From 5e2f75b8993a0d83d469388b50716dd5551f2eb4 Mon Sep 17 00:00:00 2001 From: Dan Halperin Date: Thu, 18 Feb 2010 22:01:39 -0800 Subject: iwlwifi: set HT flags after channel in rxon The HT extension channel settings require priv->staging_rxon.channel to be accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel and thus HT40 could be broken unless another call to iwl_mac_config came in. This problem was recently introduced by "iwlwifi: Fix to set correct ht configuration" The particular setting in which I noticed this was monitor mode: iwconfig wlan0 mode monitor ifconfig wlan0 up ./iw wlan0 set channel 64 HT40- #./iw wlan0 set channel 64 HT40- tcpdump -i wlan0 -y IEEE802_11_RADIO would only catch HT40 packets if I issued the IW command twice. From visual inspection, iwl_set_rxon_channel does not depend on iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem. Signed-off-by: Daniel Halperin Acked-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index d10bea6..f36f804 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2744,8 +2744,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) priv->staging_rxon.flags = 0; - iwl_set_rxon_ht(priv, ht_conf); iwl_set_rxon_channel(priv, conf->channel); + iwl_set_rxon_ht(priv, ht_conf); iwl_set_flags_for_band(priv, conf->channel->band); spin_unlock_irqrestore(&priv->lock, flags); -- cgit v0.10.2 From a239a8b47cc0e5e6d7416a89f340beac06d5edaa Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 19 Feb 2010 15:47:32 -0800 Subject: iwlwifi: error checking for number of tfds in queue When receive reply_tx and ready to decrement the count for number of tfds in queue, do error checking to prevent error condition and tfds_in_queue become negative number. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9b4b8b5..3146281 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2008,7 +2008,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " "%d index %d\n", scd_ssn , index); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index de45f30..f27c514 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1125,7 +1125,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, scd_ssn , index, txq_id, txq->swq_id); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && @@ -1154,7 +1154,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, freed = iwl_tx_queue_reclaim(priv, txq_id, index); if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df..fe37d6a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -446,6 +446,8 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv); int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq); int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed); int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id); void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 87ce2bd..72136c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -120,6 +120,20 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) EXPORT_SYMBOL(iwl_txq_update_write_ptr); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed) +{ + if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + else { + IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n", + priv->stations[sta_id].tid[tid].tfds_in_queue, + freed); + priv->stations[sta_id].tid[tid].tfds_in_queue = 0; + } +} +EXPORT_SYMBOL(iwl_free_tfds_in_queue); + /** * iwl_tx_queue_free - Deallocate DMA queue. * @txq: Transmit queue to deallocate. @@ -1559,7 +1573,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { /* calculate mac80211 ampdu sw queue to wake */ int freed = iwl_tx_queue_reclaim(priv, scd_flow, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if ((iwl_queue_space(&txq->q) > txq->q.low_mark) && priv->mac80211_registered && -- cgit v0.10.2 From a120e912eb51e347f36c71b60a1d13af74d30e83 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 19 Feb 2010 15:47:33 -0800 Subject: iwlwifi: sanity check before counting number of tfds can be free Check the frame control for ieee80211_is_data_qos() is true before counting the number of tfds can be free, the tfds_in_queue only increment when ieee80211_is_data_qos() is true before transmit; so it should only decrement if the type match. Remove ieee80211_is_data_qos check for frame_ctrl in tx_resp to avoid invalid information pass from uCode. Signed-off-by: Stanislaw Gruszka Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f27c514..cffaae7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1153,16 +1153,14 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, tx_resp->failure_frame); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - iwl_free_tfds_in_queue(priv, sta_id, tid, freed); + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) iwl_wake_queue(priv, txq_id); } - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - iwl_txq_check_empty(priv, sta_id, tid, txq_id); + iwl_txq_check_empty(priv, sta_id, tid, txq_id); if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 72136c8..8f40715 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1145,6 +1145,7 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) struct iwl_queue *q = &txq->q; struct iwl_tx_info *tx_info; int nfreed = 0; + struct ieee80211_hdr *hdr; if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, " @@ -1159,13 +1160,16 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) tx_info = &txq->txb[txq->q.read_ptr]; iwl_tx_status(priv, tx_info->skb[0]); + + hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data; + if (hdr && ieee80211_is_data_qos(hdr->frame_control)) + nfreed++; tx_info->skb[0] = NULL; if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq); priv->cfg->ops->lib->txq_free_tfd(priv, txq); - nfreed++; } return nfreed; } -- cgit v0.10.2 From b5abb028e214cca68f4231d4f3bc0847ddbc986e Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 19 Feb 2010 17:54:53 +0000 Subject: e1000: Fix DMA mapping error handling on RX Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d29bb53..7655436 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4006,11 +4006,21 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = pci_map_page(pdev, buffer_info->page, 0, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + put_page(buffer_info->page); + dev_kfree_skb(skb); + buffer_info->page = NULL; + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } + } rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -4101,6 +4111,13 @@ map_skb: skb->data, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + dev_kfree_skb(skb); + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } /* * XXX if it was allocated cleanly it will never map to a -- cgit v0.10.2 From f5ca8502f70ccc77008b7bee671f5301995240a4 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 22 Feb 2010 22:34:54 +0000 Subject: MAINTAINERS: update mv643xx_eth maintenance status I am no longer with Marvell. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 412eff6..318d2e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3490,9 +3490,9 @@ S: Maintained F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -M: Lennert Buytenhek +M: Lennert Buytenhek L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/mv643xx_eth.* F: include/linux/mv643xx.h -- cgit v0.10.2 From e79dc48431e7731f5bb6bab8f6b499fe03802ca0 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Mon, 22 Feb 2010 12:27:21 +0000 Subject: IPv6: better document max_addresses parameter Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: Brian Haley Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 006b39d..e87f3cdc 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1074,10 +1074,10 @@ regen_max_retry - INTEGER Default: 5 max_addresses - INTEGER - Number of maximum addresses per interface. 0 disables limitation. - It is recommended not set too large value (or 0) because it would - be too easy way to crash kernel to allow to create too much of - autoconfigured addresses. + Maximum number of autoconfigured addresses per interface. Setting + to zero disables the limitation. It is not recommended to set this + value too large (or to zero) because it would be an easy way to + crash the kernel by allowing too many addresses to be created. Default: 16 disable_ipv6 - BOOLEAN -- cgit v0.10.2 From cac43a1b7b091b17113502e4128dcb0ff7e3503d Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Fri, 19 Feb 2010 01:59:15 +0000 Subject: cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit) This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4f27f02..5f3b9ea 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -584,6 +584,11 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { + /* Ericsson C3607w ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), -- cgit v0.10.2 From 662a96bd6f020782dfbdc0d0bd177c7dbb556687 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 19 Feb 2010 05:13:58 +0000 Subject: tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch Signed-off-by: Atsushi Nemoto Signed-off-by: David S. Miller diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 75a669d..d71c197 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1437,7 +1437,6 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit) /* Transmit complete. */ lp->lstats.tx_ints++; tc35815_txdone(dev); - netif_wake_queue(dev); if (ret < 0) ret = 0; } -- cgit v0.10.2 From c4d49794ff2838038fd9756eae39c39a5a685833 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 16 Feb 2010 20:25:43 +0000 Subject: net: bug fix for vlan + gro issue Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu CC: Patrick McHardy Signed-off-by: Ajit Khaparde Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index be9924f..ec87421 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2761,7 +2761,7 @@ gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, switch (ret) { case GRO_NORMAL: case GRO_HELD: - skb->protocol = eth_type_trans(skb, napi->dev); + skb->protocol = eth_type_trans(skb, skb->dev); if (ret == GRO_HELD) skb_gro_pull(skb, -ETH_HLEN); -- cgit v0.10.2