From 27b0b9d8515f1315ba3ec848aa58cf936200fe07 Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Tue, 3 Mar 2015 00:41:45 -0300 Subject: ARM: dts: warp: Add initial WaRP Board support The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4a4ae42..8e7b9d5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -299,7 +299,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ - imx6sl-evk.dtb + imx6sl-evk.dtb \ + imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts new file mode 100644 index 0000000..904efc4 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -0,0 +1,190 @@ +/* + * Copyright 2014, 2015 O.S. Systems Software LTDA. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sl.dtsi" + +/ { + model = "WaRP Board"; + compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + + reg_1p8v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + status = "okay"; +}; + +&iomuxc { + imx6sl-warp { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 + MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + >; + }; + }; +}; -- cgit v0.10.2