From 714848026531043ae06ca7bcd4a852c8bb8348c7 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Fri, 13 May 2016 16:41:41 +0200 Subject: KVM: arm/arm64: Add VGICv3 save/restore API documentation Factor out the GICv3 and ITS-specific documentation into a separate documentation file. Add description for how to access distributor, redistributor, and CPU interface registers for GICv3 in this new file, and add a group for accessing level triggered IRQ information for GICv3 as well. Reviewed-by: Marc Zyngier Reviewed-by: Peter Maydell Signed-off-by: Christoffer Dall diff --git a/Documentation/virtual/kvm/devices/arm-vgic-its.txt b/Documentation/virtual/kvm/devices/arm-vgic-its.txt new file mode 100644 index 0000000..6081a5b --- /dev/null +++ b/Documentation/virtual/kvm/devices/arm-vgic-its.txt @@ -0,0 +1,38 @@ +ARM Virtual Interrupt Translation Service (ITS) +=============================================== + +Device types supported: + KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller + +The ITS allows MSI(-X) interrupts to be injected into guests. This extension is +optional. Creating a virtual ITS controller also requires a host GICv3 (see +arm-vgic-v3.txt), but does not depend on having physical ITS controllers. + +There can be multiple ITS controllers per guest, each of them has to have +a separate, non-overlapping MMIO region. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + KVM_VGIC_ITS_ADDR_TYPE (rw, 64-bit) + Base address in the guest physical address space of the GICv3 ITS + control register frame. + This address needs to be 64K aligned and the region covers 128K. + Errors: + -E2BIG: Address outside of addressable IPA range + -EINVAL: Incorrectly aligned address + -EEXIST: Address already configured + -EFAULT: Invalid user pointer for attr->addr. + -ENODEV: Incorrect attribute or the ITS is not supported. + + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the ITS, no additional parameter in + kvm_device_attr.addr. + Errors: + -ENXIO: ITS not properly configured as required prior to setting + this attribute + -ENOMEM: Memory shortage when allocating ITS internal data diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt new file mode 100644 index 0000000..9348b3c --- /dev/null +++ b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt @@ -0,0 +1,206 @@ +ARM Virtual Generic Interrupt Controller v3 and later (VGICv3) +============================================================== + + +Device types supported: + KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0 + +Only one VGIC instance may be instantiated through this API. The created VGIC +will act as the VM interrupt controller, requiring emulated user-space devices +to inject interrupts to the VGIC instead of directly to CPUs. It is not +possible to create both a GICv3 and GICv2 on the same VM. + +Creating a guest GICv3 device requires a host GICv3 as well. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned and the region covers 64 KByte. + + KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 + redistributor register mappings. There are two 64K pages for each + VCPU and all of the redistributor pages are contiguous. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned. + Errors: + -E2BIG: Address outside of addressable IPA range + -EINVAL: Incorrectly aligned address + -EEXIST: Address already configured + -ENXIO: The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT: Invalid user pointer for attr->addr. + + + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS + KVM_DEV_ARM_VGIC_GRP_REDIST_REGS + Attributes: + The attr field of kvm_device_attr encodes two values: + bits: | 63 .... 32 | 31 .... 0 | + values: | mpidr | offset | + + All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a + __u32 value. 64-bit registers must be accessed by separately accessing the + lower and higher word. + + Writes to read-only registers are ignored by the kernel. + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers. + KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU + specified by the mpidr. + + The offset is relative to the "[Re]Distributor base address" as defined + in the GICv3/4 specs. Getting or setting such a register has the same + effect as reading or writing the register on real hardware, except for the + following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR, + GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave + differently when accessed via this interface compared to their + architecturally defined behavior to allow software a full view of the + VGIC's internal state. + + The mpidr field is used to specify which + redistributor is accessed. The mpidr is ignored for the distributor. + + The mpidr encoding is based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows: + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Note that distributor fields are not banked, but return the same value + regardless of the mpidr used to access the register. + + The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such + that a write of a clear bit has no effect, whereas a write with a set bit + clears that value. To allow userspace to freely set the values of these two + registers, setting the attributes with the register offsets for these two + registers simply sets the non-reserved bits to the value written. + + + Accesses (reads and writes) to the GICD_ISPENDR register region and + GICR_ISPENDR0 registers get/set the value of the latched pending state for + the interrupts. + + This is identical to the value returned by a guest read from ISPENDR for an + edge triggered interrupt, but may differ for level triggered interrupts. + For edge triggered interrupts, once an interrupt becomes pending (whether + because of an edge detected on the input line or because of a guest write + to ISPENDR) this state is "latched", and only cleared when either the + interrupt is activated or when the guest writes to ICPENDR. A level + triggered interrupt may be pending either because the level input is held + high by a device, or because of a guest write to the ISPENDR register. Only + ISPENDR writes are latched; if the device lowers the line level then the + interrupt is no longer pending unless the guest also wrote to ISPENDR, and + conversely writes to ICPENDR or activations of the interrupt do not clear + the pending status if the line level is still being held high. (These + rules are documented in the GICv3 specification descriptions of the ICPENDR + and ISPENDR registers.) For a level triggered interrupt the value accessed + here is that of the latch which is set by ISPENDR and cleared by ICPENDR or + interrupt activation, whereas the value returned by a guest read from + ISPENDR is the logical OR of the latch value and the input line level. + + Raw access to the latch state is provided to userspace so that it can save + and restore the entire GIC internal state (which is defined by the + combination of the current input line level and the latch state, and cannot + be deduced from purely the line level and the value of the ISPENDR + registers). + + Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have + RAZ/WI semantics, meaning that reads always return 0 and writes are always + ignored. + + Errors: + -ENXIO: Getting or setting this register is not yet supported + -EBUSY: One or more VCPUs are running + + + KVM_DEV_ARM_VGIC_CPU_SYSREGS + Attributes: + The attr field of kvm_device_attr encodes two values: + bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 | + values: | mpidr | RES | instr | + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows: + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + The instr field encodes the system register to access based on the fields + defined in the A64 instruction set encoding for system register access + (RES means the bits are reserved for future use and should be zero): + + | 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 | + | Op 0 | Op1 | CRn | CRm | Op2 | + + All system regs accessed through this API are (rw, 64-bit) and + kvm_device_attr.addr points to a __u64 value. + + KVM_DEV_ARM_VGIC_CPU_SYSREGS accesses the CPU interface registers for the + CPU specified by the mpidr field. + + Errors: + -ENXIO: Getting or setting this register is not yet supported + -EBUSY: VCPU is running + -EINVAL: Invalid mpidr supplied + + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + kvm_device_attr.addr points to a __u32 value. + + Errors: + -EINVAL: Value set is out of the expected range + -EBUSY: Value has already be set. + + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC, no additional parameter in + kvm_device_attr.addr. + Errors: + -ENXIO: VGIC not properly configured as required prior to calling + this attribute + -ENODEV: no online VCPU + -ENOMEM: memory shortage when allocating vgic internal data + + + KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO + Attributes: + The attr field of kvm_device_attr encodes the following values: + bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 | + values: | mpidr | info | vINTID | + + The vINTID specifies which set of IRQs is reported on. + + The info field specifies which information userspace wants to get or set + using this interface. Currently we support the following info values: + + VGIC_LEVEL_INFO_LINE_LEVEL: + Get/Set the input level of the IRQ line for a set of 32 contiguously + numbered interrupts. + vINTID must be a multiple of 32. + + kvm_device_attr.addr points to a __u32 value which will contain a + bitmap where a set bit means the interrupt level is asserted. + + Bit[n] indicates the status for interrupt vINTID + n. + + SGIs and any interrupt with a higher ID than the number of interrupts + supported, will be RAZ/WI. LPIs are always edge-triggered and are + therefore not supported by this interface. + + PPIs are reported per VCPU as specified in the mpidr field, and SPIs are + reported with the same value regardless of the mpidr specified. + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows: + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt index 89182f8..76e61c8 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt @@ -1,24 +1,19 @@ -ARM Virtual Generic Interrupt Controller (VGIC) -=============================================== +ARM Virtual Generic Interrupt Controller v2 (VGIC) +================================================== Device types supported: KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0 - KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0 - KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller -Only one VGIC instance of the V2/V3 types above may be instantiated through -either this API or the legacy KVM_CREATE_IRQCHIP api. The created VGIC will -act as the VM interrupt controller, requiring emulated user-space devices to -inject interrupts to the VGIC instead of directly to CPUs. +Only one VGIC instance may be instantiated through either this API or the +legacy KVM_CREATE_IRQCHIP API. The created VGIC will act as the VM interrupt +controller, requiring emulated user-space devices to inject interrupts to the +VGIC instead of directly to CPUs. -Creating a guest GICv3 device requires a host GICv3 as well. -GICv3 implementations with hardware compatibility support allow a guest GICv2 -as well. +GICv3 implementations with hardware compatibility support allow creating a +guest GICv2 through this interface. For information on creating a guest GICv3 +device and guest ITS devices, see arm-vgic-v3.txt. It is not possible to +create both a GICv3 and GICv2 device on the same VM. -Creating a virtual ITS controller requires a host GICv3 (but does not depend -on having physical ITS controllers). -There can be multiple ITS controllers per guest, each of them has to have -a separate, non-overlapping MMIO region. Groups: KVM_DEV_ARM_VGIC_GRP_ADDR @@ -32,26 +27,13 @@ Groups: Base address in the guest physical address space of the GIC virtual cpu interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. This address needs to be 4K aligned and the region covers 4 KByte. - - KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit) - Base address in the guest physical address space of the GICv3 distributor - register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. - This address needs to be 64K aligned and the region covers 64 KByte. - - KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit) - Base address in the guest physical address space of the GICv3 - redistributor register mappings. There are two 64K pages for each - VCPU and all of the redistributor pages are contiguous. - Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. - This address needs to be 64K aligned. - - KVM_VGIC_V3_ADDR_TYPE_ITS (rw, 64-bit) - Base address in the guest physical address space of the GICv3 ITS - control register frame. The ITS allows MSI(-X) interrupts to be - injected into guests. This extension is optional. If the kernel - does not support the ITS, the call returns -ENODEV. - Only valid for KVM_DEV_TYPE_ARM_VGIC_ITS. - This address needs to be 64K aligned and the region covers 128K. + Errors: + -E2BIG: Address outside of addressable IPA range + -EINVAL: Incorrectly aligned address + -EEXIST: Address already configured + -ENXIO: The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT: Invalid user pointer for attr->addr. KVM_DEV_ARM_VGIC_GRP_DIST_REGS Attributes: -- cgit v0.10.2