/* linux/arch/arm/plat-s3c24xx/dma.c * * Copyright 2003-2006 Simtec Electronics * Ben Dooks * * S3C2410 DMA core * * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifdef CONFIG_S3C2410_DMA_DEBUG #define DEBUG #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* io map for dma */ static void __iomem *dma_base; static struct kmem_cache *dma_kmem; static int dma_channels; static struct s3c24xx_dma_selection dma_sel; /* debugging functions */ #define BUF_MAGIC (0xcafebabe) #define dmawarn(fmt...) printk(KERN_DEBUG fmt) #define dma_regaddr(chan, reg) ((chan)->regs + (reg)) #if 1 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) #else static inline void dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) { pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) /* captured register state for debug */ struct s3c2410_dma_regstate { unsigned long dcsrc; unsigned long disrc; unsigned long dstat; unsigned long dcon; unsigned long dmsktrig; }; #ifdef CONFIG_S3C2410_DMA_DEBUG /* dmadbg_showregs * * simple debug routine to print the current state of the dma registers */ static void dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) { regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); } static void dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) { printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", chan->number, fname, line, regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, regs->dcon); } static void dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) { struct s3c2410_dma_regstate state; dmadbg_capture(chan, &state); printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", chan->number, fname, line, chan->load_state, chan->curr, chan->next, chan->end); dmadbg_dumpregs(fname, line, chan, &state); } static void dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) { struct s3c2410_dma_regstate state; dmadbg_capture(chan, &state); dmadbg_dumpregs(fname, line, chan, &state); } #define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan)) #define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan)) #else #define dbg_showregs(chan) do { } while(0) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ /* s3c2410_dma_stats_timeout * * Update DMA stats from timeout info */ static void s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) { if (stats == NULL) return; if (val > stats->timeout_longest) stats->timeout_longest = val; if (val < stats->timeout_shortest) stats->timeout_shortest = val; stats->timeout_avg += val; } /* s3c2410_dma_waitforload * * wait for the DMA engine to load a buffer, and update the state accordingly */ static int s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) { int timeout = chan->load_timeout; int took; if (chan->load_state != S3C2410_DMALOAD_1LOADED) { printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); return 0; } if (chan->stats != NULL) chan->stats->loads++; while (--timeout > 0) { if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { took = chan->load_timeout - timeout; s3c2410_dma_stats_timeout(chan->stats, took); switch (chan->load_state) { case S3C2410_DMALOAD_1LOADED: chan->load_state = S3C2410_DMALOAD_1RUNNING; break; default: printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); } return 1; } } if (chan->stats != NULL) { chan->stats->timeout_failed++; } return 0; } /* s3c2410_dma_loadbuffer * * load a buffer, and update the channel state */ static inline int s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf) { unsigned long reload; if (buf == NULL) { dmawarn("buffer is NULL\n"); return -EINVAL; } pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", buf, (unsigned long)buf->data, buf->size); /* check the state of the channel before we do anything */ if (chan->load_state == S3C2410_DMALOAD_1LOADED) { dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); } if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); } /* it would seem sensible if we are the last buffer to not bother * with the auto-reload bit, so that the DMA engine will not try * and load another transfer after this one has finished... */ if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("load_state is none, checking for noreload (next=%p)\n", buf->next); reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; } else { //pr_debug("load_state is %d => autoreload\n", chan->load_state); reload = S3C2410_DCON_AUTORELOAD; } if ((buf->data & 0xf0000000) != 0x30000000) { dmawarn("dmaload: buffer is %p\n", (void *)buf->data); } writel(buf->data, chan->addr_reg); dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | reload | (buf->size/chan->xfer_unit)); chan->next = buf->next; /* update the state of the channel */ switch (chan->load_state) { case S3C2410_DMALOAD_NONE: chan->load_state = S3C2410_DMALOAD_1LOADED; break; case S3C2410_DMALOAD_1RUNNING: chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; break; default: dmawarn("dmaload: unknown state %d in loadbuffer\n", chan->load_state); break; } return 0; } /* s3c2410_dma_call_op * * small routine to call the op routine with the given op if it has been * registered */ static void s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) { if (chan->op_fn != NULL) { (chan->op_fn)(chan, op); } } /* s3c2410_dma_buffdone * * small wrapper to check if callback routine needs to be called, and * if so, call it */ static inline void s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, enum s3c2410_dma_buffresult result) { #if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); #endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); } } /* s3c2410_dma_start * * start a dma channel going */ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) { unsigned long tmp; unsigned long flags; pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); local_irq_save(flags); if (chan->state == S3C2410_DMA_RUNNING) { pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); local_irq_restore(flags); return 0; } chan->state = S3C2410_DMA_RUNNING; /* check wether there is anything to load, and if not, see * if we can find anything to load */ if (chan->load_state == S3C2410_DMALOAD_NONE) { if (chan->next == NULL) { printk(KERN_ERR "dma%d: channel has nothing loaded\n", chan->number); chan->state = S3C2410_DMA_IDLE; local_irq_restore(flags); return -EINVAL; } s3c2410_dma_loadbuffer(chan, chan->next); } dbg_showchan(chan); /* enable the channel */ if (!chan->irq_enabled) { enable_irq(chan->irq); chan->irq_enabled = 1; } /* start the channel going */ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); tmp &= ~S3C2410_DMASKTRIG_STOP; tmp |= S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); #if 0 /* the dma buffer loads should take care of clearing the AUTO * reloading feature */ tmp = dma_rdreg(chan, S3C2410_DMA_DCON); tmp &= ~S3C2410_DCON_NORELOAD; dma_wrreg(chan, S3C2410_DMA_DCON, tmp); #endif s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); dbg_showchan(chan); /* if we've only loaded one buffer onto the channel, then chec * to see if we have another, and if so, try and load it so when * the first buffer is finished, the new one will be loaded onto * the channel */ if (chan->next != NULL) { if (chan->load_state == S3C2410_DMALOAD_1LOADED) { if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); } } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { s3c2410_dma_loadbuffer(chan, chan->next); } } local_irq_restore(flags); return 0; } /* s3c2410_dma_canload * * work out if we can queue another buffer into the DMA engine */ static int s3c2410_dma_canload(struct s3c2410_dma_chan *chan) { if (chan->load_state == S3C2410_DMALOAD_NONE || chan->load_state == S3C2410_DMALOAD_1RUNNING) return 1; return 0; } /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. * * id the device driver's id information for this buffer * data the physical address of the buffer data * size the size of the buffer in bytes * * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART * is checked, and if set, the channel is started. If this flag isn't set, * then an error will be returned. * * It is possible to queue more than one DMA buffer onto a channel at * once, and the code will deal with the re-loading of the next buffer * when necessary. */ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; if (chan == NULL) return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __func__, id, (unsigned int)data, size); buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", __func__, (long)sizeof(*buf)); return -ENOMEM; } //pr_debug("%s: new buffer %p\n", __func__, buf); //dbg_showchan(chan); buf->next = NULL; buf->data = buf->ptr = data; buf->size = size; buf->id = id; buf->magic = BUF_MAGIC; local_irq_save(flags); if (chan->curr == NULL) { /* we've got nothing loaded... */ pr_debug("%s: buffer %p queued onto empty channel\n", __func__, buf); chan->curr = buf; chan->end = buf; chan->next = NULL; } else { pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); } else { chan->end->next = buf; chan->end = buf; } } /* if necessary, update the next buffer field */ if (chan->next == NULL) chan->next = buf; /* check to see if we can load a buffer */ if (chan->state == S3C2410_DMA_RUNNING) { if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { printk(KERN_ERR "dma%d: loadbuffer:" "timeout loading buffer\n", chan->number); dbg_showchan(chan); local_irq_restore(flags); return -EINVAL; } } while (s3c2410_dma_canload(chan) && chan->next != NULL) { s3c2410_dma_loadbuffer(chan, chan->next); } } else if (chan->state == S3C2410_DMA_IDLE) { if (chan->flags & S3C2410_DMAF_AUTOSTART) { s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, S3C2410_DMAOP_START); } } local_irq_restore(flags); return 0; } EXPORT_SYMBOL(s3c2410_dma_enqueue); static inline void s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) { int magicok = (buf->magic == BUF_MAGIC); buf->magic = -1; if (magicok) { kmem_cache_free(dma_kmem, buf); } else { printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); } } /* s3c2410_dma_lastxfer * * called when the system is out of buffers, to ensure that the channel * is prepared for shutdown. */ static inline void s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { #if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); #endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: break; case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", chan->number, __func__); return; } break; case S3C2410_DMALOAD_1LOADED_1RUNNING: /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; default: pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", chan->number, chan->load_state); return; } /* hopefully this'll shut the damned thing up after the transfer... */ dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); } #define dmadbg2(x...) static irqreturn_t s3c2410_dma_irq(int irq, void *devpw) { struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; struct s3c2410_dma_buf *buf; buf = chan->curr; dbg_showchan(chan); /* modify the channel state */ switch (chan->load_state) { case S3C2410_DMALOAD_1RUNNING: /* TODO - if we are running only one buffer, we probably * want to reload here, and then worry about the buffer * callback */ chan->load_state = S3C2410_DMALOAD_NONE; break; case S3C2410_DMALOAD_1LOADED: /* iirc, we should go back to NONE loaded here, we * had a buffer, and it was never verified as being * loaded. */ chan->load_state = S3C2410_DMALOAD_NONE; break; case S3C2410_DMALOAD_1LOADED_1RUNNING: /* we'll worry about checking to see if another buffer is * ready after we've called back the owner. This should * ensure we do not wait around too long for the DMA * engine to start the next transfer */ chan->load_state = S3C2410_DMALOAD_1LOADED; break; case S3C2410_DMALOAD_NONE: printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", chan->number); break; default: printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", chan->number, chan->load_state); break; } if (buf != NULL) { /* update the chain to make sure that if we load any more * buffers when we call the callback function, things should * work properly */ chan->curr = buf->next; buf->next = NULL; if (buf->magic != BUF_MAGIC) { printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", chan->number, __func__, buf); return IRQ_HANDLED; } s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); /* free resouces */ s3c2410_dma_freebuf(buf); } else { } /* only reload if the channel is still running... our buffer done * routine may have altered the state by requesting the dma channel * to stop or shutdown... */ /* todo: check that when the channel is shut-down from inside this * function, we cope with unsetting reload, etc */ if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { unsigned long flags; switch (chan->load_state) { case S3C2410_DMALOAD_1RUNNING: /* don't need to do anything for this state */ break; case S3C2410_DMALOAD_NONE: /* can load buffer immediately */ break; case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", chan->number, __func__); return IRQ_HANDLED; } break; case S3C2410_DMALOAD_1LOADED_1RUNNING: goto no_load; default: printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", chan->number, chan->load_state); return IRQ_HANDLED; } local_irq_save(flags); s3c2410_dma_loadbuffer(chan, chan->next); local_irq_restore(flags); } else { s3c2410_dma_lastxfer(chan); /* see if we can stop this channel.. */ if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, S3C2410_DMAOP_STOP); } } no_load: return IRQ_HANDLED; } static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); /* s3c2410_request_dma * * get control of an dma channel */ int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); local_irq_save(flags); chan = s3c2410_dma_map_channel(channel); if (chan == NULL) { local_irq_restore(flags); return -EBUSY; } dbg_showchan(chan); chan->client = client; chan->in_use = 1; if (!chan->irq_claimed) { pr_debug("dma%d: %s : requesting irq %d\n", channel, __func__, chan->irq); chan->irq_claimed = 1; local_irq_restore(flags); err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, client->name, (void *)chan); local_irq_save(flags); if (err) { chan->in_use = 0; chan->irq_claimed = 0; local_irq_restore(flags); printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", client->name, chan->irq, chan->number); return err; } chan->irq_enabled = 1; } local_irq_restore(flags); /* need to setup */ pr_debug("%s: channel initialised, %p\n", __func__, chan); return chan->number | DMACH_LOW_LEVEL; } EXPORT_SYMBOL(s3c2410_dma_request); /* s3c2410_dma_free * * release the given channel back to the system, will stop and flush * any outstanding transfers, and ensure the channel is ready for the * next claimant. * * Note, although a warning is currently printed if the freeing client * info is not the same as the registrant's client info, the free is still * allowed to go through. */ int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; if (chan == NULL) return -EINVAL; local_irq_save(flags); if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); } /* sort out stopping and freeing the channel */ if (chan->state != S3C2410_DMA_IDLE) { pr_debug("%s: need to stop dma channel %p\n", __func__, chan); /* possibly flush the channel */ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); } chan->client = NULL; chan->in_use = 0; if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); chan->irq_claimed = 0; if (!(channel & DMACH_LOW_LEVEL)) s3c_dma_chan_map[channel] = NULL; local_irq_restore(flags); return 0; } EXPORT_SYMBOL(s3c2410_dma_free); static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { unsigned long flags; unsigned long tmp; pr_debug("%s:\n", __func__); dbg_showchan(chan); local_irq_save(flags); s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); tmp |= S3C2410_DMASKTRIG_STOP; //tmp &= ~S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); #if 0 /* should also clear interrupts, according to WinCE BSP */ tmp = dma_rdreg(chan, S3C2410_DMA_DCON); tmp |= S3C2410_DCON_NORELOAD; dma_wrreg(chan, S3C2410_DMA_DCON, tmp); #endif /* should stop do this, or should we wait for flush? */ chan->state = S3C2410_DMA_IDLE; chan->load_state = S3C2410_DMALOAD_NONE; local_irq_restore(flags); return 0; } static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) { unsigned long tmp; unsigned int timeout = 0x10000; while (timeout-- > 0) { tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); if (!(tmp & S3C2410_DMASKTRIG_ON)) return; } pr_debug("dma%d: failed to stop?\n", chan->number); } /* s3c2410_dma_flush * * stop the channel, and remove all current and pending transfers */ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) { struct s3c2410_dma_buf *buf, *next; unsigned long flags; pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number); dbg_showchan(chan); local_irq_save(flags); if (chan->state != S3C2410_DMA_IDLE) { pr_debug("%s: stopping channel...\n", __func__ ); s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); } buf = chan->curr; if (buf == NULL) buf = chan->next; chan->curr = chan->next = chan->end = NULL; if (buf != NULL) { for ( ; buf != NULL; buf = next) { next = buf->next; pr_debug("%s: free buffer %p, next %p\n", __func__, buf, buf->next); s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); s3c2410_dma_freebuf(buf); } } dbg_showregs(chan); s3c2410_dma_waitforstop(chan); #if 0 /* should also clear interrupts, according to WinCE BSP */ { unsigned long tmp; tmp = dma_rdreg(chan, S3C2410_DMA_DCON); tmp |= S3C2410_DCON_NORELOAD; dma_wrreg(chan, S3C2410_DMA_DCON, tmp); } #endif dbg_showregs(chan); local_irq_restore(flags); return 0; } static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) { unsigned long flags; local_irq_save(flags); dbg_showchan(chan); /* if we've only loaded one buffer onto the channel, then chec * to see if we have another, and if so, try and load it so when * the first buffer is finished, the new one will be loaded onto * the channel */ if (chan->next != NULL) { if (chan->load_state == S3C2410_DMALOAD_1LOADED) { if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); } } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { s3c2410_dma_loadbuffer(chan, chan->next); } } local_irq_restore(flags); return 0; } int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; switch (op) { case S3C2410_DMAOP_START: return s3c2410_dma_start(chan); case S3C2410_DMAOP_STOP: return s3c2410_dma_dostop(chan); case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: return -ENOENT; case S3C2410_DMAOP_FLUSH: return s3c2410_dma_flush(chan); case S3C2410_DMAOP_STARTED: return s3c2410_dma_started(chan); case S3C2410_DMAOP_TIMEOUT: return 0; } return -ENOENT; /* unknown, don't bother */ } EXPORT_SYMBOL(s3c2410_dma_ctrl); /* DMA configuration for each channel * * DISRCC -> source of the DMA (AHB,APB) * DISRC -> source address of the DMA * DIDSTC -> destination of the DMA (AHB,APD) * DIDST -> destination address of the DMA */ /* s3c2410_dma_config * * xfersize: size of unit in bytes (1,2,4) */ int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; dcon = chan->dcon & dma_sel.dcon_mask; pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: case DMACH_I2S_OUT: case DMACH_PCM_IN: case DMACH_PCM_OUT: case DMACH_MIC_IN: default: dcon |= S3C2410_DCON_HANDSHAKE; dcon |= S3C2410_DCON_SYNC_PCLK; break; case DMACH_SDI: /* note, ensure if need HANDSHAKE or not */ dcon |= S3C2410_DCON_SYNC_PCLK; break; case DMACH_XD0: case DMACH_XD1: dcon |= S3C2410_DCON_HANDSHAKE; dcon |= S3C2410_DCON_SYNC_HCLK; break; } switch (xferunit) { case 1: dcon |= S3C2410_DCON_BYTE; break; case 2: dcon |= S3C2410_DCON_HALFWORD; break; case 4: dcon |= S3C2410_DCON_WORD; break; default: pr_debug("%s: bad transfer size %d\n", __func__, xferunit); return -EINVAL; } dcon |= S3C2410_DCON_HWTRIG; dcon |= S3C2410_DCON_INTREQ; pr_debug("%s: dcon now %08x\n", __func__, dcon); chan->dcon = dcon; chan->xfer_unit = xferunit; return 0; } EXPORT_SYMBOL(s3c2410_dma_config); /* s3c2410_dma_devconfig * * configure the dma source/destination hardware type and address * * source: DMA_FROM_DEVICE: source is hardware * DMA_TO_DEVICE: source is memory * * devaddr: physical address of the source */ int s3c2410_dma_devconfig(enum dma_ch channel, enum dma_data_direction source, unsigned long devaddr) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int hwcfg; if (chan == NULL) return -EINVAL; pr_debug("%s: source=%d, devaddr=%08lx\n", __func__, (int)source, devaddr); chan->source = source; chan->dev_addr = devaddr; switch (chan->req_ch) { case DMACH_XD0: case DMACH_XD1: hwcfg = 0; /* AHB */ break; default: hwcfg = S3C2410_DISRCC_APB; } /* always assume our peripheral desintation is a fixed * address in memory. */ hwcfg |= S3C2410_DISRCC_INC; switch (source) { case DMA_FROM_DEVICE: /* source is hardware */ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); break; case DMA_TO_DEVICE: /* source is memory */ pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); break; default: printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); return -EINVAL; } if (dma_sel.direction != NULL) (dma_sel.direction)(chan, chan->map, source); return 0; } EXPORT_SYMBOL(s3c2410_dma_devconfig); /* s3c2410_dma_getposition * * returns the current transfer points for the dma source and destination */ int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); if (dst != NULL) *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); return 0; } EXPORT_SYMBOL(s3c2410_dma_getposition); /* system core operations */ #ifdef CONFIG_PM static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp) { printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { /* the dma channel is still working, which is probably * a bad thing to do over suspend/resume. We stop the * channel and assume that the client is either going to * retry after resume, or that it is broken. */ printk(KERN_INFO "dma: stopping channel %d due to suspend\n", cp->number); s3c2410_dma_dostop(cp); } } static int s3c2410_dma_suspend(void) { struct s3c2410_dma_chan *cp = s3c2410_chans; int channel; for (channel = 0; channel < dma_channels; cp++, channel++) s3c2410_dma_suspend_chan(cp); return 0; } static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) { unsigned int no = cp->number | DMACH_LOW_LEVEL; /* restore channel's hardware configuration */ if (!cp->in_use) return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); s3c2410_dma_config(no, cp->xfer_unit); s3c2410_dma_devconfig(no, cp->source, cp->dev_addr); /* re-select the dma source for this channel */ if (cp->map != NULL) dma_sel.select(cp, cp->map); } static void s3c2410_dma_resume(void) { struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; int channel; for (channel = dma_channels - 1; channel >= 0; cp--, channel--) s3c2410_dma_resume_chan(cp); } #else #define s3c2410_dma_suspend NULL #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ struct syscore_ops dma_syscore_ops = { .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, }; /* kmem cache implementation */ static void s3c2410_dma_cache_ctor(void *p) { memset(p, 0, sizeof(struct s3c2410_dma_buf)); } /* initialisation code */ static int __init s3c24xx_dma_syscore_init(void) { register_syscore_ops(&dma_syscore_ops); return 0; } late_initcall(s3c24xx_dma_syscore_init); int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, unsigned int stride) { struct s3c2410_dma_chan *cp; int channel; int ret; printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n"); dma_channels = channels; dma_base = ioremap(S3C24XX_PA_DMA, stride * channels); if (dma_base == NULL) { printk(KERN_ERR "dma failed to remap register block\n"); return -ENOMEM; } dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0, SLAB_HWCACHE_ALIGN, s3c2410_dma_cache_ctor); if (dma_kmem == NULL) { printk(KERN_ERR "dma failed to make kmem cache\n"); ret = -ENOMEM; goto err; } for (channel = 0; channel < channels; channel++) { cp = &s3c2410_chans[channel]; memset(cp, 0, sizeof(struct s3c2410_dma_chan)); /* dma channel irqs are in order.. */ cp->number = channel; cp->irq = channel + irq; cp->regs = dma_base + (channel * stride); /* point current stats somewhere */ cp->stats = &cp->stats_store; cp->stats_store.timeout_shortest = LONG_MAX; /* basic channel configuration */ cp->load_timeout = 1<<18; printk("DMA channel %d at %p, irq %d\n", cp->number, cp->regs, cp->irq); } return 0; err: kmem_cache_destroy(dma_kmem); iounmap(dma_base); dma_base = NULL; return ret; } int __init s3c2410_dma_init(void) { return s3c24xx_dma_init(4, IRQ_DMA0, 0x40); } static inline int is_channel_valid(unsigned int channel) { return (channel & DMA_CH_VALID); } static struct s3c24xx_dma_order *dma_order; /* s3c2410_dma_map_channel() * * turn the virtual channel number into a real, and un-used hardware * channel. * * first, try the dma ordering given to us by either the relevant * dma code, or the board. Then just find the first usable free * channel */ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) { struct s3c24xx_dma_order_ch *ord = NULL; struct s3c24xx_dma_map *ch_map; struct s3c2410_dma_chan *dmach; int ch; if (dma_sel.map == NULL || channel > dma_sel.map_size) return NULL; ch_map = dma_sel.map + channel; /* first, try the board mapping */ if (dma_order) { ord = &dma_order->channels[channel]; for (ch = 0; ch < dma_channels; ch++) { int tmp; if (!is_channel_valid(ord->list[ch])) continue; tmp = ord->list[ch] & ~DMA_CH_VALID; if (s3c2410_chans[tmp].in_use == 0) { ch = tmp; goto found; } } if (ord->flags & DMA_CH_NEVER) return NULL; } /* second, search the channel map for first free */ for (ch = 0; ch < dma_channels; ch++) { if (!is_channel_valid(ch_map->channels[ch])) continue; if (s3c2410_chans[ch].in_use == 0) { printk("mapped channel %d to %d\n", channel, ch); break; } } if (ch >= dma_channels) return NULL; /* update our channel mapping */ found: dmach = &s3c2410_chans[ch]; dmach->map = ch_map; dmach->req_ch = channel; s3c_dma_chan_map[channel] = dmach; /* select the channel */ (dma_sel.select)(dmach, ch_map); return dmach; } static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) { return 0; } int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) { struct s3c24xx_dma_map *nmap; size_t map_sz = sizeof(*nmap) * sel->map_size; int ptr; nmap = kmemdup(sel->map, map_sz, GFP_KERNEL); if (nmap == NULL) return -ENOMEM; memcpy(&dma_sel, sel, sizeof(*sel)); dma_sel.map = nmap; for (ptr = 0; ptr < sel->map_size; ptr++) s3c24xx_dma_check_entry(nmap+ptr, ptr); return 0; } int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord) { struct s3c24xx_dma_order *nord = dma_order; if (nord == NULL) nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL); if (nord == NULL) { printk(KERN_ERR "no memory to store dma channel order\n"); return -ENOMEM; } dma_order = nord; memcpy(nord, ord, sizeof(struct s3c24xx_dma_order)); return 0; }