsInode->time = 0; + } out: kfree(args); kfree(full_path); -- cgit v0.10.2 From 05507fa2ac8d5e503bcf33ee43329449027d9060 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 5 Feb 2010 13:30:36 -0500 Subject: cifs: fix dentry hash calculation for case-insensitive mounts case-insensitive mounts shouldn't use full_name_hash(). Make sure we use the parent dentry's d_hash routine when one is set. Reported-by: Dave Kleikamp Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index f5618f8..c343b14 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -77,6 +77,11 @@ cifs_readdir_lookup(struct dentry *parent, struct qstr *name, cFYI(1, ("For %s", name->name)); + if (parent->d_op && parent->d_op->d_hash) + parent->d_op->d_hash(parent, name); + else + name->hash = full_name_hash(name->name, name->len); + dentry = d_lookup(parent, name); if (dentry) { /* FIXME: check for inode number changes? */ @@ -671,8 +676,6 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst, pqst->name = filename; pqst->len = len; } - pqst->hash = full_name_hash(pqst->name, pqst->len); -/* cFYI(1, ("filldir on %s",pqst->name)); */ return rc; } -- cgit v0.10.2 From 9edd7ca0a3e3999c260642c92fa008892d82ca6e Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 8 Feb 2010 11:16:26 -0800 Subject: netfilter: nf_conntrack: fix memory corruption with multiple namespaces As discovered by Jon Masters , the "untracked" conntrack, which is located in the data section, might be accidentally freed when a new namespace is instantiated while the untracked conntrack is attached to a skb because the reference count it re-initialized. The best fix would be to use a seperate untracked conntrack per namespace since it includes a namespace pointer. Unfortunately this is not possible without larger changes since the namespace is not easily available everywhere we need it. For now move the untracked conntrack initialization to the init_net setup function to make sure the reference count is not re-initialized and handle cleanup in the init_net cleanup function to make sure namespaces can exit properly while the untracked conntrack is in use in other namespaces. Cc: stable@kernel.org Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 0e98c32..37e2b88 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1113,6 +1113,10 @@ static void nf_ct_release_dying_list(struct net *net) static void nf_conntrack_cleanup_init_net(void) { + /* wait until all references to nf_conntrack_untracked are dropped */ + while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1) + schedule(); + nf_conntrack_helper_fini(); nf_conntrack_proto_fini(); kmem_cache_destroy(nf_conntrack_cachep); @@ -1127,9 +1131,6 @@ static void nf_conntrack_cleanup_net(struct net *net) schedule(); goto i_see_dead_people; } - /* wait until all references to nf_conntrack_untracked are dropped */ - while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1) - schedule(); nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc, nf_conntrack_htable_size); @@ -1288,6 +1289,14 @@ static int nf_conntrack_init_init_net(void) if (ret < 0) goto err_helper; + /* Set up fake conntrack: to never be deleted, not in any hashes */ +#ifdef CONFIG_NET_NS + nf_conntrack_untracked.ct_net = &init_net; +#endif + atomic_set(&nf_conntrack_untracked.ct_general.use, 1); + /* - and look it like as a confirmed connection */ + set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status); + return 0; err_helper: @@ -1333,15 +1342,6 @@ static int nf_conntrack_init_net(struct net *net) if (ret < 0) goto err_ecache; - /* Set up fake conntrack: - - to never be deleted, not in any hashes */ -#ifdef CONFIG_NET_NS - nf_conntrack_untracked.ct_net = &init_net; -#endif - atomic_set(&nf_conntrack_untracked.ct_general.use, 1); - /* - and look it like as a confirmed connection */ - set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status); - return 0; err_ecache: -- cgit v0.10.2 From 5b3501faa8741d50617ce4191c20061c6ef36cb3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 8 Feb 2010 11:16:56 -0800 Subject: netfilter: nf_conntrack: per netns nf_conntrack_cachep nf_conntrack_cachep is currently shared by all netns instances, but because of SLAB_DESTROY_BY_RCU special semantics, this is wrong. If we use a shared slab cache, one object can instantly flight between one hash table (netns ONE) to another one (netns TWO), and concurrent reader (doing a lookup in netns ONE, 'finding' an object of netns TWO) can be fooled without notice, because no RCU grace period has to be observed between object freeing and its reuse. We dont have this problem with UDP/TCP slab caches because TCP/UDP hashtables are global to the machine (and each object has a pointer to its netns). If we use per netns conntrack hash tables, we also *must* use per netns conntrack slab caches, to guarantee an object can not escape from one namespace to another one. Signed-off-by: Eric Dumazet [Patrick: added unique slab name allocation] Cc: stable@kernel.org Signed-off-by: Patrick McHardy diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index ba1ba0c..aed23b6 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -11,6 +11,7 @@ struct nf_conntrack_ecache; struct netns_ct { atomic_t count; unsigned int expect_count; + struct kmem_cache *nf_conntrack_cachep; struct hlist_nulls_head *hash; struct hlist_head *expect_hash; struct hlist_nulls_head unconfirmed; @@ -28,5 +29,6 @@ struct netns_ct { #endif int hash_vmalloc; int expect_vmalloc; + char *slabname; }; #endif diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 37e2b88..9de4bd4 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -63,8 +63,6 @@ EXPORT_SYMBOL_GPL(nf_conntrack_max); struct nf_conn nf_conntrack_untracked __read_mostly; EXPORT_SYMBOL_GPL(nf_conntrack_untracked); -static struct kmem_cache *nf_conntrack_cachep __read_mostly; - static int nf_conntrack_hash_rnd_initted; static unsigned int nf_conntrack_hash_rnd; @@ -572,7 +570,7 @@ struct nf_conn *nf_conntrack_alloc(struct net *net, * Do not use kmem_cache_zalloc(), as this cache uses * SLAB_DESTROY_BY_RCU. */ - ct = kmem_cache_alloc(nf_conntrack_cachep, gfp); + ct = kmem_cache_alloc(net->ct.nf_conntrack_cachep, gfp); if (ct == NULL) { pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n"); atomic_dec(&net->ct.count); @@ -611,7 +609,7 @@ void nf_conntrack_free(struct nf_conn *ct) nf_ct_ext_destroy(ct); atomic_dec(&net->ct.count); nf_ct_ext_free(ct); - kmem_cache_free(nf_conntrack_cachep, ct); + kmem_cache_free(net->ct.nf_conntrack_cachep, ct); } EXPORT_SYMBOL_GPL(nf_conntrack_free); @@ -1119,7 +1117,6 @@ static void nf_conntrack_cleanup_init_net(void) nf_conntrack_helper_fini(); nf_conntrack_proto_fini(); - kmem_cache_destroy(nf_conntrack_cachep); } static void nf_conntrack_cleanup_net(struct net *net) @@ -1137,6 +1134,8 @@ static void nf_conntrack_cleanup_net(struct net *net) nf_conntrack_ecache_fini(net); nf_conntrack_acct_fini(net); nf_conntrack_expect_fini(net); + kmem_cache_destroy(net->ct.nf_conntrack_cachep); + kfree(net->ct.slabname); free_percpu(net->ct.stat); } @@ -1272,15 +1271,6 @@ static int nf_conntrack_init_init_net(void) NF_CONNTRACK_VERSION, nf_conntrack_htable_size, nf_conntrack_max); - nf_conntrack_cachep = kmem_cache_create("nf_conntrack", - sizeof(struct nf_conn), - 0, SLAB_DESTROY_BY_RCU, NULL); - if (!nf_conntrack_cachep) { - printk(KERN_ERR "Unable to create nf_conn slab cache\n"); - ret = -ENOMEM; - goto err_cache; - } - ret = nf_conntrack_proto_init(); if (ret < 0) goto err_proto; @@ -1302,8 +1292,6 @@ static int nf_conntrack_init_init_net(void) err_helper: nf_conntrack_proto_fini(); err_proto: - kmem_cache_destroy(nf_conntrack_cachep); -err_cache: return ret; } @@ -1325,6 +1313,21 @@ static int nf_conntrack_init_net(struct net *net) ret = -ENOMEM; goto err_stat; } + + net->ct.slabname = kasprintf(GFP_KERNEL, "nf_conntrack_%p", net); + if (!net->ct.slabname) { + ret = -ENOMEM; + goto err_slabname; + } + + net->ct.nf_conntrack_cachep = kmem_cache_create(net->ct.slabname, + sizeof(struct nf_conn), 0, + SLAB_DESTROY_BY_RCU, NULL); + if (!net->ct.nf_conntrack_cachep) { + printk(KERN_ERR "Unable to create nf_conn slab cache\n"); + ret = -ENOMEM; + goto err_cache; + } net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size, &net->ct.hash_vmalloc, 1); if (!net->ct.hash) { @@ -1352,6 +1355,10 @@ err_expect: nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc, nf_conntrack_htable_size); err_hash: + kmem_cache_destroy(net->ct.nf_conntrack_cachep); +err_cache: + kfree(net->ct.slabname); +err_slabname: free_percpu(net->ct.stat); err_stat: return ret; -- cgit v0.10.2 From 13ccdfc2af03e09e60791f7d4bc4ccf53398af7c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 8 Feb 2010 11:17:22 -0800 Subject: netfilter: nf_conntrack: restrict runtime expect hashsize modifications Expectation hashtable size was simply glued to a variable with no code to rehash expectations, so it was a bug to allow writing to it. Make "expect_hashsize" readonly. Signed-off-by: Alexey Dobriyan Cc: stable@kernel.org Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index fdf5d2a..4ad7d1d 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -569,7 +569,7 @@ static void exp_proc_remove(struct net *net) #endif /* CONFIG_PROC_FS */ } -module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0600); +module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0400); int nf_conntrack_expect_init(struct net *net) { -- cgit v0.10.2 From 14c7dbe043d01a83a30633ab6b109ba2ac61d9f7 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 8 Feb 2010 11:17:43 -0800 Subject: netfilter: xtables: compat out of scope fix As per C99 6.2.4(2) when temporary table data goes out of scope, the behaviour is undefined: if (compat) { struct foo tmp; ... private = &tmp; } [dereference private] Signed-off-by: Alexey Dobriyan Cc: stable@kernel.org Signed-off-by: Patrick McHardy diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index 0663276..90203e1 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -925,10 +925,10 @@ static int get_info(struct net *net, void __user *user, int *len, int compat) if (t && !IS_ERR(t)) { struct arpt_getinfo info; const struct xt_table_info *private = t->private; - #ifdef CONFIG_COMPAT + struct xt_table_info tmp; + if (compat) { - struct xt_table_info tmp; ret = compat_table_info(private, &tmp); xt_compat_flush_offsets(NFPROTO_ARP); private = &tmp; diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 572330a..3ce53cf 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1132,10 +1132,10 @@ static int get_info(struct net *net, void __user *user, int *len, int compat) if (t && !IS_ERR(t)) { struct ipt_getinfo info; const struct xt_table_info *private = t->private; - #ifdef CONFIG_COMPAT + struct xt_table_info tmp; + if (compat) { - struct xt_table_info tmp; ret = compat_table_info(private, &tmp); xt_compat_flush_offsets(AF_INET); private = &tmp; diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 480d7f8..8a7e0f5 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1164,10 +1164,10 @@ static int get_info(struct net *net, void __user *user, int *len, int compat) if (t && !IS_ERR(t)) { struct ip6t_getinfo info; const struct xt_table_info *private = t->private; - #ifdef CONFIG_COMPAT + struct xt_table_info tmp; + if (compat) { - struct xt_table_info tmp; ret = compat_table_info(private, &tmp); xt_compat_flush_offsets(AF_INET6); private = &tmp; -- cgit v0.10.2 From d696c7bdaa55e2208e56c6f98e6bc1599f34286d Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 8 Feb 2010 11:18:07 -0800 Subject: netfilter: nf_conntrack: fix hash resizing with namespaces As noticed by Jon Masters , the conntrack hash size is global and not per namespace, but modifiable at runtime through /sys/module/nf_conntrack/hashsize. Changing the hash size will only resize the hash in the current namespace however, so other namespaces will use an invalid hash size. This can cause crashes when enlarging the hashsize, or false negative lookups when shrinking it. Move the hash size into the per-namespace data and only use the global hash size to initialize the per-namespace value when instanciating a new namespace. Additionally restrict hash resizing to init_net for now as other namespaces are not handled currently. Cc: stable@kernel.org Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index aed23b6..63d4498 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -11,6 +11,7 @@ struct nf_conntrack_ecache; struct netns_ct { atomic_t count; unsigned int expect_count; + unsigned int htable_size; struct kmem_cache *nf_conntrack_cachep; struct hlist_nulls_head *hash; struct hlist_head *expect_hash; diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 2eb3814..9a4b8b7 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -40,6 +40,7 @@ struct netns_ipv4 { struct xt_table *iptable_security; struct xt_table *nat_table; struct hlist_head *nat_bysource; + unsigned int nat_htable_size; int nat_vmalloced; #endif diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index d171b12..d1ea38a 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -210,7 +210,7 @@ static ctl_table ip_ct_sysctl_table[] = { }, { .procname = "ip_conntrack_buckets", - .data = &nf_conntrack_htable_size, + .data = &init_net.ct.htable_size, .maxlen = sizeof(unsigned int), .mode = 0444, .proc_handler = proc_dointvec, diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c index 8668a3d..2fb7b76 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c @@ -32,7 +32,7 @@ static struct hlist_nulls_node *ct_get_first(struct seq_file *seq) struct hlist_nulls_node *n; for (st->bucket = 0; - st->bucket < nf_conntrack_htable_size; + st->bucket < net->ct.htable_size; st->bucket++) { n = rcu_dereference(net->ct.hash[st->bucket].first); if (!is_a_nulls(n)) @@ -50,7 +50,7 @@ static struct hlist_nulls_node *ct_get_next(struct seq_file *seq, head = rcu_dereference(head->next); while (is_a_nulls(head)) { if (likely(get_nulls_value(head) == st->bucket)) { - if (++st->bucket >= nf_conntrack_htable_size) + if (++st->bucket >= net->ct.htable_size) return NULL; } head = rcu_dereference(net->ct.hash[st->bucket].first); diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index fe1a644..26066a2 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -35,9 +35,6 @@ static DEFINE_SPINLOCK(nf_nat_lock); static struct nf_conntrack_l3proto *l3proto __read_mostly; -/* Calculated at init based on memory size */ -static unsigned int nf_nat_htable_size __read_mostly; - #define MAX_IP_NAT_PROTO 256 static const struct nf_nat_protocol *nf_nat_protos[MAX_IP_NAT_PROTO] __read_mostly; @@ -72,7 +69,7 @@ EXPORT_SYMBOL_GPL(nf_nat_proto_put); /* We keep an extra hash for each conntrack, for fast searching. */ static inline unsigned int -hash_by_src(const struct nf_conntrack_tuple *tuple) +hash_by_src(const struct net *net, const struct nf_conntrack_tuple *tuple) { unsigned int hash; @@ -80,7 +77,7 @@ hash_by_src(const struct nf_conntrack_tuple *tuple) hash = jhash_3words((__force u32)tuple->src.u3.ip, (__force u32)tuple->src.u.all, tuple->dst.protonum, 0); - return ((u64)hash * nf_nat_htable_size) >> 32; + return ((u64)hash * net->ipv4.nat_htable_size) >> 32; } /* Is this tuple already taken? (not by us) */ @@ -147,7 +144,7 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range *range) { - unsigned int h = hash_by_src(tuple); + unsigned int h = hash_by_src(net, tuple); const struct nf_conn_nat *nat; const struct nf_conn *ct; const struct hlist_node *n; @@ -330,7 +327,7 @@ nf_nat_setup_info(struct nf_conn *ct, if (have_to_hash) { unsigned int srchash; - srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + srchash = hash_by_src(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); spin_lock_bh(&nf_nat_lock); /* nf_conntrack_alter_reply might re-allocate exntension aera */ nat = nfct_nat(ct); @@ -679,8 +676,10 @@ nfnetlink_parse_nat_setup(struct nf_conn *ct, static int __net_init nf_nat_net_init(struct net *net) { - net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size, - &net->ipv4.nat_vmalloced, 0); + /* Leave them the same for the moment. */ + net->ipv4.nat_htable_size = net->ct.htable_size; + net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&net->ipv4.nat_htable_size, + &net->ipv4.nat_vmalloced, 0); if (!net->ipv4.nat_bysource) return -ENOMEM; return 0; @@ -703,7 +702,7 @@ static void __net_exit nf_nat_net_exit(struct net *net) nf_ct_iterate_cleanup(net, &clean_nat, NULL); synchronize_rcu(); nf_ct_free_hashtable(net->ipv4.nat_bysource, net->ipv4.nat_vmalloced, - nf_nat_htable_size); + net->ipv4.nat_htable_size); } static struct pernet_operations nf_nat_net_ops = { @@ -724,9 +723,6 @@ static int __init nf_nat_init(void) return ret; } - /* Leave them the same for the moment. */ - nf_nat_htable_size = nf_conntrack_htable_size; - ret = register_pernet_subsys(&nf_nat_net_ops); if (ret < 0) goto cleanup_extend; diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 9de4bd4..4d79e3c 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -84,9 +85,10 @@ static u_int32_t __hash_conntrack(const struct nf_conntrack_tuple *tuple, return ((u64)h * size) >> 32; } -static inline u_int32_t hash_conntrack(const struct nf_conntrack_tuple *tuple) +static inline u_int32_t hash_conntrack(const struct net *net, + const struct nf_conntrack_tuple *tuple) { - return __hash_conntrack(tuple, nf_conntrack_htable_size, + return __hash_conntrack(tuple, net->ct.htable_size, nf_conntrack_hash_rnd); } @@ -294,7 +296,7 @@ __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple) { struct nf_conntrack_tuple_hash *h; struct hlist_nulls_node *n; - unsigned int hash = hash_conntrack(tuple); + unsigned int hash = hash_conntrack(net, tuple); /* Disable BHs the entire time since we normally need to disable them * at least once for the stats anyway. @@ -364,10 +366,11 @@ static void __nf_conntrack_hash_insert(struct nf_conn *ct, void nf_conntrack_hash_insert(struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); unsigned int hash, repl_hash; - hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); - repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple); + hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple); __nf_conntrack_hash_insert(ct, hash, repl_hash); } @@ -395,8 +398,8 @@ __nf_conntrack_confirm(struct sk_buff *skb) if (CTINFO2DIR(ctinfo) != IP_CT_DIR_ORIGINAL) return NF_ACCEPT; - hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); - repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple); + hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple); /* We're not in hash table, and we refuse to set up related connections for unconfirmed conns. But packet copies and @@ -466,7 +469,7 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple, struct net *net = nf_ct_net(ignored_conntrack); struct nf_conntrack_tuple_hash *h; struct hlist_nulls_node *n; - unsigned int hash = hash_conntrack(tuple); + unsigned int hash = hash_conntrack(net, tuple); /* Disable BHs the entire time since we need to disable them at * least once for the stats anyway. @@ -501,7 +504,7 @@ static noinline int early_drop(struct net *net, unsigned int hash) int dropped = 0; rcu_read_lock(); - for (i = 0; i < nf_conntrack_htable_size; i++) { + for (i = 0; i < net->ct.htable_size; i++) { hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[hash], hnnode) { tmp = nf_ct_tuplehash_to_ctrack(h); @@ -521,7 +524,7 @@ static noinline int early_drop(struct net *net, unsigned int hash) if (cnt >= NF_CT_EVICTION_RANGE) break; - hash = (hash + 1) % nf_conntrack_htable_size; + hash = (hash + 1) % net->ct.htable_size; } rcu_read_unlock(); @@ -555,7 +558,7 @@ struct nf_conn *nf_conntrack_alloc(struct net *net, if (nf_conntrack_max && unlikely(atomic_read(&net->ct.count) > nf_conntrack_max)) { - unsigned int hash = hash_conntrack(orig); + unsigned int hash = hash_conntrack(net, orig); if (!early_drop(net, hash)) { atomic_dec(&net->ct.count); if (net_ratelimit()) @@ -1012,7 +1015,7 @@ get_next_corpse(struct net *net, int (*iter)(struct nf_conn *i, void *data), struct hlist_nulls_node *n; spin_lock_bh(&nf_conntrack_lock); - for (; *bucket < nf_conntrack_htable_size; (*bucket)++) { + for (; *bucket < net->ct.htable_size; (*bucket)++) { hlist_nulls_for_each_entry(h, n, &net->ct.hash[*bucket], hnnode) { ct = nf_ct_tuplehash_to_ctrack(h); if (iter(ct, data)) @@ -1130,7 +1133,7 @@ static void nf_conntrack_cleanup_net(struct net *net) } nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc, - nf_conntrack_htable_size); + net->ct.htable_size); nf_conntrack_ecache_fini(net); nf_conntrack_acct_fini(net); nf_conntrack_expect_fini(net); @@ -1190,10 +1193,12 @@ int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp) { int i, bucket, vmalloced, old_vmalloced; unsigned int hashsize, old_size; - int rnd; struct hlist_nulls_head *hash, *old_hash; struct nf_conntrack_tuple_hash *h; + if (current->nsproxy->net_ns != &init_net) + return -EOPNOTSUPP; + /* On boot, we can set this without any fancy locking. */ if (!nf_conntrack_htable_size) return param_set_uint(val, kp); @@ -1206,33 +1211,29 @@ int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp) if (!hash) return -ENOMEM; - /* We have to rehahs for the new table anyway, so we also can - * use a newrandom seed */ - get_random_bytes(&rnd, sizeof(rnd)); - /* Lookups in the old hash might happen in parallel, which means we * might get false negatives during connection lookup. New connections * created because of a false negative won't make it into the hash * though since that required taking the lock. */ spin_lock_bh(&nf_conntrack_lock); - for (i = 0; i < nf_conntrack_htable_size; i++) { + for (i = 0; i < init_net.ct.htable_size; i++) { while (!hlist_nulls_empty(&init_net.ct.hash[i])) { h = hlist_nulls_entry(init_net.ct.hash[i].first, struct nf_conntrack_tuple_hash, hnnode); hlist_nulls_del_rcu(&h->hnnode); - bucket = __hash_conntrack(&h->tuple, hashsize, rnd); + bucket = __hash_conntrack(&h->tuple, hashsize, + nf_conntrack_hash_rnd); hlist_nulls_add_head_rcu(&h->hnnode, &hash[bucket]); } } - old_size = nf_conntrack_htable_size; + old_size = init_net.ct.htable_size; old_vmalloced = init_net.ct.hash_vmalloc; old_hash = init_net.ct.hash; - nf_conntrack_htable_size = hashsize; + init_net.ct.htable_size = nf_conntrack_htable_size = hashsize; init_net.ct.hash_vmalloc = vmalloced; init_net.ct.hash = hash; - nf_conntrack_hash_rnd = rnd; spin_unlock_bh(&nf_conntrack_lock); nf_ct_free_hashtable(old_hash, old_vmalloced, old_size); @@ -1328,7 +1329,9 @@ static int nf_conntrack_init_net(struct net *net) ret = -ENOMEM; goto err_cache; } - net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size, + + net->ct.htable_size = nf_conntrack_htable_size; + net->ct.hash = nf_ct_alloc_hashtable(&net->ct.htable_size, &net->ct.hash_vmalloc, 1); if (!net->ct.hash) { ret = -ENOMEM; @@ -1353,7 +1356,7 @@ err_acct: nf_conntrack_expect_fini(net); err_expect: nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc, - nf_conntrack_htable_size); + net->ct.htable_size); err_hash: kmem_cache_destroy(net->ct.nf_conntrack_cachep); err_cache: diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 4ad7d1d..2f25ff6 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -577,7 +577,7 @@ int nf_conntrack_expect_init(struct net *net) if (net_eq(net, &init_net)) { if (!nf_ct_expect_hsize) { - nf_ct_expect_hsize = nf_conntrack_htable_size / 256; + nf_ct_expect_hsize = net->ct.htable_size / 256; if (!nf_ct_expect_hsize) nf_ct_expect_hsize = 1; } diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 65c2a7b..4b1a56b 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -192,7 +192,7 @@ static void __nf_conntrack_helper_unregister(struct nf_conntrack_helper *me, /* Get rid of expecteds, set helpers to NULL. */ hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode) unhelp(h, me); - for (i = 0; i < nf_conntrack_htable_size; i++) { + for (i = 0; i < net->ct.htable_size; i++) { hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode) unhelp(h, me); } diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 42f21c0..0ffe689 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -594,7 +594,7 @@ ctnetlink_dump_table(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); last = (struct nf_conn *)cb->args[1]; - for (; cb->args[0] < nf_conntrack_htable_size; cb->args[0]++) { + for (; cb->args[0] < init_net.ct.htable_size; cb->args[0]++) { restart: hlist_nulls_for_each_entry_rcu(h, n, &init_net.ct.hash[cb->args[0]], hnnode) { diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 028aba6..e310f15 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -51,7 +51,7 @@ static struct hlist_nulls_node *ct_get_first(struct seq_file *seq) struct hlist_nulls_node *n; for (st->bucket = 0; - st->bucket < nf_conntrack_htable_size; + st->bucket < net->ct.htable_size; st->bucket++) { n = rcu_dereference(net->ct.hash[st->bucket].first); if (!is_a_nulls(n)) @@ -69,7 +69,7 @@ static struct hlist_nulls_node *ct_get_next(struct seq_file *seq, head = rcu_dereference(head->next); while (is_a_nulls(head)) { if (likely(get_nulls_value(head) == st->bucket)) { - if (++st->bucket >= nf_conntrack_htable_size) + if (++st->bucket >= net->ct.htable_size) return NULL; } head = rcu_dereference(net->ct.hash[st->bucket].first); @@ -355,7 +355,7 @@ static ctl_table nf_ct_sysctl_table[] = { }, { .procname = "nf_conntrack_buckets", - .data = &nf_conntrack_htable_size, + .data = &init_net.ct.htable_size, .maxlen = sizeof(unsigned int), .mode = 0444, .proc_handler = proc_dointvec, @@ -421,6 +421,7 @@ static int nf_conntrack_standalone_init_sysctl(struct net *net) goto out_kmemdup; table[1].data = &net->ct.count; + table[2].data = &net->ct.htable_size; table[3].data = &net->ct.sysctl_checksum; table[4].data = &net->ct.sysctl_log_invalid; -- cgit v0.10.2 From 9858ae38011d699d4c2fa7f3493a47accf43a0f5 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 25 Jan 2010 16:20:52 +0530 Subject: [SCSI] mptfusion : mptscsih_abort return value should be SUCCESS instead of value 0. retval should be SUCCESS/FAILED which is defined at scsi.h retval = 0 is directing wrong return value. It must be retval = SUCCESS. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 5775275..81279b3 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1796,7 +1796,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " "Command not in the active list! (sc=%p)\n", ioc->name, SCpnt)); - retval = 0; + retval = SUCCESS; goto out; } -- cgit v0.10.2 From 7dec9cf1dfa283feca4b761160112ea4838a6a8c Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Tue, 26 Jan 2010 17:49:19 +0100 Subject: [SCSI] zfcp: Report FC BSG errors in correct field The status FC_CTELS_STATUS_REJECT for all FC BSG errors is not appropriate. Instead, report -EIO in the result field if there was a problem in zfcp with the FC BSG request. If the request is good from our point of view, report result 0, status FC_CTELS_STATUS_OK and let userspace read the Accept or Reject from the payload (as documented in scsi_bsg_fc.h). Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 0f7b493..271399f 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -671,12 +671,11 @@ static void zfcp_fc_ct_els_job_handler(void *data) { struct fc_bsg_job *job = data; struct zfcp_fsf_ct_els *zfcp_ct_els = job->dd_data; - int status = zfcp_ct_els->status; - int reply_status; + struct fc_bsg_reply *jr = job->reply; - reply_status = status ? FC_CTELS_STATUS_REJECT : FC_CTELS_STATUS_OK; - job->reply->reply_data.ctels_reply.status = reply_status; - job->reply->reply_payload_rcv_len = job->reply_payload.payload_len; + jr->reply_payload_rcv_len = job->reply_payload.payload_len; + jr->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK; + jr->result = zfcp_ct_els->status ? -EIO : 0; job->job_done(job); } -- cgit v0.10.2 From 0f19bc681ed0849a2b95778460a0a8132e3700e2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Fri, 29 Jan 2010 18:09:30 +0800 Subject: [SCSI] qla2xxx: make msix interrupt handler safe for irq Yinghai has reported a lockdep warning on qla2xxx: [ 77.965784] WARNING: at kernel/lockdep.c:2332 trace_hardirqs_on_caller+0xc6/0x14b() [ 77.977492] Hardware name: Sun [ 77.979485] Modules linked in: [ 77.994337] Pid: 0, comm: swapper Not tainted 2.6.33-rc4-tip-yh-03949-g3a8e3f5-dirty #64 [ 78.000120] Call Trace: [ 78.013298] [] warn_slowpath_common+0x7c/0x94 [ 78.017746] [] ? _raw_spin_unlock_irq+0x30/0x36 [ 78.035171] [] warn_slowpath_null+0x14/0x16 [ 78.040152] [] trace_hardirqs_on_caller+0xc6/0x14b [ 78.055400] [] trace_hardirqs_on+0xd/0xf [ 78.058951] [] _raw_spin_unlock_irq+0x30/0x36 [ 78.074889] [] qla24xx_msix_default+0x243/0x281 [ 78.091598] [] ? __lock_release+0xa5/0xae [ 78.096799] [] handle_IRQ_event+0x53/0x113 [ 78.111568] [] handle_edge_irq+0xf3/0x13b [ 78.116255] [] handle_irq+0x24/0x2f [ 78.132063] [] do_IRQ+0x5c/0xc3 [ 78.134684] [] ret_from_intr+0x0/0xf [ 78.137903] [] ? mwait_idle+0xaf/0xbb [ 78.155674] [] ? mwait_idle+0xa6/0xbb [ 78.158600] [] cpu_idle+0x61/0xa1 [ 78.174333] [] rest_init+0x7e/0x80 [ 78.178122] [] start_kernel+0x316/0x31d [ 78.193623] [] x86_64_start_reservations+0xa7/0xab [ 78.198924] [] x86_64_start_kernel+0xe4/0xeb [ 78.214540] ---[ end trace be4529f30a2e4ef5 ]--- This was happened when qla2xxx msix interrupt handler is trying to enable IRQs by spin_unlock_irq(). We should make interrupt handler safe for IRQs, use spin_lock_irqsave/spin_unlock_irqrestore, this will not break the IRQs status in interrupt handler. Reported-by: Yinghai Lu Signed-off-by: Xiaotian Feng Acked-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index ffd0efd..0ced91c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1917,6 +1917,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) struct rsp_que *rsp; struct device_reg_24xx __iomem *reg; struct scsi_qla_host *vha; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1927,7 +1928,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) ha = rsp->hw; reg = &ha->iobase->isp24; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); @@ -1935,7 +1936,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); } - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); return IRQ_HANDLED; } @@ -1946,6 +1947,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_24xx __iomem *reg; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1958,10 +1960,10 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) /* Clear the interrupt, if enabled, for this response queue */ if (rsp->options & ~BIT_6) { reg = &ha->iobase->isp24; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work); @@ -1979,6 +1981,7 @@ qla24xx_msix_default(int irq, void *dev_id) uint32_t stat; uint32_t hccr; uint16_t mb[4]; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1990,7 +1993,7 @@ qla24xx_msix_default(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); do { stat = RD_REG_DWORD(®->host_status); @@ -2039,7 +2042,7 @@ qla24xx_msix_default(int irq, void *dev_id) } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { -- cgit v0.10.2 From 84eb8fb42c120ff32b201c1cdd910033c888f699 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 5 Jan 2010 19:41:44 +0900 Subject: [SCSI] compat_ioct: fix bsg SG_IO bsg's SG_IO doesn't work on 32-bit userspace and 64-bit kernelspace. The problem is that both sg and bsg drivers use SG_IO ioctl. sg_ioctl_trans() does 32/64-bit conversion even against bsg header. It messes up bsg header. bsg driver gets garbage. This patch fixes sg_ioctl_trans to handle only sg header (struct sg_io_hdr). Reported-by: Giridhar Malavali Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index c5c45de..7cbbc7a 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -301,6 +301,12 @@ static int sg_ioctl_trans(unsigned int fd, unsigned int cmd, u32 data; void __user *dxferp; int err; + int interface_id; + + if (get_user(interface_id, &sgio32->interface_id)) + return -EFAULT; + if (interface_id != 'S') + return sys_ioctl(fd, cmd, (unsigned long)sgio32); if (get_user(iovec_count, &sgio32->iovec_count)) return -EFAULT; -- cgit v0.10.2 From a67093d46e3caed1a42d694a7de452b61db30562 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Thu, 4 Feb 2010 14:17:59 -0800 Subject: [SCSI] qla2xxx: Obtain proper host structure during response-queue processing. Original code incorrectly assumed only status-type-0 IOCBs would be queued to the response-queue, and thus all entries would safely reference a VHA from the IOCB 'handle.' Cc: stable@kernel.org Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f61fb8d..8bc6f53 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -453,6 +453,5 @@ extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); -extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *); #endif /* _QLA_GBL_H */ diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0ced91c..6fc63b9 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1930,7 +1930,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) spin_lock_irqsave(&ha->hardware_lock, flags); - vha = qla25xx_get_host(rsp); + vha = pci_get_drvdata(ha->pdev); qla24xx_process_response_queue(vha, rsp); if (!ha->flags.disable_msix_handshake) { WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); @@ -2280,30 +2280,3 @@ int qla25xx_request_irq(struct rsp_que *rsp) msix->rsp = rsp; return ret; } - -struct scsi_qla_host * -qla25xx_get_host(struct rsp_que *rsp) -{ - srb_t *sp; - struct qla_hw_data *ha = rsp->hw; - struct scsi_qla_host *vha = NULL; - struct sts_entry_24xx *pkt; - struct req_que *req; - uint16_t que; - uint32_t handle; - - pkt = (struct sts_entry_24xx *) rsp->ring_ptr; - que = MSW(pkt->handle); - handle = (uint32_t) LSW(pkt->handle); - req = ha->req_q_map[que]; - if (handle < MAX_OUTSTANDING_COMMANDS) { - sp = req->outstanding_cmds[handle]; - if (sp) - return sp->fcport->vha; - else - goto base_que; - } -base_que: - vha = pci_get_drvdata(ha->pdev); - return vha; -} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index b901aa2..ff17dee 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -636,13 +636,15 @@ failed: static void qla_do_work(struct work_struct *work) { + unsigned long flags; struct rsp_que *rsp = container_of(work, struct rsp_que, q_work); struct scsi_qla_host *vha; + struct qla_hw_data *ha = rsp->hw; - spin_lock_irq(&rsp->hw->hardware_lock); - vha = qla25xx_get_host(rsp); + spin_lock_irqsave(&rsp->hw->hardware_lock, flags); + vha = pci_get_drvdata(ha->pdev); qla24xx_process_response_queue(vha, rsp); - spin_unlock_irq(&rsp->hw->hardware_lock); + spin_unlock_irqrestore(&rsp->hw->hardware_lock, flags); } /* create response queue */ -- cgit v0.10.2 From 562ada612058133a5483c68a73605f3c5f42fffe Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Fri, 15 Jan 2010 18:54:03 -0600 Subject: net/9p: fix virtio transport to correctly update status on connect The 9p virtio transport was not updating its connection status correctly preventing it from being able to mount the server. Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index ea1e3da..67c4bc7 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -311,6 +311,7 @@ p9_virtio_create(struct p9_client *client, const char *devname, char *args) } client->trans = (void *)chan; + client->status = Connected; chan->client = client; return 0; -- cgit v0.10.2 From 349d3bb878d71978650a0634b5445af3c1cc1cd8 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Fri, 15 Jan 2010 19:01:10 -0600 Subject: net/9p: fail when user specifies a transport which we can't find If the user specifies a transport and we can't find it, we failed back to the default trainsport silently. This patch will make the code complain more loudly and return an error code. Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index 8af95b2..90a2eb9 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -108,6 +108,13 @@ static int parse_opts(char *opts, struct p9_client *clnt) break; case Opt_trans: clnt->trans_mod = v9fs_get_trans_by_name(&args[0]); + if(clnt->trans_mod == NULL) { + P9_DPRINTK(P9_DEBUG_ERROR, + "Could not find request transport: %s\n", + (char *) &args[0]); + ret = -EINVAL; + goto free_and_return; + } break; case Opt_legacy: clnt->dotu = 0; @@ -117,6 +124,7 @@ static int parse_opts(char *opts, struct p9_client *clnt) } } +free_and_return: kfree(options); return ret; } -- cgit v0.10.2 From 9d6939dac77102b09396ee0b89392ec7639612a7 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Fri, 15 Jan 2010 19:01:56 -0600 Subject: net/9p: fix statsize inside twstat stat structures contain a size prefix. In our twstat messages we were including the size of the size prefix in the prefix, which is not what the protocol wants, and Inferno servers would complain. Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index 90a2eb9..a2e2d61 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -1222,10 +1222,11 @@ static int p9_client_statsize(struct p9_wstat *wst, int optional) { int ret; + /* NOTE: size shouldn't include its own length */ /* size[2] type[2] dev[4] qid[13] */ /* mode[4] atime[4] mtime[4] length[8]*/ /* name[s] uid[s] gid[s] muid[s] */ - ret = 2+2+4+13+4+4+4+8+2+2+2+2; + ret = 2+4+13+4+4+4+8+2+2+2+2; if (wst->name) ret += strlen(wst->name); @@ -1266,7 +1267,7 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); - req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst); + req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size+2, wst); if (IS_ERR(req)) { err = PTR_ERR(req); goto error; -- cgit v0.10.2 From 260c64d23532caf19abb77e696971da05c388489 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 8 Feb 2010 13:42:26 -0500 Subject: Revert "nfsd4: fix error return when pseudoroot missing" Commit f39bde24b275ddc45d fixed the error return from PUTROOTFH in the case where there is no pseudofilesystem. This is really a case we shouldn't hit on a correctly configured server: in the absence of a root filehandle, there's no point accepting version 4 NFS rpc calls at all. But the shared responsibility between kernel and userspace here means the kernel on its own can't eliminate the possiblity of this happening. And we have indeed gotten this wrong in distro's, so new client-side mount code that attempts to negotiate v4 by default first has to work around this case. Therefore when commit f39bde24b275ddc45d arrived at roughly the same time as the new v4-default mount code, which explicitly checked only for the previous error, the result was previously fine mounts suddenly failing. We'll fix both sides for now: revert the error change, and make the client-side mount workaround more robust. Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c index c487810..a0c4016 100644 --- a/fs/nfsd/export.c +++ b/fs/nfsd/export.c @@ -1316,19 +1316,11 @@ rqst_exp_parent(struct svc_rqst *rqstp, struct path *path) static struct svc_export *find_fsidzero_export(struct svc_rqst *rqstp) { - struct svc_export *exp; u32 fsidv[2]; mk_fsid(FSID_NUM, fsidv, 0, 0, 0, NULL); - exp = rqst_exp_find(rqstp, FSID_NUM, fsidv); - /* - * We shouldn't have accepting an nfsv4 request at all if we - * don't have a pseudoexport!: - */ - if (IS_ERR(exp) && PTR_ERR(exp) == -ENOENT) - exp = ERR_PTR(-ESERVERFAULT); - return exp; + return rqst_exp_find(rqstp, FSID_NUM, fsidv); } /* -- cgit v0.10.2 From 86a06abab0ffbb9d8ce2b7f6b6652412ce2d2c36 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Fri, 5 Feb 2010 17:55:56 -0800 Subject: ocfs2/dlm: Fix printing of lockname The debug call printing the name of the lock resource was chopping off the last character. This patch fixes the problem. Signed-off-by: Sunil Mushran Acked-by: Mark Fasheh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c index 42b0bad..0cd24cf 100644 --- a/fs/ocfs2/dlm/dlmdebug.c +++ b/fs/ocfs2/dlm/dlmdebug.c @@ -102,7 +102,7 @@ void __dlm_print_one_lock_resource(struct dlm_lock_resource *res) assert_spin_locked(&res->spinlock); stringify_lockname(res->lockname.name, res->lockname.len, - buf, sizeof(buf) - 1); + buf, sizeof(buf)); printk("lockres: %s, owner=%u, state=%u\n", buf, res->owner, res->state); printk(" last used: %lu, refcnt: %u, on purge list: %s\n", -- cgit v0.10.2 From 6efd806634f7526f723f3aa7ceffd3887a932d9c Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Fri, 5 Feb 2010 15:41:23 -0800 Subject: ocfs2/cluster: Make o2net connect messages KERN_NOTICE Connect and disconnect messages are more than informational as they are required during root cause analysis for failures. This patch changes them from KERN_INFO to KERN_NOTICE. Signed-off-by: Sunil Mushran Acked-by: Mark Faseh Signed-off-by: Joel Becker diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 938ba18..d8d0c65 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -485,7 +485,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, } if (was_valid && !valid) { - printk(KERN_INFO "o2net: no longer connected to " + printk(KERN_NOTICE "o2net: no longer connected to " SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc)); o2net_complete_nodes_nsw(nn); } @@ -493,7 +493,7 @@ static void o2net_set_nn_state(struct o2net_node *nn, if (!was_valid && valid) { o2quo_conn_up(o2net_num_from_nn(nn)); cancel_delayed_work(&nn->nn_connect_expired); - printk(KERN_INFO "o2net: %s " SC_NODEF_FMT "\n", + printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n", o2nm_this_node() > sc->sc_node->nd_num ? "connected to" : "accepted connection from", SC_NODEF_ARGS(sc)); @@ -1476,7 +1476,7 @@ static void o2net_idle_timer(unsigned long data) do_gettimeofday(&now); - printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u " + printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u " "seconds, shutting it down.\n", SC_NODEF_ARGS(sc), o2net_idle_timeout() / 1000, o2net_idle_timeout() % 1000); -- cgit v0.10.2 From 0da780c269957783d341fc3559e6b4c9912af7b4 Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Fri, 5 Feb 2010 01:21:03 +0100 Subject: mac80211: Fix probe request filtering in IBSS mode We only reply to probe request if either the requested SSID is the broadcast SSID or if the requested SSID matches our own SSID. This latter case was not properly handled since we were replying to different SSID with the same length as our own SSID. Signed-off-by: Benoit Papillault Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 1f2db64..22f0c2a 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -647,7 +647,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, } if (pos[1] != 0 && (pos[1] != ifibss->ssid_len || - !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) { + memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) { /* Ignore ProbeReq for foreign SSID */ return; } -- cgit v0.10.2 From 098dfded5b1b09927995e89c6d689f85a0f53384 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 5 Feb 2010 11:40:00 -0800 Subject: iwlwifi: Fix to set correct ht configuration iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 5461f10..d10bea6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2744,6 +2744,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) priv->staging_rxon.flags = 0; + iwl_set_rxon_ht(priv, ht_conf); iwl_set_rxon_channel(priv, conf->channel); iwl_set_flags_for_band(priv, conf->channel->band); -- cgit v0.10.2 From c0ce77b8323c1a0d4eeef97caf16c0ea971222a9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 3 Feb 2010 10:22:31 +0100 Subject: mac80211: fix deferred hardware scan requests Reinette found the reason for the warnings that happened occasionally when a hw-offloaded scan finished; her description of the problem: mac80211 will defer the handling of scan requests if it is busy with management work at the time. The scan requests are deferred and run after the work has completed. When this occurs there are currently two problems. * The scan request for hardware scan is not fully populated with the band and channels to scan not initialized. * When the scan is queued the state is not correctly updated to reflect that a scan is in progress. The problem here is that when the driver completes the scan and calls ieee80211_scan_completed() a warning will be triggered since mac80211 was not aware that a scan was in progress. The reason is that the queued scan work will start the hw scan right away when the hw_scan_req struct has already been allocated. However, in the first pass it will not have been filled, which happens at the same time as setting the bits. To fix this, simply move the allocation after the pending work test as well, so that the first iteration of the scan work will call __ieee80211_start_scan() even in the hardware scan case. Bug-identified-by: Reinette Chatre Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f934c96..bc17cf7 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -439,6 +439,16 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->scan_req) return -EBUSY; + if (req != local->int_scan_req && + sdata->vif.type == NL80211_IFTYPE_STATION && + !list_empty(&ifmgd->work_list)) { + /* actually wait for the work it's doing to finish/time out */ + set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); + local->scan_req = req; + local->scan_sdata = sdata; + return 0; + } + if (local->ops->hw_scan) { u8 *ies; @@ -463,14 +473,6 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, local->scan_req = req; local->scan_sdata = sdata; - if (req != local->int_scan_req && - sdata->vif.type == NL80211_IFTYPE_STATION && - !list_empty(&ifmgd->work_list)) { - /* actually wait for the work it's doing to finish/time out */ - set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); - return 0; - } - if (local->ops->hw_scan) __set_bit(SCAN_HW_SCANNING, &local->scanning); else -- cgit v0.10.2 From 7a4439c406c21b1e900ed497cec1a79d05b38c07 Mon Sep 17 00:00:00 2001 From: "M. Mohan Kumar" Date: Mon, 8 Feb 2010 15:36:48 -0600 Subject: 9p: Include fsync support for 9p client Implement the fsync in the client side by marking stat field values to 'don't touch' so that server may interpret it as a request to guarantee that the contents of the associated file are committed to stable storage before the Rwstat message is returned. Without this patch, calling fsync on a 9p file results in "Invalid argument" error. Please check the attached C program. Signed-off-by: Aneesh Kumar K.V Signed-off-by: M. Mohan Kumar Acked-by: Venkateswararao Jujjuri (JV) Signed-off-by: Eric Van Hensbergen diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h index 3a7560e..ed83583 100644 --- a/fs/9p/v9fs_vfs.h +++ b/fs/9p/v9fs_vfs.h @@ -60,3 +60,4 @@ void v9fs_dentry_release(struct dentry *); int v9fs_uflags2omode(int uflags, int extended); ssize_t v9fs_file_readn(struct file *, char *, char __user *, u32, u64); +void v9fs_blank_wstat(struct p9_wstat *wstat); diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 3902bf4..74a0461 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -257,6 +257,23 @@ v9fs_file_write(struct file *filp, const char __user * data, return total; } +static int v9fs_file_fsync(struct file *filp, struct dentry *dentry, + int datasync) +{ + struct p9_fid *fid; + struct p9_wstat wstat; + int retval; + + P9_DPRINTK(P9_DEBUG_VFS, "filp %p dentry %p datasync %x\n", filp, + dentry, datasync); + + fid = filp->private_data; + v9fs_blank_wstat(&wstat); + + retval = p9_client_wstat(fid, &wstat); + return retval; +} + static const struct file_operations v9fs_cached_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, @@ -266,6 +283,7 @@ static const struct file_operations v9fs_cached_file_operations = { .release = v9fs_dir_release, .lock = v9fs_file_lock, .mmap = generic_file_readonly_mmap, + .fsync = v9fs_file_fsync, }; const struct file_operations v9fs_file_operations = { @@ -276,4 +294,5 @@ const struct file_operations v9fs_file_operations = { .release = v9fs_dir_release, .lock = v9fs_file_lock, .mmap = generic_file_readonly_mmap, + .fsync = v9fs_file_fsync, }; diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 9d03d1e..a407fa3 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -176,7 +176,7 @@ int v9fs_uflags2omode(int uflags, int extended) * */ -static void +void v9fs_blank_wstat(struct p9_wstat *wstat) { wstat->type = ~0; -- cgit v0.10.2 From d8c8a9e36560e9ff4c99279d64ce5dd0e1a33fa6 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 8 Feb 2010 16:23:23 -0600 Subject: 9p: fix option parsing Options pointer is being moved before calling kfree() which seems to cause problems. This uses a separate pointer to track and free original allocation. Signed-off-by: Venkateswararao Jujjuri Signed-off-by: Eric Van Hensbergen w diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index cf62b05..6848788 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -84,7 +84,7 @@ static const match_table_t tokens = { static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) { - char *options; + char *options, *tmp_options; substring_t args[MAX_OPT_ARGS]; char *p; int option = 0; @@ -102,9 +102,10 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) if (!opts) return 0; - options = kstrdup(opts, GFP_KERNEL); - if (!options) + tmp_options = kstrdup(opts, GFP_KERNEL); + if (!tmp_options) goto fail_option_alloc; + options = tmp_options; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -194,7 +195,8 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) continue; } } - kfree(options); + + kfree(tmp_options); return ret; fail_option_alloc: diff --git a/net/9p/client.c b/net/9p/client.c index a2e2d61..cbe0669 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -69,7 +69,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...); static int parse_opts(char *opts, struct p9_client *clnt) { - char *options; + char *options, *tmp_options; char *p; substring_t args[MAX_OPT_ARGS]; int option; @@ -81,12 +81,13 @@ static int parse_opts(char *opts, struct p9_client *clnt) if (!opts) return 0; - options = kstrdup(opts, GFP_KERNEL); - if (!options) { + tmp_options = kstrdup(opts, GFP_KERNEL); + if (!tmp_options) { P9_DPRINTK(P9_DEBUG_ERROR, "failed to allocate copy of option string\n"); return -ENOMEM; } + options = tmp_options; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -125,7 +126,7 @@ static int parse_opts(char *opts, struct p9_client *clnt) } free_and_return: - kfree(options); + kfree(tmp_options); return ret; } diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index be1cb90..31d0b05 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -714,7 +714,7 @@ static int parse_opts(char *params, struct p9_fd_opts *opts) char *p; substring_t args[MAX_OPT_ARGS]; int option; - char *options; + char *options, *tmp_options; int ret; opts->port = P9_PORT; @@ -724,12 +724,13 @@ static int parse_opts(char *params, struct p9_fd_opts *opts) if (!params) return 0; - options = kstrdup(params, GFP_KERNEL); - if (!options) { + tmp_options = kstrdup(params, GFP_KERNEL); + if (!tmp_options) { P9_DPRINTK(P9_DEBUG_ERROR, "failed to allocate copy of option string\n"); return -ENOMEM; } + options = tmp_options; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -760,7 +761,8 @@ static int parse_opts(char *params, struct p9_fd_opts *opts) continue; } } - kfree(options); + + kfree(tmp_options); return 0; } diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 65cb29d..2c95a89 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -166,7 +166,7 @@ static int parse_opts(char *params, struct p9_rdma_opts *opts) char *p; substring_t args[MAX_OPT_ARGS]; int option; - char *options; + char *options, *tmp_options; int ret; opts->port = P9_PORT; @@ -177,12 +177,13 @@ static int parse_opts(char *params, struct p9_rdma_opts *opts) if (!params) return 0; - options = kstrdup(params, GFP_KERNEL); - if (!options) { + tmp_options = kstrdup(params, GFP_KERNEL); + if (!tmp_options) { P9_DPRINTK(P9_DEBUG_ERROR, "failed to allocate copy of option string\n"); return -ENOMEM; } + options = tmp_options; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -216,7 +217,7 @@ static int parse_opts(char *params, struct p9_rdma_opts *opts) } /* RQ must be at least as large as the SQ */ opts->rq_depth = max(opts->rq_depth, opts->sq_depth); - kfree(options); + kfree(tmp_options); return 0; } -- cgit v0.10.2 From 4b9d2a2112163a757943c78ea98587fc9e828641 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 8 Feb 2010 13:16:55 +1000 Subject: drm/radeon/kms: don't crash if no DDC bus on VGA/DVI connector. This is strange - like really really strange, twilight zone of strange. VGA ports have DDC buses, but sometimes for some reasons the BIOS says we don't and we oops - AMD mentioned bios bugs so we'll have to add quirks. reported on irc by nirbheek and https://bugzilla.redhat.com/show_bug.cgi?id=554323 Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 2d8e5a7..2381885 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -580,16 +580,18 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder; struct drm_encoder_helper_funcs *encoder_funcs; - bool dret; + bool dret = false; enum drm_connector_status ret = connector_status_disconnected; encoder = radeon_best_single_encoder(connector); if (!encoder) ret = connector_status_disconnected; - radeon_i2c_do_lock(radeon_connector->ddc_bus, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector->ddc_bus, 0); + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector->ddc_bus, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector->ddc_bus, 0); + } if (dret) { if (radeon_connector->edid) { kfree(radeon_connector->edid); @@ -740,11 +742,13 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect struct drm_mode_object *obj; int i; enum drm_connector_status ret = connector_status_disconnected; - bool dret; + bool dret = false; - radeon_i2c_do_lock(radeon_connector->ddc_bus, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector->ddc_bus, 0); + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector->ddc_bus, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector->ddc_bus, 0); + } if (dret) { if (radeon_connector->edid) { kfree(radeon_connector->edid); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 6a92f99..7e17a36 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -278,7 +278,7 @@ static void radeon_print_display_setup(struct drm_device *dev) DRM_INFO(" %s\n", connector_names[connector->connector_type]); if (radeon_connector->hpd.hpd != RADEON_HPD_NONE) DRM_INFO(" %s\n", hpd_names[radeon_connector->hpd.hpd]); - if (radeon_connector->ddc_bus) + if (radeon_connector->ddc_bus) { DRM_INFO(" DDC: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", radeon_connector->ddc_bus->rec.mask_clk_reg, radeon_connector->ddc_bus->rec.mask_data_reg, @@ -288,6 +288,15 @@ static void radeon_print_display_setup(struct drm_device *dev) radeon_connector->ddc_bus->rec.en_data_reg, radeon_connector->ddc_bus->rec.y_clk_reg, radeon_connector->ddc_bus->rec.y_data_reg); + } else { + if (connector->connector_type == DRM_MODE_CONNECTOR_VGA || + connector->connector_type == DRM_MODE_CONNECTOR_DVII || + connector->connector_type == DRM_MODE_CONNECTOR_DVID || + connector->connector_type == DRM_MODE_CONNECTOR_DVIA || + connector->connector_type == DRM_MODE_CONNECTOR_HDMIA || + connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) + DRM_INFO(" DDC: no ddc bus - possible BIOS bug - please report to xorg-driver-ati@lists.x.org\n"); + } DRM_INFO(" Encoders:\n"); list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { radeon_encoder = to_radeon_encoder(encoder); -- cgit v0.10.2 From 2fc1b5dd99f66d93ffc23fd8df82d384c1a354c8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 8 Feb 2010 15:00:39 -0800 Subject: dst: call cond_resched() in dst_gc_task() Kernel bugzilla #15239 On some workloads, it is quite possible to get a huge dst list to process in dst_gc_task(), and trigger soft lockup detection. Fix is to call cond_resched(), as we run in process context. Reported-by: Pawel Staszewski Tested-by: Pawel Staszewski Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dst.c b/net/core/dst.c index 57bc4d5..cb1b348 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -79,6 +80,7 @@ loop: while ((dst = next) != NULL) { next = dst->next; prefetch(&next->next); + cond_resched(); if (likely(atomic_read(&dst->__refcnt))) { last->next = dst; last = dst; -- cgit v0.10.2 From efa8450f6c93c9d4c99adfea2f52f1d02d878d5b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 9 Feb 2010 09:06:00 +1000 Subject: drm/radeon/kms: add quirk for VGA without DDC on rv730 XFX card. Reported on irc by nirbheek. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index fa82ca7..2dcda61 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -287,6 +287,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *connector_type = DRM_MODE_CONNECTOR_DVID; } + /* XFX Pine Group device rv730 reports no VGA DDC lines + * even though they are wired up to record 0x93 + */ + if ((dev->pdev->device == 0x9498) && + (dev->pdev->subsystem_vendor == 0x1682) && + (dev->pdev->subsystem_device == 0x2452)) { + struct radeon_device *rdev = dev->dev_private; + *i2c_bus = radeon_lookup_i2c_gpio(rdev, 0x93); + } return true; } -- cgit v0.10.2 From fb786100f7c75e154e63d0f5a2982e6d46dfb602 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 8 Feb 2010 11:50:32 +0000 Subject: 9p: Fix the kernel crash on a failed mount The patch fix the crash repoted below [ 15.149907] BUG: unable to handle kernel NULL pointer dereference at 00000001 [ 15.150806] IP: [] p9_virtio_close+0x18/0x24 ..... .... [ 15.150806] Call Trace: [ 15.150806] [] ? p9_client_destroy+0x3f/0x163 [ 15.150806] [] ? p9_client_create+0x25f/0x270 [ 15.150806] [] ? trace_hardirqs_on+0xb/0xd [ 15.150806] [] ? match_token+0x64/0x164 [ 15.150806] [] ? v9fs_session_init+0x2f1/0x3c8 [ 15.150806] [] ? kmem_cache_alloc+0x98/0xb8 [ 15.150806] [] ? trace_hardirqs_on+0xb/0xd [ 15.150806] [] ? v9fs_get_sb+0x47/0x1e8 [ 15.150806] [] ? v9fs_get_sb+0x60/0x1e8 [ 15.150806] [] ? vfs_kern_mount+0x81/0x11a [ 15.150806] [] ? do_kern_mount+0x33/0xbe [ 15.150806] [] ? do_mount+0x654/0x6b3 [ 15.150806] [] ? do_page_fault+0x0/0x284 [ 15.150806] [] ? copy_mount_options+0x73/0xd2 [ 15.150806] [] ? sys_mount+0x61/0x94 [ 15.150806] [] ? syscall_call+0x7/0xb .... [ 15.203562] ---[ end trace 1dd159357709eb4b ]--- [ Signed-off-by: Aneesh Kumar K.V Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 67c4bc7..cb50f4a 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -102,7 +102,8 @@ static void p9_virtio_close(struct p9_client *client) struct virtio_chan *chan = client->trans; mutex_lock(&virtio_9p_lock); - chan->inuse = false; + if (chan) + chan->inuse = false; mutex_unlock(&virtio_9p_lock); } -- cgit v0.10.2 From bf2d29c64dd777e9a40bc4533e721944a590250f Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 8 Feb 2010 17:59:34 -0600 Subject: 9p: fix memory leak in v9fs_parse_options() If match_strdup() fail this function exits without freeing the options string. Signed-off-by: Venkateswararao Jujjuri Sigend-off-by: Eric Van Hensbergen diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 6848788..7d6c213 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -103,8 +103,10 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) return 0; tmp_options = kstrdup(opts, GFP_KERNEL); - if (!tmp_options) + if (!tmp_options) { + ret = -ENOMEM; goto fail_option_alloc; + } options = tmp_options; while ((p = strsep(&options, ",")) != NULL) { @@ -160,8 +162,12 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) break; case Opt_cache: s = match_strdup(&args[0]); - if (!s) - goto fail_option_alloc; + if (!s) { + ret = -ENOMEM; + P9_DPRINTK(P9_DEBUG_ERROR, + "problem allocating copy of cache arg\n"); + goto free_and_return; + } if (strcmp(s, "loose") == 0) v9ses->cache = CACHE_LOOSE; @@ -174,8 +180,12 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) case Opt_access: s = match_strdup(&args[0]); - if (!s) - goto fail_option_alloc; + if (!s) { + ret = -ENOMEM; + P9_DPRINTK(P9_DEBUG_ERROR, + "problem allocating copy of access arg\n"); + goto free_and_return; + } v9ses->flags &= ~V9FS_ACCESS_MASK; if (strcmp(s, "user") == 0) @@ -196,13 +206,10 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) } } +free_and_return: kfree(tmp_options); - return ret; - fail_option_alloc: - P9_DPRINTK(P9_DEBUG_ERROR, - "failed to allocate copy of option argument\n"); - return -ENOMEM; + return ret; } /** -- cgit v0.10.2 From 8781ff9495578dbb74065fae55305110d9f81cb9 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 8 Feb 2010 18:18:34 -0600 Subject: 9p: fix p9_client_destroy unconditional calling v9fs_put_trans restructure client create code to handle error cases better and only cleanup initialized portions of the stack. Signed-off-by: Venkateswararao Jujjuri Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index cbe0669..09d4f1e 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -676,18 +676,12 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) clnt->trans = NULL; spin_lock_init(&clnt->lock); INIT_LIST_HEAD(&clnt->fidlist); - clnt->fidpool = p9_idpool_create(); - if (IS_ERR(clnt->fidpool)) { - err = PTR_ERR(clnt->fidpool); - clnt->fidpool = NULL; - goto error; - } p9_tag_init(clnt); err = parse_opts(options, clnt); if (err < 0) - goto error; + goto free_client; if (!clnt->trans_mod) clnt->trans_mod = v9fs_get_default_trans(); @@ -696,7 +690,14 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) err = -EPROTONOSUPPORT; P9_DPRINTK(P9_DEBUG_ERROR, "No transport defined or default transport\n"); - goto error; + goto free_client; + } + + clnt->fidpool = p9_idpool_create(); + if (IS_ERR(clnt->fidpool)) { + err = PTR_ERR(clnt->fidpool); + clnt->fidpool = NULL; + goto put_trans; } P9_DPRINTK(P9_DEBUG_MUX, "clnt %p trans %p msize %d dotu %d\n", @@ -704,19 +705,25 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) err = clnt->trans_mod->create(clnt, dev_name, options); if (err) - goto error; + goto destroy_fidpool; if ((clnt->msize+P9_IOHDRSZ) > clnt->trans_mod->maxsize) clnt->msize = clnt->trans_mod->maxsize-P9_IOHDRSZ; err = p9_client_version(clnt); if (err) - goto error; + goto close_trans; return clnt; -error: - p9_client_destroy(clnt); +close_trans: + clnt->trans_mod->close(clnt); +destroy_fidpool: + p9_idpool_destroy(clnt->fidpool); +put_trans: + v9fs_put_trans(clnt->trans_mod); +free_client: + kfree(clnt); return ERR_PTR(err); } EXPORT_SYMBOL(p9_client_create); -- cgit v0.10.2 From f927b8907cb25943d6275d4ea036c065b8fd3f33 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 27 Jan 2010 14:29:05 +1000 Subject: drm/nouveau: fix non-vram notifier blocks Due to a thinko, these were previously forced to VRAM even if we allocated them in GART. This commit fixes that bug, but keeps the previous behaviour of using VRAM by default until it's been tested properly across more chipsets. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 343ab7f..fc692e5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -56,7 +56,7 @@ int nouveau_vram_pushbuf; module_param_named(vram_pushbuf, nouveau_vram_pushbuf, int, 0400); MODULE_PARM_DESC(vram_notify, "Force DMA notifiers to be in VRAM"); -int nouveau_vram_notify; +int nouveau_vram_notify = 1; module_param_named(vram_notify, nouveau_vram_notify, int, 0400); MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (>=GeForce 8)"); diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c index 6c66a34..d99dc08 100644 --- a/drivers/gpu/drm/nouveau/nouveau_notifier.c +++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c @@ -34,15 +34,20 @@ nouveau_notifier_init_channel(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct nouveau_bo *ntfy = NULL; + uint32_t flags; int ret; - ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, nouveau_vram_notify ? - TTM_PL_FLAG_VRAM : TTM_PL_FLAG_TT, + if (nouveau_vram_notify) + flags = TTM_PL_FLAG_VRAM; + else + flags = TTM_PL_FLAG_TT; + + ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, flags, 0, 0x0000, false, true, &ntfy); if (ret) return ret; - ret = nouveau_bo_pin(ntfy, TTM_PL_FLAG_VRAM); + ret = nouveau_bo_pin(ntfy, flags); if (ret) goto out_err; @@ -128,6 +133,8 @@ nouveau_notifier_alloc(struct nouveau_channel *chan, uint32_t handle, target = NV_DMA_TARGET_PCI; } else { target = NV_DMA_TARGET_AGP; + if (dev_priv->card_type >= NV_50) + offset += dev_priv->vm_gart_base; } } else { NV_ERROR(dev, "Bad DMA target, mem_type %d!\n", -- cgit v0.10.2 From a32ed69d7bb3cd259d813d71281d62993b9a70fd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Tue, 26 Jan 2010 14:00:42 +0000 Subject: drm/nouveau: Add module options to disable acceleration. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit noaccel=1 disables all acceleration and doesn't even attempt initialising PGRAPH+PFIFO, nofbaccel=1 only makes fbcon unaccelerated. Signed-off-by: Marcin Kościelnicki Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index fc692e5..da3b93b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -75,6 +75,14 @@ MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status"); int nouveau_ignorelid = 0; module_param_named(ignorelid, nouveau_ignorelid, int, 0400); +MODULE_PARM_DESC(noagp, "Disable all acceleration"); +int nouveau_noaccel = 0; +module_param_named(noaccel, nouveau_noaccel, int, 0400); + +MODULE_PARM_DESC(noagp, "Disable fbcon acceleration"); +int nouveau_nofbaccel = 0; +module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400); + MODULE_PARM_DESC(tv_norm, "Default TV norm.\n" "\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n" "\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n" diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 6b96904..5445cef 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -678,6 +678,8 @@ extern int nouveau_reg_debug; extern char *nouveau_vbios; extern int nouveau_ctxfw; extern int nouveau_ignorelid; +extern int nouveau_nofbaccel; +extern int nouveau_noaccel; /* nouveau_state.c */ extern void nouveau_preclose(struct drm_device *dev, struct drm_file *); diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 0b05c86..eddadac 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -267,8 +267,12 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, dev_priv->fbdev_info = info; strcpy(info->fix.id, "nouveaufb"); - info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | - FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT; + if (nouveau_nofbaccel) + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_DISABLED; + else + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | + FBINFO_HWACCEL_FILLRECT | + FBINFO_HWACCEL_IMAGEBLIT; info->fbops = &nouveau_fbcon_ops; info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset - dev_priv->vm_vram_base; @@ -316,7 +320,7 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, par->nouveau_fb = nouveau_fb; par->dev = dev; - if (dev_priv->channel) { + if (dev_priv->channel && !nouveau_nofbaccel) { switch (dev_priv->card_type) { case NV_50: nv50_fbcon_accel_init(info); diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index f2d0187..241e24d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -427,15 +427,19 @@ nouveau_card_init(struct drm_device *dev) if (ret) goto out_timer; - /* PGRAPH */ - ret = engine->graph.init(dev); - if (ret) - goto out_fb; + if (nouveau_noaccel) + engine->graph.accel_blocked = true; + else { + /* PGRAPH */ + ret = engine->graph.init(dev); + if (ret) + goto out_fb; - /* PFIFO */ - ret = engine->fifo.init(dev); - if (ret) - goto out_graph; + /* PFIFO */ + ret = engine->fifo.init(dev); + if (ret) + goto out_graph; + } /* this call irq_preinstall, register irq handler and * call irq_postinstall @@ -479,9 +483,11 @@ nouveau_card_init(struct drm_device *dev) out_irq: drm_irq_uninstall(dev); out_fifo: - engine->fifo.takedown(dev); + if (!nouveau_noaccel) + engine->fifo.takedown(dev); out_graph: - engine->graph.takedown(dev); + if (!nouveau_noaccel) + engine->graph.takedown(dev); out_fb: engine->fb.takedown(dev); out_timer: @@ -518,8 +524,10 @@ static void nouveau_card_takedown(struct drm_device *dev) dev_priv->channel = NULL; } - engine->fifo.takedown(dev); - engine->graph.takedown(dev); + if (!nouveau_noaccel) { + engine->fifo.takedown(dev); + engine->graph.takedown(dev); + } engine->fb.takedown(dev); engine->timer.takedown(dev); engine->mc.takedown(dev); -- cgit v0.10.2 From 69c9700b544e496dc3ccf472a4f3a76dcf4abaf7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Tue, 26 Jan 2010 18:39:20 +0000 Subject: drm/nouveau: Add getparam to get available PGRAPH units. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On nv50, this will be needed by applications using CUDA to know how much stack/local memory to allocate. Signed-off-by: Marcin Kościelnicki Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h index 251f1b3..aa9b310 100644 --- a/drivers/gpu/drm/nouveau/nouveau_reg.h +++ b/drivers/gpu/drm/nouveau/nouveau_reg.h @@ -99,6 +99,7 @@ * the card will hang early on in the X init process. */ # define NV_PMC_ENABLE_UNK13 (1<<13) +#define NV40_PMC_GRAPH_UNITS 0x00001540 #define NV40_PMC_BACKLIGHT 0x000015f0 # define NV40_PMC_BACKLIGHT_MASK 0x001f0000 #define NV40_PMC_1700 0x00001700 diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 241e24d..fcd7610 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -825,6 +825,15 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data, case NOUVEAU_GETPARAM_VM_VRAM_BASE: getparam->value = dev_priv->vm_vram_base; break; + case NOUVEAU_GETPARAM_GRAPH_UNITS: + /* NV40 and NV50 versions are quite different, but register + * address is the same. User is supposed to know the card + * family anyway... */ + if (dev_priv->chipset >= 0x40) { + getparam->value = nv_rd32(dev, NV40_PMC_GRAPH_UNITS); + break; + } + /* FALLTHRU */ default: NV_ERROR(dev, "unknown parameter %lld\n", getparam->param); return -EINVAL; diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h index 1e67c44..f745948 100644 --- a/include/drm/nouveau_drm.h +++ b/include/drm/nouveau_drm.h @@ -77,6 +77,7 @@ struct drm_nouveau_gpuobj_free { #define NOUVEAU_GETPARAM_PCI_PHYSICAL 10 #define NOUVEAU_GETPARAM_CHIPSET_ID 11 #define NOUVEAU_GETPARAM_VM_VRAM_BASE 12 +#define NOUVEAU_GETPARAM_GRAPH_UNITS 13 struct drm_nouveau_getparam { uint64_t param; uint64_t value; -- cgit v0.10.2 From 139295b671ff4ccd904f2fa58e9dbc0fe99cc7fe Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 30 Jan 2010 18:28:00 +0100 Subject: drm/nouveau: Fixup semaphores on pre-nv50 cards. Apparently, they generate a PFIFO interrupt each time one of the semaphore methods is executed if its ctxdma wasn't manually marked as valid. This patch makes it flip the valid bit in response to the DMA_SEMAPHORE method (which triggers the IRQ even for a valid ctxdma). Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 3b9bad6..baa9b3e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -211,6 +211,20 @@ nouveau_fifo_irq_handler(struct drm_device *dev) get + 4); } + if (status & NV_PFIFO_INTR_SEMAPHORE) { + uint32_t sem; + + status &= ~NV_PFIFO_INTR_SEMAPHORE; + nv_wr32(dev, NV03_PFIFO_INTR_0, + NV_PFIFO_INTR_SEMAPHORE); + + sem = nv_rd32(dev, NV10_PFIFO_CACHE1_SEMAPHORE); + nv_wr32(dev, NV10_PFIFO_CACHE1_SEMAPHORE, sem | 0x1); + + nv_wr32(dev, NV03_PFIFO_CACHE1_GET, get + 4); + nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, 1); + } + if (status) { NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n", status, chid); -- cgit v0.10.2 From f0fbe3eb5f65fe5948219f4ceac68f8a665b1fc6 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sat, 30 Jan 2010 23:21:38 +0100 Subject: drm/nouveau: call ttm_bo_wait with the bo lock held to prevent hang nouveau_gem_ioctl_cpu_prep calls ttm_bo_wait without the bo lock held. ttm_bo_wait unlocks that lock, and so must be called with it held. Currently this bug causes libdrm nouveau_bo_busy() to hang the machine. Signed-off-by: Luca Barbieri Acked-by: Maarten Maathuis Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 6ac804b..70cc308 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -925,7 +925,9 @@ nouveau_gem_ioctl_cpu_prep(struct drm_device *dev, void *data, } if (req->flags & NOUVEAU_GEM_CPU_PREP_NOBLOCK) { + spin_lock(&nvbo->bo.lock); ret = ttm_bo_wait(&nvbo->bo, false, false, no_wait); + spin_unlock(&nvbo->bo.lock); } else { ret = ttm_bo_synccpu_write_grab(&nvbo->bo, no_wait); if (ret == 0) -- cgit v0.10.2 From 7dad9ef6d9255b4d2d0a26305a785a55f3ba55e3 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 2 Feb 2010 14:40:30 -0800 Subject: drivers/gpu/drm/nouveau/nouveau_grctx.c: correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Cc: David Airlie Cc: Ben Skeggs Signed-off-by: Andrew Morton Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c index 419f4c2..c7ebec6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_grctx.c +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c @@ -97,8 +97,8 @@ nouveau_grctx_prog_load(struct drm_device *dev) } pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); + if (!pgraph->ctxvals) { + NV_ERROR(dev, "OOM copying ctxvals\n"); release_firmware(fw); nouveau_grctx_fini(dev); return -ENOMEM; -- cgit v0.10.2 From 126b5440565a1fa0cb49fd30041525d5a9a848f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Wed, 27 Jan 2010 14:03:18 +0000 Subject: drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We used single shared fbops struct and patched it at fb init time with pointers to the right variant. On mixed multicard, this meant that it was either sending NV50-style commands to all cards, or NV04-style commands to all cards. Signed-off-by: Marcin Kościelnicki Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index eddadac..ea879a2 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -107,6 +107,34 @@ static struct fb_ops nouveau_fbcon_ops = { .fb_setcmap = drm_fb_helper_setcmap, }; +static struct fb_ops nv04_fbcon_ops = { + .owner = THIS_MODULE, + .fb_check_var = drm_fb_helper_check_var, + .fb_set_par = drm_fb_helper_set_par, + .fb_setcolreg = drm_fb_helper_setcolreg, + .fb_fillrect = nv04_fbcon_fillrect, + .fb_copyarea = nv04_fbcon_copyarea, + .fb_imageblit = nv04_fbcon_imageblit, + .fb_sync = nouveau_fbcon_sync, + .fb_pan_display = drm_fb_helper_pan_display, + .fb_blank = drm_fb_helper_blank, + .fb_setcmap = drm_fb_helper_setcmap, +}; + +static struct fb_ops nv50_fbcon_ops = { + .owner = THIS_MODULE, + .fb_check_var = drm_fb_helper_check_var, + .fb_set_par = drm_fb_helper_set_par, + .fb_setcolreg = drm_fb_helper_setcolreg, + .fb_fillrect = nv50_fbcon_fillrect, + .fb_copyarea = nv50_fbcon_copyarea, + .fb_imageblit = nv50_fbcon_imageblit, + .fb_sync = nouveau_fbcon_sync, + .fb_pan_display = drm_fb_helper_pan_display, + .fb_blank = drm_fb_helper_blank, + .fb_setcmap = drm_fb_helper_setcmap, +}; + static void nouveau_fbcon_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno) { @@ -324,9 +352,11 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, switch (dev_priv->card_type) { case NV_50: nv50_fbcon_accel_init(info); + info->fbops = &nv50_fbcon_ops; break; default: nv04_fbcon_accel_init(info); + info->fbops = &nv04_fbcon_ops; break; }; } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index 462e0b8..f9c34e1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -40,7 +40,13 @@ int nouveau_fbcon_remove(struct drm_device *dev, struct drm_framebuffer *fb); void nouveau_fbcon_restore(void); void nouveau_fbcon_zfill(struct drm_device *dev); +void nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region); +void nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect); +void nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image); int nv04_fbcon_accel_init(struct fb_info *info); +void nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect); +void nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region); +void nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image); int nv50_fbcon_accel_init(struct fb_info *info); void nouveau_fbcon_gpu_lockup(struct fb_info *info); diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index d910873..fd01caa 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -27,7 +27,7 @@ #include "nouveau_dma.h" #include "nouveau_fbcon.h" -static void +void nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) { struct nouveau_fbcon_par *par = info->par; @@ -54,7 +54,7 @@ nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) FIRE_RING(chan); } -static void +void nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) { struct nouveau_fbcon_par *par = info->par; @@ -88,7 +88,7 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) FIRE_RING(chan); } -static void +void nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) { struct nouveau_fbcon_par *par = info->par; @@ -307,9 +307,6 @@ nv04_fbcon_accel_init(struct fb_info *info) FIRE_RING(chan); - info->fbops->fb_fillrect = nv04_fbcon_fillrect; - info->fbops->fb_copyarea = nv04_fbcon_copyarea; - info->fbops->fb_imageblit = nv04_fbcon_imageblit; return 0; } diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index e4f279e..0f57cdf 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -3,7 +3,7 @@ #include "nouveau_dma.h" #include "nouveau_fbcon.h" -static void +void nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) { struct nouveau_fbcon_par *par = info->par; @@ -46,7 +46,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) FIRE_RING(chan); } -static void +void nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) { struct nouveau_fbcon_par *par = info->par; @@ -81,7 +81,7 @@ nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) FIRE_RING(chan); } -static void +void nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) { struct nouveau_fbcon_par *par = info->par; @@ -262,9 +262,6 @@ nv50_fbcon_accel_init(struct fb_info *info) OUT_RING(chan, info->fix.smem_start - dev_priv->fb_phys + dev_priv->vm_vram_base); - info->fbops->fb_fillrect = nv50_fbcon_fillrect; - info->fbops->fb_copyarea = nv50_fbcon_copyarea; - info->fbops->fb_imageblit = nv50_fbcon_imageblit; return 0; } -- cgit v0.10.2 From 9967b9481d2387af4dbe5ceda7a209466ba004a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Mon, 8 Feb 2010 00:20:17 +0000 Subject: drm/nouveau: Add proper vgaarb support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin Kościelnicki Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index fcd7610..a4851af 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -310,6 +310,14 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) static unsigned int nouveau_vga_set_decode(void *priv, bool state) { + struct drm_device *dev = priv; + struct drm_nouveau_private *dev_priv = dev->dev_private; + + if (dev_priv->chipset >= 0x40) + nv_wr32(dev, 0x88054, state); + else + nv_wr32(dev, 0x1854, state); + if (state) return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM | VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; -- cgit v0.10.2 From e235c1f3e132a243a1f81b3d95c99ee199b4d3f3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 22 Jan 2010 13:17:28 +1000 Subject: drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50 It appears we aren't required to do memory sizing ourselves on nv40 either. NV40 init tables read a strap from PEXTDEV_BOOT_0 into a CRTC register, and then later use that value to select a memory configuration (written to PFB_CFG0, just like INIT_COMPUTE_MEM on earlier cards) with INIT_IO_RESTRICT_PROG. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d7f8d8b..fb4793e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -1865,7 +1865,7 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_nouveau_private *dev_priv = bios->dev->dev_private; - if (dev_priv->card_type >= NV_50) + if (dev_priv->card_type >= NV_40) return 1; /* -- cgit v0.10.2 From 1ee7698fc3ec3d7949fa55e5154c8f5de8f1c3d9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 9 Feb 2010 10:08:34 +1000 Subject: drm/nouveau: make dp auxch xfer len check for reads only Writes don't return a count, and adding the check broke native DP. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index dd49372..f954ad9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -502,12 +502,12 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, break; } - if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) { - ret = -EREMOTEIO; - goto out; - } - if (cmd & 1) { + if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) { + ret = -EREMOTEIO; + goto out; + } + for (i = 0; i < 4; i++) { data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i)); NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]); -- cgit v0.10.2 From 9eb07c259207d048e3ee8be2a77b2a4680b1edd4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Feb 2010 12:31:47 +1100 Subject: md: fix 'degraded' calculation when starting a reshape. This code was written long ago when it was not possible to reshape a degraded array. Now it is so the current level of degraded-ness needs to be taken in to account. Also newly addded devices should only reduce degradedness if they are deemed to be in-sync. In particular, if you convert a RAID5 to a RAID6, and increase the number of devices at the same time, then the 5->6 conversion will make the array degraded so the current code will produce a wrong value for 'degraded' - "-1" to be precise. If the reshape runs to completion end_reshape will calculate a correct new value for 'degraded', but if a device fails during the reshape an incorrect decision might be made based on the incorrect value of "degraded". This patch is suitable for 2.6.32-stable and if they are still open, 2.6.31-stable and 2.6.30-stable as well. Cc: stable@kernel.org Reported-by: Michael Evans Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e84204e..b5629c3 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5464,11 +5464,11 @@ static int raid5_start_reshape(mddev_t *mddev) !test_bit(Faulty, &rdev->flags)) { if (raid5_add_disk(mddev, rdev) == 0) { char nm[20]; - if (rdev->raid_disk >= conf->previous_raid_disks) + if (rdev->raid_disk >= conf->previous_raid_disks) { set_bit(In_sync, &rdev->flags); - else + added_devices++; + } else rdev->recovery_offset = 0; - added_devices++; sprintf(nm, "rd%d", rdev->raid_disk); if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm)) @@ -5480,9 +5480,12 @@ static int raid5_start_reshape(mddev_t *mddev) break; } + /* When a reshape changes the number of devices, ->degraded + * is measured against the large of the pre and post number of + * devices.*/ if (mddev->delta_disks > 0) { spin_lock_irqsave(&conf->device_lock, flags); - mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) + mddev->degraded += (conf->raid_disks - conf->previous_raid_disks) - added_devices; spin_unlock_irqrestore(&conf->device_lock, flags); } -- cgit v0.10.2 From 2d171886b183982feb03446997c65e9e212b948e Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Mon, 8 Feb 2010 22:37:24 -0800 Subject: cxgb3: fix GRO checksum check Verify the HW checksum state for frames handed to GRO processing. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index bdbd147..318a018 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2079,6 +2079,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, struct sge_fl *fl, int len, int complete) { struct rx_sw_desc *sd = &fl->sdesc[fl->cidx]; + struct port_info *pi = netdev_priv(qs->netdev); struct sk_buff *skb = NULL; struct cpl_rx_pkt *cpl; struct skb_frag_struct *rx_frag; @@ -2116,11 +2117,18 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, if (!nr_frags) { offset = 2 + sizeof(struct cpl_rx_pkt); - qs->lro_va = sd->pg_chunk.va + 2; - } - len -= offset; + cpl = qs->lro_va = sd->pg_chunk.va + 2; - prefetch(qs->lro_va); + if ((pi->rx_offload & T3_RX_CSUM) && + cpl->csum_valid && cpl->csum == htons(0xffff)) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++; + } else + skb->ip_summed = CHECKSUM_NONE; + } else + cpl = qs->lro_va; + + len -= offset; rx_frag += nr_frags; rx_frag->page = sd->pg_chunk.page; @@ -2136,12 +2144,8 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, return; skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); - skb->ip_summed = CHECKSUM_UNNECESSARY; - cpl = qs->lro_va; if (unlikely(cpl->vlan_valid)) { - struct net_device *dev = qs->netdev; - struct port_info *pi = netdev_priv(dev); struct vlan_group *grp = pi->vlan_grp; if (likely(grp != NULL)) { -- cgit v0.10.2 From d4ae20b3799e0b6fa0d832a645a422da9f239868 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Mon, 8 Feb 2010 22:41:44 -0800 Subject: net/sched: Fix module name in Kconfig The action modules have been prefixed with 'act_', but the Kconfig description was not changed. Signed-off-by: Jan Luebbe Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 929218a4..21f9c76 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -433,7 +433,7 @@ config NET_ACT_POLICE module. To compile this code as a module, choose M here: the - module will be called police. + module will be called act_police. config NET_ACT_GACT tristate "Generic actions" @@ -443,7 +443,7 @@ config NET_ACT_GACT accepting packets. To compile this code as a module, choose M here: the - module will be called gact. + module will be called act_gact. config GACT_PROB bool "Probability support" @@ -459,7 +459,7 @@ config NET_ACT_MIRRED other devices. To compile this code as a module, choose M here: the - module will be called mirred. + module will be called act_mirred. config NET_ACT_IPT tristate "IPtables targets" @@ -469,7 +469,7 @@ config NET_ACT_IPT classification. To compile this code as a module, choose M here: the - module will be called ipt. + module will be called act_ipt. config NET_ACT_NAT tristate "Stateless NAT" @@ -479,7 +479,7 @@ config NET_ACT_NAT netfilter for NAT unless you know what you are doing. To compile this code as a module, choose M here: the - module will be called nat. + module will be called act_nat. config NET_ACT_PEDIT tristate "Packet Editing" @@ -488,7 +488,7 @@ config NET_ACT_PEDIT Say Y here if you want to mangle the content of packets. To compile this code as a module, choose M here: the - module will be called pedit. + module will be called act_pedit. config NET_ACT_SIMP tristate "Simple Example (Debug)" @@ -502,7 +502,7 @@ config NET_ACT_SIMP If unsure, say N. To compile this code as a module, choose M here: the - module will be called simple. + module will be called act_simple. config NET_ACT_SKBEDIT tristate "SKB Editing" @@ -513,7 +513,7 @@ config NET_ACT_SKBEDIT If unsure, say N. To compile this code as a module, choose M here: the - module will be called skbedit. + module will be called act_skbedit. config NET_CLS_IND bool "Incoming device classification" -- cgit v0.10.2 From 3af26f58d1920d904da87c3897d23070fe2266b4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 8 Feb 2010 22:42:40 -0800 Subject: MAINTAINERS: networking drivers - Add git net-next tree During the rc period, patches that are not bugfixes should be done using the net-next tree. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 03f38c1..602022d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3836,6 +3836,7 @@ NETWORKING DRIVERS L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git S: Odd Fixes F: drivers/net/ F: include/linux/if_* -- cgit v0.10.2 From bcf4d812e66ee95f762b38063d654fd1ff7156b0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 8 Feb 2010 22:44:18 -0800 Subject: drivers/net: Correct NULL test Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c index 62d9c9c..1dd4403 100644 --- a/drivers/net/ax88796.c +++ b/drivers/net/ax88796.c @@ -921,7 +921,7 @@ static int ax_probe(struct platform_device *pdev) size = (res->end - res->start) + 1; ax->mem2 = request_mem_region(res->start, size, pdev->name); - if (ax->mem == NULL) { + if (ax->mem2 == NULL) { dev_err(&pdev->dev, "cannot reserve registers\n"); ret = -ENXIO; goto exit_mem1; -- cgit v0.10.2 From 4c52228d1b83ef67d4fa381c2ade70122c9e3c34 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 9 Feb 2010 09:46:07 +0100 Subject: [S390] qdio: continue polling for buffer state ERROR Inbound traffic handling may hang if next buffer to check is in state ERROR, polling is stopped and the final check for further available inbound buffers disregards buffers in state ERROR. This patch includes state ERROR when checking availability of more inbound buffers. Cc: Jan Glauber Signed-off-by: Ursula Braun Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 999fe80..5781c5d 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -531,7 +531,7 @@ static inline int qdio_inbound_q_done(struct qdio_q *q) qdio_siga_sync_q(q); get_buf_state(q, q->first_to_check, &state, 0); - if (state == SLSB_P_INPUT_PRIMED) + if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR) /* more work coming */ return 0; -- cgit v0.10.2 From 959153d34544b7237bad263e73a5abdf94fc7722 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Tue, 9 Feb 2010 09:46:08 +0100 Subject: [S390] qdio: prevent call trace if CHPID is offline If a CHPID is offline during a device shutdown the ccw_device_halt|clear may fail and the qdio device stays in state STOPPED until the shutdown is finished. If an interrupt occurs before the device is set to INACTIVE the STOPPED state triggers a WARN_ON in the interrupt handler. Prevent this WARN_ON by catching the STOPPED state in the interrupt handler. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 5781c5d..62b654a 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -960,6 +960,8 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, qdio_handle_activate_check(cdev, intparm, cstat, dstat); break; + case QDIO_IRQ_STATE_STOPPED: + break; default: WARN_ON(1); } -- cgit v0.10.2 From 7717aefff3290c61e5f9e6aa39e9e1dc63cd4e81 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Feb 2010 09:46:09 +0100 Subject: [S390] Fix struct _lowcore layout. Offsets and sizes are wrong for 32 bit. Got broken with 866ba284 "[S390] cleanup lowcore.h". Reported-by: Mahesh Salgaonkar Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index f2ef4b6..c25dfac 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -293,12 +293,12 @@ struct _lowcore __u64 clock_comparator; /* 0x02d0 */ __u32 machine_flags; /* 0x02d8 */ __u32 ftrace_func; /* 0x02dc */ - __u8 pad_0x02f0[0x0300-0x02f0]; /* 0x02f0 */ + __u8 pad_0x02e0[0x0300-0x02e0]; /* 0x02e0 */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ - __u8 pad_0x0400[0x0e00-0x0400]; /* 0x0400 */ + __u8 pad_0x0340[0x0e00-0x0340]; /* 0x0340 */ /* * 0xe00 contains the address of the IPL Parameter Information -- cgit v0.10.2 From 7fbfc683f1cc4051aa095ebe48d9d1e8b015682d Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 9 Feb 2010 14:43:05 +1100 Subject: perf: Fix hypervisor sample reporting cpumode bits are defined as such: #define PERF_RECORD_MISC_KERNEL (1 << 0) #define PERF_RECORD_MISC_USER (2 << 0) #define PERF_RECORD_MISC_HYPERVISOR (3 << 0) We need to compare against the complete value of cpumode, otherwise hypervisor samples get incorrectly attributed as userspace. Signed-off-by: Anton Blanchard Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: fweisbec@gmail.com LKML-Reference: <20100209034304.GA3702@kryten> Signed-off-by: Ingo Molnar diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index bb0fd6d..8a9e6ba 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -295,10 +295,10 @@ void thread__find_addr_location(struct thread *self, al->thread = self; al->addr = addr; - if (cpumode & PERF_RECORD_MISC_KERNEL) { + if (cpumode == PERF_RECORD_MISC_KERNEL) { al->level = 'k'; mg = &session->kmaps; - } else if (cpumode & PERF_RECORD_MISC_USER) + } else if (cpumode == PERF_RECORD_MISC_USER) al->level = '.'; else { al->level = 'H'; -- cgit v0.10.2 From c93d89f3dbf0202bf19c07960ca8602b48c2f9a0 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 27 Jan 2010 19:13:40 +0800 Subject: Export the symbol of getboottime and mmonotonic_to_bootbased Export getboottime and monotonic_to_bootbased in order to let them could be used by following patch. Cc: stable@kernel.org Signed-off-by: Jason Wang Signed-off-by: Marcelo Tosatti diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 7faaa32..e2ab064 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -880,6 +880,7 @@ void getboottime(struct timespec *ts) set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec); } +EXPORT_SYMBOL_GPL(getboottime); /** * monotonic_to_bootbased - Convert the monotonic time to boot based. @@ -889,6 +890,7 @@ void monotonic_to_bootbased(struct timespec *ts) { *ts = timespec_add_safe(*ts, total_sleep_time); } +EXPORT_SYMBOL_GPL(monotonic_to_bootbased); unsigned long get_seconds(void) { -- cgit v0.10.2 From 923de3cf5bf12049628019010e36623fca5ef6d1 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 27 Jan 2010 19:13:49 +0800 Subject: kvmclock: count total_sleep_time when updating guest clock Current kvm wallclock does not consider the total_sleep_time which could cause wrong wallclock in guest after host suspend/resume. This patch solve this issue by counting total_sleep_time to get the correct host boot time. Cc: stable@kernel.org Signed-off-by: Jason Wang Acked-by: Glauber Costa Signed-off-by: Marcelo Tosatti diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 1ddcad4..a1e1bc9 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -670,7 +670,7 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) { static int version; struct pvclock_wall_clock wc; - struct timespec now, sys, boot; + struct timespec boot; if (!wall_clock) return; @@ -685,9 +685,7 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) * wall clock specified here. guest system time equals host * system time for us, thus we must fill in host boot time here. */ - now = current_kernel_time(); - ktime_get_ts(&sys); - boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys)); + getboottime(&boot); wc.sec = boot.tv_sec; wc.nsec = boot.tv_nsec; @@ -762,6 +760,7 @@ static void kvm_write_guest_time(struct kvm_vcpu *v) local_irq_save(flags); kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp); ktime_get_ts(&ts); + monotonic_to_bootbased(&ts); local_irq_restore(flags); /* With all the info we got, fill in the values */ -- cgit v0.10.2 From ee73f656a604d5aa9df86a97102e4e462dd79924 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 29 Jan 2010 17:28:41 -0200 Subject: KVM: PIT: control word is write-only PIT control word (address 0x43) is write-only, reads are undefined. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 296aba4..15578f1 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -467,6 +467,9 @@ static int pit_ioport_read(struct kvm_io_device *this, return -EOPNOTSUPP; addr &= KVM_PIT_CHANNEL_MASK; + if (addr == 3) + return 0; + s = &pit_state->channels[addr]; mutex_lock(&pit_state->lock); -- cgit v0.10.2 From 6c8afef551fef87a3bf24f8a74c69a7f2f72fc82 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 9 Feb 2010 10:07:00 +0530 Subject: ath9k: Fix sequence numbers for PAE frames Currently, PAE frames are not assigned proper sequence numbers. Since sending PAE frames as part of aggregates breaks crupto with several APs, they are sent as normal MPDUs. Fix the seqeuence number issue by updating the frame with the internal sequence number. Tested-by: Felix Fietkau Signed-off-by: Sujith Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index fa12b90..29bf336 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1615,7 +1615,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_frmlen -= padsize; } - if (conf_is_ht(&hw->conf) && !is_pae(skb)) + if (conf_is_ht(&hw->conf)) bf->bf_state.bf_type |= BUF_HT; bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq); @@ -1701,7 +1701,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, goto tx_done; } - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) { /* * Try aggregation if it's a unicast data frame * and the destination is HT capable. -- cgit v0.10.2 From 33a5d083e786f0c3fb4efedb59b0e8e3de39963b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 9 Feb 2010 12:07:41 +0100 Subject: iwmc3200wifi: Test of wrong pointer after kzalloc in iwm_mlme_update_bss_table() The wrong pointer was tested. Signed-off-by: Roel Kluin Acked-by: Samuel Ortiz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 3db3d8b..64d16fe 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -794,7 +794,7 @@ static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf, } bss->bss = kzalloc(bss_len, GFP_KERNEL); - if (!bss) { + if (!bss->bss) { kfree(bss); IWM_ERR(iwm, "Couldn't allocate bss\n"); return -ENOMEM; -- cgit v0.10.2 From 2c1740098c708b465e87637b237feb2fd98f129a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 8 Feb 2010 09:32:27 -0500 Subject: NFS: Fix a bug in nfs_fscache_release_page() Not having an fscache cookie is perfectly valid if the user didn't mount with the fscache option. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=15234 Signed-off-by: Trond Myklebust Acked-by: David Howells Cc: stable@kernel.org diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c index fa58800..237874f 100644 --- a/fs/nfs/fscache.c +++ b/fs/nfs/fscache.c @@ -354,12 +354,11 @@ void nfs_fscache_reset_inode_cookie(struct inode *inode) */ int nfs_fscache_release_page(struct page *page, gfp_t gfp) { - struct nfs_inode *nfsi = NFS_I(page->mapping->host); - struct fscache_cookie *cookie = nfsi->fscache; - - BUG_ON(!cookie); - if (PageFsCache(page)) { + struct nfs_inode *nfsi = NFS_I(page->mapping->host); + struct fscache_cookie *cookie = nfsi->fscache; + + BUG_ON(!cookie); dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n", cookie, page, nfsi); -- cgit v0.10.2 From 7549ad5f9b6eda49bbac4b14c5b8f37bf464f922 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 8 Feb 2010 09:32:34 -0500 Subject: NFS: Remove a redundant check for PageFsCache in nfs_migrate_page() Signed-off-by: Trond Myklebust Acked-by: David Howells diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 7b54b8b..d63d964 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1598,8 +1598,7 @@ int nfs_migrate_page(struct address_space *mapping, struct page *newpage, struct nfs_page *req; int ret; - if (PageFsCache(page)) - nfs_fscache_release_page(page, GFP_KERNEL); + nfs_fscache_release_page(page, GFP_KERNEL); req = nfs_find_and_lock_request(page); ret = PTR_ERR(req); -- cgit v0.10.2 From fdcb45777a3d1689c5541e1f85ee3ebbd197d2c1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 8 Feb 2010 09:32:40 -0500 Subject: NFS: Fix the mapping of the NFSERR_SERVERFAULT error It was recently pointed out that the NFSERR_SERVERFAULT error, which is designed to inform the user of a serious internal error on the server, was being mapped to an error value that is internal to the kernel. This patch maps it to the error EREMOTEIO, which is exported to userland through errno.h. Signed-off-by: Trond Myklebust Cc: stable@kernel.org diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c index 0adefc4..59047f8 100644 --- a/fs/nfs/mount_clnt.c +++ b/fs/nfs/mount_clnt.c @@ -120,7 +120,7 @@ static struct { { .status = MNT3ERR_INVAL, .errno = -EINVAL, }, { .status = MNT3ERR_NAMETOOLONG, .errno = -ENAMETOOLONG, }, { .status = MNT3ERR_NOTSUPP, .errno = -ENOTSUPP, }, - { .status = MNT3ERR_SERVERFAULT, .errno = -ESERVERFAULT, }, + { .status = MNT3ERR_SERVERFAULT, .errno = -EREMOTEIO, }, }; struct mountres { diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c index 5e078b2..7bc2da8 100644 --- a/fs/nfs/nfs2xdr.c +++ b/fs/nfs/nfs2xdr.c @@ -699,7 +699,7 @@ static struct { { NFSERR_BAD_COOKIE, -EBADCOOKIE }, { NFSERR_NOTSUPP, -ENOTSUPP }, { NFSERR_TOOSMALL, -ETOOSMALL }, - { NFSERR_SERVERFAULT, -ESERVERFAULT }, + { NFSERR_SERVERFAULT, -EREMOTEIO }, { NFSERR_BADTYPE, -EBADTYPE }, { NFSERR_JUKEBOX, -EJUKEBOX }, { -1, -EIO } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index e437fd6..5cd5184 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4631,7 +4631,7 @@ static int decode_sequence(struct xdr_stream *xdr, * If the server returns different values for sessionID, slotID or * sequence number, the server is looney tunes. */ - status = -ESERVERFAULT; + status = -EREMOTEIO; if (memcmp(id.data, res->sr_session->sess_id.data, NFS4_MAX_SESSIONID_LEN)) { @@ -5774,7 +5774,7 @@ static struct { { NFS4ERR_BAD_COOKIE, -EBADCOOKIE }, { NFS4ERR_NOTSUPP, -ENOTSUPP }, { NFS4ERR_TOOSMALL, -ETOOSMALL }, - { NFS4ERR_SERVERFAULT, -ESERVERFAULT }, + { NFS4ERR_SERVERFAULT, -EREMOTEIO }, { NFS4ERR_BADTYPE, -EBADTYPE }, { NFS4ERR_LOCKED, -EAGAIN }, { NFS4ERR_SYMLINK, -ELOOP }, @@ -5801,7 +5801,7 @@ nfs4_stat_to_errno(int stat) } if (stat <= 10000 || stat > 10100) { /* The server is looney tunes. */ - return -ESERVERFAULT; + return -EREMOTEIO; } /* If we cannot translate the error, the recovery routines should * handle it. -- cgit v0.10.2 From fed08d036f2aabd8d0c684439de37f8ebec2bbc2 Mon Sep 17 00:00:00 2001 From: Jody Bruchon Date: Sat, 6 Feb 2010 10:46:26 -0500 Subject: ALSA: hda-intel: Avoid divide by zero crash On my AMD780V chipset, hda_intel.c can crash the kernel with a divide by zero for as-yet unknown reasons. A simple check for zero prevents it, though the problem that causes it remains. Since the workaround is harmless and won't affect anyone except victims of this bug, it should be safe; moreover, because this crash can be triggered by a user-mode application, there are denial of service implications on the systems affected by the bug without the patch. Signed-off-by: Jody Bruchon Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b8faa6d..e767c3f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1893,6 +1893,12 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) if (!bdl_pos_adj[chip->dev_index]) return 1; /* no delayed ack */ + if (azx_dev->period_bytes == 0) { + printk(KERN_WARNING + "hda-intel: Divide by zero was avoided " + "in azx_dev->period_bytes.\n"); + return 0; + } if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2) return 0; /* NG - it's below the period boundary */ return 1; /* OK, it's fine */ -- cgit v0.10.2 From 39c9bfb453b748ce220ceefacbe2a5c19fabf67b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 9 Feb 2010 10:22:29 +1000 Subject: drm/nv50: prevent multiple init tables being parsed at the same time With DVI and DP plugged, the DVI clock change interrupts being run can cause DP link training to fail. This adds a spinlock around init table parsing to prevent this. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index fb4793e..2cd0fad 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3765,7 +3765,6 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, */ struct drm_nouveau_private *dev_priv = dev->dev_private; - struct init_exec iexec = {true, false}; struct nvbios *bios = &dev_priv->VBIOS; uint8_t *table = &bios->data[bios->display.script_table_ptr]; uint8_t *otable = NULL; @@ -3845,8 +3844,6 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } } - bios->display.output = dcbent; - if (pxclk == 0) { script = ROM16(otable[6]); if (!script) { @@ -3855,7 +3852,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } NV_TRACE(dev, "0x%04X: parsing output script 0\n", script); - parse_init_table(bios, script, &iexec); + nouveau_bios_run_init_table(dev, script, dcbent); } else if (pxclk == -1) { script = ROM16(otable[8]); @@ -3865,7 +3862,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } NV_TRACE(dev, "0x%04X: parsing output script 1\n", script); - parse_init_table(bios, script, &iexec); + nouveau_bios_run_init_table(dev, script, dcbent); } else if (pxclk == -2) { if (table[4] >= 12) @@ -3878,7 +3875,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } NV_TRACE(dev, "0x%04X: parsing output script 2\n", script); - parse_init_table(bios, script, &iexec); + nouveau_bios_run_init_table(dev, script, dcbent); } else if (pxclk > 0) { script = ROM16(otable[table[4] + i*6 + 2]); @@ -3890,7 +3887,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script); - parse_init_table(bios, script, &iexec); + nouveau_bios_run_init_table(dev, script, dcbent); } else if (pxclk < 0) { script = ROM16(otable[table[4] + i*6 + 4]); @@ -3902,7 +3899,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, } NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script); - parse_init_table(bios, script, &iexec); + nouveau_bios_run_init_table(dev, script, dcbent); } return 0; @@ -5864,10 +5861,13 @@ nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table, struct drm_nouveau_private *dev_priv = dev->dev_private; struct nvbios *bios = &dev_priv->VBIOS; struct init_exec iexec = { true, false }; + unsigned long flags; + spin_lock_irqsave(&bios->lock, flags); bios->display.output = dcbent; parse_init_table(bios, table, &iexec); bios->display.output = NULL; + spin_unlock_irqrestore(&bios->lock, flags); } static bool NVInitVBIOS(struct drm_device *dev) @@ -5876,6 +5876,7 @@ static bool NVInitVBIOS(struct drm_device *dev) struct nvbios *bios = &dev_priv->VBIOS; memset(bios, 0, sizeof(struct nvbios)); + spin_lock_init(&bios->lock); bios->dev = dev; if (!NVShadowVBIOS(dev, bios->data)) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 058e98c..68446fd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -205,6 +205,8 @@ struct nvbios { struct drm_device *dev; struct nouveau_bios_info pub; + spinlock_t lock; + uint8_t data[NV_PROM_SIZE]; unsigned int length; bool execute; -- cgit v0.10.2 From 5025b43120b629bdf11087a3c652dc9cbe172191 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 9 Feb 2010 12:30:35 +1000 Subject: drm/nv50: disregard dac outputs in nv50_sor_dpms() Fixes DVI+VGA on my 9400, and likely a lot of other configurations that got broken by the previos DVI-over-DP fix. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index ecf1936..c2fff54 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -101,6 +101,7 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) struct nouveau_encoder *nvenc = nouveau_encoder(enc); if (nvenc == nv_encoder || + nvenc->disconnect != nv50_sor_disconnect || nvenc->dcb->or != nv_encoder->dcb->or) continue; -- cgit v0.10.2 From eb1dba0ebaa5b7642b323fac148f9947522a48a8 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Sun, 27 Dec 2009 12:22:07 +0100 Subject: drm/nv50: align size of buffer object to the right boundaries. - In the current situation the padding that is added is dangerous to write to, userspace could potentially overwrite parts of another bo. - Depth and stencil buffers are supposed to be large enough in general so the waste of memory should be acceptable. - Alternatives are hiding the padding from users or splitting vram into 2 zones. Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index db0ed4c..028719f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -65,8 +65,10 @@ nouveau_bo_fixup_align(struct drm_device *dev, /* * Some of the tile_flags have a periodic structure of N*4096 bytes, - * align to to that as well as the page size. Overallocate memory to - * avoid corruption of other buffer objects. + * align to to that as well as the page size. Align the size to the + * appropriate boundaries. This does imply that sizes are rounded up + * 3-7 pages, so be aware of this and do not waste memory by allocating + * many small buffers. */ if (dev_priv->card_type == NV_50) { uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15; @@ -77,22 +79,20 @@ nouveau_bo_fixup_align(struct drm_device *dev, case 0x2800: case 0x4800: case 0x7a00: - *size = roundup(*size, block_size); if (is_power_of_2(block_size)) { - *size += 3 * block_size; for (i = 1; i < 10; i++) { *align = 12 * i * block_size; if (!(*align % 65536)) break; } } else { - *size += 6 * block_size; for (i = 1; i < 10; i++) { *align = 8 * i * block_size; if (!(*align % 65536)) break; } } + *size = roundup(*size, *align); break; default: break; -- cgit v0.10.2 From a51a3bf50d41708388f51ce63d965c0e77726eab Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Mon, 1 Feb 2010 18:32:09 +0100 Subject: drm/nv50: avoid unloading pgraph context when ctxprog is running - We need to disable pgraph fifo access before checking the current channel, otherwise we could still hit a running ctxprog. - The writes to 0x400500 are already handled by pgraph->fifo_access and are therefore redundant, moreover pgraph fifo access should not be reenabled before current context is set as invalid. So remove them altogether. Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 343d718..2281f99 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -278,12 +278,11 @@ nouveau_channel_free(struct nouveau_channel *chan) /* Ensure the channel is no longer active on the GPU */ pfifo->reassign(dev, false); - if (pgraph->channel(dev) == chan) { - pgraph->fifo_access(dev, false); + pgraph->fifo_access(dev, false); + if (pgraph->channel(dev) == chan) pgraph->unload_context(dev); - pgraph->fifo_access(dev, true); - } pgraph->destroy_context(chan); + pgraph->fifo_access(dev, true); if (pfifo->channel_id(dev) == chan->id) { pfifo->disable(dev); diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 20319e5..6d50480 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -165,6 +165,12 @@ nv50_graph_channel(struct drm_device *dev) uint32_t inst; int i; + /* Be sure we're not in the middle of a context switch or bad things + * will happen, such as unloading the wrong pgraph context. + */ + if (!nv_wait(0x400300, 0x00000001, 0x00000000)) + NV_ERROR(dev, "Ctxprog is still running\n"); + inst = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR); if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED)) return NULL; @@ -275,7 +281,7 @@ nv50_graph_load_context(struct nouveau_channel *chan) int nv50_graph_unload_context(struct drm_device *dev) { - uint32_t inst, fifo = nv_rd32(dev, 0x400500); + uint32_t inst; inst = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR); if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED)) @@ -283,12 +289,10 @@ nv50_graph_unload_context(struct drm_device *dev) inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE; nouveau_wait_for_idle(dev); - nv_wr32(dev, 0x400500, fifo & ~1); nv_wr32(dev, 0x400784, inst); nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20); nv_wr32(dev, 0x400304, nv_rd32(dev, 0x400304) | 0x01); nouveau_wait_for_idle(dev); - nv_wr32(dev, 0x400500, fifo); nv_wr32(dev, NV50_PGRAPH_CTXCTL_CUR, inst); return 0; -- cgit v0.10.2 From a87ff62a80a6a65fc664cd410061910b8c52b896 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Mon, 1 Feb 2010 18:47:52 +0100 Subject: drm/nv50: delete ramfc object after disabling fifo, not before ramfc is zero'ed upon destruction, so it's safer to do things in the right order. Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index 32b244b..204a79f 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -317,17 +317,20 @@ void nv50_fifo_destroy_context(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; + struct nouveau_gpuobj_ref *ramfc = chan->ramfc; NV_DEBUG(dev, "ch%d\n", chan->id); - nouveau_gpuobj_ref_del(dev, &chan->ramfc); - nouveau_gpuobj_ref_del(dev, &chan->cache); - + /* This will ensure the channel is seen as disabled. */ + chan->ramfc = NULL; nv50_fifo_channel_disable(dev, chan->id, false); /* Dummy channel, also used on ch 127 */ if (chan->id == 0) nv50_fifo_channel_disable(dev, 127, false); + + nouveau_gpuobj_ref_del(dev, &ramfc); + nouveau_gpuobj_ref_del(dev, &chan->cache); } int -- cgit v0.10.2 From b1d37aa0aa43c5bf857364093ab2191acd37f2ec Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Wed, 20 Jan 2010 19:54:34 +0100 Subject: drm/nv50: make the pgraph irq handler loop like the pre-nv50 version Unset the bit that indicates that a ctxprog can continue at the end. Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index baa9b3e..447f9f6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -580,86 +580,99 @@ nouveau_pgraph_irq_handler(struct drm_device *dev) static void nv50_pgraph_irq_handler(struct drm_device *dev) { - uint32_t status, nsource; + uint32_t status; - status = nv_rd32(dev, NV03_PGRAPH_INTR); - nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE); + while ((status = nv_rd32(dev, NV03_PGRAPH_INTR))) { + uint32_t nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE); - if (status & 0x00000001) { - nouveau_pgraph_intr_notify(dev, nsource); - status &= ~0x00000001; - nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001); - } + if (status & 0x00000001) { + nouveau_pgraph_intr_notify(dev, nsource); + status &= ~0x00000001; + nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001); + } - if (status & 0x00000010) { - nouveau_pgraph_intr_error(dev, nsource | - NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD); + if (status & 0x00000010) { + nouveau_pgraph_intr_error(dev, nsource | + NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD); - status &= ~0x00000010; - nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010); - } + status &= ~0x00000010; + nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010); + } - if (status & 0x00001000) { - nv_wr32(dev, 0x400500, 0x00000000); - nv_wr32(dev, NV03_PGRAPH_INTR, NV_PGRAPH_INTR_CONTEXT_SWITCH); - nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev, - NV40_PGRAPH_INTR_EN) & ~NV_PGRAPH_INTR_CONTEXT_SWITCH); - nv_wr32(dev, 0x400500, 0x00010001); + if (status & 0x00001000) { + nv_wr32(dev, 0x400500, 0x00000000); + nv_wr32(dev, NV03_PGRAPH_INTR, + NV_PGRAPH_INTR_CONTEXT_SWITCH); + nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev, + NV40_PGRAPH_INTR_EN) & + ~NV_PGRAPH_INTR_CONTEXT_SWITCH); + nv_wr32(dev, 0x400500, 0x00010001); - nv50_graph_context_switch(dev); + nv50_graph_context_switch(dev); - status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH; - } + status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH; + } - if (status & 0x00100000) { - nouveau_pgraph_intr_error(dev, nsource | - NV03_PGRAPH_NSOURCE_DATA_ERROR); + if (status & 0x00100000) { + nouveau_pgraph_intr_error(dev, nsource | + NV03_PGRAPH_NSOURCE_DATA_ERROR); - status &= ~0x00100000; - nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000); - } + status &= ~0x00100000; + nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000); + } - if (status & 0x00200000) { - int r; - - nouveau_pgraph_intr_error(dev, nsource | - NV03_PGRAPH_NSOURCE_PROTECTION_ERROR); - - NV_ERROR(dev, "magic set 1:\n"); - for (r = 0x408900; r <= 0x408910; r += 4) - NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r)); - nv_wr32(dev, 0x408900, nv_rd32(dev, 0x408904) | 0xc0000000); - for (r = 0x408e08; r <= 0x408e24; r += 4) - NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r)); - nv_wr32(dev, 0x408e08, nv_rd32(dev, 0x408e08) | 0xc0000000); - - NV_ERROR(dev, "magic set 2:\n"); - for (r = 0x409900; r <= 0x409910; r += 4) - NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r)); - nv_wr32(dev, 0x409900, nv_rd32(dev, 0x409904) | 0xc0000000); - for (r = 0x409e08; r <= 0x409e24; r += 4) - NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r)); - nv_wr32(dev, 0x409e08, nv_rd32(dev, 0x409e08) | 0xc0000000); - - status &= ~0x00200000; - nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource); - nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000); - } + if (status & 0x00200000) { + int r; + + nouveau_pgraph_intr_error(dev, nsource | + NV03_PGRAPH_NSOURCE_PROTECTION_ERROR); + + NV_ERROR(dev, "magic set 1:\n"); + for (r = 0x408900; r <= 0x408910; r += 4) + NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, + nv_rd32(dev, r)); + nv_wr32(dev, 0x408900, + nv_rd32(dev, 0x408904) | 0xc0000000); + for (r = 0x408e08; r <= 0x408e24; r += 4) + NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, + nv_rd32(dev, r)); + nv_wr32(dev, 0x408e08, + nv_rd32(dev, 0x408e08) | 0xc0000000); + + NV_ERROR(dev, "magic set 2:\n"); + for (r = 0x409900; r <= 0x409910; r += 4) + NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, + nv_rd32(dev, r)); + nv_wr32(dev, 0x409900, + nv_rd32(dev, 0x409904) | 0xc0000000); + for (r = 0x409e08; r <= 0x409e24; r += 4) + NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, + nv_rd32(dev, r)); + nv_wr32(dev, 0x409e08, + nv_rd32(dev, 0x409e08) | 0xc0000000); + + status &= ~0x00200000; + nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource); + nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000); + } - if (status) { - NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n", status); - nv_wr32(dev, NV03_PGRAPH_INTR, status); - } + if (status) { + NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n", + status); + nv_wr32(dev, NV03_PGRAPH_INTR, status); + } - { - const int isb = (1 << 16) | (1 << 0); + { + const int isb = (1 << 16) | (1 << 0); - if ((nv_rd32(dev, 0x400500) & isb) != isb) - nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb); - nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31)); + if ((nv_rd32(dev, 0x400500) & isb) != isb) + nv_wr32(dev, 0x400500, + nv_rd32(dev, 0x400500) | isb); + } } nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING); + nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31)); } static void -- cgit v0.10.2 From cf9db6c41f739a294286847aab1e85f39aef1781 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 8 Feb 2010 20:35:02 -0600 Subject: x86-32: Make AT_VECTOR_SIZE_ARCH=2 Both x86-32 and x86-64 with 32-bit compat use ARCH_DLINFO_IA32, which defines two saved_auxv entries. But system.h only defines AT_VECTOR_SIZE_ARCH as 2 for CONFIG_IA32_EMULATION, not for CONFIG_X86_32. Fix that. Signed-off-by: Serge E. Hallyn LKML-Reference: <20100209023502.GA15408@us.ibm.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index ecb544e..e04740f 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -11,9 +11,9 @@ #include /* entries in ARCH_DLINFO: */ -#ifdef CONFIG_IA32_EMULATION +#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64) # define AT_VECTOR_SIZE_ARCH 2 -#else +#else /* else it's non-compat x86-64 */ # define AT_VECTOR_SIZE_ARCH 1 #endif -- cgit v0.10.2 From f036d9f3985a529a81e582f68aa984eb7b20d54d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 9 Feb 2010 16:18:40 -0800 Subject: sparc: Align clone and signal stacks to 16 bytes. This is mandatory for 64-bit processes, and doing it also for 32-bit processes saves a conditional in the compat case. This fixes the glibc/nptl/tst-stdio1 test case, as well as many others, on 64-bit. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c index 2830b41..f23c8fd 100644 --- a/arch/sparc/kernel/process_32.c +++ b/arch/sparc/kernel/process_32.c @@ -526,7 +526,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, * Set some valid stack frames to give to the child. */ childstack = (struct sparc_stackf __user *) - (sp & ~0x7UL); + (sp & ~0x15UL); parentstack = (struct sparc_stackf __user *) regs->u_regs[UREG_FP]; diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index 18d6785..6679eeb 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -406,11 +406,11 @@ static unsigned long clone_stackframe(unsigned long csp, unsigned long psp) } else __get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6])); - /* Now 8-byte align the stack as this is mandatory in the - * Sparc ABI due to how register windows work. This hides - * the restriction from thread libraries etc. -DaveM + /* Now align the stack as this is mandatory in the Sparc ABI + * due to how register windows work. This hides the + * restriction from thread libraries etc. */ - csp &= ~7UL; + csp &= ~15UL; distance = fp - psp; rval = (csp - distance); diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index ba5b09a..ea22cd3 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -120,8 +120,8 @@ struct rt_signal_frame32 { }; /* Align macros */ -#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 7) & (~7))) -#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 7) & (~7))) +#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15))) +#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15))) int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { @@ -420,15 +420,17 @@ static void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, uns sp = current->sas_ss_sp + current->sas_ss_size; } + sp -= framesize; + /* Always align the stack frame. This handles two cases. First, * sigaltstack need not be mindful of platform specific stack * alignment. Second, if we took this signal because the stack * is not aligned properly, we'd like to take the signal cleanly * and report that. */ - sp &= ~7UL; + sp &= ~15UL; - return (void __user *)(sp - framesize); + return (void __user *) sp; } static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 7ce1a10..9882df9 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -267,15 +267,17 @@ static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *re sp = current->sas_ss_sp + current->sas_ss_size; } + sp -= framesize; + /* Always align the stack frame. This handles two cases. First, * sigaltstack need not be mindful of platform specific stack * alignment. Second, if we took this signal because the stack * is not aligned properly, we'd like to take the signal cleanly * and report that. */ - sp &= ~7UL; + sp &= ~15UL; - return (void __user *)(sp - framesize); + return (void __user *) sp; } static inline int diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 647afbd..9fa48c3 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -353,7 +353,7 @@ segv: /* Checks if the fp is valid */ static int invalid_frame_pointer(void __user *fp, int fplen) { - if (((unsigned long) fp) & 7) + if (((unsigned long) fp) & 15) return 1; return 0; } @@ -396,15 +396,17 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs * sp = current->sas_ss_sp + current->sas_ss_size; } + sp -= framesize; + /* Always align the stack frame. This handles two cases. First, * sigaltstack need not be mindful of platform specific stack * alignment. Second, if we took this signal because the stack * is not aligned properly, we'd like to take the signal cleanly * and report that. */ - sp &= ~7UL; + sp &= ~15UL; - return (void __user *)(sp - framesize); + return (void __user *) sp; } static inline void -- cgit v0.10.2 From ef286f6fa673cd7fb367e1b145069d8dbfcc6081 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Feb 2010 16:34:14 +1100 Subject: md: fix some lockdep issues between md and sysfs. ====== This fix is related to http://bugzilla.kernel.org/show_bug.cgi?id=15142 but does not address that exact issue. ====== sysfs does like attributes being removed while they are being accessed (i.e. read or written) and waits for the access to complete. As accessing some md attributes takes the same lock that is held while removing those attributes a deadlock can occur. This patch addresses 3 issues in md that could lead to this deadlock. Two relate to calling flush_scheduled_work while the lock is held. This is probably a bad idea in general and as we use schedule_work to delete various sysfs objects it is particularly bad. In one case flush_scheduled_work is called from md_alloc (called by md_probe) called from do_md_run which holds the lock. This call is only present to ensure that ->gendisk is set. However we can be sure that gendisk is always set (though possibly we couldn't when that code was originally written. This is because do_md_run is called in three different contexts: 1/ from md_ioctl. This requires that md_open has succeeded, and it fails if ->gendisk is not set. 2/ from writing a sysfs attribute. This can only happen if the mddev has been registered in sysfs which happens in md_alloc after ->gendisk has been set. 3/ from autorun_array which is only called by autorun_devices, which checks for ->gendisk to be set before calling autorun_array. So the call to md_probe in do_md_run can be removed, and the check on ->gendisk can also go. In the other case flush_scheduled_work is being called in do_md_stop, purportedly to wait for all md_delayed_delete calls (which delete the component rdevs) to complete. However there really isn't any need to wait for them - they have already been disconnected in all important ways. The third issue is that raid5->stop() removes some attribute names while the lock is held. There is already some infrastructure in place to delay attribute removal until after the lock is released (using schedule_work). So extend that infrastructure to remove the raid5_attrs_group. This does not address all lockdep issues related to the sysfs "s_active" lock. The rest can be address by splitting that lockdep context between symlinks and non-symlinks which hopefully will happen. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index dd3dfe4..a20a71e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4075,8 +4075,10 @@ static void mddev_delayed_delete(struct work_struct *ws) { mddev_t *mddev = container_of(ws, mddev_t, del_work); - if (mddev->private == &md_redundancy_group) { + if (mddev->private) { sysfs_remove_group(&mddev->kobj, &md_redundancy_group); + if (mddev->private != (void*)1) + sysfs_remove_group(&mddev->kobj, mddev->private); if (mddev->sysfs_action) sysfs_put(mddev->sysfs_action); mddev->sysfs_action = NULL; @@ -4287,10 +4289,7 @@ static int do_md_run(mddev_t * mddev) sysfs_notify_dirent(rdev->sysfs_state); } - md_probe(mddev->unit, NULL, NULL); disk = mddev->gendisk; - if (!disk) - return -ENOMEM; spin_lock(&pers_lock); pers = find_pers(mddev->level, mddev->clevel); @@ -4530,8 +4529,8 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mddev->queue->unplug_fn = NULL; mddev->queue->backing_dev_info.congested_fn = NULL; module_put(mddev->pers->owner); - if (mddev->pers->sync_request) - mddev->private = &md_redundancy_group; + if (mddev->pers->sync_request && mddev->private == NULL) + mddev->private = (void*)1; mddev->pers = NULL; /* tell userspace to handle 'inactive' */ sysfs_notify_dirent(mddev->sysfs_state); @@ -4578,9 +4577,6 @@ out: } mddev->bitmap_info.offset = 0; - /* make sure all md_delayed_delete calls have finished */ - flush_scheduled_work(); - export_array(mddev); mddev->array_sectors = 0; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b5629c3..ceb24af 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5136,9 +5136,8 @@ static int stop(mddev_t *mddev) mddev->thread = NULL; mddev->queue->backing_dev_info.congested_fn = NULL; blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/ - sysfs_remove_group(&mddev->kobj, &raid5_attrs_group); free_conf(conf); - mddev->private = NULL; + mddev->private = &raid5_attrs_group; return 0; } -- cgit v0.10.2 From 77058e1adcc439151db41f2b84e4867a88113cd8 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Mon, 8 Feb 2010 20:09:03 +0000 Subject: powerpc: Fix address masking bug in hpte_need_flush() Commit f71dc176aa06359681c30ba6877ffccab6fba3a6 'Make hpte_need_flush() correctly mask for multiple page sizes' introduced bug, which is triggered when a kernel with a 64k base page size is run on a system whose hardware does not 64k hash PTEs. In this case, we emulate 64k pages with multiple 4k hash PTEs, however in hpte_need_flush() we incorrectly only mask the hardware page size from the address, instead of the logical page size. This causes things to go wrong when we later attempt to iterate through the hardware subpages of the logical page. This patch corrects the error. It has been tested on pSeries bare metal by Michael Neuling. Signed-off-by: David Gibson Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 282d930..1ec0657 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -63,15 +63,21 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, if (huge) { #ifdef CONFIG_HUGETLB_PAGE psize = get_slice_psize(mm, addr); + /* Mask the address for the correct page size */ + addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1); #else BUG(); psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ #endif - } else + } else { psize = pte_pagesize_index(mm, addr, pte); + /* Mask the address for the standard page size. If we + * have a 64k page kernel, but the hardware does not + * support 64k pages, this might be different from the + * hardware page size encoded in the slice table. */ + addr &= PAGE_MASK; + } - /* Mask the address for the correct page size */ - addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1); /* Build full vaddr */ if (!is_kernel_addr(addr)) { -- cgit v0.10.2 From 681ee44d40d7c93b42118320e4620d07d8704fd6 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 9 Feb 2010 18:01:44 -0800 Subject: x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. [ hpa: incorporated function annotation feedback from Yinghai Lu ] Signed-off-by: Suresh Siddha LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com> Acked-by: Shaohui Zheng Reviewed-by: Yinghai Lu Cc: Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 036d28a..0acbcdf 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1185,9 +1185,6 @@ static void __init acpi_process_madt(void) if (!error) { acpi_lapic = 1; -#ifdef CONFIG_X86_BIGSMP - generic_bigsmp_probe(); -#endif /* * Parse MADT IO-APIC entries */ @@ -1197,8 +1194,6 @@ static void __init acpi_process_madt(void) acpi_ioapic = 1; smp_found_config = 1; - if (apic->setup_apic_routing) - apic->setup_apic_routing(); } } if (error == -EINVAL) { diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3987e44..dfca210 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1641,9 +1641,7 @@ int __init APIC_init_uniprocessor(void) #endif enable_IR_x2apic(); -#ifdef CONFIG_X86_64 default_setup_apic_routing(); -#endif verify_local_APIC(); connect_bsp_APIC(); @@ -1891,21 +1889,6 @@ void __cpuinit generic_processor_info(int apicid, int version) if (apicid > max_physical_apicid) max_physical_apicid = apicid; -#ifdef CONFIG_X86_32 - if (num_processors > 8) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (!APIC_XAPIC(version)) { - def_to_bigsmp = 0; - break; - } - /* If P4 and above fall through */ - case X86_VENDOR_AMD: - def_to_bigsmp = 1; - } - } -#endif - #if defined(CONFIG_SMP) || defined(CONFIG_X86_64) early_per_cpu(x86_cpu_to_apicid, cpu) = apicid; early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid; diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 1a6559f..99d2fe0 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -52,7 +52,32 @@ static int __init print_ipi_mode(void) } late_initcall(print_ipi_mode); -void default_setup_apic_routing(void) +void __init default_setup_apic_routing(void) +{ + int version = apic_version[boot_cpu_physical_apicid]; + + if (num_possible_cpus() > 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } + +#ifdef CONFIG_X86_BIGSMP + generic_bigsmp_probe(); +#endif + + if (apic->setup_apic_routing) + apic->setup_apic_routing(); +} + +static void setup_apic_flat_routing(void) { #ifdef CONFIG_X86_IO_APIC printk(KERN_INFO @@ -103,7 +128,7 @@ struct apic apic_default = { .init_apic_ldr = default_init_apic_ldr, .ioapic_phys_id_map = default_ioapic_phys_id_map, - .setup_apic_routing = default_setup_apic_routing, + .setup_apic_routing = setup_apic_flat_routing, .multi_timer_check = NULL, .apicid_to_node = default_apicid_to_node, .cpu_to_logical_apicid = default_cpu_to_logical_apicid, diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index 450fe20..83e9be4 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void) } #endif - if (apic == &apic_flat && num_processors > 8) + if (apic == &apic_flat && num_possible_cpus() > 8) apic = &apic_physflat; printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 40b54ce..a2c1edd 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -359,13 +359,6 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) x86_init.mpparse.mpc_record(1); } -#ifdef CONFIG_X86_BIGSMP - generic_bigsmp_probe(); -#endif - - if (apic->setup_apic_routing) - apic->setup_apic_routing(); - if (!num_processors) printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 678d0b8..b4e870c 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1083,9 +1083,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) set_cpu_sibling_map(0); enable_IR_x2apic(); -#ifdef CONFIG_X86_64 default_setup_apic_routing(); -#endif if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); -- cgit v0.10.2 From f79f11852831ba8837e82b73364e6f1cd0145499 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Feb 2010 16:14:04 +0100 Subject: compat_ioctl: ignore RAID_VERSION ioctl md ioctls are now handled by the md driver itself, but mdadm may call RAID_VERSION on other devices as well. Mark the command as IGNORE_IOCTL so this fails silently rather than printing an annoying message. Reported-by: "Michael S. Tsirkin" Cc: "Rafael J. Wysocki" Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index c5c45de..b6f23b2 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1038,6 +1038,8 @@ COMPATIBLE_IOCTL(FIOQSIZE) #ifdef CONFIG_BLOCK /* loop */ IGNORE_IOCTL(LOOP_CLR_FD) +/* md calls this on random blockdevs */ +IGNORE_IOCTL(RAID_VERSION) /* SG stuff */ COMPATIBLE_IOCTL(SG_SET_TIMEOUT) COMPATIBLE_IOCTL(SG_GET_TIMEOUT) -- cgit v0.10.2 From a6c7fdd29350a74ba5f76809436de9c3d6763009 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 4 Feb 2010 13:06:59 +0200 Subject: OMAP: hsmmc: fix memory leak The platform data allocated with kmalloc() will become unreachable once the init is complete, so it should be freed. The problem was discovered by kmemleak. Signed-off-by: Aaro Koskinen Acked-by: Adrian Hunter Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 0c3c72d..8afe9dd 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) { struct twl4030_hsmmc_info *c; int nr_hsmmc = ARRAY_SIZE(hsmmc_data); + int i; if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; @@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); if (!mmc) { pr_err("Cannot allocate memory for mmc device!\n"); - return; + goto done; } if (c->name) @@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) continue; c->dev = mmc->dev; } + +done: + for (i = 0; i < nr_hsmmc; i++) + kfree(hsmmc_data[i]); } #endif -- cgit v0.10.2 From 174b24963eaf96dc5e093502ee09639aed13eb2f Mon Sep 17 00:00:00 2001 From: Jelle Martijn Kok Date: Wed, 10 Feb 2010 09:34:09 -0600 Subject: rtl8187: Add new device ID Add new RTL8187B device. Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bc5726d..7ba3052 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -65,6 +65,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B}, /* Sphairon Access Systems GmbH */ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187}, /* Dick Smith Electronics */ -- cgit v0.10.2 From d6cade0f7f40834ff3b48f2469d00b1be0ea0db6 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Tue, 9 Feb 2010 23:37:54 +0000 Subject: via-velocity: Remove unused IRQ status parameter from rx_srv and tx_srv Signed-off-by: Simon Kagstrom Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index c93f58f..1330697 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1877,13 +1877,12 @@ static void velocity_error(struct velocity_info *vptr, int status) /** * tx_srv - transmit interrupt service * @vptr; Velocity - * @status: * * Scan the queues looking for transmitted packets that * we can complete and clean up. Update any statistics as * necessary/ */ -static int velocity_tx_srv(struct velocity_info *vptr, u32 status) +static int velocity_tx_srv(struct velocity_info *vptr) { struct tx_desc *td; int qnum; @@ -2090,14 +2089,12 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) /** * velocity_rx_srv - service RX interrupt * @vptr: velocity - * @status: adapter status (unused) * * Walk the receive ring of the velocity adapter and remove * any received packets from the receive queue. Hand the ring * slots back to the adapter for reuse. */ -static int velocity_rx_srv(struct velocity_info *vptr, int status, - int budget_left) +static int velocity_rx_srv(struct velocity_info *vptr, int budget_left) { struct net_device_stats *stats = &vptr->dev->stats; int rd_curr = vptr->rx.curr; @@ -2165,10 +2162,10 @@ static int velocity_poll(struct napi_struct *napi, int budget) * Do rx and tx twice for performance (taken from the VIA * out-of-tree driver). */ - rx_done = velocity_rx_srv(vptr, isr_status, budget / 2); - velocity_tx_srv(vptr, isr_status); - rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done); - velocity_tx_srv(vptr, isr_status); + rx_done = velocity_rx_srv(vptr, budget / 2); + velocity_tx_srv(vptr); + rx_done += velocity_rx_srv(vptr, budget - rx_done); + velocity_tx_srv(vptr); spin_unlock(&vptr->lock); @@ -3100,7 +3097,7 @@ static int velocity_resume(struct pci_dev *pdev) velocity_init_registers(vptr, VELOCITY_INIT_WOL); mac_disable_int(vptr->mac_regs); - velocity_tx_srv(vptr, 0); + velocity_tx_srv(vptr); for (i = 0; i < vptr->tx.numq; i++) { if (vptr->tx.used[i]) -- cgit v0.10.2 From 39c2ff43ea3830ccc693f965abdace96e514b1c5 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Tue, 9 Feb 2010 23:38:07 +0000 Subject: via-velocity: Take spinlock on set coalesce velocity_set_coalesce touches ISR and some other sensitive registers not covered by the rtnl lock, so take the velocity spinlock. Signed-off-by: Simon Kagstrom Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 1330697..54bafda 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -3341,6 +3341,7 @@ static int velocity_set_coalesce(struct net_device *dev, { struct velocity_info *vptr = netdev_priv(dev); int max_us = 0x3f * 64; + unsigned long flags; /* 6 bits of */ if (ecmd->tx_coalesce_usecs > max_us) @@ -3362,6 +3363,7 @@ static int velocity_set_coalesce(struct net_device *dev, ecmd->tx_coalesce_usecs); /* Setup the interrupt suppression and queue timers */ + spin_lock_irqsave(&vptr->lock, flags); mac_disable_int(vptr->mac_regs); setup_adaptive_interrupts(vptr); setup_queue_timers(vptr); @@ -3369,6 +3371,7 @@ static int velocity_set_coalesce(struct net_device *dev, mac_write_int_mask(vptr->int_mask, vptr->mac_regs); mac_clear_isr(vptr->mac_regs); mac_enable_int(vptr->mac_regs); + spin_unlock_irqrestore(&vptr->lock, flags); return 0; } -- cgit v0.10.2 From 3f2e8d9f13246382fbda6f03178eef867a9bfbe2 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Tue, 9 Feb 2010 23:38:25 +0000 Subject: via-velocity: Fix races on shared interrupts This patch fixes two potential races in the velocity driver: * Move the ACK and error handler to the interrupt handler. This fixes a potential race with shared interrupts when the other device interrupts before the NAPI poll handler has finished. As the velocity driver hasn't acked it's own interrupt, it will then steal the interrupt from the other device. * Use spin_lock_irqsave in velocity_poll. In the current code, the interrupt handler will deadlock if e.g., the NAPI poll handler is executing when an interrupt (for another device) comes in since it tries to take the already held lock. Also unlock the spinlock only after enabling the interrupt in velocity_poll. The error path is moved to the interrupt handler since this is where the ISR is checked now. Signed-off-by: Simon Kagstrom Signed-off-by: Anders Grafstrom Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 54bafda..317aa34 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2148,16 +2148,9 @@ static int velocity_poll(struct napi_struct *napi, int budget) struct velocity_info *vptr = container_of(napi, struct velocity_info, napi); unsigned int rx_done; - u32 isr_status; - - spin_lock(&vptr->lock); - isr_status = mac_read_isr(vptr->mac_regs); - - /* Ack the interrupt */ - mac_write_isr(vptr->mac_regs, isr_status); - if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) - velocity_error(vptr, isr_status); + unsigned long flags; + spin_lock_irqsave(&vptr->lock, flags); /* * Do rx and tx twice for performance (taken from the VIA * out-of-tree driver). @@ -2167,13 +2160,12 @@ static int velocity_poll(struct napi_struct *napi, int budget) rx_done += velocity_rx_srv(vptr, budget - rx_done); velocity_tx_srv(vptr); - spin_unlock(&vptr->lock); - /* If budget not fully consumed, exit the polling mode */ if (rx_done < budget) { napi_complete(napi); mac_enable_int(vptr->mac_regs); } + spin_unlock_irqrestore(&vptr->lock, flags); return rx_done; } @@ -2203,10 +2195,17 @@ static irqreturn_t velocity_intr(int irq, void *dev_instance) return IRQ_NONE; } + /* Ack the interrupt */ + mac_write_isr(vptr->mac_regs, isr_status); + if (likely(napi_schedule_prep(&vptr->napi))) { mac_disable_int(vptr->mac_regs); __napi_schedule(&vptr->napi); } + + if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) + velocity_error(vptr, isr_status); + spin_unlock(&vptr->lock); return IRQ_HANDLED; -- cgit v0.10.2 From 8f98781e0f15207b6ab33bee1fae05428be0475b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 10 Feb 2010 17:32:38 +0100 Subject: async-tx: fix buffer submission error handling in ipu_idma.c If submitting new buffer failed, a wrong descriptor gets completed and it doesn't check, if a callback is at all defined, which can lead to an Oops. Fix these bugs and make ipu_update_channel_buffer() void, because it never fails. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 9a5bc1a..e80bae1 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -761,12 +761,10 @@ static void ipu_select_buffer(enum ipu_channel channel, int buffer_n) * @buffer_n: buffer number to update. * 0 or 1 are the only valid values. * @phyaddr: buffer physical address. - * @return: Returns 0 on success or negative error code on failure. This - * function will fail if the buffer is set to ready. */ /* Called under spin_lock(_irqsave)(&ichan->lock) */ -static int ipu_update_channel_buffer(struct idmac_channel *ichan, - int buffer_n, dma_addr_t phyaddr) +static void ipu_update_channel_buffer(struct idmac_channel *ichan, + int buffer_n, dma_addr_t phyaddr) { enum ipu_channel channel = ichan->dma_chan.chan_id; uint32_t reg; @@ -806,8 +804,6 @@ static int ipu_update_channel_buffer(struct idmac_channel *ichan, } spin_unlock_irqrestore(&ipu_data.lock, flags); - - return 0; } /* Called under spin_lock_irqsave(&ichan->lock) */ @@ -816,7 +812,6 @@ static int ipu_submit_buffer(struct idmac_channel *ichan, { unsigned int chan_id = ichan->dma_chan.chan_id; struct device *dev = &ichan->dma_chan.dev->device; - int ret; if (async_tx_test_ack(&desc->txd)) return -EINTR; @@ -827,14 +822,7 @@ static int ipu_submit_buffer(struct idmac_channel *ichan, * could make it conditional on status >= IPU_CHANNEL_ENABLED, but * doing it again shouldn't hurt either. */ - ret = ipu_update_channel_buffer(ichan, buf_idx, - sg_dma_address(sg)); - - if (ret < 0) { - dev_err(dev, "Updating sg %p on channel 0x%x buffer %d failed!\n", - sg, chan_id, buf_idx); - return ret; - } + ipu_update_channel_buffer(ichan, buf_idx, sg_dma_address(sg)); ipu_select_buffer(chan_id, buf_idx); dev_dbg(dev, "Updated sg %p on channel 0x%x buffer %d\n", @@ -1379,10 +1367,11 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) if (likely(sgnew) && ipu_submit_buffer(ichan, descnew, sgnew, ichan->active_buffer) < 0) { - callback = desc->txd.callback; - callback_param = desc->txd.callback_param; + callback = descnew->txd.callback; + callback_param = descnew->txd.callback_param; spin_unlock(&ichan->lock); - callback(callback_param); + if (callback) + callback(callback_param); spin_lock(&ichan->lock); } -- cgit v0.10.2 From 734c2992828c66cee3feb21ecd30a6ac44aecc51 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 6 Feb 2010 09:43:41 +0100 Subject: drivers/dma: Correct NULL test cohd_fin has already been verified not to be NULL, so the argument to BUG_ON cannot be true. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // Signed-off-by: Julia Lawall Acked-by: Linus Walleij Signed-off-by: Dan Williams diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index b5f2ee0..64a9372 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -613,8 +613,6 @@ static void dma_tasklet(unsigned long data) cohd_fin->pending_irqs--; cohc->completed = cohd_fin->desc.cookie; - BUG_ON(cohc->nbr_active_done && cohd_fin == NULL); - if (cohc->nbr_active_done == 0) return; -- cgit v0.10.2 From 8523c0480979080e8088e40f25459e5b2d19f621 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 8 Feb 2010 16:41:15 -0800 Subject: RDMA/cm: Revert association of an RDMA device when binding to loopback Revert the following change from commit 6f8372b6 ("RDMA/cm: fix loopback address support") The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdma_bind_addr, no device is associated with the rdma_cm_id. Fix this. It turns out that important apps such as Open MPI depend on rdma_bind_addr() NOT associating any RDMA device when binding to a loopback address. Open MPI is being updated to deal with this, but at least until a new Open MPI release is available, maintain the previous behavior: allow rdma_bind_addr() to succeed, but do not bind to a device. Signed-off-by: Sean Hefty Acked-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index cc9b594..875e34e 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2115,9 +2115,7 @@ int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr) if (ret) goto err1; - if (cma_loopback_addr(addr)) { - ret = cma_bind_loopback(id_priv); - } else if (!cma_zero_addr(addr)) { + if (!cma_any_addr(addr)) { ret = rdma_translate_ip(addr, &id->route.addr.dev_addr); if (ret) goto err1; -- cgit v0.10.2 From b91ad0ec52770dcb622b94fc1f57e076686f427a Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 5 Feb 2010 09:14:17 +0800 Subject: drm/i915: Rework DPLL calculation parameters for Ironlake Got Ironlake DPLL parameter table, which reflects the hardware optimized values. So this one trys to list DPLL parameters for different output types, should potential fix clock issue seen on new Arrandale CPUs. This fixes DPLL setting failure on one 1920x1080 dual channel LVDS for Ironlake. Test has also been made on LVDS panels with smaller size and CRT/HDMI/DP ports for different monitors on their all supported modes. Update: - Change name of double LVDS to dual LVDS. - Fix SSC 120M reference clock to use the right range. Cc: CSJ Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 12775df..7e9c835 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -240,33 +240,86 @@ struct intel_limit { #define IRONLAKE_DOT_MAX 350000 #define IRONLAKE_VCO_MIN 1760000 #define IRONLAKE_VCO_MAX 3510000 -#define IRONLAKE_N_MIN 1 -#define IRONLAKE_N_MAX 6 -#define IRONLAKE_M_MIN 79 -#define IRONLAKE_M_MAX 127 #define IRONLAKE_M1_MIN 12 #define IRONLAKE_M1_MAX 22 #define IRONLAKE_M2_MIN 5 #define IRONLAKE_M2_MAX 9 -#define IRONLAKE_P_SDVO_DAC_MIN 5 -#define IRONLAKE_P_SDVO_DAC_MAX 80 -#define IRONLAKE_P_LVDS_MIN 28 -#define IRONLAKE_P_LVDS_MAX 112 -#define IRONLAKE_P1_MIN 1 -#define IRONLAKE_P1_MAX 8 -#define IRONLAKE_P2_SDVO_DAC_SLOW 10 -#define IRONLAKE_P2_SDVO_DAC_FAST 5 -#define IRONLAKE_P2_LVDS_SLOW 14 /* single channel */ -#define IRONLAKE_P2_LVDS_FAST 7 /* double channel */ #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */ -#define IRONLAKE_P_DISPLAY_PORT_MIN 10 -#define IRONLAKE_P_DISPLAY_PORT_MAX 20 -#define IRONLAKE_P2_DISPLAY_PORT_FAST 10 -#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10 -#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0 -#define IRONLAKE_P1_DISPLAY_PORT_MIN 1 -#define IRONLAKE_P1_DISPLAY_PORT_MAX 2 +/* We have parameter ranges for different type of outputs. */ + +/* DAC & HDMI Refclk 120Mhz */ +#define IRONLAKE_DAC_N_MIN 1 +#define IRONLAKE_DAC_N_MAX 5 +#define IRONLAKE_DAC_M_MIN 79 +#define IRONLAKE_DAC_M_MAX 127 +#define IRONLAKE_DAC_P_MIN 5 +#define IRONLAKE_DAC_P_MAX 80 +#define IRONLAKE_DAC_P1_MIN 1 +#define IRONLAKE_DAC_P1_MAX 8 +#define IRONLAKE_DAC_P2_SLOW 10 +#define IRONLAKE_DAC_P2_FAST 5 + +/* LVDS single-channel 120Mhz refclk */ +#define IRONLAKE_LVDS_S_N_MIN 1 +#define IRONLAKE_LVDS_S_N_MAX 3 +#define IRONLAKE_LVDS_S_M_MIN 79 +#define IRONLAKE_LVDS_S_M_MAX 118 +#define IRONLAKE_LVDS_S_P_MIN 28 +#define IRONLAKE_LVDS_S_P_MAX 112 +#define IRONLAKE_LVDS_S_P1_MIN 2 +#define IRONLAKE_LVDS_S_P1_MAX 8 +#define IRONLAKE_LVDS_S_P2_SLOW 14 +#define IRONLAKE_LVDS_S_P2_FAST 14 + +/* LVDS dual-channel 120Mhz refclk */ +#define IRONLAKE_LVDS_D_N_MIN 1 +#define IRONLAKE_LVDS_D_N_MAX 3 +#define IRONLAKE_LVDS_D_M_MIN 79 +#define IRONLAKE_LVDS_D_M_MAX 127 +#define IRONLAKE_LVDS_D_P_MIN 14 +#define IRONLAKE_LVDS_D_P_MAX 56 +#define IRONLAKE_LVDS_D_P1_MIN 2 +#define IRONLAKE_LVDS_D_P1_MAX 8 +#define IRONLAKE_LVDS_D_P2_SLOW 7 +#define IRONLAKE_LVDS_D_P2_FAST 7 + +/* LVDS single-channel 100Mhz refclk */ +#define IRONLAKE_LVDS_S_SSC_N_MIN 1 +#define IRONLAKE_LVDS_S_SSC_N_MAX 2 +#define IRONLAKE_LVDS_S_SSC_M_MIN 79 +#define IRONLAKE_LVDS_S_SSC_M_MAX 126 +#define IRONLAKE_LVDS_S_SSC_P_MIN 28 +#define IRONLAKE_LVDS_S_SSC_P_MAX 112 +#define IRONLAKE_LVDS_S_SSC_P1_MIN 2 +#define IRONLAKE_LVDS_S_SSC_P1_MAX 8 +#define IRONLAKE_LVDS_S_SSC_P2_SLOW 14 +#define IRONLAKE_LVDS_S_SSC_P2_FAST 14 + +/* LVDS dual-channel 100Mhz refclk */ +#define IRONLAKE_LVDS_D_SSC_N_MIN 1 +#define IRONLAKE_LVDS_D_SSC_N_MAX 3 +#define IRONLAKE_LVDS_D_SSC_M_MIN 79 +#define IRONLAKE_LVDS_D_SSC_M_MAX 126 +#define IRONLAKE_LVDS_D_SSC_P_MIN 14 +#define IRONLAKE_LVDS_D_SSC_P_MAX 42 +#define IRONLAKE_LVDS_D_SSC_P1_MIN 2 +#define IRONLAKE_LVDS_D_SSC_P1_MAX 6 +#define IRONLAKE_LVDS_D_SSC_P2_SLOW 7 +#define IRONLAKE_LVDS_D_SSC_P2_FAST 7 + +/* DisplayPort */ +#define IRONLAKE_DP_N_MIN 1 +#define IRONLAKE_DP_N_MAX 2 +#define IRONLAKE_DP_M_MIN 81 +#define IRONLAKE_DP_M_MAX 90 +#define IRONLAKE_DP_P_MIN 10 +#define IRONLAKE_DP_P_MAX 20 +#define IRONLAKE_DP_P2_FAST 10 +#define IRONLAKE_DP_P2_SLOW 10 +#define IRONLAKE_DP_P2_LIMIT 0 +#define IRONLAKE_DP_P1_MIN 1 +#define IRONLAKE_DP_P1_MAX 2 static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, @@ -474,33 +527,78 @@ static const intel_limit_t intel_limits_pineview_lvds = { .find_pll = intel_find_best_PLL, }; -static const intel_limit_t intel_limits_ironlake_sdvo = { +static const intel_limit_t intel_limits_ironlake_dac = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_N_MIN, .max = IRONLAKE_N_MAX }, - .m = { .min = IRONLAKE_M_MIN, .max = IRONLAKE_M_MAX }, + .n = { .min = IRONLAKE_DAC_N_MIN, .max = IRONLAKE_DAC_N_MAX }, + .m = { .min = IRONLAKE_DAC_M_MIN, .max = IRONLAKE_DAC_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_P_SDVO_DAC_MIN, .max = IRONLAKE_P_SDVO_DAC_MAX }, - .p1 = { .min = IRONLAKE_P1_MIN, .max = IRONLAKE_P1_MAX }, + .p = { .min = IRONLAKE_DAC_P_MIN, .max = IRONLAKE_DAC_P_MAX }, + .p1 = { .min = IRONLAKE_DAC_P1_MIN, .max = IRONLAKE_DAC_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW, - .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST }, + .p2_slow = IRONLAKE_DAC_P2_SLOW, + .p2_fast = IRONLAKE_DAC_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; -static const intel_limit_t intel_limits_ironlake_lvds = { +static const intel_limit_t intel_limits_ironlake_single_lvds = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_N_MIN, .max = IRONLAKE_N_MAX }, - .m = { .min = IRONLAKE_M_MIN, .max = IRONLAKE_M_MAX }, + .n = { .min = IRONLAKE_LVDS_S_N_MIN, .max = IRONLAKE_LVDS_S_N_MAX }, + .m = { .min = IRONLAKE_LVDS_S_M_MIN, .max = IRONLAKE_LVDS_S_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_P_LVDS_MIN, .max = IRONLAKE_P_LVDS_MAX }, - .p1 = { .min = IRONLAKE_P1_MIN, .max = IRONLAKE_P1_MAX }, + .p = { .min = IRONLAKE_LVDS_S_P_MIN, .max = IRONLAKE_LVDS_S_P_MAX }, + .p1 = { .min = IRONLAKE_LVDS_S_P1_MIN, .max = IRONLAKE_LVDS_S_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_P2_LVDS_SLOW, - .p2_fast = IRONLAKE_P2_LVDS_FAST }, + .p2_slow = IRONLAKE_LVDS_S_P2_SLOW, + .p2_fast = IRONLAKE_LVDS_S_P2_FAST }, + .find_pll = intel_g4x_find_best_PLL, +}; + +static const intel_limit_t intel_limits_ironlake_dual_lvds = { + .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, + .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, + .n = { .min = IRONLAKE_LVDS_D_N_MIN, .max = IRONLAKE_LVDS_D_N_MAX }, + .m = { .min = IRONLAKE_LVDS_D_M_MIN, .max = IRONLAKE_LVDS_D_M_MAX }, + .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, + .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, + .p = { .min = IRONLAKE_LVDS_D_P_MIN, .max = IRONLAKE_LVDS_D_P_MAX }, + .p1 = { .min = IRONLAKE_LVDS_D_P1_MIN, .max = IRONLAKE_LVDS_D_P1_MAX }, + .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, + .p2_slow = IRONLAKE_LVDS_D_P2_SLOW, + .p2_fast = IRONLAKE_LVDS_D_P2_FAST }, + .find_pll = intel_g4x_find_best_PLL, +}; + +static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { + .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, + .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, + .n = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX }, + .m = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX }, + .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, + .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, + .p = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX }, + .p1 = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX }, + .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, + .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW, + .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST }, + .find_pll = intel_g4x_find_best_PLL, +}; + +static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { + .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, + .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, + .n = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX }, + .m = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX }, + .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, + .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, + .p = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX }, + .p1 = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX }, + .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, + .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW, + .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; @@ -509,34 +607,53 @@ static const intel_limit_t intel_limits_ironlake_display_port = { .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX}, - .n = { .min = IRONLAKE_N_MIN, - .max = IRONLAKE_N_MAX }, - .m = { .min = IRONLAKE_M_MIN, - .max = IRONLAKE_M_MAX }, + .n = { .min = IRONLAKE_DP_N_MIN, + .max = IRONLAKE_DP_N_MAX }, + .m = { .min = IRONLAKE_DP_M_MIN, + .max = IRONLAKE_DP_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN, - .max = IRONLAKE_P_DISPLAY_PORT_MAX }, - .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN, - .max = IRONLAKE_P1_DISPLAY_PORT_MAX}, - .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT, - .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW, - .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST }, + .p = { .min = IRONLAKE_DP_P_MIN, + .max = IRONLAKE_DP_P_MAX }, + .p1 = { .min = IRONLAKE_DP_P1_MIN, + .max = IRONLAKE_DP_P1_MAX}, + .p2 = { .dot_limit = IRONLAKE_DP_P2_LIMIT, + .p2_slow = IRONLAKE_DP_P2_SLOW, + .p2_fast = IRONLAKE_DP_P2_FAST }, .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) { + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits_ironlake_lvds; - else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + int refclk = 120; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100) + refclk = 100; + + if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) { + /* LVDS dual channel */ + if (refclk == 100) + limit = &intel_limits_ironlake_dual_lvds_100m; + else + limit = &intel_limits_ironlake_dual_lvds; + } else { + if (refclk == 100) + limit = &intel_limits_ironlake_single_lvds_100m; + else + limit = &intel_limits_ironlake_single_lvds; + } + } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || HAS_eDP) limit = &intel_limits_ironlake_display_port; else - limit = &intel_limits_ironlake_sdvo; + limit = &intel_limits_ironlake_dac; return limit; } -- cgit v0.10.2 From f4fc580bec5fb76560329c8c537b9b71d8d032b6 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Mon, 1 Feb 2010 17:10:55 +0800 Subject: MIPS: Fixup of the r4k timer As reported by Maxime Bizon, the commit "MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs" have broken the r4k timer since it didn't initialize the cp0_compare_irq_shift variable used in c0_compare_int_pending() on the architectures whose cpu_has_mips_r2 is false. This patch fixes it via initializing the cp0_compare_irq_shift as the cp0_compare_irq used in the old c0_compare_int_pending(). Reported-by: Maxime Bizon Signed-off-by: Wu Zhangjin Cc: David VomLehn Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/922/ Tested-by: Shane McDonald Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 338dfe8..31b204b 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1501,6 +1501,7 @@ void __cpuinit per_cpu_trap_init(void) cp0_perfcount_irq = -1; } else { cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; + cp0_compare_irq_shift = cp0_compare_irq; cp0_perfcount_irq = -1; } -- cgit v0.10.2 From 59d302b342e5d451c4448479e82e1105864a3112 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 3 Feb 2010 19:16:34 +0100 Subject: MIPS: IP27: Make defconfig useful again. RTC support was rewritten but the defconfig files were not updated. Enable IPv6 support which for some folks already is a must have. Assign useful values to other new options. Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index ed84b4c..84b6503 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Tue Aug 7 13:04:24 2007 +# Linux kernel version: 2.6.33-rc6 +# Wed Feb 3 18:12:31 2010 # CONFIG_MIPS=y @@ -9,20 +9,28 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set CONFIG_SGI_IP27=y +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -33,32 +41,39 @@ CONFIG_SGI_IP27=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_SGI_SN_M_MODE=y # CONFIG_SGI_SN_N_MODE is not set # CONFIG_MAPPED_KERNEL is not set # CONFIG_REPLICATE_KTEXT is not set # CONFIG_REPLICATE_EXHANDLERS is not set +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y CONFIG_DMA_COHERENT=y -CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_DEFAULT_SGI_PARTITION=y CONFIG_MIPS_L1_CACHE_SHIFT=7 CONFIG_ARC64=y CONFIG_BOOT_ELF64=y @@ -66,7 +81,8 @@ CONFIG_BOOT_ELF64=y # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -79,6 +95,7 @@ CONFIG_BOOT_ELF64=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -86,6 +103,7 @@ CONFIG_CPU_R10000=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_R10000=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -99,6 +117,7 @@ CONFIG_64BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y @@ -110,6 +129,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_NUMA=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_NODES_SHIFT=6 @@ -120,16 +140,22 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_64=y CONFIG_NR_CPUS=64 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -142,13 +168,13 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_MIPS_INSANE_LARGE is not set # CONFIG_KEXEC is not set CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -162,20 +188,41 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_GROUP_SCHED is not set CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y -CONFIG_SYSFS_DEPRECATED=y +CONFIG_PROC_PID_CPUSET=y +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -184,44 +231,92 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_CFQ_GROUP_IOSCHED is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -230,11 +325,10 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -242,8 +336,9 @@ CONFIG_MMU=y # Executable file formats # CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -255,13 +350,10 @@ CONFIG_BINFMT_ELF32=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set - -# -# Networking -# +# CONFIG_PM_RUNTIME is not set CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -273,6 +365,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -292,19 +386,40 @@ CONFIG_IP_PNP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -314,9 +429,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -326,12 +443,9 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y # # Queueing/Scheduling @@ -340,7 +454,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RR=m +CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -348,6 +462,7 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set CONFIG_NET_SCH_INGRESS=m # @@ -364,41 +479,63 @@ CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m # CONFIG_NET_ACT_SIMP is not set -CONFIG_NET_CLS_POLICE=y +CONFIG_NET_ACT_SKBEDIT=m # CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -CONFIG_CFG80211=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m -# CONFIG_MAC80211_DEBUG is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y # CONFIG_NET_9P is not set # @@ -408,9 +545,13 @@ CONFIG_RFKILL=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -423,14 +564,19 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_OSD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_EEPROM_93CX6=m +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -453,10 +599,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -471,11 +613,18 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m # CONFIG_SCSI_3W_9XXX is not set +CONFIG_SCSI_3W_SAS=m # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -483,11 +632,21 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set +CONFIG_SCSI_MVSAS=m +# CONFIG_SCSI_MVSAS_DEBUG is not set +CONFIG_SCSI_DPT_I2O=m +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set # CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -502,16 +661,31 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_PMCRAID=m +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m @@ -519,36 +693,39 @@ CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y CONFIG_IFB=m # CONFIG_DUMMY is not set # CONFIG_BONDING is not set CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_VETH=m # CONFIG_ARCNET is not set -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers @@ -562,23 +739,51 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m # CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=m CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_AX88796=m +CONFIG_AX88796_93CX6=y CONFIG_SGI_IOC3_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=m # CONFIG_DM9000 is not set +CONFIG_ETHOC=m +CONFIG_SMSC911X=m +CONFIG_DNET=m # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m +CONFIG_ATL2=m CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +CONFIG_E1000E=m +CONFIG_IP1000=m +CONFIG_IGB=m +CONFIG_IGBVF=m # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -588,24 +793,75 @@ CONFIG_NETDEV_1000=y # CONFIG_SKY2 is not set CONFIG_VIA_VELOCITY=m # CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set +CONFIG_BNX2=m +CONFIG_CNIC=m CONFIG_QLA3XXX=m # CONFIG_ATL1 is not set +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_JME=m CONFIG_NETDEV_10000=y +CONFIG_MDIO=m # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m +CONFIG_ENIC=m +CONFIG_IXGBE=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m -# CONFIG_MLX4_CORE is not set +CONFIG_NIU=m +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m +# CONFIG_MLX4_DEBUG is not set +CONFIG_TEHUTI=m +CONFIG_BNX2X=m +CONFIG_QLGE=m +CONFIG_SFC=m +CONFIG_BE2NET=m # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_RTL8180=m +CONFIG_ADM8211=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_MWL8K=m +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set +CONFIG_ATH5K=m +# CONFIG_ATH5K_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K=m +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y @@ -615,38 +871,57 @@ CONFIG_IPW2200_RADIOTAP=y CONFIG_IPW2200_PROMISCUOUS=y CONFIG_IPW2200_QOS=y CONFIG_IPW2200_DEBUG=y +CONFIG_LIBIPW=m +# CONFIG_LIBIPW_DEBUG is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y +# CONFIG_IWLWIFI_DEBUG is not set +CONFIG_IWLAGN=m +CONFIG_IWL4965=y +CONFIG_IWL5000=y +CONFIG_IWL3945=m +CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_DEBUG is not set CONFIG_HERMES=m +# CONFIG_HERMES_CACHE_FW_ON_INIT is not set CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCI_HERMES=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PRISM54=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_BCM43XX=m -CONFIG_BCM43XX_DEBUG=y -CONFIG_BCM43XX_DMA=y -CONFIG_BCM43XX_PIO=y -CONFIG_BCM43XX_DMA_AND_PIO_MODE=y -# CONFIG_BCM43XX_DMA_MODE is not set -# CONFIG_BCM43XX_PIO_MODE is not set +CONFIG_P54_COMMON=m +CONFIG_P54_PCI=m +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +CONFIG_RT2400PCI=m +CONFIG_RT2500PCI=m +CONFIG_RT61PCI=m +CONFIG_RT2800PCI_PCI=m +CONFIG_RT2800PCI=m +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_HT=y +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WL12XX=m +CONFIG_WL1251=m + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -664,13 +939,16 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=m CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_NOZOMI=m # # Serial drivers @@ -693,95 +971,258 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m -# CONFIG_RTC is not set +CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +CONFIG_I2C_ALI1535=m +CONFIG_I2C_ALI1563=m +CONFIG_I2C_ALI15X3=m +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=m +CONFIG_I2C_ISCH=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_SIS5595=m +CONFIG_I2C_SIS630=m +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m # -# SPI support +# I2C system bus drivers (mostly embedded / system-on-chip) # +CONFIG_I2C_OCORES=m +CONFIG_I2C_SIMTEC=m + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_PARPORT_LIGHT=m +CONFIG_I2C_TAOS_EVM=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_STUB=m + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_TSL2550=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=m +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB_DRIVER_MIPS is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=m +CONFIG_MFD_WM8350_I2C=m +CONFIG_MFD_PCF50633=m +CONFIG_PCF50633_ADC=m +CONFIG_PCF50633_GPIO=m +CONFIG_AB3100_CORE=m +CONFIG_AB3100_OTP=m +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_WM8350=m +CONFIG_LEDS_BD2802=m + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # -# DMA Engine support +# iptables trigger is under Netfilter config (LED target) # -# CONFIG_DMA_ENGINE is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Clients +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Devices +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + # +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=y +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_WM8350 is not set +# CONFIG_RTC_DRV_PCF50633 is not set +CONFIG_RTC_DRV_AB3100=m # -# Userspace I/O +# on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_CIF is not set +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +CONFIG_UIO_SMX=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set # # File systems @@ -792,36 +1233,58 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y -CONFIG_JBD_DEBUG=y +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set +CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -840,16 +1303,13 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -859,28 +1319,32 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set # CONFIG_ROOT_NFS is not set +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -910,35 +1374,37 @@ CONFIG_SGI_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set # @@ -947,65 +1413,140 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ABLKCIPHER=m +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_HIFN_795X=m +# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 63731c964d6cd9de4800891bd33b6f9e47a249bc Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 4 Feb 2010 15:48:49 -0800 Subject: MIPS: Fix __devinit __cpuinit confusion in cpu_cache_init cpu_cache_init and the things it calls should all be __cpuinit instead of __devinit. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/938/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 94e05e5..e06f1af 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -174,7 +174,7 @@ static void octeon_flush_cache_page(struct vm_area_struct *vma, * Probe Octeon's caches * */ -static void __devinit probe_octeon(void) +static void __cpuinit probe_octeon(void) { unsigned long icache_size; unsigned long dcache_size; @@ -235,7 +235,7 @@ static void __devinit probe_octeon(void) * Setup the Octeon cache flush routines * */ -void __devinit octeon_cache_init(void) +void __cpuinit octeon_cache_init(void) { extern unsigned long ebase; extern char except_vec2_octeon; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 102b2df..e716caf 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -155,7 +155,7 @@ static inline void setup_protection_map(void) protection_map[15] = PAGE_SHARED; } -void __devinit cpu_cache_init(void) +void __cpuinit cpu_cache_init(void) { if (cpu_has_3k_cache) { extern void __weak r3k_cache_init(void); -- cgit v0.10.2 From c2d5b5e525a354987b9c3de3661133f982bf9ba0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 6 Feb 2010 09:42:16 +0100 Subject: MIPS: SNI: Correct NULL test Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // Signed-off-by: Julia Lawall To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/945/ Acked-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 46f0069..31e2583 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -404,7 +404,7 @@ void __init sni_rm200_i8259_irqs(void) if (!rm200_pic_master) return; rm200_pic_slave = ioremap_nocache(0x160000a0, 4); - if (!rm200_pic_master) { + if (!rm200_pic_slave) { iounmap(rm200_pic_master); return; } -- cgit v0.10.2 From 5b7efa898b357e6ebe4024c520e62024eb969b5f Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 8 Feb 2010 12:27:00 -0800 Subject: MIPS: Don't probe reserved EntryHi bits. The patch that adds cpu_probe_vmbits is erroneously writing to reserved bit 12. Since we are really only probing high bits, don't write this bit with a one. Signed-off-by: David Daney To: linux-mips@linux-mips.org Cc: Guenter Roeck Patchwork: http://patchwork.linux-mips.org/patch/949/ Acked-by: Guenter Roeck Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 9c187a6..758ad42 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -287,9 +287,9 @@ static inline int __cpu_has_fpu(void) static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) { #ifdef __NEED_VMBITS_PROBE - write_c0_entryhi(0x3ffffffffffff000ULL); + write_c0_entryhi(0x3fffffffffffe000ULL); back_to_back_c0_hazard(); - c->vmbits = fls64(read_c0_entryhi() & 0x3ffffffffffff000ULL); + c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL); #endif } -- cgit v0.10.2 From 99fcb766a3a50466fe31d743260a3400c1aee855 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 7 Feb 2010 16:20:18 +0100 Subject: drm/i915: Update write_domains on active list after flush. Before changing the status of a buffer with a pending write we will await upon a new flush for that buffer. So we can take advantage of any flushes posted whilst the buffer is active and pending processing by the GPU, by clearing its write_domain and updating its last_rendering_seqno -- thus saving a potential flush in deep queues and improves flushing behaviour upon eviction for both GTT space and fences. In order to reduce the time spent searching the active list for matching write_domains, we move those to a separate list whose elements are the buffers belong to the active/flushing list with pending writes. Orignal patch by Chris Wilson , forward-ported by me. In addition to better performance, this also fixes a real bug. Before this changes, i915_gem_evict_everything didn't work as advertised. When the gpu was actually busy and processing request, the flush and subsequent wait would not move active and dirty buffers to the inactive list, but just to the flushing list. Which triggered the BUG_ON at the end of this function. With the more tight dirty buffer tracking, all currently busy and dirty buffers get moved to the inactive list by one i915_gem_flush operation. I've left the BUG_ON I've used to prove this in there. References: Bug 25911 - 2.10.0 causes kernel oops and system hangs http://bugs.freedesktop.org/show_bug.cgi?id=25911 Bug 26101 - [i915] xf86-video-intel 2.10.0 (and git) triggers kernel oops within seconds after login http://bugs.freedesktop.org/show_bug.cgi?id=26101 Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson Tested-by: Adam Lantos Cc: stable@kernel.org Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index aaf934d..b99b6a8 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -493,6 +493,15 @@ typedef struct drm_i915_private { struct list_head flushing_list; /** + * List of objects currently pending a GPU write flush. + * + * All elements on this list will belong to either the + * active_list or flushing_list, last_rendering_seqno can + * be used to differentiate between the two elements. + */ + struct list_head gpu_write_list; + + /** * LRU list of objects which are not in the ringbuffer and * are ready to unbind, but are still in the GTT. * @@ -592,6 +601,8 @@ struct drm_i915_gem_object { /** This object's place on the active/flushing/inactive lists */ struct list_head list; + /** This object's place on GPU write list */ + struct list_head gpu_write_list; /** This object's place on the fenced object LRU */ struct list_head fence_list; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b4c8c02..11daa61 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1552,6 +1552,8 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + BUG_ON(!list_empty(&obj_priv->gpu_write_list)); + obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; @@ -1622,7 +1624,8 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv, struct drm_i915_gem_object *obj_priv, *next; list_for_each_entry_safe(obj_priv, next, - &dev_priv->mm.flushing_list, list) { + &dev_priv->mm.gpu_write_list, + gpu_write_list) { struct drm_gem_object *obj = obj_priv->obj; if ((obj->write_domain & flush_domains) == @@ -1630,6 +1633,7 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv, uint32_t old_write_domain = obj->write_domain; obj->write_domain = 0; + list_del_init(&obj_priv->gpu_write_list); i915_gem_object_move_to_active(obj, seqno); trace_i915_gem_object_change_domain(obj, @@ -2084,8 +2088,8 @@ static int i915_gem_evict_everything(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; - uint32_t seqno; int ret; + uint32_t seqno; bool lists_empty; spin_lock(&dev_priv->mm.active_list_lock); @@ -2107,6 +2111,8 @@ i915_gem_evict_everything(struct drm_device *dev) if (ret) return ret; + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + ret = i915_gem_evict_from_inactive_list(dev); if (ret) return ret; @@ -2701,7 +2707,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) old_write_domain = obj->write_domain; i915_gem_flush(dev, 0, obj->write_domain); seqno = i915_add_request(dev, NULL, obj->write_domain); - obj->write_domain = 0; + BUG_ON(obj->write_domain); i915_gem_object_move_to_active(obj, seqno); trace_i915_gem_object_change_domain(obj, @@ -3850,16 +3856,23 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, i915_gem_flush(dev, dev->invalidate_domains, dev->flush_domains); - if (dev->flush_domains) + if (dev->flush_domains & I915_GEM_GPU_DOMAINS) (void)i915_add_request(dev, file_priv, dev->flush_domains); } for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; + struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t old_write_domain = obj->write_domain; obj->write_domain = obj->pending_write_domain; + if (obj->write_domain) + list_move_tail(&obj_priv->gpu_write_list, + &dev_priv->mm.gpu_write_list); + else + list_del_init(&obj_priv->gpu_write_list); + trace_i915_gem_object_change_domain(obj, obj->read_domains, old_write_domain); @@ -4370,6 +4383,7 @@ int i915_gem_init_object(struct drm_gem_object *obj) obj_priv->obj = obj; obj_priv->fence_reg = I915_FENCE_REG_NONE; INIT_LIST_HEAD(&obj_priv->list); + INIT_LIST_HEAD(&obj_priv->gpu_write_list); INIT_LIST_HEAD(&obj_priv->fence_list); obj_priv->madv = I915_MADV_WILLNEED; @@ -4821,6 +4835,7 @@ i915_gem_load(struct drm_device *dev) spin_lock_init(&dev_priv->mm.active_list_lock); INIT_LIST_HEAD(&dev_priv->mm.active_list); INIT_LIST_HEAD(&dev_priv->mm.flushing_list); + INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list); INIT_LIST_HEAD(&dev_priv->mm.inactive_list); INIT_LIST_HEAD(&dev_priv->mm.request_list); INIT_LIST_HEAD(&dev_priv->mm.fence_list); -- cgit v0.10.2 From fd2e8ea597222b8f38ae8948776a61ea7958232e Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 9 Feb 2010 14:14:36 +0000 Subject: drm/i915: Increase fb alignment to 64k An untiled framebuffer must be aligned to 64k. This is normally handled by intel_pin_and_fence_fb_obj(), but the intelfb_create() likes to be different and do the pinning itself. However, it aligns the buffer object incorrectly for pre-i965 chipsets causing a PGTBL_ERR when it is installed onto the output. Fixes: KMS error message while initializing modesetting - render error detected: EIR: 0x10 [i915] http://bugs.freedesktop.org/show_bug.cgi?id=22936 Signed-off-by: Chris Wilson Cc: stable@kernel.org Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 371d753..aaabbcb 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -148,7 +148,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_pin(fbo, PAGE_SIZE); + ret = i915_gem_object_pin(fbo, 64*1024); if (ret) { DRM_ERROR("failed to pin fb: %d\n", ret); goto out_unref; -- cgit v0.10.2 From ee25df2bc379728c45d81e04cf87984db1425edf Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Sat, 6 Feb 2010 10:41:53 -0800 Subject: drm/i915: handle FBC and self-refresh better On 945, we need to avoid entering self-refresh if the compressor is busy, or we may cause display FIFO underruns leading to ugly flicker. Fixes fdo bug #24314, kernel bug #15043. Tested-by: Alexander Lam Signed-off-by: Jesse Barnes Tested-by: Julien Cristau (fd.o #25371) Cc: stable@kernel.org Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 847006c..ab1bd2d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -338,6 +338,7 @@ #define FBC_CTL_PERIODIC (1<<30) #define FBC_CTL_INTERVAL_SHIFT (16) #define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_C3_IDLE (1<<13) #define FBC_CTL_STRIDE_SHIFT (5) #define FBC_CTL_FENCENO (1<<0) #define FBC_COMMAND 0x0320c diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7e9c835..a4d382c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1031,6 +1031,8 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) /* enable it... */ fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC; + if (IS_I945GM(dev)) + fbc_ctl |= FBC_C3_IDLE; /* 945 needs special SR handling */ fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT; if (obj_priv->tiling_mode != I915_TILING_NONE) -- cgit v0.10.2 From b1b87f6b65a770a69f3632cf7c1f9182547c1249 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 26 Jan 2010 14:40:05 -0800 Subject: drm/i915: untangle page flip completion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a new page flip is requested, we need to both queue an unpin for the current framebuffer, and also increment the flip pending count on the newly submitted buffer. At flip finish time, we need to unpin the old fb and decrement the flip pending count on the new buffer. The old code was conflating the two, and led to hangs when new direct rendered apps were started, replacing the existing frame buffer. This patch splits out the buffers and prevents the hangs. Signed-off-by: Jesse Barnes Reviewed-by: Chris Wilson Reviewed-by: Kristian Høgsberg Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a4d382c..dc6ffe8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4081,7 +4081,8 @@ static void intel_crtc_destroy(struct drm_crtc *crtc) struct intel_unpin_work { struct work_struct work; struct drm_device *dev; - struct drm_gem_object *obj; + struct drm_gem_object *old_fb_obj; + struct drm_gem_object *pending_flip_obj; struct drm_pending_vblank_event *event; int pending; }; @@ -4092,8 +4093,8 @@ static void intel_unpin_work_fn(struct work_struct *__work) container_of(__work, struct intel_unpin_work, work); mutex_lock(&work->dev->struct_mutex); - i915_gem_object_unpin(work->obj); - drm_gem_object_unreference(work->obj); + i915_gem_object_unpin(work->old_fb_obj); + drm_gem_object_unreference(work->old_fb_obj); mutex_unlock(&work->dev->struct_mutex); kfree(work); } @@ -4117,7 +4118,7 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { if (work && !work->pending) { - obj_priv = work->obj->driver_private; + obj_priv = work->pending_flip_obj->driver_private; DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n", obj_priv, atomic_read(&obj_priv->pending_flip)); @@ -4142,7 +4143,7 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev->event_lock, flags); - obj_priv = work->obj->driver_private; + obj_priv = work->pending_flip_obj->driver_private; /* Initial scanout buffer will have a 0 pending flip count */ if ((atomic_read(&obj_priv->pending_flip) == 0) || @@ -4191,7 +4192,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->event = event; work->dev = crtc->dev; intel_fb = to_intel_framebuffer(crtc->fb); - work->obj = intel_fb->obj; + work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); /* We borrow the event spin lock for protecting unpin_work */ @@ -4220,13 +4221,14 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, } /* Reference the old fb object for the scheduled work. */ - drm_gem_object_reference(work->obj); + drm_gem_object_reference(work->old_fb_obj); crtc->fb = fb; i915_gem_object_flush_write_domain(obj); drm_vblank_get(dev, intel_crtc->pipe); obj_priv = obj->driver_private; atomic_inc(&obj_priv->pending_flip); + work->pending_flip_obj = obj; BEGIN_LP_RING(4); OUT_RING(MI_DISPLAY_FLIP | -- cgit v0.10.2 From f072d2e77128c5b332ce217764cf170b660b99dc Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 9 Feb 2010 09:46:19 +0800 Subject: drm/i915: fix flip done interrupt on Ironlake On Ironlake plane flip interrupt means flip done event already, the behavior is not like old chips, and perform like other usual interrupt. So only need to handle flip done event when receiving that interrupt. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 50ddf4a..a17d6bd 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,21 +309,21 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); - if (de_iir & DE_PLANEA_FLIP_DONE) + if (de_iir & DE_PLANEA_FLIP_DONE) { intel_prepare_page_flip(dev, 0); + intel_finish_page_flip(dev, 0); + } - if (de_iir & DE_PLANEB_FLIP_DONE) + if (de_iir & DE_PLANEB_FLIP_DONE) { intel_prepare_page_flip(dev, 1); + intel_finish_page_flip(dev, 1); + } - if (de_iir & DE_PIPEA_VBLANK) { + if (de_iir & DE_PIPEA_VBLANK) drm_handle_vblank(dev, 0); - intel_finish_page_flip(dev, 0); - } - if (de_iir & DE_PIPEB_VBLANK) { + if (de_iir & DE_PIPEB_VBLANK) drm_handle_vblank(dev, 1); - intel_finish_page_flip(dev, 1); - } /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && -- cgit v0.10.2 From aacef09b59e99d9e919ede74d107d5d7f3721432 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 9 Feb 2010 09:46:20 +0800 Subject: drm/i915: fix pipe source image setting in flip command The MI_DISPLAY_FLIP command needs to be set the same pipe source image like in pipe source register, e.g source image size minus one. This fixes screen corrupt issue on Ironlake. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dc6ffe8..c161ace 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4180,7 +4180,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; unsigned long flags; - int ret; + int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC; + int ret, pipesrc; RING_LOCALS; work = kzalloc(sizeof *work, GFP_KERNEL); @@ -4236,7 +4237,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, OUT_RING(fb->pitch); if (IS_I965G(dev)) { OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode); - OUT_RING((fb->width << 16) | fb->height); + pipesrc = I915_READ(pipesrc_reg); + OUT_RING(pipesrc & 0x0fff0fff); } else { OUT_RING(obj_priv->gtt_offset); OUT_RING(MI_NOOP); -- cgit v0.10.2 From a40e8d3139e9eb54bf1d29f91639a6c5e05f652e Mon Sep 17 00:00:00 2001 From: Owain Ainsworth Date: Tue, 9 Feb 2010 14:25:55 +0000 Subject: drm/i915: Correctly return -ENOMEM on allocation failure in cmdbuf ioctls. Signed-off-by: Owain G. Ainsworth Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index e660ac0..2307f98 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -735,8 +735,10 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, if (cmdbuf->num_cliprects) { cliprects = kcalloc(cmdbuf->num_cliprects, sizeof(struct drm_clip_rect), GFP_KERNEL); - if (cliprects == NULL) + if (cliprects == NULL) { + ret = -ENOMEM; goto fail_batch_free; + } ret = copy_from_user(cliprects, cmdbuf->cliprects, cmdbuf->num_cliprects * diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 11daa61..ec8a0d7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3688,8 +3688,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (args->num_cliprects != 0) { cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects), GFP_KERNEL); - if (cliprects == NULL) + if (cliprects == NULL) { + ret = -ENOMEM; goto pre_mutex_err; + } ret = copy_from_user(cliprects, (struct drm_clip_rect __user *) -- cgit v0.10.2 From dd19e44b28b12f7ea59ebb54d8ea18054da7f9d1 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sat, 30 Jan 2010 15:41:00 +0100 Subject: drm/nouveau: move dereferences after null checks Reported-by: Dan Carpenter Signed-off-by: Marcin Slusarz Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 7e6d673..d2f6335 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -88,13 +88,14 @@ nouveau_connector_destroy(struct drm_connector *drm_connector) { struct nouveau_connector *nv_connector = nouveau_connector(drm_connector); - struct drm_device *dev = nv_connector->base.dev; - - NV_DEBUG_KMS(dev, "\n"); + struct drm_device *dev; if (!nv_connector) return; + dev = nv_connector->base.dev; + NV_DEBUG_KMS(dev, "\n"); + kfree(nv_connector->edid); drm_sysfs_connector_remove(drm_connector); drm_connector_cleanup(drm_connector); diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 6c2cf817..e7c100b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -885,11 +885,12 @@ int nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class, struct nouveau_gpuobj **gpuobj_ret) { - struct drm_nouveau_private *dev_priv = chan->dev->dev_private; + struct drm_nouveau_private *dev_priv; struct nouveau_gpuobj *gpuobj; if (!chan || !gpuobj_ret || *gpuobj_ret != NULL) return -EINVAL; + dev_priv = chan->dev->dev_private; gpuobj = kzalloc(sizeof(*gpuobj), GFP_KERNEL); if (!gpuobj) diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index 4c7f1e4..ed15905 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -54,11 +54,12 @@ static void nouveau_sgdma_clear(struct ttm_backend *be) { struct nouveau_sgdma_be *nvbe = (struct nouveau_sgdma_be *)be; - struct drm_device *dev = nvbe->dev; - - NV_DEBUG(nvbe->dev, "\n"); + struct drm_device *dev; if (nvbe && nvbe->pages) { + dev = nvbe->dev; + NV_DEBUG(dev, "\n"); + if (nvbe->bound) be->func->unbind(be); diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index 40b7360..d1a651e 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -298,14 +298,17 @@ nv50_crtc_set_clock(struct drm_device *dev, int head, int pclk) static void nv50_crtc_destroy(struct drm_crtc *crtc) { - struct drm_device *dev = crtc->dev; - struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - - NV_DEBUG_KMS(dev, "\n"); + struct drm_device *dev; + struct nouveau_crtc *nv_crtc; if (!crtc) return; + dev = crtc->dev; + nv_crtc = nouveau_crtc(crtc); + + NV_DEBUG_KMS(dev, "\n"); + drm_crtc_cleanup(&nv_crtc->base); nv50_cursor_fini(nv_crtc); -- cgit v0.10.2 From 13876c6e5fec94e9ea51b73ac025583dd7655345 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 10 Feb 2010 20:50:34 +1000 Subject: nouveau: fix state detection with switchable graphics Signed-off-by: Matthew Garrett Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 1cf4882..48227e7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -90,21 +90,21 @@ int nouveau_hybrid_setup(struct drm_device *dev) { int result; - if (nouveau_dsm(dev, NOUVEAU_DSM_ACTIVE, NOUVEAU_DSM_ACTIVE_QUERY, + if (nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STATE, &result)) return -ENODEV; NV_INFO(dev, "_DSM hardware status gave 0x%x\n", result); - if (result & 0x1) { /* Stamina mode - disable the external GPU */ + if (result) { /* Ensure that the external GPU is enabled */ + nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL); + nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED, + NULL); + } else { /* Stamina mode - disable the external GPU */ nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_STAMINA, NULL); nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STAMINA, NULL); - } else { /* Ensure that the external GPU is enabled */ - nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL); - nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED, - NULL); } return 0; -- cgit v0.10.2 From 6719fc663c6cd30da5dd02d08aaefb031a7a98fd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 9 Feb 2010 12:31:08 +1000 Subject: drm/radeon/kms: fix screen clearing before fbcon. This memset_io was added to debug something way back and got left behind, memset the fb to black so the borders don't be all white. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 66055b3..23aa393 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -248,7 +248,7 @@ int radeonfb_create(struct drm_device *dev, if (ret) goto out_unref; - memset_io(fbptr, 0xff, aligned_size); + memset_io(fbptr, 0x0, aligned_size); strcpy(info->fix.id, "radeondrmfb"); -- cgit v0.10.2 From 84b79f8d2882b0a84330c04839ed4d3cefd2ff77 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 7 Feb 2010 21:48:24 +0100 Subject: drm/i915: Fix crash while aborting hibernation Commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915) introduced the problem that if s2disk hibernation is aborted, the system will crash, because i915_pm_freeze() does nothing, while it should at least reverse some operations carried out by i915_suspend(). Fix this issue by splitting the i915 suspend into a freeze part a suspend part, where the latter is not executed before creating a hibernation image, and the i915 resume into a "low-level" resume part and a thaw part, where the former is not executed after the image has been created. Signed-off-by: Rafael J. Wysocki Tested-by: Alan Jenkins Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ecac882..79beffc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -174,78 +174,100 @@ const static struct pci_device_id pciidlist[] = { MODULE_DEVICE_TABLE(pci, pciidlist); #endif -static int i915_suspend(struct drm_device *dev, pm_message_t state) +static int i915_drm_freeze(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; - - if (!dev || !dev_priv) { - DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv); - DRM_ERROR("DRM not initialized, aborting suspend.\n"); - return -ENODEV; - } - - if (state.event == PM_EVENT_PRETHAW) - return 0; - pci_save_state(dev->pdev); /* If KMS is active, we do the leavevt stuff here */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { - if (i915_gem_idle(dev)) + int error = i915_gem_idle(dev); + if (error) { dev_err(&dev->pdev->dev, - "GEM idle failed, resume may fail\n"); + "GEM idle failed, resume might fail\n"); + return error; + } drm_irq_uninstall(dev); } i915_save_state(dev); + return 0; +} + +static void i915_drm_suspend(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + intel_opregion_free(dev, 1); + /* Modeset on resume, not lid events */ + dev_priv->modeset_on_lid = 0; +} + +static int i915_suspend(struct drm_device *dev, pm_message_t state) +{ + int error; + + if (!dev || !dev->dev_private) { + DRM_ERROR("dev: %p\n", dev); + DRM_ERROR("DRM not initialized, aborting suspend.\n"); + return -ENODEV; + } + + if (state.event == PM_EVENT_PRETHAW) + return 0; + + error = i915_drm_freeze(dev); + if (error) + return error; + + i915_drm_suspend(dev); + if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ pci_disable_device(dev->pdev); pci_set_power_state(dev->pdev, PCI_D3hot); } - /* Modeset on resume, not lid events */ - dev_priv->modeset_on_lid = 0; - return 0; } -static int i915_resume(struct drm_device *dev) +static int i915_drm_thaw(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - int ret = 0; - - if (pci_enable_device(dev->pdev)) - return -1; - pci_set_master(dev->pdev); - - i915_restore_state(dev); - - intel_opregion_init(dev, 1); + int error = 0; /* KMS EnterVT equivalent */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { mutex_lock(&dev->struct_mutex); dev_priv->mm.suspended = 0; - ret = i915_gem_init_ringbuffer(dev); - if (ret != 0) - ret = -1; + error = i915_gem_init_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); drm_irq_install(dev); - } - if (drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode(dev); } dev_priv->modeset_on_lid = 0; - return ret; + return error; +} + +static int i915_resume(struct drm_device *dev) +{ + if (pci_enable_device(dev->pdev)) + return -EIO; + + pci_set_master(dev->pdev); + + i915_restore_state(dev); + + intel_opregion_init(dev, 1); + + return i915_drm_thaw(dev); } /** @@ -386,57 +408,69 @@ i915_pci_remove(struct pci_dev *pdev) drm_put_dev(dev); } -static int -i915_pci_suspend(struct pci_dev *pdev, pm_message_t state) +static int i915_pm_suspend(struct device *dev) { - struct drm_device *dev = pci_get_drvdata(pdev); + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + int error; - return i915_suspend(dev, state); -} + if (!drm_dev || !drm_dev->dev_private) { + dev_err(dev, "DRM not initialized, aborting suspend.\n"); + return -ENODEV; + } -static int -i915_pci_resume(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); + error = i915_drm_freeze(drm_dev); + if (error) + return error; - return i915_resume(dev); -} + i915_drm_suspend(drm_dev); -static int -i915_pm_suspend(struct device *dev) -{ - return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND); -} + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); -static int -i915_pm_resume(struct device *dev) -{ - return i915_pci_resume(to_pci_dev(dev)); + return 0; } -static int -i915_pm_freeze(struct device *dev) +static int i915_pm_resume(struct device *dev) { - return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE); + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + + return i915_resume(drm_dev); } -static int -i915_pm_thaw(struct device *dev) +static int i915_pm_freeze(struct device *dev) { - /* thaw during hibernate, do nothing! */ - return 0; + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + + if (!drm_dev || !drm_dev->dev_private) { + dev_err(dev, "DRM not initialized, aborting suspend.\n"); + return -ENODEV; + } + + return i915_drm_freeze(drm_dev); } -static int -i915_pm_poweroff(struct device *dev) +static int i915_pm_thaw(struct device *dev) { - return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE); + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + + return i915_drm_thaw(drm_dev); } -static int -i915_pm_restore(struct device *dev) +static int i915_pm_poweroff(struct device *dev) { - return i915_pci_resume(to_pci_dev(dev)); + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + int error; + + error = i915_drm_freeze(drm_dev); + if (!error) + i915_drm_suspend(drm_dev); + + return error; } const struct dev_pm_ops i915_pm_ops = { @@ -445,7 +479,7 @@ const struct dev_pm_ops i915_pm_ops = { .freeze = i915_pm_freeze, .thaw = i915_pm_thaw, .poweroff = i915_pm_poweroff, - .restore = i915_pm_restore, + .restore = i915_pm_resume, }; static struct vm_operations_struct i915_gem_vm_ops = { -- cgit v0.10.2 From 75dfca80a610e4e87d3b9ccfb3f520692808697d Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 10 Feb 2010 15:09:44 -0800 Subject: drm/i915: hold ref on flip object until it completes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This will prevent things from falling over if the user frees the flip buffer before we complete the flip, since we'll hold an internal reference. Reported-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c161ace..b27202d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4094,6 +4094,7 @@ static void intel_unpin_work_fn(struct work_struct *__work) mutex_lock(&work->dev->struct_mutex); i915_gem_object_unpin(work->old_fb_obj); + drm_gem_object_unreference(work->pending_flip_obj); drm_gem_object_unreference(work->old_fb_obj); mutex_unlock(&work->dev->struct_mutex); kfree(work); @@ -4221,8 +4222,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, return ret; } - /* Reference the old fb object for the scheduled work. */ + /* Reference the objects for the scheduled work. */ drm_gem_object_reference(work->old_fb_obj); + drm_gem_object_reference(obj); crtc->fb = fb; i915_gem_object_flush_write_domain(obj); -- cgit v0.10.2 From f77cef3db357aeea22d82a2aa4f0ef8fbae41d47 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 9 Feb 2010 19:41:55 +0000 Subject: drm/vmwgfx: Update the user-space interface. When time-based throttling is implemented, we need to bump minor. When the old way of detecting scanout is removed, we need to bump major. In the meantime, this change should not break existing user-space. Signed-off-by: Thomas Hellstrom Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 135be96..0eaf6827 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -39,10 +39,10 @@ #include "ttm/ttm_execbuf_util.h" #include "ttm/ttm_module.h" -#define VMWGFX_DRIVER_DATE "20090724" +#define VMWGFX_DRIVER_DATE "20100118" #define VMWGFX_DRIVER_MAJOR 0 -#define VMWGFX_DRIVER_MINOR 1 -#define VMWGFX_DRIVER_PATCHLEVEL 2 +#define VMWGFX_DRIVER_MINOR 9 +#define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) #define VMWGFX_MAX_RELOCATIONS 2048 diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 778851f..1c7a316 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -48,6 +48,12 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, case DRM_VMW_PARAM_FIFO_OFFSET: param->value = dev_priv->mmio_start; break; + case DRM_VMW_PARAM_HW_CAPS: + param->value = dev_priv->capabilities; + break; + case DRM_VMW_PARAM_FIFO_CAPS: + param->value = dev_priv->fifo.capabilities; + break; default: DRM_ERROR("Illegal vmwgfx get param request: %d\n", param->param); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index c7efbd47..933e90d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -610,9 +610,10 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, */ srf->flags &= ~SVGA3D_SURFACE_HINT_SCANOUT; srf->scanout = true; - } else { + } else if (req->scanout) + srf->scanout = true; + else srf->scanout = false; - } if (srf->scanout && srf->num_sizes == 1 && diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h index 2be7e12..dfaf3c2 100644 --- a/include/drm/vmwgfx_drm.h +++ b/include/drm/vmwgfx_drm.h @@ -68,7 +68,8 @@ #define DRM_VMW_PARAM_NUM_FREE_STREAMS 1 #define DRM_VMW_PARAM_3D 2 #define DRM_VMW_PARAM_FIFO_OFFSET 3 - +#define DRM_VMW_PARAM_HW_CAPS 4 +#define DRM_VMW_PARAM_FIFO_CAPS 5 /** * struct drm_vmw_getparam_arg @@ -181,6 +182,8 @@ struct drm_vmw_context_arg { * The size of the array should equal the total number of mipmap levels. * @shareable: Boolean whether other clients (as identified by file descriptors) * may reference this surface. + * @scanout: Boolean whether the surface is intended to be used as a + * scanout. * * Input data to the DRM_VMW_CREATE_SURFACE Ioctl. * Output data from the DRM_VMW_REF_SURFACE Ioctl. @@ -192,7 +195,7 @@ struct drm_vmw_surface_create_req { uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES]; uint64_t size_addr; int32_t shareable; - uint32_t pad64; + int32_t scanout; }; /** @@ -295,6 +298,9 @@ union drm_vmw_surface_reference_arg { * * @commands: User-space address of a command buffer cast to an uint64_t. * @command-size: Size in bytes of the command buffer. + * @throttle-us: Sleep until software is less than @throttle_us + * microseconds ahead of hardware. The driver may round this value + * to the nearest kernel tick. * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an * uint64_t. * @@ -304,7 +310,7 @@ union drm_vmw_surface_reference_arg { struct drm_vmw_execbuf_arg { uint64_t commands; uint32_t command_size; - uint32_t pad64; + uint32_t throttle_us; uint64_t fence_rep; }; -- cgit v0.10.2 From 3bef35721018d2bac08d0d03979606b65347211e Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Tue, 9 Feb 2010 19:41:57 +0000 Subject: drm/vmwgfx: Report propper framebuffer_{max|min}_{width|height} Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index eeba6d1..31f9afe 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -769,10 +769,10 @@ int vmw_kms_init(struct vmw_private *dev_priv) drm_mode_config_init(dev); dev->mode_config.funcs = &vmw_kms_funcs; - dev->mode_config.min_width = 640; - dev->mode_config.min_height = 480; - dev->mode_config.max_width = 2048; - dev->mode_config.max_height = 2048; + dev->mode_config.min_width = 1; + dev->mode_config.min_height = 1; + dev->mode_config.max_width = dev_priv->fb_max_width; + dev->mode_config.max_height = dev_priv->fb_max_height; ret = vmw_kms_init_legacy_display_system(dev_priv); -- cgit v0.10.2 From a87897edbae2d60db7bcb6bb0a75e82013d68305 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Tue, 9 Feb 2010 21:29:47 +0000 Subject: drm/vmwgfx: Drop scanout flag compat and add execbuf ioctl parameter members. Bumps major. Even if this bumps the version to 1 it does not mean the driver is out of staging. From what we know this is the last backwards incompatible change to the driver. Signed-off-by: Jakob Bornecrantz Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 0eaf6827..3e4e670 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -39,9 +39,9 @@ #include "ttm/ttm_execbuf_util.h" #include "ttm/ttm_module.h" -#define VMWGFX_DRIVER_DATE "20100118" -#define VMWGFX_DRIVER_MAJOR 0 -#define VMWGFX_DRIVER_MINOR 9 +#define VMWGFX_DRIVER_DATE "20100209" +#define VMWGFX_DRIVER_MAJOR 1 +#define VMWGFX_DRIVER_MINOR 0 #define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 933e90d..f8fbbc6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -35,11 +35,6 @@ #define VMW_RES_SURFACE ttm_driver_type1 #define VMW_RES_STREAM ttm_driver_type2 -/* XXX: This isn't a real hardware flag, but just a hack for kernel to - * know about primary surfaces. Find a better way to accomplish this. - */ -#define SVGA3D_SURFACE_HINT_SCANOUT (1 << 9) - struct vmw_user_context { struct ttm_base_object base; struct vmw_resource res; @@ -579,6 +574,7 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, srf->flags = req->flags; srf->format = req->format; + srf->scanout = req->scanout; memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels)); srf->num_sizes = 0; for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) @@ -604,17 +600,6 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, if (unlikely(ret != 0)) goto out_err1; - if (srf->flags & SVGA3D_SURFACE_HINT_SCANOUT) { - /* we should not send this flag down to hardware since - * its not a official one - */ - srf->flags &= ~SVGA3D_SURFACE_HINT_SCANOUT; - srf->scanout = true; - } else if (req->scanout) - srf->scanout = true; - else - srf->scanout = false; - if (srf->scanout && srf->num_sizes == 1 && srf->sizes[0].width == 64 && diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h index dfaf3c2..c7645f4 100644 --- a/include/drm/vmwgfx_drm.h +++ b/include/drm/vmwgfx_drm.h @@ -303,15 +303,23 @@ union drm_vmw_surface_reference_arg { * to the nearest kernel tick. * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an * uint64_t. + * @version: Allows expanding the execbuf ioctl parameters without breaking + * backwards compatibility, since user-space will always tell the kernel + * which version it uses. + * @flags: Execbuf flags. None currently. * * Argument to the DRM_VMW_EXECBUF Ioctl. */ +#define DRM_VMW_EXECBUF_VERSION 0 + struct drm_vmw_execbuf_arg { uint64_t commands; uint32_t command_size; uint32_t throttle_us; uint64_t fence_rep; + uint32_t version; + uint32_t flags; }; /** -- cgit v0.10.2 From 598856407d4e20ebb4de01a91a93d89325924d43 Mon Sep 17 00:00:00 2001 From: Damian Lukowski Date: Wed, 10 Feb 2010 18:04:08 -0800 Subject: tcp: fix ICMP-RTO war Make sure, that TCP has a nonzero RTT estimation after three-way handshake. Currently, a listening TCP has a value of 0 for srtt, rttvar and rto right after the three-way handshake is completed with TCP timestamps disabled. This will lead to corrupt RTO recalculation and retransmission flood when RTO is recalculated on backoff reversion as introduced in "Revert RTO on ICMP destination unreachable" (f1ecd5d9e7366609d640ff4040304ea197fbc618). This behaviour can be provoked by connecting to a server which "responds first" (like SMTP) and rejecting every packet after the handshake with dest-unreachable, which will lead to softirq load on the server (up to 30% per socket in some tests). Thanks to Ilpo Jarvinen for providing debug patches and to Denys Fedoryshchenko for reporting and testing. Changes since v3: Removed bad characters in patchfile. Reported-by: Denys Fedoryshchenko Signed-off-by: Damian Lukowski Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 28e0296..3fddc69 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5783,11 +5783,9 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, /* tcp_ack considers this ACK as duplicate * and does not calculate rtt. - * Fix it at least with timestamps. + * Force it here. */ - if (tp->rx_opt.saw_tstamp && - tp->rx_opt.rcv_tsecr && !tp->srtt) - tcp_ack_saw_tstamp(sk, 0); + tcp_ack_update_rtt(sk, 0, 0); if (tp->rx_opt.tstamp_ok) tp->advmss -= TCPOLEN_TSTAMP_ALIGNED; -- cgit v0.10.2 From 85b9e4878f3b16993fba871c0c68d0948ec9c7c6 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 8 Feb 2010 09:57:25 +0000 Subject: drm/vmwgfx: Fix a circular locking dependency bug. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 3e4e670..356dc93 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -113,6 +113,7 @@ struct vmw_fifo_state { unsigned long static_buffer_size; bool using_bounce_buffer; uint32_t capabilities; + struct mutex fifo_mutex; struct rw_semaphore rwsem; }; @@ -213,7 +214,7 @@ struct vmw_private { * Fencing and IRQs. */ - uint32_t fence_seq; + atomic_t fence_seq; wait_queue_head_t fence_queue; wait_queue_head_t fifo_queue; atomic_t fence_queue_waiters; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 4157547..39d43a0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -74,6 +74,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) fifo->reserved_size = 0; fifo->using_bounce_buffer = false; + mutex_init(&fifo->fifo_mutex); init_rwsem(&fifo->rwsem); /* @@ -117,7 +118,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) (unsigned int) min, (unsigned int) fifo->capabilities); - dev_priv->fence_seq = dev_priv->last_read_sequence; + atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence); iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE); return vmw_fifo_send_fence(dev_priv, &dummy); @@ -283,7 +284,7 @@ void *vmw_fifo_reserve(struct vmw_private *dev_priv, uint32_t bytes) uint32_t reserveable = fifo_state->capabilities & SVGA_FIFO_CAP_RESERVE; int ret; - down_write(&fifo_state->rwsem); + mutex_lock(&fifo_state->fifo_mutex); max = ioread32(fifo_mem + SVGA_FIFO_MAX); min = ioread32(fifo_mem + SVGA_FIFO_MIN); next_cmd = ioread32(fifo_mem + SVGA_FIFO_NEXT_CMD); @@ -351,7 +352,7 @@ void *vmw_fifo_reserve(struct vmw_private *dev_priv, uint32_t bytes) } out_err: fifo_state->reserved_size = 0; - up_write(&fifo_state->rwsem); + mutex_unlock(&fifo_state->fifo_mutex); return NULL; } @@ -426,6 +427,7 @@ void vmw_fifo_commit(struct vmw_private *dev_priv, uint32_t bytes) } + down_write(&fifo_state->rwsem); if (fifo_state->using_bounce_buffer || reserveable) { next_cmd += bytes; if (next_cmd >= max) @@ -437,8 +439,9 @@ void vmw_fifo_commit(struct vmw_private *dev_priv, uint32_t bytes) if (reserveable) iowrite32(0, fifo_mem + SVGA_FIFO_RESERVED); mb(); - vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC); up_write(&fifo_state->rwsem); + vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC); + mutex_unlock(&fifo_state->fifo_mutex); } int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence) @@ -451,9 +454,7 @@ int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence) fm = vmw_fifo_reserve(dev_priv, bytes); if (unlikely(fm == NULL)) { - down_write(&fifo_state->rwsem); - *sequence = dev_priv->fence_seq; - up_write(&fifo_state->rwsem); + *sequence = atomic_read(&dev_priv->fence_seq); ret = -ENOMEM; (void)vmw_fallback_wait(dev_priv, false, true, *sequence, false, 3*HZ); @@ -461,7 +462,7 @@ int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence) } do { - *sequence = dev_priv->fence_seq++; + *sequence = atomic_add_return(1, &dev_priv->fence_seq); } while (*sequence == 0); if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE)) { diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c index d40086f..4d7cb53 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c @@ -85,19 +85,12 @@ bool vmw_fence_signaled(struct vmw_private *dev_priv, return true; /** - * Below is to signal stale fences that have wrapped. - * First, block fence submission. - */ - - down_read(&fifo_state->rwsem); - - /** * Then check if the sequence is higher than what we've actually * emitted. Then the fence is stale and signaled. */ - ret = ((dev_priv->fence_seq - sequence) > VMW_FENCE_WRAP); - up_read(&fifo_state->rwsem); + ret = ((atomic_read(&dev_priv->fence_seq) - sequence) + > VMW_FENCE_WRAP); return ret; } @@ -127,7 +120,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv, if (fifo_idle) down_read(&fifo_state->rwsem); - signal_seq = dev_priv->fence_seq; + signal_seq = atomic_read(&dev_priv->fence_seq); ret = 0; for (;;) { -- cgit v0.10.2 From c60a284cc41f9989391706e113d30b4f27dbe3e0 Mon Sep 17 00:00:00 2001 From: Pauli Nieminen Date: Thu, 11 Feb 2010 00:10:33 +0200 Subject: drm/radeon: Skip dma copy test in benchmark if card doesn't have dma engine. radeon_copy_dma is only available for r200 or newer cards. Call to radeon_copy_dma would result to NULL pointer dereference if benchmarking asic without dma engine. Signed-off-by: Pauli Nieminen Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 4ddfd4b..7932dc4 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -65,31 +65,42 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - start_jiffies = jiffies; - for (i = 0; i < n; i++) { - r = radeon_fence_create(rdev, &fence); - if (r) { - goto out_cleanup; + + /* r100 doesn't have dma engine so skip the test */ + if (rdev->asic->copy_dma) { + + start_jiffies = jiffies; + for (i = 0; i < n; i++) { + r = radeon_fence_create(rdev, &fence); + if (r) { + goto out_cleanup; + } + + r = radeon_copy_dma(rdev, saddr, daddr, + size / RADEON_GPU_PAGE_SIZE, fence); + + if (r) { + goto out_cleanup; + } + r = radeon_fence_wait(fence, false); + if (r) { + goto out_cleanup; + } + radeon_fence_unref(&fence); } - r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); - if (r) { - goto out_cleanup; + end_jiffies = jiffies; + time = end_jiffies - start_jiffies; + time = jiffies_to_msecs(time); + if (time > 0) { + i = ((n * size) >> 10) / time; + printk(KERN_INFO "radeon: dma %u bo moves of %ukb from" + " %d to %d in %lums (%ukb/ms %ukb/s %uM/s)\n", + n, size >> 10, + sdomain, ddomain, time, + i, i * 1000, (i * 1000) / 1024); } - r = radeon_fence_wait(fence, false); - if (r) { - goto out_cleanup; - } - radeon_fence_unref(&fence); - } - end_jiffies = jiffies; - time = end_jiffies - start_jiffies; - time = jiffies_to_msecs(time); - if (time > 0) { - i = ((n * size) >> 10) / time; - printk(KERN_INFO "radeon: dma %u bo moves of %ukb from %d to %d" - " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10, - sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024); } + start_jiffies = jiffies; for (i = 0; i < n; i++) { r = radeon_fence_create(rdev, &fence); -- cgit v0.10.2 From 648ac05c4f8a8aea908c7dff81ceffe003e28561 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 10 Feb 2010 16:52:45 +1000 Subject: drm/radeon/kms: retry auxch on 0x20 timeout value. ATOM appears to return 0x20 which seems to mean some sort of timeout. retry the transaction up to 10 times before failing, this makes DP->VGA convertor we bought work at least a bit more predictably. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 7106011..b32eeea 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -332,11 +332,13 @@ bool radeon_process_aux_ch(struct radeon_i2c_chan *chan, u8 *req_bytes, PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, ProcessAuxChannelTransaction); unsigned char *base; + int retry_count = 0; memset(&args, 0, sizeof(args)); base = (unsigned char *)rdev->mode_info.atom_context->scratch; +retry: memcpy(base, req_bytes, num_bytes); args.lpAuxRequest = 0; @@ -347,10 +349,12 @@ bool radeon_process_aux_ch(struct radeon_i2c_chan *chan, u8 *req_bytes, atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); - if (args.ucReplyStatus) { - DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x\n", + if (args.ucReplyStatus && !args.ucDataOutLen) { + if (args.ucReplyStatus == 0x20 && retry_count < 10) + goto retry; + DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n", req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3], - chan->rec.i2c_id, args.ucReplyStatus); + chan->rec.i2c_id, args.ucReplyStatus, retry_count); return false; } -- cgit v0.10.2 From 77c1ff3982c6b36961725dd19e872a1c07df7f3b Mon Sep 17 00:00:00 2001 From: Andy Getzendanner Date: Thu, 11 Feb 2010 14:04:48 +1000 Subject: vgaarb: fix incorrect dereference of userspace pointer. This patch corrects a userspace pointer dereference in the VGA arbiter in 2.6.32.1. copy_from_user() is used at line 822 to copy the contents of buf into kbuf, but a call to strncmp() on line 964 uses buf rather than kbuf. This problem led to a GPF in strncmp() when X was started on my x86_32 systems. X triggered the behavior with a write of "target PCI:0000:01:00.0" to /dev/vga_arbiter. The patch has been tested against 2.6.32.1 and observed to correct the GPF observed when starting X or manually writing the string "target PCI:0000:01:00.0" to /dev/vga_arbiter. Signed-off-by: Andy Getzendanner Cc: Jesse Barnes Cc: Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 1ac0c93..24b56dc 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -961,7 +961,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, remaining -= 7; pr_devel("client 0x%p called 'target'\n", priv); /* if target is default */ - if (!strncmp(buf, "default", 7)) + if (!strncmp(kbuf, "default", 7)) pdev = pci_dev_get(vga_default_device()); else { if (!vga_pci_str_to_vars(curr_pos, remaining, -- cgit v0.10.2 From cab4d27764d5a8654212b3e96eb0ae793aec5b94 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 11 Feb 2010 17:15:57 +0100 Subject: amd64_edac: Do not falsely trigger kerneloops An unfortunate "WARNING" in the message amd64_edac dumps when the system doesn't support DRAM ECC or ECC checking is not enabled in the BIOS used to trigger kerneloops which qualified the message as an OOPS thus misleading the users. See, e.g. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/422536 http://bugzilla.kernel.org/show_bug.cgi?id=15238 Downgrade the message level to KERN_NOTICE and fix the formulation. Cc: stable@kernel.org # .32.x Signed-off-by: Borislav Petkov Acked-by: Doug Thompson diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 000dc67..3391e67 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2658,10 +2658,11 @@ static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt) * the memory system completely. A command line option allows to force-enable * hardware ECC later in amd64_enable_ecc_error_reporting(). */ -static const char *ecc_warning = - "WARNING: ECC is disabled by BIOS. Module will NOT be loaded.\n" - " Either Enable ECC in the BIOS, or set 'ecc_enable_override'.\n" - " Also, use of the override can cause unknown side effects.\n"; +static const char *ecc_msg = + "ECC disabled in the BIOS or no ECC capability, module will not load.\n" + " Either enable ECC checking or force module loading by setting " + "'ecc_enable_override'.\n" + " (Note that use of the override may cause unknown side effects.)\n"; static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) { @@ -2673,7 +2674,7 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE); if (!ecc_enabled) - amd64_printk(KERN_WARNING, "This node reports that Memory ECC " + amd64_printk(KERN_NOTICE, "This node reports that Memory ECC " "is currently disabled, set F3x%x[22] (%s).\n", K8_NBCFG, pci_name(pvt->misc_f3_ctl)); else @@ -2681,13 +2682,13 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id); if (!nb_mce_en) - amd64_printk(KERN_WARNING, "NB MCE bank disabled, set MSR " + amd64_printk(KERN_NOTICE, "NB MCE bank disabled, set MSR " "0x%08x[4] on node %d to enable.\n", MSR_IA32_MCG_CTL, pvt->mc_node_id); if (!ecc_enabled || !nb_mce_en) { if (!ecc_enable_override) { - amd64_printk(KERN_WARNING, "%s", ecc_warning); + amd64_printk(KERN_NOTICE, "%s", ecc_msg); return -ENODEV; } ecc_enable_override = 0; -- cgit v0.10.2 From 440ab7ac2d6b735fb278a1ff1674f6716314c6bb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 11 Feb 2010 12:29:16 -0800 Subject: sparc32: Fix thinko in previous change. Should mask stack with 0xf not "0x15". Noticed by Blue Swirl Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c index f23c8fd..c49865b 100644 --- a/arch/sparc/kernel/process_32.c +++ b/arch/sparc/kernel/process_32.c @@ -526,7 +526,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, * Set some valid stack frames to give to the child. */ childstack = (struct sparc_stackf __user *) - (sp & ~0x15UL); + (sp & ~0xfUL); parentstack = (struct sparc_stackf __user *) regs->u_regs[UREG_FP]; -- cgit v0.10.2 From 93716b9470fbfd9efdc7d0f2445cb34635de3f6d Mon Sep 17 00:00:00 2001 From: Marcel Selhorst Date: Wed, 10 Feb 2010 13:56:32 -0800 Subject: tpm_infineon: fix suspend/resume handler for pnp_driver When suspending, tpm_infineon calls the generic suspend function of the TPM framework. However, the TPM framework does not return and the system hangs upon suspend. When sending the necessary command "TPM_SaveState" directly within the driver, suspending and resuming works fine. Signed-off-by: Marcel Selhorst Cc: OGAWA Hirofumi Cc: Debora Velarde Cc: Rajiv Andrade Cc: [2.6.32.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index ecba494..f584407 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -39,12 +39,12 @@ struct tpm_inf_dev { int iotype; - void __iomem *mem_base; /* MMIO ioremap'd addr */ - unsigned long map_base; /* phys MMIO base */ - unsigned long map_size; /* MMIO region size */ - unsigned int index_off; /* index register offset */ + void __iomem *mem_base; /* MMIO ioremap'd addr */ + unsigned long map_base; /* phys MMIO base */ + unsigned long map_size; /* MMIO region size */ + unsigned int index_off; /* index register offset */ - unsigned int data_regs; /* Data registers */ + unsigned int data_regs; /* Data registers */ unsigned int data_size; unsigned int config_port; /* IO Port config index reg */ @@ -406,14 +406,14 @@ static const struct tpm_vendor_specific tpm_inf = { .miscdev = {.fops = &inf_ops,}, }; -static const struct pnp_device_id tpm_pnp_tbl[] = { +static const struct pnp_device_id tpm_inf_pnp_tbl[] = { /* Infineon TPMs */ {"IFX0101", 0}, {"IFX0102", 0}, {"", 0} }; -MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl); +MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl); static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) @@ -430,7 +430,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { - tpm_dev.iotype = TPM_INF_IO_PORT; + tpm_dev.iotype = TPM_INF_IO_PORT; tpm_dev.config_port = pnp_port_start(dev, 0); tpm_dev.config_size = pnp_port_len(dev, 0); @@ -459,9 +459,9 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, goto err_last; } } else if (pnp_mem_valid(dev, 0) && - !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) { + !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) { - tpm_dev.iotype = TPM_INF_IO_MEM; + tpm_dev.iotype = TPM_INF_IO_MEM; tpm_dev.map_base = pnp_mem_start(dev, 0); tpm_dev.map_size = pnp_mem_len(dev, 0); @@ -563,11 +563,11 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, "product id 0x%02x%02x" "%s\n", tpm_dev.iotype == TPM_INF_IO_PORT ? - tpm_dev.config_port : - tpm_dev.map_base + tpm_dev.index_off, + tpm_dev.config_port : + tpm_dev.map_base + tpm_dev.index_off, tpm_dev.iotype == TPM_INF_IO_PORT ? - tpm_dev.data_regs : - tpm_dev.map_base + tpm_dev.data_regs, + tpm_dev.data_regs : + tpm_dev.map_base + tpm_dev.data_regs, version[0], version[1], vendorid[0], vendorid[1], productid[0], productid[1], chipname); @@ -607,20 +607,55 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) iounmap(tpm_dev.mem_base); release_mem_region(tpm_dev.map_base, tpm_dev.map_size); } + tpm_dev_vendor_release(chip); tpm_remove_hardware(chip->dev); } } +static int tpm_inf_pnp_suspend(struct pnp_dev *dev, pm_message_t pm_state) +{ + struct tpm_chip *chip = pnp_get_drvdata(dev); + int rc; + if (chip) { + u8 savestate[] = { + 0, 193, /* TPM_TAG_RQU_COMMAND */ + 0, 0, 0, 10, /* blob length (in bytes) */ + 0, 0, 0, 152 /* TPM_ORD_SaveState */ + }; + dev_info(&dev->dev, "saving TPM state\n"); + rc = tpm_inf_send(chip, savestate, sizeof(savestate)); + if (rc < 0) { + dev_err(&dev->dev, "error while saving TPM state\n"); + return rc; + } + } + return 0; +} + +static int tpm_inf_pnp_resume(struct pnp_dev *dev) +{ + /* Re-configure TPM after suspending */ + tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + tpm_config_out(IOLIMH, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA); + /* activate register */ + tpm_config_out(TPM_DAR, TPM_INF_ADDR); + tpm_config_out(0x01, TPM_INF_DATA); + tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); + /* disable RESET, LP and IRQC */ + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); + return tpm_pm_resume(&dev->dev); +} + static struct pnp_driver tpm_inf_pnp_driver = { .name = "tpm_inf_pnp", - .driver = { - .owner = THIS_MODULE, - .suspend = tpm_pm_suspend, - .resume = tpm_pm_resume, - }, - .id_table = tpm_pnp_tbl, + .id_table = tpm_inf_pnp_tbl, .probe = tpm_inf_pnp_probe, - .remove = __devexit_p(tpm_inf_pnp_remove), + .suspend = tpm_inf_pnp_suspend, + .resume = tpm_inf_pnp_resume, + .remove = __devexit_p(tpm_inf_pnp_remove) }; static int __init init_inf(void) @@ -638,5 +673,5 @@ module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst "); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); -MODULE_VERSION("1.9"); +MODULE_VERSION("1.9.2"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From c286d03cce118e9fb8dda8da43f9131c169c5a75 Mon Sep 17 00:00:00 2001 From: Johan Kristell Date: Wed, 10 Feb 2010 13:56:34 -0800 Subject: mmc_test: block addressed cards This patch fixes a bug in the multiblock write tests where the written data is read back for verifying one block at a time. The tests in mmc_test assumes that all cards are byte addressable. This will cause the multi block write tests to fail, leading the user of the mmc_test driver thinking there is something wrong with the sdhci driver they are testing. The start address for the block is calculated as: blocknum * 512. For block addressable cards the blocknum alone should be used. Signed-off-by: Johan Kristell Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index b9f1e84..e7f8027 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -74,6 +74,9 @@ static void mmc_test_prepare_mrq(struct mmc_test_card *test, } mrq->cmd->arg = dev_addr; + if (!mmc_card_blockaddr(test->card)) + mrq->cmd->arg <<= 9; + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; if (blocks == 1) @@ -190,7 +193,7 @@ static int __mmc_test_prepare(struct mmc_test_card *test, int write) } for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); + ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1); if (ret) return ret; } @@ -219,7 +222,7 @@ static int mmc_test_cleanup(struct mmc_test_card *test) memset(test->buffer, 0, 512); for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); + ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1); if (ret) return ret; } @@ -426,7 +429,7 @@ static int mmc_test_transfer(struct mmc_test_card *test, for (i = 0;i < sectors;i++) { ret = mmc_test_buffer_transfer(test, test->buffer + i * 512, - dev_addr + i * 512, 512, 0); + dev_addr + i, 512, 0); if (ret) return ret; } -- cgit v0.10.2 From cff9279e4e8d6ff80a640dd6977c8f76aa01e1f8 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Wed, 10 Feb 2010 13:56:36 -0800 Subject: edac: mpc85xx fix bad page calculation Commit b4846251727a38a7f248e41308c060995371dd05 ("edac: mpc85xx add mpc83xx support") accidentally broke how a chip select's first and last page addresses are calculated. The page addresses are being shifted too far right by PAGE_SHIFT. This results in errors such as: EDAC MPC85xx MC1: Err addr: 0x003075c0 EDAC MPC85xx MC1: PFN: 0x00000307 EDAC MPC85xx MC1: PFN out of range! EDAC MC1: INTERNAL ERROR: row out of range (4 >= 4) EDAC MC1: CE - no information available: INTERNAL ERROR The vaule of PAGE_SHIFT is already being taken into consideration during the calculation of the 'start' and 'end' variables, thus it is not necessary to account for it again when setting a chip select's first and last page address. Signed-off-by: Peter Tyser Signed-off-by: Doug Thompson Cc: Ira W. Snyder Cc: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index cf27402..e24a87f 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -804,8 +804,8 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) end <<= (24 - PAGE_SHIFT); end |= (1 << (24 - PAGE_SHIFT)) - 1; - csrow->first_page = start >> PAGE_SHIFT; - csrow->last_page = end >> PAGE_SHIFT; + csrow->first_page = start; + csrow->last_page = end; csrow->nr_pages = end + 1 - start; csrow->grain = 8; csrow->mtype = mtype; -- cgit v0.10.2 From f8c63345b498a8590e8e87a5990a36cdf89636df Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Wed, 10 Feb 2010 13:56:37 -0800 Subject: edac: mpc85xx fix build regression by removing unused debug code Some unused, unsupported debug code existed in the mpc85xx EDAC driver that resulted in a build failure when CONFIG_EDAC_DEBUG was defined: drivers/edac/mpc85xx_edac.c: In function 'mpc85xx_mc_err_probe': drivers/edac/mpc85xx_edac.c:1031: error: implicit declaration of function 'edac_mc_register_mcidev_debug' drivers/edac/mpc85xx_edac.c:1031: error: 'debug_attr' undeclared (first use in this function) drivers/edac/mpc85xx_edac.c:1031: error: (Each undeclared identifier is reported only once drivers/edac/mpc85xx_edac.c:1031: error: for each function it appears in.) Signed-off-by: Peter Tyser Signed-off-by: Doug Thompson Signed-off-by: Linus Torvalds diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index e24a87f..ecd5928 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -892,10 +892,6 @@ static int __devinit mpc85xx_mc_err_probe(struct of_device *op, mpc85xx_init_csrows(mci); -#ifdef CONFIG_EDAC_DEBUG - edac_mc_register_mcidev_debug((struct attribute **)debug_attr); -#endif - /* store the original error disable bits */ orig_ddr_err_disable = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE); -- cgit v0.10.2 From 763458e0dbfb4d562d62823149cf62e8b8eca82b Mon Sep 17 00:00:00 2001 From: Rishikesh Date: Wed, 10 Feb 2010 13:56:40 -0800 Subject: MAINTAINERS: changed LTP maintainership responsibilities Change the LTP maintainer responsibities from 2010. Ref: http://marc.info/?l=ltp-list&m=126502242912536&w=2 Signed-off-by : Rishikesh K Rajak Cc: Subrata Modak Cc: Mike Frysinger Cc: Garrett Cooper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 602022d..412eff6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3411,8 +3411,10 @@ S: Maintained F: drivers/scsi/sym53c8xx_2/ LTP (Linux Test Project) -M: Subrata Modak -M: Mike Frysinger +M: Rishikesh K Rajak +M: Garrett Cooper +M: Mike Frysinger +M: Subrata Modak L: ltp-list@lists.sourceforge.net (subscribers-only) W: http://ltp.sourceforge.net/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git -- cgit v0.10.2 From 4cfbafd33f5ae99688ab82525a1d449c1c1b198f Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Wed, 10 Feb 2010 13:56:40 -0800 Subject: compat_ioctl: add compat handler for TIOCGSID ioctl This is used by tcgetsid(3). Signed-off-by: Andreas Schwab Cc: Alan Cox Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index b6f23b2..30698a1 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -936,6 +936,7 @@ COMPATIBLE_IOCTL(TCSETSF) COMPATIBLE_IOCTL(TIOCLINUX) COMPATIBLE_IOCTL(TIOCSBRK) COMPATIBLE_IOCTL(TIOCCBRK) +COMPATIBLE_IOCTL(TIOCGSID) COMPATIBLE_IOCTL(TIOCGICOUNT) /* Little t */ COMPATIBLE_IOCTL(TIOCGETD) -- cgit v0.10.2 From 803bf5ec259941936262d10ecc84511b76a20921 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 10 Feb 2010 13:56:42 -0800 Subject: fs/exec.c: restrict initial stack space expansion to rlimit When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") and unmasked by fc63cf237078c86214abcb2ee9926d8ad289da9b ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: Michael Neuling Signed-off-by: KOSAKI Motohiro Cc: Americo Wang Cc: Anton Blanchard Cc: Oleg Nesterov Cc: James Morris Cc: Ingo Molnar Cc: Serge Hallyn Cc: Benjamin Herrenschmidt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 0790a107..e95c692 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -571,6 +571,9 @@ int setup_arg_pages(struct linux_binprm *bprm, struct vm_area_struct *prev = NULL; unsigned long vm_flags; unsigned long stack_base; + unsigned long stack_size; + unsigned long stack_expand; + unsigned long rlim_stack; #ifdef CONFIG_STACK_GROWSUP /* Limit stack size to 1GB */ @@ -627,10 +630,24 @@ int setup_arg_pages(struct linux_binprm *bprm, goto out_unlock; } + stack_expand = EXTRA_STACK_VM_PAGES * PAGE_SIZE; + stack_size = vma->vm_end - vma->vm_start; + /* + * Align this down to a page boundary as expand_stack + * will align it up. + */ + rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; + rlim_stack = min(rlim_stack, stack_size); #ifdef CONFIG_STACK_GROWSUP - stack_base = vma->vm_end + EXTRA_STACK_VM_PAGES * PAGE_SIZE; + if (stack_size + stack_expand > rlim_stack) + stack_base = vma->vm_start + rlim_stack; + else + stack_base = vma->vm_end + stack_expand; #else - stack_base = vma->vm_start - EXTRA_STACK_VM_PAGES * PAGE_SIZE; + if (stack_size + stack_expand > rlim_stack) + stack_base = vma->vm_end - rlim_stack; + else + stack_base = vma->vm_start - stack_expand; #endif ret = expand_stack(vma, stack_base); if (ret) -- cgit v0.10.2 From 0e5a9fb0426108d750c97c25b1ab04d3768b5aff Mon Sep 17 00:00:00 2001 From: Abhijith Das Date: Fri, 5 Feb 2010 18:25:41 -0500 Subject: GFS2: Fix error code We need this one-liner to signal the mount helper of the 'insufficient journals' condition. Signed-off-by: Abhijith Das Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 8a102f7..a86ed63 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -725,7 +725,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo) goto fail; } - error = -EINVAL; + error = -EUSERS; if (!gfs2_jindex_size(sdp)) { fs_err(sdp, "no journals!\n"); goto fail_jindex; -- cgit v0.10.2 From 07ccb7bf2c928fef4fea2cda69ba2e23479578db Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 12 Feb 2010 10:10:55 +0000 Subject: GFS2: Fix bmap allocation corner-case bug This patch solves a corner case during allocation which occurs if both metadata (indirect) and data blocks are required but there is an obstacle in the filesystem (e.g. a resource group header or another allocated block) such that when the allocation is requested only enough blocks for the metadata are returned. By changing the exit condition of this loop, we ensure that a minimum of one data block will always be returned. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 6d47379..583e823 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -541,7 +541,7 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, *ptr++ = cpu_to_be64(bn++); break; } - } while (state != ALLOC_DATA); + } while ((state != ALLOC_DATA) || !dblock); ip->i_height = height; gfs2_add_inode_blocks(&ip->i_inode, alloced); -- cgit v0.10.2 From 973e9a2795b3b41d8408a0bb6f87b783c5efc88a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 11 Feb 2010 19:20:48 +0000 Subject: regulator: Fix display of null constraints for regulators If the regulator constraints are empty and there is no voltage reported then nothing will be added to the text displayed for the constraints, leading to random stack data being printed. This is unlikely to happen for practical regulators since most will at least report a voltage but should still be fixed. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 686ef27..b60a4c9 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -661,7 +661,7 @@ static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) static void print_constraints(struct regulator_dev *rdev) { struct regulation_constraints *constraints = rdev->constraints; - char buf[80]; + char buf[80] = ""; int count = 0; int ret; -- cgit v0.10.2 From 62737d445b149eaf0beac50de8d856b5e94150be Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 12 Feb 2010 12:30:21 +0100 Subject: regulator/lp3971: vol_map out of bounds in lp3971_{ldo,dcdc}_set_voltage() After `for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)', if no break occurs, val reaches LDO_VOL_MIN_IDX + 1, which is out of bounds for ldo45_voltage_map[] and ldo123_voltage_map[]. Similarly BUCK_TARGET_VOL_MAX_IDX + 1 is out of bounds for buck_voltage_map[]. Signed-off-by: Roel Kluin Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 76d08c2..4f33a0f 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -183,7 +183,7 @@ static int lp3971_ldo_set_voltage(struct regulator_dev *dev, if (vol_map[val] >= min_vol) break; - if (vol_map[val] > max_vol) + if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol) return -EINVAL; return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo), @@ -272,7 +272,7 @@ static int lp3971_dcdc_set_voltage(struct regulator_dev *dev, if (vol_map[val] >= min_vol) break; - if (vol_map[val] > max_vol) + if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol) return -EINVAL; ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck), -- cgit v0.10.2 From 22208ac586f2e456c49e927b90ded50e923b6aee Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 12 Feb 2010 08:17:58 -0800 Subject: [IA64] preserve personality flag bits across exec In its ia64 defines SET_PERSONALITY in a way that unconditionally sets the personality of the current process to PER_LINUX, losing any flag bits from the upper 3 bytes of current->personality. This is wrong. Those bits are intended to be inherited across exec (other code takes care of ensuring that security sensitive bits like ADDR_NO_RANDOMIZE are not passed to unsuspecting setuid/setgid applications). Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h index e14108b..4c41656 100644 --- a/arch/ia64/include/asm/elf.h +++ b/arch/ia64/include/asm/elf.h @@ -201,7 +201,9 @@ extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst); relevant until we have real hardware to play with... */ #define ELF_PLATFORM NULL -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality((current->personality & ~PER_MASK) | PER_LINUX) + #define elf_read_implies_exec(ex, executable_stack) \ ((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0) -- cgit v0.10.2 From 22a8cdd60339d931d0dca54427712b2714e5ba8b Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 12 Feb 2010 10:53:08 -0500 Subject: parisc: fix tracing of signals Mike Frysinger pointed out that calling tracehook_signal_handler with stepping=0 missed testing the thread flags, resulting in not calling ptrace_notify. Fix this by testing if we're single stepping or branch stepping and setting the flag accordingly. Tested, seems to work. Reported-by: Mike Frysinger Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index fb37ac5..35c827e 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -468,7 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - tracehook_signal_handler(sig, info, ka, regs, 0); + tracehook_signal_handler(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP) || + test_thread_flag(TIF_BLOCKSTEP)); return 1; } -- cgit v0.10.2 From d6d8bf549393484e906913f02fa3c9518a2819b6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Feb 2010 18:17:06 +0100 Subject: ALSA: hda - use WARN_ON_ONCE() for zero-division detection Replace the zero-division warning message with WARN_ON_ONCE() per the advice by Linus. This shouldn't happen, but if it happens, it's possible that the bug happens often due to buggy IRQs. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e767c3f..3600e9c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1893,12 +1893,9 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) if (!bdl_pos_adj[chip->dev_index]) return 1; /* no delayed ack */ - if (azx_dev->period_bytes == 0) { - printk(KERN_WARNING - "hda-intel: Divide by zero was avoided " - "in azx_dev->period_bytes.\n"); - return 0; - } + if (WARN_ONCE(!azx_dev->period_bytes, + "hda-intel: zero azx_dev->period_bytes")) + return 0; /* this shouldn't happen! */ if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2) return 0; /* NG - it's below the period boundary */ return 1; /* OK, it's fine */ -- cgit v0.10.2 From 724e6d3fe8003c3f60bf404bf22e4e331327c596 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 12 Feb 2010 11:07:45 -0800 Subject: Linux 2.6.33-rc8 diff --git a/Makefile b/Makefile index f8e02e9..12b1aa1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v0.10.2 From fafaf31bf9f965d91462ee115e27ef6c262b74ea Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Thu, 11 Feb 2010 10:42:22 -0800 Subject: iwlwifi: fix AMSDU Rx after paged Rx patch Previous patch "use paged Rx" broke AMSDU Rx functionality. If an AP sends out A-MSDU packets the station will crash. Fix it by linearizing skbuff for AMSDU packet before handing it to mac80211 since mac80211 doesn't support paged skbuff. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2155 Reported-by: Norbert Preining Signed-off-by: Shanyu Zhao Acked-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 6f36b6e..2dbce85 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -928,7 +928,10 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, if (ieee80211_is_mgmt(fc) || ieee80211_has_protected(fc) || ieee80211_has_morefrags(fc) || - le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) + le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG || + (ieee80211_is_data_qos(fc) && + *ieee80211_get_qos_ctl(hdr) & + IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)) ret = skb_linearize(skb); else ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ? -- cgit v0.10.2 From c6b471e6454c0e1c6d756672841cbaeae7c949f8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 7 Feb 2010 17:26:30 +0000 Subject: inet: Remove bogus IGMPv3 report handling Currently we treat IGMPv3 reports as if it were an IGMPv2/v1 report. This is broken as IGMPv3 reports are formatted differently. So we end up suppressing a bogus multicast group (which should be harmless as long as the leading reserved field is zero). In fact, IGMPv3 does not allow membership report suppression so we should simply ignore IGMPv3 membership reports as a host. This patch does exactly that. I kept the case statement for it so people won't accidentally add it back thinking that we overlooked this case. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 76c0840..a42f658 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -946,7 +946,6 @@ int igmp_rcv(struct sk_buff *skb) break; case IGMP_HOST_MEMBERSHIP_REPORT: case IGMPV2_HOST_MEMBERSHIP_REPORT: - case IGMPV3_HOST_MEMBERSHIP_REPORT: /* Is it our report looped back? */ if (skb_rtable(skb)->fl.iif == 0) break; @@ -960,6 +959,7 @@ int igmp_rcv(struct sk_buff *skb) in_dev_put(in_dev); return pim_rcv_v1(skb); #endif + case IGMPV3_HOST_MEMBERSHIP_REPORT: case IGMP_DVMRP: case IGMP_TRACE: case IGMP_HOST_LEAVE_MESSAGE: -- cgit v0.10.2 From 5affcd6ba2036b59a4dee3f0576ae3584e92e4f1 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Fri, 12 Feb 2010 10:05:45 +0200 Subject: mac80211: fix handling of null-rate control in rate_control_get_rate For hardware with IEEE80211_HW_HAS_RATE_CONTROL the rate controller is not initialized. However, calling functions such as ieee80211_beacon_get result in the rate_control_get_rate function getting called, which is accessing (in this case uninitialized) rate control structures unconditionally. Fix by exiting the function before setting the rates for HW with IEEE80211_HW_HAS_RATE_CONTROL set. The initialization of the ieee80211_tx_info struct is intentionally still executed. Signed-off-by: Juuso Oikarinen Reviewed-by: Kalle Valo Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index b9007f8..12a2bff 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -245,6 +245,9 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, info->control.rates[i].count = 1; } + if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) + return; + if (sta && sdata->force_unicast_rateidx > -1) { info->control.rates[0].idx = sdata->force_unicast_rateidx; } else { -- cgit v0.10.2 From 232486e1e9f34889424b68ee6270440b554479a2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 12 Feb 2010 12:03:45 -0800 Subject: sparc64: Tighten checks in kstack_valid(). The kernel stack pointer is invalid if it is not 16-byte aligned. Based upon a report by Meelis Roos Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/kstack.h b/arch/sparc/kernel/kstack.h index 4248d96..5247283 100644 --- a/arch/sparc/kernel/kstack.h +++ b/arch/sparc/kernel/kstack.h @@ -11,6 +11,10 @@ static inline bool kstack_valid(struct thread_info *tp, unsigned long sp) { unsigned long base = (unsigned long) tp; + /* Stack pointer must be 16-byte aligned. */ + if (sp & (16UL - 1)) + return false; + if (sp >= (base + sizeof(struct thread_info)) && sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf))) return true; -- cgit v0.10.2 From 5e2a911cecc7e0fd89b1d2d001b7b89d47057ad6 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Fri, 12 Feb 2010 12:32:27 -0800 Subject: sfc: Fix SFE4002 initialisation From: Steve Hodgson Commit 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 "sfc: QT202x: Remove unreliable MMD check at initialisation" broke initialisation of the SFE4002. efx_mdio_reset_mmd() returns a positive value rather than 0 on success. The above commit causes this value to be propagated up by qt202x_reset_phy(), which is treated as a failure by its callers. Change qt202x_reset_phy() to return 0 if successful. The PCI layer treats >0 as "fail, but please call remove() anyway", which means that unloading the driver would cause a crash. Add a WARN_ON() on the failure path of efx_pci_probe() to provide early warning if there are any other cases where we do this. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 103e8b0..46997e1 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -2284,6 +2284,7 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev, fail2: efx_fini_struct(efx); fail1: + WARN_ON(rc > 0); EFX_LOG(efx, "initialisation failed. rc=%d\n", rc); free_netdev(net_dev); return rc; diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index e0d13a4..67eec7a 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -320,7 +320,7 @@ static int qt202x_reset_phy(struct efx_nic *efx) falcon_board(efx)->type->init_phy(efx); - return rc; + return 0; fail: EFX_ERR(efx, "PHY reset timed out\n"); -- cgit v0.10.2 From 3f6fae9559225741c91f1320090b285da1413290 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 11 Feb 2010 07:43:00 +0000 Subject: Btrfs: btrfs_mark_extent_written uses the wrong slot My test do: fallocate a big file and do write. The file is 512M, but after file write is done btrfs-debug-tree shows: item 6 key (257 EXTENT_DATA 0) itemoff 3516 itemsize 53 extent data disk byte 1103101952 nr 536870912 extent data offset 0 nr 399634432 ram 536870912 extent compression 0 Looks like a regression introducted by 6c7d54ac87f338c479d9729e8392eca3f76e11e1, where we set wrong slot. Signed-off-by: Shaohua Li Acked-by: Yan Zheng Signed-off-by: Chris Mason diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 413a30d..a7fd9f3 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -720,13 +720,15 @@ again: inode->i_ino, orig_offset); BUG_ON(ret); } - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); if (del_nr == 0) { + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); btrfs_mark_buffer_dirty(leaf); } else { + fi = btrfs_item_ptr(leaf, del_slot - 1, + struct btrfs_file_extent_item); btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); btrfs_set_file_extent_num_bytes(leaf, fi, -- cgit v0.10.2 From fa644298eb24ab05b32acf6cc0f2265b833280e1 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 15 Dec 2009 12:58:09 +0000 Subject: powerpc/85xx: Fix oops during MSI driver probe on MPC85xxMDS boards MPC85xx chips report the wrong value in feature reporting register, and that causes the following oops: Unable to handle kernel paging request for data at address 0x00000c00 Faulting instruction address: 0xc0019294 Oops: Kernel access of bad area, sig: 11 [#1] MPC8569 MDS Modules linked in: [...] NIP [c0019294] mpic_set_irq_type+0x2f0/0x368 LR [c0019124] mpic_set_irq_type+0x180/0x368 Call Trace: [ef851d60] [c0019124] mpic_set_irq_type+0x180/0x368 (unreliable) [ef851d90] [c007958c] __irq_set_trigger+0x44/0xd4 [ef851db0] [c007b550] set_irq_type+0x40/0x7c [ef851dc0] [c0004a60] irq_create_of_mapping+0xb4/0x114 [ef851df0] [c0004af0] irq_of_parse_and_map+0x30/0x40 [ef851e20] [c0405678] fsl_of_msi_probe+0x1a0/0x328 [ef851e60] [c02e6438] of_platform_device_probe+0x5c/0x84 [...] This is because mpic_alloc() assigns wrong values to mpic->isu_{size,shift,mask}, and things eventually break when _mpic_irq_read() is trying to use them. This patch fixes the issue by enabling MPIC_BROKEN_FRR_NIRQS quirk. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 21f61b8..cc29c0f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -338,7 +338,8 @@ static void __init mpc85xx_mds_pic_init(void) } mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); -- cgit v0.10.2 From d1d47ec6e62ab08d2ebb925fd9203abfad3adfbf Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 18 Dec 2009 16:50:37 -0600 Subject: powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmem Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused the "cpu-release-addr" device tree property to contain the physical RAM location that secondary cores were spinning at. Previously, the "cpu-release-addr" property contained a value referencing the boot page translation address range of 0xfffffxxx, which then indirectly accessed RAM. The "cpu-release-addr" is currently ioremapped and the secondary cores kicked. However, due to the recent change in "cpu-release-addr", it sometimes points to a memory location in low memory that cannot be ioremapped. For example on a P2020-based board with 512MB of RAM the following error occurs on bootup: <...> mpic: requesting IPIs ... __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0 Unable to handle kernel paging request for data at address 0x00000014 Faulting instruction address: 0xc05df9b0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P2020 RDB Modules linked in: <... eventual kernel panic> Adding logic to conditionally ioremap or access memory directly resolves the issue. Signed-off-by: Peter Tyser Signed-off-by: Nate Case Reported-by: Dipen Dudhat Tested-by: Dipen Dudhat Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 04160a4..a15f582 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -46,6 +46,7 @@ smp_85xx_kick_cpu(int nr) __iomem u32 *bptr_vaddr; struct device_node *np; int n = 0; + int ioremappable; WARN_ON (nr < 0 || nr >= NR_CPUS); @@ -59,21 +60,37 @@ smp_85xx_kick_cpu(int nr) return; } + /* + * A secondary core could be in a spinloop in the bootpage + * (0xfffff000), somewhere in highmem, or somewhere in lowmem. + * The bootpage and highmem can be accessed via ioremap(), but + * we need to directly access the spinloop if its in lowmem. + */ + ioremappable = *cpu_rel_addr > virt_to_phys(high_memory); + /* Map the spin table */ - bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + if (ioremappable) + bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + else + bptr_vaddr = phys_to_virt(*cpu_rel_addr); local_irq_save(flags); out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); + if (!ioremappable) + flush_dcache_range((ulong)bptr_vaddr, + (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); + /* Wait a bit for the CPU to ack. */ while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) mdelay(1); local_irq_restore(flags); - iounmap(bptr_vaddr); + if (ioremappable) + iounmap(bptr_vaddr); pr_debug("waited %d msecs for CPU #%d.\n", n, nr); } -- cgit v0.10.2 From a9bb18f36c8056f0712fb28c52c0f85d98438dfb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 10 Feb 2010 17:23:47 +0100 Subject: tracing/kprobes: Fix probe parsing Trying to add a probe like: echo p:myprobe 0x10000 > /sys/kernel/debug/tracing/kprobe_events will fail since the wrong pointer is passed to strict_strtoul when trying to convert the address to an unsigned long. Signed-off-by: Heiko Carstens Acked-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <20100210162346.GA6933@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 6ea90c0..50b1b82 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -689,7 +689,7 @@ static int create_trace_probe(int argc, char **argv) return -EINVAL; } /* an address specified */ - ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr); + ret = strict_strtoul(&argv[1][0], 0, (unsigned long *)&addr); if (ret) { pr_info("Failed to parse address.\n"); return ret; -- cgit v0.10.2 From 1a72cfa6856e7d58e049c42c6e6a789669478479 Mon Sep 17 00:00:00 2001 From: Kirill Smelkov Date: Fri, 12 Feb 2010 19:20:59 +0300 Subject: perf top: Fix help text alignment Print this: Mapped keys: [d] display refresh delay. (2) [e] display entries (lines). (46) [f] profile display filter (count). (5) [F] annotate display filter (percent). (5%) [s] annotate symbol. (NULL) [S] stop annotation. [K] hide kernel_symbols symbols. (no) [U] hide user symbols. (no) [z] toggle sample zeroing. (0) [qQ] quit. instead of: Mapped keys: [d] display refresh delay. (2) [e] display entries (lines). (46) [f] profile display filter (count). (5) [F] annotate display filter (percent). (5%) [s] annotate symbol. (NULL) [S] stop annotation. [K] hide kernel_symbols symbols. (no) [U] hide user symbols. (no) [z] toggle sample zeroing. (0) [qQ] quit. Signed-off-by: Kirill Smelkov Acked-by: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <20100212162059.GA30041@landau.phys.spbu.ru> Signed-off-by: Ingo Molnar diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index ddc584b..4b91d8c 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -705,7 +705,7 @@ static void print_mapped_keys(void) fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0); fprintf(stdout, - "\t[K] hide kernel_symbols symbols. \t(%s)\n", + "\t[K] hide kernel_symbols symbols. \t(%s)\n", hide_kernel_symbols ? "yes" : "no"); fprintf(stdout, "\t[U] hide user symbols. \t(%s)\n", -- cgit v0.10.2 From 7f51a100bba517196ac4bdf29408d20ee1c771e8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 8 Feb 2010 08:30:03 +0100 Subject: firewire: ohci: retransmit isochronous transmit packets on cycle loss In isochronous transmit DMA descriptors, link the skip address pointer back to the descriptor itself. When a cycle is lost, the controller will send the packet in the next cycle, instead of terminating the entire DMA program. There are two reasons for this: * This behaviour is compatible with the old IEEE1394 stack. Old applications would not expect the DMA program to stop in this case. * Since the OHCI driver does not report any uncompleted packets, the context would stop silently; clients would not have any chance to detect and handle this error without a watchdog timer. Signed-off-by: Clemens Ladisch Pieter Palmers notes: "The reason I added this retry behavior to the old stack is because some cards now and then fail to send a packet (e.g. the o2micro card in my dell laptop). I couldn't figure out why exactly this happens, my best guess is that the card cannot fetch the payload data on time. This happens much more frequently when sending large packets, which leads me to suspect that there are some contention issues with the DMA that fills the transmit FIFO. In the old stack it was a pretty critical issue as it resulted in a freeze of the userspace application. The omission of a packet doesn't necessarily have to be an issue. E.g. in IEC61883 streams the DBC field can be used to detect discontinuities in the stream. So as long as the other side doesn't bail when no [packet] is present in a cycle, there is not really a problem. I'm not convinced though that retrying is the proper solution, but it is simple and effective for what it had to do. And I think there are no reasons not to do it this way. Userspace can still detect this by checking the cycle the descriptor was sent in." Signed-off-by: Stefan Richter (changelog, comment) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 2345d41..43ebf33 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2101,11 +2101,6 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base, u32 payload_index, payload_end_index, next_page_index; int page, end_page, i, length, offset; - /* - * FIXME: Cycle lost behavior should be configurable: lose - * packet, retransmit or terminate.. - */ - p = packet; payload_index = payload; @@ -2135,6 +2130,14 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base, if (!p->skip) { d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE); d[0].req_count = cpu_to_le16(8); + /* + * Link the skip address to this descriptor itself. This causes + * a context to skip a cycle whenever lost cycles or FIFO + * overruns occur, without dropping the data. The application + * should then decide whether this is an error condition or not. + * FIXME: Make the context's cycle-lost behaviour configurable? + */ + d[0].branch_address = cpu_to_le32(d_bus | z); header = (__le32 *) &d[1]; header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) | -- cgit v0.10.2 From 6f93d0a7c83772997b81c30d6f519a9a5dbab6a9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 14 Feb 2010 11:12:04 +0100 Subject: perf_events: Fix FORK events Commit 22e19085 ("Honour event state for aux stream data") introduced a bug where we would drop FORK events. The thing is that we deliver FORK events to the child process' event, which at that time will be PERF_EVENT_STATE_INACTIVE because the child won't be scheduled in (we're in the middle of fork). Solve this twice, change the event state filter to exclude only disabled (STATE_OFF) or worse, and deliver FORK events to the current (parent). Signed-off-by: Peter Zijlstra Cc: Anton Blanchard Cc: Arnaldo Carvalho de Melo LKML-Reference: <1266142324.5273.411.camel@laptop> Signed-off-by: Ingo Molnar diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 2b19297..2ae7409 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3259,8 +3259,6 @@ static void perf_event_task_output(struct perf_event *event, task_event->event_id.tid = perf_event_tid(event, task); task_event->event_id.ptid = perf_event_tid(event, current); - task_event->event_id.time = perf_clock(); - perf_output_put(&handle, task_event->event_id); perf_output_end(&handle); @@ -3268,7 +3266,7 @@ static void perf_event_task_output(struct perf_event *event, static int perf_event_task_match(struct perf_event *event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) @@ -3300,7 +3298,7 @@ static void perf_event_task_event(struct perf_task_event *task_event) cpuctx = &get_cpu_var(perf_cpu_context); perf_event_task_ctx(&cpuctx->ctx, task_event); if (!ctx) - ctx = rcu_dereference(task_event->task->perf_event_ctxp); + ctx = rcu_dereference(current->perf_event_ctxp); if (ctx) perf_event_task_ctx(ctx, task_event); put_cpu_var(perf_cpu_context); @@ -3331,6 +3329,7 @@ static void perf_event_task(struct task_struct *task, /* .ppid */ /* .tid */ /* .ptid */ + .time = perf_clock(), }, }; @@ -3380,7 +3379,7 @@ static void perf_event_comm_output(struct perf_event *event, static int perf_event_comm_match(struct perf_event *event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) @@ -3500,7 +3499,7 @@ static void perf_event_mmap_output(struct perf_event *event, static int perf_event_mmap_match(struct perf_event *event, struct perf_mmap_event *mmap_event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) -- cgit v0.10.2 From 175359f89df39f4faed663c8cfd6ee0222d2fa1e Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 11 Feb 2010 13:13:10 +0100 Subject: reiserfs: Fix softlockup while waiting on an inode When we wait for an inode through reiserfs_iget(), we hold the reiserfs lock. And waiting for an inode may imply waiting for its writeback. But the inode writeback path may also require the reiserfs lock, which leads to a deadlock. We just need to release the reiserfs lock from reiserfs_iget() to fix this. Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Chris Mason diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 9087b10..2df0f5c 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1497,9 +1497,11 @@ struct inode *reiserfs_iget(struct super_block *s, const struct cpu_key *key) args.objectid = key->on_disk_key.k_objectid; args.dirid = key->on_disk_key.k_dir_id; + reiserfs_write_unlock(s); inode = iget5_locked(s, key->on_disk_key.k_objectid, reiserfs_find_actor, reiserfs_init_locked_inode, (void *)(&args)); + reiserfs_write_lock(s); if (!inode) return ERR_PTR(-ENOMEM); -- cgit v0.10.2 From 775c67090c98780b44c4f95d5c05565df715b8bd Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 12 Feb 2010 00:17:59 +0100 Subject: drm: Fix a bug in the range manager. When searching for free space in a range, the function could return a node extending outside of the given range. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index cdec329..2ac074c8 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -405,7 +405,8 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm, wasted += alignment - tmp; } - if (entry->size >= size + wasted) { + if (entry->size >= size + wasted && + (entry->start + wasted + size) <= end) { if (!best_match) return entry; if (entry->size < best_size) { -- cgit v0.10.2 From e22238ea37a870f70e34668a4992bde0c92bba8d Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 12 Feb 2010 00:18:00 +0100 Subject: drm/ttm: Fix a bug occuring when validating a buffer object in a range. If the buffer object was already in the requested memory type, but outside of the requested range it was never moved into the requested range. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 1a3e909..c7320ce 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1020,6 +1020,12 @@ static int ttm_bo_mem_compat(struct ttm_placement *placement, struct ttm_mem_reg *mem) { int i; + struct drm_mm_node *node = mem->mm_node; + + if (node && placement->lpfn != 0 && + (node->start < placement->fpfn || + node->start + node->size > placement->lpfn)) + return -1; for (i = 0; i < placement->num_placement; i++) { if ((placement->placement[i] & mem->placement & -- cgit v0.10.2 From ce36f00d599e0f988c2a1b7b276d9184ee9c5d82 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Sat, 13 Feb 2010 20:20:19 -0500 Subject: drm/radeon/kms/atom: use get_unaligned_le32() for ctx->ps Noticed on a DEC Alpha. Start up into console mode caused 15 unaligned accesses, and starting X caused another 48. Signed-off-by: Matt Turner CC: Jerome Glisse CC: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index e3b4456..2a3df55 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -24,6 +24,7 @@ #include #include +#include #define ATOM_DEBUG @@ -212,7 +213,9 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr, case ATOM_ARG_PS: idx = U8(*ptr); (*ptr)++; - val = le32_to_cpu(ctx->ps[idx]); + /* get_unaligned_le32 avoids unaligned accesses from atombios + * tables, noticed on a DEC Alpha. */ + val = get_unaligned_le32((u32 *)&ctx->ps[idx]); if (print) DEBUG("PS[0x%02X,0x%04X]", idx, val); break; -- cgit v0.10.2 From 4b505db9c4c72dbd2a8e66b8d681640101325af6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 15 Feb 2010 14:17:45 +0900 Subject: sh64: fix tracing of signals. This follows the parisc change to ensure that tracehook_signal_handler() is aware of when we are single-stepping in order to ptrace_notify() appropriately. While this was implemented for 32-bit SH, sh64 neglected to make use of TIF_SINGLESTEP when it was folded in with the 32-bit code, resulting in ptrace_notify() never being called. As sh64 uses all of the other abstractions already, this simply plugs in the thread flag in the appropriate enable/disable paths and fixes up the tracehook notification accordingly. With this in place, sh64 is brought in line with what 32-bit is already doing. Reported-by: Mike Frysinger Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 873ebdc..b063eb8 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -133,6 +133,8 @@ void user_enable_single_step(struct task_struct *child) struct pt_regs *regs = child->thread.uregs; regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ + + set_tsk_thread_flag(child, TIF_SINGLESTEP); } void user_disable_single_step(struct task_struct *child) @@ -140,6 +142,8 @@ void user_disable_single_step(struct task_struct *child) struct pt_regs *regs = child->thread.uregs; regs->sr &= ~SR_SSTEP; + + clear_tsk_thread_flag(child, TIF_SINGLESTEP); } static int genregs_get(struct task_struct *target, @@ -454,6 +458,8 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { + int step; + if (unlikely(current->audit_context)) audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), regs->regs[9]); @@ -461,8 +467,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->regs[9]); - if (test_thread_flag(TIF_SYSCALL_TRACE)) - tracehook_report_syscall_exit(regs, 0); + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } /* Called with interrupts disabled */ diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index ce76dbd..580e97d 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -118,7 +118,9 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset) * clear the TS_RESTORE_SIGMASK flag. */ current_thread_info()->status &= ~TS_RESTORE_SIGMASK; - tracehook_signal_handler(signr, &info, &ka, regs, 0); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); return 1; } } -- cgit v0.10.2 From e803e8b2628f3e9a42f45c5b7bb1f9821b08352c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 15 Feb 2010 15:24:48 +1000 Subject: drm/radeon/kms: make sure retry count increases. In testing I've never seen it go past 1 retry anyways but better safe than sorry. Reported by Droste on irc. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index b32eeea..99915a6 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -350,7 +350,7 @@ retry: atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); if (args.ucReplyStatus && !args.ucDataOutLen) { - if (args.ucReplyStatus == 0x20 && retry_count < 10) + if (args.ucReplyStatus == 0x20 && retry_count++ < 10) goto retry; DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n", req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3], -- cgit v0.10.2 From 0a27fcfaaf61108d94f0377f91bed81b2dd35f52 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Feb 2010 17:05:28 +0100 Subject: ALSA: hda - Correct ASUA blacklist for MSI brokenness The MSI blacklist entry for ASUS mobo added in the commit 8ce28d6abff34886d3797b25324c940471b99164 was based on the alsa-info output wrongly posted. Fix the id to the right one now. Reported-by: Sid Boyce Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3600e9c..ff6da6f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2350,7 +2350,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ - SND_PCI_QUIRK(0x1043, 0x829c, "ASUS", 0), /* nvidia */ + SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */ {} }; -- cgit v0.10.2 From d9184fa97b6f48d399636e5e2669bc8419f9369e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 16 Feb 2010 11:14:14 +1000 Subject: drm/nouveau: use mutex for vbios lock Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 2cd0fad..0e9cd1d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -5861,13 +5861,12 @@ nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table, struct drm_nouveau_private *dev_priv = dev->dev_private; struct nvbios *bios = &dev_priv->VBIOS; struct init_exec iexec = { true, false }; - unsigned long flags; - spin_lock_irqsave(&bios->lock, flags); + mutex_lock(&bios->lock); bios->display.output = dcbent; parse_init_table(bios, table, &iexec); bios->display.output = NULL; - spin_unlock_irqrestore(&bios->lock, flags); + mutex_unlock(&bios->lock); } static bool NVInitVBIOS(struct drm_device *dev) @@ -5876,7 +5875,7 @@ static bool NVInitVBIOS(struct drm_device *dev) struct nvbios *bios = &dev_priv->VBIOS; memset(bios, 0, sizeof(struct nvbios)); - spin_lock_init(&bios->lock); + mutex_init(&bios->lock); bios->dev = dev; if (!NVShadowVBIOS(dev, bios->data)) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 68446fd..fd94bd6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -205,7 +205,7 @@ struct nvbios { struct drm_device *dev; struct nouveau_bios_info pub; - spinlock_t lock; + struct mutex lock; uint8_t data[NV_PROM_SIZE]; unsigned int length; -- cgit v0.10.2 From bf929efa56ac174bf6d4f54cd6fe811181a51ae5 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 11 Feb 2010 12:47:40 +0100 Subject: drm/nouveau: Force TV encoder DPMS reinit after resume. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 58b917c..21ac6e4 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -579,6 +579,8 @@ static void nv17_tv_restore(struct drm_encoder *encoder) nouveau_encoder(encoder)->restore.output); nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state); + + nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED; } static int nv17_tv_create_resources(struct drm_encoder *encoder, -- cgit v0.10.2 From 65d269538a1129495ac45a14a777cd11cfe881d8 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 15 Feb 2010 12:19:53 -0500 Subject: NFS: Too many GETATTR and ACCESS calls after direct I/O The cached read and write paths initialize fattr->time_start in their setup procedures. The value of fattr->time_start is propagated to read_cache_jiffies by nfs_update_inode(). Subsequent calls to nfs_attribute_timeout() will then use a good time stamp when computing the attribute cache timeout, and squelch unneeded GETATTR calls. Since the direct I/O paths erroneously leave the inode's fattr->time_start field set to zero, read_cache_jiffies for that inode is set to zero after any direct read or write operation. This triggers an otw GETATTR or ACCESS call to update the file's attribute and access caches properly, even when the NFS READ or WRITE replies have usable post-op attributes. Make sure the direct read and write setup code performs the same fattr initialization as the cached I/O paths to prevent unnecessary GETATTR calls. This was likely introduced by commit 0e574af1 in 2.6.15, which appears to add new nfs_fattr_init() call sites in the cached read and write paths, but not in the equivalent places in fs/nfs/direct.c. A subsequent commit in the same series, 33801147, introduces the fattr->time_start field. Interestingly, the direct write reschedule path already has a call to nfs_fattr_init() in the right place. Reported-by: Quentin Barnes Signed-off-by: Chuck Lever Cc: stable@kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index e1d415e..0d28982 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -342,6 +342,7 @@ static ssize_t nfs_direct_read_schedule_segment(struct nfs_direct_req *dreq, data->res.fattr = &data->fattr; data->res.eof = 0; data->res.count = bytes; + nfs_fattr_init(&data->fattr); msg.rpc_argp = &data->args; msg.rpc_resp = &data->res; @@ -575,6 +576,7 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq) data->res.count = 0; data->res.fattr = &data->fattr; data->res.verf = &data->verf; + nfs_fattr_init(&data->fattr); NFS_PROTO(data->inode)->commit_setup(data, &msg); @@ -766,6 +768,7 @@ static ssize_t nfs_direct_write_schedule_segment(struct nfs_direct_req *dreq, data->res.fattr = &data->fattr; data->res.count = bytes; data->res.verf = &data->verf; + nfs_fattr_init(&data->fattr); task_setup_data.task = &data->task; task_setup_data.callback_data = data; -- cgit v0.10.2 From a626e8478b18de4fdee0e6d13975cea2b23efea5 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 11 Feb 2010 04:13:49 +0000 Subject: ixgbe: Fix - Do not allow Rx FC on 82598 at 1G due to errata The 82598 has an erratum that receipt of pause frames at 1G could lead to a Tx Hang. To avoid this this patch disables Rx FC while at 1G speed for all 82598 parts. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 3103f41..35a06b4758 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -357,12 +357,34 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) u32 fctrl_reg; u32 rmcs_reg; u32 reg; + u32 link_speed = 0; + bool link_up; #ifdef CONFIG_DCB if (hw->fc.requested_mode == ixgbe_fc_pfc) goto out; #endif /* CONFIG_DCB */ + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + /* Negotiate the fc mode to use */ ret_val = ixgbe_fc_autoneg(hw); if (ret_val) -- cgit v0.10.2 From e86bff0edaa514a63ecd80e1ed2b3472b2507880 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 11 Feb 2010 04:14:08 +0000 Subject: ixgbe: fix WOL register setup for 82599 We need to have the WUS register set to all 1's in order for the hardware to be capable of ever waking up. Set it here in the ixgbe_probe(). Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7b7c848..951b73c 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5763,6 +5763,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_sw_init; + /* Make it possible the adapter to be woken up via WOL */ + if (adapter->hw.mac.type == ixgbe_mac_82599EB) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + /* * If there is a fan on this device and it has failed log the * failure. -- cgit v0.10.2 From f04d5e012d73ea441bd39804ace39fd6d1ce5611 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 2 Feb 2010 14:37:58 -0800 Subject: thinkpad-acpi: wrong thermal attribute_group removed in thermal_exit() sysfs_remove_group() removed the wrong attribute_group for thermal_read_mode TPEC_8, ACPI_TMP07 and ACPI_UPDT Signed-off-by: Roel Kluin Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e67e4fe..eb603f1d5 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -5771,7 +5771,7 @@ static void thermal_exit(void) case TPACPI_THERMAL_ACPI_TMP07: case TPACPI_THERMAL_ACPI_UPDT: sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, - &thermal_temp_input16_group); + &thermal_temp_input8_group); break; case TPACPI_THERMAL_NONE: default: -- cgit v0.10.2 From 97c169d39b6846a564dc8d883832e7fef9bdb77d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 16 Feb 2010 03:30:06 -0500 Subject: ACPI: remove Asus P2B-DS from acpi=ht blacklist We realized when we broke acpi=ht http://bugzilla.kernel.org/show_bug.cgi?id=14886 that acpi=ht is not needed on this box and folks have been using acpi=force on it anyway. Signed-off-by: Len Brown diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0acbcdf..af1c583 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1344,14 +1344,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS CUR-DLS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), -- cgit v0.10.2 From 49c6fb2e41d41c4c0c5c753b6960bc81fe658d20 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Mon, 1 Feb 2010 10:35:18 -0700 Subject: ACPI: dock: properly initialize local struct dock_station in dock_add() Commit fe06fba2 (ACPI: dock: add struct dock_station * directly to platform device data) changed dock_add() to use the platform_device_register_data() API. We passed that interface a stack variable, which is kmemdup'ed and assigned to the device's platform_data pointer. Unfortunately, whatever random garbage is in the stack variable gets coped during the kmemdup, and that leads to broken behavior. Explicitly zero out the structure before passing it to the API. This fixes the T41 docking button issue: http://bugzilla.kernel.org/show_bug.cgi?id=15000 Cc: stable@kernel.org Reported-by: Chris Mason Signed-off-by: Alex Chiang Signed-off-by: Len Brown diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bbc2c13..b2586f5 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -935,6 +935,7 @@ static int dock_add(acpi_handle handle) struct platform_device *dd; id = dock_station_count; + memset(&ds, 0, sizeof(ds)); dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds)); if (IS_ERR(dd)) return PTR_ERR(dd); -- cgit v0.10.2 From 370d5cd88509b93b76eb2f5f97efbd71c25061cb Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 27 Jan 2010 15:25:39 -0800 Subject: ACPI: fix High cpu temperature with 2.6.32 Since the rewrite of the CPU idle governor in 2.6.32, two laptops have surfaced where the BIOS advertises a C2 power state, but for some reason this state is not functioning (as verified in both cases by powertop before the patch in .32). The old governor had the accidental behavior that if a non-working state was chosen too many times, it would end up falling back to C1. The new governor works differently and this accidental behavior is no longer there; the result is a high temperature on these two machines. This patch adds these 2 machines to the DMI table for C state anomalies; by just not using C2 both these machines are better off (the TSC can be used instead of the pm timer, giving a performance boost for example). Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14742 Signed-off-by: Arjan van de Ven Reported-by: Cc: Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 7c0441f..e88e8ae0 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -110,6 +110,14 @@ static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, (void *)2}, + { set_max_cstate, "Pavilion zv5000", { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")}, + (void *)1}, + { set_max_cstate, "Asus L8400B", { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")}, + (void *)1}, {}, }; -- cgit v0.10.2 From 1379d2fef0ec07c7027a5e89036025ce761470c8 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 16 Feb 2010 04:16:55 -0500 Subject: ACPI, i915: blacklist Clevo M5x0N bad_lid state Wrong Lid state reported. Need to blacklist this machine for LVDS detection. Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b1d0acb..c2e8a45 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -636,6 +636,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"), }, }, + { + .ident = "Clevo M5x0N", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), + DMI_MATCH(DMI_BOARD_NAME, "M5x0N"), + }, + }, { } }; -- cgit v0.10.2 From 1252f238db48ec419f40c1bdf30fda649860eed9 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 16 Feb 2010 15:02:13 +0100 Subject: x86: set_personality_ia32() misses force_personality32 05d43ed8a "x86: get rid of the insane TIF_ABI_PENDING bit" forgot about force_personality32. Fix. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 41a26a8..126f0b4 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -527,6 +527,7 @@ void set_personality_ia32(void) /* Make sure to be in 32bit mode */ set_thread_flag(TIF_IA32); + current->personality |= force_personality32; /* Prepare the first "return" to user space */ current_thread_info()->status |= TS_COMPAT; -- cgit v0.10.2 From 11557b24fdec13cb1c3d5f681688401a651ed54e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 16 Feb 2010 15:24:01 +0100 Subject: x86: ELF_PLAT_INIT() shouldn't worry about TIF_IA32 The 64-bit version of ELF_PLAT_INIT() clears TIF_IA32, but at this point it has already been cleared by SET_PERSONALITY == set_personality_64bit. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index 1994d3f..f2ad216 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -170,10 +170,7 @@ static inline void elf_common_init(struct thread_struct *t, } #define ELF_PLAT_INIT(_r, load_addr) \ -do { \ - elf_common_init(¤t->thread, _r, 0); \ - clear_thread_flag(TIF_IA32); \ -} while (0) + elf_common_init(¤t->thread, _r, 0) #define COMPAT_ELF_PLAT_INIT(regs, load_addr) \ elf_common_init(¤t->thread, regs, __USER_DS) -- cgit v0.10.2 From 781248c1b50c776a9ef4be1130f84ced1cba42fe Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Tue, 16 Feb 2010 18:42:47 +0000 Subject: dm stripe: avoid divide by zero with invalid stripe count If a table containing zero as stripe count is passed into stripe_ctr the code attempts to divide by zero. This patch changes DM_TABLE_LOAD to return -EINVAL if the stripe count is zero. We now get the following error messages: device-mapper: table: 253:0: striped: Invalid stripe count device-mapper: ioctl: error adding target to table Signed-off-by: Nikanth Karthikesan Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index e0efc1a..bd58703 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -110,7 +110,7 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv) } stripes = simple_strtoul(argv[0], &end, 10); - if (*end) { + if (!stripes || *end) { ti->error = "Invalid stripe count"; return -EINVAL; } -- cgit v0.10.2 From 55f67f2dedec1e3049abc30b6d82b999a14cafb7 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 16 Feb 2010 18:42:51 +0000 Subject: dm snapshot: persistent annotate work_queue as on stack chunk_io() declares its 'struct mdata_req' on the stack and then initializes its 'struct work_struct' member. Annotate the initialization of this workqueue with INIT_WORK_ON_STACK to suppress a debugobjects warning seen when CONFIG_DEBUG_OBJECTS_WORK is enabled. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index 7d08879..c097d8a 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -254,7 +254,7 @@ static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw, * Issue the synchronous I/O from a different thread * to avoid generic_make_request recursion. */ - INIT_WORK(&req.work, do_metadata); + INIT_WORK_ON_STACK(&req.work, do_metadata); queue_work(ps->metadata_wq, &req.work); flush_workqueue(ps->metadata_wq); -- cgit v0.10.2 From ebfd32bba9b518d684009d9d21a56742337ca1b3 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Tue, 16 Feb 2010 18:42:53 +0000 Subject: dm log: userspace fix overhead_size calcuations This patch fixes two bugs that revolve around the miscalculation and misuse of the variable 'overhead_size'. 'overhead_size' is the size of the various header structures used during communication. The first bug is the use of 'sizeof' with the pointer of a structure instead of the structure itself - resulting in the wrong size being computed. This is then used in a check to see if the payload (data_size) would be to large for the preallocated structure. Since the bug produces a smaller value for the overhead, it was possible for the structure to be breached. (Although the current users of the code do not currently send enough data to trigger this bug.) The second bug is that the 'overhead_size' value is used to compute how much of the preallocated space should be cleared before populating it with fresh data. This should have simply been 'sizeof(struct cn_msg)' not overhead_size. The fact that 'overhead_size' was computed incorrectly made this problem "less bad" - leaving only a pointer's worth of space at the end uncleared. Thus, this bug was never producing a bad result, but still needs to be fixed - especially now that the value is computed correctly. Cc: stable@kernel.org Signed-off-by: Jonathan Brassow diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c index 54abf9e..f1c8cae 100644 --- a/drivers/md/dm-log-userspace-transfer.c +++ b/drivers/md/dm-log-userspace-transfer.c @@ -172,11 +172,15 @@ int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type, { int r = 0; size_t dummy = 0; - int overhead_size = - sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg); + int overhead_size = sizeof(struct dm_ulog_request) + sizeof(struct cn_msg); struct dm_ulog_request *tfr = prealloced_ulog_tfr; struct receiving_pkg pkg; + /* + * Given the space needed to hold the 'struct cn_msg' and + * 'struct dm_ulog_request' - do we have enough payload + * space remaining? + */ if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) { DMINFO("Size of tfr exceeds preallocated size"); return -EINVAL; @@ -191,7 +195,7 @@ resend: */ mutex_lock(&dm_ulog_lock); - memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size); + memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg)); memcpy(tfr->uuid, uuid, DM_UUID_LEN); tfr->luid = luid; tfr->seq = dm_ulog_seq++; -- cgit v0.10.2 From 5528d17de1cf1462f285c40ccaf8e0d0e4c64dc0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 16 Feb 2010 18:42:55 +0000 Subject: dm raid1: fail writes if errors are not handled and log fails If the mirror log fails when the handle_errors option was not selected and there is no remaining valid mirror leg, writes return success even though they weren't actually written to any device. This patch completes them with EIO instead. This code path is taken: do_writes: bio_list_merge(&ms->failures, &sync); do_failures: if (!get_valid_mirror(ms)) (false) else if (errors_handled(ms)) (false) else bio_endio(bio, 0); The logic in do_failures is based on presuming that the write was already tried: if it succeeded at least on one leg (without handle_errors) it is reported as success. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=555197 Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index ad779bd..6c1046d 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -724,7 +724,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) /* * Dispatch io. */ - if (unlikely(ms->log_failure)) { + if (unlikely(ms->log_failure) && errors_handled(ms)) { spin_lock_irq(&ms->lock); bio_list_merge(&ms->failures, &sync); spin_unlock_irq(&ms->lock); -- cgit v0.10.2 From 558569aa9d83e016295bac77d900342908d7fd85 Mon Sep 17 00:00:00 2001 From: Takahiro Yasui Date: Tue, 16 Feb 2010 18:42:58 +0000 Subject: dm raid1: fix null pointer dereference in suspend When suspending a failed mirror, bios are completed by mirror_end_io() and __rh_lookup() in dm_rh_dec() returns NULL where a non-NULL return value is required by design. Fix this by not changing the state of the recovery failed region from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end(). Issue On 2.6.33-rc1 kernel, I hit the bug when I suspended the failed mirror by dmsetup command. BUG: unable to handle kernel NULL pointer dereference at 00000020 IP: [] dm_rh_dec+0x35/0xa1 [dm_region_hash] ... EIP: 0060:[] EFLAGS: 00010046 CPU: 0 EIP is at dm_rh_dec+0x35/0xa1 [dm_region_hash] EAX: 00000286 EBX: 00000000 ECX: 00000286 EDX: 00000000 ESI: eff79eac EDI: eff79e80 EBP: f6915cd4 ESP: f6915cc4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process dmsetup (pid: 2849, ti=f6914000 task=eff03e80 task.ti=f6914000) ... Call Trace: [] ? mirror_end_io+0x53/0x1b1 [dm_mirror] [] ? clone_endio+0x4d/0xa2 [dm_mod] [] ? mirror_end_io+0x0/0x1b1 [dm_mirror] [] ? clone_endio+0x0/0xa2 [dm_mod] [] ? bio_endio+0x28/0x2b [] ? hold_bio+0x2d/0x62 [dm_mirror] [] ? mirror_presuspend+0xeb/0xf7 [dm_mirror] [] ? vmap_page_range+0xb/0xd [] ? suspend_targets+0x2d/0x3b [dm_mod] [] ? dm_table_presuspend_targets+0xe/0x10 [dm_mod] [] ? dm_suspend+0x4d/0x150 [dm_mod] [] ? dev_suspend+0x55/0x18a [dm_mod] [] ? _copy_from_user+0x42/0x56 [] ? dm_ctl_ioctl+0x22c/0x281 [dm_mod] [] ? dev_suspend+0x0/0x18a [dm_mod] [] ? dm_ctl_ioctl+0x0/0x281 [dm_mod] [] ? vfs_ioctl+0x22/0x85 [] ? do_vfs_ioctl+0x4cb/0x516 [] ? sys_ioctl+0x40/0x5a [] ? sysenter_do_call+0x12/0x28 Analysis When recovery process of a region failed, dm_rh_recovery_end() function changes the state of the region from RM_RH_RECOVERING to DM_RH_NOSYNC. When recovery_complete() is executed between dm_rh_update_states() and dm_writes() in do_mirror(), bios are processed with the region state, DM_RH_NOSYNC. However, the region data is freed without checking its pending count when dm_rh_update_states() is called next time. When bios are finished by mirror_end_io(), __rh_lookup() in dm_rh_dec() returns NULL even though a valid return value are expected. Solution Remove the state change of the recovery failed region from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end(). We can remove the state change because: - If the region data has been released by dm_rh_update_states(), a new region data is created with the state of DM_RH_NOSYNC, and bios are processed according to the DM_RH_NOSYNC state. - If the region data has not been released by dm_rh_update_states(), a state of the region is DM_RH_RECOVERING and bios are put in the delayed_bio list. The flag change from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end() was added in the following commit: dm raid1: handle resync failures author Jonathan Brassow Thu, 12 Jul 2007 16:29:04 +0000 (17:29 +0100) http://git.kernel.org/linus/f44db678edcc6f4c2779ac43f63f0b9dfa28b724 Signed-off-by: Takahiro Yasui Reviewed-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index 5f19ceb..168bd38 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -660,10 +660,9 @@ void dm_rh_recovery_end(struct dm_region *reg, int success) spin_lock_irq(&rh->region_lock); if (success) list_add(®->list, ®->rh->recovered_regions); - else { - reg->state = DM_RH_NOSYNC; + else list_add(®->list, ®->rh->failed_recovered_regions); - } + spin_unlock_irq(&rh->region_lock); rh->wakeup_workers(rh->context); -- cgit v0.10.2 From 9eef87da2a8ea4920e0d913ff977cac064b68ee0 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Tue, 16 Feb 2010 18:43:01 +0000 Subject: dm mpath: fix stall when requeueing io This patch fixes the problem that system may stall if target's ->map_rq returns DM_MAPIO_REQUEUE in map_request(). E.g. stall happens on 1 CPU box when a dm-mpath device with queue_if_no_path bounces between all-paths-down and paths-up on I/O load. When target's ->map_rq returns DM_MAPIO_REQUEUE, map_request() requeues the request and returns to dm_request_fn(). Then, dm_request_fn() doesn't exit the I/O dispatching loop and continues processing the requeued request again. This map and requeue loop can be done with interrupt disabled, so 1 CPU system can be stalled if this situation happens. For example, commands below can stall my 1 CPU box within 1 minute or so: # dmsetup table mp mp: 0 2097152 multipath 1 queue_if_no_path 0 1 1 service-time 0 1 2 8:144 1 1 # while true; do dd if=/dev/mapper/mp of=/dev/null bs=1M count=100; done & # while true; do \ > dmsetup message mp 0 "fail_path 8:144" \ > dmsetup suspend --noflush mp \ > dmsetup resume mp \ > dmsetup message mp 0 "reinstate_path 8:144" \ > done To fix the problem above, this patch changes dm_request_fn() to exit the I/O dispatching loop once if a request is requeued in map_request(). Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 3167480..aa4e2aa 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1595,10 +1595,15 @@ static int dm_prep_fn(struct request_queue *q, struct request *rq) return BLKPREP_OK; } -static void map_request(struct dm_target *ti, struct request *clone, - struct mapped_device *md) +/* + * Returns: + * 0 : the request has been processed (not requeued) + * !0 : the request has been requeued + */ +static int map_request(struct dm_target *ti, struct request *clone, + struct mapped_device *md) { - int r; + int r, requeued = 0; struct dm_rq_target_io *tio = clone->end_io_data; /* @@ -1625,6 +1630,7 @@ static void map_request(struct dm_target *ti, struct request *clone, case DM_MAPIO_REQUEUE: /* The target wants to requeue the I/O */ dm_requeue_unmapped_request(clone); + requeued = 1; break; default: if (r > 0) { @@ -1636,6 +1642,8 @@ static void map_request(struct dm_target *ti, struct request *clone, dm_kill_unmapped_request(clone, r); break; } + + return requeued; } /* @@ -1677,12 +1685,17 @@ static void dm_request_fn(struct request_queue *q) atomic_inc(&md->pending[rq_data_dir(clone)]); spin_unlock(q->queue_lock); - map_request(ti, clone, md); + if (map_request(ti, clone, md)) + goto requeued; + spin_lock_irq(q->queue_lock); } goto out; +requeued: + spin_lock_irq(q->queue_lock); + plug_and_out: if (!elv_queue_empty(q)) /* Some requests still remain, retry later */ -- cgit v0.10.2 From 9307f6b19ac4f5887552b5b2992f391b866f7633 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Tue, 16 Feb 2010 18:43:04 +0000 Subject: dm: sysfs revert add empty release function to avoid debug warning Revert commit d2bb7df8cac647b92f51fb84ae735771e7adbfa7 at Greg's request. Author: Milan Broz Date: Thu Dec 10 23:51:53 2009 +0000 dm: sysfs add empty release function to avoid debug warning This patch just removes an unnecessary warning: kobject: 'dm': does not have a release() function, it is broken and must be fixed. The kobject is embedded in mapped device struct, so code does not need to release memory explicitly here. Cc: Greg KH Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c index f53392d..f91b409 100644 --- a/drivers/md/dm-sysfs.c +++ b/drivers/md/dm-sysfs.c @@ -80,20 +80,12 @@ static struct sysfs_ops dm_sysfs_ops = { }; /* - * The sysfs structure is embedded in md struct, nothing to do here - */ -static void dm_sysfs_release(struct kobject *kobj) -{ -} - -/* * dm kobject is embedded in mapped_device structure * no need to define release function here */ static struct kobj_type dm_ktype = { .sysfs_ops = &dm_sysfs_ops, .default_attrs = dm_attrs, - .release = dm_sysfs_release }; /* -- cgit v0.10.2 From 1cab819b5e244e1b853c7b440981e6a960da3bfb Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 11 Feb 2010 13:48:29 +0000 Subject: ethtool: allow non-admin user to read GRO settings. Looks like an oversight in GRO design. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/core/ethtool.c b/net/core/ethtool.c index d8aee58..236a998 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -927,6 +927,7 @@ int dev_ethtool(struct net *net, struct ifreq *ifr) case ETHTOOL_GPERMADDR: case ETHTOOL_GUFO: case ETHTOOL_GGSO: + case ETHTOOL_GGRO: case ETHTOOL_GFLAGS: case ETHTOOL_GPFLAGS: case ETHTOOL_GRXFH: -- cgit v0.10.2 From 10e7454ed7a2da39f1f6255f63d7df27ab4bb67f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 15 Feb 2010 19:24:30 +0000 Subject: ipcomp: Avoid duplicate calls to ipcomp_destroy When ipcomp_tunnel_attach fails we will call ipcomp_destroy twice. This may lead to double-frees on certain structures. As there is no reason to explicitly call ipcomp_destroy, this patch removes it from ipcomp*.c and lets the standard xfrm_state destruction take place. This is based on the discovery and patch by Alexey Dobriyan. Tested-by: Alexey Dobriyan Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index 38fbf04..544ce08 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -124,16 +124,12 @@ static int ipcomp4_init_state(struct xfrm_state *x) if (x->props.mode == XFRM_MODE_TUNNEL) { err = ipcomp_tunnel_attach(x); if (err) - goto error_tunnel; + goto out; } err = 0; out: return err; - -error_tunnel: - ipcomp_destroy(x); - goto out; } static const struct xfrm_type ipcomp_type = { diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index 2f2a5ca..002e6ee 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -154,16 +154,12 @@ static int ipcomp6_init_state(struct xfrm_state *x) if (x->props.mode == XFRM_MODE_TUNNEL) { err = ipcomp6_tunnel_attach(x); if (err) - goto error_tunnel; + goto out; } err = 0; out: return err; -error_tunnel: - ipcomp_destroy(x); - - goto out; } static const struct xfrm_type ipcomp6_type = -- cgit v0.10.2 From 553f9118abc4fc53674fff87f6fe5fa3f56a41ed Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 15 Feb 2010 20:00:51 +0000 Subject: xfrm: Fix xfrm_state_clone leak xfrm_state_clone calls kfree instead of xfrm_state_put to free a failed state. Depending on the state of the failed state, it can cause leaks to things like module references. All states should be freed by xfrm_state_put past the point of xfrm_init_state. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index b36cc34..f445ea1 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1102,7 +1102,7 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, int *errp) int err = -ENOMEM; struct xfrm_state *x = xfrm_state_alloc(net); if (!x) - goto error; + goto out; memcpy(&x->id, &orig->id, sizeof(x->id)); memcpy(&x->sel, &orig->sel, sizeof(x->sel)); @@ -1160,16 +1160,10 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, int *errp) return x; error: + xfrm_state_put(x); +out: if (errp) *errp = err; - if (x) { - kfree(x->aalg); - kfree(x->ealg); - kfree(x->calg); - kfree(x->encap); - kfree(x->coaddr); - } - kfree(x); return NULL; } -- cgit v0.10.2 From 07793d33b4fba00f5bd1dac78fa038bb0e23fa5c Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 16 Feb 2010 00:18:46 +0000 Subject: be2net: set proper value to version field in req hdr Before sending a command to the ASIC, set version properly. This is necessary for the ARM firmware to send correct data to the driver. This also fixes a bug in certain skews of the ASIC where the statistics are misreported. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index fee6eee..006cb2e 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -296,6 +296,7 @@ static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, req_hdr->opcode = opcode; req_hdr->subsystem = subsystem; req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr)); + req_hdr->version = 0; } static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages, -- cgit v0.10.2 From d4a4683ca054ed9917dfc9e3ff0f7ecf74ad90d6 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Mon, 15 Feb 2010 09:37:46 -0800 Subject: USB: usbfs: only copy the actual data received We need to only copy the data received by the device to userspace, not the whole kernel buffer, which can contain "stale" data. Thanks to Marcus Meissner for pointing this out and testing the fix. Reported-by: Marcus Meissner Tested-by: Marcus Meissner Cc: Alan Stern Cc: Linus Torvalds Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6e8bcdf..ca948bb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) goto err_out; if (put_user(as->status, &userurb->status)) goto err_out; @@ -1475,9 +1475,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) return -EFAULT; if (put_user(as->status, &userurb->status)) return -EFAULT; -- cgit v0.10.2 From ddeee0b2eec2a51b0712b04de4b39e7bec892a53 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 16 Feb 2010 12:35:07 -0800 Subject: USB: usbfs: properly clean up the as structure on error paths I notice that the processcompl_compat() function seems to be leaking the 'struct async *as' in the error paths. I think that the calling convention is fundamentally buggered. The caller is the one that did the "reap_as()" to get the as thing, the caller should be the one to free it too. Freeing it in the caller also means that it very clearly always gets freed, and avoids the need for any "free in the error case too". From: Linus Torvalds Cc: Alan Stern Cc: Marcus Meissner Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ca948bb..a678186 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg) } } - free_async(as); - if (put_user(addr, (void __user * __user *)arg)) return -EFAULT; return 0; err_out: - free_async(as); return -EFAULT; } @@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps) static int proc_reapurb(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl(as, (void __user * __user *)arg); + as = async_getcompleted(ps); + retval = -EAGAIN; + if (as) { + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } #ifdef CONFIG_COMPAT @@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) } } - free_async(as); if (put_user(ptr_to_compat(addr), (u32 __user *)arg)) return -EFAULT; return 0; @@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl_compat(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl_compat(as, (void __user * __user *)arg); + retval = -EAGAIN; + as = async_getcompleted(ps); + if (as) { + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } -- cgit v0.10.2 From a7787e508acb4378d62f4584bae3dd1cd0ba3eac Mon Sep 17 00:00:00 2001 From: Radek Liboska Date: Wed, 27 Jan 2010 15:38:34 +0100 Subject: USB: ftdi_sio: new device id for papouch AD4USB added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4USB communicates via USB. Powered is also via USB. datasheet in english is here: http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf Signed-off-by: Radek Liboska diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 216f187..f6d8566 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -697,6 +697,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index da92b49..2478130 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -968,6 +968,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ /* * Marvell SheevaPlug -- cgit v0.10.2 From 39232b3d8046eace9985fd898b763c585f989099 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sat, 16 Jan 2010 19:52:17 +0100 Subject: USB: storage: Remove unneeded SC/PR from unusual_devs.h This patch removes the subclass and protocol entries from a Microtech entry in unusual_devs.h. This was reported by . Greg, please apply. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c932f90..49575fba 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -941,7 +941,7 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, -- cgit v0.10.2 From 65e1ec6751b3eefee6d94161185e78736366126f Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Sun, 17 Jan 2010 11:45:38 +0100 Subject: USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f6d8566..7638828 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -50,7 +50,7 @@ * Version Information */ #define DRIVER_VERSION "v1.5.0" -#define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober " +#define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober , Andreas Mohr" #define DRIVER_DESC "USB FTDI Serial Converters Driver" static int debug; @@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +/* + * Device ID not listed? Test via module params product/vendor or + * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! + */ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, /* - * Due to many user requests for multiple ELV devices we enable - * them by default. + * ELV devices: */ + { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, @@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 2478130..c8951ae 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -38,6 +38,8 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ + /* OOCDlink by Joern Kaipf * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -161,22 +163,37 @@ /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). + * Further IDs taken from ELV Windows .inf file. * * The previously included PID for the UO 100 module was incorrect. * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ +#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ +#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ +#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ +#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ +#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ +#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ +#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ +#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ +#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ +#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -- cgit v0.10.2 From ae3a07924f0a31b96d52bf16bdf1713445a5a414 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 18 Jan 2010 12:03:18 +0000 Subject: USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR() The build of r8a66597-udc was failing on ARM since IS_ERR() and PTR_ERR() weren't protyped. Presumably err.h is being pulled in by another header on other platforms. Signed-off-by: Mark Brown Acked-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index e220fb8..8b45145 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 6feb63b69f4f6e876ea5a2edc6119b8e7ac90102 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 18 Jan 2010 13:18:34 +0000 Subject: USB: s3c-hsotg: Export usb_gadget_register_driver() USB gadget controller drivers normally export their driver registration function, allowing modular builds of the individual gadget drivers so do so for s3c-hsotg, fixing builds. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 4b5dbd0..5fc80a1 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2582,6 +2582,7 @@ err: hsotg->gadget.dev.driver = NULL; return ret; } +EXPORT_SYMBOL(usb_gadget_register_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { -- cgit v0.10.2 From b9df794258de24d10b0616634d4c30d8b6e9d381 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Tue, 19 Jan 2010 16:31:31 +0800 Subject: USB: ehci: phy low power mode bug fixing 1. There are two msleep calls inside two spin lock sections, need to unlock and lock again after msleep. 2. Save a extra status reg setting. Signed-off-by: Alek Du Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c75d927..1937267 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -196,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -904,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); -- cgit v0.10.2 From bbcb8bbad52b8795912e8f02c2b319092b96078e Mon Sep 17 00:00:00 2001 From: Tanaka Akira Date: Thu, 21 Jan 2010 02:31:09 +0900 Subject: USB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUS This patch adds the USB product ID of KAIREN's USB VGA Adaptor, USB20SVGA-MB-PLUS, to sisusbvga work with it. Signed-off-by: Tanaka Akira Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 0025847..8b37a4b 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, + { USB_DEVICE(0x0711, 0x0920) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } -- cgit v0.10.2 From 1ebca9dad5abe8b2ed4dbd186cd657fb47c1f321 Mon Sep 17 00:00:00 2001 From: Richard Farina Date: Wed, 20 Jan 2010 16:42:33 -0500 Subject: USB: serial: add usbid for dell wwan card to sierra.c This patch adds support for Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port. I stole the name from lsusb, but my card does not have a GPS on it (at least not that I can make function). I'm sure the patch is whitespace damaged but the one line addition should be fairly straightforward nonetheless. Tested-by: Rick Farina Signed-off-by: Rick Farina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ac1b644..3eb6143 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } }; -- cgit v0.10.2 From 1a02d59aba9b61b820517fb135086471c065b573 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 27 Jan 2010 17:09:34 +0300 Subject: kfifo: Make kfifo_initialized work after kfifo_free After kfifo rework it's no longer possible to reliably know if kfifo is usable, since after kfifo_free(), kfifo_initialized() would still return true. The correct behaviour is needed for at least FHCI USB driver. This patch fixes the issue by resetting the kfifo to zero values (the same approach is used in kfifo_alloc() if allocation failed). Signed-off-by: Anton Vorontsov Acked-by: Stefani Seibold Signed-off-by: Greg Kroah-Hartman diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 498cabb..559fb55 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -97,6 +97,7 @@ EXPORT_SYMBOL(kfifo_alloc); void kfifo_free(struct kfifo *fifo) { kfree(fifo->buffer); + _kfifo_init(fifo, NULL, 0); } EXPORT_SYMBOL(kfifo_free); -- cgit v0.10.2 From 4c743d0ae60462e91465483dd87f4458d71af550 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 27 Jan 2010 17:09:36 +0300 Subject: USB: FHCI: Fix build after kfifo rework After kfifo rework FHCI fails to build: CC drivers/usb/host/fhci-tds.o drivers/usb/host/fhci-tds.c: In function 'fhci_ep0_free': drivers/usb/host/fhci-tds.c:108: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:118: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:128: error: used struct type value where scalar is required This is because kfifos are no longer pointers in the ep struct. So, instead of checking the pointers, we should now check if kfifo is initialized. Reported-by: Josh Boyer Signed-off-by: Anton Vorontsov Acked-by: Stefani Seibold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index d224ab4..e123289 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb) if (ep->td_base) cpm_muram_free(cpm_muram_offset(ep->td_base)); - if (ep->conf_frame_Q) { + if (kfifo_initialized(&ep->conf_frame_Q)) { size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->conf_frame_Q); @@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->conf_frame_Q); } - if (ep->empty_frame_Q) { + if (kfifo_initialized(&ep->empty_frame_Q)) { size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->empty_frame_Q); @@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->empty_frame_Q); } - if (ep->dummy_packets_Q) { + if (kfifo_initialized(&ep->dummy_packets_Q)) { size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { u8 *buff = cq_get(&ep->dummy_packets_Q); -- cgit v0.10.2 From 5a5e0f4c7038168e38d1db6af09d1ac715ee9888 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 27 Jan 2010 17:09:38 +0300 Subject: kfifo: Don't use integer as NULL pointer This patch fixes following sparse warnings: include/linux/kfifo.h:127:25: warning: Using plain integer as NULL pointer kernel/kfifo.c:83:21: warning: Using plain integer as NULL pointer Signed-off-by: Anton Vorontsov Acked-by: Stefani Seibold Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 6f6c5f3..bc0fc79 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -124,7 +124,7 @@ extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo, */ static inline bool kfifo_initialized(struct kfifo *fifo) { - return fifo->buffer != 0; + return fifo->buffer != NULL; } /** diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 559fb55..35edbe22 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -80,7 +80,7 @@ int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask) buffer = kmalloc(size, gfp_mask); if (!buffer) { - _kfifo_init(fifo, 0, 0); + _kfifo_init(fifo, NULL, 0); return -ENOMEM; } -- cgit v0.10.2 From dbe4a99d846e565f0f99914cc82658cd9ce60bdc Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Fri, 22 Jan 2010 15:18:21 +0100 Subject: USB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usage g_multi used CONFIG_USB_ETH_RNDIS to check if RNDIS option was requested where it should check for CONFIG_USB_G_MULTI_RNDIS. As a result, RNDIS was never present in g_multi regardless of configuration. This fixes changes made in commit 396cda90d228d0851f3d64c7c85a1ecf6b8ae1e8. Signed-off-by: Michal Nazarewicz Cc: Marek Szyprowski Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 4295601..76496f5 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -29,7 +29,7 @@ #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif -#ifdef CONFIG_USB_ETH_RNDIS +#ifdef CONFIG_USB_G_MULTI_RNDIS # define USB_ETH_RNDIS y #endif -- cgit v0.10.2 From dd091c7b3280d4811b855d034fa91519fd3485ef Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 20 Jan 2010 20:06:31 +0100 Subject: USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_USB_ULPI=y, CONFIG_USB<=m, CONFIG_PCI=n and CONFIG_USB_OTG_UTILS=n, which is the default used for mx31moboard, the build for all mx3 platforms fails because drivers/usb/otg/ulpi.c where otg_ulpi_create is defined is not compiled. Build error: arch/arm/mach-mx3/built-in.o: In function `mxc_board_init': kzmarm11.c:(.init.text+0x73c): undefined reference to `otg_ulpi_create' kzmarm11.c:(.init.text+0x1020): undefined reference to `otg_ulpi_create' This isn't a strong dependency as drivers/usb/otg/ulpi.c doesn't use functions defined in drivers/usb/otg/otg.o and is only needed to get ulpi.o linked into the kernel image. Signed-off-by: Valentin Longchamp Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index de56b3d..3d2d3e5 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -44,6 +44,7 @@ config ISP1301_OMAP config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM + select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. -- cgit v0.10.2 From 31e5d4abceaa3d11ff583ddf76ec292e90eacb7d Mon Sep 17 00:00:00 2001 From: Brian Niebuhr Date: Mon, 25 Jan 2010 14:45:40 -0600 Subject: USB: gadget: fix EEM gadget CRC usage eem_wrap() is sending a sentinel CRC, but it didn't indicate that to the host, it should zero bit 14 (bmCRC) in the EEM packet header, instead of setting it. Also remove a redundant crc calculation in eem_unwrap(). Signed-off-by: Steve Longerbeam Acked-by: Brian Niebuhr Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 0a577d5..d4f0db5 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -358,7 +358,7 @@ done: * b15: bmType (0 == data) */ len = skb->len; - put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2)); + put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); /* add a zero-length EEM packet, if needed */ if (padlen) @@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port, } /* validate CRC */ - crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); if (header & BIT(14)) { crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); -- cgit v0.10.2 From 7c0ff870d1ed287504a61ed865f3d728c757436b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 3 Feb 2010 23:13:24 -0800 Subject: sysfs: sysfs_sd_setattr set iattrs unconditionally There is currently a bug in sysfs_sd_setattr inherited from sysfs_setattr in 2.6.32 where the first time we set the attributes on a sysfs file we allocate backing store but do not set the backing store attributes. Resulting in overly restrictive permissions on sysfs files. The fix is to simply modify the code so that it always executes when we update the sysfs attributes, as we did in 2.6.31 and earlier. Signed-off-by: Eric W. Biederman Tested-by: Jean Delvare Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c index 220b758..6a06a1d 100644 --- a/fs/sysfs/inode.c +++ b/fs/sysfs/inode.c @@ -81,24 +81,23 @@ int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr * iattr) if (!sd_attrs) return -ENOMEM; sd->s_iattr = sd_attrs; - } else { - /* attributes were changed at least once in past */ - iattrs = &sd_attrs->ia_iattr; - - if (ia_valid & ATTR_UID) - iattrs->ia_uid = iattr->ia_uid; - if (ia_valid & ATTR_GID) - iattrs->ia_gid = iattr->ia_gid; - if (ia_valid & ATTR_ATIME) - iattrs->ia_atime = iattr->ia_atime; - if (ia_valid & ATTR_MTIME) - iattrs->ia_mtime = iattr->ia_mtime; - if (ia_valid & ATTR_CTIME) - iattrs->ia_ctime = iattr->ia_ctime; - if (ia_valid & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - iattrs->ia_mode = sd->s_mode = mode; - } + } + /* attributes were changed at least once in past */ + iattrs = &sd_attrs->ia_iattr; + + if (ia_valid & ATTR_UID) + iattrs->ia_uid = iattr->ia_uid; + if (ia_valid & ATTR_GID) + iattrs->ia_gid = iattr->ia_gid; + if (ia_valid & ATTR_ATIME) + iattrs->ia_atime = iattr->ia_atime; + if (ia_valid & ATTR_MTIME) + iattrs->ia_mtime = iattr->ia_mtime; + if (ia_valid & ATTR_CTIME) + iattrs->ia_ctime = iattr->ia_ctime; + if (ia_valid & ATTR_MODE) { + umode_t mode = iattr->ia_mode; + iattrs->ia_mode = sd->s_mode = mode; } return 0; } -- cgit v0.10.2 From 18d19c96457d172d913510c083bc7411ed40cb10 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 10 Feb 2010 13:32:49 +0100 Subject: class: Free the class private data in class_release Fix a memory leak by freeing the memory allocated in __class_register for the class private data. Signed-off-by: Laurent Pinchart Acked-by: Artem Bityutskiy Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/class.c b/drivers/base/class.c index 161746d..6e2c3b0 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -59,6 +59,8 @@ static void class_release(struct kobject *kobj) else pr_debug("class '%s' does not have a release() function, " "be careful\n", class->name); + + kfree(cp); } static struct sysfs_ops class_sysfs_ops = { -- cgit v0.10.2 From bca476139d2ded86be146dae09b06e22548b67f3 Mon Sep 17 00:00:00 2001 From: Dick Hollenbeck Date: Wed, 9 Dec 2009 12:31:34 -0800 Subject: serial: 8250: add serial transmitter fully empty test When controlling an industrial radio modem it can be necessary to manipulate the handshake lines in order to control the radio modem's transmitter, from userspace. The transmitter should not be turned off before all characters have been transmitted. serial8250_tx_empty() was reporting that all characters were transmitted before they actually were. === Discovered in parallel with more testing and analysis by Kees Schoenmakers as follows: I ran into an NetMos 9835 serial pci board which behaves a little different than the standard. This type of expansion board is very common. "Standard" 8250 compatible devices clear the 'UART_LST_TEMT" bit together with the "UART_LSR_THRE" bit when writing data to the device. The NetMos device does it slightly different I believe that the TEMT bit is coupled to the shift register. The problem is that after writing data to the device and very quickly after that one does call serial8250_tx_empty, it returns the wrong information. My patch makes the test more robust (and solves the problem) and it does not affect the already correct devices. Alan: We may yet need to quirk this but now we know which chips we have a way to do that should we find this breaks some other 8250 clone with dodgy THRE. Signed-off-by: Dick Hollenbeck Signed-off-by: Alan Cox Cc: Kees Schoenmakers Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c3e37c8e..e9b15c3 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -83,6 +83,9 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define PASS_LIMIT 256 +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + /* * We default to IRQ0 for the "no irq" hack. Some * machine types want others as well - they're free @@ -1792,7 +1795,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; spin_unlock_irqrestore(&up->port.lock, flags); - return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; } static unsigned int serial8250_get_mctrl(struct uart_port *port) @@ -1850,8 +1853,6 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - /* * Wait for transmitter & holding register to empty */ -- cgit v0.10.2 From fee099b278894a1c7383a08cb3c62a5b62a134e8 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 12 Jan 2010 22:48:00 -0600 Subject: [SCSI] iscsi_tcp regression: remove bogus warn on in write path An empty r2tqueue is a valid state. It just means that we have processed all that there was to do. This patch removes the WARN_ON that was added when the kfifo changes were merged. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index db6856c..4ad87fd 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -992,12 +992,10 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t == NULL) { if (kfifo_out(&tcp_task->r2tqueue, (void *)&tcp_task->r2t, sizeof(void *)) != - sizeof(void *)) { - WARN_ONCE(1, "unexpected fifo state"); + sizeof(void *)) r2t = NULL; - } - - r2t = tcp_task->r2t; + else + r2t = tcp_task->r2t; } spin_unlock_bh(&session->lock); } -- cgit v0.10.2 From 10897ae71dd6e205969726e0f817f3327ef32f83 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Thu, 21 Jan 2010 10:15:44 -0800 Subject: [SCSI] libfc: call ddp setup for only FCP reads to avoid accessing junk fsp pointer Adds check to call fc_fcp_ddp_setup for only FCP read cmds to avoid accessing junk fsp pointer at least in ESX since non FCP frame had junk fsp value, though fsp is implicitly initialized to null by __alloc_skb but with this patch no more relying on fsp initialized to null value and hitting junk fsp ptr access. Removes fsp pointer checking in fc_fcp_ddp_setup as this is not needed any more since its only caller for FCP read will always have a valid fsp. Reported by: Frank Zhang Reported by: Rob Love Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 19d711c..7f43647 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1890,7 +1890,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; - if (ep->xid <= lport->lro_xid) + if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); if (unlikely(lport->tt.frame_send(lport, fp))) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 881d5df..6fde2fa 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -298,9 +298,6 @@ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) { struct fc_lport *lport; - if (!fsp) - return; - lport = fsp->lp; if ((fsp->req_flags & FC_SRB_READ) && (lport->lro_enabled) && (lport->tt.ddp_setup)) { -- cgit v0.10.2 From 3b709150b73205710d05128b925090aac048ed23 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Thu, 21 Jan 2010 10:15:49 -0800 Subject: [SCSI] libfc: Fix e_d_tov ns -> ms scaling factor in PLOGI response. Both PLOGI and RTV response processing conditionally scale e_d_tov, but use different scaling factors. The scaling factor is correct in RTV response processing. Bring PLOGI e_d_tov scaling in line with RTV common service parameter inspection. Signed-off-by: Hugh Daschbach Acked-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 0230052..97923bb 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -623,7 +623,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, tov = ntohl(plp->fl_csp.sp_e_d_tov); if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) - tov /= 1000; + tov /= 1000000; if (tov > rdata->e_d_tov) rdata->e_d_tov = tov; csp_seq = ntohs(plp->fl_csp.sp_tot_seq); -- cgit v0.10.2 From b248df30fca3aeee1d650b570e8cbc4e8cc45710 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Thu, 21 Jan 2010 10:15:55 -0800 Subject: [SCSI] libfc: Don't assume response request present. Fix NULL pointer dereference crash occurs in fc_lport_bsg_request() for bsg requests that do not contain a response request. Specifically, FC_BSG_HST_ADD_RPORT and FC_BSG_HST_DEL_RPORT bsg requests are not guaranteed to include a response request. Signed-off-by: Hugh Daschbach Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 0b16502..7ec8ce7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1800,7 +1800,8 @@ int fc_lport_bsg_request(struct fc_bsg_job *job) u32 did; job->reply->reply_payload_rcv_len = 0; - rsp->resid_len = job->reply_payload.payload_len; + if (rsp) + rsp->resid_len = job->reply_payload.payload_len; mutex_lock(&lport->lp_mutex); -- cgit v0.10.2 From f47dd855d9e64a5d499a93e858a82bc5e7b21345 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Thu, 21 Jan 2010 10:16:00 -0800 Subject: [SCSI] libfcoe: Send port LKA every FIP_VN_KA_PERIOD secs. libfcoe module doesnt send port keep alive every FIP_VN_KA_PERIOD due to improper assignment of timeout value. Update the port_ka_time appropriately by incrementing it by FIP_VN_KA_PERIOD in fcoe_ctlr_timeout(), so that the link_work is scheduled to send the port LKA. Signed-off-by: Bhanu Gollapudi Acked-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 9823291..511cb6b 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -1187,7 +1187,7 @@ static void fcoe_ctlr_timeout(unsigned long arg) next_timer = fip->ctlr_ka_time; if (time_after_eq(jiffies, fip->port_ka_time)) { - fip->port_ka_time += jiffies + + fip->port_ka_time = jiffies + msecs_to_jiffies(FIP_VN_KA_PERIOD); fip->send_port_ka = 1; } -- cgit v0.10.2 From 6409ea65b3b81ef693cbbc7c4b2300e50a4219dd Mon Sep 17 00:00:00 2001 From: Rob Love Date: Thu, 21 Jan 2010 10:16:05 -0800 Subject: [SCSI] fcoe: Only rmmod fcoe.ko if there are no active connections Currently we're gracefully tearing down each active connection when fcoe.ko is removed. We shouldn't allow the user to destroy connections by removing the module. We should force the user to destroy each connection and then the module can be removed. This patch makes it so a refrerence count on the module is taken each time a fcoe_interface is created. The reference count is dropped when the fcoe_interface is destroyed. This makes it so that module_exit() doesn't get called unless all fcoe_interfaces have been destroyed. This patch leaves the removal of interfaces in the module_exit routine so that if the user does a 'rmmod -f' we'll clean everything up before removing the module. The module_put line was put before the out_putdev goto line because we should only be decrementing the reference count if a fcoe_interface is actually destroyed. If we can't find the netdev or the fcoe_interface then it's assumed that something else has destroyed the fcoe_interface and it would have decremented the reference count at that time. Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 10be9f3..2f47ae7 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2009,6 +2009,8 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) fcoe_interface_cleanup(fcoe); rtnl_unlock(); fcoe_if_destroy(fcoe->ctlr.lp); + module_put(THIS_MODULE); + out_putdev: dev_put(netdev); out_nodev: @@ -2059,6 +2061,11 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) } #endif + if (!try_module_get(THIS_MODULE)) { + rc = -EINVAL; + goto out_nomod; + } + rtnl_lock(); netdev = fcoe_if_to_netdev(buffer); if (!netdev) { @@ -2099,17 +2106,24 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) if (!fcoe_link_ok(lport)) fcoe_ctlr_link_up(&fcoe->ctlr); - rc = 0; -out_free: /* * Release from init in fcoe_interface_create(), on success lport * should be holding a reference taken in fcoe_if_create(). */ fcoe_interface_put(fcoe); + dev_put(netdev); + rtnl_unlock(); + mutex_unlock(&fcoe_config_mutex); + + return 0; +out_free: + fcoe_interface_put(fcoe); out_putdev: dev_put(netdev); out_nodev: rtnl_unlock(); + module_put(THIS_MODULE); +out_nomod: mutex_unlock(&fcoe_config_mutex); return rc; } -- cgit v0.10.2 From b72c7d543589736d43da531566490dd31572f5ca Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 17 Feb 2010 17:17:01 +0000 Subject: omap: Remove DEBUG_FS dependency for mux name checking The check for a valid mux name should be performed regardless of whether DEBUG_FS is enabled or not. Otherwise without DEBUG_FS, we get: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc8 #10) PC is at strcmp+0x18/0x40 LR is at omap_mux_init_signal+0x68/0x14c ... This fixes the issue currently seen with boards not booting up if DEBUG_FS is not enabled in defconfig. Note that the earlier ifndef + ifdef now becomes simpler ifdef else: If CONFIG_OMAP_MUX is selected, we use pin names. If it's not selected, we only want the GPIO to mux register mapping. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 5fedc50..5fef73f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset) while (superset->reg_offset != OMAP_MUX_TERMINATOR) { struct omap_mux *entry; -#ifndef CONFIG_OMAP_MUX - /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { +#ifdef CONFIG_OMAP_MUX + if (!superset->muxnames || !superset->muxnames[0]) { superset++; continue; } -#endif - -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) - if (!superset->muxnames || !superset->muxnames[0]) { +#else + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { superset++; continue; } -- cgit v0.10.2 From 172d2d0041fdd4f3617dbdff8296bf279db3d5fb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 17 Feb 2010 16:42:08 -0800 Subject: sparc64: Sync of_create_pci_dev() with drivers/pci/probe.c changes. Mirrors powerpc commits bb209c8287d2d55ec4a67e3933346e0a3ee0da76 ("powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge()") and 26b4a0ca46985ae9586c194f7859f3838b1230f8 ("powerpc/pci: Add missing hookup to pci_slot") We also need to initialize ->dma_mask explicitly here too. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 539e83f..592b03d 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -247,6 +247,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, struct pci_bus *bus, int devfn) { struct dev_archdata *sd; + struct pci_slot *slot; struct of_device *op; struct pci_dev *dev; const char *type; @@ -286,6 +287,11 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->dev.bus = &pci_bus_type; dev->devfn = devfn; dev->multifunction = 0; /* maybe a lie? */ + set_pcie_port_type(dev); + + list_for_each_entry(slot, &dev->bus->slots, list) + if (PCI_SLOT(dev->devfn) == slot->number) + dev->slot = slot; dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff); dev->device = of_getintprop_default(node, "device-id", 0xffff); @@ -322,6 +328,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; if (!strcmp(node->name, "pci")) { /* a PCI-PCI bridge */ -- cgit v0.10.2 From d7ecfb3c2aa155c9f6152ebe91de92067d16ba6e Mon Sep 17 00:00:00 2001 From: Kristoffer Glembo Date: Mon, 15 Feb 2010 16:10:28 +0100 Subject: sparc: Fix incorrect comparison in of_bus_ambapp_match() Use type instead of name in comparison. Signed-off-by: Kristoffer Glembo Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 4c26eb5..53a58b3 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -105,7 +105,7 @@ static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags) static int of_bus_ambapp_match(struct device_node *np) { - return !strcmp(np->name, "ambapp"); + return !strcmp(np->type, "ambapp"); } static void of_bus_ambapp_count_cells(struct device_node *child, -- cgit v0.10.2 From 01d4503968f471f876fb44335800d2cf8dc5a2ce Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 31 Jan 2010 07:07:14 +1000 Subject: drm/radeon/kms: use udelay for short delays For usec delays use udelay instead of scheduling, this should allow reclocking to happen faster. This also was the cause of reported 33s delays at bootup on certain systems. fixes: freedesktop.org bug 25506 Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 2a3df55..7f152f6 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -643,7 +643,7 @@ static void atom_op_delay(atom_exec_context *ctx, int *ptr, int arg) uint8_t count = U8((*ptr)++); SDEBUG(" count: %d\n", count); if (arg == ATOM_UNIT_MICROSEC) - schedule_timeout_uninterruptible(usecs_to_jiffies(count)); + udelay(count); else schedule_timeout_uninterruptible(msecs_to_jiffies(count)); } -- cgit v0.10.2 From f2d12b8e2c05e86b1a2070efcc07f1b8a79afb4c Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 15 Feb 2010 14:45:22 +0000 Subject: drm/vmwgfx: Use fb handover mechanism instead of stealth mode. When the vmwgfx module is loaded on top of vesafb, it would operate in stealth mode in parallel with vesafb, evicting VRAM on dropmaster. Change that to use the vesafb handover mechanism, like other drmfb drivers. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index a6e8f68..0c9c081 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -348,22 +348,19 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) */ DRM_INFO("It appears like vesafb is loaded. " - "Ignore above error if any. Entering stealth mode.\n"); + "Ignore above error if any.\n"); ret = pci_request_region(dev->pdev, 2, "vmwgfx stealth probe"); if (unlikely(ret != 0)) { DRM_ERROR("Failed reserving the SVGA MMIO resource.\n"); goto out_no_device; } - vmw_kms_init(dev_priv); - vmw_overlay_init(dev_priv); - } else { - ret = vmw_request_device(dev_priv); - if (unlikely(ret != 0)) - goto out_no_device; - vmw_kms_init(dev_priv); - vmw_overlay_init(dev_priv); - vmw_fb_init(dev_priv); } + ret = vmw_request_device(dev_priv); + if (unlikely(ret != 0)) + goto out_no_device; + vmw_kms_init(dev_priv); + vmw_overlay_init(dev_priv); + vmw_fb_init(dev_priv); dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; register_pm_notifier(&dev_priv->pm_nb); @@ -406,17 +403,15 @@ static int vmw_driver_unload(struct drm_device *dev) unregister_pm_notifier(&dev_priv->pm_nb); - if (!dev_priv->stealth) { - vmw_fb_close(dev_priv); - vmw_kms_close(dev_priv); - vmw_overlay_close(dev_priv); - vmw_release_device(dev_priv); - pci_release_regions(dev->pdev); - } else { - vmw_kms_close(dev_priv); - vmw_overlay_close(dev_priv); + vmw_fb_close(dev_priv); + vmw_kms_close(dev_priv); + vmw_overlay_close(dev_priv); + vmw_release_device(dev_priv); + if (dev_priv->stealth) pci_release_region(dev->pdev, 2); - } + else + pci_release_regions(dev->pdev); + if (dev_priv->capabilities & SVGA_CAP_IRQMASK) drm_irq_uninstall(dev_priv->dev); if (dev->devname == vmw_devname) @@ -585,11 +580,6 @@ static int vmw_master_set(struct drm_device *dev, int ret = 0; DRM_INFO("Master set.\n"); - if (dev_priv->stealth) { - ret = vmw_request_device(dev_priv); - if (unlikely(ret != 0)) - return ret; - } if (active) { BUG_ON(active != &dev_priv->fbdev_master); @@ -649,18 +639,11 @@ static void vmw_master_drop(struct drm_device *dev, ttm_lock_set_kill(&vmaster->lock, true, SIGTERM); - if (dev_priv->stealth) { - ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM); - if (unlikely(ret != 0)) - DRM_ERROR("Unable to clean VRAM on master drop.\n"); - vmw_release_device(dev_priv); - } dev_priv->active_master = &dev_priv->fbdev_master; ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM); ttm_vt_unlock(&dev_priv->fbdev_master.lock); - if (!dev_priv->stealth) - vmw_fb_on(dev_priv); + vmw_fb_on(dev_priv); } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 4f4f643..a933670 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -559,6 +559,9 @@ int vmw_fb_init(struct vmw_private *vmw_priv) info->pixmap.scan_align = 1; #endif + info->aperture_base = vmw_priv->vram_start; + info->aperture_size = vmw_priv->vram_size; + /* * Dirty & Deferred IO */ -- cgit v0.10.2 From b58db2c6dd18d35f59862d3352c86a0a58838bf3 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 15 Feb 2010 22:15:39 +0000 Subject: drm/edid: Fix interlaced detailed timings to be frame size, not field. cf. https://bugzilla.redhat.com/show_bug.cgi?id=533561 Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f665b05..ab6c973 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -598,6 +598,50 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, return mode; } +/* + * EDID is delightfully ambiguous about how interlaced modes are to be + * encoded. Our internal representation is of frame height, but some + * HDTV detailed timings are encoded as field height. + * + * The format list here is from CEA, in frame size. Technically we + * should be checking refresh rate too. Whatever. + */ +static void +drm_mode_do_interlace_quirk(struct drm_display_mode *mode, + struct detailed_pixel_timing *pt) +{ + int i; + static const struct { + int w, h; + } cea_interlaced[] = { + { 1920, 1080 }, + { 720, 480 }, + { 1440, 480 }, + { 2880, 480 }, + { 720, 576 }, + { 1440, 576 }, + { 2880, 576 }, + }; + static const int n_sizes = + sizeof(cea_interlaced)/sizeof(cea_interlaced[0]); + + if (!(pt->misc & DRM_EDID_PT_INTERLACED)) + return; + + for (i = 0; i < n_sizes; i++) { + if ((mode->hdisplay == cea_interlaced[i].w) && + (mode->vdisplay == cea_interlaced[i].h / 2)) { + mode->vdisplay *= 2; + mode->vsync_start *= 2; + mode->vsync_end *= 2; + mode->vtotal *= 2; + mode->vtotal |= 1; + } + } + + mode->flags |= DRM_MODE_FLAG_INTERLACE; +} + /** * drm_mode_detailed - create a new mode from an EDID detailed timing section * @dev: DRM device (needed to create new mode) @@ -680,8 +724,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, drm_mode_set_name(mode); - if (pt->misc & DRM_EDID_PT_INTERLACED) - mode->flags |= DRM_MODE_FLAG_INTERLACE; + drm_mode_do_interlace_quirk(mode, pt); if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) { pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE; -- cgit v0.10.2 From 91cb91becf372b5308cdd7d2e15b2e3ef66bae7e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 15 Feb 2010 21:36:13 +0100 Subject: drm/radeon/kms: fix indirect buffer management V2 There is 3 different distinct states for an indirect buffer (IB) : 1- free with no fence 2- free with a fence 3- non free (fence doesn't matter) Previous code mixed case 2 & 3 in a single one leading to possible catastrophique failure. This patch rework the handling and properly separate each case. So when you get ib we set the ib as non free and fence status doesn't matter. Fence become active (ie has a meaning for the ib code) once the ib is scheduled or free. This patch also get rid of the alloc bitmap as it was overkill, we know go through IB pool list like in a ring buffer as the oldest IB is the first one the will be free. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=26438 and likely other bugs. V2 remove the scheduled list, it's useless now, fix free ib scanning Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index af1c3ca..446b765 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -543,9 +543,6 @@ int r600_vb_ib_get(struct radeon_device *rdev) void r600_vb_ib_put(struct radeon_device *rdev) { radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence); - mutex_lock(&rdev->ib_pool.mutex); - list_add_tail(&rdev->r600_blit.vb_ib->list, &rdev->ib_pool.scheduled_ibs); - mutex_unlock(&rdev->ib_pool.mutex); radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index f57480b..c0356bb 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -96,6 +96,7 @@ extern int radeon_audio; * symbol; */ #define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */ +/* RADEON_IB_POOL_SIZE must be a power of 2 */ #define RADEON_IB_POOL_SIZE 16 #define RADEON_DEBUGFS_MAX_NUM_FILES 32 #define RADEONFB_CONN_LIMIT 4 @@ -363,11 +364,12 @@ void radeon_irq_kms_sw_irq_put(struct radeon_device *rdev); */ struct radeon_ib { struct list_head list; - unsigned long idx; + unsigned idx; uint64_t gpu_addr; struct radeon_fence *fence; - uint32_t *ptr; + uint32_t *ptr; uint32_t length_dw; + bool free; }; /* @@ -377,10 +379,9 @@ struct radeon_ib { struct radeon_ib_pool { struct mutex mutex; struct radeon_bo *robj; - struct list_head scheduled_ibs; struct radeon_ib ibs[RADEON_IB_POOL_SIZE]; bool ready; - DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE); + unsigned head_id; }; struct radeon_cp { diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 4d12b2d..694799f 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -41,68 +41,55 @@ int radeon_ib_get(struct radeon_device *rdev, struct radeon_ib **ib) { struct radeon_fence *fence; struct radeon_ib *nib; - unsigned long i; - int r = 0; + int r = 0, i, c; *ib = NULL; r = radeon_fence_create(rdev, &fence); if (r) { - DRM_ERROR("failed to create fence for new IB\n"); + dev_err(rdev->dev, "failed to create fence for new IB\n"); return r; } mutex_lock(&rdev->ib_pool.mutex); - i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); - if (i < RADEON_IB_POOL_SIZE) { - set_bit(i, rdev->ib_pool.alloc_bm); - rdev->ib_pool.ibs[i].length_dw = 0; - *ib = &rdev->ib_pool.ibs[i]; - mutex_unlock(&rdev->ib_pool.mutex); - goto out; + for (i = rdev->ib_pool.head_id, c = 0, nib = NULL; c < RADEON_IB_POOL_SIZE; c++, i++) { + i &= (RADEON_IB_POOL_SIZE - 1); + if (rdev->ib_pool.ibs[i].free) { + nib = &rdev->ib_pool.ibs[i]; + break; + } } - if (list_empty(&rdev->ib_pool.scheduled_ibs)) { - /* we go do nothings here */ + if (nib == NULL) { + /* This should never happen, it means we allocated all + * IB and haven't scheduled one yet, return EBUSY to + * userspace hoping that on ioctl recall we get better + * luck + */ + dev_err(rdev->dev, "no free indirect buffer !\n"); mutex_unlock(&rdev->ib_pool.mutex); - DRM_ERROR("all IB allocated none scheduled.\n"); - r = -EINVAL; - goto out; + radeon_fence_unref(&fence); + return -EBUSY; } - /* get the first ib on the scheduled list */ - nib = list_entry(rdev->ib_pool.scheduled_ibs.next, - struct radeon_ib, list); - if (nib->fence == NULL) { - /* we go do nothings here */ + rdev->ib_pool.head_id = (nib->idx + 1) & (RADEON_IB_POOL_SIZE - 1); + nib->free = false; + if (nib->fence) { mutex_unlock(&rdev->ib_pool.mutex); - DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx); - r = -EINVAL; - goto out; - } - mutex_unlock(&rdev->ib_pool.mutex); - - r = radeon_fence_wait(nib->fence, false); - if (r) { - DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx, - (unsigned long)nib->gpu_addr, nib->length_dw); - DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n"); - goto out; + r = radeon_fence_wait(nib->fence, false); + if (r) { + dev_err(rdev->dev, "error waiting fence of IB(%u:0x%016lX:%u)\n", + nib->idx, (unsigned long)nib->gpu_addr, nib->length_dw); + mutex_lock(&rdev->ib_pool.mutex); + nib->free = true; + mutex_unlock(&rdev->ib_pool.mutex); + radeon_fence_unref(&fence); + return r; + } + mutex_lock(&rdev->ib_pool.mutex); } radeon_fence_unref(&nib->fence); - + nib->fence = fence; nib->length_dw = 0; - - /* scheduled list is accessed here */ - mutex_lock(&rdev->ib_pool.mutex); - list_del(&nib->list); - INIT_LIST_HEAD(&nib->list); mutex_unlock(&rdev->ib_pool.mutex); - *ib = nib; -out: - if (r) { - radeon_fence_unref(&fence); - } else { - (*ib)->fence = fence; - } - return r; + return 0; } void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib) @@ -114,18 +101,7 @@ void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib) return; } mutex_lock(&rdev->ib_pool.mutex); - if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) { - /* IB is scheduled & not signaled don't do anythings */ - mutex_unlock(&rdev->ib_pool.mutex); - return; - } - list_del(&tmp->list); - INIT_LIST_HEAD(&tmp->list); - if (tmp->fence) - radeon_fence_unref(&tmp->fence); - - tmp->length_dw = 0; - clear_bit(tmp->idx, rdev->ib_pool.alloc_bm); + tmp->free = true; mutex_unlock(&rdev->ib_pool.mutex); } @@ -135,7 +111,7 @@ int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib) if (!ib->length_dw || !rdev->cp.ready) { /* TODO: Nothings in the ib we should report. */ - DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx); + DRM_ERROR("radeon: couldn't schedule IB(%u).\n", ib->idx); return -EINVAL; } @@ -148,7 +124,8 @@ int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib) radeon_ring_ib_execute(rdev, ib); radeon_fence_emit(rdev, ib->fence); mutex_lock(&rdev->ib_pool.mutex); - list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs); + /* once scheduled IB is considered free and protected by the fence */ + ib->free = true; mutex_unlock(&rdev->ib_pool.mutex); radeon_ring_unlock_commit(rdev); return 0; @@ -164,7 +141,6 @@ int radeon_ib_pool_init(struct radeon_device *rdev) if (rdev->ib_pool.robj) return 0; /* Allocate 1M object buffer */ - INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs); r = radeon_bo_create(rdev, NULL, RADEON_IB_POOL_SIZE*64*1024, true, RADEON_GEM_DOMAIN_GTT, &rdev->ib_pool.robj); @@ -195,9 +171,9 @@ int radeon_ib_pool_init(struct radeon_device *rdev) rdev->ib_pool.ibs[i].ptr = ptr + offset; rdev->ib_pool.ibs[i].idx = i; rdev->ib_pool.ibs[i].length_dw = 0; - INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list); + rdev->ib_pool.ibs[i].free = true; } - bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); + rdev->ib_pool.head_id = 0; rdev->ib_pool.ready = true; DRM_INFO("radeon: ib pool ready.\n"); if (radeon_debugfs_ib_init(rdev)) { @@ -214,7 +190,6 @@ void radeon_ib_pool_fini(struct radeon_device *rdev) return; } mutex_lock(&rdev->ib_pool.mutex); - bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); if (rdev->ib_pool.robj) { r = radeon_bo_reserve(rdev->ib_pool.robj, false); if (likely(r == 0)) { @@ -363,7 +338,7 @@ static int radeon_debugfs_ib_info(struct seq_file *m, void *data) if (ib == NULL) { return 0; } - seq_printf(m, "IB %04lu\n", ib->idx); + seq_printf(m, "IB %04u\n", ib->idx); seq_printf(m, "IB fence %p\n", ib->fence); seq_printf(m, "IB size %05u dwords\n", ib->length_dw); for (i = 0; i < ib->length_dw; i++) { -- cgit v0.10.2 From 94429bb6c8343722544e282d89dc4638672e49b4 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 15 Feb 2010 21:36:33 +0100 Subject: drm/radeon/kms: fix bo's fence association Previous code did associate fence to bo before the fence was emited and it also didn't lock protected access to ttm sync_obj member. Both of this flaw leads to possible race between different code path. This patch fix this by associating fence only once the fence is emitted and properly lock protect access to sync_obj member of ttm. Fix: https://bugs.freedesktop.org/show_bug.cgi?id=26438 and likely similar others bugs Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 1190148..e9d0850 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -86,7 +86,7 @@ int radeon_cs_parser_relocs(struct radeon_cs_parser *p) &p->validated); } } - return radeon_bo_list_validate(&p->validated, p->ib->fence); + return radeon_bo_list_validate(&p->validated); } int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) @@ -189,12 +189,10 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (error && parser->ib) { - radeon_bo_list_unvalidate(&parser->validated, - parser->ib->fence); - } else { - radeon_bo_list_unreserve(&parser->validated); + if (!error && parser->ib) { + radeon_bo_list_fence(&parser->validated, parser->ib->fence); } + radeon_bo_list_unreserve(&parser->validated); for (i = 0; i < parser->nrelocs; i++) { if (parser->relocs[i].gobj) { mutex_lock(&parser->rdev->ddev->struct_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index d72a71b..f1da370 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -306,11 +306,10 @@ void radeon_bo_list_unreserve(struct list_head *head) } } -int radeon_bo_list_validate(struct list_head *head, void *fence) +int radeon_bo_list_validate(struct list_head *head) { struct radeon_bo_list *lobj; struct radeon_bo *bo; - struct radeon_fence *old_fence = NULL; int r; r = radeon_bo_list_reserve(head); @@ -334,32 +333,27 @@ int radeon_bo_list_validate(struct list_head *head, void *fence) } lobj->gpu_offset = radeon_bo_gpu_offset(bo); lobj->tiling_flags = bo->tiling_flags; - if (fence) { - old_fence = (struct radeon_fence *)bo->tbo.sync_obj; - bo->tbo.sync_obj = radeon_fence_ref(fence); - bo->tbo.sync_obj_arg = NULL; - } - if (old_fence) { - radeon_fence_unref(&old_fence); - } } return 0; } -void radeon_bo_list_unvalidate(struct list_head *head, void *fence) +void radeon_bo_list_fence(struct list_head *head, void *fence) { struct radeon_bo_list *lobj; - struct radeon_fence *old_fence; - - if (fence) - list_for_each_entry(lobj, head, list) { - old_fence = to_radeon_fence(lobj->bo->tbo.sync_obj); - if (old_fence == fence) { - lobj->bo->tbo.sync_obj = NULL; - radeon_fence_unref(&old_fence); - } + struct radeon_bo *bo; + struct radeon_fence *old_fence = NULL; + + list_for_each_entry(lobj, head, list) { + bo = lobj->bo; + spin_lock(&bo->tbo.lock); + old_fence = (struct radeon_fence *)bo->tbo.sync_obj; + bo->tbo.sync_obj = radeon_fence_ref(fence); + bo->tbo.sync_obj_arg = NULL; + spin_unlock(&bo->tbo.lock); + if (old_fence) { + radeon_fence_unref(&old_fence); } - radeon_bo_list_unreserve(head); + } } int radeon_bo_fbdev_mmap(struct radeon_bo *bo, diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h index a02f180..7ab43de 100644 --- a/drivers/gpu/drm/radeon/radeon_object.h +++ b/drivers/gpu/drm/radeon/radeon_object.h @@ -156,8 +156,8 @@ extern void radeon_bo_list_add_object(struct radeon_bo_list *lobj, struct list_head *head); extern int radeon_bo_list_reserve(struct list_head *head); extern void radeon_bo_list_unreserve(struct list_head *head); -extern int radeon_bo_list_validate(struct list_head *head, void *fence); -extern void radeon_bo_list_unvalidate(struct list_head *head, void *fence); +extern int radeon_bo_list_validate(struct list_head *head); +extern void radeon_bo_list_fence(struct list_head *head, void *fence); extern int radeon_bo_fbdev_mmap(struct radeon_bo *bo, struct vm_area_struct *vma); extern int radeon_bo_set_tiling_flags(struct radeon_bo *bo, -- cgit v0.10.2 From 49bf83a45fc677db1ed44d0e072e6aaeabe4e124 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 16 Feb 2010 03:45:45 -0500 Subject: ACPI: fix "acpi=ht" boot option We broke "acpi=ht" in 2.6.32 by disabling MADT parsing for acpi=disabled. e5b8fc6ac158f65598f58dba2c0d52ba3b412f52 This also broke systems which invoked acpi=ht via DMI blacklist. acpi=ht is a really ugly hack, but restore it for those that still use it. http://bugzilla.kernel.org/show_bug.cgi?id=14886 Signed-off-by: Len Brown diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 7ae5889..e97b255 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -94,6 +94,7 @@ ia64_acpi_release_global_lock (unsigned int *lock) #define acpi_noirq 0 /* ACPI always enabled on IA64 */ #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ #define acpi_strict 1 /* no ACPI spec workarounds on IA64 */ +#define acpi_ht 0 /* no HT-only mode on IA64 */ #endif #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index f336bca7..8a0ed28 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -213,7 +213,7 @@ acpi_table_parse_entries(char *id, unsigned long table_end; acpi_size tbl_size; - if (acpi_disabled) + if (acpi_disabled && !acpi_ht) return -ENODEV; if (!handler) @@ -280,7 +280,7 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler) struct acpi_table_header *table = NULL; acpi_size tbl_size; - if (acpi_disabled) + if (acpi_disabled && !acpi_ht) return -ENODEV; if (!handler) -- cgit v0.10.2 From c2d1a2a11b9b29c3be1dd781dc88518ffab8d4be Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 17 Feb 2010 12:17:33 -0800 Subject: Input: i8042 - fix KBC jam during hibernate 633aae2 "Input: i8042 - switch to using dev_pm_ops" removed handling for PMSG_THAW, since we do not need to do anything during freeze and thus it was thougt that thaw is not needed as well. However, there is a period when interrupts are kept off, and if key happens to be pressed during that time KBC becomes jammed. To avoid the jam we simply need to poll KBC once during thaw. Signed-off-by: Alan Jenkins Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index d84a36e..b54aee7 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1161,9 +1161,17 @@ static int i8042_pm_restore(struct device *dev) return 0; } +static int i8042_pm_thaw(struct device *dev) +{ + i8042_interrupt(0, NULL); + + return 0; +} + static const struct dev_pm_ops i8042_pm_ops = { .suspend = i8042_pm_reset, .resume = i8042_pm_restore, + .thaw = i8042_pm_thaw, .poweroff = i8042_pm_reset, .restore = i8042_pm_restore, }; -- cgit v0.10.2 From 3b77fd8ee6a8ae34e349651e9d5f5000d1cc206e Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 17 Feb 2010 12:21:45 -0800 Subject: Input: add KEY_RFKILL Most laptops have keys that are intended to toggle all device state, not just wifi. These are currently generally mapped to KEY_WLAN. As a result, rfkill will only kill or enable wifi in response to the key press. This confuses users and can make it difficult for them to enable bluetooth and wwan devices. This patch adds a new keycode, KEY_RFKILL. It indicates that the system should toggle the state of all rfkillable devices. Signed-off-by: Matthew Garrett Acked-by: Marcel Holtmann Signed-off-by: Dmitry Torokhov diff --git a/include/linux/input.h b/include/linux/input.h index 735ceaf..663208a 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -376,6 +376,7 @@ struct input_absinfo { #define KEY_DISPLAY_OFF 245 /* display device to off state */ #define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ /* Range 248 - 255 is reserved for special needs of AT keyboard driver */ -- cgit v0.10.2 From 6c09f09d44690d341d970559b64779bef8b9236b Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Tue, 16 Feb 2010 07:57:43 +0100 Subject: ARM: 5938/1: ARM: L2: export outer_cache_fns The 'outer_cache' variable is needed by the outer_inv_range(), outer_clean_range() and outer_flush_range() functions, which are declared as inline in asm/cacheflush.h. Otherwise drivers built as a loadable module, which access these functions, will have an undefined symbol. Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c6c57b6..621acad 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache; #endif #ifdef CONFIG_OUTER_CACHE struct outer_cache_fns outer_cache; +EXPORT_SYMBOL(outer_cache); #endif struct stack { -- cgit v0.10.2 From f8b55f251012e104093e105483c45c5d85ad3040 Mon Sep 17 00:00:00 2001 From: Christine Caulfield Date: Thu, 18 Feb 2010 11:33:13 +0000 Subject: Orphan DECnet Due to lack of time, space, motivation, hardware and probably expertise, I have reluctantly decided to orphan the DECnet code in the kernel. Judging by the deafening silence on the linux-decnet mailing list I suspect it's either not being used anyway, or the few people that are using it are happy with their older kernels. Signed-off-by: Christine Caulfield Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 412eff6..8ed3d0a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1733,10 +1733,9 @@ F: include/linux/tfrc.h F: net/dccp/ DECnet NETWORK LAYER -M: Christine Caulfield W: http://linux-decnet.sourceforge.net L: linux-decnet-user@lists.sourceforge.net -S: Maintained +S: Orphan F: Documentation/networking/decnet.txt F: net/decnet/ -- cgit v0.10.2 From b857df1acc634b18db1db2a40864af985100266e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 18 Feb 2010 18:07:18 +0100 Subject: ARM: 5944/1: scsi: fix timer setup in fas216.c mod_timer() takes an absolute time and not a delay as its argument. Cc: Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 4775426..9e71ac6 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2516,7 +2516,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) if (info->scsi.phase == PHASE_IDLE) fas216_kick(info); - mod_timer(&info->eh_timer, 30 * HZ); + mod_timer(&info->eh_timer, jiffies + 30 * HZ); spin_unlock_irqrestore(&info->host_lock, flags); /* -- cgit v0.10.2 From 079e1091a2901c81fc2d7ad2079344c3edab2c4d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 18 Feb 2010 21:54:11 +0200 Subject: Gemini: wrong registers used to set reg_level in gpio_set_irq_type() It appears the wrong GPIO registers were used Signed-off-by: Roel Kluin Signed-off-by: Paulius Zaleckas diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index e726385..fe3bd5a 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type) unsigned int reg_both, reg_level, reg_type; reg_type = __raw_readl(base + GPIO_INT_TYPE); - reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE); + reg_level = __raw_readl(base + GPIO_INT_LEVEL); reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE); switch (type) { @@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type) } __raw_writel(reg_type, base + GPIO_INT_TYPE); - __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE); + __raw_writel(reg_level, base + GPIO_INT_LEVEL); __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); gpio_ack_irq(irq); -- cgit v0.10.2 From 083c88fcf1a89986ffa160826f96509fb4b370bb Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 18 Feb 2010 21:54:12 +0200 Subject: MAINTAINERS: fix my e-mail and status for Gemini and FA526 Signed-off-by: Paulius Zaleckas diff --git a/MAINTAINERS b/MAINTAINERS index 412eff6..44c669d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -616,10 +616,10 @@ M: Richard Purdie S: Maintained ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE -M: Paulius Zaleckas +M: Paulius Zaleckas L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://gitorious.org/linux-gemini/mainline.git -S: Maintained +S: Odd Fixes F: arch/arm/mach-gemini/ ARM/EBSA110 MACHINE SUPPORT @@ -641,9 +641,9 @@ T: topgit git://git.openezx.org/openezx.git F: arch/arm/mach-pxa/ezx.c ARM/FARADAY FA526 PORT -M: Paulius Zaleckas +M: Paulius Zaleckas L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Odd Fixes F: arch/arm/mm/*-fa* ARM/FOOTBRIDGE ARCHITECTURE -- cgit v0.10.2 From c1db53b36633e6a7511dbec7c372f01a31528f0c Mon Sep 17 00:00:00 2001 From: Richard Guenther Date: Tue, 9 Feb 2010 20:16:03 -0300 Subject: V4L/DVB: dvb: l64781.ko broken with gcc 4.5 I'm trying to fix it on the GCC side (PR43007), but the module is quite stupid in using ULL constants to operate on u32 values: static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { ... static const u32 ppm = 8000; u32 spi_bias; ... spi_bias *= 1000ULL; spi_bias /= 1000ULL + ppm/1000; which causes current GCC 4.5 to emit calls to __udivdi3 for i?86 again. This patch fixes this issue. Signed-off-by: Richard Guenther Signed-off-by: Greg Kroah-Hartman CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 3051b64..445fa10 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -192,8 +192,8 @@ static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_pa spi_bias *= qam_tab[p->constellation]; spi_bias /= p->code_rate_HP + 1; spi_bias /= (guard_tab[p->guard_interval] + 32); - spi_bias *= 1000ULL; - spi_bias /= 1000ULL + ppm/1000; + spi_bias *= 1000; + spi_bias /= 1000 + ppm/1000; spi_bias *= p->code_rate_HP; val0x04 = (p->transmission_mode << 2) | p->guard_interval; -- cgit v0.10.2 From fc4a7f93087a48619005111895dcaa115f807399 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 10 Feb 2010 23:57:17 -0300 Subject: V4L/DVB: cxusb: Select all required frontend and tuner modules cxusb uses the atbm8830 and lgs8gxx (not lgs8gl5) frontends and the max2165 tuner, so it needs to select them. Signed-off-by: Ben Hutchings Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 1b24989..465295b 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -112,11 +112,13 @@ config DVB_USB_CXUSB select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select DVB_ATBM8830 if !DVB_FE_CUSTOMISE + select DVB_LGS8GXX if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode -- cgit v0.10.2 From 2b59125b1b5f8c9bb0524b8a0bdad4b780a239ac Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 2 Feb 2010 13:17:54 +0900 Subject: soc-camera: mt9t112: modify exiting conditions from standby mode This polling is needed if camera is in standby mode, but current exiting condition is inverted. Signed-off-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index fc4dd60..7438f8d 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -514,7 +514,7 @@ static int mt9t112_init_pll(const struct i2c_client *client) /* poll to verify out of standby. Must Poll this bit */ for (i = 0; i < 100; i++) { mt9t112_reg_read(data, client, 0x0018); - if (0x4000 & data) + if (!(0x4000 & data)) break; mdelay(10); -- cgit v0.10.2 From 53f68607caba85db9a73846ccd289e4b7fa96295 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 11 Feb 2010 10:50:31 -0300 Subject: V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad constant => sizeof conversion. Regression was caused by my commit 6b35ca0d3d586b8ecb8396821af21186e20afaf0 which determined message size using sizeof rather than hardcoded constants. Unfortunately pwc_set_shutter_speed reuses a 2 byte buffer for a one byte message too so the sizeof was bogus in this case. All other uses of sizeof checked and are ok. Acked-by: Laurent Pinchart Cc: stable@kernel.org Signed-off-by: Martin Fuzzey Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 50b415e..f7f7e04 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -753,7 +753,7 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) buf[0] = 0xff; /* fixed */ ret = send_control_msg(pdev, - SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf)); + SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1); if (!mode && ret >= 0) { if (value < 0) -- cgit v0.10.2 From 2434466432464110b5307757e0285dd41f15512e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 19 Feb 2010 00:18:41 -0300 Subject: V4L/DVB: bttv: Move I2C IR initialization Move I2C IR initialization from just after I2C bus setup to right before non-I2C IR initialization. This avoids the case where an I2C IR device is blocking audio support (at least the PV951 suffers from this). It is also more logical to group IR support together, regardless of the connectivity. This fixes bug #15184: http://bugzilla.kernel.org/show_bug.cgi?id=15184 Signed-off-by: Jean Delvare CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3182a40..ae08b07 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4461,6 +4461,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, request_modules(btv); } + init_bttv_i2c_ir(btv); bttv_input_init(btv); /* everything is fine */ diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 63aa31a..407fa61 100644 --- a/drivers/media/video/bt8xx/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -388,7 +388,12 @@ int __devinit init_bttv_i2c(struct bttv *btv) if (0 == btv->i2c_rc && i2c_scan) do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); - /* Instantiate the IR receiver device, if present */ + return btv->i2c_rc; +} + +/* Instantiate the I2C IR receiver device, if present */ +void __devinit init_bttv_i2c_ir(struct bttv *btv) +{ if (0 == btv->i2c_rc) { struct i2c_board_info info; /* The external IR receiver is at i2c address 0x34 (0x35 for @@ -408,7 +413,6 @@ int __devinit init_bttv_i2c(struct bttv *btv) strlcpy(info.type, "ir_video", I2C_NAME_SIZE); i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list); } - return btv->i2c_rc; } int __devexit fini_bttv_i2c(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index a1d0e9c..6cccc2a 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -279,6 +279,7 @@ extern unsigned int bttv_debug; extern unsigned int bttv_gpio; extern void bttv_gpio_tracking(struct bttv *btv, char *comment); extern int init_bttv_i2c(struct bttv *btv); +extern void init_bttv_i2c_ir(struct bttv *btv); extern int fini_bttv_i2c(struct bttv *btv); #define bttv_printk if (bttv_verbose) printk -- cgit v0.10.2 From 6f6ef82cc9de24153ba7d5cedab5970e276aefa1 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 26 Dec 2009 19:24:31 +0000 Subject: acer-wmi: Respect current backlight level when loading Set the backlight to use the current brightness when loaded, rather than always resetting the backlight to maximum brightness. Fixes kernel bugzilla #14207 Signed-off-by: Carlos Corbacho Reported-by: Denis Mukhin Signed-off-by: Len Brown diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 07d14df..226b3e9 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -934,7 +934,7 @@ static int __devinit acer_backlight_init(struct device *dev) acer_backlight_device = bd; bd->props.power = FB_BLANK_UNBLANK; - bd->props.brightness = max_brightness; + bd->props.brightness = read_brightness(bd); bd->props.max_brightness = max_brightness; backlight_update_status(bd); return 0; -- cgit v0.10.2 From 455c0d71d46e86b0b7ff2c9dcfc19bc162302ee9 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 18 Feb 2010 10:28:20 -0800 Subject: ACPI: Fix regression where _PPC is not read at boot even when ignore_ppc=0 Earlier, Ingo Molnar posted a patch to make it so that the kernel would avoid reading _PPC on his broken T60. Unfortunately, it seems that with Thomas Renninger's patch last July to eliminate _PPC evaluations when the processor driver loads, the kernel never actually reads _PPC at all! This is problematic if you happen to boot your non-T60 computer in a state where the BIOS _wants_ _PPC to be something other than zero. So, put the _PPC evaluation back into acpi_processor_get_performance_info if ignore_ppc isn't 1. Signed-off-by: Darrick J. Wong Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 2cabadc..a959f6a 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -413,7 +413,11 @@ static int acpi_processor_get_performance_info(struct acpi_processor *pr) if (result) goto update_bios; - return 0; + /* We need to call _PPC once when cpufreq starts */ + if (ignore_ppc != 1) + result = acpi_processor_get_platform_limit(pr); + + return result; /* * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that -- cgit v0.10.2 From ac278a9c505092dd82077a2446af8f9fc0d9c095 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Feb 2010 18:09:36 +0000 Subject: fix LOOKUP_FOLLOW on automount "symlinks" Make sure that automount "symlinks" are followed regardless of LOOKUP_FOLLOW; it should have no effect on them. Cc: stable@kernel.org Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index d62fdc8..a4855af 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -823,6 +823,17 @@ fail: } /* + * This is a temporary kludge to deal with "automount" symlinks; proper + * solution is to trigger them on follow_mount(), so that do_lookup() + * would DTRT. To be killed before 2.6.34-final. + */ +static inline int follow_on_final(struct inode *inode, unsigned lookup_flags) +{ + return inode && unlikely(inode->i_op->follow_link) && + ((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode)); +} + +/* * Name resolution. * This is the basic name resolution function, turning a pathname into * the final dentry. We expect 'base' to be positive and a directory. @@ -942,8 +953,7 @@ last_component: if (err) break; inode = next.dentry->d_inode; - if ((lookup_flags & LOOKUP_FOLLOW) - && inode && inode->i_op->follow_link) { + if (follow_on_final(inode, lookup_flags)) { err = do_follow_link(&next, nd); if (err) goto return_err; -- cgit v0.10.2 From 7fee4868be91e71a3ee8e57289ebf5e10a12297e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 14 Jan 2010 01:03:28 -0500 Subject: Switch proc/self to nd_set_link() Signed-off-by: Al Viro diff --git a/fs/proc/base.c b/fs/proc/base.c index e42bbd8..58324c2 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2369,16 +2369,30 @@ static void *proc_self_follow_link(struct dentry *dentry, struct nameidata *nd) { struct pid_namespace *ns = dentry->d_sb->s_fs_info; pid_t tgid = task_tgid_nr_ns(current, ns); - char tmp[PROC_NUMBUF]; - if (!tgid) - return ERR_PTR(-ENOENT); - sprintf(tmp, "%d", task_tgid_nr_ns(current, ns)); - return ERR_PTR(vfs_follow_link(nd,tmp)); + char *name = ERR_PTR(-ENOENT); + if (tgid) { + name = __getname(); + if (!name) + name = ERR_PTR(-ENOMEM); + else + sprintf(name, "%d", tgid); + } + nd_set_link(nd, name); + return NULL; +} + +static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd, + void *cookie) +{ + char *s = nd_get_link(nd); + if (!IS_ERR(s)) + __putname(s); } static const struct inode_operations proc_self_inode_operations = { .readlink = proc_self_readlink, .follow_link = proc_self_follow_link, + .put_link = proc_self_put_link, }; /* -- cgit v0.10.2 From 4e70af56319e56423d6eb1ce25fc321cdf8cd41d Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Mon, 15 Feb 2010 11:16:11 +0000 Subject: fs: inode - remove 8 bytes of padding on 64bits allowing 1 more objects/slab under slub This removes 8 bytes of padding from struct inode on 64bit builds, and so allows 1 more object/slab in the inode_cache when using slub. Signed-off-by: Richard Kennedy ---- patch against 2.6.33-rc8 compiled & tested on x86_64 AMDX2 I've been running this patch for over a week with no obvious problems regards Richard Signed-off-by: Al Viro diff --git a/include/linux/fs.h b/include/linux/fs.h index b1bcb27..ebb1cd5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -729,6 +729,7 @@ struct inode { uid_t i_uid; gid_t i_gid; dev_t i_rdev; + unsigned int i_blkbits; u64 i_version; loff_t i_size; #ifdef __NEED_I_SIZE_ORDERED @@ -738,7 +739,6 @@ struct inode { struct timespec i_mtime; struct timespec i_ctime; blkcnt_t i_blocks; - unsigned int i_blkbits; unsigned short i_bytes; umode_t i_mode; spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ -- cgit v0.10.2 From 84d710926797a6e317e7e94654a3ccd771cfd8a3 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 18 Feb 2010 16:00:59 +0100 Subject: hw-breakpoints: Accept breakpoints on NULL address Before we had a generic breakpoint API, ptrace was accepting breakpoints on NULL address in x86. The new API refuse them, without given strong reasons. We need to follow the previous behaviour as some userspace apps like Wine need such NULL breakpoints to ensure old emulated software protections are still working. This fixes a 2.6.32 - 2.6.33-x ptrace regression. Reported-and-tested-by: Michael Stefaniuc Signed-off-by: Frederic Weisbecker Acked-by: K.Prasad Acked-by: Roland McGrath Cc: Alan Stern Cc: Maneesh Soni Cc: Alexandre Julliard Cc: Rafael J. Wysocki Cc: Maciej Rutecki diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index 05d5fec..bb6006e 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -212,25 +212,6 @@ static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len) return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE); } -/* - * Store a breakpoint's encoded address, length, and type. - */ -static int arch_store_info(struct perf_event *bp) -{ - struct arch_hw_breakpoint *info = counter_arch_bp(bp); - /* - * For kernel-addresses, either the address or symbol name can be - * specified. - */ - if (info->name) - info->address = (unsigned long) - kallsyms_lookup_name(info->name); - if (info->address) - return 0; - - return -EINVAL; -} - int arch_bp_generic_fields(int x86_len, int x86_type, int *gen_len, int *gen_type) { @@ -362,10 +343,13 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp, return ret; } - ret = arch_store_info(bp); - - if (ret < 0) - return ret; + /* + * For kernel-addresses, either the address or symbol name can be + * specified. + */ + if (info->name) + info->address = (unsigned long) + kallsyms_lookup_name(info->name); /* * Check that the low-order bits of the address are appropriate * for the alignment implied by len. -- cgit v0.10.2 From 326264a02448b0ac51f78f178b78e830aa077a0b Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 18 Feb 2010 18:24:18 +0100 Subject: hw-breakpoint: Keep track of dr7 local enable bits When the user enables breakpoints through dr7, he can choose between "local" or "global" enable bits but given how linux is implemented, both have the same effect. That said we don't keep track how the user enabled the breakpoints so when the user requests the dr7 value, we only translate the "enabled" status using the global enabled bits. It means that if the user enabled a breakpoint using the local enabled bit, reading back dr7 will set the global bit and clear the local one. Apps like Wine expect a full dr7 POKEUSER/PEEKUSER match for emulated softwares that implement old reverse engineering protection schemes. We fix that by keeping track of the whole dr7 value given by the user in the thread structure to drop this bug. We'll think about something more proper later. This fixes a 2.6.32 - 2.6.33-x ptrace regression. Reported-and-tested-by: Michael Stefaniuc Signed-off-by: Frederic Weisbecker Acked-by: K.Prasad Cc: Alan Stern Cc: Maneesh Soni Cc: Alexandre Julliard Cc: Rafael J. Wysocki Cc: Maciej Rutecki diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index fc801ba..b753ea5 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -450,6 +450,8 @@ struct thread_struct { struct perf_event *ptrace_bps[HBP_NUM]; /* Debug status used for traps, single steps, etc... */ unsigned long debugreg6; + /* Keep track of the exact dr7 value set by the user */ + unsigned long ptrace_dr7; /* Fault info: */ unsigned long cr2; unsigned long trap_no; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 017d937..0c1033d 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -702,7 +702,7 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) } else if (n == 6) { val = thread->debugreg6; } else if (n == 7) { - val = ptrace_get_dr7(thread->ptrace_bps); + val = thread->ptrace_dr7; } return val; } @@ -778,8 +778,11 @@ int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val) return rc; } /* All that's left is DR7 */ - if (n == 7) + if (n == 7) { rc = ptrace_write_dr7(tsk, val); + if (!rc) + thread->ptrace_dr7 = val; + } ret_path: return rc; -- cgit v0.10.2 From 5e2f75b8993a0d83d469388b50716dd5551f2eb4 Mon Sep 17 00:00:00 2001 From: Dan Halperin Date: Thu, 18 Feb 2010 22:01:39 -0800 Subject: iwlwifi: set HT flags after channel in rxon The HT extension channel settings require priv->staging_rxon.channel to be accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel and thus HT40 could be broken unless another call to iwl_mac_config came in. This problem was recently introduced by "iwlwifi: Fix to set correct ht configuration" The particular setting in which I noticed this was monitor mode: iwconfig wlan0 mode monitor ifconfig wlan0 up ./iw wlan0 set channel 64 HT40- #./iw wlan0 set channel 64 HT40- tcpdump -i wlan0 -y IEEE802_11_RADIO would only catch HT40 packets if I issued the IW command twice. From visual inspection, iwl_set_rxon_channel does not depend on iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem. Signed-off-by: Daniel Halperin Acked-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index d10bea6..f36f804 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2744,8 +2744,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) priv->staging_rxon.flags = 0; - iwl_set_rxon_ht(priv, ht_conf); iwl_set_rxon_channel(priv, conf->channel); + iwl_set_rxon_ht(priv, ht_conf); iwl_set_flags_for_band(priv, conf->channel->band); spin_unlock_irqrestore(&priv->lock, flags); -- cgit v0.10.2 From b3dc1a212e5167984616445990c76056034f8eeb Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Thu, 11 Feb 2010 18:01:50 +0100 Subject: [SCSI] megaraid_sas: fix for 32bit apps It looks like this patch - commit 7b2519afa1abd1b9f63aa1e90879307842422dae Author: Yang, Bo Date: Tue Oct 6 14:52:20 2009 -0600 [SCSI] megaraid_sas: fix 64 bit sense pointer truncation has caused a problem for 32bit programs with 64bit os - http://bugzilla.kernel.org/show_bug.cgi?id=15001 fix by converting the user space 32bit pointer to a 64 bit one when needed. [jejb: fix up some 64 bit warnings] Signed-off-by: Tomas Henzl Cc: Bo Yang Signed-off-by: James Bottomley diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 708ea31..d9b8ca5 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -3781,6 +3781,7 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) compat_alloc_user_space(sizeof(struct megasas_iocpacket)); int i; int error = 0; + compat_uptr_t ptr; if (clear_user(ioc, sizeof(*ioc))) return -EFAULT; @@ -3793,9 +3794,22 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32))) return -EFAULT; - for (i = 0; i < MAX_IOCTL_SGE; i++) { - compat_uptr_t ptr; + /* + * The sense_ptr is used in megasas_mgmt_fw_ioctl only when + * sense_len is not null, so prepare the 64bit value under + * the same condition. + */ + if (ioc->sense_len) { + void __user **sense_ioc_ptr = + (void __user **)(ioc->frame.raw + ioc->sense_off); + compat_uptr_t *sense_cioc_ptr = + (compat_uptr_t *)(cioc->frame.raw + cioc->sense_off); + if (get_user(ptr, sense_cioc_ptr) || + put_user(compat_ptr(ptr), sense_ioc_ptr)) + return -EFAULT; + } + for (i = 0; i < MAX_IOCTL_SGE; i++) { if (get_user(ptr, &cioc->sgl[i].iov_base) || put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) || copy_in_user(&ioc->sgl[i].iov_len, -- cgit v0.10.2 From 2cc9116c2b37c525965d76a3e6def38913259427 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 16 Feb 2010 16:18:37 -0500 Subject: vgaarb: fix "target=default" passing Commit 77c1ff3982c6b36961725dd19e872a1c07df7f3b fixed the userspace pointer dereference, but introduced another bug pointed out by Eugene Teo in RH bug #564264. Instead of comparing the point we were at in the string, we instead compared the beginning of the string to "default". Signed-off-by: Kyle McMartin Reported-by: Eugene Teo Signed-off-by: Dave Airlie diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 24b56dc..2f6cf69 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -961,7 +961,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, remaining -= 7; pr_devel("client 0x%p called 'target'\n", priv); /* if target is default */ - if (!strncmp(kbuf, "default", 7)) + if (!strncmp(curr_pos, "default", 7)) pdev = pci_dev_get(vga_default_device()); else { if (!vga_pci_str_to_vars(curr_pos, remaining, -- cgit v0.10.2 From c86a90383638fa830c32cf086a1520be72167086 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Feb 2010 14:14:58 -0500 Subject: drm/radeon/kms/rs600: add connector quirk rs600 board lists DVI port as HDMI. Fixes fdo bug 26605 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 2dcda61..4d88315 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -206,6 +206,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *connector_type = DRM_MODE_CONNECTOR_DVID; } + /* Asrock RS600 board lists the DVI port as HDMI */ + if ((dev->pdev->device == 0x7941) && + (dev->pdev->subsystem_vendor == 0x1849) && + (dev->pdev->subsystem_device == 0x7941)) { + if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) && + (supported_device == ATOM_DEVICE_DFP3_SUPPORT)) + *connector_type = DRM_MODE_CONNECTOR_DVID; + } + /* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */ if ((dev->pdev->device == 0x7941) && (dev->pdev->subsystem_vendor == 0x147b) && -- cgit v0.10.2 From d3932d6c475f8307ac66b4ce21563285ec05f6ea Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Feb 2010 02:13:56 -0500 Subject: drm/radeon/kms: fix shared ddc detection Just compare the i2c id since the i2c structs may be slighly different. Fixes fdo bug 26616. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 2381885..65f8194 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -780,7 +780,7 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect * connected and the DVI port disconnected. If the edid doesn't * say HDMI, vice versa. */ - if (radeon_connector->shared_ddc && connector_status_connected) { + if (radeon_connector->shared_ddc && (ret == connector_status_connected)) { struct drm_device *dev = connector->dev; struct drm_connector *list_connector; struct radeon_connector *list_radeon_connector; @@ -1060,8 +1060,7 @@ radeon_add_atom_connector(struct drm_device *dev, return; } if (radeon_connector->ddc_bus && i2c_bus->valid) { - if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, - sizeof(struct radeon_i2c_bus_rec)) == 0) { + if (radeon_connector->ddc_bus->rec.i2c_id == i2c_bus->i2c_id) { radeon_connector->shared_ddc = true; shared_ddc = true; } -- cgit v0.10.2 From 6a660f06e8120977b25d30ace354c8f9dc3aff2a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Feb 2010 16:07:02 -0500 Subject: drm/radeon/rv740: fix backend setup This patch fixes occlusion queries and rendering errors on rv740 boards. Hardcoding the backend map is not an optimal solution, but a better fix is being worked on. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index 6d5a711..75bcf35 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -1428,9 +1428,12 @@ static void r700_gfx_init(struct drm_device *dev, gb_tiling_config |= R600_BANK_SWAPS(1); - backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes, - dev_priv->r600_max_backends, - (0xff << dev_priv->r600_max_backends) & 0xff); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740) + backend_map = 0x28; + else + backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes, + dev_priv->r600_max_backends, + (0xff << dev_priv->r600_max_backends) & 0xff); gb_tiling_config |= R600_BACKEND_MAP(backend_map); cc_gc_shader_pipe_config = diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 5943d56..0302167 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -549,9 +549,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) gb_tiling_config |= BANK_SWAPS(1); - backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes, - rdev->config.rv770.max_backends, - (0xff << rdev->config.rv770.max_backends) & 0xff); + if (rdev->family == CHIP_RV740) + backend_map = 0x28; + else + backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes, + rdev->config.rv770.max_backends, + (0xff << rdev->config.rv770.max_backends) & 0xff); gb_tiling_config |= BACKEND_MAP(backend_map); cc_gc_shader_pipe_config = -- cgit v0.10.2 From f0e2f38befa787f0267419082b33e8ac72269d77 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 20 Feb 2010 07:30:15 +1000 Subject: drm/ttm: fix caching problem on non-PAT systems. http://bugzilla.kernel.org/show_bug.cgi?id=15328 This fixes a serious regression on AGP/non-PAT systems, where pages were ending up in the wrong state and slowing down the whole system. [airlied: taken this from the bug as the other option is to revert the change which caused it]. Tested-by: John W. Linville (in bug). Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index e2123af..3d47a2c 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -196,14 +196,15 @@ EXPORT_SYMBOL(ttm_tt_populate); #ifdef CONFIG_X86 static inline int ttm_tt_set_page_caching(struct page *p, - enum ttm_caching_state c_state) + enum ttm_caching_state c_old, + enum ttm_caching_state c_new) { int ret = 0; if (PageHighMem(p)) return 0; - if (get_page_memtype(p) != -1) { + if (c_old != tt_cached) { /* p isn't in the default caching state, set it to * writeback first to free its current memtype. */ @@ -212,16 +213,17 @@ static inline int ttm_tt_set_page_caching(struct page *p, return ret; } - if (c_state == tt_wc) + if (c_new == tt_wc) ret = set_memory_wc((unsigned long) page_address(p), 1); - else if (c_state == tt_uncached) + else if (c_new == tt_uncached) ret = set_pages_uc(p, 1); return ret; } #else /* CONFIG_X86 */ static inline int ttm_tt_set_page_caching(struct page *p, - enum ttm_caching_state c_state) + enum ttm_caching_state c_old, + enum ttm_caching_state c_new) { return 0; } @@ -254,7 +256,9 @@ static int ttm_tt_set_caching(struct ttm_tt *ttm, for (i = 0; i < ttm->num_pages; ++i) { cur_page = ttm->pages[i]; if (likely(cur_page != NULL)) { - ret = ttm_tt_set_page_caching(cur_page, c_state); + ret = ttm_tt_set_page_caching(cur_page, + ttm->caching_state, + c_state); if (unlikely(ret != 0)) goto out_err; } @@ -268,7 +272,7 @@ out_err: for (j = 0; j < i; ++j) { cur_page = ttm->pages[j]; if (likely(cur_page != NULL)) { - (void)ttm_tt_set_page_caching(cur_page, + (void)ttm_tt_set_page_caching(cur_page, c_state, ttm->caching_state); } } -- cgit v0.10.2 From 7d404c7b5f4c004712bc15ed6e6edd6779842126 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 18 Feb 2010 13:13:29 +0000 Subject: drm/radeon/kms: free fence IB if it wasn't emited at IB free time If at IB free time fence wasn't emited that means the IB wasn't scheduled because an error occured somewhere, thus we can free then fence and mark the IB as free. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 694799f..6579eb4 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -100,6 +100,8 @@ void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib) if (tmp == NULL) { return; } + if (!tmp->fence->emited) + radeon_fence_unref(&tmp->fence); mutex_lock(&rdev->ib_pool.mutex); tmp->free = true; mutex_unlock(&rdev->ib_pool.mutex); -- cgit v0.10.2 From 635f1a31292087a2e99568bf4451c10ee287adaa Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 20 Feb 2010 09:17:18 +1000 Subject: drm/radeon: bump the UMS driver version number to indicate rv740 fix This lets UMS userspace know the rv740 fix is in. For KMS we can consider the kernel release to be the v2.0.0 release so we don't need the bump there. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index e137852..c57ad60 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -106,9 +106,10 @@ * 1.29- R500 3D cmd buffer support * 1.30- Add support for occlusion queries * 1.31- Add support for num Z pipes from GET_PARAM + * 1.32- fixes for rv740 setup */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 31 +#define DRIVER_MINOR 32 #define DRIVER_PATCHLEVEL 0 enum radeon_cp_microcode_version { -- cgit v0.10.2 From 1f474646fdc36b457606bbcd6a3592e6cbd31ac4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 19 Feb 2010 15:19:52 -0800 Subject: sparc64: Fix sun4u execute bit check in TSB I-TLB load. Thanks to testcase and report from Brad Spengler: -------------------- #include typedef int (* _wee)(void); int main(void) { char buf[8] = { '\x81', '\xc7', '\xe0', '\x08', '\x81', '\xe8', '\x00', '\x00' }; _wee wee; printf("%p\n", &buf); wee = (_wee)&buf; wee(); return 0; } -------------------- TSB I-tlb load code tries to use andcc to check the _PAGE_EXEC_4U bit, but that's bit 12 so it gets sign extended all the way up to bit 63 and the test nearly always passes as a result. Use sethi to fix the bug. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S index 8c91d9b..db15d12 100644 --- a/arch/sparc/kernel/tsb.S +++ b/arch/sparc/kernel/tsb.S @@ -191,10 +191,12 @@ tsb_dtlb_load: tsb_itlb_load: /* Executable bit must be set. */ -661: andcc %g5, _PAGE_EXEC_4U, %g0 - .section .sun4v_1insn_patch, "ax" +661: sethi %hi(_PAGE_EXEC_4U), %g4 + andcc %g5, %g4, %g0 + .section .sun4v_2insn_patch, "ax" .word 661b andcc %g5, _PAGE_EXEC_4V, %g0 + nop .previous be,pn %xcc, tsb_do_fault -- cgit v0.10.2 From 88af182e389097997c5e2a0b42285b3522796759 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 19 Feb 2010 13:22:59 +0000 Subject: net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 040c4f0..26dec2b 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1317,14 +1317,19 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write && *valp != val) { struct net *net = ctl->extra2; if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) { - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *valp = val; + *ppos = pos; return restart_syscall(); + } if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) { inet_forward_change(net); } else if (*valp) { diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index de7a194..143791d 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -502,8 +502,11 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old) if (p == &net->ipv6.devconf_dflt->forwarding) return 0; - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *p = old; return restart_syscall(); + } if (p == &net->ipv6.devconf_all->forwarding) { __s32 newf = net->ipv6.devconf_all->forwarding; @@ -4028,12 +4031,15 @@ int addrconf_sysctl_forward(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret; ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write) ret = addrconf_fixup_forwarding(ctl, valp, val); + if (ret) + *ppos = pos; return ret; } @@ -4075,8 +4081,11 @@ static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old) if (p == &net->ipv6.devconf_dflt->disable_ipv6) return 0; - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *p = old; return restart_syscall(); + } if (p == &net->ipv6.devconf_all->disable_ipv6) { __s32 newf = net->ipv6.devconf_all->disable_ipv6; @@ -4095,12 +4104,15 @@ int addrconf_sysctl_disable(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret; ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write) ret = addrconf_disable_ipv6(ctl, valp, val); + if (ret) + *ppos = pos; return ret; } -- cgit v0.10.2 From b8afe6416101549e877f8470f2a160df69676166 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 19 Feb 2010 13:23:47 +0000 Subject: net-sysfs: Use rtnl_trylock in wireless sysfs methods. The wireless sysfs methods like the rest of the networking sysfs methods are removed with the rtnl_lock held and block until the existing methods stop executing. So use rtnl_trylock and restart_syscall so that the code continues to work. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index fbc1c74..099c753 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -410,7 +410,8 @@ static ssize_t wireless_show(struct device *d, char *buf, const struct iw_statistics *iw; ssize_t ret = -EINVAL; - rtnl_lock(); + if (!rtnl_trylock()) + return restart_syscall(); if (dev_isalive(dev)) { iw = get_wireless_stats(dev); if (iw) -- cgit v0.10.2 From e0bf54c93a15c365a37cfc4fe0137f5bc012d1b9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 19 Feb 2010 13:29:27 +0000 Subject: sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll() efx_mcdi_poll() uses positive error numbers, matching the MCDI protocol. It must negate the result of efx_mcdi_poll_reboot() which returns the usual negative error numbers. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 9f035b9..f66b3da 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -127,7 +127,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) efx_dword_t reg; /* Check for a reboot atomically with respect to efx_mcdi_copyout() */ - rc = efx_mcdi_poll_reboot(efx); + rc = -efx_mcdi_poll_reboot(efx); if (rc) goto out; -- cgit v0.10.2 From 242cc0547f3bcecc0b02ca6f3e9512760185727e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 19 Feb 2010 13:34:03 +0000 Subject: sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerances The temperature and voltage limits currently set on these boards are too conservative and will cause the driver to stop the net device erroneously in some systems. Based on a review of the chip datasheets and advice from the designer of these boards: - Raise the maximum board temperatures to the specified maximum ambient temperatures for their PHYs plus the expected temperature bias of the board - Raise the maximum controller temperature to 90 degrees - Lower the minimum temperatures to 0 degrees - Widen the voltage tolerances to at least +/- 10% Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c index bf0b96a..5712fdd 100644 --- a/drivers/net/sfc/falcon_boards.c +++ b/drivers/net/sfc/falcon_boards.c @@ -29,6 +29,15 @@ #define FALCON_BOARD_SFN4111T 0x51 #define FALCON_BOARD_SFN4112F 0x52 +/* Board temperature is about 15°C above ambient when air flow is + * limited. */ +#define FALCON_BOARD_TEMP_BIAS 15 + +/* SFC4000 datasheet says: 'The maximum permitted junction temperature + * is 125°C; the thermal design of the environment for the SFC4000 + * should aim to keep this well below 100°C.' */ +#define FALCON_JUNC_TEMP_MAX 90 + /***************************************************************************** * Support for LM87 sensor chip used on several boards */ @@ -548,16 +557,16 @@ fail_hwmon: static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfe4002_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(3, 0xac, 0xd4), /* 5V: 5.0V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(0, 0x98, 0xbb), /* AIN1: 1.66V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; @@ -619,14 +628,14 @@ static int sfe4002_init(struct efx_nic *efx) static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfn4112f_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; -- cgit v0.10.2 From aeaa5ccd6421fbf9e7ded0ac67b12ea2b9fcf51e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Mon, 15 Feb 2010 18:07:39 -0500 Subject: vfs: don't call ima_file_check() unconditionally in nfsd_open() commit 1e41568d7378d1ba8c64ba137b9ddd00b59f893a ("Take ima_path_check() in nfsd past dentry_open() in nfsd_open()") moved this code back to its original location but missed the "else". Signed-off-by: Chuck Ebbert Signed-off-by: Al Viro diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 97d79ef..8715d19 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -752,7 +752,8 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); - host_err = ima_file_check(*filp, access); + else + host_err = ima_file_check(*filp, access); out_nfserr: err = nfserrno(host_err); out: -- cgit v0.10.2 From d9c4f846997c6d37e4f56907d93f1be022c17c6b Mon Sep 17 00:00:00 2001 From: Samu Onkalo Date: Fri, 19 Feb 2010 23:17:58 -0800 Subject: Input: polldev can cause crash in case when polling disabled When polled input device is opened and closed and there are no other users of polled device, the workqueue is created and destroyed in every open / close operation. It is probable that at some point dynamic allocation of internal parts of the workqueue cause changes to the workqueue. When a work is queued to the workqueue the work struct contains pointers to the workqueue data. If the workqueue has been changed and the work has never been queued to the new workqueue, work-struct contains pointers to the non-existing workqueue. This will cause crash at the work cancellation during device close since cancellation of a work assumes that the workqueue exists. To prevent that, work struct is cleaned up at device close. This keeps work struct clean for the next use. Signed-off-by: Samu Onkalo Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index aa6713b..291d939 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -100,6 +100,12 @@ static void input_close_polled_device(struct input_dev *input) struct input_polled_dev *dev = input_get_drvdata(input); cancel_delayed_work_sync(&dev->work); + /* + * Clean up work struct to remove references to the workqueue. + * It may be destroyed by the next call. This causes problems + * at next device open-close in case of poll_interval == 0. + */ + INIT_DELAYED_WORK(&dev->work, dev->work.work.func); input_polldev_stop_workqueue(); if (dev->close) -- cgit v0.10.2 From 1c8e170aaa7ba62c0160e96a52e25ad004419109 Mon Sep 17 00:00:00 2001 From: Abdoulaye Walsimou Gaye Date: Fri, 19 Feb 2010 12:47:14 +0100 Subject: ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor This patch fix the below build error for arm1026ej-s processor (IntegratorCP/arm1026ej-s board). CC init/main.o In file included from include/linux/highmem.h:8, from include/linux/pagemap.h:10, from include/linux/mempolicy.h:62, from init/main.c:52: arch/arm/include/asm/cacheflush.h:134:2: error: #error Unknown cache maintainence model make[1]: *** [init/main.o] Erreur 1 make: *** [init] Erreur 2 Signed-off-by: Abdoulaye Walsimou Gaye Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index c77d2fa..8113bb5 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -42,7 +42,8 @@ #endif #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ - defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) + defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \ + defined(CONFIG_CPU_ARM1026) # define MULTI_CACHE 1 #endif -- cgit v0.10.2 From 4e10ae11317b238609fc3ec9d50a5dee9473e045 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 20 Feb 2010 09:41:30 +0100 Subject: ARM: 5951/1: ARM: fix documentation of the PrimeCell bus This fixes the filepath encoded in and adds some documentation as to what this bus really means. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index ab94335..6816be6 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -1,5 +1,9 @@ /* - * linux/include/asm-arm/hardware/amba.h + * linux/include/amba/bus.h + * + * This device type deals with ARM PrimeCells and anything else that + * presents a proper CID (0xB105F00D) at the end of the I/O register + * region or that is derived from a PrimeCell. * * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. * -- cgit v0.10.2 From 0fa11802e0dcbd4e211a9310500bf52d701b9c1b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 20 Feb 2010 14:16:16 +0000 Subject: ARM: Update mach-types Signed-off-by: Russell King diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5a79fc6..31c2f4c 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Jan 28 22:15:54 2010 +# Last update: Sat Feb 20 14:16:15 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2257,7 +2257,7 @@ oratisalog MACH_ORATISALOG ORATISALOG 2268 oratismadi MACH_ORATISMADI ORATISMADI 2269 oratisot16 MACH_ORATISOT16 ORATISOT16 2270 oratisdesk MACH_ORATISDESK ORATISDESK 2271 -v2_ca9 MACH_V2P_CA9 V2P_CA9 2272 +vexpress MACH_VEXPRESS VEXPRESS 2272 sintexo MACH_SINTEXO SINTEXO 2273 cm3389 MACH_CM3389 CM3389 2274 omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275 @@ -2636,3 +2636,45 @@ hw90240 MACH_HW90240 HW90240 2648 dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 scat110 MACH_SCAT110 SCAT110 2651 +acer_a1 MACH_ACER_A1 ACER_A1 2652 +cmcontrol MACH_CMCONTROL CMCONTROL 2653 +pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654 +rfp43 MACH_RFP43 RFP43 2655 +sk86r0301 MACH_SK86R0301 SK86R0301 2656 +ctpxa MACH_CTPXA CTPXA 2657 +epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658 +guruplug MACH_GURUPLUG GURUPLUG 2659 +spear310 MACH_SPEAR310 SPEAR310 2660 +spear320 MACH_SPEAR320 SPEAR320 2661 +robotx MACH_ROBOTX ROBOTX 2662 +lsxhl MACH_LSXHL LSXHL 2663 +smartlite MACH_SMARTLITE SMARTLITE 2664 +cws2 MACH_CWS2 CWS2 2665 +m619 MACH_M619 M619 2666 +smartview MACH_SMARTVIEW SMARTVIEW 2667 +lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668 +kizbox MACH_KIZBOX KIZBOX 2669 +htccharmer MACH_HTCCHARMER HTCCHARMER 2670 +guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671 +pm9g45 MACH_PM9G45 PM9G45 2672 +htcpanther MACH_HTCPANTHER HTCPANTHER 2673 +htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674 +reb01 MACH_REB01 REB01 2675 +aquila MACH_AQUILA AQUILA 2676 +spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 +sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 +surf7x30 MACH_SURF7X30 SURF7X30 2679 +micro2440 MACH_MICRO2440 MICRO2440 2680 +am2440 MACH_AM2440 AM2440 2681 +tq2440 MACH_TQ2440 TQ2440 2682 +lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683 +ak880x MACH_AK880X AK880X 2684 +cobra3530 MACH_COBRA3530 COBRA3530 2685 +pmppb MACH_PMPPB PMPPB 2686 +u6715 MACH_U6715 U6715 2687 +axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688 +g30_dvb MACH_G30_DVB G30_DVB 2689 +vc088x MACH_VC088X VC088X 2690 +mioa702 MACH_MIOA702 MIOA702 2691 +hpmin MACH_HPMIN HPMIN 2692 +ak880xak MACH_AK880XAK AK880XAK 2693 -- cgit v0.10.2 From 8f9941aeccc318f243ab3fa55aaa17f4c1cb33f9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Feb 2010 18:14:21 +0000 Subject: CacheFiles: Fix a race in cachefiles_delete_object() vs rename cachefiles_delete_object() can race with rename. It gets the parent directory of the object it's asked to delete, then locks it - but rename may have changed the object's parent between the get and the completion of the lock. However, if such a circumstance is detected, we abandon our attempt to delete the object - since it's no longer in the index key path, it won't be seen again by lookups of that key. The assumption is that cachefilesd may have culled it by renaming it to the graveyard for later destruction. Signed-off-by: David Howells Signed-off-by: Al Viro diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 14ac480..eeb4986 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -348,7 +348,17 @@ int cachefiles_delete_object(struct cachefiles_cache *cache, dir = dget_parent(object->dentry); mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); - ret = cachefiles_bury_object(cache, dir, object->dentry); + + /* we need to check that our parent is _still_ our parent - it may have + * been renamed */ + if (dir == object->dentry->d_parent) { + ret = cachefiles_bury_object(cache, dir, object->dentry); + } else { + /* it got moved, presumably by cachefilesd culling it, so it's + * no longer in the key path and we can ignore it */ + mutex_unlock(&dir->d_inode->i_mutex); + ret = 0; + } dput(dir); _leave(" = %d", ret); -- cgit v0.10.2 From d944d549aa86e08cba080396513234cf048fee1f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 20 Feb 2010 16:13:29 +0000 Subject: ARM: allow alignment fault mode to be configured at kernel boot Some glibc versions intentionally create lots of alignment faults in their gconv code, which if not fixed up, results in segfaults during boot. This can prevent systems booting properly. There is no clear hard-configurable default for this; the desired default depends on the nature of the userspace which is going to be booted. So, provide a way for the alignment fault handler to be configured via the kernel command line. Signed-off-by: Russell King diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 826b6e1..e7848a0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -315,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. + alignment= [KNL,ARM] + Allow the default userspace alignment fault handler + behaviour to be specified. Bit 0 enables warnings, + bit 1 enables fixups, and bit 2 sends a segfault. + amd_iommu= [HW,X86-84] Pass parameters to the AMD IOMMU driver in the system. Possible values are: diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b270d62..62820ed 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -77,6 +78,8 @@ static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +core_param(alignment, ai_usermode, int, 0600); + #define UM_WARN (1 << 0) #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) -- cgit v0.10.2 From 87b8d1adefa1548b591cbf0d63965987e2cf893d Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 18 Feb 2010 16:13:40 -0800 Subject: mm: Make copy_from_user() in migrate.c statically predictable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit x86-32 has had a static test for copy_on_user() overflow for a while. This test currently fails in mm/migrate.c resulting in an allyesconfig/allmodconfig build failure on x86-32: In function ‘copy_from_user’, inlined from ‘do_pages_stat’ at /home/hpa/kernel/git/mm/migrate.c:1012: /home/hpa/kernel/git/arch/x86/include/asm/uaccess_32.h:212: error: call to ‘copy_from_user_overflow’ declared Make the logic more explicit and therefore easier for gcc to understand. v2: rewrite the loop entirely using a more normal structure for a chunked-data loop (Linus Torvalds) Reported-by: Len Brown Signed-off-by: H. Peter Anvin Reviewed-and-Tested-by: KOSAKI Motohiro Cc: Arjan van de Ven Cc: Andrew Morton Cc: Christoph Lameter Cc: Hugh Dickins Cc: Rik van Riel Signed-off-by: Linus Torvalds diff --git a/mm/migrate.c b/mm/migrate.c index 9a0db5b..880bd59 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1002,33 +1002,27 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages, #define DO_PAGES_STAT_CHUNK_NR 16 const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR]; int chunk_status[DO_PAGES_STAT_CHUNK_NR]; - unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR; - int err; - for (i = 0; i < nr_pages; i += chunk_nr) { - if (chunk_nr > nr_pages - i) - chunk_nr = nr_pages - i; + while (nr_pages) { + unsigned long chunk_nr; - err = copy_from_user(chunk_pages, &pages[i], - chunk_nr * sizeof(*chunk_pages)); - if (err) { - err = -EFAULT; - goto out; - } + chunk_nr = nr_pages; + if (chunk_nr > DO_PAGES_STAT_CHUNK_NR) + chunk_nr = DO_PAGES_STAT_CHUNK_NR; + + if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages))) + break; do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status); - err = copy_to_user(&status[i], chunk_status, - chunk_nr * sizeof(*chunk_status)); - if (err) { - err = -EFAULT; - goto out; - } - } - err = 0; + if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status))) + break; -out: - return err; + pages += chunk_nr; + status += chunk_nr; + nr_pages -= chunk_nr; + } + return nr_pages ? -EFAULT : 0; } /* -- cgit v0.10.2 From 3dae93ec3ee1fceec69f40ef9b97892ce62ba7a5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 15 Feb 2010 19:32:25 -0500 Subject: [WATCHDOG] bfin: fix max timeout calculation Relying on overflow/wrap around isn't exact because if you wrap far enough, you get back to "valid" values. Reported-by: Thorsten Pohlmann Signed-off-by: Mike Frysinger Signed-off-by: Wim Van Sebroeck Cc: stable diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index c7b3f9d..2159e66 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -1,9 +1,8 @@ /* * Blackfin On-Chip Watchdog Driver - * Supports BF53[123]/BF53[467]/BF54[2489]/BF561 * * Originally based on softdog.c - * Copyright 2006-2007 Analog Devices Inc. + * Copyright 2006-2010 Analog Devices Inc. * Copyright 2006-2007 Michele d'Amico * Copyright 1996 Alan Cox * @@ -137,13 +136,15 @@ static int bfin_wdt_running(void) */ static int bfin_wdt_set_timeout(unsigned long t) { - u32 cnt; + u32 cnt, max_t, sclk; unsigned long flags; - stampit(); + sclk = get_sclk(); + max_t = -1 / sclk; + cnt = t * sclk; + stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt); - cnt = t * get_sclk(); - if (cnt < get_sclk()) { + if (t > max_t) { printk(KERN_WARNING PFX "timeout value is too large\n"); return -EINVAL; } -- cgit v0.10.2 From 2531be413b3f2f64c0282073de89fe52bbcbbab5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 21 Feb 2010 18:03:16 -0800 Subject: sparc32: Fix struct stat uid/gid types. Commit 085219f79cad89291699bd2bfb21c9fdabafe65f ("sparc32: use proper types in struct stat") Accidently changed the struct stat uid/gid members to uid_t and gid_t, but those get set to __kernel_uid32_t and __kernel_gid32_t respectively. Those are of type 'int' but the structure is meant to have 'short'. So use uid16_t and gid16_t to correct this. Reported-by: Rob Landley Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h index 55db5ec..39327d6 100644 --- a/arch/sparc/include/asm/stat.h +++ b/arch/sparc/include/asm/stat.h @@ -53,8 +53,8 @@ struct stat { ino_t st_ino; mode_t st_mode; short st_nlink; - uid_t st_uid; - gid_t st_gid; + uid16_t st_uid; + gid16_t st_gid; unsigned short st_rdev; off_t st_size; time_t st_atime; -- cgit v0.10.2 From eb083ba260f21ad79e83e1ad05a0d27e93b58c83 Mon Sep 17 00:00:00 2001 From: Roy Yin Date: Sun, 21 Feb 2010 22:52:49 -0800 Subject: Input: usbtouchscreen - extend coordinate range for Generaltouch devices Generaltouch protocol allows for coordinates in [0, 0xffff] range and there are devices reporting coordinates as high as 0x7fff so let's update the driver to reflect that. Signed-off-by: Roy Yin Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 09a5e73..5256123 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -618,8 +618,8 @@ static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ; - dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ; + dev->x = (pkt[2] << 8) | pkt[1]; + dev->y = (pkt[4] << 8) | pkt[3]; dev->press = pkt[5] & 0xff; dev->touch = pkt[0] & 0x01; @@ -809,9 +809,9 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH [DEVTYPE_GENERAL_TOUCH] = { .min_xc = 0x0, - .max_xc = 0x0500, + .max_xc = 0x7fff, .min_yc = 0x0, - .max_yc = 0x0500, + .max_yc = 0x7fff, .rept_size = 7, .read_data = general_touch_read_data, }, -- cgit v0.10.2 From 388c3aab5d4f1b0bbfe2d5f47e7cd681866bc573 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 18 Feb 2010 13:16:52 -0500 Subject: perf probe: Init struct probe_point and set counter correctly Clear struct probe_point before using it in show_perf_probe_events(), and set pp->found counter correctly in synthesize_perf_probe_point(). Without this initialization, clear_probe_point() will free random addresses. Signed-off-by: Masami Hiramatsu Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: systemtap Cc: DLE LKML-Reference: <20100218181652.26547.57790.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 29465d4..fde17b0 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -272,6 +272,7 @@ int synthesize_perf_probe_point(struct probe_point *pp) int ret; pp->probes[0] = buf = zalloc(MAX_CMDLEN); + pp->found = 1; if (!buf) die("Failed to allocate memory by zalloc."); if (pp->offset) { @@ -294,6 +295,7 @@ int synthesize_perf_probe_point(struct probe_point *pp) error: free(pp->probes[0]); pp->probes[0] = NULL; + pp->found = 0; } return ret; } @@ -455,6 +457,7 @@ void show_perf_probe_events(void) struct strlist *rawlist; struct str_node *ent; + memset(&pp, 0, sizeof(pp)); fd = open_kprobe_events(O_RDONLY, 0); rawlist = get_trace_kprobe_event_rawlist(fd); close(fd); -- cgit v0.10.2 From a239a8b47cc0e5e6d7416a89f340beac06d5edaa Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 19 Feb 2010 15:47:32 -0800 Subject: iwlwifi: error checking for number of tfds in queue When receive reply_tx and ready to decrement the count for number of tfds in queue, do error checking to prevent error condition and tfds_in_queue become negative number. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9b4b8b5..3146281 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2008,7 +2008,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " "%d index %d\n", scd_ssn , index); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index de45f30..f27c514 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1125,7 +1125,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, scd_ssn , index, txq_id, txq->swq_id); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && @@ -1154,7 +1154,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, freed = iwl_tx_queue_reclaim(priv, txq_id, index); if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df..fe37d6a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -446,6 +446,8 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv); int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq); int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed); int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id); void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 87ce2bd..72136c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -120,6 +120,20 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) EXPORT_SYMBOL(iwl_txq_update_write_ptr); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed) +{ + if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + else { + IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n", + priv->stations[sta_id].tid[tid].tfds_in_queue, + freed); + priv->stations[sta_id].tid[tid].tfds_in_queue = 0; + } +} +EXPORT_SYMBOL(iwl_free_tfds_in_queue); + /** * iwl_tx_queue_free - Deallocate DMA queue. * @txq: Transmit queue to deallocate. @@ -1559,7 +1573,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { /* calculate mac80211 ampdu sw queue to wake */ int freed = iwl_tx_queue_reclaim(priv, scd_flow, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if ((iwl_queue_space(&txq->q) > txq->q.low_mark) && priv->mac80211_registered && -- cgit v0.10.2 From a120e912eb51e347f36c71b60a1d13af74d30e83 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 19 Feb 2010 15:47:33 -0800 Subject: iwlwifi: sanity check before counting number of tfds can be free Check the frame control for ieee80211_is_data_qos() is true before counting the number of tfds can be free, the tfds_in_queue only increment when ieee80211_is_data_qos() is true before transmit; so it should only decrement if the type match. Remove ieee80211_is_data_qos check for frame_ctrl in tx_resp to avoid invalid information pass from uCode. Signed-off-by: Stanislaw Gruszka Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f27c514..cffaae7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1153,16 +1153,14 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, tx_resp->failure_frame); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - iwl_free_tfds_in_queue(priv, sta_id, tid, freed); + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) iwl_wake_queue(priv, txq_id); } - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - iwl_txq_check_empty(priv, sta_id, tid, txq_id); + iwl_txq_check_empty(priv, sta_id, tid, txq_id); if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 72136c8..8f40715 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1145,6 +1145,7 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) struct iwl_queue *q = &txq->q; struct iwl_tx_info *tx_info; int nfreed = 0; + struct ieee80211_hdr *hdr; if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, " @@ -1159,13 +1160,16 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) tx_info = &txq->txb[txq->q.read_ptr]; iwl_tx_status(priv, tx_info->skb[0]); + + hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data; + if (hdr && ieee80211_is_data_qos(hdr->frame_control)) + nfreed++; tx_info->skb[0] = NULL; if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq); priv->cfg->ops->lib->txq_free_tfd(priv, txq); - nfreed++; } return nfreed; } -- cgit v0.10.2 From 61caf87cb5c2a198966018343a6ce4c5ab6cf8df Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 18 Feb 2010 23:06:27 +0100 Subject: i915 / PM: Fix hibernate regression caused by suspend/resume splitting Commit 84b79f8d2882b0a84330c04839ed4d3cefd2ff77 (drm/i915: Fix crash while aborting hibernation) attempted to fix a regression introduced by commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), but it went too far trying to split the freeze/suspend and resume/thaw parts of the code. As a result, it introduced another regression, which only is visible on some systems. Fix the problem by merging i915_drm_suspend() with i915_drm_freeze() and moving some code from i915_resume() into i915_drm_thaw(), so that intel_opregion_free() and intel_opregion_init() are also executed in the freeze and thaw code paths, respectively. Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Pedro Ribeiro Tested-by: Tino Keitel Acked-by: Eric Anholt Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 79beffc..cf4cb3e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -176,6 +176,8 @@ MODULE_DEVICE_TABLE(pci, pciidlist); static int i915_drm_freeze(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; + pci_save_state(dev->pdev); /* If KMS is active, we do the leavevt stuff here */ @@ -191,17 +193,12 @@ static int i915_drm_freeze(struct drm_device *dev) i915_save_state(dev); - return 0; -} - -static void i915_drm_suspend(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - intel_opregion_free(dev, 1); /* Modeset on resume, not lid events */ dev_priv->modeset_on_lid = 0; + + return 0; } static int i915_suspend(struct drm_device *dev, pm_message_t state) @@ -221,8 +218,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) if (error) return error; - i915_drm_suspend(dev); - if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ pci_disable_device(dev->pdev); @@ -237,6 +232,10 @@ static int i915_drm_thaw(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int error = 0; + i915_restore_state(dev); + + intel_opregion_init(dev, 1); + /* KMS EnterVT equivalent */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { mutex_lock(&dev->struct_mutex); @@ -263,10 +262,6 @@ static int i915_resume(struct drm_device *dev) pci_set_master(dev->pdev); - i915_restore_state(dev); - - intel_opregion_init(dev, 1); - return i915_drm_thaw(dev); } @@ -423,8 +418,6 @@ static int i915_pm_suspend(struct device *dev) if (error) return error; - i915_drm_suspend(drm_dev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -464,13 +457,8 @@ static int i915_pm_poweroff(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct drm_device *drm_dev = pci_get_drvdata(pdev); - int error; - - error = i915_drm_freeze(drm_dev); - if (!error) - i915_drm_suspend(drm_dev); - return error; + return i915_drm_freeze(drm_dev); } const struct dev_pm_ops i915_pm_ops = { -- cgit v0.10.2 From d306ebc28649b89877a22158fe0076f06cc46f60 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 10 Feb 2010 10:35:31 -0800 Subject: ACPI: Be in TS_POLLING state during mwait based C-state entry ACPI deep C-state entry had a long standing bug/missing feature, wherein we were sending resched IPIs when an idle CPU is in mwait based deep C-state. Only mwait based C1 was using the write to the monitored address to wake up mwait'ing CPU. This patch changes the code to retain TS_POLLING bit if we are entering an mwait based deep C-state. The patch has been verified to reduce the number of resched IPIs in general and also improves the performance/power on workloads with low system utilization (i.e., when mwait based deep C-states are being used). Fixes "netperf ~50% regression with 2.6.33-rc1, bisect to 1b9508f" http://marc.info/?l=linux-kernel&m=126441481427331&w=4 Reported-by: Lin Ming Tested-by: Alex Shi Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e88e8ae0..cc978a8 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -880,12 +880,14 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, return(acpi_idle_enter_c1(dev, state)); local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; @@ -965,12 +967,14 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, } local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; -- cgit v0.10.2 From 15cbf627abcd93c3c668d5a92d58d9fec8f953dd Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 22 Feb 2010 10:43:43 -0800 Subject: Revert "parisc: HAVE_ARCH_TRACEHOOK" This reverts commit 81bf550d9cdfe0325eb1504b06c9f6511b442c1a. HAVE_ARCH_TRACEHOOK requires defining the user_regset interfaces, including task_user_regset_view(). parisc doesn't do that yet, so don't lie about it. Signed-off-by: Roland McGrath diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 524d935..f388dc6 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -18,7 +18,6 @@ config PARISC select BUG select HAVE_PERF_EVENTS select GENERIC_ATOMIC64 if !64BIT - select HAVE_ARCH_TRACEHOOK help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, -- cgit v0.10.2 From 52ab320ac560af3333191a473e56615fb48fff95 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sat, 20 Feb 2010 21:23:22 +0900 Subject: MIPS: Highmem: Fix build error arch/mips/mm/highmem.c: In function 'kmap_init': arch/mips/mm/highmem.c:130: error: 'init_mm' undeclared (first use in this function) arch/mips/mm/highmem.c:130: error: (Each undeclared identifier is reported only once arch/mips/mm/highmem.c:130: error: for each function it appears in.) Signed-off-by: Yoichi Yuasa Cc: linux-mips Patchwork: http://patchwork.linux-mips.org/patch/980/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index e274fda..127d732 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -1,5 +1,6 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From 84a6fcb368a080620d12fc4d79e07902dbee7335 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 20 Feb 2010 19:51:20 +0100 Subject: MIPS: BCM47xx: Fix 128MB RAM support Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the DDR address space. Signed-off-by: Hauke Mehrtens Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/981/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index c51405e..29d3cbf 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -141,6 +141,14 @@ static __init void prom_init_mem(void) break; } + /* Ignoring the last page when ddr size is 128M. Cached + * accesses to last page is causing the processor to prefetch + * using address above 128M stepping out of the ddr address + * space. + */ + if (mem == 0x8000000) + mem -= 0x1000; + add_memory_region(0, mem, BOOT_MEM_RAM); } -- cgit v0.10.2 From e7e65caefd57913260c82fb751f07655671ec47e Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 10 Feb 2010 19:25:58 +0100 Subject: drm/nouveau: Fix up pre-nv17 analog load detection. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index d0e038d..1d73b15 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -119,7 +119,7 @@ static enum drm_connector_status nv04_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct drm_device *dev = encoder->dev; - uint8_t saved_seq1, saved_pi, saved_rpc1; + uint8_t saved_seq1, saved_pi, saved_rpc1, saved_cr_mode; uint8_t saved_palette0[3], saved_palette_mask; uint32_t saved_rtest_ctrl, saved_rgen_ctrl; int i; @@ -135,6 +135,9 @@ static enum drm_connector_status nv04_dac_detect(struct drm_encoder *encoder, /* only implemented for head A for now */ NVSetOwner(dev, 0); + saved_cr_mode = NVReadVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX); + NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode | 0x80); + saved_seq1 = NVReadVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX); NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1 & ~0x20); @@ -203,6 +206,7 @@ out: NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX, saved_pi); NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_RPC1_INDEX, saved_rpc1); NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1); + NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode); if (blue == 0x18) { NV_INFO(dev, "Load detected on head A\n"); -- cgit v0.10.2 From 66b6ebaccb176a2068bbe328f162614dce524621 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 11 Feb 2010 10:23:30 +1000 Subject: drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram GART is handled elsewhere, no reason to have the code for it here too. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 8f3a12f..04885d2 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -285,53 +285,36 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, uint32_t flags, uint64_t phys) { struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_gpuobj **pgt; - unsigned psz, pfl, pages; - - if (virt >= dev_priv->vm_gart_base && - (virt + size) < (dev_priv->vm_gart_base + dev_priv->vm_gart_size)) { - psz = 12; - pgt = &dev_priv->gart_info.sg_ctxdma; - pfl = 0x21; - virt -= dev_priv->vm_gart_base; - } else - if (virt >= dev_priv->vm_vram_base && - (virt + size) < (dev_priv->vm_vram_base + dev_priv->vm_vram_size)) { - psz = 16; - pgt = dev_priv->vm_vram_pt; - pfl = 0x01; - virt -= dev_priv->vm_vram_base; - } else { - NV_ERROR(dev, "Invalid address: 0x%16llx-0x%16llx\n", - virt, virt + size - 1); - return -EINVAL; - } + unsigned pages; - pages = size >> psz; + virt -= dev_priv->vm_vram_base; + pages = size >> 16; dev_priv->engine.instmem.prepare_access(dev, true); if (flags & 0x80000000) { while (pages--) { - struct nouveau_gpuobj *pt = pgt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1; + struct nouveau_gpuobj *pt = + dev_priv->vm_vram_pt[virt >> 29]; + unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; nv_wo32(dev, pt, pte++, 0x00000000); nv_wo32(dev, pt, pte++, 0x00000000); - virt += (1 << psz); + virt += (1 << 16); } } else { while (pages--) { - struct nouveau_gpuobj *pt = pgt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1; + struct nouveau_gpuobj *pt = + dev_priv->vm_vram_pt[virt >> 29]; + unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; unsigned offset_h = upper_32_bits(phys) & 0xff; unsigned offset_l = lower_32_bits(phys); - nv_wo32(dev, pt, pte++, offset_l | pfl); + nv_wo32(dev, pt, pte++, offset_l | 1); nv_wo32(dev, pt, pte++, offset_h | flags); - phys += (1 << psz); - virt += (1 << psz); + phys += (1 << 16); + virt += (1 << 16); } } dev_priv->engine.instmem.finish_access(dev); -- cgit v0.10.2 From 4c27bd339d226175ac0e4dc3ab8289ba696db8be Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 11 Feb 2010 10:25:53 +1000 Subject: drm/nv50: more efficient clearing of gpu page table entries Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 04885d2..6832c4c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -291,31 +291,17 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, pages = size >> 16; dev_priv->engine.instmem.prepare_access(dev, true); - if (flags & 0x80000000) { - while (pages--) { - struct nouveau_gpuobj *pt = - dev_priv->vm_vram_pt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; + while (pages--) { + struct nouveau_gpuobj *pt = dev_priv->vm_vram_pt[virt >> 29]; + unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; + unsigned offset_h = upper_32_bits(phys) & 0xff; + unsigned offset_l = lower_32_bits(phys); - nv_wo32(dev, pt, pte++, 0x00000000); - nv_wo32(dev, pt, pte++, 0x00000000); + nv_wo32(dev, pt, pte++, offset_l | 1); + nv_wo32(dev, pt, pte++, offset_h | flags); - virt += (1 << 16); - } - } else { - while (pages--) { - struct nouveau_gpuobj *pt = - dev_priv->vm_vram_pt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; - unsigned offset_h = upper_32_bits(phys) & 0xff; - unsigned offset_l = lower_32_bits(phys); - - nv_wo32(dev, pt, pte++, offset_l | 1); - nv_wo32(dev, pt, pte++, offset_h | flags); - - phys += (1 << 16); - virt += (1 << 16); - } + phys += (1 << 16); + virt += (1 << 16); } dev_priv->engine.instmem.finish_access(dev); @@ -339,7 +325,41 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, void nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size) { - nv50_mem_vm_bind_linear(dev, virt, size, 0x80000000, 0); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *pgt; + unsigned pages, pte, end; + + virt -= dev_priv->vm_vram_base; + pages = (size >> 16) << 1; + + dev_priv->engine.instmem.prepare_access(dev, true); + while (pages) { + pgt = dev_priv->vm_vram_pt[virt >> 29]; + pte = (virt & 0x1ffe0000ULL) >> 15; + + end = pte + pages; + if (end > 16384) + end = 16384; + pages -= (end - pte); + virt += (end - pte) << 15; + + while (pte < end) + nv_wo32(dev, pgt, pte++, 0); + } + dev_priv->engine.instmem.finish_access(dev); + + nv_wr32(dev, 0x100c80, 0x00050001); + if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) { + NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n"); + NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80)); + return; + } + + nv_wr32(dev, 0x100c80, 0x00000001); + if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) { + NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n"); + NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80)); + } } /* -- cgit v0.10.2 From 531e77139f26e8da32ee694b9ee5e6f4c764f1db Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 11 Feb 2010 11:31:44 +1000 Subject: drm/nv50: improve vram page table construction This commit changes nouveau to construct PTEs which look very much like the ones the binary driver creates. I presume that filling multiple PTEs identically with length flags and the physical address of the start of a block of VRAM is a hint to the memory controller that it need not perform additional page table lookups for that range of addresses. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 6832c4c..134fedb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -285,23 +285,45 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, uint32_t flags, uint64_t phys) { struct drm_nouveau_private *dev_priv = dev->dev_private; - unsigned pages; + struct nouveau_gpuobj *pgt; + unsigned block; + int i; - virt -= dev_priv->vm_vram_base; - pages = size >> 16; + virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1; + size = (size >> 16) << 1; + phys |= ((uint64_t)flags << 32) | 1; dev_priv->engine.instmem.prepare_access(dev, true); - while (pages--) { - struct nouveau_gpuobj *pt = dev_priv->vm_vram_pt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> 16) << 1; - unsigned offset_h = upper_32_bits(phys) & 0xff; + while (size) { + unsigned offset_h = upper_32_bits(phys); unsigned offset_l = lower_32_bits(phys); + unsigned pte, end; + + for (i = 7; i >= 0; i--) { + block = 1 << (i + 1); + if (size >= block && !(virt & (block - 1))) + break; + } + offset_l |= (i << 7); + + phys += block << 15; + size -= block; - nv_wo32(dev, pt, pte++, offset_l | 1); - nv_wo32(dev, pt, pte++, offset_h | flags); + while (block) { + pgt = dev_priv->vm_vram_pt[virt >> 14]; + pte = virt & 0x3ffe; - phys += (1 << 16); - virt += (1 << 16); + end = pte + block; + if (end > 16384) + end = 16384; + block -= (end - pte); + virt += (end - pte); + + while (pte < end) { + nv_wo32(dev, pgt, pte++, offset_l); + nv_wo32(dev, pgt, pte++, offset_h); + } + } } dev_priv->engine.instmem.finish_access(dev); -- cgit v0.10.2 From 76befb8c30cebe2af83fa346bdaf75b430893511 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sat, 20 Feb 2010 08:06:36 +1000 Subject: drm/nv50: fix instmem binding on IGPs to point at stolen system memory This also modifies the unused PRAMIN PT entries to be all zeroes, can't really recall why I used 9/0 initially, just that it didn't work for some reason. It was likely masking a bug elsewhere that's since been fixed. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 5445cef..1c15ef3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -583,6 +583,7 @@ struct drm_nouveau_private { uint64_t vm_end; struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR]; int vm_vram_pt_nr; + uint64_t vram_sys_base; /* the mtrr covering the FB */ int fb_mtrr; diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c index 94400f7..f0dc4e3 100644 --- a/drivers/gpu/drm/nouveau/nv50_instmem.c +++ b/drivers/gpu/drm/nouveau/nv50_instmem.c @@ -76,6 +76,11 @@ nv50_instmem_init(struct drm_device *dev) for (i = 0x1700; i <= 0x1710; i += 4) priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i); + if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac) + dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12; + else + dev_priv->vram_sys_base = 0; + /* Reserve the last MiB of VRAM, we should probably try to avoid * setting up the below tables over the top of the VBIOS image at * some point. @@ -172,16 +177,28 @@ nv50_instmem_init(struct drm_device *dev) * We map the entire fake channel into the start of the PRAMIN BAR */ ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pt_size, 0x1000, - 0, &priv->pramin_pt); + 0, &priv->pramin_pt); if (ret) return ret; - for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) { - if (v < (c_offset + c_size)) - BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1); - else - BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009); + v = c_offset | 1; + if (dev_priv->vram_sys_base) { + v += dev_priv->vram_sys_base; + v |= 0x30; + } + + i = 0; + while (v < dev_priv->vram_sys_base + c_offset + c_size) { + BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v); + BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000); + v += 0x1000; + i += 8; + } + + while (i < pt_size) { + BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000); BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000); + i += 8; } BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63); @@ -416,7 +433,9 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv; - uint32_t pte, pte_end, vram; + struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj; + uint32_t pte, pte_end; + uint64_t vram; if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound) return -EINVAL; @@ -424,20 +443,24 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n", gpuobj->im_pramin->start, gpuobj->im_pramin->size); - pte = (gpuobj->im_pramin->start >> 12) << 3; - pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte; + pte = (gpuobj->im_pramin->start >> 12) << 1; + pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte; vram = gpuobj->im_backing_start; NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n", gpuobj->im_pramin->start, pte, pte_end); NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start); + vram |= 1; + if (dev_priv->vram_sys_base) { + vram += dev_priv->vram_sys_base; + vram |= 0x30; + } + dev_priv->engine.instmem.prepare_access(dev, true); while (pte < pte_end) { - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1); - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000); - - pte += 8; + nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram)); + nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram)); vram += NV50_INSTMEM_PAGE_SIZE; } dev_priv->engine.instmem.finish_access(dev); @@ -470,14 +493,13 @@ nv50_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) if (gpuobj->im_bound == 0) return -EINVAL; - pte = (gpuobj->im_pramin->start >> 12) << 3; - pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte; + pte = (gpuobj->im_pramin->start >> 12) << 1; + pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte; dev_priv->engine.instmem.prepare_access(dev, true); while (pte < pte_end) { - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009); - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000); - pte += 8; + nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000); + nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000); } dev_priv->engine.instmem.finish_access(dev); -- cgit v0.10.2 From 6c42966768b0254f465a8f451333795283f53d22 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sat, 20 Feb 2010 08:10:11 +1000 Subject: drm/nv50: fix vram ptes on IGPs to point at stolen system memory Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 134fedb..2dc09db 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -291,7 +291,13 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1; size = (size >> 16) << 1; - phys |= ((uint64_t)flags << 32) | 1; + + phys |= ((uint64_t)flags << 32); + phys |= 1; + if (dev_priv->vram_sys_base) { + phys += dev_priv->vram_sys_base; + phys |= 0x30; + } dev_priv->engine.instmem.prepare_access(dev, true); while (size) { -- cgit v0.10.2 From 5a2d41961dd6815b874b5c0afec0ac96cd90eea4 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 22 Feb 2010 12:44:14 -0800 Subject: memcg: fix oom killing a child process in an other cgroup Presently the oom-killer is memcg aware and it finds the worst process from processes under memcg(s) in oom. Then, it kills victim's child first. It may kill a child in another cgroup and may not be any help for recovery. And it will break the assumption users have. This patch fixes it. Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Cc: Balbir Singh Reviewed-by: Daisuke Nishimura Acked-by: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/oom_kill.c b/mm/oom_kill.c index f52481b..2370504 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -459,6 +459,8 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, list_for_each_entry(c, &p->children, sibling) { if (c->mm == p->mm) continue; + if (mem && !task_in_mem_cgroup(c, mem)) + continue; if (!oom_kill_task(c)) return 0; } -- cgit v0.10.2 From 701188374b6f1ef9cf7e4dce4a2e69ef4c0012ac Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 22 Feb 2010 12:44:16 -0800 Subject: kernel/sys.c: fix missing rcu protection for sys_getpriority() find_task_by_vpid() is not safe without rcu_read_lock(). 2.6.33-rc7 got RCU protection for sys_setpriority() but missed it for sys_getpriority(). Signed-off-by: Tetsuo Handa Cc: Oleg Nesterov Cc: "Paul E. McKenney" Acked-by: Serge Hallyn Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sys.c b/kernel/sys.c index 26a6b73..18bde97 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -222,6 +222,7 @@ SYSCALL_DEFINE2(getpriority, int, which, int, who) if (which > PRIO_USER || which < PRIO_PROCESS) return -EINVAL; + rcu_read_lock(); read_lock(&tasklist_lock); switch (which) { case PRIO_PROCESS: @@ -267,6 +268,7 @@ SYSCALL_DEFINE2(getpriority, int, which, int, who) } out_unlock: read_unlock(&tasklist_lock); + rcu_read_unlock(); return retval; } -- cgit v0.10.2 From d2e7276b6b5e4bc2148891a056d5862c5314342d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 22 Feb 2010 12:44:19 -0800 Subject: idr: fix a critical misallocation bug, take#2 This is retry of reverted 859ddf09743a8cc680af33f7259ccd0fd36bfe9d ("idr: fix a critical misallocation bug") which contained two bugs. * pa[idp->layers] should be cleared even if it's not used by sub_alloc() because it's used by mark idr_mark_full(). * The original condition check also assigned pa[l] to p which the new code didn't do thus leaving p pointing at the wrong layer. Both problems have been fixed and the idr code has received good amount testing using userland testing setup where simple bitmap allocator is run parallel to verify the result of idr allocation. The bug this patch fixes is caused by sub_alloc() optimization path bypassing out-of-room condition check and restarting allocation loop with starting value higher than maximum allowed value. For detailed description, please read commit message of 859ddf09. Signed-off-by: Tejun Heo Based-on-patch-from: Eric Paris Reported-by: Eric Paris Tested-by: Stefan Lippers-Hollmann Tested-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/idr.c b/lib/idr.c index 1cac726..0dc7822 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -156,10 +156,12 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; /* if already at the top layer, we need to grow */ - if (!(p = pa[l])) { + if (id >= 1 << (idp->layers * IDR_BITS)) { *starting_id = id; return IDR_NEED_TO_GROW; } + p = pa[l]; + BUG_ON(!p); /* If we need to go up one layer, continue the * loop; otherwise, restart from the top. -- cgit v0.10.2 From 115079aad949cba31755eb4e2576edba7fddfdbc Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Mon, 22 Feb 2010 12:44:20 -0800 Subject: geode-mfgpt: restore previous behavior for selecting IRQ geode-mfgpt: restore previous behavior for selecting IRQ The MFGPT IRQ used to be, in order of decreasing priority, * IRQ supplied by the user as a boot-time parameter, * IRQ previously set by the BIOS or another driver, * default IRQ given at compile time. Return to this behavior, which got broken when splitting the MFGPT/clocksource driver for 2.6.33-rc1. Signed-off-by: Jens Rottmann Acked-by: Andres Salomon Cc: Jordan Crouse Cc: Ingo Molnar Cc: john stultz Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 27d20fa..b314a99 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -21,7 +21,7 @@ #define DRV_NAME "cs5535-clockevt" -static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ; +static int timer_irq; module_param_named(irq, timer_irq, int, 0644); MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks."); -- cgit v0.10.2 From 89f3f2199084a160a3a45fa6d9af235696321758 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 22 Feb 2010 12:44:22 -0800 Subject: efifb: fix framebuffer handoff Commit 4410f3910947dcea8672280b3adecd53cec4e85e ("fbdev: add support for handoff from firmware to hw framebuffers") didn't add fb_destroy operation to efifb. Fix it and change aperture_size to match size passed to request_mem_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15151 Signed-off-by: Marcin Slusarz Reported-by: Alex Zhavnerchik Tested-by: Alex Zhavnerchik Acked-by: Peter Jones Cc: Huang Ying Cc: Dave Airlie Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index eb12182..d25df51 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -161,8 +161,17 @@ static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green, return 0; } +static void efifb_destroy(struct fb_info *info) +{ + if (info->screen_base) + iounmap(info->screen_base); + release_mem_region(info->aperture_base, info->aperture_size); + framebuffer_release(info); +} + static struct fb_ops efifb_ops = { .owner = THIS_MODULE, + .fb_destroy = efifb_destroy, .fb_setcolreg = efifb_setcolreg, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, @@ -281,7 +290,7 @@ static int __init efifb_probe(struct platform_device *dev) info->par = NULL; info->aperture_base = efifb_fix.smem_start; - info->aperture_size = size_total; + info->aperture_size = size_remap; info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len); if (!info->screen_base) { -- cgit v0.10.2 From a17e18790a8c47113a73139d54a375dc9ccd8f08 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 22 Feb 2010 12:44:24 -0800 Subject: fs/exec.c: fix initial stack reservation 803bf5ec259941936262d10ecc84511b76a20921 ("fs/exec.c: restrict initial stack space expansion to rlimit") attempts to limit the initial stack to 20*PAGE_SIZE. Unfortunately, in attempting ensure the stack is not reduced in size, we ended up not changing the stack at all. This size reduction check is not necessary as the expand_stack call does this already. This caused a regression in UML resulting in most guest processes being killed. Signed-off-by: Michael Neuling Reviewed-by: KOSAKI Motohiro Acked-by: WANG Cong Cc: Anton Blanchard Cc: Oleg Nesterov Cc: James Morris Cc: Serge Hallyn Cc: Benjamin Herrenschmidt Cc: Jouni Malinen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index e95c692..cce6bbd 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -637,7 +637,6 @@ int setup_arg_pages(struct linux_binprm *bprm, * will align it up. */ rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; - rlim_stack = min(rlim_stack, stack_size); #ifdef CONFIG_STACK_GROWSUP if (stack_size + stack_expand > rlim_stack) stack_base = vma->vm_start + rlim_stack; -- cgit v0.10.2 From 4e4ddd47774313accc86b233d6ca2c6a9037a671 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Sun, 21 Feb 2010 14:54:55 +0000 Subject: drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring. Intercept query commands and apply relocations to their guest pointers. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index d69caf9..0897359 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -182,25 +182,19 @@ static int vmw_cmd_present_check(struct vmw_private *dev_priv, return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid); } -static int vmw_cmd_dma(struct vmw_private *dev_priv, - struct vmw_sw_context *sw_context, - SVGA3dCmdHeader *header) +static int vmw_translate_guest_ptr(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGAGuestPtr *ptr, + struct vmw_dma_buffer **vmw_bo_p) { - uint32_t handle; struct vmw_dma_buffer *vmw_bo = NULL; struct ttm_buffer_object *bo; - struct vmw_surface *srf = NULL; - struct vmw_dma_cmd { - SVGA3dCmdHeader header; - SVGA3dCmdSurfaceDMA dma; - } *cmd; + uint32_t handle = ptr->gmrId; struct vmw_relocation *reloc; - int ret; uint32_t cur_validate_node; struct ttm_validate_buffer *val_buf; + int ret; - cmd = container_of(header, struct vmw_dma_cmd, header); - handle = cmd->dma.guest.ptr.gmrId; ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo); if (unlikely(ret != 0)) { DRM_ERROR("Could not find or use GMR region.\n"); @@ -209,14 +203,14 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, bo = &vmw_bo->base; if (unlikely(sw_context->cur_reloc >= VMWGFX_MAX_RELOCATIONS)) { - DRM_ERROR("Max number of DMA commands per submission" + DRM_ERROR("Max number relocations per submission" " exceeded\n"); ret = -EINVAL; goto out_no_reloc; } reloc = &sw_context->relocs[sw_context->cur_reloc++]; - reloc->location = &cmd->dma.guest.ptr; + reloc->location = ptr; cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf); if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) { @@ -234,7 +228,89 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, list_add_tail(&val_buf->head, &sw_context->validate_nodes); ++sw_context->cur_val_buf; } + *vmw_bo_p = vmw_bo; + return 0; + +out_no_reloc: + vmw_dmabuf_unreference(&vmw_bo); + vmw_bo_p = NULL; + return ret; +} + +static int vmw_cmd_end_query(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo; + struct vmw_query_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdEndQuery q; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_query_cmd, header); + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->q.guestResult, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + vmw_dmabuf_unreference(&vmw_bo); + return 0; +} +static int vmw_cmd_wait_query(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo; + struct vmw_query_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdWaitForQuery q; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_query_cmd, header); + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->q.guestResult, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + vmw_dmabuf_unreference(&vmw_bo); + return 0; +} + + +static int vmw_cmd_dma(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo = NULL; + struct ttm_buffer_object *bo; + struct vmw_surface *srf = NULL; + struct vmw_dma_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdSurfaceDMA dma; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_dma_cmd, header); + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->dma.guest.ptr, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + bo = &vmw_bo->base; ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile, cmd->dma.host.sid, &srf); if (ret) { @@ -379,8 +455,8 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw), VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_end_query), + VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_wait_query), VMW_CMD_DEF(SVGA_3D_CMD_PRESENT_READBACK, &vmw_cmd_ok), VMW_CMD_DEF(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN, &vmw_cmd_blt_surf_screen_check) -- cgit v0.10.2 From 79da0644a8e0838522828f106e4049639eea6baf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 23 Feb 2010 08:40:43 +0100 Subject: Revert "block: improve queue_should_plug() by looking at IO depths" This reverts commit fb1e75389bd06fd5987e9cda1b4e0305c782f854. "Benjamin S." reports that the patch in question causes a big drop in sequential throughput for him, dropping from 200MB/sec down to only 70MB/sec. Needs to be investigated more fully, for now lets just revert the offending commit. Conflicts: include/linux/blkdev.h Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 718897e6..d1a9a0a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1147,7 +1147,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) */ static inline bool queue_should_plug(struct request_queue *q) { - return !(blk_queue_nonrot(q) && blk_queue_queuing(q)); + return !(blk_queue_nonrot(q) && blk_queue_tagged(q)); } static int __make_request(struct request_queue *q, struct bio *bio) @@ -1859,15 +1859,8 @@ void blk_dequeue_request(struct request *rq) * and to it is freed is accounted as io that is in progress at * the driver side. */ - if (blk_account_rq(rq)) { + if (blk_account_rq(rq)) q->in_flight[rq_is_sync(rq)]++; - /* - * Mark this device as supporting hardware queuing, if - * we have more IOs in flight than 4. - */ - if (!blk_queue_queuing(q) && queue_in_flight(q) > 4) - set_bit(QUEUE_FLAG_CQ, &q->queue_flags); - } } /** diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5c80189..1896e86 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -461,8 +461,7 @@ struct request_queue #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ -#define QUEUE_FLAG_CQ 16 /* hardware does queuing */ -#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */ +#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ @@ -586,7 +585,6 @@ enum { #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) -#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) -- cgit v0.10.2 From b5abb028e214cca68f4231d4f3bc0847ddbc986e Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 19 Feb 2010 17:54:53 +0000 Subject: e1000: Fix DMA mapping error handling on RX Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d29bb53..7655436 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4006,11 +4006,21 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = pci_map_page(pdev, buffer_info->page, 0, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + put_page(buffer_info->page); + dev_kfree_skb(skb); + buffer_info->page = NULL; + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } + } rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -4101,6 +4111,13 @@ map_skb: skb->data, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + dev_kfree_skb(skb); + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } /* * XXX if it was allocated cleanly it will never map to a -- cgit v0.10.2 From f5ca8502f70ccc77008b7bee671f5301995240a4 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 22 Feb 2010 22:34:54 +0000 Subject: MAINTAINERS: update mv643xx_eth maintenance status I am no longer with Marvell. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 412eff6..318d2e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3490,9 +3490,9 @@ S: Maintained F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -M: Lennert Buytenhek +M: Lennert Buytenhek L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/mv643xx_eth.* F: include/linux/mv643xx.h -- cgit v0.10.2 From e79dc48431e7731f5bb6bab8f6b499fe03802ca0 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Mon, 22 Feb 2010 12:27:21 +0000 Subject: IPv6: better document max_addresses parameter Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: Brian Haley Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 006b39d..e87f3cdc 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1074,10 +1074,10 @@ regen_max_retry - INTEGER Default: 5 max_addresses - INTEGER - Number of maximum addresses per interface. 0 disables limitation. - It is recommended not set too large value (or 0) because it would - be too easy way to crash kernel to allow to create too much of - autoconfigured addresses. + Maximum number of autoconfigured addresses per interface. Setting + to zero disables the limitation. It is not recommended to set this + value too large (or to zero) because it would be an easy way to + crash the kernel by allowing too many addresses to be created. Default: 16 disable_ipv6 - BOOLEAN -- cgit v0.10.2 From cac43a1b7b091b17113502e4128dcb0ff7e3503d Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Fri, 19 Feb 2010 01:59:15 +0000 Subject: cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit) This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4f27f02..5f3b9ea 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -584,6 +584,11 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { + /* Ericsson C3607w ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), -- cgit v0.10.2 From 662a96bd6f020782dfbdc0d0bd177c7dbb556687 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 19 Feb 2010 05:13:58 +0000 Subject: tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch Signed-off-by: Atsushi Nemoto Signed-off-by: David S. Miller diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 75a669d..d71c197 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1437,7 +1437,6 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit) /* Transmit complete. */ lp->lstats.tx_ints++; tc35815_txdone(dev); - netif_wake_queue(dev); if (ret < 0) ret = 0; } -- cgit v0.10.2 From f7624c97b8e5bca49be7854309550bff8ce98c47 Mon Sep 17 00:00:00 2001 From: Hedi Berriche Date: Tue, 23 Feb 2010 23:58:49 +0000 Subject: [IA64] Fix broken sn2 build Revert the change made to arch/ia64/sn/kernel/setup.c by commit 204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 as it breaks the build. Fixing the build the b94b08081fcecf83fa690d6c5664f6316fe72208 way breaks xpc because genksyms then fails to generate an CRC for per_cpu____sn_cnodeid_to_nasid because of limitations in the generic genksyms code. Signed-off-by: Hedi Berriche Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index ece1bf9..e456f06 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second); DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); EXPORT_PER_CPU_SYMBOL(__sn_hub_info); -DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); +DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); -- cgit v0.10.2 From c4d49794ff2838038fd9756eae39c39a5a685833 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 16 Feb 2010 20:25:43 +0000 Subject: net: bug fix for vlan + gro issue Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu CC: Patrick McHardy Signed-off-by: Ajit Khaparde Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index be9924f..ec87421 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2761,7 +2761,7 @@ gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, switch (ret) { case GRO_NORMAL: case GRO_HELD: - skb->protocol = eth_type_trans(skb, napi->dev); + skb->protocol = eth_type_trans(skb, skb->dev); if (ret == GRO_HELD) skb_gro_pull(skb, -ETH_HLEN); -- cgit v0.10.2 From 0d670b24729be268eba98b3920b8571f60798d8d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 15 Feb 2010 10:50:42 +0100 Subject: microblaze: Fix cache loop function for cache range I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index d9d6383..2a56bcc 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -172,16 +172,15 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int step = -line_length; \ - int count = end - start; \ - BUG_ON(count <= 0); \ + int volatile temp; \ + BUG_ON(end - start <= 0); \ \ - __asm__ __volatile__ (" 1: addk %0, %0, %1; \ - " #op " %0, r0; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ - "r" (step) : "memory"); \ + __asm__ __volatile__ (" 1: " #op " %1, r0; \ + cmpu %0, %1, %2; \ + bgtid %0, 1b; \ + addk %1, %1, %3; \ + " : : "r" (temp), "r" (start), "r" (end),\ + "r" (line_length) : "memory"); \ } while (0); static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end) @@ -313,16 +312,6 @@ static void __invalidate_dcache_all_wb(void) pr_debug("%s\n", __func__); CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc.clear) - -#if 0 - unsigned int i; - - pr_debug("%s\n", __func__); - - /* Just loop through cache size and invalidate it */ - for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) - __invalidate_dcache(0, i); -#endif } static void __invalidate_dcache_range_wb(unsigned long start, -- cgit v0.10.2 From 83b4d17d8841a9a7b8ed02ac99ca92afada154e1 Mon Sep 17 00:00:00 2001 From: "Steven J. Magnani" Date: Mon, 22 Feb 2010 09:25:42 -0600 Subject: microblaze: Fix out_le32() macro Trailing semicolon causes compilation involving out_le32() to fail. Signed-off-by: Steven J. Magnani Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index fc9997b..267c7c7 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -217,7 +217,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, * Little endian */ -#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)); +#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)) #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a)) #define in_le32(a) __le32_to_cpu(__raw_readl(a)) -- cgit v0.10.2 From 5fd4514bb351b5ecb0da3692fff70741e5ed200c Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Mon, 22 Feb 2010 23:25:59 +0000 Subject: parisc: Set PCI CLS early in boot. Set the PCI CLS early in the boot process to prevent device failures. In pcibios_set_master use the new pci_cache_line_size instead of a hard-coded value. Signed-off-by: Carlos O'Donell Reviewed-by: Grant Grundler Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index f7064ab..9e74bfe 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -18,7 +18,6 @@ #include #include -#include /* for L1_CACHE_BYTES */ #include #define DEBUG_RESOURCES 0 @@ -123,6 +122,10 @@ static int __init pcibios_init(void) } else { printk(KERN_WARNING "pci_bios != NULL but init() is!\n"); } + + /* Set the CLS for PCI as early as possible. */ + pci_cache_line_size = pci_dfl_cache_line_size; + return 0; } @@ -171,7 +174,7 @@ void pcibios_set_master(struct pci_dev *dev) ** upper byte is PCI_LATENCY_TIMER. */ pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, - (0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32))); + (0x80 << 8) | pci_cache_line_size); } -- cgit v0.10.2 From 60b341b778cc2929df16c0a504c91621b3c6a4ad Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 24 Feb 2010 10:52:17 -0800 Subject: Linux 2.6.33 diff --git a/Makefile b/Makefile index 12b1aa1..1b24895 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v0.10.2