/* w83627ehf - Driver for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip Copyright (C) 2005 Jean Delvare Copyright (C) 2006 Yuan Mu (Winbond), Rudolf Marek David Hubbard Daniel J Blueman Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00) Shamelessly ripped from the w83627hf driver Copyright (C) 2003 Mark Studebaker Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help in testing and debugging this driver. This driver also supports the W83627EHG, which is the lead-free version of the W83627EHF. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Supports the following chips: Chip #vin #fan #pwm #temp chip IDs man ID w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 0x8860 0xa1 w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3 nct6776f 9 5 3 9 0xC330 0xc1 0x5ca3 */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include "lm75.h" enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b, nct6775, nct6776 }; /* used to set data->name = w83627ehf_device_names[data->sio_kind] */ static const char * const w83627ehf_device_names[] = { "w83627ehf", "w83627dhg", "w83627dhg", "w83667hg", "w83667hg", "nct6775", "nct6776", }; static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); static unsigned short fan_debounce; module_param(fan_debounce, ushort, 0); MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define DRVNAME "w83627ehf" /* * Super-I/O constants and functions */ #define W83627EHF_LD_HWM 0x0b #define W83667HG_LD_VID 0x0d #define SIO_REG_LDSEL 0x07 /* Logical device select */ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ #define SIO_REG_EN_VRM10 0x2C /* GPIO3, GPIO4 selection */ #define SIO_REG_ENABLE 0x30 /* Logical device enable */ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_REG_VID_CTRL 0xF0 /* VID control */ #define SIO_REG_VID_DATA 0xF1 /* VID data */ #define SIO_W83627EHF_ID 0x8850 #define SIO_W83627EHG_ID 0x8860 #define SIO_W83627DHG_ID 0xa020 #define SIO_W83627DHG_P_ID 0xb070 #define SIO_W83667HG_ID 0xa510 #define SIO_W83667HG_B_ID 0xb350 #define SIO_NCT6775_ID 0xb470 #define SIO_NCT6776_ID 0xc330 #define SIO_ID_MASK 0xFFF0 static inline void superio_outb(int ioreg, int reg, int val) { outb(reg, ioreg); outb(val, ioreg + 1); } static inline int superio_inb(int ioreg, int reg) { outb(reg, ioreg); return inb(ioreg + 1); } static inline void superio_select(int ioreg, int ld) { outb(SIO_REG_LDSEL, ioreg); outb(ld, ioreg + 1); } static inline void superio_enter(int ioreg) { outb(0x87, ioreg); outb(0x87, ioreg); } static inline void superio_exit(int ioreg) { outb(0xaa, ioreg); outb(0x02, ioreg); outb(0x02, ioreg + 1); } /* * ISA constants */ #define IOREGION_ALIGNMENT (~7) #define IOREGION_OFFSET 5 #define IOREGION_LENGTH 2 #define ADDR_REG_OFFSET 0 #define DATA_REG_OFFSET 1 #define W83627EHF_REG_BANK 0x4E #define W83627EHF_REG_CONFIG 0x40 /* Not currently used: * REG_MAN_ID has the value 0x5ca3 for all supported chips. * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. * REG_MAN_ID is at port 0x4f * REG_CHIP_ID is at port 0x58 */ static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; /* The W83627EHF registers for nr=7,8,9 are in bank 5 */ #define W83627EHF_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ (0x554 + (((nr) - 7) * 2))) #define W83627EHF_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ (0x555 + (((nr) - 7) * 2))) #define W83627EHF_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ (0x550 + (nr) - 7)) static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e }; static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 }; static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 }; static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 }; /* Fan clock dividers are spread over the following five registers */ #define W83627EHF_REG_FANDIV1 0x47 #define W83627EHF_REG_FANDIV2 0x4B #define W83627EHF_REG_VBAT 0x5D #define W83627EHF_REG_DIODE 0x59 #define W83627EHF_REG_SMI_OVT 0x4C /* NCT6775F has its own fan divider registers */ #define NCT6775_REG_FANDIV1 0x506 #define NCT6775_REG_FANDIV2 0x507 #define NCT6775_REG_FAN_DEBOUNCE 0xf0 #define W83627EHF_REG_ALARM1 0x459 #define W83627EHF_REG_ALARM2 0x45A #define W83627EHF_REG_ALARM3 0x45B #define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2 */ #define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3 */ /* SmartFan registers */ #define W83627EHF_REG_FAN_STEPUP_TIME 0x0f #define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e /* DC or PWM output fan configuration */ static const u8 W83627EHF_REG_PWM_ENABLE[] = { 0x04, /* SYS FAN0 output mode and PWM mode */ 0x04, /* CPU FAN0 output mode and PWM mode */ 0x12, /* AUX FAN mode */ 0x62, /* CPU FAN1 mode */ }; static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 }; /* FAN Duty Cycle, be used to control */ static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; /* Advanced Fan control, some values are common for all fans */ static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 }; static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 }; static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[] = { 0xff, 0x67, 0xff, 0x69 }; static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[] = { 0xff, 0x68, 0xff, 0x6a }; static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b }; static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] = { 0x68, 0x6a, 0x6c }; static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301 }; static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302 }; static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305 }; static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306 }; static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307 }; static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309 }; static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a }; static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b }; static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642}; static const u16 NCT6775_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d }; static const u16 NCT6775_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A }; static const u16 NCT6775_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D }; static const u16 NCT6775_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C }; static const u16 NCT6775_REG_TEMP_SOURCE[] = { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 }; static const char *const w83667hg_b_temp_label[] = { "SYSTIN", "CPUTIN", "AUXTIN", "AMDTSI", "PECI Agent 1", "PECI Agent 2", "PECI Agent 3", "PECI Agent 4" }; static const char *const nct6775_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN", "AMD SB-TSI", "PECI Agent 0", "PECI Agent 1", "PECI Agent 2", "PECI Agent 3", "PECI Agent 4", "PECI Agent 5", "PECI Agent 6", "PECI Agent 7", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP" }; static const char *const nct6776_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN", "SMBUSMASTER 0", "SMBUSMASTER 1", "SMBUSMASTER 2", "SMBUSMASTER 3", "SMBUSMASTER 4", "SMBUSMASTER 5", "SMBUSMASTER 6", "SMBUSMASTER 7", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP", "BYTE_TEMP" }; #define NUM_REG_TEMP ARRAY_SIZE(NCT6775_REG_TEMP) static int is_word_sized(u16 reg) { return ((((reg & 0xff00) == 0x100 || (reg & 0xff00) == 0x200) && ((reg & 0x00ff) == 0x50 || (reg & 0x00ff) == 0x53 || (reg & 0x00ff) == 0x55)) || (reg & 0xfff0) == 0x630 || reg == 0x640 || reg == 0x642 || ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || reg == 0x73 || reg == 0x75 || reg == 0x77 ); } /* * Conversions */ /* 1 is PWM mode, output in ms */ static inline unsigned int step_time_from_reg(u8 reg, u8 mode) { return mode ? 100 * reg : 400 * reg; } static inline u8 step_time_to_reg(unsigned int msec, u8 mode) { return SENSORS_LIMIT((mode ? (msec + 50) / 100 : (msec + 200) / 400), 1, 255); } static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) { if (reg == 0 || reg == 255) return 0; return 1350000U / (reg << divreg); } static unsigned int fan_from_reg13(u16 reg, unsigned int divreg) { if ((reg & 0xff1f) == 0xff1f) return 0; reg = (reg & 0x1f) | ((reg & 0xff00) >> 3); if (reg == 0) return 0; return 1350000U / reg; } static unsigned int fan_from_reg16(u16 reg, unsigned int divreg) { if (reg == 0 || reg == 0xffff) return 0; /* * Even though the registers are 16 bit wide, the fan divisor * still applies. */ return 1350000U / (reg << divreg); } static inline unsigned int div_from_reg(u8 reg) { return 1 << reg; } /* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */ static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 }; static inline long in_from_reg(u8 reg, u8 nr) { return reg * scale_in[nr]; } static inline u8 in_to_reg(u32 val, u8 nr) { return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0, 255); } /* * Data structures and manipulation thereof */ struct w83627ehf_data { int addr; /* IO base of hw monitor block */ const char *name; struct device *hwmon_dev; struct mutex lock; u16 reg_temp[NUM_REG_TEMP]; u16 reg_temp_over[NUM_REG_TEMP]; u16 reg_temp_hyst[NUM_REG_TEMP]; u16 reg_temp_config[NUM_REG_TEMP]; u8 temp_src[NUM_REG_TEMP]; const char * const *temp_label; const u16 *REG_PWM; const u16 *REG_TARGET; const u16 *REG_FAN; const u16 *REG_FAN_MIN; const u16 *REG_FAN_START_OUTPUT; const u16 *REG_FAN_STOP_OUTPUT; const u16 *REG_FAN_STOP_TIME; const u16 *REG_FAN_MAX_OUTPUT; const u16 *REG_FAN_STEP_OUTPUT; unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* Register values */ u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ u8 in[10]; /* Register value */ u8 in_max[10]; /* Register value */ u8 in_min[10]; /* Register value */ unsigned int rpm[5]; u16 fan_min[5]; u8 fan_div[5]; u8 has_fan; /* some fan inputs can be disabled */ u8 has_fan_min; /* some fans don't have min register */ bool has_fan_div; u8 temp_type[3]; s16 temp[9]; s16 temp_max[9]; s16 temp_max_hyst[9]; u32 alarms; u8 caseopen; u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ u8 pwm_enable[4]; /* 1->manual 2->thermal cruise mode (also called SmartFan I) 3->fan speed cruise mode 4->variable thermal cruise (also called SmartFan III) 5->enhanced variable thermal cruise (also called SmartFan IV) */ u8 pwm_enable_orig[4]; /* original value of pwm_enable */ u8 pwm_num; /* number of pwm */ u8 pwm[4]; u8 target_temp[4]; u8 tolerance[4]; u8 fan_start_output[4]; /* minimum fan speed when spinning up */ u8 fan_stop_output[4]; /* minimum fan speed when spinning down */ u8 fan_stop_time[4]; /* time at minimum before disabling fan */ u8 fan_max_output[4]; /* maximum fan speed */ u8 fan_step_output[4]; /* rate of change output value */ u8 vid; u8 vrm; u16 have_temp; u8 in6_skip; }; struct w83627ehf_sio_data { int sioreg; enum kinds kind; }; /* * On older chips, only registers 0x50-0x5f are banked. * On more recent chips, all registers are banked. * Assume that is the case and set the bank number for each access. * Cache the bank number so it only needs to be set if it changes. */ static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg) { u8 bank = reg >> 8; if (data->bank != bank) { outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET); outb_p(bank, data->addr + DATA_REG_OFFSET); data->bank = bank; } } static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg) { int res, word_sized = is_word_sized(reg); mutex_lock(&data->lock); w83627ehf_set_bank(data, reg); outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); res = inb_p(data->addr + DATA_REG_OFFSET); if (word_sized) { outb_p((reg & 0xff) + 1, data->addr + ADDR_REG_OFFSET); res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET); } mutex_unlock(&data->lock); return res; } static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value) { int word_sized = is_word_sized(reg); mutex_lock(&data->lock); w83627ehf_set_bank(data, reg); outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); if (word_sized) { outb_p(value >> 8, data->addr + DATA_REG_OFFSET); outb_p((reg & 0xff) + 1, data->addr + ADDR_REG_OFFSET); } outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); mutex_unlock(&data->lock); return 0; } /* We left-align 8-bit temperature values to make the code simpler */ static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg) { u16 res; res = w83627ehf_read_value(data, reg); if (!is_word_sized(reg)) res <<= 8; return res; } static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg, u16 value) { if (!is_word_sized(reg)) value >>= 8; return w83627ehf_write_value(data, reg, value); } /* This function assumes that the caller holds data->update_lock */ static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr) { u8 reg; switch (nr) { case 0: reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x70) | (data->fan_div[0] & 0x7); w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg); break; case 1: reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x7) | ((data->fan_div[1] << 4) & 0x70); w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg); case 2: reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x70) | (data->fan_div[2] & 0x7); w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg); break; case 3: reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x7) | ((data->fan_div[3] << 4) & 0x70); w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg); break; } } /* This function assumes that the caller holds data->update_lock */ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) { u8 reg; switch (nr) { case 0: reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf) | ((data->fan_div[0] & 0x03) << 4); /* fan5 input control bit is write only, compute the value */ reg |= (data->has_fan & (1 << 4)) ? 1 : 0; w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf) | ((data->fan_div[0] & 0x04) << 3); w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 1: reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f) | ((data->fan_div[1] & 0x03) << 6); /* fan5 input control bit is write only, compute the value */ reg |= (data->has_fan & (1 << 4)) ? 1 : 0; w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf) | ((data->fan_div[1] & 0x04) << 4); w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 2: reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f) | ((data->fan_div[2] & 0x03) << 6); w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg); reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f) | ((data->fan_div[2] & 0x04) << 5); w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 3: reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc) | (data->fan_div[3] & 0x03); w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f) | ((data->fan_div[3] & 0x04) << 5); w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg); break; case 4: reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73) | ((data->fan_div[4] & 0x03) << 2) | ((data->fan_div[4] & 0x04) << 5); w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); break; } } static void w83627ehf_write_fan_div_common(struct device *dev, struct w83627ehf_data *data, int nr) { struct w83627ehf_sio_data *sio_data = dev->platform_data; if (sio_data->kind == nct6776) ; /* no dividers, do nothing */ else if (sio_data->kind == nct6775) nct6775_write_fan_div(data, nr); else w83627ehf_write_fan_div(data, nr); } static void nct6775_update_fan_div(struct w83627ehf_data *data) { u8 i; i = w83627ehf_read_value(data, NCT6775_REG_FANDIV1); data->fan_div[0] = i & 0x7; data->fan_div[1] = (i & 0x70) >> 4; i = w83627ehf_read_value(data, NCT6775_REG_FANDIV2); data->fan_div[2] = i & 0x7; if (data->has_fan & (1<<3)) data->fan_div[3] = (i & 0x70) >> 4; } static void w83627ehf_update_fan_div(struct w83627ehf_data *data) { int i; i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = (i >> 6) & 0x03; i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2); data->fan_div[2] = (i >> 6) & 0x03; i = w83627ehf_read_value(data, W83627EHF_REG_VBAT); data->fan_div[0] |= (i >> 3) & 0x04; data->fan_div[1] |= (i >> 4) & 0x04; data->fan_div[2] |= (i >> 5) & 0x04; if (data->has_fan & ((1 << 3) | (1 << 4))) { i = w83627ehf_read_value(data, W83627EHF_REG_DIODE); data->fan_div[3] = i & 0x03; data->fan_div[4] = ((i >> 2) & 0x03) | ((i >> 5) & 0x04); } if (data->has_fan & (1 << 3)) { i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT); data->fan_div[3] |= (i >> 5) & 0x04; } } static void w83627ehf_update_fan_div_common(struct device *dev, struct w83627ehf_data *data) { struct w83627ehf_sio_data *sio_data = dev->platform_data; if (sio_data->kind == nct6776) ; /* no dividers, do nothing */ else if (sio_data->kind == nct6775) nct6775_update_fan_div(data); else w83627ehf_update_fan_div(data); } static void nct6775_update_pwm(struct w83627ehf_data *data) { int i; int pwmcfg, fanmodecfg; for (i = 0; i < data->pwm_num; i++) { pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]); fanmodecfg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[i]); data->pwm_mode[i] = ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; data->pwm_enable[i] = ((fanmodecfg >> 4) & 7) + 1; data->tolerance[i] = fanmodecfg & 0x0f; data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]); } } static void w83627ehf_update_pwm(struct w83627ehf_data *data) { int i; int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ for (i = 0; i < data->pwm_num; i++) { if (!(data->has_fan & (1 << i))) continue; /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i != 1) { pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]); tolerance = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[i]); } data->pwm_mode[i] = ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) & 3) + 1; data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]); data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f; } } static void w83627ehf_update_pwm_common(struct device *dev, struct w83627ehf_data *data) { struct w83627ehf_sio_data *sio_data = dev->platform_data; if (sio_data->kind == nct6775 || sio_data->kind == nct6776) nct6775_update_pwm(data); else w83627ehf_update_pwm(data); } static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct w83627ehf_sio_data *sio_data = dev->platform_data; int i; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ/2) || !data->valid) { /* Fan clock dividers */ w83627ehf_update_fan_div_common(dev, data); /* Measured voltages and limits */ for (i = 0; i < data->in_num; i++) { if ((i == 6) && data->in6_skip) continue; data->in[i] = w83627ehf_read_value(data, W83627EHF_REG_IN(i)); data->in_min[i] = w83627ehf_read_value(data, W83627EHF_REG_IN_MIN(i)); data->in_max[i] = w83627ehf_read_value(data, W83627EHF_REG_IN_MAX(i)); } /* Measured fan speeds and limits */ for (i = 0; i < 5; i++) { u16 reg; if (!(data->has_fan & (1 << i))) continue; reg = w83627ehf_read_value(data, data->REG_FAN[i]); data->rpm[i] = data->fan_from_reg(reg, data->fan_div[i]); if (data->has_fan_min & (1 << i)) data->fan_min[i] = w83627ehf_read_value(data, data->REG_FAN_MIN[i]); /* If we failed to measure the fan speed and clock divider can be increased, let's try that for next time */ if (data->has_fan_div && (reg >= 0xff || (sio_data->kind == nct6775 && reg == 0x00)) && data->fan_div[i] < 0x07) { dev_dbg(dev, "Increasing fan%d " "clock divider from %u to %u\n", i + 1, div_from_reg(data->fan_div[i]), div_from_reg(data->fan_div[i] + 1)); data->fan_div[i]++; w83627ehf_write_fan_div_common(dev, data, i); /* Preserve min limit if possible */ if ((data->has_fan_min & (1 << i)) && data->fan_min[i] >= 2 && data->fan_min[i] != 255) w83627ehf_write_value(data, data->REG_FAN_MIN[i], (data->fan_min[i] /= 2)); } } w83627ehf_update_pwm_common(dev, data); for (i = 0; i < data->pwm_num; i++) { if (!(data->has_fan & (1 << i))) continue; data->fan_start_output[i] = w83627ehf_read_value(data, data->REG_FAN_START_OUTPUT[i]); data->fan_stop_output[i] = w83627ehf_read_value(data, data->REG_FAN_STOP_OUTPUT[i]); data->fan_stop_time[i] = w83627ehf_read_value(data, data->REG_FAN_STOP_TIME[i]); if (data->REG_FAN_MAX_OUTPUT && data->REG_FAN_MAX_OUTPUT[i] != 0xff) data->fan_max_output[i] = w83627ehf_read_value(data, data->REG_FAN_MAX_OUTPUT[i]); if (data->REG_FAN_STEP_OUTPUT && data->REG_FAN_STEP_OUTPUT[i] != 0xff) data->fan_step_output[i] = w83627ehf_read_value(data, data->REG_FAN_STEP_OUTPUT[i]); data->target_temp[i] = w83627ehf_read_value(data, data->REG_TARGET[i]) & (data->pwm_mode[i] == 1 ? 0x7f : 0xff); } /* Measured temperatures and limits */ for (i = 0; i < NUM_REG_TEMP; i++) { if (!(data->have_temp & (1 << i))) continue; data->temp[i] = w83627ehf_read_temp(data, data->reg_temp[i]); if (data->reg_temp_over[i]) data->temp_max[i] = w83627ehf_read_temp(data, data->reg_temp_over[i]); if (data->reg_temp_hyst[i]) data->temp_max_hyst[i] = w83627ehf_read_temp(data, data->reg_temp_hyst[i]); } data->alarms = w83627ehf_read_value(data, W83627EHF_REG_ALARM1) | (w83627ehf_read_value(data, W83627EHF_REG_ALARM2) << 8) | (w83627ehf_read_value(data, W83627EHF_REG_ALARM3) << 16); data->caseopen = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_DET); data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } /* * Sysfs callback functions */ #define show_in_reg(reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \ } show_in_reg(in) show_in_reg(in_min) show_in_reg(in_max) #define store_in_reg(REG, reg) \ static ssize_t \ store_in_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ unsigned long val; \ int err; \ err = strict_strtoul(buf, 10, &val); \ if (err < 0) \ return err; \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = in_to_reg(val, nr); \ w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ } store_in_reg(MIN, min) store_in_reg(MAX, max) static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%u\n", (data->alarms >> nr) & 0x01); } static struct sensor_device_attribute sda_in_input[] = { SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9), }; static struct sensor_device_attribute sda_in_alarm[] = { SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0), SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1), SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2), SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3), SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8), SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 21), SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 20), SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16), SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17), SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 19), }; static struct sensor_device_attribute sda_in_min[] = { SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9), }; static struct sensor_device_attribute sda_in_max[] = { SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), }; static ssize_t show_fan(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%d\n", data->rpm[nr]); } static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%d\n", data->fan_from_reg_min(data->fan_min[nr], data->fan_div[nr])); } static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr])); } static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; unsigned long val; int err; unsigned int reg; u8 new_div; err = strict_strtoul(buf, 10, &val); if (err < 0) return err; mutex_lock(&data->update_lock); if (!data->has_fan_div) { /* * Only NCT6776F for now, so we know that this is a 13 bit * register */ if (!val) { val = 0xff1f; } else { if (val > 1350000U) val = 135000U; val = 1350000U / val; val = (val & 0x1f) | ((val << 3) & 0xff00); } data->fan_min[nr] = val; goto done; /* Leave fan divider alone */ } if (!val) { /* No min limit, alarm disabled */ data->fan_min[nr] = 255; new_div = data->fan_div[nr]; /* No change */ dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1); } else if ((reg = 1350000U / val) >= 128 * 255) { /* Speed below this value cannot possibly be represented, even with the highest divider (128) */ data->fan_min[nr] = 254; new_div = 7; /* 128 == (1 << 7) */ dev_warn(dev, "fan%u low limit %lu below minimum %u, set to " "minimum\n", nr + 1, val, data->fan_from_reg_min(254, 7)); } else if (!reg) { /* Speed above this value cannot possibly be represented, even with the lowest divider (1) */ data->fan_min[nr] = 1; new_div = 0; /* 1 == (1 << 0) */ dev_warn(dev, "fan%u low limit %lu above maximum %u, set to " "maximum\n", nr + 1, val, data->fan_from_reg_min(1, 0)); } else { /* Automatically pick the best divider, i.e. the one such that the min limit will correspond to a register value in the 96..192 range */ new_div = 0; while (reg > 192 && new_div < 7) { reg >>= 1; new_div++; } data->fan_min[nr] = reg; } /* Write both the fan clock divider (if it changed) and the new fan min (unconditionally) */ if (new_div != data->fan_div[nr]) { dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", nr + 1, div_from_reg(data->fan_div[nr]), div_from_reg(new_div)); data->fan_div[nr] = new_div; w83627ehf_write_fan_div_common(dev, data, nr); /* Give the chip time to sample a new speed value */ data->last_updated = jiffies; } done: w83627ehf_write_value(data, data->REG_FAN_MIN[nr], data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute sda_fan_input[] = { SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4), }; static struct sensor_device_attribute sda_fan_alarm[] = { SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6), SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7), SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11), SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 10), SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 23), }; static struct sensor_device_attribute sda_fan_min[] = { SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 0), SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1), SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 2), SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 3), SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 4), }; static struct sensor_device_attribute sda_fan_div[] = { SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0), SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1), SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2), SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3), SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4), }; static ssize_t show_temp_label(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]); } #define show_temp_reg(addr, reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->reg[nr])); \ } show_temp_reg(reg_temp, temp); show_temp_reg(reg_temp_over, temp_max); show_temp_reg(reg_temp_hyst, temp_max_hyst); #define store_temp_reg(addr, reg) \ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ int err; \ long val; \ err = strict_strtol(buf, 10, &val); \ if (err < 0) \ return err; \ mutex_lock(&data->update_lock); \ data->reg[nr] = LM75_TEMP_TO_REG(val); \ w83627ehf_write_temp(data, data->addr[nr], data->reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ } store_temp_reg(reg_temp_over, temp_max); store_temp_reg(reg_temp_hyst, temp_max_hyst); static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; return sprintf(buf, "%d\n", (int)data->temp_type[nr]); } static struct sensor_device_attribute sda_temp_input[] = { SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0), SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1), SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2), SENSOR_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3), SENSOR_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4), SENSOR_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5), SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6), SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7), SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8), }; static struct sensor_device_attribute sda_temp_label[] = { SENSOR_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0), SENSOR_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1), SENSOR_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2), SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3), SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4), SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5), SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6), SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7), SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8), }; static struct sensor_device_attribute sda_temp_max[] = { SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 0), SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 1), SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 2), SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 3), SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 4), SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 5), SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 6), SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 7), SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max, store_temp_max, 8), }; static struct sensor_device_attribute sda_temp_max_hyst[] = { SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 0), SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 1), SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 2), SENSOR_ATTR(temp4_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 3), SENSOR_ATTR(temp5_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 4), SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 5), SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 6), SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 7), SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst, store_temp_max_hyst, 8), }; static struct sensor_device_attribute sda_temp_alarm[] = { SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4), SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5), SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), }; static struct sensor_device_attribute sda_temp_type[] = { SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0), SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1), SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2), }; #define show_pwm_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", data->reg[nr]); \ } show_pwm_reg(pwm_mode) show_pwm_reg(pwm_enable) show_pwm_reg(pwm) static ssize_t store_pwm_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; unsigned long val; int err; u16 reg; err = strict_strtoul(buf, 10, &val); if (err < 0) return err; if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); data->pwm_mode[nr] = val; reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]); if (!val) reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr]; w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg); mutex_unlock(&data->update_lock); return count; } static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; unsigned long val; int err; err = strict_strtoul(buf, 10, &val); if (err < 0) return err; val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); data->pwm[nr] = val; w83627ehf_write_value(data, data->REG_PWM[nr], val); mutex_unlock(&data->update_lock); return count; } static ssize_t store_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct w83627ehf_sio_data *sio_data = dev->platform_data; struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; unsigned long val; int err; u16 reg; err = strict_strtoul(buf, 10, &val); if (err < 0) return err; if (!val || (val > 4 && val != data->pwm_enable_orig[nr])) return -EINVAL; /* SmartFan III mode is not supported on NCT6776F */ if (sio_data->kind == nct6776 && val == 4) return -EINVAL; mutex_lock(&data->update_lock); data->pwm_enable[nr] = val; if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]); reg &= 0x0f; reg |= (val - 1) << 4; w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg); } else { reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]); reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr]; w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg); } mutex_unlock(&data->update_lock); return count; } #define show_tol_temp(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", data->reg[nr] * 1000); \ } show_tol_temp(tolerance) show_tol_temp(target_temp) static ssize_t store_target_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; long val; int err; err = strict_strtol(buf, 10, &val); if (err < 0) return err; val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 127); mutex_lock(&data->update_lock); data->target_temp[nr] = val; w83627ehf_write_value(data, data->REG_TARGET[nr], val); mutex_unlock(&data->update_lock); return count; } static ssize_t store_tolerance(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); struct w83627ehf_sio_data *sio_data = dev->platform_data; struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u16 reg; long val; int err; err = strict_strtol(buf, 10, &val); if (err < 0) return err; /* Limit the temp to 0C - 15C */ val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 15); mutex_lock(&data->update_lock); if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { /* Limit tolerance further for NCT6776F */ if (sio_data->kind == nct6776 && val > 7) val = 7; reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]); reg = (reg & 0xf0) | val; w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg); } else { reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); if (nr == 1) reg = (reg & 0x0f) | (val << 4); else reg = (reg & 0xf0) | val; w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); } data->tolerance[nr] = val; mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute sda_pwm[] = { SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2), SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3), }; static struct sensor_device_attribute sda_pwm_mode[] = { SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 0), SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 1), SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 2), SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 3), }; static struct sensor_device_attribute sda_pwm_enable[] = { SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 0), SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 1), SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 2), SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 3), }; static struct sensor_device_attribute sda_target_temp[] = { SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp, store_target_temp, 0), SENSOR_ATTR(pwm2_target, S_IWUSR | S_IRUGO, show_target_temp, store_target_temp, 1), SENSOR_ATTR(pwm3_target, S_IWUSR | S_IRUGO, show_target_temp, store_target_temp, 2), SENSOR_ATTR(pwm4_target, S_IWUSR | S_IRUGO, show_target_temp, store_target_temp, 3), }; static struct sensor_device_attribute sda_tolerance[] = { SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 0), SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 1), SENSOR_ATTR(pwm3_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 2), SENSOR_ATTR(pwm4_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 3), }; /* Smart Fan registers */ #define fan_functions(reg, REG) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", data->reg[nr]); \ } \ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ unsigned long val; \ int err; \ err = strict_strtoul(buf, 10, &val); \ if (err < 0) \ return err; \ val = SENSORS_LIMIT(val, 1, 255); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ w83627ehf_write_value(data, data->REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } fan_functions(fan_start_output, FAN_START_OUTPUT) fan_functions(fan_stop_output, FAN_STOP_OUTPUT) fan_functions(fan_max_output, FAN_MAX_OUTPUT) fan_functions(fan_step_output, FAN_STEP_OUTPUT) #define fan_time_functions(reg, REG) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83627ehf_data *data = w83627ehf_update_device(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ return sprintf(buf, "%d\n", \ step_time_from_reg(data->reg[nr], \ data->pwm_mode[nr])); \ } \ \ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = \ to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ unsigned long val; \ int err; \ err = strict_strtoul(buf, 10, &val); \ if (err < 0) \ return err; \ val = step_time_to_reg(val, data->pwm_mode[nr]); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } \ fan_time_functions(fan_stop_time, FAN_STOP_TIME) static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = dev_get_drvdata(dev); return sprintf(buf, "%s\n", data->name); } static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static struct sensor_device_attribute sda_sf3_arrays_fan4[] = { SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 3), SENSOR_ATTR(pwm4_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, store_fan_start_output, 3), SENSOR_ATTR(pwm4_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, store_fan_stop_output, 3), SENSOR_ATTR(pwm4_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, store_fan_max_output, 3), SENSOR_ATTR(pwm4_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, store_fan_step_output, 3), }; static struct sensor_device_attribute sda_sf3_arrays[] = { SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 0), SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 1), SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 2), SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, store_fan_start_output, 0), SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, store_fan_start_output, 1), SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, store_fan_start_output, 2), SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, store_fan_stop_output, 0), SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, store_fan_stop_output, 1), SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, store_fan_stop_output, 2), }; /* * pwm1 and pwm3 don't support max and step settings on all chips. * Need to check support while generating/removing attribute files. */ static struct sensor_device_attribute sda_sf3_max_step_arrays[] = { SENSOR_ATTR(pwm1_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, store_fan_max_output, 0), SENSOR_ATTR(pwm1_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, store_fan_step_output, 0), SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, store_fan_max_output, 1), SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, store_fan_step_output, 1), SENSOR_ATTR(pwm3_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, store_fan_max_output, 2), SENSOR_ATTR(pwm3_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, store_fan_step_output, 2), }; static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); /* Case open detection */ static ssize_t show_caseopen(struct device *dev, struct device_attribute *attr, char *buf) { struct w83627ehf_data *data = w83627ehf_update_device(dev); return sprintf(buf, "%d\n", !!(data->caseopen & to_sensor_dev_attr_2(attr)->index)); } static ssize_t clear_caseopen(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83627ehf_data *data = dev_get_drvdata(dev); unsigned long val; u16 reg, mask; if (strict_strtoul(buf, 10, &val) || val != 0) return -EINVAL; mask = to_sensor_dev_attr_2(attr)->nr; mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR); w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask); w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask); data->valid = 0; /* Force cache refresh */ mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute_2 sda_caseopen[] = { SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen, clear_caseopen, 0x80, 0x10), SENSOR_ATTR_2(intrusion1_alarm, S_IWUSR | S_IRUGO, show_caseopen, clear_caseopen, 0x40, 0x40), }; /* * Driver and device management */ static void w83627ehf_device_remove_files(struct device *dev) { /* some entries in the following arrays may not have been used in * device_create_file(), but device_remove_file() will ignore them */ int i; struct w83627ehf_data *data = dev_get_drvdata(dev); for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) device_remove_file(dev, &sda_sf3_arrays[i].dev_attr); for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) { struct sensor_device_attribute *attr = &sda_sf3_max_step_arrays[i]; if (data->REG_FAN_STEP_OUTPUT && data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) device_remove_file(dev, &attr->dev_attr); } for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); for (i = 0; i < data->in_num; i++) { if ((i == 6) && data->in6_skip) continue; device_remove_file(dev, &sda_in_input[i].dev_attr); device_remove_file(dev, &sda_in_alarm[i].dev_attr); device_remove_file(dev, &sda_in_min[i].dev_attr); device_remove_file(dev, &sda_in_max[i].dev_attr); } for (i = 0; i < 5; i++) { device_remove_file(dev, &sda_fan_input[i].dev_attr); device_remove_file(dev, &sda_fan_alarm[i].dev_attr); device_remove_file(dev, &sda_fan_div[i].dev_attr); device_remove_file(dev, &sda_fan_min[i].dev_attr); } for (i = 0; i < data->pwm_num; i++) { device_remove_file(dev, &sda_pwm[i].dev_attr); device_remove_file(dev, &sda_pwm_mode[i].dev_attr); device_remove_file(dev, &sda_pwm_enable[i].dev_attr); device_remove_file(dev, &sda_target_temp[i].dev_attr); device_remove_file(dev, &sda_tolerance[i].dev_attr); } for (i = 0; i < NUM_REG_TEMP; i++) { if (!(data->have_temp & (1 << i))) continue; device_remove_file(dev, &sda_temp_input[i].dev_attr); device_remove_file(dev, &sda_temp_label[i].dev_attr); device_remove_file(dev, &sda_temp_max[i].dev_attr); device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr); if (i > 2) continue; device_remove_file(dev, &sda_temp_alarm[i].dev_attr); device_remove_file(dev, &sda_temp_type[i].dev_attr); } device_remove_file(dev, &sda_caseopen[0].dev_attr); device_remove_file(dev, &sda_caseopen[1].dev_attr); device_remove_file(dev, &dev_attr_name); device_remove_file(dev, &dev_attr_cpu0_vid); } /* Get the monitoring functions started */ static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data, enum kinds kind) { int i; u8 tmp, diode; /* Start monitoring is needed */ tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG); if (!(tmp & 0x01)) w83627ehf_write_value(data, W83627EHF_REG_CONFIG, tmp | 0x01); /* Enable temperature sensors if needed */ for (i = 0; i < NUM_REG_TEMP; i++) { if (!(data->have_temp & (1 << i))) continue; if (!data->reg_temp_config[i]) continue; tmp = w83627ehf_read_value(data, data->reg_temp_config[i]); if (tmp & 0x01) w83627ehf_write_value(data, data->reg_temp_config[i], tmp & 0xfe); } /* Enable VBAT monitoring if needed */ tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT); if (!(tmp & 0x01)) w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01); /* Get thermal sensor types */ switch (kind) { case w83627ehf: diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE); break; default: diode = 0x70; } for (i = 0; i < 3; i++) { const char *label = data->temp_label[data->temp_src[i]]; /* Digital source overrides analog type */ if (strncmp(label, "PECI", 4) == 0) data->temp_type[i] = 6; else if (strncmp(label, "AMD", 3) == 0) data->temp_type[i] = 5; else if ((tmp & (0x02 << i))) data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3; else data->temp_type[i] = 4; /* thermistor */ } } static void w82627ehf_swap_tempreg(struct w83627ehf_data *data, int r1, int r2) { u16 tmp; tmp = data->temp_src[r1]; data->temp_src[r1] = data->temp_src[r2]; data->temp_src[r2] = tmp; tmp = data->reg_temp[r1]; data->reg_temp[r1] = data->reg_temp[r2]; data->reg_temp[r2] = tmp; tmp = data->reg_temp_over[r1]; data->reg_temp_over[r1] = data->reg_temp_over[r2]; data->reg_temp_over[r2] = tmp; tmp = data->reg_temp_hyst[r1]; data->reg_temp_hyst[r1] = data->reg_temp_hyst[r2]; data->reg_temp_hyst[r2] = tmp; tmp = data->reg_temp_config[r1]; data->reg_temp_config[r1] = data->reg_temp_config[r2]; data->reg_temp_config[r2] = tmp; } static void __devinit w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp) { int i; for (i = 0; i < n_temp; i++) { data->reg_temp[i] = W83627EHF_REG_TEMP[i]; data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i]; data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i]; data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i]; } } static void __devinit w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, struct w83627ehf_data *data) { int fan3pin, fan4pin, fan4min, fan5pin, regval; superio_enter(sio_data->sioreg); /* fan4 and fan5 share some pins with the GPIO and serial flash */ if (sio_data->kind == nct6775) { /* On NCT6775, fan4 shares pins with the fdc interface */ fan3pin = 1; fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80); fan4min = 0; fan5pin = 0; } else if (sio_data->kind == nct6776) { fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40); fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01); fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02); fan4min = fan4pin; } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { fan3pin = 1; fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40; fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20; fan4min = fan4pin; } else { fan3pin = 1; fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06); fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02); fan4min = fan4pin; } superio_exit(sio_data->sioreg); data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */ data->has_fan |= (fan3pin << 2); data->has_fan_min |= (fan3pin << 2); if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { /* * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 * register */ data->has_fan |= (fan4pin << 3) | (fan5pin << 4); data->has_fan_min |= (fan4min << 3) | (fan5pin << 4); } else { /* * It looks like fan4 and fan5 pins can be alternatively used * as fan on/off switches, but fan5 control is write only :/ * We assume that if the serial interface is disabled, designers * connected fan5 as input unless they are emitting log 1, which * is not the default. */ regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); if ((regval & (1 << 2)) && fan4pin) { data->has_fan |= (1 << 3); data->has_fan_min |= (1 << 3); } if (!(regval & (1 << 1)) && fan5pin) { data->has_fan |= (1 << 4); data->has_fan_min |= (1 << 4); } } } static int __devinit w83627ehf_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct w83627ehf_sio_data *sio_data = dev->platform_data; struct w83627ehf_data *data; struct resource *res; u8 en_vrm10; int i, err = 0; res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) { err = -EBUSY; dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", (unsigned long)res->start, (unsigned long)res->start + IOREGION_LENGTH - 1); goto exit; } data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit_release; } data->addr = res->start; mutex_init(&data->lock); mutex_init(&data->update_lock); data->name = w83627ehf_device_names[sio_data->kind]; platform_set_drvdata(pdev, data); /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9; /* 667HG, NCT6775F, and NCT6776F have 3 pwms */ data->pwm_num = (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b || sio_data->kind == nct6775 || sio_data->kind == nct6776) ? 3 : 4; /* Default to 3 temperature inputs, code below will adjust as needed */ data->have_temp = 0x07; /* Deal with temperature register setup first. */ if (sio_data->kind == nct6775 || sio_data->kind == nct6776) { int mask = 0; /* * Display temperature sensor output only if it monitors * a source other than one already reported. Always display * first three temperature registers, though. */ for (i = 0; i < NUM_REG_TEMP; i++) { u8 src; data->reg_temp[i] = NCT6775_REG_TEMP[i]; data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i]; data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i]; data->reg_temp_config[i] = NCT6775_REG_TEMP_CONFIG[i]; src = w83627ehf_read_value(data, NCT6775_REG_TEMP_SOURCE[i]); src &= 0x1f; if (src && !(mask & (1 << src))) { data->have_temp |= 1 << i; mask |= 1 << src; } data->temp_src[i] = src; /* * Now do some register swapping if index 0..2 don't * point to SYSTIN(1), CPUIN(2), and AUXIN(3). * Idea is to have the first three attributes * report SYSTIN, CPUIN, and AUXIN if possible * without overriding the basic system configuration. */ if (i > 0 && data->temp_src[0] != 1 && data->temp_src[i] == 1) w82627ehf_swap_tempreg(data, 0, i); if (i > 1 && data->temp_src[1] != 2 && data->temp_src[i] == 2) w82627ehf_swap_tempreg(data, 1, i); if (i > 2 && data->temp_src[2] != 3 && data->temp_src[i] == 3) w82627ehf_swap_tempreg(data, 2, i); } if (sio_data->kind == nct6776) { /* * On NCT6776, AUXTIN and VIN3 pins are shared. * Only way to detect it is to check if AUXTIN is used * as a temperature source, and if that source is * enabled. * * If that is the case, disable in6, which reports VIN3. * Otherwise disable temp3. */ if (data->temp_src[2] == 3) { u8 reg; if (data->reg_temp_config[2]) reg = w83627ehf_read_value(data, data->reg_temp_config[2]); else reg = 0; /* Assume AUXTIN is used */ if (reg & 0x01) data->have_temp &= ~(1 << 2); else data->in6_skip = 1; } data->temp_label = nct6776_temp_label; } else { data->temp_label = nct6775_temp_label; } } else if (sio_data->kind == w83667hg_b) { u8 reg; w83627ehf_set_temp_reg_ehf(data, 4); /* * Temperature sources are selected with bank 0, registers 0x49 * and 0x4a. */ reg = w83627ehf_read_value(data, 0x4a); data->temp_src[0] = reg >> 5; reg = w83627ehf_read_value(data, 0x49); data->temp_src[1] = reg & 0x07; data->temp_src[2] = (reg >> 4) & 0x07; /* * W83667HG-B has another temperature register at 0x7e. * The temperature source is selected with register 0x7d. * Support it if the source differs from already reported * sources. */ reg = w83627ehf_read_value(data, 0x7d); reg &= 0x07; if (reg != data->temp_src[0] && reg != data->temp_src[1] && reg != data->temp_src[2]) { data->temp_src[3] = reg; data->have_temp |= 1 << 3; } /* * Chip supports either AUXTIN or VIN3. Try to find out which * one. */ reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]); if (data->temp_src[2] == 2 && (reg & 0x01)) data->have_temp &= ~(1 << 2); if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2))) || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3)))) data->in6_skip = 1; data->temp_label = w83667hg_b_temp_label; } else { w83627ehf_set_temp_reg_ehf(data, 3); /* Temperature sources are fixed */ if (sio_data->kind == w83667hg) { u8 reg; /* * Chip supports either AUXTIN or VIN3. Try to find * out which one. */ reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]); if (reg & 0x01) data->have_temp &= ~(1 << 2); else data->in6_skip = 1; } } if (sio_data->kind == nct6775) { data->has_fan_div = true; data->fan_from_reg = fan_from_reg16; data->fan_from_reg_min = fan_from_reg8; data->REG_PWM = NCT6775_REG_PWM; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6775_REG_FAN; data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT; data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME; data->REG_FAN_MAX_OUTPUT = NCT6775_REG_FAN_MAX_OUTPUT; data->REG_FAN_STEP_OUTPUT = NCT6775_REG_FAN_STEP_OUTPUT; } else if (sio_data->kind == nct6776) { data->has_fan_div = false; data->fan_from_reg = fan_from_reg13; data->fan_from_reg_min = fan_from_reg13; data->REG_PWM = NCT6775_REG_PWM; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6775_REG_FAN; data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT; data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME; } else if (sio_data->kind == w83667hg_b) { data->has_fan_div = true; data->fan_from_reg = fan_from_reg8; data->fan_from_reg_min = fan_from_reg8; data->REG_PWM = W83627EHF_REG_PWM; data->REG_TARGET = W83627EHF_REG_TARGET; data->REG_FAN = W83627EHF_REG_FAN; data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT; data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT; data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME; data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B; data->REG_FAN_STEP_OUTPUT = W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B; } else { data->has_fan_div = true; data->fan_from_reg = fan_from_reg8; data->fan_from_reg_min = fan_from_reg8; data->REG_PWM = W83627EHF_REG_PWM; data->REG_TARGET = W83627EHF_REG_TARGET; data->REG_FAN = W83627EHF_REG_FAN; data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT; data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT; data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME; data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT_COMMON; data->REG_FAN_STEP_OUTPUT = W83627EHF_REG_FAN_STEP_OUTPUT_COMMON; } /* Initialize the chip */ w83627ehf_init_device(data, sio_data->kind); data->vrm = vid_which_vrm(); superio_enter(sio_data->sioreg); /* Read VID value */ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b || sio_data->kind == nct6775 || sio_data->kind == nct6776) { /* W83667HG has different pins for VID input and output, so we can get the VID input values directly at logical device D 0xe3. */ superio_select(sio_data->sioreg, W83667HG_LD_VID); data->vid = superio_inb(sio_data->sioreg, 0xe3); err = device_create_file(dev, &dev_attr_cpu0_vid); if (err) goto exit_release; } else { superio_select(sio_data->sioreg, W83627EHF_LD_HWM); if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) { /* Set VID input sensibility if needed. In theory the BIOS should have set it, but in practice it's not always the case. We only do it for the W83627EHF/EHG because the W83627DHG is more complex in this respect. */ if (sio_data->kind == w83627ehf) { en_vrm10 = superio_inb(sio_data->sioreg, SIO_REG_EN_VRM10); if ((en_vrm10 & 0x08) && data->vrm == 90) { dev_warn(dev, "Setting VID input " "voltage to TTL\n"); superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10, en_vrm10 & ~0x08); } else if (!(en_vrm10 & 0x08) && data->vrm == 100) { dev_warn(dev, "Setting VID input " "voltage to VRM10\n"); superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10, en_vrm10 | 0x08); } } data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA); if (sio_data->kind == w83627ehf) /* 6 VID pins only */ data->vid &= 0x3f; err = device_create_file(dev, &dev_attr_cpu0_vid); if (err) goto exit_release; } else { dev_info(dev, "VID pins in output mode, CPU VID not " "available\n"); } } if (fan_debounce && (sio_data->kind == nct6775 || sio_data->kind == nct6776)) { u8 tmp; superio_select(sio_data->sioreg, W83627EHF_LD_HWM); tmp = superio_inb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE); if (sio_data->kind == nct6776) superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE, 0x3e | tmp); else superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE, 0x1e | tmp); pr_info("Enabled fan debounce for chip %s\n", data->name); } superio_exit(sio_data->sioreg); w83627ehf_check_fan_inputs(sio_data, data); /* Read fan clock dividers immediately */ w83627ehf_update_fan_div_common(dev, data); /* Read pwm data to save original values */ w83627ehf_update_pwm_common(dev, data); for (i = 0; i < data->pwm_num; i++) data->pwm_enable_orig[i] = data->pwm_enable[i]; /* Read pwm data to save original values */ w83627ehf_update_pwm_common(dev, data); for (i = 0; i < data->pwm_num; i++) data->pwm_enable_orig[i] = data->pwm_enable[i]; /* Register sysfs hooks */ for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) { err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr); if (err) goto exit_remove; } for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) { struct sensor_device_attribute *attr = &sda_sf3_max_step_arrays[i]; if (data->REG_FAN_STEP_OUTPUT && data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) { err = device_create_file(dev, &attr->dev_attr); if (err) goto exit_remove; } } /* if fan4 is enabled create the sf3 files for it */ if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4) for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) { err = device_create_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); if (err) goto exit_remove; } for (i = 0; i < data->in_num; i++) { if ((i == 6) && data->in6_skip) continue; if ((err = device_create_file(dev, &sda_in_input[i].dev_attr)) || (err = device_create_file(dev, &sda_in_alarm[i].dev_attr)) || (err = device_create_file(dev, &sda_in_min[i].dev_attr)) || (err = device_create_file(dev, &sda_in_max[i].dev_attr))) goto exit_remove; } for (i = 0; i < 5; i++) { if (data->has_fan & (1 << i)) { if ((err = device_create_file(dev, &sda_fan_input[i].dev_attr)) || (err = device_create_file(dev, &sda_fan_alarm[i].dev_attr))) goto exit_remove; if (sio_data->kind != nct6776) { err = device_create_file(dev, &sda_fan_div[i].dev_attr); if (err) goto exit_remove; } if (data->has_fan_min & (1 << i)) { err = device_create_file(dev, &sda_fan_min[i].dev_attr); if (err) goto exit_remove; } if (i < data->pwm_num && ((err = device_create_file(dev, &sda_pwm[i].dev_attr)) || (err = device_create_file(dev, &sda_pwm_mode[i].dev_attr)) || (err = device_create_file(dev, &sda_pwm_enable[i].dev_attr)) || (err = device_create_file(dev, &sda_target_temp[i].dev_attr)) || (err = device_create_file(dev, &sda_tolerance[i].dev_attr)))) goto exit_remove; } } for (i = 0; i < NUM_REG_TEMP; i++) { if (!(data->have_temp & (1 << i))) continue; err = device_create_file(dev, &sda_temp_input[i].dev_attr); if (err) goto exit_remove; if (data->temp_label) { err = device_create_file(dev, &sda_temp_label[i].dev_attr); if (err) goto exit_remove; } if (data->reg_temp_over[i]) { err = device_create_file(dev, &sda_temp_max[i].dev_attr); if (err) goto exit_remove; } if (data->reg_temp_hyst[i]) { err = device_create_file(dev, &sda_temp_max_hyst[i].dev_attr); if (err) goto exit_remove; } if (i > 2) continue; if ((err = device_create_file(dev, &sda_temp_alarm[i].dev_attr)) || (err = device_create_file(dev, &sda_temp_type[i].dev_attr))) goto exit_remove; } err = device_create_file(dev, &sda_caseopen[0].dev_attr); if (err) goto exit_remove; if (sio_data->kind == nct6776) { err = device_create_file(dev, &sda_caseopen[1].dev_attr); if (err) goto exit_remove; } err = device_create_file(dev, &dev_attr_name); if (err) goto exit_remove; data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove; } return 0; exit_remove: w83627ehf_device_remove_files(dev); kfree(data); platform_set_drvdata(pdev, NULL); exit_release: release_region(res->start, IOREGION_LENGTH); exit: return err; } static int __devexit w83627ehf_remove(struct platform_device *pdev) { struct w83627ehf_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->hwmon_dev); w83627ehf_device_remove_files(&pdev->dev); release_region(data->addr, IOREGION_LENGTH); platform_set_drvdata(pdev, NULL); kfree(data); return 0; } static struct platform_driver w83627ehf_driver = { .driver = { .owner = THIS_MODULE, .name = DRVNAME, }, .probe = w83627ehf_probe, .remove = __devexit_p(w83627ehf_remove), }; /* w83627ehf_find() looks for a '627 in the Super-I/O config space */ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, struct w83627ehf_sio_data *sio_data) { static const char __initdata sio_name_W83627EHF[] = "W83627EHF"; static const char __initdata sio_name_W83627EHG[] = "W83627EHG"; static const char __initdata sio_name_W83627DHG[] = "W83627DHG"; static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P"; static const char __initdata sio_name_W83667HG[] = "W83667HG"; static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B"; static const char __initdata sio_name_NCT6775[] = "NCT6775F"; static const char __initdata sio_name_NCT6776[] = "NCT6776F"; u16 val; const char *sio_name; superio_enter(sioaddr); if (force_id) val = force_id; else val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) | superio_inb(sioaddr, SIO_REG_DEVID + 1); switch (val & SIO_ID_MASK) { case SIO_W83627EHF_ID: sio_data->kind = w83627ehf; sio_name = sio_name_W83627EHF; break; case SIO_W83627EHG_ID: sio_data->kind = w83627ehf; sio_name = sio_name_W83627EHG; break; case SIO_W83627DHG_ID: sio_data->kind = w83627dhg; sio_name = sio_name_W83627DHG; break; case SIO_W83627DHG_P_ID: sio_data->kind = w83627dhg_p; sio_name = sio_name_W83627DHG_P; break; case SIO_W83667HG_ID: sio_data->kind = w83667hg; sio_name = sio_name_W83667HG; break; case SIO_W83667HG_B_ID: sio_data->kind = w83667hg_b; sio_name = sio_name_W83667HG_B; break; case SIO_NCT6775_ID: sio_data->kind = nct6775; sio_name = sio_name_NCT6775; break; case SIO_NCT6776_ID: sio_data->kind = nct6776; sio_name = sio_name_NCT6776; break; default: if (val != 0xffff) pr_debug("unsupported chip ID: 0x%04x\n", val); superio_exit(sioaddr); return -ENODEV; } /* We have a known chip, find the HWM I/O address */ superio_select(sioaddr, W83627EHF_LD_HWM); val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) | superio_inb(sioaddr, SIO_REG_ADDR + 1); *addr = val & IOREGION_ALIGNMENT; if (*addr == 0) { pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); superio_exit(sioaddr); return -ENODEV; } /* Activate logical device if needed */ val = superio_inb(sioaddr, SIO_REG_ENABLE); if (!(val & 0x01)) { pr_warn("Forcibly enabling Super-I/O. " "Sensor is probably unusable.\n"); superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); } superio_exit(sioaddr); pr_info("Found %s chip at %#x\n", sio_name, *addr); sio_data->sioreg = sioaddr; return 0; } /* when Super-I/O functions move to a separate file, the Super-I/O * bus will manage the lifetime of the device and this module will only keep * track of the w83627ehf driver. But since we platform_device_alloc(), we * must keep track of the device */ static struct platform_device *pdev; static int __init sensors_w83627ehf_init(void) { int err; unsigned short address; struct resource res; struct w83627ehf_sio_data sio_data; /* initialize sio_data->kind and sio_data->sioreg. * * when Super-I/O functions move to a separate file, the Super-I/O * driver will probe 0x2e and 0x4e and auto-detect the presence of a * w83627ehf hardware monitor, and call probe() */ if (w83627ehf_find(0x2e, &address, &sio_data) && w83627ehf_find(0x4e, &address, &sio_data)) return -ENODEV; err = platform_driver_register(&w83627ehf_driver); if (err) goto exit; pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; pr_err("Device allocation failed\n"); goto exit_unregister; } err = platform_device_add_data(pdev, &sio_data, sizeof(struct w83627ehf_sio_data)); if (err) { pr_err("Platform data allocation failed\n"); goto exit_device_put; } memset(&res, 0, sizeof(res)); res.name = DRVNAME; res.start = address + IOREGION_OFFSET; res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; res.flags = IORESOURCE_IO; err = acpi_check_resource_conflict(&res); if (err) goto exit_device_put; err = platform_device_add_resources(pdev, &res, 1); if (err) { pr_err("Device resource addition failed (%d)\n", err); goto exit_device_put; } /* platform_device_add calls probe() */ err = platform_device_add(pdev); if (err) { pr_err("Device addition failed (%d)\n", err); goto exit_device_put; } return 0; exit_device_put: platform_device_put(pdev); exit_unregister: platform_driver_unregister(&w83627ehf_driver); exit: return err; } static void __exit sensors_w83627ehf_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&w83627ehf_driver); } MODULE_AUTHOR("Jean Delvare "); MODULE_DESCRIPTION("W83627EHF driver"); MODULE_LICENSE("GPL"); module_init(sensors_w83627ehf_init); module_exit(sensors_w83627ehf_exit);